lis3: solve dependency between core and ACPI
This solves the dependency between lis3lv02d.[ch] and ACPI specific
methods. It introduces a ->bus_priv pointer to the device struct which is
casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c
accordingly.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index eeae7c9..778eb77 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -36,7 +36,6 @@
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
-#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
@@ -53,18 +52,27 @@
* joystick.
*/
-struct acpi_lis3lv02d lis3_dev = {
+struct lis3lv02d lis3_dev = {
.misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
};
EXPORT_SYMBOL_GPL(lis3_dev);
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
+{
+ s8 lo;
+ if (lis3->read(lis3, reg, &lo) < 0)
+ return 0;
+
+ return lo;
+}
+
+static s16 lis3lv02d_read_16(struct lis3lv02d *lis3, int reg)
{
u8 lo, hi;
- lis3_dev.read(handle, reg, &lo);
- lis3_dev.read(handle, reg + 1, &hi);
+ lis3->read(lis3, reg - 1, &lo);
+ lis3->read(lis3, reg, &hi);
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
return (s16)((hi << 8) | lo);
}
@@ -86,36 +94,36 @@
/**
* lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
- * @handle: the handle to the device
- * @x: where to store the X axis value
- * @y: where to store the Y axis value
- * @z: where to store the Z axis value
+ * @lis3: pointer to the device struct
+ * @x: where to store the X axis value
+ * @y: where to store the Y axis value
+ * @z: where to store the Z axis value
*
* Note that 40Hz input device can eat up about 10% CPU at 800MHZ
*/
-static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
+static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
{
int position[3];
- position[0] = lis3_dev.read_data(handle, OUTX);
- position[1] = lis3_dev.read_data(handle, OUTY);
- position[2] = lis3_dev.read_data(handle, OUTZ);
+ position[0] = lis3_dev.read_data(lis3, OUTX);
+ position[1] = lis3_dev.read_data(lis3, OUTY);
+ position[2] = lis3_dev.read_data(lis3, OUTZ);
*x = lis3lv02d_get_axis(lis3_dev.ac.x, position);
*y = lis3lv02d_get_axis(lis3_dev.ac.y, position);
*z = lis3lv02d_get_axis(lis3_dev.ac.z, position);
}
-void lis3lv02d_poweroff(acpi_handle handle)
+void lis3lv02d_poweroff(struct lis3lv02d *lis3)
{
lis3_dev.is_on = 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
-void lis3lv02d_poweron(acpi_handle handle)
+void lis3lv02d_poweron(struct lis3lv02d *lis3)
{
lis3_dev.is_on = 1;
- lis3_dev.init(handle);
+ lis3_dev.init(lis3);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -124,13 +132,13 @@
* device will always be on until a call to lis3lv02d_decrease_use(). Not to be
* used from interrupt context.
*/
-static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev)
+static void lis3lv02d_increase_use(struct lis3lv02d *dev)
{
mutex_lock(&dev->lock);
dev->usage++;
if (dev->usage == 1) {
if (!dev->is_on)
- lis3lv02d_poweron(dev->device->handle);
+ lis3lv02d_poweron(dev);
}
mutex_unlock(&dev->lock);
}
@@ -139,12 +147,12 @@
* To be called whenever a usage of the device is stopped.
* It will make sure to turn off the device when there is not usage.
*/
-static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
+static void lis3lv02d_decrease_use(struct lis3lv02d *dev)
{
mutex_lock(&dev->lock);
dev->usage--;
if (dev->usage == 0)
- lis3lv02d_poweroff(dev->device->handle);
+ lis3lv02d_poweroff(dev);
mutex_unlock(&dev->lock);
}
@@ -291,7 +299,7 @@
int x, y, z;
while (!kthread_should_stop()) {
- lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib);
input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib);
input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib);
@@ -325,7 +333,8 @@
static inline void lis3lv02d_calibrate_joystick(void)
{
- lis3lv02d_get_xyz(lis3_dev.device->handle, &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
+ lis3lv02d_get_xyz(&lis3_dev,
+ &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
}
int lis3lv02d_joystick_enable(void)
@@ -382,7 +391,7 @@
int x, y, z;
lis3lv02d_increase_use(&lis3_dev);
- lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
lis3lv02d_decrease_use(&lis3_dev);
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
@@ -412,7 +421,7 @@
int val;
lis3lv02d_increase_use(&lis3_dev);
- lis3_dev.read(lis3_dev.device->handle, CTRL_REG1, &ctrl);
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
lis3lv02d_decrease_use(&lis3_dev);
val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
@@ -435,7 +444,7 @@
};
-static int lis3lv02d_add_fs(struct acpi_device *device)
+static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
{
lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
if (IS_ERR(lis3_dev.pdev))
@@ -456,10 +465,29 @@
* Initialise the accelerometer and the various subsystems.
* Should be rather independant of the bus system.
*/
-int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
+int lis3lv02d_init_device(struct lis3lv02d *dev)
{
+ dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
+
+ switch (dev->whoami) {
+ case LIS_DOUBLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+ dev->read_data = lis3lv02d_read_16;
+ dev->mdps_max_val = 2048;
+ break;
+ case LIS_SINGLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ break;
+ default:
+ printk(KERN_ERR DRIVER_NAME
+ ": unknown sensor type 0x%X\n", lis3_dev.whoami);
+ return -EINVAL;
+ }
+
mutex_init(&dev->lock);
- lis3lv02d_add_fs(dev->device);
+ lis3lv02d_add_fs(dev);
lis3lv02d_increase_use(dev);
if (lis3lv02d_joystick_enable())
@@ -467,10 +495,10 @@
printk("lis3_init_device: irq %d\n", dev->irq);
- /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ /* bail if we did not get an IRQ from the bus layer */
if (!dev->irq) {
printk(KERN_ERR DRIVER_NAME
- ": No IRQ in ACPI. Disabling /dev/freefall\n");
+ ": No IRQ. Disabling /dev/freefall\n");
goto out;
}