Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Hook up sys_preadv and sys_pwritev
sparc64: add_node_ranges() must be __init
serial: sunsu: sunsu_kbd_ms_init needs to be __devinit
sparc: Fix section mismatch warnings in cs4231 sound driver.
sparc64: Fix section mismatch warnings in PCI controller drivers.
sparc64: Fix section mismatch warnings in power driver.
sparc64: get_cells() can't be marked __init
diff --git a/MAINTAINERS b/MAINTAINERS
index c3b2159..1f02d96 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -636,7 +636,7 @@
M: dirk@opfer-online.de
S: Maintained
-ARM/PALMTX,PALMT5,PALMLD SUPPORT
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
@@ -3057,7 +3057,7 @@
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
-M: drzeus-mmc@drzeus.cx
+M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -3939,7 +3939,7 @@
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
P: Pierre Ossman
-M: drzeus-sdhci@drzeus.cx
+M: pierre@ossman.eu
L: sdhci-devel@lists.ossman.eu
S: Maintained
@@ -4926,7 +4926,7 @@
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
-M: drzeus-wbsd@drzeus.cx
+M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 82428c2..f56837f 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1183,7 +1183,11 @@
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_BQ24022=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index c10d1aa..ada93a8 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -32,6 +32,7 @@
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
+#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 793fe7b..e6afff8 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -87,7 +87,7 @@
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
- u8 vbus_pin[]; /* port power-control pin */
+ u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index dafe4f7..336e51d 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -590,27 +590,28 @@
static int omap1_clk_enable(struct clk *clk)
{
int ret = 0;
- if (clk->usecount++ == 0) {
- if (likely(clk->parent)) {
- ret = omap1_clk_enable(clk->parent);
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
+ if (clk->usecount++ == 0) {
+ if (clk->parent) {
+ ret = omap1_clk_enable(clk->parent);
+ if (ret)
+ goto err;
if (clk->flags & CLOCK_NO_IDLE_PARENT)
omap1_clk_deny_idle(clk->parent);
}
ret = clk->ops->enable(clk);
-
- if (unlikely(ret != 0) && clk->parent) {
- omap1_clk_disable(clk->parent);
- clk->usecount--;
+ if (ret) {
+ if (clk->parent)
+ omap1_clk_disable(clk->parent);
+ goto err;
}
}
+ return ret;
+err:
+ clk->usecount--;
return ret;
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96a2006..3e66d90 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -343,6 +343,15 @@
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c80e1ba..682dbf4 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -57,6 +57,7 @@
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 117b5435f..b50ef39 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -121,7 +121,7 @@
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx2xx_ts_device = {
- .name = "ucb1400_ts",
+ .name = "ucb1400_core",
.id = -1,
};
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 10c2eaf..7c9c34c 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
@@ -32,12 +32,13 @@
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2
+ .flags = 0, /* defined later */
+ .wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
@@ -49,7 +50,7 @@
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -70,8 +71,8 @@
static void __init colibri_pxa300_init_eth(void)
{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
- set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 55b74a7..a18d37b 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
@@ -38,8 +38,8 @@
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2
+ .flags = 0, /* defined later */
+ .wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
@@ -51,7 +51,7 @@
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -72,8 +72,8 @@
static void __init colibri_pxa320_init_eth(void)
{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
- set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 12d0afc..ea34e34 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/etherdevice.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
@@ -28,6 +29,40 @@
#include "generic.h"
#include "devices.h"
+#if defined(CONFIG_AX88796)
+#define ETHER_ADDR_LEN 6
+static u8 ether_mac_addr[ETHER_ADDR_LEN];
+
+void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
+{
+ int i;
+ u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
+
+ /*
+ * If the bootloader passed in a serial boot tag, which contains a
+ * valid ethernet MAC, pass it to the interface. Toradex ships the
+ * modules with their own bootloader which provides a valid MAC
+ * this way.
+ */
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ ether_mac_addr[i] = serial & 0xff;
+ serial >>= 8;
+ }
+
+ if (is_valid_ether_addr(ether_mac_addr)) {
+ plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
+ plat_data->mac_addr = ether_mac_addr;
+ printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
+ __func__);
+ } else {
+ plat_data->flags |= AXFLG_MAC_FROMDEV;
+ printk(KERN_INFO "%s(): no valid serial boot tag found, "
+ "taking MAC from device\n", __func__);
+ }
+}
+#endif
+
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static int mmc_detect_pin;
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
index 4a2a295..5a221a4 100644
--- a/arch/arm/mach-pxa/csb701.c
+++ b/arch/arm/mach-pxa/csb701.c
@@ -5,6 +5,8 @@
#include <linux/input.h>
#include <linux/leds.h>
+#include <asm/mach-types.h>
+
static struct gpio_keys_button csb701_buttons[] = {
{
.code = 0x7,
@@ -54,6 +56,9 @@
static int __init csb701_init(void)
{
+ if (!machine_is_csb726())
+ return -ENODEV;
+
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 07500a0..a36fc17 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -29,6 +29,7 @@
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@@ -197,6 +198,7 @@
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 6126c04..1d00110 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -28,6 +28,7 @@
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@@ -198,6 +199,7 @@
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 74ab098..9866c7b 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -27,6 +27,7 @@
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@@ -199,6 +200,7 @@
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e800_udc_mach_info);
+ pxa_set_ac97_info(NULL);
}
MACHINE_START(E800, "Toshiba e800")
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 920dfb8..67611da 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -25,8 +25,10 @@
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
+#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
+#include <linux/delay.h>
#include <media/soc_camera.h>
@@ -62,6 +64,8 @@
#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define GPIO115_WLAN_PWEN (115)
+#define GPIO19_WLAN_STRAP (19)
static int mmc_cd;
static int nand_rb;
@@ -159,8 +163,8 @@
GPIO57_SSP1_TXD,
/* SSP2 */
- GPIO19_SSP2_SCLK,
- GPIO14_SSP2_SFRM,
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
@@ -648,20 +652,86 @@
.model = TDO35S,
};
+static struct pxa2xx_spi_master em_x270_spi_2_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+};
+
+static unsigned long em_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+};
+
+static int em_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
+ if (err)
+ return err;
+
+ gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ mdelay(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
+
+ gpio_direction_output(GPIO115_WLAN_PWEN, 0);
+ mdelay(100);
+ gpio_set_value(GPIO115_WLAN_PWEN, 1);
+ mdelay(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+}
+
+static int em_x270_libertas_teardown(struct spi_device *spi)
+{
+ gpio_set_value(GPIO115_WLAN_PWEN, 0);
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return 0;
+}
+
+struct libertas_spi_platform_data em_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .gpio_cs = 14,
+ .setup = em_x270_libertas_setup,
+ .teardown = em_x270_libertas_teardown,
+};
+
static struct spi_board_info em_x270_spi_devices[] __initdata = {
{
- .modalias = "tdo24m",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &em_x270_tdo24m_chip,
- .platform_data = &em_x270_tdo24m_pdata,
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = IRQ_GPIO(116),
+ .chip_select = 0,
+ .controller_data = &em_x270_libertas_chip,
+ .platform_data = &em_x270_libertas_pdata,
},
};
static void __init em_x270_init_spi(void)
{
pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
}
#else
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 3f2a01d..90230c6 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,5 +1,8 @@
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
+
+#include <net/ax88796.h>
+
/*
* common settings for all modules
*/
@@ -16,6 +19,10 @@
static inline void colibri_pxa3xx_init_lcd(int) {}
#endif
+#if defined(CONFIG_AX88796)
+extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
+#endif
+
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 82a399f..20ef37d 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -27,7 +27,7 @@
#define GPIO22_MAGICIAN_VIBRA_EN 22
#define GPIO26_MAGICIAN_GSM_POWER 26
#define GPIO27_MAGICIAN_USBC_PUEN 27
-#define GPIO30_MAGICIAN_nCHARGE_EN 30
+#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
#define GPIO37_MAGICIAN_KEY_HANGUP 37
#define GPIO38_MAGICIAN_KEY_CONTACTS 38
#define GPIO40_MAGICIAN_GSM_OUT2 40
@@ -98,7 +98,7 @@
#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 7c295a4..fb13c82 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -87,6 +87,7 @@
#define PALMLD_IDE_SIZE 0x00100000
#define PALMLD_PHYS_IO_START 0x40000000
+#define PALMLD_STR_BASE 0xa0200000
/* BATTERY */
#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 94db288..052bfe7 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -59,6 +59,7 @@
/* Various addresses */
#define PALMT5_PHYS_RAM_START 0xa0000000
#define PALMT5_PHYS_IO_START 0x40000000
+#define PALMT5_STR_BASE 0xa0200000
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
new file mode 100644
index 0000000..1236134
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -0,0 +1,68 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTE2_H_
+#define _INCLUDE_PALMTE2_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTE2_POWER_DETECT 9
+#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4
+#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMTE2_SD_DETECT_N 10
+#define GPIO_NR_PALMTE2_SD_POWER 55
+#define GPIO_NR_PALMTE2_SD_READONLY 51
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTE2_IR_DISABLE 48
+
+/* USB */
+#define GPIO_NR_PALMTE2_USB_DETECT_N 35
+#define GPIO_NR_PALMTE2_USB_PULLUP 53
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTE2_BL_POWER 56
+#define GPIO_NR_PALMTE2_LCD_POWER 37
+
+/* KEYS */
+#define GPIO_NR_PALMTE2_KEY_NOTES 5
+#define GPIO_NR_PALMTE2_KEY_TASKS 7
+#define GPIO_NR_PALMTE2_KEY_CALENDAR 11
+#define GPIO_NR_PALMTE2_KEY_CONTACTS 13
+#define GPIO_NR_PALMTE2_KEY_CENTER 14
+#define GPIO_NR_PALMTE2_KEY_LEFT 19
+#define GPIO_NR_PALMTE2_KEY_RIGHT 20
+#define GPIO_NR_PALMTE2_KEY_DOWN 21
+#define GPIO_NR_PALMTE2_KEY_UP 22
+
+/** HERE ARE INIT VALUES **/
+
+/* BACKLIGHT */
+#define PALMTE2_MAX_INTENSITY 0xFE
+#define PALMTE2_DEFAULT_INTENSITY 0x7E
+#define PALMTE2_LIMIT_MASK 0x7F
+#define PALMTE2_PRESCALER 0x3F
+#define PALMTE2_PERIOD_NS 3500
+
+/* BATTERY */
+#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1e8bccb..9f7d62f 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -78,6 +78,8 @@
#define PALMTX_PHYS_RAM_START 0xa0000000
#define PALMTX_PHYS_IO_START 0x40000000
+#define PALMTX_STR_BASE 0xa0200000
+
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index deeea1c..c899bbd 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,6 +25,8 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
@@ -552,33 +554,7 @@
static int power_supply_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
- if (ret)
- goto err_cs_ac;
- ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
- if (ret)
- goto err_cs_usb;
- ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
- if (ret)
- goto err_chg_en;
- ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
- if (!ret)
- ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
- if (ret)
- goto err_nchg_en;
-
- return 0;
-
-err_nchg_en:
- gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
-err_chg_en:
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
-err_cs_usb:
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
-err_cs_ac:
- return ret;
+ return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
}
static int magician_is_ac_online(void)
@@ -586,22 +562,8 @@
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
-static int magician_is_usb_online(void)
-{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
-}
-
-static void magician_set_charge(int flags)
-{
- gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
- gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
- gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
@@ -612,8 +574,6 @@
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = magician_is_ac_online,
- .is_usb_online = magician_is_usb_online,
- .set_charge = magician_set_charge,
.exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
@@ -646,6 +606,43 @@
.num_resources = ARRAY_SIZE(power_supply_resources),
};
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ {
+ .dev = &gpio_vbus.dev,
+ .supply = "vbus_draw",
+ },
+ {
+ .dev = &power_supply.dev,
+ .supply = "ac_draw",
+ },
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+ .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "bq24022",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
/*
* MMC/SD
@@ -756,6 +753,7 @@
&egpio,
&backlight,
&pasic3,
+ &bq24022,
&gpio_vbus,
&power_supply,
&strataflash,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 97c93a7..9203b06 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -50,6 +50,7 @@
#include <mach/pxa27x-udc.h>
#include <mach/i2c.h>
#include <mach/camera.h>
+#include <mach/audio.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
@@ -763,8 +764,6 @@
&mioa701_backlight_data);
MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
-MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
-MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
@@ -774,8 +773,6 @@
&mioa701_backlight,
&mioa701_led,
&pxa2xx_pcm,
- &pxa2xx_ac97,
- &mio_wm9713_codec,
&mioa701_sound,
&power_dev,
&strataflash,
@@ -818,6 +815,7 @@
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
+ pxa_set_ac97_info(NULL);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8587477..ecf5910 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/sysdev.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -68,10 +69,10 @@
GPIO47_FICP_TXD,
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@@ -507,6 +508,33 @@
};
/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmld_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMLD_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmld_pm_init);
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9521c7b..0680f1a 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -75,10 +75,10 @@
GPIO95_GPIO, /* usb power */
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@@ -450,6 +450,33 @@
};
/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmt5_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMT5_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmt5_pm_init);
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
new file mode 100644
index 0000000..43fcf2e
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -0,0 +1,466 @@
+/*
+ * Hardware definitions for Palm Tungsten|E2
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmte2.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmte2_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO10_GPIO, /* SD detect */
+ GPIO55_GPIO, /* SD power */
+ GPIO51_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO53_GPIO, /* usb power */
+
+ /* IrDA */
+ GPIO48_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* GPIO KEYS */
+ GPIO5_GPIO, /* notes */
+ GPIO7_GPIO, /* tasks */
+ GPIO11_GPIO, /* calendar */
+ GPIO13_GPIO, /* contacts */
+ GPIO14_GPIO, /* center */
+ GPIO19_GPIO, /* left */
+ GPIO20_GPIO, /* right */
+ GPIO21_GPIO, /* down */
+ GPIO22_GPIO, /* up */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO4_GPIO, /* Hotsync button */
+ GPIO9_GPIO, /* power detect */
+ GPIO37_GPIO, /* LCD power */
+ GPIO56_GPIO, /* Backlight power */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmte2_mci_init(struct device *dev,
+ irq_handler_t palmte2_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
+ palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmte2_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+}
+
+static void palmte2_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmte2_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmte2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmte2_mci_power,
+ .get_ro = palmte2_mci_get_ro,
+ .init = palmte2_mci_init,
+ .exit = palmte2_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmte2_pxa_buttons[] = {
+ {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
+ {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
+ {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
+ {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
+ {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
+ {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
+ {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
+ {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
+ {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
+};
+
+static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
+ .buttons = palmte2_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
+};
+
+static struct platform_device palmte2_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmte2_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmte2_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmte2_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+ gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmte2_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTE2_MAX_INTENSITY,
+ .dft_brightness = PALMTE2_MAX_INTENSITY,
+ .pwm_period_ns = PALMTE2_PERIOD_NS,
+ .init = palmte2_backlight_init,
+ .notify = palmte2_backlight_notify,
+ .exit = palmte2_backlight_exit,
+};
+
+static struct platform_device palmte2_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &palmte2_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmte2_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmte2_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+}
+
+static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmte2_ficp_platform_data = {
+ .startup = palmte2_irda_startup,
+ .shutdown = palmte2_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmte2_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
+ .gpio_pullup_inverted = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmte2_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static char *palmte2_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmte2_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmte2_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmte2_lcd_modes[] = {
+{
+ .pixclock = 77757,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 28,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmte2_lcd_screen = {
+ .modes = palmte2_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmte2_pxa_keys,
+#endif
+ &palmte2_backlight,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmte2_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
+ }
+}
+
+static void __init palmte2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+
+ set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_mci_info(&palmte2_mci_platform_data);
+ palmte2_udc_init();
+ pxa_set_udc_info(&palmte2_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmte2_ficp_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTE2, "Palm Tungsten|E2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmte2_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b490c09..59d0c1c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -93,10 +93,10 @@
GPIO116_GPIO, /* wifi ready */
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@@ -459,6 +459,33 @@
};
/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmtx_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMTX_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmtx_pm_init);
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 6e8ade6..afac5b6 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -45,6 +45,7 @@
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
+#include <mach/audio.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
@@ -914,6 +915,7 @@
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b438fc4..e6344ec 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -828,6 +828,17 @@
BOOTMEM_DEFAULT);
}
+ if (machine_is_palmld() || machine_is_palmtx()) {
+ reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ }
+
+ if (machine_is_palmt5())
+ reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 9015979..10a9eb0 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -308,11 +308,13 @@
#define __NR_dup3 1316
#define __NR_pipe2 1317
#define __NR_inotify_init1 1318
+#define __NR_preadv 1319
+#define __NR_pwritev 1320
#ifdef __KERNEL__
-#define NR_syscalls 295 /* length of syscall table */
+#define NR_syscalls 297 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 8dc6966..7bebac0 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1803,6 +1803,8 @@
data8 sys_dup3
data8 sys_pipe2
data8 sys_inotify_init1
+ data8 sys_preadv
+ data8 sys_pwritev // 1320
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 0beba0d..bb83b1c 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -154,6 +154,7 @@
* CPUID levels like 0x6, 0xA etc
*/
#define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */
+#define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */
/* Virtualization flags: Linux defined */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 098ec84..f287092 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -431,6 +431,12 @@
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+ if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) {
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
+ /* Make LAPIC timer preferrable over percpu HPET */
+ lapic_clockevent.rating = 150;
+ }
+
memcpy(levt, &lapic_clockevent, sizeof(*levt));
levt->cpumask = cpumask_of(smp_processor_id());
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 8220ae6..c965e52 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -31,6 +31,7 @@
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
+ { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 },
{ 0, 0, 0, 0 }
};
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 19f6b9d..9d3af38 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -68,6 +68,7 @@
unsigned int max_freq;
unsigned int resume;
unsigned int cpu_feature;
+ u64 saved_aperf, saved_mperf;
};
static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
@@ -241,26 +242,23 @@
return cmd.val;
}
-struct perf_cur {
+struct perf_pair {
union {
struct {
u32 lo;
u32 hi;
} split;
u64 whole;
- } aperf_cur, mperf_cur;
+ } aperf, mperf;
};
static long read_measured_perf_ctrs(void *_cur)
{
- struct perf_cur *cur = _cur;
+ struct perf_pair *cur = _cur;
- rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi);
- rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi);
-
- wrmsr(MSR_IA32_APERF, 0, 0);
- wrmsr(MSR_IA32_MPERF, 0, 0);
+ rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
+ rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
return 0;
}
@@ -281,52 +279,57 @@
static unsigned int get_measured_perf(struct cpufreq_policy *policy,
unsigned int cpu)
{
- struct perf_cur cur;
+ struct perf_pair readin, cur;
unsigned int perf_percent;
unsigned int retval;
- if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur))
+ if (!work_on_cpu(cpu, read_measured_perf_ctrs, &readin))
return 0;
+ cur.aperf.whole = readin.aperf.whole -
+ per_cpu(drv_data, cpu)->saved_aperf;
+ cur.mperf.whole = readin.mperf.whole -
+ per_cpu(drv_data, cpu)->saved_mperf;
+ per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
+ per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+
#ifdef __i386__
/*
* We dont want to do 64 bit divide with 32 bit kernel
* Get an approximate value. Return failure in case we cannot get
* an approximate value.
