| /* linux/arch/arm/mach-s3c2410/irq.c |
| * |
| * Copyright (c) 2003,2004 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Changelog: |
| * |
| * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk> |
| * Fixed compile warnings |
| * |
| * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn> |
| * Fixed s3c_extirq_type |
| * |
| * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> |
| * Addition of ADC/TC demux |
| * |
| * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de> |
| * Fix for set_irq_type() on low EINT numbers |
| * |
| * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> |
| * Tidy up KF's patch and sort out new release |
| * |
| * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk> |
| * Add support for power management controls |
| * |
| * 04-Nov-2004 Ben Dooks |
| * Fix standard IRQ wake for EINT0..4 and RTC |
| * |
| * 22-Feb-2005 Ben Dooks |
| * Fixed edge-triggering on ADC IRQ |
| * |
| * 28-Jun-2005 Ben Dooks |
| * Mark IRQ_LCD valid |
| * |
| * 25-Jul-2005 Ben Dooks |
| * Split the S3C2440 IRQ code to seperate file |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/ptrace.h> |
| #include <linux/sysdev.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| |
| #include <asm/mach/irq.h> |
| |
| #include <asm/arch/regs-irq.h> |
| #include <asm/arch/regs-gpio.h> |
| |
| #include "cpu.h" |
| #include "pm.h" |
| #include "irq.h" |
| |
| /* wakeup irq control */ |
| |
| #ifdef CONFIG_PM |
| |
| /* state for IRQs over sleep */ |
| |
| /* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources |
| * |
| * set bit to 1 in allow bitfield to enable the wakeup settings on it |
| */ |
| |
| unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; |
| unsigned long s3c_irqwake_intmask = 0xffffffffL; |
| unsigned long s3c_irqwake_eintallow = 0x0000fff0L; |
| unsigned long s3c_irqwake_eintmask = 0xffffffffL; |
| |
| int |
| s3c_irq_wake(unsigned int irqno, unsigned int state) |
| { |
| unsigned long irqbit = 1 << (irqno - IRQ_EINT0); |
| |
| if (!(s3c_irqwake_intallow & irqbit)) |
| return -ENOENT; |
| |
| printk(KERN_INFO "wake %s for irq %d\n", |
| state ? "enabled" : "disabled", irqno); |
| |
| if (!state) |
| s3c_irqwake_intmask |= irqbit; |
| else |
| s3c_irqwake_intmask &= ~irqbit; |
| |
| return 0; |
| } |
| |
| static int |
| s3c_irqext_wake(unsigned int irqno, unsigned int state) |
| { |
| unsigned long bit = 1L << (irqno - EXTINT_OFF); |
| |
| if (!(s3c_irqwake_eintallow & bit)) |
| return -ENOENT; |
| |
| printk(KERN_INFO "wake %s for irq %d\n", |
| state ? "enabled" : "disabled", irqno); |
| |
| if (!state) |
| s3c_irqwake_eintmask |= bit; |
| else |
| s3c_irqwake_eintmask &= ~bit; |
| |
| return 0; |
| } |
| |
| #else |
| #define s3c_irqext_wake NULL |
| #define s3c_irq_wake NULL |
| #endif |
| |
| |
| static void |
| s3c_irq_mask(unsigned int irqno) |
| { |
| unsigned long mask; |
| |
| irqno -= IRQ_EINT0; |
| |
| mask = __raw_readl(S3C2410_INTMSK); |
| mask |= 1UL << irqno; |
| __raw_writel(mask, S3C2410_INTMSK); |
| } |
| |
| static inline void |
| s3c_irq_ack(unsigned int irqno) |
| { |
| unsigned long bitval = 1UL << (irqno - IRQ_EINT0); |
| |
| __raw_writel(bitval, S3C2410_SRCPND); |
| __raw_writel(bitval, S3C2410_INTPND); |
| } |
| |
| static inline void |
| s3c_irq_maskack(unsigned int irqno) |
| { |
| unsigned long bitval = 1UL << (irqno - IRQ_EINT0); |
| unsigned long mask; |
| |
| mask = __raw_readl(S3C2410_INTMSK); |
| __raw_writel(mask|bitval, S3C2410_INTMSK); |
| |
| __raw_writel(bitval, S3C2410_SRCPND); |
| __raw_writel(bitval, S3C2410_INTPND); |
| } |
| |
| |
| static void |
| s3c_irq_unmask(unsigned int irqno) |
| { |
| unsigned long mask; |
| |
| if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) |
| irqdbf2("s3c_irq_unmask %d\n", irqno); |
| |
| irqno -= IRQ_EINT0; |
| |
| mask = __raw_readl(S3C2410_INTMSK); |
| mask &= ~(1UL << irqno); |
