Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits) virtio: balloon driver virtio: Use PCI revision field to indicate virtio PCI ABI version virtio: PCI device virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz virtio_blk: Dont waste major numbers virtio_blk: provide getgeo virtio_net: parametrize the napi_weight for virtio receive queue. virtio: free transmit skbs when notified, not on next xmit. virtio: flush buffers on open virtnet: remove double ether_setup virtio: Allow virtio to be modular and used by modules virtio: Use the sg_phys convenience function. virtio: Put the virtio under the virtualization menu virtio: handle interrupts after callbacks turned off virtio: reset function virtio: populate network rings in the probe routine, not open virtio: Tweak virtio_net defines virtio: Net header needs hdr_len virtio: remove unused id field from struct virtio_blk_outhdr virtio: clarify NO_NOTIFY flag usage ...

commit: 93890b71a34f9490673a6edd56b61c2124215e46 [log] [tgz]
author: Linus Torvalds <torvalds@linux-foundation.org> Mon Feb 04 08:00:54 2008 -0800
committer: Linus Torvalds <torvalds@linux-foundation.org> Mon Feb 04 08:00:54 2008 -0800
tree: c5d82620f2cb69f0bf43639e63f54b0c0e2eb744
parent: f5bb3a5e9dcdb8435471562b6cada89525cf4df1 [diff]
parent: 6b35e40767c6c1ac783330109ae8e0c09ea6bc82 [diff]
diff --git a/CREDITS b/CREDITS
index edff310..da0a56e 100644
--- a/CREDITS
+++ b/CREDITS

@@ -508,12 +508,8 @@
 S: Germany
 
 N: Adrian Bunk
-E: bunk@stusta.de
 P: 1024D/4F12B400  B29C E71E FE19 6755 5C8A  84D4 99FC EA98 4F12 B400
 D: misc kernel hacking and testing
-S: Grasmeierstrasse 11
-S: 80805 Muenchen
-S: Germany
 
 N: Ray Burr
 E: ryb@nightmare.com
@@ -1124,6 +1120,9 @@
 S: San Jose, California 95131
 S: USA
 
+N: Adam Fritzler
+E: mid@zigamorph.net
+
 N: Fernando Fuganti
 E: fuganti@conectiva.com.br
 E: fuganti@netbank.com.br

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index c3014df..40ac775 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX

@@ -154,7 +154,7 @@
 	- request_firmware() hotplug interface info.
 floppy.txt
 	- notes and driver options for the floppy disk driver.
-fujitsu/
+frv/
 	- Fujitsu FR-V Linux documentation.
 gpio.txt
 	- overview of GPIO (General Purpose Input/Output) access conventions.
@@ -364,8 +364,6 @@
 	- a description of shared subtrees for namespaces.
 smart-config.txt
 	- description of the Smart Config makefile feature.
-smp.txt
-	- a few notes on symmetric multi-processing.
 sony-laptop.txt
 	- Sony Notebook Control Driver (SNC) Readme.
 sonypi.txt

diff --git a/Documentation/BUG-HUNTING b/Documentation/BUG-HUNTING
index 35f5bd2..6c81675 100644
--- a/Documentation/BUG-HUNTING
+++ b/Documentation/BUG-HUNTING

@@ -53,7 +53,7 @@
 
 [Sat Mar  2 10:32:33 PST 1996 KERNEL_BUG-HOWTO lm@sgi.com (Larry McVoy)]
 
-This is how to track down a bug if you know nothing about kernel hacking.  
+This is how to track down a bug if you know nothing about kernel hacking.
 It's a brute force approach but it works pretty well.
 
 You need:
@@ -66,12 +66,12 @@
 
         . Rebuild a revision that you believe works, install, and verify that.
         . Do a binary search over the kernels to figure out which one
-          introduced the bug.  I.e., suppose 1.3.28 didn't have the bug, but 
+          introduced the bug.  I.e., suppose 1.3.28 didn't have the bug, but
           you know that 1.3.69 does.  Pick a kernel in the middle and build
           that, like 1.3.50.  Build & test; if it works, pick the mid point
           between .50 and .69, else the mid point between .28 and .50.
         . You'll narrow it down to the kernel that introduced the bug.  You
-          can probably do better than this but it gets tricky.  
+          can probably do better than this but it gets tricky.
 
         . Narrow it down to a subdirectory
 
@@ -81,27 +81,27 @@
             directories:
 
                 Copy the non-working directory next to the working directory
-                as "dir.63".  
+                as "dir.63".
                 One directory at time, try moving the working directory to
-                "dir.62" and mv dir.63 dir"time, try 
+                "dir.62" and mv dir.63 dir"time, try
 
                         mv dir dir.62
                         mv dir.63 dir
                         find dir -name '*.[oa]' -print | xargs rm -f
 
                 And then rebuild and retest.  Assuming that all related
-                changes were contained in the sub directory, this should 
-                isolate the change to a directory.  
+                changes were contained in the sub directory, this should
+                isolate the change to a directory.
 
                 Problems: changes in header files may have occurred; I've
-                found in my case that they were self explanatory - you may 
+                found in my case that they were self explanatory - you may
                 or may not want to give up when that happens.
 
         . Narrow it down to a file
 
           - You can apply the same technique to each file in the directory,
-            hoping that the changes in that file are self contained.  
-            
+            hoping that the changes in that file are self contained.
+
         . Narrow it down to a routine
 
           - You can take the old file and the new file and manually create
@@ -130,7 +130,7 @@
             that makes the difference.
 
 Finally, you take all the info that you have, kernel revisions, bug
-description, the extent to which you have narrowed it down, and pass 
+description, the extent to which you have narrowed it down, and pass
 that off to whomever you believe is the maintainer of that section.
 A post to linux.dev.kernel isn't such a bad idea if you've done some
 work to narrow it down.

diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 681e2b3..08a1ed1 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches

@@ -220,20 +220,8 @@
 Exception:  If your mailer is mangling patches then someone may ask
 you to re-send them using MIME.
 
-
-WARNING: Some mailers like Mozilla send your messages with
----- message header ----
-Content-Type: text/plain; charset=us-ascii; format=flowed
----- message header ----
-The problem is that "format=flowed" makes some of the mailers
-on receiving side to replace TABs with spaces and do similar
-changes. Thus the patches from you can look corrupted.
-
-To fix this just make your mozilla defaults/pref/mailnews.js file to look like:
-pref("mailnews.send_plaintext_flowed", false); // RFC 2646=======
-pref("mailnews.display.disable_format_flowed_support", true);
-
-
+See Documentation/email-clients.txt for hints about configuring
+your e-mail client so that it sends your patches untouched.
 
 8) E-mail size.
 

diff --git a/Documentation/arm/Sharp-LH/IOBarrier b/Documentation/arm/Sharp-LH/IOBarrier
index c0d8853..2e953e2 100644
--- a/Documentation/arm/Sharp-LH/IOBarrier
+++ b/Documentation/arm/Sharp-LH/IOBarrier

@@ -32,7 +32,7 @@
 only needs occurs after the SMC IO write cycle.  The routines that
 implement this work-around make an additional concession which is to
 disable interrupts during the IO sequence.  Other hardware devices
-(the LogicPD CPLD) have registers in the same the physical memory
+(the LogicPD CPLD) have registers in the same physical memory
 region as the SMC chip.  An interrupt might allow an access to one of
 those registers while SMC IO is being performed.
 

diff --git a/Documentation/debugging-modules.txt b/Documentation/debugging-modules.txt
index 24029f6..172ad4a 100644
--- a/Documentation/debugging-modules.txt
+++ b/Documentation/debugging-modules.txt

@@ -16,3 +16,7 @@
 echo 'exec /sbin/modprobe "$@"' >> /tmp/modprobe
 chmod a+x /tmp/modprobe
 echo /tmp/modprobe > /proc/sys/kernel/modprobe
+
+Note that the above applies only when the *kernel* is requesting
+that the module be loaded -- it won't have any effect if that module
+is being loaded explicitly using "modprobe" from userspace.

diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 2a97320..83009fd 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt

@@ -122,15 +122,15 @@
 using these calls except with such hotplug-deficient drivers.
 
 	struct platform_device *platform_device_alloc(
-			char *name, unsigned id);
+			const char *name, int id);
 
 You can use platform_device_alloc() to dynamically allocate a device, which
 you will then initialize with resources and platform_device_register().
 A better solution is usually:
 
 	struct platform_device *platform_device_register_simple(
-			char *name, unsigned id,
-			struct resource *res, unsigned nres);
+			const char *name, int id,
+			struct resource *res, unsigned int nres);
 
 You can use platform_device_register_simple() as a one-step call to allocate
 and register a device.

diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index d1b9825..44c97e6 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt

@@ -377,7 +377,7 @@
 Rather than have a group where some items behave differently than
 others, configfs provides a method whereby one or many subgroups are
 automatically created inside the parent at its creation.  Thus,
-mkdir("parent) results in "parent", "parent/subgroup1", up through
+mkdir("parent") results in "parent", "parent/subgroup1", up through
 "parent/subgroupN".  Items of type 1 can now be created in
 "parent/subgroup1", and items of type N can be created in
 "parent/subgroupN".

diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index dac45c9..0f33c77 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting

@@ -1,6 +1,6 @@
 Changes since 2.5.0:
 
---- 
+---
 [recommended]
 
 New helpers: sb_bread(), sb_getblk(), sb_find_get_block(), set_bh(),
@@ -10,7 +10,7 @@
 
 (sb_find_get_block() replaces 2.4's get_hash_table())
 
---- 
+---
 [recommended]
 
 New methods: ->alloc_inode() and ->destroy_inode().
@@ -28,7 +28,7 @@
 
 Use FOO_I(inode) instead of &inode->u.foo_inode_i;
 
-Add foo_alloc_inode() and foo_destory_inode() - the former should allocate
+Add foo_alloc_inode() and foo_destroy_inode() - the former should allocate
 foo_inode_info and return the address of ->vfs_inode, the latter should free
 FOO_I(inode) (see in-tree filesystems for examples).
 

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 194c8f3..0b1b0c0 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt

@@ -216,6 +216,7 @@
   priority      priority level
   nice          nice level
   num_threads   number of threads
+  it_real_value	(obsolete, always 0)
   start_time    time the process started after system boot
   vsize         virtual memory size
   rss           resident set memory size

diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 339c6a4..7be232b 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -118,7 +118,7 @@
     with the new root (cd /newmount; mount --move . /; chroot .), attach
     stdin/stdout/stderr to the new /dev/console, and exec the new init.
 
-    Since this is a remarkably persnickity process (and involves deleting
+    Since this is a remarkably persnickety process (and involves deleting
     commands before you can run them), the klibc package introduced a helper
     program (utils/run_init.c) to do all this for you.  Most other packages
     (such as busybox) have named this command "switch_root".

diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt
index 18d23f9..094f2d2 100644
--- a/Documentation/filesystems/relay.txt
+++ b/Documentation/filesystems/relay.txt

@@ -140,7 +140,7 @@
 In order for a user application to make use of relay files, the
 host filesystem must be mounted.  For example,
 
-	mount -t debugfs debugfs /debug
+	mount -t debugfs debugfs /sys/kernel/debug
 
 NOTE:   the host filesystem doesn't need to be mounted for kernel
 	clients to create or use channels - it only needs to be

diff --git a/Documentation/fujitsu/frv/README.txt b/Documentation/frv/README.txt
similarity index 100%
rename from Documentation/fujitsu/frv/README.txt
rename to Documentation/frv/README.txt


diff --git a/Documentation/fujitsu/frv/atomic-ops.txt b/Documentation/frv/atomic-ops.txt
similarity index 100%
rename from Documentation/fujitsu/frv/atomic-ops.txt
rename to Documentation/frv/atomic-ops.txt


diff --git a/Documentation/fujitsu/frv/booting.txt b/Documentation/frv/booting.txt
similarity index 98%
rename from Documentation/fujitsu/frv/booting.txt
rename to Documentation/frv/booting.txt
index 4e22905..ace200b 100644
--- a/Documentation/fujitsu/frv/booting.txt
+++ b/Documentation/frv/booting.txt

@@ -177,5 +177,5 @@
   (*) vdc=...
 
       This option configures the MB93493 companion chip visual display
-      driver. Please see Documentation/fujitsu/mb93493/vdc.txt for more
+      driver. Please see Documentation/frv/mb93493/vdc.txt for more
       information.

diff --git a/Documentation/fujitsu/frv/clock.txt b/Documentation/frv/clock.txt
similarity index 100%
rename from Documentation/fujitsu/frv/clock.txt
rename to Documentation/frv/clock.txt


diff --git a/Documentation/fujitsu/frv/configuring.txt b/Documentation/frv/configuring.txt
similarity index 100%
rename from Documentation/fujitsu/frv/configuring.txt
rename to Documentation/frv/configuring.txt


diff --git a/Documentation/fujitsu/frv/features.txt b/Documentation/frv/features.txt
similarity index 100%
rename from Documentation/fujitsu/frv/features.txt
rename to Documentation/frv/features.txt


diff --git a/Documentation/fujitsu/frv/gdbinit b/Documentation/frv/gdbinit
similarity index 100%
rename from Documentation/fujitsu/frv/gdbinit
rename to Documentation/frv/gdbinit


diff --git a/Documentation/fujitsu/frv/gdbstub.txt b/Documentation/frv/gdbstub.txt
similarity index 100%
rename from Documentation/fujitsu/frv/gdbstub.txt
rename to Documentation/frv/gdbstub.txt


diff --git a/Documentation/fujitsu/frv/kernel-ABI.txt b/Documentation/frv/kernel-ABI.txt
similarity index 100%
rename from Documentation/fujitsu/frv/kernel-ABI.txt
rename to Documentation/frv/kernel-ABI.txt


diff --git a/Documentation/fujitsu/frv/mmu-layout.txt b/Documentation/frv/mmu-layout.txt
similarity index 100%
rename from Documentation/fujitsu/frv/mmu-layout.txt
rename to Documentation/frv/mmu-layout.txt


diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt
index 74f68b3..1ba84f3 100644
--- a/Documentation/initrd.txt
+++ b/Documentation/initrd.txt

@@ -85,7 +85,7 @@
 disk with the desired initrd content, cd to that directory, and run (as an
 example):
 
-find . | cpio --quiet -c -o | gzip -9 -n > /boot/imagefile.img
+find . | cpio --quiet -H newc -o | gzip -9 -n > /boot/imagefile.img
 
 Examining the contents of an existing image file is just as simple:
 

diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt
new file mode 100644
index 0000000..17d8751
--- /dev/null
+++ b/Documentation/ja_JP/stable_kernel_rules.txt

@@ -0,0 +1,79 @@
+NOTE:
+This is Japanese translated version of "Documentation/stable_kernel_rules.txt".
+This one is maintained by Tsugikazu Shibata <tshibata@ab.jp.nec.com>
+and JF Project team <www.linux.or.jp/JF>.
+If you find difference with original file or problem in translation,
+please contact maintainer of this file or JF project.
+
+Please also note that purpose of this file is easier to read for non
+English natives and do no intended to fork. So, if you have any
+comment or update of this file, please try to update Original(English)
+file at first.
+
+==================================
+ããã¯ã
+linux-2.6.24/Documentation/stable_kernel_rules.txt
+ã®åè¨³ã§ãã
+
+ç¿»è¨³å£ä½ï¼ JF ããã¸ã§ã¯ã < http://www.linux.or.jp/JF/ >
+ç¿»è¨³æ¥ï¼ 2007/12/30
+ç¿»è¨³èï¼ Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
+æ ¡æ£èï¼ æ¦äºä¼¸åããã<takei at webmasters dot gr dot jp>
+         ããããã (Seiji Kaneko) <skaneko at a2 dot mbn dot or dot jp>
+         å°æ éå¸ãã (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
+         éå£ãã (Kenji Noguchi) <tokyo246 at gmail dot com>
+         ç¥å®®ä¿¡å¤ªéãã <jin at libjingu dot jp>
+==================================
+
+ãã£ã¨ç¥ãããã£ã Linux 2.6 -stable ãªãªã¼ã¹ã®å¨ã¦
+
+"-stable" ããªã¼ã«ã©ã®ãããªç¨®é¡ã®ããããåãå¥ããããããã©ã®ãããª
+ãã®ãåãå¥ããããªãããã«ã¤ãã¦ã®è¦å-
+
+ - æããã«æ£ããããã¹ãããã¦ãããã®ã§ãªããã°ãªããªãã
+ - æè(å¤æ´è¡ã®åå¾)ãå«ãã¦ 100 è¡ããå¤§ããã¦ã¯ãããªãã
+ - ãã ä¸åã®ãã¨ã ããä¿®æ£ãã¦ããã¹ãã
+ - çãæ©ã¾ãã¦ããæ¬ç©ã®ãã°ãä¿®æ£ããªããã°ãªããªãã("ããã¯ãã°ã§
+   ãããããããªãã..." ã®ãããªãã®ã§ã¯ãªã)
+ - ãã«ãã¨ã©ã¼(CONFIG_BROKENã«ãªã£ã¦ãããã®ãé¤ã), oops, ãã³ã°ããã¼
+   ã¿ç ´å£ãç¾å®ã®ã»ãã¥ãªãã£åé¡ããã®ä» "ãããããã¯ãã¡ã ã"ã¨ãã
+   ãããªãã®ãä¿®æ£ããªããã°ãªããªããçãè¨ãã°ãéå¤§ãªåé¡ã
+ - ã©ã®ããã«ç«¶åç¶æãçºçãããã®èª¬æãä¸ç·ã«æ¸ããã¦ããªãéãã
+   "çè«çã«ã¯ç«¶åç¶æã«ãªã"ãããªãã®ã¯ä¸å¯ã
+ - ãããªãäºç´°ãªä¿®æ£ãå«ãããã¨ã¯ã§ããªãã(ã¹ãã«ã®ä¿®æ£ãç©ºç½ã®ã¯ãªã¼
+   ã³ã¢ãããªã©)
+ - å¯¾å¿ãããµãã·ã¹ãã ã¡ã³ãããåãå¥ãããã®ã§ãªããã°ãªããªãã
+ - Documentation/SubmittingPatches ã®è¦åã«å¾ã£ããã®ã§ãªããã°ãªããªãã
+
+-stable ããªã¼ã«ããããéä»ããæç¶ã-
+
+ - ä¸è¨ã®è¦åã«å¾ã£ã¦ããããç¢ºèªããå¾ã«ãstable@kernel.org ã«ããã
+   ãéãã
+ - éä¿¡èã¯ãããããã¥ã¼ã«åãä»ããããéã«ã¯ ACK ããå´ä¸ãããå ´å
+   ã«ã¯ NAK ãåãåãããã®åå¿ã¯éçºèãã¡ã®ã¹ã±ã¸ã¥ã¼ã«ã«ãã£ã¦ãæ°
+   æ¥ãããå ´åãããã
+ - ããåãåããããããããã¯ä»ã®éçºèãã¡ã®ã¬ãã¥ã¼ã®ããã«
+   -stable ãã¥ã¼ã«è¿½å ãããã
+ - ã»ãã¥ãªãã£ãããã¯ãã®ã¨ã¤ãªã¢ã¹ (stable@kernel.org) ã«éãããã¹
+   ãã§ã¯ãªããä»£ããã« security@kernel.org ã®ã¢ãã¬ã¹ã«éãããã
+
+ã¬ãã¥ã¼ãµã¤ã¯ã«-
+
+ - -stable ã¡ã³ãããã¬ãã¥ã¼ãµã¤ã¯ã«ãæ±ºããã¨ãããããã¯ã¬ãã¥ã¼å§
+   å¡ä¼ã¨ããããå½±é¿ããé åã®ã¡ã³ãã(æä¾èããã®é åã®ã¡ã³ããã§ç¡
+   ãéã)ã«éãããlinux-kernel ã¡ã¼ãªã³ã°ãªã¹ãã«CCãããã
+ - ã¬ãã¥ã¼å§å¡ä¼ã¯ 48æéã®éã« ACK ã NAK ãåºãã
+ - ããããããå§å¡ä¼ã®ã¡ã³ãããå´ä¸ããããã¡ã³ããéãã¡ã³ããæ°ä»
+   ããªãã£ãåé¡ãæã¡ããããlinux-kernel ã¡ã³ãããããã«ç°è°ãå±ã
+   ãå ´åã«ã¯ããããã¯ãã¥ã¼ããåé¤ãããã
+ - ã¬ãã¥ã¼ãµã¤ã¯ã«ã®æå¾ã«ãACK ãåãããããã¯ææ°ã® -stable ãªãªã¼
+   ã¹ã«è¿½å ããããã®å¾ã«æ°ãã -stable ãªãªã¼ã¹ãè¡ãããã
+ - ã»ãã¥ãªãã£ãããã¯ãéå¸¸ã®ã¬ãã¥ã¼ãµã¤ã¯ã«ãéãããã»ãã¥ãªãã£
+   ã«ã¼ãã«ãã¼ã ããç´æ¥ -stable ããªã¼ã«åãä»ããããã
+   ãã®æç¶ãã®è©³ç´°ã«ã¤ãã¦ã¯ kernel security ãã¼ã ã«åãåããããã¨ã
+
+ã¬ãã¥ã¼å§å¡ä¼-
+
+ - ãã®å§å¡ä¼ã¯ããã®ã¿ã¹ã¯ã«ã¤ãã¦æ´»åããå¤ãã®ãã©ã³ãã£ã¢ã¨ãå°æ°ã®
+   éãã©ã³ãã£ã¢ã®ã«ã¼ãã«éçºèéã§æ§æããã¦ããã
+

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cf38689..9ad4e6f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt

@@ -549,7 +549,7 @@
 			1 will print _a lot_ more information - normally
 			only useful to kernel developers.
 
-	decnet=		[HW,NET]
+	decnet.addr=	[HW,NET]
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
@@ -1561,14 +1561,17 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/ramdisk.txt.
 
-	rcu.blimit=	[KNL,BOOT] Set maximum number of finished
-			RCU callbacks to process in one batch.
+	rcupdate.blimit=	[KNL,BOOT]
+			Set maximum number of finished RCU callbacks to process
+			in one batch.
 
-	rcu.qhimark=	[KNL,BOOT] Set threshold of queued
+	rcupdate.qhimark=	[KNL,BOOT]
+			Set threshold of queued
 			RCU callbacks over which batch limiting is disabled.
 
-	rcu.qlowmark=	[KNL,BOOT] Set threshold of queued
-			RCU callbacks below which batch limiting is re-enabled.
+	rcupdate.qlowmark=	[KNL,BOOT]
+			Set threshold of queued RCU callbacks below which
+			batch limiting is re-enabled.
 
 	rdinit=		[KNL]
 			Format: <full_path>
@@ -1888,9 +1891,6 @@
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
-	st0x=		[HW,SCSI]
-			See header of drivers/scsi/seagate.c.
-
 	sti=		[PARISC,HW]
 			Format: <num>
 			Set the STI (builtin display/keyboard on the HP-PARISC
@@ -1975,9 +1975,6 @@
 	tipar.delay=	[HW,PPT]
 			Set inter-bit delay in microseconds (default 10).
 
-	tmc8xx=		[HW,SCSI]
-			See header of drivers/scsi/seagate.c.
-
 	tmscsim=	[HW,SCSI]
 			See comment before function dc390_setup() in
 			drivers/scsi/tmscsim.c.

diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index badb748..d896895 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt

@@ -60,7 +60,7 @@
 
 The kernel command line takes options looking like the following:
 
-    decnet=1,2
+    decnet.addr=1,2
 
 the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
 and early 2.3.xx kernels, you must use a comma when specifying the

diff --git a/Documentation/smp.txt b/Documentation/smp.txt
deleted file mode 100644
index 82fc50b..0000000
--- a/Documentation/smp.txt
+++ /dev/null

@@ -1,22 +0,0 @@
-To set up SMP
-
-Configure the kernel and answer Y to CONFIG_SMP.
-
-If you are using LILO, it is handy to have both SMP and non-SMP
-kernel images on hand. Edit /etc/lilo.conf to create an entry
-for another kernel image called "linux-smp" or something.
-
-The next time you compile the kernel, when running a SMP kernel,
-edit linux/Makefile and change "MAKE=make" to "MAKE=make -jN"
-(where N = number of CPU + 1, or if you have tons of memory/swap
- you can just use "-j" without a number). Feel free to experiment
-with this one.
-
-Of course you should time how long each build takes :-)
-Example:
-   make config
-   time -v sh -c 'make clean install modules modules_install'
-
-If you are using some Compaq MP compliant machines you will need to set
-the operating system in the BIOS settings to "Unixware" - don't ask me
-why Compaqs don't work otherwise.

diff --git a/MAINTAINERS b/MAINTAINERS
index 58b1603..da30a72 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -84,13 +84,6 @@
 			it has been replaced by a better system and you
 			should be using that.
 
-3C359 NETWORK DRIVER
-P:	Mike Phillips
-M:	mikep@linuxtr.net
-L:	netdev@vger.kernel.org
-W:	http://www.linuxtr.net
-S:	Maintained
-
 3C505 NETWORK DRIVER
 P:	Philip Blundell
 M:	philb@gnu.org
@@ -939,8 +932,6 @@
 S:	Maintained
 
 BONDING DRIVER
-P:	Chad Tindel
-M:	ctindel@users.sourceforge.net
 P:	Jay Vosburgh
 M:	fubar@us.ibm.com
 L:	bonding-devel@lists.sourceforge.net
@@ -2864,15 +2855,6 @@
 W:	http://oss.oracle.com/projects/ocfs2/
 S:	Supported
 
-OLYMPIC NETWORK DRIVER
-P:	Peter De Shrijver
-M:	p2@ace.ulyssis.student.kuleuven.ac.be
-P:	Mike Phillips
-M:	mikep@linuxtr.net
-L:	netdev@vger.kernel.org
-W:	http://www.linuxtr.net
-S:	Maintained
-
 OMNIKEY CARDMAN 4000 DRIVER
 P:	Harald Welte
 M:	laforge@gnumonks.org
@@ -3195,7 +3177,7 @@
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
 P:	Corey Thomas
-M:	corey@world.std.com
+M:	coreythomas@charter.net
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 
@@ -3788,13 +3770,6 @@
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
 
-TOKEN-RING NETWORK DRIVER
-P:	Mike Phillips
-M:	mikep@linuxtr.net
-L:	netdev@vger.kernel.org
-W:	http://www.linuxtr.net
-S:	Maintained
-
 TOSHIBA ACPI EXTRAS DRIVER
 P:	John Belmonte
 M:	toshiba_acpi@memebeam.org
@@ -3815,18 +3790,9 @@
 S:	Maintained
 
 TRIVIAL PATCHES
-P:	Adrian Bunk
+P:	Jesper Juhl
 M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/
-T:	git kernel.org:/pub/scm/linux/kernel/git/bunk/trivial.git
-S:	Maintained
-
-TMS380 TOKEN-RING NETWORK DRIVER
-P:	Adam Fritzler
-M:	mid@auk.cx
-L:	linux-tr@linuxtr.net
-W:	http://www.auk.cx/tms380tr/
 S:	Maintained
 
 TULIP NETWORK DRIVER

diff --git a/Makefile b/Makefile
index 0f84c74..89f2d8b 100644
--- a/Makefile
+++ b/Makefile

@@ -1484,7 +1484,7 @@
 # Single targets
 # ---------------------------------------------------------------------------
 # Single targets are compatible with:
-# - build whith mixed source and output
+# - build with mixed source and output
 # - build with separate output dir 'make O=...'
 # - external modules
 #

diff --git a/arch/Kconfig b/arch/Kconfig
new file mode 100644
index 0000000..3d72dc3
--- /dev/null
+++ b/arch/Kconfig

@@ -0,0 +1,31 @@
+#
+# General architecture dependent options
+#
+
+config OPROFILE
+	tristate "OProfile system profiling (EXPERIMENTAL)"
+	depends on PROFILING
+	depends on HAVE_OPROFILE
+	help
+	  OProfile is a profiling system capable of profiling the
+	  whole system, include the kernel, kernel modules, libraries,
+	  and applications.
+
+	  If unsure, say N.
+
+config HAVE_OPROFILE
+	def_bool n
+
+config KPROBES
+	bool "Kprobes"
+	depends on KALLSYMS && MODULES
+	depends on HAVE_KPROBES
+	help
+	  Kprobes allows you to trap at almost any kernel address and
+	  execute a callback function.  register_kprobe() establishes
+	  a probepoint and specifies the callback.  Kprobes is useful
+	  for kernel debugging, non-intrusive instrumentation and testing.
+	  If in doubt, say "N".
+
+config HAVE_KPROBES
+	def_bool n

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index c613d5f..01b10ab 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig

@@ -5,6 +5,7 @@
 config ALPHA
 	bool
 	default y
+	select HAVE_OPROFILE
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -531,8 +532,8 @@
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also the <file:Documentation/smp.txt>, and the SMP-HOWTO
-	  available at <http://www.tldp.org/docs.html#howto>.
+	  See also the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -649,8 +650,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/alpha/Kconfig.debug"
 
 # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4b1a8e3..4716370 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig

@@ -10,6 +10,8 @@
 	default y
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
+	select HAVE_OPROFILE
+	select HAVE_KPROBES if (!XIP_KERNEL)
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -135,6 +137,23 @@
 config ARCH_MTD_XIP
 	bool
 
+if OPROFILE
+
+config OPROFILE_ARMV6
+	def_bool y
+	depends on CPU_V6 && !SMP
+	select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+	def_bool y
+	depends on CPU_V6 && SMP
+	select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+	bool
+
+endif
+
 config VECTORS_BASE
 	hex
 	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
@@ -616,8 +635,7 @@
 	  processor machines. On a single processor machine, the kernel will
 	  run faster if you say N here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/i386/IO-APIC.txt>,
+	  See also <file:Documentation/i386/IO-APIC.txt>,
 	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
 	  <http://www.linuxdoc.org/docs.html#howto>.
 
@@ -1128,8 +1146,6 @@
 
 source "fs/Kconfig"
 
-source "arch/arm/Kconfig.instrumentation"
-
 source "arch/arm/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/arm/Kconfig.instrumentation b/arch/arm/Kconfig.instrumentation
deleted file mode 100644
index 453ad8e..0000000
--- a/arch/arm/Kconfig.instrumentation
+++ /dev/null

@@ -1,62 +0,0 @@
-menuconfig INSTRUMENTATION
-	bool "Instrumentation Support"
-	default y
-	---help---
-	  Say Y here to get to see options related to performance measurement,
-	  system-wide debugging, and testing. This option alone does not add any
-	  kernel code.
-
-	  If you say N, all options in this submenu will be skipped and
-	  disabled. If you're trying to debug the kernel itself, go see the
-	  Kernel Hacking menu.
-
-if INSTRUMENTATION
-
-config PROFILING
-	bool "Profiling support (EXPERIMENTAL)"
-	help
-	  Say Y here to enable the extended profiling support mechanisms used
-	  by profilers such as OProfile.
-
-config OPROFILE
-	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING && !UML
-	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
-
-	  If unsure, say N.
-
-config OPROFILE_ARMV6
-	bool
-	depends on OPROFILE && CPU_V6 && !SMP
-	default y
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_MPCORE
-	bool
-	depends on OPROFILE && CPU_V6 && SMP
-	default y
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_ARM11_CORE
-	bool
-
-config KPROBES
-	bool "Kprobes"
-	depends on KALLSYMS && MODULES && !UML && !XIP_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
-config MARKERS
-	bool "Activate markers"
-	help
-	  Place an empty function call at each marker site. Can be
-	  dynamically changed for a probe function.
-
-endif # INSTRUMENTATION

diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index efba65e..3170622 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c

@@ -32,7 +32,7 @@
 /*
  * There are three devices connected to the SSP interface:
  *   1. A touchscreen controller (TI ADS7846 compatible)
- *   2. An LCD contoller (with some Backlight functionality)
+ *   2. An LCD controller (with some Backlight functionality)
  *   3. A battery monitoring IC (Maxim MAX1111)
  *
  * Each device uses a different speed/mode of communication.

diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 1e25b1d..94620be 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c

@@ -165,7 +165,7 @@
 
 	ucb1x00_adc_enable(ucb);
 	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	/* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */
+	/* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
 	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
 	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
 	ucb1x00_adc_disable(ucb);

diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d486f51..ae2c5d7 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c

@@ -47,7 +47,7 @@
  *		  Mark IRQ_LCD valid
  *
  *   25-Jul-2005  Ben Dooks
- *		  Split the S3C2440 IRQ code to seperate file
+ *		  Split the S3C2440 IRQ code to separate file
 */
 
 #include <linux/init.h>

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index e34e2c9..c816f29 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig

@@ -10,6 +10,8 @@
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 	help
 	  AVR32 is a high-performance 32-bit RISC microprocessor core,
 	  designed for cost-sensitive embedded applications, with particular
@@ -54,9 +56,6 @@
 config ARCH_HAS_ILOG2_U64
 	def_bool n
 
-config ARCH_SUPPORTS_OPROFILE
-	def_bool y
-
 config GENERIC_HWEIGHT
 	def_bool y
 
@@ -236,8 +235,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/avr32/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 4802eb7..ba21e33 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig

@@ -24,6 +24,7 @@
 config BLACKFIN
 	bool
 	default y
+	select HAVE_OPROFILE
 
 config ZONE_DMA
 	bool
@@ -973,8 +974,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/blackfin/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 222da15..7f0be4c 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig

@@ -213,8 +213,6 @@
 
 source "drivers/usb/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/cris/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index e3f965c..bf0468c 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig

@@ -79,7 +79,7 @@
 	  Setting this option causes the FR-V atomic operations to be mostly
 	  implemented out-of-line.
 
-	  See Documentation/fujitsu/frv/atomic-ops.txt for more information.
+	  See Documentation/frv/atomic-ops.txt for more information.
 
 config HIGHMEM
 	bool "High memory support"
@@ -375,8 +375,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/frv/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index f926c70..99046b1 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S

@@ -253,7 +253,7 @@
 	andi.p		gr5,#~PSR_ET,gr5
 
 	# set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel
-	# - for an explanation of how it works, see: Documentation/fujitsu/frv/atomic-ops.txt
+	# - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt
 	andi		gr25,#~0xc0,gr25
 
 	sti		gr20,@(gr28,#REG_TBR)
@@ -445,7 +445,7 @@
 	sti		gr22,@(sp,#REG_SP)
 
 	# set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel
-	# - for an explanation of how it works, see: Documentation/fujitsu/frv/atomic-ops.txt
+	# - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt
 	movsg		cccr,gr20
 	andi		gr20,#~0xc0,gr20
 	movgs		gr20,cccr

diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index 545cd32..ee0ac90 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S

@@ -1,7 +1,7 @@
 /* atomic-ops.S: kernel atomic operations
  *
  * For an explanation of how atomic ops work in this arch, see:
- *   Documentation/fujitsu/frv/atomic-ops.txt
+ *   Documentation/frv/atomic-ops.txt
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)

diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index ff6a871..dc61222 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig

@@ -223,8 +223,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/h8300/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c
index 551fd5f..ac10b97 100644
--- a/arch/h8300/platform/h8s/ints.c
+++ b/arch/h8300/platform/h8s/ints.c

@@ -121,7 +121,7 @@
 		printk("virtual vector at 0x%08lx\n",(unsigned long)ramvec);
 
 #if defined(CONFIG_GDB_DEBUG)
-	/* save orignal break vector */
+	/* save original break vector */
 	break_vec = ramvec[TRAP3_VEC];
 #else
 	break_vec = VECTOR(trace_break);

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index c9307c9..b0de113 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig

@@ -15,6 +15,8 @@
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)
 	select ARCH_SUPPORTS_MSI
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -283,8 +285,8 @@
 	  single processor systems.  On a single processor system, the kernel
 	  will run faster if you say N here.
 
-	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-	  available at <http://www.tldp.org/docs.html#howto>.
+	  See also the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -600,8 +602,6 @@
 
 source "arch/ia64/hp/sim/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/ia64/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 49326e9..795180b 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig

@@ -8,6 +8,7 @@
 config M32R
 	bool
 	default y
+	select HAVE_OPROFILE
 
 config SBUS
 	bool
@@ -302,8 +303,7 @@
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  and the SMP-HOWTO available at
+	  See also the SMP-HOWTO available at
 	  <http://www.linuxdoc.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
@@ -426,8 +426,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/m32r/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index ed4d075..9aa615d 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c

@@ -476,7 +476,7 @@
 		return 0;
 	}
 
-	/* Recover orignal instruction code. */
+	/* Recover original instruction code. */
 	*code = p->insn[i];
 
 	/* Shift debug trap entries. */

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 24e6bc0..8236e42 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig

@@ -678,8 +678,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/m68k/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index bd92137..6abbbb8 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig

@@ -711,8 +711,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/m68knommu/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 36a4018..ec78a57 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig

@@ -1,6 +1,7 @@
 config MIPS
 	bool
 	default y
+	select HAVE_OPROFILE
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -1754,8 +1755,8 @@
 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below.
 
-	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-	  available at <http://www.tldp.org/docs.html#howto>.
+	  See also the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -2095,8 +2096,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/mips/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index abfc4bc..310d5df 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c

@@ -99,7 +99,7 @@
 #endif
 
        if (assert && devsel != 0) {
-               // supress signal to cardbus
+               // suppress signal to cardbus
                au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
        }
        else {

diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 9b34238..77db347 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c

@@ -98,7 +98,7 @@
 jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 {
 	/*
-	 * Convert jiffies to nanoseconds and seperate with
+	 * Convert jiffies to nanoseconds and separate with
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;

diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index da41eac..08f4cd7 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c

@@ -100,7 +100,7 @@
 jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 {
 	/*
-	 * Convert jiffies to nanoseconds and seperate with
+	 * Convert jiffies to nanoseconds and separate with
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;

diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index f6704ab..998c4ef 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c

@@ -221,7 +221,7 @@
 		}
 	}
 
-	/* Run the syscall at the priviledge of the user who loaded the
+	/* Run the syscall at the privilege of the user who loaded the
 	   SP program */
 
 	if (vpe_getuid(tclimit))

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 269c252..c032409 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c

@@ -424,13 +424,13 @@
 #endif	/* CONFIG_SGI_IP27 */
 
 /*
- * arch_mem_init - initialize memory managment subsystem
+ * arch_mem_init - initialize memory management subsystem
  *
  *  o plat_mem_setup() detects the memory configuration and will record detected
  *    memory areas using add_memory_region.
  *
  * At this stage the memory configuration of the system is known to the
- * kernel but generic memory managment system is still entirely uninitialized.
+ * kernel but generic memory management system is still entirely uninitialized.
  *
  *  o bootmem_init()
  *  o sparse_init()

diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 85f700e..b42e71c 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c

@@ -65,7 +65,7 @@
 static atomic_t ipi_timer_latch[NR_CPUS];
 
 /*
- * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ * Number of InterProcessor Interrupt (IPI) message buffers to allocate
  */
 
 #define IPIBUF_PER_CPU 4
@@ -780,7 +780,7 @@
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
 		if (type == SMTC_CLOCK_TICK)
 			atomic_inc(&ipi_timer_latch[cpu]);
-		/* If not on same VPE, enqueue and send cross-VPE interupt */
+		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
 		settc(cpu_data[cpu].tc_id);
@@ -1063,7 +1063,7 @@
 		return;
 
 	if (!cpu_has_vint)
-		panic("SMTC Kernel requires Vectored Interupt support");
+		panic("SMTC Kernel requires Vectored Interrupt support");
 
 	set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
 

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 02bd180..53ec052 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c

@@ -1101,7 +1101,7 @@
 	/*
 	 * Do the probing thing on R4000SC and R4400SC processors.  Other
 	 * processors don't have a S-cache that would be relevant to the
-	 * Linux memory managment.
+	 * Linux memory management.
 	 */
 	switch (c->cputype) {
 	case CPU_R4000SC:

diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index 524b371..a1fa4ab 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c

@@ -168,7 +168,7 @@
 }
 
 /*
- * hub_pio_init  -  PIO-related hub initalization
+ * hub_pio_init  -  PIO-related hub initialization
  *
  * @hub:	hubinfo structure for our hub
  */

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 2b649c4..028d8a0 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig

@@ -7,6 +7,7 @@
 
 config PARISC
 	def_bool y
+	select HAVE_OPROFILE
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
@@ -205,9 +206,8 @@
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
-	  at <http://www.tldp.org/docs.html#howto>.
+	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -272,8 +272,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/parisc/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 395bbce..e10d25d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c

@@ -305,7 +305,7 @@
 	/* save the current process space and pgd */
 	unsigned long space = mfsp(3), pgd = mfctl(25);
 
-	/* we don't mind taking interrups since they may not
+	/* we don't mind taking interrupts since they may not
 	 * do anything with user space, but we can't
 	 * be preempted here */
 	preempt_disable();

diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 04848b2..84b9611 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c

@@ -1187,7 +1187,7 @@
 	{HPHW_FIO, 0x005, 0x000A9, 0x00, "AllegroLow Core PCI USB KB"}, 
 	{HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI SuperIO RS-232"}, 
 	{HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI USB KB"}, 
-	{HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscelaneous PCI Plug-in"}, 
+	{HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscellaneous PCI Plug-in"},
 	{HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI SuperIO RS-232"}, 
 	{HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI USB KB"}, 
 	{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, 

diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 2ce3806..58fccc9 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c

@@ -333,7 +333,7 @@
 	flush_user_icache_range((unsigned long) &frame->tramp[0],
 			   (unsigned long) &frame->tramp[TRAMP_SIZE]);
 
-	/* TRAMP Words 0-4, Lenght 5 = SIGRESTARTBLOCK_TRAMP
+	/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
 	 * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
 	 * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
 	 */

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4a22c99..b94d450 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig

@@ -87,6 +87,8 @@
 config PPC
 	bool
 	default y
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 
 config EARLY_PRINTK
 	bool
@@ -713,8 +715,6 @@
 
 source "lib/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/powerpc/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index db5934c..531156f 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig

@@ -42,6 +42,8 @@
 config PPC
 	bool
 	default y
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 
 config PPC32
 	bool
@@ -1256,8 +1258,6 @@
 
 source "lib/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/ppc/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 6ef54d2..82cbffd 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig

@@ -51,6 +51,8 @@
 
 config S390
 	def_bool y
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 
 source "init/Kconfig"
 
@@ -81,8 +83,8 @@
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-	  available at <http://www.tldp.org/docs.html#howto>.
+	  See also the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
 
 	  Even if you don't know what to do here, say Y.
 
