diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 6c8a238..0f23d67 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,6 +34,8 @@
 #include <zlib.h>
 #include <assert.h>
 #include <sched.h>
+#include <limits.h>
+#include <stddef.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
 #include "linux/virtio_net.h"
@@ -99,13 +101,11 @@
 	/* The descriptor page for the devices. */
 	u8 *descpage;
 
-	/* The tail of the last descriptor. */
-	unsigned int desc_used;
-
 	/* A single linked list of devices. */
 	struct device *dev;
-	/* ... And an end pointer so we can easily append new devices */
-	struct device **lastdev;
+	/* And a pointer to the last device for easy append and also for
+	 * configuration appending. */
+	struct device *lastdev;
 };
 
 /* The list of Guest devices, based on command line arguments. */
@@ -191,7 +191,14 @@
 #define cpu_to_le64(v64) (v64)
 #define le16_to_cpu(v16) (v16)
 #define le32_to_cpu(v32) (v32)
-#define le64_to_cpu(v32) (v64)
+#define le64_to_cpu(v64) (v64)
+
+/* The device virtqueue descriptors are followed by feature bitmasks. */
+static u8 *get_feature_bits(struct device *dev)
+{
+	return (u8 *)(dev->desc + 1)
+		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+}
 
 /*L:100 The Launcher code itself takes us out into userspace, that scary place
  * where pointers run wild and free!  Unfortunately, like most userspace
@@ -914,21 +921,58 @@
 	write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
 }
 
+/* Resetting a device is fairly easy. */
+static void reset_device(struct device *dev)
+{
+	struct virtqueue *vq;
+
+	verbose("Resetting device %s\n", dev->name);
+	/* Clear the status. */
+	dev->desc->status = 0;
+
+	/* Clear any features they've acked. */
+	memset(get_feature_bits(dev) + dev->desc->feature_len, 0,
+	       dev->desc->feature_len);
+
+	/* Zero out the virtqueues. */
+	for (vq = dev->vq; vq; vq = vq->next) {
+		memset(vq->vring.desc, 0,
+		       vring_size(vq->config.num, getpagesize()));
+		vq->last_avail_idx = 0;
+	}
+}
+
 /* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
 static void handle_output(int fd, unsigned long addr)
 {
 	struct device *i;
 	struct virtqueue *vq;
 
-	/* Check each virtqueue. */
+	/* Check each device and virtqueue. */
 	for (i = devices.dev; i; i = i->next) {
+		/* Notifications to device descriptors reset the device. */
+		if (from_guest_phys(addr) == i->desc) {
+			reset_device(i);
+			return;
+		}
+
+		/* Notifications to virtqueues mean output has occurred. */
 		for (vq = i->vq; vq; vq = vq->next) {
-			if (vq->config.pfn == addr/getpagesize()
-			    && vq->handle_output) {
-				verbose("Output to %s\n", vq->dev->name);
-				vq->handle_output(fd, vq);
+			if (vq->config.pfn != addr/getpagesize())
+				continue;
+
+			/* Guest should acknowledge (and set features!)  before
+			 * using the device. */
+			if (i->desc->status == 0) {
+				warnx("%s gave early output", i->name);
 				return;
 			}
+
+			if (strcmp(vq->dev->name, "console") != 0)
+				verbose("Output to %s\n", vq->dev->name);
+			if (vq->handle_output)
+				vq->handle_output(fd, vq);
+			return;
 		}
 	}
 
@@ -986,54 +1030,44 @@
  *
  * All devices need a descriptor so the Guest knows it exists, and a "struct
  * device" so the Launcher can keep track of it.  We have common helper
- * routines to allocate them.
- *
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table just above the Guest's normal memory.  It returns a pointer to that
- * descriptor. */
+ * routines to allocate and manage them. */
+
+/* The layout of the device page is a "struct lguest_device_desc" followed by a
+ * number of virtqueue descriptors, then two sets of feature bits, then an
+ * array of configuration bytes.  This routine returns the configuration
+ * pointer. */
+static u8 *device_config(const struct device *dev)
+{
+	return (void *)(dev->desc + 1)
+		+ dev->desc->num_vq * sizeof(struct lguest_vqconfig)
+		+ dev->desc->feature_len * 2;
+}
+
+/* This routine allocates a new "struct lguest_device_desc" from descriptor
+ * table page just above the Guest's normal memory.  It returns a pointer to
+ * that descriptor. */
 static struct lguest_device_desc *new_dev_desc(u16 type)
 {
-	struct lguest_device_desc *d;
+	struct lguest_device_desc d = { .type = type };
+	void *p;
+
+	/* Figure out where the next device config is, based on the last one. */
+	if (devices.lastdev)
+		p = device_config(devices.lastdev)
+			+ devices.lastdev->desc->config_len;
+	else
+		p = devices.descpage;
 
 	/* We only have one page for all the descriptors. */
-	if (devices.desc_used + sizeof(*d) > getpagesize())
+	if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
 		errx(1, "Too many devices");
 
-	/* We don't need to set config_len or status: page is 0 already. */
-	d = (void *)devices.descpage + devices.desc_used;
-	d->type = type;
-	devices.desc_used += sizeof(*d);
-
-	return d;
+	/* p might not be aligned, so we memcpy in. */
+	return memcpy(p, &d, sizeof(d));
 }
 
-/* Each device descriptor is followed by some configuration information.
- * Each configuration field looks like: u8 type, u8 len, [... len bytes...].
- *
- * This routine adds a new field to an existing device's descriptor.  It only
- * works for the last device, but that's OK because that's how we use it. */
-static void add_desc_field(struct device *dev, u8 type, u8 len, const void *c)
-{
-	/* This is the last descriptor, right? */
-	assert(devices.descpage + devices.desc_used
-	       == (u8 *)(dev->desc + 1) + dev->desc->config_len);
-
-	/* We only have one page of device descriptions. */
-	if (devices.desc_used + 2 + len > getpagesize())
-		errx(1, "Too many devices");
-
-	/* Copy in the new config header: type then length. */
-	devices.descpage[devices.desc_used++] = type;
-	devices.descpage[devices.desc_used++] = len;
-	memcpy(devices.descpage + devices.desc_used, c, len);
-	devices.desc_used += len;
-
-	/* Update the device descriptor length: two byte head then data. */
-	dev->desc->config_len += 2 + len;
-}
-
-/* This routine adds a virtqueue to a device.  We specify how many descriptors
- * the virtqueue is to have. */
+/* Each device descriptor is followed by the description of its virtqueues.  We
+ * specify how many descriptors the virtqueue is to have. */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
 			  void (*handle_output)(int fd, struct virtqueue *me))
 {
@@ -1059,9 +1093,15 @@
 	/* Initialize the vring. */
 	vring_init(&vq->vring, num_descs, p, getpagesize());
 
-	/* Add the configuration information to this device's descriptor. */
-	add_desc_field(dev, VIRTIO_CONFIG_F_VIRTQUEUE,
-		       sizeof(vq->config), &vq->config);
+	/* Append virtqueue to this device's descriptor.  We use
+	 * device_config() to get the end of the device's current virtqueues;
+	 * we check that we haven't added any config or feature information
+	 * yet, otherwise we'd be overwriting them. */
+	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
+	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+	dev->desc->num_vq++;
+
+	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
 
 	/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
 	 * second.  */
@@ -1072,11 +1112,41 @@
 	 * virtqueue. */
 	vq->handle_output = handle_output;
 
-	/* Set the "Don't Notify Me" flag if we don't have a handler */
+	/* As an optimization, set the advisory "Don't Notify Me" flag if we
+	 * don't have a handler */
 	if (!handle_output)
 		vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
 }
 
+/* The first half of the feature bitmask is for us to advertise features.  The
+ * second half if for the Guest to accept features. */
+static void add_feature(struct device *dev, unsigned bit)
+{
+	u8 *features = get_feature_bits(dev);
+
+	/* We can't extend the feature bits once we've added config bytes */
+	if (dev->desc->feature_len <= bit / CHAR_BIT) {
+		assert(dev->desc->config_len == 0);
+		dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+	}
+
+	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
+}
+
+/* This routine sets the configuration fields for an existing device's
+ * descriptor.  It only works for the last device, but that's OK because that's
+ * how we use it. */
+static void set_config(struct device *dev, unsigned len, const void *conf)
+{
+	/* Check we haven't overflowed our single page. */
+	if (device_config(dev) + len > devices.descpage + getpagesize())
+		errx(1, "Too many devices");
+
+	/* Copy in the config information, and store the length. */
+	memcpy(device_config(dev), conf, len);
+	dev->desc->config_len = len;
+}
+
 /* This routine does all the creation and setup of a new device, including
  * calling new_dev_desc() to allocate the descriptor and device memory. */
 static struct device *new_device(const char *name, u16 type, int fd,
@@ -1084,14 +1154,6 @@
 {
 	struct device *dev = malloc(sizeof(*dev));
 
-	/* Append to device list.  Prepending to a single-linked list is
-	 * easier, but the user expects the devices to be arranged on the bus
-	 * in command-line order.  The first network device on the command line
-	 * is eth0, the first block device /dev/vda, etc. */
-	*devices.lastdev = dev;
-	dev->next = NULL;
-	devices.lastdev = &dev->next;
-
 	/* Now we populate the fields one at a time. */
 	dev->fd = fd;
 	/* If we have an input handler for this file descriptor, then we add it
@@ -1102,6 +1164,17 @@
 	dev->handle_input = handle_input;
 	dev->name = name;
 	dev->vq = NULL;
+
+	/* Append to device list.  Prepending to a single-linked list is
+	 * easier, but the user expects the devices to be arranged on the bus
+	 * in command-line order.  The first network device on the command line
+	 * is eth0, the first block device /dev/vda, etc. */
+	if (devices.lastdev)
+		devices.lastdev->next = dev;
+	else
+		devices.dev = dev;
+	devices.lastdev = dev;
+
 	return dev;
 }
 
@@ -1226,7 +1299,7 @@
 	int netfd, ipfd;
 	u32 ip;
 	const char *br_name = NULL;
-	u8 hwaddr[6];
+	struct virtio_net_config conf;
 
 	/* We open the /dev/net/tun device and tell it we want a tap device.  A
 	 * tap device is like a tun device, only somehow different.  To tell
@@ -1265,12 +1338,13 @@
 		ip = str2ip(arg);
 
 	/* Set up the tun device, and get the mac address for the interface. */
-	configure_device(ipfd, ifr.ifr_name, ip, hwaddr);
+	configure_device(ipfd, ifr.ifr_name, ip, conf.mac);
 