| __raw_writel(mask, S3C2410_INTMSK); |
| } |
| |
| struct irqchip s3c_irq_level_chip = { |
| .name = "s3c-level", |
| .ack = s3c_irq_maskack, |
| .mask = s3c_irq_mask, |
| .unmask = s3c_irq_unmask, |
| .set_wake = s3c_irq_wake |
| }; |
| |
| static struct irqchip s3c_irq_chip = { |
| .name = "s3c", |
| .ack = s3c_irq_ack, |
| .mask = s3c_irq_mask, |
| .unmask = s3c_irq_unmask, |
| .set_wake = s3c_irq_wake |
| }; |
| |
| static void |
| s3c_irqext_mask(unsigned int irqno) |
| { |
| unsigned long mask; |
| |
| irqno -= EXTINT_OFF; |
| |
| mask = __raw_readl(S3C24XX_EINTMASK); |
| mask |= ( 1UL << irqno); |
| __raw_writel(mask, S3C24XX_EINTMASK); |
| |
| if (irqno <= (IRQ_EINT7 - EXTINT_OFF)) { |
| /* check to see if all need masking */ |
| |
| if ((mask & (0xf << 4)) == (0xf << 4)) { |
| /* all masked, mask the parent */ |
| s3c_irq_mask(IRQ_EINT4t7); |
| } |
| } else { |
| /* todo: the same check as above for the rest of the irq regs...*/ |
| |
| } |
| } |
| |
| static void |
| s3c_irqext_ack(unsigned int irqno) |
| { |
| unsigned long req; |
| unsigned long bit; |
| unsigned long mask; |
| |
| bit = 1UL << (irqno - EXTINT_OFF); |
| |
| |
| mask = __raw_readl(S3C24XX_EINTMASK); |
| |
| __raw_writel(bit, S3C24XX_EINTPEND); |
| |
| req = __raw_readl(S3C24XX_EINTPEND); |
| req &= ~mask; |
| |
| /* not sure if we should be acking the parent irq... */ |
| |
| if (irqno <= IRQ_EINT7 ) { |
| if ((req & 0xf0) == 0) |
| s3c_irq_ack(IRQ_EINT4t7); |
| } else { |
| if ((req >> 8) == 0) |
| s3c_irq_ack(IRQ_EINT8t23); |
| } |
| } |
| |
| static void |
| s3c_irqext_unmask(unsigned int irqno) |
| { |
| unsigned long mask; |
| |
| irqno -= EXTINT_OFF; |
| |
| mask = __raw_readl(S3C24XX_EINTMASK); |
| mask &= ~( 1UL << irqno); |
| __raw_writel(mask, S3C24XX_EINTMASK); |
| |
| s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23); |
| } |
| |
| int |
| s3c_irqext_type(unsigned int irq, unsigned int type) |
| { |
| void __iomem *extint_reg; |
| void __iomem *gpcon_reg; |
| unsigned long gpcon_offset, extint_offset; |
| unsigned long newvalue = 0, value; |
| |
| if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3)) |
| { |
| gpcon_reg = S3C2410_GPFCON; |
| extint_reg = S3C24XX_EXTINT0; |
| gpcon_offset = (irq - IRQ_EINT0) * 2; |
| extint_offset = (irq - IRQ_EINT0) * 4; |
| } |
| else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7)) |
| { |
| gpcon_reg = S3C2410_GPFCON; |
| extint_reg = S3C24XX_EXTINT0; |
| gpcon_offset = (irq - (EXTINT_OFF)) * 2; |
| extint_offset = (irq - (EXTINT_OFF)) * 4; |
| } |
| else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15)) |
| { |
| gpcon_reg = S3C2410_GPGCON; |
| extint_reg = S3C24XX_EXTINT1; |
| gpcon_offset = (irq - IRQ_EINT8) * 2; |
| extint_offset = (irq - IRQ_EINT8) * 4; |
| } |
| else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23)) |
| { |
| gpcon_reg = S3C2410_GPGCON; |
| extint_reg = S3C24XX_EXTINT2; |
| gpcon_offset = (irq - IRQ_EINT8) * 2; |
| extint_offset = (irq - IRQ_EINT16) * 4; |
| } else |
| return -1; |
| |
| /* Set the GPIO to external interrupt mode */ |
| value = __raw_readl(gpcon_reg); |
| value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); |
| __raw_writel(value, gpcon_reg); |
| |
| /* Set the external interrupt to pointed trigger type */ |
| switch (type) |
| { |
| case IRQT_NOEDGE: |
| printk(KERN_WARNING "No edge setting!\n"); |
| break; |
| |
| case IRQT_RISING: |
| newvalue = S3C2410_EXTINT_RISEEDGE; |
| break; |
| |
| case IRQT_FALLING: |
| newvalue = S3C2410_EXTINT_FALLEDGE; |
| break; |
| |
| case IRQT_BOTHEDGE: |
| newvalue = S3C2410_EXTINT_BOTHEDGE; |
| break; |
| |
| case IRQT_LOW: |
| newvalue = S3C2410_EXTINT_LOWLEV; |
| break; |
| |
| case IRQT_HIGH: |
| newvalue = S3C2410_EXTINT_HILEV; |
| break; |
| |
| default: |
| printk(KERN_ERR "No such irq type %d", type); |
| return -1; |
| } |
| |
| value = __raw_readl(extint_reg); |
