Merge branches 'upstream' and 'upstream-fixes' into for-linus
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 1d77539..41ff8ae 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -47,6 +47,20 @@
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
- Control the bluetooth device. 1 means on, 0 means off.
+ Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
+
+What: /sys/devices/platform/asus_laptop/wimax
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wimax device. 1 means on, 0 means off.
+
+What: /sys/devices/platform/asus_laptop/wwan
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wwan (3G) device. 1 means on, 0 means off.
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
new file mode 100644
index 0000000..e4b5fef
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
@@ -0,0 +1,10 @@
+What: /sys/devices/platform/eeepc-wmi/cpufv
+Date: Oct 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Change CPU clock configuration (write-only).
+ There are three available clock configuration:
+ * 0 -> Super Performance Mode
+ * 1 -> High Performance Mode
+ * 2 -> Power Saving Mode
diff --git a/Makefile b/Makefile
index 9e3c890..3d94974 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index db524e7..f1d9297 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,7 +9,7 @@
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4..4d26f2c 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -70,12 +70,7 @@
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
$(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 8b0de41..78b5080 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -73,6 +73,8 @@
.size _start, . - _start
+ .align
+
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 9be21ba..7193884 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -125,9 +125,13 @@
* sort out different calling conventions
*/
.align
+ .arm @ Always enter in ARM state
start:
.type start,#function
- .rept 8
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
+ THUMB( .rept 6 )
+ ARM( .rept 8 )
mov r0, r0
.endr
@@ -135,6 +139,7 @@
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
+ THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
@@ -174,7 +179,8 @@
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
- and r4, pc, #0xf8000000
+ mov r4, pc
+ and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
@@ -445,7 +451,8 @@
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
- mov r2, pc, lsr #20
+ mov r2, pc
+ mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 772f95f..e6388dc 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -146,9 +146,15 @@
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
+ struct irq_desc *desc;
spin_lock(&irq_controller_lock);
- irq_desc[irq].node = cpu;
+ desc = irq_to_desc(irq);
+ if (desc == NULL) {
+ spin_unlock(&irq_controller_lock);
+ return -EINVAL;
+ }
+ desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
@@ -210,7 +216,7 @@
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
- unsigned int max_irq, i;
+ unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
@@ -226,47 +232,49 @@
/*
* Find out how many interrupts are supported.
- */
- max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
- max_irq = (max_irq + 1) * 32;
-
- /*
* The GIC only supports up to 1020 interrupt sources.
- * Limit this to either the architected maximum, or the
- * platform maximum.
*/
- if (max_irq > max(1020, NR_IRQS))
- max_irq = max(1020, NR_IRQS);
+ gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
- for (i = 32; i < max_irq; i += 16)
+ for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
- for (i = 32; i < max_irq; i += 32)
+ for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
+ * Limit number of interrupts registered to the platform maximum
+ */
+ irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
+ if (WARN_ON(irq_limit > NR_IRQS))
+ irq_limit = NR_IRQS;
+
+ /*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+ for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index c09e357..bb96a7d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -911,7 +911,7 @@
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
- ldr r7, =1f @ it's 20 bits
+ ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index dd6b369..6bd82d2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -85,9 +85,11 @@
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
@@ -262,6 +264,7 @@
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
+ .align
__enable_mmu_loc:
.long .
.long __enable_mmu
@@ -282,6 +285,7 @@
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
@@ -308,6 +312,8 @@
b secondary_start_kernel
ENDPROC(__secondary_switched)
+ .align
+
.type __secondary_data, %object
__secondary_data:
.long .
@@ -413,6 +419,7 @@
mov pc, lr
ENDPROC(__fixup_smp)
+ .align
1: .word .
.word __smpalt_begin
.word __smpalt_end
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index fd26f8d..9cf4cbf 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -59,6 +59,8 @@
ldr r2,kexec_boot_atags
mov pc,lr
+ .align
+
.globl kexec_start_address
kexec_start_address:
.long 0x0
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 38088c3..78defd7 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -369,7 +369,7 @@
{
int i;
- hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+ hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
index 4075473..b34be45 100644
--- a/arch/arm/mach-realview/headsmp.S
+++ b/arch/arm/mach-realview/headsmp.S
@@ -35,5 +35,6 @@
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index cef6a65..fa2e5bf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,7 @@
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 87b9c9f..27b3e7c 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -35,9 +35,12 @@
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
+ select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ff024a6..a0cb258 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -18,6 +18,7 @@
config CPU_S3C2442
bool
select CPU_ARM920T
+ select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
@@ -178,6 +179,9 @@
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d50f3ae..f7663f7 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -46,9 +46,6 @@
{
printk("S3C2440: Initialising architecture\n");
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
@@ -58,3 +55,11 @@
return sysdev_register(&s3c2440_sysdev);
}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 188ad1e..ecf8135 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -43,6 +44,11 @@
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
/* S3C2442 extended clock support */
@@ -163,3 +169,11 @@
return sysdev_register(&s3c2442_sysdev);
}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4fef723..31babec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -5,6 +5,7 @@
config CPU_S3C2443
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 8ea3bff..a0e7c12 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,8 +21,8 @@
#include <mach/io.h>
.macro addruart, rp, rv
- ldreq \rp, =IO_APB_PHYS @ physical
- ldrne \rv, =IO_APB_VIRT @ virtual
+ ldr \rp, =IO_APB_PHYS @ physical
+ ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S
index 8a78ff6..7a3f063 100644
--- a/arch/arm/mach-vexpress/headsmp.S
+++ b/arch/arm/mach-vexpress/headsmp.S
@@ -35,5 +35,6 @@
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 53cbe22..9b9ff5d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -381,7 +381,7 @@
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_ca9mp_setup
+ W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
@@ -413,7 +413,7 @@
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_setup
+ W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 85d3e55..558cdfa 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,6 +18,7 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@@ -36,7 +37,7 @@
/*
* IOP clocksource (free-running timer 1).
*/
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 76d0858..4a10c0f 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -88,7 +88,7 @@
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
@@ -97,7 +97,7 @@
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
@@ -106,7 +106,7 @@
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
@@ -115,7 +115,7 @@
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 24c6f5a..243b641 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,8 +82,6 @@
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_1up,
- .get_pull = s3c_gpio_getpull_1up,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 307248d..89e8d0a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -21,17 +21,22 @@
#else
#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
#else
#define s3c2440_init NULL
+#define s3c2440_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
#else
#define s3c2442_init NULL
+#define s3c2442_map_io NULL
#endif
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index b732b77..0aa32f2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -280,18 +280,17 @@
}
#endif
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull,
+ s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
- pup = __raw_readl(reg);
-
- if (pup == S3C_GPIO_PULL_UP)
+ if (pull == updown)
pup &= ~(1 << off);
- else if (pup == S3C_GPIO_PULL_NONE)
+ else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
@@ -300,17 +299,45 @@
return 0;
}
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 8fd65d8..0d2c570 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -210,6 +210,17 @@
unsigned int off);
/**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+/**
* s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index d66cead..9897dcf 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -206,6 +206,7 @@
mov pc, lr
ENDPROC(vfp_save_state)
+ .align
last_VFP_context_address:
.word last_VFP_context
diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h
new file mode 100644
index 0000000..b44b0bb
--- /dev/null
+++ b/arch/mn10300/include/asm/syscall.h
@@ -0,0 +1,117 @@
+/* Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->d0;
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->d0 = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ *args++ = regs->a0;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->d1;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->a3;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->a2;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->d3;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->d2;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ regs->a0 = *args++;
+ case 1:
+ if (!n--) break;
+ regs->d1 = *args++;
+ case 2:
+ if (!n--) break;
+ regs->a3 = *args++;
+ case 3:
+ if (!n--) break;
+ regs->a2 = *args++;
+ case 4:
+ if (!n--) break;
+ regs->d3 = *args++;
+ case 5:
+ if (!n--) break;
+ regs->d2 = *args++;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+#endif /* _ASM_SYSCALL_H */
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 0d5d63c..f28dc99 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -73,7 +73,8 @@
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index 97dfda2..abdeea1 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -87,7 +87,8 @@
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index a5fc3f0..b169d99 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -1194,7 +1194,8 @@
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 5024f64..d7d94b8 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -75,9 +75,6 @@
smp_send_all_nop();
}
-void no_ack_irq(unsigned int irq) { }
-void no_end_irq(unsigned int irq) { }
-
void cpu_ack_irq(unsigned int irq)
{
unsigned long mask = EIEM_MASK(irq);
@@ -241,7 +238,7 @@
/* for iosapic interrupts */
if (type) {
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_percpu_irq);
set_irq_chip_data(irq, data);
cpu_unmask_irq(irq);
}
@@ -392,7 +389,7 @@
int i;
for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
set_irq_chip_and_handler(i, &cpu_interrupt_type,
- handle_level_irq);
+ handle_percpu_irq);
}
set_irq_handler(TIMER_IRQ, handle_percpu_irq);
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 35c827e..609a331 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -98,7 +98,6 @@
sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
{
struct rt_sigframe __user *frame;
- struct siginfo si;
sigset_t set;
unsigned long usp = (regs->gr[30] & ~(0x01UL));
unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
@@ -178,13 +177,7 @@
give_sigsegv:
DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = task_pid_vnr(current);
- si.si_uid = current_uid();
- si.si_addr = &frame->uc;
- force_sig_info(SIGSEGV, &si, current);
+ force_sig(SIGSEGV, current);
return;
}
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 56c8687..7eff9b7 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -19,6 +19,7 @@
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/posix-timers.h>
+#include <linux/cpu.h>
#include <asm/s390_ext.h>
#include <asm/timer.h>
@@ -566,6 +567,23 @@
__ctl_set_bit(0,10);
}
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct s390_idle_data *idle;
+ long cpu = (long) hcpu;
+
+ idle = &per_cpu(s390_idle, cpu);
+ switch (action) {
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ idle->nohz_delay = 0;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
void __init vtime_init(void)
{
/* request the cpu timer external interrupt */
@@ -574,5 +592,6 @@
/* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
+ cpu_notifier(s390_nohz_notify, 0);
}
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 2eaeb9e..f48c492 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -720,32 +720,6 @@
};
/* FSI */
-/*
- * FSI-B use external clock which came from da7210.
- * So, we should change parent of fsi
- */
-#define FCLKBCR 0xa415000c
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
-
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimckb_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKBCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
@@ -1264,10 +1238,10 @@
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
- clk_register(&fsimckb_clk);
- clk_set_parent(clk, &fsimckb_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimckb_clk, 11000);
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimckb_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimckb_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c31d228..527a0cd 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,31 +283,6 @@
};
/* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR 0xa4150008
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKACR,
- .rate = 0, /* unknown */
-};
-
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
@@ -852,37 +827,29 @@
gpio_request(GPIO_FN_KEYOUT0, NULL);
/* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
gpio_request(GPIO_FN_FSIOASD, NULL);
gpio_request(GPIO_FN_FSIIABCK, NULL);
gpio_request(GPIO_FN_FSIIALRCK, NULL);
gpio_request(GPIO_FN_FSIOABCK, NULL);
gpio_request(GPIO_FN_FSIOALRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
/* set SPU2 clock to 83.4 MHz */
clk = clk_get(NULL, "spu_clk");
- if (clk) {
+ if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 83333333));
clk_put(clk);
}
/* change parent of FSI A */
clk = clk_get(NULL, "fsia_clk");
- if (clk) {
- clk_register(&fsimcka_clk);
- clk_set_parent(clk, &fsimcka_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimcka_clk, 11000);
+ if (!IS_ERR(clk)) {
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimcka_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimcka_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 1f4e562..82e1eab 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -96,7 +96,7 @@
void *kmap_coherent(struct page *page, unsigned long addr);
void kunmap_coherent(void *kvaddr);
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
void cpu_cache_init(void);
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 4c27b68..7eb4359 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -303,4 +303,7 @@
SHDMA_SLAVE_SDHI1_RX,
};
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+
#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 0fe2e93..271c0b32 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -111,12 +111,21 @@
.parent = &pll_clk,
};
+/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
&pll_clk,
&div3_clk,
+ &sh7724_fsimcka_clk,
+ &sh7724_fsimckb_clk,
};
static void div4_kick(struct clk *clk)
@@ -154,16 +163,38 @@
[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
-enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
- [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
- [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
+enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *fclkacr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimcka_clk,
+ [3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimckb_clk,
+ [3] = NULL,
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+ fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+ [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+ fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
static struct clk mstp_clks[HWBLK_NR] = {
SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
@@ -240,8 +271,8 @@
/* DIV6 clocks */
CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
@@ -376,6 +407,9 @@
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
+ if (!ret)
ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
return ret;
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 2cfae81..92eb986 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -114,7 +114,7 @@
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
#endif
flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
@@ -239,7 +239,7 @@
* another ASID than the current one.
*/
map_coherent = (current_cpu_data.dcache.n_aliases &&
- !test_bit(PG_dcache_dirty, &page->flags) &&
+ test_bit(PG_dcache_clean, &page->flags) &&
page_mapped(page));
if (map_coherent)
vaddr = kmap_coherent(page, address);
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f498da1..7729cca 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -139,7 +139,7 @@
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
__flush_dcache_page(__pa(page_address(page)));
}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index ba401d1..88d3dc3 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -60,14 +60,14 @@
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent(vto);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
if (vma->vm_flags & VM_EXEC)
@@ -79,14 +79,14 @@
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
kunmap_coherent(vfrom);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
}
@@ -98,7 +98,7 @@
vto = kmap_atomic(to, KM_USER1);
if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
- !test_bit(PG_dcache_dirty, &from->flags)) {
+ test_bit(PG_dcache_clean, &from->flags)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent(vfrom);
@@ -141,7 +141,7 @@
page = pfn_to_page(pfn);
if (pfn_valid(pfn)) {
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+ int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
if (dirty)
__flush_purge_region(page_address(page), PAGE_SIZE);
}
@@ -153,7 +153,7 @@
if (pages_do_alias(addr, vmaddr)) {
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *kaddr;
kaddr = kmap_coherent(page, vmaddr);
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 15d74ea..ec29e14 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -34,7 +34,7 @@
enum fixed_addresses idx;
unsigned long vaddr;
- BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+ BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
pagefault_disable();
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 7f7e577..31d84ac 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -11,6 +11,7 @@
void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
struct pvclock_vcpu_time_info *vcpu,
struct timespec *ts);
+void pvclock_resume(void);
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 008b91e..42eb330 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -83,6 +83,11 @@
static atomic64_t last_value = ATOMIC64_INIT(0);
+void pvclock_resume(void)
+{
+ atomic64_set(&last_value, 0);
+}
+
cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
{
struct pvclock_shadow_time shadow;
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index d7b5109..25cd4a0 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -70,6 +70,9 @@
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
+#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
+ MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
+
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
struct msi_msg *msg)
{
@@ -83,12 +86,7 @@
MSI_ADDR_REDIRECTION_CPU |
MSI_ADDR_DEST_ID(pirq);
- msg->data =
- MSI_DATA_TRIGGER_EDGE |
- MSI_DATA_LEVEL_ASSERT |
- /* delivery mode reserved */
- (3 << 8) |
- MSI_DATA_VECTOR(0);
+ msg->data = XEN_PIRQ_MSI_DATA;
}
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
@@ -98,8 +96,23 @@
struct msi_msg msg;
list_for_each_entry(msidesc, &dev->msi_list, list) {
+ __read_msi_msg(msidesc, &msg);
+ pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
+ ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
+ if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) {
+ xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
+ "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ);
+ if (irq < 0)
+ goto error;
+ ret = set_irq_msi(irq, msidesc);
+ if (ret < 0)
+ goto error_while;
+ printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d"
+ " pirq=%d\n", irq, pirq);
+ return 0;
+ }
xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi", &irq, &pirq);
+ "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ));
if (irq < 0 || pirq < 0)
goto error;
printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 02c710b..44dcad4 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1021,10 +1021,6 @@
{
struct sched_shutdown r = { .reason = reason };
-#ifdef CONFIG_SMP
- stop_other_cpus();
-#endif
-
if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
BUG();
}
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index 0f45638..25c52f9 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -68,7 +68,7 @@
return 0;
}
-void __init xen_unplug_emulated_devices(void)
+void xen_unplug_emulated_devices(void)
{
int r;
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 01afd8a..b5a7f92 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -181,24 +181,21 @@
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end = map[i].addr + map[i].size;
- if (map[i].type == E820_RAM) {
- if (map[i].addr < mem_end && end > mem_end) {
- /* Truncate region to max_mem. */
- u64 delta = end - mem_end;
+ if (map[i].type == E820_RAM && end > mem_end) {
+ /* RAM off the end - may be partially included */
+ u64 delta = min(map[i].size, end - mem_end);
- map[i].size -= delta;
- extra_pages += PFN_DOWN(delta);
+ map[i].size -= delta;
+ end -= delta;
- end = mem_end;
- }
+ extra_pages += PFN_DOWN(delta);
}
- if (end > xen_extra_mem_start)
+ if (map[i].size > 0 && end > xen_extra_mem_start)
xen_extra_mem_start = end;
- /* If region is non-RAM or below mem_end, add what remains */
- if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
- map[i].size > 0)
+ /* Add region if any remains */
+ if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
@@ -252,20 +249,6 @@
return "Xen";
}
-static void xen_idle(void)
-{
- local_irq_disable();
-
- if (need_resched())
- local_irq_enable();
- else {
- current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
- }
-}
-
/*
* Set the bit indicating "nosegneg" library variants should be used.
* We only need to bother in pure 32-bit mode; compat 32-bit processes
@@ -362,7 +345,11 @@
MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
- pm_idle = xen_idle;
+ /* Set up idle, making sure it calls safe_halt() pvop */
+#ifdef CONFIG_X86_32
+ boot_cpu_data.hlt_works_ok = 1;
+#endif
+ pm_idle = default_idle;
fiddle_vdso();
}
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 1d789d5..9bbd63a 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -31,6 +31,7 @@
int cpu;
xen_hvm_init_shared_info();
xen_callback_vector();
+ xen_unplug_emulated_devices();
if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
for_each_online_cpu(cpu) {
xen_setup_runstate_info(cpu);
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index b2bb5aa..5da5e53 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -426,6 +426,8 @@
{
int cpu;
+ pvclock_resume();
+
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 6404474..9d41bf9 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -43,7 +43,7 @@
void xen_callback_vector(void);
void xen_hvm_init_shared_info(void);
-void __init xen_unplug_emulated_devices(void);
+void xen_unplug_emulated_devices(void);
void __init xen_build_dynamic_phys_to_machine(void);
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9272c38..16a2847 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -812,8 +812,10 @@
static void i830_cleanup(void)
{
- kunmap(intel_private.i8xx_page);
- intel_private.i8xx_flush_page = NULL;
+ if (intel_private.i8xx_flush_page) {
+ kunmap(intel_private.i8xx_flush_page);
+ intel_private.i8xx_flush_page = NULL;
+ }
__free_page(intel_private.i8xx_page);
intel_private.i8xx_page = NULL;
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index eb6b54d..85ffd5e 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -1213,3 +1213,4 @@
MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 7ca5935..bede10a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -241,7 +241,7 @@
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (!drm_helper_encoder_in_use(encoder)) {
+ if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) {
drm_encoder_disable(encoder);
/* disconnector encoder from any connector */
encoder->crtc = NULL;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 9d3a503..722700d 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -585,10 +585,13 @@
struct timeval now;
unsigned long flags;
unsigned int seq;
+ int ret;
e = kzalloc(sizeof *e, GFP_KERNEL);
- if (e == NULL)
- return -ENOMEM;
+ if (e == NULL) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
e->pipe = pipe;
e->base.pid = current->pid;
@@ -603,9 +606,8 @@
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof e->event) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(e);
- return -ENOMEM;
+ ret = -EBUSY;
+ goto err_unlock;
}
file_priv->event_space -= sizeof e->event;
@@ -638,6 +640,13 @@
spin_unlock_irqrestore(&dev->event_lock, flags);
return 0;
+
+err_unlock:
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+err_put:
+ drm_vblank_put(dev, e->pipe);
+ return ret;
}
/**
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 7a26f4dd..e680081 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -767,6 +767,9 @@
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5e54821..275ec6e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4374,10 +4374,20 @@
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
- if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+ if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
i915_gem_flush_ring(dev, file_priv,
obj_priv->ring,
0, obj->write_domain);
+ } else if (obj_priv->ring->outstanding_lazy_request) {
+ /* This ring is not being cleared by active usage,
+ * so emit a request to do so.
+ */
+ u32 seqno = i915_add_request(dev,
+ NULL, NULL,
+ obj_priv->ring);
+ if (seqno == 0)
+ ret = -ENOMEM;
+ }
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 25ed911..878fc76 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3033,6 +3033,7 @@
#define TRANS_DP_10BPC (1<<9)
#define TRANS_DP_6BPC (2<<9)
#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_BPC_MASK (3<<9)
#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
#define TRANS_DP_VSYNC_ACTIVE_LOW 0
#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index 65c88f9..2cb8e0b 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -190,37 +190,6 @@
kfree(output.pointer);
}
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
- return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
- enum vga_switcheroo_state state)
-{
- return 0;
-}
-
-static int intel_dsm_init(void)
-{
- return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
- if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
- return VGA_SWITCHEROO_IGD;
- else
- return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
- .switchto = intel_dsm_switchto,
- .power_state = intel_dsm_power_state,
- .init = intel_dsm_init,
- .get_client_id = intel_dsm_get_client_id,
-};
-
static bool intel_dsm_pci_probe(struct pci_dev *pdev)
{
acpi_handle dhandle, intel_handle;
@@ -276,11 +245,8 @@
{
if (!intel_dsm_detect())
return;
-
- vga_switcheroo_register_handler(&intel_dsm_handler);
}
void intel_unregister_dsm_handler(void)
{
- vga_switcheroo_unregister_handler();
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 255b52e..d9b7092 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2120,9 +2120,11 @@
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
temp |= (TRANS_DP_OUTPUT_ENABLE |
TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_8BPC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
@@ -2712,27 +2714,19 @@
}
}
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
int link_clock, struct fdi_m_n *m_n)
{
- u64 temp;
-
m_n->tu = 64; /* default size */
- temp = (u64) DATA_N * pixel_clock;
- temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
- m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
- m_n->gmch_n = DATA_N;
+ /* BUG_ON(pixel_clock > INT_MAX / 36); */
+ m_n->gmch_m = bits_per_pixel * pixel_clock;
+ m_n->gmch_n = link_clock * nlanes * 8;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- temp = (u64) LINK_N * pixel_clock;
- m_n->link_m = div_u64(temp, link_clock);
- m_n->link_n = LINK_N;
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
@@ -3716,6 +3710,7 @@
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
@@ -3799,6 +3794,8 @@
intel_crtc->fdi_lanes = lane;
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
@@ -5236,6 +5233,55 @@
.page_flip = intel_crtc_page_flip,
};
+static void intel_sanitize_modesetting(struct drm_device *dev,
+ int pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg, val;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ /* Who knows what state these registers were left in by the BIOS or
+ * grub?
+ *
+ * If we leave the registers in a conflicting state (e.g. with the
+ * display plane reading from the other pipe than the one we intend
+ * to use) then when we attempt to teardown the active mode, we will
+ * not disable the pipes and planes in the correct order -- leaving
+ * a plane reading from a disabled pipe and possibly leading to
+ * undefined behaviour.
+ */
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+
+ if ((val & DISPLAY_PLANE_ENABLE) == 0)
+ return;
+ if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+ return;
+
+ /* This display plane is active and attached to the other CPU pipe. */
+ pipe = !pipe;
+
+ /* Disable the plane and wait for it to stop reading from the pipe. */
+ I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev, plane);
+
+ if (IS_GEN2(dev))
+ intel_wait_for_vblank(dev, pipe);
+
+ if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Switch off the pipe. */
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ if (val & PIPECONF_ENABLE) {
+ I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+ intel_wait_for_pipe_off(dev, pipe);
+ }
+}
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
@@ -5287,6 +5333,8 @@
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
+
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 300f64b..df648cb 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1376,6 +1376,9 @@
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
+ if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ return;
+
DRM_DEBUG_KMS("\n");
if (is_edp(intel_dp)) {
@@ -1398,6 +1401,28 @@
if (is_edp(intel_dp))
DP |= DP_LINK_TRAIN_OFF;
+
+ if (!HAS_PCH_CPT(dev) &&
+ I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ /* Hardware workaround: leaving our transcoder select
+ * set to transcoder B while it's off will prevent the
+ * corresponding HDMI output on transcoder A.
+ *
+ * Combine this with another hardware workaround:
+ * transcoder select bit can only be cleared while the
+ * port is enabled.
+ */
+ DP &= ~DP_PIPEB_SELECT;
+ I915_WRITE(intel_dp->output_reg, DP);
+
+ /* Changes to enable or select take place the vblank
+ * after being written.
+ */
+ intel_wait_for_vblank(intel_dp->base.base.dev,
+ intel_crtc->pipe);
+ }
+
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f79327f..25bcedf 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -68,7 +68,7 @@
/**
* Sets the power state for the panel.
*/
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -82,26 +82,61 @@
lvds_reg = LVDS;
}
- if (on) {
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
- } else {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- intel_panel_set_backlight(dev, 0);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
-
- if (intel_lvds->pfit_control) {
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(PFIT_CONTROL, 0);
- intel_lvds->pfit_control = 0;
+ if (intel_lvds->pfit_dirty) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ intel_lvds->pfit_control,
+ intel_lvds->pfit_pgm_ratios);
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+ DRM_ERROR("timed out waiting for panel to power off\n");
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
-
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
}
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ POSTING_READ(lvds_reg);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+ struct drm_device *dev = intel_lvds->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 ctl_reg, lvds_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ intel_panel_set_backlight(dev, 0);
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+ if (intel_lvds->pfit_control) {
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+ DRM_ERROR("timed out waiting for panel to power off\n");
+
+ I915_WRITE(PFIT_CONTROL, 0);
+ intel_lvds->pfit_dirty = true;
+ }
+
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
@@ -110,9 +145,9 @@
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
if (mode == DRM_MODE_DPMS_ON)
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
else
- intel_lvds_set_power(intel_lvds, false);
+ intel_lvds_disable(intel_lvds);
/* XXX: We never power down the LVDS pairs. */
}
@@ -411,43 +446,18 @@
/* Always do a full power on as we do not know what state
* we were left in.
*/
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!intel_lvds->pfit_dirty)
- return;
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- intel_lvds->pfit_control,
- intel_lvds->pfit_pgm_ratios);
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
-
- I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
- intel_lvds->pfit_dirty = false;
}
/**
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index b83306f..89a65be 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -156,23 +156,25 @@
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
- DRM_ERROR("%s head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ DRM_DEBUG_KMS("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
- DRM_ERROR("%s head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ DRM_ERROR("failed to set %s head to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
+ }
}
I915_WRITE_CTL(ring,
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index a355259..a322d4f 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1195,8 +1195,10 @@
mc->vram_end, mc->real_vram_size >> 20);
} else {
u64 base = 0;
- if (rdev->flags & RADEON_IS_IGP)
- base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+ if (rdev->flags & RADEON_IS_IGP) {
+ base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+ base <<= 24;
+ }
radeon_vram_location(rdev, &rdev->mc, base);
rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index d8ac184..e12e793 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -286,7 +286,7 @@
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+ dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
}
@@ -323,7 +323,7 @@
mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
- dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+ dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
}
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 1d06774..a598d00 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+ rbo->placement.lpfn = 0;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
@@ -91,7 +91,8 @@
{
struct radeon_bo *bo;
enum ttm_bo_type type;
- int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long max_size = 0;
int r;
if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
@@ -104,6 +105,14 @@
}
*bo_ptr = NULL;
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if ((page_align << PAGE_SHIFT) >= max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+ __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
+ return -ENOMEM;
+ }
+
retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 3052e29..3d9a95f 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -150,6 +150,16 @@
Say Y here if you want to enable force feedback support for DragonRise Inc.
game controllers.
+config HID_EMS_FF
+ tristate "EMS Production Inc. force feedback support"
+ depends on USB_HID
+ select INPUT_FF_MEMLESS
+ ---help---
+ Say Y here if you want to enable force feedback support for devices by
+ EMS Production Ltd.
