blob: beed621a8ae0cb5110e01517e54e968841026a14 [file] [log] [blame]
/*
* This file is part of wl1271
*
* Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __IO_H__
#define __IO_H__
#include "reg.h"
#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
#define HW_PARTITION_REGISTERS_ADDR 0x1FFC0
#define HW_PART0_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR)
#define HW_PART0_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 4)
#define HW_PART1_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 8)
#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12)
#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16)
#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20)
#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
#define HW_ACCESS_REGISTER_SIZE 4
#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
struct wl1271;
void wl1271_disable_interrupts(struct wl1271 *wl);
void wl1271_enable_interrupts(struct wl1271 *wl);
void wl1271_io_reset(struct wl1271 *wl);
void wl1271_io_init(struct wl1271 *wl);
static inline struct device *wl1271_wl_to_dev(struct wl1271 *wl)
{
return wl->if_ops->dev(wl);
}
/* Raw target IO, address is not translated */
static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
wl->if_ops->write(wl, addr, buf, len, fixed);
}
static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
wl->if_ops->read(wl, addr, buf, len, fixed);
}
static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
{
wl1271_raw_read(wl, addr, &wl->buffer_32,
sizeof(wl->buffer_32), false);
return le32_to_cpu(wl->buffer_32);
}
static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
{
wl->buffer_32 = cpu_to_le32(val);
wl1271_raw_write(wl, addr, &wl->buffer_32,
sizeof(wl->buffer_32), false);
}
/* Translated target IO */
static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
{
/*
* To translate, first check to which window of addresses the
* particular address belongs. Then subtract the starting address
* of that window from the address. Then, add offset of the
* translated region.
*
* The translated regions occur next to each other in physical device
* memory, so just add the sizes of the preceding address regions to
* get the offset to the new region.
*
* Currently, only the two first regions are addressed, and the
* assumption is that all addresses will fall into either of those
* two.
*/
if ((addr >= wl->part.reg.start) &&
(addr < wl->part.reg.start + wl->part.reg.size))
return addr - wl->part.reg.start + wl->part.mem.size;
else
return addr - wl->part.mem.start;
}
static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int physical;
physical = wl1271_translate_addr(wl, addr);
wl1271_raw_read(wl, physical, buf, len, fixed);
}
static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int physical;
physical = wl1271_translate_addr(wl, addr);
wl1271_raw_write(wl, physical, buf, len, fixed);
}
static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
{
return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
}
static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
{
wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
}
static inline void wl1271_power_off(struct wl1271 *wl)
{
wl->if_ops->power(wl, false);
clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static inline int wl1271_power_on(struct wl1271 *wl)
{
int ret = wl->if_ops->power(wl, true);
if (ret == 0)
set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
return ret;
}
/* Top Register IO */
void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
int wl1271_set_partition(struct wl1271 *wl,
struct wl1271_partition_set *p);
/* Functions from wl1271_main.c */
int wl1271_register_hw(struct wl1271 *wl);
void wl1271_unregister_hw(struct wl1271 *wl);
int wl1271_init_ieee80211(struct wl1271 *wl);
struct ieee80211_hw *wl1271_alloc_hw(void);
int wl1271_free_hw(struct wl1271 *wl);
irqreturn_t wl1271_irq(int irq, void *data);
bool wl1271_set_block_size(struct wl1271 *wl);
int wl1271_tx_dummy_packet(struct wl1271 *wl);
void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters);
#endif