| value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); |
| __raw_writel(value, extint_reg); |
| |
| return 0; |
| } |
| |
| static struct irqchip s3c_irqext_chip = { |
| .name = "s3c-ext", |
| .mask = s3c_irqext_mask, |
| .unmask = s3c_irqext_unmask, |
| .ack = s3c_irqext_ack, |
| .set_type = s3c_irqext_type, |
| .set_wake = s3c_irqext_wake |
| }; |
| |
| static struct irqchip s3c_irq_eint0t4 = { |
| .name = "s3c-ext0", |
| .ack = s3c_irq_ack, |
| .mask = s3c_irq_mask, |
| .unmask = s3c_irq_unmask, |
| .set_wake = s3c_irq_wake, |
| .set_type = s3c_irqext_type, |
| }; |
| |
| /* mask values for the parent registers for each of the interrupt types */ |
| |
| #define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0)) |
| #define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) |
| #define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) |
| #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) |
| |
| |
| /* UART0 */ |
| |
| static void |
| s3c_irq_uart0_mask(unsigned int irqno) |
| { |
| s3c_irqsub_mask(irqno, INTMSK_UART0, 7); |
| } |
| |
| static void |
| s3c_irq_uart0_unmask(unsigned int irqno) |
| { |
| s3c_irqsub_unmask(irqno, INTMSK_UART0); |
| } |
| |
| static void |
| s3c_irq_uart0_ack(unsigned int irqno) |
| { |
| s3c_irqsub_maskack(irqno, INTMSK_UART0, 7); |
| } |
| |
| static struct irqchip s3c_irq_uart0 = { |
| .name = "s3c-uart0", |
| .mask = s3c_irq_uart0_mask, |
| .unmask = s3c_irq_uart0_unmask, |
| .ack = s3c_irq_uart0_ack, |
| }; |
| |
| /* UART1 */ |
| |
| static void |
| s3c_irq_uart1_mask(unsigned int irqno) |
| { |
| s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3); |
| } |
| |
| static void |
| s3c_irq_uart1_unmask(unsigned int irqno) |
| { |
| s3c_irqsub_unmask(irqno, INTMSK_UART1); |
| } |
| |
| static void |
| s3c_irq_uart1_ack(unsigned int irqno) |
| { |
| s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3); |
| } |
| |
| static struct irqchip s3c_irq_uart1 = { |
| .name = "s3c-uart1", |
| .mask = s3c_irq_uart1_mask, |
| .unmask = s3c_irq_uart1_unmask, |
| .ack = s3c_irq_uart1_ack, |
| }; |
| |
| /* UART2 */ |
| |
| static void |
| s3c_irq_uart2_mask(unsigned int irqno) |
| { |
| s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6); |
| } |
| |
| static void |
| s3c_irq_uart2_unmask(unsigned int irqno) |
| { |
| s3c_irqsub_unmask(irqno, INTMSK_UART2); |
| } |
| |
| static void |
| s3c_irq_uart2_ack(unsigned int irqno) |
| { |
| s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6); |
| } |
| |
| static struct irqchip s3c_irq_uart2 = { |
| .name = "s3c-uart2", |
| .mask = s3c_irq_uart2_mask, |
| .unmask = s3c_irq_uart2_unmask, |
| .ack = s3c_irq_uart2_ack, |
| }; |
| |
| /* ADC and Touchscreen */ |
| |
| static void |
| s3c_irq_adc_mask(unsigned int irqno) |
| { |
| s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9); |
| } |
| |
| static void |
| s3c_irq_adc_unmask(unsigned int irqno) |
| { |
| s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT); |
| } |
| |
| static void |
| s3c_irq_adc_ack(unsigned int irqno) |
| { |
| s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9); |
| } |
| |
| static struct irqchip s3c_irq_adc = { |
| .name = "s3c-adc", |
| .mask = s3c_irq_adc_mask, |
| .unmask = s3c_irq_adc_unmask, |
| .ack = s3c_irq_adc_ack, |
| }; |
| |
| /* irq demux for adc */ |
| static void s3c_irq_demux_adc(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| unsigned int subsrc, submsk; |
| unsigned int offset = 9; |
| struct irqdesc *mydesc; |
| |
| /* read the current pending interrupts, and the mask |
| * for what it is available */ |
| |
| subsrc = __raw_readl(S3C2410_SUBSRCPND); |
| submsk = __raw_readl(S3C2410_INTSUBMSK); |
| |
| subsrc &= ~submsk; |
| subsrc >>= offset; |
| subsrc &= 3; |
| |
| if (subsrc != 0) { |
| if (subsrc & 1) { |
| mydesc = irq_desc + IRQ_TC; |
| desc_handle_irq(IRQ_TC, mydesc, regs); |
| } |