@@ -526,8 +528,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/s390/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b30c4c3..1c3a908 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig

@@ -8,6 +8,7 @@
 config SUPERH
 	def_bool y
 	select EMBEDDED
+	select HAVE_OPROFILE
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -672,9 +673,8 @@
 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
-	  at <http://www.tldp.org/docs.html#howto>.
+	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -896,8 +896,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/sh/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 527adc8..99f8971 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig

@@ -48,9 +48,8 @@
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -63,6 +62,7 @@
 config SPARC
 	bool
 	default y
+	select HAVE_OPROFILE
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -320,8 +320,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/sparc/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 97aa50d..ad0ede2 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c

@@ -305,7 +305,7 @@
 	struct resource *res;
 	int order;
 
-	/* XXX why are some lenghts signed, others unsigned? */
+	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
 		return NULL;
 	}
@@ -393,7 +393,7 @@
  */
 dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction)
 {
-	/* XXX why are some lenghts signed, others unsigned? */
+	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
 		return 0;
 	}

diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 158522f..a8c6366 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig

@@ -8,6 +8,8 @@
 config SPARC
 	bool
 	default y
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 
 config SPARC64
 	bool
@@ -166,9 +168,8 @@
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -465,8 +466,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/sparc64/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index dd1689b..55945db 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig

@@ -289,6 +289,4 @@
 	bool
 	default n
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/um/Kconfig.debug"

diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
index 7457436..1407018 100644
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c

@@ -112,7 +112,7 @@
 	err |= PUTREG(regs, RSI, to, si);
 	err |= PUTREG(regs, RBP, to, bp);
 	/*
-	 * Must use orignal RSP, which is passed in, rather than what's in
+	 * Must use original RSP, which is passed in, rather than what's in
 	 * the pt_regs, because that's already been updated to point at the
 	 * signal frame.
 	 */

diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index b6a50b8..ace479a 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig

@@ -331,8 +331,6 @@
 
 source "drivers/usb/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/v850/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7109037..99af127 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig

@@ -18,6 +18,8 @@
 ### Arch settings
 config X86
 	def_bool y
+	select HAVE_OPROFILE
+	select HAVE_KPROBES
 
 config GENERIC_LOCKBREAK
 	def_bool n
@@ -106,10 +108,6 @@
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool X86_64
 
-config ARCH_SUPPORTS_OPROFILE
-	bool
-	default y
-
 select HAVE_KVM
 
 config ARCH_HIBERNATION_POSSIBLE
@@ -204,8 +202,7 @@
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/i386/IO-APIC.txt>,
+	  See also <file:Documentation/i386/IO-APIC.txt>,
 	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1597,8 +1594,6 @@
 
 source "fs/Kconfig"
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/x86/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/arch/x86/lib/bitops_32.c b/arch/x86/lib/bitops_32.c
index afd0045..b654404 100644
--- a/arch/x86/lib/bitops_32.c
+++ b/arch/x86/lib/bitops_32.c

@@ -2,7 +2,7 @@
 #include <linux/module.h>
 
 /**
- * find_next_bit - find the first set bit in a memory region
+ * find_next_bit - find the next set bit in a memory region
  * @addr: The address to base the search on
  * @offset: The bitnumber to start searching at
  * @size: The maximum size to search

diff --git a/arch/x86/lib/bitops_64.c b/arch/x86/lib/bitops_64.c
index 95b6d96..0e8f491e 100644
--- a/arch/x86/lib/bitops_64.c
+++ b/arch/x86/lib/bitops_64.c

@@ -58,7 +58,7 @@
 }
 
 /**
- * find_next_zero_bit - find the first zero bit in a memory region
+ * find_next_zero_bit - find the next zero bit in a memory region
  * @addr: The address to base the search on
  * @offset: The bitnumber to start searching at
  * @size: The maximum size to search

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 844721e..5d5546c 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig

@@ -246,8 +246,6 @@
 	  provide one yourself.
 endmenu
 
-source "kernel/Kconfig.instrumentation"
-
 source "arch/xtensa/Kconfig.debug"
 
 source "security/Kconfig"

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index cbfe9ae..d9d531c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c

@@ -830,7 +830,7 @@
 	if (ACPI_SUCCESS(status))
 		device->flags.wake_capable = 1;
 
-	/* TBD: Peformance management */
+	/* TBD: Performance management */
 
 	return 0;
 }

diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
index cbbd331..b630ee1 100644
--- a/drivers/acpi/utilities/utresrc.c
+++ b/drivers/acpi/utilities/utresrc.c

@@ -1,6 +1,6 @@
 /*******************************************************************************
  *
- * Module Name: utresrc - Resource managment utilities
+ * Module Name: utresrc - Resource management utilities
  *
  ******************************************************************************/
 

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 47892e6..4b99ed0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c

@@ -837,7 +837,7 @@
 	if (is_slave) {
 		/* clear TIME1|IE1|PPE1|DTE1 */
 		master_data &= 0xff0f;
-		/* Enable SITRE (seperate slave timing register) */
+		/* Enable SITRE (separate slave timing register) */
 		master_data |= 0x4000;
 		/* enable PPE1, IE1 and TIME1 as needed */
 		master_data |= (control << 4);

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bdbd55a..361cf50 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c

@@ -3097,7 +3097,7 @@
 /**
  *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Standard implementation of the function used to tune and set
  *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If

diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 67e574d..db057b1 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c

@@ -324,7 +324,7 @@
 	if (irq < 0)
 		return irq;
 
-	/* Setup struct containing private infomation */
+	/* Setup struct containing private information */
 	info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;

diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 043dcd3..dc33220 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c

@@ -135,7 +135,7 @@
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0x0F << shift;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;

diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 1eda821..e0c2cc2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c

@@ -128,7 +128,7 @@
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 87546d9..dc7e915 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c

@@ -345,7 +345,7 @@
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device */
+		   the higher bits are dependant on the device */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
@@ -385,7 +385,7 @@
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device, bit 15 udma */
+		   the higher bits are dependant on the device, bit 15 udma */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {

diff --git a/drivers/base/core.c b/drivers/base/core.c
index b172787..9c0070b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c

@@ -423,10 +423,8 @@
 int device_create_file(struct device *dev, struct device_attribute *attr)
 {
 	int error = 0;
-	if (get_device(dev)) {
+	if (dev)
 		error = sysfs_create_file(&dev->kobj, &attr->attr);
-		put_device(dev);
-	}
 	return error;
 }
 
@@ -437,10 +435,8 @@
  */
 void device_remove_file(struct device *dev, struct device_attribute *attr)
 {
-	if (get_device(dev)) {
+	if (dev)
 		sysfs_remove_file(&dev->kobj, &attr->attr);
-		put_device(dev);
-	}
 }
 
 /**
@@ -1144,25 +1140,11 @@
 }
 EXPORT_SYMBOL_GPL(device_create);
 
-/**
- * find_device - finds a device that was created with device_create()
- * @class: pointer to the struct class that this device was registered with
- * @devt: the dev_t of the device that was previously registered
- */
-static struct device *find_device(struct class *class, dev_t devt)
+static int __match_devt(struct device *dev, void *data)
 {
-	struct device *dev = NULL;
-	struct device *dev_tmp;
+	dev_t *devt = data;
 
-	down(&class->sem);
-	list_for_each_entry(dev_tmp, &class->devices, node) {
-		if (dev_tmp->devt == devt) {
-			dev = dev_tmp;
-			break;
-		}
-	}
-	up(&class->sem);
-	return dev;
+	return dev->devt == *devt;
 }
 
 /**
@@ -1177,9 +1159,11 @@
 {
 	struct device *dev;
 
-	dev = find_device(class, devt);
-	if (dev)
+	dev = class_find_device(class, &devt, __match_devt);
+	if (dev) {
+		put_device(dev);
 		device_unregister(dev);
+	}
 }
 EXPORT_SYMBOL_GPL(device_destroy);
 
@@ -1203,9 +1187,11 @@
 {
 	struct device *dev;
 
-	dev = find_device(class, devt);
-	if (dev)
+	dev = class_find_device(class, &devt, __match_devt);
+	if (dev) {
 		device_pm_schedule_removal(dev);
+		put_device(dev);
+	}
 }
 EXPORT_SYMBOL_GPL(destroy_suspended_device);
 #endif /* CONFIG_PM_SLEEP */

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index a35f041..ba75184 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c

@@ -97,10 +97,9 @@
 		       struct driver_attribute *attr)
 {
 	int error;
-	if (get_driver(drv)) {
+	if (drv)
 		error = sysfs_create_file(&drv->p->kobj, &attr->attr);
-		put_driver(drv);
-	} else
+	else
 		error = -EINVAL;
 	return error;
 }
@@ -114,10 +113,8 @@
 void driver_remove_file(struct device_driver *drv,
 			struct driver_attribute *attr)
 {
-	if (get_driver(drv)) {
+	if (drv)
 		sysfs_remove_file(&drv->p->kobj, &attr->attr);
-		put_driver(drv);
-	}
 }
 EXPORT_SYMBOL_GPL(driver_remove_file);
 

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 200ed5f..bdc03f7 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c

@@ -129,6 +129,7 @@
 	list_move_tail(&dev->power.entry, &dpm_destroy);
 	mutex_unlock(&dpm_list_mtx);
 }
+EXPORT_SYMBOL_GPL(device_pm_schedule_removal);
 
 /**
  *	pm_sleep_lock - mutual exclusion for registration and suspend

diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 6f0dfca..e32d3bd 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h

@@ -13,7 +13,6 @@
 
 extern void device_pm_add(struct device *);
 extern void device_pm_remove(struct device *);
-extern void device_pm_schedule_removal(struct device *);
 extern int pm_sleep_lock(void);
 extern void pm_sleep_unlock(void);
 

diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 63ee6c0..55178e9 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c

@@ -1453,7 +1453,7 @@
 	rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, 
 		(unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 
 		TYPE_MSG);
-	/* sendcmd turned off interrputs on the board, turn 'em back on. */
+	/* sendcmd turned off interrupts on the board, turn 'em back on. */
 	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
 	if (rc == 0)
 		return SUCCESS;
@@ -1483,7 +1483,7 @@
 		0, 2, 0, 0, 
 		(unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], 
 		TYPE_MSG);
-	/* sendcmd turned off interrputs on the board, turn 'em back on. */
+	/* sendcmd turned off interrupts on the board, turn 'em back on. */
 	(*c)->access.set_intr_mask(*c, CCISS_INTR_ON);
 	if (rc == 0)
 		return SUCCESS;

diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 08f48d5..dade162 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c

@@ -383,7 +383,7 @@
 	outb(lcr, iobase + UART_LCR);	/* Set 8N1  */
 	outb(fcr, iobase + UART_FCR);	/* Enable FIFO's */
 
-	/* Turn on interrups */
+	/* Turn on interrupts */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
 	spin_unlock_irqrestore(&(info->lock), flags);

diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index e8d50af..ef5e6b1 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c

@@ -506,6 +506,7 @@
 	vma->vm_ops = &drm_vm_dma_ops;
 
 	vma->vm_flags |= VM_RESERVED;	/* Don't swap */
+	vma->vm_flags |= VM_DONTEXPAND;
 
 	vma->vm_file = filp;	/* Needed for drm_vm_open() */
 	drm_vm_open_locked(vma);
@@ -655,6 +656,7 @@
 		return -EINVAL;	/* This should never happen. */
 	}
 	vma->vm_flags |= VM_RESERVED;	/* Don't swap */
+	vma->vm_flags |= VM_DONTEXPAND;
 
 	vma->vm_file = filp;	/* Needed for drm_vm_open() */
 	drm_vm_open_locked(vma);

diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 3ae57ec..fa194a4 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h

@@ -584,7 +584,7 @@
 #define R300_RE_FOG_START                     0x4298
 
 /* Not sure why there are duplicate of factor and constant values.
- * My best guess so far is that there are seperate zbiases for test and write.
+ * My best guess so far is that there are separate zbiases for test and write.
  * Ordering might be wrong.
  * Some of the tests indicate that fgl has a fallback implementation of zbias
  * via pixel shaders.

diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 75d6b74..7009dbd 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c

@@ -400,7 +400,7 @@
 }
 
 /*
- * This function is used internally by ring buffer mangement code.
+ * This function is used internally by ring buffer management code.
  *
  * Returns virtual pointer to ring buffer.
  */

diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 004141d..49233f5 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c

@@ -18,7 +18,7 @@
  *
  * NOTES:
  *	- Locking is required for safe execution of EFI calls with regards
- *	  to interrrupts and SMP.
+ *	  to interrupts and SMP.
  *
  * TODO (December 1999):
  * 	- provide the API to set/get the WakeUp Alarm (different from the

diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ffcecde..ffd747c 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c

@@ -1797,7 +1797,7 @@
 	res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
 	/*
 	 * This gets a little confusing. The Digi cards have their own
-	 * representation of c_cflags controling baud rate. For the most part
+	 * representation of c_cflags controlling baud rate. For the most part
 	 * this is identical to the Linux implementation. However; Digi
 	 * supports one rate (76800) that Linux doesn't. This means that the
 	 * c_cflag entry that would normally mean 76800 for Digi actually means
@@ -2068,7 +2068,7 @@
 		{
 			/*
 			 * This call is made by the apps to complete the
-			 * initilization of the board(s). This routine is
+			 * initialization of the board(s). This routine is
 			 * responsible for setting the card to its initial
 			 * state and setting the drivers control fields to the
 			 * sutianle settings for the card in question.

diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index 0e8ceea..712d9f2 100644
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c

@@ -26,7 +26,7 @@
  * The hangcheck-timer driver uses the TSC to catch delays that
  * jiffies does not notice.  A timer is set.  When the timer fires, it
  * checks whether it was delayed and if that delay exceeds a given
- * margin of error.  The hangcheck_tick module paramter takes the timer
+ * margin of error.  The hangcheck_tick module parameter takes the timer
  * duration in seconds.  The hangcheck_margin parameter defines the
  * margin of error, in seconds.  The defaults are 60 seconds for the
  * timer and 180 seconds for the margin of error.  IOW, a timer is set

diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index fd75590..3402def 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c

@@ -838,7 +838,7 @@
 	if (!hvcsd)
 		return -ENODEV;
 
-	/* By this time the vty-server won't be getting any more interrups */
+	/* By this time the vty-server won't be getting any more interrupts */
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 

diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index e46120d..d6567b3 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c

@@ -661,7 +661,7 @@
 		if (!in_interrupt()) {
 			schedule_timeout_interruptible(1);	// short nap
 		} else {
-			// we cannot sched/sleep in interrrupt silly
+			// we cannot sched/sleep in interrupt silly
 			return 0;   
 		}
 		if (signal_pending(current)) {

diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index e04e66c..0f49ccf 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c

@@ -1251,7 +1251,7 @@
 
 	// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
 	// It will NOT poll boards handled by hard interrupts.
-	// The issue of queued BH interrups is handled in ip2_interrupt().
+	// The issue of queued BH interrupts is handled in ip2_interrupt().
 	ip2_polled_interrupt();
 
 	PollTimer.expires = POLL_TIMEOUT;

diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 82f2e27..ff146c2 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c

@@ -283,7 +283,7 @@
 	vdata->refcnt = ATOMIC_INIT(1);
 	vma->vm_private_data = vdata;
 
-	vma->vm_flags |= (VM_IO | VM_RESERVED | VM_PFNMAP);
+	vma->vm_flags |= (VM_IO | VM_RESERVED | VM_PFNMAP | VM_DONTEXPAND);
 	if (vdata->type == MSPEC_FETCHOP || vdata->type == MSPEC_UNCACHED)
 		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	vma->vm_ops = &mspec_vm_ops;

diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 6076e66..dfaab23 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c

@@ -2,7 +2,7 @@
  * nozomi.c  -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
  *
  * Written by: Ulf Jakobsson,
- *             Jan �erfeldt,
+ *             Jan Åkerfeldt,
  *             Stefan Thomasson,
  *
  * Maintained by: Paul Hardwick (p.hardwick@option.com)
@@ -38,60 +38,6 @@
  * --------------------------------------------------------------------------
  */
 
-/*
- * CHANGELOG
- * Version 2.1d
- * 11-November-2007 Jiri Slaby, Frank Seidel
- * - Big rework of multicard support by Jiri
- * - Major cleanups (semaphore to mutex, endianess, no major reservation)
- * - Optimizations
- *
- * Version 2.1c
- * 30-October-2007 Frank Seidel
- * - Completed multicard support
- * - Minor cleanups
- *
- * Version 2.1b
- * 07-August-2007 Frank Seidel
- * - Minor cleanups
- * - theoretical multicard support
- *
- * Version 2.1
- * 03-July-2006 Paul Hardwick
- *
- * - Stability Improvements. Incorporated spinlock wraps patch.
- * - Updated for newer 2.6.14+ kernels (tty_buffer_request_room)
- * - using __devexit macro for tty
- *
- *
- * Version 2.0
- * 08-feb-2006 15:34:10:Ulf
- *
- * -Fixed issue when not waking up line disipine layer, could probably result
- *  in better uplink performance for 2.4.
- *
- * -Fixed issue with big endian during initalization, now proper toggle flags
- *  are handled between preloader and maincode.
- *
- * -Fixed flow control issue.
- *
- * -Added support for setting DTR.
- *
- * -For 2.4 kernels, removing temporary buffer that's not needed.
- *
- * -Reading CTS only for modem port (only port that supports it).
- *
- * -Return 0 in write_room instead of netative value, it's not handled in
- *  upper layer.
- *
- * --------------------------------------------------------------------------
- * Version 1.0
- *
- * First version of driver, only tested with card of type F32_2.
- * Works fine with 2.4 and 2.6 kernels.
- * Driver also support big endian architecture.
- */
-
 /* Enable this to have a lot of debug printouts */
 #define DEBUG
 
@@ -143,8 +89,9 @@
 /* Do we need this settable at runtime? */
 static int debug = NOZOMI_DEBUG_LEVEL;
 
-#define D(lvl, args...)  do {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
-				while (0)
+#define D(lvl, args...)  do \
+			{if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
+			while (0)
 #define D_(lvl, args...) D(lvl, ##args)
 
 /* These printouts are always printed */
@@ -273,13 +220,13 @@
 /* Big endian */
 
 struct toggles {
-	unsigned enabled:5;	/*
+	unsigned int enabled:5;	/*
 				 * Toggle fields are valid if enabled is 0,
 				 * else A-channels must always be used.
 				 */
-	unsigned diag_dl:1;
-	unsigned mdm_dl:1;
-	unsigned mdm_ul:1;
+	unsigned int diag_dl:1;
+	unsigned int mdm_dl:1;
+	unsigned int mdm_ul:1;
 } __attribute__ ((packed));
 
 /* Configuration table to read at startup of card */
@@ -320,19 +267,19 @@
 /* This stores all control downlink flags */
 struct ctrl_dl {
 	u8 port;
-	unsigned reserved:4;
-	unsigned CTS:1;
-	unsigned RI:1;
-	unsigned DCD:1;
-	unsigned DSR:1;
+	unsigned int reserved:4;
+	unsigned int CTS:1;
+	unsigned int RI:1;
+	unsigned int DCD:1;
+	unsigned int DSR:1;
 } __attribute__ ((packed));
 
 /* This stores all control uplink flags */
 struct ctrl_ul {
 	u8 port;
-	unsigned reserved:6;
-	unsigned RTS:1;
-	unsigned DTR:1;
+	unsigned int reserved:6;
+	unsigned int RTS:1;
+	unsigned int DTR:1;
 } __attribute__ ((packed));
 
 #else
@@ -340,10 +287,10 @@
 
 /* This represents the toggle information */
 struct toggles {
-	unsigned mdm_ul:1;
-	unsigned mdm_dl:1;
-	unsigned diag_dl:1;
-	unsigned enabled:5;	/*
+	unsigned int mdm_ul:1;
+	unsigned int mdm_dl:1;
+	unsigned int diag_dl:1;
+	unsigned int enabled:5;	/*
 				 * Toggle fields are valid if enabled is 0,
 				 * else A-channels must always be used.
 				 */
@@ -379,19 +326,19 @@
 
 /* This stores all control downlink flags */
 struct ctrl_dl {
-	unsigned DSR:1;
-	unsigned DCD:1;
-	unsigned RI:1;
-	unsigned CTS:1;
-	unsigned reserverd:4;
+	unsigned int DSR:1;
+	unsigned int DCD:1;
+	unsigned int RI:1;
+	unsigned int CTS:1;
+	unsigned int reserverd:4;
 	u8 port;
 } __attribute__ ((packed));
 
 /* This stores all control uplink flags */
 struct ctrl_ul {
-	unsigned DTR:1;
-	unsigned RTS:1;
-	unsigned reserved:6;
+	unsigned int DTR:1;
+	unsigned int RTS:1;
+	unsigned int reserved:6;
 	u8 port;
 } __attribute__ ((packed));
 #endif
@@ -448,7 +395,7 @@
 } __attribute__ ((packed));
 
 /*    Global variables */
-static struct pci_device_id nozomi_pci_tbl[] = {
+static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
 	{PCI_DEVICE(VENDOR1, DEVICE1)},
 	{},
 };
@@ -524,12 +471,12 @@
  * -Optimize
  * -Rewrite cleaner
  */
-static u32 write_mem32(void __iomem *mem_addr_start, u32 *buf,
+static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
 			u32 size_bytes)
 {
 	u32 i = 0;
 	u32 *ptr = (__force u32 *) mem_addr_start;
-	u16 *buf16;
+	const u16 *buf16;
 
 	if (unlikely(!ptr || !buf))
 		return 0;
@@ -537,7 +484,7 @@
 	/* shortcut for extremely often used cases */
 	switch (size_bytes) {
 	case 2:	/* 2 bytes */
-		buf16 = (u16 *) buf;
+		buf16 = (const u16 *)buf;
 		writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
 		return 2;
 		break;
@@ -554,7 +501,7 @@
 	while (i < size_bytes) {
 		if (size_bytes - i == 2) {
 			/* 2 bytes */
-			buf16 = (u16 *) buf;
+			buf16 = (const u16 *)buf;
 			writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
 			i += 2;
 		} else {
@@ -694,7 +641,7 @@
 	   dc->config_table.ul_ctrl_len);
 }
 #else
-static __inline__ void dump_table(const struct nozomi *dc) { }
+static inline void dump_table(const struct nozomi *dc) { }
 #endif
 
 /*
@@ -776,8 +723,7 @@
 /* Enable uplink interrupts  */
 static void enable_transmit_ul(enum port_type port, struct nozomi *dc)
 {
-	u16 mask[NOZOMI_MAX_PORTS] = \
-			{MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
+	static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
 
 	if (port < NOZOMI_MAX_PORTS) {
 		dc->last_ier |= mask[port];
@@ -790,8 +736,8 @@
 /* Disable uplink interrupts  */
 static void disable_transmit_ul(enum port_type port, struct nozomi *dc)
 {
-	u16 mask[NOZOMI_MAX_PORTS] = \
-			{~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
+	static const u16 mask[] =
+		{~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
 
 	if (port < NOZOMI_MAX_PORTS) {
 		dc->last_ier &= mask[port];
@@ -804,8 +750,7 @@
 /* Enable downlink interrupts */
 static void enable_transmit_dl(enum port_type port, struct nozomi *dc)
 {
-	u16 mask[NOZOMI_MAX_PORTS] = \
-			{MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
+	static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
 
 	if (port < NOZOMI_MAX_PORTS) {
 		dc->last_ier |= mask[port];
@@ -818,8 +763,8 @@
 /* Disable downlink interrupts */
 static void disable_transmit_dl(enum port_type port, struct nozomi *dc)
 {
-	u16 mask[NOZOMI_MAX_PORTS] = \
-			{~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
+	static const u16 mask[] =
+		{~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
 
 	if (port < NOZOMI_MAX_PORTS) {
 		dc->last_ier &= mask[port];
@@ -833,13 +778,13 @@
  * Return 1 - send buffer to card and ack.
  * Return 0 - don't ack, don't send buffer to card.
  */
-static int send_data(enum port_type index, struct nozomi *dc)
+static int send_data(enum port_type index, const struct nozomi *dc)
 {
 	u32 size = 0;
-	struct port *port = &dc->port[index];
-	u8 toggle = port->toggle_ul;
+	const struct port *port = &dc->port[index];
+	const u8 toggle = port->toggle_ul;
 	void __iomem *addr = port->ul_addr[toggle];
-	u32 ul_size = port->ul_size[toggle];
+	const u32 ul_size = port->ul_size[toggle];
 	struct tty_struct *tty = port->tty;
 
 	/* Get data from tty and place in buf for now */
@@ -1102,7 +1047,7 @@
 }
 
 /*
- * Handle donlink data, ports that are handled are modem and diagnostics
+ * Handle downlink data, ports that are handled are modem and diagnostics
  * Return 1 - ok
  * Return 0 - toggle fields are out of sync
  */
@@ -1359,20 +1304,20 @@
 static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
-	struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+	const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
 
 	return sprintf(buf, "%d\n", dc->card_type);
 }
-static DEVICE_ATTR(card_type, 0444, card_type_show, NULL);
+static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);
 
 static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
-	struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+	const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
 
 	return sprintf(buf, "%u\n", dc->open_ttys);
 }
-static DEVICE_ATTR(open_ttys, 0444, open_ttys_show, NULL);
+static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);
 
 static void make_sysfs_files(struct nozomi *dc)
 {
@@ -1735,7 +1680,7 @@
 {
 	struct port *port = tty->driver_data;
 	int room = 0;
-	struct nozomi *dc = get_dc_by_tty(tty);
+	const struct nozomi *dc = get_dc_by_tty(tty);
 
 	if (!dc || !port)
 		return 0;
@@ -1755,9 +1700,9 @@
 /* Gets io control parameters */
 static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
 {
-	struct port *port = tty->driver_data;
-	struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
-	struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
+	const struct port *port = tty->driver_data;
+	const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
+	const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
 
 	return	(ctrl_ul->RTS ? TIOCM_RTS : 0) |
 		(ctrl_ul->DTR ? TIOCM_DTR : 0) |
@@ -1787,7 +1732,7 @@
 static int ntty_cflags_changed(struct port *port, unsigned long flags,
 		struct async_icount *cprev)
 {
-	struct async_icount cnow = port->tty_icount;
+	const struct async_icount cnow = port->tty_icount;
 	int ret;
 
 	ret =	((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
@@ -1802,7 +1747,7 @@
 
 static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
 {
-	struct async_icount cnow = port->tty_icount;
+	const struct async_icount cnow = port->tty_icount;
 	struct serial_icounter_struct icount;
 
 	icount.cts = cnow.cts;
@@ -1882,7 +1827,10 @@
 /* just to discard single character writes */
 static void ntty_put_char(struct tty_struct *tty, unsigned char c)
 {
-	/* FIXME !!! */
+	/*
+	 * card does not react correct when we write single chars
+	 * to the card, so we discard them
+	 */
 	DBG2("PUT CHAR Function: %c", c);
 }
 
@@ -1910,7 +1858,7 @@
 	return rval;
 }
 
-static struct tty_operations tty_ops = {
+static const struct tty_operations tty_ops = {
 	.ioctl = ntty_ioctl,
 	.open = ntty_open,
 	.close = ntty_close,

diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 905d1f5..d010ed9 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c

@@ -1544,7 +1544,7 @@
 
 /* mgsl_isr_misc()
  * 
- * 	Service a miscellaneos interrupt source.
+ * 	Service a miscellaneous interrupt source.
  * 	
  * Arguments:		info		pointer to device extension (instance data)
  * Return Value:	None

diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 5422f99..ce5ebe3 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c

@@ -505,7 +505,7 @@
 	if (tosh_probe())
 		return -ENODEV;
 
-	printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n");
+	printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
 
 	/* set the port to use for Fn status if not specified as a parameter */
 	if (tosh_fn==0x00)

diff --git a/drivers/dio/dio-driver.c b/drivers/dio/dio-driver.c
index e4c48e3..8cd8507 100644
--- a/drivers/dio/dio-driver.c
+++ b/drivers/dio/dio-driver.c

@@ -15,16 +15,15 @@
 #include <linux/dio.h>
 
 
-	/**
-	 *  dio_match_device - Tell if a DIO device structure has a matching
-	 *                     DIO device id structure
-	 *  @ids: array of DIO device id structures to search in
-	 *  @dev: the DIO device structure to match against
-	 *
-	 *  Used by a driver to check whether a DIO device present in the
-	 *  system is in its list of supported devices. Returns the matching
-	 *  dio_device_id structure or %NULL if there is no match.
-	 */
+/**
+ *  dio_match_device - Tell if a DIO device structure has a matching DIO device id structure
+ *  @ids: array of DIO device id structures to search in
+ *  @d: the DIO device structure to match against
+ *
+ *  Used by a driver to check whether a DIO device present in the
+ *  system is in its list of supported devices. Returns the matching
+ *  dio_device_id structure or %NULL if there is no match.
+ */
 
 const struct dio_device_id *
 dio_match_device(const struct dio_device_id *ids,
@@ -66,13 +65,13 @@
 }
 
 
-	/**
-	 *  dio_register_driver - register a new DIO driver
-	 *  @drv: the driver structure to register
-	 *
-	 *  Adds the driver structure to the list of registered drivers
-	 *  Returns zero or a negative error value.
-	 */
+/**
+ *  dio_register_driver - register a new DIO driver
+ *  @drv: the driver structure to register
+ *
+ *  Adds the driver structure to the list of registered drivers
+ *  Returns zero or a negative error value.
+ */
 
 int dio_register_driver(struct dio_driver *drv)
 {
@@ -85,15 +84,15 @@
 }
 
 
-	/**
-	 *  dio_unregister_driver - unregister a DIO driver
-	 *  @drv: the driver structure to unregister
-	 *
-	 *  Deletes the driver structure from the list of registered DIO drivers,
-	 *  gives it a chance to clean up by calling its remove() function for
-	 *  each device it was responsible for, and marks those devices as
-	 *  driverless.
-	 */
+/**
+ *  dio_unregister_driver - unregister a DIO driver
+ *  @drv: the driver structure to unregister
+ *
+ *  Deletes the driver structure from the list of registered DIO drivers,
+ *  gives it a chance to clean up by calling its remove() function for
+ *  each device it was responsible for, and marks those devices as
+ *  driverless.
+ */
 
 void dio_unregister_driver(struct dio_driver *drv)
 {
@@ -101,16 +100,15 @@
 }
 
 
-	/**
-	 *  dio_bus_match - Tell if a DIO device structure has a matching DIO
-	 *                  device id structure
-	 *  @ids: array of DIO device id structures to search in
-	 *  @dev: the DIO device structure to match against
-	 *
-	 *  Used by a driver to check whether a DIO device present in the
-	 *  system is in its list of supported devices. Returns the matching
-	 *  dio_device_id structure or %NULL if there is no match.
-	 */
+/**
+ *  dio_bus_match - Tell if a DIO device structure has a matching DIO device id structure
+ *  @dev: the DIO device structure to match against
+ *  @drv: the &device_driver that points to the array of DIO device id structures to search
+ *
+ *  Used by a driver to check whether a DIO device present in the
+ *  system is in its list of supported devices. Returns the matching
+ *  dio_device_id structure or %NULL if there is no match.
+ */
 
 static int dio_bus_match(struct device *dev, struct device_driver *drv)
 {

diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 5dee9f5..e0b47b7 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c

@@ -73,7 +73,7 @@
  *
  *	Last action on the pci control structure.
  *
- *	call the remove sysfs informaton, which will unregister
+ *	call the remove sysfs information, which will unregister
  *	this control struct's kobj. When that kobj's ref count
  *	goes to zero, its release function will be call and then
  *	kfree() the memory.

diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index a1f24c4..5a85201 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c

@@ -351,7 +351,7 @@
 	u16 b1_ambpresent0;	/* Branch 1, Channel 8 */
 	u16 b1_ambpresent1;	/* Branch 1, Channel 1 */
 
-	/* DIMM infomation matrix, allocating architecture maximums */
+	/* DIMM information matrix, allocating architecture maximums */
 	struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS];
 
 	/* Actual values for this controller */

diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index d168223..7440119 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c

@@ -11,7 +11,7 @@
  *
  * This code takes information provided by BIOS EDD calls
  * fn41 - Check Extensions Present and
- * fn48 - Get Device Parametes with EDD extensions
+ * fn48 - Get Device Parameters with EDD extensions
  * made in setup.S, copied to safe structures in setup.c,
  * and presents it in sysfs.
  *

diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
index adeda76..3b12ffe 100644
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h

@@ -199,7 +199,7 @@
 	}
 
 /*
- * Lenghten active & recovery time so that cycle time is correct.
+ * Lengthen active & recovery time so that cycle time is correct.
  */
 
 	if (t->act8b + t->rec8b < t->cyc8b) {

diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 1dc2ac9..c5600ac 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c

@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/wait.h>
-#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>

diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index e5f4da9..05e3494 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c

@@ -42,7 +42,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/irq.h>
 
 #include <asm/portmux.h>
 #include <asm/mach/bf54x_keys.h>

diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index e6696b3..986f93c 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c

@@ -17,7 +17,6 @@
  */
 #include <linux/device.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/input.h>

diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3e99df6..adc3bd6 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c

@@ -141,7 +141,7 @@
 /*
  * gscps2_writeb_output() - write a byte to the port
  *
- * returns 1 on sucess, 0 on error
+ * returns 1 on success, 0 on error
  */
 
 static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data)

diff --git a/drivers/isdn/hardware/eicon/debuglib.c b/drivers/isdn/hardware/eicon/debuglib.c
index a19b7ff..e39c5c1 100644
--- a/drivers/isdn/hardware/eicon/debuglib.c
+++ b/drivers/isdn/hardware/eicon/debuglib.c

@@ -106,7 +106,7 @@
   return (1) ;
  }
 /*
- * Check if we registered whith an old maint driver (see debuglib.h)
+ * Check if we registered with an old maint driver (see debuglib.h)
  */
  if ( myDriverDebugHandle.dbg_end != NULL
    /* location of 'dbg_prt' in _OldDbgHandle_ struct */

diff --git a/drivers/isdn/hardware/eicon/debuglib.h b/drivers/isdn/hardware/eicon/debuglib.h
index 11b3b9e..016410c 100644
--- a/drivers/isdn/hardware/eicon/debuglib.h
+++ b/drivers/isdn/hardware/eicon/debuglib.h

@@ -177,7 +177,7 @@
 } }
 #endif
 /*
- * For event level debug use a separate define, the paramete are
+ * For event level debug use a separate define, the parameter are
  * different and cause compiler errors on some systems.
  */
 #define DBG_EVL_ID(args) \

diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index ce8df38..10760b3 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c

@@ -285,7 +285,7 @@
                 a->ram_in(a, &RcIn->RcId),
                 a->ram_in(a, &RcIn->RcCh),
                 a->ram_inw(a, &RcIn->Reference),
-                tmp[0],  /* type of extended informtion */
+                tmp[0],  /* type of extended information */
                 tmp[1]); /* extended information        */
         a->ram_out(a, &RcIn->Rc, 0);
       }

diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index ccd35d0..b9177ca 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c

@@ -4941,7 +4941,7 @@
       /* b = IE1                */
       /* S = IE1 length + cont. */
       /* b = IE2                */
-      /* S = IE2 lenght + cont. */
+      /* S = IE2 length + cont. */
       sendf(plci->appl,
         _MANUFACTURER_I,
         Id,

diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index f854501..d3999a8 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c

@@ -541,7 +541,7 @@
 	}
 	ctrl = &cinfo->capi_ctrl;
 	if(len < CAPI_MSG_BASELEN) {
-		printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, lenght %d!\n",
+		printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n",
 		       card->myid, len);
 		return;
 	}	

diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 7ce0ea6..2895810 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c

@@ -36,6 +36,7 @@
 #include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/kthread.h>
+#include <linux/platform_device.h>
 
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>

diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index d409f67..8ba4938 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c

@@ -12,7 +12,7 @@
  *  - maybe add timeout to commands ?
  *  - blocking version of time functions
  *  - polling version of i2c commands (including timer that works with
- *    interrutps off)
+ *    interrupts off)
  *  - maybe avoid some data copies with i2c by directly using the smu cmd
  *    buffer and a lower level internal interface
  *  - understand SMU -> CPU events and implement reception of them via
@@ -179,7 +179,7 @@
 		/* CPU might have brought back the cache line, so we need
 		 * to flush again before peeking at the SMU response. We
 		 * flush the entire buffer for now as we haven't read the
-		 * reply lenght (it's only 2 cache lines anyway)
+		 * reply length (it's only 2 cache lines anyway)
 		 */
 		faddr = (unsigned long)smu->cmd_buf;
 		flush_inval_dcache_range(faddr, faddr + 256);

diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 7d04a6f..168a8d3 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c

@@ -388,7 +388,7 @@
 	}
 	dev->revision &= 0xf;
 
-	/* remap the memory from virtual to physical adress */
+	/* remap the memory from virtual to physical address */
 
 	err = pci_request_region(pci, 0, "saa7146");
 	if (err < 0)

diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index a33eb59..ed3f826 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c

@@ -681,7 +681,7 @@
 							drop = 1;
 						/* else: destination address matches the MAC address of our receiver device */
 					}
-					/* else: promiscious mode; pass everything up the stack */
+					/* else: promiscuous mode; pass everything up the stack */
 
 					if (drop) {
 #ifdef ULE_DEBUG

diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 63a47cd..7374c02 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c

@@ -4344,7 +4344,7 @@
 	gpio_bits(0x200,0x000);
 	mdelay(1);
 
-	/* create a new conection */
+	/* create a new connection */
 	gpio_bits(0x480,0x080);
 	gpio_bits(0x480,0x480);
 	mdelay(1);

diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index 5c2c402..84b9e4f 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c

@@ -326,7 +326,7 @@
 	// initialize
 	err = indycam_write_block(client, 0, sizeof(initseq), (u8 *)&initseq);
 	if (err) {
-		printk(KERN_ERR "IndyCam initalization failed\n");
+		printk(KERN_ERR "IndyCam initialization failed\n");
 		err = -EIO;
 		goto out_detach_client;
 	}

diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index b630c26..58bab65 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c

@@ -369,7 +369,7 @@
 	.get_frequency     = microtune_get_frequency,
 };
 
-// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
+// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
 static int mt2032_init(struct dvb_frontend *fe)
 {
 	struct microtune_priv *priv = fe->tuner_priv;

diff --git a/drivers/media/video/pvrusb2/pvrusb2.h b/drivers/media/video/pvrusb2/pvrusb2.h
index 074533e..1a9a4ba 100644
--- a/drivers/media/video/pvrusb2/pvrusb2.h
+++ b/drivers/media/video/pvrusb2/pvrusb2.h

@@ -27,7 +27,7 @@
    might want to increase this - however the driver operation will not
    be impaired if it is too small.  Instead additional units just
    won't have an ID assigned and it might not be possible to specify
-   module paramters for those extra units. */
+   module parameters for those extra units. */
 #define PVR_NUM 20
 
 #endif /* __PVRUSB2_H */

diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 7300ace..f991d72 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c

@@ -542,7 +542,7 @@
 	}
 
 	if (pdev->read_frame != NULL) {
-		/* Decompression is a lenghty process, so it's outside of the lock.
+		/* Decompression is a lengthy process, so it's outside of the lock.
 		   This gives the isoc_handler the opportunity to fill more frames
 		   in the mean time.
 		*/

diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index e0ff811..ca05cd6 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c

@@ -57,7 +57,7 @@
 
 	dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
 
-	/* check if the paramters are valid */
+	/* check if the parameters are valid */
 	if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
 		return -1;
 

diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index d847273..5e7b795 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c

@@ -258,7 +258,7 @@
 	unsigned int p;
 
 	/*
-	the registers controling gain are 8 bit of which
+	the registers controlling gain are 8 bit of which
 	we affect only the last 4 bits with our gain.
 	we know that if saturation is 0, (unsaturated) then
 	we're grayscale (center axis of the colour cone) so

diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index b52b826..df52f8a 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c

@@ -131,7 +131,7 @@
 /* Function prototypes */
 static void usbvision_release(struct usb_usbvision *usbvision);
 
-/* Default initalization of device driver parameters */
+/* Default initialization of device driver parameters */
 /* Set the default format for ISOC endpoint */
 static int isocMode = ISOC_MODE_COMPRESS;
 /* Set the default Debug Mode of the device driver */

diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 8ef31ed..a913385 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c

@@ -566,7 +566,7 @@
 }
 
 /* -----------------------------------------------------------------------
- * Client managment code
+ * Client management code
  */
 
 /*

diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 6e0ac4c..690281b 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c

@@ -1270,7 +1270,7 @@
 }
 
 /*
- *   Scan for a Buz card (actually for the PCI contoler ZR36057),
+ *   Scan for a Buz card (actually for the PCI controller ZR36057),
  *   request the irq and map the io memory
  */
 static int __devinit

diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index 9f622e0..faae4ec 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c

@@ -161,7 +161,7 @@
 		udelay(1);
 		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
-				"%s: timout at wait_end (last status: 0x%02x)\n",
+				"%s: timeout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status1);
 			break;
 		}

diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index 1ef14fe..7849b65 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c

@@ -163,7 +163,7 @@
 		udelay(1);
 		if (i++ > 200000) {	// 200ms, there is for sure something wrong!!!
 			dprintk(1,
-				"%s: timout at wait_end (last status: 0x%02x)\n",
+				"%s: timeout at wait_end (last status: 0x%02x)\n",
 				ptr->name, ptr->status);
 			break;
 		}

diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 6be1f6b..af9da03 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h

@@ -162,7 +162,7 @@
 #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
                                                                           /* Bit 0 is Status Bit 0: FrameXferErr */
                                                                           /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
-                                                                          /* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
+                                                                          /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */
 
 #define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW              (0x00000500)
 #define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET      (0x00000600)

diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 6029509..e630b50 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c

@@ -1708,7 +1708,7 @@
  *
  * Outputs:	None.
  * Return:	0 if successful
- *		-EBUSY  if previous command timout and IOC reset is not complete.
+ *		-EBUSY  if previous command timeout and IOC reset is not complete.
  *		-EFAULT if data unavailable
  *		-ENODEV if no such device/adapter
  *		-ETIME	if timer expires
@@ -1748,7 +1748,7 @@
  *
  * Outputs:	None.
  * Return:	0 if successful
- *		-EBUSY  if previous command timout and IOC reset is not complete.
+ *		-EBUSY  if previous command timeout and IOC reset is not complete.
  *		-EFAULT if data unavailable
  *		-ENODEV if no such device/adapter
  *		-ETIME	if timer expires
@@ -2316,7 +2316,7 @@
  * Outputs:	None.
  * Return:	0 if successful
  *		-EFAULT if data unavailable
- *		-EBUSY  if previous command timout and IOC reset is not complete.
+ *		-EBUSY  if previous command timeout and IOC reset is not complete.
  *		-ENODEV if no such device/adapter
  *		-ETIME	if timer expires
  *		-ENOMEM if memory allocation error
@@ -2553,7 +2553,7 @@
  * Outputs:	None.
  * Return:	0 if successful
  *		-EFAULT if data unavailable
- *		-EBUSY  if previous command timout and IOC reset is not complete.
+ *		-EBUSY  if previous command timeout and IOC reset is not complete.
  *		-ENODEV if no such device/adapter
  *		-ETIME	if timer expires
  *		-ENOMEM if memory allocation error

diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 5c614ec..af1de0c 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c

@@ -1736,7 +1736,7 @@
  fail_out:
 
 	/*
-	 * Free task managment mf, and corresponding tm flags
+	 * Free task management mf, and corresponding tm flags
 	 */
 	mpt_free_msg_frame(ioc, mf);
 	hd->tmPending = 0;

diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 7814a06..da715e1 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c

@@ -916,7 +916,7 @@
  *	status block. The status block could then be accessed through
  *	c->status_block.
  *
- *	Returns 0 on sucess or negative error code on failure.
+ *	Returns 0 on success or negative error code on failure.
  */
 int i2o_status_get(struct i2o_controller *c)
 {

diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index c73e96b..90acf57 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c

@@ -376,7 +376,7 @@
 	 * hardware restriction. */
 	if (doc->mfr) {
 		if (doc->mfr == mfr && doc->id == id)
-			return 1;	/* This is another the same the first */
+			return 1;	/* This is the same as the first */
 		else
 			printk(KERN_WARNING
 			       "Flash chip at floor %d, chip %d is different:\n",

diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index e3744eb..dd38011 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c

@@ -20,7 +20,7 @@
  *
  *	02-12-2002 TG	Cleanup of module params
  *
- *	02-20-2002 TG	adjusted for different rd/wr adress support
+ *	02-20-2002 TG	adjusted for different rd/wr address support
  *			added support for read device ready/busy line
  *			added page_cache
  *
@@ -144,7 +144,7 @@
 		goto out;
 	}
 
-	/* map physical adress */
+	/* map physical address */
 	autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K);
 	if (!autcpu12_fio_base) {
 		printk("Ioremap autcpu12 SmartMedia Card failed\n");
@@ -227,7 +227,7 @@
 	/* Release resources, unregister device */
 	nand_release(autcpu12_mtd);
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap(autcpu12_fio_base);
 
 	/* Free the MTD device structure */

diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 1657ecd..a52f3a7 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c

@@ -4,7 +4,7 @@
  *	http://blackfin.uclinux.org/
  *	Bryan Wu <bryan.wu@analog.com>
  *
- * Blackfin BF5xx on-chip NAND flash controler driver
+ * Blackfin BF5xx on-chip NAND flash controller driver
  *
  * Derived from drivers/mtd/nand/s3c2410.c
  * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>

diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 89deff0..19e1594 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c

@@ -337,7 +337,7 @@
 		nand_release(cs553x_mtd[i]);
 		cs553x_mtd[i] = NULL;
 
-		/* unmap physical adress */
+		/* unmap physical address */
 		iounmap(mmio_base);
 
 		/* Free the MTD device structure */

diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 0146cdc..ba67bbe 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c

@@ -125,7 +125,7 @@
 		return -ENOMEM;
 	}
 
-	/* map physical adress */
+	/* map physical address */
 	ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
 	if (!ep7312_fio_base) {
 		printk("ioremap EDB7312 NAND flash failed\n");

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e29c1da..ddd4fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c

@@ -89,7 +89,7 @@
 			     struct mtd_oob_ops *ops);
 
 /*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
  * compiled away when LED support is disabled.
  */
 DEFINE_LED_TRIGGER(nand_led_trigger);

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 10490b4..bb885d1 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c

@@ -210,7 +210,7 @@
 #define STATE_CMD_RESET        0x0000000C /* reset */
 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
 #define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 66f76e9..2bd0737 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c

@@ -8,7 +8,7 @@
  *
  * Changelog:
  *	21-Sep-2004  BJD  Initial version
- *	23-Sep-2004  BJD  Mulitple device support
+ *	23-Sep-2004  BJD  Multiple device support
  *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
  *	12-Oct-2004  BJD  Fixed errors in use of platform data
  *	18-Feb-2005  BJD  Fix sparse errors

diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 51c7288..033f880 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c

@@ -165,7 +165,7 @@
 		return -ENOMEM;
 	}
 
-	/* map physical adress */
+	/* map physical address */
 	sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
 	if (!sharpsl_io_base) {
 		printk("ioremap to access Sharp SL NAND chip failed\n");

diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 067262ee..0513cbc 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c

@@ -429,7 +429,7 @@
 	}
 }
 
-/* calc_chain_lenght: Walk through a Virtual Unit Chain and estimate chain length */
+/* calc_chain_length: Walk through a Virtual Unit Chain and estimate chain length */
 static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
 {
 	unsigned int length = 0, block = first_block;

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e9d761c..f234ba3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig

@@ -814,8 +814,8 @@
 	  will be called smc-ultra32.
 
 config BFIN_MAC
-	tristate "Blackfin 536/537 on-chip mac support"
-	depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
+	tristate "Blackfin 527/536/537 on-chip mac support"
+	depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H)
 	select CRC32
 	select MII
 	select PHYLIB
@@ -828,7 +828,7 @@
 
 config BFIN_MAC_USE_L1
 	bool "Use L1 memory for rx/tx packets"
-	depends on BFIN_MAC && BF537
+	depends on BFIN_MAC && (BF527 || BF537)
 	default y
 	help
 	  To get maximum network performance, you should use L1 memory as rx/tx buffers.
@@ -855,7 +855,8 @@
 config BFIN_MAC_RMII
 	bool "RMII PHY Interface (EXPERIMENTAL)"
 	depends on BFIN_MAC && EXPERIMENTAL
-	default n
+	default y if BFIN527_EZKIT
+	default n if BFIN537_STAMP
 	help
 	  Use Reduced PHY MII Interface
 
@@ -1199,7 +1200,7 @@
 
 config IBMLANA
 	tristate "IBM LAN Adapter/A support"
-	depends on MCA && MCA_LEGACY
+	depends on MCA
 	---help---
 	  This is a Micro Channel Ethernet adapter.  You need to set
 	  CONFIG_MCA to use this driver.  It is both available as an in-kernel

diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 25b114a..0ae0d83 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c

@@ -384,7 +384,7 @@
 	/* Wait until PHY reset is complete */
 	do {
 		read_phy(lp->phy_address, MII_BMCR, &bmcr);
-	} while (!(bmcr && BMCR_RESET));
+	} while (!(bmcr & BMCR_RESET));
 
 	disable_mdi();
 	spin_unlock_irq(&lp->lock);

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 7495a9e..194949a 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c

@@ -137,11 +137,12 @@
 static void ax_reset_8390(struct net_device *dev)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
+	struct ax_device  *ax = to_ax_dev(dev);
 	unsigned long reset_start_time = jiffies;
 	void __iomem *addr = (void __iomem *)dev->base_addr;
 
 	if (ei_debug > 1)
-		printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
+		dev_dbg(&ax->dev->dev, "resetting the 8390 t=%ld\n", jiffies);
 
 	ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
 
@@ -151,7 +152,7 @@
 	/* This check _should_not_ be necessary, omit eventually. */
 	while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
 		if (jiffies - reset_start_time > 2*HZ/100) {
-			printk(KERN_WARNING "%s: %s did not complete.\n",
+			dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
 			       __FUNCTION__, dev->name);
 			break;
 		}
@@ -165,13 +166,15 @@
 			    int ring_page)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
+	struct ax_device  *ax = to_ax_dev(dev);
 	void __iomem *nic_base = ei_local->mem;
 
 	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
 	if (ei_status.dmaing) {
-		printk(KERN_EMERG "%s: DMAing conflict in %s [DMAstat:%d][irqlock:%d].\n",
+		dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
+			"[DMAstat:%d][irqlock:%d].\n",
 			dev->name, __FUNCTION__,
-		       ei_status.dmaing, ei_status.irqlock);
+			ei_status.dmaing, ei_status.irqlock);
 		return;
 	}
 
@@ -204,13 +207,16 @@
 			   struct sk_buff *skb, int ring_offset)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
+	struct ax_device  *ax = to_ax_dev(dev);
 	void __iomem *nic_base = ei_local->mem;
 	char *buf = skb->data;
 
 	if (ei_status.dmaing) {
-		printk(KERN_EMERG "%s: DMAing conflict in ax_block_input "
+		dev_err(&ax->dev->dev,
+			"%s: DMAing conflict in %s "
 			"[DMAstat:%d][irqlock:%d].\n",
-			dev->name, ei_status.dmaing, ei_status.irqlock);
+			dev->name, __FUNCTION__,
+			ei_status.dmaing, ei_status.irqlock);
 		return;
 	}
 
@@ -239,6 +245,7 @@
 			    const unsigned char *buf, const int start_page)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
+	struct ax_device  *ax = to_ax_dev(dev);
 	void __iomem *nic_base = ei_local->mem;
 	unsigned long dma_start;
 
@@ -251,7 +258,7 @@
 
 	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
 	if (ei_status.dmaing) {
-		printk(KERN_EMERG "%s: DMAing conflict in %s."
+		dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
 			"[DMAstat:%d][irqlock:%d]\n",
 			dev->name, __FUNCTION__,
 		       ei_status.dmaing, ei_status.irqlock);
@@ -281,7 +288,8 @@
 
 	while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
 		if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
-			printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
+			dev_warn(&ax->dev->dev,
+				 "%s: timeout waiting for Tx RDC.\n", dev->name);
 			ax_reset_8390(dev);
 			ax_NS8390_init(dev,1);
 			break;
@@ -424,10 +432,11 @@
 ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
 {
 	struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
+	struct ax_device  *ax = to_ax_dev(dev);
 	unsigned long flags;
 
-	printk(KERN_DEBUG "%s: %p, %04x, %04x %04x\n",
-	       __FUNCTION__, dev, phy_addr, reg, value);
+	dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
+		__FUNCTION__, dev, phy_addr, reg, value);
 
       	spin_lock_irqsave(&ei->page_lock, flags);
 
@@ -750,14 +759,11 @@
 	ax_NS8390_init(dev, 0);
 
 	if (first_init) {
-		printk("AX88796: %dbit, irq %d, %lx, MAC: ",
-		       ei_status.word16 ? 16:8, dev->irq, dev->base_addr);
+		DECLARE_MAC_BUF(mac);
 
-		for (i = 0; i < ETHER_ADDR_LEN; i++)
-			printk("%2.2x%c", dev->dev_addr[i],
-			       (i < (ETHER_ADDR_LEN-1) ? ':' : ' '));
-
-		printk("\n");
+		dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %s\n",
+			 ei_status.word16 ? 16:8, dev->irq, dev->base_addr,
+			 print_mac(mac, dev->dev_addr));
 	}
 
 	ret = register_netdev(dev);

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index eb97175..c993a32 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c

@@ -1,34 +1,11 @@
 /*
- * File:	drivers/net/bfin_mac.c
- * Based on:
- * Maintainer:
- * 		Bryan Wu <bryan.wu@analog.com>
+ * Blackfin On-Chip MAC Driver
  *
- * Original author:
- * 		Luke Yang <luke.yang@analog.com>
+ * Copyright 2004-2007 Analog Devices Inc.
  *
- * Created:
- * Description:
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * Modified:
- *		Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:	Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software ;  you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ;  either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ;  without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program ;  see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/init.h>
@@ -65,7 +42,7 @@
 #define DRV_NAME	"bfin_mac"
 #define DRV_VERSION	"1.1"
 #define DRV_AUTHOR	"Bryan Wu, Luke Yang"
-#define DRV_DESC	"Blackfin BF53[67] on-chip Ethernet MAC driver"
+#define DRV_DESC	"Blackfin BF53[67] BF527 on-chip Ethernet MAC driver"
 
 MODULE_AUTHOR(DRV_AUTHOR);
 MODULE_LICENSE("GPL");
@@ -296,7 +273,7 @@
 
 	/* poll the STABUSY bit */
 	while ((bfin_read_EMAC_STAADD()) & STABUSY) {
-		mdelay(10);
+		udelay(1);
 		if (timeout_cnt-- < 0) {
 			printk(KERN_ERR DRV_NAME
 			": wait MDC/MDIO transaction to complete timeout\n");
@@ -412,20 +389,26 @@
 	spin_unlock_irqrestore(&lp->lock, flags);
 }
 
+/* MDC  = 2.5 MHz */
+#define MDC_CLK 2500000
+
 static int mii_probe(struct net_device *dev)
 {
 	struct bf537mac_local *lp = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
 	unsigned short sysctl;
 	int i;
+	u32 sclk, mdc_div;
 
 	/* Enable PHY output early */
 	if (!(bfin_read_VR_CTL() & PHYCLKOE))
 		bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
 
-	/* MDC  = 2.5 MHz */
+	sclk = get_sclk();
+	mdc_div = ((sclk / MDC_CLK) / 2) - 1;
+
 	sysctl = bfin_read_EMAC_SYSCTL();
-	sysctl |= SET_MDCDIV(24);
+	sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
 	bfin_write_EMAC_SYSCTL(sysctl);
 
