Merge "thermal: tsens8974: Configure TSENS as a wakeable interrupt"
diff --git a/arch/arm/boot/dts/msm8974-gpu.dtsi b/arch/arm/boot/dts/msm8974-gpu.dtsi
index 2751d76..ef4f611 100644
--- a/arch/arm/boot/dts/msm8974-gpu.dtsi
+++ b/arch/arm/boot/dts/msm8974-gpu.dtsi
@@ -36,7 +36,7 @@
qcom,msm-bus,num-paths = <2>;
qcom,msm-bus,vectors-KBps =
<26 512 0 0>, <89 604 0 0>,
- <26 512 0 1600000>, <89 604 0 3000000>,
+ <26 512 0 2200000>, <89 604 0 3000000>,
<26 512 0 4000000>, <89 604 0 4500000>,
<26 512 0 6400000>, <89 604 0 7600000>;
diff --git a/arch/arm/boot/dts/msm8974-pm.dtsi b/arch/arm/boot/dts/msm8974-v1-pm.dtsi
similarity index 100%
rename from arch/arm/boot/dts/msm8974-pm.dtsi
rename to arch/arm/boot/dts/msm8974-v1-pm.dtsi
diff --git a/arch/arm/boot/dts/msm8974-v1.dtsi b/arch/arm/boot/dts/msm8974-v1.dtsi
index eb69c51..7930547 100644
--- a/arch/arm/boot/dts/msm8974-v1.dtsi
+++ b/arch/arm/boot/dts/msm8974-v1.dtsi
@@ -18,6 +18,7 @@
/include/ "msm8974.dtsi"
/include/ "msm8974-v1-iommu.dtsi"
+/include/ "msm8974-v1-pm.dtsi"
/ {
android_usb@fc42b0c8 {
diff --git a/arch/arm/boot/dts/msm8974.dtsi b/arch/arm/boot/dts/msm8974.dtsi
index 9583809..1ef376f 100644
--- a/arch/arm/boot/dts/msm8974.dtsi
+++ b/arch/arm/boot/dts/msm8974.dtsi
@@ -11,7 +11,6 @@
*/
/include/ "skeleton.dtsi"
-/include/ "msm8974-pm.dtsi"
/include/ "msm8974-camera.dtsi"
/include/ "msm8974-coresight.dtsi"
/include/ "msm-gdsc.dtsi"
diff --git a/arch/arm/configs/msm8610_defconfig b/arch/arm/configs/msm8610_defconfig
index ac92e9d..5b0ff57 100644
--- a/arch/arm/configs/msm8610_defconfig
+++ b/arch/arm/configs/msm8610_defconfig
@@ -142,6 +142,7 @@
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_STUB=y
+CONFIG_REGULATOR_QPNP=y
CONFIG_ION=y
CONFIG_ION_MSM=y
CONFIG_FB=y
diff --git a/arch/arm/mach-msm/board-8064.c b/arch/arm/mach-msm/board-8064.c
index f115d79..a89ea61 100644
--- a/arch/arm/mach-msm/board-8064.c
+++ b/arch/arm/mach-msm/board-8064.c
@@ -2644,7 +2644,6 @@
&apq8064_device_hsusb_host,
&android_usb_device,
&msm_device_wcnss_wlan,
- &msm_device_iris_fm,
&apq8064_fmem_device,
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
@@ -2695,8 +2694,6 @@
&msm_bus_8064_cpss_fpb,
&msm_pil_dsps,
&msm_8960_q6_lpass,
- &msm_pil_vidc,
- &msm_gss,
&apq8064_rtb_device,
&apq8064_dcvs_device,
&apq8064_msm_gov_device,
@@ -2726,9 +2723,6 @@
&apq8064_device_uart_gsbi1,
&apq8064_device_uart_gsbi4,
&msm_device_sps_apq8064,
-#ifdef CONFIG_MSM_ROTATOR
- &msm_rotator_device,
-#endif
&msm8064_pc_cntr,
};
@@ -3976,12 +3970,10 @@
apq8064_common_init();
ethernet_init();
- msm_rotator_set_split_iommu_domain();
fsm8064_ep_pcie_init();
platform_add_devices(ep_devices, ARRAY_SIZE(ep_devices));
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
apq8064_init_gpu();
- platform_add_devices(apq8064_footswitch, apq8064_num_footswitch);
platform_device_register(&cdp_kp_pdev);
#ifdef CONFIG_MSM_CAMERA
apq8064_init_cam();
diff --git a/arch/arm/mach-msm/board-8226.c b/arch/arm/mach-msm/board-8226.c
index ea943f9..2b331d0 100644
--- a/arch/arm/mach-msm/board-8226.c
+++ b/arch/arm/mach-msm/board-8226.c
@@ -27,6 +27,7 @@
#ifdef CONFIG_ANDROID_PMEM
#include <linux/android_pmem.h>
#endif
+#include <linux/regulator/qpnp-regulator.h>
#include <asm/mach/map.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
@@ -104,6 +105,7 @@
msm_rpm_driver_init();
msm_lpmrs_module_init();
msm_spm_device_init();
+ qpnp_regulator_init();
if (machine_is_msm8226_rumi())
msm_clock_init(&msm8226_rumi_clock_init_data);
else
diff --git a/arch/arm/mach-msm/ocmem.c b/arch/arm/mach-msm/ocmem.c
index 534cdc6..1729742 100644
--- a/arch/arm/mach-msm/ocmem.c
+++ b/arch/arm/mach-msm/ocmem.c
@@ -381,27 +381,6 @@
pr_debug("ocmem: Disabled iface clock\n");
}
-/* Block-Remapper Clock Operations */
-int ocmem_enable_br_clock(void)
-{
- int ret;
-
- ret = clk_prepare_enable(ocmem_pdata->br_clk);
-
- if (ret) {
- pr_err("ocmem: Failed to enable br clock\n");
- return ret;
- }
- pr_debug("ocmem: Enabled br clock\n");
- return 0;
-}
-
-void ocmem_disable_br_clock(void)
-{
- clk_disable_unprepare(ocmem_pdata->br_clk);
- pr_debug("ocmem: Disabled br clock\n");
-}
-
static struct ocmem_plat_data * __devinit parse_dt_config
(struct platform_device *pdev)
{
@@ -762,7 +741,6 @@
struct device *dev = &pdev->dev;
struct clk *ocmem_core_clk = NULL;
struct clk *ocmem_iface_clk = NULL;
- struct clk *ocmem_br_clk = NULL;
if (!pdev->dev.of_node) {
dev_info(dev, "Missing Configuration in Device Tree\n");
@@ -799,16 +777,9 @@
if (IS_ERR_OR_NULL(ocmem_iface_clk))
ocmem_iface_clk = NULL;
- ocmem_br_clk = devm_clk_get(dev, "br_clk");
-
- if (IS_ERR(ocmem_br_clk)) {
- dev_err(dev, "Unable to get the BR clock\n");
- return PTR_ERR(ocmem_br_clk);
- }
ocmem_pdata->core_clk = ocmem_core_clk;
ocmem_pdata->iface_clk = ocmem_iface_clk;
- ocmem_pdata->br_clk = ocmem_br_clk;
platform_set_drvdata(pdev, ocmem_pdata);
diff --git a/arch/arm/mach-msm/ocmem_core.c b/arch/arm/mach-msm/ocmem_core.c
index 612c9fa..a011576 100644
--- a/arch/arm/mach-msm/ocmem_core.c
+++ b/arch/arm/mach-msm/ocmem_core.c
@@ -598,9 +598,6 @@
if (rc < 0)
return rc;
- rc = ocmem_enable_br_clock();
- if (rc < 0)
- return rc;
return 0;
}
diff --git a/arch/arm/mach-msm/ocmem_sched.c b/arch/arm/mach-msm/ocmem_sched.c
index 2cff74b..08f93e2 100644
--- a/arch/arm/mach-msm/ocmem_sched.c
+++ b/arch/arm/mach-msm/ocmem_sched.c
@@ -606,13 +606,6 @@
goto iface_clock_fail;
}
- if (is_remapped_access(req->owner)) {
- rc = ocmem_enable_br_clock();
-
- if (rc < 0)
- goto br_clock_fail;
- }
-
rc = ocmem_lock(req->owner, phys_to_offset(req->req_start), req->req_sz,
get_mode(req->owner));
@@ -636,9 +629,6 @@
process_map_fail:
ocmem_unlock(req->owner, phys_to_offset(req->req_start), req->req_sz);
lock_failed:
- if (is_remapped_access(req->owner))
- ocmem_disable_br_clock();
-br_clock_fail:
if (is_iface_access(req->owner))
ocmem_disable_iface_clock();
iface_clock_fail:
@@ -667,8 +657,6 @@
goto unlock_failed;
}
- if (is_remapped_access(req->owner))
- ocmem_disable_br_clock();
if (is_iface_access(req->owner))
ocmem_disable_iface_clock();
ocmem_disable_core_clock();
@@ -1432,17 +1420,14 @@
sched_dequeue(req);
mutex_unlock(&sched_mutex);
- if (!TEST_STATE(req, R_FREE)) {
-
+ if (TEST_STATE(req, R_MAPPED)) {
+ /* unmap the interval and clear the memory */
rc = process_unmap(req, req->req_start, req->req_end);
if (rc < 0)
return -EINVAL;
-
- rc = do_free(req);
- if (rc < 0)
- return -EINVAL;
}
+ /* Turn off the memory */
if (req->req_sz != 0) {
offset = phys_to_offset(req->req_start);
@@ -1456,6 +1441,13 @@
}
+ if (!TEST_STATE(req, R_FREE)) {
+ /* free the allocation */
+ rc = do_free(req);
+ if (rc < 0)
+ return -EINVAL;
+ }
+
inc_ocmem_stat(zone_of(req), NR_FREES);
ocmem_destroy_req(req);
diff --git a/arch/arm/mach-msm/qdsp6v2/audio_utils_aio.c b/arch/arm/mach-msm/qdsp6v2/audio_utils_aio.c
index 172c7eb..654f547 100644
--- a/arch/arm/mach-msm/qdsp6v2/audio_utils_aio.c
+++ b/arch/arm/mach-msm/qdsp6v2/audio_utils_aio.c
@@ -1317,6 +1317,8 @@
}
/* Flush DSP */
rc = audio_aio_flush(audio);
+ /* Flush input / Output buffer in software*/
+ audio_aio_ioport_reset(audio);
if (rc < 0) {
pr_err("%s[%p]:AUDIO_FLUSH interrupted\n",
__func__, audio);
diff --git a/drivers/gud/mobicore_driver/api.c b/drivers/gud/mobicore_driver/api.c
index 2506bc2..871f6cc 100644
--- a/drivers/gud/mobicore_driver/api.c
+++ b/drivers/gud/mobicore_driver/api.c
@@ -2,6 +2,7 @@
* MobiCore Driver Kernel Module.
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/gud/mobicore_driver/debug.h b/drivers/gud/mobicore_driver/debug.h
index f166605..0195877 100644
--- a/drivers/gud/mobicore_driver/debug.h
+++ b/drivers/gud/mobicore_driver/debug.h
@@ -14,8 +14,7 @@
extern struct device *mcd;
#define MCDRV_DBG_ERROR(dev, txt, ...) \
- dev_err(dev, "[%d] %s() ### ERROR: " txt, \
- task_pid_vnr(current), \
+ dev_err(dev, "MobiCore %s() ### ERROR: " txt, \
__func__, \
##__VA_ARGS__)
@@ -32,15 +31,12 @@
#endif
#define MCDRV_DBG(dev, txt, ...) \
- dev_info(dev, "[%d on CPU%d] %s(): " txt, \
- task_pid_vnr(current), \
- raw_smp_processor_id(), \
+ dev_info(dev, "MobiCore %s(): " txt, \
__func__, \
##__VA_ARGS__)
#define MCDRV_DBG_WARN(dev, txt, ...) \
- dev_warn(dev, "[%d] %s() WARNING: " txt, \
- task_pid_vnr(current), \
+ dev_warn(dev, "MobiCore %s() WARNING: " txt, \
__func__, \
##__VA_ARGS__)
diff --git a/drivers/gud/mobicore_driver/fastcall.h b/drivers/gud/mobicore_driver/fastcall.h
index 9f360c1..d5f9abc 100644
--- a/drivers/gud/mobicore_driver/fastcall.h
+++ b/drivers/gud/mobicore_driver/fastcall.h
@@ -15,6 +15,15 @@
#include "debug.h"
+/* Use the arch_extension sec pseudo op before switching to secure world */
+#if defined(__GNUC__) && \
+ defined(__GNUC_MINOR__) && \
+ defined(__GNUC_PATCHLEVEL__) && \
+ ((__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)) \
+ >= 40502
+#define MC_ARCH_EXTENSION_SEC
+#endif
+
/*
* MobiCore SMCs
*/
@@ -93,16 +102,18 @@
*/
static inline long _smc(void *data)
{
+ int ret = 0;
union fc_generic fc_generic;
- memcpy(&fc_generic, data, sizeof(union fc_generic));
+
if (data == NULL)
return -EPERM;
+
#ifdef MC_SMC_FASTCALL
{
- int ret = 0;
- ret = smc_fastcall(data, sizeof(union fc_generic));
+ ret = smc_fastcall(data, sizeof(fc_generic));
}
#else
+ memcpy(&fc_generic, data, sizeof(union fc_generic));
{
/* SVC expect values in r0-r3 */
register u32 reg0 __asm__("r0") = fc_generic.as_in.cmd;
@@ -128,7 +139,7 @@
memcpy(data, &fc_generic, sizeof(union fc_generic));
}
#endif
- return 0;
+ return ret;
}
/*
diff --git a/drivers/gud/mobicore_driver/logging.c b/drivers/gud/mobicore_driver/logging.c
index 089b91c..4160292 100644
--- a/drivers/gud/mobicore_driver/logging.c
+++ b/drivers/gud/mobicore_driver/logging.c
@@ -5,6 +5,7 @@
* buffer and the Linux log
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -51,17 +52,27 @@
uint32_t log_data; /* Value, if any */
};
+static bool prev_eol; /* Previous char was a EOL */
+static uint16_t prev_source; /* Previous Log source */
static uint32_t log_pos; /* MobiCore log previous position */
static struct mc_trace_buf *log_buf; /* MobiCore log buffer structure */
struct task_struct *log_thread; /* Log Thread task structure */
static char *log_line; /* Log Line buffer */
static uint32_t log_line_len; /* Log Line buffer current length */
+static int thread_err;
-static void log_eol(void)
+static void log_eol(uint16_t source)
{
if (!strnlen(log_line, LOG_LINE_SIZE))
return;
- dev_info(mcd, "%s\n", log_line);
+ prev_eol = true;
+ /* MobiCore Userspace */
+ if (prev_source)
+ dev_info(mcd, "%03x|%s\n", prev_source, log_line);
+ /* MobiCore kernel */
+ else
+ dev_info(mcd, "%s\n", log_line);
+
log_line_len = 0;
log_line[0] = 0;
}
@@ -70,53 +81,29 @@
* Collect chars in log_line buffer and output the buffer when it is full.
* No locking needed because only "mobicore_log" thread updates this buffer.
*/
-static void log_char(char ch)
+static void log_char(char ch, uint16_t source)
{
if (ch == '\n' || ch == '\r') {
- log_eol();
+ log_eol(source);
return;
}
- if (log_line_len >= LOG_LINE_SIZE - 1) {
- dev_info(mcd, "%s\n", log_line);
- log_line_len = 0;
- log_line[0] = 0;
- }
+ if (log_line_len >= LOG_LINE_SIZE - 1 || source != prev_source)
+ log_eol(source);
+
log_line[log_line_len] = ch;
log_line[log_line_len + 1] = 0;
log_line_len++;
-}
-
-/*
- * Put a string to the log line.
- */
-static void log_str(const char *s)
-{
- int i;
-
- for (i = 0; i < strnlen(s, LOG_LINE_SIZE); i++)
- log_char(s[i]);
-}
-
-static uint32_t process_v1log(void)
-{
- char *last_char = log_buf->buff + log_buf->write_pos;
- char *buff = log_buf->buff + log_pos;
- while (buff != last_char) {
- log_char(*(buff++));
- /* Wrap around */
- if (buff - (char *)log_buf >= log_size)
- buff = log_buf->buff;
- }
- return buff - log_buf->buff;
+ prev_eol = false;
+ prev_source = source;
}
static const uint8_t HEX2ASCII[16] = {
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', 'a', 'b', 'c', 'd', 'e', 'f' };
-static void dbg_raw_nro(uint32_t format, uint32_t value)
+static void dbg_raw_nro(uint32_t format, uint32_t value, uint16_t source)
{
int digits = 1;
uint32_t base = (format & LOG_INTEGER_DECIMAL) ? 10 : 16;
@@ -139,17 +126,17 @@
if (width > digits) {
char ch = (base == 10) ? ' ' : '0';
while (width > digits) {
- log_char(ch);
+ log_char(ch, source);
width--;
}
}
if (negative)
- log_char('-');
+ log_char('-', source);
while (digits-- > 0) {
uint32_t d = value / digit_base;
- log_char(HEX2ASCII[d]);
+ log_char(HEX2ASCII[d], source);
value = value - d * digit_base;
digit_base /= base;
}
@@ -157,36 +144,32 @@
static void log_msg(struct logmsg_struct *msg)
{
- unsigned char msgtxt[5];
- int mpos = 0;
-
switch (msg->ctrl & LOG_TYPE_MASK) {
case LOG_TYPE_CHAR: {
uint32_t ch;
ch = msg->log_data;
while (ch != 0) {
- msgtxt[mpos++] = ch&0xFF;
+ log_char(ch & 0xFF, msg->source);
ch >>= 8;
}
- msgtxt[mpos] = 0;
- log_str(msgtxt);
break;
}
case LOG_TYPE_INTEGER: {
- dbg_raw_nro(msg->ctrl, msg->log_data);
+ dbg_raw_nro(msg->ctrl, msg->log_data, msg->source);
break;
}
default:
break;
}
if (msg->ctrl & LOG_EOL)
- log_eol();
+ log_eol(msg->source);
}
-static uint32_t process_v2log(void)
+static uint32_t process_log(void)
{
char *last_msg = log_buf->buff + log_buf->write_pos;
char *buff = log_buf->buff + log_pos;
+
while (buff != last_msg) {
log_msg((struct logmsg_struct *)buff);
buff += sizeof(struct logmsg_struct);
@@ -201,19 +184,19 @@
/* log_worker() - Worker thread processing the log_buf buffer. */
static int log_worker(void *p)
{
- if (log_buf == NULL)
- return -EFAULT;
+ int ret = 0;
+ if (log_buf == NULL) {
+ ret = -EFAULT;
+ goto err_kthread;
+ }
while (!kthread_should_stop()) {
if (log_buf->write_pos == log_pos)
schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
switch (log_buf->version) {
- case 1:
- log_pos = process_v1log();
- break;
case 2:
- log_pos = process_v2log();
+ log_pos = process_log();
break;
default:
MCDRV_DBG_ERROR(mcd, "Unknown Mobicore log data");
@@ -222,11 +205,23 @@
* Stop the thread as we have no idea what
* happens next
*/
- return -EFAULT;
+ ret = -EFAULT;
+ goto err_kthread;
}
}
+err_kthread:
MCDRV_DBG(mcd, "Logging thread stopped!");
- return 0;
+ thread_err = ret;
+ /* Wait until the next kthread_stop() is called, if it was already
+ * called we just slip through, if there is an error signal it and
+ * wait to get the signal */
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ set_current_state(TASK_RUNNING);
+ return ret;
}
/*
@@ -239,6 +234,14 @@
if (log_thread == NULL || IS_ERR(log_thread))
return;
+ /* The thread itself is in some error condition so just get
+ * rid of it */
+ if (thread_err != 0) {
+ kthread_stop(log_thread);
+ log_thread = NULL;
+ return;
+ }
+
wake_up_process(log_thread);
}
@@ -258,6 +261,9 @@
log_thread = NULL;
log_line = NULL;
log_line_len = 0;
+ prev_eol = false;
+ prev_source = 0;
+ thread_err = 0;
/* Sanity check for the log size */
if (log_size < PAGE_SIZE)
@@ -271,11 +277,11 @@
return -ENOMEM;
}
- log_thread = kthread_create(log_worker, NULL, "mobicore_log");
+ log_thread = kthread_create(log_worker, NULL, "mc_log");
if (IS_ERR(log_thread)) {
MCDRV_DBG_ERROR(mcd, "MobiCore log thread creation failed!");
ret = -EFAULT;
- goto mobicore_log_setup_log_line;
+ goto err_free_line;
}
sched_setscheduler(log_thread, SCHED_IDLE, ¶m);
@@ -288,7 +294,7 @@
if (!log_buf) {
MCDRV_DBG_ERROR(mcd, "Failed to get page for logger!");
ret = -ENOMEM;
- goto mobicore_log_setup_kthread;
+ goto err_stop_kthread;
}
phys_log_buf = virt_to_phys(log_buf);
@@ -308,16 +314,17 @@
free_pages((unsigned long)log_buf, get_order(log_size));
log_buf = NULL;
ret = -EIO;
- goto mobicore_log_setup_kthread;
+ goto err_stop_kthread;
}
+ set_task_state(log_thread, TASK_INTERRUPTIBLE);
MCDRV_DBG(mcd, "fc_log Logger version %u\n", log_buf->version);
return 0;
-mobicore_log_setup_kthread:
+err_stop_kthread:
kthread_stop(log_thread);
log_thread = NULL;
-mobicore_log_setup_log_line:
+err_free_line:
kfree(log_line);
log_line = NULL;
return ret;
diff --git a/drivers/gud/mobicore_driver/main.c b/drivers/gud/mobicore_driver/main.c
index 1a745b3..3fc9e17 100644
--- a/drivers/gud/mobicore_driver/main.c
+++ b/drivers/gud/mobicore_driver/main.c
@@ -11,6 +11,7 @@
* fd = open(/dev/mobicore-user)
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -81,7 +82,7 @@
}
/* Frees the memory associated with a buffer */
-static int free_buffer(struct mc_buffer *buffer)
+static int free_buffer(struct mc_buffer *buffer, bool unlock)
{
if (buffer->handle == 0)
return -EINVAL;
@@ -89,16 +90,15 @@
if (buffer->addr == 0)
return -EINVAL;
- if (!atomic_dec_and_test(&buffer->usage)) {
+ MCDRV_DBG_VERBOSE(mcd,
+ "handle=%u phys_addr=0x%p, virt_addr=0x%p len=%u\n",
+ buffer->handle, buffer->phys, buffer->addr, buffer->len);
- MCDRV_DBG_VERBOSE(mcd, "Could not free buffer h=%u",
- buffer->handle);
+ if (!atomic_dec_and_test(&buffer->usage)) {
+ MCDRV_DBG_VERBOSE(mcd, "Could not free %u", buffer->handle);
return 0;
}
- MCDRV_DBG(mcd, "handle=%u phys_addr=0x%p, virt_addr=0x%p\n",
- buffer->handle, buffer->phys, buffer->addr);
-
list_del(&buffer->list);
free_continguous_pages(buffer->addr, buffer->order);
@@ -106,6 +106,37 @@
return 0;
}
+static uint32_t mc_find_cont_wsm_addr(struct mc_instance *instance, void *uaddr,
+ uint32_t *addr, uint32_t len)
+{
+ int ret = 0;
+ struct mc_buffer *buffer;
+
+ if (WARN(!instance, "No instance data available"))
+ return -EFAULT;
+
+ mutex_lock(&instance->lock);
+
+ mutex_lock(&ctx.bufs_lock);
+
+ /* search for the given handle in the buffers list */
+ list_for_each_entry(buffer, &ctx.cont_bufs, list) {
+ if (buffer->uaddr == uaddr && buffer->len == len) {
+ *addr = (uint32_t)buffer->addr;
+ goto found;
+ }
+ }
+
+ /* Coundn't find the buffer */
+ ret = -EINVAL;
+
+found:
+ mutex_unlock(&ctx.bufs_lock);
+ mutex_unlock(&instance->lock);
+
+ return ret;
+}
+
static uint32_t mc_find_cont_wsm(struct mc_instance *instance, uint32_t handle,
uint32_t *phys, uint32_t *len)
{
@@ -152,10 +183,16 @@
* Returns 0 if no error
*
*/
-static int __free_buffer(struct mc_instance *instance, uint32_t handle)
+static int __free_buffer(struct mc_instance *instance, uint32_t handle,
+ bool unlock)
{
int ret = 0;
struct mc_buffer *buffer;
+ void *uaddr = NULL;
+ size_t len = 0;
+#ifndef MC_VM_UNMAP
+ struct mm_struct *mm = current->mm;
+#endif
if (WARN(!instance, "No instance data available"))
return -EFAULT;
@@ -163,6 +200,46 @@
mutex_lock(&ctx.bufs_lock);
/* search for the given handle in the buffers list */
list_for_each_entry(buffer, &ctx.cont_bufs, list) {
+ if (buffer->handle == handle) {
+ uaddr = buffer->uaddr;
+ len = buffer->len;
+ goto found_buffer;
+ }
+ }
+ goto err;
+found_buffer:
+ if (!is_daemon(instance) || buffer->instance != instance)
+ goto err;
+ mutex_unlock(&ctx.bufs_lock);
+ /* Only unmap if the request is comming from the user space and
+ * it hasn't already been unmapped */
+ if (unlock == false && uaddr != NULL)
+#ifndef MC_VM_UNMAP
+ /* do_munmap must be done with mm->mmap_sem taken */
+ down_write(&mm->mmap_sem);
+ ret = do_munmap(mm, (long unsigned int)uaddr, len);
+ if (ret < 0) {
+ /* Something is not right if we end up here, better not
+ * clean the buffer so we just leak memory instead of
+ * creating security issues */
+ MCDRV_DBG_ERROR(mcd, "Memory can't be unmapped\n");
+ }
+ up_write(&mm->mmap_sem);
+ if (ret < 0)
+ return -EINVAL;
+#else
+ if (vm_munmap((long unsigned int)uaddr, len) < 0) {
+ /* Something is not right if we end up here, better not
+ * clean the buffer so we just leak memory instead of
+ * creating security issues */
+ MCDRV_DBG_ERROR(mcd, "Memory can't be unmapped\n");
+ return -EINVAL;
+ }
+#endif
+
+ mutex_lock(&ctx.bufs_lock);
+ /* search for the given handle in the buffers list */
+ list_for_each_entry(buffer, &ctx.cont_bufs, list) {
if (buffer->handle == handle)
goto del_buffer;
}
@@ -170,7 +247,7 @@
goto err;
del_buffer:
- ret = free_buffer(buffer);
+ ret = free_buffer(buffer, unlock);
err:
mutex_unlock(&ctx.bufs_lock);
return ret;
@@ -185,7 +262,7 @@
mutex_lock(&instance->lock);
- ret = __free_buffer(instance, handle);
+ ret = __free_buffer(instance, handle, false);
mutex_unlock(&instance->lock);
return ret;
}
@@ -253,8 +330,8 @@
INIT_LIST_HEAD(&cbuffer->list);
list_add(&cbuffer->list, &ctx.cont_bufs);
- MCDRV_DBG(mcd,
- "allocated phys=0x%p - 0x%p, size=%ld, kvirt=0x%p, h=%d\n",
+ MCDRV_DBG_VERBOSE(mcd,
+ "allocated phys=0x%p - 0x%p, size=%ld, kvirt=0x%p, h=%d\n",
phys, (void *)((unsigned int)phys+allocated_size),
allocated_size, addr, cbuffer->handle);
*buffer = cbuffer;
@@ -332,6 +409,7 @@
int ret = 0;
struct mc_l2_table *table = NULL;
struct task_struct *task = current;
+ uint32_t kbuff = 0x0;
if (WARN(!instance, "No instance data available"))
return -EFAULT;
@@ -341,7 +419,12 @@
return -EINVAL;
}
- table = mc_alloc_l2_table(instance, task, (void *)buffer, len);
+ MCDRV_DBG_VERBOSE(mcd, "buffer: %p, len=%08x\n", (void *)buffer, len);
+
+ if (!mc_find_cont_wsm_addr(instance, (void *)buffer, &kbuff, len))
+ table = mc_alloc_l2_table(instance, NULL, (void *)kbuff, len);
+ else
+ table = mc_alloc_l2_table(instance, task, (void *)buffer, len);
if (IS_ERR(table)) {
MCDRV_DBG_ERROR(mcd, "new_used_l2_table() failed\n");
@@ -421,7 +504,7 @@
/* Not a l2 table, then it must be a buffer */
if (ret == -EINVAL) {
/* Call the non locking variant! */
- ret = __free_buffer(instance, handle);
+ ret = __free_buffer(instance, handle, true);
}
mutex_unlock(&instance->lock);
@@ -471,8 +554,8 @@
struct mc_buffer *buffer = 0;
int ret = 0;
- MCDRV_DBG(mcd, "enter (vma start=0x%p, size=%ld, mci=%p)\n",
- (void *)vmarea->vm_start, len, ctx.mci_base.phys);
+ MCDRV_DBG_VERBOSE(mcd, "enter (vma start=0x%p, size=%ld, mci=%p)\n",
+ (void *)vmarea->vm_start, len, ctx.mci_base.phys);
if (WARN(!instance, "No instance data available"))
return -EFAULT;
@@ -496,7 +579,8 @@
return -EINVAL;
found:
- vmarea->vm_flags |= VM_RESERVED;
+ buffer->uaddr = (void *)vmarea->vm_start;
+ vmarea->vm_flags |= VM_IO;
/*
* Convert kernel address to user address. Kernel address begins
* at PAGE_OFFSET, user address range is below PAGE_OFFSET.
@@ -507,6 +591,10 @@
pfn = (unsigned int)paddr >> PAGE_SHIFT;
ret = (int)remap_pfn_range(vmarea, vmarea->vm_start, pfn,
buffer->len, vmarea->vm_page_prot);
+ /* If the remap failed then don't mark this buffer as marked
+ * since the unmaping will also fail */
+ if (ret)
+ buffer->uaddr = NULL;
mutex_unlock(&ctx.bufs_lock);
} else {
if (!is_daemon(instance))
@@ -516,7 +604,7 @@
if (!paddr)
return -EFAULT;
- vmarea->vm_flags |= VM_RESERVED;
+ vmarea->vm_flags |= VM_IO;
/*
* Convert kernel address to user address. Kernel address begins
* at PAGE_OFFSET, user address range is below PAGE_OFFSET.
@@ -614,8 +702,8 @@
map.reused = 0;
if (copy_to_user(uarg, &map, sizeof(map)))
ret = -EFAULT;
-
- ret = 0;
+ else
+ ret = 0;
break;
}
default:
@@ -754,6 +842,13 @@
break;
}
+ case MC_IO_LOG_SETUP: {
+#ifdef MC_MEM_TRACES
+ ret = mobicore_log_setup();
+#endif
+ break;
+ }
+
/* The rest is handled commonly by user IOCTL */
default:
ret = mc_fd_user_ioctl(file, cmd, arg);
@@ -887,7 +982,7 @@
list_for_each_entry_safe(buffer, tmp, &ctx.cont_bufs, list) {
if (buffer->instance == instance) {
buffer->instance = NULL;
- free_buffer(buffer);
+ free_buffer(buffer, false);
}
}
mutex_unlock(&ctx.bufs_lock);
@@ -1097,10 +1192,6 @@
goto free_admin;
}
-#ifdef MC_MEM_TRACES
- mobicore_log_setup();
-#endif
-
/* initialize event counter for signaling of an IRQ to zero */
atomic_set(&ctx.isr_counter, 0);
@@ -1159,6 +1250,7 @@
module_init(mobicore_init);
module_exit(mobicore_exit);
MODULE_AUTHOR("Giesecke & Devrient GmbH");
+MODULE_AUTHOR("Trustonic Limited");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MobiCore driver");
diff --git a/drivers/gud/mobicore_driver/main.h b/drivers/gud/mobicore_driver/main.h
index e23c516..2c316bc 100644
--- a/drivers/gud/mobicore_driver/main.h
+++ b/drivers/gud/mobicore_driver/main.h
@@ -27,7 +27,7 @@
/* Instance data for MobiCore Daemon and TLCs. */
struct mc_instance {
- /* Instance lock */
+ /* lock for the instance */
struct mutex lock;
/* unique handle */
unsigned int handle;
@@ -48,6 +48,8 @@
atomic_t usage;
/* virtual Kernel start address */
void *addr;
+ /* virtual Userspace start address */
+ void *uaddr;
/* physical start address */
void *phys;
/* order of number of pages */
diff --git a/drivers/gud/mobicore_driver/mem.c b/drivers/gud/mobicore_driver/mem.c
index da711ce..1fe351b 100644
--- a/drivers/gud/mobicore_driver/mem.c
+++ b/drivers/gud/mobicore_driver/mem.c
@@ -11,6 +11,7 @@
* which has to be created by the fd = open(/dev/mobicore) command.
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -355,14 +356,6 @@
MCDRV_DBG_VERBOSE(mcd, "WSM addr=0x%p, len=0x%08x\n", wsm_buffer,
wsm_len);
- /*
- * Check if called from kernel space and if
- * wsm_buffer is actually vmalloced or not
- */
- if (task == NULL && !is_vmalloc_addr(wsm_buffer)) {
- MCDRV_DBG_ERROR(mcd, "WSM addr is not a vmalloc address");
- return -EINVAL;
- }
/* calculate page usage */
virt_addr_page = (void *)(((unsigned long)(wsm_buffer)) & PAGE_MASK);
@@ -405,6 +398,20 @@
return ret;
}
}
+ /* Request comes from kernel space(cont buffer) */
+ else if (task == NULL && !is_vmalloc_addr(wsm_buffer)) {
+ void *uaddr = wsm_buffer;
+ for (i = 0; i < nr_of_pages; i++) {
+ page = virt_to_page(uaddr);
+ if (!page) {
+ MCDRV_DBG_ERROR(mcd, "failed to map address");
+ return -EINVAL;
+ }
+ get_page(page);
+ l2table_as_array_of_pointers_to_page[i] = page;
+ uaddr += PAGE_SIZE;
+ }
+ }
/* Request comes from kernel space(vmalloc buffer) */
else {
void *uaddr = wsm_buffer;
diff --git a/drivers/gud/mobicore_driver/ops.c b/drivers/gud/mobicore_driver/ops.c
index 509b4e9..b44a842 100644
--- a/drivers/gud/mobicore_driver/ops.c
+++ b/drivers/gud/mobicore_driver/ops.c
@@ -11,6 +11,7 @@
* which has to be created by the fd = open(/dev/mobicore) command.
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -20,6 +21,8 @@
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/cpu.h>
#include "main.h"
#include "fastcall.h"
@@ -27,6 +30,29 @@
#include "mem.h"
#include "debug.h"
+struct fastcall_work_struct {
+ struct work_struct work;
+ void *data;
+};
+
+static void fastcall_work_func(struct work_struct *work)
+{
+ struct fastcall_work_struct *fc_work =
+ container_of(work, struct fastcall_work_struct, work);
+ _smc(fc_work->data);
+}
+
+void mc_fastcall(void *data)
+{
+ struct fastcall_work_struct work = {
+ .data = data,
+ };
+ INIT_WORK(&work.work, fastcall_work_func);
+ schedule_work_on(0, &work.work);
+
+ flush_work(&work.work);
+}
+
int mc_info(uint32_t ext_info_id, uint32_t *state, uint32_t *ext_info)
{
int ret = 0;
diff --git a/drivers/gud/mobicore_driver/ops.h b/drivers/gud/mobicore_driver/ops.h
index 673399f..efe5f05 100644
--- a/drivers/gud/mobicore_driver/ops.h
+++ b/drivers/gud/mobicore_driver/ops.h
@@ -22,9 +22,6 @@
int mc_init(uint32_t base, uint32_t nq_offset, uint32_t nq_length,
uint32_t mcp_offset, uint32_t mcp_length);
-static inline void mc_fastcall(void *data)
-{
- work_on_cpu(0, _smc, data);
-}
+void mc_fastcall(void *data);
#endif /* _MC_OPS_H_ */
diff --git a/drivers/gud/mobicore_driver/platforms/msm8960_surf_std/platform.h b/drivers/gud/mobicore_driver/platforms/msm8960_surf_std/platform.h
index 9efa026..7febcb6 100644
--- a/drivers/gud/mobicore_driver/platforms/msm8960_surf_std/platform.h
+++ b/drivers/gud/mobicore_driver/platforms/msm8960_surf_std/platform.h
@@ -3,6 +3,7 @@
* its internal structures and defines.
*
* <-- Copyright Giesecke & Devrient GmbH 2009-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -35,6 +36,11 @@
}
/* Enable mobicore mem traces */
-#define MC_MEM_TRACES
+/* #define MC_MEM_TRACES */
+
+/* Enable the use of vm_unamp instead of the deprecated do_munmap
+ * and other 3.7 features
+ */
+#define MC_VM_UNMAP
#endif /* _MC_PLATFORM_H_ */
diff --git a/drivers/gud/mobicore_driver/public/mc_kernel_api.h b/drivers/gud/mobicore_driver/public/mc_kernel_api.h
index 7a038c4..cca0636 100644
--- a/drivers/gud/mobicore_driver/public/mc_kernel_api.h
+++ b/drivers/gud/mobicore_driver/public/mc_kernel_api.h
@@ -2,6 +2,7 @@
* Interface to be used by module MobiCoreKernelAPI.
*
* <-- Copyright Giesecke & Devrient GmbH 2010-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/gud/mobicore_driver/public/mc_linux.h b/drivers/gud/mobicore_driver/public/mc_linux.h
index 99b7769..bb95c26 100644
--- a/drivers/gud/mobicore_driver/public/mc_linux.h
+++ b/drivers/gud/mobicore_driver/public/mc_linux.h
@@ -11,6 +11,7 @@
* "insmod mcDrvModule.ko".
*
* <-- Copyright Giesecke & Devrient GmbH 2010-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -206,4 +207,9 @@
* Only available to the daemon */
#define MC_IO_RESOLVE_CONT_WSM _IOWR(MC_IOC_MAGIC, 16, struct mc_ioctl_execute)
+/*
+ * Setup the mem traces when called.
+ * Only available to the daemon */
+#define MC_IO_LOG_SETUP _IO(MC_IOC_MAGIC, 17)
+
#endif /* _MC_LINUX_H_ */
diff --git a/drivers/gud/mobicore_driver/public/version.h b/drivers/gud/mobicore_driver/public/version.h
index b08dd95..591ca3d 100644
--- a/drivers/gud/mobicore_driver/public/version.h
+++ b/drivers/gud/mobicore_driver/public/version.h
@@ -1,5 +1,6 @@
/*
* <-- Copyright Giesecke & Devrient GmbH 2010-2012 -->
+ * <-- Copyright Trustonic Limited 2013 -->
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
diff --git a/drivers/gud/mobicore_kernelapi/include/mcinq.h b/drivers/gud/mobicore_kernelapi/include/mcinq.h
index b874925..34216a7 100644
--- a/drivers/gud/mobicore_kernelapi/include/mcinq.h
+++ b/drivers/gud/mobicore_kernelapi/include/mcinq.h
@@ -112,6 +112,6 @@
struct notification_queue_header hdr;
/* Notification elements. */
struct notification notification[MIN_NQ_ELEM];
-} ;
+};
#endif /* _MCINQ_H_ */
diff --git a/drivers/gud/mobicore_kernelapi/main.c b/drivers/gud/mobicore_kernelapi/main.c
index 50359b1..73de93a 100644
--- a/drivers/gud/mobicore_kernelapi/main.c
+++ b/drivers/gud/mobicore_kernelapi/main.c
@@ -139,13 +139,27 @@
static int __init mcapi_init(void)
{
+ /* struct netlink_kernel_cfg netlink_cfg; */
+
dev_set_name(mc_kapi, "mcapi");
dev_info(mc_kapi, "Mobicore API module initialized!\n");
+ /*
+ * netlink_cfg.groups = 0;
+ * netlink_cfg.flags = 0;
+ * netlink_cfg.input = mcapi_callback;
+ * netlink_cfg.cb_mutex = NULL;
+ * netlink_cfg.bind = NULL;
+ */
mod_ctx = kzalloc(sizeof(struct mc_kernelapi_ctx), GFP_KERNEL);
/* start kernel thread */
+
+ /*
+ * mod_ctx->sk = netlink_kernel_create(&init_net, MC_DAEMON_NETLINK,
+ * &netlink_cfg);
+ */
mod_ctx->sk = netlink_kernel_create(&init_net, MC_DAEMON_NETLINK, 0,
mcapi_callback, NULL, THIS_MODULE);
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 45c67c0..c78eec3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -957,4 +957,46 @@
To compile this driver as a module, choose M here: the
module will be called gen_vkeys.
+config TOUCHSCREEN_SYNAPTICS_I2C_RMI4
+ tristate "Synaptics DSX I2C touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Synaptics DSX I2C touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called synaptics_i2c_rmi4.
+
+config TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV
+ tristate "Synaptics I2C touchscreen rmi device"
+ depends on TOUCHSCREEN_SYNAPTICS_I2C_RMI4
+ help
+ This enables support for character device channel for Synaptics
+ RMI4 touchscreens.
+
+ Say Y here if you have a Synaptics DSX I2C touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called synaptics_dsx_rmi4_dev.
+
+config TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE
+ tristate "Synaptics I2C touchscreen firmware update"
+ depends on TOUCHSCREEN_SYNAPTICS_I2C_RMI4
+ help
+ This enables support for firmware update for Synaptics RMI4
+ touchscreens.
