diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index c44e4ab..9ebcea3 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -113,6 +113,7 @@
 	 .global_intr_mask = 0x00034,
 	 .ioa_host_intr = 0x0009C,
 	 .ioa_host_intr_clr = 0x000A0,
+	 .ioa_host_msix_intr = 0x7FC40,
 	 .ioa_host_mask = 0x7FC28,
 	 .ioa_host_mask_clr = 0x7FC28,
 	 .host_ioa_intr = 0x00020,
@@ -154,8 +155,12 @@
 	u8 target, bus, lun;
 	unsigned long lock_flags;
 	int rc = -ENXIO;
+	u16 fw_version;
+
 	pinstance = shost_priv(scsi_dev->host);
 
+	fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
+
 	/* Driver exposes VSET and GSCSI resources only; all other device types
 	 * are not exposed. Resource list is synchronized using resource lock
 	 * so any traversal or modifications to the list should be done inside
@@ -166,7 +171,11 @@
 
 		/* do not expose VSETs with order-ids > MAX_VSET_TARGETS */
 		if (RES_IS_VSET(temp->cfg_entry)) {
-			target = temp->cfg_entry.unique_flags1;
+			if (fw_version <= PMCRAID_FW_VERSION_1)
+				target = temp->cfg_entry.unique_flags1;
+			else
+				target = temp->cfg_entry.array_id & 0xFF;
+
 			if (target > PMCRAID_MAX_VSET_TARGETS)
 				continue;
 			bus = PMCRAID_VSET_BUS_ID;
@@ -283,7 +292,7 @@
  * @reason: calling context
  *
  * Return value
- * 	actual depth set
+ *	actual depth set
  */
 static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth,
 				      int reason)
@@ -305,7 +314,7 @@
  * @tag: type of tags to use
  *
  * Return value:
- * 	actual queue type set
+ *	actual queue type set
  */
 static int pmcraid_change_queue_type(struct scsi_device *scsi_dev, int tag)
 {
@@ -357,6 +366,7 @@
 		 * processed by IOA
 		 */
 		memset(&cmd->ioa_cb->ioarcb.cdb, 0, PMCRAID_MAX_CDB_LEN);
+		ioarcb->hrrq_id = 0;
 		ioarcb->request_flags0 = 0;
 		ioarcb->request_flags1 = 0;
 		ioarcb->cmd_timeout = 0;
@@ -368,13 +378,15 @@
 		ioarcb->add_cmd_param_offset = 0;
 		cmd->ioa_cb->ioasa.ioasc = 0;
 		cmd->ioa_cb->ioasa.residual_data_length = 0;
-		cmd->u.time_left = 0;
+		cmd->time_left = 0;
 	}
 
 	cmd->cmd_done = NULL;
 	cmd->scsi_cmd = NULL;
 	cmd->release = 0;
 	cmd->completion_req = 0;
+	cmd->sense_buffer = 0;
+	cmd->sense_buffer_dma = 0;
 	cmd->dma_handle = 0;
 	init_timer(&cmd->timer);
 }
@@ -449,7 +461,9 @@
  */
 static u32 pmcraid_read_interrupts(struct pmcraid_instance *pinstance)
 {
-	return ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
+	return (pinstance->interrupt_mode) ?
+		ioread32(pinstance->int_regs.ioa_host_msix_interrupt_reg) :
+		ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
 }
 
 /**
@@ -469,10 +483,15 @@
 	u32 gmask = ioread32(pinstance->int_regs.global_interrupt_mask_reg);
 	u32 nmask = gmask | GLOBAL_INTERRUPT_MASK;
 
-	iowrite32(nmask, pinstance->int_regs.global_interrupt_mask_reg);
 	iowrite32(intrs, pinstance->int_regs.ioa_host_interrupt_clr_reg);
-	iowrite32(intrs, pinstance->int_regs.ioa_host_interrupt_mask_reg);
-	ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
+	iowrite32(nmask, pinstance->int_regs.global_interrupt_mask_reg);
+	ioread32(pinstance->int_regs.global_interrupt_mask_reg);
+
+	if (!pinstance->interrupt_mode) {
+		iowrite32(intrs,
+			pinstance->int_regs.ioa_host_interrupt_mask_reg);
+		ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
+	}
 }
 
 /**
@@ -493,8 +512,12 @@
 	u32 nmask = gmask & (~GLOBAL_INTERRUPT_MASK);
 
 	iowrite32(nmask, pinstance->int_regs.global_interrupt_mask_reg);
-	iowrite32(~intrs, pinstance->int_regs.ioa_host_interrupt_mask_reg);
-	ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
+
+	if (!pinstance->interrupt_mode) {
+		iowrite32(~intrs,
+			 pinstance->int_regs.ioa_host_interrupt_mask_reg);
+		ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
+	}
 
 	pmcraid_info("enabled interrupts global mask = %x intr_mask = %x\n",
 		ioread32(pinstance->int_regs.global_interrupt_mask_reg),
@@ -502,6 +525,39 @@
 }
 
 /**
+ * pmcraid_clr_trans_op - clear trans to op interrupt
+ *
+ * @pinstance: pointer to per adapter instance structure
+ *
+ * Return Value
+ *	 None
+ */
+static void pmcraid_clr_trans_op(
+	struct pmcraid_instance *pinstance
+)
+{
+	unsigned long lock_flags;
+
+	if (!pinstance->interrupt_mode) {
+		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
+			pinstance->int_regs.ioa_host_interrupt_mask_reg);
+		ioread32(pinstance->int_regs.ioa_host_interrupt_mask_reg);
+		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
+			pinstance->int_regs.ioa_host_interrupt_clr_reg);
+		ioread32(pinstance->int_regs.ioa_host_interrupt_clr_reg);
+	}
+
+	if (pinstance->reset_cmd != NULL) {
+		del_timer(&pinstance->reset_cmd->timer);
+		spin_lock_irqsave(
+			pinstance->host->host_lock, lock_flags);
+		pinstance->reset_cmd->cmd_done(pinstance->reset_cmd);
+		spin_unlock_irqrestore(
+			pinstance->host->host_lock, lock_flags);
+	}
+}
+
+/**
  * pmcraid_reset_type - Determine the required reset type
  * @pinstance: pointer to adapter instance structure
  *
@@ -536,7 +592,7 @@
  * pmcraid_bist_done - completion function for PCI BIST
  * @cmd: pointer to reset command
  * Return Value
- * 	none
+ *	none
  */
 
 static void pmcraid_ioa_reset(struct pmcraid_cmd *);
@@ -552,16 +608,16 @@
 
 	/* If PCI config space can't be accessed wait for another two secs */
 	if ((rc != PCIBIOS_SUCCESSFUL || (!(pci_reg & PCI_COMMAND_MEMORY))) &&
-	    cmd->u.time_left > 0) {
+	    cmd->time_left > 0) {
 		pmcraid_info("BIST not complete, waiting another 2 secs\n");
-		cmd->timer.expires = jiffies + cmd->u.time_left;
-		cmd->u.time_left = 0;
+		cmd->timer.expires = jiffies + cmd->time_left;
+		cmd->time_left = 0;
 		cmd->timer.data = (unsigned long)cmd;
 		cmd->timer.function =
 			(void (*)(unsigned long))pmcraid_bist_done;
 		add_timer(&cmd->timer);
 	} else {
-		cmd->u.time_left = 0;
+		cmd->time_left = 0;
 		pmcraid_info("BIST is complete, proceeding with reset\n");
 		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 		pmcraid_ioa_reset(cmd);
@@ -585,10 +641,10 @@
 		pinstance->int_regs.host_ioa_interrupt_reg);
 	doorbells = ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
 	intrs = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
-	pmcraid_info("doorbells after start bist: %x intrs: %x \n",
+	pmcraid_info("doorbells after start bist: %x intrs: %x\n",
 		      doorbells, intrs);
 
-	cmd->u.time_left = msecs_to_jiffies(PMCRAID_BIST_TIMEOUT);
+	cmd->time_left = msecs_to_jiffies(PMCRAID_BIST_TIMEOUT);
 	cmd->timer.data = (unsigned long)cmd;
 	cmd->timer.expires = jiffies + msecs_to_jiffies(PMCRAID_BIST_TIMEOUT);
 	cmd->timer.function = (void (*)(unsigned long))pmcraid_bist_done;
@@ -612,7 +668,7 @@
 	 * some more time to wait, restart the timer
 	 */
 	if (((status & INTRS_CRITICAL_OP_IN_PROGRESS) == 0) ||
-	    cmd->u.time_left <= 0) {
+	    cmd->time_left <= 0) {
 		pmcraid_info("critical op is reset proceeding with reset\n");
 		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 		pmcraid_ioa_reset(cmd);
@@ -620,7 +676,7 @@
 	} else {
 		pmcraid_info("critical op is not yet reset waiting again\n");
 		/* restart timer if some more time is available to wait */
-		cmd->u.time_left -= PMCRAID_CHECK_FOR_RESET_TIMEOUT;
+		cmd->time_left -= PMCRAID_CHECK_FOR_RESET_TIMEOUT;
 		cmd->timer.data = (unsigned long)cmd;
 		cmd->timer.expires = jiffies + PMCRAID_CHECK_FOR_RESET_TIMEOUT;
 		cmd->timer.function =
@@ -638,6 +694,7 @@
  *	successfully written to IOA. Returns non-zero in case pci_config_space
  *	is not accessible
  */
+static void pmcraid_notify_ioastate(struct pmcraid_instance *, u32);
 static void pmcraid_reset_alert(struct pmcraid_cmd *cmd)
 {
 	struct pmcraid_instance *pinstance = cmd->drv_inst;
@@ -658,7 +715,7 @@
 		 * OPERATION bit is reset. A timer is started to wait for this
 		 * bit to be reset.
 		 */
-		cmd->u.time_left = PMCRAID_RESET_TIMEOUT;
+		cmd->time_left = PMCRAID_RESET_TIMEOUT;
 		cmd->timer.data = (unsigned long)cmd;
 		cmd->timer.expires = jiffies + PMCRAID_CHECK_FOR_RESET_TIMEOUT;
 		cmd->timer.function =
@@ -693,7 +750,8 @@
 	unsigned long lock_flags;
 
 	dev_info(&pinstance->pdev->dev,
-		"Adapter being reset due to command timeout.\n");
+		"Adapter being reset due to cmd(CDB[0] = %x) timeout\n",
+		cmd->ioa_cb->ioarcb.cdb[0]);
 
 	/* Command timeouts result in hard reset sequence. The command that got
 	 * timed out may be the one used as part of reset sequence. In this
@@ -736,9 +794,14 @@
 		 */
 		if (cmd == pinstance->reset_cmd)
 			cmd->cmd_done = pmcraid_ioa_reset;
-
 	}
 
+	/* Notify apps of important IOA bringup/bringdown sequences */
+	if (pinstance->scn.ioa_state != PMC_DEVICE_EVENT_RESET_START &&
+	    pinstance->scn.ioa_state != PMC_DEVICE_EVENT_SHUTDOWN_START)
+		pmcraid_notify_ioastate(pinstance,
+					PMC_DEVICE_EVENT_RESET_START);
+
 	pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
 	scsi_block_requests(pinstance->host);
 	pmcraid_reset_alert(cmd);
@@ -866,7 +929,7 @@
 	/* Add this command block to pending cmd pool. We do this prior to
 	 * writting IOARCB to ioarrin because IOA might complete the command
 	 * by the time we are about to add it to the list. Response handler
-	 * (isr/tasklet) looks for cmb block in the pending pending list.
+	 * (isr/tasklet) looks for cmd block in the pending pending list.
 	 */
 	spin_lock_irqsave(&pinstance->pending_pool_lock, lock_flags);
 	list_add_tail(&cmd->free_list, &pinstance->pending_cmd_pool);
@@ -916,6 +979,23 @@
 }
 
 /**
+ * pmcraid_ioa_shutdown_done - completion function for IOA shutdown command
+ * @cmd: pointer to the command block used for sending IOA shutdown command
+ *
+ * Return value
+ *  None
+ */
+static void pmcraid_ioa_shutdown_done(struct pmcraid_cmd *cmd)
+{
+	struct pmcraid_instance *pinstance = cmd->drv_inst;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
+	pmcraid_ioa_reset(cmd);
+	spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
+}
+
+/**
  * pmcraid_ioa_shutdown - sends SHUTDOWN command to ioa
  *
  * @cmd: pointer to the command block used as part of reset sequence
@@ -943,30 +1023,112 @@
 	pmcraid_info("firing normal shutdown command (%d) to IOA\n",
 		     le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle));
 
