chelsio: the return statement is not a function
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
index 82fed1d..87dde3e 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/chelsio/my3126.c
@@ -10,25 +10,25 @@
* This can be done through registers. It is not required since
* a full chip reset is used.
*/
- return (0);
+ return 0;
}
static int my3126_interrupt_enable(struct cphy *cphy)
{
schedule_delayed_work(&cphy->phy_update, HZ/30);
t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
- return (0);
+ return 0;
}
static int my3126_interrupt_disable(struct cphy *cphy)
{
cancel_rearming_delayed_work(&cphy->phy_update);
- return (0);
+ return 0;
}
static int my3126_interrupt_clear(struct cphy *cphy)
{
- return (0);
+ return 0;
}
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
@@ -102,7 +102,7 @@
static int my3126_set_loopback(struct cphy *cphy, int on)
{
- return (0);
+ return 0;
}
/* To check the activity LED */
@@ -146,7 +146,7 @@
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
- return (0);
+ return 0;
}
static void my3126_destroy(struct cphy *cphy)
@@ -177,7 +177,7 @@
INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
cphy->bmsr = 0;
- return (cphy);
+ return cphy;
}
/* Chip Reset */
@@ -198,7 +198,7 @@
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
- return (0);
+ return 0;
}
struct gphy t1_my3126_ops = {
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c
index 3355441..8c4a31e 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/chelsio/vsc7326.c
@@ -256,7 +256,7 @@
else if((result & (1<<8)) != 0x0)
CH_ERR("bist read error: 0x%x\n", result);
- return(result & 0xff);
+ return (result & 0xff);
}
static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
@@ -286,7 +286,7 @@
else if((result & (1<<26)) != 0x0)
CH_ERR("bist write error: 0x%x\n", result);
- return(0);
+ return 0;
}
static int run_bist(adapter_t *adapter, int moduleid)
@@ -295,7 +295,7 @@
(void) bist_wr(adapter,moduleid, 0x00, 0x02);
(void) bist_wr(adapter,moduleid, 0x01, 0x01);
- return(0);
+ return 0;
}
static int check_bist(adapter_t *adapter, int moduleid)
@@ -309,14 +309,14 @@
if ((result & 3) != 0x3)
CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
result, moduleid, column);
- return(0);
+ return 0;
}
static int enable_mem(adapter_t *adapter, int moduleid)
{
/*enable mem*/
(void) bist_wr(adapter,moduleid, 0x00, 0x00);
- return(0);
+ return 0;
}
static int run_bist_all(adapter_t *adapter)
@@ -358,7 +358,7 @@
udelay(300);
vsc_write(adapter, REG_MEM_BIST, 0x0);
mdelay(10);
- return(0);
+ return 0;
}
static int mac_intr_handler(struct cmac *mac)