blob: 8090b9527d034d0ebd3d9f5f90d115c261bf766a [file] [log] [blame]
/*
* isa1200.c - Haptic Motor
*
* Copyright (C) 2009 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
* Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/pwm.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/clk.h>
#include <linux/i2c/isa1200.h>
#include "../staging/android/timed_output.h"
#include <linux/of_gpio.h>
#define ISA1200_HCTRL0 0x30
#define ISA1200_HCTRL1 0x31
#define ISA1200_HCTRL5 0x35
#define ISA1200_HCTRL0_RESET 0x01
#define ISA1200_HCTRL1_RESET 0x4B
#define ISA1200_HCTRL5_VIB_STRT 0xD5
#define ISA1200_HCTRL5_VIB_STOP 0x6B
#define ISA1200_POWER_DOWN_MASK 0x7F
struct isa1200_chip {
struct i2c_client *client;
struct isa1200_platform_data *pdata;
struct pwm_device *pwm;
struct hrtimer timer;
struct timed_output_dev dev;
struct work_struct work;
struct mutex lock;
struct mutex lock_clk;
unsigned int enable;
unsigned int period_ns;
bool is_len_gpio_valid;
struct regulator **regs;
bool clk_on;
u8 hctrl0_val;
struct clk *pwm_clk;
};
static int isa1200_read_reg(struct i2c_client *client, int reg)
{
int ret;
ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
return ret;
}
static int isa1200_write_reg(struct i2c_client *client, int reg, u8 value)
{
int ret;
ret = i2c_smbus_write_byte_data(client, reg, value);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
return ret;
}
static void isa1200_vib_set(struct isa1200_chip *haptic, int enable)
{
int rc = 0;
if (enable) {
/* if hen and len are seperate then enable hen
* otherwise set normal mode bit */
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 1);
else {
rc = isa1200_write_reg(haptic->client, ISA1200_HCTRL0,
haptic->hctrl0_val | ~ISA1200_POWER_DOWN_MASK);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
return;
}
}
if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) {
int period_us = haptic->period_ns / 1000;
rc = pwm_config(haptic->pwm,
(period_us * haptic->pdata->duty) / 100,
period_us);
if (rc < 0) {
pr_err("%s: pwm_config fail\n", __func__);
goto chip_dwn;
}
rc = pwm_enable(haptic->pwm);
if (rc < 0) {
pr_err("%s: pwm_enable fail\n", __func__);
goto chip_dwn;
}
} else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) {
/* check for board specific clk callback */
if (haptic->pdata->clk_enable) {
rc = haptic->pdata->clk_enable(true);
if (rc < 0) {
pr_err("%s: clk enable cb failed\n",
__func__);
goto chip_dwn;
}
}
mutex_lock(&haptic->lock_clk);
/* vote for clock */
if (haptic->pdata->need_pwm_clk && !haptic->clk_on) {
rc = clk_prepare_enable(haptic->pwm_clk);
if (rc < 0) {
pr_err("%s: clk enable failed\n",
__func__);
mutex_unlock(&haptic->lock_clk);
goto dis_clk_cb;
}
haptic->clk_on = true;
}
mutex_unlock(&haptic->lock_clk);
rc = isa1200_write_reg(haptic->client,
ISA1200_HCTRL5,
ISA1200_HCTRL5_VIB_STRT);
if (rc < 0) {
pr_err("%s: start vibartion fail\n", __func__);
goto dis_clk;
}
}
} else {
/* if hen and len are seperate then pull down hen
* otherwise set power down bit */
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
else {
rc = isa1200_write_reg(haptic->client, ISA1200_HCTRL0,
haptic->hctrl0_val & ISA1200_POWER_DOWN_MASK);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
return;
}
}
if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) {
pwm_disable(haptic->pwm);
} else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) {
rc = isa1200_write_reg(haptic->client,
ISA1200_HCTRL5,
