Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/Kconfig
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0ec01e4..49f4d50 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1828,8 +1828,8 @@
the Motorola 68360 processor.
config FEC
- bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || MACH_MX27
+ bool "FEC ethernet controller (of ColdFire CPUs)"
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index bb46be2..0effefa 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -806,7 +806,7 @@
cas_phy_write(cp, MII_BMCR, BMCR_RESET);
udelay(100);
- while (limit--) {
+ while (--limit) {
val = cas_phy_read(cp, MII_BMCR);
if ((val & BMCR_RESET) == 0)
break;
@@ -979,7 +979,7 @@
writel(val, cp->regs + REG_PCS_MII_CTRL);
limit = STOP_TRIES;
- while (limit-- > 0) {
+ while (--limit > 0) {
udelay(10);
if ((readl(cp->regs + REG_PCS_MII_CTRL) &
PCS_MII_RESET) == 0)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index ea23baa..fe26502 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1675,7 +1675,7 @@
/*
* Set MII speed to 2.5 MHz
*/
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+ fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
fecp->fec_mii_speed = fep->phy_speed;
fec_restart(dev, 0);
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index c40cd8d..ac9d964 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -60,7 +60,7 @@
udelay(300);
- while (limit--) {
+ while (--limit) {
val = phy_read(phy, MII_BMCR);
if (val >= 0 && (val & BMCR_RESET) == 0)
break;
@@ -84,7 +84,7 @@
udelay(300);
- while (limit--) {
+ while (--limit) {
val = gpcs_phy_read(phy, MII_BMCR);
if (val >= 0 && (val & BMCR_RESET) == 0)
break;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 9b367ba..f5e4cad 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -699,11 +699,18 @@
/* SGMII link check is done through the PCS register. */
if ((hw->phy.media_type != e1000_media_type_copper) ||
- (igb_sgmii_active_82575(hw)))
+ (igb_sgmii_active_82575(hw))) {
ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
&duplex);
- else
+ /*
+ * Use this flag to determine if link needs to be checked or
+ * not. If we have link clear the flag so that we do not
+ * continue to check for link.
+ */
+ hw->mac.get_link_status = !hw->mac.serdes_has_link;
+ } else {
ret_val = igb_check_for_copper_link(hw);
+ }
return ret_val;
}
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 7d8c887..30657dd 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -284,11 +284,10 @@
#define IGB_FLAG_HAS_MSI (1 << 0)
#define IGB_FLAG_MSI_ENABLE (1 << 1)
-#define IGB_FLAG_HAS_DCA (1 << 2)
-#define IGB_FLAG_DCA_ENABLED (1 << 3)
-#define IGB_FLAG_IN_NETPOLL (1 << 5)
-#define IGB_FLAG_QUAD_PORT_A (1 << 6)
-#define IGB_FLAG_NEED_CTX_IDX (1 << 7)
+#define IGB_FLAG_DCA_ENABLED (1 << 2)
+#define IGB_FLAG_IN_NETPOLL (1 << 3)
+#define IGB_FLAG_QUAD_PORT_A (1 << 4)
+#define IGB_FLAG_NEED_CTX_IDX (1 << 5)
enum e1000_state_t {
__IGB_TESTING,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index cd794ba..8b80fe3 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -203,10 +203,11 @@
global_quad_port_a = 0;
- ret = pci_register_driver(&igb_driver);
#ifdef CONFIG_IGB_DCA
dca_register_notify(&dca_notifier);
#endif
+
+ ret = pci_register_driver(&igb_driver);
return ret;
}
@@ -1153,11 +1154,10 @@
/* set flags */
switch (hw->mac.type) {
- case e1000_82576:
case e1000_82575:
- adapter->flags |= IGB_FLAG_HAS_DCA;
adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
break;
+ case e1000_82576:
default:
break;
}
@@ -1306,8 +1306,7 @@
goto err_register;
#ifdef CONFIG_IGB_DCA
- if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
- (dca_add_requester(&pdev->dev) == 0)) {
+ if (dca_add_requester(&pdev->dev) == 0) {
adapter->flags |= IGB_FLAG_DCA_ENABLED;
dev_info(&pdev->dev, "DCA enabled\n");
/* Always use CB2 mode, difference is masked
@@ -1819,11 +1818,11 @@
rctl |= E1000_RCTL_SECRC;
/*
- * disable store bad packets, long packet enable, and clear size bits.
+ * disable store bad packets and clear size bits.
