diff --git a/.gitignore b/.gitignore
index cecb3b0..b93fb7e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e369866..f3f37f1 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a52adfc..3d1b0ab 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f8cd450..09e031c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -458,3 +458,13 @@
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 873630e..014d255 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)
diff --git a/MAINTAINERS b/MAINTAINERS
index 381190c..e4b1a3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5803,17 +5803,17 @@
 M:	trivial@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
-F:	drivers/char/tty_*
-F:	drivers/serial/serial_core.c
-F:	include/linux/serial_core.h
-F:	include/linux/serial.h
-F:	include/linux/tty.h
 
 TTY LAYER
 P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 S:	Maintained
 T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
+F:	drivers/char/tty_*
+F:	drivers/serial/serial_core.c
+F:	include/linux/serial_core.h
+F:	include/linux/serial.h
+F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler
diff --git a/Makefile b/Makefile
index d1216fe..0aeec59 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,8 @@
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66..605a846 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun  3 13:52:33 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
-# Loadable module support
+# IO Schedulers
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
 #
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -112,23 +249,48 @@
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -137,8 +299,16 @@
 #
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -149,19 +319,93 @@
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -170,53 +414,156 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
-# Memory Technology Devices (MTD)
+# User Modules And Translation Layers
 #
-# CONFIG_MTD is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
-# Parallel port support
+# RAM/ROM/Flash chip drivers
 #
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# IO Schedulers
+# EEPROM support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -232,145 +579,87 @@
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# USB Network Adapters
 #
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -380,7 +669,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -390,23 +678,25 @@
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -419,159 +709,232 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_AT91_SPI is not set
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Misc devices
+# Memory mapped GPIO expanders:
 #
 
 #
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -579,55 +942,129 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
-# XFS support
+# Caches
 #
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e1..4762d90 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul  2 00:16:59 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,7 @@
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +18,12 @@
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +67,6 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +79,13 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +97,10 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +113,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +145,9 @@
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +223,8 @@
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +250,6 @@
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +264,18 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +366,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +505,7 @@
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -538,6 +547,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -597,9 +607,11 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,20 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1047,7 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1078,16 @@
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1109,6 +1122,7 @@
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d64..c433c6c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -285,15 +285,6 @@
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +375,50 @@
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
  *
- * We support up to 32GB of swap on 4k machines
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6..111f7ea 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/seq_file.h>
 
 #include <asm/clkdev.h>
 #include <mach/hardware.h>
@@ -702,6 +703,7 @@
 	.rate	    = 52000000, /* this varies! */
 	.hw_ctrld   = true,
 	.reset	    = false,
+	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 };
 
 /*
@@ -720,6 +722,7 @@
 	.set_rate   = clk_set_rate_cpuclk,
 	.get_rate   = clk_get_rate_cpuclk,
 	.round_rate = clk_round_rate_cpuclk,
+	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 };
 
 static struct clk nandif_clk = {
@@ -732,6 +735,7 @@
 	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 };
 
 static struct clk semi_clk = {
@@ -744,6 +748,7 @@
 	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@
 	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 };
 
 static struct clk cds_clk = {
@@ -771,6 +777,7 @@
 	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 };
 #endif
 
@@ -785,6 +792,7 @@
 	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 };
 
 static struct clk aaif_clk = {
@@ -798,6 +806,7 @@
 	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 };
 
 static struct clk apex_clk = {
@@ -811,6 +820,7 @@
 	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 };
 
 static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@
 	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 };
 
 static struct clk xgam_clk = {
@@ -839,6 +850,7 @@
 	.get_rate   = clk_get_rate_xgamclk,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 };
 
 /* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 };
 
 
@@ -871,6 +884,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 };
 
 static struct clk intcon_clk = {
@@ -882,6 +896,8 @@
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 	/* INTCON can be reset but not clock-gated */
+	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
 };
 
 static struct clk mspro_clk = {
@@ -895,6 +911,7 @@
 	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 };
 
 static struct clk emif_clk = {
@@ -909,6 +926,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_emif_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 };
 
 
@@ -926,6 +944,7 @@
 	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
 static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@
 	.round_rate = clk_round_rate_mclk,
 	.disable    = syscon_clk_disable,
 	.enable     = syscon_clk_enable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 };
 
 static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 };
 
 static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 };
 
 static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
 };
 
 static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
 static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
 
@@ -1044,6 +1070,7 @@
 	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
 };
 
 /* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@
 	.rate	    = 32768,
 	.reset	    = false,
 	/* This is always on, cannot be enabled/disabled or reset */
+	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
 /* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@
 	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
 };
 
 static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@
 	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
 };
 
 static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
 	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
 	/* This clock is always on, cannot be enabled/disabled */
+	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
 };
 
 static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@
 	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
 };
 
 static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@
 	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
 };
 
 static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@
 	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
 static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@
 	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@
 	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
 };
 #endif
 
@@ -1187,53 +1224,53 @@
  */
 static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba", &amba_clk),
-	DEF_LOOKUP("cpu", &cpu_clk),
-	DEF_LOOKUP("nandif", &nandif_clk),
-	DEF_LOOKUP("semi", &semi_clk),
+	DEF_LOOKUP("amba",      &amba_clk),
+	DEF_LOOKUP("cpu",       &cpu_clk),
+	DEF_LOOKUP("fsmc",      &nandif_clk),
+	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp", &isp_clk),
-	DEF_LOOKUP("cds", &cds_clk),
+	DEF_LOOKUP("isp",       &isp_clk),
+	DEF_LOOKUP("cds",       &cds_clk),
 #endif
-	DEF_LOOKUP("dma", &dma_clk),
-	DEF_LOOKUP("aaif", &aaif_clk),
-	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("dma",       &dma_clk),
+	DEF_LOOKUP("msl",       &aaif_clk),
+	DEF_LOOKUP("apex",      &apex_clk),
 	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam", &xgam_clk),
-	DEF_LOOKUP("ahb", &ahb_clk),
+	DEF_LOOKUP("xgam",      &xgam_clk),
+	DEF_LOOKUP("ahb",       &ahb_clk),
 	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon", &intcon_clk),
-	DEF_LOOKUP("mspro", &mspro_clk),
-	DEF_LOOKUP("pl172", &emif_clk),
+	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon",    &intcon_clk),
+	DEF_LOOKUP("mspro",     &mspro_clk),
+	DEF_LOOKUP("pl172",     &emif_clk),
 	/* FAST bridge clocks */
-	DEF_LOOKUP("fast", &fast_clk),
-	DEF_LOOKUP("mmci", &mmcsd_clk),
+	DEF_LOOKUP("fast",      &fast_clk),
+	DEF_LOOKUP("mmci",      &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
 	 */
-	DEF_LOOKUP("i2s.0", &i2s0_clk),
-	DEF_LOOKUP("i2s.1", &i2s1_clk),
-	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
-	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
-	DEF_LOOKUP("pl022", &spi_clk),
+	DEF_LOOKUP("i2s.0",     &i2s0_clk),
+	DEF_LOOKUP("i2s.1",     &i2s1_clk),
+	DEF_LOOKUP("stu300.0",  &i2c0_clk),
+	DEF_LOOKUP("stu300.1",  &i2c1_clk),
+	DEF_LOOKUP("pl022",     &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1", &uart1_clk),
+	DEF_LOOKUP("uart1",     &uart1_clk),
 #endif
 	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow", &slow_clk),
-	DEF_LOOKUP("wdog", &wdog_clk),
-	DEF_LOOKUP("uart0", &uart_clk),
-	DEF_LOOKUP("apptimer", &app_timer_clk),
-	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("slow",      &slow_clk),
+	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
+	DEF_LOOKUP("uart0",     &uart_clk),
+	DEF_LOOKUP("apptimer",  &app_timer_clk),
+	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc0", &rtc_clk),
-	DEF_LOOKUP("bustr", &bustr_clk),
-	DEF_LOOKUP("evhist", &evhist_clk),
-	DEF_LOOKUP("timer", &timer_clk),
+	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
+	DEF_LOOKUP("bustr",     &bustr_clk),
+	DEF_LOOKUP("evhist",    &evhist_clk),
+	DEF_LOOKUP("timer",     &timer_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm", &ppm_clk),
+	DEF_LOOKUP("ppm",       &ppm_clk),
 #endif
 };
 
@@ -1427,16 +1464,20 @@
 	.release	= single_release,
 };
 
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
 {
 	/* Expose a simple debugfs interface to view all clocks */
 	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL, &u300_clocks_operations);
+				   NULL, NULL,
+				   &u300_clocks_operations);
+	return 0;
 }
-#else
-static inline void init_clk_read_procfs(void)
-{
-}
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
 #endif
 
 static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@
 
 	clk_register();
 
-	init_clk_read_procfs();
-
 	/*
 	 * Some of these may be on when we boot the system so make sure they
 	 * are turned OFF.
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48e..ac5c800 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
 EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491..b91b204 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023..6136c33 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -408,13 +408,14 @@
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
-				break;
+			printk(KERN_CONT "(usable)\n");
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
-				break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
-				break;
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -614,19 +615,19 @@
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,13 +860,13 @@
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
+		printk(KERN_CONT "and Disabled\n");
 
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 	/* we need to initialize the Flashrom device here since we might
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457..8a1caf2 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
@@ -583,15 +583,14 @@
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
 			verbose_printk(KERN_NOTICE "No trace since you do not have "
-				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
-				KERN_NOTICE "\n");
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
 		else
 #endif
 			dump_bfin_trace_buffer();
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
@@ -906,7 +905,7 @@
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-				printk("\n" KERN_NOTICE "%p:",addr);
+				printk(KERN_NOTICE "%p:",addr);
 
 			/* if it is an odd address, or zero, just skip it */
 			if (*addr & 0x1 || !*addr)
@@ -996,9 +995,9 @@
 
 		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
-				KERN_NOTICE "\n",
+			verbose_printk(KERN_NOTICE
+				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
 				(void *)current->mm->start_code,
 				(void *)current->mm->end_code,
 				(void *)current->mm->start_data,
@@ -1009,8 +1008,8 @@
 		else
 			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
-		     "No Valid process in current context\n");
+		verbose_printk(KERN_NOTICE
+			       "No Valid process in current context\n");
 #endif
 }
 
@@ -1028,7 +1027,7 @@
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk(KERN_NOTICE "0x%p: ", addr);
 
 		if (!get_instruction(&val, addr)) {
 				val = 0;
@@ -1056,9 +1055,9 @@
 	    oops_in_progress)){
 		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
-			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
-			 " better idea where it came from\n");
+		verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
 		/* If we are handling only one peripheral interrupt
 		 * and current mm and pid are valid, and the last error
@@ -1114,9 +1113,10 @@
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+		       print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, fp->syscfg);
+		       (long)fp->seqstat, fp->ipend, fp->syscfg);
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1184,7 @@
 		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
 	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
 	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a..b86e19c 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@
 	default y
 	select HAVE_IDE
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_PERF_COUNTERS
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d98..00a57af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@
 #define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
 #define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+	volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long counter;
+
+	asm("ldd%I1 %M1,%0"
+	    : "=e"(counter)
+	    : "m"(v->counter));
+	return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	asm volatile("std%I0 %1,%M0"
+		     : "=m"(v->counter)
+		     : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+	atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+	atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+	atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+	atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
+
 /*****************************************************************************/
 /*
  * exchange value with memory
  */
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define xchg(ptr, x)								\
@@ -174,8 +236,10 @@
 
 #define tas(ptr) (xchg((ptr), 1))
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new)	(__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new)		(__xchg_64(new, &(v)->counter))
 
 static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 {
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 0000000..ccf726e
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET	0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec0..efd22d9 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@
  * - if (*ptr == test) then orig = *ptr; *ptr = test;
  * - if (*ptr != test) then orig = *ptr;
  */
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define cmpxchg(ptr, test, new)							\
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c..a89803b 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@
 EXPORT_SYMBOL(__xchg_32);
 EXPORT_SYMBOL(__cmpxchg_32);
 #endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
 
 EXPORT_SYMBOL(__debug_bug_printk);
 EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305..0a37721 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
 
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
-	checksum.o memcpy.o memset.o atomic-ops.o \
-	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac90..5e9e6ab 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@
 	ld.p		@(gr11,gr0),gr8
 	orcr		cc7,cc7,cc3
 	subcc		gr8,gr9,gr7,icc0
-	bne		icc0,#0,1f
+	bnelr		icc0,#0
 	cst.p		gr10,@(gr11,gr0)	,cc3,#1
 	corcc		gr29,gr29,gr0		,cc3,#1
 	beq		icc3,#0,0b
-1:
 	bralr
 
 	.size		__cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 0000000..b6194ee
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_inc_return
+        .type		atomic64_inc_return,@function
+atomic64_inc_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addicc		gr9,#1,gr9,icc0
+	addxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_dec_return
+        .type		atomic64_dec_return,@function
+atomic64_dec_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subicc		gr9,#1,gr9,icc0
+	subxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_add_return
+        .type		atomic64_add_return,@function
+atomic64_add_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addcc		gr9,gr5,gr9,icc0
+	addx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_sub_return
+        .type		atomic64_sub_return,@function
+atomic64_sub_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subcc		gr9,gr5,gr9,icc0
+	subx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+	.globl		__xchg_64
+        .type		__xchg_64,@function
+__xchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cstd.p		gr4,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+	.globl		__cmpxchg_64
+        .type		__cmpxchg_64,@function
+__cmpxchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr12,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr4,gr0,icc0
+	subcc.p		gr9,gr5,gr0,icc1
+	bnelr		icc0,#0
+	bnelr		icc1,#0
+	cstd.p		gr10,@(gr12,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 0000000..2000fee
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f..7de76dd 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@
 /*
  * PCI BIOS setup, always defaults to SAL interface
  */
-char * __devinit
+char * __init
 pcibios_setup (char *str)
 {
 	return str;
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6e..8f8f4ab 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@
 	unsigned char	*tp;
 	int		i;
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
 	printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
 
 	if (current->mm) {
@@ -301,8 +301,7 @@
 			(int) current->mm->end_data,
 			(int) current->mm->end_data,
 			(int) current->mm->brk);
-		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
-			KERN_EMERG "\n",
+		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
 			(int) current->mm->start_stack,
 			(int)(((unsigned long) current) + THREAD_SIZE));
 	}
@@ -313,35 +312,35 @@
 		fp->d0, fp->d1, fp->d2, fp->d3);
 	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
 		fp->d4, fp->d5, fp->a0, fp->a1);
-	printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x   TRAPFRAME: %08x\n",
+	printk(KERN_EMERG "\nUSP: %08x   TRAPFRAME: %08x\n",
 		(unsigned int) rdusp(), (unsigned int) fp);
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+	printk(KERN_EMERG "\nCODE:");
 	tp = ((unsigned char *) fp->pc) - 0x20;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "KERNEL STACK:");
 	tp = ((unsigned char *) fp) - 0x40;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "USER STACK:");
 	tp = (unsigned char *) (rdusp() - 0x10);
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 }
 
 /*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d3253..3739c8f 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@
 	if (i % 5)
 		printk(KERN_CONT " [%08lx] ", addr);
 	else
-		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+		printk(KERN_EMERG " [%08lx] ", addr);
 	i++;
 #endif
 }
@@ -137,8 +137,8 @@
 		if (stack + 1 + i > endstack)
 			break;
 		if (i % 8 == 0)
-			printk("\n" KERN_EMERG "       ");
-		printk(" %08lx", *(stack + i));
+			printk(KERN_EMERG "       ");
+		printk(KERN_CONT " %08lx", *(stack + i));
 	}
 	printk("\n");
 	i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845..2db722d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@
 config GENERIC_GPIO
 	def_bool y
 
+config GENERIC_CSUM
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612a..6d2e1d4 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_ATOMIC_H
 #define _ASM_MICROBLAZE_ATOMIC_H
 
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = (i))
-
-#define atomic_inc(v)		(atomic_add_return(1, (v)))
-#define atomic_dec(v)		(atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v)	(atomic_add_return(i, (v)))
-#define atomic_sub(i, v)	(atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v)	(atomic_add_return(1, (v)))
-#define atomic_dec_return(v)	(atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v)	(atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*addr &= ~mask;
-	local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@
 	return res;
 }
 
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd..a72468f 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
 #include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdd..b12fd89 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
 #include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593..61791e1 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
-	/* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b..128bf03 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
 #ifndef _ASM_MICROBLAZE_CHECKSUM_H
 #define _ASM_MICROBLAZE_CHECKSUM_H
 
-#include <linux/in6.h>
-
 /*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@
 	return sum;
 }
 
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
-								__wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 0000000..3a4988e
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b0..41e1e1a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
 #ifndef _ASM_MICROBLAZE_HARDIRQ_H
 #define _ASM_MICROBLAZE_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
 void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b2..ec34c76 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426 /* For debugging only */
-#define TIOCSBRK	0x5427 /* BSD compatibility */
-#define TIOCCBRK	0x5428 /* BSD compatibility */
-#define TIOCGSID	0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK	_IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR	0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D /* read serial port inline interrupt counts */
-
-#define	FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		0
-#define TIOCPKT_FLUSHREAD	1
-#define TIOCPKT_FLUSHWRITE	2
-#define TIOCPKT_STOP		4
-#define TIOCPKT_START		8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa4..84c7e51 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515de..90f0505 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
 #define _ASM_MICROBLAZE_IRQ_H
 
 #define NR_IRQS 32
+#include <asm-generic/irq.h>
 
 #include <linux/interrupt.h>
 
@@ -17,11 +18,6 @@
 
 #define NO_IRQ (-1)
 
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b13..8eebf89 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
 #include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100 /* stack-like segment */
-#define MAP_DENYWRITE	0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000 /* mark it as an executable */
-#define MAP_LOCKED	0x2000 /* pages are locked */
-#define MAP_NORESERVE	0x4000 /* don't check for reservations */
-#define MAP_POPULATE	0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000 /* do not block on IO */
-
-#define MCL_CURRENT	1 /* lock all current mappings */
-#define MCL_FUTURE	2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a..8d6a654 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 # ifndef CONFIG_MMU
-#  ifndef __ASSEMBLY__
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-#  endif /* __ASSEMBLY__ */
+#  include <asm-generic/mmu.h>
 # else /* CONFIG_MMU */
 #  ifdef __KERNEL__
 #   ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed1..24eab16 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_MMU
 # include "mmu_context_mm.h"
 #else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
 #endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba55671..0000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a..7be1347 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_MICROBLAZE_MODULE_H
 #define _ASM_MICROBLAZE_MODULE_H
 
+#include <asm-generic/module.h>
+
 /* Microblaze Relocations */
 #define R_MICROBLAZE_NONE 0
 #define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
 /* Keep this the last entry. */
 #define R_MICROBLAZE_NUM 11
 
-struct mod_arch_specific {
-	int foo;
-};
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
 typedef struct { volatile int counter; } module_t;
 
 #endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd970..809134c 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime; /* last msgsnd time */
-	unsigned long __unused1;
-	__kernel_time_t msg_rtime; /* last msgrcv time */
-	unsigned long __unused2;
-	__kernel_time_t msg_ctime; /* last change time */
-	unsigned long __unused3;
-	unsigned long msg_cbytes; /* current number of bytes on queue */
-	unsigned long msg_qnum; /* number of messages in queue */
-	unsigned long msg_qbytes; /* max number of bytes on queue */
-	__kernel_pid_t msg_lspid; /* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid; /* last receive pid */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a4..965d454 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 0000000..cf252af
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794..9f0df5f 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b2..0e15039 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
 #define _ASM_MICROBLAZE_POSIX_TYPES_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned int	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char 		*__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
+#define __kernel_mode_t __kernel_mode_t
 
-typedef unsigned int	__kernel_old_uid_t;
-typedef unsigned int	__kernel_old_gid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	(!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
 
 #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d0..35d786f 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	dma_addr_t	dma_address;
-	unsigned int	offset;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed7..7673b83 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime; /* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime; /* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems; /* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8c..a0cb0ca 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c58..83c05fc 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm; /* operation perms */
-	size_t			shm_segsz; /* size of segment (bytes) */
-	__kernel_time_t		shm_atime; /* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime; /* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime; /* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid; /* pid of creator */
-	__kernel_pid_t		shm_lpid; /* pid of last operator */
-	unsigned long		shm_nattch; /* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b..93f30de 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA	PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911..0815d29 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
 #include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc226..7b1573c 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *	Yasushi SHOJI <yashi@atmark-techno.com>
- *	Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP		1
-#define SIGINT		2
-#define SIGQUIT		3
-#define SIGILL		4
-#define SIGTRAP		5
-#define SIGABRT		6
-#define SIGIOT		6
-#define SIGBUS		7
-#define SIGFPE		8
-#define SIGKILL		9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#  ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-#  define _NSIG		64
-#  define _NSIG_BPW	32
-#  define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#  include <asm/sigcontext.h>
-#  undef __HAVE_ARCH_SIG_BITOPS
-
-#  define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#  else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#  define NSIG		32
-typedef unsigned long sigset_t;
-
-struct sigaction {
-	union {
-	__sighandler_t _sa_handler;
-	void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#  define sa_handler	_u._sa_handler
-#  define sa_sigaction	_u._sa_sigaction
-
-#  endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 8259368..6b71384 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a..def6d47 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f775..3dc90fa 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned long	st_rdev;
-	unsigned long	__pad1;
-	long		st_size;
-	int		st_blksize;
-	int		__pad2;
-	long		st_blocks;
-	int		st_atime;
-	unsigned int	st_atime_nsec;
-	int		st_mtime;
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;
-	unsigned int	st_ctime_nsec;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;		/* Device.  */
-	unsigned long long	st_ino;		/* File serial number.  */
-	unsigned int		st_mode;	/* File mode.  */
-	unsigned int		st_nlink;	/* Link count.  */
-	unsigned int		st_uid;		/* User ID of the file's owner.  */
-	unsigned int		st_gid;		/* Group ID of the file's group. */
-	unsigned long long	st_rdev;	/* Device number, if device.  */
-	unsigned long long	__pad1;
-	long long		st_size;	/* Size of file, in bytes.  */
-	int			st_blksize;	/* Optimal block size for I/O.  */
-	int			__pad2;
-	long long		st_blocks;	/* Number 512-byte blocks allocated. */
-	int			st_atime;	/* Time of last access.  */
-	unsigned int		st_atime_nsec;
-	int			st_mtime;	/* Time of last modification.  */
-	unsigned int		st_mtime_nsec;
-	int			st_ctime;	/* Time of last status change.  */
-	unsigned int		st_ctime_nsec;
-	unsigned int		__unused4;
-	unsigned int		__unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b..7847e56 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb..720761c 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
 #ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
 
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
 
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
-				int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
 
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
-			char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e3088..b1ed615 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
 #include <asm/setup.h>
 #include <asm/irqflags.h>
 
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
 struct task_struct;
 struct thread_info;
 
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc..3935b10 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-	speed_t c_ispeed; /* input speed */
-	speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define NL0	0000000
-#define NL1	0000400
-#define CRDLY	0003000
-#define CR0	0000000
-#define CR1	0001000
-#define CR2	0002000
-#define CR3	0003000
-#define TABDLY	0014000
-#define TAB0	0000000
-#define TAB1	0004000
-#define TAB2	0010000
-#define TAB3	0014000
-#define XTABS	0014000
-#define BSDLY	0020000
-#define BS0	0000000
-#define BS1	0020000
-#define VTDLY	0040000
-#define VT0	0000000
-#define VT1	0040000
-#define FFDLY	0100000
-#define FF0	0000000
-#define FF1	0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD	0010017
-#define B0	0000000 /* hang up */
-#define B50	0000001
-#define B75	0000002
-#define B110	0000003
-#define B134	0000004
-#define B150	0000005
-#define B200	0000006
-#define B300	0000007
-#define B600	0000010
-#define B1200	0000011
-#define B1800	0000012
-#define B2400	0000013
-#define B4800	0000014
-#define B9600	0000015
-#define B19200	0000016
-#define B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define CS5	0000000
-#define CS6	0000020
-#define CS7	0000040
-#define CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX	0010000
-#define B57600	0010001
-#define B115200	0010002
-#define B230400	0010003
-#define B460800	0010004
-#define B500000	0010005
-#define B576000	0010006
-#define B921600	0010007
-#define BOTHER		0010000
-#define B1000000	0010010
-#define B1152000	0010011
-#define B1500000	0010012
-#define B2000000	0010013
-#define B2500000	0010014
-#define B3000000	0010015
-#define B3500000	0010016
-#define B4000000	0010017
-#define CIBAUD		002003600000 /* input baud rate (not used) */
-#define CMSPAR		010000000000 /* mark or space (stick) parity */
-#define CRTSCTS		020000000000 /* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1..280d78a 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag; /* input mode flags */
-	unsigned short c_oflag; /* output mode flags */
-	unsigned short c_cflag; /* control mode flags */
-	unsigned short c_lflag; /* local mode flags */
-	unsigned char c_line; /* line discipline */
-	unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6 /* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA		11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12 /* SMS block mode - for talking to GSM data cards
-				about SMS messages */
-#define N_HDLC		13 /* synchronous HDLC */
-#define N_SYNC_PPP	14
-#define N_HCI		15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525d..befcf3d 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
 #ifndef _ASM_MICROBLAZE_TIMEX_H
 #define _ASM_MICROBLAZE_TIMEX_H
 
+#include <asm-generic/timex.h>
+
 #define CLOCK_TICK_RATE 1000 /* Timer input freq. */
 
-typedef unsigned long cycles_t;
-
-#define get_cycles()	(0)
-
 #endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018..b9e79bc 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#  ifdef __KERNEL__
-#  define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#  endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3..9bc07b9 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long		uc_flags;
-	struct ucontext		*uc_link;
-	stack_t			uc_stack;
-	struct sigcontext	uc_mcontext;
-	sigset_t		uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5f..0b85232 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
 #define __NR_accept04		362 /* new */
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
+#define __NR_rt_tgsigqueueinfo	365 /* new */
+#define __NR_perf_counter_open	366 /* new */
 
-#define __NR_syscalls		365
+#define __NR_syscalls		367
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /*
  * "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b13789..89d82fd 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b8..9083d85 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@
 	rtid	r14, 0
 	nop
 
-sys_vfork_wrapper:
-	brid	sys_vfork
+sys_vfork:
+	brid	microblaze_vfork
 	addk	r5, r1, r0
 
-sys_clone_wrapper:
-	brid	sys_clone
+sys_clone:
+	brid	microblaze_clone
 	addk	r7, r1, r0
 
-sys_execve_wrapper:
-	brid	sys_execve
+sys_execve:
+	brid	microblaze_execve
 	addk	r8, r1, r0
 
-sys_sigreturn_wrapper:
-	brid	sys_sigreturn
-	addk	r5, r1, r0
-
 sys_rt_sigreturn_wrapper:
 	brid	sys_rt_sigreturn
 	addk	r5, r1, r0
 
-sys_sigsuspend_wrapper:
-	brid	sys_rt_sigsuspend
-	addk	r6, r1, r0
-
 sys_rt_sigsuspend_wrapper:
 	brid	sys_rt_sigsuspend
 	addk	r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b..c7353e7 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@
 	brid	ret_from_trap;	/* Do normal trap return */
 	nop;
 
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+	brid	microblaze_vfork	/* Do real work (tail-call) */
 	la	r5, r1, PTO
-	brid	sys_vfork	/* Do real work (tail-call) */
-	nop
 
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
 	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
 	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
 1:	la	r7, r1, PTO;			/* Arg 2: parent context */
@@ -444,20 +443,9 @@
 	brid	do_fork		/* Do real work (tail-call) */
 	nop;
 
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
 	la	r8, r1, PTO;		/* add user context as 4th arg */
-	brid	sys_execve;	/* Do real work (tail-call).*/
-	nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r6, r1, PTO;		/* add user context as 2nd arg */
-	bralid	r15, sys_sigsuspend; /* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
+	brid	microblaze_execve;	/* Do real work (tail-call).*/
 	nop;
 
 C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@
 	bri ret_from_trap /* fall through will not work here due to align */
 	nop;
 
-
-C_ENTRY(sys_sigreturn_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r5, r1, PTO;		/* add user context as 1st arg */
-	brlid	r15, sys_sigreturn;	/* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e652..493819c 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -45,91 +45,8 @@
 
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
 
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-			__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-			__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-			__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-			__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
+asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
 {
@@ -139,7 +56,6 @@
 /*
  * Do a signal return; undo the signal stack.
  */
-
 struct sigframe {
 	struct sigcontext sc;
 	unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +92,7 @@
 	return err;
 }
 
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame =
-			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-		|| (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-					sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +207,17 @@
 	/* Set up to return from userspace. If provided, use a stub
 	 already in userspace. */
 	/* minus 8 is offset to cater for "rtsd r15,8" */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
+	/* addi r12, r0, __NR_sigreturn */
+	err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+			frame->tramp + 0);
+	/* brki r14, 0x8 */
+	err |= __put_user(0xb9cc0008, frame->tramp + 1);
 
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
+	/* Return from sighandler will jump to the tramp.
+	 Negative 8 offset because return is rtsd r15, 8 */
+	regs->r15 = ((unsigned long)frame->tramp)-8;
 
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
+	__invalidate_cache_sigtramp((unsigned long)frame->tramp);
 
 	if (err)
 		goto give_sigsegv;
@@ -405,7 +284,7 @@
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
@@ -426,6 +305,7 @@
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
+	return 1;
 }
 
 /*
@@ -456,7 +336,9 @@
 	if (kernel_mode(regs))
 		return 1;
 
-	if (!oldset)
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +346,31 @@
 		/* Whee! Actually deliver the signal. */
 		if (in_syscall)
 			handle_restart(regs, &ka, 1);
-		handle_signal(signr, &ka, &info, oldset, regs);
+		if (handle_signal(signr, &ka, &info, oldset, regs)) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &=
+			    ~TS_RESTORE_SIGMASK;
+		}
 		return 1;
 	}
 
 	if (in_syscall)
 		handle_restart(regs, NULL, 0);
 
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
 	/* Did we come from a system call? */
 	return 0;
 }
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff..8c9ebac 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -39,7 +39,7 @@
  *
  * This is really horribly ugly. This will be remove with new toolchain.
  */
-asmlinkage int
+asmlinkage long
 sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 {
 	int version, ret;
@@ -134,20 +134,20 @@
 	return ret;
 }
 
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
 						regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
 {
 	if (!stack)
 		stack = regs->r1;
 	return do_fork(flags, stack, regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
 			char __user *__user *envp, struct pt_regs *regs)
 {
 	int error;
@@ -163,8 +163,8 @@
 	return error;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
@@ -189,18 +189,18 @@
 	return ret;
 }
 
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset)
+			unsigned long fd, off_t pgoff)
 {
 	int err = -EINVAL;
 
-	if (offset & ~PAGE_MASK) {
+	if (pgoff & ~PAGE_MASK) {
 		printk(KERN_INFO "no pagemask in mmap\r\n");
 		goto out;
 	}
 
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 out:
 	return err;
 }
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d178..31b32a6 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@
 	.long sys_creat
 	.long sys_link
 	.long sys_unlink		/* 10 */
-	.long sys_execve_wrapper
+	.long sys_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
@@ -71,12 +71,12 @@
 	.long sys_getppid
 	.long sys_getpgrp		/* 65 */
 	.long sys_setsid
-	.long sys_sigaction
+	.long sys_ni_syscall		/* sys_sigaction */
 	.long sys_sgetmask
 	.long sys_ssetmask
 	.long sys_setreuid		/* 70 */
 	.long sys_setregid
-	.long sys_sigsuspend_wrapper
+	.long sys_ni_syscall		/* sys_sigsuspend_wrapper */
 	.long sys_sigpending
 	.long sys_sethostname
 	.long sys_setrlimit		/* 75 */
@@ -123,8 +123,8 @@
 	.long sys_sysinfo
 	.long sys_ipc
 	.long sys_fsync
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		/* 120 */
+	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
+	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
 	.long sys_ni_syscall		/* modify_ldt */
@@ -194,7 +194,7 @@
 	.long sys_sendfile
 	.long sys_ni_syscall		/* reserved for streams1 */
 	.long sys_ni_syscall		/* reserved for streams2 */
-	.long sys_vfork_wrapper		/* 190 */
+	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
 	.long sys_mmap2			/* mmap2 */
 	.long sys_truncate64
@@ -369,3 +369,5 @@
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_ni_syscall
+	.long sys_rt_tgsigqueueinfo	/* 365 */
+	.long sys_perf_counter_open
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6..b579db0 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile
 #
 
-lib-y :=  memset.o checksum.o
+lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
 lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e745..0000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc
- *		choose these registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
-	unsigned int sum = (__force unsigned int)wsum;
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += sum;
-	if (sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-						__wsum sum, int *csum_err)
-{
-	int missing;
-
-	missing = __copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*csum_err = -EFAULT;
-	} else
-		*csum_err = 0;
-
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701c..8d92c4e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@
 			memory_size = memory_end - memory_start;
 			PAGE_OFFSET = memory_start;
 			printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
-				"size 0x%08x\n", __func__, memory_start,
-						memory_end, memory_size);
+				"size 0x%08x\n", __func__, (u32) memory_start,
+					(u32) memory_end, (u32) memory_size);
 			break;
 		}
 	}
 
 	if (!memory_start || !memory_end) {
 		panic("%s: Missing memory setting 0x%08x-0x%08x\n",
-			__func__, memory_start, memory_end);
+			__func__, (u32) memory_start, (u32) memory_end);
 	}
 
 	/* reservation of region where is the kernel */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f..3ca0fe1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
+config AR7
+	bool "Texas Instruments AR7"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select NO_EXCEPT_FILL
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_GPIO
+	select GCD
+	select VLYNQ
+	help
+	  Support for the Texas Instruments AR7 System-on-a-Chip
+	  family: TNETD7100, 7200 and 7300.
+
 config BASLER_EXCITE
 	bool "Basler eXcite smart camera"
 	select CEVT_R4K
@@ -209,7 +229,7 @@
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
+	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -247,6 +267,7 @@
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
 	bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
-	select SYNC_R4K if BROKEN
+	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select WEAK_ORDERING
@@ -2147,11 +2168,11 @@
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 source "kernel/power/Kconfig"
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a..861da51 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@
 #
 
 #
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7)		+= arch/mips/ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
+
+#
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 0000000..7435e44
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,10 @@
+
+obj-y := \
+	prom.o \
+	setup.o \
+	memory.o \
+	irq.o \
+	time.o \
+	platform.o \
+	gpio.o \
+	clock.o
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 0000000..27dc666
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK	0x3
+#define CPU_PLL_SOURCE_SHIFT	16
+#define BUS_PLL_SOURCE_SHIFT	14
+#define USB_PLL_SOURCE_SHIFT	18
+#define DSP_PLL_SOURCE_SHIFT	22
+#define BOOT_PLL_SOURCE_AFE	0
+#define BOOT_PLL_SOURCE_BUS	0
+#define BOOT_PLL_SOURCE_REF	1
+#define BOOT_PLL_SOURCE_XTAL	2
+#define BOOT_PLL_SOURCE_CPU	3
+#define BOOT_PLL_BYPASS		0x00000020
+#define BOOT_PLL_ASYNC_MODE	0x02000000
+#define BOOT_PLL_2TO1_MODE	0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU	0
+#define TNETD7200_CLOCK_ID_DSP	1
+#define TNETD7200_CLOCK_ID_USB	2
+
+#define TNETD7200_DEF_CPU_CLK	211000000
+#define TNETD7200_DEF_DSP_CLK	125000000
+#define TNETD7200_DEF_USB_CLK	48000000
+
+struct tnetd7300_clock {
+	u32 ctrl;
+#define PREDIV_MASK	0x001f0000
+#define PREDIV_SHIFT	16
+#define POSTDIV_MASK	0x0000001f
+	u32 unused1[3];
+	u32 pll;
+#define MUL_MASK	0x0000f000
+#define MUL_SHIFT	12
+#define PLL_MODE_MASK	0x00000001
+#define PLL_NDIV	0x00000800
+#define PLL_DIV		0x00000002
+#define PLL_STATUS	0x00000001
+	u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+	struct tnetd7300_clock bus;
+	struct tnetd7300_clock cpu;
+	struct tnetd7300_clock usb;
+	struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+	u32 ctrl;
+	u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+	u32 mul;
+	u32 prediv;
+	u32 postdiv;
+	u32 postdiv2;
+	u32 unused2[6];
+	u32 cmd;
+	u32 status;
+	u32 cmden;
+	u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+	struct tnetd7200_clock cpu;
+	struct tnetd7200_clock dsp;
+	struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+			int *postdiv, int *mul)
+{
+	int i, j, k, freq, res = target;
+	for (i = 1; i <= 16; i++)
+		for (j = 1; j <= 32; j++)
+			for (k = 1; k <= 32; k++) {
+				freq = abs(base / j * i / k - target);
+				if (freq < res) {
+					res = freq;
+					*mul = i;
+					*prediv = j;
+					*postdiv = k;
+				}
+			}
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+	int *mul)
+{
+	int tmp_gcd, tmp_base, tmp_freq;
+
+	for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+		tmp_base = base / *prediv;
+		tmp_gcd = gcd(target, tmp_base);
+		*mul = target / tmp_gcd;
+		*postdiv = tmp_base / tmp_gcd;
+		if ((*mul < 1) || (*mul >= 16))
+			continue;
+		if ((*postdiv > 0) & (*postdiv <= 32))
+			break;
+	}
+
+	if (base / *prediv * *mul / *postdiv != target) {
+		approximate(base, target, prediv, postdiv, mul);
+		tmp_freq = base / *prediv * *mul / *postdiv;
+		printk(KERN_WARNING
+		       "Adjusted requested frequency %d to %d\n",
+		       target, tmp_freq);
+	}
+
+	printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+	       *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+	u32 didr1, didr2;
+	u8 rev = ar7_chip_rev();
+	didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+	didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+	if (didr2 & (1 << 23))
+		return 0;
+	if ((rev >= 0x23) && (rev != 0x57))
+		return 250000000;
+	if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+	    > 4208000)
+		return 250000000;
+	return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int product;
+	int base_clock = AR7_REF_CLOCK;
+	u32 ctrl = readl(&clock->ctrl);
+	u32 pll = readl(&clock->pll);
+	int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+	int postdiv = (ctrl & POSTDIV_MASK) + 1;
+	int divisor = prediv * postdiv;
+	int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base_clock / divisor;
+
+	if ((pll & PLL_MODE_MASK) == 0)
+		return (base_clock >> (mul / 16 + 1)) / divisor;
+
+	if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+		product = (mul & 1) ?
+			(base_clock * mul) >> 1 :
+			(base_clock * (mul - 1)) >> 2;
+		return product / divisor;
+	}
+
+	if (mul == 16)
+		return base_clock / divisor;
+
+	return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 frequency)
+{
+	int prediv, postdiv, mul;
+	int base_clock = ar7_bus_clock;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = ar7_bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+	msleep(1);
+	writel(4, &clock->pll);
+	while (readl(&clock->pll) & PLL_STATUS)
+		;
+	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+	msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7300_clocks *clocks =
+					ioremap_nocache(UR8_REGS_CLOCKS,
+					sizeof(struct tnetd7300_clocks));
+
+	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+		&clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
+	else
+		ar7_cpu_clock = ar7_bus_clock;
+
+	if (ar7_dsp_clock == 250000000)
+		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+			bootcr, ar7_dsp_clock);
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
+		((readl(&clock->postdiv) & 0x1f) + 1);
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base / divisor;
+
+	return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+	int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+	printk(KERN_INFO
+		"Clocks: base = %d, frequency = %u, prediv = %d, "
+		"postdiv = %d, postdiv2 = %d, mul = %d\n",
+		base, frequency, prediv, postdiv, postdiv2, mul);
+
+	writel(0, &clock->ctrl);
+	writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+	writel((mul - 1) & 0xF, &clock->mul);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		/* Async */
+		switch (clock_id) {
+		case TNETD7200_CLOCK_ID_DSP:
+			return AR7_REF_CLOCK;
+		default:
+			return AR7_AFE_CLOCK;
+		}
+	else
+		/* Sync */
+		if (*bootcr & BOOT_PLL_2TO1_MODE)
+			/* 2:1 */
+			switch (clock_id) {
+			case TNETD7200_CLOCK_ID_DSP:
+				return AR7_REF_CLOCK;
+			default:
+				return AR7_AFE_CLOCK;
+			}
+		else
+			/* 1:1 */
+			return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7200_clocks *clocks =
+					ioremap_nocache(AR7_REGS_CLOCKS,
+					sizeof(struct tnetd7200_clocks));
+	int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+	int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+	int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+	cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+	dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+		printk(KERN_INFO "Clocks: Async mode\n");
+
+		printk(KERN_INFO "Clocks: Setting DSP clock\n");
+		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+			&dsp_prediv, &dsp_postdiv, &dsp_mul);
+		ar7_bus_clock =
+			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+		tnetd7200_set_clock(dsp_base, &clocks->dsp,
+			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+			ar7_bus_clock);
+
+		printk(KERN_INFO "Clocks: Setting CPU clock\n");
+		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+			&cpu_postdiv, &cpu_mul);
+		ar7_cpu_clock =
+			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+		tnetd7200_set_clock(cpu_base, &clocks->cpu,
+			cpu_prediv, cpu_postdiv, -1, cpu_mul,
+			ar7_cpu_clock);
+
+	} else
+		if (*bootcr & BOOT_PLL_2TO1_MODE) {
+			printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting CPU clock\n");
+			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+				&cpu_postdiv, &cpu_mul);
+			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+								/ cpu_postdiv;
+			tnetd7200_set_clock(cpu_base, &clocks->cpu,
+				cpu_prediv, cpu_postdiv, -1, cpu_mul,
+				ar7_cpu_clock);
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ar7_cpu_clock / 2;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+		} else {
+			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+								/ dsp_postdiv;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+
+			ar7_cpu_clock = ar7_bus_clock;
+		}
+
+	printk(KERN_INFO "Clocks: Setting USB clock\n");
+	usb_base = ar7_bus_clock;
+	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+		&usb_postdiv, &usb_mul);
+	tnetd7200_set_clock(usb_base, &clocks->usb,
+		usb_prediv, usb_postdiv, -1, usb_mul,
+		TNETD7200_DEF_USB_CLK);
+
+	ar7_dsp_clock = ar7_cpu_clock;
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+	switch (ar7_chip_id()) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		tnetd7200_init_clocks();
+		break;
+	case AR7_CHIP_7300:
+		ar7_dsp_clock = tnetd7300_dsp_clock();
+		tnetd7300_init_clocks();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 0000000..74e14a3
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	if (ar7_gpio_list[gpio])
+		return -EBUSY;
+
+	if (label)
+		ar7_gpio_list[gpio] = label;
+	else
+		ar7_gpio_list[gpio] = "busy";
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	BUG_ON(!ar7_gpio_list[gpio]);
+	ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 0000000..c781556
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET	0x80
+#define PACE_OFFSET	0xA0
+#define CHNLS_OFFSET	0x200
+
+#define REG_OFFSET(irq, reg)	((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg)	(EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET		(SEC_REG_OFFSET(0))	/* 0x80 */
+#define CR_OFFSET(irq)		(REG_OFFSET(irq, 1))	/* 0x10 */
+#define SEC_CR_OFFSET		(SEC_REG_OFFSET(1))	/* 0x88 */
+#define ESR_OFFSET(irq)		(REG_OFFSET(irq, 2))	/* 0x20 */
+#define SEC_ESR_OFFSET		(SEC_REG_OFFSET(2))	/* 0x90 */
+#define ECR_OFFSET(irq)		(REG_OFFSET(irq, 3))	/* 0x30 */
+#define SEC_ECR_OFFSET		(SEC_REG_OFFSET(3))	/* 0x98 */
+#define PIR_OFFSET		(0x40)
+#define MSR_OFFSET		(0x44)
+#define PM_OFFSET(irq)		(REG_OFFSET(irq, 5))	/* 0x50 */
+#define TM_OFFSET(irq)		(REG_OFFSET(irq, 6))	/* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_irq,
+	.mask = ar7_mask_irq,
+	.ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_sec_irq,
+	.mask = ar7_mask_sec_irq,
+	.ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+	.handler = no_action,
+	.name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+	int i;
+	/*
+	 * Disable interrupts and clear pending
+	 */
+	writel(0xffffffff, REG(ECR_OFFSET(0)));
+	writel(0xff, REG(ECR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_ECR_OFFSET));
+	writel(0xffffffff, REG(CR_OFFSET(0)));
+	writel(0xff, REG(CR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+	ar7_irq_base = base;
+
+	for (i = 0; i < 40; i++) {
+		writel(i, REG(CHNL_OFFSET(i)));
+		/* Primary IRQ's */
+		set_irq_chip_and_handler(base + i, &ar7_irq_type,
+					 handle_level_irq);
+		/* Secondary IRQ's */
+		if (i < 32)
+			set_irq_chip_and_handler(base + i + 40,
+						 &ar7_sec_irq_type,
+						 handle_level_irq);
+	}
+
+	setup_irq(2, &ar7_cascade_action);
+	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+	ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+	u32 status;
+	int i, irq;
+
+	/* Primary IRQ's */
+	irq = readl(REG(PIR_OFFSET)) & 0x3f;
+	if (irq) {
+		do_IRQ(ar7_irq_base + irq);
+		return;
+	}
+
+	/* Secondary IRQ's are cascaded through primary '0' */
+	writel(1, REG(CR_OFFSET(irq)));
+	status = readl(REG(SEC_SR_OFFSET));
+	for (i = 0; i < 32; i++) {
+		if (status & 1) {
+			do_IRQ(ar7_irq_base + i + 40);
+			return;
+		}
+		status >>= 1;
+	}
+
+	spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		ar7_cascade();
+	else
+		spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 0000000..46fed44
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+	u32 size = (64 << 20);
+	u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+	u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+	u32 *tmpaddr = addr;
+
+	while (tmpaddr > kernel_end) {
+		*tmpaddr = (u32)tmpaddr;
+		size >>= 1;
+		tmpaddr -= size >> 2;
+	}
+
+	do {
+		tmpaddr += size >> 2;
+		if (*tmpaddr != (u32)tmpaddr)
+			break;
+		size <<= 1;
+	} while (size < (64 << 20));
+
+	writel(tmpaddr, &addr);
+
+	return size;
+}
+
+void __init prom_meminit(void)
+{
+	unsigned long pages;
+
+	pages = memsize() >> PAGE_SHIFT;
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+			  BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 0000000..5422449
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+	struct plat_vlynq_ops ops;
+	int gpio_bit;
+	int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+	int result;
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+	result = gpio_request(pdata->gpio_bit, "vlynq");
+	if (result)
+		goto out;
+
+	ar7_device_reset(pdata->reset_bit);
+
+	result = ar7_gpio_disable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = ar7_gpio_enable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = gpio_direction_output(pdata->gpio_bit, 0);
+	if (result)
+		goto out_gpio_enabled;
+
+	msleep(50);
+
+	gpio_set_value(pdata->gpio_bit, 1);
+	msleep(50);
+
+	return 0;
+
+out_gpio_enabled:
+	ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+	ar7_device_disable(pdata->reset_bit);
+	gpio_free(pdata->gpio_bit);
+out:
+	return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+	ar7_gpio_disable(pdata->gpio_bit);
+	gpio_free(pdata->gpio_bit);
+	ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+	.name = "mem",
+	.flags = IORESOURCE_MEM,
+	.start = 0x10000000,
+	.end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC0,
+		.end = AR7_REGS_MAC0 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 27,
+		.end = 27,
+	},
+};
+
+static struct resource cpmac_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC1,
+		.end = AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 41,
+		.end = 41,
+	},
+};
+
+static struct resource vlynq_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ0,
+		.end = AR7_REGS_VLYNQ0 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 29,
+		.end = 29,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x04000000,
+		.end = 0x04ffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 80,
+		.end = 111,
+	},
+};
+
+static struct resource vlynq_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ1,
+		.end = AR7_REGS_VLYNQ1 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 33,
+		.end = 33,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x0c000000,
+		.end = 0x0cffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 112,
+		.end = 143,
+	},
+};
+
+static struct resource usb_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_USB,
+		.end = AR7_REGS_USB + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 32,
+		.end = 32,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x03400000,
+		.end = 0x034001fff,
+	},
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+	.reset_bit = 17,
+	.power_bit = 20,
+	.phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+	.reset_bit = 21,
+	.power_bit = 22,
+	.phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 20,
+	.gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 16,
+	.gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+	.id = 0,
+	.name = "physmap-flash",
+	.dev.platform_data = &physmap_flash_data,
+	.resource = &physmap_flash_resource,
+	.num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static struct platform_device cpmac_low = {
+	.id = 0,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_low_data,
+	},
+	.resource = cpmac_low_res,
+	.num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+	.id = 1,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_high_data,
+	},
+	.resource = cpmac_high_res,
+	.num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+	.id = 0,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_low_data,
+	.resource = vlynq_low_res,
+	.num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id = 1,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_high_data,
+	.resource = vlynq_high_res,
+	.num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+	{
+		.name = "status",
+		.gpio = 8,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dsl502t_leds[] = {
+	{
+		.name = "status",
+		.gpio = 9,
+		.active_low = 1,
+	},
+	{
+		.name = "ethernet",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "usb",
+		.gpio = 12,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dg834g_leds[] = {
+	{
+		.name = "ppp",
+		.gpio = 6,
+		.active_low = 1,
+	},
+	{
+		.name = "status",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "adsl",
+		.gpio = 8,
+		.active_low = 1,
+	},
+	{
+		.name = "wifi",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "power",
+		.gpio = 14,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+};
+
+static struct gpio_led fb_sl_leds[] = {
+	{
+		.name = "1",
+		.gpio = 7,
+	},
+	{
+		.name = "2",
+		.gpio = 13,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 10,
+		.active_low = 1,
+	},
+	{
+		.name = "4",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 9,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led fb_fon_leds[] = {
+	{
+		.name = "1",
+		.gpio = 8,
+	},
+	{
+		.name = "2",
+		.gpio = 3,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 5,
+	},
+	{
+		.name = "4",
+		.gpio = 4,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 11,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &ar7_led_data,
+	}
+};
+
+static struct platform_device ar7_udc = {
+	.id = -1,
+	.name = "ar7_udc",
+	.resource = usb_res,
+	.num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+	char *prid, *usb_prod;
+
+	/* Default LEDs	*/
+	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+	ar7_led_data.leds = default_leds;
+
+	/* FIXME: the whole thing is unreliable */
+	prid = prom_getenv("ProductID");
+	usb_prod = prom_getenv("usb_prod");
+
+	/* If we can't get the product id from PROM, use the default LEDs */
+	if (!prid)
+		return;
+
+	if (strstr(prid, "Fritz_Box_FON")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+		ar7_led_data.leds = fb_fon_leds;
+	} else if (strstr(prid, "Fritz_Box_")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+		ar7_led_data.leds = fb_sl_leds;
+	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+		ar7_led_data.leds = dsl502t_leds;
+	} else if (strstr(prid, "DG834")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+		ar7_led_data.leds = dg834g_leds;
+	}
+}
+
+static int __init ar7_register_devices(void)
+{
+	int res;
+	static struct uart_port uart_port[2];
+
+	memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+	uart_port[0].type = PORT_16550A;
+	uart_port[0].line = 0;
+	uart_port[0].irq = AR7_IRQ_UART0;
+	uart_port[0].uartclk = ar7_bus_freq() / 2;
+	uart_port[0].iotype = UPIO_MEM32;
+	uart_port[0].mapbase = AR7_REGS_UART0;
+	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+	uart_port[0].regshift = 2;
+	res = early_serial_setup(&uart_port[0]);
+	if (res)
+		return res;
+
+
+	/* Only TNETD73xx have a second serial port */
+	if (ar7_has_second_uart()) {
+		uart_port[1].type = PORT_16550A;
+		uart_port[1].line = 1;
+		uart_port[1].irq = AR7_IRQ_UART1;
+		uart_port[1].uartclk = ar7_bus_freq() / 2;
+		uart_port[1].iotype = UPIO_MEM32;
+		uart_port[1].mapbase = UR8_REGS_UART1;
+		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+		uart_port[1].regshift = 2;
+		res = early_serial_setup(&uart_port[1]);
+		if (res)
+			return res;
+	}
+
+	res = platform_device_register(&physmap_flash);
+	if (res)
+		return res;
+
+	ar7_device_disable(vlynq_low_data.reset_bit);
+	res = platform_device_register(&vlynq_low);
+	if (res)
+		return res;
+
+	if (ar7_has_high_vlynq()) {
+		ar7_device_disable(vlynq_high_data.reset_bit);
+		res = platform_device_register(&vlynq_high);
+		if (res)
+			return res;
+	}
+
+	if (ar7_has_high_cpmac()) {
+		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+		res = platform_device_register(&cpmac_high);
+		if (res)
+			return res;
+	} else {
+		cpmac_low_data.phy_mask = 0xffffffff;
+	}
+
+	cpmac_get_mac(0, cpmac_low_data.dev_addr);
+	res = platform_device_register(&cpmac_low);
+	if (res)
+		return res;
+
+	detect_leds();
+	res = platform_device_register(&ar7_gpio_leds);
+	if (res)
+		return res;
+
+	res = platform_device_register(&ar7_udc);
+
+	return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 0000000..a320bce
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+	char *name;
+	char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+	int i;
+	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+		if (!strcmp(name, adam2_env[i].name))
+			return adam2_env[i].value;
+
+	return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+static void  __init ar7_init_cmdline(int argc, char *argv[])
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while (actr < argc) {
+		strcpy(cp, argv[actr]);
+		cp += strlen(argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) {
+		/* get rid of trailing space */
+		--cp;
+		*cp = '\0';
+	}
+}
+
+struct psbl_rec {
+	u32 psbl_size;
+	u32 env_base;
+	u32 env_size;
+	u32 ffs_base;
+	u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+	u8 num;
+	u8 ctrl;
+	u16 csum;
+	u8 len;
+	char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+	u8 num;
+	char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+	{ 1, "cpufrequency" },
+	{ 2, "memsize" },
+	{ 3, "flashsize" },
+	{ 4, "modetty0" },
+	{ 5, "modetty1" },
+	{ 8, "maca" },
+	{ 9, "macb" },
+	{ 28, "sysfrequency" },
+	{ 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE  4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+	int i;
+
+	for (i = 0; i < sizeof(psp_var_map); i++)
+		if (psp_var_map[i].num == num)
+			return psp_var_map[i].value;
+
+	return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+	int i;
+	for (i = 0; i < MAX_ENTRY; i++) {
+		if (!adam2_env[i].name) {
+			adam2_env[i].name = name;
+			adam2_env[i].value = value;
+			return;
+		} else if (!strcmp(adam2_env[i].name, name)) {
+			adam2_env[i].value = value;
+			return;
+		}
+	}
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+	int i, n;
+	char *name, *value;
+	struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+	memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+	i = 1;
+	n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+	while (i < n) {
+		if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+			break;
+		value = chunks[i].data;
+		if (chunks[i].num) {
+			name = lookup_psp_var_map(chunks[i].num);
+		} else {
+			name = value;
+			value += strlen(name) + 1;
+		}
+		if (name)
+			add_adam2_var(name, value);
+		i += chunks[i].len;
+	}
+	return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+	int i;
+	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+	if (strcmp(psp_env, psp_env_version) == 0) {
+		parse_psp_env(psp_env);
+	} else {
+		for (i = 0; i < MAX_ENTRY; i++, env++)
+			if (env->name)
+				add_adam2_var(env->name, env->value);
+	}
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char console_string[40];
+	int baud = 0;
+	char parity = '\0', bits = '\0', flow = '\0';
+	char *s, *p;
+
+	if (strstr(prom_getcmdline(), "console="))
+		return;
+
+#ifdef CONFIG_KGDB
+	if (!strstr(prom_getcmdline(), "nokgdb")) {
+		strcat(prom_getcmdline(), " console=kgdb");
+		kgdb_enabled = 1;
+		return;
+	}
+#endif
+
+	s = prom_getenv("modetty0");
+	if (s) {
+		baud = simple_strtoul(s, &p, 10);
+		s = p;
+		if (*s == ',')
+			s++;
+		if (*s)
+			parity = *s++;
+		if (*s == ',')
+			s++;
+		if (*s)
+			bits = *s++;
+		if (*s == ',')
+			s++;
+		if (*s == 'h')
+			flow = 'r';
+	}
+
+	if (baud == 0)
+		baud = 38400;
+	if (parity != 'n' && parity != 'o' && parity != 'e')
+		parity = 'n';
+	if (bits != '7' && bits != '8')
+		bits = '8';
+
+	if (flow == 'r')
+		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+			parity, bits, flow);
+	else
+		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+			bits);
+	strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+	ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+	ar7_init_env((struct env_var *)fw_arg2);
+	console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+	return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+	while (!(serial_in(UART_LSR) & UART_LSR_DR))
+		;
+	return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+		;
+	serial_out(UART_TX, c);
+	return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 0000000..6ebb5f1
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,94 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+	u32 *softres_reg = ioremap(AR7_REGS_RESET +
+					  AR7_RESET_SOFTWARE, 1);
+	writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+	while (1)
+		;
+}
+
+static void ar7_machine_power_off(void)
+{
+	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+	u32 power_state = readl(power_reg) | (3 << 30);
+	writel(power_state, power_reg);
+	ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
+	case AR7_CHIP_7100:
+		return "TI AR7 (TNETD7100)";
+	case AR7_CHIP_7200:
+		return "TI AR7 (TNETD7200)";
+	default:
+		return "TI AR7 (Unknown)";
+	}
+}
+
+static int __init ar7_init_console(void)
+{
+	return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+	unsigned long io_base;
+
+	_machine_restart = ar7_machine_restart;
+	_machine_halt = ar7_machine_halt;
+	pm_power_off = ar7_machine_power_off;
+	panic_timeout = 3;
+
+	io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+	if (!io_base)
+		panic("Can't remap IO base!\n");
+	set_io_port_base(io_base);
+
+	prom_meminit();
+
+	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+					get_system_type(),
+		ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 0000000..a1fba89
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b..d6903c3 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@
 obj-y += octeon-memcpy.o
 
 obj-$(CONFIG_SMP)                     += smp.o
-obj-$(CONFIG_PCI)                     += pci-common.o
-obj-$(CONFIG_PCI)                     += pci.o
-obj-$(CONFIG_PCI)                     += pcie.o
-obj-$(CONFIG_PCI_MSI)                 += msi.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162..4b92bfc 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
 #include <dma-coherence.h>
 
 #ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 #endif
 
 #define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f8..0000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (octeon_pcibios_map_irq)
-		return octeon_pcibios_map_irq(dev, slot, pin);
-	else
-		panic("octeon_pcibios_map_irq doesn't point to a "
-		      "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	uint16_t config;
-	uint32_t dconfig;
-	int pos;
-	/*
-	 * Force the Cache line setting to 64 bytes. The standard
-	 * Linux bus scan doesn't seem to set it. Octeon really has
-	 * 128 byte lines, but Intel bridges get really upset if you
-	 * try and set values above 64 bytes. Value is specified in
-	 * 32bit words.
-	 */
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
-	/* Set latency timers for all devices */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
-	/* Enable reporting System errors and parity errors on all devices */
-	/* Enable parity checking and error reporting */
-	pci_read_config_word(dev, PCI_COMMAND, &config);
-	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	pci_write_config_word(dev, PCI_COMMAND, config);
-
-	if (dev->subordinate) {
-		/* Set latency timers on sub bridges */
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
-		/* More bridge error detection */
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-	}
-
-	/* Enable the PCIe normal error reporting */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-	if (pos) {
-		/* Update Device Control */
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-		/* Correctable Error Reporting */
-		config |= PCI_EXP_DEVCTL_CERE;
-		/* Non-Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_NFERE;
-		/* Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_FERE;
-		/* Unsupported Request */
-		config |= PCI_EXP_DEVCTL_URRE;
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-	}
-
-	/* Find the Advanced Error Reporting capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (pos) {
-		/* Clear Uncorrectable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				      &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				       dconfig);
-		/* Enable reporting of all uncorrectable errors */
-		/* Uncorrectable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-		/*
-		 * Leave severity at HW default. This only controls if
-		 * errors are reported as uncorrectable or
-		 * correctable, not if the error is reported.
-		 */
-		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-		/* Clear Correctable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-		/* Enable reporting of all correctable errors */
-		/* Correctable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-		/* Advanced Error Capabilities */
-		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-		/* ECRC Generation Enable */
-		if (config & PCI_ERR_CAP_ECRC_GENC)
-			config |= PCI_ERR_CAP_ECRC_GENE;
-		/* ECRC Check Enable */
-		if (config & PCI_ERR_CAP_ECRC_CHKC)
-			config |= PCI_ERR_CAP_ECRC_CHKE;
-		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-		/* Report all errors to the root complex */
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-				       PCI_ERR_ROOT_CMD_COR_EN |
-				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
-				       PCI_ERR_ROOT_CMD_FATAL_EN);
-		/* Clear the Root status register */
-		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-	}
-
-	return 0;
-}
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h
deleted file mode 100644
index 74ae799..0000000
--- a/arch/mips/cavium-octeon/pci-common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
-
-#include <linux/pci.h>
-
-/* Some PCI cards require delays when accessing config space. */
-#define PCI_CONFIG_SPACE_DELAY 10000
-
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
-   Octeon specific version pointed to by this variable. This function needs to
-   change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-
-/* The following defines are only used when octeon_dma_bar_type =
-   OCTEON_DMA_BAR_TYPE_BIG */
-#define OCTEON_PCI_BAR1_HOLE_BITS 5
-#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
-
-enum octeon_dma_bar_type {
-	OCTEON_DMA_BAR_TYPE_INVALID,
-	OCTEON_DMA_BAR_TYPE_SMALL,
-	OCTEON_DMA_BAR_TYPE_BIG,
-	OCTEON_DMA_BAR_TYPE_PCIE
-};
-
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
- */
-extern enum octeon_dma_bar_type octeon_dma_bar_type;
-
-#endif
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e14398..4eaec8b 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt buttons platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4f..0f1cd90 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LCD platform device.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd4..d3ce6fa 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef..691d620 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt MTD device.
  *
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b..3ab3989 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d..7cb51f5 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7..0162f9e 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt time initialization.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 0000000..dad5b67
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2f..6f9d085 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of WRPPMC UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 0000000..c3dc1a6
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+		    unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e..3af0b8f 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
 /*
  *  DS1287 timer functions.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128..7990694 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@
 extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
 extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
+#ifndef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(elf_regs, regs)			\
 	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
 #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4..36fd969 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
 #define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
 #define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
 
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
 #endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d..10292e3 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
 
+#if CONFIG_SMP
+#define GIC_NUM_INTRS			(24 + NR_CPUS * 2)
+#else
 #define GIC_NUM_INTRS			32
+#endif
 
 #define MSK(n) ((1 << (n)) - 1)
 #define REG32(addr)		(*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@
 
 extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
 
 #endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3a..250a240 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
 /*
  *  Galileo/Marvell GT641xx IRQ definitions.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 0000000..de71694
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE	0x14000000
+
+#define AR7_REGS_BASE	0x08610000
+
+#define AR7_REGS_MAC0	(AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO	(AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER	(AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0	(AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB	(AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET	(AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1	(AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT	(AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_SOFTWARE	0x4
+#define AR7_RESET_STATUS	0x8
+
+#define AR7_RESET_BIT_CPMAC_LO	17
+#define AR7_RESET_BIT_CPMAC_HI	21
+#define AR7_RESET_BIT_MDIO	22
+#define AR7_RESET_BIT_EPHY	26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT	0x0
+#define AR7_GPIO_OUTPUT	0x4
+#define AR7_GPIO_DIR	0x8
+#define AR7_GPIO_ENABLE	0xc
+
+#define AR7_CHIP_7100	0x18
+#define AR7_CHIP_7200	0x2b
+#define AR7_CHIP_7300	0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0	15
+#define AR7_IRQ_UART1	16
+
+/* Clocks */
+#define AR7_AFE_CLOCK	35328000
+#define AR7_REF_CLOCK	25000000
+#define AR7_XTAL_CLOCK	24000000
+
+struct plat_cpmac_data {
+	int reset_bit;
+	int power_bit;
+	u32 phy_mask;
+	char dev_addr[6];
+};
+
+struct plat_dsl_data {
+	int reset_bit_dsl;
+	int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+	return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+	return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+	return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+	return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+	return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		return 0;
+	case AR7_CHIP_7300:
+		return 1;
+	default:
+		return -ENXIO;
+	}
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) | (1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+	ar7_device_disable(bit);
+	ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) | (1 << bit), power_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) & ~(1 << bit), power_reg);
+	msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 0000000..cbe9c4f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+	void __iomem *gpio_in =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *gpio_out =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 0000000..39e9757
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 0000000..088f61f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 0000000..ac28f27
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x94000000UL
+#define PHYS_OFFSET		0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 0000000..f4862b5
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9a..9da9acf 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
  * Copyright (C) 1997 Cobalt Microserver
  * Copyright (C) 1997, 2003 Ralf Baechle
  * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
  */
 #ifndef _ASM_COBALT_IRQ_H
 #define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c552..f8afec3 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
new file mode 100644
index 0000000..6ac5d3e
--- /dev/null
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
+
+#include <linux/pci.h>
+
+/* Some PCI cards require delays when accessing config space. */
+#define PCI_CONFIG_SPACE_DELAY 10000
+
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+				     u8 slot, u8 pin);
+
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
+#define OCTEON_PCI_BAR1_HOLE_BITS 5
+#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
+
+enum octeon_dma_bar_type {
+	OCTEON_DMA_BAR_TYPE_INVALID,
+	OCTEON_DMA_BAR_TYPE_SMALL,
+	OCTEON_DMA_BAR_TYPE_BIG,
+	OCTEON_DMA_BAR_TYPE_PCIE
+};
+
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
+ */
+extern enum octeon_dma_bar_type octeon_dma_bar_type;
+
+#endif
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa7..96a14a4 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	/* avoid <linux/bootmem.h> include hell */			\
+	extern unsigned long min_low_pfn;				\
+									\
+	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
+})
 
 #elif defined(CONFIG_SPARSEMEM)
 
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d..910e71a 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
 
 #endif
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
 
 #define EF_R0			 0
 #define EF_R1			 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0..97c2f81 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@
 }
 #define __arch_swab32 __arch_swab32
 
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
@@ -50,6 +54,6 @@
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
 #endif /* CONFIG_CPU_MIPSR2 */
 #endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 4000501..b70c49f 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 329)
 #define __NR_preadv			(__NR_Linux + 330)
 #define __NR_pwritev			(__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
+#define __NR_perf_counter_open		(__NR_Linux + 333)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		331
+#define __NR_Linux_syscalls		333
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		331
+#define __NR_O32_Linux_syscalls		333
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -660,16 +662,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 288)
 #define __NR_preadv			(__NR_Linux + 289)
 #define __NR_pwritev			(__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
+#define __NR_perf_counter_open		(__NR_Linux + 292)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		290
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		290
+#define __NR_64_Linux_syscalls		292
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -972,16 +976,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 292)
 #define __NR_preadv			(__NR_Linux + 293)
 #define __NR_pwritev			(__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
+#define __NR_perf_counter_open		(__NR_Linux + 296)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		296
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		294
+#define __NR_N32_Linux_syscalls		296
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a..fcc6569 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
 /*
  *  capcella.h, Include file for ZAO Networks Capcella.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a..6a90bc1 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series General-purpose I/O Unit.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@
 	IRQ_SIGNAL_HOLD,
 } irq_signal_t;
 
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+				   irq_signal_t signal);
 
 typedef enum {
 	IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@
 extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
 
 typedef enum {
-	GPIO_DATA_LOW,
-	GPIO_DATA_HIGH,
-	GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-	GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
 	GPIO_PULL_DOWN,
 	GPIO_PULL_UP,
 	GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfb..b07f732 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df8..130d09d 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
 /*
  *  mpc30x.h, Include file for Victor MP-C303/304.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce..c231a3d 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series PCI Control Unit.
  *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e3..ca806bc 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4..c78e824 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
 /*
  *  tb0219.h, Include file for TANBAC TB0219.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Modified for TANBAC TB0219:
  *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dc..36f5f79 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
 /*
  *  tb0226.h, Include file for TANBAC TB0226.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be649..7b96a43 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7..ff44823 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@
 #define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest)				\
+({									\
+	int __res = 1;							\
+	elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk));		\
+	__res;								\
+})
+
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
@@ -110,9 +127,6 @@
 	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
 void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45e..6996da4 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
 /*
  *  DS1287 clockevent driver
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787f..92351e0 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx clockevent routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48..23da108 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
 /*
  *  DEC I/O ASIC's counter clocksource
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f1..d2072cd 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 	return 0;
 }
 
@@ -120,8 +118,7 @@
 #endif
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 
 	if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
 		if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 }
 
 #ifdef CONFIG_SMP
@@ -254,6 +247,10 @@
 		if (cpu == X)
 			continue;
 
+		if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+					_intrmap[i].ipiflag == 0)
+			continue;
+
 		setup_intr(_intrmap[i].intrnum,
 				_intrmap[i].cpunum,
 				_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b13..ebcc5f7 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx IRQ routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9b..20a86e0 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,8 @@
 	sys	sys_inotify_init1	1
 	sys	sys_preadv		6	/* 4330 */
 	sys	sys_pwritev		6
+	sys	sys_rt_tgsigqueueinfo	4
+	sys	sys_perf_counter_open	5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6..b046130 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,6 @@
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev			/* 5390 */
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672..15874f9 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,6 @@
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
+	PTR	sys_perf_counter_open
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2..781e0f1 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,6 @@
 	PTR	sys_inotify_init1
 	PTR	compat_sys_preadv		/* 4330 */
 	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be06..ad0ff5d 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
-	cpumask_t cpu_allow_map;
-	char buf[256];
-	int len;
-
-	cpus_clear(cpu_allow_map);
-	if (cpulist_parse(str, &cpu_allow_map) == 0) {
-		cpu_set(0, cpu_allow_map);
-		cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
-		len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
-		buf[len] = '\0';
-		pr_debug("Allowable CPUs: %s\n", buf);
-		return 1;
-	} else
-		return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
 
 static void ipi_call_function(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_call_int_xlate(cpu));
 }
 
 
 static void ipi_resched(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
 }
 
 /*
@@ -206,7 +150,7 @@
 			   (unsigned long)(gp + sizeof(struct thread_info)));
 #endif
 
-	amon_cpu_start(cpu, pc, sp, gp, a0);
+	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
 }
 
 /*
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108..05dd170 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
 /*
  * Count register synchronisation.
  *
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
  * value. This can cause a small timewarp for CPU0. All other CPU's should
  * not have done anything significant (but they may have had interrupts
  * enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
 
+#include <asm/r4k-timer.h>
 #include <asm/atomic.h>
 #include <asm/barrier.h>
-#include <asm/cpumask.h>
 #include <asm/mipsregs.h>
 
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
 {
 	int i;
 	unsigned long flags;
@@ -42,19 +43,20 @@
 	return;
 #endif
 
-	pr_info("Checking COUNT synchronization across %u CPUs: ",
-		num_online_cpus());
+	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+	       num_online_cpus());
 
 	local_irq_save(flags);
 
 	/*
 	 * Notify the slaves that it's time to start
 	 */
+	atomic_set(&count_reference, read_c0_count());
 	atomic_set(&count_start_flag, 1);
 	smp_wmb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to current timer for all CPU's */
+	initcount = read_c0_count();
 
 	/*
 	 * We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@
 	printk("done.\n");
 }
 
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
 {
 	int i;
 	unsigned long flags;
@@ -131,8 +133,8 @@
 	while (!atomic_read(&count_start_flag))
 		mb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to next expire for all CPU's */
+	initcount = atomic_read(&count_reference);
 
 	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@
 	local_irq_restore(flags);
 }
 #undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42..07b9ec2 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1387,7 +1387,7 @@
 	return len;
 
 out_einval:
-	return -EINVAL;;
+	return -EINVAL;
 }
 
 static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a..27c807b6 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 
+#include <asm/gcmpregs.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@
 
 void __init prom_init(void)
 {
+	int result;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+	/* Early detection of CMP support */
+	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
 #ifdef CONFIG_MIPS_CMP
-	register_smp_ops(&cmp_smp_ops);
+	if (result)
+		register_smp_ops(&cmp_smp_ops);
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+	if (!result)
+		register_smp_ops(&vsmp_smp_ops);
+#else
 	register_smp_ops(&vsmp_smp_ops);
 #endif
+#endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);
 #endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf13..a8756f8 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,21 @@
 	.flags		= IRQF_DISABLED|IRQF_PERCPU,
 	.name		= "IPI_call"
 };
+
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+	return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+	return GIC_RESCHED_INT(cpu);
+}
 #endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
@@ -370,7 +385,7 @@
  * Interrupts and CPUs/Core Interrupts. The nature of the External
  * Interrupts is also defined here - polarity/trigger.
  */
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
@@ -387,21 +402,14 @@
 	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+/* This is the end of the general interrupts now we do IPI ones */
 };
 #endif
 
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -416,28 +424,36 @@
 }
 
 #if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+	int intr = baseintr + cpu;
+	gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+	gic_intr_map[intr].cpunum = cpu;
+	gic_intr_map[intr].pin = cpupin;
+	gic_intr_map[intr].polarity = GIC_POL_POS;
+	gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+	gic_intr_map[intr].ipiflag = 1;
+	ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
 static void __init fill_ipi_map(void)
 {
-	int i;
+	int cpu;
 
-	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
-			ipi_map[gic_intr_map[i].cpunum] |=
-				(1 << (gic_intr_map[i].pin + 2));
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
 }
 #endif
 
 void __init arch_init_irq(void)
 {
-	int gic_present, gcmp_present;
-
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
 		mips_cpu_irq_init();
 
-	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
 	if (gcmp_present)  {
 		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
 		gic_present = 1;
@@ -514,24 +530,10 @@
 	if (gic_present) {
 		/* FIXME */
 		int i;
-		struct {
-			unsigned int resched;
-			unsigned int call;
-		} ipiirq[] = {
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
-			}
-		};
+
+		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -553,12 +555,15 @@
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		for (i = 0; i < NR_CPUS; i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), &irq_call);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), handle_percpu_irq);
 		}
 	} else {
 		/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4d..f48d60e 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 	unsigned int __iomem *softres_reg =
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f5..63d8a29 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca..1c02f57 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 5911596..e08f49c 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733..8084b17 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
  *  fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
  *
  *  Copyright (C) 2003  Megasolution Inc. <matsu@megasolution.jp>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4..4196ccf 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3d..2fe29db 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
similarity index 87%
rename from arch/mips/cavium-octeon/msi.c
rename to arch/mips/pci/msi-octeon.c
index 964b03b..03742e6 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -16,8 +16,7 @@
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/cvmx-npei-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 /*
  * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@
  * programming the MSI control bits [6:4] before calling
  * pci_enable_msi().
  *
- * @param dev    Device requesting MSI interrupts
- * @param desc   MSI descriptor
+ * @dev:    Device requesting MSI interrupts
+ * @desc:   MSI descriptor
  *
  * Returns 0 on success.
  */
@@ -213,14 +212,9 @@
 }
 
 
-/**
+/*
  * Called by the interrupt handling code when an MSI interrupt
  * occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
  */
 static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
 {
@@ -256,31 +250,37 @@
 }
 
 
-/**
+/*
  * Initializes the MSI interrupt handling code
- *
- * @return
  */
 int octeon_msi_initialize(void)
 {
-	int r;
 	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:63]", octeon_msi_interrupt);
+				"MSI[0:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
 	} else if (octeon_is_pci_host()) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
 				IRQF_SHARED,
-				"MSI[0:15]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[16:31]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[32:47]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[48:63]", octeon_msi_interrupt);
+				"MSI[0:15]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[16:31]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[32:47]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[48:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
 	}
 	return 0;
 }
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b3..28962a7 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
  *  ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/pci.h>
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
similarity index 78%
rename from arch/mips/cavium-octeon/pci.c
rename to arch/mips/pci/pci-octeon.c
index 67c0ff5..9cb0c80 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -17,8 +17,7 @@
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 #define USE_OCTEON_INTERNAL_ARBITER
 
@@ -54,6 +53,126 @@
 	} s;
 };
 
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+					 u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (octeon_pcibios_map_irq)
+		return octeon_pcibios_map_irq(dev, slot, pin);
+	else
+		panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	uint16_t config;
+	uint32_t dconfig;
+	int pos;
+	/*
+	 * Force the Cache line setting to 64 bytes. The standard
+	 * Linux bus scan doesn't seem to set it. Octeon really has
+	 * 128 byte lines, but Intel bridges get really upset if you
+	 * try and set values above 64 bytes. Value is specified in
+	 * 32bit words.
+	 */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+	/* Set latency timers for all devices */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+	/* Enable reporting System errors and parity errors on all devices */
+	/* Enable parity checking and error reporting */
+	pci_read_config_word(dev, PCI_COMMAND, &config);
+	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	pci_write_config_word(dev, PCI_COMMAND, config);
+
+	if (dev->subordinate) {
+		/* Set latency timers on sub bridges */
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+		/* More bridge error detection */
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+	}
+
+	/* Enable the PCIe normal error reporting */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (pos) {
+		/* Update Device Control */
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+		/* Correctable Error Reporting */
+		config |= PCI_EXP_DEVCTL_CERE;
+		/* Non-Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_NFERE;
+		/* Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_FERE;
+		/* Unsupported Request */
+		config |= PCI_EXP_DEVCTL_URRE;
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+	}
+
+	/* Find the Advanced Error Reporting capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (pos) {
+		/* Clear Uncorrectable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				      &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				       dconfig);
+		/* Enable reporting of all uncorrectable errors */
+		/* Uncorrectable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+		/*
+		 * Leave severity at HW default. This only controls if
+		 * errors are reported as uncorrectable or
+		 * correctable, not if the error is reported.
+		 */
+		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+		/* Clear Correctable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+		/* Enable reporting of all correctable errors */
+		/* Correctable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+		/* Advanced Error Capabilities */
+		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+		/* ECRC Generation Enable */
+		if (config & PCI_ERR_CAP_ECRC_GENC)
+			config |= PCI_ERR_CAP_ECRC_GENE;
+		/* ECRC Check Enable */
+		if (config & PCI_ERR_CAP_ECRC_CHKC)
+			config |= PCI_ERR_CAP_ECRC_CHKE;
+		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+		/* Report all errors to the root complex */
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+				       PCI_ERR_ROOT_CMD_COR_EN |
+				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
+				       PCI_ERR_ROOT_CMD_FATAL_EN);
+		/* Clear the Root status register */
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+	}
+
+	return 0;
+}
+
 /**
  * Return the mapping of PCI device number to IRQ line. Each
  * character in the return string represents the interrupt
@@ -136,9 +255,8 @@
 }
 
 
-/**
+/*
  * Read a value from configuration space
- *
  */
 static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 			      int reg, int size, u32 *val)
@@ -174,15 +292,8 @@
 }
 
 
-/**
+/*
  * Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
  */
 static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
 			       int reg, int size, u32 val)
@@ -251,10 +362,8 @@
 };
 
 
-/**
+/*
  * Low level initialize the Octeon PCI controller
- *
- * Returns
  */
 static void octeon_pci_initialize(void)
 {
@@ -398,7 +507,7 @@
 		pci_int_arb_cfg.s.en = 1;	/* Internal arbiter enable */
 		cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
 	}
-#endif				/* USE_OCTEON_INTERNAL_ARBITER */
+#endif	/* USE_OCTEON_INTERNAL_ARBITER */
 
 	/*
 	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@
 }
 
 
-/**
+/*
  * Initialize the Octeon PCI controller
- *
- * Returns
  */
 static int __init octeon_pci_setup(void)
 {
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b..5652571 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
  *  pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32..6b1ae2e 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
  *  pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
similarity index 98%
rename from arch/mips/cavium-octeon/pcie.c
rename to arch/mips/pci/pcie-octeon.c
index 49d1408..7526224 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
 #include <asm/octeon/cvmx-pescx-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 
 union cvmx_pcie_address {
 	uint64_t u64;
@@ -976,13 +975,13 @@
 /**
  * Map a PCI device to the appropriate interrupt line
  *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
  *               enumerates through all the bridges and figures out the
  *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
  *               as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
  */
 int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
 				       u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@
 /**
  * Read a value from configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 					  unsigned int devfn, int reg, int size,
@@ -1156,12 +1155,12 @@
 /**
  * Write a value to PCI configuration space
  *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
  */
 static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
 					   unsigned int devfn, int reg,
@@ -1254,7 +1253,7 @@
 /**
  * Initialize the Octeon PCIe controllers
  *
- * @return
+ * Returns
  */
 static int __init octeon_pcie_setup(void)
 {
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab8..719f4a5 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330..6346c59 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
  *  bcu.c, Bus Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3..8ba7d04 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
  *  cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copuright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copuright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1..22cc6f2 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series GIU platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9f..6d39e22 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
  *  icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Coped with INTASSIGN of NEC VR4133.
  */
 #include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c649953..1386e6f 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc3891..bef0687 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
 /*
  *  Interrupt handing routines for NEC VR4100 series.
  *
- *  Copyright (C) 2005-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf7..692b4e8 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14..ebc5dcf 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6..54eae56 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series SIU platform device.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5..ff84142 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
 /*
  *  type.c, System type for NEC VR4100 series.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297..3982f37 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the IBM WorkPad z50.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a4..35d2ed6 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -70,10 +70,6 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask)	(0)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c..0dfdc50 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -136,8 +136,7 @@
 	unsigned long *stack, addr, module_start, module_end;
 	int i;
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Call Trace:");
+	printk(KERN_EMERG "\nCall Trace:");
 
 	stack = sp;
 	i = 0;
@@ -153,7 +152,7 @@
 			printk("\n");
 #else
 			if ((i % 6) == 0)
-				printk("\n" KERN_EMERG "  ");
+				printk(KERN_EMERG "  ");
 			printk("[<%08lx>] ", addr);
 			i++;
 #endif
@@ -180,7 +179,7 @@
 		if (((long) stack & (THREAD_SIZE - 1)) == 0)
 			break;
 		if ((i % 8) == 0)
-			printk("\n" KERN_EMERG "  ");
+			printk(KERN_EMERG "  ");
 		printk("%08lx ", *stack++);
 	}
 
@@ -264,8 +263,7 @@
 		show_stack(current, (unsigned long *) sp);
 
 #if 0
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "Code: ");
+		printk(KERN_EMERG "\nCode: ");
 		if (regs->pc < PAGE_OFFSET)
 			goto bad;
 
@@ -311,16 +309,14 @@
 {
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "%s: %04x\n",
+	printk(KERN_EMERG "\n%s: %04x\n",
 	       str, code & 0xffff);
 	show_registers(regs);
 
 	if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
 	    (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
 		printk(KERN_EMERG "Exception in usermode interrupt handler\n");
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "  Please connect to kernel debugger !!\n");
+		printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
 		asm volatile ("0: bra 0b");
 	}
 
@@ -429,9 +425,8 @@
 {
 	console_verbose();
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Asynchronous I/O Bus Error\n"
-	       KERN_EMERG "==========================\n");
+	printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+	printk(KERN_EMERG "==========================\n");
 
 	if (bcberr & BCBERR_BEME)
 		printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcef..c96ba3d 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@
 	_edata = .;		/* End of data section */
   }
 
-  .data.init_task : { INIT_TASK(THREAD_SIZE); }
+  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39..06f8d5b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
+	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff9..8bc9e96 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v)	((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-(i),(v))))
 #define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
 #define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
 
-#define atomic_add_return(i,v)	(__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v)	(__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-(i),(v)))
 #define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
 #define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
 
@@ -336,7 +336,11 @@
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
 
 #include <asm-generic/atomic-long.h>
 
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f0..f7a18f9 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
  * Written by Hennus Bergman, 1992.
  * High DMA channel support & info by Hannu Savolainen
  * and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 0000000..dc9e829
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8..9ce66e9 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
 #include <asm/types.h>
 #include <asm/system.h>
 #include <asm/percpu.h>
+
 #endif /* __ASSEMBLY__ */
 
 #define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
@@ -127,6 +128,8 @@
 	unsigned long  flags;
 }; 
 
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
 /* Thread struct flags. */
 #define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
 #define PARISC_UAC_SIGBUS	(1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c92..d91357b 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@
 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
 #define __ldcw(a) ({						\
 	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
-		: "=r" (__ret) : "r" (a));			\
+	__asm__ __volatile__(__LDCW " 0(%2),%0"			\
+		: "=r" (__ret), "+m" (*(a)) : "r" (a));		\
 	__ret;							\
 })
 
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4f..8f1a810 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
  * N class systems, only one PxTLB inter processor broadcast can be
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class.  We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
  */
 extern spinlock_t pa_tlb_lock;
 
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags)	spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags)	spin_unlock_irqrestore(&pa_tlb_lock, flags)
 
 extern void flush_tlb_all(void);
 extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr)
 {
+	unsigned long flags;
+
 	/* For one page, it's not worth testing the split_tlb variable */
 
 	mb();
 	mtsp(vma->vm_mm->context,1);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb(addr);
 	pitlb(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b00..f3d3b8b 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
 #define __NR_dup3		(__NR_Linux + 312)
 #define __NR_pipe2		(__NR_Linux + 313)
 #define __NR_inotify_init1	(__NR_Linux + 314)
+#define __NR_preadv		(__NR_Linux + 315)
+#define __NR_pwritev		(__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
+#define __NR_perf_counter_open	(__NR_Linux + 318)
 
-#define __NR_Linux_syscalls	(__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls	(__NR_perf_counter_open + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530e..b6ed34d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -398,12 +397,13 @@
 
 void clear_user_page_asm(void *page, unsigned long vaddr)
 {
+	unsigned long flags;
 	/* This function is implemented in assembly in pacache.S */
 	extern void __clear_user_page_asm(void *page, unsigned long vaddr);
 
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	__clear_user_page_asm(page, vaddr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
+	unsigned long flags;
+
 	purge_kernel_dcache_page((unsigned long)page);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(page);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 	clear_user_page_asm(page, vaddr);
 }
 EXPORT_SYMBOL(clear_user_page);
 
 void flush_kernel_dcache_page_addr(void *addr)
 {
+	unsigned long flags;
+
 	flush_kernel_dcache_page_asm(addr);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
 
@@ -490,8 +494,10 @@
 	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
+		unsigned long flags;
+
 		mtsp(sid, 1);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		if (split_tlb) {
 			while (npages--) {
 				pdtlb(start);
@@ -504,7 +510,7 @@
 				start += PAGE_SIZE;
 			}
 		}
-		purge_tlb_end();
+		purge_tlb_end(flags);
 	}
 }
 
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1..d228d82 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@
 static int __init 
 pat_query_module(ulong pcell_loc, ulong mod_index)
 {
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 	unsigned long bytecnt;
 	unsigned long temp;	/* 64-bit scratch value */
 	long status;		/* PDC return value status */
 	struct parisc_device *dev;
 
+	pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 	/* return cell module (PA or Processor view) */
 	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
-				     PA_VIEW, &pa_pdc_cell);
+				     PA_VIEW, pa_pdc_cell);
 
 	if (status != PDC_OK) {
 		/* no more cell modules or error */
 		return status;
 	}
 
-	temp = pa_pdc_cell.cba;
-	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+	temp = pa_pdc_cell->cba;
+	dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
 	if (!dev) {
 		return PDC_OK;
 	}
@@ -203,8 +207,8 @@
 
 	/* save generic info returned from the call */
 	/* REVISIT: who is the consumer of this? not sure yet... */
-	dev->mod_info = pa_pdc_cell.mod_info;	/* pass to PAT_GET_ENTITY() */
-	dev->pmod_loc = pa_pdc_cell.mod_location;
+	dev->mod_info = pa_pdc_cell->mod_info;	/* pass to PAT_GET_ENTITY() */
+	dev->pmod_loc = pa_pdc_cell->mod_location;
 
 	register_parisc_device(dev);	/* advertise device */
 
@@ -216,14 +220,14 @@
 
 	case PAT_ENTITY_PROC:
 		printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
-			pa_pdc_cell.mod[0]);
+			pa_pdc_cell->mod[0]);
 		break;
 
 	case PAT_ENTITY_MEM:
 		printk(KERN_DEBUG 
 			"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
-			pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], 
-			pa_pdc_cell.mod[2]);
+			pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+			pa_pdc_cell->mod[2]);
 		break;
 	case PAT_ENTITY_CA:
 		printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@
  print_ranges:
 		pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				    IO_VIEW, &io_pdc_cell);
-		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
-		for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+		for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
 			printk(KERN_DEBUG 
 				"  PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, pa_pdc_cell.mod[2 + i * 3],	/* type */
-				pa_pdc_cell.mod[3 + i * 3],	/* start */
-				pa_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, pa_pdc_cell->mod[2 + i * 3],	/* type */
+				pa_pdc_cell->mod[3 + i * 3],	/* start */
+				pa_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 			printk(KERN_DEBUG 
 				"  IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, io_pdc_cell.mod[2 + i * 3],	/* type */
-				io_pdc_cell.mod[3 + i * 3],	/* start */
-				io_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, io_pdc_cell->mod[2 + i * 3],	/* type */
+				io_pdc_cell->mod[3 + i * 3],	/* start */
+				io_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 		}
 		printk(KERN_DEBUG "\n");
 		break;
 	}
 #endif /* DEBUG_PAT */
+
+	kfree(pa_pdc_cell);
+
 	return PDC_OK;
 }
 
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e..330f536 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		cpumask_setall(&irq_desc[irq].affinity);
+		cpumask_setall(irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
@@ -138,13 +138,13 @@
 	if (cpu_dest < 0)
 		return -1;
 
-	cpumask_copy(&irq_desc[irq].affinity, dest);
+	cpumask_copy(irq_desc[irq].affinity, dest);
 
 	return 0;
 }
 #endif
 
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
 	.shutdown	= cpu_disable_irq,
@@ -299,7 +299,7 @@
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	cpumask_copy(&dest, &irq_desc[irq].affinity);
+	cpumask_copy(&dest, irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927ea..c07f618 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
+
 		if (!pte_none(*pte))
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
 		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
 		pte_t page = *pte;
+
 		pte_clear(&init_mm, vaddr, pte);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386..f7064ab 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c0707..1f3aa8d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@
 	 * software. The user has to press the button himself. */
 
 	printk(KERN_EMERG "System shut down completed.\n"
-	       KERN_EMERG "Please power this system off now.");
+	       "Please power this system off now.");
 }
 
 void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7..c8fb61e 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/*    $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
@@ -121,22 +120,28 @@
 	if (is_pdc_pat()) {
 		ulong status;
 		unsigned long bytecnt;
-	        pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	        pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 #undef USE_PAT_CPUID
 #ifdef USE_PAT_CPUID
 		struct pdc_pat_cpu_num cpu_info;
 #endif
 
+		pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+		if (!pa_pdc_cell)
+			panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 		status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
-			dev->mod_index, PA_VIEW, &pa_pdc_cell);
+			dev->mod_index, PA_VIEW, pa_pdc_cell);
 
 		BUG_ON(PDC_OK != status);
 
 		/* verify it's the same as what do_pat_inventory() found */
-		BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
-		BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+		BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+		BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
 
-		txn_addr = pa_pdc_cell.mod[0];   /* id_eid for IO sapic */
+		txn_addr = pa_pdc_cell->mod[0];   /* id_eid for IO sapic */
+
+		kfree(pa_pdc_cell);
 
 #ifdef USE_PAT_CPUID
 /* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca..cb71f3d 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/*    $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c..92a0aca 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@
 	return ret;
 }
 
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-	if (ufdset) {
-		unsigned long odd;
-
-		if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
-			return -EFAULT;
-
-		odd = n & 1UL;
-		n &= ~1UL;
-		while (n) {
-			unsigned long h, l;
-			__get_user(l, ufdset);
-			__get_user(h, ufdset+1);
-			ufdset += 2;
-			*fdset++ = h << 32 | l;
-			n -= 2;
-		}
-		if (odd)
-			__get_user(*fdset, ufdset);
-	} else {
-		/* Tricky, must clear full unsigned long in the
-		 * kernel fdset at the end, this makes sure that
-		 * actually happens.
-		 */
-		memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
-	}
-	return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	unsigned long odd;
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
-	if (!ufdset)
-		return;
-
-	odd = n & 1UL;
-	n &= ~1UL;
-	while (n) {
-		unsigned long h, l;
-		l = *fdset++;
-		h = l >> 32;
-		__put_user(l, ufdset);
-		__put_user(h, ufdset+1);
-		ufdset += 2;
-		n -= 2;
-	}
-	if (odd)
-		__put_user(*fdset, ufdset);
-}
-
 struct msgbuf32 {
     int mtype;
     char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01..cf145eb 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
 	ENTRY_SAME(dup3)
 	ENTRY_SAME(pipe2)
 	ENTRY_SAME(inotify_init1)
+	ENTRY_COMP(preadv)		/* 315 */
+	ENTRY_COMP(pwritev)
+	ENTRY_COMP(rt_tgsigqueueinfo)
+	ENTRY_SAME(perf_counter_open)
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd056..a79c6f9 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@
  */
 irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
+	unsigned long now, now2;
 	unsigned long next_tick;
-	unsigned long cycles_elapsed, ticks_elapsed;
+	unsigned long cycles_elapsed, ticks_elapsed = 1;
 	unsigned long cycles_remainder;
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@
 	/* Initialize next_tick to the expected tick time. */
 	next_tick = cpuinfo->it_value;
 
-	/* Get current interval timer.
-	 * CR16 reads as 64 bits in CPU wide mode.
-	 * CR16 reads as 32 bits in CPU narrow mode.
-	 */
+	/* Get current cycle counter (Control Register 16). */
 	now = mfctl(16);
 
 	cycles_elapsed = now - next_tick;
 
-	if ((cycles_elapsed >> 5) < cpt) {
+	if ((cycles_elapsed >> 6) < cpt) {
 		/* use "cheap" math (add/subtract) instead
 		 * of the more expensive div/mul method
 		 */
 		cycles_remainder = cycles_elapsed;
-		ticks_elapsed = 1;
 		while (cycles_remainder > cpt) {
 			cycles_remainder -= cpt;
 			ticks_elapsed++;
 		}
 	} else {
+		/* TODO: Reduce this to one fdiv op */
 		cycles_remainder = cycles_elapsed % cpt;
-		ticks_elapsed = 1 + cycles_elapsed / cpt;
-	}
-
-	/* Can we differentiate between "early CR16" (aka Scenario 1) and
-	 * "long delay" (aka Scenario 3)? I don't think so.
-	 *
-	 * We expected timer_interrupt to be delivered at least a few hundred
-	 * cycles after the IT fires. But it's arbitrary how much time passes
-	 * before we call it "late". I've picked one second.
-	 */
-	if (unlikely(ticks_elapsed > HZ)) {
-		/* Scenario 3: very long delay?  bad in any case */
-		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
-			" cycles %lX rem %lX "
-			" next/now %lX/%lX\n",
-			cpu,
-			cycles_elapsed, cycles_remainder,
-			next_tick, now );
+		ticks_elapsed += cycles_elapsed / cpt;
 	}
 
 	/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@
 
 	cpuinfo->it_value = next_tick;
 
-	/* Skip one clocktick on purpose if we are likely to miss next_tick.
-	 * We want to avoid the new next_tick being less than CR16.
-	 * If that happened, itimer wouldn't fire until CR16 wrapped.
-	 * We'll catch the tick we missed on the tick after that.
+	/* Program the IT when to deliver the next interrupt.
+	 * Only bottom 32-bits of next_tick are writable in CR16!
 	 */
-	if (!(cycles_remainder >> 13))
-		next_tick += cpt;
-
-	/* Program the IT when to deliver the next interrupt. */
-	/* Only bottom 32-bits of next_tick are written to cr16.  */
 	mtctl(next_tick, 16);
 
+	/* Skip one clocktick on purpose if we missed next_tick.
+	 * The new CR16 must be "later" than current CR16 otherwise
+	 * itimer would not fire until CR16 wrapped - e.g 4 seconds
+	 * later on a 1Ghz processor. We'll account for the missed
+	 * tick on the next timer interrupt.
+	 *
+	 * "next_tick - now" will always give the difference regardless
+	 * if one or the other wrapped. If "now" is "bigger" we'll end up
+	 * with a very large unsigned number.
+	 */
+	now2 = mfctl(16);
+	if (next_tick - now2 > cpt)
+		mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+	if (unlikely(now2 - now > 0x3000)) 	/* 12K cycles */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+			" cyc %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu, now2 - now, cycles_elapsed, cycles_remainder,
+			next_tick, now );
+#endif
+
+	/* Can we differentiate between "early CR16" (aka Scenario 1) and
+	 * "long delay" (aka Scenario 3)? I don't think so.
+	 *
+	 * Timer_interrupt will be delivered at least a few hundred cycles
+	 * after the IT fires. But it's arbitrary how much time passes
+	 * before we call it "late". I've picked one second.
+	 *
+	 * It's important NO printk's are between reading CR16 and
+	 * setting up the next value. May introduce huge variance.
+	 */
+	if (unlikely(ticks_elapsed > HZ)) {
+		/* Scenario 3: very long delay?  bad in any case */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+			" cycles %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu,
+			cycles_elapsed, cycles_remainder,
+			next_tick, now );
+	}
 
 	/* Done mucking with unreliable delivery of interrupts.
 	 * Go do system house keeping.
@@ -173,7 +191,7 @@
 
 /* clock source code */
 
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
 {
 	return get_cycles();
 }
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6..528f0ff 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@
 	oops_enter();
 
 	/* Amuse the user in a SPARC fashion */
-	if (err) printk(
-KERN_CRIT "      _______________________________ \n"
-KERN_CRIT "     < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT "      ------------------------------- \n"
-KERN_CRIT "             \\   ^__^\n"
-KERN_CRIT "              \\  (xx)\\_______\n"
-KERN_CRIT "                 (__)\\       )\\/\\\n"
-KERN_CRIT "                  U  ||----w |\n"
-KERN_CRIT "                     ||     ||\n");
+	if (err) printk(KERN_CRIT
+			"      _______________________________ \n"
+			"     < Your System ate a SPARC! Gah! >\n"
+			"      ------------------------------- \n"
+			"             \\   ^__^\n"
+			"                 (__)\\       )\\/\\\n"
+			"                  U  ||----w |\n"
+			"                     ||     ||\n");
 	
 	/* unlock the pdc lock if necessary */
 	pdc_emergency_unlock();
@@ -797,7 +796,8 @@
 		else
 			printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
 			       code);
-		printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+		printk(KERN_CONT "pid=%d command='%s'\n",
+		       task_pid_nr(current), current->comm);
 		show_regs(regs);
 #endif
 		si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d..ae66d31 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909..abf41f4 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@
 
 unaligned_copy:
 	/* possibly we are aligned on a word, but not on a double... */
-	if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
 		t2 = src & (sizeof(unsigned int) - 1);
 
 		if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f..3ca1c61 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
  * END_DESC
 */
 
-
+#include <linux/kernel.h>
 #include "float.h"
 #include "sgl_float.h"
 #include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6..c6afbfc 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb..b0831d9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@
 
 void free_initmem(void)
 {
-	unsigned long addr, init_begin, init_end;
-
-	printk(KERN_INFO "Freeing unused kernel memory: ");
+	unsigned long addr;
+	unsigned long init_begin = (unsigned long)__init_begin;
+	unsigned long init_end = (unsigned long)__init_end;
 
 #ifdef CONFIG_DEBUG_KERNEL
 	/* Attempt to catch anyone trying to execute code here
 	 * by filling the page with BRK insns.
-	 * 
-	 * If we disable interrupts for all CPUs, then IPI stops working.
-	 * Kinda breaks the global cache flushing.
 	 */
-	local_irq_disable();
-
-	memset(__init_begin, 0x00,
-		(unsigned long)__init_end - (unsigned long)__init_begin);
-
-	flush_data_cache();
-	asm volatile("sync" : : );
-	flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
-	asm volatile("sync" : : );
-
-	local_irq_enable();
+	memset((void *)init_begin, 0x00, init_end - init_begin);
+	flush_icache_range(init_begin, init_end);
 #endif
 	
 	/* align __init_begin and __init_end to page size,
 	   ignoring linker script where we might have tried to save RAM */
-	init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
-	init_end   = PAGE_ALIGN((unsigned long)(__init_end));
+	init_begin = PAGE_ALIGN(init_begin);
+	init_end = PAGE_ALIGN(init_end);
 	for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
 	
-	printk("%luk freed\n", (init_end - init_begin) >> 10);
+	printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+		(init_end - init_begin) >> 10);
 }
 
 
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56..31605ee 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
 				compatible = "gpio-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "on";
+					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
 				};
 			};
 
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f09..787635f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun  9 23:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,6 +41,7 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,7 +77,17 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,11 +167,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,10 +186,11 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -235,9 +249,13 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -271,14 +290,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +370,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +383,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,7 +565,7 @@
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
 
 #
 # SCSI Transports
@@ -541,10 +577,12 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=128
 CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -663,6 +703,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -721,6 +782,7 @@
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@
 #
 # LED drivers
 #
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -973,6 +1057,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -993,6 +1078,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,7 +1219,7 @@
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1190,24 +1297,27 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1223,6 +1333,8 @@
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41..52e4d54 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@
 			udelay(delay);                                         \
 		else                                                           \
 			cpu_relax();                                           \
+	if (!__ret)                                                            \
+		__ret = (condition);                                           \
 	__ret;		                                                       \
 })
 
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47f..c244133 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87..833097a 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c7..bc122a1 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@
 	int psize;
 #endif
 
-	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+	pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
 
 	start &= PAGE_MASK;
 	addr = start;
@@ -170,7 +170,7 @@
 					start, len)))
 		goto slow_irqon;
 
-	pr_debug("  aligned: %lx .. %lx\n", start, end);
+	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@
 		do {
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
 			ptep = huge_pte_offset(mm, a);
-			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			pr_devel(" %016lx: huge ptep %p\n", a, ptep);
 			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
 						   &nr))
 				goto slow;
@@ -249,7 +249,7 @@
 #ifdef CONFIG_PPC64
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
 #endif
-			pr_debug("  %016lx: normal pgd %p\n", addr,
+			pr_devel("  %016lx: normal pgd %p\n", addr,
 				 (void *)pgd_val(pgd));
 			next = pgd_addr_end(addr, end);
 			if (pgd_none(pgd))
@@ -269,7 +269,7 @@
 slow:
 		local_irq_enable();
 slow_irqon:
-		pr_debug("  slow path ! nr = %d\n", nr);
+		pr_devel("  slow path ! nr = %d\n", nr);
 
 		/* Try to get the remaining pages with get_user_pages */
 		start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986..92a1971 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@
 				id = first_context;
 			continue;
 		}
-		pr_debug("[%d] steal context %d from mm @%p\n",
+		pr_devel("[%d] steal context %d from mm @%p\n",
 			 smp_processor_id(), id, mm);
 
 		/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@
 	spin_lock(&context_lock);
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
 		 cpu, next, next->context.active, next->context.id);
 #endif
 
@@ -189,7 +189,7 @@
 	next->context.active++;
 	if (prev) {
 #ifndef DEBUG_STEAL_ONLY
-		pr_debug(" old context %p active was: %d\n",
+		pr_devel(" old context %p active was: %d\n",
 			 prev, prev->context.active);
 #endif
 		WARN_ON(prev->context.active < 1);
@@ -236,7 +236,7 @@
 	next->context.id = id;
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
 		 cpu, id, nr_free_contexts);
 #endif
 
@@ -247,7 +247,7 @@
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
 			 cpu, id, next);
 		local_flush_tlb_mm(next);
 
@@ -314,13 +314,13 @@
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
 		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
 		break;
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
 		break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67c..627767d 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@
 	page = pfn_to_page(pfn);
 
 	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_debug("do_dcache_icache_coherency... flushing\n");
+		pr_devel("do_dcache_icache_coherency... flushing\n");
 		flush_dcache_icache_page(page);
 		set_bit(PG_arch_1, &page->flags);
 	}
 	else
-		pr_debug("do_dcache_icache_coherency... already clean\n");
+		pr_devel("do_dcache_icache_coherency... already clean\n");
 	return __pte(pte_val(pte) | _PAGE_HWEXEC);
 }
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80..5b7038f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
-
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
 #include <linux/compiler.h>
 #include <asm/udbg.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
 
 extern void slb_allocate_realmode(unsigned long ea);
 extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@
 		patch_slb_encoding(slb_compare_rr_to_size,
 				   mmu_slb_size);
 
-		DBG("SLB: linear  LLP = %04lx\n", linear_llp);
-		DBG("SLB: io      LLP = %04lx\n", io_llp);
+		pr_devel("SLB: linear  LLP = %04lx\n", linear_llp);
+		pr_devel("SLB: io      LLP = %04lx\n", io_llp);
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 		patch_slb_encoding(slb_miss_kernel_load_vmemmap,
 				   SLB_VSID_KERNEL | vmemmap_llp);
-		DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+		pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
 #endif
 	}
 
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e..937eb90 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = get_slice_psize(mm, addr);;
+		psize = get_slice_psize(mm, addr);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa44..c591339 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@
 			goto fail;
 
 		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;;
+			goto fail;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
 			if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 0362c88..e5c1b09 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -64,8 +64,6 @@
 };
 
 
-static u32 post_info;
-
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -87,10 +85,9 @@
 
 	iounmap(fpga);
 
-	if (post1 || post2) {
+	if (post1 || post2)
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-		post_info = 1;
-	} else
+	else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
@@ -166,6 +163,9 @@
 		value ^= 1;
 		mdelay(500);
 	}
+
+	/* Not reached */
+	return IRQ_HANDLED;
 }
 
 static int pika_setup_leds(void)
@@ -179,15 +179,10 @@
 	}
 
 	for_each_child_of_node(np, child)
-		if (strcmp(child->name, "green") == 0) {
+		if (strcmp(child->name, "green") == 0)
 			green_led = of_get_gpio(child, 0);
-			/* Turn back on the green LED */
-			gpio_set_value(green_led, 1);
-		} else if (strcmp(child->name, "red") == 0) {
+		else if (strcmp(child->name, "red") == 0)
 			red_led = of_get_gpio(child, 0);
-			/* Set based on post */
-			gpio_set_value(red_led, post_info);
-		}
 
 	of_node_put(np);
 
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc..7ee979f 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@
 		goto out;
 	}
 
-	priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		of_node_put(np);
 		ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498d..aca5741 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@
 
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
-	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+	pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
 
 	dcr_write(msic->dcr_host, dcr_n, val);
 }
@@ -98,7 +98,7 @@
 	int retry = 0;
 
 	write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
-	pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+	pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
 
 	/* write_offset doesn't wrap properly, so we have to mask it */
 	write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@
 		msi  = le32_to_cpu(msic->fifo_virt[idx]);
 		msi &= 0xFFFF;
 
-		pr_debug("axon_msi: woff %x roff %x msi %x\n",
+		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
 		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@
 			 */
 			udelay(1);
 			retry++;
-			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+			pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
 			continue;
 		}
 
 		if (retry) {
-			pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+			pr_devel("axon_msi: late irq 0x%x, retry %d\n",
 				 msi, retry);
 			retry = 0;
 		}
@@ -332,7 +332,7 @@
 	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
-	pr_debug("axon_msi: disabling %s\n",
+	pr_devel("axon_msi: disabling %s\n",
 		  msic->irq_host->of_node->full_name);
 	tmp  = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
 	tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@
 	unsigned int virq;
 	int dcr_base, dcr_len;
 
-	pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+	pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
 
 	msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
 	if (!msic) {
@@ -403,7 +403,7 @@
 
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
-	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+	pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
 
 	/* Enable the MSIC hardware */
 	msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@
 
 	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
 	if (addr == OF_BAD_ADDR) {
-		pr_debug("axon_msi: couldn't translate reg property\n");
+		pr_devel("axon_msi: couldn't translate reg property\n");
 		return;
 	}
 
 	msic->trigger = ioremap(addr, 0x4);
 	if (!msic->trigger) {
-		pr_debug("axon_msi: ioremap failed\n");
+		pr_devel("axon_msi: ioremap failed\n");
 		return;
 	}
 
@@ -498,7 +498,7 @@
 
 	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
 				 msic, &fops_msic)) {
-		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		pr_devel("axon_msi: debugfs_create_file failed!\n");
 		return;
 	}
 }
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe..708c751 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@
 static struct pmf_function *pfunc_cpu_setfreq_high;
 static struct pmf_function *pfunc_cpu_setfreq_low;
 static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
 
 static int g5_pfunc_switch_freq(int speed_mode)
 {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce7363..d212006 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@
 	np = of_find_node_by_name(NULL, "via-pmu");
 	if (np == NULL)
 		goto not_found;
-	viaint = irq_of_parse_and_map(np, 0);;
+	viaint = irq_of_parse_and_map(np, 0);
 
 not_found:
 #endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0f..3f763c5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@
 	int result;
 
 	dump_mmio_region(r);
-;
 	result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
 		r->lpar_addr);
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa..903eb9e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@
 	unsigned long hpte_v, hpte_r;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+		pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
 			 "rflags=%lx, vflags=%lx, psize=%d)\n",
 			 hpte_group, va, pa, rflags, vflags, psize);
 
@@ -294,7 +294,7 @@
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+		pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
 	/* Now fill in the actual HPTE */
 	/* Set CEC cookie to 0         */
@@ -311,7 +311,7 @@
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
 	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" full\n");
+			pr_devel(" full\n");
 		return -1;
 	}
 
@@ -322,11 +322,11 @@
 	 */
 	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" lpar err %lu\n", lpar_rc);
+			pr_devel(" lpar err %lu\n", lpar_rc);
 		return -2;
 	}
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" -> slot: %lu\n", slot & 7);
+		pr_devel(" -> slot: %lu\n", slot & 7);
 
 	/* Because of iSeries, we have to pass down the secondary
 	 * bucket bit here as well
@@ -418,17 +418,17 @@
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
 
-	pr_debug("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+	pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
 		 want_v, slot, flags, psize);
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v);
 
 	if (lpar_rc == H_NOT_FOUND) {
-		pr_debug("not found !\n");
+		pr_devel("not found !\n");
 		return -1;
 	}
 
-	pr_debug("ok\n");
+	pr_devel("ok\n");
 
 	BUG_ON(lpar_rc != H_SUCCESS);
 
@@ -503,7 +503,7 @@
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	pr_debug("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+	pr_devel("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
 		 slot, va, psize, local);
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a..419f8a6 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@
 	int call_status;
 	int server;
 
-	pr_debug("xics: unmask virq %d\n", virq);
+	pr_devel("xics: unmask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
-	pr_debug(" -> map to hwirq 0x%x\n", irq);
+	pr_devel(" -> map to hwirq 0x%x\n", irq);
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
@@ -252,7 +252,7 @@
 {
 	unsigned int irq;
 
-	pr_debug("xics: mask virq %d\n", virq);
+	pr_devel("xics: mask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@
 static int xics_host_map(struct irq_host *h, unsigned int virq,
 			 irq_hw_number_t hw)
 {
-	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	/* Insert the interrupt mapping into the radix tree for fast lookup */
 	irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1..cbb3bed 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@
 			break;
 		default:
 			str = "Unknown";
-			break;;
+			break;
 		}
 		dev_info(dev, "Hardware port width: %s\n", str);
 
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce..69e2630 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@
 	if (ret)
 		return NULL;
 
-	ipic = alloc_bootmem(sizeof(struct ipic));
+	ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
 	if (ipic == NULL)
 		return NULL;
 
-	memset(ipic, 0, sizeof(struct ipic));
-
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index d46de1f..3981ae4 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -508,9 +508,8 @@
 	printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
 
 	/* Allocate fixups array */
-	mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+	mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
 	BUG_ON(mpic->fixups == NULL);
-	memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
 
 	/* Init spinlock */
 	spin_lock_init(&mpic->fixup_lock);
@@ -1109,9 +1108,8 @@
 			psize /= 4;
 			bits = intvec_top + 1;
 			mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
-			mpic->protected = alloc_bootmem(mapsize);
+			mpic->protected = kzalloc(mapsize, GFP_KERNEL);
 			BUG_ON(mpic->protected == NULL);
-			memset(mpic->protected, 0, mapsize);
 			for (i = 0; i < psize; i++) {
 				if (psrc[i] > intvec_top)
 					continue;
@@ -1353,7 +1351,8 @@
 
 #ifdef CONFIG_PM
 	/* allocate memory to save mpic state */
-	mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+	mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+				  GFP_KERNEL);
 	BUG_ON(mpic->save_data == NULL);
 #endif
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93..6ff9d71 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@
 		 */
 
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(ep_size));;
+		sa = (0xffffffffffffffffull << ilog2(ep_size));
 
 		/* Setup BAR0 */
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@
 		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
 	} else {
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(size));;
+		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf98..074905c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@
 	if (ret)
 		return;
 
-	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
 	if (qe_ic == NULL)
 		return;
 
-	memset(qe_ic, 0, sizeof(struct qe_ic));
-
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
 	if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c..466ce9a 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@
 
 	BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
 
-	uic = alloc_bootmem(sizeof(*uic));
+	uic = kzalloc(sizeof(*uic), GFP_KERNEL);
 	if (! uic)
 		return NULL; /* FIXME: panic? */
 
-	memset(uic, 0, sizeof(*uic));
 	spin_lock_init(&uic->lock);
 	indexp = of_get_property(node, "cell-index", &len);
 	if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5..39224b5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a332..1804556 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd..8fed45a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -272,6 +275,62 @@
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,11 +339,62 @@
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
 
 #define SW41_A    0x0100
 #define SW41_B    0x0200
@@ -294,6 +404,7 @@
 #define SW41_F    0x2000
 #define SW41_G    0x4000
 #define SW41_H    0x8000
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +413,16 @@
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
+	/* turn on USB clocks, use external clock */
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* enable USB0 port */
+	ctrl_outw(0x0600, 0xa40501d4);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +492,7 @@
 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
-	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
 
 	/* enable CEU1 */
 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
@@ -389,7 +507,7 @@
 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
-	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +522,28 @@
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +577,7 @@
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d2..b18cfd3 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -858,7 +858,35 @@
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +898,27 @@
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270..3ee783a0 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2..d8e6bb9 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET	0
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc3468..6f83f2c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/err.h>
 #include <asm/ptrace.h>
 
 /* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b6..29514a3 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbd..7192594 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,14 +103,17 @@
 		return;
 	}
 
-	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
-		local_irq_enable();
-	}
-
 	mm = tsk->mm;
 
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
+		local_irq_enable();
+
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -141,10 +160,15 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e1..3ce40ea 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0..0960de5 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % 8) == 0))
-			printk("\n" KERN_INFO "       ");
-		printk("%08lx ", *stack++);
+			printk(KERN_INFO "       ");
+		printk(KERN_CONT "%08lx ", *stack++);
 	}
 
 	show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef..738bdc6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,26 @@
 	  recommended you say N here while the DMAR code remains
 	  experimental.
 
-config DMAR_GFX_WA
-	def_bool y
-	prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+	def_bool n
+	prompt "Workaround broken graphics drivers (going away soon)"
 	depends on DMAR
 	---help---
 	  Current Graphics drivers tend to use physical address
 	  for DMA and avoid using DMA APIs. Setting this config
 	  option permits the IOMMU driver to set a unity map for
 	  all the OS-visible memory. Hence the driver can continue
-	  to use physical addresses for DMA.
+	  to use physical addresses for DMA, at least until this
+	  option is removed in the 2.6.32 kernel.
 
