ACPI: ACPICA 20060421
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)
Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)
Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.
Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)
Defined and deployed a new OSL interface,
acpi_os_validate_address(). This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)
Defined and deployed a new OSL interface,
acpi_os_validate_interface(). This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)
Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)
Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.
The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/hardware/hwacpi.c b/drivers/acpi/hardware/hwacpi.c
index ea2f13271..de50fab 100644
--- a/drivers/acpi/hardware/hwacpi.c
+++ b/drivers/acpi/hardware/hwacpi.c
@@ -63,7 +63,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_initialize");
+ ACPI_FUNCTION_TRACE(hw_initialize);
/* We must have the ACPI tables by the time we get here */
@@ -100,7 +100,7 @@
acpi_status status;
u32 retry;
- ACPI_FUNCTION_TRACE("hw_set_mode");
+ ACPI_FUNCTION_TRACE(hw_set_mode);
/*
* ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
@@ -198,7 +198,7 @@
acpi_status status;
u32 value;
- ACPI_FUNCTION_TRACE("hw_get_mode");
+ ACPI_FUNCTION_TRACE(hw_get_mode);
/*
* ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
diff --git a/drivers/acpi/hardware/hwgpe.c b/drivers/acpi/hardware/hwgpe.c
index 729b68e..608a3a6 100644
--- a/drivers/acpi/hardware/hwgpe.c
+++ b/drivers/acpi/hardware/hwgpe.c
@@ -370,7 +370,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_disable_all_gpes");
+ ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block);
status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block);
@@ -393,7 +393,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_enable_all_runtime_gpes");
+ ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block);
return_ACPI_STATUS(status);
@@ -415,7 +415,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_enable_all_wakeup_gpes");
+ ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block);
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/hardware/hwregs.c b/drivers/acpi/hardware/hwregs.c
index 3d1f41c..ec9f5a1 100644
--- a/drivers/acpi/hardware/hwregs.c
+++ b/drivers/acpi/hardware/hwregs.c
@@ -66,7 +66,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_clear_acpi_status");
+ ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",
ACPI_BITMASK_ALL_FIXED_STATUS,
@@ -130,7 +130,7 @@
struct acpi_parameter_info info;
char *sleep_state_name;
- ACPI_FUNCTION_TRACE("acpi_get_sleep_type_data");
+ ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
/* Validate parameters */
@@ -148,7 +148,7 @@
status = acpi_ns_evaluate_by_name(sleep_state_name, &info);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "%s while evaluating sleep_state [%s]\n",
+ "%s while evaluating SleepState [%s]\n",
acpi_format_exception(status),
sleep_state_name));
@@ -208,7 +208,7 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "While evaluating sleep_state [%s], bad Sleep object %p type %s",
+ "While evaluating SleepState [%s], bad Sleep object %p type %s",
sleep_state_name, info.return_object,
acpi_ut_get_object_type_name(info.
return_object)));
@@ -236,7 +236,7 @@
ACPI_FUNCTION_ENTRY();
if (register_id > ACPI_BITREG_MAX) {
- ACPI_ERROR((AE_INFO, "Invalid bit_register ID: %X",
+ ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: %X",
register_id));
return (NULL);
}
@@ -265,7 +265,7 @@
struct acpi_bit_register_info *bit_reg_info;
acpi_status status;
- ACPI_FUNCTION_TRACE("acpi_get_register");
+ ACPI_FUNCTION_TRACE(acpi_get_register);
/* Get the info structure corresponding to the requested ACPI Register */
@@ -331,13 +331,13 @@
struct acpi_bit_register_info *bit_reg_info;
acpi_status status;
- ACPI_FUNCTION_TRACE_U32("acpi_set_register", register_id);
+ ACPI_FUNCTION_TRACE_U32(acpi_set_register, register_id);
/* Get the info structure corresponding to the requested ACPI Register */
bit_reg_info = acpi_hw_get_bit_register_info(register_id);
if (!bit_reg_info) {
- ACPI_ERROR((AE_INFO, "Bad ACPI HW register_id: %X",
+ ACPI_ERROR((AE_INFO, "Bad ACPI HW RegisterId: %X",
register_id));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -494,7 +494,7 @@
u32 value2 = 0;
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_register_read");
+ ACPI_FUNCTION_TRACE(hw_register_read);
if (ACPI_MTX_LOCK == use_lock) {
status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
@@ -607,7 +607,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("hw_register_write");
+ ACPI_FUNCTION_TRACE(hw_register_write);
if (ACPI_MTX_LOCK == use_lock) {
status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
@@ -729,7 +729,7 @@
u64 address;
acpi_status status;
- ACPI_FUNCTION_NAME("hw_low_level_read");
+ ACPI_FUNCTION_NAME(hw_low_level_read);
/*
* Must have a valid pointer to a GAS structure, and
@@ -801,7 +801,7 @@
u64 address;
acpi_status status;
- ACPI_FUNCTION_NAME("hw_low_level_write");
+ ACPI_FUNCTION_NAME(hw_low_level_write);
/*
* Must have a valid pointer to a GAS structure, and
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 685deba..8bb43ca 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -63,7 +63,7 @@
acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
{
- ACPI_FUNCTION_TRACE("acpi_set_firmware_waking_vector");
+ ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
/* Set the vector */
@@ -98,7 +98,7 @@
acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
{
- ACPI_FUNCTION_TRACE("acpi_get_firmware_waking_vector");
+ ACPI_FUNCTION_TRACE(acpi_get_firmware_waking_vector);
if (!physical_address) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
@@ -142,7 +142,7 @@
struct acpi_object_list arg_list;
union acpi_object arg;
- ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_prep");
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
/*
* _PSW methods could be run here to enable wake-on keyboard, LAN, etc.
@@ -230,7 +230,7 @@
u32 in_value;
acpi_status status;
- ACPI_FUNCTION_TRACE("acpi_enter_sleep_state");
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
(acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
@@ -399,7 +399,7 @@
u32 in_value;
acpi_status status;
- ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_s4bios");
+ ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
status =
acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
@@ -468,7 +468,7 @@
u32 PM1Acontrol;
u32 PM1Bcontrol;
- ACPI_FUNCTION_TRACE("acpi_leave_sleep_state");
+ ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
/*
* Set SLP_TYPE and SLP_EN to state S0.
diff --git a/drivers/acpi/hardware/hwtimer.c b/drivers/acpi/hardware/hwtimer.c
index a559ac1..c4ec47c 100644
--- a/drivers/acpi/hardware/hwtimer.c
+++ b/drivers/acpi/hardware/hwtimer.c
@@ -60,7 +60,7 @@
******************************************************************************/
acpi_status acpi_get_timer_resolution(u32 * resolution)
{
- ACPI_FUNCTION_TRACE("acpi_get_timer_resolution");
+ ACPI_FUNCTION_TRACE(acpi_get_timer_resolution);
if (!resolution) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
@@ -92,7 +92,7 @@
{
acpi_status status;
- ACPI_FUNCTION_TRACE("acpi_get_timer");
+ ACPI_FUNCTION_TRACE(acpi_get_timer);
if (!ticks) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
@@ -140,7 +140,7 @@
u32 delta_ticks;
acpi_integer quotient;
- ACPI_FUNCTION_TRACE("acpi_get_timer_duration");
+ ACPI_FUNCTION_TRACE(acpi_get_timer_duration);
if (!time_elapsed) {
return_ACPI_STATUS(AE_BAD_PARAMETER);