diff --git a/Documentation/trace/power.txt b/Documentation/trace/power.txt
deleted file mode 100644
index cd805e1..0000000
--- a/Documentation/trace/power.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-The power tracer collects detailed information about C-state and P-state
-transitions, instead of just looking at the high-level "average"
-information.
-
-There is a helper script found in scrips/tracing/power.pl in the kernel
-sources which can be used to parse this information and create a
-Scalable Vector Graphics (SVG) picture from the trace data.
-
-To use this tracer:
-
-	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
-	echo power > /sys/kernel/debug/tracing/current_tracer
-	echo 1 > /sys/kernel/debug/tracing/tracing_enabled
-	sleep 1
-	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
-	cat /sys/kernel/debug/tracing/trace | \
-		perl scripts/tracing/power.pl > out.sv
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 2646fcb..82b4007 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -95,7 +95,7 @@
 	OFFSET(__iobase,		mn10300_serial_port, _iobase);
 
 	DEFINE(__UART_XMIT_SIZE,	UART_XMIT_SIZE);
-	OFFSET(__xmit_buffer,		uart_info, xmit.buf);
-	OFFSET(__xmit_head,		uart_info, xmit.head);
-	OFFSET(__xmit_tail,		uart_info, xmit.tail);
+	OFFSET(__xmit_buffer,		uart_state, xmit.buf);
+	OFFSET(__xmit_head,		uart_state, xmit.head);
+	OFFSET(__xmit_tail,		uart_state, xmit.tail);
 }
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 7bb676c..7d5c3b0 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -33,7 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/compiler.h>
 #include <linux/dmi.h>
-#include <trace/power.h>
+#include <trace/events/power.h>
 
 #include <linux/acpi.h>
 #include <linux/io.h>
@@ -72,8 +72,6 @@
 
 static DEFINE_PER_CPU(struct aperfmperf, old_perf);
 
-DEFINE_TRACE(power_mark);
-
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance *acpi_perf_data;
 
@@ -332,7 +330,6 @@
 	unsigned int next_perf_state = 0; /* Index into perf table */
 	unsigned int i;
 	int result = 0;
-	struct power_trace it;
 
 	dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
 
@@ -364,7 +361,7 @@
 		}
 	}
 
-	trace_power_mark(&it, POWER_PSTATE, next_perf_state);
+	trace_power_frequency(POWER_PSTATE, data->freq_table[next_state].frequency);
 
 	switch (data->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 2732e2c..dbdf712 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -36,10 +36,10 @@
 #define BTS_RECORD_SIZE		24
 
 /* The size of a per-cpu BTS buffer in bytes: */
-#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 1024)
+#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 2048)
 
 /* The BTS overflow threshold in bytes from the end of the buffer: */
-#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 64)
+#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 128)
 
 
 /*
@@ -1488,8 +1488,7 @@
 	local_irq_restore(flags);
 }
 
-static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
-				       struct perf_sample_data *data)
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc)
 {
 	struct debug_store *ds = cpuc->ds;
 	struct bts_record {
@@ -1498,8 +1497,11 @@
 		u64	flags;
 	};
 	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
-	unsigned long orig_ip = data->regs->ip;
 	struct bts_record *at, *top;
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+	struct perf_sample_data data;
+	struct pt_regs regs;
 
 	if (!counter)
 		return;
@@ -1510,19 +1512,38 @@
 	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
 	top = (struct bts_record *)(unsigned long)ds->bts_index;
 
+	if (top <= at)
+		return;
+
 	ds->bts_index = ds->bts_buffer_base;
 
-	for (; at < top; at++) {
-		data->regs->ip	= at->from;
-		data->addr	= at->to;
 
-		perf_counter_output(counter, 1, data);
+	data.period	= counter->hw.last_period;
+	data.addr	= 0;
+	regs.ip		= 0;
+
+	/*
+	 * Prepare a generic sample, i.e. fill in the invariant fields.
+	 * We will overwrite the from and to address before we output
+	 * the sample.
+	 */
+	perf_prepare_sample(&header, &data, counter, &regs);
+
+	if (perf_output_begin(&handle, counter,
+			      header.size * (top - at), 1, 1))
+		return;
+
+	for (; at < top; at++) {
+		data.ip		= at->from;
+		data.addr	= at->to;
+
+		perf_output_sample(&handle, &header, &data, counter);
 	}
 
-	data->regs->ip	= orig_ip;
-	data->addr	= 0;
+	perf_output_end(&handle);
 
 	/* There's new data available. */
+	counter->hw.interrupts++;
 	counter->pending_kill = POLL_IN;
 }
 
@@ -1552,13 +1573,9 @@
 	x86_perf_counter_update(counter, hwc, idx);
 
 	/* Drain the remaining BTS records. */
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		struct perf_sample_data data;
-		struct pt_regs regs;
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS))
+		intel_pmu_drain_bts_buffer(cpuc);
 
-		data.regs = &regs;
-		intel_pmu_drain_bts_buffer(cpuc, &data);
-	}
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
 
@@ -1619,7 +1636,6 @@
 	int idx, handled = 0;
 	u64 val;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1644,7 +1660,7 @@
 		if (!x86_perf_counter_set_period(counter, hwc, idx))
 			continue;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			p6_pmu_disable_counter(hwc, idx);
 	}
 
@@ -1665,13 +1681,12 @@
 	int bit, loops;
 	u64 ack, status;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
-	intel_pmu_drain_bts_buffer(cpuc, &data);
+	intel_pmu_drain_bts_buffer(cpuc);
 	status = intel_pmu_get_status();
 	if (!status) {
 		perf_enable();
@@ -1702,7 +1717,7 @@
 
 		data.period = counter->hw.last_period;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			intel_pmu_disable_counter(&counter->hw, bit);
 	}
 
@@ -1729,7 +1744,6 @@
 	int idx, handled = 0;
 	u64 val;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1754,7 +1768,7 @@
 		if (!x86_perf_counter_set_period(counter, hwc, idx))
 			continue;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			amd_pmu_disable_counter(hwc, idx);
 	}
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 071166a..847ab41 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -9,7 +9,7 @@
 #include <linux/pm.h>
 #include <linux/clockchips.h>
 #include <linux/random.h>
-#include <trace/power.h>
+#include <trace/events/power.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -25,9 +25,6 @@
 
 struct kmem_cache *task_xstate_cachep;
 
-DEFINE_TRACE(power_start);
-DEFINE_TRACE(power_end);
-
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	*dst = *src;
@@ -299,9 +296,7 @@
 void default_idle(void)
 {
 	if (hlt_use_halt()) {
-		struct power_trace it;
-
-		trace_power_start(&it, POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1);
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
 		 * TS_POLLING-cleared state must be visible before we
@@ -314,7 +309,6 @@
 		else
 			local_irq_enable();
 		current_thread_info()->status |= TS_POLLING;
-		trace_power_end(&it);
 	} else {
 		local_irq_enable();
 		/* loop is done by the caller */
@@ -372,9 +366,7 @@
  */
 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 {
-	struct power_trace it;
-
-	trace_power_start(&it, POWER_CSTATE, (ax>>4)+1);
+	trace_power_start(POWER_CSTATE, (ax>>4)+1);
 	if (!need_resched()) {
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
@@ -384,15 +376,13 @@
 		if (!need_resched())
 			__mwait(ax, cx);
 	}
-	trace_power_end(&it);
 }
 
 /* Default MONITOR/MWAIT with no hints, used for default C1 state */
 static void mwait_idle(void)
 {
-	struct power_trace it;
 	if (!need_resched()) {
-		trace_power_start(&it, POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1);
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
@@ -402,7 +392,6 @@
 			__sti_mwait(0, 0);
 		else
 			local_irq_enable();
-		trace_power_end(&it);
 	} else
 		local_irq_enable();
 }
@@ -414,13 +403,11 @@
  */
 static void poll_idle(void)
 {
-	struct power_trace it;
-
-	trace_power_start(&it, POWER_CSTATE, 0);
+	trace_power_start(POWER_CSTATE, 0);
 	local_irq_enable();
 	while (!need_resched())
 		cpu_relax();
-	trace_power_end(&it);
+	trace_power_end(0);
 }
 
 /*
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 2dafc2d..df5038b 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -11,7 +11,7 @@
  * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
  * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
  *
- * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
  *
  * Much of the design and some of the code came from serial.c
  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
@@ -19,577 +19,9 @@
  * and then fixed as suggested by Michael K. Johnson 12/12/92.
  * Converted to pci probing and cleaned up by Jiri Slaby.
  *
- * This version supports shared IRQ's (only for PCI boards).
- *
- * Prevent users from opening non-existing Z ports.
- *
- * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
- * Fixed the PCI detection function to work properly on Alpha systems.
- * Implemented support for TIOCSERGETLSR ioctl.
- * Implemented full support for non-standard baud rates.
- *
- * Revision 2.3.2.7   2000/06/01 18:26:34 ivan
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- * Removed count for on-board buffer characters in cy_chars_in_buffer
- * (Cyclades-Z only).
- *
- * Revision 2.3.2.6   2000/05/05 13:56:05 ivan
- * Driver now reports physical instead of virtual memory addresses.
- * Masks were added to some Cyclades-Z read accesses.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Changed the Tx interrupt programming in the CD1400 chips to boost up
- * performance (Cyclom-Y only).
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- * Did some code "housekeeping".
- *
- * Revision 2.3.2.5   2000/01/19 14:35:33 ivan
- * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
- *
- * Revision 2.3.2.4   2000/01/17 09:19:40 ivan
- * Fixed SMP locking in Cyclom-Y interrupt handler.
- *
- * Revision 2.3.2.3   1999/12/28 12:11:39 ivan
- * Added a new cyclades_card field called nports to allow the driver to
- * know the exact number of ports found by the Z firmware after its load;
- * RX buffer contention prevention logic on interrupt op mode revisited
- * (Cyclades-Z only);
- * Revisited printk's for Z debug;
- * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
- *
- * Revision 2.3.2.2   1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
- * unable to transmit/receive data (Cyclades-Z only);
- * Implemented logic to prevent the RX buffer from being stuck with data
- * due to a driver / firmware race condition in interrupt op mode
- * (Cyclades-Z only);
- * Fixed bug in block_til_ready logic that would lead to a system crash;
- * Revisited cy_close spinlock usage;
- *
- * Revision 2.3.2.1   1999/09/28 11:01:22 ivan
- * Revisited CONFIG_PCI conditional compilation for PCI board support;
- * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
- * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
- * Removed CTS handling from the driver -- this is now completely handled
- * by the firmware (Cyclades-Z only);
- * Flush RX on-board buffers on a port open (Cyclades-Z only);
- * Fixed handling of ASYNC_SPD_* TTY flags;
- * Module unload now unmaps all memory area allocated by ioremap;
- *
- * Revision 2.3.1.1   1999/07/15 16:45:53 ivan
- * Removed CY_PROC conditional compilation;
- * Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
- * functions;
- * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
- * (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
- * ports from being configured at speeds above 115.2Kbps;
- * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
- * switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
- * configured to work in interrupt mode;
- *
- * Revision 2.2.2.3   1999/06/28 11:13:29 ivan
- * Added support for interrupt mode operation for the Z cards;
- * Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
- * the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
- * same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
- * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
- *
- * Revision 2.2.2.2  1999/05/14 17:18:15 ivan
- * /proc entry location changed to /proc/tty/driver/cyclades;
- * Added support to shared IRQ's (only for PCI boards);
- * Added support for Cobalt Qube2 systems;
- * IRQ [de]allocation scheme revisited;
- * BREAK implementation changed in order to make use of the 'break_ctl'
- * TTY facility;
- * Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
- * initialization code (for both Y and Z series).
- *
- * Revision 2.2.2.1  1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
- * closed properly after a SIGINT;
- * Module usage counter scheme revisited;
- * Added support to the upcoming Y PCI boards (i.e., support to additional
- * PCI Device ID's).
- *
- * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
- * Removed all unnecessary page-alignement operations in ioremap calls
- * (ioremap is currently safe for these operations).
- *
- * Revision 2.2.1.9  1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
- * order to make PLX9050-based boards work with certain motherboards.
- *
- * Revision 2.2.1.8  1998/11/13 12:46:20 ivan
- * cy_close function now resets (correctly) the tty->closing flag;
- * JIFFIES_DIFF macro fixed.
- *
- * Revision 2.2.1.7  1998/09/03 12:07:28 ivan
- * Fixed bug in cy_close function, which was not informing HW of
- * which port should have the reception disabled before doing so;
- * fixed Cyclom-8YoP hardware detection bug.
- *
- * Revision 2.2.1.6  1998/08/20 17:15:39 ivan
- * Fixed bug in cy_close function, which causes malfunction
- * of one of the first 4 ports when a higher port is closed
- * (Cyclom-Y only).
- *
- * Revision 2.2.1.5  1998/08/10 18:10:28 ivan
- * Fixed Cyclom-4Yo hardware detection bug.
- *
- * Revision 2.2.1.4  1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
- * Marc Lewis <marc@blarg.net>;
- * cyy_interrupt was changed to avoid occurrence of kernel oopses
- * during PPP operation.
- *
- * Revision 2.2.1.3  1998/06/01 12:09:10 ivan
- * General code review in order to comply with 2.1 kernel standards;
- * data loss prevention for slow devices revisited (cy_wait_until_sent
- * was created);
- * removed conditional compilation for new/old PCI structure support
- * (now the driver only supports the new PCI structure).
- *
- * Revision 2.2.1.1  1998/03/19 16:43:12 ivan
- * added conditional compilation for new/old PCI structure support;
- * removed kernel series (2.0.x / 2.1.x) conditional compilation.
- *
- * Revision 2.1.1.3  1998/03/16 18:01:12 ivan
- * cleaned up the data loss fix;
- * fixed XON/XOFF handling once more (Cyclades-Z);
- * general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
- * printers, by forcing a delay before closing the port.
- *
- * Revision 2.1.1.2  1998/02/17 16:50:00 ivan
- * fixed detection/handling of new CD1400 in Ye boards;
- * fixed XON/XOFF handling (Cyclades-Z);
- * fixed data loss caused by a premature port close;
- * introduction of a flag that holds the CD1400 version ID per port
- * (used by the CYGETCD1400VER new ioctl).
- *
- * Revision 2.1.1.1  1997/12/03 17:31:19 ivan
- * Code review for the module cleanup routine;
- * fixed RTS and DTR status report for new CD1400's in get_modem_info;
- * includes anonymous changes regarding signal_pending.
- *
- * Revision 2.1  1997/11/01 17:42:41 ivan
- * Changes in the driver to support Alpha systems (except 8Zo V_1);
- * BREAK fix for the Cyclades-Z boards;
- * driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
- * a special CD1400 feature related to HW flow control;
- * added support for the CD1400  rev. J (Cyclom-Y boards);
- * introduction of ioctls to:
- *  - control the rtsdtr_inv flag (Cyclom-Y);
- *  - control the rflow flag (Cyclom-Y);
- *  - adjust the polling interval (Cyclades-Z);
- *
- * Revision 1.36.4.33  1997/06/27 19:00:00  ivan
- * Fixes related to kernel version conditional
- * compilation.
- *
- * Revision 1.36.4.32  1997/06/14 19:30:00  ivan
- * Compatibility issues between kernels 2.0.x and
- * 2.1.x (mainly related to clear_bit function).
- *
- * Revision 1.36.4.31  1997/06/03 15:30:00  ivan
- * Changes to define the memory window according to the
- * board type.
- *
- * Revision 1.36.4.30  1997/05/16 15:30:00  daniel
- * Changes to support new cycladesZ boards.
- *
- * Revision 1.36.4.29  1997/05/12 11:30:00  daniel
- * Merge of Bentson's and Daniel's version 1.36.4.28.
- * Corrects bug in cy_detect_pci: check if there are more
- * ports than the number of static structs allocated.
- * Warning message during initialization if this driver is
- * used with the new generation of cycladesZ boards.  Those
- * will be supported only in next release of the driver.
- * Corrects bug in cy_detect_pci and cy_detect_isa that
- * returned wrong number of VALID boards, when a cyclomY
- * was found with no serial modules connected.
- * Changes to use current (2.1.x) kernel subroutine names
- * and created macros for compilation with 2.0.x kernel,
- * instead of the other way around.
- *
- * Revision 1.36.4.28  1997/05/?? ??:00:00  bentson
- * Change queue_task_irq_off to queue_task_irq.
- * The inline function queue_task_irq_off (tqueue.h)
- * was removed from latest releases of 2.1.x kernel.
- * Use of macro __init to mark the initialization
- * routines, so memory can be reused.
- * Also incorporate implementation of critical region
- * in function cleanup_module() created by anonymous
- * linuxer.
- *
- * Revision 1.36.4.28  1997/04/25 16:00:00  daniel
- * Change to support new firmware that solves DCD problem:
- * application could fail to receive SIGHUP signal when DCD
- * varying too fast.
- *
- * Revision 1.36.4.27  1997/03/26 10:30:00  daniel
- * Changed for support linux versions 2.1.X.
- * Backward compatible with linux versions 2.0.X.
- * Corrected illegal use of filler field in
- * CH_CTRL struct.
- * Deleted some debug messages.
- *
- * Revision 1.36.4.26  1997/02/27 12:00:00  daniel
- * Included check for NULL tty pointer in cyz_poll.
- *
- * Revision 1.36.4.25  1997/02/26 16:28:30  bentson
- * Bill Foster at Blarg! Online services noticed that
- * some of the switch elements of -Z modem control
- * lacked a closing "break;"
- *
- * Revision 1.36.4.24  1997/02/24 11:00:00  daniel
- * Changed low water threshold for buffer xmit_buf
- *
- * Revision 1.36.4.23  1996/12/02 21:50:16  bentson
- * Marcio provided fix to modem status fetch for -Z
- *
- * Revision 1.36.4.22  1996/10/28 22:41:17  bentson
- * improve mapping of -Z control page (thanks to Steve
- * Price <stevep@fa.tdktca.com> for help on this)
- *
- * Revision 1.36.4.21  1996/09/10 17:00:10  bentson
- * shift from CPU-bound to memcopy in cyz_polling operation
- *
- * Revision 1.36.4.20  1996/09/09 18:30:32  Bentson
- * Added support to set and report higher speeds.
- *
- * Revision 1.36.4.19c  1996/08/09 10:00:00  Marcio Saito
- * Some fixes in the HW flow control for the BETA release.
- * Don't try to register the IRQ.
- *
- * Revision 1.36.4.19  1996/08/08 16:23:18  Bentson
- * make sure "cyc" appears in all kernel messages; all soft interrupts
- * handled by same routine; recognize out-of-band reception; comment
- * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explicitly
- * flush chars; tidy up some startup messages;
- *
- * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
- * shift MOD_INC_USE_COUNT location to match
- * serial.c; purge some diagnostic messages;
- *
- * Revision 1.36.4.17  1996/07/25 18:01:08  bentson
- * enable modem status messages and fetch & process them; note
- * time of last activity type for each port; set_line_char now
- * supports more than line 0 and treats 0 baud correctly;
- * get_modem_info senses rs_status;
- *
- * Revision 1.36.4.16  1996/07/20 08:43:15  bentson
- * barely works--now's time to turn on
- * more features 'til it breaks
- *
- * Revision 1.36.4.15  1996/07/19 22:30:06  bentson
- * check more -Z board status; shorten boot message
- *
- * Revision 1.36.4.14  1996/07/19 22:20:37  bentson
- * fix reference to ch_ctrl in startup; verify return
- * values from cyz_issue_cmd and cyz_update_channel;
- * more stuff to get modem control correct;
- *
- * Revision 1.36.4.13  1996/07/11 19:53:33  bentson
- * more -Z stuff folded in; re-order changes to put -Z stuff
- * after -Y stuff (to make changes clearer)
- *
- * Revision 1.36.4.12  1996/07/11 15:40:55  bentson
- * Add code to poll Cyclades-Z.  Add code to get & set RS-232 control.
- * Add code to send break.  Clear firmware ID word at startup (so
- * that other code won't talk to inactive board).
- *
- * Revision 1.36.4.11  1996/07/09 05:28:29  bentson
- * add code for -Z in set_line_char
- *
- * Revision 1.36.4.10  1996/07/08 19:28:37  bentson
- * fold more -Z stuff (or in some cases, error messages)
- * into driver; add text to "don't know what to do" messages.
- *
- * Revision 1.36.4.9  1996/07/08 18:38:38  bentson
- * moved compile-time flags near top of file; cosmetic changes
- * to narrow text (to allow 2-up printing); changed many declarations
- * to "static" to limit external symbols; shuffled code order to
- * coalesce -Y and -Z specific code, also to put internal functions
- * in order of tty_driver structure; added code to recognize -Z
- * ports (and for moment, do nothing or report error); add cy_startup
- * to parse boot command line for extra base addresses for ISA probes;
- *
- * Revision 1.36.4.8  1996/06/25 17:40:19  bentson
- * reorder some code, fix types of some vars (int vs. long),
- * add cy_setup to support user declared ISA addresses
- *
- * Revision 1.36.4.7  1996/06/21 23:06:18  bentson
- * dump ioctl based firmware load (it's now a user level
- * program); ensure uninitialzed ports cannot be used
- *
- * Revision 1.36.4.6  1996/06/20 23:17:19  bentson
- * rename vars and restructure some code
- *
- * Revision 1.36.4.5  1996/06/14 15:09:44  bentson
- * get right status back after boot load
- *
- * Revision 1.36.4.4  1996/06/13 19:51:44  bentson
- * successfully loads firmware
- *
- * Revision 1.36.4.3  1996/06/13 06:08:33  bentson
- * add more of the code for the boot/load ioctls
- *
- * Revision 1.36.4.2  1996/06/11 21:00:51  bentson
- * start to add Z functionality--starting with ioctl
- * for loading firmware
- *
- * Revision 1.36.4.1  1996/06/10 18:03:02  bentson
- * added code to recognize Z/PCI card at initialization; report
- * presence, but card is not initialized (because firmware needs
- * to be loaded)
- *
- * Revision 1.36.3.8  1996/06/07 16:29:00  bentson
- * starting minor number at zero; added missing verify_area
- * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
- *
- * Revision 1.36.3.7  1996/04/19 21:06:18  bentson
- * remove unneeded boot message & fix CLOCAL hardware flow
- * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>);
- * remove unused diagnostic statements; minor 0 is first;
- *
- * Revision 1.36.3.6  1996/03/13 13:21:17  marcio
- * The kernel function vremap (available only in later 1.3.xx kernels)
- * allows the access to memory addresses above the RAM. This revision
- * of the driver supports PCI boards below 1Mb (device id 0x100) and
- * above 1Mb (device id 0x101).
- *
- * Revision 1.36.3.5  1996/03/07 15:20:17  bentson
- * Some global changes to interrupt handling spilled into
- * this driver--mostly unused arguments in system function
- * calls.  Also added change by Marcio Saito which should
- * reduce lost interrupts at startup by fast processors.
- *
- * Revision 1.36.3.4  1995/11/13  20:45:10  bentson
- * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed
- * in 1.3.41 kernel to remove a possible race condition, extend
- * some error messages, and let the driver run as a loadable module
- * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a
- * possible race condition.
- * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing.
- *
- * Revision 1.36.3.3  1995/11/13  19:44:48  bentson
- * Changes by Linus Torvalds in 1.3.33 kernel distribution
- * required due to reordering of driver initialization.
- * Drivers are now initialized *after* memory management.
- *
- * Revision 1.36.3.2  1995/09/08  22:07:14  bentson
- * remove printk from ISR; fix typo
- *
- * Revision 1.36.3.1  1995/09/01  12:00:42  marcio
- * Minor fixes in the PCI board support. PCI function calls in
- * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
- * <duncan@okay.com>. "bad serial count" message removed.
- *
- * Revision 1.36.3  1995/08/22  09:19:42  marcio
- * Cyclom-Y/PCI support added. Changes in the cy_init routine and
- * board initialization. Changes in the boot messages. The driver
- * supports up to 4 boards and 64 ports by default.
- *
- * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Revision 1.36.1.3  1995/03/23  22:15:35  bentson
- * add missing break in modem control block in ioctl switch statement
- * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>);
- *
- * Revision 1.36.1.2  1995/03/22  19:16:22  bentson
- * make sure CTS flow control is set as soon as possible (thanks
- * to note from David Lambert <lambert@chesapeake.rps.slb.com>);
- *
- * Revision 1.36.1.1  1995/03/13  15:44:43  bentson
- * initialize defaults for receive threshold and stale data timeout;
- * cosmetic changes;
- *
- * Revision 1.36  1995/03/10  23:33:53  bentson
- * added support of chips 4-7 in 32 port Cyclom-Ye;
- * fix cy_interrupt pointer dereference problem
- * (Joe Portman <baron@aa.net>);
- * give better error response if open is attempted on non-existent port
- * (Zachariah Vaum <jchryslr@netcom.com>);
- * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
- * conditional compilation for -16Y on systems with fast, noisy bus;
- * comment out diagnostic print function;
- * cleaned up table of base addresses;
- * set receiver time-out period register to correct value,
- * set receive threshold to better default values,
- * set chip timer to more accurate 200 Hz ticking,
- * add code to monitor and modify receive parameters
- * (Rik Faith <faith@cs.unc.edu> Nick Simicich
- * <njs@scifi.emi.net>);
- *
- * Revision 1.35  1994/12/16  13:54:18  steffen
- * additional patch by Marcio Saito for board detection
- * Accidently left out in 1.34
- *
- * Revision 1.34  1994/12/10  12:37:12  steffen
- * This is the corrected version as suggested by Marcio Saito
- *
- * Revision 1.33  1994/12/01  22:41:18  bentson
- * add hooks to support more high speeds directly; add tytso
- * patch regarding CLOCAL wakeups
- *
- * Revision 1.32  1994/11/23  19:50:04  bentson
- * allow direct kernel control of higher signalling rates;
- * look for cards at additional locations
- *
- * Revision 1.31  1994/11/16  04:33:28  bentson
- * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com--
- * a problem in chars_in_buffer has been resolved by some
- * small changes;  this should yield smoother output
- *
- * Revision 1.30  1994/11/16  04:28:05  bentson
- * Fix from Corey Minyard, Internet: minyard@metronet.com,
- * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to
- * cy_hangup that appears to clear up much (all?) of the
- * DTR glitches; also he's added/cleaned-up diagnostic messages
- *
- * Revision 1.29  1994/11/16  04:16:07  bentson
- * add change proposed by Ralph Sims, ralphs@halcyon.com, to
- * operate higher speeds in same way as other serial ports;
- * add more serial ports (for up to two 16-port muxes).
- *
- * Revision 1.28  1994/11/04  00:13:16  root
- * turn off diagnostic messages
- *
- * Revision 1.27  1994/11/03  23:46:37  root
- * bunch of changes to bring driver into greater conformance
- * with the serial.c driver (looking for missed fixes)
- *
- * Revision 1.26  1994/11/03  22:40:36  root
- * automatic interrupt probing fixed.
- *
- * Revision 1.25  1994/11/03  20:17:02  root
- * start to implement auto-irq
- *
- * Revision 1.24  1994/11/03  18:01:55  root
- * still working on modem signals--trying not to drop DTR
- * during the getty/login processes
- *
- * Revision 1.23  1994/11/03  17:51:36  root
- * extend baud rate support; set receive threshold as function
- * of baud rate; fix some problems with RTS/CTS;
- *
- * Revision 1.22  1994/11/02  18:05:35  root
- * changed arguments to udelay to type long to get
- * delays to be of correct duration
- *
- * Revision 1.21  1994/11/02  17:37:30  root
- * employ udelay (after calibrating loops_per_second earlier
- * in init/main.c) instead of using home-grown delay routines
- *
- * Revision 1.20  1994/11/02  03:11:38  root
- * cy_chars_in_buffer forces a return value of 0 to let
- * login work (don't know why it does); some functions
- * that were returning EFAULT, now executes the code;
- * more work on deciding when to disable xmit interrupts;
- *
- * Revision 1.19  1994/11/01  20:10:14  root
- * define routine to start transmission interrupts (by enabling
- * transmit interrupts); directly enable/disable modem interrupts;
- *
- * Revision 1.18  1994/11/01  18:40:45  bentson
- * Don't always enable transmit interrupts in startup; interrupt on
- * TxMpty instead of TxRdy to help characters get out before shutdown;
- * restructure xmit interrupt to check for chars first and quit if
- * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
- * (to my view);
- *
- * Revision 1.17  1994/10/30  04:39:45  bentson
- * rename serial_driver and callout_driver to cy_serial_driver and
- * cy_callout_driver to avoid linkage interference; initialize
- * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
- * from cyclades_port structure; add paranoia check to cy_close;
- *
- * Revision 1.16  1994/10/30  01:14:33  bentson
- * change major numbers; add some _early_ return statements;
- *
- * Revision 1.15  1994/10/29  06:43:15  bentson
- * final tidying up for clean compile;  enable some error reporting
- *
- * Revision 1.14  1994/10/28  20:30:22  Bentson
- * lots of changes to drag the driver towards the new tty_io
- * structures and operation.  not expected to work, but may
- * compile cleanly.
- *
- * Revision 1.13  1994/07/21  23:08:57  Bentson
- * add some diagnostic cruft; support 24 lines (for testing
- * both -8Y and -16Y cards; be more thorough in servicing all
- * chips during interrupt; add "volatile" a few places to
- * circumvent compiler optimizations; fix base & offset
- * computations in block_til_ready (was causing chip 0 to
- * stop operation)
- *
- * Revision 1.12  1994/07/19  16:42:11  Bentson
- * add some hackery for kernel version 1.1.8; expand
- * error messages; refine timing for delay loops and
- * declare loop params volatile
- *
- * Revision 1.11  1994/06/11  21:53:10  bentson
- * get use of save_car right in transmit interrupt service
- *
- * Revision 1.10.1.1  1994/06/11  21:31:18  bentson
- * add some diagnostic printing; try to fix save_car stuff
- *
- * Revision 1.10  1994/06/11  20:36:08  bentson
- * clean up compiler warnings
- *
- * Revision 1.9  1994/06/11  19:42:46  bentson
- * added a bunch of code to support modem signalling
- *
- * Revision 1.8  1994/06/11  17:57:07  bentson
- * recognize break & parity error
- *
- * Revision 1.7  1994/06/05  05:51:34  bentson
- * Reorder baud table to be monotonic; add cli to CP; discard
- * incoming characters and status if the line isn't open; start to
- * fold code into cy_throttle; start to port get_serial_info,
- * set_serial_info, get_modem_info, set_modem_info, and send_break
- * from serial.c; expand cy_ioctl; relocate and expand config_setup;
- * get flow control characters from tty struct; invalidate ports w/o
- * hardware;
- *
- * Revision 1.6  1994/05/31  18:42:21  bentson
- * add a loop-breaker in the interrupt service routine;
- * note when port is initialized so that it can be shut
- * down under the right conditions; receive works without
- * any obvious errors
- *
- * Revision 1.5  1994/05/30  00:55:02  bentson
- * transmit works without obvious errors
- *
- * Revision 1.4  1994/05/27  18:46:27  bentson
- * incorporated more code from lib_y.c; can now print short
- * strings under interrupt control to port zero; seems to
- * select ports/channels/lines correctly
- *
- * Revision 1.3  1994/05/25  22:12:44  bentson
- * shifting from multi-port on a card to proper multiplexor
- * data structures;  added skeletons of most routines
- *
- * Revision 1.2  1994/05/19  13:21:43  bentson
- * start to crib from other sources
- *
  */
 
-#define CY_VERSION	"2.5"
+#define CY_VERSION	"2.6"
 
 /* If you need to install more boards than NR_CARDS, change the constant
    in the definition below. No other change is necessary to support up to
@@ -648,9 +80,7 @@
 #include <linux/firmware.h>
 #include <linux/device.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
-#include <asm/irq.h>
 #include <linux/uaccess.h>
 
 #include <linux/kernel.h>
@@ -660,13 +90,11 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
-static void cy_throttle(struct tty_struct *tty);
 static void cy_send_xchar(struct tty_struct *tty, char ch);
 
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
-#define WAKEUP_CHARS		256
 
 #define STD_COM_FLAGS (0)
 
@@ -756,25 +184,25 @@
  *                                               HI            VHI
  *     20
  */
-static int baud_table[] = {
+static const int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
 	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
 	230400, 0
 };
 
-static char baud_co_25[] = {	/* 25 MHz clock option table */
+static const char baud_co_25[] = {	/* 25 MHz clock option table */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
 	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
+static const char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
 	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
 	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
 };
 
-static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
+static const char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
@@ -782,13 +210,13 @@
 	0x00
 };
 
-static char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
+static const char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
 	0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
 	0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
 	0x21
 };
 
-static char baud_cor3[] = {	/* receive threshold */
+static const char baud_cor3[] = {	/* receive threshold */
 	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
 	0x07
@@ -805,7 +233,7 @@
  * cables.
  */
 
-static char rflow_thr[] = {	/* rflow threshold */
+static const char rflow_thr[] = {	/* rflow threshold */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a
@@ -814,7 +242,7 @@
 /*  The Cyclom-Ye has placed the sequential chips in non-sequential
  *  address order.  This look-up table overcomes that problem.
  */
-static int cy_chip_offset[] = { 0x0000,
+static const unsigned int cy_chip_offset[] = { 0x0000,
 	0x0400,
 	0x0800,
 	0x0C00,
@@ -827,7 +255,7 @@
 /* PCI related definitions */
 
 #ifdef CONFIG_PCI
-static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
+static const struct pci_device_id cy_pci_dev_id[] = {
 	/* PCI < 1Mb */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
 	/* PCI > 1Mb */
@@ -850,7 +278,7 @@
 #endif
 
 static void cy_start(struct tty_struct *);
-static void set_line_char(struct cyclades_port *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
 #ifdef CONFIG_ISA
 static unsigned detect_isa_irq(void __iomem *);
@@ -869,6 +297,20 @@
 static struct timer_list cyz_rx_full_timer[NR_PORTS];
 #endif				/* CONFIG_CYZ_INTR */
 
+static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
+{
+	struct cyclades_card *card = port->card;
+
+	cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
+}
+
+static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
+{
+	struct cyclades_card *card = port->card;
+
+	return readb(port->u.cyy.base_addr + (reg << card->bus_index));
+}
+
 static inline bool cy_is_Z(struct cyclades_card *card)
 {
 	return card->num_chips == (unsigned int)-1;
@@ -893,7 +335,7 @@
 }
 
 static inline int serial_paranoia_check(struct cyclades_port *info,
-		char *name, const char *routine)
+		const char *name, const char *routine)
 {
 #ifdef SERIAL_PARANOIA_CHECK
 	if (!info) {
@@ -909,7 +351,7 @@
 	}
 #endif
 	return 0;
-}				/* serial_paranoia_check */
+}
 
 /***********************************************************/
 /********* Start of block of Cyclom-Y specific code ********/
@@ -921,13 +363,14 @@
 
    This function is only called from inside spinlock-protected code.
  */
-static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
+static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
 {
+	void __iomem *ccr = base_addr + (CyCCR << index);
 	unsigned int i;
 
 	/* Check to see that the previous command has completed */
 	for (i = 0; i < 100; i++) {
-		if (readb(base_addr + (CyCCR << index)) == 0)
+		if (readb(ccr) == 0)
 			break;
 		udelay(10L);
 	}
@@ -937,10 +380,16 @@
 		return -1;
 
 	/* Issue the new command */
-	cy_writeb(base_addr + (CyCCR << index), cmd);
+	cy_writeb(ccr, cmd);
 
 	return 0;
-}				/* cyy_issue_cmd */
+}
+
+static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
+{
+	return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
+			port->card->bus_index);
+}
 
 #ifdef CONFIG_ISA
 /* ISA interrupt detection code */
@@ -960,12 +409,12 @@
 
 	irqs = probe_irq_on();
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Enable the Tx interrupts on the CD1400 */
 	local_irq_save(flags);
 	cy_writeb(address + (CyCAR << index), 0);
-	cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+	__cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
 
 	cy_writeb(address + (CyCAR << index), 0);
 	cy_writeb(address + (CySRER << index),
@@ -973,7 +422,7 @@
 	local_irq_restore(flags);
 
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Check which interrupt is in use */
 	irq = probe_irq_off(irqs);
@@ -999,7 +448,7 @@
 	struct cyclades_port *info;
 	struct tty_struct *tty;
 	int len, index = cinfo->bus_index;
-	u8 save_xir, channel, save_car, data, char_count;
+	u8 ivr, save_xir, channel, save_car, data, char_count;
 
 #ifdef CY_DEBUG_INTERRUPTS
 	printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
@@ -1008,26 +457,25 @@
 	save_xir = readb(base_addr + (CyRIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
+	ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
 
+	tty = tty_port_tty_get(&info->port);
 	/* if there is nowhere to put the data, discard it */
-	if (info->port.tty == NULL) {
-		if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-				CyIVRRxEx) {	/* exception */
-			data = readb(base_addr + (CyRDSR << index));
+	if (tty == NULL) {
+		if (ivr == CyIVRRxEx) {	/* exception */
+			data = cyy_readb(info, CyRDSR);
 		} else {	/* normal character reception */
-			char_count = readb(base_addr + (CyRDCR << index));
+			char_count = cyy_readb(info, CyRDCR);
 			while (char_count--)
-				data = readb(base_addr + (CyRDSR << index));
+				data = cyy_readb(info, CyRDSR);
 		}
 		goto end;
 	}
 	/* there is an open port for this data */
-	tty = info->port.tty;
-	if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-			CyIVRRxEx) {	/* exception */
-		data = readb(base_addr + (CyRDSR << index));
+	if (ivr == CyIVRRxEx) {	/* exception */
+		data = cyy_readb(info, CyRDSR);
 
 		/* For statistics only */
 		if (data & CyBREAK)
@@ -1041,28 +489,29 @@
 
 		if (data & info->ignore_status_mask) {
 			info->icount.rx++;
+			tty_kref_put(tty);
 			return;
 		}
 		if (tty_buffer_request_room(tty, 1)) {
 			if (data & info->read_status_mask) {
 				if (data & CyBREAK) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_BREAK);
+						cyy_readb(info, CyRDSR),
+						TTY_BREAK);
 					info->icount.rx++;
 					if (info->port.flags & ASYNC_SAK)
 						do_SAK(tty);
 				} else if (data & CyFRAME) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.frame_errs++;
 				} else if (data & CyPARITY) {
 					/* Pieces of seven... */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_PARITY);
+						cyy_readb(info, CyRDSR),
+						TTY_PARITY);
 					info->icount.rx++;
 					info->idle_stats.parity_errs++;
 				} else if (data & CyOVERRUN) {
@@ -1074,8 +523,8 @@
 					   the next incoming character.
 					 */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.overruns++;
 				/* These two conditions may imply */
@@ -1099,7 +548,7 @@
 		}
 	} else {	/* normal character reception */
 		/* load # chars available from the chip */
-		char_count = readb(base_addr + (CyRDCR << index));
+		char_count = cyy_readb(info, CyRDCR);
 
 #ifdef CY_ENABLE_MONITORING
 		++info->mon.int_count;
@@ -1110,7 +559,7 @@
 #endif
 		len = tty_buffer_request_room(tty, char_count);
 		while (len--) {
-			data = readb(base_addr + (CyRDSR << index));
+			data = cyy_readb(info, CyRDSR);
 			tty_insert_flip_char(tty, data, TTY_NORMAL);
 			info->idle_stats.recv_bytes++;
 			info->icount.rx++;
@@ -1121,16 +570,18 @@
 		info->idle_stats.recv_idle = jiffies;
 	}
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyRIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int char_count, index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, outch;
 
@@ -1154,9 +605,9 @@
 		goto end;
 	}
 	info = &cinfo->ports[channel + chip * 4];
-	if (info->port.tty == NULL) {
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+	tty = tty_port_tty_get(&info->port);
+	if (tty == NULL) {
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		goto end;
 	}
 
@@ -1165,7 +616,7 @@
 
 	if (info->x_char) {	/* send special char */
 		outch = info->x_char;
-		cy_writeb(base_addr + (CyTDR << index), outch);
+		cyy_writeb(info, CyTDR, outch);
 		char_count--;
 		info->icount.tx++;
 		info->x_char = 0;
@@ -1173,14 +624,14 @@
 
 	if (info->breakon || info->breakoff) {
 		if (info->breakon) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x81);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x81);
 			info->breakon = 0;
 			char_count -= 2;
 		}
 		if (info->breakoff) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x83);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x83);
 			info->breakoff = 0;
 			char_count -= 2;
 		}
@@ -1188,27 +639,23 @@
 
 	while (char_count-- > 0) {
 		if (!info->xmit_cnt) {
-			if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxMpty);
+			if (cyy_readb(info, CySRER) & CyTxMpty) {
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxMpty);
 			} else {
-				cy_writeb(base_addr + (CySRER << index),
-					(readb(base_addr + (CySRER << index)) &
-						~CyTxRdy) | CyTxMpty);
+				cyy_writeb(info, CySRER, CyTxMpty |
+					(cyy_readb(info, CySRER) & ~CyTxRdy));
 			}
 			goto done;
 		}
 		if (info->port.xmit_buf == NULL) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
-		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+		if (tty->stopped || tty->hw_stopped) {
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
 		/* Because the Embedded Transmit Commands have been enabled,
@@ -1225,15 +672,15 @@
 			info->xmit_cnt--;
 			info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-			cy_writeb(base_addr + (CyTDR << index), outch);
+			cyy_writeb(info, CyTDR, outch);
 			info->icount.tx++;
 		} else {
 			if (char_count > 1) {
 				info->xmit_cnt--;
 				info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-				cy_writeb(base_addr + (CyTDR << index), outch);
-				cy_writeb(base_addr + (CyTDR << index), 0);
+				cyy_writeb(info, CyTDR, outch);
+				cyy_writeb(info, CyTDR, 0);
 				info->icount.tx++;
 				char_count--;
 			}
@@ -1241,17 +688,19 @@
 	}
 
 done:
-	tty_wakeup(info->port.tty);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyTIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, mdm_change, mdm_status;
 
@@ -1259,13 +708,14 @@
 	save_xir = readb(base_addr + (CyMIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
 
-	mdm_change = readb(base_addr + (CyMISR << index));
-	mdm_status = readb(base_addr + (CyMSVR1 << index));
+	mdm_change = cyy_readb(info, CyMISR);
+	mdm_status = cyy_readb(info, CyMSVR1);
 
-	if (!info->port.tty)
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
 		goto end;
 
 	if (mdm_change & CyANY_DELTA) {
@@ -1279,35 +729,32 @@
 		if (mdm_change & CyRI)
 			info->icount.rng++;
 
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 	}
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
-		if (!(mdm_status & CyDCD)) {
-			tty_hangup(info->port.tty);
-			info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-		}
-		wake_up_interruptible(&info->port.open_wait);
+		if (mdm_status & CyDCD)
+			wake_up_interruptible(&info->port.open_wait);
+		else
+			tty_hangup(tty);
 	}
 	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
-		if (info->port.tty->hw_stopped) {
+		if (tty->hw_stopped) {
 			if (mdm_status & CyCTS) {
 				/* cy_start isn't used
 				   because... !!! */
-				info->port.tty->hw_stopped = 0;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) |
-						CyTxRdy);
-				tty_wakeup(info->port.tty);
+				tty->hw_stopped = 0;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyTxRdy);
+				tty_wakeup(tty);
 			}
 		} else {
 			if (!(mdm_status & CyCTS)) {
 				/* cy_stop isn't used
 				   because ... !!! */
-				info->port.tty->hw_stopped = 1;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxRdy);
+				tty->hw_stopped = 1;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxRdy);
 			}
 		}
 	}
@@ -1315,10 +762,11 @@
 	}
 	if (mdm_change & CyRI) {
 	}*/
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyMIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 /* The real interrupt service routine is called
@@ -1389,6 +837,56 @@
 	return IRQ_HANDLED;
 }				/* cyy_interrupt */
 
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+		unsigned int clear)
+{
+	struct cyclades_card *card = info->card;
+	int channel = info->line - card->first_line;
+	u32 rts, dtr, msvrr, msvrd;
+
+	channel &= 0x03;
+
+	if (info->rtsdtr_inv) {
+		msvrr = CyMSVR2;
+		msvrd = CyMSVR1;
+		rts = CyDTR;
+		dtr = CyRTS;
+	} else {
+		msvrr = CyMSVR1;
+		msvrd = CyMSVR2;
+		rts = CyRTS;
+		dtr = CyDTR;
+	}
+	if (set & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, rts);
+	}
+	if (clear & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, ~rts);
+	}
+	if (set & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+	if (clear & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, ~dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+}
+
 /***********************************************************/
 /********* End of block of Cyclom-Y specific code **********/
 /******** Start of block of Cyclades-Z specific code *******/
@@ -1398,15 +896,9 @@
 cyz_fetch_msg(struct cyclades_card *cinfo,
 		__u32 *channel, __u8 *cmd, __u32 *param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	unsigned long loc_doorbell;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
 	if (loc_doorbell) {
 		*cmd = (char)(0xff & loc_doorbell);
@@ -1422,19 +914,13 @@
 cyz_issue_cmd(struct cyclades_card *cinfo,
 		__u32 channel, __u8 cmd, __u32 param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	__u32 __iomem *pci_doorbell;
 	unsigned int index;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
 	if (!cyz_is_loaded(cinfo))
 		return -1;
 
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	index = 0;
 	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
 	while ((readl(pci_doorbell) & 0xff) != 0) {
@@ -1449,11 +935,10 @@
 	return 0;
 }				/* cyz_issue_cmd */
 
-static void cyz_handle_rx(struct cyclades_port *info,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	unsigned int char_count;
 	int len;
 #ifdef BLOCKMOVE
@@ -1542,11 +1027,10 @@
 	}
 }
 
-static void cyz_handle_tx(struct cyclades_port *info,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	u8 data;
 	unsigned int char_count;
 #ifdef BLOCKMOVE
@@ -1621,34 +1105,24 @@
 
 static void cyz_handle_cmd(struct cyclades_card *cinfo)
 {
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	struct tty_struct *tty;
 	struct cyclades_port *info;
-	static struct FIRM_ID __iomem *firm_id;
-	static struct ZFW_CTRL __iomem *zfw_ctrl;
-	static struct BOARD_CTRL __iomem *board_ctrl;
-	static struct CH_CTRL __iomem *ch_ctrl;
-	static struct BUF_CTRL __iomem *buf_ctrl;
 	__u32 channel, param, fw_ver;
 	__u8 cmd;
 	int special_count;
 	int delta_count;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
 	fw_ver = readl(&board_ctrl->fw_version);
 
 	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
 		special_count = 0;
 		delta_count = 0;
 		info = &cinfo->ports[channel];
-		tty = info->port.tty;
+		tty = tty_port_tty_get(&info->port);
 		if (tty == NULL)
 			continue;
 
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		switch (cmd) {
 		case C_CM_PR_ERROR:
 			tty_insert_flip_char(tty, 0, TTY_PARITY);
@@ -1669,15 +1143,12 @@
 			info->icount.dcd++;
 			delta_count++;
 			if (info->port.flags & ASYNC_CHECK_CD) {
-				if ((fw_ver > 241 ? ((u_long) param) :
-						readl(&ch_ctrl->rs_status)) &
-						C_RS_DCD) {
+				u32 dcd = fw_ver > 241 ? param :
+					readl(&info->u.cyz.ch_ctrl->rs_status);
+				if (dcd & C_RS_DCD)
 					wake_up_interruptible(&info->port.open_wait);
-				} else {
-					tty_hangup(info->port.tty);
-					wake_up_interruptible(&info->port.open_wait);
-					info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-				}
+				else
+					tty_hangup(tty);
 			}
 			break;
 		case C_CM_MCTS:
@@ -1706,7 +1177,7 @@
 			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_rx(info, buf_ctrl);
+			cyz_handle_rx(info, tty);
 			break;
 		case C_CM_TXBEMPTY:
 		case C_CM_TXLOWWM:
@@ -1716,7 +1187,7 @@
 			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_tx(info, buf_ctrl);
+			cyz_handle_tx(info, tty);
 			break;
 #endif				/* CONFIG_CYZ_INTR */
 		case C_CM_FATAL:
@@ -1726,9 +1197,10 @@
 			break;
 		}
 		if (delta_count)
-			wake_up_interruptible(&info->delta_msr_wait);
+			wake_up_interruptible(&info->port.delta_msr_wait);
 		if (special_count)
 			tty_schedule_flip(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -1774,10 +1246,6 @@
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info;
-	struct tty_struct *tty;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BUF_CTRL __iomem *buf_ctrl;
 	unsigned long expires = jiffies + HZ;
 	unsigned int port, card;
 
@@ -1789,10 +1257,6 @@
 		if (!cyz_is_loaded(cinfo))
 			continue;
 
-		firm_id = cinfo->base_addr + ID_ADDRESS;
-		zfw_ctrl = cinfo->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-
 	/* Skip first polling cycle to avoid racing conditions with the FW */
 		if (!cinfo->intr_enabled) {
 			cinfo->intr_enabled = 1;
@@ -1802,13 +1266,17 @@
 		cyz_handle_cmd(cinfo);
 
 		for (port = 0; port < cinfo->nports; port++) {
+			struct tty_struct *tty;
+
 			info = &cinfo->ports[port];
-			tty = info->port.tty;
-			buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
+			tty = tty_port_tty_get(&info->port);
+			/* OK to pass NULL to the handle functions below.
+			   They need to drop the data in that case. */
 
 			if (!info->throttle)
-				cyz_handle_rx(info, buf_ctrl);
-			cyz_handle_tx(info, buf_ctrl);
+				cyz_handle_rx(info, tty);
+			cyz_handle_tx(info, tty);
+			tty_kref_put(tty);
 		}
 		/* poll every 'cyz_polling_cycle' period */
 		expires = jiffies + cyz_polling_cycle;
@@ -1824,13 +1292,12 @@
 /* This is called whenever a port becomes active;
    interrupts are enabled and DTR & RTS are turned on.
  */
-static int startup(struct cyclades_port *info)
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
 	int retval = 0;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long page;
 
 	card = info->card;
@@ -1842,15 +1309,11 @@
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
-	if (info->port.flags & ASYNC_INITIALIZED) {
-		free_page(page);
+	if (info->port.flags & ASYNC_INITIALIZED)
 		goto errout;
-	}
 
 	if (!info->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		free_page(page);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		goto errout;
 	}
 
@@ -1861,96 +1324,53 @@
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
 		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
-				"base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
-				index);
+		cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
 
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
-		cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
+		cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
 
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising DTR\n");
-		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base_addr + (CyMSVR1 << index)),
-			readb(base_addr + (CyMSVR2 << index)));
-#endif
-
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyRxData);
-		info->port.flags |= ASYNC_INITIALIZED;
-
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
-
-		spin_unlock_irqrestore(&card->card_lock, flags);
-
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
-		base_addr = card->base_addr;
-
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return -ENODEV;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+		cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
 #ifdef Z_WAKE
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_IOCTLW | C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #else
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
+		cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #endif				/* Z_WAKE */
 
@@ -1969,33 +1389,23 @@
 
 		/* set timeout !!! */
 		/* set RTS and DTR !!! */
-		cy_writel(&ch_ctrl[channel].rs_control,
-			readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
-			C_RS_DTR);
-		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
-		if (retval != 0) {
-			printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
-				"%x\n", info->line, retval);
-		}
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
-#endif
+		tty_port_raise_dtr_rts(&info->port);
 
 		/* enable send, recv, modem !!! */
-
-		info->port.flags |= ASYNC_INITIALIZED;
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
-
-		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 
+	info->port.flags |= ASYNC_INITIALIZED;
+
+	clear_bit(TTY_IO_ERROR, &tty->flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	info->breakon = info->breakoff = 0;
+	memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+	info->idle_stats.in_use =
+	info->idle_stats.recv_idle =
+	info->idle_stats.xmit_idle = jiffies;
+
+	spin_unlock_irqrestore(&card->card_lock, flags);
+
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc startup done\n");
 #endif
@@ -2003,28 +1413,20 @@
 
 errout:
 	spin_unlock_irqrestore(&card->card_lock, flags);
+	free_page(page);
 	return retval;
 }				/* startup */
 
 static void start_xmit(struct cyclades_port *info)
 {
-	struct cyclades_card *card;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel = info->line - card->first_line;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), channel);
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
 #ifdef CONFIG_CYZ_INTR
@@ -2047,12 +1449,11 @@
  * This routine shuts down a serial port; interrupts are disabled,
  * and DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct cyclades_port *info)
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 
 	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
@@ -2060,21 +1461,10 @@
 	card = info->card;
 	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
-				"channel %d, base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		/* Clear delta_msr_wait queue to avoid mem leaks. */
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 
 		if (info->port.xmit_buf) {
 			unsigned char *temp;
@@ -2082,47 +1472,25 @@
 			info->port.xmit_buf = NULL;
 			free_page((unsigned long)temp);
 		}
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
-			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
+		if (tty->termios->c_cflag & HUPCL)
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
+		cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-		int retval;
-
-		base_addr = card->base_addr;
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		if (info->port.xmit_buf) {
@@ -2132,23 +1500,10 @@
 			free_page((unsigned long)temp);
 		}
 
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-			cy_writel(&ch_ctrl[channel].rs_control,
-				(__u32)(readl(&ch_ctrl[channel].rs_control) &
-					~(C_RS_RTS | C_RS_DTR)));
-			retval = cyz_issue_cmd(info->card, channel,
-					C_CM_IOCTLM, 0L);
-			if (retval != 0) {
-				printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
-					"was %x\n", info->line, retval);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
-#endif
-		}
+		if (tty->termios->c_cflag & HUPCL)
+			tty_port_lower_dtr_rts(&info->port);
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2165,199 +1520,6 @@
  * ------------------------------------------------------------
  */
 
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
-		struct cyclades_port *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct cyclades_card *cinfo;
-	unsigned long flags;
-	int chip, channel, index;
-	int retval;
-	void __iomem *base_addr;
-
-	cinfo = info->card;
-	channel = info->line - cinfo->first_line;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->port.close_wait,
-				!(info->port.flags & ASYNC_CLOSING));
-		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
-	}
-
-	/*
-	 * If non-blocking mode is set, then make the check up front
-	 * and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-					(tty->flags & (1 << TTY_IO_ERROR))) {
-		info->port.flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->port.count is dropped by one, so that
-	 * cy_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->port.open_wait, &wait);
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	spin_lock_irqsave(&cinfo->card_lock, flags);
-	if (!tty_hung_up_p(filp))
-		info->port.count--;
-	spin_unlock_irqrestore(&cinfo->card_lock, flags);
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
-		"%d\n", current->pid, info->port.count);
-#endif
-	info->port.blocked_open++;
-
-	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = cinfo->bus_index;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
-		while (1) {
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writeb(base_addr + (CyCAR << index),
-					  (u_char) channel);
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"DTR\n");
-				printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-					readb(base_addr + (CyMSVR1 << index)),
-					readb(base_addr + (CyMSVR2 << index)));
-#endif
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readb(base_addr +
-						(CyMSVR1 << index)) & CyDCD))) {
-				spin_unlock_irqrestore(&cinfo->card_lock, flags);
-				break;
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-
-		base_addr = cinfo->base_addr;
-		firm_id = base_addr + ID_ADDRESS;
-		if (!cyz_is_loaded(cinfo)) {
-			__set_current_state(TASK_RUNNING);
-			remove_wait_queue(&info->port.open_wait, &wait);
-			return -EINVAL;
-		}
-
-		zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
-								& 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
-		while (1) {
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS | C_RS_DTR);
-				retval = cyz_issue_cmd(cinfo,
-					channel, C_CM_IOCTLM, 0L);
-				if (retval != 0) {
-					printk(KERN_ERR "cyc:block_til_ready "
-						"retval on ttyC%d was %x\n",
-						info->line, retval);
-				}
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"Z DTR\n");
-#endif
-			}
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readl(&ch_ctrl[channel].rs_status) &
-						C_RS_DCD))) {
-				break;
-			}
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->port.open_wait, &wait);
-	if (!tty_hung_up_p(filp)) {
-		info->port.count++;
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
-			"count to %d\n", current->pid, info->port.count);
-#endif
-	}
-	info->port.blocked_open--;
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	if (retval)
-		return retval;
-	info->port.flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}				/* block_til_ready */
-
 /*
  * This routine is called whenever a serial port is opened.  It
  * performs the serial-specific initialization for the tty structure.
@@ -2436,7 +1598,6 @@
 	printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
 #endif
 	tty->driver_data = info;
-	info->port.tty = tty;
 	if (serial_paranoia_check(info, tty->name, "cy_open"))
 		return -ENODEV;
 
@@ -2462,11 +1623,11 @@
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = cy_startup(info, tty);
 	if (retval)
 		return retval;
 
-	retval = block_til_ready(tty, filp, info);
+	retval = tty_port_block_til_ready(&info->port, tty, filp);
 	if (retval) {
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
@@ -2476,6 +1637,7 @@
 	}
 
 	info->throttle = 0;
+	tty_port_tty_set(&info->port, tty);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc:cy_open done\n");
@@ -2490,8 +1652,6 @@
 {
 	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
 	unsigned long orig_jiffies;
 	int char_time;
 
@@ -2535,13 +1695,8 @@
 		timeout, char_time, jiffies);
 #endif
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-		while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
+		while (cyy_readb(info, CySRER) & CyTxRdy) {
 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
 			printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
 #endif
@@ -2595,103 +1750,37 @@
 }				/* cy_flush_buffer */
 
 
-/*
- * This routine is called when a particular tty device is closed.
- */
-static void cy_close(struct tty_struct *tty, struct file *filp)
+static void cy_do_close(struct tty_port *port)
 {
-	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+								port);
 	struct cyclades_card *card;
 	unsigned long flags;
-
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
-#endif
-
-	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
-		return;
+	int channel;
 
 	card = info->card;
-
-	spin_lock_irqsave(&card->card_lock, flags);
-	/* If the TTY is being hung up, nothing to do */
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		return;
-	}
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
-		info->port.count);
-#endif
-	if ((tty->count == 1) && (info->port.count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "cyc:cy_close: bad serial port count; "
-			"tty->count is 1, info->port.count is %d\n", info->port.count);
-		info->port.count = 1;
-	}
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG  "cyc:cy_close at (%d): decrementing count to %d\n",
-		current->pid, info->port.count - 1);
-#endif
-	if (--info->port.count < 0) {
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
-#endif
-		info->port.count = 0;
-	}
-	if (info->port.count) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		return;
-	}
-	info->port.flags |= ASYNC_CLOSING;
-
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	spin_unlock_irqrestore(&card->card_lock, flags);
-	if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->port.closing_wait);
-
+	channel = info->line - card->first_line;
 	spin_lock_irqsave(&card->card_lock, flags);
 
 	if (!cy_is_Z(card)) {
-		int channel = info->line - card->first_line;
-		int index = card->bus_index;
-		void __iomem *base_addr = card->base_addr +
-			(cy_chip_offset[channel >> 2] << index);
 		/* Stop accepting input */
-		channel &= 0x03;
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyRxData);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
 		if (info->port.flags & ASYNC_INITIALIZED) {
 			/* Waiting for on-board buffers to be empty before
 			   closing the port */
 			spin_unlock_irqrestore(&card->card_lock, flags);
-			cy_wait_until_sent(tty, info->timeout);
+			cy_wait_until_sent(port->tty, info->timeout);
 			spin_lock_irqsave(&card->card_lock, flags);
 		}
 	} else {
 #ifdef Z_WAKE
 		/* Waiting for on-board buffers to be empty before closing
 		   the port */
-		void __iomem *base_addr = card->base_addr;
-		struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
-		struct ZFW_CTRL __iomem *zfw_ctrl =
-		    base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
-		int channel = info->line - card->first_line;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		int retval;
 
-		if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+		if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
 			retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
 			if (retval != 0) {
 				printk(KERN_DEBUG "cyc:cy_close retval on "
@@ -2703,32 +1792,19 @@
 		}
 #endif
 	}
-
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	shutdown(info);
-	cy_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	spin_lock_irqsave(&card->card_lock, flags);
+	cy_shutdown(info, port->tty);
+}
 
-	tty->closing = 0;
-	info->port.tty = NULL;
-	if (info->port.blocked_open) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		if (info->port.close_delay) {
-			msleep_interruptible(jiffies_to_msecs
-						(info->port.close_delay));
-		}
-		wake_up_interruptible(&info->port.open_wait);
-		spin_lock_irqsave(&card->card_lock, flags);
-	}
-	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-	wake_up_interruptible(&info->port.close_wait);
-
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close done\n");
-#endif
-
-	spin_unlock_irqrestore(&card->card_lock, flags);
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void cy_close(struct tty_struct *tty, struct file *filp)
+{
+	struct cyclades_port *info = tty->driver_data;
+	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
+		return;
+	tty_port_close(&info->port, tty, filp);
 }				/* cy_close */
 
 /* This routine gets called when tty_write has put something into
@@ -2871,18 +1947,13 @@
 
 static int cy_chars_in_buffer(struct tty_struct *tty)
 {
-	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	int channel;
 
 	if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
 		return 0;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
-
 #ifdef Z_EXT_CHARS_IN_BUFFER
-	if (!cy_is_Z(card)) {
+	if (!cy_is_Z(info->card)) {
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
 #ifdef CY_DEBUG_IO
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2891,20 +1962,11 @@
 		return info->xmit_cnt;
 #ifdef Z_EXT_CHARS_IN_BUFFER
 	} else {
-		static struct FIRM_ID *firm_id;
-		static struct ZFW_CTRL *zfw_ctrl;
-		static struct CH_CTRL *ch_ctrl;
-		static struct BUF_CTRL *buf_ctrl;
+		struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 		int char_count;
 		__u32 tx_put, tx_get, tx_bufsize;
 
 		lock_kernel();
-		firm_id = card->base_addr + ID_ADDRESS;
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		tx_get = readl(&buf_ctrl->tx_get);
 		tx_put = readl(&buf_ctrl->tx_put);
 		tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -2957,48 +2019,44 @@
  * This routine finds or computes the various line characteristics.
  * It used to be called config_setup
  */
-static void set_line_char(struct cyclades_port *info)
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned cflag, iflag;
 	int baud, baud_rate = 0;
 	int i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!tty->termios) /* XXX can this happen at all? */
 		return;
 
 	if (info->line == -1)
 		return;
 
-	cflag = info->port.tty->termios->c_cflag;
-	iflag = info->port.tty->termios->c_iflag;
+	cflag = tty->termios->c_cflag;
+	iflag = tty->termios->c_iflag;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->port.tty) {
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->port.tty->alt_speed = 57600;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->port.tty->alt_speed = 115200;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->port.tty->alt_speed = 230400;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->port.tty->alt_speed = 460800;
-	}
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 	card = info->card;
 	channel = info->line - card->first_line;
 
 	if (!cy_is_Z(card)) {
-
-		index = card->bus_index;
+		u32 cflags;
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3107,124 +2165,68 @@
 	    cable.  Contact Marcio Saito for details.
 	 ***********************************************/
 
-		chip = channel >> 2;
 		channel &= 0x03;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
 		/* tx and rx baud rate */
 
-		cy_writeb(base_addr + (CyTCOR << index), info->tco);
-		cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
-		cy_writeb(base_addr + (CyRCOR << index), info->rco);
-		cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
+		cyy_writeb(info, CyTCOR, info->tco);
+		cyy_writeb(info, CyTBPR, info->tbpr);
+		cyy_writeb(info, CyRCOR, info->rco);
+		cyy_writeb(info, CyRBPR, info->rbpr);
 
 		/* set line characteristics  according configuration */
 
-		cy_writeb(base_addr + (CySCHR1 << index),
-			  START_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
-		cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
-		cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
+		cyy_writeb(info, CySCHR1, START_CHAR(tty));
+		cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
+		cyy_writeb(info, CyCOR1, info->cor1);
+		cyy_writeb(info, CyCOR2, info->cor2);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_writeb(info, CyCOR4, info->cor4);
+		cyy_writeb(info, CyCOR5, info->cor5);
 
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
-				CyCOR3ch, index);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+				CyCOR3ch);
 
 		/* !!! Is this needed? */
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		if (C_CLOCAL(info->port.tty)) {
-			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  (CyCTS | rflow_thr[i]));
-			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  CyCTS);
-			}
-			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
-		} else {
-			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				  readb(base_addr +
-					   (CySRER << index)) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  (CyDSR | CyCTS | CyRI | CyDCD |
-					   rflow_thr[i]));
-			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  CyDSR | CyCTS | CyRI | CyDCD);
-			}
-			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index),
-				  CyDSR | CyCTS | CyRI | CyDCD);
-		}
+		cflags = CyCTS;
+		if (!C_CLOCAL(tty))
+			cflags |= CyDSR | CyRI | CyDCD;
+		/* without modem intr */
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
+		/* act on 1->0 modem transitions */
+		if ((cflag & CRTSCTS) && info->rflow)
+			cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
+		else
+			cyy_writeb(info, CyMCOR1, cflags);
+		/* act on 0->1 modem transitions */
+		cyy_writeb(info, CyMCOR2, cflags);
 
-		if (i == 0) {	/* baud rate is zero, turn off line */
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		} else {
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
+		if (i == 0)	/* baud rate is zero, turn off line */
+			cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+		else
+			cyy_change_rts_dtr(info, TIOCM_DTR, 0);
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		__u32 sw_flow;
 		int retval;
 
-		firm_id = card->base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3335,45 +2337,38 @@
 				"was %x\n", info->line, retval);
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 }				/* set_line_char */
 
-static int
-get_serial_info(struct cyclades_port *info,
+static int cy_get_serial_info(struct cyclades_port *info,
 		struct serial_struct __user *retinfo)
 {
-	struct serial_struct tmp;
 	struct cyclades_card *cinfo = info->card;
-
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = (info->card - cy_card) * 0x100 + info->line -
-		cinfo->first_line;
-	tmp.irq = cinfo->irq;
-	tmp.flags = info->port.flags;
-	tmp.close_delay = info->port.close_delay;
-	tmp.closing_wait = info->port.closing_wait;
-	tmp.baud_base = info->baud;
-	tmp.custom_divisor = info->custom_divisor;
-	tmp.hub6 = 0;		/*!!! */
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = info->line,
+		.port = (info->card - cy_card) * 0x100 + info->line -
+			cinfo->first_line,
+		.irq = cinfo->irq,
+		.flags = info->port.flags,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
+		.baud_base = info->baud,
+		.custom_divisor = info->custom_divisor,
+		.hub6 = 0,		/*!!! */
+	};
 	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-}				/* get_serial_info */
+}
 
 static int
-set_serial_info(struct cyclades_port *info,
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
-	struct cyclades_port old_info;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
-	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
@@ -3403,10 +2398,10 @@
 
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
-		set_line_char(info);
+		cy_set_line_char(info, tty);
 		return 0;
 	} else {
-		return startup(info);
+		return cy_startup(info, tty);
 	}
 }				/* set_serial_info */
 
@@ -3422,24 +2417,14 @@
  */
 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 {
-	struct cyclades_card *card;
-	int chip, channel, index;
-	unsigned char status;
+	struct cyclades_card *card = info->card;
 	unsigned int result;
 	unsigned long flags;
-	void __iomem *base_addr;
+	u8 status;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		status = readb(base_addr + (CySRER << index)) &
-				(CyTxRdy | CyTxMpty);
+		status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 		result = (status ? 0 : TIOCSER_TEMT);
 	} else {
@@ -3453,34 +2438,23 @@
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
-	void __iomem *base_addr;
-	unsigned long flags;
-	unsigned char status;
-	unsigned long lstatus;
-	unsigned int result;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
+	int result;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
-	lock_kernel();
-
 	card = info->card;
-	channel = info->line - card->first_line;
+
+	lock_kernel();
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+		unsigned long flags;
+		int channel = info->line - card->first_line;
+		u8 status;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		status = readb(base_addr + (CyMSVR1 << index));
-		status |= readb(base_addr + (CyMSVR2 << index));
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		status = cyy_readb(info, CyMSVR1);
+		status |= cyy_readb(info, CyMSVR2);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 		if (info->rtsdtr_inv) {
@@ -3495,27 +2469,22 @@
 			((status & CyDSR) ? TIOCM_DSR : 0) |
 			((status & CyCTS) ? TIOCM_CTS : 0);
 	} else {
-		base_addr = card->base_addr;
-		firm_id = card->base_addr + ID_ADDRESS;
-		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
-			lstatus = readl(&ch_ctrl[channel].rs_status);
-			result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
-				((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
-				((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
-				((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
-				((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
-				((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
-		} else {
-			result = 0;
-			unlock_kernel();
-			return -ENODEV;
+		u32 lstatus;
+
+		if (!cyz_is_loaded(card)) {
+			result = -ENODEV;
+			goto end;
 		}
 
+		lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
+		result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+			((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+			((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+			((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+			((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
 	}
+end:
 	unlock_kernel();
 	return result;
 }				/* cy_tiomget */
@@ -3526,150 +2495,53 @@
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
-	void __iomem *base_addr;
 	unsigned long flags;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
-	int retval;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_change_rts_dtr(info, set, clear);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	} else {
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		int retval, channel = info->line - card->first_line;
+		u32 rs;
 
-		if (set & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
-		if (clear & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
+		if (!cyz_is_loaded(card))
+			return -ENODEV;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		rs = readl(&ch_ctrl->rs_control);
+		if (set & TIOCM_RTS)
+			rs |= C_RS_RTS;
+		if (clear & TIOCM_RTS)
+			rs &= ~C_RS_RTS;
 		if (set & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
+			rs |= C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
+			printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
 #endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
 		}
 		if (clear & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-
+			rs &= ~C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
+			printk(KERN_DEBUG "cyc:set_modem_info clearing "
+				"Z DTR\n");
 #endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
 		}
-	} else {
-		base_addr = card->base_addr;
-
-		firm_id = card->base_addr + ID_ADDRESS;
-		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
-
-			if (set & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
-					~C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (set & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_DTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info raising "
-					"Z DTR\n");
-#endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
-					~C_RS_DTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info clearing "
-					"Z DTR\n");
-#endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-		} else {
-			return -ENODEV;
-		}
-		spin_lock_irqsave(&card->card_lock, flags);
+		cy_writel(&ch_ctrl->rs_control, rs);
 		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+		spin_unlock_irqrestore(&card->card_lock, flags);
 		if (retval != 0) {
 			printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
 				"was %x\n", info->line, retval);
 		}
-		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
-}				/* cy_tiocmset */
+}
 
 /*
  * cy_break() --- routine which turns the break handling on or off
@@ -3734,41 +2606,18 @@
 	return retval;
 }				/* cy_break */
 
-static int get_mon_info(struct cyclades_port *info,
-				struct cyclades_monitor __user *mon)
-{
-
-	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
-		return -EFAULT;
-	info->mon.int_count = 0;
-	info->mon.char_count = 0;
-	info->mon.char_max = 0;
-	info->mon.char_last = 0;
-	return 0;
-}				/* get_mon_info */
-
 static int set_threshold(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr =
-		    card->base_addr + (cy_chip_offset[chip] << index);
-
 		info->cor3 &= ~CyREC_FIFO;
 		info->cor3 |= value & CyREC_FIFO;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -3777,55 +2626,23 @@
 static int get_threshold(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
+		u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
 		return put_user(tmp, value);
 	}
 	return 0;
 }				/* get_threshold */
 
-static int set_default_threshold(struct cyclades_port *info,
-							unsigned long value)
-{
-	info->default_threshold = value & 0x0f;
-	return 0;
-}				/* set_default_threshold */
-
-static int get_default_threshold(struct cyclades_port *info,
-						unsigned long __user *value)
-{
-	return put_user(info->default_threshold, value);
-}				/* get_default_threshold */
-
 static int set_timeout(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
+		cyy_writeb(info, CyRTPR, value & 0xff);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -3834,36 +2651,35 @@
 static int get_timeout(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyRTPR << index));
+		u8 tmp = cyy_readb(info, CyRTPR);
 		return put_user(tmp, value);
 	}
 	return 0;
 }				/* get_timeout */
 
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
+static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
+		struct cyclades_icount *cprev)
 {
-	info->default_timeout = value & 0xff;
-	return 0;
-}				/* set_default_timeout */
+	struct cyclades_icount cnow;
+	unsigned long flags;
+	int ret;
 
-static int get_default_timeout(struct cyclades_port *info,
-					unsigned long __user *value)
-{
-	return put_user(info->default_timeout, value);
-}				/* get_default_timeout */
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;	/* atomic copy */
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
 
 /*
  * This routine allows the tty driver to implement device-
@@ -3875,8 +2691,7 @@
 	 unsigned int cmd, unsigned long arg)
 {
 	struct cyclades_port *info = tty->driver_data;
-	struct cyclades_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
+	struct cyclades_icount cnow;	/* kernel counter temps */
 	int ret_val = 0;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -3892,7 +2707,11 @@
 
 	switch (cmd) {
 	case CYGETMON:
-		ret_val = get_mon_info(info, argp);
+		if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
+			ret_val = -EFAULT;
+			break;
+		}
+		memset(&info->mon, 0, sizeof(info->mon));
 		break;
 	case CYGETTHRESH:
 		ret_val = get_threshold(info, argp);
@@ -3901,10 +2720,11 @@
 		ret_val = set_threshold(info, arg);
 		break;
 	case CYGETDEFTHRESH:
-		ret_val = get_default_threshold(info, argp);
+		ret_val = put_user(info->default_threshold,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTHRESH:
-		ret_val = set_default_threshold(info, arg);
+		info->default_threshold = arg & 0x0f;
 		break;
 	case CYGETTIMEOUT:
 		ret_val = get_timeout(info, argp);
@@ -3913,21 +2733,20 @@
 		ret_val = set_timeout(info, arg);
 		break;
 	case CYGETDEFTIMEOUT:
-		ret_val = get_default_timeout(info, argp);
+		ret_val = put_user(info->default_timeout,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTIMEOUT:
-		ret_val = set_default_timeout(info, arg);
+		info->default_timeout = arg & 0xff;
 		break;
 	case CYSETRFLOW:
 		info->rflow = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRFLOW:
 		ret_val = info->rflow;
 		break;
 	case CYSETRTSDTR_INV:
 		info->rtsdtr_inv = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRTSDTR_INV:
 		ret_val = info->rtsdtr_inv;
@@ -3938,7 +2757,6 @@
 #ifndef CONFIG_CYZ_INTR
 	case CYZSETPOLLCYCLE:
 		cyz_polling_cycle = (arg * HZ) / 1000;
-		ret_val = 0;
 		break;
 	case CYZGETPOLLCYCLE:
 		ret_val = (cyz_polling_cycle * 1000) / HZ;
@@ -3946,16 +2764,15 @@
 #endif				/* CONFIG_CYZ_INTR */
 	case CYSETWAIT:
 		info->port.closing_wait = (unsigned short)arg * HZ / 100;
-		ret_val = 0;
 		break;
 	case CYGETWAIT:
 		ret_val = info->port.closing_wait / (HZ / 100);
 		break;
 	case TIOCGSERIAL:
-		ret_val = get_serial_info(info, argp);
+		ret_val = cy_get_serial_info(info, argp);
 		break;
 	case TIOCSSERIAL:
-		ret_val = set_serial_info(info, argp);
+		ret_val = cy_set_serial_info(info, tty, argp);
 		break;
 	case TIOCSERGETLSR:	/* Get line status register */
 		ret_val = get_lsr_info(info, argp);
@@ -3971,17 +2788,8 @@
 		/* note the counters on entry */
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		ret_val = wait_event_interruptible(info->delta_msr_wait, ({
-			cprev = cnow;
-			spin_lock_irqsave(&info->card->card_lock, flags);
-			cnow = info->icount;	/* atomic copy */
-			spin_unlock_irqrestore(&info->card->card_lock, flags);
-
-			((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
-		}));
+		ret_val = wait_event_interruptible(info->port.delta_msr_wait,
+				cy_cflags_changed(info, arg, &cnow));
 		break;
 
 		/*
@@ -3990,46 +2798,29 @@
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT:
+	case TIOCGICOUNT: {
+		struct serial_icounter_struct sic = { };
+
 		spin_lock_irqsave(&info->card->card_lock, flags);
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		p_cuser = argp;
-		ret_val = put_user(cnow.cts, &p_cuser->cts);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dsr, &p_cuser->dsr);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rng, &p_cuser->rng);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dcd, &p_cuser->dcd);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rx, &p_cuser->rx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.tx, &p_cuser->tx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.frame, &p_cuser->frame);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.overrun, &p_cuser->overrun);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.parity, &p_cuser->parity);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.brk, &p_cuser->brk);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (ret_val)
-			break;
-		ret_val = 0;
+
+		sic.cts = cnow.cts;
+		sic.dsr = cnow.dsr;
+		sic.rng = cnow.rng;
+		sic.dcd = cnow.dcd;
+		sic.rx = cnow.rx;
+		sic.tx = cnow.tx;
+		sic.frame = cnow.frame;
+		sic.overrun = cnow.overrun;
+		sic.parity = cnow.parity;
+		sic.brk = cnow.brk;
+		sic.buf_overrun = cnow.buf_overrun;
+
+		if (copy_to_user(argp, &sic, sizeof(sic)))
+			ret_val = -EFAULT;
 		break;
+	}
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
@@ -4055,7 +2846,7 @@
 	printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
 #endif
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 			!(tty->termios->c_cflag & CRTSCTS)) {
@@ -4112,8 +2903,6 @@
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -4135,24 +2924,9 @@
 	}
 
 	if (tty->termios->c_cflag & CRTSCTS) {
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 1;
@@ -4170,8 +2944,6 @@
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -4192,24 +2964,9 @@
 
 	if (tty->termios->c_cflag & CRTSCTS) {
 		card = info->card;
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
+			cyy_change_rts_dtr(info, TIOCM_RTS, 0);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 0;
@@ -4224,8 +2981,7 @@
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -4238,16 +2994,9 @@
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
 	if (!cy_is_Z(cinfo)) {
-		index = cinfo->bus_index;
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char)(channel & 0x0003)); /* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_stop */
@@ -4256,8 +3005,7 @@
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -4269,17 +3017,10 @@
 
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
-	index = cinfo->bus_index;
 	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char) (channel & 0x0003));	/* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_start */
@@ -4299,17 +3040,84 @@
 		return;
 
 	cy_flush_buffer(tty);
-	shutdown(info);
-	info->port.count = 0;
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
-		current->pid);
-#endif
-	info->port.tty = NULL;
-	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	wake_up_interruptible(&info->port.open_wait);
+	cy_shutdown(info, tty);
+	tty_port_hangup(&info->port);
 }				/* cy_hangup */
 
+static int cyy_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+	int channel = info->line - cinfo->first_line;
+	u32 cd;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_writeb(info, CyCAR, channel & 0x03);
+	cd = cyy_readb(info, CyMSVR1) & CyDCD;
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+
+	return cd;
+}
+
+static void cyy_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+			raise ? 0 : TIOCM_RTS | TIOCM_DTR);
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+}
+
+static int cyz_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+
+	return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
+}
+
+static void cyz_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+	int ret, channel = info->line - cinfo->first_line;
+	u32 rs;
+
+	rs = readl(&ch_ctrl->rs_control);
+	if (raise)
+		rs |= C_RS_RTS | C_RS_DTR;
+	else
+		rs &= ~(C_RS_RTS | C_RS_DTR);
+	cy_writel(&ch_ctrl->rs_control, rs);
+	ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
+	if (ret != 0)
+		printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
+				__func__, info->line, ret);
+#ifdef CY_DEBUG_DTR
+	printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
+#endif
+}
+
+static const struct tty_port_operations cyy_port_ops = {
+	.carrier_raised = cyy_carrier_raised,
+	.dtr_rts = cyy_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
+static const struct tty_port_operations cyz_port_ops = {
+	.carrier_raised = cyz_carrier_raised,
+	.dtr_rts = cyz_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
 /*
  * ---------------------------------------------------------------------
  * cy_init() and friends
@@ -4321,8 +3129,7 @@
 static int __devinit cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
-	unsigned int port;
-	unsigned short chip_number;
+	unsigned int channel, port;
 
 	spin_lock_init(&cinfo->card_lock);
 	cinfo->intr_enabled = 0;
@@ -4334,9 +3141,9 @@
 		return -ENOMEM;
 	}
 
-	for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
-			port++) {
-		info = &cinfo->ports[port - cinfo->first_line];
+	for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
+			channel++, port++) {
+		info = &cinfo->ports[channel];
 		tty_port_init(&info->port);
 		info->magic = CYCLADES_MAGIC;
 		info->card = cinfo;
@@ -4346,10 +3153,19 @@
 		info->port.close_delay = 5 * HZ / 10;
 		info->port.flags = STD_COM_FLAGS;
 		init_completion(&info->shutdown_wait);
-		init_waitqueue_head(&info->delta_msr_wait);
 
 		if (cy_is_Z(cinfo)) {
+			struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
+			struct ZFW_CTRL *zfw_ctrl;
+
+			info->port.ops = &cyz_port_ops;
 			info->type = PORT_STARTECH;
+
+			zfw_ctrl = cinfo->base_addr +
+				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
+			info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
+			info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
 			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
 			else
@@ -4359,17 +3175,20 @@
 				cyz_rx_restart, (unsigned long)info);
 #endif
 		} else {
+			unsigned short chip_number;
 			int index = cinfo->bus_index;
+
+			info->port.ops = &cyy_port_ops;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
 			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
 			info->cor2 = CyETC;
 			info->cor3 = 0x08;	/* _very_ small rcv threshold */
 
-			chip_number = (port - cinfo->first_line) / 4;
-			info->chip_rev = readb(cinfo->base_addr +
-				      (cy_chip_offset[chip_number] << index) +
-				      (CyGFRCR << index));
+			chip_number = channel / CyPORTS_PER_CHIP;
+			info->u.cyy.base_addr = cinfo->base_addr +
+				(cy_chip_offset[chip_number] << index);
+			info->chip_rev = cyy_readb(info, CyGFRCR);
 
 			if (info->chip_rev >= CD1400_REV_J) {
 				/* It is a CD1400 rev. J or later */
@@ -5060,8 +3879,14 @@
 		}
 		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
 	} else {
+		struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
+		struct ZFW_CTRL __iomem *zfw_ctrl;
+
+		zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+
 		cy_card[card_no].hw_ver = mailbox;
 		cy_card[card_no].num_chips = (unsigned int)-1;
+		cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
 #ifdef CONFIG_CYZ_INTR
 		/* allocate IRQ only if board has an IRQ */
 		if (irq != 0 && irq != 255) {
@@ -5191,18 +4016,30 @@
 		for (j = 0; j < cy_card[i].nports; j++) {
 			info = &cy_card[i].ports[j];
 
-			if (info->port.count)
+			if (info->port.count) {
+				/* XXX is the ldisc num worth this? */
+				struct tty_struct *tty;
+				struct tty_ldisc *ld;
+				int num = 0;
+				tty = tty_port_tty_get(&info->port);
+				if (tty) {
+					ld = tty_ldisc_ref(tty);
+					if (ld) {
+						num = ld->ops->num;
+						tty_ldisc_deref(ld);
+					}
+					tty_kref_put(tty);
+				}
 				seq_printf(m, "%3d %8lu %10lu %8lu "
-					"%10lu %8lu %9lu %6ld\n", info->line,
+					"%10lu %8lu %9lu %6d\n", info->line,
 					(cur_jifs - info->idle_stats.in_use) /
 					HZ, info->idle_stats.xmit_bytes,
 					(cur_jifs - info->idle_stats.xmit_idle)/
 					HZ, info->idle_stats.recv_bytes,
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
-					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc->ops->num);
-			else
+					num);
+			} else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
 					info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index a5c59fc..b19d43c 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -572,7 +572,7 @@
 			info->icount.dcd++;
 		if (status & UART_MSR_DCTS)
 			info->icount.cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 	}
 
 	if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
@@ -927,7 +927,7 @@
 	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 	 * here so the queue might never be waken up
 	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&info->port.delta_msr_wait);
 	wake_up_interruptible(&info->break_wait);
 
 	/* stop a DMA transfer on the port being closed */
@@ -1800,7 +1800,7 @@
 		spin_unlock_irqrestore(&info->lock, flags);
 		while (1) {
 			/* FIXME: convert to new style wakeup */
-			interruptible_sleep_on(&info->delta_msr_wait);
+			interruptible_sleep_on(&info->port.delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
@@ -2452,7 +2452,6 @@
 		info->config.flow_off = flow_off;
 		info->config.pio_threshold = pio_threshold;
 		info->next_port = ports;
-		init_waitqueue_head(&info->delta_msr_wait);
 		init_waitqueue_head(&info->break_wait);
 		ports = info;
 		printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4f1f4cd..426bfdd 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -846,37 +846,53 @@
 	return (ip->status & ISI_DCD)?1 : 0;
 }
 
-static int isicom_open(struct tty_struct *tty, struct file *filp)
+static struct tty_port *isicom_find_port(struct tty_struct *tty)
 {
 	struct isi_port *port;
 	struct isi_board *card;
 	unsigned int board;
-	int error, line;
+	int line = tty->index;
 
-	line = tty->index;
 	if (line < 0 || line > PORT_COUNT-1)
-		return -ENODEV;
+		return NULL;
 	board = BOARD(line);
 	card = &isi_card[board];
 
 	if (!(card->status & FIRMWARE_LOADED))
-		return -ENODEV;
+		return NULL;
 
 	/*  open on a port greater than the port count for the card !!! */
 	if (line > ((board * 16) + card->port_count - 1))
-		return -ENODEV;
+		return NULL;
 
 	port = &isi_ports[line];
 	if (isicom_paranoia_check(port, tty->name, "isicom_open"))
-		return -ENODEV;
+		return NULL;
 
+	return &port->port;
+}
+	
+static int isicom_open(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *port;
+	struct isi_board *card;
+	struct tty_port *tport;
+	int error = 0;
+
+	tport = isicom_find_port(tty);
+	if (tport == NULL)
+		return -ENODEV;
+	port = container_of(tport, struct isi_port, port);
+	card = &isi_card[BOARD(tty->index)];
 	isicom_setup_board(card);
 
 	/* FIXME: locking on port.count etc */
 	port->port.count++;
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
-	error = isicom_setup_port(tty);
+	/* FIXME: Locking on Initialized flag */
+	if (!test_bit(ASYNCB_INITIALIZED, &tport->flags))
+		error = isicom_setup_port(tty);
 	if (error == 0)
 		error = tty_port_block_til_ready(&port->port, tty, filp);
 	return error;
@@ -952,19 +968,12 @@
 	tty_wakeup(tty);
 }
 
-static void isicom_close(struct tty_struct *tty, struct file *filp)
+static void isicom_close_port(struct tty_port *port)
 {
-	struct isi_port *ip = tty->driver_data;
-	struct tty_port *port = &ip->port;
-	struct isi_board *card;
+	struct isi_port *ip = container_of(port, struct isi_port, port);
+	struct isi_board *card = ip->card;
 	unsigned long flags;
 
-	BUG_ON(!ip);
-
-	card = ip->card;
-	if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
-		return;
-
 	/* indicate to the card that no more data can be received
 	   on this port */
 	spin_lock_irqsave(&card->card_lock, flags);
@@ -974,9 +983,19 @@
 	}
 	isicom_shutdown_port(ip);
 	spin_unlock_irqrestore(&card->card_lock, flags);
+}
 
+static void isicom_close(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *ip = tty->driver_data;
+	struct tty_port *port = &ip->port;
+	if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
+		return;
+
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	isicom_close_port(port);
 	isicom_flush_buffer(tty);
-	
 	tty_port_close_end(port, tty);
 }
 
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index dbf8d52..5e28d39 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -48,7 +48,7 @@
 
 #include "mxser.h"
 
-#define	MXSER_VERSION	"2.0.4"		/* 1.12 */
+#define	MXSER_VERSION	"2.0.5"		/* 1.14 */
 #define	MXSERMAJOR	 174
 
 #define MXSER_BOARDS		4	/* Max. boards */
@@ -69,6 +69,7 @@
 #define PCI_DEVICE_ID_POS104UL	0x1044
 #define PCI_DEVICE_ID_CB108	0x1080
 #define PCI_DEVICE_ID_CP102UF	0x1023
+#define PCI_DEVICE_ID_CP112UL	0x1120
 #define PCI_DEVICE_ID_CB114	0x1142
 #define PCI_DEVICE_ID_CP114UL	0x1143
 #define PCI_DEVICE_ID_CB134I	0x1341
@@ -139,7 +140,8 @@
 	{ "CP-138U series",	8, },
 	{ "POS-104UL series",	4, },
 	{ "CP-114UL series",	4, },
-/*30*/	{ "CP-102UF series",	2, }
+/*30*/	{ "CP-102UF series",	2, },
+	{ "CP-112UL series",	2, },
 };
 
 /* driver_data correspond to the lines in the structure above
@@ -170,6 +172,7 @@
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL),	.driver_data = 28 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL),	.driver_data = 29 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF),	.driver_data = 30 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL),	.driver_data = 31 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
@@ -258,7 +261,6 @@
 	struct mxser_mon mon_data;
 
 	spinlock_t slock;
-	wait_queue_head_t delta_msr_wait;
 };
 
 struct mxser_board {
@@ -818,7 +820,7 @@
 	if (status & UART_MSR_DCTS)
 		port->icount.cts++;
 	port->mon_data.modem_status = status;
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 
 	if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
 		if (status & UART_MSR_DCD)
@@ -973,7 +975,7 @@
 	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 	 * here so the queue might never be waken up
 	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&info->port.delta_msr_wait);
 
 	/*
 	 * Free the IRQ, if necessary
@@ -1073,34 +1075,17 @@
 }
 
 
-/*
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- */
-static void mxser_close(struct tty_struct *tty, struct file *filp)
+static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)
 {
-	struct mxser_port *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-
+	struct mxser_port *info = container_of(port, struct mxser_port, port);
 	unsigned long timeout;
-
-	if (tty->index == MXSER_PORTS)
-		return;
-	if (!info)
-		return;
-
-	if (tty_port_close_start(port, tty, filp) == 0)
-		return;
-
 	/*
 	 * Save the termios structure, since this port may have
 	 * separate termios for callout and dialin.
 	 *
 	 * FIXME: Can this go ?
 	 */
-	if (info->port.flags & ASYNC_NORMAL_ACTIVE)
+	if (port->flags & ASYNC_NORMAL_ACTIVE)
 		info->normal_termios = *tty->termios;
 	/*
 	 * At this point we stop accepting input.  To do this, we
@@ -1112,7 +1097,7 @@
 	if (info->board->chip_flag)
 		info->IER &= ~MOXA_MUST_RECV_ISR;
 
-	if (info->port.flags & ASYNC_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		outb(info->IER, info->ioaddr + UART_IER);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
@@ -1127,8 +1112,26 @@
 		}
 	}
 	mxser_shutdown(tty);
-	mxser_flush_buffer(tty);
 
+}
+
+/*
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+
+	if (tty->index == MXSER_PORTS)
+		return;
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	mxser_close_port(tty, port);
+	mxser_flush_buffer(tty);
 	/* Right now the tty_port set is done outside of the close_end helper
 	   as we don't yet have everyone using refcounts */	
 	tty_port_close_end(port, tty);
@@ -1761,7 +1764,7 @@
 		cnow = info->icount;	/* note the counters on entry */
 		spin_unlock_irqrestore(&info->slock, flags);
 
-		return wait_event_interruptible(info->delta_msr_wait,
+		return wait_event_interruptible(info->port.delta_msr_wait,
 				mxser_cflags_changed(info, arg, &cnow));
 	/*
 	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
@@ -1803,7 +1806,7 @@
 
 		lock_kernel();
 		len = mxser_chars_in_buffer(tty);
-		lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
+		lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
 		len += (lsr ? 0 : 1);
 		unlock_kernel();
 
@@ -2413,7 +2416,6 @@
 		info->port.close_delay = 5 * HZ / 10;
 		info->port.closing_wait = 30 * HZ;
 		info->normal_termios = mxvar_sdriver->init_termios;
-		init_waitqueue_head(&info->delta_msr_wait);
 		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
 		info->err_shadow = 0;
 		spin_lock_init(&info->slock);
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 4e28b35..2e50f4d 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -272,7 +272,8 @@
  *
  *	This is a helper function that handles one output character
  *	(including special characters like TAB, CR, LF, etc.),
- *	putting the results in the tty driver's write buffer.
+ *	doing OPOST processing and putting the results in the
+ *	tty driver's write buffer.
  *
  *	Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY
  *	and NLDLY.  They simply aren't relevant in the world today.
@@ -350,8 +351,9 @@
  *	@c: character (or partial unicode symbol)
  *	@tty: terminal device
  *
- *	Perform OPOST processing.  Returns -1 when the output device is
- *	full and the character must be retried.
+ *	Output one character with OPOST processing.
+ *	Returns -1 when the output device is full and the character
+ *	must be retried.
  *
  *	Locking: output_lock to protect column state and space left
  *		 (also, this is called from n_tty_write under the
@@ -377,8 +379,11 @@
 /**
  *	process_output_block		-	block post processor
  *	@tty: terminal device
- *	@inbuf: user buffer
- *	@nr: number of bytes
+ *	@buf: character buffer
+ *	@nr: number of bytes to output
+ *
+ *	Output a block of characters with OPOST processing.
+ *	Returns the number of characters output.
  *
  *	This path is used to speed up block console writes, among other
  *	things when processing blocks of output data. It handles only
@@ -571,33 +576,23 @@
 				break;
 
 			default:
-				if (iscntrl(op)) {
-					if (L_ECHOCTL(tty)) {
-						/*
-						 * Ensure there is enough space
-						 * for the whole ctrl pair.
-						 */
-						if (space < 2) {
-							no_space_left = 1;
-							break;
-						}
-						tty_put_char(tty, '^');
-						tty_put_char(tty, op ^ 0100);
-						tty->column += 2;
-						space -= 2;
-					} else {
-						if (!space) {
-							no_space_left = 1;
-							break;
-						}
-						tty_put_char(tty, op);
-						space--;
-					}
-				}
 				/*
-				 * If above falls through, this was an
-				 * undefined op.
+				 * If the op is not a special byte code,
+				 * it is a ctrl char tagged to be echoed
+				 * as "^X" (where X is the letter
+				 * representing the control char).
+				 * Note that we must ensure there is
+				 * enough space for the whole ctrl pair.
+				 *
 				 */
+				if (space < 2) {
+					no_space_left = 1;
+					break;
+				}
+				tty_put_char(tty, '^');
+				tty_put_char(tty, op ^ 0100);
+				tty->column += 2;
+				space -= 2;
 				cp += 2;
 				nr -= 2;
 			}
@@ -605,12 +600,18 @@
 			if (no_space_left)
 				break;
 		} else {
-			int retval;
-
-			retval = do_output_char(c, tty, space);
-			if (retval < 0)
-				break;
-			space -= retval;
+			if (O_OPOST(tty) &&
+			    !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) {
+				int retval = do_output_char(c, tty, space);
+				if (retval < 0)
+					break;
+				space -= retval;
+			} else {
+				if (!space)
+					break;
+				tty_put_char(tty, c);
+				space -= 1;
+			}
 			cp += 1;
 			nr -= 1;
 		}
@@ -798,8 +799,8 @@
  *	Echo user input back onto the screen. This must be called only when
  *	L_ECHO(tty) is true. Called from the driver receive_buf path.
  *
- *	This variant tags control characters to be possibly echoed as
- *	as "^X" (where X is the letter representing the control char).
+ *	This variant tags control characters to be echoed as "^X"
+ *	(where X is the letter representing the control char).
  *
  *	Locking: echo_lock to protect the echo buffer
  */
@@ -812,7 +813,7 @@
 		add_echo_byte(ECHO_OP_START, tty);
 		add_echo_byte(ECHO_OP_START, tty);
 	} else {
-		if (iscntrl(c) && c != '\t')
+		if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
 			add_echo_byte(ECHO_OP_START, tty);
 		add_echo_byte(c, tty);
 	}
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 171711a..3cfa22d 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -343,7 +343,7 @@
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 #ifdef RC_REPORT_OVERRUN
 	status = rc_in(bp, CD180_RCSR);
@@ -355,18 +355,18 @@
 #endif
 	ch = rc_in(bp, CD180_RDR);
 	if (!status)
-		return;
+		goto out;
 	if (status & RCSR_TOUT)  {
 		printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
 				    "Hardware problems ?\n",
 		       board_No(bp), port_No(port));
-		return;
+		goto out;
 
 	} else if (status & RCSR_BREAK)  {
 		printk(KERN_INFO "rc%d: port %d: Handling break...\n",
 		       board_No(bp), port_No(port));
 		flag = TTY_BREAK;
-		if (port->port.flags & ASYNC_SAK)
+		if (tty && (port->port.flags & ASYNC_SAK))
 			do_SAK(tty);
 
 	} else if (status & RCSR_PE)
@@ -380,8 +380,12 @@
 	else
 		flag = TTY_NORMAL;
 
-	tty_insert_flip_char(tty, ch, flag);
-	tty_flip_buffer_push(tty);
+	if (tty) {
+		tty_insert_flip_char(tty, ch, flag);
+		tty_flip_buffer_push(tty);
+	}
+out:
+	tty_kref_put(tty);
 }
 
 static void rc_receive(struct riscom_board const *bp)
@@ -394,7 +398,7 @@
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	count = rc_in(bp, CD180_RDCR);
 
@@ -403,15 +407,14 @@
 #endif
 
 	while (count--)  {
-		if (tty_buffer_request_room(tty, 1) == 0)  {
-			printk(KERN_WARNING "rc%d: port %d: Working around "
-					    "flip buffer overflow.\n",
-			       board_No(bp), port_No(port));
-			break;
-		}
-		tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
+		u8 ch = rc_in(bp, CD180_RDR);
+		if (tty)
+			tty_insert_flip_char(tty, ch, TTY_NORMAL);
 	}
-	tty_flip_buffer_push(tty);
+	if (tty) {
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
+	}
 }
 
 static void rc_transmit(struct riscom_board const *bp)
@@ -424,22 +427,22 @@
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (port->IER & IER_TXEMPTY) {
 		/* FIFO drained */
 		rc_out(bp, CD180_CAR, port_No(port));
 		port->IER &= ~IER_TXEMPTY;
 		rc_out(bp, CD180_IER, port->IER);
-		return;
+		goto out;
 	}
 
 	if ((port->xmit_cnt <= 0 && !port->break_length)
-	    || tty->stopped || tty->hw_stopped)  {
+	    || (tty && (tty->stopped || tty->hw_stopped)))  {
 		rc_out(bp, CD180_CAR, port_No(port));
 		port->IER &= ~IER_TXRDY;
 		rc_out(bp, CD180_IER, port->IER);
-		return;
+		goto out;
 	}
 
 	if (port->break_length)  {
@@ -464,7 +467,7 @@
 			rc_out(bp, CD180_CCR, CCR_CORCHG2);
 			port->break_length = 0;
 		}
-		return;
+		goto out;
 	}
 
 	count = CD180_NFIFO;
@@ -480,8 +483,10 @@
 		port->IER &= ~IER_TXRDY;
 		rc_out(bp, CD180_IER, port->IER);
 	}
-	if (port->xmit_cnt <= port->wakeup_chars)
+	if (tty && port->xmit_cnt <= port->wakeup_chars)
 		tty_wakeup(tty);
+out:
+	tty_kref_put(tty);
 }
 
 static void rc_check_modem(struct riscom_board const *bp)
@@ -494,37 +499,43 @@
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	mcr = rc_in(bp, CD180_MCR);
 	if (mcr & MCR_CDCHG) {
 		if (rc_in(bp, CD180_MSVR) & MSVR_CD)
 			wake_up_interruptible(&port->port.open_wait);
-		else
+		else if (tty)
 			tty_hangup(tty);
 	}
 
 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 	if (mcr & MCR_CTSCHG)  {
 		if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
-			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
+			if (tty) {
+				tty->hw_stopped = 0;
+				if (port->xmit_cnt <= port->wakeup_chars)
+					tty_wakeup(tty);
+			}
 		} else  {
-			tty->hw_stopped = 1;
+			if (tty)
+				tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
 		}
 		rc_out(bp, CD180_IER, port->IER);
 	}
 	if (mcr & MCR_DSRCHG)  {
 		if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
-			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
+			if (tty) {
+				tty->hw_stopped = 0;
+				if (port->xmit_cnt <= port->wakeup_chars)
+					tty_wakeup(tty);
+			}
 		} else  {
-			tty->hw_stopped = 1;
+			if (tty)
+				tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
 		}
 		rc_out(bp, CD180_IER, port->IER);
@@ -533,6 +544,7 @@
 
 	/* Clear change bits */
 	rc_out(bp, CD180_MCR, 0);
+	tty_kref_put(tty);
 }
 
 /* The main interrupt processing routine */
@@ -632,9 +644,9 @@
  * Setting up port characteristics.
  * Must be called with disabled interrupts
  */
-static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
+static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
+						struct riscom_port *port)
 {
-	struct tty_struct *tty = port->port.tty;
 	unsigned long baud;
 	long tmp;
 	unsigned char cor1 = 0, cor3 = 0;
@@ -781,7 +793,8 @@
 }
 
 /* Must be called with interrupts enabled */
-static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
+static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
+						struct riscom_port *port)
 {
 	unsigned long flags;
 
@@ -793,11 +806,11 @@
 
 	spin_lock_irqsave(&riscom_lock, flags);
 
-	clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+	clear_bit(TTY_IO_ERROR, &tty->flags);
 	if (port->port.count == 1)
 		bp->count++;
 	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	rc_change_speed(bp, port);
+	rc_change_speed(tty, bp, port);
 	port->port.flags |= ASYNC_INITIALIZED;
 
 	spin_unlock_irqrestore(&riscom_lock, flags);
@@ -898,9 +911,9 @@
 
 	port->port.count++;
 	tty->driver_data = port;
-	port->port.tty = tty;
+	tty_port_tty_set(&port->port, tty);
 
-	error = rc_setup_port(bp, port);
+	error = rc_setup_port(tty, bp, port);
 	if (error == 0)
 		error = tty_port_block_til_ready(&port->port, tty, filp);
 	return error;
@@ -921,20 +934,12 @@
 	tty_wakeup(tty);
 }
 
-static void rc_close(struct tty_struct *tty, struct file *filp)
+static void rc_close_port(struct tty_port *port)
 {
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
 	unsigned long flags;
+	struct riscom_port *rp = container_of(port, struct riscom_port, port);
+	struct riscom_board *bp = port_Board(rp);
 	unsigned long timeout;
-
-	if (!port || rc_paranoia_check(port, tty->name, "close"))
-		return;
-
-	bp = port_Board(port);
-	
-	if (tty_port_close_start(&port->port, tty, filp) == 0)
-		return;
 	
 	/*
 	 * At this point we stop accepting input.  To do this, we
@@ -944,31 +949,37 @@
 	 */
 
 	spin_lock_irqsave(&riscom_lock, flags);
-	port->IER &= ~IER_RXD;
-	if (port->port.flags & ASYNC_INITIALIZED) {
-		port->IER &= ~IER_TXRDY;
-		port->IER |= IER_TXEMPTY;
-		rc_out(bp, CD180_CAR, port_No(port));
-		rc_out(bp, CD180_IER, port->IER);
+	rp->IER &= ~IER_RXD;
+	if (port->flags & ASYNC_INITIALIZED) {
+		rp->IER &= ~IER_TXRDY;
+		rp->IER |= IER_TXEMPTY;
+		rc_out(bp, CD180_CAR, port_No(rp));
+		rc_out(bp, CD180_IER, rp->IER);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
 		timeout = jiffies + HZ;
-		while (port->IER & IER_TXEMPTY) {
+		while (rp->IER & IER_TXEMPTY) {
 			spin_unlock_irqrestore(&riscom_lock, flags);
-			msleep_interruptible(jiffies_to_msecs(port->timeout));
+			msleep_interruptible(jiffies_to_msecs(rp->timeout));
 			spin_lock_irqsave(&riscom_lock, flags);
 			if (time_after(jiffies, timeout))
 				break;
 		}
 	}
-	rc_shutdown_port(tty, bp, port);
-	rc_flush_buffer(tty);
+	rc_shutdown_port(port->tty, bp, rp);
 	spin_unlock_irqrestore(&riscom_lock, flags);
+}
 
-	tty_port_close_end(&port->port, tty);
+static void rc_close(struct tty_struct *tty, struct file *filp)
+{
+	struct riscom_port *port = tty->driver_data;
+
+	if (!port || rc_paranoia_check(port, tty->name, "close"))
+		return;
+	tty_port_close(&port->port, tty, filp);
 }
 
 static int rc_write(struct tty_struct *tty,
@@ -1170,7 +1181,7 @@
 	return 0;
 }
 
-static int rc_set_serial_info(struct riscom_port *port,
+static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
 				     struct serial_struct __user *newinfo)
 {
 	struct serial_struct tmp;
@@ -1180,17 +1191,6 @@
 	if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
 		return -EFAULT;
 
-#if 0
-	if ((tmp.irq != bp->irq) ||
-	    (tmp.port != bp->base) ||
-	    (tmp.type != PORT_CIRRUS) ||
-	    (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
-	    (tmp.custom_divisor != 0) ||
-	    (tmp.xmit_fifo_size != CD180_NFIFO) ||
-	    (tmp.flags & ~RISCOM_LEGAL_FLAGS))
-		return -EINVAL;
-#endif
-
 	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
 			(tmp.flags & ASYNC_SPD_MASK));
 
@@ -1212,7 +1212,7 @@
 		unsigned long flags;
 
 		spin_lock_irqsave(&riscom_lock, flags);
-		rc_change_speed(bp, port);
+		rc_change_speed(tty, bp, port);
 		spin_unlock_irqrestore(&riscom_lock, flags);
 	}
 	return 0;
@@ -1255,7 +1255,7 @@
 		break;
 	case TIOCSSERIAL:
 		lock_kernel();
-		retval = rc_set_serial_info(port, argp);
+		retval = rc_set_serial_info(tty, port, argp);
 		unlock_kernel();
 		break;
 	default:
@@ -1350,21 +1350,12 @@
 static void rc_hangup(struct tty_struct *tty)
 {
 	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
 
 	if (rc_paranoia_check(port, tty->name, "rc_hangup"))
 		return;
 
-	bp = port_Board(port);
-
-	rc_shutdown_port(tty, bp, port);
-	spin_lock_irqsave(&port->port.lock, flags);
-	port->port.count = 0;
-	port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	port->port.tty = NULL;
-	wake_up_interruptible(&port->port.open_wait);
-	spin_unlock_irqrestore(&port->port.lock, flags);
+	rc_shutdown_port(tty, port_Board(port), port);
+	tty_port_hangup(&port->port);
 }
 
 static void rc_set_termios(struct tty_struct *tty,
@@ -1377,7 +1368,7 @@
 		return;
 
 	spin_lock_irqsave(&riscom_lock, flags);
-	rc_change_speed(port_Board(port), port);
+	rc_change_speed(tty, port_Board(port), port);
 	spin_unlock_irqrestore(&riscom_lock, flags);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1410,6 +1401,7 @@
 
 static const struct tty_port_operations riscom_port_ops = {
 	.carrier_raised = carrier_raised,
+	.shutdown = rc_close_port,
 };
 
 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index c70d9da..ea18a12 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1184,6 +1184,7 @@
 	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_init_termios);
 
 /**
  *	tty_driver_install_tty() - install a tty entry in the driver
@@ -1386,10 +1387,14 @@
  *		tty_mutex - sometimes only
  *		takes the file list lock internally when working on the list
  *	of ttys that the driver keeps.
+ *
+ *	This method gets called from a work queue so that the driver private
+ *	shutdown ops can sleep (needed for USB at least)
  */
-static void release_one_tty(struct kref *kref)
+static void release_one_tty(struct work_struct *work)
 {
-	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+	struct tty_struct *tty =
+		container_of(work, struct tty_struct, hangup_work);
 	struct tty_driver *driver = tty->driver;
 
 	if (tty->ops->shutdown)
@@ -1407,6 +1412,15 @@
 	free_tty_struct(tty);
 }
 
+static void queue_release_one_tty(struct kref *kref)
+{
+	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+	/* The hangup queue is now free so we can reuse it rather than
+	   waste a chunk of memory for each port */
+	INIT_WORK(&tty->hangup_work, release_one_tty);
+	schedule_work(&tty->hangup_work);
+}
+
 /**
  *	tty_kref_put		-	release a tty kref
  *	@tty: tty device
@@ -1418,7 +1432,7 @@
 void tty_kref_put(struct tty_struct *tty)
 {
 	if (tty)
-		kref_put(&tty->kref, release_one_tty);
+		kref_put(&tty->kref, queue_release_one_tty);
 }
 EXPORT_SYMBOL(tty_kref_put);
 
@@ -2085,7 +2099,7 @@
  *	the generic functionality existed. This piece of history is preserved
  *	in the expected tty API of posix OS's.
  *
- *	Locking: none, the open fle handle ensures it won't go away.
+ *	Locking: none, the open file handle ensures it won't go away.
  */
 
 static int fionbio(struct file *file, int __user *p)
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index ad6ba4e..8e67d5c 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -393,9 +393,7 @@
 		termios->c_cflag |= (BOTHER << IBSHIFT);
 #else
 	if (ifound == -1 || ofound == -1) {
-		static int warned;
-		if (!warned++)
-			printk(KERN_WARNING "tty: Unable to return correct "
+		printk_once(KERN_WARNING "tty: Unable to return correct "
 			  "speed data as your architecture needs updating.\n");
 	}
 #endif
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index e48af9f..aafdbae 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -145,48 +145,33 @@
 }
 EXPORT_SYMBOL(tty_unregister_ldisc);
 
-
-/**
- *	tty_ldisc_try_get	-	try and reference an ldisc
- *	@disc: ldisc number
- *
- *	Attempt to open and lock a line discipline into place. Return
- *	the line discipline refcounted or an error.
- */
-
-static struct tty_ldisc *tty_ldisc_try_get(int disc)
+static struct tty_ldisc_ops *get_ldops(int disc)
 {
 	unsigned long flags;
-	struct tty_ldisc *ld;
-	struct tty_ldisc_ops *ldops;
-	int err = -EINVAL;
-
-	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
-	if (ld == NULL)
-		return ERR_PTR(-ENOMEM);
+	struct tty_ldisc_ops *ldops, *ret;
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld->ops = NULL;
+	ret = ERR_PTR(-EINVAL);
 	ldops = tty_ldiscs[disc];
-	/* Check the entry is defined */
 	if (ldops) {
-		/* If the module is being unloaded we can't use it */
-		if (!try_module_get(ldops->owner))
-			err = -EAGAIN;
-		else {
-			/* lock it */
+		ret = ERR_PTR(-EAGAIN);
+		if (try_module_get(ldops->owner)) {
 			ldops->refcount++;
-			ld->ops = ldops;
-			atomic_set(&ld->users, 1);
-			err = 0;
+			ret = ldops;
 		}
 	}
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	if (err) {
-		kfree(ld);
-		return ERR_PTR(err);
-	}
-	return ld;
+	return ret;
+}
+
+static void put_ldops(struct tty_ldisc_ops *ldops)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ldops->refcount--;
+	module_put(ldops->owner);
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 }
 
 /**
@@ -205,14 +190,31 @@
 static struct tty_ldisc *tty_ldisc_get(int disc)
 {
 	struct tty_ldisc *ld;
+	struct tty_ldisc_ops *ldops;
 
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return ERR_PTR(-EINVAL);
-	ld = tty_ldisc_try_get(disc);
-	if (IS_ERR(ld)) {
+
+	/*
+	 * Get the ldisc ops - we may need to request them to be loaded
+	 * dynamically and try again.
+	 */
+	ldops = get_ldops(disc);
+	if (IS_ERR(ldops)) {
 		request_module("tty-ldisc-%d", disc);
-		ld = tty_ldisc_try_get(disc);
+		ldops = get_ldops(disc);
+		if (IS_ERR(ldops))
+			return ERR_CAST(ldops);
 	}
+
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+	if (ld == NULL) {
+		put_ldops(ldops);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ld->ops = ldops;
+	atomic_set(&ld->users, 1);
 	return ld;
 }
 
@@ -234,13 +236,13 @@
 static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
 {
 	int i = *(loff_t *)v;
-	struct tty_ldisc *ld;
+	struct tty_ldisc_ops *ldops;
 
-	ld = tty_ldisc_try_get(i);
-	if (IS_ERR(ld))
+	ldops = get_ldops(i);
+	if (IS_ERR(ldops))
 		return 0;
-	seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
-	put_ldisc(ld);
+	seq_printf(m, "%-10s %2d\n", ldops->name ? ldops->name : "???", i);
+	put_ldops(ldops);
 	return 0;
 }
 
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9769b11..a4bbb28 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -23,6 +23,7 @@
 	memset(port, 0, sizeof(*port));
 	init_waitqueue_head(&port->open_wait);
 	init_waitqueue_head(&port->close_wait);
+	init_waitqueue_head(&port->delta_msr_wait);
 	mutex_init(&port->mutex);
 	spin_lock_init(&port->lock);
 	port->close_delay = (50 * HZ) / 100;
@@ -96,6 +97,14 @@
 }
 EXPORT_SYMBOL(tty_port_tty_set);
 
+static void tty_port_shutdown(struct tty_port *port)
+{
+	if (port->ops->shutdown &&
+		test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
+			port->ops->shutdown(port);
+
+}
+
 /**
  *	tty_port_hangup		-	hangup helper
  *	@port: tty port
@@ -116,6 +125,8 @@
 	port->tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
 	wake_up_interruptible(&port->open_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
+	tty_port_shutdown(port);
 }
 EXPORT_SYMBOL(tty_port_hangup);
 
@@ -296,15 +307,17 @@
 
 	if (port->count) {
 		spin_unlock_irqrestore(&port->lock, flags);
+		if (port->ops->drop)
+			port->ops->drop(port);
 		return 0;
 	}
-	port->flags |= ASYNC_CLOSING;
+	set_bit(ASYNCB_CLOSING, &port->flags);
 	tty->closing = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
 	/* Don't block on a stalled port, just pull the chain */
 	if (tty->flow_stopped)
 		tty_driver_flush_buffer(tty);
-	if (port->flags & ASYNC_INITIALIZED &&
+	if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
 			port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, port->closing_wait);
 	if (port->drain_delay) {
@@ -318,6 +331,9 @@
 			timeout = 2 * HZ;
 		schedule_timeout_interruptible(timeout);
 	}
+	/* Don't call port->drop for the last reference. Callers will want
+	   to drop the last active reference in ->shutdown() or the tty
+	   shutdown path */
 	return 1;
 }
 EXPORT_SYMBOL(tty_port_close_start);
@@ -348,3 +364,14 @@
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 EXPORT_SYMBOL(tty_port_close_end);
+
+void tty_port_close(struct tty_port *port, struct tty_struct *tty,
+							struct file *filp)
+{
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	tty_port_shutdown(port);
+	tty_port_close_end(port, tty);
+	tty_port_tty_set(port, NULL);
+}
+EXPORT_SYMBOL(tty_port_close);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 6aa88f5..0c80c68 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -252,7 +252,6 @@
 	struct vt_notifier_param param = { .vc = vc };
 	atomic_notifier_call_chain(&vt_notifier_list, VT_UPDATE, &param);
 }
-
 /*
  *	Low-Level Functions
  */
@@ -935,6 +934,7 @@
 
 	if (CON_IS_VISIBLE(vc))
 		update_screen(vc);
+	vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num);
 	return err;
 }
 
@@ -2129,11 +2129,7 @@
 	currcons = vc->vc_num;
 	if (!vc_cons_allocated(currcons)) {
 	    /* could this happen? */
-	    static int error = 0;
-	    if (!error) {
-		error = 1;
-		printk("con_write: tty %d not allocated\n", currcons+1);
-	    }
+		printk_once("con_write: tty %d not allocated\n", currcons+1);
 	    release_console_sem();
 	    return 0;
 	}
@@ -2910,6 +2906,9 @@
 	.flush_chars = con_flush_chars,
 	.chars_in_buffer = con_chars_in_buffer,
 	.ioctl = vt_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = vt_compat_ioctl,
+#endif
 	.stop = con_stop,
 	.start = con_start,
 	.throttle = con_throttle,
@@ -2955,7 +2954,6 @@
 }
 
 #ifndef VT_SINGLE_DRIVER
-#include <linux/device.h>
 
 static struct class *vtconsole_class;
 
@@ -3638,6 +3636,7 @@
 		blank_state = blank_vesa_wait;
 		mod_timer(&console_timer, jiffies + vesa_off_interval);
 	}
+	vt_event_post(VT_EVENT_BLANK, vc->vc_num, vc->vc_num);
 }
 EXPORT_SYMBOL(do_blank_screen);
 
@@ -3682,6 +3681,7 @@
 		console_blank_hook(0);
 	set_palette(vc);
 	set_cursor(vc);
+	vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num);
 }
 EXPORT_SYMBOL(do_unblank_screen);
 
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 95189f2..29c651a 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -16,6 +16,8 @@
 #include <linux/tty.h>
 #include <linux/timer.h>
 #include <linux/kernel.h>
+#include <linux/compat.h>
+#include <linux/module.h>
 #include <linux/kd.h>
 #include <linux/vt.h>
 #include <linux/string.h>
@@ -62,6 +64,133 @@
 static void complete_change_console(struct vc_data *vc);
 
 /*
+ *	User space VT_EVENT handlers
+ */
+
+struct vt_event_wait {
+	struct list_head list;
+	struct vt_event event;
+	int done;
+};
+
+static LIST_HEAD(vt_events);
+static DEFINE_SPINLOCK(vt_event_lock);
+static DECLARE_WAIT_QUEUE_HEAD(vt_event_waitqueue);
+
+/**
+ *	vt_event_post
+ *	@event: the event that occurred
+ *	@old: old console
+ *	@new: new console
+ *
+ *	Post an VT event to interested VT handlers
+ */
+
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new)
+{
+	struct list_head *pos, *head;
+	unsigned long flags;
+	int wake = 0;
+
+	spin_lock_irqsave(&vt_event_lock, flags);
+	head = &vt_events;
+
+	list_for_each(pos, head) {
+		struct vt_event_wait *ve = list_entry(pos,
+						struct vt_event_wait, list);
+		if (!(ve->event.event & event))
+			continue;
+		ve->event.event = event;
+		/* kernel view is consoles 0..n-1, user space view is
+		   console 1..n with 0 meaning current, so we must bias */
+		ve->event.old = old + 1;
+		ve->event.new = new + 1;
+		wake = 1;
+		ve->done = 1;
+	}
+	spin_unlock_irqrestore(&vt_event_lock, flags);
+	if (wake)
+		wake_up_interruptible(&vt_event_waitqueue);
+}
+
+/**
+ *	vt_event_wait		-	wait for an event
+ *	@vw: our event
+ *
+ *	Waits for an event to occur which completes our vt_event_wait
+ *	structure. On return the structure has wv->done set to 1 for success
+ *	or 0 if some event such as a signal ended the wait.
+ */
+
+static void vt_event_wait(struct vt_event_wait *vw)
+{
+	unsigned long flags;
+	/* Prepare the event */
+	INIT_LIST_HEAD(&vw->list);
+	vw->done = 0;
+	/* Queue our event */
+	spin_lock_irqsave(&vt_event_lock, flags);
+	list_add(&vw->list, &vt_events);
+	spin_unlock_irqrestore(&vt_event_lock, flags);
+	/* Wait for it to pass */
+	wait_event_interruptible(vt_event_waitqueue, vw->done);
+	/* Dequeue it */
+	spin_lock_irqsave(&vt_event_lock, flags);
+	list_del(&vw->list);
+	spin_unlock_irqrestore(&vt_event_lock, flags);
+}
+
+/**
+ *	vt_event_wait_ioctl	-	event ioctl handler
+ *	@arg: argument to ioctl
+ *
+ *	Implement the VT_WAITEVENT ioctl using the VT event interface
+ */
+
+static int vt_event_wait_ioctl(struct vt_event __user *event)
+{
+	struct vt_event_wait vw;
+
+	if (copy_from_user(&vw.event, event, sizeof(struct vt_event)))
+		return -EFAULT;
+	/* Highest supported event for now */
+	if (vw.event.event & ~VT_MAX_EVENT)
+		return -EINVAL;
+
+	vt_event_wait(&vw);
+	/* If it occurred report it */
+	if (vw.done) {
+		if (copy_to_user(event, &vw.event, sizeof(struct vt_event)))
+			return -EFAULT;
+		return 0;
+	}
+	return -EINTR;
+}
+
+/**
+ *	vt_waitactive	-	active console wait
+ *	@event: event code
+ *	@n: new console
+ *
+ *	Helper for event waits. Used to implement the legacy
+ *	event waiting ioctls in terms of events
+ */
+
+int vt_waitactive(int n)
+{
+	struct vt_event_wait vw;
+	do {
+		if (n == fg_console + 1)
+			break;
+		vw.event.event = VT_EVENT_SWITCH;
+		vt_event_wait(&vw);
+		if (vw.done == 0)
+			return -EINTR;
+	} while (vw.event.new != n);
+	return 0;
+}
+
+/*
  * these are the valid i/o ports we're allowed to change. they map all the
  * video ports
  */
@@ -360,6 +489,8 @@
 	return 0;
 }
 
+
+
 /*
  * We handle the console-specific ioctl's here.  We allow the
  * capability to modify any console, not just the fg_console. 
@@ -842,6 +973,41 @@
 		}
 		break;
 
+	case VT_SETACTIVATE:
+	{
+		struct vt_setactivate vsa;
+
+		if (!perm)
+			goto eperm;
+
+		if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
+						sizeof(struct vt_setactivate)))
+			return -EFAULT;
+		if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
+			ret = -ENXIO;
+		else {
+			vsa.console--;
+			acquire_console_sem();
+			ret = vc_allocate(vsa.console);
+			if (ret == 0) {
+				struct vc_data *nvc;
+				/* This is safe providing we don't drop the
+				   console sem between vc_allocate and
+				   finishing referencing nvc */
+				nvc = vc_cons[vsa.console].d;
+				nvc->vt_mode = vsa.mode;
+				nvc->vt_mode.frsig = 0;
+				put_pid(nvc->vt_pid);
+				nvc->vt_pid = get_pid(task_pid(current));
+			}
+			release_console_sem();
+			if (ret)
+				break;
+			/* Commence switch and lock */
+			set_console(arg);
+		}
+	}
+
 	/*
 	 * wait until the specified VT has been activated
 	 */
@@ -851,7 +1017,7 @@
 		if (arg == 0 || arg > MAX_NR_CONSOLES)
 			ret = -ENXIO;
 		else
-			ret = vt_waitactive(arg - 1);
+			ret = vt_waitactive(arg);
 		break;
 
 	/*
@@ -1159,6 +1325,9 @@
 		ret = put_user(vc->vc_hi_font_mask,
 					(unsigned short __user *)arg);
 		break;
+	case VT_WAITEVENT:
+		ret = vt_event_wait_ioctl((struct vt_event __user *)arg);
+		break;
 	default:
 		ret = -ENOIOCTLCMD;
 	}
@@ -1170,54 +1339,6 @@
 	goto out;
 }
 
-/*
- * Sometimes we want to wait until a particular VT has been activated. We
- * do it in a very simple manner. Everybody waits on a single queue and
- * get woken up at once. Those that are satisfied go on with their business,
- * while those not ready go back to sleep. Seems overkill to add a wait
- * to each vt just for this - usually this does nothing!
- */
-static DECLARE_WAIT_QUEUE_HEAD(vt_activate_queue);
-
-/*
- * Sleeps until a vt is activated, or the task is interrupted. Returns
- * 0 if activation, -EINTR if interrupted by a signal handler.
- */
-int vt_waitactive(int vt)
-{
-	int retval;
-	DECLARE_WAITQUEUE(wait, current);
-
-	add_wait_queue(&vt_activate_queue, &wait);
-	for (;;) {
-		retval = 0;
-
-		/*
-		 * Synchronize with redraw_screen(). By acquiring the console
-		 * semaphore we make sure that the console switch is completed
-		 * before we return. If we didn't wait for the semaphore, we
-		 * could return at a point where fg_console has already been
-		 * updated, but the console switch hasn't been completed.
-		 */
-		acquire_console_sem();
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (vt == fg_console) {
-			release_console_sem();
-			break;
-		}
-		release_console_sem();
-		retval = -ERESTARTNOHAND;
-		if (signal_pending(current))
-			break;
-		schedule();
-	}
-	remove_wait_queue(&vt_activate_queue, &wait);
-	__set_current_state(TASK_RUNNING);
-	return retval;
-}
-
-#define vt_wake_waitactive() wake_up(&vt_activate_queue)
-
 void reset_vc(struct vc_data *vc)
 {
 	vc->vc_mode = KD_TEXT;
@@ -1256,12 +1377,216 @@
 	release_console_sem();
 }
 
+#ifdef CONFIG_COMPAT
+
+struct compat_consolefontdesc {
+	unsigned short charcount;       /* characters in font (256 or 512) */
+	unsigned short charheight;      /* scan lines per character (1-32) */
+	compat_caddr_t chardata;	/* font data in expanded form */
+};
+
+static inline int
+compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd,
+			 int perm, struct console_font_op *op)
+{
+	struct compat_consolefontdesc cfdarg;
+	int i;
+
+	if (copy_from_user(&cfdarg, user_cfd, sizeof(struct compat_consolefontdesc)))
+		return -EFAULT;
+
+	switch (cmd) {
+	case PIO_FONTX:
+		if (!perm)
+			return -EPERM;
+		op->op = KD_FONT_OP_SET;
+		op->flags = KD_FONT_FLAG_OLD;
+		op->width = 8;
+		op->height = cfdarg.charheight;
+		op->charcount = cfdarg.charcount;
+		op->data = compat_ptr(cfdarg.chardata);
+		return con_font_op(vc_cons[fg_console].d, op);
+	case GIO_FONTX:
+		op->op = KD_FONT_OP_GET;
+		op->flags = KD_FONT_FLAG_OLD;
+		op->width = 8;
+		op->height = cfdarg.charheight;
+		op->charcount = cfdarg.charcount;
+		op->data = compat_ptr(cfdarg.chardata);
+		i = con_font_op(vc_cons[fg_console].d, op);
+		if (i)
+			return i;
+		cfdarg.charheight = op->height;
+		cfdarg.charcount = op->charcount;
+		if (copy_to_user(user_cfd, &cfdarg, sizeof(struct compat_consolefontdesc)))
+			return -EFAULT;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+struct compat_console_font_op {
+	compat_uint_t op;        /* operation code KD_FONT_OP_* */
+	compat_uint_t flags;     /* KD_FONT_FLAG_* */
+	compat_uint_t width, height;     /* font size */
+	compat_uint_t charcount;
+	compat_caddr_t data;    /* font data with height fixed to 32 */
+};
+
+static inline int
+compat_kdfontop_ioctl(struct compat_console_font_op __user *fontop,
+			 int perm, struct console_font_op *op, struct vc_data *vc)
+{
+	int i;
+
+	if (copy_from_user(op, fontop, sizeof(struct compat_console_font_op)))
+		return -EFAULT;
+	if (!perm && op->op != KD_FONT_OP_GET)
+		return -EPERM;
+	op->data = compat_ptr(((struct compat_console_font_op *)op)->data);
+	op->flags |= KD_FONT_FLAG_OLD;
+	i = con_font_op(vc, op);
+	if (i)
+		return i;
+	((struct compat_console_font_op *)op)->data = (unsigned long)op->data;
+	if (copy_to_user(fontop, op, sizeof(struct compat_console_font_op)))
+		return -EFAULT;
+	return 0;
+}
+
+struct compat_unimapdesc {
+	unsigned short entry_ct;
+	compat_caddr_t entries;
+};
+
+static inline int
+compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
+			 int perm, struct vc_data *vc)
+{
+	struct compat_unimapdesc tmp;
+	struct unipair __user *tmp_entries;
+
+	if (copy_from_user(&tmp, user_ud, sizeof tmp))
+		return -EFAULT;
+	tmp_entries = compat_ptr(tmp.entries);
+	if (tmp_entries)
+		if (!access_ok(VERIFY_WRITE, tmp_entries,
+				tmp.entry_ct*sizeof(struct unipair)))
+			return -EFAULT;
+	switch (cmd) {
+	case PIO_UNIMAP:
+		if (!perm)
+			return -EPERM;
+		return con_set_unimap(vc, tmp.entry_ct, tmp_entries);
+	case GIO_UNIMAP:
+		if (!perm && fg_console != vc->vc_num)
+			return -EPERM;
+		return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp_entries);
+	}
+	return 0;
+}
+
+long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+	     unsigned int cmd, unsigned long arg)
+{
+	struct vc_data *vc = tty->driver_data;
+	struct console_font_op op;	/* used in multiple places here */
+	struct kbd_struct *kbd;
+	unsigned int console;
+	void __user *up = (void __user *)arg;
+	int perm;
+	int ret = 0;
+
+	console = vc->vc_num;
+
+	lock_kernel();
+
+	if (!vc_cons_allocated(console)) { 	/* impossible? */
+		ret = -ENOIOCTLCMD;
+		goto out;
+	}
+
+	/*
+	 * To have permissions to do most of the vt ioctls, we either have
+	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
+	 */
+	perm = 0;
+	if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
+		perm = 1;
+
+	kbd = kbd_table + console;
+	switch (cmd) {
+	/*
+	 * these need special handlers for incompatible data structures
+	 */
+	case PIO_FONTX:
+	case GIO_FONTX:
+		ret = compat_fontx_ioctl(cmd, up, perm, &op);
+		break;
+
+	case KDFONTOP:
+		ret = compat_kdfontop_ioctl(up, perm, &op, vc);
+		break;
+
+	case PIO_UNIMAP:
+	case GIO_UNIMAP:
+		ret = do_unimap_ioctl(cmd, up, perm, vc);
+		break;
+
+	/*
+	 * all these treat 'arg' as an integer
+	 */
+	case KIOCSOUND:
+	case KDMKTONE:
+#ifdef CONFIG_X86
+	case KDADDIO:
+	case KDDELIO:
+#endif
+	case KDSETMODE:
+	case KDMAPDISP:
+	case KDUNMAPDISP:
+	case KDSKBMODE:
+	case KDSKBMETA:
+	case KDSKBLED:
+	case KDSETLED:
+	case KDSIGACCEPT:
+	case VT_ACTIVATE:
+	case VT_WAITACTIVE:
+	case VT_RELDISP:
+	case VT_DISALLOCATE:
+	case VT_RESIZE:
+	case VT_RESIZEX:
+		goto fallback;
+
+	/*
+	 * the rest has a compatible data structure behind arg,
+	 * but we have to convert it to a proper 64 bit pointer.
+	 */
+	default:
+		arg = (unsigned long)compat_ptr(arg);
+		goto fallback;
+	}
+out:
+	unlock_kernel();
+	return ret;
+
+fallback:
+	unlock_kernel();
+	return vt_ioctl(tty, file, cmd, arg);
+}
+
+
+#endif /* CONFIG_COMPAT */
+
+
 /*
- * Performs the back end of a vt switch
+ * Performs the back end of a vt switch. Called under the console
+ * semaphore.
  */
 static void complete_change_console(struct vc_data *vc)
 {
 	unsigned char old_vc_mode;
+	int old = fg_console;
 
 	last_console = fg_console;
 
@@ -1325,7 +1650,7 @@
 	/*
 	 * Wake anyone waiting for their VT to activate
 	 */
-	vt_wake_waitactive();
+	vt_event_post(VT_EVENT_SWITCH, old, vc->vc_num);
 	return;
 }
 
@@ -1398,3 +1723,58 @@
 
 	complete_change_console(new_vc);
 }
+
+/* Perform a kernel triggered VT switch for suspend/resume */
+
+static int disable_vt_switch;
+
+int vt_move_to_console(unsigned int vt, int alloc)
+{
+	int prev;
+
+	acquire_console_sem();
+	/* Graphics mode - up to X */
+	if (disable_vt_switch) {
+		release_console_sem();
+		return 0;
+	}
+	prev = fg_console;
+
+	if (alloc && vc_allocate(vt)) {
+		/* we can't have a free VC for now. Too bad,
+		 * we don't want to mess the screen for now. */
+		release_console_sem();
+		return -ENOSPC;
+	}
+
+	if (set_console(vt)) {
+		/*
+		 * We're unable to switch to the SUSPEND_CONSOLE.
+		 * Let the calling function know so it can decide
+		 * what to do.
+		 */
+		release_console_sem();
+		return -EIO;
+	}
+	release_console_sem();
+	if (vt_waitactive(vt + 1)) {
+		pr_debug("Suspend: Can't switch VCs.");
+		return -EINTR;
+	}
+	return prev;
+}
+
+/*
+ * Normally during a suspend, we allocate a new console and switch to it.
+ * When we resume, we switch back to the original console.  This switch
+ * can be slow, so on systems where the framebuffer can handle restoration
+ * of video registers anyways, there's little point in doing the console
+ * switch.  This function allows you to disable it by passing it '0'.
+ */
+void pm_set_vt_switch(int do_switch)
+{
+	acquire_console_sem();
+	disable_vt_switch = !do_switch;
+	release_console_sem();
+}
+EXPORT_SYMBOL(pm_set_vt_switch);
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 8504a21..ad41f19 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -17,6 +17,7 @@
 #include <linux/cpuidle.h>
 #include <linux/ktime.h>
 #include <linux/hrtimer.h>
+#include <trace/events/power.h>
 
 #include "cpuidle.h"
 
@@ -91,6 +92,7 @@
 	/* give the governor an opportunity to reflect on the outcome */
 	if (cpuidle_curr_governor->reflect)
 		cpuidle_curr_governor->reflect(dev);
+	trace_power_end(0);
 }
 
 /**
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 8ff7e35..f33ac27 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,33 +408,28 @@
 	return retval;
 }
 
-/* FIXME: This function does not have error returns */
-
 static int if_chars_in_buffer(struct tty_struct *tty)
 {
 	struct cardstate *cs;
-	int retval = -ENODEV;
+	int retval = 0;
 
 	cs = (struct cardstate *) tty->driver_data;
 	if (!cs) {
 		pr_err("%s: no cardstate\n", __func__);
-		return -ENODEV;
+		return 0;
 	}
 
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+	mutex_lock(&cs->mutex);
 
-	if (!cs->connected) {
+	if (!cs->connected)
 		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-	} else if (!cs->open_count)
+	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else if (cs->mstate != MS_LOCKED) {
+	else if (cs->mstate != MS_LOCKED)
 		dev_warn(cs->dev, "can't write to unlocked device\n");
-		retval = -EBUSY;
-	} else
+	else
 		retval = cs->ops->chars_in_buffer(cs);
 
 	mutex_unlock(&cs->mutex);
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 26f6ee9..e17c535 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -616,6 +616,14 @@
 	sl_free_bufs(sl);
 }
 
+/* Hook the destructor so we can free slip devices at the right point in time */
+static void sl_free_netdev(struct net_device *dev)
+{
+	int i = dev->base_addr;
+	free_netdev(dev);
+	slip_devs[i] = NULL;
+}
+
 static const struct net_device_ops sl_netdev_ops = {
 	.ndo_init		= sl_init,
 	.ndo_uninit	  	= sl_uninit,
@@ -634,7 +642,7 @@
 static void sl_setup(struct net_device *dev)
 {
 	dev->netdev_ops		= &sl_netdev_ops;
-	dev->destructor		= free_netdev;
+	dev->destructor		= sl_free_netdev;
 
 	dev->hard_header_len	= 0;
 	dev->addr_len		= 0;
@@ -712,8 +720,6 @@
 static struct slip *sl_alloc(dev_t line)
 {
 	int i;
-	int sel = -1;
-	int score = -1;
 	struct net_device *dev = NULL;
 	struct slip       *sl;
 
@@ -724,55 +730,7 @@
 		dev = slip_devs[i];
 		if (dev == NULL)
 			break;
-
-		sl = netdev_priv(dev);
-		if (sl->leased) {
-			if (sl->line != line)
-				continue;
-			if (sl->tty)
-				return NULL;
-
-			/* Clear ESCAPE & ERROR flags */
-			sl->flags &= (1 << SLF_INUSE);
-			return sl;
-		}
-
-		if (sl->tty)
-			continue;
-
-		if (current->pid == sl->pid) {
-			if (sl->line == line && score < 3) {
-				sel = i;
-				score = 3;
-				continue;
-			}
-			if (score < 2) {
-				sel = i;
-				score = 2;
-			}
-			continue;
-		}
-		if (sl->line == line && score < 1) {
-			sel = i;
-			score = 1;
-			continue;
-		}
-		if (score < 0) {
-			sel = i;
-			score = 0;
-		}
 	}
-
-	if (sel >= 0) {
-		i = sel;
-		dev = slip_devs[i];
-		if (score > 1) {
-			sl = netdev_priv(dev);
-			sl->flags &= (1 << SLF_INUSE);
-			return sl;
-		}
-	}
-
 	/* Sorry, too many, all slots in use */
 	if (i >= slip_maxdev)
 		return NULL;
@@ -909,30 +867,13 @@
 }
 
 /*
-
-  FIXME: 1,2 are fixed 3 was never true anyway.
-
-   Let me to blame a bit.
-   1. TTY module calls this funstion on soft interrupt.
-   2. TTY module calls this function WITH MASKED INTERRUPTS!
-   3. TTY module does not notify us about line discipline
-      shutdown,
-
-   Seems, now it is clean. The solution is to consider netdevice and
-   line discipline sides as two independent threads.
-
-   By-product (not desired): sl? does not feel hangups and remains open.
-   It is supposed, that user level program (dip, diald, slattach...)
-   will catch SIGHUP and make the rest of work.
-
-   I see no way to make more with current tty code. --ANK
- */
-
-/*
  * Close down a SLIP channel.
  * This means flushing out any pending queues, and then returning. This
  * call is serialized against other ldisc functions.
+ *
+ * We also use this method fo a hangup event
  */
+
 static void slip_close(struct tty_struct *tty)
 {
 	struct slip *sl = tty->disc_data;
@@ -951,10 +892,16 @@
 	del_timer_sync(&sl->keepalive_timer);
 	del_timer_sync(&sl->outfill_timer);
 #endif
-
-	/* Count references from TTY module */
+	/* Flush network side */
+	unregister_netdev(sl->dev);
+	/* This will complete via sl_free_netdev */
 }
 
+static int slip_hangup(struct tty_struct *tty)
+{
+	slip_close(tty);
+	return 0;
+}
  /************************************************************************
   *			STANDARD SLIP ENCAPSULATION		  	 *
   ************************************************************************/
@@ -1311,6 +1258,7 @@
 	.name 		= "slip",
 	.open 		= slip_open,
 	.close	 	= slip_close,
+	.hangup	 	= slip_hangup,
 	.ioctl		= slip_ioctl,
 	.receive_buf	= slip_receive_buf,
 	.write_wakeup	= slip_write_wakeup,
@@ -1384,6 +1332,8 @@
 		}
 	} while (busy && time_before(jiffies, timeout));
 
+	/* FIXME: hangup is async so we should wait when doing this second
+	   phase */
 
 	for (i = 0; i < slip_maxdev; i++) {
 		dev = slip_devs[i];
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index cb6d85d..1e3d193 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -86,7 +86,7 @@
 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flag, rxs, max_count = 256;
 
 	status = *CSR_UARTFLG;
@@ -124,7 +124,7 @@
 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -235,8 +235,8 @@
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
 
-	if (port->info && port->info->port.tty) {
-		struct tty_struct *tty = port->info->port.tty;
+	if (port->state && port->state->port.tty) {
+		struct tty_struct *tty = port->state->port.tty;
 		unsigned int b = port->uartclk / (16 * quot);
 		tty_encode_baud_rate(tty, b, b);
 	}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index fb867a9..2209620 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1382,7 +1382,7 @@
 static void
 receive_chars(struct uart_8250_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, lsr = *status;
 	int max_count = 256;
 	char flag;
@@ -1457,7 +1457,7 @@
 
 static void transmit_chars(struct uart_8250_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -1500,7 +1500,7 @@
 	status |= up->msr_saved_flags;
 	up->msr_saved_flags = 0;
 	if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
-	    up->port.info != NULL) {
+	    up->port.state != NULL) {
 		if (status & UART_MSR_TERI)
 			up->port.icount.rng++;
 		if (status & UART_MSR_DDSR)
@@ -1510,7 +1510,7 @@
 		if (status & UART_MSR_DCTS)
 			uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	return status;
@@ -1677,7 +1677,7 @@
 		INIT_LIST_HEAD(&up->list);
 		i->head = &up->list;
 		spin_unlock_irq(&i->lock);
-
+		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
 		if (ret < 0)
@@ -1764,7 +1764,7 @@
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
-	    (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
+	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
 	    (lsr & UART_LSR_THRE)) {
 		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
 		iir |= UART_IIR_THRI;
@@ -2026,7 +2026,7 @@
 		 * allow register changes to become visible.
 		 */
 		spin_lock_irqsave(&up->port.lock, flags);
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			disable_irq_nosync(up->port.irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
@@ -2039,7 +2039,7 @@
 		iir = serial_in(up, UART_IIR);
 		serial_out(up, UART_IER, 0);
 
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			enable_irq(up->port.irq);
 		spin_unlock_irqrestore(&up->port.lock, flags);
 
@@ -2272,7 +2272,9 @@
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16);
 	quot = serial8250_get_divisor(port, baud);
 
 	/*
@@ -2671,6 +2673,7 @@
 	     i++, up++) {
 		up->port.iobase   = old_serial_port[i].port;
 		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
+		up->port.irqflags = old_serial_port[i].irqflags;
 		up->port.uartclk  = old_serial_port[i].baud_base * 16;
 		up->port.flags    = old_serial_port[i].flags;
 		up->port.hub6     = old_serial_port[i].hub6;
@@ -2679,7 +2682,7 @@
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
 		if (share_irqs)
-			up->port.flags |= UPF_SHARE_IRQ;
+			up->port.irqflags |= IRQF_SHARED;
 	}
 }
 
@@ -2869,6 +2872,7 @@
 	p->iobase       = port->iobase;
 	p->membase      = port->membase;
 	p->irq          = port->irq;
+	p->irqflags     = port->irqflags;
 	p->uartclk      = port->uartclk;
 	p->fifosize     = port->fifosize;
 	p->regshift     = port->regshift;
@@ -2942,6 +2946,7 @@
 		port.iobase		= p->iobase;
 		port.membase		= p->membase;
 		port.irq		= p->irq;
+		port.irqflags		= p->irqflags;
 		port.uartclk		= p->uartclk;
 		port.regshift		= p->regshift;
 		port.iotype		= p->iotype;
@@ -2954,7 +2959,7 @@
 		port.serial_out		= p->serial_out;
 		port.dev		= &dev->dev;
 		if (share_irqs)
-			port.flags |= UPF_SHARE_IRQ;
+			port.irqflags |= IRQF_SHARED;
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
@@ -3096,6 +3101,7 @@
 		uart->port.iobase       = port->iobase;
 		uart->port.membase      = port->membase;
 		uart->port.irq          = port->irq;
+		uart->port.irqflags     = port->irqflags;
 		uart->port.uartclk      = port->uartclk;
 		uart->port.fifosize     = port->fifosize;
 		uart->port.regshift     = port->regshift;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 5202603..6e19ea3 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -25,6 +25,7 @@
 	unsigned char io_type;
 	unsigned char *iomem_base;
 	unsigned short iomem_reg_shift;
+	unsigned long irqflags;
 };
 
 /*
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 58a4879..429a8ae 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -117,7 +117,7 @@
 
 static void pl010_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, rsr, max_count = 256;
 
 	status = readb(uap->port.membase + UART01x_FR);
@@ -172,7 +172,7 @@
 
 static void pl010_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -225,7 +225,7 @@
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl010_int(int irq, void *dev_id)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 72ba0c6..ef7adc8 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -124,7 +124,7 @@
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, max_count = 256;
 
 	status = readw(uap->port.membase + UART01x_FR);
@@ -175,7 +175,7 @@
 
 static void pl011_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -226,7 +226,7 @@
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 607d43a..3551c5c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -427,7 +427,7 @@
  */
 static void atmel_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -560,7 +560,7 @@
 static void atmel_tx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 	int count;
 
@@ -663,14 +663,14 @@
 	 * uart_start(), which takes the lock.
 	 */
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct atmel_dma_buffer *pdc;
 	int rx_idx = atmel_port->pdc_rx_idx;
 	unsigned int head;
@@ -776,7 +776,7 @@
 		if (status_change & ATMEL_US_CTS)
 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
 
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 		atmel_port->irq_status_prev = status;
 	}
@@ -795,7 +795,7 @@
 static int atmel_startup(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int retval;
 
 	/*
@@ -854,7 +854,7 @@
 	}
 	if (atmel_use_dma_tx(port)) {
 		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		pdc->buf = xmit->buf;
 		pdc->dma_addr = dma_map_single(port->dev,
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index b4a7650..50abb7e 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,10 @@
 # undef CONFIG_EARLY_PRINTK
 #endif
 
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
 /* UART name and device definitions */
 #define BFIN_SERIAL_NAME	"ttyBF"
 #define BFIN_SERIAL_MAJOR	204
@@ -140,7 +144,7 @@
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 #endif
 
 	while (!(UART_GET_LSR(uart) & TEMT))
@@ -167,7 +171,7 @@
 static void bfin_serial_start_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
@@ -239,10 +243,10 @@
 			return;
 		}
 
-	if (!uart->port.info || !uart->port.info->port.tty)
+	if (!uart->port.state || !uart->port.state->port.tty)
 		return;
 #endif
-	tty = uart->port.info->port.tty;
+	tty = uart->port.state->port.tty;
 
 	if (ANOMALY_05000363) {
 		/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -327,7 +331,7 @@
 
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 #ifdef CONFIG_BF54x
@@ -394,7 +398,7 @@
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	uart->tx_done = 0;
 
@@ -432,7 +436,7 @@
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 {
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 	int i, flg, status;
 
 	status = UART_GET_LSR(uart);
@@ -525,7 +529,7 @@
 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
@@ -961,10 +965,10 @@
 	int line = port->line;
 	unsigned short val;
 
-	if (line >= port->info->port.tty->driver->num)
+	if (line >= port->state->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->termios->c_line) {
+	switch (port->state->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index c108b1a..088bb35 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -178,7 +178,7 @@
 static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch;
 
 	do {
@@ -205,7 +205,7 @@
 static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int stat = SPORT_GET_STAT(up);
 
 	/* Overflow in RX FIFO */
@@ -290,7 +290,7 @@
 
 static void sport_uart_tx_chars(struct sport_uart_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (SPORT_GET_STAT(up) & TXF)
 		return;
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 80e7642..b6acd19 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -93,7 +93,7 @@
 static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = clps_readl(SYSFLG(port));
@@ -147,7 +147,7 @@
 static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count;
 
 	if (port->x_char) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f8df068..8d349b23 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -244,7 +244,7 @@
 	int i;
 	unsigned char ch;
 	u8 *cp;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	cbd_t __iomem *bdp;
 	u16 status;
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index 6042b87..57421d7 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -197,7 +197,7 @@
 	while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
 		dport = &mux->dport[LINE(status)];
 		uport = &dport->port;
-		tty = uport->info->port.tty;	/* point to the proper dev */
+		tty = uport->state->port.tty;	/* point to the proper dev */
 
 		ch = UCHAR(status);		/* grab the char */
 		flag = TTY_NORMAL;
@@ -249,7 +249,7 @@
 	}
 	for (i = 0; i < DZ_NB_PORT; i++)
 		if (lines_rx[i])
-			tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
+			tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
 }
 
 /*
@@ -268,7 +268,7 @@
 
 	status = dz_in(dport, DZ_CSR);
 	dport = &mux->dport[LINE(status)];
-	xmit = &dport->port.info->xmit;
+	xmit = &dport->port.state->xmit;
 
 	if (dport->port.x_char) {		/* XON/XOFF chars */
 		dz_out(dport, DZ_TDR, dport->port.x_char);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index cd1b6a4..2d7feec 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -617,7 +617,7 @@
 	 * disable break condition
 	 */
 	cmdReg = readb(&icom_port->dram->CmdReg);
-	if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) {
+	if (cmdReg & CMD_SND_BREAK) {
 		writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
 	}
 }
@@ -627,7 +627,7 @@
 	unsigned long data_count;
 	unsigned char cmdReg;
 	unsigned long offset;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 
 	trace(ICOM_PORT, "WRITE", 0);
 
@@ -638,11 +638,11 @@
 	}
 
 	data_count = 0;
-	while ((port->info->xmit.head != temp_tail) &&
+	while ((port->state->xmit.head != temp_tail) &&
 	       (data_count <= XMIT_BUFF_SZ)) {
 
 		ICOM_PORT->xmit_buf[data_count++] =
-		    port->info->xmit.buf[temp_tail];
+		    port->state->xmit.buf[temp_tail];
 
 		temp_tail++;
 		temp_tail &= (UART_XMIT_SIZE - 1);
@@ -694,8 +694,8 @@
 			uart_handle_cts_change(&icom_port->uart_port,
 					       delta_status & ICOM_CTS);
 
-		wake_up_interruptible(&icom_port->uart_port.info->
-				      delta_msr_wait);
+		wake_up_interruptible(&icom_port->uart_port.state->
+				      port.delta_msr_wait);
 		old_status = status;
 	}
 	spin_unlock(&icom_port->uart_port.lock);
@@ -718,10 +718,10 @@
 		icom_port->uart_port.icount.tx += count;
 
 		for (i=0; i<count &&
-			!uart_circ_empty(&icom_port->uart_port.info->xmit); i++) {
+			!uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
 
-			icom_port->uart_port.info->xmit.tail++;
-			icom_port->uart_port.info->xmit.tail &=
+			icom_port->uart_port.state->xmit.tail++;
+			icom_port->uart_port.state->xmit.tail &=
 				(UART_XMIT_SIZE - 1);
 		}
 
@@ -735,7 +735,7 @@
 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 {
 	short int count, rcv_buff;
-	struct tty_struct *tty = icom_port->uart_port.info->port.tty;
+	struct tty_struct *tty = icom_port->uart_port.state->port.tty;
 	unsigned short int status;
 	struct uart_icount *icount;
 	unsigned long offset;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7485afd..18130f1 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -224,7 +224,7 @@
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -236,7 +236,7 @@
 	struct imx_port *sport = (struct imx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		imx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -323,7 +323,7 @@
 
 static inline void imx_transmit_buffer(struct imx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
 		/* send xmit->buf[xmit->tail]
@@ -388,7 +388,7 @@
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
 	uart_handle_cts_change(&sport->port, !!val);
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 	return IRQ_HANDLED;
@@ -397,7 +397,7 @@
 static irqreturn_t imx_txint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -427,7 +427,7 @@
 {
 	struct imx_port *sport = dev_id;
 	unsigned int rx,flg,ignored = 0;
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned long flags, temp;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -900,11 +900,11 @@
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	if (port->info && port->info->port.tty) {
+	if (port->state && port->state->port.tty) {
 		tdiv64 = sport->port.uartclk;
 		tdiv64 *= num;
 		do_div(tdiv64, denom * 16 * div);
-		tty_encode_baud_rate(sport->port.info->port.tty,
+		tty_encode_baud_rate(sport->port.state->port.tty,
 				(speed_t)tdiv64, (speed_t)tdiv64);
 	}
 
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index ae3699d..d8983dd 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -897,25 +897,25 @@
 	char *start;
 	struct tty_struct *tty;
 	struct ioc3_port *port = get_ioc3_port(the_port);
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return;
 	if (!port)
 		return;
 
-	info = the_port->info;
-	tty = info->port.tty;
+	state = the_port->state;
+	tty = state->port.tty;
 
-	if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+	if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
 		/* Nothing to do or hw stopped */
 		set_notification(port, N_ALL_OUTPUT, 0);
 		return;
 	}
 
-	head = info->xmit.head;
-	tail = info->xmit.tail;
-	start = (char *)&info->xmit.buf[tail];
+	head = state->xmit.head;
+	tail = state->xmit.tail;
+	start = (char *)&state->xmit.buf[tail];
 
 	/* write out all the data or until the end of the buffer */
 	xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -928,14 +928,14 @@
 			/* advance the pointers */
 			tail += result;
 			tail &= UART_XMIT_SIZE - 1;
-			info->xmit.tail = tail;
-			start = (char *)&info->xmit.buf[tail];
+			state->xmit.tail = tail;
+			start = (char *)&state->xmit.buf[tail];
 		}
 	}
-	if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(the_port);
 
-	if (uart_circ_empty(&info->xmit)) {
+	if (uart_circ_empty(&state->xmit)) {
 		set_notification(port, N_OUTPUT_LOWAT, 0);
 	} else {
 		set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -956,7 +956,7 @@
 	unsigned int cflag;
 	int baud;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
 
@@ -997,14 +997,14 @@
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	info->port.tty->low_latency = 1;
+	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(info->port.tty))
+	if (I_IGNPAR(state->port.tty))
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						  | N_FRAMING_ERROR);
-	if (I_IGNBRK(info->port.tty)) {
+	if (I_IGNBRK(state->port.tty)) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(info->port.tty))
+		if (I_IGNPAR(state->port.tty))
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {
@@ -1286,8 +1286,8 @@
 						uart_handle_dcd_change
 							(port->ip_port, 0);
 						wake_up_interruptible
-						    (&the_port->info->
-						     delta_msr_wait);
+						    (&the_port->state->
+						     port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -1392,21 +1392,21 @@
 	struct tty_struct *tty;
 	unsigned char ch[MAX_CHARS];
 	int read_count = 0, read_room, flip = 0;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 	struct ioc3_port *port = get_ioc3_port(the_port);
 	unsigned long pflags;
 
 	/* Make sure all the pointers are "good" ones */
-	if (!info)
+	if (!state)
 		return 0;
-	if (!info->port.tty)
+	if (!state->port.tty)
 		return 0;
 
 	if (!(port->ip_flags & INPUT_ENABLE))
 		return 0;
 
 	spin_lock_irqsave(&the_port->lock, pflags);
-	tty = info->port.tty;
+	tty = state->port.tty;
 
 	read_count = do_read(the_port, ch, MAX_CHARS);
 	if (read_count > 0) {
@@ -1491,7 +1491,7 @@
 				uart_handle_dcd_change(the_port,
 						shadow & SHADOW_DCD);
 				wake_up_interruptible
-				    (&the_port->info->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 				   && !(shadow & SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1511,7 +1511,7 @@
 				uart_handle_cts_change(the_port, shadow
 						& SHADOW_CTS);
 				wake_up_interruptible
-				    (&the_port->info->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -1721,14 +1721,14 @@
 {
 	unsigned long port_flags;
 	struct ioc3_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	port = get_ioc3_port(the_port);
 	if (!port)
 		return;
 
-	info = the_port->info;
-	wake_up_interruptible(&info->delta_msr_wait);
+	state = the_port->state;
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
 	spin_lock_irqsave(&the_port->lock, port_flags);
 	set_notification(port, N_ALL, 0);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index e5c58fe..2e02c30 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1627,25 +1627,25 @@
 	char *start;
 	struct tty_struct *tty;
 	struct ioc4_port *port = get_ioc4_port(the_port, 0);
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return;
 	if (!port)
 		return;
 
-	info = the_port->info;
-	tty = info->port.tty;
+	state = the_port->state;
+	tty = state->port.tty;
 
-	if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+	if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
 		/* Nothing to do or hw stopped */
 		set_notification(port, N_ALL_OUTPUT, 0);
 		return;
 	}
 
-	head = info->xmit.head;
-	tail = info->xmit.tail;
-	start = (char *)&info->xmit.buf[tail];
+	head = state->xmit.head;
+	tail = state->xmit.tail;
+	start = (char *)&state->xmit.buf[tail];
 
 	/* write out all the data or until the end of the buffer */
 	xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -1658,14 +1658,14 @@
 			/* advance the pointers */
 			tail += result;
 			tail &= UART_XMIT_SIZE - 1;
-			info->xmit.tail = tail;
-			start = (char *)&info->xmit.buf[tail];
+			state->xmit.tail = tail;
+			start = (char *)&state->xmit.buf[tail];
 		}
 	}
-	if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(the_port);
 
-	if (uart_circ_empty(&info->xmit)) {
+	if (uart_circ_empty(&state->xmit)) {
 		set_notification(port, N_OUTPUT_LOWAT, 0);
 	} else {
 		set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -1686,7 +1686,7 @@
 	int baud, bits;
 	unsigned cflag;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
 
@@ -1738,14 +1738,14 @@
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	info->port.tty->low_latency = 1;
+	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(info->port.tty))
+	if (I_IGNPAR(state->port.tty))
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						| N_FRAMING_ERROR);
-	if (I_IGNBRK(info->port.tty)) {
+	if (I_IGNBRK(state->port.tty)) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(info->port.tty))
+		if (I_IGNPAR(state->port.tty))
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {
@@ -1784,7 +1784,7 @@
 static inline int ic4_startup_local(struct uart_port *the_port)
 {
 	struct ioc4_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return -1;
@@ -1793,7 +1793,7 @@
 	if (!port)
 		return -1;
 
-	info = the_port->info;
+	state = the_port->state;
 
 	local_open(port);
 
@@ -1801,7 +1801,7 @@
 	ioc4_set_proto(port, the_port->mapbase);
 
 	/* set the speed of the serial port */
-	ioc4_change_speed(the_port, info->port.tty->termios,
+	ioc4_change_speed(the_port, state->port.tty->termios,
 			  (struct ktermios *)0);
 
 	return 0;
@@ -1882,7 +1882,7 @@
 				the_port = port->ip_port;
 				the_port->icount.dcd = 1;
 				wake_up_interruptible
-					    (&the_port-> info->delta_msr_wait);
+					    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 					&& !(shadow & IOC4_SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1904,7 +1904,7 @@
 				the_port->icount.cts =
 					(shadow & IOC4_SHADOW_CTS) ? 1 : 0;
 				wake_up_interruptible
-					(&the_port->info->delta_msr_wait);
+					(&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -2236,8 +2236,8 @@
 						   && port->ip_port) {
 						the_port->icount.dcd = 0;
 						wake_up_interruptible
-						    (&the_port->info->
-							delta_msr_wait);
+						    (&the_port->state->
+							port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -2341,17 +2341,17 @@
 	unsigned char ch[IOC4_MAX_CHARS];
 	int read_count, request_count = IOC4_MAX_CHARS;
 	struct uart_icount *icount;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 	unsigned long pflags;
 
 	/* Make sure all the pointers are "good" ones */
-	if (!info)
+	if (!state)
 		return;
-	if (!info->port.tty)
+	if (!state->port.tty)
 		return;
 
 	spin_lock_irqsave(&the_port->lock, pflags);
-	tty = info->port.tty;
+	tty = state->port.tty;
 
 	request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
 
@@ -2430,19 +2430,19 @@
 {
 	unsigned long port_flags;
 	struct ioc4_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	port = get_ioc4_port(the_port, 0);
 	if (!port)
 		return;
 
-	info = the_port->info;
+	state = the_port->state;
 	port->ip_port = NULL;
 
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (state->port.tty)
+		set_bit(TTY_IO_ERROR, &state->port.tty->flags);
 
 	spin_lock_irqsave(&the_port->lock, port_flags);
 	set_notification(port, N_ALL, 0);
@@ -2538,7 +2538,7 @@
 	int retval;
 	struct ioc4_port *port;
 	struct ioc4_control *control;
-	struct uart_info *info;
+	struct uart_state *state;
 	unsigned long port_flags;
 
 	if (!the_port)
@@ -2546,7 +2546,7 @@
 	port = get_ioc4_port(the_port, 1);
 	if (!port)
 		return -ENODEV;
-	info = the_port->info;
+	state = the_port->state;
 
 	control = port->ip_control;
 	if (!control) {
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 0d9acbd..ebff4a1 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -256,9 +256,9 @@
 	unsigned int r1;
 
 	tty = NULL;
-	if (up->port.info != NULL &&
-	    up->port.info->port.tty != NULL)
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&
+	    up->port.state->port.tty != NULL)
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 		ch = readb(&channel->control);
@@ -354,7 +354,7 @@
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -404,9 +404,9 @@
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 	if (uart_tx_stopped(&up->port))
@@ -607,7 +607,7 @@
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 9dadaa11..b4b124e 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -989,7 +989,7 @@
 			{     50, B50     },
 		};
 
-		cflag = C_BAUD(ch->uart_port.info->port.tty);
+		cflag = C_BAUD(ch->uart_port.state->port.tty);
 		baud = 9600;
 		for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
 			if (baud_rates[i].cflag == cflag) {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 00f4577..7439c03 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -147,7 +147,7 @@
 	struct ktermios *termios;
 
 	spin_lock_irqsave(&port->lock, lock_flags);
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	if (ch == termios->c_cc[VSTART])
 		channel->ch_bd->bd_ops->send_start_character(channel);
 
@@ -245,7 +245,7 @@
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
 	channel->ch_c_oflag	= termios->c_oflag;
@@ -278,7 +278,7 @@
 	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
 
 	bd = channel->ch_bd;
-	ts = port->info->port.tty->termios;
+	ts = port->state->port.tty->termios;
 
 	channel->ch_flags &= ~(CH_STOPI);
 
@@ -530,7 +530,7 @@
 	if (!ch)
 		return;
 
-	tp = ch->uart_port.info->port.tty;
+	tp = ch->uart_port.state->port.tty;
 
 	bd = ch->ch_bd;
 	if(!bd)
@@ -849,7 +849,7 @@
 	u16 tail;
 	u16 tmask;
 	u32 remain;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
 	tmask = WQUEUEMASK;
@@ -865,10 +865,10 @@
 	data_count = 0;
 	if (bufcount >= remain) {
 		bufcount -= remain;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 		(data_count < remain)) {
 			channel->ch_wqueue[head++] =
-			port->info->xmit.buf[temp_tail];
+			port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -880,10 +880,10 @@
 	data_count1 = 0;
 	if (bufcount > 0) {
 		remain = bufcount;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 			(data_count1 < remain)) {
 			channel->ch_wqueue[head++] =
-				port->info->xmit.buf[temp_tail];
+				port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -892,7 +892,7 @@
 		}
 	}
 
-	port->info->xmit.tail = temp_tail;
+	port->state->xmit.tail = temp_tail;
 
 	data_count += data_count1;
 	if (data_count) {
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 611c97a..bea5c21 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -286,7 +286,7 @@
 {
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -325,7 +325,7 @@
 
 static void receive_chars(struct uart_sio_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned char flag;
 	int max_count = 256;
@@ -398,7 +398,7 @@
 
 static void transmit_chars(struct uart_sio_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 9fd33e5..75ab006 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -184,7 +184,7 @@
 {
 	struct max3100_port *s = (struct max3100_port *)data;
 
-	if (s->port.info) {
+	if (s->port.state) {
 		max3100_dowork(s);
 		mod_timer(&s->timer, jiffies + s->poll_time);
 	}
@@ -261,7 +261,7 @@
 	int rxchars;
 	u16 tx, rx;
 	int conf, cconf, rts, crts;
-	struct circ_buf *xmit = &s->port.info->xmit;
+	struct circ_buf *xmit = &s->port.state->xmit;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 
@@ -307,8 +307,8 @@
 			}
 		}
 
-		if (rxchars > 16 && s->port.info->port.tty != NULL) {
-			tty_flip_buffer_push(s->port.info->port.tty);
+		if (rxchars > 16 && s->port.state->port.tty != NULL) {
+			tty_flip_buffer_push(s->port.state->port.tty);
 			rxchars = 0;
 		}
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -320,8 +320,8 @@
 		  (!uart_circ_empty(xmit) &&
 		   !uart_tx_stopped(&s->port))));
 
-	if (rxchars > 0 && s->port.info->port.tty != NULL)
-		tty_flip_buffer_push(s->port.info->port.tty);
+	if (rxchars > 0 && s->port.state->port.tty != NULL)
+		tty_flip_buffer_push(s->port.state->port.tty);
 }
 
 static irqreturn_t max3100_irq(int irqno, void *dev_id)
@@ -429,7 +429,7 @@
 	int baud = 0;
 	unsigned cflag;
 	u32 param_new, param_mask, parity = 0;
-	struct tty_struct *tty = s->port.info->port.tty;
+	struct tty_struct *tty = s->port.state->port.tty;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 	if (!tty)
@@ -529,7 +529,7 @@
 			MAX3100_STATUS_OE;
 
 	/* we are sending char from a workqueue so enable */
-	s->port.info->port.tty->low_latency = 1;
+	s->port.state->port.tty->low_latency = 1;
 
 	if (s->poll_time > 0)
 		del_timer_sync(&s->timer);
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 0eefb07..b443824 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -323,7 +323,7 @@
 		uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
 	}
 
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 }
 
 /****************************************************************************/
@@ -331,7 +331,7 @@
 static void mcf_tx_chars(struct mcf_uart *pp)
 {
 	struct uart_port *port = &pp->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		/* Send special char - probably flow control */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index abbd146..d7bcd07 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -745,7 +745,7 @@
 static inline int
 mpc52xx_uart_int_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch, flag;
 	unsigned short status;
 
@@ -812,7 +812,7 @@
 static inline int
 mpc52xx_uart_int_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	/* Process out of band chars */
 	if (port->x_char) {
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 61d3ade..b5496c2 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -936,7 +936,7 @@
 static int mpsc_rx_intr(struct mpsc_port_info *pi)
 {
 	struct mpsc_rx_desc *rxre;
-	struct tty_struct *tty = pi->port.info->port.tty;
+	struct tty_struct *tty = pi->port.state->port.tty;
 	u32	cmdstat, bytes_in, i;
 	int	rc = 0;
 	u8	*bp;
@@ -1109,7 +1109,7 @@
 
 static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
 {
-	struct circ_buf *xmit = &pi->port.info->xmit;
+	struct circ_buf *xmit = &pi->port.state->xmit;
 	u8 *bp;
 	u32 i;
 
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index f7c24ba..b05c5aa 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -88,7 +88,7 @@
 
 static void handle_rx(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int sr;
 
 	/*
@@ -136,7 +136,7 @@
 
 static void handle_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct msm_port *msm_port = UART_TO_MSM(port);
 	int sent_tx;
 
@@ -169,7 +169,7 @@
 {
 	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 	port->icount.cts++;
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t msm_irq(int irq, void *dev_id)
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 953a5ff..7571aaa 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -199,7 +199,7 @@
 static void mux_write(struct uart_port *port)
 {
 	int count;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if(port->x_char) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -243,7 +243,7 @@
 static void mux_read(struct uart_port *port)
 {
 	int data;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 3e5dda8..7735c9f 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -140,7 +140,7 @@
 
 static inline void netx_transmit_buffer(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		writel(port->x_char, port->membase + UART_DR);
@@ -185,7 +185,7 @@
 
 static void netx_txint(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		netx_stop_tx(port);
@@ -201,7 +201,7 @@
 static void netx_rxint(struct uart_port *port)
 {
 	unsigned char rx, flg, status;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
 		rx = readl(port->membase + UART_DR);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 9e150b1..e1ab8ec 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -126,7 +126,7 @@
 static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 {
 	struct nwpserial_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	irqreturn_t ret;
 	unsigned int iir;
 	unsigned char ch;
@@ -261,7 +261,7 @@
 	struct nwpserial_port *up;
 	struct circ_buf *xmit;
 	up = container_of(port, struct nwpserial_port, port);
-	xmit  = &up->port.info->xmit;
+	xmit  = &up->port.state->xmit;
 
 	if (port->x_char) {
 		nwpserial_putchar(up, up->port.x_char);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 9c1243f..0700cd1 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -242,12 +242,12 @@
 	}
 
 	/* Sanity check, make sure the old bug is no longer happening */
-	if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
+	if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
 		WARN_ON(1);
 		(void)read_zsdata(uap);
 		return NULL;
 	}
-	tty = uap->port.info->port.tty;
+	tty = uap->port.state->port.tty;
 
 	while (1) {
 		error = 0;
@@ -369,7 +369,7 @@
 			uart_handle_cts_change(&uap->port,
 					       !(status & CTS));
 
-		wake_up_interruptible(&uap->port.info->delta_msr_wait);
+		wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 	}
 
 	if (status & BRK_ABRT)
@@ -420,9 +420,9 @@
 		return;
 	}
 
-	if (uap->port.info == NULL)
+	if (uap->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &uap->port.info->xmit;
+	xmit = &uap->port.state->xmit;
 	if (uart_circ_empty(xmit)) {
 		uart_write_wakeup(&uap->port);
 		goto ack_tx_int;
@@ -655,7 +655,7 @@
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		write_zsdata(uap, xmit->buf[xmit->tail]);
 		zssync(uap);
@@ -1645,7 +1645,7 @@
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
@@ -1676,7 +1676,7 @@
 	/* Shut the chip down */
 	pmz_set_scc_power(uap, 0);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	pmz_debug("suspend, switching complete\n");
@@ -1705,7 +1705,7 @@
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 	if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1737,7 +1737,7 @@
 	}
 
  bail:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	/* Right now, we deal with delay by blocking here, I'll be
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 1bb8f1b..0aa75a9 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -100,7 +100,7 @@
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -112,7 +112,7 @@
 	struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		pnx8xxx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -181,7 +181,7 @@
 
 static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -243,7 +243,7 @@
 
 static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index a48a8a1..6443b7f 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -96,7 +96,7 @@
 
 static inline void receive_chars(struct uart_pxa_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch, flag;
 	int max_count = 256;
 
@@ -161,7 +161,7 @@
 
 static void transmit_chars(struct uart_pxa_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -220,7 +220,7 @@
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 /*
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 94530f0..7f5e268 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -117,7 +117,7 @@
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -129,7 +129,7 @@
 	struct sa1100_port *sport = (struct sa1100_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		sa1100_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -189,7 +189,7 @@
 static void
 sa1100_rx_chars(struct sa1100_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -239,7 +239,7 @@
 
 static void sa1100_tx_chars(struct sa1100_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		UART_PUT_CHAR(sport, sport->port.x_char);
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index c8851a0..1523e8d 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -196,7 +196,7 @@
 {
 	struct s3c24xx_uart_port *ourport = dev_id;
 	struct uart_port *port = &ourport->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int ufcon, ch, flag, ufstat, uerstat;
 	int max_count = 64;
 
@@ -281,7 +281,7 @@
 {
 	struct s3c24xx_uart_port *ourport = id;
 	struct uart_port *port = &ourport->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -992,10 +992,10 @@
 		struct ktermios *termios;
 		struct tty_struct *tty;
 
-		if (uport->info == NULL)
+		if (uport->state == NULL)
 			goto exit;
 
-		tty = uport->info->port.tty;
+		tty = uport->state->port.tty;
 
 		if (tty == NULL)
 			goto exit;
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 319e8b8..a2f2b32 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -384,13 +384,13 @@
 		uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void sbd_transmit_chars(struct sbd_port *sport)
 {
 	struct uart_port *uport = &sport->port;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned int mask;
 	int stop_tx;
 
@@ -440,7 +440,7 @@
 
 	if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
 		     S_DUART_IN_PIN_CHNG))
-		wake_up_interruptible(&uport->info->delta_msr_wait);
+		wake_up_interruptible(&uport->state->port.delta_msr_wait);
 }
 
 static irqreturn_t sbd_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index e0be11c..75038ad 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -140,8 +140,8 @@
 	char flag;
 	u8 status;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	while (limit-- > 0) {
 		status = READ_SC_PORT(port, SR);
@@ -190,10 +190,10 @@
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		sc26xx_disable_irq(port, IMR_TXRDY);
 		return;
@@ -316,7 +316,7 @@
 /* port->lock held by caller.  */
 static void sc26xx_start_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!uart_circ_empty(xmit)) {
 		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index b0bb29d..2514d00 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/serial_core.h>
 #include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
@@ -52,8 +52,6 @@
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#define uart_users(state)	((state)->count + (state)->info.port.blocked_open)
-
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 #define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
 #else
@@ -71,19 +69,19 @@
  */
 void uart_write_wakeup(struct uart_port *port)
 {
-	struct uart_info *info = port->info;
+	struct uart_state *state = port->state;
 	/*
 	 * This means you called this function _after_ the port was
 	 * closed.  No cookie for you.
 	 */
-	BUG_ON(!info);
-	tasklet_schedule(&info->tlet);
+	BUG_ON(!state);
+	tasklet_schedule(&state->tlet);
 }
 
 static void uart_stop(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -94,9 +92,9 @@
 static void __uart_start(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
-	if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf &&
+	if (!uart_circ_empty(&state->xmit) && state->xmit.buf &&
 	    !tty->stopped && !tty->hw_stopped)
 		port->ops->start_tx(port);
 }
@@ -104,7 +102,7 @@
 static void uart_start(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -115,7 +113,7 @@
 static void uart_tasklet_action(unsigned long data)
 {
 	struct uart_state *state = (struct uart_state *)data;
-	tty_wakeup(state->info.port.tty);
+	tty_wakeup(state->port.tty);
 }
 
 static inline void
@@ -141,12 +139,12 @@
  */
 static int uart_startup(struct uart_state *state, int init_hw)
 {
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long page;
 	int retval = 0;
 
-	if (info->flags & UIF_INITIALIZED)
+	if (port->flags & ASYNC_INITIALIZED)
 		return 0;
 
 	/*
@@ -154,26 +152,26 @@
 	 * once we have successfully opened the port.  Also set
 	 * up the tty->alt_speed kludge
 	 */
-	set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	set_bit(TTY_IO_ERROR, &port->tty->flags);
 
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		return 0;
 
 	/*
 	 * Initialise and allocate the transmit and temporary
 	 * buffer.
 	 */
-	if (!info->xmit.buf) {
+	if (!state->xmit.buf) {
 		/* This is protected by the per port mutex */
 		page = get_zeroed_page(GFP_KERNEL);
 		if (!page)
 			return -ENOMEM;
 
-		info->xmit.buf = (unsigned char *) page;
-		uart_circ_clear(&info->xmit);
+		state->xmit.buf = (unsigned char *) page;
+		uart_circ_clear(&state->xmit);
 	}
 
-	retval = port->ops->startup(port);
+	retval = uport->ops->startup(uport);
 	if (retval == 0) {
 		if (init_hw) {
 			/*
@@ -185,20 +183,20 @@
 			 * Setup the RTS and DTR signals once the
 			 * port is open and ready to respond.
 			 */
-			if (info->port.tty->termios->c_cflag & CBAUD)
-				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+			if (port->tty->termios->c_cflag & CBAUD)
+				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
-		if (info->flags & UIF_CTS_FLOW) {
-			spin_lock_irq(&port->lock);
-			if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
-				info->port.tty->hw_stopped = 1;
-			spin_unlock_irq(&port->lock);
+		if (port->flags & ASYNC_CTS_FLOW) {
+			spin_lock_irq(&uport->lock);
+			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
+				port->tty->hw_stopped = 1;
+			spin_unlock_irq(&uport->lock);
 		}
 
-		info->flags |= UIF_INITIALIZED;
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
 
 	if (retval && capable(CAP_SYS_ADMIN))
@@ -214,9 +212,9 @@
  */
 static void uart_shutdown(struct uart_state *state)
 {
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
-	struct tty_struct *tty = info->port.tty;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
 
 	/*
 	 * Set the TTY IO error marker
@@ -224,14 +222,12 @@
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (info->flags & UIF_INITIALIZED) {
-		info->flags &= ~UIF_INITIALIZED;
-
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
 		if (!tty || (tty->termios->c_cflag & HUPCL))
-			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
 		/*
 		 * clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -240,30 +236,30 @@
 		 * any outstanding file descriptors should be pointing at
 		 * hung_up_tty_fops now.
 		 */
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 
 		/*
 		 * Free the IRQ and disable the port.
 		 */
-		port->ops->shutdown(port);
+		uport->ops->shutdown(uport);
 
 		/*
 		 * Ensure that the IRQ handler isn't running on another CPU.
 		 */
-		synchronize_irq(port->irq);
+		synchronize_irq(uport->irq);
 	}
 
 	/*
 	 * kill off our tasklet
 	 */
-	tasklet_kill(&info->tlet);
+	tasklet_kill(&state->tlet);
 
 	/*
 	 * Free the transmit buffer page.
 	 */
-	if (info->xmit.buf) {
-		free_page((unsigned long)info->xmit.buf);
-		info->xmit.buf = NULL;
+	if (state->xmit.buf) {
+		free_page((unsigned long)state->xmit.buf);
+		state->xmit.buf = NULL;
 	}
 }
 
@@ -430,15 +426,16 @@
 static void
 uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 {
-	struct tty_struct *tty = state->info.port.tty;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
+	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 
 	/*
 	 * If we have no tty, termios, or the port does not exist,
 	 * then we can't set the parameters for this port.
 	 */
-	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+	if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
 		return;
 
 	termios = tty->termios;
@@ -447,16 +444,16 @@
 	 * Set flags based on termios cflag
 	 */
 	if (termios->c_cflag & CRTSCTS)
-		state->info.flags |= UIF_CTS_FLOW;
+		set_bit(ASYNCB_CTS_FLOW, &port->flags);
 	else
-		state->info.flags &= ~UIF_CTS_FLOW;
+		clear_bit(ASYNCB_CTS_FLOW, &port->flags);
 
 	if (termios->c_cflag & CLOCAL)
-		state->info.flags &= ~UIF_CHECK_CD;
+		clear_bit(ASYNCB_CHECK_CD, &port->flags);
 	else
-		state->info.flags |= UIF_CHECK_CD;
+		set_bit(ASYNCB_CHECK_CD, &port->flags);
 
-	port->ops->set_termios(port, termios, old_termios);
+	uport->ops->set_termios(uport, termios, old_termios);
 }
 
 static inline int
@@ -482,7 +479,7 @@
 {
 	struct uart_state *state = tty->driver_data;
 
-	return __uart_put_char(state->port, &state->info.xmit, ch);
+	return __uart_put_char(state->uart_port, &state->xmit, ch);
 }
 
 static void uart_flush_chars(struct tty_struct *tty)
@@ -508,8 +505,8 @@
 		return -EL3HLT;
 	}
 
-	port = state->port;
-	circ = &state->info.xmit;
+	port = state->uart_port;
+	circ = &state->xmit;
 
 	if (!circ->buf)
 		return 0;
@@ -539,9 +536,9 @@
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&state->port->lock, flags);
-	ret = uart_circ_chars_free(&state->info.xmit);
-	spin_unlock_irqrestore(&state->port->lock, flags);
+	spin_lock_irqsave(&state->uart_port->lock, flags);
+	ret = uart_circ_chars_free(&state->xmit);
+	spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	return ret;
 }
 
@@ -551,9 +548,9 @@
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&state->port->lock, flags);
-	ret = uart_circ_chars_pending(&state->info.xmit);
-	spin_unlock_irqrestore(&state->port->lock, flags);
+	spin_lock_irqsave(&state->uart_port->lock, flags);
+	ret = uart_circ_chars_pending(&state->xmit);
+	spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	return ret;
 }
 
@@ -572,11 +569,11 @@
 		return;
 	}
 
-	port = state->port;
+	port = state->uart_port;
 	pr_debug("uart_flush_buffer(%d) called\n", tty->index);
 
 	spin_lock_irqsave(&port->lock, flags);
-	uart_circ_clear(&state->info.xmit);
+	uart_circ_clear(&state->xmit);
 	if (port->ops->flush_buffer)
 		port->ops->flush_buffer(port);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -590,7 +587,7 @@
 static void uart_send_xchar(struct tty_struct *tty, char ch)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	if (port->ops->send_xchar)
@@ -613,13 +610,13 @@
 		uart_send_xchar(tty, STOP_CHAR(tty));
 
 	if (tty->termios->c_cflag & CRTSCTS)
-		uart_clear_mctrl(state->port, TIOCM_RTS);
+		uart_clear_mctrl(state->uart_port, TIOCM_RTS);
 }
 
 static void uart_unthrottle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
 	if (I_IXOFF(tty)) {
 		if (port->x_char)
@@ -635,35 +632,36 @@
 static int uart_get_info(struct uart_state *state,
 			 struct serial_struct __user *retinfo)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	struct serial_struct tmp;
 
 	memset(&tmp, 0, sizeof(tmp));
 
 	/* Ensure the state we copy is consistent and no hardware changes
 	   occur as we go */
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	tmp.type	    = port->type;
-	tmp.line	    = port->line;
-	tmp.port	    = port->iobase;
+	tmp.type	    = uport->type;
+	tmp.line	    = uport->line;
+	tmp.port	    = uport->iobase;
 	if (HIGH_BITS_OFFSET)
-		tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
-	tmp.irq		    = port->irq;
-	tmp.flags	    = port->flags;
-	tmp.xmit_fifo_size  = port->fifosize;
-	tmp.baud_base	    = port->uartclk / 16;
-	tmp.close_delay	    = state->close_delay / 10;
-	tmp.closing_wait    = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+		tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+	tmp.irq		    = uport->irq;
+	tmp.flags	    = uport->flags;
+	tmp.xmit_fifo_size  = uport->fifosize;
+	tmp.baud_base	    = uport->uartclk / 16;
+	tmp.close_delay	    = port->close_delay / 10;
+	tmp.closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				state->closing_wait / 10;
-	tmp.custom_divisor  = port->custom_divisor;
-	tmp.hub6	    = port->hub6;
-	tmp.io_type         = port->iotype;
-	tmp.iomem_reg_shift = port->regshift;
-	tmp.iomem_base      = (void *)(unsigned long)port->mapbase;
+				port->closing_wait / 10;
+	tmp.custom_divisor  = uport->custom_divisor;
+	tmp.hub6	    = uport->hub6;
+	tmp.io_type         = uport->iotype;
+	tmp.iomem_reg_shift = uport->regshift;
+	tmp.iomem_base      = (void *)(unsigned long)uport->mapbase;
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -674,7 +672,8 @@
 			 struct serial_struct __user *newinfo)
 {
 	struct serial_struct new_serial;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long new_port;
 	unsigned int change_irq, change_port, closing_wait;
 	unsigned int old_custom_divisor, close_delay;
@@ -691,58 +690,58 @@
 	new_serial.irq = irq_canonicalize(new_serial.irq);
 	close_delay = new_serial.close_delay * 10;
 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 
 	/*
-	 * This semaphore protects state->count.  It is also
+	 * This semaphore protects port->count.  It is also
 	 * very useful to prevent opens.  Also, take the
 	 * port configuration semaphore to make sure that a
 	 * module insertion/removal doesn't change anything
 	 * under us.
 	 */
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	change_irq  = !(port->flags & UPF_FIXED_PORT)
-		&& new_serial.irq != port->irq;
+	change_irq  = !(uport->flags & UPF_FIXED_PORT)
+		&& new_serial.irq != uport->irq;
 
 	/*
 	 * Since changing the 'type' of the port changes its resource
 	 * allocations, we should treat type changes the same as
 	 * IO port changes.
 	 */
-	change_port = !(port->flags & UPF_FIXED_PORT)
-		&& (new_port != port->iobase ||
-		    (unsigned long)new_serial.iomem_base != port->mapbase ||
-		    new_serial.hub6 != port->hub6 ||
-		    new_serial.io_type != port->iotype ||
-		    new_serial.iomem_reg_shift != port->regshift ||
-		    new_serial.type != port->type);
+	change_port = !(uport->flags & UPF_FIXED_PORT)
+		&& (new_port != uport->iobase ||
+		    (unsigned long)new_serial.iomem_base != uport->mapbase ||
+		    new_serial.hub6 != uport->hub6 ||
+		    new_serial.io_type != uport->iotype ||
+		    new_serial.iomem_reg_shift != uport->regshift ||
+		    new_serial.type != uport->type);
 
-	old_flags = port->flags;
+	old_flags = uport->flags;
 	new_flags = new_serial.flags;
-	old_custom_divisor = port->custom_divisor;
+	old_custom_divisor = uport->custom_divisor;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
 		if (change_irq || change_port ||
-		    (new_serial.baud_base != port->uartclk / 16) ||
-		    (close_delay != state->close_delay) ||
-		    (closing_wait != state->closing_wait) ||
+		    (new_serial.baud_base != uport->uartclk / 16) ||
+		    (close_delay != port->close_delay) ||
+		    (closing_wait != port->closing_wait) ||
 		    (new_serial.xmit_fifo_size &&
-		     new_serial.xmit_fifo_size != port->fifosize) ||
+		     new_serial.xmit_fifo_size != uport->fifosize) ||
 		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
 			goto exit;
-		port->flags = ((port->flags & ~UPF_USR_MASK) |
+		uport->flags = ((uport->flags & ~UPF_USR_MASK) |
 			       (new_flags & UPF_USR_MASK));
-		port->custom_divisor = new_serial.custom_divisor;
+		uport->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
 	/*
 	 * Ask the low level driver to verify the settings.
 	 */
-	if (port->ops->verify_port)
-		retval = port->ops->verify_port(port, &new_serial);
+	if (uport->ops->verify_port)
+		retval = uport->ops->verify_port(uport, &new_serial);
 
 	if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
 	    (new_serial.baud_base < 9600))
@@ -757,7 +756,7 @@
 		/*
 		 * Make sure that we are the sole user of this port.
 		 */
-		if (uart_users(state) > 1)
+		if (tty_port_users(port) > 1)
 			goto exit;
 
 		/*
@@ -771,31 +770,31 @@
 		unsigned long old_iobase, old_mapbase;
 		unsigned int old_type, old_iotype, old_hub6, old_shift;
 
-		old_iobase = port->iobase;
-		old_mapbase = port->mapbase;
-		old_type = port->type;
-		old_hub6 = port->hub6;
-		old_iotype = port->iotype;
-		old_shift = port->regshift;
+		old_iobase = uport->iobase;
+		old_mapbase = uport->mapbase;
+		old_type = uport->type;
+		old_hub6 = uport->hub6;
+		old_iotype = uport->iotype;
+		old_shift = uport->regshift;
 
 		/*
 		 * Free and release old regions
 		 */
 		if (old_type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+			uport->ops->release_port(uport);
 
-		port->iobase = new_port;
-		port->type = new_serial.type;
-		port->hub6 = new_serial.hub6;
-		port->iotype = new_serial.io_type;
-		port->regshift = new_serial.iomem_reg_shift;
-		port->mapbase = (unsigned long)new_serial.iomem_base;
+		uport->iobase = new_port;
+		uport->type = new_serial.type;
+		uport->hub6 = new_serial.hub6;
+		uport->iotype = new_serial.io_type;
+		uport->regshift = new_serial.iomem_reg_shift;
+		uport->mapbase = (unsigned long)new_serial.iomem_base;
 
 		/*
 		 * Claim and map the new regions
 		 */
-		if (port->type != PORT_UNKNOWN) {
-			retval = port->ops->request_port(port);
+		if (uport->type != PORT_UNKNOWN) {
+			retval = uport->ops->request_port(uport);
 		} else {
 			/* Always success - Jean II */
 			retval = 0;
@@ -806,19 +805,19 @@
 		 * new port, try to restore the old settings.
 		 */
 		if (retval && old_type != PORT_UNKNOWN) {
-			port->iobase = old_iobase;
-			port->type = old_type;
-			port->hub6 = old_hub6;
-			port->iotype = old_iotype;
-			port->regshift = old_shift;
-			port->mapbase = old_mapbase;
-			retval = port->ops->request_port(port);
+			uport->iobase = old_iobase;
+			uport->type = old_type;
+			uport->hub6 = old_hub6;
+			uport->iotype = old_iotype;
+			uport->regshift = old_shift;
+			uport->mapbase = old_mapbase;
+			retval = uport->ops->request_port(uport);
 			/*
 			 * If we failed to restore the old settings,
 			 * we fail like this.
 			 */
 			if (retval)
-				port->type = PORT_UNKNOWN;
+				uport->type = PORT_UNKNOWN;
 
 			/*
 			 * We failed anyway.
@@ -830,45 +829,45 @@
 	}
 
 	if (change_irq)
-		port->irq      = new_serial.irq;
-	if (!(port->flags & UPF_FIXED_PORT))
-		port->uartclk  = new_serial.baud_base * 16;
-	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
+		uport->irq      = new_serial.irq;
+	if (!(uport->flags & UPF_FIXED_PORT))
+		uport->uartclk  = new_serial.baud_base * 16;
+	uport->flags            = (uport->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
-	port->custom_divisor   = new_serial.custom_divisor;
-	state->close_delay     = close_delay;
-	state->closing_wait    = closing_wait;
+	uport->custom_divisor   = new_serial.custom_divisor;
+	port->close_delay     = close_delay;
+	port->closing_wait    = closing_wait;
 	if (new_serial.xmit_fifo_size)
-		port->fifosize = new_serial.xmit_fifo_size;
-	if (state->info.port.tty)
-		state->info.port.tty->low_latency =
-			(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+		uport->fifosize = new_serial.xmit_fifo_size;
+	if (port->tty)
+		port->tty->low_latency =
+			(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
 	retval = 0;
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		goto exit;
-	if (state->info.flags & UIF_INITIALIZED) {
-		if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
-		    old_custom_divisor != port->custom_divisor) {
+	if (port->flags & ASYNC_INITIALIZED) {
+		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
+		    old_custom_divisor != uport->custom_divisor) {
 			/*
 			 * If they're setting up a custom divisor or speed,
 			 * instead of clearing it, then bitch about it. No
 			 * need to rate-limit; it's CAP_SYS_ADMIN only.
 			 */
-			if (port->flags & UPF_SPD_MASK) {
+			if (uport->flags & UPF_SPD_MASK) {
 				char buf[64];
 				printk(KERN_NOTICE
 				       "%s sets custom speed on %s. This "
 				       "is deprecated.\n", current->comm,
-				       tty_name(state->info.port.tty, buf));
+				       tty_name(port->tty, buf));
 			}
 			uart_change_speed(state, NULL);
 		}
 	} else
 		retval = uart_startup(state, 1);
  exit:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return retval;
 }
 
@@ -880,10 +879,11 @@
 static int uart_get_lsr_info(struct uart_state *state,
 			     unsigned int __user *value)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int result;
 
-	result = port->ops->tx_empty(port);
+	result = uport->ops->tx_empty(uport);
 
 	/*
 	 * If we're about to load something into the transmit
@@ -891,9 +891,9 @@
 	 * avoid a race condition (depending on when the transmit
 	 * interrupt happens).
 	 */
-	if (port->x_char ||
-	    ((uart_circ_chars_pending(&state->info.xmit) > 0) &&
-	     !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped))
+	if (uport->x_char ||
+	    ((uart_circ_chars_pending(&state->xmit) > 0) &&
+	     !port->tty->stopped && !port->tty->hw_stopped))
 		result &= ~TIOCSER_TEMT;
 
 	return put_user(result, value);
@@ -902,19 +902,20 @@
 static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport = state->uart_port;
 	int result = -EIO;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		result = port->mctrl;
+		result = uport->mctrl;
 
-		spin_lock_irq(&port->lock);
-		result |= port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		result |= uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return result;
 }
@@ -924,36 +925,39 @@
 	      unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	int ret = -EIO;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		uart_update_mctrl(port, set, clear);
+		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return ret;
 }
 
 static int uart_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport = state->uart_port;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (port->type != PORT_UNKNOWN)
-		port->ops->break_ctl(port, break_state);
+	if (uport->type != PORT_UNKNOWN)
+		uport->ops->break_ctl(uport, break_state);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return 0;
 }
 
 static int uart_do_autoconfig(struct uart_state *state)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	int flags, ret;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -964,33 +968,33 @@
 	 * changing, and hence any extra opens of the port while
 	 * we're auto-configuring.
 	 */
-	if (mutex_lock_interruptible(&state->mutex))
+	if (mutex_lock_interruptible(&port->mutex))
 		return -ERESTARTSYS;
 
 	ret = -EBUSY;
-	if (uart_users(state) == 1) {
+	if (tty_port_users(port) == 1) {
 		uart_shutdown(state);
 
 		/*
 		 * If we already have a port type configured,
 		 * we must release its resources.
 		 */
-		if (port->type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+		if (uport->type != PORT_UNKNOWN)
+			uport->ops->release_port(uport);
 
 		flags = UART_CONFIG_TYPE;
-		if (port->flags & UPF_AUTO_IRQ)
+		if (uport->flags & UPF_AUTO_IRQ)
 			flags |= UART_CONFIG_IRQ;
 
 		/*
 		 * This will claim the ports resources if
 		 * a port is found.
 		 */
-		port->ops->config_port(port, flags);
+		uport->ops->config_port(uport, flags);
 
 		ret = uart_startup(state, 1);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return ret;
 }
 
@@ -999,11 +1003,15 @@
  * - mask passed in arg for lines of interest
  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
  * Caller should use TIOCGICOUNT to see which one it was
+ *
+ * FIXME: This wants extracting into a common all driver implementation
+ * of TIOCMWAIT using tty_port.
  */
 static int
 uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_icount cprev, cnow;
 	int ret;
@@ -1011,20 +1019,20 @@
 	/*
 	 * note the counters on entry
 	 */
-	spin_lock_irq(&port->lock);
-	memcpy(&cprev, &port->icount, sizeof(struct uart_icount));
+	spin_lock_irq(&uport->lock);
+	memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
 
 	/*
 	 * Force modem status interrupts on
 	 */
-	port->ops->enable_ms(port);
-	spin_unlock_irq(&port->lock);
+	uport->ops->enable_ms(uport);
+	spin_unlock_irq(&uport->lock);
 
-	add_wait_queue(&state->info.delta_msr_wait, &wait);
+	add_wait_queue(&port->delta_msr_wait, &wait);
 	for (;;) {
-		spin_lock_irq(&port->lock);
-		memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&uport->lock);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -1048,7 +1056,7 @@
 	}
 
 	current->state = TASK_RUNNING;
-	remove_wait_queue(&state->info.delta_msr_wait, &wait);
+	remove_wait_queue(&port->delta_msr_wait, &wait);
 
 	return ret;
 }
@@ -1064,11 +1072,11 @@
 {
 	struct serial_icounter_struct icount;
 	struct uart_icount cnow;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 
-	spin_lock_irq(&port->lock);
-	memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-	spin_unlock_irq(&port->lock);
+	spin_lock_irq(&uport->lock);
+	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&uport->lock);
 
 	icount.cts         = cnow.cts;
 	icount.dsr         = cnow.dsr;
@@ -1093,6 +1101,7 @@
 	   unsigned long arg)
 {
 	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
 	void __user *uarg = (void __user *)arg;
 	int ret = -ENOIOCTLCMD;
 
@@ -1143,7 +1152,7 @@
 	if (ret != -ENOIOCTLCMD)
 		goto out;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
 	if (tty_hung_up_p(filp)) {
 		ret = -EIO;
@@ -1160,14 +1169,14 @@
 		break;
 
 	default: {
-		struct uart_port *port = state->port;
-		if (port->ops->ioctl)
-			ret = port->ops->ioctl(port, cmd, arg);
+		struct uart_port *uport = state->uart_port;
+		if (uport->ops->ioctl)
+			ret = uport->ops->ioctl(uport, cmd, arg);
 		break;
 	}
 	}
 out_up:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 out:
 	return ret;
 }
@@ -1175,10 +1184,10 @@
 static void uart_set_ldisc(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 
-	if (port->ops->set_ldisc)
-		port->ops->set_ldisc(port);
+	if (uport->ops->set_ldisc)
+		uport->ops->set_ldisc(uport);
 }
 
 static void uart_set_termios(struct tty_struct *tty,
@@ -1207,7 +1216,7 @@
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
-		uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+		uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR);
 
 	/* Handle transition away from B0 status */
 	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
@@ -1215,25 +1224,25 @@
 		if (!(cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags))
 			mask |= TIOCM_RTS;
-		uart_set_mctrl(state->port, mask);
+		uart_set_mctrl(state->uart_port, mask);
 	}
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
-		spin_lock_irqsave(&state->port->lock, flags);
+		spin_lock_irqsave(&state->uart_port->lock, flags);
 		tty->hw_stopped = 0;
 		__uart_start(tty);
-		spin_unlock_irqrestore(&state->port->lock, flags);
+		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
 
 	/* Handle turning on CRTSCTS */
 	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
-		spin_lock_irqsave(&state->port->lock, flags);
-		if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+		spin_lock_irqsave(&state->uart_port->lock, flags);
+		if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) {
 			tty->hw_stopped = 1;
-			state->port->ops->stop_tx(state->port);
+			state->uart_port->ops->stop_tx(state->uart_port);
 		}
-		spin_unlock_irqrestore(&state->port->lock, flags);
+		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
 #if 0
 	/*
@@ -1244,7 +1253,7 @@
 	 */
 	if (!(old_termios->c_cflag & CLOCAL) &&
 	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->port.open_wait);
+		wake_up_interruptible(&state->uart_port.open_wait);
 #endif
 }
 
@@ -1256,40 +1265,39 @@
 static void uart_close(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port;
+	struct tty_port *port;
+	struct uart_port *uport;
 
 	BUG_ON(!kernel_locked());
 
-	if (!state || !state->port)
-		return;
+	uport = state->uart_port;
+	port = &state->port;
 
-	port = state->port;
+	pr_debug("uart_close(%d) called\n", uport->line);
 
-	pr_debug("uart_close(%d) called\n", port->line);
-
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
 	if (tty_hung_up_p(filp))
 		goto done;
 
-	if ((tty->count == 1) && (state->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
+		 * structure will be freed.  port->count should always
 		 * be one in these conditions.  If it's greater than
 		 * one, we've got real problems, since it means the
 		 * serial port won't be shutdown.
 		 */
 		printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
+		       "port->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--state->count < 0) {
+	if (--port->count < 0) {
 		printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
-		       tty->name, state->count);
-		state->count = 0;
+		       tty->name, port->count);
+		port->count = 0;
 	}
-	if (state->count)
+	if (port->count)
 		goto done;
 
 	/*
@@ -1299,24 +1307,24 @@
 	 */
 	tty->closing = 1;
 
-	if (state->closing_wait != USF_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait));
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts.
 	 */
-	if (state->info.flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->stop_rx(port);
+		uport->ops->stop_rx(uport);
 		spin_unlock_irqrestore(&port->lock, flags);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
-		uart_wait_until_sent(tty, port->timeout);
+		uart_wait_until_sent(tty, uport->timeout);
 	}
 
 	uart_shutdown(state);
@@ -1325,29 +1333,29 @@
 	tty_ldisc_flush(tty);
 
 	tty->closing = 0;
-	state->info.port.tty = NULL;
+	tty_port_tty_set(port, NULL);
 
-	if (state->info.port.blocked_open) {
-		if (state->close_delay)
-			msleep_interruptible(state->close_delay);
-	} else if (!uart_console(port)) {
+	if (port->blocked_open) {
+		if (port->close_delay)
+			msleep_interruptible(port->close_delay);
+	} else if (!uart_console(uport)) {
 		uart_change_pm(state, 3);
 	}
 
 	/*
 	 * Wake up anyone trying to open this port.
 	 */
-	state->info.flags &= ~UIF_NORMAL_ACTIVE;
-	wake_up_interruptible(&state->info.port.open_wait);
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+	wake_up_interruptible(&port->open_wait);
 
- done:
-	mutex_unlock(&state->mutex);
+done:
+	mutex_unlock(&port->mutex);
 }
 
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long char_time, expire;
 
 	if (port->type == PORT_UNKNOWN || port->fifosize == 0)
@@ -1412,22 +1420,22 @@
 static void uart_hangup(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_info *info = &state->info;
+	struct tty_port *port = &state->port;
 
 	BUG_ON(!kernel_locked());
-	pr_debug("uart_hangup(%d)\n", state->port->line);
+	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
 
-	mutex_lock(&state->mutex);
-	if (info->flags & UIF_NORMAL_ACTIVE) {
+	mutex_lock(&port->mutex);
+	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
-		state->count = 0;
-		info->flags &= ~UIF_NORMAL_ACTIVE;
-		info->port.tty = NULL;
-		wake_up_interruptible(&info->port.open_wait);
-		wake_up_interruptible(&info->delta_msr_wait);
+		port->count = 0;
+		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+		tty_port_tty_set(port, NULL);
+		wake_up_interruptible(&port->open_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 }
 
 /*
@@ -1438,8 +1446,8 @@
  */
 static void uart_update_termios(struct uart_state *state)
 {
-	struct tty_struct *tty = state->info.port.tty;
-	struct uart_port *port = state->port;
+	struct tty_struct *tty = state->port.tty;
+	struct uart_port *port = state->uart_port;
 
 	if (uart_console(port) && port->cons->cflag) {
 		tty->termios->c_cflag = port->cons->cflag;
@@ -1473,27 +1481,27 @@
 uart_block_til_ready(struct file *filp, struct uart_state *state)
 {
 	DECLARE_WAITQUEUE(wait, current);
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int mctrl;
 
-	info->port.blocked_open++;
-	state->count--;
+	port->blocked_open++;
+	port->count--;
 
-	add_wait_queue(&info->port.open_wait, &wait);
+	add_wait_queue(&port->open_wait, &wait);
 	while (1) {
 		set_current_state(TASK_INTERRUPTIBLE);
 
 		/*
 		 * If we have been hung up, tell userspace/restart open.
 		 */
-		if (tty_hung_up_p(filp) || info->port.tty == NULL)
+		if (tty_hung_up_p(filp) || port->tty == NULL)
 			break;
 
 		/*
 		 * If the port has been closed, tell userspace/restart open.
 		 */
-		if (!(info->flags & UIF_INITIALIZED))
+		if (!(port->flags & ASYNC_INITIALIZED))
 			break;
 
 		/*
@@ -1506,8 +1514,8 @@
 		 * have set TTY_IO_ERROR for a non-existant port.
 		 */
 		if ((filp->f_flags & O_NONBLOCK) ||
-		    (info->port.tty->termios->c_cflag & CLOCAL) ||
-		    (info->port.tty->flags & (1 << TTY_IO_ERROR)))
+		    (port->tty->termios->c_cflag & CLOCAL) ||
+		    (port->tty->flags & (1 << TTY_IO_ERROR)))
 			break;
 
 		/*
@@ -1515,37 +1523,37 @@
 		 * not set RTS here - we want to make sure we catch
 		 * the data from the modem.
 		 */
-		if (info->port.tty->termios->c_cflag & CBAUD)
-			uart_set_mctrl(port, TIOCM_DTR);
+		if (port->tty->termios->c_cflag & CBAUD)
+			uart_set_mctrl(uport, TIOCM_DTR);
 
 		/*
 		 * and wait for the carrier to indicate that the
 		 * modem is ready for us.
 		 */
-		spin_lock_irq(&port->lock);
-		port->ops->enable_ms(port);
-		mctrl = port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		uport->ops->enable_ms(uport);
+		mctrl = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 		if (mctrl & TIOCM_CAR)
 			break;
 
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		schedule();
-		mutex_lock(&state->mutex);
+		mutex_lock(&port->mutex);
 
 		if (signal_pending(current))
 			break;
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->port.open_wait, &wait);
+	remove_wait_queue(&port->open_wait, &wait);
 
-	state->count++;
-	info->port.blocked_open--;
+	port->count++;
+	port->blocked_open--;
 
 	if (signal_pending(current))
 		return -ERESTARTSYS;
 
-	if (!info->port.tty || tty_hung_up_p(filp))
+	if (!port->tty || tty_hung_up_p(filp))
 		return -EAGAIN;
 
 	return 0;
@@ -1554,24 +1562,26 @@
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
+	struct tty_port *port;
 	int ret = 0;
 
 	state = drv->state + line;
-	if (mutex_lock_interruptible(&state->mutex)) {
+	port = &state->port;
+	if (mutex_lock_interruptible(&port->mutex)) {
 		ret = -ERESTARTSYS;
 		goto err;
 	}
 
-	state->count++;
-	if (!state->port || state->port->flags & UPF_DEAD) {
+	port->count++;
+	if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
 		ret = -ENXIO;
 		goto err_unlock;
 	}
 	return state;
 
  err_unlock:
-	state->count--;
-	mutex_unlock(&state->mutex);
+	port->count--;
+	mutex_unlock(&port->mutex);
  err:
 	return ERR_PTR(ret);
 }
@@ -1590,6 +1600,7 @@
 {
 	struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
 	struct uart_state *state;
+	struct tty_port *port;
 	int retval, line = tty->index;
 
 	BUG_ON(!kernel_locked());
@@ -1606,16 +1617,18 @@
 
 	/*
 	 * We take the semaphore inside uart_get to guarantee that we won't
-	 * be re-entered while allocating the info structure, or while we
+	 * be re-entered while allocating the state structure, or while we
 	 * request any IRQs that the driver may need.  This also has the nice
 	 * side-effect that it delays the action of uart_hangup, so we can
-	 * guarantee that info->port.tty will always contain something reasonable.
+	 * guarantee that state->port.tty will always contain something
+	 * reasonable.
 	 */
 	state = uart_get(drv, line);
 	if (IS_ERR(state)) {
 		retval = PTR_ERR(state);
 		goto fail;
 	}
+	port = &state->port;
 
 	/*
 	 * Once we set tty->driver_data here, we are guaranteed that
@@ -1623,25 +1636,25 @@
 	 * Any failures from here onwards should not touch the count.
 	 */
 	tty->driver_data = state;
-	state->port->info = &state->info;
-	tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	state->uart_port->state = state;
+	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 	tty->alt_speed = 0;
-	state->info.port.tty = tty;
+	tty_port_tty_set(port, tty);
 
 	/*
 	 * If the port is in the middle of closing, bail out now.
 	 */
 	if (tty_hung_up_p(filp)) {
 		retval = -EAGAIN;
-		state->count--;
-		mutex_unlock(&state->mutex);
+		port->count--;
+		mutex_unlock(&port->mutex);
 		goto fail;
 	}
 
 	/*
 	 * Make sure the device is in D0 state.
 	 */
-	if (state->count == 1)
+	if (port->count == 1)
 		uart_change_pm(state, 0);
 
 	/*
@@ -1654,18 +1667,18 @@
 	 */
 	if (retval == 0)
 		retval = uart_block_til_ready(filp, state);
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	/*
 	 * If this is the first open to succeed, adjust things to suit.
 	 */
-	if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) {
-		state->info.flags |= UIF_NORMAL_ACTIVE;
+	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
 		uart_update_termios(state);
 	}
 
- fail:
+fail:
 	return retval;
 }
 
@@ -1687,57 +1700,58 @@
 static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
 {
 	struct uart_state *state = drv->state + i;
+	struct tty_port *port = &state->port;
 	int pm_state;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 	char stat_buf[32];
 	unsigned int status;
 	int mmio;
 
-	if (!port)
+	if (!uport)
 		return;
 
-	mmio = port->iotype >= UPIO_MEM;
+	mmio = uport->iotype >= UPIO_MEM;
 	seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
-			port->line, uart_type(port),
+			uport->line, uart_type(uport),
 			mmio ? "mmio:0x" : "port:",
-			mmio ? (unsigned long long)port->mapbase
-			     : (unsigned long long) port->iobase,
-			port->irq);
+			mmio ? (unsigned long long)uport->mapbase
+			     : (unsigned long long)uport->iobase,
+			uport->irq);
 
-	if (port->type == PORT_UNKNOWN) {
+	if (uport->type == PORT_UNKNOWN) {
 		seq_putc(m, '\n');
 		return;
 	}
 
 	if (capable(CAP_SYS_ADMIN)) {
-		mutex_lock(&state->mutex);
+		mutex_lock(&port->mutex);
 		pm_state = state->pm_state;
 		if (pm_state)
 			uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		status = port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		status = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 		if (pm_state)
 			uart_change_pm(state, pm_state);
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 
 		seq_printf(m, " tx:%d rx:%d",
-				port->icount.tx, port->icount.rx);
-		if (port->icount.frame)
+				uport->icount.tx, uport->icount.rx);
+		if (uport->icount.frame)
 			seq_printf(m, " fe:%d",
-				port->icount.frame);
-		if (port->icount.parity)
+				uport->icount.frame);
+		if (uport->icount.parity)
 			seq_printf(m, " pe:%d",
-				port->icount.parity);
-		if (port->icount.brk)
+				uport->icount.parity);
+		if (uport->icount.brk)
 			seq_printf(m, " brk:%d",
-				port->icount.brk);
-		if (port->icount.overrun)
+				uport->icount.brk);
+		if (uport->icount.overrun)
 			seq_printf(m, " oe:%d",
-				port->icount.overrun);
+				uport->icount.overrun);
 
 #define INFOBIT(bit, str) \
-	if (port->mctrl & (bit)) \
+	if (uport->mctrl & (bit)) \
 		strncat(stat_buf, (str), sizeof(stat_buf) - \
 			strlen(stat_buf) - 2)
 #define STATBIT(bit, str) \
@@ -1958,7 +1972,7 @@
 
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
 	if (state->pm_state != pm_state) {
 		if (port->ops->pm)
@@ -1982,132 +1996,138 @@
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* we're going to avoid suspending serial console */
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(port->irq);
+		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	port->suspended = 1;
+	uport->suspended = 1;
 
-	if (state->info.flags & UIF_INITIALIZED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_INITIALIZED) {
+		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		state->info.flags = (state->info.flags & ~UIF_INITIALIZED)
-				     | UIF_SUSPENDED;
+		set_bit(ASYNCB_SUSPENDED, &port->flags);
+		clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&port->lock);
-		ops->stop_tx(port);
-		ops->set_mctrl(port, 0);
-		ops->stop_rx(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		ops->set_mctrl(uport, 0);
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
 
 		/*
 		 * Wait for the transmitter to empty.
 		 */
-		for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
 			msleep(10);
 		if (!tries)
 			printk(KERN_ERR "%s%s%s%d: Unable to drain "
 					"transmitter\n",
-			       port->dev ? dev_name(port->dev) : "",
-			       port->dev ? ": " : "",
+			       uport->dev ? dev_name(uport->dev) : "",
+			       uport->dev ? ": " : "",
 			       drv->dev_name,
-			       drv->tty_driver->name_base + port->line);
+			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(port);
+		ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(port))
-		console_stop(port->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	uart_change_pm(state, 3);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
+	struct ktermios termios;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
-		mutex_unlock(&state->mutex);
-		return 0;
-	}
-
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
-	if (!port->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(port->irq);
-		mutex_unlock(&state->mutex);
-		return 0;
-	}
-	port->suspended = 0;
-
-	/*
-	 * Re-enable the console device after suspending.
-	 */
-	if (uart_console(port)) {
-		struct ktermios termios;
-
 		/*
 		 * First try to use the console cflag setting.
 		 */
 		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = port->cons->cflag;
-
+		termios.c_cflag = uport->cons->cflag;
 		/*
 		 * If that's unset, use the tty termios setting.
 		 */
-		if (state->info.port.tty && termios.c_cflag == 0)
-			termios = *state->info.port.tty->termios;
-
-		uart_change_pm(state, 0);
-		port->ops->set_termios(port, &termios, NULL);
-		console_start(port->cons);
+		if (termios.c_cflag == 0)
+			termios = *state->port.tty->termios;
+		else {
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_input_baud_rate(&termios);
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_baud_rate(&termios);
+		}
+		uport->ops->set_termios(uport, &termios, NULL);
+		mutex_unlock(&port->mutex);
+		return 0;
 	}
 
-	if (state->info.flags & UIF_SUSPENDED) {
-		const struct uart_ops *ops = port->ops;
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		disable_irq_wake(uport->irq);
+		mutex_unlock(&port->mutex);
+		return 0;
+	}
+	uport->suspended = 0;
+
+	/*
+	 * Re-enable the console device after suspending.
+	 */
+	if (uart_console(uport)) {
+		uart_change_pm(state, 0);
+		uport->ops->set_termios(uport, &termios, NULL);
+		console_start(uport->cons);
+	}
+
+	if (port->flags & ASYNC_SUSPENDED) {
+		const struct uart_ops *ops = uport->ops;
 		int ret;
 
 		uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, 0);
-		spin_unlock_irq(&port->lock);
-		ret = ops->startup(port);
+		spin_lock_irq(&uport->lock);
+		ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		ret = ops->startup(uport);
 		if (ret == 0) {
 			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port);
-			spin_unlock_irq(&port->lock);
-			state->info.flags |= UIF_INITIALIZED;
+			spin_lock_irq(&uport->lock);
+			ops->set_mctrl(uport, uport->mctrl);
+			ops->start_tx(uport);
+			spin_unlock_irq(&uport->lock);
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
 		} else {
 			/*
 			 * Failed to resume - maybe hardware went away?
@@ -2117,10 +2137,10 @@
 			uart_shutdown(state);
 		}
 
-		state->info.flags &= ~UIF_SUSPENDED;
+		clear_bit(ASYNCB_SUSPENDED, &port->flags);
 	}
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return 0;
 }
@@ -2232,10 +2252,10 @@
 	int parity = 'n';
 	int flow = 'n';
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return -1;
 
-	port = state->port;
+	port = state->uart_port;
 	if (!(port->ops->poll_get_char && port->ops->poll_put_char))
 		return -1;
 
@@ -2253,10 +2273,10 @@
 	struct uart_state *state = drv->state + line;
 	struct uart_port *port;
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return -1;
 
-	port = state->port;
+	port = state->uart_port;
 	return port->ops->poll_get_char(port);
 }
 
@@ -2266,10 +2286,10 @@
 	struct uart_state *state = drv->state + line;
 	struct uart_port *port;
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return;
 
-	port = state->port;
+	port = state->uart_port;
 	port->ops->poll_put_char(port, ch);
 }
 #endif
@@ -2360,14 +2380,12 @@
 	 */
 	for (i = 0; i < drv->nr; i++) {
 		struct uart_state *state = drv->state + i;
+		struct tty_port *port = &state->port;
 
-		state->close_delay     = 500;	/* .5 seconds */
-		state->closing_wait    = 30000;	/* 30 seconds */
-		mutex_init(&state->mutex);
-
-		tty_port_init(&state->info.port);
-		init_waitqueue_head(&state->info.delta_msr_wait);
-		tasklet_init(&state->info.tlet, uart_tasklet_action,
+		tty_port_init(port);
+		port->close_delay     = 500;	/* .5 seconds */
+		port->closing_wait    = 30000;	/* 30 seconds */
+		tasklet_init(&state->tlet, uart_tasklet_action,
 			     (unsigned long)state);
 	}
 
@@ -2415,62 +2433,64 @@
  *	level uart drivers to expand uart_port, rather than having yet
  *	more levels of structures.
  */
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
 	struct uart_state *state;
+	struct tty_port *port;
 	int ret = 0;
 	struct device *tty_dev;
 
 	BUG_ON(in_interrupt());
 
-	if (port->line >= drv->nr)
+	if (uport->line >= drv->nr)
 		return -EINVAL;
 
-	state = drv->state + port->line;
+	state = drv->state + uport->line;
+	port = &state->port;
 
 	mutex_lock(&port_mutex);
-	mutex_lock(&state->mutex);
-	if (state->port) {
+	mutex_lock(&port->mutex);
+	if (state->uart_port) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	state->port = port;
+	state->uart_port = uport;
 	state->pm_state = -1;
 
-	port->cons = drv->cons;
-	port->info = &state->info;
+	uport->cons = drv->cons;
+	uport->state = state;
 
 	/*
 	 * If this port is a console, then the spinlock is already
 	 * initialised.
 	 */
-	if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
-		spin_lock_init(&port->lock);
-		lockdep_set_class(&port->lock, &port_lock_key);
+	if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) {
+		spin_lock_init(&uport->lock);
+		lockdep_set_class(&uport->lock, &port_lock_key);
 	}
 
-	uart_configure_port(drv, state, port);
+	uart_configure_port(drv, state, uport);
 
 	/*
 	 * Register the port whether it's detected or not.  This allows
 	 * setserial to be used to alter this ports parameters.
 	 */
-	tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
+	tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
 	if (likely(!IS_ERR(tty_dev))) {
 		device_init_wakeup(tty_dev, 1);
 		device_set_wakeup_enable(tty_dev, 0);
 	} else
 		printk(KERN_ERR "Cannot register tty device on line %d\n",
-		       port->line);
+		       uport->line);
 
 	/*
 	 * Ensure UPF_DEAD is not set.
 	 */
-	port->flags &= ~UPF_DEAD;
+	uport->flags &= ~UPF_DEAD;
 
  out:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	mutex_unlock(&port_mutex);
 
 	return ret;
@@ -2485,16 +2505,16 @@
  *	core driver.  No further calls will be made to the low-level code
  *	for this port.
  */
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
-	struct uart_info *info;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 
 	BUG_ON(in_interrupt());
 
-	if (state->port != port)
+	if (state->uart_port != uport)
 		printk(KERN_ALERT "Removing wrong port: %p != %p\n",
-			state->port, port);
+			state->uart_port, uport);
 
 	mutex_lock(&port_mutex);
 
@@ -2502,37 +2522,35 @@
 	 * Mark the port "dead" - this prevents any opens from
 	 * succeeding while we shut down the port.
 	 */
-	mutex_lock(&state->mutex);
-	port->flags |= UPF_DEAD;
-	mutex_unlock(&state->mutex);
+	mutex_lock(&port->mutex);
+	uport->flags |= UPF_DEAD;
+	mutex_unlock(&port->mutex);
 
 	/*
 	 * Remove the devices from the tty layer
 	 */
-	tty_unregister_device(drv->tty_driver, port->line);
+	tty_unregister_device(drv->tty_driver, uport->line);
 
-	info = &state->info;
-	if (info && info->port.tty)
-		tty_vhangup(info->port.tty);
+	if (port->tty)
+		tty_vhangup(port->tty);
 
 	/*
 	 * Free the port IO and memory resources, if any.
 	 */
-	if (port->type != PORT_UNKNOWN)
-		port->ops->release_port(port);
+	if (uport->type != PORT_UNKNOWN)
+		uport->ops->release_port(uport);
 
 	/*
 	 * Indicate that there isn't a port here anymore.
 	 */
-	port->type = PORT_UNKNOWN;
+	uport->type = PORT_UNKNOWN;
 
 	/*
 	 * Kill the tasklet, and free resources.
 	 */
-	if (info)
-		tasklet_kill(&info->tlet);
+	tasklet_kill(&state->tlet);
 
-	state->port = NULL;
+	state->uart_port = NULL;
 	mutex_unlock(&port_mutex);
 
 	return 0;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ed4648b..a3bb490 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -884,6 +884,7 @@
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 52db5cc..2e71bbc 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -154,7 +154,7 @@
 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, lsr, flg, max_count = 256;
 
 	status = UART_GET_LSR(port);		/* clears pending LSR interrupts */
@@ -210,7 +210,7 @@
 static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int count;
 
 	if (port->x_char) {
@@ -266,7 +266,7 @@
 	if (status & URMS_URTERI)
 		port->icount.rng++;
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index a7bf024..ea74470 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -138,7 +138,7 @@
 
 static void lh7a40xuart_rx_chars (struct uart_port* port)
 {
-	struct tty_struct* tty = port->info->port.tty;
+	struct tty_struct* tty = port->state->port.tty;
 	int cbRxMax = 256;	/* (Gross) limit on receive */
 	unsigned int data;	/* Received data and status */
 	unsigned int flag;
@@ -184,7 +184,7 @@
 
 static void lh7a40xuart_tx_chars (struct uart_port* port)
 {
-	struct circ_buf* xmit = &port->info->xmit;
+	struct circ_buf* xmit = &port->state->xmit;
 	int cbTxMax = port->fifosize;
 
 	if (port->x_char) {
@@ -241,7 +241,7 @@
 	if (delta & CTS)
 		uart_handle_cts_change (port, status & CTS);
 
-	wake_up_interruptible (&port->info->delta_msr_wait);
+	wake_up_interruptible (&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 54dd16d..0f7cf4c 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -272,7 +272,7 @@
 static inline void
 receive_chars(struct uart_txx9_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned int disr = *status;
 	int max_count = 256;
@@ -348,7 +348,7 @@
 
 static inline void transmit_chars(struct uart_txx9_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 32dc2fc..85119fb 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -361,7 +361,7 @@
 
 static void sci_transmit_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int stopped = uart_tx_stopped(port);
 	unsigned short status;
 	unsigned short ctrl;
@@ -426,7 +426,7 @@
 static inline void sci_receive_chars(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
 	unsigned char flag;
@@ -546,7 +546,7 @@
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	if (status & SCxSR_ORER(port)) {
 		/* overrun error */
@@ -600,7 +600,7 @@
 
 static inline int sci_handle_fifo_overrun(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int copied = 0;
 
 	if (port->type != PORT_SCIF)
@@ -623,7 +623,7 @@
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct sci_port *s = to_sci_port(port);
 
 	if (uart_handle_break(port))
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index d5276c0..9794e0c 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -469,9 +469,9 @@
 		return;
 	}
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* The serial_core stuffs are initilized, use them */
-		tty = port->sc_port.info->port.tty;
+		tty = port->sc_port.state->port.tty;
 	}
 	else {
 		/* Not registered yet - can't pass to tty layer.  */
@@ -550,9 +550,9 @@
 
 	BUG_ON(!port->sc_is_asynch);
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* We're initilized, using serial core infrastructure */
-		xmit = &port->sc_port.info->xmit;
+		xmit = &port->sc_port.state->xmit;
 	} else {
 		/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
 		 * initilized yet.  Just return.  Writes are going through
@@ -927,7 +927,7 @@
 	/* We can't look at the xmit buffer if we're not registered with serial core
 	 *  yet.  So only do the fancy recovery after registering
 	 */
-	if (!port->sc_port.info) {
+	if (!port->sc_port.state) {
 		/* Not yet registered with serial core - simple case */
 		puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
 		return;
@@ -936,8 +936,8 @@
 	/* somebody really wants this output, might be an
 	 * oops, kdb, panic, etc.  make sure they get it. */
 	if (spin_is_locked(&port->sc_port.lock)) {
-		int lhead = port->sc_port.info->xmit.head;
-		int ltail = port->sc_port.info->xmit.tail;
+		int lhead = port->sc_port.state->xmit.head;
+		int ltail = port->sc_port.state->xmit.tail;
 		int counter, got_lock = 0;
 
 		/*
@@ -962,13 +962,13 @@
 				break;
 			} else {
 				/* still locked */
-				if ((lhead != port->sc_port.info->xmit.head)
+				if ((lhead != port->sc_port.state->xmit.head)
 				    || (ltail !=
-					port->sc_port.info->xmit.tail)) {
+					port->sc_port.state->xmit.tail)) {
 					lhead =
-						port->sc_port.info->xmit.head;
+						port->sc_port.state->xmit.head;
 					ltail =
-						port->sc_port.info->xmit.tail;
+						port->sc_port.state->xmit.tail;
 					counter = 0;
 				}
 			}
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 1df5325..d548652 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -184,8 +184,8 @@
 {
 	struct tty_struct *tty = NULL;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	if (sunhv_ops->receive_chars(port, tty))
 		sun_do_break();
@@ -197,10 +197,10 @@
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
 
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0355efe..d1ad341 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -117,8 +117,8 @@
 	int count = 0;
 	int i;
 
-	if (up->port.info != NULL)		/* Unopened serial console */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL)		/* Unopened serial console */
+		tty = up->port.state->port.tty;
 
 	/* Read number of BYTES (Character + Status) available. */
 	if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
@@ -229,7 +229,7 @@
 static void transmit_chars(struct uart_sunsab_port *up,
 			   union sab82532_irq_status *stat)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
@@ -297,7 +297,7 @@
 		up->port.icount.dsr++;
 	}
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
@@ -429,7 +429,7 @@
 static void sunsab_start_tx(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 47c6837..68d262b 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -311,7 +311,7 @@
 static struct tty_struct *
 receive_chars(struct uart_sunsu_port *up, unsigned char *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, flag;
 	int max_count = 256;
 	int saw_console_brk = 0;
@@ -389,7 +389,7 @@
 
 static void transmit_chars(struct uart_sunsu_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -441,7 +441,7 @@
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index e09d3ce..ef693ae 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -328,9 +328,9 @@
 	unsigned char ch, r1, flag;
 
 	tty = NULL;
-	if (up->port.info != NULL &&		/* Unopened serial console */
-	    up->port.info->port.tty != NULL)	/* Keyboard || mouse */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&		/* Unopened serial console */
+	    up->port.state->port.tty != NULL)	/* Keyboard || mouse */
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 
@@ -451,7 +451,7 @@
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -501,9 +501,9 @@
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 
@@ -705,7 +705,7 @@
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 063a313..34b31da 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -77,7 +77,7 @@
 
 static void timbuart_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
@@ -86,7 +86,7 @@
 	}
 
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 
 	dev_dbg(port->dev, "%s - total read %d bytes\n",
@@ -95,7 +95,7 @@
 
 static void timbuart_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
 		!uart_circ_empty(xmit)) {
@@ -118,7 +118,7 @@
 {
 	struct timbuart_port *uart =
 		container_of(port, struct timbuart_port, port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
@@ -231,7 +231,7 @@
 		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 	}
 
 	*ier |= CTS_DELTA;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 3317148..377f271 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -75,7 +75,7 @@
 
 static int ulite_receive(struct uart_port *port, int stat)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch = 0;
 	char flag = TTY_NORMAL;
 
@@ -125,7 +125,7 @@
 
 static int ulite_transmit(struct uart_port *port, int stat)
 {
-	struct circ_buf *xmit  = &port->info->xmit;
+	struct circ_buf *xmit  = &port->state->xmit;
 
 	if (stat & ULITE_STATUS_TXFULL)
 		return 0;
@@ -154,17 +154,22 @@
 static irqreturn_t ulite_isr(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	int busy;
+	int busy, n = 0;
 
 	do {
 		int stat = readb(port->membase + ULITE_STATUS);
 		busy  = ulite_receive(port, stat);
 		busy |= ulite_transmit(port, stat);
+		n++;
 	} while (busy);
 
-	tty_flip_buffer_push(port->info->port.tty);
-
-	return IRQ_HANDLED;
+	/* work done? */
+	if (n > 1) {
+		tty_flip_buffer_push(port->state->port.tty);
+		return IRQ_HANDLED;
+	} else {
+		return IRQ_NONE;
+	}
 }
 
 static unsigned int ulite_tx_empty(struct uart_port *port)
@@ -221,7 +226,7 @@
 	int ret;
 
 	ret = request_irq(port->irq, ulite_isr,
-			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "uartlite", port);
+			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
 	if (ret)
 		return ret;
 
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index e945e78..0c08f28 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -327,7 +327,7 @@
 	unsigned char *p;
 	unsigned int count;
 	struct uart_port *port = &qe_port->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	bdp = qe_port->rx_cur;
 
@@ -466,7 +466,7 @@
 	int i;
 	unsigned char ch, *cp;
 	struct uart_port *port = &qe_port->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct qe_bd *bdp;
 	u16 status;
 	unsigned int flg;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index dac550e..3beb6ab 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -318,7 +318,7 @@
 	char flag;
 	int max_count = RX_MAX_COUNT;
 
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	lsr = *status;
 
 	do {
@@ -386,7 +386,7 @@
 	if (msr & UART_MSR_DCTS)
 		uart_handle_cts_change(port, msr & UART_MSR_CTS);
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static inline void transmit_chars(struct uart_port *port)
@@ -394,7 +394,7 @@
 	struct circ_buf *xmit;
 	int max_count = TX_MAX_COUNT;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		siu_write(port, UART_TX, port->x_char);
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index d8c2809..1a7fd3e 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -602,12 +602,12 @@
 		uart_insert_char(uport, status, Rx_OVR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void zs_raw_transmit_chars(struct zs_port *zport)
 {
-	struct circ_buf *xmit = &zport->port.info->xmit;
+	struct circ_buf *xmit = &zport->port.state->xmit;
 
 	/* XON/XOFF chars.  */
 	if (zport->port.x_char) {
@@ -686,7 +686,7 @@
 			uport->icount.rng++;
 
 		if (delta)
-			wake_up_interruptible(&uport->info->delta_msr_wait);
+			wake_up_interruptible(&uport->state->port.delta_msr_wait);
 
 		spin_lock(&scc->zlock);
 	}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2bfc41e..85a1a55 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -858,10 +858,7 @@
 	if (!ACM_READY(acm))
 		return;
 
-	/* FIXME: Needs to support the tty_baud interface */
-	/* FIXME: Broken on sparc */
-	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
-		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
+	newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index aec6188..5d25d3e 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -35,11 +35,6 @@
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-struct ark3116_private {
-	spinlock_t lock;
-	u8 termios_initialized;
-};
-
 static inline void ARK3116_SND(struct usb_serial *serial, int seq,
 			       __u8 request, __u8 requesttype,
 			       __u16 value, __u16 index)
@@ -82,22 +77,11 @@
 static int ark3116_attach(struct usb_serial *serial)
 {
 	char *buf;
-	struct ark3116_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
 
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc -> out of mem?");
-		goto cleanup;
+		return -ENOMEM;
 	}
 
 	/* 3 */
@@ -149,13 +133,16 @@
 
 	kfree(buf);
 	return 0;
+}
 
-cleanup:
-	for (--i; i >= 0; --i) {
-		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+static void ark3116_init_termios(struct tty_struct *tty)
+{
+	struct ktermios *termios = tty->termios;
+	*termios = tty_std_termios;
+	termios->c_cflag = B9600 | CS8
+				      | CREAD | HUPCL | CLOCAL;
+	termios->c_ispeed = 9600;
+	termios->c_ospeed = 9600;
 }
 
 static void ark3116_set_termios(struct tty_struct *tty,
@@ -163,10 +150,8 @@
 				struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
-	struct ark3116_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
-	unsigned long flags;
 	int baud;
 	int ark3116_baud;
 	char *buf;
@@ -176,16 +161,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*termios = tty_std_termios;
-		termios->c_cflag = B9600 | CS8
-					      | CREAD | HUPCL | CLOCAL;
-		termios->c_ispeed = 9600;
-		termios->c_ospeed = 9600;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	cflag = termios->c_cflag;
 	termios->c_cflag &= ~(CMSPAR|CRTSCTS);
@@ -318,8 +293,7 @@
 	return;
 }
 
-static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -334,7 +308,7 @@
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(tty, port, filp);
+	result = usb_serial_generic_open(tty, port);
 	if (result)
 		goto err_out;
 
@@ -455,6 +429,7 @@
 	.num_ports =		1,
 	.attach =		ark3116_attach,
 	.set_termios =		ark3116_set_termios,
+	.init_termios =		ark3116_init_termios,
 	.ioctl =		ark3116_ioctl,
 	.tiocmget =		ark3116_tiocmget,
 	.open =			ark3116_open,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 7033b03..a0467bc 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -92,7 +92,7 @@
 static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_release(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -213,7 +213,7 @@
 
 
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	int retval = 0;
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2830766..8c894a7 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -300,8 +300,7 @@
 
 
 /* open this device, set default parameters */
-static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -333,7 +332,7 @@
 		return -EPROTO;
 	}
 
-	r = usb_serial_generic_open(tty, port, filp);
+	r = usb_serial_generic_open(tty, port);
 
 out:	return r;
 }
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 0e4f2e4..b22ac32 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -63,7 +64,7 @@
 	char *s;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
-	int retval = 0;
+	int retval;
 	struct tty_struct *tty = NULL;
 	struct ktermios *termios = NULL, dummy;
 
@@ -116,13 +117,17 @@
 		return -ENODEV;
 	}
 
-	port = serial->port[0];
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto error_get_interface;
+
+	port = serial->port[co->index - serial->minor];
 	tty_port_tty_set(&port->port, NULL);
 
 	info->port = port;
 
 	++port->port.count;
-	if (port->port.count == 1) {
+	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
@@ -150,9 +155,9 @@
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(NULL, port, NULL);
+			retval = serial->type->open(NULL, port);
 		else
-			retval = usb_serial_generic_open(NULL, port, NULL);
+			retval = usb_serial_generic_open(NULL, port);
 
 		if (retval) {
 			err("could not open USB console port");
@@ -168,6 +173,7 @@
 			kfree(termios);
 			kfree(tty);
 		}
+		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
 	/* Now that any required fake tty operations are completed restore
 	 * the tty port count */
@@ -175,18 +181,22 @@
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
-	retval = 0;
 
-out:
+	mutex_unlock(&serial->disc_mutex);
 	return retval;
-free_termios:
+
+ free_termios:
 	kfree(termios);
 	tty_port_tty_set(&port->port, NULL);
-free_tty:
+ free_tty:
 	kfree(tty);
-reset_open_count:
+ reset_open_count:
 	port->port.count = 0;
-	goto out;
+	usb_autopm_put_interface(serial->interface);
+ error_get_interface:
+	usb_serial_put(serial);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
 }
 
 static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 985cbcf..4a208fe 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -33,8 +33,7 @@
 /*
  * Function Prototypes
  */
-static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
-							struct file *);
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
@@ -368,8 +367,7 @@
 	return baud;
 }
 
-static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -399,12 +397,6 @@
 
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-
-	/* Set the DTR and RTS pins low */
-	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
-			: port,
-		NULL, TIOCM_DTR | TIOCM_RTS, 0);
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 336523f..b0f6402 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,7 +61,7 @@
 static void cyberjack_disconnect(struct usb_serial *serial);
 static void cyberjack_release(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -173,7 +173,7 @@
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 59adfe1..e0a8b71 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -172,8 +172,7 @@
 static int  cypress_hidcom_startup(struct usb_serial *serial);
 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_release(struct usb_serial *serial);
-static int  cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -633,8 +632,7 @@
 }
 
 
-static int cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -659,15 +657,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Set termios */
-	result = cypress_write(tty, port, NULL, 0);
-
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed setting the control lines - error %d\n",
-							__func__, result);
-		return result;
-	} else
-		dbg("%s - success setting the control lines", __func__);
+	cypress_send(port);
 
 	if (tty)
 		cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1005,6 +995,8 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
+	/* We can't clean this one up as we don't know the device type
+	   early enough */
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
 			*(tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index f480809..ab3dd99 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -453,8 +453,7 @@
 static void digi_write_bulk_callback(struct urb *urb);
 static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
 static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
@@ -1347,8 +1346,7 @@
 	return 0;
 }
 
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
 	unsigned char buf[32];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 80cb347..33c9e9c 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -79,8 +79,7 @@
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
@@ -90,8 +89,7 @@
 static void empeg_throttle(struct tty_struct *tty);
 static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
 static void empeg_write_bulk_callback(struct urb *urb);
 static void empeg_read_bulk_callback(struct urb *urb);
 
@@ -123,7 +121,7 @@
 	.throttle =		empeg_throttle,
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
-	.set_termios =		empeg_set_termios,
+	.init_termios =		empeg_init_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
 	.chars_in_buffer =	empeg_chars_in_buffer,
@@ -142,17 +140,13 @@
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* Force default termio settings */
-	empeg_set_termios(tty, port, NULL) ;
-
 	bytes_in = 0;
 	bytes_out = 0;
 
@@ -425,11 +419,9 @@
 }
 
 
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
-	dbg("%s - port %d", __func__, port->number);
 
 	/*
 	 * The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fec5d4..76a17f9 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -747,8 +747,7 @@
 					const struct usb_device_id *id);
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
-static int  ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -1680,8 +1679,7 @@
 	return 0;
 }
 
-static int ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 8839f1c..20432d3 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -933,8 +933,7 @@
 
 
 
-static int garmin_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	unsigned long flags;
 	int status = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index ce57f6a..d9398e9 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -114,8 +114,7 @@
 #endif
 }
 
-int usb_serial_generic_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0191693..dc0f832 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -205,8 +205,7 @@
 static void edge_bulk_out_cmd_callback(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -852,8 +851,7 @@
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index e8bc42f..d4cc0f7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1831,8 +1831,7 @@
 	tty_kref_put(tty);
 }
 
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 2545d45..24fcc64 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -75,7 +75,7 @@
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
@@ -587,7 +587,7 @@
 static int		bytes_out;
 
 static int ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -628,11 +628,6 @@
 		priv->free_len += PACKET_SIZE;
 	}
 
-	if (tty) {
-		/* FIXME: These two are bogus */
-		tty->raw = 1;
-		tty->real_raw = 1;
-	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 29ad038..727d323 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -193,8 +193,7 @@
 	return;
 }
 
-static int ipw_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 66009b6..95d8d26 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -86,8 +86,7 @@
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -296,8 +295,7 @@
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	char *buffer;
 	int result = 0;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 96873a7..6138c1c 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -71,7 +71,6 @@
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
 	u8 line_status;
-	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
 	u8 reset;		/* if 1 reset is needed */
 	int poll;		/* number of poll */
@@ -1018,14 +1017,24 @@
 	}
 }
 
-static int iuu_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void iuu_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+				| TIOCM_CTS | CSTOPB | PARENB;
+	tty->termios->c_ispeed = 9600;
+	tty->termios->c_ospeed = 9600;
+	tty->termios->c_lflag = 0;
+	tty->termios->c_oflag = 0;
+	tty->termios->c_iflag = 0;
+}
+
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
 	int result;
 	u32 actual;
-	unsigned long flags;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s -  port %d", __func__, port->number);
@@ -1064,21 +1073,7 @@
 			  port->bulk_in_buffer, 512,
 			  NULL, NULL);
 
-	/* set the termios structure */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && !priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
-					| TIOCM_CTS | CSTOPB | PARENB;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		tty->termios->c_lflag = 0;
-		tty->termios->c_oflag = 0;
-		tty->termios->c_iflag = 0;
-		priv->termios_initialized = 1;
-		priv->poll = 0;
-	 }
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->poll = 0;
 
 	/* initialize writebuf */
 #define FISH(a, b, c, d) do { \
@@ -1201,6 +1196,7 @@
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
+	.init_termios = iuu_init_termios,
 	.attach = iuu_startup,
 	.release = iuu_release,
 };
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 2594b87..f8c4b07 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1209,8 +1209,7 @@
 }
 
 
-static int keyspan_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 3107ed1..30771e5 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -36,8 +36,7 @@
 
 /* Function prototypes for Keyspan serial converter */
 static int  keyspan_open		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+					 struct usb_serial_port *port);
 static void keyspan_close		(struct usb_serial_port *port);
 static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index d0b12e4..257c16c 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -681,7 +681,7 @@
 
 
 static int keyspan_pda_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0f44bb8..a616731 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -75,8 +75,7 @@
 static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -358,8 +357,7 @@
 	}
 } /* klsi_105_release */
 
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -371,10 +369,6 @@
 
 	dbg("%s port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through
-	 * tty->low_latency = 1; */
-
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
 	 * vendor command.
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6db0e56..45ea694 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -70,8 +70,7 @@
 /* Function prototypes */
 static int  kobil_startup(struct usb_serial *serial);
 static void kobil_release(struct usb_serial *serial);
-static int  kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
@@ -85,7 +84,7 @@
 static void kobil_write_callback(struct urb *purb);
 static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -120,6 +119,7 @@
 	.release =		kobil_release,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
+	.init_termios =		kobil_init_termios,
 	.tiocmget =		kobil_tiocmget,
 	.tiocmset =		kobil_tiocmset,
 	.open =			kobil_open,
@@ -210,9 +210,17 @@
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
+static void kobil_init_termios(struct tty_struct *tty)
+{
+	/* Default to echo off and other sane device settings */
+	tty->termios->c_lflag = 0;
+	tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+	tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+	/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+	tty->termios->c_oflag &= ~ONLCR;
+}
 
-static int kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 	struct kobil_private *priv;
@@ -226,16 +234,6 @@
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-	if (tty) {
-
-		/* Default to echo off and other sane device settings */
-		tty->termios->c_lflag = 0;
-		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
-								 XCASE);
-		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-		/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
-		tty->termios->c_oflag &= ~ONLCR;
-	}
 	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (!transfer_buffer)
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d8825e1..ad4998b 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -93,8 +93,7 @@
  */
 static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_release(struct usb_serial *serial);
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void mct_u232_close(struct usb_serial_port *port);
 static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
@@ -421,8 +420,7 @@
 	}
 } /* mct_u232_release */
 
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -568,10 +566,13 @@
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
 	 */
 	if (urb->transfer_buffer_length > 2) {
-		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
+			tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			}
 			tty_kref_put(tty);
 		}
 		goto exit;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index ccd4dd3..763e32a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -85,7 +85,7 @@
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static struct usb_device_id moschip_port_id_table [] = {
+static struct usb_device_id moschip_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
 	{ } /* terminating entry */
 };
@@ -319,8 +319,7 @@
 	return status;
 }
 
-static int mos7720_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
@@ -378,10 +377,14 @@
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
+	  * 0 : THR/RHR
 	  * 1 : IER
 	  * 2 : FCR
 	  * 3 : LCR
 	  * 4 : MCR
+	  * 5 : LSR
+	  * 6 : MSR
+	  * 7 : SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
@@ -1250,20 +1253,88 @@
 static int get_lsr_info(struct tty_struct *tty,
 		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
-	int count;
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->number - port->serial->minor;
+	int count;
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
+		send_mos_cmd(port->serial, MOS_READ, port_number,
+							UART_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dbg("%s -- Empty", __func__);
+			result = TIOCSER_TEMT;
+		}
 	}
-
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
 	return 0;
 }
 
+static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int mcr ;
+	unsigned int msr ;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	mcr = mos7720_port->shadowMCR;
+	msr = mos7720_port->shadowMSR;
+
+	result = ((mcr & UART_MCR_DTR)  ? TIOCM_DTR : 0)   /* 0x002 */
+	  | ((mcr & UART_MCR_RTS)   ? TIOCM_RTS : 0)   /* 0x004 */
+	  | ((msr & UART_MSR_CTS)   ? TIOCM_CTS : 0)   /* 0x020 */
+	  | ((msr & UART_MSR_DCD)   ? TIOCM_CAR : 0)   /* 0x040 */
+	  | ((msr & UART_MSR_RI)    ? TIOCM_RI :  0)   /* 0x080 */
+	  | ((msr & UART_MSR_DSR)   ? TIOCM_DSR : 0);  /* 0x100 */
+
+	dbg("%s -- %x", __func__, result);
+
+	return result;
+}
+
+static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int mcr ;
+	unsigned char lmcr;
+
+	dbg("%s - port %d", __func__, port->number);
+	dbg("he was at tiocmget");
+
+	mcr = mos7720_port->shadowMCR;
+
+	if (set & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~UART_MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~UART_MCR_LOOP;
+
+	mos7720_port->shadowMCR = mcr;
+	lmcr = mos7720_port->shadowMCR;
+
+	send_mos_cmd(port->serial, MOS_WRITE,
+		port->number - port->serial->minor, UART_MCR, &lmcr);
+
+	return 0;
+}
+
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1301,14 +1372,6 @@
 			mcr &= ~UART_MCR_LOOP;
 		break;
 
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &=  ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP);
-		mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0);
-		break;
 	}
 
 	mos7720_port->shadowMCR = mcr;
@@ -1320,28 +1383,6 @@
 	return 0;
 }
 
-static int get_modem_info(struct moschip_port *mos7720_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	unsigned int msr = mos7720_port->shadowMSR;
-	unsigned int mcr = mos7720_port->shadowMCR;
-
-	result = ((mcr & UART_MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
-		  | ((mcr & UART_MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
-		  | ((msr & UART_MSR_CTS)	? TIOCM_CTS: 0)   /* 0x020 */
-		  | ((msr & UART_MSR_DCD)	? TIOCM_CAR: 0)   /* 0x040 */
-		  | ((msr & UART_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
-		  | ((msr & UART_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
-
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
 static int get_serial_info(struct moschip_port *mos7720_port,
 			   struct serial_struct __user *retinfo)
 {
@@ -1392,17 +1433,11 @@
 	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
-	case TIOCMSET:
 		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
 					__func__, port->number);
 		return set_modem_info(mos7720_port, cmd,
 				      (unsigned int __user *)arg);
 
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__,  port->number);
-		return get_modem_info(mos7720_port,
-				      (unsigned int __user *)arg);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
 		return get_serial_info(mos7720_port,
@@ -1557,6 +1592,8 @@
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
+	.tiocmget		= mos7720_tiocmget,
+	.tiocmset		= mos7720_tiocmset,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
 	.write_room		= mos7720_write_room,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 270009a..f11abf5 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -824,8 +824,7 @@
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int response;
 	int j;
@@ -2134,106 +2133,6 @@
 }
 
 /*****************************************************************************
- * mos7840_set_modem_info
- *      function to set modem info
- *****************************************************************************/
-
-/* FIXME: Should be using the model control hooks */
-
-static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int cmd, unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (mos7840_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)mos7840_port->port;
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
-		return -1;
-	}
-
-	mcr = mos7840_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	lock_kernel();
-	mos7840_port->shadowMCR = mcr;
-
-	Data = mos7840_port->shadowMCR;
-	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	unlock_kernel();
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*****************************************************************************
- * mos7840_get_modem_info
- *      function to get modem info
- *****************************************************************************/
-
-static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = mos7840_port->shadowMCR;
-        mos7840_get_uart_reg(mos7840_port->port,
-						MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************
  * mos7840_get_serial_info
  *      function to get information about serial port
  *****************************************************************************/
@@ -2281,7 +2180,6 @@
 	struct async_icount cnow;
 	struct async_icount cprev;
 	struct serial_icounter_struct icount;
-	int mosret = 0;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
@@ -2303,20 +2201,6 @@
 		return mos7840_get_lsr_info(tty, argp);
 		return 0;
 
-	/* FIXME: use the modem hooks and remove this */
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		mosret =
-		    mos7840_set_modem_info(mos7840_port, cmd, argp);
-		return mosret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return mos7840_get_modem_info(mos7840_port, argp);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
 		return mos7840_get_serial_info(mos7840_port, argp);
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index f5f3751a8..5ceaa4c 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -80,8 +80,7 @@
 			__func__, result);
 }
 
-static int navman_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 56857dd..0622650 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -64,8 +64,7 @@
 #define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
@@ -163,8 +162,7 @@
 	return 0;
 }
 
-static int omninet_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 336bba7..1085a57 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -144,8 +144,7 @@
 	spin_unlock(&priv->lock);
 }
 
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c784ddb..fe47051 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void option_close(struct usb_serial_port *port);
 static void option_dtr_rts(struct usb_serial_port *port, int on);
 
@@ -961,8 +960,7 @@
 	return data_len;
 }
 
-static int option_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct option_port_private *portdata;
 	int i, err;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 3cece27..0f4a70ce 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -141,11 +141,11 @@
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 
 /* function prototypes */
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
@@ -186,6 +186,7 @@
 	.write =		oti6858_write,
 	.ioctl =		oti6858_ioctl,
 	.set_termios =		oti6858_set_termios,
+	.init_termios = 	oti6858_init_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
 	.read_bulk_callback =	oti6858_read_bulk_callback,
@@ -206,7 +207,6 @@
 	struct {
 		u8 read_urb_in_use;
 		u8 write_urb_in_use;
-		u8 termios_initialized;
 	} flags;
 	struct delayed_work delayed_write_work;
 
@@ -447,6 +447,14 @@
 	return chars;
 }
 
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 38400;
+	tty->termios->c_ospeed = 38400;
+}
+
 static void oti6858_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -464,16 +472,6 @@
 		return;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->flags.termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 38400;
-		tty->termios->c_ospeed = 38400;
-		priv->flags.termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	cflag = tty->termios->c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -566,8 +564,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3e86815..a63ea99 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -691,8 +691,7 @@
 
 }
 
-static int pl2303_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -714,8 +713,6 @@
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f48d05e..55391bb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -734,8 +734,7 @@
 	}
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 3c249d8..61e7c40 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -299,7 +299,6 @@
 	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
 	u8 			line_status;
-	u8 			termios_initialized;
 };
 
 /* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@
 		dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
 }
 
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	/* for the 1st time call this function */
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 115200;
+	tty->termios->c_ospeed = 115200;
+}
+
 /* set the serial param for transfer. we should check if we really need to
  * transfer. if we set flow control we should do this too. */
 static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@
 	int i;
 	u8 control;
 
-	/* for the 1st time call this function */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 115200;
-		tty->termios->c_ospeed = 115200;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* check that they really want us to change something */
 	if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -623,8 +621,7 @@
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -658,8 +655,6 @@
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -1011,6 +1006,7 @@
 	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 6157fac..cb7e95f 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -124,8 +124,7 @@
 	spin_unlock(&priv->lock);
 }
 
-static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3bc609f..1e9dc88 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -98,8 +98,7 @@
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
-static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
@@ -492,8 +491,7 @@
 }
 
 
-static int ti_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 99188c9..9d7ca48 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -43,8 +43,6 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
-static void port_free(struct usb_serial_port *port);
-
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
 	.name =		"usbserial",
@@ -68,6 +66,11 @@
 static DEFINE_MUTEX(table_lock);
 static LIST_HEAD(usb_serial_driver_list);
 
+/*
+ * Look up the serial structure.  If it is found and it hasn't been
+ * disconnected, return with its disc_mutex held and its refcount
+ * incremented.  Otherwise return NULL.
+ */
 struct usb_serial *usb_serial_get_by_index(unsigned index)
 {
 	struct usb_serial *serial;
@@ -75,8 +78,15 @@
 	mutex_lock(&table_lock);
 	serial = serial_table[index];
 
-	if (serial)
-		kref_get(&serial->kref);
+	if (serial) {
+		mutex_lock(&serial->disc_mutex);
+		if (serial->disconnected) {
+			mutex_unlock(&serial->disc_mutex);
+			serial = NULL;
+		} else {
+			kref_get(&serial->kref);
+		}
+	}
 	mutex_unlock(&table_lock);
 	return serial;
 }
@@ -125,8 +135,10 @@
 
 	dbg("%s", __func__);
 
+	mutex_lock(&table_lock);
 	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
+	mutex_unlock(&table_lock);
 }
 
 static void destroy_serial(struct kref *kref)
@@ -145,161 +157,157 @@
 
 	serial->type->release(serial);
 
-	for (i = 0; i < serial->num_ports; ++i) {
+	/* Now that nothing is using the ports, they can be freed */
+	for (i = 0; i < serial->num_port_pointers; ++i) {
 		port = serial->port[i];
-		if (port)
+		if (port) {
+			port->serial = NULL;
 			put_device(&port->dev);
-	}
-
-	/* If this is a "fake" port, we have to clean it up here, as it will
-	 * not get cleaned up in port_release() as it was never registered with
-	 * the driver core */
-	if (serial->num_ports < serial->num_port_pointers) {
-		for (i = serial->num_ports;
-					i < serial->num_port_pointers; ++i) {
-			port = serial->port[i];
-			if (port)
-				port_free(port);
 		}
 	}
 
 	usb_put_dev(serial->dev);
-
-	/* free up any memory that we allocated */
 	kfree(serial);
 }
 
 void usb_serial_put(struct usb_serial *serial)
 {
-	mutex_lock(&table_lock);
 	kref_put(&serial->kref, destroy_serial);
-	mutex_unlock(&table_lock);
 }
 
 /*****************************************************************************
  * Driver tty interface functions
  *****************************************************************************/
-static int serial_open (struct tty_struct *tty, struct file *filp)
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty.  We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ *
+ * This is the first place a new tty gets used.  Hence this is where we
+ * acquire references to the usb_serial structure and the driver module,
+ * where we store a pointer to the port, and where we do an autoresume.
+ * All these actions are reversed in serial_release().
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 {
+	int idx = tty->index;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
-	unsigned int portNumber;
-	int retval = 0;
-	int first = 0;
+	int retval = -ENODEV;
 
 	dbg("%s", __func__);
 
-	/* get the serial object associated with this tty pointer */
-	serial = usb_serial_get_by_index(tty->index);
-	if (!serial) {
-		tty->driver_data = NULL;
-		return -ENODEV;
-	}
+	serial = usb_serial_get_by_index(idx);
+	if (!serial)
+		return retval;
 
-	mutex_lock(&serial->disc_mutex);
-	portNumber = tty->index - serial->minor;
-	port = serial->port[portNumber];
-	if (!port || serial->disconnected)
-		retval = -ENODEV;
-	else
-		get_device(&port->dev);
-	/*
-	 * Note: Our locking order requirement does not allow port->mutex
-	 * to be acquired while serial->disc_mutex is held.
-	 */
-	mutex_unlock(&serial->disc_mutex);
+	port = serial->port[idx - serial->minor];
+	if (!port)
+		goto error_no_port;
+	if (!try_module_get(serial->type->driver.owner))
+		goto error_module_get;
+
+	/* perform the standard setup */
+	retval = tty_init_termios(tty);
 	if (retval)
-		goto bailout_serial_put;
+		goto error_init_termios;
 
-	if (mutex_lock_interruptible(&port->mutex)) {
-		retval = -ERESTARTSYS;
-		goto bailout_port_put;
-	}
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto error_get_interface;
 
-	++port->port.count;
+	mutex_unlock(&serial->disc_mutex);
 
-	/* set up our port structure making the tty driver
-	 * remember our port object, and us it */
+	/* allow the driver to update the settings */
+	if (serial->type->init_termios)
+		serial->type->init_termios(tty);
+
 	tty->driver_data = port;
+
+	/* Final install (we use the default method) */
+	tty_driver_kref_get(driver);
+	tty->count++;
+	driver->ttys[idx] = tty;
+	return retval;
+
+ error_get_interface:
+ error_init_termios:
+	module_put(serial->type->driver.owner);
+ error_module_get:
+ error_no_port:
+	usb_serial_put(serial);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
+}
+
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	int retval;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irq(&port->port.lock);
+	if (!tty_hung_up_p(filp))
+		++port->port.count;
+	spin_unlock_irq(&port->port.lock);
 	tty_port_tty_set(&port->port, tty);
 
-	/* If the console is attached, the device is already open */
-	if (port->port.count == 1 && !port->console) {
-		first = 1;
-		/* lock this module before we call it
-		 * this may fail, which means we must bail out,
-		 * safe because we are called with BKL held */
-		if (!try_module_get(serial->type->driver.owner)) {
-			retval = -ENODEV;
-			goto bailout_mutex_unlock;
-		}
-
+	/* Do the device-specific open only if the hardware isn't
+	 * already initialized.
+	 */
+	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+		if (mutex_lock_interruptible(&port->mutex))
+			return -ERESTARTSYS;
 		mutex_lock(&serial->disc_mutex);
 		if (serial->disconnected)
 			retval = -ENODEV;
 		else
-			retval = usb_autopm_get_interface(serial->interface);
-		if (retval)
-			goto bailout_module_put;
-
-		/* only call the device specific open if this
-		 * is the first time the port is opened */
-		retval = serial->type->open(tty, port, filp);
-		if (retval)
-			goto bailout_interface_put;
+			retval = port->serial->type->open(tty, port);
 		mutex_unlock(&serial->disc_mutex);
+		mutex_unlock(&port->mutex);
+		if (retval)
+			return retval;
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
-	mutex_unlock(&port->mutex);
+
 	/* Now do the correct tty layer semantics */
 	retval = tty_port_block_til_ready(&port->port, tty, filp);
-	if (retval == 0) {
-		if (!first)
-			usb_serial_put(serial);
-		return 0;
-	}
-	mutex_lock(&port->mutex);
-	if (first == 0)
-		goto bailout_mutex_unlock;
-	/* Undo the initial port actions */
-	mutex_lock(&serial->disc_mutex);
-bailout_interface_put:
-	usb_autopm_put_interface(serial->interface);
-bailout_module_put:
-	mutex_unlock(&serial->disc_mutex);
-	module_put(serial->type->driver.owner);
-bailout_mutex_unlock:
-	port->port.count = 0;
-	tty->driver_data = NULL;
-	tty_port_tty_set(&port->port, NULL);
-	mutex_unlock(&port->mutex);
-bailout_port_put:
-	put_device(&port->dev);
-bailout_serial_put:
-	usb_serial_put(serial);
 	return retval;
 }
 
 /**
- *	serial_do_down		-	shut down hardware
- *	@port: port to shut down
+ * serial_down - shut down hardware
+ * @port: port to shut down
  *
- *	Shut down a USB port unless it is the console. We never shut down the
- *	console hardware as it will always be in use.
- *
- *	Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console.  We never
+ * shut down the console hardware as it will always be in use.
  */
-static void serial_do_down(struct usb_serial_port *port)
+static void serial_down(struct usb_serial_port *port)
 {
 	struct usb_serial_driver *drv = port->serial->type;
 	struct usb_serial *serial;
 	struct module *owner;
 
-	/* The console is magical, do not hang up the console hardware
-	   or there will be tears */
+	/*
+	 * The console is magical.  Do not hang up the console hardware
+	 * or there will be tears.
+	 */
 	if (port->console)
 		return;
 
+	/* Don't call the close method if the hardware hasn't been
+	 * initialized.
+	 */
+	if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		return;
+
 	mutex_lock(&port->mutex);
 	serial = port->serial;
 	owner = serial->type->driver.owner;
@@ -310,79 +318,69 @@
 	mutex_unlock(&port->mutex);
 }
 
-/**
- *	serial_do_free		-	free resources post close/hangup
- *	@port: port to free up
- *
- *	Do the resource freeing and refcount dropping for the port. We must
- *	be careful about ordering and we must avoid freeing up the console.
- */
-
-static void serial_do_free(struct usb_serial_port *port)
+static void serial_hangup(struct tty_struct *tty)
 {
-	struct usb_serial *serial;
-	struct module *owner;
+	struct usb_serial_port *port = tty->driver_data;
 
-	/* The console is magical, do not hang up the console hardware
-	   or there will be tears */
-	if (port->console)
-		return;
+	dbg("%s - port %d", __func__, port->number);
 
-	serial = port->serial;
-	owner = serial->type->driver.owner;
-	put_device(&port->dev);
-	/* Mustn't dereference port any more */
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		usb_autopm_put_interface(serial->interface);
-	mutex_unlock(&serial->disc_mutex);
-	usb_serial_put(serial);
-	/* Mustn't dereference serial any more */
-	module_put(owner);
+	serial_down(port);
+	tty_port_hangup(&port->port);
 }
 
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	if (!port)
+	dbg("%s - port %d", __func__, port->number);
+
+	if (tty_hung_up_p(filp))
+		return;
+	if (tty_port_close_start(&port->port, tty, filp) == 0)
+		return;
+	serial_down(port);
+	tty_port_close_end(&port->port, tty);
+	tty_port_tty_set(&port->port, NULL);
+}
+
+/**
+ * serial_release - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
+ *
+ * Called when the last tty kref is dropped.
+ */
+static void serial_release(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	struct module *owner;
+
+	/* The console is magical.  Do not hang up the console hardware
+	 * or there will be tears.
+	 */
+	if (port->console)
 		return;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* FIXME:
-	   This leaves a very narrow race. Really we should do the
-	   serial_do_free() on tty->shutdown(), but tty->shutdown can
-	   be called from IRQ context and serial_do_free can sleep.
+	/* Standard shutdown processing */
+	tty_shutdown(tty);
 
-	   The right fix is probably to make the tty free (which is rare)
-	   and thus tty->shutdown() occur via a work queue and simplify all
-	   the drivers that use it.
-	*/
-	if (tty_hung_up_p(filp)) {
-		/* serial_hangup already called serial_down at this point.
-		   Another user may have already reopened the port but
-		   serial_do_free is refcounted */
-		serial_do_free(port);
-		return;
-	}
+	tty->driver_data = NULL;
 
-	if (tty_port_close_start(&port->port, tty, filp) == 0)
-		return;
+	serial = port->serial;
+	owner = serial->type->driver.owner;
 
-	serial_do_down(port);		
-	tty_port_close_end(&port->port, tty);
-	tty_port_tty_set(&port->port, NULL);
-	serial_do_free(port);
-}
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		usb_autopm_put_interface(serial->interface);
+	mutex_unlock(&serial->disc_mutex);
 
-static void serial_hangup(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	serial_do_down(port);
-	tty_port_hangup(&port->port);
-	/* We must not free port yet - the USB serial layer depends on it's
-	   continued existence */
+	usb_serial_put(serial);
+	module_put(owner);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -527,6 +525,7 @@
 
 		seq_putc(m, '\n');
 		usb_serial_put(serial);
+		mutex_unlock(&serial->disc_mutex);
 	}
 	return 0;
 }
@@ -596,14 +595,6 @@
 	tty_kref_put(tty);
 }
 
-static void port_release(struct device *dev)
-{
-	struct usb_serial_port *port = to_usb_serial_port(dev);
-
-	dbg ("%s - %s", __func__, dev_name(dev));
-	port_free(port);
-}
-
 static void kill_traffic(struct usb_serial_port *port)
 {
 	usb_kill_urb(port->read_urb);
@@ -623,8 +614,12 @@
 	usb_kill_urb(port->interrupt_out_urb);
 }
 
-static void port_free(struct usb_serial_port *port)
+static void port_release(struct device *dev)
 {
+	struct usb_serial_port *port = to_usb_serial_port(dev);
+
+	dbg ("%s - %s", __func__, dev_name(dev));
+
 	/*
 	 * Stop all the traffic before cancelling the work, so that
 	 * nobody will restart it by calling usb_serial_port_softint.
@@ -935,6 +930,11 @@
 		mutex_init(&port->mutex);
 		INIT_WORK(&port->work, usb_serial_port_work);
 		serial->port[i] = port;
+		port->dev.parent = &interface->dev;
+		port->dev.driver = NULL;
+		port->dev.bus = &usb_serial_bus_type;
+		port->dev.release = &port_release;
+		device_initialize(&port->dev);
 	}
 
 	/* set up the endpoint information */
@@ -1077,15 +1077,10 @@
 	/* register all of the individual ports with the driver core */
 	for (i = 0; i < num_ports; ++i) {
 		port = serial->port[i];
-		port->dev.parent = &interface->dev;
-		port->dev.driver = NULL;
-		port->dev.bus = &usb_serial_bus_type;
-		port->dev.release = &port_release;
-
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
 		port->dev_state = PORT_REGISTERING;
-		retval = device_register(&port->dev);
+		retval = device_add(&port->dev);
 		if (retval) {
 			dev_err(&port->dev, "Error registering port device, "
 				"continuing\n");
@@ -1103,39 +1098,7 @@
 	return 0;
 
 probe_error:
-	for (i = 0; i < num_bulk_in; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->read_urb);
-		kfree(port->bulk_in_buffer);
-	}
-	for (i = 0; i < num_bulk_out; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->write_urb);
-		kfree(port->bulk_out_buffer);
-	}
-	for (i = 0; i < num_interrupt_in; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->interrupt_in_urb);
-		kfree(port->interrupt_in_buffer);
-	}
-	for (i = 0; i < num_interrupt_out; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		usb_free_urb(port->interrupt_out_urb);
-		kfree(port->interrupt_out_buffer);
-	}
-
-	/* free up any memory that we allocated */
-	for (i = 0; i < serial->num_port_pointers; ++i)
-		kfree(serial->port[i]);
-	kfree(serial);
+	usb_serial_put(serial);
 	return -EIO;
 }
 EXPORT_SYMBOL_GPL(usb_serial_probe);
@@ -1161,10 +1124,7 @@
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
-				/* The hangup will occur asynchronously but
-				   the object refcounts will sort out all the
-				   cleanup */
-				tty_hangup(tty);
+				tty_vhangup(tty);
 				tty_kref_put(tty);
 			}
 			kill_traffic(port);
@@ -1189,8 +1149,7 @@
 	}
 	serial->type->disconnect(serial);
 
-	/* let the last holder of this object
-	 * cause it to be cleaned up */
+	/* let the last holder of this object cause it to be cleaned up */
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
@@ -1246,6 +1205,8 @@
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.shutdown = 		serial_release,
+	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
 
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 6148009..7b5bfc4 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -43,11 +43,10 @@
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port, filp);
+	return usb_serial_generic_open(tty, port);
 }
 
 /* This HW really does not support a serial break, so one will be
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index f5d0f64..1aa5d20 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -36,8 +36,7 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -273,8 +272,7 @@
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 8d126dd..62424ee 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -146,7 +146,7 @@
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
@@ -259,7 +259,7 @@
 						__u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -659,8 +659,7 @@
 	return;
 }
 
-static int whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int		retval = 0;
 
@@ -1211,7 +1210,7 @@
 }
 
 
-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
@@ -1286,7 +1285,7 @@
 	port_settings.lloop = 0;
 
 	/* now send the message to the device */
-	return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+	firm_send_command(port, WHITEHEAT_SETUP_PORT,
 			(__u8 *)&port_settings, sizeof(port_settings));
 }
 
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 1fbdea4..a5049ea 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -499,6 +499,7 @@
 		void __iomem *p9050;
 		struct RUNTIME_9060 __iomem *p9060;
 	} ctl_addr;
+	struct BOARD_CTRL __iomem *board_ctrl;	/* cyz specific */
 	int irq;
 	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
 	unsigned int first_line;	/* minor number of first channel on card */
@@ -541,6 +542,15 @@
 	int                     magic;
 	struct tty_port		port;
 	struct cyclades_card	*card;
+	union {
+		struct {
+			void __iomem *base_addr;
+		} cyy;
+		struct {
+			struct CH_CTRL __iomem	*ch_ctrl;
+			struct BUF_CTRL __iomem	*buf_ctrl;
+		} cyz;
+	} u;
 	int			line;
 	int			flags; 		/* defined in tty.h */
 	int                     type;		/* UART type */
@@ -568,7 +578,6 @@
 	struct cyclades_idle_stats	idle_stats;
 	struct cyclades_icount	icount;
 	struct completion       shutdown_wait;
-	wait_queue_head_t       delta_msr_wait;
 	int throttle;
 };
 
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
index 940aeb5..92b08cf 100644
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -96,7 +96,6 @@
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
-	wait_queue_head_t	delta_msr_wait;
 	wait_queue_head_t	break_wait;
 	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
 	struct hayes_esp_config config; /* port configuration */
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 29f62e1..ad6bdf5 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -38,7 +38,7 @@
 				 spinlock_t *lock);
 extern void kfifo_free(struct kfifo *fifo);
 extern unsigned int __kfifo_put(struct kfifo *fifo,
-				unsigned char *buffer, unsigned int len);
+				const unsigned char *buffer, unsigned int len);
 extern unsigned int __kfifo_get(struct kfifo *fifo,
 				unsigned char *buffer, unsigned int len);
 
@@ -77,7 +77,7 @@
  * bytes copied.
  */
 static inline unsigned int kfifo_put(struct kfifo *fifo,
-				     unsigned char *buffer, unsigned int len)
+				const unsigned char *buffer, unsigned int len)
 {
 	unsigned long flags;
 	unsigned int ret;
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 972f90d..bd34100 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -199,10 +199,14 @@
 				inherit_stat   :  1, /* per task counts       */
 				enable_on_exec :  1, /* next exec enables     */
 				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
 
-				__reserved_1   : 50;
+				__reserved_1   : 49;
 
-	__u32			wakeup_events;	/* wakeup every n events */
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
 	__u32			__reserved_2;
 
 	__u64			__reserved_3;
@@ -332,6 +336,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
+	 *	u64				time;
 	 * };
 	 */
 	PERF_EVENT_EXIT			= 4,
@@ -352,6 +357,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
+	 *	{ u64				time;     } && PERF_SAMPLE_TIME
 	 * };
 	 */
 	PERF_EVENT_FORK			= 7,
@@ -521,6 +527,8 @@
 	atomic_t			wakeup;		/* needs a wakeup    */
 	atomic_t			lost;		/* nr records lost   */
 
+	long				watermark;	/* wakeup watermark  */
+
 	struct perf_counter_mmap_page   *user_page;
 	void				*data_pages[0];
 };
@@ -685,6 +693,17 @@
 	int				recursion[4];
 };
 
+struct perf_output_handle {
+	struct perf_counter	*counter;
+	struct perf_mmap_data	*data;
+	unsigned long		head;
+	unsigned long		offset;
+	int			nmi;
+	int			sample;
+	int			locked;
+	unsigned long		flags;
+};
+
 #ifdef CONFIG_PERF_COUNTERS
 
 /*
@@ -716,16 +735,38 @@
 extern void perf_counter_update_userpage(struct perf_counter *counter);
 
 struct perf_sample_data {
-	struct pt_regs			*regs;
+	u64				type;
+
+	u64				ip;
+	struct {
+		u32	pid;
+		u32	tid;
+	}				tid_entry;
+	u64				time;
 	u64				addr;
+	u64				id;
+	u64				stream_id;
+	struct {
+		u32	cpu;
+		u32	reserved;
+	}				cpu_entry;
 	u64				period;
+	struct perf_callchain_entry	*callchain;
 	struct perf_raw_record		*raw;
 };
 
+extern void perf_output_sample(struct perf_output_handle *handle,
+			       struct perf_event_header *header,
+			       struct perf_sample_data *data,
+			       struct perf_counter *counter);
+extern void perf_prepare_sample(struct perf_event_header *header,
+				struct perf_sample_data *data,
+				struct perf_counter *counter,
+				struct pt_regs *regs);
+
 extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
-				 struct perf_sample_data *data);
-extern void perf_counter_output(struct perf_counter *counter, int nmi,
-				struct perf_sample_data *data);
+				 struct perf_sample_data *data,
+				 struct pt_regs *regs);
 
 /*
  * Return 1 for a software counter, 0 for a hardware counter
@@ -775,6 +816,12 @@
 #define perf_instruction_pointer(regs)	instruction_pointer(regs)
 #endif
 
+extern int perf_output_begin(struct perf_output_handle *handle,
+			     struct perf_counter *counter, unsigned int size,
+			     int nmi, int sample);
+extern void perf_output_end(struct perf_output_handle *handle);
+extern void perf_output_copy(struct perf_output_handle *handle,
+			     const void *buf, unsigned int len);
 #else
 static inline void
 perf_counter_task_sched_in(struct task_struct *task, int cpu)		{ }
@@ -801,7 +848,28 @@
 static inline void perf_counter_comm(struct task_struct *tsk)		{ }
 static inline void perf_counter_fork(struct task_struct *tsk)		{ }
 static inline void perf_counter_init(void)				{ }
+
+static inline int
+perf_output_begin(struct perf_output_handle *handle, struct perf_counter *c,
+		  unsigned int size, int nmi, int sample)		{ }
+static inline void perf_output_end(struct perf_output_handle *handle)	{ }
+static inline void
+perf_output_copy(struct perf_output_handle *handle,
+		 const void *buf, unsigned int len)			{ }
+static inline void
+perf_output_sample(struct perf_output_handle *handle,
+		   struct perf_event_header *header,
+		   struct perf_sample_data *data,
+		   struct perf_counter *counter)			{ }
+static inline void
+perf_prepare_sample(struct perf_event_header *header,
+		    struct perf_sample_data *data,
+		    struct perf_counter *counter,
+		    struct pt_regs *regs)				{ }
 #endif
 
+#define perf_output_put(handle, x) \
+	perf_output_copy((handle), &(x), sizeof(x))
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_PERF_COUNTER_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index e5bb75a..c8613c3 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -122,6 +122,7 @@
 
 /* Internal flags used only by kernel */
 #define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
 #define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
 #define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
 #define ASYNCB_CLOSING		27 /* Serial port is closing */
@@ -133,6 +134,7 @@
 #define ASYNCB_FIRST_KERNEL	22
 
 #define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
 #define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
 #define ASYNC_SAK		(1U << ASYNCB_SAK)
 #define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d4d2a78..fb46aba 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@
 	void __iomem	*membase;	/* ioremap cookie or NULL */
 	resource_size_t	mapbase;	/* resource base */
 	unsigned int	irq;		/* interrupt number */
+	unsigned long	irqflags;	/* request_irq flags */
 	unsigned int	uartclk;	/* UART clock rate */
 	void            *private_data;
 	unsigned char	regshift;	/* register shift */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 23d2fb0..d58e460 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,6 +20,8 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
+#include <linux/serial.h>
+
 /*
  * The type definitions.  These are from Ted Ts'o's serial.h
  */
@@ -186,7 +188,6 @@
 #include <linux/sysrq.h>
 
 struct uart_port;
-struct uart_info;
 struct serial_struct;
 struct device;
 
@@ -265,6 +266,7 @@
 	unsigned int		(*serial_in)(struct uart_port *, int);
 	void			(*serial_out)(struct uart_port *, int, int);
 	unsigned int		irq;			/* irq number */
+	unsigned long		irqflags;		/* irq flags  */
 	unsigned int		uartclk;		/* base uart clock */
 	unsigned int		fifosize;		/* tx fifo size */
 	unsigned char		x_char;			/* xon/xoff char */
@@ -283,7 +285,7 @@
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
-	struct uart_info	*info;			/* pointer to parent info */
+	struct uart_state	*state;			/* pointer to parent state */
 	struct uart_icount	icount;			/* statistics */
 
 	struct console		*cons;			/* struct console, if any */
@@ -335,52 +337,16 @@
 };
 
 /*
- * This is the state information which is only valid when the port
- * is open; it may be cleared the core driver once the device has
- * been closed.  Either the low level driver or the core can modify
- * stuff here.
- */
-typedef unsigned int __bitwise__ uif_t;
-
-struct uart_info {
-	struct tty_port		port;
-	struct circ_buf		xmit;
-	uif_t			flags;
-
-/*
- * Definitions for info->flags.  These are _private_ to serial_core, and
- * are specific to this structure.  They may be queried by low level drivers.
- *
- * FIXME: use the ASY_ definitions
- */
-#define UIF_CHECK_CD		((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW		((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE	((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED		((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED		((__force uif_t) (1 << 30))
-
-	struct tasklet_struct	tlet;
-	wait_queue_head_t	delta_msr_wait;
-};
-
-/*
  * This is the state information which is persistent across opens.
- * The low level driver must not to touch any elements contained
- * within.
  */
 struct uart_state {
-	unsigned int		close_delay;		/* msec */
-	unsigned int		closing_wait;		/* msec */
+	struct tty_port		port;
 
-#define USF_CLOSING_WAIT_INF	(0)
-#define USF_CLOSING_WAIT_NONE	(~0U)
-
-	int			count;
 	int			pm_state;
-	struct uart_info	info;
-	struct uart_port	*port;
+	struct circ_buf		xmit;
 
-	struct mutex		mutex;
+	struct tasklet_struct	tlet;
+	struct uart_port	*uart_port;
 };
 
 #define UART_XMIT_SIZE	PAGE_SIZE
@@ -461,7 +427,7 @@
 
 static inline int uart_tx_stopped(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	if(tty->stopped || tty->hw_stopped)
 		return 1;
 	return 0;
@@ -476,7 +442,7 @@
 #ifdef SUPPORT_SYSRQ
 	if (port->sysrq) {
 		if (ch && time_before(jiffies, port->sysrq)) {
-			handle_sysrq(ch, port->info->port.tty);
+			handle_sysrq(ch, port->state->port.tty);
 			port->sysrq = 0;
 			return 1;
 		}
@@ -494,7 +460,7 @@
  */
 static inline int uart_handle_break(struct uart_port *port)
 {
-	struct uart_info *info = port->info;
+	struct uart_state *state = port->state;
 #ifdef SUPPORT_SYSRQ
 	if (port->cons && port->cons->index == port->line) {
 		if (!port->sysrq) {
@@ -505,7 +471,7 @@
 	}
 #endif
 	if (port->flags & UPF_SAK)
-		do_SAK(info->port.tty);
+		do_SAK(state->port.tty);
 	return 0;
 }
 
@@ -515,22 +481,23 @@
  *	@status: new carrier detect status, nonzero if active
  */
 static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_info *info = port->info;
+	struct uart_state *state = uport->state;
+	struct tty_port *port = &state->port;
 
-	port->icount.dcd++;
+	uport->icount.dcd++;
 
 #ifdef CONFIG_HARD_PPS
-	if ((port->flags & UPF_HARDPPS_CD) && status)
+	if ((uport->flags & UPF_HARDPPS_CD) && status)
 		hardpps();
 #endif
 
-	if (info->flags & UIF_CHECK_CD) {
+	if (port->flags & ASYNC_CHECK_CD) {
 		if (status)
-			wake_up_interruptible(&info->port.open_wait);
-		else if (info->port.tty)
-			tty_hangup(info->port.tty);
+			wake_up_interruptible(&port->open_wait);
+		else if (port->tty)
+			tty_hangup(port->tty);
 	}
 }
 
@@ -540,24 +507,24 @@
  *	@status: new clear to send status, nonzero if active
  */
 static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_info *info = port->info;
-	struct tty_struct *tty = info->port.tty;
+	struct tty_port *port = &uport->state->port;
+	struct tty_struct *tty = port->tty;
 
-	port->icount.cts++;
+	uport->icount.cts++;
 
-	if (info->flags & UIF_CTS_FLOW) {
+	if (port->flags & ASYNC_CTS_FLOW) {
 		if (tty->hw_stopped) {
 			if (status) {
 				tty->hw_stopped = 0;
-				port->ops->start_tx(port);
-				uart_write_wakeup(port);
+				uport->ops->start_tx(uport);
+				uart_write_wakeup(uport);
 			}
 		} else {
 			if (!status) {
 				tty->hw_stopped = 1;
-				port->ops->stop_tx(port);
+				uport->ops->stop_tx(uport);
 			}
 		}
 	}
@@ -569,7 +536,7 @@
 uart_insert_char(struct uart_port *port, unsigned int status,
 		 unsigned int overrun, unsigned int ch, unsigned int flag)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	if ((status & port->ignore_status_mask & ~overrun) == 0)
 		tty_insert_flip_char(tty, ch, flag);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index a916a31..f0f43d0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -187,7 +187,12 @@
 struct tty_port_operations {
 	/* Return 1 if the carrier is raised */
 	int (*carrier_raised)(struct tty_port *port);
+	/* Control the DTR line */
 	void (*dtr_rts)(struct tty_port *port, int raise);
+	/* Called when the last close completes or a hangup finishes
+	   IFF the port was initialized. Do not use to free resources */
+	void (*shutdown)(struct tty_port *port);
+	void (*drop)(struct tty_port *port);
 };
 	
 struct tty_port {
@@ -198,11 +203,12 @@
 	int			count;		/* Usage count */
 	wait_queue_head_t	open_wait;	/* Open waiters */
 	wait_queue_head_t	close_wait;	/* Close waiters */
+	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
 	struct mutex		mutex;		/* Locking */
 	unsigned char		*xmit_buf;	/* Optional buffer */
-	int			close_delay;	/* Close port delay */
-	int			closing_wait;	/* Delay for output */
+	unsigned int		close_delay;	/* Close port delay */
+	unsigned int		closing_wait;	/* Delay for output */
 	int			drain_delay;	/* Set to zero if no pure time
 						   based drain is needed else
 						   set to size of fifo */
@@ -459,6 +465,12 @@
 extern int tty_port_close_start(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
+extern void tty_port_close(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
+extern inline int tty_port_users(struct tty_port *port)
+{
+	return port->count + port->blocked_open;
+}
 
 extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
 extern int tty_unregister_ldisc(int disc);
@@ -524,5 +536,8 @@
 extern int vt_ioctl(struct tty_struct *tty, struct file *file,
 		    unsigned int cmd, unsigned long arg);
 
+extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+		     unsigned int cmd, unsigned long arg);
+
 #endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0ec50ba..7b85e32 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -238,9 +238,8 @@
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	/* Called by console with tty = NULL and by tty */
-	int  (*open)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	/* Called by console and by the tty layer */
+	int  (*open)(struct tty_struct *tty, struct usb_serial_port *port);
 	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -261,6 +260,9 @@
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);
 	int  (*carrier_raised)(struct usb_serial_port *port);
+	/* Called by the usb serial hooks to allow the user to rework the
+	   termios state */
+	void (*init_termios)(struct tty_struct *tty);
 	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
@@ -300,7 +302,7 @@
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
 extern int usb_serial_generic_open(struct tty_struct *tty,
-		struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 extern void usb_serial_generic_close(struct usb_serial_port *port);
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 02c1c02..7afca0d 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,17 +1,6 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
-#ifdef __KERNEL__
-struct notifier_block;
-
-struct vt_notifier_param {
-	struct vc_data *vc;	/* VC on which the update happened */
-	unsigned int c;		/* Printed char */
-};
-
-extern int register_vt_notifier(struct notifier_block *nb);
-extern int unregister_vt_notifier(struct notifier_block *nb);
-#endif
 
 /*
  * These constants are also useful for user-level apps (e.g., VC
@@ -74,4 +63,25 @@
 #define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
 #define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
 
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int old;		/* Old console */
+	unsigned int new;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
 #endif /* _LINUX_VT_H */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 2f11134..c0c4e11 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -13,6 +13,7 @@
 #include <linux/console_struct.h>
 #include <linux/mm.h>
 #include <linux/consolemap.h>
+#include <linux/notifier.h>
 
 /*
  * Presently, a lot of graphics programs do not restore the contents of
@@ -91,7 +92,8 @@
 #endif
 
 /* vt.c */
-int vt_waitactive(int vt);
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
+int vt_waitactive(int n);
 void change_console(struct vc_data *new_vc);
 void reset_vc(struct vc_data *vc);
 extern int unbind_con_driver(const struct consw *csw, int first, int last,
@@ -116,4 +118,16 @@
 };
 extern struct vt_spawn_console vt_spawn_con;
 
+extern int vt_move_to_console(unsigned int vt, int alloc);
+
+/* Interfaces for VC notification of character events (for accessibility etc) */
+
+struct vt_notifier_param {
+	struct vc_data *vc;	/* VC on which the update happened */
+	unsigned int c;		/* Printed char */
+};
+
+extern int register_vt_notifier(struct notifier_block *nb);
+extern int unregister_vt_notifier(struct notifier_block *nb);
+
 #endif /* _VT_KERN_H */
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
new file mode 100644
index 0000000..ea6d579
--- /dev/null
+++ b/include/trace/events/power.h
@@ -0,0 +1,81 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM power
+
+#if !defined(_TRACE_POWER_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_POWER_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+#ifndef _TRACE_POWER_ENUM_
+#define _TRACE_POWER_ENUM_
+enum {
+	POWER_NONE = 0,
+	POWER_CSTATE = 1,
+	POWER_PSTATE = 2,
+};
+#endif
+
+
+
+TRACE_EVENT(power_start,
+
+	TP_PROTO(unsigned int type, unsigned int state),
+
+	TP_ARGS(type, state),
+
+	TP_STRUCT__entry(
+		__field(	u64,		type		)
+		__field(	u64,		state		)
+	),
+
+	TP_fast_assign(
+		__entry->type = type;
+		__entry->state = state;
+	),
+
+	TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long)__entry->state)
+);
+
+TRACE_EVENT(power_end,
+
+	TP_PROTO(int dummy),
+
+	TP_ARGS(dummy),
+
+	TP_STRUCT__entry(
+		__field(	u64,		dummy		)
+	),
+
+	TP_fast_assign(
+		__entry->dummy = 0xffff;
+	),
+
+	TP_printk("dummy=%lu", (unsigned long)__entry->dummy)
+
+);
+
+
+TRACE_EVENT(power_frequency,
+
+	TP_PROTO(unsigned int type, unsigned int state),
+
+	TP_ARGS(type, state),
+
+	TP_STRUCT__entry(
+		__field(	u64,		type		)
+		__field(	u64,		state		)
+	),
+
+	TP_fast_assign(
+		__entry->type = type;
+		__entry->state = state;
+	),
+
+	TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long) __entry->state)
+);
+
+#endif /* _TRACE_POWER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index b48f1ad..4069c43 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -380,6 +380,39 @@
 );
 
 /*
+ * Tracepoint for accounting runtime (time the task is executing
+ * on a CPU).
+ */
+TRACE_EVENT(sched_stat_runtime,
+
+	TP_PROTO(struct task_struct *tsk, u64 runtime, u64 vruntime),
+
+	TP_ARGS(tsk, runtime, vruntime),
+
+	TP_STRUCT__entry(
+		__array( char,	comm,	TASK_COMM_LEN	)
+		__field( pid_t,	pid			)
+		__field( u64,	runtime			)
+		__field( u64,	vruntime			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+		__entry->pid		= tsk->pid;
+		__entry->runtime	= runtime;
+		__entry->vruntime	= vruntime;
+	)
+	TP_perf_assign(
+		__perf_count(runtime);
+	),
+
+	TP_printk("task: %s:%d runtime: %Lu [ns], vruntime: %Lu [ns]",
+			__entry->comm, __entry->pid,
+			(unsigned long long)__entry->runtime,
+			(unsigned long long)__entry->vruntime)
+);
+
+/*
  * Tracepoint for accounting sleep time (time the task is not runnable,
  * including iowait, see below).
  */
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index 26539e3..3765ff3 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -117,7 +117,7 @@
  * writer, you don't need extra locking to use these functions.
  */
 unsigned int __kfifo_put(struct kfifo *fifo,
-			 unsigned char *buffer, unsigned int len)
+			const unsigned char *buffer, unsigned int len)
 {
 	unsigned int l;
 
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 8cb94a5..cc768ab 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -2176,6 +2176,13 @@
 	data->nr_pages = nr_pages;
 	atomic_set(&data->lock, -1);
 
+	if (counter->attr.watermark) {
+		data->watermark = min_t(long, PAGE_SIZE * nr_pages,
+				      counter->attr.wakeup_watermark);
+	}
+	if (!data->watermark)
+		data->watermark = max(PAGE_SIZE, PAGE_SIZE * nr_pages / 4);
+
 	rcu_assign_pointer(counter->data, data);
 
 	return 0;
@@ -2315,7 +2322,8 @@
 	lock_limit >>= PAGE_SHIFT;
 	locked = vma->vm_mm->locked_vm + extra;
 
-	if ((locked > lock_limit) && !capable(CAP_IPC_LOCK)) {
+	if ((locked > lock_limit) && perf_paranoid_tracepoint_raw() &&
+		!capable(CAP_IPC_LOCK)) {
 		ret = -EPERM;
 		goto unlock;
 	}
@@ -2504,35 +2512,15 @@
 /*
  * Output
  */
-
-struct perf_output_handle {
-	struct perf_counter	*counter;
-	struct perf_mmap_data	*data;
-	unsigned long		head;
-	unsigned long		offset;
-	int			nmi;
-	int			sample;
-	int			locked;
-	unsigned long		flags;
-};
-
-static bool perf_output_space(struct perf_mmap_data *data,
-			      unsigned int offset, unsigned int head)
+static bool perf_output_space(struct perf_mmap_data *data, unsigned long tail,
+			      unsigned long offset, unsigned long head)
 {
-	unsigned long tail;
 	unsigned long mask;
 
 	if (!data->writable)
 		return true;
 
 	mask = (data->nr_pages << PAGE_SHIFT) - 1;
-	/*
-	 * Userspace could choose to issue a mb() before updating the tail
-	 * pointer. So that all reads will be completed before the write is
-	 * issued.
-	 */
-	tail = ACCESS_ONCE(data->user_page->data_tail);
-	smp_rmb();
 
 	offset = (offset - tail) & mask;
 	head   = (head   - tail) & mask;
@@ -2633,8 +2621,8 @@
 	local_irq_restore(handle->flags);
 }
 
-static void perf_output_copy(struct perf_output_handle *handle,
-			     const void *buf, unsigned int len)
+void perf_output_copy(struct perf_output_handle *handle,
+		      const void *buf, unsigned int len)
 {
 	unsigned int pages_mask;
 	unsigned int offset;
@@ -2669,16 +2657,13 @@
 	WARN_ON_ONCE(((long)(handle->head - handle->offset)) < 0);
 }
 
-#define perf_output_put(handle, x) \
-	perf_output_copy((handle), &(x), sizeof(x))
-
-static int perf_output_begin(struct perf_output_handle *handle,
-			     struct perf_counter *counter, unsigned int size,
-			     int nmi, int sample)
+int perf_output_begin(struct perf_output_handle *handle,
+		      struct perf_counter *counter, unsigned int size,
+		      int nmi, int sample)
 {
 	struct perf_counter *output_counter;
 	struct perf_mmap_data *data;
-	unsigned int offset, head;
+	unsigned long tail, offset, head;
 	int have_lost;
 	struct {
 		struct perf_event_header header;
@@ -2716,16 +2701,23 @@
 	perf_output_lock(handle);
 
 	do {
+		/*
+		 * Userspace could choose to issue a mb() before updating the
+		 * tail pointer. So that all reads will be completed before the
+		 * write is issued.
+		 */
+		tail = ACCESS_ONCE(data->user_page->data_tail);
+		smp_rmb();
 		offset = head = atomic_long_read(&data->head);
 		head += size;
-		if (unlikely(!perf_output_space(data, offset, head)))
+		if (unlikely(!perf_output_space(data, tail, offset, head)))
 			goto fail;
 	} while (atomic_long_cmpxchg(&data->head, offset, head) != offset);
 
 	handle->offset	= offset;
 	handle->head	= head;
 
-	if ((offset >> PAGE_SHIFT) != (head >> PAGE_SHIFT))
+	if (head - tail > data->watermark)
 		atomic_set(&data->wakeup, 1);
 
 	if (have_lost) {
@@ -2749,7 +2741,7 @@
 	return -ENOSPC;
 }
 
-static void perf_output_end(struct perf_output_handle *handle)
+void perf_output_end(struct perf_output_handle *handle)
 {
 	struct perf_counter *counter = handle->counter;
 	struct perf_mmap_data *data = handle->data;
@@ -2863,82 +2855,148 @@
 		perf_output_read_one(handle, counter);
 }
 
-void perf_counter_output(struct perf_counter *counter, int nmi,
-				struct perf_sample_data *data)
+void perf_output_sample(struct perf_output_handle *handle,
+			struct perf_event_header *header,
+			struct perf_sample_data *data,
+			struct perf_counter *counter)
 {
-	int ret;
+	u64 sample_type = data->type;
+
+	perf_output_put(handle, *header);
+
+	if (sample_type & PERF_SAMPLE_IP)
+		perf_output_put(handle, data->ip);
+
+	if (sample_type & PERF_SAMPLE_TID)
+		perf_output_put(handle, data->tid_entry);
+
+	if (sample_type & PERF_SAMPLE_TIME)
+		perf_output_put(handle, data->time);
+
+	if (sample_type & PERF_SAMPLE_ADDR)
+		perf_output_put(handle, data->addr);
+
+	if (sample_type & PERF_SAMPLE_ID)
+		perf_output_put(handle, data->id);
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
+		perf_output_put(handle, data->stream_id);
+
+	if (sample_type & PERF_SAMPLE_CPU)
+		perf_output_put(handle, data->cpu_entry);
+
+	if (sample_type & PERF_SAMPLE_PERIOD)
+		perf_output_put(handle, data->period);
+
+	if (sample_type & PERF_SAMPLE_READ)
+		perf_output_read(handle, counter);
+
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+		if (data->callchain) {
+			int size = 1;
+
+			if (data->callchain)
+				size += data->callchain->nr;
+
+			size *= sizeof(u64);
+
+			perf_output_copy(handle, data->callchain, size);
+		} else {
+			u64 nr = 0;
+			perf_output_put(handle, nr);
+		}
+	}
+
+	if (sample_type & PERF_SAMPLE_RAW) {
+		if (data->raw) {
+			perf_output_put(handle, data->raw->size);
+			perf_output_copy(handle, data->raw->data,
+					 data->raw->size);
+		} else {
+			struct {
+				u32	size;
+				u32	data;
+			} raw = {
+				.size = sizeof(u32),
+				.data = 0,
+			};
+			perf_output_put(handle, raw);
+		}
+	}
+}
+
+void perf_prepare_sample(struct perf_event_header *header,
+			 struct perf_sample_data *data,
+			 struct perf_counter *counter,
+			 struct pt_regs *regs)
+{
 	u64 sample_type = counter->attr.sample_type;
-	struct perf_output_handle handle;
-	struct perf_event_header header;
-	u64 ip;
-	struct {
-		u32 pid, tid;
-	} tid_entry;
-	struct perf_callchain_entry *callchain = NULL;
-	int callchain_size = 0;
-	u64 time;
-	struct {
-		u32 cpu, reserved;
-	} cpu_entry;
 
-	header.type = PERF_EVENT_SAMPLE;
-	header.size = sizeof(header);
+	data->type = sample_type;
 
-	header.misc = 0;
-	header.misc |= perf_misc_flags(data->regs);
+	header->type = PERF_EVENT_SAMPLE;
+	header->size = sizeof(*header);
+
+	header->misc = 0;
+	header->misc |= perf_misc_flags(regs);
 
 	if (sample_type & PERF_SAMPLE_IP) {
-		ip = perf_instruction_pointer(data->regs);
-		header.size += sizeof(ip);
+		data->ip = perf_instruction_pointer(regs);
+
+		header->size += sizeof(data->ip);
 	}
 
 	if (sample_type & PERF_SAMPLE_TID) {
 		/* namespace issues */
-		tid_entry.pid = perf_counter_pid(counter, current);
-		tid_entry.tid = perf_counter_tid(counter, current);
+		data->tid_entry.pid = perf_counter_pid(counter, current);
+		data->tid_entry.tid = perf_counter_tid(counter, current);
 
-		header.size += sizeof(tid_entry);
+		header->size += sizeof(data->tid_entry);
 	}
 
 	if (sample_type & PERF_SAMPLE_TIME) {
-		/*
-		 * Maybe do better on x86 and provide cpu_clock_nmi()
-		 */
-		time = sched_clock();
+		data->time = perf_clock();
 
-		header.size += sizeof(u64);
+		header->size += sizeof(data->time);
 	}
 
 	if (sample_type & PERF_SAMPLE_ADDR)
-		header.size += sizeof(u64);
+		header->size += sizeof(data->addr);
 
-	if (sample_type & PERF_SAMPLE_ID)
-		header.size += sizeof(u64);
+	if (sample_type & PERF_SAMPLE_ID) {
+		data->id = primary_counter_id(counter);
 
-	if (sample_type & PERF_SAMPLE_STREAM_ID)
-		header.size += sizeof(u64);
+		header->size += sizeof(data->id);
+	}
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID) {
+		data->stream_id = counter->id;
+
+		header->size += sizeof(data->stream_id);
+	}
 
 	if (sample_type & PERF_SAMPLE_CPU) {
-		header.size += sizeof(cpu_entry);
+		data->cpu_entry.cpu		= raw_smp_processor_id();
+		data->cpu_entry.reserved	= 0;
 
-		cpu_entry.cpu = raw_smp_processor_id();
-		cpu_entry.reserved = 0;
+		header->size += sizeof(data->cpu_entry);
 	}
 
 	if (sample_type & PERF_SAMPLE_PERIOD)
-		header.size += sizeof(u64);
+		header->size += sizeof(data->period);
 
 	if (sample_type & PERF_SAMPLE_READ)
-		header.size += perf_counter_read_size(counter);
+		header->size += perf_counter_read_size(counter);
 
 	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
-		callchain = perf_callchain(data->regs);
+		int size = 1;
 
-		if (callchain) {
-			callchain_size = (1 + callchain->nr) * sizeof(u64);
-			header.size += callchain_size;
-		} else
-			header.size += sizeof(u64);
+		data->callchain = perf_callchain(regs);
+
+		if (data->callchain)
+			size += data->callchain->nr;
+
+		header->size += size * sizeof(u64);
 	}
 
 	if (sample_type & PERF_SAMPLE_RAW) {
@@ -2950,69 +3008,23 @@
 			size += sizeof(u32);
 
 		WARN_ON_ONCE(size & (sizeof(u64)-1));
-		header.size += size;
+		header->size += size;
 	}
+}
 
-	ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
-	if (ret)
+static void perf_counter_output(struct perf_counter *counter, int nmi,
+				struct perf_sample_data *data,
+				struct pt_regs *regs)
+{
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+
+	perf_prepare_sample(&header, data, counter, regs);
+
+	if (perf_output_begin(&handle, counter, header.size, nmi, 1))
 		return;
 
-	perf_output_put(&handle, header);
-
-	if (sample_type & PERF_SAMPLE_IP)
-		perf_output_put(&handle, ip);
-
-	if (sample_type & PERF_SAMPLE_TID)
-		perf_output_put(&handle, tid_entry);
-
-	if (sample_type & PERF_SAMPLE_TIME)
-		perf_output_put(&handle, time);
-
-	if (sample_type & PERF_SAMPLE_ADDR)
-		perf_output_put(&handle, data->addr);
-
-	if (sample_type & PERF_SAMPLE_ID) {
-		u64 id = primary_counter_id(counter);
-
-		perf_output_put(&handle, id);
-	}
-
-	if (sample_type & PERF_SAMPLE_STREAM_ID)
-		perf_output_put(&handle, counter->id);
-
-	if (sample_type & PERF_SAMPLE_CPU)
-		perf_output_put(&handle, cpu_entry);
-
-	if (sample_type & PERF_SAMPLE_PERIOD)
-		perf_output_put(&handle, data->period);
-
-	if (sample_type & PERF_SAMPLE_READ)
-		perf_output_read(&handle, counter);
-
-	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
-		if (callchain)
-			perf_output_copy(&handle, callchain, callchain_size);
-		else {
-			u64 nr = 0;
-			perf_output_put(&handle, nr);
-		}
-	}
-
-	if (sample_type & PERF_SAMPLE_RAW) {
-		if (data->raw) {
-			perf_output_put(&handle, data->raw->size);
-			perf_output_copy(&handle, data->raw->data, data->raw->size);
-		} else {
-			struct {
-				u32	size;
-				u32	data;
-			} raw = {
-				.size = sizeof(u32),
-				.data = 0,
-			};
-			perf_output_put(&handle, raw);
-		}
-	}
+	perf_output_sample(&handle, &header, data, counter);
 
 	perf_output_end(&handle);
 }
@@ -3071,6 +3083,7 @@
 		u32				ppid;
 		u32				tid;
 		u32				ptid;
+		u64				time;
 	} event;
 };
 
@@ -3078,9 +3091,12 @@
 				     struct perf_task_event *task_event)
 {
 	struct perf_output_handle handle;
-	int size = task_event->event.header.size;
+	int size;
 	struct task_struct *task = task_event->task;
-	int ret = perf_output_begin(&handle, counter, size, 0, 0);
+	int ret;
+
+	size  = task_event->event.header.size;
+	ret = perf_output_begin(&handle, counter, size, 0, 0);
 
 	if (ret)
 		return;
@@ -3091,7 +3107,10 @@
 	task_event->event.tid = perf_counter_tid(counter, task);
 	task_event->event.ptid = perf_counter_tid(counter, current);
 
+	task_event->event.time = perf_clock();
+
 	perf_output_put(&handle, task_event->event);
+
 	perf_output_end(&handle);
 }
 
@@ -3473,7 +3492,7 @@
 			.misc = 0,
 			.size = sizeof(throttle_event),
 		},
-		.time		= sched_clock(),
+		.time		= perf_clock(),
 		.id		= primary_counter_id(counter),
 		.stream_id	= counter->id,
 	};
@@ -3493,14 +3512,16 @@
  * Generic counter overflow handling, sampling.
  */
 
-int perf_counter_overflow(struct perf_counter *counter, int nmi,
-			  struct perf_sample_data *data)
+static int __perf_counter_overflow(struct perf_counter *counter, int nmi,
+				   int throttle, struct perf_sample_data *data,
+				   struct pt_regs *regs)
 {
 	int events = atomic_read(&counter->event_limit);
-	int throttle = counter->pmu->unthrottle != NULL;
 	struct hw_perf_counter *hwc = &counter->hw;
 	int ret = 0;
 
+	throttle = (throttle && counter->pmu->unthrottle != NULL);
+
 	if (!throttle) {
 		hwc->interrupts++;
 	} else {
@@ -3523,7 +3544,7 @@
 	}
 
 	if (counter->attr.freq) {
-		u64 now = sched_clock();
+		u64 now = perf_clock();
 		s64 delta = now - hwc->freq_stamp;
 
 		hwc->freq_stamp = now;
@@ -3549,10 +3570,17 @@
 			perf_counter_disable(counter);
 	}
 
-	perf_counter_output(counter, nmi, data);
+	perf_counter_output(counter, nmi, data, regs);
 	return ret;
 }
 
+int perf_counter_overflow(struct perf_counter *counter, int nmi,
+			  struct perf_sample_data *data,
+			  struct pt_regs *regs)
+{
+	return __perf_counter_overflow(counter, nmi, 1, data, regs);
+}
+
 /*
  * Generic software counter infrastructure
  */
@@ -3588,9 +3616,11 @@
 }
 
 static void perf_swcounter_overflow(struct perf_counter *counter,
-				    int nmi, struct perf_sample_data *data)
+				    int nmi, struct perf_sample_data *data,
+				    struct pt_regs *regs)
 {
 	struct hw_perf_counter *hwc = &counter->hw;
+	int throttle = 0;
 	u64 overflow;
 
 	data->period = counter->hw.last_period;
@@ -3600,13 +3630,15 @@
 		return;
 
 	for (; overflow; overflow--) {
-		if (perf_counter_overflow(counter, nmi, data)) {
+		if (__perf_counter_overflow(counter, nmi, throttle,
+					    data, regs)) {
 			/*
 			 * We inhibit the overflow from happening when
 			 * hwc->interrupts == MAX_INTERRUPTS.
 			 */
 			break;
 		}
+		throttle = 1;
 	}
 }
 
@@ -3618,7 +3650,8 @@
 }
 
 static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
-			       int nmi, struct perf_sample_data *data)
+			       int nmi, struct perf_sample_data *data,
+			       struct pt_regs *regs)
 {
 	struct hw_perf_counter *hwc = &counter->hw;
 
@@ -3627,11 +3660,11 @@
 	if (!hwc->sample_period)
 		return;
 
-	if (!data->regs)
+	if (!regs)
 		return;
 
 	if (!atomic64_add_negative(nr, &hwc->period_left))
-		perf_swcounter_overflow(counter, nmi, data);
+		perf_swcounter_overflow(counter, nmi, data, regs);
 }
 
 static int perf_swcounter_is_counting(struct perf_counter *counter)
@@ -3690,7 +3723,8 @@
 static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
 				     enum perf_type_id type,
 				     u32 event, u64 nr, int nmi,
-				     struct perf_sample_data *data)
+				     struct perf_sample_data *data,
+				     struct pt_regs *regs)
 {
 	struct perf_counter *counter;
 
@@ -3699,8 +3733,8 @@
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
-		if (perf_swcounter_match(counter, type, event, data->regs))
-			perf_swcounter_add(counter, nr, nmi, data);
+		if (perf_swcounter_match(counter, type, event, regs))
+			perf_swcounter_add(counter, nr, nmi, data, regs);
 	}
 	rcu_read_unlock();
 }
@@ -3721,7 +3755,8 @@
 
 static void do_perf_swcounter_event(enum perf_type_id type, u32 event,
 				    u64 nr, int nmi,
-				    struct perf_sample_data *data)
+				    struct perf_sample_data *data,
+				    struct pt_regs *regs)
 {
 	struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
 	int *recursion = perf_swcounter_recursion_context(cpuctx);
@@ -3734,7 +3769,7 @@
 	barrier();
 
 	perf_swcounter_ctx_event(&cpuctx->ctx, type, event,
-				 nr, nmi, data);
+				 nr, nmi, data, regs);
 	rcu_read_lock();
 	/*
 	 * doesn't really matter which of the child contexts the
@@ -3742,7 +3777,7 @@
 	 */
 	ctx = rcu_dereference(current->perf_counter_ctxp);
 	if (ctx)
-		perf_swcounter_ctx_event(ctx, type, event, nr, nmi, data);
+		perf_swcounter_ctx_event(ctx, type, event, nr, nmi, data, regs);
 	rcu_read_unlock();
 
 	barrier();
@@ -3756,11 +3791,11 @@
 			    struct pt_regs *regs, u64 addr)
 {
 	struct perf_sample_data data = {
-		.regs = regs,
 		.addr = addr,
 	};
 
-	do_perf_swcounter_event(PERF_TYPE_SOFTWARE, event, nr, nmi, &data);
+	do_perf_swcounter_event(PERF_TYPE_SOFTWARE, event, nr, nmi,
+				&data, regs);
 }
 
 static void perf_swcounter_read(struct perf_counter *counter)
@@ -3797,6 +3832,7 @@
 {
 	enum hrtimer_restart ret = HRTIMER_RESTART;
 	struct perf_sample_data data;
+	struct pt_regs *regs;
 	struct perf_counter *counter;
 	u64 period;
 
@@ -3804,17 +3840,17 @@
 	counter->pmu->read(counter);
 
 	data.addr = 0;
-	data.regs = get_irq_regs();
+	regs = get_irq_regs();
 	/*
 	 * In case we exclude kernel IPs or are somehow not in interrupt
 	 * context, provide the next best thing, the user IP.
 	 */
-	if ((counter->attr.exclude_kernel || !data.regs) &&
+	if ((counter->attr.exclude_kernel || !regs) &&
 			!counter->attr.exclude_user)
-		data.regs = task_pt_regs(current);
+		regs = task_pt_regs(current);
 
-	if (data.regs) {
-		if (perf_counter_overflow(counter, 0, &data))
+	if (regs) {
+		if (perf_counter_overflow(counter, 0, &data, regs))
 			ret = HRTIMER_NORESTART;
 	}
 
@@ -3950,15 +3986,17 @@
 	};
 
 	struct perf_sample_data data = {
-		.regs = get_irq_regs(),
 		.addr = addr,
 		.raw = &raw,
 	};
 
-	if (!data.regs)
-		data.regs = task_pt_regs(current);
+	struct pt_regs *regs = get_irq_regs();
 
-	do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, count, 1, &data);
+	if (!regs)
+		regs = task_pt_regs(current);
+
+	do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, count, 1,
+				&data, regs);
 }
 EXPORT_SYMBOL_GPL(perf_tpcounter_event);
 
@@ -4170,8 +4208,8 @@
 static int perf_copy_attr(struct perf_counter_attr __user *uattr,
 			  struct perf_counter_attr *attr)
 {
-	int ret;
 	u32 size;
+	int ret;
 
 	if (!access_ok(VERIFY_WRITE, uattr, PERF_ATTR_SIZE_VER0))
 		return -EFAULT;
@@ -4196,19 +4234,19 @@
 
 	/*
 	 * If we're handed a bigger struct than we know of,
-	 * ensure all the unknown bits are 0.
+	 * ensure all the unknown bits are 0 - i.e. new
+	 * user-space does not rely on any kernel feature
+	 * extensions we dont know about yet.
 	 */
 	if (size > sizeof(*attr)) {
-		unsigned long val;
-		unsigned long __user *addr;
-		unsigned long __user *end;
+		unsigned char __user *addr;
+		unsigned char __user *end;
+		unsigned char val;
 
-		addr = PTR_ALIGN((void __user *)uattr + sizeof(*attr),
-				sizeof(unsigned long));
-		end  = PTR_ALIGN((void __user *)uattr + size,
-				sizeof(unsigned long));
+		addr = (void __user *)uattr + sizeof(*attr);
+		end  = (void __user *)uattr + size;
 
-		for (; addr < end; addr += sizeof(unsigned long)) {
+		for (; addr < end; addr++) {
 			ret = get_user(val, addr);
 			if (ret)
 				return ret;
diff --git a/kernel/power/console.c b/kernel/power/console.c
index a3961b20..5187136 100644
--- a/kernel/power/console.c
+++ b/kernel/power/console.c
@@ -14,56 +14,13 @@
 #define SUSPEND_CONSOLE	(MAX_NR_CONSOLES-1)
 
 static int orig_fgconsole, orig_kmsg;
-static int disable_vt_switch;
-
-/*
- * Normally during a suspend, we allocate a new console and switch to it.
- * When we resume, we switch back to the original console.  This switch
- * can be slow, so on systems where the framebuffer can handle restoration
- * of video registers anyways, there's little point in doing the console
- * switch.  This function allows you to disable it by passing it '0'.
- */
-void pm_set_vt_switch(int do_switch)
-{
-	acquire_console_sem();
-	disable_vt_switch = !do_switch;
-	release_console_sem();
-}
-EXPORT_SYMBOL(pm_set_vt_switch);
 
 int pm_prepare_console(void)
 {
-	acquire_console_sem();
-
-	if (disable_vt_switch) {
-		release_console_sem();
-		return 0;
-	}
-
-	orig_fgconsole = fg_console;
-
-	if (vc_allocate(SUSPEND_CONSOLE)) {
-	  /* we can't have a free VC for now. Too bad,
-	   * we don't want to mess the screen for now. */
-		release_console_sem();
+	orig_fgconsole = vt_move_to_console(SUSPEND_CONSOLE, 1);
+	if (orig_fgconsole < 0)
 		return 1;
-	}
 
-	if (set_console(SUSPEND_CONSOLE)) {
-		/*
-		 * We're unable to switch to the SUSPEND_CONSOLE.
-		 * Let the calling function know so it can decide
-		 * what to do.
-		 */
-		release_console_sem();
-		return 1;
-	}
-	release_console_sem();
-
-	if (vt_waitactive(SUSPEND_CONSOLE)) {
-		pr_debug("Suspend: Can't switch VCs.");
-		return 1;
-	}
 	orig_kmsg = kmsg_redirect;
 	kmsg_redirect = SUSPEND_CONSOLE;
 	return 0;
@@ -71,19 +28,9 @@
 
 void pm_restore_console(void)
 {
-	acquire_console_sem();
-	if (disable_vt_switch) {
-		release_console_sem();
-		return;
+	if (orig_fgconsole >= 0) {
+		vt_move_to_console(orig_fgconsole, 0);
+		kmsg_redirect = orig_kmsg;
 	}
-	set_console(orig_fgconsole);
-	release_console_sem();
-
-	if (vt_waitactive(orig_fgconsole)) {
-		pr_debug("Resume: Can't switch VCs.");
-		return;
-	}
-
-	kmsg_redirect = orig_kmsg;
 }
 #endif
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index e1d16c9..ac2e1dc 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -48,13 +48,6 @@
 __read_mostly int sched_clock_stable;
 
 struct sched_clock_data {
-	/*
-	 * Raw spinlock - this is a special case: this might be called
-	 * from within instrumentation code so we dont want to do any
-	 * instrumentation ourselves.
-	 */
-	raw_spinlock_t		lock;
-
 	u64			tick_raw;
 	u64			tick_gtod;
 	u64			clock;
@@ -80,7 +73,6 @@
 	for_each_possible_cpu(cpu) {
 		struct sched_clock_data *scd = cpu_sdc(cpu);
 
-		scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 		scd->tick_raw = 0;
 		scd->tick_gtod = ktime_now;
 		scd->clock = ktime_now;
@@ -109,14 +101,19 @@
  *  - filter out backward motion
  *  - use the GTOD tick value to create a window to filter crazy TSC values
  */
-static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
+static u64 sched_clock_local(struct sched_clock_data *scd)
 {
-	s64 delta = now - scd->tick_raw;
-	u64 clock, min_clock, max_clock;
+	u64 now, clock, old_clock, min_clock, max_clock;
+	s64 delta;
 
+again:
+	now = sched_clock();
+	delta = now - scd->tick_raw;
 	if (unlikely(delta < 0))
 		delta = 0;
 
+	old_clock = scd->clock;
+
 	/*
 	 * scd->clock = clamp(scd->tick_gtod + delta,
 	 *		      max(scd->tick_gtod, scd->clock),
@@ -124,84 +121,73 @@
 	 */
 
 	clock = scd->tick_gtod + delta;
-	min_clock = wrap_max(scd->tick_gtod, scd->clock);
-	max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+	min_clock = wrap_max(scd->tick_gtod, old_clock);
+	max_clock = wrap_max(old_clock, scd->tick_gtod + TICK_NSEC);
 
 	clock = wrap_max(clock, min_clock);
 	clock = wrap_min(clock, max_clock);
 
-	scd->clock = clock;
+	if (cmpxchg(&scd->clock, old_clock, clock) != old_clock)
+		goto again;
 
-	return scd->clock;
+	return clock;
 }
 
-static void lock_double_clock(struct sched_clock_data *data1,
-				struct sched_clock_data *data2)
+static u64 sched_clock_remote(struct sched_clock_data *scd)
 {
-	if (data1 < data2) {
-		__raw_spin_lock(&data1->lock);
-		__raw_spin_lock(&data2->lock);
+	struct sched_clock_data *my_scd = this_scd();
+	u64 this_clock, remote_clock;
+	u64 *ptr, old_val, val;
+
+	sched_clock_local(my_scd);
+again:
+	this_clock = my_scd->clock;
+	remote_clock = scd->clock;
+
+	/*
+	 * Use the opportunity that we have both locks
+	 * taken to couple the two clocks: we take the
+	 * larger time as the latest time for both
+	 * runqueues. (this creates monotonic movement)
+	 */
+	if (likely((s64)(remote_clock - this_clock) < 0)) {
+		ptr = &scd->clock;
+		old_val = remote_clock;
+		val = this_clock;
 	} else {
-		__raw_spin_lock(&data2->lock);
-		__raw_spin_lock(&data1->lock);
+		/*
+		 * Should be rare, but possible:
+		 */
+		ptr = &my_scd->clock;
+		old_val = this_clock;
+		val = remote_clock;
 	}
+
+	if (cmpxchg(ptr, old_val, val) != old_val)
+		goto again;
+
+	return val;
 }
 
 u64 sched_clock_cpu(int cpu)
 {
-	u64 now, clock, this_clock, remote_clock;
 	struct sched_clock_data *scd;
+	u64 clock;
+
+	WARN_ON_ONCE(!irqs_disabled());
 
 	if (sched_clock_stable)
 		return sched_clock();
 
-	scd = cpu_sdc(cpu);
-
-	/*
-	 * Normally this is not called in NMI context - but if it is,
-	 * trying to do any locking here is totally lethal.
-	 */
-	if (unlikely(in_nmi()))
-		return scd->clock;
-
 	if (unlikely(!sched_clock_running))
 		return 0ull;
 
-	WARN_ON_ONCE(!irqs_disabled());
-	now = sched_clock();
+	scd = cpu_sdc(cpu);
 
-	if (cpu != raw_smp_processor_id()) {
-		struct sched_clock_data *my_scd = this_scd();
-
-		lock_double_clock(scd, my_scd);
-
-		this_clock = __update_sched_clock(my_scd, now);
-		remote_clock = scd->clock;
-
-		/*
-		 * Use the opportunity that we have both locks
-		 * taken to couple the two clocks: we take the
-		 * larger time as the latest time for both
-		 * runqueues. (this creates monotonic movement)
-		 */
-		if (likely((s64)(remote_clock - this_clock) < 0)) {
-			clock = this_clock;
-			scd->clock = clock;
-		} else {
-			/*
-			 * Should be rare, but possible:
-			 */
-			clock = remote_clock;
-			my_scd->clock = remote_clock;
-		}
-
-		__raw_spin_unlock(&my_scd->lock);
-	} else {
-		__raw_spin_lock(&scd->lock);
-		clock = __update_sched_clock(scd, now);
-	}
-
-	__raw_spin_unlock(&scd->lock);
+	if (cpu != smp_processor_id())
+		clock = sched_clock_remote(scd);
+	else
+		clock = sched_clock_local(scd);
 
 	return clock;
 }
@@ -223,11 +209,9 @@
 	now_gtod = ktime_to_ns(ktime_get());
 	now = sched_clock();
 
-	__raw_spin_lock(&scd->lock);
 	scd->tick_raw = now;
 	scd->tick_gtod = now_gtod;
-	__update_sched_clock(scd, now);
-	__raw_spin_unlock(&scd->lock);
+	sched_clock_local(scd);
 }
 
 /*
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 10d218a..990b188 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -513,6 +513,7 @@
 	if (entity_is_task(curr)) {
 		struct task_struct *curtask = task_of(curr);
 
+		trace_sched_stat_runtime(curtask, delta_exec, curr->vruntime);
 		cpuacct_charge(curtask, delta_exec);
 		account_group_exec_runtime(curtask, delta_exec);
 	}
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index 844164d..26f03ac 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -42,7 +42,6 @@
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += trace_functions_graph.o
 obj-$(CONFIG_TRACE_BRANCH_PROFILING) += trace_branch.o
 obj-$(CONFIG_HW_BRANCH_TRACER) += trace_hw_branches.o
-obj-$(CONFIG_POWER_TRACER) += trace_power.o
 obj-$(CONFIG_KMEMTRACE) += kmemtrace.o
 obj-$(CONFIG_WORKQUEUE_TRACER) += trace_workqueue.o
 obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o
@@ -54,5 +53,6 @@
 obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o
 obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
+obj-$(CONFIG_EVENT_TRACING) += power-traces.o
 
 libftrace-y := ftrace.o
diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c
new file mode 100644
index 0000000..e06c6e3
--- /dev/null
+++ b/kernel/trace/power-traces.c
@@ -0,0 +1,20 @@
+/*
+ * Power trace points
+ *
+ * Copyright (C) 2009 Arjan van de Ven <arjan@linux.intel.com>
+ */
+
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/power.h>
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(power_start);
+EXPORT_TRACEPOINT_SYMBOL_GPL(power_end);
+EXPORT_TRACEPOINT_SYMBOL_GPL(power_frequency);
+
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 86bcff9..405cb85 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -11,7 +11,6 @@
 #include <linux/ftrace.h>
 #include <trace/boot.h>
 #include <linux/kmemtrace.h>
-#include <trace/power.h>
 
 #include <linux/trace_seq.h>
 #include <linux/ftrace_event.h>
@@ -37,7 +36,6 @@
 	TRACE_HW_BRANCHES,
 	TRACE_KMEM_ALLOC,
 	TRACE_KMEM_FREE,
-	TRACE_POWER,
 	TRACE_BLK,
 
 	__TRACE_LAST_TYPE,
@@ -207,7 +205,6 @@
 		IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry,	\
 			  TRACE_GRAPH_RET);		\
 		IF_ASSIGN(var, ent, struct hw_branch_entry, TRACE_HW_BRANCHES);\
-		IF_ASSIGN(var, ent, struct trace_power, TRACE_POWER); \
 		IF_ASSIGN(var, ent, struct kmemtrace_alloc_entry,	\
 			  TRACE_KMEM_ALLOC);	\
 		IF_ASSIGN(var, ent, struct kmemtrace_free_entry,	\
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index a431748..ead3d72 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -330,23 +330,6 @@
 	F_printk("from: %llx to: %llx", __entry->from, __entry->to)
 );
 
-FTRACE_ENTRY(power, trace_power,
-
-	TRACE_POWER,
-
-	F_STRUCT(
-		__field_struct(	struct power_trace,	state_data	)
-		__field_desc(	s64,	state_data,	stamp		)
-		__field_desc(	s64,	state_data,	end		)
-		__field_desc(	int,	state_data,	type		)
-		__field_desc(	int,	state_data,	state		)
-	),
-
-	F_printk("%llx->%llx type:%u state:%u",
-		 __entry->stamp, __entry->end,
-		 __entry->type, __entry->state)
-);
-
 FTRACE_ENTRY(kmem_alloc, kmemtrace_alloc_entry,
 
 	TRACE_KMEM_ALLOC,
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
deleted file mode 100644
index fe1a00f..0000000
--- a/kernel/trace/trace_power.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * ring buffer based C-state tracer
- *
- * Arjan van de Ven <arjan@linux.intel.com>
- * Copyright (C) 2008 Intel Corporation
- *
- * Much is borrowed from trace_boot.c which is
- * Copyright (C) 2008 Frederic Weisbecker <fweisbec@gmail.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <trace/power.h>
-#include <linux/kallsyms.h>
-#include <linux/module.h>
-
-#include "trace.h"
-#include "trace_output.h"
-
-static struct trace_array *power_trace;
-static int __read_mostly trace_power_enabled;
-
-static void probe_power_start(struct power_trace *it, unsigned int type,
-				unsigned int level)
-{
-	if (!trace_power_enabled)
-		return;
-
-	memset(it, 0, sizeof(struct power_trace));
-	it->state = level;
-	it->type = type;
-	it->stamp = ktime_get();
-}
-
-
-static void probe_power_end(struct power_trace *it)
-{
-	struct ftrace_event_call *call = &event_power;
-	struct ring_buffer_event *event;
-	struct ring_buffer *buffer;
-	struct trace_power *entry;
-	struct trace_array_cpu *data;
-	struct trace_array *tr = power_trace;
-
-	if (!trace_power_enabled)
-		return;
-
-	buffer = tr->buffer;
-
-	preempt_disable();
-	it->end = ktime_get();
-	data = tr->data[smp_processor_id()];
-
-	event = trace_buffer_lock_reserve(buffer, TRACE_POWER,
-					  sizeof(*entry), 0, 0);
-	if (!event)
-		goto out;
-	entry	= ring_buffer_event_data(event);
-	entry->state_data = *it;
-	if (!filter_check_discard(call, entry, buffer, event))
-		trace_buffer_unlock_commit(buffer, event, 0, 0);
- out:
-	preempt_enable();
-}
-
-static void probe_power_mark(struct power_trace *it, unsigned int type,
-				unsigned int level)
-{
-	struct ftrace_event_call *call = &event_power;
-	struct ring_buffer_event *event;
-	struct ring_buffer *buffer;
-	struct trace_power *entry;
-	struct trace_array_cpu *data;
-	struct trace_array *tr = power_trace;
-
-	if (!trace_power_enabled)
-		return;
-
-	buffer = tr->buffer;
-
-	memset(it, 0, sizeof(struct power_trace));
-	it->state = level;
-	it->type = type;
-	it->stamp = ktime_get();
-	preempt_disable();
-	it->end = it->stamp;
-	data = tr->data[smp_processor_id()];
-
-	event = trace_buffer_lock_reserve(buffer, TRACE_POWER,
-					  sizeof(*entry), 0, 0);
-	if (!event)
-		goto out;
-	entry	= ring_buffer_event_data(event);
-	entry->state_data = *it;
-	if (!filter_check_discard(call, entry, buffer, event))
-		trace_buffer_unlock_commit(buffer, event, 0, 0);
- out:
-	preempt_enable();
-}
-
-static int tracing_power_register(void)
-{
-	int ret;
-
-	ret = register_trace_power_start(probe_power_start);
-	if (ret) {
-		pr_info("power trace: Couldn't activate tracepoint"
-			" probe to trace_power_start\n");
-		return ret;
-	}
-	ret = register_trace_power_end(probe_power_end);
-	if (ret) {
-		pr_info("power trace: Couldn't activate tracepoint"
-			" probe to trace_power_end\n");
-		goto fail_start;
-	}
-	ret = register_trace_power_mark(probe_power_mark);
-	if (ret) {
-		pr_info("power trace: Couldn't activate tracepoint"
-			" probe to trace_power_mark\n");
-		goto fail_end;
-	}
-	return ret;
-fail_end:
-	unregister_trace_power_end(probe_power_end);
-fail_start:
-	unregister_trace_power_start(probe_power_start);
-	return ret;
-}
-
-static void start_power_trace(struct trace_array *tr)
-{
-	trace_power_enabled = 1;
-}
-
-static void stop_power_trace(struct trace_array *tr)
-{
-	trace_power_enabled = 0;
-}
-
-static void power_trace_reset(struct trace_array *tr)
-{
-	trace_power_enabled = 0;
-	unregister_trace_power_start(probe_power_start);
-	unregister_trace_power_end(probe_power_end);
-	unregister_trace_power_mark(probe_power_mark);
-}
-
-
-static int power_trace_init(struct trace_array *tr)
-{
-	power_trace = tr;
-
-	trace_power_enabled = 1;
-	tracing_power_register();
-
-	tracing_reset_online_cpus(tr);
-	return 0;
-}
-
-static enum print_line_t power_print_line(struct trace_iterator *iter)
-{
-	int ret = 0;
-	struct trace_entry *entry = iter->ent;
-	struct trace_power *field ;
-	struct power_trace *it;
-	struct trace_seq *s = &iter->seq;
-	struct timespec stamp;
-	struct timespec duration;
-
-	trace_assign_type(field, entry);
-	it = &field->state_data;
-	stamp = ktime_to_timespec(it->stamp);
-	duration = ktime_to_timespec(ktime_sub(it->end, it->stamp));
-
-	if (entry->type == TRACE_POWER) {
-		if (it->type == POWER_CSTATE)
-			ret = trace_seq_printf(s, "[%5ld.%09ld] CSTATE: Going to C%i on cpu %i for %ld.%09ld\n",
-					  stamp.tv_sec,
-					  stamp.tv_nsec,
-					  it->state, iter->cpu,
-					  duration.tv_sec,
-					  duration.tv_nsec);
-		if (it->type == POWER_PSTATE)
-			ret = trace_seq_printf(s, "[%5ld.%09ld] PSTATE: Going to P%i on cpu %i\n",
-					  stamp.tv_sec,
-					  stamp.tv_nsec,
-					  it->state, iter->cpu);
-		if (!ret)
-			return TRACE_TYPE_PARTIAL_LINE;
-		return TRACE_TYPE_HANDLED;
-	}
-	return TRACE_TYPE_UNHANDLED;
-}
-
-static void power_print_header(struct seq_file *s)
-{
-	seq_puts(s, "#   TIMESTAMP      STATE  EVENT\n");
-	seq_puts(s, "#       |            |      |\n");
-}
-
-static struct tracer power_tracer __read_mostly =
-{
-	.name		= "power",
-	.init		= power_trace_init,
-	.start		= start_power_trace,
-	.stop		= stop_power_trace,
-	.reset		= power_trace_reset,
-	.print_line	= power_print_line,
-	.print_header	= power_print_header,
-};
-
-static int init_power_trace(void)
-{
-	return register_tracer(&power_tracer);
-}
-device_initcall(init_power_trace);
diff --git a/scripts/tracing/power.pl b/scripts/tracing/power.pl
deleted file mode 100644
index 4f729b3..0000000
--- a/scripts/tracing/power.pl
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/usr/bin/perl
-
-# Copyright 2008, Intel Corporation
-#
-# This file is part of the Linux kernel
-#
-# This program file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program in a file named COPYING; if not, write to the
-# Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301 USA
-#
-# Authors:
-# 	Arjan van de Ven <arjan@linux.intel.com>
-
-
-#
-# This script turns a cstate ftrace output into a SVG graphic that shows
-# historic C-state information
-#
-#
-# 	cat /sys/kernel/debug/tracing/trace | perl power.pl > out.svg
-#
-
-my @styles;
-my $base = 0;
-
-my @pstate_last;
-my @pstate_level;
-
-$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-$styles[8] = "fill:rgb(0,25,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
-
-
-print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
-print "<svg width=\"10000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
-
-my $scale = 30000.0;
-while (<>) {
-	my $line = $_;
-	if ($line =~ /([0-9\.]+)\] CSTATE: Going to C([0-9]) on cpu ([0-9]+) for ([0-9\.]+)/) {
-		if ($base == 0) {
-			$base = $1;
-		}
-		my $time = $1 - $base;
-		$time = $time * $scale;
-		my $C = $2;
-		my $cpu = $3;
-		my $y = 400 * $cpu;
-		my $duration = $4 * $scale;
-		my $msec = int($4 * 100000)/100.0;
-		my $height = $C * 20;
-		$style = $styles[$C];
-
-		$y = $y + 140 - $height;
-
-		$x2 = $time + 4;
-		$y2 = $y + 4;
-
-
-		print "<rect x=\"$time\" width=\"$duration\" y=\"$y\" height=\"$height\" style=\"$style\"/>\n";
-		print "<text transform=\"translate($x2,$y2) rotate(90)\">C$C $msec</text>\n";
-	}
-	if ($line =~ /([0-9\.]+)\] PSTATE: Going to P([0-9]) on cpu ([0-9]+)/) {
-		my $time = $1 - $base;
-		my $state = $2;
-		my $cpu = $3;
-
-		if (defined($pstate_last[$cpu])) {
-			my $from = $pstate_last[$cpu];
-			my $oldstate = $pstate_state[$cpu];
-			my $duration = ($time-$from) * $scale;
-
-			$from = $from * $scale;
-			my $to = $from + $duration;
-			my $height = 140 - ($oldstate * (140/8));
-
-			my $y = 400 * $cpu + 200 + $height;
-			my $y2 = $y+4;
-			my $style = $styles[8];
-
-			print "<rect x=\"$from\" y=\"$y\" width=\"$duration\" height=\"5\" style=\"$style\"/>\n";
-			print "<text transform=\"translate($from,$y2)\">P$oldstate (cpu $cpu)</text>\n";
-		};
-
-		$pstate_last[$cpu] = $time;
-		$pstate_state[$cpu] = $state;
-	}
-}
-
-
-print "</svg>\n";
diff --git a/tools/perf/Documentation/perf-sched.txt b/tools/perf/Documentation/perf-sched.txt
new file mode 100644
index 0000000..1ce7919
--- /dev/null
+++ b/tools/perf/Documentation/perf-sched.txt
@@ -0,0 +1,41 @@
+perf-sched(1)
+==============
+
+NAME
+----
+perf-sched - Tool to trace/measure scheduler properties (latencies)
+
+SYNOPSIS
+--------
+[verse]
+'perf sched' {record|latency|replay|trace}
+
+DESCRIPTION
+-----------
+There's four variants of perf sched:
+
+  'perf sched record <command>' to record the scheduling events
+  of an arbitrary workload.
+
+  'perf sched latency' to report the per task scheduling latencies
+  and other scheduling properties of the workload.
+
+  'perf sched trace' to see a detailed trace of the workload that
+  was recorded.
+
+  'perf sched replay' to simulate the workload that was recorded
+  via perf sched record. (this is done by starting up mockup threads
+  that mimic the workload based on the events in the trace. These
+  threads can then replay the timings (CPU runtime and sleep patterns)
+  of the workload as it occured when it was recorded - and can repeat
+  it a number of times, measuring its performance.)
+
+OPTIONS
+-------
+-D::
+--dump-raw-trace=::
+        Display verbose dump of the sched data.
+
+SEE ALSO
+--------
+linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-timechart.txt b/tools/perf/Documentation/perf-timechart.txt
new file mode 100644
index 0000000..61e0104
--- /dev/null
+++ b/tools/perf/Documentation/perf-timechart.txt
@@ -0,0 +1,35 @@
+perf-timechart(1)
+=================
+
+NAME
+----
+perf-timechart - Tool to visualize total system behavior during a workload
+
+SYNOPSIS
+--------
+[verse]
+'perf timechart' {record}
+
+DESCRIPTION
+-----------
+There are two variants of perf timechart:
+
+  'perf timechart record <command>' to record the system level events
+  of an arbitrary workload.
+
+  'perf timechart' to turn a trace into a Scalable Vector Graphics file,
+  that can be viewed with popular SVG viewers such as 'Inkscape'.
+
+OPTIONS
+-------
+-o::
+--output=::
+        Select the output file (default: output.svg)
+-i::
+--input=::
+        Select the input file (default: perf.data)
+
+
+SEE ALSO
+--------
+linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
new file mode 100644
index 0000000..41ed753
--- /dev/null
+++ b/tools/perf/Documentation/perf-trace.txt
@@ -0,0 +1,25 @@
+perf-trace(1)
+==============
+
+NAME
+----
+perf-trace - Read perf.data (created by perf record) and display trace output
+
+SYNOPSIS
+--------
+[verse]
+'perf trace' [-i <file> | --input=file] symbol_name
+
+DESCRIPTION
+-----------
+This command reads the input file and displays the trace recorded.
+
+OPTIONS
+-------
+-D::
+--dump-raw-trace=::
+        Display verbose dump of the trace data.
+
+SEE ALSO
+--------
+linkperf:perf-record[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 9f8d207..0aba8b6 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -373,13 +373,16 @@
 LIB_OBJS += util/trace-event-parse.o
 LIB_OBJS += util/trace-event-read.o
 LIB_OBJS += util/trace-event-info.o
+LIB_OBJS += util/svghelper.o
 
 BUILTIN_OBJS += builtin-annotate.o
 BUILTIN_OBJS += builtin-help.o
+BUILTIN_OBJS += builtin-sched.o
 BUILTIN_OBJS += builtin-list.o
 BUILTIN_OBJS += builtin-record.o
 BUILTIN_OBJS += builtin-report.o
 BUILTIN_OBJS += builtin-stat.o
+BUILTIN_OBJS += builtin-timechart.o
 BUILTIN_OBJS += builtin-top.o
 BUILTIN_OBJS += builtin-trace.o
 
@@ -710,6 +713,12 @@
 		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
 		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
 
+builtin-timechart.o: builtin-timechart.c common-cmds.h PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) \
+		'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
+		'-DPERF_MAN_PATH="$(mandir_SQ)"' \
+		'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
+
 $(BUILT_INS): perf$X
 	$(QUIET_BUILT_IN)$(RM) $@ && \
 	ln perf$X $@ 2>/dev/null || \
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 99a12fe..2459e5a 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -48,6 +48,8 @@
 static int			inherit_stat			= 0;
 static int			no_samples			= 0;
 static int			sample_address			= 0;
+static int			multiplex			= 0;
+static int			multiplex_fd			= -1;
 
 static long			samples;
 static struct timeval		last_read;
@@ -470,19 +472,28 @@
 	 */
 	if (group && group_fd == -1)
 		group_fd = fd[nr_cpu][counter];
+	if (multiplex && multiplex_fd == -1)
+		multiplex_fd = fd[nr_cpu][counter];
 
-	event_array[nr_poll].fd = fd[nr_cpu][counter];
-	event_array[nr_poll].events = POLLIN;
-	nr_poll++;
+	if (multiplex && fd[nr_cpu][counter] != multiplex_fd) {
+		int ret;
 
-	mmap_array[nr_cpu][counter].counter = counter;
-	mmap_array[nr_cpu][counter].prev = 0;
-	mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1;
-	mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size,
-			PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter], 0);
-	if (mmap_array[nr_cpu][counter].base == MAP_FAILED) {
-		error("failed to mmap with %d (%s)\n", errno, strerror(errno));
-		exit(-1);
+		ret = ioctl(fd[nr_cpu][counter], PERF_COUNTER_IOC_SET_OUTPUT, multiplex_fd);
+		assert(ret != -1);
+	} else {
+		event_array[nr_poll].fd = fd[nr_cpu][counter];
+		event_array[nr_poll].events = POLLIN;
+		nr_poll++;
+
+		mmap_array[nr_cpu][counter].counter = counter;
+		mmap_array[nr_cpu][counter].prev = 0;
+		mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1;
+		mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size,
+				PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter], 0);
+		if (mmap_array[nr_cpu][counter].base == MAP_FAILED) {
+			error("failed to mmap with %d (%s)\n", errno, strerror(errno));
+			exit(-1);
+		}
 	}
 
 	ioctl(fd[nr_cpu][counter], PERF_COUNTER_IOC_ENABLE);
@@ -513,6 +524,7 @@
 	pid_t pid = 0;
 	int flags;
 	int ret;
+	unsigned long waking = 0;
 
 	page_size = sysconf(_SC_PAGE_SIZE);
 	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
@@ -614,17 +626,29 @@
 		int hits = samples;
 
 		for (i = 0; i < nr_cpu; i++) {
-			for (counter = 0; counter < nr_counters; counter++)
-				mmap_read(&mmap_array[i][counter]);
+			for (counter = 0; counter < nr_counters; counter++) {
+				if (mmap_array[i][counter].base)
+					mmap_read(&mmap_array[i][counter]);
+			}
 		}
 
 		if (hits == samples) {
 			if (done)
 				break;
-			ret = poll(event_array, nr_poll, 100);
+			ret = poll(event_array, nr_poll, -1);
+			waking++;
+		}
+
+		if (done) {
+			for (i = 0; i < nr_cpu; i++) {
+				for (counter = 0; counter < nr_counters; counter++)
+					ioctl(fd[i][counter], PERF_COUNTER_IOC_DISABLE);
+			}
 		}
 	}
 
+	fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
+
 	/*
 	 * Approximate RIP event size: 24 bytes.
 	 */
@@ -681,6 +705,8 @@
 		    "Sample addresses"),
 	OPT_BOOLEAN('n', "no-samples", &no_samples,
 		    "don't sample"),
+	OPT_BOOLEAN('M', "multiplex", &multiplex,
+		    "multiplex counter output in a single channel"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
new file mode 100644
index 0000000..275d79c
--- /dev/null
+++ b/tools/perf/builtin-sched.c
@@ -0,0 +1,2004 @@
+#include "builtin.h"
+#include "perf.h"
+
+#include "util/util.h"
+#include "util/cache.h"
+#include "util/symbol.h"
+#include "util/thread.h"
+#include "util/header.h"
+
+#include "util/parse-options.h"
+#include "util/trace-event.h"
+
+#include "util/debug.h"
+
+#include <sys/types.h>
+#include <sys/prctl.h>
+
+#include <semaphore.h>
+#include <pthread.h>
+#include <math.h>
+
+static char			const *input_name = "perf.data";
+static int			input;
+static unsigned long		page_size;
+static unsigned long		mmap_window = 32;
+
+static unsigned long		total_comm = 0;
+
+static struct rb_root		threads;
+static struct thread		*last_match;
+
+static struct perf_header	*header;
+static u64			sample_type;
+
+static char			default_sort_order[] = "avg, max, switch, runtime";
+static char			*sort_order = default_sort_order;
+
+#define PR_SET_NAME		15               /* Set process name */
+#define MAX_CPUS		4096
+
+#define BUG_ON(x)		assert(!(x))
+
+static u64			run_measurement_overhead;
+static u64			sleep_measurement_overhead;
+
+#define COMM_LEN		20
+#define SYM_LEN			129
+
+#define MAX_PID			65536
+
+static unsigned long		nr_tasks;
+
+struct sched_atom;
+
+struct task_desc {
+	unsigned long		nr;
+	unsigned long		pid;
+	char			comm[COMM_LEN];
+
+	unsigned long		nr_events;
+	unsigned long		curr_event;
+	struct sched_atom	**atoms;
+
+	pthread_t		thread;
+	sem_t			sleep_sem;
+
+	sem_t			ready_for_work;
+	sem_t			work_done_sem;
+
+	u64			cpu_usage;
+};
+
+enum sched_event_type {
+	SCHED_EVENT_RUN,
+	SCHED_EVENT_SLEEP,
+	SCHED_EVENT_WAKEUP,
+};
+
+struct sched_atom {
+	enum sched_event_type	type;
+	u64			timestamp;
+	u64			duration;
+	unsigned long		nr;
+	int			specific_wait;
+	sem_t			*wait_sem;
+	struct task_desc	*wakee;
+};
+
+static struct task_desc		*pid_to_task[MAX_PID];
+
+static struct task_desc		**tasks;
+
+static pthread_mutex_t		start_work_mutex = PTHREAD_MUTEX_INITIALIZER;
+static u64			start_time;
+
+static pthread_mutex_t		work_done_wait_mutex = PTHREAD_MUTEX_INITIALIZER;
+
+static unsigned long		nr_run_events;
+static unsigned long		nr_sleep_events;
+static unsigned long		nr_wakeup_events;
+
+static unsigned long		nr_sleep_corrections;
+static unsigned long		nr_run_events_optimized;
+
+static unsigned long		targetless_wakeups;
+static unsigned long		multitarget_wakeups;
+
+static u64			cpu_usage;
+static u64			runavg_cpu_usage;
+static u64			parent_cpu_usage;
+static u64			runavg_parent_cpu_usage;
+
+static unsigned long		nr_runs;
+static u64			sum_runtime;
+static u64			sum_fluct;
+static u64			run_avg;
+
+static unsigned long		replay_repeat = 10;
+static unsigned long		nr_timestamps;
+static unsigned long		nr_unordered_timestamps;
+static unsigned long		nr_state_machine_bugs;
+static unsigned long		nr_context_switch_bugs;
+static unsigned long		nr_events;
+static unsigned long		nr_lost_chunks;
+static unsigned long		nr_lost_events;
+
+#define TASK_STATE_TO_CHAR_STR "RSDTtZX"
+
+enum thread_state {
+	THREAD_SLEEPING = 0,
+	THREAD_WAIT_CPU,
+	THREAD_SCHED_IN,
+	THREAD_IGNORE
+};
+
+struct work_atom {
+	struct list_head	list;
+	enum thread_state	state;
+	u64			sched_out_time;
+	u64			wake_up_time;
+	u64			sched_in_time;
+	u64			runtime;
+};
+
+struct work_atoms {
+	struct list_head	work_list;
+	struct thread		*thread;
+	struct rb_node		node;
+	u64			max_lat;
+	u64			total_lat;
+	u64			nb_atoms;
+	u64			total_runtime;
+};
+
+typedef int (*sort_fn_t)(struct work_atoms *, struct work_atoms *);
+
+static struct rb_root		atom_root, sorted_atom_root;
+
+static u64			all_runtime;
+static u64			all_count;
+
+
+static u64 get_nsecs(void)
+{
+	struct timespec ts;
+
+	clock_gettime(CLOCK_MONOTONIC, &ts);
+
+	return ts.tv_sec * 1000000000ULL + ts.tv_nsec;
+}
+
+static void burn_nsecs(u64 nsecs)
+{
+	u64 T0 = get_nsecs(), T1;
+
+	do {
+		T1 = get_nsecs();
+	} while (T1 + run_measurement_overhead < T0 + nsecs);
+}
+
+static void sleep_nsecs(u64 nsecs)
+{
+	struct timespec ts;
+
+	ts.tv_nsec = nsecs % 999999999;
+	ts.tv_sec = nsecs / 999999999;
+
+	nanosleep(&ts, NULL);
+}
+
+static void calibrate_run_measurement_overhead(void)
+{
+	u64 T0, T1, delta, min_delta = 1000000000ULL;
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		T0 = get_nsecs();
+		burn_nsecs(0);
+		T1 = get_nsecs();
+		delta = T1-T0;
+		min_delta = min(min_delta, delta);
+	}
+	run_measurement_overhead = min_delta;
+
+	printf("run measurement overhead: %Ld nsecs\n", min_delta);
+}
+
+static void calibrate_sleep_measurement_overhead(void)
+{
+	u64 T0, T1, delta, min_delta = 1000000000ULL;
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		T0 = get_nsecs();
+		sleep_nsecs(10000);
+		T1 = get_nsecs();
+		delta = T1-T0;
+		min_delta = min(min_delta, delta);
+	}
+	min_delta -= 10000;
+	sleep_measurement_overhead = min_delta;
+
+	printf("sleep measurement overhead: %Ld nsecs\n", min_delta);
+}
+
+static struct sched_atom *
+get_new_event(struct task_desc *task, u64 timestamp)
+{
+	struct sched_atom *event = calloc(1, sizeof(*event));
+	unsigned long idx = task->nr_events;
+	size_t size;
+
+	event->timestamp = timestamp;
+	event->nr = idx;
+
+	task->nr_events++;
+	size = sizeof(struct sched_atom *) * task->nr_events;
+	task->atoms = realloc(task->atoms, size);
+	BUG_ON(!task->atoms);
+
+	task->atoms[idx] = event;
+
+	return event;
+}
+
+static struct sched_atom *last_event(struct task_desc *task)
+{
+	if (!task->nr_events)
+		return NULL;
+
+	return task->atoms[task->nr_events - 1];
+}
+
+static void
+add_sched_event_run(struct task_desc *task, u64 timestamp, u64 duration)
+{
+	struct sched_atom *event, *curr_event = last_event(task);
+
+	/*
+	 * optimize an existing RUN event by merging this one
+	 * to it:
+	 */
+	if (curr_event && curr_event->type == SCHED_EVENT_RUN) {
+		nr_run_events_optimized++;
+		curr_event->duration += duration;
+		return;
+	}
+
+	event = get_new_event(task, timestamp);
+
+	event->type = SCHED_EVENT_RUN;
+	event->duration = duration;
+
+	nr_run_events++;
+}
+
+static void
+add_sched_event_wakeup(struct task_desc *task, u64 timestamp,
+		       struct task_desc *wakee)
+{
+	struct sched_atom *event, *wakee_event;
+
+	event = get_new_event(task, timestamp);
+	event->type = SCHED_EVENT_WAKEUP;
+	event->wakee = wakee;
+
+	wakee_event = last_event(wakee);
+	if (!wakee_event || wakee_event->type != SCHED_EVENT_SLEEP) {
+		targetless_wakeups++;
+		return;
+	}
+	if (wakee_event->wait_sem) {
+		multitarget_wakeups++;
+		return;
+	}
+
+	wakee_event->wait_sem = calloc(1, sizeof(*wakee_event->wait_sem));
+	sem_init(wakee_event->wait_sem, 0, 0);
+	wakee_event->specific_wait = 1;
+	event->wait_sem = wakee_event->wait_sem;
+
+	nr_wakeup_events++;
+}
+
+static void
+add_sched_event_sleep(struct task_desc *task, u64 timestamp,
+		      u64 task_state __used)
+{
+	struct sched_atom *event = get_new_event(task, timestamp);
+
+	event->type = SCHED_EVENT_SLEEP;
+
+	nr_sleep_events++;
+}
+
+static struct task_desc *register_pid(unsigned long pid, const char *comm)
+{
+	struct task_desc *task;
+
+	BUG_ON(pid >= MAX_PID);
+
+	task = pid_to_task[pid];
+
+	if (task)
+		return task;
+
+	task = calloc(1, sizeof(*task));
+	task->pid = pid;
+	task->nr = nr_tasks;
+	strcpy(task->comm, comm);
+	/*
+	 * every task starts in sleeping state - this gets ignored
+	 * if there's no wakeup pointing to this sleep state:
+	 */
+	add_sched_event_sleep(task, 0, 0);
+
+	pid_to_task[pid] = task;
+	nr_tasks++;
+	tasks = realloc(tasks, nr_tasks*sizeof(struct task_task *));
+	BUG_ON(!tasks);
+	tasks[task->nr] = task;
+
+	if (verbose)
+		printf("registered task #%ld, PID %ld (%s)\n", nr_tasks, pid, comm);
+
+	return task;
+}
+
+
+static void print_task_traces(void)
+{
+	struct task_desc *task;
+	unsigned long i;
+
+	for (i = 0; i < nr_tasks; i++) {
+		task = tasks[i];
+		printf("task %6ld (%20s:%10ld), nr_events: %ld\n",
+			task->nr, task->comm, task->pid, task->nr_events);
+	}
+}
+
+static void add_cross_task_wakeups(void)
+{
+	struct task_desc *task1, *task2;
+	unsigned long i, j;
+
+	for (i = 0; i < nr_tasks; i++) {
+		task1 = tasks[i];
+		j = i + 1;
+		if (j == nr_tasks)
+			j = 0;
+		task2 = tasks[j];
+		add_sched_event_wakeup(task1, 0, task2);
+	}
+}
+
+static void
+process_sched_event(struct task_desc *this_task __used, struct sched_atom *atom)
+{
+	int ret = 0;
+	u64 now;
+	long long delta;
+
+	now = get_nsecs();
+	delta = start_time + atom->timestamp - now;
+
+	switch (atom->type) {
+		case SCHED_EVENT_RUN:
+			burn_nsecs(atom->duration);
+			break;
+		case SCHED_EVENT_SLEEP:
+			if (atom->wait_sem)
+				ret = sem_wait(atom->wait_sem);
+			BUG_ON(ret);
+			break;
+		case SCHED_EVENT_WAKEUP:
+			if (atom->wait_sem)
+				ret = sem_post(atom->wait_sem);
+			BUG_ON(ret);
+			break;
+		default:
+			BUG_ON(1);
+	}
+}
+
+static u64 get_cpu_usage_nsec_parent(void)
+{
+	struct rusage ru;
+	u64 sum;
+	int err;
+
+	err = getrusage(RUSAGE_SELF, &ru);
+	BUG_ON(err);
+
+	sum =  ru.ru_utime.tv_sec*1e9 + ru.ru_utime.tv_usec*1e3;
+	sum += ru.ru_stime.tv_sec*1e9 + ru.ru_stime.tv_usec*1e3;
+
+	return sum;
+}
+
+static u64 get_cpu_usage_nsec_self(void)
+{
+	char filename [] = "/proc/1234567890/sched";
+	unsigned long msecs, nsecs;
+	char *line = NULL;
+	u64 total = 0;
+	size_t len = 0;
+	ssize_t chars;
+	FILE *file;
+	int ret;
+
+	sprintf(filename, "/proc/%d/sched", getpid());
+	file = fopen(filename, "r");
+	BUG_ON(!file);
+
+	while ((chars = getline(&line, &len, file)) != -1) {
+		ret = sscanf(line, "se.sum_exec_runtime : %ld.%06ld\n",
+			&msecs, &nsecs);
+		if (ret == 2) {
+			total = msecs*1e6 + nsecs;
+			break;
+		}
+	}
+	if (line)
+		free(line);
+	fclose(file);
+
+	return total;
+}
+
+static void *thread_func(void *ctx)
+{
+	struct task_desc *this_task = ctx;
+	u64 cpu_usage_0, cpu_usage_1;
+	unsigned long i, ret;
+	char comm2[22];
+
+	sprintf(comm2, ":%s", this_task->comm);
+	prctl(PR_SET_NAME, comm2);
+
+again:
+	ret = sem_post(&this_task->ready_for_work);
+	BUG_ON(ret);
+	ret = pthread_mutex_lock(&start_work_mutex);
+	BUG_ON(ret);
+	ret = pthread_mutex_unlock(&start_work_mutex);
+	BUG_ON(ret);
+
+	cpu_usage_0 = get_cpu_usage_nsec_self();
+
+	for (i = 0; i < this_task->nr_events; i++) {
+		this_task->curr_event = i;
+		process_sched_event(this_task, this_task->atoms[i]);
+	}
+
+	cpu_usage_1 = get_cpu_usage_nsec_self();
+	this_task->cpu_usage = cpu_usage_1 - cpu_usage_0;
+
+	ret = sem_post(&this_task->work_done_sem);
+	BUG_ON(ret);
+
+	ret = pthread_mutex_lock(&work_done_wait_mutex);
+	BUG_ON(ret);
+	ret = pthread_mutex_unlock(&work_done_wait_mutex);
+	BUG_ON(ret);
+
+	goto again;
+}
+
+static void create_tasks(void)
+{
+	struct task_desc *task;
+	pthread_attr_t attr;
+	unsigned long i;
+	int err;
+
+	err = pthread_attr_init(&attr);
+	BUG_ON(err);
+	err = pthread_attr_setstacksize(&attr, (size_t)(16*1024));
+	BUG_ON(err);
+	err = pthread_mutex_lock(&start_work_mutex);
+	BUG_ON(err);
+	err = pthread_mutex_lock(&work_done_wait_mutex);
+	BUG_ON(err);
+	for (i = 0; i < nr_tasks; i++) {
+		task = tasks[i];
+		sem_init(&task->sleep_sem, 0, 0);
+		sem_init(&task->ready_for_work, 0, 0);
+		sem_init(&task->work_done_sem, 0, 0);
+		task->curr_event = 0;
+		err = pthread_create(&task->thread, &attr, thread_func, task);
+		BUG_ON(err);
+	}
+}
+
+static void wait_for_tasks(void)
+{
+	u64 cpu_usage_0, cpu_usage_1;
+	struct task_desc *task;
+	unsigned long i, ret;
+
+	start_time = get_nsecs();
+	cpu_usage = 0;
+	pthread_mutex_unlock(&work_done_wait_mutex);
+
+	for (i = 0; i < nr_tasks; i++) {
+		task = tasks[i];
+		ret = sem_wait(&task->ready_for_work);
+		BUG_ON(ret);
+		sem_init(&task->ready_for_work, 0, 0);
+	}
+	ret = pthread_mutex_lock(&work_done_wait_mutex);
+	BUG_ON(ret);
+
+	cpu_usage_0 = get_cpu_usage_nsec_parent();
+
+	pthread_mutex_unlock(&start_work_mutex);
+
+	for (i = 0; i < nr_tasks; i++) {
+		task = tasks[i];
+		ret = sem_wait(&task->work_done_sem);
+		BUG_ON(ret);
+		sem_init(&task->work_done_sem, 0, 0);
+		cpu_usage += task->cpu_usage;
+		task->cpu_usage = 0;
+	}
+
+	cpu_usage_1 = get_cpu_usage_nsec_parent();
+	if (!runavg_cpu_usage)
+		runavg_cpu_usage = cpu_usage;
+	runavg_cpu_usage = (runavg_cpu_usage*9 + cpu_usage)/10;
+
+	parent_cpu_usage = cpu_usage_1 - cpu_usage_0;
+	if (!runavg_parent_cpu_usage)
+		runavg_parent_cpu_usage = parent_cpu_usage;
+	runavg_parent_cpu_usage = (runavg_parent_cpu_usage*9 +
+				   parent_cpu_usage)/10;
+
+	ret = pthread_mutex_lock(&start_work_mutex);
+	BUG_ON(ret);
+
+	for (i = 0; i < nr_tasks; i++) {
+		task = tasks[i];
+		sem_init(&task->sleep_sem, 0, 0);
+		task->curr_event = 0;
+	}
+}
+
+static void run_one_test(void)
+{
+	u64 T0, T1, delta, avg_delta, fluct, std_dev;
+
+	T0 = get_nsecs();
+	wait_for_tasks();
+	T1 = get_nsecs();
+
+	delta = T1 - T0;
+	sum_runtime += delta;
+	nr_runs++;
+
+	avg_delta = sum_runtime / nr_runs;
+	if (delta < avg_delta)
+		fluct = avg_delta - delta;
+	else
+		fluct = delta - avg_delta;
+	sum_fluct += fluct;
+	std_dev = sum_fluct / nr_runs / sqrt(nr_runs);
+	if (!run_avg)
+		run_avg = delta;
+	run_avg = (run_avg*9 + delta)/10;
+
+	printf("#%-3ld: %0.3f, ",
+		nr_runs, (double)delta/1000000.0);
+
+	printf("ravg: %0.2f, ",
+		(double)run_avg/1e6);
+
+	printf("cpu: %0.2f / %0.2f",
+		(double)cpu_usage/1e6, (double)runavg_cpu_usage/1e6);
+
+#if 0
+	/*
+	 * rusage statistics done by the parent, these are less
+	 * accurate than the sum_exec_runtime based statistics:
+	 */
+	printf(" [%0.2f / %0.2f]",
+		(double)parent_cpu_usage/1e6,
+		(double)runavg_parent_cpu_usage/1e6);
+#endif
+
+	printf("\n");
+
+	if (nr_sleep_corrections)
+		printf(" (%ld sleep corrections)\n", nr_sleep_corrections);
+	nr_sleep_corrections = 0;
+}
+
+static void test_calibrations(void)
+{
+	u64 T0, T1;
+
+	T0 = get_nsecs();
+	burn_nsecs(1e6);
+	T1 = get_nsecs();
+
+	printf("the run test took %Ld nsecs\n", T1-T0);
+
+	T0 = get_nsecs();
+	sleep_nsecs(1e6);
+	T1 = get_nsecs();
+
+	printf("the sleep test took %Ld nsecs\n", T1-T0);
+}
+
+static int
+process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	struct thread *thread;
+
+	thread = threads__findnew(event->comm.pid, &threads, &last_match);
+
+	dump_printf("%p [%p]: perf_event_comm: %s:%d\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->comm.comm, event->comm.pid);
+
+	if (thread == NULL ||
+	    thread__set_comm(thread, event->comm.comm)) {
+		dump_printf("problem processing perf_event_comm, skipping event.\n");
+		return -1;
+	}
+	total_comm++;
+
+	return 0;
+}
+
+
+struct raw_event_sample {
+	u32 size;
+	char data[0];
+};
+
+#define FILL_FIELD(ptr, field, event, data)	\
+	ptr.field = (typeof(ptr.field)) raw_field_value(event, #field, data)
+
+#define FILL_ARRAY(ptr, array, event, data)			\
+do {								\
+	void *__array = raw_field_ptr(event, #array, data);	\
+	memcpy(ptr.array, __array, sizeof(ptr.array));	\
+} while(0)
+
+#define FILL_COMMON_FIELDS(ptr, event, data)			\
+do {								\
+	FILL_FIELD(ptr, common_type, event, data);		\
+	FILL_FIELD(ptr, common_flags, event, data);		\
+	FILL_FIELD(ptr, common_preempt_count, event, data);	\
+	FILL_FIELD(ptr, common_pid, event, data);		\
+	FILL_FIELD(ptr, common_tgid, event, data);		\
+} while (0)
+
+
+
+struct trace_switch_event {
+	u32 size;
+
+	u16 common_type;
+	u8 common_flags;
+	u8 common_preempt_count;
+	u32 common_pid;
+	u32 common_tgid;
+
+	char prev_comm[16];
+	u32 prev_pid;
+	u32 prev_prio;
+	u64 prev_state;
+	char next_comm[16];
+	u32 next_pid;
+	u32 next_prio;
+};
+
+struct trace_runtime_event {
+	u32 size;
+
+	u16 common_type;
+	u8 common_flags;
+	u8 common_preempt_count;
+	u32 common_pid;
+	u32 common_tgid;
+
+	char comm[16];
+	u32 pid;
+	u64 runtime;
+	u64 vruntime;
+};
+
+struct trace_wakeup_event {
+	u32 size;
+
+	u16 common_type;
+	u8 common_flags;
+	u8 common_preempt_count;
+	u32 common_pid;
+	u32 common_tgid;
+
+	char comm[16];
+	u32 pid;
+
+	u32 prio;
+	u32 success;
+	u32 cpu;
+};
+
+struct trace_fork_event {
+	u32 size;
+
+	u16 common_type;
+	u8 common_flags;
+	u8 common_preempt_count;
+	u32 common_pid;
+	u32 common_tgid;
+
+	char parent_comm[16];
+	u32 parent_pid;
+	char child_comm[16];
+	u32 child_pid;
+};
+
+struct trace_sched_handler {
+	void (*switch_event)(struct trace_switch_event *,
+			     struct event *,
+			     int cpu,
+			     u64 timestamp,
+			     struct thread *thread);
+
+	void (*runtime_event)(struct trace_runtime_event *,
+			      struct event *,
+			      int cpu,
+			      u64 timestamp,
+			      struct thread *thread);
+
+	void (*wakeup_event)(struct trace_wakeup_event *,
+			     struct event *,
+			     int cpu,
+			     u64 timestamp,
+			     struct thread *thread);
+
+	void (*fork_event)(struct trace_fork_event *,
+			   struct event *,
+			   int cpu,
+			   u64 timestamp,
+			   struct thread *thread);
+};
+
+
+static void
+replay_wakeup_event(struct trace_wakeup_event *wakeup_event,
+		    struct event *event,
+		    int cpu __used,
+		    u64 timestamp __used,
+		    struct thread *thread __used)
+{
+	struct task_desc *waker, *wakee;
+
+	if (verbose) {
+		printf("sched_wakeup event %p\n", event);
+
+		printf(" ... pid %d woke up %s/%d\n",
+			wakeup_event->common_pid,
+			wakeup_event->comm,
+			wakeup_event->pid);
+	}
+
+	waker = register_pid(wakeup_event->common_pid, "<unknown>");
+	wakee = register_pid(wakeup_event->pid, wakeup_event->comm);
+
+	add_sched_event_wakeup(waker, timestamp, wakee);
+}
+
+static u64 cpu_last_switched[MAX_CPUS];
+
+static void
+replay_switch_event(struct trace_switch_event *switch_event,
+		    struct event *event,
+		    int cpu,
+		    u64 timestamp,
+		    struct thread *thread __used)
+{
+	struct task_desc *prev, *next;
+	u64 timestamp0;
+	s64 delta;
+
+	if (verbose)
+		printf("sched_switch event %p\n", event);
+
+	if (cpu >= MAX_CPUS || cpu < 0)
+		return;
+
+	timestamp0 = cpu_last_switched[cpu];
+	if (timestamp0)
+		delta = timestamp - timestamp0;
+	else
+		delta = 0;
+
+	if (delta < 0)
+		die("hm, delta: %Ld < 0 ?\n", delta);
+
+	if (verbose) {
+		printf(" ... switch from %s/%d to %s/%d [ran %Ld nsecs]\n",
+			switch_event->prev_comm, switch_event->prev_pid,
+			switch_event->next_comm, switch_event->next_pid,
+			delta);
+	}
+
+	prev = register_pid(switch_event->prev_pid, switch_event->prev_comm);
+	next = register_pid(switch_event->next_pid, switch_event->next_comm);
+
+	cpu_last_switched[cpu] = timestamp;
+
+	add_sched_event_run(prev, timestamp, delta);
+	add_sched_event_sleep(prev, timestamp, switch_event->prev_state);
+}
+
+
+static void
+replay_fork_event(struct trace_fork_event *fork_event,
+		  struct event *event,
+		  int cpu __used,
+		  u64 timestamp __used,
+		  struct thread *thread __used)
+{
+	if (verbose) {
+		printf("sched_fork event %p\n", event);
+		printf("... parent: %s/%d\n", fork_event->parent_comm, fork_event->parent_pid);
+		printf("...  child: %s/%d\n", fork_event->child_comm, fork_event->child_pid);
+	}
+	register_pid(fork_event->parent_pid, fork_event->parent_comm);
+	register_pid(fork_event->child_pid, fork_event->child_comm);
+}
+
+static struct trace_sched_handler replay_ops  = {
+	.wakeup_event		= replay_wakeup_event,
+	.switch_event		= replay_switch_event,
+	.fork_event		= replay_fork_event,
+};
+
+struct sort_dimension {
+	const char		*name;
+	sort_fn_t		cmp;
+	struct list_head	list;
+};
+
+static LIST_HEAD(cmp_pid);
+
+static int
+thread_lat_cmp(struct list_head *list, struct work_atoms *l, struct work_atoms *r)
+{
+	struct sort_dimension *sort;
+	int ret = 0;
+
+	BUG_ON(list_empty(list));
+
+	list_for_each_entry(sort, list, list) {
+		ret = sort->cmp(l, r);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static struct work_atoms *
+thread_atoms_search(struct rb_root *root, struct thread *thread,
+			 struct list_head *sort_list)
+{
+	struct rb_node *node = root->rb_node;
+	struct work_atoms key = { .thread = thread };
+
+	while (node) {
+		struct work_atoms *atoms;
+		int cmp;
+
+		atoms = container_of(node, struct work_atoms, node);
+
+		cmp = thread_lat_cmp(sort_list, &key, atoms);
+		if (cmp > 0)
+			node = node->rb_left;
+		else if (cmp < 0)
+			node = node->rb_right;
+		else {
+			BUG_ON(thread != atoms->thread);
+			return atoms;
+		}
+	}
+	return NULL;
+}
+
+static void
+__thread_latency_insert(struct rb_root *root, struct work_atoms *data,
+			 struct list_head *sort_list)
+{
+	struct rb_node **new = &(root->rb_node), *parent = NULL;
+
+	while (*new) {
+		struct work_atoms *this;
+		int cmp;
+
+		this = container_of(*new, struct work_atoms, node);
+		parent = *new;
+
+		cmp = thread_lat_cmp(sort_list, data, this);
+
+		if (cmp > 0)
+			new = &((*new)->rb_left);
+		else
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&data->node, parent, new);
+	rb_insert_color(&data->node, root);
+}
+
+static void thread_atoms_insert(struct thread *thread)
+{
+	struct work_atoms *atoms;
+
+	atoms = calloc(sizeof(*atoms), 1);
+	if (!atoms)
+		die("No memory");
+
+	atoms->thread = thread;
+	INIT_LIST_HEAD(&atoms->work_list);
+	__thread_latency_insert(&atom_root, atoms, &cmp_pid);
+}
+
+static void
+latency_fork_event(struct trace_fork_event *fork_event __used,
+		   struct event *event __used,
+		   int cpu __used,
+		   u64 timestamp __used,
+		   struct thread *thread __used)
+{
+	/* should insert the newcomer */
+}
+
+__used
+static char sched_out_state(struct trace_switch_event *switch_event)
+{
+	const char *str = TASK_STATE_TO_CHAR_STR;
+
+	return str[switch_event->prev_state];
+}
+
+static void
+add_sched_out_event(struct work_atoms *atoms,
+		    char run_state,
+		    u64 timestamp)
+{
+	struct work_atom *atom;
+
+	atom = calloc(sizeof(*atom), 1);
+	if (!atom)
+		die("Non memory");
+
+	atom->sched_out_time = timestamp;
+
+	if (run_state == 'R') {
+		atom->state = THREAD_WAIT_CPU;
+		atom->wake_up_time = atom->sched_out_time;
+	}
+
+	list_add_tail(&atom->list, &atoms->work_list);
+}
+
+static void
+add_runtime_event(struct work_atoms *atoms, u64 delta, u64 timestamp __used)
+{
+	struct work_atom *atom;
+
+	BUG_ON(list_empty(&atoms->work_list));
+
+	atom = list_entry(atoms->work_list.prev, struct work_atom, list);
+
+	atom->runtime += delta;
+	atoms->total_runtime += delta;
+}
+
+static void
+add_sched_in_event(struct work_atoms *atoms, u64 timestamp)
+{
+	struct work_atom *atom;
+	u64 delta;
+
+	if (list_empty(&atoms->work_list))
+		return;
+
+	atom = list_entry(atoms->work_list.prev, struct work_atom, list);
+
+	if (atom->state != THREAD_WAIT_CPU)
+		return;
+
+	if (timestamp < atom->wake_up_time) {
+		atom->state = THREAD_IGNORE;
+		return;
+	}
+
+	atom->state = THREAD_SCHED_IN;
+	atom->sched_in_time = timestamp;
+
+	delta = atom->sched_in_time - atom->wake_up_time;
+	atoms->total_lat += delta;
+	if (delta > atoms->max_lat)
+		atoms->max_lat = delta;
+	atoms->nb_atoms++;
+}
+
+static void
+latency_switch_event(struct trace_switch_event *switch_event,
+		     struct event *event __used,
+		     int cpu,
+		     u64 timestamp,
+		     struct thread *thread __used)
+{
+	struct work_atoms *out_events, *in_events;
+	struct thread *sched_out, *sched_in;
+	u64 timestamp0;
+	s64 delta;
+
+	BUG_ON(cpu >= MAX_CPUS || cpu < 0);
+
+	timestamp0 = cpu_last_switched[cpu];
+	cpu_last_switched[cpu] = timestamp;
+	if (timestamp0)
+		delta = timestamp - timestamp0;
+	else
+		delta = 0;
+
+	if (delta < 0)
+		die("hm, delta: %Ld < 0 ?\n", delta);
+
+
+	sched_out = threads__findnew(switch_event->prev_pid, &threads, &last_match);
+	sched_in = threads__findnew(switch_event->next_pid, &threads, &last_match);
+
+	out_events = thread_atoms_search(&atom_root, sched_out, &cmp_pid);
+	if (!out_events) {
+		thread_atoms_insert(sched_out);
+		out_events = thread_atoms_search(&atom_root, sched_out, &cmp_pid);
+		if (!out_events)
+			die("out-event: Internal tree error");
+	}
+	add_sched_out_event(out_events, sched_out_state(switch_event), timestamp);
+
+	in_events = thread_atoms_search(&atom_root, sched_in, &cmp_pid);
+	if (!in_events) {
+		thread_atoms_insert(sched_in);
+		in_events = thread_atoms_search(&atom_root, sched_in, &cmp_pid);
+		if (!in_events)
+			die("in-event: Internal tree error");
+		/*
+		 * Take came in we have not heard about yet,
+		 * add in an initial atom in runnable state:
+		 */
+		add_sched_out_event(in_events, 'R', timestamp);
+	}
+	add_sched_in_event(in_events, timestamp);
+}
+
+static void
+latency_runtime_event(struct trace_runtime_event *runtime_event,
+		     struct event *event __used,
+		     int cpu,
+		     u64 timestamp,
+		     struct thread *this_thread __used)
+{
+	struct work_atoms *atoms;
+	struct thread *thread;
+
+	BUG_ON(cpu >= MAX_CPUS || cpu < 0);
+
+	thread = threads__findnew(runtime_event->pid, &threads, &last_match);
+	atoms = thread_atoms_search(&atom_root, thread, &cmp_pid);
+	if (!atoms) {
+		thread_atoms_insert(thread);
+		atoms = thread_atoms_search(&atom_root, thread, &cmp_pid);
+		if (!atoms)
+			die("in-event: Internal tree error");
+		add_sched_out_event(atoms, 'R', timestamp);
+	}
+
+	add_runtime_event(atoms, runtime_event->runtime, timestamp);
+}
+
+static void
+latency_wakeup_event(struct trace_wakeup_event *wakeup_event,
+		     struct event *__event __used,
+		     int cpu __used,
+		     u64 timestamp,
+		     struct thread *thread __used)
+{
+	struct work_atoms *atoms;
+	struct work_atom *atom;
+	struct thread *wakee;
+
+	/* Note for later, it may be interesting to observe the failing cases */
+	if (!wakeup_event->success)
+		return;
+
+	wakee = threads__findnew(wakeup_event->pid, &threads, &last_match);
+	atoms = thread_atoms_search(&atom_root, wakee, &cmp_pid);
+	if (!atoms) {
+		thread_atoms_insert(wakee);
+		atoms = thread_atoms_search(&atom_root, wakee, &cmp_pid);
+		if (!atoms)
+			die("wakeup-event: Internal tree error");
+		add_sched_out_event(atoms, 'S', timestamp);
+	}
+
+	BUG_ON(list_empty(&atoms->work_list));
+
+	atom = list_entry(atoms->work_list.prev, struct work_atom, list);
+
+	if (atom->state != THREAD_SLEEPING)
+		nr_state_machine_bugs++;
+
+	nr_timestamps++;
+	if (atom->sched_out_time > timestamp) {
+		nr_unordered_timestamps++;
+		return;
+	}
+
+	atom->state = THREAD_WAIT_CPU;
+	atom->wake_up_time = timestamp;
+}
+
+static struct trace_sched_handler lat_ops  = {
+	.wakeup_event		= latency_wakeup_event,
+	.switch_event		= latency_switch_event,
+	.runtime_event		= latency_runtime_event,
+	.fork_event		= latency_fork_event,
+};
+
+static void output_lat_thread(struct work_atoms *work_list)
+{
+	int i;
+	int ret;
+	u64 avg;
+
+	if (!work_list->nb_atoms)
+		return;
+	/*
+	 * Ignore idle threads:
+	 */
+	if (!strcmp(work_list->thread->comm, "swapper"))
+		return;
+
+	all_runtime += work_list->total_runtime;
+	all_count += work_list->nb_atoms;
+
+	ret = printf("  %s:%d ", work_list->thread->comm, work_list->thread->pid);
+
+	for (i = 0; i < 24 - ret; i++)
+		printf(" ");
+
+	avg = work_list->total_lat / work_list->nb_atoms;
+
+	printf("|%11.3f ms |%9llu | avg:%9.3f ms | max:%9.3f ms |\n",
+	      (double)work_list->total_runtime / 1e6,
+		 work_list->nb_atoms, (double)avg / 1e6,
+		 (double)work_list->max_lat / 1e6);
+}
+
+static int pid_cmp(struct work_atoms *l, struct work_atoms *r)
+{
+	if (l->thread->pid < r->thread->pid)
+		return -1;
+	if (l->thread->pid > r->thread->pid)
+		return 1;
+
+	return 0;
+}
+
+static struct sort_dimension pid_sort_dimension = {
+	.name			= "pid",
+	.cmp			= pid_cmp,
+};
+
+static int avg_cmp(struct work_atoms *l, struct work_atoms *r)
+{
+	u64 avgl, avgr;
+
+	if (!l->nb_atoms)
+		return -1;
+
+	if (!r->nb_atoms)
+		return 1;
+
+	avgl = l->total_lat / l->nb_atoms;
+	avgr = r->total_lat / r->nb_atoms;
+
+	if (avgl < avgr)
+		return -1;
+	if (avgl > avgr)
+		return 1;
+
+	return 0;
+}
+
+static struct sort_dimension avg_sort_dimension = {
+	.name			= "avg",
+	.cmp			= avg_cmp,
+};
+
+static int max_cmp(struct work_atoms *l, struct work_atoms *r)
+{
+	if (l->max_lat < r->max_lat)
+		return -1;
+	if (l->max_lat > r->max_lat)
+		return 1;
+
+	return 0;
+}
+
+static struct sort_dimension max_sort_dimension = {
+	.name			= "max",
+	.cmp			= max_cmp,
+};
+
+static int switch_cmp(struct work_atoms *l, struct work_atoms *r)
+{
+	if (l->nb_atoms < r->nb_atoms)
+		return -1;
+	if (l->nb_atoms > r->nb_atoms)
+		return 1;
+
+	return 0;
+}
+
+static struct sort_dimension switch_sort_dimension = {
+	.name			= "switch",
+	.cmp			= switch_cmp,
+};
+
+static int runtime_cmp(struct work_atoms *l, struct work_atoms *r)
+{
+	if (l->total_runtime < r->total_runtime)
+		return -1;
+	if (l->total_runtime > r->total_runtime)
+		return 1;
+
+	return 0;
+}
+
+static struct sort_dimension runtime_sort_dimension = {
+	.name			= "runtime",
+	.cmp			= runtime_cmp,
+};
+
+static struct sort_dimension *available_sorts[] = {
+	&pid_sort_dimension,
+	&avg_sort_dimension,
+	&max_sort_dimension,
+	&switch_sort_dimension,
+	&runtime_sort_dimension,
+};
+
+#define NB_AVAILABLE_SORTS	(int)(sizeof(available_sorts) / sizeof(struct sort_dimension *))
+
+static LIST_HEAD(sort_list);
+
+static int sort_dimension__add(char *tok, struct list_head *list)
+{
+	int i;
+
+	for (i = 0; i < NB_AVAILABLE_SORTS; i++) {
+		if (!strcmp(available_sorts[i]->name, tok)) {
+			list_add_tail(&available_sorts[i]->list, list);
+
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+static void setup_sorting(void);
+
+static void sort_lat(void)
+{
+	struct rb_node *node;
+
+	for (;;) {
+		struct work_atoms *data;
+		node = rb_first(&atom_root);
+		if (!node)
+			break;
+
+		rb_erase(node, &atom_root);
+		data = rb_entry(node, struct work_atoms, node);
+		__thread_latency_insert(&sorted_atom_root, data, &sort_list);
+	}
+}
+
+static struct trace_sched_handler *trace_handler;
+
+static void
+process_sched_wakeup_event(struct raw_event_sample *raw,
+			   struct event *event,
+			   int cpu __used,
+			   u64 timestamp __used,
+			   struct thread *thread __used)
+{
+	struct trace_wakeup_event wakeup_event;
+
+	FILL_COMMON_FIELDS(wakeup_event, event, raw->data);
+
+	FILL_ARRAY(wakeup_event, comm, event, raw->data);
+	FILL_FIELD(wakeup_event, pid, event, raw->data);
+	FILL_FIELD(wakeup_event, prio, event, raw->data);
+	FILL_FIELD(wakeup_event, success, event, raw->data);
+	FILL_FIELD(wakeup_event, cpu, event, raw->data);
+
+	if (trace_handler->wakeup_event)
+		trace_handler->wakeup_event(&wakeup_event, event, cpu, timestamp, thread);
+}
+
+/*
+ * Track the current task - that way we can know whether there's any
+ * weird events, such as a task being switched away that is not current.
+ */
+static int max_cpu;
+
+static u32 curr_pid[MAX_CPUS] = { [0 ... MAX_CPUS-1] = -1 };
+
+static struct thread *curr_thread[MAX_CPUS];
+
+static char next_shortname1 = 'A';
+static char next_shortname2 = '0';
+
+static void
+map_switch_event(struct trace_switch_event *switch_event,
+		 struct event *event __used,
+		 int this_cpu,
+		 u64 timestamp,
+		 struct thread *thread __used)
+{
+	struct thread *sched_out, *sched_in;
+	int new_shortname;
+	u64 timestamp0;
+	s64 delta;
+	int cpu;
+
+	BUG_ON(this_cpu >= MAX_CPUS || this_cpu < 0);
+
+	if (this_cpu > max_cpu)
+		max_cpu = this_cpu;
+
+	timestamp0 = cpu_last_switched[this_cpu];
+	cpu_last_switched[this_cpu] = timestamp;
+	if (timestamp0)
+		delta = timestamp - timestamp0;
+	else
+		delta = 0;
+
+	if (delta < 0)
+		die("hm, delta: %Ld < 0 ?\n", delta);
+
+
+	sched_out = threads__findnew(switch_event->prev_pid, &threads, &last_match);
+	sched_in = threads__findnew(switch_event->next_pid, &threads, &last_match);
+
+	curr_thread[this_cpu] = sched_in;
+
+	printf("  ");
+
+	new_shortname = 0;
+	if (!sched_in->shortname[0]) {
+		sched_in->shortname[0] = next_shortname1;
+		sched_in->shortname[1] = next_shortname2;
+
+		if (next_shortname1 < 'Z') {
+			next_shortname1++;
+		} else {
+			next_shortname1='A';
+			if (next_shortname2 < '9') {
+				next_shortname2++;
+			} else {
+				next_shortname2='0';
+			}
+		}
+		new_shortname = 1;
+	}
+
+	for (cpu = 0; cpu <= max_cpu; cpu++) {
+		if (cpu != this_cpu)
+			printf(" ");
+		else
+			printf("*");
+
+		if (curr_thread[cpu]) {
+			if (curr_thread[cpu]->pid)
+				printf("%2s ", curr_thread[cpu]->shortname);
+			else
+				printf(".  ");
+		} else
+			printf("   ");
+	}
+
+	printf("  %12.6f secs ", (double)timestamp/1e9);
+	if (new_shortname) {
+		printf("%s => %s:%d\n",
+			sched_in->shortname, sched_in->comm, sched_in->pid);
+	} else {
+		printf("\n");
+	}
+}
+
+
+static void
+process_sched_switch_event(struct raw_event_sample *raw,
+			   struct event *event,
+			   int this_cpu,
+			   u64 timestamp __used,
+			   struct thread *thread __used)
+{
+	struct trace_switch_event switch_event;
+
+	FILL_COMMON_FIELDS(switch_event, event, raw->data);
+
+	FILL_ARRAY(switch_event, prev_comm, event, raw->data);
+	FILL_FIELD(switch_event, prev_pid, event, raw->data);
+	FILL_FIELD(switch_event, prev_prio, event, raw->data);
+	FILL_FIELD(switch_event, prev_state, event, raw->data);
+	FILL_ARRAY(switch_event, next_comm, event, raw->data);
+	FILL_FIELD(switch_event, next_pid, event, raw->data);
+	FILL_FIELD(switch_event, next_prio, event, raw->data);
+
+	if (curr_pid[this_cpu] != (u32)-1) {
+		/*
+		 * Are we trying to switch away a PID that is
+		 * not current?
+		 */
+		if (curr_pid[this_cpu] != switch_event.prev_pid)
+			nr_context_switch_bugs++;
+	}
+	if (trace_handler->switch_event)
+		trace_handler->switch_event(&switch_event, event, this_cpu, timestamp, thread);
+
+	curr_pid[this_cpu] = switch_event.next_pid;
+}
+
+static void
+process_sched_runtime_event(struct raw_event_sample *raw,
+			   struct event *event,
+			   int cpu __used,
+			   u64 timestamp __used,
+			   struct thread *thread __used)
+{
+	struct trace_runtime_event runtime_event;
+
+	FILL_ARRAY(runtime_event, comm, event, raw->data);
+	FILL_FIELD(runtime_event, pid, event, raw->data);
+	FILL_FIELD(runtime_event, runtime, event, raw->data);
+	FILL_FIELD(runtime_event, vruntime, event, raw->data);
+
+	if (trace_handler->runtime_event)
+		trace_handler->runtime_event(&runtime_event, event, cpu, timestamp, thread);
+}
+
+static void
+process_sched_fork_event(struct raw_event_sample *raw,
+			 struct event *event,
+			 int cpu __used,
+			 u64 timestamp __used,
+			 struct thread *thread __used)
+{
+	struct trace_fork_event fork_event;
+
+	FILL_COMMON_FIELDS(fork_event, event, raw->data);
+
+	FILL_ARRAY(fork_event, parent_comm, event, raw->data);
+	FILL_FIELD(fork_event, parent_pid, event, raw->data);
+	FILL_ARRAY(fork_event, child_comm, event, raw->data);
+	FILL_FIELD(fork_event, child_pid, event, raw->data);
+
+	if (trace_handler->fork_event)
+		trace_handler->fork_event(&fork_event, event, cpu, timestamp, thread);
+}
+
+static void
+process_sched_exit_event(struct event *event,
+			 int cpu __used,
+			 u64 timestamp __used,
+			 struct thread *thread __used)
+{
+	if (verbose)
+		printf("sched_exit event %p\n", event);
+}
+
+static void
+process_raw_event(event_t *raw_event __used, void *more_data,
+		  int cpu, u64 timestamp, struct thread *thread)
+{
+	struct raw_event_sample *raw = more_data;
+	struct event *event;
+	int type;
+
+	type = trace_parse_common_type(raw->data);
+	event = trace_find_event(type);
+
+	if (!strcmp(event->name, "sched_switch"))
+		process_sched_switch_event(raw, event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_stat_runtime"))
+		process_sched_runtime_event(raw, event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_wakeup"))
+		process_sched_wakeup_event(raw, event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_wakeup_new"))
+		process_sched_wakeup_event(raw, event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_process_fork"))
+		process_sched_fork_event(raw, event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_process_exit"))
+		process_sched_exit_event(event, cpu, timestamp, thread);
+}
+
+static int
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	char level;
+	int show = 0;
+	struct dso *dso = NULL;
+	struct thread *thread;
+	u64 ip = event->ip.ip;
+	u64 timestamp = -1;
+	u32 cpu = -1;
+	u64 period = 1;
+	void *more_data = event->ip.__more_data;
+	int cpumode;
+
+	thread = threads__findnew(event->ip.pid, &threads, &last_match);
+
+	if (sample_type & PERF_SAMPLE_TIME) {
+		timestamp = *(u64 *)more_data;
+		more_data += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_CPU) {
+		cpu = *(u32 *)more_data;
+		more_data += sizeof(u32);
+		more_data += sizeof(u32); /* reserved */
+	}
+
+	if (sample_type & PERF_SAMPLE_PERIOD) {
+		period = *(u64 *)more_data;
+		more_data += sizeof(u64);
+	}
+
+	dump_printf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
+		(void *)(offset + head),
+		(void *)(long)(event->header.size),
+		event->header.misc,
+		event->ip.pid, event->ip.tid,
+		(void *)(long)ip,
+		(long long)period);
+
+	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+	if (thread == NULL) {
+		eprintf("problem processing %d event, skipping it.\n",
+			event->header.type);
+		return -1;
+	}
+
+	cpumode = event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK;
+
+	if (cpumode == PERF_EVENT_MISC_KERNEL) {
+		show = SHOW_KERNEL;
+		level = 'k';
+
+		dso = kernel_dso;
+
+		dump_printf(" ...... dso: %s\n", dso->name);
+
+	} else if (cpumode == PERF_EVENT_MISC_USER) {
+
+		show = SHOW_USER;
+		level = '.';
+
+	} else {
+		show = SHOW_HV;
+		level = 'H';
+
+		dso = hypervisor_dso;
+
+		dump_printf(" ...... dso: [hypervisor]\n");
+	}
+
+	if (sample_type & PERF_SAMPLE_RAW)
+		process_raw_event(event, more_data, cpu, timestamp, thread);
+
+	return 0;
+}
+
+static int
+process_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	trace_event(event);
+
+	nr_events++;
+	switch (event->header.type) {
+	case PERF_EVENT_MMAP:
+		return 0;
+	case PERF_EVENT_LOST:
+		nr_lost_chunks++;
+		nr_lost_events += event->lost.lost;
+		return 0;
+
+	case PERF_EVENT_COMM:
+		return process_comm_event(event, offset, head);
+
+	case PERF_EVENT_EXIT ... PERF_EVENT_READ:
+		return 0;
+
+	case PERF_EVENT_SAMPLE:
+		return process_sample_event(event, offset, head);
+
+	case PERF_EVENT_MAX:
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static int read_events(void)
+{
+	int ret, rc = EXIT_FAILURE;
+	unsigned long offset = 0;
+	unsigned long head = 0;
+	struct stat perf_stat;
+	event_t *event;
+	uint32_t size;
+	char *buf;
+
+	trace_report();
+	register_idle_thread(&threads, &last_match);
+
+	input = open(input_name, O_RDONLY);
+	if (input < 0) {
+		perror("failed to open file");
+		exit(-1);
+	}
+
+	ret = fstat(input, &perf_stat);
+	if (ret < 0) {
+		perror("failed to stat file");
+		exit(-1);
+	}
+
+	if (!perf_stat.st_size) {
+		fprintf(stderr, "zero-sized file, nothing to do!\n");
+		exit(0);
+	}
+	header = perf_header__read(input);
+	head = header->data_offset;
+	sample_type = perf_header__sample_type(header);
+
+	if (!(sample_type & PERF_SAMPLE_RAW))
+		die("No trace sample to read. Did you call perf record "
+		    "without -R?");
+
+	if (load_kernel() < 0) {
+		perror("failed to load kernel symbols");
+		return EXIT_FAILURE;
+	}
+
+remap:
+	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
+			   MAP_SHARED, input, offset);
+	if (buf == MAP_FAILED) {
+		perror("failed to mmap file");
+		exit(-1);
+	}
+
+more:
+	event = (event_t *)(buf + head);
+
+	size = event->header.size;
+	if (!size)
+		size = 8;
+
+	if (head + event->header.size >= page_size * mmap_window) {
+		unsigned long shift = page_size * (head / page_size);
+		int res;
+
+		res = munmap(buf, page_size * mmap_window);
+		assert(res == 0);
+
+		offset += shift;
+		head -= shift;
+		goto remap;
+	}
+
+	size = event->header.size;
+
+
+	if (!size || process_event(event, offset, head) < 0) {
+
+		/*
+		 * assume we lost track of the stream, check alignment, and
+		 * increment a single u64 in the hope to catch on again 'soon'.
+		 */
+
+		if (unlikely(head & 7))
+			head &= ~7ULL;
+
+		size = 8;
+	}
+
+	head += size;
+
+	if (offset + head < (unsigned long)perf_stat.st_size)
+		goto more;
+
+	rc = EXIT_SUCCESS;
+	close(input);
+
+	return rc;
+}
+
+static void print_bad_events(void)
+{
+	if (nr_unordered_timestamps && nr_timestamps) {
+		printf("  INFO: %.3f%% unordered timestamps (%ld out of %ld)\n",
+			(double)nr_unordered_timestamps/(double)nr_timestamps*100.0,
+			nr_unordered_timestamps, nr_timestamps);
+	}
+	if (nr_lost_events && nr_events) {
+		printf("  INFO: %.3f%% lost events (%ld out of %ld, in %ld chunks)\n",
+			(double)nr_lost_events/(double)nr_events*100.0,
+			nr_lost_events, nr_events, nr_lost_chunks);
+	}
+	if (nr_state_machine_bugs && nr_timestamps) {
+		printf("  INFO: %.3f%% state machine bugs (%ld out of %ld)",
+			(double)nr_state_machine_bugs/(double)nr_timestamps*100.0,
+			nr_state_machine_bugs, nr_timestamps);
+		if (nr_lost_events)
+			printf(" (due to lost events?)");
+		printf("\n");
+	}
+	if (nr_context_switch_bugs && nr_timestamps) {
+		printf("  INFO: %.3f%% context switch bugs (%ld out of %ld)",
+			(double)nr_context_switch_bugs/(double)nr_timestamps*100.0,
+			nr_context_switch_bugs, nr_timestamps);
+		if (nr_lost_events)
+			printf(" (due to lost events?)");
+		printf("\n");
+	}
+}
+
+static void __cmd_lat(void)
+{
+	struct rb_node *next;
+
+	setup_pager();
+	read_events();
+	sort_lat();
+
+	printf("\n -----------------------------------------------------------------------------------------\n");
+	printf("  Task                  |   Runtime ms  | Switches | Average delay ms | Maximum delay ms |\n");
+	printf(" -----------------------------------------------------------------------------------------\n");
+
+	next = rb_first(&sorted_atom_root);
+
+	while (next) {
+		struct work_atoms *work_list;
+
+		work_list = rb_entry(next, struct work_atoms, node);
+		output_lat_thread(work_list);
+		next = rb_next(next);
+	}
+
+	printf(" -----------------------------------------------------------------------------------------\n");
+	printf("  TOTAL:                |%11.3f ms |%9Ld |\n",
+		(double)all_runtime/1e6, all_count);
+
+	printf(" ---------------------------------------------------\n");
+
+	print_bad_events();
+	printf("\n");
+
+}
+
+static struct trace_sched_handler map_ops  = {
+	.wakeup_event		= NULL,
+	.switch_event		= map_switch_event,
+	.runtime_event		= NULL,
+	.fork_event		= NULL,
+};
+
+static void __cmd_map(void)
+{
+	max_cpu = sysconf(_SC_NPROCESSORS_CONF);
+
+	setup_pager();
+	read_events();
+	print_bad_events();
+}
+
+static void __cmd_replay(void)
+{
+	unsigned long i;
+
+	calibrate_run_measurement_overhead();
+	calibrate_sleep_measurement_overhead();
+
+	test_calibrations();
+
+	read_events();
+
+	printf("nr_run_events:        %ld\n", nr_run_events);
+	printf("nr_sleep_events:      %ld\n", nr_sleep_events);
+	printf("nr_wakeup_events:     %ld\n", nr_wakeup_events);
+
+	if (targetless_wakeups)
+		printf("target-less wakeups:  %ld\n", targetless_wakeups);
+	if (multitarget_wakeups)
+		printf("multi-target wakeups: %ld\n", multitarget_wakeups);
+	if (nr_run_events_optimized)
+		printf("run atoms optimized: %ld\n",
+			nr_run_events_optimized);
+
+	print_task_traces();
+	add_cross_task_wakeups();
+
+	create_tasks();
+	printf("------------------------------------------------------------\n");
+	for (i = 0; i < replay_repeat; i++)
+		run_one_test();
+}
+
+
+static const char * const sched_usage[] = {
+	"perf sched [<options>] {record|latency|map|replay|trace}",
+	NULL
+};
+
+static const struct option sched_options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		    "input file name"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_END()
+};
+
+static const char * const latency_usage[] = {
+	"perf sched latency [<options>]",
+	NULL
+};
+
+static const struct option latency_options[] = {
+	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
+		   "sort by key(s): runtime, switch, avg, max"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_END()
+};
+
+static const char * const replay_usage[] = {
+	"perf sched replay [<options>]",
+	NULL
+};
+
+static const struct option replay_options[] = {
+	OPT_INTEGER('r', "repeat", &replay_repeat,
+		    "repeat the workload replay N times (-1: infinite)"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_END()
+};
+
+static void setup_sorting(void)
+{
+	char *tmp, *tok, *str = strdup(sort_order);
+
+	for (tok = strtok_r(str, ", ", &tmp);
+			tok; tok = strtok_r(NULL, ", ", &tmp)) {
+		if (sort_dimension__add(tok, &sort_list) < 0) {
+			error("Unknown --sort key: `%s'", tok);
+			usage_with_options(latency_usage, latency_options);
+		}
+	}
+
+	free(str);
+
+	sort_dimension__add((char *)"pid", &cmp_pid);
+}
+
+static const char *record_args[] = {
+	"record",
+	"-a",
+	"-R",
+	"-M",
+	"-f",
+	"-m", "1024",
+	"-c", "1",
+	"-e", "sched:sched_switch:r",
+	"-e", "sched:sched_stat_wait:r",
+	"-e", "sched:sched_stat_sleep:r",
+	"-e", "sched:sched_stat_iowait:r",
+	"-e", "sched:sched_stat_runtime:r",
+	"-e", "sched:sched_process_exit:r",
+	"-e", "sched:sched_process_fork:r",
+	"-e", "sched:sched_wakeup:r",
+	"-e", "sched:sched_migrate_task:r",
+};
+
+static int __cmd_record(int argc, const char **argv)
+{
+	unsigned int rec_argc, i, j;
+	const char **rec_argv;
+
+	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
+	rec_argv = calloc(rec_argc + 1, sizeof(char *));
+
+	for (i = 0; i < ARRAY_SIZE(record_args); i++)
+		rec_argv[i] = strdup(record_args[i]);
+
+	for (j = 1; j < (unsigned int)argc; j++, i++)
+		rec_argv[i] = argv[j];
+
+	BUG_ON(i != rec_argc);
+
+	return cmd_record(i, rec_argv, NULL);
+}
+
+int cmd_sched(int argc, const char **argv, const char *prefix __used)
+{
+	symbol__init();
+	page_size = getpagesize();
+
+	argc = parse_options(argc, argv, sched_options, sched_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+	if (!argc)
+		usage_with_options(sched_usage, sched_options);
+
+	if (!strncmp(argv[0], "rec", 3)) {
+		return __cmd_record(argc, argv);
+	} else if (!strncmp(argv[0], "lat", 3)) {
+		trace_handler = &lat_ops;
+		if (argc > 1) {
+			argc = parse_options(argc, argv, latency_options, latency_usage, 0);
+			if (argc)
+				usage_with_options(latency_usage, latency_options);
+		}
+		setup_sorting();
+		__cmd_lat();
+	} else if (!strcmp(argv[0], "map")) {
+		trace_handler = &map_ops;
+		setup_sorting();
+		__cmd_map();
+	} else if (!strncmp(argv[0], "rep", 3)) {
+		trace_handler = &replay_ops;
+		if (argc) {
+			argc = parse_options(argc, argv, replay_options, replay_usage, 0);
+			if (argc)
+				usage_with_options(replay_usage, replay_options);
+		}
+		__cmd_replay();
+	} else if (!strcmp(argv[0], "trace")) {
+		/*
+		 * Aliased to 'perf trace' for now:
+		 */
+		return cmd_trace(argc, argv, prefix);
+	} else {
+		usage_with_options(sched_usage, sched_options);
+	}
+
+	return 0;
+}
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
new file mode 100644
index 0000000..58d737e
--- /dev/null
+++ b/tools/perf/builtin-timechart.c
@@ -0,0 +1,1151 @@
+/*
+ * builtin-timechart.c - make an svg timechart of system activity
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * Authors:
+ *     Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include "builtin.h"
+
+#include "util/util.h"
+
+#include "util/color.h"
+#include <linux/list.h>
+#include "util/cache.h"
+#include <linux/rbtree.h>
+#include "util/symbol.h"
+#include "util/string.h"
+#include "util/callchain.h"
+#include "util/strlist.h"
+
+#include "perf.h"
+#include "util/header.h"
+#include "util/parse-options.h"
+#include "util/parse-events.h"
+#include "util/svghelper.h"
+
+static char		const *input_name = "perf.data";
+static char		const *output_name = "output.svg";
+
+
+static unsigned long	page_size;
+static unsigned long	mmap_window = 32;
+static u64		sample_type;
+
+static unsigned int	numcpus;
+static u64		min_freq;	/* Lowest CPU frequency seen */
+static u64		max_freq;	/* Highest CPU frequency seen */
+static u64		turbo_frequency;
+
+static u64		first_time, last_time;
+
+
+static struct perf_header	*header;
+
+struct per_pid;
+struct per_pidcomm;
+
+struct cpu_sample;
+struct power_event;
+struct wake_event;
+
+struct sample_wrapper;
+
+/*
+ * Datastructure layout:
+ * We keep an list of "pid"s, matching the kernels notion of a task struct.
+ * Each "pid" entry, has a list of "comm"s.
+ *	this is because we want to track different programs different, while
+ *	exec will reuse the original pid (by design).
+ * Each comm has a list of samples that will be used to draw
+ * final graph.
+ */
+
+struct per_pid {
+	struct per_pid *next;
+
+	int		pid;
+	int		ppid;
+
+	u64		start_time;
+	u64		end_time;
+	u64		total_time;
+	int		display;
+
+	struct per_pidcomm *all;
+	struct per_pidcomm *current;
+
+	int painted;
+};
+
+
+struct per_pidcomm {
+	struct per_pidcomm *next;
+
+	u64		start_time;
+	u64		end_time;
+	u64		total_time;
+
+	int		Y;
+	int		display;
+
+	long		state;
+	u64		state_since;
+
+	char		*comm;
+
+	struct cpu_sample *samples;
+};
+
+struct sample_wrapper {
+	struct sample_wrapper *next;
+
+	u64		timestamp;
+	unsigned char	data[0];
+};
+
+#define TYPE_NONE	0
+#define TYPE_RUNNING	1
+#define TYPE_WAITING	2
+#define TYPE_BLOCKED	3
+
+struct cpu_sample {
+	struct cpu_sample *next;
+
+	u64 start_time;
+	u64 end_time;
+	int type;
+	int cpu;
+};
+
+static struct per_pid *all_data;
+
+#define CSTATE 1
+#define PSTATE 2
+
+struct power_event {
+	struct power_event *next;
+	int type;
+	int state;
+	u64 start_time;
+	u64 end_time;
+	int cpu;
+};
+
+struct wake_event {
+	struct wake_event *next;
+	int waker;
+	int wakee;
+	u64 time;
+};
+
+static struct power_event    *power_events;
+static struct wake_event     *wake_events;
+
+struct sample_wrapper *all_samples;
+
+static struct per_pid *find_create_pid(int pid)
+{
+	struct per_pid *cursor = all_data;
+
+	while (cursor) {
+		if (cursor->pid == pid)
+			return cursor;
+		cursor = cursor->next;
+	}
+	cursor = malloc(sizeof(struct per_pid));
+	assert(cursor != NULL);
+	memset(cursor, 0, sizeof(struct per_pid));
+	cursor->pid = pid;
+	cursor->next = all_data;
+	all_data = cursor;
+	return cursor;
+}
+
+static void pid_set_comm(int pid, char *comm)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	p = find_create_pid(pid);
+	c = p->all;
+	while (c) {
+		if (c->comm && strcmp(c->comm, comm) == 0) {
+			p->current = c;
+			return;
+		}
+		if (!c->comm) {
+			c->comm = strdup(comm);
+			p->current = c;
+			return;
+		}
+		c = c->next;
+	}
+	c = malloc(sizeof(struct per_pidcomm));
+	assert(c != NULL);
+	memset(c, 0, sizeof(struct per_pidcomm));
+	c->comm = strdup(comm);
+	p->current = c;
+	c->next = p->all;
+	p->all = c;
+}
+
+static void pid_fork(int pid, int ppid, u64 timestamp)
+{
+	struct per_pid *p, *pp;
+	p = find_create_pid(pid);
+	pp = find_create_pid(ppid);
+	p->ppid = ppid;
+	if (pp->current && pp->current->comm && !p->current)
+		pid_set_comm(pid, pp->current->comm);
+
+	p->start_time = timestamp;
+	if (p->current) {
+		p->current->start_time = timestamp;
+		p->current->state_since = timestamp;
+	}
+}
+
+static void pid_exit(int pid, u64 timestamp)
+{
+	struct per_pid *p;
+	p = find_create_pid(pid);
+	p->end_time = timestamp;
+	if (p->current)
+		p->current->end_time = timestamp;
+}
+
+static void
+pid_put_sample(int pid, int type, unsigned int cpu, u64 start, u64 end)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	struct cpu_sample *sample;
+
+	p = find_create_pid(pid);
+	c = p->current;
+	if (!c) {
+		c = malloc(sizeof(struct per_pidcomm));
+		assert(c != NULL);
+		memset(c, 0, sizeof(struct per_pidcomm));
+		p->current = c;
+		c->next = p->all;
+		p->all = c;
+	}
+
+	sample = malloc(sizeof(struct cpu_sample));
+	assert(sample != NULL);
+	memset(sample, 0, sizeof(struct cpu_sample));
+	sample->start_time = start;
+	sample->end_time = end;
+	sample->type = type;
+	sample->next = c->samples;
+	sample->cpu = cpu;
+	c->samples = sample;
+
+	if (sample->type == TYPE_RUNNING && end > start && start > 0) {
+		c->total_time += (end-start);
+		p->total_time += (end-start);
+	}
+
+	if (c->start_time == 0 || c->start_time > start)
+		c->start_time = start;
+	if (p->start_time == 0 || p->start_time > start)
+		p->start_time = start;
+
+	if (cpu > numcpus)
+		numcpus = cpu;
+}
+
+#define MAX_CPUS 4096
+
+static u64 cpus_cstate_start_times[MAX_CPUS];
+static int cpus_cstate_state[MAX_CPUS];
+static u64 cpus_pstate_start_times[MAX_CPUS];
+static u64 cpus_pstate_state[MAX_CPUS];
+
+static int
+process_comm_event(event_t *event)
+{
+	pid_set_comm(event->comm.pid, event->comm.comm);
+	return 0;
+}
+static int
+process_fork_event(event_t *event)
+{
+	pid_fork(event->fork.pid, event->fork.ppid, event->fork.time);
+	return 0;
+}
+
+static int
+process_exit_event(event_t *event)
+{
+	pid_exit(event->fork.pid, event->fork.time);
+	return 0;
+}
+
+struct trace_entry {
+	u32			size;
+	unsigned short		type;
+	unsigned char		flags;
+	unsigned char		preempt_count;
+	int			pid;
+	int			tgid;
+};
+
+struct power_entry {
+	struct trace_entry te;
+	s64	type;
+	s64	value;
+};
+
+#define TASK_COMM_LEN 16
+struct wakeup_entry {
+	struct trace_entry te;
+	char comm[TASK_COMM_LEN];
+	int   pid;
+	int   prio;
+	int   success;
+};
+
+/*
+ * trace_flag_type is an enumeration that holds different
+ * states when a trace occurs. These are:
+ *  IRQS_OFF            - interrupts were disabled
+ *  IRQS_NOSUPPORT      - arch does not support irqs_disabled_flags
+ *  NEED_RESCED         - reschedule is requested
+ *  HARDIRQ             - inside an interrupt handler
+ *  SOFTIRQ             - inside a softirq handler
+ */
+enum trace_flag_type {
+	TRACE_FLAG_IRQS_OFF		= 0x01,
+	TRACE_FLAG_IRQS_NOSUPPORT	= 0x02,
+	TRACE_FLAG_NEED_RESCHED		= 0x04,
+	TRACE_FLAG_HARDIRQ		= 0x08,
+	TRACE_FLAG_SOFTIRQ		= 0x10,
+};
+
+
+
+struct sched_switch {
+	struct trace_entry te;
+	char prev_comm[TASK_COMM_LEN];
+	int  prev_pid;
+	int  prev_prio;
+	long prev_state; /* Arjan weeps. */
+	char next_comm[TASK_COMM_LEN];
+	int  next_pid;
+	int  next_prio;
+};
+
+static void c_state_start(int cpu, u64 timestamp, int state)
+{
+	cpus_cstate_start_times[cpu] = timestamp;
+	cpus_cstate_state[cpu] = state;
+}
+
+static void c_state_end(int cpu, u64 timestamp)
+{
+	struct power_event *pwr;
+	pwr = malloc(sizeof(struct power_event));
+	if (!pwr)
+		return;
+	memset(pwr, 0, sizeof(struct power_event));
+
+	pwr->state = cpus_cstate_state[cpu];
+	pwr->start_time = cpus_cstate_start_times[cpu];
+	pwr->end_time = timestamp;
+	pwr->cpu = cpu;
+	pwr->type = CSTATE;
+	pwr->next = power_events;
+
+	power_events = pwr;
+}
+
+static void p_state_change(int cpu, u64 timestamp, u64 new_freq)
+{
+	struct power_event *pwr;
+	pwr = malloc(sizeof(struct power_event));
+
+	if (new_freq > 8000000) /* detect invalid data */
+		return;
+
+	if (!pwr)
+		return;
+	memset(pwr, 0, sizeof(struct power_event));
+
+	pwr->state = cpus_pstate_state[cpu];
+	pwr->start_time = cpus_pstate_start_times[cpu];
+	pwr->end_time = timestamp;
+	pwr->cpu = cpu;
+	pwr->type = PSTATE;
+	pwr->next = power_events;
+
+	if (!pwr->start_time)
+		pwr->start_time = first_time;
+
+	power_events = pwr;
+
+	cpus_pstate_state[cpu] = new_freq;
+	cpus_pstate_start_times[cpu] = timestamp;
+
+	if ((u64)new_freq > max_freq)
+		max_freq = new_freq;
+
+	if (new_freq < min_freq || min_freq == 0)
+		min_freq = new_freq;
+
+	if (new_freq == max_freq - 1000)
+			turbo_frequency = max_freq;
+}
+
+static void
+sched_wakeup(int cpu, u64 timestamp, int pid, struct trace_entry *te)
+{
+	struct wake_event *we;
+	struct per_pid *p;
+	struct wakeup_entry *wake = (void *)te;
+
+	we = malloc(sizeof(struct wake_event));
+	if (!we)
+		return;
+
+	memset(we, 0, sizeof(struct wake_event));
+	we->time = timestamp;
+	we->waker = pid;
+
+	if ((te->flags & TRACE_FLAG_HARDIRQ) || (te->flags & TRACE_FLAG_SOFTIRQ))
+		we->waker = -1;
+
+	we->wakee = wake->pid;
+	we->next = wake_events;
+	wake_events = we;
+	p = find_create_pid(we->wakee);
+
+	if (p && p->current && p->current->state == TYPE_NONE) {
+		p->current->state_since = timestamp;
+		p->current->state = TYPE_WAITING;
+	}
+	if (p && p->current && p->current->state == TYPE_BLOCKED) {
+		pid_put_sample(p->pid, p->current->state, cpu, p->current->state_since, timestamp);
+		p->current->state_since = timestamp;
+		p->current->state = TYPE_WAITING;
+	}
+}
+
+static void sched_switch(int cpu, u64 timestamp, struct trace_entry *te)
+{
+	struct per_pid *p = NULL, *prev_p;
+	struct sched_switch *sw = (void *)te;
+
+
+	prev_p = find_create_pid(sw->prev_pid);
+
+	p = find_create_pid(sw->next_pid);
+
+	if (prev_p->current && prev_p->current->state != TYPE_NONE)
+		pid_put_sample(sw->prev_pid, TYPE_RUNNING, cpu, prev_p->current->state_since, timestamp);
+	if (p && p->current) {
+		if (p->current->state != TYPE_NONE)
+			pid_put_sample(sw->next_pid, p->current->state, cpu, p->current->state_since, timestamp);
+
+			p->current->state_since = timestamp;
+			p->current->state = TYPE_RUNNING;
+	}
+
+	if (prev_p->current) {
+		prev_p->current->state = TYPE_NONE;
+		prev_p->current->state_since = timestamp;
+		if (sw->prev_state & 2)
+			prev_p->current->state = TYPE_BLOCKED;
+		if (sw->prev_state == 0)
+			prev_p->current->state = TYPE_WAITING;
+	}
+}
+
+
+static int
+process_sample_event(event_t *event)
+{
+	int cursor = 0;
+	u64 addr = 0;
+	u64 stamp = 0;
+	u32 cpu = 0;
+	u32 pid = 0;
+	struct trace_entry *te;
+
+	if (sample_type & PERF_SAMPLE_IP)
+		cursor++;
+
+	if (sample_type & PERF_SAMPLE_TID) {
+		pid = event->sample.array[cursor]>>32;
+		cursor++;
+	}
+	if (sample_type & PERF_SAMPLE_TIME) {
+		stamp = event->sample.array[cursor++];
+
+		if (!first_time || first_time > stamp)
+			first_time = stamp;
+		if (last_time < stamp)
+			last_time = stamp;
+
+	}
+	if (sample_type & PERF_SAMPLE_ADDR)
+		addr = event->sample.array[cursor++];
+	if (sample_type & PERF_SAMPLE_ID)
+		cursor++;
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
+		cursor++;
+	if (sample_type & PERF_SAMPLE_CPU)
+		cpu = event->sample.array[cursor++] & 0xFFFFFFFF;
+	if (sample_type & PERF_SAMPLE_PERIOD)
+		cursor++;
+
+	te = (void *)&event->sample.array[cursor];
+
+	if (sample_type & PERF_SAMPLE_RAW && te->size > 0) {
+		char *event_str;
+		struct power_entry *pe;
+
+		pe = (void *)te;
+
+		event_str = perf_header__find_event(te->type);
+
+		if (!event_str)
+			return 0;
+
+		if (strcmp(event_str, "power:power_start") == 0)
+			c_state_start(cpu, stamp, pe->value);
+
+		if (strcmp(event_str, "power:power_end") == 0)
+			c_state_end(cpu, stamp);
+
+		if (strcmp(event_str, "power:power_frequency") == 0)
+			p_state_change(cpu, stamp, pe->value);
+
+		if (strcmp(event_str, "sched:sched_wakeup") == 0)
+			sched_wakeup(cpu, stamp, pid, te);
+
+		if (strcmp(event_str, "sched:sched_switch") == 0)
+			sched_switch(cpu, stamp, te);
+	}
+	return 0;
+}
+
+/*
+ * After the last sample we need to wrap up the current C/P state
+ * and close out each CPU for these.
+ */
+static void end_sample_processing(void)
+{
+	u64 cpu;
+	struct power_event *pwr;
+
+	for (cpu = 0; cpu < numcpus; cpu++) {
+		pwr = malloc(sizeof(struct power_event));
+		if (!pwr)
+			return;
+		memset(pwr, 0, sizeof(struct power_event));
+
+		/* C state */
+#if 0
+		pwr->state = cpus_cstate_state[cpu];
+		pwr->start_time = cpus_cstate_start_times[cpu];
+		pwr->end_time = last_time;
+		pwr->cpu = cpu;
+		pwr->type = CSTATE;
+		pwr->next = power_events;
+
+		power_events = pwr;
+#endif
+		/* P state */
+
+		pwr = malloc(sizeof(struct power_event));
+		if (!pwr)
+			return;
+		memset(pwr, 0, sizeof(struct power_event));
+
+		pwr->state = cpus_pstate_state[cpu];
+		pwr->start_time = cpus_pstate_start_times[cpu];
+		pwr->end_time = last_time;
+		pwr->cpu = cpu;
+		pwr->type = PSTATE;
+		pwr->next = power_events;
+
+		if (!pwr->start_time)
+			pwr->start_time = first_time;
+		if (!pwr->state)
+			pwr->state = min_freq;
+		power_events = pwr;
+	}
+}
+
+static u64 sample_time(event_t *event)
+{
+	int cursor;
+
+	cursor = 0;
+	if (sample_type & PERF_SAMPLE_IP)
+		cursor++;
+	if (sample_type & PERF_SAMPLE_TID)
+		cursor++;
+	if (sample_type & PERF_SAMPLE_TIME)
+		return event->sample.array[cursor];
+	return 0;
+}
+
+
+/*
+ * We first queue all events, sorted backwards by insertion.
+ * The order will get flipped later.
+ */
+static int
+queue_sample_event(event_t *event)
+{
+	struct sample_wrapper *copy, *prev;
+	int size;
+
+	size = event->sample.header.size + sizeof(struct sample_wrapper) + 8;
+
+	copy = malloc(size);
+	if (!copy)
+		return 1;
+
+	memset(copy, 0, size);
+
+	copy->next = NULL;
+	copy->timestamp = sample_time(event);
+
+	memcpy(&copy->data, event, event->sample.header.size);
+
+	/* insert in the right place in the list */
+
+	if (!all_samples) {
+		/* first sample ever */
+		all_samples = copy;
+		return 0;
+	}
+
+	if (all_samples->timestamp < copy->timestamp) {
+		/* insert at the head of the list */
+		copy->next = all_samples;
+		all_samples = copy;
+		return 0;
+	}
+
+	prev = all_samples;
+	while (prev->next) {
+		if (prev->next->timestamp < copy->timestamp) {
+			copy->next = prev->next;
+			prev->next = copy;
+			return 0;
+		}
+		prev = prev->next;
+	}
+	/* insert at the end of the list */
+	prev->next = copy;
+
+	return 0;
+}
+
+static void sort_queued_samples(void)
+{
+	struct sample_wrapper *cursor, *next;
+
+	cursor = all_samples;
+	all_samples = NULL;
+
+	while (cursor) {
+		next = cursor->next;
+		cursor->next = all_samples;
+		all_samples = cursor;
+		cursor = next;
+	}
+}
+
+/*
+ * Sort the pid datastructure
+ */
+static void sort_pids(void)
+{
+	struct per_pid *new_list, *p, *cursor, *prev;
+	/* sort by ppid first, then by pid, lowest to highest */
+
+	new_list = NULL;
+
+	while (all_data) {
+		p = all_data;
+		all_data = p->next;
+		p->next = NULL;
+
+		if (new_list == NULL) {
+			new_list = p;
+			p->next = NULL;
+			continue;
+		}
+		prev = NULL;
+		cursor = new_list;
+		while (cursor) {
+			if (cursor->ppid > p->ppid ||
+				(cursor->ppid == p->ppid && cursor->pid > p->pid)) {
+				/* must insert before */
+				if (prev) {
+					p->next = prev->next;
+					prev->next = p;
+					cursor = NULL;
+					continue;
+				} else {
+					p->next = new_list;
+					new_list = p;
+					cursor = NULL;
+					continue;
+				}
+			}
+
+			prev = cursor;
+			cursor = cursor->next;
+			if (!cursor)
+				prev->next = p;
+		}
+	}
+	all_data = new_list;
+}
+
+
+static void draw_c_p_states(void)
+{
+	struct power_event *pwr;
+	pwr = power_events;
+
+	/*
+	 * two pass drawing so that the P state bars are on top of the C state blocks
+	 */
+	while (pwr) {
+		if (pwr->type == CSTATE)
+			svg_cstate(pwr->cpu, pwr->start_time, pwr->end_time, pwr->state);
+		pwr = pwr->next;
+	}
+
+	pwr = power_events;
+	while (pwr) {
+		if (pwr->type == PSTATE) {
+			if (!pwr->state)
+				pwr->state = min_freq;
+			svg_pstate(pwr->cpu, pwr->start_time, pwr->end_time, pwr->state);
+		}
+		pwr = pwr->next;
+	}
+}
+
+static void draw_wakeups(void)
+{
+	struct wake_event *we;
+	struct per_pid *p;
+	struct per_pidcomm *c;
+
+	we = wake_events;
+	while (we) {
+		int from = 0, to = 0;
+
+		/* locate the column of the waker and wakee */
+		p = all_data;
+		while (p) {
+			if (p->pid == we->waker || p->pid == we->wakee) {
+				c = p->all;
+				while (c) {
+					if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
+						if (p->pid == we->waker)
+							from = c->Y;
+						if (p->pid == we->wakee)
+							to = c->Y;
+					}
+					c = c->next;
+				}
+			}
+			p = p->next;
+		}
+
+		if (we->waker == -1)
+			svg_interrupt(we->time, to);
+		else if (from && to && abs(from - to) == 1)
+			svg_wakeline(we->time, from, to);
+		else
+			svg_partial_wakeline(we->time, from, to);
+		we = we->next;
+	}
+}
+
+static void draw_cpu_usage(void)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	struct cpu_sample *sample;
+	p = all_data;
+	while (p) {
+		c = p->all;
+		while (c) {
+			sample = c->samples;
+			while (sample) {
+				if (sample->type == TYPE_RUNNING)
+					svg_process(sample->cpu, sample->start_time, sample->end_time, "sample", c->comm);
+
+				sample = sample->next;
+			}
+			c = c->next;
+		}
+		p = p->next;
+	}
+}
+
+static void draw_process_bars(void)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	struct cpu_sample *sample;
+	int Y = 0;
+
+	Y = 2 * numcpus + 2;
+
+	p = all_data;
+	while (p) {
+		c = p->all;
+		while (c) {
+			if (!c->display) {
+				c->Y = 0;
+				c = c->next;
+				continue;
+			}
+
+			svg_box(Y, p->start_time, p->end_time, "process");
+			sample = c->samples;
+			while (sample) {
+				if (sample->type == TYPE_RUNNING)
+					svg_sample(Y, sample->cpu, sample->start_time, sample->end_time, "sample");
+				if (sample->type == TYPE_BLOCKED)
+					svg_box(Y, sample->start_time, sample->end_time, "blocked");
+				if (sample->type == TYPE_WAITING)
+					svg_box(Y, sample->start_time, sample->end_time, "waiting");
+				sample = sample->next;
+			}
+
+			if (c->comm) {
+				char comm[256];
+				if (c->total_time > 5000000000) /* 5 seconds */
+					sprintf(comm, "%s:%i (%2.2fs)", c->comm, p->pid, c->total_time / 1000000000.0);
+				else
+					sprintf(comm, "%s:%i (%3.1fms)", c->comm, p->pid, c->total_time / 1000000.0);
+
+				svg_text(Y, c->start_time, comm);
+			}
+			c->Y = Y;
+			Y++;
+			c = c->next;
+		}
+		p = p->next;
+	}
+}
+
+static int determine_display_tasks(u64 threshold)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	int count = 0;
+
+	p = all_data;
+	while (p) {
+		p->display = 0;
+		if (p->start_time == 1)
+			p->start_time = first_time;
+
+		/* no exit marker, task kept running to the end */
+		if (p->end_time == 0)
+			p->end_time = last_time;
+		if (p->total_time >= threshold)
+			p->display = 1;
+
+		c = p->all;
+
+		while (c) {
+			c->display = 0;
+
+			if (c->start_time == 1)
+				c->start_time = first_time;
+
+			if (c->total_time >= threshold) {
+				c->display = 1;
+				count++;
+			}
+
+			if (c->end_time == 0)
+				c->end_time = last_time;
+
+			c = c->next;
+		}
+		p = p->next;
+	}
+	return count;
+}
+
+
+
+#define TIME_THRESH 10000000
+
+static void write_svg_file(const char *filename)
+{
+	u64 i;
+	int count;
+
+	numcpus++;
+
+
+	count = determine_display_tasks(TIME_THRESH);
+
+	/* We'd like to show at least 15 tasks; be less picky if we have fewer */
+	if (count < 15)
+		count = determine_display_tasks(TIME_THRESH / 10);
+
+	open_svg(filename, numcpus, count);
+
+	svg_time_grid(first_time, last_time);
+	svg_legenda();
+
+	for (i = 0; i < numcpus; i++)
+		svg_cpu_box(i, max_freq, turbo_frequency);
+
+	draw_cpu_usage();
+	draw_process_bars();
+	draw_c_p_states();
+	draw_wakeups();
+
+	svg_close();
+}
+
+static int
+process_event(event_t *event)
+{
+
+	switch (event->header.type) {
+
+	case PERF_EVENT_COMM:
+		return process_comm_event(event);
+	case PERF_EVENT_FORK:
+		return process_fork_event(event);
+	case PERF_EVENT_EXIT:
+		return process_exit_event(event);
+	case PERF_EVENT_SAMPLE:
+		return queue_sample_event(event);
+
+	/*
+	 * We dont process them right now but they are fine:
+	 */
+	case PERF_EVENT_MMAP:
+	case PERF_EVENT_THROTTLE:
+	case PERF_EVENT_UNTHROTTLE:
+		return 0;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static void process_samples(void)
+{
+	struct sample_wrapper *cursor;
+	event_t *event;
+
+	sort_queued_samples();
+
+	cursor = all_samples;
+	while (cursor) {
+		event = (void *)&cursor->data;
+		cursor = cursor->next;
+		process_sample_event(event);
+	}
+}
+
+
+static int __cmd_timechart(void)
+{
+	int ret, rc = EXIT_FAILURE;
+	unsigned long offset = 0;
+	unsigned long head, shift;
+	struct stat statbuf;
+	event_t *event;
+	uint32_t size;
+	char *buf;
+	int input;
+
+	input = open(input_name, O_RDONLY);
+	if (input < 0) {
+		fprintf(stderr, " failed to open file: %s", input_name);
+		if (!strcmp(input_name, "perf.data"))
+			fprintf(stderr, "  (try 'perf record' first)");
+		fprintf(stderr, "\n");
+		exit(-1);
+	}
+
+	ret = fstat(input, &statbuf);
+	if (ret < 0) {
+		perror("failed to stat file");
+		exit(-1);
+	}
+
+	if (!statbuf.st_size) {
+		fprintf(stderr, "zero-sized file, nothing to do!\n");
+		exit(0);
+	}
+
+	header = perf_header__read(input);
+	head = header->data_offset;
+
+	sample_type = perf_header__sample_type(header);
+
+	shift = page_size * (head / page_size);
+	offset += shift;
+	head -= shift;
+
+remap:
+	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
+			   MAP_SHARED, input, offset);
+	if (buf == MAP_FAILED) {
+		perror("failed to mmap file");
+		exit(-1);
+	}
+
+more:
+	event = (event_t *)(buf + head);
+
+	size = event->header.size;
+	if (!size)
+		size = 8;
+
+	if (head + event->header.size >= page_size * mmap_window) {
+		int ret2;
+
+		shift = page_size * (head / page_size);
+
+		ret2 = munmap(buf, page_size * mmap_window);
+		assert(ret2 == 0);
+
+		offset += shift;
+		head -= shift;
+		goto remap;
+	}
+
+	size = event->header.size;
+
+	if (!size || process_event(event) < 0) {
+
+		printf("%p [%p]: skipping unknown header type: %d\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->header.type);
+
+		/*
+		 * assume we lost track of the stream, check alignment, and
+		 * increment a single u64 in the hope to catch on again 'soon'.
+		 */
+
+		if (unlikely(head & 7))
+			head &= ~7ULL;
+
+		size = 8;
+	}
+
+	head += size;
+
+	if (offset + head >= header->data_offset + header->data_size)
+		goto done;
+
+	if (offset + head < (unsigned long)statbuf.st_size)
+		goto more;
+
+done:
+	rc = EXIT_SUCCESS;
+	close(input);
+
+
+	process_samples();
+
+	end_sample_processing();
+
+	sort_pids();
+
+	write_svg_file(output_name);
+
+	printf("Written %2.1f seconds of trace to %s.\n", (last_time - first_time) / 1000000000.0, output_name);
+
+	return rc;
+}
+
+static const char * const timechart_usage[] = {
+	"perf timechart [<options>] {record}",
+	NULL
+};
+
+static const char *record_args[] = {
+	"record",
+	"-a",
+	"-R",
+	"-M",
+	"-f",
+	"-c", "1",
+	"-e", "power:power_start",
+	"-e", "power:power_end",
+	"-e", "power:power_frequency",
+	"-e", "sched:sched_wakeup",
+	"-e", "sched:sched_switch",
+};
+
+static int __cmd_record(int argc, const char **argv)
+{
+	unsigned int rec_argc, i, j;
+	const char **rec_argv;
+
+	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
+	rec_argv = calloc(rec_argc + 1, sizeof(char *));
+
+	for (i = 0; i < ARRAY_SIZE(record_args); i++)
+		rec_argv[i] = strdup(record_args[i]);
+
+	for (j = 1; j < (unsigned int)argc; j++, i++)
+		rec_argv[i] = argv[j];
+
+	return cmd_record(i, rec_argv, NULL);
+}
+
+static const struct option options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		    "input file name"),
+	OPT_STRING('o', "output", &output_name, "file",
+		    "output file name"),
+	OPT_END()
+};
+
+
+int cmd_timechart(int argc, const char **argv, const char *prefix __used)
+{
+	symbol__init();
+
+	page_size = getpagesize();
+
+	argc = parse_options(argc, argv, options, timechart_usage,
+			PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (argc && !strncmp(argv[0], "rec", 3))
+		return __cmd_record(argc, argv);
+	else if (argc)
+		usage_with_options(timechart_usage, options);
+
+	setup_pager();
+
+	return __cmd_timechart();
+}
diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h
index 3a63e41..e11d8d2 100644
--- a/tools/perf/builtin.h
+++ b/tools/perf/builtin.h
@@ -16,12 +16,14 @@
 
 extern int cmd_annotate(int argc, const char **argv, const char *prefix);
 extern int cmd_help(int argc, const char **argv, const char *prefix);
+extern int cmd_sched(int argc, const char **argv, const char *prefix);
+extern int cmd_list(int argc, const char **argv, const char *prefix);
 extern int cmd_record(int argc, const char **argv, const char *prefix);
 extern int cmd_report(int argc, const char **argv, const char *prefix);
 extern int cmd_stat(int argc, const char **argv, const char *prefix);
+extern int cmd_timechart(int argc, const char **argv, const char *prefix);
 extern int cmd_top(int argc, const char **argv, const char *prefix);
-extern int cmd_version(int argc, const char **argv, const char *prefix);
-extern int cmd_list(int argc, const char **argv, const char *prefix);
 extern int cmd_trace(int argc, const char **argv, const char *prefix);
+extern int cmd_version(int argc, const char **argv, const char *prefix);
 
 #endif
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
index eebce30..00326e2 100644
--- a/tools/perf/command-list.txt
+++ b/tools/perf/command-list.txt
@@ -4,7 +4,10 @@
 #
 perf-annotate			mainporcelain common
 perf-list			mainporcelain common
+perf-sched			mainporcelain common
 perf-record			mainporcelain common
 perf-report			mainporcelain common
 perf-stat			mainporcelain common
+perf-timechart			mainporcelain common
 perf-top			mainporcelain common
+perf-trace			mainporcelain common
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index fe4589d..19fc7fe 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -289,10 +289,12 @@
 		{ "record", cmd_record, 0 },
 		{ "report", cmd_report, 0 },
 		{ "stat", cmd_stat, 0 },
+		{ "timechart", cmd_timechart, 0 },
 		{ "top", cmd_top, 0 },
 		{ "annotate", cmd_annotate, 0 },
 		{ "version", cmd_version, 0 },
 		{ "trace", cmd_trace, 0 },
+		{ "sched", cmd_sched, 0 },
 	};
 	unsigned int i;
 	static const char ext[] = STRIP_EXTENSION;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index fa2d4e9..018d414 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -39,6 +39,7 @@
 	struct perf_event_header header;
 	u32 pid, ppid;
 	u32 tid, ptid;
+	u64 time;
 };
 
 struct lost_event {
@@ -52,13 +53,19 @@
  */
 struct read_event {
 	struct perf_event_header header;
-	u32 pid,tid;
+	u32 pid, tid;
 	u64 value;
 	u64 time_enabled;
 	u64 time_running;
 	u64 id;
 };
 
+struct sample_event{
+	struct perf_event_header        header;
+	u64 array[];
+};
+
+
 typedef union event_union {
 	struct perf_event_header	header;
 	struct ip_event			ip;
@@ -67,6 +74,7 @@
 	struct fork_event		fork;
 	struct lost_event		lost;
 	struct read_event		read;
+	struct sample_event		sample;
 } event_t;
 
 struct map {
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index ec4d4c2..bb4fca3 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -7,9 +7,8 @@
 #include "header.h"
 
 /*
- *
+ * Create new perf.data header attribute:
  */
-
 struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr)
 {
 	struct perf_header_attr *self = malloc(sizeof(*self));
@@ -43,9 +42,8 @@
 }
 
 /*
- *
+ * Create new perf.data header:
  */
-
 struct perf_header *perf_header__new(void)
 {
 	struct perf_header *self = malloc(sizeof(*self));
@@ -86,6 +84,46 @@
 	self->attr[pos] = attr;
 }
 
+#define MAX_EVENT_NAME 64
+
+struct perf_trace_event_type {
+	u64	event_id;
+	char	name[MAX_EVENT_NAME];
+};
+
+static int event_count;
+static struct perf_trace_event_type *events;
+
+void perf_header__push_event(u64 id, const char *name)
+{
+	if (strlen(name) > MAX_EVENT_NAME)
+		printf("Event %s will be truncated\n", name);
+
+	if (!events) {
+		events = malloc(sizeof(struct perf_trace_event_type));
+		if (!events)
+			die("nomem");
+	} else {
+		events = realloc(events, (event_count + 1) * sizeof(struct perf_trace_event_type));
+		if (!events)
+			die("nomem");
+	}
+	memset(&events[event_count], 0, sizeof(struct perf_trace_event_type));
+	events[event_count].event_id = id;
+	strncpy(events[event_count].name, name, MAX_EVENT_NAME - 1);
+	event_count++;
+}
+
+char *perf_header__find_event(u64 id)
+{
+	int i;
+	for (i = 0 ; i < event_count; i++) {
+		if (events[i].event_id == id)
+			return events[i].name;
+	}
+	return NULL;
+}
+
 static const char *__perf_magic = "PERFFILE";
 
 #define PERF_MAGIC	(*(u64 *)__perf_magic)
@@ -106,6 +144,7 @@
 	u64				attr_size;
 	struct perf_file_section	attrs;
 	struct perf_file_section	data;
+	struct perf_file_section	event_types;
 };
 
 static void do_write(int fd, void *buf, size_t size)
@@ -154,6 +193,11 @@
 		do_write(fd, &f_attr, sizeof(f_attr));
 	}
 
+	self->event_offset = lseek(fd, 0, SEEK_CUR);
+	self->event_size = event_count * sizeof(struct perf_trace_event_type);
+	if (events)
+		do_write(fd, events, self->event_size);
+
 
 	self->data_offset = lseek(fd, 0, SEEK_CUR);
 
@@ -169,6 +213,10 @@
 			.offset = self->data_offset,
 			.size	= self->data_size,
 		},
+		.event_types = {
+			.offset = self->event_offset,
+			.size	= self->event_size,
+		},
 	};
 
 	lseek(fd, 0, SEEK_SET);
@@ -234,6 +282,17 @@
 		lseek(fd, tmp, SEEK_SET);
 	}
 
+	if (f_header.event_types.size) {
+		lseek(fd, f_header.event_types.offset, SEEK_SET);
+		events = malloc(f_header.event_types.size);
+		if (!events)
+			die("nomem");
+		do_read(fd, events, f_header.event_types.size);
+		event_count =  f_header.event_types.size / sizeof(struct perf_trace_event_type);
+	}
+	self->event_offset = f_header.event_types.offset;
+	self->event_size   = f_header.event_types.size;
+
 	self->data_offset = f_header.data.offset;
 	self->data_size   = f_header.data.size;
 
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index 5d0a72e..7b0e84a 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -19,6 +19,8 @@
 	s64 attr_offset;
 	u64 data_offset;
 	u64 data_size;
+	u64 event_offset;
+	u64 event_size;
 };
 
 struct perf_header *perf_header__read(int fd);
@@ -27,6 +29,10 @@
 void perf_header__add_attr(struct perf_header *self,
 			   struct perf_header_attr *attr);
 
+void perf_header__push_event(u64 id, const char *name);
+char *perf_header__find_event(u64 id);
+
+
 struct perf_header_attr *
 perf_header_attr__new(struct perf_counter_attr *attr);
 void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index a587d41..89172fd 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -6,6 +6,7 @@
 #include "exec_cmd.h"
 #include "string.h"
 #include "cache.h"
+#include "header.h"
 
 int					nr_counters;
 
@@ -18,6 +19,12 @@
 	const char	*alias;
 };
 
+enum event_result {
+	EVT_FAILED,
+	EVT_HANDLED,
+	EVT_HANDLED_ALL
+};
+
 char debugfs_path[MAXPATHLEN];
 
 #define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
@@ -139,7 +146,7 @@
 	   (strcmp(evt_dirent.d_name, "..")) &&				       \
 	   (!tp_event_has_id(&sys_dirent, &evt_dirent)))
 
-#define MAX_EVENT_LENGTH 30
+#define MAX_EVENT_LENGTH 512
 
 int valid_debugfs_mount(const char *debugfs)
 {
@@ -344,7 +351,7 @@
 	return -1;
 }
 
-static int
+static enum event_result
 parse_generic_hw_event(const char **str, struct perf_counter_attr *attr)
 {
 	const char *s = *str;
@@ -356,7 +363,7 @@
 	 * then bail out:
 	 */
 	if (cache_type == -1)
-		return 0;
+		return EVT_FAILED;
 
 	while ((cache_op == -1 || cache_result == -1) && *s == '-') {
 		++s;
@@ -402,27 +409,115 @@
 	attr->type = PERF_TYPE_HW_CACHE;
 
 	*str = s;
-	return 1;
+	return EVT_HANDLED;
 }
 
-static int parse_tracepoint_event(const char **strp,
+static enum event_result
+parse_single_tracepoint_event(char *sys_name,
+			      const char *evt_name,
+			      unsigned int evt_length,
+			      char *flags,
+			      struct perf_counter_attr *attr,
+			      const char **strp)
+{
+	char evt_path[MAXPATHLEN];
+	char id_buf[4];
+	u64 id;
+	int fd;
+
+	if (flags) {
+		if (!strncmp(flags, "record", strlen(flags))) {
+			attr->sample_type |= PERF_SAMPLE_RAW;
+			attr->sample_type |= PERF_SAMPLE_TIME;
+			attr->sample_type |= PERF_SAMPLE_CPU;
+		}
+	}
+
+	snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+		 sys_name, evt_name);
+
+	fd = open(evt_path, O_RDONLY);
+	if (fd < 0)
+		return EVT_FAILED;
+
+	if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+		close(fd);
+		return EVT_FAILED;
+	}
+
+	close(fd);
+	id = atoll(id_buf);
+	attr->config = id;
+	attr->type = PERF_TYPE_TRACEPOINT;
+	*strp = evt_name + evt_length;
+
+	return EVT_HANDLED;
+}
+
+/* sys + ':' + event + ':' + flags*/
+#define MAX_EVOPT_LEN	(MAX_EVENT_LENGTH * 2 + 2 + 128)
+static enum event_result
+parse_subsystem_tracepoint_event(char *sys_name, char *flags)
+{
+	char evt_path[MAXPATHLEN];
+	struct dirent *evt_ent;
+	DIR *evt_dir;
+
+	snprintf(evt_path, MAXPATHLEN, "%s/%s", debugfs_path, sys_name);
+	evt_dir = opendir(evt_path);
+
+	if (!evt_dir) {
+		perror("Can't open event dir");
+		return EVT_FAILED;
+	}
+
+	while ((evt_ent = readdir(evt_dir))) {
+		char event_opt[MAX_EVOPT_LEN + 1];
+		int len;
+		unsigned int rem = MAX_EVOPT_LEN;
+
+		if (!strcmp(evt_ent->d_name, ".")
+		    || !strcmp(evt_ent->d_name, "..")
+		    || !strcmp(evt_ent->d_name, "enable")
+		    || !strcmp(evt_ent->d_name, "filter"))
+			continue;
+
+		len = snprintf(event_opt, MAX_EVOPT_LEN, "%s:%s", sys_name,
+			       evt_ent->d_name);
+		if (len < 0)
+			return EVT_FAILED;
+
+		rem -= len;
+		if (flags) {
+			if (rem < strlen(flags) + 1)
+				return EVT_FAILED;
+
+			strcat(event_opt, ":");
+			strcat(event_opt, flags);
+		}
+
+		if (parse_events(NULL, event_opt, 0))
+			return EVT_FAILED;
+	}
+
+	return EVT_HANDLED_ALL;
+}
+
+
+static enum event_result parse_tracepoint_event(const char **strp,
 				    struct perf_counter_attr *attr)
 {
 	const char *evt_name;
 	char *flags;
 	char sys_name[MAX_EVENT_LENGTH];
-	char id_buf[4];
-	int fd;
 	unsigned int sys_length, evt_length;
-	u64 id;
-	char evt_path[MAXPATHLEN];
 
 	if (valid_debugfs_mount(debugfs_path))
 		return 0;
 
 	evt_name = strchr(*strp, ':');
 	if (!evt_name)
-		return 0;
+		return EVT_FAILED;
 
 	sys_length = evt_name - *strp;
 	if (sys_length >= MAX_EVENT_LENGTH)
@@ -434,32 +529,22 @@
 
 	flags = strchr(evt_name, ':');
 	if (flags) {
-		*flags = '\0';
+		/* split it out: */
+		evt_name = strndup(evt_name, flags - evt_name);
 		flags++;
-		if (!strncmp(flags, "record", strlen(flags)))
-			attr->sample_type |= PERF_SAMPLE_RAW;
 	}
 
 	evt_length = strlen(evt_name);
 	if (evt_length >= MAX_EVENT_LENGTH)
-		return 0;
+		return EVT_FAILED;
 
-	snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
-		 sys_name, evt_name);
-	fd = open(evt_path, O_RDONLY);
-	if (fd < 0)
-		return 0;
-
-	if (read(fd, id_buf, sizeof(id_buf)) < 0) {
-		close(fd);
-		return 0;
-	}
-	close(fd);
-	id = atoll(id_buf);
-	attr->config = id;
-	attr->type = PERF_TYPE_TRACEPOINT;
-	*strp = evt_name + evt_length;
-	return 1;
+	if (!strcmp(evt_name, "*")) {
+		*strp = evt_name + evt_length;
+		return parse_subsystem_tracepoint_event(sys_name, flags);
+	} else
+		return parse_single_tracepoint_event(sys_name, evt_name,
+						     evt_length, flags,
+						     attr, strp);
 }
 
 static int check_events(const char *str, unsigned int i)
@@ -477,7 +562,7 @@
 	return 0;
 }
 
-static int
+static enum event_result
 parse_symbolic_event(const char **strp, struct perf_counter_attr *attr)
 {
 	const char *str = *strp;
@@ -490,31 +575,32 @@
 			attr->type = event_symbols[i].type;
 			attr->config = event_symbols[i].config;
 			*strp = str + n;
-			return 1;
+			return EVT_HANDLED;
 		}
 	}
-	return 0;
+	return EVT_FAILED;
 }
 
-static int parse_raw_event(const char **strp, struct perf_counter_attr *attr)
+static enum event_result
+parse_raw_event(const char **strp, struct perf_counter_attr *attr)
 {
 	const char *str = *strp;
 	u64 config;
 	int n;
 
 	if (*str != 'r')
-		return 0;
+		return EVT_FAILED;
 	n = hex2u64(str + 1, &config);
 	if (n > 0) {
 		*strp = str + n + 1;
 		attr->type = PERF_TYPE_RAW;
 		attr->config = config;
-		return 1;
+		return EVT_HANDLED;
 	}
-	return 0;
+	return EVT_FAILED;
 }
 
-static int
+static enum event_result
 parse_numeric_event(const char **strp, struct perf_counter_attr *attr)
 {
 	const char *str = *strp;
@@ -530,13 +616,13 @@
 			attr->type = type;
 			attr->config = config;
 			*strp = endp;
-			return 1;
+			return EVT_HANDLED;
 		}
 	}
-	return 0;
+	return EVT_FAILED;
 }
 
-static int
+static enum event_result
 parse_event_modifier(const char **strp, struct perf_counter_attr *attr)
 {
 	const char *str = *strp;
@@ -569,37 +655,84 @@
  * Each event can have multiple symbolic names.
  * Symbolic names are (almost) exactly matched.
  */
-static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
+static enum event_result
+parse_event_symbols(const char **str, struct perf_counter_attr *attr)
 {
-	if (!(parse_tracepoint_event(str, attr) ||
-	      parse_raw_event(str, attr) ||
-	      parse_numeric_event(str, attr) ||
-	      parse_symbolic_event(str, attr) ||
-	      parse_generic_hw_event(str, attr)))
-		return 0;
+	enum event_result ret;
 
+	ret = parse_tracepoint_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	ret = parse_raw_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	ret = parse_numeric_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	ret = parse_symbolic_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	ret = parse_generic_hw_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	return EVT_FAILED;
+
+modifier:
 	parse_event_modifier(str, attr);
 
-	return 1;
+	return ret;
 }
 
+static void store_event_type(const char *orgname)
+{
+	char filename[PATH_MAX], *c;
+	FILE *file;
+	int id;
+
+	sprintf(filename, "/sys/kernel/debug/tracing/events/%s/id", orgname);
+	c = strchr(filename, ':');
+	if (c)
+		*c = '/';
+
+	file = fopen(filename, "r");
+	if (!file)
+		return;
+	if (fscanf(file, "%i", &id) < 1)
+		die("cannot store event ID");
+	fclose(file);
+	perf_header__push_event(id, orgname);
+}
+
+
 int parse_events(const struct option *opt __used, const char *str, int unset __used)
 {
 	struct perf_counter_attr attr;
+	enum event_result ret;
+
+	if (strchr(str, ':'))
+		store_event_type(str);
 
 	for (;;) {
 		if (nr_counters == MAX_COUNTERS)
 			return -1;
 
 		memset(&attr, 0, sizeof(attr));
-		if (!parse_event_symbols(&str, &attr))
+		ret = parse_event_symbols(&str, &attr);
+		if (ret == EVT_FAILED)
 			return -1;
 
 		if (!(*str == 0 || *str == ',' || isspace(*str)))
 			return -1;
 
-		attrs[nr_counters] = attr;
-		nr_counters++;
+		if (ret != EVT_HANDLED_ALL) {
+			attrs[nr_counters] = attr;
+			nr_counters++;
+		}
 
 		if (*str == 0)
 			break;
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index 8aa3464..2ee248f 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -104,6 +104,8 @@
 	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), .argh = "time", .help = (h), .callback = parse_opt_approxidate_cb }
 #define OPT_CALLBACK(s, l, v, a, h, f) \
 	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f) }
+#define OPT_CALLBACK_NOOPT(s, l, v, a, h, f) \
+	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .flags = PARSE_OPT_NOARG }
 #define OPT_CALLBACK_DEFAULT(s, l, v, a, h, f, d) \
 	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d, .flags = PARSE_OPT_LASTARG_DEFAULT }
 
diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
new file mode 100644
index 0000000..b0fcecd
--- /dev/null
+++ b/tools/perf/util/svghelper.c
@@ -0,0 +1,384 @@
+/*
+ * svghelper.c - helper functions for outputting svg
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * Authors:
+ *     Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "svghelper.h"
+
+static u64 first_time, last_time;
+static u64 turbo_frequency, max_freq;
+
+
+#define SLOT_MULT 30.0
+#define SLOT_HEIGHT 25.0
+#define WIDTH 1000.0
+
+#define MIN_TEXT_SIZE 0.001
+
+static u64 total_height;
+static FILE *svgfile;
+
+static double cpu2slot(int cpu)
+{
+	return 2 * cpu + 1;
+}
+
+static double cpu2y(int cpu)
+{
+	return cpu2slot(cpu) * SLOT_MULT;
+}
+
+static double time2pixels(u64 time)
+{
+	double X;
+
+	X = WIDTH * (time - first_time) / (last_time - first_time);
+	return X;
+}
+
+void open_svg(const char *filename, int cpus, int rows)
+{
+
+	svgfile = fopen(filename, "w");
+	if (!svgfile) {
+		fprintf(stderr, "Cannot open %s for output\n", filename);
+		return;
+	}
+	total_height = (1 + rows + cpu2slot(cpus)) * SLOT_MULT;
+	fprintf(svgfile, "<?xml version=\"1.0\" standalone=\"no\"?> \n");
+	fprintf(svgfile, "<svg width=\"%4.1f\" height=\"%llu\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n", WIDTH, total_height);
+
+	fprintf(svgfile, "<defs>\n  <style type=\"text/css\">\n    <![CDATA[\n");
+
+	fprintf(svgfile, "      rect          { stroke-width: 1; }\n");
+	fprintf(svgfile, "      rect.process  { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:1;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.sample   { fill:rgb(  0,  0,255); fill-opacity:0.8; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.blocked  { fill:rgb(255,  0,  0); fill-opacity:0.5; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.waiting  { fill:rgb(255,255,  0); fill-opacity:0.3; stroke-width:0;   stroke:rgb(  0,  0,  0); } \n");
+	fprintf(svgfile, "      rect.cpu      { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n");
+	fprintf(svgfile, "      rect.pstate   { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c1       { fill:rgb(255,214,214); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c2       { fill:rgb(255,172,172); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c3       { fill:rgb(255,130,130); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c4       { fill:rgb(255, 88, 88); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c5       { fill:rgb(255, 44, 44); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      rect.c6       { fill:rgb(255,  0,  0); fill-opacity:0.5; stroke-width:0; } \n");
+	fprintf(svgfile, "      line.pstate   { stroke:rgb(255,255,  0); stroke-opacity:0.8; stroke-width:2; } \n");
+
+	fprintf(svgfile, "    ]]>\n   </style>\n</defs>\n");
+}
+
+void svg_box(int Yslot, u64 start, u64 end, const char *type)
+{
+	if (!svgfile)
+		return;
+
+	fprintf(svgfile, "<rect x=\"%4.8f\" width=\"%4.8f\" y=\"%4.1f\" height=\"%4.1f\" class=\"%s\"/>\n",
+		time2pixels(start), time2pixels(end)-time2pixels(start), Yslot * SLOT_MULT, SLOT_HEIGHT, type);
+}
+
+void svg_sample(int Yslot, int cpu, u64 start, u64 end, const char *type)
+{
+	double text_size;
+	if (!svgfile)
+		return;
+
+	fprintf(svgfile, "<rect x=\"%4.8f\" width=\"%4.8f\" y=\"%4.1f\" height=\"%4.1f\" class=\"%s\"/>\n",
+		time2pixels(start), time2pixels(end)-time2pixels(start), Yslot * SLOT_MULT, SLOT_HEIGHT, type);
+
+	text_size = (time2pixels(end)-time2pixels(start));
+	if (cpu > 9)
+		text_size = text_size/2;
+	if (text_size > 1.25)
+		text_size = 1.25;
+	if (text_size > MIN_TEXT_SIZE)
+		fprintf(svgfile, "<text transform=\"translate(%1.8f,%1.8f)\" font-size=\"%1.6fpt\">%i</text>\n",
+			time2pixels(start), Yslot *  SLOT_MULT + SLOT_HEIGHT - 1, text_size,  cpu + 1);
+
+}
+
+static char *cpu_model(void)
+{
+	static char cpu_m[255];
+	char buf[256];
+	FILE *file;
+
+	cpu_m[0] = 0;
+	/* CPU type */
+	file = fopen("/proc/cpuinfo", "r");
+	if (file) {
+		while (fgets(buf, 255, file)) {
+			if (strstr(buf, "model name")) {
+				strncpy(cpu_m, &buf[13], 255);
+				break;
+			}
+		}
+		fclose(file);
+	}
+	return cpu_m;
+}
+
+void svg_cpu_box(int cpu, u64 __max_freq, u64 __turbo_freq)
+{
+	char cpu_string[80];
+	if (!svgfile)
+		return;
+
+	max_freq = __max_freq;
+	turbo_frequency = __turbo_freq;
+
+	fprintf(svgfile, "<rect x=\"%4.8f\" width=\"%4.8f\" y=\"%4.1f\" height=\"%4.1f\" class=\"cpu\"/>\n",
+		time2pixels(first_time),
+		time2pixels(last_time)-time2pixels(first_time),
+		cpu2y(cpu), SLOT_MULT+SLOT_HEIGHT);
+
+	sprintf(cpu_string, "CPU %i", (int)cpu+1);
+	fprintf(svgfile, "<text transform=\"translate(%4.8f,%4.8f)\">%s</text>\n",
+		10+time2pixels(first_time), cpu2y(cpu) + SLOT_HEIGHT/2, cpu_string);
+
+	fprintf(svgfile, "<text transform=\"translate(%4.8f,%4.8f)\" font-size=\"1.25pt\">%s</text>\n",
+		10+time2pixels(first_time), cpu2y(cpu) + SLOT_MULT + SLOT_HEIGHT - 4, cpu_model());
+}
+
+void svg_process(int cpu, u64 start, u64 end, const char *type, const char *name)
+{
+	double width;
+
+	if (!svgfile)
+		return;
+
+	fprintf(svgfile, "<rect x=\"%4.8f\" width=\"%4.8f\" y=\"%4.1f\" height=\"%4.1f\" class=\"%s\"/>\n",
+		time2pixels(start), time2pixels(end)-time2pixels(start), cpu2y(cpu), SLOT_MULT+SLOT_HEIGHT, type);
+	width = time2pixels(end)-time2pixels(start);
+	if (width > 6)
+		width = 6;
+
+	if (width > MIN_TEXT_SIZE)
+		fprintf(svgfile, "<text  transform=\"translate(%4.8f,%4.8f) rotate(90)\" font-size=\"%3.4fpt\">%s</text>\n",
+			time2pixels(start), cpu2y(cpu), width, name);
+}
+
+void svg_cstate(int cpu, u64 start, u64 end, int type)
+{
+	double width;
+	char style[128];
+
+	if (!svgfile)
+		return;
+
+
+	if (type > 6)
+		type = 6;
+	sprintf(style, "c%i", type);
+
+	fprintf(svgfile, "<rect class=\"%s\" x=\"%4.8f\" width=\"%4.8f\" y=\"%4.1f\" height=\"%4.1f\"/>\n",
+		style,
+		time2pixels(start), time2pixels(end)-time2pixels(start),
+		cpu2y(cpu), SLOT_MULT+SLOT_HEIGHT);
+
+	width = time2pixels(end)-time2pixels(start);
+	if (width > 6)
+		width = 6;
+
+	if (width > MIN_TEXT_SIZE)
+		fprintf(svgfile, "<text  transform=\"translate(%4.8f,%4.8f) rotate(90)\" font-size=\"%3.4fpt\">C%i</text>\n",
+			time2pixels(start), cpu2y(cpu), width, type);
+}
+
+static char *HzToHuman(unsigned long hz)
+{
+	static char buffer[1024];
+	unsigned long long Hz;
+
+	memset(buffer, 0, 1024);
+
+	Hz = hz;
+
+	/* default: just put the Number in */
+	sprintf(buffer, "%9lli", Hz);
+
+	if (Hz > 1000)
+		sprintf(buffer, " %6lli Mhz", (Hz+500)/1000);
+
+	if (Hz > 1500000)
+		sprintf(buffer, " %6.2f Ghz", (Hz+5000.0)/1000000);
+
+	if (Hz == turbo_frequency)
+		sprintf(buffer, "Turbo");
+
+	return buffer;
+}
+
+void svg_pstate(int cpu, u64 start, u64 end, u64 freq)
+{
+	double height = 0;
+
+	if (!svgfile)
+		return;
+
+	if (max_freq)
+		height = freq * 1.0 / max_freq * (SLOT_HEIGHT + SLOT_MULT);
+	height = 1 + cpu2y(cpu) + SLOT_MULT + SLOT_HEIGHT - height;
+	fprintf(svgfile, "<line x1=\"%4.8f\" x2=\"%4.8f\" y1=\"%4.1f\" y2=\"%4.1f\" class=\"pstate\"/>\n",
+		time2pixels(start), time2pixels(end), height, height);
+	fprintf(svgfile, "<text transform=\"translate(%4.8f,%4.8f)\" font-size=\"0.25pt\">%s</text>\n",
+		time2pixels(start), height+0.9, HzToHuman(freq));
+
+}
+
+
+void svg_partial_wakeline(u64 start, int row1, int row2)
+{
+	double height;
+
+	if (!svgfile)
+		return;
+
+
+	if (row1 < row2) {
+		if (row1)
+			fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+				time2pixels(start), row1 * SLOT_MULT + SLOT_HEIGHT,  time2pixels(start), row1 * SLOT_MULT + SLOT_HEIGHT + SLOT_MULT/32);
+
+		if (row2)
+			fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+				time2pixels(start), row2 * SLOT_MULT - SLOT_MULT/32,  time2pixels(start), row2 * SLOT_MULT);
+	} else {
+		if (row2)
+			fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+				time2pixels(start), row2 * SLOT_MULT + SLOT_HEIGHT,  time2pixels(start), row2 * SLOT_MULT + SLOT_HEIGHT + SLOT_MULT/32);
+
+		if (row1)
+			fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+				time2pixels(start), row1 * SLOT_MULT - SLOT_MULT/32,  time2pixels(start), row1 * SLOT_MULT);
+	}
+	height = row1 * SLOT_MULT;
+	if (row2 > row1)
+		height += SLOT_HEIGHT;
+	if (row1)
+		fprintf(svgfile, "<circle  cx=\"%4.8f\" cy=\"%4.2f\" r = \"0.01\"  style=\"fill:rgb(32,255,32)\"/>\n",
+			time2pixels(start), height);
+}
+
+void svg_wakeline(u64 start, int row1, int row2)
+{
+	double height;
+
+	if (!svgfile)
+		return;
+
+
+	if (row1 < row2)
+		fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+			time2pixels(start), row1 * SLOT_MULT + SLOT_HEIGHT,  time2pixels(start), row2 * SLOT_MULT);
+	else
+		fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%4.2f\" style=\"stroke:rgb(32,255,32);stroke-width:0.009\"/>\n",
+			time2pixels(start), row2 * SLOT_MULT + SLOT_HEIGHT,  time2pixels(start), row1 * SLOT_MULT);
+
+	height = row1 * SLOT_MULT;
+	if (row2 > row1)
+		height += SLOT_HEIGHT;
+	fprintf(svgfile, "<circle  cx=\"%4.8f\" cy=\"%4.2f\" r = \"0.01\"  style=\"fill:rgb(32,255,32)\"/>\n",
+			time2pixels(start), height);
+}
+
+void svg_interrupt(u64 start, int row)
+{
+	if (!svgfile)
+		return;
+
+	fprintf(svgfile, "<circle  cx=\"%4.8f\" cy=\"%4.2f\" r = \"0.01\"  style=\"fill:rgb(255,128,128)\"/>\n",
+			time2pixels(start), row * SLOT_MULT);
+	fprintf(svgfile, "<circle  cx=\"%4.8f\" cy=\"%4.2f\" r = \"0.01\"  style=\"fill:rgb(255,128,128)\"/>\n",
+			time2pixels(start), row * SLOT_MULT + SLOT_HEIGHT);
+}
+
+void svg_text(int Yslot, u64 start, const char *text)
+{
+	if (!svgfile)
+		return;
+
+	fprintf(svgfile, "<text transform=\"translate(%4.8f,%4.8f)\">%s</text>\n",
+		time2pixels(start), Yslot * SLOT_MULT+SLOT_HEIGHT/2, text);
+}
+
+static void svg_legenda_box(int X, const char *text, const char *style)
+{
+	double boxsize;
+	boxsize = SLOT_HEIGHT / 2;
+
+	fprintf(svgfile, "<rect x=\"%i\" width=\"%4.8f\" y=\"0\" height=\"%4.1f\" class=\"%s\"/>\n",
+		X, boxsize, boxsize, style);
+	fprintf(svgfile, "<text transform=\"translate(%4.8f, %4.8f)\" font-size=\"%4.4fpt\">%s</text>\n",
+		X + boxsize + 5, boxsize, 0.8 * boxsize, text);
+}
+
+void svg_legenda(void)
+{
+	if (!svgfile)
+		return;
+
+	svg_legenda_box(0,	"Running", "sample");
+	svg_legenda_box(100,	"Idle","rect.c1");
+	svg_legenda_box(200,	"Deeper Idle", "rect.c3");
+	svg_legenda_box(350,	"Deepest Idle", "rect.c6");
+	svg_legenda_box(550,	"Sleeping", "process2");
+	svg_legenda_box(650,	"Waiting for cpu", "waiting");
+	svg_legenda_box(800,	"Blocked on IO", "blocked");
+}
+
+void svg_time_grid(u64 start, u64 end)
+{
+	u64 i;
+
+	first_time = start;
+	last_time = end;
+
+	first_time = first_time / 100000000 * 100000000;
+
+	if (!svgfile)
+		return;
+
+	i = first_time;
+	while (i < last_time) {
+		int color = 220;
+		double thickness = 0.075;
+		if ((i % 100000000) == 0) {
+			thickness = 0.5;
+			color = 192;
+		}
+		if ((i % 1000000000) == 0) {
+			thickness = 2.0;
+			color = 128;
+		}
+
+		fprintf(svgfile, "<line x1=\"%4.8f\" y1=\"%4.2f\" x2=\"%4.8f\" y2=\"%llu\" style=\"stroke:rgb(%i,%i,%i);stroke-width:%1.3f\"/>\n",
+			time2pixels(i), SLOT_MULT/2, time2pixels(i), total_height, color, color, color, thickness);
+
+		i += 10000000;
+	}
+}
+
+void svg_close(void)
+{
+	if (svgfile) {
+		fprintf(svgfile, "</svg>\n");
+		fclose(svgfile);
+		svgfile = NULL;
+	}
+}
diff --git a/tools/perf/util/svghelper.h b/tools/perf/util/svghelper.h
new file mode 100644
index 0000000..ad79b5d
--- /dev/null
+++ b/tools/perf/util/svghelper.h
@@ -0,0 +1,25 @@
+#ifndef _INCLUDE_GUARD_SVG_HELPER_
+#define _INCLUDE_GUARD_SVG_HELPER_
+
+#include "types.h"
+
+extern void open_svg(const char *filename, int cpus, int rows);
+extern void svg_box(int Yslot, u64 start, u64 end, const char *type);
+extern void svg_sample(int Yslot, int cpu, u64 start, u64 end, const char *type);
+extern void svg_cpu_box(int cpu, u64 max_frequency, u64 turbo_frequency);
+
+
+extern void svg_process(int cpu, u64 start, u64 end, const char *type, const char *name);
+extern void svg_cstate(int cpu, u64 start, u64 end, int type);
+extern void svg_pstate(int cpu, u64 start, u64 end, u64 freq);
+
+
+extern void svg_time_grid(u64 start, u64 end);
+extern void svg_legenda(void);
+extern void svg_wakeline(u64 start, int row1, int row2);
+extern void svg_partial_wakeline(u64 start, int row1, int row2);
+extern void svg_interrupt(u64 start, int row);
+extern void svg_text(int Yslot, u64 start, const char *text);
+extern void svg_close(void);
+
+#endif
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 7635928..45efb5d 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -8,7 +8,7 @@
 
 static struct thread *thread__new(pid_t pid)
 {
-	struct thread *self = malloc(sizeof(*self));
+	struct thread *self = calloc(1, sizeof(*self));
 
 	if (self != NULL) {
 		self->pid = pid;
@@ -85,7 +85,7 @@
 {
 	struct thread *thread = threads__findnew(0, threads, last_match);
 
-	if (!thread || thread__set_comm(thread, "[init]")) {
+	if (!thread || thread__set_comm(thread, "swapper")) {
 		fprintf(stderr, "problem inserting idle task.\n");
 		exit(-1);
 	}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 634f280..32aea3c 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -4,10 +4,11 @@
 #include "symbol.h"
 
 struct thread {
-	struct rb_node	 rb_node;
-	struct list_head maps;
-	pid_t		 pid;
-	char		 *comm;
+	struct rb_node		rb_node;
+	struct list_head	maps;
+	pid_t			pid;
+	char			shortname[3];
+	char			*comm;
 };
 
 int thread__set_comm(struct thread *self, const char *comm);
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index 6c9302a..1fd824c 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -458,7 +458,7 @@
 static void read_ftrace_printk(void)
 {
 	unsigned int size, check_size;
-	const char *path;
+	char *path;
 	struct stat st;
 	int ret;
 
@@ -468,14 +468,15 @@
 		/* not found */
 		size = 0;
 		write_or_die(&size, 4);
-		return;
+		goto out;
 	}
 	size = get_size(path);
 	write_or_die(&size, 4);
 	check_size = copy_file(path);
 	if (size != check_size)
 		die("error in size of file '%s'", path);
-
+out:
+	put_tracing_file(path);
 }
 
 static struct tracepoint_path *
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 629e602..f6a8437 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -1776,6 +1776,29 @@
 	}
 }
 
+unsigned long long
+raw_field_value(struct event *event, const char *name, void *data)
+{
+	struct format_field *field;
+
+	field = find_any_field(event, name);
+	if (!field)
+		return 0ULL;
+
+	return read_size(data + field->offset, field->size);
+}
+
+void *raw_field_ptr(struct event *event, const char *name, void *data)
+{
+	struct format_field *field;
+
+	field = find_any_field(event, name);
+	if (!field)
+		return NULL;
+
+	return data + field->offset;
+}
+
 static int get_common_info(const char *type, int *offset, int *size)
 {
 	struct event *event;
@@ -1799,7 +1822,7 @@
 	return 0;
 }
 
-static int parse_common_type(void *data)
+int trace_parse_common_type(void *data)
 {
 	static int type_offset;
 	static int type_size;
@@ -1832,7 +1855,7 @@
 	return read_size(data + pid_offset, pid_size);
 }
 
-static struct event *find_event(int id)
+struct event *trace_find_event(int id)
 {
 	struct event *event;
 
@@ -2420,8 +2443,8 @@
 	int type;
 	int pid;
 
-	type = parse_common_type(next->data);
-	event = find_event(type);
+	type = trace_parse_common_type(next->data);
+	event = trace_find_event(type);
 	if (!event)
 		return NULL;
 
@@ -2502,8 +2525,8 @@
 	int type;
 	int i;
 
-	type = parse_common_type(ret_rec->data);
-	ret_event = find_event(type);
+	type = trace_parse_common_type(ret_rec->data);
+	ret_event = trace_find_event(type);
 
 	field = find_field(ret_event, "rettime");
 	if (!field)
@@ -2696,11 +2719,13 @@
 	nsecs -= secs * NSECS_PER_SEC;
 	usecs = nsecs / NSECS_PER_USEC;
 
-	type = parse_common_type(data);
+	type = trace_parse_common_type(data);
 
-	event = find_event(type);
-	if (!event)
-		die("ug! no event found for type %d", type);
+	event = trace_find_event(type);
+	if (!event) {
+		printf("ug! no event found for type %d\n", type);
+		return;
+	}
 
 	pid = parse_common_pid(data);
 
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
index a1217a1..1b5c847 100644
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -458,12 +458,13 @@
 	return data;
 }
 
-void trace_report (void)
+void trace_report(void)
 {
 	const char *input_file = "trace.info";
 	char buf[BUFSIZ];
 	char test[] = { 23, 8, 68 };
 	char *version;
+	int show_version = 0;
 	int show_funcs = 0;
 	int show_printk = 0;
 
@@ -480,7 +481,8 @@
 		die("not a trace file (missing tracing)");
 
 	version = read_string();
-	printf("version = %s\n", version);
+	if (show_version)
+		printf("version = %s\n", version);
 	free(version);
 
 	read_or_die(buf, 1);
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index 420294a..d35ebf1 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -234,6 +234,11 @@
 extern int header_page_data_size;
 
 int parse_header_page(char *buf, unsigned long size);
+int trace_parse_common_type(void *data);
+struct event *trace_find_event(int id);
+unsigned long long
+raw_field_value(struct event *event, const char *name, void *data);
+void *raw_field_ptr(struct event *event, const char *name, void *data);
 
 void read_tracing_data(struct perf_counter_attr *pattrs, int nb_counters);