ISA1200_HCTRL5_VIB_STOP);
if (rc < 0)
pr_err("%s: stop vibartion fail\n", __func__);
mutex_lock(&haptic->lock_clk);
/* de-vote clock */
if (haptic->pdata->need_pwm_clk && haptic->clk_on) {
clk_disable_unprepare(haptic->pwm_clk);
haptic->clk_on = false;
}
mutex_unlock(&haptic->lock_clk);
/* check for board specific clk callback */
if (haptic->pdata->clk_enable) {
rc = haptic->pdata->clk_enable(false);
if (rc < 0)
pr_err("%s: clk disable cb failed\n",
__func__);
}
}
}
return;
dis_clk:
mutex_lock(&haptic->lock_clk);
if (haptic->pdata->need_pwm_clk && haptic->clk_on) {
clk_disable_unprepare(haptic->pwm_clk);
haptic->clk_on = false;
}
mutex_unlock(&haptic->lock_clk);
dis_clk_cb:
if (haptic->pdata->clk_enable) {
rc = haptic->pdata->clk_enable(false);
if (rc < 0)
pr_err("%s: clk disable cb failed\n", __func__);
}
chip_dwn:
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
else {
rc = isa1200_write_reg(haptic->client, ISA1200_HCTRL0,
haptic->hctrl0_val & ISA1200_POWER_DOWN_MASK);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
return;
}
}
}
static void isa1200_chip_work(struct work_struct *work)
{
struct isa1200_chip *haptic;
haptic = container_of(work, struct isa1200_chip, work);
isa1200_vib_set(haptic, haptic->enable);
}
static void isa1200_chip_enable(struct timed_output_dev *dev, int value)
{
struct isa1200_chip *haptic = container_of(dev, struct isa1200_chip,
dev);
mutex_lock(&haptic->lock);
hrtimer_cancel(&haptic->timer);
if (value == 0)
haptic->enable = 0;
else {
value = (value > haptic->pdata->max_timeout ?
haptic->pdata->max_timeout : value);
haptic->enable = 1;
hrtimer_start(&haptic->timer,
ktime_set(value / 1000, (value % 1000) * 1000000),
HRTIMER_MODE_REL);
}
mutex_unlock(&haptic->lock);
schedule_work(&haptic->work);
}
static int isa1200_chip_get_time(struct timed_output_dev *dev)
{
struct isa1200_chip *haptic = container_of(dev, struct isa1200_chip,
dev);
if (hrtimer_active(&haptic->timer)) {
ktime_t r = hrtimer_get_remaining(&haptic->timer);
struct timeval t = ktime_to_timeval(r);
return t.tv_sec * 1000 + t.tv_usec / 1000;
} else
return 0;
}
static enum hrtimer_restart isa1200_vib_timer_func(struct hrtimer *timer)
{
struct isa1200_chip *haptic = container_of(timer, struct isa1200_chip,
timer);
haptic->enable = 0;
schedule_work(&haptic->work);
return HRTIMER_NORESTART;
}
static void dump_isa1200_reg(char *str, struct i2c_client *client)
{
pr_debug("%s reg0x%x=0x%x, reg0x%x=0x%x, reg0x%x=0x%x\n", str,
ISA1200_HCTRL0, isa1200_read_reg(client, ISA1200_HCTRL0),
ISA1200_HCTRL1, isa1200_read_reg(client, ISA1200_HCTRL1),
ISA1200_HCTRL5, isa1200_read_reg(client, ISA1200_HCTRL5));
}
static int isa1200_setup(struct i2c_client *client)
{
struct isa1200_chip *haptic = i2c_get_clientdata(client);
int temp, rc;
u8 value;
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0);
udelay(250);
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 1);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 1);
value = (haptic->pdata->smart_en << 3) |
(haptic->pdata->is_erm << 5) |
(haptic->pdata->ext_clk_en << 7);
rc = isa1200_write_reg(client, ISA1200_HCTRL1, value);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
goto reset_gpios;
}
if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) {
temp = haptic->pdata->pwm_fd.pwm_div;
if (temp < 128 || temp > 1024 || temp % 128) {
pr_err("%s: Invalid divider\n", __func__);
goto reset_hctrl1;
}