 	/* search for connect PHY device */
@@ -477,8 +460,10 @@
 	lp->phydev = phydev;
 
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d)\n",
-	       DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
+	       "@sclk=%dMHz)\n",
+	       DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq,
+	       MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
 }
@@ -551,7 +536,7 @@
 	 */
 	if (current_tx_ptr->next->next == tx_list_head) {
 		while (tx_list_head->status.status_word == 0) {
-			mdelay(10);
+			mdelay(1);
 			if (tx_list_head->status.status_word != 0
 			    || !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) {
 				goto adjust_head;
@@ -666,6 +651,12 @@
 	current_rx_ptr->skb = new_skb;
 	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
 
+	/* Invidate the data cache of skb->data range when it is write back
+	 * cache. It will prevent overwritting the new data from DMA
+	 */
+	blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+					 (unsigned long)new_skb->end);
+
 	len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
 	skb_put(skb, len);
 	blackfin_dcache_invalidate_range((unsigned long)skb->head,
@@ -767,7 +758,7 @@
 
 #if defined(CONFIG_BFIN_MAC_RMII)
 	opmode |= RMII; /* For Now only 100MBit are supported */
-#ifdef CONFIG_BF_REV_0_2
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
 	opmode |= TE;
 #endif
 #endif
@@ -792,6 +783,39 @@
 	netif_wake_queue(dev);
 }
 
+static void bf537mac_multicast_hash(struct net_device *dev)
+{
+	u32 emac_hashhi, emac_hashlo;
+	struct dev_mc_list *dmi = dev->mc_list;
+	char *addrs;
+	int i;
+	u32 crc;
+
+	emac_hashhi = emac_hashlo = 0;
+
+	for (i = 0; i < dev->mc_count; i++) {
+		addrs = dmi->dmi_addr;
+		dmi = dmi->next;
+
+		/* skip non-multicast addresses */
+		if (!(*addrs & 1))
+			continue;
+
+		crc = ether_crc(ETH_ALEN, addrs);
+		crc >>= 26;
+
+		if (crc & 0x20)
+			emac_hashhi |= 1 << (crc & 0x1f);
+		else
+			emac_hashlo |= 1 << (crc & 0x1f);
+	}
+
+	bfin_write_EMAC_HASHHI(emac_hashhi);
+	bfin_write_EMAC_HASHLO(emac_hashlo);
+
+	return;
+}
+
 /*
  * This routine will, depending on the values passed to it,
  * either make it accept multicast packets, go into
@@ -807,11 +831,17 @@
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= RAF;
 		bfin_write_EMAC_OPMODE(sysctl);
-	} else if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
+	} else if (dev->flags & IFF_ALLMULTI) {
 		/* accept all multicast */
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= PAM;
 		bfin_write_EMAC_OPMODE(sysctl);
+	} else if (dev->mc_count) {
+		/* set up multicast hash table */
+		sysctl = bfin_read_EMAC_OPMODE();
+		sysctl |= HM;
+		bfin_write_EMAC_OPMODE(sysctl);
+		bf537mac_multicast_hash(dev);
 	} else {
 		/* clear promisc or multicast mode */
 		sysctl = bfin_read_EMAC_OPMODE();
@@ -860,10 +890,10 @@
 		return retval;
 
 	phy_start(lp->phydev);
+	phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
 	setup_system_regs(dev);
 	bf537mac_disable();
 	bf537mac_enable();
-
 	pr_debug("hardware init finished\n");
 	netif_start_queue(dev);
 	netif_carrier_on(dev);
@@ -886,6 +916,7 @@
 	netif_carrier_off(dev);
 
 	phy_stop(lp->phydev);
+	phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
 
 	/* clear everything */
 	bf537mac_shutdown(dev);
@@ -970,7 +1001,7 @@
 	/* register irq handler */
 	if (request_irq
 	    (IRQ_MAC_RX, bf537mac_interrupt, IRQF_DISABLED | IRQF_SHARED,
-	     "BFIN537_MAC_RX", dev)) {
+	     "EMAC_RX", dev)) {
 		printk(KERN_WARNING DRV_NAME
 		       ": Unable to attach BlackFin MAC RX interrupt\n");
 		return -EBUSY;

diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 5970ea7..f774d5a 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h

@@ -1,34 +1,11 @@
 /*
- * File:	drivers/net/bfin_mac.c
- * Based on:
- * Maintainer:
- * 		Bryan Wu <bryan.wu@analog.com>
+ * Blackfin On-Chip MAC Driver
  *
- * Original author:
- * 		Luke Yang <luke.yang@analog.com>
+ * Copyright 2004-2007 Analog Devices Inc.
  *
- * Created:
- * Description:
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * Modified:
- *		Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:	Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software ;  you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ;  either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ;  without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program ;  see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #define BFIN_MAC_CSUM_OFFLOAD

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2039f78..0942d82 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c

@@ -1464,10 +1464,12 @@
 			dev_set_allmulti(slave_dev, 1);
 		}
 
+		netif_tx_lock_bh(bond_dev);
 		/* upload master's mc_list to new slave */
 		for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
 			dev_mc_add (slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
 		}
+		netif_tx_unlock_bh(bond_dev);
 	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
@@ -1821,7 +1823,9 @@
 		}
 
 		/* flush master's mc_list from slave */
+		netif_tx_lock_bh(bond_dev);
 		bond_mc_list_flush(bond_dev, slave_dev);
+		netif_tx_unlock_bh(bond_dev);
 	}
 
 	netdev_set_master(slave_dev, NULL);
@@ -1942,7 +1946,9 @@
 			}
 
 			/* flush master's mc_list from slave */
+			netif_tx_lock_bh(bond_dev);
 			bond_mc_list_flush(bond_dev, slave_dev);
+			netif_tx_unlock_bh(bond_dev);
 		}
 
 		netdev_set_master(slave_dev, NULL);
@@ -2795,14 +2801,11 @@
 	}
 
 	if (do_failover) {
-		rtnl_lock();
 		write_lock_bh(&bond->curr_slave_lock);
 
 		bond_select_active_slave(bond);
 
 		write_unlock_bh(&bond->curr_slave_lock);
-		rtnl_unlock();
-
 	}
 
 re_arm:
@@ -2859,8 +2862,6 @@
 
 				slave->link = BOND_LINK_UP;
 
-				rtnl_lock();
-
 				write_lock_bh(&bond->curr_slave_lock);
 
 				if ((!bond->curr_active_slave) &&
@@ -2896,7 +2897,6 @@
 				}
 
 				write_unlock_bh(&bond->curr_slave_lock);
-				rtnl_unlock();
 			}
 		} else {
 			read_lock(&bond->curr_slave_lock);
@@ -2966,7 +2966,6 @@
 			       bond->dev->name,
 			       slave->dev->name);
 
-			rtnl_lock();
 			write_lock_bh(&bond->curr_slave_lock);
 
 			bond_select_active_slave(bond);
@@ -2974,8 +2973,6 @@
 
 			write_unlock_bh(&bond->curr_slave_lock);
 
-			rtnl_unlock();
-
 			bond->current_arp_slave = slave;
 
 			if (slave) {
@@ -2993,13 +2990,10 @@
 			       bond->primary_slave->dev->name);
 
 			/* primary is up so switch to it */
-			rtnl_lock();
 			write_lock_bh(&bond->curr_slave_lock);
 			bond_change_active_slave(bond, bond->primary_slave);
 			write_unlock_bh(&bond->curr_slave_lock);
 
-			rtnl_unlock();
-
 			slave = bond->primary_slave;
 			slave->jiffies = jiffies;
 		} else {
@@ -3769,42 +3763,45 @@
 {
 	struct bonding *bond = bond_dev->priv;
 	struct net_device_stats *stats = &(bond->stats), *sstats;
+	struct net_device_stats local_stats;
 	struct slave *slave;
 	int i;
 
-	memset(stats, 0, sizeof(struct net_device_stats));
+	memset(&local_stats, 0, sizeof(struct net_device_stats));
 
 	read_lock_bh(&bond->lock);
 
 	bond_for_each_slave(bond, slave, i) {
 		sstats = slave->dev->get_stats(slave->dev);
-		stats->rx_packets += sstats->rx_packets;
-		stats->rx_bytes += sstats->rx_bytes;
-		stats->rx_errors += sstats->rx_errors;
-		stats->rx_dropped += sstats->rx_dropped;
+		local_stats.rx_packets += sstats->rx_packets;
+		local_stats.rx_bytes += sstats->rx_bytes;
+		local_stats.rx_errors += sstats->rx_errors;
+		local_stats.rx_dropped += sstats->rx_dropped;
 
-		stats->tx_packets += sstats->tx_packets;
-		stats->tx_bytes += sstats->tx_bytes;
-		stats->tx_errors += sstats->tx_errors;
-		stats->tx_dropped += sstats->tx_dropped;
+		local_stats.tx_packets += sstats->tx_packets;
+		local_stats.tx_bytes += sstats->tx_bytes;
+		local_stats.tx_errors += sstats->tx_errors;
+		local_stats.tx_dropped += sstats->tx_dropped;
 
-		stats->multicast += sstats->multicast;
-		stats->collisions += sstats->collisions;
+		local_stats.multicast += sstats->multicast;
+		local_stats.collisions += sstats->collisions;
 
-		stats->rx_length_errors += sstats->rx_length_errors;
-		stats->rx_over_errors += sstats->rx_over_errors;
-		stats->rx_crc_errors += sstats->rx_crc_errors;
-		stats->rx_frame_errors += sstats->rx_frame_errors;
-		stats->rx_fifo_errors += sstats->rx_fifo_errors;
-		stats->rx_missed_errors += sstats->rx_missed_errors;
+		local_stats.rx_length_errors += sstats->rx_length_errors;
+		local_stats.rx_over_errors += sstats->rx_over_errors;
+		local_stats.rx_crc_errors += sstats->rx_crc_errors;
+		local_stats.rx_frame_errors += sstats->rx_frame_errors;
+		local_stats.rx_fifo_errors += sstats->rx_fifo_errors;
+		local_stats.rx_missed_errors += sstats->rx_missed_errors;
 
-		stats->tx_aborted_errors += sstats->tx_aborted_errors;
-		stats->tx_carrier_errors += sstats->tx_carrier_errors;
-		stats->tx_fifo_errors += sstats->tx_fifo_errors;
-		stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors;
-		stats->tx_window_errors += sstats->tx_window_errors;
+		local_stats.tx_aborted_errors += sstats->tx_aborted_errors;
+		local_stats.tx_carrier_errors += sstats->tx_carrier_errors;
+		local_stats.tx_fifo_errors += sstats->tx_fifo_errors;
+		local_stats.tx_heartbeat_errors += sstats->tx_heartbeat_errors;
+		local_stats.tx_window_errors += sstats->tx_window_errors;
 	}
 
+	memcpy(stats, &local_stats, sizeof(struct net_device_stats));
+
 	read_unlock_bh(&bond->lock);
 
 	return stats;
@@ -3937,8 +3934,6 @@
 	struct bonding *bond = bond_dev->priv;
 	struct dev_mc_list *dmi;
 
-	write_lock_bh(&bond->lock);
-
 	/*
 	 * Do promisc before checking multicast_mode
 	 */
@@ -3959,6 +3954,8 @@
 		bond_set_allmulti(bond, -1);
 	}
 
+	read_lock(&bond->lock);
+
 	bond->flags = bond_dev->flags;
 
 	/* looking for addresses to add to slaves' mc list */
@@ -3979,7 +3976,7 @@
 	bond_mc_list_destroy(bond);
 	bond_mc_list_copy(bond_dev->mc_list, bond, GFP_ATOMIC);
 
-	write_unlock_bh(&bond->lock);
+	read_unlock(&bond->lock);
 }
 
 /*
@@ -4526,7 +4523,9 @@
 		struct net_device *bond_dev = bond->dev;
 
 		bond_work_cancel_all(bond);
+		netif_tx_lock_bh(bond_dev);
 		bond_mc_list_destroy(bond);
+		netif_tx_unlock_bh(bond_dev);
 		/* Release the bonded slaves */
 		bond_release_all(bond_dev);
 		bond_deinit(bond_dev);
@@ -4549,14 +4548,19 @@
 int bond_parse_parm(const char *buf, struct bond_parm_tbl *tbl)
 {
 	int mode = -1, i, rv;
-	char modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
+	char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
 
-	rv = sscanf(buf, "%d", &mode);
-	if (!rv) {
+	for (p = (char *)buf; *p; p++)
+		if (!(isdigit(*p) || isspace(*p)))
+			break;
+
+	if (*p)
 		rv = sscanf(buf, "%20s", modestr);
-		if (!rv)
-			return -1;
-	}
+	else
+		rv = sscanf(buf, "%d", &mode);
+
+	if (!rv)
+		return -1;
 
 	for (i = 0; tbl[i].modename; i++) {
 		if (mode == tbl[i].mode)
@@ -4883,14 +4887,16 @@
 	down_write(&bonding_rwsem);
 
 	/* Check to see if the bond already exists. */
-	list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
-		if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
-			printk(KERN_ERR DRV_NAME
+	if (name) {
+		list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list)
+			if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
+				printk(KERN_ERR DRV_NAME
 			       ": cannot add bond %s; it already exists\n",
-			       name);
-			res = -EPERM;
-			goto out_rtnl;
-		}
+				       name);
+				res = -EPERM;
+				goto out_rtnl;
+			}
+	}
 
 	bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
 				ether_setup);

diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6d83be4..67ccad6 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h

@@ -22,8 +22,8 @@
 #include "bond_3ad.h"
 #include "bond_alb.h"
 
-#define DRV_VERSION	"3.2.3"
-#define DRV_RELDATE	"December 6, 2007"
+#define DRV_VERSION	"3.2.4"
+#define DRV_RELDATE	"January 28, 2008"
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
 

diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c
index 84c1ffa..4c4d6e8 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/cxgb3/mc5.c

@@ -452,7 +452,7 @@
 	t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
 }
 
-void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
+void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
 {
 #define K * 1024
 

diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index cb684d3..9ca8c66 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c

@@ -2836,7 +2836,7 @@
  *	defaults for the assorted SGE parameters, which admins can change until
  *	they are used to initialize the SGE.
  */
-void __devinit t3_sge_prep(struct adapter *adap, struct sge_params *p)
+void t3_sge_prep(struct adapter *adap, struct sge_params *p)
 {
 	int i;
 

diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 7469935..a99496a 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c

@@ -2675,7 +2675,7 @@
 		     V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size));
 }
 
-static void __devinit init_mtus(unsigned short mtus[])
+static void init_mtus(unsigned short mtus[])
 {
 	/*
 	 * See draft-mathis-plpmtud-00.txt for the values.  The min is 88 so
@@ -2703,7 +2703,7 @@
 /*
  * Initial congestion control parameters.
  */
-static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
+static void init_cong_ctrl(unsigned short *a, unsigned short *b)
 {
 	a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
 	a[9] = 2;
@@ -3354,8 +3354,7 @@
  *	Determines a card's PCI mode and associated parameters, such as speed
  *	and width.
  */
-static void __devinit get_pci_mode(struct adapter *adapter,
-				   struct pci_params *p)
+static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
 {
 	static unsigned short speed_map[] = { 33, 66, 100, 133 };
 	u32 pci_mode, pcie_cap;
@@ -3395,8 +3394,7 @@
  *	capabilities and default speed/duplex/flow-control/autonegotiation
  *	settings.
  */
-static void __devinit init_link_config(struct link_config *lc,
-				       unsigned int caps)
+static void init_link_config(struct link_config *lc, unsigned int caps)
 {
 	lc->supported = caps;
 	lc->requested_speed = lc->speed = SPEED_INVALID;
@@ -3419,7 +3417,7 @@
  *	Calculates the size of an MC7 memory in bytes from the value of its
  *	configuration register.
  */
-static unsigned int __devinit mc7_calc_size(u32 cfg)
+static unsigned int mc7_calc_size(u32 cfg)
 {
 	unsigned int width = G_WIDTH(cfg);
 	unsigned int banks = !!(cfg & F_BKS) + 1;
@@ -3430,8 +3428,8 @@
 	return MBs << 20;
 }
 
-static void __devinit mc7_prep(struct adapter *adapter, struct mc7 *mc7,
-			       unsigned int base_addr, const char *name)
+static void mc7_prep(struct adapter *adapter, struct mc7 *mc7,
+		     unsigned int base_addr, const char *name)
 {
 	u32 cfg;
 
@@ -3517,7 +3515,7 @@
 	return 0;
 }
 
-static int __devinit init_parity(struct adapter *adap)
+static int init_parity(struct adapter *adap)
 {
 		int i, err, addr;
 
@@ -3552,8 +3550,8 @@
  * for some adapter tunables, take PHYs out of reset, and initialize the MDIO
  * interface.
  */
-int __devinit t3_prep_adapter(struct adapter *adapter,
-			      const struct adapter_info *ai, int reset)
+int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
+		    int reset)
 {
 	int ret;
 	unsigned int i, j = 0;

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 51cf577..36ba6dc 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c

@@ -94,7 +94,7 @@
  * 	enabled.  82557 pads with 7Eh, while the later controllers pad
  * 	with 00h.
  *
- *	IV.  Recieve
+ *	IV.  Receive
  *
  *	The Receive Frame Area (RFA) comprises a ring of Receive Frame
  *	Descriptors (RFD) + data buffer, thus forming the simplified mode
@@ -120,7 +120,7 @@
  *	and Rx indication and re-allocation happen in the same context,
  *	therefore no locking is required.  A software-generated interrupt
  *	is generated from the watchdog to recover from a failed allocation
- *	senario where all Rx resources have been indicated and none re-
+ *	scenario where all Rx resources have been indicated and none re-
  *	placed.
  *
  *	V.   Miscellaneous
@@ -954,7 +954,7 @@
 	/* Quadwords to DMA into FIFO before starting frame transmit */
 	nic->tx_threshold = 0xE0;
 
-	/* no interrupt for every tx completion, delay = 256us if not 557*/
+	/* no interrupt for every tx completion, delay = 256us if not 557 */
 	nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
 		((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
 
@@ -1497,7 +1497,7 @@
 		&s->complete;
 
 	/* Device's stats reporting may take several microseconds to
-	 * complete, so where always waiting for results of the
+	 * complete, so we're always waiting for results of the
 	 * previous command. */
 
 	if(*complete == cpu_to_le32(cuc_dump_reset_complete)) {
@@ -1958,7 +1958,7 @@
 
 	if(restart_required) {
 		// ack the rnr?
-		writeb(stat_ack_rnr, &nic->csr->scb.stat_ack);
+		iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
 		e100_start_receiver(nic, nic->rx_to_clean);
 		if(work_done)
 			(*work_done)++;
@@ -2774,7 +2774,7 @@
 		struct nic *nic = netdev_priv(netdev);
 		unregister_netdev(netdev);
 		e100_free(nic);
-		iounmap(nic->csr);
+		pci_iounmap(pdev, nic->csr);
 		free_netdev(netdev);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
@@ -2858,17 +2858,17 @@
 /**
  * e100_io_error_detected - called when PCI error is detected.
  * @pdev: Pointer to PCI device
- * @state: The current pci conneection state
+ * @state: The current pci connection state
  */
 static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
-	/* Similar to calling e100_down(), but avoids adpater I/O. */
+	/* Similar to calling e100_down(), but avoids adapter I/O. */
 	netdev->stop(netdev);
 
-	/* Detach; put netif into state similar to hotplug unplug. */
+	/* Detach; put netif into a state similar to hotplug unplug. */
 	napi_enable(&nic->napi);
 	netif_device_detach(netdev);
 	pci_disable_device(pdev);

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 8c87940..7c5b05a 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c

@@ -853,7 +853,7 @@
 /**
  *  Dump the eeprom for users having checksum issues
  **/
-void e1000_dump_eeprom(struct e1000_adapter *adapter)
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct ethtool_eeprom eeprom;

diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f2175ea..6232c3e 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h

@@ -63,6 +63,7 @@
 #define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
 #define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
 
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */

diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 6d9c27f..f77a742 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c

@@ -690,8 +690,8 @@
 	return err;
 }
 
-bool reg_pattern_test_array(struct e1000_adapter *adapter, u64 *data,
-			    int reg, int offset, u32 mask, u32 write)
+static bool reg_pattern_test_array(struct e1000_adapter *adapter, u64 *data,
+				   int reg, int offset, u32 mask, u32 write)
 {
 	int i;
 	u32 read;
@@ -1632,7 +1632,8 @@
 		return;
 
 	wol->supported = WAKE_UCAST | WAKE_MCAST |
-			 WAKE_BCAST | WAKE_MAGIC;
+	                 WAKE_BCAST | WAKE_MAGIC |
+	                 WAKE_PHY | WAKE_ARP;
 
 	/* apply any specific unsupported masks here */
 	if (adapter->flags & FLAG_NO_WAKE_UCAST) {
@@ -1651,6 +1652,10 @@
 		wol->wolopts |= WAKE_BCAST;
 	if (adapter->wol & E1000_WUFC_MAG)
 		wol->wolopts |= WAKE_MAGIC;
+	if (adapter->wol & E1000_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
+	if (adapter->wol & E1000_WUFC_ARP)
+		wol->wolopts |= WAKE_ARP;
 }
 
 static int e1000_set_wol(struct net_device *netdev,
@@ -1658,7 +1663,7 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+	if (wol->wolopts & WAKE_MAGICSECURE)
 		return -EOPNOTSUPP;
 
 	if (!(adapter->flags & FLAG_HAS_WOL))
@@ -1675,6 +1680,10 @@
 		adapter->wol |= E1000_WUFC_BC;
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= E1000_WUFC_LNKC;
+	if (wol->wolopts & WAKE_ARP)
+		adapter->wol |= E1000_WUFC_ARP;
 
 	return 0;
 }

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0a2cb79..f58f017 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c

@@ -945,11 +945,7 @@
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	err = pci_enable_msi(adapter->pdev);
-	if (err) {
-		ndev_warn(netdev,
-		 "Unable to allocate MSI interrupt Error: %d\n", err);
-	} else {
+	if (!pci_enable_msi(adapter->pdev)) {
 		adapter->flags |= FLAG_MSI_ENABLED;
 		handler = e1000_intr_msi;
 		irq_flags = 0;
@@ -958,10 +954,12 @@
 	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
 			  netdev);
 	if (err) {
+		ndev_err(netdev,
+		       "Unable to allocate %s interrupt (return: %d)\n",
+			adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
+			err);
 		if (adapter->flags & FLAG_MSI_ENABLED)
 			pci_disable_msi(adapter->pdev);
-		ndev_err(netdev,
-		       "Unable to allocate interrupt Error: %d\n", err);
 	}
 
 	return err;

diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index d5459a8..2eb82ab 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c

@@ -9,7 +9,7 @@
  * Many modifications, and currently maintained, by
  *  Philip Blundell <philb@gnu.org>
  * Added the Compaq LTE  Alan Cox <alan@redhat.com>
- * Added MCA support Adam Fritzler <mid@auk.cx>
+ * Added MCA support Adam Fritzler
  *
  * Note - this driver is experimental still - it has problems on faster
  * machines. Someone needs to sit down and go through it line by line with

diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5f82a46..88fb53e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h

@@ -458,4 +458,7 @@
 int ehea_sense_port_attr(struct ehea_port *port);
 int ehea_set_portspeed(struct ehea_port *port, u32 port_speed);
 
+extern u64 ehea_driver_flags;
+extern struct work_struct ehea_rereg_mr_task;
+
 #endif	/* __EHEA_H__ */

diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 679f40e..d768852 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c

@@ -40,7 +40,7 @@
 		return ret;
 
 	if (netif_carrier_ok(dev)) {
-		switch(port->port_speed) {
+		switch (port->port_speed) {
 		case EHEA_SPEED_10M: cmd->speed = SPEED_10; break;
 		case EHEA_SPEED_100M: cmd->speed = SPEED_100; break;
 		case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break;
@@ -78,7 +78,7 @@
 		goto doit;
 	}
 
-	switch(cmd->speed) {
+	switch (cmd->speed) {
 	case SPEED_10:
 		if (cmd->duplex == DUPLEX_FULL)
 			sp = H_SPEED_10M_F;

diff --git a/drivers/net/ehea/ehea_hw.h b/drivers/net/ehea/ehea_hw.h
index 1af7ca4..567981b 100644
--- a/drivers/net/ehea/ehea_hw.h
+++ b/drivers/net/ehea/ehea_hw.h

@@ -29,10 +29,10 @@
 #ifndef __EHEA_HW_H__
 #define __EHEA_HW_H__
 
-#define QPX_SQA_VALUE   EHEA_BMASK_IBM(48,63)
-#define QPX_RQ1A_VALUE  EHEA_BMASK_IBM(48,63)
-#define QPX_RQ2A_VALUE  EHEA_BMASK_IBM(48,63)
-#define QPX_RQ3A_VALUE  EHEA_BMASK_IBM(48,63)
+#define QPX_SQA_VALUE   EHEA_BMASK_IBM(48, 63)
+#define QPX_RQ1A_VALUE  EHEA_BMASK_IBM(48, 63)
+#define QPX_RQ2A_VALUE  EHEA_BMASK_IBM(48, 63)
+#define QPX_RQ3A_VALUE  EHEA_BMASK_IBM(48, 63)
 
 #define QPTEMM_OFFSET(x) offsetof(struct ehea_qptemm, x)
 

diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 869e160..c051c7e 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c

@@ -6,9 +6,9 @@
  *  (C) Copyright IBM Corp. 2006
  *
  *  Authors:
- *       Christoph Raisch <raisch@de.ibm.com>
- *       Jan-Bernd Themann <themann@de.ibm.com>
- *       Thomas Klein <tklein@de.ibm.com>
+ *	 Christoph Raisch <raisch@de.ibm.com>
+ *	 Jan-Bernd Themann <themann@de.ibm.com>
+ *	 Thomas Klein <tklein@de.ibm.com>
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -54,11 +54,11 @@
 static int rq2_entries = EHEA_DEF_ENTRIES_RQ2;
 static int rq3_entries = EHEA_DEF_ENTRIES_RQ3;
 static int sq_entries = EHEA_DEF_ENTRIES_SQ;
-static int use_mcs = 0;
-static int use_lro = 0;
+static int use_mcs;
+static int use_lro;
 static int lro_max_aggr = EHEA_LRO_MAX_AGGR;
 static int num_tx_qps = EHEA_NUM_TX_QP;
-static int prop_carrier_state = 0;
+static int prop_carrier_state;
 
 module_param(msg_level, int, 0);
 module_param(rq1_entries, int, 0);
@@ -94,9 +94,9 @@
 MODULE_PARM_DESC(use_lro, " Large Receive Offload, 1: enable, 0: disable, "
 		 "Default = 0");
 
-static int port_name_cnt = 0;
+static int port_name_cnt;
 static LIST_HEAD(adapter_list);
-u64 ehea_driver_flags = 0;
+u64 ehea_driver_flags;
 struct work_struct ehea_rereg_mr_task;
 
 struct semaphore dlpar_mem_lock;
@@ -121,12 +121,13 @@
 	.remove = ehea_remove,
 };
 
-void ehea_dump(void *adr, int len, char *msg) {
+void ehea_dump(void *adr, int len, char *msg)
+{
 	int x;
 	unsigned char *deb = adr;
 	for (x = 0; x < len; x += 16) {
 		printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
-			  deb, x, *((u64*)&deb[0]), *((u64*)&deb[8]));
+			  deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
 		deb += 16;
 	}
 }
@@ -518,7 +519,8 @@
 		last_wqe_index = wqe_index;
 		rmb();
 		if (!ehea_check_cqe(cqe, &rq)) {
-			if (rq == 1) {	/* LL RQ1 */
+			if (rq == 1) {
+				/* LL RQ1 */
 				skb = get_skb_by_index_ll(skb_arr_rq1,
 							  skb_arr_rq1_len,
 							  wqe_index);
@@ -531,10 +533,11 @@
 					if (!skb)
 						break;
 				}
-				skb_copy_to_linear_data(skb, ((char*)cqe) + 64,
+				skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
 						 cqe->num_bytes_transfered - 4);
 				ehea_fill_skb(dev, skb, cqe);
-			} else if (rq == 2) {  /* RQ2 */
+			} else if (rq == 2) {
+				/* RQ2 */
 				skb = get_skb_by_index(skb_arr_rq2,
 						       skb_arr_rq2_len, cqe);
 				if (unlikely(!skb)) {
@@ -544,7 +547,8 @@
 				}
 				ehea_fill_skb(dev, skb, cqe);
 				processed_rq2++;
-			} else {  /* RQ3 */
+			} else {
+				/* RQ3 */
 				skb = get_skb_by_index(skb_arr_rq3,
 						       skb_arr_rq3_len, cqe);
 				if (unlikely(!skb)) {
@@ -592,7 +596,7 @@
 	unsigned long flags;
 
 	cqe = ehea_poll_cq(send_cq);
-	while(cqe && (quota > 0)) {
+	while (cqe && (quota > 0)) {
 		ehea_inc_cq(send_cq);
 
 		cqe_counter++;
@@ -643,7 +647,8 @@
 
 static int ehea_poll(struct napi_struct *napi, int budget)
 {
-	struct ehea_port_res *pr = container_of(napi, struct ehea_port_res, napi);
+	struct ehea_port_res *pr = container_of(napi, struct ehea_port_res,
+						napi);
 	struct net_device *dev = pr->port->netdev;
 	struct ehea_cqe *cqe;
 	struct ehea_cqe *cqe_skb = NULL;
@@ -743,8 +748,9 @@
 	u64 hret;
 	struct hcp_ehea_port_cb0 *cb0;
 
-	cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC);   /* May be called via */
-	if (!cb0) {                             /* ehea_neq_tasklet() */
+	/* may be called via ehea_neq_tasklet() */
+	cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
+	if (!cb0) {
 		ehea_error("no mem for cb0");
 		ret = -ENOMEM;
 		goto out;
@@ -762,7 +768,7 @@
 	/* MAC address */
 	port->mac_addr = cb0->port_mac_addr << 16;
 
-	if (!is_valid_ether_addr((u8*)&port->mac_addr)) {
+	if (!is_valid_ether_addr((u8 *)&port->mac_addr)) {
 		ret = -EADDRNOTAVAIL;
 		goto out_free;
 	}
@@ -994,7 +1000,7 @@
 
 static void ehea_neq_tasklet(unsigned long data)
 {
-	struct ehea_adapter *adapter = (struct ehea_adapter*)data;
+	struct ehea_adapter *adapter = (struct ehea_adapter *)data;
 	struct ehea_eqe *eqe;
 	u64 event_mask;
 
@@ -1204,7 +1210,7 @@
 
 static int ehea_init_q_skba(struct ehea_q_skb_arr *q_skba, int max_q_entries)
 {
-	int arr_size = sizeof(void*) * max_q_entries;
+	int arr_size = sizeof(void *) * max_q_entries;
 
 	q_skba->arr = vmalloc(arr_size);
 	if (!q_skba->arr)
@@ -1489,7 +1495,7 @@
 
 	nfrags = skb_shinfo(skb)->nr_frags;
 	sg1entry = &swqe->u.immdata_desc.sg_entry;
-	sg_list = (struct ehea_vsgentry*)&swqe->u.immdata_desc.sg_list;
+	sg_list = (struct ehea_vsgentry *)&swqe->u.immdata_desc.sg_list;
 	swqe->descriptors = 0;
 	sg1entry_contains_frag_data = 0;
 
@@ -1542,7 +1548,7 @@
 				     reg_type, port->mac_addr, 0, hcallid);
 	if (hret != H_SUCCESS) {
 		ehea_error("%sregistering bc address failed (tagged)",
-                           hcallid == H_REG_BCMC ? "" : "de");
+			   hcallid == H_REG_BCMC ? "" : "de");
 		ret = -EIO;
 		goto out_herr;
 	}
@@ -1732,7 +1738,7 @@
 		}
 }
 
-static void ehea_add_multicast_entry(struct ehea_port* port, u8* mc_mac_addr)
+static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr)
 {
 	struct ehea_mc_list *ehea_mcl_entry;
 	u64 hret;
@@ -1791,11 +1797,10 @@
 			goto out;
 		}
 
-		for (i = 0, k_mcl_entry = dev->mc_list;
-		     i < dev->mc_count;
-		     i++, k_mcl_entry = k_mcl_entry->next) {
+		for (i = 0, k_mcl_entry = dev->mc_list; i < dev->mc_count; i++,
+			     k_mcl_entry = k_mcl_entry->next)
 			ehea_add_multicast_entry(port, k_mcl_entry->dmi_addr);
-		}
+
 	}
 out:
 	return;
@@ -1925,12 +1930,12 @@
 
 	if ((skb->protocol == htons(ETH_P_IP)) &&
 	    (ip_hdr(skb)->protocol == IPPROTO_TCP)) {
-		tcp = (struct tcphdr*)(skb_network_header(skb) + (ip_hdr(skb)->ihl * 4));
+		tcp = (struct tcphdr *)(skb_network_header(skb) +
+					(ip_hdr(skb)->ihl * 4));
 		tmp = (tcp->source + (tcp->dest << 16)) % 31;
 		tmp += ip_hdr(skb)->daddr % 31;
 		return tmp % num_qps;
-	}
-	else
+	} else
 		return 0;
 }
 
@@ -2122,7 +2127,7 @@
 	u64 hret;
 	u16 dummy16 = 0;
 	u64 dummy64 = 0;
-	struct hcp_modify_qp_cb0* cb0;
+	struct hcp_modify_qp_cb0 *cb0;
 
 	cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!cb0) {
@@ -2248,7 +2253,7 @@
 	int ret = 0;
 	int i;
 
-	for(i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
+	for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
 		ret |= ehea_clean_portres(port, &port->port_res[i]);
 
 	ret |= ehea_destroy_eq(port->qp_eq);
@@ -2300,7 +2305,7 @@
 		goto out_clean_pr;
 	}
 
-	for(i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+	for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
 		ret = ehea_activate_qp(port->adapter, port->port_res[i].qp);
 		if (ret) {
 			ehea_error("activate_qp failed");
@@ -2308,7 +2313,7 @@
 		}
 	}
 
-	for(i = 0; i < port->num_def_qps; i++) {
+	for (i = 0; i < port->num_def_qps; i++) {
 		ret = ehea_fill_port_res(&port->port_res[i]);
 		if (ret) {
 			ehea_error("out_free_irqs");
@@ -2425,7 +2430,7 @@
 {
 	struct ehea_port *port = netdev_priv(dev);
 	struct ehea_adapter *adapter = port->adapter;
-	struct hcp_modify_qp_cb0* cb0;
+	struct hcp_modify_qp_cb0 *cb0;
 	int ret = -EIO;
 	int dret;
 	int i;
@@ -2490,7 +2495,7 @@
 	return ret;
 }
 
-void ehea_update_rqs(struct ehea_qp *orig_qp, struct ehea_port_res * pr)
+void ehea_update_rqs(struct ehea_qp *orig_qp, struct ehea_port_res *pr)
 {
 	struct ehea_qp qp = *orig_qp;
 	struct ehea_qp_init_attr *init_attr = &qp.init_attr;
@@ -2530,7 +2535,7 @@
 	int ret = 0;
 	int i;
 
-	struct hcp_modify_qp_cb0* cb0;
+	struct hcp_modify_qp_cb0 *cb0;
 	u64 hret;
 	u64 dummy64 = 0;
 	u16 dummy16 = 0;
@@ -2804,34 +2809,6 @@
 	of_node_put(port->ofdev.node);
 }
 
-static int ehea_driver_sysfs_add(struct device *dev,
-				 struct device_driver *driver)
-{
-	int ret;
-
-	ret = sysfs_create_link(&driver->kobj, &dev->kobj,
-				kobject_name(&dev->kobj));
-	if (ret == 0) {
-		ret = sysfs_create_link(&dev->kobj, &driver->kobj,
-					"driver");
-		if (ret)
-			sysfs_remove_link(&driver->kobj,
-					  kobject_name(&dev->kobj));
-	}
-	return ret;
-}
-
-static void ehea_driver_sysfs_remove(struct device *dev,
-				     struct device_driver *driver)
-{
-	struct device_driver *drv = driver;
-
-	if (drv) {
-		sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
-		sysfs_remove_link(&dev->kobj, "driver");
-	}
-}
-
 static struct device *ehea_register_port(struct ehea_port *port,
 					 struct device_node *dn)
 {
@@ -2856,16 +2833,8 @@
 		goto out_unreg_of_dev;
 	}
 
-	ret = ehea_driver_sysfs_add(&port->ofdev.dev, &ehea_driver.driver);
-	if (ret) {
-		ehea_error("failed to register sysfs driver link");
-		goto out_rem_dev_file;
-	}
-
 	return &port->ofdev.dev;
 
-out_rem_dev_file:
-	device_remove_file(&port->ofdev.dev, &dev_attr_log_port_id);
 out_unreg_of_dev:
 	of_device_unregister(&port->ofdev);
 out:
@@ -2874,7 +2843,6 @@
 
 static void ehea_unregister_port(struct ehea_port *port)
 {
-	ehea_driver_sysfs_remove(&port->ofdev.dev, &ehea_driver.driver);
 	device_remove_file(&port->ofdev.dev, &dev_attr_log_port_id);
 	of_device_unregister(&port->ofdev);
 }
@@ -3109,7 +3077,7 @@
 	of_node_put(eth_dn);
 
 	if (port) {
-		for (i=0; i < EHEA_MAX_PORTS; i++)
+		for (i = 0; i < EHEA_MAX_PORTS; i++)
 			if (!adapter->port[i]) {
 				adapter->port[i] = port;
 				break;
@@ -3144,7 +3112,7 @@
 
 		ehea_shutdown_single_port(port);
 
-		for (i=0; i < EHEA_MAX_PORTS; i++)
+		for (i = 0; i < EHEA_MAX_PORTS; i++)
 			if (adapter->port[i] == port) {
 				adapter->port[i] = NULL;
 				break;
@@ -3313,7 +3281,7 @@
 }
 
 static struct notifier_block ehea_reboot_nb = {
-        .notifier_call = ehea_reboot_notifier,
+	.notifier_call = ehea_reboot_notifier,
 };
 
 static int check_module_parm(void)

diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c
index 95c4a7f..156eb63 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ehea/ehea_phyp.c

@@ -6,9 +6,9 @@
  *  (C) Copyright IBM Corp. 2006
  *
  *  Authors:
- *       Christoph Raisch <raisch@de.ibm.com>
- *       Jan-Bernd Themann <themann@de.ibm.com>
- *       Thomas Klein <tklein@de.ibm.com>
+ *	 Christoph Raisch <raisch@de.ibm.com>
+ *	 Jan-Bernd Themann <themann@de.ibm.com>
+ *	 Thomas Klein <tklein@de.ibm.com>
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -38,11 +38,11 @@
 }
 
 /* Defines for H_CALL H_ALLOC_RESOURCE */
-#define H_ALL_RES_TYPE_QP        1
-#define H_ALL_RES_TYPE_CQ        2
-#define H_ALL_RES_TYPE_EQ        3
-#define H_ALL_RES_TYPE_MR        5
-#define H_ALL_RES_TYPE_MW        6
+#define H_ALL_RES_TYPE_QP	 1
+#define H_ALL_RES_TYPE_CQ	 2
+#define H_ALL_RES_TYPE_EQ	 3
+#define H_ALL_RES_TYPE_MR	 5
+#define H_ALL_RES_TYPE_MW	 6
 
 static long ehea_plpar_hcall_norets(unsigned long opcode,
 				    unsigned long arg1,
@@ -137,77 +137,77 @@
 			 const u64 qp_handle, const u64 sel_mask, void *cb_addr)
 {
 	return ehea_plpar_hcall_norets(H_QUERY_HEA_QP,
-				       adapter_handle,	        /* R4 */
-				       qp_category,	        /* R5 */
-				       qp_handle,               /* R6 */
-				       sel_mask,                /* R7 */
+				       adapter_handle,		/* R4 */
+				       qp_category,		/* R5 */
+				       qp_handle,		/* R6 */
+				       sel_mask,		/* R7 */
 				       virt_to_abs(cb_addr),	/* R8 */
 				       0, 0);
 }
 
 /* input param R5 */
-#define H_ALL_RES_QP_EQPO         EHEA_BMASK_IBM(9, 11)
-#define H_ALL_RES_QP_QPP          EHEA_BMASK_IBM(12, 12)
-#define H_ALL_RES_QP_RQR          EHEA_BMASK_IBM(13, 15)
-#define H_ALL_RES_QP_EQEG         EHEA_BMASK_IBM(16, 16)
-#define H_ALL_RES_QP_LL_QP        EHEA_BMASK_IBM(17, 17)
-#define H_ALL_RES_QP_DMA128       EHEA_BMASK_IBM(19, 19)
-#define H_ALL_RES_QP_HSM          EHEA_BMASK_IBM(20, 21)
-#define H_ALL_RES_QP_SIGT         EHEA_BMASK_IBM(22, 23)
-#define H_ALL_RES_QP_TENURE       EHEA_BMASK_IBM(48, 55)
-#define H_ALL_RES_QP_RES_TYP      EHEA_BMASK_IBM(56, 63)
+#define H_ALL_RES_QP_EQPO	  EHEA_BMASK_IBM(9, 11)
+#define H_ALL_RES_QP_QPP	  EHEA_BMASK_IBM(12, 12)
+#define H_ALL_RES_QP_RQR	  EHEA_BMASK_IBM(13, 15)
+#define H_ALL_RES_QP_EQEG	  EHEA_BMASK_IBM(16, 16)
+#define H_ALL_RES_QP_LL_QP	  EHEA_BMASK_IBM(17, 17)
+#define H_ALL_RES_QP_DMA128	  EHEA_BMASK_IBM(19, 19)
+#define H_ALL_RES_QP_HSM	  EHEA_BMASK_IBM(20, 21)
+#define H_ALL_RES_QP_SIGT	  EHEA_BMASK_IBM(22, 23)
+#define H_ALL_RES_QP_TENURE	  EHEA_BMASK_IBM(48, 55)
+#define H_ALL_RES_QP_RES_TYP	  EHEA_BMASK_IBM(56, 63)
 
 /* input param R9  */
-#define H_ALL_RES_QP_TOKEN        EHEA_BMASK_IBM(0, 31)
-#define H_ALL_RES_QP_PD           EHEA_BMASK_IBM(32,63)
+#define H_ALL_RES_QP_TOKEN	  EHEA_BMASK_IBM(0, 31)
+#define H_ALL_RES_QP_PD		  EHEA_BMASK_IBM(32, 63)
 
 /* input param R10 */
-#define H_ALL_RES_QP_MAX_SWQE     EHEA_BMASK_IBM(4, 7)
-#define H_ALL_RES_QP_MAX_R1WQE    EHEA_BMASK_IBM(12, 15)
-#define H_ALL_RES_QP_MAX_R2WQE    EHEA_BMASK_IBM(20, 23)
-#define H_ALL_RES_QP_MAX_R3WQE    EHEA_BMASK_IBM(28, 31)
+#define H_ALL_RES_QP_MAX_SWQE	  EHEA_BMASK_IBM(4, 7)
+#define H_ALL_RES_QP_MAX_R1WQE	  EHEA_BMASK_IBM(12, 15)
+#define H_ALL_RES_QP_MAX_R2WQE	  EHEA_BMASK_IBM(20, 23)
+#define H_ALL_RES_QP_MAX_R3WQE	  EHEA_BMASK_IBM(28, 31)
 /* Max Send Scatter Gather Elements */
-#define H_ALL_RES_QP_MAX_SSGE     EHEA_BMASK_IBM(37, 39)
-#define H_ALL_RES_QP_MAX_R1SGE    EHEA_BMASK_IBM(45, 47)
+#define H_ALL_RES_QP_MAX_SSGE	  EHEA_BMASK_IBM(37, 39)
+#define H_ALL_RES_QP_MAX_R1SGE	  EHEA_BMASK_IBM(45, 47)
 /* Max Receive SG Elements RQ1 */
-#define H_ALL_RES_QP_MAX_R2SGE    EHEA_BMASK_IBM(53, 55)
-#define H_ALL_RES_QP_MAX_R3SGE    EHEA_BMASK_IBM(61, 63)
+#define H_ALL_RES_QP_MAX_R2SGE	  EHEA_BMASK_IBM(53, 55)
+#define H_ALL_RES_QP_MAX_R3SGE	  EHEA_BMASK_IBM(61, 63)
 
 /* input param R11 */
-#define H_ALL_RES_QP_SWQE_IDL     EHEA_BMASK_IBM(0, 7)
+#define H_ALL_RES_QP_SWQE_IDL	  EHEA_BMASK_IBM(0, 7)
 /* max swqe immediate data length */
-#define H_ALL_RES_QP_PORT_NUM     EHEA_BMASK_IBM(48, 63)
+#define H_ALL_RES_QP_PORT_NUM	  EHEA_BMASK_IBM(48, 63)
 
 /* input param R12 */
-#define H_ALL_RES_QP_TH_RQ2       EHEA_BMASK_IBM(0, 15)
+#define H_ALL_RES_QP_TH_RQ2	  EHEA_BMASK_IBM(0, 15)
 /* Threshold RQ2 */
-#define H_ALL_RES_QP_TH_RQ3       EHEA_BMASK_IBM(16, 31)
+#define H_ALL_RES_QP_TH_RQ3	  EHEA_BMASK_IBM(16, 31)
 /* Threshold RQ3 */
 
 /* output param R6 */
-#define H_ALL_RES_QP_ACT_SWQE     EHEA_BMASK_IBM(0, 15)
-#define H_ALL_RES_QP_ACT_R1WQE    EHEA_BMASK_IBM(16, 31)
-#define H_ALL_RES_QP_ACT_R2WQE    EHEA_BMASK_IBM(32, 47)
-#define H_ALL_RES_QP_ACT_R3WQE    EHEA_BMASK_IBM(48, 63)
+#define H_ALL_RES_QP_ACT_SWQE	  EHEA_BMASK_IBM(0, 15)
+#define H_ALL_RES_QP_ACT_R1WQE	  EHEA_BMASK_IBM(16, 31)
+#define H_ALL_RES_QP_ACT_R2WQE	  EHEA_BMASK_IBM(32, 47)
+#define H_ALL_RES_QP_ACT_R3WQE	  EHEA_BMASK_IBM(48, 63)
 
 /* output param, R7 */
-#define H_ALL_RES_QP_ACT_SSGE     EHEA_BMASK_IBM(0, 7)
-#define H_ALL_RES_QP_ACT_R1SGE    EHEA_BMASK_IBM(8, 15)
-#define H_ALL_RES_QP_ACT_R2SGE    EHEA_BMASK_IBM(16, 23)
-#define H_ALL_RES_QP_ACT_R3SGE    EHEA_BMASK_IBM(24, 31)
+#define H_ALL_RES_QP_ACT_SSGE	  EHEA_BMASK_IBM(0, 7)
+#define H_ALL_RES_QP_ACT_R1SGE	  EHEA_BMASK_IBM(8, 15)
+#define H_ALL_RES_QP_ACT_R2SGE	  EHEA_BMASK_IBM(16, 23)
+#define H_ALL_RES_QP_ACT_R3SGE	  EHEA_BMASK_IBM(24, 31)
 #define H_ALL_RES_QP_ACT_SWQE_IDL EHEA_BMASK_IBM(32, 39)
 
 /* output param R8,R9 */
-#define H_ALL_RES_QP_SIZE_SQ      EHEA_BMASK_IBM(0, 31)
-#define H_ALL_RES_QP_SIZE_RQ1     EHEA_BMASK_IBM(32, 63)
-#define H_ALL_RES_QP_SIZE_RQ2     EHEA_BMASK_IBM(0, 31)
-#define H_ALL_RES_QP_SIZE_RQ3     EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_QP_SIZE_SQ	  EHEA_BMASK_IBM(0, 31)
+#define H_ALL_RES_QP_SIZE_RQ1	  EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_QP_SIZE_RQ2	  EHEA_BMASK_IBM(0, 31)
+#define H_ALL_RES_QP_SIZE_RQ3	  EHEA_BMASK_IBM(32, 63)
 
 /* output param R11,R12 */
-#define H_ALL_RES_QP_LIOBN_SQ     EHEA_BMASK_IBM(0, 31)
-#define H_ALL_RES_QP_LIOBN_RQ1    EHEA_BMASK_IBM(32, 63)
-#define H_ALL_RES_QP_LIOBN_RQ2    EHEA_BMASK_IBM(0, 31)
-#define H_ALL_RES_QP_LIOBN_RQ3    EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_QP_LIOBN_SQ	  EHEA_BMASK_IBM(0, 31)
+#define H_ALL_RES_QP_LIOBN_RQ1	  EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_QP_LIOBN_RQ2	  EHEA_BMASK_IBM(0, 31)
+#define H_ALL_RES_QP_LIOBN_RQ3	  EHEA_BMASK_IBM(32, 63)
 
 u64 ehea_h_alloc_resource_qp(const u64 adapter_handle,
 			     struct ehea_qp_init_attr *init_attr, const u32 pd,
@@ -334,28 +334,28 @@
 }
 
