[ARM] 5259/2: [AT91] PWM LEDs on AT91SAM9263-EK
Use the PWM controller and leds-atmel-pwm.c driver to drive a LED on
the Atmel AT91SAM9263-EK board.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ad71f4a..2924b68 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -30,6 +30,7 @@
#include <linux/fb.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/leds.h>
#include <video/atmel_lcdc.h>
@@ -339,25 +340,32 @@
* LEDs ... these could all be PWM-driven, for variable brightness
*/
static struct gpio_led ek_leds[] = {
- { /* "left" led, green, userled1, pwm1 */
- .name = "ds1",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "right" led, green, userled2, pwm2 */
+ { /* "right" led, green, userled2 (could be driven by pwm2) */
.name = "ds2",
.gpio = AT91_PIN_PC29,
.active_low = 1,
.default_trigger = "nand-disk",
},
- { /* "power" led, yellow, pwm0 */
+ { /* "power" led, yellow (could be driven by pwm0) */
.name = "ds3",
.gpio = AT91_PIN_PB7,
.default_trigger = "heartbeat",
}
};
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+ /* For now only DS1 is PWM-driven (by pwm1) */
+ {
+ .name = "ds1",
+ .gpio = 1, /* is PWM channel number */
+ .active_low = 1,
+ .default_trigger = "none",
+ }
+};
+
static void __init ek_board_init(void)
{
@@ -388,6 +396,7 @@
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 9df4608..e852609 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -175,6 +175,7 @@
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index fec03c5..ff76d59 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -21,8 +22,6 @@
#if defined(CONFIG_NEW_LEDS)
-#include <linux/platform_device.h>
-
/*
* New cross-platform LED support.
*/
@@ -57,6 +56,44 @@
/* ------------------------------------------------------------------------- */
+#if defined (CONFIG_LEDS_ATMEL_PWM)
+
+/*
+ * PWM Leds
+ */
+
+static struct gpio_led_platform_data pwm_led_data;
+
+static struct platform_device at91_pwm_leds = {
+ .name = "leds-atmel-pwm",
+ .id = -1,
+ .dev.platform_data = &pwm_led_data,
+};
+
+void __init at91_pwm_leds(struct gpio_led *leds, int nr)
+{
+ int i;
+ u32 pwm_mask = 0;
+
+ if (!nr)
+ return;
+
+ for (i = 0; i < nr; i++)
+ pwm_mask |= (1 << leds[i].gpio);
+
+ pwm_led_data.leds = leds;
+ pwm_led_data.num_leds = nr;
+
+ at91_add_device_pwm(pwm_mask);
+ platform_device_register(&at91_pwm_leds);
+}
+#else
+void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
#if defined(CONFIG_LEDS)
#include <asm/leds.h>