 	/* Tell Guest what MAC address to use. */
-	add_desc_field(dev, VIRTIO_CONFIG_NET_MAC_F, sizeof(hwaddr), hwaddr);
+	add_feature(dev, VIRTIO_NET_F_MAC);
+	set_config(dev, sizeof(conf), &conf);
 
-	/* We don't seed the socket any more; setup is done. */
+	/* We don't need the socket any more; setup is done. */
 	close(ipfd);
 
 	verbose("device %u: tun net %u.%u.%u.%u\n",
@@ -1458,8 +1532,7 @@
 	struct device *dev;
 	struct vblk_info *vblk;
 	void *stack;
-	u64 cap;
-	unsigned int val;
+	struct virtio_blk_config conf;
 
 	/* This is the pipe the I/O thread will use to tell us I/O is done. */
 	pipe(p);
@@ -1477,14 +1550,18 @@
 	vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
 	vblk->len = lseek64(vblk->fd, 0, SEEK_END);
 
+	/* We support barriers. */
+	add_feature(dev, VIRTIO_BLK_F_BARRIER);
+
 	/* Tell Guest how many sectors this device has. */
-	cap = cpu_to_le64(vblk->len / 512);
-	add_desc_field(dev, VIRTIO_CONFIG_BLK_F_CAPACITY, sizeof(cap), &cap);
+	conf.capacity = cpu_to_le64(vblk->len / 512);
 
 	/* Tell Guest not to put in too many descriptors at once: two are used
 	 * for the in and out elements. */
-	val = cpu_to_le32(VIRTQUEUE_NUM - 2);
-	add_desc_field(dev, VIRTIO_CONFIG_BLK_F_SEG_MAX, sizeof(val), &val);
+	add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
+
+	set_config(dev, sizeof(conf), &conf);
 
 	/* The I/O thread writes to this end of the pipe when done. */
 	vblk->done_fd = p[1];
@@ -1505,7 +1582,7 @@
 	close(vblk->workpipe[0]);
 
 	verbose("device %u: virtblock %llu sectors\n",
-		devices.device_num, cap);
+		devices.device_num, le64_to_cpu(conf.capacity));
 }
 /* That's the end of device setup. :*/
 
@@ -1610,12 +1687,12 @@
 	/* First we initialize the device list.  Since console and network
 	 * device receive input from a file descriptor, we keep an fdset
 	 * (infds) and the maximum fd number (max_infd) with the head of the
-	 * list.  We also keep a pointer to the last device, for easy appending
-	 * to the list.  Finally, we keep the next interrupt number to hand out
-	 * (1: remember that 0 is used by the timer). */
+	 * list.  We also keep a pointer to the last device.  Finally, we keep
+	 * the next interrupt number to hand out (1: remember that 0 is used by
+	 * the timer). */
 	FD_ZERO(&devices.infds);
 	devices.max_infd = -1;
-	devices.lastdev = &devices.dev;
+	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
 	cpu_id = 0;
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index c83e1c9..41962e7 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -53,5 +53,6 @@
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/lguest/Kconfig
+source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 08d4ae2..3f8a231 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -91,6 +91,4 @@
 source "drivers/auxdisplay/Kconfig"
 
 source "drivers/uio/Kconfig"
-
-source "drivers/virtio/Kconfig"
 endmenu
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index f212285..64e5148 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -440,6 +440,7 @@
 	tristate "Virtio block driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && VIRTIO
 	---help---
-	  This is the virtual block driver for lguest.  Say Y or M.
+	  This is the virtual block driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 endif # BLK_DEV
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 924ddd8..3b1a68d 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -7,8 +7,10 @@
 #include <linux/scatterlist.h>
 
 #define VIRTIO_MAX_SG	(3+MAX_PHYS_SEGMENTS)
+#define PART_BITS 4
 
-static unsigned char virtblk_index = 'a';
+static int major, index;
+
 struct virtio_blk
 {
 	spinlock_t lock;
@@ -36,7 +38,7 @@
 	struct virtio_blk_inhdr in_hdr;
 };
 
-static bool blk_done(struct virtqueue *vq)
+static void blk_done(struct virtqueue *vq)
 {
 	struct virtio_blk *vblk = vq->vdev->priv;
 	struct virtblk_req *vbr;
@@ -65,7 +67,6 @@
 	/* In case queue is stopped waiting for more buffers. */
 	blk_start_queue(vblk->disk->queue);
 	spin_unlock_irqrestore(&vblk->lock, flags);
-	return true;
 }
 
 static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
@@ -153,20 +154,37 @@
 			      (void __user *)data);
 }
 
+/* We provide getgeo only to please some old bootloader/partitioning tools */
+static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
+{
+	/* some standard values, similar to sd */
+	geo->heads = 1 << 6;
+	geo->sectors = 1 << 5;
+	geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+	return 0;
+}
+
 static struct block_device_operations virtblk_fops = {
-	.ioctl = virtblk_ioctl,
-	.owner = THIS_MODULE,
+	.ioctl  = virtblk_ioctl,
+	.owner  = THIS_MODULE,
+	.getgeo = virtblk_getgeo,
 };
 
+static int index_to_minor(int index)
+{
+	return index << PART_BITS;
+}
+
 static int virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
-	int err, major;
-	void *token;
-	unsigned int len;
+	int err;
 	u64 cap;
 	u32 v;
 
+	if (index_to_minor(index) >= 1 << MINORBITS)
+		return -ENOSPC;
+
 	vdev->priv = vblk = kmalloc(sizeof(*vblk), GFP_KERNEL);
 	if (!vblk) {
 		err = -ENOMEM;
@@ -178,7 +196,7 @@
 	vblk->vdev = vdev;
 
 	/* We expect one virtqueue, for output. */
-	vblk->vq = vdev->config->find_vq(vdev, blk_done);
+	vblk->vq = vdev->config->find_vq(vdev, 0, blk_done);
 	if (IS_ERR(vblk->vq)) {
 		err = PTR_ERR(vblk->vq);
 		goto out_free_vblk;
@@ -190,17 +208,11 @@
 		goto out_free_vq;
 	}
 
-	major = register_blkdev(0, "virtblk");
-	if (major < 0) {
-		err = major;
-		goto out_mempool;
-	}
-
 	/* FIXME: How many partitions?  How long is a piece of string? */
-	vblk->disk = alloc_disk(1 << 4);
+	vblk->disk = alloc_disk(1 << PART_BITS);
 	if (!vblk->disk) {
 		err = -ENOMEM;
-		goto out_unregister_blkdev;
+		goto out_mempool;
 	}
 
 	vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
@@ -209,22 +221,32 @@
 		goto out_put_disk;
 	}
 
-	sprintf(vblk->disk->disk_name, "vd%c", virtblk_index++);
+	if (index < 26) {
+		sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
+	} else if (index < (26 + 1) * 26) {
+		sprintf(vblk->disk->disk_name, "vd%c%c",
+			'a' + index / 26 - 1, 'a' + index % 26);
+	} else {
+		const unsigned int m1 = (index / 26 - 1) / 26 - 1;
+		const unsigned int m2 = (index / 26 - 1) % 26;
+		const unsigned int m3 =  index % 26;
+		sprintf(vblk->disk->disk_name, "vd%c%c%c",
+			'a' + m1, 'a' + m2, 'a' + m3);
+	}
+
 	vblk->disk->major = major;
-	vblk->disk->first_minor = 0;
+	vblk->disk->first_minor = index_to_minor(index);
 	vblk->disk->private_data = vblk;
 	vblk->disk->fops = &virtblk_fops;
+	index++;
 
 	/* If barriers are supported, tell block layer that queue is ordered */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_BLK_F, &len);
-	if (virtio_use_bit(vdev, token, len, VIRTIO_BLK_F_BARRIER))
+	if (vdev->config->feature(vdev, VIRTIO_BLK_F_BARRIER))
 		blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_CAPACITY, &cap);
-	if (err) {
-		dev_err(&vdev->dev, "Bad/missing capacity in config\n");
-		goto out_cleanup_queue;
-	}
+	/* Host must always specify the capacity. */
+	__virtio_config_val(vdev, offsetof(struct virtio_blk_config, capacity),
+			    &cap);
 
 	/* If capacity is too big, truncate with warning. */
 	if ((sector_t)cap != cap) {
@@ -234,31 +256,25 @@
 	}
 	set_capacity(vblk->disk, cap);
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SIZE_MAX, &v);
+	/* Host can optionally specify maximum segment size and number of
+	 * segments. */
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_SIZE_MAX,
+				offsetof(struct virtio_blk_config, size_max),
+				&v);
 	if (!err)
 		blk_queue_max_segment_size(vblk->disk->queue, v);
-	else if (err != -ENOENT) {
-		dev_err(&vdev->dev, "Bad SIZE_MAX in config\n");
-		goto out_cleanup_queue;
-	}
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SEG_MAX, &v);
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
+				offsetof(struct virtio_blk_config, seg_max),
+				&v);
 	if (!err)
 		blk_queue_max_hw_segments(vblk->disk->queue, v);
-	else if (err != -ENOENT) {
-		dev_err(&vdev->dev, "Bad SEG_MAX in config\n");
-		goto out_cleanup_queue;
-	}
 
 	add_disk(vblk->disk);
 	return 0;
 
-out_cleanup_queue:
-	blk_cleanup_queue(vblk->disk->queue);
 out_put_disk:
 	put_disk(vblk->disk);
-out_unregister_blkdev:
-	unregister_blkdev(major, "virtblk");
 out_mempool:
 	mempool_destroy(vblk->pool);
 out_free_vq:
@@ -274,12 +290,16 @@
 	struct virtio_blk *vblk = vdev->priv;
 	int major = vblk->disk->major;
 
+	/* Nothing should be pending. */
 	BUG_ON(!list_empty(&vblk->reqs));
+
+	/* Stop all the virtqueues. */
+	vdev->config->reset(vdev);
+
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	unregister_blkdev(major, "virtblk");
 	mempool_destroy(vblk->pool);
-	/* There should be nothing in the queue now, so no need to shutdown */
 	vdev->config->del_vq(vblk->vq);
 	kfree(vblk);
 }
@@ -299,11 +319,15 @@
 
 static int __init init(void)
 {
+	major = register_blkdev(0, "virtblk");
+	if (major < 0)
+		return major;
 	return register_virtio_driver(&virtio_blk);
 }
 
 static void __exit fini(void)
 {
+	unregister_blkdev(major, "virtblk");
 	unregister_virtio_driver(&virtio_blk);
 }
 module_init(init);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index e34da5c..dc17fe3 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -158,13 +158,13 @@
 	/* Find the input queue. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, NULL);
+	in_vq = vdev->config->find_vq(vdev, 0, NULL);
 	if (IS_ERR(in_vq)) {
 		err = PTR_ERR(in_vq);
 		goto free;
 	}
 