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
 	---help---
-	  Floppy disk drivers are know to bypass DMA API calls
+	  Floppy disk drivers are known to bypass DMA API calls
 	  thereby failing to work when IOMMU is enabled. This
 	  workaround will setup a 1:1 mapping for the first
-	  16M to make floppy (an ISA device) work.
+	  16MiB to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be4..49e0c18 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@
 	ireg.al = mode;		/* AH=0x00 Set Video Mode */
 	intcall(0x10, &ireg, NULL);
 
-
 	ireg.ah = 0x0f;		/* Get Current Video Mode */
 	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
 
 	/* Not all BIOSes are clean with the top bit */
-	new_mode = ireg.al & 0x7f;
+	new_mode = oreg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147..275dd17 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@
 	ireg.di = (size_t)&vginfo;
 	intcall(0x10, &ireg, &oreg);
 
-	if (ireg.ax != 0x004f ||
+	if (oreg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -70,7 +70,7 @@
 		ireg.di = (size_t)&vminfo;
 		intcall(0x10, &ireg, &oreg);
 
-		if (ireg.ax != 0x004f)
+		if (oreg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3..7b2d71d 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-	FIX_TEXT_POKE0,	/* reserve 2 pages for text_poke() */
-	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
+	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -129,6 +126,9 @@
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5..6be7fc2 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
 #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
 #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
 
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c972644..c86e5ed4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@
 int lapic_watchdog_init(unsigned nmi_hz);
 int lapic_wd_event(unsigned nmi_hz);
 unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
 void disable_lapic_nmi_watchdog(void);
 void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ec..621f56d 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
 
 #endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db8..4e77853 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
 #endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b8..430d5b2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@
 CFLAGS_paravirt.o	:= $(nostackp)
 GCOV_PROFILE_vsyscall_64.o	:= n
 GCOV_PROFILE_hpet.o		:= n
+GCOV_PROFILE_tsc.o		:= n
+GCOV_PROFILE_paravirt.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f04..6c99f50 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@
 	return 0;
 }
 
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
 	.notifier_call = device_change_notifier,
 };
 
@@ -1763,7 +1763,7 @@
 	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
-		return 0;
+		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2acc..c1b17e9 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@
 	if (iommu->evt_buf == NULL)
 		return NULL;
 
+	iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
 	return iommu->evt_buf;
 }
 
@@ -691,6 +693,7 @@
 
 			devid = e->devid;
 			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(iommu, devid   , e->flags, 0);
 			set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
@@ -749,11 +752,13 @@
 
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
-				if (alias)
+				if (alias) {
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(iommu,
-						amd_iommu_alias_table[dev_i],
-						flags, ext_flags);
+					set_dev_entry_from_acpi(iommu,
+						devid_to, flags, ext_flags);
+				}
+				set_dev_entry_from_acpi(iommu, dev_i,
+							flags, ext_flags);
 			}
 			break;
 		default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042..0a1c283 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@
 #ifdef CONFIG_X86_X2APIC
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
-static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
@@ -149,7 +148,6 @@
 		return 0;
 	}
 
-	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216f..90b5e6e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@
 	return;
 }
 
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
 {
-	unsigned int v;
-	int i, j;
+	int i;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
+	printk(KERN_DEBUG);
+
+	for (i = 0; i < 8; i++)
+		printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+	printk(KERN_CONT "\n");
 }
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@
 	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
 
 	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
+	print_APIC_field(APIC_ISR);
 	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
+	print_APIC_field(APIC_TMR);
 	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
+	print_APIC_field(APIC_IRR);
 
 	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
 		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64..2a50ef8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@
 static int transition_fid_vid(struct powernow_k8_data *data,
 		u32 reqfid, u32 reqvid)
 {
-	if (core_voltage_pre_transition(data, reqvid))
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
 		return 1;
 
 	if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@
 
 /* Phase 1 - core voltage transition ... setup voltage */
 static int core_voltage_pre_transition(struct powernow_k8_data *data,
-		u32 reqvid)
+		u32 reqvid, u32 reqfid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
-	u32 maxvid, lo;
+	u32 maxvid, lo, rvomult = 1;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
 		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
 	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
 	maxvid = 0x1f & (maxvid >> 16);
 	dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@
 			return 1;
 	}
 
-	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
 		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
@@ -384,13 +388,6 @@
 	u32 vcoreqfid, vcocurrfid, vcofiddiff;
 	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
-				"0x%x 0x%x\n", reqfid, data->currfid);
-		return 1;
-	}
-
 	if (data->currfid == reqfid) {
 		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
 				data->currfid);
@@ -407,6 +404,9 @@
 	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
 	    : vcoreqfid - vcocurrfid;
 
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
 	while (vcofiddiff > 2) {
 		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
 
@@ -1081,14 +1081,6 @@
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX
-		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
-		       data->currfid, fid);
-		return 1;
-	}
-
 	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), fid, vid);
 	freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@
 {
 	static const char ACPI_PSS_BIOS_BUG_MSG[] =
 		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
-		KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+		FW_BUG PFX "Try again with latest BIOS.\n";
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190..02ce824 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
 
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
 static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index af425b8..484c1e5 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@
 		       m->cs, m->ip);
 		if (m->cs == __KERNEL_CS)
 			print_symbol("{%s}", m->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 	printk(KERN_EMERG "TSC %llx ", m->tsc);
 	if (m->addr)
-		printk("ADDR %llx ", m->addr);
+		printk(KERN_CONT "ADDR %llx ", m->addr);
 	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
+		printk(KERN_CONT "MISC %llx ", m->misc);
+	printk(KERN_CONT "\n");
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
@@ -209,13 +209,13 @@
 
 static void print_mce_head(void)
 {
-	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+	printk(KERN_EMERG "\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6..e60ed74 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
-
-int lapic_watchdog_ok(void)
-{
-	return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa3..5cb5725 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@
 #ifdef CONFIG_X86_64
 	if (!found) {
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
-		       "address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
-		       "registers may break!\n");
+		printk(KERN_ERR
+	"PCI: Warning: Cannot find a gap in the 32bit address range\n"
+	"PCI: Unassigned devices with 32bit resource registers may break!\n");
 	}
 #endif
 
@@ -1383,6 +1382,8 @@
 	return 32*1024*1024;
 }
 
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
 void __init e820_reserve_resources_late(void)
 {
 	int i;
@@ -1400,17 +1401,19 @@
 	 * avoid stolen RAM:
 	 */
 	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *entry = &e820_saved.map[i];
-		resource_size_t start, end;
+		struct e820entry *entry = &e820.map[i];
+		u64 start, end;
 
 		if (entry->type != E820_RAM)
 			continue;
 		start = entry->addr + entry->size;
-		end = round_up(start, ram_alignment(start));
-		if (start == end)
+		end = round_up(start, ram_alignment(start)) - 1;
+		if (end > MAX_RESOURCE_SIZE)
+			end = MAX_RESOURCE_SIZE;
+		if (start >= end)
 			continue;
-		reserve_region_with_split(&iomem_resource, start,
-						  end - 1, "RAM buffer");
+		reserve_region_with_split(&iomem_resource, start, end,
+					  "RAM buffer");
 	}
 }
 
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad..c664d51 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@
 	state->mode = paravirt_get_lazy_mode();
 }
 
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
 {
 	pv_info.name = "KVM";
 	pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 4763047..1a041bc 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@
 #ifdef CONFIG_SWIOTLB
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
+#endif
 		if (!strncmp(p, "pt", 2)) {
 			iommu_pass_through = 1;
 			return 1;
 		}
-#endif
 
 		gart_parse_options(p);
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f90..d2e56b8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@
  nommu:
 	/* Should not happen anymore */
 	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_WARNING "falling back to iommu=soft.\n");
+	       "falling back to iommu=soft.\n");
 	return -1;
 }
 
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78..ebeafcc 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
  * Zero a page. 	
  * rdi	page
  */			
-	ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
 	CFI_STARTPROC
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep stosq
 	ret
 	CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
 
 ENTRY(clear_page)
 	CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c11..6ba0f7b 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@
 	jae bad_to_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
+ENDPROC(copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
 ENTRY(copy_from_user)
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff..85307cc 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@
 }
 
 static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR 
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
 
 /*
  * No vm86 mode in 64-bit mode:
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 47ce9a2..0607119 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
+#include <asm/proto.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index b177652..6176fe8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,8 +598,15 @@
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
-	/* clear the default setting with node 0 */
-	nodes_clear(node_states[N_NORMAL_MEMORY]);
+
+	/*
+	 * clear the default setting with node 0
+	 * note: don't use nodes_clear here, that is really clearing when
+	 *	 numa support is not compiled in, and later node_set_state
+	 *	 will not set it back.
+	 */
+	node_clear_state(0, N_NORMAL_MEMORY);
+
 	free_area_init_nodes(max_zone_pfns);
 }
 
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626d..1014eb4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@
 	unsigned long flags;
 	struct resource *root;
 	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+	u64 start, end;
+
+	if (bus_has_transparent_bridge(info->bus))
+		max_root_bus_resources -= 3;
 
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@
 	} else
 		return AE_OK;
 
-	res = &info->res[info->res_num];
-	res->name = info->name;
-	res->flags = flags;
-	res->start = addr.minimum + addr.translation_offset;
-	res->end = res->start + addr.address_length - 1;
-	res->child = NULL;
-
-	if (bus_has_transparent_bridge(info->bus))
-		max_root_bus_resources -= 3;
+	start = addr.minimum + addr.translation_offset;
+	end = start + addr.address_length - 1;
 	if (info->res_num >= max_root_bus_resources) {
 		printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s due to _CRS returning more than "
-			"%d resource descriptors\n", (unsigned long) res->start,
-			(unsigned long) res->end, root->name, info->name,
+			"%d resource descriptors\n", (unsigned long) start,
+			(unsigned long) end, root->name, info->name,
 			max_root_bus_resources);
-		info->res_num++;
 		return AE_OK;
 	}
 
+	res = &info->res[info->res_num];
+	res->name = info->name;
+	res->flags = flags;
+	res->start = start;
+	res->end = end;
+	res->child = NULL;
+
 	if (insert_resource(root, res)) {
 		printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@
 }
 
 static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		int i;
-		u16 class = dev->class >> 8;
-
-		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
-			for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
-				dev->subordinate->resource[i] =
-						dev->bus->resource[i - 3];
-		}
-	}
-}
-
-static void
 get_current_resources(struct acpi_device *device, int busnum,
 			int domain, struct pci_bus *bus)
 {
@@ -158,8 +144,6 @@
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
-	if (info.res_num)
-		adjust_transparent_bridge_resources(bus);
 
 	return;
 
@@ -222,8 +206,15 @@
 		 */
 		memcpy(bus->sysdata, sd, sizeof(*sd));
 		kfree(sd);
-	} else
-		bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+	} else {
+		bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+		if (bus) {
+			if (pci_probe & PCI_USE__CRS)
+				get_current_resources(device, busnum, domain,
+							bus);
+			bus->subordinate = pci_scan_child_bus(bus);
+		}
+	}
 
 	if (!bus)
 		kfree(sd);
@@ -238,8 +229,6 @@
 #endif
 	}
 
-	if (bus && (pci_probe & PCI_USE__CRS))
-		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
 
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a..3ffa10d 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@
 	int j;
 	struct pci_root_info *info;
 
-	/* don't go for it if _CRS is used */
-	if (pci_probe & PCI_USE__CRS)
+	/* don't go for it if _CRS is used already */
+	if (b->resource[0] != &ioport_resource ||
+	    b->resource[1] != &iomem_resource)
 		return;
 
 	/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@
 	if (i == pci_root_num)
 		return;
 
+	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+			b->number);
+
 	info = &pci_root_info[i];
 	for (j = 0; j < info->res_num; j++) {
 		struct resource *res;
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd..a6a198c 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
 # __restore_processor_state() restores %gs after S3 resume and so should not
 # itself be stack-protected
 nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o	:= $(nostackp)
+CFLAGS_cpu.o	:= $(nostackp)
 
 obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab93..e64efac 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@
 
 	for (i = 0; i < 16; i++) {
 		if ((i % 8) == 0)
-			printk ("\n" KERN_INFO "a%02d: ", i);
-		printk("%08lx ", regs->areg[i]);
+			printk(KERN_INFO "a%02d:", i);
+		printk(KERN_CONT " %08lx", regs->areg[i]);
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
 	       regs->pc, regs->ps, regs->depc, regs->excvaddr);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 39ce644..e199967 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -350,6 +350,12 @@
 	if (blk_integrity_rq(req) != blk_integrity_rq(next))
 		return 0;
 
+	/* don't merge requests of different failfast settings */
+	if (blk_failfast_dev(req)	!= blk_failfast_dev(next)	||
+	    blk_failfast_transport(req)	!= blk_failfast_transport(next)	||
+	    blk_failfast_driver(req)	!= blk_failfast_driver(next))
+		return 0;
+
 	/*
 	 * If we are allowed to merge, then append bio list
 	 * from next to rq and release next. merge_requests_fn
diff --git a/block/elevator.c b/block/elevator.c
index ca86192..6f23753 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -100,6 +100,14 @@
 	if (bio_integrity(bio) != blk_integrity_rq(rq))
 		return 0;
 
+	/*
+	 * Don't merge if failfast settings don't match
+	 */
+	if (bio_failfast_dev(bio)	!= blk_failfast_dev(rq)		||
+	    bio_failfast_transport(bio)	!= blk_failfast_transport(rq)	||
+	    bio_failfast_driver(bio)	!= blk_failfast_driver(rq))
+		return 0;
+
 	if (!elv_iosched_allow_merge(rq, bio))
 		return 0;
 
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 3d763fd..2466506 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -207,6 +207,16 @@
 	void __iomem *tmp;
 	int i, ret;
 
+	device_initialize(&dev->dev);
+
+	/*
+	 * Copy from device_add
+	 */
+	if (dev->dev.init_name) {
+		dev_set_name(&dev->dev, "%s", dev->dev.init_name);
+		dev->dev.init_name = NULL;
+	}
+
 	dev->dev.release = amba_device_release;
 	dev->dev.bus = &amba_bustype;
 	dev->dev.dma_mask = &dev->dma_mask;
@@ -240,7 +250,7 @@
 		goto err_release;
 	}
 
-	ret = device_register(&dev->dev);
+	ret = device_add(&dev->dev);
 	if (ret)
 		goto err_release;
 
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index ddeb819..fc46653 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -357,7 +357,7 @@
 	kfree(fw_priv->pages);
 	kfree(fw_priv->fw_id);
 	kfree(fw_priv);
-	put_device(dev);
+	kfree(dev);
 
 	module_put(THIS_MODULE);
 }
@@ -408,13 +408,11 @@
 	if (retval) {
 		dev_err(device, "%s: device_register failed\n", __func__);
 		put_device(f_dev);
-		goto error_kfree_fw_id;
+		return retval;
 	}
 	*dev_p = f_dev;
 	return 0;
 
-error_kfree_fw_id:
-	kfree(fw_priv->fw_id);
 error_kfree:
 	kfree(f_dev);
 	kfree(fw_priv);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index fae7254..58a3e57 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -762,6 +762,7 @@
 			dev->power.status = DPM_ON;
 			if (error == -EAGAIN) {
 				put_device(dev);
+				error = 0;
 				continue;
 			}
 			printk(KERN_ERR "PM: Failed to prepare device %s "
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 9c6e5b0..2f07b7c 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1645,7 +1645,7 @@
 {
 	int drive,drives,nomem;
 
-	printk(KERN_INFO "FD: probing units\n" KERN_INFO "found ");
+	printk(KERN_INFO "FD: probing units\nfound ");
 	drives=0;
 	nomem=0;
 	for(drive=0;drive<FD_MAX_UNITS;drive++) {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c7a527c..65a0655 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -226,8 +226,18 @@
 
 static inline void removeQ(CommandList_struct *c)
 {
-	if (WARN_ON(hlist_unhashed(&c->list)))
+	/*
+	 * After kexec/dump some commands might still
+	 * be in flight, which the firmware will try
+	 * to complete. Resetting the firmware doesn't work
+	 * with old fw revisions, so we have to mark
+	 * them off as 'stale' to prevent the driver from
+	 * falling over.
+	 */
+	if (WARN_ON(hlist_unhashed(&c->list))) {
+		c->cmd_type = CMD_MSG_STALE;
 		return;
+	}
 
 	hlist_del_init(&c->list);
 }
@@ -4246,7 +4256,8 @@
 	while (!hlist_empty(&h->cmpQ)) {
 		c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
 		removeQ(c);
-		c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+		if (c->cmd_type != CMD_MSG_STALE)
+			c->err_info->CommandStatus = CMD_HARDWARE_ERR;
 		if (c->cmd_type == CMD_RWREQ) {
 			complete_command(h, c, 0);
 		} else if (c->cmd_type == CMD_IOCTL_PEND)
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index cd665b0..dbaed1e 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -274,6 +274,7 @@
 #define CMD_SCSI	0x03
 #define CMD_MSG_DONE	0x04
 #define CMD_MSG_TIMEOUT 0x05
+#define CMD_MSG_STALE	0xff
 
 /* This structure needs to be divisible by 8 for new
  * indexing method.
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f08491a..b20abe10 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -390,9 +390,10 @@
 
 static void ace_dump_regs(struct ace_device *ace)
 {
-	dev_info(ace->dev, "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"
-		 KERN_INFO "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"
-		 KERN_INFO "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",
+	dev_info(ace->dev,
+		 "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"
+		 "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"
+		 "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",
 		 ace_in32(ace, ACE_CTRL),
 		 ace_in(ace, ACE_SECCNTCMD),
 		 ace_in(ace, ACE_VERSION),
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 0bd01f4..6a06913 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1029,10 +1029,6 @@
 
 	  If compiled as a module, it will be called cs5535_gpio.
 
-config GPIO_VR41XX
-	tristate "NEC VR4100 series General-purpose I/O Unit support"
-	depends on CPU_VR41XX
-
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 189efcf..66f779a 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -95,7 +95,6 @@
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
 obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
 obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
 
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5dcbe60..91b53eb 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -305,10 +305,11 @@
 	     (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
 	    == BIOS_CNTL_LOCK_ENABLE_MASK) {
 		static __initdata /*const*/ char warning[] =
-			KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
-			KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
-			KERN_WARNING PFX "you are certain that your system has a functional\n"
-			KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+			KERN_WARNING
+PFX "Firmware space is locked read-only. If you can't or\n"
+PFX "don't want to disable this in firmware setup, and if\n"
+PFX "you are certain that your system has a functional\n"
+PFX "RNG, try using the 'no_fwh_detect' option.\n";
 
 		if (no_fwh_detect)
 			return -ENODEV;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4159292..621d118 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1478,10 +1478,10 @@
 		status = inw(base + 0x4);
 		if (status != 0) {
 			dev_warn(&pdev->dev, "Card%d rejected load header:\n"
-				KERN_WARNING "Address:0x%x\n"
-				KERN_WARNING "Count:0x%x\n"
-				KERN_WARNING "Status:0x%x\n",
-				index + 1, frame->addr, frame->count, status);
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status:0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
 			goto errrelfw;
 		}
 		outsw(base, frame->data, word_count);
@@ -1526,10 +1526,10 @@
 		status = inw(base + 0x4);
 		if (status != 0) {
 			dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
-				KERN_WARNING "Address:0x%x\n"
-				KERN_WARNING "Count:0x%x\n"
-				KERN_WARNING "Status: 0x%x\n",
-				index + 1, frame->addr, frame->count, status);
+				 "Address:0x%x\n"
+				 "Count:0x%x\n"
+				 "Status: 0x%x\n",
+				 index + 1, frame->addr, frame->count, status);
 			goto errrelfw;
 		}
 
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index daebe1b..9d1b4f5 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -75,114 +75,88 @@
  */
 static void pty_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *o_tty = tty->link;
-
-	if (!o_tty)
-		return;
-
-	tty_wakeup(o_tty);
+	tty_wakeup(tty->link);
 	set_bit(TTY_THROTTLED, &tty->flags);
 }
 
-/*
- * WSH 05/24/97: modified to
- *   (1) use space in tty->flip instead of a shared temp buffer
- *	 The flip buffers aren't being used for a pty, so there's lots
- *	 of space available.  The buffer is protected by a per-pty
- *	 semaphore that should almost never come under contention.
- *   (2) avoid redundant copying for cases where count >> receive_room
- * N.B. Calls from user space may now return an error code instead of
- * a count.
+/**
+ *	pty_space	-	report space left for writing
+ *	@to: tty we are writing into
  *
- * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just wait on the other one blindly without
- * risking deadlocks. At some point when everything has settled down we need
- * to look into making pty_write at least able to sleep over an ldisc change.
- *
- * The return on no ldisc is a bit counter intuitive but the logic works
- * like this. During an ldisc change the other end will flush its buffers. We
- * thus return the full length which is identical to the case where we had
- * proper locking and happened to queue the bytes just before the flush during
- * the ldisc change.
+ *	The tty buffers allow 64K but we sneak a peak and clip at 8K this
+ *	allows a lot of overspill room for echo and other fun messes to
+ *	be handled properly
  */
+
+static int pty_space(struct tty_struct *to)
+{
+	int n = 8192 - to->buf.memory_used;
+	if (n < 0)
+		return 0;
+	return n;
+}
+
+/**
+ *	pty_write		-	write to a pty
+ *	@tty: the tty we write from
+ *	@buf: kernel buffer of data
+ *	@count: bytes to write
+ *
+ *	Our "hardware" write method. Data is coming from the ldisc which
+ *	may be in a non sleeping state. We simply throw this at the other
+ *	end of the link as if we were an IRQ handler receiving stuff for
+ *	the other side of the pty/tty pair.
+ */
+
 static int pty_write(struct tty_struct *tty, const unsigned char *buf,
 								int count)
 {
 	struct tty_struct *to = tty->link;
-	struct tty_ldisc *ld;
-	int c = count;
+	int c;
 
-	if (!to || tty->stopped)
+	if (tty->stopped)
 		return 0;
-	ld = tty_ldisc_ref(to);
 
-	if (ld) {
-		c = to->receive_room;
-		if (c > count)
-			c = count;
-		ld->ops->receive_buf(to, buf, NULL, c);
-		tty_ldisc_deref(ld);
+	/* This isn't locked but our 8K is quite sloppy so no
+	   big deal */
+
+	c = pty_space(to);
+	if (c > count)
+		c = count;
+	if (c > 0) {
+		/* Stuff the data into the input queue of the other end */
+		c = tty_insert_flip_string(to, buf, c);
+		/* And shovel */
+		tty_flip_buffer_push(to);
+		tty_wakeup(tty);
 	}
 	return c;
 }
 
+/**
+ *	pty_write_room	-	write space
+ *	@tty: tty we are writing from
+ *
+ *	Report how many bytes the ldisc can send into the queue for
+ *	the other device.
+ */
+
 static int pty_write_room(struct tty_struct *tty)
 {
-	struct tty_struct *to = tty->link;
-
-	if (!to || tty->stopped)
-		return 0;
-
-	return to->receive_room;
+	return pty_space(tty->link);
 }
 
-/*
- *	WSH 05/24/97:  Modified for asymmetric MASTER/SLAVE behavior
- *	The chars_in_buffer() value is used by the ldisc select() function
- *	to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
- *	The pty driver chars_in_buffer() Master/Slave must behave differently:
+/**
+ *	pty_chars_in_buffer	-	characters currently in our tx queue
+ *	@tty: our tty
  *
- *      The Master side needs to allow typed-ahead commands to accumulate
- *      while being canonicalized, so we report "our buffer" as empty until
- *	some threshold is reached, and then report the count. (Any count >
- *	WAKEUP_CHARS is regarded by select() as "full".)  To avoid deadlock
- *	the count returned must be 0 if no canonical data is available to be
- *	read. (The N_TTY ldisc.chars_in_buffer now knows this.)
- *
- *	The Slave side passes all characters in raw mode to the Master side's
- *	buffer where they can be read immediately, so in this case we can
- *	return the true count in the buffer.
+ *	Report how much we have in the transmit queue. As everything is
+ *	instantly at the other end this is easy to implement.
  */
+
 static int pty_chars_in_buffer(struct tty_struct *tty)
 {
-	struct tty_struct *to = tty->link;
-	struct tty_ldisc *ld;
-	int count = 0;
-
-	/* We should get the line discipline lock for "tty->link" */
-	if (!to)
-		return 0;
-	/* We cannot take a sleeping reference here without deadlocking with
-	   an ldisc change - but it doesn't really matter */
-	ld = tty_ldisc_ref(to);
-	if (ld == NULL)
-		return 0;
-
-	/* The ldisc must report 0 if no characters available to be read */
-	if (ld->ops->chars_in_buffer)
-		count = ld->ops->chars_in_buffer(to);
-
-	tty_ldisc_deref(ld);
-
-	if (tty->driver->subtype == PTY_TYPE_SLAVE)
-		return count;
-
-	/* Master side driver ... if the other side's read buffer is less than
-	 * half full, return 0 to allow writers to proceed; otherwise return
-	 * the count.  This leaves a comfortable margin to avoid overflow,
-	 * and still allows half a buffer's worth of typed-ahead commands.
-	 */
-	return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
+	return 0;
 }
 
 /* Set the lock flag on a pty */
@@ -202,20 +176,10 @@
 {
 	struct tty_struct *to = tty->link;
 	unsigned long flags;
-	struct tty_ldisc *ld;
 
 	if (!to)
 		return;
-	ld = tty_ldisc_ref(to);
-
-	/* The other end is changing discipline */
-	if (!ld)
-		return;
-
-	if (ld->ops->flush_buffer)
-		to->ldisc->ops->flush_buffer(to);
-	tty_ldisc_deref(ld);
-
+	/* tty_buffer_flush(to); FIXME */
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
 		tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index 6062b62..b3ec9b1 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for TANBAC TB0219 base board.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
 #include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/tb0219.h>
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("TANBAC TB0219 base board driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
index 54c8372..e69de29 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/char/vr41xx_giu.c
@@ -1,680 +0,0 @@
-/*
- *  Driver for NEC VR4100 series General-purpose I/O Unit.
- *
- *  Copyright (C) 2002 MontaVista Software Inc.
- *	Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/vr41xx/giu.h>
-#include <asm/vr41xx/irq.h>
-#include <asm/vr41xx/vr41xx.h>
-
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
-MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
-MODULE_LICENSE("GPL");
-
-static int major;	/* default is dynamic major device number */
-module_param(major, int, 0);
-MODULE_PARM_DESC(major, "Major device number");
-
-#define GIUIOSELL	0x00
-#define GIUIOSELH	0x02
-#define GIUPIODL	0x04
-#define GIUPIODH	0x06
-#define GIUINTSTATL	0x08
-#define GIUINTSTATH	0x0a
-#define GIUINTENL	0x0c
-#define GIUINTENH	0x0e
-#define GIUINTTYPL	0x10
-#define GIUINTTYPH	0x12
-#define GIUINTALSELL	0x14
-#define GIUINTALSELH	0x16
-#define GIUINTHTSELL	0x18
-#define GIUINTHTSELH	0x1a
-#define GIUPODATL	0x1c
-#define GIUPODATEN	0x1c
-#define GIUPODATH	0x1e
- #define PIOEN0		0x0100
- #define PIOEN1		0x0200
-#define GIUPODAT	0x1e
-#define GIUFEDGEINHL	0x20
-#define GIUFEDGEINHH	0x22
-#define GIUREDGEINHL	0x24
-#define GIUREDGEINHH	0x26
-
-#define GIUUSEUPDN	0x1e0
-#define GIUTERMUPDN	0x1e2
-
-#define GPIO_HAS_PULLUPDOWN_IO		0x0001
-#define GPIO_HAS_OUTPUT_ENABLE		0x0002
-#define GPIO_HAS_INTERRUPT_EDGE_SELECT	0x0100
-
-static spinlock_t giu_lock;
-static unsigned long giu_flags;
-static unsigned int giu_nr_pins;
-
-static void __iomem *giu_base;
-
-#define giu_read(offset)		readw(giu_base + (offset))
-#define giu_write(offset, value)	writew((value), giu_base + (offset))
-
-#define GPIO_PIN_OF_IRQ(irq)	((irq) - GIU_IRQ_BASE)
-#define GIUINT_HIGH_OFFSET	16
-#define GIUINT_HIGH_MAX		32
-
-static inline uint16_t giu_set(uint16_t offset, uint16_t set)
-{
-	uint16_t data;
-
-	data = giu_read(offset);
-	data |= set;
-	giu_write(offset, data);
-
-	return data;
-}
-
-static inline uint16_t giu_clear(uint16_t offset, uint16_t clear)
-{
-	uint16_t data;
-
-	data = giu_read(offset);
-	data &= ~clear;
-	giu_write(offset, data);
-
-	return data;
-}
-
-static void ack_giuint_low(unsigned int irq)
-{
-	giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static void mask_giuint_low(unsigned int irq)
-{
-	giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static void mask_ack_giuint_low(unsigned int irq)
-{
-	unsigned int pin;
-
-	pin = GPIO_PIN_OF_IRQ(irq);
-	giu_clear(GIUINTENL, 1 << pin);
-	giu_write(GIUINTSTATL, 1 << pin);
-}
-
-static void unmask_giuint_low(unsigned int irq)
-{
-	giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
-}
-
-static struct irq_chip giuint_low_irq_chip = {
-	.name		= "GIUINTL",
-	.ack		= ack_giuint_low,
-	.mask		= mask_giuint_low,
-	.mask_ack	= mask_ack_giuint_low,
-	.unmask		= unmask_giuint_low,
-};
-
-static void ack_giuint_high(unsigned int irq)
-{
-	giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static void mask_giuint_high(unsigned int irq)
-{
-	giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static void mask_ack_giuint_high(unsigned int irq)
-{
-	unsigned int pin;
-
-	pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET;
-	giu_clear(GIUINTENH, 1 << pin);
-	giu_write(GIUINTSTATH, 1 << pin);
-}
-
-static void unmask_giuint_high(unsigned int irq)
-{
-	giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
-}
-
-static struct irq_chip giuint_high_irq_chip = {
-	.name		= "GIUINTH",
-	.ack		= ack_giuint_high,
-	.mask		= mask_giuint_high,
-	.mask_ack	= mask_ack_giuint_high,
-	.unmask		= unmask_giuint_high,
-};
-
-static int giu_get_irq(unsigned int irq)
-{
-	uint16_t pendl, pendh, maskl, maskh;
-	int i;
-
-	pendl = giu_read(GIUINTSTATL);
-	pendh = giu_read(GIUINTSTATH);
-	maskl = giu_read(GIUINTENL);
-	maskh = giu_read(GIUINTENH);
-
-	maskl &= pendl;
-	maskh &= pendh;
-
-	if (maskl) {
-		for (i = 0; i < 16; i++) {
-			if (maskl & (1 << i))
-				return GIU_IRQ(i);
-		}
-	} else if (maskh) {
-		for (i = 0; i < 16; i++) {
-			if (maskh & (1 << i))
-				return GIU_IRQ(i + GIUINT_HIGH_OFFSET);
-		}
-	}
-
-	printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
-	       maskl, pendl, maskh, pendh);
-
-	atomic_inc(&irq_err_count);
-
-	return -EINVAL;
-}
-
-void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal)
-{
-	uint16_t mask;
-
-	if (pin < GIUINT_HIGH_OFFSET) {
-		mask = 1 << pin;
-		if (trigger != IRQ_TRIGGER_LEVEL) {
-        		giu_set(GIUINTTYPL, mask);
-			if (signal == IRQ_SIGNAL_HOLD)
-				giu_set(GIUINTHTSELL, mask);
-			else
-				giu_clear(GIUINTHTSELL, mask);
-			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
-				switch (trigger) {
-				case IRQ_TRIGGER_EDGE_FALLING:
-					giu_set(GIUFEDGEINHL, mask);
-					giu_clear(GIUREDGEINHL, mask);
-					break;
-				case IRQ_TRIGGER_EDGE_RISING:
-					giu_clear(GIUFEDGEINHL, mask);
-					giu_set(GIUREDGEINHL, mask);
-					break;
-				default:
-					giu_set(GIUFEDGEINHL, mask);
-					giu_set(GIUREDGEINHL, mask);
-					break;
-				}
-			}
-			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_low_irq_chip,
-			                         handle_edge_irq);
-		} else {
-			giu_clear(GIUINTTYPL, mask);
-			giu_clear(GIUINTHTSELL, mask);
-			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_low_irq_chip,
-			                         handle_level_irq);
-		}
-		giu_write(GIUINTSTATL, mask);
-	} else if (pin < GIUINT_HIGH_MAX) {
-		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
-		if (trigger != IRQ_TRIGGER_LEVEL) {
-			giu_set(GIUINTTYPH, mask);
-			if (signal == IRQ_SIGNAL_HOLD)
-				giu_set(GIUINTHTSELH, mask);
-			else
-				giu_clear(GIUINTHTSELH, mask);
-			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
-				switch (trigger) {
-				case IRQ_TRIGGER_EDGE_FALLING:
-					giu_set(GIUFEDGEINHH, mask);
-					giu_clear(GIUREDGEINHH, mask);
-					break;
-				case IRQ_TRIGGER_EDGE_RISING:
-					giu_clear(GIUFEDGEINHH, mask);
-					giu_set(GIUREDGEINHH, mask);
-					break;
-				default:
-					giu_set(GIUFEDGEINHH, mask);
-					giu_set(GIUREDGEINHH, mask);
-					break;
-				}
-			}
-			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_high_irq_chip,
-			                         handle_edge_irq);
-		} else {
-			giu_clear(GIUINTTYPH, mask);
-			giu_clear(GIUINTHTSELH, mask);
-			set_irq_chip_and_handler(GIU_IRQ(pin),
-			                         &giuint_high_irq_chip,
-			                         handle_level_irq);
-		}
-		giu_write(GIUINTSTATH, mask);
-	}
-}
-EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
-
-void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
-{
-	uint16_t mask;
-
-	if (pin < GIUINT_HIGH_OFFSET) {
-		mask = 1 << pin;
-		if (level == IRQ_LEVEL_HIGH)
-			giu_set(GIUINTALSELL, mask);
-		else
-			giu_clear(GIUINTALSELL, mask);
-		giu_write(GIUINTSTATL, mask);
-	} else if (pin < GIUINT_HIGH_MAX) {
-		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
-		if (level == IRQ_LEVEL_HIGH)
-			giu_set(GIUINTALSELH, mask);
-		else
-			giu_clear(GIUINTALSELH, mask);
-		giu_write(GIUINTSTATH, mask);
-	}
-}
-EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
-
-gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
-{
-	uint16_t reg, mask;
-
-	if (pin >= giu_nr_pins)
-		return GPIO_DATA_INVAL;
-
-	if (pin < 16) {
-		reg = giu_read(GIUPIODL);
-		mask = (uint16_t)1 << pin;
-	} else if (pin < 32) {
-		reg = giu_read(GIUPIODH);
-		mask = (uint16_t)1 << (pin - 16);
-	} else if (pin < 48) {
-		reg = giu_read(GIUPODATL);
-		mask = (uint16_t)1 << (pin - 32);
-	} else {
-		reg = giu_read(GIUPODATH);
-		mask = (uint16_t)1 << (pin - 48);
-	}
-
-	if (reg & mask)
-		return GPIO_DATA_HIGH;
-
-	return GPIO_DATA_LOW;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
-
-int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
-{
-	uint16_t offset, mask, reg;
-	unsigned long flags;
-
-	if (pin >= giu_nr_pins)
-		return -EINVAL;
-
-	if (pin < 16) {
-		offset = GIUPIODL;
-		mask = (uint16_t)1 << pin;
-	} else if (pin < 32) {
-		offset = GIUPIODH;
-		mask = (uint16_t)1 << (pin - 16);
-	} else if (pin < 48) {
-		offset = GIUPODATL;
-		mask = (uint16_t)1 << (pin - 32);
-	} else {
-		offset = GIUPODATH;
-		mask = (uint16_t)1 << (pin - 48);
-	}
-
-	spin_lock_irqsave(&giu_lock, flags);
-
-	reg = giu_read(offset);
-	if (data == GPIO_DATA_HIGH)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	giu_write(offset, reg);
-
-	spin_unlock_irqrestore(&giu_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
-
-int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
-{
-	uint16_t offset, mask, reg;
-	unsigned long flags;
-
-	if (pin >= giu_nr_pins)
-		return -EINVAL;
-
-	if (pin < 16) {
-		offset = GIUIOSELL;
-		mask = (uint16_t)1 << pin;
-	} else if (pin < 32) {
-		offset = GIUIOSELH;
-		mask = (uint16_t)1 << (pin - 16);
-	} else {
-		if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
-			offset = GIUPODATEN;
-			mask = (uint16_t)1 << (pin - 32);
-		} else {
-			switch (pin) {
-			case 48:
-				offset = GIUPODATH;
-				mask = PIOEN0;
-				break;
-			case 49:
-				offset = GIUPODATH;
-				mask = PIOEN1;
-				break;
-			default:
-				return -EINVAL;
-			}
-		}
-	}
-
-	spin_lock_irqsave(&giu_lock, flags);
-
-	reg = giu_read(offset);
-	if (dir == GPIO_OUTPUT)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	giu_write(offset, reg);
-
-	spin_unlock_irqrestore(&giu_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
-
-int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
-{
-	uint16_t reg, mask;
-	unsigned long flags;
-
-	if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
-		return -EPERM;
-
-	if (pin >= 15)
-		return -EINVAL;
-
-	mask = (uint16_t)1 << pin;
-
-	spin_lock_irqsave(&giu_lock, flags);
-
-	if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) {
-		reg = giu_read(GIUTERMUPDN);
-		if (pull == GPIO_PULL_UP)
-			reg |= mask;
-		else
-			reg &= ~mask;
-		giu_write(GIUTERMUPDN, reg);
-
-		reg = giu_read(GIUUSEUPDN);
-		reg |= mask;
-		giu_write(GIUUSEUPDN, reg);
-	} else {
-		reg = giu_read(GIUUSEUPDN);
-		reg &= ~mask;
-		giu_write(GIUUSEUPDN, reg);
-	}
-
-	spin_unlock_irqrestore(&giu_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
-
-static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
-                         loff_t *ppos)
-{
-	unsigned int pin;
-	char value = '0';
-
-	pin = iminor(file->f_path.dentry->d_inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH)
-		value = '1';
-
-	if (len <= 0)
-		return -EFAULT;
-
-	if (put_user(value, buf))
-		return -EFAULT;
-
-	return 1;
-}
-
-static ssize_t gpio_write(struct file *file, const char __user *data,
-                          size_t len, loff_t *ppos)
-{
-	unsigned int pin;
-	size_t i;
-	char c;
-	int retval = 0;
-
-	pin = iminor(file->f_path.dentry->d_inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	for (i = 0; i < len; i++) {
-		if (get_user(c, data + i))
-			return -EFAULT;
-
-		switch (c) {
-		case '0':
-			retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW);
-			break;
-		case '1':
-			retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH);
-			break;
-		case 'D':
-			printk(KERN_INFO "GPIO%d: pull down\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN);
-			break;
-		case 'd':
-			printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
-			break;
-		case 'I':
-			printk(KERN_INFO "GPIO%d: input\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT);
-			break;
-		case 'O':
-			printk(KERN_INFO "GPIO%d: output\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT);
-			break;
-		case 'o':
-			printk(KERN_INFO "GPIO%d: output disable\n", pin);
-			retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE);
-			break;
-		case 'P':
-			printk(KERN_INFO "GPIO%d: pull up\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP);
-			break;
-		case 'p':
-			printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
-			retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
-			break;
-		default:
-			break;
-		}
-
-		if (retval < 0)
-			break;
-	}
-
-	return i;
-}
-
-static int gpio_open(struct inode *inode, struct file *file)
-{
-	unsigned int pin;
-
-	cycle_kernel_lock();
-	pin = iminor(inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	return nonseekable_open(inode, file);
-}
-
-static int gpio_release(struct inode *inode, struct file *file)
-{
-	unsigned int pin;
-
-	pin = iminor(inode);
-	if (pin >= giu_nr_pins)
-		return -EBADF;
-
-	return 0;
-}
-
-static const struct file_operations gpio_fops = {
-	.owner		= THIS_MODULE,
-	.read		= gpio_read,
-	.write		= gpio_write,
-	.open		= gpio_open,
-	.release	= gpio_release,
-};
-
-static int __devinit giu_probe(struct platform_device *dev)
-{
-	struct resource *res;
-	unsigned int trigger, i, pin;
-	struct irq_chip *chip;
-	int irq, retval;
-
-	switch (dev->id) {
-	case GPIO_50PINS_PULLUPDOWN:
-		giu_flags = GPIO_HAS_PULLUPDOWN_IO;
-		giu_nr_pins = 50;
-		break;
-	case GPIO_36PINS:
-		giu_nr_pins = 36;
-		break;
-	case GPIO_48PINS_EDGE_SELECT:
-		giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
-		giu_nr_pins = 48;
-		break;
-	default:
-		printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
-		return -ENODEV;
-	}
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EBUSY;
-
-	giu_base = ioremap(res->start, res->end - res->start + 1);
-	if (!giu_base)
-		return -ENOMEM;
-
-	retval = register_chrdev(major, "GIU", &gpio_fops);
-	if (retval < 0) {
-		iounmap(giu_base);
-		giu_base = NULL;
-		return retval;
-	}
-
-	if (major == 0) {
-		major = retval;
-		printk(KERN_INFO "GIU: major number %d\n", major);
-	}
-
-	spin_lock_init(&giu_lock);
-
-	giu_write(GIUINTENL, 0);
-	giu_write(GIUINTENH, 0);
-
-	trigger = giu_read(GIUINTTYPH) << 16;
-	trigger |= giu_read(GIUINTTYPL);
-	for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
-		pin = GPIO_PIN_OF_IRQ(i);
-		if (pin < GIUINT_HIGH_OFFSET)
-			chip = &giuint_low_irq_chip;
-		else
-			chip = &giuint_high_irq_chip;
-
-		if (trigger & (1 << pin))
-			set_irq_chip_and_handler(i, chip, handle_edge_irq);
-		else
-			set_irq_chip_and_handler(i, chip, handle_level_irq);
-
-	}
-
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0 || irq >= nr_irqs)
-		return -EBUSY;
-
-	return cascade_irq(irq, giu_get_irq);
-}
-
-static int __devexit giu_remove(struct platform_device *dev)
-{
-	if (giu_base) {
-		iounmap(giu_base);
-		giu_base = NULL;
-	}
-
-	return 0;
-}
-
-static struct platform_driver giu_device_driver = {
-	.probe		= giu_probe,
-	.remove		= __devexit_p(giu_remove),
-	.driver		= {
-		.name	= "GIU",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init vr41xx_giu_init(void)
-{
-	return platform_driver_register(&giu_device_driver);
-}
-
-static void __exit vr41xx_giu_exit(void)
-{
-	platform_driver_unregister(&giu_device_driver);
-}
-
-module_init(vr41xx_giu_init);
-module_exit(vr41xx_giu_exit);
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 9ffb05f..93c2322 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -161,7 +161,7 @@
 	if (periodic)
 		sh_tmu_write(p, TCOR, delta);
 	else
-		sh_tmu_write(p, TCOR, 0);
+		sh_tmu_write(p, TCOR, 0xffffffff);
 
 	sh_tmu_write(p, TCNT, delta);
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 6e2ec0b..b90eda8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -761,6 +761,10 @@
  * cpufreq_add_dev - add a CPU device
  *
  * Adds the cpufreq interface for a CPU device.
+ *
+ * The Oracle says: try running cpufreq registration/unregistration concurrently
+ * with with cpu hotplugging and all hell will break loose. Tried to clean this
+ * mess up, but more thorough testing is needed. - Mathieu
  */
 static int cpufreq_add_dev(struct sys_device *sys_dev)
 {
@@ -772,9 +776,6 @@
 	struct sys_device *cpu_sys_dev;
 	unsigned long flags;
 	unsigned int j;
-#ifdef CONFIG_SMP
-	struct cpufreq_policy *managed_policy;
-#endif
 
 	if (cpu_is_offline(cpu))
 		return 0;
@@ -804,15 +805,12 @@
 		goto nomem_out;
 	}
 	if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) {
-		kfree(policy);
 		ret = -ENOMEM;
-		goto nomem_out;
+		goto err_free_policy;
 	}
 	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
-		free_cpumask_var(policy->cpus);
-		kfree(policy);
 		ret = -ENOMEM;
-		goto nomem_out;
+		goto err_free_cpumask;
 	}
 
 	policy->cpu = cpu;
@@ -820,7 +818,8 @@
 
 	/* Initially set CPU itself as the policy_cpu */
 	per_cpu(policy_cpu, cpu) = cpu;
-	lock_policy_rwsem_write(cpu);
+	ret = (lock_policy_rwsem_write(cpu) < 0);
+	WARN_ON(ret);
 
 	init_completion(&policy->kobj_unregister);
 	INIT_WORK(&policy->update, handle_update);
@@ -833,7 +832,7 @@
 	ret = cpufreq_driver->init(policy);
 	if (ret) {
 		dprintk("initialization failed\n");
-		goto err_out;
+		goto err_unlock_policy;
 	}
 	policy->user_policy.min = policy->min;
 	policy->user_policy.max = policy->max;
@@ -852,21 +851,29 @@
 #endif
 
 	for_each_cpu(j, policy->cpus) {
+		struct cpufreq_policy *managed_policy;
+
 		if (cpu == j)
 			continue;
 
 		/* Check for existing affected CPUs.
 		 * They may not be aware of it due to CPU Hotplug.
 		 */
-		managed_policy = cpufreq_cpu_get(j);		/* FIXME: Where is this released?  What about error paths? */
+		managed_policy = cpufreq_cpu_get(j);
 		if (unlikely(managed_policy)) {
 
 			/* Set proper policy_cpu */
 			unlock_policy_rwsem_write(cpu);
 			per_cpu(policy_cpu, cpu) = managed_policy->cpu;
 
-			if (lock_policy_rwsem_write(cpu) < 0)
-				goto err_out_driver_exit;
+			if (lock_policy_rwsem_write(cpu) < 0) {
+				/* Should not go through policy unlock path */
+				if (cpufreq_driver->exit)
+					cpufreq_driver->exit(policy);
+				ret = -EBUSY;
+				cpufreq_cpu_put(managed_policy);
+				goto err_free_cpumask;
+			}
 
 			spin_lock_irqsave(&cpufreq_driver_lock, flags);
 			cpumask_copy(managed_policy->cpus, policy->cpus);
@@ -877,12 +884,14 @@
 			ret = sysfs_create_link(&sys_dev->kobj,
 						&managed_policy->kobj,
 						"cpufreq");
-			if (ret)
-				goto err_out_driver_exit;
-
-			cpufreq_debug_enable_ratelimit();
-			ret = 0;
-			goto err_out_driver_exit; /* call driver->exit() */
+			if (!ret)
+				cpufreq_cpu_put(managed_policy);
+			/*
+			 * Success. We only needed to be added to the mask.
+			 * Call driver->exit() because only the cpu parent of
+			 * the kobj needed to call init().
+			 */
+			goto out_driver_exit; /* call driver->exit() */
 		}
 	}
 #endif
@@ -892,25 +901,25 @@
 	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
 				   "cpufreq");
 	if (ret)
-		goto err_out_driver_exit;
+		goto out_driver_exit;
 
 	/* set up files for this cpu device */
 	drv_attr = cpufreq_driver->attr;
 	while ((drv_attr) && (*drv_attr)) {
 		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 		drv_attr++;
 	}
 	if (cpufreq_driver->get) {
 		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 	}
 	if (cpufreq_driver->target) {
 		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
 		if (ret)
-			goto err_out_driver_exit;
+			goto err_out_kobj_put;
 	}
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
@@ -922,18 +931,22 @@
 
 	/* symlink affected CPUs */
 	for_each_cpu(j, policy->cpus) {
+		struct cpufreq_policy *managed_policy;
+
 		if (j == cpu)
 			continue;
 		if (!cpu_online(j))
 			continue;
 
 		dprintk("CPU %u already managed, adding link\n", j);
-		cpufreq_cpu_get(cpu);
+		managed_policy = cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
 					"cpufreq");
-		if (ret)
+		if (ret) {
+			cpufreq_cpu_put(managed_policy);
 			goto err_out_unregister;
+		}
 	}
 
 	policy->governor = NULL; /* to assure that the starting sequence is
@@ -965,17 +978,20 @@
 		per_cpu(cpufreq_cpu_data, j) = NULL;
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
+err_out_kobj_put:
 	kobject_put(&policy->kobj);
 	wait_for_completion(&policy->kobj_unregister);
 
-err_out_driver_exit:
+out_driver_exit:
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(policy);
 
-err_out:
+err_unlock_policy:
 	unlock_policy_rwsem_write(cpu);
+err_free_cpumask:
+	free_cpumask_var(policy->cpus);
+err_free_policy:
 	kfree(policy);
-
 nomem_out:
 	module_put(cpufreq_driver->owner);
 module_out:
@@ -1070,8 +1086,6 @@
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 #endif
 
-	unlock_policy_rwsem_write(cpu);
-
 	if (cpufreq_driver->target)
 		__cpufreq_governor(data, CPUFREQ_GOV_STOP);
 
@@ -1088,6 +1102,8 @@
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(data);
 
+	unlock_policy_rwsem_write(cpu);
+
 	free_cpumask_var(data->related_cpus);
 	free_cpumask_var(data->cpus);
 	kfree(data);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 7fc58af..5749050 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -63,22 +63,20 @@
 	unsigned int down_skip;
 	unsigned int requested_freq;
 	int cpu;
-	unsigned int enable:1;
+	/*
+	 * percpu mutex that serializes governor limit change with
+	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
+	 * when user is changing the governor or limits.
+	 */
+	struct mutex timer_mutex;
 };
 static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
 
 static unsigned int dbs_enable;	/* number of CPUs using this policy */
 
 /*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -143,9 +141,6 @@
 
 	struct cpufreq_policy *policy;
 
-	if (!this_dbs_info->enable)
-		return 0;
-
 	policy = this_dbs_info->cur_policy;
 
 	/*
@@ -488,18 +483,12 @@
 
 	delay -= jiffies % delay;
 
-	if (lock_policy_rwsem_write(cpu) < 0)
-		return;
-
-	if (!dbs_info->enable) {
-		unlock_policy_rwsem_write(cpu);
-		return;
-	}
+	mutex_lock(&dbs_info->timer_mutex);
 
 	dbs_check_cpu(dbs_info);
 
 	queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay);
-	unlock_policy_rwsem_write(cpu);
+	mutex_unlock(&dbs_info->timer_mutex);
 }
 
 static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -508,7 +497,6 @@
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 	delay -= jiffies % delay;
 
-	dbs_info->enable = 1;
 	INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
 	queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work,
 				delay);
@@ -516,7 +504,6 @@
 
 static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
 {
-	dbs_info->enable = 0;
 	cancel_delayed_work_sync(&dbs_info->work);
 }
 
@@ -535,9 +522,6 @@
 		if ((!cpu_online(cpu)) || (!policy->cur))
 			return -EINVAL;
 
-		if (this_dbs_info->enable) /* Already enabled */
-			break;
-
 		mutex_lock(&dbs_mutex);
 
 		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -561,6 +545,7 @@
 		this_dbs_info->down_skip = 0;
 		this_dbs_info->requested_freq = policy->cur;
 
+		mutex_init(&this_dbs_info->timer_mutex);
 		dbs_enable++;
 		/*
 		 * Start the timerschedule work, when this governor
@@ -590,17 +575,19 @@
 					&dbs_cpufreq_notifier_block,
 					CPUFREQ_TRANSITION_NOTIFIER);
 		}
-		dbs_timer_init(this_dbs_info);
-
 		mutex_unlock(&dbs_mutex);
 
+		dbs_timer_init(this_dbs_info);
+
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
 		dbs_timer_exit(this_dbs_info);
+
+		mutex_lock(&dbs_mutex);
 		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
 		dbs_enable--;
+		mutex_destroy(&this_dbs_info->timer_mutex);
 
 		/*
 		 * Stop the timerschedule work, when this governor
@@ -616,7 +603,7 @@
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
+		mutex_lock(&this_dbs_info->timer_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
@@ -625,7 +612,7 @@
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
 					policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
+		mutex_unlock(&this_dbs_info->timer_mutex);
 
 		break;
 	}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 1911d17..d6ba142 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -70,23 +70,21 @@
 	unsigned int freq_lo_jiffies;
 	unsigned int freq_hi_jiffies;
 	int cpu;
-	unsigned int enable:1,
-		sample_type:1;
+	unsigned int sample_type:1;
+	/*
+	 * percpu mutex that serializes governor limit change with
+	 * do_dbs_timer invocation. We do not want do_dbs_timer to run
+	 * when user is changing the governor or limits.
+	 */
+	struct mutex timer_mutex;
 };
 static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
 
 static unsigned int dbs_enable;	/* number of CPUs using this policy */
 
 /*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
  */
 static DEFINE_MUTEX(dbs_mutex);
 
@@ -192,13 +190,18 @@
 	return freq_hi;
 }
 
+static void ondemand_powersave_bias_init_cpu(int cpu)
+{
+	struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
+	dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+	dbs_info->freq_lo = 0;
+}
+
 static void ondemand_powersave_bias_init(void)
 {
 	int i;
 	for_each_online_cpu(i) {
-		struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
-		dbs_info->freq_table = cpufreq_frequency_get_table(i);
-		dbs_info->freq_lo = 0;
+		ondemand_powersave_bias_init_cpu(i);
 	}
 }
 
@@ -240,12 +243,10 @@
 	unsigned int input;
 	int ret;
 	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
+		return -EINVAL;
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1) {
-		mutex_unlock(&dbs_mutex);
-		return -EINVAL;
-	}
 	dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
 	mutex_unlock(&dbs_mutex);
 
@@ -259,13 +260,12 @@
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	mutex_lock(&dbs_mutex);
 	if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
-		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
 
+	mutex_lock(&dbs_mutex);
 	dbs_tuners_ins.up_threshold = input;
 	mutex_unlock(&dbs_mutex);
 
@@ -363,9 +363,6 @@
 	struct cpufreq_policy *policy;
 	unsigned int j;
 
-	if (!this_dbs_info->enable)
-		return;
-
 	this_dbs_info->freq_lo = 0;
 	policy = this_dbs_info->cur_policy;
 
@@ -493,14 +490,7 @@
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 
 	delay -= jiffies % delay;
-
-	if (lock_policy_rwsem_write(cpu) < 0)
-		return;
-
-	if (!dbs_info->enable) {
-		unlock_policy_rwsem_write(cpu);
-		return;
-	}
+	mutex_lock(&dbs_info->timer_mutex);
 
 	/* Common NORMAL_SAMPLE setup */
 	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
@@ -517,7 +507,7 @@
 			dbs_info->freq_lo, CPUFREQ_RELATION_H);
 	}
 	queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
-	unlock_policy_rwsem_write(cpu);
+	mutex_unlock(&dbs_info->timer_mutex);
 }
 
 static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -526,8 +516,6 @@
 	int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
 	delay -= jiffies % delay;
 
-	dbs_info->enable = 1;
-	ondemand_powersave_bias_init();
 	dbs_info->sample_type = DBS_NORMAL_SAMPLE;
 	INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
 	queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
@@ -536,7 +524,6 @@
 
 static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
 {
-	dbs_info->enable = 0;
 	cancel_delayed_work_sync(&dbs_info->work);
 }
 
@@ -555,19 +542,15 @@
 		if ((!cpu_online(cpu)) || (!policy->cur))
 			return -EINVAL;
 
-		if (this_dbs_info->enable) /* Already enabled */
-			break;
-
 		mutex_lock(&dbs_mutex);
-		dbs_enable++;
 
 		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
 		if (rc) {
-			dbs_enable--;
 			mutex_unlock(&dbs_mutex);
 			return rc;
 		}
 
+		dbs_enable++;
 		for_each_cpu(j, policy->cpus) {
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -581,6 +564,8 @@
 			}
 		}
 		this_dbs_info->cpu = cpu;
+		ondemand_powersave_bias_init_cpu(cpu);
+		mutex_init(&this_dbs_info->timer_mutex);
 		/*
 		 * Start the timerschedule work, when this governor
 		 * is used for first time
@@ -598,29 +583,31 @@
 				max(min_sampling_rate,
 				    latency * LATENCY_MULTIPLIER);
 		}
-		dbs_timer_init(this_dbs_info);
-
 		mutex_unlock(&dbs_mutex);
+
+		dbs_timer_init(this_dbs_info);
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
 		dbs_timer_exit(this_dbs_info);
+
+		mutex_lock(&dbs_mutex);
 		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+		mutex_destroy(&this_dbs_info->timer_mutex);
 		dbs_enable--;
 		mutex_unlock(&dbs_mutex);
 
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
+		mutex_lock(&this_dbs_info->timer_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->max, CPUFREQ_RELATION_H);
 		else if (policy->min > this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
+		mutex_unlock(&this_dbs_info->timer_mutex);
 		break;
 	}
 	return 0;
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 543fcca..f74edae 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -196,8 +196,8 @@
 {
 	int channel, bandwidth = 0;
 
-	fw_iso_resource_manage(card, generation, 1ULL << 31,
-			       &channel, &bandwidth, true);
+	fw_iso_resource_manage(card, generation, 1ULL << 31, &channel,
+			       &bandwidth, true, card->bm_transaction_data);
 	if (channel == 31) {
 		card->broadcast_channel_allocated = true;
 		device_for_each_child(card->device, (void *)(long)generation,
@@ -230,7 +230,6 @@
 	bool do_reset = false;
 	bool root_device_is_running;
 	bool root_device_is_cmc;
-	__be32 lock_data[2];
 
 	spin_lock_irqsave(&card->lock, flags);
 
@@ -273,22 +272,23 @@
 			goto pick_me;
 		}
 
-		lock_data[0] = cpu_to_be32(0x3f);
-		lock_data[1] = cpu_to_be32(local_id);
+		card->bm_transaction_data[0] = cpu_to_be32(0x3f);
+		card->bm_transaction_data[1] = cpu_to_be32(local_id);
 
 		spin_unlock_irqrestore(&card->lock, flags);
 
 		rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
 				irm_id, generation, SCODE_100,
 				CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
-				lock_data, sizeof(lock_data));
+				card->bm_transaction_data,
+				sizeof(card->bm_transaction_data));
 
 		if (rcode == RCODE_GENERATION)
 			/* Another bus reset, BM work has been rescheduled. */
 			goto out;
 
 		if (rcode == RCODE_COMPLETE &&
-		    lock_data[0] != cpu_to_be32(0x3f)) {
+		    card->bm_transaction_data[0] != cpu_to_be32(0x3f)) {
 
 			/* Somebody else is BM.  Only act as IRM. */
 			if (local_id == irm_id)
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index d1d30c6..ced186d 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -125,6 +125,7 @@
 	int generation;
 	u64 channels;
 	s32 bandwidth;
+	__be32 transaction_data[2];
 	struct iso_resource_event *e_alloc, *e_dealloc;
 };
 
@@ -1049,7 +1050,8 @@
 			r->channels, &channel, &bandwidth,
 			todo == ISO_RES_ALLOC ||
 			todo == ISO_RES_REALLOC ||
-			todo == ISO_RES_ALLOC_ONCE);
+			todo == ISO_RES_ALLOC_ONCE,
+			r->transaction_data);
 	/*
 	 * Is this generation outdated already?  As long as this resource sticks
 	 * in the idr, it will be scheduled again for a newer generation or at
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 166f19c..110e731 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -177,9 +177,8 @@
  */
 
 static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
-			    int bandwidth, bool allocate)
+			    int bandwidth, bool allocate, __be32 data[2])
 {
-	__be32 data[2];
 	int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0;
 
 	/*
@@ -215,9 +214,9 @@
 }
 
 static int manage_channel(struct fw_card *card, int irm_id, int generation,
-			  u32 channels_mask, u64 offset, bool allocate)
+		u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
 {
-	__be32 data[2], c, all, old;
+	__be32 c, all, old;
 	int i, retry = 5;
 
 	old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -260,7 +259,7 @@
 }
 
 static void deallocate_channel(struct fw_card *card, int irm_id,
-			       int generation, int channel)
+			       int generation, int channel, __be32 buffer[2])
 {
 	u32 mask;
 	u64 offset;
@@ -269,7 +268,7 @@
 	offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI :
 				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO;
 
-	manage_channel(card, irm_id, generation, mask, offset, false);
+	manage_channel(card, irm_id, generation, mask, offset, false, buffer);
 }
 
 /**
@@ -298,7 +297,7 @@
  */
 void fw_iso_resource_manage(struct fw_card *card, int generation,
 			    u64 channels_mask, int *channel, int *bandwidth,
-			    bool allocate)
+			    bool allocate, __be32 buffer[2])
 {
 	u32 channels_hi = channels_mask;	/* channels 31...0 */
 	u32 channels_lo = channels_mask >> 32;	/* channels 63...32 */
@@ -310,10 +309,12 @@
 
 	if (channels_hi)
 		c = manage_channel(card, irm_id, generation, channels_hi,
-		    CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate);
+				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI,
+				allocate, buffer);
 	if (channels_lo && c < 0) {
 		c = manage_channel(card, irm_id, generation, channels_lo,
-		    CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate);
+				CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO,
+				allocate, buffer);
 		if (c >= 0)
 			c += 32;
 	}
@@ -325,12 +326,13 @@
 	if (*bandwidth == 0)
 		return;
 
-	ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate);
+	ret = manage_bandwidth(card, irm_id, generation, *bandwidth,
+			       allocate, buffer);
 	if (ret < 0)
 		*bandwidth = 0;
 
 	if (allocate && ret < 0 && c >= 0) {
-		deallocate_channel(card, irm_id, generation, c);
+		deallocate_channel(card, irm_id, generation, c, buffer);
 		*channel = ret;
 	}
 }
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index c3cfc64..6052816 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -120,7 +120,8 @@
 
 int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
 void fw_iso_resource_manage(struct fw_card *card, int generation,
-		u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+			    u64 channels_mask, int *channel, int *bandwidth,
+			    bool allocate, __be32 buffer[2]);
 
 
 /* -topology */
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 24c4563..8d51568 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -201,6 +201,12 @@
 #define SBP2_CYCLE_LIMIT		(0xc8 << 12)	/* 200 125us cycles */
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * The default maximum s/g segment size of a FireWire controller is
  * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
  * be quadlet-aligned, we set the length limit to 0xffff & ~3.
@@ -312,7 +318,7 @@
 		struct sbp2_pointer next;
 		struct sbp2_pointer data_descriptor;
 		__be32 misc;
-		u8 command_block[12];
+		u8 command_block[SBP2_MAX_CDB_SIZE];
 	} request;
 	struct scsi_cmnd *cmd;
 	scsi_done_fn_t done;
@@ -1146,6 +1152,8 @@
 	if (fw_device_enable_phys_dma(device) < 0)
 		goto fail_shost_put;
 
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
+
 	if (scsi_add_host(shost, &unit->device) < 0)
 		goto fail_shost_put;
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3582c39..96dda81 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -79,6 +79,12 @@
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
+config GPIO_VR41XX
+	tristate "NEC VR4100 series General-purpose I/O Uint support"
+	depends on CPU_VR41XX
+	help
+	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ef90203..9244c6f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -13,3 +13,4 @@
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
+obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c
new file mode 100644
index 0000000..b70e061
--- /dev/null
+++ b/drivers/gpio/vr41xx_giu.c
@@ -0,0 +1,586 @@
+/*
+ *  Driver for NEC VR4100 series General-purpose I/O Unit.
+ *
+ *  Copyright (C) 2002 MontaVista Software Inc.
+ *	Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
+#include <asm/vr41xx/vr41xx.h>
+
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
+MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
+MODULE_LICENSE("GPL");
+
+#define GIUIOSELL	0x00
+#define GIUIOSELH	0x02
+#define GIUPIODL	0x04
+#define GIUPIODH	0x06
+#define GIUINTSTATL	0x08
+#define GIUINTSTATH	0x0a
+#define GIUINTENL	0x0c
+#define GIUINTENH	0x0e
+#define GIUINTTYPL	0x10
+#define GIUINTTYPH	0x12
+#define GIUINTALSELL	0x14
+#define GIUINTALSELH	0x16
+#define GIUINTHTSELL	0x18
+#define GIUINTHTSELH	0x1a
+#define GIUPODATL	0x1c
+#define GIUPODATEN	0x1c
+#define GIUPODATH	0x1e
+ #define PIOEN0		0x0100
+ #define PIOEN1		0x0200
+#define GIUPODAT	0x1e
+#define GIUFEDGEINHL	0x20
+#define GIUFEDGEINHH	0x22
+#define GIUREDGEINHL	0x24
+#define GIUREDGEINHH	0x26
+
+#define GIUUSEUPDN	0x1e0
+#define GIUTERMUPDN	0x1e2
+
+#define GPIO_HAS_PULLUPDOWN_IO		0x0001
+#define GPIO_HAS_OUTPUT_ENABLE		0x0002
+#define GPIO_HAS_INTERRUPT_EDGE_SELECT	0x0100
+
+enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+};
+
+static DEFINE_SPINLOCK(giu_lock);
+static unsigned long giu_flags;
+
+static void __iomem *giu_base;
+
+#define giu_read(offset)		readw(giu_base + (offset))
+#define giu_write(offset, value)	writew((value), giu_base + (offset))
+
+#define GPIO_PIN_OF_IRQ(irq)	((irq) - GIU_IRQ_BASE)
+#define GIUINT_HIGH_OFFSET	16
+#define GIUINT_HIGH_MAX		32
+
+static inline u16 giu_set(u16 offset, u16 set)
+{
+	u16 data;
+
+	data = giu_read(offset);
+	data |= set;
+	giu_write(offset, data);
+
+	return data;
+}
+
+static inline u16 giu_clear(u16 offset, u16 clear)
+{
+	u16 data;
+
+	data = giu_read(offset);
+	data &= ~clear;
+	giu_write(offset, data);
+
+	return data;
+}
+
+static void ack_giuint_low(unsigned int irq)
+{
+	giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static void mask_giuint_low(unsigned int irq)
+{
+	giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static void mask_ack_giuint_low(unsigned int irq)
+{
+	unsigned int pin;
+
+	pin = GPIO_PIN_OF_IRQ(irq);
+	giu_clear(GIUINTENL, 1 << pin);
+	giu_write(GIUINTSTATL, 1 << pin);
+}
+
+static void unmask_giuint_low(unsigned int irq)
+{
+	giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq));
+}
+
+static struct irq_chip giuint_low_irq_chip = {
+	.name		= "GIUINTL",
+	.ack		= ack_giuint_low,
+	.mask		= mask_giuint_low,
+	.mask_ack	= mask_ack_giuint_low,
+	.unmask		= unmask_giuint_low,
+};
+
+static void ack_giuint_high(unsigned int irq)
+{
+	giu_write(GIUINTSTATH,
+		  1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_giuint_high(unsigned int irq)
+{
+	giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static void mask_ack_giuint_high(unsigned int irq)
+{
+	unsigned int pin;
+
+	pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET;
+	giu_clear(GIUINTENH, 1 << pin);
+	giu_write(GIUINTSTATH, 1 << pin);
+}
+
+static void unmask_giuint_high(unsigned int irq)
+{
+	giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+}
+
+static struct irq_chip giuint_high_irq_chip = {
+	.name		= "GIUINTH",
+	.ack		= ack_giuint_high,
+	.mask		= mask_giuint_high,
+	.mask_ack	= mask_ack_giuint_high,
+	.unmask		= unmask_giuint_high,
+};
+
+static int giu_get_irq(unsigned int irq)
+{
+	u16 pendl, pendh, maskl, maskh;
+	int i;
+
+	pendl = giu_read(GIUINTSTATL);
+	pendh = giu_read(GIUINTSTATH);
+	maskl = giu_read(GIUINTENL);
+	maskh = giu_read(GIUINTENH);
+
+	maskl &= pendl;
+	maskh &= pendh;
+
+	if (maskl) {
+		for (i = 0; i < 16; i++) {
+			if (maskl & (1 << i))
+				return GIU_IRQ(i);
+		}
+	} else if (maskh) {
+		for (i = 0; i < 16; i++) {
+			if (maskh & (1 << i))
+				return GIU_IRQ(i + GIUINT_HIGH_OFFSET);
+		}
+	}
+
+	printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n",
+	       maskl, pendl, maskh, pendh);
+
+	atomic_inc(&irq_err_count);
+
+	return -EINVAL;
+}
+
+void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+			    irq_signal_t signal)
+{
+	u16 mask;
+
+	if (pin < GIUINT_HIGH_OFFSET) {
+		mask = 1 << pin;
+		if (trigger != IRQ_TRIGGER_LEVEL) {
+			giu_set(GIUINTTYPL, mask);
+			if (signal == IRQ_SIGNAL_HOLD)
+				giu_set(GIUINTHTSELL, mask);
+			else
+				giu_clear(GIUINTHTSELL, mask);
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+				switch (trigger) {
+				case IRQ_TRIGGER_EDGE_FALLING:
+					giu_set(GIUFEDGEINHL, mask);
+					giu_clear(GIUREDGEINHL, mask);
+					break;
+				case IRQ_TRIGGER_EDGE_RISING:
+					giu_clear(GIUFEDGEINHL, mask);
+					giu_set(GIUREDGEINHL, mask);
+					break;
+				default:
+					giu_set(GIUFEDGEINHL, mask);
+					giu_set(GIUREDGEINHL, mask);
+					break;
+				}
+			}
+			set_irq_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_low_irq_chip,
+						 handle_edge_irq);
+		} else {
+			giu_clear(GIUINTTYPL, mask);
+			giu_clear(GIUINTHTSELL, mask);
+			set_irq_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_low_irq_chip,
+						 handle_level_irq);
+		}
+		giu_write(GIUINTSTATL, mask);
+	} else if (pin < GIUINT_HIGH_MAX) {
+		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+		if (trigger != IRQ_TRIGGER_LEVEL) {
+			giu_set(GIUINTTYPH, mask);
+			if (signal == IRQ_SIGNAL_HOLD)
+				giu_set(GIUINTHTSELH, mask);
+			else
+				giu_clear(GIUINTHTSELH, mask);
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
+				switch (trigger) {
+				case IRQ_TRIGGER_EDGE_FALLING:
+					giu_set(GIUFEDGEINHH, mask);
+					giu_clear(GIUREDGEINHH, mask);
+					break;
+				case IRQ_TRIGGER_EDGE_RISING:
+					giu_clear(GIUFEDGEINHH, mask);
+					giu_set(GIUREDGEINHH, mask);
+					break;
+				default:
+					giu_set(GIUFEDGEINHH, mask);
+					giu_set(GIUREDGEINHH, mask);
+					break;
+				}
+			}
+			set_irq_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_high_irq_chip,
+						 handle_edge_irq);
+		} else {
+			giu_clear(GIUINTTYPH, mask);
+			giu_clear(GIUINTHTSELH, mask);
+			set_irq_chip_and_handler(GIU_IRQ(pin),
+						 &giuint_high_irq_chip,
+						 handle_level_irq);
+		}
+		giu_write(GIUINTSTATH, mask);
+	}
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
+
+void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
+{
+	u16 mask;
+
+	if (pin < GIUINT_HIGH_OFFSET) {
+		mask = 1 << pin;
+		if (level == IRQ_LEVEL_HIGH)
+			giu_set(GIUINTALSELL, mask);
+		else
+			giu_clear(GIUINTALSELL, mask);
+		giu_write(GIUINTSTATL, mask);
+	} else if (pin < GIUINT_HIGH_MAX) {
+		mask = 1 << (pin - GIUINT_HIGH_OFFSET);
+		if (level == IRQ_LEVEL_HIGH)
+			giu_set(GIUINTALSELH, mask);
+		else
+			giu_clear(GIUINTALSELH, mask);
+		giu_write(GIUINTSTATH, mask);
+	}
+}
+EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
+
+static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir)
+{
+	u16 offset, mask, reg;
+	unsigned long flags;
+
+	if (pin >= chip->ngpio)
+		return -EINVAL;
+
+	if (pin < 16) {
+		offset = GIUIOSELL;
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		offset = GIUIOSELH;
+		mask = 1 << (pin - 16);
+	} else {
+		if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
+			offset = GIUPODATEN;
+			mask = 1 << (pin - 32);
+		} else {
+			switch (pin) {
+			case 48:
+				offset = GIUPODATH;
+				mask = PIOEN0;
+				break;
+			case 49:
+				offset = GIUPODATH;
+				mask = PIOEN1;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&giu_lock, flags);
+
+	reg = giu_read(offset);
+	if (dir == GPIO_OUTPUT)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	giu_write(offset, reg);
+
+	spin_unlock_irqrestore(&giu_lock, flags);
+
+	return 0;
+}
+
+int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
+{
+	u16 reg, mask;
+	unsigned long flags;
+
+	if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
+		return -EPERM;
+
+	if (pin >= 15)
+		return -EINVAL;
+
+	mask = 1 << pin;
+
+	spin_lock_irqsave(&giu_lock, flags);
+
+	if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) {
+		reg = giu_read(GIUTERMUPDN);
+		if (pull == GPIO_PULL_UP)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		giu_write(GIUTERMUPDN, reg);
+
+		reg = giu_read(GIUUSEUPDN);
+		reg |= mask;
+		giu_write(GIUUSEUPDN, reg);
+	} else {
+		reg = giu_read(GIUUSEUPDN);
+		reg &= ~mask;
+		giu_write(GIUUSEUPDN, reg);
+	}
+
+	spin_unlock_irqrestore(&giu_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
+
+static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+	u16 reg, mask;
+
+	if (pin >= chip->ngpio)
+		return -EINVAL;
+
+	if (pin < 16) {
+		reg = giu_read(GIUPIODL);
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		reg = giu_read(GIUPIODH);
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		reg = giu_read(GIUPODATL);
+		mask = 1 << (pin - 32);
+	} else {
+		reg = giu_read(GIUPODATH);
+		mask = 1 << (pin - 48);
+	}
+
+	if (reg & mask)
+		return 1;
+
+	return 0;
+}
+
+static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin,
+			    int value)
+{
+	u16 offset, mask, reg;
+	unsigned long flags;
+
+	if (pin >= chip->ngpio)
+		return;
+
+	if (pin < 16) {
+		offset = GIUPIODL;
+		mask = 1 << pin;
+	} else if (pin < 32) {
+		offset = GIUPIODH;
+		mask = 1 << (pin - 16);
+	} else if (pin < 48) {
+		offset = GIUPODATL;
+		mask = 1 << (pin - 32);
+	} else {
+		offset = GIUPODATH;
+		mask = 1 << (pin - 48);
+	}
+
+	spin_lock_irqsave(&giu_lock, flags);
+
+	reg = giu_read(offset);
+	if (value)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	giu_write(offset, reg);
+
+	spin_unlock_irqrestore(&giu_lock, flags);
+}
+
+
+static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return giu_set_direction(chip, offset, GPIO_INPUT);
+}
+
+static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				int value)
+{
+	vr41xx_gpio_set(chip, offset, value);
+
+	return giu_set_direction(chip, offset, GPIO_OUTPUT);
+}
+
+static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset >= chip->ngpio)
+		return -EINVAL;
+
+	return GIU_IRQ_BASE + offset;
+}
+
+static struct gpio_chip vr41xx_gpio_chip = {
+	.label			= "vr41xx",
+	.owner			= THIS_MODULE,
+	.direction_input	= vr41xx_gpio_direction_input,
+	.get			= vr41xx_gpio_get,
+	.direction_output	= vr41xx_gpio_direction_output,
+	.set			= vr41xx_gpio_set,
+	.to_irq			= vr41xx_gpio_to_irq,
+};
+
+static int __devinit giu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	unsigned int trigger, i, pin;
+	struct irq_chip *chip;
+	int irq, retval;
+
+	switch (pdev->id) {
+	case GPIO_50PINS_PULLUPDOWN:
+		giu_flags = GPIO_HAS_PULLUPDOWN_IO;
+		vr41xx_gpio_chip.ngpio = 50;
+		break;
+	case GPIO_36PINS:
+		vr41xx_gpio_chip.ngpio = 36;
+		break;
+	case GPIO_48PINS_EDGE_SELECT:
+		giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
+		vr41xx_gpio_chip.ngpio = 48;
+		break;
+	default:
+		dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id);
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EBUSY;
+
+	giu_base = ioremap(res->start, res->end - res->start + 1);
+	if (!giu_base)
+		return -ENOMEM;
+
+	vr41xx_gpio_chip.dev = &pdev->dev;
+
+	retval = gpiochip_add(&vr41xx_gpio_chip);
+
+	giu_write(GIUINTENL, 0);
+	giu_write(GIUINTENH, 0);
+
+	trigger = giu_read(GIUINTTYPH) << 16;
+	trigger |= giu_read(GIUINTTYPL);
+	for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) {
+		pin = GPIO_PIN_OF_IRQ(i);
+		if (pin < GIUINT_HIGH_OFFSET)
+			chip = &giuint_low_irq_chip;
+		else
+			chip = &giuint_high_irq_chip;
+
+		if (trigger & (1 << pin))
+			set_irq_chip_and_handler(i, chip, handle_edge_irq);
+		else
+			set_irq_chip_and_handler(i, chip, handle_level_irq);
+
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0 || irq >= nr_irqs)
+		return -EBUSY;
+
+	return cascade_irq(irq, giu_get_irq);
+}
+
+static int __devexit giu_remove(struct platform_device *pdev)
+{
+	if (giu_base) {
+		iounmap(giu_base);
+		giu_base = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver giu_device_driver = {
+	.probe		= giu_probe,
+	.remove		= __devexit_p(giu_remove),
+	.driver		= {
+		.name	= "GIU",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init vr41xx_giu_init(void)
+{
+	return platform_driver_register(&giu_device_driver);
+}
+
+static void __exit vr41xx_giu_exit(void)
+{
+	platform_driver_unregister(&giu_device_driver);
+}
+
+module_init(vr41xx_giu_init);
+module_exit(vr41xx_giu_exit);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e447674..b1bc6e2 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -85,10 +85,11 @@
 {
 	volatile struct iic_regs __iomem *iic = dev->vaddr;
 	printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
-	printk(KERN_DEBUG "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
-	       KERN_DEBUG "  sts      = 0x%02x, extsts = 0x%02x\n"
-	       KERN_DEBUG "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
-	       KERN_DEBUG "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+	printk(KERN_DEBUG
+	       "  cntl     = 0x%02x, mdcntl = 0x%02x\n"
+	       "  sts      = 0x%02x, extsts = 0x%02x\n"
+	       "  clkdiv   = 0x%02x, xfrcnt = 0x%02x\n"
+	       "  xtcntlss = 0x%02x, directcntl = 0x%02x\n",
 		in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
 		in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
 		in_8(&iic->xtcntlss), in_8(&iic->directcntl));
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index d5f3c77..db96138 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -466,14 +466,10 @@
 
 	if (!ide_lock_port(hwif)) {
 		ide_hwif_t *prev_port;
+
+		WARN_ON_ONCE(hwif->rq);
 repeat:
 		prev_port = hwif->host->cur_port;
-
-		if (drive->dev_flags & IDE_DFLAG_BLOCKED)
-			rq = hwif->rq;
-		else
-			WARN_ON_ONCE(hwif->rq);
-
 		if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
 		    time_after(drive->sleep, jiffies)) {
 			ide_unlock_port(hwif);
@@ -500,29 +496,43 @@
 		hwif->cur_dev = drive;
 		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
 
-		if (rq == NULL) {
-			spin_unlock_irq(&hwif->lock);
-			spin_lock_irq(q->queue_lock);
-			/*
-			 * we know that the queue isn't empty, but this can
-			 * happen if ->prep_rq_fn() decides to kill a request
-			 */
+		spin_unlock_irq(&hwif->lock);
+		spin_lock_irq(q->queue_lock);
+		/*
+		 * we know that the queue isn't empty, but this can happen
+		 * if the q->prep_rq_fn() decides to kill a request
+		 */
+		if (!rq)
 			rq = blk_fetch_request(drive->queue);
-			spin_unlock_irq(q->queue_lock);
-			spin_lock_irq(&hwif->lock);
 
-			if (rq == NULL) {
-				ide_unlock_port(hwif);
-				goto out;
-			}
+		spin_unlock_irq(q->queue_lock);
+		spin_lock_irq(&hwif->lock);
+
+		if (!rq) {
+			ide_unlock_port(hwif);
+			goto out;
 		}
 
 		/*
 		 * Sanity: don't accept a request that isn't a PM request
-		 * if we are currently power managed.
+		 * if we are currently power managed. This is very important as
+		 * blk_stop_queue() doesn't prevent the blk_fetch_request()
+		 * above to return us whatever is in the queue. Since we call
+		 * ide_do_request() ourselves, we end up taking requests while
+		 * the queue is blocked...
+		 * 
+		 * We let requests forced at head of queue with ide-preempt
+		 * though. I hope that doesn't happen too much, hopefully not
+		 * unless the subdriver triggers such a thing in its own PM
+		 * state machine.
 		 */
-		BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
-		       blk_pm_request(rq) == 0);
+		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+		    blk_pm_request(rq) == 0 &&
+		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
+			/* there should be no pending command at this point */
+			ide_unlock_port(hwif);
+			goto plug_device;
+		}
 
 		hwif->rq = rq;
 
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 83b734a..52b25f8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -880,6 +880,7 @@
 	}
 
 	shost->hostdata[0] = (unsigned long)lu;
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
 
 	if (!scsi_add_host(shost, &ud->device)) {
 		lu->shost = shost;
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index c5036f1..64a3a66 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,6 +25,12 @@
 #define SBP2_DEVICE_NAME		"sbp2"
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * SBP-2 specific definitions
  */
 
@@ -51,7 +57,7 @@
 	u32 data_descriptor_hi;
 	u32 data_descriptor_lo;
 	u32 misc;
-	u8 cdb[12];
+	u8 cdb[SBP2_MAX_CDB_SIZE];
 } __attribute__((packed));
 
 #define SBP2_LOGIN_REQUEST		0x0
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796..a6b989a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@
 
 if INPUT_KEYBOARD
 
+config KEYBOARD_AAED2000
+	tristate "AAED-2000 keyboard"
+	depends on MACH_AAED2000
+	select INPUT_POLLDEV
+	default y
+	help
+	  Say Y here to enable the keyboard on the Agilent AAED-2000
+	  development board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+	tristate "Amiga keyboard"
+	depends on AMIGA
+	help
+	  Say Y here if you are running Linux on any AMIGA and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amikbd.
+
+config ATARI_KBD_CORE
+	bool
+
+config KEYBOARD_ATARI
+	tristate "Atari keyboard"
+	depends on ATARI
+	select ATARI_KBD_CORE
+	help
+	  Say Y here if you are running Linux on any Atari and have a keyboard
+	  attached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atakbd.
+
 config KEYBOARD_ATKBD
 	tristate "AT keyboard" if EMBEDDED || !X86
 	default y
@@ -68,16 +104,25 @@
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
-config KEYBOARD_SUNKBD
-	tristate "Sun Type 4 and Type 5 keyboard"
-	select SERIO
+config KEYBOARD_BFIN
+	tristate "Blackfin BF54x keypad support"
+	depends on (BF54x && !BF544)
 	help
-	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
-	  connected either to the Sun keyboard connector or to an serial
-	  (RS-232) port via a simple adapter.
+	  Say Y here if you want to use the BF54x keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sunkbd.
+	  module will be called bf54x-keys.
+
+config KEYBOARD_CORGI
+	tristate "Corgi keyboard"
+	depends on PXA_SHARPSL
+	default y
+	help
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+	  series of PDAs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called corgikbd.
 
 config KEYBOARD_LKKBD
 	tristate "DECstation/VAXstation LK201/LK401 keyboard"
@@ -91,113 +136,38 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called lkkbd.
 
-config KEYBOARD_LOCOMO
-	tristate "LoCoMo Keyboard Support"
-	depends on SHARP_LOCOMO && INPUT_KEYBOARD
+config KEYBOARD_EP93XX
+	tristate "EP93xx Matrix Keypad support"
+	depends on ARCH_EP93XX
 	help
-	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called locomokbd.
+	  module will be called ep93xx_keypad.
 
-config KEYBOARD_XTKBD
-	tristate "XT keyboard"
-	select SERIO
+config KEYBOARD_GPIO
+	tristate "GPIO Buttons"
+	depends on GENERIC_GPIO
 	help
-	  Say Y here if you want to use the old IBM PC/XT keyboard (or
-	  compatible) on your system. This is only possible with a
-	  parallel port keyboard adapter, you cannot connect it to the
-	  keyboard port on a PC that runs Linux.
+	  This driver implements support for buttons connected
+	  to GPIO pins of various CPUs (and some other chips).
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called xtkbd.
+	  module will be called gpio_keys.
 
-config KEYBOARD_NEWTON
-	tristate "Newton keyboard"
-	select SERIO
+config KEYBOARD_MATRIX
+	tristate "GPIO driven matrix keypad support"
+	depends on GENERIC_GPIO
 	help
-	  Say Y here if you have a Newton keyboard on a serial port.
+	  Enable support for GPIO driven matrix keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
-	tristate "Stowaway keyboard"
-	select SERIO
-	help
-	  Say Y here if you have a Stowaway keyboard on a serial port.
-	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
-	  are also supported by this driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called stowaway.
-
-config KEYBOARD_CORGI
-	tristate "Corgi keyboard"
-	depends on PXA_SHARPSL
-	default y
-	help
-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
-	  series of PDAs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called corgikbd.
-
-config KEYBOARD_SPITZ
-	tristate "Spitz keyboard"
-	depends on PXA_SHARPSL
-	default y
-	help
-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
-	  SL-C3000 and Sl-C3100 series of PDAs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called spitzkbd.
-
-config KEYBOARD_TOSA
-	tristate "Tosa keyboard"
-	depends on MACH_TOSA
-	default y
-	help
-	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on KEYBOARD_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config KEYBOARD_AMIGA
-	tristate "Amiga keyboard"
-	depends on AMIGA
-	help
-	  Say Y here if you are running Linux on any AMIGA and have a keyboard
-	  attached.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called amikbd.
-
-config ATARI_KBD_CORE
-	bool
-
-config KEYBOARD_ATARI
-	tristate "Atari keyboard"
-	depends on ATARI
-	select ATARI_KBD_CORE
-	help
-	  Say Y here if you are running Linux on any Atari and have a keyboard
-	  attached.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called atakbd.
+	  module will be called matrix_keypad.
 
 config KEYBOARD_HIL_OLD
 	tristate "HP HIL keyboard support (simple driver)"
@@ -261,20 +231,39 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called lm8323.
 
-config KEYBOARD_OMAP
-	tristate "TI OMAP keypad support"
-	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+	tristate "LoCoMo Keyboard Support"
+	depends on SHARP_LOCOMO
 	help
-	  Say Y here if you want to use the OMAP keypad.
+	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called omap-keypad.
+	  module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+	tristate "Maple bus keyboard"
+	depends on SH_DREAMCAST && MAPLE
+	help
+	  Say Y here if you have a Dreamcast console running Linux and have
+	  a keyboard attached to its Maple bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+	tristate "Newton keyboard"
+	select SERIO
+	help
+	  Say Y here if you have a Newton keyboard on a serial port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called newtonkbd.
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx
 	help
-	  Enable support for PXA27x/PXA3xx keypad controller
+	  Enable support for PXA27x/PXA3xx keypad controller.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa27x_keypad.
@@ -288,51 +277,38 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
-config KEYBOARD_AAED2000
-	tristate "AAED-2000 keyboard"
-	depends on MACH_AAED2000
-	select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+	tristate "Spitz keyboard"
+	depends on PXA_SHARPSL
 	default y
 	help
-	  Say Y here to enable the keyboard on the Agilent AAED-2000
-	  development board.
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+	  SL-C3000 and Sl-C3100 series of PDAs.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called aaed2000_kbd.
+	  module will be called spitzkbd.
 
-config KEYBOARD_GPIO
-	tristate "GPIO Buttons"
-	depends on GENERIC_GPIO
+config KEYBOARD_STOWAWAY
+	tristate "Stowaway keyboard"
+	select SERIO
 	help
-	  This driver implements support for buttons connected
-	  to GPIO pins of various CPUs (and some other chips).
-
-	  Say Y here if your device has buttons connected
-	  directly to such GPIO pins.  Your board-specific
-	  setup logic must also provide a platform device,
-	  with configuration data saying which GPIOs are used.
+	  Say Y here if you have a Stowaway keyboard on a serial port.
+	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
+	  are also supported by this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called gpio-keys.
+	  module will be called stowaway.
 
-config KEYBOARD_MAPLE
-	tristate "Maple bus keyboard"
-	depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_SUNKBD
+	tristate "Sun Type 4 and Type 5 keyboard"
+	select SERIO
 	help
-	  Say Y here if you have a Dreamcast console running Linux and have
-	  a keyboard attached to its Maple bus.
+	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+	  connected either to the Sun keyboard connector or to an serial
+	  (RS-232) port via a simple adapter.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called maple_keyb.
-
-config KEYBOARD_BFIN
-	tristate "Blackfin BF54x keypad support"
-	depends on (BF54x && !BF544)
-	help
-	  Say Y here if you want to use the BF54x keypad.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf54x-keys.
+	  module will be called sunkbd.
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
@@ -344,13 +320,45 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
 
-config KEYBOARD_EP93XX
-	tristate "EP93xx Matrix Keypad support"
-	depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+	tristate "TI OMAP keypad support"
+	depends on (ARCH_OMAP1 || ARCH_OMAP2)
 	help
-	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+	  Say Y here if you want to use the OMAP keypad.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ep93xx_keypad.
+	  module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+	tristate "Tosa keyboard"
+	depends on MACH_TOSA
+	default y
+	help
+	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on KEYBOARD_TOSA
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+	tristate "XT keyboard"
+	select SERIO
+	help
+	  Say Y here if you want to use the old IBM PC/XT keyboard (or
+	  compatible) on your system. This is only possible with a
+	  parallel port keyboard adapter, you cannot connect it to the
+	  keyboard port on a PC that runs Linux.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xtkbd.
 
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 156b647..b5b5eae 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -4,29 +4,30 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
-obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
-obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
-obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
+obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
-obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
-obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
-obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
-obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
-obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
+obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
-obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
-obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
-obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
-obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
-obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
-obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
-obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TOSA)		+= tosakbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2157cd7..efed0c9 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,7 +29,8 @@
 struct gpio_button_data {
 	struct gpio_keys_button *button;
 	struct input_dev *input;
-	struct delayed_work work;
+	struct timer_list timer;
+	struct work_struct work;
 };
 
 struct gpio_keys_drvdata {
@@ -40,7 +41,7 @@
 static void gpio_keys_report_event(struct work_struct *work)
 {
 	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work.work);
+		container_of(work, struct gpio_button_data, work);
 	struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
@@ -50,17 +51,25 @@
 	input_sync(input);
 }
 
+static void gpio_keys_timer(unsigned long _data)
+{
+	struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+	schedule_work(&data->work);
+}
+
 static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 {
 	struct gpio_button_data *bdata = dev_id;
 	struct gpio_keys_button *button = bdata->button;
-	unsigned long delay;
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	delay = button->debounce_interval ?
-			msecs_to_jiffies(button->debounce_interval) : 0;
-	schedule_delayed_work(&bdata->work, delay);
+	if (button->debounce_interval)
+		mod_timer(&bdata->timer,
+			jiffies + msecs_to_jiffies(button->debounce_interval));
+	else
+		schedule_work(&bdata->work);
 
 	return IRQ_HANDLED;
 }
@@ -107,7 +116,9 @@
 
 		bdata->input = input;
 		bdata->button = button;
-		INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
+		setup_timer(&bdata->timer,
+			    gpio_keys_timer, (unsigned long)bdata);
+		INIT_WORK(&bdata->work, gpio_keys_report_event);
 
 		error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
 		if (error < 0) {
@@ -166,7 +177,9 @@
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		cancel_delayed_work_sync(&ddata->data[i].work);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
+		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
@@ -190,7 +203,9 @@
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		cancel_delayed_work_sync(&ddata->data[i].work);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
+		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 0000000..e9b2e7cb
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,453 @@
+/*
+ *  GPIO driven matrix keyboard driver
+ *
+ *  Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on corgikbd.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+
+struct matrix_keypad {
+	const struct matrix_keypad_platform_data *pdata;
+	struct input_dev *input_dev;
+	unsigned short *keycodes;
+
+	uint32_t last_key_state[MATRIX_MAX_COLS];
+	struct delayed_work work;
+	bool scan_pending;
+	bool stopped;
+	spinlock_t lock;
+};
+
+/*
+ * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
+ * minmal side effect when scanning other columns, here it is configured to
+ * be input, and it should work on most platforms.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+			   int col, bool on)
+{
+	bool level_on = !pdata->active_low;
+
+	if (on) {
+		gpio_direction_output(pdata->col_gpios[col], level_on);
+	} else {
+		gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+		gpio_direction_input(pdata->col_gpios[col]);
+	}
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+			 int col, bool on)
+{
+	__activate_col(pdata, col, on);
+
+	if (on && pdata->col_scan_delay_us)
+		udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+			      bool on)
+{
+	int col;
+
+	for (col = 0; col < pdata->num_col_gpios; col++)
+		__activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+			 int row)
+{
+	return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+			!pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+	struct matrix_keypad *keypad =
+		container_of(work, struct matrix_keypad, work.work);
+	struct input_dev *input_dev = keypad->input_dev;
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	uint32_t new_state[MATRIX_MAX_COLS];
+	int row, col, code;
+
+	/* de-activate all columns for scanning */
+	activate_all_cols(pdata, false);
+
+	memset(new_state, 0, sizeof(new_state));
+
+	/* assert each column and read the row status out */
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+
+		activate_col(pdata, col, true);
+
+		for (row = 0; row < pdata->num_row_gpios; row++)
+			new_state[col] |=
+				row_asserted(pdata, row) ? (1 << row) : 0;
+
+		activate_col(pdata, col, false);
+	}
+
+	for (col = 0; col < pdata->num_col_gpios; col++) {
+		uint32_t bits_changed;
+
+		bits_changed = keypad->last_key_state[col] ^ new_state[col];
+		if (bits_changed == 0)
+			continue;
+
+		for (row = 0; row < pdata->num_row_gpios; row++) {
+			if ((bits_changed & (1 << row)) == 0)
+				continue;
+
+			code = (row << 4) + col;
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev,
+					 keypad->keycodes[code],
+					 new_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+
+	memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+	activate_all_cols(pdata, true);
+
+	/* Enable IRQs again */
+	spin_lock_irq(&keypad->lock);
+	keypad->scan_pending = false;
+	enable_row_irqs(keypad);
+	spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+	struct matrix_keypad *keypad = id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&keypad->lock, flags);
+
+	/*
+	 * See if another IRQ beaten us to it and scheduled the
+	 * scan already. In that case we should not try to
+	 * disable IRQs again.
+	 */
+	if (unlikely(keypad->scan_pending || keypad->stopped))
+		goto out;
+
+	disable_row_irqs(keypad);
+	keypad->scan_pending = true;
+	schedule_delayed_work(&keypad->work,
+		msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+	spin_unlock_irqrestore(&keypad->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	keypad->stopped = false;
+	mb();
+
+	/*
+	 * Schedule an immediate key scan to capture current key state;
+	 * columns will be activated and IRQs be enabled after the scan.
+	 */
+	schedule_delayed_work(&keypad->work, 0);
+
+	return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+	struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+	keypad->stopped = true;
+	mb();
+	flush_work(&keypad->work.work);
+	/*
+	 * matrix_keypad_scan() will leave IRQs enabled;
+	 * we should disable them now.
+	 */
+	disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM
+static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct platform_device *pdev)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (device_may_wakeup(&pdev->dev))
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+	matrix_keypad_start(keypad->input_dev);
+
+	return 0;
+}
+#else
+#define matrix_keypad_suspend	NULL
+#define matrix_keypad_resume	NULL
+#endif
+
+static int __devinit init_matrix_gpio(struct platform_device *pdev,
+					struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i, err = -EINVAL;
+
+	/* initialized strobe lines as outputs, activated */
+	for (i = 0; i < pdata->num_col_gpios; i++) {
+		err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for COL%d\n",
+				pdata->col_gpios[i], i);
+			goto err_free_cols;
+		}
+
+		gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to request GPIO%d for ROW%d\n",
+				pdata->row_gpios[i], i);
+			goto err_free_rows;
+		}
+
+		gpio_direction_input(pdata->row_gpios[i]);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+				matrix_keypad_interrupt,
+				IRQF_DISABLED |
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"matrix-keypad", keypad);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Unable to acquire interrupt for GPIO line %i\n",
+				pdata->row_gpios[i]);
+			goto err_free_irqs;
+		}
+	}
+
+	/* initialized as disabled - enabled by input->open */
+	disable_row_irqs(keypad);
+	return 0;
+
+err_free_irqs:
+	while (--i >= 0)
+		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	i = pdata->num_row_gpios;
+err_free_rows:
+	while (--i >= 0)
+		gpio_free(pdata->row_gpios[i]);
+	i = pdata->num_col_gpios;
+err_free_cols:
+	while (--i >= 0)
+		gpio_free(pdata->col_gpios[i]);
+
+	return err;
+}
+
+static int __devinit matrix_keypad_probe(struct platform_device *pdev)
+{
+	const struct matrix_keypad_platform_data *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct matrix_keypad *keypad;
+	struct input_dev *input_dev;
+	unsigned short *keycodes;
+	int i;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	if (!keymap_data->max_keymap_size) {
+		dev_err(&pdev->dev, "invalid keymap data supplied\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+	keycodes = kzalloc(keymap_data->max_keymap_size *
+				sizeof(keypad->keycodes),
+			   GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !keycodes || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->pdata = pdata;
+	keypad->keycodes = keycodes;
+	keypad->stopped = true;
+	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+	spin_lock_init(&keypad->lock);
+
+	input_dev->name		= pdev->name;
+	input_dev->id.bustype	= BUS_HOST;
+	input_dev->dev.parent	= &pdev->dev;
+	input_dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->open		= matrix_keypad_start;
+	input_dev->close	= matrix_keypad_stop;
+
+	input_dev->keycode	= keycodes;
+	input_dev->keycodesize	= sizeof(*keycodes);
+	input_dev->keycodemax	= keymap_data->max_keymap_size;
+
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		unsigned int key = keymap_data->keymap[i];
+		unsigned int row = KEY_ROW(key);
+		unsigned int col = KEY_COL(key);
+		unsigned short code = KEY_VAL(key);
+
+		keycodes[(row << 4) + col] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	err = init_matrix_gpio(pdev, keypad);
+	if (err)
+		goto err_free_mem;
+
+	err = input_register_device(keypad->input_dev);
+	if (err)
+		goto err_free_mem;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keycodes);
+	kfree(keypad);
+	return err;
+}
+
+static int __devexit matrix_keypad_remove(struct platform_device *pdev)
+{
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	device_init_wakeup(&pdev->dev, 0);
+
+	for (i = 0; i < pdata->num_row_gpios; i++) {
+		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+		gpio_free(pdata->row_gpios[i]);
+	}
+
+	for (i = 0; i < pdata->num_col_gpios; i++)
+		gpio_free(pdata->col_gpios[i]);
+
+	input_unregister_device(keypad->input_dev);
+	platform_set_drvdata(pdev, NULL);
+	kfree(keypad->keycodes);
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver matrix_keypad_driver = {
+	.probe		= matrix_keypad_probe,
+	.remove		= __devexit_p(matrix_keypad_remove),
+	.suspend	= matrix_keypad_suspend,
+	.resume		= matrix_keypad_resume,
+	.driver		= {
+		.name	= "matrix-keypad",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init matrix_keypad_init(void)
+{
+	return platform_driver_register(&matrix_keypad_driver);
+}
+
+static void __exit matrix_keypad_exit(void)
+{
+	platform_driver_unregister(&matrix_keypad_driver);
+}
+
+module_init(matrix_keypad_init);
+module_exit(matrix_keypad_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 2adf9cb..d114d3a 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt button interface driver.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -148,7 +148,7 @@
 	return 0;
 }
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("Cobalt button interface driver");
 MODULE_LICENSE("GPL");
 /* work with hotplug and coldplug */
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 5e5eb88..7b6ce17 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -46,7 +46,7 @@
 	input_sync(input);
 }
 
-static int __init gpio_mouse_probe(struct platform_device *pdev)
+static int __devinit gpio_mouse_probe(struct platform_device *pdev)
 {
 	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
 	struct input_polled_dev *input_poll;
@@ -170,10 +170,8 @@
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:gpio_mouse");
-
 static struct platform_driver gpio_mouse_device_driver = {
+	.probe		= gpio_mouse_probe,
 	.remove		= __devexit_p(gpio_mouse_remove),
 	.driver		= {
 		.name	= "gpio_mouse",
@@ -183,8 +181,7 @@
 
 static int __init gpio_mouse_init(void)
 {
-	return platform_driver_probe(&gpio_mouse_device_driver,
-			gpio_mouse_probe);
+	return platform_driver_register(&gpio_mouse_device_driver);
 }
 module_init(gpio_mouse_init);
 
@@ -197,3 +194,5 @@
 MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
 MODULE_DESCRIPTION("GPIO mouse driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
+
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fb8a3cd..924e8ed 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -392,6 +392,34 @@
 			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
 		},
 	},
+	{
+		.ident = "Acer Aspire One 150",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+		},
+	},
+	{
+		.ident = "Advent 4211",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+		},
+	},
+	{
+		.ident = "Medion Akoya Mini E1210",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+		},
+	},
+	{
+		.ident = "Mivvy M310",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f919bf5..582245c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -934,10 +934,11 @@
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+	if (!i8042_suspended && state.event == PM_EVENT_SUSPEND)
 		i8042_controller_reset();
-		i8042_suspended = true;
-	}
+
+	i8042_suspended = state.event == PM_EVENT_SUSPEND ||
+			  state.event == PM_EVENT_FREEZE;
 
 	return 0;
 }
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index fb17573..d66f494 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -935,10 +935,11 @@
 {
 	struct serio *serio = to_serio_port(dev);
 
-	if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+	if (!serio->suspended && state.event == PM_EVENT_SUSPEND)
 		serio_cleanup(serio);
-		serio->suspended = true;
-	}
+
+	serio->suspended = state.event == PM_EVENT_SUSPEND ||
+			   state.event == PM_EVENT_FREEZE;
 
 	return 0;
 }
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 38bf863..c896d6a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -384,6 +384,8 @@
 			wacom_report_key(wcombo, BTN_STYLUS2, 0);
 			wacom_report_key(wcombo, BTN_TOUCH, 0);
 			wacom_report_abs(wcombo, ABS_WHEEL, 0);
+			if (wacom->features->type >= INTUOS3S)
+				wacom_report_abs(wcombo, ABS_Z, 0);
 		}
 		wacom_report_key(wcombo, wacom->tool[idx], 0);
 		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
@@ -836,6 +838,7 @@
 	{ "Wacom DTU710",        8,  34080, 27660,  511,  0, PL },
 	{ "Wacom DTF521",        8,   6282,  4762,  511,  0, PL },
 	{ "Wacom DTF720",        8,   6858,  5506,  511,  0, PL },
+	{ "Wacom DTF720a",       8,   6858,  5506,  511,  0, PL },
 	{ "Wacom Cintiq Partner",8,  20480, 15360,  511,  0, PTU },
 	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 31, INTUOS },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
@@ -897,8 +900,9 @@
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec51696..2d91049 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@
 	{RSP_OK,      604,604, -1,                605, 5, {ACT_CMD+AT_MSN}},
 	{RSP_OK,      605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
 	{RSP_NULL,    605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      606,606, -1,                607, 5, {0},             "+VLS=17\r"}, /* set "Endgeraetemodus" */
+	{RSP_OK,      606,606, -1,                607, 5, {0}, "+VLS=17\r"},
 	{RSP_OK,      607,607, -1,                608,-1},
-	//{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    608, 0, {ACT_ERROR}},//DELETE
 	{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    609, 5, {ACT_CMD+AT_DIAL}},
 	{RSP_OK,      609,609, -1,                650, 0, {ACT_DIALING}},
 
-	{RSP_ZVLS,    608,608, 17,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCTP,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
 	{RSP_ERROR,   601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 	{EV_TIMEOUT,  601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 
-	/* dialing */
-	{RSP_ZCTP,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZSAU,    650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
+	/* optional dialing responses */
+	{EV_BC_OPEN,  650,650, -1,                651,-1},
+	{RSP_ZVLS,    608,651, 17,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCTP,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCPN,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZSAU,    650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
 
-	/* connection established  */
-	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
-	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+	/* connect */
+	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    651,651,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    751,751,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}},
 
 	/* remote hangup */
-	{RSP_ZSAU,    650,650,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
-	{RSP_ZSAU,    750,750,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
+	{RSP_ZSAU,    650,651,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
+	{RSP_ZSAU,    750,751,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 	{RSP_ZSAU,    800,800,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 
 	/* hangup */
@@ -358,7 +359,8 @@
 	{RSP_ZSAU,    700,729,ZSAU_ACTIVE,          0, 0, {ACT_ABORTACCEPT}},
 	{RSP_ZSAU,    700,729,ZSAU_DISCONNECT_IND,  0, 0, {ACT_ABORTACCEPT}},
 
-	{EV_TIMEOUT,  750,750, -1,                  0, 0, {ACT_CONNTIMEOUT}},
+	{EV_BC_OPEN,  750,750, -1,                751,-1},
+	{EV_TIMEOUT,  750,751, -1,                  0, 0, {ACT_CONNTIMEOUT}},
 
 	/* B channel closed (general case) */
 	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@
 
 static void bchannel_up(struct bc_state *bcs)
 {
-	if (!(bcs->chstate & CHS_D_UP)) {
-		dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
-		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
-	}
-
 	if (bcs->chstate & CHS_B_UP) {
 		dev_notice(bcs->cs->dev, "%s: B channel already up\n",
 			   __func__);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4..bed38fc 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@
 		pr_err("invalid size %d\n", size);
 		return -EINVAL;
 	}
-	src = iwb->read;
-	if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
-		     (read < src && limit >= src))) {
-		pr_err("isoc write buffer frame reservation violated\n");
-		return -EFAULT;
-	}
 #endif
 
 	if (read < write) {
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index ff0e8c3..5f1ce81 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -1,7 +1,7 @@
 /*
  *  LEDs driver for the Cobalt Raq series.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 0f4a70c4..d4351ff 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1756,9 +1756,10 @@
 	__u8 *uuid;
 
 	uuid = sb->set_uuid;
-	printk(KERN_INFO "md:  SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
-			":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
-	       KERN_INFO "md:    Name: \"%s\" CT:%llu\n",
+	printk(KERN_INFO
+	       "md:  SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
+	       ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
+	       "md:    Name: \"%s\" CT:%llu\n",
 		le32_to_cpu(sb->major_version),
 		le32_to_cpu(sb->feature_map),
 		uuid[0], uuid[1], uuid[2], uuid[3],
@@ -1770,12 +1771,13 @@
 		       & MD_SUPERBLOCK_1_TIME_SEC_MASK);
 
 	uuid = sb->device_uuid;
-	printk(KERN_INFO "md:       L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
+	printk(KERN_INFO
+	       "md:       L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
 			" RO:%llu\n"
-	       KERN_INFO "md:     Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
-			":%02x%02x%02x%02x%02x%02x\n"
-	       KERN_INFO "md:       (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
-	       KERN_INFO "md:         (MaxDev:%u) \n",
+	       "md:     Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
+	                ":%02x%02x%02x%02x%02x%02x\n"
+	       "md:       (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
+	       "md:         (MaxDev:%u) \n",
 		le32_to_cpu(sb->level),
 		(unsigned long long)le64_to_cpu(sb->size),
 		le32_to_cpu(sb->raid_disks),
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index b6da9c3..aa20ce8 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1096,8 +1096,19 @@
 	}
 
 	/* All S-code tables need a 200kHz shift */
-	if (priv->ctrl.demod)
+	if (priv->ctrl.demod) {
 		demod = priv->ctrl.demod + 200;
+		/*
+		 * The DTV7 S-code table needs a 700 kHz shift.
+		 * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
+		 *
+		 * DTV7 is only used in Australia.  Germany or Italy may also
+		 * use this firmware after initialization, but a tune to a UHF
+		 * channel should then cause DTV78 to be used.
+		 */
+		if (type & DTV7)
+			demod += 500;
+	}
 
 	return generic_set_freq(fe, p->frequency,
 				T_DIGITAL_TV, type, 0, demod);
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 68eb449..d8d4214 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,5 +1,6 @@
 config TTPCI_EEPROM
 	tristate
+	depends on I2C
 	default n
 
 config DVB_AV7110
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 640421c..46d2163 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1200,7 +1200,7 @@
 			video_unregister_device(radio->videodev);
 			kfree(radio->buffer);
 			kfree(radio);
-			goto done;
+			goto unlock;
 		}
 
 		/* stop rds reception */
@@ -1213,9 +1213,8 @@
 		retval = si470x_stop(radio);
 		usb_autopm_put_interface(radio->intf);
 	}
-
+unlock:
 	mutex_unlock(&radio->disconnect_lock);
-
 done:
 	return retval;
 }
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 061e147..84b6fc1 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -312,6 +312,14 @@
 	  OV7670 VGA camera.  It currently only works with the M88ALP01
 	  controller.
 
+config VIDEO_MT9V011
+	tristate "Micron mt9v011 sensor support"
+	depends on I2C && VIDEO_V4L2
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  mt0v011 1.3 Mpixel camera.  It currently only works with the
+	  em28xx driver.
+
 config VIDEO_TCM825X
 	tristate "TCM825x camera sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 7fb3add..9f2e321 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -69,6 +69,7 @@
 obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
 obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
 obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
 
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index c92a250..36f2d76 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -198,11 +198,14 @@
 
 static const struct cx18_card cx18_card_mpc718 = {
 	.type = CX18_CARD_YUAN_MPC718,
-	.name = "Yuan MPC718",
-	.comment = "Analog video capture works; some audio line in may not.\n",
+	.name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_418_AV,
-	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
 	.video_inputs = {
 		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
 		{ CX18_CARD_INPUT_SVIDEO1,    1,
@@ -211,27 +214,34 @@
 		{ CX18_CARD_INPUT_SVIDEO2,    2,
 				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
 		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
-		{ CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
 	},
 	.audio_inputs = {
 		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
-		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 0 },
-		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL1, 0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
 	},
-	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
 	.tuners = {
 		/* XC3028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
 	.ddr = {
-		/* Probably Samsung K4D263238G-VC33 memory */
-		.chip_config = 0x003,
-		.refresh = 0x30c,
-		.timing1 = 0x23230b73,
-		.timing2 = 0x08,
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
 		.tune_lane = 0,
 		.initial_emrs = 2,
 	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+	/* FIXME - these GPIO's are just guesses */
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x3,
+			      .radio  = 0x1 },
 	.xceive_pin = 0,
 	.pci_list = cx18_pci_mpc718,
 	.i2c = &cx18_i2c_std,
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6ea3fe6..51a0c33 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -30,6 +30,10 @@
 #include "s5h1409.h"
 #include "mxl5005s.h"
 #include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
 #include "tuner-xc2028.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -38,6 +42,11 @@
 #define CX18_CLOCK_ENABLE2		 0xc71024
 #define CX18_DMUX_CLK_MASK		 0x0080
 
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
 static struct mxl5005s_config hauppauge_hvr1600_tuner = {
 	.i2c_address     = 0xC6 >> 1,
 	.if_freq         = IF_FREQ_5380000HZ,
@@ -65,6 +74,9 @@
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
 /* Information/confirmation of proper config values provided by Terry Wu */
 static struct zl10353_config leadtek_dvr3100h_demod = {
 	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
@@ -74,6 +86,121 @@
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+				   const struct firmware **fw)
+{
+	struct cx18 *cx = stream->cx;
+	const char *fn = "dvb-cx18-mpc718-mt352.fw";
+	int ret;
+
+	ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+	if (ret)
+		CX18_ERR("Unable to open firmware file %s\n", fn);
+	else {
+		size_t sz = (*fw)->size;
+		if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+			CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+				 fn, (unsigned long) sz);
+			ret = -EILSEQ;
+			release_firmware(*fw);
+			*fw = NULL;
+		}
+	}
+
+	if (ret) {
+		CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
+			  "demodualtor will not work without it\n");
+		CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
+			  "mpc718' if you need the firmware\n");
+	}
+	return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+	struct cx18_dvb *dvb = container_of(fe->dvb,
+					    struct cx18_dvb, dvb_adapter);
+	struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+	const struct firmware *fw = NULL;
+	int ret;
+	int i;
+	u8 buf[3];
+
+	ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+	if (ret)
+		return ret;
+
+	/* Loop through all the register-value pairs in the firmware file */
+	for (i = 0; i < fw->size; i += 2) {
+		buf[0] = fw->data[i];
+		/* Intercept a few registers we want to set ourselves */
+		switch (buf[0]) {
+		case TRL_NOMINAL_RATE_0:
+			/* Set our custom OFDM bandwidth in the case below */
+			break;
+		case TRL_NOMINAL_RATE_1:
+			/* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+			/* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+			/* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+			buf[1] = 0x72;
+			buf[2] = 0x49;
+			mt352_write(fe, buf, 3);
+			break;
+		case INPUT_FREQ_0:
+			/* Set our custom IF in the case below */
+			break;
+		case INPUT_FREQ_1:
+			/* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+			buf[1] = 0x31;
+			buf[2] = 0xc0;
+			mt352_write(fe, buf, 3);
+			break;
+		default:
+			/* Pass through the register-value pair from the fw */
+			buf[1] = fw->data[i+1];
+			mt352_write(fe, buf, 2);
+			break;
+		}
+	}
+
+	buf[0] = (u8) TUNER_GO;
+	buf[1] = 0x01; /* Go */
+	mt352_write(fe, buf, 2);
+	release_firmware(fw);
+	return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+	.demod_address = 0x1e >> 1,
+	.adc_clock     = 20480,     /* 20.480 MHz */
+	.if2           =  4560,     /*  4.560 MHz */
+	.no_tuner      = 1,         /* XC3028 is not behind the gate */
+	.demod_init    = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -113,6 +240,7 @@
 		break;
 
 	case CX18_CARD_LEADTEK_DVR3100H:
+	case CX18_CARD_YUAN_MPC718:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -326,6 +454,38 @@
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_YUAN_MPC718:
+		/*
+		 * TODO
+		 * Apparently, these cards also could instead have a
+		 * DiBcom demod supported by one of the db7000 drivers
+		 */
+		dvb->fe = dvb_attach(mt352_attach,
+				     &yuan_mpc718_mt352_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe == NULL)
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &yuan_mpc718_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 48a9751..86ac529 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -463,6 +463,30 @@
 	.if_khz = 5380,
 };
 
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+				    struct dvb_frontend_parameters *param)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (param->u.vsb.modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	}
+	return (port->set_frontend_save) ?
+		port->set_frontend_save(fe, param) : -ENODEV;
+}
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -502,6 +526,12 @@
 				   0x60, &dev->i2c_bus[1].i2c_adap,
 				   &hauppauge_hvr127x_config);
 		}
+
+		/* FIXME: temporary hack */
+		/* define bridge override to set_frontend */
+		port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+		fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 1a2ac51..214a55e 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -288,6 +288,10 @@
 	/* Allow a single tsport to have multiple frontends */
 	u32                        num_frontends;
 	void                       *port_priv;
+
+	/* FIXME: temporary hack */
+	int (*set_frontend_save) (struct dvb_frontend *,
+				  struct dvb_frontend_parameters *);
 };
 
 struct cx23885_dev {
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af3..6524b49 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+	select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
 	---help---
 	  This is a video4linux driver for Empia 28xx based TV cards.
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9..ebd24a2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -58,6 +58,8 @@
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
 
+#define MT9V011_VERSION                 0x8243
+
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
 static unsigned long em28xx_devused;
 
@@ -191,6 +193,13 @@
 	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
 	{	-1,		-1,	-1,		-1},
 };
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x01,	0xf7,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
 /*
  *  Board definitions
  */
@@ -438,6 +447,18 @@
 			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
+	[EM2820_BOARD_SILVERCREST_WEBCAM] = {
+		.name         = "Silvercrest Webcam 1.3mpix",
+		.tuner_type   = TUNER_ABSENT,
+		.is_27xx      = 1,
+		.decoder      = EM28XX_MT9V011,
+		.input        = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = silvercrest_reg_seq,
+		} },
+	},
 	[EM2821_BOARD_SUPERCOMP_USB_2] = {
 		.name         = "Supercomp USB 2.0 TV",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -826,7 +847,7 @@
 		.tuner_gpio     = default_tuner_gpio,
 		.decoder        = EM28XX_TVP5150,
 		.has_dvb        = 1,
-		.dvb_gpio       = default_analog,
+		.dvb_gpio       = default_digital,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1639,6 +1660,11 @@
 	I2C_CLIENT_END
 };
 
+static unsigned short mt9v011_addrs[] = {
+	0xba >> 1,
+	I2C_CLIENT_END
+};
+
 static unsigned short msp3400_addrs[] = {
 	0x80 >> 1,
 	0x88 >> 1,
@@ -1678,6 +1704,46 @@
 				       EM28XX_I2C_FREQ_100_KHZ;
 }
 
+/* HINT method: webcam I2C chips
+ *
+ * This method work for webcams with Micron sensors
+ */
+static int em28xx_hint_sensor(struct em28xx *dev)
+{
+	int rc;
+	char *sensor_name;
+	unsigned char cmd;
+	__be16 version_be;
+	u16 version;
+
+	if (dev->model != EM2820_BOARD_UNKNOWN)
+		return 0;
+
+	dev->i2c_client.addr = 0xba >> 1;
+	cmd = 0;
+	i2c_master_send(&dev->i2c_client, &cmd, 1);
+	rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+	if (rc != 2)
+		return -EINVAL;
+
+	version = be16_to_cpu(version_be);
+
+	switch (version) {
+	case MT9V011_VERSION:
+		dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+		sensor_name = "mt9v011";
+		break;
+	default:
+		printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+		return -EINVAL;
+	}
+
+	em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+		      sensor_name, em28xx_boards[dev->model].name);
+
+	return 0;
+}
+
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
  * this won't work for boards with generic PCI IDs
  */
@@ -1706,7 +1772,10 @@
 			em28xx_info("chip ID is em2750\n");
 			break;
 		case CHIP_ID_EM2820:
-			em28xx_info("chip ID is em2820\n");
+			if (dev->board.is_27xx)
+				em28xx_info("chip is em2710\n");
+			else
+				em28xx_info("chip ID is em2820\n");
 			break;
 		case CHIP_ID_EM2840:
 			em28xx_info("chip ID is em2840\n");
@@ -2158,6 +2227,10 @@
 		   before probing the i2c bus. */
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
+	case EM2820_BOARD_SILVERCREST_WEBCAM:
+		/* FIXME: need to document the registers bellow */
+		em28xx_write_reg(dev, 0x0d, 0x42);
+		em28xx_write_reg(dev, 0x13, 0x08);
 	}
 
 	if (dev->board.has_snapshot_button)
@@ -2189,6 +2262,10 @@
 		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvp5150", "tvp5150", tvp5150_addrs);
 
+	if (dev->board.decoder == EM28XX_MT9V011)
+		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"mt9v011", "mt9v011", mt9v011_addrs);
+
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
@@ -2333,6 +2410,8 @@
 		return errCode;
 	}
 
+	em28xx_hint_sensor(dev);
+
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
 
@@ -2573,6 +2652,7 @@
 	retval = em28xx_init_dev(&dev, udev, interface, nr);
 	if (retval) {
 		em28xx_devused &= ~(1<<dev->devno);
+		mutex_unlock(&dev->lock);
 		kfree(dev);
 		goto err;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8..079ab4d 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,17 +648,28 @@
 int em28xx_set_outfmt(struct em28xx *dev)
 {
 	int ret;
+	int vinmode, vinctl, outfmt;
+
+	outfmt  = dev->format->reg;
+
+	if (dev->board.is_27xx) {
+		vinmode = 0x0d;
+		vinctl  = 0x00;
+	} else {
+		vinmode = 0x10;
+		vinctl  = 0x11;
+	}
 
 	ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
-				    dev->format->reg | 0x20, 0x3f);
+				outfmt | 0x20, 0xff);
+	if (ret < 0)
+			return ret;
+
+	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
 	if (ret < 0)
 		return ret;
 
-	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
-	if (ret < 0)
-		return ret;
-
-	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +706,19 @@
 {
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
-	if (dev->board.is_em2800)
+
+	if (dev->board.is_27xx) {
+		/* FIXME: Don't use the scaler yet */
+		mode = 0;
+	} else if (dev->board.is_em2800) {
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
-	else {
+	} else {
 		u8 buf[2];
+
 		buf[0] = h;
 		buf[1] = h >> 8;
 		em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
 		buf[0] = v;
 		buf[1] = v >> 8;
 		em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -720,8 +737,11 @@
 	height = norm_maxh(dev) >> 1;
 
 	em28xx_set_outfmt(dev);
+
+
 	em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
 	em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
 	return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e7b47c8..3da97c3 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -243,6 +243,14 @@
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.parallel_ts = 1,
+	.if2 = 45600,
+};
+
 #ifdef EM28XX_DRX397XD_SUPPORT
 /* [TODO] djh - not sure yet what the device config needs to contain */
 static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -433,7 +441,6 @@
 		}
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_KWORLD_DVB_310U:
 	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
@@ -444,6 +451,25 @@
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+		dvb->frontend = dvb_attach(zl10353_attach,
+					   &em28xx_terratec_xs_zl10353_xc3028,
+					   &dev->i2c_adap);
+		if (dvb->frontend == NULL) {
+			/* This board could have either a zl10353 or a mt352.
+			   If the chip id isn't for zl10353, try mt352 */
+
+			/* FIXME: make support for mt352 work */
+			printk(KERN_ERR "version of this board with mt352 not "
+			       "currently supported\n");
+			result = -EINVAL;
+			goto out_free;
+		}
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
 	case EM2882_BOARD_EVGA_INDTUBE:
 		dvb->frontend = dvb_attach(s5h1409_attach,
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 2c86fcf..27e33a2 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -483,7 +483,7 @@
 	[0xa0 >> 1] = "eeprom",
 	[0xb0 >> 1] = "tda9874",
 	[0xb8 >> 1] = "tvp5150a",
-	[0xba >> 1] = "tvp5150a",
+	[0xba >> 1] = "webcam sensor or tvp5150a",
 	[0xc0 >> 1] = "tuner (analog)",
 	[0xc2 >> 1] = "tuner (analog)",
 	[0xc4 >> 1] = "tuner (analog)",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8fe1bee..14316c9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -90,10 +90,35 @@
 /* supported video standards */
 static struct em28xx_fmt format[] = {
 	{
-		.name     = "16bpp YUY2, 4:2:2, packed",
+		.name     = "16 bpp YUY2, 4:2:2, packed",
 		.fourcc   = V4L2_PIX_FMT_YUYV,
 		.depth    = 16,
 		.reg	  = EM28XX_OUTFMT_YUV422_Y0UY1V,
+	}, {
+		.name     = "16 bpp RGB 565, LE",
+		.fourcc   = V4L2_PIX_FMT_RGB565,
+		.depth    = 16,
+		.reg      = EM28XX_OUTFMT_RGB_16_656,
+	}, {
+		.name     = "8 bpp Bayer BGBG..GRGR",
+		.fourcc   = V4L2_PIX_FMT_SBGGR8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_BGBG,
+	}, {
+		.name     = "8 bpp Bayer GRGR..BGBG",
+		.fourcc   = V4L2_PIX_FMT_SGRBG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GRGR,
+	}, {
+		.name     = "8 bpp Bayer GBGB..RGRG",
+		.fourcc   = V4L2_PIX_FMT_SGBRG8,
+		.depth    = 8,
+		.reg      = EM28XX_OUTFMT_RGB_8_GBGB,
+	}, {
+		.name     = "12 bpp YUV411",
+		.fourcc   = V4L2_PIX_FMT_YUV411P,
+		.depth    = 12,
+		.reg      = EM28XX_OUTFMT_YUV411,
 	},
 };
 
@@ -701,7 +726,11 @@
 		return -EINVAL;
 	}
 
-	if (dev->board.is_em2800) {
+	if (dev->board.is_27xx) {
+		/* FIXME: This is the only supported fmt */
+		width  = 640;
+		height = 480;
+	} else if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
 		height = height > (3 * maxh / 4) ? maxh : maxh / 2;
 		width = width > (3 * maxw / 4) ? maxw : maxw / 2;
@@ -733,13 +762,40 @@
 	return 0;
 }
 
+static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
+				   unsigned width, unsigned height)
+{
+	struct em28xx_fmt     *fmt;
+
+	/* FIXME: This is the only supported fmt */
+	if (dev->board.is_27xx) {
+		width  = 640;
+		height = 480;
+	}
+
+	fmt = format_by_fourcc(fourcc);
+	if (!fmt)
+		return -EINVAL;
+
+	dev->format = fmt;
+	dev->width  = width;
+	dev->height = height;
+
+	/* set new image size */
+	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+
+	em28xx_set_alternate(dev);
+	em28xx_resolution_set(dev);
+
+	return 0;
+}
+
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 			struct v4l2_format *f)
 {
 	struct em28xx_fh      *fh  = priv;
 	struct em28xx         *dev = fh->dev;
 	int                   rc;
-	struct em28xx_fmt     *fmt;
 
 	rc = check_dev(dev);
 	if (rc < 0)
@@ -749,12 +805,6 @@
 
 	vidioc_try_fmt_vid_cap(file, priv, f);
 
-	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
-	if (!fmt) {
-		rc = -EINVAL;
-		goto out;
-	}
-
 	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
 		em28xx_errdev("%s queue busy\n", __func__);
 		rc = -EBUSY;
@@ -767,16 +817,8 @@
 		goto out;
 	}
 
-	/* set new image size */
-	dev->width = f->fmt.pix.width;
-	dev->height = f->fmt.pix.height;
-	dev->format = fmt;
-	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
-
-	em28xx_set_alternate(dev);
-	em28xx_resolution_set(dev);
-
-	rc = 0;
+	rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
+				f->fmt.pix.width, f->fmt.pix.height);
 
 out:
 	mutex_unlock(&dev->lock);
@@ -1616,11 +1658,6 @@
 	filp->private_data = fh;
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
-		dev->width = norm_maxw(dev);
-		dev->height = norm_maxh(dev);
-		dev->hscale = 0;
-		dev->vscale = 0;
-
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		em28xx_set_alternate(dev);
 		em28xx_resolution_set(dev);
@@ -1962,15 +1999,14 @@
 
 	/* set default norm */
 	dev->norm = em28xx_video_template.current_norm;
-	dev->width = norm_maxw(dev);
-	dev->height = norm_maxh(dev);
 	dev->interlaced = EM28XX_INTERLACED_DEFAULT;
-	dev->hscale = 0;
-	dev->vscale = 0;
 	dev->ctl_input = 0;
 
 	/* Analog specific initialization */
 	dev->format = &format[0];
+	em28xx_set_video_format(dev, format[0].fourcc,
+				norm_maxw(dev), norm_maxh(dev));
+
 	video_mux(dev, dev->ctl_input);
 
 	/* Audio defaults */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45..d90fef4 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
 #define EM2860_BOARD_TERRATEC_AV350		  68
 #define EM2882_BOARD_KWORLD_ATSC_315U		  69
 #define EM2882_BOARD_EVGA_INDTUBE		  70
+#define EM2820_BOARD_SILVERCREST_WEBCAM           71
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -360,6 +361,7 @@
 	EM28XX_NODECODER,
 	EM28XX_TVP5150,
 	EM28XX_SAA711X,
+	EM28XX_MT9V011,
 };
 
 enum em28xx_adecoder {
@@ -388,6 +390,7 @@
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
+	unsigned int is_27xx:1;
 	unsigned int valid:1;
 
 	unsigned char xclk, i2c_speed;
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 9df7137..992ce53 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -36,10 +36,6 @@
 
 #define STV_ISOC_ENDPOINT_ADDR		0x81
 
-#ifndef V4L2_PIX_FMT_SGRBG8
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
-#endif
-
 #define STV_REG23 			0x0423
 
 /* Control registers of the STV0600 ASIC */
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
new file mode 100644
index 0000000..1fe8fc9
--- /dev/null
+++ b/drivers/media/video/mt9v011.c
@@ -0,0 +1,431 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <media/v4l2-device.h>
+#include "mt9v011.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* supported controls */
+static struct v4l2_queryctrl mt9v011_qctrl[] = {
+	{
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = 0,
+		.maximum = (1 << 10) - 1,
+		.step = 1,
+		.default_value = 0x0020,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_RED_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Red Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	}, {
+		.id = V4L2_CID_BLUE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Blue Balance",
+		.minimum = -1 << 9,
+		.maximum = (1 << 9) - 1,
+		.step = 1,
+		.default_value = 0,
+		.flags = 0,
+	},
+};
+
+struct mt9v011 {
+	struct v4l2_subdev sd;
+	unsigned width, height;
+
+	u16 global_gain, red_bal, blue_bal;
+};
+
+static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct mt9v011, sd);
+}
+
+static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	__be16 buffer;
+	int rc, val;
+
+	rc = i2c_master_send(c, &addr, 1);
+	if (rc != 1)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 1)\n", rc);
+
+	msleep(10);
+
+	rc = i2c_master_recv(c, (char *)&buffer, 2);
+	if (rc != 2)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 2)\n", rc);
+
+	val = be16_to_cpu(buffer);
+
+	v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
+
+	return val;
+}
+
+static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
+				 u16 value)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(sd);
+	unsigned char buffer[3];
+	int rc;
+
+	buffer[0] = addr;
+	buffer[1] = value >> 8;
+	buffer[2] = value & 0xff;
+
+	v4l2_dbg(2, debug, sd,
+		 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
+	rc = i2c_master_send(c, buffer, 3);
+	if (rc != 3)
+		v4l2_dbg(0, debug, sd,
+			 "i2c i/o error: rc == %d (should be 3)\n", rc);
+}
+
+
+struct i2c_reg_value {
+	unsigned char reg;
+	u16           value;
+};
+
+/*
+ * Values used at the original driver
+ * Some values are marked as Reserved at the datasheet
+ */
+static const struct i2c_reg_value mt9v011_init_default[] = {
+		{ R0D_MT9V011_RESET, 0x0001 },
+		{ R0D_MT9V011_RESET, 0x0000 },
+
+		{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+		{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
+
+		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
+		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
+		{ R20_MT9V011_READ_MODE, 0x1000 },
+
+		{ R07_MT9V011_OUT_CTRL, 0x000a },	/* chip enable */
+};
+
+static void set_balance(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u16 green1_gain, green2_gain, blue_gain, red_gain;
+
+	green1_gain = core->global_gain;
+	green2_gain = core->global_gain;
+
+	blue_gain = core->global_gain +
+		    core->global_gain * core->blue_bal / (1 << 9);
+
+	red_gain = core->global_gain +
+		   core->global_gain * core->blue_bal / (1 << 9);
+
+	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
+	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN,  green1_gain);
+	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
+	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+}
+
+static void set_res(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned vstart, hstart;
+
+	/*
+	 * The mt9v011 doesn't have scaling. So, in order to select the desired
+	 * resolution, we're cropping at the middle of the sensor.
+	 * hblank and vblank should be adjusted, in order to warrant that
+	 * we'll preserve the line timings for 30 fps, no matter what resolution
+	 * is selected.
+	 * NOTE: datasheet says that width (and height) should be filled with
+	 * width-1. However, this doesn't work, since one pixel per line will
+	 * be missing.
+	 */
+
+	hstart = 14 + (640 - core->width) / 2;
+	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
+	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
+	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
+
+	vstart = 8 + (640 - core->height) / 2;
+	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
+	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
+	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+};
+
+static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
+		mt9v011_write(sd, mt9v011_init_default[i].reg,
+			       mt9v011_init_default[i].value);
+
+	set_balance(sd);
+	set_res(sd);
+
+	return 0;
+};
+
+static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+
+	v4l2_dbg(1, debug, sd, "g_ctrl called\n");
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		ctrl->value = core->global_gain;
+		return 0;
+	case V4L2_CID_RED_BALANCE:
+		ctrl->value = core->red_bal;
+		return 0;
+	case V4L2_CID_BLUE_BALANCE:
+		ctrl->value = core->blue_bal;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	u8 i, n;
+	n = ARRAY_SIZE(mt9v011_qctrl);
+
+	for (i = 0; i < n; i++) {
+		if (ctrl->id != mt9v011_qctrl[i].id)
+			continue;
+		if (ctrl->value < mt9v011_qctrl[i].minimum ||
+		    ctrl->value > mt9v011_qctrl[i].maximum)
+			return -ERANGE;
+		v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
+					ctrl->id, ctrl->value);
+		break;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		core->global_gain = ctrl->value;
+		break;
+	case V4L2_CID_RED_BALANCE:
+		core->red_bal = ctrl->value;
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		core->blue_bal = ctrl->value;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	set_balance(sd);
+
+	return 0;
+}
+
+static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	fmt->flags = 0;
+	strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
+	fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
+
+	return 0;
+}
+
+static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+		return -EINVAL;
+
+	v4l_bound_align_image(&pix->width, 48, 639, 1,
+			      &pix->height, 32, 480, 1, 0);
+
+	return 0;
+}
+
+static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct mt9v011 *core = to_mt9v011(sd);
+	int rc;
+
+	rc = mt9v011_try_fmt(sd, fmt);
+	if (rc < 0)
+		return -EINVAL;
+
+	core->width = pix->width;
+	core->height = pix->height;
+
+	set_res(sd);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mt9v011_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	reg->val = mt9v011_read(sd, reg->reg & 0xff);
+	reg->size = 2;
+
+	return 0;
+}
+
+static int mt9v011_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
+
+	return 0;
+}
+#endif
+
+static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
+					  MT9V011_VERSION);
+}
+
+static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+	.g_ctrl = mt9v011_g_ctrl,
+	.s_ctrl = mt9v011_s_ctrl,
+	.reset = mt9v011_reset,
+	.g_chip_ident = mt9v011_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = mt9v011_g_register,
+	.s_register = mt9v011_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
+	.enum_fmt = mt9v011_enum_fmt,
+	.try_fmt = mt9v011_try_fmt,
+	.s_fmt = mt9v011_s_fmt,
+};
+
+static const struct v4l2_subdev_ops mt9v011_ops = {
+	.core  = &mt9v011_core_ops,
+	.video = &mt9v011_video_ops,
+};
+
+
+/****************************************************************************
+			I2C Client & Driver
+ ****************************************************************************/
+
+static int mt9v011_probe(struct i2c_client *c,
+			 const struct i2c_device_id *id)
+{
+	u16 version;
+	struct mt9v011 *core;
+	struct v4l2_subdev *sd;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(c->adapter,
+	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+		return -EIO;
+
+	core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	sd = &core->sd;
+	v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+
+	/* Check if the sensor is really a MT9V011 */
+	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+	if (version != MT9V011_VERSION) {
+		v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+			  version);
+		kfree(core);
+		return -EINVAL;
+	}
+
+	core->global_gain = 0x0024;
+	core->width  = 640;
+	core->height = 480;
+
+	v4l_info(c, "chip found @ 0x%02x (%s)\n",
+		 c->addr << 1, c->adapter->name);
+
+	return 0;
+}
+
+static int mt9v011_remove(struct i2c_client *c)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(c);
+
+	v4l2_dbg(1, debug, sd,
+		"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
+		c->addr << 1);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_mt9v011(sd));
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id mt9v011_id[] = {
+	{ "mt9v011", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v011_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+	.name = "mt9v011",
+	.probe = mt9v011_probe,
+	.remove = mt9v011_remove,
+	.id_table = mt9v011_id,
+};
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
new file mode 100644
index 0000000..9e443ee
--- /dev/null
+++ b/drivers/media/video/mt9v011.h
@@ -0,0 +1,35 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#ifndef MT9V011_H_
+#define MT9V011_H_
+
+#define R00_MT9V011_CHIP_VERSION	0x00
+#define R01_MT9V011_ROWSTART		0x01
+#define R02_MT9V011_COLSTART		0x02
+#define R03_MT9V011_HEIGHT		0x03
+#define R04_MT9V011_WIDTH		0x04
+#define R05_MT9V011_HBLANK		0x05
+#define R06_MT9V011_VBLANK		0x06
+#define R07_MT9V011_OUT_CTRL		0x07
+#define R09_MT9V011_SHUTTER_WIDTH	0x09
+#define R0A_MT9V011_CLK_SPEED		0x0a
+#define R0B_MT9V011_RESTART		0x0b
+#define R0C_MT9V011_SHUTTER_DELAY	0x0c
+#define R0D_MT9V011_RESET		0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM	0x1e
+#define R20_MT9V011_READ_MODE		0x20
+#define R2B_MT9V011_GREEN_1_GAIN	0x2b
+#define R2C_MT9V011_BLUE_GAIN		0x2c
+#define R2D_MT9V011_RED_GAIN		0x2d
+#define R2E_MT9V011_GREEN_2_GAIN	0x2e
+#define R35_MT9V011_GLOBAL_GAIN		0x35
+#define RF1_MT9V011_CHIP_ENABLE		0xf1
+
+#define MT9V011_VERSION			0x8243
+
+#endif
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 16f595d..9f5ae81 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -237,11 +237,11 @@
 		return -ENOMEM;
 
 	icd->num_user_formats = fmts;
-	fmts = 0;
 
 	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
 
 	/* Second pass - actually fill data formats */
+	fmts = 0;
 	for (i = 0; i < icd->num_formats; i++)
 		if (!ici->ops->get_formats) {
 			icd->user_formats[i].host_fmt = icd->formats + i;
@@ -877,8 +877,11 @@
 			(unsigned short)~0;
 
 		ret = soc_camera_init_user_formats(icd);
-		if (ret < 0)
+		if (ret < 0) {
+			if (icd->ops->remove)
+				icd->ops->remove(icd);
 			goto eiufmt;
+		}
 
 		icd->height	= DEFAULT_HEIGHT;
 		icd->width	= DEFAULT_WIDTH;
@@ -902,8 +905,10 @@
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
 
+	mutex_lock(&icd->video_lock);
 	if (icd->ops->remove)
 		icd->ops->remove(icd);
+	mutex_unlock(&icd->video_lock);
 
 	soc_camera_free_user_formats(icd);
 
@@ -1145,6 +1150,7 @@
 }
 EXPORT_SYMBOL(soc_camera_video_start);
 
+/* Called from client .remove() methods with .video_lock held */
 void soc_camera_video_stop(struct soc_camera_device *icd)
 {
 	struct video_device *vdev = icd->vdev;
@@ -1154,10 +1160,8 @@
 	if (!icd->dev.parent || !vdev)
 		return;
 
-	mutex_lock(&icd->video_lock);
 	video_unregister_device(vdev);
 	icd->vdev = NULL;
-	mutex_unlock(&icd->video_lock);
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index cd72668..7705fc6 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -343,6 +343,53 @@
 #define TO_U(r, g, b) \
 	(((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128)
 
+/* precalculate color bar values to speed up rendering */
+static void precalculate_bars(struct vivi_fh *fh)
+{
+	struct vivi_dev *dev = fh->dev;
+	unsigned char r, g, b;
+	int k, is_yuv;
+
+	fh->input = dev->input;
+
+	for (k = 0; k < 8; k++) {
+		r = bars[fh->input].bar[k][0];
+		g = bars[fh->input].bar[k][1];
+		b = bars[fh->input].bar[k][2];
+		is_yuv = 0;
+
+		switch (fh->fmt->fourcc) {
+		case V4L2_PIX_FMT_YUYV:
+		case V4L2_PIX_FMT_UYVY:
+			is_yuv = 1;
+			break;
+		case V4L2_PIX_FMT_RGB565:
+		case V4L2_PIX_FMT_RGB565X:
+			r >>= 3;
+			g >>= 2;
+			b >>= 3;
+			break;
+		case V4L2_PIX_FMT_RGB555:
+		case V4L2_PIX_FMT_RGB555X:
+			r >>= 3;
+			g >>= 3;
+			b >>= 3;
+			break;
+		}
+
+		if (is_yuv) {
+			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
+			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
+			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
+		} else {
+			fh->bars[k][0] = r;
+			fh->bars[k][1] = g;
+			fh->bars[k][2] = b;
+		}
+	}
+
+}
+
 #define TSTAMP_MIN_Y	24
 #define TSTAMP_MAX_Y	(TSTAMP_MIN_Y + 15)
 #define TSTAMP_INPUT_X	10
@@ -755,6 +802,8 @@
 	buf->vb.height = fh->height;
 	buf->vb.field  = field;
 
+	precalculate_bars(fh);
+
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
 		rc = videobuf_iolock(vq, &buf->vb, NULL);
 		if (rc < 0)
@@ -893,53 +942,6 @@
 	return 0;
 }
 
-/* precalculate color bar values to speed up rendering */
-static void precalculate_bars(struct vivi_fh *fh)
-{
-	struct vivi_dev *dev = fh->dev;
-	unsigned char r, g, b;
-	int k, is_yuv;
-
-	fh->input = dev->input;
-
-	for (k = 0; k < 8; k++) {
-		r = bars[fh->input].bar[k][0];
-		g = bars[fh->input].bar[k][1];
-		b = bars[fh->input].bar[k][2];
-		is_yuv = 0;
-
-		switch (fh->fmt->fourcc) {
-		case V4L2_PIX_FMT_YUYV:
-		case V4L2_PIX_FMT_UYVY:
-			is_yuv = 1;
-			break;
-		case V4L2_PIX_FMT_RGB565:
-		case V4L2_PIX_FMT_RGB565X:
-			r >>= 3;
-			g >>= 2;
-			b >>= 3;
-			break;
-		case V4L2_PIX_FMT_RGB555:
-		case V4L2_PIX_FMT_RGB555X:
-			r >>= 3;
-			g >>= 3;
-			b >>= 3;
-			break;
-		}
-
-		if (is_yuv) {
-			fh->bars[k][0] = TO_Y(r, g, b);	/* Luma */
-			fh->bars[k][1] = TO_U(r, g, b);	/* Cb */
-			fh->bars[k][2] = TO_V(r, g, b);	/* Cr */
-		} else {
-			fh->bars[k][0] = r;
-			fh->bars[k][1] = g;
-			fh->bars[k][2] = b;
-		}
-	}
-
-}
-
 /*FIXME: This seems to be generic enough to be at videodev2 */
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_format *f)
@@ -965,8 +967,6 @@
 	fh->vb_vidq.field = f->fmt.pix.field;
 	fh->type          = f->type;
 
-	precalculate_bars(fh);
-
 	ret = 0;
 out:
 	mutex_unlock(&q->vb_lock);
@@ -1357,6 +1357,7 @@
 		goto unreg_dev;
 
 	*vfd = vivi_template;
+	vfd->debug = debug;
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
 	if (ret < 0)
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 7ac12cb..5b6e58a 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -32,8 +32,7 @@
  * This driver was tested with firmware revision A4.
  */
 
-#if defined(CONFIG_KEYBOARD_DM355EVM) \
-		|| defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE)
 #define msp_has_keyboard()	true
 #else
 #define msp_has_keyboard()	false
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 671a7ef..c1de4af 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -238,8 +238,10 @@
 	mutex_lock(&pcap->adc_mutex);
 	req = pcap->adc_queue[pcap->adc_head];
 
-	if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+	if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) {
+		mutex_unlock(&pcap->adc_mutex);
 		return IRQ_HANDLED;
+	}
 
 	/* read requested channels results */
 	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 4c7b796..0cc5eef 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -367,7 +367,8 @@
 		break;
 
 	default:
-		return -1;
+		gate = -1;
+		goto already;
 	}
 
 	writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 8d1c60a..5d778ec 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -235,7 +235,7 @@
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	dev_dbg(xpnet, "passing skb to network layer\n"
-		KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+		"\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n",
 		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
 		skb_end_pointer(skb), skb->len);
@@ -399,7 +399,7 @@
 	msg->buf_pa = xp_pa((void *)start_addr);
 
 	dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-		KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+		"msg->buf_pa=0x%lx, msg->size=%u, "
 		"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
 		dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
 		msg->leadin_ignore, msg->tailout_ignore);
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 85a1817..08787f5 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -569,16 +569,8 @@
 
 #ifdef DEBUG_DRIVER
 	/* dump the packet */
-	{
-		int i;
-
-		for (i = 0; i < 64; i++) {
-			if ((i % 16) == 0)
-				printk("\n" KERN_DEBUG);
-			printk ("%2.2x ", skb->data [i]);
-		}
-		printk("\n");
-	}
+	print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE,
+		       16, 1, skb->data, 64, true);
 #endif
 	entry = lp->tx_new & lp->tx_ring_mod_mask;
 	ib->btx_ring [entry].length = (-skblen) | 0xf000;
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index d6d4ab3..7d227cda 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -158,15 +158,12 @@
 void arcnet_dump_skb(struct net_device *dev,
 		     struct sk_buff *skb, char *desc)
 {
-	int i;
+	char hdr[32];
 
-	printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc);
-	for (i = 0; i < skb->len; i++) {
-		if (i % 16 == 0)
-			printk("\n" KERN_DEBUG "[%04X] ", i);
-		printk("%02X ", ((u_char *) skb->data)[i]);
-	}
-	printk("\n");
+	/* dump the packet */
+	snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc);
+	print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+		       16, 1, skb->data, skb->len, true);
 }
 
 EXPORT_SYMBOL(arcnet_dump_skb);
@@ -184,6 +181,7 @@
 	int i, length;
 	unsigned long flags = 0;
 	static uint8_t buf[512];
+	char hdr[32];
 
 	/* hw.copy_from_card expects IRQ context so take the IRQ lock
 	   to keep it single threaded */
@@ -197,14 +195,10 @@
 	/* if the offset[0] byte is nonzero, this is a 256-byte packet */
 	length = (buf[2] ? 256 : 512);
 
-	printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc);
-	for (i = 0; i < length; i++) {
-		if (i % 16 == 0)
-			printk("\n" KERN_DEBUG "[%04X] ", i);
-		printk("%02X ", buf[i]);
-	}
-	printk("\n");
-
+	/* dump the packet */
+	snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc);
+	print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+		       16, 1, buf, length, true);
 }
 
 #else
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805..29c33c7 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK  	0x7 	/* bits 26 - 28 */
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT	26
 
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 			0xC18
+#define CEV_ISR_SIZE				4
+
 /********* Event Q door bell *************/
 #define DB_EQ_OFFSET			DB_CQ_OFFSET
 #define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 308eb09..c43f6a1 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1274,15 +1274,17 @@
 {
 	struct be_adapter *adapter = dev;
 	struct be_ctrl_info *ctrl = &adapter->ctrl;
-	int rx, tx;
+        int isr;
 
-	tx = event_handle(ctrl, &adapter->tx_eq);
-	rx = event_handle(ctrl, &adapter->rx_eq);
+	isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+                      ctrl->pci_func * CEV_ISR_SIZE);
+	if (!isr)
+                return IRQ_NONE;
 
-	if (rx || tx)
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
+        event_handle(ctrl, &adapter->tx_eq);
+        event_handle(ctrl, &adapter->rx_eq);
+
+        return IRQ_HANDLED;
 }
 
 static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 9578a3d..206144f 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -428,10 +428,11 @@
 	printk(KERN_DEBUG "phy registers:");
 	for (addr = 0; addr < 32; ++addr) {
 		if ((addr & 7) == 0)
-			printk("\n" KERN_DEBUG);
-		printk(" %.4x", bmac_mif_read(dev, addr));
+			printk(KERN_DEBUG);
+		printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
+
 	if (bp->is_bmac_plus) {
 		unsigned int capable, ctrl;
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8678457..85a737c 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@
 	u16			rx_quick_cons_trip;
 	u16			rx_ticks_int;
 	u16			rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT		(0xf0*12)
 
 	u32			lin_cnt;
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 951714a..c36a5f3 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -484,8 +484,9 @@
 
 	mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
 	mark = ((mark + 0x3) & ~0x3);
-	printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
+	printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
 
+	printk(KERN_ERR PFX);
 	for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
 		for (word = 0; word < 8; word++)
 			data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
@@ -500,7 +501,7 @@
 		data[8] = 0x0;
 		printk(KERN_CONT "%s", (char *)data);
 	}
-	printk("\n" KERN_ERR PFX "end of fw dump\n");
+	printk(KERN_ERR PFX "end of fw dump\n");
 }
 
 static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -4434,7 +4435,7 @@
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     U_SB_ETH_RX_CQ_INDEX),
-			 bp->rx_ticks ? 0 : 1);
+			 (bp->rx_ticks/12) ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4445,7 @@
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     C_SB_ETH_TX_CQ_INDEX),
-			 bp->tx_ticks ? 0 : 1);
+			 (bp->tx_ticks/12) ? 0 : 1);
 	}
 }
 
@@ -7354,7 +7355,7 @@
 #ifdef BNX2X_STOP_ON_ERROR
 	BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
 		  " so reset not done to allow debug dump,\n"
-	 KERN_ERR " you will need to reboot when done\n");
+		  " you will need to reboot when done\n");
 	return;
 #endif
 
@@ -9069,12 +9070,12 @@
 	struct bnx2x *bp = netdev_priv(dev);
 
 	bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
-	if (bp->rx_ticks > 3000)
-		bp->rx_ticks = 3000;
+	if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
-	if (bp->tx_ticks > 0x3000)
-		bp->tx_ticks = 0x3000;
+	if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 538dda4..fb5df5c 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -642,8 +642,7 @@
 		struct port_info *pi = netdev_priv(dev);
 
 		pi->qs = &adap->sge.qs[pi->first_qset];
-		for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
-		     ++j, ++qset_idx) {
+		for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
 			set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
 			err = t3_sge_alloc_qset(adap, qset_idx, 1,
 				(adap->flags & USING_MSIX) ? qset_idx + 1 :
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2df8fb0..12fd446 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1820,11 +1820,19 @@
 	struct device *emac_dev = &priv->ndev->dev;
 	struct sockaddr *sa = addr;
 
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EINVAL;
+
 	/* Store mac addr in priv and rx channel and set it in EMAC hw */
 	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
-	memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
 	memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
-	emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+	/* If the interface is down - rxch is NULL. */
+	/* MAC address is configured only after the interface is enabled. */
+	if (netif_running(ndev)) {
+		memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+		emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+	}
 
 	if (netif_msg_drv(priv))
 		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 895d721..4b6a219 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -268,8 +268,9 @@
 		printk(KERN_INFO "tx_coalesce:\t%d packets\n",
 				tx_coalesce);
 	if (np->coalesce)
-		printk(KERN_INFO "rx_coalesce:\t%d packets\n"
-		       KERN_INFO "rx_timeout: \t%d ns\n",
+		printk(KERN_INFO
+		       "rx_coalesce:\t%d packets\n"
+		       "rx_timeout: \t%d ns\n",
 				np->rx_coalesce, np->rx_timeout*640);
 	if (np->vlan)
 		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
@@ -1522,9 +1523,9 @@
 			printk (KERN_INFO "Operating at 10 Mbps, ");
 		}
 		if (bmcr & MII_BMCR_DUPLEX_MODE) {
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 	}
 	if (np->tx_flow)
@@ -1614,9 +1615,9 @@
 		}
 		if (np->full_duplex) {
 			bmcr |= MII_BMCR_DUPLEX_MODE;
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 #if 0
 		/* Set 1000BaseT Master/Slave setting */
@@ -1669,9 +1670,9 @@
 		__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
 		printk (KERN_INFO "Operating at 1000 Mbps, ");
 		if (bmcr & MII_BMCR_DUPLEX_MODE) {
-			printk ("Full duplex\n");
+			printk (KERN_CONT "Full duplex\n");
 		} else {
-			printk ("Half duplex\n");
+			printk (KERN_CONT "Half duplex\n");
 		}
 	}
 	if (np->tx_flow)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97..c0f185b 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
 
 /* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
 #define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
 
+#define PHY_CONTROL_LB   0x4000 /* PHY Loopback bit */
+
 /* NVM Control */
 #define E1000_EECD_SK        0x00000001 /* NVM Clock */
 #define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0..fd44d9f 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
 	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
+	E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -302,6 +303,9 @@
 #define E1000_KMRNCTRLSTA_REN		0x00200000
 #define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
 #define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE	0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE	0x1400
 
 #define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
 #define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50..d56c747 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,6 +338,7 @@
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	union ich8_hws_flash_status hsfsts;
 	u32 gfpreg;
 	u32 sector_base_addr;
 	u32 sector_end_addr;
@@ -374,6 +375,20 @@
 	/* Adjust to word count */
 	nvm->flash_bank_size /= sizeof(u16);
 
+	/*
+	 * Make sure the flash bank size does not overwrite the 4k
+	 * sector ranges. We may have 64k allotted to us but we only care
+	 * about the first 2 4k sectors. Therefore, if we have anything less
+	 * than 64k set in the HSFSTS register, we will reduce the bank size
+	 * down to 4k and let the rest remain unused. If berasesz == 3, then
+	 * we are working in 64k mode. Otherwise we are not.
+	 */
+	if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.berasesz != 3)
+			nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
+	}
+
 	nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
 
 	/* Clear shadow ram */
@@ -446,6 +461,95 @@
 	return 0;
 }
 
+/**
+ *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = 0;
+		goto out;
+	}
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                   E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                   E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg) {
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	e1000e_config_collision_dist(hw);
+
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+	return ret_val;
+}
+
 static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -694,6 +798,38 @@
 }
 
 /**
+ *  e1000_lan_init_done_ich8lan - Check for PHY config completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check the appropriate indication the MAC has finished configuring the
+ *  PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+	/* Wait for basic configuration completes before proceeding */
+	do {
+		data = er32(STATUS);
+		data &= E1000_STATUS_LAN_INIT_DONE;
+		udelay(100);
+	} while ((!data) && --loop);
+
+	/*
+	 * If basic configuration is incomplete before the above loop
+	 * count reaches 0, loading the configuration from NVM will
+	 * leave the PHY in a bad state possibly resulting in no link.
+	 */
+	if (loop == 0)
+		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+	/* Clear the Init Done bit for the next init event */
+	data = er32(STATUS);
+	data &= ~E1000_STATUS_LAN_INIT_DONE;
+	ew32(STATUS, data);
+}
+
+/**
  *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -707,13 +843,15 @@
 	u32 i;
 	u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
 	s32 ret_val;
-	u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
 		return ret_val;
 
+	/* Allow time for h/w to get to a quiescent state after reset */
+	mdelay(10);
+
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
@@ -741,26 +879,8 @@
 		if (!(data & sw_cfg_mask))
 			return 0;
 
-		/* Wait for basic configuration completes before proceeding*/
-		do {
-			data = er32(STATUS);
-			data &= E1000_STATUS_LAN_INIT_DONE;
-			udelay(100);
-		} while ((!data) && --loop);
-
-		/*
-		 * If basic configuration is incomplete before the above loop
-		 * count reaches 0, loading the configuration from NVM will
-		 * leave the PHY in a bad state possibly resulting in no link.
-		 */
-		if (loop == 0) {
-			hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
-		}
-
-		/* Clear the Init Done bit for the next init event */
-		data = er32(STATUS);
-		data &= ~E1000_STATUS_LAN_INIT_DONE;
-		ew32(STATUS, data);
+		/* Wait for basic configuration completes before proceeding */
+		e1000_lan_init_done_ich8lan(hw);
 
 		/*
 		 * Make sure HW does not configure LCD from PHY
@@ -961,12 +1081,14 @@
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1101,9 @@
 		phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1038,6 +1163,10 @@
 	if (!active) {
 		phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1073,12 +1202,14 @@
 		phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1905,7 +2036,7 @@
 		break;
 	case 1:
 		sector_size = ICH_FLASH_SEG_SIZE_4K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+		iteration = 1;
 		break;
 	case 2:
 		if (hw->mac.type == e1000_ich9lan) {
@@ -1917,7 +2048,7 @@
 		break;
 	case 3:
 		sector_size = ICH_FLASH_SEG_SIZE_64K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+		iteration = 1;
 		break;
 	default:
 		return -E1000_ERR_NVM;
@@ -2143,6 +2274,12 @@
 	ctrl = er32(CTRL);
 
 	if (!e1000_check_reset_block(hw)) {
+		/* Clear PHY Reset Asserted bit */
+		if (hw->mac.type >= e1000_pchlan) {
+			u32 status = er32(STATUS);
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		}
+
 		/*
 		 * PHY HW reset requires MAC CORE reset at the same
 		 * time to make sure the interface between MAC and the
@@ -2156,22 +2293,33 @@
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	if (!ret_val) {
-		/* release the swflag because it is not reset by
-		 * hardware reset
-		 */
+	if (!ret_val)
 		e1000_release_swflag_ich8lan(hw);
+
+	if (ctrl & E1000_CTRL_PHY_RST)
+		ret_val = hw->phy.ops.get_cfg_done(hw);
+
+	if (hw->mac.type >= e1000_ich10lan) {
+		e1000_lan_init_done_ich8lan(hw);
+	} else {
+		ret_val = e1000e_get_auto_rd_done(hw);
+		if (ret_val) {
+			/*
+			 * When auto config read does not complete, do not
+			 * return with an error. This can happen in situations
+			 * where there is no eeprom and prevents getting link.
+			 */
+			hw_dbg(hw, "Auto Read Done did not complete\n");
+		}
 	}
 
-	ret_val = e1000e_get_auto_rd_done(hw);
-	if (ret_val) {
-		/*
-		 * When auto config read does not complete, do not
-		 * return with an error. This can happen in situations
-		 * where there is no eeprom and prevents getting link.
-		 */
-		hw_dbg(hw, "Auto Read Done did not complete\n");
-	}
+	/*
+	 * For PCH, this write will make sure that any noise
+	 * will be detected as a CRC error and be dropped rather than show up
+	 * as a bad packet to the DMA engine.
+	 */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(CRC_OFFSET, 0x65656565);
 
 	ew32(IMC, 0xffffffff);
 	icr = er32(ICR);
@@ -2222,6 +2370,18 @@
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
+	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+		ret_val = e1000_phy_hw_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Setup link and flow control */
 	ret_val = e1000_setup_link_ich8lan(hw);
 
@@ -2254,16 +2414,6 @@
 	ew32(CTRL_EXT, ctrl_ext);
 
 	/*
-	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
-	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
-	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
-	 */
-	if (hw->phy.type == e1000_phy_82578) {
-		e1e_rphy(hw, BM_WUC, &i);
-		e1000e_phy_hw_reset_generic(hw);
-	}
-
-	/*
 	 * Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
@@ -2485,6 +2635,14 @@
 	if (ret_val)
 		return ret_val;
 
+	if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                  E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                  E1000_KMRNCTRLSTA_K1_DISABLE);
+		if (ret_val)
+			return ret_val;
+	}
+
 	if ((hw->mac.type == e1000_ich8lan) &&
 	    (hw->phy.type == e1000_phy_igp_3) &&
 	    (*speed == SPEED_1000)) {
@@ -2850,6 +3008,16 @@
 {
 	u32 bank = 0;
 
+	if (hw->mac.type >= e1000_pchlan) {
+		u32 status = er32(STATUS);
+
+		if (status & E1000_STATUS_PHYRA)
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		else
+			hw_dbg(hw,
+			       "PHY Reset Asserted not set - needs delay\n");
+	}
+
 	e1000e_get_cfg_done(hw);
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3089,7 @@
 static struct e1000_mac_operations ich8_mac_ops = {
 	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
-	.check_for_link		= e1000e_check_for_copper_link,
+	.check_for_link		= e1000_check_for_copper_link_ich8lan,
 	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e9..99ba2b8 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@
 
 	mac->get_link_status = 0;
 
-	if (hw->phy.type == e1000_phy_82578) {
-		ret_val = e1000_link_stall_workaround_hv(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
 	/*
 	 * Check if there was DownShift, must be checked
 	 * immediately after link-up
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459c..994401f 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@
 		 */
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
-			break;
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
 			break;
@@ -2737,6 +2742,11 @@
 	if (hw->phy.type != e1000_phy_82578)
 		goto out;
 
+	/* Do not apply workaround if in PHY loopback bit 14 set */
+	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	if (data & PHY_CONTROL_LB)
+		goto out;
+
 	/* check if link is up and at 1Gbps */
 	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index b60e27d..88d7ebf 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -338,8 +338,7 @@
 #ifndef MODULE
 	static int printed_version;
 	if (!printed_version++)
-		printk (KERN_INFO "%s" KERN_INFO "%s",
-			version, version2);
+		printk(KERN_INFO "%s%s", version, version2);
 #endif
 
 	card_idx++;
@@ -1600,7 +1599,7 @@
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk (KERN_INFO "%s" KERN_INFO "%s",
+	printk (KERN_INFO "%s%s",
 		version, version2);
 #endif
 
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 891be28..48385c4 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1209,17 +1209,20 @@
 	unsigned long flags;
 	int i;
 
-	printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
-	       " resetting...\n", dev->name, ioread32(ioaddr + ISR));
+	printk(KERN_WARNING
+	       "%s: Transmit timed out, status %8.8x, resetting...\n",
+	       dev->name, ioread32(ioaddr + ISR));
 
 	{
 		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
-		printk("\n" KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       (unsigned int) np->rx_ring[i].status);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x", np->tx_ring[i].status);
-		printk("\n");
+			printk(KERN_CONT " %4.4x", np->tx_ring[i].status);
+		printk(KERN_CONT "\n");
 	}
 
 	spin_lock_irqsave(&np->lock, flags);
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 30b7dd6..cc47f3f 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -46,12 +46,12 @@
 
 #else
 
-#define FEC_ECNTRL;		0x000 /* Ethernet control reg */
-#define FEC_IEVENT;		0x004 /* Interrupt even reg */
-#define FEC_IMASK;		0x008 /* Interrupt mask reg */
-#define FEC_IVEC;		0x00c /* Interrupt vec status reg */
-#define FEC_R_DES_ACTIVE;	0x010 /* Receive descriptor reg */
-#define FEC_X_DES_ACTIVE;	0x01c /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x000 /* Ethernet control reg */
+#define FEC_IEVENT		0x004 /* Interrupt even reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_IVEC		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
 #define FEC_MII_DATA		0x040 /* MII manage frame reg */
 #define FEC_MII_SPEED		0x044 /* MII speed control reg */
 #define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d29..3b4e076 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 
 #else
 	do
@@ -3615,12 +3617,13 @@
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
-
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 #else
 	do
 	{
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 9d5b62c..d62378c 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -173,8 +173,8 @@
 
 static const char version[] __devinitconst =
 KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE "  Written by Donald Becker\n"
-KERN_INFO "   Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
-KERN_INFO "   Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
+"   Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
+"   Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
 
 
 /* IP_MF appears to be only defined in <netinet/ip.h>, however,
@@ -1080,11 +1080,14 @@
 	{
 		printk(KERN_DEBUG "  Rx ring %p: ", hmp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
-		printk("\n"KERN_DEBUG"  Tx ring %p: ", hmp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       le32_to_cpu(hmp->rx_ring[i].status_n_length));
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG"  Tx ring %p: ", hmp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
-		printk("\n");
+			printk(KERN_CONT " %4.4x",
+			       le32_to_cpu(hmp->tx_ring[i].status_n_length));
+		printk(KERN_CONT "\n");
 	}
 
 	/* Reinit the hardware and make sure the Rx and Tx processes
@@ -1753,13 +1756,13 @@
 
 #ifdef __i386__
 	if (hamachi_debug > 2) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+		printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
 			   (int)hmp->tx_ring_dma);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %c #%d desc. %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
 				   readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
 				   i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)hmp->rx_ring_dma);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
@@ -1770,7 +1773,7 @@
 					u16 *addr = (u16 *)
 						hmp->rx_skbuff[i]->data;
 					int j;
-
+					printk(KERN_DEBUG "Addr: ");
 					for (j = 0; j < 0x50; j++)
 						printk(" %4.4x", addr[j]);
 					printk("\n");
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 5e4b7af..3527032 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -68,7 +68,7 @@
 
 static const char bc_drvname[] = "baycom_epp";
 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 2e6fc4d..5f5af9a 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -102,7 +102,7 @@
 
 static const char bc_drvname[] = "baycom_par";
 static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index b6a816e..aa4488e 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -91,7 +91,7 @@
 
 static const char bc_drvname[] = "baycom_ser_fdx";
 static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 3bcc57a..88c5935 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -79,7 +79,7 @@
 
 static const char bc_drvname[] = "baycom_ser_hdx";
 static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
 
 /* --------------------------------------------------------------------- */
 
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index efd9be2..ac28dd5 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -190,6 +190,10 @@
 		phy->ops.write_reg          = igb_write_phy_reg_igp;
 	}
 
+	/* set lan id */
+	hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+	               E1000_STATUS_FUNC_SHIFT;
+
 	/* Set phy->phy_addr and phy->id. */
 	ret_val = igb_get_phy_id_82575(hw);
 	if (ret_val)
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index d56890f..7c5978a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -138,6 +138,10 @@
 			adapter->hw.fc.requested_mode = ixgbe_fc_none;
 		}
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+			adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+		}
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
@@ -154,6 +158,8 @@
 			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+			if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 			ixgbe_init_interrupt_scheme(adapter);
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_open(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0f7b6a3..2a97800 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1830,7 +1830,6 @@
 		break;
 	default:
 		wol->supported = 0;
-		retval = 0;
 	}
 
 	return retval;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 5588ef4..e3442f4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2697,19 +2697,23 @@
 
 	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
-	 * arrived before interrupts were enabled.  We need to kick off
-	 * the SFP+ module setup first, then try to bring up link.
+	 * arrived before interrupts were enabled but after probe.  Such
+	 * devices wouldn't have their type identified yet. We need to
+	 * kick off the SFP+ module setup first, then try to bring up link.
 	 * If we're not hot-pluggable SFP+, we just need to configure link
 	 * and bring it up.
 	 */
-	err = hw->phy.ops.identify(hw);
-	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to initialize because "
-			"an unsupported SFP+ module type was detected.\n"
-			"Reload the driver after installing a supported "
-			"module.\n");
-		ixgbe_down(adapter);
-		return err;
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		err = hw->phy.ops.identify(hw);
+		if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+			/*
+			 * Take the device down and schedule the sfp tasklet
+			 * which will unregister_netdev and log it.
+			 */
+			ixgbe_down(adapter);
+			schedule_work(&adapter->sfp_config_module_task);
+			return err;
+		}
 	}
 
 	if (ixgbe_is_sfp(hw)) {
@@ -3126,7 +3130,11 @@
 #endif
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 			DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
-			ixgbe_set_rss_queues(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_set_fdir_queues(adapter);
+			else
+				ixgbe_set_rss_queues(adapter);
 		}
 		/* adding FCoE rx rings to the end */
 		f->mask = adapter->num_rx_queues;
@@ -3384,7 +3392,12 @@
 		}
 #endif /* CONFIG_IXGBE_DCB */
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			ixgbe_cache_ring_rss(adapter);
+			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+				ixgbe_cache_ring_fdir(adapter);
+			else
+				ixgbe_cache_ring_rss(adapter);
+
 			fcoe_i = f->mask;
 		}
 		for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -3724,7 +3737,7 @@
 	if ((hw->phy.type == ixgbe_phy_nl) &&
 	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
 		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret)
+		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
@@ -4534,13 +4547,17 @@
 	u32 err;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+	/* Time for electrical oscillations to settle down */
+	msleep(100);
 	err = hw->phy.ops.identify_sfp(hw);
+
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
 		dev_err(&adapter->pdev->dev, "failed to initialize because "
 			"an unsupported SFP+ module type was detected.\n"
 			"Reload the driver after installing a supported "
 			"module.\n");
-		ixgbe_down(adapter);
+		unregister_netdev(adapter->netdev);
 		return;
 	}
 	hw->mac.ops.setup_sfp(hw);
@@ -5570,12 +5587,6 @@
 				netdev->features |= NETIF_F_FCOE_CRC;
 				netdev->features |= NETIF_F_FSO;
 				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-				DPRINTK(DRV, INFO, "FCoE enabled, "
-					"disabling Flow Director\n");
-				adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
-				adapter->flags &=
-				        ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-				adapter->atr_sample_rate = 0;
 			} else {
 				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
 			}
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966..9ecad17 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
@@ -68,6 +69,8 @@
 				break;
 			}
 		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
 	} else {
 		status = 0;
 	}
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c9bfe4e..78c0883 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -130,8 +130,8 @@
 static const char version[] __devinitconst =
   KERN_INFO DRV_NAME " dp8381x driver, version "
       DRV_VERSION ", " DRV_RELDATE "\n"
-  KERN_INFO "  originally by Donald Becker <becker@scyld.com>\n"
-  KERN_INFO "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+  "  originally by Donald Becker <becker@scyld.com>\n"
+  "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 5c3e242..992dbff 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -321,7 +321,7 @@
 	}
 
 	if (ei_debug  &&  version_printed++ == 0)
-		printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+		printk(KERN_INFO "%s%s", version1, version2);
 
 	printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cede..e1cdba7 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
 #define _NETXEN_NIC_LINUX_SUBVERSION 30
 #define NETXEN_NIC_LINUX_VERSIONID  "4.0.30"
 
-#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
+#define _major(v)	(((v) >> 24) & 0xff)
+#define _minor(v)	(((v) >> 16) & 0xff)
+#define _build(v)	((v) & 0xffff)
+
+/* version in image has weird encoding:
+ *  7:0  - major
+ * 15:8  - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+	NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
 
 #define NETXEN_NUM_FLASH_SECTORS (64)
 #define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -614,6 +625,7 @@
 #define NX_P2_MN_ROMIMAGE	0
 #define NX_P3_CT_ROMIMAGE	1
 #define NX_P3_MN_ROMIMAGE	2
+#define NX_FLASH_ROMIMAGE	3
 
 #define NETXEN_USER_START_OLD NETXEN_PXE_START	/* for backward compatibility */
 
@@ -1243,7 +1255,7 @@
 	u32 resv3;
 
 	u8 has_link_events;
-	u8 resv1;
+	u8 fw_type;
 	u16 tx_context_id;
 	u16 mtu;
 	u16 is_up;
@@ -1387,6 +1399,7 @@
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
 int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc0478..8241036 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@
 #define NX_PEG_TUNE_CAPABILITY		(NETXEN_CAM_RAM(0x02c))
 
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
+#define NETXEN_PEG_ALIVE_COUNTER	(NETXEN_CAM_RAM(0xb0))
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
 #define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61..b899bd5 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -684,11 +684,84 @@
 }
 
 int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+	u32 count, old_count;
+	u32 val, version, major, minor, build;
+	int i, timeout;
+	u8 fw_type;
+
+	/* NX2031 firmware doesn't support heartbit */
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		return 1;
+
+	/* last attempt had failed */
+	if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+		return 1;
+
+	old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+	for (i = 0; i < 10; i++) {
+
+		timeout = msleep_interruptible(200);
+		if (timeout) {
+			NXWR32(adapter, CRB_CMDPEG_STATE,
+					PHAN_INITIALIZE_FAILED);
+			return -EINTR;
+		}
+
+		count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+		if (count != old_count)
+			break;
+	}
+
+	/* firmware is dead */
+	if (count == old_count)
+		return 1;
+
+	/* check if we have got newer or different file firmware */
+	if (adapter->fw) {
+
+		const struct firmware *fw = adapter->fw;
+
+		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+		version = NETXEN_DECODE_VERSION(val);
+
+		major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+		minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+		build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+		if (version > NETXEN_VERSION_CODE(major, minor, build))
+			return 1;
+
+		if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+			val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+			fw_type = (val & 0x4) ?
+				NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+			if (adapter->fw_type != fw_type)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+static char *fw_name[] = {
+	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
 netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	u64 *ptr64;
 	u32 i, flashaddr, size;
 	const struct firmware *fw = adapter->fw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	dev_info(&pdev->dev, "loading firmware from %s\n",
+			fw_name[adapter->fw_type]);
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +829,7 @@
 netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 {
 	__le32 val;
-	u32 major, minor, build, ver, min_ver, bios;
+	u32 ver, min_ver, bios;
 	struct pci_dev *pdev = adapter->pdev;
 	const struct firmware *fw = adapter->fw;
 
@@ -768,21 +841,18 @@
 		return -EINVAL;
 
 	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
 	else
 		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
 
-	ver = NETXEN_VERSION_CODE(major, minor, build);
+	ver = NETXEN_DECODE_VERSION(val);
 
-	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+	if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
 		dev_err(&pdev->dev,
 				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, major, minor, build);
+				fwname, _major(ver), _minor(ver), _build(ver));
 		return -EINVAL;
 	}
 
@@ -798,22 +868,21 @@
 	if (netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&val))
 		return -EIO;
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+	val = NETXEN_DECODE_VERSION(val);
+	if (val > ver) {
+		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+				fwname);
 		return -EINVAL;
+	}
 
 	NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 	return 0;
 }
 
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
 void netxen_request_firmware(struct netxen_adapter *adapter)
 {
 	u32 capability, flashed_ver;
-	int fw_type;
+	u8 fw_type;
 	struct pci_dev *pdev = adapter->pdev;
 	int rc = 0;
 
@@ -830,6 +899,8 @@
 
 	netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
 	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
 		capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
 		if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +909,10 @@
 		}
 	}
 
+	fw_type = NX_FLASH_ROMIMAGE;
+	adapter->fw = NULL;
+	goto done;
+
 request_fw:
 	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
 	if (rc != 0) {
@@ -846,6 +921,7 @@
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
@@ -859,16 +935,13 @@
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
 
 done:
-	if (adapter->fw)
-		dev_info(&pdev->dev, "loading firmware from file %s\n",
-				fw_name[fw_type]);
-	else
-		dev_info(&pdev->dev, "loading firmware from flash\n");
+	adapter->fw_type = fw_type;
 }
 
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d..27539dd 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -718,6 +718,10 @@
 	if (request_fw)
 		netxen_request_firmware(adapter);
 
+	err = netxen_need_fw_reset(adapter);
+	if (err <= 0)
+		return err;
+
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
 		netxen_pinit_from_rom(adapter, 0);
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8c1f698..89f7b2a 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -105,7 +105,7 @@
 
 static char version[] __devinitdata =
 KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-KERN_INFO "  Support available from http://foo.com/bar/baz.html\n";
+"  Support available from http://foo.com/bar/baz.html\n";
 
 /* define to 1 to enable PIO instead of MMIO */
 #undef USE_IO_OPS
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index f51944b..06618af 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -298,14 +298,11 @@
 
     strcpy(info->node.dev_name, dev->name);
 
-    printk(KERN_INFO "%s: port %#3lx, irq %d,",
-           dev->name, dev->base_addr, dev->irq);
-    printk (" mmio %#5lx,", (u_long)ti->mmio);
-    printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
-    printk ("\n" KERN_INFO "  hwaddr=");
-    for (i = 0; i < TR_ALEN; i++)
-        printk("%02X", dev->dev_addr[i]);
-    printk("\n");
+    printk(KERN_INFO
+	   "%s: port %#3lx, irq %d,  mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+           dev->name, dev->base_addr, dev->irq,
+	   (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+	   dev->dev_addr);
     return 0;
 
 cs_failed:
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 02ef63e..36de91b 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1425,15 +1425,12 @@
   ladrf[byte] |= (1 << (hashcode & 7));
 
 #ifdef PCMCIA_DEBUG
-  if (pc_debug > 2) {
-    printk(KERN_DEBUG "    adr =");
-    for (i = 0; i < 6; i++)
-      printk(" %02X", adr[i]);
-    printk("\n" KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63]"
-	   " =", hashcode);
-    for (i = 0; i < 8; i++)
-      printk(" %02X", ladrf[i]);
-    printk("\n");
+  if (pc_debug > 2)
+    printk(KERN_DEBUG "    adr =%pM\n", adr);
+  printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
+  for (i = 0; i < 8; i++)
+    printk(KERN_CONT " %02X", ladrf[i]);
+  printk(KERN_CONT "\n");
   }
 #endif
 } /* BuildLAF */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a368..9ef1c1b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
 	PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
 	PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
 	PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
 	PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 1c35e1d..2836815 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -485,7 +485,7 @@
 					   &new_ring_dma_addr);
 	if (new_tx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Consistent memory allocation failed.\n",
 			       dev->name);
 		return;
@@ -496,7 +496,7 @@
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_tx_ring;
 	}
@@ -505,7 +505,7 @@
 				GFP_ATOMIC);
 	if (!new_skb_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_lists;
 	}
@@ -563,7 +563,7 @@
 					   &new_ring_dma_addr);
 	if (new_rx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Consistent memory allocation failed.\n",
 			       dev->name);
 		return;
@@ -574,7 +574,7 @@
 				GFP_ATOMIC);
 	if (!new_dma_addr_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_rx_ring;
 	}
@@ -583,7 +583,7 @@
 				GFP_ATOMIC);
 	if (!new_skb_list) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR
+			printk(KERN_ERR
 			       "%s: Memory allocation failed.\n", dev->name);
 		goto free_new_lists;
 	}
@@ -1766,38 +1766,38 @@
 		/* Version 0x2623 and 0x2624 */
 		if (((chip_version + 1) & 0xfffe) == 0x2624) {
 			i = a->read_csr(ioaddr, 80) & 0x0C00;	/* Check tx_start_pt */
-			printk("\n" KERN_INFO "    tx_start_pt(0x%04x):", i);
+			printk(KERN_INFO "    tx_start_pt(0x%04x):", i);
 			switch (i >> 10) {
 			case 0:
-				printk("  20 bytes,");
+				printk(KERN_CONT "  20 bytes,");
 				break;
 			case 1:
-				printk("  64 bytes,");
+				printk(KERN_CONT "  64 bytes,");
 				break;
 			case 2:
-				printk(" 128 bytes,");
+				printk(KERN_CONT " 128 bytes,");
 				break;
 			case 3:
-				printk("~220 bytes,");
+				printk(KERN_CONT "~220 bytes,");
 				break;
 			}
 			i = a->read_bcr(ioaddr, 18);	/* Check Burst/Bus control */
-			printk(" BCR18(%x):", i & 0xffff);
+			printk(KERN_CONT " BCR18(%x):", i & 0xffff);
 			if (i & (1 << 5))
-				printk("BurstWrEn ");
+				printk(KERN_CONT "BurstWrEn ");
 			if (i & (1 << 6))
-				printk("BurstRdEn ");
+				printk(KERN_CONT "BurstRdEn ");
 			if (i & (1 << 7))
-				printk("DWordIO ");
+				printk(KERN_CONT "DWordIO ");
 			if (i & (1 << 11))
-				printk("NoUFlow ");
+				printk(KERN_CONT "NoUFlow ");
 			i = a->read_bcr(ioaddr, 25);
-			printk("\n" KERN_INFO "    SRAMSIZE=0x%04x,", i << 8);
+			printk(KERN_INFO "    SRAMSIZE=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 26);
-			printk(" SRAM_BND=0x%04x,", i << 8);
+			printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
 			i = a->read_bcr(ioaddr, 27);
 			if (i & (1 << 14))
-				printk("LowLatRx");
+				printk(KERN_CONT "LowLatRx");
 		}
 	}
 
@@ -1996,7 +1996,7 @@
 					   &lp->tx_ring_dma_addr);
 	if (lp->tx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Consistent memory allocation failed.\n",
 			       name);
 		return -ENOMEM;
@@ -2008,7 +2008,7 @@
 					   &lp->rx_ring_dma_addr);
 	if (lp->rx_ring == NULL) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Consistent memory allocation failed.\n",
 			       name);
 		return -ENOMEM;
@@ -2018,7 +2018,7 @@
 				  GFP_ATOMIC);
 	if (!lp->tx_dma_addr) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2027,7 +2027,7 @@
 				  GFP_ATOMIC);
 	if (!lp->rx_dma_addr) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2036,7 +2036,7 @@
 				GFP_ATOMIC);
 	if (!lp->tx_skbuff) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
@@ -2045,7 +2045,7 @@
 				GFP_ATOMIC);
 	if (!lp->rx_skbuff) {
 		if (netif_msg_drv(lp))
-			printk("\n" KERN_ERR PFX
+			printk(KERN_ERR PFX
 			       "%s: Memory allocation failed.\n", name);
 		return -ENOMEM;
 	}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cb..eda94fc 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@
 				 * Otherwise, it's 0, and we're
 				 * still waiting for AN */
 				if (err > 0) {
-					phydev->state = PHY_RUNNING;
+					err = phy_read_status(phydev);
+					if (err)
+						break;
+
+					if (phydev->link) {
+						phydev->state = PHY_RUNNING;
+						netif_carrier_on(phydev->attached_dev);
+					} else
+						phydev->state = PHY_NOLINK;
+					phydev->adjust_link(phydev->attached_dev);
 				} else {
 					phydev->state = PHY_AN;
 					phydev->link_timeout = PHY_AN_TIMEOUT;
 				}
-			} else
-				phydev->state = PHY_RUNNING;
+			} else {
+				err = phy_read_status(phydev);
+				if (err)
+					break;
+
+				if (phydev->link) {
+					phydev->state = PHY_RUNNING;
+					netif_carrier_on(phydev->attached_dev);
+				} else
+					phydev->state = PHY_NOLINK;
+				phydev->adjust_link(phydev->attached_dev);
+			}
 			break;
 	}
 
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e..6ed5317 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe..eb6a9ee 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->tx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->rx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76..5768af1 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@
 		return -ENOMEM;
 	}
 
+	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+	if (status)
+		return status;
+
 	status = ql_wait_cfg(qdev, bit);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@
 		goto exit;
 	}
 
-	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
-	if (status)
-		goto exit;
 	ql_write32(qdev, ICB_L, (u32) map);
 	ql_write32(qdev, ICB_H, (u32) (map >> 32));
-	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 
 	mask = CFG_Q_MASK | (bit << 16);
 	value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@
 	 */
 	status = ql_wait_cfg(qdev, bit);
 exit:
+	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 	pci_unmap_single(qdev->pdev, map, size, direction);
 	return status;
 }
@@ -412,6 +413,57 @@
 	return status;
 }
 
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+	int status;
+	char zero_mac_addr[ETH_ALEN];
+	char *addr;
+
+	if (set) {
+		addr = &qdev->ndev->dev_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+			"Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+			addr[0], addr[1], addr[2], addr[3],
+			addr[4], addr[5]);
+	} else {
+		memset(zero_mac_addr, 0, ETH_ALEN);
+		addr = &zero_mac_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+				"Clearing MAC address on %s\n",
+				qdev->ndev->name);
+	}
+	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+	status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+			"address.\n");
+	return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+				 qdev->ndev->name);
+	netif_carrier_on(qdev->ndev);
+	ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+				 qdev->ndev->name);
+	netif_carrier_off(qdev->ndev);
+	ql_set_mac_addr(qdev, 0);
+}
+
 /* Get a specific frame routing value from the CAM.
  * Used for debug and reg dump.
  */
@@ -1628,7 +1680,7 @@
 	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
 	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
 	ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
-	qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+	qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
 	qdev->stats.tx_packets++;
 	dev_kfree_skb(tx_ring_desc->skb);
 	tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@
 /* Fire up a handler to reset the MPI processor. */
 void ql_queue_fw_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
 }
 
 void ql_queue_asic_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	ql_disable_interrupts(qdev);
 	/* Clear adapter up bit to signal the recovery
 	 * process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@
 	}
 	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
 	mac_iocb_ptr = tx_ring_desc->queue_entry;
-	memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+	memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
 
 	mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
 	mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@
 
 	ql_init_tx_ring(qdev, tx_ring);
 
-	err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+	err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
 			   (u16) tx_ring->wq_id);
 	if (err) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@
 	int i;
 	u8 *hash_id = (u8 *) ricb->hash_cq_id;
 
-	memset((void *)ricb, 0, sizeof(ricb));
+	memset((void *)ricb, 0, sizeof(*ricb));
 
 	ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
 	ricb->flags =
@@ -3030,7 +3082,7 @@
 
 	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
 
-	status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+	status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
 		return status;
@@ -3039,25 +3091,40 @@
 	return status;
 }
 
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
+{
+	int i, status = 0;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+	/* Clear all the entries in the routing table. */
+	for (i = 0; i < 16; i++) {
+		status = ql_set_routing_reg(qdev, i, 0, 0);
+		if (status) {
+			QPRINTK(qdev, IFUP, ERR,
+				"Failed to init routing register for CAM "
+				"packets.\n");
+			break;
+		}
+	}
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
 /* Initialize the frame-to-queue routing. */
 static int ql_route_initialize(struct ql_adapter *qdev)
 {
 	int status = 0;
-	int i;
 
 	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
 	if (status)
 		return status;
 
 	/* Clear all the entries in the routing table. */
-	for (i = 0; i < 16; i++) {
-		status = ql_set_routing_reg(qdev, i, 0, 0);
-		if (status) {
-			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init routing register for CAM packets.\n");
-			goto exit;
-		}
-	}
+	status = ql_clear_routing_entries(qdev);
+	if (status)
+		goto exit;
 
 	status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
 	if (status) {
@@ -3096,14 +3163,15 @@
 
 int ql_cam_route_initialize(struct ql_adapter *qdev)
 {
-	int status;
+	int status, set;
 
-	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
-	if (status)
-		return status;
-	status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
-			     MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
-	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	/* If check if the link is up and use to
+	 * determine if we are setting or clearing
+	 * the MAC address in the CAM.
+	 */
+	set = ql_read32(qdev, STS);
+	set &= qdev->port_link_up;
+	status = ql_set_mac_addr(qdev, set);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
 		return status;
@@ -3210,9 +3278,17 @@
 {
 	u32 value;
 	int status = 0;
-	unsigned long end_jiffies = jiffies +
-		max((unsigned long)1, usecs_to_jiffies(30));
+	unsigned long end_jiffies;
 
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+		return status;
+	}
+
+	end_jiffies = jiffies +
+		max((unsigned long)1, usecs_to_jiffies(30));
 	ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
 
 	do {
@@ -3252,7 +3328,7 @@
 	int i, status = 0;
 	struct rx_ring *rx_ring;
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 
 	/* Don't kill the reset worker thread if we
 	 * are in the process of recovery.
@@ -3319,8 +3395,12 @@
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	ql_alloc_rx_buffers(qdev);
-	if ((ql_read32(qdev, STS) & qdev->port_init))
-		netif_carrier_on(qdev->ndev);
+	/* If the port is initialized and the
+	 * link is up the turn on the carrier.
+	 */
+	if ((ql_read32(qdev, STS) & qdev->port_init) &&
+			(ql_read32(qdev, STS) & qdev->port_link_up))
+		ql_link_on(qdev);
 	ql_enable_interrupts(qdev);
 	ql_enable_all_completion_interrupts(qdev);
 	netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@
 		return -ENOMEM;
 	}
 	status = ql_request_irq(qdev);
-	if (status)
-		goto err_irq;
-	return status;
-err_irq:
-	ql_free_mem_resources(qdev);
 	return status;
 }
 
@@ -3414,7 +3489,7 @@
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
-		memset((void *)tx_ring, 0, sizeof(tx_ring));
+		memset((void *)tx_ring, 0, sizeof(*tx_ring));
 		tx_ring->qdev = qdev;
 		tx_ring->wq_id = i;
 		tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@
 
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		rx_ring = &qdev->rx_ring[i];
-		memset((void *)rx_ring, 0, sizeof(rx_ring));
+		memset((void *)rx_ring, 0, sizeof(*rx_ring));
 		rx_ring->qdev = qdev;
 		rx_ring->cq_id = i;
 		rx_ring->cpu = i % cpu_cnt;	/* CPU to run handler on. */
@@ -3789,7 +3864,7 @@
 	int pos, err = 0;
 	u16 val16;
 
-	memset((void *)qdev, 0, sizeof(qdev));
+	memset((void *)qdev, 0, sizeof(*qdev));
 	err = pci_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@
 		pci_disable_device(pdev);
 		return err;
 	}
-	netif_carrier_off(ndev);
+	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
 	cards_found++;
 	return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8..6685bd9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@
 				&qdev->mpi_port_cfg_work, 0);
 	}
 
-	netif_carrier_on(qdev->ndev);
+	ql_link_on(qdev);
 }
 
 static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@
 	if (status)
 		QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 }
 
 static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@
 	case MB_CMD_PORT_RESET:
 	case MB_CMD_SET_PORT_CFG:
 	case MB_CMD_STOP_FW:
-		netif_carrier_off(qdev->ndev);
+		ql_link_off(qdev);
 		/* Signal the resulting link up AEN
 		 * that the frame routing and mac addr
 		 * needs to be set.
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index ed63d23..961b539 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.23"
-#define DRV_RELDATE	"05May2009"
+#define DRV_VERSION	"0.24"
+#define DRV_RELDATE	"08Jul2009"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
@@ -704,8 +704,11 @@
 	/* Read MISR status and clear */
 	status = ioread16(ioaddr + MISR);
 
-	if (status == 0x0000 || status == 0xffff)
+	if (status == 0x0000 || status == 0xffff) {
+		/* Restore RDC MAC interrupt */
+		iowrite16(misr, ioaddr + MIER);
 		return IRQ_NONE;
+	}
 
 	/* RX interrupt request */
 	if (status & RX_INTS) {
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639b..66067f9 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1938,7 +1938,7 @@
 	if (!res)
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 
 	iounmap(pdata->ioaddr);
 
@@ -1976,7 +1976,7 @@
 		retval = -ENODEV;
 		goto out_0;
 	}
-	res_size = res->end - res->start + 1;
+	res_size = resource_size(res);
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
@@ -2104,7 +2104,7 @@
 out_free_netdev_2:
 	free_netdev(dev);
 out_release_io_1:
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 out_0:
 	return retval;
 }
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 838cce8..669253c 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -180,7 +180,7 @@
 /* These identify the driver base version and may not be removed. */
 static const char version[] __devinitconst =
 KERN_INFO "starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 545f81b..d1521c3 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1698,13 +1698,13 @@
 
 #ifdef __i386__
 	if (netif_msg_hw(np)) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+		printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
 			   (int)(np->tx_ring_dma));
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
 				   i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
 				   np->tx_ring[i].frag[0].length);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)(np->rx_ring_dma));
 		for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 0f78f99..7030bd5 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1132,7 +1132,9 @@
 	}
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
+		printk(KERN_ERR
+		       "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
+		       dev->name, word1, word2);
 		return -EINVAL;
 	}
 
@@ -1201,8 +1203,8 @@
 				__set_bit(hash, &data->mc_hash[0]);
 			} else {
 				printk(KERN_ERR
-				       "%s: got multicast address of length %d "
-				       "instead of 6.\n", dev->name,
+		"%s: got multicast address of length %d instead of 6.\n",
+				       dev->name,
 				       mc->dmi_addrlen);
 			}
 
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 81f054d..ef49744 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -944,9 +944,10 @@
 		macmode &= ~FullDuplex;
 
 	if (netif_msg_link(de)) {
-		printk(KERN_INFO "%s: set link %s\n"
-		       KERN_INFO "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
-		       KERN_INFO "%s:    set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+		printk(KERN_INFO
+		       "%s: set link %s\n"
+		       "%s:    mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
+		       "%s:    set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
 		       de->dev->name, media_name[media],
 		       de->dev->name, dr32(MacMode), dr32(SIAStatus),
 		       dr32(CSR13), dr32(CSR14), dr32(CSR15),
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2abb5d3..99a6364 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -570,16 +570,18 @@
 				   (unsigned int)tp->rx_ring[i].buffer2,
 				   buf[0], buf[1], buf[2]);
 			for (j = 0; buf[j] != 0xee && j < 1600; j++)
-				if (j < 100) printk(" %2.2x", buf[j]);
-			printk(" j=%d.\n", j);
+				if (j < 100)
+					printk(KERN_CONT " %2.2x", buf[j]);
+			printk(KERN_CONT " j=%d.\n", j);
 		}
 		printk(KERN_DEBUG "  Rx ring %8.8x: ", (int)tp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
-		printk("\n" KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       (unsigned int)tp->rx_ring[i].status);
+		printk(KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
-		printk("\n");
+			printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
+		printk(KERN_CONT "\n");
 	}
 #endif
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 842b1a2..0f15773 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -142,7 +142,7 @@
 static const char version[] __initconst =
 	KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
 	DRV_RELDATE "  Donald Becker <becker@scyld.com>\n"
-	KERN_INFO "  http://www.scyld.com/network/drivers.html\n";
+	"  http://www.scyld.com/network/drivers.html\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
@@ -939,7 +939,7 @@
 		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
 			printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
-		printk("\n"KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
+		printk(KERN_DEBUG"  Tx ring %p: ", np->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
 			printk(" %8.8x", np->tx_ring[i].status);
 		printk("\n");
@@ -1520,7 +1520,7 @@
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
 				   i, np->tx_ring[i].length,
 				   np->tx_ring[i].status, np->tx_ring[i].buffer1);
-		printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8x:\n",
 			   (int)np->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba4..027f7ab 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun = __tun_get(tfile);
-	struct sock *sk = tun->sk;
+	struct sock *sk;
 	unsigned int mask = 0;
 
 	if (!tun)
 		return POLLERR;
 
+	sk = tun->sk;
+
 	DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
 
 	poll_wait(file, &tun->socket.wait, wait);
@@ -1324,20 +1326,22 @@
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
 
-
-	rtnl_lock();
 	tun = __tun_get(tfile);
 	if (tun) {
-		DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+		struct net_device *dev = tun->dev;
+
+		DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
 
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
-		if (!(tun->flags & TUN_PERSIST))
-			unregister_netdevice(tun->dev);
-
+		if (!(tun->flags & TUN_PERSIST)) {
+			rtnl_lock();
+			if (dev->reg_state == NETREG_REGISTERED)
+				unregister_netdevice(dev);
+			rtnl_unlock();
+		}
 	}
-	rtnl_unlock();
 
 	tun = tfile->tun;
 	if (tun)
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 223238d..1ea1ef6 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -584,8 +584,9 @@
 	       sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
 	for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
 		printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+	printk(KERN_CONT "\n");
 
-	printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+	printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
 	       "last=%u %sactive",
 	       sca_inw(get_dmac_tx(port) + CDAL, card),
 	       sca_inw(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index 497b003..f099c34 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -529,8 +529,9 @@
 	       sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
 	for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
 		printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+	printk(KERN_CONT "\n");
 
-	printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+	printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
 	       "last=%u %sactive",
 	       sca_inl(get_dmac_tx(port) + CDAL, card),
 	       sca_inl(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 3fb9dbc..d14e95a 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -326,11 +326,9 @@
 		}
 
 		if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
-			printk( KERN_WARNING "  WARNING: The PCI BIOS assigned "
-				"this PCI card to IRQ %d, which is unlikely "
-				"to work!.\n"
-				KERN_WARNING " You should use the PCI BIOS "
-				"setup to assign a valid IRQ line.\n",
+			printk( KERN_WARNING
+	"  WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+	" You should use the PCI BIOS setup to assign a valid IRQ line.\n",
 				pci_irq_line );
 
 		/* avoiding re-enable dual adapters */
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index d26e7b4..eb0337c 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,5 +1,6 @@
 config ATH_COMMON
 	tristate "Atheros Wireless Cards"
+	depends on WLAN_80211
 	depends on ATH5K || ATH9K || AR9170_USB
 
 source "drivers/net/wireless/ath/ath5k/Kconfig"
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b61a071..4ccf48e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -355,7 +355,14 @@
 		}
 
 		if (bf_next == NULL) {
-			INIT_LIST_HEAD(&bf_head);
+			/*
+			 * Make sure the last desc is reclaimed if it
+			 * not a holding desc.
+			 */
+			if (!bf_last->bf_stale)
+				list_move_tail(&bf->list, &bf_head);
+			else
+				INIT_LIST_HEAD(&bf_head);
 		} else {
 			ASSERT(!list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f580c28..4044806 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,6 +648,7 @@
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6456afe..e71c8d9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3497,8 +3497,8 @@
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -4378,6 +4379,7 @@
 	if (b43_status(dev) >= B43_STAT_STARTED)
 		b43_wireless_core_stop(dev);
 	b43_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 
 	cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@
 		B43_WARN_ON(1);
 
 	dev->phy.gmode = have_2ghz_phy;
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
 	b43_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 3cfc303..6c3a749 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -35,6 +35,7 @@
 
 static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
 	PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 77fda14..038baa8 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -607,6 +607,7 @@
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e5136fb..c4973c1 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2689,8 +2689,8 @@
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
 			b43legacyinfo(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -3479,6 +3480,7 @@
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
 		b43legacy_wireless_core_stop(dev);
 	b43legacy_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 }
 
@@ -3620,6 +3622,7 @@
 		have_bphy = 1;
 
 	dev->phy.gmode = (have_gphy || have_bphy);
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
 	b43legacy_wireless_core_reset(dev, tmp);
 
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 1eccb6d..030401d 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -4,6 +4,15 @@
 	depends on CFG80211
 	select WIRELESS_EXT
 	select FW_LOADER
+	help
+	  The Intel Wireless Multicomm 3200 hardware is a combo
+	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
+	  runs over SDIO and is typically found on Moorestown
+	  based platform. This driver takes care of the 802.11
+	  part, which is a fullmac one.
+
+	  If you choose to build it as a module, it'll be called
+	  iwmc3200wifi.ko.
 
 config IWM_DEBUG
 	bool "Enable full debugging output in iwmc3200wifi"
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e789c6e..a111bda 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -418,6 +418,7 @@
 			continue;
 
 		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
 			continue;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd1..22ca122 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@
 	struct p54_tx_info *range;
 	unsigned long flags;
 
-	if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+	if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
 		return;
 
-	/* There used to be a check here to see if the SKB was on the
-	 * TX queue or not.  This can never happen because all SKBs we
-	 * see here successfully went through p54_assign_address()
-	 * which means the SKB is on the ->tx_queue.
+	/*
+	 * don't try to free an already unlinked skb
 	 */
+	if (unlikely((!skb->next) || (!skb->prev)))
+		return;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	info = IEEE80211_SKB_CB(skb);
 	range = (void *)info->rate_driver_data;
-	if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+	if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->prev);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
-	if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+	if (skb->next != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->next);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
 	__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
 		if (hdr->req_id == req_id) {
 			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 			return entry;
 		}
+		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return NULL;
@@ -888,33 +890,36 @@
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = (struct sk_buff *) priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
 		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
-		if (range->start_addr != addr)
+		if (range->start_addr != addr) {
+			entry = entry->next;
 			continue;
+		}
 
-		if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+		if (entry->next != (struct sk_buff *)&priv->tx_queue) {
 			struct ieee80211_tx_info *ni;
 			struct p54_tx_info *mr;
 
-			ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
-							     entry));
+			ni = IEEE80211_SKB_CB(entry->next);
 			mr = (struct p54_tx_info *)ni->rate_driver_data;
 		}
 
 		__skb_unlink(entry, &priv->tx_queue);
-		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
-		priv->tx_stats[entry_data->hw_queue].len--;
+		if (priv->tx_stats[entry_data->hw_queue].len)
+			priv->tx_stats[entry_data->hw_queue].len--;
 		priv->stats.dot11ACKFailureCount += payload->tries - 1;
+		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		/*
 		 * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
@@ -1164,21 +1169,23 @@
 		}
 	}
 
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
 		range = (void *)info->rate_driver_data;
 		hole_size = range->start_addr - last_addr;
 		if (!target_skb && hole_size >= len) {
-			target_skb = skb_queue_prev(&priv->tx_queue, entry);
+			target_skb = entry->prev;
 			hole_size -= len;
 			target_addr = last_addr;
 		}
 		largest_hole = max(largest_hole, hole_size);
 		last_addr = range->end_addr;
+		entry = entry->next;
 	}
 	if (!target_skb && priv->rx_end - last_addr >= len) {
-		target_skb = skb_peek_tail(&priv->tx_queue);
+		target_skb = priv->tx_queue.prev;
 		largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
 		if (!skb_queue_empty(&priv->tx_queue)) {
 			info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2091,7 @@
 static void p54_stop(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
+	struct sk_buff *skb;
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2106,8 @@
 		p54_tx_cancel(dev, priv->cached_beacon);
 
 	priv->stop(dev);
-	skb_queue_purge(&priv->tx_queue);
+	while ((skb = skb_dequeue(&priv->tx_queue)))
+		kfree_skb(skb);
 	priv->cached_beacon = NULL;
 	priv->tsf_high32 = priv->tsf_low32 = 0;
 	mutex_unlock(&priv->conf_mutex);
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b10b038..698b11b 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2427,11 +2427,10 @@
 
 #ifdef PCMCIA_DEBUG
 	if (pc_debug > 3) {
-		int i;
-		printk(KERN_DEBUG "skb->data before untranslate");
-		for (i = 0; i < 64; i++)
-			printk("%02x ", skb->data[i]);
-		printk("\n" KERN_DEBUG
+		print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
+			       DUMP_PREFIX_NONE, 16, 1,
+			       skb->data, 64, true);
+		printk(KERN_DEBUG
 		       "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
 		       ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
 		       psnap->org[0], psnap->org[1], psnap->org[2]);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 6af7064..c6d3006 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3556,17 +3556,8 @@
   cfblk.rcvstop = TRUE; 	/* Enable Receive Stop Register */
 
 #ifdef DEBUG_I82593_SHOW
-  {
-    u_char *c = (u_char *) &cfblk;
-    int i;
-    printk(KERN_DEBUG "wavelan_cs: config block:");
-    for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
-      {
-	if((i % 16) == 0) printk("\n" KERN_DEBUG);
-	printk("%02x ", *c);
-      }
-    printk("\n");
-  }
+  print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+		 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
 #endif
 
   /* Copy the config block to the i82593 */
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 14a19ba..0e6e446 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -38,7 +38,6 @@
 	/* ZD1211 */
 	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
-	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
+	{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 3c7a505..a075801 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -109,7 +109,7 @@
 /* These identify the driver base version and may not be removed. */
 static const char version[] __devinitconst =
   KERN_INFO DRV_NAME ".c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>\n"
-  KERN_INFO "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+  "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
@@ -700,12 +700,15 @@
 		int i;
 		printk(KERN_WARNING "  Rx ring %p: ", yp->rx_ring);
 		for (i = 0; i < RX_RING_SIZE; i++)
-			printk(" %8.8x", yp->rx_ring[i].result_status);
-		printk("\n"KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
+			printk(KERN_CONT " %8.8x",
+			       yp->rx_ring[i].result_status);
+		printk(KERN_CONT "\n");
+		printk(KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
-				   yp->tx_ring[i].result_status);
-		printk("\n");
+			printk(KERN_CONT " %4.4x /%8.8x",
+			       yp->tx_status[i].tx_errs,
+			       yp->tx_ring[i].result_status);
+		printk(KERN_CONT "\n");
 	}
 
 	/* If the hardware is found to hang regularly, we will update the code
@@ -1216,20 +1219,20 @@
 
 #if defined(__i386__)
 	if (yellowfin_debug > 2) {
-		printk("\n"KERN_DEBUG"  Tx ring at %8.8llx:\n",
+		printk(KERN_DEBUG"  Tx ring at %8.8llx:\n",
 				(unsigned long long)yp->tx_ring_dma);
 		for (i = 0; i < TX_RING_SIZE*2; i++)
-			printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
 				   ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
 				   i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
 				   yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
 		printk(KERN_DEBUG "  Tx status %p:\n", yp->tx_status);
 		for (i = 0; i < TX_RING_SIZE; i++)
-			printk("   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+			printk(KERN_DEBUG "   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
 				   i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
 				   yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
 
-		printk("\n"KERN_DEBUG "  Rx ring %8.8llx:\n",
+		printk(KERN_DEBUG "  Rx ring %8.8llx:\n",
 				(unsigned long long)yp->rx_ring_dma);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 5d610cb..0f0e0b9 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1134,7 +1134,7 @@
 	.llseek = seq_lseek,
 	.release = single_release,
 };
-#endif
+#endif /* CONFIG_PROC_FS */
 
 /**
  * ccio_find_ioc - Find the ioc in the ioc_list
@@ -1568,14 +1568,15 @@
 	/* if this fails, no I/O cards will work, so may as well bug */
 	BUG_ON(dev->dev.platform_data == NULL);
 	HBA_DATA(dev->dev.platform_data)->iommu = ioc;
-	
+
+#ifdef CONFIG_PROC_FS
 	if (ioc_count == 0) {
 		proc_create(MODULE_NAME, 0, proc_runway_root,
 			    &ccio_proc_info_fops);
 		proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root,
 			    &ccio_proc_bitmap_fops);
 	}
-
+#endif
 	ioc_count++;
 
 	parisc_has_iommu();
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 52ae0b1..c590974 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -353,7 +353,7 @@
 	return 0;
 }
 
-static struct hw_interrupt_type dino_interrupt_type = {
+static struct irq_chip dino_interrupt_type = {
 	.typename	= "GSC-PCI",
 	.startup	= dino_startup_irq,
 	.shutdown	= dino_disable_irq,
@@ -1019,22 +1019,22 @@
 	** It's not used to avoid chicken/egg problems
 	** with configuration accessor functions.
 	*/
-	bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
-				    &dino_cfg_ops, NULL);
+	dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
+			 dino_current_bus, &dino_cfg_ops, NULL);
+
 	if(bus) {
-		pci_bus_add_devices(bus);
 		/* This code *depends* on scanning being single threaded
 		 * if it isn't, this global bus number count will fail
 		 */
 		dino_current_bus = bus->subordinate + 1;
 		pci_bus_assign_resources(bus);
+		pci_bus_add_devices(bus);
 	} else {
-		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+		printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
 		       dev_name(&dev->dev), dino_current_bus);
 		/* increment the bus number in case of duplicates */
 		dino_current_bus++;
 	}
-	dino_dev->hba.hba_bus = bus;
 	return 0;
 }
 
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 5b89f40..5122074 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -188,7 +188,7 @@
 	return 0;
 }
 
-static struct hw_interrupt_type eisa_interrupt_type = {
+static struct irq_chip eisa_interrupt_type = {
 	.typename =	"EISA",
 	.startup =	eisa_startup_irq,
 	.shutdown =	eisa_disable_irq,
diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c
index c709ecc..0be1d50 100644
--- a/drivers/parisc/eisa_enumerator.c
+++ b/drivers/parisc/eisa_enumerator.c
@@ -101,7 +101,7 @@
 			printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(mem_parent, res);
 			if (result < 0) {
-				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+				printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}
@@ -191,7 +191,7 @@
 			printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
 			result = request_resource(io_parent, res);
 			if (result < 0) {
-				printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+				printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
 				return result;
 			}
 		}
@@ -224,7 +224,7 @@
 		 case HPEE_PORT_INIT_WIDTH_BYTE:
 			s=1;
 			if (c & HPEE_PORT_INIT_MASK) {
-				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+				printk(KERN_WARNING "port_init: unverified mask attribute\n");
 				outb((inb(get_16(buf+len+1) & 
 					  get_8(buf+len+3)) | 
 				      get_8(buf+len+4)), get_16(buf+len+1));
@@ -249,7 +249,7 @@
 		 case HPEE_PORT_INIT_WIDTH_DWORD:
 			s=4;
 			if (c & HPEE_PORT_INIT_MASK) {
- 				printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ 				printk(KERN_WARNING "port_init: unverified mask attribute\n");
 				outl((inl(get_16(buf+len+1) &
 					  get_32(buf+len+3)) |
 				      get_32(buf+len+7)), get_16(buf+len+1));
@@ -259,7 +259,7 @@
 
 			break;
 		 default:
-			printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
+			printk(KERN_ERR "Invalid port init word %02x\n", c);
 			return 0;
 		}
 		
@@ -297,7 +297,7 @@
 	/* just skip past the type field */
 	len = get_8(buf);
 	if (len > 80) {
-		printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+		printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
 	}
 	
 	return 1+len;
@@ -398,7 +398,7 @@
 		}
 		
 		if (p0 + function_len < pos) {
-			printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
+			printk(KERN_ERR "eisa_enumerator: function %d length mis-match "
 			       "got %d, expected %d\n",
 			       num_func, pos-p0, function_len);
 			res=-1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index d336329..647adc9 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -148,7 +148,7 @@
 	return 0;
 }
 
-static struct hw_interrupt_type gsc_asic_interrupt_type = {
+static struct irq_chip gsc_asic_interrupt_type = {
 	.typename =	"GSC-ASIC",
 	.startup =	gsc_asic_startup_irq,
 	.shutdown =	gsc_asic_disable_irq,
@@ -158,7 +158,7 @@
 	.end =		no_end_irq,
 };
 
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
+int gsc_assign_irq(struct irq_chip *type, void *data)
 {
 	static int irq = GSC_IRQ_BASE;
 	struct irq_desc *desc;
diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h
index 762a1ba..b9d7bfb 100644
--- a/drivers/parisc/gsc.h
+++ b/drivers/parisc/gsc.h
@@ -38,7 +38,7 @@
 int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic);
 int gsc_alloc_irq(struct gsc_irq *dev);			/* dev needs an irq */
 int gsc_claim_irq(struct gsc_irq *dev, int irq);	/* dev needs this irq */
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data);
+int gsc_assign_irq(struct irq_chip *type, void *data);
 int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit);
 void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
 		void (*choose)(struct parisc_device *child, void *ctrl));
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 4a9cc92..88e3335 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -729,7 +729,7 @@
 }
 #endif
 
-static struct hw_interrupt_type iosapic_interrupt_type = {
+static struct irq_chip iosapic_interrupt_type = {
 	.typename =	"IO-SAPIC-level",
 	.startup =	iosapic_startup_irq,
 	.shutdown =	iosapic_disable_irq,
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 59fbbf1..ede6146 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -980,28 +980,38 @@
 lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
 {
 	unsigned long bytecnt;
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;	/* PA_VIEW */
-	pdc_pat_cell_mod_maddr_block_t io_pdc_cell;	/* IO_VIEW */
 	long io_count;
 	long status;	/* PDC return status */
 	long pa_count;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;	/* PA_VIEW */
+	pdc_pat_cell_mod_maddr_block_t *io_pdc_cell;	/* IO_VIEW */
 	int i;
 
+	pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		return;
+
+	io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+	if (!pa_pdc_cell) {
+		kfree(pa_pdc_cell);
+		return;
+	}
+
 	/* return cell module (IO view) */
 	status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
-				PA_VIEW, & pa_pdc_cell);
-	pa_count = pa_pdc_cell.mod[1];
+				PA_VIEW, pa_pdc_cell);
+	pa_count = pa_pdc_cell->mod[1];
 
 	status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
-				IO_VIEW, &io_pdc_cell);
-	io_count = io_pdc_cell.mod[1];
+				IO_VIEW, io_pdc_cell);
+	io_count = io_pdc_cell->mod[1];
 
 	/* We've already done this once for device discovery...*/
 	if (status != PDC_OK) {
 		panic("pdc_pat_cell_module() call failed for LBA!\n");
 	}
 
-	if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) {
+	if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
 		panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
 	}
 
@@ -1016,8 +1026,8 @@
 		} *p, *io;
 		struct resource *r;
 
-		p = (void *) &(pa_pdc_cell.mod[2+i*3]);
-		io = (void *) &(io_pdc_cell.mod[2+i*3]);
+		p = (void *) &(pa_pdc_cell->mod[2+i*3]);
+		io = (void *) &(io_pdc_cell->mod[2+i*3]);
 
 		/* Convert the PAT range data to PCI "struct resource" */
 		switch(p->type & 0xff) {
@@ -1096,6 +1106,9 @@
 			break;
 		}
 	}
+
+	kfree(pa_pdc_cell);
+	kfree(io_pdc_cell);
 }
 #else
 /* keep compiler from complaining about missing declarations */
@@ -1509,10 +1522,6 @@
 	lba_bus = lba_dev->hba.hba_bus =
 		pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
 				cfg_ops, NULL);
-	if (lba_bus) {
-		lba_next_bus = lba_bus->subordinate + 1;
-		pci_bus_add_devices(lba_bus);
-	}
 
 	/* This is in lieu of calling pci_assign_unassigned_resources() */
 	if (is_pdc_pat()) {
@@ -1533,7 +1542,6 @@
 	}
 	pci_enable_bridges(lba_bus);
 
-
 	/*
 	** Once PCI register ops has walked the bus, access to config
 	** space is restricted. Avoids master aborts on config cycles.
@@ -1543,6 +1551,11 @@
 		lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
 	}
 
+	if (lba_bus) {
+		lba_next_bus = lba_bus->subordinate + 1;
+		pci_bus_add_devices(lba_bus);
+	}
+
 	/* Whew! Finally done! Tell services we got this one covered. */
 	return 0;
 }
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d46dd57..123d8fe 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2057,6 +2057,7 @@
 		r->start = (base & ~1UL) | PCI_F_EXTEND;
 		size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
 		r->end = r->start + size;
+		r->flags = IORESOURCE_MEM;
 	}
 }
 
@@ -2093,4 +2094,5 @@
 	size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
 	r->start += rope * (size + 1);	/* adjust base for this rope */
 	r->end = r->start + size;
+	r->flags = IORESOURCE_MEM;
 }
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 33e5ade..675f04e 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -325,7 +325,7 @@
 	return 0;
 }
 
-static struct hw_interrupt_type superio_interrupt_type = {
+static struct irq_chip superio_interrupt_type = {
 	.typename =	SUPERIO,
 	.startup =	superio_startup_irq,
 	.shutdown =	superio_disable_irq,
@@ -434,8 +434,8 @@
 			0 /*base_hi*/,
 			PAR_IRQ, 
 			PARPORT_DMA_NONE /* dma */,
-			NULL /*struct pci_dev* */),
-			0 /* shared irq flags */ )
+			NULL /*struct pci_dev* */,
+			0 /* shared irq flags */))
 
 		printk(KERN_WARNING PFX "Probing parallel port failed.\n");
 #endif	/* CONFIG_PARPORT_PC */
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 8445804..5c5043f 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -555,6 +555,8 @@
  * @slot: pointer to the &struct hotplug_slot to register
  * @devnr: device number
  * @name: name registered with kobject core
+ * @owner: caller module owner
+ * @mod_name: caller module name
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
  * userspace interaction to the slot.
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 420afa8..ebc9b8d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -56,14 +56,32 @@
 #define MAX_AGAW_WIDTH 64
 
 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
+#define DOMAIN_MAX_PFN(gaw)  ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1)
 
 #define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT)
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_BIT_MASK(32))
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_BIT_MASK(64))
 
-#ifndef PHYSICAL_PAGE_MASK
-#define PHYSICAL_PAGE_MASK PAGE_MASK
-#endif
+
+/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
+   are never going to work. */
+static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
+{
+	return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+
+static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
+{
+	return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+static inline unsigned long page_to_dma_pfn(struct page *pg)
+{
+	return mm_to_dma_pfn(page_to_pfn(pg));
+}
+static inline unsigned long virt_to_dma_pfn(void *p)
+{
+	return page_to_dma_pfn(virt_to_page(p));
+}
 
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
@@ -204,12 +222,17 @@
 
 static inline u64 dma_pte_addr(struct dma_pte *pte)
 {
-	return (pte->val & VTD_PAGE_MASK);
+#ifdef CONFIG_64BIT
+	return pte->val & VTD_PAGE_MASK;
+#else
+	/* Must have a full atomic 64-bit read */
+	return  __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK;
+#endif
 }
 
-static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr)
+static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn)
 {
-	pte->val |= (addr & VTD_PAGE_MASK);
+	pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT;
 }
 
 static inline bool dma_pte_present(struct dma_pte *pte)
@@ -217,6 +240,11 @@
 	return (pte->val & 3) != 0;
 }
 
+static inline int first_pte_in_page(struct dma_pte *pte)
+{
+	return !((unsigned long)pte & ~VTD_PAGE_MASK);
+}
+
 /*
  * This domain is a statically identity mapping domain.
  *	1. This domain creats a static 1:1 mapping to all usable memory.
@@ -244,7 +272,6 @@
 	struct iova_domain iovad;	/* iova's that belong to this domain */
 
 	struct dma_pte	*pgd;		/* virtual address */
-	spinlock_t	mapping_lock;	/* page table lock */
 	int		gaw;		/* max guest address width */
 
 	/* adjusted guest address width, 0 is level 2 30-bit */
@@ -648,80 +675,78 @@
 
 static inline unsigned int level_to_offset_bits(int level)
 {
-	return (12 + (level - 1) * LEVEL_STRIDE);
+	return (level - 1) * LEVEL_STRIDE;
 }
 
-static inline int address_level_offset(u64 addr, int level)
+static inline int pfn_level_offset(unsigned long pfn, int level)
 {
-	return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK);
+	return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
 }
 
-static inline u64 level_mask(int level)
+static inline unsigned long level_mask(int level)
 {
-	return ((u64)-1 << level_to_offset_bits(level));
+	return -1UL << level_to_offset_bits(level);
 }
 
-static inline u64 level_size(int level)
+static inline unsigned long level_size(int level)
 {
-	return ((u64)1 << level_to_offset_bits(level));
+	return 1UL << level_to_offset_bits(level);
 }
 
-static inline u64 align_to_level(u64 addr, int level)
+static inline unsigned long align_to_level(unsigned long pfn, int level)
 {
-	return ((addr + level_size(level) - 1) & level_mask(level));
+	return (pfn + level_size(level) - 1) & level_mask(level);
 }
 
-static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr)
+static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
+				      unsigned long pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
 	struct dma_pte *parent, *pte = NULL;
 	int level = agaw_to_level(domain->agaw);
 	int offset;
-	unsigned long flags;
 
 	BUG_ON(!domain->pgd);
-
-	addr &= (((u64)1) << addr_width) - 1;
+	BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
 	parent = domain->pgd;
 
-	spin_lock_irqsave(&domain->mapping_lock, flags);
 	while (level > 0) {
 		void *tmp_page;
 
-		offset = address_level_offset(addr, level);
+		offset = pfn_level_offset(pfn, level);
 		pte = &parent[offset];
 		if (level == 1)
 			break;
 
 		if (!dma_pte_present(pte)) {
+			uint64_t pteval;
+
 			tmp_page = alloc_pgtable_page();
 
-			if (!tmp_page) {
-				spin_unlock_irqrestore(&domain->mapping_lock,
-					flags);
+			if (!tmp_page)
 				return NULL;
+
+			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
+			pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+			if (cmpxchg64(&pte->val, 0ULL, pteval)) {
+				/* Someone else set it while we were thinking; use theirs. */
+				free_pgtable_page(tmp_page);
+			} else {
+				dma_pte_addr(pte);
+				domain_flush_cache(domain, pte, sizeof(*pte));
 			}
-			domain_flush_cache(domain, tmp_page, PAGE_SIZE);
-			dma_set_pte_addr(pte, virt_to_phys(tmp_page));
-			/*
-			 * high level table always sets r/w, last level page
-			 * table control read/write
-			 */
-			dma_set_pte_readable(pte);
-			dma_set_pte_writable(pte);
-			domain_flush_cache(domain, pte, sizeof(*pte));
 		}
 		parent = phys_to_virt(dma_pte_addr(pte));
 		level--;
 	}
 
-	spin_unlock_irqrestore(&domain->mapping_lock, flags);
 	return pte;
 }
 
 /* return address's pte at specific level */
-static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
-		int level)
+static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
+					 unsigned long pfn,
+					 int level)
 {
 	struct dma_pte *parent, *pte = NULL;
 	int total = agaw_to_level(domain->agaw);
@@ -729,7 +754,7 @@
 
 	parent = domain->pgd;
 	while (level <= total) {
-		offset = address_level_offset(addr, total);
+		offset = pfn_level_offset(pfn, total);
 		pte = &parent[offset];
 		if (level == total)
 			return pte;
@@ -742,74 +767,82 @@
 	return NULL;
 }
 
-/* clear one page's page table */
-static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr)
-{
-	struct dma_pte *pte = NULL;
-
-	/* get last level pte */
-	pte = dma_addr_level_pte(domain, addr, 1);
-
-	if (pte) {
-		dma_clear_pte(pte);
-		domain_flush_cache(domain, pte, sizeof(*pte));
-	}
-}
-
 /* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end)
+static void dma_pte_clear_range(struct dmar_domain *domain,
+				unsigned long start_pfn,
+				unsigned long last_pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
-	int npages;
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	struct dma_pte *first_pte, *pte;
 
-	start &= (((u64)1) << addr_width) - 1;
-	end &= (((u64)1) << addr_width) - 1;
-	/* in case it's partial page */
-	start &= PAGE_MASK;
-	end = PAGE_ALIGN(end);
-	npages = (end - start) / VTD_PAGE_SIZE;
+	BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+	BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
 
-	/* we don't need lock here, nobody else touches the iova range */
-	while (npages--) {
-		dma_pte_clear_one(domain, start);
-		start += VTD_PAGE_SIZE;
+	/* we don't need lock here; nobody else touches the iova range */
+	while (start_pfn <= last_pfn) {
+		first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1);
+		if (!pte) {
+			start_pfn = align_to_level(start_pfn + 1, 2);
+			continue;
+		}
+		do { 
+			dma_clear_pte(pte);
+			start_pfn++;
+			pte++;
+		} while (start_pfn <= last_pfn && !first_pte_in_page(pte));
+
+		domain_flush_cache(domain, first_pte,
+				   (void *)pte - (void *)first_pte);
 	}
 }
 
 /* free page table pages. last level pte should already be cleared */
 static void dma_pte_free_pagetable(struct dmar_domain *domain,
-	u64 start, u64 end)
+				   unsigned long start_pfn,
+				   unsigned long last_pfn)
 {
-	int addr_width = agaw_to_width(domain->agaw);
-	struct dma_pte *pte;
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	struct dma_pte *first_pte, *pte;
 	int total = agaw_to_level(domain->agaw);
 	int level;
-	u64 tmp;
+	unsigned long tmp;
 
-	start &= (((u64)1) << addr_width) - 1;
-	end &= (((u64)1) << addr_width) - 1;
+	BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+	BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
 
-	/* we don't need lock here, nobody else touches the iova range */
+	/* We don't need lock here; nobody else touches the iova range */
 	level = 2;
 	while (level <= total) {
-		tmp = align_to_level(start, level);
-		if (tmp >= end || (tmp + level_size(level) > end))
+		tmp = align_to_level(start_pfn, level);
+
+		/* If we can't even clear one PTE at this level, we're done */
+		if (tmp + level_size(level) - 1 > last_pfn)
 			return;
 
-		while (tmp < end) {
-			pte = dma_addr_level_pte(domain, tmp, level);
-			if (pte) {
-				free_pgtable_page(
-					phys_to_virt(dma_pte_addr(pte)));
-				dma_clear_pte(pte);
-				domain_flush_cache(domain, pte, sizeof(*pte));
+		while (tmp + level_size(level) - 1 <= last_pfn) {
+			first_pte = pte = dma_pfn_level_pte(domain, tmp, level);
+			if (!pte) {
+				tmp = align_to_level(tmp + 1, level + 1);
+				continue;
 			}
-			tmp += level_size(level);
+			do {
+				if (dma_pte_present(pte)) {
+					free_pgtable_page(phys_to_virt(dma_pte_addr(pte)));
+					dma_clear_pte(pte);
+				}
+				pte++;
+				tmp += level_size(level);
+			} while (!first_pte_in_page(pte) &&
+				 tmp + level_size(level) - 1 <= last_pfn);
+
+			domain_flush_cache(domain, first_pte,
+					   (void *)pte - (void *)first_pte);
+			
 		}
 		level++;
 	}
 	/* free pgd */
-	if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) {
+	if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
 		free_pgtable_page(domain->pgd);
 		domain->pgd = NULL;
 	}
@@ -1035,11 +1068,11 @@
 }
 
 static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
-				  u64 addr, unsigned int pages)
+				  unsigned long pfn, unsigned int pages)
 {
 	unsigned int mask = ilog2(__roundup_pow_of_two(pages));
+	uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
 
-	BUG_ON(addr & (~VTD_PAGE_MASK));
 	BUG_ON(pages == 0);
 
 	/*
@@ -1054,7 +1087,12 @@
 	else
 		iommu->flush.flush_iotlb(iommu, did, addr, mask,
 						DMA_TLB_PSI_FLUSH);
-	if (did)
+
+	/*
+	 * In caching mode, domain ID 0 is reserved for non-present to present
+	 * mapping flush. Device IOTLB doesn't need to be flushed in this case.
+	 */
+	if (!cap_caching_mode(iommu->cap) || did)
 		iommu_flush_dev_iotlb(iommu->domains[did], addr, mask);
 }
 
@@ -1279,7 +1317,6 @@
 	struct pci_dev *pdev = NULL;
 	struct iova *iova;
 	int i;
-	u64 addr, size;
 
 	init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
 
@@ -1302,12 +1339,9 @@
 			r = &pdev->resource[i];
 			if (!r->flags || !(r->flags & IORESOURCE_MEM))
 				continue;
-			addr = r->start;
-			addr &= PHYSICAL_PAGE_MASK;
-			size = r->end - addr;
-			size = PAGE_ALIGN(size);
-			iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
-				IOVA_PFN(size + addr) - 1);
+			iova = reserve_iova(&reserved_iova_list,
+					    IOVA_PFN(r->start),
+					    IOVA_PFN(r->end));
 			if (!iova)
 				printk(KERN_ERR "Reserve iova failed\n");
 		}
@@ -1341,7 +1375,6 @@
 	unsigned long sagaw;
 
 	init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
-	spin_lock_init(&domain->mapping_lock);
 	spin_lock_init(&domain->iommu_lock);
 
 	domain_reserve_special_ranges(domain);
@@ -1388,7 +1421,6 @@
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	u64 end;
 
 	/* Domain 0 is reserved, so dont process it */
 	if (!domain)
@@ -1397,14 +1429,12 @@
 	domain_remove_dev_info(domain);
 	/* destroy iovas */
 	put_iova_domain(&domain->iovad);
-	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~PAGE_MASK);
 
 	/* clear ptes */
-	dma_pte_clear_range(domain, 0, end);
+	dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	/* free page tables */
-	dma_pte_free_pagetable(domain, 0, end);
+	dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	for_each_active_iommu(iommu, drhd)
 		if (test_bit(iommu->seq_id, &domain->iommu_bmp))
@@ -1618,42 +1648,86 @@
 					     tmp->devfn);
 }
 
-static int
-domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova,
-			u64 hpa, size_t size, int prot)
+static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+			    struct scatterlist *sg, unsigned long phys_pfn,
+			    unsigned long nr_pages, int prot)
 {
-	u64 start_pfn, end_pfn;
-	struct dma_pte *pte;
-	int index;
-	int addr_width = agaw_to_width(domain->agaw);
+	struct dma_pte *first_pte = NULL, *pte = NULL;
+	phys_addr_t uninitialized_var(pteval);
+	int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+	unsigned long sg_res;
 
-	hpa &= (((u64)1) << addr_width) - 1;
+	BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width);
 
 	if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
 		return -EINVAL;
-	iova &= PAGE_MASK;
-	start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT;
-	end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT;
-	index = 0;
-	while (start_pfn < end_pfn) {
-		pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index);
-		if (!pte)
-			return -ENOMEM;
+
+	prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP;
+
+	if (sg)
+		sg_res = 0;
+	else {
+		sg_res = nr_pages + 1;
+		pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot;
+	}
+
+	while (nr_pages--) {
+		uint64_t tmp;
+
+		if (!sg_res) {
+			sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT;
+			sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
+			sg->dma_length = sg->length;
+			pteval = page_to_phys(sg_page(sg)) | prot;
+		}
+		if (!pte) {
+			first_pte = pte = pfn_to_dma_pte(domain, iov_pfn);
+			if (!pte)
+				return -ENOMEM;
+		}
 		/* We don't need lock here, nobody else
 		 * touches the iova range
 		 */
-		BUG_ON(dma_pte_addr(pte));
-		dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT);
-		dma_set_pte_prot(pte, prot);
-		if (prot & DMA_PTE_SNP)
-			dma_set_pte_snp(pte);
-		domain_flush_cache(domain, pte, sizeof(*pte));
-		start_pfn++;
-		index++;
+		tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
+		if (tmp) {
+			static int dumps = 5;
+			printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
+			       iov_pfn, tmp, (unsigned long long)pteval);
+			if (dumps) {
+				dumps--;
+				debug_dma_dump_mappings(NULL);
+			}
+			WARN_ON(1);
+		}
+		pte++;
+		if (!nr_pages || first_pte_in_page(pte)) {
+			domain_flush_cache(domain, first_pte,
+					   (void *)pte - (void *)first_pte);
+			pte = NULL;
+		}
+		iov_pfn++;
+		pteval += VTD_PAGE_SIZE;
+		sg_res--;
+		if (!sg_res)
+			sg = sg_next(sg);
 	}
 	return 0;
 }
 
+static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+				    struct scatterlist *sg, unsigned long nr_pages,
+				    int prot)
+{
+	return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot);
+}
+
+static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+				     unsigned long phys_pfn, unsigned long nr_pages,
+				     int prot)
+{
+	return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot);
+}
+
 static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn)
 {
 	if (!iommu)
@@ -1844,58 +1918,61 @@
 
 static int iommu_identity_mapping;
 
+static int iommu_domain_identity_map(struct dmar_domain *domain,
+				     unsigned long long start,
+				     unsigned long long end)
+{
+	unsigned long first_vpfn = start >> VTD_PAGE_SHIFT;
+	unsigned long last_vpfn = end >> VTD_PAGE_SHIFT;
+
+	if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn),
+			  dma_to_mm_pfn(last_vpfn))) {
+		printk(KERN_ERR "IOMMU: reserve iova failed\n");
+		return -ENOMEM;
+	}
+
+	pr_debug("Mapping reserved region %llx-%llx for domain %d\n",
+		 start, end, domain->id);
+	/*
+	 * RMRR range might have overlap with physical memory range,
+	 * clear it first
+	 */
+	dma_pte_clear_range(domain, first_vpfn, last_vpfn);
+
+	return domain_pfn_mapping(domain, first_vpfn, first_vpfn,
+				  last_vpfn - first_vpfn + 1,
+				  DMA_PTE_READ|DMA_PTE_WRITE);
+}
+
 static int iommu_prepare_identity_map(struct pci_dev *pdev,
 				      unsigned long long start,
 				      unsigned long long end)
 {
 	struct dmar_domain *domain;
-	unsigned long size;
-	unsigned long long base;
 	int ret;
 
 	printk(KERN_INFO
-		"IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
-		pci_name(pdev), start, end);
-	if (iommu_identity_mapping)
-		domain = si_domain;
-	else
-		/* page table init */
-		domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+	       "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
+	       pci_name(pdev), start, end);
+
+	domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
 	if (!domain)
 		return -ENOMEM;
 
-	/* The address might not be aligned */
-	base = start & PAGE_MASK;
-	size = end - base;
-	size = PAGE_ALIGN(size);
-	if (!reserve_iova(&domain->iovad, IOVA_PFN(base),
-			IOVA_PFN(base + size) - 1)) {
-		printk(KERN_ERR "IOMMU: reserve iova failed\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	pr_debug("Mapping reserved region %lx@%llx for %s\n",
-		size, base, pci_name(pdev));
-	/*
-	 * RMRR range might have overlap with physical memory range,
-	 * clear it first
-	 */
-	dma_pte_clear_range(domain, base, base + size);
-
-	ret = domain_page_mapping(domain, base, base, size,
-		DMA_PTE_READ|DMA_PTE_WRITE);
+	ret = iommu_domain_identity_map(domain, start, end);
 	if (ret)
 		goto error;
 
 	/* context entry init */
 	ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL);
-	if (!ret)
-		return 0;
-error:
+	if (ret)
+		goto error;
+
+	return 0;
+
+ error:
 	domain_exit(domain);
 	return ret;
-
 }
 
 static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
@@ -1907,64 +1984,6 @@
 		rmrr->end_address + 1);
 }
 
-struct iommu_prepare_data {
-	struct pci_dev *pdev;
-	int ret;
-};
-
-static int __init iommu_prepare_work_fn(unsigned long start_pfn,
-					 unsigned long end_pfn, void *datax)
-{
-	struct iommu_prepare_data *data;
-
-	data = (struct iommu_prepare_data *)datax;
-
-	data->ret = iommu_prepare_identity_map(data->pdev,
-				start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
-	return data->ret;
-
-}
-
-static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev)
-{
-	int nid;
-	struct iommu_prepare_data data;
-
-	data.pdev = pdev;
-	data.ret = 0;
-
-	for_each_online_node(nid) {
-		work_with_active_regions(nid, iommu_prepare_work_fn, &data);
-		if (data.ret)
-			return data.ret;
-	}
-	return data.ret;
-}
-
-#ifdef CONFIG_DMAR_GFX_WA
-static void __init iommu_prepare_gfx_mapping(void)
-{
-	struct pci_dev *pdev = NULL;
-	int ret;
-
-	for_each_pci_dev(pdev) {
-		if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO ||
-				!IS_GFX_DEVICE(pdev))
-			continue;
-		printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n",
-			pci_name(pdev));
-		ret = iommu_prepare_with_active_regions(pdev);
-		if (ret)
-			printk(KERN_ERR "IOMMU: mapping reserved region failed\n");
-	}
-}
-#else /* !CONFIG_DMAR_GFX_WA */
-static inline void iommu_prepare_gfx_mapping(void)
-{
-	return;
-}
-#endif
-
 #ifdef CONFIG_DMAR_FLOPPY_WA
 static inline void iommu_prepare_isa(void)
 {
@@ -1975,12 +1994,12 @@
 	if (!pdev)
 		return;
 
-	printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n");
+	printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n");
 	ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024);
 
 	if (ret)
-		printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, "
-			"floppy might not work\n");
+		printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; "
+		       "floppy might not work\n");
 
 }
 #else
@@ -2008,16 +2027,30 @@
 }
 
 static int md_domain_init(struct dmar_domain *domain, int guest_width);
+
+static int __init si_domain_work_fn(unsigned long start_pfn,
+				    unsigned long end_pfn, void *datax)
+{
+	int *ret = datax;
+
+	*ret = iommu_domain_identity_map(si_domain,
+					 (uint64_t)start_pfn << PAGE_SHIFT,
+					 (uint64_t)end_pfn << PAGE_SHIFT);
+	return *ret;
+
+}
+
 static int si_domain_init(void)
 {
 	struct dmar_drhd_unit *drhd;
 	struct intel_iommu *iommu;
-	int ret = 0;
+	int nid, ret = 0;
 
 	si_domain = alloc_domain();
 	if (!si_domain)
 		return -EFAULT;
 
+	pr_debug("Identity mapping domain is domain %d\n", si_domain->id);
 
 	for_each_active_iommu(iommu, drhd) {
 		ret = iommu_attach_domain(si_domain, iommu);
@@ -2034,6 +2067,12 @@
 
 	si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY;
 
+	for_each_online_node(nid) {
+		work_with_active_regions(nid, si_domain_work_fn, &ret);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -2078,6 +2117,47 @@
 	return 0;
 }
 
+static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
+{
+	if (iommu_identity_mapping == 2)
+		return IS_GFX_DEVICE(pdev);
+
+	/*
+	 * We want to start off with all devices in the 1:1 domain, and
+	 * take them out later if we find they can't access all of memory.
+	 *
+	 * However, we can't do this for PCI devices behind bridges,
+	 * because all PCI devices behind the same bridge will end up
+	 * with the same source-id on their transactions.
+	 *
+	 * Practically speaking, we can't change things around for these
+	 * devices at run-time, because we can't be sure there'll be no
+	 * DMA transactions in flight for any of their siblings.
+	 * 
+	 * So PCI devices (unless they're on the root bus) as well as
+	 * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of
+	 * the 1:1 domain, just in _case_ one of their siblings turns out
+	 * not to be able to map all of memory.
+	 */
+	if (!pdev->is_pcie) {
+		if (!pci_is_root_bus(pdev->bus))
+			return 0;
+		if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+			return 0;
+	} else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+		return 0;
+
+	/* 
+	 * At boot time, we don't yet know if devices will be 64-bit capable.
+	 * Assume that they will -- if they turn out not to be, then we can 
+	 * take them out of the 1:1 domain later.
+	 */
+	if (!startup)
+		return pdev->dma_mask > DMA_BIT_MASK(32);
+
+	return 1;
+}
+
 static int iommu_prepare_static_identity_mapping(void)
 {
 	struct pci_dev *pdev = NULL;
@@ -2087,16 +2167,19 @@
 	if (ret)
 		return -EFAULT;
 
-	printk(KERN_INFO "IOMMU: Setting identity map:\n");
 	for_each_pci_dev(pdev) {
-		ret = iommu_prepare_with_active_regions(pdev);
-		if (ret) {
-			printk(KERN_INFO "1:1 mapping to one domain failed.\n");
-			return -EFAULT;
+		if (iommu_should_identity_map(pdev, 1)) {
+			printk(KERN_INFO "IOMMU: identity mapping for device %s\n",
+			       pci_name(pdev));
+
+			ret = domain_context_mapping(si_domain, pdev,
+						     CONTEXT_TT_MULTI_LEVEL);
+			if (ret)
+				return ret;
+			ret = domain_add_dev_info(si_domain, pdev);
+			if (ret)
+				return ret;
 		}
-		ret = domain_add_dev_info(si_domain, pdev);
-		if (ret)
-			return ret;
 	}
 
 	return 0;
@@ -2251,6 +2334,10 @@
 	 * identity mapping if iommu_identity_mapping is set.
 	 */
 	if (!iommu_pass_through) {
+#ifdef CONFIG_DMAR_BROKEN_GFX_WA
+		if (!iommu_identity_mapping)
+			iommu_identity_mapping = 2;
+#endif
 		if (iommu_identity_mapping)
 			iommu_prepare_static_identity_mapping();
 		/*
@@ -2284,8 +2371,6 @@
 			}
 		}
 
-		iommu_prepare_gfx_mapping();
-
 		iommu_prepare_isa();
 	}
 
@@ -2330,50 +2415,40 @@
 	return ret;
 }
 
-static inline u64 aligned_size(u64 host_addr, size_t size)
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+					    size_t size)
 {
-	u64 addr;
-	addr = (host_addr & (~PAGE_MASK)) + size;
-	return PAGE_ALIGN(addr);
+	host_addr &= ~PAGE_MASK;
+	return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
 }
 
-struct iova *
-iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end)
-{
-	struct iova *piova;
-
-	/* Make sure it's in range */
-	end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end);
-	if (!size || (IOVA_START_ADDR + size > end))
-		return NULL;
-
-	piova = alloc_iova(&domain->iovad,
-			size >> PAGE_SHIFT, IOVA_PFN(end), 1);
-	return piova;
-}
-
-static struct iova *
-__intel_alloc_iova(struct device *dev, struct dmar_domain *domain,
-		   size_t size, u64 dma_mask)
+/* This takes a number of _MM_ pages, not VTD pages */
+static struct iova *intel_alloc_iova(struct device *dev,
+				     struct dmar_domain *domain,
+				     unsigned long nrpages, uint64_t dma_mask)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct iova *iova = NULL;
 
-	if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac)
-		iova = iommu_alloc_iova(domain, size, dma_mask);
-	else {
+	/* Restrict dma_mask to the width that the iommu can handle */
+	dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
+
+	if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
 		/*
 		 * First try to allocate an io virtual address in
 		 * DMA_BIT_MASK(32) and if that fails then try allocating
 		 * from higher range
 		 */
-		iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32));
-		if (!iova)
-			iova = iommu_alloc_iova(domain, size, dma_mask);
+		iova = alloc_iova(&domain->iovad, nrpages,
+				  IOVA_PFN(DMA_BIT_MASK(32)), 1);
+		if (iova)
+			return iova;
 	}
-
-	if (!iova) {
-		printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev));
+	iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1);
+	if (unlikely(!iova)) {
+		printk(KERN_ERR "Allocating %ld-page iova for %s failed",
+		       nrpages, pci_name(pdev));
 		return NULL;
 	}
 
@@ -2415,16 +2490,24 @@
 }
 
 /* Check if the pdev needs to go through non-identity map and unmap process.*/
-static int iommu_no_mapping(struct pci_dev *pdev)
+static int iommu_no_mapping(struct device *dev)
 {
+	struct pci_dev *pdev;
 	int found;
 
+	if (unlikely(dev->bus != &pci_bus_type))
+		return 1;
+
+	pdev = to_pci_dev(dev);
+	if (iommu_dummy(pdev))
+		return 1;
+
 	if (!iommu_identity_mapping)
-		return iommu_dummy(pdev);
+		return 0;
 
 	found = identity_mapping(pdev);
 	if (found) {
-		if (pdev->dma_mask > DMA_BIT_MASK(32))
+		if (iommu_should_identity_map(pdev, 0))
 			return 1;
 		else {
 			/*
@@ -2441,9 +2524,12 @@
 		 * In case of a detached 64 bit DMA device from vm, the device
 		 * is put into si_domain for identity mapping.
 		 */
-		if (pdev->dma_mask > DMA_BIT_MASK(32)) {
+		if (iommu_should_identity_map(pdev, 0)) {
 			int ret;
 			ret = domain_add_dev_info(si_domain, pdev);
+			if (ret)
+				return 0;
+			ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
 			if (!ret) {
 				printk(KERN_INFO "64bit %s uses identity mapping\n",
 				       pci_name(pdev));
@@ -2452,7 +2538,7 @@
 		}
 	}
 
-	return iommu_dummy(pdev);
+	return 0;
 }
 
 static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
@@ -2468,7 +2554,7 @@
 
 	BUG_ON(dir == DMA_NONE);
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return paddr;
 
 	domain = get_valid_domain_for_dev(pdev);
@@ -2476,14 +2562,13 @@
 		return 0;
 
 	iommu = domain_get_iommu(domain);
-	size = aligned_size((u64)paddr, size);
+	size = aligned_nrpages(paddr, size);
 
-	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+	iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+				pdev->dma_mask);
 	if (!iova)
 		goto error;
 
-	start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
-
 	/*
 	 * Check if DMAR supports zero-length reads on write only
 	 * mappings..
@@ -2499,20 +2584,20 @@
 	 * might have two guest_addr mapping to the same host paddr, but this
 	 * is not a big problem
 	 */
-	ret = domain_page_mapping(domain, start_paddr,
-				  ((u64)paddr) & PHYSICAL_PAGE_MASK,
-				  size, prot);
+	ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
+				 paddr >> VTD_PAGE_SHIFT, size, prot);
 	if (ret)
 		goto error;
 
 	/* it's a non-present to present mapping. Only flush if caching mode */
 	if (cap_caching_mode(iommu->cap))
-		iommu_flush_iotlb_psi(iommu, 0, start_paddr,
-				      size >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size);
 	else
 		iommu_flush_write_buffer(iommu);
 
-	return start_paddr + ((u64)paddr & (~PAGE_MASK));
+	start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
+	start_paddr += paddr & ~PAGE_MASK;
+	return start_paddr;
 
 error:
 	if (iova)
@@ -2605,11 +2690,11 @@
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct dmar_domain *domain;
-	unsigned long start_addr;
+	unsigned long start_pfn, last_pfn;
 	struct iova *iova;
 	struct intel_iommu *iommu;
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(dev))
 		return;
 
 	domain = find_domain(pdev);
@@ -2618,22 +2703,25 @@
 	iommu = domain_get_iommu(domain);
 
 	iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr));
-	if (!iova)
+	if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n",
+		      (unsigned long long)dev_addr))
 		return;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
-	size = aligned_size((u64)dev_addr, size);
+	start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+	last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
 
-	pr_debug("Device %s unmapping: %zx@%llx\n",
-		pci_name(pdev), size, (unsigned long long)start_addr);
+	pr_debug("Device %s unmapping: pfn %lx-%lx\n",
+		 pci_name(pdev), start_pfn, last_pfn);
 
 	/*  clear the whole page */
-	dma_pte_clear_range(domain, start_addr, start_addr + size);
+	dma_pte_clear_range(domain, start_pfn, last_pfn);
+
 	/* free page tables */
-	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+	dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
 	if (intel_iommu_strict) {
-		iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
-				      size >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+				      last_pfn - start_pfn + 1);
 		/* free iova */
 		__free_iova(&domain->iovad, iova);
 	} else {
@@ -2691,17 +2779,13 @@
 			   int nelems, enum dma_data_direction dir,
 			   struct dma_attrs *attrs)
 {
-	int i;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
 	struct dmar_domain *domain;
-	unsigned long start_addr;
+	unsigned long start_pfn, last_pfn;
 	struct iova *iova;
-	size_t size = 0;
-	phys_addr_t addr;
-	struct scatterlist *sg;
 	struct intel_iommu *iommu;
 
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return;
 
 	domain = find_domain(pdev);
@@ -2710,22 +2794,21 @@
 	iommu = domain_get_iommu(domain);
 
 	iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address));
-	if (!iova)
+	if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n",
+		      (unsigned long long)sglist[0].dma_address))
 		return;
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size += aligned_size((u64)addr, sg->length);
-	}
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
+	start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+	last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
 
 	/*  clear the whole page */
-	dma_pte_clear_range(domain, start_addr, start_addr + size);
-	/* free page tables */
-	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+	dma_pte_clear_range(domain, start_pfn, last_pfn);
 
-	iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
-			      size >> VTD_PAGE_SHIFT);
+	/* free page tables */
+	dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
+	iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+			      (last_pfn - start_pfn + 1));
 
 	/* free iova */
 	__free_iova(&domain->iovad, iova);
@@ -2748,21 +2831,20 @@
 static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems,
 			enum dma_data_direction dir, struct dma_attrs *attrs)
 {
-	phys_addr_t addr;
 	int i;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
 	struct dmar_domain *domain;
 	size_t size = 0;
 	int prot = 0;
-	size_t offset = 0;
+	size_t offset_pfn = 0;
 	struct iova *iova = NULL;
 	int ret;
 	struct scatterlist *sg;
-	unsigned long start_addr;
+	unsigned long start_vpfn;
 	struct intel_iommu *iommu;
 
 	BUG_ON(dir == DMA_NONE);
-	if (iommu_no_mapping(pdev))
+	if (iommu_no_mapping(hwdev))
 		return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir);
 
 	domain = get_valid_domain_for_dev(pdev);
@@ -2771,12 +2853,11 @@
 
 	iommu = domain_get_iommu(domain);
 
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size += aligned_size((u64)addr, sg->length);
-	}
+	for_each_sg(sglist, sg, nelems, i)
+		size += aligned_nrpages(sg->offset, sg->length);
 
-	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+	iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+				pdev->dma_mask);
 	if (!iova) {
 		sglist->dma_length = 0;
 		return 0;
@@ -2792,35 +2873,24 @@
 	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
 		prot |= DMA_PTE_WRITE;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT;
-	offset = 0;
-	for_each_sg(sglist, sg, nelems, i) {
-		addr = page_to_phys(sg_page(sg)) + sg->offset;
-		size = aligned_size((u64)addr, sg->length);
-		ret = domain_page_mapping(domain, start_addr + offset,
-					  ((u64)addr) & PHYSICAL_PAGE_MASK,
-					  size, prot);
-		if (ret) {
-			/*  clear the page */
-			dma_pte_clear_range(domain, start_addr,
-				  start_addr + offset);
-			/* free page tables */
-			dma_pte_free_pagetable(domain, start_addr,
-				  start_addr + offset);
-			/* free iova */
-			__free_iova(&domain->iovad, iova);
-			return 0;
-		}
-		sg->dma_address = start_addr + offset +
-				((u64)addr & (~PAGE_MASK));
-		sg->dma_length = sg->length;
-		offset += size;
+	start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
+
+	ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot);
+	if (unlikely(ret)) {
+		/*  clear the page */
+		dma_pte_clear_range(domain, start_vpfn,
+				    start_vpfn + size - 1);
+		/* free page tables */
+		dma_pte_free_pagetable(domain, start_vpfn,
+				       start_vpfn + size - 1);
+		/* free iova */
+		__free_iova(&domain->iovad, iova);
+		return 0;
 	}
 
 	/* it's a non-present to present mapping. Only flush if caching mode */
 	if (cap_caching_mode(iommu->cap))
-		iommu_flush_iotlb_psi(iommu, 0, start_addr,
-				      offset >> VTD_PAGE_SHIFT);
+		iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn);
 	else
 		iommu_flush_write_buffer(iommu);
 
@@ -3325,7 +3395,6 @@
 	int adjust_width;
 
 	init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
-	spin_lock_init(&domain->mapping_lock);
 	spin_lock_init(&domain->iommu_lock);
 
 	domain_reserve_special_ranges(domain);
@@ -3379,8 +3448,6 @@
 
 static void vm_domain_exit(struct dmar_domain *domain)
 {
-	u64 end;
-
 	/* Domain 0 is reserved, so dont process it */
 	if (!domain)
 		return;
@@ -3388,14 +3455,12 @@
 	vm_domain_remove_all_dev_info(domain);
 	/* destroy iovas */
 	put_iova_domain(&domain->iovad);
-	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~VTD_PAGE_MASK);
 
 	/* clear ptes */
-	dma_pte_clear_range(domain, 0, end);
+	dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	/* free page tables */
-	dma_pte_free_pagetable(domain, 0, end);
+	dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
 
 	iommu_free_vm_domain(domain);
 	free_domain_mem(domain);
@@ -3504,7 +3569,7 @@
 	if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
 		prot |= DMA_PTE_SNP;
 
-	max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size);
+	max_addr = iova + size;
 	if (dmar_domain->max_addr < max_addr) {
 		int min_agaw;
 		u64 end;
@@ -3522,8 +3587,11 @@
 		}
 		dmar_domain->max_addr = max_addr;
 	}
-
-	ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot);
+	/* Round up size to next multiple of PAGE_SIZE, if it and
+	   the low bits of hpa would take us onto the next page */
+	size = aligned_nrpages(hpa, size);
+	ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
+				 hpa >> VTD_PAGE_SHIFT, size, prot);
 	return ret;
 }
 
@@ -3531,15 +3599,15 @@
 				    unsigned long iova, size_t size)
 {
 	struct dmar_domain *dmar_domain = domain->priv;
-	dma_addr_t base;
 
-	/* The address might not be aligned */
-	base = iova & VTD_PAGE_MASK;
-	size = VTD_PAGE_ALIGN(size);
-	dma_pte_clear_range(dmar_domain, base, base + size);
+	if (!size)
+		return;
 
-	if (dmar_domain->max_addr == base + size)
-		dmar_domain->max_addr = base;
+	dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+			    (iova + size - 1) >> VTD_PAGE_SHIFT);
+
+	if (dmar_domain->max_addr == iova + size)
+		dmar_domain->max_addr = iova;
 }
 
 static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3549,7 +3617,7 @@
 	struct dma_pte *pte;
 	u64 phys = 0;
 
-	pte = addr_to_dma_pte(dmar_domain, iova);
+	pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT);
 	if (pte)
 		phys = dma_pte_addr(pte);
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d9f06fb..d986afb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -127,17 +127,23 @@
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
 	if (!desc->msi_attrib.maskbit)
-		return;
+		return 0;
 
 	mask_bits &= ~mask;
 	mask_bits |= flag;
 	pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
-	desc->masked = mask_bits;
+
+	return mask_bits;
+}
+
+static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+{
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -147,15 +153,21 @@
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
+						PCI_MSIX_ENTRY_VECTOR_CTRL;
 	mask_bits &= ~1;
 	mask_bits |= flag;
 	writel(mask_bits, desc->mask_base + offset);
-	desc->masked = mask_bits;
+
+	return mask_bits;
+}
+
+static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+{
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(unsigned irq, u32 flag)
@@ -188,9 +200,9 @@
 		void __iomem *base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
 
-		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
-		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
-		msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
+		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
+		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
+		msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
 	} else {
 		struct pci_dev *dev = entry->dev;
 		int pos = entry->msi_attrib.pos;
@@ -225,11 +237,9 @@
 		base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
 
-		writel(msg->address_lo,
-			base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
-		writel(msg->address_hi,
-			base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
-		writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
+		writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
+		writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
+		writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
 	} else {
 		struct pci_dev *dev = entry->dev;
 		int pos = entry->msi_attrib.pos;
@@ -385,6 +395,7 @@
 	/* Configure MSI capability structure */
 	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
+		msi_mask_irq(entry, mask, ~mask);
 		msi_free_irqs(dev);
 		return ret;
 	}
@@ -439,8 +450,14 @@
 
 	for (i = 0; i < nvec; i++) {
 		entry = alloc_msi_entry(dev);
-		if (!entry)
-			break;
+		if (!entry) {
+			if (!i)
+				iounmap(base);
+			else
+				msi_free_irqs(dev);
+			/* No enough memory. Don't try again */
+			return -ENOMEM;
+		}
 
  		j = entries[i].entry;
 		entry->msi_attrib.is_msix = 1;
@@ -487,7 +504,7 @@
 		set_irq_msi(entry->irq, entry);
 		j = entries[i].entry;
 		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+						PCI_MSIX_ENTRY_VECTOR_CTRL);
 		msix_mask_irq(entry, 1);
 		i++;
 	}
@@ -611,9 +628,11 @@
 	pci_intx_for_msi(dev, 1);
 	dev->msi_enabled = 0;
 
+	/* Return the device with MSI unmasked as initial states */
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
 	mask = msi_capable_mask(ctrl);
-	msi_mask_irq(desc, mask, ~mask);
+	/* Keep cached state to be restored */
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -653,7 +672,6 @@
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
-			msix_mask_irq(entry, 1);
 			if (list_is_last(&entry->list, &dev->msi_list))
 				iounmap(entry->mask_base);
 		}
@@ -741,9 +759,17 @@
 
 void pci_msix_shutdown(struct pci_dev* dev)
 {
+	struct msi_desc *entry;
+
 	if (!pci_msi_enable || !dev || !dev->msix_enabled)
 		return;
 
+	/* Return the device with MSI-X masked as initial states */
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		/* Keep cached states to be restored */
+		__msix_mask_irq(entry, 1);
+	}
+
 	msix_set_enable(dev, 0);
 	pci_intx_for_msi(dev, 1);
 	dev->msix_enabled = 0;
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index a066284..de27c1c 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,11 +6,11 @@
 #ifndef MSI_H
 #define MSI_H
 
-#define PCI_MSIX_ENTRY_SIZE			16
-#define  PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
-#define  PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
-#define  PCI_MSIX_ENTRY_DATA_OFFSET		8
-#define  PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
 
 #define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
 #define msi_lower_address_reg(base)	(base + PCI_MSI_ADDRESS_LO)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6c93af5..dbd0f94 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1517,11 +1517,20 @@
  *
  * Perform INTx swizzling for a device behind one level of bridge.  This is
  * required by section 9.1 of the PCI-to-PCI bridge specification for devices
- * behind bridges on add-in cards.
+ * behind bridges on add-in cards.  For devices with ARI enabled, the slot
+ * number is always 0 (see the Implementation Note in section 2.2.8.1 of
+ * the PCI Express Base Specification, Revision 2.1)
  */
 u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
 {
-	return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+	int slot;
+
+	if (pci_ari_enabled(dev->bus))
+		slot = 0;
+	else
+		slot = PCI_SLOT(dev->devfn);
+
+	return (((pin - 1) + slot) % 4) + 1;
 }
 
 int
@@ -2171,7 +2180,7 @@
 	u16 ctrl;
 	struct pci_dev *pdev;
 
-	if (dev->subordinate)
+	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
 		return -ENOTTY;
 
 	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
index ece97df..a928d8a 100644
--- a/drivers/pci/pcie/aer/ecrc.c
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -106,7 +106,7 @@
 		disable_ecrc_checking(dev);
 		break;
 	case ECRC_POLICY_ON:
-		enable_ecrc_checking(dev);;
+		enable_ecrc_checking(dev);
 		break;
 	default:
 		return;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 56552d7..06b9656 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1058,6 +1058,11 @@
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+   occur when mode detecting */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
 
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index eddb074..8c02b6c 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -311,7 +311,7 @@
 #include <linux/pci_hotplug.h>
 /**
  * pci_hp_create_link - create symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
  *
  * Helper function for pci_hotplug_core.c to create symbolic link to
  * the hotplug driver module.
@@ -334,7 +334,7 @@
 
 /**
  * pci_hp_remove_link - remove symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
  *
  * Helper function for pci_hotplug_core.c to remove symbolic link to
  * the hotplug driver module.
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 9ad97ea..8eb0423 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -472,7 +472,8 @@
     init_timer(&poll_timer);
 
     /* Build interrupt mask */
-    printk(", %d sockets\n" KERN_INFO "  irq list (", sockets);
+    printk(KERN_CONT ", %d sockets\n", sockets);
+    printk(KERN_INFO "  irq list (");
     if (irq_list_count == 0)
 	mask = irq_mask;
     else
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 659421d0..d4ad50d 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -1,7 +1,7 @@
 /*
  * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
  *
- * Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -32,7 +32,7 @@
 #include "i82365.h"
 
 MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_LICENSE("GPL");
 
 #define CARD_MAX_SLOTS		2
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 812f038..9b3c158 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -6,7 +6,7 @@
  * 	NEC VRC4173 CARDU driver for Socket Services
  *	(This device doesn't support CardBus. it is supporting only 16bit PC Card.)
  *
- * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
@@ -41,7 +41,7 @@
 #include "vrc4173_cardu.h"
 
 MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_LICENSE("GPL");
 
 static int vrc4173_cardu_slots;
diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h
index 7d77c74..a7d9601 100644
--- a/drivers/pcmcia/vrc4173_cardu.h
+++ b/drivers/pcmcia/vrc4173_cardu.h
@@ -5,7 +5,7 @@
  * BRIEF MODULE DESCRIPTION
  *	Include file for NEC VRC4173 CARDU.
  *
- * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License as published by the
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 4ac2311..ca50856 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -171,7 +171,7 @@
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	unsigned long b = (unsigned long) data;
-	int query = BIT(b + 8) | ((!!blocked) << b);
+	int query = BIT(b + 8) | ((!blocked) << b);
 
 	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 32b2773..713f7bf 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -283,7 +283,7 @@
 
 	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
 	if (stat < 0)
-		return;
+		goto unlock;
 
 	if (stat & DS1374_REG_SR_AF) {
 		stat &= ~DS1374_REG_SR_AF;
@@ -302,7 +302,7 @@
 out:
 	if (!ds1374->exiting)
 		enable_irq(client->irq);
-
+unlock:
 	mutex_unlock(&ds1374->mutex);
 }
 
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index f11297a..2c839d0 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Real Time Clock unit.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
 MODULE_LICENSE("GPL v2");
 
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0471f880..4240b05 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2826,8 +2826,7 @@
 	 */
 
 	local_irq_restore(flags);
-	printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
-	       KERN_INFO "        before abortion\n", HOSTNO);
+	printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
 
 	/* Maybe it is sufficient just to release the ST-DMA lock... (if
 	 * possible at all) At least, we should check if the lock could be
diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild
index 25a2032..70d060b 100644
--- a/drivers/scsi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgb3i/Kbuild
@@ -1,4 +1,4 @@
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
 
 cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o
 obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 74369a3..c399f48 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
 
 #include <linux/inet.h>
 #include <linux/crypto.h>
+#include <linux/if_vlan.h>
 #include <net/dst.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
@@ -184,6 +185,9 @@
 	struct cxgb3i_adapter *snic;
 	int i;
 
+	if (ndev->priv_flags & IFF_802_1Q_VLAN)
+		ndev = vlan_dev_real_dev(ndev);
+
 	read_lock(&cxgb3i_snic_rwlock);
 	list_for_each_entry(snic, &cxgb3i_snic_list, list_head) {
 		for (i = 0; i < snic->hba_cnt; i++) {
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index a840728..2c266c0 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -473,16 +473,16 @@
 	 * limitation for the device.  Try 40-bit first, and
 	 * fail to 32-bit.
 	 */
-	err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
 	if (err) {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "No usable DMA configuration "
 				     "aborting\n");
 			goto err_out_release_regions;
 		}
-		err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Unable to obtain 32-bit DMA "
@@ -490,7 +490,7 @@
 			goto err_out_release_regions;
 		}
 	} else {
-		err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
 		if (err) {
 			shost_printk(KERN_ERR, fnic->lport->host,
 				     "Unable to obtain 40-bit DMA "
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index eabf365..bfc9969 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -245,7 +245,7 @@
 					  struct vnic_wq_copy *wq,
 					  struct fnic_io_req *io_req,
 					  struct scsi_cmnd *sc,
-					  u32 sg_count)
+					  int sg_count)
 {
 	struct scatterlist *sg;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
@@ -260,9 +260,6 @@
 	char msg[2];
 
 	if (sg_count) {
-		BUG_ON(sg_count < 0);
-		BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
-
 		/* For each SGE, create a device desc entry */
 		desc = io_req->sgl_list;
 		for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
@@ -344,7 +341,7 @@
 	struct fnic *fnic;
 	struct vnic_wq_copy *wq;
 	int ret;
-	u32 sg_count;
+	int sg_count;
 	unsigned long flags;
 	unsigned long ptr;
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 869a11b..9928704 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1095,9 +1095,14 @@
 				MAX_INDIRECT_BUFS);
 			hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
 		}
+
+		if (hostdata->madapter_info.os_type == 3) {
+			enable_fast_fail(hostdata);
+			return;
+		}
 	}
 
-	enable_fast_fail(hostdata);
+	send_srp_login(hostdata);
 }
 
 /**
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index b12ad7c..18735b3 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -75,8 +75,9 @@
 		int i;
 		printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
 		for (i = 0; i < cmd->cmd_len; ++i)
-			printk(" %.2x", cmd->cmnd[i]);
-		printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
+			printk(KERN_CONT " %.2x", cmd->cmnd[i]);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
 		       scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
 	}
 #endif
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2eee9e6..292c02f 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3670,13 +3670,14 @@
 fc_bsg_goose_queue(struct fc_rport *rport)
 {
 	int flagset;
+	unsigned long flags;
 
 	if (!rport->rqst_q)
 		return;
 
 	get_device(&rport->dev);
 
-	spin_lock(rport->rqst_q->queue_lock);
+	spin_lock_irqsave(rport->rqst_q->queue_lock, flags);
 	flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) &&
 		  !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
 	if (flagset)
@@ -3684,7 +3685,7 @@
 	__blk_run_queue(rport->rqst_q);
 	if (flagset)
 		queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
-	spin_unlock(rport->rqst_q->queue_lock);
+	spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
 
 	put_device(&rport->dev);
 }
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index ef142fd..4d6f2fe 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -619,7 +619,7 @@
 		if (strcmp(current->comm, cmd) && printk_ratelimit()) {
 			printk(KERN_WARNING
 			       "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
-			       "guessing data in;\n" KERN_WARNING "   "
+			       "guessing data in;\n   "
 			       "program %s not setting count and/or reply_len properly\n",
 			       old_hdr.reply_len - (int)SZ_SG_HEADER,
 			       input_size, (unsigned int) cmnd[0],
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index bcaba86..75da6e5 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2860,8 +2860,7 @@
  */
 
     local_irq_restore(flags);
-    printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
-           KERN_INFO "        before abortion\n", HOSTNO); 
+    printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); 
 
     return SCSI_ABORT_NOT_RUNNING;
 }
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 97f3158..27e84e4 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -134,7 +134,7 @@
 
 	host = ncr_attach(&zalon7xx_template, unit, &device);
 	if (!host)
-		goto fail;
+		return -ENODEV;
 
 	if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
 	  dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 6160e03..e7108e7 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -60,11 +60,12 @@
 
 static void moan_device(const char *str, struct pci_dev *dev)
 {
-	printk(KERN_WARNING "%s: %s\n"
-	       KERN_WARNING "Please send the output of lspci -vv, this\n"
-	       KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
-	       KERN_WARNING "manufacturer and name of serial board or\n"
-	       KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+	printk(KERN_WARNING
+	       "%s: %s\n"
+	       "Please send the output of lspci -vv, this\n"
+	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+	       "manufacturer and name of serial board or\n"
+	       "modem board to rmk+serial@arm.linux.org.uk.\n",
 	       pci_name(dev), str, dev->vendor, dev->device,
 	       dev->subsystem_vendor, dev->subsystem_device);
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f5267..8e2feb5 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -707,24 +707,25 @@
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-	unsigned short ssr_status, scr_status;
+	unsigned short ssr_status, scr_status, err_enabled;
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
 	ssr_status = sci_in(port, SCxSR);
 	scr_status = sci_in(port, SCSCR);
+	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
-	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
 		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
 		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	return ret;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0573f3b..dac550e 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Based on drivers/serial/8250.c, by Russell King.
  *
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3fd3e3b..3c6feed 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -49,29 +49,54 @@
 
 static inline u32 ssb_irqflag(struct ssb_device *dev)
 {
-	return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
+	if (tpsflag)
+		return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+	else
+		/* not irq supported */
+		return 0x3f;
+}
+
+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
+{
+	struct ssb_bus *bus = rdev->bus;
+	int i;
+	for (i = 0; i < bus->nr_devices; i++) {
+		struct ssb_device *dev;
+		dev = &(bus->devices[i]);
+		if (ssb_irqflag(dev) == irqflag)
+			return dev;
+	}
+	return NULL;
 }
 
 /* Get the MIPS IRQ assignment for a specified device.
  * If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
  */
 unsigned int ssb_mips_irq(struct ssb_device *dev)
 {
 	struct ssb_bus *bus = dev->bus;
+	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag;
 	u32 ipsflag;
 	u32 tmp;
 	unsigned int irq;
 
 	irqflag = ssb_irqflag(dev);
+	if (irqflag == 0x3f)
+		return 6;
 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
 	for (irq = 1; irq <= 4; irq++) {
 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
 		if (tmp == irqflag)
 			break;
 	}
-	if (irq	== 5)
-		irq = 0;
+	if (irq	== 5) {
+		if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
+			irq = 0;
+	}
 
 	return irq;
 }
@@ -97,25 +122,56 @@
 	struct ssb_device *mdev = bus->mipscore.dev;
 	u32 irqflag = ssb_irqflag(dev);
 
+	BUG_ON(oldirq == 6);
+
 	dev->irq = irq + 2;
 
-	ssb_dprintk(KERN_INFO PFX
-		    "set_irq: core 0x%04x, irq %d => %d\n",
-		    dev->id.coreid, oldirq, irq);
 	/* clear the old irq */
 	if (oldirq == 0)
 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-	else
+	else if (oldirq != 5)
 		clear_irq(bus, oldirq);
 
 	/* assign the new one */
 	if (irq == 0) {
 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
 	} else {
+		u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
+		if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
+			u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
+			struct ssb_device *olddev = find_device(dev, oldipsflag);
+			if (olddev)
+				set_irq(olddev, 0);
+		}
 		irqflag <<= ipsflag_irq_shift[irq];
-		irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 	}
+	ssb_dprintk(KERN_INFO PFX
+		    "set_irq: core 0x%04x, irq %d => %d\n",
+		    dev->id.coreid, oldirq+2, irq+2);
+}
+
+static void print_irq(struct ssb_device *dev, unsigned int irq)
+{
+	int i;
+	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+	ssb_dprintk(KERN_INFO PFX
+		"core 0x%04x, irq :", dev->id.coreid);
+	for (i = 0; i <= 6; i++) {
+		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+	}
+	ssb_dprintk("\n");
+}
+
+static void dump_irq(struct ssb_bus *bus)
+{
+	int i;
+	for (i = 0; i < bus->nr_devices; i++) {
+		struct ssb_device *dev;
+		dev = &(bus->devices[i]);
+		print_irq(dev, ssb_mips_irq(dev));
+	}
 }
 
 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
@@ -197,16 +253,23 @@
 
 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+		int mips_irq;
 		dev = &(bus->devices[i]);
-		dev->irq = ssb_mips_irq(dev) + 2;
+		mips_irq = ssb_mips_irq(dev);
+		if (mips_irq > 4)
+			dev->irq = 0;
+		else
+			dev->irq = mips_irq + 2;
+		if (dev->irq > 5)
+			continue;
 		switch (dev->id.coreid) {
 		case SSB_DEV_USB11_HOST:
 			/* shouldn't need a separate irq line for non-4710, most of them have a proper
 			 * external usb controller on the pci */
 			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
 				set_irq(dev, irq++);
-				break;
 			}
+			break;
 			/* fallthrough */
 		case SSB_DEV_PCI:
 		case SSB_DEV_ETHERNET:
@@ -220,6 +283,8 @@
 			}
 		}
 	}
+	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+	dump_irq(bus);
 
 	ssb_mips_serial_init(mcore);
 	ssb_mips_flash_detect(mcore);
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index fbfadba..100e7a5 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -583,7 +583,7 @@
 			ssb_printk(".");
 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
 		if (err) {
-			ssb_printk("\n" KERN_NOTICE PFX
+			ssb_printk(KERN_NOTICE PFX
 				   "Failed to write to SPROM.\n");
 			failed = 1;
 			break;
@@ -591,7 +591,7 @@
 	}
 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
 	if (err) {
-		ssb_printk("\n" KERN_NOTICE PFX
+		ssb_printk(KERN_NOTICE PFX
 			   "Could not disable SPROM write access.\n");
 		failed = 1;
 	}
@@ -678,7 +678,8 @@
 			sprom->board_rev = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+				      (tuple.TupleDataLen != 10),
 				      "pa tpl size");
 			sprom->pa0b0 = tuple.TupleData[1] |
 				 ((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@
 			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+				      (tuple.TupleDataLen != 5),
 				      "bfl tpl size");
 			sprom->boardflags_lo = tuple.TupleData[1] |
 					 ((u16)tuple.TupleData[2] << 8);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ce3f453..95ccfa0 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -648,7 +648,7 @@
 	struct urb	*urb;
 	int		length;
 	unsigned long	flags;
-	char		buffer[4];	/* Any root hubs with > 31 ports? */
+	char		buffer[6];	/* Any root hubs with > 31 ports? */
 
 	if (unlikely(!hcd->rh_registered))
 		return;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1576a05..0c03471 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -337,10 +337,10 @@
 
 config SUPERH_ON_CHIP_R8A66597
 	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
 	help
 	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366 and SH7723 processors.
+	   SH7366, SH7723 and SH7724 processors.
 
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index f8d9045..0f7a30b 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1261,7 +1261,7 @@
 			return -ENOMEM;
 		}
 		map[n].ptr = (unsigned char *) vaddr;
-		map[n].pg = virt_to_page(vaddr);
+		map[n].pg = virt_to_page((void *) vaddr);
 	}
 	return 0;
 }
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d6d65ef..8afcf08 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -616,6 +616,8 @@
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select STI_CONSOLE
+	select VT
 	default y
 	---help---
 	  STI refers to the HP "Standard Text Interface" which is a set of
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index fb8163d..a21efcd 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -226,9 +226,10 @@
 	clcdfb_enable(fb, regs.cntl);
 
 #ifdef DEBUG
-	printk(KERN_INFO "CLCD: Registers set to\n"
-	       KERN_INFO "  %08x %08x %08x %08x\n"
-	       KERN_INFO "  %08x %08x %08x %08x\n",
+	printk(KERN_INFO
+	       "CLCD: Registers set to\n"
+	       "  %08x %08x %08x %08x\n"
+	       "  %08x %08x %08x %08x\n",
 		readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
 		readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
 		readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 497ff8a..8cd279b 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2405,6 +2405,9 @@
 	return 0;
 }
 
+/* fbhw->encode_fix() must be called with fb_info->mm_lock held
+ * if it is called after the register_framebuffer() - not a case here
+ */
 static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
 {
 	struct atafb_par par;
@@ -2414,9 +2417,7 @@
 	if (err)
 		return err;
 	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	mutex_lock(&info->mm_lock);
 	err = fbhw->encode_fix(fix, &par);
-	mutex_unlock(&info->mm_lock);
 	return err;
 }
 
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index cb88394..da05f08 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -261,6 +261,9 @@
 /**
  *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
  *	@sinfo: the frame buffer to allocate memory for
+ * 	
+ * 	This function is called only from the atmel_lcdfb_probe()
+ * 	so no locking by fb_info->mm_lock around smem_len setting is needed.
  */
 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
@@ -270,9 +273,7 @@
 
 	smem_len = (var->xres_virtual * var->yres_virtual
 		    * ((var->bits_per_pixel + 7) / 8));
-	mutex_lock(&info->mm_lock);
 	info->fix.smem_len = max(smem_len, sinfo->smem_len);
-	mutex_unlock(&info->mm_lock);
 
 	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 7bad24e..108b89e 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt server LCD frame buffer driver.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 0bf2190..72d68b3 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -1223,12 +1223,6 @@
 		return -EINVAL;
 	}
 
-	if (fsl_diu_set_par(info)) {
-		printk(KERN_ERR "fb_set_par failed");
-		fb_dealloc_cmap(&info->cmap);
-		return -EINVAL;
-	}
-
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "register_framebuffer failed");
 		unmap_video_memory(info);
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 020db7f..e7116a6 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -44,9 +44,6 @@
 	.accel		= FB_ACCEL_NONE,
 };
 
-static u32 pseudo_palette[16];
-static struct fb_info fb_info;
-
 static inline void hitfb_accel_wait(void)
 {
 	while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
@@ -331,6 +328,8 @@
 static int __init hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
+	struct fb_info *info;
+	int ret;
 
 	if (fb_get_options("hitfb", NULL))
 		return -ENODEV;
@@ -384,32 +383,53 @@
 		break;
 	}
 
-	fb_info.fbops = &hitfb_ops;
-	fb_info.var = hitfb_var;
-	fb_info.fix = hitfb_fix;
-	fb_info.pseudo_palette = pseudo_palette;
-	fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+	info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+	if (unlikely(!info))
+		return -ENOMEM;
+
+	info->fbops = &hitfb_ops;
+	info->var = hitfb_var;
+	info->fix = hitfb_fix;
+	info->pseudo_palette = info->par;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
 		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
 
-	fb_info.screen_base = (void *)hitfb_fix.smem_start;
+	info->screen_base = (void *)hitfb_fix.smem_start;
 
-	fb_alloc_cmap(&fb_info.cmap, 256, 0);
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (unlikely(ret < 0))
+		goto err_fb;
 
-	if (register_framebuffer(&fb_info) < 0)
-		return -EINVAL;
+	ret = register_framebuffer(info);
+	if (unlikely(ret < 0))
+		goto err;
+
+	platform_set_drvdata(dev, info);
 
 	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-	       fb_info.node, fb_info.fix.id);
+	       info->node, info->fix.id);
+
 	return 0;
+
+err:
+	fb_dealloc_cmap(&info->cmap);
+err_fb:
+	framebuffer_release(info);
+	return ret;
 }
 
 static int __exit hitfb_remove(struct platform_device *dev)
 {
-	return unregister_framebuffer(&fb_info);
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	unregister_framebuffer(info);
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+
+	return 0;
 }
 
-#ifdef CONFIG_PM
-static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+static int hitfb_suspend(struct device *dev)
 {
 	u16 v;
 
@@ -421,7 +441,7 @@
 	return 0;
 }
 
-static int hitfb_resume(struct platform_device *dev)
+static int hitfb_resume(struct device *dev)
 {
 	u16 v;
 
@@ -435,17 +455,19 @@
 
 	return 0;
 }
-#endif
+
+static struct dev_pm_ops hitfb_dev_pm_ops = {
+	.suspend	= hitfb_suspend,
+	.resume		= hitfb_resume,
+};
 
 static struct platform_driver hitfb_driver = {
 	.probe		= hitfb_probe,
 	.remove		= __exit_p(hitfb_remove),
-#ifdef CONFIG_PM
-	.suspend	= hitfb_suspend,
-	.resume		= hitfb_resume,
-#endif
 	.driver		= {
 		.name	= "hitfb",
+		.owner	= THIS_MODULE,
+		.pm	= &hitfb_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 7196067..5743ea2 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -2060,8 +2060,7 @@
 
 	fb_var_to_videomode(&mode, &info->var);
 	fb_add_videomode(&mode, &info->modelist);
-	encode_fix(&info->fix, info); 
-	 	    
+
 	i810fb_init_ringbuffer(info);
 	err = register_framebuffer(info);
 
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c
index 0ce3b0a..a74e5da 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/matrox/matroxfb_DAC1064.c
@@ -454,9 +454,9 @@
 	dprintk(KERN_DEBUG "DAC1064regs ");
 	for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) {
 		dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]);
-		if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+		if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
 	}
-	dprintk("\n" KERN_DEBUG "DAC1064clk ");
+	dprintk(KERN_DEBUG "DAC1064clk ");
 	for (i = 0; i < 6; i++)
 		dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]);
 	dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 1352482..4e82511 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -651,9 +651,9 @@
 	dprintk(KERN_DEBUG "3026DACregs ");
 	for (i = 0; i < 21; i++) {
 		dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]);
-		if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+		if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
 	}
-	dprintk("\n" KERN_DEBUG "DACclk ");
+	dprintk(KERN_DEBUG "DACclk ");
 	for (i = 0; i < 6; i++)
 		dprintk("C%02X=%02X ", i, hw->DACclk[i]);
 	dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 59c3a2e..0c1049b 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -1876,7 +1876,6 @@
 	}
 	matroxfb_init_fix(PMINFO2);
 	ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase));
-	matroxfb_update_fix(PMINFO2);
 	/* Normalize values (namely yres_virtual) */
 	matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon));
 	/* And put it into "current" var. Do NOT program hardware yet, or we'll not take over
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index 909e10a..ebcb5c6 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -289,16 +289,18 @@
 #undef m2info
 }
 
+/*
+ * This function is called before the register_framebuffer so
+ * no locking is needed.
+ */
 static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info)
 {
 	struct fb_fix_screeninfo *fix = &m2info->fbcon.fix;
 
 	strcpy(fix->id, "MATROX DH");
 
-	mutex_lock(&m2info->fbcon.mm_lock);
 	fix->smem_start = m2info->video.base;
 	fix->smem_len = m2info->video.len_usable;
-	mutex_unlock(&m2info->fbcon.mm_lock);
 	fix->ypanstep = 1;
 	fix->ywrapstep = 0;
 	fix->xpanstep = 8;	/* TBD */
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 43680e5..bb63c07 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,23 +211,21 @@
 
 /**
  * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
+ * @id: window id.
  * @sfb: The hardware state.
  * @pixclock: The pixel clock wanted, in picoseconds.
  *
  * Given the specified pixel clock, work out the necessary divider to get
  * close to the output frequency.
  */
-static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
 {
+	struct s3c_fb_pd_win *win = sfb->pdata->win[id];
 	unsigned long clk = clk_get_rate(sfb->bus_clk);
-	unsigned long long tmp;
 	unsigned int result;
 
-	tmp = (unsigned long long)clk;
-	tmp *= pixclk;
-
-	do_div(tmp, 1000000000UL);
-	result = (unsigned int)tmp / 1000;
+	pixclk *= win->win_mode.refresh;
+	result = clk / pixclk;
 
 	dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
 		pixclk, clk, result, clk / result);
@@ -267,6 +265,7 @@
 	struct s3c_fb *sfb = win->parent;
 	void __iomem *regs = sfb->regs;
 	int win_no = win->index;
+	u32 osdc_data = 0;
 	u32 data;
 	u32 pagewidth;
 	int clkdiv;
@@ -302,7 +301,7 @@
 	/* use window 0 as the basis for the lcd output timings */
 
 	if (win_no == 0) {
-		clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
+		clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
 
 		data = sfb->pdata->vidcon0;
 		data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
@@ -359,8 +358,6 @@
 
 	data = var->xres * var->yres;
 
-	u32 osdc_data = 0;
-
 	osdc_data = VIDISD14C_ALPHA1_R(0xf) |
 		VIDISD14C_ALPHA1_G(0xf) |
 		VIDISD14C_ALPHA1_B(0xf);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f10d2fb..8f24564 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/vmalloc.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/atomic.h>
 
@@ -30,9 +31,10 @@
 	unsigned long enabled; /* ME and SE in LDCNT2R */
 	struct sh_mobile_lcdc_chan_cfg cfg;
 	u32 pseudo_palette[PALETTE_NR];
-	struct fb_info info;
+	struct fb_info *info;
 	dma_addr_t dma_handle;
 	struct fb_deferred_io defio;
+	struct scatterlist *sglist;
 	unsigned long frame_end;
 	wait_queue_head_t frame_end_wait;
 };
@@ -206,16 +208,38 @@
 static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
 #endif
 
+static int sh_mobile_lcdc_sginit(struct fb_info *info,
+				  struct list_head *pagelist)
+{
+	struct sh_mobile_lcdc_chan *ch = info->par;
+	unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT;
+	struct page *page;
+	int nr_pages = 0;
+
+	sg_init_table(ch->sglist, nr_pages_max);
+
+	list_for_each_entry(page, pagelist, lru)
+		sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0);
+
+	return nr_pages;
+}
+
 static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 				       struct list_head *pagelist)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
+	unsigned int nr_pages;
 
 	/* enable clocks before accessing hardware */
 	sh_mobile_lcdc_clk_on(ch->lcdc);
 
+	nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
+	dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+
 	/* trigger panel update */
 	lcdc_write_chan(ch, LDSM2R, 1);
+
+	dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 }
 
 static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
@@ -418,22 +442,22 @@
 		/* set bpp format in PKF[4:0] */
 		tmp = lcdc_read_chan(ch, LDDFR);
 		tmp &= ~(0x0001001f);
-		tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+		tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
 		lcdc_write_chan(ch, LDDFR, tmp);
 
 		/* point out our frame buffer */
-		lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+		lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
 
 		/* set line size */
-		lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+		lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
 
 		/* setup deferred io if SYS bus */
 		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
 		if (ch->ldmt1r_value & (1 << 12) && tmp) {
 			ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
 			ch->defio.delay = msecs_to_jiffies(tmp);
-			ch->info.fbdefio = &ch->defio;
-			fb_deferred_io_init(&ch->info);
+			ch->info->fbdefio = &ch->defio;
+			fb_deferred_io_init(ch->info);
 
 			/* one-shot mode */
 			lcdc_write_chan(ch, LDSM1R, 1);
@@ -479,12 +503,12 @@
 		 * flush frame, and wait for frame end interrupt
 		 * clean up deferred io and enable clock
 		 */
-		if (ch->info.fbdefio) {
+		if (ch->info->fbdefio) {
 			ch->frame_end = 0;
-			schedule_delayed_work(&ch->info.deferred_work, 0);
+			schedule_delayed_work(&ch->info->deferred_work, 0);
 			wait_event(ch->frame_end_wait, ch->frame_end);
-			fb_deferred_io_cleanup(&ch->info);
-			ch->info.fbdefio = NULL;
+			fb_deferred_io_cleanup(ch->info);
+			ch->info->fbdefio = NULL;
 			sh_mobile_lcdc_clk_on(priv);
 		}
 
@@ -793,9 +817,16 @@
 	priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
 
 	for (i = 0; i < j; i++) {
-		info = &priv->ch[i].info;
 		cfg = &priv->ch[i].cfg;
 
+		priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
+		if (!priv->ch[i].info) {
+			dev_err(&pdev->dev, "unable to allocate fb_info\n");
+			error = -ENOMEM;
+			break;
+		}
+
+		info = priv->ch[i].info;
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
@@ -846,21 +877,31 @@
 	}
 
 	for (i = 0; i < j; i++) {
-		error = register_framebuffer(&priv->ch[i].info);
+		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+
+		info = ch->info;
+
+		if (info->fbdefio) {
+			priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+					info->fix.smem_len >> PAGE_SHIFT);
+			if (!priv->ch->sglist) {
+				dev_err(&pdev->dev, "cannot allocate sglist\n");
+				goto err1;
+			}
+		}
+
+		error = register_framebuffer(info);
 		if (error < 0)
 			goto err1;
-	}
 
-	for (i = 0; i < j; i++) {
-		info = &priv->ch[i].info;
 		dev_info(info->dev,
 			 "registered %s/%s as %dx%d %dbpp.\n",
 			 pdev->name,
-			 (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ?
+			 (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
 			 "mainlcd" : "sublcd",
-			 (int) priv->ch[i].cfg.lcd_cfg.xres,
-			 (int) priv->ch[i].cfg.lcd_cfg.yres,
-			 priv->ch[i].cfg.bpp);
+			 (int) ch->cfg.lcd_cfg.xres,
+			 (int) ch->cfg.lcd_cfg.yres,
+			 ch->cfg.bpp);
 
 		/* deferred io mode: disable clock to save power */
 		if (info->fbdefio)
@@ -881,20 +922,24 @@
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
-		if (priv->ch[i].info.dev)
-			unregister_framebuffer(&priv->ch[i].info);
+		if (priv->ch[i].info->dev)
+			unregister_framebuffer(priv->ch[i].info);
 
 	sh_mobile_lcdc_stop(priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
-		info = &priv->ch[i].info;
+		info = priv->ch[i].info;
 
-		if (!info->device)
+		if (!info || !info->device)
 			continue;
 
+		if (priv->ch[i].sglist)
+			vfree(priv->ch[i].sglist);
+
 		dma_free_coherent(&pdev->dev, info->fix.smem_len,
 				  info->screen_base, priv->ch[i].dma_handle);
 		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
 	}
 
 #ifdef CONFIG_HAVE_CLK
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index fd33455..4a067f0 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -6367,7 +6367,6 @@
 		sis_fb_info->fix = ivideo->sisfb_fix;
 		sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset;
 		sis_fb_info->fbops = &sisfb_ops;
-		sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info);
 		sis_fb_info->pseudo_palette = ivideo->pseudo_palette;
 
 		fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 98f24f0..16d4f4c 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -1624,6 +1624,8 @@
 	if (!fbi)
 		return 0;
 
+	mutex_init(&info->fb[head]->mm_lock);
+
 	ret = sm501fb_init_fb(info->fb[head], head, drvname);
 	if (ret) {
 		dev_err(info->dev, "cannot initialise fb %s\n", drvname);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eec9dcb..6120f0c 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1115,10 +1115,9 @@
 		  if the device name contains the string "DX" and tell the
 		  user how to reconfigure the card. */
 		if (strstr(sti->outptr.dev_name, "DX")) {
-		   printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
-			"support '%s' in double-buffer mode.\n"
-			KERN_WARNING "WARNING: Please disable the double-buffer mode "
-			"in IPL menu (the PARISC-BIOS).\n",
+		   printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
 			sti->outptr.dev_name);
 		   goto out_err0;
 		}
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 8a141c2..2376f68 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -748,8 +748,6 @@
 		goto out;
 	}
 
-	w100fb_set_par(info);
-
 	if (register_framebuffer(info) < 0) {
 		err = -EINVAL;
 		goto out;
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
index f654221..a9efb16 100644
--- a/drivers/vlynq/Kconfig
+++ b/drivers/vlynq/Kconfig
@@ -13,7 +13,7 @@
 
 config VLYNQ_DEBUG
 	bool "VLYNQ bus debug"
-	depends on VLYNQ && KERNEL_DEBUG
+	depends on VLYNQ && DEBUG_KERNEL
 	help
 	  Turn on VLYNQ bus debugging.
 
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
index 7335433..f05d2a3 100644
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -76,7 +76,7 @@
 	u32 int_device[8];
 };
 
-#ifdef VLYNQ_DEBUG
+#ifdef CONFIG_VLYNQ_DEBUG
 static void vlynq_dump_regs(struct vlynq_device *dev)
 {
 	int i;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 891d2e9..abad71b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -927,9 +927,9 @@
 void __init xen_init_IRQ(void)
 {
 	int i;
-	size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s);
 
-	cpu_evtchn_mask_p = alloc_bootmem(size);
+	cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
+				    GFP_KERNEL);
 	BUG_ON(cpu_evtchn_mask_p == NULL);
 
 	init_evtchn_cpu_bindings();
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index c52be53..5ffb570 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -17,7 +17,6 @@
 #include <linux/pagemap.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
-#include <linux/mnt_namespace.h>
 #include "internal.h"
 
 
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 7f88628..6e4f6c5 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -299,8 +299,8 @@
 					   "btrfs-%s-%d", workers->name,
 					   workers->num_workers + i);
 		if (IS_ERR(worker->task)) {
-			kfree(worker);
 			ret = PTR_ERR(worker->task);
+			kfree(worker);
 			goto fail;
 		}
 
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2779c2f..98a8738 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2074,8 +2074,7 @@
 int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
 int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
 int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
-			*root);
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref);
 int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root,
 			struct extent_buffer *node,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index edc7d20..a5aca39 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -990,15 +990,13 @@
 	return type;
 }
 
-static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+static int find_next_key(struct btrfs_path *path, int level,
+			 struct btrfs_key *key)
 
 {
-	int level;
-	BUG_ON(!path->keep_locks);
-	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+	for (; level < BTRFS_MAX_LEVEL; level++) {
 		if (!path->nodes[level])
 			break;
-		btrfs_assert_tree_locked(path->nodes[level]);
 		if (path->slots[level] + 1 >=
 		    btrfs_header_nritems(path->nodes[level]))
 			continue;
@@ -1158,7 +1156,8 @@
 		 * For simplicity, we just do not add new inline back
 		 * ref if there is any kind of item for this block
 		 */
-		if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+		if (find_next_key(path, 0, &key) == 0 &&
+		    key.objectid == bytenr &&
 		    key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
 			err = -EAGAIN;
 			goto out;
@@ -2697,7 +2696,7 @@
 
 		printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
 		       ", %llu bytes_used, %llu bytes_reserved, "
-		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
 		       "%llu total\n", (unsigned long long)bytes,
 		       (unsigned long long)data_sinfo->bytes_delalloc,
 		       (unsigned long long)data_sinfo->bytes_used,
@@ -4128,6 +4127,7 @@
 	return buf;
 }
 
+#if 0
 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root, struct extent_buffer *leaf)
 {
@@ -4171,8 +4171,6 @@
 	return 0;
 }
 
-#if 0
-
 static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
 					struct btrfs_leaf_ref *ref)
@@ -4553,262 +4551,471 @@
 }
 #endif
 
+struct walk_control {
+	u64 refs[BTRFS_MAX_LEVEL];
+	u64 flags[BTRFS_MAX_LEVEL];
+	struct btrfs_key update_progress;
+	int stage;
+	int level;
+	int shared_level;
+	int update_ref;
+	int keep_locks;
+};
+
+#define DROP_REFERENCE	1
+#define UPDATE_BACKREF	2
+
 /*
- * helper function for drop_subtree, this function is similar to
- * walk_down_tree. The main difference is that it checks reference
- * counts while tree blocks are locked.
+ * hepler to process tree block while walking down the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block. if the block is shared and
+ * we need update back refs for the subtree rooted at the
+ * block, this function changes wc->stage to UPDATE_BACKREF
+ *
+ * when wc->stage == UPDATE_BACKREF, this function updates
+ * back refs for pointers in the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
  */
+static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
+				   struct btrfs_root *root,
+				   struct btrfs_path *path,
+				   struct walk_control *wc)
+{
+	int level = wc->level;
+	struct extent_buffer *eb = path->nodes[level];
+	struct btrfs_key key;
+	u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+	int ret;
+
+	if (wc->stage == UPDATE_BACKREF &&
+	    btrfs_header_owner(eb) != root->root_key.objectid)
+		return 1;
+
+	/*
+	 * when reference count of tree block is 1, it won't increase
+	 * again. once full backref flag is set, we never clear it.
+	 */
+	if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+	    (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+		BUG_ON(!path->locks[level]);
+		ret = btrfs_lookup_extent_info(trans, root,
+					       eb->start, eb->len,
+					       &wc->refs[level],
+					       &wc->flags[level]);
+		BUG_ON(ret);
+		BUG_ON(wc->refs[level] == 0);
+	}
+
+	if (wc->stage == DROP_REFERENCE &&
+	    wc->update_ref && wc->refs[level] > 1) {
+		BUG_ON(eb == root->node);
+		BUG_ON(path->slots[level] > 0);
+		if (level == 0)
+			btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
+		else
+			btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
+		if (btrfs_header_owner(eb) == root->root_key.objectid &&
+		    btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
+			wc->stage = UPDATE_BACKREF;
+			wc->shared_level = level;
+		}
+	}
+
+	if (wc->stage == DROP_REFERENCE) {
+		if (wc->refs[level] > 1)
+			return 1;
+
+		if (path->locks[level] && !wc->keep_locks) {
+			btrfs_tree_unlock(eb);
+			path->locks[level] = 0;
+		}
+		return 0;
+	}
+
+	/* wc->stage == UPDATE_BACKREF */
+	if (!(wc->flags[level] & flag)) {
+		BUG_ON(!path->locks[level]);
+		ret = btrfs_inc_ref(trans, root, eb, 1);
+		BUG_ON(ret);
+		ret = btrfs_dec_ref(trans, root, eb, 0);
+		BUG_ON(ret);
+		ret = btrfs_set_disk_extent_flags(trans, root, eb->start,
+						  eb->len, flag, 0);
+		BUG_ON(ret);
+		wc->flags[level] |= flag;
+	}
+
+	/*
+	 * the block is shared by multiple trees, so it's not good to
+	 * keep the tree lock
+	 */
+	if (path->locks[level] && level > 0) {
+		btrfs_tree_unlock(eb);
+		path->locks[level] = 0;
+	}
+	return 0;
+}
+
+/*
+ * hepler to process tree block while walking up the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function drops
+ * reference count on the block.
+ *
+ * when wc->stage == UPDATE_BACKREF, this function changes
+ * wc->stage back to DROP_REFERENCE if we changed wc->stage
+ * to UPDATE_BACKREF previously while processing the block.
+ *
+ * NOTE: return value 1 means we should stop walking up.
+ */
+static noinline int walk_up_proc(struct btrfs_trans_handle *trans,
+				 struct btrfs_root *root,
+				 struct btrfs_path *path,
+				 struct walk_control *wc)
+{
+	int ret = 0;
+	int level = wc->level;
+	struct extent_buffer *eb = path->nodes[level];
+	u64 parent = 0;
+
+	if (wc->stage == UPDATE_BACKREF) {
+		BUG_ON(wc->shared_level < level);
+		if (level < wc->shared_level)
+			goto out;
+
+		BUG_ON(wc->refs[level] <= 1);
+		ret = find_next_key(path, level + 1, &wc->update_progress);
+		if (ret > 0)
+			wc->update_ref = 0;
+
+		wc->stage = DROP_REFERENCE;
+		wc->shared_level = -1;
+		path->slots[level] = 0;
+
+		/*
+		 * check reference count again if the block isn't locked.
+		 * we should start walking down the tree again if reference
+		 * count is one.
+		 */
+		if (!path->locks[level]) {
+			BUG_ON(level == 0);
+			btrfs_tree_lock(eb);
+			btrfs_set_lock_blocking(eb);
+			path->locks[level] = 1;
+
+			ret = btrfs_lookup_extent_info(trans, root,
+						       eb->start, eb->len,
+						       &wc->refs[level],
+						       &wc->flags[level]);
+			BUG_ON(ret);
+			BUG_ON(wc->refs[level] == 0);
+			if (wc->refs[level] == 1) {
+				btrfs_tree_unlock(eb);
+				path->locks[level] = 0;
+				return 1;
+			}
+		} else {
+			BUG_ON(level != 0);
+		}
+	}
+
+	/* wc->stage == DROP_REFERENCE */
+	BUG_ON(wc->refs[level] > 1 && !path->locks[level]);
+
+	if (wc->refs[level] == 1) {
+		if (level == 0) {
+			if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+				ret = btrfs_dec_ref(trans, root, eb, 1);
+			else
+				ret = btrfs_dec_ref(trans, root, eb, 0);
+			BUG_ON(ret);
+		}
+		/* make block locked assertion in clean_tree_block happy */
+		if (!path->locks[level] &&
+		    btrfs_header_generation(eb) == trans->transid) {
+			btrfs_tree_lock(eb);
+			btrfs_set_lock_blocking(eb);
+			path->locks[level] = 1;
+		}
+		clean_tree_block(trans, root, eb);
+	}
+
+	if (eb == root->node) {
+		if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+			parent = eb->start;
+		else
+			BUG_ON(root->root_key.objectid !=
+			       btrfs_header_owner(eb));
+	} else {
+		if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+			parent = path->nodes[level + 1]->start;
+		else
+			BUG_ON(root->root_key.objectid !=
+			       btrfs_header_owner(path->nodes[level + 1]));
+	}
+
+	ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent,
+				root->root_key.objectid, level, 0);
+	BUG_ON(ret);
+out:
+	wc->refs[level] = 0;
+	wc->flags[level] = 0;
+	return ret;
+}
+
 static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root,
-				   struct btrfs_path *path, int *level)
+				   struct btrfs_path *path,
+				   struct walk_control *wc)
 {
 	struct extent_buffer *next;
 	struct extent_buffer *cur;
-	struct extent_buffer *parent;
 	u64 bytenr;
 	u64 ptr_gen;
-	u64 refs;
-	u64 flags;
 	u32 blocksize;
+	int level = wc->level;
 	int ret;
 
-	cur = path->nodes[*level];
-	ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
-				       &refs, &flags);
-	BUG_ON(ret);
-	if (refs > 1)
-		goto out;
+	while (level >= 0) {
+		cur = path->nodes[level];
+		BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
 
-	BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
-	while (*level >= 0) {
-		cur = path->nodes[*level];
-		if (*level == 0) {
-			ret = btrfs_drop_leaf_ref(trans, root, cur);
-			BUG_ON(ret);
-			clean_tree_block(trans, root, cur);
+		ret = walk_down_proc(trans, root, path, wc);
+		if (ret > 0)
 			break;
-		}
-		if (path->slots[*level] >= btrfs_header_nritems(cur)) {
-			clean_tree_block(trans, root, cur);
-			break;
-		}
 
-		bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
-		blocksize = btrfs_level_size(root, *level - 1);
-		ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
+		if (level == 0)
+			break;
+
+		bytenr = btrfs_node_blockptr(cur, path->slots[level]);
+		blocksize = btrfs_level_size(root, level - 1);
+		ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
 
 		next = read_tree_block(root, bytenr, blocksize, ptr_gen);
 		btrfs_tree_lock(next);
 		btrfs_set_lock_blocking(next);
 
-		ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
-					       &refs, &flags);
-		BUG_ON(ret);
-		if (refs > 1) {
-			parent = path->nodes[*level];
-			ret = btrfs_free_extent(trans, root, bytenr,
-						blocksize, parent->start,
-						btrfs_header_owner(parent),
-						*level - 1, 0);
-			BUG_ON(ret);
-			path->slots[*level]++;
-			btrfs_tree_unlock(next);
-			free_extent_buffer(next);
-			continue;
-		}
-
-		BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
-		*level = btrfs_header_level(next);
-		path->nodes[*level] = next;
-		path->slots[*level] = 0;
-		path->locks[*level] = 1;
-		cond_resched();
+		level--;
+		BUG_ON(level != btrfs_header_level(next));
+		path->nodes[level] = next;
+		path->slots[level] = 0;
+		path->locks[level] = 1;
+		wc->level = level;
 	}
-out:
-	if (path->nodes[*level] == root->node)
-		parent = path->nodes[*level];
-	else
-		parent = path->nodes[*level + 1];
-	bytenr = path->nodes[*level]->start;
-	blocksize = path->nodes[*level]->len;
-
-	ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
-				btrfs_header_owner(parent), *level, 0);
-	BUG_ON(ret);
-
-	if (path->locks[*level]) {
-		btrfs_tree_unlock(path->nodes[*level]);
-		path->locks[*level] = 0;
-	}
-	free_extent_buffer(path->nodes[*level]);
-	path->nodes[*level] = NULL;
-	*level += 1;
-	cond_resched();
 	return 0;
 }
 
-/*
- * helper for dropping snapshots.  This walks back up the tree in the path
- * to find the first node higher up where we haven't yet gone through
- * all the slots
- */
 static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct btrfs_path *path,
-				 int *level, int max_level)
+				 struct walk_control *wc, int max_level)
 {
-	struct btrfs_root_item *root_item = &root->root_item;
-	int i;
-	int slot;
+	int level = wc->level;
 	int ret;
 
-	for (i = *level; i < max_level && path->nodes[i]; i++) {
-		slot = path->slots[i];
-		if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
-			/*
-			 * there is more work to do in this level.
-			 * Update the drop_progress marker to reflect
-			 * the work we've done so far, and then bump
-			 * the slot number
-			 */
-			path->slots[i]++;
-			WARN_ON(*level == 0);
-			if (max_level == BTRFS_MAX_LEVEL) {
-				btrfs_node_key(path->nodes[i],
-					       &root_item->drop_progress,
-					       path->slots[i]);
-				root_item->drop_level = i;
-			}
-			*level = i;
+	path->slots[level] = btrfs_header_nritems(path->nodes[level]);
+	while (level < max_level && path->nodes[level]) {
+		wc->level = level;
+		if (path->slots[level] + 1 <
+		    btrfs_header_nritems(path->nodes[level])) {
+			path->slots[level]++;
 			return 0;
 		} else {
-			struct extent_buffer *parent;
+			ret = walk_up_proc(trans, root, path, wc);
+			if (ret > 0)
+				return 0;
 
-			/*
-			 * this whole node is done, free our reference
-			 * on it and go up one level
-			 */
-			if (path->nodes[*level] == root->node)
-				parent = path->nodes[*level];
-			else
-				parent = path->nodes[*level + 1];
-
-			clean_tree_block(trans, root, path->nodes[i]);
-			ret = btrfs_free_extent(trans, root,
-						path->nodes[i]->start,
-						path->nodes[i]->len,
-						parent->start,
-						btrfs_header_owner(parent),
-						*level, 0);
-			BUG_ON(ret);
-			if (path->locks[*level]) {
-				btrfs_tree_unlock(path->nodes[i]);
-				path->locks[i] = 0;
+			if (path->locks[level]) {
+				btrfs_tree_unlock(path->nodes[level]);
+				path->locks[level] = 0;
 			}
-			free_extent_buffer(path->nodes[i]);
-			path->nodes[i] = NULL;
-			*level = i + 1;
+			free_extent_buffer(path->nodes[level]);
+			path->nodes[level] = NULL;
+			level++;
 		}
 	}
 	return 1;
 }
 
 /*
- * drop the reference count on the tree rooted at 'snap'.  This traverses
- * the tree freeing any blocks that have a ref count of zero after being
- * decremented.
+ * drop a subvolume tree.
+ *
+ * this function traverses the tree freeing any blocks that only
+ * referenced by the tree.
+ *
+ * when a shared tree block is found. this function decreases its
+ * reference count by one. if update_ref is true, this function
+ * also make sure backrefs for the shared block and all lower level
+ * blocks are properly updated.
  */
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
-			*root)
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref)
 {
-	int ret = 0;
-	int wret;
-	int level;
 	struct btrfs_path *path;
-	int update_count;
+	struct btrfs_trans_handle *trans;
+	struct btrfs_root *tree_root = root->fs_info->tree_root;
 	struct btrfs_root_item *root_item = &root->root_item;
+	struct walk_control *wc;
+	struct btrfs_key key;
+	int err = 0;
+	int ret;
+	int level;
 
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
-	level = btrfs_header_level(root->node);
+	wc = kzalloc(sizeof(*wc), GFP_NOFS);
+	BUG_ON(!wc);
+
+	trans = btrfs_start_transaction(tree_root, 1);
+
 	if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+		level = btrfs_header_level(root->node);
 		path->nodes[level] = btrfs_lock_root_node(root);
 		btrfs_set_lock_blocking(path->nodes[level]);
 		path->slots[level] = 0;
 		path->locks[level] = 1;
+		memset(&wc->update_progress, 0,
+		       sizeof(wc->update_progress));
 	} else {
-		struct btrfs_key key;
-		struct btrfs_disk_key found_key;
-		struct extent_buffer *node;
-
 		btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+		memcpy(&wc->update_progress, &key,
+		       sizeof(wc->update_progress));
+
 		level = root_item->drop_level;
+		BUG_ON(level == 0);
 		path->lowest_level = level;
-		wret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-		if (wret < 0) {
-			ret = wret;
+		ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+		path->lowest_level = 0;
+		if (ret < 0) {
+			err = ret;
 			goto out;
 		}
-		node = path->nodes[level];
-		btrfs_node_key(node, &found_key, path->slots[level]);
-		WARN_ON(memcmp(&found_key, &root_item->drop_progress,
-			       sizeof(found_key)));
+		btrfs_node_key_to_cpu(path->nodes[level], &key,
+				      path->slots[level]);
+		WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+
 		/*
 		 * unlock our path, this is safe because only this
 		 * function is allowed to delete this snapshot
 		 */
 		btrfs_unlock_up_safe(path, 0);
-	}
-	while (1) {
-		unsigned long update;
-		wret = walk_down_tree(trans, root, path, &level);
-		if (wret > 0)
-			break;
-		if (wret < 0)
-			ret = wret;
 
-		wret = walk_up_tree(trans, root, path, &level,
-				    BTRFS_MAX_LEVEL);
-		if (wret > 0)
-			break;
-		if (wret < 0)
-			ret = wret;
-		if (trans->transaction->in_commit ||
-		    trans->transaction->delayed_refs.flushing) {
-			ret = -EAGAIN;
+		level = btrfs_header_level(root->node);
+		while (1) {
+			btrfs_tree_lock(path->nodes[level]);
+			btrfs_set_lock_blocking(path->nodes[level]);
+
+			ret = btrfs_lookup_extent_info(trans, root,
+						path->nodes[level]->start,
+						path->nodes[level]->len,
+						&wc->refs[level],
+						&wc->flags[level]);
+			BUG_ON(ret);
+			BUG_ON(wc->refs[level] == 0);
+
+			if (level == root_item->drop_level)
+				break;
+
+			btrfs_tree_unlock(path->nodes[level]);
+			WARN_ON(wc->refs[level] != 1);
+			level--;
+		}
+	}
+
+	wc->level = level;
+	wc->shared_level = -1;
+	wc->stage = DROP_REFERENCE;
+	wc->update_ref = update_ref;
+	wc->keep_locks = 0;
+
+	while (1) {
+		ret = walk_down_tree(trans, root, path, wc);
+		if (ret < 0) {
+			err = ret;
 			break;
 		}
-		for (update_count = 0; update_count < 16; update_count++) {
+
+		ret = walk_up_tree(trans, root, path, wc, BTRFS_MAX_LEVEL);
+		if (ret < 0) {
+			err = ret;
+			break;
+		}
+
+		if (ret > 0) {
+			BUG_ON(wc->stage != DROP_REFERENCE);
+			break;
+		}
+
+		if (wc->stage == DROP_REFERENCE) {
+			level = wc->level;
+			btrfs_node_key(path->nodes[level],
+				       &root_item->drop_progress,
+				       path->slots[level]);
+			root_item->drop_level = level;
+		}
+
+		BUG_ON(wc->level == 0);
+		if (trans->transaction->in_commit ||
+		    trans->transaction->delayed_refs.flushing) {
+			ret = btrfs_update_root(trans, tree_root,
+						&root->root_key,
+						root_item);
+			BUG_ON(ret);
+
+			btrfs_end_transaction(trans, tree_root);
+			trans = btrfs_start_transaction(tree_root, 1);
+		} else {
+			unsigned long update;
 			update = trans->delayed_ref_updates;
 			trans->delayed_ref_updates = 0;
 			if (update)
-				btrfs_run_delayed_refs(trans, root, update);
-			else
-				break;
+				btrfs_run_delayed_refs(trans, tree_root,
+						       update);
 		}
 	}
+	btrfs_release_path(root, path);
+	BUG_ON(err);
+
+	ret = btrfs_del_root(trans, tree_root, &root->root_key);
+	BUG_ON(ret);
+
+	free_extent_buffer(root->node);
+	free_extent_buffer(root->commit_root);
+	kfree(root);
 out:
+	btrfs_end_transaction(trans, tree_root);
+	kfree(wc);
 	btrfs_free_path(path);
-	return ret;
+	return err;
 }
 
+/*
+ * drop subtree rooted at tree block 'node'.
+ *
+ * NOTE: this function will unlock and release tree block 'node'
+ */
 int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
 			struct btrfs_root *root,
 			struct extent_buffer *node,
 			struct extent_buffer *parent)
 {
 	struct btrfs_path *path;
+	struct walk_control *wc;
 	int level;
 	int parent_level;
 	int ret = 0;
 	int wret;
 
+	BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
+	wc = kzalloc(sizeof(*wc), GFP_NOFS);
+	BUG_ON(!wc);
+
 	btrfs_assert_tree_locked(parent);
 	parent_level = btrfs_header_level(parent);
 	extent_buffer_get(parent);
@@ -4817,24 +5024,33 @@
 
 	btrfs_assert_tree_locked(node);
 	level = btrfs_header_level(node);
-	extent_buffer_get(node);
 	path->nodes[level] = node;
 	path->slots[level] = 0;
+	path->locks[level] = 1;
+
+	wc->refs[parent_level] = 1;
+	wc->flags[parent_level] = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+	wc->level = level;
+	wc->shared_level = -1;
+	wc->stage = DROP_REFERENCE;
+	wc->update_ref = 0;
+	wc->keep_locks = 1;
 
 	while (1) {
-		wret = walk_down_tree(trans, root, path, &level);
-		if (wret < 0)
+		wret = walk_down_tree(trans, root, path, wc);
+		if (wret < 0) {
 			ret = wret;
-		if (wret != 0)
 			break;
+		}
 
-		wret = walk_up_tree(trans, root, path, &level, parent_level);
+		wret = walk_up_tree(trans, root, path, wc, parent_level);
 		if (wret < 0)
 			ret = wret;
 		if (wret != 0)
 			break;
 	}
 
+	kfree(wc);
 	btrfs_free_path(path);
 	return ret;
 }
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 126477e..7c3cd24 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -151,7 +151,10 @@
 	}
 	if (end_pos > isize) {
 		i_size_write(inode, end_pos);
-		btrfs_update_inode(trans, root, inode);
+		/* we've only changed i_size in ram, and we haven't updated
+		 * the disk i_size.  There is no need to log the inode
+		 * at this time.
+		 */
 	}
 	err = btrfs_end_transaction(trans, root);
 out_unlock:
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index dbe1aab..7ffa3d3 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3580,12 +3580,6 @@
 		owner = 1;
 	BTRFS_I(inode)->block_group =
 			btrfs_find_block_group(root, 0, alloc_hint, owner);
-	if ((mode & S_IFREG)) {
-		if (btrfs_test_opt(root, NODATASUM))
-			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
-		if (btrfs_test_opt(root, NODATACOW))
-			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
-	}
 
 	key[0].objectid = objectid;
 	btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY);
@@ -3640,6 +3634,13 @@
 
 	btrfs_inherit_iflags(inode, dir);
 
+	if ((mode & S_IFREG)) {
+		if (btrfs_test_opt(root, NODATASUM))
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
+		if (btrfs_test_opt(root, NODATACOW))
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
+	}
+
 	insert_inode_hash(inode);
 	inode_tree_add(inode);
 	return inode;
@@ -5082,6 +5083,7 @@
 	u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
 	struct extent_map *em;
 	struct btrfs_trans_handle *trans;
+	struct btrfs_root *root;
 	int ret;
 
 	alloc_start = offset & ~mask;
@@ -5100,6 +5102,13 @@
 			goto out;
 	}
 
+	root = BTRFS_I(inode)->root;
+
+	ret = btrfs_check_data_free_space(root, inode,
+					  alloc_end - alloc_start);
+	if (ret)
+		goto out;
+
 	locked_end = alloc_end - 1;
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
@@ -5107,7 +5116,7 @@
 		trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
 		if (!trans) {
 			ret = -EIO;
-			goto out;
+			goto out_free;
 		}
 
 		/* the extent lock is ordered inside the running
@@ -5168,6 +5177,8 @@
 		      GFP_NOFS);
 
 	btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+out_free:
+	btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start);
 out:
 	mutex_unlock(&inode->i_mutex);
 	return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index eff18f5..9f4db84 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1028,7 +1028,8 @@
 						struct btrfs_file_extent_item);
 			comp = btrfs_file_extent_compression(leaf, extent);
 			type = btrfs_file_extent_type(leaf, extent);
-			if (type == BTRFS_FILE_EXTENT_REG) {
+			if (type == BTRFS_FILE_EXTENT_REG ||
+			    type == BTRFS_FILE_EXTENT_PREALLOC) {
 				disko = btrfs_file_extent_disk_bytenr(leaf,
 								      extent);
 				diskl = btrfs_file_extent_disk_num_bytes(leaf,
@@ -1051,7 +1052,8 @@
 			new_key.objectid = inode->i_ino;
 			new_key.offset = key.offset + destoff - off;
 
-			if (type == BTRFS_FILE_EXTENT_REG) {
+			if (type == BTRFS_FILE_EXTENT_REG ||
+			    type == BTRFS_FILE_EXTENT_PREALLOC) {
 				ret = btrfs_insert_empty_item(trans, root, path,
 							      &new_key, size);
 				if (ret)
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b23dc20..0083979 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1788,7 +1788,7 @@
 		btrfs_end_transaction(trans, root);
 	}
 
-	btrfs_drop_dead_root(reloc_root);
+	btrfs_drop_snapshot(reloc_root, 0);
 
 	if (atomic_dec_and_test(async->num_pending))
 		complete(async->done);
@@ -2075,9 +2075,6 @@
 
 			ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
 			BUG_ON(ret);
-
-			btrfs_tree_unlock(eb);
-			free_extent_buffer(eb);
 		}
 		if (!lowest) {
 			btrfs_tree_unlock(upper->eb);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 4e83457..2dbf1c1 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -593,6 +593,7 @@
 	return 0;
 }
 
+#if 0
 /*
  * when dropping snapshots, we generate a ton of delayed refs, and it makes
  * sense not to join the transaction while it is trying to flush the current
@@ -681,6 +682,7 @@
 	btrfs_btree_balance_dirty(tree_root, nr);
 	return ret;
 }
+#endif
 
 /*
  * new snapshots need to be created at a very specific time in the
@@ -1081,7 +1083,7 @@
 	while (!list_empty(&list)) {
 		root = list_entry(list.next, struct btrfs_root, root_list);
 		list_del_init(&root->root_list);
-		btrfs_drop_dead_root(root);
+		btrfs_drop_snapshot(root, 0);
 	}
 	return 0;
 }
diff --git a/fs/compat.c b/fs/compat.c
index cdd51a3..fbadb94 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1486,8 +1486,8 @@
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
-	if (retval < 0)
+	retval = -ERESTARTNOINTR;
+	if (mutex_lock_interruptible(&current->cred_guard_mutex))
 		goto out_free;
 	current->in_execve = 1;
 
diff --git a/fs/exec.c b/fs/exec.c
index e639957..4a8849e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1277,8 +1277,8 @@
 	if (!bprm)
 		goto out_files;
 
-	retval = mutex_lock_interruptible(&current->cred_guard_mutex);
-	if (retval < 0)
+	retval = -ERESTARTNOINTR;
+	if (mutex_lock_interruptible(&current->cred_guard_mutex))
 		goto out_free;
 	current->in_execve = 1;
 
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index a024474..b47679b 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -270,19 +270,21 @@
 	D2({
 		int i=0;
 		struct jffs2_raw_node_ref *this;
-		printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG);
+		printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
 
 		this = ic->nodes;
 
+		printk(KERN_DEBUG);
 		while(this) {
-			printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this));
+			printk(KERN_CONT "0x%08x(%d)->",
+			       ref_offset(this), ref_flags(this));
 			if (++i == 5) {
-				printk("\n" KERN_DEBUG);
+				printk(KERN_DEBUG);
 				i=0;
 			}
 			this = this->next_in_ino;
 		}
-		printk("\n");
+		printk(KERN_CONT "\n");
 	});
 
 	switch (ic->class) {
diff --git a/fs/namespace.c b/fs/namespace.c
index 3dc283f..277c28a 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -22,6 +22,7 @@
 #include <linux/seq_file.h>
 #include <linux/mnt_namespace.h>
 #include <linux/namei.h>
+#include <linux/nsproxy.h>
 #include <linux/security.h>
 #include <linux/mount.h>
 #include <linux/ramfs.h>
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 46177cb..b35d2a6 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -30,7 +30,6 @@
 #include <linux/nfs_idmap.h>
 #include <linux/vfs.h>
 #include <linux/namei.h>
-#include <linux/mnt_namespace.h>
 #include <linux/security.h>
 
 #include <asm/system.h>
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 4145083..23341c1 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -678,7 +678,6 @@
 nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
 			int access, struct file **filp)
 {
-	const struct cred *cred = current_cred();
 	struct dentry	*dentry;
 	struct inode	*inode;
 	int		flags = O_RDONLY|O_LARGEFILE;
@@ -733,7 +732,7 @@
 		vfs_dq_init(inode);
 	}
 	*filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt),
-			    flags, cred);
+			    flags, current_cred());
 	if (IS_ERR(*filp))
 		host_err = PTR_ERR(*filp);
 	else
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff231ad..ff27a29 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -296,12 +296,15 @@
 static int inotify_release(struct inode *ignored, struct file *file)
 {
 	struct fsnotify_group *group = file->private_data;
+	struct user_struct *user = group->inotify_data.user;
 
 	fsnotify_clear_marks_by_group(group);
 
 	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
 	fsnotify_put_group(group);
 
+	atomic_dec(&user->inotify_devs);
+
 	return 0;
 }
 
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 607c579..70f36c0 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2042,8 +2042,8 @@
 		 * changes */
 		invalidate_bdev(sb->s_bdev);
 	}
-	mutex_lock(&inode->i_mutex);
 	mutex_lock(&dqopt->dqonoff_mutex);
+	mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 	if (sb_has_quota_loaded(sb, type)) {
 		error = -EBUSY;
 		goto out_lock;
@@ -2094,7 +2094,6 @@
 	dqopt->files[type] = NULL;
 	iput(inode);
 out_lock:
-	mutex_unlock(&dqopt->dqonoff_mutex);
 	if (oldflags != -1) {
 		down_write(&dqopt->dqptr_sem);
 		/* Set the flags back (in the case of accidental quotaon()
@@ -2104,6 +2103,7 @@
 		up_write(&dqopt->dqptr_sem);
 	}
 	mutex_unlock(&inode->i_mutex);
+	mutex_unlock(&dqopt->dqonoff_mutex);
 out_fmt:
 	put_quota_format(fmt);
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d3aeb06..7adea74 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -24,7 +24,6 @@
 #include <linux/exportfs.h>
 #include <linux/quotaops.h>
 #include <linux/vfs.h>
-#include <linux/mnt_namespace.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
diff --git a/fs/sync.c b/fs/sync.c
index dd20002..3422ba6 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -112,8 +112,13 @@
 	mutex_unlock(&mutex);
 }
 
+/*
+ * sync everything.  Start out by waking pdflush, because that writes back
+ * all queues in parallel.
+ */
 SYSCALL_DEFINE0(sync)
 {
+	wakeup_pdflush(0);
 	sync_filesystems(0);
 	sync_filesystems(1);
 	if (unlikely(laptop_mode))
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 9345806..2524714 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -171,6 +171,7 @@
 	if (count > 0)
 		*off = offs + count;
 
+	kfree(temp);
 	return count;
 }
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index dccdbed..a553f10 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -191,7 +191,7 @@
 	. = ALIGN(align);						\
 	*(.data.cacheline_aligned)
 
-#define INIT_TASK(align)						\
+#define INIT_TASK_DATA(align)						\
 	. = ALIGN(align);						\
 	*(.data.init_task)
 
@@ -434,10 +434,10 @@
 /*
  * Init task
  */
-#define INIT_TASK_DATA(align)						\
+#define INIT_TASK_DATA_SECTION(align)					\
 	. = ALIGN(align);						\
 	.data.init_task : {						\
-		INIT_TASK						\
+		INIT_TASK_DATA(align)					\
 	}
 
 #ifdef CONFIG_CONSTRUCTORS
@@ -705,15 +705,15 @@
  * matches the requirment of PAGE_ALIGNED_DATA.
  *
  * use 0 as page_align if page_aligned data is not used */
-#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask)	\
+#define RW_DATA_SECTION(cacheline, pagealigned, inittask)		\
 	. = ALIGN(PAGE_SIZE);						\
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
-		INIT_TASK(inittask)					\
+		INIT_TASK_DATA(inittask)				\
 		CACHELINE_ALIGNED_DATA(cacheline)			\
 		READ_MOSTLY_DATA(cacheline)				\
 		DATA_DATA						\
 		CONSTRUCTORS						\
-		NOSAVE_DATA(nosave)					\
+		NOSAVE_DATA						\
 		PAGE_ALIGNED_DATA(pagealigned)				\
 	}
 
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 7605c5e..00d6a68 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -122,9 +122,10 @@
 
 static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
 {
-#ifdef ELF_CORE_COPY_TASK_REGS
-	
+#if defined (ELF_CORE_COPY_TASK_REGS)
 	return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#elif defined (task_pt_regs)
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
 #endif
 	return 0;
 }
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 9823946..192d1e43 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -127,6 +127,7 @@
 	struct delayed_work work;
 	int bm_retries;
 	int bm_generation;
+	__be32 bm_transaction_data[2];
 
 	bool broadcast_channel_allocated;
 	u32 broadcast_channel;
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a187..70fdba2 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
 #define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
 #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 5368fbd..7fc01b1 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -183,5 +183,8 @@
 	LIST_HEAD_INIT(cpu_timers[2]),					\
 }
 
+/* Attach to the init_task data structure for proper alignment */
+#define __init_task_data __attribute__((__section__(".data.init_task")))
+
 
 #endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 0000000..7964516
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,65 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define MATRIX_MAX_ROWS		16
+#define MATRIX_MAX_COLS		16
+
+#define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+				 (val & 0xffff))
+
+#define KEY_ROW(k)		(((k) >> 24) & 0xff)
+#define KEY_COL(k)		(((k) >> 16) & 0xff)
+#define KEY_VAL(k)		((k) & 0xffff)
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ *	representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ * @max_keymap_size: maximum size of keymap supported by the device
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+	const uint32_t *keymap;
+	unsigned int	keymap_size;
+	unsigned int	max_keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: array of gpio numbers reporesenting rows
+ * @col_gpios: array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ *	needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	unsigned int	row_gpios[MATRIX_MAX_ROWS];
+	unsigned int	col_gpios[MATRIX_MAX_COLS];
+	unsigned int	num_row_gpios;
+	unsigned int	num_col_gpios;
+
+	unsigned int	col_scan_delay_us;
+
+	/* key debounce interval in milli-second */
+	unsigned int	debounce_ms;
+
+	bool		active_low;
+	bool		wakeup;
+};
+
+#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index fee9e59..691f591 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -22,6 +22,15 @@
 #define __page_aligned_bss	__section(.bss.page_aligned) __aligned(PAGE_SIZE)
 
 /*
+ * For assembly routines.
+ *
+ * Note when using these that you must specify the appropriate
+ * alignment directives yourself
+ */
+#define __PAGE_ALIGNED_DATA	.section ".data.page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS	.section ".bss.page_aligned", "aw"
+
+/*
  * This is used by architectures to keep arguments on the stack
  * untouched by the compiler by keeping them live until the end.
  * The argument stack may be owned by the assembly-language
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
index 3beb259..d74785c 100644
--- a/include/linux/mnt_namespace.h
+++ b/include/linux/mnt_namespace.h
@@ -2,10 +2,9 @@
 #define _NAMESPACE_H_
 #ifdef __KERNEL__
 
-#include <linux/mount.h>
-#include <linux/sched.h>
-#include <linux/nsproxy.h>
+#include <linux/path.h>
 #include <linux/seq_file.h>
+#include <linux/wait.h>
 
 struct mnt_namespace {
 	atomic_t		count;
@@ -28,14 +27,6 @@
 extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
 		struct fs_struct *);
 extern void put_mnt_ns(struct mnt_namespace *ns);
-
-static inline void exit_mnt_ns(struct task_struct *p)
-{
-	struct mnt_namespace *ns = p->nsproxy->mnt_ns;
-	if (ns)
-		put_mnt_ns(ns);
-}
-
 static inline void get_mnt_ns(struct mnt_namespace *ns)
 {
 	atomic_inc(&ns->count);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d304ddf..115fb7b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1145,7 +1145,7 @@
 /* If you want to know what to call your pci_dev, ask this function.
  * Again, it's a wrapper around the generic device.
  */
-static inline const char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(const struct pci_dev *pdev)
 {
 	return dev_name(&pdev->dev);
 }
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e73e242..2ce2983 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -99,7 +99,6 @@
 #undef RFKILL_STATE_UNBLOCKED
 #undef RFKILL_STATE_HARD_BLOCKED
 
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 252b245..4be57ab 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -132,6 +132,11 @@
 #endif /*__raw_spin_is_contended*/
 #endif
 
+/* The lock does not imply full memory barrier. */
+#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
+static inline void smp_mb__after_lock(void) { smp_mb(); }
+#endif
+
 /**
  * spin_unlock_wait - wait until the spinlock gets unlocked
  * @lock: the spinlock in question.
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 98a1d8c..99adcdc 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -14,6 +14,8 @@
 #ifndef _LINUX_SYSRQ_H
 #define _LINUX_SYSRQ_H
 
+#include <linux/errno.h>
+
 struct pt_regs;
 struct tty_struct;
 
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8a025d5..95846d9 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -318,6 +318,8 @@
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
 #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
 #define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+
 /*
  * 10bit raw bayer, expanded to 16 bits
  * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 4d7e227..11a4a2d 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -155,6 +155,9 @@
 	/* module cafe_ccic, just ident 8801 */
 	V4L2_IDENT_CAFE = 8801,
 
+	/* module mt9v011, just ident 8243 */
+	V4L2_IDENT_MT9V011 = 8243,
+
 	/* module tw9910: just ident 9910 */
 	V4L2_IDENT_TW9910 = 9910,
 
diff --git a/include/net/sock.h b/include/net/sock.h
index 352f06bb..2c0da92 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -54,6 +54,7 @@
 
 #include <linux/filter.h>
 #include <linux/rculist_nulls.h>
+#include <linux/poll.h>
 
 #include <asm/atomic.h>
 #include <net/dst.h>
@@ -1241,6 +1242,74 @@
 	return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
 }
 
+/**
+ * sk_has_sleeper - check if there are any waiting processes
+ * @sk: socket
+ *
+ * Returns true if socket has waiting processes
+ *
+ * The purpose of the sk_has_sleeper and sock_poll_wait is to wrap the memory
+ * barrier call. They were added due to the race found within the tcp code.
+ *
+ * Consider following tcp code paths:
+ *
+ * CPU1                  CPU2
+ *
+ * sys_select            receive packet
+ *   ...                 ...
+ *   __add_wait_queue    update tp->rcv_nxt
+ *   ...                 ...
+ *   tp->rcv_nxt check   sock_def_readable
+ *   ...                 {
+ *   schedule               ...
+ *                          if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ *                              wake_up_interruptible(sk->sk_sleep)
+ *                          ...
+ *                       }
+ *
+ * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay
+ * in its cache, and so does the tp->rcv_nxt update on CPU2 side.  The CPU1
+ * could then endup calling schedule and sleep forever if there are no more
+ * data on the socket.
+ *
+ * The sk_has_sleeper is always called right after a call to read_lock, so we
+ * can use smp_mb__after_lock barrier.
+ */
+static inline int sk_has_sleeper(struct sock *sk)
+{
+	/*
+	 * We need to be sure we are in sync with the
+	 * add_wait_queue modifications to the wait queue.
+	 *
+	 * This memory barrier is paired in the sock_poll_wait.
+	 */
+	smp_mb__after_lock();
+	return sk->sk_sleep && waitqueue_active(sk->sk_sleep);
+}
+
+/**
+ * sock_poll_wait - place memory barrier behind the poll_wait call.
+ * @filp:           file
+ * @wait_address:   socket wait queue
+ * @p:              poll_table
+ *
+ * See the comments in the sk_has_sleeper function.
+ */
+static inline void sock_poll_wait(struct file *filp,
+		wait_queue_head_t *wait_address, poll_table *p)
+{
+	if (p && wait_address) {
+		poll_wait(filp, wait_address, p);
+		/*
+		 * We need to be sure we are in sync with the
+		 * socket flags modification.
+		 *
+		 * This memory barrier is paired in the sk_has_sleeper.
+		*/
+		smp_mb();
+	}
+}
+
 /*
  * 	Queue a received datagram if it will fit. Stream and sequenced
  *	protocols can't normally use this as they need to fit buffers in
diff --git a/kernel/exit.c b/kernel/exit.c
index 628d41f..869dc22 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -12,7 +12,6 @@
 #include <linux/completion.h>
 #include <linux/personality.h>
 #include <linux/tty.h>
-#include <linux/mnt_namespace.h>
 #include <linux/iocontext.h>
 #include <linux/key.h>
 #include <linux/security.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 467746b..bd29592 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -17,7 +17,6 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/completion.h>
-#include <linux/mnt_namespace.h>
 #include <linux/personality.h>
 #include <linux/mempolicy.h>
 #include <linux/sem.h>
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 7e95bed..385c31a 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -24,7 +24,6 @@
 #include <linux/unistd.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/mnt_namespace.h>
 #include <linux/completion.h>
 #include <linux/file.h>
 #include <linux/fdtable.h>
diff --git a/kernel/module.c b/kernel/module.c
index 38928fc..0a04983 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2451,9 +2451,9 @@
 		return ret;
 	}
 	if (ret > 0) {
-		printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
-				    "it should follow 0/-E convention\n"
-		       KERN_WARNING "%s: loading module anyway...\n",
+		printk(KERN_WARNING
+"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n"
+"%s: loading module anyway...\n",
 		       __func__, mod->name, ret,
 		       __func__);
 		dump_stack();
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index d55a50d..a641eb7 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -2020,7 +2020,7 @@
 
 static void perf_mmap_free_page(unsigned long addr)
 {
-	struct page *page = virt_to_page(addr);
+	struct page *page = virt_to_page((void *)addr);
 
 	page->mapping = NULL;
 	__free_page(page);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 61c78b2..082c320 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -181,8 +181,8 @@
 	 * interference; SUID, SGID and LSM creds get determined differently
 	 * under ptrace.
 	 */
-	retval = mutex_lock_interruptible(&task->cred_guard_mutex);
-	if (retval < 0)
+	retval = -ERESTARTNOINTR;
+	if (mutex_lock_interruptible(&task->cred_guard_mutex))
 		goto out;
 
 	task_lock(task);
diff --git a/mm/filemap.c b/mm/filemap.c
index 2239671..ccea3b6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2272,6 +2272,7 @@
 		pagefault_enable();
 		flush_dcache_page(page);
 
+		mark_page_accessed(page);
 		status = a_ops->write_end(file, mapping, pos, bytes, copied,
 						page, fsdata);
 		if (unlikely(status < 0))
diff --git a/mm/nommu.c b/mm/nommu.c
index bf0cc76..53cab10 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -238,6 +238,27 @@
 }
 EXPORT_SYMBOL(get_user_pages);
 
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn)
+{
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		return -EINVAL;
+
+	*pfn = address >> PAGE_SHIFT;
+	return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
 DEFINE_RWLOCK(vmlist_lock);
 struct vm_struct *vmlist;
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e0f2cdf..ad7cd1c 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1983,7 +1983,7 @@
 		unsigned long alloc_end = addr + (PAGE_SIZE << order);
 		unsigned long used = addr + PAGE_ALIGN(size);
 
-		split_page(virt_to_page(addr), order);
+		split_page(virt_to_page((void *)addr), order);
 		while (used < alloc_end) {
 			free_page(used);
 			used += PAGE_SIZE;
diff --git a/mm/slab.c b/mm/slab.c
index e74a16e..7b5d4de 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1544,9 +1544,6 @@
 	}
 
 	g_cpucache_up = EARLY;
-
-	/* Annotate slab for lockdep -- annotate the malloc caches */
-	init_lock_keys();
 }
 
 void __init kmem_cache_init_late(void)
@@ -1563,6 +1560,9 @@
 	/* Done! */
 	g_cpucache_up = FULL;
 
+	/* Annotate slab for lockdep -- annotate the malloc caches */
+	init_lock_keys();
+
 	/*
 	 * Register a cpu startup notifier callback that initializes
 	 * cpu_cache_get for all new cpus
@@ -2547,7 +2547,7 @@
 	}
 
 	if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
-		synchronize_rcu();
+		rcu_barrier();
 
 	__kmem_cache_destroy(cachep);
 	mutex_unlock(&cache_chain_mutex);
diff --git a/mm/slob.c b/mm/slob.c
index c78742d..9641da3 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -595,6 +595,8 @@
 void kmem_cache_destroy(struct kmem_cache *c)
 {
 	kmemleak_free(c);
+	if (c->flags & SLAB_DESTROY_BY_RCU)
+		rcu_barrier();
 	slob_free(c, sizeof(struct kmem_cache));
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/slub.c b/mm/slub.c
index 819f056..a9201d8 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2595,6 +2595,8 @@
  */
 void kmem_cache_destroy(struct kmem_cache *s)
 {
+	if (s->flags & SLAB_DESTROY_BY_RCU)
+		rcu_barrier();
 	down_write(&slub_lock);
 	s->refcount--;
 	if (!s->refcount) {
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814..8c2588e 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -735,12 +735,14 @@
 		if (!*p)
 			continue;
 		token = match_token(p, tokens, args);
-		r = match_int(&args[0], &option);
-		if (r < 0) {
-			P9_DPRINTK(P9_DEBUG_ERROR,
-			 "integer field, but no integer?\n");
-			ret = r;
-			continue;
+		if (token != Opt_err) {
+			r = match_int(&args[0], &option);
+			if (r < 0) {
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				"integer field, but no integer?\n");
+				ret = r;
+				continue;
+			}
 		}
 		switch (token) {
 		case Opt_port:
diff --git a/net/atm/common.c b/net/atm/common.c
index c1c9793..8c4d843 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -92,7 +92,7 @@
 static void vcc_def_wakeup(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up(sk->sk_sleep);
 	read_unlock(&sk->sk_callback_lock);
 }
@@ -110,7 +110,7 @@
 	read_lock(&sk->sk_callback_lock);
 
 	if (vcc_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible(sk->sk_sleep);
 
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
@@ -594,7 +594,7 @@
 	struct atm_vcc *vcc;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	vcc = ATM_SD(sock);
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 58abee1..b0fe692 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -712,7 +712,7 @@
 	struct sock *sk = sock->sk;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 9675f31..df30feb 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -740,7 +740,7 @@
 				       np->name);
 				break;
 			}
-			cond_resched();
+			msleep(1);
 		}
 
 		/* If carrier appears to come up instantly, we don't
diff --git a/net/core/sock.c b/net/core/sock.c
index b0ba569..6354863 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1715,7 +1715,7 @@
 static void sock_def_wakeup(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_all(sk->sk_sleep);
 	read_unlock(&sk->sk_callback_lock);
 }
@@ -1723,7 +1723,7 @@
 static void sock_def_error_report(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_poll(sk->sk_sleep, POLLERR);
 	sk_wake_async(sk, SOCK_WAKE_IO, POLL_ERR);
 	read_unlock(&sk->sk_callback_lock);
@@ -1732,7 +1732,7 @@
 static void sock_def_readable(struct sock *sk, int len)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN |
 						POLLRDNORM | POLLRDBAND);
 	sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
@@ -1747,7 +1747,7 @@
 	 * progress.  --DaveM
 	 */
 	if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible_sync_poll(sk->sk_sleep, POLLOUT |
 						POLLWRNORM | POLLWRBAND);
 
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c0e88c1..c96119f 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -196,7 +196,7 @@
 {
 	read_lock(&sk->sk_callback_lock);
 
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible(sk->sk_sleep);
 	/* Should agree with poll, otherwise some programs break */
 	if (sock_writeable(sk))
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 314a1b5..94ca8ea 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -311,7 +311,7 @@
 	unsigned int mask;
 	struct sock *sk = sock->sk;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	if (sk->sk_state == DCCP_LISTEN)
 		return inet_csk_listen_poll(sk);
 
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5..efe661a 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@
 	int i;
 
 	for (i = 0; i < 10; i++) {
-		ret = REG_READ(REG_GLOBAL2, 0x1d);
+		ret = REG_READ(REG_GLOBAL, 0x1d);
 		if ((ret & 0x8000) == 0)
 			return 0;
 	}
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 00a54b2..63c2fa7 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -316,8 +316,8 @@
 
 static const int halve_threshold = 25;
 static const int inflate_threshold = 50;
-static const int halve_threshold_root = 8;
-static const int inflate_threshold_root = 15;
+static const int halve_threshold_root = 15;
+static const int inflate_threshold_root = 25;
 
 
 static void __alias_free_mem(struct rcu_head *head)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 7870a53..9114524 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -339,7 +339,7 @@
 	struct sock *sk = sock->sk;
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	if (sk->sk_state == TCP_LISTEN)
 		return inet_csk_listen_poll(sk);
 
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c..0071ee6 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+			if (xprth + 4 < skb->data ||
+			    pskb_may_pull(skb, xprth + 4 - skb->data)) {
 				__be16 *ports = (__be16 *)xprth;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3883b40..43b3c9f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@
 					update_lft = 1;
 				else if (stored_lft <= MIN_VALID_LIFETIME) {
 					/* valid_lft <= stored_lft is always true */
-					/* XXX: IPsec */
-					update_lft = 0;
+					/*
+					 * RFC 4862 Section 5.5.3e:
+					 * "Note that the preferred lifetime of
+					 *  the corresponding address is always
+					 *  reset to the Preferred Lifetime in
+					 *  the received Prefix Information
+					 *  option, regardless of whether the
+					 *  valid lifetime is also reset or
+					 *  ignored."
+					 *
+					 *  So if the preferred lifetime in
+					 *  this advertisement is different
+					 *  than what we have stored, but the
+					 *  valid lifetime is invalid, just
+					 *  reset prefered_lft.
+					 *
+					 *  We must set the valid lifetime
+					 *  to the stored lifetime since we'll
+					 *  be updating the timestamp below,
+					 *  else we'll set it back to the
+					 *  minumum.
+					 */
+					if (prefered_lft != ifp->prefered_lft) {
+						valid_lft = stored_lft;
+						update_lft = 1;
+					}
 				} else {
 					valid_lft = MIN_VALID_LIFETIME;
 					if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@
 				spin_unlock(&ifp->lock);
 				continue;
 			} else if (age >= ifp->prefered_lft) {
-				/* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+				/* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
 				int deprecate = 0;
 
 				if (!(ifp->flags&IFA_F_DEPRECATED)) {
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a4..3a3c677 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@
 	ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
 	ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
 
-	while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+	while (nh + offset + 1 < skb->data ||
+	       pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
 		nh = skb_network_header(skb);
 		exthdr = (struct ipv6_opt_hdr *)(nh + offset);
 
@@ -177,7 +178,8 @@
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+			if (!onlyproto && (nh + offset + 4 < skb->data ||
+			     pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
 				__be16 *ports = (__be16 *)exthdr;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 6be5f92..49c15b4 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -306,7 +306,7 @@
 static void iucv_sock_wake_msglim(struct sock *sk)
 {
 	read_lock(&sk->sk_callback_lock);
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+	if (sk_has_sleeper(sk))
 		wake_up_interruptible_all(sk->sk_sleep);
 	sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	read_unlock(&sk->sk_callback_lock);
@@ -1256,7 +1256,7 @@
 	struct sock *sk = sock->sk;
 	unsigned int mask = 0;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 
 	if (sk->sk_state == IUCV_LISTEN)
 		return iucv_accept_poll(sk);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 003cb47..f49ef28 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -637,7 +637,7 @@
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_preq_queue *preq_node;
 
-	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
+	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
 		printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
 		return;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index b218b98..37771ab 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -66,7 +66,7 @@
 	for (i = rix; i >= 0; i--)
 		if (mi->r[i].rix == rix)
 			break;
-	WARN_ON(mi->r[i].rix != rix);
+	WARN_ON(i < 0);
 	return i;
 }
 
@@ -181,6 +181,9 @@
 			break;
 
 		ndx = rix_to_ndx(mi, ar[i].idx);
+		if (ndx < 0)
+			continue;
+
 		mi->r[ndx].attempts += ar[i].count;
 
 		if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index eac5e7b..bfe493e 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -63,7 +63,7 @@
 	_enter("%p", sk);
 	read_lock(&sk->sk_callback_lock);
 	if (rxrpc_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible(sk->sk_sleep);
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	}
@@ -588,7 +588,7 @@
 	unsigned int mask;
 	struct sock *sk = sock->sk;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* the socket is readable if there are any messages waiting on the Rx
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035..971890d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@
 	finish_wait(sk->sk_sleep, &wait);
 }
 
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
-	struct sk_buff *frag;
-
-	if (!skb->data_len)
-		goto done;
-
-	/* Don't forget the fragments. */
-	skb_walk_frags(skb, frag)
-		sctp_sock_rfree_frag(frag);
-
-done:
-	sctp_sock_rfree(skb);
-}
-
 static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
 {
 	struct sk_buff *frag;
@@ -6776,7 +6761,6 @@
 	sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
 		event = sctp_skb2event(skb);
 		if (event->asoc == assoc) {
-			sctp_sock_rfree_frag(skb);
 			__skb_unlink(skb, &oldsk->sk_receive_queue);
 			__skb_queue_tail(&newsk->sk_receive_queue, skb);
 			sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@
 		sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
 			event = sctp_skb2event(skb);
 			if (event->asoc == assoc) {
-				sctp_sock_rfree_frag(skb);
 				__skb_unlink(skb, &oldsp->pd_lobby);
 				__skb_queue_tail(queue, skb);
 				sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@
 
 	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
 	/* Set the type of socket to indicate that it is peeled off from the
 	 * original UDP-style socket or created with the accept() call on a
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 36d4e44..fc3ebb9 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -315,7 +315,7 @@
 {
 	read_lock(&sk->sk_callback_lock);
 	if (unix_writable(sk)) {
-		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		if (sk_has_sleeper(sk))
 			wake_up_interruptible_sync(sk->sk_sleep);
 		sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
 	}
@@ -1985,7 +1985,7 @@
 	struct sock *sk = sock->sk;
 	unsigned int mask;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
@@ -2022,7 +2022,7 @@
 	struct sock *sk = sock->sk, *other;
 	unsigned int mask, writable;
 
-	poll_wait(file, sk->sk_sleep, wait);
+	sock_poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
 	/* exceptional events? */
@@ -2053,7 +2053,7 @@
 		other = unix_peer_get(sk);
 		if (other) {
 			if (unix_peer(other) != sk) {
-				poll_wait(file, &unix_sk(other)->peer_wait,
+				sock_poll_wait(file, &unix_sk(other)->peer_wait,
 					  wait);
 				if (unix_recvq_full(other))
 					writable = 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 241bddd..43bdb13 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -447,6 +447,7 @@
 
 	rdev = __cfg80211_drv_from_info(info);
 	if (IS_ERR(rdev)) {
+		mutex_unlock(&cfg80211_mutex);
 		result = PTR_ERR(rdev);
 		goto unlock;
 	}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e95b638..f8e71b3 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -366,7 +366,6 @@
 	found = rb_find_bss(dev, res);
 
 	if (found) {
-		kref_get(&found->ref);
 		found->pub.beacon_interval = res->pub.beacon_interval;
 		found->pub.tsf = res->pub.tsf;
 		found->pub.signal = res->pub.signal;
diff --git a/scripts/.gitignore b/scripts/.gitignore
index b939fbd..52cab46a 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -7,3 +7,4 @@
 bin2c
 unifdef
 binoffset
+ihex2fw
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 01c2d13..b19f1f4 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -16,6 +16,8 @@
 	local pname="$1" pdir="$2"
 
 	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+	cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
+	gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
 
 	# Fix ownership and permissions
 	chown -R root:root "$pdir"
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index e617aca..61b8ab3 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -644,7 +644,7 @@
 	int err;
         int capture=1;
   
-	/* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */
+	/* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */
 	emu->p16v_device_offset = device;
 	if (rpcm)
 		*rpcm = NULL;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 462e2ce..26d255d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3470,10 +3470,16 @@
 		}
 		mutex_lock(&codec->spdif_mutex);
 		if (mout->share_spdif) {
-			runtime->hw.rates &= mout->spdif_rates;
-			runtime->hw.formats &= mout->spdif_formats;
-			if (mout->spdif_maxbps < hinfo->maxbps)
-				hinfo->maxbps = mout->spdif_maxbps;
+			if ((runtime->hw.rates & mout->spdif_rates) &&
+			    (runtime->hw.formats & mout->spdif_formats)) {
+				runtime->hw.rates &= mout->spdif_rates;
+				runtime->hw.formats &= mout->spdif_formats;
+				if (mout->spdif_maxbps < hinfo->maxbps)
+					hinfo->maxbps = mout->spdif_maxbps;
+			} else {
+				mout->share_spdif = 0;
+				/* FIXME: need notify? */
+			}
 		}
 		mutex_unlock(&codec->spdif_mutex);
 	}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4e9ea70..1877d95 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1454,6 +1454,7 @@
 		mutex_unlock(&chip->open_mutex);
 		return err;
 	}
+	snd_pcm_limit_hw_rates(runtime);
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	azx_dev->substream = substream;
 	azx_dev->running = 0;
@@ -1463,6 +1464,12 @@
 	snd_pcm_set_sync(substream);
 	mutex_unlock(&chip->open_mutex);
 
+	if (snd_BUG_ON(!runtime->hw.channels_min || !runtime->hw.channels_max))
+		return -EINVAL;
+	if (snd_BUG_ON(!runtime->hw.formats))
+		return -EINVAL;
+	if (snd_BUG_ON(!runtime->hw.rates))
+		return -EINVAL;
 	return 0;
 }
 
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 1988582..be7d25f 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3746,9 +3746,30 @@
 	{ } /* end */
 };
 
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+				        struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+	int mute = (!ucontrol->value.integer.value[0] &&
+		    !ucontrol->value.integer.value[1]);
+	/* toggle GPIO1 according to the mute state */
+	snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+			    mute ? 0x02 : 0x0);
+	return ret;
+}
+
 static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+	/*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = snd_hda_mixer_amp_switch_info,
+		.get = snd_hda_mixer_amp_switch_get,
+		.put = ad1884a_mobile_master_sw_put,
+		.private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+	},
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
@@ -3869,6 +3890,10 @@
 	/* unsolicited event for pin-sense */
 	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	/* allow to touch GPIO1 (for mute control) */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
 	{ } /* end */
 };
 
@@ -3978,6 +4003,7 @@
 	SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE),
+	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 392d108..019ca7c 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -510,7 +510,7 @@
 }
 
 
-int patch_ca0110(struct hda_codec *codec)
+static int patch_ca0110(struct hda_codec *codec)
 {
 	struct ca0110_spec *spec;
 	int err;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3a8e58c..e661b21 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -12876,20 +12876,11 @@
 	{ }
 };
 
-/* bind volumes of both NID 0x0c and 0x0d */
-static struct hda_bind_ctls alc269_epc_bind_vol = {
-	.ops = &snd_hda_bind_vol,
-	.values = {
-		HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
-		HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
-		0
-	},
-};
-
 static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
-	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
-	HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
 	{ } /* end */
 };
 
@@ -12902,12 +12893,7 @@
 };
 
 /* FSC amilo */
-static struct snd_kcontrol_new alc269_fujitsu_mixer[] = {
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
-	HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol),
-	{ } /* end */
-};
+#define alc269_fujitsu_mixer	alc269_eeepc_mixer
 
 static struct hda_verb alc269_quanta_fl1_verbs[] = {
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bf971f7..6ebcb6b 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -635,6 +635,8 @@
 
 static void xonar_d1_resume(struct oxygen *chip)
 {
+	oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+	msleep(1);
 	cs43xx_init(chip);
 	xonar_enable_output(chip);
 }
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 5dbebf8..8cb65cc 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -33,7 +33,7 @@
 config SND_SOC_MPC5200_AC97
 	tristate "Freescale MPC5200 PSC in AC97 mode driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select AC97_BUS
+	select SND_SOC_AC97_BUS
 	select SND_MPC52xx_DMA
 	select PPC_BESTCOMM_GEN_BD
 	help
@@ -41,7 +41,7 @@
 
 config SND_MPC52xx_SOC_PCM030
 	tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
-	depends on PPC_MPC5200_SIMPLE && BROKEN
+	depends on PPC_MPC5200_SIMPLE
 	select SND_SOC_MPC5200_AC97
 	select SND_SOC_WM9712
 	help
@@ -50,7 +50,7 @@
 
 config SND_MPC52xx_SOC_EFIKA
 	tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
-	depends on PPC_EFIKA && BROKEN
+	depends on PPC_EFIKA
 	select SND_SOC_MPC5200_AC97
 	select SND_SOC_STAC9766
 	help
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 6454e15..84a1950 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -216,12 +216,15 @@
 	dma_addr_t ptr;
 	snd_pcm_uframes_t offset;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		ptr = omap_get_dma_src_pos(prtd->dma_ch);
-	else
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 		ptr = omap_get_dma_dst_pos(prtd->dma_ch);
+		offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+	} else if (!(cpu_is_omap1510())) {
+		ptr = omap_get_dma_src_pos(prtd->dma_ch);
+		offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+	} else
+		offset = prtd->period_index * runtime->period_size;
 
-	offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
 	if (offset >= runtime->buffer_size)
 		offset = 0;
 
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 4743e26..6b8f655 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -167,6 +167,7 @@
 
 	BUG_ON(IS_ERR(clk_i2s));
 	clk_enable(clk_i2s);
+	dai->private_data = dai;
 	pxa_i2s_wait();
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -255,7 +256,10 @@
 	if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
-		clk_disable(clk_i2s);
+		if (dai->private_data != NULL) {
+			clk_disable(clk_i2s);
+			dai->private_data = NULL;
+		}
 	}
 }
 
@@ -336,6 +340,7 @@
 		return PTR_ERR(clk_i2s);
 
 	pxa_i2s_dai.dev = &dev->dev;
+	pxa_i2s_dai.private_data = NULL;
 	ret = snd_soc_register_dai(&pxa_i2s_dai);
 	if (ret != 0)
 		clk_put(clk_i2s);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 12522e6..a41f8b1 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
 #include <sound/core.h>
 
 #ifdef CONFIG_SOUND_OSS_CORE
@@ -29,6 +31,8 @@
 
 static char *sound_nodename(struct device *dev)
 {
+	if (MAJOR(dev->devt) == SOUND_MAJOR)
+		return NULL;
 	return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
 }
 
@@ -104,7 +108,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sound.h>
-#include <linux/major.h>
 #include <linux/kmod.h>
 
 #define SOUND_STEP 16
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 0e5db71..de38108 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
@@ -349,7 +349,9 @@
 		log("Unable to set up control system (ret=%d)\n", ret);
 }
 
-static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
+static int create_card(struct usb_device *usb_dev,
+		       struct usb_interface *intf,
+		       struct snd_card **cardp)
 {
 	int devnum;
 	int err;
@@ -374,7 +376,7 @@
 	dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
 				  le16_to_cpu(usb_dev->descriptor.idProduct));
 	spin_lock_init(&dev->spinlock);
-	snd_card_set_dev(card, &usb_dev->dev);
+	snd_card_set_dev(card, &intf->dev);
 
 	*cardp = card;
 	return 0;
@@ -461,7 +463,7 @@
 	struct snd_card *card;
 	struct usb_device *device = interface_to_usbdev(intf);
 
-	ret = create_card(device, &card);
+	ret = create_card(device, intf, &card);
 
 	if (ret < 0)
 		return ret;
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index a5aae9d..fd44946 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -514,7 +514,6 @@
 		US122L(card)->chip.dev->bus->busnum,
 		US122L(card)->chip.dev->devnum
 		);
-	snd_card_set_dev(card, &device->dev);
 	*cardp = card;
 	return 0;
 }
@@ -531,6 +530,7 @@
 	if (err < 0)
 		return err;
 
+	snd_card_set_dev(card, &intf->dev);
 	if (!us122l_create_card(card)) {
 		snd_card_free(card);
 		return -EINVAL;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 5ce0da2..cb4bb83 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -364,7 +364,6 @@
 		0,//us428(card)->usbmidi.ifnum,
 		usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum
 		);
-	snd_card_set_dev(card, &device->dev);
 	*cardp = card;
 	return 0;
 }
@@ -388,6 +387,7 @@
 	err = usX2Y_create_card(device, &card);
 	if (err < 0)
 		return err;
+	snd_card_set_dev(card, &intf->dev);
 	if ((err = usX2Y_hwdep_new(card, device)) < 0  ||
 	    (err = snd_card_register(card)) < 0) {
 		snd_card_free(card);
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index dd1ab61..9efd27f 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -296,9 +296,10 @@
 static void usX2Y_error_sequence(struct usX2Ydev *usX2Y,
 				 struct snd_usX2Y_substream *subs, struct urb *urb)
 {
-	snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
-		   KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n"
-		   KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n",
+	snd_printk(KERN_ERR
+"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
+"Most propably some urb of usb-frame %i is still missing.\n"
+"Cause could be too long delays in usb-hcd interrupt handling.\n",
 		   usb_get_current_frame_number(usX2Y->chip.dev),
 		   subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
 		   usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ce39419..d3042a6 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -19,6 +19,22 @@
 #define cpu_relax()	asm volatile("" ::: "memory");
 #endif
 
+#ifdef __sh__
+#include "../../arch/sh/include/asm/unistd.h"
+#if defined(__SH4A__) || defined(__SH5__)
+# define rmb()		asm volatile("synco" ::: "memory")
+#else
+# define rmb()		asm volatile("" ::: "memory")
+#endif
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
+#ifdef __hppa__
+#include "../../arch/parisc/include/asm/unistd.h"
+#define rmb()		asm volatile("" ::: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory");
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>