| if (subsrc & 2) { |
| mydesc = irq_desc + IRQ_ADC; |
| desc_handle_irq(IRQ_ADC, mydesc, regs); |
| } |
| } |
| } |
| |
| static void s3c_irq_demux_uart(unsigned int start, |
| struct pt_regs *regs) |
| { |
| unsigned int subsrc, submsk; |
| unsigned int offset = start - IRQ_S3CUART_RX0; |
| struct irqdesc *desc; |
| |
| /* read the current pending interrupts, and the mask |
| * for what it is available */ |
| |
| subsrc = __raw_readl(S3C2410_SUBSRCPND); |
| submsk = __raw_readl(S3C2410_INTSUBMSK); |
| |
| irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n", |
| start, offset, subsrc, submsk); |
| |
| subsrc &= ~submsk; |
| subsrc >>= offset; |
| subsrc &= 7; |
| |
| if (subsrc != 0) { |
| desc = irq_desc + start; |
| |
| if (subsrc & 1) |
| desc_handle_irq(start, desc, regs); |
| |
| desc++; |
| |
| if (subsrc & 2) |
| desc_handle_irq(start+1, desc, regs); |
| |
| desc++; |
| |
| if (subsrc & 4) |
| desc_handle_irq(start+2, desc, regs); |
| } |
| } |
| |
| /* uart demux entry points */ |
| |
| static void |
| s3c_irq_demux_uart0(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| irq = irq; |
| s3c_irq_demux_uart(IRQ_S3CUART_RX0, regs); |
| } |
| |
| static void |
| s3c_irq_demux_uart1(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| irq = irq; |
| s3c_irq_demux_uart(IRQ_S3CUART_RX1, regs); |
| } |
| |
| static void |
| s3c_irq_demux_uart2(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| irq = irq; |
| s3c_irq_demux_uart(IRQ_S3CUART_RX2, regs); |
| } |
| |
| static void |
| s3c_irq_demux_extint8(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); |
| unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); |
| |
| eintpnd &= ~eintmsk; |
| eintpnd &= ~0xff; /* ignore lower irqs */ |
| |
| /* we may as well handle all the pending IRQs here */ |
| |
| while (eintpnd) { |
| irq = __ffs(eintpnd); |
| eintpnd &= ~(1<<irq); |
| |
| irq += (IRQ_EINT4 - 4); |
| desc_handle_irq(irq, irq_desc + irq, regs); |
| } |
| |
| } |
| |
| static void |
| s3c_irq_demux_extint4t7(unsigned int irq, |
| struct irqdesc *desc, |
| struct pt_regs *regs) |
| { |
| unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); |
| unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); |
| |
| eintpnd &= ~eintmsk; |
| eintpnd &= 0xff; /* only lower irqs */ |
| |
| /* we may as well handle all the pending IRQs here */ |
| |
| while (eintpnd) { |
| irq = __ffs(eintpnd); |
| eintpnd &= ~(1<<irq); |
| |
| irq += (IRQ_EINT4 - 4); |
| |
| desc_handle_irq(irq, irq_desc + irq, regs); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static struct sleep_save irq_save[] = { |
| SAVE_ITEM(S3C2410_INTMSK), |
| SAVE_ITEM(S3C2410_INTSUBMSK), |
| }; |
| |
| /* the extint values move between the s3c2410/s3c2440 and the s3c2412 |
| * so we use an array to hold them, and to calculate the address of |
| * the register at run-time |
| */ |
| |
| static unsigned long save_extint[3]; |
| static unsigned long save_eintflt[4]; |
| static unsigned long save_eintmask; |
| |
| int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(save_extint); i++) |
| save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); |
| |
| for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) |
| save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); |
| |
| s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); |
| save_eintmask = __raw_readl(S3C24XX_EINTMASK); |
| |
| return 0; |
| } |
| |
| int s3c24xx_irq_resume(struct sys_device *dev) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(save_extint); i++) |
| __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); |
| |
| for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) |
| __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); |
| |
| s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); |
| __raw_writel(save_eintmask, S3C24XX_EINTMASK); |
| |
| return 0; |
| } |
| |
| #else |
