ide: use I/O ops directly in ide-dma.c
Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(),
ide_dma_start() and __ide_dma_end().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ebddedd..f322964 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -376,7 +376,10 @@
else
dma_stat &= ~(1 << (5 + unit));
- hwif->OUTB(dma_stat, hwif->dma_status);
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(dma_stat, (void __iomem *)hwif->dma_status);
+ else
+ outb(dma_stat, hwif->dma_status);
}
EXPORT_SYMBOL_GPL(ide_dma_host_set);
@@ -449,6 +452,7 @@
ide_hwif_t *hwif = drive->hwif;
struct request *rq = HWGROUP(drive)->rq;
unsigned int reading;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 dma_stat;
if (rq_data_dir(rq))
@@ -470,13 +474,20 @@
outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
/* specify r/w */
- hwif->OUTB(reading, hwif->dma_command);
+ if (mmio)
+ writeb(reading, (void __iomem *)hwif->dma_command);
+ else
+ outb(reading, hwif->dma_command);
/* read DMA status for INTR & ERROR flags */
dma_stat = hwif->read_sff_dma_status(hwif);
/* clear INTR & ERROR flags */
- hwif->OUTB(dma_stat|6, hwif->dma_status);
+ if (mmio)
+ writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+ else
+ outb(dma_stat | 6, hwif->dma_status);
+
drive->waiting_for_dma = 1;
return 0;
}
@@ -492,16 +503,23 @@
void ide_dma_start(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_cmd = hwif->INB(hwif->dma_command);
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_cmd;
/* Note that this is done *after* the cmd has
* been issued to the drive, as per the BM-IDE spec.
* The Promise Ultra33 doesn't work correctly when
* we do this part before issuing the drive cmd.
*/
- /* start DMA */
- hwif->OUTB(dma_cmd|1, hwif->dma_command);
+ if (hwif->host_flags & IDE_HFLAG_MMIO) {
+ dma_cmd = readb((void __iomem *)hwif->dma_command);
+ /* start DMA */
+ writeb(dma_cmd | 1, (void __iomem *)hwif->dma_command);
+ } else {
+ dma_cmd = inb(hwif->dma_command);
+ outb(dma_cmd | 1, hwif->dma_command);
+ }
+
hwif->dma = 1;
wmb();
}
@@ -511,18 +529,31 @@
/* returns 1 on error, 0 otherwise */
int __ide_dma_end (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 dma_stat = 0, dma_cmd = 0;
drive->waiting_for_dma = 0;
- /* get dma_command mode */
- dma_cmd = hwif->INB(hwif->dma_command);
- /* stop DMA */
- hwif->OUTB(dma_cmd&~1, hwif->dma_command);
+
+ if (mmio) {
+ /* get DMA command mode */
+ dma_cmd = readb((void __iomem *)hwif->dma_command);
+ /* stop DMA */
+ writeb(dma_cmd & ~1, (void __iomem *)hwif->dma_command);
+ } else {
+ dma_cmd = inb(hwif->dma_command);
+ outb(dma_cmd & ~1, hwif->dma_command);
+ }
+
/* get DMA status */
dma_stat = hwif->read_sff_dma_status(hwif);
- /* clear the INTR & ERROR bits */
- hwif->OUTB(dma_stat|6, hwif->dma_status);
+
+ if (mmio)
+ /* clear the INTR & ERROR bits */
+ writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+ else
+ outb(dma_stat | 6, hwif->dma_status);
+
/* purge DMA mappings */
ide_destroy_dmatable(drive);
/* verify good DMA status */