Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Conflicts:
arch/arm/mach-at91/gpio.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c2ca1d..9633fb0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -622,7 +622,7 @@
M: dirk@opfer-online.de
S: Maintained
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5,PALMLD SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87..12abdd4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -241,6 +241,7 @@
config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
This enables support for systems based on the Atmel AT91RM9200,
@@ -1092,7 +1093,7 @@
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+ depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 192ee01..a71fd94 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,18 +2,29 @@
source "lib/Kconfig.debug"
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
- default y
+ default y if !ARM_UNWIND
help
If you say N here, the resulting kernel will be slightly smaller and
- faster. However, when a problem occurs with the kernel, the
- information that is reported is severely limited. Most people
- should say Y here.
+ faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+ when a problem occurs with the kernel, the information that is
+ reported is severely limited.
+
+config ARM_UNWIND
+ bool "Enable stack unwinding support"
+ depends on AEABI && EXPERIMENTAL
+ default y
+ help
+ This option enables stack unwinding support in the kernel
+ using the information automatically generated by the
+ compiler. The resulting kernel image is slightly bigger but
+ the performance is not affected. Currently, this feature
+ only works with EABI compilers. If unsure say Y.
config DEBUG_USER
bool "Verbose user fault messages"
@@ -66,7 +77,7 @@
Say Y here if you want the debug print routines to direct their
output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
- channel.
+ channel and on the XScale with the PEEDI.
It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 24e0f01..e7ef876e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -85,6 +85,10 @@
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
endif
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI +=-funwind-tables
+endif
+
# Need -Uarm for gcc < 3.x
KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d61423..d1b678d 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,12 @@
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+ mcr p14, 0, \ch, c8, c0, 0
+ .endm
#else
.macro loadsp, rb
.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 3fc0841..393c816 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -46,6 +46,21 @@
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+ int status, i = 0x4000000;
+
+ do {
+ if (--i < 0)
+ return;
+
+ asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+ } while (status & (1 << 28));
+
+ asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
#else
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 153a07e..a5924b9 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -11,6 +11,11 @@
ENTRY(_start)
SECTIONS
{
+ /DISCARD/ : {
+ *(.ARM.exidx*)
+ *(.ARM.extab*)
+ }
+
. = TEXT_START;
_text = .;
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 780bbf7..140f1d7 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -29,8 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
#include <mach/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
new file mode 100644
index 0000000..1cab4e7
--- /dev/null
+++ b/arch/arm/configs/acs5k_defconfig
@@ -0,0 +1,1233 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Dec 16 13:31:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+CONFIG_MACH_DSM320=y
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
new file mode 100644
index 0000000..8e3d084
--- /dev/null
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -0,0 +1,941 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Jan 6 13:23:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+# CONFIG_MACH_KS8695 is not set
+# CONFIG_MACH_DSM320 is not set
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index b1cd331..c66dd39 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -89,7 +89,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 80222fe..f264846 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_BADGE4=y
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index ee130b5..2b4c066 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -93,7 +93,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
similarity index 83%
rename from arch/arm/configs/xm_x2xx_defconfig
rename to arch/arm/configs/cm_x2xx_defconfig
index 1039f366..797b790 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct 5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:31:36 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,7 +22,6 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -47,12 +46,12 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -80,27 +79,21 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -108,11 +101,9 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -129,6 +120,11 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -138,7 +134,6 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -165,17 +160,19 @@
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
@@ -185,7 +182,9 @@
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
-CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
@@ -204,14 +203,6 @@
# CONFIG_PXA_PWM is not set
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -232,6 +223,8 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -242,6 +235,7 @@
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
@@ -287,14 +281,13 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -327,6 +320,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -345,6 +340,7 @@
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -389,6 +385,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -399,6 +396,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -420,8 +418,6 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
@@ -434,15 +430,15 @@
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -467,6 +463,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -521,9 +518,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
@@ -535,6 +530,8 @@
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -563,6 +560,12 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -642,6 +645,8 @@
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -756,26 +761,30 @@
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
+CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
@@ -783,10 +792,12 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -797,8 +808,6 @@
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
# CONFIG_LIBERTAS_CS is not set
@@ -811,10 +820,16 @@
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -879,22 +894,22 @@
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -933,6 +948,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
@@ -1009,26 +1025,45 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -1043,17 +1078,19 @@
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -1064,11 +1101,17 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
+CONFIG_UCB1400_CORE=m
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1077,13 +1120,117 @@
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
@@ -1095,6 +1242,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1128,6 +1276,7 @@
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -1138,13 +1287,17 @@
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
@@ -1167,6 +1320,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1182,81 +1336,16 @@
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
@@ -1269,9 +1358,37 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1291,12 +1408,15 @@
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -1306,6 +1426,8 @@
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -1314,20 +1436,20 @@
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1355,6 +1477,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1371,13 +1494,20 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,11 +1515,12 @@
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
@@ -1400,8 +1531,7 @@
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
+CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_PCA955X is not set
#
@@ -1410,6 +1540,7 @@
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1441,37 +1572,43 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1483,14 +1620,16 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1520,15 +1659,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1548,6 +1685,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1567,6 +1705,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1678,19 +1817,29 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1705,13 +1854,16 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1783,14 +1935,18 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index f7622e6..1aa6224 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -113,7 +113,6 @@
CONFIG_SA1100_COLLIE=y
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/em_x270_defconfig
similarity index 74%
copy from arch/arm/configs/xm_x2xx_defconfig
copy to arch/arm/configs/em_x270_defconfig
index 1039f366..e9955b7 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct 5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:43:31 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -47,12 +45,12 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -80,27 +78,20 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -108,11 +99,9 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -129,6 +118,11 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -138,7 +132,6 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -165,17 +158,19 @@
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
@@ -185,33 +180,26 @@
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
-CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -232,36 +220,14 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
+# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
-# CONFIG_YENTA_ENE_TUNE is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_PCCARD is not set
#
# Kernel Features
@@ -287,14 +253,12 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -309,7 +273,21 @@
#
# CPU Power Management
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_IDLE is not set
#
@@ -327,6 +305,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -338,13 +318,14 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=m
+CONFIG_APM_EMULATION=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -389,6 +370,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -399,6 +381,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -420,29 +403,23 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -467,6 +444,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -521,20 +499,18 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
-# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -551,32 +527,31 @@
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_GPIO=m
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -625,117 +600,10 @@
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -743,78 +611,47 @@
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -822,10 +659,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -838,7 +672,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,7 +694,7 @@
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
+CONFIG_INPUT_APMPOWER=y
#
# Input Device Drivers
@@ -873,15 +706,18 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -895,6 +731,7 @@
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -902,7 +739,6 @@
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -917,7 +753,6 @@
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -931,26 +766,16 @@
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
@@ -961,24 +786,6 @@
#
#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
@@ -995,11 +802,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1015,20 +817,39 @@
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -1038,22 +859,29 @@
#
# PCI GPIO expanders:
#
-# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -1065,10 +893,16 @@
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1077,24 +911,121 @@
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1113,38 +1044,27 @@
#
# Frame buffer hardware drivers
#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
+# CONFIG_FB_MBX_DEBUG is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
#
# Display device support
@@ -1167,6 +1087,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1182,82 +1103,21 @@
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
@@ -1269,13 +1129,41 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -1291,21 +1179,22 @@
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -1314,20 +1203,20 @@
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1355,6 +1244,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1371,13 +1261,19 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,12 +1281,11 @@
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
@@ -1401,8 +1296,8 @@
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=y
#
# LED Triggers
@@ -1410,6 +1305,7 @@
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1441,37 +1337,48 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=y
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1483,14 +1390,17 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1520,15 +1430,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1548,6 +1456,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1567,6 +1476,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1652,7 +1562,7 @@
CONFIG_FRAME_WARN=0
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -1678,19 +1588,29 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1705,13 +1625,24 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1731,7 +1662,7 @@
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
@@ -1748,7 +1679,7 @@
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
@@ -1762,9 +1693,9 @@
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
@@ -1783,14 +1714,18 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 8f986e9..f2e16fd 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_H3XXX=y
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 1c8fb89..db0708d 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
CONFIG_SA1100_HACKKIT=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 81fadaf..f3074e4 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -178,7 +178,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
CONFIG_SA1100_JORNADA720=y
CONFIG_SA1100_JORNADA720_SSP=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index a1cc34f..56ae568 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -87,7 +87,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 73ba62b..82428c2 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Sun Dec 30 13:02:54 2007
+# Linux kernel version: 2.6.29-rc3
+# Fri Jan 30 12:42:03 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
@@ -12,6 +13,7 @@
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +23,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,16 +43,24 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -65,31 +75,41 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -103,8 +123,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -114,9 +133,7 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -130,41 +147,58 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
CONFIG_MACH_MAGICIAN=y
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
#
# Processor Type
@@ -173,6 +207,7 @@
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -186,6 +221,7 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -197,28 +233,33 @@
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -229,9 +270,10 @@
CONFIG_CMDLINE="keepinitrd"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
@@ -239,6 +281,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -247,6 +290,7 @@
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -263,6 +307,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -270,21 +316,18 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -316,33 +359,15 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -353,6 +378,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -390,20 +416,17 @@
# Dongle support
#
# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -417,17 +440,17 @@
#
# Bluetooth device drivers
#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -442,25 +465,28 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@@ -473,6 +499,7 @@
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -487,6 +514,7 @@
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
@@ -497,9 +525,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PXA2XX is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_SHARP_SL is not set
@@ -523,6 +549,12 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -531,10 +563,12 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -547,7 +581,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -563,6 +596,20 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -612,7 +659,26 @@
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
@@ -625,9 +691,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -642,6 +710,7 @@
# CONFIG_SERIAL_PXA_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
@@ -649,37 +718,45 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -688,19 +765,39 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
CONFIG_W1=y
#
# 1-wire Bus Masters
#
+# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
+# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
@@ -709,32 +806,56 @@
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
CONFIG_BATTERY_DS2760=y
+# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -745,6 +866,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -752,8 +874,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -765,13 +887,21 @@
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
#
# Display device support
@@ -802,15 +932,8 @@
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -824,53 +947,185 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=m
+# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -899,6 +1154,9 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -908,17 +1166,26 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -927,19 +1194,18 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -965,15 +1231,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -997,9 +1261,13 @@
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1007,14 +1275,13 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1076,6 +1343,7 @@
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1083,15 +1351,18 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
@@ -1100,17 +1371,41 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1119,55 +1414,110 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index d81ea21..36cd62e 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index a6b47ea..f2d2dda 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -88,7 +88,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index d052c8f..984f7096 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -87,7 +87,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 9b6561d..90235bf 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,88 +1,174 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git3
-# Sat Jul 16 15:21:47 2005
+# Linux kernel version: 2.6.28-git6
+# Thu Jan 8 17:14:47 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_SHARK=y
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Processor Type
@@ -91,14 +177,20 @@
CONFIG_CPU_SA110=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
@@ -107,22 +199,40 @@
CONFIG_ISA_DMA=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
CONFIG_PCI_HOST_VIA82C505=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
@@ -135,6 +245,12 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -143,13 +259,16 @@
#
# At least one emulation must be selected
#
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -158,6 +277,75 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -166,36 +354,27 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
@@ -210,52 +389,78 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_IDE_ARM=y
-# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -275,17 +480,20 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
@@ -296,12 +504,18 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
@@ -314,20 +528,15 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
@@ -336,123 +545,57 @@
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -462,56 +605,69 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
+CONFIG_CS89x0_NOEEPROM=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -519,18 +675,17 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -540,7 +695,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -553,14 +707,25 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -580,16 +745,22 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -599,90 +770,122 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Misc devices
+# Sonics Silicon Backplane
#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -691,126 +894,132 @@
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-CONFIG_SOUND_ADLIB=m
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
-# USB Gadget Support
+# Enable Host or Gadget support to see Inventra options
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -834,14 +1043,12 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -855,22 +1062,27 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -897,11 +1109,9 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -942,30 +1152,74 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
@@ -973,19 +1227,23 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 03f783e..685d2b5 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -89,7 +89,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index df5638f..7edf353 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -19,21 +19,17 @@
#include <asm/system.h>
#include <asm/scatterlist.h>
-typedef unsigned int dmach_t;
-
#include <mach/isa-dma.h>
/*
- * DMA modes
+ * The DMA modes reflect the settings for the ISA DMA controller
*/
-typedef unsigned int dmamode_t;
+#define DMA_MODE_MASK 0xcc
-#define DMA_MODE_MASK 3
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT 4
+#define DMA_MODE_READ 0x44
+#define DMA_MODE_WRITE 0x48
+#define DMA_MODE_CASCADE 0xc0
+#define DMA_AUTOINIT 0x10
extern spinlock_t dma_spin_lock;
@@ -52,44 +48,44 @@
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
*/
-#define clear_dma_ff(channel)
+#define clear_dma_ff(chan)
/* Set only the page register bits of the transfer address.
*
* NOTE: This is an architecture specific function, and should
* be hidden from the drivers
*/
-extern void set_dma_page(dmach_t channel, char pagenr);
+extern void set_dma_page(unsigned int chan, char pagenr);
/* Request a DMA channel
*
* Some architectures may need to do allocate an interrupt
*/
-extern int request_dma(dmach_t channel, const char * device_id);
+extern int request_dma(unsigned int chan, const char * device_id);
/* Free a DMA channel
*
* Some architectures may need to do free an interrupt
*/
-extern void free_dma(dmach_t channel);
+extern void free_dma(unsigned int chan);
/* Enable DMA for this channel
*
* On some architectures, this may have other side effects like
* enabling an interrupt and setting the DMA registers.
*/
-extern void enable_dma(dmach_t channel);
+extern void enable_dma(unsigned int chan);
/* Disable DMA for this channel
*
* On some architectures, this may have other side effects like
* disabling an interrupt or whatever.
*/
-extern void disable_dma(dmach_t channel);
+extern void disable_dma(unsigned int chan);
/* Test whether the specified channel has an active DMA transfer
*/
-extern int dma_channel_active(dmach_t channel);
+extern int dma_channel_active(unsigned int chan);
/* Set the DMA scatter gather list for this channel
*
@@ -97,7 +93,7 @@
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
/* Set the DMA address for this channel
*
@@ -105,9 +101,9 @@
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr) \
- __set_dma_addr(channel, bus_to_virt(addr))
+extern void __set_dma_addr(unsigned int chan, void *addr);
+#define set_dma_addr(chan, addr) \
+ __set_dma_addr(chan, bus_to_virt(addr))
/* Set the DMA byte count for this channel
*
@@ -115,7 +111,7 @@
* especially since some DMA architectures don't update the
* DMA count immediately, but defer it to the enable_dma().
*/
-extern void set_dma_count(dmach_t channel, unsigned long count);
+extern void set_dma_count(unsigned int chan, unsigned long count);
/* Set the transfer direction for this channel
*
@@ -124,11 +120,11 @@
* DMA transfer direction immediately, but defer it to the
* enable_dma().
*/
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, unsigned int mode);
/* Set the transfer speed for this channel
*/
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
+extern void set_dma_speed(unsigned int chan, int cycle_ns);
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
@@ -136,7 +132,7 @@
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*/
-extern int get_dma_residue(dmach_t channel);
+extern int get_dma_residue(unsigned int chan);
#ifndef NO_DMA
#define NO_DMA 255
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a58378c..def8eac 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
+#define R_ARM_PREL31 42
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index bda489f..f7bd52b 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -17,6 +17,8 @@
#define HWCAP_CRUNCH 1024
#define HWCAP_THUMBEE 2048
#define HWCAP_NEON 4096
+#define HWCAP_VFPv3 8192
+#define HWCAP_VFPv3D16 16384
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
/*
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index fc7278e..9e614a1 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -15,13 +15,13 @@
typedef struct dma_struct dma_t;
struct dma_ops {
- int (*request)(dmach_t, dma_t *); /* optional */
- void (*free)(dmach_t, dma_t *); /* optional */
- void (*enable)(dmach_t, dma_t *); /* mandatory */
- void (*disable)(dmach_t, dma_t *); /* mandatory */
- int (*residue)(dmach_t, dma_t *); /* optional */
- int (*setspeed)(dmach_t, dma_t *, int); /* optional */
- char *type;
+ int (*request)(unsigned int, dma_t *); /* optional */
+ void (*free)(unsigned int, dma_t *); /* optional */
+ void (*enable)(unsigned int, dma_t *); /* mandatory */
+ void (*disable)(unsigned int, dma_t *); /* mandatory */
+ int (*residue)(unsigned int, dma_t *); /* optional */
+ int (*setspeed)(unsigned int, dma_t *, int); /* optional */
+ const char *type;
};
struct dma_struct {
@@ -34,24 +34,21 @@
unsigned int active:1; /* Transfer active */
unsigned int invalid:1; /* Address/Count changed */
- dmamode_t dma_mode; /* DMA mode */
+ unsigned int dma_mode; /* DMA mode */
int speed; /* DMA speed */
unsigned int lock; /* Device is allocated */
const char *device_id; /* Device name */
- unsigned int dma_base; /* Controller base address */
- int dma_irq; /* Controller IRQ */
- struct scatterlist cur_sg; /* Current controller buffer */
- unsigned int state;
-
- struct dma_ops *d_ops;
+ const struct dma_ops *d_ops;
};
-/* Prototype: void arch_dma_init(dma)
- * Purpose : Initialise architecture specific DMA
- * Params : dma - pointer to array of DMA structures
+/*
+ * isa_dma_add - add an ISA-style DMA channel
*/
-extern void arch_dma_init(dma_t *dma);
+extern int isa_dma_add(unsigned int, dma_t *dma);
-extern void isa_init_dma(dma_t *dma);
+/*
+ * Add the ISA DMA controller. Always takes channels 0-7.
+ */
+extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 39d949b..58cf91f 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -26,6 +26,7 @@
#define MT_HIGH_VECTORS 8
#define MT_MEMORY 9
#define MT_ROM 10
+#define MT_MEMORY_NONCACHED 11
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 24b168d..e4dfa69 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -1,15 +1,27 @@
#ifndef _ASM_ARM_MODULE_H
#define _ASM_ARM_MODULE_H
-struct mod_arch_specific
-{
- int foo;
-};
-
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
+struct unwind_table;
+
+struct mod_arch_specific
+{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *unw_sec_init;
+ Elf_Shdr *unw_sec_devinit;
+ Elf_Shdr *unw_sec_core;
+ Elf_Shdr *sec_init_text;
+ Elf_Shdr *sec_devinit_text;
+ Elf_Shdr *sec_core_text;
+ struct unwind_table *unwind_init;
+ struct unwind_table *unwind_devinit;
+ struct unwind_table *unwind_core;
+#endif
+};
+
/*
* Include the ARM architecture version.
*/
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 7319261..236a06b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -27,6 +27,8 @@
/* PTRACE_SYSCALL is 24 */
#define PTRACE_GETCRUNCHREGS 25
#define PTRACE_SETCRUNCHREGS 26
+#define PTRACE_GETVFPREGS 27
+#define PTRACE_SETVFPREGS 28
/*
* PSR bits
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
new file mode 100644
index 0000000..4d0a164
--- /dev/null
+++ b/arch/arm/include/asm/stacktrace.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+ unsigned long fp;
+ unsigned long sp;
+ unsigned long lr;
+ unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data);
+
+#endif /* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 68b9ec8..4f88482 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -99,6 +99,8 @@
#define thread_saved_pc(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
@@ -113,6 +115,8 @@
extern void iwmmxt_task_release(struct thread_info *);
extern void iwmmxt_task_switch(struct thread_info *);
+extern void vfp_sync_state(struct thread_info *thread);
+
#endif
/*
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index aa399ae..491960b 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -25,5 +25,6 @@
}
extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
#endif
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
new file mode 100644
index 0000000..a5edf42
--- /dev/null
+++ b/arch/arm/include/asm/unwind.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/include/asm/unwind.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNWIND_H
+#define __ASM_UNWIND_H
+
+#ifndef __ASSEMBLY__
+
+/* Unwind reason code according the the ARM EABI documents */
+enum unwind_reason_code {
+ URC_OK = 0, /* operation completed successfully */
+ URC_CONTINUE_UNWIND = 8,
+ URC_FAILURE = 9 /* unspecified failure of some kind */
+};
+
+struct unwind_idx {
+ unsigned long addr;
+ unsigned long insn;
+};
+
+struct unwind_table {
+ struct list_head list;
+ struct unwind_idx *start;
+ struct unwind_idx *stop;
+ unsigned long begin_addr;
+ unsigned long end_addr;
+};
+
+extern struct unwind_table *unwind_table_add(unsigned long start,
+ unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size);
+extern void unwind_table_del(struct unwind_table *tab);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+
+#ifdef CONFIG_ARM_UNWIND
+extern int __init unwind_init(void);
+#else
+static inline int __init unwind_init(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARM_UNWIND
+#define UNWIND(code...) code
+#else
+#define UNWIND(code...)
+#endif
+
+#endif /* __ASM_UNWIND_H */
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index 825c1e7..df95e05 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -81,4 +81,13 @@
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+/*
+ * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
+ * are ignored by the ptrace system call.
+ */
+struct user_vfp {
+ unsigned long long fpregs[32];
+ unsigned long fpscr;
+};
+
#endif /* _ARM_USER_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 4305345..ca60d33 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f53c582..b121b60 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,33 @@
1002:
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
#else
.macro addruart, rx
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 4a3a504..0e88e46 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -24,11 +24,6 @@
#include <asm/dma.h>
#include <asm/mach/dma.h>
-#define ISA_DMA_MODE_READ 0x44
-#define ISA_DMA_MODE_WRITE 0x48
-#define ISA_DMA_MODE_CASCADE 0xc0
-#define ISA_DMA_AUTOINIT 0x10
-
#define ISA_DMA_MASK 0
#define ISA_DMA_MODE 1
#define ISA_DMA_CLRFF 2
@@ -49,38 +44,35 @@
{ 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce }
};
-static int isa_get_dma_residue(dmach_t channel, dma_t *dma)
+static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
{
- unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT];
+ unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
int count;
count = 1 + inb(io_port);
count |= inb(io_port) << 8;
- return channel < 4 ? count : (count << 1);
+ return chan < 4 ? count : (count << 1);
}
-static void isa_enable_dma(dmach_t channel, dma_t *dma)
+static void isa_enable_dma(unsigned int chan, dma_t *dma)
{
if (dma->invalid) {
unsigned long address, length;
unsigned int mode;
enum dma_data_direction direction;
- mode = channel & 3;
+ mode = (chan & 3) | dma->dma_mode;
switch (dma->dma_mode & DMA_MODE_MASK) {
case DMA_MODE_READ:
- mode |= ISA_DMA_MODE_READ;
direction = DMA_FROM_DEVICE;
break;
case DMA_MODE_WRITE:
- mode |= ISA_DMA_MODE_WRITE;
direction = DMA_TO_DEVICE;
break;
case DMA_MODE_CASCADE:
- mode |= ISA_DMA_MODE_CASCADE;
direction = DMA_BIDIRECTIONAL;
break;
@@ -105,34 +97,31 @@
address = dma->buf.dma_address;
length = dma->buf.length - 1;
- outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]);
- outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]);
+ outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
+ outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
- if (channel >= 4) {
+ if (chan >= 4) {
address >>= 1;
length >>= 1;
}
- outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]);
+ outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
- outb(address, isa_dma_port[channel][ISA_DMA_ADDR]);
- outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]);
+ outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
+ outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
- outb(length, isa_dma_port[channel][ISA_DMA_COUNT]);
- outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]);
+ outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
+ outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
- if (dma->dma_mode & DMA_AUTOINIT)
- mode |= ISA_DMA_AUTOINIT;
-
- outb(mode, isa_dma_port[channel][ISA_DMA_MODE]);
+ outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
dma->invalid = 0;
}
- outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
}
-static void isa_disable_dma(dmach_t channel, dma_t *dma)
+static void isa_disable_dma(unsigned int chan, dma_t *dma)
{
- outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
}
static struct dma_ops isa_dma_ops = {
@@ -160,7 +149,12 @@
.end = 0x048f
} };
-void __init isa_init_dma(dma_t *dma)
+static dma_t isa_dma[8];
+
+/*
+ * ISA DMA always starts at channel 0
+ */
+void __init isa_init_dma(void)
{
/*
* Try to autodetect presence of an ISA DMA controller.
@@ -178,11 +172,11 @@
outb(0xaa, 0x00);
if (inb(0) == 0x55 && inb(0) == 0xaa) {
- int channel, i;
+ unsigned int chan, i;
- for (channel = 0; channel < 8; channel++) {
- dma[channel].d_ops = &isa_dma_ops;
- isa_disable_dma(channel, NULL);
+ for (chan = 0; chan < 8; chan++) {
+ isa_dma[chan].d_ops = &isa_dma_ops;
+ isa_disable_dma(chan, NULL);
}
outb(0x40, 0x0b);
@@ -217,5 +211,12 @@
for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
+
+ for (chan = 0; chan < 8; chan++) {
+ int ret = isa_dma_add(chan, &isa_dma[chan]);
+ if (ret)
+ printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
+ chan, ret);
+ }
}
}
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index d006085..7d5b9fb 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
+#include <linux/scatterlist.h>
#include <asm/dma.h>
@@ -23,19 +24,40 @@
DEFINE_SPINLOCK(dma_spin_lock);
EXPORT_SYMBOL(dma_spin_lock);
-static dma_t dma_chan[MAX_DMA_CHANNELS];
+static dma_t *dma_chan[MAX_DMA_CHANNELS];
+
+static inline dma_t *dma_channel(unsigned int chan)
+{
+ if (chan >= MAX_DMA_CHANNELS)
+ return NULL;
+
+ return dma_chan[chan];
+}
+
+int __init isa_dma_add(unsigned int chan, dma_t *dma)
+{
+ if (!dma->d_ops)
+ return -EINVAL;
+
+ sg_init_table(&dma->buf, 1);
+
+ if (dma_chan[chan])
+ return -EBUSY;
+ dma_chan[chan] = dma;
+ return 0;
+}
/*
* Request DMA channel
*
* On certain platforms, we have to allocate an interrupt as well...
*/
-int request_dma(dmach_t channel, const char *device_id)
+int request_dma(unsigned int chan, const char *device_id)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret;
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (xchg(&dma->lock, 1) != 0)
@@ -47,7 +69,7 @@
ret = 0;
if (dma->d_ops->request)
- ret = dma->d_ops->request(channel, dma);
+ ret = dma->d_ops->request(chan, dma);
if (ret)
xchg(&dma->lock, 0);
@@ -55,7 +77,7 @@
return ret;
bad_dma:
- printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
return -EINVAL;
busy:
@@ -68,42 +90,42 @@
*
* On certain platforms, we have to free interrupt as well...
*/
-void free_dma(dmach_t channel)
+void free_dma(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (dma->active) {
- printk(KERN_ERR "dma%d: freeing active DMA\n", channel);
- dma->d_ops->disable(channel, dma);
+ printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
+ dma->d_ops->disable(chan, dma);
dma->active = 0;
}
if (xchg(&dma->lock, 0) != 0) {
if (dma->d_ops->free)
- dma->d_ops->free(channel, dma);
+ dma->d_ops->free(chan, dma);
return;
}
- printk(KERN_ERR "dma%d: trying to free free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
return;
bad_dma:
- printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
}
EXPORT_SYMBOL(free_dma);
/* Set DMA Scatter-Gather list
*/
-void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
+void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA SG while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = sg;
dma->sgcount = nr_sg;
@@ -115,13 +137,13 @@
*
* Copy address to the structure, and set the invalid bit
*/
-void __set_dma_addr (dmach_t channel, void *addr)
+void __set_dma_addr (unsigned int chan, void *addr)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA address while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->addr = addr;
@@ -133,13 +155,13 @@
*
* Copy address to the structure, and set the invalid bit
*/
-void set_dma_count (dmach_t channel, unsigned long count)
+void set_dma_count (unsigned int chan, unsigned long count)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA count while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->count = count;
@@ -149,13 +171,13 @@
/* Set DMA direction mode
*/
-void set_dma_mode (dmach_t channel, dmamode_t mode)
+void set_dma_mode (unsigned int chan, unsigned int mode)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA mode while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->dma_mode = mode;
dma->invalid = 1;
@@ -164,42 +186,42 @@
/* Enable DMA channel
*/
-void enable_dma (dmach_t channel)
+void enable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 0) {
dma->active = 1;
- dma->d_ops->enable(channel, dma);
+ dma->d_ops->enable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(enable_dma);
/* Disable DMA channel
*/
-void disable_dma (dmach_t channel)
+void disable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 1) {
dma->active = 0;
- dma->d_ops->disable(channel, dma);
+ dma->d_ops->disable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(disable_dma);
@@ -207,45 +229,38 @@
/*
* Is the specified DMA channel active?
*/
-int dma_channel_active(dmach_t channel)
+int dma_channel_active(unsigned int chan)
{
- return dma_chan[channel].active;
+ dma_t *dma = dma_channel(chan);
+ return dma->active;
}
EXPORT_SYMBOL(dma_channel_active);
-void set_dma_page(dmach_t channel, char pagenr)
+void set_dma_page(unsigned int chan, char pagenr)
{
- printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
+ printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
}
EXPORT_SYMBOL(set_dma_page);
-void set_dma_speed(dmach_t channel, int cycle_ns)
+void set_dma_speed(unsigned int chan, int cycle_ns)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->setspeed)
- ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
+ ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
dma->speed = ret;
}
EXPORT_SYMBOL(set_dma_speed);
-int get_dma_residue(dmach_t channel)
+int get_dma_residue(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->residue)
- ret = dma->d_ops->residue(channel, dma);
+ ret = dma->d_ops->residue(chan, dma);
return ret;
}
EXPORT_SYMBOL(get_dma_residue);
-
-static int __init init_dma(void)
-{
- arch_dma_init(dma_chan);
- return 0;
-}
-
-core_initcall(init_dma);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 85040cf..d662a2f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -20,6 +20,7 @@
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
+#include <asm/unwind.h>
#include "entry-header.S"
@@ -123,6 +124,8 @@
#endif
.macro svc_entry, stack_hole=0
+ UNWIND(.fnstart )
+ UNWIND(.save {r0 - pc} )
sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
@@ -196,6 +199,7 @@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__dabt_svc)
.align 5
@@ -228,6 +232,7 @@
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__irq_svc)
.ltorg
@@ -278,6 +283,7 @@
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ UNWIND(.fnend )
ENDPROC(__und_svc)
.align 5
@@ -320,6 +326,7 @@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__pabt_svc)
.align 5
@@ -343,6 +350,8 @@
#endif
.macro usr_entry
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
stmib sp, {r1 - r12}
@@ -420,6 +429,7 @@
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
+ UNWIND(.fnend )
ENDPROC(__dabt_usr)
.align 5
@@ -450,6 +460,7 @@
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__irq_usr)
.ltorg
@@ -484,6 +495,7 @@
#else
b __und_usr_unknown
#endif
+ UNWIND(.fnend )
ENDPROC(__und_usr)
@
@@ -671,14 +683,18 @@
enable_irq @ Enable interrupts
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
+ UNWIND(.fnend )
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
get_thread_info tsk
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__pabt_usr)
ENDPROC(ret_from_exception)
@@ -688,6 +704,8 @@
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
@@ -717,6 +735,7 @@
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ UNWIND(.fnend )
ENDPROC(__switch_to)
__INIT
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 49a6ba9..b8c1f14 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -11,6 +11,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
+#include <asm/unwind.h>
#include "entry-header.S"
@@ -22,6 +23,8 @@
* stack.
*/
ret_fast_syscall:
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
@@ -38,6 +41,7 @@
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
+ UNWIND(.fnend )
/*
* Ok, we need to do extra processing, enter the slow path.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index dab48f2..13dbd5b 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
+#include <asm/unwind.h>
#ifdef CONFIG_XIP_KERNEL
/*
@@ -66,6 +67,24 @@
char *secstrings,
struct module *mod)
{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+
+ for (s = sechdrs; s < sechdrs_end; s++) {
+ if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_init = s;
+ else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_devinit = s;
+ else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_core = s;
+ else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_init_text = s;
+ else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_devinit_text = s;
+ else if (strcmp(".text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_core_text = s;
+ }
+#endif
return 0;
}
@@ -104,6 +123,10 @@
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {
+ case R_ARM_NONE:
+ /* ignore */
+ break;
+
case R_ARM_ABS32:
*(u32 *)loc += sym->st_value;
break;
@@ -132,6 +155,11 @@
*(u32 *)loc |= offset & 0x00ffffff;
break;
+ case R_ARM_PREL31:
+ offset = *(u32 *)loc + sym->st_value - loc;
+ *(u32 *)loc = offset & 0x7fffffff;
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
@@ -150,14 +178,50 @@
return -ENOEXEC;
}
+#ifdef CONFIG_ARM_UNWIND
+static void register_unwind_tables(struct module *mod)
+{
+ if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
+ mod->arch.unwind_init =
+ unwind_table_add(mod->arch.unw_sec_init->sh_addr,
+ mod->arch.unw_sec_init->sh_size,
+ mod->arch.sec_init_text->sh_addr,
+ mod->arch.sec_init_text->sh_size);
+ if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
+ mod->arch.unwind_devinit =
+ unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
+ mod->arch.unw_sec_devinit->sh_size,
+ mod->arch.sec_devinit_text->sh_addr,
+ mod->arch.sec_devinit_text->sh_size);
+ if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
+ mod->arch.unwind_core =
+ unwind_table_add(mod->arch.unw_sec_core->sh_addr,
+ mod->arch.unw_sec_core->sh_size,
+ mod->arch.sec_core_text->sh_addr,
+ mod->arch.sec_core_text->sh_size);
+}
+
+static void unregister_unwind_tables(struct module *mod)
+{
+ unwind_table_del(mod->arch.unwind_init);
+ unwind_table_del(mod->arch.unwind_devinit);
+ unwind_table_del(mod->arch.unwind_core);
+}
+#else
+static inline void register_unwind_tables(struct module *mod) { }
+static inline void unregister_unwind_tables(struct module *mod) { }
+#endif
+
int
module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *module)
{
+ register_unwind_tables(module);
return 0;
}
void
module_arch_cleanup(struct module *mod)
{
+ unregister_unwind_tables(mod);
}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ea6fa..af377c7 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -34,6 +34,7 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
static const char *processor_modes[] = {
@@ -372,23 +373,21 @@
unsigned long get_wchan(struct task_struct *p)
{
- unsigned long fp, lr;
- unsigned long stack_start, stack_end;
+ struct stackframe frame;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
- stack_start = (unsigned long)end_of_stack(p);
- stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
- fp = thread_saved_fp(p);
+ frame.fp = thread_saved_fp(p);
+ frame.sp = thread_saved_sp(p);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(p);
do {
- if (fp < stack_start || fp > stack_end)
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
return 0;
- lr = ((unsigned long *)fp)[-1];
- if (!in_sched_functions(lr))
- return lr;
- fp = *(unsigned long *) (fp - 12);
+ if (!in_sched_functions(frame.pc))
+ return frame.pc;
} while (count ++ < 16);
return 0;
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index df653ea..89882a1 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -653,6 +653,54 @@
}
#endif
+#ifdef CONFIG_VFP
+/*
+ * Get the child VFP state.
+ */
+static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (put_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Set the child VFP state.
+ */
+static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (get_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+#endif
+
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
@@ -775,6 +823,16 @@
break;
#endif
+#ifdef CONFIG_VFP
+ case PTRACE_GETVFPREGS:
+ ret = ptrace_getvfpregs(child, (void __user *)data);
+ break;
+
+ case PTRACE_SETVFPREGS:
+ ret = ptrace_setvfpregs(child, (void __user *)data);
+ break;
+#endif
+
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 68d6494..bc5e412 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -40,6 +40,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "compat.h"
#include "atags.h"
@@ -685,6 +686,8 @@
struct machine_desc *mdesc;
char *from = default_command_line;
+ unwind_init();
+
setup_processor();
mdesc = setup_machine(machine_arch_type);
machine_name = mdesc->name;
@@ -780,6 +783,8 @@
"crunch",
"thumbee",
"neon",
+ "vfpv3",
+ "vfpv3d16",
NULL
};
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 55fa7ff..7801aac 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -93,6 +93,7 @@
pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+ flush_pmd_entry(pmd);
/*
* We need to tell the secondary core where to find
@@ -130,6 +131,7 @@
secondary_data.pgdir = 0;
*pmd = __pmd(0);
+ clean_pmd_entry(pmd);
pgd_free(&init_mm, pgd);
if (ret) {
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index fc650f6..9f444e5 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -2,34 +2,59 @@
#include <linux/sched.h>
#include <linux/stacktrace.h>
-#include "stacktrace.h"
+#include <asm/stacktrace.h>
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data)
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ * mov ip, sp
+ * stmdb sp!, {fp, ip, lr, pc}
+ * sub fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ * ldm sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int unwind_frame(struct stackframe *frame)
{
- struct stackframe *frame;
+ unsigned long high, low;
+ unsigned long fp = frame->fp;
- do {
- /*
- * Check current frame pointer is within bounds
- */
- if (fp < (low + 12) || fp + 4 >= high)
- break;
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
- frame = (struct stackframe *)(fp - 12);
+ /* check current frame pointer is within bounds */
+ if (fp < (low + 12) || fp + 4 >= high)
+ return -EINVAL;
+
+ /* restore the registers from the stack frame */
+ frame->fp = *(unsigned long *)(fp - 12);
+ frame->sp = *(unsigned long *)(fp - 8);
+ frame->pc = *(unsigned long *)(fp - 4);
+
+ return 0;
+}
+#endif
+
+void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data)
+{
+ while (1) {
+ int ret;
if (fn(frame, data))
break;
-
- /*
- * Update the low bound - the next frame must always
- * be at a higher address than the current frame.
- */
- low = fp + 4;
- fp = frame->fp;
- } while (fp);
-
- return 0;
+ ret = unwind_frame(frame);
+ if (ret < 0)
+ break;
+ }
}
EXPORT_SYMBOL(walk_stackframe);
@@ -44,7 +69,7 @@
{
struct stack_trace_data *data = d;
struct stack_trace *trace = data->trace;
- unsigned long addr = frame->lr;
+ unsigned long addr = frame->pc;
if (data->no_sched_functions && in_sched_functions(addr))
return 0;
@@ -61,11 +86,10 @@
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
struct stack_trace_data data;
- unsigned long fp, base;
+ struct stackframe frame;
data.trace = trace;
data.skip = trace->skip;
- base = (unsigned long)task_stack_page(tsk);
if (tsk != current) {
#ifdef CONFIG_SMP
@@ -76,14 +100,22 @@
BUG();
#else
data.no_sched_functions = 1;
- fp = thread_saved_fp(tsk);
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(tsk);
#endif
} else {
+ register unsigned long current_sp asm ("sp");
+
data.no_sched_functions = 0;
- asm("mov %0, fp" : "=r" (fp));
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)save_stack_trace_tsk;
}
- walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+ walk_stackframe(&frame, save_trace, &data);
if (trace->nr_entries < trace->max_entries)
trace->entries[trace->nr_entries++] = ULONG_MAX;
}
diff --git a/arch/arm/kernel/stacktrace.h b/arch/arm/kernel/stacktrace.h
deleted file mode 100644
index e9fd20c..0000000
--- a/arch/arm/kernel/stacktrace.h
+++ /dev/null
@@ -1,9 +0,0 @@
-struct stackframe {
- unsigned long fp;
- unsigned long sp;
- unsigned long lr;
- unsigned long pc;
-};
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index c68b44a..4cdc4a0 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -33,6 +33,7 @@
#include <asm/leds.h>
#include <asm/thread_info.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
/*
@@ -55,14 +56,22 @@
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
- unsigned long fp, pc = instruction_pointer(regs);
+ struct stackframe frame;
- if (in_lock_functions(pc)) {
- fp = regs->ARM_fp;
- pc = ((unsigned long *)fp)[-1];
- }
+ if (!in_lock_functions(regs->ARM_pc))
+ return regs->ARM_pc;
- return pc;
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ do {
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
+ return 0;
+ } while (in_lock_functions(frame.pc));
+
+ return frame.pc;
}
EXPORT_SYMBOL(profile_pc);
#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 79abc4d..57eb0f6 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "ptrace.h"
#include "signal.h"
@@ -61,6 +62,7 @@
dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
+#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of
* physical memory. If it is not there, then we can't dump
@@ -74,6 +76,7 @@
return 0;
}
+#endif
/*
* Dump out the contents of some memory nicely...
@@ -150,13 +153,33 @@
set_fs(fs);
}
+#ifdef CONFIG_ARM_UNWIND
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ unwind_backtrace(regs, tsk);
+}
+#else
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
- unsigned int fp;
+ unsigned int fp, mode;
int ok = 1;
printk("Backtrace: ");
- fp = regs->ARM_fp;
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ fp = regs->ARM_fp;
+ mode = processor_mode(regs);
+ } else if (tsk != current) {
+ fp = thread_saved_fp(tsk);
+ mode = 0x10;
+ } else {
+ asm("mov %0, fp" : "=r" (fp) : : "cc");
+ mode = 0x10;
+ }
+
if (!fp) {
printk("no frame pointer");
ok = 0;
@@ -168,29 +191,20 @@
printk("\n");
if (ok)
- c_backtrace(fp, processor_mode(regs));
+ c_backtrace(fp, mode);
}
+#endif
void dump_stack(void)
{
- __backtrace();
+ dump_backtrace(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
void show_stack(struct task_struct *tsk, unsigned long *sp)
{
- unsigned long fp;
-
- if (!tsk)
- tsk = current;
-
- if (tsk != current)
- fp = thread_saved_fp(tsk);
- else
- asm("mov %0, fp" : "=r" (fp) : : "cc");
-
- c_backtrace(fp, 0x10);
+ dump_backtrace(NULL, tsk);
barrier();
}
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
new file mode 100644
index 0000000..1dedc2c
--- /dev/null
+++ b/arch/arm/kernel/unwind.c
@@ -0,0 +1,434 @@
+/*
+ * arch/arm/kernel/unwind.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Stack unwinding support for ARM
+ *
+ * An ARM EABI version of gcc is required to generate the unwind
+ * tables. For information about the structure of the unwind tables,
+ * see "Exception Handling ABI for the ARM Architecture" at:
+ *
+ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+#include <asm/unwind.h>
+
+/* Dummy functions to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
+
+struct unwind_ctrl_block {
+ unsigned long vrs[16]; /* virtual register set */
+ unsigned long *insn; /* pointer to the current instructions word */
+ int entries; /* number of entries left to interpret */
+ int byte; /* current byte number in the instructions word */
+};
+
+enum regs {
+ FP = 11,
+ SP = 13,
+ LR = 14,
+ PC = 15
+};
+
+extern struct unwind_idx __start_unwind_idx[];
+extern struct unwind_idx __stop_unwind_idx[];
+
+static DEFINE_SPINLOCK(unwind_lock);
+static LIST_HEAD(unwind_tables);
+
+/* Convert a prel31 symbol to an absolute address */
+#define prel31_to_addr(ptr) \
+({ \
+ /* sign-extend to 32 bits */ \
+ long offset = (((long)*(ptr)) << 1) >> 1; \
+ (unsigned long)(ptr) + offset; \
+})
+
+/*
+ * Binary search in the unwind index. The entries entries are
+ * guaranteed to be sorted in ascending order by the linker.
+ */
+static struct unwind_idx *search_index(unsigned long addr,
+ struct unwind_idx *first,
+ struct unwind_idx *last)
+{
+ pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+
+ if (addr < first->addr) {
+ pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+ return NULL;
+ } else if (addr >= last->addr)
+ return last;
+
+ while (first < last - 1) {
+ struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+
+ if (addr < mid->addr)
+ last = mid;
+ else
+ first = mid;
+ }
+
+ return first;
+}
+
+static struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+ struct unwind_idx *idx = NULL;
+ unsigned long flags;
+
+ pr_debug("%s(%08lx)\n", __func__, addr);
+
+ if (core_kernel_text(addr))
+ /* main unwind table */
+ idx = search_index(addr, __start_unwind_idx,
+ __stop_unwind_idx - 1);
+ else {
+ /* module unwind tables */
+ struct unwind_table *table;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_for_each_entry(table, &unwind_tables, list) {
+ if (addr >= table->begin_addr &&
+ addr < table->end_addr) {
+ idx = search_index(addr, table->start,
+ table->stop - 1);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&unwind_lock, flags);
+ }
+
+ pr_debug("%s: idx = %p\n", __func__, idx);
+ return idx;
+}
+
+static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long ret;
+
+ if (ctrl->entries <= 0) {
+ pr_warning("unwind: Corrupt unwind table\n");
+ return 0;
+ }
+
+ ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
+
+ if (ctrl->byte == 0) {
+ ctrl->insn++;
+ ctrl->entries--;
+ ctrl->byte = 3;
+ } else
+ ctrl->byte--;
+
+ return ret;
+}
+
+/*
+ * Execute the current unwind instruction.
+ */
+static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long insn = unwind_get_byte(ctrl);
+
+ pr_debug("%s: insn = %08lx\n", __func__, insn);
+
+ if ((insn & 0xc0) == 0x00)
+ ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xc0) == 0x40)
+ ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xf0) == 0x80) {
+ unsigned long mask;
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int load_sp, reg = 4;
+
+ insn = (insn << 8) | unwind_get_byte(ctrl);
+ mask = insn & 0x0fff;
+ if (mask == 0) {
+ pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
+ insn);
+ return -URC_FAILURE;
+ }
+
+ /* pop R4-R15 according to mask */
+ load_sp = mask & (1 << (13 - 4));
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ if (!load_sp)
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if ((insn & 0xf0) == 0x90 &&
+ (insn & 0x0d) != 0x0d)
+ ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
+ else if ((insn & 0xf0) == 0xa0) {
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg;
+
+ /* pop R4-R[4+bbb] */
+ for (reg = 4; reg <= 4 + (insn & 7); reg++)
+ ctrl->vrs[reg] = *vsp++;
+ if (insn & 0x80)
+ ctrl->vrs[14] = *vsp++;
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb0) {
+ ctrl->vrs[PC] = ctrl->vrs[LR];
+ /* no further processing */
+ ctrl->entries = 0;
+ } else if (insn == 0xb1) {
+ unsigned long mask = unwind_get_byte(ctrl);
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg = 0;
+
+ if (mask == 0 || mask & 0xf0) {
+ pr_warning("unwind: Spare encoding %04lx\n",
+ (insn << 8) | mask);
+ return -URC_FAILURE;
+ }
+
+ /* pop R0-R3 according to mask */
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb2) {
+ unsigned long uleb128 = unwind_get_byte(ctrl);
+
+ ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
+ } else {
+ pr_warning("unwind: Unhandled instruction %02lx\n", insn);
+ return -URC_FAILURE;
+ }
+
+ pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
+ ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
+
+ return URC_OK;
+}
+
+/*
+ * Unwind a single frame starting with *sp for the symbol at *pc. It
+ * updates the *pc and *sp with the new values.
+ */
+int unwind_frame(struct stackframe *frame)
+{
+ unsigned long high, low;
+ struct unwind_idx *idx;
+ struct unwind_ctrl_block ctrl;
+
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+
+ pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
+ frame->pc, frame->lr, frame->sp);
+
+ if (!kernel_text_address(frame->pc))
+ return -URC_FAILURE;
+
+ idx = unwind_find_idx(frame->pc);
+ if (!idx) {
+ pr_warning("unwind: Index not found %08lx\n", frame->pc);
+ return -URC_FAILURE;
+ }
+
+ ctrl.vrs[FP] = frame->fp;
+ ctrl.vrs[SP] = frame->sp;
+ ctrl.vrs[LR] = frame->lr;
+ ctrl.vrs[PC] = 0;
+
+ if (idx->insn == 1)
+ /* can't unwind */
+ return -URC_FAILURE;
+ else if ((idx->insn & 0x80000000) == 0)
+ /* prel31 to the unwind table */
+ ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
+ else if ((idx->insn & 0xff000000) == 0x80000000)
+ /* only personality routine 0 supported in the index */
+ ctrl.insn = &idx->insn;
+ else {
+ pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
+ idx->insn, idx);
+ return -URC_FAILURE;
+ }
+
+ /* check the personality routine */
+ if ((*ctrl.insn & 0xff000000) == 0x80000000) {
+ ctrl.byte = 2;
+ ctrl.entries = 1;
+ } else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
+ ctrl.byte = 1;
+ ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
+ } else {
+ pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
+ *ctrl.insn, ctrl.insn);
+ return -URC_FAILURE;
+ }
+
+ while (ctrl.entries > 0) {
+ int urc;
+
+ if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+ return -URC_FAILURE;
+ urc = unwind_exec_insn(&ctrl);
+ if (urc < 0)
+ return urc;
+ }
+
+ if (ctrl.vrs[PC] == 0)
+ ctrl.vrs[PC] = ctrl.vrs[LR];
+
+ frame->fp = ctrl.vrs[FP];
+ frame->sp = ctrl.vrs[SP];
+ frame->lr = ctrl.vrs[LR];
+ frame->pc = ctrl.vrs[PC];
+
+ return URC_OK;
+}
+
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ struct stackframe frame;
+ unsigned long high, low;
+ register unsigned long current_sp asm ("sp");
+
+ pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ } else if (tsk == current) {
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)unwind_backtrace;
+ } else {
+ /* task blocked in __switch_to */
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ /*
+ * The function calling __switch_to cannot be a leaf function
+ * so LR is recovered from the stack.
+ */
+ frame.lr = 0;
+ frame.pc = thread_saved_pc(tsk);
+ }
+
+ low = frame.sp & ~(THREAD_SIZE - 1);
+ high = low + THREAD_SIZE;
+
+ while (1) {
+ int urc;
+ unsigned long where = frame.pc;
+
+ urc = unwind_frame(&frame);
+ if (urc < 0)
+ break;
+ dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+ }
+}
+
+struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size)
+{
+ unsigned long flags;
+ struct unwind_idx *idx;
+ struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
+
+ pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
+ text_addr, text_size);
+
+ if (!tab)
+ return tab;
+
+ tab->start = (struct unwind_idx *)start;
+ tab->stop = (struct unwind_idx *)(start + size);
+ tab->begin_addr = text_addr;
+ tab->end_addr = text_addr + text_size;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = tab->start; idx < tab->stop; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_add_tail(&tab->list, &unwind_tables);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ return tab;
+}
+
+void unwind_table_del(struct unwind_table *tab)
+{
+ unsigned long flags;
+
+ if (!tab)
+ return;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_del(&tab->list);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ kfree(tab);
+}
+
+int __init unwind_init(void)
+{
+ struct unwind_idx *idx;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ pr_debug("unwind: ARM stack unwinding initialised\n");
+
+ return 0;
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 0021607..5f66459 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,8 @@
EXIT_TEXT
EXIT_DATA
*(.exitcall.exit)
+ *(.ARM.exidx.exit.text)
+ *(.ARM.extab.exit.text)
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
@@ -110,6 +112,23 @@
_etext = .; /* End of text and rodata section */
+#ifdef CONFIG_ARM_UNWIND
+ /*
+ * Stack unwinding tables
+ */
+ . = ALIGN(8);
+ .ARM.unwind_idx : {
+ __start_unwind_idx = .;
+ *(.ARM.exidx*)
+ __stop_unwind_idx = .;
+ }
+ .ARM.unwind_tab : {
+ __start_unwind_tab = .;
+ *(.ARM.extab*)
+ __stop_unwind_tab = .;
+ }
+#endif
+
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 81439fe..438efbb 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -238,6 +238,10 @@
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* PCK0 provides MCLK to the WM8731 */
+ at91_set_B_periph(AT91_PIN_PC1, 0);
+ /* SSC (for WM8731) */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7b9ce7a..b5daf7f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -47,9 +47,6 @@
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
- unsigned chipbase; /* bank's first GPIO number */
- void __iomem *regbase; /* base of register bank */
- struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 2f7d497..f2236f0 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -24,19 +24,59 @@
#include <mach/at91_pio.h>
#include <mach/gpio.h>
+#include <asm/gpio.h>
+
#include "generic.h"
+struct at91_gpio_chip {
+ struct gpio_chip chip;
+ struct at91_gpio_chip *next; /* Bank sharing same clock */
+ struct at91_gpio_bank *bank; /* Bank definition */
+ void __iomem *regbase; /* Base of register bank */
+};
-static struct at91_gpio_bank *gpio;
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val);
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset);
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+
+#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
+ { \
+ .chip = { \
+ .label = name, \
+ .request = at91_gpiolib_request, \
+ .direction_input = at91_gpiolib_direction_input, \
+ .direction_output = at91_gpiolib_direction_output, \
+ .get = at91_gpiolib_get, \
+ .set = at91_gpiolib_set, \
+ .dbg_show = at91_gpiolib_dbg_show, \
+ .base = base_gpio, \
+ .ngpio = nr_gpio, \
+ }, \
+ }
+
+static struct at91_gpio_chip gpio_chip[] = {
+ AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+};
+
static int gpio_banks;
-
static inline void __iomem *pin_to_controller(unsigned pin)
{
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
- return gpio[pin].regbase;
+ return gpio_chip[pin].regbase;
return NULL;
}
@@ -197,39 +237,6 @@
}
EXPORT_SYMBOL(at91_set_multi_drive);
-/*--------------------------------------------------------------------------*/
-
-/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
- * called, and maybe at91_set_multi_drive() for putout pins.
- */
-
-int gpio_direction_input(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + PIO_ODR);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*--------------------------------------------------------------------------*/
-
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
@@ -282,7 +289,7 @@
else
wakeups[bank] &= ~mask;
- set_irq_wake(gpio[bank].id, state);
+ set_irq_wake(gpio_chip[bank].bank->id, state);
return 0;
}
@@ -292,14 +299,14 @@
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
backups[i] = __raw_readl(pio + PIO_IMR);
__raw_writel(backups[i], pio + PIO_IDR);
__raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
- clk_disable(gpio[i].clock);
+ clk_disable(gpio_chip[i].bank->clock);
else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -313,10 +320,10 @@
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
if (!wakeups[i])
- clk_enable(gpio[i].clock);
+ clk_enable(gpio_chip[i].bank->clock);
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
@@ -380,12 +387,12 @@
{
unsigned pin;
struct irq_desc *gpio;
- struct at91_gpio_bank *bank;
+ struct at91_gpio_chip *at91_gpio;
void __iomem *pio;
u32 isr;
- bank = get_irq_chip_data(irq);
- pio = bank->regbase;
+ at91_gpio = get_irq_chip_data(irq);
+ pio = at91_gpio->regbase;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
@@ -396,14 +403,14 @@
*/
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
if (!isr) {
- if (!bank->next)
+ if (!at91_gpio->next)
break;
- bank = bank->next;
- pio = bank->regbase;
+ at91_gpio = at91_gpio->next;
+ pio = at91_gpio->regbase;
continue;
}
- pin = bank->chipbase;
+ pin = at91_gpio->chip.base;
gpio = &irq_desc[pin];
while (isr) {
@@ -502,17 +509,17 @@
void __init at91_gpio_irq_setup(void)
{
unsigned pioc, pin;
- struct at91_gpio_bank *this, *prev;
+ struct at91_gpio_chip *this, *prev;
- for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+ for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
- unsigned id = this->id;
+ unsigned id = this->bank->id;
unsigned i;
__raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+ for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
/*
@@ -537,32 +544,117 @@
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
}
+/* gpiolib support */
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + PIO_ODR);
+ return 0;
+}
+
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+ __raw_writel(mask, pio + PIO_OER);
+ return 0;
+}
+
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+ u32 pdsr;
+
+ pdsr = __raw_readl(pio + PIO_PDSR);
+ return (pdsr & mask) != 0;
+}
+
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned pin = chip->base + offset;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ /* Cannot request GPIOs that are in alternate function mode */
+ if (!(__raw_readl(pio + PIO_PSR) & mask))
+ return -EPERM;
+
+ return 0;
+}
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ unsigned pin = chip->base + i;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+ const char *gpio_label;
+
+ gpio_label = gpiochip_is_requested(chip, i);
+ if (gpio_label) {
+ seq_printf(s, "[%s] GPIO%s%d: ",
+ gpio_label, chip->label, i);
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "[gpio] %s\n",
+ at91_get_gpio_value(pin) ?
+ "set" : "clear");
+ else
+ seq_printf(s, "[periph %s]\n",
+ __raw_readl(pio + PIO_ABSR) &
+ mask ? "B" : "A");
+ }
+ }
+}
+
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
unsigned i;
- struct at91_gpio_bank *last;
+ struct at91_gpio_chip *at91_gpio, *last = NULL;
BUG_ON(nr_banks > MAX_GPIO_BANKS);
- gpio = data;
gpio_banks = nr_banks;
- for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
- data->chipbase = PIN_BASE + i * 32;
- data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+ for (i = 0; i < nr_banks; i++) {
+ at91_gpio = &gpio_chip[i];
+
+ at91_gpio->bank = &data[i];
+ at91_gpio->chip.base = PIN_BASE + i * 32;
+ at91_gpio->regbase = at91_gpio->bank->offset +
+ (void __iomem *)AT91_VA_BASE_SYS;
/* enable PIO controller's clock */
- clk_enable(data->clock);
+ clk_enable(at91_gpio->bank->clock);
- /*
- * Some processors share peripheral ID between multiple GPIO banks.
- * SAM9263 (PIOC, PIOD, PIOE)
- * CAP9 (PIOA, PIOB, PIOC, PIOD)
- */
- if (last && last->id == data->id)
- last->next = data;
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ if (last && last->bank->id == at91_gpio->bank->id)
+ last->next = at91_gpio;
+ last = at91_gpio;
+
+ gpiochip_add(&at91_gpio->chip);
}
}
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bffa674..04c91e3 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -213,32 +213,12 @@
*/
#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- at91_set_gpio_value(gpio, value);
-}
-
#include <asm-generic/gpio.h> /* cansleep wrappers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 944e42d..9522e20 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the linux kernel.
#
-obj-y := core.o clock.o gpio.o
+obj-y := core.o clock.o dma-m2p.o gpio.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 9604928..e8ebeae 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -41,6 +41,56 @@
.enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
};
+/* DMA Clocks */
+static struct clk clk_m2p0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00020000,
+};
+static struct clk clk_m2p1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00010000,
+};
+static struct clk clk_m2p2 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00080000,
+};
+static struct clk clk_m2p3 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00040000,
+};
+static struct clk clk_m2p4 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00200000,
+};
+static struct clk clk_m2p5 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00100000,
+};
+static struct clk clk_m2p6 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00800000,
+};
+static struct clk clk_m2p7 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00400000,
+};
+static struct clk clk_m2p8 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x02000000,
+};
+static struct clk clk_m2p9 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x01000000,
+};
+static struct clk clk_m2m0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x04000000,
+};
+static struct clk clk_m2m1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x08000000,
+};
+
#define INIT_CK(dev,con,ck) \
{ .dev_id = dev, .con_id = con, .clk = ck }
@@ -54,6 +104,18 @@
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
@@ -110,6 +172,22 @@
return (unsigned long)rate;
}
+static void __init ep93xx_dma_clock_init(void)
+{
+ clk_m2p0.rate = clk_h.rate;
+ clk_m2p1.rate = clk_h.rate;
+ clk_m2p2.rate = clk_h.rate;
+ clk_m2p3.rate = clk_h.rate;
+ clk_m2p4.rate = clk_h.rate;
+ clk_m2p5.rate = clk_h.rate;
+ clk_m2p6.rate = clk_h.rate;
+ clk_m2p7.rate = clk_h.rate;
+ clk_m2p8.rate = clk_h.rate;
+ clk_m2p9.rate = clk_h.rate;
+ clk_m2m0.rate = clk_h.rate;
+ clk_m2m1.rate = clk_h.rate;
+}
+
static int __init ep93xx_clock_init(void)
{
u32 value;
@@ -124,6 +202,7 @@
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+ ep93xx_dma_clock_init();
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
new file mode 100644
index 0000000..a2df5bb
--- /dev/null
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -0,0 +1,408 @@
+/*
+ * arch/arm/mach-ep93xx/dma-m2p.c
+ * M2P DMA handling for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ * I2S contains 3 Tx and 3 Rx DMA Channels
+ * AAC contains 3 Tx and 3 Rx DMA Channels
+ * UART1 contains 1 Tx and 1 Rx DMA Channels
+ * UART2 contains 1 Tx and 1 Rx DMA Channels
+ * UART3 contains 1 Tx and 1 Rx DMA Channels
+ * IrDA contains 1 Tx and 1 Rx DMA Channels
+ *
+ * SSP and IDE use the Memory to Memory (M2M) channels and are not covered
+ * with this implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+
+#define M2P_CONTROL 0x00
+#define M2P_CONTROL_STALL_IRQ_EN (1 << 0)
+#define M2P_CONTROL_NFB_IRQ_EN (1 << 1)
+#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3)
+#define M2P_CONTROL_ENABLE (1 << 4)
+#define M2P_INTERRUPT 0x04
+#define M2P_INTERRUPT_STALL (1 << 0)
+#define M2P_INTERRUPT_NFB (1 << 1)
+#define M2P_INTERRUPT_ERROR (1 << 3)
+#define M2P_PPALLOC 0x08
+#define M2P_STATUS 0x0c
+#define M2P_REMAIN 0x14
+#define M2P_MAXCNT0 0x20
+#define M2P_BASE0 0x24
+#define M2P_MAXCNT1 0x30
+#define M2P_BASE1 0x34
+
+#define STATE_IDLE 0 /* Channel is inactive. */
+#define STATE_STALL 1 /* Channel is active, no buffers pending. */
+#define STATE_ON 2 /* Channel is active, one buffer pending. */
+#define STATE_NEXT 3 /* Channel is active, two buffers pending. */
+
+struct m2p_channel {
+ char *name;
+ void __iomem *base;
+ int irq;
+
+ struct clk *clk;
+ spinlock_t lock;
+
+ void *client;
+ unsigned next_slot:1;
+ struct ep93xx_dma_buffer *buffer_xfer;
+ struct ep93xx_dma_buffer *buffer_next;
+ struct list_head buffers_pending;
+};
+
+static struct m2p_channel m2p_rx[] = {
+ {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1},
+ {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3},
+ {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5},
+ {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7},
+ {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9},
+ {NULL},
+};
+
+static struct m2p_channel m2p_tx[] = {
+ {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0},
+ {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2},
+ {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4},
+ {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6},
+ {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8},
+ {NULL},
+};
+
+static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf)
+{
+ if (ch->next_slot == 0) {
+ writel(buf->size, ch->base + M2P_MAXCNT0);
+ writel(buf->bus_addr, ch->base + M2P_BASE0);
+ } else {
+ writel(buf->size, ch->base + M2P_MAXCNT1);
+ writel(buf->bus_addr, ch->base + M2P_BASE1);
+ }
+ ch->next_slot ^= 1;
+}
+
+static void choose_buffer_xfer(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_xfer = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_xfer = buf;
+ }
+}
+
+static void choose_buffer_next(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_next = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_next = buf;
+ }
+}
+
+static inline void m2p_set_control(struct m2p_channel *ch, u32 v)
+{
+ /*
+ * The control register must be read immediately after being written so
+ * that the internal state machine is correctly updated. See the ep93xx
+ * users' guide for details.
+ */
+ writel(v, ch->base + M2P_CONTROL);
+ readl(ch->base + M2P_CONTROL);
+}
+
+static inline int m2p_channel_state(struct m2p_channel *ch)
+{
+ return (readl(ch->base + M2P_STATUS) >> 4) & 0x3;
+}
+
+static irqreturn_t m2p_irq(int irq, void *dev_id)
+{
+ struct m2p_channel *ch = dev_id;
+ struct ep93xx_dma_m2p_client *cl;
+ u32 irq_status, v;
+ int error = 0;
+
+ cl = ch->client;
+
+ spin_lock(&ch->lock);
+ irq_status = readl(ch->base + M2P_INTERRUPT);
+
+ if (irq_status & M2P_INTERRUPT_ERROR) {
+ writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT);
+ error = 1;
+ }
+
+ if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) {
+ spin_unlock(&ch->lock);
+ return IRQ_NONE;
+ }
+
+ switch (m2p_channel_state(ch)) {
+ case STATE_IDLE:
+ pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ BUG();
+ break;
+
+ case STATE_STALL:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ if (ch->buffer_next != NULL) {
+ cl->buffer_finished(cl->cookie, ch->buffer_next,
+ 0, error);
+ }
+ choose_buffer_xfer(ch);
+ choose_buffer_next(ch);
+ if (ch->buffer_xfer != NULL)
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_ON:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ ch->buffer_xfer = ch->buffer_next;
+ choose_buffer_next(ch);
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_NEXT:
+ pr_crit("m2p_irq: dma interrupt while next\n");
+ BUG();
+ break;
+ }
+
+ v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN |
+ M2P_CONTROL_NFB_IRQ_EN);
+ if (ch->buffer_xfer != NULL)
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ if (ch->buffer_next != NULL)
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ spin_unlock(&ch->lock);
+ return IRQ_HANDLED;
+}
+
+static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int i;
+
+ if (cl->flags & EP93XX_DMA_M2P_RX)
+ ch = m2p_rx;
+ else
+ ch = m2p_tx;
+
+ for (i = 0; ch[i].base; i++) {
+ struct ep93xx_dma_m2p_client *client;
+
+ client = ch[i].client;
+ if (client != NULL) {
+ int port;
+
+ port = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ if (port == (client->flags &
+ EP93XX_DMA_M2P_PORT_MASK)) {
+ pr_warning("DMA channel already used by %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-EBUSY);
+ }
+ }
+ }
+
+ for (i = 0; ch[i].base; i++) {
+ if (ch[i].client == NULL)
+ return ch + i;
+ }
+
+ pr_warning("No free DMA channel for %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-ENODEV);
+}
+
+static void channel_enable(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_m2p_client *cl = ch->client;
+ u32 v;
+
+ clk_enable(ch->clk);
+
+ v = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ writel(v, ch->base + M2P_PPALLOC);
+
+ v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK;
+ v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN;
+ m2p_set_control(ch, v);
+}
+
+static void channel_disable(struct m2p_channel *ch)
+{
+ u32 v;
+
+ v = readl(ch->base + M2P_CONTROL);
+ v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
+ m2p_set_control(ch, v);
+
+ while (m2p_channel_state(ch) == STATE_ON)
+ cpu_relax();
+
+ m2p_set_control(ch, 0x0);
+
+ while (m2p_channel_state(ch) == STATE_STALL)
+ cpu_relax();
+
+ clk_disable(ch->clk);
+}
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int err;
+
+ ch = find_free_channel(cl);
+ if (IS_ERR(ch))
+ return PTR_ERR(ch);
+
+ err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch);
+ if (err)
+ return err;
+
+ ch->client = cl;
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+
+ cl->channel = ch;
+
+ channel_enable(ch);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register);
+
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ free_irq(ch->irq, ch);
+ ch->client = NULL;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister);
+
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+ unsigned long flags;
+ u32 v;
+
+ spin_lock_irqsave(&ch->lock, flags);
+ v = readl(ch->base + M2P_CONTROL);
+ if (ch->buffer_xfer == NULL) {
+ ch->buffer_xfer = buf;
+ feed_buf(ch, buf);
+ cl->buffer_started(cl->cookie, buf);
+
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ } else if (ch->buffer_next == NULL) {
+ ch->buffer_next = buf;
+ feed_buf(ch, buf);
+
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+ } else {
+ list_add_tail(&buf->list, &ch->buffers_pending);
+ }
+ spin_unlock_irqrestore(&ch->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit);
+
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ list_add_tail(&buf->list, &ch->buffers_pending);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive);
+
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+ channel_enable(ch);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush);
+
+static int init_channel(struct m2p_channel *ch)
+{
+ ch->clk = clk_get(NULL, ch->name);
+ if (IS_ERR(ch->clk))
+ return PTR_ERR(ch->clk);
+
+ spin_lock_init(&ch->lock);
+ ch->client = NULL;
+
+ return 0;
+}
+
+static int __init ep93xx_dma_m2p_init(void)
+{
+ int i;
+ int ret;
+
+ for (i = 0; m2p_rx[i].base; i++) {
+ ret = init_channel(m2p_rx + i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; m2p_tx[i].base; i++) {
+ ret = init_channel(m2p_tx + i);
+ if (ret)
+ return ret;
+ }
+
+ pr_info("M2P DMA subsystem initialized\n");
+ return 0;
+}
+arch_initcall(ep93xx_dma_m2p_init);
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
index 5b5c22b..6171167 100644
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ b/arch/arm/mach-ep93xx/edb9307a.c
@@ -48,12 +48,24 @@
.phy_id = 1,
};
+static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
+ {
+ /* On-board battery backed RTC */
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+ /*
+ * The I2C signals are also routed to the Expansion Connector (J4)
+ */
+};
+
static void __init edb9307a_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9307a_flash);
ep93xx_register_eth(&edb9307a_eth_data, 1);
+
+ ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
}
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 0000000..ef6bd9d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct ep93xx_dma_buffer {
+ struct list_head list;
+ u32 bus_addr;
+ u16 size;
+};
+
+struct ep93xx_dma_m2p_client {
+ char *name;
+ u8 flags;
+ void *cookie;
+ void (*buffer_started)(void *cookie,
+ struct ep93xx_dma_buffer *buf);
+ void (*buffer_finished)(void *cookie,
+ struct ep93xx_dma_buffer *buf,
+ int bytes, int error);
+
+ /* Internal to the DMA code. */
+ void *channel;
+};
+
+#define EP93XX_DMA_M2P_PORT_I2S1 0x00
+#define EP93XX_DMA_M2P_PORT_I2S2 0x01
+#define EP93XX_DMA_M2P_PORT_AAC1 0x02
+#define EP93XX_DMA_M2P_PORT_AAC2 0x03
+#define EP93XX_DMA_M2P_PORT_AAC3 0x04
+#define EP93XX_DMA_M2P_PORT_I2S3 0x05
+#define EP93XX_DMA_M2P_PORT_UART1 0x06
+#define EP93XX_DMA_M2P_PORT_UART2 0x07
+#define EP93XX_DMA_M2P_PORT_UART3 0x08
+#define EP93XX_DMA_M2P_PORT_IRDA 0x09
+#define EP93XX_DMA_M2P_PORT_MASK 0x0f
+#define EP93XX_DMA_M2P_TX 0x00
+#define EP93XX_DMA_M2P_RX 0x10
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 22d6c9a..f66be12 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -58,7 +58,8 @@
/* AHB peripherals */
-#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_DMA_BASE ((void __iomem *) \
+ (EP93XX_AHB_VIRT_BASE + 0x00000000))
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index 4f35063..e2e0df8 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -21,16 +21,16 @@
#include <asm/hardware/dec21285.h>
#if 0
-static int fb_dma_request(dmach_t channel, dma_t *dma)
+static int fb_dma_request(unsigned int chan, dma_t *dma)
{
return -EINVAL;
}
-static void fb_dma_enable(dmach_t channel, dma_t *dma)
+static void fb_dma_enable(unsigned int chan, dma_t *dma)
{
}
-static void fb_dma_disable(dmach_t channel, dma_t *dma)
+static void fb_dma_disable(unsigned int chan, dma_t *dma)
{
}
@@ -42,7 +42,7 @@
};
#endif
-void __init arch_dma_init(dma_t *dma)
+static int __init fb_dma_init(void)
{
#if 0
dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
@@ -50,6 +50,8 @@
#endif
#ifdef CONFIG_ISA_DMA
if (footbridge_cfn_mode())
- isa_init_dma(dma + _ISA_DMA(0));
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index 2754daa..fe0c82e 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -14,6 +14,12 @@
Say 'Y' here if you want your kernel to run on the D-Link
DSM-320 Wireless Media Player.
+config MACH_ACS5K
+ bool "Brivo Systems LLC, ACS-5000 Master board"
+ help
+ say 'Y' here if you want your kernel to run on the Brivo
+ Systems LLC, ACS-5000 Master board.
+
endmenu
endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index f735d2c..7e3e816 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -17,3 +17,4 @@
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
+obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
new file mode 100644
index 0000000..9e3e5a6
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -0,0 +1,233 @@
+/*
+ * arch/arm/mach-ks8695/board-acs5k.c
+ *
+ * Brivo Systems LLC, ACS-5000 Master Board
+ *
+ * Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+ .udelay = 10,
+};
+
+static struct platform_device acs5k_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &acs5k_i2c_device_platdata,
+ },
+};
+
+static int acs5k_pca9555_setup(struct i2c_client *client,
+ unsigned gpio_base, unsigned ngpio,
+ void *context)
+{
+ static int acs5k_gpio_value[] = {
+ -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
+ };
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
+ gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
+ if (acs5k_gpio_value[n] < 0)
+ gpio_direction_input(gpio_base + n);
+ else
+ gpio_direction_output(gpio_base + n,
+ acs5k_gpio_value[n]);
+ gpio_export(gpio_base + n, 0); /* Export, direction locked down */
+ }
+
+ return 0;
+}
+
+static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
+ .gpio_base = 16, /* Start directly after the CPU's GPIO */
+ .invert = 0, /* Do not invert */
+ .setup = acs5k_pca9555_setup,
+};
+
+static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+ {
+ I2C_BOARD_INFO("pca9555", 0x20),
+ .platform_data = &acs5k_i2c_pca9555_platdata,
+ },
+};
+
+static void __devinit acs5k_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&acs5k_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, acs5k_i2c_devs,
+ ARRAY_SIZE(acs5k_i2c_devs));
+}
+
+static struct mtd_partition acs5k_nor_partitions[] = {
+ [0] = {
+ .name = "Boot Agent and config",
+ .size = SZ_256K,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_1M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "SquashFS1",
+ .size = SZ_2M,
+ .offset = SZ_256K + SZ_1M,
+ },
+ [3] = {
+ .name = "SquashFS2",
+ .size = SZ_4M + SZ_2M,
+ .offset = SZ_256K + SZ_1M + SZ_2M,
+ },
+ [4] = {
+ .name = "Data",
+ .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
+ .offset = SZ_256K + SZ_8M + SZ_1M,
+ }
+};
+
+static struct physmap_flash_data acs5k_nor_pdata = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(acs5k_nor_partitions),
+ .parts = acs5k_nor_partitions,
+};
+
+static struct resource acs5k_nor_resource[] = {
+ [0] = {
+ .start = SZ_32M, /* We expect the bootloader to map
+ * the flash here.
+ */
+ .end = SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SZ_32M + SZ_16M,
+ .end = SZ_32M + SZ_32M - SZ_256K - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device acs5k_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(acs5k_nor_resource),
+ .resource = acs5k_nor_resource,
+ .dev = {
+ .platform_data = &acs5k_nor_pdata,
+ },
+};
+
+static void __init acs5k_register_nor(void)
+{
+ int ret;
+
+ if (acs5k_nor_partitions[0].mask_flags == 0)
+ printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
+
+ ret = platform_device_register(&acs5k_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static int __init acs5k_protection_setup(char *s)
+{
+ /* We can't allocate anything here but we should be able
+ * to trivially parse s and decide if we can protect the
+ * bootloader partition or not
+ */
+ if (strcmp(s, "no") == 0)
+ acs5k_nor_partitions[0].mask_flags = 0;
+
+ return 1;
+}
+
+__setup("protect_bootloader=", acs5k_protection_setup);
+
+static void __init acs5k_init_gpio(void)
+{
+ int i;
+
+ ks8695_register_gpios();
+ for (i = 0; i < 4; ++i)
+ gpio_request(i, "ACS5K IRQ");
+ gpio_request(7, "ACS5K KS_FRDY");
+ for (i = 8; i < 16; ++i)
+ gpio_request(i, "ACS5K Unused");
+
+ gpio_request(3, "ACS5K CAN Control");
+ gpio_request(6, "ACS5K Heartbeat");
+ gpio_direction_output(3, 1); /* Default CAN_RESET high */
+ gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
+ gpio_export(3, 0); /* export CAN_RESET as output only */
+ gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
+}
+
+static void __init acs5k_init(void)
+{
+ acs5k_init_gpio();
+
+ /* Network device */
+ ks8695_add_device_lan(); /* eth0 = LAN */
+ ks8695_add_device_wan(); /* ethX = WAN */
+
+ /* NOR devices */
+ acs5k_register_nor();
+
+ /* I2C bus */
+ acs5k_i2c_init();
+}
+
+MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
+ /* Maintainer: Simtec Electronics. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = acs5k_init,
+ .timer = &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8eea730..33214c1 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -40,6 +40,9 @@
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
+config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
endchoice
config MACH_INTELMOTE2
@@ -254,6 +257,10 @@
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
config MACH_COLIBRI
bool "Toradex Colibri PX27x"
select PXA27x
@@ -295,8 +302,15 @@
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
@@ -319,6 +333,16 @@
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
+
config MACH_PALMTX
bool "Palm T|X"
default y
@@ -339,6 +363,16 @@
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 7b28bb5..361fcfa 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -28,6 +28,7 @@
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
@@ -45,6 +46,7 @@
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
@@ -53,7 +55,9 @@
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 77ee80e..3499fad 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
new file mode 100644
index 0000000..4bd10a1
--- /dev/null
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -0,0 +1,295 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO32_GPIO,
+ GPIO48_GPIO,
+ GPIO49_GPIO,
+ GPIO51_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+
+ /* this is the 16-bit hdb bus 58-73 */
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN 16
+#define CFG_GPIO_PIN 17
+#define RDY_GPIO_PIN 32
+#define DC_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define LED_GPIO_PIN 51
+#define RD_GPIO_PIN 74
+#define WR_GPIO_PIN 75
+#define CS_GPIO_PIN 76
+#define IRQ_GPIO_PIN 77
+
+/* hdb bus */
+#define DB0_GPIO_PIN 58
+#define DB15_GPIO_PIN 73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+ RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+ IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+ "CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+ /* todo: improve err recovery */
+ wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+ return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+ int i;
+ int err;
+ char dbname[8];
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ /* we also need to take care of the hdb bus */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+ sprintf(dbname, "DB%d", i);
+ err = gpio_request(i, dbname);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %d, err=%d\n", i, err);
+ while (i >= DB0_GPIO_PIN)
+ gpio_free(i--);
+ i = ARRAY_SIZE(gpios) - 1;
+ goto err_req_gpio;
+ }
+ }
+
+ /* setup the outputs and init values */
+ gpio_direction_output(PWR_GPIO_PIN, 0);
+ gpio_direction_output(CFG_GPIO_PIN, 1);
+ gpio_direction_output(DC_GPIO_PIN, 0);
+ gpio_direction_output(RD_GPIO_PIN, 1);
+ gpio_direction_output(WR_GPIO_PIN, 1);
+ gpio_direction_output(CS_GPIO_PIN, 1);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ /* setup the inputs */
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(IRQ_GPIO_PIN);
+
+ /* start the hdb bus as an input */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_direction_output(i, 0);
+
+ /* go into command mode */
+ gpio_set_value(CFG_GPIO_PIN, 1);
+ gpio_set_value(RST_GPIO_PIN, 0);
+ msleep(10);
+ gpio_set_value(RST_GPIO_PIN, 1);
+ msleep(10);
+ am300_wait_event(par);
+
+ return 0;
+
+err_req_gpio:
+ while (i > 0)
+ gpio_free(gpios[i--]);
+
+ return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+ return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+ int i;
+
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+ u16 res = 0;
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+ return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+ u8 state)
+{
+ switch (bit) {
+ case BS_CS:
+ gpio_set_value(CS_GPIO_PIN, state);
+ break;
+ case BS_DC:
+ gpio_set_value(DC_GPIO_PIN, state);
+ break;
+ case BS_WR:
+ gpio_set_value(WR_GPIO_PIN, state);
+ break;
+ }
+}
+
+static int am300_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+ struct broadsheetfb_par *par = dev_id;
+
+ wake_up(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+ int ret;
+ struct broadsheetfb_par *par = info->par;
+
+ ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+ IRQF_DISABLED|IRQF_TRIGGER_RISING,
+ "AM300", par);
+ if (ret)
+ dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static struct broadsheet_board am300_board = {
+ .owner = THIS_MODULE,
+ .init = am300_init_board,
+ .cleanup = am300_cleanup,
+ .set_hdb = am300_set_hdb,
+ .get_hdb = am300_get_hdb,
+ .set_ctl = am300_set_ctl,
+ .wait_for_rdy = am300_wait_event,
+ .get_panel_type = am300_get_panel_type,
+ .setup_irq = am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+ int ret;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+ /* request our platform independent driver */
+ request_module("broadsheetfb");
+
+ am300_device = platform_device_alloc("broadsheetfb", -1);
+ if (!am300_device)
+ return -ENOMEM;
+
+ /* the am300_board that will be seen by broadsheetfb is a copy */
+ platform_device_add_data(am300_device, &am300_board,
+ sizeof(am300_board));
+
+ ret = platform_device_add(am300_device);
+
+ if (ret) {
+ platform_device_put(am300_device);
+ return ret;
+ }
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 83a4cdf..253fd76 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,10 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/bitfield.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index df83b97..34576ba 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -17,7 +17,7 @@
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 3156b25..7873fa3 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d99fd9e..117b5435f 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,8 +22,6 @@
#include <asm/mach/map.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -96,7 +94,7 @@
};
static struct dm9000_plat_data cmx270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device cmx2xx_dm9000_device = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index ff0c577..a9f48b1 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -28,9 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa300.h>
-
-#include <mach/hardware.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
@@ -162,7 +160,7 @@
};
static struct dm9000_plat_data cm_x300_dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
+ .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device dm9000_device = {
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index e847362..26493ae 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -28,8 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a8d91b6..3b89e50 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -41,9 +41,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 411607b..d9b9631 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -22,7 +22,6 @@
#include <linux/string.h>
#include <mach/corgi.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e352590..7f04b3a 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -24,7 +24,6 @@
#include <mach/sharpsl.h>
#include <mach/corgi.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8e2f221..a5ee707 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -20,7 +20,6 @@
#include <asm/mach-types.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/regs-ssp.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 771dd4e..083a1d8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -37,8 +37,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#ifdef DEBUG
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 968c830..67f34a8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -15,8 +15,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx-regs.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index e16f8e3..d245e59c 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,7 +4,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 7de17fc..01217e0 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -23,8 +23,6 @@
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
-
struct dma_channel {
char *name;
pxa_dma_prio prio;
@@ -113,7 +111,7 @@
return IRQ_HANDLED;
}
-int __init pxa_init_dma(int num_ch)
+int __init pxa_init_dma(int irq, int num_ch)
{
int i, ret;
@@ -131,7 +129,7 @@
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
}
- ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+ ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
kfree(dma_channels);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 1bd7f74..74d3f89 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -20,9 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index edcd9d5..0800362 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -21,9 +21,7 @@
#include <asm/mach-types.h>
#include <mach/irqs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 77bb8e2..ed9c0c3 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -22,9 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00..e0c3aaf 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -24,9 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8e..84b050f 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index cc9b129..f8924f6 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f5ed803..920dfb8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -11,40 +11,63 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
#include "generic.h"
+#include "devices.h"
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ (41)
+/* EM-X270 specific GPIOs */
#define GPIO13_MMC_CD (13)
+#define GPIO95_MMC_WP (95)
+#define GPIO56_NAND_RB (56)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD (114)
+#define GPIO20_NAND_RB (20)
+#define GPIO38_SD_PWEN (38)
+
+/* common GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO93_CAM_RESET (93)
+#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS (11)
-#define GPIO56_NAND_RB (56)
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
-static unsigned long em_x270_pin_config[] = {
+static unsigned long common_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
@@ -150,21 +173,32 @@
GPIO18_RDY,
/* GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
- GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
- GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
+static unsigned long em_x270_pin_config[] = {
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO95_GPIO, /* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+ GPIO20_GPIO, /* NAND Ready/Busy */
+ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO114_GPIO, /* MMC card detect */
+};
+
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
@@ -185,7 +219,7 @@
};
static struct dm9000_plat_data em_x270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_NO_EEPROM,
};
static struct platform_device em_x270_dm9000 = {
@@ -200,6 +234,7 @@
static void __init em_x270_init_dm9000(void)
{
+ em_x270_dm9000_platdata.flags |= dm9000_flags;
platform_device_register(&em_x270_dm9000);
}
#else
@@ -289,7 +324,7 @@
{
dsb();
- return gpio_get_value(GPIO56_NAND_RB);
+ return gpio_get_value(nand_rb);
}
static struct mtd_partition em_x270_partition_info[] = {
@@ -354,14 +389,14 @@
gpio_direction_output(GPIO11_NAND_CS, 1);
- err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+ err = gpio_request(nand_rb, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
- gpio_direction_input(GPIO56_NAND_RB);
+ gpio_direction_input(nand_rb);
platform_device_register(&em_x270_nand);
}
@@ -369,6 +404,61 @@
static inline void em_x270_init_nand(void) {}
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Environment",
+ .offset = 0x00050000,
+ .size = 0x00010000,
+ }, {
+ .name = "Reserved",
+ .offset = 0x00060000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Splashscreen",
+ .offset = 0x000b0000,
+ .size = 0x00050000,
+ }
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = em_x270_nor_parts,
+ .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+ },
+};
+
+static struct resource em_x270_nor_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &em_x270_nor_flash_resource,
+ .dev = {
+ .platform_data = &em_x270_nor_data,
+ },
+};
+
+static void __init em_x270_init_nor(void)
+{
+ platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
@@ -395,40 +485,93 @@
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
- int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ int err;
+
+ em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+ if (IS_ERR(em_x270_sdio_ldo)) {
+ dev_err(dev, "can't request SDIO power supply: %ld\n",
+ PTR_ERR(em_x270_sdio_ldo));
+ return PTR_ERR(em_x270_sdio_ldo);
+ }
+
+ err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
- printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
- __func__, err);
- return err;
+ dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+ goto err_irq;
+ }
+
+ if (machine_is_em_x270()) {
+ err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+ if (err) {
+ dev_err(dev, "can't request MMC write protect: %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_input(GPIO95_MMC_WP);
+ } else {
+ err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+ if (err) {
+ dev_err(dev, "can't request MMC power control : %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_output(GPIO38_SD_PWEN, 1);
}
return 0;
+
+err_gpio_wp:
+ free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+ regulator_put(em_x270_sdio_ldo);
+
+ return err;
}
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
- /*
- FIXME: current hardware implementation does not allow to
- enable/disable MMC power. This will be fixed in next HW releases,
- and we'll need to add implmentation here.
- */
- return;
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+ regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+ regulator_enable(em_x270_sdio_ldo);
+ } else {
+ regulator_disable(em_x270_sdio_ldo);
+ }
}
static void em_x270_mci_exit(struct device *dev, void *data)
{
- int irq = gpio_to_irq(GPIO13_MMC_CD);
- free_irq(irq, data);
+ free_irq(gpio_to_irq(mmc_cd), data);
+ regulator_put(em_x270_sdio_ldo);
+
+ if (machine_is_em_x270())
+ gpio_free(GPIO95_MMC_WP);
+ else
+ gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO95_MMC_WP);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
- .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
@@ -436,33 +579,53 @@
static void __init em_x270_init_mmc(void)
{
+ if (machine_is_em_x270())
+ em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+ em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
-/* LCD 480x640 */
+/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
- .pixclock = 50000,
- .bpp = 16,
- .xres = 480,
- .yres = 640,
- .hsync_len = 8,
- .vsync_len = 2,
- .left_margin = 8,
- .upper_margin = 0,
- .right_margin = 24,
- .lower_margin = 4,
- .cmap_greyscale = 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38250,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .sync = 0,
+ },
};
static struct pxafb_mach_info em_x270_lcd = {
- .modes = &em_x270_lcd_mode,
- .num_modes = 1,
+ .modes = em_x270_lcd_modes,
+ .num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
+
static void __init em_x270_init_lcd(void)
{
set_pxa_fb_info(&em_x270_lcd);
@@ -471,6 +634,40 @@
static inline void em_x270_init_lcd(void) {}
#endif
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+};
+
+static void __init em_x270_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
@@ -481,23 +678,76 @@
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
- .matrix_key_map = em_x270_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
+ .matrix_key_map = em_x270_module_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+ KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+ KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+ KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+ KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+ KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+ KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+ KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+ KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+ KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+ KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+ KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+ KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+ KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+ KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+ KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+ KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+ KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+ KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+ KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+ KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+ KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+ KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+ KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+ KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+ KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+ KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+ KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+ KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+ KEY(7, 4, 0), KEY(7, 5, 0),
+ KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 8,
+ .matrix_key_map = em_x270_exeda_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
- pxa_set_keypad_info(&em_x270_keypad_info);
+ if (machine_is_em_x270())
+ pxa_set_keypad_info(&em_x270_module_keypad_info);
+ else
+ pxa_set_keypad_info(&em_x270_exeda_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
@@ -535,19 +785,264 @@
static inline void em_x270_init_gpio_keys(void) {}
#endif
-static void __init em_x270_init(void)
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
{
+ int ret;
+
+ ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ if (ret)
+ return ret;
+
+ gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+ em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+ if (em_x270_camera_ldo == NULL) {
+ gpio_free(GPIO93_CAM_RESET);
+ return -ENODEV;
+ }
+
+ ret = regulator_enable(em_x270_camera_ldo);
+ if (ret) {
+ regulator_put(em_x270_camera_ldo);
+ gpio_free(GPIO93_CAM_RESET);
+ return ret;
+ }
+
+ gpio_set_value(GPIO93_CAM_RESET, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+ .init = em_x270_sensor_init,
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+ int ret;
+ int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+ if (on == is_on)
+ return 0;
+
+ gpio_set_value(GPIO93_CAM_RESET, !on);
+
+ if (on)
+ ret = regulator_enable(em_x270_camera_ldo);
+ else
+ ret = regulator_disable(em_x270_camera_ldo);
+
+ if (ret)
+ return ret;
+
+ gpio_set_value(GPIO93_CAM_RESET, on);
+
+ return 0;
+}
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0,
+ .power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+ {
+ I2C_BOARD_INFO("mt9m111", 0x48),
+ .platform_data = &iclink,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_camera(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev, _supply) \
+ static struct regulator_consumer_supply _name##_consumers[] = { \
+ { \
+ .dev = _dev, \
+ .supply = _supply, \
+ }, \
+ }
+
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
+ static struct regulator_init_data _ldo##_data = { \
+ .constraints = { \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .state_mem = { \
+ .enabled = 0, \
+ }, \
+ .valid_ops_mask = _ops_mask, \
+ }, \
+ .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
+ .consumer_supplies = _ldo##_consumers, \
+ };
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+
+struct led_info em_x270_led_info = {
+ .name = "em-x270:orange",
+ .default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+ .name = "LP555597P6H-FPS",
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .voltage_max_design = 4200000,
+ .voltage_min_design = 3000000,
+ .use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+ apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+ .battery_info = &em_x270_psy_info,
+
+ .charge_milliamp = 1000,
+ .charge_millivolt = 4200,
+
+ .vbat_low = 3600,
+ .vbat_crit = 3400,
+ .vbat_charge_start = 4100,
+ .vbat_charge_stop = 4200,
+ .vbat_charge_restart = 4000,
+
+ .vcharge_min = 3200,
+ .vcharge_max = 5500,
+
+ .tbat_low = 197,
+ .tbat_high = 78,
+ .tbat_restart = 100,
+
+ .batmon_interval = 0,
+
+ .battery_low = em_x270_battery_low,
+ .battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata) \
+ { \
+ .name = "da903x-" #_name, \
+ .id = DA9030_ID_##_id, \
+ .platform_data = _pdata, \
+ }
+
+#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+ DA9030_LDO(3),
+ DA9030_LDO(5),
+ DA9030_LDO(10),
+ DA9030_LDO(12),
+ DA9030_LDO(19),
+
+ DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+ DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+ DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+ .subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_GPIO(0),
+ .platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+ pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+ i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static void __init em_x270_module_init(void)
+{
+ pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+ mmc_cd = GPIO13_MMC_CD;
+ nand_rb = GPIO56_NAND_RB;
+ dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+ pr_info("%s\n", __func__);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+ mmc_cd = GPIO114_MMC_CD;
+ nand_rb = GPIO20_NAND_RB;
+ dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ if (machine_is_em_x270())
+ em_x270_module_init();
+ else if (machine_is_exeda())
+ em_x270_exeda_init();
+ else
+ panic("Unsupported machine: %d\n", machine_arch_type);
+
+ em_x270_init_da9030();
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
+ em_x270_init_nor();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
+ em_x270_init_camera();
+ em_x270_init_spi();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
@@ -559,3 +1054,13 @@
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = em_x270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index dfce7d5..c60dadf 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,8 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index df5f822..92ba16e 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -19,18 +19,16 @@
#include <linux/input.h>
#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 0ccc91c..3126a35 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -26,8 +26,9 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/reset.h>
+#include <mach/gpio.h>
+#include <mach/pxa2xx-gpio.h>
#include "generic.h"
@@ -127,3 +128,33 @@
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
get_clk_frequency_khz(1);
}
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+ unsigned long flags;
+ int gpio = gpio_mode & GPIO_MD_MASK_NR;
+ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+ int gafr;
+
+ if (gpio > pxa_last_gpio)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ if (gpio_mode & GPIO_DFLT_LOW)
+ GPCR(gpio) = GPIO_bit(gpio);
+ else if (gpio_mode & GPIO_DFLT_HIGH)
+ GPSR(gpio) = GPIO_bit(gpio);
+ if (gpio_mode & GPIO_MD_MASK_DIR)
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index dc876a8..3465268 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -9,20 +9,17 @@
* published by the Free Software Foundation.
