| /* |
| md.c : Multiple Devices driver for Linux |
| Copyright (C) 1998, 1999, 2000 Ingo Molnar |
| |
| completely rewritten, based on the MD driver code from Marc Zyngier |
| |
| Changes: |
| |
| - RAID-1/RAID-5 extensions by Miguel de Icaza, Gadi Oxman, Ingo Molnar |
| - RAID-6 extensions by H. Peter Anvin <hpa@zytor.com> |
| - boot support for linear and striped mode by Harald Hoyer <HarryH@Royal.Net> |
| - kerneld support by Boris Tobotras <boris@xtalk.msk.su> |
| - kmod support by: Cyrus Durgin |
| - RAID0 bugfixes: Mark Anthony Lisher <markal@iname.com> |
| - Devfs support by Richard Gooch <rgooch@atnf.csiro.au> |
| |
| - lots of fixes and improvements to the RAID1/RAID5 and generic |
| RAID code (such as request based resynchronization): |
| |
| Neil Brown <neilb@cse.unsw.edu.au>. |
| |
| - persistent bitmap code |
| Copyright (C) 2003-2004, Paul Clements, SteelEye Technology, Inc. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| You should have received a copy of the GNU General Public License |
| (for example /usr/src/linux/COPYING); if not, write to the Free |
| Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/config.h> |
| #include <linux/kthread.h> |
| #include <linux/linkage.h> |
| #include <linux/raid/md.h> |
| #include <linux/raid/bitmap.h> |
| #include <linux/sysctl.h> |
| #include <linux/devfs_fs_kernel.h> |
| #include <linux/buffer_head.h> /* for invalidate_bdev */ |
| #include <linux/suspend.h> |
| |
| #include <linux/init.h> |
| |
| #include <linux/file.h> |
| |
| #ifdef CONFIG_KMOD |
| #include <linux/kmod.h> |
| #endif |
| |
| #include <asm/unaligned.h> |
| |
| #define MAJOR_NR MD_MAJOR |
| #define MD_DRIVER |
| |
| /* 63 partitions with the alternate major number (mdp) */ |
| #define MdpMinorShift 6 |
| |
| #define DEBUG 0 |
| #define dprintk(x...) ((void)(DEBUG && printk(x))) |
| |
| |
| #ifndef MODULE |
| static void autostart_arrays (int part); |
| #endif |
| |
| static mdk_personality_t *pers[MAX_PERSONALITY]; |
| static DEFINE_SPINLOCK(pers_lock); |
| |
| /* |
| * Current RAID-1,4,5 parallel reconstruction 'guaranteed speed limit' |
| * is 1000 KB/sec, so the extra system load does not show up that much. |
| * Increase it if you want to have more _guaranteed_ speed. Note that |
| * the RAID driver will use the maximum available bandwidth if the IO |
| * subsystem is idle. There is also an 'absolute maximum' reconstruction |
| * speed limit - in case reconstruction slows down your system despite |
| * idle IO detection. |
| * |
| * you can change it via /proc/sys/dev/raid/speed_limit_min and _max. |
| */ |
| |
| static int sysctl_speed_limit_min = 1000; |
| static int sysctl_speed_limit_max = 200000; |
| |
| static struct ctl_table_header *raid_table_header; |
| |
| static ctl_table raid_table[] = { |
| { |
| .ctl_name = DEV_RAID_SPEED_LIMIT_MIN, |
| .procname = "speed_limit_min", |
| .data = &sysctl_speed_limit_min, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { |
| .ctl_name = DEV_RAID_SPEED_LIMIT_MAX, |
| .procname = "speed_limit_max", |
| .data = &sysctl_speed_limit_max, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table raid_dir_table[] = { |
| { |
| .ctl_name = DEV_RAID, |
| .procname = "raid", |
| .maxlen = 0, |
| .mode = 0555, |
| .child = raid_table, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table raid_root_table[] = { |
| { |
| .ctl_name = CTL_DEV, |
| .procname = "dev", |
| .maxlen = 0, |
| .mode = 0555, |
| .child = raid_dir_table, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static struct block_device_operations md_fops; |
| |
| /* |
| * Enables to iterate over all existing md arrays |
| * all_mddevs_lock protects this list. |
| */ |
| static LIST_HEAD(all_mddevs); |
| static DEFINE_SPINLOCK(all_mddevs_lock); |
| |
| |
| /* |
| * iterates through all used mddevs in the system. |
| * We take care to grab the all_mddevs_lock whenever navigating |
| * the list, and to always hold a refcount when unlocked. |
| * Any code which breaks out of this loop while own |
| * a reference to the current mddev and must mddev_put it. |
| */ |
| #define ITERATE_MDDEV(mddev,tmp) \ |
| \ |
| for (({ spin_lock(&all_mddevs_lock); \ |
| tmp = all_mddevs.next; \ |
| mddev = NULL;}); \ |
| ({ if (tmp != &all_mddevs) \ |
| mddev_get(list_entry(tmp, mddev_t, all_mddevs));\ |
| spin_unlock(&all_mddevs_lock); \ |
| if (mddev) mddev_put(mddev); \ |
| mddev = list_entry(tmp, mddev_t, all_mddevs); \ |
| tmp != &all_mddevs;}); \ |
| ({ spin_lock(&all_mddevs_lock); \ |
| tmp = tmp->next;}) \ |
| ) |
| |
| |
| static int md_fail_request (request_queue_t *q, struct bio *bio) |
| { |
| bio_io_error(bio, bio->bi_size); |
| return 0; |
| } |
| |
| static inline mddev_t *mddev_get(mddev_t *mddev) |
| { |
| atomic_inc(&mddev->active); |
| return mddev; |
| } |
| |
| static void mddev_put(mddev_t *mddev) |
| { |
| if (!atomic_dec_and_lock(&mddev->active, &all_mddevs_lock)) |
| return; |
| if (!mddev->raid_disks && list_empty(&mddev->disks)) { |
| list_del(&mddev->all_mddevs); |
| blk_put_queue(mddev->queue); |
| kfree(mddev); |
| } |
| spin_unlock(&all_mddevs_lock); |
| } |
| |
| static mddev_t * mddev_find(dev_t unit) |
| { |
| mddev_t *mddev, *new = NULL; |
| |
| retry: |
| spin_lock(&all_mddevs_lock); |
| list_for_each_entry(mddev, &all_mddevs, all_mddevs) |
| if (mddev->unit == unit) { |
| mddev_get(mddev); |
| spin_unlock(&all_mddevs_lock); |
| kfree(new); |
| return mddev; |
| } |
| |
| if (new) { |
| list_add(&new->all_mddevs, &all_mddevs); |
| spin_unlock(&all_mddevs_lock); |
| return new; |
| } |
| spin_unlock(&all_mddevs_lock); |
| |
| new = (mddev_t *) kmalloc(sizeof(*new), GFP_KERNEL); |
| if (!new) |
| return NULL; |
| |
| memset(new, 0, sizeof(*new)); |
| |
| new->unit = unit; |
| if (MAJOR(unit) == MD_MAJOR) |
| new->md_minor = MINOR(unit); |
| else |
| new->md_minor = MINOR(unit) >> MdpMinorShift; |
| |
| init_MUTEX(&new->reconfig_sem); |
| INIT_LIST_HEAD(&new->disks); |
| INIT_LIST_HEAD(&new->all_mddevs); |
| init_timer(&new->safemode_timer); |
| atomic_set(&new->active, 1); |
| spin_lock_init(&new->write_lock); |
| init_waitqueue_head(&new->sb_wait); |
| |
| new->queue = blk_alloc_queue(GFP_KERNEL); |
| if (!new->queue) { |
| kfree(new); |
| return NULL; |
| } |
| |
| blk_queue_make_request(new->queue, md_fail_request); |
| |
| goto retry; |
| } |
| |
| static inline int mddev_lock(mddev_t * mddev) |
| { |
| return down_interruptible(&mddev->reconfig_sem); |
| } |
| |
| static inline void mddev_lock_uninterruptible(mddev_t * mddev) |
| { |
| down(&mddev->reconfig_sem); |
| } |
| |
| static inline int mddev_trylock(mddev_t * mddev) |
| { |
| return down_trylock(&mddev->reconfig_sem); |
| } |
| |
| static inline void mddev_unlock(mddev_t * mddev) |
| { |
| up(&mddev->reconfig_sem); |
| |
| md_wakeup_thread(mddev->thread); |
| } |
| |
| mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr) |
| { |
| mdk_rdev_t * rdev; |
| struct list_head *tmp; |
| |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (rdev->desc_nr == nr) |
| return rdev; |
| } |
| return NULL; |
| } |
| |
| static mdk_rdev_t * find_rdev(mddev_t * mddev, dev_t dev) |
| { |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (rdev->bdev->bd_dev == dev) |
| return rdev; |
| } |
| return NULL; |
| } |
| |
| static inline sector_t calc_dev_sboffset(struct block_device *bdev) |
| { |
| sector_t size = bdev->bd_inode->i_size >> BLOCK_SIZE_BITS; |
| return MD_NEW_SIZE_BLOCKS(size); |
| } |
| |
| static sector_t calc_dev_size(mdk_rdev_t *rdev, unsigned chunk_size) |
| { |
| sector_t size; |
| |
| size = rdev->sb_offset; |
| |
| if (chunk_size) |
| size &= ~((sector_t)chunk_size/1024 - 1); |
| return size; |
| } |
| |
| static int alloc_disk_sb(mdk_rdev_t * rdev) |
| { |
| if (rdev->sb_page) |
| MD_BUG(); |
| |
| rdev->sb_page = alloc_page(GFP_KERNEL); |
| if (!rdev->sb_page) { |
| printk(KERN_ALERT "md: out of memory.\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void free_disk_sb(mdk_rdev_t * rdev) |
| { |
| if (rdev->sb_page) { |
| page_cache_release(rdev->sb_page); |
| rdev->sb_loaded = 0; |
| rdev->sb_page = NULL; |
| rdev->sb_offset = 0; |
| rdev->size = 0; |
| } |
| } |
| |
| |
| static int super_written(struct bio *bio, unsigned int bytes_done, int error) |
| { |
| mdk_rdev_t *rdev = bio->bi_private; |
| if (bio->bi_size) |
| return 1; |
| |
| if (error || !test_bit(BIO_UPTODATE, &bio->bi_flags)) |
| md_error(rdev->mddev, rdev); |
| |
| if (atomic_dec_and_test(&rdev->mddev->pending_writes)) |
| wake_up(&rdev->mddev->sb_wait); |
| bio_put(bio); |
| return 0; |
| } |
| |
| void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, |
| sector_t sector, int size, struct page *page) |
| { |
| /* write first size bytes of page to sector of rdev |
| * Increment mddev->pending_writes before returning |
| * and decrement it on completion, waking up sb_wait |
| * if zero is reached. |
| * If an error occurred, call md_error |
| */ |
| struct bio *bio = bio_alloc(GFP_NOIO, 1); |
| |
| bio->bi_bdev = rdev->bdev; |
| bio->bi_sector = sector; |
| bio_add_page(bio, page, size, 0); |
| bio->bi_private = rdev; |
| bio->bi_end_io = super_written; |
| atomic_inc(&mddev->pending_writes); |
| submit_bio((1<<BIO_RW)|(1<<BIO_RW_SYNC), bio); |
| } |
| |
| static int bi_complete(struct bio *bio, unsigned int bytes_done, int error) |
| { |
| if (bio->bi_size) |
| return 1; |
| |
| complete((struct completion*)bio->bi_private); |
| return 0; |
| } |
| |
| int sync_page_io(struct block_device *bdev, sector_t sector, int size, |
| struct page *page, int rw) |
| { |
| struct bio *bio = bio_alloc(GFP_NOIO, 1); |
| struct completion event; |
| int ret; |
| |
| rw |= (1 << BIO_RW_SYNC); |
| |
| bio->bi_bdev = bdev; |
| bio->bi_sector = sector; |
| bio_add_page(bio, page, size, 0); |
| init_completion(&event); |
| bio->bi_private = &event; |
| bio->bi_end_io = bi_complete; |
| submit_bio(rw, bio); |
| wait_for_completion(&event); |
| |
| ret = test_bit(BIO_UPTODATE, &bio->bi_flags); |
| bio_put(bio); |
| return ret; |
| } |
| |
| static int read_disk_sb(mdk_rdev_t * rdev, int size) |
| { |
| char b[BDEVNAME_SIZE]; |
| if (!rdev->sb_page) { |
| MD_BUG(); |
| return -EINVAL; |
| } |
| if (rdev->sb_loaded) |
| return 0; |
| |
| |
| if (!sync_page_io(rdev->bdev, rdev->sb_offset<<1, size, rdev->sb_page, READ)) |
| goto fail; |
| rdev->sb_loaded = 1; |
| return 0; |
| |
| fail: |
| printk(KERN_WARNING "md: disabled device %s, could not read superblock.\n", |
| bdevname(rdev->bdev,b)); |
| return -EINVAL; |
| } |
| |
| static int uuid_equal(mdp_super_t *sb1, mdp_super_t *sb2) |
| { |
| if ( (sb1->set_uuid0 == sb2->set_uuid0) && |
| (sb1->set_uuid1 == sb2->set_uuid1) && |
| (sb1->set_uuid2 == sb2->set_uuid2) && |
| (sb1->set_uuid3 == sb2->set_uuid3)) |
| |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| static int sb_equal(mdp_super_t *sb1, mdp_super_t *sb2) |
| { |
| int ret; |
| mdp_super_t *tmp1, *tmp2; |
| |
| tmp1 = kmalloc(sizeof(*tmp1),GFP_KERNEL); |
| tmp2 = kmalloc(sizeof(*tmp2),GFP_KERNEL); |
| |
| if (!tmp1 || !tmp2) { |
| ret = 0; |
| printk(KERN_INFO "md.c: sb1 is not equal to sb2!\n"); |
| goto abort; |
| } |
| |
| *tmp1 = *sb1; |
| *tmp2 = *sb2; |
| |
| /* |
| * nr_disks is not constant |
| */ |
| tmp1->nr_disks = 0; |
| tmp2->nr_disks = 0; |
| |
| if (memcmp(tmp1, tmp2, MD_SB_GENERIC_CONSTANT_WORDS * 4)) |
| ret = 0; |
| else |
| ret = 1; |
| |
| abort: |
| kfree(tmp1); |
| kfree(tmp2); |
| return ret; |
| } |
| |
| static unsigned int calc_sb_csum(mdp_super_t * sb) |
| { |
| unsigned int disk_csum, csum; |
| |
| disk_csum = sb->sb_csum; |
| sb->sb_csum = 0; |
| csum = csum_partial((void *)sb, MD_SB_BYTES, 0); |
| sb->sb_csum = disk_csum; |
| return csum; |
| } |
| |
| |
| /* |
| * Handle superblock details. |
| * We want to be able to handle multiple superblock formats |
| * so we have a common interface to them all, and an array of |
| * different handlers. |
| * We rely on user-space to write the initial superblock, and support |
| * reading and updating of superblocks. |
| * Interface methods are: |
| * int load_super(mdk_rdev_t *dev, mdk_rdev_t *refdev, int minor_version) |
| * loads and validates a superblock on dev. |
| * if refdev != NULL, compare superblocks on both devices |
| * Return: |
| * 0 - dev has a superblock that is compatible with refdev |
| * 1 - dev has a superblock that is compatible and newer than refdev |
| * so dev should be used as the refdev in future |
| * -EINVAL superblock incompatible or invalid |
| * -othererror e.g. -EIO |
| * |
| * int validate_super(mddev_t *mddev, mdk_rdev_t *dev) |
| * Verify that dev is acceptable into mddev. |
| * The first time, mddev->raid_disks will be 0, and data from |
| * dev should be merged in. Subsequent calls check that dev |
| * is new enough. Return 0 or -EINVAL |
| * |
| * void sync_super(mddev_t *mddev, mdk_rdev_t *dev) |
| * Update the superblock for rdev with data in mddev |
| * This does not write to disc. |
| * |
| */ |
| |
| struct super_type { |
| char *name; |
| struct module *owner; |
| int (*load_super)(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version); |
| int (*validate_super)(mddev_t *mddev, mdk_rdev_t *rdev); |
| void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev); |
| }; |
| |
| /* |
| * load_super for 0.90.0 |
| */ |
| static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) |
| { |
| char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE]; |
| mdp_super_t *sb; |
| int ret; |
| sector_t sb_offset; |
| |
| /* |
| * Calculate the position of the superblock, |
| * it's at the end of the disk. |
| * |
| * It also happens to be a multiple of 4Kb. |
| */ |
| sb_offset = calc_dev_sboffset(rdev->bdev); |
| rdev->sb_offset = sb_offset; |
| |
| ret = read_disk_sb(rdev, MD_SB_BYTES); |
| if (ret) return ret; |
| |
| ret = -EINVAL; |
| |
| bdevname(rdev->bdev, b); |
| sb = (mdp_super_t*)page_address(rdev->sb_page); |
| |
| if (sb->md_magic != MD_SB_MAGIC) { |
| printk(KERN_ERR "md: invalid raid superblock magic on %s\n", |
| b); |
| goto abort; |
| } |
| |
| if (sb->major_version != 0 || |
| sb->minor_version != 90) { |
| printk(KERN_WARNING "Bad version number %d.%d on %s\n", |
| sb->major_version, sb->minor_version, |
| b); |
| goto abort; |
| } |
| |
| if (sb->raid_disks <= 0) |
| goto abort; |
| |
| if (csum_fold(calc_sb_csum(sb)) != csum_fold(sb->sb_csum)) { |
| printk(KERN_WARNING "md: invalid superblock checksum on %s\n", |
| b); |
| goto abort; |
| } |
| |
| rdev->preferred_minor = sb->md_minor; |
| rdev->data_offset = 0; |
| rdev->sb_size = MD_SB_BYTES; |
| |
| if (sb->level == LEVEL_MULTIPATH) |
| rdev->desc_nr = -1; |
| else |
| rdev->desc_nr = sb->this_disk.number; |
| |
| if (refdev == 0) |
| ret = 1; |
| else { |
| __u64 ev1, ev2; |
| mdp_super_t *refsb = (mdp_super_t*)page_address(refdev->sb_page); |
| if (!uuid_equal(refsb, sb)) { |
| printk(KERN_WARNING "md: %s has different UUID to %s\n", |
| b, bdevname(refdev->bdev,b2)); |
| goto abort; |
| } |
| if (!sb_equal(refsb, sb)) { |
| printk(KERN_WARNING "md: %s has same UUID" |
| " but different superblock to %s\n", |
| b, bdevname(refdev->bdev, b2)); |
| goto abort; |
| } |
| ev1 = md_event(sb); |
| ev2 = md_event(refsb); |
| if (ev1 > ev2) |
| ret = 1; |
| else |
| ret = 0; |
| } |
| rdev->size = calc_dev_size(rdev, sb->chunk_size); |
| |
| abort: |
| return ret; |
| } |
| |
| /* |
| * validate_super for 0.90.0 |
| */ |
| static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) |
| { |
| mdp_disk_t *desc; |
| mdp_super_t *sb = (mdp_super_t *)page_address(rdev->sb_page); |
| |
| rdev->raid_disk = -1; |
| rdev->in_sync = 0; |
| if (mddev->raid_disks == 0) { |
| mddev->major_version = 0; |
| mddev->minor_version = sb->minor_version; |
| mddev->patch_version = sb->patch_version; |
| mddev->persistent = ! sb->not_persistent; |
| mddev->chunk_size = sb->chunk_size; |
| mddev->ctime = sb->ctime; |
| mddev->utime = sb->utime; |
| mddev->level = sb->level; |
| mddev->layout = sb->layout; |
| mddev->raid_disks = sb->raid_disks; |
| mddev->size = sb->size; |
| mddev->events = md_event(sb); |
| mddev->bitmap_offset = 0; |
| mddev->default_bitmap_offset = MD_SB_BYTES >> 9; |
| |
| if (sb->state & (1<<MD_SB_CLEAN)) |
| mddev->recovery_cp = MaxSector; |
| else { |
| if (sb->events_hi == sb->cp_events_hi && |
| sb->events_lo == sb->cp_events_lo) { |
| mddev->recovery_cp = sb->recovery_cp; |
| } else |
| mddev->recovery_cp = 0; |
| } |
| |
| memcpy(mddev->uuid+0, &sb->set_uuid0, 4); |
| memcpy(mddev->uuid+4, &sb->set_uuid1, 4); |
| memcpy(mddev->uuid+8, &sb->set_uuid2, 4); |
| memcpy(mddev->uuid+12,&sb->set_uuid3, 4); |
| |
| mddev->max_disks = MD_SB_DISKS; |
| |
| if (sb->state & (1<<MD_SB_BITMAP_PRESENT) && |
| mddev->bitmap_file == NULL) { |
| if (mddev->level != 1 && mddev->level != 5 && mddev->level != 6) { |
| /* FIXME use a better test */ |
| printk(KERN_WARNING "md: bitmaps only support for raid1\n"); |
| return -EINVAL; |
| } |
| mddev->bitmap_offset = mddev->default_bitmap_offset; |
| } |
| |
| } else if (mddev->pers == NULL) { |
| /* Insist on good event counter while assembling */ |
| __u64 ev1 = md_event(sb); |
| ++ev1; |
| if (ev1 < mddev->events) |
| return -EINVAL; |
| } else if (mddev->bitmap) { |
| /* if adding to array with a bitmap, then we can accept an |
| * older device ... but not too old. |
| */ |
| __u64 ev1 = md_event(sb); |
| if (ev1 < mddev->bitmap->events_cleared) |
| return 0; |
| } else /* just a hot-add of a new device, leave raid_disk at -1 */ |
| return 0; |
| |
| if (mddev->level != LEVEL_MULTIPATH) { |
| rdev->faulty = 0; |
| rdev->flags = 0; |
| desc = sb->disks + rdev->desc_nr; |
| |
| if (desc->state & (1<<MD_DISK_FAULTY)) |
| rdev->faulty = 1; |
| else if (desc->state & (1<<MD_DISK_SYNC) && |
| desc->raid_disk < mddev->raid_disks) { |
| rdev->in_sync = 1; |
| rdev->raid_disk = desc->raid_disk; |
| } |
| if (desc->state & (1<<MD_DISK_WRITEMOSTLY)) |
| set_bit(WriteMostly, &rdev->flags); |
| } else /* MULTIPATH are always insync */ |
| rdev->in_sync = 1; |
| return 0; |
| } |
| |
| /* |
| * sync_super for 0.90.0 |
| */ |
| static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) |
| { |
| mdp_super_t *sb; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev2; |
| int next_spare = mddev->raid_disks; |
| |
| /* make rdev->sb match mddev data.. |
| * |
| * 1/ zero out disks |
| * 2/ Add info for each disk, keeping track of highest desc_nr (next_spare); |
| * 3/ any empty disks < next_spare become removed |
| * |
| * disks[0] gets initialised to REMOVED because |
| * we cannot be sure from other fields if it has |
| * been initialised or not. |
| */ |
| int i; |
| int active=0, working=0,failed=0,spare=0,nr_disks=0; |
| |
| rdev->sb_size = MD_SB_BYTES; |
| |
| sb = (mdp_super_t*)page_address(rdev->sb_page); |
| |
| memset(sb, 0, sizeof(*sb)); |
| |
| sb->md_magic = MD_SB_MAGIC; |
| sb->major_version = mddev->major_version; |
| sb->minor_version = mddev->minor_version; |
| sb->patch_version = mddev->patch_version; |
| sb->gvalid_words = 0; /* ignored */ |
| memcpy(&sb->set_uuid0, mddev->uuid+0, 4); |
| memcpy(&sb->set_uuid1, mddev->uuid+4, 4); |
| memcpy(&sb->set_uuid2, mddev->uuid+8, 4); |
| memcpy(&sb->set_uuid3, mddev->uuid+12,4); |
| |
| sb->ctime = mddev->ctime; |
| sb->level = mddev->level; |
| sb->size = mddev->size; |
| sb->raid_disks = mddev->raid_disks; |
| sb->md_minor = mddev->md_minor; |
| sb->not_persistent = !mddev->persistent; |
| sb->utime = mddev->utime; |
| sb->state = 0; |
| sb->events_hi = (mddev->events>>32); |
| sb->events_lo = (u32)mddev->events; |
| |
| if (mddev->in_sync) |
| { |
| sb->recovery_cp = mddev->recovery_cp; |
| sb->cp_events_hi = (mddev->events>>32); |
| sb->cp_events_lo = (u32)mddev->events; |
| if (mddev->recovery_cp == MaxSector) |
| sb->state = (1<< MD_SB_CLEAN); |
| } else |
| sb->recovery_cp = 0; |
| |
| sb->layout = mddev->layout; |
| sb->chunk_size = mddev->chunk_size; |
| |
| if (mddev->bitmap && mddev->bitmap_file == NULL) |
| sb->state |= (1<<MD_SB_BITMAP_PRESENT); |
| |
| sb->disks[0].state = (1<<MD_DISK_REMOVED); |
| ITERATE_RDEV(mddev,rdev2,tmp) { |
| mdp_disk_t *d; |
| if (rdev2->raid_disk >= 0 && rdev2->in_sync && !rdev2->faulty) |
| rdev2->desc_nr = rdev2->raid_disk; |
| else |
| rdev2->desc_nr = next_spare++; |
| d = &sb->disks[rdev2->desc_nr]; |
| nr_disks++; |
| d->number = rdev2->desc_nr; |
| d->major = MAJOR(rdev2->bdev->bd_dev); |
| d->minor = MINOR(rdev2->bdev->bd_dev); |
| if (rdev2->raid_disk >= 0 && rdev->in_sync && !rdev2->faulty) |
| d->raid_disk = rdev2->raid_disk; |
| else |
| d->raid_disk = rdev2->desc_nr; /* compatibility */ |
| if (rdev2->faulty) { |
| d->state = (1<<MD_DISK_FAULTY); |
| failed++; |
| } else if (rdev2->in_sync) { |
| d->state = (1<<MD_DISK_ACTIVE); |
| d->state |= (1<<MD_DISK_SYNC); |
| active++; |
| working++; |
| } else { |
| d->state = 0; |
| spare++; |
| working++; |
| } |
| if (test_bit(WriteMostly, &rdev2->flags)) |
| d->state |= (1<<MD_DISK_WRITEMOSTLY); |
| } |
| |
| /* now set the "removed" and "faulty" bits on any missing devices */ |
| for (i=0 ; i < mddev->raid_disks ; i++) { |
| mdp_disk_t *d = &sb->disks[i]; |
| if (d->state == 0 && d->number == 0) { |
| d->number = i; |
| d->raid_disk = i; |
| d->state = (1<<MD_DISK_REMOVED); |
| d->state |= (1<<MD_DISK_FAULTY); |
| failed++; |
| } |
| } |
| sb->nr_disks = nr_disks; |
| sb->active_disks = active; |
| sb->working_disks = working; |
| sb->failed_disks = failed; |
| sb->spare_disks = spare; |
| |
| sb->this_disk = sb->disks[rdev->desc_nr]; |
| sb->sb_csum = calc_sb_csum(sb); |
| } |
| |
| /* |
| * version 1 superblock |
| */ |
| |
| static unsigned int calc_sb_1_csum(struct mdp_superblock_1 * sb) |
| { |
| unsigned int disk_csum, csum; |
| unsigned long long newcsum; |
| int size = 256 + le32_to_cpu(sb->max_dev)*2; |
| unsigned int *isuper = (unsigned int*)sb; |
| int i; |
| |
| disk_csum = sb->sb_csum; |
| sb->sb_csum = 0; |
| newcsum = 0; |
| for (i=0; size>=4; size -= 4 ) |
| newcsum += le32_to_cpu(*isuper++); |
| |
| if (size == 2) |
| newcsum += le16_to_cpu(*(unsigned short*) isuper); |
| |
| csum = (newcsum & 0xffffffff) + (newcsum >> 32); |
| sb->sb_csum = disk_csum; |
| return cpu_to_le32(csum); |
| } |
| |
| static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) |
| { |
| struct mdp_superblock_1 *sb; |
| int ret; |
| sector_t sb_offset; |
| char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE]; |
| int bmask; |
| |
| /* |
| * Calculate the position of the superblock. |
| * It is always aligned to a 4K boundary and |
| * depeding on minor_version, it can be: |
| * 0: At least 8K, but less than 12K, from end of device |
| * 1: At start of device |
| * 2: 4K from start of device. |
| */ |
| switch(minor_version) { |
| case 0: |
| sb_offset = rdev->bdev->bd_inode->i_size >> 9; |
| sb_offset -= 8*2; |
| sb_offset &= ~(sector_t)(4*2-1); |
| /* convert from sectors to K */ |
| sb_offset /= 2; |
| break; |
| case 1: |
| sb_offset = 0; |
| break; |
| case 2: |
| sb_offset = 4; |
| break; |
| default: |
| return -EINVAL; |
| } |
| rdev->sb_offset = sb_offset; |
| |
| /* superblock is rarely larger than 1K, but it can be larger, |
| * and it is safe to read 4k, so we do that |
| */ |
| ret = read_disk_sb(rdev, 4096); |
| if (ret) return ret; |
| |
| |
| sb = (struct mdp_superblock_1*)page_address(rdev->sb_page); |
| |
| if (sb->magic != cpu_to_le32(MD_SB_MAGIC) || |
| sb->major_version != cpu_to_le32(1) || |
| le32_to_cpu(sb->max_dev) > (4096-256)/2 || |
| le64_to_cpu(sb->super_offset) != (rdev->sb_offset<<1) || |
| (le32_to_cpu(sb->feature_map) & ~MD_FEATURE_ALL) != 0) |
| return -EINVAL; |
| |
| if (calc_sb_1_csum(sb) != sb->sb_csum) { |
| printk("md: invalid superblock checksum on %s\n", |
| bdevname(rdev->bdev,b)); |
| return -EINVAL; |
| } |
| if (le64_to_cpu(sb->data_size) < 10) { |
| printk("md: data_size too small on %s\n", |
| bdevname(rdev->bdev,b)); |
| return -EINVAL; |
| } |
| rdev->preferred_minor = 0xffff; |
| rdev->data_offset = le64_to_cpu(sb->data_offset); |
| |
| rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256; |
| bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1; |
| if (rdev->sb_size & bmask) |
| rdev-> sb_size = (rdev->sb_size | bmask)+1; |
| |
| if (refdev == 0) |
| return 1; |
| else { |
| __u64 ev1, ev2; |
| struct mdp_superblock_1 *refsb = |
| (struct mdp_superblock_1*)page_address(refdev->sb_page); |
| |
| if (memcmp(sb->set_uuid, refsb->set_uuid, 16) != 0 || |
| sb->level != refsb->level || |
| sb->layout != refsb->layout || |
| sb->chunksize != refsb->chunksize) { |
| printk(KERN_WARNING "md: %s has strangely different" |
| " superblock to %s\n", |
| bdevname(rdev->bdev,b), |
| bdevname(refdev->bdev,b2)); |
| return -EINVAL; |
| } |
| ev1 = le64_to_cpu(sb->events); |
| ev2 = le64_to_cpu(refsb->events); |
| |
| if (ev1 > ev2) |
| return 1; |
| } |
| if (minor_version) |
| rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2; |
| else |
| rdev->size = rdev->sb_offset; |
| if (rdev->size < le64_to_cpu(sb->data_size)/2) |
| return -EINVAL; |
| rdev->size = le64_to_cpu(sb->data_size)/2; |
| if (le32_to_cpu(sb->chunksize)) |
| rdev->size &= ~((sector_t)le32_to_cpu(sb->chunksize)/2 - 1); |
| return 0; |
| } |
| |
| static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev) |
| { |
| struct mdp_superblock_1 *sb = (struct mdp_superblock_1*)page_address(rdev->sb_page); |
| |
| rdev->raid_disk = -1; |
| rdev->in_sync = 0; |
| if (mddev->raid_disks == 0) { |
| mddev->major_version = 1; |
| mddev->patch_version = 0; |
| mddev->persistent = 1; |
| mddev->chunk_size = le32_to_cpu(sb->chunksize) << 9; |
| mddev->ctime = le64_to_cpu(sb->ctime) & ((1ULL << 32)-1); |
| mddev->utime = le64_to_cpu(sb->utime) & ((1ULL << 32)-1); |
| mddev->level = le32_to_cpu(sb->level); |
| mddev->layout = le32_to_cpu(sb->layout); |
| mddev->raid_disks = le32_to_cpu(sb->raid_disks); |
| mddev->size = le64_to_cpu(sb->size)/2; |
| mddev->events = le64_to_cpu(sb->events); |
| mddev->bitmap_offset = 0; |
| mddev->default_bitmap_offset = 0; |
| mddev->default_bitmap_offset = 1024; |
| |
| mddev->recovery_cp = le64_to_cpu(sb->resync_offset); |
| memcpy(mddev->uuid, sb->set_uuid, 16); |
| |
| mddev->max_disks = (4096-256)/2; |
| |
| if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET) && |
| mddev->bitmap_file == NULL ) { |
| if (mddev->level != 1) { |
| printk(KERN_WARNING "md: bitmaps only supported for raid1\n"); |
| return -EINVAL; |
| } |
| mddev->bitmap_offset = (__s32)le32_to_cpu(sb->bitmap_offset); |
| } |
| } else if (mddev->pers == NULL) { |
| /* Insist of good event counter while assembling */ |
| __u64 ev1 = le64_to_cpu(sb->events); |
| ++ev1; |
| if (ev1 < mddev->events) |
| return -EINVAL; |
| } else if (mddev->bitmap) { |
| /* If adding to array with a bitmap, then we can accept an |
| * older device, but not too old. |
| */ |
| __u64 ev1 = le64_to_cpu(sb->events); |
| if (ev1 < mddev->bitmap->events_cleared) |
| return 0; |
| } else /* just a hot-add of a new device, leave raid_disk at -1 */ |
| return 0; |
| |
| if (mddev->level != LEVEL_MULTIPATH) { |
| int role; |
| rdev->desc_nr = le32_to_cpu(sb->dev_number); |
| role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]); |
| switch(role) { |
| case 0xffff: /* spare */ |
| rdev->faulty = 0; |
| break; |
| case 0xfffe: /* faulty */ |
| rdev->faulty = 1; |
| break; |
| default: |
| rdev->in_sync = 1; |
| rdev->faulty = 0; |
| rdev->raid_disk = role; |
| break; |
| } |
| rdev->flags = 0; |
| if (sb->devflags & WriteMostly1) |
| set_bit(WriteMostly, &rdev->flags); |
| } else /* MULTIPATH are always insync */ |
| rdev->in_sync = 1; |
| |
| return 0; |
| } |
| |
| static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) |
| { |
| struct mdp_superblock_1 *sb; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev2; |
| int max_dev, i; |
| /* make rdev->sb match mddev and rdev data. */ |
| |
| sb = (struct mdp_superblock_1*)page_address(rdev->sb_page); |
| |
| sb->feature_map = 0; |
| sb->pad0 = 0; |
| memset(sb->pad1, 0, sizeof(sb->pad1)); |
| memset(sb->pad2, 0, sizeof(sb->pad2)); |
| memset(sb->pad3, 0, sizeof(sb->pad3)); |
| |
| sb->utime = cpu_to_le64((__u64)mddev->utime); |
| sb->events = cpu_to_le64(mddev->events); |
| if (mddev->in_sync) |
| sb->resync_offset = cpu_to_le64(mddev->recovery_cp); |
| else |
| sb->resync_offset = cpu_to_le64(0); |
| |
| if (mddev->bitmap && mddev->bitmap_file == NULL) { |
| sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset); |
| sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET); |
| } |
| |
| max_dev = 0; |
| ITERATE_RDEV(mddev,rdev2,tmp) |
| if (rdev2->desc_nr+1 > max_dev) |
| max_dev = rdev2->desc_nr+1; |
| |
| sb->max_dev = cpu_to_le32(max_dev); |
| for (i=0; i<max_dev;i++) |
| sb->dev_roles[i] = cpu_to_le16(0xfffe); |
| |
| ITERATE_RDEV(mddev,rdev2,tmp) { |
| i = rdev2->desc_nr; |
| if (rdev2->faulty) |
| sb->dev_roles[i] = cpu_to_le16(0xfffe); |
| else if (rdev2->in_sync) |
| sb->dev_roles[i] = cpu_to_le16(rdev2->raid_disk); |
| else |
| sb->dev_roles[i] = cpu_to_le16(0xffff); |
| } |
| |
| sb->recovery_offset = cpu_to_le64(0); /* not supported yet */ |
| sb->sb_csum = calc_sb_1_csum(sb); |
| } |
| |
| |
| static struct super_type super_types[] = { |
| [0] = { |
| .name = "0.90.0", |
| .owner = THIS_MODULE, |
| .load_super = super_90_load, |
| .validate_super = super_90_validate, |
| .sync_super = super_90_sync, |
| }, |
| [1] = { |
| .name = "md-1", |
| .owner = THIS_MODULE, |
| .load_super = super_1_load, |
| .validate_super = super_1_validate, |
| .sync_super = super_1_sync, |
| }, |
| }; |
| |
| static mdk_rdev_t * match_dev_unit(mddev_t *mddev, mdk_rdev_t *dev) |
| { |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| |
| ITERATE_RDEV(mddev,rdev,tmp) |
| if (rdev->bdev->bd_contains == dev->bdev->bd_contains) |
| return rdev; |
| |
| return NULL; |
| } |
| |
| static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2) |
| { |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| |
| ITERATE_RDEV(mddev1,rdev,tmp) |
| if (match_dev_unit(mddev2, rdev)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static LIST_HEAD(pending_raid_disks); |
| |
| static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) |
| { |
| mdk_rdev_t *same_pdev; |
| char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE]; |
| |
| if (rdev->mddev) { |
| MD_BUG(); |
| return -EINVAL; |
| } |
| same_pdev = match_dev_unit(mddev, rdev); |
| if (same_pdev) |
| printk(KERN_WARNING |
| "%s: WARNING: %s appears to be on the same physical" |
| " disk as %s. True\n protection against single-disk" |
| " failure might be compromised.\n", |
| mdname(mddev), bdevname(rdev->bdev,b), |
| bdevname(same_pdev->bdev,b2)); |
| |
| /* Verify rdev->desc_nr is unique. |
| * If it is -1, assign a free number, else |
| * check number is not in use |
| */ |
| if (rdev->desc_nr < 0) { |
| int choice = 0; |
| if (mddev->pers) choice = mddev->raid_disks; |
| while (find_rdev_nr(mddev, choice)) |
| choice++; |
| rdev->desc_nr = choice; |
| } else { |
| if (find_rdev_nr(mddev, rdev->desc_nr)) |
| return -EBUSY; |
| } |
| |
| list_add(&rdev->same_set, &mddev->disks); |
| rdev->mddev = mddev; |
| printk(KERN_INFO "md: bind<%s>\n", bdevname(rdev->bdev,b)); |
| return 0; |
| } |
| |
| static void unbind_rdev_from_array(mdk_rdev_t * rdev) |
| { |
| char b[BDEVNAME_SIZE]; |
| if (!rdev->mddev) { |
| MD_BUG(); |
| return; |
| } |
| list_del_init(&rdev->same_set); |
| printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b)); |
| rdev->mddev = NULL; |
| } |
| |
| /* |
| * prevent the device from being mounted, repartitioned or |
| * otherwise reused by a RAID array (or any other kernel |
| * subsystem), by bd_claiming the device. |
| */ |
| static int lock_rdev(mdk_rdev_t *rdev, dev_t dev) |
| { |
| int err = 0; |
| struct block_device *bdev; |
| char b[BDEVNAME_SIZE]; |
| |
| bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE); |
| if (IS_ERR(bdev)) { |
| printk(KERN_ERR "md: could not open %s.\n", |
| __bdevname(dev, b)); |
| return PTR_ERR(bdev); |
| } |
| err = bd_claim(bdev, rdev); |
| if (err) { |
| printk(KERN_ERR "md: could not bd_claim %s.\n", |
| bdevname(bdev, b)); |
| blkdev_put(bdev); |
| return err; |
| } |
| rdev->bdev = bdev; |
| return err; |
| } |
| |
| static void unlock_rdev(mdk_rdev_t *rdev) |
| { |
| struct block_device *bdev = rdev->bdev; |
| rdev->bdev = NULL; |
| if (!bdev) |
| MD_BUG(); |
| bd_release(bdev); |
| blkdev_put(bdev); |
| } |
| |
| void md_autodetect_dev(dev_t dev); |
| |
| static void export_rdev(mdk_rdev_t * rdev) |
| { |
| char b[BDEVNAME_SIZE]; |
| printk(KERN_INFO "md: export_rdev(%s)\n", |
| bdevname(rdev->bdev,b)); |
| if (rdev->mddev) |
| MD_BUG(); |
| free_disk_sb(rdev); |
| list_del_init(&rdev->same_set); |
| #ifndef MODULE |
| md_autodetect_dev(rdev->bdev->bd_dev); |
| #endif |
| unlock_rdev(rdev); |
| kfree(rdev); |
| } |
| |
| static void kick_rdev_from_array(mdk_rdev_t * rdev) |
| { |
| unbind_rdev_from_array(rdev); |
| export_rdev(rdev); |
| } |
| |
| static void export_array(mddev_t *mddev) |
| { |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (!rdev->mddev) { |
| MD_BUG(); |
| continue; |
| } |
| kick_rdev_from_array(rdev); |
| } |
| if (!list_empty(&mddev->disks)) |
| MD_BUG(); |
| mddev->raid_disks = 0; |
| mddev->major_version = 0; |
| } |
| |
| static void print_desc(mdp_disk_t *desc) |
| { |
| printk(" DISK<N:%d,(%d,%d),R:%d,S:%d>\n", desc->number, |
| desc->major,desc->minor,desc->raid_disk,desc->state); |
| } |
| |
| static void print_sb(mdp_super_t *sb) |
| { |
| int i; |
| |
| printk(KERN_INFO |
| "md: SB: (V:%d.%d.%d) ID:<%08x.%08x.%08x.%08x> CT:%08x\n", |
| sb->major_version, sb->minor_version, sb->patch_version, |
| sb->set_uuid0, sb->set_uuid1, sb->set_uuid2, sb->set_uuid3, |
| sb->ctime); |
| printk(KERN_INFO "md: L%d S%08d ND:%d RD:%d md%d LO:%d CS:%d\n", |
| sb->level, sb->size, sb->nr_disks, sb->raid_disks, |
| sb->md_minor, sb->layout, sb->chunk_size); |
| printk(KERN_INFO "md: UT:%08x ST:%d AD:%d WD:%d" |
| " FD:%d SD:%d CSUM:%08x E:%08lx\n", |
| sb->utime, sb->state, sb->active_disks, sb->working_disks, |
| sb->failed_disks, sb->spare_disks, |
| sb->sb_csum, (unsigned long)sb->events_lo); |
| |
| printk(KERN_INFO); |
| for (i = 0; i < MD_SB_DISKS; i++) { |
| mdp_disk_t *desc; |
| |
| desc = sb->disks + i; |
| if (desc->number || desc->major || desc->minor || |
| desc->raid_disk || (desc->state && (desc->state != 4))) { |
| printk(" D %2d: ", i); |
| print_desc(desc); |
| } |
| } |
| printk(KERN_INFO "md: THIS: "); |
| print_desc(&sb->this_disk); |
| |
| } |
| |
| static void print_rdev(mdk_rdev_t *rdev) |
| { |
| char b[BDEVNAME_SIZE]; |
| printk(KERN_INFO "md: rdev %s, SZ:%08llu F:%d S:%d DN:%u\n", |
| bdevname(rdev->bdev,b), (unsigned long long)rdev->size, |
| rdev->faulty, rdev->in_sync, rdev->desc_nr); |
| if (rdev->sb_loaded) { |
| printk(KERN_INFO "md: rdev superblock:\n"); |
| print_sb((mdp_super_t*)page_address(rdev->sb_page)); |
| } else |
| printk(KERN_INFO "md: no rdev superblock!\n"); |
| } |
| |
| void md_print_devices(void) |
| { |
| struct list_head *tmp, *tmp2; |
| mdk_rdev_t *rdev; |
| mddev_t *mddev; |
| char b[BDEVNAME_SIZE]; |
| |
| printk("\n"); |
| printk("md: **********************************\n"); |
| printk("md: * <COMPLETE RAID STATE PRINTOUT> *\n"); |
| printk("md: **********************************\n"); |
| ITERATE_MDDEV(mddev,tmp) { |
| |
| if (mddev->bitmap) |
| bitmap_print_sb(mddev->bitmap); |
| else |
| printk("%s: ", mdname(mddev)); |
| ITERATE_RDEV(mddev,rdev,tmp2) |
| printk("<%s>", bdevname(rdev->bdev,b)); |
| printk("\n"); |
| |
| ITERATE_RDEV(mddev,rdev,tmp2) |
| print_rdev(rdev); |
| } |
| printk("md: **********************************\n"); |
| printk("\n"); |
| } |
| |
| |
| static void sync_sbs(mddev_t * mddev) |
| { |
| mdk_rdev_t *rdev; |
| struct list_head *tmp; |
| |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| super_types[mddev->major_version]. |
| sync_super(mddev, rdev); |
| rdev->sb_loaded = 1; |
| } |
| } |
| |
| static void md_update_sb(mddev_t * mddev) |
| { |
| int err; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| int sync_req; |
| |
| repeat: |
| spin_lock(&mddev->write_lock); |
| sync_req = mddev->in_sync; |
| mddev->utime = get_seconds(); |
| mddev->events ++; |
| |
| if (!mddev->events) { |
| /* |
| * oops, this 64-bit counter should never wrap. |
| * Either we are in around ~1 trillion A.C., assuming |
| * 1 reboot per second, or we have a bug: |
| */ |
| MD_BUG(); |
| mddev->events --; |
| } |
| mddev->sb_dirty = 2; |
| sync_sbs(mddev); |
| |
| /* |
| * do not write anything to disk if using |
| * nonpersistent superblocks |
| */ |
| if (!mddev->persistent) { |
| mddev->sb_dirty = 0; |
| spin_unlock(&mddev->write_lock); |
| wake_up(&mddev->sb_wait); |
| return; |
| } |
| spin_unlock(&mddev->write_lock); |
| |
| dprintk(KERN_INFO |
| "md: updating %s RAID superblock on device (in sync %d)\n", |
| mdname(mddev),mddev->in_sync); |
| |
| err = bitmap_update_sb(mddev->bitmap); |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| char b[BDEVNAME_SIZE]; |
| dprintk(KERN_INFO "md: "); |
| if (rdev->faulty) |
| dprintk("(skipping faulty "); |
| |
| dprintk("%s ", bdevname(rdev->bdev,b)); |
| if (!rdev->faulty) { |
| md_super_write(mddev,rdev, |
| rdev->sb_offset<<1, rdev->sb_size, |
| rdev->sb_page); |
| dprintk(KERN_INFO "(write) %s's sb offset: %llu\n", |
| bdevname(rdev->bdev,b), |
| (unsigned long long)rdev->sb_offset); |
| |
| } else |
| dprintk(")\n"); |
| if (mddev->level == LEVEL_MULTIPATH) |
| /* only need to write one superblock... */ |
| break; |
| } |
| wait_event(mddev->sb_wait, atomic_read(&mddev->pending_writes)==0); |
| /* if there was a failure, sb_dirty was set to 1, and we re-write super */ |
| |
| spin_lock(&mddev->write_lock); |
| if (mddev->in_sync != sync_req|| mddev->sb_dirty == 1) { |
| /* have to write it out again */ |
| spin_unlock(&mddev->write_lock); |
| goto repeat; |
| } |
| mddev->sb_dirty = 0; |
| spin_unlock(&mddev->write_lock); |
| wake_up(&mddev->sb_wait); |
| |
| } |
| |
| /* |
| * Import a device. If 'super_format' >= 0, then sanity check the superblock |
| * |
| * mark the device faulty if: |
| * |
| * - the device is nonexistent (zero size) |
| * - the device has no valid superblock |
| * |
| * a faulty rdev _never_ has rdev->sb set. |
| */ |
| static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_minor) |
| { |
| char b[BDEVNAME_SIZE]; |
| int err; |
| mdk_rdev_t *rdev; |
| sector_t size; |
| |
| rdev = (mdk_rdev_t *) kmalloc(sizeof(*rdev), GFP_KERNEL); |
| if (!rdev) { |
| printk(KERN_ERR "md: could not alloc mem for new device!\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| memset(rdev, 0, sizeof(*rdev)); |
| |
| if ((err = alloc_disk_sb(rdev))) |
| goto abort_free; |
| |
| err = lock_rdev(rdev, newdev); |
| if (err) |
| goto abort_free; |
| |
| rdev->desc_nr = -1; |
| rdev->faulty = 0; |
| rdev->in_sync = 0; |
| rdev->data_offset = 0; |
| atomic_set(&rdev->nr_pending, 0); |
| |
| size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS; |
| if (!size) { |
| printk(KERN_WARNING |
| "md: %s has zero or unknown size, marking faulty!\n", |
| bdevname(rdev->bdev,b)); |
| err = -EINVAL; |
| goto abort_free; |
| } |
| |
| if (super_format >= 0) { |
| err = super_types[super_format]. |
| load_super(rdev, NULL, super_minor); |
| if (err == -EINVAL) { |
| printk(KERN_WARNING |
| "md: %s has invalid sb, not importing!\n", |
| bdevname(rdev->bdev,b)); |
| goto abort_free; |
| } |
| if (err < 0) { |
| printk(KERN_WARNING |
| "md: could not read %s's sb, not importing!\n", |
| bdevname(rdev->bdev,b)); |
| goto abort_free; |
| } |
| } |
| INIT_LIST_HEAD(&rdev->same_set); |
| |
| return rdev; |
| |
| abort_free: |
| if (rdev->sb_page) { |
| if (rdev->bdev) |
| unlock_rdev(rdev); |
| free_disk_sb(rdev); |
| } |
| kfree(rdev); |
| return ERR_PTR(err); |
| } |
| |
| /* |
| * Check a full RAID array for plausibility |
| */ |
| |
| |
| static void analyze_sbs(mddev_t * mddev) |
| { |
| int i; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev, *freshest; |
| char b[BDEVNAME_SIZE]; |
| |
| freshest = NULL; |
| ITERATE_RDEV(mddev,rdev,tmp) |
| switch (super_types[mddev->major_version]. |
| load_super(rdev, freshest, mddev->minor_version)) { |
| case 1: |
| freshest = rdev; |
| break; |
| case 0: |
| break; |
| default: |
| printk( KERN_ERR \ |
| "md: fatal superblock inconsistency in %s" |
| " -- removing from array\n", |
| bdevname(rdev->bdev,b)); |
| kick_rdev_from_array(rdev); |
| } |
| |
| |
| super_types[mddev->major_version]. |
| validate_super(mddev, freshest); |
| |
| i = 0; |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (rdev != freshest) |
| if (super_types[mddev->major_version]. |
| validate_super(mddev, rdev)) { |
| printk(KERN_WARNING "md: kicking non-fresh %s" |
| " from array!\n", |
| bdevname(rdev->bdev,b)); |
| kick_rdev_from_array(rdev); |
| continue; |
| } |
| if (mddev->level == LEVEL_MULTIPATH) { |
| rdev->desc_nr = i++; |
| rdev->raid_disk = rdev->desc_nr; |
| rdev->in_sync = 1; |
| } |
| } |
| |
| |
| |
| if (mddev->recovery_cp != MaxSector && |
| mddev->level >= 1) |
| printk(KERN_ERR "md: %s: raid array is not clean" |
| " -- starting background reconstruction\n", |
| mdname(mddev)); |
| |
| } |
| |
| int mdp_major = 0; |
| |
| static struct kobject *md_probe(dev_t dev, int *part, void *data) |
| { |
| static DECLARE_MUTEX(disks_sem); |
| mddev_t *mddev = mddev_find(dev); |
| struct gendisk *disk; |
| int partitioned = (MAJOR(dev) != MD_MAJOR); |
| int shift = partitioned ? MdpMinorShift : 0; |
| int unit = MINOR(dev) >> shift; |
| |
| if (!mddev) |
| return NULL; |
| |
| down(&disks_sem); |
| if (mddev->gendisk) { |
| up(&disks_sem); |
| mddev_put(mddev); |
| return NULL; |
| } |
| disk = alloc_disk(1 << shift); |
| if (!disk) { |
| up(&disks_sem); |
| mddev_put(mddev); |
| return NULL; |
| } |
| disk->major = MAJOR(dev); |
| disk->first_minor = unit << shift; |
| if (partitioned) { |
| sprintf(disk->disk_name, "md_d%d", unit); |
| sprintf(disk->devfs_name, "md/d%d", unit); |
| } else { |
| sprintf(disk->disk_name, "md%d", unit); |
| sprintf(disk->devfs_name, "md/%d", unit); |
| } |
| disk->fops = &md_fops; |
| disk->private_data = mddev; |
| disk->queue = mddev->queue; |
| add_disk(disk); |
| mddev->gendisk = disk; |
| up(&disks_sem); |
| return NULL; |
| } |
| |
| void md_wakeup_thread(mdk_thread_t *thread); |
| |
| static void md_safemode_timeout(unsigned long data) |
| { |
| mddev_t *mddev = (mddev_t *) data; |
| |
| mddev->safemode = 1; |
| md_wakeup_thread(mddev->thread); |
| } |
| |
| |
| static int do_md_run(mddev_t * mddev) |
| { |
| int pnum, err; |
| int chunk_size; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev; |
| struct gendisk *disk; |
| char b[BDEVNAME_SIZE]; |
| |
| if (list_empty(&mddev->disks)) |
| /* cannot run an array with no devices.. */ |
| return -EINVAL; |
| |
| if (mddev->pers) |
| return -EBUSY; |
| |
| /* |
| * Analyze all RAID superblock(s) |
| */ |
| if (!mddev->raid_disks) |
| analyze_sbs(mddev); |
| |
| chunk_size = mddev->chunk_size; |
| pnum = level_to_pers(mddev->level); |
| |
| if ((pnum != MULTIPATH) && (pnum != RAID1)) { |
| if (!chunk_size) { |
| /* |
| * 'default chunksize' in the old md code used to |
| * be PAGE_SIZE, baaad. |
| * we abort here to be on the safe side. We don't |
| * want to continue the bad practice. |
| */ |
| printk(KERN_ERR |
| "no chunksize specified, see 'man raidtab'\n"); |
| return -EINVAL; |
| } |
| if (chunk_size > MAX_CHUNK_SIZE) { |
| printk(KERN_ERR "too big chunk_size: %d > %d\n", |
| chunk_size, MAX_CHUNK_SIZE); |
| return -EINVAL; |
| } |
| /* |
| * chunk-size has to be a power of 2 and multiples of PAGE_SIZE |
| */ |
| if ( (1 << ffz(~chunk_size)) != chunk_size) { |
| printk(KERN_ERR "chunk_size of %d not valid\n", chunk_size); |
| return -EINVAL; |
| } |
| if (chunk_size < PAGE_SIZE) { |
| printk(KERN_ERR "too small chunk_size: %d < %ld\n", |
| chunk_size, PAGE_SIZE); |
| return -EINVAL; |
| } |
| |
| /* devices must have minimum size of one chunk */ |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (rdev->faulty) |
| continue; |
| if (rdev->size < chunk_size / 1024) { |
| printk(KERN_WARNING |
| "md: Dev %s smaller than chunk_size:" |
| " %lluk < %dk\n", |
| bdevname(rdev->bdev,b), |
| (unsigned long long)rdev->size, |
| chunk_size / 1024); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_KMOD |
| if (!pers[pnum]) |
| { |
| request_module("md-personality-%d", pnum); |
| } |
| #endif |
| |
| /* |
| * Drop all container device buffers, from now on |
| * the only valid external interface is through the md |
| * device. |
| * Also find largest hardsector size |
| */ |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| if (rdev->faulty) |
| continue; |
| sync_blockdev(rdev->bdev); |
| invalidate_bdev(rdev->bdev, 0); |
| } |
| |
| md_probe(mddev->unit, NULL, NULL); |
| disk = mddev->gendisk; |
| if (!disk) |
| return -ENOMEM; |
| |
| spin_lock(&pers_lock); |
| if (!pers[pnum] || !try_module_get(pers[pnum]->owner)) { |
| spin_unlock(&pers_lock); |
| printk(KERN_WARNING "md: personality %d is not loaded!\n", |
| pnum); |
| return -EINVAL; |
| } |
| |
| mddev->pers = pers[pnum]; |
| spin_unlock(&pers_lock); |
| |
| mddev->recovery = 0; |
| mddev->resync_max_sectors = mddev->size << 1; /* may be over-ridden by personality */ |
| |
| /* before we start the array running, initialise the bitmap */ |
| err = bitmap_create(mddev); |
| if (err) |
| printk(KERN_ERR "%s: failed to create bitmap (%d)\n", |
| mdname(mddev), err); |
| else |
| err = mddev->pers->run(mddev); |
| if (err) { |
| printk(KERN_ERR "md: pers->run() failed ...\n"); |
| module_put(mddev->pers->owner); |
| mddev->pers = NULL; |
| bitmap_destroy(mddev); |
| return err; |
| } |
| atomic_set(&mddev->writes_pending,0); |
| mddev->safemode = 0; |
| mddev->safemode_timer.function = md_safemode_timeout; |
| mddev->safemode_timer.data = (unsigned long) mddev; |
| mddev->safemode_delay = (20 * HZ)/1000 +1; /* 20 msec delay */ |
| mddev->in_sync = 1; |
| |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| |
| if (mddev->sb_dirty) |
| md_update_sb(mddev); |
| |
| set_capacity(disk, mddev->array_size<<1); |
| |
| /* If we call blk_queue_make_request here, it will |
| * re-initialise max_sectors etc which may have been |
| * refined inside -> run. So just set the bits we need to set. |
| * Most initialisation happended when we called |
| * blk_queue_make_request(..., md_fail_request) |
| * earlier. |
| */ |
| mddev->queue->queuedata = mddev; |
| mddev->queue->make_request_fn = mddev->pers->make_request; |
| |
| mddev->changed = 1; |
| return 0; |
| } |
| |
| static int restart_array(mddev_t *mddev) |
| { |
| struct gendisk *disk = mddev->gendisk; |
| int err; |
| |
| /* |
| * Complain if it has no devices |
| */ |
| err = -ENXIO; |
| if (list_empty(&mddev->disks)) |
| goto out; |
| |
| if (mddev->pers) { |
| err = -EBUSY; |
| if (!mddev->ro) |
| goto out; |
| |
| mddev->safemode = 0; |
| mddev->ro = 0; |
| set_disk_ro(disk, 0); |
| |
| printk(KERN_INFO "md: %s switched to read-write mode.\n", |
| mdname(mddev)); |
| /* |
| * Kick recovery or resync if necessary |
| */ |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| err = 0; |
| } else { |
| printk(KERN_ERR "md: %s has no personality assigned.\n", |
| mdname(mddev)); |
| err = -EINVAL; |
| } |
| |
| out: |
| return err; |
| } |
| |
| static int do_md_stop(mddev_t * mddev, int ro) |
| { |
| int err = 0; |
| struct gendisk *disk = mddev->gendisk; |
| |
| if (mddev->pers) { |
| if (atomic_read(&mddev->active)>2) { |
| printk("md: %s still in use.\n",mdname(mddev)); |
| return -EBUSY; |
| } |
| |
| if (mddev->sync_thread) { |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| md_unregister_thread(mddev->sync_thread); |
| mddev->sync_thread = NULL; |
| } |
| |
| del_timer_sync(&mddev->safemode_timer); |
| |
| invalidate_partition(disk, 0); |
| |
| if (ro) { |
| err = -ENXIO; |
| if (mddev->ro) |
| goto out; |
| mddev->ro = 1; |
| } else { |
| bitmap_flush(mddev); |
| wait_event(mddev->sb_wait, atomic_read(&mddev->pending_writes)==0); |
| if (mddev->ro) |
| set_disk_ro(disk, 0); |
| blk_queue_make_request(mddev->queue, md_fail_request); |
| mddev->pers->stop(mddev); |
| module_put(mddev->pers->owner); |
| mddev->pers = NULL; |
| if (mddev->ro) |
| mddev->ro = 0; |
| } |
| if (!mddev->in_sync) { |
| /* mark array as shutdown cleanly */ |
| mddev->in_sync = 1; |
| md_update_sb(mddev); |
| } |
| if (ro) |
| set_disk_ro(disk, 1); |
| } |
| |
| bitmap_destroy(mddev); |
| if (mddev->bitmap_file) { |
| atomic_set(&mddev->bitmap_file->f_dentry->d_inode->i_writecount, 1); |
| fput(mddev->bitmap_file); |
| mddev->bitmap_file = NULL; |
| } |
| mddev->bitmap_offset = 0; |
| |
| /* |
| * Free resources if final stop |
| */ |
| if (!ro) { |
| struct gendisk *disk; |
| printk(KERN_INFO "md: %s stopped.\n", mdname(mddev)); |
| |
| export_array(mddev); |
| |
| mddev->array_size = 0; |
| disk = mddev->gendisk; |
| if (disk) |
| set_capacity(disk, 0); |
| mddev->changed = 1; |
| } else |
| printk(KERN_INFO "md: %s switched to read-only mode.\n", |
| mdname(mddev)); |
| err = 0; |
| out: |
| return err; |
| } |
| |
| static void autorun_array(mddev_t *mddev) |
| { |
| mdk_rdev_t *rdev; |
| struct list_head *tmp; |
| int err; |
| |
| if (list_empty(&mddev->disks)) |
| return; |
| |
| printk(KERN_INFO "md: running: "); |
| |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| char b[BDEVNAME_SIZE]; |
| printk("<%s>", bdevname(rdev->bdev,b)); |
| } |
| printk("\n"); |
| |
| err = do_md_run (mddev); |
| if (err) { |
| printk(KERN_WARNING "md: do_md_run() returned %d\n", err); |
| do_md_stop (mddev, 0); |
| } |
| } |
| |
| /* |
| * lets try to run arrays based on all disks that have arrived |
| * until now. (those are in pending_raid_disks) |
| * |
| * the method: pick the first pending disk, collect all disks with |
| * the same UUID, remove all from the pending list and put them into |
| * the 'same_array' list. Then order this list based on superblock |
| * update time (freshest comes first), kick out 'old' disks and |
| * compare superblocks. If everything's fine then run it. |
| * |
| * If "unit" is allocated, then bump its reference count |
| */ |
| static void autorun_devices(int part) |
| { |
| struct list_head candidates; |
| struct list_head *tmp; |
| mdk_rdev_t *rdev0, *rdev; |
| mddev_t *mddev; |
| char b[BDEVNAME_SIZE]; |
| |
| printk(KERN_INFO "md: autorun ...\n"); |
| while (!list_empty(&pending_raid_disks)) { |
| dev_t dev; |
| rdev0 = list_entry(pending_raid_disks.next, |
| mdk_rdev_t, same_set); |
| |
| printk(KERN_INFO "md: considering %s ...\n", |
| bdevname(rdev0->bdev,b)); |
| INIT_LIST_HEAD(&candidates); |
| ITERATE_RDEV_PENDING(rdev,tmp) |
| if (super_90_load(rdev, rdev0, 0) >= 0) { |
| printk(KERN_INFO "md: adding %s ...\n", |
| bdevname(rdev->bdev,b)); |
| list_move(&rdev->same_set, &candidates); |
| } |
| /* |
| * now we have a set of devices, with all of them having |
| * mostly sane superblocks. It's time to allocate the |
| * mddev. |
| */ |
| if (rdev0->preferred_minor < 0 || rdev0->preferred_minor >= MAX_MD_DEVS) { |
| printk(KERN_INFO "md: unit number in %s is bad: %d\n", |
| bdevname(rdev0->bdev, b), rdev0->preferred_minor); |
| break; |
| } |
| if (part) |
| dev = MKDEV(mdp_major, |
| rdev0->preferred_minor << MdpMinorShift); |
| else |
| dev = MKDEV(MD_MAJOR, rdev0->preferred_minor); |
| |
| md_probe(dev, NULL, NULL); |
| mddev = mddev_find(dev); |
| if (!mddev) { |
| printk(KERN_ERR |
| "md: cannot allocate memory for md drive.\n"); |
| break; |
| } |
| if (mddev_lock(mddev)) |
| printk(KERN_WARNING "md: %s locked, cannot run\n", |
| mdname(mddev)); |
| else if (mddev->raid_disks || mddev->major_version |
| || !list_empty(&mddev->disks)) { |
| printk(KERN_WARNING |
| "md: %s already running, cannot run %s\n", |
| mdname(mddev), bdevname(rdev0->bdev,b)); |
| mddev_unlock(mddev); |
| } else { |
| printk(KERN_INFO "md: created %s\n", mdname(mddev)); |
| ITERATE_RDEV_GENERIC(candidates,rdev,tmp) { |
| list_del_init(&rdev->same_set); |
| if (bind_rdev_to_array(rdev, mddev)) |
| export_rdev(rdev); |
| } |
| autorun_array(mddev); |
| mddev_unlock(mddev); |
| } |
| /* on success, candidates will be empty, on error |
| * it won't... |
| */ |
| ITERATE_RDEV_GENERIC(candidates,rdev,tmp) |
| export_rdev(rdev); |
| mddev_put(mddev); |
| } |
| printk(KERN_INFO "md: ... autorun DONE.\n"); |
| } |
| |
| /* |
| * import RAID devices based on one partition |
| * if possible, the array gets run as well. |
| */ |
| |
| static int autostart_array(dev_t startdev) |
| { |
| char b[BDEVNAME_SIZE]; |
| int err = -EINVAL, i; |
| mdp_super_t *sb = NULL; |
| mdk_rdev_t *start_rdev = NULL, *rdev; |
| |
| start_rdev = md_import_device(startdev, 0, 0); |
| if (IS_ERR(start_rdev)) |
| return err; |
| |
| |
| /* NOTE: this can only work for 0.90.0 superblocks */ |
| sb = (mdp_super_t*)page_address(start_rdev->sb_page); |
| if (sb->major_version != 0 || |
| sb->minor_version != 90 ) { |
| printk(KERN_WARNING "md: can only autostart 0.90.0 arrays\n"); |
| export_rdev(start_rdev); |
| return err; |
| } |
| |
| if (start_rdev->faulty) { |
| printk(KERN_WARNING |
| "md: can not autostart based on faulty %s!\n", |
| bdevname(start_rdev->bdev,b)); |
| export_rdev(start_rdev); |
| return err; |
| } |
| list_add(&start_rdev->same_set, &pending_raid_disks); |
| |
| for (i = 0; i < MD_SB_DISKS; i++) { |
| mdp_disk_t *desc = sb->disks + i; |
| dev_t dev = MKDEV(desc->major, desc->minor); |
| |
| if (!dev) |
| continue; |
| if (dev == startdev) |
| continue; |
| if (MAJOR(dev) != desc->major || MINOR(dev) != desc->minor) |
| continue; |
| rdev = md_import_device(dev, 0, 0); |
| if (IS_ERR(rdev)) |
| continue; |
| |
| list_add(&rdev->same_set, &pending_raid_disks); |
| } |
| |
| /* |
| * possibly return codes |
| */ |
| autorun_devices(0); |
| return 0; |
| |
| } |
| |
| |
| static int get_version(void __user * arg) |
| { |
| mdu_version_t ver; |
| |
| ver.major = MD_MAJOR_VERSION; |
| ver.minor = MD_MINOR_VERSION; |
| ver.patchlevel = MD_PATCHLEVEL_VERSION; |
| |
| if (copy_to_user(arg, &ver, sizeof(ver))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int get_array_info(mddev_t * mddev, void __user * arg) |
| { |
| mdu_array_info_t info; |
| int nr,working,active,failed,spare; |
| mdk_rdev_t *rdev; |
| struct list_head *tmp; |
| |
| nr=working=active=failed=spare=0; |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| nr++; |
| if (rdev->faulty) |
| failed++; |
| else { |
| working++; |
| if (rdev->in_sync) |
| active++; |
| else |
| spare++; |
| } |
| } |
| |
| info.major_version = mddev->major_version; |
| info.minor_version = mddev->minor_version; |
| info.patch_version = MD_PATCHLEVEL_VERSION; |
| info.ctime = mddev->ctime; |
| info.level = mddev->level; |
| info.size = mddev->size; |
| info.nr_disks = nr; |
| info.raid_disks = mddev->raid_disks; |
| info.md_minor = mddev->md_minor; |
| info.not_persistent= !mddev->persistent; |
| |
| info.utime = mddev->utime; |
| info.state = 0; |
| if (mddev->in_sync) |
| info.state = (1<<MD_SB_CLEAN); |
| if (mddev->bitmap && mddev->bitmap_offset) |
| info.state = (1<<MD_SB_BITMAP_PRESENT); |
| info.active_disks = active; |
| info.working_disks = working; |
| info.failed_disks = failed; |
| info.spare_disks = spare; |
| |
| info.layout = mddev->layout; |
| info.chunk_size = mddev->chunk_size; |
| |
| if (copy_to_user(arg, &info, sizeof(info))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int get_bitmap_file(mddev_t * mddev, void __user * arg) |
| { |
| mdu_bitmap_file_t *file = NULL; /* too big for stack allocation */ |
| char *ptr, *buf = NULL; |
| int err = -ENOMEM; |
| |
| file = kmalloc(sizeof(*file), GFP_KERNEL); |
| if (!file) |
| goto out; |
| |
| /* bitmap disabled, zero the first byte and copy out */ |
| if (!mddev->bitmap || !mddev->bitmap->file) { |
| file->pathname[0] = '\0'; |
| goto copy_out; |
| } |
| |
| buf = kmalloc(sizeof(file->pathname), GFP_KERNEL); |
| if (!buf) |
| goto out; |
| |
| ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname)); |
| if (!ptr) |
| goto out; |
| |
| strcpy(file->pathname, ptr); |
| |
| copy_out: |
| err = 0; |
| if (copy_to_user(arg, file, sizeof(*file))) |
| err = -EFAULT; |
| out: |
| kfree(buf); |
| kfree(file); |
| return err; |
| } |
| |
| static int get_disk_info(mddev_t * mddev, void __user * arg) |
| { |
| mdu_disk_info_t info; |
| unsigned int nr; |
| mdk_rdev_t *rdev; |
| |
| if (copy_from_user(&info, arg, sizeof(info))) |
| return -EFAULT; |
| |
| nr = info.number; |
| |
| rdev = find_rdev_nr(mddev, nr); |
| if (rdev) { |
| info.major = MAJOR(rdev->bdev->bd_dev); |
| info.minor = MINOR(rdev->bdev->bd_dev); |
| info.raid_disk = rdev->raid_disk; |
| info.state = 0; |
| if (rdev->faulty) |
| info.state |= (1<<MD_DISK_FAULTY); |
| else if (rdev->in_sync) { |
| info.state |= (1<<MD_DISK_ACTIVE); |
| info.state |= (1<<MD_DISK_SYNC); |
| } |
| if (test_bit(WriteMostly, &rdev->flags)) |
| info.state |= (1<<MD_DISK_WRITEMOSTLY); |
| } else { |
| info.major = info.minor = 0; |
| info.raid_disk = -1; |
| info.state = (1<<MD_DISK_REMOVED); |
| } |
| |
| if (copy_to_user(arg, &info, sizeof(info))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) |
| { |
| char b[BDEVNAME_SIZE], b2[BDEVNAME_SIZE]; |
| mdk_rdev_t *rdev; |
| dev_t dev = MKDEV(info->major,info->minor); |
| |
| if (info->major != MAJOR(dev) || info->minor != MINOR(dev)) |
| return -EOVERFLOW; |
| |
| if (!mddev->raid_disks) { |
| int err; |
| /* expecting a device which has a superblock */ |
| rdev = md_import_device(dev, mddev->major_version, mddev->minor_version); |
| if (IS_ERR(rdev)) { |
| printk(KERN_WARNING |
| "md: md_import_device returned %ld\n", |
| PTR_ERR(rdev)); |
| return PTR_ERR(rdev); |
| } |
| if (!list_empty(&mddev->disks)) { |
| mdk_rdev_t *rdev0 = list_entry(mddev->disks.next, |
| mdk_rdev_t, same_set); |
| int err = super_types[mddev->major_version] |
| .load_super(rdev, rdev0, mddev->minor_version); |
| if (err < 0) { |
| printk(KERN_WARNING |
| "md: %s has different UUID to %s\n", |
| bdevname(rdev->bdev,b), |
| bdevname(rdev0->bdev,b2)); |
| export_rdev(rdev); |
| return -EINVAL; |
| } |
| } |
| err = bind_rdev_to_array(rdev, mddev); |
| if (err) |
| export_rdev(rdev); |
| return err; |
| } |
| |
| /* |
| * add_new_disk can be used once the array is assembled |
| * to add "hot spares". They must already have a superblock |
| * written |
| */ |
| if (mddev->pers) { |
| int err; |
| if (!mddev->pers->hot_add_disk) { |
| printk(KERN_WARNING |
| "%s: personality does not support diskops!\n", |
| mdname(mddev)); |
| return -EINVAL; |
| } |
| if (mddev->persistent) |
| rdev = md_import_device(dev, mddev->major_version, |
| mddev->minor_version); |
| else |
| rdev = md_import_device(dev, -1, -1); |
| if (IS_ERR(rdev)) { |
| printk(KERN_WARNING |
| "md: md_import_device returned %ld\n", |
| PTR_ERR(rdev)); |
| return PTR_ERR(rdev); |
| } |
| /* set save_raid_disk if appropriate */ |
| if (!mddev->persistent) { |
| if (info->state & (1<<MD_DISK_SYNC) && |
| info->raid_disk < mddev->raid_disks) |
| rdev->raid_disk = info->raid_disk; |
| else |
| rdev->raid_disk = -1; |
| } else |
| super_types[mddev->major_version]. |
| validate_super(mddev, rdev); |
| rdev->saved_raid_disk = rdev->raid_disk; |
| |
| rdev->in_sync = 0; /* just to be sure */ |
| if (info->state & (1<<MD_DISK_WRITEMOSTLY)) |
| set_bit(WriteMostly, &rdev->flags); |
| |
| rdev->raid_disk = -1; |
| err = bind_rdev_to_array(rdev, mddev); |
| if (err) |
| export_rdev(rdev); |
| |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| return err; |
| } |
| |
| /* otherwise, add_new_disk is only allowed |
| * for major_version==0 superblocks |
| */ |
| if (mddev->major_version != 0) { |
| printk(KERN_WARNING "%s: ADD_NEW_DISK not supported\n", |
| mdname(mddev)); |
| return -EINVAL; |
| } |
| |
| if (!(info->state & (1<<MD_DISK_FAULTY))) { |
| int err; |
| rdev = md_import_device (dev, -1, 0); |
| if (IS_ERR(rdev)) { |
| printk(KERN_WARNING |
| "md: error, md_import_device() returned %ld\n", |
| PTR_ERR(rdev)); |
| return PTR_ERR(rdev); |
| } |
| rdev->desc_nr = info->number; |
| if (info->raid_disk < mddev->raid_disks) |
| rdev->raid_disk = info->raid_disk; |
| else |
| rdev->raid_disk = -1; |
| |
| rdev->faulty = 0; |
| if (rdev->raid_disk < mddev->raid_disks) |
| rdev->in_sync = (info->state & (1<<MD_DISK_SYNC)); |
| else |
| rdev->in_sync = 0; |
| |
| if (info->state & (1<<MD_DISK_WRITEMOSTLY)) |
| set_bit(WriteMostly, &rdev->flags); |
| |
| err = bind_rdev_to_array(rdev, mddev); |
| if (err) { |
| export_rdev(rdev); |
| return err; |
| } |
| |
| if (!mddev->persistent) { |
| printk(KERN_INFO "md: nonpersistent superblock ...\n"); |
| rdev->sb_offset = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS; |
| } else |
| rdev->sb_offset = calc_dev_sboffset(rdev->bdev); |
| rdev->size = calc_dev_size(rdev, mddev->chunk_size); |
| |
| if (!mddev->size || (mddev->size > rdev->size)) |
| mddev->size = rdev->size; |
| } |
| |
| return 0; |
| } |
| |
| static int hot_remove_disk(mddev_t * mddev, dev_t dev) |
| { |
| char b[BDEVNAME_SIZE]; |
| mdk_rdev_t *rdev; |
| |
| if (!mddev->pers) |
| return -ENODEV; |
| |
| rdev = find_rdev(mddev, dev); |
| if (!rdev) |
| return -ENXIO; |
| |
| if (rdev->raid_disk >= 0) |
| goto busy; |
| |
| kick_rdev_from_array(rdev); |
| md_update_sb(mddev); |
| |
| return 0; |
| busy: |
| printk(KERN_WARNING "md: cannot remove active disk %s from %s ... \n", |
| bdevname(rdev->bdev,b), mdname(mddev)); |
| return -EBUSY; |
| } |
| |
| static int hot_add_disk(mddev_t * mddev, dev_t dev) |
| { |
| char b[BDEVNAME_SIZE]; |
| int err; |
| unsigned int size; |
| mdk_rdev_t *rdev; |
| |
| if (!mddev->pers) |
| return -ENODEV; |
| |
| if (mddev->major_version != 0) { |
| printk(KERN_WARNING "%s: HOT_ADD may only be used with" |
| " version-0 superblocks.\n", |
| mdname(mddev)); |
| return -EINVAL; |
| } |
| if (!mddev->pers->hot_add_disk) { |
| printk(KERN_WARNING |
| "%s: personality does not support diskops!\n", |
| mdname(mddev)); |
| return -EINVAL; |
| } |
| |
| rdev = md_import_device (dev, -1, 0); |
| if (IS_ERR(rdev)) { |
| printk(KERN_WARNING |
| "md: error, md_import_device() returned %ld\n", |
| PTR_ERR(rdev)); |
| return -EINVAL; |
| } |
| |
| if (mddev->persistent) |
| rdev->sb_offset = calc_dev_sboffset(rdev->bdev); |
| else |
| rdev->sb_offset = |
| rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS; |
| |
| size = calc_dev_size(rdev, mddev->chunk_size); |
| rdev->size = size; |
| |
| if (size < mddev->size) { |
| printk(KERN_WARNING |
| "%s: disk size %llu blocks < array size %llu\n", |
| mdname(mddev), (unsigned long long)size, |
| (unsigned long long)mddev->size); |
| err = -ENOSPC; |
| goto abort_export; |
| } |
| |
| if (rdev->faulty) { |
| printk(KERN_WARNING |
| "md: can not hot-add faulty %s disk to %s!\n", |
| bdevname(rdev->bdev,b), mdname(mddev)); |
| err = -EINVAL; |
| goto abort_export; |
| } |
| rdev->in_sync = 0; |
| rdev->desc_nr = -1; |
| bind_rdev_to_array(rdev, mddev); |
| |
| /* |
| * The rest should better be atomic, we can have disk failures |
| * noticed in interrupt contexts ... |
| */ |
| |
| if (rdev->desc_nr == mddev->max_disks) { |
| printk(KERN_WARNING "%s: can not hot-add to full array!\n", |
| mdname(mddev)); |
| err = -EBUSY; |
| goto abort_unbind_export; |
| } |
| |
| rdev->raid_disk = -1; |
| |
| md_update_sb(mddev); |
| |
| /* |
| * Kick recovery, maybe this spare has to be added to the |
| * array immediately. |
| */ |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| |
| return 0; |
| |
| abort_unbind_export: |
| unbind_rdev_from_array(rdev); |
| |
| abort_export: |
| export_rdev(rdev); |
| return err; |
| } |
| |
| /* similar to deny_write_access, but accounts for our holding a reference |
| * to the file ourselves */ |
| static int deny_bitmap_write_access(struct file * file) |
| { |
| struct inode *inode = file->f_mapping->host; |
| |
| spin_lock(&inode->i_lock); |
| if (atomic_read(&inode->i_writecount) > 1) { |
| spin_unlock(&inode->i_lock); |
| return -ETXTBSY; |
| } |
| atomic_set(&inode->i_writecount, -1); |
| spin_unlock(&inode->i_lock); |
| |
| return 0; |
| } |
| |
| static int set_bitmap_file(mddev_t *mddev, int fd) |
| { |
| int err; |
| |
| if (mddev->pers) { |
| if (!mddev->pers->quiesce) |
| return -EBUSY; |
| if (mddev->recovery || mddev->sync_thread) |
| return -EBUSY; |
| /* we should be able to change the bitmap.. */ |
| } |
| |
| |
| if (fd >= 0) { |
| if (mddev->bitmap) |
| return -EEXIST; /* cannot add when bitmap is present */ |
| mddev->bitmap_file = fget(fd); |
| |
| if (mddev->bitmap_file == NULL) { |
| printk(KERN_ERR "%s: error: failed to get bitmap file\n", |
| mdname(mddev)); |
| return -EBADF; |
| } |
| |
| err = deny_bitmap_write_access(mddev->bitmap_file); |
| if (err) { |
| printk(KERN_ERR "%s: error: bitmap file is already in use\n", |
| mdname(mddev)); |
| fput(mddev->bitmap_file); |
| mddev->bitmap_file = NULL; |
| return err; |
| } |
| mddev->bitmap_offset = 0; /* file overrides offset */ |
| } else if (mddev->bitmap == NULL) |
| return -ENOENT; /* cannot remove what isn't there */ |
| err = 0; |
| if (mddev->pers) { |
| mddev->pers->quiesce(mddev, 1); |
| if (fd >= 0) |
| err = bitmap_create(mddev); |
| if (fd < 0 || err) |
| bitmap_destroy(mddev); |
| mddev->pers->quiesce(mddev, 0); |
| } else if (fd < 0) { |
| if (mddev->bitmap_file) |
| fput(mddev->bitmap_file); |
| mddev->bitmap_file = NULL; |
| } |
| |
| return err; |
| } |
| |
| /* |
| * set_array_info is used two different ways |
| * The original usage is when creating a new array. |
| * In this usage, raid_disks is > 0 and it together with |
| * level, size, not_persistent,layout,chunksize determine the |
| * shape of the array. |
| * This will always create an array with a type-0.90.0 superblock. |
| * The newer usage is when assembling an array. |
| * In this case raid_disks will be 0, and the major_version field is |
| * use to determine which style super-blocks are to be found on the devices. |
| * The minor and patch _version numbers are also kept incase the |
| * super_block handler wishes to interpret them. |
| */ |
| static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) |
| { |
| |
| if (info->raid_disks == 0) { |
| /* just setting version number for superblock loading */ |
| if (info->major_version < 0 || |
| info->major_version >= sizeof(super_types)/sizeof(super_types[0]) || |
| super_types[info->major_version].name == NULL) { |
| /* maybe try to auto-load a module? */ |
| printk(KERN_INFO |
| "md: superblock version %d not known\n", |
| info->major_version); |
| return -EINVAL; |
| } |
| mddev->major_version = info->major_version; |
| mddev->minor_version = info->minor_version; |
| mddev->patch_version = info->patch_version; |
| return 0; |
| } |
| mddev->major_version = MD_MAJOR_VERSION; |
| mddev->minor_version = MD_MINOR_VERSION; |
| mddev->patch_version = MD_PATCHLEVEL_VERSION; |
| mddev->ctime = get_seconds(); |
| |
| mddev->level = info->level; |
| mddev->size = info->size; |
| mddev->raid_disks = info->raid_disks; |
| /* don't set md_minor, it is determined by which /dev/md* was |
| * openned |
| */ |
| if (info->state & (1<<MD_SB_CLEAN)) |
| mddev->recovery_cp = MaxSector; |
| else |
| mddev->recovery_cp = 0; |
| mddev->persistent = ! info->not_persistent; |
| |
| mddev->layout = info->layout; |
| mddev->chunk_size = info->chunk_size; |
| |
| mddev->max_disks = MD_SB_DISKS; |
| |
| mddev->sb_dirty = 1; |
| |
| /* |
| * Generate a 128 bit UUID |
| */ |
| get_random_bytes(mddev->uuid, 16); |
| |
| return 0; |
| } |
| |
| /* |