+
+ Say Y here if you have a Synaptics DSX I2C touchscreen
+ connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called synaptics_dsx_fw_update.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 42b25fe..ad43bbf 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -81,3 +81,6 @@
obj-$(CONFIG_TOUCHSCREEN_CY8C_TS) += cy8c_ts.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C_QC) += cyttsp-i2c-qc.o
obj-$(CONFIG_TOUCHSCREEN_FT5X06) += ft5x06_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV) += synaptics_rmi_dev.o
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE) += synaptics_fw_update.o
diff --git a/kernel/drivers/input/touchscreen/synaptics_fw_update.c b/drivers/input/touchscreen/synaptics_fw_update.c
similarity index 86%
rename from kernel/drivers/input/touchscreen/synaptics_fw_update.c
rename to drivers/input/touchscreen/synaptics_fw_update.c
index 4867d1f..c447231 100644
--- a/kernel/drivers/input/touchscreen/synaptics_fw_update.c
+++ b/drivers/input/touchscreen/synaptics_fw_update.c
@@ -30,7 +30,10 @@
#define DEBUG_FW_UPDATE
#define SHOW_PROGRESS
-#define FW_IMAGE_NAME "PR12345678.img"
+#define FW_IMAGE_NAME "PR1063486-s7301_00000000.img"
+#define MAX_FIRMWARE_ID_LEN 10
+#define FORCE_UPDATE false
+#define INSIDE_FIRMWARE_UPDATE
#define CHECKSUM_OFFSET 0x00
#define BOOTLOADER_VERSION_OFFSET 0x07
@@ -73,6 +76,12 @@
CMD_ENABLE_FLASH_PROG = 0xF,
};
+enum flash_area {
+ NONE,
+ UI_FIRMWARE,
+ CONFIG_AREA
+};
+
#define SLEEP_MODE_NORMAL (0x00)
#define SLEEP_MODE_SENSOR_SLEEP (0x01)
#define SLEEP_MODE_RESERVED0 (0x02)
@@ -81,9 +90,9 @@
#define ENABLE_WAIT_MS (1 * 1000)
#define WRITE_WAIT_MS (3 * 1000)
#define ERASE_WAIT_MS (5 * 1000)
+#define RESET_WAIT_MS (500)
-#define MIN_SLEEP_TIME_US 50
-#define MAX_SLEEP_TIME_US 100
+#define SLEEP_TIME_US 50
static ssize_t fwu_sysfs_show_image(struct file *data_file,
struct kobject *kobj, struct bin_attribute *attributes,
@@ -126,6 +135,9 @@
static ssize_t fwu_sysfs_disp_config_block_count_show(struct device *dev,
struct device_attribute *attr, char *buf);
+static ssize_t fwu_sysfs_config_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
static int fwu_wait_for_idle(int timeout_ms);
struct image_header {
@@ -204,6 +216,7 @@
struct synaptics_rmi4_fwu_handle {
bool initialized;
+ bool force_update;
char product_id[SYNAPTICS_RMI4_PRODUCT_ID_SIZE + 1];
unsigned int image_size;
unsigned int data_pos;
@@ -231,6 +244,8 @@
struct synaptics_rmi4_data *rmi4_data;
struct f34_flash_control flash_control;
struct f34_flash_properties flash_properties;
+ struct workqueue_struct *fwu_workqueue;
+ struct delayed_work fwu_work;
};
static struct bin_attribute dev_attr_data = {
@@ -277,6 +292,9 @@
__ATTR(dispconfigblockcount, S_IRUGO,
fwu_sysfs_disp_config_block_count_show,
synaptics_rmi4_store_error),
+ __ATTR(config_id, S_IRUGO,
+ fwu_sysfs_config_id_show,
+ synaptics_rmi4_store_error),
};
static struct synaptics_rmi4_fwu_handle *fwu;
@@ -313,53 +331,6 @@
return;
}
-static int fwu_check_version(void)
-{
- int retval;
- unsigned char firmware_id[4];
- unsigned char config_id[4];
- struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client;
-
- /* device firmware id */
- retval = fwu->fn_ptr->read(fwu->rmi4_data,
- fwu->f01_fd.query_base_addr + 18,
- firmware_id,
- sizeof(firmware_id));
- if (retval < 0) {
- dev_err(&i2c_client->dev,
- "Failed to read firmware ID (code %d).\n", retval);
- return retval;
- }
- firmware_id[3] = 0;
-
- dev_info(&i2c_client->dev, "Device firmware ID%d\n",
- extract_uint(firmware_id));
-
- /* device config id */
- retval = fwu->fn_ptr->read(fwu->rmi4_data,
- fwu->f34_fd.ctrl_base_addr,
- config_id,
- sizeof(config_id));
- if (retval < 0) {
- dev_err(&i2c_client->dev,
- "Failed to read config ID (code %d).\n", retval);
- return retval;
- }
-
- dev_info(&i2c_client->dev,
- "Device config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n",
- config_id[0], config_id[1], config_id[2], config_id[3]);
-
- /* .img config id */
- dev_info(&i2c_client->dev,
- ".img config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n",
- fwu->config_data[0],
- fwu->config_data[1],
- fwu->config_data[2],
- fwu->config_data[3]);
- return 0;
-}
-
static int fwu_read_f01_device_status(struct f01_device_status *status)
{
int retval;
@@ -407,7 +378,7 @@
return retval;
}
- dev_info(&i2c_client->dev, "%s perm:%d, bl%d, display:%d\n",
+ dev_info(&i2c_client->dev, "%s perm:%d, bl:%d, display:%d\n",
__func__,
fwu->flash_properties.has_perm_config,
fwu->flash_properties.has_bl_config,
@@ -506,25 +477,13 @@
static int fwu_reset_device(void)
{
int retval;
- unsigned char reset = 0x01;
#ifdef DEBUG_FW_UPDATE
- dev_info(&fwu->rmi4_data->i2c_client->dev, "Reset device\n");
+ dev_info(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Reset device\n",
+ __func__);
#endif
- retval = fwu->fn_ptr->write(fwu->rmi4_data,
- fwu->f01_fd.cmd_base_addr,
- &reset,
- sizeof(reset));
- if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Failed to reset device (addr : 0x%02x)\n",
- __func__, fwu->f01_fd.cmd_base_addr);
- return retval;
- }
-
- fwu_wait_for_idle(WRITE_WAIT_MS);
-
retval = fwu->rmi4_data->reset_device(fwu->rmi4_data);
if (retval < 0) {
dev_err(&fwu->rmi4_data->i2c_client->dev,
@@ -539,37 +498,34 @@
{
int retval;
+ fwu->flash_control.data[0] = cmd;
retval = fwu->fn_ptr->write(fwu->rmi4_data,
fwu->addr_f34_flash_control,
- &cmd,
- sizeof(cmd));
+ fwu->flash_control.data,
+ sizeof(fwu->flash_control.data));
if (retval < 0) {
dev_err(&fwu->rmi4_data->i2c_client->dev,
"%s: Failed to write command 0x%02x\n",
- __func__, cmd);
+ __func__, fwu->flash_control.data[0]);
return retval;
}
return 0;
}
-static unsigned char fwu_check_flash_status(void)
-{
- fwu_read_f34_flash_status();
- return fwu->flash_control.status;
-}
-
static int fwu_wait_for_idle(int timeout_ms)
{
int count = 0;
- int timeout_count = ((timeout_ms * 1000) / MAX_SLEEP_TIME_US) + 1;
-
+ int timeout_count = ((timeout_ms * 1000) / SLEEP_TIME_US) + 1;
do {
- if (fwu_read_interrupt_status() > 0)
+ if (fwu->flash_control.command == 0x00)
return 0;
- usleep_range(MIN_SLEEP_TIME_US, MAX_SLEEP_TIME_US);
- count++;
- } while (count < timeout_count);
+ usleep_range(SLEEP_TIME_US, SLEEP_TIME_US + 100);
+ } while (count++ < timeout_count);
+
+ fwu_read_f34_flash_status();
+ if (fwu->flash_control.command == 0x00)
+ return 0;
dev_err(&fwu->rmi4_data->i2c_client->dev,
"%s: Timed out waiting for idle status\n",
@@ -578,6 +534,133 @@
return -ETIMEDOUT;
}
+static enum flash_area fwu_go_nogo(void)
+{
+ int retval = 0;
+ int index = 0;
+ int deviceFirmwareID;
+ int imageConfigID;
+ int deviceConfigID;
+ unsigned long imageFirmwareID;
+ unsigned char firmware_id[4];
+ unsigned char config_id[4];
+ char *strptr;
+ char *imagePR = kzalloc(sizeof(MAX_FIRMWARE_ID_LEN), GFP_KERNEL);
+ enum flash_area flash_area = NONE;
+ struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client;
+ struct f01_device_status f01_device_status;
+
+ if (fwu->force_update) {
+ flash_area = UI_FIRMWARE;
+ goto exit;
+ }
+
+ retval = fwu_read_f01_device_status(&f01_device_status);
+ if (retval < 0) {
+ flash_area = NONE;
+ goto exit;
+ }
+
+ imagePR = kzalloc(sizeof(MAX_FIRMWARE_ID_LEN), GFP_KERNEL);
+
+ /* Force update firmware when device is in bootloader mode */
+ if (f01_device_status.flash_prog) {
+ dev_info(&i2c_client->dev,
+ "%s: In flash prog mode\n",
+ __func__);
+ flash_area = UI_FIRMWARE;
+ goto exit;
+ }
+
+
+ /* device firmware id */
+ retval = fwu->fn_ptr->read(fwu->rmi4_data,
+ fwu->f01_fd.query_base_addr + 18,
+ firmware_id,
+ sizeof(firmware_id));
+ if (retval < 0) {
+ dev_err(&i2c_client->dev,
+ "Failed to read firmware ID (code %d).\n", retval);
+ goto exit;
+ }
+ firmware_id[3] = 0;
+ deviceFirmwareID = extract_uint(firmware_id);
+
+ /* .img firmware id */
+ strptr = strstr(FW_IMAGE_NAME, "PR");
+ if (!strptr) {
+ dev_err(&i2c_client->dev,
+ "No valid PR number (PRxxxxxxx)" \
+ "found in image file name...\n");
+ goto exit;
+ }
+
+ strptr += 2;
+ while (strptr[index] >= '0' && strptr[index] <= '9') {
+ imagePR[index] = strptr[index];
+ index++;
+ }
+ imagePR[index] = 0;
+
+ retval = kstrtoul(imagePR, 10, &imageFirmwareID);
+ if (retval == -EINVAL) {
+ dev_err(&i2c_client->dev,
+ "invalid image firmware id...\n");
+ goto exit;
+ }
+
+ dev_info(&i2c_client->dev,
+ "Device firmware id %d, .img firmware id %d\n",
+ deviceFirmwareID,
+ (unsigned int)imageFirmwareID);
+ if (imageFirmwareID > deviceFirmwareID) {
+ flash_area = UI_FIRMWARE;
+ goto exit;
+ }
+
+ /* device config id */
+ retval = fwu->fn_ptr->read(fwu->rmi4_data,
+ fwu->f34_fd.ctrl_base_addr,
+ config_id,
+ sizeof(config_id));
+ if (retval < 0) {
+ dev_err(&i2c_client->dev,
+ "Failed to read config ID (code %d).\n", retval);
+ flash_area = NONE;
+ goto exit;
+ }
+ deviceConfigID = extract_uint(config_id);
+
+ dev_info(&i2c_client->dev,
+ "Device config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n",
+ config_id[0], config_id[1], config_id[2], config_id[3]);
+
+ /* .img config id */
+ dev_info(&i2c_client->dev,
+ ".img config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n",
+ fwu->config_data[0],
+ fwu->config_data[1],
+ fwu->config_data[2],
+ fwu->config_data[3]);
+ imageConfigID = extract_uint(fwu->config_data);
+
+ if (imageConfigID > deviceConfigID) {
+ flash_area = CONFIG_AREA;
+ goto exit;
+ }
+
+exit:
+ kfree(imagePR);
+ if (flash_area == NONE)
+ dev_info(&i2c_client->dev,
+ "Nothing needs to be updated\n");
+ else
+ dev_info(&i2c_client->dev,
+ "Update %s block\n",
+ flash_area == UI_FIRMWARE ? "UI FW" : "CONFIG");
+ return flash_area;
+}
+
static int fwu_scan_pdt(void)
{
int retval;
@@ -649,16 +732,25 @@
int retval;
unsigned char block_offset[] = {0, 0};
unsigned short block_num;
+ struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client;
#ifdef SHOW_PROGRESS
unsigned int progress = (command == CMD_WRITE_CONFIG_BLOCK) ?
10 : 100;
#endif
+
+#ifdef DEBUG_FW_UPDATE
+ dev_info(&i2c_client->dev,
+ "%s: Start to update %s blocks\n",
+ __func__,
+ command == CMD_WRITE_CONFIG_BLOCK ?
+ "config" : "firmware");
+#endif
retval = fwu->fn_ptr->write(fwu->rmi4_data,
fwu->f34_fd.data_base_addr + BLOCK_NUMBER_OFFSET,
block_offset,
sizeof(block_offset));
if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
+ dev_err(&i2c_client->dev,
"%s: Failed to write to block number registers\n",
__func__);
return retval;
@@ -667,20 +759,19 @@
for (block_num = 0; block_num < block_cnt; block_num++) {
#ifdef SHOW_PROGRESS
if (block_num % progress == 0)
- dev_info(&fwu->rmi4_data->i2c_client->dev,
- "%s: update %s %3d / %3d\n",
- __func__,
- command == CMD_WRITE_CONFIG_BLOCK ?
- "config" : "firmware",
- block_num,
- block_cnt);
+ dev_info(&i2c_client->dev,
+ "%s: update %s %3d / %3d\n",
+ __func__,
+ command == CMD_WRITE_CONFIG_BLOCK ?
+ "config" : "firmware",
+ block_num, block_cnt);
#endif
retval = fwu->fn_ptr->write(fwu->rmi4_data,
fwu->f34_fd.data_base_addr + BLOCK_DATA_OFFSET,
block_ptr,
fwu->block_size);
if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
+ dev_err(&i2c_client->dev,
"%s: Failed to write block data (block %d)\n",
__func__, block_num);
return retval;
@@ -688,7 +779,7 @@
retval = fwu_write_f34_command(command);
if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
+ dev_err(&i2c_client->dev,
"%s: Failed to write command for block %d\n",
__func__, block_num);
return retval;
@@ -696,30 +787,28 @@
retval = fwu_wait_for_idle(WRITE_WAIT_MS);
if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Failed to wait for idle status \
- (block %d)\n",
- __func__, block_num);
+ dev_err(&i2c_client->dev,
+ "%s: Failed to wait for idle status (block %d)\n",
+ __func__, block_num);
return retval;
}
- retval = fwu_check_flash_status();
- if (retval != 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Flash block %d status %d\n",
+ if (fwu->flash_control.status != 0x00) {
+ dev_err(&i2c_client->dev,
+ "%s: Flash block %d failed, status 0x%02X\n",
__func__, block_num, retval);
- return -1;
+ return retval;
}
+
block_ptr += fwu->block_size;
}
#ifdef SHOW_PROGRESS
- dev_info(&fwu->rmi4_data->i2c_client->dev,
- "%s: update %s %3d / %3d\n",
- __func__,
- command == CMD_WRITE_CONFIG_BLOCK ?
- "config" : "firmware",
- block_cnt,
- block_cnt);
+ dev_info(&i2c_client->dev,
+ "%s: update %s %3d / %3d\n",
+ __func__,
+ command == CMD_WRITE_CONFIG_BLOCK ?
+ "config" : "firmware",
+ block_cnt, block_cnt);
#endif
return 0;
}
@@ -741,7 +830,10 @@
int retval;
#ifdef DEBUG_FW_UPDATE
- dev_info(&fwu->rmi4_data->i2c_client->dev, "Write bootloader ID\n");
+ dev_info(&fwu->rmi4_data->i2c_client->dev,
+ "Write bootloader ID 0x%02X 0x%02X\n",
+ fwu->bootloader_id[0],
+ fwu->bootloader_id[1]);
#endif
retval = fwu->fn_ptr->write(fwu->rmi4_data,
fwu->f34_fd.data_base_addr + BLOCK_DATA_OFFSET,
@@ -789,17 +881,6 @@
if (retval < 0)
return retval;
- retval = fwu_read_f01_device_status(&f01_device_status);
- if (retval < 0)
- return retval;
-
- if (!f01_device_status.flash_prog) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Program enabled bit not set\n",
- __func__);
- return -EINVAL;
- }
-
retval = fwu_scan_pdt();
if (retval < 0)
return retval;
@@ -879,9 +960,12 @@
if (retval < 0)
return retval;
- dev_dbg(&fwu->rmi4_data->i2c_client->dev,
- "%s: Idle status detected\n",
- __func__);
+ if (fwu->flash_control.status != 0x00) {
+ dev_err(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Erase all command failed, status 0x%02X\n",
+ __func__, retval);
+ return -1;
+ }
if (fwu->firmware_data) {
retval = fwu_write_firmware();
@@ -900,90 +984,6 @@
return retval;
}
-static int fwu_start_reflash(void)
-{
- int retval;
- struct image_header header;
- const unsigned char *fw_image;
- const struct firmware *fw_entry = NULL;
- struct f01_device_status f01_device_status;
-
- pr_notice("%s: Start of reflash process\n", __func__);
-
- if (fwu->ext_data_source)
- fw_image = fwu->ext_data_source;
- else {
- dev_dbg(&fwu->rmi4_data->i2c_client->dev,
- "%s: Requesting firmware image %s\n",
- __func__, FW_IMAGE_NAME);
-
- retval = request_firmware(&fw_entry, FW_IMAGE_NAME,
- &fwu->rmi4_data->i2c_client->dev);
- if (retval != 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Firmware image %s not available\n",
- __func__, FW_IMAGE_NAME);
- retval = -EINVAL;
- goto exit;
- }
-
- dev_dbg(&fwu->rmi4_data->i2c_client->dev,
- "%s: Firmware image size = %d\n",
- __func__, fw_entry->size);
-
- fw_image = fw_entry->data;
- }
-
- parse_header(&header, fw_image);
-
- if (header.image_size)
- fwu->firmware_data = fw_image + FW_IMAGE_OFFSET;
- if (header.config_size) {
- fwu->config_data = fw_image + FW_IMAGE_OFFSET +
- header.image_size;
- }
-
- fwu->fn_ptr->enable(fwu->rmi4_data, false);
-
- fwu_check_version();
-
- retval = fwu_do_reflash();
- if (retval < 0) {
- dev_err(&fwu->rmi4_data->i2c_client->dev,
- "%s: Failed to do reflash\n",
- __func__);
- }
-
- /* reset device */
- fwu_reset_device();
-
- /* check device status */
- retval = fwu_read_f01_device_status(&f01_device_status);
- if (retval < 0)
- goto exit;
-
- dev_info(&fwu->rmi4_data->i2c_client->dev, "Device is in %s mode\n",
- f01_device_status.flash_prog == 1 ? "bootloader" : "UI");
- if (f01_device_status.flash_prog)
- dev_info(&fwu->rmi4_data->i2c_client->dev, "Flash status %d\n",
- f01_device_status.status_code);
-
- if (f01_device_status.flash_prog) {
- dev_info(&fwu->rmi4_data->i2c_client->dev,
- "%s: Device is in flash prog mode 0x%02X\n",
- __func__, f01_device_status.status_code);
- retval = 0;
- goto exit;
- }
- fwu->fn_ptr->enable(fwu->rmi4_data, true);
- if (fw_entry)
- release_firmware(fw_entry);
-
- pr_notice("%s: End of reflash process\n", __func__);
-exit:
- return retval;
-}
-
static int fwu_do_write_config(void)
{
int retval;
@@ -1205,6 +1205,110 @@
return retval;
}
+static int fwu_start_reflash(void)
+{
+ int retval;
+ struct image_header header;
+ const unsigned char *fw_image;
+ const struct firmware *fw_entry = NULL;
+ struct f01_device_status f01_device_status;
+ enum flash_area flash_area;
+
+ pr_notice("%s: Start of reflash process\n", __func__);
+
+ if (fwu->ext_data_source)
+ fw_image = fwu->ext_data_source;
+ else {
+ dev_dbg(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Requesting firmware image %s\n",
+ __func__, FW_IMAGE_NAME);
+
+ retval = request_firmware(&fw_entry, FW_IMAGE_NAME,
+ &fwu->rmi4_data->i2c_client->dev);
+ if (retval != 0) {
+ dev_err(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Firmware image %s not available\n",
+ __func__, FW_IMAGE_NAME);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ dev_dbg(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Firmware image size = %d\n",
+ __func__, fw_entry->size);
+
+ fw_image = fw_entry->data;
+ }
+
+ parse_header(&header, fw_image);
+
+ if (header.image_size)
+ fwu->firmware_data = fw_image + FW_IMAGE_OFFSET;
+ if (header.config_size) {
+ fwu->config_data = fw_image + FW_IMAGE_OFFSET +
+ header.image_size;
+ }
+
+ if (fwu->ext_data_source)
+ flash_area = UI_FIRMWARE;
+ else
+ flash_area = fwu_go_nogo();
+
+ switch (flash_area) {
+ case NONE:
+ dev_info(&fwu->rmi4_data->i2c_client->dev,
+ "%s: No need to do reflash.\n",
+ __func__);
+ goto exit;
+ case UI_FIRMWARE:
+ retval = fwu_do_reflash();
+ break;
+ case CONFIG_AREA:
+ retval = fwu_do_write_config();
+ break;
+ default:
+ dev_err(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Unknown flash area\n",
+ __func__);
+ goto exit;
+ }
+
+ if (retval < 0) {
+ dev_err(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Failed to do reflash\n",
+ __func__);
+ }
+
+ /* reset device */
+ fwu_reset_device();
+
+ /* check device status */
+ retval = fwu_read_f01_device_status(&f01_device_status);
+ if (retval < 0)
+ goto exit;
+
+ dev_info(&fwu->rmi4_data->i2c_client->dev, "Device is in %s mode\n",
+ f01_device_status.flash_prog == 1 ? "bootloader" : "UI");
+ if (f01_device_status.flash_prog)
+ dev_info(&fwu->rmi4_data->i2c_client->dev, "Flash status %d\n",
+ f01_device_status.status_code);
+
+ if (f01_device_status.flash_prog) {
+ dev_info(&fwu->rmi4_data->i2c_client->dev,
+ "%s: Device is in flash prog mode 0x%02X\n",
+ __func__, f01_device_status.status_code);
+ retval = 0;
+ goto exit;
+ }
+
+ if (fw_entry)
+ release_firmware(fw_entry);
+
+ pr_notice("%s: End of reflash process\n", __func__);
+exit:
+ return retval;
+}
+
int synaptics_fw_updater(unsigned char *fw_data)
{
int retval;
@@ -1351,7 +1455,7 @@
int retval;
unsigned long config_area;
- retval = sstrtoul(buf, 10, &config_area);
+ retval = kstrtoul(buf, 10, &config_area);
if (retval)
return retval;
@@ -1367,7 +1471,7 @@
unsigned long size;
struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data;
- retval = sstrtoul(buf, 10, &size);
+ retval = kstrtoul(buf, 10, &size);
if (retval)
return retval;
@@ -1422,6 +1526,20 @@
return snprintf(buf, PAGE_SIZE, "%u\n", fwu->disp_config_block_count);
}
+static ssize_t fwu_sysfs_config_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned char config_id[8];
+ /* device config id */
+ fwu->fn_ptr->read(fwu->rmi4_data,
+ fwu->f34_fd.ctrl_base_addr,
+ config_id,
+ sizeof(config_id));
+
+ return snprintf(buf, PAGE_SIZE, "%d.%d.%d.%d\n",
+ config_id[0], config_id[1], config_id[2], config_id[3]);
+}
+
static void synaptics_rmi4_fwu_attn(struct synaptics_rmi4_data *rmi4_data,
unsigned char intr_mask)
{
@@ -1431,6 +1549,11 @@
return;
}
+static void synaptics_rmi4_fwu_work(struct work_struct *work)
+{
+ fwu_start_reflash();
+}
+
static int synaptics_rmi4_fwu_init(struct synaptics_rmi4_data *rmi4_data)
{
int retval;
@@ -1497,6 +1620,7 @@
goto exit_free_mem;
fwu->initialized = true;
+ fwu->force_update = FORCE_UPDATE;
retval = sysfs_create_bin_file(&rmi4_data->input_dev->dev.kobj,
&dev_attr_data);
@@ -1519,6 +1643,13 @@
}
}
+#ifdef INSIDE_FIRMWARE_UPDATE
+ fwu->fwu_workqueue = create_singlethread_workqueue("fwu_workqueue");
+ INIT_DELAYED_WORK(&fwu->fwu_work, synaptics_rmi4_fwu_work);
+ queue_delayed_work(fwu->fwu_workqueue,
+ &fwu->fwu_work,
+ msecs_to_jiffies(1000));
+#endif
return 0;
exit_remove_attrs:
@@ -1584,4 +1715,4 @@
MODULE_AUTHOR("Synaptics, Inc.");
MODULE_DESCRIPTION("RMI4 FW Update Module");
MODULE_LICENSE("GPL");
-MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION);
+MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION_STRING);
diff --git a/kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.c b/drivers/input/touchscreen/synaptics_i2c_rmi4.c
similarity index 93%
rename from kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.c
rename to drivers/input/touchscreen/synaptics_i2c_rmi4.c
index 8553022..c68f730 100644
--- a/kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.c
+++ b/drivers/input/touchscreen/synaptics_i2c_rmi4.c
@@ -347,28 +347,32 @@
if (rmi4_data->button_0d_enabled == input)
return count;
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->fn_number == SYNAPTICS_RMI4_F1A) {
- ii = fhandler->intr_reg_num;
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->fn_number == SYNAPTICS_RMI4_F1A) {
+ ii = fhandler->intr_reg_num;
- retval = synaptics_rmi4_i2c_read(rmi4_data,
- rmi4_data->f01_ctrl_base_addr + 1 + ii,
- &intr_enable,
- sizeof(intr_enable));
- if (retval < 0)
- return retval;
+ retval = synaptics_rmi4_i2c_read(rmi4_data,
+ rmi4_data->f01_ctrl_base_addr +
+ 1 + ii,
+ &intr_enable,
+ sizeof(intr_enable));
+ if (retval < 0)
+ return retval;
- if (input == 1)
- intr_enable |= fhandler->intr_mask;
- else
- intr_enable &= ~fhandler->intr_mask;
+ if (input == 1)
+ intr_enable |= fhandler->intr_mask;
+ else
+ intr_enable &= ~fhandler->intr_mask;
- retval = synaptics_rmi4_i2c_write(rmi4_data,
- rmi4_data->f01_ctrl_base_addr + 1 + ii,
- &intr_enable,
- sizeof(intr_enable));
- if (retval < 0)
- return retval;
+ retval = synaptics_rmi4_i2c_write(rmi4_data,
+ rmi4_data->f01_ctrl_base_addr +
+ 1 + ii,
+ &intr_enable,
+ sizeof(intr_enable));
+ if (retval < 0)
+ return retval;
+ }
}
}
@@ -637,28 +641,22 @@
finger_status,
x, y, wx, wy);
-#ifdef TYPE_B_PROTOCOL
- input_report_abs(rmi4_data->input_dev,
- ABS_MT_POSITION_X, x);
- input_report_abs(rmi4_data->input_dev,
- ABS_MT_POSITION_Y, y);
-#ifdef REPORT_2D_W
- input_report_abs(rmi4_data->input_dev,
- ABS_MT_TOUCH_MAJOR, max(wx, wy));
- input_report_abs(rmi4_data->input_dev,
- ABS_MT_TOUCH_MINOR, min(wx, wy));
-#endif
-#else
+ input_report_key(rmi4_data->input_dev,
+ BTN_TOUCH, 1);
+ input_report_key(rmi4_data->input_dev,
+ BTN_TOOL_FINGER, 1);
input_report_abs(rmi4_data->input_dev,
ABS_MT_POSITION_X, x);
input_report_abs(rmi4_data->input_dev,
ABS_MT_POSITION_Y, y);
+
#ifdef REPORT_2D_W
input_report_abs(rmi4_data->input_dev,
ABS_MT_TOUCH_MAJOR, max(wx, wy));
input_report_abs(rmi4_data->input_dev,
ABS_MT_TOUCH_MINOR, min(wx, wy));
#endif
+#ifndef TYPE_B_PROTOCOL
input_mt_sync(rmi4_data->input_dev);
#endif
touch_count++;
@@ -853,12 +851,14 @@
* Traverse the function handler list and service the source(s)
* of the interrupt accordingly.