*/
-typedef int (*set_wake_t)(unsigned int, unsigned int);
-
struct sys_timer;
extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
-extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
+extern void __init pxa_init_irq(int irq_nr,
+ int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
-extern int pxa_last_gpio;
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 5fec1e4..7c22670 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -13,22 +13,34 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/irq.h>
-#include <linux/sysdev.h>
#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/gpio.h>
-#include "generic.h"
+int pxa_last_gpio;
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
@@ -40,195 +52,138 @@
struct pxa_gpio_chip {
struct gpio_chip chip;
- void __iomem *regbase;
+ void __iomem *regbase;
+ char label[10];
+
+ unsigned long irq_mask;
+ unsigned long irq_edge_rise;
+ unsigned long irq_edge_fall;
+
+#ifdef CONFIG_PM
+ unsigned long saved_gplr;
+ unsigned long saved_gpdr;
+ unsigned long saved_grer;
+ unsigned long saved_gfer;
+#endif
};
-int pxa_last_gpio;
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static int __gpio_is_inverted(unsigned gpio)
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
{
- return cpu_is_pxa25x() && gpio > 85;
+ return container_of(c, struct pxa_gpio_chip, chip)->regbase;
}
-#else
-#define __gpio_is_inverted(gpio) (0)
-#endif
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
{
- unsigned long flags;
- int gpio = gpio_mode & GPIO_MD_MASK_NR;
- int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
- int gafr;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- local_irq_save(flags);
- if (gpio_mode & GPIO_DFLT_LOW)
- GPCR(gpio) = GPIO_bit(gpio);
- else if (gpio_mode & GPIO_DFLT_HIGH)
- GPSR(gpio) = GPIO_bit(gpio);
- if (gpio_mode & GPIO_MD_MASK_DIR)
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
- local_irq_restore(flags);
-
- return 0;
+ return &pxa_gpio_chips[gpio_to_bank(gpio)];
}
-EXPORT_SYMBOL(pxa_gpio_mode);
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 value;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t value, mask = 1 << offset;
+ unsigned long flags;
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- value = __raw_readl(gpdr);
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ value = __raw_readl(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
value |= mask;
else
value &= ~mask;
- __raw_writel(value, gpdr);
- local_irq_restore(flags);
+ __raw_writel(value, base + GPDR_OFFSET);
+ spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
static int pxa_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned offset, int value)
{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t tmp, mask = 1 << offset;
+ unsigned long flags;
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- __raw_writel(mask,
- pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- tmp = __raw_readl(gpdr);
+ __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ tmp = __raw_readl(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
tmp &= ~mask;
else
tmp |= mask;
- __raw_writel(tmp, gpdr);
- local_irq_restore(flags);
+ __raw_writel(tmp, base + GPDR_OFFSET);
+ spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
-/*
- * Return GPIO level
- */
static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
+ return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
}
-/*
- * Set output GPIO level
- */
static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
-
- if (value)
- __raw_writel(mask, pxa->regbase + GPSR_OFFSET);
- else
- __raw_writel(mask, pxa->regbase + GPCR_OFFSET);
+ __raw_writel(1 << offset, gpio_chip_base(chip) +
+ (value ? GPSR_OFFSET : GPCR_OFFSET));
}
-#define GPIO_CHIP(_n) \
- [_n] = { \
- .regbase = GPIO##_n##_BASE, \
- .chip = { \
- .label = "gpio-" #_n, \
- .direction_input = pxa_gpio_direction_input, \
- .direction_output = pxa_gpio_direction_output, \
- .get = pxa_gpio_get, \
- .set = pxa_gpio_set, \
- .base = (_n) * 32, \
- .ngpio = 32, \
- }, \
- }
-
-static struct pxa_gpio_chip pxa_gpio_chip[] = {
- GPIO_CHIP(0),
- GPIO_CHIP(1),
- GPIO_CHIP(2),
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- GPIO_CHIP(3),
-#endif
-};
-
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-
-static unsigned long GPIO_IRQ_rising_edge[4];
-static unsigned long GPIO_IRQ_falling_edge[4];
-static unsigned long GPIO_IRQ_mask[4];
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static int __gpio_is_occupied(unsigned gpio)
+static int __init pxa_init_gpio_chip(int gpio_end)
{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
+ /* this is early, we have to use bootmem allocator, and we really
+ * want this to be allocated dynamically for different 'gpio_end'
+ */
+ chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
}
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+ struct gpio_chip *c = &chips[i].chip;
+
+ sprintf(chips[i].label, "gpio-%d", i);
+ chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+ c->base = gpio;
+ c->label = chips[i].label;
+
+ c->direction_input = pxa_gpio_direction_input;
+ c->direction_output = pxa_gpio_direction_output;
+ c->get = pxa_gpio_get;
+ c->set = pxa_gpio_set;
+
+ /* number of GPIOs on last bank may be less than 32 */
+ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+ gpiochip_add(c);
+ }
+ pxa_gpio_chips = chips;
return 0;
}
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
- int gpio, idx;
+ struct pxa_gpio_chip *c;
+ int gpio = irq_to_gpio(irq);
+ unsigned long gpdr, mask = GPIO_bit(gpio);
- gpio = IRQ_TO_GPIO(irq);
- idx = gpio >> 5;
+ c = gpio_to_chip(gpio);
if (type == IRQ_TYPE_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or
* GPIOs set to alternate function or to output during probe
*/
- if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
- (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
+ if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
return 0;
if (__gpio_is_occupied(gpio))
@@ -237,23 +192,25 @@
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
+ gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
if (__gpio_is_inverted(gpio))
- GPDR(gpio) |= GPIO_bit(gpio);
+ __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
else
- GPDR(gpio) &= ~GPIO_bit(gpio);
+ __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
if (type & IRQ_TYPE_EDGE_RISING)
- __set_bit(gpio, GPIO_IRQ_rising_edge);
+ c->irq_edge_rise |= mask;
else
- __clear_bit(gpio, GPIO_IRQ_rising_edge);
+ c->irq_edge_rise &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
- __set_bit(gpio, GPIO_IRQ_falling_edge);
+ c->irq_edge_fall |= mask;
else
- __clear_bit(gpio, GPIO_IRQ_falling_edge);
+ c->irq_edge_fall &= ~mask;
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
@@ -261,87 +218,62 @@
return 0;
}
-/*
- * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
- GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static void pxa_mask_low_gpio(unsigned int irq)
-{
- ICMR &= ~(1 << (irq - PXA_IRQ(0)));
-}
-
-static void pxa_unmask_low_gpio(unsigned int irq)
-{
- ICMR |= 1 << (irq - PXA_IRQ(0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
- .name = "GPIO-l",
- .ack = pxa_ack_low_gpio,
- .mask = pxa_mask_low_gpio,
- .unmask = pxa_unmask_low_gpio,
- .set_type = pxa_gpio_irq_type,
-};
-
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE)
-
static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
{
- int loop, bit, n;
- unsigned long gedr[4];
+ struct pxa_gpio_chip *c;
+ int loop, gpio, gpio_base, n;
+ unsigned long gedr;
do {
- gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
- gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
- gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
- gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
-
- GEDR0 = gedr[0]; GEDR1 = gedr[1];
- GEDR2 = gedr[2]; GEDR3 = gedr[3];
-
loop = 0;
- bit = find_first_bit(gedr, GEDR_BITS);
- while (bit < GEDR_BITS) {
- loop = 1;
+ for_each_gpio_chip(gpio, c) {
+ gpio_base = c->chip.base;
- n = PXA_GPIO_IRQ_BASE + bit;
- generic_handle_irq(n);
+ gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = gedr & c->irq_mask;
+ __raw_writel(gedr, c->regbase + GEDR_OFFSET);
- bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
+ n = find_first_bit(&gedr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ loop = 1;
+
+ generic_handle_irq(gpio_to_irq(gpio_base + n));
+ n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+ }
}
} while (loop);
}
static void pxa_ack_muxed_gpio(unsigned int irq)
{
- int gpio = irq - IRQ_GPIO(2) + 2;
- GEDR(gpio) = GPIO_bit(gpio);
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
}
static void pxa_mask_muxed_gpio(unsigned int irq)
{
- int gpio = irq - IRQ_GPIO(2) + 2;
- __clear_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) &= ~GPIO_bit(gpio);
- GFER(gpio) &= ~GPIO_bit(gpio);
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ uint32_t grer, gfer;
+
+ c->irq_mask &= ~GPIO_bit(gpio);
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
}
static void pxa_unmask_muxed_gpio(unsigned int irq)
{
- int gpio = irq - IRQ_GPIO(2) + 2;
- int idx = gpio >> 5;
- __set_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ c->irq_mask |= GPIO_bit(gpio);
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
}
static struct irq_chip pxa_muxed_gpio_chip = {
@@ -352,85 +284,65 @@
.set_type = pxa_gpio_irq_type,
};
-void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
{
- int irq, i, gpio;
+ struct pxa_gpio_chip *c;
+ int gpio, irq;
- pxa_last_gpio = gpio_nr - 1;
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ pxa_init_gpio_chip(end);
/* clear all GPIO edge detects */
- for (i = 0; i < gpio_nr; i += 32) {
- GFER(i) = 0;
- GRER(i) = 0;
- GEDR(i) = GEDR(i);
+ for_each_gpio_chip(gpio, c) {
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
}
- /* GPIO 0 and 1 must have their mask bit always set */
- GPIO_IRQ_mask[0] = 3;
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
- set_irq_chip(irq, &pxa_low_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
+ for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
set_irq_chip(irq, &pxa_muxed_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* Install handler for GPIO>=2 edge detect interrupts */
- set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
- pxa_low_gpio_chip.set_wake = fn;
+ set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
pxa_muxed_gpio_chip.set_wake = fn;
-
- /* add a GPIO chip for each register bank.
- * the last PXA25x register only contains 21 GPIOs
- */
- for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
- if (gpio + 32 > gpio_nr)
- pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
- gpiochip_add(&pxa_gpio_chip[i].chip);
- }
}
#ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
{
- int i, gpio;
+ struct pxa_gpio_chip *c;
+ int gpio;
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
- saved_gplr[i] = GPLR(gpio);
- saved_gpdr[i] = GPDR(gpio);
- saved_grer[i] = GRER(gpio);
- saved_gfer[i] = GFER(gpio);
+ for_each_gpio_chip(gpio, c) {
+ c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+ c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
/* Clear GPIO transition detect bits */
- GEDR(gpio) = GEDR(gpio);
+ __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
}
return 0;
}
static int pxa_gpio_resume(struct sys_device *dev)
{
- int i, gpio;
+ struct pxa_gpio_chip *c;
+ int gpio;
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+ for_each_gpio_chip(gpio, c) {
/* restore level with set/clear */
- GPSR(gpio) = saved_gplr[i];
- GPCR(gpio) = ~saved_gplr[i];
+ __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
- GRER(gpio) = saved_grer[i];
- GFER(gpio) = saved_gfer[i];
- GPDR(gpio) = saved_gpdr[i];
+ __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+ __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+ __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
}
return 0;
}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e296ce1..ca9912e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -38,14 +38,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-
#include "generic.h"
static struct resource flash_resource = {
@@ -191,6 +189,11 @@
return 0;
}
+int __attribute__((weak)) am300_init(void)
+{
+ return 0;
+}
+
static void __init carrier_board_init(void)
{
/*
@@ -198,6 +201,7 @@
* they cannot be detected programatically
*/
am200_init();
+ am300_init();
}
static void __init gumstix_init(void)
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index da6e442..6a197fb 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -24,14 +24,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
+#include <mach/pxa25x.h>
#include <mach/h5000.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/udc.h>
+
#include "generic.h"
/*
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
new file mode 100644
index 0000000..cea99fe
--- /dev/null
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -0,0 +1,166 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0,
+ .right_margin = 31,
+ .upper_margin = 15,
+ .lower_margin = 0,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 80,
+ .pixclk_divider = 15,
+ .pixclk_divider_rotated = 15,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 0xb,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+ .init_data1 = 0xffff0000, /* GPIO_DATA */
+ .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+ .num_modes = 1,
+ .regs = &himalaya_lcd_regs,
+ .gpio = &himalaya_w100_gpio_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device himalaya_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &himalaya_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(himalaya_fb_resources),
+ .resource = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+ int himalaya_boardid;
+
+ himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+ printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+ himalaya_boardid);
+
+ switch (himalaya_boardid) {
+ case 0x4:
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ break;
+ case 0x6:
+ himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+ break;
+ default:
+ printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+ himalaya_boardid);
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ }
+}
+
+static void __init himalaya_init(void)
+{
+ himalaya_lcd_init();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .init_machine = himalaya_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 013b15b..b6243b5 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 364c5e2..2121309 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -28,11 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
+#include <mach/pxa27x.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/regs-ssp.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 7804637..b0812f5 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -12,6 +12,62 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+#include <mach/hardware.h>
+
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT io_p2v(0x40000000)
+#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n) DMAC_REG((n) << 2)
+#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
+#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
+#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+ (((n) & 0x3f) << 2))
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+#endif
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
/*
* Descriptor structure for PXA's DMA engine
* Note: this structure must always be aligned to a 16-byte boundary.
@@ -34,7 +90,7 @@
* DMA registration
*/
-int __init pxa_init_dma(int num_ch);
+int __init pxa_init_dma(int irq, int num_ch);
int pxa_request_dma (char *name,
pxa_dma_prio prio,
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8..406fa10 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,16 +24,87 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/pxa-regs.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
-
#include <asm-generic/gpio.h>
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) > 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
+extern int pxa_last_gpio;
+
#define NR_BUILTIN_GPIO 128
static inline int gpio_get_value(unsigned gpio)
@@ -56,10 +127,45 @@
}
}
-#define gpio_cansleep __gpio_cansleep
-
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 099f54a..06abd41 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -97,4 +97,5 @@
/* for expansion boards that can't be programatically detected */
extern int am200_init(void);
+extern int am300_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 4cb2415..751b748 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -25,7 +25,6 @@
/* FPGA register virtual addresses */
#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 38d68d9..82a399f 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -69,7 +69,7 @@
#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3)
+#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
/*
* CPLD EGPIOs
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index cfca815..297387e 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,8 +15,8 @@
#ifndef __ARCH_PXA_MTD_XIP_H__
#define __ARCH_PXA_MTD_XIP_H__
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
new file mode 100644
index 0000000..7c295a4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -0,0 +1,109 @@
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors: Alex Osborne <ato@meshy.org>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET 1
+#define GPIO_NR_PALMLD_POWER_DETECT 4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMLD_POWER_SWITCH 12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 13
+#define GPIO_NR_PALMLD_LOCK_SWITCH 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N 14
+#define GPIO_NR_PALMLD_SD_POWER 114
+#define GPIO_NR_PALMLD_SD_READONLY 116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ 27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE 108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER 19
+#define GPIO_NR_PALMLD_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH 21
+#define GPIO_NR_PALMLD_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER 17
+#define GPIO_NR_PALMLD_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY 38
+#define GPIO_NR_PALMLD_PCMCIA_POWER 36
+#define GPIO_NR_PALMLD_PCMCIA_RESET 81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN 52
+#define GPIO_NR_PALMLD_LED_AMBER 94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_IRQ 95
+#define GPIO_NR_PALMLD_IDE_RESET 98
+#define GPIO_NR_PALMLD_IDE_PWEN 115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N 3
+#define GPIO_NR_PALMLD_USB_READY 86
+#define GPIO_NR_PALMLD_USB_RESET 88
+#define GPIO_NR_PALMLD_USB_INT 106
+#define GPIO_NR_PALMLD_USB_POWER 118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS PXA_CS2_PHYS
+#define PALMLD_USB_VIRT 0xf0000000
+#define PALMLD_USB_SIZE 0x00100000
+
+#define PALMLD_IDE_PHYS 0x20000000
+#define PALMLD_IDE_VIRT 0xf1000000
+#define PALMLD_IDE_SIZE 0x00100000
+
+#define PALMLD_PHYS_IO_START 0x40000000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY 0xFE
+#define PALMLD_DEFAULT_INTENSITY 0x7E
+#define PALMLD_LIMIT_MASK 0x7F
+#define PALMLD_PRESCALER 0x3F
+#define PALMLD_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
new file mode 100644
index 0000000..94db288
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -0,0 +1,84 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors: Ales Snuparek <snuparek@atlas.cz>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET 1
+
+#define GPIO_NR_PALMT5_POWER_DETECT 90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N 14
+#define GPIO_NR_PALMT5_SD_POWER 114
+#define GPIO_NR_PALMT5_SD_READONLY 115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N 15
+#define GPIO_NR_PALMT5_USB_POWER 95
+#define GPIO_NR_PALMT5_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER 84
+#define GPIO_NR_PALMT5_LCD_POWER 96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER 17
+#define GPIO_NR_PALMT5_BT_RESET 83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMT5_PHYS_RAM_START 0xa0000000
+#define PALMT5_PHYS_IO_START 0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY 0xFE
+#define PALMT5_DEFAULT_INTENSITY 0x7E
+#define PALMT5_LIMIT_MASK 0x7F
+#define PALMT5_PRESCALER 0x3F
+#define PALMT5_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 8334246..a6eeef8 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,3 +27,13 @@
extern void pxa_cpu_resume(void);
extern int pxa_pm_enter(suspend_state_t state);
+
+/* NOTE: this is for PM debugging on Lubbock, it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
deleted file mode 100644
index 31d615a..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
-#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
-#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
-#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
-
-
-
-/*
- * DMA Controller
- */
-#define DCSR(x) __REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-#endif
-
-#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
-#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-
-#define DRCMR(n) (*(((n) < 64) ? \
- &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
- &__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-
-#define DDADR(x) __REG2(0x40000200, (x) << 4)
-#define DSADR(x) __REG2(0x40000204, (x) << 4)
-#define DTADR(x) __REG2(0x40000208, (x) << 4)
-#define DCMD(x) __REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
-#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * Real Time Clock
- */
-
-#define RCNR __REG(0x40900000) /* RTC Count Register */
-#define RTAR __REG(0x40900004) /* RTC Alarm Register */
-#define RTSR __REG(0x40900008) /* RTC Status Register */
-#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
-#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
-#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
-#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
-#define RTSR_AL (1 << 0) /* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3 (1 << 3) /* Match status channel 3 */
-#define OSSR_M2 (1 << 2) /* Match status channel 2 */
-#define OSSR_M1 (1 << 1) /* Match status channel 1 */
-#define OSSR_M0 (1 << 0) /* Match status channel 0 */
-
-#define OWER_WME (1 << 0) /* Watchdog Match Enable */
-
-#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
-#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
-#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
-#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
- ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
new file mode 100644
index 0000000..508c3ba
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
new file mode 100644
index 0000000..6876e16
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -0,0 +1,19 @@
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index d83393e..1209c44 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -3,6 +3,8 @@
#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+#include <mach/gpio.h>
+
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 77102d6..4fcddd9 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -14,6 +14,19 @@
#ifndef __PXA2XX_REGS_H
#define __PXA2XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
/*
* Memory controller
*/
@@ -69,24 +82,6 @@
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
-#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
-#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
-#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
-#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-
-#endif
-
-
/*
* Power Manager
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h
new file mode 100644
index 0000000..2f33076
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa300.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h
new file mode 100644
index 0000000..cab78e9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa320.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#endif /* __MACH_PXA320_H */
+
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index bcf3fb2..7d1a059 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -13,6 +13,17 @@
#ifndef __ASM_ARCH_PXA3XX_REGS_H
#define __ASM_ARCH_PXA3XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * Static Chip Selects
+ */
+
+#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS (0x10000000)
+#define PXA3xx_CS3_PHYS (0x14000000)
+
/*
* Oscillator Configuration Register (OSCC)
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h
new file mode 100644
index 0000000..d45f76a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa930.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
new file mode 100644
index 0000000..ad23e74
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 0000000..a3e5f86
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h
new file mode 100644
index 0000000..f0e4a58
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index cf31986..8152be6 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -37,7 +37,6 @@
#if defined(CONFIG_PXA25x)
#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 0f381e6..0a587c4 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -13,7 +13,6 @@
#include <asm/proc-fns.h>
#include "hardware.h"
#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fa69c3a..f6e0300 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -20,7 +20,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
+#include <mach/regs-intc.h>
#include "generic.h"
@@ -51,6 +52,72 @@
.unmask = pxa_unmask_irq,
};
+/*
+ * GPIO IRQs for GPIO 0 and 1
+ */
+static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type)
+{
+ int gpio = irq - IRQ_GPIO0;
+
+ if (__gpio_is_occupied(gpio)) {
+ pr_err("%s failed: GPIO is configured\n", __func__);
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GRER0 |= GPIO_bit(gpio);
+ else
+ GRER0 &= ~GPIO_bit(gpio);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GFER0 |= GPIO_bit(gpio);
+ else
+ GFER0 &= ~GPIO_bit(gpio);
+
+ return 0;
+}
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+ GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+ ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+ ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+ .name = "GPIO-l",
+ .ack = pxa_ack_low_gpio,
+ .mask = pxa_mask_low_gpio,
+ .unmask = pxa_unmask_low_gpio,
+ .set_type = pxa_set_low_gpio_type,
+};
+
+static void __init pxa_init_low_gpio_irq(set_wake_t fn)
+{
+ int irq;
+
+ /* clear edge detection on GPIO 0 and 1 */
+ GFER0 &= ~0x3;
+ GRER0 &= ~0x3;
+ GEDR0 = 0x3;
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+ set_irq_chip(irq, &pxa_low_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ pxa_low_gpio_chip.set_wake = fn;
+}
+
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
int irq;
@@ -72,6 +139,7 @@
}
pxa_internal_irq_chip.set_wake = fn;
+ pxa_init_low_gpio_irq(fn);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 18b20d4..8b9c171 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -18,7 +18,7 @@
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 1a25802..e26d5ef 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -16,7 +16,7 @@
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/lubbock.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 95e06b8..db4af5e 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -16,7 +16,7 @@
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 31da7f3..e13f6a8 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -39,8 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index de3f67d..d64395f 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,9 +38,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index bff7043..f04c833 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,15 +41,15 @@
#include <asm/hardware/sa1111.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
+#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
+#include <mach/pm.h>
#include "generic.h"
#include "clock.h"
@@ -113,8 +113,14 @@
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
+#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+void lubbock_set_hexled(uint32_t value)
+{
+ LUB_HEXLED = value;
+}
+
void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long flags;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 21b821e..d46b367 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,14 +25,14 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
+#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
@@ -66,6 +66,11 @@
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
+ /* SSP 1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+
/* SSP 2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
@@ -148,22 +153,31 @@
* GPIO Keys
*/
+#define INIT_KEY(_code, _gpio, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
static struct gpio_keys_button magician_button_table[] = {
- {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"},
- {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"},
- {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"},
- {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"},
- {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"},
- {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"},
- {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"},
- {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"},
- {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"},
- {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"},
- {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"},
- {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"},
- {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
- {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"},
- {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"},
+ INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
+ INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
+ INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
+ INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
+ INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
+ INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
+ INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
+ INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
+ INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
+ INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
+ INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
+ INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
+ INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+ INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
+ INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
};
static struct gpio_keys_platform_data gpio_keys_data = {
@@ -189,7 +203,7 @@
static struct resource egpio_resources[] = {
[0] = {
.start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -420,7 +434,7 @@
},
{
.name = "magician::phone_bl",
- .default_trigger = "none",
+ .default_trigger = "backlight",
.gpio = GPIO103_MAGICIAN_LED_KP,
},
};
@@ -468,8 +482,6 @@
},
};
-static struct platform_device pasic3;
-
static struct pasic3_leds_machinfo pasic3_leds_info = {
.num_leds = ARRAY_SIZE(pasic3_leds),
.power_gpio = EGPIO_MAGICIAN_LED_POWER,
@@ -511,6 +523,31 @@
};
/*
+ * USB "Transceiver"
+ */
+
+static struct resource gpio_vbus_resource = {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+/*
* External power
*/
@@ -586,15 +623,17 @@
static struct resource power_supply_resources[] = {
[0] = {
.name = "ac",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
.name = "usb",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
@@ -688,11 +727,9 @@
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
-#define PXA_CS_SIZE 0x04000000
-
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
@@ -720,6 +757,7 @@
&egpio,
&backlight,
&pasic3,
+ &gpio_vbus,
&power_supply,
&strataflash,
&leds_gpio,
@@ -743,6 +781,7 @@
gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
pxa_set_ficp_info(&magician_ficp_info);
}
+ pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5f22496..a6c8429 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -41,9 +41,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 33626de..7ffb91d 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,15 +18,12 @@
#include <linux/init.h>
#include <linux/sysdev.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include "generic.h"
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
#define PGSR(x) __REG2(0x40F00020, (x) << 2)
#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
#define GAFR_L(x) __GAFR(0, x)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2b427e0..e77c95c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -39,10 +39,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 8a73814..a65713c 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -19,10 +19,10 @@
#include <linux/types.h>
#include <linux/usb/isp116x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa25x.h>
#include "generic.h"
static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
new file mode 100644
index 0000000..8587477
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld.c
@@ -0,0 +1,565 @@
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO116_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO108_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* GPIO KEYS */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power switch */
+ GPIO15_GPIO, /* lock switch */
+
+ /* LEDs */
+ GPIO52_GPIO, /* green led */
+ GPIO94_GPIO, /* orange led */
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* wifi power */
+ GPIO38_GPIO, /* wifi ready */
+ GPIO81_GPIO, /* wifi reset */
+
+ /* HDD */
+ GPIO95_GPIO, /* HDD irq */
+ GPIO115_GPIO, /* HDD power */
+
+ /* MISC */
+ GPIO13_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
+ palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmld_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+}
+
+static void palmld_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmld_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmld_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmld_mci_power,
+ .get_ro = palmld_mci_get_ro,
+ .init = palmld_mci_init,
+ .exit = palmld_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmld_matrix_keys[] = {
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_UP),
+
+ KEY(1, 0, KEY_F3),
+ KEY(1, 1, KEY_F4),
+ KEY(1, 2, KEY_RIGHT),
+
+ KEY(2, 0, KEY_F1),
+ KEY(2, 1, KEY_F5),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_F6),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmld_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+ {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+ {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+ .buttons = palmld_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmld_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmld_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmld_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmld_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMLD_MAX_INTENSITY,
+ .dft_brightness = PALMLD_MAX_INTENSITY,
+ .pwm_period_ns = PALMLD_PERIOD_NS,
+ .init = palmld_backlight_init,
+ .notify = palmld_backlight_notify,
+ .exit = palmld_backlight_exit,
+};
+
+static struct platform_device palmld_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmld_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmld_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmld_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+}
+
+static void palmld_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmld_ficp_platform_data = {
+ .startup = palmld_irda_startup,
+ .shutdown = palmld_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmld_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+struct gpio_led gpio_leds[] = {
+{
+ .name = "palmld:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_GREEN,
+}, {
+ .name = "palmld:amber:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
+ if (ret)
+ goto err3;
+
+ return 0;
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+err2:
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmld_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static int palmld_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static char *palmld_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmld_is_ac_online,
+ .is_usb_online = palmld_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmld_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmld_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMLD_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMLD_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmld_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmld_lcd_screen = {
+ .modes = palmld_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmld_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmld_pxa_keys,
+#endif
+ &palmld_backlight,
+ &palmld_leds,
+ &power_supply,
+};
+
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+ .virtual = PALMLD_IDE_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_IDE_PHYS),
+ .length = PALMLD_IDE_SIZE,
+ .type = MT_DEVICE
+},
+{
+ .virtual = PALMLD_USB_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_USB_PHYS),
+ .length = PALMLD_USB_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+
+ set_pxa_fb_info(&palmld_lcd_screen);
+ pxa_set_mci_info(&palmld_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmld_ficp_platform_data);
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+ .phys_io = PALMLD_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = palmld_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmld_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
new file mode 100644
index 0000000..9521c7b
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -0,0 +1,496 @@
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Ales Snuparek <snuparek@atlas.cz>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmt5.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO40_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* MISC */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO90_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
+ palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmt5_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+ free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+}
+
+static void palmt5_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmt5_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmt5_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmt5_mci_power,
+ .get_ro = palmt5_mci_get_ro,
+ .init = palmt5_mci_init,
+ .exit = palmt5_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmt5_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmt5_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+ .buttons = palmt5_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmt5_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmt5_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmt5_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmt5_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMT5_MAX_INTENSITY,
+ .dft_brightness = PALMT5_MAX_INTENSITY,
+ .pwm_period_ns = PALMT5_PERIOD_NS,
+ .init = palmt5_backlight_init,
+ .notify = palmt5_backlight_notify,
+ .exit = palmt5_backlight_exit,
+};
+
+static struct platform_device palmt5_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmt5_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmt5_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmt5_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+}
+
+static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmt5_ficp_platform_data = {
+ .startup = palmt5_irda_startup,
+ .shutdown = palmt5_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmt5_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup_inverted = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmt5_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static char *palmt5_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmt5_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmt5_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmt5_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMT5_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMT5_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmt5_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmt5_lcd_screen = {
+ .modes = palmt5_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmt5_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmt5_pxa_keys,
+#endif
+ &palmt5_backlight,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmt5_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ }
+}
+
+static void __init palmt5_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+
+ set_pxa_fb_info(&palmt5_lcd_screen);
+ pxa_set_mci_info(&palmt5_mci_platform_data);
+ palmt5_udc_init();
+ pxa_set_udc_info(&palmt5_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmt5_ficp_platform_data);
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+ .phys_io = PALMT5_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmt5_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index a9d94f5..b490c09 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -32,12 +32,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 2f730da..b88eb4d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,13 +33,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 36135a0..6abfa29 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,10 +29,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 34841c7..f46698e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -31,13 +31,12 @@
#include <mach/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pcm990_baseboard.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 164eb0b..884b174 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,15 +14,8 @@
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/errno.h>
-#include <linux/time.h>
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
-#include <mach/lubbock.h>
-#include <asm/mach/time.h>
struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
static unsigned long *sleep_save;
@@ -57,9 +50,9 @@
/* if invalid, display message and wait for a hardware reset */
if (checksum != sleep_save_checksum) {
-#ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
-#endif
+
+ lubbock_set_hexled(0xbadbadc5);
+
while (1)
pxa_cpu_pm_fns->enter(state);
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f9093be..572ddec 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -36,9 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 3ca7ffc..fcdd374 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,6 @@
#include <linux/pwm.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
/* PWM registers and bits definitions */
#define PWMCR (0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6c57522..77c2693 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,9 +25,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
@@ -310,14 +309,14 @@
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(85, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(90, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
@@ -355,7 +354,7 @@
clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
- if ((ret = pxa_init_dma(16)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
pxa25x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 411bec5..a425ec7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,9 +21,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/gpio.h>
+#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
#include <mach/pm.h>
@@ -332,7 +331,7 @@
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(121, pxa27x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
/*
@@ -381,7 +380,7 @@
clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa27x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 73d04d8..2f3394f 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,7 +16,6 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 83fb609..37bb12d 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 36f0661..e708f4e 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4908938..b02d454 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -23,6 +23,7 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
+#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -538,7 +539,7 @@
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
- pxa_init_gpio(128, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
@@ -594,7 +595,7 @@
clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa3xx_init_pm();
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 13e6bfd..f15dfa5 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,7 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/mfp-pxa930.h>
+#include <mach/pxa930.h>
static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 00b2dc2..867c95c 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,7 +10,7 @@
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#include <mach/reset.h>
unsigned int reset_status;
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 5d02a73..ff82399 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -25,11 +25,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/i2c.h>
-#include <mach/regs-lcd.h>
#include <mach/pxafb.h>
#include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index f0845c1..16b4ec6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/sharpsl.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index a62c837..2ed95f3 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -15,7 +15,6 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6d447c9..f697c49 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -44,9 +44,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 072e77c..2e44905 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,7 +24,6 @@
#include <mach/sharpsl.h>
#include <mach/spitz.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 6f42004..965e38c 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -33,7 +33,6 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index f3821cf..29f5f5c 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -13,7 +13,6 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
.text
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 58ef08a..b75353a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -22,9 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/pxafb.h>
#include <mach/pxa27x_keypad.h>
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 95656a7..8eb3830 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,8 +22,7 @@
#include <asm/div64.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
/*
* This is PXA's sched_clock implementation. This has a resolution
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3332e5d..66b1380 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -36,8 +36,8 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index a72e3ad..f79c9cb 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -39,10 +39,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 4b3120d..0e65344 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -42,12 +42,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/bitfield.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/viper.h>
@@ -956,7 +953,7 @@
},
{
.virtual = VIPER_PC104IO_BASE,
- .pfn = __phys_to_pfn(_PCMCIA1IO),
+ .pfn = __phys_to_pfn(0x30000000),
.length = 0x00800000,
.type = MT_DEVICE,
},
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 4653888..c1f7320 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
-#include <asm/gpio.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/i2c.h>
#include <mach/zylonite.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 28e4e62..4e1c488 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ad91185..b6ec106 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -35,6 +35,7 @@
bool "Support RealView/PB11MPCore platform"
select CPU_V6
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
PB11MPCore is a platform with an on-board ARM11MPCore and has
@@ -51,6 +52,7 @@
bool "Support RealView/PB-A8 platform"
select CPU_V7
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
PB-A8 is a platform with an on-board Cortex-A8 and has support for
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index bd2aa4f..d676668 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,6 +29,7 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/smc911x.h>
+#include <linux/ata_platform.h>
#include <asm/clkdev.h>
#include <asm/system.h>
@@ -150,6 +151,44 @@
return platform_device_register(&realview_eth_device);
}
+struct platform_device realview_usb_device = {
+ .name = "isp1760",
+ .num_resources = 2,
+};
+
+int realview_usb_register(struct resource *res)
+{
+ realview_usb_device.resource = res;
+ return platform_device_register(&realview_usb_device);
+}
+
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1,
+};
+
+static struct resource pata_resources[] = {
+ [0] = {
+ .start = REALVIEW_CF_BASE,
+ .end = REALVIEW_CF_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_CF_BASE + 0x100,
+ .end = REALVIEW_CF_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device realview_cf_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pata_resources),
+ .resource = pata_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ },
+};
+
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -158,11 +197,25 @@
struct platform_device realview_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &realview_i2c_resource,
};
+static struct i2c_board_info realview_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init realview_i2c_init(void)
+{
+ return i2c_register_board_info(0, realview_i2c_board_info,
+ ARRAY_SIZE(realview_i2c_board_info));
+}
+arch_initcall(realview_i2c_init);
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 44269b1..21c0863 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -45,6 +45,7 @@
}
extern struct platform_device realview_flash_device;
+extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
@@ -62,5 +63,6 @@
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
+extern int realview_usb_register(struct resource *res);
#endif
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index c8bed8f..307f97b 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -45,8 +45,6 @@
#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
-#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */
-#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 793a3a3..c8f5083 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -204,6 +204,12 @@
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
/*
+ * CompactFlash
+ */
+#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */
+#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */
+
+/*
* Disk on Chip
*/
#define REALVIEW_DOC_BASE 0x2C000000
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index bed39ed..c20fbef 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -264,6 +264,19 @@
return realview_eth_register(name, realview_eb_eth_resources);
}
+static struct resource realview_eb_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_EB_USB_BASE,
+ .end = REALVIEW_EB_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EB_USB,
+ .end = IRQ_EB_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -323,6 +336,8 @@
/* platform devices */
realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
+ realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB;
+ realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB;
}
static void __init realview_eb_timer_init(void)
@@ -366,6 +381,7 @@
realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
eth_device_register();
+ realview_usb_register(realview_eb_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 8f0683c..a64b84a 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -222,6 +222,19 @@
},
};
+static struct resource realview_pb1176_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_PB1176_USB_BASE,
+ .end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PB1176_USB,
+ .end = IRQ_PB1176_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
@@ -260,6 +273,8 @@
realview_flash_register(&realview_pb1176_flash_resource, 1);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ realview_usb_register(realview_pb1176_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3ebdb2d..ea1e60e 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,31 +230,19 @@
},
};
-struct resource realview_pb11mp_cf_resources[] = {
+static struct resource realview_pb11mp_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PB11MP_CF_BASE,
- .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PB11MP_USB_BASE,
+ .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PB11MP_CF_MEM_BASE,
- .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_TC11MP_USB,
+ .end = IRQ_TC11MP_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pb11mp_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources),
- .resource = realview_pb11mp_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
unsigned int pldctrl;
@@ -308,7 +296,8 @@
ARRAY_SIZE(realview_pb11mp_flash_resource));
realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pb11mp_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pb11mp_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 34c9443..d6ac1eb 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -221,31 +221,19 @@
},
};
-struct resource realview_pba8_cf_resources[] = {
+static struct resource realview_pba8_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PBA8_CF_BASE,
- .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PBA8_USB_BASE,
+ .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PBA8_CF_MEM_BASE,
- .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_PBA8_USB,
+ .end = IRQ_PBA8_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pba8_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pba8_cf_resources),
- .resource = realview_pba8_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
@@ -276,7 +264,8 @@
ARRAY_SIZE(realview_pba8_flash_resource));
realview_eth_register(NULL, realview_pba8_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pba8_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pba8_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 7958a30..c47d974 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -26,6 +26,16 @@
#include <asm/mach/dma.h>
#include <asm/hardware/iomd.h>
+struct iomd_dma {
+ struct dma_struct dma;
+ unsigned int state;
+ unsigned long base; /* Controller base address */
+ int irq; /* Controller IRQ */
+ struct scatterlist cur_sg; /* Current controller buffer */
+ dma_addr_t dma_addr;
+ unsigned int dma_len;
+};
+
#if 0
typedef enum {
dma_size_8 = 1,
@@ -44,15 +54,15 @@
#define CR (IOMD_IO0CR - IOMD_IO0CURA)
#define ST (IOMD_IO0ST - IOMD_IO0CURA)
-static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
+static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
{
unsigned long end, offset, flags = 0;
- if (dma->sg) {
- sg->dma_address = dma->sg->dma_address;
+ if (idma->dma.sg) {
+ sg->dma_address = idma->dma_addr;
offset = sg->dma_address & ~PAGE_MASK;
- end = offset + dma->sg->length;
+ end = offset + idma->dma_len;
if (end > PAGE_SIZE)
end = PAGE_SIZE;
@@ -62,15 +72,17 @@
sg->length = end - TRANSFER_SIZE;
- dma->sg->length -= end - offset;
- dma->sg->dma_address += end - offset;
+ idma->dma_len -= end - offset;
+ idma->dma_addr += end - offset;
- if (dma->sg->length == 0) {
- if (dma->sgcount > 1) {
- dma->sg++;
- dma->sgcount--;
+ if (idma->dma_len == 0) {
+ if (idma->dma.sgcount > 1) {
+ idma->dma.sg = sg_next(idma->dma.sg);
+ idma->dma_addr = idma->dma.sg->dma_address;
+ idma->dma_len = idma->dma.sg->length;
+ idma->dma.sgcount--;
} else {
- dma->sg = NULL;
+ idma->dma.sg = NULL;
flags |= DMA_END_S;
}
}
@@ -85,8 +97,8 @@
static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
{
- dma_t *dma = (dma_t *)dev_id;
- unsigned long base = dma->dma_base;
+ struct iomd_dma *idma = dev_id;
+ unsigned long base = idma->base;
do {
unsigned int status;
@@ -95,93 +107,99 @@
if (!(status & DMA_ST_INT))
return IRQ_HANDLED;
- if ((dma->state ^ status) & DMA_ST_AB)
- iomd_get_next_sg(&dma->cur_sg, dma);
+ if ((idma->state ^ status) & DMA_ST_AB)
+ iomd_get_next_sg(&idma->cur_sg, idma);
switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
case DMA_ST_OFL: /* OIA */
case DMA_ST_AB: /* .IB */
- iomd_writel(dma->cur_sg.dma_address, base + CURA);
- iomd_writel(dma->cur_sg.length, base + ENDA);
- dma->state = DMA_ST_AB;
+ iomd_writel(idma->cur_sg.dma_address, base + CURA);
+ iomd_writel(idma->cur_sg.length, base + ENDA);
+ idma->state = DMA_ST_AB;
break;
case DMA_ST_OFL | DMA_ST_AB: /* OIB */
case 0: /* .IA */
- iomd_writel(dma->cur_sg.dma_address, base + CURB);
- iomd_writel(dma->cur_sg.length, base + ENDB);
- dma->state = 0;
+ iomd_writel(idma->cur_sg.dma_address, base + CURB);
+ iomd_writel(idma->cur_sg.length, base + ENDB);
+ idma->state = 0;
break;
}
if (status & DMA_ST_OFL &&
- dma->cur_sg.length == (DMA_END_S|DMA_END_L))
+ idma->cur_sg.length == (DMA_END_S|DMA_END_L))
break;
} while (1);
- dma->state = ~DMA_ST_AB;
+ idma->state = ~DMA_ST_AB;
disable_irq(irq);
return IRQ_HANDLED;
}
-static int iomd_request_dma(dmach_t channel, dma_t *dma)
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
{
- return request_irq(dma->dma_irq, iomd_dma_handle,
- IRQF_DISABLED, dma->device_id, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ return request_irq(idma->irq, iomd_dma_handle,
+ IRQF_DISABLED, idma->dma.device_id, idma);
}
-static void iomd_free_dma(dmach_t channel, dma_t *dma)
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
{
- free_irq(dma->dma_irq, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ free_irq(idma->irq, idma);
}
-static void iomd_enable_dma(dmach_t channel, dma_t *dma)
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
- if (dma->invalid) {
- dma->invalid = 0;
+ if (idma->dma.invalid) {
+ idma->dma.invalid = 0;
/*
* Cope with ISA-style drivers which expect cache
* coherence.
*/
- if (!dma->sg) {
- dma->sg = &dma->buf;
- dma->sgcount = 1;
- dma->buf.length = dma->count;
- dma->buf.dma_address = dma_map_single(NULL,
- dma->addr, dma->count,
- dma->dma_mode == DMA_MODE_READ ?
+ if (!idma->dma.sg) {
+ idma->dma.sg = &idma->dma.buf;
+ idma->dma.sgcount = 1;
+ idma->dma.buf.length = idma->dma.count;
+ idma->dma.buf.dma_address = dma_map_single(NULL,
+ idma->dma.addr, idma->dma.count,
+ idma->dma.dma_mode == DMA_MODE_READ ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
iomd_writeb(DMA_CR_C, dma_base + CR);
- dma->state = DMA_ST_AB;
+ idma->state = DMA_ST_AB;
}
-
- if (dma->dma_mode == DMA_MODE_READ)
+
+ if (idma->dma.dma_mode == DMA_MODE_READ)
ctrl |= DMA_CR_D;
iomd_writeb(ctrl, dma_base + CR);
- enable_irq(dma->dma_irq);
+ enable_irq(idma->irq);
}
-static void iomd_disable_dma(dmach_t channel, dma_t *dma)
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned long flags;
local_irq_save(flags);
- if (dma->state != ~DMA_ST_AB)
- disable_irq(dma->dma_irq);
+ if (idma->state != ~DMA_ST_AB)
+ disable_irq(idma->irq);
iomd_writeb(0, dma_base + CR);
local_irq_restore(flags);
}
-static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
{
int tcr, speed;
@@ -197,7 +215,7 @@
tcr = iomd_readb(IOMD_DMATCR);
speed &= 3;
- switch (channel) {
+ switch (chan) {
case DMA_0:
tcr = (tcr & ~0x03) | speed;
break;
@@ -236,16 +254,22 @@
.name = "floppydma"
};
-static void floppy_enable_dma(dmach_t channel, dma_t *dma)
+struct floppy_dma {
+ struct dma_struct dma;
+ unsigned int fiq;
+};
+
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
{
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
void *fiqhandler_start;
unsigned int fiqhandler_length;
struct pt_regs regs;
- if (dma->sg)
+ if (fdma->dma.sg)
BUG();
- if (dma->dma_mode == DMA_MODE_READ) {
+ if (fdma->dma.dma_mode == DMA_MODE_READ) {
extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
fiqhandler_start = &floppy_fiqin_start;
fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
@@ -255,8 +279,8 @@
fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
}
- regs.ARM_r9 = dma->count;
- regs.ARM_r10 = (unsigned long)dma->addr;
+ regs.ARM_r9 = fdma->dma.count;
+ regs.ARM_r10 = (unsigned long)fdma->dma.addr;
regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
if (claim_fiq(&fh)) {
@@ -266,16 +290,17 @@
set_fiq_handler(fiqhandler_start, fiqhandler_length);
set_fiq_regs(®s);
- enable_fiq(dma->dma_irq);
+ enable_fiq(fdma->fiq);
}
-static void floppy_disable_dma(dmach_t channel, dma_t *dma)
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
{
- disable_fiq(dma->dma_irq);
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+ disable_fiq(fdma->fiq);
release_fiq(&fh);
}
-static int floppy_get_residue(dmach_t channel, dma_t *dma)
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
{
struct pt_regs regs;
get_fiq_regs(®s);
@@ -292,7 +317,7 @@
/*
* This is virtual DMA - we don't need anything here.
*/
-static void sound_enable_disable_dma(dmach_t channel, dma_t *dma)
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
{
}
@@ -302,8 +327,24 @@
.disable = sound_enable_disable_dma,
};
-void __init arch_dma_init(dma_t *dma)
+static struct iomd_dma iomd_dma[6];
+
+static struct floppy_dma floppy_dma = {
+ .dma = {
+ .d_ops = &floppy_dma_ops,
+ },
+ .fiq = FIQ_FLOPPYDATA,
+};
+
+static dma_t sound_dma = {
+ .d_ops = &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
{
+ unsigned int i;
+ int ret;
+
iomd_writeb(0, IOMD_IO0CR);
iomd_writeb(0, IOMD_IO1CR);
iomd_writeb(0, IOMD_IO2CR);
@@ -311,31 +352,39 @@
iomd_writeb(0xa0, IOMD_DMATCR);
- dma[DMA_0].dma_base = IOMD_IO0CURA;
- dma[DMA_0].dma_irq = IRQ_DMA0;
- dma[DMA_0].d_ops = &iomd_dma_ops;
- dma[DMA_1].dma_base = IOMD_IO1CURA;
- dma[DMA_1].dma_irq = IRQ_DMA1;
- dma[DMA_1].d_ops = &iomd_dma_ops;
- dma[DMA_2].dma_base = IOMD_IO2CURA;
- dma[DMA_2].dma_irq = IRQ_DMA2;
- dma[DMA_2].d_ops = &iomd_dma_ops;
- dma[DMA_3].dma_base = IOMD_IO3CURA;
- dma[DMA_3].dma_irq = IRQ_DMA3;
- dma[DMA_3].d_ops = &iomd_dma_ops;
- dma[DMA_S0].dma_base = IOMD_SD0CURA;
- dma[DMA_S0].dma_irq = IRQ_DMAS0;
- dma[DMA_S0].d_ops = &iomd_dma_ops;
- dma[DMA_S1].dma_base = IOMD_SD1CURA;
- dma[DMA_S1].dma_irq = IRQ_DMAS1;
- dma[DMA_S1].d_ops = &iomd_dma_ops;
- dma[DMA_VIRTUAL_FLOPPY].dma_irq = FIQ_FLOPPYDATA;
- dma[DMA_VIRTUAL_FLOPPY].d_ops = &floppy_dma_ops;
- dma[DMA_VIRTUAL_SOUND].d_ops = &sound_dma_ops;
-
/*
* Setup DMA channels 2,3 to be for podules
* and channels 0,1 for internal devices
*/
iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+ iomd_dma[DMA_0].base = IOMD_IO0CURA;
+ iomd_dma[DMA_0].irq = IRQ_DMA0;
+ iomd_dma[DMA_1].base = IOMD_IO1CURA;
+ iomd_dma[DMA_1].irq = IRQ_DMA1;
+ iomd_dma[DMA_2].base = IOMD_IO2CURA;
+ iomd_dma[DMA_2].irq = IRQ_DMA2;
+ iomd_dma[DMA_3].base = IOMD_IO3CURA;
+ iomd_dma[DMA_3].irq = IRQ_DMA3;
+ iomd_dma[DMA_S0].base = IOMD_SD0CURA;
+ iomd_dma[DMA_S0].irq = IRQ_DMAS0;
+ iomd_dma[DMA_S1].base = IOMD_SD1CURA;
+ iomd_dma[DMA_S1].irq = IRQ_DMAS1;
+
+ for (i = DMA_0; i <= DMA_S1; i++) {
+ iomd_dma[i].dma.d_ops = &iomd_dma_ops;
+
+ ret = isa_dma_add(i, &iomd_dma[i].dma);
+ if (ret)
+ printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+ }
+
+ ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
+ if (ret)
+ printk("IOMDFLOPPY: unable to register: %d\n", ret);
+ ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+ if (ret)
+ printk("IOMDSOUND: unable to register: %d\n", ret);
+ return 0;
}
+core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
index bad7205..67bfc67 100644
--- a/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -23,5 +23,7 @@
#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
+#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1)
+
#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index f99d901..bfc38e3 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,19 +71,9 @@
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
-config SA1100_H3800
- bool "Compaq iPAQ H3800"
- help
- Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
- series handheld computer. Information about this machine and the
- Linux port to this machine can be found at:
-
- <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
- <http://www.compaq.com/products/handhelds/pocketpc/>
-
config SA1100_H3XXX
bool
- depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+ depends on SA1100_H3100 || SA1100_H3600
default y
config SA1100_BADGE4
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af25a78..b9aaa45 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -42,14 +42,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/h3600.h>
-
-#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
#include <mach/h3600_gpio.h>
-#endif
-
-#ifdef CONFIG_SA1100_H3800
-#include <mach/h3600_asic.h>
-#endif
#include "generic.h"
@@ -519,388 +512,3 @@
#endif /* CONFIG_SA1100_H3600 */
-#ifdef CONFIG_SA1100_H3800
-
-#define SET_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
-
-#define SET_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
-
-#define CLEAR_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
-
-#define CLEAR_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
-
-
-/*
- On screen enable, we get
-
- h3800_video_power_on(1)
- LCD controller starts
- h3800_video_lcd_enable(1)
-
- On screen disable, we get
-
- h3800_video_lcd_enable(0)
- LCD controller stops
- h3800_video_power_on(0)
-*/
-
-
-static void h3800_video_power_on(int setp)
-{
- if (setp) {
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
- msleep(30);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
- msleep(5);
- } else {
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
- msleep(100);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
- }
-}
-
-static void h3800_video_lcd_enable(int setp)
-{
- if (setp) {
- msleep(17); // Wait one from before turning on
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
- } else {
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
- msleep(30); // Wait before turning off
- }
-}
-
-
-static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- h3800_video_power_on(setp);
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- h3800_video_lcd_enable(setp);
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- case IPAQ_EGPIO_AUDIO_ON:
- case IPAQ_EGPIO_QMUTE:
- printk("%s: error - should not be called\n", __func__);
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- SET_ASIC2(GPIO2_OPT_ON_NVRAM);
- break;
- case IPAQ_EGPIO_OPT_ON:
- SET_ASIC2(GPIO2_OPT_ON);
- break;
- case IPAQ_EGPIO_CARD_RESET:
- SET_ASIC2(GPIO2_OPT_PCM_RESET);
- break;
- case IPAQ_EGPIO_OPT_RESET:
- SET_ASIC2(GPIO2_OPT_RESET);
- break;
- case IPAQ_EGPIO_IR_ON:
- CLEAR_ASIC1(GPIO1_IR_ON_N);
- break;
- case IPAQ_EGPIO_IR_FSEL:
- break;
- case IPAQ_EGPIO_RS232_ON:
- SET_ASIC1(GPIO1_RS232_ON);
- break;
- case IPAQ_EGPIO_VPP_ON:
- H3800_ASIC2_FlashWP_VPP_ON = setp;
- break;
- }
-}
-
-static unsigned long h3800_read_egpio(void)
-{
- return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
-}
-
-/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
- it doesn't appear that ASIC1 GPIO has the same problem */
-
-static int h3800_pm_callback(int req)
-{
- static u16 asic1_data;
- static u16 asic2_data;
- int result = 0;
-
- printk("%s %d\n", __func__, req);
-
- switch (req) {
- case PM_RESUME:
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
-
- H3800_ASIC2_GPIOPIOD = asic2_data;
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- H3800_ASIC1_GPIO_OUT = asic1_data;
-
- if (ipaq_model_ops.pm_callback_aux)
- result = ipaq_model_ops.pm_callback_aux(req);
- break;
-
- case PM_SUSPEND:
- if (ipaq_model_ops.pm_callback_aux &&
- ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
- return result;
-
- asic1_data = H3800_ASIC1_GPIO_OUT;
- asic2_data = H3800_ASIC2_GPIOPIOD;
- break;
- default:
- printk("%s: unrecognized PM callback\n", __func__);
- break;
- }
- return result;
-}
-
-static struct ipaq_model_ops h3800_model_ops __initdata = {
- .generic_name = "3800",
- .control = h3800_control_egpio,
- .read = h3800_read_egpio,
- .pm_callback = h3800_pm_callback
-};
-
-#define MAX_ASIC_ISR_LOOPS 20
-
-/* The order of these is important - see #include <mach/irqs.h> */
-static u32 kpio_irq_mask[] = {
- KPIO_KEY_ALL,
- KPIO_SPI_INT,
- KPIO_OWM_INT,
- KPIO_ADC_INT,
- KPIO_UART_0_INT,
- KPIO_UART_1_INT,
- KPIO_TIMER_0_INT,
- KPIO_TIMER_1_INT,
- KPIO_TIMER_2_INT
-};
-
-static u32 gpio_irq_mask[] = {
- GPIO2_PEN_IRQ,
- GPIO2_SD_DETECT,
- GPIO2_EAR_IN_N,
- GPIO2_USB_DETECT_N,
- GPIO2_SD_CON_SLT,
-};
-
-static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
- int i;
-
- if (0) printk("%s: interrupt received\n", __func__);
-
- desc->chip->ack(irq);
-
- for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
- u32 irq;
- int j;
-
- /* KPIO */
- irq = H3800_ASIC2_KPIINTFLAG;
- if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
- if (irq & kpio_irq_mask[j])
- handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
-
- /* GPIO2 */
- irq = H3800_ASIC2_GPIINTFLAG;
- if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
- if (irq & gpio_irq_mask[j])
- handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
- }
-
- if (i >= MAX_ASIC_ISR_LOOPS)
- printk("%s: interrupt processing overrun\n", __func__);
-
- /* For level-based interrupts */
- desc->chip->unmask(irq);
-
-}
-
-static struct irqaction h3800_irq = {
- .name = "h3800_asic",
- .handler = h3800_IRQ_demux,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-u32 kpio_int_shadow = 0;
-
-
-/* mask_ack <- IRQ is first serviced.
- mask <- IRQ is disabled.
- unmask <- IRQ is enabled
-
- The INTCLR registers are poorly documented. I believe that writing
- a "1" to the register clears the specific interrupt, but the documentation
- indicates writing a "0" clears the interrupt. In any case, they shouldn't
- be read (that's the INTFLAG register)
- */
-
-static void h3800_mask_ack_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
- H3800_ASIC2_KPIINTCLR = mask;
-}
-
-static void h3800_mask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_unmask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow |= mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_mask_ack_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- H3800_ASIC2_GPIINTCLR = mask;
-}
-
-static void h3800_mask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- }
-
-static void h3800_unmask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT |= mask;
-}
-
-static void __init h3800_init_irq(void)
-{
- int i;
-
- /* Initialize standard IRQs */
- sa1100_init_irq();
-
- /* Disable all IRQs and set up clock */
- H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
- H3800_ASIC2_GPIINTSTAT = 0;
-
- H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
- H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
-
-// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
-// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
-
- H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
- H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_TimerSet = 1;
-
-#if 0
- for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_KPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_kpio_irqchip);
- }
-
- for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_GPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_gpio_irqchip);
- }
-#endif
- set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
- set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
-}
-
-
-#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
-
-static void __init h3800_map_io(void)
-{
- h3xxx_map_io();
-
- /* Add wakeup on AC plug/unplug */
- PWER |= PWER_GPIO12;
-
- /* Initialize h3800-specific values here */
- GPCR = 0x0fffffff; /* All outputs are set low by default */
- GAFR = GPIO_H3800_CLK_OUT |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- GPDR = GPIO_H3800_CLK_OUT |
- GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
- GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
-
- /* Fix the memory bus */
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
-
- /* Set up ASIC #1 */
- H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
- H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
- H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
- H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
-
- H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
- | GPIO1_RS232_ON
- | GPIO1_EAR_ON_N;
-
- /* Set up ASIC #2 */
- H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
- H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- /* TODO : Set sleep states & battery fault states */
-
- /* Clear VPP Enable */
- H3800_ASIC2_FlashWP_VPP_ON = 0;
- ipaq_model_ops = h3800_model_ops;
-}
-
-MACHINE_START(H3800, "Compaq iPAQ H3800")
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
- .map_io = h3800_map_io,
- .init_irq = h3800_init_irq,
- .timer = &sa1100_timer,
- .init_machine = h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3800 */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 9cc47fd..e692ab3 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -29,7 +29,7 @@
#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
/* Physical memory regions corresponding to chip selects */
#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b78..a36ca76 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -48,22 +48,11 @@
#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
-
/****************************************************/
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
-
/* H3100 / 3600 EGPIO pins */
#define EGPIO_H3600_VPP_ON (1 << 0)
#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
@@ -84,457 +73,5 @@
#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base 0x0000
-#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
-#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base 0x0200
-#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
-#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base 0x0400
-#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
-
-#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base 0x0600
-#define _H3800_ASIC2_PWM_1_Base 0x0700
-#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base 0x0800
-#define _H3800_ASIC2_LED_1_Base 0x0880
-#define _H3800_ASIC2_LED_2_Base 0x0900
-#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
-#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base 0x0A00
-#define _H3800_ASIC2_UART_1_Base 0x0C00
-#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
-#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
-#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
-
-#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base 0x0E00
-#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
-
-#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base 0x1000
-#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base 0x1200
-#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base 0x1800
-#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base 0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base 0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
-#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
-#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
-#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
-#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
-#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
-#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
-#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base 0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
-#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
-#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
-#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
-#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
-#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
-#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
-#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
-#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
-#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
-#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
-
-#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base 0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 0cb3660..ae81f80 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -153,8 +153,6 @@
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#else
@@ -175,23 +173,3 @@
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
-#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT 9
-
-#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT 5
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 81848aa..fd776bb 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -226,12 +226,22 @@
.id = -1,
};
+static struct platform_device jornada_kbd_device = {
+ .name = "jornada720_kbd",
+ .id = -1,
+};
+
+static struct platform_device jornada_ts_device = {
+ .name = "jornada_ts",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
-#ifdef CONFIG_SA1100_JORNADA720_SSP
&jornada_ssp_device,
-#endif
&s1d13xxxfb_device,
+ &jornada_kbd_device,
+ &jornada_ts_device,
};
static int __init jornada720_init(void)
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a23fd3d..4f3a265 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -16,12 +16,28 @@
#include <asm/leds.h>
#include <asm/param.h>
-#include <mach/hardware.h>
-
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#define IO_BASE 0xe0000000
+#define IO_SIZE 0x08000000
+#define IO_START 0x40000000
+#define ROMCARD_SIZE 0x08000000
+#define ROMCARD_START 0x10000000
+
+void arch_reset(char mode)
+{
+ short temp;
+ local_irq_disable();
+ /* Reset the Machine via pc[3] of the sequoia chipset */
+ outw(0x09,0x24);
+ temp=inw(0x26);
+ temp = temp | (1<<3) | (1<<10);
+ outw(0x09,0x24);
+ outw(temp,0x26);
+}
+
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
@@ -50,14 +66,38 @@
},
};
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0x70,
+ .end = 0x73,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = IRQ_ISA_RTC_ALARM,
+ .end = IRQ_ISA_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
static int __init shark_init(void)
{
int ret;
if (machine_is_shark())
+ {
+ ret = platform_device_register(&rtc_device);
+ if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
ret = platform_device_register(&serial_device);
-
- return ret;
+ if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
+ }
+ return 0;
}
arch_initcall(shark_init);
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
index 6774b8d..10b5b8b 100644
--- a/arch/arm/mach-shark/dma.c
+++ b/arch/arm/mach-shark/dma.c
@@ -13,9 +13,11 @@
#include <asm/dma.h>
#include <asm/mach/dma.h>
-void __init arch_dma_init(dma_t *dma)
+static int __init shark_dma_init(void)
{
#ifdef CONFIG_ISA_DMA
- isa_init_dma(dma);
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 0836cb7..f97a762 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -27,5 +27,3 @@
bne 1001b
.endm
- .macro waituart,rd,rx
- .endm
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
new file mode 100644
index 0000000..84a5bf6
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/framebuffer.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-shark/include/mach/framebuffer.h
+ *
+ * by Alexander Schulz
+ *
+ */
+
+#ifndef __ASM_ARCH_FRAMEBUFFER_H
+#define __ASM_ARCH_FRAMEBUFFER_H
+
+/* defines for the Framebuffer */
+#define FB_START 0x06000000
+#define FB_SIZE 0x01000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index 01bf760..94d84b2 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -10,35 +10,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE 0xe0000000
-
-#else
-
-#define IO_BASE 0
-
-#endif
-
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
#define UNCACHEABLE_ADDR 0xdf010000
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
-
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x6000
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index c5cee82..9ccbcec 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -11,10 +11,10 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define PCIO_BASE 0xe0000000
-#define IO_SPACE_LIMIT 0xffffffff
+#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(addr) (addr)
+#define __io(a) ((void __iomem *)(0xe0000000 + (a)))
+
+#define __mem_pci(addr) (addr)
#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
index 0586acd..c8e8a4e 100644
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -7,7 +7,7 @@
#define NR_IRQS 16
#define IRQ_ISA_KEYBOARD 1
-#define RTC_IRQ 8
+#define IRQ_ISA_RTC_ALARM 8
#define I8042_KBD_IRQ 1
#define I8042_AUX_IRQ 12
#define IRQ_HARDDISK 14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
index 864298f..96c43b8 100644
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ b/arch/arm/mach-shark/include/mach/isa-dma.h
@@ -6,10 +6,6 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev / .properties
- * in OpenFirmware.
- */
#define MAX_DMA_CHANNELS 8
#define DMA_ISA_CASCADE 4
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index c5ab038..3053e5b 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -23,6 +23,7 @@
{
if (node != 0) return;
/* Only the first 4 MB (=1024 Pages) are usable for DMA */
+ /* See dev / -> .properties in OpenFirmware. */
zone_size[1] = zone_size[0] - 1024;
zone_size[0] = 1024;
zhole_size[1] = zhole_size[0];
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index e45bd73..0752ca2 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,20 +6,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-
-static void arch_reset(char mode)
-{
- short temp;
- local_irq_disable();
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-
-}
+/* Found in arch/mach-shark/core.c */
+extern void arch_reset(char mode);
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 3725e16..22ccab4 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -11,7 +11,7 @@
static inline void putc(int c)
{
- int t;
+ volatile int t;
SERIAL_BASE[0] = c;
t=0x10000;
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 8bd8d6b..c9e32de 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -22,12 +22,16 @@
#include <linux/ioport.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
+
+#define SEQUOIA_LED_GREEN (1<<6)
+#define SEQUOIA_LED_AMBER (1<<5)
+#define SEQUOIA_LED_BACK (1<<7)
+
static char led_state;
static short hw_led_state;
static short saved_state;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1c43494..5657766 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -335,11 +335,25 @@
static struct platform_device versatile_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &versatile_i2c_resource,
};
+static struct i2c_board_info versatile_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init versatile_i2c_init(void)
+{
+ return i2c_register_board_info(0, versatile_i2c_board_info,
+ ARRAY_SIZE(versatile_i2c_board_info));
+}
+arch_initcall(versatile_i2c_init);
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 40ff408..de29ddc 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -43,35 +43,16 @@
extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
extern void w90p910_init_clocks(int xtal);
extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct platform_device w90p910_serial_device;
extern struct sys_timer w90x900_timer;
-#define W90X900_RES(name) \
-struct resource w90x900_##name##_resource[] = { \
- [0] = { \
- .start = name##_PA, \
- .end = name##_PA + 0x0ff, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_##name, \
- .end = IRQ_##name, \
- .flags = IORESOURCE_IRQ, \
- } \
-}
-
-#define W90X900_DEVICE(devname, regname, devid, platdevname) \
-struct platform_device w90x900_##devname = { \
- .name = platdevname, \
- .id = devid, \
- .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \
- .resource = w90x900_##regname##_resource, \
-}
-
-#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \
-{ \
- .hwport = port, \
- .flags = flag, \
- .ucon = uc, \
- .ulcon = ulc, \
- .ufcon = ufc, \
+#define W90X900_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 11313600, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9ebc93f..726ff67 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -22,6 +22,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,28 +33,67 @@
#include <mach/map.h>
#include "cpu.h"
+/*w90p910 evb norflash driver data */
-static struct map_desc w90p910_iodesc[] __initdata = {
+#define W90P910_FLASH_BASE 0xA0000000
+#define W90P910_FLASH_SIZE 0x400000
+
+static struct mtd_partition w90p910_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
};
-static struct w90x900_uartcfg w90p910_uartcfgs[] = {
- W90X900_UARTCFG(0, 0, 0, 0, 0),
- W90X900_UARTCFG(1, 0, 0, 0, 0),
- W90X900_UARTCFG(2, 0, 0, 0, 0),
- W90X900_UARTCFG(3, 0, 0, 0, 0),
- W90X900_UARTCFG(4, 0, 0, 0, 0),
+static struct physmap_flash_data w90p910_flash_data = {
+ .width = 2,
+ .parts = w90p910_flash_partitions,
+ .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
+};
+
+static struct resource w90p910_flash_resources[] = {
+ {
+ .start = W90P910_FLASH_BASE,
+ .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device w90p910_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &w90p910_flash_data,
+ },
+ .resource = w90p910_flash_resources,
+ .num_resources = ARRAY_SIZE(w90p910_flash_resources),
+};
+
+static struct map_desc w90p910_iodesc[] __initdata = {
};
/*Here should be your evb resourse,such as LCD*/
static struct platform_device *w90p910evb_dev[] __initdata = {
+ &w90p910_serial_device,
+ &w90p910_flash_device,
};
static void __init w90p910evb_map_io(void)
{
w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
w90p910_init_clocks(0);
- w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
}
static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index aa783bc..2bcbaa6 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/serial_8250.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -36,12 +37,6 @@
#include "cpu.h"
-/*W90P910 has five uarts*/
-
-#define MAX_UART_COUNT 5
-static int uart_count;
-static struct platform_device *uart_devs[MAX_UART_COUNT-1];
-
/* Initial IO mappings */
static struct map_desc w90p910_iodesc[] __initdata = {
@@ -53,48 +48,19 @@
/*IODESC_ENT(LCD),*/
};
-/*Init the dev resource*/
+/* Initial serial platform data */
-static W90X900_RES(UART0);
-static W90X900_RES(UART1);
-static W90X900_RES(UART2);
-static W90X900_RES(UART3);
-static W90X900_RES(UART4);
-static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
-static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
-static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
-static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
-static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
-
-static struct platform_device *uart_devices[] __initdata = {
- &w90x900_uart0,
- &w90x900_uart1,
- &w90x900_uart2,
- &w90x900_uart3,
- &w90x900_uart4
+struct plat_serial8250_port w90p910_uart_data[] = {
+ W90X900_8250PORT(UART0),
};
-/*Init W90P910 uart device*/
-
-void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
-{
- struct platform_device *platdev;
- int uart, uartdev;
-
- /*By min() to judge count of uart be used indeed*/
-
- uartdev = ARRAY_SIZE(uart_devices);
- no = min(uartdev, no);
-
- for (uart = 0; uart < no; uart++, cfg++) {
- if (cfg->hwport != uart)
- printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
- platdev = uart_devices[cfg->hwport];
- uart_devs[uart] = platdev;
- platdev->dev.platform_data = cfg;
- }
- uart_count = uart;
-}
+struct platform_device w90p910_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = w90p910_uart_data,
+ },
+};
/*Init W90P910 evb io*/
@@ -122,13 +88,6 @@
static int __init w90x900_arch_init(void)
{
- int ret;
-
- ret = w90p910_init_cpu();
- if (ret != 0)
- return ret;
-
- return platform_add_devices(uart_devs, uart_count);
-
+ return w90p910_init_cpu();
}
arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index d4d082c..8c6fc5a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -243,6 +243,10 @@
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_NONCACHED] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
@@ -406,9 +410,28 @@
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
}
+ /*
+ * Non-cacheable Normal - intended for memory areas that must
+ * not cause dirty cache line writebacks when used
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /* Non-cacheable Normal is XCB = 001 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_BUFFERED;
+ } else {
+ /* For both ARMv6 and non-TEX-remapping ARMv7 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_TEX(1);
+ }
+ } else {
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index cefc21c..d805a52 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -18,15 +18,14 @@
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/ptrace.h>
-
-#include "../kernel/stacktrace.h"
+#include <asm/stacktrace.h>
static int report_trace(struct stackframe *frame, void *d)
{
unsigned int *depth = d;
if (*depth) {
- oprofile_add_trace(frame->lr);
+ oprofile_add_trace(frame->pc);
(*depth)--;
}
@@ -70,9 +69,12 @@
struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
if (!user_mode(regs)) {
- unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1);
- walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE,
- report_trace, &depth);
+ struct stackframe frame;
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ walk_stackframe(&frame, report_trace, &depth);
return;
}
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 1d64287..e364a5e 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -113,7 +113,7 @@
void (*err_handler) (int, void *, int errcode);
void (*prog_handler) (int, void *, struct scatterlist *);
void *data;
- unsigned int dma_mode;
+ unsigned int dma_mode;
struct scatterlist *sg;
unsigned int resbytes;
int dma_num;
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 6061de8..dc66a47 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -90,7 +90,10 @@
{
}
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad) \
+ do { \
+ *((volatile unsigned int __force *)(ad)) = (d); \
+ } while (0)
/* CONFIG_S3C_BOOT_WATCHDOG
*
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 8de86e4..c8c98dd 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -377,6 +377,4 @@
u32 flags;
};
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
extern void vfp_save_state(void *location, u32 fpexc);
-#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index c92a08b..a5a4e57 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -172,7 +172,6 @@
@ retry the faulted instruction
ENDPROC(vfp_support_entry)
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
ENTRY(vfp_save_state)
@ Save the current VFP state
@ r0 - save location
@@ -190,7 +189,6 @@
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
ENDPROC(vfp_save_state)
-#endif
last_VFP_context_address:
.word last_VFP_context
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 9f476a1..75457b3 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -377,6 +377,55 @@
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
+/*
+ * Synchronise the hardware VFP state of a thread other than current with the
+ * saved one. This function is used by the ptrace mechanism.
+ */
+#ifdef CONFIG_SMP
+void vfp_sync_state(struct thread_info *thread)
+{
+ /*
+ * On SMP systems, the VFP state is automatically saved at every
+ * context switch. We mark the thread VFP state as belonging to a
+ * non-existent CPU so that the saved one will be reloaded when
+ * needed.
+ */
+ thread->vfpstate.hard.cpu = NR_CPUS;
+}
+#else
+void vfp_sync_state(struct thread_info *thread)
+{
+ unsigned int cpu = get_cpu();
+ u32 fpexc = fmrx(FPEXC);
+
+ /*
+ * If VFP is enabled, the previous state was already saved and
+ * last_VFP_context updated.
+ */
+ if (fpexc & FPEXC_EN)
+ goto out;
+
+ if (!last_VFP_context[cpu])
+ goto out;
+
+ /*
+ * Save the last VFP state on this CPU.
+ */
+ fmxr(FPEXC, fpexc | FPEXC_EN);
+ vfp_save_state(last_VFP_context[cpu], fpexc);
+ fmxr(FPEXC, fpexc);
+
+ /*
+ * Set the context to NULL to force a reload the next time the thread
+ * uses the VFP.
