| /****************************************************************************** |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| #include <linux/etherdevice.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-io.h" |
| #include "iwl-helpers.h" |
| #include "iwl-4965-hw.h" |
| #include "iwl-4965.h" |
| #include "iwl-sta.h" |
| |
| void iwl4965_check_abort_status(struct iwl_priv *priv, |
| u8 frame_count, u32 status) |
| { |
| if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { |
| IWL_ERR(priv, "Tx flush command to flush out all frames\n"); |
| if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| queue_work(priv->workqueue, &priv->tx_flush); |
| } |
| } |
| |
| /* |
| * EEPROM |
| */ |
| struct iwl_mod_params iwl4965_mod_params = { |
| .amsdu_size_8K = 1, |
| .restart_fw = 1, |
| /* the rest are 0 by default */ |
| }; |
| |
| void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| unsigned long flags; |
| int i; |
| spin_lock_irqsave(&rxq->lock, flags); |
| INIT_LIST_HEAD(&rxq->rx_free); |
| INIT_LIST_HEAD(&rxq->rx_used); |
| /* Fill the rx_used queue with _all_ of the Rx buffers */ |
| for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { |
| /* In the reset function, these buffers may have been allocated |
| * to an SKB, so we need to unmap and free potential storage */ |
| if (rxq->pool[i].page != NULL) { |
| pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, |
| PAGE_SIZE << priv->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| __iwl_legacy_free_pages(priv, rxq->pool[i].page); |
| rxq->pool[i].page = NULL; |
| } |
| list_add_tail(&rxq->pool[i].list, &rxq->rx_used); |
| } |
| |
| for (i = 0; i < RX_QUEUE_SIZE; i++) |
| rxq->queue[i] = NULL; |
| |
| /* Set us so that we have processed and used all buffers, but have |
| * not restocked the Rx queue with fresh buffers */ |
| rxq->read = rxq->write = 0; |
| rxq->write_actual = 0; |
| rxq->free_count = 0; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| |
| int iwl4965_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| u32 rb_size; |
| const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ |
| u32 rb_timeout = 0; |
| |
| if (priv->cfg->mod_params->amsdu_size_8K) |
| rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; |
| else |
| rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; |
| |
| /* Stop Rx DMA */ |
| iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| |
| /* Reset driver's Rx queue write index */ |
| iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); |
| |
| /* Tell device where to find RBD circular buffer in DRAM */ |
| iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, |
| (u32)(rxq->bd_dma >> 8)); |
| |
| /* Tell device where in DRAM to update its Rx status */ |
| iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, |
| rxq->rb_stts_dma >> 4); |
| |
| /* Enable Rx DMA |
| * Direct rx interrupts to hosts |
| * Rx buffer size 4 or 8k |
| * RB timeout 0x10 |
| * 256 RBDs |
| */ |
| iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, |
| FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | |
| FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | |
| FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | |
| rb_size| |
| (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| |
| (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); |
| |
| /* Set interrupt coalescing timer to default (2048 usecs) */ |
| iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); |
| |
| return 0; |
| } |
| |
| static void iwl4965_set_pwr_vmain(struct iwl_priv *priv) |
| { |
| /* |
| * (for documentation purposes) |
| * to set power to V_AUX, do: |
| |
| if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) |
| iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VAUX, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| */ |
| |
| iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| } |
| |
| int iwl4965_hw_nic_init(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| int ret; |
| |
| /* nic_init */ |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->cfg->ops->lib->apm_ops.init(priv); |
| |
| /* Set interrupt coalescing calibration timer to default (512 usecs) */ |
| iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| iwl4965_set_pwr_vmain(priv); |
| |
| priv->cfg->ops->lib->apm_ops.config(priv); |
| |
| /* Allocate the RX queue, or reset if it is already allocated */ |
| if (!rxq->bd) { |
| ret = iwl_legacy_rx_queue_alloc(priv); |
| if (ret) { |
| IWL_ERR(priv, "Unable to initialize Rx queue\n"); |
| return -ENOMEM; |
| } |
| } else |
| iwl4965_rx_queue_reset(priv, rxq); |
| |
| iwl4965_rx_replenish(priv); |
| |
| iwl4965_rx_init(priv, rxq); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| rxq->need_update = 1; |
| iwl_legacy_rx_queue_update_write_ptr(priv, rxq); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Allocate or reset and init all Tx and Command queues */ |
| if (!priv->txq) { |
| ret = iwl4965_txq_ctx_alloc(priv); |
| if (ret) |
| return ret; |
| } else |
| iwl4965_txq_ctx_reset(priv); |
| |
| set_bit(STATUS_INIT, &priv->status); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr |
| */ |
| static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv, |
| dma_addr_t dma_addr) |
| { |
| return cpu_to_le32((u32)(dma_addr >> 8)); |
| } |
| |
| /** |
| * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool |
| * |
| * If there are slots in the RX queue that need to be restocked, |
| * and we have free pre-allocated buffers, fill the ranks as much |
| * as we can, pulling from rx_free. |
| * |
| * This moves the 'write' index forward to catch up with 'processed', and |
| * also updates the memory address in the firmware to reference the new |
| * target buffer. |
| */ |
| void iwl4965_rx_queue_restock(struct iwl_priv *priv) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct list_head *element; |
| struct iwl_rx_mem_buffer *rxb; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| while ((iwl_legacy_rx_queue_space(rxq) > 0) && (rxq->free_count)) { |
| /* The overwritten rxb must be a used one */ |
| rxb = rxq->queue[rxq->write]; |
| BUG_ON(rxb && rxb->page); |
| |
| /* Get next free Rx buffer, remove from free list */ |
| element = rxq->rx_free.next; |
| rxb = list_entry(element, struct iwl_rx_mem_buffer, list); |
| list_del(element); |
| |
| /* Point to Rx buffer via next RBD in circular buffer */ |
| rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, |
| rxb->page_dma); |
| rxq->queue[rxq->write] = rxb; |
| rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; |
| rxq->free_count--; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| /* If the pre-allocated buffer pool is dropping low, schedule to |
| * refill it */ |
| if (rxq->free_count <= RX_LOW_WATERMARK) |
| queue_work(priv->workqueue, &priv->rx_replenish); |
| |
| |
| /* If we've added more space for the firmware to place data, tell it. |
| * Increment device's write pointer in multiples of 8. */ |
| if (rxq->write_actual != (rxq->write & ~0x7)) { |
| spin_lock_irqsave(&rxq->lock, flags); |
| rxq->need_update = 1; |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| iwl_legacy_rx_queue_update_write_ptr(priv, rxq); |
| } |
| } |
| |
| /** |
| * iwl4965_rx_replenish - Move all used packet from rx_used to rx_free |
| * |
| * When moving to rx_free an SKB is allocated for the slot. |
| * |
| * Also restock the Rx queue via iwl_rx_queue_restock. |
| * This is called as a scheduled work item (except for during initialization) |
| */ |
| static void iwl4965_rx_allocate(struct iwl_priv *priv, gfp_t priority) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct list_head *element; |
| struct iwl_rx_mem_buffer *rxb; |
| struct page *page; |
| unsigned long flags; |
| gfp_t gfp_mask = priority; |
| |
| while (1) { |
| spin_lock_irqsave(&rxq->lock, flags); |
| if (list_empty(&rxq->rx_used)) { |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| return; |
| } |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| |
| if (rxq->free_count > RX_LOW_WATERMARK) |
| gfp_mask |= __GFP_NOWARN; |
| |
| if (priv->hw_params.rx_page_order > 0) |
| gfp_mask |= __GFP_COMP; |
| |
| /* Alloc a new receive buffer */ |
| page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); |
| if (!page) { |
| if (net_ratelimit()) |
| IWL_DEBUG_INFO(priv, "alloc_pages failed, " |
| "order: %d\n", |
| priv->hw_params.rx_page_order); |
| |
| if ((rxq->free_count <= RX_LOW_WATERMARK) && |
| net_ratelimit()) |
| IWL_CRIT(priv, |
| "Failed to alloc_pages with %s. " |
| "Only %u free buffers remaining.\n", |
| priority == GFP_ATOMIC ? |
| "GFP_ATOMIC" : "GFP_KERNEL", |
| rxq->free_count); |
| /* We don't reschedule replenish work here -- we will |
| * call the restock method and if it still needs |
| * more buffers it will schedule replenish */ |
| return; |
| } |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| |
| if (list_empty(&rxq->rx_used)) { |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| __free_pages(page, priv->hw_params.rx_page_order); |
| return; |
| } |
| element = rxq->rx_used.next; |
| rxb = list_entry(element, struct iwl_rx_mem_buffer, list); |
| list_del(element); |
| |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| |
| BUG_ON(rxb->page); |
| rxb->page = page; |
| /* Get physical address of the RB */ |
| rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, |
| PAGE_SIZE << priv->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| /* dma address must be no more than 36 bits */ |
| BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); |
| /* and also 256 byte aligned! */ |
| BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); |
| |
| spin_lock_irqsave(&rxq->lock, flags); |
| |
| list_add_tail(&rxb->list, &rxq->rx_free); |
| rxq->free_count++; |
| priv->alloc_rxb_page++; |
| |
| spin_unlock_irqrestore(&rxq->lock, flags); |
| } |
| } |
| |
| void iwl4965_rx_replenish(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| |
| iwl4965_rx_allocate(priv, GFP_KERNEL); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl4965_rx_queue_restock(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| void iwl4965_rx_replenish_now(struct iwl_priv *priv) |
| { |
| iwl4965_rx_allocate(priv, GFP_ATOMIC); |
| |
| iwl4965_rx_queue_restock(priv); |
| } |
| |
| /* Assumes that the skb field of the buffers in 'pool' is kept accurate. |
| * If an SKB has been detached, the POOL needs to have its SKB set to NULL |
| * This free routine walks the list of POOL entries and if SKB is set to |
| * non NULL it is unmapped and freed |
| */ |
| void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) |
| { |
| int i; |
| for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { |
| if (rxq->pool[i].page != NULL) { |
| pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, |
| PAGE_SIZE << priv->hw_params.rx_page_order, |
| PCI_DMA_FROMDEVICE); |
| __iwl_legacy_free_pages(priv, rxq->pool[i].page); |
| rxq->pool[i].page = NULL; |
| } |
| } |
| |
| dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, |
| rxq->bd_dma); |
| dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), |
| rxq->rb_stts, rxq->rb_stts_dma); |
| rxq->bd = NULL; |
| rxq->rb_stts = NULL; |
| } |
| |
| int iwl4965_rxq_stop(struct iwl_priv *priv) |
| { |
| |
| /* stop Rx DMA */ |
| iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, |
| FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); |
| |
| return 0; |
| } |
| |
| int iwl4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) |
| { |
| int idx = 0; |
| int band_offset = 0; |
| |
| /* HT rate format: mac80211 wants an MCS number, which is just LSB */ |
| if (rate_n_flags & RATE_MCS_HT_MSK) { |
| idx = (rate_n_flags & 0xff); |
| return idx; |
| /* Legacy rate format, search for match in table */ |
| } else { |
| if (band == IEEE80211_BAND_5GHZ) |
| band_offset = IWL_FIRST_OFDM_RATE; |
| for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) |
| if (iwlegacy_rates[idx].plcp == (rate_n_flags & 0xFF)) |
| return idx - band_offset; |
| } |
| |
| return -1; |
| } |
| |
| static int iwl4965_calc_rssi(struct iwl_priv *priv, |
| struct iwl_rx_phy_res *rx_resp) |
| { |
| /* data from PHY/DSP regarding signal strength, etc., |
| * contents are always there, not configurable by host. */ |
| struct iwl4965_rx_non_cfg_phy *ncphy = |
| (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; |
| u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) |
| >> IWL49_AGC_DB_POS; |
| |
| u32 valid_antennae = |
| (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) |
| >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; |
| u8 max_rssi = 0; |
| u32 i; |
| |
| /* Find max rssi among 3 possible receivers. |
| * These values are measured by the digital signal processor (DSP). |
| * They should stay fairly constant even as the signal strength varies, |
| * if the radio's automatic gain control (AGC) is working right. |
| * AGC value (see below) will provide the "interesting" info. */ |
| for (i = 0; i < 3; i++) |
| if (valid_antennae & (1 << i)) |
| max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); |
| |
| IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", |
| ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], |
| max_rssi, agc); |
| |
| /* dBm = max_rssi dB - agc dB - constant. |
| * Higher AGC (higher radio gain) means lower signal. */ |
| return max_rssi - agc - IWL4965_RSSI_OFFSET; |
| } |
| |
| |
| static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) |
| { |
| u32 decrypt_out = 0; |
| |
| if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == |
| RX_RES_STATUS_STATION_FOUND) |
| decrypt_out |= (RX_RES_STATUS_STATION_FOUND | |
| RX_RES_STATUS_NO_STATION_INFO_MISMATCH); |
| |
| decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); |
| |
| /* packet was not encrypted */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_NONE) |
| return decrypt_out; |
| |
| /* packet was encrypted with unknown alg */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_ERR) |
| return decrypt_out; |
| |
| /* decryption was not done in HW */ |
| if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != |
| RX_MPDU_RES_STATUS_DEC_DONE_MSK) |
| return decrypt_out; |
| |
| switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { |
| |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| /* alg is CCM: check MIC only */ |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) |
| /* Bad MIC */ |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { |
| /* Bad TTAK */ |
| decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; |
| break; |
| } |
| /* fall through if TTAK OK */ |
| default: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| break; |
| } |
| |
| IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", |
| decrypt_in, decrypt_out); |
| |
| return decrypt_out; |
| } |
| |
| static void iwl4965_pass_packet_to_mac80211(struct iwl_priv *priv, |
| struct ieee80211_hdr *hdr, |
| u16 len, |
| u32 ampdu_status, |
| struct iwl_rx_mem_buffer *rxb, |
| struct ieee80211_rx_status *stats) |
| { |
| struct sk_buff *skb; |
| __le16 fc = hdr->frame_control; |
| |
| /* We only process data packets if the interface is open */ |
| if (unlikely(!priv->is_open)) { |
| IWL_DEBUG_DROP_LIMIT(priv, |
| "Dropping packet while interface is not open.\n"); |
| return; |
| } |
| |
| /* In case of HW accelerated crypto and bad decryption, drop */ |
| if (!priv->cfg->mod_params->sw_crypto && |
| iwl_legacy_set_decrypted_flag(priv, hdr, ampdu_status, stats)) |
| return; |
| |
| skb = dev_alloc_skb(128); |
| if (!skb) { |
| IWL_ERR(priv, "dev_alloc_skb failed\n"); |
| return; |
| } |
| |
| skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); |
| |
| iwl_legacy_update_stats(priv, false, fc, len); |
| memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); |
| |
| ieee80211_rx(priv->hw, skb); |
| priv->alloc_rxb_page--; |
| rxb->page = NULL; |
| } |
| |
| /* Called for REPLY_RX (legacy ABG frames), or |
| * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ |
| void iwl4965_rx_reply_rx(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct ieee80211_hdr *header; |
| struct ieee80211_rx_status rx_status; |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_rx_phy_res *phy_res; |
| __le32 rx_pkt_status; |
| struct iwl_rx_mpdu_res_start *amsdu; |
| u32 len; |
| u32 ampdu_status; |
| u32 rate_n_flags; |
| |
| /** |
| * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. |
| * REPLY_RX: physical layer info is in this buffer |
| * REPLY_RX_MPDU_CMD: physical layer info was sent in separate |
| * command and cached in priv->last_phy_res |
| * |
| * Here we set up local variables depending on which command is |
| * received. |
| */ |
| if (pkt->hdr.cmd == REPLY_RX) { |
| phy_res = (struct iwl_rx_phy_res *)pkt->u.raw; |
| header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) |
| + phy_res->cfg_phy_cnt); |
| |
| len = le16_to_cpu(phy_res->byte_count); |
| rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) + |
| phy_res->cfg_phy_cnt + len); |
| ampdu_status = le32_to_cpu(rx_pkt_status); |
| } else { |
| if (!priv->_4965.last_phy_res_valid) { |
| IWL_ERR(priv, "MPDU frame without cached PHY data\n"); |
| return; |
| } |
| phy_res = &priv->_4965.last_phy_res; |
| amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw; |
| header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len); |
| ampdu_status = iwl4965_translate_rx_status(priv, |
| le32_to_cpu(rx_pkt_status)); |
| } |
| |
| if ((unlikely(phy_res->cfg_phy_cnt > 20))) { |
| IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", |
| phy_res->cfg_phy_cnt); |
| return; |
| } |
| |
| if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || |
| !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { |
| IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", |
| le32_to_cpu(rx_pkt_status)); |
| return; |
| } |
| |
| /* This will be used in several places later */ |
| rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); |
| |
| /* rx_status carries information about the packet to mac80211 */ |
| rx_status.mactime = le64_to_cpu(phy_res->timestamp); |
| rx_status.freq = |
| ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), |
| rx_status.band); |
| rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? |
| IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; |
| rx_status.rate_idx = |
| iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); |
| rx_status.flag = 0; |
| |
| /* TSF isn't reliable. In order to allow smooth user experience, |
| * this W/A doesn't propagate it to the mac80211 */ |
| /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ |
| |
| priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); |
| |
| /* Find max signal strength (dBm) among 3 antenna/receiver chains */ |
| rx_status.signal = iwl4965_calc_rssi(priv, phy_res); |
| |
| iwl_legacy_dbg_log_rx_data_frame(priv, len, header); |
| IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", |
| rx_status.signal, (unsigned long long)rx_status.mactime); |
| |
| /* |
| * "antenna number" |
| * |
| * It seems that the antenna field in the phy flags value |
| * is actually a bit field. This is undefined by radiotap, |
| * it wants an actual antenna number but I always get "7" |
| * for most legacy frames I receive indicating that the |
| * same frame was received on all three RX chains. |
| * |
| * I think this field should be removed in favor of a |
| * new 802.11n radiotap field "RX chains" that is defined |
| * as a bitmask. |
| */ |
| rx_status.antenna = |
| (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) |
| >> RX_RES_PHY_FLAGS_ANTENNA_POS; |
| |
| /* set the preamble flag if appropriate */ |
| if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) |
| rx_status.flag |= RX_FLAG_SHORTPRE; |
| |
| /* Set up the HT phy flags */ |
| if (rate_n_flags & RATE_MCS_HT_MSK) |
| rx_status.flag |= RX_FLAG_HT; |
| if (rate_n_flags & RATE_MCS_HT40_MSK) |
| rx_status.flag |= RX_FLAG_40MHZ; |
| if (rate_n_flags & RATE_MCS_SGI_MSK) |
| rx_status.flag |= RX_FLAG_SHORT_GI; |
| |
| iwl4965_pass_packet_to_mac80211(priv, header, len, ampdu_status, |
| rxb, &rx_status); |
| } |
| |
| /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). |
| * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ |
| void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| priv->_4965.last_phy_res_valid = true; |
| memcpy(&priv->_4965.last_phy_res, pkt->u.raw, |
| sizeof(struct iwl_rx_phy_res)); |
| } |
| |
| static int iwl4965_get_single_channel_for_scan(struct iwl_priv *priv, |
| struct ieee80211_vif *vif, |
| enum ieee80211_band band, |
| struct iwl_scan_channel *scan_ch) |
| { |
| const struct ieee80211_supported_band *sband; |
| u16 passive_dwell = 0; |
| u16 active_dwell = 0; |
| int added = 0; |
| u16 channel = 0; |
| |
| sband = iwl_get_hw_mode(priv, band); |
| if (!sband) { |
| IWL_ERR(priv, "invalid band\n"); |
| return added; |
| } |
| |
| active_dwell = iwl_legacy_get_active_dwell_time(priv, band, 0); |
| passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif); |
| |
| if (passive_dwell <= active_dwell) |
| passive_dwell = active_dwell + 1; |
| |
| channel = iwl_legacy_get_single_channel_number(priv, band); |
| if (channel) { |
| scan_ch->channel = cpu_to_le16(channel); |
| scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; |
| scan_ch->active_dwell = cpu_to_le16(active_dwell); |
| scan_ch->passive_dwell = cpu_to_le16(passive_dwell); |
| /* Set txpower levels to defaults */ |
| scan_ch->dsp_atten = 110; |
| if (band == IEEE80211_BAND_5GHZ) |
| scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; |
| else |
| scan_ch->tx_gain = ((1 << 5) | (5 << 3)); |
| added++; |
| } else |
| IWL_ERR(priv, "no valid channel found\n"); |
| return added; |
| } |
| |
| static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, |
| struct ieee80211_vif *vif, |
| enum ieee80211_band band, |
| u8 is_active, u8 n_probes, |
| struct iwl_scan_channel *scan_ch) |
| { |
| struct ieee80211_channel *chan; |
| const struct ieee80211_supported_band *sband; |
| const struct iwl_channel_info *ch_info; |
| u16 passive_dwell = 0; |
| u16 active_dwell = 0; |
| int added, i; |
| u16 channel; |
| |
| sband = iwl_get_hw_mode(priv, band); |
| if (!sband) |
| return 0; |
| |
| active_dwell = iwl_legacy_get_active_dwell_time(priv, band, n_probes); |
| passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif); |
| |
| if (passive_dwell <= active_dwell) |
| passive_dwell = active_dwell + 1; |
| |
| for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { |
| chan = priv->scan_request->channels[i]; |
| |
| if (chan->band != band) |
| continue; |
| |
| channel = chan->hw_value; |
| scan_ch->channel = cpu_to_le16(channel); |
| |
| ch_info = iwl_legacy_get_channel_info(priv, band, channel); |
| if (!iwl_legacy_is_channel_valid(ch_info)) { |
| IWL_DEBUG_SCAN(priv, |
| "Channel %d is INVALID for this band.\n", |
| channel); |
| continue; |
| } |
| |
| if (!is_active || iwl_legacy_is_channel_passive(ch_info) || |
| (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) |
| scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; |
| else |
| scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; |
| |
| if (n_probes) |
| scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); |
| |
| scan_ch->active_dwell = cpu_to_le16(active_dwell); |
| scan_ch->passive_dwell = cpu_to_le16(passive_dwell); |
| |
| /* Set txpower levels to defaults */ |
| scan_ch->dsp_atten = 110; |
| |
| /* NOTE: if we were doing 6Mb OFDM for scans we'd use |
| * power level: |
| * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; |
| */ |
| if (band == IEEE80211_BAND_5GHZ) |
| scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; |
| else |
| scan_ch->tx_gain = ((1 << 5) | (5 << 3)); |
| |
| IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", |
| channel, le32_to_cpu(scan_ch->type), |
| (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? |
| "ACTIVE" : "PASSIVE", |
| (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? |
| active_dwell : passive_dwell); |
| |
| scan_ch++; |
| added++; |
| } |
| |
| IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); |
| return added; |
| } |
| |
| int iwl4965_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) |
| { |
| struct iwl_host_cmd cmd = { |
| .id = REPLY_SCAN_CMD, |
| .len = sizeof(struct iwl_scan_cmd), |
| .flags = CMD_SIZE_HUGE, |
| }; |
| struct iwl_scan_cmd *scan; |
| struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; |
| u32 rate_flags = 0; |
| u16 cmd_len; |
| u16 rx_chain = 0; |
| enum ieee80211_band band; |
| u8 n_probes = 0; |
| u8 rx_ant = priv->hw_params.valid_rx_ant; |
| u8 rate; |
| bool is_active = false; |
| int chan_mod; |
| u8 active_chains; |
| u8 scan_tx_antennas = priv->hw_params.valid_tx_ant; |
| int ret; |
| |
| lockdep_assert_held(&priv->mutex); |
| |
| if (vif) |
| ctx = iwl_legacy_rxon_ctx_from_vif(vif); |
| |
| if (!priv->scan_cmd) { |
| priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) + |
| IWL_MAX_SCAN_SIZE, GFP_KERNEL); |
| if (!priv->scan_cmd) { |
| IWL_DEBUG_SCAN(priv, |
| "fail to allocate memory for scan\n"); |
| return -ENOMEM; |
| } |
| } |
| scan = priv->scan_cmd; |
| memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); |
| |
| scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; |
| scan->quiet_time = IWL_ACTIVE_QUIET_TIME; |
| |
| if (iwl_legacy_is_any_associated(priv)) { |
| u16 interval = 0; |
| u32 extra; |
| u32 suspend_time = 100; |
| u32 scan_suspend_time = 100; |
| |
| IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); |
| if (priv->is_internal_short_scan) |
| interval = 0; |
| else |
| interval = vif->bss_conf.beacon_int; |
| |
| scan->suspend_time = 0; |
| scan->max_out_time = cpu_to_le32(200 * 1024); |
| if (!interval) |
| interval = suspend_time; |
| |
| extra = (suspend_time / interval) << 22; |
| scan_suspend_time = (extra | |
| ((suspend_time % interval) * 1024)); |
| scan->suspend_time = cpu_to_le32(scan_suspend_time); |
| IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", |
| scan_suspend_time, interval); |
| } |
| |
| if (priv->is_internal_short_scan) { |
| IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); |
| } else if (priv->scan_request->n_ssids) { |
| int i, p = 0; |
| IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); |
| for (i = 0; i < priv->scan_request->n_ssids; i++) { |
| /* always does wildcard anyway */ |
| if (!priv->scan_request->ssids[i].ssid_len) |
| continue; |
| scan->direct_scan[p].id = WLAN_EID_SSID; |
| scan->direct_scan[p].len = |
| priv->scan_request->ssids[i].ssid_len; |
| memcpy(scan->direct_scan[p].ssid, |
| priv->scan_request->ssids[i].ssid, |
| priv->scan_request->ssids[i].ssid_len); |
| n_probes++; |
| p++; |
| } |
| is_active = true; |
| } else |
| IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); |
| |
| scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; |
| scan->tx_cmd.sta_id = ctx->bcast_sta_id; |
| scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| |
| switch (priv->scan_band) { |
| case IEEE80211_BAND_2GHZ: |
| scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; |
| chan_mod = le32_to_cpu( |
| priv->contexts[IWL_RXON_CTX_BSS].active.flags & |
| RXON_FLG_CHANNEL_MODE_MSK) |
| >> RXON_FLG_CHANNEL_MODE_POS; |
| if (chan_mod == CHANNEL_MODE_PURE_40) { |
| rate = IWL_RATE_6M_PLCP; |
| } else { |
| rate = IWL_RATE_1M_PLCP; |
| rate_flags = RATE_MCS_CCK_MSK; |
| } |
| break; |
| case IEEE80211_BAND_5GHZ: |
| rate = IWL_RATE_6M_PLCP; |
| break; |
| default: |
| IWL_WARN(priv, "Invalid scan band\n"); |
| return -EIO; |
| } |
| |
| /* |
| * If active scanning is requested but a certain channel is |
| * marked passive, we can do active scanning if we detect |
| * transmissions. |
| * |
| * There is an issue with some firmware versions that triggers |
| * a sysassert on a "good CRC threshold" of zero (== disabled), |
| * on a radar channel even though this means that we should NOT |
| * send probes. |
| * |
| * The "good CRC threshold" is the number of frames that we |
| * need to receive during our dwell time on a channel before |
| * sending out probes -- setting this to a huge value will |
| * mean we never reach it, but at the same time work around |
| * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER |
| * here instead of IWL_GOOD_CRC_TH_DISABLED. |
| */ |
| scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : |
| IWL_GOOD_CRC_TH_NEVER; |
| |
| band = priv->scan_band; |
| |
| if (priv->cfg->scan_rx_antennas[band]) |
| rx_ant = priv->cfg->scan_rx_antennas[band]; |
| |
| priv->scan_tx_ant[band] = iwl4965_toggle_tx_ant(priv, |
| priv->scan_tx_ant[band], |
| scan_tx_antennas); |
| rate_flags |= iwl4965_ant_idx_to_flags(priv->scan_tx_ant[band]); |
| scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, rate_flags); |
| |
| /* In power save mode use one chain, otherwise use all chains */ |
| if (test_bit(STATUS_POWER_PMI, &priv->status)) { |
| /* rx_ant has been set to all valid chains previously */ |
| active_chains = rx_ant & |
| ((u8)(priv->chain_noise_data.active_chains)); |
| if (!active_chains) |
| active_chains = rx_ant; |
| |
| IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", |
| priv->chain_noise_data.active_chains); |
| |
| rx_ant = iwl4965_first_antenna(active_chains); |
| } |
| |
| /* MIMO is not used here, but value is required */ |
| rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; |
| rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; |
| rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; |
| rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; |
| scan->rx_chain = cpu_to_le16(rx_chain); |
| if (!priv->is_internal_short_scan) { |
| cmd_len = iwl_legacy_fill_probe_req(priv, |
| (struct ieee80211_mgmt *)scan->data, |
| vif->addr, |
| priv->scan_request->ie, |
| priv->scan_request->ie_len, |
| IWL_MAX_SCAN_SIZE - sizeof(*scan)); |
| } else { |
| /* use bcast addr, will not be transmitted but must be valid */ |
| cmd_len = iwl_legacy_fill_probe_req(priv, |
| (struct ieee80211_mgmt *)scan->data, |
| iwlegacy_bcast_addr, NULL, 0, |
| IWL_MAX_SCAN_SIZE - sizeof(*scan)); |
| |
| } |
| scan->tx_cmd.len = cpu_to_le16(cmd_len); |
| |
| scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | |
| RXON_FILTER_BCON_AWARE_MSK); |
| |
| if (priv->is_internal_short_scan) { |
| scan->channel_count = |
| iwl4965_get_single_channel_for_scan(priv, vif, band, |
| (void *)&scan->data[le16_to_cpu( |
| scan->tx_cmd.len)]); |
| } else { |
| scan->channel_count = |
| iwl4965_get_channels_for_scan(priv, vif, band, |
| is_active, n_probes, |
| (void *)&scan->data[le16_to_cpu( |
| scan->tx_cmd.len)]); |
| } |
| if (scan->channel_count == 0) { |
| IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); |
| return -EIO; |
| } |
| |
| cmd.len += le16_to_cpu(scan->tx_cmd.len) + |
| scan->channel_count * sizeof(struct iwl_scan_channel); |
| cmd.data = scan; |
| scan->len = cpu_to_le16(cmd.len); |
| |
| set_bit(STATUS_SCAN_HW, &priv->status); |
| |
| ret = iwl_legacy_send_cmd_sync(priv, &cmd); |
| if (ret) |
| clear_bit(STATUS_SCAN_HW, &priv->status); |
| |
| return ret; |
| } |
| |
| int iwl4965_manage_ibss_station(struct iwl_priv *priv, |
| struct ieee80211_vif *vif, bool add) |
| { |
| struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; |
| |
| if (add) |
| return iwl4965_add_bssid_station(priv, vif_priv->ctx, |
| vif->bss_conf.bssid, |
| &vif_priv->ibss_bssid_sta_id); |
| return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id, |
| vif->bss_conf.bssid); |
| } |
| |
| void iwl4965_free_tfds_in_queue(struct iwl_priv *priv, |
| int sta_id, int tid, int freed) |
| { |
| lockdep_assert_held(&priv->sta_lock); |
| |
| if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) |
| priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; |
| else { |
| IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n", |
| priv->stations[sta_id].tid[tid].tfds_in_queue, |
| freed); |
| priv->stations[sta_id].tid[tid].tfds_in_queue = 0; |
| } |
| } |
| |
| #define IWL_TX_QUEUE_MSK 0xfffff |
| |
| static bool iwl4965_is_single_rx_stream(struct iwl_priv *priv) |
| { |
| return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || |
| priv->current_ht_config.single_chain_sufficient; |
| } |
| |
| #define IWL_NUM_RX_CHAINS_MULTIPLE 3 |
| #define IWL_NUM_RX_CHAINS_SINGLE 2 |
| #define IWL_NUM_IDLE_CHAINS_DUAL 2 |
| #define IWL_NUM_IDLE_CHAINS_SINGLE 1 |
| |
| /* |
| * Determine how many receiver/antenna chains to use. |
| * |
| * More provides better reception via diversity. Fewer saves power |
| * at the expense of throughput, but only when not in powersave to |
| * start with. |
| * |
| * MIMO (dual stream) requires at least 2, but works better with 3. |
| * This does not determine *which* chains to use, just how many. |
| */ |
| static int iwl4965_get_active_rx_chain_count(struct iwl_priv *priv) |
| { |
| /* # of Rx chains to use when expecting MIMO. */ |
| if (iwl4965_is_single_rx_stream(priv)) |
| return IWL_NUM_RX_CHAINS_SINGLE; |
| else |
| return IWL_NUM_RX_CHAINS_MULTIPLE; |
| } |
| |
| /* |
| * When we are in power saving mode, unless device support spatial |
| * multiplexing power save, use the active count for rx chain count. |
| */ |
| static int |
| iwl4965_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) |
| { |
| /* # Rx chains when idling, depending on SMPS mode */ |
| switch (priv->current_ht_config.smps) { |
| case IEEE80211_SMPS_STATIC: |
| case IEEE80211_SMPS_DYNAMIC: |
| return IWL_NUM_IDLE_CHAINS_SINGLE; |
| case IEEE80211_SMPS_OFF: |
| return active_cnt; |
| default: |
| WARN(1, "invalid SMPS mode %d", |
| priv->current_ht_config.smps); |
| return active_cnt; |
| } |
| } |
| |
| /* up to 4 chains */ |
| static u8 iwl4965_count_chain_bitmap(u32 chain_bitmap) |
| { |
| u8 res; |
| res = (chain_bitmap & BIT(0)) >> 0; |
| res += (chain_bitmap & BIT(1)) >> 1; |
| res += (chain_bitmap & BIT(2)) >> 2; |
| res += (chain_bitmap & BIT(3)) >> 3; |
| return res; |
| } |
| |
| /** |
| * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image |
| * |
| * Selects how many and which Rx receivers/antennas/chains to use. |
| * This should not be used for scan command ... it puts data in wrong place. |
| */ |
| void iwl4965_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) |
| { |
| bool is_single = iwl4965_is_single_rx_stream(priv); |
| bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); |
| u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; |
| u32 active_chains; |
| u16 rx_chain; |
| |
| /* Tell uCode which antennas are actually connected. |
| * Before first association, we assume all antennas are connected. |
| * Just after first association, iwl4965_chain_noise_calibration() |
| * checks which antennas actually *are* connected. */ |
| if (priv->chain_noise_data.active_chains) |
| active_chains = priv->chain_noise_data.active_chains; |
| else |
| active_chains = priv->hw_params.valid_rx_ant; |
| |
| rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; |
| |
| /* How many receivers should we use? */ |
| active_rx_cnt = iwl4965_get_active_rx_chain_count(priv); |
| idle_rx_cnt = iwl4965_get_idle_rx_chain_count(priv, active_rx_cnt); |
| |
| |
| /* correct rx chain count according hw settings |
| * and chain noise calibration |
| */ |
| valid_rx_cnt = iwl4965_count_chain_bitmap(active_chains); |
| if (valid_rx_cnt < active_rx_cnt) |
| active_rx_cnt = valid_rx_cnt; |
| |
| if (valid_rx_cnt < idle_rx_cnt) |
| idle_rx_cnt = valid_rx_cnt; |
| |
| rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; |
| rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; |
| |
| ctx->staging.rx_chain = cpu_to_le16(rx_chain); |
| |
| if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) |
| ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; |
| else |
| ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; |
| |
| IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", |
| ctx->staging.rx_chain, |
| active_rx_cnt, idle_rx_cnt); |
| |
| WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || |
| active_rx_cnt < idle_rx_cnt); |
| } |
| |
| u8 iwl4965_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) |
| { |
| int i; |
| u8 ind = ant; |
| |
| for (i = 0; i < RATE_ANT_NUM - 1; i++) { |
| ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; |
| if (valid & BIT(ind)) |
| return ind; |
| } |
| return ant; |
| } |
| |
| static const char *iwl4965_get_fh_string(int cmd) |
| { |
| switch (cmd) { |
| IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); |
| IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); |
| IWL_CMD(FH_RSCSR_CHNL0_WPTR); |
| IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); |
| IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); |
| IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); |
| IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); |
| IWL_CMD(FH_TSSR_TX_STATUS_REG); |
| IWL_CMD(FH_TSSR_TX_ERROR_REG); |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| int iwl4965_dump_fh(struct iwl_priv *priv, char **buf, bool display) |
| { |
| int i; |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| int pos = 0; |
| size_t bufsz = 0; |
| #endif |
| static const u32 fh_tbl[] = { |
| FH_RSCSR_CHNL0_STTS_WPTR_REG, |
| FH_RSCSR_CHNL0_RBDCB_BASE_REG, |
| FH_RSCSR_CHNL0_WPTR, |
| FH_MEM_RCSR_CHNL0_CONFIG_REG, |
| FH_MEM_RSSR_SHARED_CTRL_REG, |
| FH_MEM_RSSR_RX_STATUS_REG, |
| FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, |
| FH_TSSR_TX_STATUS_REG, |
| FH_TSSR_TX_ERROR_REG |
| }; |
| #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG |
| if (display) { |
| bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; |
| *buf = kmalloc(bufsz, GFP_KERNEL); |
| if (!*buf) |
| return -ENOMEM; |
| pos += scnprintf(*buf + pos, bufsz - pos, |
| "FH register values:\n"); |
| for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { |
| pos += scnprintf(*buf + pos, bufsz - pos, |
| " %34s: 0X%08x\n", |
| iwl4965_get_fh_string(fh_tbl[i]), |
| iwl_legacy_read_direct32(priv, fh_tbl[i])); |
| } |
| return pos; |
| } |
| #endif |
| IWL_ERR(priv, "FH register values:\n"); |
| for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { |
| IWL_ERR(priv, " %34s: 0X%08x\n", |
| iwl4965_get_fh_string(fh_tbl[i]), |
| iwl_legacy_read_direct32(priv, fh_tbl[i])); |
| } |
| return 0; |
| } |