mmc: core: fix power class selection
mmc_select_powerclass() function returns error if eMMC
VDD level supported by host is between 2.7v to 3.2v.
According to eMMC specification, valid voltage for high
voltage cards is 2.7v to 3.6v. This patch ensures that
2.7v to 3.6v VDD range is treated as valid range.
Also, failure to set the power class shouldn't be treated
as fatal error because even if setting the power class
fails, card can still work in default power class.
If mmc_select_powerclass() returns error, just print
the warning message and go ahead with rest of the card
initialization.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Girish K S <girish.shivananjappa@linaro.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 02914d6..54df5ad 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -695,6 +695,11 @@
else if (host->ios.clock <= 200000000)
index = EXT_CSD_PWR_CL_200_195;
break;
+ case MMC_VDD_27_28:
+ case MMC_VDD_28_29:
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ case MMC_VDD_31_32:
case MMC_VDD_32_33:
case MMC_VDD_33_34:
case MMC_VDD_34_35:
@@ -1111,11 +1116,10 @@
ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
- if (err) {
- pr_err("%s: power class selection to bus width %d failed\n",
- mmc_hostname(card->host), 1 << bus_width);
- goto err;
- }
+ if (err)
+ pr_warning("%s: power class selection to bus width %d"
+ " failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
}
/*
@@ -1147,10 +1151,10 @@
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d failed\n",
- mmc_hostname(card->host),
- 1 << bus_width);
+ pr_warning("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -1178,10 +1182,10 @@
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d ddr %d failed\n",
- mmc_hostname(card->host),
- 1 << bus_width, ddr);
+ pr_warning("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,