-	out_vq = vdev->config->find_vq(vdev, NULL);
+	out_vq = vdev->config->find_vq(vdev, 1, NULL);
 	if (IS_ERR(out_vq)) {
 		err = PTR_ERR(out_vq);
 		goto free_in_vq;
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e2eec38..84f85e2 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -52,57 +52,82 @@
 /*D:130
  * Device configurations
  *
- * The configuration information for a device consists of a series of fields.
- * We don't really care what they are: the Launcher set them up, and the driver
- * will look at them during setup.
+ * The configuration information for a device consists of one or more
+ * virtqueues, a feature bitmaks, and some configuration bytes.  The
+ * configuration bytes don't really matter to us: the Launcher sets them up, and
+ * the driver will look at them during setup.
  *
- * For us these fields come immediately after that device's descriptor in the
- * lguest_devices page.
- *
- * Each field starts with a "type" byte, a "length" byte, then that number of
- * bytes of configuration information.  The device descriptor tells us the
- * total configuration length so we know when we've reached the last field. */
+ * A convenient routine to return the device's virtqueue config array:
+ * immediately after the descriptor. */
+static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
+{
+	return (void *)(desc + 1);
+}
 
-/* type + length bytes */
-#define FHDR_LEN 2
+/* The features come immediately after the virtqueues. */
+static u8 *lg_features(const struct lguest_device_desc *desc)
+{
+	return (void *)(lg_vq(desc) + desc->num_vq);
+}
 
-/* This finds the first field of a given type for a device's configuration. */
-static void *lg_find(struct virtio_device *vdev, u8 type, unsigned int *len)
+/* The config space comes after the two feature bitmasks. */
+static u8 *lg_config(const struct lguest_device_desc *desc)
+{
+	return lg_features(desc) + desc->feature_len * 2;
+}
+
+/* The total size of the config page used by this device (incl. desc) */
+static unsigned desc_size(const struct lguest_device_desc *desc)
+{
+	return sizeof(*desc)
+		+ desc->num_vq * sizeof(struct lguest_vqconfig)
+		+ desc->feature_len * 2
+		+ desc->config_len;
+}
+
+/* This tests (and acknowleges) a feature bit. */
+static bool lg_feature(struct virtio_device *vdev, unsigned fbit)
 {
 	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
-	int i;
+	u8 *features;
 
-	for (i = 0; i < desc->config_len; i += FHDR_LEN + desc->config[i+1]) {
-		if (desc->config[i] == type) {
-			/* Mark it used, so Host can know we looked at it, and
-			 * also so we won't find the same one twice. */
-			desc->config[i] |= 0x80;
-			/* Remember, the second byte is the length. */
-			*len = desc->config[i+1];
-			/* We return a pointer to the field header. */
-			return desc->config + i;
-		}
-	}
+	/* Obviously if they ask for a feature off the end of our feature
+	 * bitmap, it's not set. */
+	if (fbit / 8 > desc->feature_len)
+		return false;
 
-	/* Not found: return NULL for failure. */
-	return NULL;
+	/* The feature bitmap comes after the virtqueues. */
+	features = lg_features(desc);
+	if (!(features[fbit / 8] & (1 << (fbit % 8))))
+		return false;
+
+	/* We set the matching bit in the other half of the bitmap to tell the
+	 * Host we want to use this feature.  We don't use this yet, but we
+	 * could in future. */
+	features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
+	return true;
 }
 
 /* Once they've found a field, getting a copy of it is easy. */
-static void lg_get(struct virtio_device *vdev, void *token,
+static void lg_get(struct virtio_device *vdev, unsigned int offset,
 		   void *buf, unsigned len)
 {
-	/* Check they didn't ask for more than the length of the field! */
-	BUG_ON(len > ((u8 *)token)[1]);
-	memcpy(buf, token + FHDR_LEN, len);
+	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+
+	/* Check they didn't ask for more than the length of the config! */
+	BUG_ON(offset + len > desc->config_len);
+	memcpy(buf, lg_config(desc) + offset, len);
 }
 
 /* Setting the contents is also trivial. */
-static void lg_set(struct virtio_device *vdev, void *token,
+static void lg_set(struct virtio_device *vdev, unsigned int offset,
 		   const void *buf, unsigned len)
 {
-	BUG_ON(len > ((u8 *)token)[1]);
-	memcpy(token + FHDR_LEN, buf, len);
+	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+
+	/* Check they didn't ask for more than the length of the config! */
+	BUG_ON(offset + len > desc->config_len);
+	memcpy(lg_config(desc) + offset, buf, len);
 }
 
 /* The operations to get and set the status word just access the status field
@@ -114,9 +139,20 @@
 
 static void lg_set_status(struct virtio_device *vdev, u8 status)
 {
+	BUG_ON(!status);
 	to_lgdev(vdev)->desc->status = status;
 }
 
+/* To reset the device, we (ab)use the NOTIFY hypercall, with the descriptor
+ * address of the device.  The Host will zero the status and all the
+ * features. */
+static void lg_reset(struct virtio_device *vdev)
+{
+	unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
+
+	hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+}
+
 /*
  * Virtqueues
  *
@@ -165,39 +201,29 @@
  *
  * So we provide devices with a "find virtqueue and set it up" function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
-				    bool (*callback)(struct virtqueue *vq))
+				    unsigned index,
+				    void (*callback)(struct virtqueue *vq))
 {
+	struct lguest_device *ldev = to_lgdev(vdev);
 	struct lguest_vq_info *lvq;
 	struct virtqueue *vq;
-	unsigned int len;
-	void *token;
 	int err;
 
-	/* Look for a field of the correct type to mark a virtqueue.  Note that
-	 * if this succeeds, then the type will be changed so it won't be found
-	 * again, and future lg_find_vq() calls will find the next
-	 * virtqueue (if any). */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_F_VIRTQUEUE, &len);
-	if (!token)
+	/* We must have this many virtqueues. */
+	if (index >= ldev->desc->num_vq)
 		return ERR_PTR(-ENOENT);
 
 	lvq = kmalloc(sizeof(*lvq), GFP_KERNEL);
 	if (!lvq)
 		return ERR_PTR(-ENOMEM);
 
-	/* Note: we could use a configuration space inside here, just like we
-	 * do for the device.  This would allow expansion in future, because
-	 * our configuration system is designed to be expansible.  But this is
-	 * way easier. */
-	if (len != sizeof(lvq->config)) {
-		dev_err(&vdev->dev, "Unexpected virtio config len %u\n", len);
-		err = -EIO;
-		goto free_lvq;
-	}
-	/* Make a copy of the "struct lguest_vqconfig" field.  We need a copy
-	 * because the config space might not be aligned correctly. */
-	vdev->config->get(vdev, token, &lvq->config, sizeof(lvq->config));
+	/* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+	 * the descriptor.  We need a copy because the config space might not
+	 * be aligned correctly. */
+	memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
 
+	printk("Mapping virtqueue %i addr %lx\n", index,
+	       (unsigned long)lvq->config.pfn << PAGE_SHIFT);
 	/* Figure out how many pages the ring will take, and map that memory */
 	lvq->pages = lguest_map((unsigned long)lvq->config.pfn << PAGE_SHIFT,
 				DIV_ROUND_UP(vring_size(lvq->config.num,
@@ -259,11 +285,12 @@
 
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
-	.find = lg_find,
+	.feature = lg_feature,
 	.get = lg_get,
 	.set = lg_set,
 	.get_status = lg_get_status,
 	.set_status = lg_set_status,
+	.reset = lg_reset,
 	.find_vq = lg_find_vq,
 	.del_vq = lg_del_vq,
 };
@@ -329,13 +356,14 @@
 	struct lguest_device_desc *d;
 
 	/* We start at the page beginning, and skip over each entry. */
-	for (i = 0; i < PAGE_SIZE; i += sizeof(*d) + d->config_len) {
+	for (i = 0; i < PAGE_SIZE; i += desc_size(d)) {
 		d = lguest_devices + i;
 
 		/* Once we hit a zero, stop. */
 		if (d->type == 0)
 			break;
 
+		printk("Device at %i has size %u\n", i, desc_size(d));
 		add_lguest_device(d);
 	}
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 55d224c..f234ba3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3114,6 +3114,7 @@
 	tristate "Virtio network driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && VIRTIO
 	---help---
-	  This is the virtual network driver for lguest.  Say Y or M.
+	  This is the virtual network driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 endif # NETDEVICES
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5413dbf..e66de0c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -24,6 +24,13 @@
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
 
+static int napi_weight = 128;
+module_param(napi_weight, int, 0444);
+
+static int csum = 1, gso = 1;
+module_param(csum, bool, 0444);
+module_param(gso, bool, 0444);
+
 /* FIXME: MTU in config. */
 #define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
 
@@ -52,13 +59,14 @@
 	sg_init_one(sg, skb_vnet_hdr(skb), sizeof(struct virtio_net_hdr));
 }
 
-static bool skb_xmit_done(struct virtqueue *rvq)
+static void skb_xmit_done(struct virtqueue *svq)
 {
-	struct virtnet_info *vi = rvq->vdev->priv;
+	struct virtnet_info *vi = svq->vdev->priv;
 
-	/* In case we were waiting for output buffers. */
+	/* Suppress further interrupts. */
+	svq->vq_ops->disable_cb(svq);
+	/* We were waiting for more output buffers. */
 	netif_wake_queue(vi->dev);
-	return true;
 }
 
 static void receive_skb(struct net_device *dev, struct sk_buff *skb,
@@ -83,28 +91,16 @@
 
 	if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
 		pr_debug("Needs csum!\n");
-		skb->ip_summed = CHECKSUM_PARTIAL;
-		skb->csum_start = hdr->csum_start;
-		skb->csum_offset = hdr->csum_offset;
-		if (skb->csum_start > skb->len - 2
-		    || skb->csum_offset > skb->len - 2) {
-			if (net_ratelimit())
-				printk(KERN_WARNING "%s: csum=%u/%u len=%u\n",
-				       dev->name, skb->csum_start,
-				       skb->csum_offset, skb->len);
+		if (!skb_partial_csum_set(skb,hdr->csum_start,hdr->csum_offset))
 			goto frame_err;
-		}
 	}
 
 	if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
 		pr_debug("GSO!\n");
-		switch (hdr->gso_type) {
+		switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
 		case VIRTIO_NET_HDR_GSO_TCPV4:
 			skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
 			break;
-		case VIRTIO_NET_HDR_GSO_TCPV4_ECN:
-			skb_shinfo(skb)->gso_type = SKB_GSO_TCP_ECN;
-			break;
 		case VIRTIO_NET_HDR_GSO_UDP:
 			skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
 			break;
@@ -118,6 +114,9 @@
 			goto frame_err;
 		}
 