*/
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->num_of_data_sources) {
- if (fhandler->intr_mask &
- intr[fhandler->intr_reg_num]) {
- synaptics_rmi4_report_touch(rmi4_data,
- fhandler, &touch_count);
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->num_of_data_sources) {
+ if (fhandler->intr_mask &
+ intr[fhandler->intr_reg_num]) {
+ synaptics_rmi4_report_touch(rmi4_data,
+ fhandler, &touch_count);
+ }
}
}
}
@@ -1088,8 +1088,8 @@
if (!pdata->capacitance_button_map) {
dev_err(&rmi4_data->i2c_client->dev,
- "%s: capacitance_button_map is \
- NULL in board file\n",
+ "%s: capacitance_button_map is" \
+ "NULL in board file\n",
__func__);
return -ENODEV;
} else if (!pdata->capacitance_button_map->map) {
@@ -1194,6 +1194,63 @@
return 0;
}
+
+ /**
+ * synaptics_rmi4_query_device_info()
+ *
+ * Called by synaptics_rmi4_query_device().
+ *
+ */
+static int synaptics_rmi4_query_device_info(
+ struct synaptics_rmi4_data *rmi4_data)
+{
+ int retval;
+ unsigned char f01_query[F01_STD_QUERY_LEN];
+ struct synaptics_rmi4_device_info *rmi = &(rmi4_data->rmi4_mod_info);
+
+ retval = synaptics_rmi4_i2c_read(rmi4_data,
+ rmi4_data->f01_query_base_addr,
+ f01_query,
+ sizeof(f01_query));
+ if (retval < 0)
+ return retval;
+
+ /* RMI Version 4.0 currently supported */
+ rmi->version_major = 4;
+ rmi->version_minor = 0;
+
+ rmi->manufacturer_id = f01_query[0];
+ rmi->product_props = f01_query[1];
+ rmi->product_info[0] = f01_query[2] & MASK_7BIT;
+ rmi->product_info[1] = f01_query[3] & MASK_7BIT;
+ rmi->date_code[0] = f01_query[4] & MASK_5BIT;
+ rmi->date_code[1] = f01_query[5] & MASK_4BIT;
+ rmi->date_code[2] = f01_query[6] & MASK_5BIT;
+ rmi->tester_id = ((f01_query[7] & MASK_7BIT) << 8) |
+ (f01_query[8] & MASK_7BIT);
+ rmi->serial_number = ((f01_query[9] & MASK_7BIT) << 8) |
+ (f01_query[10] & MASK_7BIT);
+ memcpy(rmi->product_id_string, &f01_query[11], 10);
+
+ if (rmi->manufacturer_id != 1) {
+ dev_err(&rmi4_data->i2c_client->dev,
+ "%s: Non-Synaptics device found, manufacturer ID = %d\n",
+ __func__, rmi->manufacturer_id);
+ }
+
+ retval = synaptics_rmi4_i2c_read(rmi4_data,
+ rmi4_data->f01_query_base_addr + F01_BUID_ID_OFFSET,
+ rmi->build_id,
+ sizeof(rmi->build_id));
+ if (retval < 0) {
+ dev_err(&rmi4_data->i2c_client->dev,
+ "%s: Failed to read firmware build id (code %d)\n",
+ __func__, retval);
+ return retval;
+ }
+ return retval;
+}
+
/**
* synaptics_rmi4_query_device()
*
@@ -1214,7 +1271,6 @@
unsigned char page_number;
unsigned char intr_count = 0;
unsigned char data_sources = 0;
- unsigned char f01_query[F01_STD_QUERY_LEN];
unsigned short pdt_entry_addr;
unsigned short intr_addr;
struct synaptics_rmi4_f01_device_status status;
@@ -1264,6 +1320,11 @@
rmi4_data->f01_cmd_base_addr =
rmi_fd.cmd_base_addr;
+ retval =
+ synaptics_rmi4_query_device_info(rmi4_data);
+ if (retval < 0)
+ return retval;
+
retval = synaptics_rmi4_i2c_read(rmi4_data,
rmi4_data->f01_data_base_addr,
status.data,
@@ -1277,7 +1338,17 @@
status.status_code);
goto flash_prog_mode;
}
- break;
+ break;
+
+ case SYNAPTICS_RMI4_F34:
+ retval = synaptics_rmi4_i2c_read(rmi4_data,
+ rmi_fd.ctrl_base_addr,
+ rmi->config_id,
+ sizeof(rmi->config_id));
+ if (retval < 0)
+ return retval;
+ break;
+
case SYNAPTICS_RMI4_F11:
if (rmi_fd.intr_src_count == 0)
break;
@@ -1335,56 +1406,24 @@
"%s: Number of interrupt registers = %d\n",
__func__, rmi4_data->num_of_intr_regs);
- retval = synaptics_rmi4_i2c_read(rmi4_data,
- rmi4_data->f01_query_base_addr,
- f01_query,
- sizeof(f01_query));
- if (retval < 0)
- return retval;
-
- /* RMI Version 4.0 currently supported */
- rmi->version_major = 4;
- rmi->version_minor = 0;
-
- rmi->manufacturer_id = f01_query[0];
- rmi->product_props = f01_query[1];
- rmi->product_info[0] = f01_query[2] & MASK_7BIT;
- rmi->product_info[1] = f01_query[3] & MASK_7BIT;
- rmi->date_code[0] = f01_query[4] & MASK_5BIT;
- rmi->date_code[1] = f01_query[5] & MASK_4BIT;
- rmi->date_code[2] = f01_query[6] & MASK_5BIT;
- rmi->tester_id = ((f01_query[7] & MASK_7BIT) << 8) |
- (f01_query[8] & MASK_7BIT);
- rmi->serial_number = ((f01_query[9] & MASK_7BIT) << 8) |
- (f01_query[10] & MASK_7BIT);
- memcpy(rmi->product_id_string, &f01_query[11], 10);
-
- if (rmi->manufacturer_id != 1) {
- dev_err(&rmi4_data->i2c_client->dev,
- "%s: Non-Synaptics device found, manufacturer ID = %d\n",
- __func__, rmi->manufacturer_id);
- }
-
- retval = synaptics_rmi4_i2c_read(rmi4_data,
- rmi4_data->f01_query_base_addr + F01_BUID_ID_OFFSET,
- rmi->build_id,
- sizeof(rmi->build_id));
- if (retval < 0)
- return retval;
-
memset(rmi4_data->intr_mask, 0x00, sizeof(rmi4_data->intr_mask));
/*
* Map out the interrupt bit masks for the interrupt sources
* from the registered function handlers.
*/
- list_for_each_entry(fhandler, &rmi->support_fn_list, link)
- data_sources += fhandler->num_of_data_sources;
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link)
+ data_sources += fhandler->num_of_data_sources;
+ }
if (data_sources) {
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->num_of_data_sources) {
- rmi4_data->intr_mask[fhandler->intr_reg_num] |=
- fhandler->intr_mask;
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler,
+ &rmi->support_fn_list, link) {
+ if (fhandler->num_of_data_sources) {
+ rmi4_data->intr_mask[fhandler->intr_reg_num] |=
+ fhandler->intr_mask;
+ }
}
}
}
@@ -1430,12 +1469,14 @@
msleep(100);
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
- synaptics_rmi4_f1a_kfree(fhandler);
- else
- kfree(fhandler->data);
- kfree(fhandler);
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
+ synaptics_rmi4_f1a_kfree(fhandler);
+ else
+ kfree(fhandler->data);
+ kfree(fhandler);
+ }
}
retval = synaptics_rmi4_query_device(rmi4_data);
@@ -1534,12 +1575,14 @@
exp_fhandler->inserted = false;
list_add_tail(&exp_fhandler->link, &exp_fn_list);
} else {
- list_for_each_entry(exp_fhandler, &exp_fn_list, link) {
- if (exp_fhandler->func_init == func_init) {
- exp_fhandler->inserted = false;
- exp_fhandler->func_init = NULL;
- exp_fhandler->func_attn = NULL;
- goto exit;
+ if (!list_empty(&exp_fn_list)) {
+ list_for_each_entry(exp_fhandler, &exp_fn_list, link) {
+ if (exp_fhandler->func_init == func_init) {
+ exp_fhandler->inserted = false;
+ exp_fhandler->func_init = NULL;
+ exp_fhandler->func_attn = NULL;
+ goto exit;
+ }
}
}
}
@@ -1611,7 +1654,7 @@
retval = -ENOMEM;
goto err_input_device;
}
-/*
+
if (platform_data->regulator_en) {
rmi4_data->regulator = regulator_get(&client->dev, "vdd");
if (IS_ERR(rmi4_data->regulator)) {
@@ -1623,7 +1666,7 @@
}
regulator_enable(rmi4_data->regulator);
}
-*/
+
rmi4_data->i2c_client = client;
rmi4_data->current_page = MASK_8BIT;
rmi4_data->board = platform_data;
@@ -1652,12 +1695,16 @@
rmi4_data->input_dev->name = DRIVER_NAME;
rmi4_data->input_dev->phys = INPUT_PHYS_NAME;
rmi4_data->input_dev->id.bustype = BUS_I2C;
+ rmi4_data->input_dev->id.product = SYNAPTICS_RMI4_DRIVER_PRODUCT;
+ rmi4_data->input_dev->id.version = SYNAPTICS_RMI4_DRIVER_VERSION;
rmi4_data->input_dev->dev.parent = &client->dev;
input_set_drvdata(rmi4_data->input_dev, rmi4_data);
set_bit(EV_SYN, rmi4_data->input_dev->evbit);
set_bit(EV_KEY, rmi4_data->input_dev->evbit);
set_bit(EV_ABS, rmi4_data->input_dev->evbit);
+ set_bit(BTN_TOUCH, rmi4_data->input_dev->keybit);
+ set_bit(BTN_TOOL_FINGER, rmi4_data->input_dev->keybit);
#ifdef INPUT_PROP_DIRECT
set_bit(INPUT_PROP_DIRECT, rmi4_data->input_dev->propbit);
@@ -1681,9 +1728,11 @@
#endif
f1a = NULL;
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
- f1a = fhandler->data;
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
+ f1a = fhandler->data;
+ }
}
if (f1a) {
@@ -1724,17 +1773,6 @@
&rmi4_data->det_work,
msecs_to_jiffies(EXP_FN_DET_INTERVAL));
- if (platform_data->gpio_config) {
- retval = platform_data->gpio_config(platform_data->irq_gpio,
- true);
- if (retval < 0) {
- dev_err(&client->dev,
- "%s: Failed to configure GPIO\n",
- __func__);
- goto err_gpio;
- }
- }
-
rmi4_data->irq = gpio_to_irq(platform_data->irq_gpio);
retval = synaptics_rmi4_irq_enable(rmi4_data, true);
@@ -1765,7 +1803,6 @@
}
err_enable_irq:
-err_gpio:
input_unregister_device(rmi4_data->input_dev);
err_register_input:
@@ -1775,16 +1812,17 @@
regulator_put(rmi4_data->regulator);
}
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
- synaptics_rmi4_f1a_kfree(fhandler);
- else
- kfree(fhandler->data);
- kfree(fhandler);
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
+ synaptics_rmi4_f1a_kfree(fhandler);
+ else
+ kfree(fhandler->data);
+ kfree(fhandler);
+ }
}
-/*
+
err_regulator:
-*/
input_free_device(rmi4_data->input_dev);
rmi4_data->input_dev = NULL;
@@ -1836,12 +1874,14 @@
regulator_put(rmi4_data->regulator);
}
- list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
- if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
- synaptics_rmi4_f1a_kfree(fhandler);
- else
- kfree(fhandler->data);
- kfree(fhandler);
+ if (!list_empty(&rmi->support_fn_list)) {
+ list_for_each_entry(fhandler, &rmi->support_fn_list, link) {
+ if (fhandler->fn_number == SYNAPTICS_RMI4_F1A)
+ synaptics_rmi4_f1a_kfree(fhandler);
+ else
+ kfree(fhandler->data);
+ kfree(fhandler);
+ }
}
input_free_device(rmi4_data->input_dev);
@@ -2107,4 +2147,4 @@
MODULE_AUTHOR("Synaptics, Inc.");
MODULE_DESCRIPTION("Synaptics RMI4 I2C Touch Driver");
MODULE_LICENSE("GPL v2");
-MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION);
+MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION_STRING);
diff --git a/kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.h b/drivers/input/touchscreen/synaptics_i2c_rmi4.h
similarity index 95%
rename from kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.h
rename to drivers/input/touchscreen/synaptics_i2c_rmi4.h
index 7ee0a92..eb8d5f2 100644
--- a/kernel/drivers/input/touchscreen/synaptics_i2c_rmi4.h
+++ b/drivers/input/touchscreen/synaptics_i2c_rmi4.h
@@ -20,27 +20,17 @@
#ifndef _SYNAPTICS_DSX_RMI4_H_
#define _SYNAPTICS_DSX_RMI4_H_
-#define SYNAPTICS_RMI4_DRIVER_VERSION "DSX 1.0"
+#define SYNAPTICS_RMI4_DS4 0x0001
+#define SYNAPTICS_RMI4_DS5 0x0002
+#define SYNAPTICS_RMI4_DRIVER_PRODUCT SYNAPTICS_RMI4_DS4
+#define SYNAPTICS_RMI4_DRIVER_VERSION 0x1001
+#define SYNAPTICS_RMI4_DRIVER_VERSION_STRING "0x1001"
#include <linux/version.h>
#ifdef CONFIG_HAS_EARLYSUSPEND
#include <linux/earlysuspend.h>
#endif
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 38))
-#define KERNEL_ABOVE_2_6_38
-#endif
-
-#ifdef KERNEL_ABOVE_2_6_38
-#define sstrtoul(...) kstrtoul(__VA_ARGS__)
-#else
-#define sstrtoul(...) strict_strtoul(__VA_ARGS__)
-#endif
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(3, 7, 0))
-#define KERNEL_ABOVE_3_7
-#endif
-
#define PDT_PROPS (0x00EF)
#define PDT_START (0x00E9)
#define PDT_END (0x000A)
@@ -158,6 +148,7 @@
unsigned short serial_number;
unsigned char product_id_string[SYNAPTICS_RMI4_PRODUCT_ID_SIZE + 1];
unsigned char build_id[SYNAPTICS_RMI4_BUILD_ID_SIZE];
+ unsigned char config_id[3];
struct list_head support_fn_list;
};
diff --git a/kernel/drivers/input/touchscreen/synaptics_rmi_dev.c b/drivers/input/touchscreen/synaptics_rmi_dev.c
similarity index 99%
rename from kernel/drivers/input/touchscreen/synaptics_rmi_dev.c
rename to drivers/input/touchscreen/synaptics_rmi_dev.c
index 7585780..fbb6f5e 100644
--- a/kernel/drivers/input/touchscreen/synaptics_rmi_dev.c
+++ b/drivers/input/touchscreen/synaptics_rmi_dev.c
@@ -707,4 +707,4 @@
MODULE_AUTHOR("Synaptics, Inc.");
MODULE_DESCRIPTION("RMI4 RMI_Dev Module");
MODULE_LICENSE("GPL");
-MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION);
+MODULE_VERSION(SYNAPTICS_RMI4_DRIVER_VERSION_STRING);
diff --git a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
index b8c507e..8ce8dbf 100644
--- a/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
+++ b/drivers/media/platform/msm/camera_v2/isp/msm_buf_mgr.c
@@ -320,7 +320,8 @@
if (BUF_SRC(bufq->stream_id))
list_add_tail(&buf_info->list, &bufq->head);
else
- buf_mgr->vb2_ops->put_buf(buf_info->vb2_buf);
+ buf_mgr->vb2_ops->put_buf(buf_info->vb2_buf,
+ bufq->session_id, bufq->stream_id);
buf_info->state = MSM_ISP_BUFFER_STATE_QUEUED;
rc = 0;
break;
@@ -366,7 +367,8 @@
} else {
buf_info->vb2_buf->v4l2_buf.timestamp = *tv;
buf_info->vb2_buf->v4l2_buf.sequence = frame_id;
- buf_mgr->vb2_ops->buf_done(buf_info->vb2_buf);
+ buf_mgr->vb2_ops->buf_done(buf_info->vb2_buf,
+ bufq->session_id, bufq->stream_id);
}
}
diff --git a/drivers/media/platform/msm/camera_v2/msm.c b/drivers/media/platform/msm/camera_v2/msm.c
index c908333..08a4566 100644
--- a/drivers/media/platform/msm/camera_v2/msm.c
+++ b/drivers/media/platform/msm/camera_v2/msm.c
@@ -66,17 +66,6 @@
int stream_id;
};
-struct msm_stream {
- struct list_head list;
-
- /* stream index per session, same
- * as stream_id but set through s_parm */
- unsigned int stream_id;
-
- /* vb2 buffer handling */
- struct vb2_queue *vb2_q;
-};
-
struct msm_v4l2_subdev {
/* FIXME: for session close and error handling such
* as daemon shutdown */
@@ -275,7 +264,7 @@
stream->stream_id = stream_id;
stream->vb2_q = q;
-
+ spin_lock_init(&stream->stream_lock);
msm_enqueue(&session->stream_q, &stream->list);
session->stream_q.len++;
diff --git a/drivers/media/platform/msm/camera_v2/msm_buf_mgr/msm_generic_buf_mgr.c b/drivers/media/platform/msm/camera_v2/msm_buf_mgr/msm_generic_buf_mgr.c
index 762203c..a47d178 100644
--- a/drivers/media/platform/msm/camera_v2/msm_buf_mgr/msm_generic_buf_mgr.c
+++ b/drivers/media/platform/msm/camera_v2/msm_buf_mgr/msm_generic_buf_mgr.c
@@ -47,7 +47,9 @@
if (bufs->vb2_buf->v4l2_buf.index == buf_info->index) {
bufs->vb2_buf->v4l2_buf.sequence = buf_info->frame_id;
ret = buf_mngr_dev->vb2_ops.buf_done
- (bufs->vb2_buf);
+ (bufs->vb2_buf,
+ buf_info->session_id,
+ buf_info->stream_id);
list_del_init(&bufs->entry);
kfree(bufs);
break;
@@ -65,7 +67,8 @@
list_for_each_entry_safe(bufs, save, &buf_mngr_dev->buf_qhead, entry) {
if (bufs->vb2_buf->v4l2_buf.index == buf_info->index) {
- ret = buf_mngr_dev->vb2_ops.put_buf(bufs->vb2_buf);
+ ret = buf_mngr_dev->vb2_ops.put_buf(bufs->vb2_buf,
+ buf_info->session_id, buf_info->stream_id);
list_del_init(&bufs->entry);
kfree(bufs);
break;
diff --git a/drivers/media/platform/msm/camera_v2/msm_sd.h b/drivers/media/platform/msm/camera_v2/msm_sd.h
index aaf3548..958e030 100644
--- a/drivers/media/platform/msm/camera_v2/msm_sd.h
+++ b/drivers/media/platform/msm/camera_v2/msm_sd.h
@@ -65,8 +65,10 @@
struct vb2_buffer *(*get_buf)(int session_id, unsigned int stream_id);
struct vb2_queue *(*get_vb2_queue)(int session_id,
unsigned int stream_id);
- int (*put_buf)(struct vb2_buffer *vb2_buf);
- int (*buf_done)(struct vb2_buffer *vb2_buf);
+ int (*put_buf)(struct vb2_buffer *vb2_buf, int session_id,
+ unsigned int stream_id);
+ int (*buf_done)(struct vb2_buffer *vb2_buf, int session_id,
+ unsigned int stream_id);
};
#define MSM_SD_NOTIFY_GET_SD 0x00000001
diff --git a/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.c b/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.c
index 8a572a6..6ea86ae 100644
--- a/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.c
+++ b/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.c
@@ -12,8 +12,6 @@
#include "msm_vb2.h"
-static spinlock_t vb2_buf_lock;
-
static int msm_vb2_queue_setup(struct vb2_queue *q,
const struct v4l2_format *fmt,
unsigned int *num_buffers, unsigned int *num_planes,
@@ -44,7 +42,6 @@
msm_vb2_buf = container_of(vb, struct msm_vb2_buffer, vb2_buf);
msm_vb2_buf->in_freeq = 0;
- spin_lock_init(&vb2_buf_lock);
return 0;
}
@@ -102,22 +99,23 @@
static struct vb2_buffer *msm_vb2_get_buf(int session_id,
unsigned int stream_id)
{
- struct vb2_queue *q;
+ struct msm_stream *stream;
struct vb2_buffer *vb2_buf = NULL;
struct msm_vb2_buffer *msm_vb2;
unsigned long flags;
- spin_lock_irqsave(&vb2_buf_lock, flags);
+ stream = msm_get_stream(session_id, stream_id);
+ if (!stream)
+ return NULL;
- q = msm_get_stream_vb2q(session_id, stream_id);
+ spin_lock_irqsave(&stream->stream_lock, flags);
- /*FIXME: need a check if stream on issue*/
- if (!q) {
+ if (!stream->vb2_q) {
pr_err("%s: stream q not available\n", __func__);
goto end;
}
- list_for_each_entry(vb2_buf, &(q->queued_list),
+ list_for_each_entry(vb2_buf, &(stream->vb2_q->queued_list),
queued_entry) {
if (vb2_buf->state != VB2_BUF_STATE_ACTIVE)
continue;
@@ -131,11 +129,12 @@
}
vb2_buf = NULL;
end:
- spin_unlock_irqrestore(&vb2_buf_lock, flags);
+ spin_unlock_irqrestore(&stream->stream_lock, flags);
return vb2_buf;
}
-static int msm_vb2_put_buf(struct vb2_buffer *vb)
+static int msm_vb2_put_buf(struct vb2_buffer *vb, int session_id,
+ unsigned int stream_id)
{
struct msm_vb2_buffer *msm_vb2;
int rc = 0;
@@ -155,13 +154,18 @@
return rc;
}
-static int msm_vb2_buf_done(struct vb2_buffer *vb)
+static int msm_vb2_buf_done(struct vb2_buffer *vb, int session_id,
+ unsigned int stream_id)
{
unsigned long flags;
struct msm_vb2_buffer *msm_vb2;
+ struct msm_stream *stream;
int rc = 0;
- spin_lock_irqsave(&vb2_buf_lock, flags);
+ stream = msm_get_stream(session_id, stream_id);
+ if (!stream)
+ return 0;
+ spin_lock_irqsave(&stream->stream_lock, flags);
if (vb) {
msm_vb2 =
container_of(vb, struct msm_vb2_buffer, vb2_buf);
@@ -176,7 +180,7 @@
rc = -EINVAL;
}
- spin_unlock_irqrestore(&vb2_buf_lock, flags);
+ spin_unlock_irqrestore(&stream->stream_lock, flags);
return rc;
}
diff --git a/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.h b/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.h
index 148d577..cecc85e 100644
--- a/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.h
+++ b/drivers/media/platform/msm/camera_v2/msm_vb2/msm_vb2.h
@@ -51,6 +51,17 @@
void *alloc_ctx;
};
+struct msm_stream {
+ struct list_head list;
+
+ /* stream index per session, same
+ * as stream_id but set through s_parm */
+ unsigned int stream_id;
+ /* vb2 buffer handling */
+ struct vb2_queue *vb2_q;
+ spinlock_t stream_lock;
+};
+
struct vb2_ops *msm_vb2_get_q_ops(void);
struct vb2_mem_ops *msm_vb2_get_q_mem_ops(void);
int msm_vb2_request_cb(struct msm_sd_req_vb2_q *req_sd);
diff --git a/drivers/net/wireless/wcnss/wcnss_vreg.c b/drivers/net/wireless/wcnss/wcnss_vreg.c
index 75c75a8..025410a 100644
--- a/drivers/net/wireless/wcnss/wcnss_vreg.c
+++ b/drivers/net/wireless/wcnss/wcnss_vreg.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -40,6 +40,10 @@
#define RIVA_PMU_OFFSET 0x28
#define PRONTO_PMU_OFFSET 0x1004
+#define RIVA_SPARE_OFFSET 0x0b4
+#define PRONTO_SPARE_OFFSET 0x1088
+#define NVBIN_DLND_BIT BIT(25)
+
#define WCNSS_PMU_CFG_IRIS_XO_CFG BIT(3)
#define WCNSS_PMU_CFG_IRIS_XO_EN BIT(4)
#define WCNSS_PMU_CFG_GC_BUS_MUX_SEL_TOP BIT(5)
@@ -115,13 +119,16 @@
int rc = 0;
int size = 0;
int pmu_offset = 0;
+ int spare_offset = 0;
unsigned long wcnss_phys_addr;
void __iomem *pmu_conf_reg;
+ void __iomem *spare_reg;
struct clk *clk;
if (wcnss_hardware_type() == WCNSS_PRONTO_HW) {
wcnss_phys_addr = MSM_PRONTO_PHYS;
pmu_offset = PRONTO_PMU_OFFSET;
+ spare_offset = PRONTO_SPARE_OFFSET;
size = 0x3000;
clk = clk_get(dev, "xo");
@@ -132,6 +139,7 @@
} else {
wcnss_phys_addr = MSM_RIVA_PHYS;
pmu_offset = RIVA_PMU_OFFSET;
+ spare_offset = RIVA_SPARE_OFFSET;
size = SZ_256;
clk = clk_get(dev, "cxo");
@@ -147,6 +155,13 @@
pr_err("ioremap wcnss physical failed\n");
goto fail;
}
+
+ pr_debug("wcnss: Indicate NV bin download\n");
+ spare_reg = msm_wcnss_base + spare_offset;
+ reg = readl_relaxed(spare_reg);
+ reg |= NVBIN_DLND_BIT;
+ writel_relaxed(reg, spare_reg);
+
pmu_conf_reg = msm_wcnss_base + pmu_offset;
/* Enable IRIS XO */
diff --git a/drivers/net/wireless/wcnss/wcnss_wlan.c b/drivers/net/wireless/wcnss/wcnss_wlan.c
index 55b4192..439b1f8 100644
--- a/drivers/net/wireless/wcnss/wcnss_wlan.c
+++ b/drivers/net/wireless/wcnss/wcnss_wlan.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -75,13 +76,16 @@
#define WCNSS_CTRL_MSG_START 0x01000000
#define WCNSS_VERSION_REQ (WCNSS_CTRL_MSG_START + 0)
#define WCNSS_VERSION_RSP (WCNSS_CTRL_MSG_START + 1)
+#define WCNSS_NVBIN_DNLD_REQ (WCNSS_CTRL_MSG_START + 2)
+#define WCNSS_NVBIN_DNLD_RSP (WCNSS_CTRL_MSG_START + 3)
+
#define VALID_VERSION(version) \
((strncmp(version, "INVALID", WCNSS_VERSION_LEN)) ? 1 : 0)
struct smd_msg_hdr {
- unsigned int type;
- unsigned int len;
+ unsigned int msg_type;
+ unsigned int msg_len;
};
struct wcnss_version {
@@ -92,6 +96,57 @@
unsigned char revision;
};
+#define NVBIN_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin"
+
+/*
+ * On SMD channel 4K of maximum data can be transferred, including message
+ * header, so NV fragment size as next multiple of 1Kb is 3Kb.
