[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*
First move of items out of include/asm-arm/plat-s3c* to their
new homes under arch/arm/plat-s3c/include/plat and
arch/arm/plat-s3c24xx/include/plat directories.
Note, we have to create a dummy arch/arm/plat-s3c/Makefile to
allow us to add arch/arm/plat-s3c/include/plat to the path.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 703a44f..0e97f5c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -120,7 +120,7 @@
machine-$(CONFIG_ARCH_OMAP2) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
+ plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index c66021b..cfa8da5 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -38,7 +38,7 @@
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/irq.h>
#if 0
#include <asm/debug-ll.h>
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 1322851..f0172d2 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -37,13 +37,13 @@
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
int s3c2410_clkcon_enable(struct clk *clk, int enable)
{
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8730797..99b6d68 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -20,10 +20,10 @@
#include <asm/dma.h>
#include <mach/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 682df23..4c29a89 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
@@ -99,4 +99,4 @@
/* include the reset of the code which will do the work */
-#include <asm/plat-s3c/debug-macro.S>
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index f5c5c53..9215039 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -25,8 +25,8 @@
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static int s3c2410_irq_add(struct sys_device *sysdev)
{
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index f0de3c2..c7936c1 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -48,12 +48,12 @@
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 24c6334..a01e3d3 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -39,7 +39,7 @@
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
@@ -56,8 +56,8 @@
#include <linux/serial_8250.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index e35933a..f9538d1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -30,7 +30,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
@@ -41,9 +41,9 @@
#include <asm/plat-s3c24xx/udc.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 80fe2ed..f9cc338 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -41,12 +41,12 @@
#include <asm/mach/map.h>
#include <asm/plat-s3c/iic.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/udc.h>
static struct map_desc n30_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 606ee15..d49dbb0 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -29,13 +29,13 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 7d34844..c327725 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -49,7 +49,7 @@
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c24xx/udc.h>
@@ -57,9 +57,9 @@
#include <mach/spi-gpio.h>
#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index b88939d..6d94064 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -46,10 +46,10 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index ec87306..773abd4 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -44,9 +44,9 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index fbc0213..41a2a0e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -40,13 +40,13 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ba43ff9..b026cc8 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -34,8 +34,8 @@
#include <mach/regs-gpio.h>
#include <mach/h1940.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#ifdef CONFIG_S3C2410_PM_DEBUG
extern void pm_dbg(const char *fmt, ...);
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 5d977f9..97173d3 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -29,11 +29,11 @@
#include <asm/irq.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/s3c2410.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
/* Initial IO mappings */
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index be37f22..dd5b638 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -32,7 +32,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
/* s3c2410_cpu_suspend
*
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 4dacf8a..a8a2c28 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -35,7 +35,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/devs.h>
#include "usb-simtec.h"
/* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index af4b2ce..8b3382d 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -37,13 +37,13 @@
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 22fc04a..d4af572 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -22,9 +22,9 @@
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index ac62b79..936fac7 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -35,9 +35,9 @@
#include <mach/regs-gpio.h>
#include <mach/regs-power.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/irq.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/irq.h>
+#include <plat/pm.h>
#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index ad980a1..246c6db 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -30,7 +30,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c/iic.h>
@@ -49,9 +49,9 @@
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#include <asm/plat-s3c24xx/udc.h>