+ Currently the following devices are known to be supported:
+ - Trio Linker Plus II
+
config HID_EGALAX
tristate "eGalax multi-touch panel"
depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index c335605..b406269 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the HID driver
#
-hid-objs := hid-core.o hid-input.o
+hid-y := hid-core.o hid-input.o
ifdef CONFIG_DEBUG_FS
hid-objs += hid-debug.o
@@ -11,18 +11,18 @@
hid-$(CONFIG_HIDRAW) += hidraw.o
-hid-logitech-objs := hid-lg.o
+hid-logitech-y := hid-lg.o
ifdef CONFIG_LOGITECH_FF
- hid-logitech-objs += hid-lgff.o
+ hid-logitech-y += hid-lgff.o
endif
ifdef CONFIG_LOGIRUMBLEPAD2_FF
- hid-logitech-objs += hid-lg2ff.o
+ hid-logitech-y += hid-lg2ff.o
endif
ifdef CONFIG_LOGIG940_FF
- hid-logitech-objs += hid-lg3ff.o
+ hid-logitech-y += hid-lg3ff.o
endif
ifdef CONFIG_LOGIWII_FF
- hid-logitech-objs += hid-lg4ff.o
+ hid-logitech-y += hid-lg4ff.o
endif
obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
@@ -35,6 +35,7 @@
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o
+obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_EGALAX) += hid-egalax.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
index 02d8cd3..4546c12 100644
--- a/drivers/hid/hid-3m-pct.c
+++ b/drivers/hid/hid-3m-pct.c
@@ -274,7 +274,7 @@
md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
if (!md) {
- dev_err(&hdev->dev, "cannot allocate 3M data\n");
+ hid_err(hdev, "cannot allocate 3M data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, md);
diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c
index 1666c16..902d1df 100644
--- a/drivers/hid/hid-a4tech.c
+++ b/drivers/hid/hid-a4tech.c
@@ -93,7 +93,7 @@
a4 = kzalloc(sizeof(*a4), GFP_KERNEL);
if (a4 == NULL) {
- dev_err(&hdev->dev, "can't alloc device descriptor\n");
+ hid_err(hdev, "can't alloc device descriptor\n");
ret = -ENOMEM;
goto err_free;
}
@@ -104,13 +104,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index eaeca56..61aa712 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -16,6 +16,8 @@
* any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
@@ -59,6 +61,27 @@
u8 flags;
};
+static const struct apple_key_translation macbookair_fn_keys[] = {
+ { KEY_BACKSPACE, KEY_DELETE },
+ { KEY_ENTER, KEY_INSERT },
+ { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
+ { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY },
+ { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY },
+ { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY },
+ { KEY_F6, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY },
+ { KEY_F7, KEY_PLAYPAUSE, APPLE_FLAG_FKEY },
+ { KEY_F8, KEY_NEXTSONG, APPLE_FLAG_FKEY },
+ { KEY_F9, KEY_MUTE, APPLE_FLAG_FKEY },
+ { KEY_F10, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY },
+ { KEY_F11, KEY_VOLUMEUP, APPLE_FLAG_FKEY },
+ { KEY_F12, KEY_EJECTCD, APPLE_FLAG_FKEY },
+ { KEY_UP, KEY_PAGEUP },
+ { KEY_DOWN, KEY_PAGEDOWN },
+ { KEY_LEFT, KEY_HOME },
+ { KEY_RIGHT, KEY_END },
+ { }
+};
+
static const struct apple_key_translation apple_fn_keys[] = {
{ KEY_BACKSPACE, KEY_DELETE },
{ KEY_ENTER, KEY_INSERT },
@@ -146,7 +169,7 @@
struct hid_usage *usage, __s32 value)
{
struct apple_sc *asc = hid_get_drvdata(hid);
- const struct apple_key_translation *trans;
+ const struct apple_key_translation *trans, *table;
if (usage->code == KEY_FN) {
asc->fn_on = !!value;
@@ -157,10 +180,16 @@
if (fnmode) {
int do_translate;
- trans = apple_find_translation((hid->product < 0x21d ||
- hid->product >= 0x300) ?
- powerbook_fn_keys : apple_fn_keys,
- usage->code);
+ if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
+ hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
+ table = macbookair_fn_keys;
+ else if (hid->product < 0x21d || hid->product >= 0x300)
+ table = powerbook_fn_keys;
+ else
+ table = apple_fn_keys;
+
+ trans = apple_find_translation (table, usage->code);
+
if (trans) {
if (test_bit(usage->code, asc->pressed_fn))
do_translate = 1;
@@ -253,8 +282,8 @@
if ((asc->quirks & APPLE_RDESC_JIS) && *rsize >= 60 &&
rdesc[53] == 0x65 && rdesc[59] == 0x65) {
- dev_info(&hdev->dev, "fixing up MacBook JIS keyboard report "
- "descriptor\n");
+ hid_info(hdev,
+ "fixing up MacBook JIS keyboard report descriptor\n");
rdesc[53] = rdesc[59] = 0xe7;
}
return rdesc;
@@ -324,7 +353,7 @@
asc = kzalloc(sizeof(*asc), GFP_KERNEL);
if (asc == NULL) {
- dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+ hid_err(hdev, "can't alloc apple descriptor\n");
return -ENOMEM;
}
@@ -334,7 +363,7 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
@@ -345,7 +374,7 @@
ret = hid_hw_start(hdev, connect_mask);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
@@ -440,6 +469,18 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
@@ -473,7 +514,7 @@
ret = hid_register_driver(&apple_driver);
if (ret)
- printk(KERN_ERR "can't register apple driver\n");
+ pr_err("can't register apple driver\n");
return ret;
}
diff --git a/drivers/hid/hid-axff.c b/drivers/hid/hid-axff.c
index f42ee14..e5b961d 100644
--- a/drivers/hid/hid-axff.c
+++ b/drivers/hid/hid-axff.c
@@ -73,14 +73,14 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output reports found\n");
+ hid_err(hid, "no output reports found\n");
return -ENODEV;
}
report = list_first_entry(report_list, struct hid_report, list);
if (report->maxfield < 4) {
- dev_err(&hid->dev, "no fields in the report: %d\n", report->maxfield);
+ hid_err(hid, "no fields in the report: %d\n", report->maxfield);
return -ENODEV;
}
@@ -101,7 +101,7 @@
axff->report->field[3]->value[0] = 0x00;
usbhid_submit_report(hid, axff->report, USB_DIR_OUT);
- dev_info(&hid->dev, "Force Feedback for ACRUX game controllers by Sergei Kolzun<x0r@dv-life.ru>\n");
+ hid_info(hid, "Force Feedback for ACRUX game controllers by Sergei Kolzun<x0r@dv-life.ru>\n");
return 0;
@@ -114,17 +114,17 @@
{
int error;
- dev_dbg(&hdev->dev, "ACRUX HID hardware probe...");
+ dev_dbg(&hdev->dev, "ACRUX HID hardware probe...\n");
error = hid_parse(hdev);
if (error) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
return error;
}
error = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (error) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
return error;
}
@@ -134,7 +134,7 @@
* Do not fail device initialization completely as device
* may still be partially operable, just warn.
*/
- dev_warn(&hdev->dev,
+ hid_warn(hdev,
"Failed to enable force feedback support, error: %d\n",
error);
}
diff --git a/drivers/hid/hid-belkin.c b/drivers/hid/hid-belkin.c
index 4ce7aa3..a1a765a 100644
--- a/drivers/hid/hid-belkin.c
+++ b/drivers/hid/hid-belkin.c
@@ -56,14 +56,14 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
((quirks & BELKIN_HIDDEV) ? HID_CONNECT_HIDDEV_FORCE : 0));
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c
index 5925bdc..375b509 100644
--- a/drivers/hid/hid-cando.c
+++ b/drivers/hid/hid-cando.c
@@ -207,7 +207,7 @@
td = kmalloc(sizeof(struct cando_data), GFP_KERNEL);
if (!td) {
- dev_err(&hdev->dev, "cannot allocate Cando Touch data\n");
+ hid_err(hdev, "cannot allocate Cando Touch data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, td);
diff --git a/drivers/hid/hid-cherry.c b/drivers/hid/hid-cherry.c
index e880086..888ece6 100644
--- a/drivers/hid/hid-cherry.c
+++ b/drivers/hid/hid-cherry.c
@@ -30,8 +30,7 @@
unsigned int *rsize)
{
if (*rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
- dev_info(&hdev->dev, "fixing up Cherry Cymotion report "
- "descriptor\n");
+ hid_info(hdev, "fixing up Cherry Cymotion report descriptor\n");
rdesc[11] = rdesc[16] = 0xff;
rdesc[12] = rdesc[17] = 0x03;
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 88cb04e..c4d47e6 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -14,6 +14,8 @@
* any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
@@ -59,7 +61,8 @@
if (report_enum->report_id_hash[id])
return report_enum->report_id_hash[id];
- if (!(report = kzalloc(sizeof(struct hid_report), GFP_KERNEL)))
+ report = kzalloc(sizeof(struct hid_report), GFP_KERNEL);
+ if (!report)
return NULL;
if (id != 0)
@@ -90,8 +93,11 @@
return NULL;
}
- if (!(field = kzalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
- + values * sizeof(unsigned), GFP_KERNEL))) return NULL;
+ field = kzalloc((sizeof(struct hid_field) +
+ usages * sizeof(struct hid_usage) +
+ values * sizeof(unsigned)), GFP_KERNEL);
+ if (!field)
+ return NULL;
field->index = report->maxfield++;
report->field[field->index] = field;
@@ -172,10 +178,14 @@
static unsigned hid_lookup_collection(struct hid_parser *parser, unsigned type)
{
+ struct hid_collection *collection = parser->device->collection;
int n;
- for (n = parser->collection_stack_ptr - 1; n >= 0; n--)
- if (parser->device->collection[parser->collection_stack[n]].type == type)
- return parser->device->collection[parser->collection_stack[n]].usage;
+
+ for (n = parser->collection_stack_ptr - 1; n >= 0; n--) {
+ unsigned index = parser->collection_stack[n];
+ if (collection[index].type == type)
+ return collection[index].usage;
+ }
return 0; /* we know nothing about this usage type */
}
@@ -209,7 +219,8 @@
unsigned offset;
int i;
- if (!(report = hid_register_report(parser->device, report_type, parser->global.report_id))) {
+ report = hid_register_report(parser->device, report_type, parser->global.report_id);
+ if (!report) {
dbg_hid("hid_register_report failed\n");
return -1;
}
@@ -227,7 +238,8 @@
usages = max_t(int, parser->local.usage_index, parser->global.report_count);
- if ((field = hid_register_field(report, usages, parser->global.report_count)) == NULL)
+ field = hid_register_field(report, usages, parser->global.report_count);
+ if (!field)
return 0;
field->physical = hid_lookup_collection(parser, HID_COLLECTION_PHYSICAL);
@@ -652,13 +664,12 @@
return -ENOMEM;
device->rsize = size;
- parser = vmalloc(sizeof(struct hid_parser));
+ parser = vzalloc(sizeof(struct hid_parser));
if (!parser) {
ret = -ENOMEM;
goto err;
}
- memset(parser, 0, sizeof(struct hid_parser));
parser->device = device;
end = start + size;
@@ -672,7 +683,8 @@
if (dispatch_type[item.type](parser, &item)) {
dbg_hid("item %u %u %u %u parsing failed\n",
- item.format, (unsigned)item.size, (unsigned)item.type, (unsigned)item.tag);
+ item.format, (unsigned)item.size,
+ (unsigned)item.type, (unsigned)item.tag);
goto err;
}
@@ -737,13 +749,14 @@
* Search linux-kernel and linux-usb-devel archives for "hid-core extract".
*/
-static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
+static __u32 extract(const struct hid_device *hid, __u8 *report,
+ unsigned offset, unsigned n)
{
u64 x;
if (n > 32)
- printk(KERN_WARNING "HID: extract() called with n (%d) > 32! (%s)\n",
- n, current->comm);
+ hid_warn(hid, "extract() called with n (%d) > 32! (%s)\n",
+ n, current->comm);
report += offset >> 3; /* adjust byte index */
offset &= 7; /* now only need bit offset into one byte */
@@ -760,18 +773,19 @@
* endianness of register values by considering a register
* a "cached" copy of the little endiad bit stream.
*/
-static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
+static void implement(const struct hid_device *hid, __u8 *report,
+ unsigned offset, unsigned n, __u32 value)
{
u64 x;
u64 m = (1ULL << n) - 1;
if (n > 32)
- printk(KERN_WARNING "HID: implement() called with n (%d) > 32! (%s)\n",
- n, current->comm);
+ hid_warn(hid, "%s() called with n (%d) > 32! (%s)\n",
+ __func__, n, current->comm);
if (value > m)
- printk(KERN_WARNING "HID: implement() called with too large value %d! (%s)\n",
- value, current->comm);
+ hid_warn(hid, "%s() called with too large value %d! (%s)\n",
+ __func__, value, current->comm);
WARN_ON(value > m);
value &= m;
@@ -788,7 +802,7 @@
* Search an array for a value.
*/
-static __inline__ int search(__s32 *array, __s32 value, unsigned n)
+static int search(__s32 *array, __s32 value, unsigned n)
{
while (n--) {
if (*array++ == value)
@@ -887,18 +901,22 @@
__s32 max = field->logical_maximum;
__s32 *value;
- if (!(value = kmalloc(sizeof(__s32) * count, GFP_ATOMIC)))
+ value = kmalloc(sizeof(__s32) * count, GFP_ATOMIC);
+ if (!value)
return;
for (n = 0; n < count; n++) {
- value[n] = min < 0 ? snto32(extract(data, offset + n * size, size), size) :
- extract(data, offset + n * size, size);
+ value[n] = min < 0 ?
+ snto32(extract(hid, data, offset + n * size, size),
+ size) :
+ extract(hid, data, offset + n * size, size);
- if (!(field->flags & HID_MAIN_ITEM_VARIABLE) /* Ignore report if ErrorRollOver */
- && value[n] >= min && value[n] <= max
- && field->usage[value[n] - min].hid == HID_UP_KEYBOARD + 1)
- goto exit;
+ /* Ignore report if ErrorRollOver */
+ if (!(field->flags & HID_MAIN_ITEM_VARIABLE) &&
+ value[n] >= min && value[n] <= max &&
+ field->usage[value[n] - min].hid == HID_UP_KEYBOARD + 1)
+ goto exit;
}
for (n = 0; n < count; n++) {
@@ -928,7 +946,8 @@
* Output the field into the report.
*/
-static void hid_output_field(struct hid_field *field, __u8 *data)
+static void hid_output_field(const struct hid_device *hid,
+ struct hid_field *field, __u8 *data)
{
unsigned count = field->report_count;
unsigned offset = field->report_offset;
@@ -937,9 +956,11 @@
for (n = 0; n < count; n++) {
if (field->logical_minimum < 0) /* signed values */
- implement(data, offset + n * size, size, s32ton(field->value[n], size));
+ implement(hid, data, offset + n * size, size,
+ s32ton(field->value[n], size));
else /* unsigned values */
- implement(data, offset + n * size, size, field->value[n]);
+ implement(hid, data, offset + n * size, size,
+ field->value[n]);
}
}
@@ -956,7 +977,7 @@
memset(data, 0, ((report->size - 1) >> 3) + 1);
for (n = 0; n < report->maxfield; n++)
- hid_output_field(report->field[n], data);
+ hid_output_field(report->device, report->field[n], data);
}
EXPORT_SYMBOL_GPL(hid_output_report);
@@ -1169,8 +1190,7 @@
hdev->claimed |= HID_CLAIMED_HIDRAW;
if (!hdev->claimed) {
- dev_err(&hdev->dev, "claimed by neither input, hiddev nor "
- "hidraw\n");
+ hid_err(hdev, "claimed by neither input, hiddev nor hidraw\n");
return -ENODEV;
}
@@ -1210,9 +1230,9 @@
bus = "<UNKNOWN>";
}
- dev_info(&hdev->dev, "%s: %s HID v%x.%02x %s [%s] on %s\n",
- buf, bus, hdev->version >> 8, hdev->version & 0xff,
- type, hdev->name, hdev->phys);
+ hid_info(hdev, "%s: %s HID v%x.%02x %s [%s] on %s\n",
+ buf, bus, hdev->version >> 8, hdev->version & 0xff,
+ type, hdev->name, hdev->phys);
return 0;
}
@@ -1230,7 +1250,7 @@
EXPORT_SYMBOL_GPL(hid_disconnect);
/* a list of devices for which there is a specialized driver on HID bus */
-static const struct hid_device_id hid_blacklist[] = {
+static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
@@ -1276,6 +1296,12 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -1292,6 +1318,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
@@ -1301,6 +1328,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
@@ -1496,9 +1524,9 @@
if (!hid_match_device(hdev, hdrv))
return 0;
- /* generic wants all non-blacklisted */
+ /* generic wants all that don't have specialized driver */
if (!strncmp(hdrv->name, "generic-", 8))
- return !hid_match_id(hdev, hid_blacklist);
+ return !hid_match_id(hdev, hid_have_special_driver);
return 1;
}
@@ -1757,6 +1785,12 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
@@ -1948,12 +1982,12 @@
int ret;
if (hid_debug)
- printk(KERN_WARNING "HID: hid_debug is now used solely for parser and driver debugging.\n"
- "HID: debugfs is now used for inspecting the device (report descriptor, reports)\n");
+ pr_warn("hid_debug is now used solely for parser and driver debugging.\n"
+ "debugfs is now used for inspecting the device (report descriptor, reports)\n");
ret = bus_register(&hid_bus_type);
if (ret) {
- printk(KERN_ERR "HID: can't register hid bus\n");
+ pr_err("can't register hid bus\n");
goto err;
}
diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c
index 4cd0e23..2f0be4c 100644
--- a/drivers/hid/hid-cypress.c
+++ b/drivers/hid/hid-cypress.c
@@ -107,13 +107,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 75c5e23..555382f 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -26,6 +26,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
@@ -393,7 +395,7 @@
buf = resolv_usage_page(usage >> 16, f);
if (IS_ERR(buf)) {
- printk(KERN_ERR "error allocating HID debug buffer\n");
+ pr_err("error allocating HID debug buffer\n");
return NULL;
}
diff --git a/drivers/hid/hid-drff.c b/drivers/hid/hid-drff.c
index 968b04f..afcf3d6 100644
--- a/drivers/hid/hid-drff.c
+++ b/drivers/hid/hid-drff.c
@@ -96,18 +96,18 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output reports found\n");
+ hid_err(hid, "no output reports found\n");
return -ENODEV;
}
report = list_first_entry(report_list, struct hid_report, list);
if (report->maxfield < 1) {
- dev_err(&hid->dev, "no fields in the report\n");
+ hid_err(hid, "no fields in the report\n");
return -ENODEV;
}
if (report->field[0]->report_count < 7) {
- dev_err(&hid->dev, "not enough values in the field\n");
+ hid_err(hid, "not enough values in the field\n");
return -ENODEV;
}
@@ -133,8 +133,8 @@
drff->report->field[0]->value[6] = 0x00;
usbhid_submit_report(hid, drff->report, USB_DIR_OUT);
- dev_info(&hid->dev, "Force Feedback for DragonRise Inc. game "
- "controllers by Richard Walmsley <richwalm@gmail.com>\n");
+ hid_info(hid, "Force Feedback for DragonRise Inc. "
+ "game controllers by Richard Walmsley <richwalm@gmail.com>\n");
return 0;
}
@@ -153,13 +153,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 5a1b52e..72b1dd8 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -223,7 +223,7 @@
td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
- dev_err(&hdev->dev, "cannot allocate eGalax data\n");
+ hid_err(hdev, "cannot allocate eGalax data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, td);
diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c
index 6e31f30..79d0c61 100644
--- a/drivers/hid/hid-elecom.c
+++ b/drivers/hid/hid-elecom.c
@@ -24,8 +24,7 @@
unsigned int *rsize)
{
if (*rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) {
- dev_info(&hdev->dev, "Fixing up Elecom BM084 "
- "report descriptor.\n");
+ hid_info(hdev, "Fixing up Elecom BM084 report descriptor\n");
rdesc[47] = 0x00;
}
return rdesc;
diff --git a/drivers/hid/hid-emsff.c b/drivers/hid/hid-emsff.c
new file mode 100644
index 0000000..81877c6
--- /dev/null
+++ b/drivers/hid/hid-emsff.c
@@ -0,0 +1,161 @@
+/*
+ * Force feedback support for EMS Trio Linker Plus II
+ *
+ * Copyright (c) 2010 Ignaz Forster <ignaz.forster@gmx.de>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+#include "usbhid/usbhid.h"
+
+struct emsff_device {
+ struct hid_report *report;
+};
+
+static int emsff_play(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct emsff_device *emsff = data;
+ int weak, strong;
+
+ weak = effect->u.rumble.weak_magnitude;
+ strong = effect->u.rumble.strong_magnitude;
+
+ dbg_hid("called with 0x%04x 0x%04x\n", strong, weak);
+
+ weak = weak * 0xff / 0xffff;
+ strong = strong * 0xff / 0xffff;
+
+ emsff->report->field[0]->value[1] = weak;
+ emsff->report->field[0]->value[2] = strong;
+
+ dbg_hid("running with 0x%02x 0x%02x\n", strong, weak);
+ usbhid_submit_report(hid, emsff->report, USB_DIR_OUT);
+
+ return 0;
+}
+
+static int emsff_init(struct hid_device *hid)
+{
+ struct emsff_device *emsff;
+ struct hid_report *report;
+ struct hid_input *hidinput = list_first_entry(&hid->inputs,
+ struct hid_input, list);
+ struct list_head *report_list =
+ &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ int error;
+
+ if (list_empty(report_list)) {
+ hid_err(hid, "no output reports found\n");
+ return -ENODEV;
+ }
+
+ report = list_first_entry(report_list, struct hid_report, list);
+ if (report->maxfield < 1) {
+ hid_err(hid, "no fields in the report\n");
+ return -ENODEV;
+ }
+
+ if (report->field[0]->report_count < 7) {
+ hid_err(hid, "not enough values in the field\n");
+ return -ENODEV;
+ }
+
+ emsff = kzalloc(sizeof(struct emsff_device), GFP_KERNEL);
+ if (!emsff)
+ return -ENOMEM;
+
+ set_bit(FF_RUMBLE, dev->ffbit);
+
+ error = input_ff_create_memless(dev, emsff, emsff_play);
+ if (error) {
+ kfree(emsff);
+ return error;
+ }
+
+ emsff->report = report;
+ emsff->report->field[0]->value[0] = 0x01;
+ emsff->report->field[0]->value[1] = 0x00;
+ emsff->report->field[0]->value[2] = 0x00;
+ emsff->report->field[0]->value[3] = 0x00;
+ emsff->report->field[0]->value[4] = 0x00;
+ emsff->report->field[0]->value[5] = 0x00;
+ emsff->report->field[0]->value[6] = 0x00;
+ usbhid_submit_report(hid, emsff->report, USB_DIR_OUT);
+
+ hid_info(hid, "force feedback for EMS based devices by Ignaz Forster <ignaz.forster@gmx.de>\n");
+
+ return 0;
+}
+
+static int ems_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ goto err;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto err;
+ }
+
+ emsff_init(hdev);
+
+ return 0;
+err:
+ return ret;
+}
+
+static const struct hid_device_id ems_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_EMS, 0x118) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, ems_devices);
+
+static struct hid_driver ems_driver = {
+ .name = "hkems",
+ .id_table = ems_devices,
+ .probe = ems_probe,
+};
+
+static int ems_init(void)
+{
+ return hid_register_driver(&ems_driver);
+}
+
+static void ems_exit(void)
+{
+ hid_unregister_driver(&ems_driver);
+}
+
+module_init(ems_init);
+module_exit(ems_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 88dfcf4..279ba53 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -87,7 +87,7 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output reports found\n");
+ hid_err(hid, "no output reports found\n");
return -ENODEV;
}
@@ -95,12 +95,12 @@
report = list_entry(report_ptr, struct hid_report, list);
if (report->maxfield < 1) {
- dev_err(&hid->dev, "no fields in the report\n");
+ hid_err(hid, "no fields in the report\n");
return -ENODEV;
}
if (report->field[0]->report_count < 6) {
- dev_err(&hid->dev, "not enough values in the field\n");
+ hid_err(hid, "not enough values in the field\n");
return -ENODEV;
}
@@ -128,8 +128,7 @@
usbhid_submit_report(hid, gaff->report, USB_DIR_OUT);
- dev_info(&hid->dev, "Force Feedback for GreenAsia 0x12"
- " devices by Lukasz Lubojanski <lukasz@lubojanski.info>\n");
+ hid_info(hid, "Force Feedback for GreenAsia 0x12 devices by Lukasz Lubojanski <lukasz@lubojanski.info>\n");
return 0;
}
@@ -148,13 +147,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3341baa..5cd1a6a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -97,6 +97,12 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
@@ -156,6 +162,7 @@
#define USB_VENDOR_ID_CHICONY 0x04f2
#define USB_DEVICE_ID_CHICONY_TACTICAL_PAD 0x0418
#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d
+#define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618
#define USB_VENDOR_ID_CIDC 0x1677
@@ -203,6 +210,9 @@
#define USB_VENDOR_ID_ELO 0x04E7
#define USB_DEVICE_ID_ELO_TS2700 0x0020
+#define USB_VENDOR_ID_EMS 0x2006
+#define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
+
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d8d372b..e60fdb8 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -319,21 +319,21 @@
switch (field->application) {
case HID_GD_MOUSE:
- case HID_GD_POINTER: code += 0x110; break;
+ case HID_GD_POINTER: code += BTN_MOUSE; break;
case HID_GD_JOYSTICK:
if (code <= 0xf)
code += BTN_JOYSTICK;
else
code += BTN_TRIGGER_HAPPY;
break;
- case HID_GD_GAMEPAD: code += 0x130; break;
+ case HID_GD_GAMEPAD: code += BTN_GAMEPAD; break;
default:
switch (field->physical) {
case HID_GD_MOUSE:
- case HID_GD_POINTER: code += 0x110; break;
- case HID_GD_JOYSTICK: code += 0x120; break;
- case HID_GD_GAMEPAD: code += 0x130; break;
- default: code += 0x100;
+ case HID_GD_POINTER: code += BTN_MOUSE; break;
+ case HID_GD_JOYSTICK: code += BTN_JOYSTICK; break;
+ case HID_GD_GAMEPAD: code += BTN_GAMEPAD; break;
+ default: code += BTN_MISC;
}
}
@@ -817,14 +817,14 @@
{
struct hid_device *hid = input_get_drvdata(dev);
- return hid->ll_driver->open(hid);
+ return hid_hw_open(hid);
}
static void hidinput_close(struct input_dev *dev)
{
struct hid_device *hid = input_get_drvdata(dev);
- hid->ll_driver->close(hid);
+ hid_hw_close(hid);
}
/*
@@ -871,7 +871,7 @@
if (!hidinput || !input_dev) {
kfree(hidinput);
input_free_device(input_dev);
- err_hid("Out of memory during hid input probe");
+ hid_err(hid, "Out of memory during hid input probe\n");
goto out_unwind;
}
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index 817247e..f2ba9ef 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -32,8 +32,8 @@
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
rdesc[73] == 0x95 && rdesc[74] == 0x01) {
- dev_info(&hdev->dev, "fixing up Kye/Genius Ergo Mouse report "
- "descriptor\n");
+ hid_info(hdev,
+ "fixing up Kye/Genius Ergo Mouse report descriptor\n");
rdesc[62] = 0x09;
rdesc[64] = 0x04;
rdesc[66] = 0x07;
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index b629fba..aef4104 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -53,23 +53,22 @@
if ((quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 &&
rdesc[84] == 0x8c && rdesc[85] == 0x02) {
- dev_info(&hdev->dev, "fixing up Logitech keyboard report "
- "descriptor\n");
+ hid_info(hdev,
+ "fixing up Logitech keyboard report descriptor\n");
rdesc[84] = rdesc[89] = 0x4d;
rdesc[85] = rdesc[90] = 0x10;
}
if ((quirks & LG_RDESC_REL_ABS) && *rsize >= 50 &&
rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
rdesc[49] == 0x81 && rdesc[50] == 0x06) {
- dev_info(&hdev->dev, "fixing up rel/abs in Logitech "
- "report descriptor\n");
+ hid_info(hdev,
+ "fixing up rel/abs in Logitech report descriptor\n");
rdesc[33] = rdesc[50] = 0x02;
}
if ((quirks & LG_FF4) && *rsize >= 101 &&
rdesc[41] == 0x95 && rdesc[42] == 0x0B &&
rdesc[47] == 0x05 && rdesc[48] == 0x09) {
- dev_info(&hdev->dev, "fixing up Logitech Speed Force Wireless "
- "button descriptor\n");
+ hid_info(hdev, "fixing up Logitech Speed Force Wireless button descriptor\n");
rdesc[41] = 0x05;
rdesc[42] = 0x09;
rdesc[47] = 0x95;
@@ -288,7 +287,7 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
@@ -297,7 +296,7 @@
ret = hid_hw_start(hdev, connect_mask);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-lg2ff.c b/drivers/hid/hid-lg2ff.c
index 4258253c..3c31bc6 100644
--- a/drivers/hid/hid-lg2ff.c
+++ b/drivers/hid/hid-lg2ff.c
@@ -72,18 +72,18 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output report found\n");
+ hid_err(hid, "no output report found\n");
return -ENODEV;
}
report = list_entry(report_list->next, struct hid_report, list);
if (report->maxfield < 1) {
- dev_err(&hid->dev, "output report is empty\n");
+ hid_err(hid, "output report is empty\n");
return -ENODEV;
}
if (report->field[0]->report_count < 7) {
- dev_err(&hid->dev, "not enough values in the field\n");
+ hid_err(hid, "not enough values in the field\n");
return -ENODEV;
}
@@ -110,8 +110,7 @@
usbhid_submit_report(hid, report, USB_DIR_OUT);
- dev_info(&hid->dev, "Force feedback for Logitech RumblePad/Rumblepad 2 by "
- "Anssi Hannula <anssi.hannula@gmail.com>\n");
+ hid_info(hid, "Force feedback for Logitech RumblePad/Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>\n");
return 0;
}
diff --git a/drivers/hid/hid-lg3ff.c b/drivers/hid/hid-lg3ff.c
index 4002832..f98644c 100644
--- a/drivers/hid/hid-lg3ff.c
+++ b/drivers/hid/hid-lg3ff.c
@@ -141,20 +141,20 @@
/* Find the report to use */
if (list_empty(report_list)) {
- err_hid("No output report found");
+ hid_err(hid, "No output report found\n");
return -1;
}
/* Check that the report looks ok */
report = list_entry(report_list->next, struct hid_report, list);
if (!report) {
- err_hid("NULL output report");
+ hid_err(hid, "NULL output report\n");
return -1;
}
field = report->field[0];
if (!field) {
- err_hid("NULL field");
+ hid_err(hid, "NULL field\n");
return -1;
}
@@ -169,8 +169,7 @@
if (test_bit(FF_AUTOCENTER, dev->ffbit))
dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
- dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
- "Gary Stein <LordCnidarian@gmail.com>\n");
+ hid_info(hid, "Force feedback for Logitech Flight System G940 by Gary Stein <LordCnidarian@gmail.com>\n");
return 0;
}
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 7eef5a2..fa550c8 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -101,20 +101,20 @@
/* Find the report to use */
if (list_empty(report_list)) {
- err_hid("No output report found");
+ hid_err(hid, "No output report found\n");
return -1;
}
/* Check that the report looks ok */
report = list_entry(report_list->next, struct hid_report, list);
if (!report) {
- err_hid("NULL output report");
+ hid_err(hid, "NULL output report\n");
return -1;
}
field = report->field[0];
if (!field) {
- err_hid("NULL field");
+ hid_err(hid, "NULL field\n");
return -1;
}
@@ -129,8 +129,7 @@
if (test_bit(FF_AUTOCENTER, dev->ffbit))
dev->ff->set_autocenter = hid_lg4ff_set_autocenter;
- dev_info(&hid->dev, "Force feedback for Logitech Speed Force Wireless by "
- "Simon Wood <simon@mungewell.org>\n");
+ hid_info(hid, "Force feedback for Logitech Speed Force Wireless by Simon Wood <simon@mungewell.org>\n");
return 0;
}
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 61142b7..90d0ef2 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -27,6 +27,8 @@
* e-mail - mail your message to <johann.deneux@it.uu.se>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -146,7 +148,7 @@
/* Find the report to use */
if (list_empty(report_list)) {
- err_hid("No output report found");
+ hid_err(hid, "No output report found\n");
return -1;
}
@@ -154,7 +156,7 @@
report = list_entry(report_list->next, struct hid_report, list);
field = report->field[0];
if (!field) {
- err_hid("NULL field");
+ hid_err(hid, "NULL field\n");
return -1;
}
@@ -176,7 +178,7 @@
if ( test_bit(FF_AUTOCENTER, dev->ffbit) )
dev->ff->set_autocenter = hid_lgff_set_autocenter;
- printk(KERN_INFO "Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>\n");
+ pr_info("Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>\n");
return 0;
}
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index ed732b7..698e645 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -12,6 +12,8 @@
* any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
@@ -451,7 +453,7 @@
msc = kzalloc(sizeof(*msc), GFP_KERNEL);
if (msc == NULL) {
- dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n");
+ hid_err(hdev, "can't alloc magicmouse descriptor\n");
return -ENOMEM;
}
@@ -464,13 +466,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "magicmouse hid parse failed\n");
+ hid_err(hdev, "magicmouse hid parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "magicmouse hw start failed\n");
+ hid_err(hdev, "magicmouse hw start failed\n");
goto err_free;
}
@@ -491,7 +493,7 @@
}
if (!report) {
- dev_err(&hdev->dev, "unable to register touch report\n");
+ hid_err(hdev, "unable to register touch report\n");
ret = -ENOMEM;
goto err_stop_hw;
}
@@ -500,8 +502,7 @@
ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
if (ret != sizeof(feature)) {
- dev_err(&hdev->dev, "unable to request touch data (%d)\n",
- ret);
+ hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
}
@@ -545,7 +546,7 @@
ret = hid_register_driver(&magicmouse_driver);
if (ret)
- printk(KERN_ERR "can't register magicmouse driver\n");
+ pr_err("can't register magicmouse driver\n");
return ret;
}
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index dc618c3..0f6fc54 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -40,8 +40,7 @@
if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
- dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver "
- "Model 1028 report descriptor\n");
+ hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
rdesc[557] = 0x35;
rdesc[559] = 0x45;
}
@@ -155,14 +154,14 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT | ((quirks & MS_HIDINPUT) ?