+ */
+#define NV_FRAGMENT_SIZE 3072
+
+/* Macro to find the total number fragments of the NV bin Image */
+#define TOTALFRAGMENTS(x) (((x % NV_FRAGMENT_SIZE) == 0) ? \
+ (x / NV_FRAGMENT_SIZE) : ((x / NV_FRAGMENT_SIZE) + 1))
+
+struct nvbin_dnld_req_params {
+ /*
+ * Fragment sequence number of the NV bin Image. NV Bin Image
+ * might not fit into one message due to size limitation of
+ * the SMD channel FIFO so entire NV blob is chopped into
+ * multiple fragments starting with seqeunce number 0. The
+ * last fragment is indicated by marking is_last_fragment field
+ * to 1. At receiving side, NV blobs would be concatenated
+ * together without any padding bytes in between.
+ */
+ unsigned short frag_number;
+
+ /*
+ * When set to 1 it indicates that no more fragments will
+ * be sent. Receiver shall send back response message after
+ * the last fragment.
+ */
+ unsigned short is_last_fragment;
+
+ /* NV Image size (number of bytes) */
+ unsigned int nvbin_buffer_size;
+
+ /*
+ * Following the 'nvbin_buffer_size', there should be
+ * nvbin_buffer_size bytes of NV bin Image i.e.
+ * uint8[nvbin_buffer_size].
+ */
+};
+
+struct nvbin_dnld_req_msg {
+ /*
+ * Note: The length specified in nvbin_dnld_req_msg messages
+ * should be hdr.msg_len = sizeof(nvbin_dnld_req_msg) +
+ * nvbin_buffer_size.
+ */
+ struct smd_msg_hdr hdr;
+ struct nvbin_dnld_req_params dnld_req_params;
+};
+
static struct {
struct platform_device *pdev;
void *pil;
@@ -111,6 +166,7 @@
struct wcnss_wlan_config wlan_config;
struct delayed_work wcnss_work;
struct work_struct wcnssctrl_version_work;
+ struct work_struct wcnssctrl_nvbin_dnld_work;
struct work_struct wcnssctrl_rx_work;
struct wake_lock wcnss_wake_lock;
void __iomem *msm_wcnss_base;
@@ -404,7 +460,7 @@
void wcnss_flush_delayed_boot_votes()
{
- flush_delayed_work_sync(&penv->wcnss_work);
+ flush_delayed_work(&penv->wcnss_work);
}
EXPORT_SYMBOL(wcnss_flush_delayed_boot_votes);
@@ -678,7 +734,7 @@
ret = smd_write_avail(penv->smd_ch);
if (ret < len) {
pr_err("wcnss: no space available for smd frame\n");
- ret = -ENOSPC;
+ return -ENOSPC;
}
ret = smd_write(penv->smd_ch, data, len);
if (ret < len) {
@@ -695,6 +751,7 @@
unsigned char buf[WCNSS_MAX_FRAME_SIZE];
struct smd_msg_hdr *phdr;
struct wcnss_version *pversion;
+ int hw_type;
len = smd_read_avail(penv->smd_ch);
if (len > WCNSS_MAX_FRAME_SIZE) {
@@ -713,7 +770,7 @@
phdr = (struct smd_msg_hdr *)buf;
- switch (phdr->type) {
+ switch (phdr->msg_type) {
case WCNSS_VERSION_RSP:
pversion = (struct wcnss_version *)buf;
@@ -726,10 +783,38 @@
"%02x%02x%02x%02x", pversion->major, pversion->minor,
pversion->version, pversion->revision);
pr_info("wcnss: version %s\n", penv->wcnss_version);
+ /* schedule work to download nvbin to ccpu */
+ hw_type = wcnss_hardware_type();
+ switch (hw_type) {
+ case WCNSS_RIVA_HW:
+ /* supported only if riva major >= 1 and minor >= 4 */
+ if ((pversion->major >= 1) && (pversion->minor >= 4)) {
+ pr_info("wcnss: schedule dnld work for riva\n");
+ schedule_work(&penv->wcnssctrl_nvbin_dnld_work);
+ }
+ break;
+
+ case WCNSS_PRONTO_HW:
+ /* supported only if pronto major >= 1 and minor >= 4 */
+ if ((pversion->major >= 1) && (pversion->minor >= 4)) {
+ pr_info("wcnss: schedule dnld work for pronto\n");
+ schedule_work(&penv->wcnssctrl_nvbin_dnld_work);
+ }
+ break;
+
+ default:
+ pr_info("wcnss: unknown hw type (%d), will not schedule dnld work\n",
+ hw_type);
+ break;
+ }
+ break;
+
+ case WCNSS_NVBIN_DNLD_RSP:
+ pr_info("wcnss: received WCNSS_NVBIN_DNLD_RSP from ccpu\n");
break;
default:
- pr_err("wcnss: invalid message type %d\n", phdr->type);
+ pr_err("wcnss: invalid message type %d\n", phdr->msg_type);
}
return;
}
@@ -739,15 +824,126 @@
struct smd_msg_hdr smd_msg;
int ret = 0;
- smd_msg.type = WCNSS_VERSION_REQ;
- smd_msg.len = sizeof(smd_msg);
- ret = wcnss_smd_tx(&smd_msg, smd_msg.len);
+ smd_msg.msg_type = WCNSS_VERSION_REQ;
+ smd_msg.msg_len = sizeof(smd_msg);
+ ret = wcnss_smd_tx(&smd_msg, smd_msg.msg_len);
if (ret < 0)
pr_err("wcnss: smd tx failed\n");
return;
}
+static void wcnss_nvbin_dnld_req(struct work_struct *worker)
+{
+ int ret = 0;
+ struct nvbin_dnld_req_msg *dnld_req_msg;
+ unsigned short total_fragments = 0;
+ unsigned short count = 0;
+ unsigned short retry_count = 0;
+ unsigned short cur_frag_size = 0;
+ unsigned char *outbuffer = NULL;
+ const void *nv_blob_addr = NULL;
+ unsigned int nv_blob_size = 0;
+ const struct firmware *nv = NULL;
+ struct device *dev = NULL;
+
+ dev = wcnss_wlan_get_device();
+
+ ret = request_firmware(&nv, NVBIN_FILE, dev);
+
+ if (ret || !nv || !nv->data || !nv->size) {
+ pr_err("wcnss: wcnss_nvbin_dnld_req: request_firmware failed for %s\n",
+ NVBIN_FILE);
+ return;
+ }
+
+ /*
+ * First 4 bytes in nv blob is validity bitmap.
+ * We cannot validate nv, so skip those 4 bytes.
+ */
+ nv_blob_addr = nv->data + 4;
+ nv_blob_size = nv->size - 4;
+
+ total_fragments = TOTALFRAGMENTS(nv_blob_size);
+
+ pr_info("wcnss: NV bin size: %d, total_fragments: %d\n",
+ nv_blob_size, total_fragments);
+
+ /* get buffer for nv bin dnld req message */
+ outbuffer = kmalloc((sizeof(struct nvbin_dnld_req_msg) +
+ NV_FRAGMENT_SIZE), GFP_KERNEL);
+
+ if (NULL == outbuffer) {
+ pr_err("wcnss: wcnss_nvbin_dnld_req: failed to get buffer\n");
+ goto err_free_nv;
+ }
+
+ dnld_req_msg = (struct nvbin_dnld_req_msg *)outbuffer;
+
+ dnld_req_msg->hdr.msg_type = WCNSS_NVBIN_DNLD_REQ;
+
+ for (count = 0; count < total_fragments; count++) {
+ dnld_req_msg->dnld_req_params.frag_number = count;
+
+ if (count == (total_fragments - 1)) {
+ /* last fragment, take care of boundry condition */
+ cur_frag_size = nv_blob_size % NV_FRAGMENT_SIZE;
+ if (!cur_frag_size)
+ cur_frag_size = NV_FRAGMENT_SIZE;
+
+ dnld_req_msg->dnld_req_params.is_last_fragment = 1;
+ } else {
+ cur_frag_size = NV_FRAGMENT_SIZE;
+ dnld_req_msg->dnld_req_params.is_last_fragment = 0;
+ }
+
+ dnld_req_msg->dnld_req_params.nvbin_buffer_size =
+ cur_frag_size;
+
+ dnld_req_msg->hdr.msg_len =
+ sizeof(struct nvbin_dnld_req_msg) + cur_frag_size;
+
+ /* copy NV fragment */
+ memcpy((outbuffer + sizeof(struct nvbin_dnld_req_msg)),
+ (nv_blob_addr + count * NV_FRAGMENT_SIZE),
+ cur_frag_size);
+
+ ret = wcnss_smd_tx(outbuffer, dnld_req_msg->hdr.msg_len);
+
+ retry_count = 0;
+ while ((ret == -ENOSPC) && (retry_count <= 3)) {
+ pr_debug("wcnss: wcnss_nvbin_dnld_req: smd tx failed, ENOSPC\n");
+ pr_debug("fragment: %d, len: %d, TotFragments: %d, retry_count: %d\n",
+ count, dnld_req_msg->hdr.msg_len,
+ total_fragments, retry_count);
+
+ /* wait and try again */
+ msleep(20);
+ retry_count++;
+ ret = wcnss_smd_tx(outbuffer,
+ dnld_req_msg->hdr.msg_len);
+ }
+
+ if (ret < 0) {
+ pr_err("wcnss: wcnss_nvbin_dnld_req: smd tx failed\n");
+ pr_err("fragment %d, len: %d, TotFragments: %d, retry_count: %d\n",
+ count, dnld_req_msg->hdr.msg_len,
+ total_fragments, retry_count);
+ goto err_dnld;
+ }
+ }
+
+err_dnld:
+ /* free buffer */
+ kfree(outbuffer);
+
+err_free_nv:
+ /* release firmware */
+ release_firmware(nv);
+
+ return;
+}
+
static int
wcnss_trigger_config(struct platform_device *pdev)
{
@@ -832,6 +1028,7 @@
}
INIT_WORK(&penv->wcnssctrl_rx_work, wcnssctrl_rx_handler);
INIT_WORK(&penv->wcnssctrl_version_work, wcnss_send_version_req);
+ INIT_WORK(&penv->wcnssctrl_nvbin_dnld_work, wcnss_nvbin_dnld_req);
wake_lock_init(&penv->wcnss_wake_lock, WAKE_LOCK_SUSPEND, "wcnss");
diff --git a/drivers/video/msm/mdss/mdss.h b/drivers/video/msm/mdss/mdss.h
index 5070b03..c69676f 100644
--- a/drivers/video/msm/mdss/mdss.h
+++ b/drivers/video/msm/mdss/mdss.h
@@ -63,7 +63,7 @@
struct regulator *fs;
struct workqueue_struct *clk_ctrl_wq;
- struct delayed_work clk_ctrl_worker;
+ struct work_struct clk_ctrl_worker;
struct platform_device *pdev;
char __iomem *mdp_base;
size_t mdp_reg_size;
@@ -80,6 +80,7 @@
u32 suspend;
u32 timeout;
+ atomic_t clk_ref;
u8 clk_ena;
u8 fs_ena;
u8 vsync_ena;
diff --git a/drivers/video/msm/mdss/mdss_mdp.c b/drivers/video/msm/mdss/mdss_mdp.c
index 31b80b1..ce5f707 100644
--- a/drivers/video/msm/mdss/mdss_mdp.c
+++ b/drivers/video/msm/mdss/mdss_mdp.c
@@ -514,15 +514,19 @@
return clk_rate;
}
-static void mdss_mdp_clk_ctrl_update(int enable)
+static void mdss_mdp_clk_ctrl_update(struct mdss_data_type *mdata)
{
- if (mdss_res->clk_ena == enable)
- return;
-
- pr_debug("MDP CLKS %s\n", (enable ? "Enable" : "Disable"));
+ int enable;
mutex_lock(&mdp_clk_lock);
- mdss_res->clk_ena = enable;
+ enable = atomic_read(&mdata->clk_ref) > 0;
+ if (mdata->clk_ena == enable) {
+ mutex_unlock(&mdp_clk_lock);
+ return;
+ }
+ mdata->clk_ena = enable;
+
+ pr_debug("MDP CLKS %s\n", (enable ? "Enable" : "Disable"));
mb();
mdss_mdp_clk_update(MDSS_CLK_AHB, enable);
@@ -530,7 +534,7 @@
mdss_mdp_clk_update(MDSS_CLK_MDP_CORE, enable);
mdss_mdp_clk_update(MDSS_CLK_MDP_LUT, enable);
- if (mdss_res->vsync_ena)
+ if (mdata->vsync_ena)
mdss_mdp_clk_update(MDSS_CLK_MDP_VSYNC, enable);
mutex_unlock(&mdp_clk_lock);
@@ -538,65 +542,37 @@
static void mdss_mdp_clk_ctrl_workqueue_handler(struct work_struct *work)
{
- mdss_mdp_clk_ctrl(MDP_BLOCK_MASTER_OFF, false);
+ struct mdss_data_type *mdata;
+
+ mdata = container_of(work, struct mdss_data_type, clk_ctrl_worker);
+ mdss_mdp_clk_ctrl_update(mdata);
}
void mdss_mdp_clk_ctrl(int enable, int isr)
{
- static atomic_t clk_ref = ATOMIC_INIT(0);
- static DEFINE_MUTEX(clk_ctrl_lock);
- int force_off = 0;
+ struct mdss_data_type *mdata = mdss_res;
- pr_debug("clk enable=%d isr=%d clk_ref=%d\n", enable, isr,
- atomic_read(&clk_ref));
- /*
- * It is assumed that if isr = TRUE then start = OFF
- * if start = ON when isr = TRUE it could happen that the usercontext
- * could turn off the clocks while the interrupt is updating the
- * power to ON
- */
- WARN_ON(isr == true && enable);
+ pr_debug("clk enable=%d isr=%d ref= %d\n", enable, isr,
+ atomic_read(&mdata->clk_ref));
if (enable == MDP_BLOCK_POWER_ON) {
- atomic_inc(&clk_ref);
- } else if (!atomic_add_unless(&clk_ref, -1, 0)) {
- if (enable == MDP_BLOCK_MASTER_OFF) {
- pr_debug("master power-off req\n");
- force_off = 1;
- } else {
- WARN(1, "too many mdp clock off call\n");
- }
- }
+ BUG_ON(isr);
- WARN_ON(enable == MDP_BLOCK_MASTER_OFF && !force_off);
-
- if (isr) {
- /* if it's power off send workqueue to turn off clocks */
- if (mdss_res->clk_ena && !atomic_read(&clk_ref))
- queue_delayed_work(mdss_res->clk_ctrl_wq,
- &mdss_res->clk_ctrl_worker,
- mdss_res->timeout);
+ if (atomic_inc_return(&mdata->clk_ref) == 1)
+ mdss_mdp_clk_ctrl_update(mdata);
} else {
- mutex_lock(&clk_ctrl_lock);
- if (delayed_work_pending(&mdss_res->clk_ctrl_worker))
- cancel_delayed_work(&mdss_res->clk_ctrl_worker);
+ BUG_ON(atomic_read(&mdata->clk_ref) == 0);
- if (atomic_read(&clk_ref)) {
- mdss_mdp_clk_ctrl_update(true);
- } else if (mdss_res->clk_ena) {
- mutex_lock(&mdp_suspend_mutex);
- if (force_off || mdss_res->suspend) {
- mdss_mdp_clk_ctrl_update(false);
- } else {
- /* send workqueue to turn off mdp power */
- queue_delayed_work(mdss_res->clk_ctrl_wq,
- &mdss_res->clk_ctrl_worker,
- mdss_res->timeout);
- }
- mutex_unlock(&mdp_suspend_mutex);
+ if (atomic_dec_and_test(&mdata->clk_ref)) {
+ if (isr)
+ queue_work(mdata->clk_ctrl_wq,
+ &mdata->clk_ctrl_worker);
+ else
+ mdss_mdp_clk_ctrl_update(mdata);
}
- mutex_unlock(&clk_ctrl_lock);
}
+
+
}
static inline int mdss_mdp_irq_clk_register(struct mdss_data_type *mdata,
@@ -817,8 +793,7 @@
return rc;
mdata->clk_ctrl_wq = create_singlethread_workqueue("mdp_clk_wq");
- INIT_DELAYED_WORK(&mdata->clk_ctrl_worker,
- mdss_mdp_clk_ctrl_workqueue_handler);
+ INIT_WORK(&mdata->clk_ctrl_worker, mdss_mdp_clk_ctrl_workqueue_handler);
mdata->smp_mb_cnt = MDSS_MDP_SMP_MMB_BLOCKS;
mdata->smp_mb_size = MDSS_MDP_SMP_MMB_SIZE;
@@ -1375,12 +1350,8 @@
return ret;
}
- cancel_delayed_work(&mdata->clk_ctrl_worker);
-
flush_workqueue(mdata->clk_ctrl_wq);
- mdss_mdp_clk_ctrl(MDP_BLOCK_MASTER_OFF, false);
-
mutex_lock(&mdp_suspend_mutex);
mdata->suspend = true;
mutex_unlock(&mdp_suspend_mutex);
diff --git a/drivers/video/msm/mdss/mdss_mdp.h b/drivers/video/msm/mdss/mdss_mdp.h
index 30b7695..455f725 100644
--- a/drivers/video/msm/mdss/mdss_mdp.h
+++ b/drivers/video/msm/mdss/mdss_mdp.h
@@ -66,7 +66,6 @@
#endif
enum mdss_mdp_block_power_state {
- MDP_BLOCK_MASTER_OFF = -1,
MDP_BLOCK_POWER_OFF = 0,
MDP_BLOCK_POWER_ON = 1,
};
diff --git a/kernel/include/linux/input/synaptics_dsx.h b/include/linux/input/synaptics_dsx.h
similarity index 100%
rename from kernel/include/linux/input/synaptics_dsx.h
rename to include/linux/input/synaptics_dsx.h
diff --git a/kernel/arch/arm/configs/omap3_beagle_android_defconfig b/kernel/arch/arm/configs/omap3_beagle_android_defconfig
deleted file mode 100644
index 4fc62c4fa..0000000
--- a/kernel/arch/arm/configs/omap3_beagle_android_defconfig
+++ /dev/null
@@ -1,2419 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux/arm 2.6.37 Kernel Configuration
-# Mon Apr 16 13:58:06 2012
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-# CONFIG_SPARSE_IRQ is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TINY_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_ASHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P64X0 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_S5PV310 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_TCC_926 is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-CONFIG_ARCH_OMAP=y
-# CONFIG_PLAT_SPEAR is not set
-
-#
-# TI OMAP Common Features
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_SMARTREFLEX=y
-CONFIG_OMAP_SMARTREFLEX_CLASS3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_IOMMU=y
-# CONFIG_OMAP_IOMMU_DEBUG is not set
-# CONFIG_OMAP_MPU_TIMER is not set
-CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# TI OMAP2/3/4 Specific Features
-#
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-# CONFIG_ARCH_OMAP2 is not set
-CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_TI81XX is not set
-CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP3_BEAGLE=y
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_FLASHBOARD is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_CRANEBOARD is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_IGEP0030 is not set
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-CONFIG_OMAP3_PM_DISABLE_VT_SWITCH=y
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-CONFIG_COMMON_CLKDEV=y
-# CONFIG_FIQ_DEBUGGER is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-# CONFIG_AUTO_ZRELADDR is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_INTERACTIVE is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_NVS=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_HAS_EARLYSUSPEND=y
-CONFIG_WAKELOCK=y
-CONFIG_WAKELOCK_STAT=y
-CONFIG_USER_WAKELOCK=y
-CONFIG_EARLYSUSPEND=y
-# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
-# CONFIG_CONSOLE_EARLYSUSPEND is not set
-CONFIG_FB_EARLYSUSPEND=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_HAS_OPP=y
-CONFIG_PM_OPP=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-CONFIG_NET_ACTIVITY_STATS=y
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-# CONFIG_CEPH_LIB is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_OMAP2=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
-CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-CONFIG_SMC911X=y
-CONFIG_SMSC911X=y
-# CONFIG_SMSC911X_ARCH_HOOKS is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DAVINCI_CPDMA=y
-# CONFIG_STMMAC_ETH is not set
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_BCM4329 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_WL12XX_PLATFORM_DATA=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_WAN is not set
-
-#
-# CAIF transport drivers
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_KEYRESET is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_QT602240 is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYCHORD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVMEM=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TI81XX_HDMI is not set
-# CONFIG_DCC_TTY is not set
-# CONFIG_RAMOOPS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_MUX is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_BASIC_MMIO is not set
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_VX855 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_SX150X is not set
-CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_74X164 is not set
-
-#
-# AC97 GPIO expanders:
-#
-
-#
-# MODULbus GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ20Z75 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_MFD_SUPPORT=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_SCRIPT=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_TWL6030_PWM is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_TC35892 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_TPS6586X is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_DUMMY=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_AD5398 is not set
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_IR_CORE is not set
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA827X=y
-CONFIG_MEDIA_TUNER_TDA18271=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9T001 is not set
-CONFIG_VIDEO_MT9V011=y
-# CONFIG_VIDEO_MT9V032 is not set
-CONFIG_VIDEO_MT9V113=y
-# CONFIG_VIDEO_MT9T111 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_AK881X is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VPSS_SYSTEM is not set
-# CONFIG_VIDEO_VPFE_CAPTURE is not set
-CONFIG_VIDEO_OMAP2_VOUT=y
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-CONFIG_VIDEO_OMAP3=y
-CONFIG_VIDEO_OMAP3_DEBUG=y
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-CONFIG_OMAP2_DSS_DPI=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO=y
-# CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1
-CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=1
-
-#
-# OMAP2/3 Display Device Drivers
-#
-CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_SAMSUNG_LMS700KF23 is not set
-# CONFIG_PANEL_TAAL is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LCD_PLATFORM=y
-# CONFIG_LCD_S6E63M0 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP8860 is not set
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SND_SOC_WL1271BT is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CANDO is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_ROCCAT_PYRA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
-
-#
-# Platform Glue Layer
-#
-# CONFIG_USB_MUSB_TUSB6010_GLUE is not set
-CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
-# CONFIG_USB_MUSB_AM35X_GLUE is not set
-# CONFIG_USB_MUSB_DAVINCI is not set
-# CONFIG_USB_MUSB_DA8XX is not set
-# CONFIG_USB_MUSB_TUSB6010 is not set
-CONFIG_USB_MUSB_OMAP2PLUS=y
-# CONFIG_USB_MUSB_AM35X is not set
-# CONFIG_USB_MUSB_TI81XX is not set
-# CONFIG_USB_MUSB_BLACKFIN is not set
-# CONFIG_USB_MUSB_UX500 is not set
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA_HW=y
-# CONFIG_USB_TI_CPPI_DMA_HW is not set
-# CONFIG_USB_TI_CPPI41_DMA_HW is not set
-CONFIG_USB_INVENTRA_DMA=y
-CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_TI_CPPI41_DMA is not set
-# CONFIG_USB_TUSB_OMAP_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_YUREX is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_ANDROID=y
-# CONFIG_USB_ANDROID_ACM is not set
-CONFIG_USB_ANDROID_ADB=y
-CONFIG_USB_ANDROID_MASS_STORAGE=y
-# CONFIG_USB_ANDROID_MTP is not set
-# CONFIG_USB_ANDROID_RNDIS is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_WEBCAM is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_EMBEDDED_SDIO is not set
-# CONFIG_MMC_PARANOID_SD_INIT is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
-CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_SWITCH=y
-# CONFIG_SWITCH_GPIO is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_ALARM=y
-CONFIG_RTC_INTF_ALARM_DEV=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_ECHO is not set
-# CONFIG_BRCM80211 is not set
-# CONFIG_RT2870 is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8712U is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
-# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-CONFIG_ANDROID_TIMED_GPIO=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-# CONFIG_POHMELFS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_IIO is not set
-# CONFIG_ZRAM is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_FB_SM7XX is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-# CONFIG_ADIS16255 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_EASYCAP is not set
-# CONFIG_TIDSPBRIDGE is not set
-# CONFIG_WESTBRIDGE is not set
-CONFIG_WESTBRIDGE_HAL_SELECTED=y
-CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL=y
-# CONFIG_MACH_NO_WESTBRIDGE is not set
-# CONFIG_ATH6K_LEGACY is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_FANOTIFY is not set
-CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_USE_LEGACY_DNS=y
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_BKL=y
-# CONFIG_SPARSE_RCU_POINTER is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LKDTM is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_KPROBE_EVENT=y
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_STRICT_DEVMEM is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_APPARMOR is not set
-# CONFIG_IMA is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
-# CONFIG_CRYPTO_DEV_OMAP_AES is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/kernel/arch/arm/configs/panda_defconfig b/kernel/arch/arm/configs/panda_defconfig
deleted file mode 100644
index 4c5e56c..0000000
--- a/kernel/arch/arm/configs/panda_defconfig
+++ /dev/null
@@ -1,331 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PANIC_TIMEOUT=5
-CONFIG_ASHMEM=y
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_MACH_OMAP_4430SDP is not set
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE="console=ttyO2,115200n8 mem=1G androidboot.console=ttyO2"
-CONFIG_CMDLINE_EXTEND=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_IDLE=y
-CONFIG_OMAP_SMARTREFLEX=y
-CONFIG_OMAP_SMARTREFLEX_CLASS1P5=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_WAKELOCK=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_LOG=y
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NF_CONNTRACK_H323=y
-CONFIG_NF_CONNTRACK_IRC=y
-CONFIG_NF_CONNTRACK_NETBIOS_NS=y
-CONFIG_NF_CONNTRACK_PPTP=y
-CONFIG_NF_CONNTRACK_SANE=y
-CONFIG_NF_CONNTRACK_TFTP=y
-CONFIG_NF_CT_NETLINK=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
-CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-CONFIG_NETFILTER_XT_MATCH_MAC=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_POLICY=y
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
-CONFIG_NETFILTER_XT_MATCH_STRING=y
-CONFIG_NETFILTER_XT_MATCH_TIME=y