-	pmcraid_send_cmd(cmd, pmcraid_ioa_reset,
+	pmcraid_notify_ioastate(cmd->drv_inst, PMC_DEVICE_EVENT_SHUTDOWN_START);
+
+	pmcraid_send_cmd(cmd, pmcraid_ioa_shutdown_done,
 			 PMCRAID_SHUTDOWN_TIMEOUT,
 			 pmcraid_timeout_handler);
 }
 
 /**
+ * pmcraid_get_fwversion_done - completion function for get_fwversion
+ *
+ * @cmd: pointer to command block used to send INQUIRY command
+ *
+ * Return Value
+ *	none
+ */
+static void pmcraid_querycfg(struct pmcraid_cmd *);
+
+static void pmcraid_get_fwversion_done(struct pmcraid_cmd *cmd)
+{
+	struct pmcraid_instance *pinstance = cmd->drv_inst;
+	u32 ioasc = le32_to_cpu(cmd->ioa_cb->ioasa.ioasc);
+	unsigned long lock_flags;
+
+	/* configuration table entry size depends on firmware version. If fw
+	 * version is not known, it is not possible to interpret IOA config
+	 * table
+	 */
+	if (ioasc) {
+		pmcraid_err("IOA Inquiry failed with %x\n", ioasc);
+		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
+		pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
+		pmcraid_reset_alert(cmd);
+		spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
+	} else  {
+		pmcraid_querycfg(cmd);
+	}
+}
+
+/**
+ * pmcraid_get_fwversion - reads firmware version information
+ *
+ * @cmd: pointer to command block used to send INQUIRY command
+ *
+ * Return Value
+ *	none
+ */
+static void pmcraid_get_fwversion(struct pmcraid_cmd *cmd)
+{
+	struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
+	struct pmcraid_ioadl_desc *ioadl = ioarcb->add_data.u.ioadl;
+	struct pmcraid_instance *pinstance = cmd->drv_inst;
+	u16 data_size = sizeof(struct pmcraid_inquiry_data);
+
+	pmcraid_reinit_cmdblk(cmd);
+	ioarcb->request_type = REQ_TYPE_SCSI;
+	ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
+	ioarcb->cdb[0] = INQUIRY;
+	ioarcb->cdb[1] = 1;
+	ioarcb->cdb[2] = 0xD0;
+	ioarcb->cdb[3] = (data_size >> 8) & 0xFF;
+	ioarcb->cdb[4] = data_size & 0xFF;
+
+	/* Since entire inquiry data it can be part of IOARCB itself
+	 */
+	ioarcb->ioadl_bus_addr = cpu_to_le64((cmd->ioa_cb_bus_addr) +
+					offsetof(struct pmcraid_ioarcb,
+						add_data.u.ioadl[0]));
+	ioarcb->ioadl_length = cpu_to_le32(sizeof(struct pmcraid_ioadl_desc));
+	ioarcb->ioarcb_bus_addr &= ~(0x1FULL);
+
+	ioarcb->request_flags0 |= NO_LINK_DESCS;
+	ioarcb->data_transfer_length = cpu_to_le32(data_size);
+	ioadl = &(ioarcb->add_data.u.ioadl[0]);
+	ioadl->flags = IOADL_FLAGS_LAST_DESC;
+	ioadl->address = cpu_to_le64(pinstance->inq_data_baddr);
+	ioadl->data_len = cpu_to_le32(data_size);
+
+	pmcraid_send_cmd(cmd, pmcraid_get_fwversion_done,
+			 PMCRAID_INTERNAL_TIMEOUT, pmcraid_timeout_handler);
+}
+
+/**
  * pmcraid_identify_hrrq - registers host rrq buffers with IOA
  * @cmd: pointer to command block to be used for identify hrrq
  *
  * Return Value
- *	 0 in case of success, otherwise non-zero failure code
+ *	 none
  */
-
-static void pmcraid_querycfg(struct pmcraid_cmd *);
-
 static void pmcraid_identify_hrrq(struct pmcraid_cmd *cmd)
 {
 	struct pmcraid_instance *pinstance = cmd->drv_inst;
 	struct pmcraid_ioarcb *ioarcb = &cmd->ioa_cb->ioarcb;
-	int index = 0;
+	int index = cmd->hrrq_index;
 	__be64 hrrq_addr = cpu_to_be64(pinstance->hrrq_start_bus_addr[index]);
 	u32 hrrq_size = cpu_to_be32(sizeof(u32) * PMCRAID_MAX_CMD);
+	void (*done_function)(struct pmcraid_cmd *);
 
 	pmcraid_reinit_cmdblk(cmd);
+	cmd->hrrq_index = index + 1;
+
+	if (cmd->hrrq_index < pinstance->num_hrrq) {
+		done_function = pmcraid_identify_hrrq;
+	} else {
+		cmd->hrrq_index = 0;
+		done_function = pmcraid_get_fwversion;
+	}
 
 	/* Initialize ioarcb */
 	ioarcb->request_type = REQ_TYPE_IOACMD;
@@ -980,8 +1142,8 @@
 	/* IOA expects 64-bit pci address to be written in B.E format
 	 * (i.e cdb[2]=MSByte..cdb[9]=LSB.
 	 */
-	pmcraid_info("HRRQ_IDENTIFY with hrrq:ioarcb => %llx:%llx\n",
-		     hrrq_addr, ioarcb->ioarcb_bus_addr);
+	pmcraid_info("HRRQ_IDENTIFY with hrrq:ioarcb:index => %llx:%llx:%x\n",
+		     hrrq_addr, ioarcb->ioarcb_bus_addr, index);
 
 	memcpy(&(ioarcb->cdb[2]), &hrrq_addr, sizeof(hrrq_addr));
 	memcpy(&(ioarcb->cdb[10]), &hrrq_size, sizeof(hrrq_size));
@@ -990,7 +1152,7 @@
 	 * Note that this gets called even during reset from SCSI mid-layer
 	 * or tasklet
 	 */
-	pmcraid_send_cmd(cmd, pmcraid_querycfg,
+	pmcraid_send_cmd(cmd, done_function,
 			 PMCRAID_INTERNAL_TIMEOUT,
 			 pmcraid_timeout_handler);
 }
@@ -1047,7 +1209,7 @@
 	}
 
 	if (type == PMCRAID_HCAM_CODE_CONFIG_CHANGE) {
-		rcb_size = sizeof(struct pmcraid_hcam_ccn);
+		rcb_size = sizeof(struct pmcraid_hcam_ccn_ext);
 		cmd_done = pmcraid_process_ccn;
 		dma = pinstance->ccn.baddr + PMCRAID_AEN_HDR_SIZE;
 		hcam = &pinstance->ccn;
@@ -1094,7 +1256,7 @@
  * This function will send a Host Controlled Async command to IOA.
  *
  * Return value:
- * 	none
+ *	none
  */
 static void pmcraid_send_hcam(struct pmcraid_instance *pinstance, u8 type)
 {
@@ -1202,18 +1364,25 @@
 /**
  * pmcraid_expose_resource - check if the resource can be exposed to OS
  *
+ * @fw_version: firmware version code
  * @cfgte: pointer to configuration table entry of the resource
  *
  * Return value:
- * 	true if resource can be added to midlayer, false(0) otherwise
+ *	true if resource can be added to midlayer, false(0) otherwise
  */
-static int pmcraid_expose_resource(struct pmcraid_config_table_entry *cfgte)
+static int pmcraid_expose_resource(u16 fw_version,
+				   struct pmcraid_config_table_entry *cfgte)
 {
 	int retval = 0;
 
-	if (cfgte->resource_type == RES_TYPE_VSET)
-		retval = ((cfgte->unique_flags1 & 0x80) == 0);
-	else if (cfgte->resource_type == RES_TYPE_GSCSI)
+	if (cfgte->resource_type == RES_TYPE_VSET) {
+		if (fw_version <= PMCRAID_FW_VERSION_1)
+			retval = ((cfgte->unique_flags1 & 0x80) == 0);
+		else
+			retval = ((cfgte->unique_flags0 & 0x80) == 0 &&
+				  (cfgte->unique_flags1 & 0x80) == 0);
+
+	} else if (cfgte->resource_type == RES_TYPE_GSCSI)
 		retval = (RES_BUS(cfgte->resource_address) !=
 				PMCRAID_VIRTUAL_ENCL_BUS_ID);
 	return retval;
@@ -1246,8 +1415,8 @@
  * pmcraid_netlink_init - registers pmcraid_event_family
  *
  * Return value:
- * 	0 if the pmcraid_event_family is successfully registered
- * 	with netlink generic, non-zero otherwise
+ *	0 if the pmcraid_event_family is successfully registered
+ *	with netlink generic, non-zero otherwise
  */
 static int pmcraid_netlink_init(void)
 {
@@ -1268,7 +1437,7 @@
  * pmcraid_netlink_release - unregisters pmcraid_event_family
  *
  * Return value:
- * 	none
+ *	none
  */
 static void pmcraid_netlink_release(void)
 {
@@ -1283,31 +1452,30 @@
  * Return value:
  *	0 if success, error value in case of any failure.
  */
-static int pmcraid_notify_aen(struct pmcraid_instance *pinstance, u8 type)
+static int pmcraid_notify_aen(
+	struct pmcraid_instance *pinstance,
+	struct pmcraid_aen_msg  *aen_msg,
+	u32    data_size
+)
 {
 	struct sk_buff *skb;
-	struct pmcraid_aen_msg *aen_msg;
 	void *msg_header;
-	int data_size, total_size;
+	u32  total_size, nla_genl_hdr_total_size;
 	int result;
 
-
-	if (type == PMCRAID_HCAM_CODE_LOG_DATA) {
-		aen_msg = pinstance->ldn.msg;
-		data_size = pinstance->ldn.hcam->data_len;
-	} else {
-		aen_msg = pinstance->ccn.msg;
-		data_size = pinstance->ccn.hcam->data_len;
-	}
-
-	data_size += sizeof(struct pmcraid_hcam_hdr);
 	aen_msg->hostno = (pinstance->host->unique_id << 16 |
 			   MINOR(pinstance->cdev.dev));
 	aen_msg->length = data_size;
+
 	data_size += sizeof(*aen_msg);
 
 	total_size = nla_total_size(data_size);
-	skb = genlmsg_new(total_size, GFP_ATOMIC);
+	/* Add GENL_HDR to total_size */
+	nla_genl_hdr_total_size =
+		(total_size + (GENL_HDRLEN +
+		((struct genl_family *)&pmcraid_event_family)->hdrsize)
+		 + NLMSG_HDRLEN);
+	skb = genlmsg_new(nla_genl_hdr_total_size, GFP_ATOMIC);
 
 
 	if (!skb) {
@@ -1329,7 +1497,7 @@
 	result = nla_put(skb, PMCRAID_AEN_ATTR_EVENT, data_size, aen_msg);
 
 	if (result) {
-		pmcraid_err("failed to copy AEN attribute data \n");
+		pmcraid_err("failed to copy AEN attribute data\n");
 		nlmsg_free(skb);
 		return -EINVAL;
 	}
@@ -1350,13 +1518,57 @@
 	 * value.
 	 */
 	if (result)
-		pmcraid_info("failed to send %s event message %x!\n",
-			type == PMCRAID_HCAM_CODE_LOG_DATA ? "LDN" : "CCN",
-			result);
+		pmcraid_info("error (%x) sending aen event message\n", result);
 	return result;
 }
 
 /**
+ * pmcraid_notify_ccn - notifies about CCN event msg to user space
+ * @pinstance: pointer adapter instance structure
+ *
+ * Return value:
+ *	0 if success, error value in case of any failure
+ */
+static int pmcraid_notify_ccn(struct pmcraid_instance *pinstance)
+{
+	return pmcraid_notify_aen(pinstance,
+				pinstance->ccn.msg,
+				pinstance->ccn.hcam->data_len +
+				sizeof(struct pmcraid_hcam_hdr));
+}
+
+/**
+ * pmcraid_notify_ldn - notifies about CCN event msg to user space
+ * @pinstance: pointer adapter instance structure
+ *
+ * Return value:
+ *	0 if success, error value in case of any failure
+ */
+static int pmcraid_notify_ldn(struct pmcraid_instance *pinstance)
+{
+	return pmcraid_notify_aen(pinstance,
+				pinstance->ldn.msg,
+				pinstance->ldn.hcam->data_len +
+				sizeof(struct pmcraid_hcam_hdr));
+}
+
+/**
+ * pmcraid_notify_ioastate - sends IOA state event msg to user space
+ * @pinstance: pointer adapter instance structure
+ * @evt: controller state event to be sent
+ *
+ * Return value:
+ *	0 if success, error value in case of any failure
+ */
+static void pmcraid_notify_ioastate(struct pmcraid_instance *pinstance, u32 evt)
+{
+	pinstance->scn.ioa_state = evt;
+	pmcraid_notify_aen(pinstance,
+			  &pinstance->scn.msg,
+			  sizeof(u32));
+}
+
+/**
  * pmcraid_handle_config_change - Handle a config change from the adapter
  * @pinstance: pointer to per adapter instance structure
  *
@@ -1375,10 +1587,12 @@
 	unsigned long host_lock_flags;
 	u32 new_entry = 1;
 	u32 hidden_entry = 0;
+	u16 fw_version;
 	int rc;
 