+		if (hdr->gso_type & VIRTIO_NET_HDR_GSO_ECN)
+			skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
+
 		skb_shinfo(skb)->gso_size = hdr->gso_size;
 		if (skb_shinfo(skb)->gso_size == 0) {
 			if (net_ratelimit())
@@ -170,12 +169,14 @@
 	vi->rvq->vq_ops->kick(vi->rvq);
 }
 
-static bool skb_recv_done(struct virtqueue *rvq)
+static void skb_recv_done(struct virtqueue *rvq)
 {
 	struct virtnet_info *vi = rvq->vdev->priv;
-	netif_rx_schedule(vi->dev, &vi->napi);
-	/* Suppress further interrupts. */
-	return false;
+	/* Schedule NAPI, Suppress further interrupts if successful. */
+	if (netif_rx_schedule_prep(vi->dev, &vi->napi)) {
+		rvq->vq_ops->disable_cb(rvq);
+		__netif_rx_schedule(vi->dev, &vi->napi);
+	}
 }
 
 static int virtnet_poll(struct napi_struct *napi, int budget)
@@ -201,7 +202,7 @@
 	/* Out of packets? */
 	if (received < budget) {
 		netif_rx_complete(vi->dev, napi);
-		if (unlikely(!vi->rvq->vq_ops->restart(vi->rvq))
+		if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq))
 		    && netif_rx_reschedule(vi->dev, napi))
 			goto again;
 	}
@@ -236,8 +237,6 @@
 
 	pr_debug("%s: xmit %p %s\n", dev->name, skb, print_mac(mac, dest));
 
-	free_old_xmit_skbs(vi);
-
 	/* Encode metadata header at front. */
 	hdr = skb_vnet_hdr(skb);
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -250,10 +249,9 @@
 	}
 
 	if (skb_is_gso(skb)) {
+		hdr->hdr_len = skb_transport_header(skb) - skb->data;
 		hdr->gso_size = skb_shinfo(skb)->gso_size;
-		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
-			hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4_ECN;
-		else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
 			hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
 		else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
 			hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
@@ -261,19 +259,34 @@
 			hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
 		else
 			BUG();
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
+			hdr->gso_type |= VIRTIO_NET_HDR_GSO_ECN;
 	} else {
 		hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
-		hdr->gso_size = 0;
+		hdr->gso_size = hdr->hdr_len = 0;
 	}
 
 	vnet_hdr_to_sg(sg, skb);
 	num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 	__skb_queue_head(&vi->send, skb);
+
+again:
+	/* Free up any pending old buffers before queueing new ones. */
+	free_old_xmit_skbs(vi);
 	err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
 	if (err) {
 		pr_debug("%s: virtio not prepared to send\n", dev->name);
-		skb_unlink(skb, &vi->send);
 		netif_stop_queue(dev);
+
+		/* Activate callback for using skbs: if this fails it
+		 * means some were used in the meantime. */
+		if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+			printk("Unlikely: restart svq failed\n");
+			netif_start_queue(dev);
+			goto again;
+		}
+		__skb_unlink(skb, &vi->send);
+
 		return NETDEV_TX_BUSY;
 	}
 	vi->svq->vq_ops->kick(vi->svq);
@@ -285,45 +298,31 @@
 {
 	struct virtnet_info *vi = netdev_priv(dev);
 
-	try_fill_recv(vi);
-
-	/* If we didn't even get one input buffer, we're useless. */
-	if (vi->num == 0)
-		return -ENOMEM;
-
 	napi_enable(&vi->napi);
+
+	/* If all buffers were filled by other side before we napi_enabled, we
+	 * won't get another interrupt, so process any outstanding packets
+	 * now.  virtnet_poll wants re-enable the queue, so we disable here. */
+	vi->rvq->vq_ops->disable_cb(vi->rvq);
+	netif_rx_schedule(vi->dev, &vi->napi);
+
 	return 0;
 }
 
 static int virtnet_close(struct net_device *dev)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
-	struct sk_buff *skb;
 
 	napi_disable(&vi->napi);
 
-	/* networking core has neutered skb_xmit_done/skb_recv_done, so don't
-	 * worry about races vs. get(). */
-	vi->rvq->vq_ops->shutdown(vi->rvq);
-	while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
-		kfree_skb(skb);
-		vi->num--;
-	}
-	vi->svq->vq_ops->shutdown(vi->svq);
-	while ((skb = __skb_dequeue(&vi->send)) != NULL)
-		kfree_skb(skb);
-
-	BUG_ON(vi->num != 0);
 	return 0;
 }
 
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int err;
-	unsigned int len;
 	struct net_device *dev;
 	struct virtnet_info *vi;
-	void *token;
 
 	/* Allocate ourselves a network device with room for our info */
 	dev = alloc_etherdev(sizeof(struct virtnet_info));
@@ -331,7 +330,6 @@
 		return -ENOMEM;
 
 	/* Set up network device as normal. */
-	ether_setup(dev);
 	dev->open = virtnet_open;
 	dev->stop = virtnet_close;
 	dev->hard_start_xmit = start_xmit;
@@ -339,42 +337,37 @@
 	SET_NETDEV_DEV(dev, &vdev->dev);
 
 	/* Do we support "hardware" checksums? */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_NET_F, &len);
-	if (virtio_use_bit(vdev, token, len, VIRTIO_NET_F_NO_CSUM)) {
+	if (csum && vdev->config->feature(vdev, VIRTIO_NET_F_CSUM)) {
 		/* This opens up the world of extra features. */
 		dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
-		if (virtio_use_bit(vdev, token, len, VIRTIO_NET_F_TSO4))
-			dev->features |= NETIF_F_TSO;
-		if (virtio_use_bit(vdev, token, len, VIRTIO_NET_F_UFO))
-			dev->features |= NETIF_F_UFO;
-		if (virtio_use_bit(vdev, token, len, VIRTIO_NET_F_TSO4_ECN))
-			dev->features |= NETIF_F_TSO_ECN;
-		if (virtio_use_bit(vdev, token, len, VIRTIO_NET_F_TSO6))
-			dev->features |= NETIF_F_TSO6;
+		if (gso && vdev->config->feature(vdev, VIRTIO_NET_F_GSO)) {
+			dev->features |= NETIF_F_TSO | NETIF_F_UFO
+				| NETIF_F_TSO_ECN | NETIF_F_TSO6;
+		}
 	}
 
 	/* Configuration may specify what MAC to use.  Otherwise random. */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_NET_MAC_F, &len);
-	if (token) {
-		dev->addr_len = len;
-		vdev->config->get(vdev, token, dev->dev_addr, len);
+	if (vdev->config->feature(vdev, VIRTIO_NET_F_MAC)) {
+		vdev->config->get(vdev,
+				  offsetof(struct virtio_net_config, mac),
+				  dev->dev_addr, dev->addr_len);
 	} else
 		random_ether_addr(dev->dev_addr);
 
 	/* Set up our device-specific information */
 	vi = netdev_priv(dev);
-	netif_napi_add(dev, &vi->napi, virtnet_poll, 16);
+	netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight);
 	vi->dev = dev;
 	vi->vdev = vdev;
 
 	/* We expect two virtqueues, receive then send. */
-	vi->rvq = vdev->config->find_vq(vdev, skb_recv_done);
+	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
 	if (IS_ERR(vi->rvq)) {
 		err = PTR_ERR(vi->rvq);
 		goto free;
 	}
 
-	vi->svq = vdev->config->find_vq(vdev, skb_xmit_done);
+	vi->svq = vdev->config->find_vq(vdev, 1, skb_xmit_done);
 	if (IS_ERR(vi->svq)) {
 		err = PTR_ERR(vi->svq);
 		goto free_recv;
@@ -389,10 +382,22 @@
 		pr_debug("virtio_net: registering device failed\n");
 		goto free_send;
 	}
+
+	/* Last of all, set up some receive buffers. */
+	try_fill_recv(vi);
+
+	/* If we didn't even get one input buffer, we're useless. */
+	if (vi->num == 0) {
+		err = -ENOMEM;
+		goto unregister;
+	}
+
 	pr_debug("virtnet: registered device %s\n", dev->name);
 	vdev->priv = vi;
 	return 0;
 
+unregister:
+	unregister_netdev(dev);
 free_send:
 	vdev->config->del_vq(vi->svq);
 free_recv:
@@ -405,6 +410,20 @@
 static void virtnet_remove(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
+	struct sk_buff *skb;
+
+	/* Stop all the virtqueues. */
+	vdev->config->reset(vdev);
+
+	/* Free our skbs in send and recv queues, if any. */
+	while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
+		kfree_skb(skb);
+		vi->num--;
+	}
+	while ((skb = __skb_dequeue(&vi->send)) != NULL)
+		kfree_skb(skb);
+
+	BUG_ON(vi->num != 0);
 
 	vdev->config->del_vq(vi->svq);
 	vdev->config->del_vq(vi->rvq);
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 9e33fc4..3dd6294 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -1,8 +1,35 @@
 # Virtio always gets selected by whoever wants it.
 config VIRTIO
-	bool
+	tristate
 
 # Similarly the virtio ring implementation.
 config VIRTIO_RING
-	bool
+	tristate
 	depends on VIRTIO
+
+config VIRTIO_PCI
+	tristate "PCI driver for virtio devices (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select VIRTIO
+	select VIRTIO_RING
+	---help---
+	  This drivers provides support for virtio based paravirtual device
+	  drivers over PCI.  This requires that your VMM has appropriate PCI
+	  virtio backends.  Most QEMU based VMMs should support these devices
+	  (like KVM or Xen).
+
+	  Currently, the ABI is not considered stable so there is no guarantee
+	  that this version of the driver will work with your VMM.
+
+	  If unsure, say M.
+
+config VIRTIO_BALLOON
+	tristate "Virtio balloon driver (EXPERIMENTAL)"
+	select VIRTIO
+	select VIRTIO_RING
+	---help---
+	 This driver supports increasing and decreasing the amount
+	 of memory within a KVM guest.
+
+	 If unsure, say M.
+
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index f70e409..6738c44 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,2 +1,4 @@
 obj-$(CONFIG_VIRTIO) += virtio.o
 obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
+obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
+obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 69d7ea0..b535483 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -102,9 +102,13 @@
 	struct virtio_driver *drv = container_of(dev->dev.driver,
 						 struct virtio_driver, driver);
 
