x86: merge tsc calibration
Merge the tsc calibration code for the 32bit and 64bit kernel.
The paravirtualized calculate_cpu_khz for 64bit now points to the correct
tsc_calibrate code as in 32bit.
Original native_calculate_cpu_khz for 64 bit is now called as calibrate_cpu.
Also moved the recalibrate_cpu_khz function in the common file.
Note that this function is called only from powernow K7 cpu freq driver.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 39ae851..c6ac4da 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -56,7 +56,7 @@
/* calibrate_cpu is used on systems with fixed rate TSCs to determine
* processor frequency */
#define TICK_COUNT 100000000
-unsigned long __init native_calculate_cpu_khz(void)
+static unsigned long __init calibrate_cpu(void)
{
int tsc_start, tsc_now;
int i, no_ctr_free;
@@ -114,14 +114,18 @@
setup_irq(0, &irq0);
}
+extern void set_cyc2ns_scale(unsigned long cpu_khz, int cpu);
+
void __init time_init(void)
{
- tsc_calibrate();
+ int cpu;
- cpu_khz = tsc_khz;
+ cpu_khz = calculate_cpu_khz();
+ tsc_khz = cpu_khz;
+
if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
- (boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
- cpu_khz = calculate_cpu_khz();
+ (boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
+ cpu_khz = calibrate_cpu();
lpj_fine = ((unsigned long)tsc_khz * 1000)/HZ;
@@ -134,7 +138,17 @@
vgetcpu_mode = VGETCPU_LSL;
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
- cpu_khz / 1000, cpu_khz % 1000);
+ cpu_khz / 1000, cpu_khz % 1000);
+
+ /*
+ * Secondary CPUs do not run through tsc_init(), so set up
+ * all the scale factors for all CPUs, assuming the same
+ * speed as the bootup CPU. (cpufreq notifiers will fix this
+ * up if their speed diverges)
+ */
+ for_each_possible_cpu(cpu)
+ set_cyc2ns_scale(cpu_khz, cpu);
+
init_tsc_clocksource();
late_time_init = choose_time_init();
}
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 5d0be77..e6ee145 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -1,7 +1,11 @@
+#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/timer.h>
+#include <linux/acpi_pmtmr.h>
+
+#include <asm/hpet.h>
unsigned int cpu_khz; /* TSC clocks / usec, not used here */
EXPORT_SYMBOL(cpu_khz);
@@ -84,3 +88,130 @@
#endif
__setup("notsc", notsc_setup);
+
+#define MAX_RETRIES 5
+#define SMI_TRESHOLD 50000
+
+/*
+ * Read TSC and the reference counters. Take care of SMI disturbance
+ */
+static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+{
+ u64 t1, t2;
+ int i;
+
+ for (i = 0; i < MAX_RETRIES; i++) {
+ t1 = get_cycles();
+ if (hpet)
+ *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+ else
+ *pm = acpi_pm_read_early();
+ t2 = get_cycles();
+ if ((t2 - t1) < SMI_TRESHOLD)
+ return t2;
+ }
+ return ULLONG_MAX;
+}
+
+/**
+ * tsc_calibrate - calibrate the tsc on boot
+ */
+static unsigned int __init tsc_calibrate(void)
+{
+ unsigned long flags;
+ u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
+ int hpet = is_hpet_enabled();
+ unsigned int tsc_khz_val = 0;
+
+ local_irq_save(flags);
+
+ tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ outb(0xb0, 0x43);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+ tr1 = get_cycles();
+ while ((inb(0x61) & 0x20) == 0);
+ tr2 = get_cycles();
+
+ tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+
+ local_irq_restore(flags);
+
+ /*
+ * Preset the result with the raw and inaccurate PIT
+ * calibration value
+ */
+ delta = (tr2 - tr1);
+ do_div(delta, 50);
+ tsc_khz_val = delta;
+
+ /* hpet or pmtimer available ? */
+ if (!hpet && !pm1 && !pm2) {
+ printk(KERN_INFO "TSC calibrated against PIT\n");
+ goto out;
+ }
+
+ /* Check, whether the sampling was disturbed by an SMI */
+ if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
+ printk(KERN_WARNING "TSC calibration disturbed by SMI, "
+ "using PIT calibration result\n");
+ goto out;
+ }
+
+ tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+ if (hpet) {
+ printk(KERN_INFO "TSC calibrated against HPET\n");
+ if (hpet2 < hpet1)
+ hpet2 += 0x100000000ULL;
+ hpet2 -= hpet1;
+ tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+ do_div(tsc1, 1000000);
+ } else {
+ printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
+ if (pm2 < pm1)
+ pm2 += (u64)ACPI_PM_OVRRUN;
+ pm2 -= pm1;
+ tsc1 = pm2 * 1000000000LL;
+ do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ }
+
+ do_div(tsc2, tsc1);
+ tsc_khz_val = tsc2;
+
+out:
+ return tsc_khz_val;
+}
+
+unsigned long native_calculate_cpu_khz(void)
+{
+ return tsc_calibrate();
+}
+
+#ifdef CONFIG_X86_32
+/* Only called from the Powernow K7 cpu freq driver */
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+ unsigned long cpu_khz_old = cpu_khz;
+
+ if (cpu_has_tsc) {
+ cpu_khz = calculate_cpu_khz();
+ tsc_khz = cpu_khz;
+ cpu_data(0).loops_per_jiffy =
+ cpufreq_scale(cpu_data(0).loops_per_jiffy,
+ cpu_khz_old, cpu_khz);
+ return 0;
+ } else
+ return -ENODEV;
+#else
+ return -ENODEV;
+#endif
+}
+
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
+#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index dc89900..40c0aaf 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -42,7 +42,7 @@
DEFINE_PER_CPU(unsigned long, cyc2ns);
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
{
unsigned long long tsc_now, ns_now;
unsigned long flags, *scale;
@@ -65,78 +65,6 @@
local_irq_restore(flags);
}
-unsigned long native_calculate_cpu_khz(void)
-{
- unsigned long long start, end;
- unsigned long count;
- u64 delta64 = (u64)ULLONG_MAX;
- int i;
- unsigned long flags;
-
- local_irq_save(flags);
-
- /* run 3 times to ensure the cache is warm and to get an accurate reading */
- for (i = 0; i < 3; i++) {
- mach_prepare_counter();
- rdtscll(start);
- mach_countup(&count);
- rdtscll(end);
-
- /*
- * Error: ECTCNEVERSET
- * The CTC wasn't reliable: we got a hit on the very first read,
- * or the CPU was so fast/slow that the quotient wouldn't fit in
- * 32 bits..
- */
- if (count <= 1)
- continue;
-
- /* cpu freq too slow: */
- if ((end - start) <= CALIBRATE_TIME_MSEC)
- continue;
-
- /*
- * We want the minimum time of all runs in case one of them
- * is inaccurate due to SMI or other delay
- */
- delta64 = min(delta64, (end - start));
- }
-
- /* cpu freq too fast (or every run was bad): */
- if (delta64 > (1ULL<<32))
- goto err;
-
- delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
- do_div(delta64,CALIBRATE_TIME_MSEC);
-
- local_irq_restore(flags);
- return (unsigned long)delta64;
-err:
- local_irq_restore(flags);
- return 0;
-}
-
-int recalibrate_cpu_khz(void)
-{
-#ifndef CONFIG_SMP
- unsigned long cpu_khz_old = cpu_khz;
-
- if (cpu_has_tsc) {
- cpu_khz = calculate_cpu_khz();
- tsc_khz = cpu_khz;
- cpu_data(0).loops_per_jiffy =
- cpufreq_scale(cpu_data(0).loops_per_jiffy,
- cpu_khz_old, cpu_khz);
- return 0;
- } else
- return -ENODEV;
-#else
- return -ENODEV;
-#endif
-}
-
-EXPORT_SYMBOL(recalibrate_cpu_khz);
-
#ifdef CONFIG_CPU_FREQ
/*
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 69cbe4c..c852ff9 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -40,7 +40,7 @@
DEFINE_PER_CPU(unsigned long, cyc2ns);
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
{
unsigned long long tsc_now, ns_now;
unsigned long flags, *scale;
@@ -130,98 +130,6 @@
#endif
-#define MAX_RETRIES 5
-#define SMI_TRESHOLD 50000
-
-/*
- * Read TSC and the reference counters. Take care of SMI disturbance
- */
-static unsigned long __init tsc_read_refs(unsigned long *pm,
- unsigned long *hpet)
-{
- unsigned long t1, t2;
- int i;
-
- for (i = 0; i < MAX_RETRIES; i++) {
- t1 = get_cycles();
- if (hpet)
- *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
- else
- *pm = acpi_pm_read_early();
- t2 = get_cycles();
- if ((t2 - t1) < SMI_TRESHOLD)
- return t2;
- }
- return ULONG_MAX;
-}
-
-/**
- * tsc_calibrate - calibrate the tsc on boot
- */
-void __init tsc_calibrate(void)
-{
- unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2;
- int hpet = is_hpet_enabled(), cpu;
-
- local_irq_save(flags);
-
- tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- outb(0xb0, 0x43);
- outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
- outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
- tr1 = get_cycles();
- while ((inb(0x61) & 0x20) == 0);
- tr2 = get_cycles();
-
- tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
- local_irq_restore(flags);
-
- /*
- * Preset the result with the raw and inaccurate PIT
- * calibration value
- */
- tsc_khz = (tr2 - tr1) / 50;
-
- /* hpet or pmtimer available ? */
- if (!hpet && !pm1 && !pm2) {
- printk(KERN_INFO "TSC calibrated against PIT\n");
- goto out;
- }
-
- /* Check, whether the sampling was disturbed by an SMI */
- if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
- printk(KERN_WARNING "TSC calibration disturbed by SMI, "
- "using PIT calibration result\n");
- goto out;
- }
-
- tsc2 = (tsc2 - tsc1) * 1000000L;
-
- if (hpet) {
- printk(KERN_INFO "TSC calibrated against HPET\n");
- if (hpet2 < hpet1)
- hpet2 += 0x100000000UL;
- hpet2 -= hpet1;
- tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000;
- } else {
- printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
- if (pm2 < pm1)
- pm2 += ACPI_PM_OVRRUN;
- pm2 -= pm1;
- tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC;
- }
-
- tsc_khz = tsc2 / tsc1;
-
-out:
- for_each_possible_cpu(cpu)
- set_cyc2ns_scale(tsc_khz, cpu);
-}
-
/*
* Make an educated guess if the TSC is trustworthy and synchronized
* over all CPUs.
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
index 6a9b4ac..82f1ac6 100644
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -86,8 +86,8 @@
#else /* CONFIG_HPET_TIMER */
static inline int hpet_enable(void) { return 0; }
-static inline unsigned long hpet_readl(unsigned long a) { return 0; }
static inline int is_hpet_enabled(void) { return 0; }
+#define hpet_readl(a) 0
#endif
#endif /* ASM_X86_HPET_H */
diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h
index 548873a..761054d 100644
--- a/include/asm-x86/tsc.h
+++ b/include/asm-x86/tsc.h
@@ -58,7 +58,6 @@
extern void check_tsc_sync_source(int cpu);
extern void check_tsc_sync_target(void);
-extern void tsc_calibrate(void);
extern int notsc_setup(char *);
#endif