HID_CONNECT_HIDINPUT_FORCE : 0));
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-monterey.c b/drivers/hid/hid-monterey.c
index c95c31e..dedf757 100644
--- a/drivers/hid/hid-monterey.c
+++ b/drivers/hid/hid-monterey.c
@@ -26,8 +26,7 @@
unsigned int *rsize)
{
if (*rsize >= 30 && rdesc[29] == 0x05 && rdesc[30] == 0x09) {
- dev_info(&hdev->dev, "fixing up button/consumer in HID report "
- "descriptor\n");
+ hid_info(hdev, "fixing up button/consumer in HID report descriptor\n");
rdesc[30] = 0x0c;
}
return rdesc;
diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c
index 15d0381..9fb050c 100644
--- a/drivers/hid/hid-mosart.c
+++ b/drivers/hid/hid-mosart.c
@@ -203,7 +203,7 @@
td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
if (!td) {
- dev_err(&hdev->dev, "cannot allocate MosArt data\n");
+ hid_err(hdev, "cannot allocate MosArt data\n");
return -ENOMEM;
}
td->valid = false;
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 69169ef..beb4034 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -130,8 +130,7 @@
if (ret == 8) {
ret = ntrig_version_string(&data[2], buf);
- dev_info(&hdev->dev,
- "Firmware version: %s (%02x%02x %02x%02x)\n",
+ hid_info(hdev, "Firmware version: %s (%02x%02x %02x%02x)\n",
buf, data[2], data[3], data[4], data[5]);
}
@@ -831,7 +830,7 @@
nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
if (!nd) {
- dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+ hid_err(hdev, "cannot allocate N-Trig data\n");
return -ENOMEM;
}
@@ -850,13 +849,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
index 2e79716..e90edfc 100644
--- a/drivers/hid/hid-ortek.c
+++ b/drivers/hid/hid-ortek.c
@@ -23,8 +23,7 @@
unsigned int *rsize)
{
if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
- dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
- "report descriptor.\n");
+ hid_info(hdev, "Fixing up Ortek WKB-2000 report descriptor\n");
rdesc[55] = 0x92;
}
return rdesc;
diff --git a/drivers/hid/hid-petalynx.c b/drivers/hid/hid-petalynx.c
index 308d6ae..f1ea3ff 100644
--- a/drivers/hid/hid-petalynx.c
+++ b/drivers/hid/hid-petalynx.c
@@ -29,8 +29,7 @@
if (*rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 &&
rdesc[41] == 0x00 && rdesc[59] == 0x26 &&
rdesc[60] == 0xf9 && rdesc[61] == 0x00) {
- dev_info(&hdev->dev, "fixing up Petalynx Maxter Remote report "
- "descriptor\n");
+ hid_info(hdev, "fixing up Petalynx Maxter Remote report descriptor\n");
rdesc[60] = 0xfa;
rdesc[40] = 0xfa;
}
@@ -77,13 +76,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index abd0bdc..de9cf21b 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -253,7 +253,7 @@
if (report->id == id)
return report;
}
- dev_warn(&hdev->dev, "No report with id 0x%x found\n", id);
+ hid_warn(hdev, "No report with id 0x%x found\n", id);
return NULL;
}
@@ -1329,7 +1329,7 @@
verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
if (!verinfo) {
- dev_err(&hdev->dev, "no version response from PicoLCD");
+ hid_err(hdev, "no version response from PicoLCD\n");
return -ENODEV;
}
@@ -1337,14 +1337,14 @@
data->version[0] = verinfo->raw_data[1];
data->version[1] = verinfo->raw_data[0];
if (data->status & PICOLCD_BOOTLOADER) {
- dev_info(&hdev->dev, "PicoLCD, bootloader version %d.%d\n",
- verinfo->raw_data[1], verinfo->raw_data[0]);
+ hid_info(hdev, "PicoLCD, bootloader version %d.%d\n",
+ verinfo->raw_data[1], verinfo->raw_data[0]);
} else {
- dev_info(&hdev->dev, "PicoLCD, firmware version %d.%d\n",
- verinfo->raw_data[1], verinfo->raw_data[0]);
+ hid_info(hdev, "PicoLCD, firmware version %d.%d\n",
+ verinfo->raw_data[1], verinfo->raw_data[0]);
}
} else {
- dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD\n");
+ hid_err(hdev, "confused, got unexpected version response from PicoLCD\n");
ret = -EINVAL;
}
kfree(verinfo);
@@ -2329,8 +2329,7 @@
(flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0),
hdev->debug_dir, data, &picolcd_debug_flash_fops);
} else if (flash_r || flash_w)
- dev_warn(&hdev->dev, "Unexpected FLASH access reports, "
- "please submit rdesc for review\n");
+ hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n");
}
static void picolcd_exit_devfs(struct picolcd_data *data)
@@ -2458,13 +2457,13 @@
return -ENODEV;
if (report->maxfield != 1 || report->field[0]->report_count != 2 ||
report->field[0]->report_size != 8) {
- dev_err(&hdev->dev, "unsupported KEY_STATE report");
+ hid_err(hdev, "unsupported KEY_STATE report\n");
return -EINVAL;
}
idev = input_allocate_device();
if (idev == NULL) {
- dev_err(&hdev->dev, "failed to allocate input device");
+ hid_err(hdev, "failed to allocate input device\n");
return -ENOMEM;
}
input_set_drvdata(idev, hdev);
@@ -2486,7 +2485,7 @@
input_set_capability(idev, EV_KEY, data->keycode[i]);
error = input_register_device(idev);
if (error) {
- dev_err(&hdev->dev, "error registering the input device");
+ hid_err(hdev, "error registering the input device\n");
input_free_device(idev);
return error;
}
@@ -2523,9 +2522,8 @@
return error;
if (data->version[0] != 0 && data->version[1] != 3)
- dev_info(&hdev->dev, "Device with untested firmware revision, "
- "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
- dev_name(&hdev->dev));
+ hid_info(hdev, "Device with untested firmware revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
+ dev_name(&hdev->dev));
/* Setup keypad input device */
error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev));
@@ -2582,9 +2580,8 @@
return error;
if (data->version[0] != 1 && data->version[1] != 0)
- dev_info(&hdev->dev, "Device with untested bootloader revision, "
- "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
- dev_name(&hdev->dev));
+ hid_info(hdev, "Device with untested bootloader revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
+ dev_name(&hdev->dev));
picolcd_init_devfs(data, NULL, NULL,
picolcd_out_report(REPORT_BL_READ_MEMORY, hdev),
@@ -2606,7 +2603,7 @@
*/
data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL);
if (data == NULL) {
- dev_err(&hdev->dev, "can't allocate space for Minibox PicoLCD device data\n");
+ hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n");
error = -ENOMEM;
goto err_no_cleanup;
}
@@ -2622,7 +2619,7 @@
/* Parse the device reports and start it up */
error = hid_parse(hdev);
if (error) {
- dev_err(&hdev->dev, "device report parse failed\n");
+ hid_err(hdev, "device report parse failed\n");
goto err_cleanup_data;
}
@@ -2632,25 +2629,25 @@
error = hid_hw_start(hdev, 0);
hdev->claimed = 0;
if (error) {
- dev_err(&hdev->dev, "hardware start failed\n");
+ hid_err(hdev, "hardware start failed\n");
goto err_cleanup_data;
}
- error = hdev->ll_driver->open(hdev);
+ error = hid_hw_open(hdev);
if (error) {
- dev_err(&hdev->dev, "failed to open input interrupt pipe for key and IR events\n");
+ hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n");
goto err_cleanup_hid_hw;
}
error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay);
if (error) {
- dev_err(&hdev->dev, "failed to create sysfs attributes\n");
+ hid_err(hdev, "failed to create sysfs attributes\n");
goto err_cleanup_hid_ll;
}
error = device_create_file(&hdev->dev, &dev_attr_operation_mode);
if (error) {
- dev_err(&hdev->dev, "failed to create sysfs attributes\n");
+ hid_err(hdev, "failed to create sysfs attributes\n");
goto err_cleanup_sysfs1;
}
@@ -2669,7 +2666,7 @@
err_cleanup_sysfs1:
device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
err_cleanup_hid_ll:
- hdev->ll_driver->close(hdev);
+ hid_hw_close(hdev);
err_cleanup_hid_hw:
hid_hw_stop(hdev);
err_cleanup_data:
@@ -2700,7 +2697,7 @@
picolcd_exit_devfs(data);
device_remove_file(&hdev->dev, &dev_attr_operation_mode);
device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
- hdev->ll_driver->close(hdev);
+ hid_hw_close(hdev);
hid_hw_stop(hdev);
hid_set_drvdata(hdev, NULL);
@@ -2754,7 +2751,7 @@
{
hid_unregister_driver(&picolcd_driver);
#ifdef CONFIG_HID_PICOLCD_FB
- flush_scheduled_work();
+ flush_work_sync(&picolcd_fb_cleanup);
WARN_ON(fb_pending);
#endif
}
diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c
index 9f41e2b..06e5300 100644
--- a/drivers/hid/hid-pl.c
+++ b/drivers/hid/hid-pl.c
@@ -103,7 +103,7 @@
*/
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output reports found\n");
+ hid_err(hid, "no output reports found\n");
return -ENODEV;
}
@@ -112,14 +112,13 @@
report_ptr = report_ptr->next;
if (report_ptr == report_list) {
- dev_err(&hid->dev, "required output report is "
- "missing\n");
+ hid_err(hid, "required output report is missing\n");
return -ENODEV;
}
report = list_entry(report_ptr, struct hid_report, list);
if (report->maxfield < 1) {
- dev_err(&hid->dev, "no fields in the report\n");
+ hid_err(hid, "no fields in the report\n");
return -ENODEV;
}
@@ -137,7 +136,7 @@
weak = &report->field[3]->value[0];
debug("detected 4-field device");
} else {
- dev_err(&hid->dev, "not enough fields or values\n");
+ hid_err(hid, "not enough fields or values\n");
return -ENODEV;
}
@@ -164,8 +163,7 @@
usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
}
- dev_info(&hid->dev, "Force feedback for PantherLord/GreenAsia "
- "devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
+ hid_info(hid, "Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
return 0;
}
@@ -185,13 +183,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c
index 48eab84..ab19f29 100644
--- a/drivers/hid/hid-prodikeys.c
+++ b/drivers/hid/hid-prodikeys.c
@@ -16,6 +16,8 @@
* any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/module.h>
#include <linux/usb.h>
@@ -130,7 +132,7 @@
return -EINVAL;
}
-static DEVICE_ATTR(channel, S_IRUGO | S_IWUGO, show_channel,
+static DEVICE_ATTR(channel, S_IRUGO | S_IWUSR | S_IWGRP , show_channel,
store_channel);
static struct device_attribute *sysfs_device_attr_channel = {
@@ -169,7 +171,7 @@
return -EINVAL;
}
-static DEVICE_ATTR(sustain, S_IRUGO | S_IWUGO, show_sustain,
+static DEVICE_ATTR(sustain, S_IRUGO | S_IWUSR | S_IWGRP, show_sustain,
store_sustain);
static struct device_attribute *sysfs_device_attr_sustain = {
@@ -207,7 +209,7 @@
return -EINVAL;
}
-static DEVICE_ATTR(octave, S_IRUGO | S_IWUGO, show_octave,
+static DEVICE_ATTR(octave, S_IRUGO | S_IWUSR | S_IWGRP, show_octave,
store_octave);
static struct device_attribute *sysfs_device_attr_octave = {
@@ -285,11 +287,11 @@
continue;
if (report->maxfield < 1) {
- dev_err(&hdev->dev, "output report is empty\n");
+ hid_err(hdev, "output report is empty\n");
break;
}
if (report->field[0]->report_count != 2) {
- dev_err(&hdev->dev, "field count too low\n");
+ hid_err(hdev, "field count too low\n");
break;
}
pm->pcmidi_report6 = report;
@@ -746,8 +748,8 @@
if (*rsize == 178 &&
rdesc[111] == 0x06 && rdesc[112] == 0x00 &&
rdesc[113] == 0xff) {
- dev_info(&hdev->dev, "fixing up pc-midi keyboard report "
- "descriptor\n");
+ hid_info(hdev,
+ "fixing up pc-midi keyboard report descriptor\n");
rdesc[144] = 0x18; /* report 4: was 0x10 report count */
}
@@ -805,7 +807,7 @@
pk = kzalloc(sizeof(*pk), GFP_KERNEL);
if (pk == NULL) {
- dev_err(&hdev->dev, "prodikeys: can't alloc descriptor\n");
+ hid_err(hdev, "can't alloc descriptor\n");
return -ENOMEM;
}
@@ -813,8 +815,7 @@
pm = kzalloc(sizeof(*pm), GFP_KERNEL);
if (pm == NULL) {
- dev_err(&hdev->dev,
- "prodikeys: can't alloc descriptor\n");
+ hid_err(hdev, "can't alloc descriptor\n");
ret = -ENOMEM;
goto err_free;
}
@@ -827,7 +828,7 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "prodikeys: hid parse failed\n");
+ hid_err(hdev, "hid parse failed\n");
goto err_free;
}
@@ -837,7 +838,7 @@
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "prodikeys: hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
@@ -896,7 +897,7 @@
ret = hid_register_driver(&pk_driver);
if (ret)
- printk(KERN_ERR "can't register prodikeys driver\n");
+ pr_err("can't register prodikeys driver\n");
return ret;
}
diff --git a/drivers/hid/hid-quanta.c b/drivers/hid/hid-quanta.c
index 54d3db5..87a54df 100644
--- a/drivers/hid/hid-quanta.c
+++ b/drivers/hid/hid-quanta.c
@@ -195,7 +195,7 @@
td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
if (!td) {
- dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
+ hid_err(hdev, "cannot allocate Quanta Touch data\n");
return -ENOMEM;
}
td->valid = false;
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
index f776957..73199de 100644
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -90,8 +90,7 @@
kfree(data);
return 0;
} else { /* unknown answer */
- dev_err(&usb_dev->dev, "got retval %d when checking write\n",
- *data);
+ hid_err(usb_dev, "got retval %d when checking write\n", *data);
kfree(data);
return -EIO;
}
@@ -556,7 +555,7 @@
retval = kone_set_settings(usb_dev, &kone->settings);
if (retval) {
- dev_err(&usb_dev->dev, "couldn't set tcu state\n");
+ hid_err(usb_dev, "couldn't set tcu state\n");
/*
* try to reread valid settings into buffer overwriting
* first error code
@@ -570,7 +569,7 @@
retval = size;
exit_no_settings:
- dev_err(&usb_dev->dev, "couldn't read settings\n");
+ hid_err(usb_dev, "couldn't read settings\n");
exit_unlock:
mutex_unlock(&kone->kone_lock);
return retval;
@@ -818,21 +817,20 @@
kone = kzalloc(sizeof(*kone), GFP_KERNEL);
if (!kone) {
- dev_err(&hdev->dev, "can't alloc device descriptor\n");
+ hid_err(hdev, "can't alloc device descriptor\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, kone);
retval = kone_init_kone_device_struct(usb_dev, kone);
if (retval) {
- dev_err(&hdev->dev,
- "couldn't init struct kone_device\n");
+ hid_err(hdev, "couldn't init struct kone_device\n");
goto exit_free;
}
retval = roccat_connect(hdev);
if (retval < 0) {
- dev_err(&hdev->dev, "couldn't init char dev\n");
+ hid_err(hdev, "couldn't init char dev\n");
/* be tolerant about not getting chrdev */
} else {
kone->roccat_claimed = 1;
@@ -841,7 +839,7 @@
retval = kone_create_sysfs_attributes(intf);
if (retval) {
- dev_err(&hdev->dev, "cannot create sysfs files\n");
+ hid_err(hdev, "cannot create sysfs files\n");
goto exit_free;
}
} else {
@@ -876,19 +874,19 @@
retval = hid_parse(hdev);
if (retval) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto exit;
}
retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (retval) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto exit;
}
retval = kone_init_specials(hdev);
if (retval) {
- dev_err(&hdev->dev, "couldn't install mouse\n");
+ hid_err(hdev, "couldn't install mouse\n");
goto exit_stop;
}
diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c
index 9bf2304..e7b4aff 100644
--- a/drivers/hid/hid-roccat-pyra.c
+++ b/drivers/hid/hid-roccat-pyra.c
@@ -87,9 +87,8 @@
control.value == 1)
return 0;
else {
- dev_err(&usb_dev->dev, "receive control status: "
- "unknown response 0x%x 0x%x\n",
- control.request, control.value);
+ hid_err(usb_dev, "receive control status: unknown response 0x%x 0x%x\n",
+ control.request, control.value);
return -EINVAL;
}
}
@@ -770,21 +769,20 @@
pyra = kzalloc(sizeof(*pyra), GFP_KERNEL);
if (!pyra) {
- dev_err(&hdev->dev, "can't alloc device descriptor\n");
+ hid_err(hdev, "can't alloc device descriptor\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, pyra);
retval = pyra_init_pyra_device_struct(usb_dev, pyra);
if (retval) {
- dev_err(&hdev->dev,
- "couldn't init struct pyra_device\n");
+ hid_err(hdev, "couldn't init struct pyra_device\n");
goto exit_free;
}
retval = roccat_connect(hdev);
if (retval < 0) {
- dev_err(&hdev->dev, "couldn't init char dev\n");
+ hid_err(hdev, "couldn't init char dev\n");
} else {
pyra->chrdev_minor = retval;
pyra->roccat_claimed = 1;
@@ -792,7 +790,7 @@
retval = pyra_create_sysfs_attributes(intf);
if (retval) {
- dev_err(&hdev->dev, "cannot create sysfs files\n");
+ hid_err(hdev, "cannot create sysfs files\n");
goto exit_free;
}
} else {
@@ -826,19 +824,19 @@
retval = hid_parse(hdev);
if (retval) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto exit;
}
retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (retval) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto exit;
}
retval = pyra_init_specials(hdev);
if (retval) {
- dev_err(&hdev->dev, "couldn't install mouse\n");
+ hid_err(hdev, "couldn't install mouse\n");
goto exit_stop;
}
return 0;
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 5a6879e..4bc7a93 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -21,6 +21,8 @@
* It is inspired by hidraw, but uses only one circular buffer for all readers.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cdev.h>
#include <linux/poll.h>
#include <linux/sched.h>
@@ -165,27 +167,22 @@
mutex_lock(&device->readers_lock);
if (!device) {
- printk(KERN_EMERG "roccat device with minor %d doesn't exist\n",
- minor);
+ pr_emerg("roccat device with minor %d doesn't exist\n", minor);
error = -ENODEV;
goto exit_err;
}
if (!device->open++) {
/* power on device on adding first reader */
- if (device->hid->ll_driver->power) {
- error = device->hid->ll_driver->power(device->hid,
- PM_HINT_FULLON);
- if (error < 0) {
- --device->open;
- goto exit_err;
- }
- }
- error = device->hid->ll_driver->open(device->hid);
+ error = hid_hw_power(device->hid, PM_HINT_FULLON);
if (error < 0) {
- if (device->hid->ll_driver->power)
- device->hid->ll_driver->power(device->hid,
- PM_HINT_NORMAL);
+ --device->open;
+ goto exit_err;
+ }
+
+ error = hid_hw_open(device->hid);
+ if (error < 0) {
+ hid_hw_power(device->hid, PM_HINT_NORMAL);
--device->open;
goto exit_err;
}
@@ -218,8 +215,7 @@
device = devices[minor];
if (!device) {
mutex_unlock(&devices_lock);
- printk(KERN_EMERG "roccat device with minor %d doesn't exist\n",
- minor);
+ pr_emerg("roccat device with minor %d doesn't exist\n", minor);
return -ENODEV;
}
@@ -231,10 +227,8 @@
if (!--device->open) {
/* removing last reader */
if (device->exist) {
- if (device->hid->ll_driver->power)
- device->hid->ll_driver->power(device->hid,
- PM_HINT_NORMAL);
- device->hid->ll_driver->close(device->hid);
+ hid_hw_power(device->hid, PM_HINT_NORMAL);
+ hid_hw_close(device->hid);
} else {
kfree(device);
}
@@ -370,7 +364,7 @@
device_destroy(roccat_class, MKDEV(roccat_major, minor));
if (device->open) {
- device->hid->ll_driver->close(device->hid);
+ hid_hw_close(device->hid);
wake_up_interruptible(&device->wait);
} else {
kfree(device);
@@ -398,7 +392,7 @@
roccat_major = MAJOR(dev_id);
if (retval < 0) {
- printk(KERN_WARNING "roccat: can't get major number\n");
+ pr_warn("can't get major number\n");
return retval;
}
diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c
index 3589444..3c1fd8a 100644
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -57,8 +57,8 @@
static inline void samsung_irda_dev_trace(struct hid_device *hdev,
unsigned int rsize)
{
- dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
- "descriptor\n", rsize);
+ hid_info(hdev, "fixing up Samsung IrDA %d byte report descriptor\n",
+ rsize);
}
static __u8 *samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc,
@@ -160,7 +160,7 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
@@ -174,7 +174,7 @@
ret = hid_hw_start(hdev, cmask);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
index e10a768..16f7caf 100644
--- a/drivers/hid/hid-sjoy.c
+++ b/drivers/hid/hid-sjoy.c
@@ -74,26 +74,25 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output reports found\n");
+ hid_err(hid, "no output reports found\n");
return -ENODEV;
}
report_ptr = report_ptr->next;
if (report_ptr == report_list) {
- dev_err(&hid->dev, "required output report is "
- "missing\n");
+ hid_err(hid, "required output report is missing\n");
return -ENODEV;
}
report = list_entry(report_ptr, struct hid_report, list);
if (report->maxfield < 1) {
- dev_err(&hid->dev, "no fields in the report\n");
+ hid_err(hid, "no fields in the report\n");
return -ENODEV;
}
if (report->field[0]->report_count < 3) {
- dev_err(&hid->dev, "not enough values in the field\n");
+ hid_err(hid, "not enough values in the field\n");
return -ENODEV;
}
@@ -117,8 +116,7 @@
sjoyff->report->field[0]->value[2] = 0x00;
usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
- dev_info(&hid->dev,
- "Force feedback for SmartJoy PLUS PS2/USB adapter\n");
+ hid_info(hid, "Force feedback for SmartJoy PLUS PS2/USB adapter\n");
return 0;
}
@@ -135,13 +133,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 677bb3d..68d7b36 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -40,8 +40,7 @@
if ((sc->quirks & VAIO_RDESC_CONSTANT) &&
*rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) {
- dev_info(&hdev->dev, "Fixing up Sony Vaio VGX report "
- "descriptor\n");
+ hid_info(hdev, "Fixing up Sony Vaio VGX report descriptor\n");
rdesc[55] = 0x06;
}
return rdesc;
@@ -89,7 +88,7 @@
(3 << 8) | 0xf2, ifnum, buf, 17,
USB_CTRL_GET_TIMEOUT);
if (ret < 0)
- dev_err(&hdev->dev, "can't set operational mode\n");
+ hid_err(hdev, "can't set operational mode\n");
kfree(buf);
@@ -110,7 +109,7 @@
sc = kzalloc(sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
- dev_err(&hdev->dev, "can't alloc sony descriptor\n");
+ hid_err(hdev, "can't alloc sony descriptor\n");
return -ENOMEM;
}
@@ -119,14 +118,14 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
HID_CONNECT_HIDDEV_FORCE);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c
index 3171be2..b2be1d1 100644
--- a/drivers/hid/hid-stantum.c
+++ b/drivers/hid/hid-stantum.c
@@ -222,7 +222,7 @@
sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
if (!sd) {
- dev_err(&hdev->dev, "cannot allocate Stantum data\n");
+ hid_err(hdev, "cannot allocate Stantum data\n");
return -ENOMEM;
}
sd->valid = false;
diff --git a/drivers/hid/hid-sunplus.c b/drivers/hid/hid-sunplus.c
index 164ed56..d484a00 100644
--- a/drivers/hid/hid-sunplus.c
+++ b/drivers/hid/hid-sunplus.c
@@ -27,8 +27,7 @@
{
if (*rsize >= 107 && rdesc[104] == 0x26 && rdesc[105] == 0x80 &&
rdesc[106] == 0x03) {
- dev_info(&hdev->dev, "fixing up Sunplus Wireless Desktop "
- "report descriptor\n");
+ hid_info(hdev, "fixing up Sunplus Wireless Desktop report descriptor\n");
rdesc[105] = rdesc[110] = 0x03;
rdesc[106] = rdesc[111] = 0x21;
}
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 25be4e1..575862b 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -151,28 +151,23 @@
switch (field->usage[0].hid) {
case THRUSTMASTER_USAGE_FF:
if (field->report_count < 2) {
- dev_warn(&hid->dev, "ignoring FF field "
- "with report_count < 2\n");
+ hid_warn(hid, "ignoring FF field with report_count < 2\n");
continue;
}
if (field->logical_maximum ==
field->logical_minimum) {
- dev_warn(&hid->dev, "ignoring FF field "
- "with logical_maximum "
- "== logical_minimum\n");
+ hid_warn(hid, "ignoring FF field with logical_maximum == logical_minimum\n");
continue;
}
if (tmff->report && tmff->report != report) {
- dev_warn(&hid->dev, "ignoring FF field "
- "in other report\n");
+ hid_warn(hid, "ignoring FF field in other report\n");
continue;
}
if (tmff->ff_field && tmff->ff_field != field) {
- dev_warn(&hid->dev, "ignoring "
- "duplicate FF field\n");
+ hid_warn(hid, "ignoring duplicate FF field\n");
continue;
}
@@ -185,16 +180,15 @@
break;
default:
- dev_warn(&hid->dev, "ignoring unknown output "
- "usage %08x\n",
- field->usage[0].hid);
+ hid_warn(hid, "ignoring unknown output usage %08x\n",
+ field->usage[0].hid);
continue;
}
}
}
if (!tmff->report) {
- dev_err(&hid->dev, "can't find FF field in output reports\n");
+ hid_err(hid, "can't find FF field in output reports\n");
error = -ENODEV;
goto fail;
}
@@ -203,8 +197,7 @@
if (error)
goto fail;
- dev_info(&hid->dev, "force feedback for ThrustMaster devices by Zinx "
- "Verituse <zinx@epicsol.org>");
+ hid_info(hid, "force feedback for ThrustMaster devices by Zinx Verituse <zinx@epicsol.org>\n");
return 0;
fail:
@@ -224,13 +217,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-topseed.c b/drivers/hid/hid-topseed.c
index 956ed9a..613ff7b 100644
--- a/drivers/hid/hid-topseed.c
+++ b/drivers/hid/hid-topseed.c
@@ -66,6 +66,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
{ }
};
MODULE_DEVICE_TABLE(hid, ts_devices);
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 724f46e..0688832 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -18,6 +18,8 @@
* any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
@@ -141,8 +143,8 @@
* Note that if the raw queries fail, it's not a hard failure and it
* is safe to continue
*/
- dev_warn(&hdev->dev, "failed to poke device, command %d, err %d\n",
- rep_data[0], ret);
+ hid_warn(hdev, "failed to poke device, command %d, err %d\n",
+ rep_data[0], ret);
return;
}
@@ -172,7 +174,7 @@
return -EINVAL;
}
-static DEVICE_ATTR(speed, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP,
wacom_show_speed, wacom_store_speed);
static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
@@ -312,7 +314,7 @@
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
- dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
+ hid_err(hdev, "can't alloc wacom descriptor\n");
return -ENOMEM;
}
@@ -321,20 +323,20 @@
/* Parse the HID report now */
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
ret = device_create_file(&hdev->dev, &dev_attr_speed);
if (ret)
- dev_warn(&hdev->dev,
- "can't create sysfs speed attribute err: %d\n", ret);
+ hid_warn(hdev,
+ "can't create sysfs speed attribute err: %d\n", ret);
/* Set Wacom mode 2 with high reporting speed */
wacom_poke(hdev, 1);
@@ -349,8 +351,8 @@
ret = power_supply_register(&hdev->dev, &wdata->battery);
if (ret) {
- dev_warn(&hdev->dev,
- "can't create sysfs battery attribute, err: %d\n", ret);
+ hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
+ ret);
/*
* battery attribute is not critical for the tablet, but if it
* failed then there is no need to create ac attribute
@@ -367,8 +369,8 @@
ret = power_supply_register(&hdev->dev, &wdata->ac);
if (ret) {
- dev_warn(&hdev->dev,
- "can't create ac battery attribute, err: %d\n", ret);
+ hid_warn(hdev,
+ "can't create ac battery attribute, err: %d\n", ret);
/*
* ac attribute is not critical for the tablet, but if it
* failed then we don't want to battery attribute to exist
@@ -454,7 +456,7 @@
ret = hid_register_driver(&wacom_driver);
if (ret)
- printk(KERN_ERR "can't register wacom driver\n");
+ pr_err("can't register wacom driver\n");
return ret;
}
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index b7accea..f31fab0 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -75,14 +75,14 @@
int error;
if (list_empty(report_list)) {
- dev_err(&hid->dev, "no output report found\n");
+ hid_err(hid, "no output report found\n");
return -ENODEV;
}
report = list_entry(report_list->next, struct hid_report, list);
if (report->maxfield < 4) {
- dev_err(&hid->dev, "not enough fields in report\n");
+ hid_err(hid, "not enough fields in report\n");
return -ENODEV;
}
@@ -105,8 +105,7 @@
zpff->report->field[3]->value[0] = 0x00;
usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
- dev_info(&hid->dev, "force feedback for Zeroplus based devices by "
- "Anssi Hannula <anssi.hannula@gmail.com>\n");
+ hid_info(hid, "force feedback for Zeroplus based devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
return 0;
}
@@ -123,13 +122,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
- dev_err(&hdev->dev, "hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err;
}
diff --git a/drivers/hid/hid-zydacron.c b/drivers/hid/hid-zydacron.c
index aac1f92..e903715 100644
--- a/drivers/hid/hid-zydacron.c
+++ b/drivers/hid/hid-zydacron.c
@@ -34,9 +34,8 @@
rdesc[0x96] == 0xbc && rdesc[0x97] == 0xff &&
rdesc[0xca] == 0xbc && rdesc[0xcb] == 0xff &&
rdesc[0xe1] == 0xbc && rdesc[0xe2] == 0xff) {
- dev_info(&hdev->dev,
- "fixing up zydacron remote control report "
- "descriptor\n");
+ hid_info(hdev,
+ "fixing up zydacron remote control report descriptor\n");
rdesc[0x96] = rdesc[0xca] = rdesc[0xe1] = 0x0c;
rdesc[0x97] = rdesc[0xcb] = rdesc[0xe2] = 0x00;
}
@@ -172,7 +171,7 @@
zc = kzalloc(sizeof(*zc), GFP_KERNEL);
if (zc == NULL) {
- dev_err(&hdev->dev, "zydacron: can't alloc descriptor\n");
+ hid_err(hdev, "can't alloc descriptor\n");
return -ENOMEM;
}
@@ -180,13 +179,13 @@
ret = hid_parse(hdev);
if (ret) {
- dev_err(&hdev->dev, "zydacron: parse failed\n");
+ hid_err(hdev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
- dev_err(&hdev->dev, "zydacron: hw start failed\n");
+ hid_err(hdev, "hw start failed\n");
goto err_free;
}
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index e1f0748..468e87b 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -19,6 +19,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/errno.h>
@@ -122,15 +124,15 @@
}
if (count > HID_MAX_BUFFER_SIZE) {
- printk(KERN_WARNING "hidraw: pid %d passed too large report\n",
- task_pid_nr(current));
+ hid_warn(dev, "pid %d passed too large report\n",
+ task_pid_nr(current));
ret = -EINVAL;
goto out;
}
if (count < 2) {
- printk(KERN_WARNING "hidraw: pid %d passed too short report\n",
- task_pid_nr(current));
+ hid_warn(dev, "pid %d passed too short report\n",
+ task_pid_nr(current));
ret = -EINVAL;
goto out;
}
@@ -192,15 +194,13 @@
dev = hidraw_table[minor];
if (!dev->open++) {
- if (dev->hid->ll_driver->power) {
- err = dev->hid->ll_driver->power(dev->hid, PM_HINT_FULLON);
- if (err < 0)
- goto out_unlock;
- }
- err = dev->hid->ll_driver->open(dev->hid);
+ err = hid_hw_power(dev->hid, PM_HINT_FULLON);
+ if (err < 0)
+ goto out_unlock;
+
+ err = hid_hw_open(dev->hid);
if (err < 0) {
- if (dev->hid->ll_driver->power)
- dev->hid->ll_driver->power(dev->hid, PM_HINT_NORMAL);
+ hid_hw_power(dev->hid, PM_HINT_NORMAL);
dev->open--;
}
}
@@ -229,9 +229,8 @@
dev = hidraw_table[minor];
if (!--dev->open) {
if (list->hidraw->exist) {
- if (dev->hid->ll_driver->power)
- dev->hid->ll_driver->power(dev->hid, PM_HINT_NORMAL);
- dev->hid->ll_driver->close(dev->hid);
+ hid_hw_power(dev->hid, PM_HINT_NORMAL);
+ hid_hw_close(dev->hid);
} else {
kfree(list->hidraw);
}
@@ -345,6 +344,9 @@
.open = hidraw_open,
.release = hidraw_release,
.unlocked_ioctl = hidraw_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = hidraw_ioctl,
+#endif
.llseek = noop_llseek,
};
@@ -433,7 +435,7 @@
device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
if (hidraw->open) {
- hid->ll_driver->close(hid);
+ hid_hw_close(hid);
wake_up_interruptible(&hidraw->wait);
} else {
kfree(hidraw);
@@ -452,7 +454,7 @@
hidraw_major = MAJOR(dev_id);
if (result < 0) {
- printk(KERN_WARNING "hidraw: can't get major number\n");
+ pr_warn("can't get major number\n");
result = 0;
goto out;
}
diff --git a/drivers/hid/usbhid/Makefile b/drivers/hid/usbhid/Makefile
index 1329ecb..db3cf31 100644
--- a/drivers/hid/usbhid/Makefile
+++ b/drivers/hid/usbhid/Makefile
@@ -3,15 +3,15 @@
#
# Multipart objects.
-usbhid-objs := hid-core.o hid-quirks.o
+usbhid-y := hid-core.o hid-quirks.o
# Optional parts of multipart objects.
ifeq ($(CONFIG_USB_HIDDEV),y)
- usbhid-objs += hiddev.o
+ usbhid-y += hiddev.o
endif
ifeq ($(CONFIG_HID_PID),y)
- usbhid-objs += hid-pidff.o
+ usbhid-y += hid-pidff.o
endif
obj-$(CONFIG_USB_HID) += usbhid.o
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 5489eab..b336dd8 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -67,7 +67,6 @@
* Input submission and I/O error handler.
*/
static DEFINE_MUTEX(hid_open_mut);
-static struct workqueue_struct *resumption_waker;
static void hid_io_error(struct hid_device *hid);
static int hid_submit_out(struct hid_device *hid);
@@ -136,10 +135,10 @@
hid_io_error(hid);
break;
default:
- err_hid("can't reset device, %s-%s/input%d, status %d",
- hid_to_usb_dev(hid)->bus->bus_name,
- hid_to_usb_dev(hid)->devpath,
- usbhid->ifnum, rc);
+ hid_err(hid, "can't reset device, %s-%s/input%d, status %d\n",
+ hid_to_usb_dev(hid)->bus->bus_name,
+ hid_to_usb_dev(hid)->devpath,
+ usbhid->ifnum, rc);
/* FALLTHROUGH */
case -EHOSTUNREACH:
case -ENODEV:
@@ -278,18 +277,18 @@
hid_io_error(hid);
return;
default: /* error */
- dev_warn(&urb->dev->dev, "input irq status %d "
- "received\n", urb->status);
+ hid_warn(urb->dev, "input irq status %d received\n",
+ urb->status);
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
if (status != -EPERM) {
- err_hid("can't resubmit intr, %s-%s/input%d, status %d",
- hid_to_usb_dev(hid)->bus->bus_name,
- hid_to_usb_dev(hid)->devpath,
- usbhid->ifnum, status);
+ hid_err(hid, "can't resubmit intr, %s-%s/input%d, status %d\n",
+ hid_to_usb_dev(hid)->bus->bus_name,
+ hid_to_usb_dev(hid)->devpath,
+ usbhid->ifnum, status);
hid_io_error(hid);
}
}
@@ -300,10 +299,19 @@
struct hid_report *report;
char *raw_report;
struct usbhid_device *usbhid = hid->driver_data;
+ int r;
report = usbhid->out[usbhid->outtail].report;
raw_report = usbhid->out[usbhid->outtail].raw_report;
+ r = usb_autopm_get_interface_async(usbhid->intf);
+ if (r < 0)
+ return -1;
+
+ /*
+ * if the device hasn't been woken, we leave the output
+ * to resume()
+ */
if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
usbhid->urbout->dev = hid_to_usb_dev(hid);
@@ -313,17 +321,11 @@
dbg_hid("submitting out urb\n");
if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
- err_hid("usb_submit_urb(out) failed");
+ hid_err(hid, "usb_submit_urb(out) failed\n");
+ usb_autopm_put_interface_async(usbhid->intf);
return -1;
}
usbhid->last_out = jiffies;
- } else {
- /*
- * queue work to wake up the device.
- * as the work queue is freezeable, this is safe
- * with respect to STD and STR
- */
- queue_work(resumption_waker, &usbhid->restart_work);
}
return 0;
@@ -334,13 +336,16 @@
struct hid_report *report;
unsigned char dir;
char *raw_report;
- int len;
+ int len, r;
struct usbhid_device *usbhid = hid->driver_data;
report = usbhid->ctrl[usbhid->ctrltail].report;
raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
dir = usbhid->ctrl[usbhid->ctrltail].dir;
+ r = usb_autopm_get_interface_async(usbhid->intf);
+ if (r < 0)
+ return -1;
if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
if (dir == USB_DIR_OUT) {
@@ -375,17 +380,11 @@
usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
- err_hid("usb_submit_urb(ctrl) failed");
+ usb_autopm_put_interface_async(usbhid->intf);
+ hid_err(hid, "usb_submit_urb(ctrl) failed\n");
return -1;
}
usbhid->last_ctrl = jiffies;
- } else {
- /*
- * queue work to wake up the device.
- * as the work queue is freezeable, this is safe
- * with respect to STD and STR
- */
- queue_work(resumption_waker, &usbhid->restart_work);
}
return 0;
@@ -413,8 +412,8 @@
case -ENOENT:
break;
default: /* error */
- dev_warn(&urb->dev->dev, "output irq status %d "
- "received\n", urb->status);
+ hid_warn(urb->dev, "output irq status %d received\n",
+ urb->status);
}
spin_lock_irqsave(&usbhid->lock, flags);
@@ -435,6 +434,7 @@
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
spin_unlock_irqrestore(&usbhid->lock, flags);
+ usb_autopm_put_interface_async(usbhid->intf);
wake_up(&usbhid->wait);
}
@@ -466,8 +466,7 @@
case -EPIPE: /* report not available */
break;
default: /* error */
- dev_warn(&urb->dev->dev, "ctrl urb status %d "
- "received\n", status);
+ hid_warn(urb->dev, "ctrl urb status %d received\n", status);
}
if (unplug)
@@ -481,11 +480,13 @@
wake_up(&usbhid->wait);
}
spin_unlock(&usbhid->lock);
+ usb_autopm_put_interface_async(usbhid->intf);
return;
}
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
spin_unlock(&usbhid->lock);
+ usb_autopm_put_interface_async(usbhid->intf);
wake_up(&usbhid->wait);
}
@@ -501,13 +502,13 @@
if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
- dev_warn(&hid->dev, "output queue full\n");
+ hid_warn(hid, "output queue full\n");
return;
}
usbhid->out[usbhid->outhead].raw_report = kmalloc(len, GFP_ATOMIC);
if (!usbhid->out[usbhid->outhead].raw_report) {
- dev_warn(&hid->dev, "output queueing failed\n");
+ hid_warn(hid, "output queueing failed\n");
return;
}
hid_output_report(report, usbhid->out[usbhid->outhead].raw_report);
@@ -532,14 +533,14 @@
}
if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
- dev_warn(&hid->dev, "control queue full\n");
+ hid_warn(hid, "control queue full\n");
return;
}
if (dir == USB_DIR_OUT) {
usbhid->ctrl[usbhid->ctrlhead].raw_report = kmalloc(len, GFP_ATOMIC);
if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) {
- dev_warn(&hid->dev, "control queueing failed\n");
+ hid_warn(hid, "control queueing failed\n");
return;
}
hid_output_report(report, usbhid->ctrl[usbhid->ctrlhead].raw_report);
@@ -590,7 +591,7 @@
return -1;
if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
- dev_warn(&dev->dev, "event field not found\n");
+ hid_warn(dev, "event field not found\n");
return -1;
}
@@ -656,7 +657,7 @@
mutex_lock(&hid_open_mut);
if (!hid->open++) {
res = usb_autopm_get_interface(usbhid->intf);
- /* the device must be awake to reliable request remote wakeup */
+ /* the device must be awake to reliably request remote wakeup */
if (res < 0) {
hid->open--;
mutex_unlock(&hid_open_mut);
@@ -722,7 +723,7 @@
}
if (err)
- dev_warn(&hid->dev, "timeout initializing reports\n");
+ hid_warn(hid, "timeout initializing reports\n");
}
/*
@@ -857,18 +858,6 @@
usbhid_restart_ctrl_queue(usbhid);
}
-static void __usbhid_restart_queues(struct work_struct *work)
-{
- struct usbhid_device *usbhid =
- container_of(work, struct usbhid_device, restart_work);
- int r;
-
- r = usb_autopm_get_interface(usbhid->intf);
- if (r < 0)
- return;
- usb_autopm_put_interface(usbhid->intf);
-}
-
static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
@@ -1140,8 +1129,7 @@
if (usb_endpoint_is_int_in(&interface->endpoint[n].desc))
has_in++;
if (!has_in) {
- dev_err(&intf->dev, "couldn't find an input interrupt "
- "endpoint\n");
+ hid_err(intf, "couldn't find an input interrupt endpoint\n");
return -ENODEV;
}
@@ -1206,14 +1194,13 @@
init_waitqueue_head(&usbhid->wait);
INIT_WORK(&usbhid->reset_work, hid_reset);
- INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
spin_lock_init(&usbhid->lock);
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
- dev_err(&intf->dev, "can't add hid device: %d\n", ret);
+ hid_err(intf, "can't add hid device: %d\n", ret);
goto err_free;
}
@@ -1241,7 +1228,6 @@
static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid)
{
del_timer_sync(&usbhid->io_retry);
- cancel_work_sync(&usbhid->restart_work);
cancel_work_sync(&usbhid->reset_work);
}
@@ -1262,7 +1248,6 @@
spin_lock_irq(&usbhid->lock);
set_bit(HID_RESET_PENDING, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
- cancel_work_sync(&usbhid->restart_work);
hid_cease_io(usbhid);
return 0;
@@ -1461,9 +1446,6 @@
{
int retval = -ENOMEM;
- resumption_waker = create_freezeable_workqueue("usbhid_resumer");
- if (!resumption_waker)
- goto no_queue;
retval = hid_register_driver(&hid_usb_driver);
if (retval)
goto hid_register_fail;
@@ -1481,8 +1463,6 @@
usbhid_quirks_init_fail:
hid_unregister_driver(&hid_usb_driver);
hid_register_fail:
- destroy_workqueue(resumption_waker);
-no_queue:
return retval;
}
@@ -1491,7 +1471,6 @@
usb_deregister(&hid_driver);
usbhid_quirks_exit();
hid_unregister_driver(&hid_usb_driver);
- destroy_workqueue(resumption_waker);
}
module_init(hid_init);
diff --git a/drivers/hid/usbhid/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c
index ef381d7..f91c136 100644
--- a/drivers/hid/usbhid/hid-pidff.c
+++ b/drivers/hid/usbhid/hid-pidff.c
@@ -22,7 +22,7 @@
/* #define DEBUG */
-#define debug(format, arg...) pr_debug("hid-pidff: " format "\n" , ## arg)
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/input.h>
#include <linux/slab.h>
@@ -220,7 +220,7 @@
static void pidff_set(struct pidff_usage *usage, u16 value)
{
usage->value[0] = pidff_rescale(value, 0xffff, usage->field);
- debug("calculated from %d to %d", value, usage->value[0]);
+ pr_debug("calculated from %d to %d\n", value, usage->value[0]);
}
static void pidff_set_signed(struct pidff_usage *usage, s16 value)
@@ -235,7 +235,7 @@
usage->value[0] =
pidff_rescale(value, 0x7fff, usage->field);
}
- debug("calculated from %d to %d", value, usage->value[0]);
+ pr_debug("calculated from %d to %d\n", value, usage->value[0]);
}
/*
@@ -259,8 +259,9 @@
pidff->set_envelope[PID_ATTACK_TIME].value[0] = envelope->attack_length;
pidff->set_envelope[PID_FADE_TIME].value[0] = envelope->fade_length;
- debug("attack %u => %d", envelope->attack_level,
- pidff->set_envelope[PID_ATTACK_LEVEL].value[0]);
+ hid_dbg(pidff->hid, "attack %u => %d\n",
+ envelope->attack_level,
+ pidff->set_envelope[PID_ATTACK_LEVEL].value[0]);
usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
USB_DIR_OUT);
@@ -466,33 +467,33 @@
pidff->create_new_effect_type->value[0] = efnum;
usbhid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
USB_DIR_OUT);
- debug("create_new_effect sent, type: %d", efnum);
+ hid_dbg(pidff->hid, "create_new_effect sent, type: %d\n", efnum);
pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0;
pidff->block_load_status->value[0] = 0;
usbhid_wait_io(pidff->hid);
for (j = 0; j < 60; j++) {
- debug("pid_block_load requested");
+ hid_dbg(pidff->hid, "pid_block_load requested\n");
usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
USB_DIR_IN);
usbhid_wait_io(pidff->hid);
if (pidff->block_load_status->value[0] ==
pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) {
- debug("device reported free memory: %d bytes",
- pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
- pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1);
+ hid_dbg(pidff->hid, "device reported free memory: %d bytes\n",
+ pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
+ pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1);
return 0;
}
if (pidff->block_load_status->value[0] ==
pidff->status_id[PID_BLOCK_LOAD_FULL]) {
- debug("not enough memory free: %d bytes",
- pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
+ hid_dbg(pidff->hid, "not enough memory free: %d bytes\n",
+ pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1);
return -ENOSPC;
}
}
- printk(KERN_ERR "hid-pidff: pid_block_load failed 60 times\n");
+ hid_err(pidff->hid, "pid_block_load failed 60 times\n");
return -EIO;
}
@@ -546,7 +547,8 @@
struct pidff_device *pidff = dev->ff->private;
int pid_id = pidff->pid_id[effect_id];
- debug("starting to erase %d/%d", effect_id, pidff->pid_id[effect_id]);
+ hid_dbg(pidff->hid, "starting to erase %d/%d\n",
+ effect_id, pidff->pid_id[effect_id]);
/* Wait for the queue to clear. We do not want a full fifo to
prevent the effect removal. */
usbhid_wait_io(pidff->hid);
@@ -604,8 +606,7 @@
type_id = PID_SAW_DOWN;
break;
default:
- printk(KERN_ERR
- "hid-pidff: invalid waveform\n");
+ hid_err(pidff->hid, "invalid waveform\n");
return -EINVAL;
}
@@ -696,7 +697,7 @@
break;
default:
- printk(KERN_ERR "hid-pidff: invalid type\n");
+ hid_err(pidff->hid, "invalid type\n");
return -EINVAL;
}
@@ -704,7 +705,7 @@
pidff->pid_id[effect->id] =
pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
- debug("uploaded");
+ hid_dbg(pidff->hid, "uploaded\n");
return 0;
}
@@ -770,14 +771,14 @@
for (i = 0; i < report->maxfield; i++) {
if (report->field[i]->maxusage !=
report->field[i]->report_count) {
- debug("maxusage and report_count do not match, "
- "skipping");
+ pr_debug("maxusage and report_count do not match, skipping\n");
continue;
}
for (j = 0; j < report->field[i]->maxusage; j++) {
if (report->field[i]->usage[j].hid ==
(HID_UP_PID | table[k])) {
- debug("found %d at %d->%d", k, i, j);
+ pr_debug("found %d at %d->%d\n",
+ k, i, j);
usage[k].field = report->field[i];
usage[k].value =
&report->field[i]->value[j];
@@ -789,7 +790,7 @@
break;
}
if (!found && strict) {
- debug("failed to locate %d", k);
+ pr_debug("failed to locate %d\n", k);
return -1;
}
}
@@ -826,8 +827,8 @@
continue;
ret = pidff_check_usage(report->field[0]->logical);
if (ret != -1) {
- debug("found usage 0x%02x from field->logical",
- pidff_reports[ret]);
+ hid_dbg(hid, "found usage 0x%02x from field->logical\n",
+ pidff_reports[ret]);
pidff->reports[ret] = report;
continue;
}
@@ -845,8 +846,9 @@
continue;
ret = pidff_check_usage(hid->collection[i - 1].usage);
if (ret != -1 && !pidff->reports[ret]) {
- debug("found usage 0x%02x from collection array",
- pidff_reports[ret]);
+ hid_dbg(hid,
+ "found usage 0x%02x from collection array\n",
+ pidff_reports[ret]);
pidff->reports[ret] = report;
}
}
@@ -861,7 +863,7 @@
for (i = 0; i <= PID_REQUIRED_REPORTS; i++) {
if (!pidff->reports[i]) {
- debug("%d missing", i);
+ hid_dbg(pidff->hid, "%d missing\n", i);
return 0;
}
}
@@ -884,8 +886,7 @@
report->field[i]->logical_minimum == 1)
return report->field[i];
else {
- printk(KERN_ERR "hid-pidff: logical_minimum "
- "is not 1 as it should be\n");
+ pr_err("logical_minimum is not 1 as it should be\n");
return NULL;
}
}
@@ -924,7 +925,7 @@
*/
static int pidff_find_special_fields(struct pidff_device *pidff)
{
- debug("finding special fields");
+ hid_dbg(pidff->hid, "finding special fields\n");
pidff->create_new_effect_type =
pidff_find_special_field(pidff->reports[PID_CREATE_NEW_EFFECT],
@@ -945,32 +946,30 @@
pidff_find_special_field(pidff->reports[PID_EFFECT_OPERATION],
0x78, 1);
- debug("search done");
+ hid_dbg(pidff->hid, "search done\n");
if (!pidff->create_new_effect_type || !pidff->set_effect_type) {
- printk(KERN_ERR "hid-pidff: effect lists not found\n");
+ hid_err(pidff->hid, "effect lists not found\n");
return -1;
}
if (!pidff->effect_direction) {
- printk(KERN_ERR "hid-pidff: direction field not found\n");
+ hid_err(pidff->hid, "direction field not found\n");
return -1;
}
if (!pidff->device_control) {
- printk(KERN_ERR "hid-pidff: device control field not found\n");
+ hid_err(pidff->hid, "device control field not found\n");
return -1;
}
if (!pidff->block_load_status) {
- printk(KERN_ERR
- "hid-pidff: block load status field not found\n");
+ hid_err(pidff->hid, "block load status field not found\n");
return -1;
}
if (!pidff->effect_operation_status) {
- printk(KERN_ERR
- "hid-pidff: effect operation field not found\n");
+ hid_err(pidff->hid, "effect operation field not found\n");
return -1;
}
@@ -982,23 +981,22 @@
if (!PIDFF_FIND_SPECIAL_KEYS(type_id, create_new_effect_type,
effect_types)) {
- printk(KERN_ERR "hid-pidff: no effect types found\n");
+ hid_err(pidff->hid, "no effect types found\n");
return -1;
}
if (PIDFF_FIND_SPECIAL_KEYS(status_id, block_load_status,
block_load_status) !=
sizeof(pidff_block_load_status)) {
- printk(KERN_ERR
- "hidpidff: block load status identifiers not found\n");
+ hid_err(pidff->hid,
+ "block load status identifiers not found\n");
return -1;
}
if (PIDFF_FIND_SPECIAL_KEYS(operation_id, effect_operation_status,
effect_operation_status) !=
sizeof(pidff_effect_operation_status)) {
- printk(KERN_ERR
- "hidpidff: effect operation identifiers not found\n");
+ hid_err(pidff->hid, "effect operation identifiers not found\n");
return -1;
}
@@ -1017,8 +1015,8 @@
int pidff_type = pidff->type_id[i];
if (pidff->set_effect_type->usage[pidff_type].hid !=
pidff->create_new_effect_type->usage[pidff_type].hid) {
- printk(KERN_ERR "hid-pidff: "
- "effect type number %d is invalid\n", i);
+ hid_err(pidff->hid,
+ "effect type number %d is invalid\n", i);
return -1;
}
}
@@ -1073,27 +1071,23 @@
int envelope_ok = 0;
if (PIDFF_FIND_FIELDS(set_effect, PID_SET_EFFECT, 1)) {
- printk(KERN_ERR
- "hid-pidff: unknown set_effect report layout\n");
+ hid_err(pidff->hid, "unknown set_effect report layout\n");
return -ENODEV;
}
PIDFF_FIND_FIELDS(block_load, PID_BLOCK_LOAD, 0);
if (!pidff->block_load[PID_EFFECT_BLOCK_INDEX].value) {
- printk(KERN_ERR
- "hid-pidff: unknown pid_block_load report layout\n");
+ hid_err(pidff->hid, "unknown pid_block_load report layout\n");
return -ENODEV;
}
if (PIDFF_FIND_FIELDS(effect_operation, PID_EFFECT_OPERATION, 1)) {
- printk(KERN_ERR
- "hid-pidff: unknown effect_operation report layout\n");
+ hid_err(pidff->hid, "unknown effect_operation report layout\n");
return -ENODEV;
}
if (PIDFF_FIND_FIELDS(block_free, PID_BLOCK_FREE, 1)) {
- printk(KERN_ERR
- "hid-pidff: unknown pid_block_free report layout\n");
+ hid_err(pidff->hid, "unknown pid_block_free report layout\n");
return -ENODEV;
}
@@ -1105,27 +1099,26 @@
if (!envelope_ok) {
if (test_and_clear_bit(FF_CONSTANT, dev->ffbit))
- printk(KERN_WARNING "hid-pidff: "
- "has constant effect but no envelope\n");
+ hid_warn(pidff->hid,
+ "has constant effect but no envelope\n");
if (test_and_clear_bit(FF_RAMP, dev->ffbit))
- printk(KERN_WARNING "hid-pidff: "
- "has ramp effect but no envelope\n");
+ hid_warn(pidff->hid,
+ "has ramp effect but no envelope\n");
if (test_and_clear_bit(FF_PERIODIC, dev->ffbit))
- printk(KERN_WARNING "hid-pidff: "
- "has periodic effect but no envelope\n");
+ hid_warn(pidff->hid,
+ "has periodic effect but no envelope\n");
}
if (test_bit(FF_CONSTANT, dev->ffbit) &&
PIDFF_FIND_FIELDS(set_constant, PID_SET_CONSTANT, 1)) {
- printk(KERN_WARNING
- "hid-pidff: unknown constant effect layout\n");
+ hid_warn(pidff->hid, "unknown constant effect layout\n");
clear_bit(FF_CONSTANT, dev->ffbit);
}
if (test_bit(FF_RAMP, dev->ffbit) &&
PIDFF_FIND_FIELDS(set_ramp, PID_SET_RAMP, 1)) {
- printk(KERN_WARNING "hid-pidff: unknown ramp effect layout\n");
+ hid_warn(pidff->hid, "unknown ramp effect layout\n");
clear_bit(FF_RAMP, dev->ffbit);
}
@@ -1134,8 +1127,7 @@
test_bit(FF_FRICTION, dev->ffbit) ||
test_bit(FF_INERTIA, dev->ffbit)) &&
PIDFF_FIND_FIELDS(set_condition, PID_SET_CONDITION, 1)) {
- printk(KERN_WARNING
- "hid-pidff: unknown condition effect layout\n");
+ hid_warn(pidff->hid, "unknown condition effect layout\n");
clear_bit(FF_SPRING, dev->ffbit);
clear_bit(FF_DAMPER, dev->ffbit);
clear_bit(FF_FRICTION, dev->ffbit);
@@ -1144,8 +1136,7 @@
if (test_bit(FF_PERIODIC, dev->ffbit) &&
PIDFF_FIND_FIELDS(set_periodic, PID_SET_PERIODIC, 1)) {
- printk(KERN_WARNING
- "hid-pidff: unknown periodic effect layout\n");
+ hid_warn(pidff->hid, "unknown periodic effect layout\n");
clear_bit(FF_PERIODIC, dev->ffbit);
}
@@ -1184,12 +1175,12 @@
if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
while (pidff->pool[PID_SIMULTANEOUS_MAX].value[0] < 2) {
if (i++ > 20) {
- printk(KERN_WARNING "hid-pidff: device reports "
- "%d simultaneous effects\n",
- pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
+ hid_warn(pidff->hid,
+ "device reports %d simultaneous effects\n",
+ pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
break;
}
- debug("pid_pool requested again");
+ hid_dbg(pidff->hid, "pid_pool requested again\n");
usbhid_submit_report(hid, pidff->reports[PID_POOL],
USB_DIR_IN);
usbhid_wait_io(hid);
@@ -1215,7 +1206,7 @@
error = pidff_request_effect_upload(pidff, 1);
if (error) {
- printk(KERN_ERR "hid-pidff: upload request failed\n");
+ hid_err(pidff->hid, "upload request failed\n");
return error;
}
@@ -1224,8 +1215,8 @@
pidff_autocenter(pidff, 0xffff);
set_bit(FF_AUTOCENTER, dev->ffbit);
} else {
- printk(KERN_NOTICE "hid-pidff: "
- "device has unknown autocenter control method\n");
+ hid_notice(pidff->hid,
+ "device has unknown autocenter control method\n");
}
pidff_erase_pid(pidff,
@@ -1248,10 +1239,10 @@
int max_effects;
int error;
- debug("starting pid init");
+ hid_dbg(hid, "starting pid init\n");
if (list_empty(&hid->report_enum[HID_OUTPUT_REPORT].report_list)) {
- debug("not a PID device, no output report");
+ hid_dbg(hid, "not a PID device, no output report\n");
return -ENODEV;
}
@@ -1265,7 +1256,7 @@
pidff_find_reports(hid, HID_FEATURE_REPORT, pidff);
if (!pidff_reports_ok(pidff)) {
- debug("reports not ok, aborting");
+ hid_dbg(hid, "reports not ok, aborting\n");
error = -ENODEV;
goto fail;
}
@@ -1278,8 +1269,8 @@
if (test_bit(FF_GAIN, dev->ffbit)) {
pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], 0xffff);
- usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
- USB_DIR_OUT);
+ usbhid_submit_report(hid, pidff->reports[PID_DEVICE_GAIN],
+ USB_DIR_OUT);
}
error = pidff_check_autocenter(pidff, dev);
@@ -1290,23 +1281,23 @@
pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_maximum -
pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum +
1;
- debug("max effects is %d", max_effects);
+ hid_dbg(hid, "max effects is %d\n", max_effects);
if (max_effects > PID_EFFECTS_MAX)
max_effects = PID_EFFECTS_MAX;
if (pidff->pool[PID_SIMULTANEOUS_MAX].value)
- debug("max simultaneous effects is %d",
- pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
+ hid_dbg(hid, "max simultaneous effects is %d\n",
+ pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
if (pidff->pool[PID_RAM_POOL_SIZE].value)
- debug("device memory size is %d bytes",
- pidff->pool[PID_RAM_POOL_SIZE].value[0]);
+ hid_dbg(hid, "device memory size is %d bytes\n",
+ pidff->pool[PID_RAM_POOL_SIZE].value[0]);
if (pidff->pool[PID_DEVICE_MANAGED_POOL].value &&
pidff->pool[PID_DEVICE_MANAGED_POOL].value[0] == 0) {
- printk(KERN_NOTICE "hid-pidff: "
- "device does not support device managed pool\n");
+ hid_notice(hid,
+ "device does not support device managed pool\n");
goto fail;
}
@@ -1322,8 +1313,7 @@
ff->set_autocenter = pidff_set_autocenter;
ff->playback = pidff_playback;
- printk(KERN_INFO "Force feedback for USB HID PID devices by "
- "Anssi Hannula <anssi.hannula@gmail.com>\n");
+ hid_info(dev, "Force feedback for USB HID PID devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
return 0;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 2c18547..76b9a14 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -85,7 +85,7 @@
{ USB_VENDOR_ID_PI_ENGINEERING, USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL, HID_QUIRK_HIDINPUT_FORCE },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT },
-
+ { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT },
{ 0, 0 }
};
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 984feb3..af0a7c1 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -585,163 +585,168 @@
{
struct hiddev_list *list = file->private_data;
struct hiddev *hiddev = list->hiddev;
- struct hid_device *hid = hiddev->hid;
- struct usb_device *dev;
+ struct hid_device *hid;
struct hiddev_collection_info cinfo;
struct hiddev_report_info rinfo;
struct hiddev_field_info finfo;
struct hiddev_devinfo dinfo;
struct hid_report *report;
struct hid_field *field;
- struct usbhid_device *usbhid = hid->driver_data;
void __user *user_arg = (void __user *)arg;
- int i, r;
-
+ int i, r = -EINVAL;
+
/* Called without BKL by compat methods so no BKL taken */
- /* FIXME: Who or what stop this racing with a disconnect ?? */
- if (!hiddev->exist || !hid)
- return -EIO;
+ mutex_lock(&hiddev->existancelock);
+ if (!hiddev->exist) {
+ r = -ENODEV;
+ goto ret_unlock;
+ }
- dev = hid_to_usb_dev(hid);
+ hid = hiddev->hid;
switch (cmd) {
case HIDIOCGVERSION:
- return put_user(HID_VERSION, (int __user *)arg);
+ r = put_user(HID_VERSION, (int __user *)arg) ?