value = ((temp >> 7) - 1);
} else if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) {
temp = haptic->pdata->pwm_fd.pwm_freq;
if (temp < 22400 || temp > 172600 || temp % 22400) {
pr_err("%s: Invalid frequency\n", __func__);
goto reset_hctrl1;
}
value = ((temp / 22400) - 1);
haptic->period_ns = NSEC_PER_SEC / temp;
}
value |= (haptic->pdata->mode_ctrl << 3) |
(haptic->pdata->overdrive_high << 5) |
(haptic->pdata->overdrive_en << 5) |
(haptic->pdata->chip_en << 7);
rc = isa1200_write_reg(client, ISA1200_HCTRL0, value);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
goto reset_hctrl1;
}
/* if hen and len are seperate then pull down hen
* otherwise set power down bit */
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
else {
rc = isa1200_write_reg(client, ISA1200_HCTRL0,
value & ISA1200_POWER_DOWN_MASK);
if (rc < 0) {
pr_err("%s: i2c write failure\n", __func__);
goto reset_hctrl1;
}
}
haptic->hctrl0_val = value;
dump_isa1200_reg("new:", client);
return 0;
reset_hctrl1:
i2c_smbus_write_byte_data(client, ISA1200_HCTRL1,
ISA1200_HCTRL1_RESET);
reset_gpios:
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0);
return rc;
}
static int isa1200_reg_power(struct isa1200_chip *haptic, bool on)
{
const struct isa1200_regulator *reg_info =
haptic->pdata->regulator_info;
u8 i, num_reg = haptic->pdata->num_regulators;
int rc;
for (i = 0; i < num_reg; i++) {
rc = regulator_set_optimum_mode(haptic->regs[i],
on ? reg_info[i].load_uA : 0);
if (rc < 0) {
pr_err("%s: regulator_set_optimum_mode failed(%d)\n",
__func__, rc);
goto regs_fail;
}
rc = on ? regulator_enable(haptic->regs[i]) :
regulator_disable(haptic->regs[i]);
if (rc < 0) {
pr_err("%s: regulator %sable fail %d\n", __func__,
on ? "en" : "dis", rc);
regulator_set_optimum_mode(haptic->regs[i],
!on ? reg_info[i].load_uA : 0);
goto regs_fail;
}
}
return 0;
regs_fail:
while (i--) {
regulator_set_optimum_mode(haptic->regs[i],
!on ? reg_info[i].load_uA : 0);
!on ? regulator_enable(haptic->regs[i]) :
regulator_disable(haptic->regs[i]);
}
return rc;
}
static int isa1200_reg_setup(struct isa1200_chip *haptic, bool on)
{
const struct isa1200_regulator *reg_info =
haptic->pdata->regulator_info;
u8 i, num_reg = haptic->pdata->num_regulators;
int rc = 0;
/* put regulators */
if (on == false) {
i = num_reg;
goto put_regs;
}
haptic->regs = kzalloc(num_reg * sizeof(struct regulator *),
GFP_KERNEL);
if (!haptic->regs) {
pr_err("unable to allocate memory\n");
return -ENOMEM;
}
for (i = 0; i < num_reg; i++) {
haptic->regs[i] = regulator_get(&haptic->client->dev,
reg_info[i].name);
if (IS_ERR(haptic->regs[i])) {
rc = PTR_ERR(haptic->regs[i]);
pr_err("%s:regulator get failed(%d)\n", __func__, rc);
goto put_regs;
}
if (regulator_count_voltages(haptic->regs[i]) > 0) {
rc = regulator_set_voltage(haptic->regs[i],
reg_info[i].min_uV, reg_info[i].max_uV);
if (rc) {
pr_err("%s: regulator_set_voltage failed(%d)\n",
__func__, rc);
regulator_put(haptic->regs[i]);
goto put_regs;
}
}
}
return rc;
put_regs:
while (i--) {
if (regulator_count_voltages(haptic->regs[i]) > 0)
regulator_set_voltage(haptic->regs[i], 0,
reg_info[i].max_uV);
regulator_put(haptic->regs[i]);
}
kfree(haptic->regs);
return rc;
}
#ifdef CONFIG_OF
static int isa1200_parse_dt(struct device *dev,
struct isa1200_platform_data *pdata)
{
struct device_node *temp, *np = dev->of_node;
struct isa1200_regulator *reg_info;
enum of_gpio_flags hap_en_flags = OF_GPIO_ACTIVE_LOW;
enum of_gpio_flags hap_len_flags = OF_GPIO_ACTIVE_LOW;
int rc = 0;
u32 temp_val;
const char *temp_string;
rc = of_property_read_string(np, "label", &pdata->name);
if (rc) {
dev_err(dev, "Unable to read device name\n");
return rc;
}
pdata->chip_en = of_property_read_bool(np, "imagis,chip-en");
pdata->ext_clk_en = of_property_read_bool(np, "imagis,ext-clk-en");
pdata->is_erm = of_property_read_bool(np, "imagis,is-erm");
pdata->overdrive_high =
of_property_read_bool(np, "imagis,overdrive-high");
pdata->overdrive_en = of_property_read_bool(np, "imagis,overdrive-en");
pdata->smart_en = of_property_read_bool(np, "imagis,smart-en");
pdata->need_pwm_clk = of_property_read_bool(np, "imagis,need-pwm-clk");
pdata->hap_en_gpio = of_get_named_gpio_flags(np,
"imagis,hap-en-gpio", 0, &hap_en_flags);
pdata->hap_len_gpio = of_get_named_gpio_flags(np,
"imagis,hap-len-gpio", 0, &hap_len_flags);
rc = of_property_read_u32(np, "imagis,max-timeout",
&pdata->max_timeout);
if (rc) {
dev_err(dev, "Unable to read max timeout\n");
return rc;
}
rc = of_property_read_u32(np, "imagis,pwm-div", &pdata->pwm_fd.pwm_div);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read pwm division\n");
return rc;
}
rc = of_property_read_u32(np, "imagis,pwm-freq",
&pdata->pwm_fd.pwm_freq);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read pwm frequency\n");
return rc;
}
rc = of_property_read_u32(np, "imagis,pwm-ch-id", &pdata->pwm_ch_id);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read pwm channel id\n");
return rc;
}
rc = of_property_read_u32(np, "imagis,mode-ctrl", &pdata->mode_ctrl);
if (rc) {
dev_err(dev, "Unable to read control mode\n");
return rc;
}
rc = of_property_read_u32(np, "imagis,duty", &pdata->duty);
if (rc && (rc != -EINVAL)) {
dev_err(dev, "Unable to read duty cycle\n");
return rc;
}
pdata->num_regulators = 0;
temp = NULL;
while ((temp = of_get_next_child(np, temp)))
pdata->num_regulators++;
if (!pdata->num_regulators)
return 0;
reg_info = devm_kzalloc(dev, pdata->num_regulators *
sizeof(struct isa1200_regulator), GFP_KERNEL);
if (!reg_info)
return -ENOMEM;
pdata->regulator_info = reg_info;
for_each_child_of_node(np, temp) {
rc = of_property_read_string(temp,
"regulator-name", &temp_string);
if (rc) {
dev_err(dev, "Unable to read regulator name\n");
return rc;
} else
reg_info->name = temp_string;
rc = of_property_read_u32(temp, "regulator-max-microvolt",
&temp_val);
if (rc) {
dev_err(dev, "Unable to read max uV\n");
return rc;
} else
reg_info->max_uV = temp_val;
rc = of_property_read_u32(temp, "regulator-min-microvolt",
&temp_val);
if (rc) {
dev_err(dev, "Unable to read min uV\n");
return rc;
} else
reg_info->min_uV = temp_val;
rc = of_property_read_u32(temp, "regulator-max-microamp",
&temp_val);
if (rc) {
dev_err(dev, "Unable to read load uA\n");
return rc;
} else
reg_info->load_uA = temp_val;
reg_info++;
}
return 0;
}
#else
static int isa1200_parse_dt(struct device *dev,
struct isa1200_platform_data *pdata)
{
return -ENODEV;
}
#endif
static int __devinit isa1200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct isa1200_chip *haptic;
struct isa1200_platform_data *pdata;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "%s: no support for i2c read/write"
"byte data\n", __func__);
return -EIO;
}
if (client->dev.of_node) {
pdata = devm_kzalloc(&client->dev,
sizeof(struct isa1200_platform_data), GFP_KERNEL);
if (!pdata) {
dev_err(&client->dev, "Failed to allocate memory\n");
return -ENOMEM;
}
ret = isa1200_parse_dt(&client->dev, pdata);
if (ret) {
dev_err(&client->dev, "Parsing DT failed(%d)", ret);
return ret;
}
} else
pdata = client->dev.platform_data;
if (!pdata) {
dev_err(&client->dev, "%s: no platform data\n", __func__);
return -EINVAL;
}
if (pdata->dev_setup) {
ret = pdata->dev_setup(true);
if (ret < 0) {
dev_err(&client->dev, "dev setup failed\n");
return -EINVAL;
}
}
haptic = kzalloc(sizeof(struct isa1200_chip), GFP_KERNEL);
if (!haptic) {
ret = -ENOMEM;
goto mem_alloc_fail;
}
haptic->client = client;
haptic->enable = 0;
haptic->pdata = pdata;
if (pdata->regulator_info) {
ret = isa1200_reg_setup(haptic, true);
if (ret) {
dev_err(&client->dev, "%s: regulator setup failed\n",
__func__);
goto reg_setup_fail;
}
ret = isa1200_reg_power(haptic, true);
if (ret) {
dev_err(&client->dev, "%s: regulator power failed\n",
__func__);
goto reg_pwr_fail;
}
}
if (pdata->power_on) {
ret = pdata->power_on(1);
if (ret) {
dev_err(&client->dev, "%s: power-up failed\n",
__func__);
goto pwr_up_fail;
}
}
mutex_init(&haptic->lock);
mutex_init(&haptic->lock_clk);
INIT_WORK(&haptic->work, isa1200_chip_work);
haptic->clk_on = false;
hrtimer_init(&haptic->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
haptic->timer.function = isa1200_vib_timer_func;
/*register with timed output class*/
haptic->dev.name = pdata->name;
haptic->dev.get_time = isa1200_chip_get_time;
haptic->dev.enable = isa1200_chip_enable;
ret = timed_output_dev_register(&haptic->dev);
if (ret < 0)
goto timed_reg_fail;
i2c_set_clientdata(client, haptic);
ret = gpio_is_valid(pdata->hap_en_gpio);
if (ret) {
ret = gpio_request(pdata->hap_en_gpio, "haptic_en_gpio");
if (ret) {
dev_err(&client->dev, "%s: gpio %d request failed\n",
__func__, pdata->hap_en_gpio);
goto hen_gpio_fail;
}
} else {
dev_err(&client->dev, "%s: Invalid gpio %d\n", __func__,
pdata->hap_en_gpio);
goto hen_gpio_fail;
}
haptic->is_len_gpio_valid = true;
ret = gpio_is_valid(haptic->pdata->hap_len_gpio);
if (ret) {
ret = gpio_request(pdata->hap_len_gpio,
"haptic_ldo_gpio");
if (ret) {
dev_err(&client->dev,
"%s: gpio %d request failed\n",
__func__, pdata->hap_len_gpio);
goto len_gpio_fail;
}
} else {
dev_err(&client->dev, "%s: gpio is not used/Invalid %d\n",
__func__, pdata->hap_len_gpio);
haptic->is_len_gpio_valid = false;
}
ret = isa1200_setup(client);
if (ret) {
dev_err(&client->dev, "%s: setup fail %d\n", __func__, ret);
goto setup_fail;
}
if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) {
haptic->pwm = pwm_request(pdata->pwm_ch_id, id->name);
if (IS_ERR(haptic->pwm)) {
dev_err(&client->dev, "%s: pwm request failed\n",
__func__);
ret = PTR_ERR(haptic->pwm);
goto reset_hctrl0;
}
} else if (haptic->pdata->need_pwm_clk) {
haptic->pwm_clk = clk_get(&client->dev, "pwm_clk");
if (IS_ERR(haptic->pwm_clk)) {
dev_err(&client->dev, "pwm_clk get failed\n");
ret = PTR_ERR(haptic->pwm_clk);
goto reset_hctrl0;
}
}
printk(KERN_INFO "%s: %s registered\n", __func__, id->name);
return 0;
reset_hctrl0:
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0);
i2c_smbus_write_byte_data(client, ISA1200_HCTRL1,
ISA1200_HCTRL1_RESET);
i2c_smbus_write_byte_data(client, ISA1200_HCTRL0,
ISA1200_HCTRL0_RESET);
setup_fail:
if (haptic->is_len_gpio_valid == true)
gpio_free(pdata->hap_len_gpio);
len_gpio_fail:
gpio_free(pdata->hap_en_gpio);
hen_gpio_fail:
timed_output_dev_unregister(&haptic->dev);
timed_reg_fail:
mutex_destroy(&haptic->lock);
if (pdata->power_on)
pdata->power_on(0);
pwr_up_fail:
if (pdata->regulator_info)
isa1200_reg_power(haptic, false);
reg_pwr_fail:
if (pdata->regulator_info)
isa1200_reg_setup(haptic, false);
reg_setup_fail:
kfree(haptic);
mem_alloc_fail:
if (pdata->dev_setup)
pdata->dev_setup(false);
return ret;
}
static int __devexit isa1200_remove(struct i2c_client *client)
{
struct isa1200_chip *haptic = i2c_get_clientdata(client);
hrtimer_cancel(&haptic->timer);
cancel_work_sync(&haptic->work);
/* turn-off current vibration */
isa1200_vib_set(haptic, 0);
if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE)
pwm_free(haptic->pwm);
timed_output_dev_unregister(&haptic->dev);
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0);
gpio_free(haptic->pdata->hap_en_gpio);
if (haptic->is_len_gpio_valid == true)
gpio_free(haptic->pdata->hap_len_gpio);
/* reset hardware registers */
i2c_smbus_write_byte_data(client, ISA1200_HCTRL0,
ISA1200_HCTRL0_RESET);
i2c_smbus_write_byte_data(client, ISA1200_HCTRL1,
ISA1200_HCTRL1_RESET);
/* destroy mutex */
mutex_destroy(&haptic->lock);
mutex_destroy(&haptic->lock_clk);
/* power-off the chip */
if (haptic->pdata->regulator_info) {
isa1200_reg_power(haptic, false);
isa1200_reg_setup(haptic, false);
}
if (haptic->pdata->power_on)
haptic->pdata->power_on(0);
if (haptic->pdata->dev_setup)
haptic->pdata->dev_setup(false);
kfree(haptic);
return 0;
}
#ifdef CONFIG_PM
static int isa1200_suspend(struct i2c_client *client, pm_message_t mesg)
{
struct isa1200_chip *haptic = i2c_get_clientdata(client);
int ret;
hrtimer_cancel(&haptic->timer);
cancel_work_sync(&haptic->work);
/* turn-off current vibration */
isa1200_vib_set(haptic, 0);
gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0);
if (haptic->is_len_gpio_valid == true)
gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0);
if (haptic->pdata->regulator_info)
isa1200_reg_power(haptic, false);
if (haptic->pdata->power_on) {
ret = haptic->pdata->power_on(0);
if (ret) {
dev_err(&client->dev, "power-down failed\n");
return ret;
}
}
return 0;
}
static int isa1200_resume(struct i2c_client *client)
{
struct isa1200_chip *haptic = i2c_get_clientdata(client);
int ret;
if (haptic->pdata->regulator_info)
isa1200_reg_power(haptic, true);
if (haptic->pdata->power_on) {
ret = haptic->pdata->power_on(1);
if (ret) {
dev_err(&client->dev, "power-up failed\n");
return ret;
}
}
isa1200_setup(client);
return 0;
}
#else
#define isa1200_suspend NULL
#define isa1200_resume NULL
#endif
static const struct i2c_device_id isa1200_id[] = {
{ "isa1200_1", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, isa1200_id);
#ifdef CONFIG_OF
static struct of_device_id isa1200_match_table[] = {
{ .compatible = "imagis,isa1200",},
{ },
};
#else
#define isa1200_match_table NULL
#endif
static struct i2c_driver isa1200_driver = {
.driver = {
.name = "isa1200",
.of_match_table = isa1200_match_table,
},
.probe = isa1200_probe,
.remove = __devexit_p(isa1200_remove),
.suspend = isa1200_suspend,
.resume = isa1200_resume,
.id_table = isa1200_id,
};
static int __init isa1200_init(void)
{
return i2c_add_driver(&isa1200_driver);
}
static void __exit isa1200_exit(void)
{
i2c_del_driver(&isa1200_driver);
}
module_init(isa1200_init);
module_exit(isa1200_exit);
MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
MODULE_DESCRIPTION("ISA1200 Haptic Motor driver");
MODULE_LICENSE("GPL");