| /* |
| * Contains register definitions common to the Book E PowerPC |
| * specification. Notice that while the IBM-40x series of CPUs |
| * are not true Book E PowerPCs, they borrowed a number of features |
| * before Book E was finalized, and are included here as well. Unfortunatly, |
| * they sometimes used different locations than true Book E CPUs did. |
| */ |
| #ifdef __KERNEL__ |
| #ifndef __ASM_POWERPC_REG_BOOKE_H__ |
| #define __ASM_POWERPC_REG_BOOKE_H__ |
| |
| /* Machine State Register (MSR) Fields */ |
| #define MSR_GS (1<<28) /* Guest state */ |
| #define MSR_UCLE (1<<26) /* User-mode cache lock enable */ |
| #define MSR_SPE (1<<25) /* Enable SPE */ |
| #define MSR_DWE (1<<10) /* Debug Wait Enable */ |
| #define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ |
| #define MSR_IS MSR_IR /* Instruction Space */ |
| #define MSR_DS MSR_DR /* Data Space */ |
| #define MSR_PMM (1<<2) /* Performance monitor mark bit */ |
| |
| /* Default MSR for kernel mode. */ |
| #if defined (CONFIG_40x) |
| #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) |
| #elif defined(CONFIG_BOOKE) |
| #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) |
| #endif |
| |
| /* Special Purpose Registers (SPRNs)*/ |
| #define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ |
| #define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ |
| #define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ |
| #define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ |
| #define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ |
| #define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ |
| #define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ |
| #define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ |
| #define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ |
| #define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ |
| #define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ |
| #define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ |
| #define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ |
| #define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ |
| #define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ |
| #define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ |
| #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ |
| #define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ |
| #define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ |
| #define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ |
| #define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ |
| #define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ |
| #define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ |
| #define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ |
| #define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ |
| #define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ |
| #define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ |
| #define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ |
| #define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ |
| #define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ |
| #define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ |
| #define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ |
| #define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ |
| #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ |
| #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ |
| #define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ |
| #define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ |
| #define SPRN_ATB 0x20E /* Alternate Time Base */ |
| #define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ |
| #define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ |
| #define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ |
| #define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ |
| #define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ |
| #define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ |
| #define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ |
| #define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ |
| #define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ |
| #define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ |
| #define SPRN_MCSR 0x23C /* Machine Check Status Register */ |
| #define SPRN_MCAR 0x23D /* Machine Check Address Register */ |
| #define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ |
| #define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ |
| #define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ |
| #define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ |
| #define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ |
| #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ |
| #define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ |
| #define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ |
| #define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ |
| #define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ |
| #define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ |
| #define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ |
| #define SPRN_PID1 0x279 /* Process ID Register 1 */ |
| #define SPRN_PID2 0x27A /* Process ID Register 2 */ |
| #define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ |
| #define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ |
| #define SPRN_EPR 0x2BE /* External Proxy Register */ |
| #define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ |
| #define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ |
| #define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ |
| #define SPRN_MMUCR 0x3B2 /* MMU Control Register */ |
| #define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ |
| #define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ |
| #define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ |
| #define SPRN_SGR 0x3B9 /* Storage Guarded Register */ |
| #define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ |
| #define SPRN_SLER 0x3BB /* Little-endian real mode */ |
| #define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ |
| #define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ |
| #define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ |
| #define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ |
| #define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ |
| #define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ |
| #define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */ |
| #define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */ |
| #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ |
| #define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ |
| #define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ |
| #define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ |
| #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ |
| #define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ |
| #define SPRN_SVR 0x3FF /* System Version Register */ |
| |
| /* |
| * SPRs which have conflicting definitions on true Book E versus classic, |
| * or IBM 40x. |
| */ |
| #ifdef CONFIG_BOOKE |
| #define SPRN_PID 0x030 /* Process ID */ |
| #define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ |
| #define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ |
| #define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ |
| #define SPRN_DEAR 0x03D /* Data Error Address Register */ |
| #define SPRN_ESR 0x03E /* Exception Syndrome Register */ |
| #define SPRN_PIR 0x11E /* Processor Identification Register */ |
| #define SPRN_DBSR 0x130 /* Debug Status Register */ |
| #define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ |
| #define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ |
| #define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ |
| #define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ |
| #define SPRN_DAC1 0x13C /* Data Address Compare 1 */ |
| #define SPRN_DAC2 0x13D /* Data Address Compare 2 */ |
| #define SPRN_TSR 0x150 /* Timer Status Register */ |
| #define SPRN_TCR 0x154 /* Timer Control Register */ |
| #endif /* Book E */ |
| #ifdef CONFIG_40x |
| #define SPRN_PID 0x3B1 /* Process ID */ |
| #define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ |
| #define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ |
| #define SPRN_DEAR 0x3D5 /* Data Error Address Register */ |
| #define SPRN_TSR 0x3D8 /* Timer Status Register */ |
| #define SPRN_TCR 0x3DA /* Timer Control Register */ |
| #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ |
| #define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ |
| #define SPRN_DBSR 0x3F0 /* Debug Status Register */ |
| #define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ |
| #define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ |
| #define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ |
| #define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ |
| #define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ |
| #endif |
| |
| /* Bit definitions for CCR1. */ |
| #define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ |
| #define CCR1_TCS 0x00000080 /* Timer Clock Select */ |
| |
| /* Bit definitions for the MCSR. */ |
| #define MCSR_MCS 0x80000000 /* Machine Check Summary */ |
| #define MCSR_IB 0x40000000 /* Instruction PLB Error */ |
| #define MCSR_DRB 0x20000000 /* Data Read PLB Error */ |
| #define MCSR_DWB 0x10000000 /* Data Write PLB Error */ |
| #define MCSR_TLBP 0x08000000 /* TLB Parity Error */ |
| #define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ |
| #define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ |
| #define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ |
| #define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ |
| |
| #ifdef CONFIG_E500 |
| #define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ |
| #define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ |
| #define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ |
| #define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ |
| #define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ |
| #define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ |
| #define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ |
| #define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ |
| #define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ |
| #define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ |
| #define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ |
| #define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ |
| |
| /* e500 parts may set unused bits in MCSR; mask these off */ |
| #define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ |
| MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ |
| MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ |
| MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) |
| #endif |
| #ifdef CONFIG_E200 |
| #define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ |
| #define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ |
| #define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ |
| #define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn |
| fetch for an exception handler */ |
| #define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ |
| #define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ |
| #define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered |
| store or cache line push */ |
| |
| /* e200 parts may set unused bits in MCSR; mask these off */ |
| #define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ |
| MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ |
| MCSR_BUS_WRERR) |
| #endif |
| |
| /* Bit definitions for the DBSR. */ |
| /* |
| * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. |
| */ |
| #ifdef CONFIG_BOOKE |
| #define DBSR_IC 0x08000000 /* Instruction Completion */ |
| #define DBSR_BT 0x04000000 /* Branch Taken */ |
| #define DBSR_IRPT 0x02000000 /* Exception Debug Event */ |
| #define DBSR_TIE 0x01000000 /* Trap Instruction Event */ |
| #define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ |
| #define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ |
| #define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ |
| #define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ |
| #define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ |
| #define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ |
| #define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ |
| #define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ |
| #define DBSR_RET 0x00008000 /* Return Debug Event */ |
| #define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ |
| #define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ |
| #endif |
| #ifdef CONFIG_40x |
| #define DBSR_IC 0x80000000 /* Instruction Completion */ |
| #define DBSR_BT 0x40000000 /* Branch taken */ |
| #define DBSR_IRPT 0x20000000 /* Exception Debug Event */ |
| #define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ |
| #define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ |
| #define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ |
| #define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ |
| #define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ |
| #define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ |
| #define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ |
| #define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ |
| #define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ |
| #endif |
| |
| /* Bit definitions related to the ESR. */ |
| #define ESR_MCI 0x80000000 /* Machine Check - Instruction */ |
| #define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ |
| #define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ |
| #define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ |
| #define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ |
| #define ESR_PIL 0x08000000 /* Program Exception - Illegal */ |
| #define ESR_PPR 0x04000000 /* Program Exception - Privileged */ |
| #define ESR_PTR 0x02000000 /* Program Exception - Trap */ |
| #define ESR_FP 0x01000000 /* Floating Point Operation */ |
| #define ESR_DST 0x00800000 /* Storage Exception - Data miss */ |
| #define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ |
| #define ESR_ST 0x00800000 /* Store Operation */ |
| #define ESR_DLK 0x00200000 /* Data Cache Locking */ |
| #define ESR_ILK 0x00100000 /* Instr. Cache Locking */ |
| #define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ |
| #define ESR_BO 0x00020000 /* Byte Ordering */ |
| |
| /* Bit definitions related to the DBCR0. */ |
| #if defined(CONFIG_40x) |
| #define DBCR0_EDM 0x80000000 /* External Debug Mode */ |
| #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ |
| #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ |
| #define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ |
| #define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ |
| #define DBCR0_RST_CORE 0x10000000 /* Core Reset */ |
| #define DBCR0_RST_NONE 0x00000000 /* No Reset */ |
| #define DBCR0_IC 0x08000000 /* Instruction Completion */ |
| #define DBCR0_ICMP DBCR0_IC |
| #define DBCR0_BT 0x04000000 /* Branch Taken */ |
| #define DBCR0_BRT DBCR0_BT |
| #define DBCR0_EDE 0x02000000 /* Exception Debug Event */ |
| #define DBCR0_IRPT DBCR0_EDE |
| #define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ |
| #define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ |
| #define DBCR0_IAC1 DBCR0_IA1 |
| #define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ |
| #define DBCR0_IAC2 DBCR0_IA2 |
| #define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ |
| #define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ |
| #define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ |
| #define DBCR0_IAC3 DBCR0_IA3 |
| #define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ |
| #define DBCR0_IAC4 DBCR0_IA4 |
| #define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ |
| #define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ |
| #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ |
| #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ |
| #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ |
| #elif defined(CONFIG_BOOKE) |
| #define DBCR0_EDM 0x80000000 /* External Debug Mode */ |
| #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ |
| #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ |
| /* DBCR0_RST_* is 44x specific and not followed in fsl booke */ |
| #define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ |
| #define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ |
| #define DBCR0_RST_CORE 0x10000000 /* Core Reset */ |
| #define DBCR0_RST_NONE 0x00000000 /* No Reset */ |
| #define DBCR0_ICMP 0x08000000 /* Instruction Completion */ |
| #define DBCR0_IC DBCR0_ICMP |
| #define DBCR0_BRT 0x04000000 /* Branch Taken */ |
| #define DBCR0_BT DBCR0_BRT |
| #define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ |
| #define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ |
| #define DBCR0_TIE DBCR0_TDE |
| #define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ |
| #define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ |
| #define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ |
| #define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ |
| #define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ |
| #define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ |
| #define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ |
| #define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ |
| #define DBCR0_RET 0x00008000 /* Return Debug Event */ |
| #define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ |
| #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ |
| #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ |
| |
| /* Bit definitions related to the DBCR1. */ |
| #define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ |
| #define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ |
| #define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ |
| #define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ |
| #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ |
| #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ |
| |
| /* Bit definitions related to the DBCR2. */ |
| #define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ |
| #define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ |
| #define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ |
| #endif |
| |
| /* Bit definitions related to the TCR. */ |
| #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ |
| #define TCR_WP_MASK TCR_WP(3) |
| #define WP_2_17 0 /* 2^17 clocks */ |
| #define WP_2_21 1 /* 2^21 clocks */ |
| #define WP_2_25 2 /* 2^25 clocks */ |
| #define WP_2_29 3 /* 2^29 clocks */ |
| #define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ |
| #define TCR_WRC_MASK TCR_WRC(3) |
| #define WRC_NONE 0 /* No reset will occur */ |
| #define WRC_CORE 1 /* Core reset will occur */ |
| #define WRC_CHIP 2 /* Chip reset will occur */ |
| #define WRC_SYSTEM 3 /* System reset will occur */ |
| #define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ |
| #define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ |
| #define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ |
| #define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ |
| #define TCR_FP_MASK TCR_FP(3) |
| #define FP_2_9 0 /* 2^9 clocks */ |
| #define FP_2_13 1 /* 2^13 clocks */ |
| #define FP_2_17 2 /* 2^17 clocks */ |
| #define FP_2_21 3 /* 2^21 clocks */ |
| #define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ |
| #define TCR_ARE 0x00400000 /* Auto Reload Enable */ |
| |
| /* Bit definitions for the TSR. */ |
| #define TSR_ENW 0x80000000 /* Enable Next Watchdog */ |
| #define TSR_WIS 0x40000000 /* WDT Interrupt Status */ |
| #define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ |
| #define WRS_NONE 0 /* No WDT reset occurred */ |
| #define WRS_CORE 1 /* WDT forced core reset */ |
| #define WRS_CHIP 2 /* WDT forced chip reset */ |
| #define WRS_SYSTEM 3 /* WDT forced system reset */ |
| #define TSR_PIS 0x08000000 /* PIT Interrupt Status */ |
| #define TSR_DIS TSR_PIS /* DEC Interrupt Status */ |
| #define TSR_FIS 0x04000000 /* FIT Interrupt Status */ |
| |
| /* Bit definitions for the DCCR. */ |
| #define DCCR_NOCACHE 0 /* Noncacheable */ |
| #define DCCR_CACHE 1 /* Cacheable */ |
| |
| /* Bit definitions for DCWR. */ |
| #define DCWR_COPY 0 /* Copy-back */ |
| #define DCWR_WRITE 1 /* Write-through */ |
| |
| /* Bit definitions for ICCR. */ |
| #define ICCR_NOCACHE 0 /* Noncacheable */ |
| #define ICCR_CACHE 1 /* Cacheable */ |
| |
| /* Bit definitions for L1CSR0. */ |
| #define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ |
| #define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ |
| #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ |
| #define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ |
| #define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ |
| |
| /* Bit definitions for L1CSR1. */ |
| #define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ |
| #define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ |
| #define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ |
| #define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ |
| |
| /* Bit definitions for L2CSR0. */ |
| #define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ |
| #define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ |
| #define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ |
| #define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ |
| #define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ |
| #define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ |
| #define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ |
| #define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ |
| #define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ |
| #define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ |
| #define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ |
| #define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ |
| |
| /* Bit definitions for MMUCSR0 */ |
| #define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ |
| #define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ |
| #define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ |
| #define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ |
| |
| /* Bit definitions for SGR. */ |
| #define SGR_NORMAL 0 /* Speculative fetching allowed. */ |
| #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ |
| |
| /* |
| * The IBM-403 is an even more odd special case, as it is much |
| * older than the IBM-405 series. We put these down here incase someone |
| * wishes to support these machines again. |
| */ |
| #ifdef CONFIG_403GCX |
| /* Special Purpose Registers (SPRNs)*/ |
| #define SPRN_TBHU 0x3CC /* Time Base High User-mode */ |
| #define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ |
| #define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ |
| #define SPRN_TBHI 0x3DC /* Time Base High */ |
| #define SPRN_TBLO 0x3DD /* Time Base Low */ |
| #define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ |
| #define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ |
| #define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ |
| #define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ |
| #define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ |
| |
| |
| /* Bit definitions for the DBCR. */ |
| #define DBCR_EDM DBCR0_EDM |
| #define DBCR_IDM DBCR0_IDM |
| #define DBCR_RST(x) (((x) & 0x3) << 28) |
| #define DBCR_RST_NONE 0 |
| #define DBCR_RST_CORE 1 |
| #define DBCR_RST_CHIP 2 |
| #define DBCR_RST_SYSTEM 3 |
| #define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ |
| #define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ |
| #define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ |
| #define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ |
| #define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ |
| #define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ |
| #define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ |
| #define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ |
| #define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ |
| #define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ |
| #define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ |
| #define DAC_BYTE 0 |
| #define DAC_HALF 1 |
| #define DAC_WORD 2 |
| #define DAC_QUAD 3 |
| #define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ |
| #define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ |
| #define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ |
| #define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ |
| #define DBCR_SED 0x00000020 /* Second Exception Debug Event */ |
| #define DBCR_STD 0x00000010 /* Second Trap Debug Event */ |
| #define DBCR_SIA 0x00000008 /* Second IAC Enable */ |
| #define DBCR_SDA 0x00000004 /* Second DAC Enable */ |
| #define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ |
| #define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ |
| #endif /* 403GCX */ |
| #endif /* __ASM_POWERPC_REG_BOOKE_H__ */ |
| #endif /* __KERNEL__ */ |