diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index e894902..87da405 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -102,7 +102,7 @@
 	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
 	strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
 	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
-						   normal_i2c);
+						   normal_i2c, NULL);
 	i2c_put_adapter(i2c_adap);
 	(...)
 }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index df937df..cf14ca0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1464,14 +1464,18 @@
 struct i2c_client *
 i2c_new_probed_device(struct i2c_adapter *adap,
 		      struct i2c_board_info *info,
-		      unsigned short const *addr_list)
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *, unsigned short addr))
 {
 	int i;
 
-	/* Stop here if the bus doesn't support probing */
-	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) {
-		dev_err(&adap->dev, "Probing not supported\n");
-		return NULL;
+	if (!probe) {
+		/* Stop here if the bus doesn't support probing */
+		if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) {
+			dev_err(&adap->dev, "Probing not supported\n");
+			return NULL;
+		}
+		probe = i2c_default_probe;
 	}
 
 	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
@@ -1490,7 +1494,7 @@
 		}
 
 		/* Test address responsiveness */
-		if (i2c_default_probe(adap, addr_list[i]))
+		if (probe(adap, addr_list[i]))
 			break;
 	}
 
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 5c9367a..7d1bfeb 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -322,10 +322,10 @@
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
-		i2c_new_probed_device(adapter, &info, scan_ds1775);
+		i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
 
 		strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
-		i2c_new_probed_device(adapter, &info, scan_adm1030);
+		i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
 
 		if( x.thermostat && x.fan ) {
 			x.running = 1;
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 407fa61..685d659 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -411,7 +411,7 @@
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
+		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
 	}
 }
 
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 809f7d3..73ce90c 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -117,7 +117,8 @@
 		break;
 	}
 
-	return i2c_new_probed_device(adap, &info, addr_list) == NULL ? -1 : 0;
+	return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+	       -1 : 0;
 }
 
 int cx18_i2c_register(struct cx18 *cx, unsigned idx)
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ffbe544..e7efb4b 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2385,7 +2385,7 @@
 
 	if (dev->init_data.name)
 		info.platform_data = &dev->init_data;
-	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
 }
 
 void em28xx_card_setup(struct em28xx *dev)
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index d391bbd..a74fa09 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -183,8 +183,8 @@
 			return -1;
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, type, I2C_NAME_SIZE);
-		return i2c_new_probed_device(adap, &info, addr_list) == NULL
-								     ? -1 : 0;
+		return i2c_new_probed_device(adap, &info, addr_list, NULL)
+							   == NULL ? -1 : 0;
 	}
 
 	/* Only allow one IR receiver to be registered per board */
@@ -221,7 +221,8 @@
 	info.platform_data = init_data;
 	strlcpy(info.type, type, I2C_NAME_SIZE);
 
-	return i2c_new_probed_device(adap, &info, addr_list) == NULL ? -1 : 0;
+	return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+	       -1 : 0;
 }
 
 /* Instantiate the IR receiver device using probing -- undesirable */
@@ -249,7 +250,7 @@
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-	return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list);
+	return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list, NULL);
 }
 
 int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 3ce7c64..8ee1179 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -381,7 +381,8 @@
 
 	/* Create the i2c client */
 	if (info->addr == 0 && probe_addrs)
-		client = i2c_new_probed_device(adapter, info, probe_addrs);
+		client = i2c_new_probed_device(adapter, info, probe_addrs,
+					       NULL);
 	else
 		client = i2c_new_device(adapter, info);
 
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index cd74bbd..653d6a6 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -329,7 +329,7 @@
 	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
 	strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
 	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
-						   normal_i2c);
+						   normal_i2c, NULL);
 	i2c_put_adapter(i2c_adap);
 	if (!isp1301_i2c_client) {
 		err("failed to connect I2C to ISP1301 USB Transceiver");
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 403b144..0fb280e 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -191,7 +191,7 @@
 			};
 
 			i2c_new_probed_device(&m2info->maven.adapter,
-					      &maven_info, addr_list);
+					      &maven_info, addr_list, NULL);
 		}
 	}
 	return m2info;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 38dd402..59a9f3c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -284,12 +284,15 @@
 
 /* If you don't know the exact address of an I2C device, use this variant
  * instead, which can probe for device presence in a list of possible
- * addresses.
+ * addresses. The "probe" callback function is optional. If it is provided,
+ * it must return 1 on successful probe, 0 otherwise. If it is not provided,
+ * a default probing method is used.
  */
 extern struct i2c_client *
 i2c_new_probed_device(struct i2c_adapter *adap,
 		      struct i2c_board_info *info,
-		      unsigned short const *addr_list);
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *, unsigned short addr));
 
 /* For devices that use several addresses, use i2c_new_dummy() to make
  * client handles for the extra addresses.