| #define s3c24xx_irq_suspend NULL |
| #define s3c24xx_irq_resume NULL |
| #endif |
| |
| /* s3c24xx_init_irq |
| * |
| * Initialise S3C2410 IRQ system |
| */ |
| |
| void __init s3c24xx_init_irq(void) |
| { |
| unsigned long pend; |
| unsigned long last; |
| int irqno; |
| int i; |
| |
| irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); |
| |
| /* first, clear all interrupts pending... */ |
| |
| last = 0; |
| for (i = 0; i < 4; i++) { |
| pend = __raw_readl(S3C24XX_EINTPEND); |
| |
| if (pend == 0 || pend == last) |
| break; |
| |
| __raw_writel(pend, S3C24XX_EINTPEND); |
| printk("irq: clearing pending ext status %08x\n", (int)pend); |
| last = pend; |
| } |
| |
| last = 0; |
| for (i = 0; i < 4; i++) { |
| pend = __raw_readl(S3C2410_INTPND); |
| |
| if (pend == 0 || pend == last) |
| break; |
| |
| __raw_writel(pend, S3C2410_SRCPND); |
| __raw_writel(pend, S3C2410_INTPND); |
| printk("irq: clearing pending status %08x\n", (int)pend); |
| last = pend; |
| } |
| |
| last = 0; |
| for (i = 0; i < 4; i++) { |
| pend = __raw_readl(S3C2410_SUBSRCPND); |
| |
| if (pend == 0 || pend == last) |
| break; |
| |
| printk("irq: clearing subpending status %08x\n", (int)pend); |
| __raw_writel(pend, S3C2410_SUBSRCPND); |
| last = pend; |
| } |
| |
| /* register the main interrupts */ |
| |
| irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); |
| |
| for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { |
| /* set all the s3c2410 internal irqs */ |
| |
| switch (irqno) { |
| /* deal with the special IRQs (cascaded) */ |
| |
| case IRQ_EINT4t7: |
| case IRQ_EINT8t23: |
| case IRQ_UART0: |
| case IRQ_UART1: |
| case IRQ_UART2: |
| case IRQ_ADCPARENT: |
| set_irq_chip(irqno, &s3c_irq_level_chip); |
| set_irq_handler(irqno, do_level_IRQ); |
| break; |
| |
| case IRQ_RESERVED6: |
| case IRQ_RESERVED24: |
| /* no IRQ here */ |
| break; |
| |
| default: |
| //irqdbf("registering irq %d (s3c irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_chip); |
| set_irq_handler(irqno, do_edge_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| } |
| |
| /* setup the cascade irq handlers */ |
| |
| set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); |
| set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); |
| |
| set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); |
| set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); |
| set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); |
| set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); |
| |
| /* external interrupts */ |
| |
| for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { |
| irqdbf("registering irq %d (ext int)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_eint0t4); |
| set_irq_handler(irqno, do_edge_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { |
| irqdbf("registering irq %d (extended s3c irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irqext_chip); |
| set_irq_handler(irqno, do_edge_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| /* register the uart interrupts */ |
| |
| irqdbf("s3c2410: registering external interrupts\n"); |
| |
| for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { |
| irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_uart0); |
| set_irq_handler(irqno, do_level_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { |
| irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_uart1); |
| set_irq_handler(irqno, do_level_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { |
| irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_uart2); |
| set_irq_handler(irqno, do_level_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { |
| irqdbf("registering irq %d (s3c adc irq)\n", irqno); |
| set_irq_chip(irqno, &s3c_irq_adc); |
| set_irq_handler(irqno, do_edge_IRQ); |
| set_irq_flags(irqno, IRQF_VALID); |
| } |
| |
| irqdbf("s3c2410: registered interrupt handlers\n"); |
| } |