+ -EFAULT : 0;
+ break;
case HIDIOCAPPLICATION:
if (arg < 0 || arg >= hid->maxapplication)
- return -EINVAL;
+ break;
for (i = 0; i < hid->maxcollection; i++)
if (hid->collection[i].type ==
HID_COLLECTION_APPLICATION && arg-- == 0)
break;
- if (i == hid->maxcollection)
- return -EINVAL;
-
- return hid->collection[i].usage;
+ if (i < hid->maxcollection)
+ r = hid->collection[i].usage;
+ break;
case HIDIOCGDEVINFO:
- dinfo.bustype = BUS_USB;
- dinfo.busnum = dev->bus->busnum;
- dinfo.devnum = dev->devnum;
- dinfo.ifnum = usbhid->ifnum;
- dinfo.vendor = le16_to_cpu(dev->descriptor.idVendor);
- dinfo.product = le16_to_cpu(dev->descriptor.idProduct);
- dinfo.version = le16_to_cpu(dev->descriptor.bcdDevice);
- dinfo.num_applications = hid->maxapplication;
- if (copy_to_user(user_arg, &dinfo, sizeof(dinfo)))
- return -EFAULT;
+ {
+ struct usb_device *dev = hid_to_usb_dev(hid);
+ struct usbhid_device *usbhid = hid->driver_data;
- return 0;
+ dinfo.bustype = BUS_USB;
+ dinfo.busnum = dev->bus->busnum;
+ dinfo.devnum = dev->devnum;
+ dinfo.ifnum = usbhid->ifnum;
+ dinfo.vendor = le16_to_cpu(dev->descriptor.idVendor);
+ dinfo.product = le16_to_cpu(dev->descriptor.idProduct);
+ dinfo.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ dinfo.num_applications = hid->maxapplication;
+
+ r = copy_to_user(user_arg, &dinfo, sizeof(dinfo)) ?
+ -EFAULT : 0;
+ break;
+ }
case HIDIOCGFLAG:
- if (put_user(list->flags, (int __user *)arg))
- return -EFAULT;
-
- return 0;
+ r = put_user(list->flags, (int __user *)arg) ?
+ -EFAULT : 0;
+ break;
case HIDIOCSFLAG:
{
int newflags;
- if (get_user(newflags, (int __user *)arg))
- return -EFAULT;
+
+ if (get_user(newflags, (int __user *)arg)) {
+ r = -EFAULT;
+ break;
+ }
if ((newflags & ~HIDDEV_FLAGS) != 0 ||
((newflags & HIDDEV_FLAG_REPORT) != 0 &&
(newflags & HIDDEV_FLAG_UREF) == 0))
- return -EINVAL;
+ break;
list->flags = newflags;
- return 0;
+ r = 0;
+ break;
}
case HIDIOCGSTRING:
- mutex_lock(&hiddev->existancelock);
- if (hiddev->exist)
- r = hiddev_ioctl_string(hiddev, cmd, user_arg);
- else
- r = -ENODEV;
- mutex_unlock(&hiddev->existancelock);
- return r;
+ r = hiddev_ioctl_string(hiddev, cmd, user_arg);
+ break;
case HIDIOCINITREPORT:
- mutex_lock(&hiddev->existancelock);
- if (!hiddev->exist) {
- mutex_unlock(&hiddev->existancelock);
- return -ENODEV;
- }
usbhid_init_reports(hid);
- mutex_unlock(&hiddev->existancelock);
-
- return 0;
+ r = 0;
+ break;
case HIDIOCGREPORT:
- if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
- return -EFAULT;
+ if (copy_from_user(&rinfo, user_arg, sizeof(rinfo))) {
+ r = -EFAULT;
+ break;
+ }
if (rinfo.report_type == HID_REPORT_TYPE_OUTPUT)
- return -EINVAL;
+ break;
- if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
- return -EINVAL;
+ report = hiddev_lookup_report(hid, &rinfo);
+ if (report == NULL)
+ break;
- mutex_lock(&hiddev->existancelock);
- if (hiddev->exist) {
- usbhid_submit_report(hid, report, USB_DIR_IN);
- usbhid_wait_io(hid);
- }
- mutex_unlock(&hiddev->existancelock);
+ usbhid_submit_report(hid, report, USB_DIR_IN);
+ usbhid_wait_io(hid);
- return 0;
+ r = 0;
+ break;
case HIDIOCSREPORT:
- if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
- return -EFAULT;
+ if (copy_from_user(&rinfo, user_arg, sizeof(rinfo))) {
+ r = -EFAULT;
+ break;
+ }
if (rinfo.report_type == HID_REPORT_TYPE_INPUT)
- return -EINVAL;
+ break;
- if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
- return -EINVAL;
+ report = hiddev_lookup_report(hid, &rinfo);
+ if (report == NULL)
+ break;
- mutex_lock(&hiddev->existancelock);
- if (hiddev->exist) {
- usbhid_submit_report(hid, report, USB_DIR_OUT);
- usbhid_wait_io(hid);
- }
- mutex_unlock(&hiddev->existancelock);
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+ usbhid_wait_io(hid);
- return 0;
+ r = 0;
+ break;
case HIDIOCGREPORTINFO:
- if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
- return -EFAULT;
+ if (copy_from_user(&rinfo, user_arg, sizeof(rinfo))) {
+ r = -EFAULT;
+ break;
+ }
- if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
- return -EINVAL;
+ report = hiddev_lookup_report(hid, &rinfo);
+ if (report == NULL)
+ break;
rinfo.num_fields = report->maxfield;
- if (copy_to_user(user_arg, &rinfo, sizeof(rinfo)))
- return -EFAULT;
-
- return 0;
+ r = copy_to_user(user_arg, &rinfo, sizeof(rinfo)) ?
+ -EFAULT : 0;
+ break;
case HIDIOCGFIELDINFO:
- if (copy_from_user(&finfo, user_arg, sizeof(finfo)))
- return -EFAULT;
+ if (copy_from_user(&finfo, user_arg, sizeof(finfo))) {
+ r = -EFAULT;
+ break;
+ }
+
rinfo.report_type = finfo.report_type;
rinfo.report_id = finfo.report_id;
- if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
- return -EINVAL;
+
+ report = hiddev_lookup_report(hid, &rinfo);
+ if (report == NULL)
+ break;
if (finfo.field_index >= report->maxfield)
- return -EINVAL;
+ break;
field = report->field[finfo.field_index];
memset(&finfo, 0, sizeof(finfo));
@@ -760,10 +765,9 @@
finfo.unit_exponent = field->unit_exponent;
finfo.unit = field->unit;
- if (copy_to_user(user_arg, &finfo, sizeof(finfo)))
- return -EFAULT;
-
- return 0;
+ r = copy_to_user(user_arg, &finfo, sizeof(finfo)) ?
+ -EFAULT : 0;
+ break;
case HIDIOCGUCODE:
/* fall through */
@@ -772,57 +776,66 @@
case HIDIOCGUSAGES:
case HIDIOCSUSAGES:
case HIDIOCGCOLLECTIONINDEX:
- mutex_lock(&hiddev->existancelock);
- if (hiddev->exist)
- r = hiddev_ioctl_usage(hiddev, cmd, user_arg);
- else
- r = -ENODEV;
- mutex_unlock(&hiddev->existancelock);
- return r;
+ r = hiddev_ioctl_usage(hiddev, cmd, user_arg);
+ break;
case HIDIOCGCOLLECTIONINFO:
- if (copy_from_user(&cinfo, user_arg, sizeof(cinfo)))
- return -EFAULT;
+ if (copy_from_user(&cinfo, user_arg, sizeof(cinfo))) {
+ r = -EFAULT;
+ break;
+ }
if (cinfo.index >= hid->maxcollection)
- return -EINVAL;
+ break;
cinfo.type = hid->collection[cinfo.index].type;
cinfo.usage = hid->collection[cinfo.index].usage;
cinfo.level = hid->collection[cinfo.index].level;
- if (copy_to_user(user_arg, &cinfo, sizeof(cinfo)))
- return -EFAULT;
- return 0;
+ r = copy_to_user(user_arg, &cinfo, sizeof(cinfo)) ?
+ -EFAULT : 0;
+ break;
default:
-
if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
- return -EINVAL;
+ break;
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGNAME(0))) {
int len;
- if (!hid->name)
- return 0;
+
+ if (!hid->name) {
+ r = 0;
+ break;
+ }
+
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->name, len) ?
+ r = copy_to_user(user_arg, hid->name, len) ?
-EFAULT : len;
+ break;
}
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGPHYS(0))) {
int len;
- if (!hid->phys)
- return 0;
+
+ if (!hid->phys) {
+ r = 0;
+ break;
+ }
+
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->phys, len) ?
+ r = copy_to_user(user_arg, hid->phys, len) ?
-EFAULT : len;
+ break;
}
}
- return -EINVAL;
+
+ret_unlock:
+ mutex_unlock(&hiddev->existancelock);
+ return r;
}
#ifdef CONFIG_COMPAT
@@ -892,7 +905,7 @@
hiddev->exist = 1;
retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) {
- err_hid("Not able to get a minor for this device.");
+ hid_err(hid, "Not able to get a minor for this device\n");
hid->hiddev = NULL;
kfree(hiddev);
return -1;
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 89d2e84..1673cac 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -95,7 +95,6 @@
unsigned long stop_retry; /* Time to give up, in jiffies */
unsigned int retry_delay; /* Delay length in ms */
struct work_struct reset_work; /* Task context for resets */
- struct work_struct restart_work; /* waking up for output to be done in a task */
wait_queue_head_t wait; /* For sleeping */
int ledcount; /* counting the number of active leds */
};
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index a948605..0658173 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -24,6 +24,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -104,16 +106,18 @@
if (usb_kbd_keycode[kbd->old[i]])
input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
else
- dev_info(&urb->dev->dev,
- "Unknown key (scancode %#x) released.\n", kbd->old[i]);
+ hid_info(urb->dev,
+ "Unknown key (scancode %#x) released.\n",
+ kbd->old[i]);
}
if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
if (usb_kbd_keycode[kbd->new[i]])
input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
else
- dev_info(&urb->dev->dev,
- "Unknown key (scancode %#x) released.\n", kbd->new[i]);
+ hid_info(urb->dev,
+ "Unknown key (scancode %#x) released.\n",
+ kbd->new[i]);
}
}
@@ -124,9 +128,9 @@
resubmit:
i = usb_submit_urb (urb, GFP_ATOMIC);
if (i)
- err_hid ("can't resubmit intr, %s-%s/input0, status %d",
- kbd->usbdev->bus->bus_name,
- kbd->usbdev->devpath, i);
+ hid_err(urb->dev, "can't resubmit intr, %s-%s/input0, status %d",
+ kbd->usbdev->bus->bus_name,
+ kbd->usbdev->devpath, i);
}
static int usb_kbd_event(struct input_dev *dev, unsigned int type,
@@ -150,7 +154,7 @@
*(kbd->leds) = kbd->newleds;
kbd->led->dev = kbd->usbdev;
if (usb_submit_urb(kbd->led, GFP_ATOMIC))
- err_hid("usb_submit_urb(leds) failed");
+ pr_err("usb_submit_urb(leds) failed\n");
return 0;
}
@@ -160,7 +164,7 @@
struct usb_kbd *kbd = urb->context;
if (urb->status)
- dev_warn(&urb->dev->dev, "led urb status %d received\n",
+ hid_warn(urb->dev, "led urb status %d received\n",
urb->status);
if (*(kbd->leds) == kbd->newleds)
@@ -169,7 +173,7 @@
*(kbd->leds) = kbd->newleds;
kbd->led->dev = kbd->usbdev;
if (usb_submit_urb(kbd->led, GFP_ATOMIC))
- err_hid("usb_submit_urb(leds) failed");
+ hid_err(urb->dev, "usb_submit_urb(leds) failed\n");
}
static int usb_kbd_open(struct input_dev *dev)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index b923074..30f06e9 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,8 +75,7 @@
In doubt, say Y.
config I2C_SMBUS
- tristate
- prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3998dd6..f1cfe7e 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -3,7 +3,7 @@
#
menu "I2C Algorithms"
- depends on !I2C_HELPER_AUTO
+ visible if !I2C_HELPER_AUTO
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
@@ -15,15 +15,3 @@
tristate "I2C PCA 9564 interfaces"
endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
- tristate
-config I2C_ALGOPCF
- tristate
-config I2C_ALGOPCA
- tristate
-endif
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index d53b9e9..27b6a3c 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -245,6 +245,7 @@
goto err_free_tgfx;
}
+ parport_put_port(pp);
return tgfx;
err_free_dev:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b8c51b9..3a87f3b 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -179,6 +179,22 @@
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
+config KEYBOARD_GPIO_POLLED
+ tristate "Polled GPIO buttons"
+ depends on GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ This driver implements support for buttons connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys_polled.
+
config KEYBOARD_TCA6416
tristate "TCA6416 Keypad Support"
depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a34452e..622de73 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 0000000..4c17aff
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,261 @@
+/*
+ * Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ * This file was based on: /drivers/input/misc/cobalt_btns.c
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * also was based on: /drivers/input/keyboard/gpio_keys.c
+ * Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME "gpio-keys-polled"
+
+struct gpio_keys_button_data {
+ int last_state;
+ int count;
+ int threshold;
+ int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ struct gpio_keys_platform_data *pdata;
+ struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+ struct gpio_keys_button *button,
+ struct gpio_keys_button_data *bdata)
+{
+ int state;
+
+ if (bdata->can_sleep)
+ state = !!gpio_get_value_cansleep(button->gpio);
+ else
+ state = !!gpio_get_value(button->gpio);
+
+ if (state != bdata->last_state) {
+ unsigned int type = button->type ?: EV_KEY;
+
+ input_event(input, type, button->code,
+ !!(state ^ button->active_low));
+ input_sync(input);
+ bdata->count = 0;
+ bdata->last_state = state;
+ }
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ struct input_dev *input = dev->input;
+ int i;
+
+ for (i = 0; i < bdev->pdata->nbuttons; i++) {
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+ if (bdata->count < bdata->threshold)
+ bdata->count++;
+ else
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ bdata);
+ }
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->enable)
+ pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->disable)
+ pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+ struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct gpio_keys_polled_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error;
+ int i;
+
+ if (!pdata || !pdata->poll_interval)
+ return -EINVAL;
+
+ bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+ pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+ GFP_KERNEL);
+ if (!bdev) {
+ dev_err(dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ dev_err(dev, "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_bdev;
+ }
+
+ poll_dev->private = bdev;
+ poll_dev->poll = gpio_keys_polled_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+ poll_dev->open = gpio_keys_polled_open;
+ poll_dev->close = gpio_keys_polled_close;
+
+ input = poll_dev->input;
+
+ input->evbit[0] = BIT(EV_KEY);
+ input->name = pdev->name;
+ input->phys = DRV_NAME"/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_keys_button *button = &pdata->buttons[i];
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+ unsigned int gpio = button->gpio;
+ unsigned int type = button->type ?: EV_KEY;
+
+ if (button->wakeup) {
+ dev_err(dev, DRV_NAME " does not support wakeup\n");
+ error = -EINVAL;
+ goto err_free_gpio;
+ }
+
+ error = gpio_request(gpio,
+ button->desc ? button->desc : DRV_NAME);
+ if (error) {
+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ error = gpio_direction_input(gpio);
+ if (error) {
+ dev_err(dev,
+ "unable to set direction on gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ bdata->can_sleep = gpio_cansleep(gpio);
+ bdata->last_state = -1;
+ bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+ pdata->poll_interval);
+
+ input_set_capability(input, type, button->code);
+ }
+
+ bdev->poll_dev = poll_dev;
+ bdev->dev = dev;
+ bdev->pdata = pdata;
+ platform_set_drvdata(pdev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ error);
+ goto err_free_gpio;
+ }
+
+ /* report initial state of the buttons */
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ &bdev->data[i]);
+
+ return 0;
+
+err_free_gpio:
+ while (--i >= 0)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(poll_dev);
+
+err_free_bdev:
+ kfree(bdev);
+
+ platform_set_drvdata(pdev, NULL);
+ return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+ struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ int i;
+
+ input_unregister_polled_device(bdev->poll_dev);
+
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(bdev->poll_dev);
+
+ kfree(bdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+ .probe = gpio_keys_polled_probe,
+ .remove = __devexit_p(gpio_keys_polled_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+ return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+ platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b952317..ee82851 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,14 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -80,6 +88,14 @@
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+ /* MacbookAir3,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+ /* MacbookAir3,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
/* Terminating entry */
{}
};
@@ -234,6 +250,30 @@
{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+ { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+ },
{}
};
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 613a365..0aefaa8 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,7 +51,8 @@
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
/* synaptics modes query bits */
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3c287dd..4225f5d 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -358,7 +358,7 @@
gscps2_reset(ps2port);
ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
- snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+ snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b3252ef..4852b44 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1436,6 +1436,12 @@
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+ { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+ { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+ { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
@@ -1504,6 +1510,9 @@
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
+ { USB_DEVICE_WACOM(0xD8) },
+ { USB_DEVICE_WACOM(0xDA) },
+ { USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index f45f80f..73fd664 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -178,6 +178,7 @@
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+ {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 2385e6c..78b0895 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -31,7 +31,7 @@
select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-menuconfig MEDIA_TUNER_CUSTOMISE
+config MEDIA_TUNER_CUSTOMISE
bool "Customize analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
default y if EMBEDDED
@@ -44,7 +44,8 @@
If unsure say N.
-if MEDIA_TUNER_CUSTOMISE
+menu "Customize TV tuners"
+ visible if MEDIA_TUNER_CUSTOMISE
config MEDIA_TUNER_SIMPLE
tristate "Simple tuner support"
@@ -185,5 +186,4 @@
default m if MEDIA_TUNER_CUSTOMISE
help
NXP TDA18218 silicon tuner driver.
-
-endif # MEDIA_TUNER_CUSTOMISE
+endmenu
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index e9062b0..96b2701 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -12,9 +12,8 @@
If unsure say N.
-if DVB_FE_CUSTOMISE
-
menu "Customise DVB Frontends"
+ visible if DVB_FE_CUSTOMISE
comment "Multistandard (satellite) frontends"
depends on DVB_CORE
@@ -619,5 +618,3 @@
tristate "Dummy frontend driver"
default n
endmenu
-
-endif
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac16e81..6830d28 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -112,7 +112,7 @@
#
menu "Encoders/decoders and other helper chips"
- depends on !VIDEO_HELPER_CHIPS_AUTO
+ visible if !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index c2960ac..811775a 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -482,10 +482,17 @@
uint32_t data = 0;
struct ubi_vid_hdr vid_hdr;
- addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+ /*
+ * It is important to first invalidate the EC header, and then the VID
+ * header. Otherwise a power cut may lead to valid EC header and
+ * invalid VID header, in which case UBI will treat this PEB as
+ * corrupted and will try to preserve it, and print scary warnings (see
+ * the header comment in scan.c for more information).
+ */
+ addr = (loff_t)pnum * ubi->peb_size;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
if (!err) {
- addr -= ubi->vid_hdr_aloffset;
+ addr += ubi->vid_hdr_aloffset;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
(void *)&data);
if (!err)
@@ -494,18 +501,24 @@
/*
* We failed to write to the media. This was observed with Spansion
- * S29GL512N NOR flash. Most probably the eraseblock erasure was
- * interrupted at a very inappropriate moment, so it became unwritable.
- * In this case we probably anyway have garbage in this PEB.
+ * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+ * was interrupted at a very inappropriate moment, so it became
+ * unwritable. In this case we probably anyway have garbage in this
+ * PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
- /*
- * The VID header is corrupted, so we can safely erase this
- * PEB and not afraid that it will be treated as a valid PEB in
- * case of an unclean reboot.
- */
- return 0;
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+ struct ubi_ec_hdr ec_hdr;
+
+ err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+ /*
+ * Both VID and EC headers are corrupted, so we can
+ * safely erase this PEB and not afraid that it will be
+ * treated as a valid PEB in case of an unclean reboot.
+ */
+ return 0;
+ }
/*
* The PEB contains a valid VID header, but we cannot invalidate it.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 204345b..79ca304 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -953,6 +953,10 @@
* impossible to distinguish it from a PEB which just
* contains garbage because of a power cut during erase
* operation. So we just schedule this PEB for erasure.
+ *
+ * Besides, in case of NOR flash, we deliberatly
+ * corrupt both headers because NOR flash erasure is
+ * slow and can start from the end.
*/
err = 0;
else
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d9f5148..9383063 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -349,7 +349,6 @@
.name = "GSC-PCI",
.unmask = dino_unmask_irq,
.mask = dino_mask_irq,
- .ack = no_ack_irq,
};
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 1211974..e860038 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -186,7 +186,6 @@
.name = "EISA",
.unmask = eisa_unmask_irq,
.mask = eisa_mask_irq,
- .ack = no_ack_irq,
};
static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
@@ -340,7 +339,7 @@
setup_irq(2, &irq2_action);
for (i = 0; i < 16; i++) {
set_irq_chip_and_handler(i, &eisa_interrupt_type,
- handle_level_irq);
+ handle_simple_irq);
}
EISA_bus = 1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index e605298..772b193 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -143,7 +143,6 @@
.name = "GSC-ASIC",
.unmask = gsc_asic_unmask_irq,
.mask = gsc_asic_mask_irq,
- .ack = no_ack_irq,
};
int gsc_assign_irq(struct irq_chip *type, void *data)
@@ -153,7 +152,7 @@
if (irq > GSC_IRQ_MAX)
return NO_IRQ;
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_simple_irq);
set_irq_chip_data(irq, data);
return irq++;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index a3120a0..0327894 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -669,6 +669,13 @@
DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
vi->eoi_addr, vi->eoi_data);
iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static void iosapic_eoi_irq(unsigned int irq)
+{
+ struct vector_info *vi = get_irq_chip_data(irq);
+
+ iosapic_eoi(vi->eoi_addr, vi->eoi_data);
cpu_eoi_irq(irq);
}
@@ -705,6 +712,7 @@
.unmask = iosapic_unmask_irq,
.mask = iosapic_mask_irq,
.ack = cpu_ack_irq,
+ .eoi = iosapic_eoi_irq,
#ifdef CONFIG_SMP
.set_affinity = iosapic_set_affinity_irq,
#endif
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 2350e8a..f2f501e 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -64,6 +64,7 @@
static unsigned int led_lanrxtx __read_mostly = 1;
static char lcd_text[32] __read_mostly;
static char lcd_text_default[32] __read_mostly;
+static int lcd_no_led_support __read_mostly = 0; /* KittyHawk doesn't support LED on its LCD */
static struct workqueue_struct *led_wq;
@@ -115,7 +116,7 @@
.lcd_width = 16,
.lcd_cmd_reg_addr = KITTYHAWK_LCD_CMD,
.lcd_data_reg_addr = KITTYHAWK_LCD_DATA,
- .min_cmd_delay = 40,
+ .min_cmd_delay = 80,
.reset_cmd1 = 0x80,
.reset_cmd2 = 0xc0,
};
@@ -135,6 +136,9 @@
/* Display the default text now */
if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+ /* KittyHawk has no LED support on its LCD */
+ if (lcd_no_led_support) return 0;
+
/* Create the work queue and queue the LED task */
led_wq = create_singlethread_workqueue("led_wq");
queue_delayed_work(led_wq, &led_task, 0);
@@ -248,9 +252,13 @@
proc_pdc_root = proc_mkdir("pdc", 0);
if (!proc_pdc_root) return -1;
- ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
- &led_proc_fops, (void *)LED_NOLCD); /* LED */
- if (!ent) return -1;
+
+ if (!lcd_no_led_support)
+ {
+ ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
+ &led_proc_fops, (void *)LED_NOLCD); /* LED */
+ if (!ent) return -1;
+ }
if (led_type == LED_HASLCD)
{
@@ -692,6 +700,7 @@
case 0x58B: /* KittyHawk DC2 100 (K200) */
printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, "
"LED detection skipped.\n", __FILE__, CPU_HVERSION);
+ lcd_no_led_support = 1;
goto found; /* use the preinitialized values of lcd_info */
}
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 0846daf..2824153 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -323,7 +323,6 @@
.name = SUPERIO,
.unmask = superio_unmask_irq,
.mask = superio_mask_irq,
- .ack = no_ack_irq,
};
#ifdef DEBUG_SUPERIO_INIT
@@ -354,7 +353,7 @@
#endif
for (i = 0; i < 16; i++) {
- set_irq_chip_and_handler(i, &superio_interrupt_type, handle_level_irq);
+ set_irq_chip_and_handler(i, &superio_interrupt_type, handle_simple_irq);
}
/*
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 3753fd0..2fe8cb8 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -70,6 +70,7 @@
va_end(args);
}
}
+EXPORT_SYMBOL(soc_pcmcia_debug);
#endif
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 60a5a5c..d235f44 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -81,6 +81,8 @@
static int wlan_status = 1;
static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
module_param(wlan_status, int, 0444);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
@@ -92,6 +94,16 @@
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
/*
* Some events we use, same for all Asus
*/
@@ -114,6 +126,8 @@
*/
#define WL_RSTS 0x01 /* internal Wifi */
#define BT_RSTS 0x02 /* internal Bluetooth */
+#define WM_RSTS 0x08 /* internal wimax */
+#define WW_RSTS 0x20 /* internal wwan */
/* LED */
#define METHOD_MLED "MLED"
@@ -132,6 +146,11 @@
*/
#define METHOD_WLAN "WLED"
#define METHOD_BLUETOOTH "BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN "GSMC"
+#define METHOD_WIMAX "WMXC"
+
#define METHOD_WL_STATUS "RSTS"
/* Brightness */
@@ -883,6 +902,64 @@
}
/*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+ pr_warning("Error setting wimax status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+ pr_warning("Error setting wwan status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
+/*
* Display
*/
static void asus_set_display(struct asus_laptop *asus, int value)
@@ -1202,6 +1279,8 @@
static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
@@ -1212,6 +1291,8 @@
&dev_attr_infos.attr,
&dev_attr_wlan.attr,
&dev_attr_bluetooth.attr,
+ &dev_attr_wimax.attr,
+ &dev_attr_wwan.attr,
&dev_attr_display.attr,
&dev_attr_ledd.attr,
&dev_attr_ls_level.attr,
@@ -1239,6 +1320,13 @@
} else if (attr == &dev_attr_display.attr) {
supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
+ } else if (attr == &dev_attr_wimax.attr) {
+ supported =
+ !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+ } else if (attr == &dev_attr_wwan.attr) {
+ supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
} else if (attr == &dev_attr_ledd.attr) {
supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
@@ -1397,7 +1485,8 @@
/*
* The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
*/
status =
@@ -1440,6 +1529,12 @@
if (wlan_status >= 0)
asus_wlan_set(asus, !!wlan_status);
+ if (wimax_status >= 0)
+ asus_wimax_set(asus, !!wimax_status);
+
+ if (wwan_status >= 0)
+ asus_wwan_set(asus, !!wwan_status);
+
/* Keyboard Backlight is on by default */
if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
asus_kled_set(asus, 1);
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 462ceab..0d50fbb 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -298,8 +298,8 @@
kfree(obj);
}
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
int value;
struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1dac659..9e05af9 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -172,6 +172,8 @@
bios_return = *((struct bios_return *)obj->buffer.pointer);
memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+ kfree(obj);
return 0;
}
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 3c2c6b9..94a114a 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -28,6 +28,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/dmi.h>
+#include <linux/efi.h>
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
@@ -220,32 +221,13 @@
sysdev_class_unregister(&class_rtl);
}
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
- RTL_DEBUG("found IBM server '%s'\n", id->ident);
- return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE) \
-{ \
- .ident = NAME, \
- .matches = { \
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
- DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
- }, \
- .callback = dmi_check_cb \
-}
static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
- ibm_dmi_entry("BladeCenter LS21", "7971"),
- ibm_dmi_entry("BladeCenter LS22", "7901"),
- ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
- ibm_dmi_entry("BladeCenter HS22", "7870"),
- ibm_dmi_entry("BladeCenter HS22V", "7871"),
- ibm_dmi_entry("System x3550 M2", "7946"),
- ibm_dmi_entry("System x3650 M2", "7947"),
- ibm_dmi_entry("System x3550 M3", "7944"),
- ibm_dmi_entry("System x3650 M3", "7945"),
+ { \
+ .matches = { \
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
+ }, \
+ },
{ }
};
@@ -257,7 +239,7 @@
if (force)
pr_warning("ibm-rtl: module loaded by force\n");
/* first ensure that we are running on IBM HW */
- else if (!dmi_check_system(ibm_rtl_dmi_table))
+ else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
return -ENODEV;
/* Get the address for the Extended BIOS Data Area */
@@ -302,7 +284,7 @@
RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
rtl_cmd_width, rtl_cmd_type);
addr = ioread32(&rtl_table->cmd_port_address);
- RTL_DEBUG("addr = %#llx\n", addr);
+ RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
plen = rtl_cmd_width/sizeof(char);
rtl_cmd_addr = rtl_port_map(addr, plen);
RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 42a5469..35278ad 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -43,16 +43,18 @@
#define dprintk(msg...) pr_debug(DRV_PFX msg)
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE (SCANCODE_BASE + 4)
static struct key_entry msi_wmi_keymap[] = {
{ KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} },
{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
{ KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} },
{ KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} },
+ { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} },
{ KE_END, 0}
};
static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
@@ -169,7 +171,7 @@
ktime_t diff;
cur = ktime_get_real();
diff = ktime_sub(cur, last_pressed[key->code -
- KEYCODE_BASE]);
+ SCANCODE_BASE]);
/* Ignore event if the same event happened in a 50 ms
timeframe -> Key press may result in 10-20 GPEs */
if (ktime_to_us(diff) < 1000 * 50) {
@@ -178,7 +180,7 @@
key->code, ktime_to_us(diff));
return;
}
- last_pressed[key->code - KEYCODE_BASE] = cur;
+ last_pressed[key->code - SCANCODE_BASE] = cur;
if (key->type == KE_KEY &&
/* Brightness is served via acpi video driver */
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2d61186..e8c2199 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8497,7 +8497,6 @@
ibm->acpi->type,
dispatch_acpi_notify);
ibm->flags.acpi_notify_installed = 0;
- ibm->flags.acpi_notify_installed = 0;
}
if (ibm->flags.proc_created) {
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 06f304f..4276da7 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -135,6 +135,7 @@
{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
{ KE_KEY, 0x142, { KEY_WLAN } },
{ KE_KEY, 0x143, { KEY_PROG1 } },
+ { KE_KEY, 0x17f, { KEY_FN } },
{ KE_KEY, 0xb05, { KEY_PROG2 } },
{ KE_KEY, 0xb06, { KEY_WWW } },
{ KE_KEY, 0xb07, { KEY_MAIL } },
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 104b77c..aecd9a9 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -755,7 +755,7 @@
struct wmi_block *wblock;
list_for_each_entry(wblock, &wmi_block_list, list)
- if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+ if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
return true;
return false;
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index a5050e2..825951b 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -635,7 +635,7 @@
init_subchannel_id(&mchk_schid);
mchk_schid.sch_no = crw0->rsid;
if (crw1)
- mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+ mchk_schid.ssid = (crw1->rsid >> 4) & 3;
/*
* Since we are always presented with IPI in the CRW, we have to
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index cad7d45..c265aed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1029,10 +1029,6 @@
goto err_release_pl_mem;
}
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
- if (ret)
- goto err_release_pl_mem;
-
/* Initialize par */
da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
@@ -1060,7 +1056,7 @@
ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
if (ret)
- goto err_free_irq;
+ goto err_release_pl_mem;
da8xx_fb_info->cmap.len = par->palette_sz;
/* initialize var_screeninfo */
@@ -1088,8 +1084,13 @@
goto err_cpu_freq;
}
#endif
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (ret)
+ goto irq_freq;
return 0;
+irq_freq:
#ifdef CONFIG_CPU_FREQ
err_cpu_freq:
unregister_framebuffer(da8xx_fb_info);
@@ -1098,9 +1099,6 @@
err_dealloc_cmap:
fb_dealloc_cmap(&da8xx_fb_info->cmap);
-err_free_irq:
- free_irq(par->irq, par);
-
err_release_pl_mem:
dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
par->p_palette_base);
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index affdf3e..5c3960d 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -80,6 +80,7 @@
* @cmap: frame buffer colormap structure
* @len: length of @cmap
* @transp: boolean, 1 if there is transparency, 0 otherwise
+ * @flags: flags for kmalloc memory allocation
*
* Allocates memory for a colormap @cmap. @len is the
* number of entries in the palette.
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index e4c4d89..be8ccb4 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -22,6 +22,7 @@
#define DC_HFILT_COUNT 0x100
#define DC_VFILT_COUNT 0x100
#define VP_COEFF_SIZE 0x1000
+#define VP_PAL_COUNT 0x100
#define OUTPUT_CRT 0x01
#define OUTPUT_PANEL 0x02
@@ -48,7 +49,8 @@
uint64_t vp[VP_REG_COUNT];
uint64_t fp[FP_REG_COUNT];
- uint32_t pal[DC_PAL_COUNT];
+ uint32_t dc_pal[DC_PAL_COUNT];
+ uint32_t vp_pal[VP_PAL_COUNT];
uint32_t hcoeff[DC_HFILT_COUNT * 2];
uint32_t vcoeff[DC_VFILT_COUNT];
uint32_t vp_coeff[VP_COEFF_SIZE / 4];
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index 85ec7f6..79e9abc 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -610,10 +610,15 @@
memcpy(par->vp, par->vp_regs, sizeof(par->vp));
memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
- /* save the palette */
+ /* save the display controller palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- par->pal[i] = read_dc(par, DC_PAL_DATA);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ par->vp_pal[i] = read_vp(par, VP_PDR);
/* save the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -706,8 +711,8 @@
/* restore the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- write_dc(par, DC_PAL_DATA, par->pal[i]);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
/* restore the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -751,6 +756,11 @@
}
}
+ /* restore video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ write_vp(par, VP_PDR, par->vp_pal[i]);
+
/* restore video coeff ram */
memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
}
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 2b17ad5..43f9f02 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -412,8 +412,16 @@
register_balloon(&balloon_sysdev);
- /* Initialise the balloon with excess memory space. */
- extra_pfn_end = min(e820_end_of_ram_pfn(),
+ /*
+ * Initialise the balloon with excess memory space. We need
+ * to make sure we don't add memory which doesn't exist or
+ * logically exist. The E820 map can be trimmed to be smaller
+ * than the amount of physical memory due to the mem= command
+ * line parameter. And if this is a 32-bit non-HIGHMEM kernel
+ * on a system with memory which requires highmem to access,
+ * don't try to use it.
+ */
+ extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
(unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
for (pfn = PFN_UP(xen_extra_mem_start);
pfn < extra_pfn_end;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 2811bb9..31af0ac 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -105,7 +105,6 @@
static struct irq_info *irq_info;
static int *pirq_to_irq;
-static int nr_pirqs;
static int *evtchn_to_irq;
struct cpu_evtchn_s {
@@ -385,12 +384,17 @@
return ret;
}
-/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
- * succeeded otherwise nr_pirqs won't hold the right value */
-static int find_unbound_pirq(void)
+static int find_unbound_pirq(int type)
{
- int i;
- for (i = nr_pirqs-1; i >= 0; i--) {
+ int rc, i;
+ struct physdev_get_free_pirq op_get_free_pirq;
+ op_get_free_pirq.type = type;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_free_pirq, &op_get_free_pirq);
+ if (!rc)
+ return op_get_free_pirq.pirq;
+
+ for (i = 0; i < nr_irqs; i++) {
if (pirq_to_irq[i] < 0)
return i;
}
@@ -423,7 +427,7 @@
if (irq == start)
goto no_irqs;
- res = irq_alloc_desc_at(irq, 0);
+ res = irq_alloc_desc_at(irq, -1);
if (WARN_ON(res != irq))
return -1;
@@ -611,10 +615,10 @@
spin_lock(&irq_mapping_update_lock);
- if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
+ if ((pirq > nr_irqs) || (gsi > nr_irqs)) {
printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
- pirq > nr_pirqs ? "nr_pirqs" :"",
- gsi > nr_irqs ? "nr_irqs" : "");
+ pirq > nr_irqs ? "pirq" :"",
+ gsi > nr_irqs ? "gsi" : "");
goto out;
}
@@ -630,7 +634,7 @@
if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
xen_pv_domain())) {
irq = gsi;
- irq_alloc_desc_at(irq, 0);
+ irq_alloc_desc_at(irq, -1);
} else
irq = find_unbound_irq();
@@ -664,17 +668,21 @@
#include <linux/msi.h>
#include "../pci/msi.h"
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc)
{
spin_lock(&irq_mapping_update_lock);
- *irq = find_unbound_irq();
- if (*irq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_IRQ) {
+ *irq = find_unbound_irq();
+ if (*irq == -1)
+ goto out;
+ }
- *pirq = find_unbound_pirq();
- if (*pirq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_PIRQ) {
+ *pirq = find_unbound_pirq(MAP_PIRQ_TYPE_MSI);
+ if (*pirq == -1)
+ goto out;
+ }
set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
handle_level_irq, name);
@@ -762,6 +770,7 @@
printk(KERN_WARNING "unmap irq failed %d\n", rc);
goto out;
}
+ pirq_to_irq[info->u.pirq.pirq] = -1;
}
irq_info[irq] = mk_unbound_info();
@@ -782,6 +791,11 @@
return gsi_from_irq(irq);
}
+int xen_irq_from_pirq(unsigned pirq)
+{
+ return pirq_to_irq[pirq];
+}
+
int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
@@ -1279,6 +1293,42 @@
return ret;
}
+static void restore_cpu_pirqs(void)
+{
+ int pirq, rc, irq, gsi;
+ struct physdev_map_pirq map_irq;
+
+ for (pirq = 0; pirq < nr_irqs; pirq++) {
+ irq = pirq_to_irq[pirq];
+ if (irq == -1)
+ continue;
+
+ /* save/restore of PT devices doesn't work, so at this point the
+ * only devices present are GSI based emulated devices */
+ gsi = gsi_from_irq(irq);
+ if (!gsi)
+ continue;
+
+ map_irq.domid = DOMID_SELF;
+ map_irq.type = MAP_PIRQ_TYPE_GSI;
+ map_irq.index = gsi;
+ map_irq.pirq = pirq;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ if (rc) {
+ printk(KERN_WARNING "xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",
+ gsi, irq, pirq, rc);
+ irq_info[irq] = mk_unbound_info();
+ pirq_to_irq[pirq] = -1;
+ continue;
+ }
+
+ printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+
+ startup_pirq(irq);
+ }
+}
+
static void restore_cpu_virqs(unsigned int cpu)
{
struct evtchn_bind_virq bind_virq;
@@ -1422,6 +1472,8 @@
unmask_evtchn(evtchn);
}
+
+ restore_cpu_pirqs();
}
static struct irq_chip xen_dynamic_chip __read_mostly = {
@@ -1506,26 +1558,17 @@
void __init xen_init_IRQ(void)
{
- int i, rc;
- struct physdev_nr_pirqs op_nr_pirqs;
+ int i;
cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
GFP_KERNEL);
irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
- if (rc < 0) {
- nr_pirqs = nr_irqs;
- if (rc != -ENOSYS)
- printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
- } else {
- if (xen_pv_domain() && !xen_initial_domain())
- nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
- else
- nr_pirqs = op_nr_pirqs.nr_pirqs;
- }
- pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
- for (i = 0; i < nr_pirqs; i++)
+ /* We are using nr_irqs as the maximum number of pirq available but
+ * that number is actually chosen by Xen and we don't know exactly
+ * what it is. Be careful choosing high pirq numbers. */
+ pirq_to_irq = kcalloc(nr_irqs, sizeof(*pirq_to_irq), GFP_KERNEL);
+ for (i = 0; i < nr_irqs; i++)
pirq_to_irq[i] = -1;
evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index ef9c7db..db8c4c4 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -49,6 +49,7 @@
if (!*cancelled) {
xen_irq_resume();
+ xen_console_resume();
xen_timer_resume();
}
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index d5c1401..d34896c 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -980,19 +980,11 @@
}
}
-static DEFINE_MUTEX(autofs4_ioctl_mutex);
-
static long autofs4_root_ioctl(struct file *filp,
unsigned int cmd, unsigned long arg)
{
- long ret;
struct inode *inode = filp->f_dentry->d_inode;
-
- mutex_lock(&autofs4_ioctl_mutex);
- ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
- mutex_unlock(&autofs4_ioctl_mutex);
-
- return ret;
+ return autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
}
#ifdef CONFIG_COMPAT
@@ -1002,13 +994,11 @@
struct inode *inode = filp->f_path.dentry->d_inode;
int ret;
- mutex_lock(&autofs4_ioctl_mutex);
if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
else
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
(unsigned long)compat_ptr(arg));
- mutex_unlock(&autofs4_ioctl_mutex);
return ret;
}
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 52c7557..9f26ac9 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -1964,8 +1964,10 @@
if (reg == NULL)
return ERR_PTR(-ENOMEM);
- if (strlen(name) > O2HB_MAX_REGION_NAME_LEN)
- return ERR_PTR(-ENAMETOOLONG);
+ if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) {
+ ret = -ENAMETOOLONG;
+ goto free;
+ }
spin_lock(&o2hb_live_lock);
reg->hr_region_num = 0;
@@ -1974,7 +1976,8 @@
O2NM_MAX_REGIONS);
if (reg->hr_region_num >= O2NM_MAX_REGIONS) {
spin_unlock(&o2hb_live_lock);
- return ERR_PTR(-EFBIG);
+ ret = -EFBIG;
+ goto free;
}
set_bit(reg->hr_region_num, o2hb_region_bitmap);
}
@@ -1986,10 +1989,13 @@
ret = o2hb_debug_region_init(reg, o2hb_debug_dir);
if (ret) {
config_item_put(®->hr_item);
- return ERR_PTR(ret);
+ goto free;
}
return ®->hr_item;
+free:
+ kfree(reg);
+ return ERR_PTR(ret);
}
static void o2hb_heartbeat_group_drop_item(struct config_group *group,
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index edaded4..895532ac 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -476,7 +476,6 @@
out:
iput(inode);
- ocfs2_dentry_attach_gen(dentry);
}
/*
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 58a93b9..cc2aaa9 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -959,7 +959,7 @@
r += O2HB_MAX_REGION_NAME_LEN;
}
- local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL);
+ local = kmalloc(sizeof(qr->qr_regions), GFP_ATOMIC);
if (!local) {
status = -ENOMEM;
goto bail;
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 1efea36..70dd3b1 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -159,9 +159,9 @@
char l_name[OCFS2_LOCK_ID_MAX_LEN];
unsigned int l_ro_holders;
unsigned int l_ex_holders;
- char l_level;
- char l_requested;
- char l_blocking;
+ signed char l_level;
+ signed char l_requested;
+ signed char l_blocking;
/* Data packed - type enum ocfs2_lock_type */
unsigned char l_type;
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 252e7c8..a5ebe42 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -190,7 +190,7 @@
return c;
}
- return c;
+ return NULL;
}
/*
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f3d02ca..1828451 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1574,7 +1574,7 @@
if (!tmp)
return -ENOMEM;
- pathname = d_path_with_unreachable(path, tmp, PAGE_SIZE);
+ pathname = d_path(path, tmp, PAGE_SIZE);
len = PTR_ERR(pathname);
if (IS_ERR(pathname))
goto out;
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 8c641be..a2776e2 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -287,6 +287,8 @@
#define I915_PARAM_HAS_EXECBUF2 9
#define I915_PARAM_HAS_BSD 10
#define I915_PARAM_HAS_BLT 11
+#define I915_PARAM_HAS_RELAXED_FENCING 12
+#define I915_PARAM_HAS_COHERENT_RINGS 13
typedef struct drm_i915_getparam {
int param;
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index e8713d5..f54adfc 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -360,7 +360,7 @@
extern gfp_t gfp_allowed_mask;
-extern void set_gfp_allowed_mask(gfp_t mask);
-extern gfp_t clear_gfp_allowed_mask(gfp_t mask);
+extern void pm_restrict_gfp_mask(void);
+extern void pm_restore_gfp_mask(void);
#endif /* __LINUX_GFP_H */
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index ce73a30..dd1a56f 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -16,6 +16,8 @@
struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
+ unsigned int poll_interval; /* polling interval in msecs -
+ for polling driver only */
unsigned int rep:1; /* enable input subsystem auto repeat */
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index bb0f56f..20b9801 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -820,6 +820,49 @@
hdev->ll_driver->stop(hdev);
}
+/**
+ * hid_hw_open - signal underlaying HW to start delivering events
+ *
+ * @hdev: hid device
+ *
+ * Tell underlying HW to start delivering events from the device.
+ * This function should be called sometime after successful call
+ * to hid_hiw_start().
+ */
+static inline int __must_check hid_hw_open(struct hid_device *hdev)
+{
+ return hdev->ll_driver->open(hdev);
+}
+
+/**
+ * hid_hw_close - signal underlaying HW to stop delivering events
+ *
+ * @hdev: hid device
+ *
+ * This function indicates that we are not interested in the events
+ * from this device anymore. Delivery of events may or may not stop,
+ * depending on the number of users still outstanding.
+ */
+static inline void hid_hw_close(struct hid_device *hdev)
+{
+ hdev->ll_driver->close(hdev);
+}
+
+/**
+ * hid_hw_power - requests underlying HW to go into given power mode
+ *
+ * @hdev: hid device
+ * @level: requested power level (one of %PM_HINT_* defines)
+ *
+ * This function requests underlying hardware to enter requested power
+ * mode.
+ */
+
+static inline int hid_hw_power(struct hid_device *hdev, int level)
+{
+ return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
+}
+
void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
@@ -838,12 +881,32 @@
#define hid_pidff_init NULL
#endif
-#define dbg_hid(format, arg...) if (hid_debug) \
- printk(KERN_DEBUG "%s: " format ,\
- __FILE__ , ## arg)
-#define err_hid(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
- __FILE__ , ## arg)
-#endif /* HID_FF */
+#define dbg_hid(format, arg...) \
+do { \
+ if (hid_debug) \
+ printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \
+} while (0)
+
+#define hid_printk(level, hid, fmt, arg...) \
+ dev_printk(level, &(hid)->dev, fmt, ##arg)
+#define hid_emerg(hid, fmt, arg...) \
+ dev_emerg(&(hid)->dev, fmt, ##arg)
+#define hid_crit(hid, fmt, arg...) \
+ dev_crit(&(hid)->dev, fmt, ##arg)
+#define hid_alert(hid, fmt, arg...) \
+ dev_alert(&(hid)->dev, fmt, ##arg)
+#define hid_err(hid, fmt, arg...) \
+ dev_err(&(hid)->dev, fmt, ##arg)
+#define hid_notice(hid, fmt, arg...) \
+ dev_notice(&(hid)->dev, fmt, ##arg)
+#define hid_warn(hid, fmt, arg...) \
+ dev_warn(&(hid)->dev, fmt, ##arg)
+#define hid_info(hid, fmt, arg...) \
+ dev_info(&(hid)->dev, fmt, ##arg)
+#define hid_dbg(hid, fmt, arg...) \
+ dev_dbg(&(hid)->dev, fmt, ##arg)
+
+#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/input.h b/include/linux/input.h
index 6ef4446..a8af21d 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -47,6 +47,25 @@
__u16 version;
};
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
struct input_absinfo {
__s32 value;
__s32 minimum;
@@ -624,6 +643,10 @@
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
@@ -1130,7 +1153,7 @@
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
- * @absinfo: array of &struct absinfo elements holding information
+ * @absinfo: array of &struct input_absinfo elements holding information
* about absolute axes (current value, min, max, flat, fuzz,
* resolution)
* @key: reflects current state of device's keys/buttons
diff --git a/include/xen/events.h b/include/xen/events.h
index 646dd17..00f53dd 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -76,7 +76,9 @@
#ifdef CONFIG_PCI_MSI
/* Allocate an irq and a pirq to be used with MSIs. */
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq);
+#define XEN_ALLOC_PIRQ (1 << 0)
+#define XEN_ALLOC_IRQ (1 << 1)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc_mask);
int xen_create_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int type);
#endif
@@ -89,4 +91,7 @@
/* Return gsi allocated to pirq */
int xen_gsi_from_irq(unsigned pirq);
+/* Return irq from pirq */
+int xen_irq_from_pirq(unsigned pirq);
+
#endif /* _XEN_EVENTS_H */
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
index 2b2c66c..534cac8 100644
--- a/include/xen/interface/physdev.h
+++ b/include/xen/interface/physdev.h
@@ -188,6 +188,16 @@
uint32_t nr_pirqs;
};
+/* type is MAP_PIRQ_TYPE_GSI or MAP_PIRQ_TYPE_MSI
+ * the hypercall returns a free pirq */
+#define PHYSDEVOP_get_free_pirq 23
+struct physdev_get_free_pirq {
+ /* IN */
+ int type;
+ /* OUT */
+ uint32_t pirq;
+};
+
/*
* Notify that some PIRQ-bound event channels have been unmasked.
* ** This command is obsolete since interface version 0x00030202 and is **
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 01b1d3a..6c8a2a9 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -214,7 +214,7 @@
static int irq_spurious_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, irq_spurious_proc_show, NULL);
+ return single_open(file, irq_spurious_proc_show, PDE(inode)->data);
}
static const struct file_operations irq_spurious_proc_fops = {
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 657272e..048d0b5 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -327,7 +327,6 @@
int hibernation_snapshot(int platform_mode)
{
int error;
- gfp_t saved_mask;
error = platform_begin(platform_mode);
if (error)
@@ -339,7 +338,7 @@
goto Close;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Recover_platform;
@@ -348,7 +347,10 @@
goto Recover_platform;
error = create_image(platform_mode);
- /* Control returns here after successful restore */
+ /*
+ * Control returns here (1) after the image has been created or the
+ * image creation has failed and (2) after a successful restore.
+ */
Resume_devices:
/* We may need to release the preallocated image pages here. */
@@ -357,7 +359,10 @@
dpm_resume_end(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
+
+ if (error || !in_suspend)
+ pm_restore_gfp_mask();
+
resume_console();
Close:
platform_end(platform_mode);
@@ -452,17 +457,16 @@
int hibernation_restore(int platform_mode)
{
int error;
- gfp_t saved_mask;
pm_prepare_console();
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
dpm_resume_end(PMSG_RECOVER);
}
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
pm_restore_console();
return error;
@@ -476,7 +480,6 @@
int hibernation_platform_enter(void)
{
int error;
- gfp_t saved_mask;
if (!hibernation_ops)
return -ENOSYS;
@@ -492,7 +495,6 @@
entering_platform_hibernation = true;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
@@ -536,7 +538,6 @@
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
resume_console();
Close:
@@ -646,6 +647,7 @@
swsusp_free();
if (!error)
power_down();
+ pm_restore_gfp_mask();
} else {
pr_debug("PM: Image restored successfully.\n");
}
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 7335952..ecf7705 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -197,7 +197,6 @@
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
- gfp_t saved_mask;
if (!suspend_ops)
return -ENOSYS;
@@ -208,7 +207,7 @@
goto Close;
}
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
@@ -225,7 +224,7 @@
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
Close:
if (suspend_ops->end)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index a0e4a86..baf667b 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -6,6 +6,7 @@
*
* Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright (C) 2010 Bojan Smojver <bojan@rexursive.com>
*
* This file is released under the GPLv2.
*
@@ -753,30 +754,43 @@
{
unsigned int m;
int error = 0;
+ struct bio *bio;
struct timeval start;
struct timeval stop;
unsigned nr_pages;
- size_t off, unc_len, cmp_len;
- unsigned char *unc, *cmp, *page;
+ size_t i, off, unc_len, cmp_len;
+ unsigned char *unc, *cmp, *page[LZO_CMP_PAGES];
- page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
- if (!page) {
- printk(KERN_ERR "PM: Failed to allocate LZO page\n");
- return -ENOMEM;
+ for (i = 0; i < LZO_CMP_PAGES; i++) {
+ page[i] = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
+ if (!page[i]) {
+ printk(KERN_ERR "PM: Failed to allocate LZO page\n");
+
+ while (i)
+ free_page((unsigned long)page[--i]);
+
+ return -ENOMEM;
+ }
}
unc = vmalloc(LZO_UNC_SIZE);
if (!unc) {
printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n");
- free_page((unsigned long)page);
+
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
cmp = vmalloc(LZO_CMP_SIZE);
if (!cmp) {
printk(KERN_ERR "PM: Failed to allocate LZO compressed\n");
+
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
@@ -787,6 +801,7 @@
if (!m)
m = 1;
nr_pages = 0;
+ bio = NULL;
do_gettimeofday(&start);
error = snapshot_write_next(snapshot);
@@ -794,11 +809,11 @@
goto out_finish;
for (;;) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ error = swap_read_page(handle, page[0], NULL); /* sync */
if (error)
break;
- cmp_len = *(size_t *)page;
+ cmp_len = *(size_t *)page[0];
if (unlikely(!cmp_len ||
cmp_len > lzo1x_worst_compress(LZO_UNC_SIZE))) {
printk(KERN_ERR "PM: Invalid LZO compressed length\n");
@@ -806,13 +821,20 @@
break;
}
- memcpy(cmp, page, PAGE_SIZE);
- for (off = PAGE_SIZE; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ for (off = PAGE_SIZE, i = 1;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ error = swap_read_page(handle, page[i], &bio);
if (error)
goto out_finish;
+ }
- memcpy(cmp + off, page, PAGE_SIZE);
+ error = hib_wait_on_bio_chain(&bio); /* need all data now */
+ if (error)
+ goto out_finish;
+
+ for (off = 0, i = 0;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ memcpy(cmp + off, page[i], PAGE_SIZE);
}
unc_len = LZO_UNC_SIZE;
@@ -857,7 +879,8 @@
vfree(cmp);
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
return error;
}
diff --git a/kernel/power/user.c b/kernel/power/user.c
index e819e17..1b2ea31 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -263,6 +263,7 @@
case SNAPSHOT_UNFREEZE:
if (!data->frozen || data->ready)
break;
+ pm_restore_gfp_mask();
thaw_processes();
usermodehelper_enable();
data->frozen = 0;
@@ -275,6 +276,7 @@
error = -EPERM;
break;
}
+ pm_restore_gfp_mask();
error = hibernation_snapshot(data->platform_support);
if (!error)
error = put_user(in_suspend, (int __user *)arg);
diff --git a/kernel/printk.c b/kernel/printk.c
index 9a2264f..a23315d 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1082,13 +1082,15 @@
int printk_needs_cpu(int cpu)
{
+ if (unlikely(cpu_is_offline(cpu)))
+ printk_tick();
return per_cpu(printk_pending, cpu);
}
void wake_up_klogd(void)
{
if (waitqueue_active(&log_wait))
- __raw_get_cpu_var(printk_pending) = 1;
+ this_cpu_write(printk_pending, 1);
}
/**
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e409270..ff7e158 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -104,19 +104,24 @@
* only be modified with pm_mutex held, unless the suspend/hibernate code is
* guaranteed not to run in parallel with that modification).
*/
-void set_gfp_allowed_mask(gfp_t mask)
+
+static gfp_t saved_gfp_mask;
+
+void pm_restore_gfp_mask(void)
{
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask = mask;
+ if (saved_gfp_mask) {
+ gfp_allowed_mask = saved_gfp_mask;
+ saved_gfp_mask = 0;
+ }
}
-gfp_t clear_gfp_allowed_mask(gfp_t mask)
+void pm_restrict_gfp_mask(void)
{
- gfp_t ret = gfp_allowed_mask;
-
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask &= ~mask;
- return ret;
+ WARN_ON(saved_gfp_mask);
+ saved_gfp_mask = gfp_allowed_mask;
+ gfp_allowed_mask &= ~GFP_IOFS;
}
#endif /* CONFIG_PM_SLEEP */
diff --git a/mm/slub.c b/mm/slub.c
index 981fb73..bec0e35 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3401,13 +3401,13 @@
for_each_free_object(p, s, page->freelist) {
set_bit(slab_index(p, s, addr), map);
- if (!check_object(s, page, p, 0))
+ if (!check_object(s, page, p, SLUB_RED_INACTIVE))
return 0;
}
for_each_object(p, s, addr, page->objects)
if (!test_bit(slab_index(p, s, addr), map))
- if (!check_object(s, page, p, 1))
+ if (!check_object(s, page, p, SLUB_RED_ACTIVE))
return 0;
return 1;
}
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 184eb6a..e57826c 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -164,6 +164,7 @@
struct menu *list;
struct symbol *sym;
struct property *prompt;
+ struct expr *visibility;
struct expr *dep;
unsigned int flags;
char *help;
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 753cdbd..3f7240d 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -107,6 +107,7 @@
void menu_add_entry(struct symbol *sym);
void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
+void menu_add_visibility(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 7e83aef..b9d9aa1 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -152,6 +152,12 @@
return menu_add_prop(type, prompt, NULL, dep);
}
+void menu_add_visibility(struct expr *expr)
+{
+ current_entry->visibility = expr_alloc_and(current_entry->visibility,
+ expr);
+}
+
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
{
menu_add_prop(type, NULL, expr, dep);
@@ -410,6 +416,11 @@
if (!menu->prompt)
return false;
+ if (menu->visibility) {
+ if (expr_calc_value(menu->visibility) == no)
+ return no;
+ }
+
sym = menu->sym;
if (sym) {
sym_calc_value(sym);
diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf
index d8bc742..c9e690e 100644
--- a/scripts/kconfig/zconf.gperf
+++ b/scripts/kconfig/zconf.gperf
@@ -38,6 +38,7 @@
string, T_TYPE, TF_COMMAND, S_STRING
select, T_SELECT, TF_COMMAND
range, T_RANGE, TF_COMMAND
+visible, T_VISIBLE, TF_COMMAND
option, T_OPTION, TF_COMMAND
on, T_ON, TF_PARAM
modules, T_OPT_MODULES, TF_OPTION
diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped
index c1748fa..4055d5d 100644
--- a/scripts/kconfig/zconf.hash.c_shipped
+++ b/scripts/kconfig/zconf.hash.c_shipped
@@ -32,7 +32,7 @@
struct kconf_id;
static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-/* maximum key range = 47, duplicates = 0 */
+/* maximum key range = 50, duplicates = 0 */
#ifdef __GNUC__
__inline
@@ -46,32 +46,32 @@
{
static unsigned char asso_values[] =
{
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 11, 5,
- 0, 0, 5, 49, 5, 20, 49, 49, 5, 20,
- 5, 0, 30, 49, 0, 15, 0, 10, 0, 49,
- 25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 40, 5,
+ 0, 0, 5, 52, 0, 20, 52, 52, 10, 20,
+ 5, 0, 35, 52, 0, 30, 0, 15, 0, 52,
+ 15, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52
};
register int hval = len;
@@ -102,25 +102,26 @@
char kconf_id_strings_str12[sizeof("default")];
char kconf_id_strings_str13[sizeof("def_bool")];
char kconf_id_strings_str14[sizeof("help")];
- char kconf_id_strings_str15[sizeof("bool")];
char kconf_id_strings_str16[sizeof("config")];
char kconf_id_strings_str17[sizeof("def_tristate")];
- char kconf_id_strings_str18[sizeof("boolean")];
+ char kconf_id_strings_str18[sizeof("hex")];
char kconf_id_strings_str19[sizeof("defconfig_list")];
- char kconf_id_strings_str21[sizeof("string")];
char kconf_id_strings_str22[sizeof("if")];
char kconf_id_strings_str23[sizeof("int")];
- char kconf_id_strings_str26[sizeof("select")];
char kconf_id_strings_str27[sizeof("modules")];
char kconf_id_strings_str28[sizeof("tristate")];
char kconf_id_strings_str29[sizeof("menu")];
- char kconf_id_strings_str31[sizeof("source")];
char kconf_id_strings_str32[sizeof("comment")];
- char kconf_id_strings_str33[sizeof("hex")];
char kconf_id_strings_str35[sizeof("menuconfig")];
- char kconf_id_strings_str36[sizeof("prompt")];
- char kconf_id_strings_str37[sizeof("depends")];
+ char kconf_id_strings_str36[sizeof("string")];
+ char kconf_id_strings_str37[sizeof("visible")];
+ char kconf_id_strings_str41[sizeof("prompt")];
+ char kconf_id_strings_str42[sizeof("depends")];
+ char kconf_id_strings_str44[sizeof("bool")];
+ char kconf_id_strings_str46[sizeof("select")];
+ char kconf_id_strings_str47[sizeof("boolean")];
char kconf_id_strings_str48[sizeof("mainmenu")];
+ char kconf_id_strings_str51[sizeof("source")];
};
static struct kconf_id_strings_t kconf_id_strings_contents =
{
@@ -136,25 +137,26 @@
"default",
"def_bool",
"help",
- "bool",
"config",
"def_tristate",
- "boolean",
+ "hex",
"defconfig_list",
- "string",
"if",
"int",
- "select",
"modules",
"tristate",
"menu",
- "source",
"comment",
- "hex",
"menuconfig",
+ "string",
+ "visible",
"prompt",
"depends",
- "mainmenu"
+ "bool",
+ "select",
+ "boolean",
+ "mainmenu",
+ "source"
};
#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
#ifdef __GNUC__
@@ -168,11 +170,11 @@
{
enum
{
- TOTAL_KEYWORDS = 31,
+ TOTAL_KEYWORDS = 32,
MIN_WORD_LENGTH = 2,
MAX_WORD_LENGTH = 14,
MIN_HASH_VALUE = 2,
- MAX_HASH_VALUE = 48
+ MAX_HASH_VALUE = 51
};
static struct kconf_id wordlist[] =
@@ -191,31 +193,35 @@
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_HEX},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT},
- {-1}, {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND},
+ {-1}, {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX},
- {-1},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND},
- {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_TYPE, TF_COMMAND, S_STRING},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_VISIBLE, TF_COMMAND},
+ {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_PROMPT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_DEPENDS, TF_COMMAND},
{-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_SELECT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND},
+ {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_SOURCE, TF_COMMAND}
};
if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index 699d4b2..4c5495e 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -160,18 +160,19 @@
T_DEFAULT = 275,
T_SELECT = 276,
T_RANGE = 277,
- T_OPTION = 278,
- T_ON = 279,
- T_WORD = 280,
- T_WORD_QUOTE = 281,
- T_UNEQUAL = 282,
- T_CLOSE_PAREN = 283,
- T_OPEN_PAREN = 284,
- T_EOL = 285,
- T_OR = 286,
- T_AND = 287,
- T_EQUAL = 288,
- T_NOT = 289
+ T_VISIBLE = 278,
+ T_OPTION = 279,
+ T_ON = 280,
+ T_WORD = 281,
+ T_WORD_QUOTE = 282,
+ T_UNEQUAL = 283,
+ T_CLOSE_PAREN = 284,
+ T_OPEN_PAREN = 285,
+ T_EOL = 286,
+ T_OR = 287,
+ T_AND = 288,
+ T_EQUAL = 289,
+ T_NOT = 290
};
#endif
@@ -419,20 +420,20 @@
/* YYFINAL -- State number of the termination state. */
#define YYFINAL 11
/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 277
+#define YYLAST 290
/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 35
+#define YYNTOKENS 36
/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 48
+#define YYNNTS 50
/* YYNRULES -- Number of rules. */
-#define YYNRULES 113
+#define YYNRULES 118
/* YYNRULES -- Number of states. */
-#define YYNSTATES 185
+#define YYNSTATES 191
/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
#define YYUNDEFTOK 2
-#define YYMAXUTOK 289
+#define YYMAXUTOK 290
#define YYTRANSLATE(YYX) \
((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
@@ -468,7 +469,8 @@
2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
+ 35
};
#if YYDEBUG
@@ -478,72 +480,73 @@
{
0, 0, 3, 6, 8, 11, 13, 14, 17, 20,
23, 26, 31, 36, 40, 42, 44, 46, 48, 50,
- 52, 54, 56, 58, 60, 62, 64, 66, 70, 73,
- 77, 80, 84, 87, 88, 91, 94, 97, 100, 103,
- 106, 110, 115, 120, 125, 131, 135, 136, 140, 141,
- 144, 148, 151, 153, 157, 158, 161, 164, 167, 170,
- 173, 178, 182, 185, 190, 191, 194, 198, 200, 204,
- 205, 208, 211, 214, 218, 222, 225, 227, 231, 232,
- 235, 238, 241, 245, 249, 252, 255, 258, 259, 262,
- 265, 268, 273, 274, 277, 279, 281, 284, 287, 290,
- 292, 295, 296, 299, 301, 305, 309, 313, 316, 320,
- 324, 326, 328, 329
+ 52, 54, 56, 58, 60, 62, 64, 66, 68, 72,
+ 75, 79, 82, 86, 89, 90, 93, 96, 99, 102,
+ 105, 108, 112, 117, 122, 127, 133, 137, 138, 142,
+ 143, 146, 150, 153, 155, 159, 160, 163, 166, 169,
+ 172, 175, 180, 184, 187, 192, 193, 196, 200, 202,
+ 206, 207, 210, 213, 216, 220, 224, 228, 230, 234,
+ 235, 238, 241, 244, 248, 252, 255, 258, 261, 262,
+ 265, 268, 271, 276, 277, 280, 283, 286, 287, 290,
+ 292, 294, 297, 300, 303, 305, 308, 309, 312, 314,
+ 318, 322, 326, 329, 333, 337, 339, 341, 342
};
/* YYRHS -- A `-1'-separated list of the rules' RHS. */
static const yytype_int8 yyrhs[] =
{
- 36, 0, -1, 78, 37, -1, 37, -1, 62, 38,
- -1, 38, -1, -1, 38, 40, -1, 38, 54, -1,
- 38, 66, -1, 38, 77, -1, 38, 25, 1, 30,
- -1, 38, 39, 1, 30, -1, 38, 1, 30, -1,
+ 37, 0, -1, 81, 38, -1, 38, -1, 63, 39,
+ -1, 39, -1, -1, 39, 41, -1, 39, 55, -1,
+ 39, 67, -1, 39, 80, -1, 39, 26, 1, 31,
+ -1, 39, 40, 1, 31, -1, 39, 1, 31, -1,
16, -1, 18, -1, 19, -1, 21, -1, 17, -1,
- 22, -1, 20, -1, 30, -1, 60, -1, 70, -1,
- 43, -1, 45, -1, 68, -1, 25, 1, 30, -1,
- 1, 30, -1, 10, 25, 30, -1, 42, 46, -1,
- 11, 25, 30, -1, 44, 46, -1, -1, 46, 47,
- -1, 46, 48, -1, 46, 74, -1, 46, 72, -1,
- 46, 41, -1, 46, 30, -1, 19, 75, 30, -1,
- 18, 76, 79, 30, -1, 20, 80, 79, 30, -1,
- 21, 25, 79, 30, -1, 22, 81, 81, 79, 30,
- -1, 23, 49, 30, -1, -1, 49, 25, 50, -1,
- -1, 33, 76, -1, 7, 82, 30, -1, 51, 55,
- -1, 77, -1, 52, 57, 53, -1, -1, 55, 56,
- -1, 55, 74, -1, 55, 72, -1, 55, 30, -1,
- 55, 41, -1, 18, 76, 79, 30, -1, 19, 75,
- 30, -1, 17, 30, -1, 20, 25, 79, 30, -1,
- -1, 57, 40, -1, 14, 80, 78, -1, 77, -1,
- 58, 61, 59, -1, -1, 61, 40, -1, 61, 66,
- -1, 61, 54, -1, 3, 76, 78, -1, 4, 76,
- 30, -1, 63, 73, -1, 77, -1, 64, 67, 65,
- -1, -1, 67, 40, -1, 67, 66, -1, 67, 54,
- -1, 6, 76, 30, -1, 9, 76, 30, -1, 69,
- 73, -1, 12, 30, -1, 71, 13, -1, -1, 73,
- 74, -1, 73, 30, -1, 73, 41, -1, 16, 24,
- 80, 30, -1, -1, 76, 79, -1, 25, -1, 26,
- -1, 5, 30, -1, 8, 30, -1, 15, 30, -1,
- 30, -1, 78, 30, -1, -1, 14, 80, -1, 81,
- -1, 81, 33, 81, -1, 81, 27, 81, -1, 29,
- 80, 28, -1, 34, 80, -1, 80, 31, 80, -1,
- 80, 32, 80, -1, 25, -1, 26, -1, -1, 25,
- -1
+ 22, -1, 20, -1, 23, -1, 31, -1, 61, -1,
+ 71, -1, 44, -1, 46, -1, 69, -1, 26, 1,
+ 31, -1, 1, 31, -1, 10, 26, 31, -1, 43,
+ 47, -1, 11, 26, 31, -1, 45, 47, -1, -1,
+ 47, 48, -1, 47, 49, -1, 47, 75, -1, 47,
+ 73, -1, 47, 42, -1, 47, 31, -1, 19, 78,
+ 31, -1, 18, 79, 82, 31, -1, 20, 83, 82,
+ 31, -1, 21, 26, 82, 31, -1, 22, 84, 84,
+ 82, 31, -1, 24, 50, 31, -1, -1, 50, 26,
+ 51, -1, -1, 34, 79, -1, 7, 85, 31, -1,
+ 52, 56, -1, 80, -1, 53, 58, 54, -1, -1,
+ 56, 57, -1, 56, 75, -1, 56, 73, -1, 56,
+ 31, -1, 56, 42, -1, 18, 79, 82, 31, -1,
+ 19, 78, 31, -1, 17, 31, -1, 20, 26, 82,
+ 31, -1, -1, 58, 41, -1, 14, 83, 81, -1,
+ 80, -1, 59, 62, 60, -1, -1, 62, 41, -1,
+ 62, 67, -1, 62, 55, -1, 3, 79, 81, -1,
+ 4, 79, 31, -1, 64, 76, 74, -1, 80, -1,
+ 65, 68, 66, -1, -1, 68, 41, -1, 68, 67,
+ -1, 68, 55, -1, 6, 79, 31, -1, 9, 79,
+ 31, -1, 70, 74, -1, 12, 31, -1, 72, 13,
+ -1, -1, 74, 75, -1, 74, 31, -1, 74, 42,
+ -1, 16, 25, 83, 31, -1, -1, 76, 77, -1,
+ 76, 31, -1, 23, 82, -1, -1, 79, 82, -1,
+ 26, -1, 27, -1, 5, 31, -1, 8, 31, -1,
+ 15, 31, -1, 31, -1, 81, 31, -1, -1, 14,
+ 83, -1, 84, -1, 84, 34, 84, -1, 84, 28,
+ 84, -1, 30, 83, 29, -1, 35, 83, -1, 83,
+ 32, 83, -1, 83, 33, 83, -1, 26, -1, 27,
+ -1, -1, 26, -1
};
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 107, 107, 107, 109, 109, 111, 113, 114, 115,
- 116, 117, 118, 122, 126, 126, 126, 126, 126, 126,
- 126, 130, 131, 132, 133, 134, 135, 139, 140, 146,
- 154, 160, 168, 178, 180, 181, 182, 183, 184, 185,
- 188, 196, 202, 212, 218, 224, 227, 229, 240, 241,
- 246, 255, 260, 268, 271, 273, 274, 275, 276, 277,
- 280, 286, 297, 303, 313, 315, 320, 328, 336, 339,
- 341, 342, 343, 348, 355, 362, 367, 375, 378, 380,
- 381, 382, 385, 393, 400, 407, 413, 420, 422, 423,
- 424, 427, 435, 437, 442, 443, 446, 447, 448, 452,
- 453, 456, 457, 460, 461, 462, 463, 464, 465, 466,
- 469, 470, 473, 474
+ 0, 108, 108, 108, 110, 110, 112, 114, 115, 116,
+ 117, 118, 119, 123, 127, 127, 127, 127, 127, 127,
+ 127, 127, 131, 132, 133, 134, 135, 136, 140, 141,
+ 147, 155, 161, 169, 179, 181, 182, 183, 184, 185,
+ 186, 189, 197, 203, 213, 219, 225, 228, 230, 241,
+ 242, 247, 256, 261, 269, 272, 274, 275, 276, 277,
+ 278, 281, 287, 298, 304, 314, 316, 321, 329, 337,
+ 340, 342, 343, 344, 349, 356, 363, 368, 376, 379,
+ 381, 382, 383, 386, 394, 401, 408, 414, 421, 423,
+ 424, 425, 428, 436, 438, 439, 442, 449, 451, 456,
+ 457, 460, 461, 462, 466, 467, 470, 471, 474, 475,
+ 476, 477, 478, 479, 480, 483, 484, 487, 488
};
#endif
@@ -556,7 +559,7 @@
"T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
"T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
"T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
- "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
+ "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
"T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
"T_NOT", "$accept", "input", "start", "stmt_list", "option_name",
"common_stmt", "option_error", "config_entry_start", "config_stmt",
@@ -567,8 +570,8 @@
"if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu",
"menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt",
"comment", "comment_stmt", "help_start", "help", "depends_list",
- "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr",
- "symbol", "word_opt", 0
+ "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt",
+ "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0
};
#endif
@@ -580,25 +583,25 @@
0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
- 285, 286, 287, 288, 289
+ 285, 286, 287, 288, 289, 290
};
# endif
/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
static const yytype_uint8 yyr1[] =
{
- 0, 35, 36, 36, 37, 37, 38, 38, 38, 38,
- 38, 38, 38, 38, 39, 39, 39, 39, 39, 39,
- 39, 40, 40, 40, 40, 40, 40, 41, 41, 42,
- 43, 44, 45, 46, 46, 46, 46, 46, 46, 46,
- 47, 47, 47, 47, 47, 48, 49, 49, 50, 50,
- 51, 52, 53, 54, 55, 55, 55, 55, 55, 55,
- 56, 56, 56, 56, 57, 57, 58, 59, 60, 61,
- 61, 61, 61, 62, 63, 64, 65, 66, 67, 67,
- 67, 67, 68, 69, 70, 71, 72, 73, 73, 73,
- 73, 74, 75, 75, 76, 76, 77, 77, 77, 78,
- 78, 79, 79, 80, 80, 80, 80, 80, 80, 80,
- 81, 81, 82, 82
+ 0, 36, 37, 37, 38, 38, 39, 39, 39, 39,
+ 39, 39, 39, 39, 40, 40, 40, 40, 40, 40,
+ 40, 40, 41, 41, 41, 41, 41, 41, 42, 42,
+ 43, 44, 45, 46, 47, 47, 47, 47, 47, 47,
+ 47, 48, 48, 48, 48, 48, 49, 50, 50, 51,
+ 51, 52, 53, 54, 55, 56, 56, 56, 56, 56,
+ 56, 57, 57, 57, 57, 58, 58, 59, 60, 61,
+ 62, 62, 62, 62, 63, 64, 65, 66, 67, 68,
+ 68, 68, 68, 69, 70, 71, 72, 73, 74, 74,
+ 74, 74, 75, 76, 76, 76, 77, 78, 78, 79,
+ 79, 80, 80, 80, 81, 81, 82, 82, 83, 83,
+ 83, 83, 83, 83, 83, 84, 84, 85, 85
};
/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
@@ -606,16 +609,16 @@
{
0, 2, 2, 1, 2, 1, 0, 2, 2, 2,
2, 4, 4, 3, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 3, 2, 3,
- 2, 3, 2, 0, 2, 2, 2, 2, 2, 2,
- 3, 4, 4, 4, 5, 3, 0, 3, 0, 2,
- 3, 2, 1, 3, 0, 2, 2, 2, 2, 2,
- 4, 3, 2, 4, 0, 2, 3, 1, 3, 0,
- 2, 2, 2, 3, 3, 2, 1, 3, 0, 2,
- 2, 2, 3, 3, 2, 2, 2, 0, 2, 2,
- 2, 4, 0, 2, 1, 1, 2, 2, 2, 1,
- 2, 0, 2, 1, 3, 3, 3, 2, 3, 3,
- 1, 1, 0, 1
+ 1, 1, 1, 1, 1, 1, 1, 1, 3, 2,
+ 3, 2, 3, 2, 0, 2, 2, 2, 2, 2,
+ 2, 3, 4, 4, 4, 5, 3, 0, 3, 0,
+ 2, 3, 2, 1, 3, 0, 2, 2, 2, 2,
+ 2, 4, 3, 2, 4, 0, 2, 3, 1, 3,
+ 0, 2, 2, 2, 3, 3, 3, 1, 3, 0,
+ 2, 2, 2, 3, 3, 2, 2, 2, 0, 2,
+ 2, 2, 4, 0, 2, 2, 2, 0, 2, 1,
+ 1, 2, 2, 2, 1, 2, 0, 2, 1, 3,
+ 3, 3, 2, 3, 3, 1, 1, 0, 1
};
/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -623,165 +626,172 @@
means the default is an error. */
static const yytype_uint8 yydefact[] =
{
- 6, 0, 99, 0, 3, 0, 6, 6, 94, 95,
- 0, 1, 0, 0, 0, 0, 112, 0, 0, 0,
+ 6, 0, 104, 0, 3, 0, 6, 6, 99, 100,
+ 0, 1, 0, 0, 0, 0, 117, 0, 0, 0,
0, 0, 0, 14, 18, 15, 16, 20, 17, 19,
- 0, 21, 0, 7, 33, 24, 33, 25, 54, 64,
- 8, 69, 22, 87, 78, 9, 26, 87, 23, 10,
- 0, 100, 2, 73, 13, 0, 96, 0, 113, 0,
- 97, 0, 0, 0, 110, 111, 0, 0, 0, 103,
- 98, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 74, 82, 50, 83, 29, 31, 0, 107, 0,
- 0, 66, 0, 0, 11, 12, 0, 0, 0, 0,
- 92, 0, 0, 0, 46, 0, 39, 38, 34, 35,
- 0, 37, 36, 0, 0, 92, 0, 58, 59, 55,
- 57, 56, 65, 53, 52, 70, 72, 68, 71, 67,
- 89, 90, 88, 79, 81, 77, 80, 76, 106, 108,
- 109, 105, 104, 28, 85, 0, 101, 0, 101, 101,
- 101, 0, 0, 0, 86, 62, 101, 0, 101, 0,
- 0, 0, 40, 93, 0, 0, 101, 48, 45, 27,
- 0, 61, 0, 91, 102, 41, 42, 43, 0, 0,
- 47, 60, 63, 44, 49
+ 21, 0, 22, 0, 7, 34, 25, 34, 26, 55,
+ 65, 8, 70, 23, 93, 79, 9, 27, 88, 24,
+ 10, 0, 105, 2, 74, 13, 0, 101, 0, 118,
+ 0, 102, 0, 0, 0, 115, 116, 0, 0, 0,
+ 108, 103, 0, 0, 0, 0, 0, 0, 0, 88,
+ 0, 0, 75, 83, 51, 84, 30, 32, 0, 112,
+ 0, 0, 67, 0, 0, 11, 12, 0, 0, 0,
+ 0, 97, 0, 0, 0, 47, 0, 40, 39, 35,
+ 36, 0, 38, 37, 0, 0, 97, 0, 59, 60,
+ 56, 58, 57, 66, 54, 53, 71, 73, 69, 72,
+ 68, 106, 95, 0, 94, 80, 82, 78, 81, 77,
+ 90, 91, 89, 111, 113, 114, 110, 109, 29, 86,
+ 0, 106, 0, 106, 106, 106, 0, 0, 0, 87,
+ 63, 106, 0, 106, 0, 96, 0, 0, 41, 98,
+ 0, 0, 106, 49, 46, 28, 0, 62, 0, 107,
+ 92, 42, 43, 44, 0, 0, 48, 61, 64, 45,
+ 50
};
/* YYDEFGOTO[NTERM-NUM]. */
static const yytype_int16 yydefgoto[] =
{
- -1, 3, 4, 5, 32, 33, 107, 34, 35, 36,
- 37, 73, 108, 109, 152, 180, 38, 39, 123, 40,
- 75, 119, 76, 41, 127, 42, 77, 6, 43, 44,
- 135, 45, 79, 46, 47, 48, 110, 111, 78, 112,
- 147, 148, 49, 7, 161, 68, 69, 59
+ -1, 3, 4, 5, 33, 34, 108, 35, 36, 37,
+ 38, 74, 109, 110, 157, 186, 39, 40, 124, 41,
+ 76, 120, 77, 42, 128, 43, 78, 6, 44, 45,
+ 137, 46, 80, 47, 48, 49, 111, 112, 81, 113,
+ 79, 134, 152, 153, 50, 7, 165, 69, 70, 60
};
/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
STATE-NUM. */
-#define YYPACT_NINF -89
+#define YYPACT_NINF -90
static const yytype_int16 yypact[] =
{
- 3, 4, -89, 20, -89, 100, -89, 7, -89, -89,
- -8, -89, 17, 4, 28, 4, 37, 36, 4, 68,
- 87, -18, 69, -89, -89, -89, -89, -89, -89, -89,
- 128, -89, 138, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- 127, -89, -89, 110, -89, 126, -89, 136, -89, 137,
- -89, 147, 150, 152, -89, -89, -18, -18, 171, -14,
- -89, 153, 157, 34, 67, 180, 233, 220, 207, 220,
- 154, -89, -89, -89, -89, -89, -89, 0, -89, -18,
- -18, 110, 44, 44, -89, -89, 163, 174, 182, 4,
- 4, -18, 194, 44, -89, 219, -89, -89, -89, -89,
- 223, -89, -89, 203, 4, 4, 215, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, 213,
- -89, -89, -89, -89, -89, -18, 232, 227, 232, -5,
- 232, 44, 35, 234, -89, -89, 232, 235, 232, 224,
- -18, 236, -89, -89, 237, 238, 232, 216, -89, -89,
- 240, -89, 241, -89, 71, -89, -89, -89, 242, 4,
- -89, -89, -89, -89, -89
+ 4, 42, -90, 96, -90, 111, -90, 15, -90, -90,
+ 75, -90, 82, 42, 104, 42, 110, 107, 42, 115,
+ 125, -4, 121, -90, -90, -90, -90, -90, -90, -90,
+ -90, 162, -90, 163, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 139, -90, -90, 138, -90, 142, -90, 143, -90,
+ 152, -90, 164, 167, 168, -90, -90, -4, -4, 77,
+ -18, -90, 177, 185, 33, 71, 195, 247, 236, -2,
+ 236, 171, -90, -90, -90, -90, -90, -90, 41, -90,
+ -4, -4, 138, 97, 97, -90, -90, 186, 187, 194,
+ 42, 42, -4, 196, 97, -90, 219, -90, -90, -90,
+ -90, 210, -90, -90, 204, 42, 42, 199, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 222, -90, 223, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, 215, -90, -90, -90, -90, -90,
+ -4, 222, 228, 222, -5, 222, 97, 35, 229, -90,
+ -90, 222, 232, 222, -4, -90, 135, 233, -90, -90,
+ 234, 235, 222, 240, -90, -90, 237, -90, 239, -13,
+ -90, -90, -90, -90, 244, 42, -90, -90, -90, -90,
+ -90
};
/* YYPGOTO[NTERM-NUM]. */
static const yytype_int16 yypgoto[] =
{
- -89, -89, 255, 267, -89, 47, -57, -89, -89, -89,
- -89, 239, -89, -89, -89, -89, -89, -89, -89, 130,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, 181, -89, -89, -89, -89, -89, 199, 229, 16,
- 162, -1, 74, -7, 103, -65, -88, -89
+ -90, -90, 269, 271, -90, 23, -70, -90, -90, -90,
+ -90, 243, -90, -90, -90, -90, -90, -90, -90, -48,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, -20, -90, -90, -90, -90, -90, 206, 205, -68,
+ -90, -90, 169, -1, 27, -7, 118, -66, -89, -90
};
/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
positive, shift that token. If negative, reduce the rule which
number is the opposite. If zero, do what YYDEFACT says.
