[SCSI] qla2xxx: Add ISP25XX support.
Large code-reuse from ISP24xx, consolidate RISC memory
extraction routines during firmware-dump.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e870e7c..8bdc5a2 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -265,6 +265,8 @@
strcpy(str, "PCIe (");
if (lspeed == 1)
strcat(str, "2.5Gb/s ");
+ else if (lspeed == 2)
+ strcat(str, "5.0Gb/s ");
else
strcat(str, "<unknown> ");
snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
@@ -343,6 +345,12 @@
strcat(str, "[IP] ");
if (ha->fw_attributes & BIT_2)
strcat(str, "[Multi-ID] ");
+ if (ha->fw_attributes & BIT_3)
+ strcat(str, "[SB-2] ");
+ if (ha->fw_attributes & BIT_4)
+ strcat(str, "[T10 CRC] ");
+ if (ha->fw_attributes & BIT_5)
+ strcat(str, "[VI] ");
if (ha->fw_attributes & BIT_13)
strcat(str, "[Experimental]");
return str;
@@ -1348,6 +1356,39 @@
.get_flash_version = qla24xx_get_flash_version,
};
+static struct isp_operations qla25xx_isp_ops = {
+ .pci_config = qla25xx_pci_config,
+ .reset_chip = qla24xx_reset_chip,
+ .chip_diag = qla24xx_chip_diag,
+ .config_rings = qla24xx_config_rings,
+ .reset_adapter = qla24xx_reset_adapter,
+ .nvram_config = qla24xx_nvram_config,
+ .update_fw_options = qla24xx_update_fw_options,
+ .load_risc = qla24xx_load_risc,
+ .pci_info_str = qla24xx_pci_info_str,
+ .fw_version_str = qla24xx_fw_version_str,
+ .intr_handler = qla24xx_intr_handler,
+ .enable_intrs = qla24xx_enable_intrs,
+ .disable_intrs = qla24xx_disable_intrs,
+ .abort_command = qla24xx_abort_command,
+ .abort_target = qla24xx_abort_target,
+ .fabric_login = qla24xx_login_fabric,
+ .fabric_logout = qla24xx_fabric_logout,
+ .calc_req_entries = NULL,
+ .build_iocbs = NULL,
+ .prep_ms_iocb = qla24xx_prep_ms_iocb,
+ .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
+ .read_nvram = qla25xx_read_nvram_data,
+ .write_nvram = qla25xx_write_nvram_data,
+ .fw_dump = qla25xx_fw_dump,
+ .beacon_on = qla24xx_beacon_on,
+ .beacon_off = qla24xx_beacon_off,
+ .beacon_blink = qla24xx_beacon_blink,
+ .read_optrom = qla24xx_read_optrom_data,
+ .write_optrom = qla24xx_write_optrom_data,
+ .get_flash_version = qla24xx_get_flash_version,
+};
+
static inline void
qla2x00_set_isp_flags(scsi_qla_host_t *ha)
{
@@ -1413,6 +1454,13 @@
ha->device_type |= DT_FWI2;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
+ case PCI_DEVICE_ID_QLOGIC_ISP2532:
+ ha->device_type |= DT_ISP2532;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->device_type |= DT_FWI2;
+ ha->device_type |= DT_IIDMA;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
}
}
@@ -1527,7 +1575,8 @@
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
- pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532)
sht = &qla24xx_driver_template;
host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
@@ -1609,6 +1658,17 @@
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_24XX;
ha->isp_ops = &qla24xx_isp_ops;
+ } else if (IS_QLA25XX(ha)) {
+ host->max_id = MAX_TARGETS_2200;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
+ ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
+ ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
+ ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
+ ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
+ ha->gid_list_info_size = 8;
+ ha->optrom_size = OPTROM_SIZE_25XX;
+ ha->isp_ops = &qla25xx_isp_ops;
}
host->can_queue = ha->request_q_length + 128;
@@ -2665,18 +2725,20 @@
/* Firmware interface routines. */
-#define FW_BLOBS 5
+#define FW_BLOBS 6
#define FW_ISP21XX 0
#define FW_ISP22XX 1
#define FW_ISP2300 2
#define FW_ISP2322 3
#define FW_ISP24XX 4
+#define FW_ISP25XX 5
#define FW_FILE_ISP21XX "ql2100_fw.bin"
#define FW_FILE_ISP22XX "ql2200_fw.bin"
#define FW_FILE_ISP2300 "ql2300_fw.bin"
#define FW_FILE_ISP2322 "ql2322_fw.bin"
#define FW_FILE_ISP24XX "ql2400_fw.bin"
+#define FW_FILE_ISP25XX "ql2500_fw.bin"
static DECLARE_MUTEX(qla_fw_lock);
@@ -2686,6 +2748,7 @@
{ .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
{ .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
{ .name = FW_FILE_ISP24XX, },
+ { .name = FW_FILE_ISP25XX, },
};
struct fw_blob *
@@ -2704,6 +2767,8 @@
blob = &qla_fw_blobs[FW_ISP2322];
} else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
blob = &qla_fw_blobs[FW_ISP24XX];
+ } else if (IS_QLA25XX(ha)) {
+ blob = &qla_fw_blobs[FW_ISP25XX];
}
down(&qla_fw_lock);
@@ -2747,6 +2812,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);