drivers/net/chelsio: Use pr_<level>, netif_msg_<type>
Convert CH_<level> and CH_DBG uses to pr_<level> and netif equivalents
Remove CH_<level> and CH_DBG macro definitions
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 2402d37..53bde15 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -90,7 +90,7 @@
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
TPI_ATTEMPTS, 3);
if (tpi_busy)
- CH_ALERT("%s: TPI write to 0x%x failed\n",
+ pr_alert("%s: TPI write to 0x%x failed\n",
adapter->name, addr);
return tpi_busy;
}
@@ -118,7 +118,7 @@
tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
TPI_ATTEMPTS, 3);
if (tpi_busy)
- CH_ALERT("%s: TPI read from 0x%x failed\n",
+ pr_alert("%s: TPI read from 0x%x failed\n",
adapter->name, addr);
else
*valp = readl(adapter->regs + A_TPI_RD_DATA);
@@ -262,7 +262,7 @@
udelay(10);
} while (busy && --attempts);
if (busy)
- CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
+ pr_alert("%s: MDIO operation timed out\n", adapter->name);
return busy;
}
@@ -581,7 +581,7 @@
} while (!(val & F_VPD_OP_FLAG) && --i);
if (!(val & F_VPD_OP_FLAG)) {
- CH_ERR("%s: reading EEPROM address 0x%x failed\n",
+ pr_err("%s: reading EEPROM address 0x%x failed\n",
adapter->name, addr);
return -EIO;
}
@@ -734,8 +734,9 @@
break;
case CHBT_BOARD_8000:
case CHBT_BOARD_CHT110:
- CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
- cause);
+ if (netif_msg_intr(adapter))
+ dev_dbg(&adapter->pdev->dev,
+ "External interrupt cause 0x%x\n", cause);
if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
struct cmac *mac = adapter->port[0].mac;
@@ -746,8 +747,9 @@
t1_tpi_read(adapter,
A_ELMER0_GPI_STAT, &mod_detect);
- CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
- mod_detect ? "removed" : "inserted");
+ if (netif_msg_link(adapter))
+ dev_info(&adapter->pdev->dev, "XPAK %s\n",
+ mod_detect ? "removed" : "inserted");
}
break;
#ifdef CONFIG_CHELSIO_T1_COUGAR
@@ -1084,7 +1086,7 @@
#ifdef CONFIG_CHELSIO_T1_COUGAR
if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) {
- CH_ERR("%s: CSPI initialization failed\n",
+ pr_err("%s: CSPI initialization failed\n",
adapter->name);
goto error;
}
@@ -1105,20 +1107,20 @@
adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
if (!adapter->sge) {
- CH_ERR("%s: SGE initialization failed\n",
+ pr_err("%s: SGE initialization failed\n",
adapter->name);
goto error;
}
if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
- CH_ERR("%s: ESPI initialization failed\n",
+ pr_err("%s: ESPI initialization failed\n",
adapter->name);
goto error;
}
adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
if (!adapter->tp) {
- CH_ERR("%s: TP initialization failed\n",
+ pr_err("%s: TP initialization failed\n",
adapter->name);
goto error;
}
@@ -1138,14 +1140,14 @@
adapter->port[i].phy = bi->gphy->create(adapter->port[i].dev,
phy_addr, bi->mdio_ops);
if (!adapter->port[i].phy) {
- CH_ERR("%s: PHY %d initialization failed\n",
+ pr_err("%s: PHY %d initialization failed\n",
adapter->name, i);
goto error;
}
adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
if (!mac) {
- CH_ERR("%s: MAC %d initialization failed\n",
+ pr_err("%s: MAC %d initialization failed\n",
adapter->name, i);
goto error;
}
@@ -1157,7 +1159,7 @@
if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
mac->ops->macaddress_get(mac, hw_addr);
else if (vpd_macaddress_get(adapter, i, hw_addr)) {
- CH_ERR("%s: could not read MAC address from VPD ROM\n",
+ pr_err("%s: could not read MAC address from VPD ROM\n",
adapter->port[i].dev->name);
goto error;
}