 /* Defines for H_CALL H_ALLOC_RESOURCE */
-#define H_ALL_RES_TYPE_QP        1
-#define H_ALL_RES_TYPE_CQ        2
-#define H_ALL_RES_TYPE_EQ        3
-#define H_ALL_RES_TYPE_MR        5
-#define H_ALL_RES_TYPE_MW        6
+#define H_ALL_RES_TYPE_QP	 1
+#define H_ALL_RES_TYPE_CQ	 2
+#define H_ALL_RES_TYPE_EQ	 3
+#define H_ALL_RES_TYPE_MR	 5
+#define H_ALL_RES_TYPE_MW	 6
 
 /*  input param R5 */
-#define H_ALL_RES_EQ_NEQ             EHEA_BMASK_IBM(0, 0)
+#define H_ALL_RES_EQ_NEQ	     EHEA_BMASK_IBM(0, 0)
 #define H_ALL_RES_EQ_NON_NEQ_ISN     EHEA_BMASK_IBM(6, 7)
 #define H_ALL_RES_EQ_INH_EQE_GEN     EHEA_BMASK_IBM(16, 16)
-#define H_ALL_RES_EQ_RES_TYPE        EHEA_BMASK_IBM(56, 63)
+#define H_ALL_RES_EQ_RES_TYPE	     EHEA_BMASK_IBM(56, 63)
 /*  input param R6 */
-#define H_ALL_RES_EQ_MAX_EQE         EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_EQ_MAX_EQE	     EHEA_BMASK_IBM(32, 63)
 
 /*  output param R6 */
-#define H_ALL_RES_EQ_LIOBN           EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_EQ_LIOBN	     EHEA_BMASK_IBM(32, 63)
 
 /*  output param R7 */
-#define H_ALL_RES_EQ_ACT_EQE         EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_EQ_ACT_EQE	     EHEA_BMASK_IBM(32, 63)
 
 /*  output param R8 */
-#define H_ALL_RES_EQ_ACT_PS          EHEA_BMASK_IBM(32, 63)
+#define H_ALL_RES_EQ_ACT_PS	     EHEA_BMASK_IBM(32, 63)
 
 /*  output param R9 */
 #define H_ALL_RES_EQ_ACT_EQ_IST_C    EHEA_BMASK_IBM(30, 31)
@@ -453,12 +453,12 @@
 
 	hret = ehea_plpar_hcall9(H_REGISTER_SMR,
 				 outs,
-				 adapter_handle       ,        	 /* R4 */
-				 orig_mr_handle,                 /* R5 */
-				 vaddr_in,                       /* R6 */
-				 (((u64)access_ctrl) << 32ULL),  /* R7 */
-				 pd,                             /* R8 */
-				 0, 0, 0, 0);	   		 /* R9-R12 */
+				 adapter_handle	      ,		 /* R4 */
+				 orig_mr_handle,		 /* R5 */
+				 vaddr_in,			 /* R6 */
+				 (((u64)access_ctrl) << 32ULL),	 /* R7 */
+				 pd,				 /* R8 */
+				 0, 0, 0, 0);			 /* R9-R12 */
 
 	mr->handle = outs[0];
 	mr->lkey = (u32)outs[2];
@@ -471,11 +471,11 @@
 	u64 outs[PLPAR_HCALL9_BUFSIZE];
 
 	return ehea_plpar_hcall9(H_DISABLE_AND_GET_HEA,
-       				 outs,
+				 outs,
 				 adapter_handle,		/* R4 */
 				 H_DISABLE_GET_EHEA_WQE_P,	/* R5 */
 				 qp_handle,			/* R6 */
-				 0, 0, 0, 0, 0, 0);             /* R7-R12 */
+				 0, 0, 0, 0, 0, 0);		/* R7-R12 */
 }
 
 u64 ehea_h_free_resource(const u64 adapter_handle, const u64 res_handle,
@@ -483,9 +483,9 @@
 {
 	return ehea_plpar_hcall_norets(H_FREE_RESOURCE,
 				       adapter_handle,	   /* R4 */
-				       res_handle,         /* R5 */
+				       res_handle,	   /* R5 */
 				       force_bit,
-				       0, 0, 0, 0);        /* R7-R10 */
+				       0, 0, 0, 0);	   /* R7-R10 */
 }
 
 u64 ehea_h_alloc_resource_mr(const u64 adapter_handle, const u64 vaddr,
@@ -493,13 +493,13 @@
 			     const u32 pd, u64 *mr_handle, u32 *lkey)
 {
 	u64 hret;
- 	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	u64 outs[PLPAR_HCALL9_BUFSIZE];
 
 	hret = ehea_plpar_hcall9(H_ALLOC_HEA_RESOURCE,
 				 outs,
 				 adapter_handle,		   /* R4 */
 				 5,				   /* R5 */
-				 vaddr,			           /* R6 */
+				 vaddr,				   /* R6 */
 				 length,			   /* R7 */
 				 (((u64) access_ctrl) << 32ULL),   /* R8 */
 				 pd,				   /* R9 */
@@ -619,8 +619,8 @@
 		      void *rblock)
 {
 	return ehea_plpar_hcall_norets(H_ERROR_DATA,
-				       adapter_handle,          /* R4 */
-				       ressource_handle,        /* R5 */
-				       virt_to_abs(rblock),     /* R6 */
-				       0, 0, 0, 0);             /* R7-R12 */
+				       adapter_handle,		/* R4 */
+				       ressource_handle,	/* R5 */
+				       virt_to_abs(rblock),	/* R6 */
+				       0, 0, 0, 0);		/* R7-R12 */
 }

diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h
index faa191d..f3628c8 100644
--- a/drivers/net/ehea/ehea_phyp.h
+++ b/drivers/net/ehea/ehea_phyp.h

@@ -93,7 +93,7 @@
 static inline void hcp_epas_dtor(struct h_epas *epas)
 {
 	if (epas->kernel.addr)
-		iounmap((void __iomem*)((u64)epas->kernel.addr & PAGE_MASK));
+		iounmap((void __iomem *)((u64)epas->kernel.addr & PAGE_MASK));
 
 	epas->user.addr = 0;
 	epas->kernel.addr = 0;
@@ -388,23 +388,23 @@
 			  const u64 qp_handle,
 			  const u64 sel_mask,
 			  void *cb_addr,
-			  u64 * inv_attr_id,
-			  u64 * proc_mask, u16 * out_swr, u16 * out_rwr);
+			  u64 *inv_attr_id,
+			  u64 *proc_mask, u16 *out_swr, u16 *out_rwr);
 
 u64 ehea_h_alloc_resource_eq(const u64 adapter_handle,
-			     struct ehea_eq_attr *eq_attr, u64 * eq_handle);
+			     struct ehea_eq_attr *eq_attr, u64 *eq_handle);
 
 u64 ehea_h_alloc_resource_cq(const u64 adapter_handle,
 			     struct ehea_cq_attr *cq_attr,
-			     u64 * cq_handle, struct h_epas *epas);
+			     u64 *cq_handle, struct h_epas *epas);
 
 u64 ehea_h_alloc_resource_qp(const u64 adapter_handle,
 			     struct ehea_qp_init_attr *init_attr,
 			     const u32 pd,
-			     u64 * qp_handle, struct h_epas *h_epas);
+			     u64 *qp_handle, struct h_epas *h_epas);
 
-#define H_REG_RPAGE_PAGE_SIZE          EHEA_BMASK_IBM(48,55)
-#define H_REG_RPAGE_QT                 EHEA_BMASK_IBM(62,63)
+#define H_REG_RPAGE_PAGE_SIZE          EHEA_BMASK_IBM(48, 55)
+#define H_REG_RPAGE_QT                 EHEA_BMASK_IBM(62, 63)
 
 u64 ehea_h_register_rpage(const u64 adapter_handle,
 			  const u8 pagesize,
@@ -426,7 +426,7 @@
 
 u64 ehea_h_alloc_resource_mr(const u64 adapter_handle, const u64 vaddr,
 			     const u64 length, const u32 access_ctrl,
-			     const u32 pd, u64 * mr_handle, u32 * lkey);
+			     const u32 pd, u64 *mr_handle, u32 *lkey);
 
 u64 ehea_h_register_rpage_mr(const u64 adapter_handle, const u64 mr_handle,
 			     const u8 pagesize, const u8 queue_type,
@@ -439,8 +439,8 @@
 u64 ehea_h_query_ehea(const u64 adapter_handle, void *cb_addr);
 
 /* output param R5 */
-#define H_MEHEAPORT_CAT		EHEA_BMASK_IBM(40,47)
-#define H_MEHEAPORT_PN		EHEA_BMASK_IBM(48,63)
+#define H_MEHEAPORT_CAT		EHEA_BMASK_IBM(40, 47)
+#define H_MEHEAPORT_PN		EHEA_BMASK_IBM(48, 63)
 
 u64 ehea_h_query_ehea_port(const u64 adapter_handle, const u16 port_num,
 			   const u8 cb_cat, const u64 select_mask,

diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 83b7643..d522e90 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c

@@ -33,8 +33,6 @@
 
 
 struct ehea_busmap ehea_bmap = { 0, 0, NULL };
-extern u64 ehea_driver_flags;
-extern struct work_struct ehea_rereg_mr_task;
 
 
 static void *hw_qpageit_get_inc(struct hw_queue *queue)
@@ -65,7 +63,7 @@
 	}
 
 	queue->queue_length = nr_of_pages * pagesize;
-	queue->queue_pages = kmalloc(nr_of_pages * sizeof(void*), GFP_KERNEL);
+	queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL);
 	if (!queue->queue_pages) {
 		ehea_error("no mem for queue_pages");
 		return -ENOMEM;
@@ -78,11 +76,11 @@
 	 */
 	i = 0;
 	while (i < nr_of_pages) {
-		u8 *kpage = (u8*)get_zeroed_page(GFP_KERNEL);
+		u8 *kpage = (u8 *)get_zeroed_page(GFP_KERNEL);
 		if (!kpage)
 			goto out_nomem;
 		for (k = 0; k < pages_per_kpage && i < nr_of_pages; k++) {
-			(queue->queue_pages)[i] = (struct ehea_page*)kpage;
+			(queue->queue_pages)[i] = (struct ehea_page *)kpage;
 			kpage += pagesize;
 			i++;
 		}
@@ -235,8 +233,8 @@
 		return 0;
 
 	hcp_epas_dtor(&cq->epas);
-
-	if ((hret = ehea_destroy_cq_res(cq, NORMAL_FREE)) == H_R_STATE) {
+	hret = ehea_destroy_cq_res(cq, NORMAL_FREE);
+	if (hret == H_R_STATE) {
 		ehea_error_data(cq->adapter, cq->fw_handle);
 		hret = ehea_destroy_cq_res(cq, FORCE_FREE);
 	}
@@ -301,13 +299,13 @@
 		if (i == (eq->attr.nr_pages - 1)) {
 			/* last page */
 			vpage = hw_qpageit_get_inc(&eq->hw_queue);
-			if ((hret != H_SUCCESS) || (vpage)) {
+			if ((hret != H_SUCCESS) || (vpage))
 				goto out_kill_hwq;
-			}
+
 		} else {
-			if ((hret != H_PAGE_REGISTERED) || (!vpage)) {
+			if ((hret != H_PAGE_REGISTERED) || (!vpage))
 				goto out_kill_hwq;
-			}
+
 		}
 	}
 
@@ -331,7 +329,7 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&eq->spinlock, flags);
-	eqe = (struct ehea_eqe*)hw_eqit_eq_get_inc_valid(&eq->hw_queue);
+	eqe = (struct ehea_eqe *)hw_eqit_eq_get_inc_valid(&eq->hw_queue);
 	spin_unlock_irqrestore(&eq->spinlock, flags);
 
 	return eqe;
@@ -364,7 +362,8 @@
 
 	hcp_epas_dtor(&eq->epas);
 
-	if ((hret = ehea_destroy_eq_res(eq, NORMAL_FREE)) == H_R_STATE) {
+	hret = ehea_destroy_eq_res(eq, NORMAL_FREE);
+	if (hret == H_R_STATE) {
 		ehea_error_data(eq->adapter, eq->fw_handle);
 		hret = ehea_destroy_eq_res(eq, FORCE_FREE);
 	}
@@ -546,7 +545,8 @@
 
 	hcp_epas_dtor(&qp->epas);
 
-	if ((hret = ehea_destroy_qp_res(qp, NORMAL_FREE)) == H_R_STATE) {
+	hret = ehea_destroy_qp_res(qp, NORMAL_FREE);
+	if (hret == H_R_STATE) {
 		ehea_error_data(qp->adapter, qp->fw_handle);
 		hret = ehea_destroy_qp_res(qp, FORCE_FREE);
 	}
@@ -559,7 +559,7 @@
 	return 0;
 }
 
-int ehea_create_busmap( void )
+int ehea_create_busmap(void)
 {
 	u64 vaddr = EHEA_BUSMAP_START;
 	unsigned long high_section_index = 0;
@@ -595,7 +595,7 @@
 	return 0;
 }
 
-void ehea_destroy_busmap( void )
+void ehea_destroy_busmap(void)
 {
 	vfree(ehea_bmap.vaddr);
 }

diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index bc62d38..0bb6f92 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h

@@ -41,8 +41,8 @@
 #define EHEA_SECTSIZE          (1UL << 24)
 #define EHEA_PAGES_PER_SECTION (EHEA_SECTSIZE >> EHEA_PAGESHIFT)
 
-#if (1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE
-#error eHEA module can't work if kernel sectionsize < ehea sectionsize
+#if ((1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE)
+#error eHEA module cannot work if kernel sectionsize < ehea sectionsize
 #endif
 
 /* Some abbreviations used here:
@@ -188,8 +188,8 @@
 	u64 entry;
 };
 
-#define ERROR_DATA_LENGTH  EHEA_BMASK_IBM(52,63)
-#define ERROR_DATA_TYPE    EHEA_BMASK_IBM(0,7)
+#define ERROR_DATA_LENGTH  EHEA_BMASK_IBM(52, 63)
+#define ERROR_DATA_TYPE    EHEA_BMASK_IBM(0, 7)
 
 static inline void *hw_qeit_calc(struct hw_queue *queue, u64 q_offset)
 {
@@ -279,7 +279,7 @@
 static inline void *hw_eqit_eq_get_inc_valid(struct hw_queue *queue)
 {
 	void *retvalue = hw_qeit_get(queue);
-	u32 qe = *(u8*)retvalue;
+	u32 qe = *(u8 *)retvalue;
 	if ((qe >> 7) == (queue->toggle_state & 1))
 		hw_qeit_eq_get_inc(queue);
 	else
@@ -364,7 +364,7 @@
 
 int ehea_destroy_cq(struct ehea_cq *cq);
 
-struct ehea_qp *ehea_create_qp(struct ehea_adapter * adapter, u32 pd,
+struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter, u32 pd,
 			       struct ehea_qp_init_attr *init_attr);
 
 int ehea_destroy_qp(struct ehea_qp *qp);
@@ -378,8 +378,8 @@
 
 void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle);
 
-int ehea_create_busmap( void );
-void ehea_destroy_busmap( void );
+int ehea_create_busmap(void);
+void ehea_destroy_busmap(void);
 u64 ehea_map_vaddr(void *caddr);
 
 #endif	/* __EHEA_QMR_H__ */

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7667a62..3634223 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c

@@ -13,7 +13,7 @@
  * Copyright (C) 2004 Andrew de Quincey (wol support)
  * Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane
  *		IRQ rate fixes, bigendian fixes, cleanups, verification)
- * Copyright (c) 2004,5,6 NVIDIA Corporation
+ * Copyright (c) 2004,2005,2006,2007,2008 NVIDIA Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -226,7 +226,7 @@
 #define NVREG_MISC1_HD		0x02
 #define NVREG_MISC1_FORCE	0x3b0f3c
 
-	NvRegMacReset = 0x3c,
+	NvRegMacReset = 0x34,
 #define NVREG_MAC_RESET_ASSERT	0x0F3
 	NvRegTransmitterControl = 0x084,
 #define NVREG_XMITCTL_START	0x01
@@ -277,7 +277,9 @@
 #define NVREG_MCASTADDRA_FORCE	0x01
 	NvRegMulticastAddrB = 0xB4,
 	NvRegMulticastMaskA = 0xB8,
+#define NVREG_MCASTMASKA_NONE		0xffffffff
 	NvRegMulticastMaskB = 0xBC,
+#define NVREG_MCASTMASKB_NONE		0xffff
 
 	NvRegPhyInterface = 0xC0,
 #define PHY_RGMII		0x10000000
@@ -316,8 +318,8 @@
 	NvRegTxRingPhysAddrHigh = 0x148,
 	NvRegRxRingPhysAddrHigh = 0x14C,
 	NvRegTxPauseFrame = 0x170,
-#define NVREG_TX_PAUSEFRAME_DISABLE	0x1ff0080
-#define NVREG_TX_PAUSEFRAME_ENABLE	0x0c00030
+#define NVREG_TX_PAUSEFRAME_DISABLE	0x01ff0080
+#define NVREG_TX_PAUSEFRAME_ENABLE	0x01800010
 	NvRegMIIStatus = 0x180,
 #define NVREG_MIISTAT_ERROR		0x0001
 #define NVREG_MIISTAT_LINKCHANGE	0x0008
@@ -471,9 +473,9 @@
 #define NV_RX_AVAIL		(1<<31)
 
 #define NV_RX2_CHECKSUMMASK	(0x1C000000)
-#define NV_RX2_CHECKSUMOK1	(0x10000000)
-#define NV_RX2_CHECKSUMOK2	(0x14000000)
-#define NV_RX2_CHECKSUMOK3	(0x18000000)
+#define NV_RX2_CHECKSUM_IP	(0x10000000)
+#define NV_RX2_CHECKSUM_IP_TCP	(0x14000000)
+#define NV_RX2_CHECKSUM_IP_UDP	(0x18000000)
 #define NV_RX2_DESCRIPTORVALID	(1<<29)
 #define NV_RX2_SUBSTRACT1	(1<<25)
 #define NV_RX2_ERROR1		(1<<18)
@@ -2375,14 +2377,9 @@
 						goto next_pkt;
 					}
 				}
-				if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK2)/*ip and tcp */ {
+				if (((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUM_IP_TCP) || /*ip and tcp */
+				    ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUM_IP_UDP))   /*ip and udp */
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
-				} else {
-					if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK1 ||
-					    (flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK3) {
-						skb->ip_summed = CHECKSUM_UNNECESSARY;
-					}
-				}
 			} else {
 				dev_kfree_skb(skb);
 				goto next_pkt;
@@ -2474,14 +2471,9 @@
 				}
 			}
 
-			if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK2)/*ip and tcp */ {
+			if (((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUM_IP_TCP) || /*ip and tcp */
+			    ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUM_IP_UDP))   /*ip and udp */
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
-			} else {
-				if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK1 ||
-				    (flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK3) {
-					skb->ip_summed = CHECKSUM_UNNECESSARY;
-				}
-			}
 
 			/* got a valid packet - forward it to the network core */
 			skb_put(skb, len);
@@ -2703,6 +2695,9 @@
 			addr[1] = alwaysOn[1];
 			mask[0] = alwaysOn[0] | alwaysOff[0];
 			mask[1] = alwaysOn[1] | alwaysOff[1];
+		} else {
+			mask[0] = NVREG_MCASTMASKA_NONE;
+			mask[1] = NVREG_MCASTMASKB_NONE;
 		}
 	}
 	addr[0] |= NVREG_MCASTADDRA_FORCE;
@@ -4813,8 +4808,8 @@
 		nv_mac_reset(dev);
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
 	writel(0, base + NvRegMulticastAddrB);
-	writel(0, base + NvRegMulticastMaskA);
-	writel(0, base + NvRegMulticastMaskB);
+	writel(NVREG_MCASTMASKA_NONE, base + NvRegMulticastMaskA);
+	writel(NVREG_MCASTMASKB_NONE, base + NvRegMulticastMaskB);
 	writel(0, base + NvRegPacketFilterFlags);
 
 	writel(0, base + NvRegTransmitterControl);
@@ -4908,8 +4903,8 @@
 	spin_lock_irq(&np->lock);
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
 	writel(0, base + NvRegMulticastAddrB);
-	writel(0, base + NvRegMulticastMaskA);
-	writel(0, base + NvRegMulticastMaskB);
+	writel(NVREG_MCASTMASKA_NONE, base + NvRegMulticastMaskA);
+	writel(NVREG_MCASTMASKB_NONE, base + NvRegMulticastMaskB);
 	writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
 	/* One manual link speed update: Interrupts are enabled, future link
 	 * speed changes cause interrupts and are handled by nv_link_irq().
@@ -5603,35 +5598,35 @@
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP77 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
 	},
 	{0,},
 };

diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 46e2c52..95e3464 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c

@@ -901,12 +901,12 @@
 	0x0000
 };
 
-static char *ibmlana_adapter_names[] __initdata = {
+static char *ibmlana_adapter_names[] __devinitdata = {
 	"IBM LAN Adapter/A",
 	NULL
 };
 
-static int ibmlana_init_one(struct device *kdev)
+static int __devinit ibmlana_init_one(struct device *kdev)
 {
 	struct mca_device *mdev = to_mca_device(kdev);
 	struct net_device *dev;

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index f3c144d..d4eb8e2 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c

@@ -438,7 +438,6 @@
 	if (adapter->msix_entries) {
 		err = igb_request_msix(adapter);
 		if (!err) {
-			struct e1000_hw *hw = &adapter->hw;
 			/* enable IAM, auto-mask,
 			 * DO NOT USE EIAME or IAME in legacy mode */
 			wr32(E1000_IAM, IMS_ENABLE_MASK);

diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
index e489c66..0787657 100644
--- a/drivers/net/irda/ali-ircc.h
+++ b/drivers/net/irda/ali-ircc.h

@@ -173,13 +173,13 @@
 
 struct frame_cb {
 	void *start; /* Start of frame in DMA mem */
-	int len;     /* Lenght of frame in DMA mem */
+	int len;     /* Length of frame in DMA mem */
 };
 
 struct tx_fifo {
 	struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
 	int             ptr;                  /* Currently being sent */
-	int             len;                  /* Lenght of queue */
+	int             len;                  /* Length of queue */
 	int             free;                 /* Next free slot */
 	void           *tail;                 /* Next free start in DMA mem */
 };

diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index bbdc97f..29398a4 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h

@@ -231,13 +231,13 @@
 
 struct frame_cb {
 	void *start; /* Start of frame in DMA mem */
-	int len;     /* Lenght of frame in DMA mem */
+	int len;     /* Length of frame in DMA mem */
 };
 
 struct tx_fifo {
 	struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
 	int             ptr;                  /* Currently being sent */
-	int             len;                  /* Lenght of queue */
+	int             len;                  /* Length of queue */
 	int             free;                 /* Next free slot */
 	void           *tail;                 /* Next free start in DMA mem */
 };

diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
index 204b1b3..9d012f0 100644
--- a/drivers/net/irda/via-ircc.h
+++ b/drivers/net/irda/via-ircc.h

@@ -54,13 +54,13 @@
 
 struct frame_cb {
 	void *start;		/* Start of frame in DMA mem */
-	int len;		/* Lenght of frame in DMA mem */
+	int len;		/* Length of frame in DMA mem */
 };
 
 struct tx_fifo {
 	struct frame_cb queue[MAX_TX_WINDOW + 2];	/* Info about frames in queue */
 	int ptr;		/* Currently being sent */
-	int len;		/* Lenght of queue */
+	int len;		/* Length of queue */
 	int free;		/* Next free slot */
 	void *tail;		/* Next free start in DMA mem */
 };

diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index c429a50..0c5447d 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c

@@ -148,7 +148,7 @@
  *
  *	"The author (me) didn't use spin_lock_irqsave because the slowness of the
  *	card means that approach caused horrible problems like losing serial data
- *	at 38400 baud on some chips. Rememeber many 8390 nics on PCI were ISA
+ *	at 38400 baud on some chips. Remember many 8390 nics on PCI were ISA
  *	chips with FPGA front ends.
  *	
  *	Ok the logic behind the 8390 is very simple:

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index e10528e..81bf005 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c

@@ -1084,7 +1084,7 @@
 	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
 }
 
-static int __devinit macb_probe(struct platform_device *pdev)
+static int __init macb_probe(struct platform_device *pdev)
 {
 	struct eth_platform_data *pdata;
 	struct resource *regs;
@@ -1248,7 +1248,7 @@
 	return err;
 }
 
-static int __devexit macb_remove(struct platform_device *pdev)
+static int __exit macb_remove(struct platform_device *pdev)
 {
 	struct net_device *dev;
 	struct macb *bp;
@@ -1276,8 +1276,7 @@
 }
 
 static struct platform_driver macb_driver = {
-	.probe		= macb_probe,
-	.remove		= __devexit_p(macb_remove),
+	.remove		= __exit_p(macb_remove),
 	.driver		= {
 		.name		= "macb",
 	},
@@ -1285,7 +1284,7 @@
 
 static int __init macb_init(void)
 {
-	return platform_driver_register(&macb_driver);
+	return platform_driver_probe(&macb_driver, macb_probe);
 }
 
 static void __exit macb_exit(void)

diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index aafc3ce..6d343ef 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c

@@ -4,8 +4,6 @@
  * for more details.
  */
 
-#define DEBUG
-
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -15,11 +13,93 @@
 #include <linux/platform_device.h>
 #include <asm/mips-boards/simint.h>
 
-#include "mipsnet.h"		/* actual device IO mapping */
+#define MIPSNET_VERSION "2007-11-17"
 
-#define MIPSNET_VERSION "2005-06-20"
+/*
+ * Net status/control block as seen by sw in the core.
+ */
+struct mipsnet_regs {
+	/*
+	 * Device info for probing, reads as MIPSNET%d where %d is some
+	 * form of version.
+	 */
+	u64 devId;		/*0x00 */
 
-#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field))
+	/*
+	 * read only busy flag.
+	 * Set and cleared by the Net Device to indicate that an rx or a tx
+	 * is in progress.
+	 */
+	u32 busy;		/*0x08 */
+
+	/*
+	 * Set by the Net Device.
+	 * The device will set it once data has been received.
+	 * The value is the number of bytes that should be read from
+	 * rxDataBuffer.  The value will decrease till 0 until all the data
+	 * from rxDataBuffer has been read.
+	 */
+	u32 rxDataCount;	/*0x0c */
+#define MIPSNET_MAX_RXTX_DATACOUNT (1 << 16)
+
+	/*
+	 * Settable from the MIPS core, cleared by the Net Device.
+	 * The core should set the number of bytes it wants to send,
+	 * then it should write those bytes of data to txDataBuffer.
+	 * The device will clear txDataCount has been processed (not
+	 * necessarily sent).
+	 */
+	u32 txDataCount;	/*0x10 */
+
+	/*
+	 * Interrupt control
+	 *
+	 * Used to clear the interrupted generated by this dev.
+	 * Write a 1 to clear the interrupt. (except bit31).
+	 *
+	 * Bit0 is set if it was a tx-done interrupt.
+	 * Bit1 is set when new rx-data is available.
+	 *    Until this bit is cleared there will be no other RXs.
+	 *
+	 * Bit31 is used for testing, it clears after a read.
+	 *    Writing 1 to this bit will cause an interrupt to be generated.
+	 *    To clear the test interrupt, write 0 to this register.
+	 */
+	u32 interruptControl;	/*0x14 */
+#define MIPSNET_INTCTL_TXDONE     (1u << 0)
+#define MIPSNET_INTCTL_RXDONE     (1u << 1)
+#define MIPSNET_INTCTL_TESTBIT    (1u << 31)
+
+	/*
+	 * Readonly core-specific interrupt info for the device to signal
+	 * the core. The meaning of the contents of this field might change.
+	 */
+	/* XXX: the whole memIntf interrupt scheme is messy: the device
+	 * should have no control what so ever of what VPE/register set is
+	 * being used.
+	 * The MemIntf should only expose interrupt lines, and something in
+	 * the config should be responsible for the line<->core/vpe bindings.
+	 */
+	u32 interruptInfo;	/*0x18 */
+
+	/*
+	 * This is where the received data is read out.
+	 * There is more data to read until rxDataReady is 0.
+	 * Only 1 byte at this regs offset is used.
+	 */
+	u32 rxDataBuffer;	/*0x1c */
+
+	/*
+	 * This is where the data to transmit is written.
+	 * Data should be written for the amount specified in the
+	 * txDataCount register.
+	 * Only 1 byte at this regs offset is used.
+	 */
+	u32 txDataBuffer;	/*0x20 */
+};
+
+#define regaddr(dev, field) \
+  (dev->base_addr + offsetof(struct mipsnet_regs, field))
 
 static char mipsnet_string[] = "mipsnet";
 
@@ -29,32 +109,27 @@
 static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
 			int len)
 {
-	uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount));
-
-	if (available_len < len)
-		return -EFAULT;
-
 	for (; len > 0; len--, kdata++)
-		*kdata = inb(mipsnet_reg_address(dev, rxDataBuffer));
+		*kdata = inb(regaddr(dev, rxDataBuffer));
 
-	return inl(mipsnet_reg_address(dev, rxDataCount));
+	return inl(regaddr(dev, rxDataCount));
 }
 
-static inline ssize_t mipsnet_put_todevice(struct net_device *dev,
+static inline void mipsnet_put_todevice(struct net_device *dev,
 	struct sk_buff *skb)
 {
 	int count_to_go = skb->len;
 	char *buf_ptr = skb->data;
 
-	outl(skb->len, mipsnet_reg_address(dev, txDataCount));
+	outl(skb->len, regaddr(dev, txDataCount));
 
 	for (; count_to_go; buf_ptr++, count_to_go--)
-		outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer));
+		outb(*buf_ptr, regaddr(dev, txDataBuffer));
 
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
-	return skb->len;
+	dev_kfree_skb(skb);
 }
 
 static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -69,18 +144,20 @@
 	return 0;
 }
 
-static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count)
+static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t len)
 {
 	struct sk_buff *skb;
-	size_t len = count;
 
-	skb = alloc_skb(len + 2, GFP_KERNEL);
+	if (!len)
+		return len;
+
+	skb = dev_alloc_skb(len + NET_IP_ALIGN);
 	if (!skb) {
 		dev->stats.rx_dropped++;
 		return -ENOMEM;
 	}
 
-	skb_reserve(skb, 2);
+	skb_reserve(skb, NET_IP_ALIGN);
 	if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len))
 		return -EFAULT;
 
@@ -92,50 +169,42 @@
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += len;
 
-	return count;
+	return len;
 }
 
 static irqreturn_t mipsnet_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = dev_id;
+	u32 int_flags;
+	irqreturn_t ret = IRQ_NONE;
 
-	irqreturn_t retval = IRQ_NONE;
-	uint64_t interruptFlags;
+	if (irq != dev->irq)
+		goto out_badirq;
 
-	if (irq == dev->irq) {
-		retval = IRQ_HANDLED;
-
-		interruptFlags =
-		    inl(mipsnet_reg_address(dev, interruptControl));
-
-		if (interruptFlags & MIPSNET_INTCTL_TXDONE) {
-			outl(MIPSNET_INTCTL_TXDONE,
-			     mipsnet_reg_address(dev, interruptControl));
-			/* only one packet at a time, we are done. */
-			netif_wake_queue(dev);
-		} else if (interruptFlags & MIPSNET_INTCTL_RXDONE) {
-			mipsnet_get_fromdev(dev,
-				    inl(mipsnet_reg_address(dev, rxDataCount)));
-			outl(MIPSNET_INTCTL_RXDONE,
-			     mipsnet_reg_address(dev, interruptControl));
-
-		} else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) {
-			/*
-			 * TESTBIT is cleared on read.
-			 * And takes effect after a write with 0
-			 */
-			outl(0, mipsnet_reg_address(dev, interruptControl));
-		} else {
-			/* Maybe shared IRQ, just ignore, no clearing. */
-			retval = IRQ_NONE;
-		}
-
-	} else {
-		printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
-		       dev->name, __FUNCTION__, irq);
-		retval = IRQ_NONE;
+	/* TESTBIT is cleared on read. */
+	int_flags = inl(regaddr(dev, interruptControl));
+	if (int_flags & MIPSNET_INTCTL_TESTBIT) {
+		/* TESTBIT takes effect after a write with 0. */
+		outl(0, regaddr(dev, interruptControl));
+		ret = IRQ_HANDLED;
+	} else if (int_flags & MIPSNET_INTCTL_TXDONE) {
+		/* Only one packet at a time, we are done. */
+		dev->stats.tx_packets++;
+		netif_wake_queue(dev);
+		outl(MIPSNET_INTCTL_TXDONE,
+		     regaddr(dev, interruptControl));
+		ret = IRQ_HANDLED;
+	} else if (int_flags & MIPSNET_INTCTL_RXDONE) {
+		mipsnet_get_fromdev(dev, inl(regaddr(dev, rxDataCount)));
+		outl(MIPSNET_INTCTL_RXDONE, regaddr(dev, interruptControl));
+		ret = IRQ_HANDLED;
 	}
-	return retval;
+	return ret;
+
+out_badirq:
+	printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
+	       dev->name, __FUNCTION__, irq);
+	return ret;
 }
 
 static int mipsnet_open(struct net_device *dev)
@@ -144,18 +213,15 @@
 
 	err = request_irq(dev->irq, &mipsnet_interrupt,
 			  IRQF_SHARED, dev->name, (void *) dev);
-
 	if (err) {
-		release_region(dev->base_addr, MIPSNET_IO_EXTENT);
+		release_region(dev->base_addr, sizeof(struct mipsnet_regs));
 		return err;
 	}
 
 	netif_start_queue(dev);
 
 	/* test interrupt handler */
-	outl(MIPSNET_INTCTL_TESTBIT,
-	     mipsnet_reg_address(dev, interruptControl));
-
+	outl(MIPSNET_INTCTL_TESTBIT, regaddr(dev, interruptControl));
 
 	return 0;
 }
@@ -163,7 +229,7 @@
 static int mipsnet_close(struct net_device *dev)
 {
 	netif_stop_queue(dev);
-
+	free_irq(dev->irq, dev);
 	return 0;
 }
 
@@ -194,10 +260,11 @@
 	 */
 	netdev->base_addr = 0x4200;
 	netdev->irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB0 +
-		      inl(mipsnet_reg_address(netdev, interruptInfo));
+		      inl(regaddr(netdev, interruptInfo));
 
 	/* Get the io region now, get irq on open() */
-	if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) {
+	if (!request_region(netdev->base_addr, sizeof(struct mipsnet_regs),
+			    "mipsnet")) {
 		err = -EBUSY;
 		goto out_free_netdev;
 	}
@@ -217,7 +284,7 @@
 	return 0;
 
 out_free_region:
-	release_region(netdev->base_addr, MIPSNET_IO_EXTENT);
+	release_region(netdev->base_addr, sizeof(struct mipsnet_regs));
 
 out_free_netdev:
 	free_netdev(netdev);
@@ -231,7 +298,7 @@
 	struct net_device *dev = dev_get_drvdata(device);
 
 	unregister_netdev(dev);
-	release_region(dev->base_addr, MIPSNET_IO_EXTENT);
+	release_region(dev->base_addr, sizeof(struct mipsnet_regs));
 	free_netdev(dev);
 	dev_set_drvdata(device, NULL);
 

diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h
deleted file mode 100644
index 0132c67..0000000
--- a/drivers/net/mipsnet.h
+++ /dev/null

@@ -1,112 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __MIPSNET_H
-#define __MIPSNET_H
-
-/*
- *  Id of this Net device, as seen by the core.
- */
-#define MIPS_NET_DEV_ID ((uint64_t)	   \
-			     ((uint64_t) 'M' <<  0)| \
-			     ((uint64_t) 'I' <<  8)| \
-			     ((uint64_t) 'P' << 16)| \
-			     ((uint64_t) 'S' << 24)| \
-			     ((uint64_t) 'N' << 32)| \
-			     ((uint64_t) 'E' << 40)| \
-			     ((uint64_t) 'T' << 48)| \
-			     ((uint64_t) '0' << 56))
-
-/*
- * Net status/control block as seen by sw in the core.
- * (Why not use bit fields? can't be bothered with cross-platform struct
- *  packing.)
- */
-struct net_control_block {
-	/*
-	 * dev info for probing
-	 * reads as MIPSNET%d where %d is some form of version
-	 */
-	uint64_t devId;		/* 0x00 */
-
-	/*
-	 * read only busy flag.
-	 * Set and cleared by the Net Device to indicate that an rx or a tx
-	 * is in progress.
-	 */
-	uint32_t busy;		/* 0x08 */
-
-	/*
-	 * Set by the Net Device.
-	 * The device will set it once data has been received.
-	 * The value is the number of bytes that should be read from
-	 * rxDataBuffer.  The value will decrease till 0 until all the data
-	 * from rxDataBuffer has been read.
-	 */
-	uint32_t rxDataCount;	/* 0x0c */
-#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
-
-	/*
-	 * Settable from the MIPS core, cleared by the Net Device.  The core
-	 * should set the number of bytes it wants to send, then it should
-	 * write those bytes of data to txDataBuffer.  The device will clear
-	 * txDataCount has been processed (not necessarily sent).
-	 */
-	uint32_t txDataCount;	/* 0x10 */
-
-	/*
-	 * Interrupt control
-	 *
-	 * Used to clear the interrupted generated by this dev.
-	 * Write a 1 to clear the interrupt. (except bit31).
-	 *
-	 * Bit0 is set if it was a tx-done interrupt.
-	 * Bit1 is set when new rx-data is available.
-	 *      Until this bit is cleared there will be no other RXs.
-	 *
-	 * Bit31 is used for testing, it clears after a read.
-	 *    Writing 1 to this bit will cause an interrupt to be generated.
-	 *    To clear the test interrupt, write 0 to this register.
-	 */
-	uint32_t interruptControl;	/*0x14 */
-#define MIPSNET_INTCTL_TXDONE     ((uint32_t)(1 <<  0))
-#define MIPSNET_INTCTL_RXDONE     ((uint32_t)(1 <<  1))
-#define MIPSNET_INTCTL_TESTBIT    ((uint32_t)(1 << 31))
-#define MIPSNET_INTCTL_ALLSOURCES	(MIPSNET_INTCTL_TXDONE | \
-					 MIPSNET_INTCTL_RXDONE | \
-					 MIPSNET_INTCTL_TESTBIT)
-
-	/*
-	 * Readonly core-specific interrupt info for the device to signal the
-	 * core.  The meaning of the contents of this field might change.
-	 *
-	 * TODO: the whole memIntf interrupt scheme is messy: the device should
-	 *       have no control what so ever of what VPE/register set is being
-	 *       used.  The MemIntf should only expose interrupt lines, and
-	 *       something in the config should be responsible for the
-	 *       line<->core/vpe bindings.
-	 */
-	uint32_t interruptInfo;	/* 0x18 */
-
-	/*
-	 *  This is where the received data is read out.
-	 *  There is more data to read until rxDataReady is 0.
-	 *  Only 1 byte at this regs offset is used.
-	 */
-	uint32_t rxDataBuffer;	/* 0x1c */
-
-	/*
-	 * This is where the data to transmit is written.  Data should be
-	 * written for the amount specified in the txDataCount register.  Only
-	 * 1 byte at this regs offset is used.
-	 */
-	uint32_t txDataBuffer;	/* 0x20 */
-};
-
-#define MIPSNET_IO_EXTENT 0x40	/* being generous */
-
-#define field_offset(field) (offsetof(struct net_control_block, field))
-
-#endif /* __MIPSNET_H */

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c329a4f..0a3e604 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c

@@ -203,22 +203,8 @@
 IIId. Synchronization
 
 Most operations are synchronized on the np->lock irq spinlock, except the
-performance critical codepaths:
-
-The rx process only runs in the interrupt handler. Access from outside
-the interrupt handler is only permitted after disable_irq().
-
-The rx process usually runs under the netif_tx_lock. If np->intr_tx_reap
-is set, then access is permitted under spin_lock_irq(&np->lock).
-
-Thus configuration functions that want to access everything must call
-	disable_irq(dev->irq);
-	netif_tx_lock_bh(dev);
-	spin_lock_irq(&np->lock);
-
-IV. Notes
-
-NatSemi PCI network controllers are very uncommon.
+recieve and transmit paths which are synchronised using a combination of
+hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.
 
 IVb. References
 

diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index bb88a41..2e39e028 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c

@@ -62,6 +62,10 @@
 
 #define LRO_MAX_AGGR 64
 
+#define PE_MIN_MTU	64
+#define PE_MAX_MTU	1500
+#define PE_DEF_MTU	ETH_DATA_LEN
+
 #define DEFAULT_MSG_ENABLE	  \
 	(NETIF_MSG_DRV		| \
 	 NETIF_MSG_PROBE	| \
@@ -82,8 +86,6 @@
 				 & ((ring)->size - 1))
 #define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
 
-#define BUF_SIZE 1646 /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
 MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
@@ -175,6 +177,24 @@
 	return -1;
 }
 
+static void pasemi_mac_intf_disable(struct pasemi_mac *mac)
+{
+	unsigned int flags;
+
+	flags = read_mac_reg(mac, PAS_MAC_CFG_PCFG);
+	flags &= ~PAS_MAC_CFG_PCFG_PE;
+	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
+}
+
+static void pasemi_mac_intf_enable(struct pasemi_mac *mac)
+{
+	unsigned int flags;
+
+	flags = read_mac_reg(mac, PAS_MAC_CFG_PCFG);
+	flags |= PAS_MAC_CFG_PCFG_PE;
+	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
+}
+
 static int pasemi_get_mac_addr(struct pasemi_mac *mac)
 {
 	struct pci_dev *pdev = mac->pdev;
@@ -221,6 +241,33 @@
 	return 0;
 }
 
+static int pasemi_mac_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct pasemi_mac *mac = netdev_priv(dev);
+	struct sockaddr *addr = p;
+	unsigned int adr0, adr1;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	adr0 = dev->dev_addr[2] << 24 |
+	       dev->dev_addr[3] << 16 |
+	       dev->dev_addr[4] << 8 |
+	       dev->dev_addr[5];
+	adr1 = read_mac_reg(mac, PAS_MAC_CFG_ADR1);
+	adr1 &= ~0xffff;
+	adr1 |= dev->dev_addr[0] << 8 | dev->dev_addr[1];
+
+	pasemi_mac_intf_disable(mac);
+	write_mac_reg(mac, PAS_MAC_CFG_ADR0, adr0);
+	write_mac_reg(mac, PAS_MAC_CFG_ADR1, adr1);
+	pasemi_mac_intf_enable(mac);
+
+	return 0;
+}
+
 static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
 		       void **tcph, u64 *hdr_flags, void *data)
 {
@@ -453,7 +500,7 @@
 
 }
 
-static void pasemi_mac_free_rx_resources(struct pasemi_mac *mac)
+static void pasemi_mac_free_rx_buffers(struct pasemi_mac *mac)
 {
 	struct pasemi_mac_rxring *rx = rx_ring(mac);
 	unsigned int i;
@@ -473,7 +520,12 @@
 	}
 
 	for (i = 0; i < RX_RING_SIZE; i++)
-		RX_DESC(rx, i) = 0;
+		RX_BUFF(rx, i) = 0;
+}
+
+static void pasemi_mac_free_rx_resources(struct pasemi_mac *mac)
+{
+	pasemi_mac_free_rx_buffers(mac);
 
 	dma_free_coherent(&mac->dma_pdev->dev, RX_RING_SIZE * sizeof(u64),
 			  rx_ring(mac)->buffers, rx_ring(mac)->buf_dma);
@@ -503,14 +555,14 @@
 		/* Entry in use? */
 		WARN_ON(*buff);
 
-		skb = dev_alloc_skb(BUF_SIZE);
+		skb = dev_alloc_skb(mac->bufsz);
 		skb_reserve(skb, LOCAL_SKB_ALIGN);
 
 		if (unlikely(!skb))
 			break;
 
 		dma = pci_map_single(mac->dma_pdev, skb->data,
-				     BUF_SIZE - LOCAL_SKB_ALIGN,
+				     mac->bufsz - LOCAL_SKB_ALIGN,
 				     PCI_DMA_FROMDEVICE);
 
 		if (unlikely(dma_mapping_error(dma))) {
@@ -520,7 +572,7 @@
 
 		info->skb = skb;
 		info->dma = dma;
-		*buff = XCT_RXB_LEN(BUF_SIZE) | XCT_RXB_ADDR(dma);
+		*buff = XCT_RXB_LEN(mac->bufsz) | XCT_RXB_ADDR(dma);
 		fill++;
 	}
 
@@ -650,7 +702,7 @@
 
 		len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
 
-		pci_unmap_single(pdev, dma, BUF_SIZE-LOCAL_SKB_ALIGN,
+		pci_unmap_single(pdev, dma, mac->bufsz - LOCAL_SKB_ALIGN,
 				 PCI_DMA_FROMDEVICE);
 
 		if (macrx & XCT_MACRX_CRC) {
@@ -874,24 +926,6 @@
 	return IRQ_HANDLED;
 }
 
-static void pasemi_mac_intf_disable(struct pasemi_mac *mac)
-{
-	unsigned int flags;
-
-	flags = read_mac_reg(mac, PAS_MAC_CFG_PCFG);
-	flags &= ~PAS_MAC_CFG_PCFG_PE;
-	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
-}
-
-static void pasemi_mac_intf_enable(struct pasemi_mac *mac)
-{
-	unsigned int flags;
-
-	flags = read_mac_reg(mac, PAS_MAC_CFG_PCFG);
-	flags |= PAS_MAC_CFG_PCFG_PE;
-	write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags);
-}
-
 static void pasemi_adjust_link(struct net_device *dev)
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
@@ -1148,11 +1182,71 @@
 
 #define MAX_RETRIES 5000
 
+static void pasemi_mac_pause_txchan(struct pasemi_mac *mac)
+{
+	unsigned int sta, retries;
+	int txch = tx_ring(mac)->chan.chno;
+
+	write_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(txch),
+		      PAS_DMA_TXCHAN_TCMDSTA_ST);
+
+	for (retries = 0; retries < MAX_RETRIES; retries++) {
+		sta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(txch));
+		if (!(sta & PAS_DMA_TXCHAN_TCMDSTA_ACT))
+			break;
+		cond_resched();
+	}
+
+	if (sta & PAS_DMA_TXCHAN_TCMDSTA_ACT)
+		dev_err(&mac->dma_pdev->dev,
+			"Failed to stop tx channel, tcmdsta %08x\n", sta);
+
+	write_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(txch), 0);
+}
+
+static void pasemi_mac_pause_rxchan(struct pasemi_mac *mac)
+{
+	unsigned int sta, retries;
+	int rxch = rx_ring(mac)->chan.chno;
+
+	write_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch),
+		      PAS_DMA_RXCHAN_CCMDSTA_ST);
+	for (retries = 0; retries < MAX_RETRIES; retries++) {
+		sta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch));
+		if (!(sta & PAS_DMA_RXCHAN_CCMDSTA_ACT))
+			break;
+		cond_resched();
+	}
+
+	if (sta & PAS_DMA_RXCHAN_CCMDSTA_ACT)
+		dev_err(&mac->dma_pdev->dev,
+			"Failed to stop rx channel, ccmdsta 08%x\n", sta);
+	write_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch), 0);
+}
+
+static void pasemi_mac_pause_rxint(struct pasemi_mac *mac)
+{
+	unsigned int sta, retries;
+
+	write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+		      PAS_DMA_RXINT_RCMDSTA_ST);
+	for (retries = 0; retries < MAX_RETRIES; retries++) {
+		sta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
+		if (!(sta & PAS_DMA_RXINT_RCMDSTA_ACT))
+			break;
+		cond_resched();
+	}
+
+	if (sta & PAS_DMA_RXINT_RCMDSTA_ACT)
+		dev_err(&mac->dma_pdev->dev,
+			"Failed to stop rx interface, rcmdsta %08x\n", sta);
+	write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0);
+}
+
 static int pasemi_mac_close(struct net_device *dev)
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int sta;
-	int retries;
 	int rxch, txch;
 
 	rxch = rx_ring(mac)->chan.chno;
@@ -1190,51 +1284,10 @@
 	pasemi_mac_clean_tx(tx_ring(mac));
 	pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
 
-	/* Disable interface */
-	write_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(txch),
-		      PAS_DMA_TXCHAN_TCMDSTA_ST);
-	write_dma_reg( PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
-		      PAS_DMA_RXINT_RCMDSTA_ST);
-	write_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch),
-		      PAS_DMA_RXCHAN_CCMDSTA_ST);
-
-	for (retries = 0; retries < MAX_RETRIES; retries++) {
-		sta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(rxch));
-		if (!(sta & PAS_DMA_TXCHAN_TCMDSTA_ACT))
-			break;
-		cond_resched();
-	}
-
-	if (sta & PAS_DMA_TXCHAN_TCMDSTA_ACT)
-		dev_err(&mac->dma_pdev->dev, "Failed to stop tx channel\n");
-
-	for (retries = 0; retries < MAX_RETRIES; retries++) {
-		sta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch));
-		if (!(sta & PAS_DMA_RXCHAN_CCMDSTA_ACT))
-			break;
-		cond_resched();
-	}
-
-	if (sta & PAS_DMA_RXCHAN_CCMDSTA_ACT)
-		dev_err(&mac->dma_pdev->dev, "Failed to stop rx channel\n");
-
-	for (retries = 0; retries < MAX_RETRIES; retries++) {
-		sta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
-		if (!(sta & PAS_DMA_RXINT_RCMDSTA_ACT))
-			break;
-		cond_resched();
-	}
-
-	if (sta & PAS_DMA_RXINT_RCMDSTA_ACT)
-		dev_err(&mac->dma_pdev->dev, "Failed to stop rx interface\n");
-
-	/* Then, disable the channel. This must be done separately from
-	 * stopping, since you can't disable when active.
-	 */
-
-	write_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(txch), 0);
-	write_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(rxch), 0);
-	write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0);
+	pasemi_mac_pause_txchan(mac);
+	pasemi_mac_pause_rxint(mac);
+	pasemi_mac_pause_rxchan(mac);
+	pasemi_mac_intf_disable(mac);
 
 	free_irq(mac->tx->chan.irq, mac->tx);
 	free_irq(mac->rx->chan.irq, mac->rx);
@@ -1388,6 +1441,62 @@
 	return pkts;
 }
 
+static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct pasemi_mac *mac = netdev_priv(dev);
+	unsigned int reg;
+	unsigned int rcmdsta;
+	int running;
+
+	if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
+		return -EINVAL;
+
+	running = netif_running(dev);
+
+	if (running) {
+		/* Need to stop the interface, clean out all already
+		 * received buffers, free all unused buffers on the RX
+		 * interface ring, then finally re-fill the rx ring with
+		 * the new-size buffers and restart.
+		 */
+
+		napi_disable(&mac->napi);
+		netif_tx_disable(dev);
+		pasemi_mac_intf_disable(mac);
+
+		rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
+		pasemi_mac_pause_rxint(mac);
+		pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
+		pasemi_mac_free_rx_buffers(mac);
+	}
+
+	/* Change maxf, i.e. what size frames are accepted.
+	 * Need room for ethernet header and CRC word
+	 */
+	reg = read_mac_reg(mac, PAS_MAC_CFG_MACCFG);
+	reg &= ~PAS_MAC_CFG_MACCFG_MAXF_M;
+	reg |= PAS_MAC_CFG_MACCFG_MAXF(new_mtu + ETH_HLEN + 4);
+	write_mac_reg(mac, PAS_MAC_CFG_MACCFG, reg);
+
+	dev->mtu = new_mtu;
+	/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
+	mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+
+	if (running) {
+		write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+			      rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
+
+		rx_ring(mac)->next_to_fill = 0;
+		pasemi_mac_replenish_rx_ring(dev, RX_RING_SIZE-1);
+
+		napi_enable(&mac->napi);
+		netif_start_queue(dev);
+		pasemi_mac_intf_enable(mac);
+	}
+
+	return 0;
+}
+
 static int __devinit
 pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -1475,6 +1584,12 @@
 	dev->stop = pasemi_mac_close;
 	dev->hard_start_xmit = pasemi_mac_start_tx;
 	dev->set_multicast_list = pasemi_mac_set_rx_mode;
+	dev->set_mac_address = pasemi_mac_set_mac_addr;
+	dev->mtu = PE_DEF_MTU;
+	/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
+	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+
+	dev->change_mtu = pasemi_mac_change_mtu;
 
 	if (err)
 		goto out;

diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 8bee2a6..99e7b93 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h

@@ -59,6 +59,7 @@
 	struct phy_device *phydev;
 	struct napi_struct napi;
 
+	int		bufsz; /* RX ring buffer size */
 	u8		type;
 #define MAC_TYPE_GMAC	1
 #define MAC_TYPE_XAUI	2
@@ -96,6 +97,9 @@
 /* MAC CFG register offsets */
 enum {
 	PAS_MAC_CFG_PCFG = 0x80,
+	PAS_MAC_CFG_MACCFG = 0x84,
+	PAS_MAC_CFG_ADR0 = 0x8c,
+	PAS_MAC_CFG_ADR1 = 0x90,
 	PAS_MAC_CFG_TXP = 0x98,
 	PAS_MAC_IPC_CHNL = 0x208,
 };
@@ -130,6 +134,18 @@
 #define PAS_MAC_CFG_PCFG_SPD_100M	0x00000001
 #define PAS_MAC_CFG_PCFG_SPD_1G		0x00000002
 #define PAS_MAC_CFG_PCFG_SPD_10G	0x00000003
+
+#define PAS_MAC_CFG_MACCFG_TXT_M	0x70000000
+#define PAS_MAC_CFG_MACCFG_TXT_S	28
+#define PAS_MAC_CFG_MACCFG_PRES_M	0x0f000000
+#define PAS_MAC_CFG_MACCFG_PRES_S	24
+#define PAS_MAC_CFG_MACCFG_MAXF_M	0x00ffff00
+#define PAS_MAC_CFG_MACCFG_MAXF_S	8
+#define PAS_MAC_CFG_MACCFG_MAXF(x)	(((x) << PAS_MAC_CFG_MACCFG_MAXF_S) & \
+					 PAS_MAC_CFG_MACCFG_MAXF_M)
+#define PAS_MAC_CFG_MACCFG_MINF_M	0x000000ff
+#define PAS_MAC_CFG_MACCFG_MINF_S	0
+
 #define PAS_MAC_CFG_TXP_FCF		0x01000000
 #define PAS_MAC_CFG_TXP_FCE		0x00800000
 #define PAS_MAC_CFG_TXP_FC		0x00400000

diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index ed402e0..fffc49b 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c

@@ -541,7 +541,7 @@
 #define NETDRV_W32_F(reg, val32)	do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
 
 
-#if MMIO_FLUSH_AUDIT_COMPLETE
+#ifdef MMIO_FLUSH_AUDIT_COMPLETE
 
 /* write MMIO register */
 #define NETDRV_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
@@ -603,7 +603,7 @@
 		return -ENOMEM;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
-	tp = dev->priv;
+	tp = netdev_priv(dev);
 
 	/* enable device (incl. PCI PM wakeup), and bus-mastering */
 	rc = pci_enable_device (pdev);
@@ -759,7 +759,7 @@
 		return i;
 	}
 
-	tp = dev->priv;
+	tp = netdev_priv(dev);
 
 	assert (ioaddr != NULL);
 	assert (dev != NULL);
@@ -783,7 +783,7 @@
 	dev->base_addr = (unsigned long) ioaddr;
 
 	/* dev->priv/tp zeroed and aligned in alloc_etherdev */
-	tp = dev->priv;
+	tp = netdev_priv(dev);
 
 	/* note: tp->chipset set in netdrv_init_board */
 	tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
@@ -841,7 +841,7 @@
 
 	assert (dev != NULL);
 
-	np = dev->priv;
+	np = netdev_priv(dev);
 	assert (np != NULL);
 
 	unregister_netdev (dev);
@@ -974,7 +974,7 @@
 
 static int mdio_read (struct net_device *dev, int phy_id, int location)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *mdio_addr = tp->mmio_addr + Config4;
 	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
 	int retval = 0;
@@ -1017,7 +1017,7 @@
 static void mdio_write (struct net_device *dev, int phy_id, int location,
 			int value)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *mdio_addr = tp->mmio_addr + Config4;
 	int mii_cmd =
 	    (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
@@ -1060,7 +1060,7 @@
 
 static int netdrv_open (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	int retval;
 #ifdef NETDRV_DEBUG
 	void *ioaddr = tp->mmio_addr;
@@ -1121,7 +1121,7 @@
 /* Start the hardware at open or resume. */
 static void netdrv_hw_start (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	u32 i;
 
@@ -1191,7 +1191,7 @@
 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
 static void netdrv_init_ring (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	int i;
 
 	DPRINTK ("ENTER\n");
@@ -1213,7 +1213,7 @@
 static void netdrv_timer (unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	int next_tick = 60 * HZ;
 	int mii_lpa;
@@ -1252,9 +1252,10 @@
 }
 
 
-static void netdrv_tx_clear (struct netdrv_private *tp)
+static void netdrv_tx_clear (struct net_device *dev)
 {
 	int i;
+	struct netdrv_private *tp = netdev_priv(dev);
 
 	atomic_set (&tp->cur_tx, 0);
 	atomic_set (&tp->dirty_tx, 0);
@@ -1278,7 +1279,7 @@
 
 static void netdrv_tx_timeout (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	int i;
 	u8 tmp8;
@@ -1311,7 +1312,7 @@
 	/* Stop a shared interrupt from scavenging while we are. */
 	spin_lock_irqsave (&tp->lock, flags);
 
-	netdrv_tx_clear (tp);
+	netdrv_tx_clear (dev);
 
 	spin_unlock_irqrestore (&tp->lock, flags);
 
@@ -1325,7 +1326,7 @@
 
 static int netdrv_start_xmit (struct sk_buff *skb, struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	int entry;
 
@@ -1525,7 +1526,7 @@
 		DPRINTK ("%s:  netdrv_rx() status %4.4x, size %4.4x,"
 			 " cur %4.4x.\n", dev->name, rx_status,
 			 rx_size, cur_rx);
-#if NETDRV_DEBUG > 2
+#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
 		{
 			int i;
 			DPRINTK ("%s: Frame contents ", dev->name);
@@ -1648,7 +1649,7 @@
 static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
 {
 	struct net_device *dev = (struct net_device *) dev_instance;
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	int boguscnt = max_interrupt_work;
 	void *ioaddr = tp->mmio_addr;
 	int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
@@ -1711,7 +1712,7 @@
 
 static int netdrv_close (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	unsigned long flags;
 
@@ -1738,10 +1739,10 @@
 
 	spin_unlock_irqrestore (&tp->lock, flags);
 
-	synchronize_irq ();
+	synchronize_irq (dev->irq);
 	free_irq (dev->irq, dev);
 
-	netdrv_tx_clear (tp);
+	netdrv_tx_clear (dev);
 
 	pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
 			    tp->rx_ring, tp->rx_ring_dma);
@@ -1762,7 +1763,7 @@
 
 static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	struct mii_ioctl_data *data = if_mii(rq);
 	unsigned long flags;
 	int rc = 0;
@@ -1805,7 +1806,7 @@
 
 static void netdrv_set_rx_mode (struct net_device *dev)
 {
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	u32 mc_filter[2];	/* Multicast hash filter */
 	int i, rx_mode;
@@ -1862,7 +1863,7 @@
 static int netdrv_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *dev = pci_get_drvdata (pdev);
-	struct netdrv_private *tp = dev->priv;
+	struct netdrv_private *tp = netdev_priv(dev);
 	void *ioaddr = tp->mmio_addr;
 	unsigned long flags;
 
@@ -1892,7 +1893,7 @@
 static int netdrv_resume (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata (pdev);
-	struct netdrv_private *tp = dev->priv;
+	/*struct netdrv_private *tp = netdev_priv(dev);*/
 
 	if (!netif_running(dev))
 		return 0;

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 7fe03ce..f4ca059 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig

@@ -60,6 +60,11 @@
 	---help---
 	  Currently supports the IP175C PHY.
 
+config REALTEK_PHY
+	tristate "Drivers for Realtek PHYs"
+	---help---
+	  Supports the Realtek 821x PHY.
+
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	---help---

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 3d6cc7b..5997d6e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile

@@ -12,5 +12,6 @@
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
 obj-$(CONFIG_FIXED_PHY)		+= fixed.o
 obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 29666c8..5b80358 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c

@@ -141,6 +141,20 @@
 	.driver 	= { .owner = THIS_MODULE },
 };
 
+static struct phy_driver bcm5482_driver = {
+    .phy_id		= 0x0143bcb0,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM5482",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= bcm54xx_ack_interrupt,
+	.config_intr	= bcm54xx_config_intr,
+	.driver 	= { .owner = THIS_MODULE },
+};
+
 static int __init broadcom_init(void)
 {
 	int ret;
@@ -154,8 +168,13 @@
 	ret = phy_driver_register(&bcm5461_driver);
 	if (ret)
 		goto out_5461;
+	ret = phy_driver_register(&bcm5482_driver);
+	if (ret)
+		goto out_5482;
 	return ret;
 
+out_5482:
+	phy_driver_unregister(&bcm5461_driver);
 out_5461:
 	phy_driver_unregister(&bcm5421_driver);
 out_5421:
@@ -166,6 +185,7 @@
 
 static void __exit broadcom_exit(void)
 {
+	phy_driver_unregister(&bcm5482_driver);
 	phy_driver_unregister(&bcm5461_driver);
 	phy_driver_unregister(&bcm5421_driver);
 	phy_driver_unregister(&bcm5411_driver);

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index c30196d..6e9f619 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c

@@ -49,7 +49,7 @@
 	int i;
 	int err = 0;
 
-	spin_lock_init(&bus->mdio_lock);
+	mutex_init(&bus->mdio_lock);
 
 	if (NULL == bus || NULL == bus->name ||
 			NULL == bus->read ||

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7c9e6e3..12fccb1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c

@@ -26,7 +26,6 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
-#include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/mii.h>
@@ -72,9 +71,11 @@
 	int retval;
 	struct mii_bus *bus = phydev->bus;
 
-	spin_lock_bh(&bus->mdio_lock);
+	BUG_ON(in_interrupt());
+
+	mutex_lock(&bus->mdio_lock);
 	retval = bus->read(bus, phydev->addr, regnum);
-	spin_unlock_bh(&bus->mdio_lock);
+	mutex_unlock(&bus->mdio_lock);
 
 	return retval;
 }
@@ -95,9 +96,11 @@
 	int err;
 	struct mii_bus *bus = phydev->bus;
 
-	spin_lock_bh(&bus->mdio_lock);
+	BUG_ON(in_interrupt());
+
+	mutex_lock(&bus->mdio_lock);
 	err = bus->write(bus, phydev->addr, regnum, val);
-	spin_unlock_bh(&bus->mdio_lock);
+	mutex_unlock(&bus->mdio_lock);
 
 	return err;
 }
@@ -428,7 +431,7 @@
 {
 	int err;
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 
 	if (AUTONEG_DISABLE == phydev->autoneg)
 		phy_sanitize_settings(phydev);
@@ -449,13 +452,14 @@
 	}
 
 out_unlock:
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 	return err;
 }
 EXPORT_SYMBOL(phy_start_aneg);
 
 
 static void phy_change(struct work_struct *work);
+static void phy_state_machine(struct work_struct *work);
 static void phy_timer(unsigned long data);
 
 /**
@@ -476,6 +480,7 @@
 {
 	phydev->adjust_state = handler;
 
+	INIT_WORK(&phydev->state_queue, phy_state_machine);
 	init_timer(&phydev->phy_timer);
 	phydev->phy_timer.function = &phy_timer;
 	phydev->phy_timer.data = (unsigned long) phydev;
@@ -493,11 +498,12 @@
 void phy_stop_machine(struct phy_device *phydev)
 {
 	del_timer_sync(&phydev->phy_timer);
+	cancel_work_sync(&phydev->state_queue);
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 	if (phydev->state > PHY_UP)
 		phydev->state = PHY_UP;
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	phydev->adjust_state = NULL;
 }
@@ -541,9 +547,9 @@
  */
 void phy_error(struct phy_device *phydev)
 {
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 	phydev->state = PHY_HALTED;
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 }
 
 /**
@@ -705,10 +711,10 @@
 	if (err)
 		goto phy_err;
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 		phydev->state = PHY_CHANGELINK;
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	atomic_dec(&phydev->irq_disable);
 	enable_irq(phydev->irq);
@@ -735,7 +741,7 @@
  */
 void phy_stop(struct phy_device *phydev)
 {
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 
 	if (PHY_HALTED == phydev->state)
 		goto out_unlock;
@@ -751,7 +757,7 @@
 	phydev->state = PHY_HALTED;
 
 out_unlock:
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	/*
 	 * Cannot call flush_scheduled_work() here as desired because
@@ -773,7 +779,7 @@
  */
 void phy_start(struct phy_device *phydev)
 {
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 
 	switch (phydev->state) {
 		case PHY_STARTING:
@@ -787,19 +793,26 @@
 		default:
 			break;
 	}
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 }
 EXPORT_SYMBOL(phy_stop);
 EXPORT_SYMBOL(phy_start);
 
-/* PHY timer which handles the state machine */
-static void phy_timer(unsigned long data)
+/**
+ * phy_state_machine - Handle the state machine
+ * @work: work_struct that describes the work to be done
+ *
+ * Description: Scheduled by the state_queue workqueue each time
+ *   phy_timer is triggered.
+ */
+static void phy_state_machine(struct work_struct *work)
 {
-	struct phy_device *phydev = (struct phy_device *)data;
+	struct phy_device *phydev =
+			container_of(work, struct phy_device, state_queue);
 	int needs_aneg = 0;
 	int err = 0;
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 
 	if (phydev->adjust_state)
 		phydev->adjust_state(phydev->attached_dev);
@@ -965,7 +978,7 @@
 			break;
 	}
 
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	if (needs_aneg)
 		err = phy_start_aneg(phydev);
@@ -976,3 +989,14 @@
 	mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
 }
 
+/* PHY timer which schedules the state machine work */
+static void phy_timer(unsigned long data)
+{
+	struct phy_device *phydev = (struct phy_device *)data;
+
+	/*
+	 * PHY I/O operations can potentially sleep so we ensure that
+	 * it's done from a process context
+	 */
+	schedule_work(&phydev->state_queue);
+}

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5b9e175..f4c4fd8 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c

@@ -25,7 +25,6 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
-#include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/mii.h>
@@ -80,7 +79,7 @@
 
 	dev->state = PHY_DOWN;
 
-	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock);
 
 	return dev;
 }
@@ -656,7 +655,7 @@
 	if (!(phydrv->flags & PHY_HAS_INTERRUPT))
 		phydev->irq = PHY_POLL;
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 
 	/* Start out supporting everything. Eventually,
 	 * a controller will attach, and may modify one
@@ -670,7 +669,7 @@
 	if (phydev->drv->probe)
 		err = phydev->drv->probe(phydev);
 
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	return err;
 
@@ -682,9 +681,9 @@
 
 	phydev = to_phy_device(dev);
 
-	spin_lock_bh(&phydev->lock);
+	mutex_lock(&phydev->lock);
 	phydev->state = PHY_DOWN;
-	spin_unlock_bh(&phydev->lock);
+	mutex_unlock(&phydev->lock);
 
 	if (phydev->drv->remove)
 		phydev->drv->remove(phydev);

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
new file mode 100644
index 0000000..a052a67
--- /dev/null
+++ b/drivers/net/phy/realtek.c

@@ -0,0 +1,80 @@
+/*
+ * drivers/net/phy/realtek.c
+ *
+ * Driver for Realtek PHYs
+ *
+ * Author: Johnson Leung <r58129@freescale.com>
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/phy.h>
+
+#define RTL821x_PHYSR		0x11
+#define RTL821x_PHYSR_DUPLEX	0x2000
+#define RTL821x_PHYSR_SPEED	0xc000
+#define RTL821x_INER		0x12
+#define RTL821x_INER_INIT	0x6400
+#define RTL821x_INSR		0x13
+
+MODULE_DESCRIPTION("Realtek PHY driver");
+MODULE_AUTHOR("Johnson Leung");
+MODULE_LICENSE("GPL");
+
+static int rtl821x_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, RTL821x_INSR);
+
+	return (err < 0) ? err : 0;
+}
+
+static int rtl821x_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, RTL821x_INER,
+				RTL821x_INER_INIT);
+	else
+		err = phy_write(phydev, RTL821x_INER, 0);
+
+	return err;
+}
+
+/* RTL8211B */
+static struct phy_driver rtl821x_driver = {
+	.phy_id		= 0x001cc912,
+	.name		= "RTL821x Gigabit Ethernet",
+	.phy_id_mask	= 0x001fffff,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &rtl821x_ack_interrupt,
+	.config_intr	= &rtl821x_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init realtek_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&rtl821x_driver);
+
+	return ret;
+}
+
+static void __exit realtek_exit(void)
+{
+	phy_driver_unregister(&rtl821x_driver);
+}
+
+module_init(realtek_init);
+module_exit(realtek_exit);

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 5fab7d7..6179a0a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c

@@ -8118,7 +8118,7 @@
 	lro->iph = ip;
 	lro->tcph = tcp;
 	lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
-	lro->tcp_ack = ntohl(tcp->ack_seq);
+	lro->tcp_ack = tcp->ack_seq;
 	lro->sg_num = 1;
 	lro->total_len = ntohs(ip->tot_len);
 	lro->frags_len = 0;
@@ -8127,10 +8127,10 @@
 	 * already been done.
  	 */
 	if (tcp->doff == 8) {
-		u32 *ptr;
-		ptr = (u32 *)(tcp+1);
+		__be32 *ptr;
+		ptr = (__be32 *)(tcp+1);
 		lro->saw_ts = 1;
-		lro->cur_tsval = *(ptr+1);
+		lro->cur_tsval = ntohl(*(ptr+1));
 		lro->cur_tsecr = *(ptr+2);
 	}
 	lro->in_use = 1;
@@ -8156,7 +8156,7 @@
 
 	/* Update tsecr field if this session has timestamps enabled */
 	if (lro->saw_ts) {
-		u32 *ptr = (u32 *)(tcp + 1);
+		__be32 *ptr = (__be32 *)(tcp + 1);
 		*(ptr+2) = lro->cur_tsecr;
 	}
 
@@ -8181,10 +8181,10 @@
 	lro->window = tcp->window;
 
 	if (lro->saw_ts) {
-		u32 *ptr;
+		__be32 *ptr;
 		/* Update tsecr and tsval from this packet */
-		ptr = (u32 *) (tcp + 1);
-		lro->cur_tsval = *(ptr + 1);
+		ptr = (__be32 *)(tcp+1);
+		lro->cur_tsval = ntohl(*(ptr+1));
 		lro->cur_tsecr = *(ptr + 2);
 	}
 }
@@ -8235,11 +8235,11 @@
 
 		/* Ensure timestamp value increases monotonically */
 		if (l_lro)
-			if (l_lro->cur_tsval > *((u32 *)(ptr+2)))
+			if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
 				return -1;
 
 		/* timestamp echo reply should be non-zero */
-		if (*((u32 *)(ptr+6)) == 0)
+		if (*((__be32 *)(ptr+6)) == 0)
 			return -1;
 	}
 

diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 9f6016c..64b88eb 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h

@@ -809,7 +809,7 @@
 	int		in_use;
 	__be16		window;
 	u32		cur_tsval;
-	u32		cur_tsecr;
+	__be32		cur_tsecr;
 	u8		saw_ts;
 };
 

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index b570402..2e9e88b 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c

@@ -326,7 +326,7 @@
 	{ "SiS 191 PCI Gigabit Ethernet adapter" },
 };
 
-static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
+static struct pci_device_id sis190_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
 	{ 0, },

diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 62b0132..889f987 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c

@@ -598,7 +598,7 @@
 	req->cmd.sba_cmd = REQUEST_ALLOCATION ;
 
 	/*
-	 * set the parameter type and parameter lenght of all used
+	 * set the parameter type and parameter length of all used
 	 * parameters
 	 */
 

diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a45205d..76dc8ad 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c

@@ -398,7 +398,7 @@
 /* u_long td;		 transmit descriptor */
 /* struct fddi_mac *mac; mac frame pointer */
 /* unsigned off;	 start address within buffer memory */
-/* int len ;		 lenght of the frame including the FC */
+/* int len ;		 length of the frame including the FC */
 {
 	int	i ;
 	u_int	*p ;

diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c
index 8a430a3..46e3393 100644
--- a/drivers/net/skfp/hwmtm.c
+++ b/drivers/net/skfp/hwmtm.c

@@ -1185,7 +1185,7 @@
 
 		DB_RX("frame length = %d",len,0,4) ;
 		/*
-		 * check the frame_lenght and all error flags
+		 * check the frame_length and all error flags
 		 */
 		if (rfsw & (RX_MSRABT|RX_FS_E|RX_FS_CRC|RX_FS_IMPL)){
 			if (rfsw & RD_S_MSRABT) {

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 626190e..dc06236 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c

@@ -623,6 +623,7 @@
 	static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
 	static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	/* Turn on/off phy power saving */
 	if (onoff)
@@ -634,7 +635,8 @@
 		reg1 |= coma_mode[port];
 
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+	sky2_pci_read32(hw, PCI_DEV_REG1);
 
 	udelay(100);
 }
@@ -1422,6 +1424,7 @@
 	imask |= portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
+	sky2_set_multicast(dev);
 	return 0;
 
 err_out:
@@ -2436,6 +2439,7 @@
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2443,12 +2447,14 @@
 
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
@@ -2456,6 +2462,7 @@
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2831,6 +2838,7 @@
 	}
 
 	sky2_power_on(hw);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -3554,8 +3562,6 @@
 		err = sky2_up(dev);
 		if (err)
 			dev_close(dev);
-		else
-			sky2_set_multicast(dev);
 	}
 
 	return err;
@@ -4389,8 +4395,6 @@
 				dev_close(dev);
 				goto out;
 			}
-
-			sky2_set_multicast(dev);
 		}
 	}
 

diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index fe3ac6f..0e4a88d 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c

@@ -1075,7 +1075,7 @@
 	.get_link		= bigmac_get_link,
 };
 
-static int __init bigmac_ether_init(struct sbus_dev *qec_sdev)
+static int __devinit bigmac_ether_init(struct sbus_dev *qec_sdev)
 {
 	struct net_device *dev;
 	static int version_printed;

diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index ff23c64..e811331 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c

@@ -747,7 +747,7 @@
 		    qecp->gregs + GLOB_RSIZE);
 }
 
-static u8 __init qec_get_burst(struct device_node *dp)
+static u8 __devinit qec_get_burst(struct device_node *dp)
 {
 	u8 bsizes, bsizes_more;
 
@@ -767,7 +767,7 @@
 	return bsizes;
 }
 
-static struct sunqec * __init get_qec(struct sbus_dev *child_sdev)
+static struct sunqec * __devinit get_qec(struct sbus_dev *child_sdev)
 {
 	struct sbus_dev *qec_sdev = child_sdev->parent;
 	struct sunqec *qecp;
@@ -823,7 +823,7 @@
 	return NULL;
 }
 
-static int __init qec_ether_init(struct sbus_dev *sdev)
+static int __devinit qec_ether_init(struct sbus_dev *sdev)
 {
 	static unsigned version_printed;
 	struct net_device *dev;

diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index 4a0035f..6415ce1 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c

@@ -1130,7 +1130,7 @@
 	.handshake_complete	= vnet_handshake_complete,
 };
 
-static void print_version(void)
+static void __devinit print_version(void)
 {
 	static int version_printed;
 

diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 124cfd4..7a7de04 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c

@@ -10,7 +10,7 @@
  *      - Madge Smart 16/4 PCI Mk2
  *
  *  Maintainer(s):
- *    AF	Adam Fritzler		mid@auk.cx
+ *    AF	Adam Fritzler
  *
  *  Modification History:
  *	30-Dec-99	AF	Split off from the tms380tr driver.

diff --git a/drivers/net/tokenring/abyss.h b/drivers/net/tokenring/abyss.h
index 0ee6e4f..b0a473b 100644
--- a/drivers/net/tokenring/abyss.h
+++ b/drivers/net/tokenring/abyss.h

@@ -2,7 +2,7 @@
  * abyss.h: Header for the abyss tms380tr module
  *
  * Authors:
- * - Adam Fritzler <mid@auk.cx>
+ * - Adam Fritzler
  */
 
 #ifndef __LINUX_MADGETR_H

diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 5a41513..c9c5a2b 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c

@@ -11,7 +11,7 @@
  *	- Madge Smart 16/4 Ringnode MC32 (??)
  *
  *  Maintainer(s):
- *    AF	Adam Fritzler		mid@auk.cx
+ *    AF	Adam Fritzler
  *
  *  Modification History:
  *	16-Jan-00	AF	Created

diff --git a/drivers/net/tokenring/madgemc.h b/drivers/net/tokenring/madgemc.h
index 2dd8222..fe88e27 100644
--- a/drivers/net/tokenring/madgemc.h
+++ b/drivers/net/tokenring/madgemc.h

@@ -2,7 +2,7 @@
  * madgemc.h: Header for the madgemc tms380tr module
  *
  * Authors:
- * - Adam Fritzler <mid@auk.cx>
+ * - Adam Fritzler
  */
 
 #ifndef __LINUX_MADGEMC_H

diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index e7b4adc..433c994 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c

@@ -434,7 +434,7 @@
 
 }
 
-static int olympic_open(struct net_device *dev) 
+static int __devinit olympic_open(struct net_device *dev) 
 {
 	struct olympic_private *olympic_priv=netdev_priv(dev);
 	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;

diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index ca6b659..00ea945 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c

@@ -12,7 +12,7 @@
  *	- Proteon 1392, 1392+
  *
  *  Maintainer(s):
- *    AF        Adam Fritzler           mid@auk.cx
+ *    AF        Adam Fritzler
  *    JF	Jochen Friedrich	jochen@scram.de
  *
  *  Modification History:

diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index 32e8d5a..41b6999 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c

@@ -13,7 +13,7 @@
  *	- SysKonnect TR4/16(+) ISA	(SK-4190)
  *
  *  Maintainer(s):
- *    AF        Adam Fritzler           mid@auk.cx
+ *    AF        Adam Fritzler
  *    JF	Jochen Friedrich	jochen@scram.de
  *
  *  Modification History:

diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index d5fa36d..d07c452 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c

@@ -30,7 +30,7 @@
  *  Maintainer(s):
  *    JS	Jay Schulist		jschlst@samba.org
  *    CG	Christoph Goos		cgoos@syskonnect.de
- *    AF	Adam Fritzler		mid@auk.cx
+ *    AF	Adam Fritzler
  *    MLP       Mike Phillips           phillim@amtrak.com
  *    JF	Jochen Friedrich	jochen@scram.de
  *     

diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 7daf74e..7af76d7 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h

@@ -3,7 +3,7 @@
  *
  * Authors:
  * - Christoph Goos <cgoos@syskonnect.de>
- * - Adam Fritzler <mid@auk.cx>
+ * - Adam Fritzler
  */
 
 #ifndef __LINUX_TMS380TR_H

diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 1c18f78..5f0ee88 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c

@@ -14,7 +14,7 @@
  *      - 3Com 3C339 Token Link Velocity
  *
  *  Maintainer(s):
- *    AF	Adam Fritzler		mid@auk.cx
+ *    AF	Adam Fritzler
  *
  *  Modification History:
  *	30-Dec-99	AF	Split off from the tms380tr driver.

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4ffd873..fba0811 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c

@@ -2084,8 +2084,10 @@
 	if (!ugeth)
 		return;
 
-	if (ugeth->uccf)
+	if (ugeth->uccf) {
 		ucc_fast_free(ugeth->uccf);
+		ugeth->uccf = NULL;
+	}
 
 	if (ugeth->p_thread_data_tx) {
 		qe_muram_free(ugeth->thread_dat_tx_offset);
@@ -2305,10 +2307,6 @@
 	ug_info = ugeth->ug_info;
 	uf_info = &ug_info->uf_info;
 
-	/* Create CQs for hash tables */
-	INIT_LIST_HEAD(&ugeth->group_hash_q);
-	INIT_LIST_HEAD(&ugeth->ind_hash_q);
-
 	if (!((uf_info->bd_mem_part == MEM_PART_SYSTEM) ||
 	      (uf_info->bd_mem_part == MEM_PART_MURAM))) {
 		if (netif_msg_probe(ugeth))
@@ -3668,6 +3666,23 @@
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ucc_netpoll(struct net_device *dev)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	int irq = ugeth->ug_info->uf_info.irq;
+
+	disable_irq(irq);
+	ucc_geth_irq_handler(irq, dev);
+	enable_irq(irq);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
 /* Called when something needs to use the ethernet device */
 /* Returns 0 for success. */
 static int ucc_geth_open(struct net_device *dev)
@@ -3990,6 +4005,10 @@
 	ugeth = netdev_priv(dev);
 	spin_lock_init(&ugeth->lock);
 
+	/* Create CQs for hash tables */
+	INIT_LIST_HEAD(&ugeth->group_hash_q);
+	INIT_LIST_HEAD(&ugeth->ind_hash_q);
+
 	dev_set_drvdata(device, dev);
 
 	/* Set the dev->base_addr to the gfar reg region */
@@ -4006,6 +4025,9 @@
 #ifdef CONFIG_UGETH_NAPI
 	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, UCC_GETH_DEV_WEIGHT);
 #endif				/* CONFIG_UGETH_NAPI */
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ucc_netpoll;
+#endif
 	dev->stop = ucc_geth_close;
 //    dev->change_mtu = ucc_geth_change_mtu;
 	dev->mtu = 1500;
@@ -4040,9 +4062,10 @@
 	struct net_device *dev = dev_get_drvdata(device);
 	struct ucc_geth_private *ugeth = netdev_priv(dev);
 
-	dev_set_drvdata(device, NULL);
-	ucc_geth_memclean(ugeth);
+	unregister_netdev(dev);
 	free_netdev(dev);
+	ucc_geth_memclean(ugeth);
+	dev_set_drvdata(device, NULL);
 
 	return 0;
 }

diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 33cbc30..7e1f001 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c

@@ -926,7 +926,6 @@
 	netdev->set_multicast_list = rtl8150_set_multicast;
 	netdev->set_mac_address = rtl8150_set_mac_address;
 	netdev->get_stats = rtl8150_netdev_stats;
-	netdev->mtu = RTL8150_MTU;
 	SET_ETHTOOL_OPS(netdev, &ops);
 	dev->intr_interval = 100;	/* 100ms */
 

diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 87c180b..7c851b1 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c

@@ -606,7 +606,7 @@
 }
 #endif
 
-static void rhine_hw_init(struct net_device *dev, long pioaddr)
+static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
 {
 	struct rhine_private *rp = netdev_priv(dev);
 

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 35cd65d..8c9fb82 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c

@@ -8,7 +8,6 @@
  * for 64bit hardware platforms.
  *
  * TODO
- *	Big-endian support
  *	rx_copybreak/alignment
  *	Scatter gather
  *	More testing
@@ -681,7 +680,7 @@
 	 *	Init state, all RD entries belong to the NIC
 	 */
 	for (i = 0; i < vptr->options.numrx; ++i)
-		vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
+		vptr->rd_ring[i].rdesc0.len |= OWNED_BY_NIC;
 
 	writew(vptr->options.numrx, &regs->RBRDU);
 	writel(vptr->rd_pool_dma, &regs->RDBaseLo);
@@ -777,7 +776,7 @@
 
 		vptr->int_mask = INT_MASK_DEF;
 
-		writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
+		writel(vptr->rd_pool_dma, &regs->RDBaseLo);
 		writew(vptr->options.numrx - 1, &regs->RDCSize);
 		mac_rx_queue_run(regs);
 		mac_rx_queue_wake(regs);
@@ -785,7 +784,7 @@
 		writew(vptr->options.numtx - 1, &regs->TDCSize);
 
 		for (i = 0; i < vptr->num_txq; i++) {
-			writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
+			writel(vptr->td_pool_dma[i], &regs->TDBaseLo[i]);
 			mac_tx_queue_run(regs, i);
 		}
 
@@ -1195,7 +1194,7 @@
 	dirty = vptr->rd_dirty - unusable;
 	for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
 		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-		vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
+		vptr->rd_ring[dirty].rdesc0.len |= OWNED_BY_NIC;
 	}
 
 	writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
@@ -1210,7 +1209,7 @@
 		struct rx_desc *rd = vptr->rd_ring + dirty;
 
 		/* Fine for an all zero Rx desc at init time as well */
-		if (rd->rdesc0.owner == OWNED_BY_NIC)
+		if (rd->rdesc0.len & OWNED_BY_NIC)
 			break;
 
 		if (!vptr->rd_info[dirty].skb) {
@@ -1413,7 +1412,7 @@
 		if (!vptr->rd_info[rd_curr].skb)
 			break;
 
-		if (rd->rdesc0.owner == OWNED_BY_NIC)
+		if (rd->rdesc0.len & OWNED_BY_NIC)
 			break;
 
 		rmb();
@@ -1421,7 +1420,7 @@
 		/*
 		 *	Don't drop CE or RL error frame although RXOK is off
 		 */
-		if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
+		if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
 			if (velocity_receive_frame(vptr, rd_curr) < 0)
 				stats->rx_dropped++;
 		} else {
@@ -1433,7 +1432,7 @@
 			stats->rx_dropped++;
 		}
 
-		rd->inten = 1;
+		rd->size |= RX_INTEN;
 
 		vptr->dev->last_rx = jiffies;
 
@@ -1554,7 +1553,7 @@
 	struct net_device_stats *stats = &vptr->stats;
 	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
 	struct rx_desc *rd = &(vptr->rd_ring[idx]);
-	int pkt_len = rd->rdesc0.len;
+	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
 	struct sk_buff *skb;
 
 	if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
@@ -1637,8 +1636,7 @@
  	 */
 
 	*((u32 *) & (rd->rdesc0)) = 0;
-	rd->len = cpu_to_le32(vptr->rx_buf_sz);
-	rd->inten = 1;
+	rd->size = cpu_to_le16(vptr->rx_buf_sz) | RX_INTEN;
 	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
 	rd->pa_high = 0;
 	return 0;
@@ -1674,7 +1672,7 @@
 			td = &(vptr->td_rings[qnum][idx]);
 			tdinfo = &(vptr->td_infos[qnum][idx]);
 
-			if (td->tdesc0.owner == OWNED_BY_NIC)
+			if (td->tdesc0.len & OWNED_BY_NIC)
 				break;
 
 			if ((works++ > 15))
@@ -1874,7 +1872,7 @@
 
 		for (i = 0; i < tdinfo->nskb_dma; i++) {
 #ifdef VELOCITY_ZERO_COPY_SUPPORT
-			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], td->tdesc1.len, PCI_DMA_TODEVICE);
+			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
 #else
 			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE);
 #endif
@@ -2067,8 +2065,8 @@
 	struct velocity_td_info *tdinfo;
 	unsigned long flags;
 	int index;
-
 	int pktlen = skb->len;
+	__le16 len = cpu_to_le16(pktlen);
 
 #ifdef VELOCITY_ZERO_COPY_SUPPORT
 	if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
@@ -2083,9 +2081,8 @@
 	td_ptr = &(vptr->td_rings[qnum][index]);
 	tdinfo = &(vptr->td_infos[qnum][index]);
 
-	td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
 	td_ptr->tdesc1.TCR = TCR0_TIC;
-	td_ptr->td_buf[0].queue = 0;
+	td_ptr->td_buf[0].size &= ~TD_QUEUE;
 
 	/*
 	 *	Pad short frames.
@@ -2093,16 +2090,16 @@
 	if (pktlen < ETH_ZLEN) {
 		/* Cannot occur until ZC support */
 		pktlen = ETH_ZLEN;
+		len = cpu_to_le16(ETH_ZLEN);
 		skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
 		memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
 		tdinfo->skb = skb;
 		tdinfo->skb_dma[0] = tdinfo->buf_dma;
-		td_ptr->tdesc0.pktsize = pktlen;
+		td_ptr->tdesc0.len = len;
 		td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
 		td_ptr->td_buf[0].pa_high = 0;
-		td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
+		td_ptr->td_buf[0].size = len;	/* queue is 0 anyway */
 		tdinfo->nskb_dma = 1;
-		td_ptr->tdesc1.CMDZ = 2;
 	} else
 #ifdef VELOCITY_ZERO_COPY_SUPPORT
 	if (skb_shinfo(skb)->nr_frags > 0) {
@@ -2111,36 +2108,35 @@
 		if (nfrags > 6) {
 			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
 			tdinfo->skb_dma[0] = tdinfo->buf_dma;
-			td_ptr->tdesc0.pktsize =
+			td_ptr->tdesc0.len = len;
 			td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
 			td_ptr->td_buf[0].pa_high = 0;
-			td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
+			td_ptr->td_buf[0].size = len;	/* queue is 0 anyway */
 			tdinfo->nskb_dma = 1;
-			td_ptr->tdesc1.CMDZ = 2;
 		} else {
 			int i = 0;
 			tdinfo->nskb_dma = 0;
-			tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data, skb->len - skb->data_len, PCI_DMA_TODEVICE);
+			tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data,
+						skb_headlen(skb), PCI_DMA_TODEVICE);
 
-			td_ptr->tdesc0.pktsize = pktlen;
+			td_ptr->tdesc0.len = len;
 
 			/* FIXME: support 48bit DMA later */
 			td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
 			td_ptr->td_buf[i].pa_high = 0;
-			td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
+			td_ptr->td_buf[i].size = cpu_to_le16(skb_headlen(skb));
 
 			for (i = 0; i < nfrags; i++) {
 				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-				void *addr = ((void *) page_address(frag->page + frag->page_offset));
+				void *addr = (void *)page_address(frag->page) + frag->page_offset;
 
 				tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
 
 				td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
 				td_ptr->td_buf[i + 1].pa_high = 0;
-				td_ptr->td_buf[i + 1].bufsize = frag->size;
+				td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
 			}
 			tdinfo->nskb_dma = i - 1;
-			td_ptr->tdesc1.CMDZ = i;
 		}
 
 	} else
@@ -2152,18 +2148,16 @@
 		 */
 		tdinfo->skb = skb;
 		tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-		td_ptr->tdesc0.pktsize = pktlen;
+		td_ptr->tdesc0.len = len;
 		td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
 		td_ptr->td_buf[0].pa_high = 0;
-		td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
+		td_ptr->td_buf[0].size = len;
 		tdinfo->nskb_dma = 1;
-		td_ptr->tdesc1.CMDZ = 2;
 	}
+	td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
 
 	if (vptr->vlgrp && vlan_tx_tag_present(skb)) {
-		td_ptr->tdesc1.pqinf.VID = vlan_tx_tag_get(skb);
-		td_ptr->tdesc1.pqinf.priority = 0;
-		td_ptr->tdesc1.pqinf.CFI = 0;
+		td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb));
 		td_ptr->tdesc1.TCR |= TCR0_VETAG;
 	}
 
@@ -2185,7 +2179,7 @@
 
 		if (prev < 0)
 			prev = vptr->options.numtx - 1;
-		td_ptr->tdesc0.owner = OWNED_BY_NIC;
+		td_ptr->tdesc0.len |= OWNED_BY_NIC;
 		vptr->td_used[qnum]++;
 		vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
 
@@ -2193,7 +2187,7 @@
 			netif_stop_queue(dev);
 
 		td_ptr = &(vptr->td_rings[qnum][prev]);
-		td_ptr->td_buf[0].queue = 1;
+		td_ptr->td_buf[0].size |= TD_QUEUE;
 		mac_tx_queue_wake(vptr->mac_regs, qnum);
 	}
 	dev->trans_start = jiffies;
@@ -3410,7 +3404,7 @@
 		velocity_save_context(vptr, &vptr->context);
 		velocity_shutdown(vptr);
 		velocity_set_wol(vptr);
-		pci_enable_wake(pdev, 3, 1);
+		pci_enable_wake(pdev, PCI_D3hot, 1);
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		velocity_save_context(vptr, &vptr->context);

diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index aa91796..7387be4 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h

@@ -70,40 +70,27 @@
  * Bits in the RSR0 register
  */
 
-#define RSR_DETAG          0x0080
-#define RSR_SNTAG          0x0040
-#define RSR_RXER           0x0020
-#define RSR_RL             0x0010
-#define RSR_CE             0x0008
-#define RSR_FAE            0x0004
-#define RSR_CRC            0x0002
-#define RSR_VIDM           0x0001
+#define RSR_DETAG	cpu_to_le16(0x0080)
+#define RSR_SNTAG	cpu_to_le16(0x0040)
+#define RSR_RXER	cpu_to_le16(0x0020)
+#define RSR_RL		cpu_to_le16(0x0010)
+#define RSR_CE		cpu_to_le16(0x0008)
+#define RSR_FAE		cpu_to_le16(0x0004)
+#define RSR_CRC		cpu_to_le16(0x0002)
+#define RSR_VIDM	cpu_to_le16(0x0001)
 
 /*
  * Bits in the RSR1 register
  */
 
-#define RSR_RXOK           0x8000	// rx OK
-#define RSR_PFT            0x4000	// Perfect filtering address match
-#define RSR_MAR            0x2000	// MAC accept multicast address packet
-#define RSR_BAR            0x1000	// MAC accept broadcast address packet
-#define RSR_PHY            0x0800	// MAC accept physical address packet
-#define RSR_VTAG           0x0400	// 802.1p/1q tagging packet indicator
-#define RSR_STP            0x0200	// start of packet
-#define RSR_EDP            0x0100	// end of packet
-
-/*
- * Bits in the RSR1 register
- */
-
-#define RSR1_RXOK           0x80	// rx OK
-#define RSR1_PFT            0x40	// Perfect filtering address match
-#define RSR1_MAR            0x20	// MAC accept multicast address packet
-#define RSR1_BAR            0x10	// MAC accept broadcast address packet
-#define RSR1_PHY            0x08	// MAC accept physical address packet
-#define RSR1_VTAG           0x04	// 802.1p/1q tagging packet indicator
-#define RSR1_STP            0x02	// start of packet
-#define RSR1_EDP            0x01	// end of packet
+#define RSR_RXOK	cpu_to_le16(0x8000) // rx OK
+#define RSR_PFT		cpu_to_le16(0x4000) // Perfect filtering address match
+#define RSR_MAR		cpu_to_le16(0x2000) // MAC accept multicast address packet
+#define RSR_BAR		cpu_to_le16(0x1000) // MAC accept broadcast address packet
+#define RSR_PHY		cpu_to_le16(0x0800) // MAC accept physical address packet
+#define RSR_VTAG	cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator
+#define RSR_STP		cpu_to_le16(0x0200) // start of packet
+#define RSR_EDP		cpu_to_le16(0x0100) // end of packet
 
 /*
  * Bits in the CSM register
@@ -120,33 +107,21 @@
  * Bits in the TSR0 register
  */
 
-#define TSR0_ABT            0x0080	// Tx abort because of excessive collision
-#define TSR0_OWT            0x0040	// Jumbo frame Tx abort
-#define TSR0_OWC            0x0020	// Out of window collision
-#define TSR0_COLS           0x0010	// experience collision in this transmit event
-#define TSR0_NCR3           0x0008	// collision retry counter[3]
-#define TSR0_NCR2           0x0004	// collision retry counter[2]
-#define TSR0_NCR1           0x0002	// collision retry counter[1]
-#define TSR0_NCR0           0x0001	// collision retry counter[0]
-#define TSR0_TERR           0x8000	//
-#define TSR0_FDX            0x4000	// current transaction is serviced by full duplex mode
-#define TSR0_GMII           0x2000	// current transaction is serviced by GMII mode
-#define TSR0_LNKFL          0x1000	// packet serviced during link down
-#define TSR0_SHDN           0x0400	// shutdown case
-#define TSR0_CRS            0x0200	// carrier sense lost
-#define TSR0_CDH            0x0100	// AQE test fail (CD heartbeat)
-
-/*
- * Bits in the TSR1 register
- */
-
-#define TSR1_TERR           0x80	//
-#define TSR1_FDX            0x40	// current transaction is serviced by full duplex mode
-#define TSR1_GMII           0x20	// current transaction is serviced by GMII mode
-#define TSR1_LNKFL          0x10	// packet serviced during link down
-#define TSR1_SHDN           0x04	// shutdown case
-#define TSR1_CRS            0x02	// carrier sense lost
-#define TSR1_CDH            0x01	// AQE test fail (CD heartbeat)
+#define TSR0_ABT	cpu_to_le16(0x0080) // Tx abort because of excessive collision
+#define TSR0_OWT	cpu_to_le16(0x0040) // Jumbo frame Tx abort
+#define TSR0_OWC	cpu_to_le16(0x0020) // Out of window collision
+#define TSR0_COLS	cpu_to_le16(0x0010) // experience collision in this transmit event
+#define TSR0_NCR3	cpu_to_le16(0x0008) // collision retry counter[3]
+#define TSR0_NCR2	cpu_to_le16(0x0004) // collision retry counter[2]
+#define TSR0_NCR1	cpu_to_le16(0x0002) // collision retry counter[1]
+#define TSR0_NCR0	cpu_to_le16(0x0001) // collision retry counter[0]
+#define TSR0_TERR	cpu_to_le16(0x8000) //
+#define TSR0_FDX	cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode
+#define TSR0_GMII	cpu_to_le16(0x2000) // current transaction is serviced by GMII mode
+#define TSR0_LNKFL	cpu_to_le16(0x1000) // packet serviced during link down
+#define TSR0_SHDN	cpu_to_le16(0x0400) // shutdown case
+#define TSR0_CRS	cpu_to_le16(0x0200) // carrier sense lost
+#define TSR0_CDH	cpu_to_le16(0x0100) // AQE test fail (CD heartbeat)
 
