[ALSA] Add missing KERN_* suffix to printk
Add missing KERN_* suffix to printk.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index dc638f39..8260079 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -669,7 +669,7 @@
case 48000: val |= 0x06; break;
case 64000: val |= 0x07; break;
default:
- snd_printk("unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
+ snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate);
val |= 0x05; /* 44100 */
break;
}
@@ -854,10 +854,10 @@
chip->is_playing = 0;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
return -EINVAL;
@@ -935,10 +935,10 @@
chip->is_playing = 0;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk("FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
+ snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
return -EINVAL;
@@ -1356,7 +1356,7 @@
/* check if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
- snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -1374,7 +1374,7 @@
chip->mixer_port = pci_resource_start(pci, 4);
if (request_irq(pci->irq, snd_azf3328_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) {
- snd_printk("unable to grab IRQ %d\n", pci->irq);
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_azf3328_free(chip);
return -EBUSY;
}
@@ -1450,7 +1450,7 @@
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401,
chip->mpu_port, 1, pci->irq, 0,
&chip->rmidi)) < 0) {
- snd_printk("azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
+ snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
snd_card_free(card);
return err;
}
@@ -1462,7 +1462,7 @@
if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2,
OPL3_HW_AUTO, 1, &opl3) < 0) {
- snd_printk("azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
+ snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n",
chip->synth_port, chip->synth_port+2 );
} else {
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {