diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt
index 141087c..fd2bd56 100644
--- a/Documentation/devicetree/bindings/gpio/led.txt
+++ b/Documentation/devicetree/bindings/gpio/led.txt
@@ -7,9 +7,9 @@
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
-  low LEDs should be indicated using flags in the GPIO specifier.
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ecc6a6c..a20008a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -30,6 +30,7 @@
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0ffac0..1bea46a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,17 +510,3 @@
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What:	The CAP9 SoC family will be removed
-When:	3.4
-Files:	arch/arm/mach-at91/at91cap9.c
-	arch/arm/mach-at91/at91cap9_devices.c
-	arch/arm/mach-at91/include/mach/at91cap9.h
-	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
-	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
-	arch/arm/mach-at91/board-cap9adk.c
-Why:	The code is not actively maintained and platforms are now hard to find.
-Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
-	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index a22ecf4..52729a7 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -7,21 +7,29 @@
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
+  * Atmel AT30TS00
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index f274c28..2f95308 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -13,7 +13,8 @@
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 033d4e6..d99fd9c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2211,6 +2211,12 @@
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e41d52..3321d75 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -962,7 +962,7 @@
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1310,7 +1310,7 @@
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1318,7 +1318,7 @@
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
diff --git a/Makefile b/Makefile
index 66d13c9..56d4817 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index e8a761a..f939794 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -108,7 +108,7 @@
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc..0937f42 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@
 	select CLKDEV_LOOKUP
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 and AT91CAP9 processors.
+	  AT91SAM9 processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
@@ -1127,6 +1127,7 @@
 config ARM_TIMER_SP804
 	bool
 	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 
 source arch/arm/mm/Kconfig
 
@@ -1280,7 +1281,7 @@
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03646c4..b895a2a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -86,7 +86,7 @@
 		depends on HAVE_AT91_DBGU0
 
 	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
 	config DEBUG_CLPS711X_UART1
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff..3c79f85 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -3,3 +3,4 @@
 xipImage
 bootpImage
 uImage
+*.dtb
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
new file mode 100644
index 0000000..e64eb93
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -0,0 +1,37 @@
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x5.dtsi"
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
new file mode 100644
index 0000000..e91391f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -0,0 +1,172 @@
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				interrupt-parent;
+				reg = <0xfffff000 0x200>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 4>;
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				interrupts = <5 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 4>;
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
new file mode 100644
index 0000000..4ab5a77
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,14 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 8794a34..df13a3f 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -26,6 +26,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <asm/sched_clock.h>
 #include <asm/hardware/arm_timer.h>
 
 static long __init sp804_get_clock_rate(const char *name)
@@ -67,7 +68,16 @@
 	return rate;
 }
 
-void __init sp804_clocksource_init(void __iomem *base, const char *name)
+static void __iomem *sched_clock_base;
+
+static u32 sp804_read(void)
+{
+	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+}
+
+void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
+						     const char *name,
+						     int use_sched_clock)
 {
 	long rate = sp804_get_clock_rate(name);
 
@@ -83,6 +93,11 @@
 
 	clocksource_mmio_init(base + TIMER_VALUE, name,
 		rate, 200, 32, clocksource_mmio_readl_down);
+
+	if (use_sched_clock) {
+		sched_clock_base = base;
+		setup_sched_clock(sp804_read, 32, rate);
+	}
 }
 
 
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb2..0000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a4fb2e..3cd6069 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -5,6 +5,7 @@
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
 CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -12,7 +13,6 @@
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31LILLY=y
@@ -26,7 +26,6 @@
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
@@ -83,7 +82,6 @@
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
-CONFIG_FEC=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -126,6 +124,7 @@
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 6ee781b..1ebbf45 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -77,10 +77,10 @@
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MXS=m
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_DEBUG_GPIO=y
@@ -90,6 +90,20 @@
 CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=y
+CONFIG_SND_MXS_SOC=y
+CONFIG_SND_SOC_MXS_SGTL5000=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_SGTL5000=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
 CONFIG_RTC_CLASS=y
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 4384d81..2dd9d3f 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,2 +1,15 @@
-void sp804_clocksource_init(void __iomem *, const char *);
+void __sp804_clocksource_and_sched_clock_init(void __iomem *,
+					      const char *, int);
+
+static inline void sp804_clocksource_init(void __iomem *base, const char *name)
+{
+	__sp804_clocksource_and_sched_clock_init(base, name, 0);
+}
+
+static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
+							  const char *name)
+{
+	__sp804_clocksource_and_sched_clock_init(base, name, 1);
+}
+
 void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b5a5be2..90114fa 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -134,7 +134,7 @@
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 4dd0eda..1651d49 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -242,6 +242,7 @@
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5bb91bf..b2abfa1 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -180,7 +180,7 @@
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -680,6 +680,28 @@
 }
 
 /*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
+/*
  * CPU PMU identification and registration.
  */
 static int __init
@@ -730,6 +752,7 @@
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 533be99..b78af0c 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -467,23 +467,6 @@
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6933244..4d7095a 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -809,6 +809,11 @@
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3b99d82..71a21e6 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -255,11 +255,14 @@
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00..e55cdcb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,13 +102,13 @@
 	select HAVE_AT91_DBGU1
 	select AT91_SAM9G45_RESET
 
-config ARCH_AT91CAP9
-	bool "AT91CAP9"
+config ARCH_AT91SAM9X5
+	bool "AT91SAM9x5 family"
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
+	select HAVE_AT91_DBGU0
 	select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
@@ -447,21 +447,6 @@
 
 # ----------------------------------------------------------
 
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
-	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
@@ -544,7 +529,7 @@
 	depends on HAVE_AT91_DBGU0
 
 config AT91_EARLY_DBGU1
-	bool "DBGU on 9263, 9g45 and cap9"
+	bool "DBGU on 9263 and 9g45"
 	depends on HAVE_AT91_DBGU1
 
 config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fb..1b65185 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,7 @@
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -81,9 +81,6 @@
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
 
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
-
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafad..2fd051e 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
    zreladdr-y	+= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index 8967d75..0000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
-	.name		= "pioABCD_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PIOABCD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
-	.name		= "mpb0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
-	.name		= "mpb1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
-	.name		= "mpb2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
-	.name		= "mpb3_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
-	.name		= "mpb4_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
-	.name		= "can_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_CAN,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91CAP9_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
-	.name		= "aestdes_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AESTDES,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioABCD_clk,
-	&mpb0_clk,
-	&mpb1_clk,
-	&mpb2_clk,
-	&mpb3_clk,
-	&mpb4_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc0_clk,
-	&mmc1_clk,
-	&can_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ac97_clk,
-	&tcb_clk,
-	&pwm_clk,
-	&macb_clk,
-	&aestdes_clk,
-	&adc_clk,
-	&isi_clk,
-	&lcdc_clk,
-	&dma_clk,
-	&udphs_clk,
-	&ohci_clk,
-	// irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioABCD_clk),
-	CLKDEV_CON_ID("pioB", &pioABCD_clk),
-	CLKDEV_CON_ID("pioC", &pioABCD_clk),
-	CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
-	{
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOA,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOB,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOC,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOD,
-	}
-};
-
-static void at91cap9_idle(void)
-{
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-	cpu_do_idle();
-}
-
-/* --------------------------------------------------------------------
- *  AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
-	at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
-	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
-	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
-	arm_pm_idle = at91cap9_idle;
-	arm_pm_restart = at91sam9g45_restart;
-	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91cap9_gpio, 4);
-
-	/* Remember the silicon revision */
-	if (cpu_is_at91cap9_revB())
-		system_rev = 0xB;
-	else if (cpu_is_at91cap9_revC())
-		system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A, B, C and D */
-	0,	/* MP Block Peripheral 0 */
-	0,	/* MP Block Peripheral 1 */
-	0,	/* MP Block Peripheral 2 */
-	0,	/* MP Block Peripheral 3 */
-	0,	/* MP Block Peripheral 4 */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface 0 */
-	0,	/* Multimedia Card Interface 1 */
-	3,	/* CAN */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	5,	/* AC97 Controller */
-	0,	/* Timer Counter 0, 1 and 2 */
-	0,	/* Pulse Width Modulation Controller */
-	3,	/* Ethernet */
-	0,	/* Advanced Encryption Standard, Triple DES*/
-	0,	/* Analog-to-Digital Converter */
-	0,	/* Image Sensor Interface */
-	3,	/* LCD Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Device Port */
-	2,	/* USB Host port */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
-	.map_io = at91cap9_map_io,
-	.default_irq_priority = at91cap9_default_irq_priority,
-	.ioremap_registers = at91cap9_ioremap_registers,
-	.register_clocks = at91cap9_register_clocks,
-	.init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7..0000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UHP_BASE,
-		.end	= AT91CAP9_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_UHP,
-		.end	= AT91CAP9_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	if (cpu_is_at91cap9_revB())
-		irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UDPHS_FIFO,
-		.end	= AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_BASE_UDPHS,
-		.end	= AT91CAP9_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91CAP9_ID_UDPHS,
-		.end	= AT91CAP9_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] = {
-	EP("ep0", 0,   64, 1, 0, 0),
-	EP("ep1", 1, 1024, 3, 1, 1),
-	EP("ep2", 2, 1024, 3, 1, 1),
-	EP("ep3", 3, 1024, 2, 1, 1),
-	EP("ep4", 4, 1024, 2, 1, 1),
-	EP("ep5", 5, 1024, 2, 1, 0),
-	EP("ep6", 6, 1024, 2, 1, 0),
-	EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	if (cpu_is_at91cap9_revB()) {
-		irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-						  AT91_MATRIX_UDPHS_BYPASS_LOCK);
-	}
-	else
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
-	/*
-	 * Invalid pins are 0 on AT91, but the usba driver is shared
-	 * with AVR32, which use negative values instead. Once/if
-	 * gpio_is_valid() is ported to AT91, revisit this code.
-	 */
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_EMAC,
-		.end	= AT91CAP9_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_EMAC,
-		.end	= AT91CAP9_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PC25, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_MCI0,
-		.end	= AT91CAP9_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_MCI0,
-		.end	= AT91CAP9_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_mmc0_device = {
-	.name		= "at91_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_MCI1,
-		.end	= AT91CAP9_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_MCI1,
-		.end	= AT91CAP9_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_mmc1_device = {
-	.name		= "at91_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA2, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91cap9_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA16, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA17, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA18, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA19, 1);
-			at91_set_A_periph(AT91_PIN_PA20, 1);
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91cap9_mmc1_device);
-	}
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_BASE_ECC,
-		.end	= AT91CAP9_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91cap9_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PB4,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB5,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_TWI,
-		.end	= AT91CAP9_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_TWI,
-		.end	= AT91CAP9_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_B_periph(AT91_PIN_PB4, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_B_periph(AT91_PIN_PB5, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SPI0,
-		.end	= AT91CAP9_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SPI0,
-		.end	= AT91CAP9_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SPI1,
-		.end	= AT91CAP9_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SPI1,
-		.end	= AT91CAP9_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91cap9_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91cap9_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_TCB0,
-		.end	= AT91CAP9_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_TCB,
-		.end	= AT91CAP9_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91cap9_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91CAP9_BASE_RTT,
-		.end	= AT91CAP9_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
-	platform_device_register(&at91cap9_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91CAP9_BASE_WDT,
-		.end	= AT91CAP9_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91cap9_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_PWMC,
-		.end	= AT91CAP9_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_PWMC,
-		.end	= AT91CAP9_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_pwm0_device = {
-	.name	= "atmel_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_A_periph(AT91_PIN_PB19, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PA11, 1);	/* enable PWM3 */
-
-	pwm_mask = mask;
-
-	platform_device_register(&at91cap9_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_AC97C,
-		.end	= AT91CAP9_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_AC97C,
-		.end	= AT91CAP9_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PA6, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PA7, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PA9, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91cap9_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_LCDC_BASE,
-		.end	= AT91CAP9_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_LCDC,
-		.end	= AT91CAP9_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data)
-		return;
-
-	if (cpu_is_at91cap9_revB())
-		irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
-
-	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PC25, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SSC0,
-		.end	= AT91CAP9_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SSC0,
-		.end	= AT91CAP9_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB0, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB1, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SSC1,
-		.end	= AT91CAP9_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SSC1,
-		.end	= AT91CAP9_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB6, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB7, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB8, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB9, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB10, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91CAP9_ID_SSC0:
-		pdev = &at91cap9_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91CAP9_ID_SSC1:
-		pdev = &at91cap9_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_DBGU,
-		.end	= AT91CAP9_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US0,
-		.end	= AT91CAP9_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US0,
-		.end	= AT91CAP9_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA24, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA25, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US1,
-		.end	= AT91CAP9_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US1,
-		.end	= AT91CAP9_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD7, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD8, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US2,
-		.end	= AT91CAP9_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US2,
-		.end	= AT91CAP9_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD5, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91cap9_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91CAP9_ID_US0:
-			pdev = &at91cap9_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91CAP9_ID_US1:
-			pdev = &at91cap9_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91CAP9_ID_US2:
-			pdev = &at91cap9_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd..96e2adc 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dc..9be71c1 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
new file mode 100644
index 0000000..1c3444d
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -0,0 +1,373 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2010-2012 Atmel Corporation.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9x5.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+#include <mach/board.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+	.name		= "pioAB_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOAB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+	.name		= "pioCD_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOCD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk smd_clk = {
+	.name		= "smd_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SMD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* USART3 clock - Only for sam9g25/sam9x25 */
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi2_clk = {
+	.name		= "twi2_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+	.name		= "uart0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+	.name		= "uart1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PWM,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma0_clk = {
+	.name		= "dma0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma1_clk = {
+	.name		= "dma1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
+static struct clk macb0_clk = {
+	.name		= "pclk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* isi clock - Only for sam9g25 */
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* emac1 clock - Only for sam9x25 */
+static struct clk macb1_clk = {
+	.name		= "pclk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+	.name		= "ssc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* can0 clock - Only for sam9x35 */
+static struct clk can0_clk = {
+	.name		= "can0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* can1 clock - Only for sam9x35 */
+static struct clk can1_clk = {
+	.name		= "can1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioAB_clk,
+	&pioCD_clk,
+	&smd_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&twi2_clk,
+	&mmc0_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&uart0_clk,
+	&uart1_clk,
+	&tcb0_clk,
+	&pwm_clk,
+	&adc_clk,
+	&dma0_clk,
+	&dma1_clk,
+	&uhphs_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	&ssc_clk,
+	// irq0
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_ID("pioA", &pioAB_clk),
+	CLKDEV_CON_ID("pioB", &pioAB_clk),
+	CLKDEV_CON_ID("pioC", &pioCD_clk),
+	CLKDEV_CON_ID("pioD", &pioCD_clk),
+	/* additional fake clock for macb_hclk */
+	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
+	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9x5_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+
+	if (cpu_is_at91sam9g25()
+	|| cpu_is_at91sam9x25())
+		clk_register(&usart3_clk);
+
+	if (cpu_is_at91sam9g25()
+	|| cpu_is_at91sam9x25()
+	|| cpu_is_at91sam9g35()
+	|| cpu_is_at91sam9x35())
+		clk_register(&macb0_clk);
+
+	if (cpu_is_at91sam9g15()
+	|| cpu_is_at91sam9g35()
+	|| cpu_is_at91sam9x35())
+		clk_register(&lcdc_clk);
+
+	if (cpu_is_at91sam9g25())
+		clk_register(&isi_clk);
+
+	if (cpu_is_at91sam9x25())
+		clk_register(&macb1_clk);
+
+	if (cpu_is_at91sam9x25()
+	|| cpu_is_at91sam9x35()) {
+		clk_register(&can0_clk);
+		clk_register(&can1_clk);
+	}
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9x5 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init at91sam9x5_map_io(void)
+{
+	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
+}
+
+static void __init at91sam9x5_ioremap_registers(void)
+{
+	if (of_at91sam926x_pit_init() < 0)
+		panic("Impossible to find PIT\n");
+}
+
+void __init at91sam9x5_initialize(void)
+{
+	arm_pm_restart = at91sam9g45_restart;
+	at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
+
+	/* Register GPIO subsystem (using DT) */
+	at91_gpio_init(NULL, 0);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9x5 devices (temporary before modification of code)
+ * -------------------------------------------------------------------- */
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+struct platform_device *atmel_default_console_device = NULL;
+
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A and B */
+	1,	/* Parallel IO Controller C and D */
+	4,	/* Soft Modem */
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	6,	/* Two-Wire Interface 2 */
+	0,	/* Multimedia Card Interface 0 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	5,	/* UART 0 */
+	5,	/* UART 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* ADC Controller */
+	0,	/* DMA Controller 0 */
+	0,	/* DMA Controller 1 */
+	2,	/* USB Host High Speed port */
+	2,	/* USB Device High speed port */
+	3,	/* Ethernet MAC 0 */
+	3,	/* LDC Controller or Image Sensor Interface */
+	0,	/* Multimedia Card Interface 1 */
+	3,	/* Ethernet MAC 1 */
+	4,	/* Synchronous Serial Interface */
+	4,	/* CAN Controller 0 */
+	4,	/* CAN Controller 1 */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+struct at91_init_soc __initdata at91sam9x5_soc = {
+	.map_io = at91sam9x5_map_io,
+	.default_irq_priority = at91sam9x5_default_irq_priority,
+	.ioremap_registers = at91sam9x5_ioremap_registers,
+	.register_clocks = at91sam9x5_register_clocks,
+	.init = at91sam9x5_initialize,
+};
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
deleted file mode 100644
index ac3de4f..0000000
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cap9adk.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cap9adk_init_early(void)
-{
-	/* Initialize processor: 12 MHz crystal */
-	at91_initialize(12000000);
-
-	/* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
-	at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
-	/* ... POWER LED always on */
-	at91_set_gpio_output(AT91_PIN_PC29, 1);
-
-	/* Setup the serial ports and console */
-	at91_register_uart(0, 0, 0);		/* DBGU = ttyS0 */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cap9adk_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
-	.vbus_pin	= AT91_PIN_PB31,
-};
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PC4);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init cap9adk_add_device_ts(void)
-{
-	at91_set_gpio_input(AT91_PIN_PC4, 1);	/* Touchscreen PENIRQ */
-	at91_set_gpio_input(AT91_PIN_PC5, 1);	/* Touchscreen BUSY */
-}
-#else
-static void __init cap9adk_add_device_ts(void) {}
-#endif
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info cap9adk_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 3,		/* can be 2 or 3, depending on J2 jumper */
-		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= AT91_PIN_PC4,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cap9adk_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cap9adk_macb_data = {
-	.phy_irq_pin	= -EINVAL,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
-	{
-		.name	= "NAND partition",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata cap9adk_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= -EINVAL,
-	.enable_pin	= AT91_PIN_PD15,
-	.parts		= cap9adk_nand_partitions,
-	.num_parts	= ARRAY_SIZE(cap9adk_nand_partitions),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
-	.ncs_read_setup		= 1,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 6,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 6,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 8,
-	.write_cycle		= 8,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 1,
-};
-
-static void __init cap9adk_add_device_nand(void)
-{
-	unsigned long csa;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (cap9adk_nand_data.bus_width_16)
-		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
-
-	at91_add_device_nand(&cap9adk_nand_data);
-}
-
-
-/*
- * NOR flash
- */
-static struct mtd_partition cap9adk_nor_partitions[] = {
-	{
-		.name		= "NOR partition",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cap9adk_nor_data = {
-	.width		= 2,
-	.parts		= cap9adk_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(cap9adk_nor_partitions),
-};
-
-#define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	SZ_8M
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= NOR_BASE,
-		.end	= NOR_BASE + NOR_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device cap9adk_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &cap9adk_nor_data,
-	},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
-	.ncs_read_setup		= 2,
-	.nrd_setup		= 4,
-	.ncs_write_setup	= 2,
-	.nwe_setup		= 4,
-
-	.ncs_read_pulse		= 10,
-	.nrd_pulse		= 8,
-	.ncs_write_pulse	= 10,
-	.nwe_pulse		= 8,
-
-	.read_cycle		= 16,
-	.write_cycle		= 16,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
-	.tdf_cycles		= 1,
-};
-
-static __init void cap9adk_add_device_nor(void)
-{
-	unsigned long csa;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	/* configure chip-select 0 (NOR) */
-	sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
-
-	platform_device_register(&cap9adk_nor_flash);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-	        .name           = "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(4965),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91CAP9_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PC0, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PC0, 1);	/* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91CAP9_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data cap9adk_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-static void __init cap9adk_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&cap9adk_usbh_data);
-	/* USB HS */
-	at91_add_device_usba(&cap9adk_usba_udc_data);
-	/* SPI */
-	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
-	/* Touchscreen */
-	cap9adk_add_device_ts();
-	/* MMC */
-	at91_add_device_mmc(1, &cap9adk_mmc_data);
-	/* Ethernet */
-	at91_add_device_eth(&cap9adk_macb_data);
-	/* NAND */
-	cap9adk_add_device_nand();
-	/* NOR Flash */
-	cap9adk_add_device_nor();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* LCD Controller */
-	at91_add_device_lcdc(&cap9adk_lcdc_data);
-	/* AC97 */
-	at91_add_device_ac97(&cap9adk_ac97_data);
-}
-
-MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
-	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= cap9adk_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= cap9adk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index bb6b434..0579315 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -109,6 +109,7 @@
 
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9m10g45ek",
+	"atmel,at91sam9x5ek",
 	"calao,usb-a9g20",
 	NULL
 };
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 61873f3..a5291e0 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,26 +47,38 @@
 /*
  * Chips have some kind of clocks : group them by functionality
  */
-#define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45())
+#define cpu_has_utmi()		(  cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
-				|| cpu_is_at91sam9g45())
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45()))
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5()))
 
-#define cpu_has_upll()		(cpu_is_at91sam9g45())
+#define cpu_has_upll()		(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
 #define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45()))
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5()))
+
+#define cpu_has_plladiv2()	(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
+
+#define cpu_has_mdiv3()		(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
+
+#define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5())
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -139,13 +151,6 @@
 {
 	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
 
-	if (cpu_is_at91sam9g45()) {
-		if (is_on)
-			uckr |= AT91_PMC_BIASEN;
-		else
-			uckr &= ~AT91_PMC_BIASEN;
-	}
-
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
 		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -210,11 +215,24 @@
 				return &utmi_clk;
 			else if (cpu_has_pllb())
 				return &pllb;
+			break;
+		/* alternate PMC: can use master clock */
+		case AT91_PMC_CSS_MASTER:
+			return &mck;
 	}
 
 	return NULL;
 }
 
+static int pmc_prescaler_divider(u32 reg)
+{
+	if (cpu_has_alt_prescaler()) {
+		return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET);
+	} else {
+		return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET);
+	}
+}
+
 static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
@@ -316,12 +334,22 @@
 {
 	unsigned long	flags;
 	unsigned	prescale;
+	unsigned long	prescale_offset, css_mask;
 	unsigned long	actual;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	if (clk->users)
 		return -EBUSY;
+
+	if (cpu_has_alt_prescaler()) {
+		prescale_offset = PMC_ALT_PRES_OFFSET;
+		css_mask = AT91_PMC_ALT_PCKR_CSS;
+	} else {
+		prescale_offset = PMC_PRES_OFFSET;
+		css_mask = AT91_PMC_CSS;
+	}
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	actual = clk->parent->rate_hz;
@@ -330,8 +358,8 @@
 			u32	pckr;
 
 			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS;	/* clock selection */
-			pckr |= prescale << 2;
+			pckr &= css_mask;	/* keep clock selection */
+			pckr |= prescale << prescale_offset;
 			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
 			break;
@@ -378,11 +406,17 @@
 {
 	struct clk	*parent;
 	u32		pckr;
+	unsigned int	css_mask;
+
+	if (cpu_has_alt_prescaler())
+		css_mask = AT91_PMC_ALT_PCKR_CSS;
+	else
+		css_mask = AT91_PMC_CSS;
 
 	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+	parent = at91_css_to_clk(pckr & css_mask);
 	clk->parent = parent;
-	clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2));
+	clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
 }
 
 #endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
@@ -602,8 +636,6 @@
 		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -666,7 +698,7 @@
 	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	if (cpu_is_at91sam9g45()) {
+	if (cpu_has_plladiv2()) {
 		mckr = at91_sys_read(AT91_PMC_MCKR);
 		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
 	}
@@ -688,6 +720,10 @@
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+
+		/* UTMI bias and PLL are managed at the same time */
+		if (cpu_has_upll())
+			utmi_clk.pmc_mask |= AT91_PMC_BIASEN;
 	}
 
 	/*
@@ -706,7 +742,7 @@
 	mckr = at91_sys_read(AT91_PMC_MCKR);
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
-	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
+	freq /= pmc_prescaler_divider(mckr);					/* prescale */
 	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else if (cpu_is_at91sam9g20()) {
@@ -714,13 +750,19 @@
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else if (cpu_is_at91sam9g45()) {
+	} else if (cpu_has_mdiv3()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
 			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));		/* mdiv */
 	}
 
+	if (cpu_has_alt_prescaler()) {
+		/* Programmable clocks can use MCK */
+		mck.type |= CLK_TYPE_PRIMARY;
+		mck.id = 4;
+	}
+
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		at91_clk_add(standard_pmc_clocks[i]);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 5941334..7e8280e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -45,7 +45,6 @@
 extern void __init at91sam9263_set_console_clock(int id);
 extern void __init at91sam9rl_set_console_clock(int id);
 extern void __init at91sam9g45_set_console_clock(int id);
-extern void __init at91cap9_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
 #else
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e..f9fdbbe 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,10 +23,8 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
 #define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
 #define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
@@ -40,16 +38,20 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
+#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
+#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
+#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
 
 #define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
 #define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
@@ -74,20 +76,30 @@
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
 #define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
+#define		PMC_PRES_OFFSET		2
+#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
+#define		PMC_ALT_PRES_OFFSET	4
+#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
+#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
 #define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
 #define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
 #define			AT91RM9200_PMC_MDIV_2		(1 << 8)
 #define			AT91RM9200_PMC_MDIV_3		(2 << 8)
 #define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
 #define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
@@ -105,7 +117,14 @@
 #define			AT91_PMC_USBS_UPLL		(1 << 0)
 #define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
 
+#define	AT91_PMC_SMD		(AT91_PMC + 0x3c)	/* Soft Modem Clock Register [some SAM9 only] */
+#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
+#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
+#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
+
 #define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
+#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
 #define			AT91_PMC_CSSMCK_CSS		(0 << 8)
 #define			AT91_PMC_CSSMCK_MCK		(1 << 8)
@@ -117,17 +136,30 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
-#define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
+#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
 #define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
 
-#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
-#define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
+#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Write Protect Mode Register [some SAM9] */
+#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
+#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
+#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
 
-#define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
+#define AT91_PMC_WPSR		(AT91_PMC + 0xe8)	/* Write Protect Status Register [some SAM9] */
+#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
+#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
+
+#define AT91_PMC_PCR		(AT91_PMC + 0x10c)	/* Peripheral Control Register [some SAM9] */
+#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
+#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command */
+#define		AT91_PMC_PCR_DIV	(0x3  <<  16)		/* Divisor Value */
+#define		AT91_PMC_PCRDIV(n)	(((n) <<  16) & AT91_PMC_PCR_DIV)
+#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
deleted file mode 100644
index 61d9529..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0		8	/* USART 0 */
-#define AT91CAP9_ID_US1		9	/* USART 1 */
-#define AT91CAP9_ID_US2		10	/* USART 2 */
-#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN		13	/* CAN */
-#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
-#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC	22	/* Ethernet */
-#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
-#define AT91CAP9_ID_DMA		27	/* DMA Controller */
-#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP		29	/* USB Host Port */
-#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS		0xfff78000
-#define AT91CAP9_BASE_TCB0		0xfff7c000
-#define AT91CAP9_BASE_TC0		0xfff7c000
-#define AT91CAP9_BASE_TC1		0xfff7c040
-#define AT91CAP9_BASE_TC2		0xfff7c080
-#define AT91CAP9_BASE_MCI0		0xfff80000
-#define AT91CAP9_BASE_MCI1		0xfff84000
-#define AT91CAP9_BASE_TWI		0xfff88000
-#define AT91CAP9_BASE_US0		0xfff8c000
-#define AT91CAP9_BASE_US1		0xfff90000
-#define AT91CAP9_BASE_US2		0xfff94000
-#define AT91CAP9_BASE_SSC0		0xfff98000
-#define AT91CAP9_BASE_SSC1		0xfff9c000
-#define AT91CAP9_BASE_AC97C		0xfffa0000
-#define AT91CAP9_BASE_SPI0		0xfffa4000
-#define AT91CAP9_BASE_SPI1		0xfffa8000
-#define AT91CAP9_BASE_CAN		0xfffac000
-#define AT91CAP9_BASE_PWMC		0xfffb8000
-#define AT91CAP9_BASE_EMAC		0xfffbc000
-#define AT91CAP9_BASE_ADC		0xfffc0000
-#define AT91CAP9_BASE_ISI		0xfffc4000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
-			(0xfffffd50 - AT91_BASE_SYS) :	\
-			(0xfffffd60 - AT91_BASE_SYS))
-
-#define AT91CAP9_BASE_ECC	0xffffe200
-#define AT91CAP9_BASE_DMA	0xffffec00
-#define AT91CAP9_BASE_SMC	0xffffe800
-#define AT91CAP9_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91CAP9_BASE_PIOA	0xfffff200
-#define AT91CAP9_BASE_PIOB	0xfffff400
-#define AT91CAP9_BASE_PIOC	0xfffff600
-#define AT91CAP9_BASE_PIOD	0xfffff800
-#define AT91CAP9_BASE_RSTC	0xfffffd00
-#define AT91CAP9_BASE_SHDWC	0xfffffd10
-#define AT91CAP9_BASE_RTT	0xfffffd20
-#define AT91CAP9_BASE_PIT	0xfffffd30
-#define AT91CAP9_BASE_WDT	0xfffffd40
-
-#define AT91_USART0	AT91CAP9_BASE_US0
-#define AT91_USART1	AT91CAP9_BASE_US1
-#define AT91_USART2	AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
deleted file mode 100644
index 4b9d4af..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
-#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
-#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
-#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index e2f8da8..5d4a9f8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -59,7 +59,6 @@
 #define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
 #define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
 #define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91CAP9_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
@@ -76,7 +75,6 @@
 #define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
 
 #define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
-#define AT91CAP9_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -94,11 +92,9 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define AT91CAP9_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91CAP9_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 #define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
@@ -106,16 +102,10 @@
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
 
 #define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
-#define AT91CAP9_DDRSDRC_DLL	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91CAP9_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91CAP9_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91CAP9_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
 #define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91CAP9_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91CAP9_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
 #define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
 #define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
new file mode 100644
index 0000000..8476871
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -0,0 +1,80 @@
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9x5 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_H
+#define AT91SAM9X5_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9X5_ID_PIOAB	2	/* Parallel I/O Controller A and B */
+#define AT91SAM9X5_ID_PIOCD	3	/* Parallel I/O Controller C and D */
+#define AT91SAM9X5_ID_SMD	4	/* SMD Soft Modem (SMD) */
+#define AT91SAM9X5_ID_USART0	5	/* USART 0 */
+#define AT91SAM9X5_ID_USART1	6	/* USART 1 */
+#define AT91SAM9X5_ID_USART2	7	/* USART 2 */
+#define AT91SAM9X5_ID_USART3	8	/* USART 3 */
+#define AT91SAM9X5_ID_TWI0	9	/* Two-Wire Interface 0 */
+#define AT91SAM9X5_ID_TWI1	10	/* Two-Wire Interface 1 */
+#define AT91SAM9X5_ID_TWI2	11	/* Two-Wire Interface 2 */
+#define AT91SAM9X5_ID_MCI0	12	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9X5_ID_SPI0	13	/* Serial Peripheral Interface 0 */
+#define AT91SAM9X5_ID_SPI1	14	/* Serial Peripheral Interface 1 */
+#define AT91SAM9X5_ID_UART0	15	/* UART 0 */
+#define AT91SAM9X5_ID_UART1	16	/* UART 1 */
+#define AT91SAM9X5_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9X5_ID_PWM	18	/* Pulse Width Modulation Controller */
+#define AT91SAM9X5_ID_ADC	19	/* ADC Controller */
+#define AT91SAM9X5_ID_DMA0	20	/* DMA Controller 0 */
+#define AT91SAM9X5_ID_DMA1	21	/* DMA Controller 1 */
+#define AT91SAM9X5_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9X5_ID_UDPHS	23	/* USB Device High Speed */
+#define AT91SAM9X5_ID_EMAC0	24	/* Ethernet MAC0 */
+#define AT91SAM9X5_ID_LCDC	25	/* LCD Controller */
+#define AT91SAM9X5_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9X5_ID_MCI1	26	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9X5_ID_EMAC1	27	/* Ethernet MAC1 */
+#define AT91SAM9X5_ID_SSC	28	/* Synchronous Serial Controller */
+#define AT91SAM9X5_ID_CAN0	29	/* CAN Controller 0 */
+#define AT91SAM9X5_ID_CAN1	30	/* CAN Controller 1 */
+#define AT91SAM9X5_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9X5_BASE_USART0	0xf801c000
+#define AT91SAM9X5_BASE_USART1	0xf8020000
+#define AT91SAM9X5_BASE_USART2	0xf8024000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DDRSDRC0	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+
+/*
+ * Base addresses for early serial code (uncompress.h)
+ */
+#define AT91_DBGU	AT91_BASE_DBGU0
+#define AT91_USART0	AT91SAM9X5_BASE_USART0
+#define AT91_USART1	AT91SAM9X5_BASE_USART1
+#define AT91_USART2	AT91SAM9X5_BASE_USART2
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9X5_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
+
+#define AT91SAM9X5_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9X5_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
new file mode 100644
index 0000000..a606d39
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_MATRIX_H
+#define AT91SAM9X5_MATRIX_H
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
+#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
+#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
+#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
+#define			AT91_MATRIX_MP_OFF			(0 << 25)
+#define			AT91_MATRIX_MP_ON			(1 << 25)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index f6ce936..0118c33 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,7 +25,6 @@
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91SAM9X5	0x819a05a0
-#define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
@@ -51,10 +50,6 @@
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
 
-/* PMC revision */
-#define ARCH_REVISION_CAP9_B	0x399
-#define ARCH_REVISION_CAP9_C	0x601
-
 /* RM9200 type */
 #define ARCH_REVISON_9200_BGA	(0 << 0)
 #define ARCH_REVISON_9200_PQFP	(1 << 0)
@@ -63,9 +58,6 @@
 	/* 920T */
 	AT91_SOC_RM9200,
 
-	/* CAP */
-	AT91_SOC_CAP9,
-
 	/* SAM92xx */
 	AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
 
@@ -86,9 +78,6 @@
 	/* RM9200 */
 	AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
 
-	/* CAP9 */
-	AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
-
 	/* SAM9260 */
 	AT91_SOC_SAM9XE,
 
@@ -195,16 +184,6 @@
 #define cpu_is_at91sam9x25()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9()	(at91_soc_initdata.type == AT91_SOC_CAP9)
-#define cpu_is_at91cap9_revB()	(at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
-#define cpu_is_at91cap9_revC()	(at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
-#else
-#define cpu_is_at91cap9()	(0)
-#define cpu_is_at91cap9_revB()	(0)
-#define cpu_is_at91cap9_revC()	(0)
-#endif
-
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 2d0e4e9..fd7dce4 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,7 +19,7 @@
 /* DBGU base */
 /* rm9200, 9260/9g20, 9261/9g10, 9rl */
 #define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45, cap9 */
+/* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
 #if defined(CONFIG_ARCH_AT91RM9200)
@@ -34,8 +34,8 @@
 #include <mach/at91sam9rl.h>
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91SAM9X5)
+#include <mach/at91sam9x5.h>
 #elif defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
 #else
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379..87be5aa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -150,11 +150,6 @@
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91cap9()) {
-		if ((scsr & AT91CAP9_PMC_UHP) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 7eb40d2..218d816 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -24,24 +24,6 @@
 #define wait_for_interrupt_enable()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
 								: : "r" (0))
 
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91sam9_ddrsdr.h>
-
-
-static inline u32 sdram_selfrefresh_enable(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-	return saved_lpr;
-}
-
-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
-#define wait_for_interrupt_enable()		cpu_do_idle()
-
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9_ddrsdr.h>
 
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 92dfb84..f8539a8 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,8 +18,7 @@
 
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
@@ -130,8 +129,7 @@
 	/* Put SDRAM in self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
 
 	/* prepare for DDRAM self-refresh mode */
 	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
@@ -263,8 +261,7 @@
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
 	str	r3, [r2, #AT91_DDRSDRC_LPR]
@@ -305,8 +302,7 @@
 #ifdef CONFIG_ARCH_AT91RM9200
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
 #else
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 69d3fc4..620c67e 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -86,20 +86,6 @@
 	socid = cidr & ~AT91_CIDR_VERSION;
 
 	switch (socid) {
-	case ARCH_ID_AT91CAP9: {
-#ifdef CONFIG_AT91_PMC_UNIT
-		u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
-
-		if (pmc_ver == ARCH_REVISION_CAP9_B)
-			at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
-		else if (pmc_ver == ARCH_REVISION_CAP9_C)
-			at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
-#endif
-		at91_soc_initdata.type = AT91_SOC_CAP9;
-		at91_boot_soc = at91cap9_soc;
-		break;
-	}
-
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
 		at91_boot_soc = at91rm9200_soc;
@@ -200,7 +186,6 @@
 
 static const char *soc_name[] = {
 	[AT91_SOC_RM9200]	= "at91rm9200",
-	[AT91_SOC_CAP9]		= "at91cap9",
 	[AT91_SOC_SAM9260]	= "at91sam9260",
 	[AT91_SOC_SAM9261]	= "at91sam9261",
 	[AT91_SOC_SAM9263]	= "at91sam9263",
@@ -221,8 +206,6 @@
 static const char *soc_subtype_name[] = {
 	[AT91_SOC_RM9200_BGA]	= "at91rm9200 BGA",
 	[AT91_SOC_RM9200_PQFP]	= "at91rm9200 PQFP",
-	[AT91_SOC_CAP9_REV_B]	= "at91cap9 revB",
-	[AT91_SOC_CAP9_REV_C]	= "at91cap9 revC",
 	[AT91_SOC_SAM9XE]	= "at91sam9xe",
 	[AT91_SOC_SAM9G45ES]	= "at91sam9g45es",
 	[AT91_SOC_SAM9M10]	= "at91sam9m10",
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 4588ae6..5db4aa4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -13,7 +13,6 @@
 };
 
 extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91cap9_soc;
 extern struct at91_init_soc at91rm9200_soc;
 extern struct at91_init_soc at91sam9260_soc;
 extern struct at91_init_soc at91sam9261_soc;
@@ -27,10 +26,6 @@
 	return at91_boot_soc.init != NULL;
 }
 
-#if !defined(CONFIG_ARCH_AT91CAP9)
-#define at91cap9_soc	at91_boot_soc
-#endif
-
 #if !defined(CONFIG_ARCH_AT91RM9200)
 #define at91rm9200_soc	at91_boot_soc
 #endif
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d5fb44f..d67d0b4 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 31b59e6..060dde7 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -471,6 +471,11 @@
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
+		.name		= "jpeg",
+		.id		= 0,
+		.enable		= exynos4_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
 		.name		= "fimc",
 		.devname	= "exynos4-fimc.0",
 		.enable		= exynos4_clk_ip_cam_ctrl,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 34e8190..519ef0e 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,10 +26,12 @@
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/cacheflush.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
+#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
@@ -45,6 +47,8 @@
 #include <plat/regs-serial.h>
 
 #include "common.h"
+#define L2_AUX_VAL 0x7C470001
+#define L2_AUX_MASK 0xC200ffff
 
 static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
@@ -173,7 +177,12 @@
 	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_4K,
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC1,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC1),
+		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
@@ -433,23 +442,48 @@
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
-	/* TAG, Data Latency Control: 2cycle */
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+	int ret;
+	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+	if (!ret) {
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+		return 0;
+	}
 
-	if (soc_is_exynos4210())
-		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
+		l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
+		/* TAG, Data Latency Control: 2 cycles */
+		l2x0_saved_regs.tag_latency = 0x110;
 
-	/* L2X0 Prefetch Control */
-	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+		if (soc_is_exynos4212() || soc_is_exynos4412())
+			l2x0_saved_regs.data_latency = 0x120;
+		else
+			l2x0_saved_regs.data_latency = 0x110;
 
-	/* L2X0 Power Control */
-	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+		l2x0_saved_regs.prefetch_ctrl = 0x30000007;
+		l2x0_saved_regs.pwr_ctrl =
+			(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
 
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
 
+		__raw_writel(l2x0_saved_regs.tag_latency,
+				S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+		__raw_writel(l2x0_saved_regs.data_latency,
+				S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+		/* L2X0 Prefetch Control */
+		__raw_writel(l2x0_saved_regs.prefetch_ctrl,
+				S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+		/* L2X0 Power Control */
+		__raw_writel(l2x0_saved_regs.pwr_ctrl,
+				S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+		clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
+	}
+
+	l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
 	return 0;
 }
 
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 4ebb382..33ab4e7 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -11,25 +11,53 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/time.h>
 
 #include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <asm/unified.h>
+#include <mach/regs-pmu.h>
+#include <mach/pmu.h>
+
+#include <plat/cpu.h>
+
+#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
+#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
+
+#define S5P_CHECK_AFTR		0xFCBA0D10
 
 static int exynos4_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			      int index);
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index);
 
-static struct cpuidle_state exynos4_cpuidle_set[] = {
+static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
 	[0] = {
 		.enter			= exynos4_enter_idle,
 		.exit_latency		= 1,
 		.target_residency	= 100000,
 		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IDLE",
+		.name			= "C0",
 		.desc			= "ARM clock gating(WFI)",
 	},
+	[1] = {
+		.enter			= exynos4_enter_lowpower,
+		.exit_latency		= 300,
+		.target_residency	= 100000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "C1",
+		.desc			= "ARM power down",
+	},
 };
 
 static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
@@ -39,9 +67,102 @@
 	.owner		= THIS_MODULE,
 };
 
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos4_set_wakeupmask(void)
+{
+	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
+}
+
+static unsigned int g_pwr_ctrl, g_diag_reg;
+
+static void save_cpu_arch_register(void)
+{
+	/*read power control register*/
+	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
+	/*read diagnostic register*/
+	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
+	return;
+}
+
+static void restore_cpu_arch_register(void)
+{
+	/*write power control register*/
+	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
+	/*write diagnostic register*/
+	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
+	return;
+}
+
+static int idle_finisher(unsigned long flags)
+{
+	cpu_do_idle();
+	return 1;
+}
+
+static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	struct timeval before, after;
+	int idle_time;
+	unsigned long tmp;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	exynos4_set_wakeupmask();
+
+	/* Set value of power down register for aftr mode */
+	exynos4_sys_powerdown_conf(SYS_AFTR);
+
+	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
+	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
+
+	save_cpu_arch_register();
+
+	/* Setting Central Sequence Register for power down mode */
+	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+	cpu_pm_enter();
+	cpu_suspend(0, idle_finisher);
+
+#ifdef CONFIG_SMP
+	scu_enable(S5P_VA_SCU);
+#endif
+	cpu_pm_exit();
+
+	restore_cpu_arch_register();
+
+	/*
+	 * If PMU failed while entering sleep mode, WFI will be
+	 * ignored by PMU and then exiting cpu_do_idle().
+	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+	 * in this situation.
+	 */
+	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+		tmp |= S5P_CENTRAL_LOWPWR_CFG;
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+	}
+
+	/* Clear wakeup state register */
+	__raw_writel(0x0, S5P_WAKEUP_STAT);
+
+	do_gettimeofday(&after);
+
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+		    (after.tv_usec - before.tv_usec);
+
+	dev->last_residency = idle_time;
+	return index;
+}
+
 static int exynos4_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
-			      int index)
+				int index)
 {
 	struct timeval before, after;
 	int idle_time;
@@ -60,6 +181,22 @@
 	return index;
 }
 
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	int new_index = index;
+
+	/* This mode only can be entered when other core's are offline */
+	if (num_online_cpus() > 1)
+		new_index = drv->safe_state_index;
+
+	if (new_index == 0)
+		return exynos4_enter_idle(dev, drv, new_index);
+	else
+		return exynos4_enter_core0_aftr(dev, drv, new_index);
+}
+
 static int __init exynos4_init_cpuidle(void)
 {
 	int i, max_cpuidle_state, cpu_id;
@@ -74,19 +211,25 @@
 		memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
 				sizeof(struct cpuidle_state));
 	}
+	drv->safe_state_index = 0;
 	cpuidle_register_driver(&exynos4_idle_driver);
 
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
 		device->cpu = cpu_id;
 
-		device->state_count = drv->state_count;
+		if (cpu_id == 0)
+			device->state_count = (sizeof(exynos4_cpuidle_set) /
+					       sizeof(struct cpuidle_state));
+		else
+			device->state_count = 1;	/* Support IDLE only */
 
 		if (cpuidle_register_device(device)) {
 			printk(KERN_ERR "CPUidle register device failed\n,");
 			return -EIO;
 		}
 	}
+
 	return 0;
 }
 device_initcall(exynos4_init_cpuidle);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c754a22..a8cd65f 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -31,6 +31,10 @@
 #define EXYNOS4_PA_FIMC2		0x11820000
 #define EXYNOS4_PA_FIMC3		0x11830000
 
+#define EXYNOS4_PA_JPEG			0x11840000
+
+#define EXYNOS4_PA_G2D			0x12800000
+
 #define EXYNOS4_PA_I2S0			0x03830000
 #define EXYNOS4_PA_I2S1			0xE3100000
 #define EXYNOS4_PA_I2S2			0xE2A00000
@@ -57,6 +61,7 @@
 #define EXYNOS4_PA_KEYPAD		0x100A0000
 
 #define EXYNOS4_PA_DMC0			0x10400000
+#define EXYNOS4_PA_DMC1			0x10410000
 
 #define EXYNOS4_PA_COMBINER		0x10440000
 
@@ -162,6 +167,8 @@
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
 #define S5P_PA_FIMC2			EXYNOS4_PA_FIMC2
 #define S5P_PA_FIMC3			EXYNOS4_PA_FIMC3
+#define S5P_PA_JPEG			EXYNOS4_PA_JPEG
+#define S5P_PA_G2D			EXYNOS4_PA_G2D
 #define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
 #define S5P_PA_HDMI			EXYNOS4_PA_HDMI
 #define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
index 632dd56..e76b7fa 100644
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ b/arch/arm/mach-exynos/include/mach/pmu.h
@@ -22,11 +22,13 @@
 	NUM_SYS_POWERDOWN,
 };
 
+extern unsigned long l2x0_regs_phys;
 struct exynos4_pmu_conf {
 	void __iomem *reg;
 	unsigned int val[NUM_SYS_POWERDOWN];
 };
 
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
 
 #endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index e00d8e2..5ca91ec 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 85b5527..3e894ba 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -29,12 +29,13 @@
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+#define TICK_BASE_CNT	1
+
 enum {
 	MCT_INT_SPI,
 	MCT_INT_PPI
 };
 
-static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
 static unsigned int mct_int_type;
 
@@ -205,11 +206,14 @@
 static void exynos4_comp_set_mode(enum clock_event_mode mode,
 				  struct clock_event_device *evt)
 {
+	unsigned long cycles_per_jiffy;
 	exynos4_mct_comp0_stop();
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -248,9 +252,7 @@
 
 static void exynos4_clockevent_init(void)
 {
-	clk_cnt_per_tick = clk_rate / 2	/ HZ;
-
-	clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
+	clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
 	mct_comp_device.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &mct_comp_device);
 	mct_comp_device.min_delta_ns =
@@ -314,12 +316,15 @@
 					 struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	unsigned long cycles_per_jiffy;
 
 	exynos4_mct_tick_stop(mevt);
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -393,7 +398,7 @@
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
 
-	clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
+	clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
 	evt->max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, evt);
 	evt->min_delta_ns =
@@ -401,7 +406,7 @@
 
 	clockevents_register_device(evt);
 
-	exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
+	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index f105bd2..428cfeb 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -155,13 +155,6 @@
 	SAVE_ITEM(S5P_SROM_BC3),
 };
 
-static struct sleep_save exynos4_l2cc_save[] = {
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
-};
 
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
@@ -182,7 +175,6 @@
 	u32 tmp;
 
 	s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-	s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
 	s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
 	s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
 
@@ -388,13 +380,6 @@
 	scu_enable(S5P_VA_SCU);
 #endif
 
-#ifdef CONFIG_CACHE_L2X0
-	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
-	outer_inv_all();
-	/* enable L2X0*/
-	writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
-#endif
-
 early_wakeup:
 	return;
 }
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8394d51..a96183e 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -109,7 +109,7 @@
 
 	highbank_clocks_init();
 
-	sp804_clocksource_init(timer_base + 0x20, "timer1");
+	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
 }
 
diff --git a/arch/arm/mach-highbank/include/mach/memory.h b/arch/arm/mach-highbank/include/mach/memory.h
deleted file mode 100644
index 40a8c17..0000000
--- a/arch/arm/mach-highbank/include/mach/memory.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 55db9c4..f4b6fb0 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -8,8 +8,8 @@
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
 
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
 
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index 5e2e7a8..aa15c51 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -149,39 +149,3 @@
 	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx50_revision);
-
-static int __init post_cpu_init(void)
-{
-	unsigned int reg;
-	void __iomem *base;
-
-	if (cpu_is_mx51() || cpu_is_mx53()) {
-		if (cpu_is_mx51())
-			base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
-		else
-			base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
-
-		__raw_writel(0x0, base + 0x40);
-		__raw_writel(0x0, base + 0x44);
-		__raw_writel(0x0, base + 0x48);
-		__raw_writel(0x0, base + 0x4C);
-		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-		__raw_writel(reg, base + 0x50);
-
-		if (cpu_is_mx51())
-			base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
-		else
-			base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
-
-		__raw_writel(0x0, base + 0x40);
-		__raw_writel(0x0, base + 0x44);
-		__raw_writel(0x0, base + 0x48);
-		__raw_writel(0x0, base + 0x4C);
-		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-		__raw_writel(reg, base + 0x50);
-	}
-
-	return 0;
-}
-
-postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-imx/crmregs-imx31.h b/arch/arm/mach-imx/crmregs-imx31.h
index 37a8a07..9a34d39 100644
--- a/arch/arm/mach-imx/crmregs-imx31.h
+++ b/arch/arm/mach-imx/crmregs-imx31.h
@@ -64,6 +64,7 @@
 #define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
 #define MXC_CCM_CCMR_LPM_OFFSET                 14
 #define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_LPM_WAIT_MX35		(0x1 << 14)
 #define MXC_CCM_CCMR_FIRS_OFFSET                11
 #define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
 #define MXC_CCM_CCMR_UPE                        (1 << 9)
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 8404ee7..2215814 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,6 +34,8 @@
 {
 	unsigned long reg = 0;
 
+	mx3_cpu_lp_set(MX3_WAIT);
+
 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
@@ -173,6 +175,9 @@
 	}
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+
+	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
+	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -257,5 +262,9 @@
 	}
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+
+	/* Setup AIPS registers */
+	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
+	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
 }
 #endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 49549a7..92efece 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -185,6 +185,10 @@
 
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
+
+	/* Setup AIPS registers */
+	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
+	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
 }
 
 void __init imx53_soc_init(void)
@@ -200,4 +204,8 @@
 
 	/* i.mx53 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
+
+	/* Setup AIPS registers */
+	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
+	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
 }
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
new file mode 100644
index 0000000..b375243
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -0,0 +1,37 @@
+/*
+ *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/io.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include "crmregs-imx3.h"
+
+/*
+ * Set cpu low power mode before WFI instruction. This function is called
+ * mx3 because it can be used for mx31 and mx35.
+ * Currently only WAIT_MODE is supported.
+ */
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
+{
+	int reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+
+	switch (mode) {
+	case MX3_WAIT:
+		if (cpu_is_mx35())
+			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
+		__raw_writel(reg, MXC_CCM_CCMR);
+		break;
+	default:
+		pr_err("Unknown cpu power mode: %d\n", mode);
+		return;
+	}
+}
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index e12e112..293958b 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -223,7 +223,6 @@
 {
 	u32 reg, bm_busy, div_max, d, f, div, frac;
 	unsigned long diff, parent_rate, calc_rate;
-	int i;
 
 	parent_rate = clk_get_rate(clk->parent);
 
@@ -275,14 +274,7 @@
 	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
 
-	for (i = 10000; i; i--)
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
-					HW_CLKCTRL_CPU) & bm_busy))
-			break;
-	if (!i)	{
-		pr_err("%s: divider writing timeout\n", __func__);
-		return -ETIMEDOUT;
-	}
+	mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
 
 	return 0;
 }
@@ -292,7 +284,6 @@
 {									\
 	u32 reg, div_max, div;						\
 	unsigned long parent_rate;					\
-	int i;								\
 									\
 	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
@@ -310,15 +301,7 @@
 	}								\
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
-	for (i = 10000; i; i--)						\
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
-			HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY))	\
-			break;						\
-	if (!i)	{							\
-		pr_err("%s: divider writing timeout\n", __func__);	\
-		return -ETIMEDOUT;					\
-	}								\
-									\
+	mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);	\
 	return 0;							\
 }
 
@@ -461,7 +444,7 @@
 static int clk_misc_init(void)
 {
 	u32 reg;
-	int i;
+	int ret;
 
 	/* Fix up parent per register setting */
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
@@ -510,14 +493,7 @@
 	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
 
-	for (i = 10000; i; i--)
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
-			HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY))
-			break;
-	if (!i) {
-		pr_err("%s: divider writing timeout\n", __func__);
-		return -ETIMEDOUT;
-	}
+	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
 
 	/* Gate off cpu clock in WFI for power saving */
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
@@ -532,7 +508,7 @@
 	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
 
-	return 0;
+	return ret;
 }
 
 int __init mx23_clocks_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5d68e41..22ad12f 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -322,7 +322,6 @@
 {									\
 	u32 reg, bm_busy, div_max, d, f, div, frac;			\
 	unsigned long diff, parent_rate, calc_rate;			\
-	int i;								\
 									\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
 	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
@@ -396,16 +395,7 @@
 	}								\
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
-	for (i = 10000; i; i--)						\
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
-			HW_CLKCTRL_##dr) & bm_busy))			\
-			break;						\
-	if (!i)	{							\
-		pr_err("%s: divider writing timeout\n", __func__);	\
-		return -ETIMEDOUT;					\
-	}								\
-									\
-	return 0;							\
+	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy);		\
 }
 
 _CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
@@ -421,7 +411,6 @@
 {									\
 	u32 reg, div_max, div;						\
 	unsigned long parent_rate;					\
-	int i;								\
 									\
 	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
@@ -439,16 +428,7 @@
 	}								\
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
-	for (i = 10000; i; i--)						\
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
-			HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY))	\
-			break;						\
-	if (!i)	{							\
-		pr_err("%s: divider writing timeout\n", __func__);	\
-		return -ETIMEDOUT;					\
-	}								\
-									\
-	return 0;							\
+	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
 }
 
 _CLK_SET_RATE1(xbus_clk, XBUS)
@@ -461,7 +441,6 @@
 	u32 reg;							\
 	u64 lrate;							\
 	unsigned long parent_rate;					\
-	int i;								\
 									\
 	parent_rate = clk_get_rate(clk->parent);			\
 	if (rate > parent_rate)						\
@@ -477,18 +456,13 @@
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
 	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
 	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
+	if (reg & (1 << clk->enable_shift)) {				\
+		pr_err("%s: clock is gated\n", __func__);		\
+		return -EINVAL;						\
+	}								\
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
 									\
-	for (i = 10000; i; i--)						\
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
-			HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY))	\
-			break;						\
-	if (!i) {							\
-		pr_err("%s: divider writing timeout\n", __func__);	\
-		return -ETIMEDOUT;					\
-	}								\
-									\
-	return 0;							\
+	return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
 }
 
 _CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
@@ -654,6 +628,8 @@
 	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
 	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
 	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
+	_REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk)
+	_REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
 	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -676,7 +652,7 @@
 static int clk_misc_init(void)
 {
 	u32 reg;
-	int i;
+	int ret;
 
 	/* Fix up parent per register setting */
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
@@ -756,14 +732,7 @@
 	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
 
-	for (i = 10000; i; i--)
-		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
-			HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY))
-			break;
-	if (!i) {
-		pr_err("%s: divider writing timeout\n", __func__);
-		return -ETIMEDOUT;
-	}
+	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
 
 	/* Gate off cpu clock in WFI for power saving */
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
@@ -790,7 +759,7 @@
 	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
 
-	return 0;
+	return ret;
 }
 
 int __init mx28_clocks_init(void)
@@ -803,6 +772,8 @@
 	 */
 	clk_set_parent(&ssp0_clk, &ref_io0_clk);
 	clk_set_parent(&ssp1_clk, &ref_io0_clk);
+	clk_set_parent(&ssp2_clk, &ref_io1_clk);
+	clk_set_parent(&ssp3_clk, &ref_io1_clk);
 
 	clk_prepare_enable(&cpu_clk);
 	clk_prepare_enable(&hbus_clk);
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
index 382dacb..bef9d92 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -41,6 +41,8 @@
 const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
 	mxs_mxs_mmc_data_entry(MX28, 0, 0),
 	mxs_mxs_mmc_data_entry(MX28, 1, 1),
+	mxs_mxs_mmc_data_entry(MX28, 2, 2),
+	mxs_mxs_mmc_data_entry(MX28, 3, 3),
 };
 #endif
 
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index e1237ab..c50c3ea 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -31,4 +31,6 @@
 
 extern void icoll_init_irq(void);
 
+extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask);
+
 #endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 54f91ad..7aa5ac5 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -37,6 +37,8 @@
 #define MXS_MODULE_CLKGATE		(1 << 30)
 #define MXS_MODULE_SFTRST		(1 << 31)
 
+#define CLKCTRL_TIMEOUT		10	/* 10 ms */
+
 static void __iomem *mxs_clkctrl_reset_addr;
 
 /*
@@ -137,3 +139,17 @@
 	return -ETIMEDOUT;
 }
 EXPORT_SYMBOL(mxs_reset_block);
+
+int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT);
+	while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR)
+						+ reg_offset) & mask) {
+		if (time_after(jiffies, timeout)) {
+			pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index f6f74ad..58cacaf 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,11 +27,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 
-#include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 
@@ -246,10 +246,7 @@
 	src_cr |= SRC_CR_INIT_VAL;
 	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
 
-	/* Save global pointer to mtu, used by platform timer code */
-	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
-	nmdk_timer_init();
+	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
 }
 
 static struct sys_timer nomadik_timer = {
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
deleted file mode 100644
index bcaeaf4..0000000
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ /dev/null
@@ -1,19 +0,0 @@
-
-/*
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-#ifdef CONFIG_NOMADIK_8815
-
-extern void nmdk_timer_init(void);
-
-#endif /* NOMADIK_8815 */
-
-#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 6c58266..c199b17 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -29,7 +29,7 @@
 #include "control.h"
 
 static unsigned int omap_revision;
-
+static const char *cpu_rev;
 u32 omap_features;
 
 unsigned int omap_rev(void)
@@ -112,7 +112,7 @@
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
-static void __init omap24xx_check_revision(void)
+void __init omap2xxx_check_revision(void)
 {
 	int i, j;
 	u32 idcode, prod_id;
@@ -166,13 +166,63 @@
 	pr_info("\n");
 }
 
+#define OMAP3_SHOW_FEATURE(feat)		\
+	if (omap3_has_ ##feat())		\
+		printk(#feat" ");
+
+static void __init omap3_cpuinfo(void)
+{
+	const char *cpu_name;
+
+	/*
+	 * OMAP3430 and OMAP3530 are assumed to be same.
+	 *
+	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
+	 * on available features. Upon detection, update the CPU id
+	 * and CPU class bits.
+	 */
+	if (cpu_is_omap3630()) {
+		cpu_name = "OMAP3630";
+	} else if (cpu_is_omap3517()) {
+		/* AM35xx devices */
+		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
+	} else if (cpu_is_ti816x()) {
+		cpu_name = "TI816X";
+	} else if (cpu_is_am335x()) {
+		cpu_name =  "AM335X";
+	} else if (cpu_is_ti814x()) {
+		cpu_name = "TI814X";
+	} else if (omap3_has_iva() && omap3_has_sgx()) {
+		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
+		cpu_name = "OMAP3430/3530";
+	} else if (omap3_has_iva()) {
+		cpu_name = "OMAP3525";
+	} else if (omap3_has_sgx()) {
+		cpu_name = "OMAP3515";
+	} else {
+		cpu_name = "OMAP3503";
+	}
+
+	/* Print verbose information */
+	pr_info("%s ES%s (", cpu_name, cpu_rev);
+
+	OMAP3_SHOW_FEATURE(l2cache);
+	OMAP3_SHOW_FEATURE(iva);
+	OMAP3_SHOW_FEATURE(sgx);
+	OMAP3_SHOW_FEATURE(neon);
+	OMAP3_SHOW_FEATURE(isp);
+	OMAP3_SHOW_FEATURE(192mhz_clk);
+
+	printk(")\n");
+}
+
 #define OMAP3_CHECK_FEATURE(status,feat)				\
 	if (((status & OMAP3_ ##feat## _MASK) 				\
 		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
 		omap_features |= OMAP3_HAS_ ##feat;			\
 	}
 
-static void __init omap3_check_features(void)
+void __init omap3xxx_check_features(void)
 {
 	u32 status;
 
@@ -199,9 +249,11 @@
 	 * TODO: Get additional info (where applicable)
 	 *       e.g. Size of L2 cache.
 	 */
+
+	omap3_cpuinfo();
 }
 
-static void __init omap4_check_features(void)
+void __init omap4xxx_check_features(void)
 {
 	u32 si_type;
 
@@ -226,12 +278,13 @@
 	}
 }
 
-static void __init ti81xx_check_features(void)
+void __init ti81xx_check_features(void)
 {
 	omap_features = OMAP3_HAS_NEON;
+	omap3_cpuinfo();
 }
 
-static void __init omap3_check_revision(const char **cpu_rev)
+void __init omap3xxx_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
@@ -245,7 +298,7 @@
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
-		*cpu_rev = "1.0";
+		cpu_rev = "1.0";
 		return;
 	}
 
@@ -266,26 +319,26 @@
 		case 0: /* Take care of early samples */
 		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
-			*cpu_rev = "2.0";
+			cpu_rev = "2.0";
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
-			*cpu_rev = "2.1";
+			cpu_rev = "2.1";
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
-			*cpu_rev = "3.0";
+			cpu_rev = "3.0";
 			break;
 		case 4:
 			omap_revision = OMAP3430_REV_ES3_1;
-			*cpu_rev = "3.1";
+			cpu_rev = "3.1";
 			break;
 		case 7:
 		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
 			omap_revision = OMAP3430_REV_ES3_1_2;
-			*cpu_rev = "3.1.2";
+			cpu_rev = "3.1.2";
 		}
 		break;
 	case 0xb868:
@@ -298,13 +351,13 @@
 		switch (rev) {
 		case 0:
 			omap_revision = OMAP3517_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = OMAP3517_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 		}
 		break;
 	case 0xb891:
@@ -313,65 +366,66 @@
 		switch(rev) {
 		case 0: /* Take care of early samples */
 			omap_revision = OMAP3630_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 			omap_revision = OMAP3630_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 			break;
 		case 2:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = OMAP3630_REV_ES1_2;
-			*cpu_rev = "1.2";
+			cpu_rev = "1.2";
 		}
 		break;
 	case 0xb81e:
 		switch (rev) {
 		case 0:
 			omap_revision = TI8168_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = TI8168_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 			break;
 		}
 		break;
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
-		*cpu_rev = "1.0";
+		cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:
 		/* FALLTHROUGH */
 		case 1:
 			omap_revision = TI8148_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 2:
 			omap_revision = TI8148_REV_ES2_0;
-			*cpu_rev = "2.0";
+			cpu_rev = "2.0";
 			break;
 		case 3:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = TI8148_REV_ES2_1;
-			*cpu_rev = "2.1";
+			cpu_rev = "2.1";
 			break;
 		}
 		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
-		*cpu_rev = "1.2";
+		cpu_rev = "1.2";
 		pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
 	}
 }
 
-static void __init omap4_check_revision(void)
+void __init omap4xxx_check_revision(void)
 {
 	u32 idcode;
 	u16 hawkeye;
@@ -444,89 +498,6 @@
 		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
-#define OMAP3_SHOW_FEATURE(feat)		\
-	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
-
-static void __init omap3_cpuinfo(const char *cpu_rev)
-{
-	const char *cpu_name;
-
-	/*
-	 * OMAP3430 and OMAP3530 are assumed to be same.
-	 *
-	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
-	 * on available features. Upon detection, update the CPU id
-	 * and CPU class bits.
-	 */
-	if (cpu_is_omap3630()) {
-		cpu_name = "OMAP3630";
-	} else if (cpu_is_omap3517()) {
-		/* AM35xx devices */
-		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
-	} else if (cpu_is_ti816x()) {
-		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
-		cpu_name =  "AM335X";
-	} else if (cpu_is_ti814x()) {
-		cpu_name = "TI814X";
-	} else if (omap3_has_iva() && omap3_has_sgx()) {
-		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
-		cpu_name = "OMAP3430/3530";
-	} else if (omap3_has_iva()) {
-		cpu_name = "OMAP3525";
-	} else if (omap3_has_sgx()) {
-		cpu_name = "OMAP3515";
-	} else {
-		cpu_name = "OMAP3503";
-	}
-
-	/* Print verbose information */
-	pr_info("%s ES%s (", cpu_name, cpu_rev);
-
-	OMAP3_SHOW_FEATURE(l2cache);
-	OMAP3_SHOW_FEATURE(iva);
-	OMAP3_SHOW_FEATURE(sgx);
-	OMAP3_SHOW_FEATURE(neon);
-	OMAP3_SHOW_FEATURE(isp);
-	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
-}
-
-/*
- * Try to detect the exact revision of the omap we're running on
- */
-void __init omap2_check_revision(void)
-{
-	const char *cpu_rev;
-
-	/*
-	 * At this point we have an idea about the processor revision set
-	 * earlier with omap2_set_globals_tap().
-	 */
-	if (cpu_is_omap24xx()) {
-		omap24xx_check_revision();
-	} else if (cpu_is_omap34xx()) {
-		omap3_check_revision(&cpu_rev);
-
-		/* TI81XX doesn't have feature register */
-		if (!cpu_is_ti81xx())
-			omap3_check_features();
-		else
-			ti81xx_check_features();
-
-		omap3_cpuinfo(cpu_rev);
-		return;
-	} else if (cpu_is_omap44xx()) {
-		omap4_check_revision();
-		omap4_check_features();
-		return;
-	} else {
-		pr_err("OMAP revision unknown, please fix!\n");
-	}
-}
-
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index fb11b44..168fd12 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -352,7 +352,6 @@
 
 static void __init omap_common_init_early(void)
 {
-	omap2_check_revision();
 	omap_init_consistent_dma_size();
 }
 
@@ -393,6 +392,7 @@
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
+	omap2xxx_check_revision();
 	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
@@ -407,6 +407,7 @@
 void __init omap2430_init_early(void)
 {
 	omap2_set_globals_243x();
+	omap2xxx_check_revision();
 	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
@@ -425,6 +426,8 @@
 void __init omap3_init_early(void)
 {
 	omap2_set_globals_3xxx();
+	omap3xxx_check_revision();
+	omap3xxx_check_features();
 	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -457,6 +460,8 @@
 void __init ti81xx_init_early(void)
 {
 	omap2_set_globals_ti81xx();
+	omap3xxx_check_revision();
+	ti81xx_check_features();
 	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -471,6 +476,8 @@
 void __init omap4430_init_early(void)
 {
 	omap2_set_globals_443x();
+	omap4xxx_check_revision();
+	omap4xxx_check_features();
 	omap_common_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 2cc1aa0..415a6f1 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -420,8 +420,7 @@
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap2_mbox_init);
+module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index b882204..ac49384 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -150,7 +150,8 @@
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index ebc5950..70de277 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c6..4b57757 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -270,7 +270,6 @@
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0d729e6..42d5cca 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -49,7 +49,6 @@
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index f147755..29b62af 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -226,6 +226,12 @@
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 00d6eac..3352b37 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -208,6 +208,7 @@
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -367,7 +368,6 @@
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c1673b3..6bce78e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -229,6 +229,7 @@
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -455,7 +456,6 @@
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f402af..3918a67 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -462,7 +462,6 @@
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index d082a58..5ce434b 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -283,7 +283,6 @@
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
index db8a98a..0c1eb1d 100644
--- a/arch/arm/mach-s3c2440/common.h
+++ b/arch/arm/mach-s3c2440/common.h
@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 2456955..19b577b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -487,5 +487,5 @@
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index d6a9763..d7ae49c 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -222,5 +222,5 @@
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 7365a44..cfd2020 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -601,5 +601,5 @@
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index adbbb85..5d66fb2 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -701,5 +701,5 @@
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 40eaf84..5198e3e 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -158,5 +158,5 @@
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 4c480ef..c5daeb6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -436,5 +436,5 @@
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 4a8e2d3..200debb 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -822,5 +822,5 @@
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 20103ba..56af354 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -213,5 +213,5 @@
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 1deb60d..83a1036 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -183,5 +183,5 @@
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 517623a..2b3dddb 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 36bc60f..d15852f 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index dd20c66..326ea3a 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -83,6 +83,11 @@
 	help
 	 Common setup code for SPI GPIO configurations
 
+config S3C64XX_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 # S36400 Macchine support
 
 config MACH_SMDK6400
@@ -157,6 +162,7 @@
 	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_USB_PHY
 	help
 	  Machine support for the Samsung SMDK6410
 
@@ -256,6 +262,7 @@
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_USB_PHY
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
@@ -283,6 +290,7 @@
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
 	select S3C64XX_SETUP_SPI
+	select S3C64XX_SETUP_USB_PHY
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 1822ac2..f9ce1dc 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -22,6 +22,7 @@
 # PM
 
 obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
@@ -42,6 +43,7 @@
 obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index aebbcc2..52f079a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -207,6 +207,15 @@
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
 	}, {
+		.name		= "ac97",
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}, {
+		.name		= "cfcon",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
+	}, {
 		.name		= "dma0",
 		.parent		= &clk_h,
 		.enable		= s3c64xx_hclk_ctrl,
@@ -216,6 +225,107 @@
 		.parent		= &clk_h,
 		.enable		= s3c64xx_hclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	}, {
+		.name		= "3dse",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
+	}, {
+		.name		= "hclk_secur",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
+	}, {
+		.name		= "sdma1",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
+	}, {
+		.name		= "sdma0",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
+	}, {
+		.name		= "hclk_jpeg",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
+	}, {
+		.name		= "camif",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
+	}, {
+		.name		= "hclk_scaler",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
+	}, {
+		.name		= "2d",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_2D,
+	}, {
+		.name		= "tv",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_TV,
+	}, {
+		.name		= "post0",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
+	}, {
+		.name		= "rot",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
+	}, {
+		.name		= "hclk_mfc",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
+	}, {
+		.name		= "pclk_mfc",
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
+	}, {
+		.name		= "dac27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
+	}, {
+		.name		= "tv27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
+	}, {
+		.name		= "scaler27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
+	}, {
+		.name		= "sclk_scaler",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
+	}, {
+		.name		= "post0_27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
+	}, {
+		.name		= "secur",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
+	}, {
+		.name		= "sclk_mfc",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
+	}, {
+		.name		= "cam",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_CAM,
+	}, {
+		.name		= "sclk_jpeg",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
 	},
 };
 
@@ -289,16 +399,7 @@
 		.name		= "watchdog",
 		.parent		= &clk_p,
 		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}
+	},
 };
 
 static struct clk clk_hsmmc0 = {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
new file mode 100644
index 0000000..179460f
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s3c64xx/cpuidle.c
+ *
+ * Copyright (c) 2011 Wolfson Microelectronics, plc
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-syscon-power.h>
+
+static int s3c64xx_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv,
+			      int index)
+{
+	struct timeval before, after;
+	unsigned long tmp;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	/* Setup PWRCFG to enter idle mode */
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	cpu_do_idle();
+
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+		    (after.tv_usec - before.tv_usec);
+
+	dev->last_residency = idle_time;
+	return index;
+}
+
+static struct cpuidle_state s3c64xx_cpuidle_set[] = {
+	[0] = {
+		.enter			= s3c64xx_enter_idle,
+		.exit_latency		= 1,
+		.target_residency	= 1,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "IDLE",
+		.desc			= "System active, ARM gated",
+	},
+};
+
+static struct cpuidle_driver s3c64xx_cpuidle_driver = {
+	.name		= "s3c64xx_cpuidle",
+	.owner		= THIS_MODULE,
+	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static struct cpuidle_device s3c64xx_cpuidle_device = {
+	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static int __init s3c64xx_init_cpuidle(void)
+{
+	int ret;
+
+	memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
+	       sizeof(s3c64xx_cpuidle_set));
+	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
+
+	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
+	if (ret) {
+		pr_err("Failed to register cpuidle device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8077f65..3b56bd9 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -59,6 +59,7 @@
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
 #include <plat/s3c64xx-spi.h>
+#include <plat/udc-hs.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
@@ -698,6 +699,8 @@
 	.cfg_gpio		= crag6410_cfg_sdhci0,
 };
 
+static struct s3c_hsotg_plat crag6410_hsotg_pdata;
+
 static void __init crag6410_machine_init(void)
 {
 	/* Open drain IRQs need pullups */
@@ -722,6 +725,7 @@
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ce31db1..ce745e1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -187,6 +187,8 @@
 	},
 };
 
+static struct s3c_hsotg_plat smartq_hsotg_pdata;
+
 static int __init smartq_lcd_setup_gpio(void)
 {
 	int ret;
@@ -383,6 +385,7 @@
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ca6fc20..d55bc96 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -72,6 +72,7 @@
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/udc-hs.h>
 
 #include "common.h"
 
@@ -631,6 +632,8 @@
 	.pwm_id = 1,
 };
 
+static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -659,6 +662,7 @@
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
new file mode 100644
index 0000000..f6757e0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s3c_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s3c_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s3c_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s3c_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 2cdc42e..82525e3 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -65,6 +65,11 @@
 	help
 	  Common setup code for SPI GPIO configurations.
 
+config S5PV210_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -107,6 +112,7 @@
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
 	select S5PV210_SETUP_FIMC
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 76a121d..1c4e419 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -39,3 +39,4 @@
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S5PV210_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
index 26691d3..cccb1ed 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
@@ -13,7 +13,3 @@
 #define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
 #define S5PV210_USB_PHY0_EN	(1 << 0)
 #define S5PV210_USB_PHY1_EN	(1 << 1)
-
-/* compatibility defines for s3c-hsotg driver */
-#define S3C64XX_OTHERS		S5PV210_USB_PHY_CON
-#define S3C64XX_OTHERS_USBMASK	S5PV210_USB_PHY0_EN
diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c
new file mode 100644
index 0000000..be39cf4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-usb-phy.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 068b754..bd7953b 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -38,6 +38,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -46,8 +47,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
@@ -486,27 +485,6 @@
 	&sdhi1_device,
 };
 
-static struct map_desc ag5evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ag5evm_map_io(void)
-{
-	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -622,22 +600,12 @@
 	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
 }
 
-static void __init ag5evm_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer ag5evm_timer = {
-	.init	= ag5evm_timer_init,
-};
-
 MACHINE_START(AG5EVM, "ag5evm")
-	.map_io		= ag5evm_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
-	.timer		= &ag5evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index eeb4d96..4739f03 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -61,8 +61,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/setup.h>
 
 /*
@@ -794,7 +792,7 @@
 static struct platform_device fsi_ak4643_device = {
 	.name	= "fsi-ak4642-audio",
 	.dev	= {
-		.platform_data	= &fsi_info,
+		.platform_data	= &fsi2_ak4643_info,
 	},
 };
 
@@ -1190,27 +1188,6 @@
 	},
 };
 
-static struct map_desc ap4evb_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ap4evb_map_io(void)
-{
-	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
 #define USCCR1		0xE6058144
@@ -1219,6 +1196,9 @@
 	u32 srcr4;
 	struct clk *clk;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1455,23 +1435,11 @@
 	pm_clk_add(&lcdc1_device.dev, "hdmi");
 }
 
-static void __init ap4evb_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer ap4evb_timer = {
-	.init		= ap4evb_timer_init,
-};
-
 MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= ap4evb_map_io,
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
-	.timer		= &ap4evb_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 4d22016..396814a 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/videodev2.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -241,7 +242,7 @@
 	.clock_source	= LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan			= LCDC_CHAN_MAINLCD,
-		.bpp			= 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type		= RGB24,
 		.clock_divider		= 5,
 		.flags			= 0,
@@ -327,28 +328,6 @@
  * map I/O
  */
 static struct map_desc bonito_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
 	/*
 	 * for FPGA (0x1800000-0x19ffffff)
 	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
@@ -363,11 +342,8 @@
 
 static void __init bonito_map_io(void)
 {
+	r8a7740_map_io();
 	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-
-	/* setup early devices and console here as well */
-	r8a7740_add_early_devices();
-	shmobile_setup_console();
 }
 
 /*
@@ -491,7 +467,7 @@
 	}
 }
 
-static void __init bonito_timer_init(void)
+static void __init bonito_earlytimer_init(void)
 {
 	u16 val;
 	u8 md_ck = 0;
@@ -506,17 +482,22 @@
 		md_ck |= MD_CK0;
 
 	r8a7740_clock_init(md_ck);
-	shmobile_timer.init();
+	shmobile_earlytimer_init();
 }
 
-struct sys_timer bonito_timer = {
-	.init	= bonito_timer_init,
-};
+void __init bonito_add_early_devices(void)
+{
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = bonito_earlytimer_init;
+}
 
 MACHINE_START(BONITO, "bonito")
 	.map_io		= bonito_map_io,
+	.init_early	= bonito_add_early_devices,
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= bonito_init,
-	.timer		= &bonito_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 72d5572..b627e89 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -37,8 +37,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * IrDA
@@ -246,27 +244,6 @@
 	&irda_device,
 };
 
-static struct map_desc g3evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g3evm_map_io(void)
-{
-	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7367_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init g3evm_init(void)
 {
 	sh7367_pinmux_init();
@@ -354,20 +331,11 @@
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
 }
 
-static void __init g3evm_timer_init(void)
-{
-	sh7367_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g3evm_timer = {
-	.init		= g3evm_timer_init,
-};
-
 MACHINE_START(G3EVM, "g3evm")
-	.map_io		= g3evm_map_io,
+	.map_io		= sh7367_map_io,
+	.init_early	= sh7367_add_early_devices,
 	.init_irq	= sh7367_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g3evm_init,
-	.timer		= &g3evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 2220b88..46d757d 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -38,8 +38,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * SDHI
@@ -260,27 +258,6 @@
 	&sdhi1_device,
 };
 
-static struct map_desc g4evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g4evm_map_io(void)
-{
-	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7377_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_SDHID0_D0	0xe60520fc
 #define GPIO_SDHID0_D1	0xe60520fd
 #define GPIO_SDHID0_D2	0xe60520fe
@@ -397,20 +374,11 @@
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
 }
 
-static void __init g4evm_timer_init(void)
-{
-	sh7377_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g4evm_timer = {
-	.init		= g4evm_timer_init,
-};
-
 MACHINE_START(G4EVM, "g4evm")
-	.map_io		= g4evm_map_io,
+	.map_io		= sh7377_map_io,
+	.init_early	= sh7377_add_early_devices,
 	.init_irq	= sh7377_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g4evm_init,
-	.timer		= &g4evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index c8e7ca2..61c0672 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -43,7 +43,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -409,27 +408,6 @@
 	&sdhi1_device,
 };
 
-static struct map_desc kota2_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init kota2_map_io(void)
-{
-	iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init kota2_init(void)
 {
 	sh73a0_pinmux_init();
@@ -535,22 +513,12 @@
 	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
 }
 
-static void __init kota2_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer kota2_timer = {
-	.init	= kota2_timer_init,
-};
-
 MACHINE_START(KOTA2, "kota2")
-	.map_io		= kota2_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
-	.timer		= &kota2_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index a281324..71d2791 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -57,8 +57,6 @@
 #include <mach/sh7372.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
 /*
@@ -1337,25 +1335,13 @@
 	},
 };
 
-static struct map_desc mackerel_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
 static void __init mackerel_map_io(void)
 {
-	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
+	sh7372_map_io();
+	/* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
+	 * enough to allocate the frame buffer memory.
+	 */
+	init_consistent_dma_size(12 << 20);
 }
 
 #define GPIO_PORT9CR	0xE6051009
@@ -1370,6 +1356,9 @@
 	struct clk *clk;
 	int ret;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1573,23 +1562,11 @@
 	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
-static void __init mackerel_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer mackerel_timer = {
-	.init		= mackerel_timer_init,
-};
-
 MACHINE_START(MACKEREL, "mackerel")
 	.map_io		= mackerel_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
-	.timer		= &mackerel_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index f0e02c0..cbd5e4c 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -33,8 +33,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
@@ -72,49 +70,6 @@
 	&eth_device,
 };
 
-static struct map_desc marzen_io_desc[] __initdata = {
-	/* 2M entity map for 0xf0000000 (MPCORE) */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xf0000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
-	{
-		.virtual	= 0xfe000000,
-		.pfn		= __phys_to_pfn(0xfe000000),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init marzen_map_io(void)
-{
-	iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc));
-}
-
-static void __init marzen_init_early(void)
-{
-	r8a7779_add_early_devices();
-
-	/* Early serial console setup is not included here due to
-	 * memory map collisions. The SCIF serial ports in r8a7779
-	 * are difficult to entity map 1:1 due to collision with the
-	 * virtual memory range used by the coherent DMA code on ARM.
-	 *
-	 * Anyone wanting to debug early can remove UPF_IOREMAP from
-	 * the sh-sci serial console platform data, adjust mapbase
-	 * to a static M:N virt:phys mapping that needs to be added to
-	 * the mappings passed with iotable_init() above.
-	 *
-	 * Then add a call to shmobile_setup_console() from this function.
-	 *
-	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
-	 * command line.
-	 */
-}
-
 static void __init marzen_init(void)
 {
 	r8a7779_pinmux_init();
@@ -135,23 +90,12 @@
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 
-static void __init marzen_timer_init(void)
-{
-	r8a7779_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer marzen_timer = {
-	.init	= marzen_timer_init,
-};
-
 MACHINE_START(MARZEN, "marzen")
-	.map_io		= marzen_map_io,
-	.init_early	= marzen_init_early,
+	.map_io		= r8a7779_map_io,
+	.init_early	= r8a7779_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.timer		= &marzen_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 3b35b9a..99c4d74 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -93,7 +93,7 @@
 	return clk->parent->rate / (int)(clk->priv);
 }
 
-static struct clk_ops div_clk_ops = {
+static struct sh_clk_ops div_clk_ops = {
 	.recalc	= div_recalc,
 };
 
@@ -125,7 +125,7 @@
 	.parent	= &extal2_clk,
 };
 
-static struct clk_ops followparent_clk_ops = {
+static struct sh_clk_ops followparent_clk_ops = {
 	.recalc	= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -376,7 +376,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7740 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index b4b0e8c..7d6e9fe 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -107,7 +107,7 @@
 	return clk->parent->rate * 4;
 }
 
-static struct clk_ops mul4_clk_ops = {
+static struct sh_clk_ops mul4_clk_ops = {
 	.recalc		= mul4_recalc,
 };
 
@@ -170,7 +170,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7779 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 5218c34..006e7b5 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -74,7 +74,7 @@
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -101,7 +101,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -128,7 +128,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -349,7 +349,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7367 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 293456d..de243e3 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -89,7 +89,7 @@
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -128,7 +128,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -276,7 +276,7 @@
 	return 0;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 	.round_rate	= pllc2_round_rate,
 	.set_rate	= pllc2_set_rate,
@@ -468,7 +468,7 @@
 	return 0;
 }
 
-static struct clk_ops fsidiv_clk_ops = {
+static struct sh_clk_ops fsidiv_clk_ops = {
 	.recalc		= fsidiv_recalc,
 	.round_rate	= fsidiv_round_rate,
 	.set_rate	= fsidiv_set_rate,
@@ -710,7 +710,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7372 clocks\n");
 
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index 8cee7b1..0798a15 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -77,7 +77,7 @@
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -110,7 +110,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -137,7 +137,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -360,7 +360,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7377 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 7727cca..472d1f5 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -88,7 +88,7 @@
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -97,7 +97,7 @@
 	return clk->parent->rate / 7;
 }
 
-static struct clk_ops div7_clk_ops = {
+static struct sh_clk_ops div7_clk_ops = {
 	.recalc		= div7_recalc,
 };
 
@@ -106,7 +106,7 @@
 	return clk->parent->rate / 13;
 }
 
-static struct clk_ops div13_clk_ops = {
+static struct sh_clk_ops div13_clk_ops = {
 	.recalc		= div13_recalc,
 };
 
@@ -122,7 +122,7 @@
 	.parent		= &sh73a0_extal2_clk,
 };
 
-static struct clk_ops main_clk_ops = {
+static struct sh_clk_ops main_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
@@ -438,7 +438,7 @@
 	return 0;
 }
 
-static struct clk_ops dsiphy_clk_ops = {
+static struct sh_clk_ops dsiphy_clk_ops = {
 	.recalc		= dsiphy_recalc,
 	.round_rate	= dsiphy_round_rate,
 	.set_rate	= dsiphy_set_rate,
@@ -620,7 +620,7 @@
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh73a0 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 31654d7..e816ca9 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -24,7 +24,7 @@
 #include <linux/sh_clk.h>
 #include <linux/export.h>
 
-int __init clk_init(void)
+int __init shmobile_clk_init(void)
 {
 	/* Kick the child clocks.. */
 	recalculate_root_clocks();
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e4b945e..e41b61a 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -1,12 +1,13 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
+extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
 struct clk;
-extern int clk_init(void);
+extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
@@ -14,6 +15,7 @@
 extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
+extern void sh7367_map_io(void);
 extern void sh7367_add_early_devices(void);
 extern void sh7367_add_standard_devices(void);
 extern void sh7367_clock_init(void);
@@ -22,6 +24,7 @@
 extern struct clk sh7367_extal2_clk;
 
 extern void sh7377_init_irq(void);
+extern void sh7377_map_io(void);
 extern void sh7377_add_early_devices(void);
 extern void sh7377_add_standard_devices(void);
 extern void sh7377_clock_init(void);
@@ -30,6 +33,7 @@
 extern struct clk sh7377_extal2_clk;
 
 extern void sh7372_init_irq(void);
+extern void sh7372_map_io(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
@@ -41,6 +45,7 @@
 extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
+extern void sh73a0_map_io(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
@@ -56,12 +61,14 @@
 extern void sh73a0_smp_prepare_cpus(void);
 
 extern void r8a7740_init_irq(void);
+extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 
 extern void r8a7779_init_irq(void);
+extern void r8a7779_map_io(void);
 extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 986dca6..74e5234 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -25,8 +25,41 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/r8a7740.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc r8a7740_io_desc[] __initdata = {
+	 /*
+	  * for CPGA/INTC/PFC
+	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
+	  */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 160 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * for l2x0_init()
+	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
+	 */
+	{
+		.virtual	= 0xf0002000,
+		.pfn		= __phys_to_pfn(0xf0100000),
+		.length		= PAGE_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#endif
+};
+
+void __init r8a7740_map_io(void)
+{
+	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -345,8 +378,20 @@
 			     ARRAY_SIZE(r8a7740_late_devices));
 }
 
+static void __init r8a7740_earlytimer_init(void)
+{
+	r8a7740_clock_init(0);
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7740_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7740_early_devices,
 				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7740_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 4725663..6820d78 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -33,6 +33,31 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static struct map_desc r8a7779_io_desc[] __initdata = {
+	/* 2M entity map for 0xf0000000 (MPCORE) */
+	{
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0xf0000000),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
+	{
+		.virtual	= 0xfe000000,
+		.pfn		= __phys_to_pfn(0xfe000000),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init r8a7779_map_io(void)
+{
+	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffe40000,
@@ -219,6 +244,10 @@
 
 void __init r8a7779_add_standard_devices(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
+	l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+#endif
 	r8a7779_pm_init();
 
 	r8a7779_init_pm_domain(&r8a7779_sh4a);
@@ -232,8 +261,33 @@
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+static void __init r8a7779_earlytimer_init(void)
+{
+	r8a7779_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7779_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7779_early_devices,
 				   ARRAY_SIZE(r8a7779_early_devices));
+
+	/* Early serial console setup is not included here due to
+	 * memory map collisions. The SCIF serial ports in r8a7779
+	 * are difficult to entity map 1:1 due to collision with the
+	 * virtual memory range used by the coherent DMA code on ARM.
+	 *
+	 * Anyone wanting to debug early can remove UPF_IOREMAP from
+	 * the sh-sci serial console platform data, adjust mapbase
+	 * to a static M:N virt:phys mapping that needs to be added to
+	 * the mappings passed with iotable_init() above.
+	 *
+	 * Then add a call to shmobile_setup_console() from this function.
+	 *
+	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
+	 * command line in case of the marzen board.
+	 */
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7779_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index e546017..a51e1a1 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -29,8 +29,28 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7367_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7367_map_io(void)
+{
+	iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -435,6 +455,12 @@
 			    ARRAY_SIZE(sh7367_devices));
 }
 
+static void __init sh7367_earlytimer_init(void)
+{
+	sh7367_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SYMSTPCR2 0xe6158048
 #define SYMSTPCR2_CMT1 (1 << 29)
 
@@ -445,4 +471,10 @@
 
 	early_platform_add_devices(sh7367_early_devices,
 				   ARRAY_SIZE(sh7367_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7367_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a83cf51..c14fb35 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -33,8 +33,28 @@
 #include <linux/pm_domain.h>
 #include <mach/hardware.h>
 #include <mach/sh7372.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7372_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7372_map_io(void)
+{
+	iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -1045,8 +1065,20 @@
 	sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
 }
 
+static void __init sh7372_earlytimer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh7372_add_early_devices(void)
 {
 	early_platform_add_devices(sh7372_early_devices,
 				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7372_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index bb405b8..9f14609 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -30,8 +30,28 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7377_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7377_map_io(void)
+{
+	iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -456,6 +476,12 @@
 			    ARRAY_SIZE(sh7377_devices));
 }
 
+static void __init sh7377_earlytimer_init(void)
+{
+	sh7377_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SMSTPCR3 0xe615013c
 #define SMSTPCR3_CMT1 (1 << 29)
 
@@ -466,4 +492,10 @@
 
 	early_platform_add_devices(sh7377_early_devices,
 				   ARRAY_SIZE(sh7377_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7377_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 20e71e5..b6a0734 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -32,8 +32,28 @@
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh73a0_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh73a0_map_io(void)
+{
+	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
@@ -667,8 +687,20 @@
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+static void __init sh73a0_earlytimer_init(void)
+{
+	sh73a0_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh73a0_add_early_devices(void)
 {
 	early_platform_add_devices(sh73a0_early_devices,
 				   ARRAY_SIZE(sh73a0_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh73a0_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 895794b..be1ad70 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -36,11 +36,15 @@
 	early_platform_driver_probe("earlytimer", 2, 0);
 }
 
-static void __init shmobile_timer_init(void)
+void __init shmobile_earlytimer_init(void)
 {
 	late_time_init = shmobile_late_time_init;
 }
 
+static void __init shmobile_timer_init(void)
+{
+}
+
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e120ff5..fc4ebe3 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -7,12 +7,15 @@
 obj-y                                   += timer.o
 obj-y                                   += pinmux.o
 obj-y					+= fuse.o
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
+obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= powergate.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
 obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 3c197e2..b4124b1 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -34,16 +34,38 @@
 #include <asm/hardware/gic.h>
 
 #include "board.h"
+#include "clock.h"
 
 static struct of_device_id tegra_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
 	{}
 };
 
+struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+	{}
+};
+
+static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "uartd",	"pll_p",	408000000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+
 static void __init tegra30_dt_init(void)
 {
+	tegra_clk_init_from_table(tegra_dt_clk_init_table);
+
 	of_platform_populate(NULL, tegra_dt_match_table,
-				NULL, NULL);
+				tegra30_auxdata_lookup, NULL);
 }
 
 static const char *tegra30_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 8337068..8dad8d1 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -399,6 +399,28 @@
 }
 EXPORT_SYMBOL(tegra_periph_reset_assert);
 
+/* Several extended clock configuration bits (e.g., clock routing, clock
+ * phase control) are included in PLL and peripheral clock source
+ * registers. */
+int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&c->spinlock, flags);
+
+	if (!c->ops || !c->ops->clk_cfg_ex) {
+		ret = -ENOSYS;
+		goto out;
+	}
+	ret = c->ops->clk_cfg_ex(c, p, setting);
+
+out:
+	spin_unlock_irqrestore(&c->spinlock, flags);
+
+	return ret;
+}
+
 #ifdef CONFIG_DEBUG_FS
 
 static int __clk_lock_all_spinlocks(void)
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index 5c44106..bc30065 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -24,6 +24,8 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
+#include <mach/clk.h>
+
 #define DIV_BUS			(1 << 0)
 #define DIV_U71			(1 << 1)
 #define DIV_U71_FIXED		(1 << 2)
@@ -39,7 +41,16 @@
 #define PERIPH_MANUAL_RESET	(1 << 12)
 #define PLL_ALT_MISC_REG	(1 << 13)
 #define PLLU			(1 << 14)
+#define PLLX                    (1 << 15)
+#define MUX_PWM                 (1 << 16)
+#define MUX8                    (1 << 17)
+#define DIV_U71_UART            (1 << 18)
+#define MUX_CLK_OUT             (1 << 19)
+#define PLLM                    (1 << 20)
+#define DIV_U71_INT             (1 << 21)
+#define DIV_U71_IDLE            (1 << 22)
 #define ENABLE_ON_INIT		(1 << 28)
+#define PERIPH_ON_APB           (1 << 29)
 
 struct clk;
 
@@ -65,6 +76,8 @@
 	int		(*set_rate)(struct clk *, unsigned long);
 	long		(*round_rate)(struct clk *, unsigned long);
 	void		(*reset)(struct clk *, bool);
+	int		(*clk_cfg_ex)(struct clk *,
+				enum tegra_clk_ex_param, u32);
 };
 
 enum clk_state {
@@ -114,6 +127,7 @@
 			unsigned long			vco_max;
 			const struct clk_pll_freq_table	*freq_table;
 			int				lock_delay;
+			unsigned long			fixed_rate;
 		} pll;
 		struct {
 			u32				sel;
@@ -146,6 +160,7 @@
 };
 
 void tegra2_init_clocks(void);
+void tegra30_init_clocks(void);
 void clk_init(struct clk *clk);
 struct clk *tegra_get_clock_by_name(const char *name);
 int clk_reparent(struct clk *c, struct clk *parent);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 2db20da..29a3f57 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -106,6 +106,7 @@
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
 void __init tegra30_init_early(void)
 {
+	tegra30_init_clocks();
 	tegra_init_cache(0x441, 0x551);
 }
 #endif
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
new file mode 100644
index 0000000..d83a8c0
--- /dev/null
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/mach-tegra/cpuidle.c
+ *
+ * CPU idle driver for Tegra CPUs
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation.
+ * Copyright (c) 2011 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ *
+ * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/hrtimer.h>
+
+#include <mach/iomap.h>
+
+extern void tegra_cpu_wfi(void);
+
+static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int index);
+
+struct cpuidle_driver tegra_idle_driver = {
+	.name = "tegra_idle",
+	.owner = THIS_MODULE,
+	.state_count = 1,
+	.states = {
+		[0] = {
+			.enter			= tegra_idle_enter_lp3,
+			.exit_latency		= 10,
+			.target_residency	= 10,
+			.power_usage		= 600,
+			.flags			= CPUIDLE_FLAG_TIME_VALID,
+			.name			= "LP3",
+			.desc			= "CPU flow-controlled",
+		},
+	},
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
+
+static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
+	struct cpuidle_driver *drv, int index)
+{
+	ktime_t enter, exit;
+	s64 us;
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	enter = ktime_get();
+
+	tegra_cpu_wfi();
+
+	exit = ktime_sub(ktime_get(), enter);
+	us = ktime_to_us(exit);
+
+	local_fiq_enable();
+	local_irq_enable();
+
+	dev->last_residency = us;
+
+	return index;
+}
+
+static int __init tegra_cpuidle_init(void)
+{
+	int ret;
+	unsigned int cpu;
+	struct cpuidle_device *dev;
+	struct cpuidle_driver *drv = &tegra_idle_driver;
+
+	ret = cpuidle_register_driver(&tegra_idle_driver);
+	if (ret) {
+		pr_err("CPUidle driver registration failed\n");
+		return ret;
+	}
+
+	for_each_possible_cpu(cpu) {
+		dev = &per_cpu(tegra_idle_device, cpu);
+		dev->cpu = cpu;
+
+		dev->state_count = drv->state_count;
+		ret = cpuidle_register_device(dev);
+		if (ret) {
+			pr_err("CPU%u: CPUidle device registration failed\n",
+				cpu);
+			return ret;
+		}
+	}
+	return 0;
+}
+device_initcall(tegra_cpuidle_init);
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h
new file mode 100644
index 0000000..74c6efb
--- /dev/null
+++ b/arch/arm/mach-tegra/flowctrl.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-tegra/flowctrl.h
+ *
+ * functions and macros to control the flowcontroller
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_FLOWCTRL_H
+#define __MACH_TEGRA_FLOWCTRL_H
+
+#define FLOW_CTRL_HALT_CPU0_EVENTS	0x0
+#define FLOW_CTRL_WAITEVENT		(2 << 29)
+#define FLOW_CTRL_WAIT_FOR_INTERRUPT	(4 << 29)
+#define FLOW_CTRL_JTAG_RESUME		(1 << 28)
+#define FLOW_CTRL_HALT_CPU_IRQ		(1 << 10)
+#define	FLOW_CTRL_HALT_CPU_FIQ		(1 << 8)
+#define FLOW_CTRL_CPU0_CSR		0x8
+#define	FLOW_CTRL_CSR_INTR_FLAG		(1 << 15)
+#define FLOW_CTRL_CSR_EVENT_FLAG	(1 << 14)
+#define FLOW_CTRL_CSR_ENABLE		(1 << 0)
+#define FLOW_CTRL_HALT_CPU1_EVENTS	0x14
+#define FLOW_CTRL_CPU1_CSR		0x18
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
index fc3ecb6..d97e403 100644
--- a/arch/arm/mach-tegra/include/mach/clk.h
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -22,10 +22,20 @@
 
 struct clk;
 
+enum tegra_clk_ex_param {
+	TEGRA_CLK_VI_INP_SEL,
+	TEGRA_CLK_DTV_INVERT,
+	TEGRA_CLK_NAND_PAD_DIV2_ENB,
+	TEGRA_CLK_PLLD_CSI_OUT_ENB,
+	TEGRA_CLK_PLLD_DSI_OUT_ENB,
+	TEGRA_CLK_PLLD_MIPI_MUX_SEL,
+};
+
 void tegra_periph_reset_deassert(struct clk *c);
 void tegra_periph_reset_assert(struct clk *c);
 
 unsigned long clk_get_rate_all_locked(struct clk *c);
 void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
+int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
 
 #endif
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index 19dec3a..67644c9 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -74,6 +74,9 @@
 #define TEGRA_QUATERNARY_ICTLR_BASE	0x60004300
 #define TEGRA_QUATERNARY_ICTLR_SIZE	SZ_64
 
+#define TEGRA_QUINARY_ICTLR_BASE	0x60004400
+#define TEGRA_QUINARY_ICTLR_SIZE	SZ_64
+
 #define TEGRA_TMR1_BASE			0x60005000
 #define TEGRA_TMR1_SIZE			SZ_8
 
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
index a2146cd..aad1a2c 100644
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ b/arch/arm/mach-tegra/include/mach/irqs.h
@@ -165,11 +165,12 @@
 #define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
 #define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
 
-#define INT_MAIN_NR			(INT_QUAD_BASE + 32 - INT_PRI_BASE)
-
+/* Tegra30 has 5 banks of 32 IRQs */
+#define INT_MAIN_NR			(32 * 5)
 #define INT_GPIO_BASE			(INT_PRI_BASE + INT_MAIN_NR)
 
-#define INT_GPIO_NR			(28 * 8)
+/* Tegra30 has 8 banks of 32 GPIOs */
+#define INT_GPIO_NR			(32 * 8)
 
 #define TEGRA_NR_IRQS			(INT_GPIO_BASE + INT_GPIO_NR)
 
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 4e1afcd..2f5bd2d 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -44,14 +44,16 @@
 #define ICTLR_COP_IER_CLR	0x38
 #define ICTLR_COP_IEP_CLASS	0x3c
 
-#define NUM_ICTLRS 4
 #define FIRST_LEGACY_IRQ 32
 
+static int num_ictlrs;
+
 static void __iomem *ictlr_reg_base[] = {
 	IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE),
 	IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE),
 	IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE),
 	IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE),
+	IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
 };
 
 static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg)
@@ -60,7 +62,7 @@
 	u32 mask;
 
 	BUG_ON(irq < FIRST_LEGACY_IRQ ||
-		irq >= FIRST_LEGACY_IRQ + NUM_ICTLRS * 32);
+		irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32);
 
 	base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32];
 	mask = BIT((irq - FIRST_LEGACY_IRQ) % 32);
@@ -113,8 +115,18 @@
 void __init tegra_init_irq(void)
 {
 	int i;
+	void __iomem *distbase;
 
-	for (i = 0; i < NUM_ICTLRS; i++) {
+	distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
+	num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f;
+
+	if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) {
+		WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.",
+			num_ictlrs, ARRAY_SIZE(ictlr_reg_base));
+		num_ictlrs = ARRAY_SIZE(ictlr_reg_base);
+	}
+
+	for (i = 0; i < num_ictlrs; i++) {
 		void __iomem *ictlr = ictlr_reg_base[i];
 		writel(~0, ictlr + ICTLR_CPU_IER_CLR);
 		writel(0, ictlr + ICTLR_CPU_IEP_CLASS);
@@ -131,6 +143,6 @@
 	 * initialized elsewhere under DT.
 	 */
 	if (!of_have_populated_dt())
-		gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
+		gic_init(0, 29, distbase,
 			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
 }
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
new file mode 100644
index 0000000..8f9fde1
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep.S
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-tegra/sleep.S
+ *
+ * Copyright (c) 2010-2011, NVIDIA Corporation.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <mach/io.h>
+#include <mach/iomap.h>
+
+#include "flowctrl.h"
+
+#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+					+ IO_PPSB_VIRT)
+
+/* returns the offset of the flow controller halt register for a cpu */
+.macro cpu_to_halt_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x14
+	moveq	\rd, #0
+.endm
+
+/* returns the offset of the flow controller csr register for a cpu */
+.macro cpu_to_csr_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x18
+	moveq	\rd, #8
+.endm
+
+/* returns the ID of the current processor */
+.macro cpu_id, rd
+	mrc	p15, 0, \rd, c0, c0, 5
+	and	\rd, \rd, #0xF
+.endm
+
+/* loads a 32-bit value into a register without a data access */
+.macro mov32, reg, val
+	movw	\reg, #:lower16:\val
+	movt	\reg, #:upper16:\val
+.endm
+
+/*
+ * tegra_cpu_wfi
+ *
+ * puts current CPU in clock-gated wfi using the flow controller
+ *
+ * corrupts r0-r3
+ * must be called with MMU on
+ */
+
+ENTRY(tegra_cpu_wfi)
+	cpu_id	r0
+	cpu_to_halt_reg r1, r0
+	cpu_to_csr_reg r2, r0
+	mov32	r0, TEGRA_FLOW_CTRL_VIRT
+	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	str	r3, [r0, r2]	@ clear event & interrupt status
+	mov	r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
+	str	r3, [r0, r1]	@ put flow controller in wait irq mode
+	dsb
+	wfi
+	mov	r3, #0
+	str	r3, [r0, r1]	@ clear flow controller halt status
+	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	str	r3, [r0, r2]	@ clear event & interrupt status
+	dsb
+	mov	pc, lr
+ENDPROC(tegra_cpu_wfi)
+
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index ff9e6b6..1976e93 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1143,15 +1143,35 @@
 
 static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate)
 {
-	long new_rate = rate;
+	long emc_rate;
+	long clk_rate;
 
-	new_rate = tegra_emc_round_rate(new_rate);
-	if (new_rate < 0)
+	/*
+	 * The slowest entry in the EMC clock table that is at least as
+	 * fast as rate.
+	 */
+	emc_rate = tegra_emc_round_rate(rate);
+	if (emc_rate < 0)
 		return c->max_rate;
 
-	BUG_ON(new_rate != tegra2_periph_clk_round_rate(c, new_rate));
+	/*
+	 * The fastest rate the PLL will generate that is at most the
+	 * requested rate.
+	 */
+	clk_rate = tegra2_periph_clk_round_rate(c, emc_rate);
 
-	return new_rate;
+	/*
+	 * If this fails, and emc_rate > clk_rate, it's because the maximum
+	 * rate in the EMC tables is larger than the maximum rate of the EMC
+	 * clock. The EMC clock's max rate is the rate it was running when the
+	 * kernel booted. Such a mismatch is probably due to using the wrong
+	 * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
+	 */
+	WARN_ONCE(emc_rate != clk_rate,
+		"emc_rate %ld != clk_rate %ld",
+		emc_rate, clk_rate);
+
+	return emc_rate;
 }
 
 static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate)
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
new file mode 100644
index 0000000..6d08b53
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -0,0 +1,3099 @@
+/*
+ * arch/arm/mach-tegra/tegra30_clocks.c
+ *
+ * Copyright (c) 2010-2011 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+#include "fuse.h"
+
+#define USE_PLL_LOCK_BITS 0
+
+#define RST_DEVICES_L			0x004
+#define RST_DEVICES_H			0x008
+#define RST_DEVICES_U			0x00C
+#define RST_DEVICES_V			0x358
+#define RST_DEVICES_W			0x35C
+#define RST_DEVICES_SET_L		0x300
+#define RST_DEVICES_CLR_L		0x304
+#define RST_DEVICES_SET_V		0x430
+#define RST_DEVICES_CLR_V		0x434
+#define RST_DEVICES_NUM			5
+
+#define CLK_OUT_ENB_L			0x010
+#define CLK_OUT_ENB_H			0x014
+#define CLK_OUT_ENB_U			0x018
+#define CLK_OUT_ENB_V			0x360
+#define CLK_OUT_ENB_W			0x364
+#define CLK_OUT_ENB_SET_L		0x320
+#define CLK_OUT_ENB_CLR_L		0x324
+#define CLK_OUT_ENB_SET_V		0x440
+#define CLK_OUT_ENB_CLR_V		0x444
+#define CLK_OUT_ENB_NUM			5
+
+#define RST_DEVICES_V_SWR_CPULP_RST_DIS	(0x1 << 1)
+#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN	(0x1 << 1)
+
+#define PERIPH_CLK_TO_BIT(c)		(1 << (c->u.periph.clk_num % 32))
+#define PERIPH_CLK_TO_RST_REG(c)	\
+	periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4)
+#define PERIPH_CLK_TO_RST_SET_REG(c)	\
+	periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8)
+#define PERIPH_CLK_TO_RST_CLR_REG(c)	\
+	periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8)
+
+#define PERIPH_CLK_TO_ENB_REG(c)	\
+	periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c)	\
+	periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8)
+#define PERIPH_CLK_TO_ENB_CLR_REG(c)	\
+	periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8)
+
+#define CLK_MASK_ARM			0x44
+#define MISC_CLK_ENB			0x48
+
+#define OSC_CTRL			0x50
+#define OSC_CTRL_OSC_FREQ_MASK		(0xF<<28)
+#define OSC_CTRL_OSC_FREQ_13MHZ		(0x0<<28)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ	(0x4<<28)
+#define OSC_CTRL_OSC_FREQ_12MHZ		(0x8<<28)
+#define OSC_CTRL_OSC_FREQ_26MHZ		(0xC<<28)
+#define OSC_CTRL_OSC_FREQ_16_8MHZ	(0x1<<28)
+#define OSC_CTRL_OSC_FREQ_38_4MHZ	(0x5<<28)
+#define OSC_CTRL_OSC_FREQ_48MHZ		(0x9<<28)
+#define OSC_CTRL_MASK			(0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK	(3<<26)
+#define OSC_CTRL_PLL_REF_DIV_1		(0<<26)
+#define OSC_CTRL_PLL_REF_DIV_2		(1<<26)
+#define OSC_CTRL_PLL_REF_DIV_4		(2<<26)
+
+#define OSC_FREQ_DET			0x58
+#define OSC_FREQ_DET_TRIG		(1<<31)
+
+#define OSC_FREQ_DET_STATUS		0x5C
+#define OSC_FREQ_DET_BUSY		(1<<31)
+#define OSC_FREQ_DET_CNT_MASK		0xFFFF
+
+#define PERIPH_CLK_SOURCE_I2S1		0x100
+#define PERIPH_CLK_SOURCE_EMC		0x19c
+#define PERIPH_CLK_SOURCE_OSC		0x1fc
+#define PERIPH_CLK_SOURCE_NUM1 \
+	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
+
+#define PERIPH_CLK_SOURCE_G3D2		0x3b0
+#define PERIPH_CLK_SOURCE_SE		0x42c
+#define PERIPH_CLK_SOURCE_NUM2 \
+	((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1)
+
+#define AUDIO_DLY_CLK			0x49c
+#define AUDIO_SYNC_CLK_SPDIF		0x4b4
+#define PERIPH_CLK_SOURCE_NUM3 \
+	((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1)
+
+#define PERIPH_CLK_SOURCE_NUM		(PERIPH_CLK_SOURCE_NUM1 + \
+					 PERIPH_CLK_SOURCE_NUM2 + \
+					 PERIPH_CLK_SOURCE_NUM3)
+
+#define CPU_SOFTRST_CTRL		0x380
+
+#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
+#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
+#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT	8
+#define PERIPH_CLK_SOURCE_DIVIDLE_VAL	50
+#define PERIPH_CLK_UART_DIV_ENB		(1<<24)
+#define PERIPH_CLK_VI_SEL_EX_SHIFT	24
+#define PERIPH_CLK_VI_SEL_EX_MASK	(0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT)
+#define PERIPH_CLK_NAND_DIV_EX_ENB	(1<<8)
+#define PERIPH_CLK_DTV_POLARITY_INV	(1<<25)
+
+#define AUDIO_SYNC_SOURCE_MASK		0x0F
+#define AUDIO_SYNC_DISABLE_BIT		0x10
+#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c)	((c->reg_shift - 24) * 4)
+
+#define PLL_BASE			0x0
+#define PLL_BASE_BYPASS			(1<<31)
+#define PLL_BASE_ENABLE			(1<<30)
+#define PLL_BASE_REF_ENABLE		(1<<29)
+#define PLL_BASE_OVERRIDE		(1<<28)
+#define PLL_BASE_LOCK			(1<<27)
+#define PLL_BASE_DIVP_MASK		(0x7<<20)
+#define PLL_BASE_DIVP_SHIFT		20
+#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT		8
+#define PLL_BASE_DIVM_MASK		(0x1F)
+#define PLL_BASE_DIVM_SHIFT		0
+
+#define PLL_OUT_RATIO_MASK		(0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT		8
+#define PLL_OUT_OVERRIDE		(1<<2)
+#define PLL_OUT_CLKEN			(1<<1)
+#define PLL_OUT_RESET_DISABLE		(1<<0)
+
+#define PLL_MISC(c)			\
+	(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+#define PLL_MISC_LOCK_ENABLE(c)	\
+	(((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18))
+
+#define PLL_MISC_DCCON_SHIFT		20
+#define PLL_MISC_CPCON_SHIFT		8
+#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT		4
+#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT		0
+#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
+#define PLLD_MISC_CLKENABLE		(1<<30)
+
+#define PLLU_BASE_POST_DIV		(1<<20)
+
+#define PLLD_BASE_DSIB_MUX_SHIFT	25
+#define PLLD_BASE_DSIB_MUX_MASK		(1<<PLLD_BASE_DSIB_MUX_SHIFT)
+#define PLLD_BASE_CSI_CLKENABLE		(1<<26)
+#define PLLD_MISC_DSI_CLKENABLE		(1<<30)
+#define PLLD_MISC_DIV_RST		(1<<23)
+#define PLLD_MISC_DCCON_SHIFT		12
+
+#define PLLDU_LFCON_SET_DIVN		600
+
+/* FIXME: OUT_OF_TABLE_CPCON per pll */
+#define OUT_OF_TABLE_CPCON		0x8
+
+#define SUPER_CLK_MUX			0x00
+#define SUPER_STATE_SHIFT		28
+#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
+#define SUPER_LP_DIV2_BYPASS		(0x1 << 16)
+#define SUPER_SOURCE_MASK		0xF
+#define	SUPER_FIQ_SOURCE_SHIFT		12
+#define	SUPER_IRQ_SOURCE_SHIFT		8
+#define	SUPER_RUN_SOURCE_SHIFT		4
+#define	SUPER_IDLE_SOURCE_SHIFT		0
+
+#define SUPER_CLK_DIVIDER		0x04
+#define SUPER_CLOCK_DIV_U71_SHIFT	16
+#define SUPER_CLOCK_DIV_U71_MASK	(0xff << SUPER_CLOCK_DIV_U71_SHIFT)
+/* guarantees safe cpu backup */
+#define SUPER_CLOCK_DIV_U71_MIN		0x2
+
+#define BUS_CLK_DISABLE			(1<<3)
+#define BUS_CLK_DIV_MASK		0x3
+
+#define PMC_CTRL			0x0
+ #define PMC_CTRL_BLINK_ENB		(1 << 7)
+
+#define PMC_DPD_PADS_ORIDE		0x1c
+ #define PMC_DPD_PADS_ORIDE_BLINK_ENB	(1 << 20)
+
+#define PMC_BLINK_TIMER_DATA_ON_SHIFT	0
+#define PMC_BLINK_TIMER_DATA_ON_MASK	0x7fff
+#define PMC_BLINK_TIMER_ENB		(1 << 15)
+#define PMC_BLINK_TIMER_DATA_OFF_SHIFT	16
+#define PMC_BLINK_TIMER_DATA_OFF_MASK	0xffff
+
+#define PMC_PLLP_WB0_OVERRIDE				0xf8
+#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE		(1 << 12)
+
+#define UTMIP_PLL_CFG2					0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x)			(((x) & 0xfff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x)		(((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN	(1 << 0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN	(1 << 2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN	(1 << 4)
+
+#define UTMIP_PLL_CFG1					0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x)		(((x) & 0x1f) << 27)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN	(1 << 14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN	(1 << 12)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN		(1 << 16)
+
+#define PLLE_BASE_CML_ENABLE		(1<<31)
+#define PLLE_BASE_ENABLE		(1<<30)
+#define PLLE_BASE_DIVCML_SHIFT		24
+#define PLLE_BASE_DIVCML_MASK		(0xf<<PLLE_BASE_DIVCML_SHIFT)
+#define PLLE_BASE_DIVP_SHIFT		16
+#define PLLE_BASE_DIVP_MASK		(0x3f<<PLLE_BASE_DIVP_SHIFT)
+#define PLLE_BASE_DIVN_SHIFT		8
+#define PLLE_BASE_DIVN_MASK		(0xFF<<PLLE_BASE_DIVN_SHIFT)
+#define PLLE_BASE_DIVM_SHIFT		0
+#define PLLE_BASE_DIVM_MASK		(0xFF<<PLLE_BASE_DIVM_SHIFT)
+#define PLLE_BASE_DIV_MASK		\
+	(PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \
+	 PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK)
+#define PLLE_BASE_DIV(m, n, p, cml)		\
+	 (((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \
+	  ((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT))
+
+#define PLLE_MISC_SETUP_BASE_SHIFT	16
+#define PLLE_MISC_SETUP_BASE_MASK	(0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT)
+#define PLLE_MISC_READY			(1<<15)
+#define PLLE_MISC_LOCK			(1<<11)
+#define PLLE_MISC_LOCK_ENABLE		(1<<9)
+#define PLLE_MISC_SETUP_EX_SHIFT	2
+#define PLLE_MISC_SETUP_EX_MASK		(0x3<<PLLE_MISC_SETUP_EX_SHIFT)
+#define PLLE_MISC_SETUP_MASK		\
+	  (PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK)
+#define PLLE_MISC_SETUP_VALUE		\
+	  ((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT))
+
+#define PLLE_SS_CTRL			0x68
+#define	PLLE_SS_INCINTRV_SHIFT		24
+#define	PLLE_SS_INCINTRV_MASK		(0x3f<<PLLE_SS_INCINTRV_SHIFT)
+#define	PLLE_SS_INC_SHIFT		16
+#define	PLLE_SS_INC_MASK		(0xff<<PLLE_SS_INC_SHIFT)
+#define	PLLE_SS_MAX_SHIFT		0
+#define	PLLE_SS_MAX_MASK		(0x1ff<<PLLE_SS_MAX_SHIFT)
+#define PLLE_SS_COEFFICIENTS_MASK	\
+	(PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK)
+#define PLLE_SS_COEFFICIENTS_12MHZ	\
+	((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \
+	 (0x24<<PLLE_SS_MAX_SHIFT))
+#define PLLE_SS_DISABLE			((1<<12) | (1<<11) | (1<<10))
+
+#define PLLE_AUX			0x48c
+#define PLLE_AUX_PLLP_SEL		(1<<2)
+#define PLLE_AUX_CML_SATA_ENABLE	(1<<1)
+#define PLLE_AUX_CML_PCIE_ENABLE	(1<<0)
+
+#define	PMC_SATA_PWRGT			0x1ac
+#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE	(1<<5)
+#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL	(1<<4)
+
+#define ROUND_DIVIDER_UP	0
+#define ROUND_DIVIDER_DOWN	1
+
+/* FIXME: recommended safety delay after lock is detected */
+#define PLL_POST_LOCK_DELAY		100
+
+/**
+* Structure defining the fields for USB UTMI clocks Parameters.
+*/
+struct utmi_clk_param {
+	/* Oscillator Frequency in KHz */
+	u32 osc_frequency;
+	/* UTMIP PLL Enable Delay Count  */
+	u8 enable_delay_count;
+	/* UTMIP PLL Stable count */
+	u8 stable_count;
+	/*  UTMIP PLL Active delay count */
+	u8 active_delay_count;
+	/* UTMIP PLL Xtal frequency count */
+	u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+	{
+		.osc_frequency = 13000000,
+		.enable_delay_count = 0x02,
+		.stable_count = 0x33,
+		.active_delay_count = 0x05,
+		.xtal_freq_count = 0x7F
+	},
+	{
+		.osc_frequency = 19200000,
+		.enable_delay_count = 0x03,
+		.stable_count = 0x4B,
+		.active_delay_count = 0x06,
+		.xtal_freq_count = 0xBB},
+	{
+		.osc_frequency = 12000000,
+		.enable_delay_count = 0x02,
+		.stable_count = 0x2F,
+		.active_delay_count = 0x04,
+		.xtal_freq_count = 0x76
+	},
+	{
+		.osc_frequency = 26000000,
+		.enable_delay_count = 0x04,
+		.stable_count = 0x66,
+		.active_delay_count = 0x09,
+		.xtal_freq_count = 0xFE
+	},
+	{
+		.osc_frequency = 16800000,
+		.enable_delay_count = 0x03,
+		.stable_count = 0x41,
+		.active_delay_count = 0x0A,
+		.xtal_freq_count = 0xA4
+	},
+};
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
+static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE);
+
+#define MISC_GP_HIDREV                  0x804
+
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, ... CLK_ENABLE_W
+ */
+static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
+
+#define clk_writel(value, reg) \
+	__raw_writel(value, (u32)reg_clk_base + (reg))
+#define clk_readl(reg) \
+	__raw_readl((u32)reg_clk_base + (reg))
+#define pmc_writel(value, reg) \
+	__raw_writel(value, (u32)reg_pmc_base + (reg))
+#define pmc_readl(reg) \
+	__raw_readl((u32)reg_pmc_base + (reg))
+#define chipid_readl() \
+	__raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV)
+
+#define clk_writel_delay(value, reg)					\
+	do {								\
+		__raw_writel((value), (u32)reg_clk_base + (reg));	\
+		udelay(2);						\
+	} while (0)
+
+
+static inline int clk_set_div(struct clk *c, u32 n)
+{
+	return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n);
+}
+
+static inline u32 periph_clk_to_reg(
+	struct clk *c, u32 reg_L, u32 reg_V, int offs)
+{
+	u32 reg = c->u.periph.clk_num / 32;
+	BUG_ON(reg >= RST_DEVICES_NUM);
+	if (reg < 3)
+		reg = reg_L + (reg * offs);
+	else
+		reg = reg_V + ((reg - 3) * offs);
+	return reg;
+}
+
+static unsigned long clk_measure_input_freq(void)
+{
+	u32 clock_autodetect;
+	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+		return 12000000;
+	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+		return 13000000;
+	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+		return 19200000;
+	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+		return 26000000;
+	} else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) {
+		return 16800000;
+	} else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) {
+		return 38400000;
+	} else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) {
+		return 48000000;
+	} else {
+		pr_err("%s: Unexpected clock autodetect value %d", __func__,
+			clock_autodetect);
+		BUG();
+		return 0;
+	}
+}
+
+static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate,
+				 u32 flags, u32 round_mode)
+{
+	s64 divider_u71 = parent_rate;
+	if (!rate)
+		return -EINVAL;
+
+	if (!(flags & DIV_U71_INT))
+		divider_u71 *= 2;
+	if (round_mode == ROUND_DIVIDER_UP)
+		divider_u71 += rate - 1;
+	do_div(divider_u71, rate);
+	if (flags & DIV_U71_INT)
+		divider_u71 *= 2;
+
+	if (divider_u71 - 2 < 0)
+		return 0;
+
+	if (divider_u71 - 2 > 255)
+		return -EINVAL;
+
+	return divider_u71 - 2;
+}
+
+static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+	s64 divider_u16;
+
+	divider_u16 = parent_rate;
+	if (!rate)
+		return -EINVAL;
+	divider_u16 += rate - 1;
+	do_div(divider_u16, rate);
+
+	if (divider_u16 - 1 < 0)
+		return 0;
+
+	if (divider_u16 - 1 > 0xFFFF)
+		return -EINVAL;
+
+	return divider_u16 - 1;
+}
+
+/* clk_m functions */
+static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
+{
+	u32 osc_ctrl = clk_readl(OSC_CTRL);
+	u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
+	u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
+
+	c->rate = clk_measure_input_freq();
+	switch (c->rate) {
+	case 12000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+		break;
+	case 13000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+		break;
+	case 19200000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+		break;
+	case 26000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+		break;
+	case 16800000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+		break;
+	case 38400000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
+		break;
+	case 48000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ;
+		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
+		break;
+	default:
+		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+		BUG();
+	}
+	clk_writel(auto_clock_control, OSC_CTRL);
+	return c->rate;
+}
+
+static void tegra30_clk_m_init(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	tegra30_clk_m_autodetect_rate(c);
+}
+
+static int tegra30_clk_m_enable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	return 0;
+}
+
+static void tegra30_clk_m_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	WARN(1, "Attempting to disable main SoC clock\n");
+}
+
+static struct clk_ops tegra_clk_m_ops = {
+	.init		= tegra30_clk_m_init,
+	.enable		= tegra30_clk_m_enable,
+	.disable	= tegra30_clk_m_disable,
+};
+
+static struct clk_ops tegra_clk_m_div_ops = {
+	.enable		= tegra30_clk_m_enable,
+};
+
+/* PLL reference divider functions */
+static void tegra30_pll_ref_init(struct clk *c)
+{
+	u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	switch (pll_ref_div) {
+	case OSC_CTRL_PLL_REF_DIV_1:
+		c->div = 1;
+		break;
+	case OSC_CTRL_PLL_REF_DIV_2:
+		c->div = 2;
+		break;
+	case OSC_CTRL_PLL_REF_DIV_4:
+		c->div = 4;
+		break;
+	default:
+		pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div);
+		BUG();
+	}
+	c->mul = 1;
+	c->state = ON;
+}
+
+static struct clk_ops tegra_pll_ref_ops = {
+	.init		= tegra30_pll_ref_init,
+	.enable		= tegra30_clk_m_enable,
+	.disable	= tegra30_clk_m_disable,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and
+ * clock skipping super divider.  We will ignore the clock skipping divider,
+ * since we can't lower the voltage when using the clock skip, but we can if
+ * we lower the PLL frequency. We will use 7.1 divider for CPU super-clock
+ * only when its parent is a fixed rate PLL, since we can't change PLL rate
+ * in this case.
+ */
+static void tegra30_super_clk_init(struct clk *c)
+{
+	u32 val;
+	int source;
+	int shift;
+	const struct clk_mux_sel *sel;
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	c->state = ON;
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	source = (val >> shift) & SUPER_SOURCE_MASK;
+	if (c->flags & DIV_2)
+		source |= val & SUPER_LP_DIV2_BYPASS;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->value == source)
+			break;
+	}
+	BUG_ON(sel->input == NULL);
+	c->parent = sel->input;
+
+	if (c->flags & DIV_U71) {
+		/* Init safe 7.1 divider value (does not affect PLLX path) */
+		clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
+			   c->reg + SUPER_CLK_DIVIDER);
+		c->mul = 2;
+		c->div = 2;
+		if (!(c->parent->flags & PLLX))
+			c->div += SUPER_CLOCK_DIV_U71_MIN;
+	} else
+		clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+}
+
+static int tegra30_super_clk_enable(struct clk *c)
+{
+	return 0;
+}
+
+static void tegra30_super_clk_disable(struct clk *c)
+{
+	/* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and
+	   geared up g-mode super clock - mode switch may request to disable
+	   either of them; accept request with no affect on h/w */
+}
+
+static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	int shift;
+
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			/* For LP mode super-clock switch between PLLX direct
+			   and divided-by-2 outputs is allowed only when other
+			   than PLLX clock source is current parent */
+			if ((c->flags & DIV_2) && (p->flags & PLLX) &&
+			    ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) {
+				if (c->parent->flags & PLLX)
+					return -EINVAL;
+				val ^= SUPER_LP_DIV2_BYPASS;
+				clk_writel_delay(val, c->reg);
+			}
+			val &= ~(SUPER_SOURCE_MASK << shift);
+			val |= (sel->value & SUPER_SOURCE_MASK) << shift;
+
+			/* 7.1 divider for CPU super-clock does not affect
+			   PLLX path */
+			if (c->flags & DIV_U71) {
+				u32 div = 0;
+				if (!(p->flags & PLLX)) {
+					div = clk_readl(c->reg +
+							SUPER_CLK_DIVIDER);
+					div &= SUPER_CLOCK_DIV_U71_MASK;
+					div >>= SUPER_CLOCK_DIV_U71_SHIFT;
+				}
+				c->div = div + 2;
+				c->mul = 2;
+			}
+
+			if (c->refcnt)
+				clk_enable(p);
+
+			clk_writel_delay(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+/*
+ * Do not use super clocks "skippers", since dividing using a clock skipper
+ * does not allow the voltage to be scaled down. Instead adjust the rate of
+ * the parent clock. This requires that the parent of a super clock have no
+ * other children, otherwise the rate will change underneath the other
+ * children. Special case: if fixed rate PLL is CPU super clock parent the
+ * rate of this PLL can't be changed, and it has many other children. In
+ * this case use 7.1 fractional divider to adjust the super clock rate.
+ */
+static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) {
+		int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate,
+					rate, c->flags, ROUND_DIVIDER_DOWN);
+		div = max(div, SUPER_CLOCK_DIV_U71_MIN);
+
+		clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT,
+			   c->reg + SUPER_CLK_DIVIDER);
+		c->div = div + 2;
+		c->mul = 2;
+		return 0;
+	}
+	return clk_set_rate(c->parent, rate);
+}
+
+static struct clk_ops tegra_super_ops = {
+	.init			= tegra30_super_clk_init,
+	.enable			= tegra30_super_clk_enable,
+	.disable		= tegra30_super_clk_disable,
+	.set_parent		= tegra30_super_clk_set_parent,
+	.set_rate		= tegra30_super_clk_set_rate,
+};
+
+static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	/* The input value 'rate' is the clock rate of the CPU complex. */
+	c->rate = (rate * c->mul) / c->div;
+	return 0;
+}
+
+static struct clk_ops tegra30_twd_ops = {
+	.set_rate	= tegra30_twd_clk_set_rate,
+};
+
+/* Blink output functions */
+
+static void tegra30_blink_clk_init(struct clk *c)
+{
+	u32 val;
+
+	val = pmc_readl(PMC_CTRL);
+	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
+	c->mul = 1;
+	val = pmc_readl(c->reg);
+
+	if (val & PMC_BLINK_TIMER_ENB) {
+		unsigned int on_off;
+
+		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+			PMC_BLINK_TIMER_DATA_ON_MASK;
+		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+		on_off += val;
+		/* each tick in the blink timer is 4 32KHz clocks */
+		c->div = on_off * 4;
+	} else {
+		c->div = 1;
+	}
+}
+
+static int tegra30_blink_clk_enable(struct clk *c)
+{
+	u32 val;
+
+	val = pmc_readl(PMC_DPD_PADS_ORIDE);
+	pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+
+	val = pmc_readl(PMC_CTRL);
+	pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+	return 0;
+}
+
+static void tegra30_blink_clk_disable(struct clk *c)
+{
+	u32 val;
+
+	val = pmc_readl(PMC_CTRL);
+	pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+	val = pmc_readl(PMC_DPD_PADS_ORIDE);
+	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+}
+
+static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(c->parent);
+	if (rate >= parent_rate) {
+		c->div = 1;
+		pmc_writel(0, c->reg);
+	} else {
+		unsigned int on_off;
+		u32 val;
+
+		on_off = DIV_ROUND_UP(parent_rate / 8, rate);
+		c->div = on_off * 8;
+
+		val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
+			PMC_BLINK_TIMER_DATA_ON_SHIFT;
+		on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+		on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+		val |= on_off;
+		val |= PMC_BLINK_TIMER_ENB;
+		pmc_writel(val, c->reg);
+	}
+
+	return 0;
+}
+
+static struct clk_ops tegra_blink_clk_ops = {
+	.init			= &tegra30_blink_clk_init,
+	.enable			= &tegra30_blink_clk_enable,
+	.disable		= &tegra30_blink_clk_disable,
+	.set_rate		= &tegra30_blink_clk_set_rate,
+};
+
+/* PLL Functions */
+static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg,
+					 u32 lock_bit)
+{
+#if USE_PLL_LOCK_BITS
+	int i;
+	for (i = 0; i < c->u.pll.lock_delay; i++) {
+		if (clk_readl(lock_reg) & lock_bit) {
+			udelay(PLL_POST_LOCK_DELAY);
+			return 0;
+		}
+		udelay(2);		/* timeout = 2 * lock time */
+	}
+	pr_err("Timed out waiting for lock bit on pll %s", c->name);
+	return -1;
+#endif
+	udelay(c->u.pll.lock_delay);
+
+	return 0;
+}
+
+
+static void tegra30_utmi_param_configure(struct clk *c)
+{
+	u32 reg;
+	int i;
+	unsigned long main_rate =
+		clk_get_rate(c->parent->parent);
+
+	for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+		if (main_rate == utmi_parameters[i].osc_frequency)
+			break;
+	}
+
+	if (i >= ARRAY_SIZE(utmi_parameters)) {
+		pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate);
+		return;
+	}
+
+	reg = clk_readl(UTMIP_PLL_CFG2);
+
+	/* Program UTMIP PLL stable and active counts */
+	/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
+	reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+	reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
+			utmi_parameters[i].stable_count);
+
+	reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+	reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
+			utmi_parameters[i].active_delay_count);
+
+	/* Remove power downs from UTMIP PLL control bits */
+	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+	clk_writel(reg, UTMIP_PLL_CFG2);
+
+	/* Program UTMIP PLL delay and oscillator frequency counts */
+	reg = clk_readl(UTMIP_PLL_CFG1);
+	reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+	reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
+		utmi_parameters[i].enable_delay_count);
+
+	reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+	reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
+		utmi_parameters[i].xtal_freq_count);
+
+	/* Remove power downs from UTMIP PLL control bits */
+	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+	reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+
+	clk_writel(reg, UTMIP_PLL_CFG1);
+}
+
+static void tegra30_pll_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg + PLL_BASE);
+
+	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+
+	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+		const struct clk_pll_freq_table *sel;
+		unsigned long input_rate = clk_get_rate(c->parent);
+		for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+			if (sel->input_rate == input_rate &&
+				sel->output_rate == c->u.pll.fixed_rate) {
+				c->mul = sel->n;
+				c->div = sel->m * sel->p;
+				return;
+			}
+		}
+		pr_err("Clock %s has unknown fixed frequency\n", c->name);
+		BUG();
+	} else if (val & PLL_BASE_BYPASS) {
+		c->mul = 1;
+		c->div = 1;
+	} else {
+		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+		if (c->flags & PLLU)
+			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+		else
+			c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
+					PLL_BASE_DIVP_SHIFT));
+		if (c->flags & PLL_FIXED) {
+			unsigned long rate = clk_get_rate_locked(c);
+			BUG_ON(rate != c->u.pll.fixed_rate);
+		}
+	}
+
+	if (c->flags & PLLU)
+		tegra30_utmi_param_configure(c);
+}
+
+static int tegra30_pll_clk_enable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+#if USE_PLL_LOCK_BITS
+	val = clk_readl(c->reg + PLL_MISC(c));
+	val |= PLL_MISC_LOCK_ENABLE(c);
+	clk_writel(val, c->reg + PLL_MISC(c));
+#endif
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~PLL_BASE_BYPASS;
+	val |= PLL_BASE_ENABLE;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	if (c->flags & PLLM) {
+		val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
+		val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+		pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
+	}
+
+	tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK);
+
+	return 0;
+}
+
+static void tegra30_pll_clk_disable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg);
+	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+	clk_writel(val, c->reg);
+
+	if (c->flags & PLLM) {
+		val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
+		val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+		pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
+	}
+}
+
+static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val, p_div, old_base;
+	unsigned long input_rate;
+	const struct clk_pll_freq_table *sel;
+	struct clk_pll_freq_table cfg;
+
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (c->flags & PLL_FIXED) {
+		int ret = 0;
+		if (rate != c->u.pll.fixed_rate) {
+			pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
+			       __func__, c->name, c->u.pll.fixed_rate, rate);
+			ret = -EINVAL;
+		}
+		return ret;
+	}
+
+	if (c->flags & PLLM) {
+		if (rate != clk_get_rate_locked(c)) {
+			pr_err("%s: Can not change memory %s rate in flight\n",
+			       __func__, c->name);
+			return -EINVAL;
+		}
+		return 0;
+	}
+
+	p_div = 0;
+	input_rate = clk_get_rate(c->parent);
+
+	/* Check if the target rate is tabulated */
+	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			if (c->flags & PLLU) {
+				BUG_ON(sel->p < 1 || sel->p > 2);
+				if (sel->p == 1)
+					p_div = PLLU_BASE_POST_DIV;
+			} else {
+				BUG_ON(sel->p < 1);
+				for (val = sel->p; val > 1; val >>= 1)
+					p_div++;
+				p_div <<= PLL_BASE_DIVP_SHIFT;
+			}
+			break;
+		}
+	}
+
+	/* Configure out-of-table rate */
+	if (sel->input_rate == 0) {
+		unsigned long cfreq;
+		BUG_ON(c->flags & PLLU);
+		sel = &cfg;
+
+		switch (input_rate) {
+		case 12000000:
+		case 26000000:
+			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
+			break;
+		case 13000000:
+			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
+			break;
+		case 16800000:
+		case 19200000:
+			cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
+			break;
+		default:
+			pr_err("%s: Unexpected reference rate %lu\n",
+			       __func__, input_rate);
+			BUG();
+		}
+
+		/* Raise VCO to guarantee 0.5% accuracy */
+		for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
+		      cfg.output_rate <<= 1)
+			p_div++;
+
+		cfg.p = 0x1 << p_div;
+		cfg.m = input_rate / cfreq;
+		cfg.n = cfg.output_rate / cfreq;
+		cfg.cpcon = OUT_OF_TABLE_CPCON;
+
+		if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) ||
+		    (cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) ||
+		    (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
+		    (cfg.output_rate > c->u.pll.vco_max)) {
+			pr_err("%s: Failed to set %s out-of-table rate %lu\n",
+			       __func__, c->name, rate);
+			return -EINVAL;
+		}
+		p_div <<= PLL_BASE_DIVP_SHIFT;
+	}
+
+	c->mul = sel->n;
+	c->div = sel->m * sel->p;
+
+	old_base = val = clk_readl(c->reg + PLL_BASE);
+	val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK |
+		 ((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK));
+	val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
+		(sel->n << PLL_BASE_DIVN_SHIFT) | p_div;
+	if (val == old_base)
+		return 0;
+
+	if (c->state == ON) {
+		tegra30_pll_clk_disable(c);
+		val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+	}
+	clk_writel(val, c->reg + PLL_BASE);
+
+	if (c->flags & PLL_HAS_CPCON) {
+		val = clk_readl(c->reg + PLL_MISC(c));
+		val &= ~PLL_MISC_CPCON_MASK;
+		val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
+		if (c->flags & (PLLU | PLLD)) {
+			val &= ~PLL_MISC_LFCON_MASK;
+			if (sel->n >= PLLDU_LFCON_SET_DIVN)
+				val |= 0x1 << PLL_MISC_LFCON_SHIFT;
+		} else if (c->flags & (PLLX | PLLM)) {
+			val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
+			if (rate >= (c->u.pll.vco_max >> 1))
+				val |= 0x1 << PLL_MISC_DCCON_SHIFT;
+		}
+		clk_writel(val, c->reg + PLL_MISC(c));
+	}
+
+	if (c->state == ON)
+		tegra30_pll_clk_enable(c);
+
+	return 0;
+}
+
+static struct clk_ops tegra_pll_ops = {
+	.init			= tegra30_pll_clk_init,
+	.enable			= tegra30_pll_clk_enable,
+	.disable		= tegra30_pll_clk_disable,
+	.set_rate		= tegra30_pll_clk_set_rate,
+};
+
+static int
+tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+	u32 val, mask, reg;
+
+	switch (p) {
+	case TEGRA_CLK_PLLD_CSI_OUT_ENB:
+		mask = PLLD_BASE_CSI_CLKENABLE;
+		reg = c->reg + PLL_BASE;
+		break;
+	case TEGRA_CLK_PLLD_DSI_OUT_ENB:
+		mask = PLLD_MISC_DSI_CLKENABLE;
+		reg = c->reg + PLL_MISC(c);
+		break;
+	case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
+		if (!(c->flags & PLL_ALT_MISC_REG)) {
+			mask = PLLD_BASE_DSIB_MUX_MASK;
+			reg = c->reg + PLL_BASE;
+			break;
+		}
+	/* fall through - error since PLLD2 does not have MUX_SEL control */
+	default:
+		return -EINVAL;
+	}
+
+	val = clk_readl(reg);
+	if (setting)
+		val |= mask;
+	else
+		val &= ~mask;
+	clk_writel(val, reg);
+	return 0;
+}
+
+static struct clk_ops tegra_plld_ops = {
+	.init			= tegra30_pll_clk_init,
+	.enable			= tegra30_pll_clk_enable,
+	.disable		= tegra30_pll_clk_disable,
+	.set_rate		= tegra30_pll_clk_set_rate,
+	.clk_cfg_ex		= tegra30_plld_clk_cfg_ex,
+};
+
+static void tegra30_plle_clk_init(struct clk *c)
+{
+	u32 val;
+
+	val = clk_readl(PLLE_AUX);
+	c->parent = (val & PLLE_AUX_PLLP_SEL) ?
+		tegra_get_clock_by_name("pll_p") :
+		tegra_get_clock_by_name("pll_ref");
+
+	val = clk_readl(c->reg + PLL_BASE);
+	c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
+	c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
+	c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
+	c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
+}
+
+static void tegra30_plle_clk_disable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
+	clk_writel(val, c->reg + PLL_BASE);
+}
+
+static void tegra30_plle_training(struct clk *c)
+{
+	u32 val;
+
+	/* PLLE is already disabled, and setup cleared;
+	 * create falling edge on PLLE IDDQ input */
+	val = pmc_readl(PMC_SATA_PWRGT);
+	val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+	pmc_writel(val, PMC_SATA_PWRGT);
+
+	val = pmc_readl(PMC_SATA_PWRGT);
+	val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+	pmc_writel(val, PMC_SATA_PWRGT);
+
+	val = pmc_readl(PMC_SATA_PWRGT);
+	val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+	pmc_writel(val, PMC_SATA_PWRGT);
+
+	do {
+		val = clk_readl(c->reg + PLL_MISC(c));
+	} while (!(val & PLLE_MISC_READY));
+}
+
+static int tegra30_plle_configure(struct clk *c, bool force_training)
+{
+	u32 val;
+	const struct clk_pll_freq_table *sel;
+	unsigned long rate = c->u.pll.fixed_rate;
+	unsigned long input_rate = clk_get_rate(c->parent);
+
+	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate)
+			break;
+	}
+
+	if (sel->input_rate == 0)
+		return -ENOSYS;
+
+	/* disable PLLE, clear setup fiels */
+	tegra30_plle_clk_disable(c);
+
+	val = clk_readl(c->reg + PLL_MISC(c));
+	val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
+	clk_writel(val, c->reg + PLL_MISC(c));
+
+	/* training */
+	val = clk_readl(c->reg + PLL_MISC(c));
+	if (force_training || (!(val & PLLE_MISC_READY)))
+		tegra30_plle_training(c);
+
+	/* configure dividers, setup, disable SS */
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~PLLE_BASE_DIV_MASK;
+	val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon);
+	clk_writel(val, c->reg + PLL_BASE);
+	c->mul = sel->n;
+	c->div = sel->m * sel->p;
+
+	val = clk_readl(c->reg + PLL_MISC(c));
+	val |= PLLE_MISC_SETUP_VALUE;
+	val |= PLLE_MISC_LOCK_ENABLE;
+	clk_writel(val, c->reg + PLL_MISC(c));
+
+	val = clk_readl(PLLE_SS_CTRL);
+	val |= PLLE_SS_DISABLE;
+	clk_writel(val, PLLE_SS_CTRL);
+
+	/* enable and lock PLLE*/
+	val = clk_readl(c->reg + PLL_BASE);
+	val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
+	clk_writel(val, c->reg + PLL_BASE);
+
+	tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK);
+
+	return 0;
+}
+
+static int tegra30_plle_clk_enable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	return tegra30_plle_configure(c, !c->set);
+}
+
+static struct clk_ops tegra_plle_ops = {
+	.init			= tegra30_plle_clk_init,
+	.enable			= tegra30_plle_clk_enable,
+	.disable		= tegra30_plle_clk_disable,
+};
+
+/* Clock divider ops */
+static void tegra30_pll_div_clk_init(struct clk *c)
+{
+	if (c->flags & DIV_U71) {
+		u32 divu71;
+		u32 val = clk_readl(c->reg);
+		val >>= c->reg_shift;
+		c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+		if (!(val & PLL_OUT_RESET_DISABLE))
+			c->state = OFF;
+
+		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+		c->div = (divu71 + 2);
+		c->mul = 2;
+	} else if (c->flags & DIV_2) {
+		c->state = ON;
+		if (c->flags & (PLLD | PLLX)) {
+			c->div = 2;
+			c->mul = 1;
+		} else
+			BUG();
+	} else {
+		c->state = ON;
+		c->div = 1;
+		c->mul = 1;
+	}
+}
+
+static int tegra30_pll_div_clk_enable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel_delay(val, c->reg);
+		return 0;
+	} else if (c->flags & DIV_2) {
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void tegra30_pll_div_clk_disable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel_delay(val, c->reg);
+	}
+}
+
+static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	u32 new_val;
+	int divider_u71;
+	unsigned long parent_rate = clk_get_rate(c->parent);
+
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+	if (c->flags & DIV_U71) {
+		divider_u71 = clk_div71_get_divider(
+			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+		if (divider_u71 >= 0) {
+			val = clk_readl(c->reg);
+			new_val = val >> c->reg_shift;
+			new_val &= 0xFFFF;
+			if (c->flags & DIV_U71_FIXED)
+				new_val |= PLL_OUT_OVERRIDE;
+			new_val &= ~PLL_OUT_RATIO_MASK;
+			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+			val &= ~(0xFFFF << c->reg_shift);
+			val |= new_val << c->reg_shift;
+			clk_writel_delay(val, c->reg);
+			c->div = divider_u71 + 2;
+			c->mul = 2;
+			return 0;
+		}
+	} else if (c->flags & DIV_2)
+		return clk_set_rate(c->parent, rate * 2);
+
+	return -EINVAL;
+}
+
+static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
+{
+	int divider;
+	unsigned long parent_rate = clk_get_rate(c->parent);
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(
+			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+		if (divider < 0)
+			return divider;
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+	} else if (c->flags & DIV_2)
+		/* no rounding - fixed DIV_2 dividers pass rate to parent PLL */
+		return rate;
+
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_pll_div_ops = {
+	.init			= tegra30_pll_div_clk_init,
+	.enable			= tegra30_pll_div_clk_enable,
+	.disable		= tegra30_pll_div_clk_disable,
+	.set_rate		= tegra30_pll_div_clk_set_rate,
+	.round_rate		= tegra30_pll_div_clk_round_rate,
+};
+
+/* Periph clk ops */
+static inline u32 periph_clk_source_mask(struct clk *c)
+{
+	if (c->flags & MUX8)
+		return 7 << 29;
+	else if (c->flags & MUX_PWM)
+		return 3 << 28;
+	else if (c->flags & MUX_CLK_OUT)
+		return 3 << (c->u.periph.clk_num + 4);
+	else if (c->flags & PLLD)
+		return PLLD_BASE_DSIB_MUX_MASK;
+	else
+		return 3 << 30;
+}
+
+static inline u32 periph_clk_source_shift(struct clk *c)
+{
+	if (c->flags & MUX8)
+		return 29;
+	else if (c->flags & MUX_PWM)
+		return 28;
+	else if (c->flags & MUX_CLK_OUT)
+		return c->u.periph.clk_num + 4;
+	else if (c->flags & PLLD)
+		return PLLD_BASE_DSIB_MUX_SHIFT;
+	else
+		return 30;
+}
+
+static void tegra30_periph_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	const struct clk_mux_sel *mux = 0;
+	const struct clk_mux_sel *sel;
+	if (c->flags & MUX) {
+		for (sel = c->inputs; sel->input != NULL; sel++) {
+			if (((val & periph_clk_source_mask(c)) >>
+			    periph_clk_source_shift(c)) == sel->value)
+				mux = sel;
+		}
+		BUG_ON(!mux);
+
+		c->parent = mux->input;
+	} else {
+		c->parent = c->inputs[0].input;
+	}
+
+	if (c->flags & DIV_U71) {
+		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+		if ((c->flags & DIV_U71_UART) &&
+		    (!(val & PERIPH_CLK_UART_DIV_ENB))) {
+			divu71 = 0;
+		}
+		if (c->flags & DIV_U71_IDLE) {
+			val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
+				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+			val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
+				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+			clk_writel(val, c->reg);
+		}
+		c->div = divu71 + 2;
+		c->mul = 2;
+	} else if (c->flags & DIV_U16) {
+		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+		c->div = divu16 + 1;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	c->state = ON;
+	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
+		c->state = OFF;
+	if (!(c->flags & PERIPH_NO_RESET))
+		if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
+			c->state = OFF;
+}
+
+static int tegra30_periph_clk_enable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
+		return 0;
+
+	clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (!(c->flags & PERIPH_NO_RESET) &&
+		 !(c->flags & PERIPH_MANUAL_RESET)) {
+		if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) &
+			 PERIPH_CLK_TO_BIT(c)) {
+			udelay(5);	/* reset propagation delay */
+			clk_writel(PERIPH_CLK_TO_BIT(c),
+				 PERIPH_CLK_TO_RST_CLR_REG(c));
+		}
+	}
+	return 0;
+}
+
+static void tegra30_periph_clk_disable(struct clk *c)
+{
+	unsigned long val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	if (c->refcnt)
+		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) {
+		/* If peripheral is in the APB bus then read the APB bus to
+		 * flush the write operation in apb bus. This will avoid the
+		 * peripheral access after disabling clock*/
+		if (c->flags & PERIPH_ON_APB)
+			val = chipid_readl();
+
+		clk_writel_delay(
+			PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
+	}
+}
+
+static void tegra30_periph_clk_reset(struct clk *c, bool assert)
+{
+	unsigned long val;
+	pr_debug("%s %s on clock %s\n", __func__,
+		 assert ? "assert" : "deassert", c->name);
+
+	if (!(c->flags & PERIPH_NO_RESET)) {
+		if (assert) {
+			/* If peripheral is in the APB bus then read the APB
+			 * bus to flush the write operation in apb bus. This
+			 * will avoid the peripheral access after disabling
+			 * clock */
+			if (c->flags & PERIPH_ON_APB)
+				val = chipid_readl();
+
+			clk_writel(PERIPH_CLK_TO_BIT(c),
+				   PERIPH_CLK_TO_RST_SET_REG(c));
+		} else
+			clk_writel(PERIPH_CLK_TO_BIT(c),
+				   PERIPH_CLK_TO_RST_CLR_REG(c));
+	}
+}
+
+static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+	if (!(c->flags & MUX))
+		return (p == c->parent) ? 0 : (-EINVAL);
+
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			val = clk_readl(c->reg);
+			val &= ~periph_clk_source_mask(c);
+			val |= (sel->value << periph_clk_source_shift(c));
+
+			if (c->refcnt)
+				clk_enable(p);
+
+			clk_writel_delay(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	int divider;
+	unsigned long parent_rate = clk_get_rate(c->parent);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(
+			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
+			val |= divider;
+			if (c->flags & DIV_U71_UART) {
+				if (divider)
+					val |= PERIPH_CLK_UART_DIV_ENB;
+				else
+					val &= ~PERIPH_CLK_UART_DIV_ENB;
+			}
+			clk_writel_delay(val, c->reg);
+			c->div = divider + 2;
+			c->mul = 2;
+			return 0;
+		}
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(parent_rate, rate);
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
+			val |= divider;
+			clk_writel_delay(val, c->reg);
+			c->div = divider + 1;
+			c->mul = 1;
+			return 0;
+		}
+	} else if (parent_rate <= rate) {
+		c->div = 1;
+		c->mul = 1;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static long tegra30_periph_clk_round_rate(struct clk *c,
+	unsigned long rate)
+{
+	int divider;
+	unsigned long parent_rate = clk_get_rate(c->parent);
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(
+			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+		if (divider < 0)
+			return divider;
+
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(parent_rate, rate);
+		if (divider < 0)
+			return divider;
+		return DIV_ROUND_UP(parent_rate, divider + 1);
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_periph_clk_ops = {
+	.init			= &tegra30_periph_clk_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_parent		= &tegra30_periph_clk_set_parent,
+	.set_rate		= &tegra30_periph_clk_set_rate,
+	.round_rate		= &tegra30_periph_clk_round_rate,
+	.reset			= &tegra30_periph_clk_reset,
+};
+
+
+/* Periph extended clock configuration ops */
+static int
+tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+	if (p == TEGRA_CLK_VI_INP_SEL) {
+		u32 val = clk_readl(c->reg);
+		val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
+		val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) &
+			PERIPH_CLK_VI_SEL_EX_MASK;
+		clk_writel(val, c->reg);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_vi_clk_ops = {
+	.init			= &tegra30_periph_clk_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_parent		= &tegra30_periph_clk_set_parent,
+	.set_rate		= &tegra30_periph_clk_set_rate,
+	.round_rate		= &tegra30_periph_clk_round_rate,
+	.clk_cfg_ex		= &tegra30_vi_clk_cfg_ex,
+	.reset			= &tegra30_periph_clk_reset,
+};
+
+static int
+tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+	if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
+		u32 val = clk_readl(c->reg);
+		if (setting)
+			val |= PERIPH_CLK_NAND_DIV_EX_ENB;
+		else
+			val &= ~PERIPH_CLK_NAND_DIV_EX_ENB;
+		clk_writel(val, c->reg);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_nand_clk_ops = {
+	.init			= &tegra30_periph_clk_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_parent		= &tegra30_periph_clk_set_parent,
+	.set_rate		= &tegra30_periph_clk_set_rate,
+	.round_rate		= &tegra30_periph_clk_round_rate,
+	.clk_cfg_ex		= &tegra30_nand_clk_cfg_ex,
+	.reset			= &tegra30_periph_clk_reset,
+};
+
+
+static int
+tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+	if (p == TEGRA_CLK_DTV_INVERT) {
+		u32 val = clk_readl(c->reg);
+		if (setting)
+			val |= PERIPH_CLK_DTV_POLARITY_INV;
+		else
+			val &= ~PERIPH_CLK_DTV_POLARITY_INV;
+		clk_writel(val, c->reg);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_dtv_clk_ops = {
+	.init			= &tegra30_periph_clk_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_parent		= &tegra30_periph_clk_set_parent,
+	.set_rate		= &tegra30_periph_clk_set_rate,
+	.round_rate		= &tegra30_periph_clk_round_rate,
+	.clk_cfg_ex		= &tegra30_dtv_clk_cfg_ex,
+	.reset			= &tegra30_periph_clk_reset,
+};
+
+static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p)
+{
+	const struct clk_mux_sel *sel;
+	struct clk *d = tegra_get_clock_by_name("pll_d");
+
+	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			if (c->refcnt)
+				clk_enable(p);
+
+			/* The DSIB parent selection bit is in PLLD base
+			   register - can not do direct r-m-w, must be
+			   protected by PLLD lock */
+			tegra_clk_cfg_ex(
+				d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value);
+
+			if (c->refcnt && c->parent)
+				clk_disable(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_dsib_clk_ops = {
+	.init			= &tegra30_periph_clk_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_parent		= &tegra30_dsib_clk_set_parent,
+	.set_rate		= &tegra30_periph_clk_set_rate,
+	.round_rate		= &tegra30_periph_clk_round_rate,
+	.reset			= &tegra30_periph_clk_reset,
+};
+
+/* pciex clock support only reset function */
+static struct clk_ops tegra_pciex_clk_ops = {
+	.reset    = tegra30_periph_clk_reset,
+};
+
+/* Output clock ops */
+
+static DEFINE_SPINLOCK(clk_out_lock);
+
+static void tegra30_clk_out_init(struct clk *c)
+{
+	const struct clk_mux_sel *mux = 0;
+	const struct clk_mux_sel *sel;
+	u32 val = pmc_readl(c->reg);
+
+	c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
+	c->mul = 1;
+	c->div = 1;
+
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (((val & periph_clk_source_mask(c)) >>
+		     periph_clk_source_shift(c)) == sel->value)
+			mux = sel;
+	}
+	BUG_ON(!mux);
+	c->parent = mux->input;
+}
+
+static int tegra30_clk_out_enable(struct clk *c)
+{
+	u32 val;
+	unsigned long flags;
+
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	spin_lock_irqsave(&clk_out_lock, flags);
+	val = pmc_readl(c->reg);
+	val |= (0x1 << c->u.periph.clk_num);
+	pmc_writel(val, c->reg);
+	spin_unlock_irqrestore(&clk_out_lock, flags);
+
+	return 0;
+}
+
+static void tegra30_clk_out_disable(struct clk *c)
+{
+	u32 val;
+	unsigned long flags;
+
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	spin_lock_irqsave(&clk_out_lock, flags);
+	val = pmc_readl(c->reg);
+	val &= ~(0x1 << c->u.periph.clk_num);
+	pmc_writel(val, c->reg);
+	spin_unlock_irqrestore(&clk_out_lock, flags);
+}
+
+static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	unsigned long flags;
+	const struct clk_mux_sel *sel;
+
+	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			if (c->refcnt)
+				clk_enable(p);
+
+			spin_lock_irqsave(&clk_out_lock, flags);
+			val = pmc_readl(c->reg);
+			val &= ~periph_clk_source_mask(c);
+			val |= (sel->value << periph_clk_source_shift(c));
+			pmc_writel(val, c->reg);
+			spin_unlock_irqrestore(&clk_out_lock, flags);
+
+			if (c->refcnt && c->parent)
+				clk_disable(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_clk_out_ops = {
+	.init			= &tegra30_clk_out_init,
+	.enable			= &tegra30_clk_out_enable,
+	.disable		= &tegra30_clk_out_disable,
+	.set_parent		= &tegra30_clk_out_set_parent,
+};
+
+
+/* Clock doubler ops */
+static void tegra30_clk_double_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
+	c->div = 1;
+	c->state = ON;
+	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
+		c->state = OFF;
+};
+
+static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	unsigned long parent_rate = clk_get_rate(c->parent);
+	if (rate == parent_rate) {
+		val = clk_readl(c->reg) | (0x1 << c->reg_shift);
+		clk_writel(val, c->reg);
+		c->mul = 1;
+		c->div = 1;
+		return 0;
+	} else if (rate == 2 * parent_rate) {
+		val = clk_readl(c->reg) & (~(0x1 << c->reg_shift));
+		clk_writel(val, c->reg);
+		c->mul = 2;
+		c->div = 1;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_clk_double_ops = {
+	.init			= &tegra30_clk_double_init,
+	.enable			= &tegra30_periph_clk_enable,
+	.disable		= &tegra30_periph_clk_disable,
+	.set_rate		= &tegra30_clk_double_set_rate,
+};
+
+/* Audio sync clock ops */
+static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate)
+{
+	c->rate = rate;
+	return 0;
+}
+
+static struct clk_ops tegra_sync_source_ops = {
+	.set_rate		= &tegra30_sync_source_set_rate,
+};
+
+static void tegra30_audio_sync_clk_init(struct clk *c)
+{
+	int source;
+	const struct clk_mux_sel *sel;
+	u32 val = clk_readl(c->reg);
+	c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
+	source = val & AUDIO_SYNC_SOURCE_MASK;
+	for (sel = c->inputs; sel->input != NULL; sel++)
+		if (sel->value == source)
+			break;
+	BUG_ON(sel->input == NULL);
+	c->parent = sel->input;
+}
+
+static int tegra30_audio_sync_clk_enable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
+	return 0;
+}
+
+static void tegra30_audio_sync_clk_disable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
+}
+
+static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			val = clk_readl(c->reg);
+			val &= ~AUDIO_SYNC_SOURCE_MASK;
+			val |= sel->value;
+
+			if (c->refcnt)
+				clk_enable(p);
+
+			clk_writel(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_audio_sync_clk_ops = {
+	.init       = tegra30_audio_sync_clk_init,
+	.enable     = tegra30_audio_sync_clk_enable,
+	.disable    = tegra30_audio_sync_clk_disable,
+	.set_parent = tegra30_audio_sync_clk_set_parent,
+};
+
+/* cml0 (pcie), and cml1 (sata) clock ops */
+static void tegra30_cml_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
+}
+
+static int tegra30_cml_clk_enable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val |= (0x1 << c->u.periph.clk_num);
+	clk_writel(val, c->reg);
+	return 0;
+}
+
+static void tegra30_cml_clk_disable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val &= ~(0x1 << c->u.periph.clk_num);
+	clk_writel(val, c->reg);
+}
+
+static struct clk_ops tegra_cml_clk_ops = {
+	.init			= &tegra30_cml_clk_init,
+	.enable			= &tegra30_cml_clk_enable,
+	.disable		= &tegra30_cml_clk_disable,
+};
+
+/* Clock definitions */
+static struct clk tegra_clk_32k = {
+	.name = "clk_32k",
+	.rate = 32768,
+	.ops  = NULL,
+	.max_rate = 32768,
+};
+
+static struct clk tegra_clk_m = {
+	.name      = "clk_m",
+	.flags     = ENABLE_ON_INIT,
+	.ops       = &tegra_clk_m_ops,
+	.reg       = 0x1fc,
+	.reg_shift = 28,
+	.max_rate  = 48000000,
+};
+
+static struct clk tegra_clk_m_div2 = {
+	.name      = "clk_m_div2",
+	.ops       = &tegra_clk_m_div_ops,
+	.parent    = &tegra_clk_m,
+	.mul       = 1,
+	.div       = 2,
+	.state     = ON,
+	.max_rate  = 24000000,
+};
+
+static struct clk tegra_clk_m_div4 = {
+	.name      = "clk_m_div4",
+	.ops       = &tegra_clk_m_div_ops,
+	.parent    = &tegra_clk_m,
+	.mul       = 1,
+	.div       = 4,
+	.state     = ON,
+	.max_rate  = 12000000,
+};
+
+static struct clk tegra_pll_ref = {
+	.name      = "pll_ref",
+	.flags     = ENABLE_ON_INIT,
+	.ops       = &tegra_pll_ref_ops,
+	.parent    = &tegra_clk_m,
+	.max_rate  = 26000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+	{ 12000000, 1040000000, 520,  6, 1, 8},
+	{ 13000000, 1040000000, 480,  6, 1, 8},
+	{ 16800000, 1040000000, 495,  8, 1, 8},		/* actual: 1039.5 MHz */
+	{ 19200000, 1040000000, 325,  6, 1, 6},
+	{ 26000000, 1040000000, 520, 13, 1, 8},
+
+	{ 12000000, 832000000, 416,  6, 1, 8},
+	{ 13000000, 832000000, 832, 13, 1, 8},
+	{ 16800000, 832000000, 396,  8, 1, 8},		/* actual: 831.6 MHz */
+	{ 19200000, 832000000, 260,  6, 1, 8},
+	{ 26000000, 832000000, 416, 13, 1, 8},
+
+	{ 12000000, 624000000, 624, 12, 1, 8},
+	{ 13000000, 624000000, 624, 13, 1, 8},
+	{ 16800000, 600000000, 520, 14, 1, 8},
+	{ 19200000, 624000000, 520, 16, 1, 8},
+	{ 26000000, 624000000, 624, 26, 1, 8},
+
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 16800000, 600000000, 500, 14, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+
+	{ 12000000, 520000000, 520, 12, 1, 8},
+	{ 13000000, 520000000, 520, 13, 1, 8},
+	{ 16800000, 520000000, 495, 16, 1, 8},		/* actual: 519.75 MHz */
+	{ 19200000, 520000000, 325, 12, 1, 6},
+	{ 26000000, 520000000, 520, 26, 1, 8},
+
+	{ 12000000, 416000000, 416, 12, 1, 8},
+	{ 13000000, 416000000, 416, 13, 1, 8},
+	{ 16800000, 416000000, 396, 16, 1, 8},		/* actual: 415.8 MHz */
+	{ 19200000, 416000000, 260, 12, 1, 6},
+	{ 26000000, 416000000, 416, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_c = {
+	.name      = "pll_c",
+	.flags	   = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x80,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 1400000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 31000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 20000000,
+		.vco_max   = 1400000000,
+		.freq_table = tegra_pll_c_freq_table,
+		.lock_delay = 300,
+	},
+};
+
+static struct clk tegra_pll_c_out1 = {
+	.name      = "pll_c_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_c,
+	.reg       = 0x84,
+	.reg_shift = 0,
+	.max_rate  = 700000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+	{ 12000000, 666000000, 666, 12, 1, 8},
+	{ 13000000, 666000000, 666, 13, 1, 8},
+	{ 16800000, 666000000, 555, 14, 1, 8},
+	{ 19200000, 666000000, 555, 16, 1, 8},
+	{ 26000000, 666000000, 666, 26, 1, 8},
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 16800000, 600000000, 500, 14, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_m = {
+	.name      = "pll_m",
+	.flags     = PLL_HAS_CPCON | PLLM,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x90,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 800000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 31000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 20000000,
+		.vco_max   = 1200000000,
+		.freq_table = tegra_pll_m_freq_table,
+		.lock_delay = 300,
+	},
+};
+
+static struct clk tegra_pll_m_out1 = {
+	.name      = "pll_m_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_m,
+	.reg       = 0x94,
+	.reg_shift = 0,
+	.max_rate  = 600000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+	{ 12000000, 216000000, 432, 12, 2, 8},
+	{ 13000000, 216000000, 432, 13, 2, 8},
+	{ 16800000, 216000000, 360, 14, 2, 8},
+	{ 19200000, 216000000, 360, 16, 2, 8},
+	{ 26000000, 216000000, 432, 26, 2, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_p = {
+	.name      = "pll_p",
+	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xa0,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 432000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 31000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 20000000,
+		.vco_max   = 1400000000,
+		.freq_table = tegra_pll_p_freq_table,
+		.lock_delay = 300,
+		.fixed_rate = 408000000,
+	},
+};
+
+static struct clk tegra_pll_p_out1 = {
+	.name      = "pll_p_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 0,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out2 = {
+	.name      = "pll_p_out2",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 16,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out3 = {
+	.name      = "pll_p_out3",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 0,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out4 = {
+	.name      = "pll_p_out4",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 16,
+	.max_rate  = 432000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+	{ 9600000, 564480000, 294, 5, 1, 4},
+	{ 9600000, 552960000, 288, 5, 1, 4},
+	{ 9600000, 24000000,  5,   2, 1, 1},
+
+	{ 28800000, 56448000, 49, 25, 1, 1},
+	{ 28800000, 73728000, 64, 25, 1, 1},
+	{ 28800000, 24000000,  5,  6, 1, 1},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_a = {
+	.name      = "pll_a",
+	.flags     = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xb0,
+	.parent    = &tegra_pll_p_out1,
+	.max_rate  = 700000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 31000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 20000000,
+		.vco_max   = 1400000000,
+		.freq_table = tegra_pll_a_freq_table,
+		.lock_delay = 300,
+	},
+};
+
+static struct clk tegra_pll_a_out0 = {
+	.name      = "pll_a_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_a,
+	.reg       = 0xb4,
+	.reg_shift = 0,
+	.max_rate  = 100000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+	{ 12000000, 216000000, 216, 12, 1, 4},
+	{ 13000000, 216000000, 216, 13, 1, 4},
+	{ 16800000, 216000000, 180, 14, 1, 4},
+	{ 19200000, 216000000, 180, 16, 1, 4},
+	{ 26000000, 216000000, 216, 26, 1, 4},
+
+	{ 12000000, 594000000, 594, 12, 1, 8},
+	{ 13000000, 594000000, 594, 13, 1, 8},
+	{ 16800000, 594000000, 495, 14, 1, 8},
+	{ 19200000, 594000000, 495, 16, 1, 8},
+	{ 26000000, 594000000, 594, 26, 1, 8},
+
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_d = {
+	.name      = "pll_d",
+	.flags     = PLL_HAS_CPCON | PLLD,
+	.ops       = &tegra_plld_ops,
+	.reg       = 0xd0,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 1000000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 40000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 40000000,
+		.vco_max   = 1000000000,
+		.freq_table = tegra_pll_d_freq_table,
+		.lock_delay = 1000,
+	},
+};
+
+static struct clk tegra_pll_d_out0 = {
+	.name      = "pll_d_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_2 | PLLD,
+	.parent    = &tegra_pll_d,
+	.max_rate  = 500000000,
+};
+
+static struct clk tegra_pll_d2 = {
+	.name      = "pll_d2",
+	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD,
+	.ops       = &tegra_plld_ops,
+	.reg       = 0x4b8,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 1000000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 40000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 40000000,
+		.vco_max   = 1000000000,
+		.freq_table = tegra_pll_d_freq_table,
+		.lock_delay = 1000,
+	},
+};
+
+static struct clk tegra_pll_d2_out0 = {
+	.name      = "pll_d2_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_2 | PLLD,
+	.parent    = &tegra_pll_d2,
+	.max_rate  = 500000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+	{ 12000000, 480000000, 960, 12, 2, 12},
+	{ 13000000, 480000000, 960, 13, 2, 12},
+	{ 16800000, 480000000, 400, 7,  2, 5},
+	{ 19200000, 480000000, 200, 4,  2, 3},
+	{ 26000000, 480000000, 960, 26, 2, 12},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_u = {
+	.name      = "pll_u",
+	.flags     = PLL_HAS_CPCON | PLLU,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xc0,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 480000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 40000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 480000000,
+		.vco_max   = 960000000,
+		.freq_table = tegra_pll_u_freq_table,
+		.lock_delay = 1000,
+	},
+};
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+	/* 1.7 GHz */
+	{ 12000000, 1700000000, 850,  6,  1, 8},
+	{ 13000000, 1700000000, 915,  7,  1, 8},	/* actual: 1699.2 MHz */
+	{ 16800000, 1700000000, 708,  7,  1, 8},	/* actual: 1699.2 MHz */
+	{ 19200000, 1700000000, 885,  10, 1, 8},	/* actual: 1699.2 MHz */
+	{ 26000000, 1700000000, 850,  13, 1, 8},
+
+	/* 1.6 GHz */
+	{ 12000000, 1600000000, 800,  6,  1, 8},
+	{ 13000000, 1600000000, 738,  6,  1, 8},	/* actual: 1599.0 MHz */
+	{ 16800000, 1600000000, 857,  9,  1, 8},	/* actual: 1599.7 MHz */
+	{ 19200000, 1600000000, 500,  6,  1, 8},
+	{ 26000000, 1600000000, 800,  13, 1, 8},
+
+	/* 1.5 GHz */
+	{ 12000000, 1500000000, 750,  6,  1, 8},
+	{ 13000000, 1500000000, 923,  8,  1, 8},	/* actual: 1499.8 MHz */
+	{ 16800000, 1500000000, 625,  7,  1, 8},
+	{ 19200000, 1500000000, 625,  8,  1, 8},
+	{ 26000000, 1500000000, 750,  13, 1, 8},
+
+	/* 1.4 GHz */
+	{ 12000000, 1400000000, 700,  6,  1, 8},
+	{ 13000000, 1400000000, 969,  9,  1, 8},	/* actual: 1399.7 MHz */
+	{ 16800000, 1400000000, 1000, 12, 1, 8},
+	{ 19200000, 1400000000, 875,  12, 1, 8},
+	{ 26000000, 1400000000, 700,  13, 1, 8},
+
+	/* 1.3 GHz */
+	{ 12000000, 1300000000, 975,  9,  1, 8},
+	{ 13000000, 1300000000, 1000, 10, 1, 8},
+	{ 16800000, 1300000000, 928,  12, 1, 8},	/* actual: 1299.2 MHz */
+	{ 19200000, 1300000000, 812,  12, 1, 8},	/* actual: 1299.2 MHz */
+	{ 26000000, 1300000000, 650,  13, 1, 8},
+
+	/* 1.2 GHz */
+	{ 12000000, 1200000000, 1000, 10, 1, 8},
+	{ 13000000, 1200000000, 923,  10, 1, 8},	/* actual: 1199.9 MHz */
+	{ 16800000, 1200000000, 1000, 14, 1, 8},
+	{ 19200000, 1200000000, 1000, 16, 1, 8},
+	{ 26000000, 1200000000, 600,  13, 1, 8},
+
+	/* 1.1 GHz */
+	{ 12000000, 1100000000, 825,  9,  1, 8},
+	{ 13000000, 1100000000, 846,  10, 1, 8},	/* actual: 1099.8 MHz */
+	{ 16800000, 1100000000, 982,  15, 1, 8},	/* actual: 1099.8 MHz */
+	{ 19200000, 1100000000, 859,  15, 1, 8},	/* actual: 1099.5 MHz */
+	{ 26000000, 1100000000, 550,  13, 1, 8},
+
+	/* 1 GHz */
+	{ 12000000, 1000000000, 1000, 12, 1, 8},
+	{ 13000000, 1000000000, 1000, 13, 1, 8},
+	{ 16800000, 1000000000, 833,  14, 1, 8},	/* actual: 999.6 MHz */
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 8},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_x = {
+	.name      = "pll_x",
+	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xe0,
+	.parent    = &tegra_pll_ref,
+	.max_rate  = 1700000000,
+	.u.pll = {
+		.input_min = 2000000,
+		.input_max = 31000000,
+		.cf_min    = 1000000,
+		.cf_max    = 6000000,
+		.vco_min   = 20000000,
+		.vco_max   = 1700000000,
+		.freq_table = tegra_pll_x_freq_table,
+		.lock_delay = 300,
+	},
+};
+
+static struct clk tegra_pll_x_out0 = {
+	.name      = "pll_x_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_2 | PLLX,
+	.parent    = &tegra_pll_x,
+	.max_rate  = 850000000,
+};
+
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+	/* PLLE special case: use cpcon field to store cml divider value */
+	{ 12000000,  100000000, 150, 1,  18, 11},
+	{ 216000000, 100000000, 200, 18, 24, 13},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_e = {
+	.name      = "pll_e",
+	.flags     = PLL_ALT_MISC_REG,
+	.ops       = &tegra_plle_ops,
+	.reg       = 0xe8,
+	.max_rate  = 100000000,
+	.u.pll = {
+		.input_min = 12000000,
+		.input_max = 216000000,
+		.cf_min    = 12000000,
+		.cf_max    = 12000000,
+		.vco_min   = 1200000000,
+		.vco_max   = 2400000000U,
+		.freq_table = tegra_pll_e_freq_table,
+		.lock_delay = 300,
+		.fixed_rate = 100000000,
+	},
+};
+
+static struct clk tegra_cml0_clk = {
+	.name      = "cml0",
+	.parent    = &tegra_pll_e,
+	.ops       = &tegra_cml_clk_ops,
+	.reg       = PLLE_AUX,
+	.max_rate  = 100000000,
+	.u.periph  = {
+		.clk_num = 0,
+	},
+};
+
+static struct clk tegra_cml1_clk = {
+	.name      = "cml1",
+	.parent    = &tegra_pll_e,
+	.ops       = &tegra_cml_clk_ops,
+	.reg       = PLLE_AUX,
+	.max_rate  = 100000000,
+	.u.periph  = {
+		.clk_num   = 1,
+	},
+};
+
+static struct clk tegra_pciex_clk = {
+	.name      = "pciex",
+	.parent    = &tegra_pll_e,
+	.ops       = &tegra_pciex_clk_ops,
+	.max_rate  = 100000000,
+	.u.periph  = {
+		.clk_num   = 74,
+	},
+};
+
+/* Audio sync clocks */
+#define SYNC_SOURCE(_id)				\
+	{						\
+		.name      = #_id "_sync",		\
+		.rate      = 24000000,			\
+		.max_rate  = 24000000,			\
+		.ops       = &tegra_sync_source_ops	\
+	}
+static struct clk tegra_sync_source_list[] = {
+	SYNC_SOURCE(spdif_in),
+	SYNC_SOURCE(i2s0),
+	SYNC_SOURCE(i2s1),
+	SYNC_SOURCE(i2s2),
+	SYNC_SOURCE(i2s3),
+	SYNC_SOURCE(i2s4),
+	SYNC_SOURCE(vimclk),
+};
+
+static struct clk_mux_sel mux_audio_sync_clk[] = {
+	{ .input = &tegra_sync_source_list[0],	.value = 0},
+	{ .input = &tegra_sync_source_list[1],	.value = 1},
+	{ .input = &tegra_sync_source_list[2],	.value = 2},
+	{ .input = &tegra_sync_source_list[3],	.value = 3},
+	{ .input = &tegra_sync_source_list[4],	.value = 4},
+	{ .input = &tegra_sync_source_list[5],	.value = 5},
+	{ .input = &tegra_pll_a_out0,		.value = 6},
+	{ .input = &tegra_sync_source_list[6],	.value = 7},
+	{ 0, 0 }
+};
+
+#define AUDIO_SYNC_CLK(_id, _index)			\
+	{						\
+		.name      = #_id,			\
+		.inputs    = mux_audio_sync_clk,	\
+		.reg       = 0x4A0 + (_index) * 4,	\
+		.max_rate  = 24000000,			\
+		.ops       = &tegra_audio_sync_clk_ops	\
+	}
+static struct clk tegra_clk_audio_list[] = {
+	AUDIO_SYNC_CLK(audio0, 0),
+	AUDIO_SYNC_CLK(audio1, 1),
+	AUDIO_SYNC_CLK(audio2, 2),
+	AUDIO_SYNC_CLK(audio3, 3),
+	AUDIO_SYNC_CLK(audio4, 4),
+	AUDIO_SYNC_CLK(audio, 5),	/* SPDIF */
+};
+
+#define AUDIO_SYNC_2X_CLK(_id, _index)				\
+	{							\
+		.name      = #_id "_2x",			\
+		.flags     = PERIPH_NO_RESET,			\
+		.max_rate  = 48000000,				\
+		.ops       = &tegra_clk_double_ops,		\
+		.reg       = 0x49C,				\
+		.reg_shift = 24 + (_index),			\
+		.parent    = &tegra_clk_audio_list[(_index)],	\
+		.u.periph = {					\
+			.clk_num = 113 + (_index),		\
+		},						\
+	}
+static struct clk tegra_clk_audio_2x_list[] = {
+	AUDIO_SYNC_2X_CLK(audio0, 0),
+	AUDIO_SYNC_2X_CLK(audio1, 1),
+	AUDIO_SYNC_2X_CLK(audio2, 2),
+	AUDIO_SYNC_2X_CLK(audio3, 3),
+	AUDIO_SYNC_2X_CLK(audio4, 4),
+	AUDIO_SYNC_2X_CLK(audio, 5),	/* SPDIF */
+};
+
+#define MUX_I2S_SPDIF(_id, _index)					\
+static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = {	\
+	{.input = &tegra_pll_a_out0, .value = 0},			\
+	{.input = &tegra_clk_audio_2x_list[(_index)], .value = 1},	\
+	{.input = &tegra_pll_p, .value = 2},				\
+	{.input = &tegra_clk_m, .value = 3},				\
+	{ 0, 0},							\
+}
+MUX_I2S_SPDIF(audio0, 0);
+MUX_I2S_SPDIF(audio1, 1);
+MUX_I2S_SPDIF(audio2, 2);
+MUX_I2S_SPDIF(audio3, 3);
+MUX_I2S_SPDIF(audio4, 4);
+MUX_I2S_SPDIF(audio, 5);		/* SPDIF */
+
+/* External clock outputs (through PMC) */
+#define MUX_EXTERN_OUT(_id)						\
+static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = {	\
+	{.input = &tegra_clk_m,		.value = 0},			\
+	{.input = &tegra_clk_m_div2,	.value = 1},			\
+	{.input = &tegra_clk_m_div4,	.value = 2},			\
+	{.input = NULL,			.value = 3}, /* placeholder */	\
+	{ 0, 0},							\
+}
+MUX_EXTERN_OUT(1);
+MUX_EXTERN_OUT(2);
+MUX_EXTERN_OUT(3);
+
+static struct clk_mux_sel *mux_extern_out_list[] = {
+	mux_clkm_clkm2_clkm4_extern1,
+	mux_clkm_clkm2_clkm4_extern2,
+	mux_clkm_clkm2_clkm4_extern3,
+};
+
+#define CLK_OUT_CLK(_id)					\
+	{							\
+		.name      = "clk_out_" #_id,			\
+		.lookup    = {					\
+			.dev_id    = "clk_out_" #_id,		\
+			.con_id	   = "extern" #_id,		\
+		},						\
+		.ops       = &tegra_clk_out_ops,		\
+		.reg       = 0x1a8,				\
+		.inputs    = mux_clkm_clkm2_clkm4_extern##_id,	\
+		.flags     = MUX_CLK_OUT,			\
+		.max_rate  = 216000000,				\
+		.u.periph = {					\
+			.clk_num   = (_id - 1) * 8 + 2,		\
+		},						\
+	}
+static struct clk tegra_clk_out_list[] = {
+	CLK_OUT_CLK(1),
+	CLK_OUT_CLK(2),
+	CLK_OUT_CLK(3),
+};
+
+/* called after peripheral external clocks are initialized */
+static void init_clk_out_mux(void)
+{
+	int i;
+	struct clk *c;
+
+	/* output clock con_id is the name of peripheral
+	   external clock connected to input 3 of the output mux */
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) {
+		c = tegra_get_clock_by_name(
+			tegra_clk_out_list[i].lookup.con_id);
+		if (!c)
+			pr_err("%s: could not find clk %s\n", __func__,
+			       tegra_clk_out_list[i].lookup.con_id);
+		mux_extern_out_list[i][3].input = c;
+	}
+}
+
+/* Peripheral muxes */
+static struct clk_mux_sel mux_sclk[] = {
+	{ .input = &tegra_clk_m,	.value = 0},
+	{ .input = &tegra_pll_c_out1,	.value = 1},
+	{ .input = &tegra_pll_p_out4,	.value = 2},
+	{ .input = &tegra_pll_p_out3,	.value = 3},
+	{ .input = &tegra_pll_p_out2,	.value = 4},
+	/* { .input = &tegra_clk_d,	.value = 5}, - no use on tegra30 */
+	{ .input = &tegra_clk_32k,	.value = 6},
+	{ .input = &tegra_pll_m_out1,	.value = 7},
+	{ 0, 0},
+};
+
+static struct clk tegra_clk_sclk = {
+	.name	= "sclk",
+	.inputs	= mux_sclk,
+	.reg	= 0x28,
+	.ops	= &tegra_super_ops,
+	.max_rate = 334000000,
+	.min_rate = 40000000,
+};
+
+static struct clk tegra_clk_blink = {
+	.name		= "blink",
+	.parent		= &tegra_clk_32k,
+	.reg		= 0x40,
+	.ops		= &tegra_blink_clk_ops,
+	.max_rate	= 32768,
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
+	{ .input = &tegra_pll_m, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_pll_a_out0, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
+	{ .input = &tegra_pll_p, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_m, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_clkm[] = {
+	{ .input = &tegra_pll_p, .value = 0},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
+	{.input = &tegra_pll_p, .value = 0},
+	{.input = &tegra_pll_d_out0, .value = 1},
+	{.input = &tegra_pll_c, .value = 2},
+	{.input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+	{.input = &tegra_pll_p, .value = 0},
+	{.input = &tegra_pll_m, .value = 1},
+	{.input = &tegra_pll_d_out0, .value = 2},
+	{.input = &tegra_pll_a_out0, .value = 3},
+	{.input = &tegra_pll_c, .value = 4},
+	{.input = &tegra_pll_d2_out0, .value = 5},
+	{.input = &tegra_clk_m, .value = 6},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = {
+	{ .input = &tegra_pll_a_out0, .value = 0},
+	/* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_clk_32k,   .value = 2},
+	{.input = &tegra_clk_m,     .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_clk_m,     .value = 2},
+	{.input = &tegra_clk_32k,   .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_pll_m,     .value = 2},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_m[] = {
+	{ .input = &tegra_clk_m, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_out3[] = {
+	{ .input = &tegra_pll_p_out3, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plld_out0[] = {
+	{ .input = &tegra_pll_d_out0, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plld_out0_plld2_out0[] = {
+	{ .input = &tegra_pll_d_out0,  .value = 0},
+	{ .input = &tegra_pll_d2_out0, .value = 1},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_32k[] = {
+	{ .input = &tegra_clk_32k, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = {
+	{ .input = &tegra_pll_a_out0, .value = 0},
+	{ .input = &tegra_clk_32k,    .value = 1},
+	{ .input = &tegra_pll_p,      .value = 2},
+	{ .input = &tegra_clk_m,      .value = 3},
+	{ .input = &tegra_pll_e,      .value = 4},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_cclk_g[] = {
+	{ .input = &tegra_clk_m,        .value = 0},
+	{ .input = &tegra_pll_c,        .value = 1},
+	{ .input = &tegra_clk_32k,      .value = 2},
+	{ .input = &tegra_pll_m,        .value = 3},
+	{ .input = &tegra_pll_p,        .value = 4},
+	{ .input = &tegra_pll_p_out4,   .value = 5},
+	{ .input = &tegra_pll_p_out3,   .value = 6},
+	{ .input = &tegra_pll_x,        .value = 8},
+	{ 0, 0},
+};
+
+static struct clk tegra_clk_cclk_g = {
+	.name	= "cclk_g",
+	.flags	= DIV_U71 | DIV_U71_INT,
+	.inputs = mux_cclk_g,
+	.reg	= 0x368,
+	.ops	= &tegra_super_ops,
+	.max_rate = 1700000000,
+};
+
+static struct clk tegra30_clk_twd = {
+	.parent	  = &tegra_clk_cclk_g,
+	.name     = "twd",
+	.ops      = &tegra30_twd_ops,
+	.max_rate = 1400000000,	/* Same as tegra_clk_cpu_cmplx.max_rate */
+	.mul      = 1,
+	.div      = 2,
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
+	{						\
+		.name      = _name,			\
+		.lookup    = {				\
+			.dev_id    = _dev,		\
+			.con_id	   = _con,		\
+		},					\
+		.ops       = &tegra_periph_clk_ops,	\
+		.reg       = _reg,			\
+		.inputs    = _inputs,			\
+		.flags     = _flags,			\
+		.max_rate  = _max,			\
+		.u.periph = {				\
+			.clk_num   = _clk_num,		\
+		},					\
+	}
+
+#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs,	\
+			_flags, _ops)					\
+	{						\
+		.name      = _name,			\
+		.lookup    = {				\
+			.dev_id    = _dev,		\
+			.con_id	   = _con,		\
+		},					\
+		.ops       = _ops,			\
+		.reg       = _reg,			\
+		.inputs    = _inputs,			\
+		.flags     = _flags,			\
+		.max_rate  = _max,			\
+		.u.periph = {				\
+			.clk_num   = _clk_num,		\
+		},					\
+	}
+
+#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\
+	{						\
+		.name      = _name,			\
+		.lookup    = {				\
+			.dev_id    = _dev,		\
+			.con_id    = _con,		\
+		},					\
+		.ops       = &tegra_clk_shared_bus_ops,	\
+		.parent = _parent,			\
+		.u.shared_bus_user = {			\
+			.client_id = _id,		\
+			.client_div = _div,		\
+			.mode = _mode,			\
+		},					\
+	}
+struct clk tegra_list_clks[] = {
+	PERIPH_CLK("apbdma",	"tegra-dma",		NULL,	34,	0,	26000000,  mux_clk_m,			0),
+	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
+	PERIPH_CLK("kbc",	"tegra-kbc",		NULL,	36,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
+	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
+	PERIPH_CLK("kfuse",	"kfuse-tegra",		NULL,	40,	0,	26000000,  mux_clk_m,			0),
+	PERIPH_CLK("fuse",	"fuse-tegra",		"fuse",	39,	0,	26000000,  mux_clk_m,			PERIPH_ON_APB),
+	PERIPH_CLK("fuse_burn",	"fuse-tegra",		"fuse_burn",	39,	0,	26000000,  mux_clk_m,		PERIPH_ON_APB),
+	PERIPH_CLK("apbif",	"tegra30-ahub",		"apbif", 107,	0,	26000000,  mux_clk_m,			0),
+	PERIPH_CLK("i2s0",	"tegra30-i2s.0",	NULL,	30,	0x1d8,	26000000,  mux_pllaout0_audio0_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("i2s1",	"tegra30-i2s.1",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio1_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("i2s2",	"tegra30-i2s.2",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("i2s3",	"tegra30-i2s.3",	NULL,	101,	0x3bc,	26000000,  mux_pllaout0_audio3_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("i2s4",	"tegra30-i2s.4",	NULL,	102,	0x3c0,	26000000,  mux_pllaout0_audio4_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("spdif_out",	"tegra30-spdif",	"spdif_out",	10,	0x108,	100000000, mux_pllaout0_audio_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("spdif_in",	"tegra30-spdif",	"spdif_in",	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_clk32_clkm,	MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("d_audio",	"tegra30-ahub",		"d_audio", 106,	0x3d0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("dam0",	"tegra30-dam.0",	NULL,   108,	0x3d8,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("dam1",	"tegra30-dam.1",	NULL,   109,	0x3dc,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("dam2",	"tegra30-dam.2",	NULL,   110,	0x3e0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("hda",	"tegra30-hda",		"hda",   125,	0x428,	108000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("hda2codec_2x",	"tegra30-hda",	"hda2codec",   111,	0x3e4,	48000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("hda2hdmi",	"tegra30-hda",		"hda2hdmi",	128,	0,	48000000,  mux_clk_m,			0),
+	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sbc5",	"spi_tegra.4",		NULL,	104,	0x3c8,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sbc6",	"spi_tegra.5",		NULL,	105,	0x3cc,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sata_oob",	"tegra_sata_oob",	NULL,	123,	0x420,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sata",	"tegra_sata",		NULL,	124,	0x424,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sata_cold",	"tegra_sata_cold",	NULL,	129,	0,	48000000,  mux_clk_m,			0),
+	PERIPH_CLK_EX("ndflash", "tegra_nand",		NULL,	13,	0x160,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71,	&tegra_nand_clk_ops),
+	PERIPH_CLK("ndspeed",	"tegra_nand_speed",	NULL,	80,	0x3f8,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x164,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("vcp",	"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0),
+	PERIPH_CLK("bsea",	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0),
+	PERIPH_CLK("bsev",	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0),
+	PERIPH_CLK("vde",	"vde",			NULL,	61,	0x1c8,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
+	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
+	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	127000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */
+	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
+	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
+	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
+	PERIPH_CLK("i2c4",	"tegra-i2c.3",		NULL,	103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
+	PERIPH_CLK("i2c5",	"tegra-i2c.4",		NULL,	47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
+	PERIPH_CLK("uarta",	"tegra_uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartb",	"tegra_uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartc",	"tegra_uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartd",	"tegra_uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uarte",	"tegra_uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uarta_dbg",	"serial8250.0",		"uarta", 6,	0x178,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartb_dbg",	"serial8250.0",		"uartb", 7,	0x17c,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartc_dbg",	"serial8250.0",		"uartc", 55,	0x1a0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uartd_dbg",	"serial8250.0",		"uartd", 65,	0x1c0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK("uarte_dbg",	"serial8250.0",		"uarte", 66,	0x1c4,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+	PERIPH_CLK_EX("vi",	"tegra_camera",		"vi",	20,	0x148,	425000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT,	&tegra_vi_clk_ops),
+	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
+	PERIPH_CLK("3d2",       "3d2",			NULL,	98,	0x3b0,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
+	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE),
+	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET),
+	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
+	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
+	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	260000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
+	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK_EX("dtv",	"dtv",			NULL,	79,	0x1dc,	250000000, mux_clk_m,			0,		&tegra_dtv_clk_ops),
+	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8 | DIV_U71),
+	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	220000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
+	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
+	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("dsia",	"tegradc.0",		"dsia",	48,	0,	500000000, mux_plld_out0,		0),
+	PERIPH_CLK_EX("dsib",	"tegradc.1",		"dsib",	82,	0xd0,	500000000, mux_plld_out0_plld2_out0,	MUX | PLLD,	&tegra_dsib_clk_ops),
+	PERIPH_CLK("csi",	"tegra_camera",		"csi",	52,	0,	102000000, mux_pllp_out3,		0),
+	PERIPH_CLK("isp",	"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
+	PERIPH_CLK("csus",	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
+
+	PERIPH_CLK("tsensor",	"tegra-tsensor",	NULL,	100,	0x3b8,	216000000, mux_pllp_pllc_clkm_clk32,	MUX | DIV_U71),
+	PERIPH_CLK("actmon",	"actmon",		NULL,	119,	0x3e8,	216000000, mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("extern1",	"extern1",		NULL,	120,	0x3ec,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
+	PERIPH_CLK("extern2",	"extern2",		NULL,	121,	0x3f0,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
+	PERIPH_CLK("extern3",	"extern3",		NULL,	122,	0x3f4,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
+	PERIPH_CLK("i2cslow",	"i2cslow",		NULL,	81,	0x3fc,	26000000,  mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
+	PERIPH_CLK("pcie",	"tegra-pcie",		"pcie",	70,	0,	250000000, mux_clk_m,			0),
+	PERIPH_CLK("afi",	"tegra-pcie",		"afi",	72,	0,	250000000, mux_clk_m,			0),
+	PERIPH_CLK("se",	"se",			NULL,	127,	0x42c,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con)		\
+	{						\
+		.name	= _name,			\
+		.lookup	= {				\
+			.dev_id	= _dev,			\
+			.con_id		= _con,		\
+		},					\
+	}
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration.  List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
+	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
+	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
+	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
+	CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
+	CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
+	CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
+	CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
+	CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
+	CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
+	CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
+	CLK_DUPLICATE("bsev", "nvavp", "bsev"),
+	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
+	CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
+	CLK_DUPLICATE("bsea", "nvavp", "bsea"),
+	CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
+	CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
+	CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
+	CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
+	CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
+	CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
+	CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
+	CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
+	CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
+	CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
+	CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
+	CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
+	CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
+	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
+	CLK_DUPLICATE("twd", "smp_twd", NULL),
+	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+};
+
+struct clk *tegra_ptr_clks[] = {
+	&tegra_clk_32k,
+	&tegra_clk_m,
+	&tegra_clk_m_div2,
+	&tegra_clk_m_div4,
+	&tegra_pll_ref,
+	&tegra_pll_m,
+	&tegra_pll_m_out1,
+	&tegra_pll_c,
+	&tegra_pll_c_out1,
+	&tegra_pll_p,
+	&tegra_pll_p_out1,
+	&tegra_pll_p_out2,
+	&tegra_pll_p_out3,
+	&tegra_pll_p_out4,
+	&tegra_pll_a,
+	&tegra_pll_a_out0,
+	&tegra_pll_d,
+	&tegra_pll_d_out0,
+	&tegra_pll_d2,
+	&tegra_pll_d2_out0,
+	&tegra_pll_u,
+	&tegra_pll_x,
+	&tegra_pll_x_out0,
+	&tegra_pll_e,
+	&tegra_clk_cclk_g,
+	&tegra_cml0_clk,
+	&tegra_cml1_clk,
+	&tegra_pciex_clk,
+	&tegra_clk_sclk,
+	&tegra_clk_blink,
+	&tegra30_clk_twd,
+};
+
+
+static void tegra30_init_one_clock(struct clk *c)
+{
+	clk_init(c);
+	INIT_LIST_HEAD(&c->shared_bus_list);
+	if (!c->lookup.dev_id && !c->lookup.con_id)
+		c->lookup.con_id = c->name;
+	c->lookup.clk = c;
+	clkdev_add(&c->lookup);
+}
+
+void __init tegra30_init_clocks(void)
+{
+	int i;
+	struct clk *c;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+		tegra30_init_one_clock(tegra_ptr_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+		tegra30_init_one_clock(&tegra_list_clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+		if (!c) {
+			pr_err("%s: Unknown duplicate clock %s\n", __func__,
+				tegra_clk_duplicates[i].name);
+			continue;
+		}
+
+		tegra_clk_duplicates[i].lookup.clk = c;
+		clkdev_add(&tegra_clk_duplicates[i].lookup);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
+		tegra30_init_one_clock(&tegra_sync_source_list[i]);
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
+		tegra30_init_one_clock(&tegra_clk_audio_list[i]);
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
+		tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]);
+
+	init_clk_out_mux();
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
+		tegra30_init_one_clock(&tegra_clk_out_list[i]);
+
+}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 52af004..c59e8b8 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,7 @@
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..93d4039 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -27,9 +27,6 @@
 
 extern void __init db5500_dma_init(void);
 
-/* We re-use nomadik_timer for this platform */
-extern void nmdk_timer_init(void);
-
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index aea467d..fd00024 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -17,19 +17,20 @@
 
 static void __init ux500_timer_init(void)
 {
+	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
 
 	if (cpu_is_u5500()) {
 #ifdef CONFIG_LOCAL_TIMERS
 		twd_base = __io_address(U5500_TWD_BASE);
 #endif
-		mtu_base = __io_address(U5500_MTU0_BASE);
+		mtu_timer_base = __io_address(U5500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
 	} else if (cpu_is_u8500()) {
 #ifdef CONFIG_LOCAL_TIMERS
 		twd_base = __io_address(U8500_TWD_BASE);
 #endif
-		mtu_base = __io_address(U8500_MTU0_BASE);
+		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
 		ux500_unknown_soc();
@@ -52,7 +53,7 @@
 	 *
 	 */
 
-	nmdk_timer_init();
+	nmdk_timer_init(mtu_timer_base);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 }
 
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9b3d0fb..88c3ba1 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -7,7 +7,7 @@
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0404ccb..f1c8486 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -230,9 +230,7 @@
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
+	teq	r5, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
index f5b7e0f..220dd6f 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/plat-mxc/cpu.c
@@ -1,5 +1,6 @@
 
 #include <linux/module.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 unsigned int __mxc_cpu_type;
@@ -18,3 +19,26 @@
 		pr_info("CPU identified as %s, silicon rev %d.%d\n",
 				cpu, (srev >> 4) & 0xf, srev & 0xf);
 }
+
+void __init imx_set_aips(void __iomem *base)
+{
+	unsigned int reg;
+/*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+	__raw_writel(0x77777777, base + 0x0);
+	__raw_writel(0x77777777, base + 0x4);
+
+/*
+ * Set all OPACRx to be non-bufferable, to not require
+ * supervisor privilege level for access, allow for
+ * write access and untrusted master access.
+ */
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1bf0df8..7c24e5a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -75,6 +75,7 @@
 extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
+extern void imx_set_aips(void __iomem *);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -84,6 +85,14 @@
 	STOP_POWER_OFF,		/* STOP + SRPG */
 };
 
+enum mx3_cpu_pwr_mode {
+	MX3_RUN,
+	MX3_WAIT,
+	MX3_DOZE,
+	MX3_SLEEP,
+};
+
+extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 6508e76..582641f 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,9 +1,7 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
-/* should be set by the platform code */
-extern void __iomem *mtu_base;
-
+void nmdk_timer_init(void __iomem *base);
 void nmdk_clkevt_reset(void);
 void nmdk_clksrc_reset(void);
 
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ad1b45b..9222e55 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -21,12 +21,6 @@
 #include <asm/sched_clock.h>
 
 /*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
-/*
  * The MTU device hosts four different counters, with 4 set of
  * registers. These are register names.
  */
@@ -66,12 +60,11 @@
 #define MTU_PCELL2	0xff8
 #define MTU_PCELL3	0xffC
 
+static void __iomem *mtu_base;
 static bool clkevt_periodic;
 static u32 clk_prescale;
 static u32 nmdk_cycle;		/* write-once */
 
-void __iomem *mtu_base; /* Assigned by machine code */
-
 #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
 /*
  * Override the global weak sched_clock symbol with this
@@ -103,7 +96,6 @@
 void nmdk_clkevt_reset(void)
 {
 	if (clkevt_periodic) {
-
 		/* Timer: configure load and background-load, and fire it up */
 		writel(nmdk_cycle, mtu_base + MTU_LR(1));
 		writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
@@ -121,7 +113,6 @@
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		clkevt_periodic = true;
@@ -183,15 +174,16 @@
 	       mtu_base + MTU_CR(0));
 }
 
-void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void __iomem *base)
 {
 	unsigned long rate;
 	struct clk *clk0;
 
+	mtu_base = base;
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
-
-	clk_enable(clk0);
+	BUG_ON(clk_prepare(clk0) < 0);
+	BUG_ON(clk_enable(clk0) < 0);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
@@ -224,17 +216,8 @@
 	setup_sched_clock(nomadik_read_sched_clock, 32, rate);
 #endif
 
-	/* Timer 1 is used for events */
-
-	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
-
-	nmdk_clkevt.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
-	nmdk_clkevt.min_delta_ns =
-		clockevent_delta2ns(0x00000002, &nmdk_clkevt);
-	nmdk_clkevt.cpumask	= cpumask_of(0);
-
-	/* Register irq and clockevents */
+	/* Timer 1 is used for events, register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	clockevents_register_device(&nmdk_clkevt);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
 }
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 6b51086..428ccb1 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -451,7 +451,12 @@
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
-void omap2_check_revision(void);
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
 
 /*
  * Runtime detection of OMAP3 features
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2efd645..37bbbbb 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 9fe3534..2bab4c9 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1249,7 +1249,7 @@
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce6..7a30869 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -80,6 +80,16 @@
 	help
 	  Compile in platform device definitions for FIMC controller 3
 
+config S5P_DEV_JPEG
+	bool
+	help
+	  Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_G2D
+	bool
+	help
+	  Compile in platform device definitions for G2D device
+
 config S5P_DEV_FIMD0
 	bool
 	help
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S
index 0fd591b..006bd01 100644
--- a/arch/arm/plat-s5p/sleep.S
+++ b/arch/arm/plat-s5p/sleep.S
@@ -23,9 +23,18 @@
 */
 
 #include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
 
-	.text
+/*
+ *	 The following code is located into the .data section. This is to
+ *	 allow l2x0_regs_phys to be accessed with a relative load while we
+ *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
+ *	 in the .text section as well, but some setups might insist on it to
+ *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+	.data
+	.align
 
 	/*
 	 * sleep magic, to allow the bootloader to check for an valid
@@ -39,11 +48,34 @@
 	 * s3c_cpu_resume
 	 *
 	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
 	 */
 
 ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	adr	r0, l2x0_regs_phys
+	ldr	r0, [r0]
+	ldr	r1, [r0, #L2X0_R_PHY_BASE]
+	ldr	r2, [r1, #L2X0_CTRL]
+	tst	r2, #0x1
+	bne	resume_l2on
+	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
+	str	r2, [r1, #L2X0_AUX_CTRL]
+	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
+	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
+	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
+	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
+	str	r2, [r1, #L2X0_POWER_CTRL]
+	mov	r2, #1
+	str	r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
 	b	cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	.globl l2x0_regs_phys
+l2x0_regs_phys:
+	.long	0
+#endif
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 10f7117..65c5eca 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -84,31 +84,35 @@
 
 int clk_enable(struct clk *clk)
 {
+	unsigned long flags;
+
 	if (IS_ERR(clk) || clk == NULL)
 		return -EINVAL;
 
 	clk_enable(clk->parent);
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 
 	if ((clk->usage++) == 0)
 		(clk->enable)(clk, 1);
 
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 	return 0;
 }
 
 void clk_disable(struct clk *clk)
 {
+	unsigned long flags;
+
 	if (IS_ERR(clk) || clk == NULL)
 		return;
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 
 	if ((--clk->usage) == 0)
 		(clk->enable)(clk, 0);
 
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 	clk_disable(clk->parent);
 }
 
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index a976c02..5f197dc 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -77,7 +77,7 @@
  * @gpio_info:	structure containing GPIO info for PWM timer
  * @bl_data:	structure containing Backlight control data
  */
-void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	struct platform_pwm_backlight_data *bl_data)
 {
 	int ret = 0;
@@ -115,6 +115,8 @@
 		samsung_bl_data->init = bl_data->init;
 	if (bl_data->notify)
 		samsung_bl_data->notify = bl_data->notify;
+	if (bl_data->notify_after)
+		samsung_bl_data->notify_after = bl_data->notify_after;
 	if (bl_data->exit)
 		samsung_bl_data->exit = bl_data->exit;
 	if (bl_data->check_fb)
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 98b8647..8b928f9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -57,6 +57,7 @@
 #include <plat/sdhci.h>
 #include <plat/ts.h>
 #include <plat/udc.h>
+#include <plat/udc-hs.h>
 #include <plat/usb-control.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
@@ -267,6 +268,52 @@
 };
 #endif /* CONFIG_S5P_DEV_FIMC3 */
 
+/* G2D */
+
+#ifdef CONFIG_S5P_DEV_G2D
+static struct resource s5p_g2d_resource[] = {
+	[0] = {
+		.start	= S5P_PA_G2D,
+		.end	= S5P_PA_G2D + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_2D,
+		.end	= IRQ_2D,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_g2d = {
+	.name		= "s5p-g2d",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_g2d_resource),
+	.resource	= s5p_g2d_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_G2D */
+
+#ifdef CONFIG_S5P_DEV_JPEG
+static struct resource s5p_jpeg_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_JPEG),
+};
+
+struct platform_device s5p_device_jpeg = {
+	.name		= "s5p-jpeg",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_jpeg_resource),
+	.resource	= s5p_jpeg_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /*  CONFIG_S5P_DEV_JPEG */
+
 /* FIMD0 */
 
 #ifdef CONFIG_S5P_DEV_FIMD0
@@ -758,7 +805,7 @@
 	.resource	= s3c_cfcon_resource,
 };
 
-void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
 {
 	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
 			 &s3c_device_cfcon);
@@ -876,7 +923,7 @@
 
 #ifdef CONFIG_S5P_DEV_CSIS0
 static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K),
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
 	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
 };
 
@@ -890,7 +937,7 @@
 
 #ifdef CONFIG_S5P_DEV_CSIS1
 static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K),
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
 	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
 };
 
@@ -1038,7 +1085,7 @@
 	.resource	= s3c64xx_onenand1_resources,
 };
 
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
 {
 	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
 			 &s3c64xx_device_onenand1);
@@ -1398,7 +1445,7 @@
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 
@@ -1412,6 +1459,19 @@
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 };
+
+void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
+{
+	struct s3c_hsotg_plat *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
+			&s3c_device_usb_hsotg);
+
+	if (!npd->phy_init)
+		npd->phy_init = s5p_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s5p_usb_phy_exit;
+}
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
 /* USB High Spped 2.0 Device (Gadget) */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0..5e7972d 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -79,6 +79,8 @@
 extern struct platform_device s5p_device_fimc2;
 extern struct platform_device s5p_device_fimc3;
 extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_jpeg;
+extern struct platform_device s5p_device_g2d;
 extern struct platform_device s5p_device_fimd0;
 extern struct platform_device s5p_device_hdmi;
 extern struct platform_device s5p_device_i2c_hdmiphy;
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
index a111ad8..fcf2796 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -25,8 +25,9 @@
 #define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
 
 #define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
-#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
 #define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
 
 #define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
@@ -42,7 +43,7 @@
 
 #define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
 #define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
 #define S3C_RSTCON_PHY				(1 << 0)
 
 #define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
index a22a4f2..c9e3667 100644
--- a/arch/arm/plat-samsung/include/plat/udc-hs.h
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -26,4 +26,9 @@
 struct s3c_hsotg_plat {
 	enum s3c_hsotg_dmamode	dma;
 	unsigned int		is_osc : 1;
+
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
 };
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 0c77e42..abb5bde 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -145,11 +145,13 @@
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 8181293..16a24b1 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -30,9 +30,6 @@
 #define cpu_is_at91sam9261()	(0)
 #define cpu_is_at91sam9263()	(0)
 #define cpu_is_at91sam9rl()	(0)
-#define cpu_is_at91cap9()	(0)
-#define cpu_is_at91cap9_revB()	(0)
-#define cpu_is_at91cap9_revC()	(0)
 #define cpu_is_at91sam9g10()	(0)
 #define cpu_is_at91sam9g20()	(0)
 #define cpu_is_at91sam9g45()	(0)
diff --git a/arch/c6x/include/asm/processor.h b/arch/c6x/include/asm/processor.h
index 8154c4e..77ecbde 100644
--- a/arch/c6x/include/asm/processor.h
+++ b/arch/c6x/include/asm/processor.h
@@ -122,8 +122,8 @@
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 7da4d00..a7193ae 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -146,7 +146,7 @@
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 
diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c
index 24f5469..e215070 100644
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -96,7 +96,7 @@
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();
diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig
index 4479fd6..28c6b27 100644
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ b/arch/mips/configs/nlm_xlp_defconfig
@@ -8,7 +8,7 @@
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index 7c68666..d0b857d 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -8,7 +8,7 @@
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
index 3b0b6e8..7fda0ce 100644
--- a/arch/mips/configs/powertv_defconfig
+++ b/arch/mips/configs/powertv_defconfig
@@ -6,7 +6,7 @@
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
index 556e1be..fb9975c 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index d417909..da9bd7d 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 58fe71a..d5e950a 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cc4a3f1..d79ae54 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1135,7 +1135,7 @@
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index a81176f..924da5e 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -69,7 +69,6 @@
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 937cf33..69ebd58 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -42,6 +42,8 @@
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-		tsk->maj_flt++;
-	} else {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
-		tsk->min_flt++;
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+						  regs, address);
+			tsk->maj_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index aec2b11..1552150 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -279,7 +279,6 @@
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-		dev = pci_dev_b(ln);
-
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index 86b98e9..62ead66 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 8e93b21..4642f56 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -102,7 +102,7 @@
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 74b8db1..4a52590 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -322,7 +322,7 @@
 	__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
 }
 
-static struct clk_ops ivdr_clk_ops = {
+static struct sh_clk_ops ivdr_clk_ops = {
 	.enable		= ivdr_clk_enable,
 	.disable	= ivdr_clk_disable,
 };
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 486d1ac..27a2314 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -167,7 +167,7 @@
 	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
 }
 
-static struct clk_ops sdk7786_pcie_clk_ops = {
+static struct sh_clk_ops sdk7786_pcie_clk_ops = {
 	.enable		= sdk7786_pcie_clk_enable,
 	.disable	= sdk7786_pcie_clk_disable,
 };
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index 803d4c7..0390a07 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -4,7 +4,7 @@
 #include <linux/sh_clk.h>
 
 /* Should be defined by processor-specific code */
-void __deprecated arch_init_clk_ops(struct clk_ops **, int type);
+void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
 int __init arch_clk_init(void);
 
 /* arch/sh/kernel/cpu/clock-cpg.c */
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index 5b7f12e..e80252a 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -28,7 +28,7 @@
 	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
-static struct clk_ops sh7619_master_clk_ops = {
+static struct sh_clk_ops sh7619_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -38,7 +38,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7619_module_clk_ops = {
+static struct sh_clk_ops sh7619_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -47,22 +47,22 @@
 	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
-static struct clk_ops sh7619_bus_clk_ops = {
+static struct sh_clk_ops sh7619_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static struct clk_ops sh7619_cpu_clk_ops = {
+static struct sh_clk_ops sh7619_cpu_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
-static struct clk_ops *sh7619_clk_ops[] = {
+static struct sh_clk_ops *sh7619_clk_ops[] = {
 	&sh7619_master_clk_ops,
 	&sh7619_module_clk_ops,
 	&sh7619_bus_clk_ops,
 	&sh7619_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
 	    test_mode_pin(MODE_PIN2 | MODE_PIN1))
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 1174e2d..532a36c 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -30,7 +30,7 @@
 	       pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7201_master_clk_ops = {
+static struct sh_clk_ops sh7201_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -40,7 +40,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7201_module_clk_ops = {
+static struct sh_clk_ops sh7201_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -50,7 +50,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7201_bus_clk_ops = {
+static struct sh_clk_ops sh7201_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -60,18 +60,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7201_cpu_clk_ops = {
+static struct sh_clk_ops sh7201_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7201_clk_ops[] = {
+static struct sh_clk_ops *sh7201_clk_ops[] = {
 	&sh7201_master_clk_ops,
 	&sh7201_module_clk_ops,
 	&sh7201_bus_clk_ops,
 	&sh7201_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
 		pll2_mult = 1;
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 95a008e..529f719 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -32,7 +32,7 @@
 	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
 }
 
-static struct clk_ops sh7203_master_clk_ops = {
+static struct sh_clk_ops sh7203_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7203_module_clk_ops = {
+static struct sh_clk_ops sh7203_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -52,22 +52,22 @@
 	return clk->parent->rate / pfc_divisors[idx-2];
 }
 
-static struct clk_ops sh7203_bus_clk_ops = {
+static struct sh_clk_ops sh7203_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static struct clk_ops sh7203_cpu_clk_ops = {
+static struct sh_clk_ops sh7203_cpu_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
-static struct clk_ops *sh7203_clk_ops[] = {
+static struct sh_clk_ops *sh7203_clk_ops[] = {
 	&sh7203_master_clk_ops,
 	&sh7203_module_clk_ops,
 	&sh7203_bus_clk_ops,
 	&sh7203_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN1))
 		pll2_mult = 4;
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index 3c314d7..1777898 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -29,7 +29,7 @@
 	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7206_master_clk_ops = {
+static struct sh_clk_ops sh7206_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -39,7 +39,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7206_module_clk_ops = {
+static struct sh_clk_ops sh7206_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -48,7 +48,7 @@
 	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7206_bus_clk_ops = {
+static struct sh_clk_ops sh7206_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -58,18 +58,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7206_cpu_clk_ops = {
+static struct sh_clk_ops sh7206_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7206_clk_ops[] = {
+static struct sh_clk_ops *sh7206_clk_ops[] = {
 	&sh7206_master_clk_ops,
 	&sh7206_module_clk_ops,
 	&sh7206_bus_clk_ops,
 	&sh7206_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
 		pll2_mult = 1;
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
index b78384a..90faa44 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -34,7 +34,7 @@
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh3_master_clk_ops = {
+static struct sh_clk_ops sh3_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -46,7 +46,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh3_module_clk_ops = {
+static struct sh_clk_ops sh3_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -58,7 +58,7 @@
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh3_bus_clk_ops = {
+static struct sh_clk_ops sh3_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -70,18 +70,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh3_cpu_clk_ops = {
+static struct sh_clk_ops sh3_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh3_clk_ops[] = {
+static struct sh_clk_ops *sh3_clk_ops[] = {
 	&sh3_master_clk_ops,
 	&sh3_module_clk_ops,
 	&sh3_bus_clk_ops,
 	&sh3_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh3_clk_ops))
 		*ops = sh3_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
index 0ecea14..a8da4a9 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -35,7 +35,7 @@
 	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
 }
 
-static struct clk_ops sh7705_master_clk_ops = {
+static struct sh_clk_ops sh7705_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -45,7 +45,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7705_module_clk_ops = {
+static struct sh_clk_ops sh7705_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -55,7 +55,7 @@
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh7705_bus_clk_ops = {
+static struct sh_clk_ops sh7705_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -65,18 +65,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7705_cpu_clk_ops = {
+static struct sh_clk_ops sh7705_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7705_clk_ops[] = {
+static struct sh_clk_ops *sh7705_clk_ops[] = {
 	&sh7705_master_clk_ops,
 	&sh7705_module_clk_ops,
 	&sh7705_bus_clk_ops,
 	&sh7705_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7705_clk_ops))
 		*ops = sh7705_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
index 6f9ff8b..a4088e5 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -30,7 +30,7 @@
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh7706_master_clk_ops = {
+static struct sh_clk_ops sh7706_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7706_module_clk_ops = {
+static struct sh_clk_ops sh7706_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -54,7 +54,7 @@
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh7706_bus_clk_ops = {
+static struct sh_clk_ops sh7706_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -66,18 +66,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7706_cpu_clk_ops = {
+static struct sh_clk_ops sh7706_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7706_clk_ops[] = {
+static struct sh_clk_ops *sh7706_clk_ops[] = {
 	&sh7706_master_clk_ops,
 	&sh7706_module_clk_ops,
 	&sh7706_bus_clk_ops,
 	&sh7706_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7706_clk_ops))
 		*ops = sh7706_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index f302ba0..54a6d4b 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -30,7 +30,7 @@
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh7709_master_clk_ops = {
+static struct sh_clk_ops sh7709_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7709_module_clk_ops = {
+static struct sh_clk_ops sh7709_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -55,7 +55,7 @@
 	return clk->parent->rate * stc_multipliers[idx];
 }
 
-static struct clk_ops sh7709_bus_clk_ops = {
+static struct sh_clk_ops sh7709_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -67,18 +67,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7709_cpu_clk_ops = {
+static struct sh_clk_ops sh7709_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7709_clk_ops[] = {
+static struct sh_clk_ops *sh7709_clk_ops[] = {
 	&sh7709_master_clk_ops,
 	&sh7709_module_clk_ops,
 	&sh7709_bus_clk_ops,
 	&sh7709_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7709_clk_ops))
 		*ops = sh7709_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
index 29a87d8..ce601b2 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
@@ -29,7 +29,7 @@
 	clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
 }
 
-static struct clk_ops sh7710_master_clk_ops = {
+static struct sh_clk_ops sh7710_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -39,7 +39,7 @@
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_module_clk_ops = {
+static struct sh_clk_ops sh7710_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -49,7 +49,7 @@
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_bus_clk_ops = {
+static struct sh_clk_ops sh7710_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -59,18 +59,18 @@
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_cpu_clk_ops = {
+static struct sh_clk_ops sh7710_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7710_clk_ops[] = {
+static struct sh_clk_ops *sh7710_clk_ops[] = {
 	&sh7710_master_clk_ops,
 	&sh7710_module_clk_ops,
 	&sh7710_bus_clk_ops,
 	&sh7710_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7710_clk_ops))
 		*ops = sh7710_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
index b0d0c52..21438a9 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
@@ -29,7 +29,7 @@
 	clk->rate *= multipliers[idx];
 }
 
-static struct clk_ops sh7712_master_clk_ops = {
+static struct sh_clk_ops sh7712_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -41,7 +41,7 @@
 	return clk->parent->rate / divisors[idx];
 }
 
-static struct clk_ops sh7712_module_clk_ops = {
+static struct sh_clk_ops sh7712_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -53,17 +53,17 @@
 	return clk->parent->rate / divisors[idx];
 }
 
-static struct clk_ops sh7712_cpu_clk_ops = {
+static struct sh_clk_ops sh7712_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7712_clk_ops[] = {
+static struct sh_clk_ops *sh7712_clk_ops[] = {
 	&sh7712_master_clk_ops,
 	&sh7712_module_clk_ops,
 	&sh7712_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7712_clk_ops))
 		*ops = sh7712_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index f4e262a..4b5bab5 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -41,7 +41,7 @@
 	return 5;
 }
 
-static struct clk_ops sh4202_emi_clk_ops = {
+static struct sh_clk_ops sh4202_emi_clk_ops = {
 	.recalc		= emi_clk_recalc,
 };
 
@@ -56,7 +56,7 @@
 	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
-static struct clk_ops sh4202_femi_clk_ops = {
+static struct sh_clk_ops sh4202_femi_clk_ops = {
 	.recalc		= femi_clk_recalc,
 };
 
@@ -130,7 +130,7 @@
 	return 0;
 }
 
-static struct clk_ops sh4202_shoc_clk_ops = {
+static struct sh_clk_ops sh4202_shoc_clk_ops = {
 	.init		= shoc_clk_init,
 	.recalc		= shoc_clk_recalc,
 	.set_rate	= shoc_clk_set_rate,
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
index 5add75c..99e5ec8 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -31,7 +31,7 @@
 	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
 }
 
-static struct clk_ops sh4_master_clk_ops = {
+static struct sh_clk_ops sh4_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -41,7 +41,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh4_module_clk_ops = {
+static struct sh_clk_ops sh4_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -51,7 +51,7 @@
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
-static struct clk_ops sh4_bus_clk_ops = {
+static struct sh_clk_ops sh4_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -61,18 +61,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh4_cpu_clk_ops = {
+static struct sh_clk_ops sh4_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh4_clk_ops[] = {
+static struct sh_clk_ops *sh4_clk_ops[] = {
 	&sh4_master_clk_ops,
 	&sh4_module_clk_ops,
 	&sh4_bus_clk_ops,
 	&sh4_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh4_clk_ops))
 		*ops = sh4_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 70e45bd..ea01a72 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -61,7 +61,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops dll_clk_ops = {
+static struct sh_clk_ops dll_clk_ops = {
 	.recalc		= dll_recalc,
 };
 
@@ -81,7 +81,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 3c31650..7ac07b4 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -61,7 +61,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops dll_clk_ops = {
+static struct sh_clk_ops dll_clk_ops = {
 	.recalc		= dll_recalc,
 };
 
@@ -84,7 +84,7 @@
 	return (clk->parent->rate * mult) / div;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 212c72e..8e1f970 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -64,7 +64,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops dll_clk_ops = {
+static struct sh_clk_ops dll_clk_ops = {
 	.recalc		= dll_recalc,
 };
 
@@ -87,7 +87,7 @@
 	return (clk->parent->rate * mult) / div;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index 2f8c917..35f75cf 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -65,7 +65,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops dll_clk_ops = {
+static struct sh_clk_ops dll_clk_ops = {
 	.recalc		= dll_recalc,
 };
 
@@ -88,7 +88,7 @@
 	return (clk->parent->rate * mult) / div;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 70bd966..2a87901 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -70,7 +70,7 @@
 	return (clk->parent->rate * mult) / div;
 }
 
-static struct clk_ops fll_clk_ops = {
+static struct sh_clk_ops fll_clk_ops = {
 	.recalc		= fll_recalc,
 };
 
@@ -90,7 +90,7 @@
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
@@ -105,7 +105,7 @@
 	return clk->parent->rate / 3;
 }
 
-static struct clk_ops div3_clk_ops = {
+static struct sh_clk_ops div3_clk_ops = {
 	.recalc		= div3_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 0fbff14..bcddcdf 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -33,7 +33,7 @@
 	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 2d4c7fd..7707e35a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -27,7 +27,7 @@
 	clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
 }
 
-static struct clk_ops sh7763_master_clk_ops = {
+static struct sh_clk_ops sh7763_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -37,7 +37,7 @@
 	return clk->parent->rate / p0fc_divisors[idx];
 }
 
-static struct clk_ops sh7763_module_clk_ops = {
+static struct sh_clk_ops sh7763_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -47,22 +47,22 @@
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
-static struct clk_ops sh7763_bus_clk_ops = {
+static struct sh_clk_ops sh7763_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static struct clk_ops sh7763_cpu_clk_ops = {
+static struct sh_clk_ops sh7763_cpu_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
-static struct clk_ops *sh7763_clk_ops[] = {
+static struct sh_clk_ops *sh7763_clk_ops[] = {
 	&sh7763_master_clk_ops,
 	&sh7763_module_clk_ops,
 	&sh7763_bus_clk_ops,
 	&sh7763_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7763_clk_ops))
 		*ops = sh7763_clk_ops[idx];
@@ -74,7 +74,7 @@
 	return clk->parent->rate / cfc_divisors[idx];
 }
 
-static struct clk_ops sh7763_shyway_clk_ops = {
+static struct sh_clk_ops sh7763_shyway_clk_ops = {
 	.recalc		= shyway_clk_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index 9e33543..5d36f33 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -24,7 +24,7 @@
 	clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
 }
 
-static struct clk_ops sh7770_master_clk_ops = {
+static struct sh_clk_ops sh7770_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -34,7 +34,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7770_module_clk_ops = {
+static struct sh_clk_ops sh7770_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -44,7 +44,7 @@
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
-static struct clk_ops sh7770_bus_clk_ops = {
+static struct sh_clk_ops sh7770_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -54,18 +54,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7770_cpu_clk_ops = {
+static struct sh_clk_ops sh7770_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7770_clk_ops[] = {
+static struct sh_clk_ops *sh7770_clk_ops[] = {
 	&sh7770_master_clk_ops,
 	&sh7770_module_clk_ops,
 	&sh7770_bus_clk_ops,
 	&sh7770_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7770_clk_ops))
 		*ops = sh7770_clk_ops[idx];
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 3b53348..793dae4 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -27,7 +27,7 @@
 	clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
 }
 
-static struct clk_ops sh7780_master_clk_ops = {
+static struct sh_clk_ops sh7780_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -37,7 +37,7 @@
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7780_module_clk_ops = {
+static struct sh_clk_ops sh7780_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -47,7 +47,7 @@
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
-static struct clk_ops sh7780_bus_clk_ops = {
+static struct sh_clk_ops sh7780_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -57,18 +57,18 @@
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7780_cpu_clk_ops = {
+static struct sh_clk_ops sh7780_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7780_clk_ops[] = {
+static struct sh_clk_ops *sh7780_clk_ops[] = {
 	&sh7780_master_clk_ops,
 	&sh7780_module_clk_ops,
 	&sh7780_bus_clk_ops,
 	&sh7780_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7780_clk_ops))
 		*ops = sh7780_clk_ops[idx];
@@ -80,7 +80,7 @@
 	return clk->parent->rate / cfc_divisors[idx];
 }
 
-static struct clk_ops sh7780_shyway_clk_ops = {
+static struct sh_clk_ops sh7780_shyway_clk_ops = {
 	.recalc		= shyway_clk_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index e5b420c..bf34ccf 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -36,7 +36,7 @@
 	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index f6c0c3d..4917094 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -38,7 +38,7 @@
 	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index bf2d00b..0f11b39 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -32,7 +32,7 @@
 	return clk->parent->rate * 72;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
index 9cfc19b..c48b93d 100644
--- a/arch/sh/kernel/cpu/sh5/clock-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -28,7 +28,7 @@
 	clk->rate *= ifc_table[idx];
 }
 
-static struct clk_ops sh5_master_clk_ops = {
+static struct sh_clk_ops sh5_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -38,7 +38,7 @@
 	return clk->parent->rate / ifc_table[idx];
 }
 
-static struct clk_ops sh5_module_clk_ops = {
+static struct sh_clk_ops sh5_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -48,7 +48,7 @@
 	return clk->parent->rate / ifc_table[idx];
 }
 
-static struct clk_ops sh5_bus_clk_ops = {
+static struct sh_clk_ops sh5_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -58,18 +58,18 @@
 	return clk->parent->rate / ifc_table[idx];
 }
 
-static struct clk_ops sh5_cpu_clk_ops = {
+static struct sh_clk_ops sh5_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh5_clk_ops[] = {
+static struct sh_clk_ops *sh5_clk_ops[] = {
 	&sh5_master_clk_ops,
 	&sh5_module_clk_ops,
 	&sh5_bus_clk_ops,
 	&sh5_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024);
 	BUG_ON(!cprc_base);
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index fd84387..39e4909 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -315,6 +315,13 @@
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
@@ -410,13 +417,6 @@
 
 	set_brk(current->mm->start_brk, current->mm->brk);
 
-	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) {
-		/* Someone check-me: is this error path enough? */
-		send_sig(SIGKILL, current, 0);
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index fc45ba8..e395693 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -48,9 +48,9 @@
 }
 
 /* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
 {
-	unsigned long bclock, now;
+	u32 bclock, now, loops = __loops;
 	int cpu;
 
 	preempt_disable();
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index f581a18..8ecbb4b 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -333,13 +333,15 @@
 		 * Lookup failure means no vma is above this address,
 		 * i.e. return with success:
 		 */
-		if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+		vma = find_vma(mm, addr);
+		if (!vma)
 			return addr;
 
 		/*
 		 * new region fits between prev_vma->vm_end and
 		 * vma->vm_start, use it:
 		 */
+		prev_vma = vma->vm_prev;
 		if (addr + len <= vma->vm_start &&
 		            (!prev_vma || (addr >= prev_vma->vm_end))) {
 			/* remember the address as a hint for next time */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index a312e76..49a5cb5 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -60,6 +60,16 @@
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
@@ -282,9 +292,6 @@
 	int i;
 	struct resource *res, *root, *conflict;
 
-	if (!pci_use_crs)
-		return;
-
 	coalesce_windows(info, IORESOURCE_MEM);
 	coalesce_windows(info, IORESOURCE_IO);
 
@@ -336,8 +343,13 @@
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
-	add_resources(&info);
-	return;
+	if (pci_use_crs) {
+		add_resources(&info);
+
+		return;
+	}
+
+	kfree(info.name);
 
 name_alloc_fail:
 	kfree(info.res);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 9baf11e..744f078 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3832,7 +3832,7 @@
 	bio.bi_size = size;
 	bio.bi_bdev = bdev;
 	bio.bi_sector = 0;
-	bio.bi_flags = BIO_QUIET;
+	bio.bi_flags = (1 << BIO_QUIET);
 	init_completion(&complete);
 	bio.bi_private = &complete;
 	bio.bi_end_io = floppy_rb0_complete;
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
index 4a5b099..53404af 100644
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -321,6 +321,8 @@
 	cdv_get_core_freq(dev);
 	gma_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
+	REG_WRITE(PORT_HOTPLUG_EN, 0);
+	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 830dfdd6b..be61673 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -247,7 +247,6 @@
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = psbfb_pan,
 	.fb_mmap = psbfb_mmap,
-	.fb_sync = psbfb_sync,
 	.fb_ioctl = psbfb_ioctl,
 };
 
diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c
index 5d5330f..aff194f 100644
--- a/drivers/gpu/drm/gma500/gtt.c
+++ b/drivers/gpu/drm/gma500/gtt.c
@@ -446,10 +446,9 @@
 	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
 	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
 								>> PAGE_SHIFT;
-	/* Some CDV firmware doesn't report this currently. In which case the
-	   system has 64 gtt pages */
+	/* CDV doesn't report this. In which case the system has 64 gtt pages */
 	if (pg->gtt_start == 0 || gtt_pages == 0) {
-		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
 		gtt_pages = 64;
 		pg->gtt_start = dev_priv->pge_ctl;
 	}
@@ -461,10 +460,10 @@
 
 	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
 		static struct resource fudge;	/* Preferably peppermint */
-		/* This can occur on CDV SDV systems. Fudge it in this case.
+		/* This can occur on CDV systems. Fudge it in this case.
 		   We really don't care what imaginary space is being allocated
 		   at this point */
-		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
 		pg->gatt_start = 0x40000000;
 		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
 		/* This is a little confusing but in fact the GTT is providing
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index fbcd848..17ca72c 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2362,6 +2362,9 @@
 	uint64_t addr = semaphore->gpu_addr;
 	unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL;
 
+	if (rdev->family < CHIP_CAYMAN)
+		sel |= PACKET3_SEM_WAIT_ON_SIGNAL;
+
 	radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1));
 	radeon_ring_write(ring, addr & 0xffffffff);
 	radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);
diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.c b/drivers/gpu/drm/radeon/r600_blit_shaders.c
index 2d1f6c5..73e2c7c 100644
--- a/drivers/gpu/drm/radeon/r600_blit_shaders.c
+++ b/drivers/gpu/drm/radeon/r600_blit_shaders.c
@@ -314,6 +314,10 @@
 	0x00000000, /* VGT_VTX_CNT_EN */
 
 	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
+	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
 
@@ -626,6 +630,10 @@
 	0x00000000, /* VGT_VTX_CNT_EN */
 
 	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
+	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
 
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 3ee1fd7..9b23670 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -831,6 +831,7 @@
 #define	PACKET3_STRMOUT_BUFFER_UPDATE			0x34
 #define	PACKET3_INDIRECT_BUFFER_MP			0x38
 #define	PACKET3_MEM_SEMAPHORE				0x39
+#              define PACKET3_SEM_WAIT_ON_SIGNAL    (0x1 << 12)
 #              define PACKET3_SEM_SEL_SIGNAL	    (0x6 << 29)
 #              define PACKET3_SEM_SEL_WAIT	    (0x7 << 29)
 #define	PACKET3_MPEG_INDEX				0x3A
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 8b3d8ed..8c9a811 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1057,7 +1057,7 @@
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
 			return MODE_OK;
 		else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
-			if (ASIC_IS_DCE3(rdev)) {
+			if (0) {
 				/* HDMI 1.3+ supports max clock of 340 Mhz */
 				if (mode->clock > 340000)
 					return MODE_CLOCK_HIGH;
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 8c49fef..3d31433 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1078,15 +1078,21 @@
 	.create_handle = radeon_user_framebuffer_create_handle,
 };
 
-void
+int
 radeon_framebuffer_init(struct drm_device *dev,
 			struct radeon_framebuffer *rfb,
 			struct drm_mode_fb_cmd2 *mode_cmd,
 			struct drm_gem_object *obj)
 {
+	int ret;
 	rfb->obj = obj;
-	drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	if (ret) {
+		rfb->obj = NULL;
+		return ret;
+	}
 	drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd);
+	return 0;
 }
 
 static struct drm_framebuffer *
@@ -1096,6 +1102,7 @@
 {
 	struct drm_gem_object *obj;
 	struct radeon_framebuffer *radeon_fb;
+	int ret;
 
 	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
@@ -1108,7 +1115,12 @@
 	if (radeon_fb == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	if (ret) {
+		kfree(radeon_fb);
+		drm_gem_object_unreference_unlocked(obj);
+		return NULL;
+	}
 
 	return &radeon_fb->base;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 9419c51..26e9270 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -307,8 +307,6 @@
 bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 				    u32 pixel_clock)
 {
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *dig_connector;
@@ -326,7 +324,7 @@
 	case DRM_MODE_CONNECTOR_HDMIB:
 		if (radeon_connector->use_digital) {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else
@@ -348,7 +346,7 @@
 			return false;
 		else {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index cf2bf35..195471c 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -209,6 +209,11 @@
 							  sizes->surface_depth);
 
 	ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj);
+	if (ret) {
+		DRM_ERROR("failed to create fbcon object %d\n", ret);
+		return ret;
+	}
+
 	rbo = gem_to_radeon_bo(gobj);
 
 	/* okay we have an object now allocate the framebuffer */
@@ -220,7 +225,11 @@
 
 	info->par = rfbdev;
 
-	radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	if (ret) {
+		DRM_ERROR("failed to initalise framebuffer %d\n", ret);
+		goto out_unref;
+	}
 
 	fb = &rfbdev->rfb.base;
 
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 4330e32..8a85598 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -649,7 +649,7 @@
 				     u16 blue, int regno);
 extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
 				     u16 *blue, int regno);
-void radeon_framebuffer_init(struct drm_device *dev,
+int radeon_framebuffer_init(struct drm_device *dev,
 			     struct radeon_framebuffer *rfb,
 			     struct drm_mode_fb_cmd2 *mode_cmd,
 			     struct drm_gem_object *obj);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b8574cd..63552e3 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -59,6 +59,9 @@
 #define USB_VENDOR_ID_AIRCABLE		0x16CA
 #define USB_DEVICE_ID_AIRCABLE1		0x1502
 
+#define USB_VENDOR_ID_AIREN		0x1a2c
+#define USB_DEVICE_ID_AIREN_SLIMPLUS	0x0002
+
 #define USB_VENDOR_ID_ALCOR		0x058f
 #define USB_DEVICE_ID_ALCOR_USBRS232	0x9720
 
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 9333d69..627850a 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -986,8 +986,13 @@
 		return;
 	}
 
-	/* Ignore out-of-range values as per HID specification, section 5.10 */
-	if (value < field->logical_minimum || value > field->logical_maximum) {
+	/*
+	 * Ignore out-of-range values as per HID specification,
+	 * section 5.10 and 6.2.25
+	 */
+	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+	    (value < field->logical_minimum ||
+	     value > field->logical_maximum)) {
 		dbg_hid("Ignoring out-of-range value %x\n", value);
 		return;
 	}
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index c831af9..57d4e1e 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -54,6 +54,7 @@
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
 
+	{ USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0226040..dad895f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -497,8 +497,9 @@
 	  If you say yes here, you get support for JEDEC JC42.4 compliant
 	  temperature sensors, which are used on many DDR3 memory modules for
 	  mobile devices and servers.  Support will include, but not be limited
-	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
+	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
+	  MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
+	  STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 28c09ee..b927ee5 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -64,6 +64,7 @@
 
 /* Manufacturer IDs */
 #define ADT_MANID		0x11d4  /* Analog Devices */
+#define ATMEL_MANID		0x001f  /* Atmel */
 #define MAX_MANID		0x004d  /* Maxim */
 #define IDT_MANID		0x00b3  /* IDT */
 #define MCP_MANID		0x0054  /* Microchip */
@@ -77,15 +78,25 @@
 #define ADT7408_DEVID		0x0801
 #define ADT7408_DEVID_MASK	0xffff
 
+/* Atmel */
+#define AT30TS00_DEVID		0x8201
+#define AT30TS00_DEVID_MASK	0xffff
+
 /* IDT */
 #define TS3000B3_DEVID		0x2903  /* Also matches TSE2002B3 */
 #define TS3000B3_DEVID_MASK	0xffff
 
+#define TS3000GB2_DEVID		0x2912  /* Also matches TSE2002GB2 */
+#define TS3000GB2_DEVID_MASK	0xffff
+
 /* Maxim */
 #define MAX6604_DEVID		0x3e00
 #define MAX6604_DEVID_MASK	0xffff
 
 /* Microchip */
+#define MCP9804_DEVID		0x0200
+#define MCP9804_DEVID_MASK	0xfffc
+
 #define MCP98242_DEVID		0x2000
 #define MCP98242_DEVID_MASK	0xfffc
 
@@ -113,6 +124,12 @@
 #define STTS424E_DEVID		0x0000
 #define STTS424E_DEVID_MASK	0xfffe
 
+#define STTS2002_DEVID		0x0300
+#define STTS2002_DEVID_MASK	0xffff
+
+#define STTS3000_DEVID		0x0200
+#define STTS3000_DEVID_MASK	0xffff
+
 static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
 
 struct jc42_chips {
@@ -123,8 +140,11 @@
 
 static struct jc42_chips jc42_chips[] = {
 	{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
+	{ ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
 	{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
+	{ IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK },
 	{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
+	{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
 	{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
 	{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
 	{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
@@ -133,6 +153,8 @@
 	{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
 	{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
 	{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
+	{ STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
+	{ STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
 };
 
 /* Each client has this additional data */
@@ -159,10 +181,12 @@
 
 static const struct i2c_device_id jc42_id[] = {
 	{ "adt7408", 0 },
+	{ "at30ts00", 0 },
 	{ "cat94ts02", 0 },
 	{ "cat6095", 0 },
 	{ "jc42", 0 },
 	{ "max6604", 0 },
+	{ "mcp9804", 0 },
 	{ "mcp9805", 0 },
 	{ "mcp98242", 0 },
 	{ "mcp98243", 0 },
@@ -171,8 +195,10 @@
 	{ "se97b", 0 },
 	{ "se98", 0 },
 	{ "stts424", 0 },
-	{ "tse2002b3", 0 },
-	{ "ts3000b3", 0 },
+	{ "stts2002", 0 },
+	{ "stts3000", 0 },
+	{ "tse2002", 0 },
+	{ "ts3000", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, jc42_id);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 00460d8..d89b339 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -54,7 +54,8 @@
 						   lcrit_alarm, crit_alarm */
 #define PMBUS_IOUT_BOOLEANS_PER_PAGE	3	/* alarm, lcrit_alarm,
 						   crit_alarm */
-#define PMBUS_POUT_BOOLEANS_PER_PAGE	2	/* alarm, crit_alarm */
+#define PMBUS_POUT_BOOLEANS_PER_PAGE	3	/* cap_alarm, alarm, crit_alarm
+						 */
 #define PMBUS_MAX_BOOLEANS_PER_FAN	2	/* alarm, fault */
 #define PMBUS_MAX_BOOLEANS_PER_TEMP	4	/* min_alarm, max_alarm,
 						   lcrit_alarm, crit_alarm */
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 48c7b4a..880b90c 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -33,6 +33,7 @@
 struct zl6100_data {
 	int id;
 	ktime_t access;		/* chip access time */
+	int delay;		/* Delay between chip accesses in uS */
 	struct pmbus_driver_info info;
 };
 
@@ -52,10 +53,10 @@
 /* Some chips need a delay between accesses */
 static inline void zl6100_wait(const struct zl6100_data *data)
 {
-	if (delay) {
+	if (data->delay) {
 		s64 delta = ktime_us_delta(ktime_get(), data->access);
-		if (delta < delay)
-			udelay(delay - delta);
+		if (delta < data->delay)
+			udelay(data->delay - delta);
 	}
 }
 
@@ -207,8 +208,9 @@
 	 * can be cleared later for additional chips if tests show that it
 	 * is not needed (in other words, better be safe than sorry).
 	 */
+	data->delay = delay;
 	if (data->id == zl2004 || data->id == zl6105)
-		delay = 0;
+		data->delay = 0;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index afc166f..7df5bfe 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -332,7 +332,7 @@
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
 	struct input_event event;
-	int retval;
+	int retval = 0;
 
 	if (count < input_event_size())
 		return -EINVAL;
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 3765137..f3bc418 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -172,7 +172,7 @@
 }
 
 /*** Module ***/
-#if CONFIG_PM
+#if CONFIG_PM_SLEEP
 static int twl4030_vibra_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -189,10 +189,10 @@
 	vibra_disable_leds();
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
 			 twl4030_vibra_suspend, twl4030_vibra_resume);
-#endif
 
 static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
 {
@@ -273,9 +273,7 @@
 	.driver		= {
 		.name	= "twl4030-vibra",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &twl4030_vibra_pm_ops,
-#endif
 	},
 };
 module_platform_driver(twl4030_vibra_driver);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index bd87380..4c6a72d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -952,7 +952,9 @@
 
 	/*
 	 * First try "E6 report".
-	 * ALPS should return 0,0,10 or 0,0,100
+	 * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
+	 * The bits 0-2 of the first byte will be 1s if some buttons are
+	 * pressed.
 	 */
 	param[0] = 0;
 	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
@@ -968,7 +970,8 @@
 	psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
 		    param[0], param[1], param[2]);
 
-	if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
+	if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
+	    (param[2] != 10 && param[2] != 100))
 		return NULL;
 
 	/*
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index 58a8775..e53f408 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -77,6 +77,8 @@
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on USB_ARCH_HAS_HCD
 	select USB
+	select NEW_LEDS
+	select LEDS_CLASS
 	help
 	  Say Y here if you want to use the USB version of the Wacom Intuos
 	  or Graphire tablet.  Make sure to say Y to "Mouse support"
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 88672ec..cd3ed29 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -926,7 +926,7 @@
 {
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
-	int count = data[1] & 0x03;
+	int count = data[1] & 0x07;
 	int i;
 
 	if (data[0] != 0x02)
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index bdea288..a35e98a 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -275,7 +275,7 @@
 }
 
 /* Programs the physical address of the device table into the IOMMU hardware */
-static void __init iommu_set_device_table(struct amd_iommu *iommu)
+static void iommu_set_device_table(struct amd_iommu *iommu)
 {
 	u64 entry;
 
diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 9fb18c1..b280c43 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -323,7 +323,7 @@
 	 * Corrupt successful READs while in down state.
 	 * If flags were specified, only corrupt those that match.
 	 */
-	if (!error && bio_submitted_while_down &&
+	if (fc->corrupt_bio_byte && !error && bio_submitted_while_down &&
 	    (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) &&
 	    all_corrupt_bio_flags_match(bio, fc))
 		corrupt_bio_data(bio, fc);
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index ad2eba4..ea5dd28 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -296,6 +296,8 @@
 	unsigned offset;
 	unsigned num_bvecs;
 	sector_t remaining = where->count;
+	struct request_queue *q = bdev_get_queue(where->bdev);
+	sector_t discard_sectors;
 
 	/*
 	 * where->count may be zero if rw holds a flush and we need to
@@ -305,9 +307,12 @@
 		/*
 		 * Allocate a suitably sized-bio.
 		 */
-		num_bvecs = dm_sector_div_up(remaining,
-					     (PAGE_SIZE >> SECTOR_SHIFT));
-		num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs);
+		if (rw & REQ_DISCARD)
+			num_bvecs = 1;
+		else
+			num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev),
+					  dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT)));
+
 		bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
 		bio->bi_sector = where->sector + (where->count - remaining);
 		bio->bi_bdev = where->bdev;
@@ -315,10 +320,14 @@
 		bio->bi_destructor = dm_bio_destructor;
 		store_io_and_region_in_bio(bio, io, region);
 
-		/*
-		 * Try and add as many pages as possible.
-		 */
-		while (remaining) {
+		if (rw & REQ_DISCARD) {
+			discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining);
+			bio->bi_size = discard_sectors << SECTOR_SHIFT;
+			remaining -= discard_sectors;
+		} else while (remaining) {
+			/*
+			 * Try and add as many pages as possible.
+			 */
 			dp->get_page(dp, &page, &len, &offset);
 			len = min(len, to_bytes(remaining));
 			if (!bio_add_page(bio, page, len, offset))
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 31c2dc2..1ce84ed 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1437,7 +1437,7 @@
 
 	if (!argc) {
 		DMWARN("Empty message received.");
-		goto out;
+		goto out_argv;
 	}
 
 	table = dm_get_live_table(md);
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 86cb7e5..787022c 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -668,7 +668,14 @@
 		return ret;
 
 	sb = page_address(rdev->sb_page);
-	if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) {
+
+	/*
+	 * Two cases that we want to write new superblocks and rebuild:
+	 * 1) New device (no matching magic number)
+	 * 2) Device specified for rebuild (!In_sync w/ offset == 0)
+	 */
+	if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) ||
+	    (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) {
 		super_sync(rdev->mddev, rdev);
 
 		set_bit(FirstUse, &rdev->flags);
@@ -745,11 +752,8 @@
 	 */
 	rdev_for_each(r, t, mddev) {
 		if (!test_bit(In_sync, &r->flags)) {
-			if (!test_bit(FirstUse, &r->flags))
-				DMERR("Superblock area of "
-				      "rebuild device %d should have been "
-				      "cleared.", r->raid_disk);
-			set_bit(FirstUse, &r->flags);
+			DMINFO("Device %d specified for rebuild: "
+			       "Clearing superblock", r->raid_disk);
 			rebuilds++;
 		} else if (test_bit(FirstUse, &r->flags))
 			new_devs++;
@@ -971,6 +975,7 @@
 
 	INIT_WORK(&rs->md.event_work, do_table_event);
 	ti->private = rs;
+	ti->num_flush_requests = 1;
 
 	mutex_lock(&rs->md.reconfig_mutex);
 	ret = md_run(&rs->md);
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
index 59c4f04..237571a 100644
--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -385,6 +385,7 @@
 		data_sm = dm_sm_disk_create(tm, nr_blocks);
 		if (IS_ERR(data_sm)) {
 			DMERR("sm_disk_create failed");
+			dm_tm_unlock(tm, sblock);
 			r = PTR_ERR(data_sm);
 			goto bad;
 		}
@@ -789,6 +790,11 @@
 	return 0;
 }
 
+/*
+ * __open_device: Returns @td corresponding to device with id @dev,
+ * creating it if @create is set and incrementing @td->open_count.
+ * On failure, @td is undefined.
+ */
 static int __open_device(struct dm_pool_metadata *pmd,
 			 dm_thin_id dev, int create,
 			 struct dm_thin_device **td)
@@ -799,10 +805,16 @@
 	struct disk_device_details details_le;
 
 	/*
-	 * Check the device isn't already open.
+	 * If the device is already open, return it.
 	 */
 	list_for_each_entry(td2, &pmd->thin_devices, list)
 		if (td2->id == dev) {
+			/*
+			 * May not create an already-open device.
+			 */
+			if (create)
+				return -EEXIST;
+
 			td2->open_count++;
 			*td = td2;
 			return 0;
@@ -817,6 +829,9 @@
 		if (r != -ENODATA || !create)
 			return r;
 
+		/*
+		 * Create new device.
+		 */
 		changed = 1;
 		details_le.mapped_blocks = 0;
 		details_le.transaction_id = cpu_to_le64(pmd->trans_id);
@@ -882,12 +897,10 @@
 
 	r = __open_device(pmd, dev, 1, &td);
 	if (r) {
-		__close_device(td);
 		dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
 		dm_btree_del(&pmd->bl_info, dev_root);
 		return r;
 	}
-	td->changed = 1;
 	__close_device(td);
 
 	return r;
@@ -967,14 +980,14 @@
 		goto bad;
 
 	r = __set_snapshot_details(pmd, td, origin, pmd->time);
+	__close_device(td);
+
 	if (r)
 		goto bad;
 
-	__close_device(td);
 	return 0;
 
 bad:
-	__close_device(td);
 	dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
 	dm_btree_remove(&pmd->details_info, pmd->details_root,
 			&key, &pmd->details_root);
@@ -1211,6 +1224,8 @@
 	if (r)
 		return r;
 
+	td->mapped_blocks--;
+	td->changed = 1;
 	pmd->need_commit = 1;
 
 	return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a368db2..a0b225e 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -624,7 +624,7 @@
 		return 1;
 
 	rcu_read_lock();
-	for (i = 0; i < conf->raid_disks; i++) {
+	for (i = 0; i < conf->raid_disks * 2; i++) {
 		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
 		if (rdev && !test_bit(Faulty, &rdev->flags)) {
 			struct request_queue *q = bdev_get_queue(rdev->bdev);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 6e8aa21..58c44d6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -67,6 +67,7 @@
 
 static void allow_barrier(struct r10conf *conf);
 static void lower_barrier(struct r10conf *conf);
+static int enough(struct r10conf *conf, int ignore);
 
 static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
 {
@@ -347,6 +348,19 @@
 		 * wait for the 'master' bio.
 		 */
 		set_bit(R10BIO_Uptodate, &r10_bio->state);
+	} else {
+		/* If all other devices that store this block have
+		 * failed, we want to return the error upwards rather
+		 * than fail the last device.  Here we redefine
+		 * "uptodate" to mean "Don't want to retry"
+		 */
+		unsigned long flags;
+		spin_lock_irqsave(&conf->device_lock, flags);
+		if (!enough(conf, rdev->raid_disk))
+			uptodate = 1;
+		spin_unlock_irqrestore(&conf->device_lock, flags);
+	}
+	if (uptodate) {
 		raid_end_bio_io(r10_bio);
 		rdev_dec_pending(rdev, conf->mddev);
 	} else {
@@ -2052,6 +2066,7 @@
 		       "md/raid10:%s: %s: Failing raid device\n",
 		       mdname(mddev), b);
 		md_error(mddev, conf->mirrors[d].rdev);
+		r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
 		return;
 	}
 
@@ -2105,8 +2120,11 @@
 				    rdev,
 				    r10_bio->devs[r10_bio->read_slot].addr
 				    + sect,
-				    s, 0))
+				    s, 0)) {
 				md_error(mddev, rdev);
+				r10_bio->devs[r10_bio->read_slot].bio
+					= IO_BLOCKED;
+			}
 			break;
 		}
 
@@ -2299,17 +2317,20 @@
 	 * This is all done synchronously while the array is
 	 * frozen.
 	 */
+	bio = r10_bio->devs[slot].bio;
+	bdevname(bio->bi_bdev, b);
+	bio_put(bio);
+	r10_bio->devs[slot].bio = NULL;
+
 	if (mddev->ro == 0) {
 		freeze_array(conf);
 		fix_read_error(conf, mddev, r10_bio);
 		unfreeze_array(conf);
-	}
+	} else
+		r10_bio->devs[slot].bio = IO_BLOCKED;
+
 	rdev_dec_pending(rdev, mddev);
 
-	bio = r10_bio->devs[slot].bio;
-	bdevname(bio->bi_bdev, b);
-	r10_bio->devs[slot].bio =
-		mddev->ro ? IO_BLOCKED : NULL;
 read_more:
 	rdev = read_balance(conf, r10_bio, &max_sectors);
 	if (rdev == NULL) {
@@ -2318,13 +2339,10 @@
 		       mdname(mddev), b,
 		       (unsigned long long)r10_bio->sector);
 		raid_end_bio_io(r10_bio);
-		bio_put(bio);
 		return;
 	}
 
 	do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC);
-	if (bio)
-		bio_put(bio);
 	slot = r10_bio->read_slot;
 	printk_ratelimited(
 		KERN_ERR
@@ -2360,7 +2378,6 @@
 			mbio->bi_phys_segments++;
 		spin_unlock_irq(&conf->device_lock);
 		generic_make_request(bio);
-		bio = NULL;
 
 		r10_bio = mempool_alloc(conf->r10bio_pool,
 					GFP_NOIO);
@@ -3243,7 +3260,6 @@
 			disk->rdev = rdev;
 		}
 
-		disk->rdev = rdev;
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 53e2a80..d295941 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -956,11 +956,12 @@
 	return ret;
 
 out_freeirq:
-	if (ab8500->irq_base) {
+	if (ab8500->irq_base)
 		free_irq(ab8500->irq, ab8500);
 out_removeirq:
+	if (ab8500->irq_base)
 		ab8500_irq_remove(ab8500);
-	}
+
 	return ret;
 }
 
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 0f59228..411f523 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -123,7 +123,7 @@
 		}
 
 		if (!cell->ignore_resource_conflicts) {
-			ret = acpi_check_resource_conflict(res);
+			ret = acpi_check_resource_conflict(&res[r]);
 			if (ret)
 				goto fail_res;
 		}
diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c
index e075c11..caadabe 100644
--- a/drivers/mfd/s5m-core.c
+++ b/drivers/mfd/s5m-core.c
@@ -105,7 +105,7 @@
 	s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
 	i2c_set_clientdata(s5m87xx->rtc, s5m87xx);
 
-	if (pdata->cfg_pmic_irq)
+	if (pdata && pdata->cfg_pmic_irq)
 		pdata->cfg_pmic_irq();
 
 	s5m_irq_init(s5m87xx);
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 01cf501..4392f6b 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -168,7 +168,7 @@
 		goto err;
 
 	init_data->irq = pmic_plat_data->irq;
-	init_data->irq_base = pmic_plat_data->irq;
+	init_data->irq_base = pmic_plat_data->irq_base;
 
 	tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);
 
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 5fec23a..74fd8cb 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -151,7 +151,7 @@
 		goto err;
 
 	init_data->irq = pmic_plat_data->irq;
-	init_data->irq_base = pmic_plat_data->irq;
+	init_data->irq_base = pmic_plat_data->irq_base;
 	ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
 	if (ret < 0)
 		goto err;
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index 8a1fafd..9fd01bf 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -496,7 +496,6 @@
 
 	mutex_init(&wm8350->irq_lock);
 	wm8350->chip_irq = irq;
-	wm8350->irq_base = pdata->irq_base;
 
 	if (pdata && pdata->irq_base > 0)
 		irq_base = pdata->irq_base;
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index f117e7f..a04b3c1 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -256,6 +256,20 @@
 		break;
 	}
 
+	switch (wm8994->type) {
+	case WM1811:
+		ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
+		if (ret < 0) {
+			dev_err(dev, "Failed to read jackdet: %d\n", ret);
+		} else if (ret & WM1811_JACKDET_MODE_MASK) {
+			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+			return 0;
+		}
+		break;
+	default:
+		break;
+	}
+
 	/* Disable LDO pulldowns while the device is suspended if we
 	 * don't know that something will be driving them. */
 	if (!wm8994->ldo_ena_always_driven)
diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c
index c598ae6..bc0c509 100644
--- a/drivers/mfd/wm8994-regmap.c
+++ b/drivers/mfd/wm8994-regmap.c
@@ -806,6 +806,7 @@
 	case WM8994_DC_SERVO_2:
 	case WM8994_DC_SERVO_READBACK:
 	case WM8994_DC_SERVO_4:
+	case WM8994_DC_SERVO_4E:
 	case WM8994_ANALOGUE_HP_1:
 	case WM8958_MIC_DETECT_1:
 	case WM8958_MIC_DETECT_2:
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
index 19fc7c1..f428d86 100644
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -984,9 +984,9 @@
 		" - (C) 2007 Rodolfo Giometti\n");
 
 	c2port_class = class_create(THIS_MODULE, "c2port");
-	if (!c2port_class) {
+	if (IS_ERR(c2port_class)) {
 		printk(KERN_ERR "c2port: failed to allocate class\n");
-		return -ENOMEM;
+		return PTR_ERR(c2port_class);
 	}
 	c2port_class->dev_attrs = c2port_attrs;
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 690255c..132378b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2068,6 +2068,9 @@
 	 */
 	mmc_hw_reset_for_init(host);
 
+	/* Initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	/*
 	 * sdio_reset sends CMD52 to reset card.  Since we do not know
 	 * if the card is being re-initialized, just send it.  CMD52
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 30055f2..c3704e2 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -238,10 +238,10 @@
 	/* Hold MCI clock for 8 cycles by default */
 	host->clk_delay = 8;
 	/*
-	 * Default clock gating delay is 200ms.
+	 * Default clock gating delay is 0ms to avoid wasting power.
 	 * This value can be tuned by writing into sysfs entry.
 	 */
-	host->clkgate_delay = 200;
+	host->clkgate_delay = 0;
 	host->clk_gated = false;
 	INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
 	spin_lock_init(&host->clk_lock);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a480663..2b9ed14 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -816,6 +816,9 @@
 	if (!mmc_host_is_spi(host))
 		mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
 
+	/* Initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	/*
 	 * Since we're changing the OCR value, we seem to
 	 * need to tell some cards to go back to the idle
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 5017f93..c272c686 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -911,6 +911,9 @@
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+	/* The initialization should be done at 3.3 V I/O voltage. */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	err = mmc_sd_get_cid(host, ocr, cid, &rocr);
 	if (err)
 		return err;
@@ -1156,11 +1159,6 @@
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	/* Make sure we are at 3.3V signalling voltage */
-	err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
-	if (err)
-		return err;
-
 	/* Disable preset value enable if already set since last time */
 	if (host->ops->enable_preset_value) {
 		mmc_host_clk_hold(host);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 12cde6e..2c7c83f 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -585,6 +585,9 @@
 	 * Inform the card of the voltage
 	 */
 	if (!powered_resume) {
+		/* The initialization should be done at 3.3 V I/O voltage. */
+		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 		err = mmc_send_io_op_cond(host, host->ocr, &ocr);
 		if (err)
 			goto err;
@@ -996,6 +999,11 @@
 	 * With these steps taken, mmc_select_voltage() is also required to
 	 * restore the correct voltage setting of the card.
 	 */
+
+	/* The initialization should be done at 3.3 V I/O voltage. */
+	if (!mmc_card_keep_power(host))
+		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
 	sdio_reset(host);
 	mmc_go_idle(host);
 	mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 947faa5..efdb81d 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -86,7 +86,6 @@
 {
 	return (   cpu_is_at91sam9260()
 		|| cpu_is_at91sam9263()
-		|| cpu_is_at91cap9()
 		|| cpu_is_at91sam9rl()
 		|| cpu_is_at91sam9g10()
 		|| cpu_is_at91sam9g20()
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 6985cdb..e4449a5 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1948,12 +1948,12 @@
 	}
 }
 
-static void atmci_configure_dma(struct atmel_mci *host)
+static bool atmci_configure_dma(struct atmel_mci *host)
 {
 	struct mci_platform_data	*pdata;
 
 	if (host == NULL)
-		return;
+		return false;
 
 	pdata = host->pdev->dev.platform_data;
 
@@ -1970,12 +1970,15 @@
 		host->dma.chan =
 			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
 	}
-	if (!host->dma.chan)
-		dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
-	else
+	if (!host->dma.chan) {
+		dev_warn(&host->pdev->dev, "no DMA channel available\n");
+		return false;
+	} else {
 		dev_info(&host->pdev->dev,
 					"Using %s for DMA transfers\n",
 					dma_chan_name(host->dma.chan));
+		return true;
+	}
 }
 
 static inline unsigned int atmci_get_version(struct atmel_mci *host)
@@ -2085,8 +2088,7 @@
 
 	/* Get MCI capabilities and set operations according to it */
 	atmci_get_cap(host);
-	if (host->caps.has_dma) {
-		dev_info(&pdev->dev, "using DMA\n");
+	if (host->caps.has_dma && atmci_configure_dma(host)) {
 		host->prepare_data = &atmci_prepare_data_dma;
 		host->submit_data = &atmci_submit_data_dma;
 		host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2096,15 +2098,12 @@
 		host->submit_data = &atmci_submit_data_pdc;
 		host->stop_transfer = &atmci_stop_transfer_pdc;
 	} else {
-		dev_info(&pdev->dev, "no DMA, no PDC\n");
+		dev_info(&pdev->dev, "using PIO\n");
 		host->prepare_data = &atmci_prepare_data;
 		host->submit_data = &atmci_submit_data;
 		host->stop_transfer = &atmci_stop_transfer;
 	}
 
-	if (host->caps.has_dma)
-		atmci_configure_dma(host);
-
 	platform_set_drvdata(pdev, host);
 
 	/* We need at least one slot to succeed */
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 304f2f9..bdfd055 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1271,12 +1271,13 @@
 	/*
 	 * Block size can be up to 2048 bytes, but must be a power of two.
 	 */
-	mmc->max_blk_size = 2048;
+	mmc->max_blk_size = 1 << 11;
 
 	/*
-	 * No limit on the number of blocks transferred.
+	 * Limit the number of blocks transferred so that we don't overflow
+	 * the maximum request size.
 	 */
-	mmc->max_blk_count = mmc->max_req_size;
+	mmc->max_blk_count = mmc->max_req_size >> 11;
 
 	spin_lock_init(&host->lock);
 
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index d601e41..0be4e20 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -269,8 +269,9 @@
 		imx_data->scratchpad = val;
 		return;
 	case SDHCI_COMMAND:
-		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
-			&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+		     host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+	            (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
 			val |= SDHCI_CMD_ABORTCMD;
 
 		if (is_imx6q_usdhc(imx_data)) {
diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
index 0a4fc62..c998e1a 100644
--- a/drivers/net/caif/caif_hsi.c
+++ b/drivers/net/caif/caif_hsi.c
@@ -978,7 +978,7 @@
 	dev->netdev_ops = &cfhsi_ops;
 	dev->type = ARPHRD_CAIF;
 	dev->flags = IFF_POINTOPOINT | IFF_NOARP;
-	dev->mtu = CFHSI_MAX_PAYLOAD_SZ;
+	dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ;
 	dev->tx_queue_len = 0;
 	dev->destructor = free_netdev;
 	skb_queue_head_init(&cfhsi->qhead);
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 1ff3c6d..47a9bb2 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1710,7 +1710,7 @@
 					"atl1c hardware error (status = 0x%x)\n",
 					status & ISR_ERROR);
 			/* reset MAC */
-			adapter->work_event |= ATL1C_WORK_EVENT_RESET;
+			set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
 			schedule_work(&adapter->common_task);
 			return IRQ_HANDLED;
 		}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index a1f2e0f..35c2a20 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -5352,7 +5352,7 @@
 		}
 	}
 
-	netdev_completed_queue(tp->dev, pkts_compl, bytes_compl);
+	netdev_tx_completed_queue(txq, pkts_compl, bytes_compl);
 
 	tnapi->tx_cons = sw_idx;
 
@@ -6793,7 +6793,7 @@
 	}
 
 	skb_tx_timestamp(skb);
-	netdev_sent_queue(tp->dev, skb->len);
+	netdev_tx_sent_queue(txq, skb->len);
 
 	/* Packets are ready, update Tx producer idx local and on card. */
 	tw32_tx_mbox(tnapi->prodmbox, entry);
@@ -7275,8 +7275,8 @@
 
 			dev_kfree_skb_any(skb);
 		}
+		netdev_tx_reset_queue(netdev_get_tx_queue(tp->dev, j));
 	}
-	netdev_reset_queue(tp->dev);
 }
 
 /* Initialize tx/rx rings for packet processing.
@@ -7886,10 +7886,8 @@
 	return 0;
 }
 
-static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *,
-						 struct rtnl_link_stats64 *);
-static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *,
-						struct tg3_ethtool_stats *);
+static void tg3_get_nstats(struct tg3 *, struct rtnl_link_stats64 *);
+static void tg3_get_estats(struct tg3 *, struct tg3_ethtool_stats *);
 
 /* tp->lock is held. */
 static int tg3_halt(struct tg3 *tp, int kind, int silent)
@@ -7910,7 +7908,7 @@
 
 	if (tp->hw_stats) {
 		/* Save the stats across chip resets... */
-		tg3_get_stats64(tp->dev, &tp->net_stats_prev),
+		tg3_get_nstats(tp, &tp->net_stats_prev),
 		tg3_get_estats(tp, &tp->estats_prev);
 
 		/* And make sure the next sample is new data */
@@ -9847,7 +9845,7 @@
        return ((u64)val->high << 32) | ((u64)val->low);
 }
 
-static u64 calc_crc_errors(struct tg3 *tp)
+static u64 tg3_calc_crc_errors(struct tg3 *tp)
 {
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
 
@@ -9856,14 +9854,12 @@
 	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
 		u32 val;
 
-		spin_lock_bh(&tp->lock);
 		if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) {
 			tg3_writephy(tp, MII_TG3_TEST1,
 				     val | MII_TG3_TEST1_CRC_EN);
 			tg3_readphy(tp, MII_TG3_RXR_COUNTERS, &val);
 		} else
 			val = 0;
-		spin_unlock_bh(&tp->lock);
 
 		tp->phy_crc_errors += val;
 
@@ -9877,14 +9873,13 @@
 	estats->member =	old_estats->member + \
 				get_stat64(&hw_stats->member)
 
-static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp,
-					       struct tg3_ethtool_stats *estats)
+static void tg3_get_estats(struct tg3 *tp, struct tg3_ethtool_stats *estats)
 {
 	struct tg3_ethtool_stats *old_estats = &tp->estats_prev;
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
 
 	if (!hw_stats)
-		return old_estats;
+		return;
 
 	ESTAT_ADD(rx_octets);
 	ESTAT_ADD(rx_fragments);
@@ -9963,20 +9958,13 @@
 	ESTAT_ADD(nic_tx_threshold_hit);
 
 	ESTAT_ADD(mbuf_lwm_thresh_hit);
-
-	return estats;
 }
 
-static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
-						 struct rtnl_link_stats64 *stats)
+static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats)
 {
-	struct tg3 *tp = netdev_priv(dev);
 	struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev;
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
 
-	if (!hw_stats)
-		return old_stats;
-
 	stats->rx_packets = old_stats->rx_packets +
 		get_stat64(&hw_stats->rx_ucast_packets) +
 		get_stat64(&hw_stats->rx_mcast_packets) +
@@ -10019,15 +10007,13 @@
 		get_stat64(&hw_stats->tx_carrier_sense_errors);
 
 	stats->rx_crc_errors = old_stats->rx_crc_errors +
-		calc_crc_errors(tp);
+		tg3_calc_crc_errors(tp);
 
 	stats->rx_missed_errors = old_stats->rx_missed_errors +
 		get_stat64(&hw_stats->rx_discards);
 
 	stats->rx_dropped = tp->rx_dropped;
 	stats->tx_dropped = tp->tx_dropped;
-
-	return stats;
 }
 
 static inline u32 calc_crc(unsigned char *buf, int len)
@@ -15409,6 +15395,21 @@
 	}
 }
 
+static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
+						struct rtnl_link_stats64 *stats)
+{
+	struct tg3 *tp = netdev_priv(dev);
+
+	if (!tp->hw_stats)
+		return &tp->net_stats_prev;
+
+	spin_lock_bh(&tp->lock);
+	tg3_get_nstats(tp, stats);
+	spin_unlock_bh(&tp->lock);
+
+	return stats;
+}
+
 static const struct net_device_ops tg3_netdev_ops = {
 	.ndo_open		= tg3_open,
 	.ndo_stop		= tg3_close,
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index e83d12c..9d76e59 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -196,6 +196,8 @@
 	CH_DEVICE(0x4408, 4),
 	CH_DEVICE(0x4409, 4),
 	CH_DEVICE(0x440a, 4),
+	CH_DEVICE(0x440d, 4),
+	CH_DEVICE(0x440e, 4),
 	{ 0, }
 };
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index e53365a..d963c1d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2892,6 +2892,8 @@
 	CH_DEVICE(0x4808, 0),	/* T420-cx */
 	CH_DEVICE(0x4809, 0),	/* T420-bt */
 	CH_DEVICE(0x480a, 0),   /* T404-bt */
+	CH_DEVICE(0x480d, 0),   /* T480-cr */
+	CH_DEVICE(0x480e, 0),   /* T440-lp-cr */
 	{ 0, }
 };
 
diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index ee93a20..c52295c 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -94,7 +94,7 @@
 	u32 rx_coalesce_usecs;
 	u32 tx_coalesce_usecs;
 #ifdef CONFIG_PCI_IOV
-	u32 num_vfs;
+	u16 num_vfs;
 #endif
 	struct enic_port_profile *pp;
 
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index ab3f67f..0e4edd3 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2370,7 +2370,7 @@
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
 	if (pos) {
 		pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF,
-			(u16 *)&enic->num_vfs);
+			&enic->num_vfs);
 		if (enic->num_vfs) {
 			err = pci_enable_sriov(pdev, enic->num_vfs);
 			if (err) {
diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 5d5fb26..e6893cd 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -336,7 +336,9 @@
 	stats->tx_bytes = tx_bytes;
 	stats->rx_packets = rx_packets;
 
-	return &port->stats;
+	stats->multicast = port->stats.multicast;
+	stats->rx_errors = port->stats.rx_errors;
+	return stats;
 }
 
 static void ehea_update_stats(struct work_struct *work)
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index 738f950..fb2b367 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -151,11 +151,6 @@
 		context->log_page_size   = mtt->page_shift - MLX4_ICM_PAGE_SHIFT;
 	}
 
-	port = ((context->pri_path.sched_queue >> 6) & 1) + 1;
-	if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
-		context->pri_path.sched_queue = (context->pri_path.sched_queue &
-						0xc3);
-
 	*(__be32 *) mailbox->buf = cpu_to_be32(optpar);
 	memcpy(mailbox->buf + 8, context, sizeof *context);
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index bfdb7af..8752e6e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -2255,8 +2255,7 @@
 
 	if (vhcr->op_modifier == 0) {
 		err = handle_resize(dev, slave, vhcr, inbox, outbox, cmd, cq);
-		if (err)
-			goto ex_put;
+		goto ex_put;
 	}
 
 	err = mlx4_DMA_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
index 9cb5f91..29e23be 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
@@ -321,10 +321,10 @@
 			pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
 			hw->phy.autoneg_advertised = opt.def;
 		} else {
-			hw->phy.autoneg_advertised = AutoNeg;
-			pch_gbe_validate_option(
-				(int *)(&hw->phy.autoneg_advertised),
-				&opt, adapter);
+			int tmp = AutoNeg;
+
+			pch_gbe_validate_option(&tmp, &opt, adapter);
+			hw->phy.autoneg_advertised = tmp;
 		}
 	}
 
@@ -495,9 +495,10 @@
 			.arg  = { .l = { .nr = (int)ARRAY_SIZE(fc_list),
 					 .p = fc_list } }
 		};
-		hw->mac.fc = FlowControl;
-		pch_gbe_validate_option((int *)(&hw->mac.fc),
-						&opt, adapter);
+		int tmp = FlowControl;
+
+		pch_gbe_validate_option(&tmp, &opt, adapter);
+		hw->mac.fc = tmp;
 	}
 
 	pch_gbe_check_copper_options(adapter);
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index b97132d..8f29feb 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -4,6 +4,7 @@
 
 config NET_PACKET_ENGINE
 	bool "Packet Engine devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 7931531..e61560e 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -3017,7 +3017,6 @@
 		(void __iomem *)port_regs;
 	u32 delay = 10;
 	int status = 0;
-	unsigned long hw_flags = 0;
 
 	if (ql_mii_setup(qdev))
 		return -1;
@@ -3228,9 +3227,9 @@
 		value = ql_read_page0_reg(qdev, &port_regs->portStatus);
 		if (value & PORT_STATUS_IC)
 			break;
-		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+		spin_unlock_irq(&qdev->hw_lock);
 		msleep(500);
-		spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+		spin_lock_irq(&qdev->hw_lock);
 	} while (--delay);
 
 	if (delay == 0) {
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7a0c800..bbacb37 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3781,12 +3781,20 @@
 
 static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.enable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	rtl_generic_op(tp, tp->jumbo_ops.disable);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
 }
 
 static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp)
@@ -6186,6 +6194,9 @@
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
+	struct device *d = &pdev->dev;
+
+	pm_runtime_get_sync(d);
 
 	rtl8169_net_suspend(dev);
 
@@ -6207,6 +6218,8 @@
 		pci_wake_from_d3(pdev, true);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
+
+	pm_runtime_put_noidle(d);
 }
 
 static struct pci_driver rtl8169_pci_driver = {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 466c58a..bf01841 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -313,7 +313,7 @@
 static void netvsc_get_drvinfo(struct net_device *net,
 			       struct ethtool_drvinfo *info)
 {
-	strcpy(info->driver, "hv_netvsc");
+	strcpy(info->driver, KBUILD_MODNAME);
 	strcpy(info->version, HV_DRV_VERSION);
 	strcpy(info->fw_version, "N/A");
 }
@@ -485,7 +485,7 @@
 
 /* The one and only one */
 static struct  hv_driver netvsc_drv = {
-	.name = "netvsc",
+	.name = KBUILD_MODNAME,
 	.id_table = id_table,
 	.probe = netvsc_probe,
 	.remove = netvsc_remove,
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index fae0fbd..81b96e3 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -589,6 +589,7 @@
 		entry = (struct skb_data *) skb->cb;
 		urb = entry->urb;
 
+		spin_unlock_irqrestore(&q->lock, flags);
 		// during some PM-driven resume scenarios,
 		// these (async) unlinks complete immediately
 		retval = usb_unlink_urb (urb);
@@ -596,6 +597,7 @@
 			netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
 		else
 			count++;
+		spin_lock_irqsave(&q->lock, flags);
 	}
 	spin_unlock_irqrestore (&q->lock, flags);
 	return count;
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3dcd385..756c0f5 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -830,13 +830,8 @@
 					ctx->l4_hdr_size = ((struct tcphdr *)
 					   skb_transport_header(skb))->doff * 4;
 				else if (iph->protocol == IPPROTO_UDP)
-					/*
-					 * Use tcp header size so that bytes to
-					 * be copied are more than required by
-					 * the device.
-					 */
 					ctx->l4_hdr_size =
-							sizeof(struct tcphdr);
+							sizeof(struct udphdr);
 				else
 					ctx->l4_hdr_size = 0;
 			} else {
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index ed54797..fc46a81 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -70,10 +70,10 @@
 /*
  * Version numbers
  */
-#define VMXNET3_DRIVER_VERSION_STRING   "1.1.18.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING   "1.1.29.0-k"
 
 /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM      0x01011200
+#define VMXNET3_DRIVER_VERSION_NUM      0x01011D00
 
 #if defined(CONFIG_PCI_MSI)
 	/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index f901a17..86a891f 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -489,8 +489,6 @@
 	ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
 	ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
 	ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
-	ATH_ALLOC_BANK(ah->addac5416_21,
-		       ah->iniAddac.ia_rows * ah->iniAddac.ia_columns);
 	ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
 
 	return 0;
@@ -519,7 +517,6 @@
 	ATH_FREE_BANK(ah->analogBank6Data);
 	ATH_FREE_BANK(ah->analogBank6TPCData);
 	ATH_FREE_BANK(ah->analogBank7Data);
-	ATH_FREE_BANK(ah->addac5416_21);
 	ATH_FREE_BANK(ah->bank6Temp);
 
 #undef ATH_FREE_BANK
@@ -805,27 +802,7 @@
 	if (ah->eep_ops->set_addac)
 		ah->eep_ops->set_addac(ah, chan);
 
-	if (AR_SREV_5416_22_OR_LATER(ah)) {
-		REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
-	} else {
-		struct ar5416IniArray temp;
-		u32 addacSize =
-			sizeof(u32) * ah->iniAddac.ia_rows *
-			ah->iniAddac.ia_columns;
-
-		/* For AR5416 2.0/2.1 */
-		memcpy(ah->addac5416_21,
-		       ah->iniAddac.ia_array, addacSize);
-
-		/* override CLKDRV value at [row, column] = [31, 1] */
-		(ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0;
-
-		temp.ia_array = ah->addac5416_21;
-		temp.ia_columns = ah->iniAddac.ia_columns;
-		temp.ia_rows = ah->iniAddac.ia_rows;
-		REG_WRITE_ARRAY(&temp, 1, regWrites);
-	}
-
+	REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
 	REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
 
 	ENABLE_REGWRITE_BUFFER(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index 11f192a..d190411 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -180,6 +180,25 @@
 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac,
 			       ARRAY_SIZE(ar5416Addac), 2);
 	}
+
+	/* iniAddac needs to be modified for these chips */
+	if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
+		struct ar5416IniArray *addac = &ah->iniAddac;
+		u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
+		u32 *data;
+
+		data = kmalloc(size, GFP_KERNEL);
+		if (!data)
+			return;
+
+		memcpy(data, addac->ia_array, size);
+		addac->ia_array = data;
+
+		if (!AR_SREV_5416_22_OR_LATER(ah)) {
+			/* override CLKDRV value */
+			INI_RA(addac, 31,1) = 0;
+		}
+	}
 }
 
 /* Support for Japan ch.14 (2484) spread */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 6a29004..c8261d4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -940,7 +940,6 @@
 	u32 *analogBank6Data;
 	u32 *analogBank6TPCData;
 	u32 *analogBank7Data;
-	u32 *addac5416_21;
 	u32 *bank6Temp;
 
 	u8 txpower_limit;
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index d19a9ee..bbc813d 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -1234,6 +1234,7 @@
 {
 	struct ieee80211_sta *sta;
 	struct carl9170_sta_info *sta_info;
+	struct ieee80211_tx_info *tx_info;
 
 	rcu_read_lock();
 	sta = __carl9170_get_tx_sta(ar, skb);
@@ -1241,16 +1242,18 @@
 		goto out_rcu;
 
 	sta_info = (void *) sta->drv_priv;
-	if (unlikely(sta_info->sleeping)) {
-		struct ieee80211_tx_info *tx_info;
+	tx_info = IEEE80211_SKB_CB(skb);
 
+	if (unlikely(sta_info->sleeping) &&
+	    !(tx_info->flags & (IEEE80211_TX_CTL_POLL_RESPONSE |
+				IEEE80211_TX_CTL_CLEAR_PS_FILT))) {
 		rcu_read_unlock();
 
-		tx_info = IEEE80211_SKB_CB(skb);
 		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
 			atomic_dec(&ar->tx_ampdu_upload);
 
 		tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+		carl9170_release_dev_space(ar, skb);
 		carl9170_tx_status(ar, skb, false);
 		return true;
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
index 90911ee..30b5887 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
@@ -1051,17 +1051,13 @@
 		}
 		/* either retransmit or send bar if ack not recd */
 		if (!ack_recd) {
-			struct ieee80211_tx_rate *txrate =
-			    tx_info->status.rates;
-			if (retry && (txrate[0].count < (int)retry_limit)) {
+			if (retry && (ini->txretry[index] < (int)retry_limit)) {
 				ini->txretry[index]++;
 				ini->tx_in_transit--;
 				/*
 				 * Use high prededence for retransmit to
 				 * give some punch
 				 */
-				/* brcms_c_txq_enq(wlc, scb, p,
-				 * BRCMS_PRIO_TO_PREC(tid)); */
 				brcms_c_txq_enq(wlc, scb, p,
 						BRCMS_PRIO_TO_HI_PREC(tid));
 			} else {
@@ -1074,9 +1070,9 @@
 				    IEEE80211_TX_STAT_AMPDU_NO_BACK;
 				skb_pull(p, D11_PHY_HDR_LEN);
 				skb_pull(p, D11_TXH_LEN);
-				wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_"
-					"transit %d\n", "AMPDU status", seq,
-					ini->tx_in_transit);
+				BCMMSG(wiphy,
+				       "BA Timeout, seq %d, in_transit %d\n",
+				       seq, ini->tx_in_transit);
 				ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw,
 							    p);
 			}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 64cf439..ca78e91 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1240,7 +1240,7 @@
 				.flags = CMD_SYNC,
 				.data[0] = key_data.rsc_tsc,
 				.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
-				.len[0] = sizeof(key_data.rsc_tsc),
+				.len[0] = sizeof(*key_data.rsc_tsc),
 			};
 
 			ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index 7353826..e483cfa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1187,6 +1187,7 @@
 	unsigned long flags;
 	struct iwl_addsta_cmd sta_cmd;
 	u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta);
+	__le16 key_flags;
 
 	/* if station isn't there, neither is the key */
 	if (sta_id == IWL_INVALID_STATION)
@@ -1212,7 +1213,14 @@
 		IWL_ERR(priv, "offset %d not used in uCode key table.\n",
 			keyconf->hw_key_idx);
 
-	sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
+	key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC |
+		     STA_KEY_FLG_INVALID;
+
+	if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	sta_cmd.key.key_flags = key_flags;
 	sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
 	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 5b2972b..2210a0f 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -846,6 +846,7 @@
 	priv->sec_info.wpa_enabled = false;
 	priv->sec_info.wpa2_enabled = false;
 	priv->wep_key_curr_index = 0;
+	priv->sec_info.encryption_mode = 0;
 	ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
 
 	if (mode == NL80211_IFTYPE_ADHOC) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c3e1aa7..d2a1ea9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1220,7 +1220,8 @@
 		cancel_work_sync(&rt2x00dev->rxdone_work);
 		cancel_work_sync(&rt2x00dev->txdone_work);
 	}
-	destroy_workqueue(rt2x00dev->workqueue);
+	if (rt2x00dev->workqueue)
+		destroy_workqueue(rt2x00dev->workqueue);
 
 	/*
 	 * Free the tx status fifo.
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index ea2bd1b..91a375f 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -23,7 +23,6 @@
 #include <asm/machdep.h>
 #endif /* CONFIG_PPC */
 
-#include <asm/setup.h>
 #include <asm/page.h>
 
 char *of_fdt_get_string(struct boot_param_header *blob, u32 offset)
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 980c079..483c0ad 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -182,7 +182,7 @@
 	if (!phy_id || sz < sizeof(*phy_id))
 		return NULL;
 
-	sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0]));
+	sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0]));
 
 	phy = phy_connect(dev, bus_id, hndlr, 0, iface);
 	return IS_ERR(phy) ? NULL : phy;
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
index 2baadd2..98fbe62 100644
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -369,9 +369,9 @@
 	int err;
 
 	pps_class = class_create(THIS_MODULE, "pps");
-	if (!pps_class) {
+	if (IS_ERR(pps_class)) {
 		pr_err("failed to allocate class\n");
-		return -ENOMEM;
+		return PTR_ERR(pps_class);
 	}
 	pps_class->dev_attrs = pps_attrs;
 
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 691b1ab..30d2072 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -410,13 +410,14 @@
 	 */
 	mport = priv->mport;
 
-	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE));
-	rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
 
 	while (wr_ptr != rd_ptr) {
 		idb_entry = (u64 *)(priv->idb_base +
 					(TSI721_IDB_ENTRY_SIZE * rd_ptr));
 		rd_ptr++;
+		rd_ptr %= IDB_QSIZE;
 		idb.msg = *idb_entry;
 		*idb_entry = 0;
 
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 3767364..ea4d8f5 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -260,8 +260,8 @@
 	 * the LDO activate bit to implment the changes on the
 	 * LDO output.
 	*/
-	return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0,
-				 info->activate_bit);
+	return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
+				 info->activate_bit, info->activate_bit);
 }
 
 static int da9052_set_dcdc_voltage(struct regulator_dev *rdev,
@@ -280,8 +280,8 @@
 	 * the DCDC activate bit to implment the changes on the
 	 * DCDC output.
 	*/
-	return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0,
-				 info->activate_bit);
+	return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
+				 info->activate_bit, info->activate_bit);
 }
 
 static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 5c15ba0..40ecf516 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -662,7 +662,7 @@
 		tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel);
 		break;
 	case TPS65911_REG_VDDCTRL:
-		vsel = selector;
+		vsel = selector + 3;
 		tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel);
 	}
 
diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c
index 9beba49c..2853c2a 100644
--- a/drivers/rtc/rtc-r9701.c
+++ b/drivers/rtc/rtc-r9701.c
@@ -125,6 +125,13 @@
 	unsigned char tmp;
 	int res;
 
+	tmp = R100CNT;
+	res = read_regs(&spi->dev, &tmp, 1);
+	if (res || tmp != 0x20) {
+		dev_err(&spi->dev, "cannot read RTC register\n");
+		return -ENODEV;
+	}
+
 	rtc = rtc_device_register("r9701",
 				&spi->dev, &r9701_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc))
@@ -132,13 +139,6 @@
 
 	dev_set_drvdata(&spi->dev, rtc);
 
-	tmp = R100CNT;
-	res = read_regs(&spi->dev, &tmp, 1);
-	if (res || tmp != 0x20) {
-		rtc_device_unregister(rtc);
-		return res;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 3ef8d07..770a740 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -167,7 +167,7 @@
 	DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
 	DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
 	q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
-		   0, -1, -1, q->irq_ptr->int_parm);
+		   q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
 	return 0;
 }
 
@@ -215,7 +215,7 @@
 	DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
 	DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
 	q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
-		   0, -1, -1, q->irq_ptr->int_parm);
+		   q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
 	return 0;
 }
 
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 0cb39ff..f8fb2d6 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -408,7 +408,7 @@
 			kunmap_atomic(sdt, KM_USER0);
 		}
 
-		bio->bi_flags |= BIO_MAPPED_INTEGRITY;
+		bio->bi_flags |= (1 << BIO_MAPPED_INTEGRITY);
 	}
 
 	return 0;
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 92d314a..91b6d52 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -26,7 +26,7 @@
 		  clk->mapped_reg);
 }
 
-static struct clk_ops sh_clk_mstp32_clk_ops = {
+static struct sh_clk_ops sh_clk_mstp32_clk_ops = {
 	.enable		= sh_clk_mstp32_enable,
 	.disable	= sh_clk_mstp32_disable,
 	.recalc		= followparent_recalc,
@@ -150,7 +150,7 @@
 	iowrite32(value, clk->mapped_reg);
 }
 
-static struct clk_ops sh_clk_div6_clk_ops = {
+static struct sh_clk_ops sh_clk_div6_clk_ops = {
 	.recalc		= sh_clk_div6_recalc,
 	.round_rate	= sh_clk_div_round_rate,
 	.set_rate	= sh_clk_div6_set_rate,
@@ -158,7 +158,7 @@
 	.disable	= sh_clk_div6_disable,
 };
 
-static struct clk_ops sh_clk_div6_reparent_clk_ops = {
+static struct sh_clk_ops sh_clk_div6_reparent_clk_ops = {
 	.recalc		= sh_clk_div6_recalc,
 	.round_rate	= sh_clk_div_round_rate,
 	.set_rate	= sh_clk_div6_set_rate,
@@ -200,7 +200,7 @@
 }
 
 static int __init sh_clk_div6_register_ops(struct clk *clks, int nr,
-					   struct clk_ops *ops)
+					   struct sh_clk_ops *ops)
 {
 	struct clk *clkp;
 	void *freq_table;
@@ -317,13 +317,13 @@
 	iowrite32(ioread32(clk->mapped_reg) | (1 << 8), clk->mapped_reg);
 }
 
-static struct clk_ops sh_clk_div4_clk_ops = {
+static struct sh_clk_ops sh_clk_div4_clk_ops = {
 	.recalc		= sh_clk_div4_recalc,
 	.set_rate	= sh_clk_div4_set_rate,
 	.round_rate	= sh_clk_div_round_rate,
 };
 
-static struct clk_ops sh_clk_div4_enable_clk_ops = {
+static struct sh_clk_ops sh_clk_div4_enable_clk_ops = {
 	.recalc		= sh_clk_div4_recalc,
 	.set_rate	= sh_clk_div4_set_rate,
 	.round_rate	= sh_clk_div_round_rate,
@@ -331,7 +331,7 @@
 	.disable	= sh_clk_div4_disable,
 };
 
-static struct clk_ops sh_clk_div4_reparent_clk_ops = {
+static struct sh_clk_ops sh_clk_div4_reparent_clk_ops = {
 	.recalc		= sh_clk_div4_recalc,
 	.set_rate	= sh_clk_div4_set_rate,
 	.round_rate	= sh_clk_div_round_rate,
@@ -341,7 +341,7 @@
 };
 
 static int __init sh_clk_div4_register_ops(struct clk *clks, int nr,
-			struct clk_div4_table *table, struct clk_ops *ops)
+			struct clk_div4_table *table, struct sh_clk_ops *ops)
 {
 	struct clk *clkp;
 	void *freq_table;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 2f9cb43..f37ad22 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1083,7 +1083,7 @@
 	return -ENOMEM;
 }
 
-static int __init pl022_dma_probe(struct pl022 *pl022)
+static int __devinit pl022_dma_probe(struct pl022 *pl022)
 {
 	dma_cap_mask_t mask;
 
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index b3d1741..830cd62 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -365,7 +365,7 @@
 
 config PPC_EARLY_DEBUG_EHV_BC
 	bool "Early console (udbg) support for ePAPR hypervisors"
-	depends on PPC_EPAPR_HV_BYTECHAN
+	depends on PPC_EPAPR_HV_BYTECHAN=y
 	help
 	  Select this option to enable early console (a.k.a. "udbg") support
 	  via an ePAPR byte channel.  You also need to choose the byte channel
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a..85ae4b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@
 
 config USB_AT91
 	tristate "Atmel AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
 	select USB_GADGET_DUALSPEED
-	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index c26a82e..b556a72 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -239,7 +239,7 @@
 	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 }
 
-static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 {
 	struct usb_hcd *hcd = ehci_to_hcd(ehci);
 	struct fsl_usb2_platform_data *pdata;
@@ -299,19 +299,12 @@
 #endif
 		out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 	}
-
-	if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) {
-		printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
-		return -ENODEV;
-	}
-	return 0;
 }
 
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
-	if (ehci_fsl_usb_setup(ehci))
-		return -ENODEV;
+	ehci_fsl_usb_setup(ehci);
 	ehci_port_power(ehci, 0);
 
 	return 0;
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index bdf43e2..4918062 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -45,6 +45,5 @@
 #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
-#define CTRL_PHY_CLK_VALID	(1 << 17)
 #define SNOOP_SIZE_2GB		0x1e
 #endif				/* _EHCI_FSL_H */
diff --git a/fs/aio.c b/fs/aio.c
index 969beb0..b9d64d8 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -228,12 +228,6 @@
 	call_rcu(&ctx->rcu_head, ctx_rcu_free);
 }
 
-static inline void get_ioctx(struct kioctx *kioctx)
-{
-	BUG_ON(atomic_read(&kioctx->users) <= 0);
-	atomic_inc(&kioctx->users);
-}
-
 static inline int try_get_ioctx(struct kioctx *kioctx)
 {
 	return atomic_inc_not_zero(&kioctx->users);
@@ -273,7 +267,7 @@
 	mm = ctx->mm = current->mm;
 	atomic_inc(&mm->mm_count);
 
-	atomic_set(&ctx->users, 1);
+	atomic_set(&ctx->users, 2);
 	spin_lock_init(&ctx->ctx_lock);
 	spin_lock_init(&ctx->ring_info.ring_lock);
 	init_waitqueue_head(&ctx->wait);
@@ -490,6 +484,8 @@
 		kmem_cache_free(kiocb_cachep, req);
 		ctx->reqs_active--;
 	}
+	if (unlikely(!ctx->reqs_active && ctx->dead))
+		wake_up_all(&ctx->wait);
 	spin_unlock_irq(&ctx->ctx_lock);
 }
 
@@ -607,11 +603,16 @@
 			fput(req->ki_filp);
 
 		/* Link the iocb into the context's free list */
+		rcu_read_lock();
 		spin_lock_irq(&ctx->ctx_lock);
 		really_put_req(ctx, req);
+		/*
+		 * at that point ctx might've been killed, but actual
+		 * freeing is RCU'd
+		 */
 		spin_unlock_irq(&ctx->ctx_lock);
+		rcu_read_unlock();
 
-		put_ioctx(ctx);
 		spin_lock_irq(&fput_lock);
 	}
 	spin_unlock_irq(&fput_lock);
@@ -642,7 +643,6 @@
 	 * this function will be executed w/out any aio kthread wakeup.
 	 */
 	if (unlikely(!fput_atomic(req->ki_filp))) {
-		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
 		spin_unlock(&fput_lock);
@@ -1336,10 +1336,10 @@
 	ret = PTR_ERR(ioctx);
 	if (!IS_ERR(ioctx)) {
 		ret = put_user(ioctx->user_id, ctxp);
-		if (!ret)
+		if (!ret) {
+			put_ioctx(ioctx);
 			return 0;
-
-		get_ioctx(ioctx); /* io_destroy() expects us to hold a ref */
+		}
 		io_destroy(ioctx);
 	}
 
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index a6395bd..1ff9405 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -259,6 +259,13 @@
 	current->mm->free_area_cache = current->mm->mmap_base;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
 
@@ -352,13 +359,6 @@
 		return retval;
 	}
 
-	retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) { 
-		/* Someone check-me: is this error path enough? */ 
-		send_sig(SIGKILL, current, 0); 
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long) create_aout_tables((char __user *) bprm->p, bprm);
 #ifdef __alpha__
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 98f6bf10..0436c12 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -583,7 +583,7 @@
 	struct btrfs_path *path;
 	struct btrfs_key info_key = { 0 };
 	struct btrfs_delayed_ref_root *delayed_refs = NULL;
-	struct btrfs_delayed_ref_head *head = NULL;
+	struct btrfs_delayed_ref_head *head;
 	int info_level = 0;
 	int ret;
 	struct list_head prefs_delayed;
@@ -607,6 +607,8 @@
 	 * at a specified point in time
 	 */
 again:
+	head = NULL;
+
 	ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
@@ -635,8 +637,10 @@
 			goto again;
 		}
 		ret = __add_delayed_refs(head, seq, &info_key, &prefs_delayed);
-		if (ret)
+		if (ret) {
+			spin_unlock(&delayed_refs->lock);
 			goto out;
+		}
 	}
 	spin_unlock(&delayed_refs->lock);
 
diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c
index 2373b39..22db045 100644
--- a/fs/btrfs/reada.c
+++ b/fs/btrfs/reada.c
@@ -305,7 +305,7 @@
 
 	spin_lock(&fs_info->reada_lock);
 	ret = radix_tree_insert(&dev->reada_zones,
-				(unsigned long)zone->end >> PAGE_CACHE_SHIFT,
+				(unsigned long)(zone->end >> PAGE_CACHE_SHIFT),
 				zone);
 	spin_unlock(&fs_info->reada_lock);
 
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 63a196b..bc7e244 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -584,10 +584,26 @@
 			 * If either that or op not supported returned, follow
 			 * the normal lookup.
 			 */
-			if ((rc == 0) || (rc == -ENOENT))
+			switch (rc) {
+			case 0:
+				/*
+				 * The server may allow us to open things like
+				 * FIFOs, but the client isn't set up to deal
+				 * with that. If it's not a regular file, just
+				 * close it and proceed as if it were a normal
+				 * lookup.
+				 */
+				if (newInode && !S_ISREG(newInode->i_mode)) {
+					CIFSSMBClose(xid, pTcon, fileHandle);
+					break;
+				}
+			case -ENOENT:
 				posix_open = true;
-			else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP))
+			case -EOPNOTSUPP:
+				break;
+			default:
 				pTcon->broken_posix_open = true;
+			}
 		}
 		if (!posix_open)
 			rc = cifs_get_inode_info_unix(&newInode, full_path,
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a5f54b7..745da3d 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -534,6 +534,11 @@
 	if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
 		fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
 		fattr->cf_dtype = DT_DIR;
+		/*
+		 * Server can return wrong NumberOfLinks value for directories
+		 * when Unix extensions are disabled - fake it.
+		 */
+		fattr->cf_nlink = 2;
 	} else {
 		fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
 		fattr->cf_dtype = DT_REG;
@@ -541,9 +546,9 @@
 		/* clear write bits if ATTR_READONLY is set */
 		if (fattr->cf_cifsattrs & ATTR_READONLY)
 			fattr->cf_mode &= ~(S_IWUGO);
-	}
 
-	fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+		fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+	}
 
 	fattr->cf_uid = cifs_sb->mnt_uid;
 	fattr->cf_gid = cifs_sb->mnt_gid;
@@ -1322,7 +1327,6 @@
 			}
 /*BB check (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID ) to see if need
 	to set uid/gid */
-			inc_nlink(inode);
 
 			cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
 			cifs_fill_uniqueid(inode->i_sb, &fattr);
@@ -1355,7 +1359,6 @@
 		d_drop(direntry);
 	} else {
 mkdir_get_info:
-		inc_nlink(inode);
 		if (pTcon->unix_ext)
 			rc = cifs_get_inode_info_unix(&newinode, full_path,
 						      inode->i_sb, xid);
@@ -1436,6 +1439,11 @@
 		}
 	}
 mkdir_out:
+	/*
+	 * Force revalidate to get parent dir info when needed since cached
+	 * attributes are invalid now.
+	 */
+	CIFS_I(inode)->time = 0;
 	kfree(full_path);
 	FreeXid(xid);
 	cifs_put_tlink(tlink);
@@ -1475,7 +1483,6 @@
 	cifs_put_tlink(tlink);
 
 	if (!rc) {
-		drop_nlink(inode);
 		spin_lock(&direntry->d_inode->i_lock);
 		i_size_write(direntry->d_inode, 0);
 		clear_nlink(direntry->d_inode);
@@ -1483,12 +1490,15 @@
 	}
 
 	cifsInode = CIFS_I(direntry->d_inode);
-	cifsInode->time = 0;	/* force revalidate to go get info when
-				   needed */
+	/* force revalidate to go get info when needed */
+	cifsInode->time = 0;
 
 	cifsInode = CIFS_I(inode);
-	cifsInode->time = 0;	/* force revalidate to get parent dir info
-				   since cached search results now invalid */
+	/*
+	 * Force revalidate to get parent dir info when needed since cached
+	 * attributes are invalid now.
+	 */
+	cifsInode->time = 0;
 
 	direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
 		current_fs_time(inode->i_sb);
diff --git a/fs/dcache.c b/fs/dcache.c
index 138be96..bcbdb33 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -137,6 +137,26 @@
 }
 #endif
 
+/*
+ * Compare 2 name strings, return 0 if they match, otherwise non-zero.
+ * The strings are both count bytes long, and count is non-zero.
+ */
+static inline int dentry_cmp(const unsigned char *cs, size_t scount,
+				const unsigned char *ct, size_t tcount)
+{
+	if (scount != tcount)
+		return 1;
+
+	do {
+		if (*cs != *ct)
+			return 1;
+		cs++;
+		ct++;
+		tcount--;
+	} while (tcount);
+	return 0;
+}
+
 static void __d_free(struct rcu_head *head)
 {
 	struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
diff --git a/fs/exec.c b/fs/exec.c
index 92ce83a..153dee1 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1915,7 +1915,6 @@
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	struct completion *vfork_done;
 	int core_waiters = -EBUSY;
 
 	init_completion(&core_state->startup);
@@ -1927,22 +1926,9 @@
 		core_waiters = zap_threads(tsk, mm, core_state, exit_code);
 	up_write(&mm->mmap_sem);
 
-	if (unlikely(core_waiters < 0))
-		goto fail;
-
-	/*
-	 * Make sure nobody is waiting for us to release the VM,
-	 * otherwise we can deadlock when we wait on each other
-	 */
-	vfork_done = tsk->vfork_done;
-	if (vfork_done) {
-		tsk->vfork_done = NULL;
-		complete(vfork_done);
-	}
-
-	if (core_waiters)
+	if (core_waiters > 0)
 		wait_for_completion(&core_state->startup);
-fail:
+
 	return core_waiters;
 }
 
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 514ed45..d117b29 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -23,6 +23,8 @@
 #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
 #define ASM_ARM_HARDWARE_SERIAL_AMBA_H
 
+#include <linux/types.h>
+
 /* -------------------------------------------------------------------------------
  *  From AMBA UART (PL010) Block Specification
  * -------------------------------------------------------------------------------
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 4270bed..ff5f525 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -47,26 +47,6 @@
 };
 extern struct dentry_stat_t dentry_stat;
 
-/*
- * Compare 2 name strings, return 0 if they match, otherwise non-zero.
- * The strings are both count bytes long, and count is non-zero.
- */
-static inline int dentry_cmp(const unsigned char *cs, size_t scount,
-				const unsigned char *ct, size_t tcount)
-{
-	if (scount != tcount)
-		return 1;
-
-	do {
-		if (*cs != *ct)
-			return 1;
-		cs++;
-		ct++;
-		tcount--;
-	} while (tcount);
-	return 0;
-}
-
 /* Name hashing routines. Initial hash value */
 /* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
 #define init_name_hash()		0
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
index fee6631..35f7237 100644
--- a/include/linux/kmsg_dump.h
+++ b/include/linux/kmsg_dump.h
@@ -15,13 +15,18 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 
+/*
+ * Keep this list arranged in rough order of priority. Anything listed after
+ * KMSG_DUMP_OOPS will not be logged by default unless printk.always_kmsg_dump
+ * is passed to the kernel.
+ */
 enum kmsg_dump_reason {
-	KMSG_DUMP_OOPS,
 	KMSG_DUMP_PANIC,
+	KMSG_DUMP_OOPS,
+	KMSG_DUMP_EMERG,
 	KMSG_DUMP_RESTART,
 	KMSG_DUMP_HALT,
 	KMSG_DUMP_POWEROFF,
-	KMSG_DUMP_EMERG,
 };
 
 /**
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 4d34356..b80de52 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -129,7 +129,6 @@
 extern void mem_cgroup_replace_page_cache(struct page *oldpage,
 					struct page *newpage);
 
-extern void mem_cgroup_reset_owner(struct page *page);
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 extern int do_swap_account;
 #endif
@@ -392,10 +391,6 @@
 				struct page *newpage)
 {
 }
-
-static inline void mem_cgroup_reset_owner(struct page *page)
-{
-}
 #endif /* CONFIG_CGROUP_MEM_CONT */
 
 #if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM)
diff --git a/include/linux/of.h b/include/linux/of.h
index a75a831..92cf6ad 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -281,6 +281,14 @@
 	return NULL;
 }
 
+static inline struct device_node *of_find_compatible_node(
+						struct device_node *from,
+						const char *type,
+						const char *compat)
+{
+	return NULL;
+}
+
 static inline int of_property_read_u32_array(const struct device_node *np,
 					     const char *propname,
 					     u32 *out_values, size_t sz)
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 32cd1f6..21638ae 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -348,9 +348,9 @@
 #define _this_cpu_generic_to_op(pcp, val, op)				\
 do {									\
 	unsigned long flags;						\
-	local_irq_save(flags);						\
+	raw_local_irq_save(flags);					\
 	*__this_cpu_ptr(&(pcp)) op val;					\
-	local_irq_restore(flags);					\
+	raw_local_irq_restore(flags);					\
 } while (0)
 
 #ifndef this_cpu_write
@@ -449,10 +449,10 @@
 ({									\
 	typeof(pcp) ret__;						\
 	unsigned long flags;						\
-	local_irq_save(flags);						\
+	raw_local_irq_save(flags);					\
 	__this_cpu_add(pcp, val);					\
 	ret__ = __this_cpu_read(pcp);					\
-	local_irq_restore(flags);					\
+	raw_local_irq_restore(flags);					\
 	ret__;								\
 })
 
@@ -479,10 +479,10 @@
 #define _this_cpu_generic_xchg(pcp, nval)				\
 ({	typeof(pcp) ret__;						\
 	unsigned long flags;						\
-	local_irq_save(flags);						\
+	raw_local_irq_save(flags);					\
 	ret__ = __this_cpu_read(pcp);					\
 	__this_cpu_write(pcp, nval);					\
-	local_irq_restore(flags);					\
+	raw_local_irq_restore(flags);					\
 	ret__;								\
 })
 
@@ -507,11 +507,11 @@
 ({									\
 	typeof(pcp) ret__;						\
 	unsigned long flags;						\
-	local_irq_save(flags);						\
+	raw_local_irq_save(flags);					\
 	ret__ = __this_cpu_read(pcp);					\
 	if (ret__ == (oval))						\
 		__this_cpu_write(pcp, nval);				\
-	local_irq_restore(flags);					\
+	raw_local_irq_restore(flags);					\
 	ret__;								\
 })
 
@@ -544,10 +544,10 @@
 ({									\
 	int ret__;							\
 	unsigned long flags;						\
-	local_irq_save(flags);						\
+	raw_local_irq_save(flags);					\
 	ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2,		\
 			oval1, oval2, nval1, nval2);			\
-	local_irq_restore(flags);					\
+	raw_local_irq_restore(flags);					\
 	ret__;								\
 })
 
@@ -718,12 +718,13 @@
 # ifndef __this_cpu_add_return_8
 #  define __this_cpu_add_return_8(pcp, val)	__this_cpu_generic_add_return(pcp, val)
 # endif
-# define __this_cpu_add_return(pcp, val)	__pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
+# define __this_cpu_add_return(pcp, val)	\
+	__pcpu_size_call_return2(__this_cpu_add_return_, pcp, val)
 #endif
 
-#define __this_cpu_sub_return(pcp, val)	this_cpu_add_return(pcp, -(val))
-#define __this_cpu_inc_return(pcp)	this_cpu_add_return(pcp, 1)
-#define __this_cpu_dec_return(pcp)	this_cpu_add_return(pcp, -1)
+#define __this_cpu_sub_return(pcp, val)	__this_cpu_add_return(pcp, -(val))
+#define __this_cpu_inc_return(pcp)	__this_cpu_add_return(pcp, 1)
+#define __this_cpu_dec_return(pcp)	__this_cpu_add_return(pcp, -1)
 
 #define __this_cpu_generic_xchg(pcp, nval)				\
 ({	typeof(pcp) ret__;						\
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 7d379a6..0657368 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1777,7 +1777,6 @@
 /*
  * Per process flags
  */
-#define PF_STARTING	0x00000002	/* being created */
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
@@ -2371,7 +2370,7 @@
  * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
  * subscriptions and synchronises with wait4().  Also used in procfs.  Also
  * pins the final release of task.io_context.  Also protects ->cpuset and
- * ->cgroup.subsys[].
+ * ->cgroup.subsys[]. And ->vfork_done.
  *
  * Nests both inside and outside of read_lock(&tasklist_lock).
  * It must not be nested with write_lock_irq(&tasklist_lock),
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 54341d8..0a9d8f2 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -18,7 +18,8 @@
 	struct kref		ref;
 };
 
-struct clk_ops {
+
+struct sh_clk_ops {
 #ifdef CONFIG_SH_CLK_CPG_LEGACY
 	void (*init)(struct clk *clk);
 #endif
@@ -37,7 +38,7 @@
 	unsigned short		parent_num;	/* choose between */
 	unsigned char		src_shift;	/* source clock field in the */
 	unsigned char		src_width;	/* configuration register */
-	struct clk_ops		*ops;
+	struct sh_clk_ops	*ops;
 
 	struct list_head	children;
 	struct list_head	sibling;	/* node for children */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 46a85c9..3c7ffdb 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -412,7 +412,8 @@
 
 	struct tcp_sack_block recv_sack_cache[4];
 
-	struct sk_buff *highest_sack;   /* highest skb with SACK received
+	struct sk_buff *highest_sack;   /* skb just after the highest
+					 * skb with SACKed bit set
 					 * (validity guaranteed only if
 					 * sacked_out > 0)
 					 */
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index 06b795d..b94765e 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -35,12 +35,12 @@
 
 	u32			metrics[RTAX_MAX];
 	u32			rate_tokens;	/* rate limiting for ICMP */
-	int			redirect_genid;
 	unsigned long		rate_last;
 	unsigned long		pmtu_expires;
 	u32			pmtu_orig;
 	u32			pmtu_learned;
 	struct inetpeer_addr_base redirect_learned;
+	struct list_head	gc_list;
 	/*
 	 * Once inet_peer is queued for deletion (refcnt == -1), following fields
 	 * are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
@@ -96,6 +96,8 @@
 extern void inet_putpeer(struct inet_peer *p);
 extern bool inet_peer_xrlim_allow(struct inet_peer *peer, int timeout);
 
+extern void inetpeer_invalidate_tree(int family);
+
 /*
  * temporary check to make sure we dont access rid, ip_id_count, tcp_ts,
  * tcp_ts_stamp if no refcount is taken on inet_peer
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 42c29bf..2d80c29 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1364,8 +1364,9 @@
 	}
 }
 
-/* Start sequence of the highest skb with SACKed bit, valid only if
- * sacked > 0 or when the caller has ensured validity by itself.
+/* Start sequence of the skb just after the highest skb with SACKed
+ * bit, valid only if sacked_out > 0 or when the caller has ensured
+ * validity by itself.
  */
 static inline u32 tcp_highest_sack_seq(struct tcp_sock *tp)
 {
diff --git a/kernel/fork.c b/kernel/fork.c
index e2cd3e2..26a7a67 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -668,6 +668,38 @@
 	return mm;
 }
 
+static void complete_vfork_done(struct task_struct *tsk)
+{
+	struct completion *vfork;
+
+	task_lock(tsk);
+	vfork = tsk->vfork_done;
+	if (likely(vfork)) {
+		tsk->vfork_done = NULL;
+		complete(vfork);
+	}
+	task_unlock(tsk);
+}
+
+static int wait_for_vfork_done(struct task_struct *child,
+				struct completion *vfork)
+{
+	int killed;
+
+	freezer_do_not_count();
+	killed = wait_for_completion_killable(vfork);
+	freezer_count();
+
+	if (killed) {
+		task_lock(child);
+		child->vfork_done = NULL;
+		task_unlock(child);
+	}
+
+	put_task_struct(child);
+	return killed;
+}
+
 /* Please note the differences between mmput and mm_release.
  * mmput is called whenever we stop holding onto a mm_struct,
  * error success whatever.
@@ -683,8 +715,6 @@
  */
 void mm_release(struct task_struct *tsk, struct mm_struct *mm)
 {
-	struct completion *vfork_done = tsk->vfork_done;
-
 	/* Get rid of any futexes when releasing the mm */
 #ifdef CONFIG_FUTEX
 	if (unlikely(tsk->robust_list)) {
@@ -704,17 +734,15 @@
 	/* Get rid of any cached register state */
 	deactivate_mm(tsk, mm);
 
-	/* notify parent sleeping on vfork() */
-	if (vfork_done) {
-		tsk->vfork_done = NULL;
-		complete(vfork_done);
-	}
+	if (tsk->vfork_done)
+		complete_vfork_done(tsk);
 
 	/*
 	 * If we're exiting normally, clear a user-space tid field if
 	 * requested.  We leave this alone when dying by signal, to leave
 	 * the value intact in a core dump, and to save the unnecessary
-	 * trouble otherwise.  Userland only wants this done for a sys_exit.
+	 * trouble, say, a killed vfork parent shouldn't touch this mm.
+	 * Userland only wants this done for a sys_exit.
 	 */
 	if (tsk->clear_child_tid) {
 		if (!(tsk->flags & PF_SIGNALED) &&
@@ -1018,7 +1046,6 @@
 
 	new_flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER);
 	new_flags |= PF_FORKNOEXEC;
-	new_flags |= PF_STARTING;
 	p->flags = new_flags;
 }
 
@@ -1548,16 +1575,9 @@
 		if (clone_flags & CLONE_VFORK) {
 			p->vfork_done = &vfork;
 			init_completion(&vfork);
+			get_task_struct(p);
 		}
 
-		/*
-		 * We set PF_STARTING at creation in case tracing wants to
-		 * use this to distinguish a fully live task from one that
-		 * hasn't finished SIGSTOP raising yet.  Now we clear it
-		 * and set the child going.
-		 */
-		p->flags &= ~PF_STARTING;
-
 		wake_up_new_task(p);
 
 		/* forking complete and child started to run, tell ptracer */
@@ -1565,10 +1585,8 @@
 			ptrace_event(trace, nr);
 
 		if (clone_flags & CLONE_VFORK) {
-			freezer_do_not_count();
-			wait_for_completion(&vfork);
-			freezer_count();
-			ptrace_event(PTRACE_EVENT_VFORK_DONE, nr);
+			if (!wait_for_vfork_done(p, &vfork))
+				ptrace_event(PTRACE_EVENT_VFORK_DONE, nr);
 		}
 	} else {
 		nr = PTR_ERR(p);
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 2e48ec0..c21449f 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -119,15 +119,20 @@
  * For preemptible RCU it is sufficient to call rcu_read_unlock in order
  * to exit the grace period. For classic RCU, a reschedule is required.
  */
-static void rcu_lock_break(struct task_struct *g, struct task_struct *t)
+static bool rcu_lock_break(struct task_struct *g, struct task_struct *t)
 {
+	bool can_cont;
+
 	get_task_struct(g);
 	get_task_struct(t);
 	rcu_read_unlock();
 	cond_resched();
 	rcu_read_lock();
+	can_cont = pid_alive(g) && pid_alive(t);
 	put_task_struct(t);
 	put_task_struct(g);
+
+	return can_cont;
 }
 
 /*
@@ -154,9 +159,7 @@
 			goto unlock;
 		if (!--batch_count) {
 			batch_count = HUNG_TASK_BATCHING;
-			rcu_lock_break(g, t);
-			/* Exit if t or g was unhashed during refresh. */
-			if (t->state == TASK_DEAD || g->state == TASK_DEAD)
+			if (!rcu_lock_break(g, t))
 				goto unlock;
 		}
 		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 32313c0..0f0d470 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -985,6 +985,11 @@
 
 		/* add new interrupt at end of irq queue */
 		do {
+			/*
+			 * Or all existing action->thread_mask bits,
+			 * so we can find the next zero bit for this
+			 * new action.
+			 */
 			thread_mask |= old->thread_mask;
 			old_ptr = &old->next;
 			old = *old_ptr;
@@ -993,14 +998,41 @@
 	}
 
 	/*
-	 * Setup the thread mask for this irqaction. Unlikely to have
-	 * 32 resp 64 irqs sharing one line, but who knows.
+	 * Setup the thread mask for this irqaction for ONESHOT. For
+	 * !ONESHOT irqs the thread mask is 0 so we can avoid a
+	 * conditional in irq_wake_thread().
 	 */
-	if (new->flags & IRQF_ONESHOT && thread_mask == ~0UL) {
-		ret = -EBUSY;
-		goto out_mask;
+	if (new->flags & IRQF_ONESHOT) {
+		/*
+		 * Unlikely to have 32 resp 64 irqs sharing one line,
+		 * but who knows.
+		 */
+		if (thread_mask == ~0UL) {
+			ret = -EBUSY;
+			goto out_mask;
+		}
+		/*
+		 * The thread_mask for the action is or'ed to
+		 * desc->thread_active to indicate that the
+		 * IRQF_ONESHOT thread handler has been woken, but not
+		 * yet finished. The bit is cleared when a thread
+		 * completes. When all threads of a shared interrupt
+		 * line have completed desc->threads_active becomes
+		 * zero and the interrupt line is unmasked. See
+		 * handle.c:irq_wake_thread() for further information.
+		 *
+		 * If no thread is woken by primary (hard irq context)
+		 * interrupt handlers, then desc->threads_active is
+		 * also checked for zero to unmask the irq line in the
+		 * affected hard irq flow handlers
+		 * (handle_[fasteoi|level]_irq).
+		 *
+		 * The new action gets the first zero bit of
+		 * thread_mask assigned. See the loop above which or's
+		 * all existing action->thread_mask bits.
+		 */
+		new->thread_mask = 1 << ffz(thread_mask);
 	}
-	new->thread_mask = 1 << ffz(thread_mask);
 
 	if (!shared) {
 		init_waitqueue_head(&desc->wait_for_threads);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 9788c0e..c62b854 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1334,8 +1334,10 @@
 	if (!kernel_text_address((unsigned long) p->addr) ||
 	    in_kprobes_functions((unsigned long) p->addr) ||
 	    ftrace_text_reserved(p->addr, p->addr) ||
-	    jump_label_text_reserved(p->addr, p->addr))
-		goto fail_with_jump_label;
+	    jump_label_text_reserved(p->addr, p->addr)) {
+		ret = -EINVAL;
+		goto cannot_probe;
+	}
 
 	/* User can pass only KPROBE_FLAG_DISABLED to register_kprobe */
 	p->flags &= KPROBE_FLAG_DISABLED;
@@ -1352,7 +1354,7 @@
 		 * its code to prohibit unexpected unloading.
 		 */
 		if (unlikely(!try_module_get(probed_mod)))
-			goto fail_with_jump_label;
+			goto cannot_probe;
 
 		/*
 		 * If the module freed .init.text, we couldn't insert
@@ -1361,7 +1363,7 @@
 		if (within_module_init((unsigned long)p->addr, probed_mod) &&
 		    probed_mod->state != MODULE_STATE_COMING) {
 			module_put(probed_mod);
-			goto fail_with_jump_label;
+			goto cannot_probe;
 		}
 		/* ret will be updated by following code */
 	}
@@ -1409,7 +1411,7 @@
 
 	return ret;
 
-fail_with_jump_label:
+cannot_probe:
 	preempt_enable();
 	jump_label_unlock();
 	return ret;
diff --git a/kernel/printk.c b/kernel/printk.c
index 13c0a11..32690a0 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -702,6 +702,9 @@
 #endif
 module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
 
+static bool always_kmsg_dump;
+module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR);
+
 /* Check if we have any console registered that can be called early in boot. */
 static int have_callable_console(void)
 {
@@ -1732,6 +1735,9 @@
 	unsigned long l1, l2;
 	unsigned long flags;
 
+	if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
+		return;
+
 	/* Theoretically, the log could move on after we do this, but
 	   there's not a lot we can do about that. The new messages
 	   will overwrite the start of what we dump. */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 33a0676..b342f57 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6728,7 +6728,7 @@
 static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
 			     void *hcpu)
 {
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
 		cpuset_update_active_cpus();
@@ -6741,7 +6741,7 @@
 static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
 			       void *hcpu)
 {
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_DOWN_PREPARE:
 		cpuset_update_active_cpus();
 		return NOTIFY_OK;
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 77cb245..0ab9ae8 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -818,17 +818,9 @@
 		if (obj->static_init == 1) {
 			debug_object_init(obj, &descr_type_test);
 			debug_object_activate(obj, &descr_type_test);
-			/*
-			 * Real code should return 0 here ! This is
-			 * not a fixup of some bad behaviour. We
-			 * merily call the debug_init function to keep
-			 * track of the object.
-			 */
-			return 1;
-		} else {
-			/* Real code needs to emit a warning here */
+			return 0;
 		}
-		return 0;
+		return 1;
 
 	case ODEBUG_STATE_ACTIVE:
 		debug_object_deactivate(obj, &descr_type_test);
@@ -967,7 +959,7 @@
 
 	obj.static_init = 1;
 	debug_object_activate(&obj, &descr_type_test);
-	if (check_results(&obj, ODEBUG_STATE_ACTIVE, ++fixups, warnings))
+	if (check_results(&obj, ODEBUG_STATE_ACTIVE, fixups, warnings))
 		goto out;
 	debug_object_init(&obj, &descr_type_test);
 	if (check_results(&obj, ODEBUG_STATE_INIT, ++fixups, ++warnings))
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 8e75003..38e612e 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -891,9 +891,15 @@
 	case 'U':
 		return uuid_string(buf, end, ptr, spec, fmt);
 	case 'V':
-		return buf + vsnprintf(buf, end > buf ? end - buf : 0,
-				       ((struct va_format *)ptr)->fmt,
-				       *(((struct va_format *)ptr)->va));
+		{
+			va_list va;
+
+			va_copy(va, *((struct va_format *)ptr)->va);
+			buf += vsnprintf(buf, end > buf ? end - buf : 0,
+					 ((struct va_format *)ptr)->fmt, va);
+			va_end(va);
+			return buf;
+		}
 	case 'K':
 		/*
 		 * %pK cannot be used in IRQ context because its test
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 91d3efb..8f7fc39 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -671,6 +671,7 @@
 		set_pmd_at(mm, haddr, pmd, entry);
 		prepare_pmd_huge_pte(pgtable, mm);
 		add_mm_counter(mm, MM_ANONPAGES, HPAGE_PMD_NR);
+		mm->nr_ptes++;
 		spin_unlock(&mm->page_table_lock);
 	}
 
@@ -789,6 +790,7 @@
 	pmd = pmd_mkold(pmd_wrprotect(pmd));
 	set_pmd_at(dst_mm, addr, dst_pmd, pmd);
 	prepare_pmd_huge_pte(pgtable, dst_mm);
+	dst_mm->nr_ptes++;
 
 	ret = 0;
 out_unlock:
@@ -887,7 +889,6 @@
 	}
 	kfree(pages);
 
-	mm->nr_ptes++;
 	smp_wmb(); /* make pte visible before pmd */
 	pmd_populate(mm, pmd, pgtable);
 	page_remove_rmap(page);
@@ -1047,6 +1048,7 @@
 			VM_BUG_ON(page_mapcount(page) < 0);
 			add_mm_counter(tlb->mm, MM_ANONPAGES, -HPAGE_PMD_NR);
 			VM_BUG_ON(!PageHead(page));
+			tlb->mm->nr_ptes--;
 			spin_unlock(&tlb->mm->page_table_lock);
 			tlb_remove_page(tlb, page);
 			pte_free(tlb->mm, pgtable);
@@ -1375,7 +1377,6 @@
 			pte_unmap(pte);
 		}
 
-		mm->nr_ptes++;
 		smp_wmb(); /* make pte visible before pmd */
 		/*
 		 * Up to this point the pmd is present and huge and
@@ -1988,7 +1989,6 @@
 	set_pmd_at(mm, address, pmd, _pmd);
 	update_mmu_cache(vma, address, _pmd);
 	prepare_pmd_huge_pte(pgtable, mm);
-	mm->nr_ptes--;
 	spin_unlock(&mm->page_table_lock);
 
 #ifndef CONFIG_NUMA
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 5f34bd8..a876871 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2277,8 +2277,8 @@
 			set_page_dirty(page);
 		list_add(&page->lru, &page_list);
 	}
-	spin_unlock(&mm->page_table_lock);
 	flush_tlb_range(vma, start, end);
+	spin_unlock(&mm->page_table_lock);
 	mmu_notifier_invalidate_range_end(mm, start, end);
 	list_for_each_entry_safe(page, tmp, &page_list, lru) {
 		page_remove_rmap(page);
diff --git a/mm/ksm.c b/mm/ksm.c
index 1925ffb..310544a 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -28,7 +28,6 @@
 #include <linux/kthread.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
-#include <linux/memcontrol.h>
 #include <linux/rbtree.h>
 #include <linux/memory.h>
 #include <linux/mmu_notifier.h>
@@ -1572,16 +1571,6 @@
 
 	new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
 	if (new_page) {
-		/*
-		 * The memcg-specific accounting when moving
-		 * pages around the LRU lists relies on the
-		 * page's owner (memcg) to be valid.  Usually,
-		 * pages are assigned to a new owner before
-		 * being put on the LRU list, but since this
-		 * is not the case here, the stale owner from
-		 * a previous allocation cycle must be reset.
-		 */
-		mem_cgroup_reset_owner(new_page);
 		copy_user_highpage(new_page, page, address, vma);
 
 		SetPageDirty(new_page);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 228d646..d0e57a3 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1042,6 +1042,19 @@
 
 	pc = lookup_page_cgroup(page);
 	memcg = pc->mem_cgroup;
+
+	/*
+	 * Surreptitiously switch any uncharged page to root:
+	 * an uncharged page off lru does nothing to secure
+	 * its former mem_cgroup from sudden removal.
+	 *
+	 * Our caller holds lru_lock, and PageCgroupUsed is updated
+	 * under page_cgroup lock: between them, they make all uses
+	 * of pc->mem_cgroup safe.
+	 */
+	if (!PageCgroupUsed(pc) && memcg != root_mem_cgroup)
+		pc->mem_cgroup = memcg = root_mem_cgroup;
+
 	mz = page_cgroup_zoneinfo(memcg, page);
 	/* compound_order() is stabilized through lru_lock */
 	MEM_CGROUP_ZSTAT(mz, lru) += 1 << compound_order(page);
@@ -2408,8 +2421,12 @@
 				       struct page *page,
 				       unsigned int nr_pages,
 				       struct page_cgroup *pc,
-				       enum charge_type ctype)
+				       enum charge_type ctype,
+				       bool lrucare)
 {
+	struct zone *uninitialized_var(zone);
+	bool was_on_lru = false;
+
 	lock_page_cgroup(pc);
 	if (unlikely(PageCgroupUsed(pc))) {
 		unlock_page_cgroup(pc);
@@ -2420,6 +2437,21 @@
 	 * we don't need page_cgroup_lock about tail pages, becase they are not
 	 * accessed by any other context at this point.
 	 */
+
+	/*
+	 * In some cases, SwapCache and FUSE(splice_buf->radixtree), the page
+	 * may already be on some other mem_cgroup's LRU.  Take care of it.
+	 */
+	if (lrucare) {
+		zone = page_zone(page);
+		spin_lock_irq(&zone->lru_lock);
+		if (PageLRU(page)) {
+			ClearPageLRU(page);
+			del_page_from_lru_list(zone, page, page_lru(page));
+			was_on_lru = true;
+		}
+	}
+
 	pc->mem_cgroup = memcg;
 	/*
 	 * We access a page_cgroup asynchronously without lock_page_cgroup().
@@ -2443,9 +2475,18 @@
 		break;
 	}
 
+	if (lrucare) {
+		if (was_on_lru) {
+			VM_BUG_ON(PageLRU(page));
+			SetPageLRU(page);
+			add_page_to_lru_list(zone, page, page_lru(page));
+		}
+		spin_unlock_irq(&zone->lru_lock);
+	}
+
 	mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), nr_pages);
 	unlock_page_cgroup(pc);
-	WARN_ON_ONCE(PageLRU(page));
+
 	/*
 	 * "charge_statistics" updated event counter. Then, check it.
 	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
@@ -2643,7 +2684,7 @@
 	ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom);
 	if (ret == -ENOMEM)
 		return ret;
-	__mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype);
+	__mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false);
 	return 0;
 }
 
@@ -2663,35 +2704,6 @@
 __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 					enum charge_type ctype);
 
-static void
-__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *memcg,
-					enum charge_type ctype)
-{
-	struct page_cgroup *pc = lookup_page_cgroup(page);
-	struct zone *zone = page_zone(page);
-	unsigned long flags;
-	bool removed = false;
-
-	/*
-	 * In some case, SwapCache, FUSE(splice_buf->radixtree), the page
-	 * is already on LRU. It means the page may on some other page_cgroup's
-	 * LRU. Take care of it.
-	 */
-	spin_lock_irqsave(&zone->lru_lock, flags);
-	if (PageLRU(page)) {
-		del_page_from_lru_list(zone, page, page_lru(page));
-		ClearPageLRU(page);
-		removed = true;
-	}
-	__mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
-	if (removed) {
-		add_page_to_lru_list(zone, page, page_lru(page));
-		SetPageLRU(page);
-	}
-	spin_unlock_irqrestore(&zone->lru_lock, flags);
-	return;
-}
-
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 				gfp_t gfp_mask)
 {
@@ -2769,13 +2781,16 @@
 __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg,
 					enum charge_type ctype)
 {
+	struct page_cgroup *pc;
+
 	if (mem_cgroup_disabled())
 		return;
 	if (!memcg)
 		return;
 	cgroup_exclude_rmdir(&memcg->css);
 
-	__mem_cgroup_commit_charge_lrucare(page, memcg, ctype);
+	pc = lookup_page_cgroup(page);
+	__mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true);
 	/*
 	 * Now swap is on-memory. This means this page may be
 	 * counted both as mem and swap....double count.
@@ -3027,23 +3042,6 @@
 	batch->memcg = NULL;
 }
 
-/*
- * A function for resetting pc->mem_cgroup for newly allocated pages.
- * This function should be called if the newpage will be added to LRU
- * before start accounting.
- */
-void mem_cgroup_reset_owner(struct page *newpage)
-{
-	struct page_cgroup *pc;
-
-	if (mem_cgroup_disabled())
-		return;
-
-	pc = lookup_page_cgroup(newpage);
-	VM_BUG_ON(PageCgroupUsed(pc));
-	pc->mem_cgroup = root_mem_cgroup;
-}
-
 #ifdef CONFIG_SWAP
 /*
  * called after __delete_from_swap_cache() and drop "page" account.
@@ -3248,7 +3246,7 @@
 		ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
 	else
 		ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
-	__mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype);
+	__mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false);
 	return ret;
 }
 
@@ -3332,7 +3330,7 @@
 	 * the newpage may be on LRU(or pagevec for LRU) already. We lock
 	 * LRU while we overwrite pc->mem_cgroup.
 	 */
-	__mem_cgroup_commit_charge_lrucare(newpage, memcg, type);
+	__mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true);
 }
 
 #ifdef CONFIG_DEBUG_VM
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 06b145f..47296fe 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -640,10 +640,11 @@
 	unsigned long vmstart;
 	unsigned long vmend;
 
-	vma = find_vma_prev(mm, start, &prev);
+	vma = find_vma(mm, start);
 	if (!vma || vma->vm_start > start)
 		return -EFAULT;
 
+	prev = vma->vm_prev;
 	if (start > vma->vm_start)
 		prev = vma;
 
diff --git a/mm/migrate.c b/mm/migrate.c
index df141f6..1503b6b 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -839,8 +839,6 @@
 	if (!newpage)
 		return -ENOMEM;
 
-	mem_cgroup_reset_owner(newpage);
-
 	if (page_count(page) == 1) {
 		/* page was freed from under us. So we are done. */
 		goto out;
diff --git a/mm/mlock.c b/mm/mlock.c
index 4f4f53b..ef726e8 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -385,10 +385,11 @@
 		return -EINVAL;
 	if (end == start)
 		return 0;
-	vma = find_vma_prev(current->mm, start, &prev);
+	vma = find_vma(current->mm, start);
 	if (!vma || vma->vm_start > start)
 		return -ENOMEM;
 
+	prev = vma->vm_prev;
 	if (start > vma->vm_start)
 		prev = vma;
 
diff --git a/mm/mmap.c b/mm/mmap.c
index 3f758c7..da15a79 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1266,8 +1266,9 @@
 	vma->vm_pgoff = pgoff;
 	INIT_LIST_HEAD(&vma->anon_vma_chain);
 
+	error = -EINVAL;	/* when rejecting VM_GROWSDOWN|VM_GROWSUP */
+
 	if (file) {
-		error = -EINVAL;
 		if (vm_flags & (VM_GROWSDOWN|VM_GROWSUP))
 			goto free_vma;
 		if (vm_flags & VM_DENYWRITE) {
@@ -1293,6 +1294,8 @@
 		pgoff = vma->vm_pgoff;
 		vm_flags = vma->vm_flags;
 	} else if (vm_flags & VM_SHARED) {
+		if (unlikely(vm_flags & (VM_GROWSDOWN|VM_GROWSUP)))
+			goto free_vma;
 		error = shmem_zero_setup(vma);
 		if (error)
 			goto free_vma;
@@ -1605,7 +1608,6 @@
 
 /*
  * Same as find_vma, but also return a pointer to the previous VMA in *pprev.
- * Note: pprev is set to NULL when return value is NULL.
  */
 struct vm_area_struct *
 find_vma_prev(struct mm_struct *mm, unsigned long addr,
@@ -1614,7 +1616,16 @@
 	struct vm_area_struct *vma;
 
 	vma = find_vma(mm, addr);
-	*pprev = vma ? vma->vm_prev : NULL;
+	if (vma) {
+		*pprev = vma->vm_prev;
+	} else {
+		struct rb_node *rb_node = mm->mm_rb.rb_node;
+		*pprev = NULL;
+		while (rb_node) {
+			*pprev = rb_entry(rb_node, struct vm_area_struct, vm_rb);
+			rb_node = rb_node->rb_right;
+		}
+	}
 	return vma;
 }
 
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 5a688a2..f437d05 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -262,10 +262,11 @@
 
 	down_write(&current->mm->mmap_sem);
 
-	vma = find_vma_prev(current->mm, start, &prev);
+	vma = find_vma(current->mm, start);
 	error = -ENOMEM;
 	if (!vma)
 		goto out;
+	prev = vma->vm_prev;
 	if (unlikely(grows & PROT_GROWSDOWN)) {
 		if (vma->vm_start >= end)
 			goto out;
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index de1616a..1ccbd71 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -379,13 +379,15 @@
 	pgoff_t offset = swp_offset(ent);
 	struct swap_cgroup_ctrl *ctrl;
 	struct page *mappage;
+	struct swap_cgroup *sc;
 
 	ctrl = &swap_cgroup_ctrl[swp_type(ent)];
 	if (ctrlp)
 		*ctrlp = ctrl;
 
 	mappage = ctrl->map[offset / SC_PER_PAGE];
-	return page_address(mappage) + offset % SC_PER_PAGE;
+	sc = page_address(mappage);
+	return sc + offset % SC_PER_PAGE;
 }
 
 /**
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 12a48a88..405d331 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -184,8 +184,7 @@
 				   page_end - page_start);
 	}
 
-	for (i = page_start; i < page_end; i++)
-		__clear_bit(i, populated);
+	bitmap_clear(populated, page_start, page_end - page_start);
 }
 
 /**
diff --git a/mm/swap.c b/mm/swap.c
index fff1ff7..14380e9 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -652,7 +652,7 @@
 void lru_add_page_tail(struct zone* zone,
 		       struct page *page, struct page *page_tail)
 {
-	int active;
+	int uninitialized_var(active);
 	enum lru_list lru;
 	const int file = 0;
 
@@ -672,7 +672,6 @@
 			active = 0;
 			lru = LRU_INACTIVE_ANON;
 		}
-		update_page_reclaim_stat(zone, page_tail, file, active);
 	} else {
 		SetPageUnevictable(page_tail);
 		lru = LRU_UNEVICTABLE;
@@ -693,6 +692,9 @@
 		list_head = page_tail->lru.prev;
 		list_move_tail(&page_tail->lru, list_head);
 	}
+
+	if (!PageUnevictable(page))
+		update_page_reclaim_stat(zone, page_tail, file, active);
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
@@ -710,8 +712,8 @@
 	SetPageLRU(page);
 	if (active)
 		SetPageActive(page);
-	update_page_reclaim_stat(zone, page, file, active);
 	add_page_to_lru_list(zone, page, lru);
+	update_page_reclaim_stat(zone, page, file, active);
 }
 
 /*
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 470038a..ea6b32d 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -300,16 +300,6 @@
 			new_page = alloc_page_vma(gfp_mask, vma, addr);
 			if (!new_page)
 				break;		/* Out of memory */
-			/*
-			 * The memcg-specific accounting when moving
-			 * pages around the LRU lists relies on the
-			 * page's owner (memcg) to be valid.  Usually,
-			 * pages are assigned to a new owner before
-			 * being put on the LRU list, but since this
-			 * is not the case here, the stale owner from
-			 * a previous allocation cycle must be reset.
-			 */
-			mem_cgroup_reset_owner(new_page);
 		}
 
 		/*
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 568d5bf..702a1ae 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -446,8 +446,11 @@
 	ip6h->nexthdr = IPPROTO_HOPOPTS;
 	ip6h->hop_limit = 1;
 	ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1));
-	ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
-			   &ip6h->saddr);
+	if (ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
+			       &ip6h->saddr)) {
+		kfree_skb(skb);
+		return NULL;
+	}
 	ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest);
 
 	hopopt = (u8 *)(ip6h + 1);
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 8412247..dec4f38 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -62,6 +62,15 @@
 #define brnf_filter_pppoe_tagged 0
 #endif
 
+#define IS_IP(skb) \
+	(!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IP))
+
+#define IS_IPV6(skb) \
+	(!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IPV6))
+
+#define IS_ARP(skb) \
+	(!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_ARP))
+
 static inline __be16 vlan_proto(const struct sk_buff *skb)
 {
 	if (vlan_tx_tag_present(skb))
@@ -639,8 +648,7 @@
 		return NF_DROP;
 	br = p->br;
 
-	if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
-	    IS_PPPOE_IPV6(skb)) {
+	if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb)) {
 		if (!brnf_call_ip6tables && !br->nf_call_ip6tables)
 			return NF_ACCEPT;
 
@@ -651,8 +659,7 @@
 	if (!brnf_call_iptables && !br->nf_call_iptables)
 		return NF_ACCEPT;
 
-	if (skb->protocol != htons(ETH_P_IP) && !IS_VLAN_IP(skb) &&
-	    !IS_PPPOE_IP(skb))
+	if (!IS_IP(skb) && !IS_VLAN_IP(skb) && !IS_PPPOE_IP(skb))
 		return NF_ACCEPT;
 
 	nf_bridge_pull_encap_header_rcsum(skb);
@@ -701,7 +708,7 @@
 	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
 	struct net_device *in;
 
-	if (skb->protocol != htons(ETH_P_ARP) && !IS_VLAN_ARP(skb)) {
+	if (!IS_ARP(skb) && !IS_VLAN_ARP(skb)) {
 		in = nf_bridge->physindev;
 		if (nf_bridge->mask & BRNF_PKT_TYPE) {
 			skb->pkt_type = PACKET_OTHERHOST;
@@ -718,6 +725,7 @@
 	return 0;
 }
 
+
 /* This is the 'purely bridged' case.  For IP, we pass the packet to
  * netfilter with indev and outdev set to the bridge device,
  * but we are still able to filter on the 'real' indev/outdev
@@ -744,11 +752,9 @@
 	if (!parent)
 		return NF_DROP;
 
-	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
-	    IS_PPPOE_IP(skb))
+	if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
-		 IS_PPPOE_IPV6(skb))
+	else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
 	else
 		return NF_ACCEPT;
@@ -795,7 +801,7 @@
 	if (!brnf_call_arptables && !br->nf_call_arptables)
 		return NF_ACCEPT;
 
-	if (skb->protocol != htons(ETH_P_ARP)) {
+	if (!IS_ARP(skb)) {
 		if (!IS_VLAN_ARP(skb))
 			return NF_ACCEPT;
 		nf_bridge_pull_encap_header(skb);
@@ -853,11 +859,9 @@
 	if (!realoutdev)
 		return NF_DROP;
 
-	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
-	    IS_PPPOE_IP(skb))
+	if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
-		 IS_PPPOE_IPV6(skb))
+	else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
 	else
 		return NF_ACCEPT;
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index dd147d7..8c836d9 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -17,9 +17,9 @@
 #include "br_private_stp.h"
 
 /* since time values in bpdu are in jiffies and then scaled (1/256)
- * before sending, make sure that is at least one.
+ * before sending, make sure that is at least one STP tick.
  */
-#define MESSAGE_AGE_INCR	((HZ < 256) ? 1 : (HZ/256))
+#define MESSAGE_AGE_INCR	((HZ / 256) + 1)
 
 static const char *const br_port_state_names[] = {
 	[BR_STATE_DISABLED] = "disabled",
@@ -31,7 +31,7 @@
 
 void br_log_state(const struct net_bridge_port *p)
 {
-	br_info(p->br, "port %u(%s) entering %s state\n",
+	br_info(p->br, "port %u(%s) entered %s state\n",
 		(unsigned) p->port_no, p->dev->name,
 		br_port_state_names[p->state]);
 }
@@ -186,7 +186,7 @@
 	p->designated_cost = bpdu->root_path_cost;
 	p->designated_bridge = bpdu->bridge_id;
 	p->designated_port = bpdu->port_id;
-	p->designated_age = jiffies + bpdu->message_age;
+	p->designated_age = jiffies - bpdu->message_age;
 
 	mod_timer(&p->message_age_timer, jiffies
 		  + (p->br->max_age - bpdu->message_age));
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 19308e3..f494496 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -98,14 +98,13 @@
 	struct net_bridge *br = p->br;
 	int wasroot;
 
-	br_log_state(p);
-
 	wasroot = br_is_root_bridge(br);
 	br_become_designated_port(p);
 	p->state = BR_STATE_DISABLED;
 	p->topology_change_ack = 0;
 	p->config_pending = 0;
 
+	br_log_state(p);
 	br_ifinfo_notify(RTM_NEWLINK, p);
 
 	del_timer(&p->message_age_timer);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 5864cc4..5fe2ff3 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1335,7 +1335,12 @@
     const char *base, char __user *ubase)
 {
 	char __user *hlp = ubase + ((char *)m - base);
-	if (copy_to_user(hlp, m->u.match->name, EBT_FUNCTION_MAXNAMELEN))
+	char name[EBT_FUNCTION_MAXNAMELEN] = {};
+
+	/* ebtables expects 32 bytes long names but xt_match names are 29 bytes
+	   long. Copy 29 bytes and fill remaining bytes with zeroes. */
+	strncpy(name, m->u.match->name, sizeof(name));
+	if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN))
 		return -EFAULT;
 	return 0;
 }
@@ -1344,7 +1349,10 @@
     const char *base, char __user *ubase)
 {
 	char __user *hlp = ubase + ((char *)w - base);
-	if (copy_to_user(hlp , w->u.watcher->name, EBT_FUNCTION_MAXNAMELEN))
+	char name[EBT_FUNCTION_MAXNAMELEN] = {};
+
+	strncpy(name, w->u.watcher->name, sizeof(name));
+	if (copy_to_user(hlp , name, EBT_FUNCTION_MAXNAMELEN))
 		return -EFAULT;
 	return 0;
 }
@@ -1355,6 +1363,7 @@
 	int ret;
 	char __user *hlp;
 	const struct ebt_entry_target *t;
+	char name[EBT_FUNCTION_MAXNAMELEN] = {};
 
 	if (e->bitmask == 0)
 		return 0;
@@ -1368,7 +1377,8 @@
 	ret = EBT_WATCHER_ITERATE(e, ebt_make_watchername, base, ubase);
 	if (ret != 0)
 		return ret;
-	if (copy_to_user(hlp, t->u.target->name, EBT_FUNCTION_MAXNAMELEN))
+	strncpy(name, t->u.target->name, sizeof(name));
+	if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN))
 		return -EFAULT;
 	return 0;
 }
@@ -1893,10 +1903,7 @@
 
 	switch (compat_mwt) {
 	case EBT_COMPAT_MATCH:
-		match = try_then_request_module(xt_find_match(NFPROTO_BRIDGE,
-						name, 0), "ebt_%s", name);
-		if (match == NULL)
-			return -ENOENT;
+		match = xt_request_find_match(NFPROTO_BRIDGE, name, 0);
 		if (IS_ERR(match))
 			return PTR_ERR(match);
 
@@ -1915,10 +1922,7 @@
 		break;
 	case EBT_COMPAT_WATCHER: /* fallthrough */
 	case EBT_COMPAT_TARGET:
-		wt = try_then_request_module(xt_find_target(NFPROTO_BRIDGE,
-						name, 0), "ebt_%s", name);
-		if (wt == NULL)
-			return -ENOENT;
+		wt = xt_request_find_target(NFPROTO_BRIDGE, name, 0);
 		if (IS_ERR(wt))
 			return PTR_ERR(wt);
 		off = xt_compat_target_offset(wt);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 606a6e8..f965dce 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1060,11 +1060,12 @@
 	rcu_read_lock();
 	cb->seq = net->dev_base_seq;
 
-	nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
-		    ifla_policy);
+	if (nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+			ifla_policy) >= 0) {
 
-	if (tb[IFLA_EXT_MASK])
-		ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+		if (tb[IFLA_EXT_MASK])
+			ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+	}
 
 	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
 		idx = 0;
@@ -1900,10 +1901,11 @@
 	u32 ext_filter_mask = 0;
 	u16 min_ifinfo_dump_size = 0;
 
-	nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy);
-
-	if (tb[IFLA_EXT_MASK])
-		ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+	if (nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+			ifla_policy) >= 0) {
+		if (tb[IFLA_EXT_MASK])
+			ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+	}
 
 	if (!ext_filter_mask)
 		return NLMSG_GOODSIZE;
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index bf4a9c4..d4d61b6 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/net.h>
+#include <linux/workqueue.h>
 #include <net/ip.h>
 #include <net/inetpeer.h>
 #include <net/secure_seq.h>
@@ -66,6 +67,11 @@
 
 static struct kmem_cache *peer_cachep __read_mostly;
 
+static LIST_HEAD(gc_list);
+static const int gc_delay = 60 * HZ;
+static struct delayed_work gc_work;
+static DEFINE_SPINLOCK(gc_lock);
+
 #define node_height(x) x->avl_height
 
 #define peer_avl_empty ((struct inet_peer *)&peer_fake_node)
@@ -102,6 +108,50 @@
 int inet_peer_minttl __read_mostly = 120 * HZ;	/* TTL under high load: 120 sec */
 int inet_peer_maxttl __read_mostly = 10 * 60 * HZ;	/* usual time to live: 10 min */
 
+static void inetpeer_gc_worker(struct work_struct *work)
+{
+	struct inet_peer *p, *n;
+	LIST_HEAD(list);
+
+	spin_lock_bh(&gc_lock);
+	list_replace_init(&gc_list, &list);
+	spin_unlock_bh(&gc_lock);
+
+	if (list_empty(&list))
+		return;
+
+	list_for_each_entry_safe(p, n, &list, gc_list) {
+
+		if(need_resched())
+			cond_resched();
+
+		if (p->avl_left != peer_avl_empty) {
+			list_add_tail(&p->avl_left->gc_list, &list);
+			p->avl_left = peer_avl_empty;
+		}
+
+		if (p->avl_right != peer_avl_empty) {
+			list_add_tail(&p->avl_right->gc_list, &list);
+			p->avl_right = peer_avl_empty;
+		}
+
+		n = list_entry(p->gc_list.next, struct inet_peer, gc_list);
+
+		if (!atomic_read(&p->refcnt)) {
+			list_del(&p->gc_list);
+			kmem_cache_free(peer_cachep, p);
+		}
+	}
+
+	if (list_empty(&list))
+		return;
+
+	spin_lock_bh(&gc_lock);
+	list_splice(&list, &gc_list);
+	spin_unlock_bh(&gc_lock);
+
+	schedule_delayed_work(&gc_work, gc_delay);
+}
 
 /* Called from ip_output.c:ip_init  */
 void __init inet_initpeers(void)
@@ -126,6 +176,7 @@
 			0, SLAB_HWCACHE_ALIGN | SLAB_PANIC,
 			NULL);
 
+	INIT_DELAYED_WORK_DEFERRABLE(&gc_work, inetpeer_gc_worker);
 }
 
 static int addr_compare(const struct inetpeer_addr *a,
@@ -447,9 +498,8 @@
 		p->rate_last = 0;
 		p->pmtu_expires = 0;
 		p->pmtu_orig = 0;
-		p->redirect_genid = 0;
 		memset(&p->redirect_learned, 0, sizeof(p->redirect_learned));
-
+		INIT_LIST_HEAD(&p->gc_list);
 
 		/* Link the node. */
 		link_to_pool(p, base);
@@ -509,3 +559,30 @@
 	return rc;
 }
 EXPORT_SYMBOL(inet_peer_xrlim_allow);
+
+void inetpeer_invalidate_tree(int family)
+{
+	struct inet_peer *old, *new, *prev;
+	struct inet_peer_base *base = family_to_base(family);
+
+	write_seqlock_bh(&base->lock);
+
+	old = base->root;
+	if (old == peer_avl_empty_rcu)
+		goto out;
+
+	new = peer_avl_empty_rcu;
+
+	prev = cmpxchg(&base->root, old, new);
+	if (prev == old) {
+		base->total = 0;
+		spin_lock(&gc_lock);
+		list_add_tail(&prev->gc_list, &gc_list);
+		spin_unlock(&gc_lock);
+		schedule_delayed_work(&gc_work, gc_delay);
+	}
+
+out:
+	write_sequnlock_bh(&base->lock);
+}
+EXPORT_SYMBOL(inetpeer_invalidate_tree);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index bcacf54..0197747 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -132,7 +132,6 @@
 static int ip_rt_min_pmtu __read_mostly		= 512 + 20 + 20;
 static int ip_rt_min_advmss __read_mostly	= 256;
 static int rt_chain_length_max __read_mostly	= 20;
-static int redirect_genid;
 
 static struct delayed_work expires_work;
 static unsigned long expires_ljiffies;
@@ -937,7 +936,7 @@
 
 	get_random_bytes(&shuffle, sizeof(shuffle));
 	atomic_add(shuffle + 1U, &net->ipv4.rt_genid);
-	redirect_genid++;
+	inetpeer_invalidate_tree(AF_INET);
 }
 
 /*
@@ -1485,10 +1484,8 @@
 
 				peer = rt->peer;
 				if (peer) {
-					if (peer->redirect_learned.a4 != new_gw ||
-					    peer->redirect_genid != redirect_genid) {
+					if (peer->redirect_learned.a4 != new_gw) {
 						peer->redirect_learned.a4 = new_gw;
-						peer->redirect_genid = redirect_genid;
 						atomic_inc(&__rt_peer_genid);
 					}
 					check_peer_redir(&rt->dst, peer);
@@ -1793,8 +1790,6 @@
 		if (peer) {
 			check_peer_pmtu(&rt->dst, peer);
 
-			if (peer->redirect_genid != redirect_genid)
-				peer->redirect_learned.a4 = 0;
 			if (peer->redirect_learned.a4 &&
 			    peer->redirect_learned.a4 != rt->rt_gateway)
 				check_peer_redir(&rt->dst, peer);
@@ -1958,8 +1953,7 @@
 		dst_init_metrics(&rt->dst, peer->metrics, false);
 
 		check_peer_pmtu(&rt->dst, peer);
-		if (peer->redirect_genid != redirect_genid)
-			peer->redirect_learned.a4 = 0;
+
 		if (peer->redirect_learned.a4 &&
 		    peer->redirect_learned.a4 != rt->rt_gateway) {
 			rt->rt_gateway = peer->redirect_learned.a4;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 53c8ce4..b5e315f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1403,8 +1403,16 @@
 
 	BUG_ON(!pcount);
 
-	/* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
-	if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
+	/* Adjust counters and hints for the newly sacked sequence
+	 * range but discard the return value since prev is already
+	 * marked. We must tag the range first because the seq
+	 * advancement below implicitly advances
+	 * tcp_highest_sack_seq() when skb is highest_sack.
+	 */
+	tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+			start_seq, end_seq, dup_sack, pcount);
+
+	if (skb == tp->lost_skb_hint)
 		tp->lost_cnt_hint += pcount;
 
 	TCP_SKB_CB(prev)->end_seq += shifted;
@@ -1430,12 +1438,6 @@
 		skb_shinfo(skb)->gso_type = 0;
 	}
 
-	/* Adjust counters and hints for the newly sacked sequence range but
-	 * discard the return value since prev is already marked.
-	 */
-	tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
-			start_seq, end_seq, dup_sack, pcount);
-
 	/* Difference in this won't matter, both ACKed by the same cumul. ACK */
 	TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
 
@@ -1583,6 +1585,10 @@
 		}
 	}
 
+	/* tcp_sacktag_one() won't SACK-tag ranges below snd_una */
+	if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una))
+		goto fallback;
+
 	if (!skb_shift(prev, skb, len))
 		goto fallback;
 	if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
@@ -2567,6 +2573,7 @@
 
 		if (cnt > packets) {
 			if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
+			    (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) ||
 			    (oldcnt >= packets))
 				break;
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index c02280a..6b8ebc5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -434,6 +434,10 @@
 	/* Join all-node multicast group */
 	ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes);
 
+	/* Join all-router multicast group if forwarding is set */
+	if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST))
+		ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters);
+
 	return ndev;
 }
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 01a21c2..8e2137b 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1332,6 +1332,9 @@
 		hw_roc = true;
 
 	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
 		if (sdata->old_idle == sdata->vif.bss_conf.idle)
 			continue;
 		if (!ieee80211_sdata_running(sdata))
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index ad64f4d..f9b8e81 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -344,7 +344,7 @@
 	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
 		info->control.rates[i].idx = -1;
 		info->control.rates[i].flags = 0;
-		info->control.rates[i].count = 1;
+		info->control.rates[i].count = 0;
 	}
 
 	if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index ed86a3b..fa4b82c 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -635,8 +635,12 @@
 
 	if (del_timer(&ct->timeout)) {
 		death_by_timeout((unsigned long)ct);
-		dropped = 1;
-		NF_CT_STAT_INC_ATOMIC(net, early_drop);
+		/* Check if we indeed killed this entry. Reliable event
+		   delivery may have inserted it into the dying list. */
+		if (test_bit(IPS_DYING_BIT, &ct->status)) {
+			dropped = 1;
+			NF_CT_STAT_INC_ATOMIC(net, early_drop);
+		}
 	}
 	nf_ct_put(ct);
 	return dropped;
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 30c9d4c..1068769 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1041,16 +1041,13 @@
 	if (!parse_nat_setup) {
 #ifdef CONFIG_MODULES
 		rcu_read_unlock();
-		spin_unlock_bh(&nf_conntrack_lock);
 		nfnl_unlock();
 		if (request_module("nf-nat-ipv4") < 0) {
 			nfnl_lock();
-			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			return -EOPNOTSUPP;
 		}
 		nfnl_lock();
-		spin_lock_bh(&nf_conntrack_lock);
 		rcu_read_lock();
 		if (nfnetlink_parse_nat_setup_hook)
 			return -EAGAIN;
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 2725d1b..48badff 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2007-2011 Nicira Networks.
+ * Copyright (c) 2007-2012 Nicira Networks.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of version 2 of the GNU General Public
@@ -145,9 +145,16 @@
 			inet_proto_csum_replace4(&tcp_hdr(skb)->check, skb,
 						 *addr, new_addr, 1);
 	} else if (nh->protocol == IPPROTO_UDP) {
-		if (likely(transport_len >= sizeof(struct udphdr)))
-			inet_proto_csum_replace4(&udp_hdr(skb)->check, skb,
-						 *addr, new_addr, 1);
+		if (likely(transport_len >= sizeof(struct udphdr))) {
+			struct udphdr *uh = udp_hdr(skb);
+
+			if (uh->check || skb->ip_summed == CHECKSUM_PARTIAL) {
+				inet_proto_csum_replace4(&uh->check, skb,
+							 *addr, new_addr, 1);
+				if (!uh->check)
+					uh->check = CSUM_MANGLED_0;
+			}
+		}
 	}
 
 	csum_replace4(&nh->check, *addr, new_addr);
@@ -197,8 +204,22 @@
 	skb->rxhash = 0;
 }
 
-static int set_udp_port(struct sk_buff *skb,
-			const struct ovs_key_udp *udp_port_key)
+static void set_udp_port(struct sk_buff *skb, __be16 *port, __be16 new_port)
+{
+	struct udphdr *uh = udp_hdr(skb);
+
+	if (uh->check && skb->ip_summed != CHECKSUM_PARTIAL) {
+		set_tp_port(skb, port, new_port, &uh->check);
+
+		if (!uh->check)
+			uh->check = CSUM_MANGLED_0;
+	} else {
+		*port = new_port;
+		skb->rxhash = 0;
+	}
+}
+
+static int set_udp(struct sk_buff *skb, const struct ovs_key_udp *udp_port_key)
 {
 	struct udphdr *uh;
 	int err;
@@ -210,16 +231,15 @@
 
 	uh = udp_hdr(skb);
 	if (udp_port_key->udp_src != uh->source)
-		set_tp_port(skb, &uh->source, udp_port_key->udp_src, &uh->check);
+		set_udp_port(skb, &uh->source, udp_port_key->udp_src);
 
 	if (udp_port_key->udp_dst != uh->dest)
-		set_tp_port(skb, &uh->dest, udp_port_key->udp_dst, &uh->check);
+		set_udp_port(skb, &uh->dest, udp_port_key->udp_dst);
 
 	return 0;
 }
 
-static int set_tcp_port(struct sk_buff *skb,
-			const struct ovs_key_tcp *tcp_port_key)
+static int set_tcp(struct sk_buff *skb, const struct ovs_key_tcp *tcp_port_key)
 {
 	struct tcphdr *th;
 	int err;
@@ -328,11 +348,11 @@
 		break;
 
 	case OVS_KEY_ATTR_TCP:
-		err = set_tcp_port(skb, nla_data(nested_attr));
+		err = set_tcp(skb, nla_data(nested_attr));
 		break;
 
 	case OVS_KEY_ATTR_UDP:
-		err = set_udp_port(skb, nla_data(nested_attr));
+		err = set_udp(skb, nla_data(nested_attr));
 		break;
 	}
 
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index ce64c18..2c03050 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -1521,6 +1521,9 @@
 		vport = ovs_vport_locate(nla_data(a[OVS_VPORT_ATTR_NAME]));
 		if (!vport)
 			return ERR_PTR(-ENODEV);
+		if (ovs_header->dp_ifindex &&
+		    ovs_header->dp_ifindex != get_dpifindex(vport->dp))
+			return ERR_PTR(-ENODEV);
 		return vport;
 	} else if (a[OVS_VPORT_ATTR_PORT_NO]) {
 		u32 port_no = nla_get_u32(a[OVS_VPORT_ATTR_PORT_NO]);
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f286bb8..22c73b7 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2068,12 +2068,16 @@
  */
 
 static void alc_init_special_input_src(struct hda_codec *codec);
+static int alc269_fill_coef(struct hda_codec *codec);
 
 static int alc_init(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	unsigned int i;
 
+	if (codec->vendor_id == 0x10ec0269)
+		alc269_fill_coef(codec);
+
 	alc_fix_pll(codec);
 	alc_auto_init_amp(codec, spec->init_amp);
 
@@ -4367,6 +4371,7 @@
 	ALC882_FIXUP_PB_M5210,
 	ALC882_FIXUP_ACER_ASPIRE_7736,
 	ALC882_FIXUP_ASUS_W90V,
+	ALC889_FIXUP_CD,
 	ALC889_FIXUP_VAIO_TT,
 	ALC888_FIXUP_EEE1601,
 	ALC882_FIXUP_EAPD,
@@ -4494,6 +4499,13 @@
 			{ }
 		}
 	},
+	[ALC889_FIXUP_CD] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x1c, 0x993301f0 }, /* CD */
+			{ }
+		}
+	},
 	[ALC889_FIXUP_VAIO_TT] = {
 		.type = ALC_FIXUP_PINS,
 		.v.pins = (const struct alc_pincfg[]) {
@@ -4650,6 +4662,7 @@
 
 	SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
+	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3", ALC889_FIXUP_CD),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
@@ -5467,8 +5480,12 @@
 
 static int alc269_fill_coef(struct hda_codec *codec)
 {
+	struct alc_spec *spec = codec->spec;
 	int val;
 
+	if (spec->codec_variant != ALC269_TYPE_ALC269VB)
+		return 0;
+
 	if ((alc_get_coef0(codec) & 0x00ff) < 0x015) {
 		alc_write_coef_idx(codec, 0xf, 0x960b);
 		alc_write_coef_idx(codec, 0xe, 0x8817);
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index cc9f6c8..bc030a2 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6333,6 +6333,7 @@
 
 	hw->ops.open = snd_hdspm_hwdep_dummy_op;
 	hw->ops.ioctl = snd_hdspm_hwdep_ioctl;
+	hw->ops.ioctl_compat = snd_hdspm_hwdep_ioctl;
 	hw->ops.release = snd_hdspm_hwdep_dummy_op;
 
 	return 0;
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index c6012ff..d23b19a 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -367,7 +367,7 @@
 	.platform_name = "samsung-audio",
 	.cpu_dai_name = "s3c24xx-iis",
 	.codec_dai_name = "wm8753-hifi",
-	.codec_name = "wm8753-codec.0-001a",
+	.codec_name = "wm8753.0-001a",
 	.init = neo1973_wm8753_init,
 	.ops = &neo1973_hifi_ops,
 },
@@ -376,7 +376,7 @@
 	.stream_name = "Voice",
 	.cpu_dai_name = "dfbmcs320-pcm",
 	.codec_dai_name = "wm8753-voice",
-	.codec_name = "wm8753-codec.0-001a",
+	.codec_name = "wm8753.0-001a",
 	.ops = &neo1973_voice_ops,
 },
 };
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 0abfb18..227b6ae 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -204,6 +204,9 @@
 
 		if (opts->group && pos != first)
 			group_fd = first->fd;
+fallback_missing_features:
+		if (opts->exclude_guest_missing)
+			attr->exclude_guest = attr->exclude_host = 0;
 retry_sample_id:
 		attr->sample_id_all = opts->sample_id_all_avail ? 1 : 0;
 try_again:
@@ -217,15 +220,23 @@
 			} else if (err ==  ENODEV && opts->cpu_list) {
 				die("No such device - did you specify"
 					" an out-of-range profile CPU?\n");
-			} else if (err == EINVAL && opts->sample_id_all_avail) {
-				/*
-				 * Old kernel, no attr->sample_id_type_all field
-				 */
-				opts->sample_id_all_avail = false;
-				if (!opts->sample_time && !opts->raw_samples && !time_needed)
-					attr->sample_type &= ~PERF_SAMPLE_TIME;
+			} else if (err == EINVAL) {
+				if (!opts->exclude_guest_missing &&
+				    (attr->exclude_guest || attr->exclude_host)) {
+					pr_debug("Old kernel, cannot exclude "
+						 "guest or host samples.\n");
+					opts->exclude_guest_missing = true;
+					goto fallback_missing_features;
+				} else if (opts->sample_id_all_avail) {
+					/*
+					 * Old kernel, no attr->sample_id_type_all field
+					 */
+					opts->sample_id_all_avail = false;
+					if (!opts->sample_time && !opts->raw_samples && !time_needed)
+						attr->sample_type &= ~PERF_SAMPLE_TIME;
 
-				goto retry_sample_id;
+					goto retry_sample_id;
+				}
 			}
 
 			/*
@@ -503,9 +514,9 @@
 			return err;
 	}
 
-	if (!!rec->no_buildid
+	if (!rec->no_buildid
 	    && !perf_header__has_feat(&session->header, HEADER_BUILD_ID)) {
-		pr_err("Couldn't generating buildids. "
+		pr_err("Couldn't generate buildids. "
 		       "Use --no-buildid to profile anyway.\n");
 		return -1;
 	}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index dd162aa..ecff312 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -857,6 +857,9 @@
 		attr->mmap = 1;
 		attr->comm = 1;
 		attr->inherit = top->inherit;
+fallback_missing_features:
+		if (top->exclude_guest_missing)
+			attr->exclude_guest = attr->exclude_host = 0;
 retry_sample_id:
 		attr->sample_id_all = top->sample_id_all_avail ? 1 : 0;
 try_again:
@@ -868,12 +871,20 @@
 			if (err == EPERM || err == EACCES) {
 				ui__error_paranoid();
 				goto out_err;
-			} else if (err == EINVAL && top->sample_id_all_avail) {
-				/*
-				 * Old kernel, no attr->sample_id_type_all field
-				 */
-				top->sample_id_all_avail = false;
-				goto retry_sample_id;
+			} else if (err == EINVAL) {
+				if (!top->exclude_guest_missing &&
+				    (attr->exclude_guest || attr->exclude_host)) {
+					pr_debug("Old kernel, cannot exclude "
+						 "guest or host samples.\n");
+					top->exclude_guest_missing = true;
+					goto fallback_missing_features;
+				} else if (top->sample_id_all_avail) {
+					/*
+					 * Old kernel, no attr->sample_id_type_all field
+					 */
+					top->sample_id_all_avail = false;
+					goto retry_sample_id;
+				}
 			}
 			/*
 			 * If it's cycles then fall back to hrtimer
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 64f8bee..16e7d20 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -199,6 +199,7 @@
 	bool	     sample_address;
 	bool	     sample_time;
 	bool	     sample_id_all_avail;
+	bool	     exclude_guest_missing;
 	bool	     system_wide;
 	bool	     period;
 	unsigned int freq;
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index a248f3c..f2eab81 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -34,6 +34,7 @@
 	bool		   inherit;
 	bool		   group;
 	bool		   sample_id_all_avail;
+	bool		   exclude_guest_missing;
 	bool		   dump_symtab;
 	const char	   *cpu_list;
 	struct hist_entry  *sym_filter_entry;
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 8131410..fb25d13 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -6,7 +6,7 @@
  * XXX We need to find a better place for these things...
  */
 bool perf_host  = true;
-bool perf_guest = true;
+bool perf_guest = false;
 
 void event_attr_init(struct perf_event_attr *attr)
 {