 //
 // Bits in the TCR0 register
@@ -197,25 +172,26 @@
  */
 
 struct rdesc0 {
-	u16 RSR;		/* Receive status */
-	u16 len:14;		/* Received packet length */
-	u16 reserved:1;
-	u16 owner:1;		/* Who owns this buffer ? */
+	__le16 RSR;		/* Receive status */
+	__le16 len;		/* bits 0--13; bit 15 - owner */
 };
 
 struct rdesc1 {
-	u16 PQTAG;
+	__le16 PQTAG;
 	u8 CSM;
 	u8 IPKT;
 };
 
+enum {
+	RX_INTEN = __constant_cpu_to_le16(0x8000)
+};
+
 struct rx_desc {
 	struct rdesc0 rdesc0;
 	struct rdesc1 rdesc1;
-	u32 pa_low;		/* Low 32 bit PCI address */
-	u16 pa_high;		/* Next 16 bit PCI address (48 total) */
-	u16 len:15;		/* Frame size */
-	u16 inten:1;		/* Enable interrupt */
+	__le32 pa_low;		/* Low 32 bit PCI address */
+	__le16 pa_high;		/* Next 16 bit PCI address (48 total) */
+	__le16 size;		/* bits 0--14 - frame size, bit 15 - enable int. */
 } __attribute__ ((__packed__));
 
 /*
@@ -223,32 +199,24 @@
  */
 
 struct tdesc0 {
-	u16 TSR;		/* Transmit status register */
-	u16 pktsize:14;		/* Size of frame */
-	u16 reserved:1;
-	u16 owner:1;		/* Who owns the buffer */
+	__le16 TSR;		/* Transmit status register */
+	__le16 len;		/* bits 0--13 - size of frame, bit 15 - owner */
 };
 
-struct pqinf {			/* Priority queue info */
-	u16 VID:12;
-	u16 CFI:1;
-	u16 priority:3;
+struct tdesc1 {
+	__le16 vlan;
+	u8 TCR;
+	u8 cmd;			/* bits 0--1 - TCPLS, bits 4--7 - CMDZ */
 } __attribute__ ((__packed__));
 
-struct tdesc1 {
-	struct pqinf pqinf;
-	u8 TCR;
-	u8 TCPLS:2;
-	u8 reserved:2;
-	u8 CMDZ:4;
-} __attribute__ ((__packed__));
+enum {
+	TD_QUEUE = __constant_cpu_to_le16(0x8000)
+};
 
 struct td_buf {
-	u32 pa_low;
-	u16 pa_high;
-	u16 bufsize:14;
-	u16 reserved:1;
-	u16 queue:1;
+	__le32 pa_low;
+	__le16 pa_high;
+	__le16 size;		/* bits 0--13 - size, bit 15 - queue */
 } __attribute__ ((__packed__));
 
 struct tx_desc {
@@ -276,7 +244,7 @@
 
 enum  velocity_owner {
 	OWNED_BY_HOST = 0,
-	OWNED_BY_NIC = 1
+	OWNED_BY_NIC = __constant_cpu_to_le16(0x8000)
 };
 
 
@@ -1012,45 +980,45 @@
 	volatile u8 RCR;
 	volatile u8 TCR;
 
-	volatile u32 CR0Set;		/* 0x08 */
-	volatile u32 CR0Clr;		/* 0x0C */
+	volatile __le32 CR0Set;		/* 0x08 */
+	volatile __le32 CR0Clr;		/* 0x0C */
 
 	volatile u8 MARCAM[8];		/* 0x10 */
 
-	volatile u32 DecBaseHi;		/* 0x18 */
-	volatile u16 DbfBaseHi;		/* 0x1C */
-	volatile u16 reserved_1E;
+	volatile __le32 DecBaseHi;	/* 0x18 */
+	volatile __le16 DbfBaseHi;	/* 0x1C */
+	volatile __le16 reserved_1E;
 
-	volatile u16 ISRCTL;		/* 0x20 */
+	volatile __le16 ISRCTL;		/* 0x20 */
 	volatile u8 TXESR;
 	volatile u8 RXESR;
 
-	volatile u32 ISR;		/* 0x24 */
-	volatile u32 IMR;
+	volatile __le32 ISR;		/* 0x24 */
+	volatile __le32 IMR;
 
-	volatile u32 TDStatusPort;	/* 0x2C */
+	volatile __le32 TDStatusPort;	/* 0x2C */
 
-	volatile u16 TDCSRSet;		/* 0x30 */
+	volatile __le16 TDCSRSet;	/* 0x30 */
 	volatile u8 RDCSRSet;
 	volatile u8 reserved_33;
-	volatile u16 TDCSRClr;
+	volatile __le16 TDCSRClr;
 	volatile u8 RDCSRClr;
 	volatile u8 reserved_37;
 
-	volatile u32 RDBaseLo;		/* 0x38 */
-	volatile u16 RDIdx;		/* 0x3C */
-	volatile u16 reserved_3E;
+	volatile __le32 RDBaseLo;	/* 0x38 */
+	volatile __le16 RDIdx;		/* 0x3C */
+	volatile __le16 reserved_3E;
 
-	volatile u32 TDBaseLo[4];	/* 0x40 */
+	volatile __le32 TDBaseLo[4];	/* 0x40 */
 
-	volatile u16 RDCSize;		/* 0x50 */
-	volatile u16 TDCSize;		/* 0x52 */
-	volatile u16 TDIdx[4];		/* 0x54 */
-	volatile u16 tx_pause_timer;	/* 0x5C */
-	volatile u16 RBRDU;		/* 0x5E */
+	volatile __le16 RDCSize;	/* 0x50 */
+	volatile __le16 TDCSize;	/* 0x52 */
+	volatile __le16 TDIdx[4];	/* 0x54 */
+	volatile __le16 tx_pause_timer;	/* 0x5C */
+	volatile __le16 RBRDU;		/* 0x5E */
 
-	volatile u32 FIFOTest0;		/* 0x60 */
-	volatile u32 FIFOTest1;		/* 0x64 */
+	volatile __le32 FIFOTest0;	/* 0x60 */
+	volatile __le32 FIFOTest1;	/* 0x64 */
 
 	volatile u8 CAMADDR;		/* 0x68 */
 	volatile u8 CAMCR;		/* 0x69 */
@@ -1063,18 +1031,18 @@
 	volatile u8 PHYSR1;
 	volatile u8 MIICR;
 	volatile u8 MIIADR;
-	volatile u16 MIIDATA;
+	volatile __le16 MIIDATA;
 
-	volatile u16 SoftTimer0;	/* 0x74 */
-	volatile u16 SoftTimer1;
+	volatile __le16 SoftTimer0;	/* 0x74 */
+	volatile __le16 SoftTimer1;
 
 	volatile u8 CFGA;		/* 0x78 */
 	volatile u8 CFGB;
 	volatile u8 CFGC;
 	volatile u8 CFGD;
 
-	volatile u16 DCFG;		/* 0x7C */
-	volatile u16 MCFG;
+	volatile __le16 DCFG;		/* 0x7C */
+	volatile __le16 MCFG;
 
 	volatile u8 TBIST;		/* 0x80 */
 	volatile u8 RBIST;
@@ -1086,9 +1054,9 @@
 	volatile u8 rev_id;
 	volatile u8 PORSTS;
 
-	volatile u32 MIBData;		/* 0x88 */
+	volatile __le32 MIBData;	/* 0x88 */
 
-	volatile u16 EEWrData;
+	volatile __le16 EEWrData;
 
 	volatile u8 reserved_8E;
 	volatile u8 BPMDWr;
@@ -1098,7 +1066,7 @@
 	volatile u8 EECHKSUM;		/* 0x92 */
 	volatile u8 EECSR;
 
-	volatile u16 EERdData;		/* 0x94 */
+	volatile __le16 EERdData;	/* 0x94 */
 	volatile u8 EADDR;
 	volatile u8 EMBCMD;
 
@@ -1112,22 +1080,22 @@
 	volatile u8 DEBUG;
 	volatile u8 CHIPGCR;
 
-	volatile u16 WOLCRSet;		/* 0xA0 */
+	volatile __le16 WOLCRSet;	/* 0xA0 */
 	volatile u8 PWCFGSet;
 	volatile u8 WOLCFGSet;
 
-	volatile u16 WOLCRClr;		/* 0xA4 */
+	volatile __le16 WOLCRClr;	/* 0xA4 */
 	volatile u8 PWCFGCLR;
 	volatile u8 WOLCFGClr;
 
-	volatile u16 WOLSRSet;		/* 0xA8 */
-	volatile u16 reserved_AA;
+	volatile __le16 WOLSRSet;	/* 0xA8 */
+	volatile __le16 reserved_AA;
 
-	volatile u16 WOLSRClr;		/* 0xAC */
-	volatile u16 reserved_AE;
+	volatile __le16 WOLSRClr;	/* 0xAC */
+	volatile __le16 reserved_AE;
 
-	volatile u16 PatternCRC[8];	/* 0xB0 */
-	volatile u32 ByteMask[4][4];	/* 0xC0 */
+	volatile __le16 PatternCRC[8];	/* 0xB0 */
+	volatile __le32 ByteMask[4][4];	/* 0xC0 */
 } __attribute__ ((__packed__));
 
 
@@ -1238,12 +1206,12 @@
 struct arp_packet {
 	u8 dest_mac[ETH_ALEN];
 	u8 src_mac[ETH_ALEN];
-	u16 type;
-	u16 ar_hrd;
-	u16 ar_pro;
+	__be16 type;
+	__be16 ar_hrd;
+	__be16 ar_pro;
 	u8 ar_hln;
 	u8 ar_pln;
-	u16 ar_op;
+	__be16 ar_op;
 	u8 ar_sha[ETH_ALEN];
 	u8 ar_sip[4];
 	u8 ar_tha[ETH_ALEN];
@@ -1253,7 +1221,7 @@
 struct _magic_packet {
 	u8 dest_mac[6];
 	u8 src_mac[6];
-	u16 type;
+	__be16 type;
 	u8 MAC[16][6];
 	u8 password[6];
 } __attribute__ ((__packed__));

diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index d347d59..d14e667 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c

@@ -322,7 +322,7 @@
 	void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
 	u32 i;
 
-	/* boot buffer lenght */
+	/* boot buffer length */
 	writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
 	writew(GEN_DEFPAR, pt_boot_cmd);
 
@@ -353,7 +353,7 @@
 	void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
 	u32 i;
 
-	/* boot buffer lenght */
+	/* boot buffer length */
 	writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
 	writew(GEN_DEFPAR, pt_boot_cmd);
 

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index d6599d2..ddc8714 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c

@@ -153,7 +153,7 @@
 #define ath5k_pci_resume NULL
 #endif /* CONFIG_PM */
 
-static struct pci_driver ath5k_pci_drv_id = {
+static struct pci_driver ath5k_pci_driver = {
 	.name		= "ath5k_pci",
 	.id_table	= ath5k_pci_id_table,
 	.probe		= ath5k_pci_probe,
@@ -329,7 +329,7 @@
 
 	ath5k_debug_init();
 
-	ret = pci_register_driver(&ath5k_pci_drv_id);
+	ret = pci_register_driver(&ath5k_pci_driver);
 	if (ret) {
 		printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
 		return ret;
@@ -341,7 +341,7 @@
 static void __exit
 exit_ath5k_pci(void)
 {
-	pci_unregister_driver(&ath5k_pci_drv_id);
+	pci_unregister_driver(&ath5k_pci_driver);
 
 	ath5k_debug_finish();
 }

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 4fdeb53..8d4d91d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c

@@ -238,9 +238,10 @@
 	priv->last_statistics_time = jiffies;
 }
 
-void iwl3945_add_radiotap(struct iwl3945_priv *priv, struct sk_buff *skb,
-			  struct iwl3945_rx_frame_hdr *rx_hdr,
-			  struct ieee80211_rx_status *stats)
+static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
+				 struct sk_buff *skb,
+				 struct iwl3945_rx_frame_hdr *rx_hdr,
+				 struct ieee80211_rx_status *stats)
 {
 	/* First cache any information we need before we overwrite
 	 * the information provided in the skb from the hardware */

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 569347f..d727de8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -4658,17 +4658,30 @@
 				struct ieee80211_ht_info *sta_ht_inf)
 {
 	__le32 sta_flags;
+	u8 mimo_ps_mode;
 
 	if (!sta_ht_inf || !sta_ht_inf->ht_supported)
 		goto done;
 
+	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2;
+
 	sta_flags = priv->stations[index].sta.station_flags;
 
-	if (((sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS >> 2))
-						== IWL_MIMO_PS_DYNAMIC)
+	sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
+
+	switch (mimo_ps_mode) {
+	case WLAN_HT_CAP_MIMO_PS_STATIC:
+		sta_flags |= STA_FLG_MIMO_DIS_MSK;
+		break;
+	case WLAN_HT_CAP_MIMO_PS_DYNAMIC:
 		sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
-	else
-		sta_flags &= ~STA_FLG_RTS_MIMO_PROT_MSK;
+		break;
+	case WLAN_HT_CAP_MIMO_PS_DISABLED:
+		break;
+	default:
+		IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+		break;
+	}
 
 	sta_flags |= cpu_to_le32(
 	      (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
@@ -4679,7 +4692,7 @@
 	if (iwl4965_is_fat_tx_allowed(priv, sta_ht_inf))
 		sta_flags |= STA_FLG_FAT_EN_MSK;
 	else
-		sta_flags &= (~STA_FLG_FAT_EN_MSK);
+		sta_flags &= ~STA_FLG_FAT_EN_MSK;
 
 	priv->stations[index].sta.station_flags = sta_flags;
  done:

diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index cb009f4..8993cca 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h

@@ -147,9 +147,6 @@
 
 #define QOS_CONTROL_LEN 2
 
-#define IEEE80211_STYPE_BACK_REQ	0x0080
-#define IEEE80211_STYPE_BACK		0x0090
-
 
 static inline int ieee80211_is_management(u16 fc)
 {

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 33239f1..f55c757 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -6330,6 +6330,11 @@
 		return -ENODEV;
 	}
 
+	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
+		IWL_ERROR("ucode not available for device bringup\n");
+		return -EIO;
+	}
+
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl3945_read32(priv, CSR_GP_CNTRL) &
 				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
@@ -6342,11 +6347,6 @@
 		}
 	}
 
-	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
-		IWL_ERROR("ucode not available for device bringup\n");
-		return -EIO;
-	}
-
 	iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
 
 	rc = iwl3945_hw_nic_init(priv);

diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index bf3a60c..f423241 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c

@@ -6755,6 +6755,11 @@
 		return -ENODEV;
 	}
 
+	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
+		IWL_ERROR("ucode not available for device bringup\n");
+		return -EIO;
+	}
+
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl4965_read32(priv, CSR_GP_CNTRL) &
 				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
@@ -6767,11 +6772,6 @@
 		}
 	}
 
-	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
-		IWL_ERROR("ucode not available for device bringup\n");
-		return -EIO;
-	}
-
 	iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
 
 	rc = iwl4965_hw_nic_init(priv);

diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 9a61188..69f94c9 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c

@@ -1473,7 +1473,7 @@
  *  Called via lbs_prepare_and_send_command(priv, CMD_802_11_SCAN, ...)
  *  from cmd.c
  *
- *  Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ *  Sends a fixed length data part (specifying the BSS type and BSSID filters)
  *  as well as a variable number/length of TLVs to the firmware.
  *
  *  @param priv       A pointer to struct lbs_private structure

diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c
index e503c9c..f4076ae 100644
--- a/drivers/nubus/nubus.c
+++ b/drivers/nubus/nubus.c

@@ -352,7 +352,7 @@
    resource blocks. */
 
 /* FIXME: A lot of this stuff will eventually be useful after
-   initializaton, for intelligently probing Ethernet and video chips,
+   initialization, for intelligently probing Ethernet and video chips,
    among other things.  The rest of it should go in the /proc code.
    For now, we just use it to give verbose boot logs. */
 

diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 7c60cbd..ca52307 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c

@@ -363,7 +363,7 @@
 	if (pages_needed <= 8) {
 		/*
 		 * LAN traffic will not thrash the TLB IFF the same NIC
-		 * uses 8 adjacent pages to map seperate payload data.
+		 * uses 8 adjacent pages to map separate payload data.
 		 * ie the same byte in the resource bit map.
 		 */
 #if 0
@@ -1589,7 +1589,7 @@
 }
 
 /**
- * ccio_init - ccio initalization procedure.
+ * ccio_init - ccio initialization procedure.
  *
  * Register this driver.
  */

diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index a728a7c..65eee67 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c

@@ -95,7 +95,7 @@
 };
 
 /**
- * hppb_init - HP-PB bus initalization procedure.
+ * hppb_init - HP-PB bus initialization procedure.
  *
  * Register this driver.   
  */

diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index 853a15f..cd565bb 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c

@@ -163,7 +163,7 @@
 	idlens[1] = idlens[0]+2;
 	if (belen != lelen) {
 		int off = 2;
-		/* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */
+		/* Don't try lengths of 0x100 and 0x200 as 1 and 2 */
 		if (idlens[0] <= 2)
 			off = 0;
 		idlens[off] = max(belen, lelen);

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f697f3d..9f04d17 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile

@@ -13,6 +13,9 @@
 
 # Build the PCI Hotplug drivers if we were asked to
 obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
+ifdef CONFIG_HOTPLUG_PCI
+obj-y += hotplug-pci.o
+endif
 
 # Build the PCI MSI interrupt support
 obj-$(CONFIG_PCI_MSI) += msi.o

diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c
new file mode 100644
index 0000000..a590ef6
--- /dev/null
+++ b/drivers/pci/hotplug-pci.c

@@ -0,0 +1,20 @@
+/* Core PCI functionality used only by PCI hotplug */
+
+#include <linux/pci.h>
+#include "pci.h"
+
+
+unsigned int pci_do_scan_bus(struct pci_bus *bus)
+{
+	unsigned int max;
+
+	max = pci_scan_child_bus(bus);
+
+	/*
+	 * Make the discovered devices available.
+	 */
+	pci_bus_add_devices(bus);
+
+	return max;
+}
+EXPORT_SYMBOL(pci_do_scan_bus);

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index abf4203..8dcf145 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c

@@ -21,7 +21,6 @@
 #include <linux/topology.h>
 #include <linux/mm.h>
 #include <linux/capability.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 static int sysfs_initialized;	/* = 0 */
@@ -651,8 +650,6 @@
 	if (pcibios_add_platform_entries(pdev))
 		goto err_rom_file;
 
-	pcie_aspm_create_sysfs_dev_files(pdev);
-
 	return 0;
 
 err_rom_file:
@@ -682,8 +679,6 @@
 	if (!sysfs_initialized)
 		return;
 
-	pcie_aspm_remove_sysfs_dev_files(pdev);
-
 	if (pdev->cfg_size < 4096)
 		sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr);
 	else

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b3e9294..04aac77 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c

@@ -18,7 +18,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/log2.h>
-#include <linux/aspm.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
@@ -520,9 +519,6 @@
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
-
 	return 0;
 }
 

diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 60104cf..287a931 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig

@@ -26,23 +26,3 @@
 	  When in doubt, say N.
 
 source "drivers/pci/pcie/aer/Kconfig"
-
-#
-# PCI Express ASPM
-#
-config PCIEASPM
-	bool "PCI Express ASPM support(Experimental)"
-	depends on PCI && EXPERIMENTAL
-	default y
-	help
-	  This enables PCI Express ASPM (Active State Power Management) and
-	  Clock Power Management. ASPM supports state L0/L0s/L1.
-
-	  When in doubt, say N.
-config PCIEASPM_DEBUG
-	bool "Debug PCI Express ASPM"
-	depends on PCIEASPM
-	default n
-	help
-	  This enables PCI Express ASPM debug support. It will add per-device
-	  interface to control ASPM.

diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 11f6bb1..e00fb99 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile

@@ -2,9 +2,6 @@
 # Makefile for PCI-Express PORT Driver
 #
 
-# Build PCI Express ASPM if needed
-obj-$(CONFIG_PCIEASPM)		+= aspm.o
-
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o portdrv_bus.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
deleted file mode 100644
index 1a5adeb..0000000
--- a/drivers/pci/pcie/aspm.c
+++ /dev/null

@@ -1,802 +0,0 @@
-/*
- * File:	drivers/pci/pcie/aspm.c
- * Enabling PCIE link L0s/L1 state and Clock Power Management
- *
- * Copyright (C) 2007 Intel
- * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
- * Copyright (C) Shaohua Li (shaohua.li@intel.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/pci_regs.h>
-#include <linux/errno.h>
-#include <linux/pm.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/aspm.h>
-#include <acpi/acpi_bus.h>
-#include <linux/pci-acpi.h>
-#include "../pci.h"
-
-#ifdef MODULE_PARAM_PREFIX
-#undef MODULE_PARAM_PREFIX
-#endif
-#define MODULE_PARAM_PREFIX "pcie_aspm."
-
-struct endpoint_state {
-	unsigned int l0s_acceptable_latency;
-	unsigned int l1_acceptable_latency;
-};
-
-struct pcie_link_state {
-	struct list_head sibiling;
-	struct pci_dev *pdev;
-
-	/* ASPM state */
-	unsigned int support_state;
-	unsigned int enabled_state;
-	unsigned int bios_aspm_state;
-	/* upstream component */
-	unsigned int l0s_upper_latency;
-	unsigned int l1_upper_latency;
-	/* downstream component */
-	unsigned int l0s_down_latency;
-	unsigned int l1_down_latency;
-	/* Clock PM state*/
-	unsigned int clk_pm_capable;
-	unsigned int clk_pm_enabled;
-	unsigned int bios_clk_state;
-
-	/*
-	 * A pcie downstream port only has one slot under it, so at most there
-	 * are 8 functions
-	 */
-	struct endpoint_state endpoints[8];
-};
-
-static int aspm_disabled;
-static DEFINE_MUTEX(aspm_lock);
-static LIST_HEAD(link_list);
-
-#define POLICY_DEFAULT 0	/* BIOS default setting */
-#define POLICY_PERFORMANCE 1	/* high performance */
-#define POLICY_POWERSAVE 2	/* high power saving */
-static int aspm_policy;
-static const char *policy_str[] = {
-	[POLICY_DEFAULT] = "default",
-	[POLICY_PERFORMANCE] = "performance",
-	[POLICY_POWERSAVE] = "powersave"
-};
-
-static int policy_to_aspm_state(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	switch (aspm_policy) {
-	case POLICY_PERFORMANCE:
-		/* Disable ASPM and Clock PM */
-		return 0;
-	case POLICY_POWERSAVE:
-		/* Enable ASPM L0s/L1 */
-		return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-	case POLICY_DEFAULT:
-		return link_state->bios_aspm_state;
-	}
-	return 0;
-}
-
-static int policy_to_clkpm_state(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	switch (aspm_policy) {
-	case POLICY_PERFORMANCE:
-		/* Disable ASPM and Clock PM */
-		return 0;
-	case POLICY_POWERSAVE:
-		/* Disable Clock PM */
-		return 1;
-	case POLICY_DEFAULT:
-		return link_state->bios_clk_state;
-	}
-	return 0;
-}
-
-static void pcie_set_clock_pm(struct pci_dev *pdev, int enable)
-{
-	struct pci_dev *child_dev;
-	int pos;
-	u16 reg16;
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		if (!pos)
-			return;
-		pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
-		if (enable)
-			reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
-		else
-			reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
-		pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16);
-	}
-	link_state->clk_pm_enabled = !!enable;
-}
-
-static void pcie_check_clock_pm(struct pci_dev *pdev)
-{
-	int pos;
-	u32 reg32;
-	u16 reg16;
-	int capable = 1, enabled = 1;
-	struct pci_dev *child_dev;
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	/* All functions should have the same cap and state, take the worst */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		if (!pos)
-			return;
-		pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, &reg32);
-		if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
-			capable = 0;
-			enabled = 0;
-			break;
-		}
-		pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
-		if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
-			enabled = 0;
-	}
-	link_state->clk_pm_capable = capable;
-	link_state->clk_pm_enabled = enabled;
-	link_state->bios_clk_state = enabled;
-	pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-}
-
-/*
- * pcie_aspm_configure_common_clock: check if the 2 ends of a link
- *   could use common clock. If they are, configure them to use the
- *   common clock. That will reduce the ASPM state exit latency.
- */
-static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
-{
-	int pos, child_pos;
-	u16 reg16 = 0;
-	struct pci_dev *child_dev;
-	int same_clock = 1;
-
-	/*
-	 * all functions of a slot should have the same Slot Clock
-	 * Configuration, so just check one function
-	 * */
-	child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-		bus_list);
-	BUG_ON(!child_dev->is_pcie);
-
-	/* Check downstream component if bit Slot Clock Configuration is 1 */
-	child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-	pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, &reg16);
-	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
-		same_clock = 0;
-
-	/* Check upstream component if bit Slot Clock Configuration is 1 */
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
-	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
-		same_clock = 0;
-
-	/* Configure downstream component, all functions */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-			&reg16);
-		if (same_clock)
-			reg16 |= PCI_EXP_LNKCTL_CCC;
-		else
-			reg16 &= ~PCI_EXP_LNKCTL_CCC;
-		pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-			reg16);
-	}
-
-	/* Configure upstream component */
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-	if (same_clock)
-		reg16 |= PCI_EXP_LNKCTL_CCC;
-	else
-		reg16 &= ~PCI_EXP_LNKCTL_CCC;
-	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-
-	/* retrain link */
-	reg16 |= PCI_EXP_LNKCTL_RL;
-	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-
-	/* Wait for link training end */
-	while (1) {
-		pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
-		if (!(reg16 & PCI_EXP_LNKSTA_LT))
-			break;
-		cpu_relax();
-	}
-}
-
-/*
- * calc_L0S_latency: Convert L0s latency encoding to ns
- */
-static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac)
-{
-	unsigned int ns = 64;
-
-	if (latency_encoding == 0x7) {
-		if (ac)
-			ns = -1U;
-		else
-			ns = 5*1000; /* > 4us */
-	} else
-		ns *= (1 << latency_encoding);
-	return ns;
-}
-
-/*
- * calc_L1_latency: Convert L1 latency encoding to ns
- */
-static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac)
-{
-	unsigned int ns = 1000;
-
-	if (latency_encoding == 0x7) {
-		if (ac)
-			ns = -1U;
-		else
-			ns = 65*1000; /* > 64us */
-	} else
-		ns *= (1 << latency_encoding);
-	return ns;
-}
-
-static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
-	unsigned int *l0s, unsigned int *l1, unsigned int *enabled)
-{
-	int pos;
-	u16 reg16;
-	u32 reg32;
-	unsigned int latency;
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &reg32);
-	*state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
-	if (*state != PCIE_LINK_STATE_L0S &&
-		*state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S))
-		* state = 0;
-	if (*state == 0)
-		return;
-
-	latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
-	*l0s = calc_L0S_latency(latency, 0);
-	if (*state & PCIE_LINK_STATE_L1) {
-		latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
-		*l1 = calc_L1_latency(latency, 0);
-	}
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-	*enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1);
-}
-
-static void pcie_aspm_cap_init(struct pci_dev *pdev)
-{
-	struct pci_dev *child_dev;
-	u32 state, tmp;
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	/* upstream component states */
-	pcie_aspm_get_cap_device(pdev, &link_state->support_state,
-		&link_state->l0s_upper_latency,
-		&link_state->l1_upper_latency,
-		&link_state->enabled_state);
-	/* downstream component states, all functions have the same setting */
-	child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-		bus_list);
-	pcie_aspm_get_cap_device(child_dev, &state,
-		&link_state->l0s_down_latency,
-		&link_state->l1_down_latency,
-		&tmp);
-	link_state->support_state &= state;
-	if (!link_state->support_state)
-		return;
-	link_state->enabled_state &= link_state->support_state;
-	link_state->bios_aspm_state = link_state->enabled_state;
-
-	/* ENDPOINT states*/
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		int pos;
-		u32 reg32;
-		unsigned int latency;
-		struct endpoint_state *ep_state =
-			&link_state->endpoints[PCI_FUNC(child_dev->devfn)];
-
-		if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-			child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)
-			continue;
-
-		pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-		pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, &reg32);
-		latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
-		latency = calc_L0S_latency(latency, 1);
-		ep_state->l0s_acceptable_latency = latency;
-		if (link_state->support_state & PCIE_LINK_STATE_L1) {
-			latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
-			latency = calc_L1_latency(latency, 1);
-			ep_state->l1_acceptable_latency = latency;
-		}
-	}
-}
-
-static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev,
-	unsigned int state)
-{
-	struct pci_dev *parent_dev, *tmp_dev;
-	unsigned int latency, l1_latency = 0;
-	struct pcie_link_state *link_state;
-	struct endpoint_state *ep_state;
-
-	parent_dev = pdev->bus->self;
-	link_state = parent_dev->link_state;
-	state &= link_state->support_state;
-	if (state == 0)
-		return 0;
-	ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)];
-
-	/*
-	 * Check latency for endpoint device.
-	 * TBD: The latency from the endpoint to root complex vary per
-	 * switch's upstream link state above the device. Here we just do a
-	 * simple check which assumes all links above the device can be in L1
-	 * state, that is we just consider the worst case. If switch's upstream
-	 * link can't be put into L0S/L1, then our check is too strictly.
-	 */
-	tmp_dev = pdev;
-	while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
-		parent_dev = tmp_dev->bus->self;
-		link_state = parent_dev->link_state;
-		if (state & PCIE_LINK_STATE_L0S) {
-			latency = max_t(unsigned int,
-					link_state->l0s_upper_latency,
-					link_state->l0s_down_latency);
-			if (latency > ep_state->l0s_acceptable_latency)
-				state &= ~PCIE_LINK_STATE_L0S;
-		}
-		if (state & PCIE_LINK_STATE_L1) {
-			latency = max_t(unsigned int,
-					link_state->l1_upper_latency,
-					link_state->l1_down_latency);
-			if (latency + l1_latency >
-					ep_state->l1_acceptable_latency)
-				state &= ~PCIE_LINK_STATE_L1;
-		}
-		if (!parent_dev->bus->self) /* parent_dev is a root port */
-			break;
-		else {
-			/*
-			 * parent_dev is the downstream port of a switch, make
-			 * tmp_dev the upstream port of the switch
-			 */
-			tmp_dev = parent_dev->bus->self;
-			/*
-			 * every switch on the path to root complex need 1 more
-			 * microsecond for L1. Spec doesn't mention L0S.
-			 */
-			if (state & PCIE_LINK_STATE_L1)
-				l1_latency += 1000;
-		}
-	}
-	return state;
-}
-
-static unsigned int pcie_aspm_check_state(struct pci_dev *pdev,
-	unsigned int state)
-{
-	struct pci_dev *child_dev;
-
-	/* If no child, disable the link */
-	if (list_empty(&pdev->subordinate->devices))
-		return 0;
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-			/*
-			 * If downstream component of a link is pci bridge, we
-			 * disable ASPM for now for the link
-			 * */
-			state = 0;
-			break;
-		}
-		if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-			child_dev->pcie_type != PCI_EXP_TYPE_LEG_END))
-			continue;
-		/* Device not in D0 doesn't need check latency */
-		if (child_dev->current_state == PCI_D1 ||
-			child_dev->current_state == PCI_D2 ||
-			child_dev->current_state == PCI_D3hot ||
-			child_dev->current_state == PCI_D3cold)
-			continue;
-		state = __pcie_aspm_check_state_one(child_dev, state);
-	}
-	return state;
-}
-
-static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state)
-{
-	u16 reg16;
-	int pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-
-	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-	reg16 &= ~0x3;
-	reg16 |= state;
-	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-}
-
-static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state)
-{
-	struct pci_dev *child_dev;
-	int valid = 1;
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	/*
-	 * if the downstream component has pci bridge function, don't do ASPM
-	 * now
-	 */
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-		if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-			valid = 0;
-			break;
-		}
-	}
-	if (!valid)
-		return;
-
-	/*
-	 * spec 2.0 suggests all functions should be configured the same
-	 * setting for ASPM. Enabling ASPM L1 should be done in upstream
-	 * component first and then downstream, and vice versa for disabling
-	 * ASPM L1. Spec doesn't mention L0S.
-	 */
-	if (state & PCIE_LINK_STATE_L1)
-		__pcie_aspm_config_one_dev(pdev, state);
-
-	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list)
-		__pcie_aspm_config_one_dev(child_dev, state);
-
-	if (!(state & PCIE_LINK_STATE_L1))
-		__pcie_aspm_config_one_dev(pdev, state);
-
-	link_state->enabled_state = state;
-}
-
-static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
-	unsigned int state)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (link_state->support_state == 0)
-		return;
-	state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-
-	/* state 0 means disabling aspm */
-	state = pcie_aspm_check_state(pdev, state);
-	if (link_state->enabled_state == state)
-		return;
-	__pcie_aspm_config_link(pdev, state);
-}
-
-/*
- * pcie_aspm_configure_link_state: enable/disable PCI express link state
- * @pdev: the root port or switch downstream port
- */
-static void pcie_aspm_configure_link_state(struct pci_dev *pdev,
-	unsigned int state)
-{
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	__pcie_aspm_configure_link_state(pdev, state);
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-}
-
-static void free_link_state(struct pci_dev *pdev)
-{
-	kfree(pdev->link_state);
-	pdev->link_state = NULL;
-}
-
-/*
- * pcie_aspm_init_link_state: Initiate PCI express link state.
- * It is called after the pcie and its children devices are scaned.
- * @pdev: the root port or switch downstream port
- */
-void pcie_aspm_init_link_state(struct pci_dev *pdev)
-{
-	unsigned int state;
-	struct pcie_link_state *link_state;
-	int error = 0;
-
-	if (aspm_disabled || !pdev->is_pcie || pdev->link_state)
-		return;
-	if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-		return;
-	down_read(&pci_bus_sem);
-	if (list_empty(&pdev->subordinate->devices))
-		goto out;
-
-	mutex_lock(&aspm_lock);
-
-	link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
-	if (!link_state)
-		goto unlock_out;
-	pdev->link_state = link_state;
-
-	pcie_aspm_configure_common_clock(pdev);
-
-	pcie_aspm_cap_init(pdev);
-
-	/* config link state to avoid BIOS error */
-	state = pcie_aspm_check_state(pdev, policy_to_aspm_state(pdev));
-	__pcie_aspm_config_link(pdev, state);
-
-	pcie_check_clock_pm(pdev);
-
-	link_state->pdev = pdev;
-	list_add(&link_state->sibiling, &link_list);
-
-unlock_out:
-	if (error)
-		free_link_state(pdev);
-	mutex_unlock(&aspm_lock);
-out:
-	up_read(&pci_bus_sem);
-}
-
-/* @pdev: the endpoint device */
-void pcie_aspm_exit_link_state(struct pci_dev *pdev)
-{
-	struct pci_dev *parent = pdev->bus->self;
-	struct pcie_link_state *link_state = parent->link_state;
-
-	if (aspm_disabled || !pdev->is_pcie || !parent || !link_state)
-		return;
-	if (parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-		return;
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-
-	/*
-	 * All PCIe functions are in one slot, remove one function will remove
-	 * the the whole slot, so just wait
-	 */
-	if (!list_empty(&parent->subordinate->devices))
-		goto out;
-
-	/* All functions are removed, so just disable ASPM for the link */
-	__pcie_aspm_config_one_dev(parent, 0);
-	list_del(&link_state->sibiling);
-	/* Clock PM is for endpoint device */
-
-	free_link_state(parent);
-out:
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-}
-
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (aspm_disabled || !pdev->is_pcie || !pdev->link_state)
-		return;
-	if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-		return;
-	/*
-	 * devices changed PM state, we should recheck if latency meets all
-	 * functions' requirement
-	 */
-	pcie_aspm_configure_link_state(pdev, link_state->enabled_state);
-}
-
-/*
- * pci_disable_link_state - disable pci device's link state, so the link will
- * never enter specific states
- */
-void pci_disable_link_state(struct pci_dev *pdev, int state)
-{
-	struct pci_dev *parent = pdev->bus->self;
-	struct pcie_link_state *link_state;
-
-	if (aspm_disabled || !pdev->is_pcie)
-		return;
-	if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
-	    pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
-		parent = pdev;
-	if (!parent)
-		return;
-
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	link_state = parent->link_state;
-	link_state->support_state &=
-		~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1));
-	if (state & PCIE_LINK_STATE_CLKPM)
-		link_state->clk_pm_capable = 0;
-
-	__pcie_aspm_configure_link_state(parent, link_state->enabled_state);
-	if (!link_state->clk_pm_capable && link_state->clk_pm_enabled)
-		pcie_set_clock_pm(parent, 0);
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-}
-EXPORT_SYMBOL(pci_disable_link_state);
-
-static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
-{
-	int i;
-	struct pci_dev *pdev;
-	struct pcie_link_state *link_state;
-
-	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
-		if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
-			break;
-	if (i >= ARRAY_SIZE(policy_str))
-		return -EINVAL;
-	if (i == aspm_policy)
-		return 0;
-
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	aspm_policy = i;
-	list_for_each_entry(link_state, &link_list, sibiling) {
-		pdev = link_state->pdev;
-		__pcie_aspm_configure_link_state(pdev,
-			policy_to_aspm_state(pdev));
-		if (link_state->clk_pm_capable &&
-		    link_state->clk_pm_enabled != policy_to_clkpm_state(pdev))
-			pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-
-	}
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-	return 0;
-}
-
-static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
-{
-	int i, cnt = 0;
-	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
-		if (i == aspm_policy)
-			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
-		else
-			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
-	return cnt;
-}
-
-module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
-	NULL, 0644);
-
-#ifdef CONFIG_PCIEASPM_DEBUG
-static ssize_t link_state_show(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	struct pcie_link_state *link_state = pci_device->link_state;
-
-	return sprintf(buf, "%d\n", link_state->enabled_state);
-}
-
-static ssize_t link_state_store(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t n)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	int state;
-
-	if (n < 1)
-		return -EINVAL;
-	state = buf[0]-'0';
-	if (state >= 0 && state <= 3) {
-		/* setup link aspm state */
-		pcie_aspm_configure_link_state(pci_device, state);
-		return n;
-	}
-
-	return -EINVAL;
-}
-
-static ssize_t clk_ctl_show(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	struct pcie_link_state *link_state = pci_device->link_state;
-
-	return sprintf(buf, "%d\n", link_state->clk_pm_enabled);
-}
-
-static ssize_t clk_ctl_store(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t n)
-{
-	struct pci_dev *pci_device = to_pci_dev(dev);
-	int state;
-
-	if (n < 1)
-		return -EINVAL;
-	state = buf[0]-'0';
-
-	down_read(&pci_bus_sem);
-	mutex_lock(&aspm_lock);
-	pcie_set_clock_pm(pci_device, !!state);
-	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
-
-	return n;
-}
-
-static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store);
-static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store);
-
-static char power_group[] = "power";
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
-		return;
-
-	if (link_state->support_state)
-		sysfs_add_file_to_group(&pdev->dev.kobj,
-			&dev_attr_link_state.attr, power_group);
-	if (link_state->clk_pm_capable)
-		sysfs_add_file_to_group(&pdev->dev.kobj,
-			&dev_attr_clk_ctl.attr, power_group);
-}
-
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
-{
-	struct pcie_link_state *link_state = pdev->link_state;
-
-	if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-		pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
-		return;
-
-	if (link_state->support_state)
-		sysfs_remove_file_from_group(&pdev->dev.kobj,
-			&dev_attr_link_state.attr, power_group);
-	if (link_state->clk_pm_capable)
-		sysfs_remove_file_from_group(&pdev->dev.kobj,
-			&dev_attr_clk_ctl.attr, power_group);
-}
-#endif
-
-static int __init pcie_aspm_disable(char *str)
-{
-	aspm_disabled = 1;
-	return 1;
-}
-
-__setup("pcie_noaspm", pcie_aspm_disable);
-
-static int __init pcie_aspm_init(void)
-{
-	if (aspm_disabled)
-		return 0;
-	pci_osc_support_set(OSC_ACTIVE_STATE_PWR_SUPPORT|
-		OSC_CLOCK_PWR_CAPABILITY_SUPPORT);
-	return 0;
-}
-
-fs_initcall(pcie_aspm_init);

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8b505bd..7f5dab3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c

@@ -9,7 +9,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 #define CARDBUS_LATENCY_TIMER	176	/* secondary latency timer */
@@ -434,7 +433,7 @@
 	return child;
 }
 
-struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
+struct pci_bus *__ref pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
 {
 	struct pci_bus *child;
 
@@ -949,7 +948,7 @@
 	up_write(&pci_bus_sem);
 }
 
-struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
+struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
 {
 	struct pci_dev *dev;
 
@@ -1002,10 +1001,6 @@
 				break;
 		}
 	}
-
-	if (bus->self)
-		pcie_aspm_init_link_state(bus->self);
-
 	return nr;
 }
 
@@ -1045,20 +1040,6 @@
 	return max;
 }
 
-unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
-{
-	unsigned int max;
-
-	max = pci_scan_child_bus(bus);
-
-	/*
-	 * Make the discovered devices available.
-	 */
-	pci_bus_add_devices(bus);
-
-	return max;
-}
-
 struct pci_bus * pci_create_bus(struct device *parent,
 		int bus, struct pci_ops *ops, void *sysdata)
 {
@@ -1145,7 +1126,6 @@
 
 #ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pci_add_new_bus);
-EXPORT_SYMBOL(pci_do_scan_bus);
 EXPORT_SYMBOL(pci_scan_slot);
 EXPORT_SYMBOL(pci_scan_bridge);
 EXPORT_SYMBOL_GPL(pci_scan_child_bus);

diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index ec4a82b..9684e1b 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c

@@ -1,6 +1,5 @@
 #include <linux/pci.h>
 #include <linux/module.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 static void pci_free_resources(struct pci_dev *dev)
@@ -31,9 +30,6 @@
 		dev->global_list.next = dev->global_list.prev = NULL;
 		up_write(&pci_bus_sem);
 	}
-
-	if (dev->bus->self)
-		pcie_aspm_exit_link_state(dev);
 }
 
 static void pci_destroy_dev(struct pci_dev *dev)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8a7232f..262b043 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c

@@ -456,7 +456,7 @@
 	}
 }
 
-void pci_bus_size_bridges(struct pci_bus *bus)
+void __ref pci_bus_size_bridges(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 	unsigned long mask, prefmask;
@@ -511,7 +511,7 @@
 }
 EXPORT_SYMBOL(pci_bus_size_bridges);
 
-void pci_bus_assign_resources(struct pci_bus *bus)
+void __ref pci_bus_assign_resources(struct pci_bus *bus)
 {
 	struct pci_bus *b;
 	struct pci_dev *dev;

diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index c5e0d89..ec4c125 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c

@@ -368,7 +368,7 @@
 			handled = 1;
 			irc = pcc_get(i, PCIRC);
 			irc >>=16;
-			debug(2, "m32r-pcc:interrput: socket %d pcirc 0x%02x ", i, irc);
+			debug(2, "m32r-pcc:interrupt: socket %d pcirc 0x%02x ", i, irc);
 			if (!irc)
 				continue;
 

diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index d182760..4ea426a 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c

@@ -851,7 +851,7 @@
 	   I tried to control the CxOE signal with SS_OUTPUT_ENA,
 	   but the reset signal seems connected via the 541.
 	   If the CxOE is left high are some signals tristated and
-	   no pullups are present -> the cards act wierd.
+	   no pullups are present -> the cards act weird.
 	   So right now the buffers are enabled if the power is on. */
 
 	if (state->Vcc || state->Vpp)

diff --git a/drivers/scsi/NCR53C9x.h b/drivers/scsi/NCR53C9x.h
index d85cb73..00a0ba0 100644
--- a/drivers/scsi/NCR53C9x.h
+++ b/drivers/scsi/NCR53C9x.h

@@ -1,6 +1,6 @@
 /* NCR53C9x.c:  Defines and structures for the NCR53C9x generic driver.
  *
- * Originaly esp.h:  Defines and structures for the Sparc ESP 
+ * Originally esp.h:  Defines and structures for the Sparc ESP 
  *                   (Enhanced SCSI Processor) driver under Linux.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)

diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 190568e..5a1471c 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c

@@ -21,7 +21,7 @@
  *  Modified by Chris Faulhaber <jedgar@fxp.org>
  *        Added module command-line options
  *        19-Jul-99
- *  Modified by Adam Fritzler <mid@auk.cx>
+ *  Modified by Adam Fritzler
  *        Added proper detection of the AHA-1640 (MCA version of AHA-1540)
  */
 

diff --git a/drivers/scsi/aic7xxx/Makefile b/drivers/scsi/aic7xxx/Makefile
index e4f70c5..4c54954 100644
--- a/drivers/scsi/aic7xxx/Makefile
+++ b/drivers/scsi/aic7xxx/Makefile

@@ -44,13 +44,8 @@
 
 # Dependencies for generated files need to be listed explicitly
 
-$(obj)/aic7xxx_core.o: $(obj)/aic7xxx_seq.h
-$(obj)/aic7xxx_core.o: $(obj)/aic7xxx_reg.h
-$(obj)/aic79xx_core.o: $(obj)/aic79xx_seq.h
-$(obj)/aic79xx_core.o: $(obj)/aic79xx_reg.h
-
-$(addprefix $(obj)/,$(aic7xxx-y)): $(obj)/aic7xxx_seq.h
-$(addprefix $(obj)/,$(aic79xx-y)): $(obj)/aic79xx_seq.h
+$(addprefix $(src)/,$(aic7xxx-y:.o=.c)): $(obj)/aic7xxx_seq.h $(obj)/aic7xxx_reg.h
+$(addprefix $(src)/,$(aic79xx-y:.o=.c)): $(obj)/aic79xx_seq.h $(obj)/aic79xx_reg.h
 
 aic7xxx-gen-$(CONFIG_AIC7XXX_BUILD_FIRMWARE)	:= $(obj)/aic7xxx_reg.h
 aic7xxx-gen-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT)	+= $(obj)/aic7xxx_reg_print.c

diff --git a/drivers/scsi/aic7xxx/aic79xx_inline.h b/drivers/scsi/aic7xxx/aic79xx_inline.h
index 2ceb67f..45e5557 100644
--- a/drivers/scsi/aic7xxx/aic79xx_inline.h
+++ b/drivers/scsi/aic7xxx/aic79xx_inline.h

@@ -417,7 +417,7 @@
 	       - (uint8_t *)ahd->qoutfifo);
 }
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 static __inline struct ahd_initiator_tinfo *
 			ahd_fetch_transinfo(struct ahd_softc *ahd,
 					    char channel, u_int our_id,

diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 0146547..72fccd9 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c

@@ -325,7 +325,7 @@
 "	verbose			Enable verbose/diagnostic logging\n"
 "	allow_memio		Allow device registers to be memory mapped\n"
 "	debug			Bitmask of debug values to enable\n"
-"	no_reset		Supress initial bus resets\n"
+"	no_reset		Suppress initial bus resets\n"
 "	extended		Enable extended geometry on all controllers\n"
 "	periodic_otag		Send an ordered tagged transaction\n"
 "				periodically to prevent tag starvation.\n"

diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index df85367..c9f79fd 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c

@@ -979,7 +979,7 @@
 			  |  AHD_FAINT_LED_BUG;
 
 		/*
-		 * IO Cell paramter setup.
+		 * IO Cell parameter setup.
 		 */
 		AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
 
@@ -1006,7 +1006,7 @@
 			ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG;
 
 		/*
-		 * IO Cell paramter setup.
+		 * IO Cell parameter setup.
 		 */
 		AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
 		AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB);

diff --git a/drivers/scsi/aic7xxx/aic7xxx_inline.h b/drivers/scsi/aic7xxx/aic7xxx_inline.h
index 8e1954c..cba2f23 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_inline.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_inline.h

@@ -229,7 +229,7 @@
 	return (ahc->name);
 }
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 
 static __inline void	ahc_update_residual(struct ahc_softc *ahc,
 					    struct scb *scb);

diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 99a3b33..282aff6 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c

@@ -347,7 +347,7 @@
 "	debug			Bitmask of debug values to enable\n"
 "	no_probe		Toggle EISA/VLB controller probing\n"
 "	probe_eisa_vl		Toggle EISA/VLB controller probing\n"
-"	no_reset		Supress initial bus resets\n"
+"	no_reset		Suppress initial bus resets\n"
 "	extended		Enable extended geometry on all controllers\n"
 "	periodic_otag		Send an ordered tagged transaction\n"
 "				periodically to prevent tag starvation.\n"

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 73270ff..2074701 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c

@@ -7053,7 +7053,7 @@
  * where it can accept new commands.
 