static struct map_desc jive_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 80affb1..ae8dea1 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
@@ -40,11 +40,11 @@
#include <asm/plat-s3c24xx/udc.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 7a08b37..4e84d40 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -33,7 +33,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
@@ -42,11 +42,11 @@
#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc vstms_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 737523a..3e5575f 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -28,8 +28,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
#include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index d278010..4262de0 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -34,7 +34,7 @@
#include <mach/idle.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
@@ -43,10 +43,10 @@
#include <mach/regs-s3c2412.h>
#include <asm/plat-s3c24xx/s3c2412.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 95567e6..bb1101f 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -42,7 +42,7 @@
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* S3C2440 extended clock support */
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index cdd4e6e..b674f86 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -21,9 +21,9 @@
#include <mach/dma.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index c0c6743..a0d49a9 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -27,8 +27,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/cpu.h>
+#include <plat/s3c2440.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 276b823..a23cffb 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -34,9 +34,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* WDT/AC97 */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 441f4bc..a37f8b2 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -36,7 +36,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
@@ -50,8 +50,8 @@
#include <net/ax88796.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f0f0cc6..5114b87 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -31,7 +31,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
@@ -43,8 +43,8 @@
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 1a5e702..9d82595 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -36,13 +36,13 @@
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8b83f93..5b1c32e 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -33,7 +33,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
@@ -45,8 +45,8 @@
#include <linux/mtd/partitions.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
/* onboard perihperal map */
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e0b07e6..46128a1 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -38,7 +38,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
@@ -47,9 +47,9 @@
#include <mach/fb.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 327c8f3..e1799ab 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -31,18 +31,18 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d6b9a92..52e527e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2440.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 569b5c3..075db28 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -42,7 +42,7 @@
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* S3C2442 extended clock support */
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index fbf8264..4663bdc 100644
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -19,8 +19,8 @@
#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2442.h>
+#include <plat/cpu.h>
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 6a8d7cc..ce56b51 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -39,9 +39,9 @@
#include <mach/regs-s3c2443-clock.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2443.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index c1ff03a..e75b6e3 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -22,9 +22,9 @@
#include <asm/io.h>
#include <asm/plat-s3c24xx/dma.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c/regs-ac97.h>
#include <mach/regs-mem.h>
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 9674de7..0e00809 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -34,9 +34,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index e3c0d58..b1d5637 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -31,18 +31,18 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
#include <mach/fb.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/common-smdk.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 37793f9..f1d1f8e 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -32,9 +32,9 @@
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2443.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
new file mode 100644
index 0000000..f03d7b3
--- /dev/null
+++ b/arch/arm/plat-s3c/Makefile
@@ -0,0 +1,3 @@
+# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+
+obj-n := dummy.o
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
new file mode 100644
index 0000000..4aa7e2e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/debug-macro.S
@@ -0,0 +1,75 @@
+/* linux/include/asm-arm/plat-s3c/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+ .macro fifo_level_s3c2440 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ and \rd, \rd, #S3C2440_UFSTAT_TXMASK
+ .endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2410
+#endif
+
+ .macro fifo_full_s3c2440 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ tst \rd, #S3C2440_UFSTAT_TXFULL
+ .endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, # S3C2410_UTXH ]
+ .endm
+
+ .macro busyuart, rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFCON ]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ fifo_full \rd, \rx
+ bne 1003b
+ b 1002f
+
+1001:
+ @ busy waiting for non fifo
+ ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm
+
+ .macro waituart,rd,rx
+ ldr \rd, [ \rx, # S3C2410_UFCON ]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ fifo_level \rd, \rx
+ teq \rd, #0
+ bne 1003b
+ b 1002f
+1001:
+ @ idle waiting for non fifo
+ ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
new file mode 100644
index 0000000..a0daa64
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -0,0 +1,232 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ * From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ * Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ * Adapted from:
+ *
+ * Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0 (S3C_VA_UART)
+#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 )
+
+#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
+
+#define S3C2410_URXH (0x24)
+#define S3C2410_UTXH (0x20)
+#define S3C2410_ULCON (0x00)
+#define S3C2410_UCON (0x04)
+#define S3C2410_UFCON (0x08)
+#define S3C2410_UMCON (0x0C)
+#define S3C2410_UBRDIV (0x28)
+#define S3C2410_UTRSTAT (0x10)
+#define S3C2410_UERSTAT (0x14)
+#define S3C2410_UFSTAT (0x18)
+#define S3C2410_UMSTAT (0x1C)
+
+#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5 (0x0)
+#define S3C2410_LCON_CS6 (0x1)
+#define S3C2410_LCON_CS7 (0x2)
+#define S3C2410_LCON_CS8 (0x3)
+#define S3C2410_LCON_CSMASK (0x3)
+
+#define S3C2410_LCON_PNONE (0x0)
+#define S3C2410_LCON_PEVEN (0x5 << 3)
+#define S3C2410_LCON_PODD (0x4 << 3)
+#define S3C2410_LCON_PMASK (0x7 << 3)
+
+#define S3C2410_LCON_STOPB (1<<2)
+#define S3C2410_LCON_IRM (1<<6)
+
+#define S3C2440_UCON_CLKMASK (3<<10)
+#define S3C2440_UCON_PCLK (0<<10)
+#define S3C2440_UCON_UCLK (1<<10)
+#define S3C2440_UCON_PCLK2 (2<<10)
+#define S3C2440_UCON_FCLK (3<<10)
+#define S3C2443_UCON_EPLL (3<<10)
+
+#define S3C2440_UCON2_FCLK_EN (1<<15)
+#define S3C2440_UCON0_DIVMASK (15 << 12)
+#define S3C2440_UCON1_DIVMASK (15 << 12)
+#define S3C2440_UCON2_DIVMASK (7 << 12)
+#define S3C2440_UCON_DIVSHIFT (12)
+
+#define S3C2412_UCON_CLKMASK (3<<10)
+#define S3C2412_UCON_UCLK (1<<10)
+#define S3C2412_UCON_USYSCLK (3<<10)
+#define S3C2412_UCON_PCLK (0<<10)
+#define S3C2412_UCON_PCLK2 (2<<10)
+
+#define S3C2410_UCON_UCLK (1<<10)
+#define S3C2410_UCON_SBREAK (1<<4)
+
+#define S3C2410_UCON_TXILEVEL (1<<9)
+#define S3C2410_UCON_RXILEVEL (1<<8)
+#define S3C2410_UCON_TXIRQMODE (1<<2)
+#define S3C2410_UCON_RXIRQMODE (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN (1<<6)
+#define S3C2443_UCON_LOOPBACK (1<<5)
+
+#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE (1<<0)
+#define S3C2410_UFCON_TXTRIG0 (0<<6)
+#define S3C2410_UFCON_RXTRIG8 (1<<4)
+#define S3C2410_UFCON_RXTRIG12 (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1 (0<<4)
+#define S3C2440_UFCON_RXTRIG8 (1<<4)
+#define S3C2440_UFCON_RXTRIG16 (2<<4)
+#define S3C2440_UFCON_RXTRIG32 (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0 (0<<6)
+#define S3C2440_UFCON_TXTRIG16 (1<<6)
+#define S3C2440_UFCON_TXTRIG32 (2<<6)
+#define S3C2440_UFCON_TXTRIG48 (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH (3<<1)
+#define S3C2410_UFCON_RESETTX (1<<2)
+#define S3C2410_UFCON_RESETRX (1<<1)
+
+#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2410_UFCON_TXTRIG0 | \
+ S3C2410_UFCON_RXTRIG8 )
+
+#define S3C2410_UMCOM_AFC (1<<4)
+#define S3C2410_UMCOM_RTS_LOW (1<<0)
+
+#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */
+#define S3C2412_UMCON_AFC_56 (1<<5)
+#define S3C2412_UMCON_AFC_48 (2<<5)
+#define S3C2412_UMCON_AFC_40 (3<<5)
+#define S3C2412_UMCON_AFC_32 (4<<5)
+#define S3C2412_UMCON_AFC_24 (5<<5)
+#define S3C2412_UMCON_AFC_16 (6<<5)
+#define S3C2412_UMCON_AFC_8 (7<<5)
+
+#define S3C2410_UFSTAT_TXFULL (1<<9)
+#define S3C2410_UFSTAT_RXFULL (1<<8)
+#define S3C2410_UFSTAT_TXMASK (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT (4)
+#define S3C2410_UFSTAT_RXMASK (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT (0)
+
+/* UFSTAT S3C2443 same as S3C2440 */
+#define S3C2440_UFSTAT_TXFULL (1<<14)
+#define S3C2440_UFSTAT_RXFULL (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT (8)
+#define S3C2440_UFSTAT_RXSHIFT (0)
+#define S3C2440_UFSTAT_TXMASK (63<<8)
+#define S3C2440_UFSTAT_RXMASK (63)
+
+#define S3C2410_UTRSTAT_TXE (1<<2)
+#define S3C2410_UTRSTAT_TXFE (1<<1)
+#define S3C2410_UTRSTAT_RXDR (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN (1<<0)
+#define S3C2410_UERSTAT_FRAME (1<<2)
+#define S3C2410_UERSTAT_BREAK (1<<3)
+#define S3C2443_UERSTAT_PARITY (1<<1)
+
+#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \
+ S3C2410_UERSTAT_FRAME | \
+ S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS (1<<2)
+
+#define S3C2443_DIVSLOT (0x2C)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+ unsigned char hwport; /* hardware port number */
+ unsigned char unused;
+ unsigned short flags;
+ upf_t uart_flags; /* default uart flags */
+
+ unsigned long ucon; /* value of ucon for port */
+ unsigned long ulcon; /* value of ulcon for port */
+ unsigned long ufcon; /* value of ufcon for port */
+
+ struct s3c24xx_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[3];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
new file mode 100644
index 0000000..cc0eedd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-timer.h
@@ -0,0 +1,115 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+*/
+
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
+#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0 S3C_TIMERREG(0x00)
+#define S3C2410_TCFG1 S3C_TIMERREG(0x04)
+#define S3C2410_TCON S3C_TIMERREG(0x08)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2 (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4 (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8 (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16 (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2 (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4 (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8 (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16 (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2 (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4 (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8 (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16 (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2 (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4 (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8 (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16 (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2 (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4 (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8 (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16 (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK (15<<0)
+
+#define S3C2410_TCFG1_MUX_DIV2 (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4 (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8 (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16 (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK (4<<0)
+#define S3C2410_TCFG1_MUX_MASK (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x) ((x) * 4)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD (1<<22)
+#define S3C2410_TCON_T4MANUALUPD (1<<21)
+#define S3C2410_TCON_T4START (1<<20)
+
+#define S3C2410_TCON_T3RELOAD (1<<19)
+#define S3C2410_TCON_T3INVERT (1<<18)
+#define S3C2410_TCON_T3MANUALUPD (1<<17)
+#define S3C2410_TCON_T3START (1<<16)
+
+#define S3C2410_TCON_T2RELOAD (1<<15)
+#define S3C2410_TCON_T2INVERT (1<<14)
+#define S3C2410_TCON_T2MANUALUPD (1<<13)
+#define S3C2410_TCON_T2START (1<<12)
+
+#define S3C2410_TCON_T1RELOAD (1<<11)
+#define S3C2410_TCON_T1INVERT (1<<10)
+#define S3C2410_TCON_T1MANUALUPD (1<<9)
+#define S3C2410_TCON_T1START (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE (1<<4)
+#define S3C2410_TCON_T0RELOAD (1<<3)
+#define S3C2410_TCON_T0INVERT (1<<2)
+#define S3C2410_TCON_T0MANUALUPD (1<<1)
+#define S3C2410_TCON_T0START (1<<0)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
+
+
+
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 54d4b8e..80fb82f 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -48,7 +48,7 @@
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
/* clock information */
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1863a1b..32490fa 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -41,8 +41,8 @@
#include <asm/plat-s3c/nand.h>
#include <asm/plat-s3c24xx/common-smdk.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
/* LED devices */
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 89ce60e..abddadd 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -42,18 +42,18 @@
#include <mach/system-reset.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/devs.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/s3c2400.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
+#include <plat/s3c2400.h>
+#include <plat/s3c2410.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include "s3c244x.h"
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/s3c2442.h>
-#include <asm/plat-s3c24xx/s3c2443.h>
+#include <plat/s3c2440.h>
+#include <plat/s3c2442.h>
+#include <plat/s3c2443.h>
struct cpu_table {
unsigned long idcode;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index d6fb765..8cf4b1b 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -28,11 +28,11 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <asm/plat-s3c24xx/udc.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
#include <asm/plat-s3c24xx/regs-spi.h>
/* Serial port registrations */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c24xx/include/plat/cpu.h
new file mode 100644
index 0000000..23e420e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu.h
@@ -0,0 +1,54 @@
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+ struct s3c24xx_uart_resources *res,
+ struct s3c2410_uartcfg *cfg, int no);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c24xx/include/plat/devs.h
new file mode 100644
index 0000000..badaac9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/devs.h
@@ -0,0 +1,49 @@
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+ struct resource *resources;
+ unsigned long nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_timer[];
+
+extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hsmmc;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s3c_device_nand;
