blob: d96ec7c09dcaab1580cbfd9bf3e1435dd151615e [file] [log] [blame]
/*
handle em28xx IR remotes via linux kernel input layer.
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/usb.h>
#include "em28xx.h"
#define EM28XX_SNAPSHOT_KEY KEY_CAMERA
#define EM28XX_SBUTTON_QUERY_INTERVAL 500
#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
#define i2cdprintk(fmt, arg...) \
if (ir_debug) { \
printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
}
#define dprintk(fmt, arg...) \
if (ir_debug) { \
printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
}
/**********************************************************
Polling structure used by em28xx IR's
**********************************************************/
struct em28xx_ir_poll_result {
unsigned int toggle_bit:1;
unsigned int read_count:7;
u8 rc_address;
u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
};
struct em28xx_IR {
struct em28xx *dev;
struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
/* poll external decoder */
int polling;
struct delayed_work work;
unsigned int last_toggle:1;
unsigned int full_code:1;
unsigned int last_readcount;
unsigned int repeat_interval;
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
};
/**********************************************************
I2C IR based get keycodes - should be used with ir-kbd-i2c
**********************************************************/
int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
/* poll IR chip */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
i2cdprintk("read error\n");
return -EIO;
}
/* it seems that 0xFE indicates that a button is still hold
down, while 0xff indicates that no button is hold
down. 0xfe sequences are sometimes interrupted by 0xFF */
i2cdprintk("key %02x\n", b);
if (b == 0xff)
return 0;
if (b == 0xfe)
/* keep old data */
return 1;
*ir_key = b;
*ir_raw = b;
return 1;
}
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char buf[2];
unsigned char code;
/* poll IR chip */
if (2 != i2c_master_recv(ir->c, buf, 2))
return -EIO;
/* Does eliminate repeated parity code */
if (buf[1] == 0xff)
return 0;
ir->old = buf[1];
/* Rearranges bits to the right order */
code = ((buf[0]&0x01)<<5) | /* 0010 0000 */
((buf[0]&0x02)<<3) | /* 0001 0000 */
((buf[0]&0x04)<<1) | /* 0000 1000 */
((buf[0]&0x08)>>1) | /* 0000 0100 */
((buf[0]&0x10)>>3) | /* 0000 0010 */
((buf[0]&0x20)>>5); /* 0000 0001 */
i2cdprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",
code, buf[0]);
/* return key */
*ir_key = code;
*ir_raw = code;
return 1;
}
int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw)
{
unsigned char buf[3];
/* poll IR chip */
if (3 != i2c_master_recv(ir->c, buf, 3)) {
i2cdprintk("read error\n");
return -EIO;
}
i2cdprintk("key %02x\n", buf[2]&0x3f);
if (buf[0] != 0x00)
return 0;
*ir_key = buf[2]&0x3f;
*ir_raw = buf[2]&0x3f;
return 1;
}
/**********************************************************
Poll based get keycode functions
**********************************************************/
/* This is for the em2860/em2880 */
static int default_polling_getkey(struct em28xx_IR *ir,
struct em28xx_ir_poll_result *poll_result)
{
struct em28xx *dev = ir->dev;
int rc;
u8 msg[3] = { 0, 0, 0 };
/* Read key toggle, brand, and key code
on registers 0x45, 0x46 and 0x47
*/
rc = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R45_IR,
msg, sizeof(msg));
if (rc < 0)
return rc;
/* Infrared toggle (Reg 0x45[7]) */
poll_result->toggle_bit = (msg[0] >> 7);
/* Infrared read count (Reg 0x45[6:0] */
poll_result->read_count = (msg[0] & 0x7f);
/* Remote Control Address (Reg 0x46) */
poll_result->rc_address = msg[1];
/* Remote Control Data (Reg 0x47) */
poll_result->rc_data[0] = msg[2];
return 0;
}
static int em2874_polling_getkey(struct em28xx_IR *ir,
struct em28xx_ir_poll_result *poll_result)
{
struct em28xx *dev = ir->dev;
int rc;
u8 msg[5] = { 0, 0, 0, 0, 0 };
/* Read key toggle, brand, and key code
on registers 0x51-55
*/
rc = dev->em28xx_read_reg_req_len(dev, 0, EM2874_R51_IR,
msg, sizeof(msg));
if (rc < 0)
return rc;
/* Infrared toggle (Reg 0x51[7]) */
poll_result->toggle_bit = (msg[0] >> 7);
/* Infrared read count (Reg 0x51[6:0] */
poll_result->read_count = (msg[0] & 0x7f);
/* Remote Control Address (Reg 0x52) */
poll_result->rc_address = msg[1];
/* Remote Control Data (Reg 0x53-55) */
poll_result->rc_data[0] = msg[2];
poll_result->rc_data[1] = msg[3];
poll_result->rc_data[2] = msg[4];
return 0;
}
/**********************************************************
Polling code for em28xx
**********************************************************/
static void em28xx_ir_handle_key(struct em28xx_IR *ir)
{
int result;
int do_sendkey = 0;
struct em28xx_ir_poll_result poll_result;
/* read the registers containing the IR status */
result = ir->get_key(ir, &poll_result);
if (result < 0) {
dprintk("ir->get_key() failed %d\n", result);
return;
}
dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x%02x\n",
poll_result.toggle_bit, poll_result.read_count,
ir->last_readcount, poll_result.rc_address,
poll_result.rc_data[0]);
if (ir->dev->chip_id == CHIP_ID_EM2874) {
/* The em2874 clears the readcount field every time the
register is read. The em2860/2880 datasheet says that it
is supposed to clear the readcount, but it doesn't. So with
the em2874, we are looking for a non-zero read count as
opposed to a readcount that is incrementing */
ir->last_readcount = 0;
}
if (poll_result.read_count == 0) {
/* The button has not been pressed since the last read */
} else if (ir->last_toggle != poll_result.toggle_bit) {
/* A button has been pressed */
dprintk("button has been pressed\n");
ir->last_toggle = poll_result.toggle_bit;
ir->repeat_interval = 0;
do_sendkey = 1;
} else if (poll_result.toggle_bit == ir->last_toggle &&
poll_result.read_count > 0 &&
poll_result.read_count != ir->last_readcount) {
/* The button is still being held down */
dprintk("button being held down\n");
/* Debouncer for first keypress */
if (ir->repeat_interval++ > 9) {
/* Start repeating after 1 second */
do_sendkey = 1;
}
}
if (do_sendkey) {
dprintk("sending keypress\n");
if (ir->full_code)
ir_input_keydown(ir->input, &ir->ir,
poll_result.rc_address << 8 |
poll_result.rc_data[0]);
else
ir_input_keydown(ir->input, &ir->ir,
poll_result.rc_data[0]);
ir_input_nokey(ir->input, &ir->ir);
}
ir->last_readcount = poll_result.read_count;
return;
}
static void em28xx_ir_work(struct work_struct *work)
{
struct em28xx_IR *ir = container_of(work, struct em28xx_IR, work.work);
em28xx_ir_handle_key(ir);
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
}
static void em28xx_ir_start(struct em28xx_IR *ir)
{
INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
schedule_delayed_work(&ir->work, 0);
}
static void em28xx_ir_stop(struct em28xx_IR *ir)
{
cancel_delayed_work_sync(&ir->work);
}
int em28xx_ir_init(struct em28xx *dev)
{
struct em28xx_IR *ir;
struct input_dev *input_dev;
u8 ir_config;
int err = -ENOMEM;
if (dev->board.ir_codes == NULL) {
/* No remote control support */
return 0;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev)
goto err_out_free;
ir->input = input_dev;
/* Setup the proper handler based on the chip */
switch (dev->chip_id) {
case CHIP_ID_EM2860:
case CHIP_ID_EM2883:
if (dev->model == EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950)
ir->full_code = 1;
ir->get_key = default_polling_getkey;
break;
case CHIP_ID_EM2874:
ir->get_key = em2874_polling_getkey;
/* For now we only support RC5, so enable it */
ir_config = EM2874_IR_RC5;
em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
break;
default:
printk("Unrecognized em28xx chip id: IR not supported\n");
goto err_out_free;
}
/* This is how often we ask the chip for IR information */
ir->polling = 100; /* ms */
/* init input device */
snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
dev->name);
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER,
dev->board.ir_codes);
if (err < 0)
goto err_out_free;
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_USB;
input_dev->id.version = 1;
input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->dev.parent = &dev->udev->dev;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
em28xx_ir_start(ir);
/* all done */
err = input_register_device(ir->input);
if (err)
goto err_out_stop;
return 0;
err_out_stop:
em28xx_ir_stop(ir);
dev->ir = NULL;
err_out_free:
ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
}
int em28xx_ir_fini(struct em28xx *dev)
{
struct em28xx_IR *ir = dev->ir;
/* skip detach on non attached boards */
if (!ir)
return 0;
em28xx_ir_stop(ir);
ir_input_free(ir->input);
input_unregister_device(ir->input);
kfree(ir);
/* done */
dev->ir = NULL;
return 0;
}
/**********************************************************
Handle Webcam snapshot button
**********************************************************/
static void em28xx_query_sbutton(struct work_struct *work)
{
/* Poll the register and see if the button is depressed */
struct em28xx *dev =
container_of(work, struct em28xx, sbutton_query_work.work);
int ret;
ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP);
if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) {
u8 cleared;
/* Button is depressed, clear the register */
cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT;
em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1);
/* Not emulate the keypress */
input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
1);
/* Now unpress the key */
input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
0);
}
/* Schedule next poll */
schedule_delayed_work(&dev->sbutton_query_work,
msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
}
void em28xx_register_snapshot_button(struct em28xx *dev)
{
struct input_dev *input_dev;
int err;
em28xx_info("Registering snapshot button...\n");
input_dev = input_allocate_device();
if (!input_dev) {
em28xx_errdev("input_allocate_device failed\n");
return;
}
usb_make_path(dev->udev, dev->snapshot_button_path,
sizeof(dev->snapshot_button_path));
strlcat(dev->snapshot_button_path, "/sbutton",
sizeof(dev->snapshot_button_path));
INIT_DELAYED_WORK(&dev->sbutton_query_work, em28xx_query_sbutton);
input_dev->name = "em28xx snapshot button";
input_dev->phys = dev->snapshot_button_path;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
set_bit(EM28XX_SNAPSHOT_KEY, input_dev->keybit);
input_dev->keycodesize = 0;
input_dev->keycodemax = 0;
input_dev->id.bustype = BUS_USB;
input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->id.version = 1;
input_dev->dev.parent = &dev->udev->dev;
err = input_register_device(input_dev);
if (err) {
em28xx_errdev("input_register_device failed\n");
input_free_device(input_dev);
return;
}
dev->sbutton_input_dev = input_dev;
schedule_delayed_work(&dev->sbutton_query_work,
msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
return;
}
void em28xx_deregister_snapshot_button(struct em28xx *dev)
{
if (dev->sbutton_input_dev != NULL) {
em28xx_info("Deregistering snapshot button\n");
cancel_rearming_delayed_work(&dev->sbutton_query_work);
input_unregister_device(dev->sbutton_input_dev);
dev->sbutton_input_dev = NULL;
}
return;
}