OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 9e8decf..3aaa46f 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -87,6 +87,41 @@
.audio = &omap3_audio,
};
+static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
+
+static struct regulator_init_data omap3_vdac_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies),
+ .consumer_supplies = omap3_vdda_dac_supplies,
+};
+
+static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data omap3_vpll2_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies),
+ .consumer_supplies = omap3_vpll2_supplies,
+};
+
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
@@ -259,4 +294,11 @@
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
pmic_data->codec = &omap3_codec_pdata;
+
+ /* Common regulator configurations */
+ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+ pmic_data->vdac = &omap3_vdac_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+ pmic_data->vpll2 = &omap3_vpll2_idata;
}