*/
- if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) {
+ if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
int shift_count;
u32 h;
- h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi);
+ h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
shift_count = fls(h);
- cur.aperf_cur.whole >>= shift_count;
- cur.mperf_cur.whole >>= shift_count;
+ cur.aperf.whole >>= shift_count;
+ cur.mperf.whole >>= shift_count;
}
- if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) {
+ if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
int shift_count = 7;
- cur.aperf_cur.split.lo >>= shift_count;
- cur.mperf_cur.split.lo >>= shift_count;
+ cur.aperf.split.lo >>= shift_count;
+ cur.mperf.split.lo >>= shift_count;
}
- if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo)
- perf_percent = (cur.aperf_cur.split.lo * 100) /
- cur.mperf_cur.split.lo;
+ if (cur.aperf.split.lo && cur.mperf.split.lo)
+ perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
else
perf_percent = 0;
#else
- if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) {
+ if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
int shift_count = 7;
- cur.aperf_cur.whole >>= shift_count;
- cur.mperf_cur.whole >>= shift_count;
+ cur.aperf.whole >>= shift_count;
+ cur.mperf.whole >>= shift_count;
}
- if (cur.aperf_cur.whole && cur.mperf_cur.whole)
- perf_percent = (cur.aperf_cur.whole * 100) /
- cur.mperf_cur.whole;
+ if (cur.aperf.whole && cur.mperf.whole)
+ perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
else
perf_percent = 0;
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index 0bd48e6..ce2ed3e 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -33,7 +33,6 @@
#include <linux/timex.h>
#include <linux/io.h>
#include <linux/acpi.h>
-#include <linux/kernel.h>
#include <asm/msr.h>
#include <acpi/processor.h>
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index bd3c937..7737afb 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -90,7 +90,6 @@
{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
- {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b0de631..3c7d894 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -903,7 +903,7 @@
},
};
-static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie)
+static void acpi_battery_init_async(void *unused, async_cookie_t cookie)
{
if (acpi_disabled)
return;
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index 05dfdc9..d0d550d 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -343,9 +343,6 @@
}
#endif /* HAVE_ACPI_LEGACY_ALARM */
-extern struct list_head acpi_wakeup_device_list;
-extern spinlock_t acpi_device_lock;
-
static int
acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
{
@@ -353,7 +350,7 @@
seq_printf(seq, "Device\tS-state\t Status Sysfs node\n");
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
@@ -361,7 +358,6 @@
if (!dev->wakeup.flags.valid)
continue;
- spin_unlock(&acpi_device_lock);
ldev = acpi_get_physical_device(dev->handle);
seq_printf(seq, "%s\t S%d\t%c%-8s ",
@@ -376,9 +372,8 @@
seq_printf(seq, "\n");
put_device(ldev);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return 0;
}
@@ -409,7 +404,7 @@
strbuf[len] = '\0';
sscanf(strbuf, "%s", str);
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
@@ -446,7 +441,7 @@
}
}
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return count;
}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 4e6e758..6fe1214 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -145,6 +145,9 @@
struct acpi_processor_power *pwr = &pr->power;
u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
+ if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
+ return;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 20c23c0..8ff510b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -24,7 +24,7 @@
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
-DEFINE_SPINLOCK(acpi_device_lock);
+DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
struct acpi_device_bus_id{
@@ -491,7 +491,6 @@
*/
INIT_LIST_HEAD(&device->children);
INIT_LIST_HEAD(&device->node);
- INIT_LIST_HEAD(&device->g_list);
INIT_LIST_HEAD(&device->wakeup_list);
new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
@@ -500,7 +499,7 @@
return -ENOMEM;
}
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
/*
* Find suitable bus_id and instance number in acpi_bus_id_list
* If failed, create one and link it into acpi_bus_id_list
@@ -521,14 +520,12 @@
}
dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
- if (device->parent) {
+ if (device->parent)
list_add_tail(&device->node, &device->parent->children);
- list_add_tail(&device->g_list, &device->parent->g_list);
- } else
- list_add_tail(&device->g_list, &acpi_device_list);
+
if (device->wakeup.flags.valid)
list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
if (device->parent)
device->dev.parent = &parent->dev;
@@ -549,28 +546,22 @@
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
end:
- spin_lock(&acpi_device_lock);
- if (device->parent) {
+ mutex_lock(&acpi_device_lock);
+ if (device->parent)
list_del(&device->node);
- list_del(&device->g_list);
- } else
- list_del(&device->g_list);
list_del(&device->wakeup_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return result;
}
static void acpi_device_unregister(struct acpi_device *device, int type)
{
- spin_lock(&acpi_device_lock);
- if (device->parent) {
+ mutex_lock(&acpi_device_lock);
+ if (device->parent)
list_del(&device->node);
- list_del(&device->g_list);
- } else
- list_del(&device->g_list);
list_del(&device->wakeup_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
acpi_detach_data(device->handle, acpi_bus_data_handler);
diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h
index cfaf8f5..8a8f3b3 100644
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -5,3 +5,6 @@
extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
extern void acpi_enable_wakeup_device(u8 sleep_state);
extern void acpi_disable_wakeup_device(u8 sleep_state);
+
+extern struct list_head acpi_wakeup_device_list;
+extern struct mutex acpi_device_lock;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index e8c143c..9cd15e8 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -98,6 +98,7 @@
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
+static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
@@ -123,6 +124,7 @@
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
.resume = acpi_thermal_resume,
+ .notify = acpi_thermal_notify,
},
};
@@ -192,6 +194,7 @@
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
+ int kelvin_offset;
struct mutex lock;
};
@@ -581,7 +584,7 @@
}
/* sys I/F for generic thermal sysfs support */
-#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
static int thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
@@ -596,7 +599,7 @@
if (result)
return result;
- *temp = KELVIN_TO_MILLICELSIUS(tz->temperature);
+ *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
return 0;
}
@@ -702,7 +705,8 @@
if (tz->trips.critical.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
@@ -711,7 +715,8 @@
if (tz->trips.hot.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.hot.temperature);
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
@@ -720,7 +725,8 @@
if (tz->trips.passive.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.passive.temperature);
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
@@ -730,7 +736,8 @@
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.active[i].temperature);
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
@@ -745,7 +752,8 @@
if (tz->trips.critical.flags.valid) {
*temperature = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
} else
return -EINVAL;
@@ -1264,17 +1272,14 @@
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
- struct acpi_thermal *tz = data;
- struct acpi_device *device = NULL;
+ struct acpi_thermal *tz = acpi_driver_data(device);
if (!tz)
return;
- device = tz->device;
-
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
acpi_thermal_check(tz);
@@ -1298,8 +1303,6 @@
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_thermal_get_info(struct acpi_thermal *tz)
@@ -1334,10 +1337,28 @@
return 0;
}
+/*
+ * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
+ * handles temperature values with a single decimal place. As a consequence,
+ * some implementations use an offset of 273.1 and others use an offset of
+ * 273.2. Try to find out which one is being used, to present the most
+ * accurate and visually appealing number.
+ *
+ * The heuristic below should work for all ACPI thermal zones which have a
+ * critical trip point with a value being a multiple of 0.5 degree Celsius.
+ */
+static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
+{
+ if (tz->trips.critical.flags.valid &&
+ (tz->trips.critical.temperature % 5) == 1)
+ tz->kelvin_offset = 2731;
+ else
+ tz->kelvin_offset = 2732;
+}
+
static int acpi_thermal_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
@@ -1360,6 +1381,8 @@
if (result)
goto free_memory;
+ acpi_thermal_guess_offset(tz);
+
result = acpi_thermal_register_thermal_zone(tz);
if (result)
goto free_memory;
@@ -1368,21 +1391,11 @@
if (result)
goto unregister_thermal_zone;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify, tz);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto remove_fs;
- }
-
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
-remove_fs:
- acpi_thermal_remove_fs(device);
unregister_thermal_zone:
thermal_zone_device_unregister(tz->thermal_zone);
free_memory:
@@ -1393,7 +1406,6 @@
static int acpi_thermal_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (!device || !acpi_driver_data(device))
@@ -1401,10 +1413,6 @@
tz = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify);
-
acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ab06143..cd4fb75 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -79,6 +79,7 @@
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
+static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id video_device_ids[] = {
{ACPI_VIDEO_HID, 0},
@@ -94,6 +95,7 @@
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
.resume = acpi_video_resume,
+ .notify = acpi_video_bus_notify,
},
};
@@ -1986,17 +1988,15 @@
return acpi_video_bus_DOS(video, 0, 1);
}
-static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
{
- struct acpi_video_bus *video = data;
- struct acpi_device *device = NULL;
+ struct acpi_video_bus *video = acpi_driver_data(device);
struct input_dev *input;
int keycode;
if (!video)
return;
- device = video->device;
input = video->input;
switch (event) {
@@ -2127,7 +2127,6 @@
static int acpi_video_bus_add(struct acpi_device *device)
{
- acpi_status status;
struct acpi_video_bus *video;
struct input_dev *input;
int error;
@@ -2169,20 +2168,10 @@
acpi_video_bus_get_devices(video, device);
acpi_video_bus_start_devices(video);
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify, video);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop_video;
- }
-
video->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_stop_video;
}
snprintf(video->phys, sizeof(video->phys),
@@ -2218,9 +2207,6 @@
err_free_input_dev:
input_free_device(input);
- err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify);
err_stop_video:
acpi_video_bus_stop_devices(video);
acpi_video_bus_put_devices(video);
@@ -2235,7 +2221,6 @@
static int acpi_video_bus_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
struct acpi_video_bus *video = NULL;
@@ -2245,11 +2230,6 @@
video = acpi_driver_data(device);
acpi_video_bus_stop_devices(video);
-
- status = acpi_remove_notify_handler(video->device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify);
-
acpi_video_bus_put_devices(video);
acpi_video_bus_remove_fs(device);
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 5aee8c2..88725dc 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -12,12 +12,14 @@
#include "internal.h"
#include "sleep.h"
+/*
+ * We didn't lock acpi_device_lock in the file, because it invokes oops in
+ * suspend/resume and isn't really required as this is called in S-state. At
+ * that time, there is no device hotplug
+ **/
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("wakeup_devices")
-extern struct list_head acpi_wakeup_device_list;
-extern spinlock_t acpi_device_lock;
-
/**
* acpi_enable_wakeup_device_prep - prepare wakeup devices
* @sleep_state: ACPI state
@@ -29,7 +31,6 @@
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct acpi_device,
@@ -40,11 +41,8 @@
(sleep_state > (u32) dev->wakeup.sleep_state))
continue;
- spin_unlock(&acpi_device_lock);
acpi_enable_wakeup_device_power(dev, sleep_state);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
/**
@@ -60,7 +58,6 @@
* Caution: this routine must be invoked when interrupt is disabled
* Refer ACPI2.0: P212
*/
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
@@ -74,22 +71,17 @@
if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
|| sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
- spin_unlock(&acpi_device_lock);
/* set_gpe_type will disable GPE, leave it like that */
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_RUNTIME);
- spin_lock(&acpi_device_lock);
}
continue;
}
- spin_unlock(&acpi_device_lock);
if (!dev->wakeup.flags.run_wake)
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
/**
@@ -101,7 +93,6 @@
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
@@ -112,19 +103,16 @@
if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
|| sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
- spin_unlock(&acpi_device_lock);
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
/* Re-enable it, since set_gpe_type will disable it */
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
- spin_lock(&acpi_device_lock);
}
continue;
}
- spin_unlock(&acpi_device_lock);
acpi_disable_wakeup_device_power(dev);
/* Never disable run-wake GPE */
if (!dev->wakeup.flags.run_wake) {
@@ -133,16 +121,14 @@
acpi_clear_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number, ACPI_NOT_ISR);
}
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
int __init acpi_wakeup_device_init(void)
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct acpi_device,
@@ -150,15 +136,13 @@
/* In case user doesn't load button driver */
if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
continue;
- spin_unlock(&acpi_device_lock);
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
dev->wakeup.state.enabled = 1;
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return 0;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c232d11..06084db 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -208,7 +208,7 @@
}
ext_csd_struct = ext_csd[EXT_CSD_REV];
- if (ext_csd_struct > 2) {
+ if (ext_csd_struct > 3) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
ext_csd_struct);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 26fc098..cd81c39 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -363,15 +363,6 @@
goto err;
/*
- * For SPI, enable CRC as appropriate.
- */
- if (mmc_host_is_spi(host)) {
- err = mmc_spi_set_crc(host, use_spi_crc);
- if (err)
- goto err;
- }
-
- /*
* Fetch CID from card.
*/
if (mmc_host_is_spi(host))
@@ -458,6 +449,18 @@
}
/*
+ * For SPI, enable CRC as appropriate.
+ * This CRC enable is located AFTER the reading of the
+ * card registers because some SDHC cards are not able
+ * to provide valid CRCs for non-512-byte blocks.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto free_card;
+ }
+
+ /*
* Attempt to change to high-speed (if supported)
*/
err = mmc_switch_hs(card);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index eb29b1d..e0be21a 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -307,13 +307,6 @@
wmb();
- if (host->actual_bus_width == MMC_BUS_WIDTH_4)
- BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */
- else
- BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */
-
- RSSR(host->dma) = DMA_REQ_SDHC;
-
set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
@@ -818,9 +811,11 @@
if (ios->bus_width == MMC_BUS_WIDTH_4) {
host->actual_bus_width = MMC_BUS_WIDTH_4;
imx_gpio_mode(PB11_PF_SD_DAT3);
+ BLR(host->dma) = 0; /* burst 64 byte read/write */
} else {
host->actual_bus_width = MMC_BUS_WIDTH_1;
imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
+ BLR(host->dma) = 16; /* burst 16 byte read/write */
}
if (host->power_mode != ios->power_mode) {
@@ -938,7 +933,7 @@
mod_timer(&host->timer, jiffies + (HZ>>1));
}
-static int imxmci_probe(struct platform_device *pdev)
+static int __init imxmci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct imxmci_host *host = NULL;
@@ -1034,6 +1029,7 @@
}
host->dma_allocated = 1;
imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host);
+ RSSR(host->dma) = DMA_REQ_SDHC;
tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host);
host->status_reg=0;
@@ -1079,7 +1075,7 @@
return ret;
}
-static int imxmci_remove(struct platform_device *pdev)
+static int __exit imxmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
@@ -1145,8 +1141,7 @@
#endif /* CONFIG_PM */
static struct platform_driver imxmci_driver = {
- .probe = imxmci_probe,
- .remove = imxmci_remove,
+ .remove = __exit_p(imxmci_remove),
.suspend = imxmci_suspend,
.resume = imxmci_resume,
.driver = {
@@ -1157,7 +1152,7 @@
static int __init imxmci_init(void)
{
- return platform_driver_register(&imxmci_driver);
+ return platform_driver_probe(&imxmci_driver, imxmci_probe);
}
static void __exit imxmci_exit(void)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 72f8bde..f48349d 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -24,7 +24,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/hrtimer.h>
+#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/bio.h>
#include <linux/dma-mapping.h>
@@ -95,7 +95,7 @@
* reads which takes nowhere near that long. Older cards may be able to use
* shorter timeouts ... but why bother?
*/
-#define r1b_timeout ktime_set(3, 0)
+#define r1b_timeout (HZ * 3)
/****************************************************************************/
@@ -183,12 +183,11 @@
return status;
}
-static int
-mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte)
+static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout,
+ unsigned n, u8 byte)
{
u8 *cp = host->data->status;
-
- timeout = ktime_add(timeout, ktime_get());
+ unsigned long start = jiffies;
while (1) {
int status;
@@ -203,22 +202,26 @@
return cp[i];
}
- /* REVISIT investigate msleep() to avoid busy-wait I/O
- * in at least some cases.
- */
- if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0)
+ if (time_is_before_jiffies(start + timeout))
break;
+
+ /* If we need long timeouts, we may release the CPU.
+ * We use jiffies here because we want to have a relation
+ * between elapsed time and the blocking of the scheduler.
+ */
+ if (time_is_before_jiffies(start+1))
+ schedule();
}
return -ETIMEDOUT;
}
static inline int
-mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout)
+mmc_spi_wait_unbusy(struct mmc_spi_host *host, unsigned long timeout)
{
return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0);
}
-static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout)
+static int mmc_spi_readtoken(struct mmc_spi_host *host, unsigned long timeout)
{
return mmc_spi_skip(host, timeout, 1, 0xff);
}
@@ -251,6 +254,10 @@
u8 *cp = host->data->status;
u8 *end = cp + host->t.len;
int value = 0;
+ int bitshift;
+ u8 leftover = 0;
+ unsigned short rotator;
+ int i;
char tag[32];
snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
@@ -268,9 +275,8 @@
/* Data block reads (R1 response types) may need more data... */
if (cp == end) {
- unsigned i;
-
cp = host->data->status;
+ end = cp+1;
/* Card sends N(CR) (== 1..8) bytes of all-ones then one
* status byte ... and we already scanned 2 bytes.
@@ -295,20 +301,34 @@
}
checkstatus:
- if (*cp & 0x80) {
- dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n",
- tag, *cp);
- value = -EBADR;
- goto done;
+ bitshift = 0;
+ if (*cp & 0x80) {
+ /* Houston, we have an ugly card with a bit-shifted response */
+ rotator = *cp++ << 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ rotator |= *cp++;
+ while (rotator & 0x8000) {
+ bitshift++;
+ rotator <<= 1;
+ }
+ cmd->resp[0] = rotator >> 8;
+ leftover = rotator;
+ } else {
+ cmd->resp[0] = *cp++;
}
-
- cmd->resp[0] = *cp++;
cmd->error = 0;
/* Status byte: the entire seven-bit R1 response. */
if (cmd->resp[0] != 0) {
if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
- | R1_SPI_ILLEGAL_COMMAND)
+ | R1_SPI_ILLEGAL_COMMAND)
& cmd->resp[0])
value = -EINVAL;
else if (R1_SPI_COM_CRC & cmd->resp[0])
@@ -336,12 +356,45 @@
* SPI R5 == R1 + data byte; IO_RW_DIRECT
*/
case MMC_RSP_SPI_R2:
- cmd->resp[0] |= *cp << 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ if (bitshift) {
+ rotator = leftover << 8;
+ rotator |= *cp << bitshift;
+ cmd->resp[0] |= (rotator & 0xFF00);
+ } else {
+ cmd->resp[0] |= *cp << 8;
+ }
break;
/* SPI R3, R4, or R7 == R1 + 4 bytes */
case MMC_RSP_SPI_R3:
- cmd->resp[1] = get_unaligned_be32(cp);
+ rotator = leftover << 8;
+ cmd->resp[1] = 0;
+ for (i = 0; i < 4; i++) {
+ cmd->resp[1] <<= 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ if (bitshift) {
+ rotator |= *cp++ << bitshift;
+ cmd->resp[1] |= (rotator >> 8);
+ rotator <<= 8;
+ } else {
+ cmd->resp[1] |= *cp++;
+ }
+ }
break;
/* SPI R1 == just one status byte */
@@ -607,7 +660,7 @@
*/
static int
mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t,
- ktime_t timeout)
+ unsigned long timeout)
{
struct spi_device *spi = host->spi;
int status, i;
@@ -717,11 +770,13 @@
*/
static int
mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
- ktime_t timeout)
+ unsigned long timeout)
{
struct spi_device *spi = host->spi;
int status;
struct scratch *scratch = host->data;
+ unsigned int bitshift;
+ u8 leftover;
/* At least one SD card sends an all-zeroes byte when N(CX)
* applies, before the all-ones bytes ... just cope with that.
@@ -733,38 +788,60 @@
if (status == 0xff || status == 0)
status = mmc_spi_readtoken(host, timeout);
- if (status == SPI_TOKEN_SINGLE) {
- if (host->dma_dev) {
- dma_sync_single_for_device(host->dma_dev,
- host->data_dma, sizeof(*scratch),
- DMA_BIDIRECTIONAL);
- dma_sync_single_for_device(host->dma_dev,
- t->rx_dma, t->len,
- DMA_FROM_DEVICE);
- }
-
- status = spi_sync(spi, &host->m);
-
- if (host->dma_dev) {
- dma_sync_single_for_cpu(host->dma_dev,
- host->data_dma, sizeof(*scratch),
- DMA_BIDIRECTIONAL);
- dma_sync_single_for_cpu(host->dma_dev,
- t->rx_dma, t->len,
- DMA_FROM_DEVICE);
- }
-
- } else {
+ if (status < 0) {
dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);
+ return status;
+ }
- /* we've read extra garbage, timed out, etc */
- if (status < 0)
- return status;
+ /* The token may be bit-shifted...
+ * the first 0-bit precedes the data stream.
+ */
+ bitshift = 7;
+ while (status & 0x80) {
+ status <<= 1;
+ bitshift--;
+ }
+ leftover = status << 1;
- /* low four bits are an R2 subset, fifth seems to be
- * vendor specific ... map them all to generic error..
+ if (host->dma_dev) {
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_device(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
+
+ status = spi_sync(spi, &host->m);
+
+ if (host->dma_dev) {
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_cpu(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
+
+ if (bitshift) {
+ /* Walk through the data and the crc and do
+ * all the magic to get byte-aligned data.
*/
- return -EIO;
+ u8 *cp = t->rx_buf;
+ unsigned int len;
+ unsigned int bitright = 8 - bitshift;
+ u8 temp;
+ for (len = t->len; len; len--) {
+ temp = *cp;
+ *cp++ = leftover | (temp >> bitshift);
+ leftover = temp << bitright;
+ }
+ cp = (u8 *) &scratch->crc_val;
+ temp = *cp;
+ *cp++ = leftover | (temp >> bitshift);
+ leftover = temp << bitright;
+ temp = *cp;
+ *cp = leftover | (temp >> bitshift);
}
if (host->mmc->use_spi_crc) {
@@ -803,7 +880,7 @@
unsigned n_sg;
int multiple = (data->blocks > 1);
u32 clock_rate;
- ktime_t timeout;
+ unsigned long timeout;
if (data->flags & MMC_DATA_READ)
direction = DMA_FROM_DEVICE;
@@ -817,8 +894,9 @@
else
clock_rate = spi->max_speed_hz;
- timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns +
- data->timeout_clks * 1000000 / clock_rate);
+ timeout = data->timeout_ns +
+ data->timeout_clks * 1000000 / clock_rate;
+ timeout = usecs_to_jiffies((unsigned int)(timeout / 1000)) + 1;
/* Handle scatterlist segments one at a time, with synch for
* each 512-byte block
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d183be6..e62a22a 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -298,7 +298,6 @@
struct mmc_request *mrq = host->mrq;
host->mrq = NULL;
- mmc_omap_fclk_lazy_disable(host);
mmc_request_done(host->mmc, mrq);
return;
}
@@ -434,6 +433,8 @@
if (host->mrq == NULL) {
OMAP_HSMMC_WRITE(host->base, STAT,
OMAP_HSMMC_READ(host->base, STAT));
+ /* Flush posted write */
+ OMAP_HSMMC_READ(host->base, STAT);
return IRQ_HANDLED;
}
@@ -489,8 +490,10 @@
}
OMAP_HSMMC_WRITE(host->base, STAT, status);
+ /* Flush posted write */
+ OMAP_HSMMC_READ(host->base, STAT);
- if (end_cmd || (status & CC))
+ if (end_cmd || ((status & CC) && host->cmd))
mmc_omap_cmd_done(host, host->cmd);
if (end_trans || (status & TC))
mmc_omap_xfer_done(host, data);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index c5b316e..cd37962 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -729,6 +729,6 @@
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 30d8e3d..9234be2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1935,7 +1935,7 @@
module_param(debug_quirks, uint, 0444);
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index adda379..89bf8cd 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -2036,7 +2036,7 @@
module_param_named(dma, param_dma, int, 0444);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver");
#ifdef CONFIG_PNP
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 45940f3..218b9a1 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -174,8 +174,7 @@
static struct fujitsu_hotkey_t *fujitsu_hotkey;
-static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
- void *data);
+static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event);
#ifdef CONFIG_LEDS_CLASS
static enum led_brightness logolamp_get(struct led_classdev *cdev);
@@ -203,7 +202,7 @@
static u32 dbg_level = 0x03;
#endif
-static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data);
+static void acpi_fujitsu_notify(struct acpi_device *device, u32 event);
/* Fujitsu ACPI interface function */
@@ -658,7 +657,6 @@
static int acpi_fujitsu_add(struct acpi_device *device)
{
- acpi_status status;
acpi_handle handle;
int result = 0;
int state = 0;
@@ -673,20 +671,10 @@
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify, fujitsu);
-
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop;
- }
-
fujitsu->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_stop;
}
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
@@ -743,9 +731,6 @@
end:
err_free_input_dev:
input_free_device(input);
-err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify);
err_stop:
return result;
@@ -753,7 +738,6 @@
static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct fujitsu_t *fujitsu = NULL;
if (!device || !acpi_driver_data(device))
@@ -761,10 +745,6 @@
fujitsu = acpi_driver_data(device);
- status = acpi_remove_notify_handler(fujitsu->acpi_handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify);
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
@@ -775,7 +755,7 @@
/* Brightness notify */
-static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_fujitsu_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode;
@@ -829,15 +809,12 @@
input_report_key(input, keycode, 0);
input_sync(input);
}
-
- return;
}
/* ACPI device for hotkey handling */
static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
{
- acpi_status status;
acpi_handle handle;
int result = 0;
int state = 0;
@@ -854,17 +831,6 @@
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu_hotkey;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify,
- fujitsu_hotkey);
-
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop;
- }
-
/* kfifo */
spin_lock_init(&fujitsu_hotkey->fifo_lock);
fujitsu_hotkey->fifo =
@@ -879,7 +845,7 @@
fujitsu_hotkey->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_free_fifo;
}
snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys),
@@ -975,9 +941,7 @@
end:
err_free_input_dev:
input_free_device(input);
-err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify);
+err_free_fifo:
kfifo_free(fujitsu_hotkey->fifo);
err_stop:
@@ -986,7 +950,6 @@
static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct fujitsu_hotkey_t *fujitsu_hotkey = NULL;
if (!device || !acpi_driver_data(device))
@@ -994,10 +957,6 @@
fujitsu_hotkey = acpi_driver_data(device);
- status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify);
-
fujitsu_hotkey->acpi_handle = NULL;
kfifo_free(fujitsu_hotkey->fifo);
@@ -1005,8 +964,7 @@
return 0;
}
-static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
- void *data)
+static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode, keycode_r;
@@ -1089,8 +1047,6 @@
input_sync(input);
break;
}
-
- return;
}
/* Initialization */
@@ -1107,6 +1063,7 @@
.ops = {
.add = acpi_fujitsu_add,
.remove = acpi_fujitsu_remove,
+ .notify = acpi_fujitsu_notify,
},
};
@@ -1122,6 +1079,7 @@
.ops = {
.add = acpi_fujitsu_hotkey_add,
.remove = acpi_fujitsu_hotkey_remove,
+ .notify = acpi_fujitsu_hotkey_notify,
},
};
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index a5ce4bc..fe7cf01 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -176,6 +176,7 @@
static int acpi_pcc_hotkey_add(struct acpi_device *device);
static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type);
static int acpi_pcc_hotkey_resume(struct acpi_device *device);
+static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id pcc_device_ids[] = {
{ "MAT0012", 0},
@@ -194,6 +195,7 @@
.add = acpi_pcc_hotkey_add,
.remove = acpi_pcc_hotkey_remove,
.resume = acpi_pcc_hotkey_resume,
+ .notify = acpi_pcc_hotkey_notify,
},
};
@@ -271,7 +273,7 @@
union acpi_object *hkey = NULL;
int i;
- status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, 0,
+ status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, NULL,
&buffer);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -527,9 +529,9 @@
return;
}
-static void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event)
{
- struct pcc_acpi *pcc = (struct pcc_acpi *) data;
+ struct pcc_acpi *pcc = acpi_driver_data(device);
switch (event) {
case HKEY_NOTIFY:
@@ -599,7 +601,6 @@
static int acpi_pcc_hotkey_add(struct acpi_device *device)
{
- acpi_status status;
struct pcc_acpi *pcc;
int num_sifr, result;
@@ -640,22 +641,11 @@
goto out_sinf;
}
- /* initialize hotkey input device */
- status = acpi_install_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify, pcc);
-
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
- result = -ENODEV;
- goto out_input;
- }
-
/* initialize backlight */
pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
&pcc_backlight_ops);
if (IS_ERR(pcc->backlight))
- goto out_notify;
+ goto out_input;
if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -680,9 +670,6 @@
out_backlight:
backlight_device_unregister(pcc->backlight);
-out_notify:
- acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify);
out_input:
input_unregister_device(pcc->input_dev);
/* no need to input_free_device() since core input API refcount and
@@ -723,9 +710,6 @@
backlight_device_unregister(pcc->backlight);
- acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify);
-
input_unregister_device(pcc->input_dev);
/* no need to input_free_device() since core input API refcount and
* free()s the device */
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index a90ec5c..d3c92d7 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -914,7 +914,7 @@
/*
* ACPI callbacks
*/
-static void sony_acpi_notify(acpi_handle handle, u32 event, void *data)
+static void sony_nc_notify(struct acpi_device *device, u32 event)
{
u32 ev = event;
@@ -933,7 +933,7 @@
struct sony_nc_event *key_event;
if (sony_call_snc_handle(key_handle, 0x200, &result)) {
- dprintk("sony_acpi_notify, unable to decode"
+ dprintk("sony_nc_notify, unable to decode"
" event 0x%.2x 0x%.2x\n", key_handle,
ev);
/* restore the original event */
@@ -968,7 +968,7 @@
} else
sony_laptop_report_input_event(ev);
- dprintk("sony_acpi_notify, event: 0x%.2x\n", ev);
+ dprintk("sony_nc_notify, event: 0x%.2x\n", ev);
acpi_bus_generate_proc_event(sony_nc_acpi_device, 1, ev);
}
@@ -1276,15 +1276,6 @@
goto outwalk;
}
- status = acpi_install_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify, NULL);
- if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING DRV_PFX "unable to install notify handler (%u)\n", status);
- result = -ENODEV;
- goto outinput;
- }
-
if (acpi_video_backlight_support()) {
printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
@@ -1362,13 +1353,6 @@
if (sony_backlight_device)
backlight_device_unregister(sony_backlight_device);
- status = acpi_remove_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
-
- outinput:
sony_laptop_remove_input();
outwalk:
@@ -1378,7 +1362,6 @@
static int sony_nc_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct sony_nc_value *item;
if (sony_backlight_device)
@@ -1386,12 +1369,6 @@
sony_nc_acpi_device = NULL;
- status = acpi_remove_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
-
for (item = sony_nc_values; item->name; ++item) {
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
@@ -1425,6 +1402,7 @@
.add = sony_nc_add,
.remove = sony_nc_remove,
.resume = sony_nc_resume,
+ .notify = sony_nc_notify,
},
};
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 2f269e11..043b208 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -81,6 +81,7 @@
static int acpi_wmi_remove(struct acpi_device *device, int type);
static int acpi_wmi_add(struct acpi_device *device);
+static void acpi_wmi_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id wmi_device_ids[] = {
{"PNP0C14", 0},
@@ -96,6 +97,7 @@
.ops = {
.add = acpi_wmi_add,
.remove = acpi_wmi_remove,
+ .notify = acpi_wmi_notify,
},
};
@@ -643,12 +645,11 @@
}
}
-static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_wmi_notify(struct acpi_device *device, u32 event)
{
struct guid_block *block;
struct wmi_block *wblock;
struct list_head *p;
- struct acpi_device *device = data;
list_for_each(p, &wmi_blocks.list) {
wblock = list_entry(p, struct wmi_block, list);
@@ -669,9 +670,6 @@
static int acpi_wmi_remove(struct acpi_device *device, int type)
{
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify);
-
acpi_remove_address_space_handler(device->handle,
ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler);
@@ -683,13 +681,6 @@
acpi_status status;
int result = 0;
- status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify, device);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing notify handler\n");
- return -ENODEV;
- }
-
status = acpi_install_address_space_handler(device->handle,
ACPI_ADR_SPACE_EC,
&acpi_wmi_ec_space_handler,
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
new file mode 100644
index 0000000..9fd33e5
--- /dev/null
+++ b/drivers/serial/max3100.c
@@ -0,0 +1,927 @@
+/*
+ *
+ * Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have
+ * to use polling for flow control. TX empty IRQ is unusable, since
+ * writing conf clears FIFO buffer and we cannot have this interrupt
+ * always asking us for attention.
+ *
+ * Example platform data:
+
+ static struct plat_max3100 max3100_plat_data = {
+ .loopback = 0,
+ .crystal = 0,
+ .poll_time = 100,
+ };
+
+ static struct spi_board_info spi_board_info[] = {
+ {
+ .modalias = "max3100",
+ .platform_data = &max3100_plat_data,
+ .irq = IRQ_EINT12,
+ .max_speed_hz = 5*1000*1000,
+ .chip_select = 0,
+ },
+ };
+
+ * The initial minor number is 209 in the low-density serial port:
+ * mknod /dev/ttyMAX0 c 204 209
+ */
+
+#define MAX3100_MAJOR 204
+#define MAX3100_MINOR 209
+/* 4 MAX3100s should be enough for everyone */
+#define MAX_MAX3100 4
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+
+#include <linux/serial_max3100.h>
+
+#define MAX3100_C (1<<14)
+#define MAX3100_D (0<<14)
+#define MAX3100_W (1<<15)
+#define MAX3100_RX (0<<15)
+
+#define MAX3100_WC (MAX3100_W | MAX3100_C)
+#define MAX3100_RC (MAX3100_RX | MAX3100_C)
+#define MAX3100_WD (MAX3100_W | MAX3100_D)
+#define MAX3100_RD (MAX3100_RX | MAX3100_D)
+#define MAX3100_CMD (3 << 14)
+
+#define MAX3100_T (1<<14)
+#define MAX3100_R (1<<15)
+
+#define MAX3100_FEN (1<<13)
+#define MAX3100_SHDN (1<<12)
+#define MAX3100_TM (1<<11)
+#define MAX3100_RM (1<<10)
+#define MAX3100_PM (1<<9)
+#define MAX3100_RAM (1<<8)
+#define MAX3100_IR (1<<7)
+#define MAX3100_ST (1<<6)
+#define MAX3100_PE (1<<5)
+#define MAX3100_L (1<<4)
+#define MAX3100_BAUD (0xf)
+
+#define MAX3100_TE (1<<10)
+#define MAX3100_RAFE (1<<10)
+#define MAX3100_RTS (1<<9)
+#define MAX3100_CTS (1<<9)
+#define MAX3100_PT (1<<8)
+#define MAX3100_DATA (0xff)
+
+#define MAX3100_RT (MAX3100_R | MAX3100_T)
+#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE)
+
+/* the following simulate a status reg for ignore_status_mask */
+#define MAX3100_STATUS_PE 1
+#define MAX3100_STATUS_FE 2
+#define MAX3100_STATUS_OE 4
+
+struct max3100_port {
+ struct uart_port port;
+ struct spi_device *spi;
+
+ int cts; /* last CTS received for flow ctrl */
+ int tx_empty; /* last TX empty bit */
+
+ spinlock_t conf_lock; /* shared data */
+ int conf_commit; /* need to make changes */
+ int conf; /* configuration for the MAX31000
+ * (bits 0-7, bits 8-11 are irqs) */
+ int rts_commit; /* need to change rts */
+ int rts; /* rts status */
+ int baud; /* current baud rate */
+
+ int parity; /* keeps track if we should send parity */
+#define MAX3100_PARITY_ON 1
+#define MAX3100_PARITY_ODD 2
+#define MAX3100_7BIT 4
+ int rx_enabled; /* if we should rx chars */
+
+ int irq; /* irq assigned to the max3100 */
+
+ int minor; /* minor number */
+ int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */
+ int loopback; /* 1 if we are in loopback mode */
+
+ /* for handling irqs: need workqueue since we do spi_sync */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+ /* set to 1 to make the workhandler exit as soon as possible */
+ int force_end_work;
+ /* need to know we are suspending to avoid deadlock on workqueue */
+ int suspending;
+
+ /* hook for suspending MAX3100 via dedicated pin */
+ void (*max3100_hw_suspend) (int suspend);
+
+ /* poll time (in ms) for ctrl lines */
+ int poll_time;
+ /* and its timer */
+ struct timer_list timer;
+};
+
+static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */
+static DEFINE_MUTEX(max3100s_lock); /* race on probe */
+
+static int max3100_do_parity(struct max3100_port *s, u16 c)
+{
+ int parity;
+
+ if (s->parity & MAX3100_PARITY_ODD)
+ parity = 1;
+ else
+ parity = 0;
+
+ if (s->parity & MAX3100_7BIT)
+ c &= 0x7f;
+ else
+ c &= 0xff;
+
+ parity = parity ^ (hweight8(c) & 1);
+ return parity;
+}
+
+static int max3100_check_parity(struct max3100_port *s, u16 c)
+{
+ return max3100_do_parity(s, c) == ((c >> 8) & 1);
+}
+
+static void max3100_calc_parity(struct max3100_port *s, u16 *c)
+{
+ if (s->parity & MAX3100_7BIT)
+ *c &= 0x7f;
+ else
+ *c &= 0xff;
+
+ if (s->parity & MAX3100_PARITY_ON)
+ *c |= max3100_do_parity(s, *c) << 8;
+}
+
+static void max3100_work(struct work_struct *w);
+
+static void max3100_dowork(struct max3100_port *s)
+{
+ if (!s->force_end_work && !work_pending(&s->work) &&
+ !freezing(current) && !s->suspending)
+ queue_work(s->workqueue, &s->work);
+}
+
+static void max3100_timeout(unsigned long data)
+{
+ struct max3100_port *s = (struct max3100_port *)data;
+
+ if (s->port.info) {
+ max3100_dowork(s);
+ mod_timer(&s->timer, jiffies + s->poll_time);
+ }
+}
+
+static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx)
+{
+ struct spi_message message;
+ u16 etx, erx;
+ int status;
+ struct spi_transfer tran = {
+ .tx_buf = &etx,
+ .rx_buf = &erx,
+ .len = 2,
+ };
+
+ etx = cpu_to_be16(tx);
+ spi_message_init(&message);
+ spi_message_add_tail(&tran, &message);
+ status = spi_sync(s->spi, &message);
+ if (status) {
+ dev_warn(&s->spi->dev, "error while calling spi_sync\n");
+ return -EIO;
+ }
+ *rx = be16_to_cpu(erx);
+ s->tx_empty = (*rx & MAX3100_T) > 0;
+ dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx);
+ return 0;
+}
+
+static int max3100_handlerx(struct max3100_port *s, u16 rx)
+{
+ unsigned int ch, flg, status = 0;
+ int ret = 0, cts;
+
+ if (rx & MAX3100_R && s->rx_enabled) {
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff);
+ if (rx & MAX3100_RAFE) {
+ s->port.icount.frame++;
+ flg = TTY_FRAME;
+ status |= MAX3100_STATUS_FE;
+ } else {
+ if (s->parity & MAX3100_PARITY_ON) {
+ if (max3100_check_parity(s, rx)) {
+ s->port.icount.rx++;
+ flg = TTY_NORMAL;
+ } else {
+ s->port.icount.parity++;
+ flg = TTY_PARITY;
+ status |= MAX3100_STATUS_PE;
+ }
+ } else {
+ s->port.icount.rx++;
+ flg = TTY_NORMAL;
+ }
+ }
+ uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg);
+ ret = 1;
+ }
+
+ cts = (rx & MAX3100_CTS) > 0;
+ if (s->cts != cts) {
+ s->cts = cts;
+ uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
+ }
+
+ return ret;
+}
+
+static void max3100_work(struct work_struct *w)
+{
+ struct max3100_port *s = container_of(w, struct max3100_port, work);
+ int rxchars;
+ u16 tx, rx;
+ int conf, cconf, rts, crts;
+ struct circ_buf *xmit = &s->port.info->xmit;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ rxchars = 0;
+ do {
+ spin_lock(&s->conf_lock);
+ conf = s->conf;
+ cconf = s->conf_commit;
+ s->conf_commit = 0;
+ rts = s->rts;
+ crts = s->rts_commit;
+ s->rts_commit = 0;
+ spin_unlock(&s->conf_lock);
+ if (cconf)
+ max3100_sr(s, MAX3100_WC | conf, &rx);
+ if (crts) {
+ max3100_sr(s, MAX3100_WD | MAX3100_TE |
+ (s->rts ? MAX3100_RTS : 0), &rx);
+ rxchars += max3100_handlerx(s, rx);
+ }
+
+ max3100_sr(s, MAX3100_RD, &rx);
+ rxchars += max3100_handlerx(s, rx);
+
+ if (rx & MAX3100_T) {
+ tx = 0xffff;
+ if (s->port.x_char) {
+ tx = s->port.x_char;
+ s->port.icount.tx++;
+ s->port.x_char = 0;
+ } else if (!uart_circ_empty(xmit) &&
+ !uart_tx_stopped(&s->port)) {
+ tx = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ s->port.icount.tx++;
+ }
+ if (tx != 0xffff) {
+ max3100_calc_parity(s, &tx);
+ tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0);
+ max3100_sr(s, tx, &rx);
+ rxchars += max3100_handlerx(s, rx);
+ }
+ }
+
+ if (rxchars > 16 && s->port.info->port.tty != NULL) {
+ tty_flip_buffer_push(s->port.info->port.tty);
+ rxchars = 0;
+ }
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+ } while (!s->force_end_work &&
+ !freezing(current) &&
+ ((rx & MAX3100_R) ||
+ (!uart_circ_empty(xmit) &&
+ !uart_tx_stopped(&s->port))));
+
+ if (rxchars > 0 && s->port.info->port.tty != NULL)
+ tty_flip_buffer_push(s->port.info->port.tty);
+}
+
+static irqreturn_t max3100_irq(int irqno, void *dev_id)
+{
+ struct max3100_port *s = dev_id;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ max3100_dowork(s);
+ return IRQ_HANDLED;
+}
+
+static void max3100_enable_ms(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ if (s->poll_time > 0)
+ mod_timer(&s->timer, jiffies);
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static void max3100_start_tx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ max3100_dowork(s);
+}
+
+static void max3100_stop_rx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ s->rx_enabled = 0;
+ spin_lock(&s->conf_lock);
+ s->conf &= ~MAX3100_RM;
+ s->conf_commit = 1;
+ spin_unlock(&s->conf_lock);
+ max3100_dowork(s);
+}
+
+static unsigned int max3100_tx_empty(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ /* may not be truly up-to-date */
+ max3100_dowork(s);
+ return s->tx_empty;
+}
+
+static unsigned int max3100_get_mctrl(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ /* may not be truly up-to-date */
+ max3100_dowork(s);
+ /* always assert DCD and DSR since these lines are not wired */