-	dev->config->set_status(dev, dev->config->get_status(dev)
-				& ~VIRTIO_CONFIG_S_DRIVER);
 	drv->remove(dev);
+
+	/* Driver should have reset device. */
+	BUG_ON(dev->config->get_status(dev));
+
+	/* Acknowledge the device's existence again. */
+	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 	return 0;
 }
 
@@ -130,6 +134,10 @@
 	dev->dev.bus = &virtio_bus;
 	sprintf(dev->dev.bus_id, "%u", dev->index);
 
+	/* We always start by resetting the device, in case a previous
+	 * driver messed it up.  This also tests that code path a little. */
+	dev->config->reset(dev);
+
 	/* Acknowledge that we've seen the device. */
 	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
@@ -148,55 +156,18 @@
 }
 EXPORT_SYMBOL_GPL(unregister_virtio_device);
 
-int __virtio_config_val(struct virtio_device *vdev,
-			u8 type, void *val, size_t size)
-{
-	void *token;
-	unsigned int len;
-
-	token = vdev->config->find(vdev, type, &len);
-	if (!token)
-		return -ENOENT;
-
-	if (len != size)
-		return -EIO;
-
-	vdev->config->get(vdev, token, val, size);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(__virtio_config_val);
-
-int virtio_use_bit(struct virtio_device *vdev,
-		   void *token, unsigned int len, unsigned int bitnum)
-{
-	unsigned long bits[16];
-
-	/* This makes it convenient to pass-through find() results. */
-	if (!token)
-		return 0;
-
-	/* bit not in range of this bitfield? */
-	if (bitnum * 8 >= len / 2)
-		return 0;
-
-	/* Giant feature bitfields are silly. */
-	BUG_ON(len > sizeof(bits));
-	vdev->config->get(vdev, token, bits, len);
-
-	if (!test_bit(bitnum, bits))
-		return 0;
-
-	/* Set acknowledge bit, and write it back. */
-	set_bit(bitnum + len * 8 / 2, bits);
-	vdev->config->set(vdev, token, bits, len);
-	return 1;
-}
-EXPORT_SYMBOL_GPL(virtio_use_bit);
-
 static int virtio_init(void)
 {
 	if (bus_register(&virtio_bus) != 0)
 		panic("virtio bus registration failed");
 	return 0;
 }
+
+static void __exit virtio_exit(void)
+{
+	bus_unregister(&virtio_bus);
+}
 core_initcall(virtio_init);
+module_exit(virtio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
new file mode 100644
index 0000000..622aece
--- /dev/null
+++ b/drivers/virtio/virtio_balloon.c
@@ -0,0 +1,284 @@
+/* Virtio balloon implementation, inspired by Dor Loar and Marcelo
+ * Tosatti's implementations.
+ *
+ *  Copyright 2008 Rusty Russell IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+//#define DEBUG
+#include <linux/virtio.h>
+#include <linux/virtio_balloon.h>
+#include <linux/swap.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+struct virtio_balloon
+{
+	struct virtio_device *vdev;
+	struct virtqueue *inflate_vq, *deflate_vq;
+
+	/* Where the ballooning thread waits for config to change. */
+	wait_queue_head_t config_change;
+
+	/* The thread servicing the balloon. */
+	struct task_struct *thread;
+
+	/* Waiting for host to ack the pages we released. */
+	struct completion acked;
+
+	/* Do we have to tell Host *before* we reuse pages? */
+	bool tell_host_first;
+
+	/* The pages we've told the Host we're not using. */
+	unsigned int num_pages;
+	struct list_head pages;
+
+	/* The array of pfns we tell the Host about. */
+	unsigned int num_pfns;
+	u32 pfns[256];
+};
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_BALLOON, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+static void balloon_ack(struct virtqueue *vq)
+{
+	struct virtio_balloon *vb;
+	unsigned int len;
+
+	vb = vq->vq_ops->get_buf(vq, &len);
+	if (vb)
+		complete(&vb->acked);
+}
+
+static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
+{
+	struct scatterlist sg;
+
+	sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
+
+	init_completion(&vb->acked);
+
+	/* We should always be able to add one buffer to an empty queue. */
+	if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) != 0)
+		BUG();
+	vq->vq_ops->kick(vq);
+
+	/* When host has read buffer, this completes via balloon_ack */
+	wait_for_completion(&vb->acked);
+}
+
+static void fill_balloon(struct virtio_balloon *vb, size_t num)
+{
+	/* We can only do one array worth at a time. */
+	num = min(num, ARRAY_SIZE(vb->pfns));
+
+	for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+		struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY);
+		if (!page) {
+			if (printk_ratelimit())
+				dev_printk(KERN_INFO, &vb->vdev->dev,
+					   "Out of puff! Can't get %zu pages\n",
+					   num);
+			/* Sleep for at least 1/5 of a second before retry. */
+			msleep(200);
+			break;
+		}
+		vb->pfns[vb->num_pfns] = page_to_pfn(page);
+		totalram_pages--;
+		vb->num_pages++;
+		list_add(&page->lru, &vb->pages);
+	}
+
+	/* Didn't get any?  Oh well. */
+	if (vb->num_pfns == 0)
+		return;
+
+	tell_host(vb, vb->inflate_vq);
+}
+
+static void release_pages_by_pfn(const u32 pfns[], unsigned int num)
+{
+	unsigned int i;
+
+	for (i = 0; i < num; i++) {
+		__free_page(pfn_to_page(pfns[i]));
+		totalram_pages++;
+	}
+}
+
+static void leak_balloon(struct virtio_balloon *vb, size_t num)
+{
+	struct page *page;
+
+	/* We can only do one array worth at a time. */
+	num = min(num, ARRAY_SIZE(vb->pfns));
+
+	for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+		page = list_first_entry(&vb->pages, struct page, lru);
+		list_del(&page->lru);
+		vb->pfns[vb->num_pfns] = page_to_pfn(page);
+		vb->num_pages--;
+	}
+
+	if (vb->tell_host_first) {
+		tell_host(vb, vb->deflate_vq);
+		release_pages_by_pfn(vb->pfns, vb->num_pfns);
+	} else {
+		release_pages_by_pfn(vb->pfns, vb->num_pfns);
+		tell_host(vb, vb->deflate_vq);
+	}
+}
+
+static void virtballoon_changed(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+
+	wake_up(&vb->config_change);
+}
+
+static inline int towards_target(struct virtio_balloon *vb)
+{
+	u32 v;
+	__virtio_config_val(vb->vdev,
+			    offsetof(struct virtio_balloon_config, num_pages),
+			    &v);
+	return v - vb->num_pages;
+}
+
+static void update_balloon_size(struct virtio_balloon *vb)
+{
+	__le32 actual = cpu_to_le32(vb->num_pages);
+
+	vb->vdev->config->set(vb->vdev,
+			      offsetof(struct virtio_balloon_config, actual),
+			      &actual, sizeof(actual));
+}
+
+static int balloon(void *_vballoon)
+{
+	struct virtio_balloon *vb = _vballoon;
+
+	set_freezable();
+	while (!kthread_should_stop()) {
+		int diff;
+
+		try_to_freeze();
+		wait_event_interruptible(vb->config_change,
+					 (diff = towards_target(vb)) != 0
+					 || kthread_should_stop());
+		if (diff > 0)
+			fill_balloon(vb, diff);
+		else if (diff < 0)
+			leak_balloon(vb, -diff);
+		update_balloon_size(vb);
+	}
+	return 0;
+}
+
+static int virtballoon_probe(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb;
+	int err;
+
+	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
+	if (!vb) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&vb->pages);
+	vb->num_pages = 0;
+	init_waitqueue_head(&vb->config_change);
+	vb->vdev = vdev;
+
+	/* We expect two virtqueues. */
+	vb->inflate_vq = vdev->config->find_vq(vdev, 0, balloon_ack);
+	if (IS_ERR(vb->inflate_vq)) {
+		err = PTR_ERR(vb->inflate_vq);
+		goto out_free_vb;
+	}
+
+	vb->deflate_vq = vdev->config->find_vq(vdev, 1, balloon_ack);
+	if (IS_ERR(vb->deflate_vq)) {
+		err = PTR_ERR(vb->deflate_vq);
+		goto out_del_inflate_vq;
+	}
+
+	vb->thread = kthread_run(balloon, vb, "vballoon");
+	if (IS_ERR(vb->thread)) {
+		err = PTR_ERR(vb->thread);
+		goto out_del_deflate_vq;
+	}
+
+	vb->tell_host_first
+		= vdev->config->feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
+
+	return 0;
+
+out_del_deflate_vq:
+	vdev->config->del_vq(vb->deflate_vq);
+out_del_inflate_vq:
+	vdev->config->del_vq(vb->inflate_vq);
+out_free_vb:
+	kfree(vb);
+out:
+	return err;
+}
+
+static void virtballoon_remove(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+
+	kthread_stop(vb->thread);
+
+	/* There might be pages left in the balloon: free them. */
+	while (vb->num_pages)
+		leak_balloon(vb, vb->num_pages);
+
+	/* Now we reset the device so we can clean up the queues. */
+	vdev->config->reset(vdev);
+
+	vdev->config->del_vq(vb->deflate_vq);
+	vdev->config->del_vq(vb->inflate_vq);
+	kfree(vb);
+}
+
+static struct virtio_driver virtio_balloon = {
+	.driver.name =	KBUILD_MODNAME,
+	.driver.owner =	THIS_MODULE,
+	.id_table =	id_table,
+	.probe =	virtballoon_probe,
+	.remove =	__devexit_p(virtballoon_remove),
+	.config_changed = virtballoon_changed,
+};
+
+static int __init init(void)
+{
+	return register_virtio_driver(&virtio_balloon);
+}
+
+static void __exit fini(void)
+{
+	unregister_virtio_driver(&virtio_balloon);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio balloon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
new file mode 100644
index 0000000..26f787d
--- /dev/null
+++ b/drivers/virtio/virtio_pci.c
@@ -0,0 +1,446 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+#include <linux/virtio_pci.h>
+#include <linux/highmem.h>
+#include <linux/spinlock.h>
+
+MODULE_AUTHOR("Anthony Liguori <aliguori@us.ibm.com>");
+MODULE_DESCRIPTION("virtio-pci");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1");
+
+/* Our device structure */
+struct virtio_pci_device
+{
+	struct virtio_device vdev;
+	struct pci_dev *pci_dev;
+
+	/* the IO mapping for the PCI config space */
+	void *ioaddr;
+
+	/* a list of queues so we can dispatch IRQs */
+	spinlock_t lock;
+	struct list_head virtqueues;
+};
+
+struct virtio_pci_vq_info
+{
+	/* the actual virtqueue */
+	struct virtqueue *vq;
+
+	/* the number of entries in the queue */
+	int num;
+
+	/* the index of the queue */
+	int queue_index;
+
+	/* the virtual address of the ring queue */
+	void *queue;
+
+	/* the list node for the virtqueues list */
+	struct list_head node;
+};
+
+/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
+static struct pci_device_id virtio_pci_id_table[] = {
+	{ 0x1af4, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
+
+/* A PCI device has it's own struct device and so does a virtio device so
+ * we create a place for the virtio devices to show up in sysfs.  I think it
+ * would make more sense for virtio to not insist on having it's own device. */
+static struct device virtio_pci_root = {
+	.parent		= NULL,
+	.bus_id		= "virtio-pci",
+};
+
+/* Unique numbering for devices under the kvm root */
+static unsigned int dev_index;
+
+/* Convert a generic virtio device to our structure */
+static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
+{
+	return container_of(vdev, struct virtio_pci_device, vdev);
+}
+
+/* virtio config->feature() implementation */
+static bool vp_feature(struct virtio_device *vdev, unsigned bit)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	u32 mask;
+
+	/* Since this function is supposed to have the side effect of
+	 * enabling a queried feature, we simulate that by doing a read
+	 * from the host feature bitmask and then writing to the guest
+	 * feature bitmask */
+	mask = ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
+	if (mask & (1 << bit)) {
+		mask |= (1 << bit);
+		iowrite32(mask, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
+	}
+
+	return !!(mask & (1 << bit));
+}
+
+/* virtio config->get() implementation */
+static void vp_get(struct virtio_device *vdev, unsigned offset,
+		   void *buf, unsigned len)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	u8 *ptr = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		ptr[i] = ioread8(ioaddr + i);
+}
+
+/* the config->set() implementation.  it's symmetric to the config->get()
+ * implementation */
+static void vp_set(struct virtio_device *vdev, unsigned offset,
+		   const void *buf, unsigned len)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+	const u8 *ptr = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		iowrite8(ptr[i], ioaddr + i);
+}
+
+/* config->{get,set}_status() implementations */
+static u8 vp_get_status(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	return ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+}
+
+static void vp_set_status(struct virtio_device *vdev, u8 status)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	/* We should never be setting status to 0. */
+	BUG_ON(status == 0);
+	return iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+}
+
+static void vp_reset(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	/* 0 status means a reset. */
+	return iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+}
+
+/* the notify function used when creating a virt queue */
+static void vp_notify(struct virtqueue *vq)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
+	struct virtio_pci_vq_info *info = vq->priv;
+
+	/* we write the queue's selector into the notification register to
+	 * signal the other end */
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY);
+}
+
+/* A small wrapper to also acknowledge the interrupt when it's handled.
+ * I really need an EIO hook for the vring so I can ack the interrupt once we
+ * know that we'll be handling the IRQ but before we invoke the callback since
+ * the callback may notify the host which results in the host attempting to
+ * raise an interrupt that we would then mask once we acknowledged the
+ * interrupt. */
+static irqreturn_t vp_interrupt(int irq, void *opaque)
+{
+	struct virtio_pci_device *vp_dev = opaque;
+	struct virtio_pci_vq_info *info;
+	irqreturn_t ret = IRQ_NONE;
+	u8 isr;
+
+	/* reading the ISR has the effect of also clearing it so it's very
+	 * important to save off the value. */
+	isr = ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR);
+
+	/* It's definitely not us if the ISR was not high */
+	if (!isr)
+		return IRQ_NONE;
+
+	/* Configuration change?  Tell driver if it wants to know. */
+	if (isr & VIRTIO_PCI_ISR_CONFIG) {
+		struct virtio_driver *drv;
+		drv = container_of(vp_dev->vdev.dev.driver,
+				   struct virtio_driver, driver);
+
+		if (drv->config_changed)
+			drv->config_changed(&vp_dev->vdev);
+	}
+
+	spin_lock(&vp_dev->lock);
+	list_for_each_entry(info, &vp_dev->virtqueues, node) {
+		if (vring_interrupt(irq, info->vq) == IRQ_HANDLED)
+			ret = IRQ_HANDLED;
+	}
+	spin_unlock(&vp_dev->lock);
+
+	return ret;
+}
+
+/* the config->find_vq() implementation */
+static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
+				    void (*callback)(struct virtqueue *vq))
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	struct virtio_pci_vq_info *info;
+	struct virtqueue *vq;
+	u16 num;
+	int err;
+
+	/* Select the queue we're interested in */
+	iowrite16(index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+
+	/* Check if queue is either not available or already active. */
+	num = ioread16(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NUM);
+	if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN))
+		return ERR_PTR(-ENOENT);
+
+	/* allocate and fill out our structure the represents an active
+	 * queue */
+	info = kmalloc(sizeof(struct virtio_pci_vq_info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	info->queue_index = index;
+	info->num = num;
+
+	info->queue = kzalloc(PAGE_ALIGN(vring_size(num,PAGE_SIZE)), GFP_KERNEL);
+	if (info->queue == NULL) {
+		err = -ENOMEM;
+		goto out_info;
+	}
+
+	/* activate the queue */
+	iowrite32(virt_to_phys(info->queue) >> PAGE_SHIFT,
+		  vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+
+	/* create the vring */
+	vq = vring_new_virtqueue(info->num, vdev, info->queue,
+				 vp_notify, callback);
+	if (!vq) {
+		err = -ENOMEM;
+		goto out_activate_queue;
+	}
+
+	vq->priv = info;
+	info->vq = vq;
+
+	spin_lock(&vp_dev->lock);
+	list_add(&info->node, &vp_dev->virtqueues);
+	spin_unlock(&vp_dev->lock);
+
+	return vq;
+
+out_activate_queue:
+	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+	kfree(info->queue);
+out_info:
+	kfree(info);
+	return ERR_PTR(err);
+}
+
+/* the config->del_vq() implementation */
+static void vp_del_vq(struct virtqueue *vq)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
+	struct virtio_pci_vq_info *info = vq->priv;
+
+	spin_lock(&vp_dev->lock);
+	list_del(&info->node);
+	spin_unlock(&vp_dev->lock);
+
+	vring_del_virtqueue(vq);
+
+	/* Select and deactivate the queue */
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
+
+	kfree(info->queue);
+	kfree(info);
+}
+
+static struct virtio_config_ops virtio_pci_config_ops = {
+	.feature	= vp_feature,
+	.get		= vp_get,
+	.set		= vp_set,
+	.get_status	= vp_get_status,
+	.set_status	= vp_set_status,
+	.reset		= vp_reset,
+	.find_vq	= vp_find_vq,
+	.del_vq		= vp_del_vq,
+};
+
+/* the PCI probing function */
+static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
+				      const struct pci_device_id *id)
+{
+	struct virtio_pci_device *vp_dev;
+	int err;
+
+	/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
+	if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
+		return -ENODEV;
+
+	if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) {
+		printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n",
+		       VIRTIO_PCI_ABI_VERSION, pci_dev->revision);
+		return -ENODEV;
+	}
+
+	/* allocate our structure and fill it out */
+	vp_dev = kzalloc(sizeof(struct virtio_pci_device), GFP_KERNEL);
+	if (vp_dev == NULL)
+		return -ENOMEM;
+
+	snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
+	vp_dev->vdev.index = dev_index;
+	dev_index++;
+
+	vp_dev->vdev.dev.parent = &virtio_pci_root;
+	vp_dev->vdev.config = &virtio_pci_config_ops;
+	vp_dev->pci_dev = pci_dev;
+	INIT_LIST_HEAD(&vp_dev->virtqueues);
+	spin_lock_init(&vp_dev->lock);
+
+	/* enable the device */
+	err = pci_enable_device(pci_dev);
+	if (err)
+		goto out;
+
+	err = pci_request_regions(pci_dev, "virtio-pci");
+	if (err)
+		goto out_enable_device;
+
+	vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
+	if (vp_dev->ioaddr == NULL)
+		goto out_req_regions;
+
+	pci_set_drvdata(pci_dev, vp_dev);
+
+	/* we use the subsystem vendor/device id as the virtio vendor/device
+	 * id.  this allows us to use the same PCI vendor/device id for all
+	 * virtio devices and to identify the particular virtio driver by
+	 * the subsytem ids */
+	vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
+	vp_dev->vdev.id.device = pci_dev->subsystem_device;
+
+	/* register a handler for the queue with the PCI device's interrupt */
+	err = request_irq(vp_dev->pci_dev->irq, vp_interrupt, IRQF_SHARED,
+			  vp_dev->vdev.dev.bus_id, vp_dev);
+	if (err)
+		goto out_set_drvdata;
+
+	/* finally register the virtio device */
+	err = register_virtio_device(&vp_dev->vdev);
+	if (err)
+		goto out_req_irq;
+
+	return 0;
+
+out_req_irq:
+	free_irq(pci_dev->irq, vp_dev);
+out_set_drvdata:
+	pci_set_drvdata(pci_dev, NULL);
+	pci_iounmap(pci_dev, vp_dev->ioaddr);
+out_req_regions:
+	pci_release_regions(pci_dev);
+out_enable_device:
+	pci_disable_device(pci_dev);
+out:
+	kfree(vp_dev);
+	return err;
+}
+
+static void __devexit virtio_pci_remove(struct pci_dev *pci_dev)
+{
+	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
+
+	free_irq(pci_dev->irq, vp_dev);
+	pci_set_drvdata(pci_dev, NULL);
+	pci_iounmap(pci_dev, vp_dev->ioaddr);
+	pci_release_regions(pci_dev);
+	pci_disable_device(pci_dev);
+	kfree(vp_dev);
+}
+
+#ifdef CONFIG_PM
+static int virtio_pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
+{
+	pci_save_state(pci_dev);
+	pci_set_power_state(pci_dev, PCI_D3hot);
+	return 0;
+}
+
+static int virtio_pci_resume(struct pci_dev *pci_dev)
+{
+	pci_restore_state(pci_dev);
+	pci_set_power_state(pci_dev, PCI_D0);
+	return 0;
+}
+#endif
+
+static struct pci_driver virtio_pci_driver = {
+	.name		= "virtio-pci",
+	.id_table	= virtio_pci_id_table,
+	.probe		= virtio_pci_probe,
+	.remove		= virtio_pci_remove,
+#ifdef CONFIG_PM
+	.suspend	= virtio_pci_suspend,
+	.resume		= virtio_pci_resume,
+#endif
+};
+
+static int __init virtio_pci_init(void)
+{
+	int err;
+
+	err = device_register(&virtio_pci_root);
+	if (err)
+		return err;
+
+	err = pci_register_driver(&virtio_pci_driver);
+	if (err)
+		device_unregister(&virtio_pci_root);
+
+	return err;
+}
+
+module_init(virtio_pci_init);
+
+static void __exit virtio_pci_exit(void)
+{
+	device_unregister(&virtio_pci_root);
+	pci_unregister_driver(&virtio_pci_driver);
+}
+
+module_exit(virtio_pci_exit);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1dc04b6..3a28c13 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -87,6 +87,8 @@
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
+		/* We notify *even if* VRING_USED_F_NO_NOTIFY is set here. */
+		vq->notify(&vq->vq);
 		END_USE(vq);
 		return -ENOSPC;
 	}
@@ -97,16 +99,14 @@
 	head = vq->free_head;
 	for (i = vq->free_head; out; i = vq->vring.desc[i].next, out--) {
 		vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
-		vq->vring.desc[i].addr = (page_to_pfn(sg_page(sg))<<PAGE_SHIFT)
-			+ sg->offset;
+		vq->vring.desc[i].addr = sg_phys(sg);
 		vq->vring.desc[i].len = sg->length;
 		prev = i;
 		sg++;
 	}
 	for (; in; i = vq->vring.desc[i].next, in--) {
 		vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
-		vq->vring.desc[i].addr = (page_to_pfn(sg_page(sg))<<PAGE_SHIFT)
-			+ sg->offset;
+		vq->vring.desc[i].addr = sg_phys(sg);
 		vq->vring.desc[i].len = sg->length;
 		prev = i;
 		sg++;
@@ -171,16 +171,6 @@
 	vq->num_free++;
 }
 