-CONFIG_NETFILTER_XT_MATCH_U32=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_NF_CONNTRACK_IPV6=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_AH=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_TARGET_LOG=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-CONFIG_PHONET=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_U32=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_BT=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_WILINK=y
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_ONENAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
-# CONFIG_ANDROID_PMEM is not set
-CONFIG_KERNEL_DEBUGGER_CORE=y
-CONFIG_UID_STAT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_DEBUG=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_IFB=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_PPP=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYRESET=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_KEYCHORD=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_GPIO=y
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_TWL6030_PWM=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_PVR_SGX=y
-CONFIG_PVR_NEED_PVR_DPF=y
-CONFIG_PVR_NEED_PVR_ASSERT=y
-CONFIG_PVR_USSE_EDM_STATUS_DEBUG=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_NUM_FBS=2
-CONFIG_OMAP2_VRAM_SIZE=16
-CONFIG_PANEL_GENERIC_DPI=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_USB_MUSB_PERIPHERAL=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_G_ANDROID=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_EMBEDDED_SDIO=y
-CONFIG_MMC_PARANOID_SD_INIT=y
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_SWITCH=y
-CONFIG_SWITCH_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_STAGING=y
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
-CONFIG_ANDROID_TIMED_GPIO=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-# CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRC_CCITT=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_SDP4430=y
-CONFIG_SND_OMAP_SOC_OMAP4_HDMI=y
-CONFIG_OMAP_HSI=y
-CONFIG_OMAP_HSI_DEVICE=y
-CONFIG_CFG80211=y
-CONFIG_NL80211_TESTMODE=y
-CONFIG_LIB80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_MAC80211_DEBUGFS=y
-CONFIG_USB_ZD1201=y
-CONFIG_WL12XX_MENU=y
-CONFIG_WL12XX=y
-CONFIG_WL12XX_SDIO=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_OMAP_TEMP_SENSOR=y
-CONFIG_OMAP_DIE_TEMP_SENSOR=y
-CONFIG_TI_ST=y
-CONFIG_KEYBOARD_GPIO=y
diff --git a/kernel/arch/arm/mach-omap2/board-omap3beagle.c b/kernel/arch/arm/mach-omap2/board-omap3beagle.c
deleted file mode 100644
index b3d1b81..0000000
--- a/kernel/arch/arm/mach-omap2/board-omap3beagle.c
+++ /dev/null
@@ -1,1038 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3beagle.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-
-#include <linux/usb/android_composite.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <plat/board.h>
-#include <plat/common.h>
-#include <plat/display.h>
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "timer-gp.h"
-#include "board-flash.h"
-
-#ifdef CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4
-#include <linux/input/synaptics_dsx.h>
-
-#define TM_SAMPLE1 (1) // 2D only
-#define TM_SAMPLE2 (2) // 2D + 0D x 2
-#define TM_SAMPLE3 (3) // 2D + 0D x 4
-#define SYNAPTICS_MODULE TM_SAMPLE1
-#endif
-
-#define NAND_BLOCK_SIZE SZ_128K
-
-#ifdef CONFIG_USB_ANDROID
-#define GOOGLE_VENDOR_ID 0x18d1
-#define GOOGLE_PRODUCT_ID 0x9018
-#define GOOGLE_ADB_PRODUCT_ID 0x9015
-#endif
-
-/* Synaptics Thin Driver */
-#ifdef CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4
-static int synaptics_gpio_setup(unsigned gpio, bool configure)
-{
- int retval=0;
- if (configure)
- {
- retval = gpio_request(gpio, "rmi4_attn");
- if (retval) {
- pr_err("%s: Failed to get attn gpio %d. Code: %d.",
- __func__, gpio, retval);
- return retval;
- }
- omap_mux_init_signal("sdmmc2_clk.gpio_130", OMAP_PIN_INPUT_PULLUP);
-
- retval = gpio_direction_input(gpio);
- if (retval) {
- pr_err("%s: Failed to setup attn gpio %d. Code: %d.",
- __func__, gpio, retval);
- gpio_free(gpio);
- }
- } else {
- pr_warn("%s: No way to deconfigure gpio %d.",
- __func__, gpio);
- }
-
- return retval;
-}
-
- #if (SYNAPTICS_MODULE == TM_SAMPLE1)
-#define TM_SAMPLE1_ADDR 0x20
-#define TM_SAMPLE1_ATTN 130
-
-static unsigned char TM_SAMPLE1_f1a_button_codes[] = {};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE1_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE1_f1a_button_codes),
- .map = TM_SAMPLE1_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE1_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE1_capacitance_button_map,
-};
-
-static struct i2c_board_info bus2_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE1_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-
-#elif (SYNAPTICS_MODULE == TM_SAMPLE2)
-#define TM_SAMPLE2_ADDR 0x20
-#define TM_SAMPLE2_ATTN 130
-
-static unsigned char TM_SAMPLE2_f1a_button_codes[] = {KEY_MENU, KEY_BACK};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE2_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE2_f1a_button_codes),
- .map = TM_SAMPLE2_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE2_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE2_capacitance_button_map,
-};
-
-static struct i2c_board_info bus2_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE2_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-
-#elif (SYNAPTICS_MODULE == TM_SAMPLE3)
-#define TM_SAMPLE3_ADDR 0x20
-#define TM_SAMPLE3_ATTN 130
-
-static unsigned char TM_SAMPLE3_f1a_button_codes[] = {KEY_MENU, KEY_HOME,KEY_BACK,KEY_SEARCH};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE3_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE3_f1a_button_codes),
- .map = TM_SAMPLE3_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE3_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE3_capacitance_button_map,
-};
-
-static struct i2c_board_info bus2_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE3_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-#endif
-
-void __init i2c_device_setup(void)
-{
- pr_info(">>>>I2C device setup.");
- if (ARRAY_SIZE(bus2_i2c_devices)) {
- i2c_register_board_info(2, bus2_i2c_devices,
- ARRAY_SIZE(bus2_i2c_devices));
- }
-}
-
-/* End of Synaptics change for beagle board */
-
-static char *usb_functions_adb[] = {
- "adb",
-};
-
-static char *usb_functions_mass_storage[] = {
- "usb_mass_storage",
-};
-static char *usb_functions_ums_adb[] = {
- "usb_mass_storage",
- "adb",
-};
-
-static char *usb_functions_all[] = {
- "adb", "usb_mass_storage",
-};
-
-static struct android_usb_product usb_products[] = {
- {
- .product_id = GOOGLE_PRODUCT_ID,
- .num_functions = ARRAY_SIZE(usb_functions_adb),
- .functions = usb_functions_adb,
- },
- {
- .product_id = GOOGLE_PRODUCT_ID,
- .num_functions = ARRAY_SIZE(usb_functions_mass_storage),
- .functions = usb_functions_mass_storage,
- },
- {
- .product_id = GOOGLE_PRODUCT_ID,
- .num_functions = ARRAY_SIZE(usb_functions_ums_adb),
- .functions = usb_functions_ums_adb,
- },
-};
-
-static struct usb_mass_storage_platform_data mass_storage_pdata = {
- .nluns = 1,
- .vendor = "rowboat",
- .product = "rowboat gadget",
- .release = 0x100,
-};
-
-static struct platform_device usb_mass_storage_device = {
- .name = "usb_mass_storage",
- .id = -1,
- .dev = {
- .platform_data = &mass_storage_pdata,
- },
-};
-
-static struct android_usb_platform_data android_usb_pdata = {
- .vendor_id = GOOGLE_VENDOR_ID,
- .product_id = GOOGLE_PRODUCT_ID,
- .functions = usb_functions_all,
- .products = usb_products,
- .num_products = ARRAY_SIZE(usb_products),
- .version = 0x0100,
- .product_name = "rowboat gadget",
- .manufacturer_name = "rowboat",
- .serial_number = "20100720",
- .num_functions = ARRAY_SIZE(usb_functions_all),
-};
-
-static struct platform_device androidusb_device = {
- .name = "android_usb",
- .id = -1,
- .dev = {
- .platform_data = &android_usb_pdata,
- },
-};
-
-static void omap3beagle_android_gadget_init(void)
-{
- platform_device_register(&androidusb_device);
-}
-#endif
-/*
- * OMAP3 Beagle revision
- * Run time detection of Beagle revision is done by reading GPIO.
- * GPIO ID -
- * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
- * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
- * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
- */
-enum {
- OMAP3BEAGLE_BOARD_UNKN = 0,
- OMAP3BEAGLE_BOARD_AXBX,
- OMAP3BEAGLE_BOARD_C1_3,
- OMAP3BEAGLE_BOARD_C4,
- OMAP3BEAGLE_BOARD_XM,
- OMAP3BEAGLE_BOARD_XMC,
-};
-
-extern void omap_pm_sys_offmode_select(int);
-extern void omap_pm_sys_offmode_pol(int);
-extern void omap_pm_sys_clkreq_pol(int);
-extern void omap_pm_auto_off(int);
-extern void omap_pm_auto_ret(int);
-
-static u8 omap3_beagle_version;
-
-static u8 omap3_beagle_get_rev(void)
-{
- return omap3_beagle_version;
-}
-
-/**
- * Board specific initialization of PM components
- */
-static void __init omap3_beagle_pm_init(void)
-{
- /* Use sys_offmode signal */
- omap_pm_sys_offmode_select(1);
-
- /* sys_clkreq - active high */
- omap_pm_sys_clkreq_pol(1);
-
- /* sys_offmode - active low */
- omap_pm_sys_offmode_pol(0);
-
- /* Automatically send OFF command */
- omap_pm_auto_off(1);
-
- /* Automatically send RET command */
- omap_pm_auto_ret(1);
-}
-
-static void __init omap3_beagle_init_rev(void)
-{
- int ret;
- u16 beagle_rev = 0;
-
- omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
-
- ret = gpio_request(171, "rev_id_0");
- if (ret < 0)
- goto fail0;
-
- ret = gpio_request(172, "rev_id_1");
- if (ret < 0)
- goto fail1;
-
- ret = gpio_request(173, "rev_id_2");
- if (ret < 0)
- goto fail2;
-
- gpio_direction_input(171);
- gpio_direction_input(172);
- gpio_direction_input(173);
-
- beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
- | (gpio_get_value(173) << 2);
-
- switch (beagle_rev) {
- case 7:
- printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
- break;
- case 6:
- printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
- break;
- case 5:
- printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
- break;
- case 2:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
- break;
- case 0:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
- break;
- default:
- printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
- }
-
- return;
-
-fail2:
- gpio_free(172);
-fail1:
- gpio_free(171);
-fail0:
- printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-
- return;
-}
-
-static struct mtd_partition omap3beagle_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader",
- .offset = 0,
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot Env",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 1 * NAND_BLOCK_SIZE,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "File System",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* DSS */
-
-static int beagle_enable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 1);
-
- return 0;
-}
-
-static void beagle_disable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-static struct omap_dss_device beagle_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "generic_panel",
- .phy.dpi.data_lines = 24,
- .reset_gpio = -EINVAL,
- .platform_enable = beagle_enable_dvi,
- .platform_disable = beagle_disable_dvi,
-};
-
-static struct omap_dss_device beagle_tv_device = {
- .name = "tv",
- .driver_name = "venc",
- .type = OMAP_DISPLAY_TYPE_VENC,
- .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-static struct omap_dss_device *beagle_dss_devices[] = {
- &beagle_dvi_device,
- &beagle_tv_device,
-};
-
-static struct omap_dss_board_info beagle_dss_data = {
- .num_devices = ARRAY_SIZE(beagle_dss_devices),
- .devices = beagle_dss_devices,
- .default_device = &beagle_dvi_device,
-};
-
-static struct platform_device beagle_dss_device = {
- .name = "omapdss",
- .id = -1,
- .dev = {
- .platform_data = &beagle_dss_data,
- },
-};
-
-static struct regulator_consumer_supply beagle_vdac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss");
-
-static struct regulator_consumer_supply beagle_vdvi_supply =
- REGULATOR_SUPPLY("vdds_dsi", "omapdss");
-
-static void __init beagle_display_init(void)
-{
- int r;
-
- r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
- if (r < 0) {
- printk(KERN_ERR "Unable to get DVI reset GPIO\n");
- return;
- }
-
- gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
-}
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply beagle_vaux3_supply = {
- .supply = "cam_1v8",
-};
-
-static struct regulator_consumer_supply beagle_vaux4_supply = {
- .supply = "cam_2v8",
-};
-
-static struct gpio_led gpio_leds[];
-
-static int beagle_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
- mmc[0].gpio_wp = -EINVAL;
- } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
- (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
-
- /* link regulators to MMC adapters */
- beagle_vmmc1_supply.dev = mmc[0].dev;
- beagle_vsim_supply.dev = mmc[0].dev;
-
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
- if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
- }
-
- /*
- * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
- * high / others active low)
- */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
- else
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
-
- /* DVI reset GPIO is different between beagle revisions */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)
- beagle_dvi_device.reset_gpio = 129;
- else
- beagle_dvi_device.reset_gpio = 170;
-
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- /* Power on camera interface */
- gpio_request(gpio + 2, "CAM_EN");
- gpio_direction_output(gpio + 2, 1);
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
- } else {
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
- }
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
- /*
- * gpio + 1 on Xm controls the TFP410's enable line (active low)
- * gpio + 2 control varies depending on the board rev as follows:
- * P7/P8 revisions(prototype): Camera EN
- * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
- */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM || omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC) {
- gpio_request(gpio + 1, "nDVI_PWR_EN");
- gpio_direction_output(gpio + 1, 0);
- gpio_request(gpio + 2, "DVI_LDO_EN");
- gpio_direction_output(gpio + 2, 1);
- }
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data beagle_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
- .use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
- | BIT(15) | BIT(16) | BIT(17),
- .setup = beagle_twl_gpio_setup,
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdvi_supply,
-};
-
-/* VAUX3 for CAM_1V8 */
-static struct regulator_init_data beagle_vaux3 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vaux3_supply,
-};
-
- /* VAUX4 for CAM_2V8 */
-static struct regulator_init_data beagle_vaux4 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vaux4_supply,
-};
-
-static struct twl4030_usb_data beagle_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-/**
- * Macro to configure resources
- */
-#define TWL4030_RESCONFIG(res,grp,typ1,typ2,state) \
- { \
- .resource = res, \
- .devgroup = grp, \
- .type = typ1, \
- .type2 = typ2, \
- .remap_sleep = state \
- }
-
-static struct twl4030_resconfig __initdata board_twl4030_rconfig[] = {
- TWL4030_RESCONFIG(RES_VPLL1, DEV_GRP_P1, 3, 1, RES_STATE_OFF), /* ? */
- TWL4030_RESCONFIG(RES_VINTANA1, DEV_GRP_ALL, 1, 2, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_VINTANA2, DEV_GRP_ALL, 0, 2, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_VINTDIG, DEV_GRP_ALL, 1, 2, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_VIO, DEV_GRP_ALL, 2, 2, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_VDD1, DEV_GRP_P1, 4, 1, RES_STATE_OFF), /* ? */
- TWL4030_RESCONFIG(RES_VDD2, DEV_GRP_P1, 3, 1, RES_STATE_OFF), /* ? */
- TWL4030_RESCONFIG(RES_REGEN, DEV_GRP_ALL, 2, 1, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_NRES_PWRON, DEV_GRP_ALL, 0, 1, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_CLKEN, DEV_GRP_ALL, 3, 2, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_SYSEN, DEV_GRP_ALL, 6, 1, RES_STATE_SLEEP),
- TWL4030_RESCONFIG(RES_HFCLKOUT, DEV_GRP_P3, 0, 2, RES_STATE_SLEEP), /* ? */
- TWL4030_RESCONFIG(0, 0, 0, 0, 0),
-};
-
-/**
- * Optimized 'Active to Sleep' sequence
- */
-static struct twl4030_ins omap3beagle_sleep_seq[] __initdata = {
- { MSG_SINGULAR(DEV_GRP_NULL, RES_HFCLKOUT, RES_STATE_SLEEP), 20},
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1, RES_STATE_SLEEP), 2 },
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2, RES_STATE_SLEEP), 2 },
-};
-
-static struct twl4030_script omap3beagle_sleep_script __initdata = {
- .script = omap3beagle_sleep_seq,
- .size = ARRAY_SIZE(omap3beagle_sleep_seq),
- .flags = TWL4030_SLEEP_SCRIPT,
-};
-
-/**
- * Optimized 'Sleep to Active (P12)' sequence
- */
-static struct twl4030_ins omap3beagle_wake_p12_seq[] __initdata = {
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1, RES_STATE_ACTIVE), 2 }
-};
-
-static struct twl4030_script omap3beagle_wake_p12_script __initdata = {
- .script = omap3beagle_wake_p12_seq,
- .size = ARRAY_SIZE(omap3beagle_wake_p12_seq),
- .flags = TWL4030_WAKEUP12_SCRIPT,
-};
-
-/**
- * Optimized 'Sleep to Active' (P3) sequence
- */
-static struct twl4030_ins omap3beagle_wake_p3_seq[] __initdata = {
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2, RES_STATE_ACTIVE), 2 }
-};
-
-static struct twl4030_script omap3beagle_wake_p3_script __initdata = {
- .script = omap3beagle_wake_p3_seq,
- .size = ARRAY_SIZE(omap3beagle_wake_p3_seq),
- .flags = TWL4030_WAKEUP3_SCRIPT,
-};
-
-/**
- * Optimized warm reset sequence (for less power surge)
- */
-static struct twl4030_ins omap3beagle_wrst_seq[] __initdata = {
- { MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 0x2 },
- { MSG_SINGULAR(DEV_GRP_NULL, RES_MAIN_REF, RES_STATE_WRST), 2 },
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2, RES_STATE_WRST), 0x2},
- { MSG_SINGULAR(DEV_GRP_NULL, RES_VUSB_3V1, RES_STATE_WRST), 0x2 },
- { MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x2 },
- { MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x7 },
- { MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x25 },
- { MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0, RES_STATE_WRST), 0x2 },
- { MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 0x2 },
-
-};
-
-static struct twl4030_script omap3beagle_wrst_script __initdata = {
- .script = omap3beagle_wrst_seq,
- .size = ARRAY_SIZE(omap3beagle_wrst_seq),
- .flags = TWL4030_WRST_SCRIPT,
-};
-
-static struct twl4030_script __initdata *board_twl4030_scripts[] = {
- &omap3beagle_wake_p12_script,
- &omap3beagle_wake_p3_script,
- &omap3beagle_sleep_script,
- &omap3beagle_wrst_script
-};
-
-static struct twl4030_power_data __initdata omap3beagle_script_data = {
- .scripts = board_twl4030_scripts,
- .num = ARRAY_SIZE(board_twl4030_scripts),
- .resource_config = board_twl4030_rconfig,
-};
-
-static struct twl4030_codec_audio_data beagle_audio_data = {
- .audio_mclk = 26000000,
- .digimic_delay = 1,
- .ramp_delay_value = 1,
- .offset_cncl_path = 1,
- .check_defaults = false,
- .reset_registers = false,
- .reset_registers = false,
-};
-
-static struct twl4030_codec_data beagle_codec_data = {
- .audio_mclk = 26000000,
- .audio = &beagle_audio_data,
-};
-
-static struct twl4030_platform_data beagle_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
- /* platform_data for children goes here */
- .usb = &beagle_usb_data,
- .gpio = &beagle_gpio_data,
- .codec = &beagle_codec_data,
- .vmmc1 = &beagle_vmmc1,
- .vsim = &beagle_vsim,
- .vdac = &beagle_vdac,
- .vpll2 = &beagle_vpll2,
- .vaux3 = &beagle_vaux3,
- .vaux4 = &beagle_vaux4,
- .power = &omap3beagle_script_data,
-};
-
-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &beagle_twldata,
- },
-};
-
-static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static int __init omap3_beagle_i2c_init(void)
-{
- omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
- ARRAY_SIZE(beagle_i2c_boardinfo));
-
- /* Bus 2 is used for Camera/Sensor interface */
- if (ARRAY_SIZE(bus2_i2c_devices))
- omap_register_i2c_bus(2, 400, bus2_i2c_devices,
- ARRAY_SIZE(bus2_i2c_devices));
- else
- omap_register_i2c_bus(2, 400, NULL, 0);
-
- /* Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
-
- return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "beagleboard::usr0",
- .default_trigger = "heartbeat",
- .gpio = 150,
- },
- {
- .name = "beagleboard::usr1",
- .default_trigger = "mmc0",
- .gpio = 149,
- },
- {
- .name = "beagleboard::pmu_stat",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = 4,
- .desc = "user",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_key_info,
- },
-};
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- omap_init_irq();
- gpmc_init();
-#ifdef CONFIG_OMAP_32K_TIMER
- if (omap3_beagle_version == OMAP3BEAGLE_BOARD_AXBX)
- omap2_gp_clockevent_set_gptimer(12);
- else
- omap2_gp_clockevent_set_gptimer(1);
-#endif
-}
-
-static struct platform_device *omap3_beagle_devices[] __initdata = {
- &leds_gpio,
- &keys_gpio,
- &beagle_dss_device,
- &usb_mass_storage_device,
-};
-
-static void __init omap3beagle_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- board_nand_init(omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions),
- nandcs, NAND_BUSWIDTH_16);
- }
-}
-
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-
- .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
- .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
- OMAP_PIN_OFF_WAKEUPENABLE),
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_ULPI,
- .mode = MUSB_OTG,
- .power = 100,
-};
-
-static void __init omap3_beagle_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap3_beagle_init_rev();
- omap3_beagle_i2c_init();
- platform_add_devices(omap3_beagle_devices,
- ARRAY_SIZE(omap3_beagle_devices));
- omap_serial_init();
-
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- gpio_request(170, "DVI_nPD");
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
-
- usb_musb_init(&musb_board_data);
- usb_ehci_init(&ehci_pdata);
- omap3beagle_flash_init();
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_display_init();
-#ifdef CONFIG_USB_ANDROID
- omap3beagle_android_gadget_init();
-#endif
- omap3_beagle_pm_init();
-}
-
-MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .boot_params = 0x80000100,
- .map_io = omap3_map_io,
- .reserve = omap_reserve,
- .init_irq = omap3_beagle_init_irq,
- .init_machine = omap3_beagle_init,
- .timer = &omap_timer,
-MACHINE_END
diff --git a/kernel/arch/arm/mach-omap2/board-omap4panda.c b/kernel/arch/arm/mach-omap2/board-omap4panda.c
deleted file mode 100644
index 4f8c79d..0000000
--- a/kernel/arch/arm/mach-omap2/board-omap4panda.c
+++ /dev/null
@@ -1,1053 +0,0 @@
-/*
- * Board support file for OMAP4430 based PandaBoard.
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * Author: David Anders <x0132446@ti.com>
- *
- * Based on mach-omap2/board-4430sdp.c
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/omapfb.h>
-#include <linux/reboot.h>
-#include <linux/usb/otg.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/memblock.h>
-#include <linux/skbuff.h>
-#include <linux/ti_wilink_st.h>
-#include <linux/platform_data/ram_console.h>
-
-#include <mach/hardware.h>
-#include <mach/omap4-common.h>
-#include <mach/emif.h>
-#include <mach/lpddr2-elpida.h>
-#include <mach/dmm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <video/omapdss.h>
-
-#include <plat/board.h>
-#include <plat/common.h>
-#include <plat/usb.h>
-#include <plat/mmc.h>
-#include <plat/remoteproc.h>
-#include <plat/vram.h>
-#include <video/omap-panel-generic-dpi.h>
-#include "timer-gp.h"
-
-#include "hsmmc.h"
-#include "control.h"
-#include "mux.h"
-#include "common-board-devices.h"
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "pm.h"
-#include "resetreason.h"
-
-#ifdef CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4
-#include <linux/input/synaptics_dsx.h>
-#define TM_SAMPLE1 (1) // 2D only
-#define TM_SAMPLE2 (2) // 2D + 0D x 2
-#define TM_SAMPLE3 (3) // 2D + 0D x 4
-#define SYNAPTICS_MODULE TM_SAMPLE1
-#endif
-
-#define PANDA_RAMCONSOLE_START (PLAT_PHYS_OFFSET + SZ_512M)
-#define PANDA_RAMCONSOLE_SIZE SZ_2M
-
-#define GPIO_HUB_POWER 1
-#define GPIO_HUB_NRESET 62
-#define GPIO_WIFI_PMENA 43
-#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_CT_CP_HPD 60
-#define HDMI_GPIO_HPD 63 /* Hot plug pin for HDMI */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define TPS62361_GPIO 7 /* VCORE1 power control */
-#define PANDA_BT_GPIO 46
-
-
-#define PHYS_ADDR_SMC_SIZE (SZ_1M * 3)
-#define PHYS_ADDR_SMC_MEM (0x80000000 + SZ_1G - PHYS_ADDR_SMC_SIZE)
-#define OMAP_ION_HEAP_SECURE_INPUT_SIZE (SZ_1M * 90)
-#define PHYS_ADDR_DUCATI_SIZE (SZ_1M * 105)
-#define PHYS_ADDR_DUCATI_MEM (PHYS_ADDR_SMC_MEM - PHYS_ADDR_DUCATI_SIZE - \
- OMAP_ION_HEAP_SECURE_INPUT_SIZE)
-
-#define WILINK_UART_DEV_NAME "/dev/ttyO1"
-
-
-/* Synaptics changes for PandaBoard */
-#ifdef CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4
-static int synaptics_gpio_setup(unsigned gpio, bool configure)
-{
- int retval = 0;
-
- if (configure) {
- retval = gpio_request(gpio, "rmi4_attn");
- if (retval) {
- pr_err("%s: Failed to get attn gpio %d (code: %d)",
- __func__, gpio, retval);
- return retval;
- }
- omap_mux_init_signal("gpmc_ad15.gpio_39", OMAP_PIN_INPUT_PULLUP);
-
- retval = gpio_direction_input(gpio);
- if (retval) {
- pr_err("%s: Failed to setup attn gpio %d (code: %d)",
- __func__, gpio, retval);
- gpio_free(gpio);
- }
- } else {
- pr_warn("%s: No way to deconfigure gpio %d",
- __func__, gpio);
- }
-
- return retval;
-}
-
- #if (SYNAPTICS_MODULE == TM_SAMPLE1)
-#define TM_SAMPLE1_ADDR 0x20
-#define TM_SAMPLE1_ATTN 130
-
-static unsigned char TM_SAMPLE1_f1a_button_codes[] = {};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE1_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE1_f1a_button_codes),
- .map = TM_SAMPLE1_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE1_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE1_capacitance_button_map,
-};
-
-static struct i2c_board_info bus4_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE1_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-
-#elif (SYNAPTICS_MODULE == TM_SAMPLE2)
-#define TM_SAMPLE2_ADDR 0x20
-#define TM_SAMPLE2_ATTN 130
-
-static unsigned char TM_SAMPLE2_f1a_button_codes[] = {KEY_MENU, KEY_BACK};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE2_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE2_f1a_button_codes),
- .map = TM_SAMPLE2_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE2_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE2_capacitance_button_map,
-};
-
-static struct i2c_board_info bus4_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE2_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-};
-
-#elif (SYNAPTICS_MODULE == TM_SAMPLE3)
-#define TM_SAMPLE3_ADDR 0x20
-#define TM_SAMPLE3_ATTN 130
-
-static unsigned char TM_SAMPLE3_f1a_button_codes[] = {KEY_MENU, KEY_HOME,KEY_BACK,KEY_SEARCH};
-
-static struct synaptics_rmi4_capacitance_button_map TM_SAMPLE3_capacitance_button_map = {
- .nbuttons = ARRAY_SIZE(TM_SAMPLE3_f1a_button_codes),
- .map = TM_SAMPLE3_f1a_button_codes,
-};
-
-static struct synaptics_rmi4_platform_data rmi4_platformdata = {
- .irq_flags = IRQF_TRIGGER_FALLING,
- .irq_gpio = TM_SAMPLE3_ATTN,
- .gpio_config = synaptics_gpio_setup,
- .capacitance_button_map = &TM_SAMPLE3_capacitance_button_map,
-};
-
-static struct i2c_board_info bus4_i2c_devices[] = {
- {
- I2C_BOARD_INFO("synaptics_rmi4_i2c", TM_SAMPLE3_ADDR),
- .platform_data = &rmi4_platformdata,
- },
-};
-#endif
-
-void __init i2c_device_setup(void)
-{
- pr_info(">>>>I2C device setup");
- if (ARRAY_SIZE(bus4_i2c_devices)) {
- i2c_register_board_info(4, bus4_i2c_devices,
- ARRAY_SIZE(bus4_i2c_devices));
- }
-}
-#endif
-/* End of Synaptics changes for PandaBoard */
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "pandaboard::status1",
- .default_trigger = "heartbeat",
- .gpio = 7,
- },
- {
- .name = "pandaboard::status2",
- .default_trigger = "mmc0",
- .gpio = 8,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-/* GPIO_KEY for the panda */
-static struct gpio_keys_button panda_gpio_keys_buttons[] = {
- [0] = {
- .code = KEY_HOME,
- .gpio = 113,
- .desc = "user_button",
- .active_low = 1,
- .debounce_interval = 5,
- },
-};
-
-static struct gpio_keys_platform_data panda_gpio_keys = {
- .buttons = panda_gpio_keys_buttons,
- .nbuttons = ARRAY_SIZE(panda_gpio_keys_buttons),
- .rep = 0,
-};
-
-static struct platform_device panda_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &panda_gpio_keys,
- },
-};
-
-/* TODO: handle suspend/resume here.
- * Upon every suspend, make sure the wilink chip is
- * capable enough to wake-up the OMAP host.
- */
-static int plat_wlink_kim_suspend(struct platform_device *pdev, pm_message_t
- state)
-{
- return 0;
-}
-
-static int plat_wlink_kim_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-/* wl128x BT, FM, GPS connectivity chip */
-static struct ti_st_plat_data wilink_pdata = {
- .nshutdown_gpio = PANDA_BT_GPIO,
- .dev_name = WILINK_UART_DEV_NAME,
- .flow_cntrl = 1,
- .baud_rate = 3686400,
- .suspend = plat_wlink_kim_suspend,
- .resume = plat_wlink_kim_resume,
-};
-
-static struct platform_device btwilink_device = {
- .name = "btwilink",
- .id = -1,
-};
-
-/* wl127x BT, FM, GPS connectivity chip */
-static struct platform_device wl1271_device = {
- .name = "kim",
- .id = -1,
- .dev.platform_data = &wilink_pdata,
-};
-
-
-static struct platform_device *panda_devices[] __initdata = {
- &leds_gpio,
- &wl1271_device,
- &btwilink_device,
- &panda_gpio_keys_device,
-};
-
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
-};
-
-static void __init omap4_ehci_init(void)
-{
- int ret;
- struct clk *phy_ref_clk;
-
- /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
-
- usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
-}
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_UTMI,
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- .mode = MUSB_PERIPHERAL,
-#else
- .mode = MUSB_OTG,
-#endif
- .power = 100,
-};
-
-static struct twl4030_usb_data omap4_usbphy_data = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = -EINVAL,
- .gpio_cd = -EINVAL,
- },
- {
- .name = "wl1271",
- .mmc = 5,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
- .gpio_wp = -EINVAL,
- .gpio_cd = -EINVAL,
- .ocr_mask = MMC_VDD_165_195,
- .nonremovable = true,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.0",
- },
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.4",
-};
-
-static struct regulator_init_data panda_vmmc5 = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap4_panda_vmmc5_supply,
-};
-
-static struct fixed_voltage_config panda_vwlan = {
- .supply_name = "vwl1271",
- .microvolts = 1800000, /* 1.8V */
- .gpio = GPIO_WIFI_PMENA,
- .startup_delay = 70000, /* 70msec */
- .enable_high = 1,
- .enabled_at_boot = 0,
- .init_data = &panda_vmmc5,
-};
-
-static struct platform_device omap_vwlan_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &panda_vwlan,
- },
-};
-
-struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
- /* PANDA ref clock is 38.4 MHz */
- .board_ref_clock = 2,
-};
-
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int ret = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- if (!pdata) {
- dev_err(dev, "%s: NULL platform data\n", __func__);
- return -EINVAL;
- }
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- ret = twl6030_mmc_card_detect_config();
- if (ret)
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, ret);
- else
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return ret;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
- return;
- }
- pdata = dev->platform_data;
-
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap2_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
-
- return 0;
-}
-
-static struct regulator_init_data omap4_panda_vaux2 = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vaux3 = {
- .constraints = {
- .min_uV = 1000000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_panda_vmmc = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = omap4_panda_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_panda_vpp = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2500000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vana = {
- .constraints = {
- .min_uV = 2100000,
- .max_uV = 2100000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vcxio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_consumer_supply panda_vdac_supply[] = {
- {
- .supply = "hdmi_vref",
- },
-};
-
-static struct regulator_init_data omap4_panda_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(panda_vdac_supply),
- .consumer_supplies = panda_vdac_supply,
-};
-
-static struct regulator_init_data omap4_panda_vusb = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_clk32kg = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .always_on = true,
- },
-};
-
-static void omap4_audio_conf(void)
-{
- /* twl6040 naudint */
- omap_mux_init_signal("sys_nirq2.sys_nirq2", \
- OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct twl4030_codec_audio_data twl6040_audio = {
- /* single-step ramp for headset and handsfree */
- .hs_left_step = 0x0f,
- .hs_right_step = 0x0f,
- .hf_left_step = 0x1d,
- .hf_right_step = 0x1d,
- .hs_switch_dev = 0x1,
- .hs_forced_hs_state = 0x1
-};
-
-static struct twl4030_codec_data twl6040_codec = {
- .audio = &twl6040_audio,
- .audpwron_gpio = 127,
- .naudint_irq = OMAP44XX_IRQ_SYS_2N,
- .irq_base = TWL6040_CODEC_IRQ_BASE,
-};
-
-static struct twl4030_platform_data omap4_panda_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-
- /* Regulators */
- .vmmc = &omap4_panda_vmmc,
- .vpp = &omap4_panda_vpp,
- .vana = &omap4_panda_vana,
- .vcxio = &omap4_panda_vcxio,
- .vdac = &omap4_panda_vdac,
- .vusb = &omap4_panda_vusb,
- .vaux2 = &omap4_panda_vaux2,
- .vaux3 = &omap4_panda_vaux3,
- .clk32kg = &omap4_panda_clk32kg,
- .usb = &omap4_usbphy_data,
-
- /* children */
- .codec = &twl6040_codec,
-};
-
-/*
- * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
- * is connected as I2C slave device, and can be accessed at address 0x50
- */
-static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static int __init omap4_panda_i2c_init(void)
-{
- omap4_pmic_init("twl6030", &omap4_panda_twldata);
- omap_register_i2c_bus(2, 400, NULL, 0);
- /*
- * Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz
- */
- omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
- ARRAY_SIZE(panda_i2c_eeprom));
- if(ARRAY_SIZE(bus4_i2c_devices))
- omap_register_i2c_bus(4, 400, bus4_i2c_devices, ARRAY_SIZE(bus4_i2c_devices));
- else
- omap_register_i2c_bus(4, 400, NULL, 0);
- return 0;
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* WLAN IRQ - GPIO 53 */
- OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- /* WLAN POWER ENABLE - GPIO 43 */
- OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
- /* WLAN SDIO: MMC5 CMD */
- OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 CLK */
- OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 DAT[0-3] */
- OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* gpio 0 - TFP410 PD */
- OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
- /* dispc2_data23 */
- OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data22 */
- OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data21 */
- OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data20 */
- OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data19 */
- OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data18 */
- OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data15 */
- OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data14 */
- OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data13 */
- OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data12 */
- OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data11 */
- OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data10 */
- OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data9 */
- OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data16 */
- OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data17 */
- OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_hsync */
- OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_pclk */
- OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_vsync */
- OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_de */
- OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data8 */
- OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data7 */
- OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data6 */
- OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data5 */
- OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data4 */
- OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data3 */
- OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data2 */
- OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data1 */
- OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data0 */
- OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static inline void __init board_serial_init(void)
-{
- omap_serial_init();
-}
-#else
-#define board_mux NULL
-
-static inline void __init board_serial_init(void)
-{
- omap_serial_init();
-}
-#endif
-
-/* Display DVI */
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-/* Using generic display panel */
-static struct panel_generic_dpi_data omap4_dvi_panel = {
- .name = "generic_720p",
- .platform_enable = omap4_panda_enable_dvi,
- .platform_disable = omap4_panda_disable_dvi,
-};
-
-struct omap_dss_device omap4_panda_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "generic_dpi_panel",
- .data = &omap4_dvi_panel,
- .phy.dpi.data_lines = 24,
- .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
- .channel = OMAP_DSS_CHANNEL_LCD2,
-};
-
-int __init omap4_panda_dvi_init(void)
-{
- int r;
-
- /* Requesting TFP410 DVI GPIO and disabling it, at bootup */
- r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "DVI PD");
- if (r)
- pr_err("Failed to get DVI powerdown GPIO\n");
-
- return r;
-}
-
-static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
- { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
-};
-
-static void omap4_panda_hdmi_mux_init(void)
-{
- u32 r;
- int status;
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd.hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("gpmc_wait2.gpio_100",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("hdmi_cec.hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
- omap_mux_init_signal("hdmi_ddc_scl.hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda.hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-
- /* strong pullup on DDC lines using unpublished register */
- r = ((1 << 24) | (1 << 28)) ;
- omap4_ctrl_pad_writel(r, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1);
-
- gpio_request(HDMI_GPIO_HPD, NULL);
- omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT | OMAP_PULL_ENA);
- gpio_direction_input(HDMI_GPIO_HPD);
-
- status = gpio_request_array(panda_hdmi_gpios,
- ARRAY_SIZE(panda_hdmi_gpios));
- if (status)
- pr_err("%s: Cannot request HDMI GPIOs %x \n", __func__, status);
-}
-
-static struct omap_dss_device omap4_panda_hdmi_device = {
- .name = "hdmi",
- .driver_name = "hdmi_panel",
- .type = OMAP_DISPLAY_TYPE_HDMI,
- .clocks = {
- .dispc = {
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
- .hdmi = {
- .regn = 15,
- .regm2 = 1,
- },
- },
- .hpd_gpio = HDMI_GPIO_HPD,
- .channel = OMAP_DSS_CHANNEL_DIGIT,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
- &omap4_panda_dvi_device,
- &omap4_panda_hdmi_device,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
- .num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
- .devices = omap4_panda_dss_devices,
- .default_device = &omap4_panda_dvi_device,
-};
-
-/*
- * LPDDR2 Configeration Data:
- * The memory organisation is as below :
- * EMIF1 - CS0 - 2 Gb
- * CS1 - 2 Gb
- * EMIF2 - CS0 - 2 Gb
- * CS1 - 2 Gb
- * --------------------
- * TOTAL - 8 Gb
- *
- * Same devices installed on EMIF1 and EMIF2
- */
-static __initdata struct emif_device_details emif_devices = {
- .cs0_device = &lpddr2_elpida_2G_S4_dev,
- .cs1_device = &lpddr2_elpida_2G_S4_dev
-};
-
-void omap4_panda_display_init(void)
-{
- int r;
-
- r = omap4_panda_dvi_init();
- if (r)
- pr_err("error initializing panda DVI\n");
-
- omap4_panda_hdmi_mux_init();
- omap_display_init(&omap4_panda_dss_data);
-}
-
-static int panda_notifier_call(struct notifier_block *this,
- unsigned long code, void *cmd)
-{
- void __iomem *sar_base;
- u32 v = OMAP4430_RST_GLOBAL_COLD_SW_MASK;
-
- sar_base = omap4_get_sar_ram_base();
-
- if (!sar_base)
- return notifier_from_errno(-ENOMEM);
-
- if ((code == SYS_RESTART) && (cmd != NULL)) {
- /* cmd != null; case: warm boot */
- if (!strcmp(cmd, "bootloader")) {
- /* Save reboot mode in scratch memory */
- strcpy(sar_base + 0xA0C, cmd);
- v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
- } else if (!strcmp(cmd, "recovery")) {
- /* Save reboot mode in scratch memory */
- strcpy(sar_base + 0xA0C, cmd);
- v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
- } else {
- v |= OMAP4430_RST_GLOBAL_COLD_SW_MASK;
- }
- }
-
- omap4_prm_write_inst_reg(0xfff, OMAP4430_PRM_DEVICE_INST,
- OMAP4_RM_RSTST);
- omap4_prm_write_inst_reg(v, OMAP4430_PRM_DEVICE_INST, OMAP4_RM_RSTCTRL);
- v = omap4_prm_read_inst_reg(WKUP_MOD, OMAP4_RM_RSTCTRL);
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block panda_reboot_notifier = {
- .notifier_call = panda_notifier_call,
-};
-
-#define PANDA_FB_RAM_SIZE SZ_16M /* 1920?1080*4 * 2 */
-static struct omapfb_platform_data panda_fb_pdata = {
- .mem_desc = {
- .region_cnt = 1,
- .region = {
- [0] = {
- .size = PANDA_FB_RAM_SIZE,
- },
- },
- },
-};
-
-static struct resource ramconsole_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = PANDA_RAMCONSOLE_START,
- .end = PANDA_RAMCONSOLE_START + PANDA_RAMCONSOLE_SIZE - 1,
- },
-};
-
-static struct ram_console_platform_data ramconsole_pdata;
-
-static struct platform_device ramconsole_device = {
- .name = "ram_console",
- .id = -1,
- .num_resources = ARRAY_SIZE(ramconsole_resources),
- .resource = ramconsole_resources,
- .dev = {
- .platform_data = &ramconsole_pdata,
- },
-};
-
-extern void __init omap4_panda_android_init(void);
-
-static void __init omap4_panda_init(void)
-{
- int package = OMAP_PACKAGE_CBS;
- int status;
-
- omap_emif_setup_device_details(&emif_devices, &emif_devices);
-
- if (omap_rev() == OMAP4430_REV_ES1_0)
- package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, NULL, package);
-
- if (wl12xx_set_platform_data(&omap_panda_wlan_data))
- pr_err("error setting wl12xx data\n");
-
- register_reboot_notifier(&panda_reboot_notifier);
- ramconsole_pdata.bootinfo = omap4_get_resetreason();
- platform_device_register(&ramconsole_device);
- omap4_panda_i2c_init();
- omap4_audio_conf();
-
- if (cpu_is_omap4430())
- panda_gpio_keys_buttons[0].gpio = 121;
-
- platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
- platform_device_register(&omap_vwlan_device);
- board_serial_init();
- omap4_twl6030_hsmmc_init(mmc);
- omap4_ehci_init();
- usb_musb_init(&musb_board_data);
-
- omap_dmm_init();
- omap_vram_set_sdram_vram(PANDA_FB_RAM_SIZE, 0);
- omapfb_set_platform_data(&panda_fb_pdata);
- omap4_panda_display_init();
-
- if (cpu_is_omap446x()) {
- /* Vsel0 = gpio, vsel1 = gnd */
- status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
- OMAP_PIN_OFF_OUTPUT_HIGH, -1);
- if (status)
- pr_err("TPS62361 initialization failed: %d\n", status);
- }
- omap_enable_smartreflex_on_init();
-}
-
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
-static void __init omap4_panda_reserve(void)
-{
- /* do the static reservations first */
- memblock_remove(PANDA_RAMCONSOLE_START, PANDA_RAMCONSOLE_SIZE);
- memblock_remove(PHYS_ADDR_SMC_MEM, PHYS_ADDR_SMC_SIZE);
- memblock_remove(PHYS_ADDR_DUCATI_MEM, PHYS_ADDR_DUCATI_SIZE);
- /* ipu needs to recognize secure input buffer area as well */
- omap_ipu_set_static_mempool(PHYS_ADDR_DUCATI_MEM, PHYS_ADDR_DUCATI_SIZE +
- OMAP_ION_HEAP_SECURE_INPUT_SIZE);
-
- omap_reserve();
-}
-
-MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
- /* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
- .reserve = omap4_panda_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
- .init_irq = gic_init_irq,
- .init_machine = omap4_panda_init,
- .timer = &omap_timer,
-MACHINE_END
diff --git a/kernel/drivers/input/touchscreen/Kconfig b/kernel/drivers/input/touchscreen/Kconfig
deleted file mode 100644
index 18655c0..0000000
--- a/kernel/drivers/input/touchscreen/Kconfig
+++ /dev/null
@@ -1,721 +0,0 @@
-#
-# Touchscreen driver configuration
-#
-menuconfig INPUT_TOUCHSCREEN
- bool "Touchscreens"
- help
- Say Y here, and a list of supported touchscreens will be displayed.