*/
- rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256);
+ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
- if (adapter->netdev->mtu > ETH_DATA_LEN)
+ /* enable LPE when to prevent packets larger than max_frame_size */
rctl |= E1000_RCTL_LPE;
/* Setup buffer sizes */
@@ -1849,7 +1848,7 @@
*/
/* allocations using alloc_page take too long for regular MTU
* so only enable packet split for jumbo frames */
- if (rctl & E1000_RCTL_LPE) {
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
srrctl |= adapter->rx_ps_hdr_size <<
E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
@@ -3442,19 +3441,16 @@
struct e1000_hw *hw = &adapter->hw;
unsigned long event = *(unsigned long *)data;
- if (!(adapter->flags & IGB_FLAG_HAS_DCA))
- goto out;
-
switch (event) {
case DCA_PROVIDER_ADD:
/* if already enabled, don't do it again */
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
break;
- adapter->flags |= IGB_FLAG_DCA_ENABLED;
/* Always use CB2 mode, difference is masked
* in the CB driver. */
wr32(E1000_DCA_CTRL, 2);
if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
dev_info(&adapter->pdev->dev, "DCA enabled\n");
igb_setup_dca(adapter);
break;
@@ -3471,7 +3467,7 @@
}
break;
}
-out:
+
return 0;
}
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 708ae06..a5ac2bd 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2168,7 +2168,7 @@
complete(&wl->assoc_done);
netif_carrier_on(port_to_netdev(wl_port(wl)));
} else
- pr_debug("%s: event %#lx under wpa\n",
+ pr_debug("%s: event %#llx under wpa\n",
__func__, event);
}
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index c1dadad..e6fdce9 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -787,12 +787,12 @@
struct flash_params {
u8 dev_id_str[4];
- u16 size;
- u16 csum;
- u16 ver;
- u16 sub_dev_id;
+ __le16 size;
+ __le16 csum;
+ __le16 ver;
+ __le16 sub_dev_id;
u8 mac_addr[6];
- u16 res;
+ __le16 res;
};
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 4ab6e72..04bf212 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -641,7 +641,7 @@
}
-static int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data)
+static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
{
int status = 0;
/* wait for reg to come ready */
@@ -656,8 +656,11 @@
FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
if (status)
goto exit;
- /* get the data */
- *data = ql_read32(qdev, FLASH_DATA);
+ /* This data is stored on flash as an array of
+ * __le32. Since ql_read32() returns cpu endian
+ * we need to swap it back.
+ */
+ *data = cpu_to_le32(ql_read32(qdev, FLASH_DATA));
exit:
return status;
}
@@ -666,13 +669,20 @@
{
int i;
int status;
- u32 *p = (u32 *)&qdev->flash;
+ __le32 *p = (__le32 *)&qdev->flash;
+ u32 offset = 0;
+
+ /* Second function's parameters follow the first
+ * function's.
+ */
+ if (qdev->func)
+ offset = sizeof(qdev->flash) / sizeof(u32);
if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
return -ETIMEDOUT;
for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) {
- status = ql_read_flash_word(qdev, i, p);
+ status = ql_read_flash_word(qdev, i+offset, p);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
goto exit;
@@ -3827,7 +3837,7 @@
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
- int err;
+ int err, i;
netif_device_detach(ndev);
@@ -3837,6 +3847,9 @@
return err;
}
+ for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
err = pci_save_state(pdev);
if (err)
return err;
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 211213c..2936103 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -220,9 +220,9 @@
/* make sure EEPROM has finished loading before setting GPIO_CFG */
timeout=1000;
- while ( timeout-- && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) {
+ while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
udelay(10);
- }
+
if (timeout == 0){
PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name);
return;
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 1aa9be3..da8b977 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -498,7 +498,7 @@
static void smsc9420_stop_tx(struct smsc9420_pdata *pd)
{
u32 dmac_control, mac_cr, dma_intr_ena;
- int timeOut = 1000;
+ int timeout = 1000;
/* disable TX DMAC */
dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL);
@@ -506,13 +506,13 @@
smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control);
/* Wait max 10ms for transmit process to stop */
- while (timeOut--) {
+ while (--timeout) {
if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_)
break;
udelay(10);
}
- if (!timeOut)
+ if (!timeout)
smsc_warn(IFDOWN, "TX DMAC failed to stop");
/* ACK Tx DMAC stop bit */
@@ -596,7 +596,7 @@
static void smsc9420_stop_rx(struct smsc9420_pdata *pd)
{
- int timeOut = 1000;
+ int timeout = 1000;
u32 mac_cr, dmac_control, dma_intr_ena;
/* mask RX DMAC interrupts */
@@ -617,13 +617,13 @@
smsc9420_pci_flush_write(pd);
/* wait up to 10ms for receive to stop */
- while (timeOut--) {
+ while (--timeout) {
if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_)
break;
udelay(10);
}
- if (!timeOut)
+ if (!timeout)
smsc_warn(IFDOWN, "RX DMAC did not stop! timeout.");
/* ACK the Rx DMAC stop bit */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4942059..fc1e7f1 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -148,7 +148,7 @@
cmd |= (MIF_FRAME_TAMSB);
writel(cmd, gp->regs + MIF_FRAME);
- while (limit--) {
+ while (--limit) {
cmd = readl(gp->regs + MIF_FRAME);
if (cmd & MIF_FRAME_TALSB)
break;
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 61843fd..78f8cee 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -79,7 +79,7 @@
udelay(100);
- while (limit--) {
+ while (--limit) {
val = __phy_read(phy, phy_id, MII_BMCR);
if ((val & BMCR_RESET) == 0)
break;
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 6e8f377..fe0c3f2 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -227,7 +227,7 @@
if (!(sbus_readb(mregs + MREGS_PHYCONFIG) & MREGS_PHYCONFIG_LTESTDIS)) {
int tries = 50;
- while (tries--) {
+ while (--tries) {
u8 tmp;
mdelay(5);
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 1138782..bb43e7f 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1237,7 +1237,7 @@
spin_lock_irqsave(&phy_lock, flags);
tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
- while (i--){
+ while (--i) {
if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
break;
udelay(10);
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d5d53b6..0bf2114 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -392,7 +392,7 @@
unsigned drop = 0;
int rc;
- while (rx_work--) {
+ while (--rx_work) {
u32 status, len;
dma_addr_t mapping;
struct sk_buff *skb, *copy_skb;