diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e04b751..84ec1fa 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -251,6 +251,14 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called mvsdio.
 
+config MMC_DAVINCI
+        tristate "TI DAVINCI Multimedia Card Interface support"
+        depends on ARCH_DAVINCI
+        help
+          This selects the TI DAVINCI Multimedia card Interface.
+          If you have an DAVINCI board with a Multimedia Card slot,
+          say Y or M here.  If unsure, say N.
+
 config MMC_SPI
 	tristate "MMC/SD/SDIO over SPI"
 	depends on SPI_MASTER && !HIGHMEM && HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index abcb040..dc2de37 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -25,6 +25,7 @@
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_MSM7X00A)	+= msm_sdcc.o
 obj-$(CONFIG_MMC_MVSDIO)	+= mvsdio.o
+obj-$(CONFIG_MMC_DAVINCI)       += davinci_mmc.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 ifeq ($(CONFIG_OF),y)
 obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
new file mode 100644
index 0000000..fe8f613
--- /dev/null
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -0,0 +1,1281 @@
+/*
+ * davinci_mmc.c - TI DaVinci MMC/SD/SDIO driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *       Original author: Purushotam Kumar
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/mmc.h>
+
+#include <mach/mmc.h>
+#include <mach/edma.h>
+
+/*
+ * Register Definitions
+ */
+#define DAVINCI_MMCCTL       0x00 /* Control Register                  */
+#define DAVINCI_MMCCLK       0x04 /* Memory Clock Control Register     */
+#define DAVINCI_MMCST0       0x08 /* Status Register 0                 */
+#define DAVINCI_MMCST1       0x0C /* Status Register 1                 */
+#define DAVINCI_MMCIM        0x10 /* Interrupt Mask Register           */
+#define DAVINCI_MMCTOR       0x14 /* Response Time-Out Register        */
+#define DAVINCI_MMCTOD       0x18 /* Data Read Time-Out Register       */
+#define DAVINCI_MMCBLEN      0x1C /* Block Length Register             */
+#define DAVINCI_MMCNBLK      0x20 /* Number of Blocks Register         */
+#define DAVINCI_MMCNBLC      0x24 /* Number of Blocks Counter Register */
+#define DAVINCI_MMCDRR       0x28 /* Data Receive Register             */
+#define DAVINCI_MMCDXR       0x2C /* Data Transmit Register            */
+#define DAVINCI_MMCCMD       0x30 /* Command Register                  */
+#define DAVINCI_MMCARGHL     0x34 /* Argument Register                 */
+#define DAVINCI_MMCRSP01     0x38 /* Response Register 0 and 1         */
+#define DAVINCI_MMCRSP23     0x3C /* Response Register 0 and 1         */
+#define DAVINCI_MMCRSP45     0x40 /* Response Register 0 and 1         */
+#define DAVINCI_MMCRSP67     0x44 /* Response Register 0 and 1         */
+#define DAVINCI_MMCDRSP      0x48 /* Data Response Register            */
+#define DAVINCI_MMCETOK      0x4C
+#define DAVINCI_MMCCIDX      0x50 /* Command Index Register            */
+#define DAVINCI_MMCCKC       0x54
+#define DAVINCI_MMCTORC      0x58
+#define DAVINCI_MMCTODC      0x5C
+#define DAVINCI_MMCBLNC      0x60
+#define DAVINCI_SDIOCTL      0x64
+#define DAVINCI_SDIOST0      0x68
+#define DAVINCI_SDIOEN       0x6C
+#define DAVINCI_SDIOST       0x70
+#define DAVINCI_MMCFIFOCTL   0x74 /* FIFO Control Register             */
+
+/* DAVINCI_MMCCTL definitions */
+#define MMCCTL_DATRST         (1 << 0)
+#define MMCCTL_CMDRST         (1 << 1)
+#define MMCCTL_WIDTH_4_BIT    (1 << 2)
+#define MMCCTL_DATEG_DISABLED (0 << 6)
+#define MMCCTL_DATEG_RISING   (1 << 6)
+#define MMCCTL_DATEG_FALLING  (2 << 6)
+#define MMCCTL_DATEG_BOTH     (3 << 6)
+#define MMCCTL_PERMDR_LE      (0 << 9)
+#define MMCCTL_PERMDR_BE      (1 << 9)
+#define MMCCTL_PERMDX_LE      (0 << 10)
+#define MMCCTL_PERMDX_BE      (1 << 10)
+
+/* DAVINCI_MMCCLK definitions */
+#define MMCCLK_CLKEN          (1 << 8)
+#define MMCCLK_CLKRT_MASK     (0xFF << 0)
+
+/* IRQ bit definitions, for DAVINCI_MMCST0 and DAVINCI_MMCIM */
+#define MMCST0_DATDNE         BIT(0)	/* data done */
+#define MMCST0_BSYDNE         BIT(1)	/* busy done */
+#define MMCST0_RSPDNE         BIT(2)	/* command done */
+#define MMCST0_TOUTRD         BIT(3)	/* data read timeout */
+#define MMCST0_TOUTRS         BIT(4)	/* command response timeout */
+#define MMCST0_CRCWR          BIT(5)	/* data write CRC error */
+#define MMCST0_CRCRD          BIT(6)	/* data read CRC error */