| * update_array_info is used to change the configuration of an |
| * on-line array. |
| * The version, ctime,level,size,raid_disks,not_persistent, layout,chunk_size |
| * fields in the info are checked against the array. |
| * Any differences that cannot be handled will cause an error. |
| * Normally, only one change can be managed at a time. |
| */ |
| static int update_array_info(mddev_t *mddev, mdu_array_info_t *info) |
| { |
| int rv = 0; |
| int cnt = 0; |
| int state = 0; |
| |
| /* calculate expected state,ignoring low bits */ |
| if (mddev->bitmap && mddev->bitmap_offset) |
| state |= (1 << MD_SB_BITMAP_PRESENT); |
| |
| if (mddev->major_version != info->major_version || |
| mddev->minor_version != info->minor_version || |
| /* mddev->patch_version != info->patch_version || */ |
| mddev->ctime != info->ctime || |
| mddev->level != info->level || |
| /* mddev->layout != info->layout || */ |
| !mddev->persistent != info->not_persistent|| |
| mddev->chunk_size != info->chunk_size || |
| /* ignore bottom 8 bits of state, and allow SB_BITMAP_PRESENT to change */ |
| ((state^info->state) & 0xfffffe00) |
| ) |
| return -EINVAL; |
| /* Check there is only one change */ |
| if (mddev->size != info->size) cnt++; |
| if (mddev->raid_disks != info->raid_disks) cnt++; |
| if (mddev->layout != info->layout) cnt++; |
| if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) cnt++; |
| if (cnt == 0) return 0; |
| if (cnt > 1) return -EINVAL; |
| |
| if (mddev->layout != info->layout) { |
| /* Change layout |
| * we don't need to do anything at the md level, the |
| * personality will take care of it all. |
| */ |
| if (mddev->pers->reconfig == NULL) |
| return -EINVAL; |
| else |
| return mddev->pers->reconfig(mddev, info->layout, -1); |
| } |
| if (mddev->size != info->size) { |
| mdk_rdev_t * rdev; |
| struct list_head *tmp; |
| if (mddev->pers->resize == NULL) |
| return -EINVAL; |
| /* The "size" is the amount of each device that is used. |
| * This can only make sense for arrays with redundancy. |
| * linear and raid0 always use whatever space is available |
| * We can only consider changing the size if no resync |
| * or reconstruction is happening, and if the new size |
| * is acceptable. It must fit before the sb_offset or, |
| * if that is <data_offset, it must fit before the |
| * size of each device. |
| * If size is zero, we find the largest size that fits. |
| */ |
| if (mddev->sync_thread) |
| return -EBUSY; |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| sector_t avail; |
| int fit = (info->size == 0); |
| if (rdev->sb_offset > rdev->data_offset) |
| avail = (rdev->sb_offset*2) - rdev->data_offset; |
| else |
| avail = get_capacity(rdev->bdev->bd_disk) |
| - rdev->data_offset; |
| if (fit && (info->size == 0 || info->size > avail/2)) |
| info->size = avail/2; |
| if (avail < ((sector_t)info->size << 1)) |
| return -ENOSPC; |
| } |
| rv = mddev->pers->resize(mddev, (sector_t)info->size *2); |
| if (!rv) { |
| struct block_device *bdev; |
| |
| bdev = bdget_disk(mddev->gendisk, 0); |
| if (bdev) { |
| down(&bdev->bd_inode->i_sem); |
| i_size_write(bdev->bd_inode, mddev->array_size << 10); |
| up(&bdev->bd_inode->i_sem); |
| bdput(bdev); |
| } |
| } |
| } |
| if (mddev->raid_disks != info->raid_disks) { |
| /* change the number of raid disks */ |
| if (mddev->pers->reshape == NULL) |
| return -EINVAL; |
| if (info->raid_disks <= 0 || |
| info->raid_disks >= mddev->max_disks) |
| return -EINVAL; |
| if (mddev->sync_thread) |
| return -EBUSY; |
| rv = mddev->pers->reshape(mddev, info->raid_disks); |
| if (!rv) { |
| struct block_device *bdev; |
| |
| bdev = bdget_disk(mddev->gendisk, 0); |
| if (bdev) { |
| down(&bdev->bd_inode->i_sem); |
| i_size_write(bdev->bd_inode, mddev->array_size << 10); |
| up(&bdev->bd_inode->i_sem); |
| bdput(bdev); |
| } |
| } |
| } |
| if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) { |
| if (mddev->pers->quiesce == NULL) |
| return -EINVAL; |
| if (mddev->recovery || mddev->sync_thread) |
| return -EBUSY; |
| if (info->state & (1<<MD_SB_BITMAP_PRESENT)) { |
| /* add the bitmap */ |
| if (mddev->bitmap) |
| return -EEXIST; |
| if (mddev->default_bitmap_offset == 0) |
| return -EINVAL; |
| mddev->bitmap_offset = mddev->default_bitmap_offset; |
| mddev->pers->quiesce(mddev, 1); |
| rv = bitmap_create(mddev); |
| if (rv) |
| bitmap_destroy(mddev); |
| mddev->pers->quiesce(mddev, 0); |
| } else { |
| /* remove the bitmap */ |
| if (!mddev->bitmap) |
| return -ENOENT; |
| if (mddev->bitmap->file) |
| return -EINVAL; |
| mddev->pers->quiesce(mddev, 1); |
| bitmap_destroy(mddev); |
| mddev->pers->quiesce(mddev, 0); |
| mddev->bitmap_offset = 0; |
| } |
| } |
| md_update_sb(mddev); |
| return rv; |
| } |
| |
| static int set_disk_faulty(mddev_t *mddev, dev_t dev) |
| { |
| mdk_rdev_t *rdev; |
| |
| if (mddev->pers == NULL) |
| return -ENODEV; |
| |
| rdev = find_rdev(mddev, dev); |
| if (!rdev) |
| return -ENODEV; |
| |
| md_error(mddev, rdev); |
| return 0; |
| } |
| |
| static int md_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int err = 0; |
| void __user *argp = (void __user *)arg; |
| struct hd_geometry __user *loc = argp; |
| mddev_t *mddev = NULL; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| /* |
| * Commands dealing with the RAID driver but not any |
| * particular array: |
| */ |
| switch (cmd) |
| { |
| case RAID_VERSION: |
| err = get_version(argp); |
| goto done; |
| |
| case PRINT_RAID_DEBUG: |
| err = 0; |
| md_print_devices(); |
| goto done; |
| |
| #ifndef MODULE |
| case RAID_AUTORUN: |
| err = 0; |
| autostart_arrays(arg); |
| goto done; |
| #endif |
| default:; |
| } |
| |
| /* |
| * Commands creating/starting a new array: |
| */ |
| |
| mddev = inode->i_bdev->bd_disk->private_data; |
| |
| if (!mddev) { |
| BUG(); |
| goto abort; |
| } |
| |
| |
| if (cmd == START_ARRAY) { |
| /* START_ARRAY doesn't need to lock the array as autostart_array |
| * does the locking, and it could even be a different array |
| */ |
| static int cnt = 3; |
| if (cnt > 0 ) { |
| printk(KERN_WARNING |
| "md: %s(pid %d) used deprecated START_ARRAY ioctl. " |
| "This will not be supported beyond 2.6\n", |
| current->comm, current->pid); |
| cnt--; |
| } |
| err = autostart_array(new_decode_dev(arg)); |
| if (err) { |
| printk(KERN_WARNING "md: autostart failed!\n"); |
| goto abort; |
| } |
| goto done; |
| } |
| |
| err = mddev_lock(mddev); |
| if (err) { |
| printk(KERN_INFO |
| "md: ioctl lock interrupted, reason %d, cmd %d\n", |
| err, cmd); |
| goto abort; |
| } |
| |
| switch (cmd) |
| { |
| case SET_ARRAY_INFO: |
| { |
| mdu_array_info_t info; |
| if (!arg) |
| memset(&info, 0, sizeof(info)); |
| else if (copy_from_user(&info, argp, sizeof(info))) { |
| err = -EFAULT; |
| goto abort_unlock; |
| } |
| if (mddev->pers) { |
| err = update_array_info(mddev, &info); |
| if (err) { |
| printk(KERN_WARNING "md: couldn't update" |
| " array info. %d\n", err); |
| goto abort_unlock; |
| } |
| goto done_unlock; |
| } |
| if (!list_empty(&mddev->disks)) { |
| printk(KERN_WARNING |
| "md: array %s already has disks!\n", |
| mdname(mddev)); |
| err = -EBUSY; |
| goto abort_unlock; |
| } |
| if (mddev->raid_disks) { |
| printk(KERN_WARNING |
| "md: array %s already initialised!\n", |
| mdname(mddev)); |
| err = -EBUSY; |
| goto abort_unlock; |
| } |
| err = set_array_info(mddev, &info); |
| if (err) { |
| printk(KERN_WARNING "md: couldn't set" |
| " array info. %d\n", err); |
| goto abort_unlock; |
| } |
| } |
| goto done_unlock; |
| |
| default:; |
| } |
| |
| /* |
| * Commands querying/configuring an existing array: |
| */ |
| /* if we are not initialised yet, only ADD_NEW_DISK, STOP_ARRAY, |
| * RUN_ARRAY, and SET_BITMAP_FILE are allowed */ |
| if (!mddev->raid_disks && cmd != ADD_NEW_DISK && cmd != STOP_ARRAY |
| && cmd != RUN_ARRAY && cmd != SET_BITMAP_FILE) { |
| err = -ENODEV; |
| goto abort_unlock; |
| } |
| |
| /* |
| * Commands even a read-only array can execute: |
| */ |
| switch (cmd) |
| { |
| case GET_ARRAY_INFO: |
| err = get_array_info(mddev, argp); |
| goto done_unlock; |
| |
| case GET_BITMAP_FILE: |
| err = get_bitmap_file(mddev, argp); |
| goto done_unlock; |
| |
| case GET_DISK_INFO: |
| err = get_disk_info(mddev, argp); |
| goto done_unlock; |
| |
| case RESTART_ARRAY_RW: |
| err = restart_array(mddev); |
| goto done_unlock; |
| |
| case STOP_ARRAY: |
| err = do_md_stop (mddev, 0); |
| goto done_unlock; |
| |
| case STOP_ARRAY_RO: |
| err = do_md_stop (mddev, 1); |
| goto done_unlock; |
| |
| /* |
| * We have a problem here : there is no easy way to give a CHS |
| * virtual geometry. We currently pretend that we have a 2 heads |
| * 4 sectors (with a BIG number of cylinders...). This drives |
| * dosfs just mad... ;-) |
| */ |
| case HDIO_GETGEO: |
| if (!loc) { |
| err = -EINVAL; |
| goto abort_unlock; |
| } |
| err = put_user (2, (char __user *) &loc->heads); |
| if (err) |
| goto abort_unlock; |
| err = put_user (4, (char __user *) &loc->sectors); |
| if (err) |
| goto abort_unlock; |
| err = put_user(get_capacity(mddev->gendisk)/8, |
| (short __user *) &loc->cylinders); |
| if (err) |
| goto abort_unlock; |
| err = put_user (get_start_sect(inode->i_bdev), |
| (long __user *) &loc->start); |
| goto done_unlock; |
| } |
| |
| /* |
| * The remaining ioctls are changing the state of the |
| * superblock, so we do not allow read-only arrays |
| * here: |
| */ |
| if (mddev->ro) { |
| err = -EROFS; |
| goto abort_unlock; |
| } |
| |
| switch (cmd) |
| { |
| case ADD_NEW_DISK: |
| { |
| mdu_disk_info_t info; |
| if (copy_from_user(&info, argp, sizeof(info))) |
| err = -EFAULT; |
| else |
| err = add_new_disk(mddev, &info); |
| goto done_unlock; |
| } |
| |
| case HOT_REMOVE_DISK: |
| err = hot_remove_disk(mddev, new_decode_dev(arg)); |
| goto done_unlock; |
| |
| case HOT_ADD_DISK: |
| err = hot_add_disk(mddev, new_decode_dev(arg)); |
| goto done_unlock; |
| |
| case SET_DISK_FAULTY: |
| err = set_disk_faulty(mddev, new_decode_dev(arg)); |
| goto done_unlock; |
| |
| case RUN_ARRAY: |
| err = do_md_run (mddev); |
| goto done_unlock; |
| |
| case SET_BITMAP_FILE: |
| err = set_bitmap_file(mddev, (int)arg); |
| goto done_unlock; |
| |
| default: |
| if (_IOC_TYPE(cmd) == MD_MAJOR) |
| printk(KERN_WARNING "md: %s(pid %d) used" |
| " obsolete MD ioctl, upgrade your" |
| " software to use new ictls.\n", |
| current->comm, current->pid); |
| err = -EINVAL; |
| goto abort_unlock; |
| } |
| |
| done_unlock: |
| abort_unlock: |
| mddev_unlock(mddev); |
| |
| return err; |
| done: |
| if (err) |
| MD_BUG(); |
| abort: |
| return err; |
| } |
| |
| static int md_open(struct inode *inode, struct file *file) |
| { |
| /* |
| * Succeed if we can lock the mddev, which confirms that |
| * it isn't being stopped right now. |
| */ |
| mddev_t *mddev = inode->i_bdev->bd_disk->private_data; |
| int err; |
| |
| if ((err = mddev_lock(mddev))) |
| goto out; |
| |
| err = 0; |
| mddev_get(mddev); |
| mddev_unlock(mddev); |
| |
| check_disk_change(inode->i_bdev); |
| out: |
| return err; |
| } |
| |
| static int md_release(struct inode *inode, struct file * file) |
| { |
| mddev_t *mddev = inode->i_bdev->bd_disk->private_data; |
| |
| if (!mddev) |
| BUG(); |
| mddev_put(mddev); |
| |
| return 0; |
| } |
| |
| static int md_media_changed(struct gendisk *disk) |
| { |
| mddev_t *mddev = disk->private_data; |
| |
| return mddev->changed; |
| } |
| |
| static int md_revalidate(struct gendisk *disk) |
| { |
| mddev_t *mddev = disk->private_data; |
| |
| mddev->changed = 0; |
| return 0; |
| } |
| static struct block_device_operations md_fops = |
| { |
| .owner = THIS_MODULE, |
| .open = md_open, |
| .release = md_release, |
| .ioctl = md_ioctl, |
| .media_changed = md_media_changed, |
| .revalidate_disk= md_revalidate, |
| }; |
| |
| static int md_thread(void * arg) |
| { |
| mdk_thread_t *thread = arg; |
| |
| /* |
| * md_thread is a 'system-thread', it's priority should be very |
| * high. We avoid resource deadlocks individually in each |
| * raid personality. (RAID5 does preallocation) We also use RR and |
| * the very same RT priority as kswapd, thus we will never get |
| * into a priority inversion deadlock. |
| * |
| * we definitely have to have equal or higher priority than |
| * bdflush, otherwise bdflush will deadlock if there are too |
| * many dirty RAID5 blocks. |
| */ |
| |
| allow_signal(SIGKILL); |
| complete(thread->event); |
| while (!kthread_should_stop()) { |
| void (*run)(mddev_t *); |
| |
| wait_event_interruptible_timeout(thread->wqueue, |
| test_bit(THREAD_WAKEUP, &thread->flags) |
| || kthread_should_stop(), |
| thread->timeout); |
| try_to_freeze(); |
| |
| clear_bit(THREAD_WAKEUP, &thread->flags); |
| |
| run = thread->run; |
| if (run) |
| run(thread->mddev); |
| } |
| |
| return 0; |
| } |
| |
| void md_wakeup_thread(mdk_thread_t *thread) |
| { |
| if (thread) { |
| dprintk("md: waking up MD thread %s.\n", thread->tsk->comm); |
| set_bit(THREAD_WAKEUP, &thread->flags); |
| wake_up(&thread->wqueue); |
| } |
| } |
| |
| mdk_thread_t *md_register_thread(void (*run) (mddev_t *), mddev_t *mddev, |
| const char *name) |
| { |
| mdk_thread_t *thread; |
| struct completion event; |
| |
| thread = kmalloc(sizeof(mdk_thread_t), GFP_KERNEL); |
| if (!thread) |
| return NULL; |
| |
| memset(thread, 0, sizeof(mdk_thread_t)); |
| init_waitqueue_head(&thread->wqueue); |
| |
| init_completion(&event); |
| thread->event = &event; |
| thread->run = run; |
| thread->mddev = mddev; |
| thread->name = name; |
| thread->timeout = MAX_SCHEDULE_TIMEOUT; |
| thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev)); |
| if (IS_ERR(thread->tsk)) { |
| kfree(thread); |
| return NULL; |
| } |
| wait_for_completion(&event); |
| return thread; |
| } |
| |
| void md_unregister_thread(mdk_thread_t *thread) |
| { |
| dprintk("interrupting MD-thread pid %d\n", thread->tsk->pid); |
| |
| kthread_stop(thread->tsk); |
| kfree(thread); |
| } |
| |
| void md_error(mddev_t *mddev, mdk_rdev_t *rdev) |
| { |
| if (!mddev) { |
| MD_BUG(); |
| return; |
| } |
| |
| if (!rdev || rdev->faulty) |
| return; |
| /* |
| dprintk("md_error dev:%s, rdev:(%d:%d), (caller: %p,%p,%p,%p).\n", |
| mdname(mddev), |
| MAJOR(rdev->bdev->bd_dev), MINOR(rdev->bdev->bd_dev), |
| __builtin_return_address(0),__builtin_return_address(1), |
| __builtin_return_address(2),__builtin_return_address(3)); |
| */ |
| if (!mddev->pers->error_handler) |
| return; |
| mddev->pers->error_handler(mddev,rdev); |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| } |
| |
| /* seq_file implementation /proc/mdstat */ |
| |
| static void status_unused(struct seq_file *seq) |
| { |
| int i = 0; |
| mdk_rdev_t *rdev; |
| struct list_head *tmp; |
| |
| seq_printf(seq, "unused devices: "); |
| |
| ITERATE_RDEV_PENDING(rdev,tmp) { |
| char b[BDEVNAME_SIZE]; |
| i++; |
| seq_printf(seq, "%s ", |
| bdevname(rdev->bdev,b)); |
| } |
| if (!i) |
| seq_printf(seq, "<none>"); |
| |
| seq_printf(seq, "\n"); |
| } |
| |
| |
| static void status_resync(struct seq_file *seq, mddev_t * mddev) |
| { |
| unsigned long max_blocks, resync, res, dt, db, rt; |
| |
| resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2; |
| |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) |
| max_blocks = mddev->resync_max_sectors >> 1; |
| else |
| max_blocks = mddev->size; |
| |
| /* |
| * Should not happen. |
| */ |
| if (!max_blocks) { |
| MD_BUG(); |
| return; |
| } |
| res = (resync/1024)*1000/(max_blocks/1024 + 1); |
| { |
| int i, x = res/50, y = 20-x; |
| seq_printf(seq, "["); |
| for (i = 0; i < x; i++) |
| seq_printf(seq, "="); |
| seq_printf(seq, ">"); |
| for (i = 0; i < y; i++) |
| seq_printf(seq, "."); |
| seq_printf(seq, "] "); |
| } |
| seq_printf(seq, " %s =%3lu.%lu%% (%lu/%lu)", |
| (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ? |
| "resync" : "recovery"), |
| res/10, res % 10, resync, max_blocks); |
| |
| /* |
| * We do not want to overflow, so the order of operands and |
| * the * 100 / 100 trick are important. We do a +1 to be |
| * safe against division by zero. We only estimate anyway. |
| * |
| * dt: time from mark until now |
| * db: blocks written from mark until now |
| * rt: remaining time |
| */ |
| dt = ((jiffies - mddev->resync_mark) / HZ); |
| if (!dt) dt++; |
| db = resync - (mddev->resync_mark_cnt/2); |
| rt = (dt * ((max_blocks-resync) / (db/100+1)))/100; |
| |
| seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6); |
| |
| seq_printf(seq, " speed=%ldK/sec", db/dt); |
| } |
| |
| static void *md_seq_start(struct seq_file *seq, loff_t *pos) |
| { |
| struct list_head *tmp; |
| loff_t l = *pos; |
| mddev_t *mddev; |
| |
| if (l >= 0x10000) |
| return NULL; |
| if (!l--) |
| /* header */ |
| return (void*)1; |
| |
| spin_lock(&all_mddevs_lock); |
| list_for_each(tmp,&all_mddevs) |
| if (!l--) { |
| mddev = list_entry(tmp, mddev_t, all_mddevs); |
| mddev_get(mddev); |
| spin_unlock(&all_mddevs_lock); |
| return mddev; |
| } |
| spin_unlock(&all_mddevs_lock); |
| if (!l--) |
| return (void*)2;/* tail */ |
| return NULL; |
| } |
| |
| static void *md_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| { |
| struct list_head *tmp; |
| mddev_t *next_mddev, *mddev = v; |
| |
| ++*pos; |
| if (v == (void*)2) |
| return NULL; |
| |
| spin_lock(&all_mddevs_lock); |
| if (v == (void*)1) |
| tmp = all_mddevs.next; |
| else |
| tmp = mddev->all_mddevs.next; |
| if (tmp != &all_mddevs) |
| next_mddev = mddev_get(list_entry(tmp,mddev_t,all_mddevs)); |
| else { |
| next_mddev = (void*)2; |
| *pos = 0x10000; |
| } |
| spin_unlock(&all_mddevs_lock); |
| |
| if (v != (void*)1) |
| mddev_put(mddev); |
| return next_mddev; |
| |
| } |
| |
| static void md_seq_stop(struct seq_file *seq, void *v) |
| { |
| mddev_t *mddev = v; |
| |
| if (mddev && v != (void*)1 && v != (void*)2) |
| mddev_put(mddev); |
| } |
| |
| static int md_seq_show(struct seq_file *seq, void *v) |
| { |
| mddev_t *mddev = v; |
| sector_t size; |
| struct list_head *tmp2; |
| mdk_rdev_t *rdev; |
| int i; |
| struct bitmap *bitmap; |
| |
| if (v == (void*)1) { |
| seq_printf(seq, "Personalities : "); |
| spin_lock(&pers_lock); |
| for (i = 0; i < MAX_PERSONALITY; i++) |
| if (pers[i]) |
| seq_printf(seq, "[%s] ", pers[i]->name); |
| |
| spin_unlock(&pers_lock); |
| seq_printf(seq, "\n"); |
| return 0; |
| } |
| if (v == (void*)2) { |
| status_unused(seq); |
| return 0; |
| } |
| |
| if (mddev_lock(mddev)!=0) |
| return -EINTR; |
| if (mddev->pers || mddev->raid_disks || !list_empty(&mddev->disks)) { |
| seq_printf(seq, "%s : %sactive", mdname(mddev), |
| mddev->pers ? "" : "in"); |
| if (mddev->pers) { |
| if (mddev->ro) |
| seq_printf(seq, " (read-only)"); |
| seq_printf(seq, " %s", mddev->pers->name); |
| } |
| |
| size = 0; |
| ITERATE_RDEV(mddev,rdev,tmp2) { |
| char b[BDEVNAME_SIZE]; |
| seq_printf(seq, " %s[%d]", |
| bdevname(rdev->bdev,b), rdev->desc_nr); |
| if (test_bit(WriteMostly, &rdev->flags)) |
| seq_printf(seq, "(W)"); |
| if (rdev->faulty) { |
| seq_printf(seq, "(F)"); |
| continue; |
| } else if (rdev->raid_disk < 0) |
| seq_printf(seq, "(S)"); /* spare */ |
| size += rdev->size; |
| } |
| |
| if (!list_empty(&mddev->disks)) { |
| if (mddev->pers) |
| seq_printf(seq, "\n %llu blocks", |
| (unsigned long long)mddev->array_size); |
| else |
| seq_printf(seq, "\n %llu blocks", |
| (unsigned long long)size); |
| } |
| if (mddev->persistent) { |
| if (mddev->major_version != 0 || |
| mddev->minor_version != 90) { |
| seq_printf(seq," super %d.%d", |
| mddev->major_version, |
| mddev->minor_version); |
| } |
| } else |
| seq_printf(seq, " super non-persistent"); |
| |
| if (mddev->pers) { |
| mddev->pers->status (seq, mddev); |
| seq_printf(seq, "\n "); |
| if (mddev->curr_resync > 2) { |
| status_resync (seq, mddev); |
| seq_printf(seq, "\n "); |
| } else if (mddev->curr_resync == 1 || mddev->curr_resync == 2) |
| seq_printf(seq, " resync=DELAYED\n "); |
| } else |
| seq_printf(seq, "\n "); |
| |
| if ((bitmap = mddev->bitmap)) { |
| unsigned long chunk_kb; |
| unsigned long flags; |
| spin_lock_irqsave(&bitmap->lock, flags); |
| chunk_kb = bitmap->chunksize >> 10; |
| seq_printf(seq, "bitmap: %lu/%lu pages [%luKB], " |
| "%lu%s chunk", |
| bitmap->pages - bitmap->missing_pages, |
| bitmap->pages, |
| (bitmap->pages - bitmap->missing_pages) |
| << (PAGE_SHIFT - 10), |
| chunk_kb ? chunk_kb : bitmap->chunksize, |
| chunk_kb ? "KB" : "B"); |
| if (bitmap->file) { |
| seq_printf(seq, ", file: "); |
| seq_path(seq, bitmap->file->f_vfsmnt, |
| bitmap->file->f_dentry," \t\n"); |
| } |
| |
| seq_printf(seq, "\n"); |
| spin_unlock_irqrestore(&bitmap->lock, flags); |
| } |
| |
| seq_printf(seq, "\n"); |
| } |
| mddev_unlock(mddev); |
| |
| return 0; |
| } |
| |
| static struct seq_operations md_seq_ops = { |
| .start = md_seq_start, |
| .next = md_seq_next, |
| .stop = md_seq_stop, |
| .show = md_seq_show, |
| }; |
| |
| static int md_seq_open(struct inode *inode, struct file *file) |
| { |
| int error; |
| |
| error = seq_open(file, &md_seq_ops); |
| return error; |
| } |
| |
| static struct file_operations md_seq_fops = { |
| .open = md_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release, |
| }; |
| |
| int register_md_personality(int pnum, mdk_personality_t *p) |
| { |
| if (pnum >= MAX_PERSONALITY) { |
| printk(KERN_ERR |
| "md: tried to install personality %s as nr %d, but max is %lu\n", |
| p->name, pnum, MAX_PERSONALITY-1); |
| return -EINVAL; |
| } |
| |
| spin_lock(&pers_lock); |
| if (pers[pnum]) { |
| spin_unlock(&pers_lock); |
| return -EBUSY; |
| } |
| |
| pers[pnum] = p; |
| printk(KERN_INFO "md: %s personality registered as nr %d\n", p->name, pnum); |
| spin_unlock(&pers_lock); |
| return 0; |
| } |
| |
| int unregister_md_personality(int pnum) |
| { |
| if (pnum >= MAX_PERSONALITY) |
| return -EINVAL; |
| |
| printk(KERN_INFO "md: %s personality unregistered\n", pers[pnum]->name); |
| spin_lock(&pers_lock); |
| pers[pnum] = NULL; |
| spin_unlock(&pers_lock); |
| return 0; |
| } |
| |
| static int is_mddev_idle(mddev_t *mddev) |
| { |
| mdk_rdev_t * rdev; |
| struct list_head *tmp; |
| int idle; |
| unsigned long curr_events; |
| |
| idle = 1; |
| ITERATE_RDEV(mddev,rdev,tmp) { |
| struct gendisk *disk = rdev->bdev->bd_contains->bd_disk; |
| curr_events = disk_stat_read(disk, read_sectors) + |
| disk_stat_read(disk, write_sectors) - |
| atomic_read(&disk->sync_io); |
| /* Allow some slack between valud of curr_events and last_events, |
| * as there are some uninteresting races. |
| * Note: the following is an unsigned comparison. |
| */ |
| if ((curr_events - rdev->last_events + 32) > 64) { |
| rdev->last_events = curr_events; |
| idle = 0; |
| } |
| } |
| return idle; |
| } |
| |
| void md_done_sync(mddev_t *mddev, int blocks, int ok) |
| { |
| /* another "blocks" (512byte) blocks have been synced */ |
| atomic_sub(blocks, &mddev->recovery_active); |
| wake_up(&mddev->recovery_wait); |
| if (!ok) { |
| set_bit(MD_RECOVERY_ERR, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| // stop recovery, signal do_sync .... |
| } |
| } |
| |
| |
| /* md_write_start(mddev, bi) |
| * If we need to update some array metadata (e.g. 'active' flag |
| * in superblock) before writing, schedule a superblock update |
| * and wait for it to complete. |
| */ |
| void md_write_start(mddev_t *mddev, struct bio *bi) |
| { |
| if (bio_data_dir(bi) != WRITE) |
| return; |
| |
| atomic_inc(&mddev->writes_pending); |
| if (mddev->in_sync) { |
| spin_lock(&mddev->write_lock); |
| if (mddev->in_sync) { |
| mddev->in_sync = 0; |
| mddev->sb_dirty = 1; |
| md_wakeup_thread(mddev->thread); |
| } |
| spin_unlock(&mddev->write_lock); |
| } |
| wait_event(mddev->sb_wait, mddev->sb_dirty==0); |
| } |
| |
| void md_write_end(mddev_t *mddev) |
| { |
| if (atomic_dec_and_test(&mddev->writes_pending)) { |
| if (mddev->safemode == 2) |
| md_wakeup_thread(mddev->thread); |
| else |
| mod_timer(&mddev->safemode_timer, jiffies + mddev->safemode_delay); |
| } |
| } |
| |
| static DECLARE_WAIT_QUEUE_HEAD(resync_wait); |
| |
| #define SYNC_MARKS 10 |
| #define SYNC_MARK_STEP (3*HZ) |
| static void md_do_sync(mddev_t *mddev) |
| { |
| mddev_t *mddev2; |
| unsigned int currspeed = 0, |
| window; |
| sector_t max_sectors,j, io_sectors; |
| unsigned long mark[SYNC_MARKS]; |
| sector_t mark_cnt[SYNC_MARKS]; |
| int last_mark,m; |
| struct list_head *tmp; |
| sector_t last_check; |
| int skipped = 0; |
| |
| /* just incase thread restarts... */ |
| if (test_bit(MD_RECOVERY_DONE, &mddev->recovery)) |
| return; |
| |
| /* we overload curr_resync somewhat here. |
| * 0 == not engaged in resync at all |
| * 2 == checking that there is no conflict with another sync |
| * 1 == like 2, but have yielded to allow conflicting resync to |
| * commense |
| * other == active in resync - this many blocks |
| * |
| * Before starting a resync we must have set curr_resync to |
| * 2, and then checked that every "conflicting" array has curr_resync |
| * less than ours. When we find one that is the same or higher |
| * we wait on resync_wait. To avoid deadlock, we reduce curr_resync |
| * to 1 if we choose to yield (based arbitrarily on address of mddev structure). |
| * This will mean we have to start checking from the beginning again. |
| * |
| */ |
| |
| do { |
| mddev->curr_resync = 2; |
| |
| try_again: |
| if (signal_pending(current) || |
| kthread_should_stop()) { |
| flush_signals(current); |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| goto skip; |
| } |
| ITERATE_MDDEV(mddev2,tmp) { |
| if (mddev2 == mddev) |
| continue; |
| if (mddev2->curr_resync && |
| match_mddev_units(mddev,mddev2)) { |
| DEFINE_WAIT(wq); |
| if (mddev < mddev2 && mddev->curr_resync == 2) { |
| /* arbitrarily yield */ |
| mddev->curr_resync = 1; |
| wake_up(&resync_wait); |
| } |
| if (mddev > mddev2 && mddev->curr_resync == 1) |
| /* no need to wait here, we can wait the next |
| * time 'round when curr_resync == 2 |
| */ |
| continue; |
| prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); |
| if (!signal_pending(current) && |
| !kthread_should_stop() && |
| mddev2->curr_resync >= mddev->curr_resync) { |
| printk(KERN_INFO "md: delaying resync of %s" |
| " until %s has finished resync (they" |
| " share one or more physical units)\n", |
| mdname(mddev), mdname(mddev2)); |
| mddev_put(mddev2); |
| schedule(); |
| finish_wait(&resync_wait, &wq); |
| goto try_again; |
| } |
| finish_wait(&resync_wait, &wq); |
| } |
| } |
| } while (mddev->curr_resync < 2); |
| |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) |
| /* resync follows the size requested by the personality, |
| * which defaults to physical size, but can be virtual size |
| */ |
| max_sectors = mddev->resync_max_sectors; |
| else |
| /* recovery follows the physical size of devices */ |
| max_sectors = mddev->size << 1; |
| |
| printk(KERN_INFO "md: syncing RAID array %s\n", mdname(mddev)); |
| printk(KERN_INFO "md: minimum _guaranteed_ reconstruction speed:" |
| " %d KB/sec/disc.\n", sysctl_speed_limit_min); |
| printk(KERN_INFO "md: using maximum available idle IO bandwidth " |
| "(but not more than %d KB/sec) for reconstruction.\n", |