  * Return value:
- * 	0 on sucess / -EIO on failure
+ * 	0 on success / -EIO on failure
  **/
 static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
 {

diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 7505cca..bb152fb 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c

@@ -1309,7 +1309,7 @@
 			cstatus.value = (*ha->func.statupd) (ha);
 
 		if (cstatus.fields.command_id > (IPS_MAX_CMDS - 1)) {
-			/* Spurious Interupt ? */
+			/* Spurious Interrupt ? */
 			continue;
 		}
 

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index f26b953..83567b9 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h

@@ -325,7 +325,7 @@
 
 #define WORKER_MBOX_TMO                0x100	/* hba: MBOX timeout */
 #define WORKER_HB_TMO                  0x200	/* hba: Heart beat timeout */
-#define WORKER_FABRIC_BLOCK_TMO        0x400	/* hba: fabric block timout */
+#define WORKER_FABRIC_BLOCK_TMO        0x400	/* hba: fabric block timeout */
 #define WORKER_RAMP_DOWN_QUEUE         0x800	/* hba: Decrease Q depth */
 #define WORKER_RAMP_UP_QUEUE           0x1000	/* hba: Increase Q depth */
 

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 29b4cf9..6cfeba7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c

@@ -1894,7 +1894,7 @@
 	uint16_t iotag;
 	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
 
-	if (pci_enable_device_bars(pdev, bars))
+	if (pci_enable_device_mem(pdev))
 		goto out;
 	if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
 		goto out_disable_device;

diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index dfc63f6..7a9be4c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c

@@ -880,7 +880,7 @@
 void
 lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
 {
-	/* This function expects to be called from interupt context */
+	/* This function expects to be called from interrupt context */
 	spin_lock(&phba->hbalock);
 	list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
 	spin_unlock(&phba->hbalock);

diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 6db77c0..9f04192 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c

@@ -3464,12 +3464,12 @@
 /*
  * START: Interface for the common management module
  *
- * This is the module, which interfaces with the common mangement module to
+ * This is the module, which interfaces with the common management module to
  * provide support for ioctl and sysfs
  */
 
 /**
- * megaraid_cmm_register - register with the mangement module
+ * megaraid_cmm_register - register with the management module
  * @adapter		: HBA soft state
  *
  * Register with the management module, which allows applications to issue
@@ -3557,7 +3557,7 @@
 
 
 /**
- * megaraid_cmm_unregister - un-register with the mangement module
+ * megaraid_cmm_unregister - un-register with the management module
  * @adapter		: HBA soft state
  *
  * Un-register with the management module.
@@ -3579,7 +3579,7 @@
  * @kioc		: CMM interface packet
  * @action		: command action
  *
- * This routine is invoked whenever the Common Mangement Module (CMM) has a
+ * This routine is invoked whenever the Common Management Module (CMM) has a
  * command for us. The 'action' parameter specifies if this is a new command
  * or otherwise.
  */
@@ -3944,7 +3944,7 @@
  *
  * This routine will be called whenever user reads the logical drive
  * attributes, go get the current logical drive mapping table from the
- * firmware. We use the managment API's to issue commands to the controller.
+ * firmware. We use the management API's to issue commands to the controller.
  *
  * NOTE: The commands issuance functionality is not generalized and
  * implemented in context of "get ld map" command only. If required, the

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index eb0784c..6226d88 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c

@@ -1094,7 +1094,7 @@
 }
 
 /**
- * qla2x00_mgmt_svr_login() - Login to fabric Managment Service.
+ * qla2x00_mgmt_svr_login() - Login to fabric Management Service.
  * @ha: HA context
  *
  * Returns 0 on success.

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index accaf69..d6be076 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h

@@ -121,7 +121,7 @@
 #define MAX_REQS_SERVICED_PER_INTR	16
 
 #define ISCSI_IPADDR_SIZE		4	/* IP address size */
-#define ISCSI_ALIAS_SIZE		32	/* ISCSI Alais name size */
+#define ISCSI_ALIAS_SIZE		32	/* ISCSI Alias name size */
 #define ISCSI_NAME_SIZE			0xE0	/* ISCSI Name size */
 
 #define LSDW(x) ((u32)((u64)(x)))

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index cbe0a17..49925f9 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c

@@ -1098,7 +1098,7 @@
 		}
 		config_chip = 1;
 
-		/* Reset clears the semaphore, so aquire again */
+		/* Reset clears the semaphore, so acquire again */
 		if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)
 			return QLA_ERROR;
 	}

diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 91630ba..3677fbb 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c

@@ -320,7 +320,7 @@
 EXPORT_SYMBOL_GPL(scsi_tgt_queue_command);
 
 /*
- * This is run from a interrpt handler normally and the unmap
+ * This is run from a interrupt handler normally and the unmap
  * needs process context so we must queue
  */
 static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd)

diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index f2149d0..43a964d 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c

@@ -6,7 +6,7 @@
  *
  * The SAS transport class contains common code to deal with SAS HBAs,
  * an aproximated representation of SAS topologies in the driver model,
- * and various sysfs attributes to expose these topologies and managment
+ * and various sysfs attributes to expose these topologies and management
  * interfaces to userspace.
  *
  * In addition to the basic SCSI core objects this transport class

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8a053ea..4fa7927 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig

@@ -1295,8 +1295,8 @@
 	depends on SERIAL_NETX
 	select SERIAL_CORE_CONSOLE
 	help
-	  If you have enabled the serial port on the Motorola IMX
-	  CPU you can make it the console by answering Y to this option.
+	  If you have enabled the serial port on the Hilscher NetX SoC
+	  you can make it the console by answering Y to this option.
 
 config SERIAL_OF_PLATFORM
 	tristate "Serial port on Open Firmware platform bus"

diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h
index 0274554..c8029e0 100644
--- a/drivers/serial/icom.h
+++ b/drivers/serial/icom.h

@@ -20,7 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include<linux/serial_core.h>
+#include <linux/serial_core.h>
 
 #define BAUD_TABLE_LIMIT	((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
 static int icom_acfg_baud[] = {

diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 8321101..e940317 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c

@@ -582,7 +582,7 @@
 };
 
 /**
- * mux_init - Serial MUX initalization procedure.
+ * mux_init - Serial MUX initialization procedure.
  *
  * Register the Serial MUX driver.
  */

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 2cd8573..639963e 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c

@@ -157,7 +157,7 @@
 #define SPI_FIFO_BYTE_WIDTH		(2)
 #define SPI_FIFO_OVERFLOW_MARGIN	(2)
 
-/* DMA burst lenght for half full/empty request trigger */
+/* DMA burst length for half full/empty request trigger */
 #define SPI_DMA_BLR			(SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2)
 
 /* Dummy char output to achieve reads.

diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index 1a31f7a..2d27d6d 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c

@@ -1,7 +1,7 @@
 /*
  * Broadcom 43xx PCI-SSB bridge module
  *
- * This technically is a seperate PCI driver module, but
+ * This technically is a separate PCI driver module, but
  * because of its small size we include it in the SSB core
  * instead of creating a standalone module.
  *

diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 83ee3e7..675abda 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c

@@ -2561,7 +2561,7 @@
 			pci_read_config_dword(rinfo->pdev, i * 4,
 					      &rinfo->cfg_save[i]);
 
-		/* Switch PCI power managment to D2. */
+		/* Switch PCI power management to D2. */
 		pci_disable_device(rinfo->pdev);
 		for (;;) {
 			pci_read_config_word(

diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
index e23324d..9704b73 100644
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c

@@ -1156,7 +1156,7 @@
 // need altered timings to display correctly. So I decided that it is much
 // better to provide a limited optimized set of modes plus the option of
 // using the mode in effect at startup time (might be selected using the
-// vga=??? paramter). After that the user might use fbset to select any
+// vga=??? parameter). After that the user might use fbset to select any
 // mode he likes, check_var will not try to alter geometry parameters as
 // it would be necessary otherwise.
 //

diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h
index 2fe3f7d..8367961 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/intelfb/intelfb.h

@@ -111,7 +111,7 @@
 
 #define FIXED_MODE(d) ((d)->fixed_mode)
 
-/*** Driver paramters ***/
+/*** Driver parameters ***/
 
 #define RINGBUFFER_SIZE		KB(64)
 #define HW_CURSOR_SIZE		KB(4)

diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 9085188..fb19ed4 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c

@@ -312,7 +312,7 @@
 /*
  * Change to a new video mode. We defer this to a later time to avoid any
  * flicker and not to mess up the current LCD DMA context. For this we disable
- * the LCD controler, which will generate a DONE irq after the last frame has
+ * the LCD controller, which will generate a DONE irq after the last frame has
  * been transferred. Then it'll be safe to reconfigure both the LCD controller
  * as well as the LCD DMA.
  */

diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 1be95a6..58f200c 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c

@@ -48,7 +48,7 @@
 	HEAD_PANEL	= 1,
 };
 
-/* SM501 memory adress */
+/* SM501 memory address */
 struct sm501_mem {
 	unsigned long	 size;
 	unsigned long	 sm_addr;

diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index cecbedd..61dde86 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c

@@ -52,7 +52,7 @@
  * overflow periods respectively.
  *
  * Also, since we can't really expect userspace to be responsive enough
- * before the overflow happens, we maintain two seperate timers .. One in
+ * before the overflow happens, we maintain two separate timers .. One in
  * the kernel for clearing out WOVF every 2ms or so (again, this depends on
  * HZ == 1000), and another for monitoring userspace writes to the WDT device.
  *

diff --git a/fs/befs/btree.c b/fs/befs/btree.c
index af5bb93..4202db7 100644
--- a/fs/befs/btree.c
+++ b/fs/befs/btree.c

@@ -232,7 +232,7 @@
  * @key: Key string to lookup in btree
  * @value: Value stored with @key
  *
- * On sucess, returns BEFS_OK and sets *@value to the value stored
+ * On success, returns BEFS_OK and sets *@value to the value stored
  * with @key (usually the disk block number of an inode).
  *
  * On failure, returns BEFS_ERR or BEFS_BT_NOT_FOUND.

diff --git a/fs/befs/datastream.c b/fs/befs/datastream.c
index aacb4da..e3287d0 100644
--- a/fs/befs/datastream.c
+++ b/fs/befs/datastream.c

@@ -236,7 +236,7 @@
 	as in the indirect region code).
 	
 	When/if blockno is found, if blockno is inside of a block 
-	run as stored on disk, we offset the start and lenght members 
+	run as stored on disk, we offset the start and length members
 	of the block run, so that blockno is the start and len is
 	still valid (the run ends in the same place).
 	

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 18ed6dd..4628c42 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c

@@ -117,7 +117,7 @@
 	return 0;
 }
 
-/* Let's use some macros to make this stack manipulation a litle clearer */
+/* Let's use some macros to make this stack manipulation a little clearer */
 #ifdef CONFIG_STACK_GROWSUP
 #define STACK_ADD(sp, items) ((elf_addr_t __user *)(sp) + (items))
 #define STACK_ROUND(sp, items) \

diff --git a/fs/freevxfs/vxfs_dir.h b/fs/freevxfs/vxfs_dir.h
index 3c96d6e..aaf1fb0 100644
--- a/fs/freevxfs/vxfs_dir.h
+++ b/fs/freevxfs/vxfs_dir.h

@@ -41,7 +41,7 @@
  * VxFS directory block header.
  *
  * This entry is the head of every filesystem block in a directory.
- * It is used for free space managment and additionally includes
+ * It is used for free space management and additionally includes
  * a hash for speeding up directory search (lookup).
  *
  * The hash may be empty and in fact we do not use it all in the

diff --git a/fs/freevxfs/vxfs_immed.c b/fs/freevxfs/vxfs_immed.c
index 24b5a77..8a5959a 100644
--- a/fs/freevxfs/vxfs_immed.c
+++ b/fs/freevxfs/vxfs_immed.c

@@ -54,7 +54,7 @@
 };
 
 /*
- * Adress space operations for immed files and directories.
+ * Address space operations for immed files and directories.
  */
 const struct address_space_operations vxfs_immed_aops = {
 	.readpage =		vxfs_immed_readpage,

diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c
index b249e29..6fb07d6 100644
--- a/fs/gfs2/recovery.c
+++ b/fs/gfs2/recovery.c

@@ -450,7 +450,7 @@
 		fs_info(sdp, "jid=%u: Trying to acquire journal lock...\n",
 			jd->jd_jid);
 
-		/* Aquire the journal lock so we can do recovery */
+		/* Acquire the journal lock so we can do recovery */
 
 		error = gfs2_glock_nq_num(sdp, jd->jd_jid, &gfs2_journal_glops,
 					  LM_ST_EXCLUSIVE,

diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 2eae5d2..6c1ba35 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c

@@ -741,7 +741,7 @@
 			 * are not obsolete.
 			 *
 			 * Of course, this optimization only makes sense in case
-			 * of NAND flashes (or other flashes whith
+			 * of NAND flashes (or other flashes with
 			 * !jffs2_can_mark_obsolete()), since on NOR flashes
 			 * nodes are marked obsolete physically.
 			 *

diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c
index 1543906..a000aaa 100644
--- a/fs/jfs/jfs_xtree.c
+++ b/fs/jfs/jfs_xtree.c

@@ -3965,7 +3965,7 @@
  *	xtTruncate_pmap()
  *
  * function:
- *	Perform truncate to zero lenghth for deleted file, leaving the
+ *	Perform truncate to zero length for deleted file, leaving the
  *	the xtree and working map untouched.  This allows the file to
  *	be accessed via open file handles, while the delete of the file
  *	is committed to disk.

diff --git a/fs/locks.c b/fs/locks.c
index 8b8388e..49354b9 100644
--- a/fs/locks.c
+++ b/fs/locks.c

@@ -125,6 +125,7 @@
 #include <linux/syscalls.h>
 #include <linux/time.h>
 #include <linux/rcupdate.h>
+#include <linux/pid_namespace.h>
 
 #include <asm/semaphore.h>
 #include <asm/uaccess.h>
@@ -185,6 +186,7 @@
 	fl->fl_fasync = NULL;
 	fl->fl_owner = NULL;
 	fl->fl_pid = 0;
+	fl->fl_nspid = NULL;
 	fl->fl_file = NULL;
 	fl->fl_flags = 0;
 	fl->fl_type = 0;
@@ -553,6 +555,8 @@
 {
 	list_add(&fl->fl_link, &file_lock_list);
 
+	fl->fl_nspid = get_pid(task_tgid(current));
+
 	/* insert into file's list */
 	fl->fl_next = *pos;
 	*pos = fl;
@@ -584,6 +588,11 @@
 	if (fl->fl_ops && fl->fl_ops->fl_remove)
 		fl->fl_ops->fl_remove(fl);
 
+	if (fl->fl_nspid) {
+		put_pid(fl->fl_nspid);
+		fl->fl_nspid = NULL;
+	}
+
 	locks_wake_up_blocks(fl);
 	locks_free_lock(fl);
 }
@@ -634,33 +643,6 @@
 	return (locks_conflict(caller_fl, sys_fl));
 }
 
-static int interruptible_sleep_on_locked(wait_queue_head_t *fl_wait, int timeout)
-{
-	int result = 0;
-	DECLARE_WAITQUEUE(wait, current);
-
-	__set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(fl_wait, &wait);
-	if (timeout == 0)
-		schedule();
-	else
-		result = schedule_timeout(timeout);
-	if (signal_pending(current))
-		result = -ERESTARTSYS;
-	remove_wait_queue(fl_wait, &wait);
-	__set_current_state(TASK_RUNNING);
-	return result;
-}
-
-static int locks_block_on_timeout(struct file_lock *blocker, struct file_lock *waiter, int time)
-{
-	int result;
-	locks_insert_block(blocker, waiter);
-	result = interruptible_sleep_on_locked(&waiter->fl_wait, time);
-	__locks_delete_block(waiter);
-	return result;
-}
-
 void
 posix_test_lock(struct file *filp, struct file_lock *fl)
 {
@@ -673,55 +655,67 @@
 		if (posix_locks_conflict(fl, cfl))
 			break;
 	}
-	if (cfl)
+	if (cfl) {
 		__locks_copy_lock(fl, cfl);
-	else
+		if (cfl->fl_nspid)
+			fl->fl_pid = pid_nr_ns(cfl->fl_nspid,
+						task_active_pid_ns(current));
+	} else
 		fl->fl_type = F_UNLCK;
 	unlock_kernel();
 	return;
 }
-
 EXPORT_SYMBOL(posix_test_lock);
 
-/* This function tests for deadlock condition before putting a process to
- * sleep. The detection scheme is no longer recursive. Recursive was neat,
- * but dangerous - we risked stack corruption if the lock data was bad, or
- * if the recursion was too deep for any other reason.
+/*
+ * Deadlock detection:
  *
- * We rely on the fact that a task can only be on one lock's wait queue
- * at a time. When we find blocked_task on a wait queue we can re-search
- * with blocked_task equal to that queue's owner, until either blocked_task
- * isn't found, or blocked_task is found on a queue owned by my_task.
+ * We attempt to detect deadlocks that are due purely to posix file
+ * locks.
  *
- * Note: the above assumption may not be true when handling lock requests
- * from a broken NFS client. But broken NFS clients have a lot more to
- * worry about than proper deadlock detection anyway... --okir
+ * We assume that a task can be waiting for at most one lock at a time.
+ * So for any acquired lock, the process holding that lock may be
+ * waiting on at most one other lock.  That lock in turns may be held by
+ * someone waiting for at most one other lock.  Given a requested lock
+ * caller_fl which is about to wait for a conflicting lock block_fl, we
+ * follow this chain of waiters to ensure we are not about to create a
+ * cycle.
  *
- * However, the failure of this assumption (also possible in the case of
- * multiple tasks sharing the same open file table) also means there's no
- * guarantee that the loop below will terminate.  As a hack, we give up
- * after a few iterations.
+ * Since we do this before we ever put a process to sleep on a lock, we
+ * are ensured that there is never a cycle; that is what guarantees that
+ * the while() loop in posix_locks_deadlock() eventually completes.
+ *
+ * Note: the above assumption may not be true when handling lock
+ * requests from a broken NFS client. It may also fail in the presence
+ * of tasks (such as posix threads) sharing the same open file table.
+ *
+ * To handle those cases, we just bail out after a few iterations.
  */
 
 #define MAX_DEADLK_ITERATIONS 10
 
+/* Find a lock that the owner of the given block_fl is blocking on. */
+static struct file_lock *what_owner_is_waiting_for(struct file_lock *block_fl)
+{
+	struct file_lock *fl;
+
+	list_for_each_entry(fl, &blocked_list, fl_link) {
+		if (posix_same_owner(fl, block_fl))
+			return fl->fl_next;
+	}
+	return NULL;
+}
+
 static int posix_locks_deadlock(struct file_lock *caller_fl,
 				struct file_lock *block_fl)
 {
-	struct file_lock *fl;
 	int i = 0;
 
-next_task:
-	if (posix_same_owner(caller_fl, block_fl))
-		return 1;
-	list_for_each_entry(fl, &blocked_list, fl_link) {
-		if (posix_same_owner(fl, block_fl)) {
-			if (i++ > MAX_DEADLK_ITERATIONS)
-				return 0;
-			fl = fl->fl_next;
-			block_fl = fl;
-			goto next_task;
-		}
+	while ((block_fl = what_owner_is_waiting_for(block_fl))) {
+		if (i++ > MAX_DEADLK_ITERATIONS)
+			return 0;
+		if (posix_same_owner(caller_fl, block_fl))
+			return 1;
 	}
 	return 0;
 }
@@ -1256,7 +1250,10 @@
 		if (break_time == 0)
 			break_time++;
 	}
-	error = locks_block_on_timeout(flock, new_fl, break_time);
+	locks_insert_block(flock, new_fl);
+	error = wait_event_interruptible_timeout(new_fl->fl_wait,
+						!new_fl->fl_next, break_time);
+	__locks_delete_block(new_fl);
 	if (error >= 0) {
 		if (error == 0)
 			time_out_leases(inode);
@@ -2084,6 +2081,12 @@
 							int id, char *pfx)
 {
 	struct inode *inode = NULL;
+	unsigned int fl_pid;
+
+	if (fl->fl_nspid)
+		fl_pid = pid_nr_ns(fl->fl_nspid, task_active_pid_ns(current));
+	else
+		fl_pid = fl->fl_pid;
 
 	if (fl->fl_file != NULL)
 		inode = fl->fl_file->f_path.dentry->d_inode;
@@ -2124,16 +2127,16 @@
 	}
 	if (inode) {
 #ifdef WE_CAN_BREAK_LSLK_NOW
-		seq_printf(f, "%d %s:%ld ", fl->fl_pid,
+		seq_printf(f, "%d %s:%ld ", fl_pid,
 				inode->i_sb->s_id, inode->i_ino);
 #else
 		/* userspace relies on this representation of dev_t ;-( */
-		seq_printf(f, "%d %02x:%02x:%ld ", fl->fl_pid,
+		seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
 				MAJOR(inode->i_sb->s_dev),
 				MINOR(inode->i_sb->s_dev), inode->i_ino);
 #endif
 	} else {
-		seq_printf(f, "%d <none>:0 ", fl->fl_pid);
+		seq_printf(f, "%d <none>:0 ", fl_pid);
 	}
 	if (IS_POSIX(fl)) {
 		if (fl->fl_end == OFFSET_MAX)

diff --git a/fs/ncpfs/mmap.c b/fs/ncpfs/mmap.c
index a94473d..5d8dcb9 100644
--- a/fs/ncpfs/mmap.c
+++ b/fs/ncpfs/mmap.c

@@ -50,10 +50,6 @@
 	pos = vmf->pgoff << PAGE_SHIFT;
 
 	count = PAGE_SIZE;
-	if ((unsigned long)vmf->virtual_address + PAGE_SIZE > area->vm_end) {
-		WARN_ON(1); /* shouldn't happen? */
-		count = area->vm_end - (unsigned long)vmf->virtual_address;
-	}
 	/* what we can read in one go */
 	bufsize = NCP_SERVER(inode)->buffer_size;
 

diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index e6df06a..64713e1 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c

@@ -3338,7 +3338,7 @@
 	if (insert->ins_split != SPLIT_NONE) {
 		/*
 		 * We could call ocfs2_insert_at_leaf() for some types
-		 * of splits, but it's easier to just let one seperate
+		 * of splits, but it's easier to just let one separate
 		 * function sort it all out.
 		 */
 		ocfs2_split_record(inode, left_path, right_path,

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 6b0107f..e280833 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c

@@ -1215,7 +1215,7 @@
 	down_write(&oi->ip_alloc_sem);
 
 	/*
-	 * Prepare for worst case allocation scenario of two seperate
+	 * Prepare for worst case allocation scenario of two separate
 	 * extents.
 	 */
 	if (alloc == 2)

diff --git a/fs/ocfs2/ocfs1_fs_compat.h b/fs/ocfs2/ocfs1_fs_compat.h
index 0b499bc..dfb313b 100644
--- a/fs/ocfs2/ocfs1_fs_compat.h
+++ b/fs/ocfs2/ocfs1_fs_compat.h

@@ -77,7 +77,7 @@
 {
 /*00*/	__u32 curr_master;
 	__u8 file_lock;
-	__u8 compat_pad[3];  /* Not in orignal definition.  Used to
+	__u8 compat_pad[3];  /* Not in original definition.  Used to
 				make the already existing alignment
 				explicit */
 	__u64 last_write_time;

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index 7e397e2..72c198a 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c

@@ -646,7 +646,7 @@
  * sync-data inodes."
  *
  * Note: OCFS2 already does this differently for metadata vs data
- * allocations, as those bitmaps are seperate and undo access is never
+ * allocations, as those bitmaps are separate and undo access is never
  * called on a metadata group descriptor.
  */
 static int ocfs2_test_bg_bit_allocatable(struct buffer_head *bg_bh,

diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index 16b331d..f491ceb 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c

@@ -272,7 +272,7 @@
 
 	/* If we don't have cached information on this bitmap block, we're
 	 * going to have to load it later anyway. Loading it here allows us
-	 * to make a better decision. This favors long-term performace gain
+	 * to make a better decision. This favors long-term performance gain
 	 * with a better on-disk layout vs. a short term gain of skipping the
 	 * read and potentially having a bad placement. */
 	if (info->free_count == UINT_MAX) {
@@ -663,7 +663,7 @@
 
 /*
  * Relocation based on dirid, hashing them into a given bitmap block
- * files. Formatted nodes are unaffected, a seperate policy covers them
+ * files. Formatted nodes are unaffected, a separate policy covers them
  */
 static void dirid_groups(reiserfs_blocknr_hint_t * hint)
 {
@@ -688,7 +688,7 @@
 
 /*
  * Relocation based on oid, hashing them into a given bitmap block
- * files. Formatted nodes are unaffected, a seperate policy covers them
+ * files. Formatted nodes are unaffected, a separate policy covers them
  */
 static void oid_groups(reiserfs_blocknr_hint_t * hint)
 {

diff --git a/fs/signalfd.c b/fs/signalfd.c
index fb7f7e8..2d3e107 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c

@@ -66,7 +66,7 @@
 	BUILD_BUG_ON(sizeof(struct signalfd_siginfo) != 128);
 
 	/*
-	 * Unused memebers should be zero ...
+	 * Unused members should be zero ...
 	 */
 	err = __clear_user(uinfo, sizeof(*uinfo));
 

diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index b729e64..d970f7f 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h

@@ -85,7 +85,7 @@
 #endif
 
 /*
- * ACPI Memory managment
+ * ACPI Memory management
  */
 void *acpi_allocate(u32 size);
 

diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 76411b1..6e253b5 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h

@@ -182,7 +182,7 @@
 /* Limit Interface */
 
 struct acpi_processor_lx {
-	int px;			/* performace state */
+	int px;			/* performance state */
 	int tx;			/* throttle level */
 };
 

diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
index 5d949d7..1205c28 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h

@@ -587,23 +587,23 @@
 #define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
 #define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
 
-#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
 
-#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
 
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 442494d..16ed24d 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h

@@ -737,25 +737,25 @@
 
 #define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
 
-#define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrup request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrup request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrup request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrup request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrup request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
 
 #define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
 
-#define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrup request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrup request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrup request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
 
 #elif defined(CONFIG_PXA27x)
 
@@ -1020,7 +1020,7 @@
 #define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
 #define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
 
-#define ICCR0_AME	(1 << 7)	/* Adress match enable */
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
 #define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
 #define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
 #define ICCR0_RXE	(1 << 4)	/* Receive enable */

diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
index 745aa84..f7263b9 100644
--- a/include/asm-arm/arch-versatile/irqs.h
+++ b/include/asm-arm/arch-versatile/irqs.h

@@ -22,7 +22,7 @@
 #include <asm/arch/platform.h>
 
 /* 
- *  IRQ interrupts definitions are the same the INT definitions
+ *  IRQ interrupts definitions are the same as the INT definitions
  *  held within platform.h
  */
 #define IRQ_VIC_START		0
@@ -94,7 +94,7 @@
 #define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
 
 /* 
- *  FIQ interrupts definitions are the same the INT definitions.
+ *  FIQ interrupts definitions are the same as the INT definitions.
  */
 #define FIQ_WDOGINT		INT_WDOGINT
 #define FIQ_SOFTINT		INT_SOFTINT

diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
index aaebb61..74b5fff 100644
--- a/include/asm-arm/hardware/it8152.h
+++ b/include/asm-arm/hardware/it8152.h

@@ -42,7 +42,7 @@
 #define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
 
 /*
-  Interrup contoler per register summary:
+  Interrupt controller per register summary:
   ---------------------------------------
   LCDNIRR:
   IT8152_LD_IRQ(8) PCICLK stop

diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
index f191e14..f9f3606 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/include/asm-arm/mach/udc_pxa2xx.h

@@ -16,7 +16,7 @@
 #define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
 
 	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
+	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
 	 * Note that sometimes the signals go through inverters...

diff --git a/include/asm-frv/atomic.h b/include/asm-frv/atomic.h
index d425d8d..6ec494a 100644
--- a/include/asm-frv/atomic.h
+++ b/include/asm-frv/atomic.h

@@ -1,7 +1,7 @@
 /* atomic.h: atomic operation emulation for FR-V
  *
  * For an explanation of how atomic ops work in this arch, see:
- *   Documentation/fujitsu/frv/atomic-ops.txt
+ *   Documentation/frv/atomic-ops.txt
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)

diff --git a/include/asm-frv/bitops.h b/include/asm-frv/bitops.h
index e29de71..5f86b87 100644
--- a/include/asm-frv/bitops.h
+++ b/include/asm-frv/bitops.h

@@ -1,7 +1,7 @@
 /* bitops.h: bit operations for the Fujitsu FR-V CPUs
  *
  * For an explanation of how atomic ops work in this arch, see:
- *   Documentation/fujitsu/frv/atomic-ops.txt
+ *   Documentation/frv/atomic-ops.txt
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)

diff --git a/include/asm-frv/cacheflush.h b/include/asm-frv/cacheflush.h
index 0250040..432a69e 100644
--- a/include/asm-frv/cacheflush.h
+++ b/include/asm-frv/cacheflush.h

@@ -29,7 +29,7 @@
 #define flush_dcache_mmap_unlock(mapping)	do {} while(0)
 
 /*
- * physically-indexed cache managment
+ * physically-indexed cache management
  * - see arch/frv/lib/cache.S
  */
 extern void frv_dcache_writeback(unsigned long start, unsigned long size);

diff --git a/include/asm-frv/highmem.h b/include/asm-frv/highmem.h
index ff4d6cd..26cefcd 100644
--- a/include/asm-frv/highmem.h
+++ b/include/asm-frv/highmem.h

@@ -4,7 +4,7 @@
  * Written by David Howells (dhowells@redhat.com)
  * - Derived from include/asm-i386/highmem.h
  *
- * See Documentation/fujitsu/frv/mmu-layout.txt for more information.
+ * See Documentation/frv/mmu-layout.txt for more information.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index aaf2a77..8353225 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h

@@ -39,7 +39,7 @@
 
 #ifdef CONFIG_MMU
 
-/* see Documentation/fujitsu/frv/mmu-layout.txt */
+/* see Documentation/frv/mmu-layout.txt */
 #define KERNEL_LOWMEM_START		__UL(0xc0000000)
 #define KERNEL_LOWMEM_END		__UL(0xd0000000)
 #define VMALLOC_START			__UL(0xd0000000)

diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
index 147e995..3c402af 100644
--- a/include/asm-frv/pgtable.h
+++ b/include/asm-frv/pgtable.h

@@ -93,7 +93,7 @@
 
 /*
  * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
- * [see Documentation/fujitsu/frv/mmu-layout.txt]
+ * [see Documentation/frv/mmu-layout.txt]
  *
  * Page Directory:
  *  - Size: 16KB

diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h
index 0f6e526..dfcf75b 100644
--- a/include/asm-ia64/compat.h
+++ b/include/asm-ia64/compat.h

@@ -181,7 +181,7 @@
 /*
  * A pointer passed in from user mode. This should not be used for syscall parameters,
  * just declare them as pointers because the syscall entry code will have appropriately
- * comverted them already.
+ * converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
index f43afe1..c142fbf 100644
--- a/include/asm-m68knommu/bitops.h
+++ b/include/asm-m68knommu/bitops.h

@@ -262,7 +262,7 @@
 		 * tmp = __swab32(*(p++));
 		 * tmp |= ~0UL >> (32-offset);
 		 *
-		 * but this would decrease preformance, so we change the
+		 * but this would decrease performance, so we change the
 		 * shift:
 		 */
 		tmp = *(p++);

diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
index 0161ebb..36e870b 100644
--- a/include/asm-m68knommu/commproc.h
+++ b/include/asm-m68knommu/commproc.h

@@ -715,7 +715,7 @@
 #define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
 #define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
 #define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
 #define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */

diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h
index 04a20fd..55cbd62 100644
--- a/include/asm-m68knommu/delay.h
+++ b/include/asm-m68knommu/delay.h

@@ -68,7 +68,7 @@
 /*
  *	Moved the udelay() function into library code, no longer inlined.
  *	I had to change the algorithm because we are overflowing now on
- *	the faster ColdFire parts. The code is a little biger, so it makes
+ *	the faster ColdFire parts. The code is a little bigger, so it makes
  *	sense to library it.
  */
 extern void udelay(unsigned long usecs);

diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
index 399814f..366eb86 100644
--- a/include/asm-m68knommu/m5249sim.h
+++ b/include/asm-m68knommu/m5249sim.h

@@ -43,10 +43,10 @@
 #define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
 #define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
 #define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
 #define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
 #define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
 #define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
 #define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
 

diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h
index d3ce550..5886728 100644
--- a/include/asm-m68knommu/m5307sim.h
+++ b/include/asm-m68knommu/m5307sim.h

@@ -64,22 +64,22 @@
 #define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
 #define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
 #else
-#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
 #define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
 #define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
 #define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
 #define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
 #define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
 #define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
 #define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
 #define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
 #define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
 #define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
 #define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
 #define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
 #endif /* CONFIG_OLDMASK */

diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h
index 75dcdac..cc22c4a 100644
--- a/include/asm-m68knommu/m5407sim.h
+++ b/include/asm-m68knommu/m5407sim.h

@@ -48,22 +48,22 @@
 #define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
 #define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
 
-#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
 #define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
 #define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
 #define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
 #define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
 #define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
 #define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
 #define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
 #define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
 #define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
 #define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
 #define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
 #define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
 

diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h
index a3f8cc8..d57217c 100644
--- a/include/asm-m68knommu/m68360_regs.h
+++ b/include/asm-m68knommu/m68360_regs.h

@@ -138,7 +138,7 @@
 #define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
 #define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
 
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
 #define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
 #define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
 #define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */

diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
index 1319a81..8a7a677 100644
--- a/include/asm-m68knommu/mcfuart.h
+++ b/include/asm-m68knommu/mcfuart.h

@@ -71,7 +71,7 @@
 #define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
 #define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
 #define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
-#define	MCFUART_UISR		0x14		/* Interrup Status (r) */
+#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
 #define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
 #define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
 #define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */

diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h
index 568c76c..ac5d541 100644
--- a/include/asm-mips/compat.h
+++ b/include/asm-mips/compat.h

@@ -128,7 +128,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef u32		compat_uptr_t;
 

diff --git a/include/asm-mips/mach-excite/excite_fpga.h b/include/asm-mips/mach-excite/excite_fpga.h
index 38fcda7..0a1ef69 100644
--- a/include/asm-mips/mach-excite/excite_fpga.h
+++ b/include/asm-mips/mach-excite/excite_fpga.h

@@ -3,7 +3,7 @@
 
 
 /**
- * Adress alignment of the individual FPGA bytes.
+ * Address alignment of the individual FPGA bytes.
  * The address arrangement of the individual bytes of the FPGA is two
  * byte aligned at the embedded MK2 platform.
  */

diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h
index 00d8bf6..83746b8 100644
--- a/include/asm-mips/mach-wrppmc/mach-gt64120.h
+++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h

@@ -45,7 +45,7 @@
 #define GT_PCI_IO_SIZE	0x02000000UL
 
 /*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
  * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
  * boards, they all either come in on IntD or they all come in on IntA, they
  * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the

diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h
index f4981c4..c0501f9 100644
--- a/include/asm-mips/sgi/ip22.h
+++ b/include/asm-mips/sgi/ip22.h

@@ -15,7 +15,7 @@
 /*
  * These are the virtual IRQ numbers, we divide all IRQ's into
  * 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
  * are not supported this way. Driver is supposed to allocate HPC/MC
  * interrupt as shareable and then look to proper status bit (see
  * HAL2 driver). This will prevent many complications, trust me ;-)

diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
index ef91b33..0187895 100644
--- a/include/asm-mips/sn/sn0/hubio.h
+++ b/include/asm-mips/sn/sn0/hubio.h

@@ -338,7 +338,7 @@
 #define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
 #define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
 #define IIO_IMMR	IIO_IIAP
-#define IIO_ICMR	0x4003a8	/* CRB Managment Register */
+#define IIO_ICMR	0x4003a8	/* CRB Management Register */
 #define IIO_ICCR	0x4003b0	/* CRB Control Register */
 #define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
 #define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */

diff --git a/include/asm-parisc/compat.h b/include/asm-parisc/compat.h
index 5a85d1b..7f32611 100644
--- a/include/asm-parisc/compat.h
+++ b/include/asm-parisc/compat.h

@@ -132,7 +132,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-parisc/elf.h b/include/asm-parisc/elf.h
index f628ac7..8e7946a 100644
--- a/include/asm-parisc/elf.h
+++ b/include/asm-parisc/elf.h

@@ -28,7 +28,7 @@
 #define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
 #define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
 
-/* Additional section indeces.  */
+/* Additional section indices.  */
 
 #define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
 					      symbols in ANSI C.  */

diff --git a/include/asm-parisc/linkage.h b/include/asm-parisc/linkage.h
index ad8cd0d..0b19a72 100644
--- a/include/asm-parisc/linkage.h
+++ b/include/asm-parisc/linkage.h

@@ -8,7 +8,7 @@
 
 /*
  * In parisc assembly a semicolon marks a comment while a
- * exclamation mark is used to seperate independent lines.
+ * exclamation mark is used to separate independent lines.
  */
 #ifdef __ASSEMBLY__
 

diff --git a/include/asm-parisc/vga.h b/include/asm-parisc/vga.h
index 154a84c..171399a 100644
--- a/include/asm-parisc/vga.h
+++ b/include/asm-parisc/vga.h

@@ -3,4 +3,4 @@
 
 /* nothing */
 
-#endif __ASM_PARISC_VGA_H__
+#endif /* __ASM_PARISC_VGA_H__ */

diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h
index 64ab1dd..d811a8c 100644
--- a/include/asm-powerpc/compat.h
+++ b/include/asm-powerpc/compat.h

@@ -119,7 +119,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-s390/compat.h b/include/asm-s390/compat.h
index 7f4ad62..de065b3 100644
--- a/include/asm-s390/compat.h
+++ b/include/asm-s390/compat.h

@@ -149,7 +149,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
index 01fe668..f260b58 100644
--- a/include/asm-sparc64/compat.h
+++ b/include/asm-sparc64/compat.h

@@ -152,7 +152,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-x86/compat.h b/include/asm-x86/compat.h
index b270ee0..d3e8f3e 100644
--- a/include/asm-x86/compat.h
+++ b/include/asm-x86/compat.h

@@ -190,7 +190,7 @@
  * A pointer passed in from user mode. This should not
  * be used for syscall parameters, just declare them
  * as pointers because the syscall entry code will have
- * appropriately comverted them already.
+ * appropriately converted them already.
  */
 typedef	u32		compat_uptr_t;
 

diff --git a/include/asm-x86/mach-voyager/do_timer.h b/include/asm-x86/mach-voyager/do_timer.h
index bc2b589..9e5a459 100644
--- a/include/asm-x86/mach-voyager/do_timer.h
+++ b/include/asm-x86/mach-voyager/do_timer.h

@@ -6,7 +6,6 @@
 
 /**
  * do_timer_interrupt_hook - hook into timer tick
- * @regs:     standard registers from interrupt
  *
  * Call the pit clock event handler. see asm/i8253.h
  **/

diff --git a/include/linux/aspm.h b/include/linux/aspm.h
deleted file mode 100644
index f41a698..0000000
--- a/include/linux/aspm.h
+++ /dev/null

@@ -1,44 +0,0 @@
-/*
- *	aspm.h
- *
- *	PCI Express ASPM defines and function prototypes
- *
- *	Copyright (C) 2007 Intel Corp.
- *		Zhang Yanmin (yanmin.zhang@intel.com)
- *		Shaohua Li (shaohua.li@intel.com)
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI Express Specification
- */
-
-#ifndef LINUX_ASPM_H
-#define LINUX_ASPM_H
-
-#include <linux/pci.h>
-
-#define PCIE_LINK_STATE_L0S	1
-#define PCIE_LINK_STATE_L1	2
-#define PCIE_LINK_STATE_CLKPM	4
-
-#ifdef CONFIG_PCIEASPM
-extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
-extern void pci_disable_link_state(struct pci_dev *pdev, int state);
-#else
-#define pcie_aspm_init_link_state(pdev)		do {} while (0)
-#define pcie_aspm_exit_link_state(pdev)		do {} while (0)
-#define pcie_aspm_pm_state_change(pdev)		do {} while (0)
-#define pci_disable_link_state(pdev, state)	do {} while (0)
-#endif
-
-#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
-extern void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
-extern void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
-#else
-#define pcie_aspm_create_sysfs_dev_files(pdev)	do {} while (0)
-#define pcie_aspm_remove_sysfs_dev_files(pdev)	do {} while (0)
-#endif
-#endif /* LINUX_ASPM_H */

diff --git a/include/linux/chio.h b/include/linux/chio.h
index a404c11..519248d 100644
--- a/include/linux/chio.h
+++ b/include/linux/chio.h

@@ -108,7 +108,7 @@
 
 /*
  * CHIOGELEM
- *    get more detailed status informtion for a single element
+ *    get more detailed status information for a single element
  */
 struct changer_get_element {
 	int	cge_type;	 /* type/unit */

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 8f3dcd3..504cb2c 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h

@@ -177,7 +177,7 @@
 	__u32	fpga_version;		/* FPGA Version Number Register */
 	__u32	cpu_start;		/* CPU start Register (write) */
 	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscelaneous Register */
+	__u32	misc_reg;		/* Miscellaneous Register */
 	__u32	idt_mode;		/* IDT mode Register */
 	__u32	uart_irq_status;	/* UART IRQ status Register */
 	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */

diff --git a/include/linux/cycx_x25.h b/include/linux/cycx_x25.h
index f7a9065..362bf19 100644
--- a/include/linux/cycx_x25.h
+++ b/include/linux/cycx_x25.h

@@ -81,7 +81,7 @@
  *	@n2win - level 2 window (values: 1 thru 7)
  *	@n3win - level 3 window (values: 1 thru 7)
  *	@nvc - # of logical channels (values: 1 thru 64)
- *	@pktlen - level 3 packet lenght - log base 2 of size
+ *	@pktlen - level 3 packet length - log base 2 of size
  *	@locaddr - my address
  *	@remaddr - remote address
  *	@t1 - time, in seconds

diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index 484e45c..aa07370 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h

@@ -525,6 +525,7 @@
 	__u64				dccps_gsr;
 	__u64				dccps_gar;
 	__be32				dccps_service;
+	__u32				dccps_mss_cache;
 	struct dccp_service_list	*dccps_service_list;
 	__u32				dccps_timestamp_echo;
 	__u32				dccps_timestamp_time;
@@ -533,7 +534,6 @@
 	__u16				dccps_pcslen;
 	__u16				dccps_pcrlen;
 	unsigned long			dccps_ndp_count;
-	__u32				dccps_mss_cache;
 	unsigned long			dccps_rate_last;
 	struct dccp_minisock		dccps_minisock;
 	struct dccp_ackvec		*dccps_hc_rx_ackvec;

diff --git a/include/linux/device.h b/include/linux/device.h
index db375be..479c0b3 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h

@@ -534,11 +534,17 @@
 extern void device_destroy(struct class *cls, dev_t devt);
 #ifdef CONFIG_PM_SLEEP
 extern void destroy_suspended_device(struct class *cls, dev_t devt);
+extern void device_pm_schedule_removal(struct device *);
 #else /* !CONFIG_PM_SLEEP */
 static inline void destroy_suspended_device(struct class *cls, dev_t devt)
 {
 	device_destroy(cls, devt);
 }
+
+static inline void device_pm_schedule_removal(struct device *dev)
+{
+	device_unregister(dev);
+}
 #endif /* !CONFIG_PM_SLEEP */
 
 /*

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 101a2d4..4470950 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h

@@ -1,5 +1,5 @@
-#ifndef _ASM_LINUX_DMA_MAPPING_H
-#define _ASM_LINUX_DMA_MAPPING_H
+#ifndef _LINUX_DMA_MAPPING_H
+#define _LINUX_DMA_MAPPING_H
 
 #include <linux/device.h>
 #include <linux/err.h>

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 55c9a69..5c84bf8 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h

@@ -29,7 +29,7 @@
 #include <linux/dma-mapping.h>
 
 /**
- * enum dma_state - resource PNP/power managment state
+ * enum dma_state - resource PNP/power management state
  * @DMA_RESOURCE_SUSPEND: DMA device going into low power state
  * @DMA_RESOURCE_RESUME: DMA device returning to full power
  * @DMA_RESOURCE_AVAILABLE: DMA device available to the system

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 71d4ada..fcbe8b6 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h

@@ -309,7 +309,7 @@
  * get_ringparam: Report ring sizes
  * set_ringparam: Set ring sizes
  * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause paramters
+ * set_pauseparam: Set pause parameters
  * get_rx_csum: Report whether receive checksums are turned on or off
  * set_rx_csum: Turn receive checksum on or off
  * get_tx_csum: Report whether transmit checksums are turned on or off

diff --git a/include/linux/fs.h b/include/linux/fs.h
index a516b67..56bd421 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h

@@ -872,6 +872,7 @@
 	struct list_head fl_block;	/* circular list of blocked processes */
 	fl_owner_t fl_owner;
 	unsigned int fl_pid;
+	struct pid *fl_nspid;
 	wait_queue_head_t fl_wait;
 	struct file *fl_file;
 	unsigned char fl_flags;
@@ -1307,7 +1308,7 @@
  *			being set.  find_inode() uses this to prevent returning
  *			nearly-dead inodes.
  * I_SYNC		Similar to I_LOCK, but limited in scope to writeback
- *			of inode dirty data.  Having a seperate lock for this
+ *			of inode dirty data.  Having a separate lock for this
  *			purpose reduces latency and prevents some filesystem-
  *			specific deadlocks.
  *

diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index 3882013..e38e759 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h

@@ -364,7 +364,7 @@
 #define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
 #define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
 #define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
-#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Lenght of 4 bytes */
+#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
 #define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
 #define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
 #define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */

diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 49067f1..f79dcba 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h

@@ -147,7 +147,6 @@
  * @get_time:		function to retrieve the current time of the clock
  * @get_softirq_time:	function to retrieve the current time from the softirq
  * @softirq_time:	the time when running the hrtimer queue in the softirq
- * @cb_pending:		list of timers where the callback is pending
  * @offset:		offset of this clock to the monotonic base
  * @reprogram:		function to reprogram the timer event
  */

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 5de6d91..f577c8f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h

@@ -287,6 +287,12 @@
 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
 #define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
 
+/* MIMO Power Save Modes */
+#define WLAN_HT_CAP_MIMO_PS_STATIC         0
+#define WLAN_HT_CAP_MIMO_PS_DYNAMIC        1
+#define WLAN_HT_CAP_MIMO_PS_INVALID        2
+#define WLAN_HT_CAP_MIMO_PS_DISABLED       3
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1

diff --git a/include/linux/init.h b/include/linux/init.h
index 2efbda0..90cdbbb 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h

@@ -124,9 +124,6 @@
 #define __REF            .section       ".ref.text", "ax"
 #define __REFDATA        .section       ".ref.data", "aw"
 #define __REFCONST       .section       ".ref.rodata", "aw"
-/* backward compatibility */
-#define __INIT_REFOK     .section	__REF
-#define __INITDATA_REFOK .section	__REFDATA
 
 #ifndef __ASSEMBLY__
 /*

diff --git a/include/linux/llc.h b/include/linux/llc.h
index 09f2e6d..7733585 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h

@@ -49,9 +49,9 @@
 
 /* LLC SAP types. */
 #define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
-#define LLC_SAP_LLC	0x02		/* LLC Sublayer Managment. 	*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
 #define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
-#define LLC_SAP_PNM	0x0E		/* Proway Network Managment.	*/	
+#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
 #define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
 #define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
 #define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/

diff --git a/include/linux/pci.h b/include/linux/pci.h
index 4f96f1d..cee75c0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h

@@ -128,7 +128,6 @@
 	u32 data[0];
 };
 
-struct pcie_link_state;
 /*
  * The pci_dev structure is used to describe PCI devices.
  */
@@ -164,10 +163,6 @@
 					   this is D0-D3, D0 being fully functional,
 					   and D3 being off. */
 
-#ifdef CONFIG_PCIEASPM
-	struct pcie_link_state	*link_state;	/* ASPM link state. */
-#endif
-
 	pci_channel_state_t error_state;	/* current connectivity state */
 	struct	device	dev;		/* Generic device interface */
 

diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c0c1223..c1914a8 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h

@@ -395,17 +395,9 @@
 #define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
 #define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
-#define  PCI_EXP_LNKCAP_ASPMS	0xc00	/* ASPM Support */
-#define  PCI_EXP_LNKCAP_L0SEL	0x7000	/* L0s Exit Latency */
-#define  PCI_EXP_LNKCAP_L1EL	0x38000	/* L1 Exit Latency */
-#define  PCI_EXP_LNKCAP_CLKPM	0x40000	/* L1 Clock Power Management */
 #define PCI_EXP_LNKCTL		16	/* Link Control */
-#define  PCI_EXP_LNKCTL_RL	0x20	/* Retrain Link */
-#define  PCI_EXP_LNKCTL_CCC	0x40	/* Common Clock COnfiguration */
 #define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
 #define PCI_EXP_LNKSTA		18	/* Link Status */
-#define  PCI_EXP_LNKSTA_LT	0x800	/* Link Training */
-#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
 #define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
 #define PCI_EXP_SLTCTL		24	/* Slot Control */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 554836e..5e43ae7 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h

@@ -88,7 +88,7 @@
 
 	/* A lock to ensure that only one thing can read/write
 	 * the MDIO bus at a time */
-	spinlock_t mdio_lock;
+	struct mutex mdio_lock;
 
 	struct device *dev;
 
@@ -284,10 +284,11 @@
 
 	/* Interrupt and Polling infrastructure */
 	struct work_struct phy_queue;
+	struct work_struct state_queue;
 	struct timer_list phy_timer;
 	atomic_t irq_disable;
 
-	spinlock_t lock;
+	struct mutex lock;
 
 	struct net_device *attached_dev;
 

diff --git a/include/linux/pm.h b/include/linux/pm.h
index b78e029..eccf59e 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h

@@ -95,7 +95,7 @@
 };
 
 /* Functions above this comment are list-based old-style power
- * managment. Please avoid using them.  */
+ * management. Please avoid using them.  */
 
 /*
  * Callbacks for platform drivers to implement.

diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 2a6d62c..b9339d8 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h

@@ -126,7 +126,7 @@
 };
 
 /*
- * Device Managemnt
+ * Device Management
  */
 
 struct pnp_card {

diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index b6116b4..b8ce2b4 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h

@@ -91,7 +91,7 @@
  *
  * For API usage, in general,
  * - any function _modifying_ the tree or tags (inserting or deleting
- *   items, setting or clearing tags must exclude other modifications, and
+ *   items, setting or clearing tags) must exclude other modifications, and
  *   exclude any functions reading the tree.
  * - any function _reading_ the tree or tags (looking up items or tags,
  *   gang lookups) must exclude modifications to the tree, but may occur

diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 10fa0c8..db5ef9b 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h

@@ -185,7 +185,7 @@
 	unsigned long j_trans_id;
 	unsigned long j_mount_id;
 	unsigned long j_start;	/* start of current waiting commit (index into j_ap_blocks) */
-	unsigned long j_len;	/* lenght of current waiting commit */
+	unsigned long j_len;	/* length of current waiting commit */
 	unsigned long j_len_alloc;	/* number of buffers requested by journal_begin() */
 	atomic_t j_wcount;	/* count of writers for current commit */
 	unsigned long j_bcount;	/* batch count. allows turning X transactions into 1 */

diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 86f9b1e..ea037f2 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h

@@ -29,7 +29,7 @@
 
 	/*
 	 * Pad strcture to 128 bytes. Remember to update the
-	 * pad size when you add new memebers. We use a fixed
+	 * pad size when you add new members. We use a fixed
 	 * size structure to avoid compatibility problems with
 	 * future versions, and we leave extra space for additional
 	 * members. We use fixed size members because this strcture

diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
index df7620d..64236b7 100644
--- a/include/linux/sm501-regs.h
+++ b/include/linux/sm501-regs.h

@@ -171,7 +171,7 @@
 /* USB slave/gadget data port base */
 #define SM501_USB_GADGET_DATA		(0x070000)
 
-/* Display contoller/video engine base */
+/* Display controller/video engine base */
 #define SM501_DC			(0x080000)
 
 /* common defines for the SM501 address registers */

diff --git a/include/linux/spinlock_api_up.h b/include/linux/spinlock_api_up.h
index 67faa04..04e1d31 100644
--- a/include/linux/spinlock_api_up.h
+++ b/include/linux/spinlock_api_up.h

@@ -21,7 +21,7 @@
 /*
  * In the UP-nondebug case there's no real locking going on, so the
  * only thing we have to do is to keep the preempt counts and irq
- * flags straight, to supress compiler warnings of unused lock
+ * flags straight, to suppress compiler warnings of unused lock
  * variables, and to add the proper checker annotations:
  */
 #define __LOCK(lock) \

diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 74e84ca..3160dfe 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h

@@ -1079,7 +1079,7 @@
  */
 struct iw_event
 {
-	__u16		len;			/* Real lenght of this stuff */
+	__u16		len;			/* Real length of this stuff */
 	__u16		cmd;			/* Wireless IOCTL */
 	union iwreq_data	u;		/* IOCTL fixed payload */
 };

diff --git a/include/media/rds.h b/include/media/rds.h
index 951c1ae..a894266 100644
--- a/include/media/rds.h
+++ b/include/media/rds.h

@@ -4,7 +4,7 @@
     saa6588.c and every driver (e.g. bttv-driver.c) that wants
     to use the saa6588 module.
 
