WAN: Convert PC300 driver to use normal u8/u16/u32 types
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h
index cee799d..2e4f84f 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/net/wan/pc300.h
@@ -103,10 +103,6 @@
#include "hd64572.h"
#include "pc300-falc-lh.h"
-typedef __u32 uclong; /* 32 bits, unsigned */
-typedef __u16 ucshort; /* 16 bits, unsigned */
-typedef __u8 ucchar; /* 8 bits, unsigned */
-
#define PC300_PROTO_MLPPP 1
#define PC300_MAXCHAN 2 /* Number of channels per card */
@@ -147,9 +143,9 @@
* Memory access functions/macros *
* (required to support Alpha systems) *
***************************************/
-#define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();}
+#define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();}
#define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();}
-#define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();}
+#define cpc_writel(port,val) {writel((u32)(val),(port)); mb();}
#define cpc_readb(port) readb(port)
#define cpc_readw(port) readw(port)
@@ -163,15 +159,15 @@
* (memory mapped).
*/
struct RUNTIME_9050 {
- uclong loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
- uclong loc_rom_range; /* 10h : Local ROM Range */
- uclong loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
- uclong loc_rom_base; /* 24h : Local ROM Base */
- uclong loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
- uclong rom_bus_descr; /* 38h : ROM Bus Descriptor */
- uclong cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
- uclong intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
- uclong init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
+ u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
+ u32 loc_rom_range; /* 10h : Local ROM Range */
+ u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
+ u32 loc_rom_base; /* 24h : Local ROM Base */
+ u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
+ u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
+ u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
+ u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
+ u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
};
#define PLX_9050_LINT1_ENABLE 0x01
@@ -215,66 +211,66 @@
#define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */
typedef struct falc {
- ucchar sync; /* If true FALC is synchronized */
- ucchar active; /* if TRUE then already active */
- ucchar loop_active; /* if TRUE a line loopback UP was received */
- ucchar loop_gen; /* if TRUE a line loopback UP was issued */
+ u8 sync; /* If true FALC is synchronized */
+ u8 active; /* if TRUE then already active */
+ u8 loop_active; /* if TRUE a line loopback UP was received */
+ u8 loop_gen; /* if TRUE a line loopback UP was issued */
- ucchar num_channels;
- ucchar offset; /* 1 for T1, 0 for E1 */
- ucchar full_bandwidth;
+ u8 num_channels;
+ u8 offset; /* 1 for T1, 0 for E1 */
+ u8 full_bandwidth;
- ucchar xmb_cause;
- ucchar multiframe_mode;
+ u8 xmb_cause;
+ u8 multiframe_mode;
/* Statistics */
- ucshort pden; /* Pulse Density violation count */
- ucshort los; /* Loss of Signal count */
- ucshort losr; /* Loss of Signal recovery count */
- ucshort lfa; /* Loss of frame alignment count */
- ucshort farec; /* Frame Alignment Recovery count */
- ucshort lmfa; /* Loss of multiframe alignment count */
- ucshort ais; /* Remote Alarm indication Signal count */
- ucshort sec; /* One-second timer */
- ucshort es; /* Errored second */
- ucshort rai; /* remote alarm received */
- ucshort bec;
- ucshort fec;
- ucshort cvc;
- ucshort cec;
- ucshort ebc;
+ u16 pden; /* Pulse Density violation count */
+ u16 los; /* Loss of Signal count */
+ u16 losr; /* Loss of Signal recovery count */
+ u16 lfa; /* Loss of frame alignment count */
+ u16 farec; /* Frame Alignment Recovery count */
+ u16 lmfa; /* Loss of multiframe alignment count */
+ u16 ais; /* Remote Alarm indication Signal count */
+ u16 sec; /* One-second timer */
+ u16 es; /* Errored second */
+ u16 rai; /* remote alarm received */
+ u16 bec;
+ u16 fec;
+ u16 cvc;
+ u16 cec;
+ u16 ebc;
/* Status */
- ucchar red_alarm;
- ucchar blue_alarm;
- ucchar loss_fa;
- ucchar yellow_alarm;
- ucchar loss_mfa;
- ucchar prbs;
+ u8 red_alarm;
+ u8 blue_alarm;
+ u8 loss_fa;
+ u8 yellow_alarm;
+ u8 loss_mfa;
+ u8 prbs;
} falc_t;
typedef struct falc_status {
- ucchar sync; /* If true FALC is synchronized */
- ucchar red_alarm;
- ucchar blue_alarm;
- ucchar loss_fa;
- ucchar yellow_alarm;
- ucchar loss_mfa;
- ucchar prbs;
+ u8 sync; /* If true FALC is synchronized */
+ u8 red_alarm;
+ u8 blue_alarm;
+ u8 loss_fa;
+ u8 yellow_alarm;
+ u8 loss_mfa;
+ u8 prbs;
} falc_status_t;
typedef struct rsv_x21_status {
- ucchar dcd;
- ucchar dsr;
- ucchar cts;
- ucchar rts;
- ucchar dtr;
+ u8 dcd;
+ u8 dsr;
+ u8 cts;
+ u8 rts;
+ u8 dtr;
} rsv_x21_status_t;
typedef struct pc300stats {
int hw_type;
- uclong line_on;
- uclong line_off;
+ u32 line_on;
+ u32 line_off;
struct net_device_stats gen_stats;
falc_t te_stats;
} pc300stats_t;
@@ -292,14 +288,14 @@
typedef struct pc300patterntst {
char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */
- ucshort num_errors;
+ u16 num_errors;
} pc300patterntst_t;
typedef struct pc300dev {
struct pc300ch *chan;
- ucchar trace_on;
- uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */
- uclong line_off;
+ u8 trace_on;
+ u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */
+ u32 line_off;
char name[16];
struct net_device *dev;
#ifdef CONFIG_PC300_MLPPP
@@ -312,42 +308,42 @@
int bus; /* Bus (PCI, PMC, etc.) */
int nchan; /* number of channels */
int irq; /* interrupt request level */
- uclong clock; /* Board clock */
- ucchar cpld_id; /* CPLD ID (TE only) */
- ucshort cpld_reg1; /* CPLD reg 1 (TE only) */
- ucshort cpld_reg2; /* CPLD reg 2 (TE only) */
- ucshort gpioc_reg; /* PLX GPIOC reg */
- ucshort intctl_reg; /* PLX Int Ctrl/Status reg */
- uclong iophys; /* PLX registers I/O base */
- uclong iosize; /* PLX registers I/O size */
- uclong plxphys; /* PLX registers MMIO base (physical) */
+ u32 clock; /* Board clock */
+ u8 cpld_id; /* CPLD ID (TE only) */
+ u16 cpld_reg1; /* CPLD reg 1 (TE only) */
+ u16 cpld_reg2; /* CPLD reg 2 (TE only) */
+ u16 gpioc_reg; /* PLX GPIOC reg */
+ u16 intctl_reg; /* PLX Int Ctrl/Status reg */
+ u32 iophys; /* PLX registers I/O base */
+ u32 iosize; /* PLX registers I/O size */
+ u32 plxphys; /* PLX registers MMIO base (physical) */
void __iomem * plxbase; /* PLX registers MMIO base (virtual) */
- uclong plxsize; /* PLX registers MMIO size */
- uclong scaphys; /* SCA registers MMIO base (physical) */
+ u32 plxsize; /* PLX registers MMIO size */
+ u32 scaphys; /* SCA registers MMIO base (physical) */
void __iomem * scabase; /* SCA registers MMIO base (virtual) */
- uclong scasize; /* SCA registers MMIO size */
- uclong ramphys; /* On-board RAM MMIO base (physical) */
+ u32 scasize; /* SCA registers MMIO size */
+ u32 ramphys; /* On-board RAM MMIO base (physical) */
void __iomem * rambase; /* On-board RAM MMIO base (virtual) */
- uclong alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */
- uclong ramsize; /* On-board RAM MMIO size */
- uclong falcphys; /* FALC registers MMIO base (physical) */
+ u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */
+ u32 ramsize; /* On-board RAM MMIO size */
+ u32 falcphys; /* FALC registers MMIO base (physical) */
void __iomem * falcbase;/* FALC registers MMIO base (virtual) */
- uclong falcsize; /* FALC registers MMIO size */
+ u32 falcsize; /* FALC registers MMIO size */
} pc300hw_t;
typedef struct pc300chconf {
- sync_serial_settings phys_settings; /* Clock type/rate (in bps),
+ sync_serial_settings phys_settings; /* Clock type/rate (in bps),
loopback mode */
raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */
- uclong media; /* HW media (RS232, V.35, etc.) */
- uclong proto; /* Protocol (PPP, X.25, etc.) */
+ u32 media; /* HW media (RS232, V.35, etc.) */
+ u32 proto; /* Protocol (PPP, X.25, etc.) */
/* TE-specific parameters */
- ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */
- ucchar fr_mode; /* Frame Mode (ESF, D4, etc.) */
- ucchar lbo; /* Line Build Out */
- ucchar rx_sens; /* Rx Sensitivity (long- or short-haul) */
- uclong tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */
+ u8 lcode; /* Line Code (AMI, B8ZS, etc.) */
+ u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */
+ u8 lbo; /* Line Build Out */
+ u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */
+ u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */
} pc300chconf_t;
typedef struct pc300ch {
@@ -355,12 +351,12 @@
int channel;
pc300dev_t d;
pc300chconf_t conf;
- ucchar tx_first_bd; /* First TX DMA block descr. w/ data */
- ucchar tx_next_bd; /* Next free TX DMA block descriptor */
- ucchar rx_first_bd; /* First free RX DMA block descriptor */
- ucchar rx_last_bd; /* Last free RX DMA block descriptor */
- ucchar nfree_tx_bd; /* Number of free TX DMA block descriptors */
- falc_t falc; /* FALC structure (TE only) */
+ u8 tx_first_bd; /* First TX DMA block descr. w/ data */
+ u8 tx_next_bd; /* Next free TX DMA block descriptor */
+ u8 rx_first_bd; /* First free RX DMA block descriptor */
+ u8 rx_last_bd; /* Last free RX DMA block descriptor */
+ u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */
+ falc_t falc; /* FALC structure (TE only) */
} pc300ch_t;
typedef struct pc300 {