+#define MMCST0_CRCRS          BIT(7)	/* command response CRC error */
+#define MMCST0_DXRDY          BIT(9)	/* data transmit ready (fifo empty) */
+#define MMCST0_DRRDY          BIT(10)	/* data receive ready (data in fifo)*/
+#define MMCST0_DATED          BIT(11)	/* DAT3 edge detect */
+#define MMCST0_TRNDNE         BIT(12)	/* transfer done */
+
+/* DAVINCI_MMCST1 definitions */
+#define MMCST1_BUSY           (1 << 0)
+
+/* DAVINCI_MMCCMD definitions */
+#define MMCCMD_CMD_MASK       (0x3F << 0)
+#define MMCCMD_PPLEN          (1 << 7)
+#define MMCCMD_BSYEXP         (1 << 8)
+#define MMCCMD_RSPFMT_MASK    (3 << 9)
+#define MMCCMD_RSPFMT_NONE    (0 << 9)
+#define MMCCMD_RSPFMT_R1456   (1 << 9)
+#define MMCCMD_RSPFMT_R2      (2 << 9)
+#define MMCCMD_RSPFMT_R3      (3 << 9)
+#define MMCCMD_DTRW           (1 << 11)
+#define MMCCMD_STRMTP         (1 << 12)
+#define MMCCMD_WDATX          (1 << 13)
+#define MMCCMD_INITCK         (1 << 14)
+#define MMCCMD_DCLR           (1 << 15)
+#define MMCCMD_DMATRIG        (1 << 16)
+
+/* DAVINCI_MMCFIFOCTL definitions */
+#define MMCFIFOCTL_FIFORST    (1 << 0)
+#define MMCFIFOCTL_FIFODIR_WR (1 << 1)
+#define MMCFIFOCTL_FIFODIR_RD (0 << 1)
+#define MMCFIFOCTL_FIFOLEV    (1 << 2) /* 0 = 128 bits, 1 = 256 bits */
+#define MMCFIFOCTL_ACCWD_4    (0 << 3) /* access width of 4 bytes    */
+#define MMCFIFOCTL_ACCWD_3    (1 << 3) /* access width of 3 bytes    */
+#define MMCFIFOCTL_ACCWD_2    (2 << 3) /* access width of 2 bytes    */
+#define MMCFIFOCTL_ACCWD_1    (3 << 3) /* access width of 1 byte     */
+
+
+/* MMCSD Init clock in Hz in opendrain mode */
+#define MMCSD_INIT_CLOCK		200000
+
+/*
+ * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
+ * and we handle up to NR_SG segments.  MMC_BLOCK_BOUNCE kicks in only
+ * for drivers with max_hw_segs == 1, making the segments bigger (64KB)
+ * than the page or two that's otherwise typical.  NR_SG == 16 gives at
+ * least the same throughput boost, using EDMA transfer linkage instead
+ * of spending CPU time copying pages.
+ */
+#define MAX_CCNT	((1 << 16) - 1)
+
+#define NR_SG		16
+
+static unsigned rw_threshold = 32;
+module_param(rw_threshold, uint, S_IRUGO);
+MODULE_PARM_DESC(rw_threshold,
+		"Read/Write threshold. Default = 32");
+
+static unsigned __initdata use_dma = 1;
+module_param(use_dma, uint, 0);
+MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1");
+
+struct mmc_davinci_host {
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+	struct mmc_host *mmc;
+	struct clk *clk;
+	unsigned int mmc_input_clk;
+	void __iomem *base;
+	struct resource *mem_res;
+	int irq;
+	unsigned char bus_mode;
+
+#define DAVINCI_MMC_DATADIR_NONE	0
+#define DAVINCI_MMC_DATADIR_READ	1
+#define DAVINCI_MMC_DATADIR_WRITE	2
+	unsigned char data_dir;
+
+	/* buffer is used during PIO of one scatterlist segment, and
+	 * is updated along with buffer_bytes_left.  bytes_left applies
+	 * to all N blocks of the PIO transfer.
+	 */
+	u8 *buffer;
+	u32 buffer_bytes_left;
+	u32 bytes_left;
+
+	u8 rxdma, txdma;
+	bool use_dma;
+	bool do_dma;
+
+	/* Scatterlist DMA uses one or more parameter RAM entries:
+	 * the main one (associated with rxdma or txdma) plus zero or
+	 * more links.  The entries for a given transfer differ only
+	 * by memory buffer (address, length) and link field.
+	 */
+	struct edmacc_param	tx_template;
+	struct edmacc_param	rx_template;
+	unsigned		n_link;
+	u8			links[NR_SG - 1];
+
+	/* For PIO we walk scatterlists one segment at a time. */
+	unsigned int		sg_len;
+	struct scatterlist *sg;
+
+	/* Version of the MMC/SD controller */
+	u8 version;
+	/* for ns in one cycle calculation */
+	unsigned ns_in_one_cycle;
+};
+
+
+/* PIO only */
+static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host)
+{
+	host->buffer_bytes_left = sg_dma_len(host->sg);
+	host->buffer = sg_virt(host->sg);
+	if (host->buffer_bytes_left > host->bytes_left)
+		host->buffer_bytes_left = host->bytes_left;
+}
+
+static void davinci_fifo_data_trans(struct mmc_davinci_host *host,
+					unsigned int n)
+{
+	u8 *p;
+	unsigned int i;
+
+	if (host->buffer_bytes_left == 0) {
+		host->sg = sg_next(host->data->sg);
+		mmc_davinci_sg_to_buf(host);
+	}
+
+	p = host->buffer;
+	if (n > host->buffer_bytes_left)
+		n = host->buffer_bytes_left;
+	host->buffer_bytes_left -= n;
+	host->bytes_left -= n;
+
+	/* NOTE:  we never transfer more than rw_threshold bytes
+	 * to/from the fifo here; there's no I/O overlap.
