[PATCH] libertas: reorganize and simplify init sequence
This patch moves all firmware load responsibility into the interface-specific
code and gets rid of the firmware pointer in the generic card structure. It
also removes 3 fairly unecessary callbacks: hw_register_dev, hw_unregister_dev,
and hw_prog_firmware. It also makes the init sequence from interface
probe functions more logical, as there are paired add/remove and start/stop
calls into generic libertas code.
Because the USB driver code uses the same TX URB callback for both firmware
upload (where the generic libertas structure isn't initialized yet) and for
normal operation (where it is), some bits of USB code have to deal with
'priv' being NULL. All USB firmware upload bits have been changed to not
require 'priv' at all, but simply the USB card structure.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 888f023..4dffc5c 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -608,51 +608,6 @@
/* Callback functions for libertas.ko */
/********************************************************************/
-static int if_cs_register_dev(wlan_private *priv)
-{
- struct if_cs_card *card = (struct if_cs_card *)priv->card;
-
- lbs_deb_enter(LBS_DEB_CS);
-
- card->priv = priv;
-
- return 0;
-}
-
-
-static int if_cs_unregister_dev(wlan_private *priv)
-{
- lbs_deb_enter(LBS_DEB_CS);
-
- /*
- * Nothing special here. Because the device's power gets turned off
- * anyway, there's no need to send a RESET command like in if_usb.c
- */
-
- return 0;
-}
-
-
-/*
- * This callback is a dummy. The reason is that the USB code needs
- * to have various things set up in order to be able to download the
- * firmware. That's not needed in our case.
- *
- * On the contrary, if libertas_add_card() has been called and we're
- * then later called via libertas_activate_card(), but without a valid
- * firmware, then it's quite tedious to tear down the half-installed
- * card. Therefore, we download the firmware before calling adding/
- * activating the card in the first place. If that doesn't work, we
- * won't call into libertas.ko at all.
- */
-
-static int if_cs_prog_firmware(wlan_private *priv)
-{
- priv->adapter->fw_ready = 1;
- return 0;
-}
-
-
/* Send commands or data packets to the card */
static int if_cs_host_to_card(wlan_private *priv, u8 type, u8 *buf, u16 nb)
{
@@ -902,14 +857,14 @@
}
/* Store pointers to our call-back functions */
+ card->priv = priv;
priv->card = card;
- priv->hw_register_dev = if_cs_register_dev;
- priv->hw_unregister_dev = if_cs_unregister_dev;
- priv->hw_prog_firmware = if_cs_prog_firmware;
priv->hw_host_to_card = if_cs_host_to_card;
priv->hw_get_int_status = if_cs_get_int_status;
priv->hw_read_event_cause = if_cs_read_event_cause;
+ priv->adapter->fw_ready = 1;
+
/* Now actually get the IRQ */
ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
@@ -919,7 +874,7 @@
}
/* And finally bring the card up */
- if (libertas_activate_card(priv) != 0) {
+ if (libertas_start_card(priv) != 0) {
lbs_pr_err("could not activate card\n");
goto out3;
}
@@ -951,6 +906,7 @@
lbs_deb_enter(LBS_DEB_CS);
+ libertas_stop_card(card->priv);
libertas_remove_card(card->priv);
if_cs_release(p_dev);
kfree(card);