+ return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int rts;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ rts = (mctrl & TIOCM_RTS) > 0;
+
+ spin_lock(&s->conf_lock);
+ if (s->rts != rts) {
+ s->rts = rts;
+ s->rts_commit = 1;
+ max3100_dowork(s);
+ }
+ spin_unlock(&s->conf_lock);
+}
+
+static void
+max3100_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int baud = 0;
+ unsigned cflag;
+ u32 param_new, param_mask, parity = 0;
+ struct tty_struct *tty = s->port.info->port.tty;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ if (!tty)
+ return;
+
+ cflag = termios->c_cflag;
+ param_new = 0;
+ param_mask = 0;
+
+ baud = tty_get_baud_rate(tty);
+ param_new = s->conf & MAX3100_BAUD;
+ switch (baud) {
+ case 300:
+ if (s->crystal)
+ baud = s->baud;
+ else
+ param_new = 15;
+ break;
+ case 600:
+ param_new = 14 + s->crystal;
+ break;
+ case 1200:
+ param_new = 13 + s->crystal;
+ break;
+ case 2400:
+ param_new = 12 + s->crystal;
+ break;
+ case 4800:
+ param_new = 11 + s->crystal;
+ break;
+ case 9600:
+ param_new = 10 + s->crystal;
+ break;
+ case 19200:
+ param_new = 9 + s->crystal;
+ break;
+ case 38400:
+ param_new = 8 + s->crystal;
+ break;
+ case 57600:
+ param_new = 1 + s->crystal;
+ break;
+ case 115200:
+ param_new = 0 + s->crystal;
+ break;
+ case 230400:
+ if (s->crystal)
+ param_new = 0;
+ else
+ baud = s->baud;
+ break;
+ default:
+ baud = s->baud;
+ }
+ tty_encode_baud_rate(tty, baud, baud);
+ s->baud = baud;
+ param_mask |= MAX3100_BAUD;
+
+ if ((cflag & CSIZE) == CS8) {
+ param_new &= ~MAX3100_L;
+ parity &= ~MAX3100_7BIT;
+ } else {
+ param_new |= MAX3100_L;
+ parity |= MAX3100_7BIT;
+ cflag = (cflag & ~CSIZE) | CS7;
+ }
+ param_mask |= MAX3100_L;
+
+ if (cflag & CSTOPB)
+ param_new |= MAX3100_ST;
+ else
+ param_new &= ~MAX3100_ST;
+ param_mask |= MAX3100_ST;
+
+ if (cflag & PARENB) {
+ param_new |= MAX3100_PE;
+ parity |= MAX3100_PARITY_ON;
+ } else {
+ param_new &= ~MAX3100_PE;
+ parity &= ~MAX3100_PARITY_ON;
+ }
+ param_mask |= MAX3100_PE;
+
+ if (cflag & PARODD)
+ parity |= MAX3100_PARITY_ODD;
+ else
+ parity &= ~MAX3100_PARITY_ODD;
+
+ /* mask termios capabilities we don't support */
+ cflag &= ~CMSPAR;
+ termios->c_cflag = cflag;
+
+ s->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ s->port.ignore_status_mask |=
+ MAX3100_STATUS_PE | MAX3100_STATUS_FE |
+ MAX3100_STATUS_OE;
+
+ /* we are sending char from a workqueue so enable */
+ s->port.info->port.tty->low_latency = 1;
+
+ if (s->poll_time > 0)
+ del_timer_sync(&s->timer);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_lock(&s->conf_lock);
+ s->conf = (s->conf & ~param_mask) | (param_new & param_mask);
+ s->conf_commit = 1;
+ s->parity = parity;
+ spin_unlock(&s->conf_lock);
+ max3100_dowork(s);
+
+ if (UART_ENABLE_MS(&s->port, termios->c_cflag))
+ max3100_enable_ms(&s->port);
+}
+
+static void max3100_shutdown(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (s->suspending)
+ return;
+
+ s->force_end_work = 1;
+
+ if (s->poll_time > 0)
+ del_timer_sync(&s->timer);
+
+ if (s->workqueue) {
+ flush_workqueue(s->workqueue);
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ }
+ if (s->irq)
+ free_irq(s->irq, s);
+
+ /* set shutdown mode to save power */
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(1);
+ else {
+ u16 tx, rx;
+
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(s, tx, &rx);
+ }
+}
+
+static int max3100_startup(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ char b[12];
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ s->conf = MAX3100_RM;
+ s->baud = s->crystal ? 230400 : 115200;
+ s->rx_enabled = 1;
+
+ if (s->suspending)
+ return 0;
+
+ s->force_end_work = 0;
+ s->parity = 0;
+ s->rts = 0;
+
+ sprintf(b, "max3100-%d", s->minor);
+ s->workqueue = create_freezeable_workqueue(b);
+ if (!s->workqueue) {
+ dev_warn(&s->spi->dev, "cannot create workqueue\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&s->work, max3100_work);
+
+ if (request_irq(s->irq, max3100_irq,
+ IRQF_TRIGGER_FALLING, "max3100", s) < 0) {
+ dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq);
+ s->irq = 0;
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ return -EBUSY;
+ }
+
+ if (s->loopback) {
+ u16 tx, rx;
+ tx = 0x4001;
+ max3100_sr(s, tx, &rx);
+ }
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(0);
+ s->conf_commit = 1;
+ max3100_dowork(s);
+ /* wait for clock to settle */
+ msleep(50);
+
+ max3100_enable_ms(&s->port);
+
+ return 0;
+}
+
+static const char *max3100_type(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL;
+}
+
+static void max3100_release_port(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static void max3100_config_port(struct uart_port *port, int flags)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (flags & UART_CONFIG_TYPE)
+ s->port.type = PORT_MAX3100;
+}
+
+static int max3100_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int ret = -EINVAL;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100)
+ ret = 0;
+ return ret;
+}
+
+static void max3100_stop_tx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static int max3100_request_port(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ return 0;
+}
+
+static void max3100_break_ctl(struct uart_port *port, int break_state)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static struct uart_ops max3100_ops = {
+ .tx_empty = max3100_tx_empty,
+ .set_mctrl = max3100_set_mctrl,
+ .get_mctrl = max3100_get_mctrl,
+ .stop_tx = max3100_stop_tx,
+ .start_tx = max3100_start_tx,
+ .stop_rx = max3100_stop_rx,
+ .enable_ms = max3100_enable_ms,
+ .break_ctl = max3100_break_ctl,
+ .startup = max3100_startup,
+ .shutdown = max3100_shutdown,
+ .set_termios = max3100_set_termios,
+ .type = max3100_type,
+ .release_port = max3100_release_port,
+ .request_port = max3100_request_port,
+ .config_port = max3100_config_port,
+ .verify_port = max3100_verify_port,
+};
+
+static struct uart_driver max3100_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyMAX",
+ .dev_name = "ttyMAX",
+ .major = MAX3100_MAJOR,
+ .minor = MAX3100_MINOR,
+ .nr = MAX_MAX3100,
+};
+static int uart_driver_registered;
+
+static int __devinit max3100_probe(struct spi_device *spi)
+{
+ int i, retval;
+ struct plat_max3100 *pdata;
+ u16 tx, rx;
+
+ mutex_lock(&max3100s_lock);
+
+ if (!uart_driver_registered) {
+ uart_driver_registered = 1;
+ retval = uart_register_driver(&max3100_uart_driver);
+ if (retval) {
+ printk(KERN_ERR "Couldn't register max3100 uart driver\n");
+ mutex_unlock(&max3100s_lock);
+ return retval;
+ }
+ }
+
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (!max3100s[i])
+ break;
+ if (i == MAX_MAX3100) {
+ dev_warn(&spi->dev, "too many MAX3100 chips\n");
+ mutex_unlock(&max3100s_lock);
+ return -ENOMEM;
+ }
+
+ max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL);
+ if (!max3100s[i]) {
+ dev_warn(&spi->dev,
+ "kmalloc for max3100 structure %d failed!\n", i);
+ mutex_unlock(&max3100s_lock);
+ return -ENOMEM;
+ }
+ max3100s[i]->spi = spi;
+ max3100s[i]->irq = spi->irq;
+ spin_lock_init(&max3100s[i]->conf_lock);
+ dev_set_drvdata(&spi->dev, max3100s[i]);
+ pdata = spi->dev.platform_data;
+ max3100s[i]->crystal = pdata->crystal;
+ max3100s[i]->loopback = pdata->loopback;
+ max3100s[i]->poll_time = pdata->poll_time * HZ / 1000;
+ if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0)
+ max3100s[i]->poll_time = 1;
+ max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend;
+ max3100s[i]->minor = i;
+ init_timer(&max3100s[i]->timer);
+ max3100s[i]->timer.function = max3100_timeout;
+ max3100s[i]->timer.data = (unsigned long) max3100s[i];
+
+ dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
+ max3100s[i]->port.irq = max3100s[i]->irq;
+ max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200;
+ max3100s[i]->port.fifosize = 16;
+ max3100s[i]->port.ops = &max3100_ops;
+ max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ max3100s[i]->port.line = i;
+ max3100s[i]->port.type = PORT_MAX3100;
+ max3100s[i]->port.dev = &spi->dev;
+ retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port);
+ if (retval < 0)
+ dev_warn(&spi->dev,
+ "uart_add_one_port failed for line %d with error %d\n",
+ i, retval);
+
+ /* set shutdown mode to save power. Will be woken-up on open */
+ if (max3100s[i]->max3100_hw_suspend)
+ max3100s[i]->max3100_hw_suspend(1);
+ else {
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(max3100s[i], tx, &rx);
+ }
+ mutex_unlock(&max3100s_lock);
+ return 0;
+}
+