-/* FIXME: We need to tell other side about removal, to synchronize. */
-static void vring_shutdown(struct virtqueue *_vq)
-{
-	struct vring_virtqueue *vq = to_vvq(_vq);
-	unsigned int i;
-
-	for (i = 0; i < vq->vring.num; i++)
-		detach_buf(vq, i);
-}
-
 static inline bool more_used(const struct vring_virtqueue *vq)
 {
 	return vq->last_used_idx != vq->vring.used->idx;
@@ -220,7 +210,17 @@
 	return ret;
 }
 
-static bool vring_restart(struct virtqueue *_vq)
+static void vring_disable_cb(struct virtqueue *_vq)
+{
+	struct vring_virtqueue *vq = to_vvq(_vq);
+
+	START_USE(vq);
+	BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
+	vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+	END_USE(vq);
+}
+
+static bool vring_enable_cb(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
@@ -253,26 +253,34 @@
 	if (unlikely(vq->broken))
 		return IRQ_HANDLED;
 
+	/* Other side may have missed us turning off the interrupt,
+	 * but we should preserve disable semantic for virtio users. */
+	if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
+		pr_debug("virtqueue interrupt after disable for %p\n", vq);
+		return IRQ_HANDLED;
+	}
+
 	pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
-	if (vq->vq.callback && !vq->vq.callback(&vq->vq))
-		vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+	if (vq->vq.callback)
+		vq->vq.callback(&vq->vq);
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(vring_interrupt);
 
 static struct virtqueue_ops vring_vq_ops = {
 	.add_buf = vring_add_buf,
 	.get_buf = vring_get_buf,
 	.kick = vring_kick,
-	.restart = vring_restart,
-	.shutdown = vring_shutdown,
+	.disable_cb = vring_disable_cb,
+	.enable_cb = vring_enable_cb,
 };
 
 struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *),
-				      bool (*callback)(struct virtqueue *))
+				      void (*callback)(struct virtqueue *))
 {
 	struct vring_virtqueue *vq;
 	unsigned int i;
@@ -311,9 +319,12 @@
 
 	return &vq->vq;
 }
+EXPORT_SYMBOL_GPL(vring_new_virtqueue);
 
 void vring_del_virtqueue(struct virtqueue *vq)
 {
 	kfree(to_vvq(vq));
 }
+EXPORT_SYMBOL_GPL(vring_del_virtqueue);
 
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index 697104d..589be3e 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -23,7 +23,12 @@
 struct lguest_device_desc {
 	/* The device type: console, network, disk etc.  Type 0 terminates. */
 	__u8 type;
-	/* The number of bytes of the config array. */
+	/* The number of virtqueues (first in config array) */
+	__u8 num_vq;
+	/* The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for guest acknowledgements. */
+	__u8 feature_len;
+	/* The number of bytes of the config array after virtqueues. */
 	__u8 config_len;
 	/* A status byte, written by the Guest. */
 	__u8 status;
@@ -31,7 +36,7 @@
 };
 
 /*D:135 This is how we expect the device configuration field for a virtqueue
- * (type VIRTIO_CONFIG_F_VIRTQUEUE) to be laid out: */
+ * to be laid out in config space. */
 struct lguest_vqconfig {
 	/* The number of entries in the virtio_ring */
 	__u16 num;
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index dfe975a..412672a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1810,5 +1810,6 @@
 		skb->ip_summed = CHECKSUM_NONE;
 }
 
+bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off);
 #endif	/* __KERNEL__ */
 #endif	/* _LINUX_SKBUFF_H */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 14e1379..260d1fc 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -11,15 +11,13 @@
 /**
  * virtqueue - a queue to register buffers for sending or receiving.
  * @callback: the function to call when buffers are consumed (can be NULL).
- *    If this returns false, callbacks are suppressed until vq_ops->restart
- *    is called.
  * @vdev: the virtio device this queue was created for.
  * @vq_ops: the operations for this virtqueue (see below).
  * @priv: a pointer for the virtqueue implementation to use.
  */
 struct virtqueue
 {
-	bool (*callback)(struct virtqueue *vq);
+	void (*callback)(struct virtqueue *vq);
 	struct virtio_device *vdev;
 	struct virtqueue_ops *vq_ops;
 	void *priv;
@@ -41,13 +39,12 @@
  *	vq: the struct virtqueue we're talking about.
  *	len: the length written into the buffer
  *	Returns NULL or the "data" token handed to add_buf.
- * @restart: restart callbacks after callback returned false.
+ * @disable_cb: disable callbacks
+ *	vq: the struct virtqueue we're talking about.
+ * @enable_cb: restart callbacks after disable_cb.
  *	vq: the struct virtqueue we're talking about.
  *	This returns "false" (and doesn't re-enable) if there are pending
  *	buffers in the queue, to avoid a race.
- * @shutdown: "unadd" all buffers.
- *	vq: the struct virtqueue we're talking about.
- *	Remove everything from the queue.
  *
  * Locking rules are straightforward: the driver is responsible for
  * locking.  No two operations may be invoked simultaneously.
@@ -65,9 +62,8 @@
 
 	void *(*get_buf)(struct virtqueue *vq, unsigned int *len);
 
-	bool (*restart)(struct virtqueue *vq);
-
-	void (*shutdown)(struct virtqueue *vq);
+	void (*disable_cb)(struct virtqueue *vq);
+	bool (*enable_cb)(struct virtqueue *vq);
 };
 
 /**
@@ -97,12 +93,15 @@
  * @probe: the function to call when a device is found.  Returns a token for
  *    remove, or PTR_ERR().
  * @remove: the function when a device is removed.
+ * @config_changed: optional function to call when the device configuration
+ *    changes; may be called in interrupt context.
  */
 struct virtio_driver {
 	struct device_driver driver;
 	const struct virtio_device_id *id_table;
 	int (*probe)(struct virtio_device *dev);
 	void (*remove)(struct virtio_device *dev);
+	void (*config_changed)(struct virtio_device *dev);
 };
 
 int register_virtio_driver(struct virtio_driver *drv);
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
new file mode 100644
index 0000000..979524e
--- /dev/null
+++ b/include/linux/virtio_balloon.h
@@ -0,0 +1,18 @@
+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_balloon */
+#define VIRTIO_ID_BALLOON	5
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
+
+struct virtio_balloon_config
+{
+	/* Number of pages host wants Guest to give up. */
+	__le32 num_pages;
+	/* Number of pages we've actually got in balloon. */
+	__le32 actual;
+};
+#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 7bd2bce..bca0b10 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -6,15 +6,19 @@
 #define VIRTIO_ID_BLOCK	2
 
 /* Feature bits */
-#define VIRTIO_CONFIG_BLK_F	0x40
-#define VIRTIO_BLK_F_BARRIER	1	/* Does host support barriers? */
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
+#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 
-/* The capacity (in 512-byte sectors). */
-#define VIRTIO_CONFIG_BLK_F_CAPACITY	0x41
-/* The maximum segment size. */
-#define VIRTIO_CONFIG_BLK_F_SIZE_MAX	0x42
-/* The maximum number of segments. */
-#define VIRTIO_CONFIG_BLK_F_SEG_MAX	0x43
+struct virtio_blk_config
+{
+	/* The capacity (in 512-byte sectors). */
+	__le64 capacity;
+	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+	__le32 size_max;
+	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+	__le32 seg_max;
+} __attribute__((packed));
 
 /* These two define direction. */
 #define VIRTIO_BLK_T_IN		0
@@ -35,8 +39,6 @@
 	__u32 ioprio;
 	/* Sector (ie. 512 byte offset) */
 	__u64 sector;
-	/* Where to put reply. */
-	__u64 id;
 };
 
 #define VIRTIO_BLK_S_OK		0
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index bcc0188..d581b29 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -5,7 +5,7 @@
  * store and access that space differently. */
 #include <linux/types.h>
 