+
+extern struct platform_device s3c_device_usbgadget;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
new file mode 100644
index 0000000..45746a9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -0,0 +1,109 @@
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+/* these are exported for arch/arm/mach-* usage */
+extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+ int subcheck)
+{
+ unsigned long mask;
+ unsigned long submask;
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+ /* check to see if we need to mask the parent IRQ */
+
+ if ((submask & subcheck) == subcheck) {
+ __raw_writel(mask | parentbit, S3C2410_INTMSK);
+ }
+
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+ unsigned long mask;
+ unsigned long submask;
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+ mask &= ~parentbit;
+
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+ unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+ s3c_irqsub_mask(irqno, parentmask, group);
+
+ __raw_writel(bit, S3C2410_SUBSRCPND);
+
+ /* only ack parent if we've got all the irqs (seems we must
+ * ack, all and hope that the irq system retriggers ok when
+ * the interrupt goes off again)
+ */
+
+ if (1) {
+ __raw_writel(parentmask, S3C2410_SRCPND);
+ __raw_writel(parentmask, S3C2410_INTPND);
+ }
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+ unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+ __raw_writel(bit, S3C2410_SUBSRCPND);
+
+ /* only ack parent if we've got all the irqs (seems we must
+ * ack, all and hope that the irq system retriggers ok when
+ * the interrupt goes off again)
+ */
+
+ if (1) {
+ __raw_writel(parentmask, S3C2410_SRCPND);
+ __raw_writel(parentmask, S3C2410_INTPND);
+ }
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h
new file mode 100644
index 0000000..cc62366
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
new file mode 100644
index 0000000..3a5a168
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 09-Fev-2006 LCVR First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
new file mode 100644
index 0000000..3cd1ec6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern int s3c2410_init(void);
+
+extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
new file mode 100644
index 0000000..107853b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
new file mode 100644
index 0000000..451a23a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
new file mode 100644
index 0000000..11d83b5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 36cefe1..25d53249 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -65,9 +65,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* wakeup irq control */
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index e670501..ef60297 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -33,7 +33,7 @@
#include <asm/mach-types.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index fc4b731..d937ff1 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -40,7 +40,7 @@
#include <mach/hardware.h>
#include <asm/io.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
@@ -48,7 +48,7 @@
#include <asm/mach/time.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/pm.h>
/* for external use */
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 306cc9c..245270b 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -25,9 +25,9 @@
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
/* Each of the timers 0 through 5 go through the following
* clock tree, with the inputs depending on the timers.
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 7a92c93..feb770f 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,8 +19,8 @@
#include <linux/io.h>
#include <linux/pwm.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
struct pwm_device {
struct list_head list;
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 8a5fffd..2a8d7ca 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -42,7 +42,7 @@
#include <mach/regs-clock.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
{
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index f3dc38c..3520a09 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -34,9 +34,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
-#include <asm/plat-s3c24xx/irq.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
/* camera irq */
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 281b480..793e0ca 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -30,18 +30,18 @@
#include <asm/irq.h>
#include <mach/regs-clock.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
#include "s3c244x.h"
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
-#include <asm/plat-s3c24xx/pm.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 4981a08..76594b2 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -32,7 +32,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
-#include <asm/plat-s3c/regs-serial.h>
+#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index b471a21..71c65c9 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -33,12 +33,12 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <mach/map.h>
-#include <asm/plat-s3c/regs-timer.h>
+#include <plat/regs-timer.h>
#include <mach/regs-irq.h>
#include <asm/mach/time.h>
#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/cpu.h>
static unsigned long timer_startval;
static unsigned long timer_usec_ticks;