+ */
+ last_VFP_context[cpu] = NULL;
+
+out:
+ put_cpu();
+}
+#endif
+
#include <linux/smp.h>
/*
@@ -427,6 +476,18 @@
* in place; report VFP support to userspace.
*/
elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_VFPv3
+ if (VFP_arch >= 3) {
+ elf_hwcap |= HWCAP_VFPv3;
+
+ /*
+ * Check for VFPv3 D16. CPUs in this configuration
+ * only have 16 x 64bit registers.
+ */
+ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
+ elf_hwcap |= HWCAP_VFPv3D16;
+ }
+#endif
#ifdef CONFIG_NEON
/*
* Check for the presence of the Advanced SIMD
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index cf9e984..d7bc925 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -45,8 +45,6 @@
.stepping = 6,
};
-#define PATA_ICSIDE_MAX_SG 128
-
struct pata_icside_state {
void __iomem *irq_port;
void __iomem *ioc_base;
@@ -57,7 +55,6 @@
u8 disabled;
unsigned int speed[ATA_MAX_DEVICES];
} port[2];
- struct scatterlist sg[PATA_ICSIDE_MAX_SG];
};
struct pata_icside_info {
@@ -222,9 +219,7 @@
{
struct ata_port *ap = qc->ap;
struct pata_icside_state *state = ap->host->private_data;
- struct scatterlist *sg, *rsg = state->sg;
unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
- unsigned int si;
/*
* We are simplex; BUG if we try to fiddle with DMA
@@ -233,20 +228,12 @@
BUG_ON(dma_channel_active(state->dma));
/*
- * Copy ATAs scattered sg list into a contiguous array of sg
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- memcpy(rsg, sg, sizeof(*sg));
- rsg++;
- }
-
- /*
* Route the DMA signals to the correct interface
*/
writeb(state->port[ap->port_no].port_sel, state->ioc_base);
set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
- set_dma_sg(state->dma, state->sg, rsg - state->sg);
+ set_dma_sg(state->dma, qc->sg, qc->n_elem);
set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
/* issue r/w command */
@@ -306,8 +293,8 @@
static struct scsi_host_template pata_icside_sht = {
ATA_BASE_SHT(DRV_NAME),
- .sg_tablesize = PATA_ICSIDE_MAX_SG,
- .dma_boundary = ~0, /* no dma boundaries */
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
};
static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678bab..fede619 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- ret = i2c_bit_add_bus(&i2c->adap);
+ if (dev->id >= 0) {
+ /* static bus numbering */
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
+ } else
+ /* dynamic bus numbering */
+ ret = i2c_bit_add_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
return 0;
@@ -146,7 +152,7 @@
platform_driver_unregister(&i2c_versatile_driver);
}
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
module_exit(i2c_versatile_exit);
MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index abb04c8..634af6a 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -21,8 +21,6 @@
#include <linux/slab.h>
#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <asm/hardware/scoop.h>
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 9d1781a..1396742 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -21,8 +21,6 @@
#include <linux/slab.h>
#include <mach/spitz.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#define KB_ROWS 7
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 3fb51b5..94a1919 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -21,7 +21,6 @@
#include <mach/sharpsl.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 07c334f..0c4ce58 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -35,7 +35,6 @@
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/camera.h>
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2909bbc..a663429 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@
mod_timer(&host->timer, jiffies + HZ);
}
-static int mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, void *id)
{
struct mmc_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
@@ -633,7 +633,7 @@
return ret;
}
-static int mmci_remove(struct amba_device *dev)
+static int __devexit mmci_remove(struct amba_device *dev)
{
struct mmc_host *mmc = amba_get_drvdata(dev);
@@ -730,7 +730,7 @@
.name = DRIVER_NAME,
},
.probe = mmci_probe,
- .remove = mmci_remove,
+ .remove = __devexit_p(mmci_remove),
.suspend = mmci_suspend,
.resume = mmci_resume,
.id_table = mmci_ids,
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9702ad3..4300957 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,9 +30,8 @@
#include <asm/sizes.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/mmc.h>
#include "pxamci.h"
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fa129c0..10081e6 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index cc55cbc..61b69cc4 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,7 +22,6 @@
#include <linux/irq.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 31794c2..e775338 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -24,9 +24,8 @@
#include <mach/dma.h>
#include <mach/irda.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-uart.h>
+#include <mach/regs-ost.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index a45952e..8140f7c 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -236,8 +236,7 @@
* Use a DMA for RX and TX packets.
*/
#include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index c4ccd12..4d689b5 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -494,8 +494,6 @@
*/
#include <linux/dma-mapping.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#ifdef SMC_insl
#undef SMC_insl
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index bb9ddb9..16f84aa 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -28,7 +28,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
@@ -39,6 +38,44 @@
#include "soc_common.h"
#include "pxa2xx_base.h"
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb) * PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA(Nb) + 2 * PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA(Nb) + 3 * PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */
+
#define MCXX_SETUP_MASK (0x7f)
#define MCXX_ASST_MASK (0x1f)
@@ -183,23 +220,67 @@
MECR &= ~MECR_NOS;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
- int ret;
+ int i, ret;
struct pcmcia_low_level *ops;
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
if (!dev || !dev->platform_data)
return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = ops->nr;
+
+ /* Initialize processor specific parameters */
+ for (i = 0; i < ops->nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
#ifdef CONFIG_CPU_FREQ
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
- ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
+ ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo);
if (!ret)
pxa2xx_configure_sockets(dev);
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 7c8bcb4..4ed64d8 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,7 +16,6 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 6c3aac3..a7b943d 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,6 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index f663a01..d09c0dc 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -16,8 +16,6 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/eseries-gpio.h>
#include <asm/irq.h>
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 37ec55d..6cbb1b1 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -24,7 +24,6 @@
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/lubbock.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 877001d..1138551 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,11 +21,10 @@
#include <pcmcia/ss.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/mainstone.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 36c7a0b..e0e5cb3 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -22,8 +22,7 @@
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/trizeps4.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index dd10481..1787136 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -26,7 +26,6 @@
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
#include <mach/viper.h>
#include <asm/mach-types.h>
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7cb1273..810ac49 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -163,9 +163,55 @@
return p - buf;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
int first, int nr)
{
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
+ int i;
+
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = nr;
+
+ /* Initiliaze processor specific parameters */
+ for (i = 0; i < nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = first + i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/*
* set default MECR calculation if the board specific
* code did not specify one...
@@ -180,7 +226,7 @@
ops->frequency_change = sa1100_pcmcia_frequency_change;
#endif
- return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+ return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index f49ac66..163cf98 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -49,11 +49,6 @@
#include "soc_common.h"
-/* FIXME: platform dependent resource declaration has to move out of this file */
-#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
-#endif
-
#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
@@ -581,19 +576,6 @@
LIST_HEAD(soc_pcmcia_sockets);
static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
-static const char *skt_names[] = {
- "PCMCIA socket 0",
- "PCMCIA socket 1",
-};
-
-struct skt_dev_info {
- int nskt;
- struct soc_pcmcia_socket skt[0];
-};
-
-#define SKT_DEV_INFO_SIZE(n) \
- (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
-
#ifdef CONFIG_CPU_FREQ
static int
soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
@@ -637,26 +619,18 @@
static void soc_pcmcia_cpufreq_unregister(void) {}
#endif
-int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
+int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
+ struct skt_dev_info *sinfo)
{
- struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
int ret, i;
mutex_lock(&soc_pcmcia_sockets_lock);
- sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
- if (!sinfo) {
- ret = -ENOMEM;
- goto out;
- }
-
- sinfo->nskt = nr;
-
/*
* Initialise the per-socket structure.
*/
- for (i = 0; i < nr; i++) {
+ for (i = 0; i < sinfo->nskt; i++) {
skt = &sinfo->skt[i];
skt->socket.ops = &soc_common_pcmcia_operations;
@@ -668,43 +642,21 @@
skt->poll_timer.data = (unsigned long)skt;
skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
- skt->nr = first + i;
- skt->irq = NO_IRQ;
skt->dev = dev;
skt->ops = ops;
- skt->res_skt.start = _PCMCIA(skt->nr);
- skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
- skt->res_skt.name = skt_names[skt->nr];
- skt->res_skt.flags = IORESOURCE_MEM;
-
ret = request_resource(&iomem_resource, &skt->res_skt);
if (ret)
goto out_err_1;
- skt->res_io.start = _PCMCIAIO(skt->nr);
- skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
- skt->res_io.name = "io";
- skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
ret = request_resource(&skt->res_skt, &skt->res_io);
if (ret)
goto out_err_2;
- skt->res_mem.start = _PCMCIAMem(skt->nr);
- skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
- skt->res_mem.name = "memory";
- skt->res_mem.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_mem);
if (ret)
goto out_err_3;
- skt->res_attr.start = _PCMCIAAttr(skt->nr);
- skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
- skt->res_attr.name = "attribute";
- skt->res_attr.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_attr);
if (ret)
goto out_err_4;
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 38c6737..290e143 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -58,6 +58,11 @@
struct list_head node;
};
+struct skt_dev_info {
+ int nskt;
+ struct soc_pcmcia_socket skt[0];
+};
+
struct pcmcia_state {
unsigned detect: 1,
ready: 1,
@@ -132,7 +137,7 @@
extern struct list_head soc_pcmcia_sockets;
-extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
+extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo);
extern int soc_common_drv_pcmcia_remove(struct device *dev);
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index d26a5f8..4f247e4 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,8 @@
#include <asm/irq.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-ost.h>
#endif
#define RTC_DEF_DIVIDER 32768 - 1
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 68a6412..8ee01b9 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -390,7 +390,8 @@
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index bb2477b..d843513 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -508,7 +508,8 @@
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "eesox",
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index d9a546d..e2297b4 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -302,7 +302,8 @@
.can_queue = 8,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = "powertec",
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f6e3b86..a48a8a1 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -43,13 +43,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
struct uart_pxa_port {
struct uart_port port;
@@ -491,7 +485,7 @@
* Ensure the port will be enabled.
* This is required especially for serial console.
*/
- up->ier |= IER_UUE;
+ up->ier |= UART_IER_UUE;
/*
* Update the per-port timeout.
@@ -784,19 +778,15 @@
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = clk_get_rate(sport->clk);
- /*
- * Is it worth keeping this?
- */
- if (mmres->start == __PREG(FFUART))
- sport->name = "FFUART";
- else if (mmres->start == __PREG(BTUART))
- sport->name = "BTUART";
- else if (mmres->start == __PREG(STUART))
- sport->name = "STUART";
- else if (mmres->start == __PREG(HWUART))
- sport->name = "HWUART";
- else
+ switch (dev->id) {
+ case 0: sport->name = "FFUART"; break;
+ case 1: sport->name = "BTUART"; break;
+ case 2: sport->name = "STUART"; break;
+ case 3: sport->name = "HWUART"; break;
+ default:
sport->name = "???";
+ break;
+ }
sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
if (!sport->port.membase) {
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index d0fc4ca..d22fac2 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -34,8 +34,6 @@
#include <asm/delay.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index fb3055f..7cf74f8 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,6 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-
static struct clk *usb_host_clock;
static void ep93xx_start_hc(struct device *dev)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 967ac3d..330204a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2131,6 +2131,20 @@
far only synchronous displays are supported. If you plan to use
an LCD display with your i.MX31 system, say Y here.
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 2a998ca..edd5a85 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -106,6 +106,7 @@
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
new file mode 100644
index 0000000..509cb92
--- /dev/null
+++ b/drivers/video/broadsheetfb.c
@@ -0,0 +1,568 @@
+/*
+ * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/broadsheetfb.h>
+
+/* Display specific information */
+#define DPY_W 800
+#define DPY_H 600
+
+static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = {
+ .id = "broadsheetfb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = DPY_W,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .red = { 0, 4, 0 },
+ .green = { 0, 4, 0 },
+ .blue = { 0, 4, 0 },
+ .transp = { 0, 0, 0 },
+};
+
+/* main broadsheetfb functions */
+static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_WR, 0);
+ par->board->set_hdb(par, data);
+ par->board->set_ctl(par, BS_WR, 1);
+}
+
+static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_DC, 0);
+ broadsheet_issue_data(par, data);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, data);
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int i;
+
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, cmd);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < argc; i++)
+ broadsheet_issue_data(par, argv[i]);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+ u16 *data)
+{
+ int i;
+ u16 tmp;
+
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < size; i++) {
+ par->board->set_ctl(par, BS_WR, 0);
+ tmp = (data[i] & 0x0F) << 4;
+ tmp |= (data[i] & 0x0F00) << 4;
+ par->board->set_hdb(par, tmp);
+ par->board->set_ctl(par, BS_WR, 1);
+ }
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+ u16 res;
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_WR, 0);
+
+ res = par->board->get_hdb(par);
+
+ /* strobe wr */
+ par->board->set_ctl(par, BS_WR, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+
+ return res;
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+ u16 data)
+{
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_CS, 0);
+
+ broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+
+ par->board->set_ctl(par, BS_DC, 1);
+
+ broadsheet_issue_data(par, reg);
+ broadsheet_issue_data(par, data);
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
+{
+ broadsheet_send_command(par, reg);
+ msleep(100);
+ return broadsheet_get_data(par);
+}
+
+static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = DPY_W;
+ args[1] = DPY_H;
+ args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
+ args[3] = 2; /* gdrv cfg */
+ args[4] = (4 | (1 << 7)); /* lut index format */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ /* did the controller really set it? */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ args[0] = 4; /* fsync len */
+ args[1] = (10 << 8) | 4; /* fend/fbegin len */
+ args[2] = 10; /* line sync len */
+ args[3] = (100 << 8) | 4; /* line end/begin len */
+ args[4] = 6; /* pixel clock cfg */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
+
+ /* setup waveform */
+ args[0] = 0x886;
+ args[1] = 0;
+ broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
+
+ broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_write_reg(par, 0x330, 0x84);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ args[0] = (0x3 << 4);
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+}
+
+static void __devinit broadsheet_init(struct broadsheetfb_par *par)
+{
+ broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
+ /* the controller needs a second */
+ msleep(1000);
+ broadsheet_init_display(par);
+}
+
+static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
+ u16 y1, u16 y2)
+{
+ u16 args[5];
+ unsigned char *buf = (unsigned char *)par->info->screen_base;
+
+ /* y1 must be a multiple of 4 so drop the lower bits */
+ y1 &= 0xFFFC;
+ /* y2 must be a multiple of 4 , but - 1 so up the lower bits */
+ y2 |= 0x0003;
+
+ args[0] = 0x3 << 4;
+ args[1] = 0;
+ args[2] = y1;
+ args[3] = cpu_to_le16(par->info->var.xres);
+ args[4] = y2;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ buf += y1 * par->info->var.xres;
+ broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
+ (u16 *) buf);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = 0x3 << 4;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+/* this is called back from the deferred io workqueue */
+static void broadsheetfb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ u16 y1 = 0, h = 0;
+ int prev_index = -1;
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ int h_inc;
+ u16 yres = info->var.yres;
+ u16 xres = info->var.xres;
+
+ /* height increment is fixed per page */
+ h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ if (prev_index < 0) {
+ /* just starting so assign first page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ } else if ((prev_index + 1) == cur->index) {
+ /* this page is consecutive so increase our height */
+ h += h_inc;
+ } else {
+ /* page not consecutive, issue previous update first */
+ broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
+ /* start over with our non consecutive page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ }
+ prev_index = cur->index;
+ }
+
+ /* if we still have any pages to update we do so now */
+ if (h >= yres) {
+ /* its a full screen update, just do it */
+ broadsheetfb_dpy_update(info->par);
+ } else {
+ broadsheetfb_dpy_update_pages(info->par, y1,
+ min((u16) (y1 + h), yres));
+ }
+}
+
+static void broadsheetfb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_fillrect(info, rect);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_copyarea(info, area);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_imageblit(info, image);
+
+ broadsheetfb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct broadsheetfb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void *)(info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ broadsheetfb_dpy_update(par);
+
+ return (err) ? err : count;
+}
+
+static struct fb_ops broadsheetfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = broadsheetfb_write,
+ .fb_fillrect = broadsheetfb_fillrect,
+ .fb_copyarea = broadsheetfb_copyarea,
+ .fb_imageblit = broadsheetfb_imageblit,
+};
+
+static struct fb_deferred_io broadsheetfb_defio = {
+ .delay = HZ/4,
+ .deferred_io = broadsheetfb_dpy_deferred_io,
+};
+
+static int __devinit broadsheetfb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct broadsheetfb_par *par;
+ int i;
+
+ /* pick up board specific routines */
+ board = dev->dev.platform_data;
+ if (!board)
+ return -EINVAL;
+
+ /* try to count device specific driver, if can't, platform recalls */
+ if (!try_module_get(board->owner))
+ return -ENODEV;
+
+ info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
+ if (!info)
+ goto err;
+
+ videomemorysize = (DPY_W*DPY_H);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory)
+ goto err_fb_rel;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info->screen_base = (char *)videomemory;
+ info->fbops = &broadsheetfb_ops;
+
+ info->var = broadsheetfb_var;
+ info->fix = broadsheetfb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+ par->board = board;
+ par->write_reg = broadsheet_write_reg;
+ par->read_reg = broadsheet_read_reg;
+ init_waitqueue_head(&par->waitq);
+
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &broadsheetfb_defio;
+ fb_deferred_io_init(info);
+
+ retval = fb_alloc_cmap(&info->cmap, 16, 0);
+ if (retval < 0) {
+ dev_err(&dev->dev, "Failed to allocate colormap\n");
+ goto err_vfree;
+ }
+
+ /* set cmap */
+ for (i = 0; i < 16; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
+ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
+ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
+
+ retval = par->board->setup_irq(info);
+ if (retval < 0)
+ goto err_cmap;
+
+ /* this inits the dpy */
+ retval = board->init(par);
+ if (retval < 0)
+ goto err_free_irq;
+
+ broadsheet_init(par);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err_free_irq;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+
+ return 0;
+
+err_free_irq:
+ board->cleanup(par);
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_vfree:
+ vfree(videomemory);
+err_fb_rel:
+ framebuffer_release(info);
+err:
+ module_put(board->owner);
+ return retval;
+
+}
+
+static int __devexit broadsheetfb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ struct broadsheetfb_par *par = info->par;
+ unregister_framebuffer(info);
+ fb_deferred_io_cleanup(info);
+ par->board->cleanup(par);
+ fb_dealloc_cmap(&info->cmap);
+ vfree((void *)info->screen_base);
+ module_put(par->board->owner);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver broadsheetfb_driver = {
+ .probe = broadsheetfb_probe,
+ .remove = broadsheetfb_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "broadsheetfb",
+ },
+};
+
+static int __init broadsheetfb_init(void)
+{
+ return platform_driver_register(&broadsheetfb_driver);
+}
+
+static void __exit broadsheetfb_exit(void)
+{
+ platform_driver_unregister(&broadsheetfb_driver);
+}
+
+module_init(broadsheetfb_init);
+module_exit(broadsheetfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 7a9e42e..51b3736 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -1425,7 +1425,7 @@
#ifdef CONFIG_ARCH_SHARK
-#include <mach/hardware.h>
+#include <mach/framebuffer.h>
static int __devinit cyberpro_vl_probe(void)
{
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 2552b9f..07b371b 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -59,7 +59,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
#include <mach/bitfield.h>
#include <mach/pxafb.h>
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 79cf0b1..b0b4513 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1017,6 +1017,10 @@
s3c2410fb_init_registers(fbinfo);
+ /* re-activate our display after resume */
+ s3c2410fb_activate_var(fbinfo);
+ s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
+
return 0;
}
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 076f946..022d07a 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -251,22 +251,6 @@
#endif
#endif
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
#ifdef CONFIG_SA1100_H3600
static struct sa1100fb_mach_info h3600_info __initdata = {
.pixclock = 174757, .bpp = 16,
@@ -432,11 +416,6 @@
fbi->rgb[RGB_16] = &h3600_rgb_16;
}
#endif
-#ifdef CONFIG_SA1100_H3800
- if (machine_is_h3800()) {
- inf = &h3800_info;
- }
-#endif
#ifdef CONFIG_SA1100_COLLIE
if (machine_is_collie()) {
inf = &collie_info;
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index e19b457..4b84f29 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -30,7 +30,7 @@
#include <linux/timex.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#endif
#include <mach/reset.h>
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
new file mode 100644
index 0000000..a758534
--- /dev/null
+++ b/include/video/broadsheetfb.h
@@ -0,0 +1,59 @@
+/*
+ * broadsheetfb.h - definitions for the broadsheet framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_BROADSHEETFB_H_
+#define _LINUX_BROADSHEETFB_H_
+
+/* Broadsheet command defines */
+#define BS_CMD_INIT_SYS_RUN 0x06
+#define BS_CMD_INIT_DSPE_CFG 0x09
+#define BS_CMD_INIT_DSPE_TMG 0x0A
+#define BS_CMD_INIT_ROTMODE 0x0B
+#define BS_CMD_RD_REG 0x10
+#define BS_CMD_WR_REG 0x11
+#define BS_CMD_LD_IMG 0x20
+#define BS_CMD_LD_IMG_AREA 0x22
+#define BS_CMD_LD_IMG_END 0x23
+#define BS_CMD_WAIT_DSPE_TRG 0x28
+#define BS_CMD_WAIT_DSPE_FREND 0x29
+#define BS_CMD_RD_WFM_INFO 0x30
+#define BS_CMD_UPD_INIT 0x32
+#define BS_CMD_UPD_FULL 0x33
+#define BS_CMD_UPD_GDRV_CLR 0x37
+
+/* Broadsheet pin interface specific defines */
+#define BS_CS 0x01
+#define BS_DC 0x02
+#define BS_WR 0x03
+
+/* struct used by broadsheet. board specific stuff comes from *board */
+struct broadsheetfb_par {
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
+ u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
+ wait_queue_head_t waitq;
+};
+
+/* board specific routines */
+struct broadsheet_board {
+ struct module *owner;
+ int (*init)(struct broadsheetfb_par *);
+ int (*wait_for_rdy)(struct broadsheetfb_par *);
+ void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+ void (*set_hdb)(struct broadsheetfb_par *, u16);
+ u16 (*get_hdb)(struct broadsheetfb_par *);
+ void (*cleanup)(struct broadsheetfb_par *);
+ int (*get_panel_type)(void);
+ int (*setup_irq)(struct fb_info *);
+};
+
+#endif
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1bcf9cd..c536b37 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -402,7 +402,7 @@
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
select KALLSYMS
select KALLSYMS_ALL
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 35afd0c..718d066 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -21,7 +21,6 @@
#include <sound/pxa2xx-lib.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include <mach/regs-ac97.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 85cf591..ccec48f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -20,8 +20,6 @@
#include <sound/initval.h>
#include <sound/pxa2xx-lib.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include <mach/audio.h>
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 75a0d74..108b643 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -12,8 +12,7 @@
#include <sound/pcm_params.h>
#include <sound/pxa2xx-lib.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 1ba25a5..ec93066 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,8 +25,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/corgi.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 2e3386d..ac294c7 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,8 +21,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index fe4a729..949be9c 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -29,8 +29,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 6e98271..cad2c4c 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,8 +26,6 @@
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/poodle.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 73cb6b4..1dfdf66 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -29,7 +29,7 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/regs-ssp.h>
#include <mach/audio.h>
#include <mach/ssp.h>
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 812c2b4..a4a655f 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -20,8 +20,8 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 517991f..223de89 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -24,7 +24,7 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index a3b9e6b..de8778f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,8 +26,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index c77194f..050223d 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -30,8 +30,6 @@
#include <asm/mach-types.h>
#include <mach/tosa.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"