If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -85
+#define YYTABLE_NINF -86
static const yytype_int16 yytable[] =
{
- 10, 87, 88, 53, 141, 142, 1, 64, 65, 160,
- 1, 66, 55, 92, 57, 151, 67, 61, 118, 93,
- 11, 131, 2, 131, 139, 140, 89, 90, 138, 8,
- 9, 89, 90, 2, -30, 96, 149, 51, -30, -30,
- -30, -30, -30, -30, -30, -30, 97, 54, -30, -30,
- 98, -30, 99, 100, 101, 102, 103, 104, 56, 105,
- 167, 91, 58, 166, 106, 168, 60, -32, 96, 64,
- 65, -32, -32, -32, -32, -32, -32, -32, -32, 97,
- 159, -32, -32, 98, -32, 99, 100, 101, 102, 103,
- 104, 121, 105, 62, 132, 174, 132, 106, 146, 70,
- -5, 12, 89, 90, 13, 14, 15, 16, 17, 18,
- 19, 20, 63, 156, 21, 22, 23, 24, 25, 26,
- 27, 28, 29, 122, 125, 30, 133, -4, 12, 71,
- 31, 13, 14, 15, 16, 17, 18, 19, 20, 72,
- 51, 21, 22, 23, 24, 25, 26, 27, 28, 29,
- 124, 129, 30, 137, -84, 96, 81, 31, -84, -84,
- -84, -84, -84, -84, -84, -84, 82, 83, -84, -84,
- 98, -84, -84, -84, -84, -84, -84, 84, 184, 105,
- 85, 96, 86, 94, 130, -51, -51, 95, -51, -51,
- -51, -51, 97, 143, -51, -51, 98, 113, 114, 115,
- 116, 2, 89, 90, 144, 105, 145, 126, 96, 134,
- 117, -75, -75, -75, -75, -75, -75, -75, -75, 150,
- 153, -75, -75, 98, 13, 14, 15, 16, 17, 18,
- 19, 20, 105, 155, 21, 22, 154, 130, 14, 15,
- 158, 17, 18, 19, 20, 90, 160, 21, 22, 179,
- 31, 163, 164, 165, 173, 89, 90, 162, 128, 170,
- 136, 172, 52, 31, 169, 171, 175, 176, 177, 178,
- 181, 182, 183, 50, 120, 74, 80, 157
+ 10, 88, 89, 54, 146, 147, 119, 1, 122, 164,
+ 93, 141, 56, 142, 58, 156, 94, 62, 1, 90,
+ 91, 131, 65, 66, 144, 145, 67, 90, 91, 132,
+ 127, 68, 136, -31, 97, 2, 154, -31, -31, -31,
+ -31, -31, -31, -31, -31, 98, 52, -31, -31, 99,
+ -31, 100, 101, 102, 103, 104, -31, 105, 129, 106,
+ 138, 173, 92, 141, 107, 142, 174, 172, 8, 9,
+ 143, -33, 97, 90, 91, -33, -33, -33, -33, -33,
+ -33, -33, -33, 98, 166, -33, -33, 99, -33, 100,
+ 101, 102, 103, 104, -33, 105, 11, 106, 179, 151,
+ 123, 126, 107, 135, 125, 130, 2, 139, 2, 90,
+ 91, -5, 12, 55, 161, 13, 14, 15, 16, 17,
+ 18, 19, 20, 65, 66, 21, 22, 23, 24, 25,
+ 26, 27, 28, 29, 30, 57, 59, 31, 61, -4,
+ 12, 63, 32, 13, 14, 15, 16, 17, 18, 19,
+ 20, 64, 71, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 30, 72, 73, 31, 180, 90, 91, 52,
+ 32, -85, 97, 82, 83, -85, -85, -85, -85, -85,
+ -85, -85, -85, 84, 190, -85, -85, 99, -85, -85,
+ -85, -85, -85, -85, -85, 85, 97, 106, 86, 87,
+ -52, -52, 140, -52, -52, -52, -52, 98, 95, -52,
+ -52, 99, 114, 115, 116, 117, 96, 148, 149, 150,
+ 158, 106, 155, 159, 97, 163, 118, -76, -76, -76,
+ -76, -76, -76, -76, -76, 160, 164, -76, -76, 99,
+ 13, 14, 15, 16, 17, 18, 19, 20, 91, 106,
+ 21, 22, 14, 15, 140, 17, 18, 19, 20, 168,
+ 175, 21, 22, 177, 181, 182, 183, 32, 187, 167,
+ 188, 169, 170, 171, 185, 189, 53, 51, 32, 176,
+ 75, 178, 121, 0, 133, 162, 0, 0, 0, 0,
+ 184
};
-static const yytype_uint8 yycheck[] =
+static const yytype_int16 yycheck[] =
{
- 1, 66, 67, 10, 92, 93, 3, 25, 26, 14,
- 3, 29, 13, 27, 15, 103, 34, 18, 75, 33,
- 0, 78, 30, 80, 89, 90, 31, 32, 28, 25,
- 26, 31, 32, 30, 0, 1, 101, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 12, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 30, 25,
- 25, 68, 25, 151, 30, 30, 30, 0, 1, 25,
- 26, 4, 5, 6, 7, 8, 9, 10, 11, 12,
- 145, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 75, 25, 25, 78, 160, 80, 30, 99, 30,
- 0, 1, 31, 32, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 114, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 76, 77, 25, 79, 0, 1, 1,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 1,
- 30, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 76, 77, 25, 79, 0, 1, 30, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 30, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 30, 179, 25,
- 30, 1, 30, 30, 30, 5, 6, 30, 8, 9,
- 10, 11, 12, 30, 14, 15, 16, 17, 18, 19,
- 20, 30, 31, 32, 30, 25, 24, 77, 1, 79,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 25,
- 1, 14, 15, 16, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 30, 14, 15, 13, 30, 5, 6,
- 25, 8, 9, 10, 11, 32, 14, 14, 15, 33,
- 30, 148, 149, 150, 30, 31, 32, 30, 77, 156,
- 79, 158, 7, 30, 30, 30, 30, 30, 30, 166,
- 30, 30, 30, 6, 75, 36, 47, 115
+ 1, 67, 68, 10, 93, 94, 76, 3, 76, 14,
+ 28, 81, 13, 81, 15, 104, 34, 18, 3, 32,
+ 33, 23, 26, 27, 90, 91, 30, 32, 33, 31,
+ 78, 35, 80, 0, 1, 31, 102, 4, 5, 6,
+ 7, 8, 9, 10, 11, 12, 31, 14, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 78, 26,
+ 80, 26, 69, 133, 31, 133, 31, 156, 26, 27,
+ 29, 0, 1, 32, 33, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 150, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 24, 0, 26, 164, 100,
+ 77, 78, 31, 80, 77, 78, 31, 80, 31, 32,
+ 33, 0, 1, 31, 115, 4, 5, 6, 7, 8,
+ 9, 10, 11, 26, 27, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 26, 26, 31, 0,
+ 1, 26, 31, 4, 5, 6, 7, 8, 9, 10,
+ 11, 26, 31, 14, 15, 16, 17, 18, 19, 20,
+ 21, 22, 23, 1, 1, 26, 31, 32, 33, 31,
+ 31, 0, 1, 31, 31, 4, 5, 6, 7, 8,
+ 9, 10, 11, 31, 185, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 1, 26, 31, 31,
+ 5, 6, 31, 8, 9, 10, 11, 12, 31, 14,
+ 15, 16, 17, 18, 19, 20, 31, 31, 31, 25,
+ 1, 26, 26, 13, 1, 26, 31, 4, 5, 6,
+ 7, 8, 9, 10, 11, 31, 14, 14, 15, 16,
+ 4, 5, 6, 7, 8, 9, 10, 11, 33, 26,
+ 14, 15, 5, 6, 31, 8, 9, 10, 11, 31,
+ 31, 14, 15, 31, 31, 31, 31, 31, 31, 151,
+ 31, 153, 154, 155, 34, 31, 7, 6, 31, 161,
+ 37, 163, 76, -1, 79, 116, -1, -1, -1, -1,
+ 172
};
/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
symbol of state STATE-NUM. */
static const yytype_uint8 yystos[] =
{
- 0, 3, 30, 36, 37, 38, 62, 78, 25, 26,
- 76, 0, 1, 4, 5, 6, 7, 8, 9, 10,
+ 0, 3, 31, 37, 38, 39, 63, 81, 26, 27,
+ 79, 0, 1, 4, 5, 6, 7, 8, 9, 10,
11, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 25, 30, 39, 40, 42, 43, 44, 45, 51, 52,
- 54, 58, 60, 63, 64, 66, 68, 69, 70, 77,
- 38, 30, 37, 78, 30, 76, 30, 76, 25, 82,
- 30, 76, 25, 25, 25, 26, 29, 34, 80, 81,
- 30, 1, 1, 46, 46, 55, 57, 61, 73, 67,
- 73, 30, 30, 30, 30, 30, 30, 80, 80, 31,
- 32, 78, 27, 33, 30, 30, 1, 12, 16, 18,
- 19, 20, 21, 22, 23, 25, 30, 41, 47, 48,
- 71, 72, 74, 17, 18, 19, 20, 30, 41, 56,
- 72, 74, 40, 53, 77, 40, 54, 59, 66, 77,
- 30, 41, 74, 40, 54, 65, 66, 77, 28, 80,
- 80, 81, 81, 30, 30, 24, 76, 75, 76, 80,
- 25, 81, 49, 1, 13, 30, 76, 75, 25, 80,
- 14, 79, 30, 79, 79, 79, 81, 25, 30, 30,
- 79, 30, 79, 30, 80, 30, 30, 30, 79, 33,
- 50, 30, 30, 30, 76
+ 23, 26, 31, 40, 41, 43, 44, 45, 46, 52,
+ 53, 55, 59, 61, 64, 65, 67, 69, 70, 71,
+ 80, 39, 31, 38, 81, 31, 79, 31, 79, 26,
+ 85, 31, 79, 26, 26, 26, 27, 30, 35, 83,
+ 84, 31, 1, 1, 47, 47, 56, 58, 62, 76,
+ 68, 74, 31, 31, 31, 31, 31, 31, 83, 83,
+ 32, 33, 81, 28, 34, 31, 31, 1, 12, 16,
+ 18, 19, 20, 21, 22, 24, 26, 31, 42, 48,
+ 49, 72, 73, 75, 17, 18, 19, 20, 31, 42,
+ 57, 73, 75, 41, 54, 80, 41, 55, 60, 67,
+ 80, 23, 31, 74, 77, 41, 55, 66, 67, 80,
+ 31, 42, 75, 29, 83, 83, 84, 84, 31, 31,
+ 25, 79, 78, 79, 83, 26, 84, 50, 1, 13,
+ 31, 79, 78, 26, 14, 82, 83, 82, 31, 82,
+ 82, 82, 84, 26, 31, 31, 82, 31, 82, 83,
+ 31, 31, 31, 31, 82, 34, 51, 31, 31, 31,
+ 79
};
#define yyerrok (yyerrstatus = 0)
@@ -1292,7 +1302,7 @@
switch (yytype)
{
- case 52: /* "choice_entry" */
+ case 53: /* "choice_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1302,7 +1312,7 @@
};
break;
- case 58: /* "if_entry" */
+ case 59: /* "if_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1312,7 +1322,7 @@
};
break;
- case 64: /* "menu_entry" */
+ case 65: /* "menu_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1644,17 +1654,17 @@
{ zconf_error("invalid statement"); ;}
break;
- case 27:
+ case 28:
{ zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;}
break;
- case 28:
+ case 29:
{ zconf_error("invalid option"); ;}
break;
- case 29:
+ case 30:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
@@ -1664,7 +1674,7 @@
;}
break;
- case 30:
+ case 31:
{
menu_end_entry();
@@ -1672,7 +1682,7 @@
;}
break;
- case 31:
+ case 32:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
@@ -1682,7 +1692,7 @@
;}
break;
- case 32:
+ case 33:
{
if (current_entry->prompt)
@@ -1694,7 +1704,7 @@
;}
break;
- case 40:
+ case 41:
{
menu_set_type((yyvsp[(1) - (3)].id)->stype);
@@ -1704,7 +1714,7 @@
;}
break;
- case 41:
+ case 42:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
@@ -1712,7 +1722,7 @@
;}
break;
- case 42:
+ case 43:
{
menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
@@ -1724,7 +1734,7 @@
;}
break;
- case 43:
+ case 44:
{
menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
@@ -1732,7 +1742,7 @@
;}
break;
- case 44:
+ case 45:
{
menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
@@ -1740,7 +1750,7 @@
;}
break;
- case 47:
+ case 48:
{
struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
@@ -1752,17 +1762,17 @@
;}
break;
- case 48:
+ case 49:
{ (yyval.string) = NULL; ;}
break;
- case 49:
+ case 50:
{ (yyval.string) = (yyvsp[(2) - (2)].string); ;}
break;
- case 50:
+ case 51:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE);
@@ -1773,14 +1783,14 @@
;}
break;
- case 51:
+ case 52:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 52:
+ case 53:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
@@ -1790,7 +1800,7 @@
;}
break;
- case 60:
+ case 61:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
@@ -1798,7 +1808,7 @@
;}
break;
- case 61:
+ case 62:
{
if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
@@ -1811,7 +1821,7 @@
;}
break;
- case 62:
+ case 63:
{
current_entry->sym->flags |= SYMBOL_OPTIONAL;
@@ -1819,7 +1829,7 @@
;}
break;
- case 63:
+ case 64:
{
if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
@@ -1831,7 +1841,7 @@
;}
break;
- case 66:
+ case 67:
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
@@ -1841,7 +1851,7 @@
;}
break;
- case 67:
+ case 68:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
@@ -1851,14 +1861,14 @@
;}
break;
- case 73:
+ case 74:
{
menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
;}
break;
- case 74:
+ case 75:
{
menu_add_entry(NULL);
@@ -1867,14 +1877,14 @@
;}
break;
- case 75:
+ case 76:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 76:
+ case 77:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
@@ -1884,7 +1894,7 @@
;}
break;
- case 82:
+ case 83:
{
printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
@@ -1892,7 +1902,7 @@
;}
break;
- case 83:
+ case 84:
{
menu_add_entry(NULL);
@@ -1901,14 +1911,14 @@
;}
break;
- case 84:
+ case 85:
{
menu_end_entry();
;}
break;
- case 85:
+ case 86:
{
printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
@@ -1916,14 +1926,14 @@
;}
break;
- case 86:
+ case 87:
{
current_entry->help = (yyvsp[(2) - (2)].string);
;}
break;
- case 91:
+ case 92:
{
menu_add_dep((yyvsp[(3) - (4)].expr));
@@ -1931,85 +1941,92 @@
;}
break;
- case 93:
+ case 96:
+
+ {
+ menu_add_visibility((yyvsp[(2) - (2)].expr));
+;}
+ break;
+
+ case 98:
{
menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
;}
break;
- case 96:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
- break;
-
- case 97:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
- break;
-
- case 98:
-
- { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
- break;
-
case 101:
- { (yyval.expr) = NULL; ;}
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
case 102:
- { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
case 103:
- { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
- break;
-
- case 104:
-
- { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
- break;
-
- case 105:
-
- { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
case 106:
- { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
+ { (yyval.expr) = NULL; ;}
break;
case 107:
- { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
+ { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
break;
case 108:
- { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
break;
case 109:
- { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
case 110:
- { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
+ { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
case 111:
- { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;}
+ { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
break;
case 112:
+ { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
+ break;
+
+ case 113:
+
+ { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ break;
+
+ case 114:
+
+ { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ break;
+
+ case 115:
+
+ { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
+ break;
+
+ case 116:
+
+ { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;}
+ break;
+
+ case 117:
+
{ (yyval.string) = NULL; ;}
break;
@@ -2278,6 +2295,7 @@
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 2abd3c7..49fb4ab 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -36,7 +36,7 @@
#define YYERROR_VERBOSE
#endif
%}
-%expect 28
+%expect 30
%union
{
@@ -68,6 +68,7 @@
%token <id>T_DEFAULT
%token <id>T_SELECT
%token <id>T_RANGE
+%token <id>T_VISIBLE
%token <id>T_OPTION
%token <id>T_ON
%token <string> T_WORD
@@ -123,7 +124,7 @@
;
option_name:
- T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT
+ T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE
;
common_stmt:
@@ -359,7 +360,7 @@
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
-menu_entry: menu depends_list
+menu_entry: menu visibility_list depends_list
{
$$ = menu_add_menu();
};
@@ -430,6 +431,19 @@
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
};
+/* visibility option */
+
+visibility_list:
+ /* empty */
+ | visibility_list visible
+ | visibility_list T_EOL
+;
+
+visible: T_VISIBLE if_expr
+{
+ menu_add_visibility($2);
+};
+
/* prompt statement */
prompt_stmt_opt:
@@ -526,6 +540,7 @@
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 5c8c7df..b753ec6 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1510,16 +1510,19 @@
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
{
struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ int i;
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
- if (substream != NULL) {
+ for (i = 0; i < 2; i++) {
+ substream = pcm_oss_file->streams[i];
+ if (!substream)
+ continue;
+ runtime = substream->runtime;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
- }
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE];
- if (substream != NULL) {
- snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
+ runtime->oss.prepare = 1;
+ runtime->oss.buffer_used = 0;
+ runtime->oss.prev_hw_ptr_period = 0;
+ runtime->oss.period_ptr = 0;
}
return 0;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 886d7c7..8fddc9d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9865,7 +9865,6 @@
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5c71080..efa4225 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1627,6 +1627,8 @@
static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
"Alienware M17x", STAC_ALIENWARE_M17X),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
{} /* terminator */
};
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 6313858..e725c09 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -526,7 +526,7 @@
snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
snd_soc_add_controls(codec, wm8731_snd_controls,
ARRAY_SIZE(wm8731_snd_controls));
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 0d7dcf1..7d7847a 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -498,6 +498,7 @@
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 63b9eaa..026b756 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -498,6 +498,7 @@
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index e00e39d..dac6732 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -49,7 +49,7 @@
mutex_lock(&ac97_mutex);
val = nuc900_checkready();
- if (!!val) {
+ if (val) {
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
goto out;
}
@@ -102,7 +102,7 @@
mutex_lock(&ac97_mutex);
tmp = nuc900_checkready();
- if (!!tmp)
+ if (tmp)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
/* clear the R_WB bit and write register index */
@@ -149,7 +149,7 @@
udelay(100);
val = nuc900_checkready();
- if (!!val)
+ if (val)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
mutex_unlock(&ac97_mutex);
@@ -263,8 +263,7 @@
return ret;
}
-static int nuc900_ac97_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_probe(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
unsigned long val;
@@ -284,12 +283,12 @@
return 0;
}
-static void nuc900_ac97_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_remove(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
clk_disable(nuc900_audio->clk);
+ return 0;
}
static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
@@ -313,7 +312,7 @@
.channels_max = 2,
},
.ops = &nuc900_ac97_dai_ops,
-}
+};
static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
{
diff --git a/sound/soc/nuc900/nuc900-audio.h b/sound/soc/nuc900/nuc900-audio.h
index aeed8ea..59f7e8e 100644
--- a/sound/soc/nuc900/nuc900-audio.h
+++ b/sound/soc/nuc900/nuc900-audio.h
@@ -110,4 +110,6 @@
};
+extern struct nuc900_audio *nuc900_ac97_data;
+
#endif /*end _NUC900_AUDIO_H */
diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c
index 195d1ac..8263f56 100644
--- a/sound/soc/nuc900/nuc900-pcm.c
+++ b/sound/soc/nuc900/nuc900-pcm.c
@@ -50,12 +50,12 @@
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&nuc900_audio->lock, flags);
-
ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (ret < 0)
return ret;
+ spin_lock_irqsave(&nuc900_audio->lock, flags);
+
nuc900_audio->substream = substream;
nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
nuc900_audio->buffersize[substream->stream] =
@@ -169,6 +169,7 @@
struct snd_pcm_runtime *runtime = substream->runtime;
struct nuc900_audio *nuc900_audio = runtime->private_data;
unsigned long flags, val;
+ int ret = 0;
spin_lock_irqsave(&nuc900_audio->lock, flags);
@@ -197,10 +198,10 @@
AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
spin_unlock_irqrestore(&nuc900_audio->lock, flags);
- return 0;
+ return ret;
}
static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
@@ -332,7 +333,7 @@
.ops = &nuc900_dma_ops,
.pcm_new = nuc900_dma_new,
.pcm_free = nuc900_dma_free_dma_buffers,
-}
+};
static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev)
{
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d542ea2..a088db6 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -12,8 +12,8 @@
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+ depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
- select OMAP_MUX
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 8778faa..3052f64 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -434,7 +434,7 @@
.rate_max = 1562500,
},
.ops = &s6000_i2s_dai_ops,
-}
+};
static int __devinit s6000_i2s_probe(struct platform_device *pdev)
{
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 271fd22..ab3ccae 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -473,7 +473,7 @@
}
res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- s6000_soc_platform.name, pcm);
+ "s6000-audio", pcm);
if (res) {
printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
return res;
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
index 96c05e1..c1244c5 100644
--- a/sound/soc/s6000/s6105-ipcam.c
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -167,7 +167,7 @@
snd_soc_dapm_sync(codec);
- snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec));
+ snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec));
return 0;
}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index e2c2de2..564491f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -197,7 +197,7 @@
if (child_pid > 0)
kill(child_pid, SIGTERM);
- if (signr == -1)
+ if (signr == -1 || signr == SIGUSR1)
return;
signal(signr, SIG_DFL);
@@ -515,6 +515,7 @@
atexit(sig_atexit);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
+ signal(SIGUSR1, sig_handler);
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
@@ -606,6 +607,7 @@
execvp(argv[0], (char **)argv);
perror(argv[0]);
+ kill(getppid(), SIGUSR1);
exit(-1);
}
@@ -762,7 +764,7 @@
}
}
- if (quiet)
+ if (quiet || signr == SIGUSR1)
return 0;
fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index d7e67b1..64a85ba 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -946,11 +946,16 @@
/*
* We set id to -1 if the data file doesn't contain sample
- * ids. Check for this and avoid walking through the entire
- * list of ids which may be large.
+ * ids. This can happen when the data file contains one type
+ * of event and in that case, the header can still store the
+ * event attribute information. Check for this and avoid
+ * walking through the entire list of ids which may be large.
*/
- if (id == -1ULL)
+ if (id == -1ULL) {
+ if (header->attrs > 0)
+ return &header->attr[0]->attr;
return NULL;
+ }
for (i = 0; i < header->attrs; i++) {
struct perf_header_attr *attr = header->attr[i];
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 0500895..d628c8d 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -532,7 +532,7 @@
struct machine *machine = kmaps->machine;
struct map *curr_map = map;
struct symbol *pos;
- int count = 0;
+ int count = 0, moved = 0;
struct rb_root *root = &self->symbols[map->type];
struct rb_node *next = rb_first(root);
int kernel_range = 0;
@@ -590,6 +590,11 @@
char dso_name[PATH_MAX];
struct dso *dso;
+ if (count == 0) {
+ curr_map = map;
+ goto filter_symbol;
+ }
+
if (self->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
@@ -615,7 +620,7 @@
map_groups__insert(kmaps, curr_map);
++kernel_range;
}
-
+filter_symbol:
if (filter && filter(curr_map, pos)) {
discard_symbol: rb_erase(&pos->rb_node, root);
symbol__delete(pos);
@@ -623,8 +628,9 @@
if (curr_map != map) {
rb_erase(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
- }
- count++;
+ ++moved;
+ } else
+ ++count;
}
}
@@ -634,7 +640,7 @@
dso__set_loaded(curr_map->dso, curr_map->type);
}
- return count;
+ return count + moved;
}
int dso__load_kallsyms(struct dso *self, const char *filename,
@@ -2125,14 +2131,55 @@
return kernel;
}
+struct process_args {
+ u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+ char type __used, u64 start)
+{
+ struct process_args *args = arg;
+
+ if (strchr(name, '['))
+ return 0;
+
+ args->start = start;
+ return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+ const char *filename;
+ char path[PATH_MAX];
+ struct process_args args;
+
+ if (machine__is_host(machine)) {
+ filename = "/proc/kallsyms";
+ } else {
+ if (machine__is_default_guest(machine))
+ filename = (char *)symbol_conf.default_guest_kallsyms;
+ else {
+ sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+ filename = path;
+ }
+ }
+
+ if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
{
enum map_type type;
+ u64 start = machine__get_kernel_start_addr(self);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- self->vmlinux_maps[type] = map__new2(0, kernel, type);
+ self->vmlinux_maps[type] = map__new2(start, kernel, type);
if (self->vmlinux_maps[type] == NULL)
return -1;
diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S
index 792a750..c14322d 100644
--- a/usr/initramfs_data.S
+++ b/usr/initramfs_data.S
@@ -22,14 +22,15 @@
*/
#include <linux/stringify.h>
+#include <asm-generic/vmlinux.lds.h>
.section .init.ramfs,"a"
__irf_start:
.incbin __stringify(INITRAMFS_IMAGE)
__irf_end:
.section .init.ramfs.info,"a"
-.globl __initramfs_size
-__initramfs_size:
+.globl VMLINUX_SYMBOL(__initramfs_size)
+VMLINUX_SYMBOL(__initramfs_size):
#ifdef CONFIG_64BIT
.quad __irf_end - __irf_start
#else