blob: a1a6af6c1c8f5888a83432b35bbf4d5b69bac2fe [file] [log] [blame]
/*
* cx18 ADEC firmware functions
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include "cx18-driver.h"
#include <linux/firmware.h>
#define FWFILE "v4l-cx23418-dig.fw"
int cx18_av_loadfw(struct cx18 *cx)
{
const struct firmware *fw = NULL;
u32 size;
u32 v;
const u8 *ptr;
int i;
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
CX18_ERR("unable to open firmware %s\n", FWFILE);
return -EINVAL;
}
cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); /* Byte 0 */
/* Reset the Mako core (Register is undocumented.) */
cx18_av_write4(cx, 0x8100, 0x00010000);
/* Put the 8051 in reset and enable firmware upload */
cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000);
ptr = fw->data;
size = fw->size;
for (i = 0; i < size; i++) {
u32 dl_control = 0x0F000000 | ((u32)ptr[i] << 16);
u32 value = 0;
int retries;
for (retries = 0; retries < 5; retries++) {
cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
value = cx18_av_read4(cx, CXADEC_DL_CTL);
if ((value & 0x3F00) == (dl_control & 0x3F00))
break;
}
if (retries >= 5) {
CX18_ERR("unable to load firmware %s\n", FWFILE);
release_firmware(fw);
return -EIO;
}
}
cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size);
/* Output to the 416 */
cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
/* Audio input control 1 set to Sony mode */
/* Audio output input 2 is 0 for slave operation input */
/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
after WS transition for first bit of audio word. */
cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);
/* Audio output control 1 is set to Sony mode */
/* Audio output control 2 is set to 1 for master mode */
/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
after WS transition for first bit of audio word. */
/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
are generated) */
cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);
/* set alt I2s master clock to /16 and enable alt divider i2s
passthrough */
cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687);
cx18_av_write4(cx, CXADEC_STD_DET_CTL, 0x000000F6);
/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
/* Register 0x09CC is defined by the Merlin firmware, and doesn't
have a name in the spec. */
cx18_av_write4(cx, 0x09CC, 1);
#define CX18_AUDIO_ENABLE 0xc72014
v = read_reg(CX18_AUDIO_ENABLE);
/* If bit 11 is 1 */
if (v & 0x800)
write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */
/* Enable WW auto audio standard detection */
v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
v |= 0xFF; /* Auto by default */
v |= 0x400; /* Stereo by default */
v |= 0x14000000;
cx18_av_write4(cx, CXADEC_STD_DET_CTL, v);
release_firmware(fw);
CX18_INFO("loaded %s firmware (%d bytes)\n", FWFILE, size);
return 0;
}