- This option doesn't affect the kernel.
-
- If unsure, say Y.
-
-if INPUT_TOUCHSCREEN
-
-config TOUCHSCREEN_88PM860X
- tristate "Marvell 88PM860x touchscreen"
- depends on MFD_88PM860X
- help
- Say Y here if you have a 88PM860x PMIC and want to enable
- support for the built-in touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called 88pm860x-ts.
-
-config TOUCHSCREEN_ADS7846
- tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
- depends on SPI_MASTER
- depends on HWMON = n || HWMON
- help
- Say Y here if you have a touchscreen interface using the
- ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
- and your board-specific setup code includes that in its
- table of SPI devices.
-
- If HWMON is selected, and the driver is told the reference voltage
- on your board, you will also get hwmon interfaces for the voltage
- (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
-
- If unsure, say N (but it's safe to say "Y").
-
- To compile this driver as a module, choose M here: the
- module will be called ads7846.
-
-config TOUCHSCREEN_AD7877
- tristate "AD7877 based touchscreens"
- depends on SPI_MASTER
- help
- Say Y here if you have a touchscreen interface using the
- AD7877 controller, and your board-specific initialization
- code includes that in its table of SPI devices.
-
- If unsure, say N (but it's safe to say "Y").
-
- To compile this driver as a module, choose M here: the
- module will be called ad7877.
-
-config TOUCHSCREEN_AD7879
- tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
- help
- Say Y here if you want to support a touchscreen interface using
- the AD7879-1/AD7889-1 controller.
-
- You should select a bus connection too.
-
- To compile this driver as a module, choose M here: the
- module will be called ad7879.
-
-config TOUCHSCREEN_AD7879_I2C
- tristate "support I2C bus connection"
- depends on TOUCHSCREEN_AD7879 && I2C
- help
- Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called ad7879-i2c.
-
-config TOUCHSCREEN_AD7879_SPI
- tristate "support SPI bus connection"
- depends on TOUCHSCREEN_AD7879 && SPI_MASTER
- help
- Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
-
- If unsure, say N (but it's safe to say "Y").
-
- To compile this driver as a module, choose M here: the
- module will be called ad7879-spi.
-
-config TOUCHSCREEN_BITSY
- tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
- depends on SA1100_BITSY
- select SERIO
- help
- Say Y here if you have the h3600 (Bitsy) touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called h3600_ts_input.
-
-config TOUCHSCREEN_BU21013
- tristate "BU21013 based touch panel controllers"
- depends on I2C
- help
- Say Y here if you have a bu21013 touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called bu21013_ts.
-
-config TOUCHSCREEN_CY8CTMG110
- tristate "cy8ctmg110 touchscreen"
- depends on I2C
- depends on GPIOLIB
-
- help
- Say Y here if you have a cy8ctmg110 capacitive touchscreen on
- an AAVA device.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called cy8ctmg110_ts.
-
-config TOUCHSCREEN_DA9034
- tristate "Touchscreen support for Dialog Semiconductor DA9034"
- depends on PMIC_DA903X
- default y
- help
- Say Y here to enable the support for the touchscreen found
- on Dialog Semiconductor DA9034 PMIC.
-
-config TOUCHSCREEN_DYNAPRO
- tristate "Dynapro serial touchscreen"
- select SERIO
- help
- Say Y here if you have a Dynapro serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called dynapro.
-
-config TOUCHSCREEN_HAMPSHIRE
- tristate "Hampshire serial touchscreen"
- select SERIO
- help
- Say Y here if you have a Hampshire serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called hampshire.
-
-config TOUCHSCREEN_EETI
- tristate "EETI touchscreen panel support"
- depends on I2C
- help
- Say Y here to enable support for I2C connected EETI touch panels.
-
- To compile this driver as a module, choose M here: the
- module will be called eeti_ts.
-
-config TOUCHSCREEN_FUJITSU
- tristate "Fujitsu serial touchscreen"
- select SERIO
- help
- Say Y here if you have the Fujitsu touchscreen (such as one
- installed in Lifebook P series laptop) connected to your
- system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called fujitsu-ts.
-
-config TOUCHSCREEN_S3C2410
- tristate "Samsung S3C2410/generic touchscreen input driver"
- depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
- select S3C_ADC
- help
- Say Y here if you have the s3c2410 touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called s3c2410_ts.
-
-config TOUCHSCREEN_GUNZE
- tristate "Gunze AHL-51S touchscreen"
- select SERIO
- help
- Say Y here if you have the Gunze AHL-51 touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called gunze.
-
-config TOUCHSCREEN_ELO
- tristate "Elo serial touchscreens"
- select SERIO
- help
- Say Y here if you have an Elo serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called elo.
-
-config TOUCHSCREEN_WACOM_W8001
- tristate "Wacom W8001 penabled serial touchscreen"
- select SERIO
- help
- Say Y here if you have an Wacom W8001 penabled serial touchscreen
- connected to your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called wacom_w8001.
-
-config TOUCHSCREEN_LPC32XX
- tristate "LPC32XX touchscreen controller"
- depends on ARCH_LPC32XX
- help
- Say Y here if you have a LPC32XX device and want
- to support the built-in touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called lpc32xx_ts.
-
-config TOUCHSCREEN_MCS5000
- tristate "MELFAS MCS-5000 touchscreen"
- depends on I2C
- help
- Say Y here if you have the MELFAS MCS-5000 touchscreen controller
- chip in your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called mcs5000_ts.
-
-config TOUCHSCREEN_MTOUCH
- tristate "MicroTouch serial touchscreens"
- select SERIO
- help
- Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called mtouch.
-
-config TOUCHSCREEN_INEXIO
- tristate "iNexio serial touchscreens"
- select SERIO
- help
- Say Y here if you have an iNexio serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called inexio.
-
-config TOUCHSCREEN_INTEL_MID
- tristate "Intel MID platform resistive touchscreen"
- depends on INTEL_SCU_IPC
- help
- Say Y here if you have a Intel MID based touchscreen in
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called intel_mid_touch.
-
-config TOUCHSCREEN_MK712
- tristate "ICS MicroClock MK712 touchscreen"
- help
- Say Y here if you have the ICS MicroClock MK712 touchscreen
- controller chip in your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called mk712.
-
-config TOUCHSCREEN_HP600
- tristate "HP Jornada 6xx touchscreen"
- depends on SH_HP6XX && SH_ADC
- help
- Say Y here if you have a HP Jornada 620/660/680/690 and want to
- support the built-in touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called hp680_ts_input.
-
-config TOUCHSCREEN_HP7XX
- tristate "HP Jornada 7xx touchscreen"
- depends on SA1100_JORNADA720_SSP
- help
- Say Y here if you have a HP Jornada 710/720/728 and want
- to support the built-in touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called jornada720_ts.
-
-config TOUCHSCREEN_HTCPEN
- tristate "HTC Shift X9500 touchscreen"
- depends on ISA
- help
- Say Y here if you have an HTC Shift UMPC also known as HTC X9500
- Clio / Shangrila and want to support the built-in touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called htcpen.
-
-config TOUCHSCREEN_PENMOUNT
- tristate "Penmount serial touchscreen"
- select SERIO
- help
- Say Y here if you have a Penmount serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called penmount.
-
-config TOUCHSCREEN_QT602240
- tristate "QT602240 I2C Touchscreen"
- depends on I2C
- help
- Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
- connected to your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called qt602240_ts.
-
-config TOUCHSCREEN_MIGOR
- tristate "Renesas MIGO-R touchscreen"
- depends on SH_MIGOR && I2C
- help
- Say Y here to enable MIGO-R touchscreen support.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called migor_ts.
-
-config TOUCHSCREEN_TNETV107X
- tristate "TI TNETV107X touchscreen support"
- depends on ARCH_DAVINCI_TNETV107X
- help
- Say Y here if you want to use the TNETV107X touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called tnetv107x-ts.
-
-config TOUCHSCREEN_SYNAPTICS_I2C_RMI4
- tristate "Synaptics DSX I2C touchscreen"
- depends on I2C
- help
- Say Y here if you have a Synaptics DSX I2C touchscreen
- connected to your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called synaptics_i2c_rmi4.
-
-config TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV
- tristate "Synaptics I2C touchscreen rmi device"
- depends on TOUCHSCREEN_SYNAPTICS_I2C_RMI4
- help
- This enables support for character device channel for Synaptics RMI
- touchscreens.
-
-config TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE
- tristate "Synaptics I2C touchscreen firmware update"
- depends on TOUCHSCREEN_SYNAPTICS_I2C_RMI4
- help
- This enables support for firmware update for Synaptics RMI
- touchscreens.
-
-config TOUCHSCREEN_TOUCHRIGHT
- tristate "Touchright serial touchscreen"
- select SERIO
- help
- Say Y here if you have a Touchright serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called touchright.
-
-config TOUCHSCREEN_TOUCHWIN
- tristate "Touchwin serial touchscreen"
- select SERIO
- help
- Say Y here if you have a Touchwin serial touchscreen connected to
- your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called touchwin.
-
-config TOUCHSCREEN_ATMEL_TSADCC
- tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
- help
- Say Y here if you have a 4-wire touchscreen connected to the
- ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called atmel_tsadcc.
-
-config TOUCHSCREEN_UCB1400
- tristate "Philips UCB1400 touchscreen"
- depends on AC97_BUS
- depends on UCB1400_CORE
- help
- This enables support for the Philips UCB1400 touchscreen interface.
- The UCB1400 is an AC97 audio codec. The touchscreen interface
- will be initialized only after the ALSA subsystem has been
- brought up and the UCB1400 detected. You therefore have to
- configure ALSA support as well (either built-in or modular,
- independently of whether this driver is itself built-in or
- modular) for this driver to work.
-
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_ts.
-
-config TOUCHSCREEN_WM97XX
- tristate "Support for WM97xx AC97 touchscreen controllers"
- depends on AC97_BUS
- help
- Say Y here if you have a Wolfson Microelectronics WM97xx
- touchscreen connected to your system. Note that this option
- only enables core driver, you will also need to select
- support for appropriate chip below.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called wm97xx-ts.
-
-config TOUCHSCREEN_WM9705
- bool "WM9705 Touchscreen interface support"
- depends on TOUCHSCREEN_WM97XX
- default y
- help
- Say Y here to enable support for the Wolfson Microelectronics
- WM9705 touchscreen controller.
-
-config TOUCHSCREEN_WM9712
- bool "WM9712 Touchscreen interface support"
- depends on TOUCHSCREEN_WM97XX
- default y
- help
- Say Y here to enable support for the Wolfson Microelectronics
- WM9712 touchscreen controller.
-
-config TOUCHSCREEN_WM9713
- bool "WM9713 Touchscreen interface support"
- depends on TOUCHSCREEN_WM97XX
- default y
- help
- Say Y here to enable support for the Wolfson Microelectronics
- WM9713 touchscreen controller.
-
-config TOUCHSCREEN_WM97XX_ATMEL
- tristate "WM97xx Atmel accelerated touch"
- depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
- help
- Say Y here for support for streaming mode with WM97xx touchscreens
- on Atmel AT91 or AVR32 systems with an AC97C module.
-
- Be aware that this will use channel B in the controller for
- streaming data, this must not conflict with other AC97C drivers.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the module will
- be called atmel-wm97xx.
-
-config TOUCHSCREEN_WM97XX_MAINSTONE
- tristate "WM97xx Mainstone/Palm accelerated touch"
- depends on TOUCHSCREEN_WM97XX && ARCH_PXA
- help
- Say Y here for support for streaming mode with WM97xx touchscreens
- on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called mainstone-wm97xx.
-
-config TOUCHSCREEN_WM97XX_ZYLONITE
- tristate "Zylonite accelerated touch"
- depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
- select TOUCHSCREEN_WM9713
- help
- Say Y here for support for streaming mode with the touchscreen
- on Zylonite systems.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called zylonite-wm97xx.
-
-config TOUCHSCREEN_USB_COMPOSITE
- tristate "USB Touchscreen Driver"
- depends on USB_ARCH_HAS_HCD
- select USB
- help
- USB Touchscreen driver for:
- - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
- - PanJit TouchSet USB
- - 3M MicroTouch USB (EX II series)
- - ITM
- - some other eTurboTouch
- - Gunze AHL61
- - DMC TSC-10/25
- - IRTOUCHSYSTEMS/UNITOP
- - IdealTEK URTC1000
- - GoTop Super_Q2/GogoPen/PenPower tablets
- - JASTEC USB Touch Controller/DigiTech DTR-02U
- - Zytronic controllers
-
- Have a look at <http://linux.chapter7.ch/touchkit/> for
- a usage description and the required user-space stuff.
-
- To compile this driver as a module, choose M here: the
- module will be called usbtouchscreen.
-
-config TOUCHSCREEN_MC13783
- tristate "Freescale MC13783 touchscreen input driver"
- depends on MFD_MC13783
- help
- Say Y here if you have an Freescale MC13783 PMIC on your
- board and want to use its touchscreen
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called mc13783_ts.
-
-config TOUCHSCREEN_USB_EGALAX
- default y
- bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_PANJIT
- default y
- bool "PanJit device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_3M
- default y
- bool "3M/Microtouch EX II series device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_ITM
- default y
- bool "ITM device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_ETURBO
- default y
- bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_GUNZE
- default y
- bool "Gunze AHL61 device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_DMC_TSC10
- default y
- bool "DMC TSC-10/25 device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_IRTOUCH
- default y
- bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_IDEALTEK
- default y
- bool "IdealTEK URTC1000 device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_GENERAL_TOUCH
- default y
- bool "GeneralTouch Touchscreen device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_GOTOP
- default y
- bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_JASTEC
- default y
- bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_E2I
- default y
- bool "e2i Touchscreen controller (e.g. from Mimo 740)"
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_ZYTRONIC
- default y
- bool "Zytronic controller" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_ETT_TC45USB
- default y
- bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_USB_NEXIO
- default y
- bool "NEXIO/iNexio device support" if EMBEDDED
- depends on TOUCHSCREEN_USB_COMPOSITE
-
-config TOUCHSCREEN_TOUCHIT213
- tristate "Sahara TouchIT-213 touchscreen"
- select SERIO
- help
- Say Y here if you have a Sahara TouchIT-213 Tablet PC.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called touchit213.
-
-config TOUCHSCREEN_TSC2007
- tristate "TSC2007 based touchscreens"
- depends on I2C
- help
- Say Y here if you have a TSC2007 based touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called tsc2007.
-
-config TOUCHSCREEN_TSC2004
- tristate "TSC2004 based touchscreens"
- depends on I2C
- help
- Say Y here if you have a TSC2004 based touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called tsc2004.
-
-config TOUCHSCREEN_W90X900
- tristate "W90P910 touchscreen driver"
- depends on HAVE_CLK
- help
- Say Y here if you have a W90P910 based touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called w90p910_ts.
-
-config TOUCHSCREEN_PCAP
- tristate "Motorola PCAP touchscreen"
- depends on EZX_PCAP
- help
- Say Y here if you have a Motorola EZX telephone and
- want to enable support for the built-in touchscreen.
-
- To compile this driver as a module, choose M here: the
- module will be called pcap_ts.
-
-config TOUCHSCREEN_TPS6507X
- tristate "TPS6507x based touchscreens"
- depends on I2C
- help
- Say Y here if you have a TPS6507x based touchscreen
- controller.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called tps6507x_ts.
-
-config TOUCHSCREEN_STMPE
- tristate "STMicroelectronics STMPE touchscreens"
- depends on MFD_STMPE
- help
- Say Y here if you want support for STMicroelectronics
- STMPE touchscreen controllers.
-
- To compile this driver as a module, choose M here: the
- module will be called stmpe-ts.
-
-endif
diff --git a/kernel/drivers/input/touchscreen/Makefile b/kernel/drivers/input/touchscreen/Makefile
deleted file mode 100644
index a6c7d9f..0000000
--- a/kernel/drivers/input/touchscreen/Makefile
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-# Makefile for the touchscreen drivers.
-#
-
-# Each configuration option enables a list of files.
-
-wm97xx-ts-y := wm97xx-core.o
-
-obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o
-obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
-obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
-obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o
-obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o
-obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
-obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
-obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
-obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
-obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
-obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
-obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
-obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
-obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
-obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
-obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
-obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
-obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
-obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
-obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
-obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
-obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
-obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
-obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
-obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
-obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
-obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
-obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
-obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
-obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o
-obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
-obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
-obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
-obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
-obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI4_DEV) += synaptics_rmi_dev.o
-obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE) += synaptics_fw_update.o
-obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
-obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
-obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
-obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
-obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o
-obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
-obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
-obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o
-wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o
-wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o
-wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
-obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
-obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
-obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
-obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
-obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
-
-all:
-make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
-
-clean:
-make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6e42cc2..1de24ac 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -913,12 +913,14 @@
* This array describes the order lists are fallen back to when
* the free lists for the desirable migrate type are depleted
*/
-static int fallbacks[MIGRATE_TYPES][3] = {
+static int fallbacks[MIGRATE_TYPES][4] = {
[MIGRATE_UNMOVABLE] = { MIGRATE_RECLAIMABLE, MIGRATE_MOVABLE, MIGRATE_RESERVE },
[MIGRATE_RECLAIMABLE] = { MIGRATE_UNMOVABLE, MIGRATE_MOVABLE, MIGRATE_RESERVE },
- [MIGRATE_MOVABLE] = { MIGRATE_RECLAIMABLE, MIGRATE_UNMOVABLE, MIGRATE_RESERVE },
#ifdef CONFIG_CMA
+ [MIGRATE_MOVABLE] = { MIGRATE_CMA, MIGRATE_RECLAIMABLE, MIGRATE_UNMOVABLE, MIGRATE_RESERVE },
[MIGRATE_CMA] = { MIGRATE_RESERVE }, /* Never used */
+#else
+ [MIGRATE_MOVABLE] = { MIGRATE_RECLAIMABLE, MIGRATE_UNMOVABLE, MIGRATE_RESERVE },
#endif
[MIGRATE_RESERVE] = { MIGRATE_RESERVE }, /* Never used */
[MIGRATE_ISOLATE] = { MIGRATE_RESERVE }, /* Never used */
@@ -1041,10 +1043,17 @@
* pages to the preferred allocation list. If falling
* back for a reclaimable kernel allocation, be more
* aggressive about taking ownership of free pages
+ *
+ * On the other hand, never change migration
+ * type of MIGRATE_CMA pageblocks nor move CMA
+ * pages on different free lists. We don't
+ * want unmovable pages to be allocated from
+ * MIGRATE_CMA areas.
*/
- if (unlikely(current_order >= pageblock_order / 2) ||
- start_migratetype == MIGRATE_RECLAIMABLE ||
- page_group_by_mobility_disabled) {
+ if (!is_migrate_cma(migratetype) &&
+ (unlikely(current_order >= pageblock_order / 2) ||
+ start_migratetype == MIGRATE_RECLAIMABLE ||
+ page_group_by_mobility_disabled)) {
int pages;
pages = move_freepages_block(zone, page,
start_migratetype);
@@ -1063,12 +1072,14 @@
rmv_page_order(page);
/* Take ownership for orders >= pageblock_order */
- if (current_order >= pageblock_order)
+ if (current_order >= pageblock_order &&
+ !is_migrate_cma(migratetype))
change_pageblock_range(page, current_order,
start_migratetype);
expand(zone, page, order, current_order, area,
- start_migratetype);
+ is_migrate_cma(migratetype)
+ ? migratetype : start_migratetype);
trace_mm_page_alloc_extfrag(page, order, current_order,
start_migratetype, migratetype);
@@ -1089,27 +1100,21 @@
{
struct page *page;
-#ifdef CONFIG_CMA
- if (migratetype == MIGRATE_MOVABLE)
- migratetype = MIGRATE_CMA;
-#endif
+retry_reserve:
+ page = __rmqueue_smallest(zone, order, migratetype);
- for(;;) {
- page = __rmqueue_smallest(zone, order, migratetype);
- if (likely(page) || migratetype == MIGRATE_RESERVE)
- break;
-
- if (is_migrate_cma(migratetype)) {
- migratetype = MIGRATE_MOVABLE;
- continue;
- }
-
+ if (unlikely(!page) && migratetype != MIGRATE_RESERVE) {
page = __rmqueue_fallback(zone, order, migratetype);
- if (page)
- break;
- /* Use MIGRATE_RESERVE rather than fail an allocation. */
- migratetype = MIGRATE_RESERVE;
+ /*
+ * Use MIGRATE_RESERVE rather than fail an allocation. goto
+ * is used because __rmqueue_smallest is an inline function
+ * and we want just one call site
+ */
+ if (!page) {
+ migratetype = MIGRATE_RESERVE;
+ goto retry_reserve;
+ }
}
trace_mm_page_alloc_zone_locked(page, order, migratetype);