-/* Status byte for guest to report progress, and synchronize config. */
+/* Status byte for guest to report progress, and synchronize features. */
 /* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
 #define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
 /* We have found a driver for the device. */
@@ -15,34 +15,27 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
-/* Feature byte (actually 7 bits availabe): */
-/* Requirements/features of the virtio implementation. */
-#define VIRTIO_CONFIG_F_VIRTIO 1
-/* Requirements/features of the virtqueue (may have more than one). */
-#define VIRTIO_CONFIG_F_VIRTQUEUE 2
-
 #ifdef __KERNEL__
 struct virtio_device;
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
- * @find: search for the next configuration field of the given type.
+ * @feature: search for a feature in this config
  *	vdev: the virtio_device
- *	type: the feature type
- *	len: the (returned) length of the field if found.
- *	Returns a token if found, or NULL.  Never returnes the same field twice
- *	(ie. it's used up).
- * @get: read the value of a configuration field after find().
+ *	bit: the feature bit
+ *	Returns true if the feature is supported.  Acknowledges the feature
+ *	so the host can see it.
+ * @get: read the value of a configuration field
  *	vdev: the virtio_device
- *	token: the token returned from find().
+ *	offset: the offset of the configuration field
  *	buf: the buffer to write the field value into.
- *	len: the length of the buffer (given by find()).
+ *	len: the length of the buffer
  *	Note that contents are conventionally little-endian.
- * @set: write the value of a configuration field after find().
+ * @set: write the value of a configuration field
  *	vdev: the virtio_device
- *	token: the token returned from find().
+ *	offset: the offset of the configuration field
  *	buf: the buffer to read the field value from.
- *	len: the length of the buffer (given by find()).
+ *	len: the length of the buffer
  *	Note that contents are conventionally little-endian.
  * @get_status: read the status byte
  *	vdev: the virtio_device
@@ -50,62 +43,67 @@
  * @set_status: write the status byte
  *	vdev: the virtio_device
  *	status: the new status byte
- * @find_vq: find the first VIRTIO_CONFIG_F_VIRTQUEUE and create a virtqueue.
+ * @reset: reset the device
+ *	vdev: the virtio device
+ *	After this, status and feature negotiation must be done again
+ * @find_vq: find a virtqueue and instantiate it.
  *	vdev: the virtio_device
+ *	index: the 0-based virtqueue number in case there's more than one.
  *	callback: the virqtueue callback
- *	Returns the new virtqueue or ERR_PTR().
+ *	Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
  * @del_vq: free a virtqueue found by find_vq().
  */
 struct virtio_config_ops
 {
-	void *(*find)(struct virtio_device *vdev, u8 type, unsigned *len);
-	void (*get)(struct virtio_device *vdev, void *token,
+	bool (*feature)(struct virtio_device *vdev, unsigned bit);
+	void (*get)(struct virtio_device *vdev, unsigned offset,
 		    void *buf, unsigned len);
-	void (*set)(struct virtio_device *vdev, void *token,
+	void (*set)(struct virtio_device *vdev, unsigned offset,
 		    const void *buf, unsigned len);
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
+	void (*reset)(struct virtio_device *vdev);
 	struct virtqueue *(*find_vq)(struct virtio_device *vdev,
-				     bool (*callback)(struct virtqueue *));
+				     unsigned index,
+				     void (*callback)(struct virtqueue *));
 	void (*del_vq)(struct virtqueue *vq);
 };
 
 /**
- * virtio_config_val - get a single virtio config and mark it used.
- * @config: the virtio config space
- * @type: the type to search for.
+ * virtio_config_val - look for a feature and get a single virtio config.
+ * @vdev: the virtio device
+ * @fbit: the feature bit
+ * @offset: the type to search for.
  * @val: a pointer to the value to fill in.
  *
- * Once used, the config type is marked with VIRTIO_CONFIG_F_USED so it can't
- * be found again.  This version does endian conversion. */
-#define virtio_config_val(vdev, type, v) ({				\
-	int _err = __virtio_config_val((vdev),(type),(v),sizeof(*(v))); \
-									\
-	BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2		\
-		     && sizeof(*(v)) != 4 && sizeof(*(v)) != 8);	\
-	if (!_err) {							\
-		switch (sizeof(*(v))) {					\
-		case 2: le16_to_cpus((__u16 *) v); break;		\
-		case 4: le32_to_cpus((__u32 *) v); break;		\
-		case 8: le64_to_cpus((__u64 *) v); break;		\
-		}							\
-	}								\
+ * The return value is -ENOENT if the feature doesn't exist.  Otherwise
+ * the value is endian-corrected and returned in v. */
+#define virtio_config_val(vdev, fbit, offset, v) ({			\
+	int _err;							\
+	if ((vdev)->config->feature((vdev), (fbit))) {			\
+		__virtio_config_val((vdev), (offset), (v));		\
+		_err = 0;						\
+	} else								\
+		_err = -ENOENT;						\
 	_err;								\
 })
 
-int __virtio_config_val(struct virtio_device *dev,
-			u8 type, void *val, size_t size);
-
 /**
- * virtio_use_bit - helper to use a feature bit in a bitfield value.
- * @dev: the virtio device
- * @token: the token as returned from vdev->config->find().
- * @len: the length of the field.
- * @bitnum: the bit to test.
+ * __virtio_config_val - get a single virtio config without feature check.
+ * @vdev: the virtio device
+ * @offset: the type to search for.
+ * @val: a pointer to the value to fill in.
  *
- * If handed a NULL token, it returns false, otherwise returns bit status.
- * If it's one, it sets the mirroring acknowledgement bit. */
-int virtio_use_bit(struct virtio_device *vdev,
-		   void *token, unsigned int len, unsigned int bitnum);
+ * The value is endian-corrected and returned in v. */
+#define __virtio_config_val(vdev, offset, v) do {			\
+	BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2		\
+		     && sizeof(*(v)) != 4 && sizeof(*(v)) != 8);	\
+	(vdev)->config->get((vdev), (offset), (v), sizeof(*(v)));	\
+	switch (sizeof(*(v))) {						\
+	case 2: le16_to_cpus((__u16 *) v); break;			\
+	case 4: le32_to_cpus((__u32 *) v); break;			\
+	case 8: le64_to_cpus((__u64 *) v); break;			\
+	}								\
+} while(0)
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index ae469ae..1ea3351 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -5,32 +5,32 @@
 /* The ID for virtio_net */
 #define VIRTIO_ID_NET	1
 
-/* The bitmap of config for virtio net */
-#define VIRTIO_CONFIG_NET_F	0x40
-#define VIRTIO_NET_F_NO_CSUM	0
-#define VIRTIO_NET_F_TSO4	1
-#define VIRTIO_NET_F_UFO	2
-#define VIRTIO_NET_F_TSO4_ECN	3
-#define VIRTIO_NET_F_TSO6	4
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM	0	/* Can handle pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO	6	/* Can handle pkts w/ any GSO type */
 
-/* The config defining mac address. */
-#define VIRTIO_CONFIG_NET_MAC_F	0x41
+struct virtio_net_config
+{
+	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
+	__u8 mac[6];
+} __attribute__((packed));
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
 struct virtio_net_hdr
 {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
-      __u8 flags;
+	__u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
 #define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
-/* FIXME: Do we need this?  If they said they can handle ECN, do they care? */
-#define VIRTIO_NET_HDR_GSO_TCPV4_ECN	2	// GSO frame, IPv4 TCP w/ ECN
 #define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
 #define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
-      __u8 gso_type;
-      __u16 gso_size;
-      __u16 csum_start;
-      __u16 csum_offset;
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
+	__u8 gso_type;
+	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
+	__u16 gso_size;		/* Bytes to append to gso_hdr_len per frame */
+	__u16 csum_start;	/* Position to start checksumming from */
+	__u16 csum_offset;	/* Offset after that to place checksum */
 };
 #endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
new file mode 100644
index 0000000..b315165
--- /dev/null
+++ b/include/linux/virtio_pci.h
@@ -0,0 +1,57 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/virtio_config.h>
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES	0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES	4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN		8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM		12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL		14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY		16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS		18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR			19
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG		20
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION		0
+#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 1a4ed49..abe481e 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -15,9 +15,13 @@
 /* This marks a buffer as write-only (otherwise read-only). */
 #define VRING_DESC_F_WRITE	2
 
-/* This means don't notify other side when buffer added. */
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
 #define VRING_USED_F_NO_NOTIFY	1
-/* This means don't interrupt guest when buffer consumed. */
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
 #define VRING_AVAIL_F_NO_INTERRUPT	1
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
@@ -89,7 +93,7 @@
  * };
  */
 static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned int pagesize)
+			      unsigned long pagesize)
 {
 	vr->num = num;
 	vr->desc = p;
@@ -98,7 +102,7 @@
 			    & ~(pagesize - 1));
 }
 
-static inline unsigned vring_size(unsigned int num, unsigned int pagesize)
+static inline unsigned vring_size(unsigned int num, unsigned long pagesize)
 {
 	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
 		 + pagesize - 1) & ~(pagesize - 1))
@@ -114,7 +118,7 @@
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *vq),
-				      bool (*callback)(struct virtqueue *vq));
+				      void (*callback)(struct virtqueue *vq));
 void vring_del_virtqueue(struct virtqueue *vq);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 40b71a2..42eea5fe 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -199,14 +199,12 @@
 	kfree(trans);
 }
 
-static bool p9_virtio_intr(struct virtqueue *q)
+static void p9_virtio_intr(struct virtqueue *q)
 {
 	struct virtio_chan *chan = q->vdev->priv;
 
 	P9_DPRINTK(P9_DEBUG_TRANS, "9p poll_wakeup: %p\n", &chan->wq);
 	wake_up_interruptible(&chan->wq);
-
-	return true;
 }
 
 static int p9_virtio_probe(struct virtio_device *dev)
@@ -236,13 +234,13 @@
 
 	/* Find the input queue. */
 	dev->priv = chan;
-	chan->in_vq = dev->config->find_vq(dev, p9_virtio_intr);
+	chan->in_vq = dev->config->find_vq(dev, 0, p9_virtio_intr);
 	if (IS_ERR(chan->in_vq)) {
 		err = PTR_ERR(chan->in_vq);
 		goto free;
 	}
 
-	chan->out_vq = dev->config->find_vq(dev, NULL);
+	chan->out_vq = dev->config->find_vq(dev, 1, NULL);
 	if (IS_ERR(chan->out_vq)) {
 		err = PTR_ERR(chan->out_vq);
 		goto free_in_vq;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 98420f9..4e35422 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2461,6 +2461,34 @@
 	return elt;
 }
 
+/**
+ * skb_partial_csum_set - set up and verify partial csum values for packet
+ * @skb: the skb to set
+ * @start: the number of bytes after skb->data to start checksumming.
+ * @off: the offset from start to place the checksum.
+ *
+ * For untrusted partially-checksummed packets, we need to make sure the values
+ * for skb->csum_start and skb->csum_offset are valid so we don't oops.
+ *
+ * This function checks and sets those values and skb->ip_summed: if this
+ * returns false you should drop the packet.
+ */
+bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off)
+{
+	if (unlikely(start > skb->len - 2) ||
+	    unlikely((int)start + off > skb->len - 2)) {
+		if (net_ratelimit())
+			printk(KERN_WARNING
+			       "bad partial csum: csum=%u/%u len=%u\n",
+			       start, off, skb->len);
+		return false;
+	}
+	skb->ip_summed = CHECKSUM_PARTIAL;
+	skb->csum_start = skb_headroom(skb) + start;
+	skb->csum_offset = off;
+	return true;
+}
+
 EXPORT_SYMBOL(___pskb_trim);
 EXPORT_SYMBOL(__kfree_skb);
 EXPORT_SYMBOL(kfree_skb);
@@ -2497,3 +2525,4 @@
 
 EXPORT_SYMBOL_GPL(skb_to_sgvec);
 EXPORT_SYMBOL_GPL(skb_cow_data);
+EXPORT_SYMBOL_GPL(skb_partial_csum_set);