 	ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam;
 	cfg_entry = &ccn_hcam->cfg_entry;
+	fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
 
 	pmcraid_info
 		("CCN(%x): %x type: %x lost: %x flags: %x res: %x:%x:%x:%x\n",
@@ -1391,7 +1605,10 @@
 		 RES_IS_VSET(*cfg_entry) ? PMCRAID_VSET_BUS_ID :
 		 (RES_IS_GSCSI(*cfg_entry) ? PMCRAID_PHYS_BUS_ID :
 			RES_BUS(cfg_entry->resource_address)),
-		 RES_IS_VSET(*cfg_entry) ? cfg_entry->unique_flags1 :
+		 RES_IS_VSET(*cfg_entry) ?
+			(fw_version <= PMCRAID_FW_VERSION_1 ?
+				cfg_entry->unique_flags1 :
+					cfg_entry->array_id & 0xFF) :
 			RES_TARGET(cfg_entry->resource_address),
 		 RES_LUN(cfg_entry->resource_address));
 
@@ -1415,11 +1632,16 @@
 	 */
 	if (pinstance->ccn.hcam->notification_type ==
 	    NOTIFICATION_TYPE_ENTRY_CHANGED &&
-	    cfg_entry->resource_type == RES_TYPE_VSET &&
-	    cfg_entry->unique_flags1 & 0x80) {
-		hidden_entry = 1;
-	} else if (!pmcraid_expose_resource(cfg_entry))
+	    cfg_entry->resource_type == RES_TYPE_VSET) {
+
+		if (fw_version <= PMCRAID_FW_VERSION_1)
+			hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
+		else
+			hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
+
+	} else if (!pmcraid_expose_resource(fw_version, cfg_entry)) {
 		goto out_notify_apps;
+	}
 
 	spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
 	list_for_each_entry(res, &pinstance->used_res_q, queue) {
@@ -1466,13 +1688,15 @@
 		list_add_tail(&res->queue, &pinstance->used_res_q);
 	}
 
-	memcpy(&res->cfg_entry, cfg_entry,
-		sizeof(struct pmcraid_config_table_entry));
+	memcpy(&res->cfg_entry, cfg_entry, pinstance->config_table_entry_size);
 
 	if (pinstance->ccn.hcam->notification_type ==
 	    NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) {
 		if (res->scsi_dev) {
-			res->cfg_entry.unique_flags1 &= 0x7F;
+			if (fw_version <= PMCRAID_FW_VERSION_1)
+				res->cfg_entry.unique_flags1 &= 0x7F;
+			else
+				res->cfg_entry.array_id &= 0xFF;
 			res->change_detected = RES_CHANGE_DEL;
 			res->cfg_entry.resource_handle =
 				PMCRAID_INVALID_RES_HANDLE;
@@ -1491,7 +1715,7 @@
 
 	/* Notify configuration changes to registered applications.*/
 	if (!pmcraid_disable_aen)
-		pmcraid_notify_aen(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
+		pmcraid_notify_ccn(pinstance);
 
 	cmd = pmcraid_init_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
 	if (cmd)
@@ -1528,7 +1752,7 @@
 		return;
 
 	/* log the error string */
-	pmcraid_err("cmd [%d] for resource %x failed with %x(%s)\n",
+	pmcraid_err("cmd [%x] for resource %x failed with %x(%s)\n",
 		cmd->ioa_cb->ioarcb.cdb[0],
 		cmd->ioa_cb->ioarcb.resource_handle,
 		le32_to_cpu(ioasc), error_info->error_string);
@@ -1663,7 +1887,7 @@
 	}
 	/* send netlink message for HCAM notification if enabled */
 	if (!pmcraid_disable_aen)
-		pmcraid_notify_aen(pinstance, PMCRAID_HCAM_CODE_LOG_DATA);
+		pmcraid_notify_ldn(pinstance);
 
 	cmd = pmcraid_init_hcam(pinstance, PMCRAID_HCAM_CODE_LOG_DATA);
 	if (cmd)
@@ -1701,10 +1925,13 @@
 	atomic_set(&pinstance->ldn.ignore, 1);
 
 	/* If adapter reset was forced as part of runtime reset sequence,
-	 * start the reset sequence.
+	 * start the reset sequence. Reset will be triggered even in case
+	 * IOA unit_check.
 	 */
-	if (pinstance->force_ioa_reset && !pinstance->ioa_bringdown) {
+	if ((pinstance->force_ioa_reset && !pinstance->ioa_bringdown) ||
+	     pinstance->ioa_unit_check) {
 		pinstance->force_ioa_reset = 0;
+		pinstance->ioa_unit_check = 0;
 		pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
 		pmcraid_reset_alert(cmd);
 		return;
@@ -1735,10 +1962,13 @@
 	pmcraid_enable_interrupts(pinstance, PMCRAID_PCI_INTERRUPTS);
 
 	if (intrs & INTRS_TRANSITION_TO_OPERATIONAL) {
-		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
-			pinstance->int_regs.ioa_host_interrupt_mask_reg);
-		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
-			pinstance->int_regs.ioa_host_interrupt_clr_reg);
+		if (!pinstance->interrupt_mode) {
+			iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
+				pinstance->int_regs.
+				ioa_host_interrupt_mask_reg);
+			iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
+				pinstance->int_regs.ioa_host_interrupt_clr_reg);
+		}
 		return 1;
 	} else {
 		return 0;
@@ -1777,8 +2007,19 @@
 	doorbell = DOORBELL_RUNTIME_RESET |
 		   DOORBELL_ENABLE_DESTRUCTIVE_DIAGS;
 
+	/* Since we do RESET_ALERT and Start BIST we have to again write
+	 * MSIX Doorbell to indicate the interrupt mode
+	 */
+	if (pinstance->interrupt_mode) {
+		iowrite32(DOORBELL_INTR_MODE_MSIX,
+			  pinstance->int_regs.host_ioa_interrupt_reg);
+		ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
+	}
+
 	iowrite32(doorbell, pinstance->int_regs.host_ioa_interrupt_reg);
+	ioread32(pinstance->int_regs.host_ioa_interrupt_reg),
 	int_reg = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
+
 	pmcraid_info("Waiting for IOA to become operational %x:%x\n",
 		     ioread32(pinstance->int_regs.host_ioa_interrupt_reg),
 		     int_reg);
@@ -1854,7 +2095,8 @@
 		} else if (cmd->cmd_done == pmcraid_internal_done ||
 			   cmd->cmd_done == pmcraid_erp_done) {
 			cmd->cmd_done(cmd);
-		} else if (cmd->cmd_done != pmcraid_ioa_reset) {
+		} else if (cmd->cmd_done != pmcraid_ioa_reset &&
+			   cmd->cmd_done != pmcraid_ioa_shutdown_done) {
 			pmcraid_return_cmd(cmd);
 		}
 
@@ -1964,6 +2206,13 @@
 			pinstance->ioa_reset_attempts = 0;
 			pmcraid_err("IOA didn't respond marking it as dead\n");
 			pinstance->ioa_state = IOA_STATE_DEAD;
+
+			if (pinstance->ioa_bringdown)
+				pmcraid_notify_ioastate(pinstance,
+					PMC_DEVICE_EVENT_SHUTDOWN_FAILED);
+			else
+				pmcraid_notify_ioastate(pinstance,
+						PMC_DEVICE_EVENT_RESET_FAILED);
 			reset_complete = 1;
 			break;
 		}
@@ -1971,7 +2220,6 @@
 		/* Once either bist or pci reset is done, restore PCI config
 		 * space. If this fails, proceed with hard reset again
 		 */
-
 		if (pci_restore_state(pinstance->pdev)) {
 			pmcraid_info("config-space error resetting again\n");
 			pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT;
@@ -2002,6 +2250,8 @@
 			pinstance->ioa_shutdown_type = SHUTDOWN_NONE;
 			pinstance->ioa_bringdown = 0;
 			pinstance->ioa_state = IOA_STATE_UNKNOWN;
+			pmcraid_notify_ioastate(pinstance,
+					PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS);
 			reset_complete = 1;
 		} else {
 			/* bring-up IOA, so proceed with soft reset
@@ -2051,6 +2301,8 @@
 		 */
 		if (pinstance->ioa_shutdown_type == SHUTDOWN_NONE &&
 		    pinstance->force_ioa_reset == 0) {
+			pmcraid_notify_ioastate(pinstance,
+						PMC_DEVICE_EVENT_RESET_SUCCESS);
 			reset_complete = 1;
 		} else {
 			if (pinstance->ioa_shutdown_type != SHUTDOWN_NONE)
@@ -2116,6 +2368,8 @@
 		pinstance->ioa_shutdown_type = SHUTDOWN_NONE;
 		pinstance->reset_cmd = cmd;
 		pinstance->force_ioa_reset = 1;
+		pmcraid_notify_ioastate(pinstance,
+					PMC_DEVICE_EVENT_RESET_START);
 		pmcraid_ioa_reset(cmd);
 	}
 }
@@ -2191,7 +2445,7 @@
 		wait_event(pinstance->reset_wait_q,
 			   !pinstance->ioa_reset_in_progress);
 
-		pmcraid_info("reset_reload: reset is complete !! \n");
+		pmcraid_info("reset_reload: reset is complete !!\n");
 		scsi_unblock_requests(pinstance->host);
 		if (pinstance->ioa_state == target_state)
 			reset = 0;
@@ -2225,6 +2479,8 @@
  */
 static int pmcraid_reset_bringup(struct pmcraid_instance *pinstance)
 {
+	pmcraid_notify_ioastate(pinstance, PMC_DEVICE_EVENT_RESET_START);
+
 	return pmcraid_reset_reload(pinstance,
 				    SHUTDOWN_NONE,
 				    IOA_STATE_OPERATIONAL);
@@ -2704,7 +2960,7 @@
 
 	pmcraid_info("command (%d) CDB[0] = %x for %x\n",
 		le32_to_cpu(cancel_cmd->ioa_cb->ioarcb.response_handle) >> 2,
-		cmd->ioa_cb->ioarcb.cdb[0],
+		cancel_cmd->ioa_cb->ioarcb.cdb[0],
 		le32_to_cpu(cancel_cmd->ioa_cb->ioarcb.resource_handle));
 
 	pmcraid_send_cmd(cancel_cmd,
@@ -2729,8 +2985,8 @@
 	u32 ioasc;
 
 	wait_for_completion(&cancel_cmd->wait_for_completion);
-	res = cancel_cmd->u.res;
-	cancel_cmd->u.res = NULL;
+	res = cancel_cmd->res;
+	cancel_cmd->res = NULL;
 	ioasc = le32_to_cpu(cancel_cmd->ioa_cb->ioasa.ioasc);
 
 	/* If the abort task is not timed out we will get a Good completion
@@ -2823,7 +3079,7 @@
 			       host_lock_flags);
 
 	if (cancel_cmd) {
-		cancel_cmd->u.res = cmd->scsi_cmd->device->hostdata;
+		cancel_cmd->res = cmd->scsi_cmd->device->hostdata;
 		rc = pmcraid_abort_complete(cancel_cmd);
 	}
 
@@ -2842,7 +3098,7 @@
  * takes care by locking/unlocking host_lock.
  *
  * Return value
- * 	SUCCESS or FAILED
+ *	SUCCESS or FAILED
  */
 static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
 {
@@ -2879,7 +3135,7 @@
  * Initiates adapter reset to bring it up to operational state
  *
  * Return value
- * 	SUCCESS or FAILED
+ *	SUCCESS or FAILED
  */
 static int pmcraid_eh_host_reset_handler(struct scsi_cmnd *scmd)
 {
@@ -2991,7 +3247,7 @@
  * to firmware. This builds ioadl descriptors and sets up ioarcb fields.
  *
  * Return value:
- * 	0 on success or -1 on failure
+ *	0 on success or -1 on failure
  */
 static int pmcraid_build_ioadl(
 	struct pmcraid_instance *pinstance,
@@ -3049,7 +3305,7 @@
  * Free a DMA'able memory previously allocated with pmcraid_alloc_sglist
  *
  * Return value:
- * 	none
+ *	none
  */
 static void pmcraid_free_sglist(struct pmcraid_sglist *sglist)
 {
@@ -3070,7 +3326,7 @@
  * list.
  *
  * Return value
- * 	pointer to sglist / NULL on failure
+ *	pointer to sglist / NULL on failure
  */
 static struct pmcraid_sglist *pmcraid_alloc_sglist(int buflen)
 {
@@ -3224,11 +3480,12 @@
 	struct pmcraid_resource_entry *res;
 	struct pmcraid_ioarcb *ioarcb;
 	struct pmcraid_cmd *cmd;
+	u32 fw_version;
 	int rc = 0;
 
 	pinstance =
 		(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
-
+	fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
 	scsi_cmd->scsi_done = done;
 	res = scsi_cmd->device->hostdata;
 	scsi_cmd->result = (DID_OK << 16);
@@ -3247,6 +3504,15 @@
 	if (pinstance->ioa_reset_in_progress)
 		return SCSI_MLQUEUE_HOST_BUSY;
 
+	/* Firmware doesn't support SYNCHRONIZE_CACHE command (0x35), complete
+	 * the command here itself with success return
+	 */
+	if (scsi_cmd->cmnd[0] == SYNCHRONIZE_CACHE) {
+		pmcraid_info("SYNC_CACHE(0x35), completing in driver itself\n");
+		scsi_cmd->scsi_done(scsi_cmd);
+		return 0;
+	}
+
 	/* initialize the command and IOARCB to be sent to IOA */
 	cmd = pmcraid_get_free_cmd(pinstance);
 
@@ -3261,6 +3527,13 @@
 	ioarcb->resource_handle = res->cfg_entry.resource_handle;
 	ioarcb->request_type = REQ_TYPE_SCSI;
 
+	/* set hrrq number where the IOA should respond to. Note that all cmds
+	 * generated internally uses hrrq_id 0, exception to this is the cmd
+	 * block of scsi_cmd which is re-used (e.g. cancel/abort), which uses
+	 * hrrq_id assigned here in queuecommand
+	 */
+	ioarcb->hrrq_id = atomic_add_return(1, &(pinstance->last_message_id)) %
+			  pinstance->num_hrrq;
 	cmd->cmd_done = pmcraid_io_done;
 
 	if (RES_IS_GSCSI(res->cfg_entry) || RES_IS_VSET(res->cfg_entry)) {
@@ -3287,7 +3560,9 @@
 		     RES_IS_VSET(res->cfg_entry) ? PMCRAID_VSET_BUS_ID :
 			PMCRAID_PHYS_BUS_ID,
 		     RES_IS_VSET(res->cfg_entry) ?
-			res->cfg_entry.unique_flags1 :
+			(fw_version <= PMCRAID_FW_VERSION_1 ?
+				res->cfg_entry.unique_flags1 :
+					res->cfg_entry.array_id & 0xFF) :
 			RES_TARGET(res->cfg_entry.resource_address),
 		     RES_LUN(res->cfg_entry.resource_address));
 
@@ -3465,6 +3740,7 @@
 	unsigned long request_buffer;
 	unsigned long request_offset;
 	unsigned long lock_flags;
+	u32 ioasc;
 	int request_size;
 	int buffer_size;
 	u8 access, direction;
@@ -3566,6 +3842,14 @@
 			buffer->ioarcb.add_cmd_param_length);
 	}
 
+	/* set hrrq number where the IOA should respond to. Note that all cmds
+	 * generated internally uses hrrq_id 0, exception to this is the cmd
+	 * block of scsi_cmd which is re-used (e.g. cancel/abort), which uses
+	 * hrrq_id assigned here in queuecommand
+	 */
+	ioarcb->hrrq_id = atomic_add_return(1, &(pinstance->last_message_id)) %
+			  pinstance->num_hrrq;
+
 	if (request_size) {
 		rc = pmcraid_build_passthrough_ioadls(cmd,
 						      request_size,
@@ -3606,6 +3890,14 @@
 	_pmcraid_fire_command(cmd);
 	spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
 
+	/* NOTE ! Remove the below line once abort_task is implemented
+	 * in firmware. This line disables ioctl command timeout handling logic
+	 * similar to IO command timeout handling, making ioctl commands to wait
+	 * until the command completion regardless of timeout value specified in
+	 * ioarcb
+	 */
+	buffer->ioarcb.cmd_timeout = 0;
+
 	/* If command timeout is specified put caller to wait till that time,
 	 * otherwise it would be blocking wait. If command gets timed out, it
 	 * will be aborted.
@@ -3620,25 +3912,47 @@
 			le32_to_cpu(cmd->ioa_cb->ioarcb.response_handle >> 2),
 			cmd->ioa_cb->ioarcb.cdb[0]);
 
-		rc = -ETIMEDOUT;
 		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 		cancel_cmd = pmcraid_abort_cmd(cmd);
 		spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
 
 		if (cancel_cmd) {
 			wait_for_completion(&cancel_cmd->wait_for_completion);
+			ioasc = cancel_cmd->ioa_cb->ioasa.ioasc;
 			pmcraid_return_cmd(cancel_cmd);
+
+			/* if abort task couldn't find the command i.e it got
+			 * completed prior to aborting, return good completion.
+			 * if command got aborted succesfully or there was IOA
+			 * reset due to abort task itself getting timedout then
+			 * return -ETIMEDOUT
+			 */
+			if (ioasc == PMCRAID_IOASC_IOA_WAS_RESET ||
+			    PMCRAID_IOASC_SENSE_KEY(ioasc) == 0x00) {
+				if (ioasc != PMCRAID_IOASC_GC_IOARCB_NOTFOUND)
+					rc = -ETIMEDOUT;
+				goto out_handle_response;
+			}
 		}
 
-		goto out_free_sglist;
+		/* no command block for abort task or abort task failed to abort
+		 * the IOARCB, then wait for 150 more seconds and initiate reset
+		 * sequence after timeout
+		 */
+		if (!wait_for_completion_timeout(
+			&cmd->wait_for_completion,
+			msecs_to_jiffies(150 * 1000))) {
+			pmcraid_reset_bringup(cmd->drv_inst);
+			rc = -ETIMEDOUT;
+		}
 	}
 
+out_handle_response:
 	/* If the command failed for any reason, copy entire IOASA buffer and
 	 * return IOCTL success. If copying IOASA to user-buffer fails, return
 	 * EFAULT
 	 */
-	if (le32_to_cpu(cmd->ioa_cb->ioasa.ioasc)) {
-
+	if (PMCRAID_IOASC_SENSE_KEY(le32_to_cpu(cmd->ioa_cb->ioasa.ioasc))) {
 		void *ioasa =
 		    (void *)(arg +
 		    offsetof(struct pmcraid_passthrough_ioctl_buffer, ioasa));
@@ -3651,6 +3965,7 @@
 			rc = -EFAULT;
 		}
 	}
+
 	/* If the data transfer was from device, copy the data onto user
 	 * buffers
 	 */
@@ -3699,7 +4014,7 @@
 	int rc = -ENOSYS;
 
 	if (!access_ok(VERIFY_READ, user_buffer, _IOC_SIZE(cmd))) {
-		pmcraid_err("ioctl_driver: access fault in request buffer \n");
+		pmcraid_err("ioctl_driver: access fault in request buffer\n");
 		return -EFAULT;
 	}
 
@@ -4011,36 +4326,77 @@
 	.proc_name = PMCRAID_DRIVER_NAME
 };
 
-/**
- * pmcraid_isr_common - Common interrupt handler routine
- *
- * @pinstance: pointer to adapter instance
- * @intrs: active interrupts (contents of ioa_host_interrupt register)
- * @hrrq_id: Host RRQ index
+/*
+ * pmcraid_isr_msix - implements MSI-X interrupt handling routine
+ * @irq: interrupt vector number
+ * @dev_id: pointer hrrq_vector
  *
  * Return Value
- *	none
+ *	 IRQ_HANDLED if interrupt is handled or IRQ_NONE if ignored
  */
-static void pmcraid_isr_common(
-	struct pmcraid_instance *pinstance,
-	u32 intrs,
-	int hrrq_id
-)
-{
-	u32 intrs_clear =
-		(intrs & INTRS_CRITICAL_OP_IN_PROGRESS) ? intrs
-							: INTRS_HRRQ_VALID;
-	iowrite32(intrs_clear,
-		  pinstance->int_regs.ioa_host_interrupt_clr_reg);
-	intrs = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
 
-	/* hrrq valid bit was set, schedule tasklet to handle the response */
-	if (intrs_clear == INTRS_HRRQ_VALID)
-		tasklet_schedule(&(pinstance->isr_tasklet[hrrq_id]));
+static irqreturn_t pmcraid_isr_msix(int irq, void *dev_id)
+{
+	struct pmcraid_isr_param *hrrq_vector;
+	struct pmcraid_instance *pinstance;
+	unsigned long lock_flags;
+	u32 intrs_val;
+	int hrrq_id;
+
+	hrrq_vector = (struct pmcraid_isr_param *)dev_id;
+	hrrq_id = hrrq_vector->hrrq_id;
+	pinstance = hrrq_vector->drv_inst;
+
+	if (!hrrq_id) {
+		/* Read the interrupt */
+		intrs_val = pmcraid_read_interrupts(pinstance);
+		if (intrs_val &&
+			((ioread32(pinstance->int_regs.host_ioa_interrupt_reg)
+			& DOORBELL_INTR_MSIX_CLR) == 0)) {
+			/* Any error interrupts including unit_check,
+			 * initiate IOA reset.In case of unit check indicate
+			 * to reset_sequence that IOA unit checked and prepare
+			 * for a dump during reset sequence
+			 */
+			if (intrs_val & PMCRAID_ERROR_INTERRUPTS) {
+				if (intrs_val & INTRS_IOA_UNIT_CHECK)
+					pinstance->ioa_unit_check = 1;
+
+				pmcraid_err("ISR: error interrupts: %x \
+					initiating reset\n", intrs_val);
+				spin_lock_irqsave(pinstance->host->host_lock,
+					lock_flags);
+				pmcraid_initiate_reset(pinstance);
+				spin_unlock_irqrestore(
+					pinstance->host->host_lock,
+					lock_flags);
+			}
+			/* If interrupt was as part of the ioa initialization,
+			 * clear it. Delete the timer and wakeup the
+			 * reset engine to proceed with reset sequence
+			 */
+			if (intrs_val & INTRS_TRANSITION_TO_OPERATIONAL)
+				pmcraid_clr_trans_op(pinstance);
+
+			/* Clear the interrupt register by writing
+			 * to host to ioa doorbell. Once done
+			 * FW will clear the interrupt.
+			 */
+			iowrite32(DOORBELL_INTR_MSIX_CLR,
+				pinstance->int_regs.host_ioa_interrupt_reg);
+			ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
+
+
+		}
+	}
+
+	tasklet_schedule(&(pinstance->isr_tasklet[hrrq_id]));
+
+	return IRQ_HANDLED;
 }
 
 /**
- * pmcraid_isr  - implements interrupt handling routine
+ * pmcraid_isr  - implements legacy interrupt handling routine
  *
  * @irq: interrupt vector number
  * @dev_id: pointer hrrq_vector
@@ -4052,8 +4408,9 @@
 {
 	struct pmcraid_isr_param *hrrq_vector;
 	struct pmcraid_instance *pinstance;
-	unsigned long lock_flags;
 	u32 intrs;
+	unsigned long lock_flags;
+	int hrrq_id = 0;
 
 	/* In case of legacy interrupt mode where interrupts are shared across
 	 * isrs, it may be possible that the current interrupt is not from IOA
@@ -4062,21 +4419,13 @@
 		printk(KERN_INFO "%s(): NULL host pointer\n", __func__);
 		return IRQ_NONE;
 	}
-
 	hrrq_vector = (struct pmcraid_isr_param *)dev_id;
 	pinstance = hrrq_vector->drv_inst;
 
-	/* Acquire the lock (currently host_lock) while processing interrupts.
-	 * This interval is small as most of the response processing is done by
-	 * tasklet without the lock.
-	 */
-	spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 	intrs = pmcraid_read_interrupts(pinstance);
 
-	if (unlikely((intrs & PMCRAID_PCI_INTERRUPTS) == 0)) {
-		spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
+	if (unlikely((intrs & PMCRAID_PCI_INTERRUPTS) == 0))
 		return IRQ_NONE;
-	}
 
 	/* Any error interrupts including unit_check, initiate IOA reset.
 	 * In case of unit check indicate to reset_sequence that IOA unit
@@ -4091,13 +4440,28 @@
 			  pinstance->int_regs.ioa_host_interrupt_clr_reg);
 		pmcraid_err("ISR: error interrupts: %x initiating reset\n",
 			    intrs);
-		intrs = ioread32(pinstance->int_regs.ioa_host_interrupt_reg);
+		intrs = ioread32(
+				pinstance->int_regs.ioa_host_interrupt_clr_reg);
+		spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
 		pmcraid_initiate_reset(pinstance);
+		spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
 	} else {
-		pmcraid_isr_common(pinstance, intrs, hrrq_vector->hrrq_id);
-	}
+		/* If interrupt was as part of the ioa initialization,
+		 * clear. Delete the timer and wakeup the
+		 * reset engine to proceed with reset sequence
+		 */
+		if (intrs & INTRS_TRANSITION_TO_OPERATIONAL) {
+			pmcraid_clr_trans_op(pinstance);
+		} else {
+			iowrite32(intrs,
+				pinstance->int_regs.ioa_host_interrupt_clr_reg);
+			ioread32(
+				pinstance->int_regs.ioa_host_interrupt_clr_reg);
 
-	spin_unlock_irqrestore(pinstance->host->host_lock, lock_flags);
+			tasklet_schedule(
+					&(pinstance->isr_tasklet[hrrq_id]));
+		}
+	}
 
 	return IRQ_HANDLED;
 }
@@ -4120,6 +4484,7 @@
 	struct scsi_device *sdev;
 	unsigned long lock_flags;
 	unsigned long host_lock_flags;
+	u16 fw_version;
 	u8 bus, target, lun;
 
 	pinstance = container_of(workp, struct pmcraid_instance, worker_q);
@@ -4127,6 +4492,8 @@
 	if (!atomic_read(&pinstance->expose_resources))
 		return;
 
+	fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
+
 	spin_lock_irqsave(&pinstance->resource_lock, lock_flags);
 	list_for_each_entry_safe(res, temp, &pinstance->used_res_q, queue) {
 
@@ -4166,12 +4533,16 @@
 
 		if (res->change_detected == RES_CHANGE_ADD) {
 
-			if (!pmcraid_expose_resource(&res->cfg_entry))
+			if (!pmcraid_expose_resource(fw_version,
+						     &res->cfg_entry))
 				continue;
 
 			if (RES_IS_VSET(res->cfg_entry)) {
 				bus = PMCRAID_VSET_BUS_ID;
-				target = res->cfg_entry.unique_flags1;
+				if (fw_version <= PMCRAID_FW_VERSION_1)
+					target = res->cfg_entry.unique_flags1;
+				else
+					target = res->cfg_entry.array_id & 0xFF;
 				lun = PMCRAID_VSET_LUN_ID;
 			} else {
 				bus = PMCRAID_PHYS_BUS_ID;
@@ -4201,7 +4572,7 @@
  * Return Value
  *	None
  */
-void pmcraid_tasklet_function(unsigned long instance)
+static void pmcraid_tasklet_function(unsigned long instance)
 {
 	struct pmcraid_isr_param *hrrq_vector;
 	struct pmcraid_instance *pinstance;
@@ -4210,35 +4581,12 @@
 	unsigned long host_lock_flags;
 	spinlock_t *lockp; /* hrrq buffer lock */
 	int id;
-	u32 intrs;
 	__le32 resp;
 
 	hrrq_vector = (struct pmcraid_isr_param *)instance;
 	pinstance = hrrq_vector->drv_inst;
 	id = hrrq_vector->hrrq_id;
 	lockp = &(pinstance->hrrq_lock[id]);
-	intrs = pmcraid_read_interrupts(pinstance);
-
-	/* If interrupts was as part of the ioa initialization, clear and mask
-	 * it. Delete the timer and wakeup the reset engine to proceed with
-	 * reset sequence
-	 */
-	if (intrs & INTRS_TRANSITION_TO_OPERATIONAL) {
-		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
-			pinstance->int_regs.ioa_host_interrupt_mask_reg);
-		iowrite32(INTRS_TRANSITION_TO_OPERATIONAL,
-			pinstance->int_regs.ioa_host_interrupt_clr_reg);
-
-		if (pinstance->reset_cmd != NULL) {
-			del_timer(&pinstance->reset_cmd->timer);
-			spin_lock_irqsave(pinstance->host->host_lock,
-					  host_lock_flags);
-			pinstance->reset_cmd->cmd_done(pinstance->reset_cmd);
-			spin_unlock_irqrestore(pinstance->host->host_lock,
-					       host_lock_flags);
-		}
-		return;
-	}
 
 	/* loop through each of the commands responded by IOA. Each HRRQ buf is
 	 * protected by its own lock. Traversals must be done within this lock
@@ -4256,27 +4604,6 @@
 		int cmd_index = resp >> 2;
 		struct pmcraid_cmd *cmd = NULL;
 
-		if (cmd_index < PMCRAID_MAX_CMD) {
-			cmd = pinstance->cmd_list[cmd_index];
-		} else {
-			/* In case of invalid response handle, initiate IOA
-			 * reset sequence.
-			 */
-			spin_unlock_irqrestore(lockp, hrrq_lock_flags);
-
-			pmcraid_err("Invalid response %d initiating reset\n",
-				    cmd_index);
-
-			spin_lock_irqsave(pinstance->host->host_lock,
-					  host_lock_flags);
-			pmcraid_initiate_reset(pinstance);
-			spin_unlock_irqrestore(pinstance->host->host_lock,
-					       host_lock_flags);
-
-			spin_lock_irqsave(lockp, hrrq_lock_flags);
-			break;
-		}
-
 		if (pinstance->hrrq_curr[id] < pinstance->hrrq_end[id]) {
 			pinstance->hrrq_curr[id]++;
 		} else {
@@ -4284,6 +4611,14 @@
 			pinstance->host_toggle_bit[id] ^= 1u;
 		}
 
+		if (cmd_index >= PMCRAID_MAX_CMD) {
+			/* In case of invalid response handle, log message */
+			pmcraid_err("Invalid response handle %d\n", cmd_index);
+			resp = le32_to_cpu(*(pinstance->hrrq_curr[id]));
+			continue;
+		}
+
+		cmd = pinstance->cmd_list[cmd_index];
 		spin_unlock_irqrestore(lockp, hrrq_lock_flags);
 
 		spin_lock_irqsave(&pinstance->pending_pool_lock,
@@ -4324,7 +4659,16 @@
 static
 void pmcraid_unregister_interrupt_handler(struct pmcraid_instance *pinstance)
 {
-	free_irq(pinstance->pdev->irq, &(pinstance->hrrq_vector[0]));
+	int i;
+
+	for (i = 0; i < pinstance->num_hrrq; i++)
+		free_irq(pinstance->hrrq_vector[i].vector,
+			 &(pinstance->hrrq_vector[i]));
+
+	if (pinstance->interrupt_mode) {
+		pci_disable_msix(pinstance->pdev);
+		pinstance->interrupt_mode = 0;
+	}
 }
 
 /**
@@ -4337,14 +4681,70 @@
 static int
 pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)
 {
+	int rc;
 	struct pci_dev *pdev = pinstance->pdev;
 
+	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+		int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
+		struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
+		int i;
+		for (i = 0; i < PMCRAID_NUM_MSIX_VECTORS; i++)
+			entries[i].entry = i;
+
+		rc = pci_enable_msix(pdev, entries, num_hrrq);
+		if (rc < 0)
+			goto pmcraid_isr_legacy;
+
+		/* Check how many MSIX vectors are allocated and register
+		 * msi-x handlers for each of them giving appropriate buffer
+		 */
+		if (rc > 0) {
+			num_hrrq = rc;
+			if (pci_enable_msix(pdev, entries, num_hrrq))
+				goto pmcraid_isr_legacy;
+		}
+
+		for (i = 0; i < num_hrrq; i++) {
+			pinstance->hrrq_vector[i].hrrq_id = i;
+			pinstance->hrrq_vector[i].drv_inst = pinstance;
+			pinstance->hrrq_vector[i].vector = entries[i].vector;
+			rc = request_irq(pinstance->hrrq_vector[i].vector,
+					pmcraid_isr_msix, 0,
+					PMCRAID_DRIVER_NAME,
+					&(pinstance->hrrq_vector[i]));
+
+			if (rc) {
+				int j;
+				for (j = 0; j < i; j++)
+					free_irq(entries[j].vector,
+						 &(pinstance->hrrq_vector[j]));
+				pci_disable_msix(pdev);
+				goto pmcraid_isr_legacy;
+			}
+		}
+
+		pinstance->num_hrrq = num_hrrq;
+		pinstance->interrupt_mode = 1;
+		iowrite32(DOORBELL_INTR_MODE_MSIX,
+			  pinstance->int_regs.host_ioa_interrupt_reg);
+		ioread32(pinstance->int_regs.host_ioa_interrupt_reg);
+		goto pmcraid_isr_out;
+	}
+
+pmcraid_isr_legacy:
+	/* If MSI-X registration failed fallback to legacy mode, where
+	 * only one hrrq entry will be used
+	 */
 	pinstance->hrrq_vector[0].hrrq_id = 0;
 	pinstance->hrrq_vector[0].drv_inst = pinstance;
-	pinstance->hrrq_vector[0].vector = 0;
+	pinstance->hrrq_vector[0].vector = pdev->irq;
 	pinstance->num_hrrq = 1;
-	return request_irq(pdev->irq, pmcraid_isr, IRQF_SHARED,
-			   PMCRAID_DRIVER_NAME, &pinstance->hrrq_vector[0]);
+	rc = 0;
+
+	rc = request_irq(pdev->irq, pmcraid_isr, IRQF_SHARED,
+			 PMCRAID_DRIVER_NAME, &pinstance->hrrq_vector[0]);
+pmcraid_isr_out:
+	return rc;
 }
 
 /**
@@ -4516,12 +4916,11 @@
 static int __devinit
 pmcraid_allocate_host_rrqs(struct pmcraid_instance *pinstance)
 {
-	int i;
-	int buf_count = PMCRAID_MAX_CMD / pinstance->num_hrrq;
+	int i, buffer_size;
+
+	buffer_size = HRRQ_ENTRY_SIZE * PMCRAID_MAX_CMD;
 
 	for (i = 0; i < pinstance->num_hrrq; i++) {
-		int buffer_size = HRRQ_ENTRY_SIZE * buf_count;
-
 		pinstance->hrrq_start[i] =
 			pci_alloc_consistent(
 					pinstance->pdev,
@@ -4529,7 +4928,8 @@
 					&(pinstance->hrrq_start_bus_addr[i]));
 
 		if (pinstance->hrrq_start[i] == 0) {
-			pmcraid_err("could not allocate host rrq: %d\n", i);
+			pmcraid_err("pci_alloc failed for hrrq vector : %d\n",
+				    i);
 			pmcraid_release_host_rrqs(pinstance, i);
 			return -ENOMEM;
 		}
@@ -4537,7 +4937,7 @@
 		memset(pinstance->hrrq_start[i], 0, buffer_size);
 		pinstance->hrrq_curr[i] = pinstance->hrrq_start[i];
 		pinstance->hrrq_end[i] =
-			pinstance->hrrq_start[i] + buf_count - 1;
+			pinstance->hrrq_start[i] + PMCRAID_MAX_CMD - 1;
 		pinstance->host_toggle_bit[i] = 1;
 		spin_lock_init(&pinstance->hrrq_lock[i]);
 	}
@@ -4557,7 +4957,7 @@
 	if (pinstance->ccn.msg != NULL) {
 		pci_free_consistent(pinstance->pdev,
 				    PMCRAID_AEN_HDR_SIZE +
-				    sizeof(struct pmcraid_hcam_ccn),
+				    sizeof(struct pmcraid_hcam_ccn_ext),
 				    pinstance->ccn.msg,
 				    pinstance->ccn.baddr);
 
@@ -4591,7 +4991,7 @@
 	pinstance->ccn.msg = pci_alloc_consistent(
 					pinstance->pdev,
 					PMCRAID_AEN_HDR_SIZE +
-					sizeof(struct pmcraid_hcam_ccn),
+					sizeof(struct pmcraid_hcam_ccn_ext),
 					&(pinstance->ccn.baddr));
 
 	pinstance->ldn.msg = pci_alloc_consistent(
@@ -4724,6 +5124,32 @@
 }
 
 /**
+ * pmcraid_release_buffers - release per-adapter buffers allocated
+ *
+ * @pinstance: pointer to adapter soft state
+ *
+ * Return Value
+ *	none
+ */
+static void pmcraid_release_buffers(struct pmcraid_instance *pinstance)
+{
+	pmcraid_release_config_buffers(pinstance);
+	pmcraid_release_control_blocks(pinstance, PMCRAID_MAX_CMD);
+	pmcraid_release_cmd_blocks(pinstance, PMCRAID_MAX_CMD);
+	pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
+
+	if (pinstance->inq_data != NULL) {
+		pci_free_consistent(pinstance->pdev,
+				    sizeof(struct pmcraid_inquiry_data),
+				    pinstance->inq_data,
+				    pinstance->inq_data_baddr);
+
+		pinstance->inq_data = NULL;
+		pinstance->inq_data_baddr = 0;
+	}
+}
+
+/**
  * pmcraid_init_buffers - allocates memory and initializes various structures
  * @pinstance: pointer to per adapter instance structure
  *
@@ -4753,20 +5179,32 @@
 	}
 
 	if (pmcraid_allocate_cmd_blocks(pinstance)) {
-		pmcraid_err("couldn't allocate memory for cmd blocks \n");
+		pmcraid_err("couldn't allocate memory for cmd blocks\n");
 		pmcraid_release_config_buffers(pinstance);
 		pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
 		return -ENOMEM;
 	}
 
 	if (pmcraid_allocate_control_blocks(pinstance)) {
-		pmcraid_err("couldn't allocate memory control blocks \n");
+		pmcraid_err("couldn't allocate memory control blocks\n");
 		pmcraid_release_config_buffers(pinstance);
 		pmcraid_release_cmd_blocks(pinstance, PMCRAID_MAX_CMD);
 		pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
 		return -ENOMEM;
 	}
 
+	/* allocate DMAable memory for page D0 INQUIRY buffer */
+	pinstance->inq_data = pci_alloc_consistent(
+					pinstance->pdev,
+					sizeof(struct pmcraid_inquiry_data),
+					&pinstance->inq_data_baddr);
+
+	if (pinstance->inq_data == NULL) {
+		pmcraid_err("couldn't allocate DMA memory for INQUIRY\n");
+		pmcraid_release_buffers(pinstance);
+		return -ENOMEM;
+	}
+
 	/* Initialize all the command blocks and add them to free pool. No
 	 * need to lock (free_pool_lock) as this is done in initialization
 	 * itself
@@ -4785,7 +5223,7 @@
  * pmcraid_reinit_buffers - resets various buffer pointers
  * @pinstance: pointer to adapter instance
  * Return value
- * 	none
+ *	none
  */
 static void pmcraid_reinit_buffers(struct pmcraid_instance *pinstance)
 {
@@ -4836,6 +5274,8 @@
 			mapped_pci_addr + chip_cfg->ioa_host_intr;
 		pint_regs->ioa_host_interrupt_clr_reg =
 			mapped_pci_addr + chip_cfg->ioa_host_intr_clr;
+		pint_regs->ioa_host_msix_interrupt_reg =
+			mapped_pci_addr + chip_cfg->ioa_host_msix_intr;
 		pint_regs->host_ioa_interrupt_reg =
 			mapped_pci_addr + chip_cfg->host_ioa_intr;
 		pint_regs->host_ioa_interrupt_clr_reg =
@@ -4858,6 +5298,7 @@
 	init_waitqueue_head(&pinstance->reset_wait_q);
 
 	atomic_set(&pinstance->outstanding_cmds, 0);
+	atomic_set(&pinstance->last_message_id, 0);
 	atomic_set(&pinstance->expose_resources, 0);
 
 	INIT_LIST_HEAD(&pinstance->free_res_q);
@@ -4883,23 +5324,6 @@
 }
 
 /**
- * pmcraid_release_buffers - release per-adapter buffers allocated
- *
- * @pinstance: pointer to adapter soft state
- *
- * Return Value
- * 	none
- */
-static void pmcraid_release_buffers(struct pmcraid_instance *pinstance)
-{
-	pmcraid_release_config_buffers(pinstance);
-	pmcraid_release_control_blocks(pinstance, PMCRAID_MAX_CMD);
-	pmcraid_release_cmd_blocks(pinstance, PMCRAID_MAX_CMD);
-	pmcraid_release_host_rrqs(pinstance, pinstance->num_hrrq);
-
-}
-
-/**
  * pmcraid_shutdown - shutdown adapter controller.
  * @pdev: pci device struct
  *
@@ -4958,7 +5382,7 @@
 		pmcraid_release_minor(minor);
 	else
 		device_create(pmcraid_class, NULL, MKDEV(pmcraid_major, minor),
-			      NULL, "pmcsas%u", minor);
+			      NULL, "%s%u", PMCRAID_DEVFILE, minor);
 	return error;
 }
 
@@ -5050,7 +5474,6 @@
 	struct pmcraid_instance *pinstance = pci_get_drvdata(pdev);
 	struct Scsi_Host *host = pinstance->host;
 	int rc;
-	int hrrqs;
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_enable_wake(pdev, PCI_D0, 0);
@@ -5077,8 +5500,8 @@
 		goto disable_device;
 	}
 
+	pmcraid_disable_interrupts(pinstance, ~0);
 	atomic_set(&pinstance->outstanding_cmds, 0);
-	hrrqs = pinstance->num_hrrq;
 	rc = pmcraid_register_interrupt_handler(pinstance);
 
 	if (rc) {
@@ -5100,7 +5523,7 @@
 	 * state.
 	 */
 	if (pmcraid_reset_bringup(pinstance)) {
-		dev_err(&pdev->dev, "couldn't initialize IOA \n");
+		dev_err(&pdev->dev, "couldn't initialize IOA\n");
 		rc = -ENODEV;
 		goto release_tasklets;
 	}
@@ -5108,6 +5531,7 @@
 	return 0;
 
 release_tasklets:
+	pmcraid_disable_interrupts(pinstance, ~0);
 	pmcraid_kill_tasklets(pinstance);
 	pmcraid_unregister_interrupt_handler(pinstance);
 
@@ -5129,7 +5553,7 @@
 
 /**
  * pmcraid_complete_ioa_reset - Called by either timer or tasklet during
- * 	                        completion of the ioa reset
+ *				completion of the ioa reset
  * @cmd: pointer to reset command block
  */
 static void pmcraid_complete_ioa_reset(struct pmcraid_cmd *cmd)
@@ -5204,11 +5628,14 @@
 	struct pmcraid_config_table_entry *cfgte;
 	unsigned long lock_flags;
 	int found, rc, i;
+	u16 fw_version;
 	LIST_HEAD(old_res);
 
 	if (pinstance->cfg_table->flags & MICROCODE_UPDATE_REQUIRED)
 		pmcraid_err("IOA requires microcode download\n");
 
+	fw_version = be16_to_cpu(pinstance->inq_data->fw_version);
+
 	/* resource list is protected by pinstance->resource_lock.
 	 * init_res_table can be called from probe (user-thread) or runtime
 	 * reset (timer/tasklet)
@@ -5219,9 +5646,14 @@
 		list_move_tail(&res->queue, &old_res);
 
 	for (i = 0; i < pinstance->cfg_table->num_entries; i++) {
-		cfgte = &pinstance->cfg_table->entries[i];
+		if (be16_to_cpu(pinstance->inq_data->fw_version) <=
+						PMCRAID_FW_VERSION_1)
+			cfgte = &pinstance->cfg_table->entries[i];
+		else
+			cfgte = (struct pmcraid_config_table_entry *)
+					&pinstance->cfg_table->entries_ext[i];
 
-		if (!pmcraid_expose_resource(cfgte))
+		if (!pmcraid_expose_resource(fw_version, cfgte))
 			continue;
 
 		found = 0;
@@ -5263,10 +5695,12 @@
 		 */
 		if (found) {
 			memcpy(&res->cfg_entry, cfgte,
-				sizeof(struct pmcraid_config_table_entry));
+					pinstance->config_table_entry_size);
 			pmcraid_info("New res type:%x, vset:%x, addr:%x:\n",
 				 res->cfg_entry.resource_type,
-				 res->cfg_entry.unique_flags1,
+				 (fw_version <= PMCRAID_FW_VERSION_1 ?
+					res->cfg_entry.unique_flags1 :
+						res->cfg_entry.array_id & 0xFF),
 				 le32_to_cpu(res->cfg_entry.resource_address));
 		}
 	}
@@ -5306,6 +5740,14 @@
 	struct pmcraid_instance *pinstance = cmd->drv_inst;
 	int cfg_table_size = cpu_to_be32(sizeof(struct pmcraid_config_table));
 
+	if (be16_to_cpu(pinstance->inq_data->fw_version) <=
+					PMCRAID_FW_VERSION_1)
+		pinstance->config_table_entry_size =
+			sizeof(struct pmcraid_config_table_entry);
+	else
+		pinstance->config_table_entry_size =
+			sizeof(struct pmcraid_config_table_entry_ext);
+
 	ioarcb->request_type = REQ_TYPE_IOACMD;
 	ioarcb->resource_handle = cpu_to_le32(PMCRAID_IOA_RES_HANDLE);
 
@@ -5338,7 +5780,7 @@
 
 
 /**
- * pmcraid_probe - PCI probe entry pointer for PMC MaxRaid controller driver
+ * pmcraid_probe - PCI probe entry pointer for PMC MaxRAID controller driver
  * @pdev: pointer to pci device structure
  * @dev_id: pointer to device ids structure
  *
@@ -5485,7 +5927,7 @@
 	 */
 	pmcraid_info("starting IOA initialization sequence\n");
 	if (pmcraid_reset_bringup(pinstance)) {
-		dev_err(&pdev->dev, "couldn't initialize IOA \n");
+		dev_err(&pdev->dev, "couldn't initialize IOA\n");
 		rc = 1;
 		goto out_release_bufs;
 	}
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index b8ad07c..6cfa014 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -40,10 +40,12 @@
  * Driver version: version string in major_version.minor_version.patch format
  * Driver date   : date information in "Mon dd yyyy" format
  */
-#define PMCRAID_DRIVER_NAME       	"PMC MaxRAID"
+#define PMCRAID_DRIVER_NAME		"PMC MaxRAID"
 #define PMCRAID_DEVFILE			"pmcsas"
-#define PMCRAID_DRIVER_VERSION    	"1.0.2"
-#define PMCRAID_DRIVER_DATE       	__DATE__
+#define PMCRAID_DRIVER_VERSION		"2.0.2"
+#define PMCRAID_DRIVER_DATE		__DATE__
+
+#define PMCRAID_FW_VERSION_1		0x002
 
 /* Maximum number of adapters supported by current version of the driver */
 #define PMCRAID_MAX_ADAPTERS		1024
@@ -85,17 +87,17 @@
 #define PMCRAID_IOARCB_ALIGNMENT                 32
 #define PMCRAID_IOADL_ALIGNMENT                  16
 #define PMCRAID_IOASA_ALIGNMENT                  4
-#define PMCRAID_NUM_MSIX_VECTORS                 1
+#define PMCRAID_NUM_MSIX_VECTORS                 16
 
 /* various other limits */
-#define PMCRAID_VENDOR_ID_LEN           	 8
-#define PMCRAID_PRODUCT_ID_LEN            	 16
-#define PMCRAID_SERIAL_NUM_LEN          	 8
-#define PMCRAID_LUN_LEN			         8
-#define PMCRAID_MAX_CDB_LEN                      16
-#define PMCRAID_DEVICE_ID_LEN			 8
-#define PMCRAID_SENSE_DATA_LEN			 256
-#define PMCRAID_ADD_CMD_PARAM_LEN		 48
+#define PMCRAID_VENDOR_ID_LEN			8
+#define PMCRAID_PRODUCT_ID_LEN			16
+#define PMCRAID_SERIAL_NUM_LEN			8
+#define PMCRAID_LUN_LEN				8
+#define PMCRAID_MAX_CDB_LEN			16
+#define PMCRAID_DEVICE_ID_LEN			8
+#define PMCRAID_SENSE_DATA_LEN			256
+#define PMCRAID_ADD_CMD_PARAM_LEN		48
 
