| /* |
| * PCI Express PCI Hot Plug Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2003-2004 Intel Corporation |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/signal.h> |
| #include <linux/jiffies.h> |
| #include <linux/timer.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| |
| #include "../pci.h" |
| #include "pciehp.h" |
| |
| static atomic_t pciehp_num_controllers = ATOMIC_INIT(0); |
| |
| struct ctrl_reg { |
| u8 cap_id; |
| u8 nxt_ptr; |
| u16 cap_reg; |
| u32 dev_cap; |
| u16 dev_ctrl; |
| u16 dev_status; |
| u32 lnk_cap; |
| u16 lnk_ctrl; |
| u16 lnk_status; |
| u32 slot_cap; |
| u16 slot_ctrl; |
| u16 slot_status; |
| u16 root_ctrl; |
| u16 rsvp; |
| u32 root_status; |
| } __attribute__ ((packed)); |
| |
| /* offsets to the controller registers based on the above structure layout */ |
| enum ctrl_offsets { |
| PCIECAPID = offsetof(struct ctrl_reg, cap_id), |
| NXTCAPPTR = offsetof(struct ctrl_reg, nxt_ptr), |
| CAPREG = offsetof(struct ctrl_reg, cap_reg), |
| DEVCAP = offsetof(struct ctrl_reg, dev_cap), |
| DEVCTRL = offsetof(struct ctrl_reg, dev_ctrl), |
| DEVSTATUS = offsetof(struct ctrl_reg, dev_status), |
| LNKCAP = offsetof(struct ctrl_reg, lnk_cap), |
| LNKCTRL = offsetof(struct ctrl_reg, lnk_ctrl), |
| LNKSTATUS = offsetof(struct ctrl_reg, lnk_status), |
| SLOTCAP = offsetof(struct ctrl_reg, slot_cap), |
| SLOTCTRL = offsetof(struct ctrl_reg, slot_ctrl), |
| SLOTSTATUS = offsetof(struct ctrl_reg, slot_status), |
| ROOTCTRL = offsetof(struct ctrl_reg, root_ctrl), |
| ROOTSTATUS = offsetof(struct ctrl_reg, root_status), |
| }; |
| |
| static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| return pci_read_config_word(dev, ctrl->cap_base + reg, value); |
| } |
| |
| static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| return pci_read_config_dword(dev, ctrl->cap_base + reg, value); |
| } |
| |
| static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| return pci_write_config_word(dev, ctrl->cap_base + reg, value); |
| } |
| |
| static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| return pci_write_config_dword(dev, ctrl->cap_base + reg, value); |
| } |
| |
| /* Field definitions in PCI Express Capabilities Register */ |
| #define CAP_VER 0x000F |
| #define DEV_PORT_TYPE 0x00F0 |
| #define SLOT_IMPL 0x0100 |
| #define MSG_NUM 0x3E00 |
| |
| /* Device or Port Type */ |
| #define NAT_ENDPT 0x00 |
| #define LEG_ENDPT 0x01 |
| #define ROOT_PORT 0x04 |
| #define UP_STREAM 0x05 |
| #define DN_STREAM 0x06 |
| #define PCIE_PCI_BRDG 0x07 |
| #define PCI_PCIE_BRDG 0x10 |
| |
| /* Field definitions in Device Capabilities Register */ |
| #define DATTN_BUTTN_PRSN 0x1000 |
| #define DATTN_LED_PRSN 0x2000 |
| #define DPWR_LED_PRSN 0x4000 |
| |
| /* Field definitions in Link Capabilities Register */ |
| #define MAX_LNK_SPEED 0x000F |
| #define MAX_LNK_WIDTH 0x03F0 |
| |
| /* Link Width Encoding */ |
| #define LNK_X1 0x01 |
| #define LNK_X2 0x02 |
| #define LNK_X4 0x04 |
| #define LNK_X8 0x08 |
| #define LNK_X12 0x0C |
| #define LNK_X16 0x10 |
| #define LNK_X32 0x20 |
| |
| /*Field definitions of Link Status Register */ |
| #define LNK_SPEED 0x000F |
| #define NEG_LINK_WD 0x03F0 |
| #define LNK_TRN_ERR 0x0400 |
| #define LNK_TRN 0x0800 |
| #define SLOT_CLK_CONF 0x1000 |
| |
| /* Field definitions in Slot Capabilities Register */ |
| #define ATTN_BUTTN_PRSN 0x00000001 |
| #define PWR_CTRL_PRSN 0x00000002 |
| #define MRL_SENS_PRSN 0x00000004 |
| #define ATTN_LED_PRSN 0x00000008 |
| #define PWR_LED_PRSN 0x00000010 |
| #define HP_SUPR_RM_SUP 0x00000020 |
| #define HP_CAP 0x00000040 |
| #define SLOT_PWR_VALUE 0x000003F8 |
| #define SLOT_PWR_LIMIT 0x00000C00 |
| #define PSN 0xFFF80000 /* PSN: Physical Slot Number */ |
| |
| /* Field definitions in Slot Control Register */ |
| #define ATTN_BUTTN_ENABLE 0x0001 |
| #define PWR_FAULT_DETECT_ENABLE 0x0002 |
| #define MRL_DETECT_ENABLE 0x0004 |
| #define PRSN_DETECT_ENABLE 0x0008 |
| #define CMD_CMPL_INTR_ENABLE 0x0010 |
| #define HP_INTR_ENABLE 0x0020 |
| #define ATTN_LED_CTRL 0x00C0 |
| #define PWR_LED_CTRL 0x0300 |
| #define PWR_CTRL 0x0400 |
| #define EMI_CTRL 0x0800 |
| |
| /* Attention indicator and Power indicator states */ |
| #define LED_ON 0x01 |
| #define LED_BLINK 0x10 |
| #define LED_OFF 0x11 |
| |
| /* Power Control Command */ |
| #define POWER_ON 0 |
| #define POWER_OFF 0x0400 |
| |
| /* EMI Status defines */ |
| #define EMI_DISENGAGED 0 |
| #define EMI_ENGAGED 1 |
| |
| /* Field definitions in Slot Status Register */ |
| #define ATTN_BUTTN_PRESSED 0x0001 |
| #define PWR_FAULT_DETECTED 0x0002 |
| #define MRL_SENS_CHANGED 0x0004 |
| #define PRSN_DETECT_CHANGED 0x0008 |
| #define CMD_COMPLETED 0x0010 |
| #define MRL_STATE 0x0020 |
| #define PRSN_STATE 0x0040 |
| #define EMI_STATE 0x0080 |
| #define EMI_STATUS_BIT 7 |
| |
| static irqreturn_t pcie_isr(int irq, void *dev_id); |
| static void start_int_poll_timer(struct controller *ctrl, int sec); |
| |
| /* This is the interrupt polling timeout function. */ |
| static void int_poll_timeout(unsigned long data) |
| { |
| struct controller *ctrl = (struct controller *)data; |
| |
| /* Poll for interrupt events. regs == NULL => polling */ |
| pcie_isr(0, ctrl); |
| |
| init_timer(&ctrl->poll_timer); |
| if (!pciehp_poll_time) |
| pciehp_poll_time = 2; /* default polling interval is 2 sec */ |
| |
| start_int_poll_timer(ctrl, pciehp_poll_time); |
| } |
| |
| /* This function starts the interrupt polling timer. */ |
| static void start_int_poll_timer(struct controller *ctrl, int sec) |
| { |
| /* Clamp to sane value */ |
| if ((sec <= 0) || (sec > 60)) |
| sec = 2; |
| |
| ctrl->poll_timer.function = &int_poll_timeout; |
| ctrl->poll_timer.data = (unsigned long)ctrl; |
| ctrl->poll_timer.expires = jiffies + sec * HZ; |
| add_timer(&ctrl->poll_timer); |
| } |
| |
| static inline int pciehp_request_irq(struct controller *ctrl) |
| { |
| int retval, irq = ctrl->pci_dev->irq; |
| |
| /* Install interrupt polling timer. Start with 10 sec delay */ |
| if (pciehp_poll_mode) { |
| init_timer(&ctrl->poll_timer); |
| start_int_poll_timer(ctrl, 10); |
| return 0; |
| } |
| |
| /* Installs the interrupt handler */ |
| retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl); |
| if (retval) |
| err("Cannot get irq %d for the hotplug controller\n", irq); |
| return retval; |
| } |
| |
| static inline void pciehp_free_irq(struct controller *ctrl) |
| { |
| if (pciehp_poll_mode) |
| del_timer_sync(&ctrl->poll_timer); |
| else |
| free_irq(ctrl->pci_dev->irq, ctrl); |
| } |
| |
| static int pcie_poll_cmd(struct controller *ctrl) |
| { |
| u16 slot_status; |
| int timeout = 1000; |
| |
| if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { |
| if (slot_status & CMD_COMPLETED) { |
| pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); |
| return 1; |
| } |
| } |
| while (timeout > 1000) { |
| msleep(10); |
| timeout -= 10; |
| if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { |
| if (slot_status & CMD_COMPLETED) { |
| pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); |
| return 1; |
| } |
| } |
| } |
| return 0; /* timeout */ |
| } |
| |
| static void pcie_wait_cmd(struct controller *ctrl, int poll) |
| { |
| unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; |
| unsigned long timeout = msecs_to_jiffies(msecs); |
| int rc; |
| |
| if (poll) |
| rc = pcie_poll_cmd(ctrl); |
| else |
| rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); |
| if (!rc) |
| dbg("Command not completed in 1000 msec\n"); |
| } |
| |
| /** |
| * pcie_write_cmd - Issue controller command |
| * @ctrl: controller to which the command is issued |
| * @cmd: command value written to slot control register |
| * @mask: bitmask of slot control register to be modified |
| */ |
| static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) |
| { |
| int retval = 0; |
| u16 slot_status; |
| u16 slot_ctrl; |
| |
| mutex_lock(&ctrl->ctrl_lock); |
| |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s: Cannot read SLOTSTATUS register\n", __func__); |
| goto out; |
| } |
| |
| if (slot_status & CMD_COMPLETED) { |
| if (!ctrl->no_cmd_complete) { |
| /* |
| * After 1 sec and CMD_COMPLETED still not set, just |
| * proceed forward to issue the next command according |
| * to spec. Just print out the error message. |
| */ |
| dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", |
| __func__); |
| } else if (!NO_CMD_CMPL(ctrl)) { |
| /* |
| * This controller semms to notify of command completed |
| * event even though it supports none of power |
| * controller, attention led, power led and EMI. |
| */ |
| dbg("%s: Unexpected CMD_COMPLETED. Need to wait for " |
| "command completed event.\n", __func__); |
| ctrl->no_cmd_complete = 0; |
| } else { |
| dbg("%s: Unexpected CMD_COMPLETED. Maybe the " |
| "controller is broken.\n", __func__); |
| } |
| } |
| |
| retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); |
| if (retval) { |
| err("%s: Cannot read SLOTCTRL register\n", __func__); |
| goto out; |
| } |
| |
| slot_ctrl &= ~mask; |
| slot_ctrl |= (cmd & mask); |
| ctrl->cmd_busy = 1; |
| smp_mb(); |
| retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); |
| if (retval) |
| err("%s: Cannot write to SLOTCTRL register\n", __func__); |
| |
| /* |
| * Wait for command completion. |
| */ |
| if (!retval && !ctrl->no_cmd_complete) { |
| int poll = 0; |
| /* |
| * if hotplug interrupt is not enabled or command |
| * completed interrupt is not enabled, we need to poll |
| * command completed event. |
| */ |
| if (!(slot_ctrl & HP_INTR_ENABLE) || |
| !(slot_ctrl & CMD_CMPL_INTR_ENABLE)) |
| poll = 1; |
| pcie_wait_cmd(ctrl, poll); |
| } |
| out: |
| mutex_unlock(&ctrl->ctrl_lock); |
| return retval; |
| } |
| |
| static int hpc_check_lnk_status(struct controller *ctrl) |
| { |
| u16 lnk_status; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); |
| if (retval) { |
| err("%s: Cannot read LNKSTATUS register\n", __func__); |
| return retval; |
| } |
| |
| dbg("%s: lnk_status = %x\n", __func__, lnk_status); |
| if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) || |
| !(lnk_status & NEG_LINK_WD)) { |
| err("%s : Link Training Error occurs \n", __func__); |
| retval = -1; |
| return retval; |
| } |
| |
| return retval; |
| } |
| |
| static int hpc_get_attention_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_ctrl; |
| u8 atten_led_state; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); |
| if (retval) { |
| err("%s: Cannot read SLOTCTRL register\n", __func__); |
| return retval; |
| } |
| |
| dbg("%s: SLOTCTRL %x, value read %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_ctrl); |
| |
| atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6; |
| |
| switch (atten_led_state) { |
| case 0: |
| *status = 0xFF; /* Reserved */ |
| break; |
| case 1: |
| *status = 1; /* On */ |
| break; |
| case 2: |
| *status = 2; /* Blink */ |
| break; |
| case 3: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int hpc_get_power_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_ctrl; |
| u8 pwr_state; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); |
| if (retval) { |
| err("%s: Cannot read SLOTCTRL register\n", __func__); |
| return retval; |
| } |
| dbg("%s: SLOTCTRL %x value read %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_ctrl); |
| |
| pwr_state = (slot_ctrl & PWR_CTRL) >> 10; |
| |
| switch (pwr_state) { |
| case 0: |
| *status = 1; |
| break; |
| case 1: |
| *status = 0; |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| |
| return retval; |
