[SPARC64]: Serial Console for E250 Patch
From: Eddie C. Dost <ecd@brainaid.de>
I have the following patch for serial console over the RSC
(remote system controller) on my E250 machine. It basically adds
support for input-device=rsc and output-device=rsc from OBP, and
allows 115200,8,n,1,- serial mode setting.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index 5fc4a62..fa4ae94 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -34,6 +34,7 @@
char *mode_prop = "ttyX-mode";
char *cd_prop = "ttyX-ignore-cd";
char *dtr_prop = "ttyX-rts-dtr-off";
+ char *ssp_console_modes_prop = "ssp-console-modes";
int baud, bits, stop, cflag;
char parity;
int carrier = 0;
@@ -43,14 +44,39 @@
if (!serial_console)
return;
- if (serial_console == 1) {
+ switch (serial_console) {
+ case PROMDEV_OTTYA:
mode_prop[3] = 'a';
cd_prop[3] = 'a';
dtr_prop[3] = 'a';
- } else {
+ break;
+
+ case PROMDEV_OTTYB:
mode_prop[3] = 'b';
cd_prop[3] = 'b';
dtr_prop[3] = 'b';
+ break;
+
+ case PROMDEV_ORSC:
+
+ nd = prom_pathtoinode("rsc");
+ if (!nd) {
+ strcpy(mode, "115200,8,n,1,-");
+ goto no_options;
+ }
+
+ if (!prom_node_has_property(nd, ssp_console_modes_prop)) {
+ strcpy(mode, "115200,8,n,1,-");
+ goto no_options;
+ }
+
+ memset(mode, 0, sizeof(mode));
+ prom_getstring(nd, ssp_console_modes_prop, mode, sizeof(mode));
+ goto no_options;
+
+ default:
+ strcpy(mode, "9600,8,n,1,-");
+ goto no_options;
}
topnd = prom_getchild(prom_root_node);
@@ -110,6 +136,10 @@
case 9600: cflag |= B9600; break;
case 19200: cflag |= B19200; break;
case 38400: cflag |= B38400; break;
+ case 57600: cflag |= B57600; break;
+ case 115200: cflag |= B115200; break;
+ case 230400: cflag |= B230400; break;
+ case 460800: cflag |= B460800; break;
default: baud = 9600; cflag |= B9600; break;
}
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 7e773ff..8bcaebc 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -897,9 +897,6 @@
sunserial_console_termios(con);
- /* Firmware console speed is limited to 150-->38400 baud so
- * this hackish cflag thing is OK.
- */
switch (con->cflag & CBAUD) {
case B150: baud = 150; break;
case B300: baud = 300; break;
@@ -910,6 +907,10 @@
default: case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
+ case B57600: baud = 57600; break;
+ case B115200: baud = 115200; break;
+ case B230400: baud = 230400; break;
+ case B460800: baud = 460800; break;
};
/*