+	 * This also assumes that access width( i.e. ACCWD) is 4 bytes
+	 */
+	if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+		for (i = 0; i < (n >> 2); i++) {
+			writel(*((u32 *)p), host->base + DAVINCI_MMCDXR);
+			p = p + 4;
+		}
+		if (n & 3) {
+			iowrite8_rep(host->base + DAVINCI_MMCDXR, p, (n & 3));
+			p = p + (n & 3);
+		}
+	} else {
+		for (i = 0; i < (n >> 2); i++) {
+			*((u32 *)p) = readl(host->base + DAVINCI_MMCDRR);
+			p  = p + 4;
+		}
+		if (n & 3) {
+			ioread8_rep(host->base + DAVINCI_MMCDRR, p, (n & 3));
+			p = p + (n & 3);
+		}
+	}
+	host->buffer = p;
+}
+
+static void mmc_davinci_start_command(struct mmc_davinci_host *host,
+		struct mmc_command *cmd)
+{
+	u32 cmd_reg = 0;
+	u32 im_val;
+
+	dev_dbg(mmc_dev(host->mmc), "CMD%d, arg 0x%08x%s\n",
+		cmd->opcode, cmd->arg,
+		({ char *s;
+		switch (mmc_resp_type(cmd)) {
+		case MMC_RSP_R1:
+			s = ", R1/R5/R6/R7 response";
+			break;
+		case MMC_RSP_R1B:
+			s = ", R1b response";
+			break;
+		case MMC_RSP_R2:
+			s = ", R2 response";
+			break;
+		case MMC_RSP_R3:
+			s = ", R3/R4 response";
+			break;
+		default:
+			s = ", (R? response)";
+			break;
+		}; s; }));
+	host->cmd = cmd;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+		/* There's some spec confusion about when R1B is
+		 * allowed, but if the card doesn't issue a BUSY
+		 * then it's harmless for us to allow it.
+		 */
+		cmd_reg |= MMCCMD_BSYEXP;
+		/* FALLTHROUGH */
+	case MMC_RSP_R1:		/* 48 bits, CRC */
+		cmd_reg |= MMCCMD_RSPFMT_R1456;
+		break;
+	case MMC_RSP_R2:		/* 136 bits, CRC */
+		cmd_reg |= MMCCMD_RSPFMT_R2;
+		break;
+	case MMC_RSP_R3:		/* 48 bits, no CRC */
+		cmd_reg |= MMCCMD_RSPFMT_R3;
+		break;
+	default:
+		cmd_reg |= MMCCMD_RSPFMT_NONE;
+		dev_dbg(mmc_dev(host->mmc), "unknown resp_type %04x\n",
+			mmc_resp_type(cmd));
+		break;
+	}
+
+	/* Set command index */
+	cmd_reg |= cmd->opcode;
+
+	/* Enable EDMA transfer triggers */
+	if (host->do_dma)
+		cmd_reg |= MMCCMD_DMATRIG;
+
+	if (host->version == MMC_CTLR_VERSION_2 && host->data != NULL &&
+			host->data_dir == DAVINCI_MMC_DATADIR_READ)
+		cmd_reg |= MMCCMD_DMATRIG;
+
+	/* Setting whether command involves data transfer or not */
+	if (cmd->data)
+		cmd_reg |= MMCCMD_WDATX;
+
+	/* Setting whether stream or block transfer */
+	if (cmd->flags & MMC_DATA_STREAM)
+		cmd_reg |= MMCCMD_STRMTP;
+
+	/* Setting whether data read or write */
+	if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+		cmd_reg |= MMCCMD_DTRW;
+
+	if (host->bus_mode == MMC_BUSMODE_PUSHPULL)
+		cmd_reg |= MMCCMD_PPLEN;
+
+	/* set Command timeout */
+	writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+
+	/* Enable interrupt (calculate here, defer until FIFO is stuffed). */
+	im_val =  MMCST0_RSPDNE | MMCST0_CRCRS | MMCST0_TOUTRS;
+	if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+		im_val |= MMCST0_DATDNE | MMCST0_CRCWR;
+
+		if (!host->do_dma)
+			im_val |= MMCST0_DXRDY;
+	} else if (host->data_dir == DAVINCI_MMC_DATADIR_READ) {
+		im_val |= MMCST0_DATDNE | MMCST0_CRCRD | MMCST0_TOUTRD;
+
+		if (!host->do_dma)
+			im_val |= MMCST0_DRRDY;
+	}
+
+	/*
+	 * Before non-DMA WRITE commands the controller needs priming:
+	 * FIFO should be populated with 32 bytes i.e. whatever is the FIFO size
+	 */
+	if (!host->do_dma && (host->data_dir == DAVINCI_MMC_DATADIR_WRITE))
+		davinci_fifo_data_trans(host, rw_threshold);
+
+	writel(cmd->arg, host->base + DAVINCI_MMCARGHL);
+	writel(cmd_reg,  host->base + DAVINCI_MMCCMD);
+	writel(im_val, host->base + DAVINCI_MMCIM);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* DMA infrastructure */
+
+static void davinci_abort_dma(struct mmc_davinci_host *host)
+{
+	int sync_dev;
+
+	if (host->data_dir == DAVINCI_MMC_DATADIR_READ)
+		sync_dev = host->rxdma;
+	else
+		sync_dev = host->txdma;
+
+	edma_stop(sync_dev);
+	edma_clean_channel(sync_dev);
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data);
+
+static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data)
+{
+	if (DMA_COMPLETE != ch_status) {
+		struct mmc_davinci_host *host = data;
+
+		/* Currently means:  DMA Event Missed, or "null" transfer
+		 * request was seen.  In the future, TC errors (like bad
+		 * addresses) might be presented too.
+		 */
+		dev_warn(mmc_dev(host->mmc), "DMA %s error\n",
+			(host->data->flags & MMC_DATA_WRITE)
+				? "write" : "read");
+		host->data->error = -EIO;
+		mmc_davinci_xfer_done(host, host->data);
+	}
+}
+
+/* Set up tx or rx template, to be modified and updated later */
+static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host,
+		bool tx, struct edmacc_param *template)
+{
+	unsigned	sync_dev;
+	const u16	acnt = 4;
+	const u16	bcnt = rw_threshold >> 2;
+	const u16	ccnt = 0;
+	u32		src_port = 0;
+	u32		dst_port = 0;
+	s16		src_bidx, dst_bidx;
+	s16		src_cidx, dst_cidx;
+
+	/*
+	 * A-B Sync transfer:  each DMA request is for one "frame" of
+	 * rw_threshold bytes, broken into "acnt"-size chunks repeated
+	 * "bcnt" times.  Each segment needs "ccnt" such frames; since
+	 * we tell the block layer our mmc->max_seg_size limit, we can
+	 * trust (later) that it's within bounds.
+	 *
+	 * The FIFOs are read/written in 4-byte chunks (acnt == 4) and
+	 * EDMA will optimize memory operations to use larger bursts.
+	 */
+	if (tx) {
+		sync_dev = host->txdma;
+
+		/* src_prt, ccnt, and link to be set up later */
+		src_bidx = acnt;
+		src_cidx = acnt * bcnt;
+
+		dst_port = host->mem_res->start + DAVINCI_MMCDXR;
+		dst_bidx = 0;
+		dst_cidx = 0;
+	} else {
+		sync_dev = host->rxdma;
+
+		src_port = host->mem_res->start + DAVINCI_MMCDRR;
+		src_bidx = 0;
+		src_cidx = 0;
+
+		/* dst_prt, ccnt, and link to be set up later */
+		dst_bidx = acnt;
+		dst_cidx = acnt * bcnt;
+	}
+
+	/*
+	 * We can't use FIFO mode for the FIFOs because MMC FIFO addresses
+	 * are not 256-bit (32-byte) aligned.  So we use INCR, and the W8BIT
+	 * parameter is ignored.
+	 */
+	edma_set_src(sync_dev, src_port, INCR, W8BIT);
+	edma_set_dest(sync_dev, dst_port, INCR, W8BIT);
+
+	edma_set_src_index(sync_dev, src_bidx, src_cidx);
+	edma_set_dest_index(sync_dev, dst_bidx, dst_cidx);
+
+	edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC);
+
+	edma_read_slot(sync_dev, template);
+
+	/* don't bother with irqs or chaining */
+	template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12;
+}
+
+static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host,
+		struct mmc_data *data)
+{
+	struct edmacc_param	*template;
+	int			channel, slot;
+	unsigned		link;
+	struct scatterlist	*sg;
+	unsigned		sg_len;
+	unsigned		bytes_left = host->bytes_left;
+	const unsigned		shift = ffs(rw_threshold) - 1;;
+
+	if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
+		template = &host->tx_template;
+		channel = host->txdma;
+	} else {
+		template = &host->rx_template;
+		channel = host->rxdma;
+	}
+
+	/* We know sg_len and ccnt will never be out of range because
+	 * we told the mmc layer which in turn tells the block layer
+	 * to ensure that it only hands us one scatterlist segment
+	 * per EDMA PARAM entry.  Update the PARAM
+	 * entries needed for each segment of this scatterlist.
+	 */
+	for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len;
+			sg_len-- != 0 && bytes_left;
+			sg = sg_next(sg), slot = host->links[link++]) {
+		u32		buf = sg_dma_address(sg);
+		unsigned	count = sg_dma_len(sg);
+
+		template->link_bcntrld = sg_len
+				? (EDMA_CHAN_SLOT(host->links[link]) << 5)
+				: 0xffff;
+
+		if (count > bytes_left)
+			count = bytes_left;
+		bytes_left -= count;
+
+		if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
+			template->src = buf;
+		else
+			template->dst = buf;
+		template->ccnt = count >> shift;
+
+		edma_write_slot(slot, template);
+	}
+
+	if (host->version == MMC_CTLR_VERSION_2)
+		edma_clear_event(channel);
+
+	edma_start(channel);
+}
+
+static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
+		struct mmc_data *data)
+{
+	int i;
+	int mask = rw_threshold - 1;
+
+	host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				((data->flags & MMC_DATA_WRITE)
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE));
+
+	/* no individual DMA segment should need a partial FIFO */
+	for (i = 0; i < host->sg_len; i++) {
+		if (sg_dma_len(data->sg + i) & mask) {
+			dma_unmap_sg(mmc_dev(host->mmc),
+					data->sg, data->sg_len,
+					(data->flags & MMC_DATA_WRITE)
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+			return -1;
+		}
+	}
+
+	host->do_dma = 1;
+	mmc_davinci_send_dma_request(host, data);
+
+	return 0;
+}
+
+static void __init_or_module
+davinci_release_dma_channels(struct mmc_davinci_host *host)
+{
+	unsigned	i;
+
+	if (!host->use_dma)
+		return;
+
+	for (i = 0; i < host->n_link; i++)
+		edma_free_slot(host->links[i]);
+
+	edma_free_channel(host->txdma);
+	edma_free_channel(host->rxdma);
+}
+
+static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
+{
+	int r, i;
+
+	/* Acquire master DMA write channel */
+	r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host,
+			EVENTQ_DEFAULT);
+	if (r < 0) {
+		dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+				"tx", r);
+		return r;
+	}
+	mmc_davinci_dma_setup(host, true, &host->tx_template);
+
+	/* Acquire master DMA read channel */
+	r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host,
+			EVENTQ_DEFAULT);
+	if (r < 0) {
+		dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
+				"rx", r);
+		goto free_master_write;
+	}
+	mmc_davinci_dma_setup(host, false, &host->rx_template);
+
+	/* Allocate parameter RAM slots, which will later be bound to a
+	 * channel as needed to handle a scatterlist.
+	 */
+	for (i = 0; i < ARRAY_SIZE(host->links); i++) {
+		r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY);
+		if (r < 0) {
+			dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n",
+				r);
+			break;
+		}
+		host->links[i] = r;
+	}
+	host->n_link = i;
+
+	return 0;
+
+free_master_write:
+	edma_free_channel(host->txdma);
+
+	return r;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void
+mmc_davinci_prepare_data(struct mmc_davinci_host *host, struct mmc_request *req)
+{
+	int fifo_lev = (rw_threshold == 32) ? MMCFIFOCTL_FIFOLEV : 0;
+	int timeout;
+	struct mmc_data *data = req->data;
+
+	if (host->version == MMC_CTLR_VERSION_2)
+		fifo_lev = (rw_threshold == 64) ? MMCFIFOCTL_FIFOLEV : 0;
+
+	host->data = data;
+	if (data == NULL) {
+		host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+		writel(0, host->base + DAVINCI_MMCBLEN);
+		writel(0, host->base + DAVINCI_MMCNBLK);
+		return;
+	}
+
+	dev_dbg(mmc_dev(host->mmc), "%s %s, %d blocks of %d bytes\n",
+		(data->flags & MMC_DATA_STREAM) ? "stream" : "block",
+		(data->flags & MMC_DATA_WRITE) ? "write" : "read",
+		data->blocks, data->blksz);
+	dev_dbg(mmc_dev(host->mmc), "  DTO %d cycles + %d ns\n",
+		data->timeout_clks, data->timeout_ns);
+	timeout = data->timeout_clks +
+		(data->timeout_ns / host->ns_in_one_cycle);
+	if (timeout > 0xffff)
+		timeout = 0xffff;
+
+	writel(timeout, host->base + DAVINCI_MMCTOD);
+	writel(data->blocks, host->base + DAVINCI_MMCNBLK);
+	writel(data->blksz, host->base + DAVINCI_MMCBLEN);
+
+	/* Configure the FIFO */
+	switch (data->flags & MMC_DATA_WRITE) {
+	case MMC_DATA_WRITE:
+		host->data_dir = DAVINCI_MMC_DATADIR_WRITE;
+		writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR | MMCFIFOCTL_FIFORST,
+			host->base + DAVINCI_MMCFIFOCTL);
+		writel(fifo_lev | MMCFIFOCTL_FIFODIR_WR,
+			host->base + DAVINCI_MMCFIFOCTL);
+		break;
+
+	default:
+		host->data_dir = DAVINCI_MMC_DATADIR_READ;
+		writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD | MMCFIFOCTL_FIFORST,
+			host->base + DAVINCI_MMCFIFOCTL);
+		writel(fifo_lev | MMCFIFOCTL_FIFODIR_RD,
+			host->base + DAVINCI_MMCFIFOCTL);
+		break;
+	}
+
+	host->buffer = NULL;
+	host->bytes_left = data->blocks * data->blksz;
+
+	/* For now we try to use DMA whenever we won't need partial FIFO
+	 * reads or writes, either for the whole transfer (as tested here)
+	 * or for any individual scatterlist segment (tested when we call
+	 * start_dma_transfer).
+	 *
+	 * While we *could* change that, unusual block sizes are rarely
+	 * used.  The occasional fallback to PIO should't hurt.
+	 */
+	if (host->use_dma && (host->bytes_left & (rw_threshold - 1)) == 0
+			&& mmc_davinci_start_dma_transfer(host, data) == 0) {
+		/* zero this to ensure we take no PIO paths */
+		host->bytes_left = 0;
+	} else {
+		/* Revert to CPU Copy */
+		host->sg_len = data->sg_len;
+		host->sg = host->data->sg;
+		mmc_davinci_sg_to_buf(host);
+	}
+}
+
+static void mmc_davinci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mmc_davinci_host *host = mmc_priv(mmc);
+	unsigned long timeout = jiffies + msecs_to_jiffies(900);
+	u32 mmcst1 = 0;
+
+	/* Card may still be sending BUSY after a previous operation,
+	 * typically some kind of write.  If so, we can't proceed yet.
+	 */
+	while (time_before(jiffies, timeout)) {
+		mmcst1  = readl(host->base + DAVINCI_MMCST1);
+		if (!(mmcst1 & MMCST1_BUSY))
+			break;
+		cpu_relax();
+	}
+	if (mmcst1 & MMCST1_BUSY) {
+		dev_err(mmc_dev(host->mmc), "still BUSY? bad ... \n");
+		req->cmd->error = -ETIMEDOUT;
+		mmc_request_done(mmc, req);
+		return;
+	}
+
+	host->do_dma = 0;
+	mmc_davinci_prepare_data(host, req);
+	mmc_davinci_start_command(host, req->cmd);
+}
+
+static unsigned int calculate_freq_for_card(struct mmc_davinci_host *host,
+	unsigned int mmc_req_freq)
+{
+	unsigned int mmc_freq = 0, mmc_pclk = 0, mmc_push_pull_divisor = 0;
+
+	mmc_pclk = host->mmc_input_clk;
+	if (mmc_req_freq && mmc_pclk > (2 * mmc_req_freq))
+		mmc_push_pull_divisor = ((unsigned int)mmc_pclk
+				/ (2 * mmc_req_freq)) - 1;
+	else
+		mmc_push_pull_divisor = 0;
+
+	mmc_freq = (unsigned int)mmc_pclk
+		/ (2 * (mmc_push_pull_divisor + 1));
+
+	if (mmc_freq > mmc_req_freq)
+		mmc_push_pull_divisor = mmc_push_pull_divisor + 1;
+	/* Convert ns to clock cycles */
+	if (mmc_req_freq <= 400000)
+		host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+				/ (2 * (mmc_push_pull_divisor + 1)))/1000));
+	else
+		host->ns_in_one_cycle = (1000000) / (((mmc_pclk
+				/ (2 * (mmc_push_pull_divisor + 1)))/1000000));
+
+	return mmc_push_pull_divisor;
+}
+
+static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	unsigned int open_drain_freq = 0, mmc_pclk = 0;
+	unsigned int mmc_push_pull_freq = 0;
+	struct mmc_davinci_host *host = mmc_priv(mmc);
+
+	mmc_pclk = host->mmc_input_clk;
+	dev_dbg(mmc_dev(host->mmc),
+		"clock %dHz busmode %d powermode %d Vdd %04x\n",
+		ios->clock, ios->bus_mode, ios->power_mode,
+		ios->vdd);
+	if (ios->bus_width == MMC_BUS_WIDTH_4) {
+		dev_dbg(mmc_dev(host->mmc), "Enabling 4 bit mode\n");
+		writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_WIDTH_4_BIT,
+			host->base + DAVINCI_MMCCTL);
+	} else {
+		dev_dbg(mmc_dev(host->mmc), "Disabling 4 bit mode\n");
+		writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_WIDTH_4_BIT,
+			host->base + DAVINCI_MMCCTL);
+	}
+
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+		u32 temp;
+
+		/* Ignoring the init clock value passed for fixing the inter
+		 * operability with different cards.
