bnx2x: Loopback in diag mode
When loading in diag mode, set the device to loopback instead of normal link and
then changing it to loopback mode
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 891a58e..88eeee91 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1062,10 +1062,10 @@
#define BNX2X_NUM_TESTS 7
-#define BNX2X_MAC_LOOPBACK 0
-#define BNX2X_PHY_LOOPBACK 1
-#define BNX2X_MAC_LOOPBACK_FAILED 1
-#define BNX2X_PHY_LOOPBACK_FAILED 2
+#define BNX2X_PHY_LOOPBACK 0
+#define BNX2X_MAC_LOOPBACK 1
+#define BNX2X_PHY_LOOPBACK_FAILED 1
+#define BNX2X_MAC_LOOPBACK_FAILED 2
#define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \
BNX2X_PHY_LOOPBACK_FAILED)
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index a14fe75..96e23fd 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -2064,7 +2064,7 @@
}
}
-static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
+static u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
{
if (!BP_NOMCP(bp)) {
u8 rc;
@@ -2080,14 +2080,20 @@
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
bnx2x_acquire_phy_lock(bp);
+
+ if (load_mode == LOAD_DIAG)
+ bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
+
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+
bnx2x_release_phy_lock(bp);
bnx2x_calc_fc_adv(bp);
- if (bp->link_vars.link_up)
+ if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
+ bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
bnx2x_link_report(bp);
-
+ }
return rc;
}
@@ -6942,7 +6948,7 @@
bnx2x_set_mac_addr_e1h(bp, 1);
if (bp->port.pmf)
- bnx2x_initial_phy_init(bp);
+ bnx2x_initial_phy_init(bp, load_mode);
/* Start fast path */
switch (load_mode) {
@@ -9328,23 +9334,23 @@
u16 len;
int rc = -ENODEV;
- if (loopback_mode == BNX2X_MAC_LOOPBACK) {
+ /* check the loopback mode */
+ switch (loopback_mode) {
+ case BNX2X_PHY_LOOPBACK:
+ if (bp->link_params.loopback_mode != LOOPBACK_XGXS_10)
+ return -EINVAL;
+ break;
+ case BNX2X_MAC_LOOPBACK:
bp->link_params.loopback_mode = LOOPBACK_BMAC;
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-
- } else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
- u16 cnt = 1000;
- bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
- bnx2x_phy_init(&bp->link_params, &bp->link_vars);
- /* wait until link state is restored */
- if (link_up)
- while (cnt-- && bnx2x_test_link(&bp->link_params,
- &bp->link_vars))
- msleep(10);
- } else
+ break;
+ default:
return -EINVAL;
+ }
- pkt_size = 1514;
+ /* prepare the loopback packet */
+ pkt_size = (((bp->dev->mtu < ETH_MAX_PACKET_SIZE) ?
+ bp->dev->mtu : ETH_MAX_PACKET_SIZE) + ETH_HLEN);
skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size);
if (!skb) {
rc = -ENOMEM;
@@ -9356,6 +9362,7 @@
for (i = ETH_HLEN; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
+ /* send the loopback packet */
num_pkts = 0;
tx_start_idx = le16_to_cpu(*fp->tx_cons_sb);
rx_start_idx = le16_to_cpu(*fp->rx_cons_sb);
@@ -9440,7 +9447,7 @@
static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
{
- int rc = 0;
+ int rc = 0, res;
if (!netif_running(bp->dev))
return BNX2X_LOOPBACK_FAILED;
@@ -9448,14 +9455,16 @@
bnx2x_netif_stop(bp, 1);
bnx2x_acquire_phy_lock(bp);
- if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
- DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
- rc |= BNX2X_MAC_LOOPBACK_FAILED;
+ res = bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up);
+ if (res) {
+ DP(NETIF_MSG_PROBE, " PHY loopback failed (res %d)\n", res);
+ rc |= BNX2X_PHY_LOOPBACK_FAILED;
}
- if (bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up)) {
- DP(NETIF_MSG_PROBE, "PHY loopback failed\n");
- rc |= BNX2X_PHY_LOOPBACK_FAILED;
+ res = bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up);
+ if (res) {
+ DP(NETIF_MSG_PROBE, " MAC loopback failed (res %d)\n", res);
+ rc |= BNX2X_MAC_LOOPBACK_FAILED;
}
bnx2x_release_phy_lock(bp);