| /* MN10300 Core system registers |
| * |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public Licence |
| * as published by the Free Software Foundation; either version |
| * 2 of the Licence, or (at your option) any later version. |
| */ |
| #ifndef _ASM_CPU_REGS_H |
| #define _ASM_CPU_REGS_H |
| |
| #ifndef __ASSEMBLY__ |
| #include <linux/types.h> |
| #endif |
| |
| #ifdef CONFIG_MN10300_CPU_AM33V2 |
| /* we tell the compiler to pretend to be AM33 so that it doesn't try and use |
| * the FP regs, but tell the assembler that we're actually allowed AM33v2 |
| * instructions */ |
| #ifndef __ASSEMBLY__ |
| asm(" .am33_2\n"); |
| #else |
| .am33_2 |
| #endif |
| #endif |
| |
| #ifdef __KERNEL__ |
| |
| #ifndef __ASSEMBLY__ |
| #define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) |
| #define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) |
| #else |
| #define __SYSREG(ADDR, TYPE) ADDR |
| #define __SYSREGC(ADDR, TYPE) ADDR |
| #endif |
| |
| /* CPU registers */ |
| #define EPSW_FLAG_Z 0x00000001 /* zero flag */ |
| #define EPSW_FLAG_N 0x00000002 /* negative flag */ |
| #define EPSW_FLAG_C 0x00000004 /* carry flag */ |
| #define EPSW_FLAG_V 0x00000008 /* overflow flag */ |
| #define EPSW_IM 0x00000700 /* interrupt mode */ |
| #define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ |
| #define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ |
| #define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ |
| #define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ |
| #define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ |
| #define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ |
| #define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ |
| #define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ |
| #define EPSW_IE 0x00000800 /* interrupt enable */ |
| #define EPSW_S 0x00003000 /* software auxilliary bits */ |
| #define EPSW_T 0x00008000 /* trace enable */ |
| #define EPSW_nSL 0x00010000 /* not supervisor level */ |
| #define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ |
| #define EPSW_nAR 0x00040000 /* register bank control */ |
| #define EPSW_ML 0x00080000 /* monitor level */ |
| #define EPSW_FE 0x00100000 /* FPU enable */ |
| |
| /* FPU registers */ |
| #define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ |
| #define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ |
| #define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ |
| #define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ |
| #define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ |
| #define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ |
| #define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ |
| #define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ |
| #define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ |
| #define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ |
| #define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ |
| #define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ |
| #define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ |
| #define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ |
| #define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ |
| #define FPCR_RM 0x00030000 /* rounding mode */ |
| #define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ |
| #define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ |
| #define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ |
| #define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ |
| #define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ |
| #define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ |
| |
| /* CPU control registers */ |
| #define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ |
| #define CPUP_DWBD 0x0020 /* write buffer disable flag */ |
| #define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ |
| #define CPUP_EXM 0x0080 /* exception operation mode */ |
| #define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ |
| #define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ |
| |
| #define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ |
| #define CPUM_SLEEP 0x0004 /* set to enter sleep state */ |
| #define CPUM_HALT 0x0008 /* set to enter halt state */ |
| #define CPUM_STOP 0x0010 /* set to enter stop state */ |
| |
| #define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ |
| #define CPUREV_TYPE 0x0000000f /* CPU type */ |
| #define CPUREV_TYPE_S 0 |
| #define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ |
| #define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ |
| #define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ |
| #define CPUREV_REVISION 0x000000f0 /* CPU revision */ |
| #define CPUREV_REVISION_S 4 |
| #define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ |
| #define CPUREV_ICWAY_S 8 |
| #define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ |
| #define CPUREV_ICSIZE_S 12 |
| #define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ |
| #define CPUREV_DCWAY_S 16 |
| #define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ |
| #define CPUREV_DCSIZE_S 20 |
| #define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ |
| #define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ |
| #define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ |
| |
| #define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ |
| |
| /* interrupt/exception control registers */ |
| #define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ |
| #define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ |
| #define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ |
| #define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ |
| #define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ |
| #define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ |
| #define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ |
| |
| #define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ |
| #define TBR_TB 0xff000000 /* table base address bits 31-24 */ |
| #define TBR_INT_CODE 0x00ffffff /* interrupt code */ |
| |
| #define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ |
| |
| #define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ |
| #define sISR_IRQICE 0x00000001 /* ICE interrupt */ |
| #define sISR_ISTEP 0x00000002 /* single step interrupt */ |
| #define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ |
| #define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ |
| #define sISR_PIEXE 0x00000010 /* program interrupt */ |
| #define sISR_MEMERR 0x00000020 /* illegal memory access fault */ |
| #define sISR_IBREAK 0x00000040 /* instraction break interrupt */ |
| #define sISR_DBSRL 0x00000080 /* debug serial interrupt */ |
| #define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ |
| #define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ |
| #define sISR_OBREAK 0x00000400 /* operand break interrupt */ |
| #define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ |
| #define sISR_BUSERR 0x00001000 /* bus error fault */ |
| #define sISR_DBLFT 0x00002000 /* double fault */ |
| #define sISR_DBG 0x00008000 /* debug reserved interrupt */ |
| #define sISR_ITMISS 0x00010000 /* instruction TLB miss */ |
| #define sISR_DTMISS 0x00020000 /* data TLB miss */ |
| #define sISR_ITEX 0x00040000 /* instruction TLB access exception */ |
| #define sISR_DTEX 0x00080000 /* data TLB access exception */ |
| #define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ |
| #define sISR_ILGDA 0x00200000 /* illegal data access exception */ |
| #define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ |
| #define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ |
| #define sISR_PRIDA 0x01000000 /* privileged space data access excep */ |
| #define sISR_DISA 0x02000000 /* data space instruction access excep */ |
| #define sISR_SYSC 0x04000000 /* system call instruction excep */ |
| #define sISR_FPUD 0x08000000 /* FPU disabled excep */ |
| #define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ |
| #define sISR_FPUOP 0x20000000 /* FPU operation excep */ |
| #define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ |
| |
| /* cache control registers */ |
| #define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ |
| #define CHCTR_ICEN 0x0001 /* instruction cache enable */ |
| #define CHCTR_DCEN 0x0002 /* data cache enable */ |
| #define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ |
| #define CHCTR_DCBUSY 0x0008 /* data cache busy */ |
| #define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ |
| #define CHCTR_DCINV 0x0020 /* data cache invalidate */ |
| #define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ |
| #define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ |
| #define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ |
| #define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ |
| #define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ |
| #define CHCTR_DCWMD 0xf000 /* data cache way mode */ |
| |
| /* MMU control registers */ |
| #define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ |
| #define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ |
| #define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ |
| #define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ |
| #define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ |
| #define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ |
| #define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ |
| #define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ |
| #define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ |
| #define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ |
| #define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ |
| #define MMUCTR_CE 0x00008000 /* cacheable bit enable */ |
| #define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ |
| #define MMUCTR_DTE 0x00400000 /* data TLB enable */ |
| #define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ |
| #define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ |
| #define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ |
| #define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ |
| #define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ |
| #define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ |
| #define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ |
| #define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ |
| |
| #define PIDR __SYSREG(0xc0000094, u16) /* PID register */ |
| #define PIDR_PID 0x00ff /* process identifier */ |
| |
| #define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ |
| |
| #define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ |
| #define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ |
| #define xPTEL_V 0x00000001 /* TLB entry valid */ |
| #define xPTEL_UNUSED1 0x00000002 /* unused bit */ |
| #define xPTEL_UNUSED2 0x00000004 /* unused bit */ |
| #define xPTEL_C 0x00000008 /* cached if set */ |
| #define xPTEL_PV 0x00000010 /* page valid */ |
| #define xPTEL_D 0x00000020 /* dirty */ |
| #define xPTEL_PR 0x000001c0 /* page protection */ |
| #define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ |
| #define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ |
| #define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ |
| #define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ |
| #define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ |
| #define xPTEL_G 0x00000200 /* global (use PID if 0) */ |
| #define xPTEL_PS 0x00000c00 /* page size */ |
| #define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ |
| #define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ |
| #define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ |
| #define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ |
| #define xPTEL_PPN 0xfffff006 /* physical page number */ |
| |
| #define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ |
| #define xPTEL_UNUSED1_BIT 1 |
| #define xPTEL_UNUSED2_BIT 2 |
| #define xPTEL_C_BIT 3 |
| #define xPTEL_PV_BIT 4 |
| #define xPTEL_D_BIT 5 |
| #define xPTEL_G_BIT 9 |
| |
| #define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ |
| #define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ |
| #define xPTEU_VPN 0xfffffc00 /* virtual page number */ |
| #define xPTEU_PID 0x000000ff /* process identifier to which applicable */ |
| |
| #define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ |
| #define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ |
| #define xPTEL2_V 0x00000001 /* TLB entry valid */ |
| #define xPTEL2_C 0x00000002 /* cacheable */ |
| #define xPTEL2_PV 0x00000004 /* page valid */ |
| #define xPTEL2_D 0x00000008 /* dirty */ |
| #define xPTEL2_PR 0x00000070 /* page protection */ |
| #define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ |
| #define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ |
| #define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ |
| #define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ |
| #define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ |
| #define xPTEL2_G 0x00000080 /* global (use PID if 0) */ |
| #define xPTEL2_PS 0x00000300 /* page size */ |
| #define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ |
| #define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ |
| #define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ |
| #define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ |
| #define xPTEL2_PPN 0xfffffc00 /* physical page number */ |
| |
| #define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ |
| #define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ |
| #define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ |
| #define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ |
| #define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ |
| #define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ |
| #define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ |
| #define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ |
| #define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ |
| #define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ |
| #define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ |
| #define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ |
| #define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ |
| #define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ |
| #define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ |
| #define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ |
| #define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ |
| #define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ |
| #define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ |
| #define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* _ASM_CPU_REGS_H */ |