+		 */
+		open_drain_freq = ((unsigned int)mmc_pclk
+				/ (2 * MMCSD_INIT_CLOCK)) - 1;
+
+		if (open_drain_freq > 0xFF)
+			open_drain_freq = 0xFF;
+
+		temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+		temp |= open_drain_freq;
+		writel(temp, host->base + DAVINCI_MMCCLK);
+
+		/* Convert ns to clock cycles */
+		host->ns_in_one_cycle = (1000000) / (MMCSD_INIT_CLOCK/1000);
+	} else {
+		u32 temp;
+		mmc_push_pull_freq = calculate_freq_for_card(host, ios->clock);
+
+		if (mmc_push_pull_freq > 0xFF)
+			mmc_push_pull_freq = 0xFF;
+
+		temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKEN;
+		writel(temp, host->base + DAVINCI_MMCCLK);
+
+		udelay(10);
+
+		temp = readl(host->base + DAVINCI_MMCCLK) & ~MMCCLK_CLKRT_MASK;
+		temp |= mmc_push_pull_freq;
+		writel(temp, host->base + DAVINCI_MMCCLK);
+
+		writel(temp | MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+		udelay(10);
+	}
+
+	host->bus_mode = ios->bus_mode;
+	if (ios->power_mode == MMC_POWER_UP) {
+		unsigned long timeout = jiffies + msecs_to_jiffies(50);
+		bool lose = true;
+
+		/* Send clock cycles, poll completion */
+		writel(0, host->base + DAVINCI_MMCARGHL);
+		writel(MMCCMD_INITCK, host->base + DAVINCI_MMCCMD);
+		while (time_before(jiffies, timeout)) {
+			u32 tmp = readl(host->base + DAVINCI_MMCST0);
+
+			if (tmp & MMCST0_RSPDNE) {
+				lose = false;
+				break;
+			}
+			cpu_relax();
+		}
+		if (lose)
+			dev_warn(mmc_dev(host->mmc), "powerup timeout\n");
+	}
+
+	/* FIXME on power OFF, reset things ... */
+}
+
+static void
+mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+	host->data = NULL;
+
+	if (host->do_dma) {
+		davinci_abort_dma(host);
+
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+			     (data->flags & MMC_DATA_WRITE)
+			     ? DMA_TO_DEVICE
+			     : DMA_FROM_DEVICE);
+		host->do_dma = false;
+	}
+	host->data_dir = DAVINCI_MMC_DATADIR_NONE;
+
+	if (!data->stop || (host->cmd && host->cmd->error)) {
+		mmc_request_done(host->mmc, data->mrq);
+		writel(0, host->base + DAVINCI_MMCIM);
+	} else
+		mmc_davinci_start_command(host, data->stop);
+}
+
+static void mmc_davinci_cmd_done(struct mmc_davinci_host *host,
+				 struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] = readl(host->base + DAVINCI_MMCRSP01);
+			cmd->resp[2] = readl(host->base + DAVINCI_MMCRSP23);
+			cmd->resp[1] = readl(host->base + DAVINCI_MMCRSP45);
+			cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] = readl(host->base + DAVINCI_MMCRSP67);
+		}
+	}
+
+	if (host->data == NULL || cmd->error) {
+		if (cmd->error == -ETIMEDOUT)
+			cmd->mrq->cmd->retries = 0;
+		mmc_request_done(host->mmc, cmd->mrq);
+		writel(0, host->base + DAVINCI_MMCIM);
+	}
+}
+
+static void
+davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+	u32 temp;
+
+	/* reset command and data state machines */
+	temp = readl(host->base + DAVINCI_MMCCTL);
+	writel(temp | MMCCTL_CMDRST | MMCCTL_DATRST,
+		host->base + DAVINCI_MMCCTL);
+
+	temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
+	udelay(10);
+	writel(temp, host->base + DAVINCI_MMCCTL);
+}
+
+static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
+{
+	struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id;
+	unsigned int status, qstatus;
+	int end_command = 0;
+	int end_transfer = 0;
+	struct mmc_data *data = host->data;
+
+	if (host->cmd == NULL && host->data == NULL) {
+		status = readl(host->base + DAVINCI_MMCST0);
+		dev_dbg(mmc_dev(host->mmc),
+			"Spurious interrupt 0x%04x\n", status);
+		/* Disable the interrupt from mmcsd */
+		writel(0, host->base + DAVINCI_MMCIM);
+		return IRQ_NONE;
+	}
+
+	status = readl(host->base + DAVINCI_MMCST0);
+	qstatus = status;
+
+	/* handle FIFO first when using PIO for data.
