| /* |
| * Cobalt Qube/Raq PCI support |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995, 1996, 1997, 2002, 2003 by Ralf Baechle |
| * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) |
| */ |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/pci.h> |
| #include <asm/io.h> |
| #include <asm/gt64120.h> |
| |
| #include <asm/cobalt/cobalt.h> |
| |
| extern int cobalt_board_id; |
| |
| static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) |
| { |
| unsigned short cfgword; |
| unsigned char lt; |
| |
| /* Enable Bus Mastering and fast back to back. */ |
| pci_read_config_word(dev, PCI_COMMAND, &cfgword); |
| cfgword |= (PCI_COMMAND_FAST_BACK | PCI_COMMAND_MASTER); |
| pci_write_config_word(dev, PCI_COMMAND, cfgword); |
| |
| /* Enable both ide interfaces. ROM only enables primary one. */ |
| pci_write_config_byte(dev, 0x40, 0xb); |
| |
| /* Set latency timer to reasonable value. */ |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, <); |
| if (lt < 64) |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); |
| pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7); |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, |
| qube_raq_via_bmIDE_fixup); |
| |
| static void qube_raq_galileo_fixup(struct pci_dev *dev) |
| { |
| unsigned short galileo_id; |
| |
| /* Fix PCI latency-timer and cache-line-size values in Galileo |
| * host bridge. |
| */ |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); |
| pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7); |
| |
| /* |
| * On all machines prior to Q2, we had the STOP line disconnected |
| * from Galileo to VIA on PCI. The new Galileo does not function |
| * correctly unless we have it connected. |
| * |
| * Therefore we must set the disconnect/retry cycle values to |
| * something sensible when using the new Galileo. |
| */ |
| pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); |
| galileo_id &= 0xff; /* mask off class info */ |
| if (galileo_id >= 0x10) { |
| /* New Galileo, assumes PCI stop line to VIA is connected. */ |
| GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS); |
| } else if (galileo_id == 0x1 || galileo_id == 0x2) { |
| signed int timeo; |
| /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */ |
| timeo = GALILEO_INL(GT_PCI0_TOR_OFS); |
| /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */ |
| GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS); |
| } |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID, |
| qube_raq_galileo_fixup); |
| |
| static char irq_tab_cobalt[] __initdata = { |
| [COBALT_PCICONF_CPU] = 0, |
| [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ, |
| [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ, |
| [COBALT_PCICONF_VIA] = 0, |
| [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ, |
| [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ |
| }; |
| |
| static char irq_tab_raq2[] __initdata = { |
| [COBALT_PCICONF_CPU] = 0, |
| [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ, |
| [COBALT_PCICONF_RAQSCSI] = COBALT_RAQ_SCSI_IRQ, |
| [COBALT_PCICONF_VIA] = 0, |
| [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ, |
| [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ |
| }; |
| |
| int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| if (cobalt_board_id == COBALT_BRD_ID_RAQ2) |
| return irq_tab_raq2[slot]; |
| |
| return irq_tab_cobalt[slot]; |
| } |
| |
| /* Do platform specific device initialization at pci_enable_device() time */ |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |