Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c7d321a..2b39030 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,9 +158,8 @@
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := imx
-machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MX3) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
-machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index b39b5ce..c9436d0 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -15,6 +15,7 @@
CONFIG_ARCH_MX1=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index e3c9032..0ace16c 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -13,7 +13,7 @@
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
CONFIG_MACH_MX51_BABBAGE=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56b930a..59c97a3 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
config IMX_HAVE_DMA_V1
bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+ bool
+
+config ARCH_MX35
+ bool
config SOC_IMX1
bool
@@ -31,6 +41,24 @@
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
+config SOC_IMX31
+ bool
+ select CPU_V6
+ select IMX_HAVE_PLATFORM_MXC_RNGA
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_MX31
+ select MXC_AVIC
+
+config SOC_IMX35
+ bool
+ select CPU_V6
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select HAVE_EPIT
+ select ARCH_MX35
+ select MXC_AVIC
+
+
if ARCH_MX1
comment "MX1 platforms:"
@@ -40,6 +68,7 @@
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
+ select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
help
@@ -51,6 +80,13 @@
help
Say Y here if you are using a Synertronixx scb9328 board
+config MACH_APF9328
+ bool "APF9328"
+ select SOC_IMX1
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Say Yes here if you are using the Armadeus APF9328 development board
+
endif
if ARCH_MX2
@@ -129,6 +165,7 @@
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
@@ -254,6 +291,7 @@
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
@@ -314,3 +352,251 @@
configurations for the board and its peripherals.
endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+ bool "Support MX31ADS platforms"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ default y
+ help
+ Include support for MX31ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+ bool "Support Wolfson Microelectronics 1133-EV1 module"
+ depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ Include support for the Wolfson Microelectronics 1133-EV1 PMU
+ and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+ bool "Support MX31 LITEKIT (LogicPD)"
+ select SOC_IMX31
+ select MXC_ULPI if USB_ULPI
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX31 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_PCM037
+ bool "Support Phytec pcm037 (i.MX31) platforms"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Phytec pcm037 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+ bool "Support pcm037 EET board extensions"
+ depends on MACH_PCM037
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Add support for PCM037 EET baseboard extensions. If you are using the
+ OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+ command-line parameter.
+
+config MACH_MX31_3DS
+ bool "Support MX31PDK (3DS)"
+ select SOC_IMX31
+ select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for MX31PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+ bool "Support mx31moboard platforms (EPFL Mobots group)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for mx31moboard platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_QONG
+ bool "Support Dave/DENX QongEVB-LITE platform"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for Dave/DENX QongEVB-LITE platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+ bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for KZM-ARM11-01. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_BUG
+ bool "Support Buglabs BUGBase platform"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ default y
+ help
+ Include support for BUGBase 1.3 platform. This includes specific
+ configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select SOC_IMX35
+ select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+ bool "Support Eukrea CPUIMX35 Platform"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Eukrea CPUIMX35 platform. This includes
+ specific configurations for the board and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX35
+ default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+ bool "Support VPR200 platform"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for VPR200 platform. This includes specific
+ configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index b85794d..e9eb36d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,9 +1,3 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
@@ -14,18 +8,27 @@
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
+# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
@@ -37,3 +40,24 @@
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3953d60..ebee18b 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -13,3 +13,7 @@
zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
+
+zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000
+params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
new file mode 100644
index 0000000..69d1322
--- /dev/null
+++ b/arch/arm/mach-imx/cache-l2x0.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+
+static int mxc_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+ void __iomem *clkctl_base;
+
+ if (!cpu_is_mx31() && !cpu_is_mx35())
+ return 0;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+ clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+ if (clkctl_base != NULL) {
+ writel(0x00000515, clkctl_base + L2_MEM_VAL);
+ iounmap(clkctl_base);
+ } else {
+ pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+ }
+
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return 0;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+ return 0;
+}
+arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
similarity index 99%
rename from arch/arm/mach-mx3/clock-imx31.c
rename to arch/arm/mach-imx/clock-imx31.c
index d423cac..25f343f 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -32,7 +32,7 @@
#include <mach/mx31.h>
#include <mach/common.h>
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
@@ -627,4 +627,3 @@
return 0;
}
-
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
similarity index 99%
rename from arch/arm/mach-mx3/clock-imx35.c
rename to arch/arm/mach-imx/clock-imx35.c
index 448a038..5a4cc1e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -547,4 +547,3 @@
return 0;
}
-
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-imx/cpu-imx31.c
similarity index 71%
rename from arch/arm/mach-mx3/cpu.c
rename to arch/arm/mach-imx/cpu-imx31.c
index d1d3395..a378070 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -1,5 +1,5 @@
/*
- * MX3 CPU type detection
+ * MX31 CPU type detection
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
@@ -17,14 +17,12 @@
unsigned int mx31_cpu_rev;
EXPORT_SYMBOL(mx31_cpu_rev);
-struct mx3_cpu_type {
+static struct {
u8 srev;
const char *name;
const char *v;
unsigned int rev;
-};
-
-static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+} mx31_cpu_type[] __initdata = {
{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
{ .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
{ .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
@@ -57,33 +55,3 @@
printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
}
-
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
-
-void __init mx35_read_cpu_rev(void)
-{
- u32 rev;
- char *srev;
-
- rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
- switch (rev) {
- case 0x00:
- mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
- srev = "1.0";
- break;
- case 0x10:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
- srev = "2.0";
- break;
- case 0x11:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
- srev = "2.1";
- break;
- default:
- mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
- srev = "unknown";
- }
-
- printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
-}
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
new file mode 100644
index 0000000..6637cd8
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -0,0 +1,44 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+ u32 rev;
+ char *srev;
+
+ rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+ switch (rev) {
+ case 0x00:
+ mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
+ srev = "1.0";
+ break;
+ case 0x10:
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
+ srev = "2.0";
+ break;
+ case 0x11:
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
+ srev = "2.1";
+ break;
+ default:
+ mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+ srev = "unknown";
+ }
+
+ printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-imx/crmregs-imx31.h
similarity index 100%
rename from arch/arm/mach-mx3/crm_regs.h
rename to arch/arm/mach-imx/crmregs-imx31.h
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index da59365..3aad1e7 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -9,21 +9,21 @@
#include <mach/mx1.h>
#include <mach/devices-common.h>
-extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx1_imx_fb_data;
#define imx1_add_imx_fb(pdata) \
imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
#define imx1_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
#define imx1_add_imx_uart(id, pdata) \
imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata)
#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata)
-extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx1_cspi_data[];
#define imx1_add_cspi(id, pdata) \
imx_add_spi_imx(&imx1_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 16744d2..2628e0c 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,31 +9,31 @@
#include <mach/mx21.h>
#include <mach/devices-common.h>
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
#define imx21_add_imx21_hcd(pdata) \
imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
#define imx21_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
-extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx21_imx_fb_data;
#define imx21_add_imx_fb(pdata) \
imx_add_imx_fb(&imx21_imx_fb_data, pdata)
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
#define imx21_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
#define imx21_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
#define imx21_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
#define imx21_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
@@ -41,19 +41,19 @@
#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
#define imx21_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
#define imx21_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
#define imx21_add_mxc_w1(pdata) \
imx_add_mxc_w1(&imx21_mxc_w1_data)
-extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx21_cspi_data[];
#define imx21_add_cspi(id, pdata) \
imx_add_spi_imx(&imx21_cspi_data[id], pdata)
#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index b591d72..efa0761 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -9,48 +9,48 @@
#include <mach/mx25.h>
#include <mach/devices-common.h>
-extern const struct imx_fec_data imx25_fec_data __initconst;
+extern const struct imx_fec_data imx25_fec_data;
#define imx25_add_fec(pdata) \
imx_add_fec(&imx25_fec_data, pdata)
-extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx25_flexcan_data[];
#define imx25_add_flexcan(id, pdata) \
imx_add_flexcan(&imx25_flexcan_data[id], pdata)
#define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata)
#define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata)
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
#define imx25_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
#define imx25_add_imxdi_rtc(pdata) \
imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
#define imx25_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx25_imx_fb_data;
#define imx25_add_imx_fb(pdata) \
imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
#define imx25_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
#define imx25_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
#define imx25_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
#define imx25_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
@@ -59,33 +59,32 @@
#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
#define imx25_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
#define imx25_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
#define imx25_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-extern const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
#define imx25_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
-extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[];
#define imx25_add_spi_imx(id, pdata) \
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst;
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
#define imx25_add_mxc_pwm(id) \
imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index f1272d4..7f97a3c 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -9,35 +9,35 @@
#include <mach/mx27.h>
#include <mach/devices-common.h>
-extern const struct imx_fec_data imx27_fec_data __initconst;
+extern const struct imx_fec_data imx27_fec_data;
#define imx27_add_fec(pdata) \
imx_add_fec(&imx27_fec_data, pdata)
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
#define imx27_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
#define imx27_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
-extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx27_imx_fb_data;
#define imx27_add_imx_fb(pdata) \
imx_add_imx_fb(&imx27_imx_fb_data, pdata)
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
#define imx27_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
#define imx27_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
#define imx27_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
#define imx27_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
@@ -47,30 +47,30 @@
#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
#define imx27_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
#define imx27_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
#define imx27_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
#define imx27_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
#define imx27_add_mxc_w1(pdata) \
imx_add_mxc_w1(&imx27_mxc_w1_data)
-extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx27_cspi_data[];
#define imx27_add_cspi(id, pdata) \
imx_add_spi_imx(&imx27_cspi_data[id], pdata)
#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
similarity index 67%
rename from arch/arm/mach-mx3/devices-imx31.h
rename to arch/arm/mach-imx/devices-imx31.h
index 40f4e84..dbe940d 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -9,30 +9,30 @@
#include <mach/mx31.h>
#include <mach/devices-common.h>
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
#define imx31_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
#define imx31_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx31_imx2_wdt_data)
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
#define imx31_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
#define imx31_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
#define imx31_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
#define imx31_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
@@ -41,26 +41,38 @@
#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core(pdata) \
+ imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_alloc_mx3_camera(pdata) \
+ imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata) \
+ imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
#define imx31_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
#define imx31_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
#define imx31_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
#define imx31_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc(pdata) \
+ imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
#define imx31_add_mxc_w1(pdata) \
imx_add_mxc_w1(&imx31_mxc_w1_data)
-extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx31_cspi_data[];
#define imx31_add_cspi(id, pdata) \
imx_add_spi_imx(&imx31_cspi_data[id], pdata)
#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
similarity index 69%
rename from arch/arm/mach-mx3/devices-imx35.h
rename to arch/arm/mach-imx/devices-imx35.h
index d545d86..234cbd3 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -9,67 +9,74 @@
#include <mach/mx35.h>
#include <mach/devices-common.h>
-extern const struct imx_fec_data imx35_fec_data __initconst;
+extern const struct imx_fec_data imx35_fec_data;
#define imx35_add_fec(pdata) \
imx_add_fec(&imx35_fec_data, pdata)
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
#define imx35_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
-extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx35_flexcan_data[];
#define imx35_add_flexcan(id, pdata) \
imx_add_flexcan(&imx35_flexcan_data[id], pdata)
#define imx35_add_flexcan0(pdata) imx35_add_flexcan(0, pdata)
#define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata)
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
#define imx35_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx35_imx2_wdt_data)
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
#define imx35_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
#define imx35_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
#define imx35_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
#define imx35_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core(pdata) \
+ imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_alloc_mx3_camera(pdata) \
+ imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata) \
+ imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
#define imx35_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
#define imx35_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
#define imx35_add_mxc_w1(pdata) \
imx_add_mxc_w1(&imx35_mxc_w1_data)
-extern const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
#define imx35_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
-extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx35_cspi_data[];
#define imx35_add_cspi(id, pdata) \
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
similarity index 99%
rename from arch/arm/mach-mx3/ehci-imx31.c
rename to arch/arm/mach-imx/ehci-imx31.c
index 314a983..faad0f1 100644
--- a/arch/arm/mach-mx3/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -80,4 +80,3 @@
return 0;
}
-
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
similarity index 99%
rename from arch/arm/mach-mx3/ehci-imx35.c
rename to arch/arm/mach-imx/ehci-imx35.c
index 33983a4..001ec39 100644
--- a/arch/arm/mach-mx3/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -77,4 +77,3 @@
return 0;
}
-
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index fa5288018..5911281 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -32,7 +32,6 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/hardware.h>
-#include <mach/spi.h>
#include <mach/audmux.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 6269053..f9ef04a 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <video/platform_lcd.h>
@@ -32,9 +31,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mx25.h>
-#include <mach/imx-uart.h>
#include <mach/audmux.h>
-#include <mach/esdhc.h>
#include "devices-imx25.h"
@@ -208,23 +205,14 @@
},
};
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+ eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
-static struct platform_device eukrea_mbimxsd_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &eukrea_mbimxsd_button_data,
- }
-};
-
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
- &eukrea_mbimxsd_button_device,
&eukrea_mbimxsd_lcd_powerdev,
};
@@ -299,4 +287,5 @@
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
similarity index 91%
rename from arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 2e288b3..4909ea0 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <video/platform_lcd.h>
#include <linux/i2c.h>
@@ -38,15 +37,10 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
#include <mach/audmux.h>
-#include <mach/esdhc.h>
#include "devices-imx35.h"
-#include "devices.h"
static const struct fb_videomode fb_modedb[] = {
{
@@ -101,12 +95,11 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CMO-QVGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -223,23 +216,14 @@
},
};
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+ eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
-static struct platform_device eukrea_mbimxsd_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &eukrea_mbimxsd_button_data,
- }
-};
-
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
- &eukrea_mbimxsd_button_device,
&eukrea_mbimxsd_lcd_powerdev,
};
@@ -292,8 +276,8 @@
#endif
imx35_add_imx_uart1(&uart_pdata);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
@@ -315,4 +299,5 @@
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
similarity index 100%
rename from arch/arm/mach-mx3/iomux-imx31.c
rename to arch/arm/mach-imx/iomux-imx31.c
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
new file mode 100644
index 0000000..15e45c8
--- /dev/null
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+ /* UART1 */
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+ /* UART2 */
+ PB28_PF_UART2_CTS,
+ PB29_PF_UART2_RTS,
+ PB30_PF_UART2_TXD,
+ PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &apf9328_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+ {
+ .start = MX1_CS4_PHYS + 0x00C00000,
+ .end = MX1_CS4_PHYS + 0x00C00001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_CS4_PHYS + 0x00C00002,
+ .end = MX1_CS4_PHYS + 0x00C00003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIOB(14),
+ .end = IRQ_GPIOB(14),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &dm9000_setup,
+ }
+};
+
+/* --- SERIAL RESSOURCE --- */
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+ .flags = 0,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &apf9328_flash_device,
+ &dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+ mxc_gpio_setup_multiple_pins(apf9328_pins,
+ ARRAY_SIZE(apf9328_pins),
+ "APF9328");
+
+ imx1_add_imx_uart0(&uart0_pdata);
+ imx1_add_imx_uart1(&uart1_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+ mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+ .init = apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+ /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
+ .map_io = mx1_map_io,
+ .init_early = imx1_init_early,
+ .init_irq = mx1_init_irq,
+ .timer = &apf9328_timer,
+ .init_machine = apf9328_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
similarity index 95%
rename from arch/arm/mach-mx3/mach-armadillo5x0.c
rename to arch/arm/mach-imx/mach-armadillo5x0.c
index 226829b..ffb40ff 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -34,7 +34,6 @@
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/input.h>
-#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -49,13 +48,10 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
static int armadillo5x0_pins[] = {
/* UART1 */
@@ -280,20 +276,12 @@
}
};
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
+static const struct gpio_keys_platform_data
+ armadillo5x0_button_data __initconst = {
.buttons = armadillo5x0_buttons,
.nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
};
-static struct platform_device armadillo5x0_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &armadillo5x0_button_data,
- }
-};
-
/*
* NAND Flash
*/
@@ -383,12 +371,11 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -496,7 +483,6 @@
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
- &armadillo5x0_button_device,
};
/*
@@ -508,6 +494,7 @@
ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
/* Register UART */
@@ -521,8 +508,8 @@
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
mxc_register_device(&armadillo5x0_nor_flash,
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
similarity index 98%
rename from arch/arm/mach-mx3/mach-bug.c
rename to arch/arm/mach-imx/mach-bug.c
index d137d70..42e4f07 100644
--- a/arch/arm/mach-mx3/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -20,7 +20,6 @@
#include <linux/platform_device.h>
#include <mach/iomux-mx3.h>
-#include <mach/imx-uart.h>
#include <mach/hardware.h>
#include <mach/common.h>
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 759299b..46a2e41 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -38,7 +38,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
similarity index 98%
rename from arch/arm/mach-mx3/mach-cpuimx35.c
rename to arch/arm/mach-imx/mach-cpuimx35.c
index ec63d99..3f8ef82 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -41,10 +41,8 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/mxc_nand.h>
#include "devices-imx35.h"
-#include "devices.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 9da8d18..148cff2 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -36,8 +36,6 @@
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
#include <mach/iomux-mx25.h>
#include "devices-imx25.h"
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index d7e0d21..7ae43b1 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -27,7 +27,6 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -130,19 +129,12 @@
}
};
-static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+ visstrim_gpio_keys_platform_data __initconst = {
.buttons = visstrim_gpio_keys,
.nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
};
-static struct platform_device visstrim_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &visstrim_gpio_keys_platform_data,
- },
-};
-
/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
static int visstrim_m10_sdhc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
@@ -186,7 +178,6 @@
};
static struct platform_device *platform_devices[] __initdata = {
- &visstrim_gpio_keys_device,
&visstrim_m10_nor_mtd_device,
};
@@ -255,6 +246,7 @@
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
+ imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-kzm_arm11_01.c
rename to arch/arm/mach-imx/mach-kzm_arm11_01.c
index d35621d..1ecae20 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -39,7 +39,6 @@
#include <mach/iomux-mx3.h>
#include "devices-imx31.h"
-#include "devices.h"
#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 47cf56a..38ec5cb 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -25,7 +25,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
#include <mach/iomux-mx1.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index fa52a10..74ac889 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -25,7 +25,6 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/iomux-mx21.h>
-#include <mach/mxc_nand.h>
#include "devices-imx21.h"
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 06da438..58ea3fd 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -29,7 +29,6 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
#include <linux/usb/otg.h>
#include <mach/hardware.h>
@@ -103,6 +102,8 @@
MX25_PAD_SD1_DATA1__SD1_DATA1,
MX25_PAD_SD1_DATA2__SD1_DATA2,
MX25_PAD_SD1_DATA3__SD1_DATA3,
+ MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
+ MX25_PAD_A15__GPIO_2_1, /* CardDetect */
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
@@ -208,6 +209,14 @@
.bitrate = 100000,
};
+#define SD1_GPIO_WP IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_CD IMX_GPIO_NR(2, 1)
+
+static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
+ .wp_gpio = SD1_GPIO_WP,
+ .cd_gpio = SD1_GPIO_CD,
+};
+
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -225,7 +234,7 @@
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx_keypad(&mx25pdk_keymap_data);
- imx25_add_sdhci_esdhc_imx(0, NULL);
+ imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
}
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 367d1e4..1db7950 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -29,7 +29,6 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
similarity index 96%
rename from arch/arm/mach-mx3/mach-mx31_3ds.c
rename to arch/arm/mach-imx/mach-mx31_3ds.c
index 034be62..9b98244 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -39,13 +39,8 @@
#include <mach/iomux-mx3.h>
#include <mach/3ds_debugboard.h>
#include <mach/ulpi.h>
-#include <mach/mmc.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
#include "devices-imx31.h"
-#include "devices.h"
/* CPLD IRQ line for external uart, external ethernet etc */
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
@@ -178,22 +173,37 @@
{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
};
-static int __init mx31_3ds_camera_alloc_dma(void)
+static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
+ .flags = MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 2600,
+};
+
+static int __init mx31_3ds_init_camera(void)
{
- int dma;
+ int dma, ret = -ENOMEM;
+ struct platform_device *pdev =
+ imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
+
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
if (!mx3_camera_base)
- return -ENOMEM;
+ goto err;
- dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma = dma_declare_coherent_memory(&pdev->dev,
mx3_camera_base, mx3_camera_base,
MX31_3DS_CAMERA_BUF_SIZE,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
if (!(dma & DMA_MEMORY_MAP))
- return -ENOMEM;
+ goto err;
- return 0;
+ ret = platform_device_add(pdev);
+ if (ret)
+err:
+ platform_device_put(pdev);
+
+ return ret;
}
static int mx31_3ds_camera_power(struct device *dev, int on)
@@ -241,12 +251,6 @@
},
};
-struct mx3_camera_pdata mx31_3ds_camera_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .flags = MX3_CAMERA_DATAWIDTH_10,
- .mclk_10khz = 2600,
-};
-
/*
* FB support
*/
@@ -273,8 +277,7 @@
.irq_base = MXC_IPU_IRQ_START,
};
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Epson-VGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -723,8 +726,8 @@
imx31_add_mxc_mmc(0, &sdhc1_pdata);
imx31_add_spi_imx0(&spi0_pdata);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
/* Camera power: default - off */
@@ -735,10 +738,7 @@
iclink_ov2640.power = NULL;
}
- if (!mx31_3ds_camera_alloc_dma())
- mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
- else
- pr_err("Failed to allocate dma memory for camera");
+ mx31_3ds_init_camera();
}
static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-mx31ads.c
rename to arch/arm/mach-imx/mach-mx31ads.c
index 3d095d6..f4dee02 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -38,7 +38,6 @@
#endif
#include "devices-imx31.h"
-#include "devices.h"
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-mx31lilly.c
rename to arch/arm/mach-imx/mach-mx31lilly.c
index ed95745..410e676 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -46,7 +46,6 @@
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
/*
* This file contains module-specific initialization routines for LILLY-1131.
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-mx31lite.c
rename to arch/arm/mach-imx/mach-mx31lite.c
index 24a21a3..ac9b4ca 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -44,7 +44,6 @@
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
/*
* This file contains the module-specific initialization routines.
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
similarity index 91%
rename from arch/arm/mach-mx3/mach-mx31moboard.c
rename to arch/arm/mach-imx/mach-mx31moboard.c
index 3a021b0..eaa51e4 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -27,6 +27,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
+#include <linux/memblock.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -39,13 +40,9 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/spi.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
static unsigned int moboard_pins[] = {
/* UART0 */
@@ -102,7 +99,7 @@
};
static struct physmap_flash_data mx31moboard_flash_data = {
- .width = 2,
+ .width = 2,
};
static struct resource mx31moboard_flash_resource = {
@@ -194,8 +191,8 @@
static struct regulator_consumer_supply cam_consumers[] = {
{
- .dev = &mx3_camera.dev,
- .supply = "cam_vcc",
+ .dev_name = "mx3_camera.0",
+ .supply = "cam_vcc",
},
};
@@ -430,9 +427,9 @@
static struct gpio_led mx31moboard_leds[] = {
{
- .name = "coreboard-led-0:red:running",
+ .name = "coreboard-led-0:red:running",
.default_trigger = "heartbeat",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
}, {
.name = "coreboard-led-1:red",
.gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
@@ -446,7 +443,7 @@
};
static struct gpio_led_platform_data mx31moboard_led_pdata = {
- .num_leds = ARRAY_SIZE(mx31moboard_leds),
+ .num_leds = ARRAY_SIZE(mx31moboard_leds),
.leds = mx31moboard_leds,
};
@@ -458,7 +455,7 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
@@ -467,37 +464,39 @@
&mx31moboard_leds_device,
};
-static struct mx3_camera_pdata camera_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3_camera_pdata camera_pdata __initdata = {
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 4800,
};
-#define CAMERA_BUF_SIZE (4*1024*1024)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+static int __init mx31moboard_init_cam(void)
{
- dma_addr_t dma_handle;
- void *buf;
- int dma;
+ int dma, ret = -ENOMEM;
+ struct platform_device *pdev;
- if (buf_size < 2 * 1024 * 1024)
- return -EINVAL;
+ imx31_add_ipu_core(&mx3_ipu_data);
- buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
- return -ENOMEM;
- }
+ pdev = imx31_alloc_mx3_camera(&camera_pdata);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
- memset(buf, 0, buf_size);
-
- dma = dma_declare_coherent_memory(&mx3_camera.dev,
- dma_handle, dma_handle, buf_size,
+ dma = dma_declare_coherent_memory(&pdev->dev,
+ mx3_camera_base, mx3_camera_base,
+ MX3_CAMERA_BUF_SIZE,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+ if (!(dma & DMA_MEMORY_MAP))
+ goto err;
- /* The way we call dma_declare_coherent_memory only a malloc can fail */
- return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+ ret = platform_device_add(pdev);
+ if (ret)
+err:
+ platform_device_put(pdev);
+
+ return ret;
+
}
static int mx31moboard_baseboard;
@@ -529,9 +528,7 @@
imx31_add_mxc_mmc(0, &sdhc1_pdata);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
- mxc_register_device(&mx3_camera, &camera_pdata);
+ mx31moboard_init_cam();
usb_xcvr_reset();
@@ -565,9 +562,19 @@
.init = mx31moboard_timer_init,
};
+static void __init mx31moboard_reserve(void)
+{
+ /* reserve 4 MiB for mx3-camera */
+ mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+ MX3_CAMERA_BUF_SIZE);
+ memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+ memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
.boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-mx35_3ds.c
rename to arch/arm/mach-imx/mach-mx35_3ds.c
index ff5fe23..882880a 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -42,7 +42,6 @@
#include <mach/3ds_debugboard.h>
#include "devices-imx35.h"
-#include "devices.h"
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 69787c3..2774541 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -29,7 +29,6 @@
#include <asm/mach/map.h>
#include <linux/gpio.h>
#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
#include <linux/i2c/pca953x.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 63e1825..bbddc5a 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -37,7 +37,6 @@
#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
#include <mach/audmux.h>
-#include <mach/mxc_nand.h>
#include <mach/irqs.h>
#include <mach/ulpi.h>
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
similarity index 93%
rename from arch/arm/mach-mx3/mach-pcm037.c
rename to arch/arm/mach-imx/mach-pcm037.c
index f07d3bd..89c213b 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -31,6 +31,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/gfp.h>
+#include <linux/memblock.h>
#include <media/soc_camera.h>
@@ -41,13 +42,9 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
#include "pcm037.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
@@ -404,35 +401,35 @@
.exit = pcm970_sdhc1_exit,
};
-struct mx3_camera_pdata camera_pdata = {
- .dma_dev = &mx3_ipu.dev,
+struct mx3_camera_pdata camera_pdata __initdata = {
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 2000,
};
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
+
+static int __init pcm037_init_camera(void)
{
- dma_addr_t dma_handle;
- void *buf;
- int dma;
+ int dma, ret = -ENOMEM;
+ struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
- if (buf_size < 2 * 1024 * 1024)
- return -EINVAL;
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
- buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
- return -ENOMEM;
- }
-
- memset(buf, 0, buf_size);
-
- dma = dma_declare_coherent_memory(&mx3_camera.dev,
- dma_handle, dma_handle, buf_size,
+ dma = dma_declare_coherent_memory(&pdev->dev,
+ mx3_camera_base, mx3_camera_base,
+ MX3_CAMERA_BUF_SIZE,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+ if (!(dma & DMA_MEMORY_MAP))
+ goto err;
- /* The way we call dma_declare_coherent_memory only a malloc can fail */
- return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+ ret = platform_device_add(pdev);
+ if (ret)
+err:
+ platform_device_put(pdev);
+
+ return ret;
}
static struct platform_device *devices[] __initdata = {
@@ -442,7 +439,7 @@
&pcm037_mt9v022,
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
@@ -500,7 +497,6 @@
};
static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
.name = "Sharp-LQ035Q7DH06-QVGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -638,8 +634,8 @@
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_mxc_mmc(0, &sdhc_pdata);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
/* Camera power: default - off */
@@ -649,8 +645,7 @@
else
iclink_mt9t031.power = NULL;
- if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
- mxc_register_device(&mx3_camera, &camera_pdata);
+ pcm037_init_camera();
platform_device_register(&pcm970_sja1000);
@@ -680,9 +675,19 @@
.init = pcm037_timer_init,
};
+static void __init pcm037_reserve(void)
+{
+ /* reserve 4 MiB for mx3-camera */
+ mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+ MX3_CAMERA_BUF_SIZE);
+ memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+ memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
.boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .reserve = pcm037_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
similarity index 91%
rename from arch/arm/mach-mx3/mach-pcm037_eet.c
rename to arch/arm/mach-imx/mach-pcm037_eet.c
index df6fb07..1b7606b 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -7,19 +7,16 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
-#include <mach/spi.h>
#include <asm/mach-types.h>
#include "pcm037.h"
-#include "devices.h"
#include "devices-imx31.h"
static unsigned int pcm037_eet_pins[] = {
@@ -156,20 +153,13 @@
},
};
-static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+ pcm037_gpio_keys_platform_data __initconst = {
.buttons = pcm037_gpio_keys,
.nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
.rep = 0, /* No auto-repeat */
};
-static struct platform_device pcm037_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &pcm037_gpio_keys_platform_data,
- },
-};
-
static int __init eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
@@ -182,9 +172,8 @@
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
imx31_add_spi_imx0(&pcm037_spi1_pdata);
- platform_device_register(&pcm037_gpio_keys_device);
+ imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
return 0;
}
-
late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 4cbce6d..853bb87 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -36,7 +36,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
similarity index 96%
rename from arch/arm/mach-mx3/mach-pcm043.c
rename to arch/arm/mach-imx/mach-pcm043.c
index 036ba1a..0264416 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -36,14 +36,10 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
-#include <mach/esdhc.h>
#include "devices-imx35.h"
-#include "devices.h"
static const struct fb_videomode fb_modedb[] = {
{
@@ -81,12 +77,11 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Sharp-LQ035Q7",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -127,12 +122,12 @@
};
static struct i2c_board_info pcm043_i2c_devices[] = {
- {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
I2C_BOARD_INFO("pcf8563", 0x51),
- }
+ },
};
static struct platform_device *devices[] __initdata = {
@@ -390,8 +385,8 @@
imx35_add_imx_i2c0(&pcm043_i2c0_data);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
similarity index 95%
rename from arch/arm/mach-mx3/mach-qong.c
rename to arch/arm/mach-imx/mach-qong.c
index 17f758b..c163287 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -33,24 +33,23 @@
#include <mach/iomux-mx3.h>
#include "devices-imx31.h"
-#include "devices.h"
/* FPGA defines */
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE (1 << 24)
+#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 0x10
+#define QONG_FPGA_CTRL_SIZE 0x10
/* FPGA control registers */
#define QONG_FPGA_CTRL_VERSION 0x00
#define QONG_DNET_ID 1
#define QONG_DNET_BASEADDR \
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 0x00001000
+#define QONG_DNET_SIZE 0x00001000
#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
@@ -166,15 +165,15 @@
.options = 0,
},
.ctrl = {
- .cmd_ctrl = qong_nand_cmd_ctrl,
+ .cmd_ctrl = qong_nand_cmd_ctrl,
.dev_ready = qong_nand_device_ready,
.select_chip = qong_nand_select_chip,
}
};
static struct resource qong_nand_resource = {
- .start = MX31_CS3_BASE_ADDR,
- .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
similarity index 93%
rename from arch/arm/mach-mx3/mach-vpr200.c
rename to arch/arm/mach-imx/mach-vpr200.c
index 47a69cb..d74e347 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -32,16 +32,12 @@
#include <mach/common.h>
#include <mach/iomux-mx35.h>
#include <mach/irqs.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/mfd/mc13xxx.h>
-#include <linux/gpio_keys.h>
#include "devices-imx35.h"
-#include "devices.h"
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
@@ -91,12 +87,11 @@
}
};
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "PT0708048",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
@@ -141,18 +136,12 @@
{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
};
-static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+static const struct gpio_keys_platform_data
+ vpr200_gpio_keys_data __initconst = {
.buttons = vpr200_gpio_keys_table,
.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
};
-static struct platform_device vpr200_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &vpr200_gpio_keys_data,
- }
-};
-
static struct mc13xxx_platform_data vpr200_pmic = {
.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
@@ -271,7 +260,6 @@
static struct platform_device *devices[] __initdata = {
&vpr200_flash,
- &vpr200_device_gpiokeys,
};
/*
@@ -283,6 +271,7 @@
imx35_add_fec(NULL);
imx35_add_imx2_wdt(NULL);
+ imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -299,8 +288,8 @@
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_mxc_ehci_hs(&usb_host_pdata);
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
new file mode 100644
index 0000000..86b9b45
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx31_io_desc[] __initdata = {
+ imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+ mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
+}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
new file mode 100644
index 0000000..c880e6d
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+void __init mx35_init_irq(void)
+{
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+ mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
+}
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
similarity index 95%
rename from arch/arm/mach-mx3/mx31lilly-db.c
rename to arch/arm/mach-imx/mx31lilly-db.c
index 8f1a38e..7d26f76 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -34,11 +34,8 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
-#include <mach/mx3fb.h>
-#include <mach/ipu.h>
#include "devices-imx31.h"
-#include "devices.h"
/*
* This file contains board-specific initialization routines for the
@@ -164,13 +161,13 @@
};
/* Framebuffer support */
-static struct ipu_platform_data ipu_data __initdata = {
+static const struct ipu_platform_data ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
static const struct fb_videomode fb_modedb = {
/* 640x480 TFT panel (IPS-056T) */
- .name = "CRT-VGA",
+ .name = "CRT-VGA",
.refresh = 64,
.xres = 640,
.yres = 480,
@@ -187,7 +184,6 @@
};
static struct mx3fb_platform_data fb_pdata __initdata = {
- .dma_dev = &mx3_ipu.dev,
.name = "CRT-VGA",
.mode = &fb_modedb,
.num_modes = 1,
@@ -202,8 +198,8 @@
return;
}
- mxc_register_device(&mx3_ipu, &ipu_data);
- mxc_register_device(&mx3_fb, &fb_pdata);
+ imx31_add_ipu_core(&ipu_data);
+ imx31_add_mx3_sdc_fb(&fb_pdata);
gpio_direction_output(LCD_VCC_EN_GPIO, 1);
}
@@ -218,4 +214,3 @@
imx31_add_mxc_mmc(0, &mmc_pdata);
mx31lilly_init_fb();
}
-
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
similarity index 98%
rename from arch/arm/mach-mx3/mx31lite-db.c
rename to arch/arm/mach-imx/mx31lite-db.c
index 3124ea8..5aa053e 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -37,7 +37,6 @@
#include <mach/board-mx31lite.h>
#include "devices-imx31.h"
-#include "devices.h"
/*
* This file contains board-specific initialization routines for the
@@ -200,5 +199,5 @@
imx31_add_spi_imx0(&spi0_pdata);
platform_device_register(&litekit_led_device);
imx31_add_imx2_wdt(NULL);
- mxc_register_device(&imx_rtc_device0, NULL);
+ imx31_add_mxc_rtc(NULL);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
similarity index 99%
rename from arch/arm/mach-mx3/mx31moboard-devboard.c
rename to arch/arm/mach-imx/mx31moboard-devboard.c
index 6410b9c..0aa2536 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -28,7 +28,6 @@
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "devices.h"
static unsigned int devboard_pins[] = {
/* UART1 */
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
similarity index 99%
rename from arch/arm/mach-mx3/mx31moboard-marxbot.c
rename to arch/arm/mach-imx/mx31moboard-marxbot.c
index 57f7b00..bb639cb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -26,14 +26,12 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
#include "devices-imx31.h"
-#include "devices.h"
static unsigned int marxbot_pins[] = {
/* SDHC2 */
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
similarity index 99%
rename from arch/arm/mach-mx3/mx31moboard-smartbot.c
rename to arch/arm/mach-imx/mx31moboard-smartbot.c
index 35f806e..fabb801 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -32,7 +32,6 @@
#include <media/soc_camera.h>
#include "devices-imx31.h"
-#include "devices.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-imx/pcm037.h
similarity index 100%
rename from arch/arm/mach-mx3/pcm037.h
rename to arch/arm/mach-imx/pcm037.h
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
deleted file mode 100644
index 340809a..0000000
--- a/arch/arm/mach-mx3/Kconfig
+++ /dev/null
@@ -1,257 +0,0 @@
-if ARCH_MX3
-
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
-config ARCH_MX31
- bool
-
-config ARCH_MX35
- bool
-
-config SOC_IMX31
- bool
- select IMX_HAVE_PLATFORM_MXC_RNGA
- select ARCH_MXC_AUDMUX_V2
- select ARCH_MX31
- select MXC_AVIC
-
-config SOC_IMX35
- bool
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select HAVE_EPIT
- select ARCH_MX35
- select MXC_AVIC
-
-comment "MX3 platforms:"
-
-config MACH_MX31ADS
- bool "Support MX31ADS platforms"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- default y
- help
- Include support for MX31ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
- bool "Support Wolfson Microelectronics 1133-EV1 module"
- depends on MACH_MX31ADS
- depends on MFD_WM8350_I2C
- depends on REGULATOR_WM8350
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8352_CONFIG_MODE_0
- help
- Include support for the Wolfson Microelectronics 1133-EV1 PMU
- and audio module for the MX31ADS platform.
-
-config MACH_PCM037
- bool "Support Phytec pcm037 (i.MX31) platforms"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select MXC_ULPI if USB_ULPI
- help
- Include support for Phytec pcm037 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
- bool "Support pcm037 EET board extensions"
- depends on MACH_PCM037
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Add support for PCM037 EET baseboard extensions. If you are using the
- OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
- command-line parameter.
-
-config MACH_MX31LITE
- bool "Support MX31 LITEKIT (LogicPD)"
- select SOC_IMX31
- select MXC_ULPI if USB_ULPI
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX31 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS
- bool "Support MX31PDK (3DS)"
- select SOC_IMX31
- select MXC_DEBUG_BOARD
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for MX31PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
- bool "Make the MXC NAND driver use the in flash Bad Block Table"
- depends on MACH_MX31_3DS
- depends on MTD_NAND_MXC
- help
- Enable this if you want that the MXC NAND driver uses the in flash
- Bad Block Table to know what blocks are bad instead of scanning the
- entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
- bool "Support mx31moboard platforms (EPFL Mobots group)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for mx31moboard platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31LILLY
- bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for mx31 based LILLY1131 modules. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_QONG
- bool "Support Dave/DENX QongEVB-LITE platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- help
- Include support for Dave/DENX QongEVB-LITE platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM043
- bool "Support Phytec pcm043 (i.MX35) platforms"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for Phytec pcm043 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
- bool "Support Atmark Armadillo-500 Development Base Board"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select MXC_ULPI if USB_ULPI
- help
- Include support for Atmark Armadillo-500 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
- bool "Support MX35PDK platform"
- select SOC_IMX35
- select MXC_DEBUG_BOARD
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX35PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
- bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- help
- Include support for KZM-ARM11-01. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_BUG
- bool "Support Buglabs BUGBase platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- default y
- help
- Include support for BUGBase 1.3 platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX35
- bool "Support Eukrea CPUIMX35 Platform"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for Eukrea CPUIMX35 platform. This includes
- specific configurations for the board and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
- default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_IMX_SSI
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_VPR200
- bool "Support VPR200 platform"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for VPR200 platform. This includes specific
- configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
deleted file mode 100644
index a54faf2..0000000
--- a/arch/arm/mach-mx3/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG) += mach-qong.o
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG) += mach-bug.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot
deleted file mode 100644
index e1dd366..0000000
--- a/arch/arm/mach-mx3/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
deleted file mode 100644
index b6672db..0000000
--- a/arch/arm/mach-mx3/devices.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-#include <mach/mx3_camera.h>
-
-#include "devices.h"
-
-/* i.MX31 Image Processing Unit */
-
-/* The resource order is important! */
-static struct resource mx3_ipu_rsrc[] = {
- {
- .start = MX3x_IPU_CTRL_BASE_ADDR,
- .end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
- .end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX3x_INT_IPU_SYN,
- .end = MX3x_INT_IPU_SYN,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MX3x_INT_IPU_ERR,
- .end = MX3x_INT_IPU_ERR,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mx3_ipu = {
- .name = "ipu-core",
- .id = -1,
- .num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
- .resource = mx3_ipu_rsrc,
-};
-
-static struct resource fb_resources[] = {
- {
- .start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
- .end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mx3_fb = {
- .name = "mx3_sdc_fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(fb_resources),
- .resource = fb_resources,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource camera_resources[] = {
- {
- .start = MX3x_IPU_CTRL_BASE_ADDR + 0x60,
- .end = MX3x_IPU_CTRL_BASE_ADDR + 0x87,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mx3_camera = {
- .name = "mx3-camera",
- .id = 0,
- .num_resources = ARRAY_SIZE(camera_resources),
- .resource = camera_resources,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource imx_rtc_resources[] = {
- {
- .start = MX31_RTC_BASE_ADDR,
- .end = MX31_RTC_BASE_ADDR + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX31_INT_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_rtc_device0 = {
- .name = "mxc_rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(imx_rtc_resources),
- .resource = imx_rtc_resources,
-};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
deleted file mode 100644
index 121962c..0000000
--- a/arch/arm/mach-mx3/devices.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern struct platform_device mx3_ipu;
-extern struct platform_device mx3_fb;
-extern struct platform_device mx3_camera;
-extern struct platform_device imx_rtc_device0;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
deleted file mode 100644
index 54d7174..0000000
--- a/arch/arm/mach-mx3/mm.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_SOC_IMX31
-static struct map_desc mx31_io_desc[] __initdata = {
- imx_map_entry(MX31, X_MEMC, MT_DEVICE),
- imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
- iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx31_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
-void __init mx31_init_irq(void)
-{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
- mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-static struct map_desc mx35_io_desc[] __initdata = {
- imx_map_entry(MX35, X_MEMC, MT_DEVICE),
- imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx35_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
-void __init mx35_init_irq(void)
-{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
- mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_CACHE_L2X0
-static int mxc_init_l2x0(void)
-{
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
- return 0;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
- return 0;
-}
-
-arch_initcall(mxc_init_l2x0);
-#endif
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 159340d..799fbc4 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,11 +1,11 @@
-if ARCH_MX5
-# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
+if ARCH_MX503 || ARCH_MX51
+# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
# image. So for most time, SOC_IMX50/51/53 should be used.
-config ARCH_MX50
+config ARCH_MX5
bool
-config ARCH_MX51
+config ARCH_MX50
bool
config ARCH_MX53
@@ -13,27 +13,54 @@
config SOC_IMX50
bool
+ select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
+ select ARCH_MX5
select ARCH_MX50
config SOC_IMX51
bool
+ select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
- select ARCH_MX51
+ select ARCH_MX5
config SOC_IMX53
bool
+ select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
+ select ARCH_MX5
select ARCH_MX53
-comment "MX5 platforms:"
+if ARCH_MX50_SUPPORTED
+#comment "i.MX50 machines:"
+
+config MACH_MX50_RDP
+ bool "Support MX50 reference design platform"
+ depends on BROKEN
+ select SOC_IMX50
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select IMX_HAVE_PLATFORM_FEC
+ help
+ Include support for MX50 reference design platform (RDP) board. This
+ includes specific configurations for the board and its peripherals.
+
+endif # ARCH_MX50_SUPPORTED
+
+if ARCH_MX51
+comment "i.MX51 machines:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
@@ -136,6 +163,11 @@
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
+endif # ARCH_MX51
+
+if ARCH_MX53_SUPPORTED
+comment "i.MX53 machines:"
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
@@ -154,6 +186,7 @@
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX53 SMD platform. This includes specific
configurations for the board and its peripherals.
@@ -170,17 +203,6 @@
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
-config MACH_MX50_RDP
- bool "Support MX50 reference design platform"
- depends on BROKEN
- select SOC_IMX50
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select IMX_HAVE_PLATFORM_FEC
- help
- Include support for MX50 reference design platform (RDP) board. This
- includes specific configurations for the board and its peripherals.
+endif # ARCH_MX53_SUPPORTED
endif
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index d0296a9..4efa02e 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -23,13 +23,11 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/fsl_devices.h>
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 29b1808..5ef25a5 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -23,7 +23,6 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/fsl_devices.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
@@ -32,7 +31,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index dedf7f2..11210e1 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -23,7 +23,6 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/fsl_devices.h>
#include <mach/common.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index bea4e41..c7b3fab 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -16,9 +16,6 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/fsl_devices.h>
-#include <linux/fec.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
@@ -26,7 +23,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -208,18 +204,16 @@
{
int ret;
- /* Bring USB hub out of reset */
- ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
+ /* Reset USB hub */
+ ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
+ GPIOF_OUT_INIT_LOW, "GPIO1_7");
if (ret) {
printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
return;
}
- gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
- /* USB HUB RESET - De-assert USB HUB RESET_N */
- msleep(1);
- gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
- msleep(1);
+ msleep(2);
+ /* Deassert reset */
gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
}
@@ -361,7 +355,7 @@
/* Set the PAD settings for the pwr key. */
mxc_iomux_v3_setup_pad(power_key);
- imx51_add_gpio_keys(&imx_button_data);
+ imx_add_gpio_keys(&imx_button_data);
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index acab191..6e36231 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13892.h>
@@ -32,8 +31,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -252,7 +249,7 @@
}
platform_device_register(&mx51_efikamx_leds_device);
- imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+ imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
if (system_rev == 0x11) {
gpio_request(EFIKAMX_RESET1_1, "reset");
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index db04ce84..474fc6e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13892.h>
@@ -35,8 +34,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -260,7 +257,7 @@
imx51_add_sdhci_esdhc_imx(1, NULL);
platform_device_register(&mx51_efikasb_leds_device);
- imx51_add_gpio_keys(&mx51_efikasb_keys_data);
+ imx_add_gpio_keys(&mx51_efikasb_keys_data);
}
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 2af3f43..f87d571 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -21,7 +21,6 @@
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/spi/flash.h>
@@ -31,7 +30,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 6206b11..1b947e8 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -20,13 +20,11 @@
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 31e1732..817c089 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -20,13 +20,11 @@
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#include <asm/mach-types.h>
@@ -52,6 +50,31 @@
/* I2C1 */
MX53_PAD_CSI0_DAT8__I2C1_SDA,
MX53_PAD_CSI0_DAT9__I2C1_SCL,
+ /* SD1 */
+ MX53_PAD_SD1_CMD__ESDHC1_CMD,
+ MX53_PAD_SD1_CLK__ESDHC1_CLK,
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* SD2 */
+ MX53_PAD_SD2_CMD__ESDHC2_CMD,
+ MX53_PAD_SD2_CLK__ESDHC2_CLK,
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
+ /* SD3 */
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK,
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
};
static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
@@ -97,6 +120,9 @@
imx53_add_fec(&mx53_smd_fec_data);
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
+ imx53_add_sdhci_esdhc_imx(0, NULL);
+ imx53_add_sdhci_esdhc_imx(1, NULL);
+ imx53_add_sdhci_esdhc_imx(2, NULL);
}
static void __init mx53_smd_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index fdbc05e..6b89c1b 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1563,6 +1563,7 @@
clk_enable(&iim_clk);
mx53_revision();
clk_disable(&iim_clk);
+ mx53_display_revision();
/* Set SDHC parents to be PLL2 */
clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 472bdfa..86f87da 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -166,6 +166,29 @@
}
EXPORT_SYMBOL(mx50_revision);
+void mx53_display_revision(void)
+{
+ int rev;
+ char *srev;
+ rev = mx53_revision();
+
+ switch (rev) {
+ case IMX_CHIP_REVISION_1_0:
+ srev = IMX_CHIP_REVISION_1_0_STRING;
+ break;
+ case IMX_CHIP_REVISION_2_0:
+ srev = IMX_CHIP_REVISION_2_0_STRING;
+ break;
+ case IMX_CHIP_REVISION_2_1:
+ srev = IMX_CHIP_REVISION_2_1_STRING;
+ break;
+ default:
+ srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+ }
+ printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx53_display_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h
index c9e4282..7216667 100644
--- a/arch/arm/mach-mx5/devices-imx50.h
+++ b/arch/arm/mach-mx5/devices-imx50.h
@@ -21,14 +21,14 @@
#include <mach/mx50.h>
#include <mach/devices-common.h>
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
#define imx50_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-extern const struct imx_fec_data imx50_fec_data __initconst;
+extern const struct imx_fec_data imx50_fec_data;
#define imx50_add_fec(pdata) \
imx_add_fec(&imx50_fec_data, pdata)
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
#define imx50_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 7fff485..e11bc0e 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -9,49 +9,46 @@
#include <mach/mx51.h>
#include <mach/devices-common.h>
-extern const struct imx_fec_data imx51_fec_data __initconst;
+extern const struct imx_fec_data imx51_fec_data;
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)
-#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
#define imx51_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
#define imx51_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
#define imx51_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-extern const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
#define imx51_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+extern const struct imx_spi_imx_data imx51_cspi_data;
#define imx51_add_cspi(pdata) \
imx_add_spi_imx(&imx51_cspi_data, pdata)
-extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx51_ecspi_data[];
#define imx51_add_ecspi(id, pdata) \
imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
#define imx51_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
+extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
#define imx51_add_mxc_pwm(id) \
imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
#define imx51_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 9251008..48f4c8c 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -8,28 +8,27 @@
#include <mach/mx53.h>
#include <mach/devices-common.h>
-extern const struct imx_fec_data imx53_fec_data __initconst;
+extern const struct imx_fec_data imx53_fec_data;
#define imx53_add_fec(pdata) \
imx_add_fec(&imx53_fec_data, pdata)
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
#define imx53_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
#define imx53_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-extern const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
#define imx53_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx53_ecspi_data[];
#define imx53_add_ecspi(id, pdata) \
imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
#define imx53_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 4a85505..97292d2 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -18,13 +18,11 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/fsl_devices.h>
#include <linux/i2c/tsc2007.h>
#include <linux/leds.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index e6c1119..31c871e 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -27,7 +27,6 @@
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
@@ -38,7 +37,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
#include <mach/audmux.h>
@@ -108,23 +106,14 @@
},
};
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+ eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
-static struct platform_device eukrea_mbimxsd_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &eukrea_mbimxsd_button_data,
- }
-};
-
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
- &eukrea_mbimxsd_button_device,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -166,4 +155,5 @@
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index d0c7075..56739c2 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -20,7 +20,6 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13892.h>
@@ -30,8 +29,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
deleted file mode 100644
index 8e5fa38..0000000
--- a/arch/arm/mach-mxc91231/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_MXC91231
-
-comment "MXC91231 platforms:"
-
-config MACH_MAGX_ZN5
- bool "Support Motorola Zn5 GSM phone"
- default n
- help
- Include support for Motorola Zn5 GSM phone.
-
-endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
deleted file mode 100644
index 011d5e1..0000000
--- a/arch/arm/mach-mxc91231/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-y := mm.o clock.o devices.o system.o iomux.o
-obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
deleted file mode 100644
index 9939a19..0000000
--- a/arch/arm/mach-mxc91231/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x90008000
-params_phys-y := 0x90000100
-initrd_phys-y := 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
deleted file mode 100644
index 9fab505..0000000
--- a/arch/arm/mach-mxc91231/clock.c
+++ /dev/null
@@ -1,640 +0,0 @@
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/bug.h>
-#include <asm/div64.h>
-
-#include "crm_regs.h"
-
-#define CRM_SMALL_DIVIDER(base, name) \
- crm_small_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK)
-#define CRM_1DIVIDER(base, name) \
- crm_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK, 1)
-#define CRM_16DIVIDER(base, name) \
- crm_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK, 16)
-
-static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
-{
- static const u32 crm_small_dividers[] = {
- 2, 3, 4, 5, 6, 8, 10, 12
- };
- u8 idx;
-
- idx = (__raw_readl(reg) & mask) >> offset;
- if (idx > 7)
- return 1;
-
- return crm_small_dividers[idx];
-}
-
-static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
-{
- u32 div;
- div = (__raw_readl(reg) & mask) >> offset;
- return div ? div : z;
-}
-
-static int _clk_1bit_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_1bit_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_3bit_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 0x7 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_3bit_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(0x7 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
-{
- return 2 * clk_get_rate(clk->parent);
-}
-
-static struct clk ckih_x2_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_ckih_x2_get_rate,
-};
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
- .get_rate = clk_ckil_get_rate,
-};
-
-/* plls stuff */
-static struct clk mcu_pll_clk;
-static struct clk dsp_pll_clk;
-static struct clk usb_pll_clk;
-
-static struct clk *pll_clk(u8 sel)
-{
- switch (sel) {
- case 0:
- return &mcu_pll_clk;
- case 1:
- return &dsp_pll_clk;
- case 2:
- return &usb_pll_clk;
- }
- BUG();
-}
-
-static void __iomem *pll_base(struct clk *clk)
-{
- if (clk == &mcu_pll_clk)
- return MXC_PLL0_BASE;
- else if (clk == &dsp_pll_clk)
- return MXC_PLL1_BASE;
- else if (clk == &usb_pll_clk)
- return MXC_PLL2_BASE;
- BUG();
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
- const void __iomem *pllbase;
- unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
- long mfn, mfn_abs, mfd, pdf;
- s64 temp;
- pllbase = pll_base(clk);
-
- pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
-
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
- mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
-
- if (mfn < 0)
- mfn_abs = -mfn;
- else
- mfn_abs = mfn;
-
-/* XXX: actually this asumes that ckih is fed to pll, but spec says
- * that ckih_x2 is also possible. need to check this out.
- */
- ref_clk = clk_get_rate(&ckih_clk);
-
- ref_clk *= 2;
- ref_clk /= pdf + 1;
-
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd);
- if (mfn < 0)
- temp = -temp;
- temp += ref_clk * mfi;
-
- return temp;
-}
-
-static int clk_pll_enable(struct clk *clk)
-{
- void __iomem *ctl;
- u32 reg;
-
- ctl = pll_base(clk);
- reg = __raw_readl(ctl);
- reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
- __raw_writel(reg, ctl);
- do {
- reg = __raw_readl(ctl);
- } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
- return 0;
-}
-
-static void clk_pll_disable(struct clk *clk)
-{
- void __iomem *ctl;
- u32 reg;
-
- ctl = pll_base(clk);
- reg = __raw_readl(ctl);
- reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
- __raw_writel(reg, ctl);
-}
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-
-static struct clk dsp_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-/* plls stuff end */
-
-/* ap_ref_clk stuff */
-static struct clk ap_ref_clk;
-
-static unsigned long clk_ap_ref_get_rate(struct clk *clk)
-{
- u32 ascsr, acsr;
- u8 ap_pat_ref_div_2, ap_isel, acs, ads;
-
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
- acsr = __raw_readl(MXC_CRMAP_ACSR);
-
- /* 0 for ckih, 1 for ckih*2 */
- ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
- /* reg divider */
- ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
- /* undocumented, 1 for disabling divider */
- ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
- /* 0 for pat_ref, 1 for divider out */
- acs = acsr & MXC_CRMAP_ACSR_ACS;
-
- if (acs & !ads)
- /* use divided clock */
- return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
-
- return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
-}
-
-static struct clk ap_ref_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_ap_ref_get_rate,
-};
-/* ap_ref_clk stuff end */
-
-/* ap_pre_dfs_clk stuff */
-static struct clk ap_pre_dfs_clk;
-
-static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
-{
- u32 acsr, ascsr;
-
- acsr = __raw_readl(MXC_CRMAP_ACSR);
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
- if (acsr & MXC_CRMAP_ACSR_ACS) {
- u8 sel;
- sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
- MXC_CRMAP_ASCSR_APSEL_OFFSET;
- return clk_get_rate(pll_clk(sel)) /
- CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
- }
- return clk_get_rate(&ap_ref_clk);
-}
-
-static struct clk ap_pre_dfs_clk = {
- .get_rate = clk_ap_pre_dfs_get_rate,
-};
-/* ap_pre_dfs_clk stuff end */
-
-/* usb_clk stuff */
-static struct clk usb_clk;
-
-static struct clk *clk_usb_parent(struct clk *clk)
-{
- u32 acsr, ascsr;
-
- acsr = __raw_readl(MXC_CRMAP_ACSR);
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
- if (acsr & MXC_CRMAP_ACSR_ACS) {
- u8 sel;
- sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
- MXC_CRMAP_ASCSR_USBSEL_OFFSET;
- return pll_clk(sel);
- }
- return &ap_ref_clk;
-}
-
-static unsigned long clk_usb_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
-}
-
-static struct clk usb_clk = {
- .enable_reg = MXC_CRMAP_ACDER2,
- .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
- .get_rate = clk_usb_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
-};
-/* usb_clk stuff end */
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
-}
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
-}
-
-static struct clk ipg_clk = {
- .parent = &ap_pre_dfs_clk,
- .get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ahb_clk = {
- .parent = &ap_pre_dfs_clk,
- .get_rate = clk_ahb_get_rate,
-};
-
-/* perclk_clk stuff */
-static struct clk perclk_clk;
-
-static unsigned long clk_perclk_get_rate(struct clk *clk)
-{
- u32 acder2;
-
- acder2 = __raw_readl(MXC_CRMAP_ACDER2);
- if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
- return 2 * clk_get_rate(clk->parent);
-
- return clk_get_rate(clk->parent);
-}
-
-static struct clk perclk_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_perclk_get_rate,
-};
-/* perclk_clk stuff end */
-
-/* uart_clk stuff */
-static struct clk uart_clk[];
-
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
- u32 div;
-
- switch (clk->id) {
- case 0:
- case 1:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
- break;
- case 2:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
- break;
- default:
- BUG();
- }
- return clk_get_rate(clk->parent) / div;
-}
-
-static struct clk uart_clk[] = {
- {
- .id = 0,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- }, {
- .id = 1,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- }, {
- .id = 2,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- },
-};
-/* uart_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk nfc_clk;
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
-}
-
-static struct clk nfc_clk = {
- .parent = &ahb_clk,
- .enable_reg = MXC_CRMAP_ACDER2,
- .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
- .get_rate = clk_nfc_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
-};
-/* sdhc_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk sdhc_clk[];
-
-static struct clk *clk_sdhc_parent(struct clk *clk)
-{
- u32 aprb;
- u8 sel;
- u32 mask;
- int offset;
-
- aprb = __raw_readl(MXC_CRMAP_APRB);
-
- switch (clk->id) {
- case 0:
- mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
- offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
- break;
- case 1:
- mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
- offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
- break;
- default:
- BUG();
- }
- sel = (aprb & mask) >> offset;
-
- switch (sel) {
- case 0:
- return &ckih_clk;
- case 1:
- return &ckih_x2_clk;
- }
- return &usb_clk;
-}
-
-static unsigned long clk_sdhc_get_rate(struct clk *clk)
-{
- u32 div;
-
- switch (clk->id) {
- case 0:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
- break;
- case 1:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
- break;
- default:
- BUG();
- }
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int clk_sdhc_enable(struct clk *clk)
-{
- u32 amlpmre1, aprb;
-
- amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
- aprb = __raw_readl(MXC_CRMAP_APRB);
- switch (clk->id) {
- case 0:
- amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
- aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
- break;
- case 1:
- amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
- aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
- break;
- }
- __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
- __raw_writel(aprb, MXC_CRMAP_APRB);
- return 0;
-}
-
-static void clk_sdhc_disable(struct clk *clk)
-{
- u32 amlpmre1, aprb;
-
- amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
- aprb = __raw_readl(MXC_CRMAP_APRB);
- switch (clk->id) {
- case 0:
- amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
- aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
- break;
- case 1:
- amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
- aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
- break;
- }
- __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
- __raw_writel(aprb, MXC_CRMAP_APRB);
-}
-
-static struct clk sdhc_clk[] = {
- {
- .id = 0,
- .get_rate = clk_sdhc_get_rate,
- .enable = clk_sdhc_enable,
- .disable = clk_sdhc_disable,
- }, {
- .id = 1,
- .get_rate = clk_sdhc_get_rate,
- .enable = clk_sdhc_enable,
- .disable = clk_sdhc_disable,
- },
-};
-/* sdhc_clk stuff end */
-
-/* wdog_clk stuff */
-static struct clk wdog_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRD,
- .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRD,
- .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- },
-};
-/* wdog_clk stuff end */
-
-/* gpt_clk stuff */
-static struct clk gpt_clk = {
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRC,
- .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
-};
-/* gpt_clk stuff end */
-
-/* cspi_clk stuff */
-static struct clk cspi_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRE2,
- .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRE1,
- .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- },
-};
-/* cspi_clk stuff end */
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
- _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
- _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
- _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
-};
-
-int __init mxc91231_clocks_init(unsigned long fref)
-{
- void __iomem *gpt_base;
-
- ckih_rate = fref;
-
- usb_clk.parent = clk_usb_parent(&usb_clk);
- sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
- sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
- mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
-
- return 0;
-}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
deleted file mode 100644
index b989bac..0000000
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor, Inc.
- * Copyright 2006-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-
-#define CKIL_CLK_FREQ 32768
-
-#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
-#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
-#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
-#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
-#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
-#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
-#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK 0xF
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0
-#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF
-
-/* CRM AP Register Offsets */
-#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00)
-#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04)
-#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08)
-#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C)
-#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10)
-#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14)
-#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18)
-#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C)
-#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20)
-#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24)
-#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28)
-#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C)
-#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30)
-#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34)
-#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38)
-#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C)
-#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40)
-#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44)
-#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48)
-#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C)
-#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50)
-#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54)
-#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58)
-#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C)
-#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60)
-#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64)
-#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68)
-
-/* CRM AP Register Bit definitions */
-#define MXC_CRMAP_ASCSR_CRS 0x10000
-#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000
-#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13
-#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13)
-#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11
-#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11)
-#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7
-#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7)
-#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5
-#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5)
-#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3
-#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3)
-#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4
-#define MXC_CRMAP_ASCSR_APISEL 0x1
-
-#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8
-#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4
-#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4)
-#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0
-#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF
-
-#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30
-#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24
-#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24)
-#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14
-#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8
-#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8)
-#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6
-#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0
-#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F
-
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24)
-#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20
-#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16
-#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16)
-#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12
-#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8
-#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5)
-#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0
-#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF
-
-#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22
-#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19
-#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12
-#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9
-#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6
-#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3
-#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3)
-
-#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0
-#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28
-#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22
-#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16
-#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12
-#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9
-#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6
-#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3
-#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0
-#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22
-#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12
-#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9
-#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6
-#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0
-#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28
-#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25
-#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25)
-#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22
-#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19
-#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16
-#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12
-#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9
-#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6
-#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3
-#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0
-#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0
-#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19
-#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16
-#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9
-#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6
-#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3
-#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0
-#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0)
-
-#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28
-#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22
-#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19
-#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16
-#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12
-#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9
-#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6
-#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3
-#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0
-#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7
-
-#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20
-#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20)
-
-#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29
-#define MXC_CRMAP_APRA_SIMEN_OFFSET 24
-#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17
-#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17)
-#define MXC_CRMAP_APRA_UART3EN_OFFSET 16
-#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14
-#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13
-#define MXC_CRMAP_APRA_UART2EN_OFFSET 8
-#define MXC_CRMAP_APRA_UART1EN_OFFSET 0
-
-#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13
-#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13)
-#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9
-#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9)
-#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8
-#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5
-#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5)
-#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1
-#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1)
-#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0
-
-#define MXC_CRMAP_ACSR_ADS_OFFSET 8
-#define MXC_CRMAP_ACSR_ADS (0x1 << 8)
-#define MXC_CRMAP_ACSR_ACS 0x1
-
-#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8)
-#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8)
-#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8)
-#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8)
-#define MXC_CRMAP_ADCR_LFDF_OFFSET 8
-#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8)
-#define MXC_CRMAP_ADCR_ALT_PLL 0x80
-#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20
-#define MXC_CRMAP_ADCR_DIV_BYP 0x2
-#define MXC_CRMAP_ADCR_VSTAT 0x8
-#define MXC_CRMAP_ADCR_TSTAT 0x10
-#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10
-#define MXC_CRMAP_ADCR_CLK_ON 0x40
-
-#define MXC_CRMAP_ADFMR_FC_OFFSET 16
-#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16)
-#define MXC_CRMAP_ADFMR_MF_OFFSET 1
-#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1)
-#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1
-#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000
-
-#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18)
-#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16)
-#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12)
-#define MXC_CRMAP_ACR_CKOHD (1 << 11)
-#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8
-#define MXC_CRMAP_ACR_CKOD (1 << 7)
-#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4)
-
-/* AP Warm reset */
-#define MXC_CRMAP_AMCR_SW_AP (1 << 14)
-
-/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
-#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001
-#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003
-#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007
-#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008
-#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018
-#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038
-#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040
-#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0
-#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0
-#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200
-#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600
-#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00
-#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000
-#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000
-#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000
-#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000
-#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000
-#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000
-#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000
-#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000
-#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000
-#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000
-
-#define NUM_GATE_CTRL 6
-
-/* CRM COM Register Offsets */
-#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C)
-#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10)
-
-/* CRM COM Bit Definitions */
-#define MXC_CRMCOM_CSCR_PPD1 0x08000000
-#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18)
-#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17)
-#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8
-#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8)
-#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0
-#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3
-
-/* DSM Register Offsets */
-#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c)
-#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20)
-#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24)
-#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28)
-#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40)
-#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44)
-#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c)
-#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50)
-
-/* Bit definitions of various registers in DSM */
-#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008
-#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004
-#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002
-#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000
-#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003
-#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200
-#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001
-#define MXC_DSM_CONTROL0_RESTART 0x00000010
-/* Counter Block reset */
-#define MXC_DSM_CONTROL1_CB_RST 0x00000002
-/* State Machine reset */
-#define MXC_DSM_CONTROL1_SM_RST 0x00000004
-/* Bit needed to reset counter block */
-#define MXC_CONTROL1_RST_CNT32 0x00000008
-#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800
-#define MXC_DSM_CONTROL1_SLEEP 0x00000100
-#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000
-#define MXC_DSM_CTREN_CNT32 0x00000001
-
-/* Magic Fix enable bit */
-#define MXC_DSM_MGPER_EN_MGFX 0x80000000
-#define MXC_DSM_MGPER_PER_MASK 0x000003FF
-#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n)
-
-/* Address offsets of the CLKCTL registers */
-#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00)
-#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04)
-#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08)
-
-#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
deleted file mode 100644
index 027af4f..0000000
--- a/arch/arm/mach-mxc91231/devices.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-
-static struct resource uart0[] = {
- {
- .start = MXC91231_UART1_BASE_ADDR,
- .end = MXC91231_UART1_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART1_RX,
- .end = MXC91231_INT_UART1_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART1_TX,
- .end = MXC91231_INT_UART1_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART1_MINT,
- .end = MXC91231_INT_UART1_MINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = MXC91231_UART2_BASE_ADDR,
- .end = MXC91231_UART2_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART2_RX,
- .end = MXC91231_INT_UART2_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART2_TX,
- .end = MXC91231_INT_UART2_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART2_MINT,
- .end = MXC91231_INT_UART2_MINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = MXC91231_UART3_BASE_ADDR,
- .end = MXC91231_UART3_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART3_RX,
- .end = MXC91231_INT_UART3_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART3_TX,
- .end = MXC91231_INT_UART3_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART3_MINT,
- .end = MXC91231_INT_UART3_MINT,
- .flags = IORESOURCE_IRQ,
-
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port mxc_gpio_ports[] = {
- [0] = {
- .chip.label = "gpio-0",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO1,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
- .chip.label = "gpio-1",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO2,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
- .chip.label = "gpio-2",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO3,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- },
- [3] = {
- .chip.label = "gpio-3",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
- .irq = MXC91231_INT_GPIO4,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- },
-};
-
-int __init mxc91231_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
-static struct resource mxc_nand_resources[] = {
- {
- .start = MXC91231_NFC_BASE_ADDR,
- .end = MXC91231_NFC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
- }, {
- .start = MXC91231_INT_NANDFC,
- .end = MXC91231_INT_NANDFC,
- .flags = IORESOURCE_IRQ
- },
-};
-
-struct platform_device mxc_nand_device = {
- .name = "mxc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_nand_resources),
- .resource = mxc_nand_resources,
-};
-
-static struct resource mxc_sdhc0_resources[] = {
- {
- .start = MXC91231_MMC_SDHC1_BASE_ADDR,
- .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_MMC_SDHC1,
- .end = MXC91231_INT_MMC_SDHC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource mxc_sdhc1_resources[] = {
- {
- .start = MXC91231_MMC_SDHC2_BASE_ADDR,
- .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_MMC_SDHC2,
- .end = MXC91231_INT_MMC_SDHC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_sdhc_device0 = {
- .name = "mxc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
- .resource = mxc_sdhc0_resources,
-};
-
-struct platform_device mxc_sdhc_device1 = {
- .name = "mxc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
- .resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_cspi0_resources[] = {
- {
- .start = MXC91231_CSPI1_BASE_ADDR,
- .end = MXC91231_CSPI1_BASE_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_CSPI1,
- .end = MXC91231_INT_CSPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_cspi_device0 = {
- .name = "spi_imx",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_cspi0_resources),
- .resource = mxc_cspi0_resources,
-};
-
-static struct resource mxc_cspi1_resources[] = {
- {
- .start = MXC91231_CSPI2_BASE_ADDR,
- .end = MXC91231_CSPI2_BASE_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_CSPI2,
- .end = MXC91231_INT_CSPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_cspi_device1 = {
- .name = "spi_imx",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_cspi1_resources),
- .resource = mxc_cspi1_resources,
-};
-
-static struct resource mxc_wdog0_resources[] = {
- {
- .start = MXC91231_WDOG1_BASE_ADDR,
- .end = MXC91231_WDOG1_BASE_ADDR + 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_wdog_device0 = {
- .name = "mxc-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_wdog0_resources),
- .resource = mxc_wdog0_resources,
-};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
deleted file mode 100644
index 72a2136..0000000
--- a/arch/arm/mach-mxc91231/devices.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-
-extern struct platform_device mxc_nand_device;
-
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-
-extern struct platform_device mxc_cspi_device0;
-extern struct platform_device mxc_cspi_device1;
-
-extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
deleted file mode 100644
index 66fc41c..0000000
--- a/arch/arm/mach-mxc91231/iomux.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mxc91231.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
-#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
-#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000)
-#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000)
-#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200)
-
-#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600)
-#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define NB_PORTS ((PIN_MAX + 32) / 32)
-#define PIN_GLOBAL_NUM(pin) \
- (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \
- ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \
- ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 side, field, l, mode, ret = 0;
- void __iomem *reg;
-
- side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
- switch (side) {
- case MUX_SIDE_AP:
- reg = IOMUXSW_AP_MUX_CTL;
- break;
- case MUX_SIDE_SP:
- reg = IOMUXSW_SP_MUX_CTL;
- break;
- default:
- return -EINVAL;
- }
- reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
- field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
- mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 padgrp, field, l;
- void __iomem *reg;
-
- padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
-{
- unsigned pad = PIN_GLOBAL_NUM(pin_mode);
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin_mode);
-
- return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label)
-{
- const unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin_mode)
-{
- unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
- const unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
deleted file mode 100644
index f31a45e..0000000
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mxc91231.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
-};
-
-static void __init zn5_init(void)
-{
- pm_power_off = mxc91231_power_off;
-
- mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
- mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
-
- mxc_register_device(&mxc_wdog_device0, NULL);
-
- return;
-}
-
-static void __init zn5_timer_init(void)
-{
- mxc91231_clocks_init(26000000); /* 26mhz ckih */
-}
-
-struct sys_timer zn5_timer = {
- .init = zn5_timer_init,
-};
-
-MACHINE_START(MAGX_ZN5, "Motorola Zn5")
- .boot_params = MXC91231_PHYS_OFFSET + 0x100,
- .map_io = mxc91231_map_io,
- .init_early = mxc91231_init_early,
- .init_irq = mxc91231_init_irq,
- .timer = &zn5_timer,
- .init_machine = zn5_init,
-MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
deleted file mode 100644
index a77f6da..0000000
--- a/arch/arm/mach-mxc91231/mm.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MXC specific definitions
- * Copyright 2006 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/*
- * This structure defines the MXC memory map.
- */
-static struct map_desc mxc91231_io_desc[] __initdata = {
- imx_map_entry(MXC91231, L2CC, MT_DEVICE),
- imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
- imx_map_entry(MXC91231, ROMP, MT_DEVICE),
- imx_map_entry(MXC91231, AVIC, MT_DEVICE),
- imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
- imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
- imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
- imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory map for
- * the IO modules.
- */
-void __init mxc91231_map_io(void)
-{
- iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
-}
-
-void __init mxc91231_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MXC91231);
-}
-
-int mxc91231_register_gpios(void);
-
-void __init mxc91231_init_irq(void)
-{
- mxc91231_register_gpios();
- mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
-}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
deleted file mode 100644
index 736f7ef..0000000
--- a/arch/arm/mach-mxc91231/system.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE (1 << 6)
-#define WDOG_WCR_ASSERT (1 << 5)
-
-void mxc91231_power_off(void)
-{
- u16 wcr;
-
- wcr = __raw_readw(WDOG_WCR);
- wcr |= WDOG_WCR_OUT_ENABLE;
- wcr &= ~WDOG_WCR_ASSERT;
- __raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
- u32 amcr;
-
- /* Reset the AP using CRM */
- amcr = __raw_readl(MXC_CRMAP_AMCR);
- amcr &= ~MXC_CRMAP_AMCR_SW_AP;
- __raw_writel(amcr, MXC_CRMAP_AMCR);
-
- mdelay(10);
- cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
- u32 crm_ctl;
-
- /* Go to WAIT mode after WFI */
- crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
- crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
- crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
- __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4522fbb..21de5d5 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -24,7 +24,6 @@
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
- default y
help
Include support for MX23EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -39,7 +38,6 @@
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_OCOTP
- default y
help
Include support for MX28EVK platform. This includes specific
configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index c3577ea..0163b6d 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -446,6 +446,8 @@
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
+ _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
_REGISTER_CLOCK(NULL, "usb", usb_clk)
_REGISTER_CLOCK(NULL, "audio", audio_clk)
_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index c473edd..79b9452 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -34,7 +34,7 @@
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
-extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
+extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
index eab3a06..79222ec 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
@@ -22,13 +22,14 @@
[_id] = mxs_i2c_data_entry_single(soc, _id)
#ifdef CONFIG_SOC_IMX28
-const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
+const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
mxs_i2c_data_entry(MX28, 0),
mxs_i2c_data_entry(MX28, 1),
};
#endif
-struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data)
+struct platform_device *__init mxs_add_mxs_i2c(
+ const struct mxs_mxs_i2c_data *data)
{
struct resource res[] = {
{
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index c5137f1..7a37469 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -65,13 +65,14 @@
const struct flexcan_platform_data *pdata);
/* i2c */
-struct mxs_i2c_data {
+struct mxs_mxs_i2c_data {
int id;
resource_size_t iobase;
resource_size_t errirq;
resource_size_t dmairq;
};
-struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+struct platform_device * __init mxs_add_mxs_i2c(
+ const struct mxs_mxs_i2c_data *data);
/* mmc */
#include <mach/mmc.h>
diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
index c0a18c2..599094b 100644
--- a/arch/arm/mach-mxs/include/mach/mx23.h
+++ b/arch/arm/mach-mxs/include/mach/mx23.h
@@ -57,7 +57,7 @@
#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000)
#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000)
#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
+#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000)
#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000)
#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000)
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 214e5b6..3c2de33 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -148,7 +148,7 @@
mx23_add_auart0();
/* power on mmc slot by writing 0 to the gpio */
- ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index bb329b9..eacdc6b 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -375,13 +375,13 @@
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
/* power on mmc slot by writing 0 to the gpio */
- ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
- ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+ ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc1-slot-power");
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b0cb425..a5353fc 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -4,13 +4,18 @@
menu "Freescale MXC Implementations"
+config ARCH_MX50_SUPPORTED
+ bool
+
+config ARCH_MX53_SUPPORTED
+ bool
+
choice
prompt "Freescale CPU family:"
default ARCH_MX3
config ARCH_MX1
bool "MX1-based"
- select SOC_IMX1
help
This enables support for systems based on the Freescale i.MX1 family
@@ -26,29 +31,26 @@
config ARCH_MX3
bool "MX3-based"
- select CPU_V6
help
This enables support for systems based on the Freescale i.MX3 family
-config ARCH_MXC91231
- bool "MXC91231-based"
- select CPU_V6
- select MXC_AVIC
+config ARCH_MX503
+ bool "i.MX50 + i.MX53"
+ select ARCH_MX50_SUPPORTED
+ select ARCH_MX53_SUPPORTED
help
- This enables support for systems based on the Freescale MXC91231 family
+ This enables support for machines using Freescale's i.MX50 and i.MX51
+ processors.
-config ARCH_MX5
- bool "MX5-based"
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
+config ARCH_MX51
+ bool "i.MX51"
+ select ARCH_MX51_SUPPORTED
help
This enables support for systems based on the Freescale i.MX51 family
endchoice
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
endmenu
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index b9ab1d5..bd294ad 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -24,7 +24,6 @@
config IMX_HAVE_PLATFORM_IMX_FB
bool
- select HAVE_FB_IMX
config IMX_HAVE_PLATFORM_IMX_I2C
bool
@@ -41,6 +40,9 @@
config IMX_HAVE_PLATFORM_IMX_UDC
bool
+config IMX_HAVE_PLATFORM_IPU_CORE
+ bool
+
config IMX_HAVE_PLATFORM_MX1_CAMERA
bool
@@ -63,6 +65,9 @@
bool
select ARCH_HAS_RNGA
+config IMX_HAVE_PLATFORM_MXC_RTC
+ bool
+
config IMX_HAVE_PLATFORM_MXC_W1
bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 75cd2ec..ad2922a 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
@@ -19,6 +20,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c
new file mode 100644
index 0000000..edf6503
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ipu_core_entry_single(soc) \
+{ \
+ .iobase = soc ## _IPU_CTRL_BASE_ADDR, \
+ .synirq = soc ## _INT_IPU_SYN, \
+ .errirq = soc ## _INT_IPU_ERR, \
+}
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
+ imx_ipu_core_entry_single(MX31);
+#endif
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
+ imx_ipu_core_entry_single(MX35);
+#endif
+
+static struct platform_device *imx_ipu_coredev __initdata;
+
+struct platform_device *__init imx_add_ipu_core(
+ const struct imx_ipu_core_data *data,
+ const struct ipu_platform_data *pdata)
+{
+ /* The resource order is important! */
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + 0x5f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->iobase + 0x88,
+ .end = data->iobase + 0xb3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->synirq,
+ .end = data->synirq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->errirq,
+ .end = data->errirq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_alloc_mx3_camera(
+ const struct imx_ipu_core_data *data,
+ const struct mx3_camera_pdata *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase + 0x60,
+ .end = data->iobase + 0x87,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+ int ret = -ENOMEM;
+ struct platform_device *pdev;
+
+ if (IS_ERR_OR_NULL(imx_ipu_coredev))
+ return ERR_PTR(-ENODEV);
+
+ pdev = platform_device_alloc("mx3-camera", 0);
+ if (!pdev)
+ goto err;
+
+ pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+ if (!pdev->dev.dma_mask)
+ goto err;
+
+ *pdev->dev.dma_mask = DMA_BIT_MASK(32);
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+ if (ret)
+ goto err;
+
+ if (pdata) {
+ struct mx3_camera_pdata *copied_pdata;
+
+ ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (ret) {
+err:
+ kfree(pdev->dev.dma_mask);
+ platform_device_put(pdev);
+ return ERR_PTR(-ENODEV);
+ }
+ copied_pdata = dev_get_platdata(&pdev->dev);
+ copied_pdata->dma_dev = &imx_ipu_coredev->dev;
+ }
+
+ return pdev;
+}
+
+struct platform_device *__init imx_add_mx3_sdc_fb(
+ const struct imx_ipu_core_data *data,
+ struct mx3fb_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase + 0xb4,
+ .end = data->iobase + 0x1bf,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+
+ if (IS_ERR_OR_NULL(imx_ipu_coredev))
+ return ERR_PTR(-ENODEV);
+
+ pdata->dma_dev = &imx_ipu_coredev->dev;
+
+ return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
+ DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
new file mode 100644
index 0000000..16d0ec4
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2010-2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_rtc_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _RTC_BASE_ADDR, \
+ .irq = soc ## _INT_RTC, \
+ }
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
+ imx_mxc_rtc_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+struct platform_device *__init imx_add_mxc_rtc(
+ const struct imx_mxc_rtc_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("mxc_rtc", -1,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index f4a60ab..f97eb36 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -80,7 +80,7 @@
#ifdef CONFIG_SOC_IMX51
const struct imx_spi_imx_data imx51_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
+ imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K);
const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
#define imx51_ecspi_data_entry(_id, _hwid) \
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a22ebe1..da79918 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -23,7 +23,6 @@
extern void mx50_map_io(void);
extern void mx51_map_io(void);
extern void mx53_map_io(void);
-extern void mxc91231_map_io(void);
extern void imx1_init_early(void);
extern void imx21_init_early(void);
extern void imx25_init_early(void);
@@ -33,7 +32,6 @@
extern void imx50_init_early(void);
extern void imx51_init_early(void);
extern void imx53_init_early(void);
-extern void mxc91231_init_early(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
@@ -45,7 +43,6 @@
extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
-extern void mxc91231_init_irq(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -58,14 +55,11 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc91231_power_off(void);
-extern void mxc91231_arch_reset(int, const char *);
-extern void mxc91231_prepare_idle(void);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
+extern int mx53_display_revision(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 3b3a37c..8e8d175 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,13 +44,6 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MXC91231
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
-#define UART_PADDR MXC91231_UART2_BASE_ADDR
-#endif
-
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8658c9c..fa84773 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -166,6 +166,24 @@
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mx3_camera.h>
+struct imx_ipu_core_data {
+ resource_size_t iobase;
+ resource_size_t synirq;
+ resource_size_t errirq;
+};
+struct platform_device *__init imx_add_ipu_core(
+ const struct imx_ipu_core_data *data,
+ const struct ipu_platform_data *pdata);
+struct platform_device *__init imx_alloc_mx3_camera(
+ const struct imx_ipu_core_data *data,
+ const struct mx3_camera_pdata *pdata);
+struct platform_device *__init imx_add_mx3_sdc_fb(
+ const struct imx_ipu_core_data *data,
+ struct mx3fb_platform_data *pdata);
+
#include <mach/mx1_camera.h>
struct imx_mx1_camera_data {
resource_size_t iobase;
@@ -237,6 +255,15 @@
struct platform_device *__init imx_add_mxc_pwm(
const struct imx_mxc_pwm_data *data);
+/* mxc_rtc */
+struct imx_mxc_rtc_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_rtc(
+ const struct imx_mxc_rtc_data *data);
+
+/* mxc_w1 */
struct imx_mxc_w1_data {
resource_size_t iobase;
};
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 26bb1ba..67d3e2b 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -86,15 +86,6 @@
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
- * mxc91231:
- * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
- * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000
- * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000
- * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
- * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000
- * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
@@ -104,6 +95,8 @@
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
+#include <mach/mxc.h>
+
#ifdef CONFIG_ARCH_MX5
#include <mach/mx50.h>
#include <mach/mx51.h>
@@ -134,12 +127,6 @@
# include <mach/mx25.h>
#endif
-#ifdef CONFIG_ARCH_MXC91231
-# include <mach/mxc91231.h>
-#endif
-
-#include <mach/mxc.h>
-
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index b4f2de7..4347a87 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,19 +14,26 @@
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
-#ifdef CONFIG_ARCH_MX3
-#define __arch_ioremap __mx3_ioremap
+#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
+#include <mach/hardware.h>
+
+#define __arch_ioremap __imx_ioremap
#define __arch_iounmap __iounmap
+#define addr_in_module(addr, mod) \
+ ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+
static inline void __iomem *
-__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
- if (mtype == MT_DEVICE) {
- /* Access all peripherals below 0x80000000 as nonshared device
- * but leave l2cc alone.
+ if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
+ /*
+ * Access all peripherals below 0x80000000 as nonshared device
+ * on mx3, but leave l2cc alone. Otherwise cache corruptions
+ * can occur.
*/
- if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) ||
- (phys_addr >= 0x30000000 + SZ_1M)))
+ if (phys_addr < 0x80000000 &&
+ !addr_in_module(phys_addr, MX3x_L2CC))
mtype = MT_DEVICE_NONSHARED;
}
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index d7f52c9..2e5244d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -89,13 +89,16 @@
#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
deleted file mode 100644
index bf28df0..0000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_IOMUX_MXC91231_H__
-#define __MACH_IOMUX_MXC91231_H__
-
-/*
- * various IOMUX output functions
- */
-
-#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
-#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
-#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
-#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
-#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
-#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
-#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
-#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
-#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
-#define IOMUX_ICONFIG_FUNC 2 /* used as function */
-#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
-#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * setups a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label);
-/*
- * setups mutliple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label);
-
-/*
- * releases a single pin:
- * - make it available for a future use by another driver
- * - frees the GPIO if the pin was configured as GPIO
- * - DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin_mode);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-#define MUX_SIDE_AP (0)
-#define MUX_SIDE_SP (1)
-
-#define MUX_SIDE_SHIFT (26)
-#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT)
-
-#define MUX_GPIO_PORT_SHIFT (23)
-#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT)
-
-#define MUX_GPIO_PIN_SHIFT (20)
-#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT)
-
-#define MUX_REG_SHIFT (15)
-#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT)
-
-#define MUX_FIELD_SHIFT (13)
-#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT)
-
-#define MUX_PADGRP_SHIFT (8)
-#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT)
-
-#define MUX_PIN_MASK (0xffffff << 8)
-
-#define GPIO_PORT_MAX (3)
-
-#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
- (((side) << MUX_SIDE_SHIFT) | \
- (gport << MUX_GPIO_PORT_SHIFT) | \
- ((gpin) << MUX_GPIO_PIN_SHIFT) | \
- ((ctlreg) << MUX_REG_SHIFT) | \
- ((ctlfield) << MUX_FIELD_SHIFT) | \
- ((padgrp) << MUX_PADGRP_SHIFT))
-
-#define MUX_MODE_OUT_SHIFT (4)
-#define MUX_MODE_IN_SHIFT (0)
-#define MUX_MODE_SHIFT (0)
-#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT)
-
-#define IOMUX_MODE(pin, mode) \
- (pin | (mode << MUX_MODE_SHIFT))
-
-enum iomux_pins {
- /* AP Side pins */
- MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24),
- MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24),
- MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24),
- MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24),
- MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24),
- MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24),
- MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24),
- MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28),
- MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28),
- MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28),
- MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28),
- MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9),
- MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9),
- MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9),
- MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9),
- MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9),
- MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9),
- MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9),
- MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9),
- MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28),
- MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28),
- MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28),
- MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28),
- MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28),
- MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28),
- MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28),
- MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28),
- MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28),
- MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28),
- MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28),
- MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28),
- MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28),
- MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28),
- MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28),
- MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28),
- MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28),
- MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28),
- MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28),
- MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28),
- MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28),
- MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28),
- MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28),
- MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28),
- MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28),
- MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28),
- MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28),
- MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28),
- MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28),
- MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28),
- MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28),
- MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10),
- MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10),
- MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10),
- MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10),
- MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11),
- MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11),
- MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11),
- MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11),
- MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11),
- MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21),
- MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21),
- MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21),
- MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21),
- MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21),
- MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21),
- MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21),
- MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21),
- MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21),
- MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21),
- MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21),
- MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21),
- MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21),
- MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21),
- MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12),
- MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12),
- MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9),
- MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9),
- MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9),
- MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28),
- MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28),
- MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9),
- MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9),
- MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22),
- MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22),
- MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22),
- MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22),
- MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23),
- MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23),
- MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23),
- MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23),
- MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28),
- MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28),
- MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28),
- MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28),
- MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10),
- MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10),
- MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10),
- MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10),
- MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11),
- MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11),
- MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11),
-
- /* Shared pins */
- MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28),
- MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28),
- MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28),
- MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28),
- MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28),
- MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28),
- MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28),
- MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28),
- MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28),
- MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28),
- MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28),
- MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28),
- MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28),
- MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28),
- MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28),
- MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28),
- MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25),
- MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25),
- MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25),
- MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25),
- MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25),
- MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25),
- MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26),
- MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26),
- MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26),
- MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26),
- MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28),
- MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13),
- MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13),
- MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13),
- MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13),
- MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13),
- MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26),
- MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26),
- MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28),
- MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28),
- MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28),
- MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28),
- MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28),
- MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28),
- MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28),
-};
-
-#define PIN_AP_MAX (104)
-#define PIN_SP_MAX (41)
-
-#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX)
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MXC91231_PIN_(pin name)__(function)
- */
-
-#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
- IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
- IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
- IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
-#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
- IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
-
-
-#endif /* __MACH_IOMUX_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index a3d930d..35c89bc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -35,8 +35,6 @@
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_SOC_IMX51
#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MXC91231
-#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX3
#define MXC_GPIO_IRQS (32 * 3)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 5d51cbb..11be5cd 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -19,7 +19,6 @@
#define MX50_PHYS_OFFSET UL(0x70000000)
#define MX51_PHYS_OFFSET UL(0x90000000)
#define MX53_PHYS_OFFSET UL(0x70000000)
-#define MXC91231_PHYS_OFFSET UL(0x90000000)
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
@@ -32,8 +31,6 @@
# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MXC91231
-# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX50
# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX51
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index cbc43ad..1dc1c52 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -60,8 +60,8 @@
#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
-#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
-#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index ace1786..9d2a1ef 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -337,17 +337,4 @@
#define MX53_INT_GPIO7_LOW 107
#define MX53_INT_GPIO7_HIGH 108
-/* silicon revisions specific to i.MX53 */
-#define MX53_CHIP_REV_1_0 0x10
-#define MX53_CHIP_REV_1_1 0x11
-#define MX53_CHIP_REV_1_2 0x12
-#define MX53_CHIP_REV_1_3 0x13
-#define MX53_CHIP_REV_2_0 0x20
-#define MX53_CHIP_REV_2_1 0x21
-#define MX53_CHIP_REV_2_2 0x22
-#define MX53_CHIP_REV_2_3 0x23
-#define MX53_CHIP_REV_3_0 0x30
-#define MX53_CHIP_REV_3_1 0x31
-#define MX53_CHIP_REV_3_2 0x32
-
#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 1aea818..4ac53ce 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -35,7 +35,6 @@
#define MXC_CPU_MX50 50
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
-#define MXC_CPU_MXC91231 91231
#define IMX_CHIP_REVISION_1_0 0x10
#define IMX_CHIP_REVISION_1_1 0x11
@@ -177,18 +176,6 @@
# define cpu_is_mx53() (0)
#endif
-#ifdef CONFIG_ARCH_MXC91231
-# ifdef mxc_cpu_type
-# undef mxc_cpu_type
-# define mxc_cpu_type __mxc_cpu_type
-# else
-# define mxc_cpu_type MXC_CPU_MXC91231
-# endif
-# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231)
-#else
-# define cpu_is_mxc91231() (0)
-#endif
-
#ifndef __ASSEMBLY__
struct cpu_op {
@@ -207,14 +194,7 @@
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
-#endif
-
-#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
deleted file mode 100644
index 765190f..0000000
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * - Platform specific register memory map
- *
- * Copyright 2005-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_MXC91231_H__
-#define __MACH_MXC91231_H__
-
-/*
- * L2CC
- */
-#define MXC91231_L2CC_BASE_ADDR 0x30000000
-#define MXC91231_L2CC_SIZE SZ_64K
-
-/*
- * AIPS 1
- */
-#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
-#define MXC91231_AIPS1_SIZE SZ_1M
-
-#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
-#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000)
-#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000)
-#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000)
-#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000)
-#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000)
-#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000)
-#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000)
-#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000)
-#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000)
-#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000)
-#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000)
-#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000)
-#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000)
-#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000)
-#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000)
-#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000)
-
-/*
- * AIPS 2
- */
-#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
-#define MXC91231_AIPS2_SIZE SZ_1M
-
-#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
-#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000)
-#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000)
-#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000)
-#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000)
-#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000)
-#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000)
-#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000)
-#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000)
-#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000)
-#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000)
-#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000)
-#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000)
-#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000)
-#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000)
-#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000)
-#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000)
-#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000)
-
-/*
- * SPBA global module 0
- */
-#define MXC91231_SPBA0_BASE_ADDR 0x50000000
-#define MXC91231_SPBA0_SIZE SZ_1M
-
-#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
-#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000)
-#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000)
-#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000)
-#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000)
-#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000)
-#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000)
-#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000)
-#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000)
-#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000)
-#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000)
-#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000)
-#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000)
-#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000)
-#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000)
-#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000)
-#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000)
-#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000)
-#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000)
-#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000)
-
-/*
- * SPBA global module 1
- */
-#define MXC91231_SPBA1_BASE_ADDR 0x52000000
-#define MXC91231_SPBA1_SIZE SZ_1M
-
-#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
-#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000)
-
-/*!
- * Defines for SPBA modules
- */
-#define MXC91231_SPBA_SDHC1 0x04
-#define MXC91231_SPBA_SDHC2 0x08
-#define MXC91231_SPBA_UART3 0x0C
-#define MXC91231_SPBA_CSPI2 0x10
-#define MXC91231_SPBA_SSI2 0x14
-#define MXC91231_SPBA_SIM 0x18
-#define MXC91231_SPBA_IIM 0x1C
-#define MXC91231_SPBA_CTI_SDMA 0x20
-#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24
-#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28
-#define MXC91231_SPBA_CSPI1 0x30
-#define MXC91231_SPBA_MQSPI 0x34
-#define MXC91231_SPBA_EL1T 0x38
-#define MXC91231_SPBA_IOMUX 0x40
-#define MXC91231_SPBA_CRM_COM 0x44
-#define MXC91231_SPBA_CRM_AP 0x48
-#define MXC91231_SPBA_PLL0 0x4C
-#define MXC91231_SPBA_PLL1 0x50
-#define MXC91231_SPBA_PLL2 0x54
-#define MXC91231_SPBA_GPIO4 0x58
-#define MXC91231_SPBA_SAHARA 0x5C
-
-/*
- * ROMP and AVIC
- */
-#define MXC91231_ROMP_BASE_ADDR 0x60000000
-#define MXC91231_ROMP_SIZE SZ_64K
-
-#define MXC91231_AVIC_BASE_ADDR 0x68000000
-#define MXC91231_AVIC_SIZE SZ_64K
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
-#define MXC91231_X_MEMC_SIZE SZ_64K
-
-#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
-#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000)
-#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000)
-#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000)
-#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000)
-
-/*
- * Memory regions and CS
- * CPLD is connected on CS4
- * CS5 is TP1021 or it is not connected
- * */
-#define MXC91231_FB_RAM_BASE_ADDR 0x78000000
-#define MXC91231_FB_RAM_SIZE SZ_256K
-#define MXC91231_CSD0_BASE_ADDR 0x80000000
-#define MXC91231_CSD1_BASE_ADDR 0x90000000
-#define MXC91231_CS0_BASE_ADDR 0xA0000000
-#define MXC91231_CS1_BASE_ADDR 0xA8000000
-#define MXC91231_CS2_BASE_ADDR 0xB0000000
-#define MXC91231_CS3_BASE_ADDR 0xB2000000
-#define MXC91231_CS4_BASE_ADDR 0xB4000000
-#define MXC91231_CS5_BASE_ADDR 0xB6000000
-
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address.
- */
-#define MXC91231_IO_P2V(x) IMX_IO_P2V(x)
-#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#define MXC91231_INT_GPIO3 0
-#define MXC91231_INT_EL1T_CI 1
-#define MXC91231_INT_EL1T_RFCI 2
-#define MXC91231_INT_EL1T_RFI 3
-#define MXC91231_INT_EL1T_MCU 4
-#define MXC91231_INT_EL1T_IPI 5
-#define MXC91231_INT_MU_GEN 6
-#define MXC91231_INT_GPIO4 7
-#define MXC91231_INT_MMC_SDHC2 8
-#define MXC91231_INT_MMC_SDHC1 9
-#define MXC91231_INT_I2C 10
-#define MXC91231_INT_SSI2 11
-#define MXC91231_INT_SSI1 12
-#define MXC91231_INT_CSPI2 13
-#define MXC91231_INT_CSPI1 14
-#define MXC91231_INT_RTIC 15
-#define MXC91231_INT_SAHARA 15
-#define MXC91231_INT_HAC 15
-#define MXC91231_INT_UART3_RX 16
-#define MXC91231_INT_UART3_TX 17
-#define MXC91231_INT_UART3_MINT 18
-#define MXC91231_INT_ECT 19
-#define MXC91231_INT_SIM_IPB 20
-#define MXC91231_INT_SIM_DATA 21
-#define MXC91231_INT_RNGA 22
-#define MXC91231_INT_DSM_AP 23
-#define MXC91231_INT_KPP 24
-#define MXC91231_INT_RTC 25
-#define MXC91231_INT_PWM 26
-#define MXC91231_INT_GEMK_AP 27
-#define MXC91231_INT_EPIT 28
-#define MXC91231_INT_GPT 29
-#define MXC91231_INT_UART2_RX 30
-#define MXC91231_INT_UART2_TX 31
-#define MXC91231_INT_UART2_MINT 32
-#define MXC91231_INT_NANDFC 33
-#define MXC91231_INT_SDMA 34
-#define MXC91231_INT_USB_WAKEUP 35
-#define MXC91231_INT_USB_SOF 36
-#define MXC91231_INT_PMU_EVTMON 37
-#define MXC91231_INT_USB_FUNC 38
-#define MXC91231_INT_USB_DMA 39
-#define MXC91231_INT_USB_CTRL 40
-#define MXC91231_INT_IPU_ERR 41
-#define MXC91231_INT_IPU_SYN 42
-#define MXC91231_INT_UART1_RX 43
-#define MXC91231_INT_UART1_TX 44
-#define MXC91231_INT_UART1_MINT 45
-#define MXC91231_INT_IIM 46
-#define MXC91231_INT_MU_RX_OR 47
-#define MXC91231_INT_MU_TX_OR 48
-#define MXC91231_INT_SCC_SCM 49
-#define MXC91231_INT_SCC_SMN 50
-#define MXC91231_INT_GPIO2 51
-#define MXC91231_INT_GPIO1 52
-#define MXC91231_INT_MQSPI1 53
-#define MXC91231_INT_MQSPI2 54
-#define MXC91231_INT_WDOG2 55
-#define MXC91231_INT_EXT_INT7 56
-#define MXC91231_INT_EXT_INT6 57
-#define MXC91231_INT_EXT_INT5 58
-#define MXC91231_INT_EXT_INT4 59
-#define MXC91231_INT_EXT_INT3 60
-#define MXC91231_INT_EXT_INT2 61
-#define MXC91231_INT_EXT_INT1 62
-#define MXC91231_INT_EXT_INT0 63
-
-#define MXC91231_MAX_INT_LINES 63
-#define MXC91231_MAX_EXT_LINES 8
-
-#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 0417da9..51f02a9 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -24,12 +24,6 @@
static inline void arch_idle(void)
{
-#ifdef CONFIG_ARCH_MXC91231
- if (cpu_is_mxc91231()) {
- /* Need this to set DSM low-power mode */
- mxc91231_prepare_idle();
- }
-#endif
/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
if (cpu_is_mx31() || cpu_is_mx35()) {
unsigned long reg = 0;
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 2d96246..d61d5c7 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,8 +26,6 @@
#define CLOCK_TICK_RATE 16000000
#elif defined CONFIG_ARCH_MX5
#define CLOCK_TICK_RATE 8000000
-#elif defined CONFIG_ARCH_MXC91231
-#define CLOCK_TICK_RATE 13000000
#endif
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 3455fc0..8024f2a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -37,12 +37,6 @@
{
unsigned int wcr_enable;
-#ifdef CONFIG_ARCH_MXC91231
- if (cpu_is_mxc91231()) {
- mxc91231_arch_reset(mode, cmd);
- return;
- }
-#endif
#ifdef CONFIG_MACH_MX51_EFIKAMX
if (machine_is_mx51_efikamx()) {
mx51_efikamx_reset();
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 2237ff8..40f32e7 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -54,7 +54,7 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35, MX25, MXC91231, MX5 */
+/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
#define V2_TCTL_FRR (1 << 9)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e6a8d8c..62f337a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,9 +8,6 @@
config HAVE_FB_ATMEL
bool
-config HAVE_FB_IMX
- bool
-
config SH_MIPI_DSI
tristate
depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -359,7 +356,7 @@
config FB_IMX
tristate "Freescale i.MX LCD support"
- depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
+ depends on FB && IMX_HAVE_PLATFORM_IMX_FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ef72cb4..d2ccfd6 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -65,12 +65,6 @@
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
-#ifdef CONFIG_ARCH_MX1
-#define CPOS_CYP(y) ((y) & 0x1ff)
-#else
-#define CPOS_CYP(y) ((y) & 0x3ff)
-#endif
-
#define LCDC_LCWHB 0x10
#define LCWHB_BK_EN (1<<31)
#define LCWHB_CW(w) (((w) & 0x1f) << 24)
@@ -79,16 +73,6 @@
#define LCDC_LCHCC 0x14
-#ifdef CONFIG_ARCH_MX1
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-#else
-#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
-#endif
-
#define LCDC_PCR 0x18
#define LCDC_HCR 0x1C
@@ -115,11 +99,7 @@
#define LCDC_RMCR 0x34
-#ifdef CONFIG_ARCH_MX1
-#define RMCR_LCDC_EN (1<<1)
-#else
-#define RMCR_LCDC_EN 0
-#endif
+#define RMCR_LCDC_EN_MX1 (1<<1)
#define RMCR_SELF_REF (1<<0)
@@ -536,7 +516,11 @@
writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
fbi->regs + LCDC_CPOS);
- writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
+ /*
+ * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt
+ * on other SoCs
+ */
+ writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
clk_enable(fbi->clk);