| } |
| |
| static int hpc_get_latch_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_status; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s: Cannot read SLOTSTATUS register\n", __func__); |
| return retval; |
| } |
| |
| *status = (((slot_status & MRL_STATE) >> 5) == 0) ? 0 : 1; |
| |
| return 0; |
| } |
| |
| static int hpc_get_adapter_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_status; |
| u8 card_state; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s: Cannot read SLOTSTATUS register\n", __func__); |
| return retval; |
| } |
| card_state = (u8)((slot_status & PRSN_STATE) >> 6); |
| *status = (card_state == 1) ? 1 : 0; |
| |
| return 0; |
| } |
| |
| static int hpc_query_power_fault(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_status; |
| u8 pwr_fault; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s: Cannot check for power fault\n", __func__); |
| return retval; |
| } |
| pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1); |
| |
| return pwr_fault; |
| } |
| |
| static int hpc_get_emi_status(struct slot *slot, u8 *status) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_status; |
| int retval = 0; |
| |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s : Cannot check EMI status\n", __func__); |
| return retval; |
| } |
| *status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT; |
| |
| return retval; |
| } |
| |
| static int hpc_toggle_emi(struct slot *slot) |
| { |
| u16 slot_cmd; |
| u16 cmd_mask; |
| int rc; |
| |
| slot_cmd = EMI_CTRL; |
| cmd_mask = EMI_CTRL; |
| rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask); |
| slot->last_emi_toggle = get_seconds(); |
| |
| return rc; |
| } |
| |
| static int hpc_set_attention_status(struct slot *slot, u8 value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| int rc; |
| |
| cmd_mask = ATTN_LED_CTRL; |
| switch (value) { |
| case 0 : /* turn off */ |
| slot_cmd = 0x00C0; |
| break; |
| case 1: /* turn on */ |
| slot_cmd = 0x0040; |
| break; |
| case 2: /* turn blink */ |
| slot_cmd = 0x0080; |
| break; |
| default: |
| return -1; |
| } |
| rc = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| |
| return rc; |
| } |
| |
| static void hpc_set_green_led_on(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| |
| slot_cmd = 0x0100; |
| cmd_mask = PWR_LED_CTRL; |
| pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| } |
| |
| static void hpc_set_green_led_off(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| |
| slot_cmd = 0x0300; |
| cmd_mask = PWR_LED_CTRL; |
| pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| } |
| |
| static void hpc_set_green_led_blink(struct slot *slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| |
| slot_cmd = 0x0200; |
| cmd_mask = PWR_LED_CTRL; |
| pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| } |
| |
| static int hpc_power_on_slot(struct slot * slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| u16 slot_status; |
| int retval = 0; |
| |
| dbg("%s: slot->hp_slot %x\n", __func__, slot->hp_slot); |
| |
| /* Clear sticky power-fault bit from previous power failures */ |
| retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| if (retval) { |
| err("%s: Cannot read SLOTSTATUS register\n", __func__); |
| return retval; |
| } |
| slot_status &= PWR_FAULT_DETECTED; |
| if (slot_status) { |
| retval = pciehp_writew(ctrl, SLOTSTATUS, slot_status); |
| if (retval) { |
| err("%s: Cannot write to SLOTSTATUS register\n", |
| __func__); |
| return retval; |
| } |
| } |
| |
| slot_cmd = POWER_ON; |
| cmd_mask = PWR_CTRL; |
| /* Enable detection that we turned off at slot power-off time */ |
| if (!pciehp_poll_mode) { |
| slot_cmd |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | |
| PRSN_DETECT_ENABLE); |
| cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | |
| PRSN_DETECT_ENABLE); |
| } |
| |
| retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| |
| if (retval) { |
| err("%s: Write %x command failed!\n", __func__, slot_cmd); |
| return -1; |
| } |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| |
| return retval; |
| } |
| |
| static inline int pcie_mask_bad_dllp(struct controller *ctrl) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| int pos; |
| u32 reg; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| return 0; |
| pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®); |
| if (reg & PCI_ERR_COR_BAD_DLLP) |
| return 0; |
| reg |= PCI_ERR_COR_BAD_DLLP; |
| pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg); |
| return 1; |
| } |
| |
| static inline void pcie_unmask_bad_dllp(struct controller *ctrl) |
| { |
| struct pci_dev *dev = ctrl->pci_dev; |
| u32 reg; |
| int pos; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| return; |
| pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®); |
| if (!(reg & PCI_ERR_COR_BAD_DLLP)) |
| return; |
| reg &= ~PCI_ERR_COR_BAD_DLLP; |
| pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg); |
| } |
| |
| static int hpc_power_off_slot(struct slot * slot) |
| { |
| struct controller *ctrl = slot->ctrl; |
| u16 slot_cmd; |
| u16 cmd_mask; |
| int retval = 0; |
| int changed; |
| |
| dbg("%s: slot->hp_slot %x\n", __func__, slot->hp_slot); |
| |
| /* |
| * Set Bad DLLP Mask bit in Correctable Error Mask |
| * Register. This is the workaround against Bad DLLP error |
| * that sometimes happens during turning power off the slot |
| * which conforms to PCI Express 1.0a spec. |
| */ |
| changed = pcie_mask_bad_dllp(ctrl); |
| |
| slot_cmd = POWER_OFF; |
| cmd_mask = PWR_CTRL; |
| /* |
| * If we get MRL or presence detect interrupts now, the isr |
| * will notice the sticky power-fault bit too and issue power |
| * indicator change commands. This will lead to an endless loop |
| * of command completions, since the power-fault bit remains on |
| * till the slot is powered on again. |
| */ |
| if (!pciehp_poll_mode) { |
| slot_cmd &= ~(PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | |
| PRSN_DETECT_ENABLE); |
| cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | |
| PRSN_DETECT_ENABLE); |
| } |
| |
| retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| if (retval) { |
| err("%s: Write command failed!\n", __func__); |
| retval = -1; |
| goto out; |
| } |
| dbg("%s: SLOTCTRL %x write cmd %x\n", |
| __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); |
| out: |
| if (changed) |
| pcie_unmask_bad_dllp(ctrl); |
| |
| return retval; |
| } |
| |
| static irqreturn_t pcie_isr(int irq, void *dev_id) |
| { |
| struct controller *ctrl = (struct controller *)dev_id; |
| u16 detected, intr_loc; |
| struct slot *p_slot; |
| |
| /* |
| * In order to guarantee that all interrupt events are |
| * serviced, we need to re-inspect Slot Status register after |
| * clearing what is presumed to be the last pending interrupt. |
| */ |
| intr_loc = 0; |
| do { |
| if (pciehp_readw(ctrl, SLOTSTATUS, &detected)) { |
| err("%s: Cannot read SLOTSTATUS\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| detected &= (ATTN_BUTTN_PRESSED | PWR_FAULT_DETECTED | |
| MRL_SENS_CHANGED | PRSN_DETECT_CHANGED | |
| CMD_COMPLETED); |
| intr_loc |= detected; |
| if (!intr_loc) |
| return IRQ_NONE; |
| if (detected && pciehp_writew(ctrl, SLOTSTATUS, detected)) { |
| err("%s: Cannot write to SLOTSTATUS\n", __func__); |
| return IRQ_NONE; |
| } |
| } while (detected); |
| |
| dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc); |
| |
| /* Check Command Complete Interrupt Pending */ |
| if (intr_loc & CMD_COMPLETED) { |
| ctrl->cmd_busy = 0; |
| smp_mb(); |
| wake_up(&ctrl->queue); |
| } |
| |
| if (!(intr_loc & ~CMD_COMPLETED)) |
| return IRQ_HANDLED; |
| |
| p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); |
| |
| /* Check MRL Sensor Changed */ |
| if (intr_loc & MRL_SENS_CHANGED) |
| pciehp_handle_switch_change(p_slot); |
| |
| /* Check Attention Button Pressed */ |
| if (intr_loc & ATTN_BUTTN_PRESSED) |
| pciehp_handle_attention_button(p_slot); |
| |
| /* Check Presence Detect Changed */ |
| if (intr_loc & PRSN_DETECT_CHANGED) |
| pciehp_handle_presence_change(p_slot); |
| |
| /* Check Power Fault Detected */ |
| if (intr_loc & PWR_FAULT_DETECTED) |
| pciehp_handle_power_fault(p_slot); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int hpc_get_max_lnk_speed(struct slot *slot, enum pci_bus_speed *value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| enum pcie_link_speed lnk_speed; |
| u32 lnk_cap; |
| int retval = 0; |
| |
| retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap); |
| if (retval) { |
| err("%s: Cannot read LNKCAP register\n", __func__); |
| return retval; |
| } |
| |
| switch (lnk_cap & 0x000F) { |
| case 1: |
| lnk_speed = PCIE_2PT5GB; |
| break; |
| default: |
| lnk_speed = PCIE_LNK_SPEED_UNKNOWN; |
| break; |
| } |
| |
| *value = lnk_speed; |
| dbg("Max link speed = %d\n", lnk_speed); |
| |
| return retval; |
| } |
| |
| static int hpc_get_max_lnk_width(struct slot *slot, |
| enum pcie_link_width *value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| enum pcie_link_width lnk_wdth; |
| u32 lnk_cap; |
| int retval = 0; |
| |
| retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap); |
| if (retval) { |
| err("%s: Cannot read LNKCAP register\n", __func__); |
| return retval; |
| } |
| |
| switch ((lnk_cap & 0x03F0) >> 4){ |
| case 0: |
| lnk_wdth = PCIE_LNK_WIDTH_RESRV; |
| break; |
| case 1: |
| lnk_wdth = PCIE_LNK_X1; |
| break; |
| case 2: |
| lnk_wdth = PCIE_LNK_X2; |
| break; |
| case 4: |
| lnk_wdth = PCIE_LNK_X4; |
| break; |
| case 8: |
| lnk_wdth = PCIE_LNK_X8; |
| break; |
| case 12: |
| lnk_wdth = PCIE_LNK_X12; |
| break; |
| case 16: |
| lnk_wdth = PCIE_LNK_X16; |
| break; |
| case 32: |
| lnk_wdth = PCIE_LNK_X32; |
| break; |
| default: |
| lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN; |
| break; |
| } |
| |
| *value = lnk_wdth; |
| dbg("Max link width = %d\n", lnk_wdth); |
| |
| return retval; |
| } |
| |
| static int hpc_get_cur_lnk_speed(struct slot *slot, enum pci_bus_speed *value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN; |
| int retval = 0; |
| u16 lnk_status; |
| |
| retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); |
| if (retval) { |
| err("%s: Cannot read LNKSTATUS register\n", __func__); |
| return retval; |
| } |
| |
| switch (lnk_status & 0x0F) { |
| case 1: |
| lnk_speed = PCIE_2PT5GB; |
| break; |
| default: |
| lnk_speed = PCIE_LNK_SPEED_UNKNOWN; |
| break; |
| } |
| |
| *value = lnk_speed; |
| dbg("Current link speed = %d\n", lnk_speed); |
| |
| return retval; |
| } |
| |
| static int hpc_get_cur_lnk_width(struct slot *slot, |
| enum pcie_link_width *value) |
| { |
| struct controller *ctrl = slot->ctrl; |
| enum pcie_link_width lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN; |
| int retval = 0; |
| u16 lnk_status; |
| |
| retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); |
| if (retval) { |
| err("%s: Cannot read LNKSTATUS register\n", __func__); |
| return retval; |
| } |
| |
| switch ((lnk_status & 0x03F0) >> 4){ |
| case 0: |
| lnk_wdth = PCIE_LNK_WIDTH_RESRV; |
| break; |
| case 1: |
| lnk_wdth = PCIE_LNK_X1; |
| break; |
| case 2: |
| lnk_wdth = PCIE_LNK_X2; |
| break; |
| case 4: |
| lnk_wdth = PCIE_LNK_X4; |
| break; |
| case 8: |
| lnk_wdth = PCIE_LNK_X8; |
| break; |
| case 12: |
| lnk_wdth = PCIE_LNK_X12; |
| break; |
| case 16: |
| lnk_wdth = PCIE_LNK_X16; |
| break; |
| case 32: |
| lnk_wdth = PCIE_LNK_X32; |
| break; |
| default: |
| lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN; |
| break; |
| } |
| |
| *value = lnk_wdth; |
| dbg("Current link width = %d\n", lnk_wdth); |
| |
| return retval; |
| } |
| |
| static void pcie_release_ctrl(struct controller *ctrl); |
| static struct hpc_ops pciehp_hpc_ops = { |
| .power_on_slot = hpc_power_on_slot, |
| .power_off_slot = hpc_power_off_slot, |
| .set_attention_status = hpc_set_attention_status, |
| .get_power_status = hpc_get_power_status, |
| .get_attention_status = hpc_get_attention_status, |
| .get_latch_status = hpc_get_latch_status, |
| .get_adapter_status = hpc_get_adapter_status, |
| .get_emi_status = hpc_get_emi_status, |
| .toggle_emi = hpc_toggle_emi, |
| |
| .get_max_bus_speed = hpc_get_max_lnk_speed, |
| .get_cur_bus_speed = hpc_get_cur_lnk_speed, |
| .get_max_lnk_width = hpc_get_max_lnk_width, |
| .get_cur_lnk_width = hpc_get_cur_lnk_width, |
| |
| .query_power_fault = hpc_query_power_fault, |
| .green_led_on = hpc_set_green_led_on, |
| .green_led_off = hpc_set_green_led_off, |
| .green_led_blink = hpc_set_green_led_blink, |
| |
| .release_ctlr = pcie_release_ctrl, |
| .check_lnk_status = hpc_check_lnk_status, |
| }; |
| |
| int pcie_enable_notification(struct controller *ctrl) |
| { |
| u16 cmd, mask; |
| |
| cmd = PRSN_DETECT_ENABLE; |
| if (ATTN_BUTTN(ctrl)) |
| cmd |= ATTN_BUTTN_ENABLE; |
| if (POWER_CTRL(ctrl)) |
| cmd |= PWR_FAULT_DETECT_ENABLE; |
| if (MRL_SENS(ctrl)) |
| cmd |= MRL_DETECT_ENABLE; |
| if (!pciehp_poll_mode) |
| cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; |
| |
| mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | |
| PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; |
| |
| if (pcie_write_cmd(ctrl, cmd, mask)) { |
| err("%s: Cannot enable software notification\n", __func__); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void pcie_disable_notification(struct controller *ctrl) |
| { |
| u16 mask; |
| mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | |
| PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; |
| if (pcie_write_cmd(ctrl, 0, mask)) |
| warn("%s: Cannot disable software notification\n", __func__); |
| } |
| |
| static int pcie_init_notification(struct controller *ctrl) |
| { |
| if (pciehp_request_irq(ctrl)) |
| return -1; |
| if (pcie_enable_notification(ctrl)) { |
| pciehp_free_irq(ctrl); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void pcie_shutdown_notification(struct controller *ctrl) |
| { |
| pcie_disable_notification(ctrl); |
| pciehp_free_irq(ctrl); |
| } |
| |
| static int pcie_init_slot(struct controller *ctrl) |
| { |
| struct slot *slot; |
| |
| slot = kzalloc(sizeof(*slot), GFP_KERNEL); |
| if (!slot) |
| return -ENOMEM; |
| |
| slot->hp_slot = 0; |
| slot->ctrl = ctrl; |
| slot->bus = ctrl->pci_dev->subordinate->number; |
| slot->device = ctrl->slot_device_offset + slot->hp_slot; |
| slot->hpc_ops = ctrl->hpc_ops; |
| slot->number = ctrl->first_slot; |
| snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); |
| mutex_init(&slot->lock); |
| INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); |
| list_add(&slot->slot_list, &ctrl->slot_list); |
| return 0; |
| } |
| |
| static void pcie_cleanup_slot(struct controller *ctrl) |
| { |
| struct slot *slot; |
| slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list); |
| list_del(&slot->slot_list); |
| cancel_delayed_work(&slot->work); |
| flush_scheduled_work(); |
| flush_workqueue(pciehp_wq); |
| kfree(slot); |
| } |
| |
| static inline void dbg_ctrl(struct controller *ctrl) |
| { |
| int i; |
| u16 reg16; |
| struct pci_dev *pdev = ctrl->pci_dev; |
| |
| if (!pciehp_debug) |
| return; |
| |
| dbg("Hotplug Controller:\n"); |
| dbg(" Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n", pci_name(pdev), pdev->irq); |
| dbg(" Vendor ID : 0x%04x\n", pdev->vendor); |
| dbg(" Device ID : 0x%04x\n", pdev->device); |
| dbg(" Subsystem ID : 0x%04x\n", pdev->subsystem_device); |
| dbg(" Subsystem Vendor ID : 0x%04x\n", pdev->subsystem_vendor); |
| dbg(" PCIe Cap offset : 0x%02x\n", ctrl->cap_base); |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| if (!pci_resource_len(pdev, i)) |
| continue; |
| dbg(" PCI resource [%d] : 0x%llx@0x%llx\n", i, |
| (unsigned long long)pci_resource_len(pdev, i), |
| (unsigned long long)pci_resource_start(pdev, i)); |
| } |
| dbg("Slot Capabilities : 0x%08x\n", ctrl->slot_cap); |
| dbg(" Physical Slot Number : %d\n", ctrl->first_slot); |
| dbg(" Attention Button : %3s\n", ATTN_BUTTN(ctrl) ? "yes" : "no"); |
| dbg(" Power Controller : %3s\n", POWER_CTRL(ctrl) ? "yes" : "no"); |
| dbg(" MRL Sensor : %3s\n", MRL_SENS(ctrl) ? "yes" : "no"); |
| dbg(" Attention Indicator : %3s\n", ATTN_LED(ctrl) ? "yes" : "no"); |
| dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no"); |
| dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no"); |
| dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no"); |
| dbg(" Command Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes"); |
| pciehp_readw(ctrl, SLOTSTATUS, ®16); |
| dbg("Slot Status : 0x%04x\n", reg16); |
| pciehp_readw(ctrl, SLOTCTRL, ®16); |
| dbg("Slot Control : 0x%04x\n", reg16); |
| } |
| |
| struct controller *pcie_init(struct pcie_device *dev) |
| { |
| struct controller *ctrl; |
| u32 slot_cap; |
| struct pci_dev *pdev = dev->port; |
| |
| ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); |
| if (!ctrl) { |
| err("%s : out of memory\n", __func__); |
| goto abort; |
| } |
| INIT_LIST_HEAD(&ctrl->slot_list); |
| |
| ctrl->pci_dev = pdev; |
| ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| if (!ctrl->cap_base) { |
| err("%s: Cannot find PCI Express capability\n", __func__); |
| goto abort; |
| } |
| if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) { |
| err("%s: Cannot read SLOTCAP register\n", __func__); |
| goto abort; |
| } |
| |
| ctrl->slot_cap = slot_cap; |
| ctrl->first_slot = slot_cap >> 19; |
| ctrl->slot_device_offset = 0; |
| ctrl->num_slots = 1; |
| ctrl->hpc_ops = &pciehp_hpc_ops; |
| mutex_init(&ctrl->crit_sect); |
| mutex_init(&ctrl->ctrl_lock); |
| init_waitqueue_head(&ctrl->queue); |
| dbg_ctrl(ctrl); |
| /* |
| * Controller doesn't notify of command completion if the "No |
| * Command Completed Support" bit is set in Slot Capability |
| * register or the controller supports none of power |
| * controller, attention led, power led and EMI. |
| */ |
| if (NO_CMD_CMPL(ctrl) || |
| !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) |
| ctrl->no_cmd_complete = 1; |
| |
| /* Clear all remaining event bits in Slot Status register */ |
| if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) |
| goto abort_ctrl; |
| |
| /* Disable sotfware notification */ |
| pcie_disable_notification(ctrl); |
| |
| /* |
| * If this is the first controller to be initialized, |
| * initialize the pciehp work queue |
| */ |
| if (atomic_add_return(1, &pciehp_num_controllers) == 1) { |
| pciehp_wq = create_singlethread_workqueue("pciehpd"); |
| if (!pciehp_wq) |
| goto abort_ctrl; |
| } |
| |
| info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", |
| pdev->vendor, pdev->device, |
| pdev->subsystem_vendor, pdev->subsystem_device); |
| |
| if (pcie_init_slot(ctrl)) |
| goto abort_ctrl; |
| |
| if (pcie_init_notification(ctrl)) |
| goto abort_slot; |
| |
| return ctrl; |
| |
| abort_slot: |
| pcie_cleanup_slot(ctrl); |
| abort_ctrl: |
| kfree(ctrl); |
| abort: |
| return NULL; |
| } |
| |
| void pcie_release_ctrl(struct controller *ctrl) |
| { |
| pcie_shutdown_notification(ctrl); |
| pcie_cleanup_slot(ctrl); |
| /* |
| * If this is the last controller to be released, destroy the |
| * pciehp work queue |
| */ |
| if (atomic_dec_and_test(&pciehp_num_controllers)) |
| destroy_workqueue(pciehp_wq); |
| kfree(ctrl); |
| } |