| sysctl_speed_limit_max); |
| |
| is_mddev_idle(mddev); /* this also initializes IO event counters */ |
| /* we don't use the checkpoint if there's a bitmap */ |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && !mddev->bitmap) |
| j = mddev->recovery_cp; |
| else |
| j = 0; |
| io_sectors = 0; |
| for (m = 0; m < SYNC_MARKS; m++) { |
| mark[m] = jiffies; |
| mark_cnt[m] = io_sectors; |
| } |
| last_mark = 0; |
| mddev->resync_mark = mark[last_mark]; |
| mddev->resync_mark_cnt = mark_cnt[last_mark]; |
| |
| /* |
| * Tune reconstruction: |
| */ |
| window = 32*(PAGE_SIZE/512); |
| printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n", |
| window/2,(unsigned long long) max_sectors/2); |
| |
| atomic_set(&mddev->recovery_active, 0); |
| init_waitqueue_head(&mddev->recovery_wait); |
| last_check = 0; |
| |
| if (j>2) { |
| printk(KERN_INFO |
| "md: resuming recovery of %s from checkpoint.\n", |
| mdname(mddev)); |
| mddev->curr_resync = j; |
| } |
| |
| while (j < max_sectors) { |
| sector_t sectors; |
| |
| skipped = 0; |
| sectors = mddev->pers->sync_request(mddev, j, &skipped, |
| currspeed < sysctl_speed_limit_min); |
| if (sectors == 0) { |
| set_bit(MD_RECOVERY_ERR, &mddev->recovery); |
| goto out; |
| } |
| |
| if (!skipped) { /* actual IO requested */ |
| io_sectors += sectors; |
| atomic_add(sectors, &mddev->recovery_active); |
| } |
| |
| j += sectors; |
| if (j>1) mddev->curr_resync = j; |
| |
| |
| if (last_check + window > io_sectors || j == max_sectors) |
| continue; |
| |
| last_check = io_sectors; |
| |
| if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) || |
| test_bit(MD_RECOVERY_ERR, &mddev->recovery)) |
| break; |
| |
| repeat: |
| if (time_after_eq(jiffies, mark[last_mark] + SYNC_MARK_STEP )) { |
| /* step marks */ |
| int next = (last_mark+1) % SYNC_MARKS; |
| |
| mddev->resync_mark = mark[next]; |
| mddev->resync_mark_cnt = mark_cnt[next]; |
| mark[next] = jiffies; |
| mark_cnt[next] = io_sectors - atomic_read(&mddev->recovery_active); |
| last_mark = next; |
| } |
| |
| |
| if (signal_pending(current) || kthread_should_stop()) { |
| /* |
| * got a signal, exit. |
| */ |
| printk(KERN_INFO |
| "md: md_do_sync() got signal ... exiting\n"); |
| flush_signals(current); |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| goto out; |
| } |
| |
| /* |
| * this loop exits only if either when we are slower than |
| * the 'hard' speed limit, or the system was IO-idle for |
| * a jiffy. |
| * the system might be non-idle CPU-wise, but we only care |
| * about not overloading the IO subsystem. (things like an |
| * e2fsck being done on the RAID array should execute fast) |
| */ |
| mddev->queue->unplug_fn(mddev->queue); |
| cond_resched(); |
| |
| currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2 |
| /((jiffies-mddev->resync_mark)/HZ +1) +1; |
| |
| if (currspeed > sysctl_speed_limit_min) { |
| if ((currspeed > sysctl_speed_limit_max) || |
| !is_mddev_idle(mddev)) { |
| msleep_interruptible(250); |
| goto repeat; |
| } |
| } |
| } |
| printk(KERN_INFO "md: %s: sync done.\n",mdname(mddev)); |
| /* |
| * this also signals 'finished resyncing' to md_stop |
| */ |
| out: |
| mddev->queue->unplug_fn(mddev->queue); |
| |
| wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active)); |
| |
| /* tell personality that we are finished */ |
| mddev->pers->sync_request(mddev, max_sectors, &skipped, 1); |
| |
| if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && |
| mddev->curr_resync > 2 && |
| mddev->curr_resync >= mddev->recovery_cp) { |
| if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { |
| printk(KERN_INFO |
| "md: checkpointing recovery of %s.\n", |
| mdname(mddev)); |
| mddev->recovery_cp = mddev->curr_resync; |
| } else |
| mddev->recovery_cp = MaxSector; |
| } |
| |
| skip: |
| mddev->curr_resync = 0; |
| wake_up(&resync_wait); |
| set_bit(MD_RECOVERY_DONE, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| } |
| |
| |
| /* |
| * This routine is regularly called by all per-raid-array threads to |
| * deal with generic issues like resync and super-block update. |
| * Raid personalities that don't have a thread (linear/raid0) do not |
| * need this as they never do any recovery or update the superblock. |
| * |
| * It does not do any resync itself, but rather "forks" off other threads |
| * to do that as needed. |
| * When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in |
| * "->recovery" and create a thread at ->sync_thread. |
| * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR) |
| * and wakeups up this thread which will reap the thread and finish up. |
| * This thread also removes any faulty devices (with nr_pending == 0). |
| * |
| * The overall approach is: |
| * 1/ if the superblock needs updating, update it. |
| * 2/ If a recovery thread is running, don't do anything else. |
| * 3/ If recovery has finished, clean up, possibly marking spares active. |
| * 4/ If there are any faulty devices, remove them. |
| * 5/ If array is degraded, try to add spares devices |
| * 6/ If array has spares or is not in-sync, start a resync thread. |
| */ |
| void md_check_recovery(mddev_t *mddev) |
| { |
| mdk_rdev_t *rdev; |
| struct list_head *rtmp; |
| |
| |
| if (mddev->bitmap) |
| bitmap_daemon_work(mddev->bitmap); |
| |
| if (mddev->ro) |
| return; |
| |
| if (signal_pending(current)) { |
| if (mddev->pers->sync_request) { |
| printk(KERN_INFO "md: %s in immediate safe mode\n", |
| mdname(mddev)); |
| mddev->safemode = 2; |
| } |
| flush_signals(current); |
| } |
| |
| if ( ! ( |
| mddev->sb_dirty || |
| test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || |
| test_bit(MD_RECOVERY_DONE, &mddev->recovery) || |
| (mddev->safemode == 1) || |
| (mddev->safemode == 2 && ! atomic_read(&mddev->writes_pending) |
| && !mddev->in_sync && mddev->recovery_cp == MaxSector) |
| )) |
| return; |
| |
| if (mddev_trylock(mddev)==0) { |
| int spares =0; |
| |
| spin_lock(&mddev->write_lock); |
| if (mddev->safemode && !atomic_read(&mddev->writes_pending) && |
| !mddev->in_sync && mddev->recovery_cp == MaxSector) { |
| mddev->in_sync = 1; |
| mddev->sb_dirty = 1; |
| } |
| if (mddev->safemode == 1) |
| mddev->safemode = 0; |
| spin_unlock(&mddev->write_lock); |
| |
| if (mddev->sb_dirty) |
| md_update_sb(mddev); |
| |
| |
| if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) && |
| !test_bit(MD_RECOVERY_DONE, &mddev->recovery)) { |
| /* resync/recovery still happening */ |
| clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| goto unlock; |
| } |
| if (mddev->sync_thread) { |
| /* resync has finished, collect result */ |
| md_unregister_thread(mddev->sync_thread); |
| mddev->sync_thread = NULL; |
| if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && |
| !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { |
| /* success...*/ |
| /* activate any spares */ |
| mddev->pers->spare_active(mddev); |
| } |
| md_update_sb(mddev); |
| |
| /* if array is no-longer degraded, then any saved_raid_disk |
| * information must be scrapped |
| */ |
| if (!mddev->degraded) |
| ITERATE_RDEV(mddev,rdev,rtmp) |
| rdev->saved_raid_disk = -1; |
| |
| mddev->recovery = 0; |
| /* flag recovery needed just to double check */ |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| goto unlock; |
| } |
| if (mddev->recovery) |
| /* probably just the RECOVERY_NEEDED flag */ |
| mddev->recovery = 0; |
| |
| /* no recovery is running. |
| * remove any failed drives, then |
| * add spares if possible. |
| * Spare are also removed and re-added, to allow |
| * the personality to fail the re-add. |
| */ |
| ITERATE_RDEV(mddev,rdev,rtmp) |
| if (rdev->raid_disk >= 0 && |
| (rdev->faulty || ! rdev->in_sync) && |
| atomic_read(&rdev->nr_pending)==0) { |
| if (mddev->pers->hot_remove_disk(mddev, rdev->raid_disk)==0) |
| rdev->raid_disk = -1; |
| } |
| |
| if (mddev->degraded) { |
| ITERATE_RDEV(mddev,rdev,rtmp) |
| if (rdev->raid_disk < 0 |
| && !rdev->faulty) { |
| if (mddev->pers->hot_add_disk(mddev,rdev)) |
| spares++; |
| else |
| break; |
| } |
| } |
| |
| if (!spares && (mddev->recovery_cp == MaxSector )) { |
| /* nothing we can do ... */ |
| goto unlock; |
| } |
| if (mddev->pers->sync_request) { |
| set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); |
| if (!spares) |
| set_bit(MD_RECOVERY_SYNC, &mddev->recovery); |
| if (spares && mddev->bitmap && ! mddev->bitmap->file) { |
| /* We are adding a device or devices to an array |
| * which has the bitmap stored on all devices. |
| * So make sure all bitmap pages get written |
| */ |
| bitmap_write_all(mddev->bitmap); |
| } |
| mddev->sync_thread = md_register_thread(md_do_sync, |
| mddev, |
| "%s_resync"); |
| if (!mddev->sync_thread) { |
| printk(KERN_ERR "%s: could not start resync" |
| " thread...\n", |
| mdname(mddev)); |
| /* leave the spares where they are, it shouldn't hurt */ |
| mddev->recovery = 0; |
| } else { |
| md_wakeup_thread(mddev->sync_thread); |
| } |
| } |
| unlock: |
| mddev_unlock(mddev); |
| } |
| } |
| |
| static int md_notify_reboot(struct notifier_block *this, |
| unsigned long code, void *x) |
| { |
| struct list_head *tmp; |
| mddev_t *mddev; |
| |
| if ((code == SYS_DOWN) || (code == SYS_HALT) || (code == SYS_POWER_OFF)) { |
| |
| printk(KERN_INFO "md: stopping all md devices.\n"); |
| |
| ITERATE_MDDEV(mddev,tmp) |
| if (mddev_trylock(mddev)==0) |
| do_md_stop (mddev, 1); |
| /* |
| * certain more exotic SCSI devices are known to be |
| * volatile wrt too early system reboots. While the |
| * right place to handle this issue is the given |
| * driver, we do want to have a safe RAID driver ... |
| */ |
| mdelay(1000*1); |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block md_notifier = { |
| .notifier_call = md_notify_reboot, |
| .next = NULL, |
| .priority = INT_MAX, /* before any real devices */ |
| }; |
| |
| static void md_geninit(void) |
| { |
| struct proc_dir_entry *p; |
| |
| dprintk("md: sizeof(mdp_super_t) = %d\n", (int)sizeof(mdp_super_t)); |
| |
| p = create_proc_entry("mdstat", S_IRUGO, NULL); |
| if (p) |
| p->proc_fops = &md_seq_fops; |
| } |
| |
| static int __init md_init(void) |
| { |
| int minor; |
| |
| printk(KERN_INFO "md: md driver %d.%d.%d MAX_MD_DEVS=%d," |
| " MD_SB_DISKS=%d\n", |
| MD_MAJOR_VERSION, MD_MINOR_VERSION, |
| MD_PATCHLEVEL_VERSION, MAX_MD_DEVS, MD_SB_DISKS); |
| printk(KERN_INFO "md: bitmap version %d.%d\n", BITMAP_MAJOR, |
| BITMAP_MINOR); |
| |
| if (register_blkdev(MAJOR_NR, "md")) |
| return -1; |
| if ((mdp_major=register_blkdev(0, "mdp"))<=0) { |
| unregister_blkdev(MAJOR_NR, "md"); |
| return -1; |
| } |
| devfs_mk_dir("md"); |
| blk_register_region(MKDEV(MAJOR_NR, 0), MAX_MD_DEVS, THIS_MODULE, |
| md_probe, NULL, NULL); |
| blk_register_region(MKDEV(mdp_major, 0), MAX_MD_DEVS<<MdpMinorShift, THIS_MODULE, |
| md_probe, NULL, NULL); |
| |
| for (minor=0; minor < MAX_MD_DEVS; ++minor) |
| devfs_mk_bdev(MKDEV(MAJOR_NR, minor), |
| S_IFBLK|S_IRUSR|S_IWUSR, |
| "md/%d", minor); |
| |
| for (minor=0; minor < MAX_MD_DEVS; ++minor) |
| devfs_mk_bdev(MKDEV(mdp_major, minor<<MdpMinorShift), |
| S_IFBLK|S_IRUSR|S_IWUSR, |
| "md/mdp%d", minor); |
| |
| |
| register_reboot_notifier(&md_notifier); |
| raid_table_header = register_sysctl_table(raid_root_table, 1); |
| |
| md_geninit(); |
| return (0); |
| } |
| |
| |
| #ifndef MODULE |
| |
| /* |
| * Searches all registered partitions for autorun RAID arrays |
| * at boot time. |
| */ |
| static dev_t detected_devices[128]; |
| static int dev_cnt; |
| |
| void md_autodetect_dev(dev_t dev) |
| { |
| if (dev_cnt >= 0 && dev_cnt < 127) |
| detected_devices[dev_cnt++] = dev; |
| } |
| |
| |
| static void autostart_arrays(int part) |
| { |
| mdk_rdev_t *rdev; |
| int i; |
| |
| printk(KERN_INFO "md: Autodetecting RAID arrays.\n"); |
| |
| for (i = 0; i < dev_cnt; i++) { |
| dev_t dev = detected_devices[i]; |
| |
| rdev = md_import_device(dev,0, 0); |
| if (IS_ERR(rdev)) |
| continue; |
| |
| if (rdev->faulty) { |
| MD_BUG(); |
| continue; |
| } |
| list_add(&rdev->same_set, &pending_raid_disks); |
| } |
| dev_cnt = 0; |
| |
| autorun_devices(part); |
| } |
| |
| #endif |
| |
| static __exit void md_exit(void) |
| { |
| mddev_t *mddev; |
| struct list_head *tmp; |
| int i; |
| blk_unregister_region(MKDEV(MAJOR_NR,0), MAX_MD_DEVS); |
| blk_unregister_region(MKDEV(mdp_major,0), MAX_MD_DEVS << MdpMinorShift); |
| for (i=0; i < MAX_MD_DEVS; i++) |
| devfs_remove("md/%d", i); |
| for (i=0; i < MAX_MD_DEVS; i++) |
| devfs_remove("md/d%d", i); |
| |
| devfs_remove("md"); |
| |
| unregister_blkdev(MAJOR_NR,"md"); |
| unregister_blkdev(mdp_major, "mdp"); |
| unregister_reboot_notifier(&md_notifier); |
| unregister_sysctl_table(raid_table_header); |
| remove_proc_entry("mdstat", NULL); |
| ITERATE_MDDEV(mddev,tmp) { |
| struct gendisk *disk = mddev->gendisk; |
| if (!disk) |
| continue; |
| export_array(mddev); |
| del_gendisk(disk); |
| put_disk(disk); |
| mddev->gendisk = NULL; |
| mddev_put(mddev); |
| } |
| } |
| |
| module_init(md_init) |
| module_exit(md_exit) |
| |
| EXPORT_SYMBOL(register_md_personality); |
| EXPORT_SYMBOL(unregister_md_personality); |
| EXPORT_SYMBOL(md_error); |
| EXPORT_SYMBOL(md_done_sync); |
| EXPORT_SYMBOL(md_write_start); |
| EXPORT_SYMBOL(md_write_end); |
| EXPORT_SYMBOL(md_register_thread); |
| EXPORT_SYMBOL(md_unregister_thread); |
| EXPORT_SYMBOL(md_wakeup_thread); |
| EXPORT_SYMBOL(md_print_devices); |
| EXPORT_SYMBOL(md_check_recovery); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("md"); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(MD_MAJOR); |