-    Instead of having a seperate rds.h, I'd prefer to include
+    Instead of having a separate rds.h, I'd prefer to include
     this stuff in one of the already existing files like tuner.h
 
     (c) 2005 by Hans J. Koch

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index b24508a..b2cfc49 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h

@@ -112,13 +112,13 @@
 	struct ip6_sf_list	*mca_sources;
 	struct ip6_sf_list	*mca_tomb;
 	unsigned int		mca_sfmode;
+	unsigned char		mca_crcount;
 	unsigned long		mca_sfcount[2];
 	struct timer_list	mca_timer;
 	unsigned		mca_flags;
 	int			mca_users;
 	atomic_t		mca_refcnt;
 	spinlock_t		mca_lock;
-	unsigned char		mca_crcount;
 	unsigned long		mca_cstamp;
 	unsigned long		mca_tstamp;
 };
@@ -166,11 +166,11 @@
 	struct ifmcaddr6	*mc_list;
 	struct ifmcaddr6	*mc_tomb;
 	rwlock_t		mc_lock;
-	unsigned long		mc_v1_seen;
-	unsigned long		mc_maxdelay;
 	unsigned char		mc_qrv;
 	unsigned char		mc_gq_running;
 	unsigned char		mc_ifc_count;
+	unsigned long		mc_v1_seen;
+	unsigned long		mc_maxdelay;
 	struct timer_list	mc_gq_timer;	/* general query timer */
 	struct timer_list	mc_ifc_timer;	/* interface change timer */
 

diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index fdff630..62a5b69 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h

@@ -49,7 +49,7 @@
 	return inet6_ehashfn(laddr, lport, faddr, fport);
 }
 
-extern void __inet6_hash(struct inet_hashinfo *hashinfo, struct sock *sk);
+extern void __inet6_hash(struct sock *sk);
 
 /*
  * Sockets in TCP_CLOSE state are _always_ taken out of the hash, so

diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index 133cf30..f00f057 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h

@@ -29,7 +29,6 @@
 #undef INET_CSK_CLEAR_TIMERS
 
 struct inet_bind_bucket;
-struct inet_hashinfo;
 struct tcp_congestion_ops;
 
 /*
@@ -59,6 +58,8 @@
 				int level, int optname,
 				char __user *optval, int __user *optlen);
 	void	    (*addr2sockaddr)(struct sock *sk, struct sockaddr *);
+	int	    (*bind_conflict)(const struct sock *sk,
+				     const struct inet_bind_bucket *tb);
 };
 
 /** inet_connection_sock - INET connection oriented sock
@@ -244,10 +245,7 @@
 						const __be32 laddr);
 extern int inet_csk_bind_conflict(const struct sock *sk,
 				  const struct inet_bind_bucket *tb);
-extern int inet_csk_get_port(struct inet_hashinfo *hashinfo,
-			     struct sock *sk, unsigned short snum,
-			     int (*bind_conflict)(const struct sock *sk,
-						  const struct inet_bind_bucket *tb));
+extern int inet_csk_get_port(struct sock *sk, unsigned short snum);
 
 extern struct dst_entry* inet_csk_route_req(struct sock *sk,
 					    const struct request_sock *req);

diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index c23c4ed..48ac620 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h

@@ -221,9 +221,9 @@
 }
 
 /* Caller must disable local BH processing. */
-static inline void __inet_inherit_port(struct inet_hashinfo *table,
-				       struct sock *sk, struct sock *child)
+static inline void __inet_inherit_port(struct sock *sk, struct sock *child)
 {
+	struct inet_hashinfo *table = sk->sk_prot->hashinfo;
 	const int bhash = inet_bhashfn(inet_sk(child)->num, table->bhash_size);
 	struct inet_bind_hashbucket *head = &table->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -235,15 +235,14 @@
 	spin_unlock(&head->lock);
 }
 
-static inline void inet_inherit_port(struct inet_hashinfo *table,
-				     struct sock *sk, struct sock *child)
+static inline void inet_inherit_port(struct sock *sk, struct sock *child)
 {
 	local_bh_disable();
-	__inet_inherit_port(table, sk, child);
+	__inet_inherit_port(sk, child);
 	local_bh_enable();
 }
 
-extern void inet_put_port(struct inet_hashinfo *table, struct sock *sk);
+extern void inet_put_port(struct sock *sk);
 
 extern void inet_listen_wlock(struct inet_hashinfo *hashinfo);
 
@@ -266,41 +265,9 @@
 		wake_up(&hashinfo->lhash_wait);
 }
 
-extern void __inet_hash(struct inet_hashinfo *hashinfo, struct sock *sk);
-extern void __inet_hash_nolisten(struct inet_hashinfo *hinfo, struct sock *sk);
-
-static inline void inet_hash(struct inet_hashinfo *hashinfo, struct sock *sk)
-{
-	if (sk->sk_state != TCP_CLOSE) {
-		local_bh_disable();
-		__inet_hash(hashinfo, sk);
-		local_bh_enable();
-	}
-}
-
-static inline void inet_unhash(struct inet_hashinfo *hashinfo, struct sock *sk)
-{
-	rwlock_t *lock;
-
-	if (sk_unhashed(sk))
-		goto out;
-
-	if (sk->sk_state == TCP_LISTEN) {
-		local_bh_disable();
-		inet_listen_wlock(hashinfo);
-		lock = &hashinfo->lhash_lock;
-	} else {
-		lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
-		write_lock_bh(lock);
-	}
-
-	if (__sk_del_node_init(sk))
-		sock_prot_inuse_add(sk->sk_prot, -1);
-	write_unlock_bh(lock);
-out:
-	if (sk->sk_state == TCP_LISTEN)
-		wake_up(&hashinfo->lhash_wait);
-}
+extern void __inet_hash_nolisten(struct sock *sk);
+extern void inet_hash(struct sock *sk);
+extern void inet_unhash(struct sock *sk);
 
 extern struct sock *__inet_lookup_listener(struct net *net,
 					   struct inet_hashinfo *hashinfo,
@@ -425,7 +392,7 @@
 		struct sock *sk,
 		int (*check_established)(struct inet_timewait_death_row *,
 			struct sock *, __u16, struct inet_timewait_sock **),
-		void (*hash)(struct inet_hashinfo *, struct sock *));
+			       void (*hash)(struct sock *sk));
 extern int inet_hash_connect(struct inet_timewait_death_row *death_row,
 			     struct sock *sk);
 #endif /* _INET_HASHTABLES_H */

diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 67e9250..296547b 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h

@@ -116,6 +116,7 @@
 #define tw_hash			__tw_common.skc_hash
 #define tw_prot			__tw_common.skc_prot
 #define tw_net			__tw_common.skc_net
+	int			tw_timeout;
 	volatile unsigned char	tw_substate;
 	/* 3 bits hole, try to pack */
 	unsigned char		tw_rcv_wscale;
@@ -130,7 +131,6 @@
 	__u8			tw_ipv6only:1;
 	/* 15 bits hole, try to pack */
 	__u16			tw_ipv6_offset;
-	int			tw_timeout;
 	unsigned long		tw_ttd;
 	struct inet_bind_bucket	*tw_tb;
 	struct hlist_node	tw_death_node;

diff --git a/include/net/sock.h b/include/net/sock.h
index e3fb4c0..8a7889b 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h

@@ -496,6 +496,7 @@
 
 struct request_sock_ops;
 struct timewait_sock_ops;
+struct inet_hashinfo;
 
 /* Networking protocol blocks we attach to sockets.
  * socket layer -> transport layer interface
@@ -578,6 +579,8 @@
 	struct request_sock_ops	*rsk_prot;
 	struct timewait_sock_ops *twsk_prot;
 
+	struct inet_hashinfo	*hashinfo;
+
 	struct module		*owner;
 
 	char			name[32];

diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index e466d88..4769efd 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h

@@ -176,7 +176,7 @@
  * ports has a unique presense on the SAN, and may be instantiated via
  * NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a
  * unique presense, each vport has it's own view of the fabric,
- * authentication priviledge, and priorities.
+ * authentication privilege, and priorities.
  *
  * A virtual port may support 1 or more FC4 roles. Typically it is a
  * FCP Initiator. It could be a FCP Target, or exist sole for an IP over FC

diff --git a/init/Kconfig b/init/Kconfig
index dcc96a8..b2acdeb 100644
--- a/init/Kconfig
+++ b/init/Kconfig

@@ -665,6 +665,20 @@
 
 endchoice
 
+config PROFILING
+	bool "Profiling support (EXPERIMENTAL)"
+	help
+	  Say Y here to enable the extended profiling support mechanisms used
+	  by profilers such as OProfile.
+
+config MARKERS
+	bool "Activate markers"
+	help
+	  Place an empty function call at each marker site. Can be
+	  dynamically changed for a probe function.
+
+source "arch/Kconfig"
+
 endmenu		# General setup
 
 config SLABINFO

diff --git a/kernel/Kconfig.instrumentation b/kernel/Kconfig.instrumentation
deleted file mode 100644
index 468f47a..0000000
--- a/kernel/Kconfig.instrumentation
+++ /dev/null

@@ -1,49 +0,0 @@
-menuconfig INSTRUMENTATION
-	bool "Instrumentation Support"
-	default y
-	---help---
-	  Say Y here to get to see options related to performance measurement,
-	  system-wide debugging, and testing. This option alone does not add any
-	  kernel code.
-
-	  If you say N, all options in this submenu will be skipped and
-	  disabled. If you're trying to debug the kernel itself, go see the
-	  Kernel Hacking menu.
-
-if INSTRUMENTATION
-
-config PROFILING
-	bool "Profiling support (EXPERIMENTAL)"
-	help
-	  Say Y here to enable the extended profiling support mechanisms used
-	  by profilers such as OProfile.
-
-config OPROFILE
-	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING && !UML
-	depends on ARCH_SUPPORTS_OPROFILE || ALPHA || ARM || BLACKFIN || IA64 || M32R || PARISC || PPC || S390 || SUPERH || SPARC
-	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
-
-	  If unsure, say N.
-
-config KPROBES
-	bool "Kprobes"
-	depends on KALLSYMS && MODULES && !UML
-	depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-	  execute a callback function.  register_kprobe() establishes
-	  a probepoint and specifies the callback.  Kprobes is useful
-	  for kernel debugging, non-intrusive instrumentation and testing.
-	  If in doubt, say "N".
-
-config MARKERS
-	bool "Activate markers"
-	help
-	  Place an empty function call at each marker site. Can be
-	  dynamically changed for a probe function.
-
-endif # INSTRUMENTATION

diff --git a/kernel/Makefile b/kernel/Makefile
index 8885627..db9af70 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile

@@ -9,7 +9,7 @@
 	    rcupdate.o extable.o params.o posix-timers.o \
 	    kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
 	    hrtimer.o rwsem.o latency.o nsproxy.o srcu.o \
-	    utsname.o notifier.o
+	    utsname.o notifier.o ksysfs.o
 
 obj-$(CONFIG_SYSCTL) += sysctl_check.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
@@ -49,7 +49,6 @@
 obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_SYSFS) += ksysfs.o
 obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
 obj-$(CONFIG_SECCOMP) += seccomp.o

diff --git a/kernel/exit.c b/kernel/exit.c
index bfb1c0e..9e459fe 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c

@@ -50,8 +50,6 @@
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
 
-extern void sem_exit (void);
-
 static void exit_mm(struct task_struct * tsk);
 
 static void __unhash_process(struct task_struct *p)

diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 35b4bbf..36d563f 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c

@@ -493,7 +493,7 @@
 		goto retry;
 	else if (error) {
 		/*
-		 * Wierd looking, but we return EAGAIN if the IDR is
+		 * Weird looking, but we return EAGAIN if the IDR is
 		 * full (proper POSIX return value for this)
 		 */
 		error = -EAGAIN;

diff --git a/kernel/relay.c b/kernel/relay.c
index 61134eb..7c03733 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c

@@ -92,6 +92,7 @@
 		return -EINVAL;
 
 	vma->vm_ops = &relay_file_mmap_ops;
+	vma->vm_flags |= VM_DONTEXPAND;
 	vma->vm_private_data = buf;
 	buf->chan->cb->buf_mapped(buf, filp);
 

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0d8a5a4a78..0d385be 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug

@@ -81,7 +81,7 @@
 
 config DEBUG_SECTION_MISMATCH
 	bool "Enable full Section mismatch analysis"
-	default n
+	depends on UNDEFINED
 	help
 	  The section mismatch analysis checks if there are illegal
 	  references from one section to another section.
@@ -90,19 +90,19 @@
 	  most likely result in an oops.
 	  In the code functions and variables are annotated with
 	  __init, __devinit etc. (see full list in include/linux/init.h)
-	  which result in the code/data being placed in specific sections.
-	  The section mismatch anaylsis are always done after a full
-	  kernel build but enabling this options will in addition
+	  which results in the code/data being placed in specific sections.
+	  The section mismatch analysis is always done after a full
+	  kernel build but enabling this option will in addition
 	  do the following:
 	  - Add the option -fno-inline-functions-called-once to gcc
 	    When inlining a function annotated __init in a non-init
-	    function we would loose the section information and thus
+	    function we would lose the section information and thus
 	    the analysis would not catch the illegal reference.
-	    This options tell gcc to inline less but will also
+	    This option tells gcc to inline less but will also
 	    result in a larger kernel.
 	  - Run the section mismatch analysis for each module/built-in.o
 	    When we run the section mismatch analysis on vmlinux.o we
-	    looses valueable information about where the mismatch was
+	    lose valueble information about where the mismatch was
 	    introduced.
 	    Running the analysis for each module/built-in.o file
 	    will tell where the mismatch happens much closer to the

diff --git a/lib/crc32.c b/lib/crc32.c
index d2c2f25..49d1c9e 100644
--- a/lib/crc32.c
+++ b/lib/crc32.c

@@ -348,7 +348,7 @@
  * but again the multiple of the polynomial to subtract depends only on
  * the high bits, the high 8 bits in this case.  
  *
- * The multile we need in that case is the low 32 bits of a 40-bit
+ * The multiple we need in that case is the low 32 bits of a 40-bit
  * value whose high 8 bits are given, and which is a multiple of the
  * generator polynomial.  This is simply the CRC-32 of the given
  * one-byte message.

diff --git a/lib/kobject.c b/lib/kobject.c
index 1d63ead..d784dae 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c

@@ -637,7 +637,7 @@
  * @name: the name for the kset
  * @parent: the parent kobject of this kobject, if any.
  *
- * This function creates a kset structure dynamically and registers it
+ * This function creates a kobject structure dynamically and registers it
  * with sysfs.  When you are finished with this structure, call
  * kobject_put() and the structure will be dynamically freed when
  * it is no longer being used.

diff --git a/lib/zlib_deflate/defutil.h b/lib/zlib_deflate/defutil.h
index d9feaf6..6b15a90 100644
--- a/lib/zlib_deflate/defutil.h
+++ b/lib/zlib_deflate/defutil.h

@@ -164,7 +164,7 @@
     int nice_match; /* Stop searching when current match exceeds this */
 
                 /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
     struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
     struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
     struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */

diff --git a/mm/mmap.c b/mm/mmap.c
index d2b6d44..8295577 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c

@@ -2216,7 +2216,7 @@
 	vma->vm_start = addr;
 	vma->vm_end = addr + len;
 
-	vma->vm_flags = vm_flags | mm->def_flags;
+	vma->vm_flags = vm_flags | mm->def_flags | VM_DONTEXPAND;
 	vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
 
 	vma->vm_ops = &special_mapping_vmops;

diff --git a/mm/truncate.c b/mm/truncate.c
index cadc156..c3123b0 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c

@@ -21,7 +21,7 @@
 
 
 /**
- * do_invalidatepage - invalidate part of all of a page
+ * do_invalidatepage - invalidate part or all of a page
  * @page: the page which is affected
  * @offset: the index of the truncation point
  *

diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 26e941d..7b66083 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c

@@ -287,7 +287,7 @@
  *	@ops: pernet operations structure to manipulate
  *
  *	Remove the pernet operations structure from the list to be
- *	used when network namespaces are created or destoryed.  In
+ *	used when network namespaces are created or destroyed.  In
  *	addition run the exit method for all existing network
  *	namespaces.
  */
@@ -335,7 +335,7 @@
  *	@ops: pernet operations structure to manipulate
  *
  *	Remove the pernet operations structure from the list to be
- *	used when network namespaces are created or destoryed.  In
+ *	used when network namespaces are created or destroyed.  In
  *	addition run the exit method for all existing network
  *	namespaces.
  */

diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index ebe59d9..287a62b 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h

@@ -271,8 +271,6 @@
 
 extern int	   dccp_connect(struct sock *sk);
 extern int	   dccp_disconnect(struct sock *sk, int flags);
-extern void	   dccp_hash(struct sock *sk);
-extern void	   dccp_unhash(struct sock *sk);
 extern int	   dccp_getsockopt(struct sock *sk, int level, int optname,
 				   char __user *optval, int __user *optlen);
 extern int	   dccp_setsockopt(struct sock *sk, int level, int optname,

diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index c982ad8..474075a 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c

@@ -38,12 +38,6 @@
  */
 static struct socket *dccp_v4_ctl_socket;
 
-static int dccp_v4_get_port(struct sock *sk, const unsigned short snum)
-{
-	return inet_csk_get_port(&dccp_hashinfo, sk, snum,
-				 inet_csk_bind_conflict);
-}
-
 int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
 	struct inet_sock *inet = inet_sk(sk);
@@ -408,8 +402,8 @@
 
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
-	__inet_hash_nolisten(&dccp_hashinfo, newsk);
-	__inet_inherit_port(&dccp_hashinfo, sk, newsk);
+	__inet_hash_nolisten(newsk);
+	__inet_inherit_port(sk, newsk);
 
 	return newsk;
 
@@ -898,6 +892,7 @@
 	.getsockopt	   = ip_getsockopt,
 	.addr2sockaddr	   = inet_csk_addr2sockaddr,
 	.sockaddr_len	   = sizeof(struct sockaddr_in),
+	.bind_conflict	   = inet_csk_bind_conflict,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ip_setsockopt,
 	.compat_getsockopt = compat_ip_getsockopt,
@@ -937,10 +932,10 @@
 	.sendmsg		= dccp_sendmsg,
 	.recvmsg		= dccp_recvmsg,
 	.backlog_rcv		= dccp_v4_do_rcv,
-	.hash			= dccp_hash,
-	.unhash			= dccp_unhash,
+	.hash			= inet_hash,
+	.unhash			= inet_unhash,
 	.accept			= inet_csk_accept,
-	.get_port		= dccp_v4_get_port,
+	.get_port		= inet_csk_get_port,
 	.shutdown		= dccp_shutdown,
 	.destroy		= dccp_destroy_sock,
 	.orphan_count		= &dccp_orphan_count,
@@ -948,6 +943,7 @@
 	.obj_size		= sizeof(struct dccp_sock),
 	.rsk_prot		= &dccp_request_sock_ops,
 	.twsk_prot		= &dccp_timewait_sock_ops,
+	.hashinfo		= &dccp_hashinfo,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt	= compat_dccp_setsockopt,
 	.compat_getsockopt	= compat_dccp_getsockopt,

diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index ed0a005..490333d 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c

@@ -39,21 +39,15 @@
 static struct inet_connection_sock_af_ops dccp_ipv6_mapped;
 static struct inet_connection_sock_af_ops dccp_ipv6_af_ops;
 
-static int dccp_v6_get_port(struct sock *sk, unsigned short snum)
-{
-	return inet_csk_get_port(&dccp_hashinfo, sk, snum,
-				 inet6_csk_bind_conflict);
-}
-
 static void dccp_v6_hash(struct sock *sk)
 {
 	if (sk->sk_state != DCCP_CLOSED) {
 		if (inet_csk(sk)->icsk_af_ops == &dccp_ipv6_mapped) {
-			dccp_hash(sk);
+			inet_hash(sk);
 			return;
 		}
 		local_bh_disable();
-		__inet6_hash(&dccp_hashinfo, sk);
+		__inet6_hash(sk);
 		local_bh_enable();
 	}
 }
@@ -630,8 +624,8 @@
 
 	newinet->daddr = newinet->saddr = newinet->rcv_saddr = LOOPBACK4_IPV6;
 
-	__inet6_hash(&dccp_hashinfo, newsk);
-	inet_inherit_port(&dccp_hashinfo, sk, newsk);
+	__inet6_hash(newsk);
+	inet_inherit_port(sk, newsk);
 
 	return newsk;
 
@@ -1054,6 +1048,7 @@
 	.getsockopt	   = ipv6_getsockopt,
 	.addr2sockaddr	   = inet6_csk_addr2sockaddr,
 	.sockaddr_len	   = sizeof(struct sockaddr_in6),
+	.bind_conflict	   = inet6_csk_bind_conflict,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ipv6_setsockopt,
 	.compat_getsockopt = compat_ipv6_getsockopt,
@@ -1123,9 +1118,9 @@
 	.recvmsg	   = dccp_recvmsg,
 	.backlog_rcv	   = dccp_v6_do_rcv,
 	.hash		   = dccp_v6_hash,
-	.unhash		   = dccp_unhash,
+	.unhash		   = inet_unhash,
 	.accept		   = inet_csk_accept,
-	.get_port	   = dccp_v6_get_port,
+	.get_port	   = inet_csk_get_port,
 	.shutdown	   = dccp_shutdown,
 	.destroy	   = dccp_v6_destroy_sock,
 	.orphan_count	   = &dccp_orphan_count,
@@ -1133,6 +1128,7 @@
 	.obj_size	   = sizeof(struct dccp6_sock),
 	.rsk_prot	   = &dccp6_request_sock_ops,
 	.twsk_prot	   = &dccp6_timewait_sock_ops,
+	.hashinfo	   = &dccp_hashinfo,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_dccp_setsockopt,
 	.compat_getsockopt = compat_dccp_getsockopt,

diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 0bed4a6..e3f5d37 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c

@@ -78,7 +78,7 @@
 		sk->sk_prot->unhash(sk);
 		if (inet_csk(sk)->icsk_bind_hash != NULL &&
 		    !(sk->sk_userlocks & SOCK_BINDPORT_LOCK))
-			inet_put_port(&dccp_hashinfo, sk);
+			inet_put_port(sk);
 		/* fall through */
 	default:
 		if (oldstate == DCCP_OPEN)
@@ -173,20 +173,6 @@
 
 EXPORT_SYMBOL_GPL(dccp_state_name);
 
-void dccp_hash(struct sock *sk)
-{
-	inet_hash(&dccp_hashinfo, sk);
-}
-
-EXPORT_SYMBOL_GPL(dccp_hash);
-
-void dccp_unhash(struct sock *sk)
-{
-	inet_unhash(&dccp_hashinfo, sk);
-}
-
-EXPORT_SYMBOL_GPL(dccp_unhash);
-
 int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
@@ -268,7 +254,7 @@
 
 	/* Clean up a referenced DCCP bind bucket. */
 	if (inet_csk(sk)->icsk_bind_hash != NULL)
-		inet_put_port(&dccp_hashinfo, sk);
+		inet_put_port(sk);
 
 	kfree(dp->dccps_service_list);
 	dp->dccps_service_list = NULL;

diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index de5a41d..b189278 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c

@@ -78,11 +78,9 @@
 /* Obtain a reference to a local port for the given sock,
  * if snum is zero it means select any available local port.
  */
-int inet_csk_get_port(struct inet_hashinfo *hashinfo,
-		      struct sock *sk, unsigned short snum,
-		      int (*bind_conflict)(const struct sock *sk,
-					   const struct inet_bind_bucket *tb))
+int inet_csk_get_port(struct sock *sk, unsigned short snum)
 {
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
 	struct inet_bind_hashbucket *head;
 	struct hlist_node *node;
 	struct inet_bind_bucket *tb;
@@ -142,7 +140,7 @@
 			goto success;
 		} else {
 			ret = 1;
-			if (bind_conflict(sk, tb))
+			if (inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb))
 				goto fail_unlock;
 		}
 	}

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 48d4500..90f422c 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c

@@ -66,8 +66,9 @@
 /*
  * Get rid of any references to a local port held by the given sock.
  */
-static void __inet_put_port(struct inet_hashinfo *hashinfo, struct sock *sk)
+static void __inet_put_port(struct sock *sk)
 {
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
 	const int bhash = inet_bhashfn(inet_sk(sk)->num, hashinfo->bhash_size);
 	struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -81,10 +82,10 @@
 	spin_unlock(&head->lock);
 }
 
-void inet_put_port(struct inet_hashinfo *hashinfo, struct sock *sk)
+void inet_put_port(struct sock *sk)
 {
 	local_bh_disable();
-	__inet_put_port(hashinfo, sk);
+	__inet_put_port(sk);
 	local_bh_enable();
 }
 
@@ -317,8 +318,9 @@
 					  inet->dport);
 }
 
-void __inet_hash_nolisten(struct inet_hashinfo *hashinfo, struct sock *sk)
+void __inet_hash_nolisten(struct sock *sk)
 {
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
 	struct hlist_head *list;
 	rwlock_t *lock;
 	struct inet_ehash_bucket *head;
@@ -337,13 +339,14 @@
 }
 EXPORT_SYMBOL_GPL(__inet_hash_nolisten);
 
-void __inet_hash(struct inet_hashinfo *hashinfo, struct sock *sk)
+static void __inet_hash(struct sock *sk)
 {
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
 	struct hlist_head *list;
 	rwlock_t *lock;
 
 	if (sk->sk_state != TCP_LISTEN) {
-		__inet_hash_nolisten(hashinfo, sk);
+		__inet_hash_nolisten(sk);
 		return;
 	}
 
@@ -357,13 +360,48 @@
 	write_unlock(lock);
 	wake_up(&hashinfo->lhash_wait);
 }
-EXPORT_SYMBOL_GPL(__inet_hash);
+
+void inet_hash(struct sock *sk)
+{
+	if (sk->sk_state != TCP_CLOSE) {
+		local_bh_disable();
+		__inet_hash(sk);
+		local_bh_enable();
+	}
+}
+EXPORT_SYMBOL_GPL(inet_hash);
+
+void inet_unhash(struct sock *sk)
+{
+	rwlock_t *lock;
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
+
+	if (sk_unhashed(sk))
+		goto out;
+
+	if (sk->sk_state == TCP_LISTEN) {
+		local_bh_disable();
+		inet_listen_wlock(hashinfo);
+		lock = &hashinfo->lhash_lock;
+	} else {
+		lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
+		write_lock_bh(lock);
+	}
+
+	if (__sk_del_node_init(sk))
+		sock_prot_inuse_add(sk->sk_prot, -1);
+	write_unlock_bh(lock);
+out:
+	if (sk->sk_state == TCP_LISTEN)
+		wake_up(&hashinfo->lhash_wait);
+}
+EXPORT_SYMBOL_GPL(inet_unhash);
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 		struct sock *sk,
 		int (*check_established)(struct inet_timewait_death_row *,
 			struct sock *, __u16, struct inet_timewait_sock **),
-		void (*hash)(struct inet_hashinfo *, struct sock *))
+		void (*hash)(struct sock *sk))
 {
 	struct inet_hashinfo *hinfo = death_row->hashinfo;
 	const unsigned short snum = inet_sk(sk)->num;
@@ -427,7 +465,7 @@
 		inet_bind_hash(sk, tb, port);
 		if (sk_unhashed(sk)) {
 			inet_sk(sk)->sport = htons(port);
-			hash(hinfo, sk);
+			hash(sk);
 		}
 		spin_unlock(&head->lock);
 
@@ -444,7 +482,7 @@
 	tb  = inet_csk(sk)->icsk_bind_hash;
 	spin_lock_bh(&head->lock);
 	if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) {
-		hash(hinfo, sk);
+		hash(sk);
 		spin_unlock_bh(&head->lock);
 		return 0;
 	} else {

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index a0d373b..071e83a 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c

@@ -1669,7 +1669,7 @@
 		sk->sk_prot->unhash(sk);
 		if (inet_csk(sk)->icsk_bind_hash &&
 		    !(sk->sk_userlocks & SOCK_BINDPORT_LOCK))
-			inet_put_port(&tcp_hashinfo, sk);
+			inet_put_port(sk);
 		/* fall through */
 	default:
 		if (oldstate==TCP_ESTABLISHED)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 77c1939..63414ea 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c

@@ -108,22 +108,6 @@
 	.lhash_wait  = __WAIT_QUEUE_HEAD_INITIALIZER(tcp_hashinfo.lhash_wait),
 };
 
-static int tcp_v4_get_port(struct sock *sk, unsigned short snum)
-{
-	return inet_csk_get_port(&tcp_hashinfo, sk, snum,
-				 inet_csk_bind_conflict);
-}
-
-static void tcp_v4_hash(struct sock *sk)
-{
-	inet_hash(&tcp_hashinfo, sk);
-}
-
-void tcp_unhash(struct sock *sk)
-{
-	inet_unhash(&tcp_hashinfo, sk);
-}
-
 static inline __u32 tcp_v4_init_sequence(struct sk_buff *skb)
 {
 	return secure_tcp_sequence_number(ip_hdr(skb)->daddr,
@@ -1478,8 +1462,8 @@
 	}
 #endif
 
-	__inet_hash_nolisten(&tcp_hashinfo, newsk);
-	__inet_inherit_port(&tcp_hashinfo, sk, newsk);
+	__inet_hash_nolisten(newsk);
+	__inet_inherit_port(sk, newsk);
 
 	return newsk;
 
@@ -1827,6 +1811,7 @@
 	.getsockopt	   = ip_getsockopt,
 	.addr2sockaddr	   = inet_csk_addr2sockaddr,
 	.sockaddr_len	   = sizeof(struct sockaddr_in),
+	.bind_conflict	   = inet_csk_bind_conflict,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ip_setsockopt,
 	.compat_getsockopt = compat_ip_getsockopt,
@@ -1926,7 +1911,7 @@
 
 	/* Clean up a referenced TCP bind bucket. */
 	if (inet_csk(sk)->icsk_bind_hash)
-		inet_put_port(&tcp_hashinfo, sk);
+		inet_put_port(sk);
 
 	/*
 	 * If sendmsg cached page exists, toss it.
@@ -2435,9 +2420,9 @@
 	.getsockopt		= tcp_getsockopt,
 	.recvmsg		= tcp_recvmsg,
 	.backlog_rcv		= tcp_v4_do_rcv,
-	.hash			= tcp_v4_hash,
-	.unhash			= tcp_unhash,
-	.get_port		= tcp_v4_get_port,
+	.hash			= inet_hash,
+	.unhash			= inet_unhash,
+	.get_port		= inet_csk_get_port,
 	.enter_memory_pressure	= tcp_enter_memory_pressure,
 	.sockets_allocated	= &tcp_sockets_allocated,
 	.orphan_count		= &tcp_orphan_count,
@@ -2450,6 +2435,7 @@
 	.obj_size		= sizeof(struct tcp_sock),
 	.twsk_prot		= &tcp_timewait_sock_ops,
 	.rsk_prot		= &tcp_request_sock_ops,
+	.hashinfo		= &tcp_hashinfo,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt	= compat_tcp_setsockopt,
 	.compat_getsockopt	= compat_tcp_getsockopt,
@@ -2467,7 +2453,6 @@
 EXPORT_SYMBOL(ipv4_specific);
 EXPORT_SYMBOL(tcp_hashinfo);
 EXPORT_SYMBOL(tcp_prot);
-EXPORT_SYMBOL(tcp_unhash);
 EXPORT_SYMBOL(tcp_v4_conn_request);
 EXPORT_SYMBOL(tcp_v4_connect);
 EXPORT_SYMBOL(tcp_v4_do_rcv);

diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index d325a99..43f3993 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c

@@ -22,9 +22,9 @@
 #include <net/inet6_hashtables.h>
 #include <net/ip.h>
 
-void __inet6_hash(struct inet_hashinfo *hashinfo,
-				struct sock *sk)
+void __inet6_hash(struct sock *sk)
 {
+	struct inet_hashinfo *hashinfo = sk->sk_prot->hashinfo;
 	struct hlist_head *list;
 	rwlock_t *lock;
 

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 59d0029..12750f2 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c

@@ -86,12 +86,6 @@
 static struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
 #endif
 
-static int tcp_v6_get_port(struct sock *sk, unsigned short snum)
-{
-	return inet_csk_get_port(&tcp_hashinfo, sk, snum,
-				 inet6_csk_bind_conflict);
-}
-
 static void tcp_v6_hash(struct sock *sk)
 {
 	if (sk->sk_state != TCP_CLOSE) {
@@ -100,7 +94,7 @@
 			return;
 		}
 		local_bh_disable();
-		__inet6_hash(&tcp_hashinfo, sk);
+		__inet6_hash(sk);
 		local_bh_enable();
 	}
 }
@@ -1504,8 +1498,8 @@
 	}
 #endif
 
-	__inet6_hash(&tcp_hashinfo, newsk);
-	inet_inherit_port(&tcp_hashinfo, sk, newsk);
+	__inet6_hash(newsk);
+	inet_inherit_port(sk, newsk);
 
 	return newsk;
 
@@ -1833,6 +1827,7 @@
 	.getsockopt	   = ipv6_getsockopt,
 	.addr2sockaddr	   = inet6_csk_addr2sockaddr,
 	.sockaddr_len	   = sizeof(struct sockaddr_in6),
+	.bind_conflict	   = inet6_csk_bind_conflict,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ipv6_setsockopt,
 	.compat_getsockopt = compat_ipv6_getsockopt,
@@ -1864,6 +1859,7 @@
 	.getsockopt	   = ipv6_getsockopt,
 	.addr2sockaddr	   = inet6_csk_addr2sockaddr,
 	.sockaddr_len	   = sizeof(struct sockaddr_in6),
+	.bind_conflict	   = inet6_csk_bind_conflict,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ipv6_setsockopt,
 	.compat_getsockopt = compat_ipv6_getsockopt,
@@ -2127,8 +2123,8 @@
 	.recvmsg		= tcp_recvmsg,
 	.backlog_rcv		= tcp_v6_do_rcv,
 	.hash			= tcp_v6_hash,
-	.unhash			= tcp_unhash,
-	.get_port		= tcp_v6_get_port,
+	.unhash			= inet_unhash,
+	.get_port		= inet_csk_get_port,
 	.enter_memory_pressure	= tcp_enter_memory_pressure,
 	.sockets_allocated	= &tcp_sockets_allocated,
 	.memory_allocated	= &tcp_memory_allocated,
@@ -2141,6 +2137,7 @@
 	.obj_size		= sizeof(struct tcp6_sock),
 	.twsk_prot		= &tcp6_timewait_sock_ops,
 	.rsk_prot		= &tcp6_request_sock_ops,
+	.hashinfo		= &tcp_hashinfo,
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt	= compat_tcp_setsockopt,
 	.compat_getsockopt	= compat_tcp_getsockopt,

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 09c2550..e77592d 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig

@@ -98,6 +98,18 @@
 
 	  Say N unless you know you need this.
 
+config MAC80211_DEBUG_PACKET_ALIGNMENT
+	bool "Enable packet alignment debugging"
+	depends on MAC80211
+	help
+	  This option is recommended for driver authors and strongly
+	  discouraged for everybody else, it will trigger a warning
+	  when a driver hands mac80211 a buffer that is aligned in
+	  a way that will cause problems with the IP stack on some
+	  architectures.
+
+	  Say N unless you're writing a mac80211 based driver.
+
 config MAC80211_DEBUG
 	bool "Enable debugging output"
 	depends on MAC80211

diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 5dcc2d6..67b7c75 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c

@@ -1344,17 +1344,17 @@
 
 	ret = rc80211_simple_init();
 	if (ret)
-		goto fail;
+		goto out;
 
 	ret = rc80211_pid_init();
 	if (ret)
-		goto fail_simple;
+		goto out_cleanup_simple;
 
 	ret = ieee80211_wme_register();
 	if (ret) {
 		printk(KERN_DEBUG "ieee80211_init: failed to "
 		       "initialize WME (err=%d)\n", ret);
-		goto fail_pid;
+		goto out_cleanup_pid;
 	}
 
 	ieee80211_debugfs_netdev_init();
@@ -1362,11 +1362,11 @@
 
 	return 0;
 
- fail_pid:
-	rc80211_simple_exit();
- fail_simple:
+ out_cleanup_pid:
 	rc80211_pid_exit();
- fail:
+ out_cleanup_simple:
+	rc80211_simple_exit();
+ out:
 	return ret;
 }
 

diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 554c4ba..c339571 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c

@@ -538,7 +538,7 @@
 	return ieee80211_rate_control_register(&mac80211_rcpid);
 }
 
-void __exit rc80211_pid_exit(void)
+void rc80211_pid_exit(void)
 {
 	ieee80211_rate_control_unregister(&mac80211_rcpid);
 }

diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c
index 934676d..9a78b11 100644
--- a/net/mac80211/rc80211_simple.c
+++ b/net/mac80211/rc80211_simple.c

@@ -389,7 +389,7 @@
 	return ieee80211_rate_control_register(&mac80211_rcsimple);
 }
 
-void __exit rc80211_simple_exit(void)
+void rc80211_simple_exit(void)
 {
 	ieee80211_rate_control_unregister(&mac80211_rcsimple);
 }

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index d44c872..535407d 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c

@@ -340,11 +340,15 @@
 	return load;
 }
 
+#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
 static ieee80211_txrx_result
 ieee80211_rx_h_verify_ip_alignment(struct ieee80211_txrx_data *rx)
 {
 	int hdrlen;
 
+	if (!WLAN_FC_DATA_PRESENT(rx->fc))
+		return TXRX_CONTINUE;
+
 	/*
 	 * Drivers are required to align the payload data in a way that
 	 * guarantees that the contained IP header is aligned to a four-
@@ -371,11 +375,14 @@
 
 	return TXRX_CONTINUE;
 }
+#endif
 
 ieee80211_rx_handler ieee80211_rx_pre_handlers[] =
 {
 	ieee80211_rx_h_parse_qos,
+#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
 	ieee80211_rx_h_verify_ip_alignment,
+#endif
 	NULL
 };
 

diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 6562f86..1a47f5d 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c

@@ -340,7 +340,7 @@
  * rfkill_free - Mark rfkill structure for deletion
  * @rfkill: rfkill structure to be destroyed
  *
- * Decrements reference count of rfkill structure so it is destoryed.
+ * Decrements reference count of rfkill structure so it is destroyed.
  * Note that rfkill_free() should _not_ be called after rfkill_unregister().
  */
 void rfkill_free(struct rfkill *rfkill)

diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 61cbd5a..5df0c4b 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c

@@ -537,7 +537,7 @@
 		 *
 		 * This means that if we only want to abort associations
 		 * in an authenticated way (i.e AUTH+ABORT), then we
-		 * can't destory this association just becuase the packet
+		 * can't destroy this association just becuase the packet
 		 * was malformed.
 		 */
 		if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
@@ -4130,7 +4130,7 @@
 	 *
 	 * This means that if we only want to abort associations
 	 * in an authenticated way (i.e AUTH+ABORT), then we
-	 * can't destory this association just becuase the packet
+	 * can't destroy this association just becuase the packet
 	 * was malformed.
 	 */
 	if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))

diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 50e61c4..734cf4f 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c

@@ -821,6 +821,7 @@
 				return;
 			if (!conf_read(dialog_input_result)) {
 				set_config_filename(dialog_input_result);
+				sym_set_change_count(1);
 				return;
 			}
 			show_textbox(NULL, _("File does not exist!"), 5, 38);

diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index fdad173..606ceb9 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c

@@ -203,12 +203,9 @@
 				prop_warn(prop,
 				    "config symbol '%s' uses select, but is "
 				    "not boolean or tristate", sym->name);
-			else if (sym2->type == S_UNKNOWN)
-				prop_warn(prop,
-				    "'select' used by config symbol '%s' "
-				    "refers to undefined symbol '%s'",
-				    sym->name, sym2->name);
-			else if (sym2->type != S_BOOLEAN && sym2->type != S_TRISTATE)
+			else if (sym2->type != S_UNKNOWN &&
+			         sym2->type != S_BOOLEAN &&
+			         sym2->type != S_TRISTATE)
 				prop_warn(prop,
 				    "'%s' has wrong type. 'select' only "
 				    "accept arguments of boolean and "

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index f8efc93..5d54646 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c

@@ -870,7 +870,7 @@
 /* Do not export init/exit functions or data */
 {
 	.fromsec = { "__ksymtab*", NULL },
-	.tosec   = { ALL_INIT_SECTIONS, ALL_EXIT_SECTIONS, NULL },
+	.tosec   = { INIT_SECTIONS, EXIT_SECTIONS, NULL },
 	.mismatch = EXPORT_TO_INIT_EXIT
 }
 };
@@ -1125,15 +1125,15 @@
 	to = to_is_func ? "function" : "variable";
 	to_p = to_is_func ? "()" : "";
 
+	sec_mismatch_count++;
+	if (!sec_mismatch_verbose)
+		return;
+
 	fprintf(stderr, "WARNING: %s(%s+0x%llx): Section mismatch in"
 	                " reference from the %s %s%s to the %s %s:%s%s\n",
                         modname, fromsec, fromaddr, from, fromsym, from_p,
 	                to, tosec, tosym, to_p);
 
-	sec_mismatch_count++;
-	if (!sec_mismatch_verbose)
-		return;
-
 	switch (mismatch) {
 	case TEXT_TO_INIT:
 		fprintf(stderr,
@@ -1939,10 +1939,9 @@
 		write_dump(dump_write);
 	if (sec_mismatch_count && !sec_mismatch_verbose)
 		fprintf(stderr, "modpost: Found %d section mismatch(es).\n"
-		        "To see additional details select \"Enable full "
-		        "Section mismatch analysis\"\n"
-		        "in the Kernel Hacking menu "
-		        "(CONFIG_SECTION_MISMATCH).\n", sec_mismatch_count);
+		        "To see full details build your kernel with:\n"
+		        "'make CONFIG_DEBUG_SECTION_MISMATCH=y'\n",
+		        sec_mismatch_count);
 
 	return err;
 }

diff --git a/scripts/setlocalversion b/scripts/setlocalversion
old mode 100644
new mode 100755
index 52f032e..1c1bdaf
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion

@@ -45,3 +45,19 @@
 	# All done with mercurial
 	exit
 fi
+
+# Check for svn and a svn repo.
+if rev=`svn info 2>/dev/null | grep '^Revision'`; then
+	rev=`echo $rev | awk '{print $NF}'`
+	changes=`svn status 2>/dev/null | grep '^[AMD]' | wc -l`
+
+	# Are there uncommitted changes?
+	if [ $changes != 0 ]; then
+		printf -- '-svn%s%s%s' "$rev" -dirty "$changes"
+	else
+		printf -- '-svn%s' "$rev"
+	fi
+
+	# All done with svn
+	exit
+fi

diff --git a/sound/oss/via82cxxx_audio.c b/sound/oss/via82cxxx_audio.c
index 5d3c037..f95aa09 100644
--- a/sound/oss/via82cxxx_audio.c
+++ b/sound/oss/via82cxxx_audio.c

@@ -2104,6 +2104,7 @@
 {
 	struct via_info *card = vma->vm_private_data;
 	struct via_channel *chan = &card->ch_out;
+	unsigned long max_bufs;
 	struct page *dmapage;
 	unsigned long pgoff;
 	int rd, wr;
@@ -2127,14 +2128,11 @@
 	rd = card->ch_in.is_mapped;
 	wr = card->ch_out.is_mapped;
 
-#ifndef VIA_NDEBUG
-	{
-	unsigned long max_bufs = chan->frag_number;
-	if (rd && wr) max_bufs *= 2;
-	/* via_dsp_mmap() should ensure this */
-	assert (pgoff < max_bufs);
-	}
-#endif
+	max_bufs = chan->frag_number;
+	if (rd && wr)
+		max_bufs *= 2;
+	if (pgoff >= max_bufs)
+		return NOPAGE_SIGBUS;
 
 	/* if full-duplex (read+write) and we have two sets of bufs,
 	 * then the playback buffers come first, sez soundcard.c */

diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 6495534e..1558a5c 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c

@@ -84,7 +84,7 @@
 		us428->us428ctls_sharedmem->CtlSnapShotLast = -2;
 	}
 	area->vm_ops = &us428ctls_vm_ops;
-	area->vm_flags |= VM_RESERVED;
+	area->vm_flags |= VM_RESERVED | VM_DONTEXPAND;
 	area->vm_private_data = hw->private_data;
 	return 0;
 }

diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 800b5ce..117946f 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c

@@ -722,7 +722,7 @@
 		return -ENODEV;
 	}
 	area->vm_ops = &snd_usX2Y_hwdep_pcm_vm_ops;
-	area->vm_flags |= VM_RESERVED;
+	area->vm_flags |= VM_RESERVED | VM_DONTEXPAND;
 	area->vm_private_data = hw->private_data;
 	return 0;
 }
commit	93890b71a34f9490673a6edd56b61c2124215e46	[log] [tgz]
author	Linus Torvalds <torvalds@linux-foundation.org>	Mon Feb 04 08:00:54 2008 -0800
committer	Linus Torvalds <torvalds@linux-foundation.org>	Mon Feb 04 08:00:54 2008 -0800
tree	c5d82620f2cb69f0bf43639e63f54b0c0e2eb744
parent	f5bb3a5e9dcdb8435471562b6cada89525cf4df1 [diff]
parent	6b35e40767c6c1ac783330109ae8e0c09ea6bc82 [diff]