+	 * bytes_left will decrease to zero as I/O progress and status will
+	 * read zero over iteration because this controller status
+	 * register(MMCST0) reports any status only once and it is cleared
+	 * by read. So, it is not unbouned loop even in the case of
+	 * non-dma.
+	 */
+	while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) {
+		davinci_fifo_data_trans(host, rw_threshold);
+		status = readl(host->base + DAVINCI_MMCST0);
+		if (!status)
+			break;
+		qstatus |= status;
+	}
+
+	if (qstatus & MMCST0_DATDNE) {
+		/* All blocks sent/received, and CRC checks passed */
+		if (data != NULL) {
+			if ((host->do_dma == 0) && (host->bytes_left > 0)) {
+				/* if datasize < rw_threshold
+				 * no RX ints are generated
+				 */
+				davinci_fifo_data_trans(host, host->bytes_left);
+			}
+			end_transfer = 1;
+			data->bytes_xfered = data->blocks * data->blksz;
+		} else {
+			dev_err(mmc_dev(host->mmc),
+					"DATDNE with no host->data\n");
+		}
+	}
+
+	if (qstatus & MMCST0_TOUTRD) {
+		/* Read data timeout */
+		data->error = -ETIMEDOUT;
+		end_transfer = 1;
+
+		dev_dbg(mmc_dev(host->mmc),
+			"read data timeout, status %x\n",
+			qstatus);
+
+		davinci_abort_data(host, data);
+	}
+
+	if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
+		/* Data CRC error */
+		data->error = -EILSEQ;
+		end_transfer = 1;
+
+		/* NOTE:  this controller uses CRCWR to report both CRC
+		 * errors and timeouts (on writes).  MMCDRSP values are
+		 * only weakly documented, but 0x9f was clearly a timeout
+		 * case and the two three-bit patterns in various SD specs
+		 * (101, 010) aren't part of it ...
+		 */
+		if (qstatus & MMCST0_CRCWR) {
+			u32 temp = readb(host->base + DAVINCI_MMCDRSP);
+
+			if (temp == 0x9f)
+				data->error = -ETIMEDOUT;
+		}
+		dev_dbg(mmc_dev(host->mmc), "data %s %s error\n",
+			(qstatus & MMCST0_CRCWR) ? "write" : "read",
+			(data->error == -ETIMEDOUT) ? "timeout" : "CRC");
+
+		davinci_abort_data(host, data);
+	}
+
+	if (qstatus & MMCST0_TOUTRS) {
+		/* Command timeout */
+		if (host->cmd) {
+			dev_dbg(mmc_dev(host->mmc),
+				"CMD%d timeout, status %x\n",
+				host->cmd->opcode, qstatus);
+			host->cmd->error = -ETIMEDOUT;
+			if (data) {
+				end_transfer = 1;
+				davinci_abort_data(host, data);
+			} else
+				end_command = 1;
+		}
+	}
+
+	if (qstatus & MMCST0_CRCRS) {
+		/* Command CRC error */
+		dev_dbg(mmc_dev(host->mmc), "Command CRC error\n");
+		if (host->cmd) {
+			host->cmd->error = -EILSEQ;
+			end_command = 1;
+		}
+	}
+
+	if (qstatus & MMCST0_RSPDNE) {
+		/* End of command phase */
+		end_command = (int) host->cmd;
+	}
+
+	if (end_command)
+		mmc_davinci_cmd_done(host, host->cmd);
+	if (end_transfer)
+		mmc_davinci_xfer_done(host, data);
+	return IRQ_HANDLED;
+}
+
+static int mmc_davinci_get_cd(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = to_platform_device(mmc->parent);
+	struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+	if (!config || !config->get_cd)
+		return -ENOSYS;
+	return config->get_cd(pdev->id);
+}
+
+static int mmc_davinci_get_ro(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = to_platform_device(mmc->parent);
+	struct davinci_mmc_config *config = pdev->dev.platform_data;
+
+	if (!config || !config->get_ro)
+		return -ENOSYS;
+	return config->get_ro(pdev->id);
+}
+
+static struct mmc_host_ops mmc_davinci_ops = {
+	.request	= mmc_davinci_request,
+	.set_ios	= mmc_davinci_set_ios,
+	.get_cd		= mmc_davinci_get_cd,
+	.get_ro		= mmc_davinci_get_ro,
+};
+
+/*----------------------------------------------------------------------*/
+
+static void __init init_mmcsd_host(struct mmc_davinci_host *host)
+{
+	/* DAT line portion is diabled and in reset state */
+	writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_DATRST,
+		host->base + DAVINCI_MMCCTL);
+
+	/* CMD line portion is diabled and in reset state */
+	writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_CMDRST,
+		host->base + DAVINCI_MMCCTL);
+
+	udelay(10);
+
+	writel(0, host->base + DAVINCI_MMCCLK);
+	writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
+
+	writel(0x1FFF, host->base + DAVINCI_MMCTOR);
+	writel(0xFFFF, host->base + DAVINCI_MMCTOD);
+
+	writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_DATRST,
+		host->base + DAVINCI_MMCCTL);
+	writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_CMDRST,
+		host->base + DAVINCI_MMCCTL);
+
+	udelay(10);
+}
+
+static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+{
+	struct davinci_mmc_config *pdata = pdev->dev.platform_data;
+	struct mmc_davinci_host *host = NULL;
+	struct mmc_host *mmc = NULL;
+	struct resource *r, *mem = NULL;
+	int ret = 0, irq = 0;
+	size_t mem_size;
+
+	/* REVISIT:  when we're fully converted, fail if pdata is NULL */
+
+	ret = -ENODEV;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq == NO_IRQ)
+		goto out;
+
+	ret = -EBUSY;
+	mem_size = resource_size(r);
+	mem = request_mem_region(r->start, mem_size, pdev->name);
+	if (!mem)
+		goto out;
+
+	ret = -ENOMEM;
+	mmc = mmc_alloc_host(sizeof(struct mmc_davinci_host), &pdev->dev);
+	if (!mmc)
+		goto out;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;	/* Important */
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!r)
+		goto out;
+	host->rxdma = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!r)
+		goto out;
+	host->txdma = r->start;
+
+	host->mem_res = mem;
+	host->base = ioremap(mem->start, mem_size);
+	if (!host->base)
+		goto out;
+
+	ret = -ENXIO;
+	host->clk = clk_get(&pdev->dev, "MMCSDCLK");
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		goto out;
+	}
+	clk_enable(host->clk);
+	host->mmc_input_clk = clk_get_rate(host->clk);
+
+	init_mmcsd_host(host);
+
+	host->use_dma = use_dma;
+	host->irq = irq;
+
+	if (host->use_dma && davinci_acquire_dma_channels(host) != 0)
+		host->use_dma = 0;
+
+	/* REVISIT:  someday, support IRQ-driven card detection.  */
+	mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+	if (!pdata || pdata->wires == 4 || pdata->wires == 0)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	host->version = pdata->version;
+
+	mmc->ops = &mmc_davinci_ops;
+	mmc->f_min = 312500;
+	mmc->f_max = 25000000;
+	if (pdata && pdata->max_freq)
+		mmc->f_max = pdata->max_freq;
+	if (pdata && pdata->caps)
+		mmc->caps |= pdata->caps;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	/* With no iommu coalescing pages, each phys_seg is a hw_seg.
+	 * Each hw_seg uses one EDMA parameter RAM slot, always one
+	 * channel and then usually some linked slots.
+	 */
+	mmc->max_hw_segs	= 1 + host->n_link;
+	mmc->max_phys_segs	= mmc->max_hw_segs;
+
+	/* EDMA limit per hw segment (one or two MBytes) */
+	mmc->max_seg_size	= MAX_CCNT * rw_threshold;
+
+	/* MMC/SD controller limits for multiblock requests */
+	mmc->max_blk_size	= 4095;  /* BLEN is 12 bits */
+	mmc->max_blk_count	= 65535; /* NBLK is 16 bits */
+	mmc->max_req_size	= mmc->max_blk_size * mmc->max_blk_count;
+
+	dev_dbg(mmc_dev(host->mmc), "max_phys_segs=%d\n", mmc->max_phys_segs);
+	dev_dbg(mmc_dev(host->mmc), "max_hw_segs=%d\n", mmc->max_hw_segs);
+	dev_dbg(mmc_dev(host->mmc), "max_blk_size=%d\n", mmc->max_blk_size);
+	dev_dbg(mmc_dev(host->mmc), "max_req_size=%d\n", mmc->max_req_size);
+	dev_dbg(mmc_dev(host->mmc), "max_seg_size=%d\n", mmc->max_seg_size);
+
+	platform_set_drvdata(pdev, host);
+
+	ret = mmc_add_host(mmc);
+	if (ret < 0)
+		goto out;
+
+	ret = request_irq(irq, mmc_davinci_irq, 0, mmc_hostname(mmc), host);
+	if (ret)
+		goto out;
+
+	rename_region(mem, mmc_hostname(mmc));
+
+	dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n",
+		host->use_dma ? "DMA" : "PIO",
+		(mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1);
+
+	return 0;
+
+out:
+	if (host) {
+		davinci_release_dma_channels(host);
+
+		if (host->clk) {
+			clk_disable(host->clk);
+			clk_put(host->clk);
+		}
+
+		if (host->base)
+			iounmap(host->base);
+	}
+
+	if (mmc)
+		mmc_free_host(mmc);
+
+	if (mem)
+		release_resource(mem);
+
+	dev_dbg(&pdev->dev, "probe err %d\n", ret);
+
+	return ret;
+}
+
+static int __exit davinci_mmcsd_remove(struct platform_device *pdev)
+{
+	struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	if (host) {
+		mmc_remove_host(host->mmc);
+		free_irq(host->irq, host);
+
+		davinci_release_dma_channels(host);
+
+		clk_disable(host->clk);
+		clk_put(host->clk);
+
+		iounmap(host->base);
+
+		release_resource(host->mem_res);
+
+		mmc_free_host(host->mmc);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int davinci_mmcsd_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+	return mmc_suspend_host(host->mmc, msg);
+}
+
+static int davinci_mmcsd_resume(struct platform_device *pdev)
+{
+	struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+
+	return mmc_resume_host(host->mmc);
+}
+#else
+#define davinci_mmcsd_suspend	NULL
+#define davinci_mmcsd_resume	NULL
+#endif
+
+static struct platform_driver davinci_mmcsd_driver = {
+	.driver		= {
+		.name	= "davinci_mmc",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(davinci_mmcsd_remove),
+	.suspend	= davinci_mmcsd_suspend,
+	.resume		= davinci_mmcsd_resume,
+};
+
+static int __init davinci_mmcsd_init(void)
+{
+	return platform_driver_probe(&davinci_mmcsd_driver,
+				     davinci_mmcsd_probe);
+}
+module_init(davinci_mmcsd_init);
+
+static void __exit davinci_mmcsd_exit(void)
+{
+	platform_driver_unregister(&davinci_mmcsd_driver);
+}
+module_exit(davinci_mmcsd_exit);
+
+MODULE_AUTHOR("Texas Instruments India");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller");
+