 #define PMCRAID_MAX_BUS_TO_SCAN                  1
 #define PMCRAID_MAX_NUM_TARGETS_PER_BUS          256
@@ -116,17 +118,10 @@
 #define PMCRAID_VSET_MAX_SECTORS                 512
 #define PMCRAID_MAX_CMD_PER_LUN                  254
 
-/* Number of configuration table entries (resources) */
-#define PMCRAID_MAX_NUM_OF_VSETS                 240
-
-/* Todo : Check max limit for Phase 1 */
-#define PMCRAID_MAX_NUM_OF_PHY_DEVS              256
-
-/* MAX_NUM_OF_DEVS includes 1 FP, 1 Dummy Enclosure device */
-#define PMCRAID_MAX_NUM_OF_DEVS                        \
-    (PMCRAID_MAX_NUM_OF_VSETS + PMCRAID_MAX_NUM_OF_PHY_DEVS + 2)
-
-#define PMCRAID_MAX_RESOURCES                    PMCRAID_MAX_NUM_OF_DEVS
+/* Number of configuration table entries (resources), includes 1 FP,
+ * 1 Enclosure device
+ */
+#define PMCRAID_MAX_RESOURCES                    256
 
 /* Adapter Commands used by driver */
 #define PMCRAID_QUERY_RESOURCE_STATE             0xC2
@@ -177,6 +172,7 @@
 #define PMCRAID_IOASC_SENSE_STATUS(ioasc)        ((ioasc) & 0x000000ff)
 
 #define PMCRAID_IOASC_GOOD_COMPLETION			0x00000000
+#define PMCRAID_IOASC_GC_IOARCB_NOTFOUND		0x005A0000
 #define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED		0x02040200
 #define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED		0x02048000
 #define PMCRAID_IOASC_NR_SYNC_REQUIRED			0x023F0000
@@ -187,12 +183,12 @@
 #define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED		0x04448600
 #define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE        0x05250000
 #define PMCRAID_IOASC_AC_TERMINATED_BY_HOST		0x0B5A0000
-#define PMCRAID_IOASC_UA_BUS_WAS_RESET           	0x06290000
-#define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER  	0x06298000
+#define PMCRAID_IOASC_UA_BUS_WAS_RESET			0x06290000
+#define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER		0x06298000
 
 /* Driver defined IOASCs */
-#define PMCRAID_IOASC_IOA_WAS_RESET              	0x10000001
-#define PMCRAID_IOASC_PCI_ACCESS_ERROR           	0x10000002
+#define PMCRAID_IOASC_IOA_WAS_RESET			0x10000001
+#define PMCRAID_IOASC_PCI_ACCESS_ERROR			0x10000002
 
 /* Various timeout values (in milliseconds) used. If any of these are chip
  * specific, move them to pmcraid_chip_details structure.
@@ -336,6 +332,13 @@
 	__u8  lun[PMCRAID_LUN_LEN];
 } __attribute__((packed, aligned(4)));
 
+/* extended configuration table sizes are of 64 bytes in size */
+#define PMCRAID_CFGTE_EXT_SIZE	32
+struct pmcraid_config_table_entry_ext {
+	struct pmcraid_config_table_entry cfgte;
+	__u8  cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
+};
+
 /* resource types (config_table_entry.resource_type values) */
 #define RES_TYPE_AF_DASD     0x00
 #define RES_TYPE_GSCSI       0x01
@@ -376,7 +379,12 @@
 	__u8  reserved1;
 	__u8  flags;
 	__u8  reserved2[11];
-	struct pmcraid_config_table_entry entries[PMCRAID_MAX_RESOURCES];
+	union {
+		struct pmcraid_config_table_entry
+				entries[PMCRAID_MAX_RESOURCES];
+		struct pmcraid_config_table_entry_ext
+				entries_ext[PMCRAID_MAX_RESOURCES];
+	};
 } __attribute__((packed, aligned(4)));
 
 /* config_table.flags value */
@@ -385,7 +393,7 @@
 /*
  * HCAM format
  */
-#define PMCRAID_HOSTRCB_LDNSIZE 		4056
+#define PMCRAID_HOSTRCB_LDNSIZE			4056
 
 /* Error log notification format */
 struct pmcraid_hostrcb_error {
@@ -416,6 +424,15 @@
 struct pmcraid_hcam_ccn {
 	struct pmcraid_hcam_hdr header;
 	struct pmcraid_config_table_entry cfg_entry;
+	struct pmcraid_config_table_entry cfg_entry_old;
+} __attribute__((packed, aligned(4)));
+
+#define PMCRAID_CCN_EXT_SIZE	3944
+struct pmcraid_hcam_ccn_ext {
+	struct pmcraid_hcam_hdr header;
+	struct pmcraid_config_table_entry_ext cfg_entry;
+	struct pmcraid_config_table_entry_ext cfg_entry_old;
+	__u8   reserved[PMCRAID_CCN_EXT_SIZE];
 } __attribute__((packed, aligned(4)));
 
 struct pmcraid_hcam_ldn {
@@ -431,6 +448,8 @@
 #define NOTIFICATION_TYPE_ENTRY_CHANGED		0x0
 #define NOTIFICATION_TYPE_ENTRY_NEW		0x1
 #define NOTIFICATION_TYPE_ENTRY_DELETED		0x2
+#define NOTIFICATION_TYPE_STATE_CHANGE		0x3
+#define NOTIFICATION_TYPE_ENTRY_STATECHANGED	0x4
 #define NOTIFICATION_TYPE_ERROR_LOG		0x10
 #define NOTIFICATION_TYPE_INFORMATION_LOG	0x11
 
@@ -460,6 +479,7 @@
 	unsigned long  mailbox;
 	unsigned long  global_intr_mask;
 	unsigned long  ioa_host_intr;
+	unsigned long  ioa_host_msix_intr;
 	unsigned long  ioa_host_intr_clr;
 	unsigned long  ioa_host_mask;
 	unsigned long  ioa_host_mask_clr;
@@ -482,6 +502,7 @@
 #define INTRS_IOA_PROCESSOR_ERROR		PMC_BIT32(29)
 #define INTRS_HRRQ_VALID			PMC_BIT32(30)
 #define INTRS_OPERATIONAL_STATUS		PMC_BIT32(0)
+#define INTRS_ALLOW_MSIX_VECTOR0		PMC_BIT32(31)
 
 /* Host to IOA Doorbells */
 #define DOORBELL_RUNTIME_RESET			PMC_BIT32(1)
@@ -489,10 +510,12 @@
 #define DOORBELL_IOA_DEBUG_ALERT		PMC_BIT32(9)
 #define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS	PMC_BIT32(8)
 #define DOORBELL_IOA_START_BIST			PMC_BIT32(23)
+#define DOORBELL_INTR_MODE_MSIX			PMC_BIT32(25)
+#define DOORBELL_INTR_MSIX_CLR			PMC_BIT32(26)
 #define DOORBELL_RESET_IOA			PMC_BIT32(31)
 
 /* Global interrupt mask register value */
-#define GLOBAL_INTERRUPT_MASK			0x4ULL
+#define GLOBAL_INTERRUPT_MASK			0x5ULL
 
 #define PMCRAID_ERROR_INTERRUPTS	(INTRS_IOARCB_TRANSFER_FAILED | \
 					 INTRS_IOA_UNIT_CHECK | \
@@ -503,8 +526,8 @@
 
 #define PMCRAID_PCI_INTERRUPTS		(PMCRAID_ERROR_INTERRUPTS | \
 					 INTRS_HRRQ_VALID | \
-					 INTRS_CRITICAL_OP_IN_PROGRESS |\
-					 INTRS_TRANSITION_TO_OPERATIONAL)
+					 INTRS_TRANSITION_TO_OPERATIONAL |\
+					 INTRS_ALLOW_MSIX_VECTOR0)
 
 /* control_block, associated with each of the commands contains IOARCB, IOADLs
  * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
@@ -526,17 +549,24 @@
 	struct scatterlist scatterlist[1];
 };
 
+/* page D0 inquiry data of focal point resource */
+struct pmcraid_inquiry_data {
+	__u8	ph_dev_type;
+	__u8	page_code;
+	__u8	reserved1;
+	__u8	add_page_len;
+	__u8	length;
+	__u8	reserved2;
+	__le16	fw_version;
+	__u8	reserved3[16];
+};
+
 /* pmcraid_cmd - LLD representation of SCSI command */
 struct pmcraid_cmd {
 
 	/* Ptr and bus address of DMA.able control block for this command */
 	struct pmcraid_control_block *ioa_cb;
 	dma_addr_t ioa_cb_bus_addr;
-
-	/* sense buffer for REQUEST SENSE command if firmware is not sending
-	 * auto sense data
-	 */
-	dma_addr_t sense_buffer_dma;
 	dma_addr_t dma_handle;
 	u8 *sense_buffer;
 
@@ -556,11 +586,22 @@
 
 	struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
 
-	/* scratch used during reset sequence */
+	/* scratch used */
 	union {
+		/* during reset sequence */
 		unsigned long time_left;
 		struct pmcraid_resource_entry *res;
-	} u;
+		int hrrq_index;
+
+		/* used during IO command error handling. Sense buffer
+		 * for REQUEST SENSE command if firmware is not sending
+		 * auto sense data
+		 */
+		struct  {
+			u8 *sense_buffer;
+			dma_addr_t sense_buffer_dma;
+		};
+	};
 };
 
 /*
@@ -568,6 +609,7 @@
  */
 struct pmcraid_interrupts {
 	void __iomem *ioa_host_interrupt_reg;
+	void __iomem *ioa_host_msix_interrupt_reg;
 	void __iomem *ioa_host_interrupt_clr_reg;
 	void __iomem *ioa_host_interrupt_mask_reg;
 	void __iomem *ioa_host_interrupt_mask_clr_reg;
@@ -578,11 +620,12 @@
 
 /* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
 struct pmcraid_isr_param {
-	u8 hrrq_id;			/* hrrq entry index */
-	u16 vector;			/* allocated msi-x vector */
 	struct pmcraid_instance *drv_inst;
+	u16 vector;			/* allocated msi-x vector */
+	u8 hrrq_id;			/* hrrq entry index */
 };
 
+
 /* AEN message header sent as part of event data to applications */
 struct pmcraid_aen_msg {
 	u32 hostno;
@@ -591,6 +634,19 @@
 	u8  data[0];
 };
 
+/* Controller state event message type */
+struct pmcraid_state_msg {
+	struct pmcraid_aen_msg msg;
+	u32 ioa_state;
+};
+
+#define PMC_DEVICE_EVENT_RESET_START		0x11000000
+#define PMC_DEVICE_EVENT_RESET_SUCCESS		0x11000001
+#define PMC_DEVICE_EVENT_RESET_FAILED		0x11000002
+#define PMC_DEVICE_EVENT_SHUTDOWN_START		0x11000003
+#define PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS	0x11000004
+#define PMC_DEVICE_EVENT_SHUTDOWN_FAILED	0x11000005
+
 struct pmcraid_hostrcb {
 	struct pmcraid_instance *drv_inst;
 	struct pmcraid_aen_msg *msg;
@@ -628,6 +684,7 @@
 	/* HostRCBs needed for HCAM */
 	struct pmcraid_hostrcb ldn;
 	struct pmcraid_hostrcb ccn;
+	struct pmcraid_state_msg scn;	/* controller state change msg */
 
 
 	/* Bus address of start of HRRQ */
@@ -645,12 +702,15 @@
 	/* Lock for HRRQ access */
 	spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
 
+	struct pmcraid_inquiry_data *inq_data;
+	dma_addr_t  inq_data_baddr;
+
+	/* size of configuration table entry, varies based on the firmware */
+	u32	config_table_entry_size;
+
 	/* Expected toggle bit at host */
 	u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
 
-	/* No of Reset IOA retries . IOA marked dead if threshold exceeds */
-	u8 ioa_reset_attempts;
-#define PMCRAID_RESET_ATTEMPTS 3
 
 	/* Wait Q for  threads to wait for Reset IOA completion */
 	wait_queue_head_t reset_wait_q;
@@ -664,14 +724,22 @@
 	struct Scsi_Host *host;	/* mid layer interface structure handle */
 	struct pci_dev *pdev;	/* PCI device structure handle */
 