+static int __devexit max3100_remove(struct spi_device *spi)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+ int i;
+
+ mutex_lock(&max3100s_lock);
+
+ /* find out the index for the chip we are removing */
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (max3100s[i] == s)
+ break;
+
+ dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i);
+ uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port);
+ kfree(max3100s[i]);
+ max3100s[i] = NULL;
+
+ /* check if this is the last chip we have */
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (max3100s[i]) {
+ mutex_unlock(&max3100s_lock);
+ return 0;
+ }
+ pr_debug("removing max3100 driver\n");
+ uart_unregister_driver(&max3100_uart_driver);
+
+ mutex_unlock(&max3100s_lock);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int max3100_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ disable_irq(s->irq);
+
+ s->suspending = 1;
+ uart_suspend_port(&max3100_uart_driver, &s->port);
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(1);
+ else {
+ /* no HW suspend, so do SW one */
+ u16 tx, rx;
+
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(s, tx, &rx);
+ }
+ return 0;
+}
+
+static int max3100_resume(struct spi_device *spi)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(0);
+ uart_resume_port(&max3100_uart_driver, &s->port);
+ s->suspending = 0;
+
+ enable_irq(s->irq);
+
+ s->conf_commit = 1;
+ if (s->workqueue)
+ max3100_dowork(s);
+
+ return 0;
+}
+
+#else
+#define max3100_suspend NULL
+#define max3100_resume NULL
+#endif
+
+static struct spi_driver max3100_driver = {
+ .driver = {
+ .name = "max3100",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = max3100_probe,
+ .remove = __devexit_p(max3100_remove),
+ .suspend = max3100_suspend,
+ .resume = max3100_resume,
+};
+
+static int __init max3100_init(void)
+{
+ return spi_register_driver(&max3100_driver);
+}
+module_init(max3100_init);
+
+static void __exit max3100_exit(void)
+{
+ spi_unregister_driver(&max3100_driver);
+}
+module_exit(max3100_exit);
+
+MODULE_DESCRIPTION("MAX3100 driver");
+MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 4ed228a..bb5e6f6 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -280,7 +280,7 @@
* are always powered while this driver is active, and use
* active-low power switches.
*/
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
@@ -298,7 +298,7 @@
int i;
if (pdata) {
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_direction_output(pdata->vbus_pin[i], 1);
diff --git a/fs/befs/super.c b/fs/befs/super.c
index 41f2b4d..ca40f82 100644
--- a/fs/befs/super.c
+++ b/fs/befs/super.c
@@ -8,6 +8,7 @@
*/
#include <linux/fs.h>
+#include <asm/page.h> /* for PAGE_SIZE */
#include "befs.h"
#include "super.h"
diff --git a/fs/buffer.c b/fs/buffer.c
index 6e35762..13edf7a 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1596,6 +1596,16 @@
* locked buffer. This only can happen if someone has written the buffer
* directly, with submit_bh(). At the address_space level PageWriteback
* prevents this contention from occurring.
+ *
+ * If block_write_full_page() is called with wbc->sync_mode ==
+ * WB_SYNC_ALL, the writes are posted using WRITE_SYNC_PLUG; this
+ * causes the writes to be flagged as synchronous writes, but the
+ * block device queue will NOT be unplugged, since usually many pages
+ * will be pushed to the out before the higher-level caller actually
+ * waits for the writes to be completed. The various wait functions,
+ * such as wait_on_writeback_range() will ultimately call sync_page()
+ * which will ultimately call blk_run_backing_dev(), which will end up
+ * unplugging the device queue.
*/
static int __block_write_full_page(struct inode *inode, struct page *page,
get_block_t *get_block, struct writeback_control *wbc)
@@ -1606,7 +1616,8 @@
struct buffer_head *bh, *head;
const unsigned blocksize = 1 << inode->i_blkbits;
int nr_underway = 0;
- int write_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE);
+ int write_op = (wbc->sync_mode == WB_SYNC_ALL ?
+ WRITE_SYNC_PLUG : WRITE);
BUG_ON(!PageLocked(page));
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 466a332..fcfa243 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1521,12 +1521,16 @@
if (!page_has_buffers(page)) {
create_empty_buffers(page, inode->i_sb->s_blocksize,
(1 << BH_Dirty)|(1 << BH_Uptodate));
- } else if (!walk_page_buffers(NULL, page_buffers(page), 0, PAGE_CACHE_SIZE, NULL, buffer_unmapped)) {
- /* Provide NULL instead of get_block so that we catch bugs if buffers weren't really mapped */
- return block_write_full_page(page, NULL, wbc);
+ page_bufs = page_buffers(page);
+ } else {
+ page_bufs = page_buffers(page);
+ if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE,
+ NULL, buffer_unmapped)) {
+ /* Provide NULL get_block() to catch bugs if buffers
+ * weren't really mapped */
+ return block_write_full_page(page, NULL, wbc);
+ }
}
- page_bufs = page_buffers(page);
-
handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
@@ -1581,6 +1585,15 @@
if (ext3_journal_current_handle())
goto out_fail;
+ if (page_has_buffers(page)) {
+ if (!walk_page_buffers(NULL, page_buffers(page), 0,
+ PAGE_CACHE_SIZE, NULL, buffer_unmapped)) {
+ /* Provide NULL get_block() to catch bugs if buffers
+ * weren't really mapped */
+ return block_write_full_page(page, NULL, wbc);
+ }
+ }
+
handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 12c2037..64a72e2 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -135,7 +135,7 @@
struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
dev = inode->i_sb->s_dev;
ino = inode->i_ino;
- pgoff = (loff_t)vma->pg_off << PAGE_SHIFT;
+ pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
}
seq_printf(m,
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index a222851..c34b110 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -270,7 +270,6 @@
struct list_head children;
struct list_head node;
struct list_head wakeup_list;
- struct list_head g_list;
struct acpi_device_status status;
struct acpi_device_flags flags;
struct acpi_device_pnp pnp;
diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h
new file mode 100644
index 0000000..4976bef
--- /dev/null
+++ b/include/linux/serial_max3100.h
@@ -0,0 +1,52 @@
+/*
+ *
+ * Copyright (C) 2007 Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#ifndef _LINUX_SERIAL_MAX3100_H
+#define _LINUX_SERIAL_MAX3100_H 1
+
+
+/**
+ * struct plat_max3100 - MAX3100 SPI UART platform data
+ * @loopback: force MAX3100 in loopback
+ * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
+ * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook
+ * called on suspend and resume to activate it.
+ * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
+ * flow ctrl is possible but you have less CPU usage)
+ *
+ * You should use this structure in your machine description to specify
+ * how the MAX3100 is connected. Example:
+ *
+ * static struct plat_max3100 max3100_plat_data = {
+ * .loopback = 0,
+ * .crystal = 0,
+ * .poll_time = 100,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ * {
+ * .modalias = "max3100",
+ * .platform_data = &max3100_plat_data,
+ * .irq = IRQ_EINT12,
+ * .max_speed_hz = 5*1000*1000,
+ * .chip_select = 0,
+ * },
+ * };
+ *
+ **/
+struct plat_max3100 {
+ int loopback;
+ int crystal;
+ void (*max3100_hw_suspend) (int suspend);
+ int poll_time;
+};
+
+#endif
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index aaad0ec..64191fa 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -21,9 +21,7 @@
#include <linux/audit.h>
#include <linux/pid_namespace.h>
#include <linux/syscalls.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
/*
@@ -48,7 +46,7 @@
list_add(&child->ptrace_entry, &new_parent->ptraced);
child->parent = new_parent;
}
-
+
/*
* Turn a tracing stop into a normal stop now, since with no tracer there
* would be no way to wake it up with SIGCONT or SIGKILL. If there was a
@@ -173,7 +171,7 @@
task_lock(task);
err = __ptrace_may_access(task, mode);
task_unlock(task);
- return (!err ? true : false);
+ return !err;
}
int ptrace_attach(struct task_struct *task)
@@ -358,7 +356,7 @@
copied += retval;
src += retval;
dst += retval;
- len -= retval;
+ len -= retval;
}
return copied;
}
@@ -383,7 +381,7 @@
copied += retval;
src += retval;
dst += retval;
- len -= retval;
+ len -= retval;
}
return copied;
}
@@ -496,9 +494,9 @@
if (unlikely(!arch_has_single_step()))
return -EIO;
user_enable_single_step(child);
- }
- else
+ } else {
user_disable_single_step(child);
+ }
child->exit_code = data;
wake_up_process(child);