diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8f49b2b..b22dec4 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -24,8 +24,6 @@
 
 #include "common.h"
 
-#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
index 03dbbdc..8bcc1a5 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -58,21 +58,6 @@
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -278,9 +257,6 @@
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index ef26951..6e838b8 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -173,6 +173,7 @@
 DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,6 +205,7 @@
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 63511de..9fdeea1 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -419,3 +419,22 @@
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe6bf88..fe5420f 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -17,3 +17,4 @@
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index d23ae57..921bc99 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ea8ed10..2829441 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -49,6 +49,7 @@
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -63,7 +64,7 @@
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index bedf5b8..6858a4f 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -65,6 +65,11 @@
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 0497c15..3e7bafa 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -494,11 +494,6 @@
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index def6b67..789b20d 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -135,6 +135,7 @@
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,11 +214,6 @@
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -261,11 +258,13 @@
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 8fc624f..438428e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -179,7 +179,7 @@
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 85184a3..1f44b9c 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -294,7 +294,7 @@
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b705291..cfd605d 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -346,6 +346,8 @@
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 0f7a2f0..18715f1 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -211,11 +211,6 @@
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
 		.virtual = CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
 		.length = CS5_SIZE,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6cbaabe..5be3969 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -322,16 +322,25 @@
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8a0837e..dee9218 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -37,6 +37,8 @@
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
 	select PXA_SSP
 
 config MACH_TAVOREVB
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index bf6785a..9edf645 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -8,13 +8,6 @@
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
-struct platform_mmc_slot {
-	int gpio_cd;
-	int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
 extern int gpio_eth_irq;
 extern int gpio_debug_led1;
 extern int gpio_debug_led2;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index f28c171..fa527b2 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -110,6 +110,12 @@
 	GPIO7_MMC1_CLK,
 	GPIO8_MMC1_CMD,
 	GPIO15_GPIO, /* card detect */
+
+	/* UART3 */
+	GPIO107_UART3_CTS,
+	GPIO108_UART3_RTS,
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index e5eeb3a..c2b938a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -293,7 +293,7 @@
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
 	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
 	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 5b986a8..75f2a37 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -626,8 +627,27 @@
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
 
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-		      unsigned ngpio, void *context)
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+	/* Power supply is always present */
+	info->ac_line_status	= APM_AC_ONLINE;
+	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+	apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+			     unsigned ngpio, void *context)
 {
 	int i;
 	u8 pcb_info = 0;
@@ -726,9 +746,18 @@
 	GPIO99_GPIO,		/* CF RDY */
 };
 
+/*
+ * DM9k MSCx settings:	SRAM, 16 bits
+ *			17 cycles delay first access
+ *			 5 cycles delay next access
+ *			13 cycles recovery time
+ *			faster device
+ */
+#define DM9K_MSC_VALUE		0xe4c9
+
 static void __init zeus_init(void)
 {
-	u16 dm9000_msc = 0xe279;
+	u16 dm9000_msc = DM9K_MSC_VALUE;
 
 	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
@@ -738,6 +767,7 @@
 	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
 
 	pm_power_off = zeus_power_off;
+	zeus_setup_apm();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index b66e9e2..2b4043c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -36,9 +36,6 @@
 #include "devices.h"
 #include "generic.h"
 
-#define MAX_SLOTS	3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
 int gpio_eth_irq;
 int gpio_debug_led1;
 int gpio_debug_led2;
@@ -220,84 +217,28 @@
 #endif
 
 #if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
-			     irq_handler_t zylonite_detect_int,
-			     void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int err, cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	/*
-	 * setup GPIO for Zylonite MMC controller
-	 */
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(gpio_cd);
-
-	err = gpio_request(gpio_wp, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(gpio_wp);
-
-	err = request_irq(cd_irq, zylonite_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_wp);
-err_request_wp:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	free_irq(cd_irq, data);
-	gpio_free(gpio_cd);
-	gpio_free(gpio_wp);
-}
-
 static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= zylonite_mci_init,
-	.exit		= zylonite_mci_exit,
-	.get_ro		= zylonite_mci_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
+	.gpio_card_detect = EXT_GPIO(0),
+	.gpio_card_ro	= EXT_GPIO(2),
 	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(1),
+	.gpio_card_ro	= EXT_GPIO(3),
+	.gpio_power	= -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(30),
+	.gpio_card_ro	= EXT_GPIO(31),
+	.gpio_power	= -1,
 };
 
 static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@
 	pxa_set_mci_info(&zylonite_mci_platform_data);
 	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 }
 #else
 static inline void zylonite_init_mmc(void) {}
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 8409544..3aa73b3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -129,8 +129,8 @@
 	GPIO22_I2C_SDA,
 
 	/* GPIO */
-	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
+	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
-		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
@@ -276,10 +272,6 @@
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
-		/* MMC card detect & write protect for controller 2 */
-		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
-		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 
 	/* GPIOs for Debug LEDs */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 60d08f2..9942bac 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -209,10 +209,6 @@
 		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
 		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
-		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
 	}
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 9406400..ce228bd 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -15,7 +15,15 @@
  *
  */
 
+#include <linux/io.h>
 #include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define	WTCR	(TMR_BA + 0x1C)
+#define	WTCLK	(1 << 10)
+#define	WTE	(1 << 7)
+#define	WTRE	(1 << 1)
 
 static void arch_idle(void)
 {
@@ -23,6 +31,11 @@
 
 static void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		__raw_writel(WTE | WTRE | WTCLK, WTCR);
+	}
 }
 
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4128af8..b80f769 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -42,7 +42,10 @@
 #define TICKS_PER_SEC	100
 #define PRESCALE	0x63 /* Divider = prescale + 1 */
 
-unsigned int timer0_load;
+#define	TDR_SHIFT	24
+#define	TDR_MASK	((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
 
 static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
@@ -88,7 +91,7 @@
 static struct clock_event_device nuc900_clockevent_device = {
 	.name		= "nuc900-timer0",
 	.shift		= 32,
-	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= nuc900_clockevent_setmode,
 	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
@@ -112,8 +115,23 @@
 	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
 {
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer0");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR0);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	__raw_writel(RESETINT, REG_TISR);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
 	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
 					nuc900_clockevent_device.shift);
 	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
@@ -127,26 +145,35 @@
 
 static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
-	return ~__raw_readl(REG_TDR1);
+	return (~__raw_readl(REG_TDR1)) & TDR_MASK;
 }
 
 static struct clocksource clocksource_nuc900 = {
 	.name	= "nuc900-timer1",
 	.rating	= 200,
 	.read	= nuc900_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(TDR_SHIFT),
+	.shift	= 10,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
 {
 	unsigned int val;
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer1");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR1);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
 
 	__raw_writel(0xffffffff, REG_TICR1);
 
 	val = __raw_readl(REG_TCSR1);
-	val |= (COUNTEN | PERIOD);
+	val |= (COUNTEN | PERIOD | PRESCALE);
 	__raw_writel(val, REG_TCSR1);
 
 	clocksource_nuc900.mult =
@@ -156,25 +183,8 @@
 
 static void __init nuc900_timer_init(void)
 {
-	struct clk *ck_ext = clk_get(NULL, "ext");
-	unsigned int	rate;
-
-	BUG_ON(IS_ERR(ck_ext));
-
-	rate = clk_get_rate(ck_ext);
-	clk_put(ck_ext);
-	rate = rate / (PRESCALE + 0x01);
-
-	 /* set a known state */
-	__raw_writel(0x00, REG_TCSR0);
-	__raw_writel(0x00, REG_TCSR1);
-	__raw_writel(RESETINT, REG_TISR);
-	timer0_load = (rate / TICKS_PER_SEC);
-
-	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
-	nuc900_clocksource_init(rate);
-	nuc900_clockevents_init(rate);
+	nuc900_clocksource_init();
+	nuc900_clockevents_init();
 }
 
 struct sys_timer nuc900_timer = {
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index a26a605..0cb1848 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -40,7 +40,6 @@
 	asid	r3, r3				@ mask ASID
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
-	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
 #ifdef CONFIG_SMP
 	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 810c47f..9af494f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -58,19 +58,19 @@
 
 #define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
 #define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
 
 #define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
 #define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
 #define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
 #define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
 #define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
 
@@ -418,23 +418,23 @@
 #define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 91e7381..854e2dc 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,4 +41,8 @@
 #define UART1_BASE_ADDR			0x43f90000
 #define UART2_BASE_ADDR			0x43f94000
 
+#define MX25_FEC_BASE_ADDR		0x50038000
+
+#define MX25_INT_FEC	57
+
 #endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index a9eabdc..51dc5c8 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -204,14 +204,14 @@
 		goto err_free_clk;
 	}
 
-	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "failed to request memory resource\n");
 		ret = -EBUSY;
 		goto err_free_clk;
 	}
 
-	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	pwm->mmio_base = ioremap(r->start, resource_size(r));
 	if (pwm->mmio_base == NULL) {
 		dev_err(&pdev->dev, "failed to ioremap() registers\n");
 		ret = -ENODEV;
@@ -241,7 +241,7 @@
 	return 0;
 
 err_free_mem:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 err_free_clk:
 	clk_put(pwm->clk);
 err_free:
@@ -271,7 +271,7 @@
 	iounmap(pwm->mmio_base);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 
 	clk_put(pwm->clk);
 	kfree(pwm);
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index c37ee9e..39e1c0d 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -68,6 +68,7 @@
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900
 	select PHYLIB
+	select MII
 	help
 	  Say Y here if you want to use built-in Ethernet ports
 	  on w90p910 processor.
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 26ffdcd..15a00e8 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1440,6 +1440,10 @@
 static int is_cxgb3_dev(struct net_device *dev)
 {
 	struct cxgb3i_sdev_data *cdata;
+	struct net_device *ndev = dev;
+
+	if (dev->priv_flags & IFF_802_1Q_VLAN)
+		ndev = vlan_dev_real_dev(dev);
 
 	write_lock(&cdata_rwlock);
 	list_for_each_entry(cdata, &cdata_list, list) {
@@ -1447,7 +1451,7 @@
 		int i;
 
 		for (i = 0; i < ports->nports; i++)
-			if (dev == ports->lldevs[i]) {
+			if (ndev == ports->lldevs[i]) {
 				write_unlock(&cdata_rwlock);
 				return 1;
 			}
@@ -1566,6 +1570,26 @@
 	return -EINVAL;
 }
 
+/**
+ * cxgb3i_find_dev - find the interface associated with the given address
+ * @ipaddr: ip address
+ */
+static struct net_device *
+cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr)
+{
+	struct flowi fl;
+	int err;
+	struct rtable *rt;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.nl_u.ip4_u.daddr = ipaddr;
+
+	err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl);
+	if (!err)
+		return (&rt->u.dst)->dev;
+
+	return NULL;
+}
 
 /**
  * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address
@@ -1581,6 +1605,7 @@
 	struct cxgb3i_sdev_data *cdata;
 	struct t3cdev *cdev;
 	__be32 sipv4;
+	struct net_device *dstdev;
 	int err;
 
 	c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
@@ -1591,6 +1616,13 @@
 	c3cn->daddr.sin_port = usin->sin_port;
 	c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
 
+	dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr);
+	if (!dstdev || !is_cxgb3_dev(dstdev))
+		return -ENETUNREACH;
+
+	if (dstdev->priv_flags & IFF_802_1Q_VLAN)
+		dev = dstdev;
+
 	rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
 			c3cn->daddr.sin_addr.s_addr,
 			c3cn->saddr.sin_port,
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ce52270..2cc3968 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4142,8 +4142,8 @@
 	spin_lock_irq(shost->host_lock);
 	if (vport->fc_rscn_flush) {
 		/* Another thread is walking fc_rscn_id_list on this vport */
-		spin_unlock_irq(shost->host_lock);
 		vport->fc_flag |= FC_RSCN_DISCOVERY;
+		spin_unlock_irq(shost->host_lock);
 		/* Send back ACC */
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
 		return 0;
@@ -5948,8 +5948,8 @@
 				lpfc_initial_fdisc(vport);
 			break;
 		}
-
 	} else {
+		vport->vpi_state |= LPFC_VPI_REGISTERED;
 		if (vport == phba->pport)
 			if (phba->sli_rev < LPFC_SLI_REV4)
 				lpfc_issue_fabric_reglogin(vport);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 3b94244..2445e39 100755
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -747,6 +747,10 @@
 
 	if (phba->link_state == LPFC_LINK_DOWN)
 		return 0;
+
+	/* Block all SCSI stack I/Os */
+	lpfc_scsi_dev_block(phba);
+
 	spin_lock_irq(&phba->hbalock);
 	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
 	if (phba->link_state > LPFC_LINK_DOWN) {
@@ -1555,10 +1559,16 @@
 	 * to book keeping the FCFIs can be used.
 	 */
 	if (shdr_status || shdr_add_status) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"2521 READ_FCF_RECORD mailbox failed "
-				"with status x%x add_status x%x, mbx\n",
-				shdr_status, shdr_add_status);
+		if (shdr_status == STATUS_FCF_TABLE_EMPTY) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2726 READ_FCF_RECORD Indicates empty "
+					"FCF table.\n");
+		} else {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2521 READ_FCF_RECORD mailbox failed "
+					"with status x%x add_status x%x, mbx\n",
+					shdr_status, shdr_add_status);
+		}
 		goto out;
 	}
 	/* Interpreting the returned information of FCF records */
@@ -1698,7 +1708,9 @@
 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 		return;
 	}
+	spin_lock_irq(&phba->hbalock);
 	vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
+	spin_unlock_irq(&phba->hbalock);
 
 	if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
 		lpfc_initial_fdisc(vport);
@@ -2259,7 +2271,10 @@
 				 mb->mbxStatus);
 		break;
 	}
+	spin_lock_irq(&phba->hbalock);
 	vport->vpi_state &= ~LPFC_VPI_REGISTERED;
+	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+	spin_unlock_irq(&phba->hbalock);
 	vport->unreg_vpi_cmpl = VPORT_OK;
 	mempool_free(pmb, phba->mbox_mem_pool);
 	/*
@@ -4475,8 +4490,10 @@
 		(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 			lpfc_mbx_unreg_vpi(vports[i]);
+			spin_lock_irq(&phba->hbalock);
 			vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
 			vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+			spin_unlock_irq(&phba->hbalock);
 		}
 	lpfc_destroy_vport_work_array(phba, vports);
 
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
old mode 100644
new mode 100755
index 1585148..8a2a1c5
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1013,7 +1013,7 @@
 };
 
 #define LPFC_HDR_BUF_SIZE 128
-#define LPFC_DATA_BUF_SIZE 4096
+#define LPFC_DATA_BUF_SIZE 2048
 struct rq_context {
 	uint32_t word0;
 #define lpfc_rq_context_rq_size_SHIFT	16
@@ -1371,6 +1371,7 @@
 #define STATUS_ERROR_ACITMAIN				0x2a
 #define STATUS_REBOOT_REQUIRED				0x2c
 #define STATUS_FCF_IN_USE				0x3a
+#define STATUS_FCF_TABLE_EMPTY				0x43
 
 struct lpfc_mbx_sli4_config {
 	struct mbox_header header;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d4da6bd..b8eb1b6 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3006,6 +3006,7 @@
 	struct lpfc_vport *vport;
 	struct lpfc_nodelist *ndlp;
 	struct Scsi_Host  *shost;
+	uint32_t link_state;
 
 	phba->fc_eventTag = acqe_fcoe->event_tag;
 	phba->fcoe_eventtag = acqe_fcoe->event_tag;
@@ -3052,9 +3053,12 @@
 			break;
 		/*
 		 * Currently, driver support only one FCF - so treat this as
-		 * a link down.
+		 * a link down, but save the link state because we don't want
+		 * it to be changed to Link Down unless it is already down.
 		 */
+		link_state = phba->link_state;
 		lpfc_linkdown(phba);
+		phba->link_state = link_state;
 		/* Unregister FCF if no devices connected to it */
 		lpfc_unregister_unused_fcf(phba);
 		break;
@@ -7226,8 +7230,6 @@
 {
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"2711 PCI channel permanent disable for failure\n");
-	/* Block all SCSI devices' I/Os on the host */
-	lpfc_scsi_dev_block(phba);
 	/* Clean up all driver's outstanding SCSI I/Os */
 	lpfc_sli_flush_fcp_rings(phba);
 }
@@ -7256,6 +7258,9 @@
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
+	/* Block all SCSI devices' I/Os on the host */
+	lpfc_scsi_dev_block(phba);
+
 	switch (state) {
 	case pci_channel_io_normal:
 		/* Non-fatal error, prepare for recovery */
@@ -7507,6 +7512,9 @@
 			error = -ENODEV;
 			goto out_free_sysfs_attr;
 		}
+		/* Default to single FCP EQ for non-MSI-X */
+		if (phba->intr_type != MSIX)
+			phba->cfg_fcp_eq_count = 1;
 		/* Set up SLI-4 HBA */
 		if (lpfc_sli4_hba_setup(phba)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 7935667..589549b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1383,7 +1383,7 @@
 /* HBQ for ELS and CT traffic. */
 static struct lpfc_hbq_init lpfc_els_hbq = {
 	.rn = 1,
-	.entry_count = 200,
+	.entry_count = 256,
 	.mask_count = 0,
 	.profile = 0,
 	.ring_mask = (1 << LPFC_ELS_RING),
@@ -1482,8 +1482,11 @@
 int
 lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
 {
-	return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
-					 lpfc_hbq_defs[qno]->add_count));
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		return 0;
+	else
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					 lpfc_hbq_defs[qno]->add_count);
 }
 
 /**
@@ -1498,8 +1501,12 @@
 static int
 lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
 {
-	return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
-					 lpfc_hbq_defs[qno]->init_count));
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					 lpfc_hbq_defs[qno]->entry_count);
+	else
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					 lpfc_hbq_defs[qno]->init_count);
 }
 
 /**
@@ -4110,6 +4117,7 @@
 	if (rc) {
 		dma_free_coherent(&phba->pcidev->dev, dma_size,
 				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
 		return -EIO;
 	}
 
@@ -5848,7 +5856,6 @@
 					iocbq->iocb.un.ulpWord[3]);
 		wqe->generic.word3 = 0;
 		bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
-		bf_set(wqe_xc, &wqe->generic, 1);
 		/* The entire sequence is transmitted for this IOCB */
 		xmit_len = total_len;
 		cmnd = CMD_XMIT_SEQUENCE64_CR;
@@ -10944,7 +10951,8 @@
 		return dmabuf;
 	}
 	temp_hdr = seq_dmabuf->hbuf.virt;
-	if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+	if (be16_to_cpu(new_hdr->fh_seq_cnt) <
+		be16_to_cpu(temp_hdr->fh_seq_cnt)) {
 		list_del_init(&seq_dmabuf->hbuf.list);
 		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
 		list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
@@ -10955,6 +10963,11 @@
 	list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
 	seq_dmabuf->time_stamp = jiffies;
 	lpfc_update_rcv_time_stamp(vport);
+	if (list_empty(&seq_dmabuf->dbuf.list)) {
+		temp_hdr = dmabuf->hbuf.virt;
+		list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+		return seq_dmabuf;
+	}
 	/* find the correct place in the sequence to insert this frame */
 	list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
 		temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
@@ -10963,7 +10976,8 @@
 		 * If the frame's sequence count is greater than the frame on
 		 * the list then insert the frame right after this frame
 		 */
-		if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+		if (be16_to_cpu(new_hdr->fh_seq_cnt) >
+			be16_to_cpu(temp_hdr->fh_seq_cnt)) {
 			list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
 			return seq_dmabuf;
 		}
@@ -11210,7 +11224,7 @@
 		seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
 		hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
 		/* If there is a hole in the sequence count then fail. */
-		if (++seq_count != hdr->fh_seq_cnt)
+		if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt))
 			return 0;
 		fctl = (hdr->fh_f_ctl[0] << 16 |
 			hdr->fh_f_ctl[1] << 8 |
@@ -11242,6 +11256,7 @@
 	struct lpfc_iocbq *first_iocbq, *iocbq;
 	struct fc_frame_header *fc_hdr;
 	uint32_t sid;
+	struct ulp_bde64 *pbde;
 
 	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
 	/* remove from receive buffer list */
@@ -11283,8 +11298,9 @@
 		if (!iocbq->context3) {
 			iocbq->context3 = d_buf;
 			iocbq->iocb.ulpBdeCount++;
-			iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
-							LPFC_DATA_BUF_SIZE;
+			pbde = (struct ulp_bde64 *)
+					&iocbq->iocb.unsli3.sli3Words[4];
+			pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE;
 			first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
 				bf_get(lpfc_rcqe_length,
 				       &seq_dmabuf->cq_event.cqe.rcqe_cmpl);
@@ -11401,15 +11417,9 @@
 		return;
 	}
 	/* If not last frame in sequence continue processing frames. */
-	if (!lpfc_seq_complete(seq_dmabuf)) {
-		/*
-		 * When saving off frames post a new one and mark this
-		 * frame to be freed when it is finished.
-		 **/
-		lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
-		dmabuf->tag = -1;
+	if (!lpfc_seq_complete(seq_dmabuf))
 		return;
-	}
+
 	/* Send the complete sequence to the upper layer protocol */
 	lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
 }
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 25d66d0..44e5f57 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -28,7 +28,7 @@
 /* Multi-queue arrangement for fast-path FCP work queues */
 #define LPFC_FN_EQN_MAX       8
 #define LPFC_SP_EQN_DEF       1
-#define LPFC_FP_EQN_DEF       1
+#define LPFC_FP_EQN_DEF       4
 #define LPFC_FP_EQN_MIN       1
 #define LPFC_FP_EQN_MAX       (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
 
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c7f3aed..792f722 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.6"
+#define LPFC_DRIVER_VERSION "8.3.7"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 7d6dd83..e3c7fa6 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -512,8 +512,10 @@
 		return VPORT_OK;
 	}
 
+	spin_lock_irq(&phba->hbalock);
 	vport->load_flag |= FC_LOADING;
 	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+	spin_unlock_irq(&phba->hbalock);
 
 	/* Use the Physical nodes Fabric NDLP to determine if the link is
 	 * up and ready to FDISC.
@@ -700,7 +702,7 @@
 			}
 			spin_unlock_irq(&phba->ndlp_lock);
 		}
-		if (vport->vpi_state != LPFC_VPI_REGISTERED)
+		if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
 			goto skip_logo;
 		vport->unreg_vpi_cmpl = VPORT_INVAL;
 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index e7d2688..b6f1ef9 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -2483,14 +2483,12 @@
 			sense_copied = 1;
 		}
 
-		if (RES_IS_GSCSI(res->cfg_entry)) {
+		if (RES_IS_GSCSI(res->cfg_entry))
 			pmcraid_cancel_all(cmd, sense_copied);
-		} else if (sense_copied) {
+		else if (sense_copied)
 			pmcraid_erp_done(cmd);
-			return 0;
-		} else  {
+		else
 			pmcraid_request_sense(cmd);
-		}
 
 		return 1;
 
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 21e2bc4..3a9f5b2 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -232,6 +232,9 @@
 	if (off)
 		return 0;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return 0;
+
 	if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
 		return -EINVAL;
 	if (start > ha->optrom_size)
@@ -379,6 +382,9 @@
 	    struct device, kobj)));
 	struct qla_hw_data *ha = vha->hw;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return 0;
+
 	if (!capable(CAP_SYS_ADMIN))
 		return 0;
 
@@ -398,6 +404,9 @@
 	struct qla_hw_data *ha = vha->hw;
 	uint8_t *tmp_data;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return 0;
+
 	if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size ||
 	    !ha->isp_ops->write_nvram)
 		return 0;
@@ -1238,10 +1247,11 @@
     char *buf)
 {
 	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
-	int rval;
+	int rval = QLA_FUNCTION_FAILED;
 	uint16_t state[5];
 
-	rval = qla2x00_get_firmware_state(vha, state);
+	if (!vha->hw->flags.eeh_busy)
+		rval = qla2x00_get_firmware_state(vha, state);
 	if (rval != QLA_SUCCESS)
 		memset(state, -1, sizeof(state));
 
@@ -1452,10 +1462,13 @@
 	if (!fcport)
 		return;
 
-	if (unlikely(pci_channel_offline(fcport->vha->hw->pdev)))
+	if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+		return;
+
+	if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
 		qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
-	else
-		qla2x00_abort_fcport_cmds(fcport);
+		return;
+	}
 
 	/*
 	 * Transport has effectively 'deleted' the rport, clear
@@ -1475,6 +1488,9 @@
 	if (!fcport)
 		return;
 
+	if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+		return;
+
 	if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
 		qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
 		return;
@@ -1515,6 +1531,12 @@
 	pfc_host_stat = &ha->fc_host_stat;
 	memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
 
+	if (test_bit(UNLOADING, &vha->dpc_flags))
+		goto done;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		goto done;
+
 	stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
 	if (stats == NULL) {
 		DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index f660dd7..d6d9c86 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -26,7 +26,7 @@
 /* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */
 /* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */
 /* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */
-/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */
+/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
 
 /*
 * Macros use for debugging the driver.
@@ -132,6 +132,13 @@
 #else
 #define DEBUG16(x)	do {} while (0)
 #endif
+
+#if defined(QL_DEBUG_LEVEL_17)
+#define DEBUG17(x)	do {x;} while (0)
+#else
+#define DEBUG17(x)	do {} while (0)
+#endif
+
 /*
  * Firmware Dump structure definition
  */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 384afda..608e675 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2256,11 +2256,13 @@
 		uint32_t	disable_serdes		:1;
 		uint32_t	gpsc_supported		:1;
 		uint32_t	npiv_supported		:1;
+		uint32_t	pci_channel_io_perm_failure	:1;
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
 		uint32_t	chip_reset_done		:1;
 		uint32_t	port0			:1;
 		uint32_t	running_gold_fw		:1;
+		uint32_t	eeh_busy		:1;
 		uint32_t	cpu_affinity_enabled	:1;
 		uint32_t	disable_msix_handshake	:1;
 	} flags;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 0b6801f..f61fb8d 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -324,6 +324,7 @@
 extern int
 qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
 
+extern int qla2x00_get_data_rate(scsi_qla_host_t *);
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 73a7935..b4a0eac 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -269,6 +269,8 @@
 	vha->flags.online = 0;
 	ha->flags.chip_reset_done = 0;
 	vha->flags.reset_active = 0;
+	ha->flags.pci_channel_io_perm_failure = 0;
+	ha->flags.eeh_busy = 0;
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	atomic_set(&vha->loop_state, LOOP_DOWN);
 	vha->device_flags = DFLG_NO_CABLE;
@@ -581,6 +583,9 @@
 	uint32_t	cnt;
 	uint16_t	cmd;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return;
+
 	ha->isp_ops->disable_intrs(ha);
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -786,6 +791,12 @@
 qla24xx_reset_chip(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
+
+	if (pci_channel_offline(ha->pdev) &&
+	    ha->flags.pci_channel_io_perm_failure) {
+		return;
+	}
+
 	ha->isp_ops->disable_intrs(ha);
 
 	/* Perform RISC reset. */
@@ -2266,6 +2277,8 @@
 	clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
 	clear_bit(RSCN_UPDATE, &vha->dpc_flags);
 
+	qla2x00_get_data_rate(vha);
+
 	/* Determine what we need to do */
 	if (ha->current_topology == ISP_CFG_FL &&
 	    (test_bit(LOCAL_LOOP_UPDATE, &flags))) {
@@ -3560,6 +3573,13 @@
 		/* Requeue all commands in outstanding command list. */
 		qla2x00_abort_all_cmds(vha, DID_RESET << 16);
 
+		if (unlikely(pci_channel_offline(ha->pdev) &&
+		    ha->flags.pci_channel_io_perm_failure)) {
+			clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+			status = 0;
+			return status;
+		}
+
 		ha->isp_ops->get_flash_version(vha, req->ring);
 
 		ha->isp_ops->nvram_config(vha);
@@ -4458,6 +4478,8 @@
 	int ret, retries;
 	struct qla_hw_data *ha = vha->hw;
 
+	if (ha->flags.pci_channel_io_perm_failure)
+		return;
 	if (!IS_FWI2_CAPABLE(ha))
 		return;
 	if (!ha->fw_major_version)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1692a88..ffd0efd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -152,7 +152,7 @@
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
 		if (stat & HSR_RISC_PAUSED) {
-			if (pci_channel_offline(ha->pdev))
+			if (unlikely(pci_channel_offline(ha->pdev)))
 				break;
 
 			hccr = RD_REG_WORD(&reg->hccr);
@@ -1846,12 +1846,15 @@
 	reg = &ha->iobase->isp24;
 	status = 0;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return IRQ_HANDLED;
+
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	vha = pci_get_drvdata(ha->pdev);
 	for (iter = 50; iter--; ) {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
-			if (pci_channel_offline(ha->pdev))
+			if (unlikely(pci_channel_offline(ha->pdev)))
 				break;
 
 			hccr = RD_REG_DWORD(&reg->hccr);
@@ -1992,7 +1995,7 @@
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
 		if (stat & HSRX_RISC_PAUSED) {
-			if (pci_channel_offline(ha->pdev))
+			if (unlikely(pci_channel_offline(ha->pdev)))
 				break;
 
 			hccr = RD_REG_DWORD(&reg->hccr);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 05d595d..056e4d4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -56,6 +56,12 @@
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no));
 
+	if (ha->flags.pci_channel_io_perm_failure) {
+		DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
+			     "Exiting.\n", __func__, vha->host_no));
+		return QLA_FUNCTION_TIMEOUT;
+	}
+
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -154,10 +160,14 @@
 			/* Check for pending interrupts. */
 			qla2x00_poll(ha->rsp_q_map[0]);
 
-			if (command != MBC_LOAD_RISC_RAM_EXTENDED &&
-			    !ha->flags.mbox_int)
+			if (!ha->flags.mbox_int &&
+			    !(IS_QLA2200(ha) &&
+			    command == MBC_LOAD_RISC_RAM_EXTENDED))
 				msleep(10);
 		} /* while */
+		DEBUG17(qla_printk(KERN_WARNING, ha,
+			"Waited %d sec\n",
+			(uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)));
 	}
 
 	/* Check whether we timed out */
@@ -227,7 +237,8 @@
 
 	if (rval == QLA_FUNCTION_TIMEOUT &&
 	    mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
-		if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
+		if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
+		    ha->flags.eeh_busy) {
 			/* not in dpc. schedule it for dpc to take over. */
 			DEBUG(printk("%s(%ld): timeout schedule "
 			"isp_abort_needed.\n", __func__,
@@ -237,7 +248,7 @@
 			base_vha->host_no));
 			qla_printk(KERN_WARNING, ha,
 			    "Mailbox command timeout occurred. Scheduling ISP "
-			    "abort.\n");
+			    "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy);
 			set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else if (!abort_active) {
@@ -2530,6 +2541,9 @@
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2565,6 +2579,9 @@
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2595,6 +2612,9 @@
 	if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2639,6 +2659,9 @@
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -3643,3 +3666,36 @@
 
 	return rval;
 }
+
+int
+qla2x00_get_data_rate(scsi_qla_host_t *vha)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_DATA_RATE;
+	mcp->mb[1] = 0;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n",
+		    __func__, vha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk(KERN_INFO
+		    "%s(%ld): done.\n", __func__, vha->host_no));
+		if (mcp->mb[1] != 0x7)
+			ha->link_data_rate = mcp->mb[1];
+	}
+
+	return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2a4c7f4..b901aa2 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -639,8 +639,10 @@
 	struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
 	struct scsi_qla_host *vha;
 
+	spin_lock_irq(&rsp->hw->hardware_lock);
 	vha = qla25xx_get_host(rsp);
 	qla24xx_process_response_queue(vha, rsp);
+	spin_unlock_irq(&rsp->hw->hardware_lock);
 }
 
 /* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2f873d2..209f50e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -475,11 +475,11 @@
 	srb_t *sp;
 	int rval;
 
-	if (unlikely(pci_channel_offline(ha->pdev))) {
-		if (ha->pdev->error_state == pci_channel_io_frozen)
-			cmd->result = DID_REQUEUE << 16;
-		else
+	if (ha->flags.eeh_busy) {
+		if (ha->flags.pci_channel_io_perm_failure)
 			cmd->result = DID_NO_CONNECT << 16;
+		else
+			cmd->result = DID_REQUEUE << 16;
 		goto qc24_fail_command;
 	}
 
@@ -552,8 +552,15 @@
 #define ABORT_POLLING_PERIOD	1000
 #define ABORT_WAIT_ITER		((10 * 1000) / (ABORT_POLLING_PERIOD))
 	unsigned long wait_iter = ABORT_WAIT_ITER;
+	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	struct qla_hw_data *ha = vha->hw;
 	int ret = QLA_SUCCESS;
 
+	if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+		DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+		return ret;
+	}
+
 	while (CMD_SP(cmd) && wait_iter--) {
 		msleep(ABORT_POLLING_PERIOD);
 	}
@@ -1810,6 +1817,13 @@
 
 	/* Set ISP-type information. */
 	qla2x00_set_isp_flags(ha);
+
+	/* Set EEH reset type to fundamental if required by hba */
+	if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+		pdev->needs_freset = 1;
+		pci_save_state(pdev);
+	}
+
 	/* Configure PCI I/O space */
 	ret = qla2x00_iospace_config(ha);
 	if (ret)
@@ -2174,6 +2188,24 @@
 {
 	struct qla_hw_data *ha = vha->hw;
 
+	qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+	/* Disable timer */
+	if (vha->timer_active)
+		qla2x00_stop_timer(vha);
+
+	/* Kill the kernel thread for this host */
+	if (ha->dpc_thread) {
+		struct task_struct *t = ha->dpc_thread;
+
+		/*
+		 * qla2xxx_wake_dpc checks for ->dpc_thread
+		 * so we need to zero it out.
+		 */
+		ha->dpc_thread = NULL;
+		kthread_stop(t);
+	}
+
 	qla25xx_delete_queues(vha);
 
 	if (ha->flags.fce_enabled)
@@ -2185,6 +2217,8 @@
 	/* Stop currently executing firmware. */
 	qla2x00_try_to_stop_firmware(vha);
 
+	vha->flags.online = 0;
+
 	/* turn-off interrupts on the card */
 	if (ha->interrupts_on)
 		ha->isp_ops->disable_intrs(ha);
@@ -2859,6 +2893,13 @@
 		if (!base_vha->flags.init_done)
 			continue;
 
+		if (ha->flags.eeh_busy) {
+			DEBUG17(qla_printk(KERN_WARNING, ha,
+			    "qla2x00_do_dpc: dpc_flags: %lx\n",
+			    base_vha->dpc_flags));
+			continue;
+		}
+
 		DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
 
 		ha->dpc_active = 1;
@@ -3049,8 +3090,13 @@
 	int		index;
 	srb_t		*sp;
 	int		t;
+	uint16_t        w;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req;
+
+	/* Hardware read to raise pending EEH errors during mailbox waits. */
+	if (!pci_channel_offline(ha->pdev))
+		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 	/*
 	 * Ports - Port down timer.
 	 *
@@ -3252,16 +3298,23 @@
 static pci_ers_result_t
 qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 {
-	scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+	scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+	struct qla_hw_data *ha = vha->hw;
+
+	DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+	    state));
 
 	switch (state) {
 	case pci_channel_io_normal:
+		ha->flags.eeh_busy = 0;
 		return PCI_ERS_RESULT_CAN_RECOVER;
 	case pci_channel_io_frozen:
+		ha->flags.eeh_busy = 1;
 		pci_disable_device(pdev);
 		return PCI_ERS_RESULT_NEED_RESET;
 	case pci_channel_io_perm_failure:
-		qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+		ha->flags.pci_channel_io_perm_failure = 1;
+		qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -3312,6 +3365,8 @@
 	struct qla_hw_data *ha = base_vha->hw;
 	int rc;
 
+	DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
 	if (ha->mem_only)
 		rc = pci_enable_device_mem(pdev);
 	else
@@ -3320,19 +3375,33 @@
 	if (rc) {
 		qla_printk(KERN_WARNING, ha,
 		    "Can't re-enable PCI device after reset.\n");
-
 		return ret;
 	}
-	pci_set_master(pdev);
 
 	if (ha->isp_ops->pci_config(base_vha))
 		return ret;
 
+#ifdef QL_DEBUG_LEVEL_17
+	{
+		uint8_t b;
+		uint32_t i;
+
+		printk("slot_reset_1: ");
+		for (i = 0; i < 256; i++) {
+			pci_read_config_byte(ha->pdev, i, &b);
+			printk("%s%02x", (i%16) ? " " : "\n", b);
+		}
+		printk("\n");
+	}
+#endif
 	set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 	if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
 		ret =  PCI_ERS_RESULT_RECOVERED;
 	clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
 
+	DEBUG17(qla_printk(KERN_WARNING, ha,
+	    "slot_reset-return:ret=%x\n", ret));
+
 	return ret;
 }
 
@@ -3343,12 +3412,17 @@
 	struct qla_hw_data *ha = base_vha->hw;
 	int ret;
 
+	DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
 	ret = qla2x00_wait_for_hba_online(base_vha);
 	if (ret != QLA_SUCCESS) {
 		qla_printk(KERN_ERR, ha,
 		    "the device failed to resume I/O "
 		    "from slot/link_reset");
 	}
+
+	ha->flags.eeh_busy = 0;
+
 	pci_cleanup_aer_uncorrect_error_status(pdev);
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index c482220..a65dd95 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k8"
+#define QLA2XXX_VERSION      "8.03.01-k9"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 3058bb1..fd7b15b 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -623,6 +623,11 @@
 		}
 		break;
 	case INQUIRY:
+		if (lun >= host->max_lun) {
+			cmd->result = DID_NO_CONNECT << 16;
+			done(cmd);
+			return 0;
+		}
 		if (id != host->max_id - 1)
 			break;
 		if (!lun && !cmd->device->channel &&
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 415858b..825b665 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1221,9 +1221,9 @@
 static int pxafb_smart_thread(void *arg)
 {
 	struct pxafb_info *fbi = arg;
-	struct pxafb_mach_info *inf;
+	struct pxafb_mach_info *inf = fbi->dev->platform_data;
 
-	if (!fbi || !fbi->dev->platform_data->smart_update) {
+	if (!inf->smart_update) {
 		pr_err("%s: not properly initialized, thread terminated\n",
 				__func__);
 		return -EINVAL;
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 698a863..2afbceb 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -738,13 +738,28 @@
 					fsdata);
 }
 
+static int exofs_write_end(struct file *file, struct address_space *mapping,
+			loff_t pos, unsigned len, unsigned copied,
+			struct page *page, void *fsdata)
+{
+	struct inode *inode = mapping->host;
+	/* According to comment in simple_write_end i_mutex is held */
+	loff_t i_size = inode->i_size;
+	int ret;
+
+	ret = simple_write_end(file, mapping,pos, len, copied, page, fsdata);
+	if (i_size != inode->i_size)
+		mark_inode_dirty(inode);
+	return ret;
+}
+
 const struct address_space_operations exofs_aops = {
 	.readpage	= exofs_readpage,
 	.readpages	= exofs_readpages,
 	.writepage	= exofs_writepage,
 	.writepages	= exofs_writepages,
 	.write_begin	= exofs_write_begin_export,
-	.write_end	= simple_write_end,
+	.write_end	= exofs_write_end,
 };
 
 /******************************************************************************
diff --git a/fs/exofs/pnfs.h b/fs/exofs/pnfs.h
index 423033a..c52e988 100644
--- a/fs/exofs/pnfs.h
+++ b/fs/exofs/pnfs.h
@@ -15,13 +15,7 @@
 #ifndef __EXOFS_PNFS_H__
 #define __EXOFS_PNFS_H__
 
-#if defined(CONFIG_PNFS)
-
-
-/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */
-#include "../nfs/objlayout/pnfs_osd_xdr.h"
-
-#else /* defined(CONFIG_PNFS) */
+#if ! defined(__PNFS_OSD_XDR_H__)
 
 enum pnfs_iomode {
 	IOMODE_READ = 1,
@@ -46,6 +40,6 @@
 	u32	odm_raid_algorithm;
 };
 
-#endif /* else defined(CONFIG_PNFS) */
+#endif /* ! defined(__PNFS_OSD_XDR_H__) */
 
 #endif /* __EXOFS_PNFS_H__ */
diff --git a/kernel/module.c b/kernel/module.c
index e96b8ed..f82386b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1010,6 +1010,12 @@
  * J. Corbet <corbet@lwn.net>
  */
 #if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+
+static inline bool sect_empty(const Elf_Shdr *sect)
+{
+	return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0;
+}
+
 struct module_sect_attr
 {
 	struct module_attribute mattr;
@@ -1051,8 +1057,7 @@
 
 	/* Count loaded sections and allocate structures */
 	for (i = 0; i < nsect; i++)
-		if (sechdrs[i].sh_flags & SHF_ALLOC
-		    && sechdrs[i].sh_size)
+		if (!sect_empty(&sechdrs[i]))
 			nloaded++;
 	size[0] = ALIGN(sizeof(*sect_attrs)
 			+ nloaded * sizeof(sect_attrs->attrs[0]),
@@ -1070,9 +1075,7 @@
 	sattr = &sect_attrs->attrs[0];
 	gattr = &sect_attrs->grp.attrs[0];
 	for (i = 0; i < nsect; i++) {
-		if (! (sechdrs[i].sh_flags & SHF_ALLOC))
-			continue;
-		if (!sechdrs[i].sh_size)
+		if (sect_empty(&sechdrs[i]))
 			continue;
 		sattr->address = sechdrs[i].sh_addr;
 		sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
@@ -1156,7 +1159,7 @@
 	/* Count notes sections and allocate structures.  */
 	notes = 0;
 	for (i = 0; i < nsect; i++)
-		if ((sechdrs[i].sh_flags & SHF_ALLOC) &&
+		if (!sect_empty(&sechdrs[i]) &&
 		    (sechdrs[i].sh_type == SHT_NOTE))
 			++notes;
 
@@ -1172,7 +1175,7 @@
 	notes_attrs->notes = notes;
 	nattr = &notes_attrs->attrs[0];
 	for (loaded = i = 0; i < nsect; ++i) {
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+		if (sect_empty(&sechdrs[i]))
 			continue;
 		if (sechdrs[i].sh_type == SHT_NOTE) {
 			nattr->attr.name = mod->sect_attrs->attrs[loaded].name;