+	/* No of Reset IOA retries . IOA marked dead if threshold exceeds */
+	u8 ioa_reset_attempts;
+#define PMCRAID_RESET_ATTEMPTS 3
+
 	u8  current_log_level;	/* default level for logging IOASC errors */
 
 	u8  num_hrrq;		/* Number of interrupt vectors allocated */
+	u8  interrupt_mode;	/* current interrupt mode legacy or msix */
 	dev_t dev;		/* Major-Minor numbers for Char device */
 
 	/* Used as ISR handler argument */
 	struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
 
+	/* Message id as filled in last fired IOARCB, used to identify HRRQ */
+	atomic_t last_message_id;
+
 	/* configuration table */
 	struct pmcraid_config_table *cfg_table;
 	dma_addr_t cfg_table_bus_addr;
@@ -686,8 +754,14 @@
 
 	struct list_head free_cmd_pool;
 	struct list_head pending_cmd_pool;
-	spinlock_t free_pool_lock;	 	/* free pool lock */
-	spinlock_t pending_pool_lock;	 	/* pending pool lock */
+	spinlock_t free_pool_lock;		/* free pool lock */
+	spinlock_t pending_pool_lock;		/* pending pool lock */
+
+	/* Tasklet to handle deferred processing */
+	struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
+
+	/* Work-queue (Shared) for deferred reset processing */
+	struct work_struct worker_q;
 
 	/* No of IO commands pending with FW */
 	atomic_t outstanding_cmds;
@@ -695,11 +769,6 @@
 	/* should add/delete resources to mid-layer now ?*/
 	atomic_t expose_resources;
 
-	/* Tasklet to handle deferred processing */
-	struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
-
-	/* Work-queue (Shared) for deferred reset processing */
-	struct work_struct worker_q;
 
 
 	u32 ioa_state:4;	/* For IOA Reset sequence FSM */
@@ -728,7 +797,10 @@
 /* LLD maintained resource entry structure */
 struct pmcraid_resource_entry {
 	struct list_head queue;	/* link to "to be exposed" resources */
-	struct pmcraid_config_table_entry cfg_entry;
+	union {
+		struct pmcraid_config_table_entry cfg_entry;
+		struct pmcraid_config_table_entry_ext cfg_entry_ext;
+	};
 	struct scsi_device *scsi_dev;	/* Link scsi_device structure */
 	atomic_t read_failures;		/* count of failed READ commands */
 	atomic_t write_failures;	/* count of failed WRITE commands */
@@ -771,73 +843,75 @@
  * statically.
  */
 static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
-	{0x01180600, IOASC_LOG_LEVEL_MUST,
+	{0x01180600, IOASC_LOG_LEVEL_HARD,
 	 "Recovered Error, soft media error, sector reassignment suggested"},
-	{0x015D0000, IOASC_LOG_LEVEL_MUST,
-	 "Recovered Error, failure prediction threshold exceeded"},
-	{0x015D9200, IOASC_LOG_LEVEL_MUST,
-	 "Recovered Error, soft Cache Card Battery error threshold"},
-	{0x015D9200, IOASC_LOG_LEVEL_MUST,
-	 "Recovered Error, soft Cache Card Battery error threshold"},
-	{0x02048000, IOASC_LOG_LEVEL_MUST,
+	{0x015D0000, IOASC_LOG_LEVEL_HARD,
+	 "Recovered Error, failure prediction thresold exceeded"},
+	{0x015D9200, IOASC_LOG_LEVEL_HARD,
+	 "Recovered Error, soft Cache Card Battery error thresold"},
+	{0x015D9200, IOASC_LOG_LEVEL_HARD,
+	 "Recovered Error, soft Cache Card Battery error thresold"},
+	{0x02048000, IOASC_LOG_LEVEL_HARD,
 	 "Not Ready, IOA Reset Required"},
-	{0x02408500, IOASC_LOG_LEVEL_MUST,
+	{0x02408500, IOASC_LOG_LEVEL_HARD,
 	 "Not Ready, IOA microcode download required"},
-	{0x03110B00, IOASC_LOG_LEVEL_MUST,
+	{0x03110B00, IOASC_LOG_LEVEL_HARD,
 	 "Medium Error, data unreadable, reassignment suggested"},
 	{0x03110C00, IOASC_LOG_LEVEL_MUST,
 	 "Medium Error, data unreadable do not reassign"},
-	{0x03310000, IOASC_LOG_LEVEL_MUST,
+	{0x03310000, IOASC_LOG_LEVEL_HARD,
 	 "Medium Error, media corrupted"},
-	{0x04050000, IOASC_LOG_LEVEL_MUST,
+	{0x04050000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA can't communicate with device"},
 	{0x04080000, IOASC_LOG_LEVEL_MUST,
 	 "Hardware Error, device bus error"},
-	{0x04080000, IOASC_LOG_LEVEL_MUST,
+	{0x04088000, IOASC_LOG_LEVEL_MUST,
 	 "Hardware Error, device bus is not functioning"},
-	{0x04118000, IOASC_LOG_LEVEL_MUST,
+	{0x04118000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA reserved area data check"},
-	{0x04118100, IOASC_LOG_LEVEL_MUST,
+	{0x04118100, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA reserved area invalid data pattern"},
-	{0x04118200, IOASC_LOG_LEVEL_MUST,
+	{0x04118200, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA reserved area LRC error"},
-	{0x04320000, IOASC_LOG_LEVEL_MUST,
+	{0x04320000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, reassignment space exhausted"},
-	{0x04330000, IOASC_LOG_LEVEL_MUST,
+	{0x04330000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, data transfer underlength error"},
-	{0x04330000, IOASC_LOG_LEVEL_MUST,
+	{0x04330000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, data transfer overlength error"},
 	{0x04418000, IOASC_LOG_LEVEL_MUST,
 	 "Hardware Error, PCI bus error"},
-	{0x04440000, IOASC_LOG_LEVEL_MUST,
+	{0x04440000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, device error"},
-	{0x04448300, IOASC_LOG_LEVEL_MUST,
+	{0x04448200, IOASC_LOG_LEVEL_MUST,
+	 "Hardware Error, IOA error"},
+	{0x04448300, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, undefined device response"},
-	{0x04448400, IOASC_LOG_LEVEL_MUST,
+	{0x04448400, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA microcode error"},
-	{0x04448600, IOASC_LOG_LEVEL_MUST,
+	{0x04448600, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, IOA reset required"},
-	{0x04449200, IOASC_LOG_LEVEL_MUST,
+	{0x04449200, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, hard Cache Fearuee Card Battery error"},
-	{0x0444A000, IOASC_LOG_LEVEL_MUST,
+	{0x0444A000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, failed device altered"},
-	{0x0444A200, IOASC_LOG_LEVEL_MUST,
+	{0x0444A200, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, data check after reassignment"},
-	{0x0444A300, IOASC_LOG_LEVEL_MUST,
+	{0x0444A300, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, LRC error after reassignment"},
-	{0x044A0000, IOASC_LOG_LEVEL_MUST,
+	{0x044A0000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, device bus error (msg/cmd phase)"},
-	{0x04670400, IOASC_LOG_LEVEL_MUST,
+	{0x04670400, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, new device can't be used"},
-	{0x04678000, IOASC_LOG_LEVEL_MUST,
+	{0x04678000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, invalid multiadapter configuration"},
-	{0x04678100, IOASC_LOG_LEVEL_MUST,
+	{0x04678100, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, incorrect connection between enclosures"},
-	{0x04678200, IOASC_LOG_LEVEL_MUST,
+	{0x04678200, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, connections exceed IOA design limits"},
-	{0x04678300, IOASC_LOG_LEVEL_MUST,
+	{0x04678300, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, incorrect multipath connection"},
-	{0x04679000, IOASC_LOG_LEVEL_MUST,
+	{0x04679000, IOASC_LOG_LEVEL_HARD,
 	 "Hardware Error, command to LUN failed"},
 	{0x064C8000, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, cache exists for missing/failed device"},
@@ -845,15 +919,15 @@
 	 "Unit Attention, incompatible exposed mode device"},
 	{0x06670600, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, attachment of logical unit failed"},
-	{0x06678000, IOASC_LOG_LEVEL_MUST,
+	{0x06678000, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, cables exceed connective design limit"},
-	{0x06678300, IOASC_LOG_LEVEL_MUST,
+	{0x06678300, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, incomplete multipath connection between" \
 	 "IOA and enclosure"},
-	{0x06678400, IOASC_LOG_LEVEL_MUST,
+	{0x06678400, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, incomplete multipath connection between" \
 	 "device and enclosure"},
-	{0x06678500, IOASC_LOG_LEVEL_MUST,
+	{0x06678500, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, incomplete multipath connection between" \
 	 "IOA and remote IOA"},
 	{0x06678600, IOASC_LOG_LEVEL_HARD,
@@ -863,11 +937,11 @@
 	 "function"},
 	{0x06698200, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, corrupt array parity detected on device"},
-	{0x066B0200, IOASC_LOG_LEVEL_MUST,
+	{0x066B0200, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, array exposed"},
 	{0x066B8200, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, exposed array is still protected"},
-	{0x066B9200, IOASC_LOG_LEVEL_MUST,
+	{0x066B9200, IOASC_LOG_LEVEL_HARD,
 	 "Unit Attention, Multipath redundancy level got worse"},
 	{0x07270000, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, device is read/write protected by IOA"},
@@ -875,37 +949,37 @@
 	 "Data Protect, IOA doesn't support device attribute"},
 	{0x07278100, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, NVRAM mirroring prohibited"},
-	{0x07278400, IOASC_LOG_LEVEL_MUST,
+	{0x07278400, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, array is short 2 or more devices"},
-	{0x07278600, IOASC_LOG_LEVEL_MUST,
+	{0x07278600, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, exposed array is short a required device"},
-	{0x07278700, IOASC_LOG_LEVEL_MUST,
+	{0x07278700, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, array members not at required addresses"},
-	{0x07278800, IOASC_LOG_LEVEL_MUST,
+	{0x07278800, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, exposed mode device resource address conflict"},
-	{0x07278900, IOASC_LOG_LEVEL_MUST,
+	{0x07278900, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, incorrect resource address of exposed mode device"},
-	{0x07278A00, IOASC_LOG_LEVEL_MUST,
+	{0x07278A00, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, Array is missing a device and parity is out of sync"},
-	{0x07278B00, IOASC_LOG_LEVEL_MUST,
+	{0x07278B00, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, maximum number of arrays already exist"},
 	{0x07278C00, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, cannot locate cache data for device"},
 	{0x07278D00, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, cache data exits for a changed device"},
-	{0x07279100, IOASC_LOG_LEVEL_MUST,
+	{0x07279100, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, detection of a device requiring format"},
-	{0x07279200, IOASC_LOG_LEVEL_MUST,
+	{0x07279200, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, IOA exceeds maximum number of devices"},
-	{0x07279600, IOASC_LOG_LEVEL_MUST,
+	{0x07279600, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, missing array, volume set is not functional"},
-	{0x07279700, IOASC_LOG_LEVEL_MUST,
+	{0x07279700, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, single device for a volume set"},
-	{0x07279800, IOASC_LOG_LEVEL_MUST,
+	{0x07279800, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, missing multiple devices for a volume set"},
 	{0x07279900, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, maximum number of volument sets already exists"},
-	{0x07279A00, IOASC_LOG_LEVEL_MUST,
+	{0x07279A00, IOASC_LOG_LEVEL_HARD,
 	 "Data Protect, other volume set problem"},
 };
 
@@ -952,27 +1026,6 @@
 
 #define PMCRAID_IOCTL_SIGNATURE      "PMCRAID"
 
-
-/*
- * pmcraid_event_details - defines AEN details that apps can retrieve from LLD
- *
- * .rcb_ccn - complete RCB of CCN
- * .rcb_ldn - complete RCB of CCN
- */
-struct pmcraid_event_details {
-	struct pmcraid_hcam_ccn rcb_ccn;
-	struct pmcraid_hcam_ldn rcb_ldn;
-};
-
-/*
- * pmcraid_driver_ioctl_buffer - structure passed as argument to most of the
- * PMC driver handled ioctls.
- */
-struct pmcraid_driver_ioctl_buffer {
-	struct pmcraid_ioctl_header ioctl_header;
-	struct pmcraid_event_details event_details;
-};
-
 /*
  * pmcraid_passthrough_ioctl_buffer - structure given as argument to
  * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires