Merge branch 'imx/devel' into next/dt
The board changes in the imx/devel branch conflict with other changes in
the device imx/dt branch.
Conflicts:
arch/arm/mach-mx5/board-mx53_loco.c
arch/arm/mach-mx5/board-mx53_smd.c
arch/arm/plat-mxc/include/mach/common.h
arch/arm/plat-mxc/include/mach/memory.h
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 0000000..e2401cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,19 @@
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..52916b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,55 @@
+* ARM Generic Interrupt Controller
+
+ARM SMP cores are often associated with a GIC, providing per processor
+interrupts (PPI), shared processor interrupts (SPI) and software
+generated interrupts (SGI).
+
+Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+Secondary GICs are cascaded into the upward interrupt controller and do not
+have PPIs or SGIs.
+
+Main node required properties:
+
+- compatible : should be one of:
+ "arm,cortex-a9-gic"
+ "arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region is
+ the GIC cpu interface register base and size.
+
+Optional
+- interrupts : Interrupt source of the parent interrupt controller. Only
+ present on secondary GICs.
+
+Example:
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000..d3830a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 0000000..6d62951
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+ - "ti,ivahd" for OMAP4
+ - "ti,iva2.2" for OMAP3
+ - "ti,iva2.1" for OMAP2430
+ - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+ compatible = "ti,ivahd", "ti,iva";
+ ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000..6888a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,19 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+ Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000..1a5a42c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+ Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 0000000..dbdab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,43 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+ form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+ HW documentation, attached to a device. Must contain at least
+ one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+ during suspend.
+
+
+Example:
+
+spinlock@1 {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+ compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+ compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+ compatible = "ti,omap4-panda", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
new file mode 100644
index 0000000..aef383e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
@@ -0,0 +1,27 @@
+* Qualcomm MSM UART
+
+Required properties:
+- compatible :
+ - "qcom,msm-uart", and one of "qcom,msm-hsuart" or
+ "qcom,msm-lsuart".
+- reg : offset and length of the register set for the device
+ for the hsuart operating in compatible mode, there should be a
+ second pair describing the gsbi registers.
+- interrupts : should contain the uart interrupt.
+
+There are two different UART blocks used in MSM devices,
+"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is
+able to handle both of these, and matches against the "qcom,msm-uart"
+as the compatibility.
+
+The registers for the "qcom,msm-hsuart" device need to specify both
+register blocks, even for the common driver.
+
+Example:
+
+ uart@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 854ed5ca..d6e6724 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2706,10 +2706,11 @@
functions are at fixed addresses, they make nice
targets for exploits that can control RIP.
- emulate [default] Vsyscalls turn into traps and are
- emulated reasonably safely.
+ emulate Vsyscalls turn into traps and are emulated
+ reasonably safely.
- native Vsyscalls are native syscall instructions.
+ native [default] Vsyscalls are native syscall
+ instructions.
This is a little bit faster than trapping
and makes a few dynamic recompilers work
better than they would in emulation mode.
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 8ce7c30..fe67b5c 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -27,7 +27,7 @@
of logical flows. Packets for each flow are steered to a separate receive
queue, which in turn can be processed by separate CPUs. This mechanism is
generally known as “Receive-side Scaling” (RSS). The goal of RSS and
-the other scaling techniques to increase performance uniformly.
+the other scaling techniques is to increase performance uniformly.
Multi-queue distribution can also be used for traffic prioritization, but
that is not the focus of these techniques.
@@ -186,10 +186,10 @@
same CPU. Indeed, with many flows and few CPUs, it is very likely that
a single application thread handles flows with many different flow hashes.
-rps_sock_table is a global flow table that contains the *desired* CPU for
-flows: the CPU that is currently processing the flow in userspace. Each
-table value is a CPU index that is updated during calls to recvmsg and
-sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+rps_sock_flow_table is a global flow table that contains the *desired* CPU
+for flows: the CPU that is currently processing the flow in userspace.
+Each table value is a CPU index that is updated during calls to recvmsg
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
and tcp_splice_read()).
When the scheduler moves a thread to a new CPU while it has outstanding
diff --git a/MAINTAINERS b/MAINTAINERS
index ace8f9c..6185d05 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2460,7 +2460,7 @@
F: drivers/infiniband/hw/ehca/
EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
-M: Breno Leitao <leitao@linux.vnet.ibm.com>
+M: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ehea/
@@ -3313,7 +3313,7 @@
L: iommu@lists.linux-foundation.org
T: git git://git.infradead.org/iommu-2.6.git
S: Supported
-F: drivers/pci/intel-iommu.c
+F: drivers/iommu/intel-iommu.c
F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
@@ -6366,10 +6366,10 @@
TEGRA SUPPORT
M: Colin Cross <ccross@android.com>
-M: Erik Gilling <konkers@android.com>
M: Olof Johansson <olof@lixom.net>
+M: Stephen Warren <swarren@nvidia.com>
L: linux-tegra@vger.kernel.org
-T: git git://android.git.kernel.org/kernel/tegra.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
S: Supported
F: arch/arm/mach-tegra
diff --git a/Makefile b/Makefile
index 31f967c..07bc925 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc9
+EXTRAVERSION =
NAME = "Divemaster Edition"
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bf38c8..a94a09b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -29,6 +29,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
+ select CPU_PM if (SUSPEND || CPU_IDLE)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -195,7 +196,8 @@
The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT
- bool "Patch physical to virtual translations at runtime"
+ bool "Patch physical to virtual translations at runtime" if EMBEDDED
+ default y
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
@@ -204,16 +206,25 @@
kernel in system memory.
This can only be used with non-XIP MMU kernels where the base
- of physical memory is at a 16MB boundary, or theoretically 64K
- for the MSM machine class.
+ of physical memory is at a 16MB boundary.
-config ARM_PATCH_PHYS_VIRT_16BIT
- def_bool y
- depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+ Only disable this option if you know that you do not require
+ this feature (eg, building a kernel for a single machine) and
+ you need to shrink the kernel to the minimal size.
+
+config NEED_MACH_MEMORY_H
+ bool
help
- This option extends the physical to virtual translation patching
- to allow physical memory down to a theoretical minimum of 64K
- boundaries.
+ Select this when mach/memory.h is required to provide special
+ definitions for this platform. The need for mach/memory.h should
+ be avoided when possible.
+
+config PHYS_OFFSET
+ hex "Physical address of main memory"
+ depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ help
+ Please provide the physical address corresponding to the
+ location of main memory in your system.
source "init/Kconfig"
@@ -246,6 +257,7 @@
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
+ select NEED_MACH_MEMORY_H
help
Support for ARM's Integrator platform.
@@ -261,6 +273,7 @@
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select NEED_MACH_MEMORY_H
help
This enables support for ARM Ltd RealView boards.
@@ -301,7 +314,6 @@
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
- select ARM_PATCH_PHYS_VIRT if MMU
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@@ -322,6 +334,7 @@
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x based boards.
@@ -362,6 +375,7 @@
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -377,6 +391,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -385,6 +400,7 @@
select CPU_SA110
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -435,6 +451,7 @@
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -465,6 +482,7 @@
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
@@ -474,6 +492,7 @@
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
@@ -567,6 +586,7 @@
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -658,6 +678,7 @@
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select PM_GENERIC_DOMAINS if PM
+ select NEED_MACH_MEMORY_H
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
@@ -672,6 +693,7 @@
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -690,6 +712,7 @@
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
+ select NEED_MACH_MEMORY_H
help
Support for StrongARM 11x0 based boards.
@@ -782,6 +805,7 @@
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
@@ -798,6 +822,7 @@
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung EXYNOS4 series based systems
@@ -809,6 +834,7 @@
select ZONE_DMA
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -836,6 +862,7 @@
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -1408,6 +1435,31 @@
If you don't know what to do here, say Y.
+config ARM_CPU_TOPOLOGY
+ bool "Support cpu topology definition"
+ depends on SMP && CPU_V7
+ default y
+ help
+ Support ARM cpu topology definition. The MPIDR register defines
+ affinity between processors which is then used to describe the cpu
+ topology of an ARM System.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
config HAVE_ARM_SCU
bool
help
@@ -1808,6 +1860,38 @@
endchoice
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
config CMDLINE
string "Default kernel command string"
default ""
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 81cbe40..be3a0f7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -129,4 +129,10 @@
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+config ARM_KPROBES_TEST
+ tristate "Kprobes test module"
+ depends on KPROBES && MODULES
+ help
+ Perform tests of kprobes API and instruction set simulation.
+
endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9260c29..8904caa 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -128,6 +128,9 @@
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
+textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index c602896..e0936a1 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -5,3 +5,12 @@
piggy.lzma
vmlinux
vmlinux.lds
+
+# borrowed libfdt files
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0c74a6f..e4f32a8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -26,6 +26,10 @@
OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
+# string library code (-Os is enforced to keep it much smaller)
+OBJS += string.o
+CFLAGS_string.o := -Os
+
#
# Architecture dependencies
#
@@ -89,21 +93,41 @@
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+# Borrowed libfdt files for the ATAG compatibility mode
+
+libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
+libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h
+
+libfdt_objs := $(addsuffix .o, $(basename $(libfdt)))
+
+$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,shipped)
+
+$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
+ $(addprefix $(obj)/,$(libfdt_hdrs))
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+OBJS += $(libfdt_objs) atags_to_fdt.o
+endif
+
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
-ccflags-y := -fpic -fno-builtin
+ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -123,7 +147,7 @@
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
new file mode 100644
index 0000000..6ce11c4
--- /dev/null
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -0,0 +1,97 @@
+#include <asm/setup.h>
+#include <libfdt.h>
+
+static int node_offset(void *fdt, const char *node_path)
+{
+ int offset = fdt_path_offset(fdt, node_path);
+ if (offset == -FDT_ERR_NOTFOUND)
+ offset = fdt_add_subnode(fdt, 0, node_path);
+ return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+ uint32_t *val_array, int size)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+ const char *property, const char *string)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+ const char *property, uint32_t val)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * REturn values:
+ * = 0 -> pretend success
+ * = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ * < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+ struct tag *atag = atag_list;
+ uint32_t mem_reg_property[2 * NR_BANKS];
+ int memcount = 0;
+ int ret;
+
+ /* make sure we've got an aligned pointer */
+ if ((u32)atag_list & 0x3)
+ return 1;
+
+ /* if we get a DTB here we're done already */
+ if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+ return 0;
+
+ /* validate the ATAG */
+ if (atag->hdr.tag != ATAG_CORE ||
+ (atag->hdr.size != tag_size(tag_core) &&
+ atag->hdr.size != 2))
+ return 1;
+
+ /* let's give it all the room it could need */
+ ret = fdt_open_into(fdt, fdt, total_space);
+ if (ret < 0)
+ return ret;
+
+ for_each_tag(atag, atag_list) {
+ if (atag->hdr.tag == ATAG_CMDLINE) {
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
+ } else if (atag->hdr.tag == ATAG_MEM) {
+ if (memcount >= sizeof(mem_reg_property)/4)
+ continue;
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+ } else if (atag->hdr.tag == ATAG_INITRD2) {
+ uint32_t initrd_start, initrd_size;
+ initrd_start = atag->u.initrd.start;
+ initrd_size = atag->u.initrd.size;
+ setprop_cell(fdt, "/chosen", "linux,initrd-start",
+ initrd_start);
+ setprop_cell(fdt, "/chosen", "linux,initrd-end",
+ initrd_start + initrd_size);
+ }
+ }
+
+ if (memcount)
+ setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+
+ return fdt_pack(fdt);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e95a598..9f5ac11 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -216,6 +216,103 @@
mov r10, r6
#endif
+ mov r5, #0 @ init dtb size to 0
+#ifdef CONFIG_ARM_APPENDED_DTB
+/*
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = final kernel address
+ * r5 = appended dtb size (still unknown)
+ * r6 = _edata
+ * r7 = architecture ID
+ * r8 = atags/device tree pointer
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ *
+ * if there are device trees (dtb) appended to zImage, advance r10 so that the
+ * dtb data will get relocated along with the kernel if necessary.
+ */
+
+ ldr lr, [r6, #0]
+#ifndef __ARMEB__
+ ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
+#else
+ ldr r1, =0xd00dfeed
+#endif
+ cmp lr, r1
+ bne dtb_check_done @ not found
+
+#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
+ /*
+ * OK... Let's do some funky business here.
+ * If we do have a DTB appended to zImage, and we do have
+ * an ATAG list around, we want the later to be translated
+ * and folded into the former here. To be on the safe side,
+ * let's temporarily move the stack away into the malloc
+ * area. No GOT fixup has occurred yet, but none of the
+ * code we're about to call uses any global variable.
+ */
+ add sp, sp, #0x10000
+ stmfd sp!, {r0-r3, ip, lr}
+ mov r0, r8
+ mov r1, r6
+ sub r2, sp, r6
+ bl atags_to_fdt
+
+ /*
+ * If returned value is 1, there is no ATAG at the location
+ * pointed by r8. Try the typical 0x100 offset from start
+ * of RAM and hope for the best.
+ */
+ cmp r0, #1
+ sub r0, r4, #(TEXT_OFFSET - 0x100)
+ mov r1, r6
+ sub r2, sp, r6
+ blne atags_to_fdt
+
+ ldmfd sp!, {r0-r3, ip, lr}
+ sub sp, sp, #0x10000
+#endif
+
+ mov r8, r6 @ use the appended device tree
+
+ /*
+ * Make sure that the DTB doesn't end up in the final
+ * kernel's .bss area. To do so, we adjust the decompressed
+ * kernel size to compensate if that .bss size is larger
+ * than the relocated code.
+ */
+ ldr r5, =_kernel_bss_size
+ adr r1, wont_overwrite
+ sub r1, r6, r1
+ subs r1, r5, r1
+ addhi r9, r9, r1
+
+ /* Get the dtb's size */
+ ldr r5, [r6, #4]
+#ifndef __ARMEB__
+ /* convert r5 (dtb size) to little endian */
+ eor r1, r5, r5, ror #16
+ bic r1, r1, #0x00ff0000
+ mov r5, r5, ror #8
+ eor r5, r5, r1, lsr #8
+#endif
+
+ /* preserve 64-bit alignment */
+ add r5, r5, #7
+ bic r5, r5, #7
+
+ /* relocate some pointers past the appended dtb */
+ add r6, r6, r5
+ add r10, r10, r5
+ add sp, sp, r5
+dtb_check_done:
+#endif
+
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
@@ -223,15 +320,14 @@
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
- * r4 + image length <= current position (pc) -> OK
+ * r4 + image length <= address of wont_overwrite -> OK
*/
add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- ARM( cmp r10, pc )
- THUMB( mov lr, pc )
- THUMB( cmp r10, lr )
+ adr r9, wont_overwrite
+ cmp r10, r9
bls wont_overwrite
/*
@@ -285,14 +381,16 @@
* r2 = BSS start
* r3 = BSS end
* r4 = kernel execution address
+ * r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
* r11 = GOT start
* r12 = GOT end
* sp = stack pointer
*/
- teq r0, #0
+ orrs r1, r0, r5
beq not_relocated
+
add r11, r11, r0
add r12, r12, r0
@@ -307,12 +405,21 @@
/*
* Relocate all entries in the GOT table.
+ * Bump bss entries to _edata + dtb size
*/
1: ldr r1, [r11, #0] @ relocate entries in the GOT
- add r1, r1, r0 @ table. This fixes up the
- str r1, [r11], #4 @ C references.
+ add r1, r1, r0 @ This fixes up C references
+ cmp r1, r2 @ if entry >= bss_start &&
+ cmphs r3, r1 @ bss_end > entry
+ addhi r1, r1, r5 @ entry += dtb size
+ str r1, [r11], #4 @ next entry
cmp r11, r12
blo 1b
+
+ /* bump our bss pointers too */
+ add r2, r2, r5
+ add r3, r3, r5
+
#else
/*
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
new file mode 100644
index 0000000..1f4e718
--- /dev/null
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -0,0 +1,15 @@
+#ifndef _ARM_LIBFDT_ENV_H
+#define _ARM_LIBFDT_ENV_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#define fdt16_to_cpu(x) be16_to_cpu(x)
+#define cpu_to_fdt16(x) cpu_to_be16(x)
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+#endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 832d372..8e2a8fc 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,14 +18,9 @@
unsigned int __machine_arch_type;
-#define _LINUX_STRING_H_
-
#include <linux/compiler.h> /* for inline */
-#include <linux/types.h> /* for size_t */
-#include <linux/stddef.h> /* for NULL */
+#include <linux/types.h>
#include <linux/linkage.h>
-#include <asm/string.h>
-
static void putstr(const char *ptr);
extern void error(char *x);
@@ -101,41 +96,6 @@
flush();
}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i = 0;
- unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
- for (i = __n >> 3; i > 0; i--) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 2) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 1) {
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1)
- *d++ = *s++;
-
- return __dest;
-}
-
/*
* gzip declarations
*/
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
new file mode 100644
index 0000000..36e53ef
--- /dev/null
+++ b/arch/arm/boot/compressed/string.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#include <linux/string.h>
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+ for (i = __n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1)
+ *d++ = *s++;
+
+ return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+ unsigned char *d = __dest;
+ const unsigned char *s = __src;
+
+ if (__dest == __src)
+ return __dest;
+
+ if (__dest < __src)
+ return memcpy(__dest, __src, count);
+
+ while (count--)
+ d[count] = s[count];
+ return __dest;
+}
+
+size_t strlen(const char *s)
+{
+ const char *sc = s;
+
+ while (*sc != '\0')
+ sc++;
+ return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+ int res = 0;
+
+ while (su1 < end) {
+ res = *su1++ - *su2++;
+ if (res)
+ break;
+ }
+ return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+ unsigned char c1, c2;
+ int res = 0;
+
+ do {
+ c1 = *cs++;
+ c2 = *ct++;
+ res = c1 - c2;
+ if (res)
+ break;
+ } while (c1);
+ return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+ const unsigned char *p = s;
+
+ while (count--)
+ if ((unsigned char)c == *p++)
+ return (void *)(p - 1);
+ return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+ while (*s != (char)c)
+ if (*s++ == '\0')
+ return NULL;
+ return (char *)s;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+ char *xs = s;
+ while (count--)
+ *xs++ = c;
+ return s;
+}
+
+void __memzero(void *s, size_t count)
+{
+ memset(s, 0, count);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 4e72883..4919f2a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -51,6 +51,10 @@
_got_start = .;
.got : { *(.got) }
_got_end = .;
+
+ /* ensure the zImage file size is always a multiple of 64 bits */
+ /* (without a dummy byte, ld just ignores the empty section) */
+ .pad : { BYTE(0); . = ALIGN(8); }
_edata = .;
. = BSS_START;
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 0000000..aeef042
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,119 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
new file mode 100644
index 0000000..db6a452
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -0,0 +1,106 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ * applies to AT91SAM9G45, AT91SAM9M10,
+ * AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G45 family SoC";
+ compatible = "atmel,at91sam9g45";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fff98000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff98000 0x200>;
+ interrupts = <10>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
new file mode 100644
index 0000000..85b34f5
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,35 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9M10G45-EK";
+ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart1: serial@fff90000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..f8766af
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+ model = "Freescale i.MX51 Babbage Board";
+ compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ soc {
+ aips@70000000 { /* aips-1 */
+ spba@70000000 {
+ esdhc@70004000 { /* ESDHC1 */
+ fsl,cd-internal;
+ fsl,wp-internal;
+ status = "okay";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ status = "okay";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ fsl,mc13xxx-uses-regulator;
+ };
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc-babbage";
+ reg = <0x73fa8000 0x4000>;
+ };
+
+ uart0: uart@73fbc000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart1: uart@73fc0000 {
+ status = "okay";
+ };
+ };
+
+ aips@80000000 { /* aips-2 */
+ sdma@83fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@83fec000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 21 0>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
new file mode 100644
index 0000000..327ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ tzic: tz-interrupt-controller@e0000000 {
+ compatible = "fsl,imx51-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe0000000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@70000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x10000000>;
+ ranges;
+
+ spba@70000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x40000>;
+ ranges;
+
+ esdhc@70004000 { /* ESDHC1 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x7000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x70010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@70020000 { /* ESDHC3 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@70024000 { /* ESDHC4 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@73f84000 { /* GPIO1 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@73f88000 { /* GPIO2 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@73f8c000 { /* GPIO3 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@73f90000 { /* GPIO4 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@73f9c000 { /* WDOG2 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@73fc0000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+ };
+
+ aips@80000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x10000000>;
+ ranges;
+
+ ecspi@83fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x83fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@83fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+ reg = <0x83fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@83fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 0000000..2ab7f80
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Automotive Reference Design Board";
+ compatible = "fsl,imx53-ard", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
+ wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-ard";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+ };
+ };
+
+ eim-cs1@f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eim-bus", "simple-bus";
+ reg = <0xf4000000 0x3ff0000>;
+ ranges;
+
+ lan9220@f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ linux,code = <102>; /* KEY_HOME */
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ linux,code = <158>; /* KEY_BACK */
+ gpio-key,wakeup;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ linux,code = <362>; /* KEY_PROGRAM */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
new file mode 100644
index 0000000..3f3a881
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Evaluation Kit";
+ compatible = "fsl,imx53-evk", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-evk";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ pmic: mc13892@08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 0000000..ae6de6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ status = "okay";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-qsb";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 0000000..b1c062e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+ compatible = "fsl,imx53-smd", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ status = "okay";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ zigbee: mc1323@0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ fsl,card-wired;
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-smd";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110@0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 0000000..099cd84
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc@50004000 { /* ESDHC1 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@50024000 { /* ESDHC4 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@53f84000 { /* GPIO1 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@53f88000 { /* GPIO2 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@53f8c000 { /* GPIO3 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@53f90000 { /* GPIO4 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@53f9c000 { /* WDOG2 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@53fdc000 { /* GPIO5 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@53fe0000 { /* GPIO6 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@53fe4000 { /* GPIO7 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ i2c@53fec000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ status = "disabled";
+ };
+
+ uart3: uart@53ff0000 { /* UART4 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart4: uart@63f90000 { /* UART5 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ status = "disabled";
+ };
+
+ ecspi@63fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
new file mode 100644
index 0000000..15ded0d
--- /dev/null
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8660 SURF";
+ compatible = "qcom,msm8660-surf", "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@02080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 0000000..9486be6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 0000000..d202bb5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 0000000..c702657
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 0000000..066e28c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 0000000..4c61c82
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+ };
+
+ iva {
+ compatible = "ti,ivahd";
+ ti,hwmods = "iva";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ *
+ * MPU -+-- MPU_PRIVATE - GIC, L2
+ * |
+ * +----------------+----------+
+ * | | |
+ * + +- EMIF - DDR |
+ * | | |
+ * | + +--------+
+ * | | |
+ * | +- L4_ABE - AESS, MCBSP, TIMERs...
+ * | |
+ * +- L3_MAIN --+- L4_CORE - IPs...
+ * |
+ * +- L4_PER - IPs...
+ * |
+ * +- L4_CFG -+- L4_WKUP - IPs...
+ * | |
+ * | +- IPs...
+ * +- IPU ----+
+ * | |
+ * +- DSP ----+
+ * | |
+ * +- DSS ----+
+ *
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 0000000..d66e2c0
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,30 @@
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..74df9ca 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_DOMAIN
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 3227ca9..bf0e134 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -24,10 +24,20 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -71,8 +81,7 @@
static inline unsigned int gic_irq(struct irq_data *d)
{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return d->irq - gic_data->irq_offset;
+ return d->hwirq;
}
/*
@@ -80,7 +89,7 @@
*/
static void gic_mask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
spin_lock(&irq_controller_lock);
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
@@ -91,7 +100,7 @@
static void gic_unmask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
spin_lock(&irq_controller_lock);
if (gic_arch_extn.irq_unmask)
@@ -172,7 +181,7 @@
bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (d->irq % 4) * 8;
+ unsigned int shift = (gic_irq(d) % 4) * 8;
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
@@ -180,7 +189,7 @@
return -EINVAL;
mask = 0xff << shift;
- bit = 1 << (cpu + shift);
+ bit = 1 << (cpu_logical_map(cpu) + shift);
spin_lock(&irq_controller_lock);
val = readl_relaxed(reg) & ~mask;
@@ -223,7 +232,7 @@
if (gic_irq == 1023)
goto out;
- cascade_irq = gic_irq + chip_data->irq_offset;
+ cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
do_bad_IRQ(cascade_irq, desc);
else
@@ -255,28 +264,26 @@
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-static void __init gic_dist_init(struct gic_chip_data *gic,
- unsigned int irq_start)
+static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int gic_irqs, irq_limit, i;
+ unsigned int i, irq;
+ u32 cpumask;
+ unsigned int gic_irqs = gic->gic_irqs;
+ struct irq_domain *domain = &gic->domain;
void __iomem *base = gic->dist_base;
- u32 cpumask = 1 << smp_processor_id();
+ u32 cpu = 0;
+#ifdef CONFIG_SMP
+ cpu = cpu_logical_map(smp_processor_id());
+#endif
+
+ cpumask = 1 << cpu;
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
- * Find out how many interrupts are supported.
- * The GIC only supports up to 1020 interrupt sources.
- */
- gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
- gic_irqs = (gic_irqs + 1) * 32;
- if (gic_irqs > 1020)
- gic_irqs = 1020;
-
- /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -302,19 +309,20 @@
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
- * Limit number of interrupts registered to the platform maximum
- */
- irq_limit = gic->irq_offset + gic_irqs;
- if (WARN_ON(irq_limit > NR_IRQS))
- irq_limit = NR_IRQS;
-
- /*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
- irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
- irq_set_chip_data(i, gic);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ irq_domain_for_each_irq(domain, i, irq) {
+ if (i < 32) {
+ irq_set_percpu_devid(irq);
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_percpu_devid_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
+ } else {
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_fasteoi_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ irq_set_chip_data(irq, gic);
}
writel_relaxed(1, base + GIC_DIST_CTRL);
@@ -343,23 +351,270 @@
writel_relaxed(1, base + GIC_CPU_CTRL);
}
-void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle. Must be called
+ * with interrupts disabled but before powering down the GIC. After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ void __iomem *dist_base;
+ int i;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ gic_data[gic_nr].saved_spi_conf[i] =
+ readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ gic_data[gic_nr].saved_spi_target[i] =
+ readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_enable[i] =
+ readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle. Must be called before enabling interrupts. If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ unsigned int i;
+ void __iomem *dist_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+ dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(0xa0a0a0a0,
+ dist_base + GIC_DIST_PRI + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+ dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+ dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+ writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+ writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ int i;
+
+ for (i = 0; i < MAX_GIC_NR; i++) {
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ gic_cpu_save(i);
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ gic_cpu_restore(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER:
+ gic_dist_save(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ gic_dist_restore(i);
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+ .notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+ gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_enable);
+
+ gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_conf);
+
+ cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
+#ifdef CONFIG_OF
+static int gic_irq_domain_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 3)
+ return -EINVAL;
+
+ /* Get the interrupt number and add 16 to skip over SGIs */
+ *out_hwirq = intspec[1] + 16;
+
+ /* For SPIs, we need to add 16 more to get the GIC irq ID number */
+ if (!intspec[0])
+ *out_hwirq += 16;
+
+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+#endif
+
+const struct irq_domain_ops gic_irq_domain_ops = {
+#ifdef CONFIG_OF
+ .dt_translate = gic_irq_domain_dt_translate,
+#endif
+};
+
+void __init gic_init(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
struct gic_chip_data *gic;
+ struct irq_domain *domain;
+ int gic_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
+ domain = &gic->domain;
gic->dist_base = dist_base;
gic->cpu_base = cpu_base;
- gic->irq_offset = (irq_start - 1) & ~31;
- if (gic_nr == 0)
+ /*
+ * For primary GICs, skip over SGIs.
+ * For secondary GICs, skip over PPIs, too.
+ */
+ if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
+ domain->hwirq_base = 16;
+ if (irq_start > 0)
+ irq_start = (irq_start & ~31) + 16;
+ } else
+ domain->hwirq_base = 32;
- gic_dist_init(gic, irq_start);
+ /*
+ * Find out how many interrupts are supported.
+ * The GIC only supports up to 1020 interrupt sources.
+ */
+ gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
+ domain->nr_irq = gic_irqs - domain->hwirq_base;
+ domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq,
+ numa_node_id());
+ if (IS_ERR_VALUE(domain->irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ domain->irq_base = irq_start;
+ }
+ domain->priv = gic;
+ domain->ops = &gic_irq_domain_ops;
+ irq_domain_add(domain);
+
+ gic_chip.flags |= gic_arch_extn.flags;
+ gic_dist_init(gic);
gic_cpu_init(gic);
+ gic_pm_init(gic);
}
void __cpuinit gic_secondary_init(unsigned int gic_nr)
@@ -369,20 +624,15 @@
gic_cpu_init(&gic_data[gic_nr]);
}
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- irq_set_status_flags(irq, IRQ_NOPROBE);
- gic_unmask_irq(irq_get_irq_data(irq));
- local_irq_restore(flags);
-}
-
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
- unsigned long map = *cpus_addr(*mask);
+ int cpu;
+ unsigned long map = 0;
+
+ /* Convert our logical CPU mask into a physical one. */
+ for_each_cpu(cpu, mask)
+ map |= 1 << cpu_logical_map(cpu);
/*
* Ensure that stores to Normal memory are visible to the
@@ -394,3 +644,35 @@
writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *cpu_base;
+ void __iomem *dist_base;
+ int irq;
+ struct irq_domain *domain = &gic_data[gic_cnt].domain;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ dist_base = of_iomap(node, 0);
+ WARN(!dist_base, "unable to map gic dist registers\n");
+
+ cpu_base = of_iomap(node, 1);
+ WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+ domain->of_node = of_node_get(node);
+
+ gic_init(gic_cnt, -1, dist_base, cpu_base);
+
+ if (parent) {
+ irq = irq_of_parse_and_map(node, 0);
+ gic_cascade_irq(gic_cnt, irq);
+ }
+ gic_cnt++;
+ return 0;
+}
+#endif
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7aa4262..197f81c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,7 +259,6 @@
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
}
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index cd4458f..cb47d28 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,7 @@
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
+#define CPUID_MPIDR 5
#define CPUID_EXT_PFR0 "c1, 0"
#define CPUID_EXT_PFR1 "c1, 1"
@@ -70,6 +71,11 @@
return read_cpuid(CPUID_TCM);
}
+static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
+{
+ return read_cpuid(CPUID_MPIDR);
+}
+
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 9f390ce..b5c9f5b 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,7 +12,12 @@
#endif
};
+struct omap_device;
+
struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+ struct omap_device *od;
+#endif
};
#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7a21d0b..7f27fab 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@
int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
#ifdef CONFIG_DMABOUNCE
/*
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e209..88d6181 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r2, r6, lr
- movne r0, sp
- adrne lr, BSYM(1b)
- bne do_local_timer
-#endif
#endif
9997:
.endm
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h
new file mode 100644
index 0000000..5abaf5b
--- /dev/null
+++ b/arch/arm/include/asm/exception.h
@@ -0,0 +1,19 @@
+/*
+ * Annotations for marking C functions as exception handlers.
+ *
+ * These should only be used for C functions that are called from the low
+ * level exception entry code and not any intervening C code.
+ */
+#ifndef __ASM_ARM_EXCEPTION_H
+#define __ASM_ARM_EXCEPTION_H
+
+#include <linux/ftrace.h>
+
+#define __exception __attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry __irq_entry
+#else
+#define __exception_irq_entry __exception
+#endif
+
+#endif /* __ASM_ARM_EXCEPTION_H */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad180..ddf07a9 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
typedef struct {
unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
- unsigned int local_timer_irqs;
-#endif
#ifdef CONFIG_SMP
unsigned int ipi_irqs[NR_IPI];
#endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82..74ebc80 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -62,14 +58,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..3e91f22 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -33,19 +33,32 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
+#include <linux/irqdomain.h>
+struct device_node;
+
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
struct gic_chip_data {
- unsigned int irq_offset;
void __iomem *dist_base;
void __iomem *cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+ struct irq_domain domain;
+#endif
+ unsigned int gic_irqs;
};
#endif
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index f389b27..c190bc9 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -50,6 +50,7 @@
#define ARM_DEBUG_ARCH_V6_1 2
#define ARM_DEBUG_ARCH_V7_ECP14 3
#define ARM_DEBUG_ARCH_V7_MM 4
+#define ARM_DEBUG_ARCH_V7_1 5
/* Breakpoint */
#define ARM_BREAKPOINT_EXECUTE 0
@@ -57,6 +58,7 @@
/* Watchpoints */
#define ARM_BREAKPOINT_LOAD 1
#define ARM_BREAKPOINT_STORE 2
+#define ARM_FSR_ACCESS_MASK (1 << 11)
/* Privilege Levels */
#define ARM_BREAKPOINT_PRIV 1
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 080d74f..c6a1842 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,9 @@
#ifndef __ASM_ARM_LOCALTIMER_H
#define __ASM_ARM_LOCALTIMER_H
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+
struct clock_event_device;
/*
@@ -17,27 +20,20 @@
*/
void percpu_timer_setup(void);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-
#ifdef CONFIG_LOCAL_TIMERS
#ifdef CONFIG_HAVE_ARM_TWD
#include "smp_twd.h"
-#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop(c) twd_timer_stop((c))
#else
/*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
*/
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
#endif
@@ -52,6 +48,10 @@
{
return -ENXIO;
}
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
#endif
#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 217aa19..727da11 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@
struct machine_desc {
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
- unsigned long boot_params; /* tagged list */
+ unsigned long atag_offset; /* tagged list (relative) */
const char **dt_compat; /* array of device tree
* 'compatible' strings */
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5..b36f365 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@
#define MT_MEMORY_NONCACHED 11
#define MT_MEMORY_DTCM 12
#define MT_MEMORY_ITCM 13
+#define MT_MEMORY_SO 14
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index b8de516..a8997d7 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -16,9 +16,12 @@
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
-#include <mach/memory.h>
#include <asm/sizes.h>
+#ifdef CONFIG_NEED_MACH_MEMORY_H
+#include <mach/memory.h>
+#endif
+
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
@@ -77,16 +80,7 @@
*/
#define IOREMAP_MAX_ORDER 24
-/*
- * Size of DMA-consistent memory region. Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
#define CONSISTENT_END (0xffe00000UL)
-#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
#else /* CONFIG_MMU */
@@ -160,7 +154,6 @@
* so that all we need to do is modify the 8-bit constant field.
*/
#define __PV_BITS_31_24 0x81000000
-#define __PV_BITS_23_16 0x00810000
extern unsigned long __pv_phys_offset;
#define PHYS_OFFSET __pv_phys_offset
@@ -178,9 +171,6 @@
{
unsigned long t;
__pv_stub(x, t, "add", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- __pv_stub(t, t, "add", __PV_BITS_23_16);
-#endif
return t;
}
@@ -188,9 +178,6 @@
{
unsigned long t;
__pv_stub(x, t, "sub", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- __pv_stub(t, t, "sub", __PV_BITS_23_16);
-#endif
return t;
}
#else
@@ -200,7 +187,11 @@
#endif
#ifndef PHYS_OFFSET
+#ifdef PLAT_PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET
+#else
+#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
+#endif
#endif
/*
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 543b449..6c6809f 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -31,11 +31,7 @@
/* Add __virt_to_phys patching state as well */
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
-#else
#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#endif
#else
#define MODULE_ARCH_VERMAGIC_P2V ""
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5750704..f1956b2 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,9 @@
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_stronglyordered(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b7e82c4..71d99b8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -13,7 +13,12 @@
#define __ARM_PMU_H__
#include <linux/interrupt.h>
+#include <linux/perf_event.h>
+/*
+ * Types of PMUs that can be accessed directly and require mutual
+ * exclusion between profiling tools.
+ */
enum arm_pmu_type {
ARM_PMU_DEVICE_CPU = 0,
ARM_NUM_PMU_DEVICES,
@@ -37,21 +42,17 @@
* reserve_pmu() - reserve the hardware performance counters
*
* Reserve the hardware performance counters in the system for exclusive use.
- * The platform_device for the system is returned on success, ERR_PTR()
- * encoded error on failure.
+ * Returns 0 on success or -EBUSY if the lock is already held.
*/
-extern struct platform_device *
+extern int
reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
*
* Release the performance counters and allow someone else to use them.
- * Callers must have disabled the counters and released IRQs before calling
- * this. The platform_device returned from reserve_pmu() must be passed as
- * a cookie.
*/
-extern int
+extern void
release_pmu(enum arm_pmu_type type);
/**
@@ -68,24 +69,78 @@
#include <linux/err.h>
-static inline struct platform_device *
+static inline int
reserve_pmu(enum arm_pmu_type type)
{
- return ERR_PTR(-ENODEV);
-}
-
-static inline int
-release_pmu(enum arm_pmu_type type)
-{
return -ENODEV;
}
-static inline int
-init_pmu(enum arm_pmu_type type)
-{
- return -ENODEV;
-}
+static inline void
+release_pmu(enum arm_pmu_type type) { }
#endif /* CONFIG_CPU_HAS_PMU */
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+ /*
+ * The events that are active on the PMU for the given index.
+ */
+ struct perf_event **events;
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long *used_mask;
+
+ /*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+ raw_spinlock_t pmu_lock;
+};
+
+struct arm_pmu {
+ struct pmu pmu;
+ enum arm_perf_pmu_ids id;
+ enum arm_pmu_type type;
+ cpumask_t active_irqs;
+ const char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*get_event_idx)(struct pmu_hw_events *hw_events,
+ struct hw_perf_event *hwc);
+ int (*set_event_filter)(struct hw_perf_event *evt,
+ struct perf_event_attr *attr);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ void (*reset)(void *);
+ int (*map_event)(struct perf_event *event);
+ int num_events;
+ atomic_t active_events;
+ struct mutex reserve_mutex;
+ u64 max_period;
+ struct platform_device *plat_device;
+ struct pmu_hw_events *(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx, int overflow);
+
+int armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 633d1cb..9e92cb2 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -81,6 +81,10 @@
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+/* These three are private to arch/arm/kernel/suspend.c */
+extern void cpu_do_suspend(void *);
+extern void cpu_do_resume(void *);
#else
#define cpu_proc_init processor._proc_init
#define cpu_proc_fin processor._proc_fin
@@ -89,6 +93,10 @@
#define cpu_dcache_clean_area processor.dcache_clean_area
#define cpu_set_pte_ext processor.set_pte_ext
#define cpu_do_switch_mm processor.switch_mm
+
+/* These three are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend processor.do_suspend
+#define cpu_do_resume processor.do_resume
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index e42d96a..1e5717a 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -33,6 +33,11 @@
asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
/*
+ * Called from C code, this handles an IPI.
+ */
+void handle_IPI(int ipinr, struct pt_regs *regs);
+
+/*
* Setup the set of possible CPUs (via set_cpu_possible)
*/
extern void smp_init_cpus(void);
@@ -66,6 +71,12 @@
extern void platform_smp_prepare_cpus(unsigned int);
/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
+
+/*
* Initial data for bringing up a secondary CPU.
*/
struct secondary_data {
@@ -88,9 +99,4 @@
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981..ef9ffba9 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@
extern void __iomem *twd_base;
-int twd_timer_ack(void);
void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index b0e4e1a..1c0a551 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -1,22 +1,7 @@
#ifndef __ASM_ARM_SUSPEND_H
#define __ASM_ARM_SUSPEND_H
-#include <asm/memory.h>
-#include <asm/tlbflush.h>
-
extern void cpu_resume(void);
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
- extern int __cpu_suspend(int, long, unsigned long,
- int (*)(unsigned long));
- int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
- flush_tlb_all();
- return ret;
-}
+extern int cpu_suspend(unsigned long, int (*)(unsigned long));
#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 832888d..ed6b049 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -62,13 +62,6 @@
#include <asm/outercache.h>
-#define __exception __attribute__((section(".exception.text")))
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#define __exception_irq_entry __irq_entry
-#else
-#define __exception_irq_entry __exception
-#endif
-
struct thread_info;
struct task_struct;
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index accbd7c..a7e457e 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -1,6 +1,39 @@
#ifndef _ASM_ARM_TOPOLOGY_H
#define _ASM_ARM_TOPOLOGY_H
+#ifdef CONFIG_ARM_CPU_TOPOLOGY
+
+#include <linux/cpumask.h>
+
+struct cputopo_arm {
+ int thread_id;
+ int core_id;
+ int socket_id;
+ cpumask_t thread_sibling;
+ cpumask_t core_sibling;
+};
+
+extern struct cputopo_arm cpu_topology[NR_CPUS];
+
+#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
+#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
+#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling)
+#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling)
+
+#define mc_capable() (cpu_topology[0].socket_id != -1)
+#define smt_capable() (cpu_topology[0].thread_id != -1)
+
+void init_cpu_topology(void);
+void store_cpu_topology(unsigned int cpuid);
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+
+#else
+
+static inline void init_cpu_topology(void) { }
+static inline void store_cpu_topology(unsigned int cpuid) { }
+
+#endif
+
#include <asm-generic/topology.h>
#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f7887dc..7cac26c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o suspend.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
@@ -43,6 +43,13 @@
else
obj-$(CONFIG_KPROBES) += kprobes-arm.o
endif
+obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o
+test-kprobes-objs := kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs += kprobes-test-thumb.o
+else
+test-kprobes-objs += kprobes-test-arm.o
+endif
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
@@ -66,6 +73,7 @@
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
+obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
ifneq ($(CONFIG_ARCH_EBSA110),y)
obj-y += io.o
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index bcd66e0..b7685f1 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
- addruart \tmp1, \tmp2
+ addruart \tmp1, \tmp2, \rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 742b610..673c806 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -95,7 +95,7 @@
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
- ldr r8, =PLAT_PHYS_OFFSET
+ ldr r8, =PHYS_OFFSET @ always constant in this case
#endif
/*
@@ -234,7 +234,7 @@
* This allows debug messages to be output
* via a serial console before paging_init.
*/
- addruart r7, r3
+ addruart r7, r3, r0
mov r3, r3, lsr #20
mov r3, r3, lsl #2
@@ -488,13 +488,8 @@
add r5, r5, r3 @ adjust table end address
add r7, r7, r3 @ adjust __pv_phys_offset address
str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
-#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned
-#else
- mov r6, r3, lsr #16 @ constant for add/sub instructions
- teq r3, r6, lsl #16 @ must be 64kiB aligned
-#endif
THUMB( it ne @ cross section branch )
bne __error
str r6, [r7, #4] @ save to __pv_offset
@@ -510,20 +505,8 @@
.text
__fixup_a_pv_table:
#ifdef CONFIG_THUMB2_KERNEL
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- lsls r0, r6, #24
- lsr r6, #8
- beq 1f
- clz r7, r0
- lsr r0, #24
- lsl r0, r7
- bic r0, 0x0080
- lsrs r7, #1
- orrcs r0, #0x0080
- orr r0, r0, r7, lsl #12
-#endif
-1: lsls r6, #24
- beq 4f
+ lsls r6, #24
+ beq 2f
clz r7, r6
lsr r6, #24
lsl r6, r7
@@ -532,43 +515,25 @@
orrcs r6, #0x0080
orr r6, r6, r7, lsl #12
orr r6, #0x4000
- b 4f
-2: @ at this point the C flag is always clear
- add r7, r3
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- ldrh ip, [r7]
- tst ip, 0x0400 @ the i bit tells us LS or MS byte
- beq 3f
- cmp r0, #0 @ set C flag, and ...
- biceq ip, 0x0400 @ immediate zero value has a special encoding
- streqh ip, [r7] @ that requires the i bit cleared
-#endif
-3: ldrh ip, [r7, #2]
+ b 2f
+1: add r7, r3
+ ldrh ip, [r7, #2]
and ip, 0x8f00
- orrcc ip, r6 @ mask in offset bits 31-24
- orrcs ip, r0 @ mask in offset bits 23-16
+ orr ip, r6 @ mask in offset bits 31-24
strh ip, [r7, #2]
-4: cmp r4, r5
+2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 2b
+ bcc 1b
bx lr
#else
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- and r0, r6, #255 @ offset bits 23-16
- mov r6, r6, lsr #8 @ offset bits 31-24
-#else
- mov r0, #0 @ just in case...
-#endif
- b 3f
-2: ldr ip, [r7, r3]
+ b 2f
+1: ldr ip, [r7, r3]
bic ip, ip, #0x000000ff
- tst ip, #0x400 @ rotate shift tells us LS or MS byte
- orrne ip, ip, r6 @ mask in offset bits 31-24
- orreq ip, ip, r0 @ mask in offset bits 23-16
+ orr ip, ip, r6 @ mask in offset bits 31-24
str ip, [r7, r3]
-3: cmp r4, r5
+2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 2b
+ bcc 1b
mov pc, lr
#endif
ENDPROC(__fixup_a_pv_table)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1..814a52a9 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
-static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -137,10 +136,11 @@
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
- "CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n"))
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
return ARM_DEBUG_ARCH_V6;
+ }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@
static int debug_arch_supported(void)
{
u8 arch = get_debug_arch();
- return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+ /* We don't support the memory-mapped interface. */
+ return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+ arch >= ARM_DEBUG_ARCH_V7_1;
}
-/* Determine number of BRP register available. */
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 28) & 0xf) + 1;
+}
+
+/* Determine number of BRP registers available. */
static int get_num_brp_resources(void)
{
u32 didr;
@@ -176,9 +187,10 @@
static int get_num_wrps(void)
{
/*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
+ * On debug architectures prior to 7.1, when a watchpoint fires, the
+ * only way to work out which watchpoint it was is by disassembling
+ * the faulting instruction and working out the address of the memory
+ * access.
*
* Furthermore, we can only do this if the watchpoint was precise
* since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@
* [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
* that it is set on some implementations].
*/
+ if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+ return 1;
-#if 0
- int wrps;
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- wrps = ((didr >> 28) & 0xf) + 1;
-#endif
- int wrps = 1;
-
- if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
- wrps = get_num_brp_resources() - 1;
-
- return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
- if (core_has_mismatch_brps())
- return get_num_wrps();
- return 0;
+ return get_num_wrp_resources();
}
/* Determine number of usable BRPs available. */
static int get_num_brps(void)
{
int brps = get_num_brp_resources();
- if (core_has_mismatch_brps())
- brps -= get_num_reserved_brps();
- return brps;
+ return core_has_mismatch_brps() ? brps - 1 : brps;
}
/*
@@ -239,7 +232,7 @@
/* Ensure that halting mode is disabled. */
if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
- "halting debug mode enabled. Unable to access hardware resources.\n")) {
+ "halting debug mode enabled. Unable to access hardware resources.\n")) {
ret = -EPERM;
goto out;
}
@@ -255,6 +248,7 @@
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
break;
case ARM_DEBUG_ARCH_V7_ECP14:
+ case ARM_DEBUG_ARCH_V7_1:
ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
break;
default:
@@ -346,24 +340,10 @@
val_base = ARM_BASE_BVR;
slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
max_slots = core_num_brps;
- if (info->step_ctrl.enabled) {
- /* Override the breakpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- }
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled) {
- /* Install into the reserved breakpoint region. */
- ctrl_base = ARM_BASE_BCR + core_num_brps;
- val_base = ARM_BASE_BVR + core_num_brps;
- /* Override the watchpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- } else {
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- }
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -382,6 +362,17 @@
goto out;
}
+ /* Override the breakpoint data with the step data. */
+ if (info->step_ctrl.enabled) {
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+ i = 0;
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ }
+ }
+
/* Setup the address register. */
write_wb_reg(val_base + i, addr);
@@ -405,10 +396,7 @@
max_slots = core_num_brps;
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled)
- base = ARM_BASE_BCR + core_num_brps;
- else
- base = ARM_BASE_WCR;
+ base = ARM_BASE_WCR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -426,6 +414,13 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
return;
+ /* Ensure that we disable the mismatch breakpoint. */
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+ info->step_ctrl.enabled) {
+ i = 0;
+ base = ARM_BASE_BCR + core_num_brps;
+ }
+
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -632,10 +627,9 @@
* we can use the mismatch feature as a poor-man's hardware
* single-step, but this only works for per-task breakpoints.
*/
- if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
- || !bp->hw.bp_target),
- "overflow handler required but none found\n")) {
+ if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+ !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+ pr_warning("overflow handler required but none found\n");
ret = -EINVAL;
}
out:
@@ -666,34 +660,62 @@
arch_install_hw_breakpoint(bp);
}
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
{
- int i;
+ int i, access;
+ u32 val, ctrl_reg, alignment_mask;
struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint_ctrl ctrl;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- /* Without a disassembler, we can only handle 1 watchpoint. */
- BUG_ON(core_num_wrps > 1);
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
- if (wp == NULL) {
- rcu_read_unlock();
- continue;
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ /*
+ * The DFAR is an unknown value on debug architectures prior
+ * to 7.1. Since we only allow a single watchpoint on these
+ * older CPUs, we can set the trigger to the lowest possible
+ * faulting address.
+ */
+ if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+ BUG_ON(i > 0);
+ info->trigger = wp->attr.bp_addr;
+ } else {
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+ alignment_mask = 0x7;
+ else
+ alignment_mask = 0x3;
+
+ /* Check if the watchpoint value matches. */
+ val = read_wb_reg(ARM_BASE_WVR + i);
+ if (val != (addr & ~alignment_mask))
+ goto unlock;
+
+ /* Possible match, check the byte address select. */
+ ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+ decode_ctrl_reg(ctrl_reg, &ctrl);
+ if (!((1 << (addr & alignment_mask)) & ctrl.len))
+ goto unlock;
+
+ /* Check that the access type matches. */
+ access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+ HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+
+ /* We have a winner. */
+ info->trigger = addr;
}
- /*
- * The DFAR is an unknown value. Since we only allow a
- * single watchpoint, we can set the trigger to the lowest
- * possible faulting address.
- */
- info = counter_arch_bp(wp);
- info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
perf_bp_event(wp, regs);
@@ -705,6 +727,7 @@
if (!wp->overflow_handler)
enable_single_step(wp, instruction_pointer(regs));
+unlock:
rcu_read_unlock();
}
}
@@ -717,7 +740,7 @@
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- for (i = 0; i < core_num_reserved_brps; ++i) {
+ for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
@@ -820,7 +843,7 @@
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
- watchpoint_handler(addr, regs);
+ watchpoint_handler(addr, fsr, regs);
break;
default:
ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
{
- int i, cpu = smp_processor_id();
+ int cpu = smp_processor_id();
+
+ pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+ instr, cpu);
+
+ /* Set the error flag for this CPU and skip the faulting instruction. */
+ cpumask_set_cpu(cpu, &debug_err_mask);
+ instruction_pointer(regs) += 4;
+ return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+ .instr_mask = 0x0fe80f10,
+ .instr_val = 0x0e000e10,
+ .fn = debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+ int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 dbg_power;
- cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,57 @@
* Access Register to avoid taking undefined instruction exceptions
* later on.
*/
- if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ switch (debug_arch) {
+ case ARM_DEBUG_ARCH_V6:
+ case ARM_DEBUG_ARCH_V6_1:
+ /* ARMv6 cores just need to reset the registers. */
+ goto reset_regs;
+ case ARM_DEBUG_ARCH_V7_ECP14:
/*
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
- if ((dbg_power & 0x1) == 0) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
- cpumask_or(cpumask, cpumask, cpumask_of(cpu));
- return;
- }
-
+ if ((dbg_power & 0x1) == 0)
+ err = -EPERM;
+ break;
+ case ARM_DEBUG_ARCH_V7_1:
/*
- * Unconditionally clear the lock by writing a value
- * other than 0xC5ACCE55 to the access register.
+ * Ensure the OS double lock is clear.
*/
- asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
- isb();
-
- /*
- * Clear any configured vector-catch events before
- * enabling monitor mode.
- */
- asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
- isb();
+ asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 1)
+ err = -EPERM;
+ break;
}
+ if (err) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+
+ /*
+ * Clear any configured vector-catch events before
+ * enabling monitor mode.
+ */
+ asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+ isb();
+
+reset_regs:
if (enable_monitor_mode())
return;
/* We must also reset any reserved registers. */
- for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+ raw_num_brps = get_num_brp_resources();
+ for (i = 0; i < raw_num_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -895,6 +957,7 @@
{
if (action == CPU_ONLINE)
smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
return NOTIFY_OK;
}
@@ -905,7 +968,6 @@
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
- cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
@@ -916,28 +978,31 @@
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
- core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
- pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps + core_num_reserved_brps, core_num_wrps);
-
- if (core_num_reserved_brps)
- pr_info("%d breakpoint(s) reserved for watchpoint "
- "single-step.\n", core_num_reserved_brps);
+ /*
+ * We need to tread carefully here because DBGSWENABLE may be
+ * driven low on this core and there isn't an architected way to
+ * determine that.
+ */
+ register_undef_hook(&debug_reg_hook);
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, &cpumask, 1);
- if (!cpumask_empty(&cpumask)) {
+ on_each_cpu(reset_ctrl_regs, NULL, 1);
+ unregister_undef_hook(&debug_reg_hook);
+ if (!cpumask_empty(&debug_err_mask)) {
core_num_brps = 0;
- core_num_reserved_brps = 0;
core_num_wrps = 0;
return 0;
}
+ pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+ core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+ "", core_num_wrps);
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index de3dcab..7cb2926 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -35,8 +35,8 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
-#include <linux/ftrace.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
@@ -59,9 +59,6 @@
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- show_local_irqs(p, prec);
-#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee..9fe8910 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -971,6 +972,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
{
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 0000000..fc82de8
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_MEM(15, 3f+1) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val) \
+ TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+ TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+ TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+ TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
+ TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
+ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
+ TEST( op s " r4, pc" ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val) \
+ _DATA_PROCESSING_DNM(op,"",val) \
+ _DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val) \
+ TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \
+ TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vs pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vs sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \
+ TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \
+ TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \
+ TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
+ TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
+ TEST_R( op "eq r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
+ TEST_R( op " r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val) \
+ TEST_R( op "eq" s " r0, r",1, val, "") \
+ TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \
+ TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \
+ TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \
+ TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \
+ TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \
+ TEST_R( op "vs" s " r6, r",10,val, ", rrx") \
+ TEST( op "vs" s " r7, pc, lsl #3") \
+ TEST( op "vs" s " r7, sp, lsr #4") \
+ TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \
+ TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \
+ TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \
+ TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
+ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
+ TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
+ TEST( op "eq" s " r0, #0xf5") \
+ TEST( op "ne" s " r11, #0xf5000000") \
+ TEST( op s " r7, #0x000af000") \
+ TEST( op s " r4, #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val) \
+ _DATA_PROCESSING_DM(op,"",val) \
+ _DATA_PROCESSING_DM(op,"s",val)
+
+ DATA_PROCESSING_DNM("and",0xf00f00ff)
+ DATA_PROCESSING_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING_DNM("sub",VAL2)
+ DATA_PROCESSING_DNM("rsb",VAL2)
+ DATA_PROCESSING_DNM("add",VAL2)
+ DATA_PROCESSING_DNM("adc",VAL2)
+ DATA_PROCESSING_DNM("sbc",VAL2)
+ DATA_PROCESSING_DNM("rsc",VAL2)
+ DATA_PROCESSING_NM("tst",0xf00f00ff)
+ DATA_PROCESSING_NM("teq",0xf00f00ff)
+ DATA_PROCESSING_NM("cmp",VAL2)
+ DATA_PROCESSING_NM("cmn",VAL2)
+ DATA_PROCESSING_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING_DM("mov",VAL2)
+ DATA_PROCESSING_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING_DM("mvn",VAL2)
+
+ TEST("mov ip, sp") /* This has special case emulation code */
+
+ TEST_SUPPORTED("mov pc, #0x1000");
+ TEST_SUPPORTED("mov sp, #0x1000");
+ TEST_SUPPORTED("cmp pc, #0x1000");
+ TEST_SUPPORTED("cmp sp, #0x1000");
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc")
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED("movs pc, r1")
+ TEST_UNSUPPORTED("movs pc, r1, lsl r2")
+ TEST_UNSUPPORTED("movs pc, #0x10000")
+ TEST_UNSUPPORTED("adds pc, lr, r1")
+ TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2")
+ TEST_UNSUPPORTED("adds pc, lr, #4")
+
+ /* Data-processing with SP as target */
+ TEST("add sp, sp, #16")
+ TEST("sub sp, sp, #8")
+ TEST("bic sp, sp, #0x20")
+ TEST("orr sp, sp, #0x20")
+ TEST_PR( "add sp, r",10,0,", r",11,4,"")
+ TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"")
+ TEST_P( "mov sp, r",10,0,"")
+ TEST_PR( "mov sp, r",10,0,", asl r",12,0,"")
+
+ /* Data-processing with PC as target */
+ TEST_BF( "add pc, pc, #2f-1b-8")
+ TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
+ TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
+ TEST_BF_R ("mov pc, r",0,2f,"")
+ TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+ TEST_BB( "sub pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+ TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
+ TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
+ TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
+ TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
+#endif
+ TEST_GROUP("Miscellaneous instructions")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrspl r7, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, lr")
+ TEST_UNSUPPORTED("msr spsr, r0")
+
+ TEST_BF_R("bx r",0,2f,"")
+ TEST_BB_R("bx r",7,2f,"")
+ TEST_BF_R("bxeq r",14,2f,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clzeq r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+ TEST( "clz r4, sp")
+ TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0")
+ TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("bxj r0")
+#endif
+
+ TEST_BF_R("blx r",0,2f,"")
+ TEST_BB_R("blx r",7,2f,"")
+ TEST_BF_R("blxeq r",14,2f,"")
+ TEST_UNSUPPORTED(".word 0x0120003f @ blx pc")
+
+ TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qsub lr, r",9, VAL2,", r13")
+ TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdsub lr, r",9, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc")
+ TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1")
+
+ TEST_UNSUPPORTED("bkpt 0xffff")
+ TEST_UNSUPPORTED("bkpt 0x0000")
+
+ TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+
+ TEST_GROUP("Halfword multiply and multiply-accumulate")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+
+ TEST_GROUP("Multiply and multiply-accumulate")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "mul lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+ TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "muls lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+ TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umaal lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+#endif
+
+ TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+ TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+ TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+ TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+ TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+
+ TEST_GROUP("Synchronization primitives")
+
+ /*
+ * Use hard coded constants for SWP instructions to avoid warnings
+ * about deprecated instructions.
+ */
+ TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
+ TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
+ TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
+ TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
+ TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+ TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
+ TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
+
+ TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("ldrex r2, [sp]")
+ TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
+ TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
+ TEST_UNSUPPORTED("strexb r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexb r2, [sp]")
+ TEST_UNSUPPORTED("strexh r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexh r2, [sp]")
+#endif
+ TEST_GROUP("Extra load/store instructions")
+
+ TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
+ TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
+ TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
+ TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc")
+
+ TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc")
+
+ TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]")
+ TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]")
+ TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!")
+ TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!")
+ TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48")
+ TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48")
+
+ TEST_P( "ldrh r0, [r",0, 24,", #-2]")
+ TEST_P( "ldrvsh r14, [r",13,0, ", #2]")
+ TEST_P( "ldrh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrvch r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrh r10, [r",9, 64,"], #-48")
+ TEST( "ldrh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48")
+
+ TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]")
+ TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11")
+
+ TEST_P( "ldrsb r0, [r",0, 24,", #-1]")
+ TEST_P( "ldrgesb r14, [r",13,0, ", #1]")
+ TEST_P( "ldrsb r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrltsb r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsb r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsb r10, [r",9, 64,"], #-48")
+ TEST( "ldrsb r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48")
+
+ TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11")
+
+ TEST_P( "ldrsh r0, [r",0, 24,", #-1]")
+ TEST_P( "ldreqsh r14, [r",13,0 ,", #1]")
+ TEST_P( "ldrsh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrnesh r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsh r10, [r",9, 64,"], #-48")
+ TEST( "ldrsh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("strht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrht r1, [r2], r3")
+ TEST_UNSUPPORTED("strht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
+#endif
+
+ TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
+ TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
+ TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+ TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
+
+ TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]")
+ TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]")
+ TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"")
+ TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc")
+
+ TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]")
+ TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]")
+ TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!")
+ TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!")
+ TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48")
+ TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!")
+
+ TEST_P( "ldrd r0, [r",0, 24,", #-8]")
+ TEST_P( "ldrhid r8, [r",13,0, ", #8]")
+ TEST_P( "ldrd r4, [r",2, 24,", #16]!")
+ TEST_P( "ldrlsd r6, [r",11,24,", #-16]!")
+ TEST_P( "ldrd r2, [r",5, 24,"], #48")
+ TEST_P( "ldrd r10, [r",9,6,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48")
+ TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48")
+
+ TEST_GROUP("Miscellaneous")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0")
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0")
+#endif
+
+ TEST_UNSUPPORTED("msr cpsr, 0x13")
+ TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000")
+ TEST_UNSUPPORTED("msr spsr, 0x13")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED("dbg #0")
+#endif
+
+ TEST_GROUP("Load/store word and unsigned byte")
+
+#define LOAD_STORE(byte) \
+ TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \
+ TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \
+ TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \
+ TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \
+ TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \
+ TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \
+ TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \
+ TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
+ TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \
+ TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \
+ TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \
+ TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \
+ TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \
+ TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \
+ TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \
+ TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \
+ TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \
+ TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \
+ TEST( "ldr"byte" r0, [pc, #0]") \
+ TEST_R( "ldr"byte" r12, [pc, r",14,0,"]")
+
+ LOAD_STORE("")
+ TEST_P( "str pc, [r",0,0,", #15*4]")
+ TEST_R( "str pc, [sp, r",2,15*4,"]")
+ TEST_BF( "ldr pc, [sp, #15*4]")
+ TEST_BF_R("ldr pc, [sp, r",2,15*4,"]")
+
+ TEST_P( "str sp, [r",0,0,", #13*4]")
+ TEST_R( "str sp, [sp, r",2,13*4,"]")
+ TEST_BF( "ldr sp, [sp, #13*4]")
+ TEST_BF_R("ldr sp, [sp, r",2,13*4,"]")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+#endif
+ TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]")
+ TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]")
+
+ LOAD_STORE("b")
+ TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!")
+
+ TEST_UNSUPPORTED("ldrt r0, [r1], #4")
+ TEST_UNSUPPORTED("ldrt r1, [r2], r3")
+ TEST_UNSUPPORTED("strt r2, [r3], #4")
+ TEST_UNSUPPORTED("strt r3, [r4], r5")
+ TEST_UNSUPPORTED("ldrbt r4, [r5], #4")
+ TEST_UNSUPPORTED("ldrbt r5, [r6], r7")
+ TEST_UNSUPPORTED("strbt r6, [r7], #4")
+ TEST_UNSUPPORTED("strbt r7, [r8], r9")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+
+ TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10")
+ TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10")
+ TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10")
+ TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10")
+ TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+ TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10")
+
+ TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10")
+ TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10")
+ TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10")
+ TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10")
+ TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+ TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10")
+
+ TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10")
+ TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10")
+ TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10")
+ TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10")
+ TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+ TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+
+ TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10")
+ TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10")
+ TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10")
+ TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10")
+ TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+ TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10")
+
+ TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10")
+ TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10")
+ TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10")
+ TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10")
+ TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+ TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10")
+
+ TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10")
+ TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10")
+ TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10")
+ TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10")
+ TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+ TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc")
+#endif /* __LINUX_ARM_ARCH__ >= 7 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Packing, unpacking, saturation, and reversal")
+
+ TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2")
+ TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+ TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2")
+ TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8")
+
+ TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8")
+
+ TEST_R( "rev r0, r",0, VAL1,"")
+ TEST_R( "rev r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8")
+
+ TEST_R( "rev16 r0, r",0, VAL1,"")
+ TEST_R( "rev16 r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_R( "rbit r0, r",0, VAL1,"")
+ TEST_R( "rbit r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12")
+#endif
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7")
+ TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc")
+ TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8")
+ TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8")
+
+ TEST_R( "revsh r0, r",0, VAL1,"")
+ TEST_R( "revsh r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12")
+ TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc")
+
+ TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+
+ TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Signed multiplies")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8")
+
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8")
+
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10")
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc")
+
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8")
+
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc")
+
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Bit Field")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfcvs r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31");
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20")
+
+ TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ TEST_GROUP("Branch, branch with link, and block data transfer")
+
+ TEST_P( "stmda r",0, 16*4,", {r0}")
+ TEST_P( "stmeqda r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmda r",13,0, "!, {pc}")
+
+ TEST_P( "ldmda r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}")
+ TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}")
+ TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmda r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmia r",0, 16*4,", {r0}")
+ TEST_P( "stmmiia r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmia r",14,0, "!, {pc}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}")
+ TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0}")
+ TEST_P( "stmhidb r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmdb r",13,4, "!, {pc}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}")
+ TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {pc}")
+
+ TEST_P( "stmib r",0, 16*4,", {r0}")
+ TEST_P( "stmgtib r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmib r",13,-4, "!, {pc}")
+
+ TEST_P( "ldmib r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}")
+ TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}")
+ TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmib r",14,14*4,"!, {pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}")
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}")
+#endif
+ TEST_BF("b 2f")
+ TEST_BF("bl 2f")
+ TEST_BB("b 2b")
+ TEST_BB("bl 2b")
+
+ TEST_BF("beq 2f")
+ TEST_BF("bleq 2f")
+ TEST_BB("bne 2b")
+ TEST_BB("blne 2b")
+
+ TEST_BF("bgt 2f")
+ TEST_BF("blgt 2f")
+ TEST_BB("blt 2b")
+ TEST_BB("bllt 2b")
+
+ TEST_GROUP("Supervisor Call, and coprocessor instructions")
+
+ /*
+ * We can't really test these by executing them, so all
+ * we can do is check that probes are, or are not allowed.
+ * At the moment none are allowed...
+ */
+#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
+
+#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \
+ \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}")
+
+#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \
+ \
+ TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
+ COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+ TEST_UNSUPPORTED("svc 0")
+ TEST_UNSUPPORTED("svc 0xffffff")
+
+ TEST_UNSUPPORTED("svc 0")
+
+ TEST_GROUP("Unconditional instruction")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("srsda sp, 0x13")
+ TEST_UNSUPPORTED("srsdb sp, 0x13")
+ TEST_UNSUPPORTED("srsia sp, 0x13")
+ TEST_UNSUPPORTED("srsib sp, 0x13")
+ TEST_UNSUPPORTED("srsda sp!, 0x13")
+ TEST_UNSUPPORTED("srsdb sp!, 0x13")
+ TEST_UNSUPPORTED("srsia sp!, 0x13")
+ TEST_UNSUPPORTED("srsib sp!, 0x13")
+
+ TEST_UNSUPPORTED("rfeda sp")
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfeib sp")
+ TEST_UNSUPPORTED("rfeda sp!")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+ TEST_UNSUPPORTED("rfeib sp!")
+ TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc")
+ TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc")
+ TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc")
+ TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc")
+ TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!")
+ TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!")
+ TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!")
+ TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_X( "blx __dummy_thumb_subroutine_even",
+ ".thumb \n\t"
+ ".space 4 \n\t"
+ ".type __dummy_thumb_subroutine_even, %%function \n\t"
+ "__dummy_thumb_subroutine_even: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_even")
+
+ TEST_X( "blx __dummy_thumb_subroutine_odd",
+ ".thumb \n\t"
+ ".space 2 \n\t"
+ ".type __dummy_thumb_subroutine_odd, %%function \n\t"
+ "__dummy_thumb_subroutine_odd: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_odd")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+#if __LINUX_ARM_ARCH__ >= 6
+ COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+#endif
+
+ TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("cps 0x13")
+ TEST_UNSUPPORTED("cpsie i")
+ TEST_UNSUPPORTED("cpsid i")
+ TEST_UNSUPPORTED("cpsie i,0x13")
+ TEST_UNSUPPORTED("cpsid i,0x13")
+ TEST_UNSUPPORTED("setend le")
+ TEST_UNSUPPORTED("setend be")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_P("pli [r",0,0b,", #16]")
+ TEST( "pli [pc, #0]")
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 5
+ TEST_P("pld [r",0,32,", #-16]")
+ TEST( "pld [pc, #0]")
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]")
+ TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]")
+ TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]");
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+#endif
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
new file mode 100644
index 0000000..5e726c3
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -0,0 +1,1187 @@
+/*
+ * arch/arm/kernel/kprobes-test-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "16"
+
+#define DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \
+ tests \
+ kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
+
+#define CONDITION_INSTRUCTIONS(cc_pos, tests) \
+ kprobe_test_cc_position = cc_pos; \
+ DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_cc_position = 0;
+
+#define TEST_ITBLOCK(code) \
+ kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " mov r1, #0x11 \n\t" \
+ " mov r2, #0x22 \n\t" \
+ " mov r3, #0x33 \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END \
+ kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
+
+#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f+1) \
+ TEST_ARG_MEM(15, 3f) \
+ TEST_ARG_END("") \
+ " nop \n\t" /* To align 1f */ \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "3: adr lr, 2f+1 \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_thumb16_test_cases(void)
+{
+ kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
+
+ TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
+
+ TEST_R( "lsls r7, r",0,VAL1,", #5")
+ TEST_R( "lsls r0, r",7,VAL2,", #11")
+ TEST_R( "lsrs r7, r",0,VAL1,", #5")
+ TEST_R( "lsrs r0, r",7,VAL2,", #11")
+ TEST_R( "asrs r7, r",0,VAL1,", #5")
+ TEST_R( "asrs r0, r",7,VAL2,", #11")
+ TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_R( "adds r7, r",0,VAL1,", #5")
+ TEST_R( "adds r0, r",7,VAL2,", #2")
+ TEST_R( "subs r7, r",0,VAL1,", #5")
+ TEST_R( "subs r0, r",7,VAL2,", #2")
+ TEST( "movs.n r0, #0x5f")
+ TEST( "movs.n r7, #0xa0")
+ TEST_R( "cmp.n r",0,0x5e, ", #0x5f")
+ TEST_R( "cmp.n r",5,0x15f,", #0x5f")
+ TEST_R( "cmp.n r",7,0xa0, ", #0xa0")
+ TEST_R( "adds.n r",0,VAL1,", #0x5f")
+ TEST_R( "adds.n r",7,VAL2,", #0xa0")
+ TEST_R( "subs.n r",0,VAL1,", #0x5f")
+ TEST_R( "subs.n r",7,VAL2,", #0xa0")
+
+ TEST_GROUP("16-bit Thumb data-processing instructions")
+
+#define DATA_PROCESSING16(op,val) \
+ TEST_RR( op" r",0,VAL1,", r",7,val,"") \
+ TEST_RR( op" r",7,VAL2,", r",0,val,"")
+
+ DATA_PROCESSING16("ands",0xf00f00ff)
+ DATA_PROCESSING16("eors",0xf00f00ff)
+ DATA_PROCESSING16("lsls",11)
+ DATA_PROCESSING16("lsrs",11)
+ DATA_PROCESSING16("asrs",11)
+ DATA_PROCESSING16("adcs",VAL2)
+ DATA_PROCESSING16("sbcs",VAL2)
+ DATA_PROCESSING16("rors",11)
+ DATA_PROCESSING16("tst",0xf00f00ff)
+ TEST_R("rsbs r",0,VAL1,", #0")
+ TEST_R("rsbs r",7,VAL2,", #0")
+ DATA_PROCESSING16("cmp",0xf00f00ff)
+ DATA_PROCESSING16("cmn",0xf00f00ff)
+ DATA_PROCESSING16("orrs",0xf00f00ff)
+ DATA_PROCESSING16("muls",VAL2)
+ DATA_PROCESSING16("bics",0xf00f00ff)
+ DATA_PROCESSING16("mvns",VAL2)
+
+ TEST_GROUP("Special data instructions and branch and exchange")
+
+ TEST_RR( "add r",0, VAL1,", r",7,VAL2,"")
+ TEST_RR( "add r",3, VAL2,", r",8,VAL3,"")
+ TEST_RR( "add r",8, VAL3,", r",0,VAL1,"")
+ TEST_R( "add sp" ", r",8,-8, "")
+ TEST_R( "add r",14,VAL1,", pc")
+ TEST_BF_R("add pc" ", r",0,2f-1f-8,"")
+ TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+
+ TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"")
+ TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"")
+ TEST_R( "cmp sp" ", r",8,-8, "")
+
+ TEST_R( "mov r0, r",7,VAL2,"")
+ TEST_R( "mov r3, r",8,VAL3,"")
+ TEST_R( "mov r8, r",0,VAL1,"")
+ TEST_P( "mov sp, r",8,-8, "")
+ TEST( "mov lr, pc")
+ TEST_BF_R("mov pc, r",0,2f, "")
+
+ TEST_BF_R("bx r",0, 2f+1,"")
+ TEST_BF_R("bx r",14,2f+1,"")
+ TESTCASE_START("bx pc")
+ TEST_ARG_REG(14, 99f+1)
+ TEST_ARG_END("")
+ " nop \n\t" /* To align the bx pc*/
+ "50: nop \n\t"
+ "1: bx pc \n\t"
+ " bx lr \n\t"
+ ".arm \n\t"
+ " adr lr, 2f+1 \n\t"
+ " bx lr \n\t"
+ ".thumb \n\t"
+ "2: nop \n\t"
+ TESTCASE_END
+
+ TEST_BF_R("blx r",0, 2f+1,"")
+ TEST_BB_R("blx r",14,2f+1,"")
+ TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+
+ TEST_GROUP("Load from Literal Pool")
+
+ TEST_X( "ldr r0, 3f",
+ ".align \n\t"
+ "3: .word "__stringify(VAL1))
+ TEST_X( "ldr r7, 3f",
+ ".space 128 \n\t"
+ ".align \n\t"
+ "3: .word "__stringify(VAL2))
+
+ TEST_GROUP("16-bit Thumb Load/store instructions")
+
+ TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]")
+
+ TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]")
+ TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]")
+ TEST_P( "ldr r0, [r",1, 24,", #120]")
+ TEST_P( "ldr r7, [r",6, 24,", #120]")
+ TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]")
+ TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]")
+ TEST_P( "ldrb r0, [r",1, 24,", #30]")
+ TEST_P( "ldrb r7, [r",6, 24,", #30]")
+ TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]")
+ TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]")
+ TEST_P( "ldrh r0, [r",1, 24,", #60]")
+ TEST_P( "ldrh r7, [r",6, 24,", #60]")
+
+ TEST_R( "str r",0, VAL1,", [sp, #0]")
+ TEST_R( "str r",7, VAL2,", [sp, #160]")
+ TEST( "ldr r0, [sp, #0]")
+ TEST( "ldr r7, [sp, #160]")
+
+ TEST_RP("str r",0, VAL1,", [r",0, 24,"]")
+ TEST_P( "ldr r0, [r",0, 24,"]")
+
+ TEST_GROUP("Generate PC-/SP-relative address")
+
+ TEST("add r0, pc, #4")
+ TEST("add r7, pc, #1020")
+ TEST("add r0, sp, #4")
+ TEST("add r7, sp, #1020")
+
+ TEST_GROUP("Miscellaneous 16-bit instructions")
+
+ TEST_UNSUPPORTED( "cpsie i")
+ TEST_UNSUPPORTED( "cpsid i")
+ TEST_UNSUPPORTED( "setend le")
+ TEST_UNSUPPORTED( "setend be")
+
+ TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
+ TEST("sub sp, #0x7f*4")
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_BF_R( "cbnz r",0,0, ", 2f")
+ TEST_BF_R( "cbz r",2,-1,", 2f")
+ TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
+ TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
+)
+ TEST_R("sxth r0, r",7, HH1,"")
+ TEST_R("sxth r7, r",0, HH2,"")
+ TEST_R("sxtb r0, r",7, HH1,"")
+ TEST_R("sxtb r7, r",0, HH2,"")
+ TEST_R("uxth r0, r",7, HH1,"")
+ TEST_R("uxth r7, r",0, HH2,"")
+ TEST_R("uxtb r0, r",7, HH1,"")
+ TEST_R("uxtb r7, r",0, HH2,"")
+ TEST_R("rev r0, r",7, VAL1,"")
+ TEST_R("rev r7, r",0, VAL2,"")
+ TEST_R("rev16 r0, r",7, VAL1,"")
+ TEST_R("rev16 r7, r",0, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xba80")
+ TEST_UNSUPPORTED(".short 0xbabf")
+ TEST_R("revsh r0, r",7, VAL1,"")
+ TEST_R("revsh r7, r",0, VAL2,"")
+
+#define TEST_POPPC(code, offset) \
+ TESTCASE_START(code) \
+ TEST_ARG_PTR(13, offset) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code,0) \
+ TESTCASE_END
+
+ TEST("push {r0}")
+ TEST("push {r7}")
+ TEST("push {r14}")
+ TEST("push {r0-r7,r14}")
+ TEST("push {r0,r2,r4,r6,r14}")
+ TEST("push {r1,r3,r5,r7}")
+ TEST("pop {r0}")
+ TEST("pop {r7}")
+ TEST("pop {r0,r2,r4,r6}")
+ TEST_POPPC("pop {pc}",15*4)
+ TEST_POPPC("pop {r0-r7,pc}",7*4)
+ TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4)
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"")
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"")
+
+ TEST_UNSUPPORTED("bkpt.n 0")
+ TEST_UNSUPPORTED("bkpt.n 255")
+
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
+ TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+
+#define TEST_IT(code, code2) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " "code2" \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_IT("it eq","moveq r0,#0")
+ TEST_IT("it vc","movvc r0,#0")
+ TEST_IT("it le","movle r0,#0")
+ TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1")
+ TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2")
+ TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3")
+ TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3")
+ TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3")
+)
+
+ TEST_GROUP("Load and store multiple")
+
+ TEST_P("ldmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("ldmia r",7, 16*4,"!, {r0-r6}")
+ TEST_P("stmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("stmia r",0, 16*4,"!, {r0-r7}")
+
+ TEST_GROUP("Conditional branch and Supervisor Call instructions")
+
+CONDITION_INSTRUCTIONS(8,
+ TEST_BF("beq 2f")
+ TEST_BB("bne 2b")
+ TEST_BF("bgt 2f")
+ TEST_BB("blt 2b")
+)
+ TEST_UNSUPPORTED(".short 0xde00")
+ TEST_UNSUPPORTED(".short 0xdeff")
+ TEST_UNSUPPORTED("svc #0x00")
+ TEST_UNSUPPORTED("svc #0xff")
+
+ TEST_GROUP("Unconditional branch")
+
+ TEST_BF( "b 2f")
+ TEST_BB( "b 2b")
+ TEST_BF_X("b 2f", 0x400)
+ TEST_BB_X("b 2b", 0x400)
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("subs.n r0, r0")
+
+ verbose("\n");
+}
+
+
+void kprobe_thumb32_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Load/store multiple")
+
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+
+ TEST_P( "stmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}")
+ TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}")
+
+ TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}")
+ TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}")
+ TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}")
+
+ TEST_GROUP("Load/store double or exclusive, table branch")
+
+ TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]")
+ TEST( "ldrd r12, r14, [sp, #16]")
+ TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!")
+ TEST( "ldrd r14, r12, [sp, #16]!")
+ TEST_P( "ldrd r1, r0, [r",7, 24,"], #16")
+ TEST( "ldrd r7, r8, [sp], #-16")
+
+ TEST_X( "ldrd r12, r14, 3f",
+ ".align 3 \n\t"
+ "3: .word "__stringify(VAL1)" \n\t"
+ " .word "__stringify(VAL2))
+
+ TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]")
+
+ TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
+ TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
+ TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
+ TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16")
+ TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16")
+
+ TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbb [r",1,9f,", r",2,0,"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbh [r",1,9f, ", r",14,1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]")
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]")
+ TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]")
+
+ TEST_UNSUPPORTED("strexb r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexh r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexd r0, r1, [r2]")
+ TEST_UNSUPPORTED("ldrexb r0, [r1]")
+ TEST_UNSUPPORTED("ldrexh r0, [r1]")
+ TEST_UNSUPPORTED("ldrexd r0, [r1]")
+
+ TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
+
+#define _DATA_PROCESSING32_DNM(op,s,val) \
+ TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \
+ TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s" r7, r",8, VAL2,", #0x000af000")
+
+#define DATA_PROCESSING32_DNM(op,val) \
+ _DATA_PROCESSING32_DNM(op,"",val) \
+ _DATA_PROCESSING32_DNM(op,"s",val)
+
+#define DATA_PROCESSING32_NM(op,val) \
+ TEST_RR(op".w r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op" r",11,VAL1,", #0x00010001") \
+ TEST_R( op" r",0, VAL1,", #0xf5000000") \
+ TEST_R( op" r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING32_DM(op,s,val) \
+ TEST_R( op s".w r0, r",14, val, "") \
+ TEST_R( op s" r1, r",12, val, ", lsl #3") \
+ TEST_R( op s" r2, r",11, val, ", lsr #4") \
+ TEST_R( op s" r3, r",10, val, ", asr #5") \
+ TEST_R( op s" r4, r",9, N(val),", asr #6") \
+ TEST_R( op s" r5, r",8, val, ", ror #7") \
+ TEST_R( op s" r8, r",7,val, ", rrx") \
+ TEST( op s" r0, #0x00010001") \
+ TEST( op s" r11, #0xf5000000") \
+ TEST( op s" r7, #0x000af000") \
+ TEST( op s" r4, #0x00005a00")
+
+#define DATA_PROCESSING32_DM(op,val) \
+ _DATA_PROCESSING32_DM(op,"",val) \
+ _DATA_PROCESSING32_DM(op,"s",val)
+
+ DATA_PROCESSING32_DNM("and",0xf00f00ff)
+ DATA_PROCESSING32_NM("tst",0xf00f00ff)
+ DATA_PROCESSING32_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING32_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING32_DM("mov",VAL2)
+ DATA_PROCESSING32_DNM("orn",0xf00f00ff)
+ DATA_PROCESSING32_DM("mvn",VAL2)
+ DATA_PROCESSING32_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING32_NM("teq",0xf00f00ff)
+ DATA_PROCESSING32_DNM("add",VAL2)
+ DATA_PROCESSING32_NM("cmn",VAL2)
+ DATA_PROCESSING32_DNM("adc",VAL2)
+ DATA_PROCESSING32_DNM("sbc",VAL2)
+ DATA_PROCESSING32_DNM("sub",VAL2)
+ DATA_PROCESSING32_NM("cmp",VAL2)
+ DATA_PROCESSING32_DNM("rsb",VAL2)
+
+ TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc")
+ TEST_P("cmn.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7")
+ TEST( "cmn sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc")
+ TEST_P("cmp.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7")
+ TEST( "cmp sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008")
+
+ TEST_R("add.w r0, sp, r",1, 4,"")
+ TEST_R("adds r0, sp, r",1, 4,", asl #3")
+ TEST_R("add r0, sp, r",1, 4,", asl #4")
+ TEST_R("add r0, sp, r",1, 16,", ror #1")
+ TEST_R("add.w sp, sp, r",1, 4,"")
+ TEST_R("add sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1")
+ TEST( "add.w r0, sp, #24")
+ TEST( "add.w sp, sp, #24")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp")
+
+ TEST_R("sub.w r0, sp, r",1, 4,"")
+ TEST_R("subs r0, sp, r",1, 4,", asl #3")
+ TEST_R("sub r0, sp, r",1, 4,", asl #4")
+ TEST_R("sub r0, sp, r",1, 16,", ror #1")
+ TEST_R("sub.w sp, sp, r",1, 4,"")
+ TEST_R("sub sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1")
+ TEST( "sub.w r0, sp, #24")
+ TEST( "sub.w sp, sp, #24")
+
+ TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp")
+ TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3")
+ TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp")
+ TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3")
+ TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb20,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb80,0x0000")
+ TEST_UNSUPPORTED(".short 0xebe0,0x0000")
+
+ TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf120,0x0000")
+ TEST_UNSUPPORTED(".short 0xf180,0x0000")
+ TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xec00,0x0000")
+ TEST_UNSUPPORTED(".short 0xeff0,0x0000")
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+
+ TEST_GROUP("Data-processing (plain binary immediate)")
+
+ TEST_R("addw r0, r",1, VAL1,", #0x123")
+ TEST( "addw r14, sp, #0xf5a")
+ TEST( "addw sp, sp, #0x20")
+ TEST( "addw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120")
+
+ TEST_R("subw r0, r",1, VAL1,", #0x123")
+ TEST( "subw r14, sp, #0xf5a")
+ TEST( "subw sp, sp, #0x20")
+ TEST( "subw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120")
+
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0")
+ TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0")
+
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0")
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfc r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31")
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20")
+
+ TEST_GROUP("Branches and miscellaneous control")
+
+CONDITION_INSTRUCTIONS(22,
+ TEST_BF("beq.w 2f")
+ TEST_BB("bne.w 2b")
+ TEST_BF("bgt.w 2f")
+ TEST_BB("blt.w 2b")
+ TEST_BF_X("bpl.w 2f",0x1000)
+)
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, r1")
+ TEST_UNSUPPORTED("msr spsr, r2")
+
+ TEST_UNSUPPORTED("cpsie.w i")
+ TEST_UNSUPPORTED("cpsid.w i")
+ TEST_UNSUPPORTED("cps 0x13")
+
+ TEST_SUPPORTED("yield.w")
+ TEST("sev.w")
+ TEST("nop.w")
+ TEST("wfi.w")
+ TEST_SUPPORTED("wfe.w")
+ TEST_UNSUPPORTED("dbg.w #0")
+
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+
+ TEST_UNSUPPORTED("bxj r0")
+
+ TEST_UNSUPPORTED("subs pc, lr, #4")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+
+ TEST_BF( "b.w 2f")
+ TEST_BB( "b.w 2b")
+ TEST_BF_X("b.w 2f", 0x1000)
+
+ TEST_BF( "bl.w 2f")
+ TEST_BB( "bl.w 2b")
+ TEST_BB_X("bl.w 2b", 0x1000)
+
+ TEST_X( "blx __dummy_arm_subroutine",
+ ".arm \n\t"
+ ".align \n\t"
+ ".type __dummy_arm_subroutine, %%function \n\t"
+ "__dummy_arm_subroutine: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".thumb \n\t"
+ )
+ TEST( "blx __dummy_arm_subroutine")
+
+ TEST_GROUP("Store single data item")
+
+#define SINGLE_STORE(size) \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \
+ TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \
+ TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \
+ TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \
+ TEST_UNSUPPORTED("str"size"t r0, [r1, #4]")
+
+ SINGLE_STORE("b")
+ SINGLE_STORE("h")
+ SINGLE_STORE("")
+
+ TEST("str sp, [sp]")
+ TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]")
+ TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]")
+
+ TEST_GROUP("Advanced SIMD element or structure load/store instructions")
+
+ TEST_UNSUPPORTED(".short 0xf900,0x0000")
+ TEST_UNSUPPORTED(".short 0xf92f,0xffff")
+ TEST_UNSUPPORTED(".short 0xf980,0x0000")
+ TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+
+ TEST_GROUP("Load single data item and memory hints")
+
+#define SINGLE_LOAD(size) \
+ TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \
+ TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #120") \
+ TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \
+ TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \
+ TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \
+ TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \
+ TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_X( "ldr"size".w r0, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL1)) \
+ TEST_X( "ldr"size".w r14, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL2)) \
+ TEST( "ldr"size".w r7, 3b") \
+ TEST( "ldr"size".w r7, [sp, #24]") \
+ TEST_P( "ldr"size".w r0, [r",0,0, "]") \
+ TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]")
+
+ SINGLE_LOAD("b")
+ SINGLE_LOAD("sb")
+ SINGLE_LOAD("h")
+ SINGLE_LOAD("sh")
+ SINGLE_LOAD("")
+
+ TEST_BF_P("ldr pc, [r",14, 15*4,"]")
+ TEST_P( "ldr sp, [r",14, 13*4,"]")
+ TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]")
+ TEST_R( "ldr sp, [sp, r",14, 13*4,"]")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+ TEST_SUPPORTED("ldr sp, 99f")
+ TEST_SUPPORTED("ldr pc, 99f")
+
+ TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f")
+ TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]")
+ TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]")
+
+ TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+
+ TEST( "pli [pc, #4]")
+ TEST( "pli [pc, #-4]")
+ TEST( "pld [pc, #4]")
+ TEST( "pld [pc, #-4]")
+
+ TEST_P( "pld [r",0,-1024,", #1024]")
+ TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]")
+ TEST_P( "pli [r",4, 0b,", #1024]")
+ TEST_P( "pld [r",7, 120,", #-120]")
+ TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]")
+ TEST_P( "pli [r",11,120,", #-120]")
+ TEST( "pld [sp, #0]")
+
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]")
+ TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]")
+ TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]");
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]")
+ TEST_R( "pld [sp, r",1, 16,"]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]")
+
+ TEST_GROUP("Data-processing (register)")
+
+#define SHIFTS32(op) \
+ TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \
+ TEST_RR(op" r14, r",12,VAL2,", r",11,10,"")
+
+ SHIFTS32("lsl")
+ SHIFTS32("lsls")
+ SHIFTS32("lsr")
+ SHIFTS32("lsrs")
+ SHIFTS32("asr")
+ SHIFTS32("asrs")
+ SHIFTS32("ror")
+ SHIFTS32("rors")
+
+ TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2")
+ TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp");
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
+ TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+
+#define PARALLEL_ADD_SUB(op) \
+ TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ PARALLEL_ADD_SUB("s")
+ PARALLEL_ADD_SUB("q")
+ PARALLEL_ADD_SUB("sh")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ PARALLEL_ADD_SUB("u")
+ PARALLEL_ADD_SUB("uq")
+ PARALLEL_ADD_SUB("uh")
+
+ TEST_GROUP("Miscellaneous operations")
+
+ TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"")
+
+ TEST_R("rev.w r0, r",0, VAL1,"")
+ TEST_R("rev r14, r",12, VAL2,"")
+ TEST_R("rev16.w r0, r",0, VAL1,"")
+ TEST_R("rev16 r14, r",12, VAL2,"")
+ TEST_R("rbit r0, r",0, VAL1,"")
+ TEST_R("rbit r14, r",12, VAL2,"")
+ TEST_R("revsh.w r0, r",0, VAL1,"")
+ TEST_R("revsh r14, r",12, VAL2,"")
+
+ TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12");
+ TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12");
+ TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc");
+ TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp");
+
+ TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clz r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+
+ TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+
+ TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9")
+ TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp");
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+
+ TEST_GROUP("Long multiply, long multiply accumulate, and divide")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp");
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xffff,0xffff")
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("sub.w r0, r0")
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
new file mode 100644
index 0000000..e17cdd6
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.c
@@ -0,0 +1,1748 @@
+/*
+ * arch/arm/kernel/kprobes-test.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains test code for ARM kprobes.
+ *
+ * The top level function run_all_tests() executes tests for all of the
+ * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
+ * fall into two categories; run_api_tests() checks basic functionality of the
+ * kprobes API, and run_test_cases() is a comprehensive test for kprobes
+ * instruction decoding and simulation.
+ *
+ * run_test_cases() first checks the kprobes decoding table for self consistency
+ * (using table_test()) then executes a series of test cases for each of the CPU
+ * instruction forms. coverage_start() and coverage_end() are used to verify
+ * that these test cases cover all of the possible combinations of instructions
+ * described by the kprobes decoding tables.
+ *
+ * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
+ * which use the macros defined in kprobes-test.h. The rest of this
+ * documentation will describe the operation of the framework used by these
+ * test cases.
+ */
+
+/*
+ * TESTING METHODOLOGY
+ * -------------------
+ *
+ * The methodology used to test an ARM instruction 'test_insn' is to use
+ * inline assembler like:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ *
+ * When the test case is run a kprobe is placed of each nop. The
+ * post-handler of the test_before probe is used to modify the saved CPU
+ * register context to that which we require for the test case. The
+ * pre-handler of the of the test_after probe saves a copy of the CPU
+ * register context. In this way we can execute test_insn with a specific
+ * register context and see the results afterwards.
+ *
+ * To actually test the kprobes instruction emulation we perform the above
+ * step a second time but with an additional kprobe on the test_case
+ * instruction itself. If the emulation is accurate then the results seen
+ * by the test_after probe will be identical to the first run which didn't
+ * have a probe on test_case.
+ *
+ * Each test case is run several times with a variety of variations in the
+ * flags value of stored in CPSR, and for Thumb code, different ITState.
+ *
+ * For instructions which can modify PC, a second test_after probe is used
+ * like this:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * b test_done
+ * test_after2: nop
+ * test_done:
+ *
+ * The test case is constructed such that test_insn branches to
+ * test_after2, or, if testing a conditional instruction, it may just
+ * continue to test_after. The probes inserted at both locations let us
+ * determine which happened. A similar approach is used for testing
+ * backwards branches...
+ *
+ * b test_before
+ * b test_done @ helps to cope with off by 1 branches
+ * test_after2: nop
+ * b test_done
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * test_done:
+ *
+ * The macros used to generate the assembler instructions describe above
+ * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
+ * (branch backwards). In these, the local variables numbered 1, 50, 2 and
+ * 99 represent: test_before, test_case, test_after2 and test_done.
+ *
+ * FRAMEWORK
+ * ---------
+ *
+ * Each test case is wrapped between the pair of macros TESTCASE_START and
+ * TESTCASE_END. As well as performing the inline assembler boilerplate,
+ * these call out to the kprobes_test_case_start() and
+ * kprobes_test_case_end() functions which drive the execution of the test
+ * case. The specific arguments to use for each test case are stored as
+ * inline data constructed using the various TEST_ARG_* macros. Putting
+ * this all together, a simple test case may look like:
+ *
+ * TESTCASE_START("Testing mov r0, r7")
+ * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
+ * TEST_ARG_END("")
+ * TEST_INSTRUCTION("mov r0, r7")
+ * TESTCASE_END
+ *
+ * Note, in practice the single convenience macro TEST_R would be used for this
+ * instead.
+ *
+ * The above would expand to assembler looking something like:
+ *
+ * @ TESTCASE_START
+ * bl __kprobes_test_case_start
+ * @ start of inline data...
+ * .ascii "mov r0, r7" @ text title for test case
+ * .byte 0
+ * .align 2
+ *
+ * @ TEST_ARG_REG
+ * .byte ARG_TYPE_REG
+ * .byte 7
+ * .short 0
+ * .word 0x1234567
+ *
+ * @ TEST_ARG_END
+ * .byte ARG_TYPE_END
+ * .byte TEST_ISA @ flags, including ISA being tested
+ * .short 50f-0f @ offset of 'test_before'
+ * .short 2f-0f @ offset of 'test_after2' (if relevent)
+ * .short 99f-0f @ offset of 'test_done'
+ * @ start of test case code...
+ * 0:
+ * .code TEST_ISA @ switch to ISA being tested
+ *
+ * @ TEST_INSTRUCTION
+ * 50: nop @ location for 'test_before' probe
+ * 1: mov r0, r7 @ the test case instruction 'test_insn'
+ * nop @ location for 'test_after' probe
+ *
+ * // TESTCASE_END
+ * 2:
+ * 99: bl __kprobes_test_case_end_##TEST_ISA
+ * .code NONMAL_ISA
+ *
+ * When the above is execute the following happens...
+ *
+ * __kprobes_test_case_start() is an assembler wrapper which sets up space
+ * for a stack buffer and calls the C function kprobes_test_case_start().
+ * This C function will do some initial processing of the inline data and
+ * setup some global state. It then inserts the test_before and test_after
+ * kprobes and returns a value which causes the assembler wrapper to jump
+ * to the start of the test case code, (local label '0').
+ *
+ * When the test case code executes, the test_before probe will be hit and
+ * test_before_post_handler will call setup_test_context(). This fills the
+ * stack buffer and CPU registers with a test pattern and then processes
+ * the test case arguments. In our example there is one TEST_ARG_REG which
+ * indicates that R7 should be loaded with the value 0x12345678.
+ *
+ * When the test_before probe ends, the test case continues and executes
+ * the "mov r0, r7" instruction. It then hits the test_after probe and the
+ * pre-handler for this (test_after_pre_handler) will save a copy of the
+ * CPU register context. This should now have R0 holding the same value as
+ * R7.
+ *
+ * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
+ * an assembler wrapper which switches back to the ISA used by the test
+ * code and calls the C function kprobes_test_case_end().
+ *
+ * For each run through the test case, test_case_run_count is incremented
+ * by one. For even runs, kprobes_test_case_end() saves a copy of the
+ * register and stack buffer contents from the test case just run. It then
+ * inserts a kprobe on the test case instruction 'test_insn' and returns a
+ * value to cause the test case code to be re-run.
+ *
+ * For odd numbered runs, kprobes_test_case_end() compares the register and
+ * stack buffer contents to those that were saved on the previous even
+ * numbered run (the one without the kprobe on test_insn). These should be
+ * the same if the kprobe instruction simulation routine is correct.
+ *
+ * The pair of test case runs is repeated with different combinations of
+ * flag values in CPSR and, for Thumb, different ITState. This is
+ * controlled by test_context_cpsr().
+ *
+ * BUILDING TEST CASES
+ * -------------------
+ *
+ *
+ * As an aid to building test cases, the stack buffer is initialised with
+ * some special values:
+ *
+ * [SP+13*4] Contains SP+120. This can be used to test instructions
+ * which load a value into SP.
+ *
+ * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B},
+ * this holds the target address of the branch, 'test_after2'.
+ * This can be used to test instructions which load a PC value
+ * from memory.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+#include "kprobes-test.h"
+
+
+#define BENCHMARKING 1
+
+
+/*
+ * Test basic API
+ */
+
+static bool test_regs_ok;
+static int test_func_instance;
+static int pre_handler_called;
+static int post_handler_called;
+static int jprobe_func_called;
+static int kretprobe_handler_called;
+
+#define FUNC_ARG1 0x12345678
+#define FUNC_ARG2 0xabcdef
+
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+long arm_func(long r0, long r1);
+
+static void __used __naked __arm_kprobes_test_func(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ ".type arm_func, %%function \n\t"
+ "arm_func: \n\t"
+ "adds r0, r0, r1 \n\t"
+ "bx lr \n\t"
+ ".code "NORMAL_ISA /* Back to Thumb if necessary */
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+long thumb16_func(long r0, long r1);
+long thumb32even_func(long r0, long r1);
+long thumb32odd_func(long r0, long r1);
+
+static void __used __naked __thumb_kprobes_test_funcs(void)
+{
+ __asm__ __volatile__ (
+ ".type thumb16_func, %%function \n\t"
+ "thumb16_func: \n\t"
+ "adds.n r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ ".type thumb32even_func, %%function \n\t"
+ "thumb32even_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ "nop.n \n\t"
+ ".type thumb32odd_func, %%function \n\t"
+ "thumb32odd_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+
+static int call_test_func(long (*func)(long, long), bool check_test_regs)
+{
+ long ret;
+
+ ++test_func_instance;
+ test_regs_ok = false;
+
+ ret = (*func)(FUNC_ARG1, FUNC_ARG2);
+ if (ret != FUNC_ARG1 + FUNC_ARG2) {
+ pr_err("FAIL: call_test_func: func returned %lx\n", ret);
+ return false;
+ }
+
+ if (check_test_regs && !test_regs_ok) {
+ pr_err("FAIL: test regs not OK\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ pre_handler_called = test_func_instance;
+ if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ post_handler_called = test_func_instance;
+ if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
+ test_regs_ok = false;
+}
+
+static struct kprobe the_kprobe = {
+ .addr = 0,
+ .pre_handler = pre_handler,
+ .post_handler = post_handler
+};
+
+static int test_kprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kprobe.addr = (kprobe_opcode_t *)func;
+ ret = register_kprobe(&the_kprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kprobe(&the_kprobe);
+ the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (pre_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe pre_handler not called\n");
+ return -EINVAL;
+ }
+ if (post_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe post_handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (pre_handler_called == test_func_instance ||
+ post_handler_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __kprobes jprobe_func(long r0, long r1)
+{
+ jprobe_func_called = test_func_instance;
+ if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ jprobe_return();
+}
+
+static struct jprobe the_jprobe = {
+ .entry = jprobe_func,
+};
+
+static int test_jprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_jprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_jprobe(&the_jprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_jprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_jprobe(&the_jprobe);
+ the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (jprobe_func_called != test_func_instance) {
+ pr_err("FAIL: jprobe handler function not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __kprobes
+kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ kretprobe_handler_called = test_func_instance;
+ if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static struct kretprobe the_kretprobe = {
+ .handler = kretprobe_handler,
+};
+
+static int test_kretprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_kretprobe(&the_kretprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kretprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kretprobe(&the_kretprobe);
+ the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (kretprobe_handler_called != test_func_instance) {
+ pr_err("FAIL: kretprobe handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: kretprobe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int run_api_tests(long (*func)(long, long))
+{
+ int ret;
+
+ pr_info(" kprobe\n");
+ ret = test_kprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" jprobe\n");
+ ret = test_jprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" kretprobe\n");
+ ret = test_kretprobe(func);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+/*
+ * Benchmarking
+ */
+
+#if BENCHMARKING
+
+static void __naked benchmark_nop(void)
+{
+ __asm__ __volatile__ (
+ "nop \n\t"
+ "bx lr"
+ );
+}
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define wide ".w"
+#else
+#define wide
+#endif
+
+static void __naked benchmark_pushpop1(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r3-r11,lr} \n\t"
+ "ldmia"wide" sp!, {r3-r11,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop2(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0-r8,lr} \n\t"
+ "ldmia"wide" sp!, {r0-r8,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop3(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r4,lr} \n\t"
+ "ldmia"wide" sp!, {r4,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop4(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0,lr} \n\t"
+ "ldmia"wide" sp!, {r0,pc}"
+ );
+}
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+static void __naked benchmark_pushpop_thumb(void)
+{
+ __asm__ __volatile__ (
+ "push.n {r0-r7,lr} \n\t"
+ "pop.n {r0-r7,pc}"
+ );
+}
+
+#endif
+
+static int __kprobes
+benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ return 0;
+}
+
+static int benchmark(void(*fn)(void))
+{
+ unsigned n, i, t, t0;
+
+ for (n = 1000; ; n *= 2) {
+ t0 = sched_clock();
+ for (i = n; i > 0; --i)
+ fn();
+ t = sched_clock() - t0;
+ if (t >= 250000000)
+ break; /* Stop once we took more than 0.25 seconds */
+ }
+ return t / n; /* Time for one iteration in nanoseconds */
+};
+
+static int kprobe_benchmark(void(*fn)(void), unsigned offset)
+{
+ struct kprobe k = {
+ .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset),
+ .pre_handler = benchmark_pre_handler,
+ };
+
+ int ret = register_kprobe(&k);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = benchmark(fn);
+
+ unregister_kprobe(&k);
+ return ret;
+};
+
+struct benchmarks {
+ void (*fn)(void);
+ unsigned offset;
+ const char *title;
+};
+
+static int run_benchmarks(void)
+{
+ int ret;
+ struct benchmarks list[] = {
+ {&benchmark_nop, 0, "nop"},
+ /*
+ * benchmark_pushpop{1,3} will have the optimised
+ * instruction emulation, whilst benchmark_pushpop{2,4} will
+ * be the equivalent unoptimised instructions.
+ */
+ {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"},
+ {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"},
+ {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"},
+ {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"},
+ {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"},
+ {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"},
+ {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"},
+ {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"},
+#ifdef CONFIG_THUMB2_KERNEL
+ {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"},
+ {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"},
+#endif
+ {0}
+ };
+
+ struct benchmarks *b;
+ for (b = list; b->fn; ++b) {
+ ret = kprobe_benchmark(b->fn, b->offset);
+ if (ret < 0)
+ return ret;
+ pr_info(" %dns for kprobe %s\n", ret, b->title);
+ }
+
+ pr_info("\n");
+ return 0;
+}
+
+#endif /* BENCHMARKING */
+
+
+/*
+ * Decoding table self-consistency tests
+ */
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+ [DECODE_TYPE_TABLE] = sizeof(struct decode_table),
+ [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom),
+ [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate),
+ [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate),
+ [DECODE_TYPE_OR] = sizeof(struct decode_or),
+ [DECODE_TYPE_REJECT] = sizeof(struct decode_reject)
+};
+
+static int table_iter(const union decode_item *table,
+ int (*fn)(const struct decode_header *, void *),
+ void *args)
+{
+ const struct decode_header *h = (struct decode_header *)table;
+ int result;
+
+ for (;;) {
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (type == DECODE_TYPE_END)
+ return 0;
+
+ result = fn(h, args);
+ if (result)
+ return result;
+
+ h = (struct decode_header *)
+ ((uintptr_t)h + decode_struct_sizes[type]);
+
+ }
+}
+
+static int table_test_fail(const struct decode_header *h, const char* message)
+{
+
+ pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
+ message, h->mask.bits, h->value.bits);
+ return -EINVAL;
+}
+
+struct table_test_args {
+ const union decode_item *root_table;
+ u32 parent_mask;
+ u32 parent_value;
+};
+
+static int table_test_fn(const struct decode_header *h, void *args)
+{
+ struct table_test_args *a = (struct table_test_args *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (h->value.bits & ~h->mask.bits)
+ return table_test_fail(h, "Match value has bits not in mask");
+
+ if ((h->mask.bits & a->parent_mask) != a->parent_mask)
+ return table_test_fail(h, "Mask has bits not in parent mask");
+
+ if ((h->value.bits ^ a->parent_value) & a->parent_mask)
+ return table_test_fail(h, "Value is inconsistent with parent");
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ struct table_test_args args2 = *a;
+ args2.parent_mask = h->mask.bits;
+ args2.parent_value = h->value.bits;
+ return table_iter(d->table.table, table_test_fn, &args2);
+ }
+
+ return 0;
+}
+
+static int table_test(const union decode_item *table)
+{
+ struct table_test_args args = {
+ .root_table = table,
+ .parent_mask = 0,
+ .parent_value = 0
+ };
+ return table_iter(args.root_table, table_test_fn, &args);
+}
+
+
+/*
+ * Decoding table test coverage analysis
+ *
+ * coverage_start() builds a coverage_table which contains a list of
+ * coverage_entry's to match each entry in the specified kprobes instruction
+ * decoding table.
+ *
+ * When test cases are run, coverage_add() is called to process each case.
+ * This looks up the corresponding entry in the coverage_table and sets it as
+ * being matched, as well as clearing the regs flag appropriate for the test.
+ *
+ * After all test cases have been run, coverage_end() is called to check that
+ * all entries in coverage_table have been matched and that all regs flags are
+ * cleared. I.e. that all possible combinations of instructions described by
+ * the kprobes decoding tables have had a test case executed for them.
+ */
+
+bool coverage_fail;
+
+#define MAX_COVERAGE_ENTRIES 256
+
+struct coverage_entry {
+ const struct decode_header *header;
+ unsigned regs;
+ unsigned nesting;
+ char matched;
+};
+
+struct coverage_table {
+ struct coverage_entry *base;
+ unsigned num_entries;
+ unsigned nesting;
+};
+
+struct coverage_table coverage;
+
+#define COVERAGE_ANY_REG (1<<0)
+#define COVERAGE_SP (1<<1)
+#define COVERAGE_PC (1<<2)
+#define COVERAGE_PCWB (1<<3)
+
+static const char coverage_register_lookup[16] = {
+ [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG,
+ [REG_TYPE_SP] = COVERAGE_SP,
+ [REG_TYPE_PC] = COVERAGE_PC,
+ [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP,
+ [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC,
+ [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
+ [REG_TYPE_NOPCX] = COVERAGE_ANY_REG,
+ [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP,
+};
+
+unsigned coverage_start_registers(const struct decode_header *h)
+{
+ unsigned regs = 0;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
+ regs |= coverage_register_lookup[r] << i;
+ }
+ return regs;
+}
+
+static int coverage_start_fn(const struct decode_header *h, void *args)
+{
+ struct coverage_table *coverage = (struct coverage_table *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+ struct coverage_entry *entry = coverage->base + coverage->num_entries;
+
+ if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
+ pr_err("FAIL: Out of space for test coverage data");
+ return -ENOMEM;
+ }
+
+ ++coverage->num_entries;
+
+ entry->header = h;
+ entry->regs = coverage_start_registers(h);
+ entry->nesting = coverage->nesting;
+ entry->matched = false;
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ int ret;
+ ++coverage->nesting;
+ ret = table_iter(d->table.table, coverage_start_fn, coverage);
+ --coverage->nesting;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int coverage_start(const union decode_item *table)
+{
+ coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
+ sizeof(struct coverage_entry), GFP_KERNEL);
+ coverage.num_entries = 0;
+ coverage.nesting = 0;
+ return table_iter(table, coverage_start_fn, &coverage);
+}
+
+static void
+coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
+{
+ int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ enum decode_reg_type reg_type = (regs >> i) & 0xf;
+ int reg = (insn >> i) & 0xf;
+ int flag;
+
+ if (!reg_type)
+ continue;
+
+ if (reg == 13)
+ flag = COVERAGE_SP;
+ else if (reg == 15)
+ flag = COVERAGE_PC;
+ else
+ flag = COVERAGE_ANY_REG;
+ entry->regs &= ~(flag << i);
+
+ switch (reg_type) {
+
+ case REG_TYPE_NONE:
+ case REG_TYPE_ANY:
+ case REG_TYPE_SAMEAS16:
+ break;
+
+ case REG_TYPE_SP:
+ if (reg != 13)
+ return;
+ break;
+
+ case REG_TYPE_PC:
+ if (reg != 15)
+ return;
+ break;
+
+ case REG_TYPE_NOSP:
+ if (reg == 13)
+ return;
+ break;
+
+ case REG_TYPE_NOSPPC:
+ case REG_TYPE_NOSPPCX:
+ if (reg == 13 || reg == 15)
+ return;
+ break;
+
+ case REG_TYPE_NOPCWB:
+ if (!is_writeback(insn))
+ break;
+ if (reg == 15) {
+ entry->regs &= ~(COVERAGE_PCWB << i);
+ return;
+ }
+ break;
+
+ case REG_TYPE_NOPC:
+ case REG_TYPE_NOPCX:
+ if (reg == 15)
+ return;
+ break;
+ }
+
+ }
+}
+
+static void coverage_add(kprobe_opcode_t insn)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+ bool matched = false;
+ unsigned nesting = 0;
+
+ for (; entry < end; ++entry) {
+ const struct decode_header *h = entry->header;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (entry->nesting > nesting)
+ continue; /* Skip sub-table we didn't match */
+
+ if (entry->nesting < nesting)
+ break; /* End of sub-table we were scanning */
+
+ if (!matched) {
+ if ((insn & h->mask.bits) != h->value.bits)
+ continue;
+ entry->matched = true;
+ }
+
+ switch (type) {
+
+ case DECODE_TYPE_TABLE:
+ ++nesting;
+ break;
+
+ case DECODE_TYPE_CUSTOM:
+ case DECODE_TYPE_SIMULATE:
+ case DECODE_TYPE_EMULATE:
+ coverage_add_registers(entry, insn);
+ return;
+
+ case DECODE_TYPE_OR:
+ matched = true;
+ break;
+
+ case DECODE_TYPE_REJECT:
+ default:
+ return;
+ }
+
+ }
+}
+
+static void coverage_end(void)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+
+ for (; entry < end; ++entry) {
+ u32 mask = entry->header->mask.bits;
+ u32 value = entry->header->value.bits;
+
+ if (entry->regs) {
+ pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
+ mask, value, entry->regs);
+ coverage_fail = true;
+ }
+ if (!entry->matched) {
+ pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
+ mask, value);
+ coverage_fail = true;
+ }
+ }
+
+ kfree(coverage.base);
+}
+
+
+/*
+ * Framework for instruction set test cases
+ */
+
+void __naked __kprobes_test_case_start(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r4-r11} \n\t"
+ "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "bic r0, lr, #1 @ r0 = inline title string \n\t"
+ "mov r1, sp \n\t"
+ "bl kprobes_test_case_start \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "movne pc, r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "mov pc, r0 \n\t"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+void __naked __kprobes_test_case_end_16(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "bxne r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ "orr lr, lr, #1 @ will return to Thumb code \n\t"
+ "ldr pc, 1f \n\t"
+ "1: \n\t"
+ ".word __kprobes_test_case_end_16 \n\t"
+ );
+}
+
+#endif
+
+
+int kprobe_test_flags;
+int kprobe_test_cc_position;
+
+static int test_try_count;
+static int test_pass_count;
+static int test_fail_count;
+
+static struct pt_regs initial_regs;
+static struct pt_regs expected_regs;
+static struct pt_regs result_regs;
+
+static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
+
+static const char *current_title;
+static struct test_arg *current_args;
+static u32 *current_stack;
+static uintptr_t current_branch_target;
+
+static uintptr_t current_code_start;
+static kprobe_opcode_t current_instruction;
+
+
+#define TEST_CASE_PASSED -1
+#define TEST_CASE_FAILED -2
+
+static int test_case_run_count;
+static bool test_case_is_thumb;
+static int test_instance;
+
+/*
+ * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
+ * can change randomly as the kernel doesn't take care to preserve or initialise
+ * this across context switches. Also, with Security Extentions, the flag may
+ * not be under control of the kernel; for this reason we ignore the state of
+ * the FIQ disable flag CPSR.F as well.
+ */
+#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
+
+static unsigned long test_check_cc(int cc, unsigned long cpsr)
+{
+ unsigned long temp;
+
+ switch (cc) {
+ case 0x0: /* eq */
+ return cpsr & PSR_Z_BIT;
+
+ case 0x1: /* ne */
+ return (~cpsr) & PSR_Z_BIT;
+
+ case 0x2: /* cs */
+ return cpsr & PSR_C_BIT;
+
+ case 0x3: /* cc */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0x4: /* mi */
+ return cpsr & PSR_N_BIT;
+
+ case 0x5: /* pl */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0x6: /* vs */
+ return cpsr & PSR_V_BIT;
+
+ case 0x7: /* vc */
+ return (~cpsr) & PSR_V_BIT;
+
+ case 0x8: /* hi */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+
+ case 0x9: /* ls */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0xa: /* ge */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0xb: /* lt */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+
+ case 0xc: /* gt */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+
+ case 0xd: /* le */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+
+ case 0xe: /* al */
+ case 0xf: /* unconditional */
+ return true;
+ }
+ BUG();
+ return false;
+}
+
+static int is_last_scenario;
+static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
+static int memory_needs_checking;
+
+static unsigned long test_context_cpsr(int scenario)
+{
+ unsigned long cpsr;
+
+ probe_should_run = 1;
+
+ /* Default case is that we cycle through 16 combinations of flags */
+ cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */
+ cpsr |= (scenario & 0xf) << 16; /* GE flags */
+ cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
+
+ if (!test_case_is_thumb) {
+ /* Testing ARM code */
+ probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
+ /* Testing Thumb code without setting ITSTATE */
+ if (kprobe_test_cc_position) {
+ int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
+ }
+
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
+ /* Testing Thumb code with all combinations of ITSTATE */
+ unsigned x = (scenario >> 4);
+ unsigned cond_base = x % 7; /* ITSTATE<7:5> */
+ unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */
+
+ if (mask > 0x1f) {
+ /* Finish by testing state from instruction 'itt al' */
+ cond_base = 7;
+ mask = 0x4;
+ if ((scenario & 0xf) == 0xf)
+ is_last_scenario = true;
+ }
+
+ cpsr |= cond_base << 13; /* ITSTATE<7:5> */
+ cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */
+ cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */
+ cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */
+ cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */
+ cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */
+
+ probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
+
+ } else {
+ /* Testing Thumb code with several combinations of ITSTATE */
+ switch (scenario) {
+ case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
+ cpsr = 0x00000800;
+ probe_should_run = 0;
+ break;
+ case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
+ cpsr = 0xf0007800;
+ probe_should_run = 0;
+ break;
+ case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
+ cpsr = 0x00009800;
+ break;
+ case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
+ cpsr = 0xf0002800;
+ is_last_scenario = true;
+ break;
+ }
+ }
+
+ return cpsr;
+}
+
+static void setup_test_context(struct pt_regs *regs)
+{
+ int scenario = test_case_run_count>>1;
+ unsigned long val;
+ struct test_arg *args;
+ int i;
+
+ is_last_scenario = false;
+ memory_needs_checking = false;
+
+ /* Initialise test memory on stack */
+ val = (scenario & 1) ? VALM : ~VALM;
+ for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
+ current_stack[i] = val + (i << 8);
+ /* Put target of branch on stack for tests which load PC from memory */
+ if (current_branch_target)
+ current_stack[15] = current_branch_target;
+ /* Put a value for SP on stack for tests which load SP from memory */
+ current_stack[13] = (u32)current_stack + 120;
+
+ /* Initialise register values to their default state */
+ val = (scenario & 2) ? VALR : ~VALR;
+ for (i = 0; i < 13; ++i)
+ regs->uregs[i] = val ^ (i << 8);
+ regs->ARM_lr = val ^ (14 << 8);
+ regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
+ regs->ARM_cpsr |= test_context_cpsr(scenario);
+
+ /* Perform testcase specific register setup */
+ args = current_args;
+ for (; args[0].type != ARG_TYPE_END; ++args)
+ switch (args[0].type) {
+ case ARG_TYPE_REG: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] = arg->val;
+ break;
+ }
+ case ARG_TYPE_PTR: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] =
+ (unsigned long)current_stack + arg->val;
+ memory_needs_checking = true;
+ break;
+ }
+ case ARG_TYPE_MEM: {
+ struct test_arg_mem *arg = (struct test_arg_mem *)args;
+ current_stack[arg->index] = arg->val;
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+struct test_probe {
+ struct kprobe kprobe;
+ bool registered;
+ int hit;
+};
+
+static void unregister_test_probe(struct test_probe *probe)
+{
+ if (probe->registered) {
+ unregister_kprobe(&probe->kprobe);
+ probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
+ }
+ probe->registered = false;
+}
+
+static int register_test_probe(struct test_probe *probe)
+{
+ int ret;
+
+ if (probe->registered)
+ BUG();
+
+ ret = register_kprobe(&probe->kprobe);
+ if (ret >= 0) {
+ probe->registered = true;
+ probe->hit = -1;
+ }
+ return ret;
+}
+
+static int __kprobes
+test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static void __kprobes
+test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ setup_test_context(regs);
+ initial_regs = *regs;
+ initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+}
+
+static int __kprobes
+test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static int __kprobes
+test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
+ return 0; /* Already run for this test instance */
+
+ result_regs = *regs;
+ result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+
+ /* Undo any changes done to SP by the test case */
+ regs->ARM_sp = (unsigned long)current_stack;
+
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static struct test_probe test_before_probe = {
+ .kprobe.pre_handler = test_before_pre_handler,
+ .kprobe.post_handler = test_before_post_handler,
+};
+
+static struct test_probe test_case_probe = {
+ .kprobe.pre_handler = test_case_pre_handler,
+};
+
+static struct test_probe test_after_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static struct test_probe test_after2_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static void test_case_cleanup(void)
+{
+ unregister_test_probe(&test_before_probe);
+ unregister_test_probe(&test_case_probe);
+ unregister_test_probe(&test_after_probe);
+ unregister_test_probe(&test_after2_probe);
+}
+
+static void print_registers(struct pt_regs *regs)
+{
+ pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n",
+ regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+ pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n",
+ regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
+ pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n",
+ regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
+ pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n",
+ regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
+ pr_err("cpsr %08lx\n", regs->ARM_cpsr);
+}
+
+static void print_memory(u32 *mem, size_t size)
+{
+ int i;
+ for (i = 0; i < size / sizeof(u32); i += 4)
+ pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
+ mem[i+2], mem[i+3]);
+}
+
+static size_t expected_memory_size(u32 *sp)
+{
+ size_t size = sizeof(expected_memory);
+ int offset = (uintptr_t)sp - (uintptr_t)current_stack;
+ if (offset > 0)
+ size -= offset;
+ return size;
+}
+
+static void test_case_failed(const char *message)
+{
+ test_case_cleanup();
+
+ pr_err("FAIL: %s\n", message);
+ pr_err("FAIL: Test %s\n", current_title);
+ pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
+}
+
+static unsigned long next_instruction(unsigned long pc)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+ return pc + 2;
+ else
+#endif
+ return pc + 4;
+}
+
+static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+{
+ struct test_arg *args;
+ struct test_arg_end *end_arg;
+ unsigned long test_code;
+
+ args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+
+ current_title = title;
+ current_args = args;
+ current_stack = stack;
+
+ ++test_try_count;
+
+ while (args->type != ARG_TYPE_END)
+ ++args;
+ end_arg = (struct test_arg_end *)args;
+
+ test_code = (unsigned long)(args + 1); /* Code starts after args */
+
+ test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
+ if (test_case_is_thumb)
+ test_code |= 1;
+
+ current_code_start = test_code;
+
+ current_branch_target = 0;
+ if (end_arg->branch_offset != end_arg->end_offset)
+ current_branch_target = test_code + end_arg->branch_offset;
+
+ test_code += end_arg->code_offset;
+ test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ test_code = next_instruction(test_code);
+ test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (test_case_is_thumb) {
+ u16 *p = (u16 *)(test_code & ~1);
+ current_instruction = p[0];
+ if (is_wide_instruction(current_instruction)) {
+ current_instruction <<= 16;
+ current_instruction |= p[1];
+ }
+ } else {
+ current_instruction = *(u32 *)test_code;
+ }
+
+ if (current_title[0] == '.')
+ verbose("%s\n", current_title);
+ else
+ verbose("%s\t@ %0*x\n", current_title,
+ test_case_is_thumb ? 4 : 8,
+ current_instruction);
+
+ test_code = next_instruction(test_code);
+ test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
+ if (!test_case_is_thumb ||
+ is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 16-bit instruction");
+ goto fail;
+ }
+ } else {
+ if (test_case_is_thumb &&
+ !is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 32-bit instruction");
+ goto fail;
+ }
+ }
+
+ coverage_add(current_instruction);
+
+ if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
+ if (register_test_probe(&test_case_probe) < 0)
+ goto pass;
+ test_case_failed("registered probe for unsupported instruction");
+ goto fail;
+ }
+
+ if (end_arg->flags & ARG_FLAG_SUPPORTED) {
+ if (register_test_probe(&test_case_probe) >= 0)
+ goto pass;
+ test_case_failed("couldn't register probe for supported instruction");
+ goto fail;
+ }
+
+ if (register_test_probe(&test_before_probe) < 0) {
+ test_case_failed("register test_before_probe failed");
+ goto fail;
+ }
+ if (register_test_probe(&test_after_probe) < 0) {
+ test_case_failed("register test_after_probe failed");
+ goto fail;
+ }
+ if (current_branch_target) {
+ test_after2_probe.kprobe.addr =
+ (kprobe_opcode_t *)current_branch_target;
+ if (register_test_probe(&test_after2_probe) < 0) {
+ test_case_failed("register test_after2_probe failed");
+ goto fail;
+ }
+ }
+
+ /* Start first run of test case */
+ test_case_run_count = 0;
+ ++test_instance;
+ return current_code_start;
+pass:
+ test_case_run_count = TEST_CASE_PASSED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+fail:
+ test_case_run_count = TEST_CASE_FAILED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+}
+
+static bool check_test_results(void)
+{
+ size_t mem_size = 0;
+ u32 *mem = 0;
+
+ if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
+ test_case_failed("registers differ");
+ goto fail;
+ }
+
+ if (memory_needs_checking) {
+ mem = (u32 *)result_regs.ARM_sp;
+ mem_size = expected_memory_size(mem);
+ if (memcmp(expected_memory, mem, mem_size)) {
+ test_case_failed("test memory differs");
+ goto fail;
+ }
+ }
+
+ return true;
+
+fail:
+ pr_err("initial_regs:\n");
+ print_registers(&initial_regs);
+ pr_err("expected_regs:\n");
+ print_registers(&expected_regs);
+ pr_err("result_regs:\n");
+ print_registers(&result_regs);
+
+ if (mem) {
+ pr_err("current_stack=%p\n", current_stack);
+ pr_err("expected_memory:\n");
+ print_memory(expected_memory, mem_size);
+ pr_err("result_memory:\n");
+ print_memory(mem, mem_size);
+ }
+
+ return false;
+}
+
+static uintptr_t __used kprobes_test_case_end(void)
+{
+ if (test_case_run_count < 0) {
+ if (test_case_run_count == TEST_CASE_PASSED)
+ /* kprobes_test_case_start did all the needed testing */
+ goto pass;
+ else
+ /* kprobes_test_case_start failed */
+ goto fail;
+ }
+
+ if (test_before_probe.hit != test_instance) {
+ test_case_failed("test_before_handler not run");
+ goto fail;
+ }
+
+ if (test_after_probe.hit != test_instance &&
+ test_after2_probe.hit != test_instance) {
+ test_case_failed("test_after_handler not run");
+ goto fail;
+ }
+
+ /*
+ * Even numbered test runs ran without a probe on the test case so
+ * we can gather reference results. The subsequent odd numbered run
+ * will have the probe inserted.
+ */
+ if ((test_case_run_count & 1) == 0) {
+ /* Save results from run without probe */
+ u32 *mem = (u32 *)result_regs.ARM_sp;
+ expected_regs = result_regs;
+ memcpy(expected_memory, mem, expected_memory_size(mem));
+
+ /* Insert probe onto test case instruction */
+ if (register_test_probe(&test_case_probe) < 0) {
+ test_case_failed("register test_case_probe failed");
+ goto fail;
+ }
+ } else {
+ /* Check probe ran as expected */
+ if (probe_should_run == 1) {
+ if (test_case_probe.hit != test_instance) {
+ test_case_failed("test_case_handler not run");
+ goto fail;
+ }
+ } else if (probe_should_run == 0) {
+ if (test_case_probe.hit == test_instance) {
+ test_case_failed("test_case_handler ran");
+ goto fail;
+ }
+ }
+
+ /* Remove probe for any subsequent reference run */
+ unregister_test_probe(&test_case_probe);
+
+ if (!check_test_results())
+ goto fail;
+
+ if (is_last_scenario)
+ goto pass;
+ }
+
+ /* Do next test run */
+ ++test_case_run_count;
+ ++test_instance;
+ return current_code_start;
+fail:
+ ++test_fail_count;
+ goto end;
+pass:
+ ++test_pass_count;
+end:
+ test_case_cleanup();
+ return 0;
+}
+
+
+/*
+ * Top level test functions
+ */
+
+static int run_test_cases(void (*tests)(void), const union decode_item *table)
+{
+ int ret;
+
+ pr_info(" Check decoding tables\n");
+ ret = table_test(table);
+ if (ret)
+ return ret;
+
+ pr_info(" Run test cases\n");
+ ret = coverage_start(table);
+ if (ret)
+ return ret;
+
+ tests();
+
+ coverage_end();
+ return 0;
+}
+
+
+static int __init run_all_tests(void)
+{
+ int ret = 0;
+
+ pr_info("Begining kprobe tests...\n");
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+ pr_info("Probe ARM code\n");
+ ret = run_api_tests(arm_func);
+ if (ret)
+ goto out;
+
+ pr_info("ARM instruction simulation\n");
+ ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+ if (ret)
+ goto out;
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+ pr_info("Probe 16-bit Thumb code\n");
+ ret = run_api_tests(thumb16_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, even halfword\n");
+ ret = run_api_tests(thumb32even_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, odd halfword\n");
+ ret = run_api_tests(thumb32odd_func);
+ if (ret)
+ goto out;
+
+ pr_info("16-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb16_test_cases,
+ kprobe_decode_thumb16_table);
+ if (ret)
+ goto out;
+
+ pr_info("32-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb32_test_cases,
+ kprobe_decode_thumb32_table);
+ if (ret)
+ goto out;
+#endif
+
+ pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
+ test_try_count, test_pass_count, test_fail_count);
+ if (test_fail_count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+#if BENCHMARKING
+ pr_info("Benchmarks\n");
+ ret = run_benchmarks();
+ if (ret)
+ goto out;
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ /* We are able to run all test cases so coverage should be complete */
+ if (coverage_fail) {
+ pr_err("FAIL: Test coverage checks failed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+#endif
+
+out:
+ if (ret == 0)
+ pr_info("Finished kprobe tests OK\n");
+ else
+ pr_err("kprobe tests failed\n");
+
+ return ret;
+}
+
+
+/*
+ * Module setup
+ */
+
+#ifdef MODULE
+
+static void __exit kprobe_test_exit(void)
+{
+}
+
+module_init(run_all_tests)
+module_exit(kprobe_test_exit)
+MODULE_LICENSE("GPL");
+
+#else /* !MODULE */
+
+late_initcall(run_all_tests);
+
+#endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
new file mode 100644
index 0000000..0dc5d77
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.h
@@ -0,0 +1,392 @@
+/*
+ * arch/arm/kernel/kprobes-test.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VERBOSE 0 /* Set to '1' for more logging of test cases */
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define NORMAL_ISA "16"
+#else
+#define NORMAL_ISA "32"
+#endif
+
+
+/* Flags used in kprobe_test_flags */
+#define TEST_FLAG_NO_ITBLOCK (1<<0)
+#define TEST_FLAG_FULL_ITBLOCK (1<<1)
+#define TEST_FLAG_NARROW_INSTR (1<<2)
+
+extern int kprobe_test_flags;
+extern int kprobe_test_cc_position;
+
+
+#define TEST_MEMORY_SIZE 256
+
+
+/*
+ * Test case structures.
+ *
+ * The arguments given to test cases can be one of three types.
+ *
+ * ARG_TYPE_REG
+ * Load a register with the given value.
+ *
+ * ARG_TYPE_PTR
+ * Load a register with a pointer into the stack buffer (SP + given value).
+ *
+ * ARG_TYPE_MEM
+ * Store the given value into the stack buffer at [SP+index].
+ *
+ */
+
+#define ARG_TYPE_END 0
+#define ARG_TYPE_REG 1
+#define ARG_TYPE_PTR 2
+#define ARG_TYPE_MEM 3
+
+#define ARG_FLAG_UNSUPPORTED 0x01
+#define ARG_FLAG_SUPPORTED 0x02
+#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */
+#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */
+
+struct test_arg {
+ u8 type; /* ARG_TYPE_x */
+ u8 _padding[7];
+};
+
+struct test_arg_regptr {
+ u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */
+ u8 reg;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_mem {
+ u8 type; /* ARG_TYPE_MEM */
+ u8 index;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_end {
+ u8 type; /* ARG_TYPE_END */
+ u8 flags; /* ARG_FLAG_x */
+ u16 code_offset;
+ u16 branch_offset;
+ u16 end_offset;
+};
+
+
+/*
+ * Building blocks for test cases.
+ *
+ * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
+ *
+ * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
+ * used followed by a terminating TEST_ARG_END.
+ *
+ * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
+ * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
+ *
+ * Some specific test cases may make use of other custom constructs.
+ */
+
+#if VERBOSE
+#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
+#else
+#define verbose(fmt, ...)
+#endif
+
+#define TEST_GROUP(title) \
+ verbose("\n"); \
+ verbose(title"\n"); \
+ verbose("---------------------------------------------------------\n");
+
+#define TESTCASE_START(title) \
+ __asm__ __volatile__ ( \
+ "bl __kprobes_test_case_start \n\t" \
+ /* don't use .asciz here as 'title' may be */ \
+ /* multiple strings to be concatenated. */ \
+ ".ascii "#title" \n\t" \
+ ".byte 0 \n\t" \
+ ".align 2 \n\t"
+
+#define TEST_ARG_REG(reg, val) \
+ ".byte "__stringify(ARG_TYPE_REG)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_PTR(reg, val) \
+ ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_MEM(index, val) \
+ ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \
+ ".byte "#index" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_END(flags) \
+ ".byte "__stringify(ARG_TYPE_END)" \n\t" \
+ ".byte "TEST_ISA flags" \n\t" \
+ ".short 50f-0f \n\t" \
+ ".short 2f-0f \n\t" \
+ ".short 99f-0f \n\t" \
+ ".code "TEST_ISA" \n\t" \
+ "0: \n\t"
+
+#define TEST_INSTRUCTION(instruction) \
+ "50: nop \n\t" \
+ "1: "instruction" \n\t" \
+ " nop \n\t"
+
+#define TEST_BRANCH_F(instruction, xtra_dist) \
+ TEST_INSTRUCTION(instruction) \
+ ".if "#xtra_dist" \n\t" \
+ " b 99f \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t"
+
+#define TEST_BRANCH_B(instruction, xtra_dist) \
+ " b 50f \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t" \
+ " b 99f \n\t" \
+ ".if "#xtra_dist" \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ TEST_INSTRUCTION(instruction)
+
+#define TESTCASE_END \
+ "2: \n\t" \
+ "99: \n\t" \
+ " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \
+ ".code "NORMAL_ISA" \n\t" \
+ : : \
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \
+ );
+
+
+/*
+ * Macros to define test cases.
+ *
+ * Those of the form TEST_{R,P,M}* can be used to define test cases
+ * which take combinations of the three basic types of arguments. E.g.
+ *
+ * TEST_R One register argument
+ * TEST_RR Two register arguments
+ * TEST_RPR A register, a pointer, then a register argument
+ *
+ * For testing instructions which may branch, there are macros TEST_BF_*
+ * and TEST_BB_* for branching forwards and backwards.
+ *
+ * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
+ * the just verify that a kprobe is or is not allowed on the given instruction.
+ */
+
+#define TEST(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_UNSUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_SUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg code2) \
+ TESTCASE_END
+
+#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_REG(reg4, val4) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TESTCASE_END
+
+#define TEST_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2) \
+ TESTCASE_END
+
+#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_PTR(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_BF_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2, 0) \
+ TESTCASE_END
+
+#define TEST_BF_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF(code) TEST_BF_X(code, 0)
+#define TEST_BB(code) TEST_BB_X(code, 0)
+
+#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
+#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
+
+#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
+ TESTCASE_END
+
+#define TEST_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RX(code1, reg, val, code2, codex) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg) code2) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+
+/* Various values used in test cases... */
+#define N(val) (val ^ 0xffffffff)
+#define VAL1 0x12345678
+#define VAL2 N(VAL1)
+#define VAL3 0xa5f801
+#define VAL4 N(VAL3)
+#define VALM 0x456789ab
+#define VALR 0xdeaddead
+#define HH1 0x0123fecb
+#define HH2 0xa9874567
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+void kprobe_thumb16_test_cases(void);
+void kprobe_thumb32_test_cases(void);
+#else
+void kprobe_arm_test_cases(void);
+#endif
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 902ca59..8f96ec7 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -943,6 +944,9 @@
*/
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
+#endif
static void __kprobes
t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
@@ -1423,6 +1427,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
+#endif
static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
{
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index a6aeda0..38945f7 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -413,6 +413,14 @@
DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+#ifdef CONFIG_THUMB2_KERNEL
+extern const union decode_item kprobe_decode_thumb16_table[];
+extern const union decode_item kprobe_decode_thumb32_table[];
+#else
+extern const union decode_item kprobe_decode_arm_table[];
+#endif
+
+
int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
const union decode_item *table, bool thumb16);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 53c9c26..e6e5d7c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,6 +12,7 @@
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
+#include <linux/bitmap.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -26,16 +27,8 @@
#include <asm/pmu.h>
#include <asm/stacktrace.h>
-static struct platform_device *pmu_device;
-
/*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
-static DEFINE_RAW_SPINLOCK(pmu_lock);
-
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
* another platform that supports more, we need to increase this to be the
* largest of all platforms.
*
@@ -43,62 +36,24 @@
* cycle counter CCNT + 31 events counters CNT0..30.
* Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
*/
-#define ARMPMU_MAX_HWEVENTS 33
+#define ARMPMU_MAX_HWEVENTS 32
-/* The events for a given CPU. */
-struct cpu_hw_events {
- /*
- * The events that are active on the CPU for the given index. Index 0
- * is reserved.
- */
- struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
- /*
- * A 1 bit for an index indicates that the counter is being used for
- * an event. A 0 means that the counter can be used.
- */
- unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-
- /*
- * A 1 bit for an index indicates that the counter is actively being
- * used.
- */
- unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-};
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-struct arm_pmu {
- enum arm_perf_pmu_ids id;
- const char *name;
- irqreturn_t (*handle_irq)(int irq_num, void *dev);
- void (*enable)(struct hw_perf_event *evt, int idx);
- void (*disable)(struct hw_perf_event *evt, int idx);
- int (*get_event_idx)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u32 (*read_counter)(int idx);
- void (*write_counter)(int idx, u32 val);
- void (*start)(void);
- void (*stop)(void);
- void (*reset)(void *);
- const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- const unsigned (*event_map)[PERF_COUNT_HW_MAX];
- u32 raw_event_mask;
- int num_events;
- u64 max_period;
-};
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
/* Set at runtime when we know what CPU type we are. */
-static const struct arm_pmu *armpmu;
+static struct arm_pmu *cpu_pmu;
enum arm_perf_pmu_ids
armpmu_get_pmu_id(void)
{
int id = -ENODEV;
- if (armpmu != NULL)
- id = armpmu->id;
+ if (cpu_pmu != NULL)
+ id = cpu_pmu->id;
return id;
}
@@ -109,8 +64,8 @@
{
int max_events = 0;
- if (armpmu != NULL)
- max_events = armpmu->num_events;
+ if (cpu_pmu != NULL)
+ max_events = cpu_pmu->num_events;
return max_events;
}
@@ -130,7 +85,11 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
static int
-armpmu_map_cache_event(u64 config)
+armpmu_map_cache_event(const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
@@ -146,7 +105,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
+ ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -155,23 +114,46 @@
}
static int
-armpmu_map_event(u64 config)
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
- int mapping = (*armpmu->event_map)[config];
- return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+ int mapping = (*event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
-armpmu_map_raw_event(u64 config)
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
- return (int)(config & armpmu->raw_event_mask);
+ return (int)(config & raw_event_mask);
}
-static int
+static int map_cpu_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask)
+{
+ u64 config = event->attr.config;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_HARDWARE:
+ return armpmu_map_event(event_map, config);
+ case PERF_TYPE_HW_CACHE:
+ return armpmu_map_cache_event(cache_map, config);
+ case PERF_TYPE_RAW:
+ return armpmu_map_raw_event(raw_event_mask, config);
+ }
+
+ return -ENOENT;
+}
+
+int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0;
@@ -202,11 +184,12 @@
return ret;
}
-static u64
+u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
again:
@@ -246,11 +229,9 @@
static void
armpmu_stop(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
@@ -266,11 +247,9 @@
static void
armpmu_start(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
@@ -293,16 +272,16 @@
static void
armpmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
WARN_ON(idx < 0);
- clear_bit(idx, cpuc->active_mask);
armpmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ hw_events->events[idx] = NULL;
+ clear_bit(idx, hw_events->used_mask);
perf_event_update_userpage(event);
}
@@ -310,7 +289,8 @@
static int
armpmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
@@ -318,7 +298,7 @@
perf_pmu_disable(event->pmu);
/* If we don't have a space for the counter then finish early. */
- idx = armpmu->get_event_idx(cpuc, hwc);
+ idx = armpmu->get_event_idx(hw_events, hwc);
if (idx < 0) {
err = idx;
goto out;
@@ -330,8 +310,7 @@
*/
event->hw.idx = idx;
armpmu->disable(hwc, idx);
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
@@ -345,25 +324,25 @@
return err;
}
-static struct pmu pmu;
-
static int
-validate_event(struct cpu_hw_events *cpuc,
+validate_event(struct pmu_hw_events *hw_events,
struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event fake_event = event->hw;
+ struct pmu *leader_pmu = event->group_leader->pmu;
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
- return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+ return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_pmu;
+ struct pmu_hw_events fake_pmu;
memset(&fake_pmu, 0, sizeof(fake_pmu));
@@ -383,110 +362,119 @@
static irqreturn_t armpmu_platform_irq(int irq, void *dev)
{
- struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+ struct arm_pmu *armpmu = (struct arm_pmu *) dev;
+ struct platform_device *plat_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+ int i, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+ for (i = 0; i < irqs; ++i) {
+ if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+ continue;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq >= 0)
+ free_irq(irq, armpmu);
+ }
+
+ release_pmu(armpmu->type);
+}
+
static int
-armpmu_reserve_hardware(void)
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
struct arm_pmu_platdata *plat;
irq_handler_t handle_irq;
- int i, err = -ENODEV, irq;
+ int i, err, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
- pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
- if (IS_ERR(pmu_device)) {
+ err = reserve_pmu(armpmu->type);
+ if (err) {
pr_warning("unable to reserve pmu\n");
- return PTR_ERR(pmu_device);
+ return err;
}
- init_pmu(ARM_PMU_DEVICE_CPU);
-
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
- if (pmu_device->num_resources < 1) {
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+ if (irqs < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
}
- for (i = 0; i < pmu_device->num_resources; ++i) {
+ for (i = 0; i < irqs; ++i) {
+ err = 0;
irq = platform_get_irq(pmu_device, i);
if (irq < 0)
continue;
+ /*
+ * If we have a single PMU interrupt that we can't shift,
+ * assume that we're running on a uniprocessor machine and
+ * continue. Otherwise, continue without this interrupt.
+ */
+ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, i);
+ continue;
+ }
+
err = request_irq(irq, handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
- "armpmu", NULL);
+ "arm-pmu", armpmu);
if (err) {
- pr_warning("unable to request IRQ%d for ARM perf "
- "counters\n", irq);
- break;
+ pr_err("unable to request IRQ%d for ARM PMU counters\n",
+ irq);
+ armpmu_release_hardware(armpmu);
+ return err;
}
+
+ cpumask_set_cpu(i, &armpmu->active_irqs);
}
- if (err) {
- for (i = i - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
- }
-
- return err;
+ return 0;
}
static void
-armpmu_release_hardware(void)
-{
- int i, irq;
-
- for (i = pmu_device->num_resources - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- armpmu->stop();
-
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-
-static void
hw_perf_event_destroy(struct perf_event *event)
{
- if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
- armpmu_release_hardware();
- mutex_unlock(&pmu_reserve_mutex);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ atomic_t *active_events = &armpmu->active_events;
+ struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
+
+ if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+ armpmu_release_hardware(armpmu);
+ mutex_unlock(pmu_reserve_mutex);
}
}
static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
+{
+ return attr->exclude_idle || attr->exclude_user ||
+ attr->exclude_kernel || attr->exclude_hv;
+}
+
+static int
__hw_perf_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping, err;
- /* Decode the generic type into an ARM event identifier. */
- if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu_map_event(event->attr.config);
- } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
- mapping = armpmu_map_cache_event(event->attr.config);
- } else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu_map_raw_event(event->attr.config);
- } else {
- pr_debug("event type %x not supported\n", event->attr.type);
- return -EOPNOTSUPP;
- }
+ mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
@@ -495,34 +483,31 @@
}
/*
- * Check whether we need to exclude the counter from certain modes.
- * The ARM performance counters are on all of the time so if someone
- * has asked us for some excludes then we have to fail.
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
*/
- if (event->attr.exclude_kernel || event->attr.exclude_user ||
- event->attr.exclude_hv || event->attr.exclude_idle) {
+ hwc->idx = -1;
+ hwc->config_base = 0;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ */
+ if ((!armpmu->set_event_filter ||
+ armpmu->set_event_filter(hwc, &event->attr)) &&
+ event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
return -EPERM;
}
/*
- * We don't assign an index until we actually place the event onto
- * hardware. Use -1 to signify that we haven't decided where to put it
- * yet. For SMP systems, each core has it's own PMU so we can't do any
- * clever allocation or constraints checking at this point.
+ * Store the event encoding into the config_base field.
*/
- hwc->idx = -1;
-
- /*
- * Store the event encoding into the config_base field. config and
- * event_base are unused as the only 2 things we need to know are
- * the event mapping and the counter to use. The counter to use is
- * also the indx and the config_base is the event type.
- */
- hwc->config_base = (unsigned long)mapping;
- hwc->config = 0;
- hwc->event_base = 0;
+ hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
@@ -542,32 +527,23 @@
static int armpmu_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
int err = 0;
+ atomic_t *active_events = &armpmu->active_events;
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
+ if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
- }
-
- if (!armpmu)
- return -ENODEV;
event->destroy = hw_perf_event_destroy;
- if (!atomic_inc_not_zero(&active_events)) {
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0) {
- err = armpmu_reserve_hardware();
- }
+ if (!atomic_inc_not_zero(active_events)) {
+ mutex_lock(&armpmu->reserve_mutex);
+ if (atomic_read(active_events) == 0)
+ err = armpmu_reserve_hardware(armpmu);
if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
+ atomic_inc(active_events);
+ mutex_unlock(&armpmu->reserve_mutex);
}
if (err)
@@ -582,22 +558,9 @@
static void armpmu_enable(struct pmu *pmu)
{
- /* Enable all of the perf events on hardware. */
- int idx, enabled = 0;
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
- if (!armpmu)
- return;
-
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
-
- if (!event)
- continue;
-
- armpmu->enable(&event->hw, idx);
- enabled = 1;
- }
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (enabled)
armpmu->start();
@@ -605,20 +568,32 @@
static void armpmu_disable(struct pmu *pmu)
{
- if (armpmu)
- armpmu->stop();
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ armpmu->stop();
}
-static struct pmu pmu = {
- .pmu_enable = armpmu_enable,
- .pmu_disable = armpmu_disable,
- .event_init = armpmu_event_init,
- .add = armpmu_add,
- .del = armpmu_del,
- .start = armpmu_start,
- .stop = armpmu_stop,
- .read = armpmu_read,
-};
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+ atomic_set(&armpmu->active_events, 0);
+ mutex_init(&armpmu->reserve_mutex);
+
+ armpmu->pmu = (struct pmu) {
+ .pmu_enable = armpmu_enable,
+ .pmu_disable = armpmu_disable,
+ .event_init = armpmu_event_init,
+ .add = armpmu_add,
+ .del = armpmu_del,
+ .start = armpmu_start,
+ .stop = armpmu_stop,
+ .read = armpmu_read,
+ };
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+ armpmu_init(armpmu);
+ return perf_pmu_register(&armpmu->pmu, name, type);
+}
/* Include the PMU-specific implementations. */
#include "perf_event_xscale.c"
@@ -630,14 +605,72 @@
* This requires SMP to be available, so exists as a separate initcall.
*/
static int __init
-armpmu_reset(void)
+cpu_pmu_reset(void)
{
- if (armpmu && armpmu->reset)
- return on_each_cpu(armpmu->reset, NULL, 1);
+ if (cpu_pmu && cpu_pmu->reset)
+ return on_each_cpu(cpu_pmu->reset, NULL, 1);
return 0;
}
-arch_initcall(armpmu_reset);
+arch_initcall(cpu_pmu_reset);
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+ {.compatible = "arm,cortex-a9-pmu"},
+ {.compatible = "arm,cortex-a8-pmu"},
+ {.compatible = "arm,arm1136-pmu"},
+ {.compatible = "arm,arm1176-pmu"},
+ {},
+};
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+ {.name = "arm-pmu"},
+ {},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+ cpu_pmu->plat_device = pdev;
+ return 0;
+}
+
+static struct platform_driver armpmu_driver = {
+ .driver = {
+ .name = "arm-pmu",
+ .of_match_table = armpmu_of_device_ids,
+ },
+ .probe = armpmu_device_probe,
+ .id_table = armpmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+ return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+ return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+ int cpu;
+ for_each_possible_cpu(cpu) {
+ struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+ events->events = per_cpu(hw_events, cpu);
+ events->used_mask = per_cpu(used_mask, cpu);
+ raw_spin_lock_init(&events->pmu_lock);
+ }
+ armpmu->get_hw_events = armpmu_get_cpu_events;
+ armpmu->type = ARM_PMU_DEVICE_CPU;
+}
+
+/*
+ * CPU PMU identification and registration.
+ */
static int __init
init_hw_perf_events(void)
{
@@ -651,22 +684,22 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = armv6pmu_init();
+ cpu_pmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = armv6mpcore_pmu_init();
+ cpu_pmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armpmu = armv7_a8_pmu_init();
+ cpu_pmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armpmu = armv7_a9_pmu_init();
+ cpu_pmu = armv7_a9_pmu_init();
break;
case 0xC050: /* Cortex-A5 */
- armpmu = armv7_a5_pmu_init();
+ cpu_pmu = armv7_a5_pmu_init();
break;
case 0xC0F0: /* Cortex-A15 */
- armpmu = armv7_a15_pmu_init();
+ cpu_pmu = armv7_a15_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -674,23 +707,23 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = xscale1pmu_init();
+ cpu_pmu = xscale1pmu_init();
break;
case 2:
- armpmu = xscale2pmu_init();
+ cpu_pmu = xscale2pmu_init();
break;
}
}
- if (armpmu) {
+ if (cpu_pmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- armpmu->name, armpmu->num_events);
+ cpu_pmu->name, cpu_pmu->num_events);
+ cpu_pmu_init(cpu_pmu);
+ armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
return 0;
}
early_initcall(init_hw_perf_events);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index dd7f3b9..e63d811 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -54,7 +54,7 @@
};
enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_CYCLE_COUNTER = 0,
ARMV6_COUNTER0,
ARMV6_COUNTER1,
};
@@ -433,6 +433,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = 0;
@@ -454,12 +455,29 @@
* Mask out the current event and set the counter to count the event
* that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int counter_is_active(unsigned long pmcr, int idx)
+{
+ unsigned long mask = 0;
+ if (idx == ARMV6_CYCLE_COUNTER)
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ else if (idx == ARMV6_COUNTER0)
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ else if (idx == ARMV6_COUNTER1)
+ mask = ARMV6_PMCR_COUNT1_IEN;
+
+ if (mask)
+ return pmcr & mask;
+
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return 0;
}
static irqreturn_t
@@ -468,7 +486,7 @@
{
unsigned long pmcr = armv6_pmcr_read();
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -487,11 +505,11 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!counter_is_active(pmcr, idx))
continue;
/*
@@ -508,7 +526,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -527,28 +545,30 @@
armv6pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val |= ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
armv6pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
/* Always place a cycle counter into the cycle counter. */
@@ -578,6 +598,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -598,12 +619,12 @@
* of ETM bus signal assertion cycles. The external reporting should
* be disabled and so this should never increment.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
@@ -611,6 +632,7 @@
int idx)
{
unsigned long val, mask, flags, evt = 0;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -627,15 +649,21 @@
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
* simply disable the interrupt reporting.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static const struct arm_pmu armv6pmu = {
+static int armv6_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6_perf_map,
+ &armv6_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6pmu = {
.id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
@@ -646,14 +674,12 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6_perf_cache_map,
- .event_map = &armv6_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return &armv6pmu;
}
@@ -665,7 +691,14 @@
* disable the interrupt reporting and update the event. When unthrottling we
* reset the period and enable the interrupt reporting.
*/
-static const struct arm_pmu armv6mpcore_pmu = {
+
+static int armv6mpcore_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6mpcore_perf_map,
+ &armv6mpcore_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6mpcore_pmu = {
.id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
@@ -676,24 +709,22 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6mpcore_perf_cache_map,
- .event_map = &armv6mpcore_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6mpcore_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4c85183..1ef6d00 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -17,6 +17,9 @@
*/
#ifdef CONFIG_CPU_V7
+
+static struct arm_pmu armv7pmu;
+
/*
* Common ARMv7 event types
*
@@ -321,8 +324,8 @@
[PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] =
ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
[PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
@@ -676,25 +679,26 @@
};
/*
- * Perf Events counters
+ * Perf Events' indices
*/
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
+#define ARMV7_IDX_CYCLE_COUNTER 0
+#define ARMV7_IDX_COUNTER0 1
+#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+#define ARMV7_MAX_COUNTERS 32
+#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1)
/*
* ARMv7 low level PMNC access
*/
/*
+ * Perf Event to low level counters mapping
+ */
+#define ARMV7_IDX_TO_COUNTER(x) \
+ (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
+
+/*
* Per-CPU PMNC: config reg
*/
#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
@@ -708,103 +712,76 @@
#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
* FLAG: counters overflow flag status reg
*/
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-static inline unsigned long armv7_pmnc_read(void)
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */
+#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */
+
+/*
+ * Event filters for PMUv2
+ */
+#define ARMV7_EXCLUDE_PL1 (1 << 31)
+#define ARMV7_EXCLUDE_USER (1 << 30)
+#define ARMV7_INCLUDE_HYP (1 << 27)
+
+static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
return val;
}
-static inline void armv7_pmnc_write(unsigned long val)
+static inline void armv7_pmnc_write(u32 val)
{
val &= ARMV7_PMNC_MASK;
isb();
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+static inline int armv7_pmnc_has_overflowed(u32 pmnc)
{
return pmnc & ARMV7_OVERFLOWED_MASK;
}
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
+static inline int armv7_pmnc_counter_valid(int idx)
+{
+ return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
{
int ret = 0;
+ u32 counter;
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
+ if (!armv7_pmnc_counter_valid(idx)) {
pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
+ smp_processor_id(), idx);
+ } else {
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ ret = pmnc & BIT(counter);
+ }
return ret;
}
-static inline int armv7_pmnc_select_counter(unsigned int idx)
+static inline int armv7_pmnc_select_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u selecting wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
isb();
return idx;
@@ -812,124 +789,95 @@
static inline u32 armv7pmu_read_counter(int idx)
{
- unsigned long value = 0;
+ u32 value = 0;
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
return value;
}
static inline void armv7pmu_write_counter(int idx, u32 value)
{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
}
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
{
if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
+ val &= ARMV7_EVTYPE_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+static inline int armv7_pmnc_enable_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+static inline int armv7_pmnc_disable_counter(int idx)
{
- u32 val;
+ u32 counter;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+static inline int armv7_pmnc_enable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+static inline int armv7_pmnc_disable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
return idx;
}
@@ -973,14 +921,14 @@
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
}
}
#endif
@@ -988,12 +936,13 @@
static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1002,9 +951,10 @@
/*
* Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
+ * We only need to set the event for the cycle counter if we
+ * have the ability to perform event filtering.
*/
- if (idx != ARMV7_CYCLE_COUNTER)
+ if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
armv7_pmnc_write_evtsel(idx, hwc->config_base);
/*
@@ -1017,17 +967,18 @@
*/
armv7_pmnc_enable_counter(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Disable counter and interrupt
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1039,14 +990,14 @@
*/
armv7_pmnc_disable_intens(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
{
- unsigned long pmnc;
+ u32 pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -1069,13 +1020,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@@ -1090,7 +1038,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -1108,61 +1056,114 @@
static void armv7pmu_start(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_stop(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx;
+ unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
+ return ARMV7_IDX_CYCLE_COUNTER;
}
+
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv7pmu_set_event_filter(struct hw_perf_event *event,
+ struct perf_event_attr *attr)
+{
+ unsigned long config_base = 0;
+
+ if (attr->exclude_idle)
+ return -EPERM;
+ if (attr->exclude_user)
+ config_base |= ARMV7_EXCLUDE_USER;
+ if (attr->exclude_kernel)
+ config_base |= ARMV7_EXCLUDE_PL1;
+ if (!attr->exclude_hv)
+ config_base |= ARMV7_INCLUDE_HYP;
+
+ /*
+ * Install the filter into config_base as this is used to
+ * construct the event type.
+ */
+ event->config_base = config_base;
+
+ return 0;
}
static void armv7pmu_reset(void *info)
{
- u32 idx, nb_cnt = armpmu->num_events;
+ u32 idx, nb_cnt = cpu_pmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
- for (idx = 1; idx < nb_cnt; ++idx)
+ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
armv7pmu_disable_event(NULL, idx);
/* Initialize & Reset PMNC: C and P bits */
armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
}
+static int armv7_a8_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a8_perf_map,
+ &armv7_a8_perf_cache_map, 0xFF);
+}
+
+static int armv7_a9_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a9_perf_map,
+ &armv7_a9_perf_cache_map, 0xFF);
+}
+
+static int armv7_a5_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a5_perf_map,
+ &armv7_a5_perf_cache_map, 0xFF);
+}
+
+static int armv7_a15_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a15_perf_map,
+ &armv7_a15_perf_cache_map, 0xFF);
+}
+
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
@@ -1173,7 +1174,6 @@
.start = armv7pmu_start,
.stop = armv7pmu_stop,
.reset = armv7pmu_reset,
- .raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
@@ -1188,62 +1188,59 @@
return nb_cnt + 1;
}
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
- armv7pmu.cache_map = &armv7_a8_perf_cache_map;
- armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
- armv7pmu.cache_map = &armv7_a9_perf_cache_map;
- armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
- armv7pmu.cache_map = &armv7_a5_perf_cache_map;
- armv7pmu.event_map = &armv7_a5_perf_map;
+ armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
- armv7pmu.cache_map = &armv7_a15_perf_cache_map;
- armv7pmu.event_map = &armv7_a15_perf_map;
+ armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
+ armv7pmu.set_event_filter = armv7pmu_set_event_filter;
return &armv7pmu;
}
#else
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3c43974..e0cca10 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -40,7 +40,7 @@
};
enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_CYCLE_COUNTER = 0,
XSCALE_COUNTER0,
XSCALE_COUNTER1,
XSCALE_COUNTER2,
@@ -222,7 +222,7 @@
{
unsigned long pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -249,13 +249,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -266,7 +263,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -284,6 +281,7 @@
xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -305,18 +303,19 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -336,16 +335,16 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
if (XSCALE_PERFCTR_CCNT == event->config_base) {
@@ -368,24 +367,26 @@
xscale1pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val |= XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -424,7 +425,13 @@
}
}
-static const struct arm_pmu xscale1pmu = {
+static int xscale_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &xscale_perf_map,
+ &xscale_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu xscale1pmu = {
.id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
@@ -435,14 +442,12 @@
.get_event_idx = xscale1pmu_get_event_idx,
.start = xscale1pmu_start,
.stop = xscale1pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return &xscale1pmu;
}
@@ -560,7 +565,7 @@
{
unsigned long pmnc, of_flags;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -581,13 +586,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -598,7 +600,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -616,6 +618,7 @@
xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -649,16 +652,17 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -692,14 +696,14 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx = xscale1pmu_get_event_idx(cpuc, event);
@@ -718,24 +722,26 @@
xscale2pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
val |= XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -786,7 +792,7 @@
}
}
-static const struct arm_pmu xscale2pmu = {
+static struct arm_pmu xscale2pmu = {
.id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
@@ -797,24 +803,22 @@
.get_event_idx = xscale2pmu_get_event_idx,
.start = xscale2pmu_start,
.stop = xscale2pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 5,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index c53474f..2c3407e 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -10,192 +10,26 @@
*
*/
-#define pr_fmt(fmt) "PMU: " fmt
-
-#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <asm/pmu.h>
-static volatile long pmu_lock;
+/*
+ * PMU locking to ensure mutual exclusion between different subsystems.
+ */
+static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-
-static int __devinit pmu_register(struct platform_device *pdev,
- enum arm_pmu_type type)
-{
- if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
- pr_warning("received registration request for unknown "
- "PMU device type %d\n", type);
- return -EINVAL;
- }
-
- if (pmu_devices[type]) {
- pr_warning("rejecting duplicate registration of PMU device "
- "type %d.", type);
- return -ENOSPC;
- }
-
- pr_info("registered new PMU device of type %d\n", type);
- pmu_devices[type] = pdev;
- return 0;
-}
-
-#define OF_MATCH_PMU(_name, _type) { \
- .compatible = _name, \
- .data = (void *)_type, \
-}
-
-#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
-
-static struct of_device_id armpmu_of_device_ids[] = {
- OF_MATCH_CPU("arm,cortex-a9-pmu"),
- OF_MATCH_CPU("arm,cortex-a8-pmu"),
- OF_MATCH_CPU("arm,arm1136-pmu"),
- OF_MATCH_CPU("arm,arm1176-pmu"),
- {},
-};
-
-#define PLAT_MATCH_PMU(_name, _type) { \
- .name = _name, \
- .driver_data = _type, \
-}
-
-#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
- PLAT_MATCH_CPU("arm-pmu"),
- {},
-};
-
-enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
-{
- const struct of_device_id *of_id;
- const struct platform_device_id *pdev_id;
-
- /* provided by of_device_id table */
- if (pdev->dev.of_node) {
- of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
- BUG_ON(!of_id);
- return (enum arm_pmu_type)of_id->data;
- }
-
- /* Provided by platform_device_id table */
- pdev_id = platform_get_device_id(pdev);
- BUG_ON(!pdev_id);
- return pdev_id->driver_data;
-}
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
- return pmu_register(pdev, armpmu_device_type(pdev));
-}
-
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
- .id_table = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
- return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-struct platform_device *
+int
reserve_pmu(enum arm_pmu_type type)
{
- struct platform_device *pdev;
-
- if (test_and_set_bit_lock(type, &pmu_lock)) {
- pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[type] == NULL) {
- clear_bit_unlock(type, &pmu_lock);
- pdev = ERR_PTR(-ENODEV);
- } else {
- pdev = pmu_devices[type];
- }
-
- return pdev;
+ return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
}
EXPORT_SYMBOL_GPL(reserve_pmu);
-int
+void
release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[type]))
- return -EINVAL;
- clear_bit_unlock(type, &pmu_lock);
- return 0;
+ clear_bit_unlock(type, pmu_lock);
}
-EXPORT_SYMBOL_GPL(release_pmu);
-
-static int
-set_irq_affinity(int irq,
- unsigned int cpu)
-{
-#ifdef CONFIG_SMP
- int err = irq_set_affinity(irq, cpumask_of(cpu));
- if (err)
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- return err;
-#else
- return -EINVAL;
-#endif
-}
-
-static int
-init_cpu_pmu(void)
-{
- int i, irqs, err = 0;
- struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
-
- if (!pdev)
- return -ENODEV;
-
- irqs = pdev->num_resources;
-
- /*
- * If we have a single PMU interrupt that we can't shift, assume that
- * we're running on a uniprocessor machine and continue.
- */
- if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
- return 0;
-
- for (i = 0; i < irqs; ++i) {
- err = set_irq_affinity(platform_get_irq(pdev, i), i);
- if (err)
- break;
- }
-
- return err;
-}
-
-int
-init_pmu(enum arm_pmu_type type)
-{
- int err = 0;
-
- switch (type) {
- case ARM_PMU_DEVICE_CPU:
- err = init_cpu_pmu();
- break;
- default:
- pr_warning("attempt to initialise PMU of unknown "
- "type %d\n", type);
- err = -EINVAL;
- }
-
- return err;
-}
-EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e514c76..6136144 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -820,25 +820,8 @@
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
- else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
- /*
- * We still are executing with a minimal MMU mapping created
- * with the presumption that the machine default for this
- * is located in the first MB of RAM. Anything else will
- * fault and silently hang the kernel at this point.
- */
- if (mdesc->boot_params < PHYS_OFFSET ||
- mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
- printk(KERN_WARNING
- "Default boot params at physical 0x%08lx out of reach\n",
- mdesc->boot_params);
- } else
-#endif
- {
- tags = phys_to_virt(mdesc->boot_params);
- }
- }
+ else if (mdesc->atag_offset)
+ tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index dc902f2..020e99c 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -8,92 +8,61 @@
.text
/*
- * Save CPU state for a suspend
- * r1 = v:p offset
- * r2 = suspend function arg0
- * r3 = suspend function
+ * Save CPU state for a suspend. This saves the CPU general purpose
+ * registers, and allocates space on the kernel stack to save the CPU
+ * specific registers and some other data for resume.
+ * r0 = suspend function arg0
+ * r1 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
#ifdef MULTI_CPU
ldr r10, =processor
- ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
- ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
#else
- ldr r5, =cpu_suspend_size
- ldr ip, =cpu_do_resume
+ ldr r4, =cpu_suspend_size
#endif
- mov r6, sp @ current virtual SP
- sub sp, sp, r5 @ allocate CPU state on stack
- mov r0, sp @ save pointer to CPU save block
- add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn
- ldr r5, =sleep_save_sp
- add r6, sp, r1 @ convert SP to phys
- stmfd sp!, {r2, r3} @ save suspend func arg and pointer
+ mov r5, sp @ current virtual SP
+ add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn
+ sub sp, sp, r4 @ allocate CPU state on stack
+ stmfd sp!, {r0, r1} @ save suspend func arg and pointer
+ add r0, sp, #8 @ save pointer to save block
+ mov r1, r4 @ size of save block
+ mov r2, r5 @ virtual SP
+ ldr r3, =sleep_save_sp
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
- str r6, [r5, lr, lsl #2] @ save phys SP
-#else
- str r6, [r5] @ save phys SP
+ add r3, r3, lr, lsl #2
#endif
-#ifdef MULTI_CPU
- mov lr, pc
- ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
-#else
- bl cpu_do_suspend
-#endif
-
- @ flush data cache
-#ifdef MULTI_CACHE
- ldr r10, =cpu_cache
- mov lr, pc
- ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
-#else
- bl __cpuc_flush_kern_all
-#endif
+ bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
- ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn
+ ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
+ teq r0, #0
+ moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
*/
-ENTRY(cpu_resume_mmu)
- adr r4, cpu_resume_turn_mmu_on
- mov r4, r4, lsr #20
- orr r3, r3, r4, lsl #20
- ldr r5, [r2, r4, lsl #2] @ save old mapping
- str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
- sub r2, r2, r1
- ldr r3, =cpu_resume_after_mmu
- bic r1, r0, #CR_C @ ensure D-cache is disabled
- b cpu_resume_turn_mmu_on
-ENDPROC(cpu_resume_mmu)
- .ltorg
.align 5
-cpu_resume_turn_mmu_on:
- mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
- mrc p15, 0, r1, c0, c0, 0 @ read id reg
- mov r1, r1
- mov r1, r1
+ENTRY(cpu_resume_mmu)
+ ldr r3, =cpu_resume_after_mmu
+ mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ mov r0, r0
+ mov r0, r0
mov pc, r3 @ jump to virtual address
-ENDPROC(cpu_resume_turn_mmu_on)
+ENDPROC(cpu_resume_mmu)
cpu_resume_after_mmu:
- str r5, [r2, r4, lsl #2] @ restore old mapping
- mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
ldmfd sp!, {r4 - r11, pc}
@@ -119,7 +88,7 @@
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
- @ load v:p, stack, resume fn
+ @ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index d88ff02..a96c08c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -16,7 +16,6 @@
#include <linux/cache.h>
#include <linux/profile.h>
#include <linux/errno.h>
-#include <linux/ftrace.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
@@ -31,6 +30,8 @@
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
+#include <asm/exception.h>
+#include <asm/topology.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -39,6 +40,7 @@
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
+#include <asm/smp_plat.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@@ -259,6 +261,20 @@
}
#endif /* CONFIG_HOTPLUG_CPU */
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+ int i;
+ u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+ cpu_logical_map(0) = cpu;
+ for (i = 1; i < NR_CPUS; ++i)
+ cpu_logical_map(i) = i == cpu ? 0 : i;
+
+ printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.
@@ -268,6 +284,8 @@
struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
cpu_info->loops_per_jiffy = loops_per_jiffy;
+
+ store_cpu_topology(cpuid);
}
/*
@@ -358,6 +376,8 @@
{
unsigned int ncores = num_possible_cpus();
+ init_cpu_topology();
+
smp_store_cpu_info(smp_processor_id());
/*
@@ -437,10 +457,6 @@
for (i = 0; i < NR_IPI; i++)
sum += __get_irq_stat(cpu, ipi_irqs[i]);
-#ifdef CONFIG_LOCAL_TIMERS
- sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
return sum;
}
@@ -457,33 +473,6 @@
irq_exit();
}
-#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
- int cpu = smp_processor_id();
-
- if (local_timer_ack()) {
- __inc_irq_stat(cpu, local_timer_irqs);
- ipi_timer();
- }
-
- set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
- unsigned int cpu;
-
- seq_printf(p, "%*s: ", prec, "LOC");
-
- for_each_present_cpu(cpu)
- seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
- seq_printf(p, " Local timer interrupts\n");
-}
-#endif
-
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
static void smp_timer_broadcast(const struct cpumask *mask)
{
@@ -534,7 +523,7 @@
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ local_timer_stop(evt);
}
#endif
@@ -567,6 +556,11 @@
*/
asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
{
+ handle_IPI(ipinr, regs);
+}
+
+void handle_IPI(int ipinr, struct pt_regs *regs)
+{
unsigned int cpu = smp_processor_id();
struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 7fcddb7..8f5dd79 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -34,7 +34,7 @@
/*
* Enable the SCU
*/
-void __init scu_enable(void __iomem *scu_base)
+void scu_enable(void __iomem *scu_base)
{
u32 scu_ctrl;
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c1862..a8a6682 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
@@ -26,6 +27,8 @@
static unsigned long twd_timer_rate;
+static struct clock_event_device __percpu **twd_evt;
+
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
@@ -80,6 +83,12 @@
return 0;
}
+void twd_timer_stop(struct clock_event_device *clk)
+{
+ twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ disable_percpu_irq(clk->irq);
+}
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -119,11 +128,43 @@
}
}
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+ if (twd_timer_ack()) {
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
+ struct clock_event_device **this_cpu_clk;
+
+ if (!twd_evt) {
+ int err;
+
+ twd_evt = alloc_percpu(struct clock_event_device *);
+ if (!twd_evt) {
+ pr_err("twd: can't allocate memory\n");
+ return;
+ }
+
+ err = request_percpu_irq(clk->irq, twd_handler,
+ "twd", twd_evt);
+ if (err) {
+ pr_err("twd: can't register interrupt %d (%d)\n",
+ clk->irq, err);
+ return;
+ }
+ }
+
twd_calibrate_rate();
clk->name = "local_timer";
@@ -137,8 +178,10 @@
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ this_cpu_clk = __this_cpu_ptr(twd_evt);
+ *this_cpu_clk = clk;
+
clockevents_register_device(clk);
- /* Make sure our local interrupt controller has this enabled */
- gic_enable_ppi(clk->irq);
+ enable_percpu_irq(clk->irq, 0);
}
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
new file mode 100644
index 0000000..93a22d2
--- /dev/null
+++ b/arch/arm/kernel/suspend.c
@@ -0,0 +1,72 @@
+#include <linux/init.h>
+
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+static pgd_t *suspend_pgd;
+
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void cpu_resume_mmu(void);
+
+/*
+ * This is called by __cpu_suspend() to save the state, and do whatever
+ * flushing is required to ensure that when the CPU goes to sleep we have
+ * the necessary data available when the caches are not searched.
+ */
+void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
+{
+ *save_ptr = virt_to_phys(ptr);
+
+ /* This must correspond to the LDM in cpu_resume() assembly */
+ *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = sp;
+ *ptr++ = virt_to_phys(cpu_do_resume);
+
+ cpu_do_suspend(ptr);
+
+ flush_cache_all();
+ outer_clean_range(*save_ptr, *save_ptr + ptrsz);
+ outer_clean_range(virt_to_phys(save_ptr),
+ virt_to_phys(save_ptr) + sizeof(*save_ptr));
+}
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+ struct mm_struct *mm = current->active_mm;
+ int ret;
+
+ if (!suspend_pgd)
+ return -EINVAL;
+
+ /*
+ * Provide a temporary page table with an identity mapping for
+ * the MMU-enable code, required for resuming. On successful
+ * resume (indicated by a zero return code), we need to switch
+ * back to the correct page tables.
+ */
+ ret = __cpu_suspend(arg, fn);
+ if (ret == 0) {
+ cpu_switch_mm(mm->pgd, mm);
+ local_flush_tlb_all();
+ }
+
+ return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+ suspend_pgd = pgd_alloc(&init_mm);
+ if (suspend_pgd) {
+ unsigned long addr = virt_to_phys(cpu_resume_mmu);
+ identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
+ }
+ return suspend_pgd ? 0 : -ENOMEM;
+}
+core_initcall(cpu_suspend_init);
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
new file mode 100644
index 0000000..1040c00
--- /dev/null
+++ b/arch/arm/kernel/topology.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/kernel/topology.c
+ *
+ * Copyright (C) 2011 Linaro Limited.
+ * Written by: Vincent Guittot
+ *
+ * based on arch/sh/kernel/topology.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/sched.h>
+
+#include <asm/cputype.h>
+#include <asm/topology.h>
+
+#define MPIDR_SMP_BITMASK (0x3 << 30)
+#define MPIDR_SMP_VALUE (0x2 << 30)
+
+#define MPIDR_MT_BITMASK (0x1 << 24)
+
+/*
+ * These masks reflect the current use of the affinity levels.
+ * The affinity level can be up to 16 bits according to ARM ARM
+ */
+
+#define MPIDR_LEVEL0_MASK 0x3
+#define MPIDR_LEVEL0_SHIFT 0
+
+#define MPIDR_LEVEL1_MASK 0xF
+#define MPIDR_LEVEL1_SHIFT 8
+
+#define MPIDR_LEVEL2_MASK 0xFF
+#define MPIDR_LEVEL2_SHIFT 16
+
+struct cputopo_arm cpu_topology[NR_CPUS];
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+{
+ return &cpu_topology[cpu].core_sibling;
+}
+
+/*
+ * store_cpu_topology is called at boot when only one cpu is running
+ * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
+ * which prevents simultaneous write access to cpu_topology array
+ */
+void store_cpu_topology(unsigned int cpuid)
+{
+ struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
+ unsigned int mpidr;
+ unsigned int cpu;
+
+ /* If the cpu topology has been already set, just return */
+ if (cpuid_topo->core_id != -1)
+ return;
+
+ mpidr = read_cpuid_mpidr();
+
+ /* create cpu topology mapping */
+ if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
+ /*
+ * This is a multiprocessor system
+ * multiprocessor format & multiprocessor mode field are set
+ */
+
+ if (mpidr & MPIDR_MT_BITMASK) {
+ /* core performance interdependency */
+ cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
+ & MPIDR_LEVEL0_MASK;
+ cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
+ & MPIDR_LEVEL1_MASK;
+ cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT)
+ & MPIDR_LEVEL2_MASK;
+ } else {
+ /* largely independent cores */
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
+ & MPIDR_LEVEL0_MASK;
+ cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
+ & MPIDR_LEVEL1_MASK;
+ }
+ } else {
+ /*
+ * This is an uniprocessor system
+ * we are in multiprocessor format but uniprocessor system
+ * or in the old uniprocessor format
+ */
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = 0;
+ cpuid_topo->socket_id = -1;
+ }
+
+ /* update core and thread sibling masks */
+ for_each_possible_cpu(cpu) {
+ struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
+
+ if (cpuid_topo->socket_id == cpu_topo->socket_id) {
+ cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu,
+ &cpuid_topo->core_sibling);
+
+ if (cpuid_topo->core_id == cpu_topo->core_id) {
+ cpumask_set_cpu(cpuid,
+ &cpu_topo->thread_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu,
+ &cpuid_topo->thread_sibling);
+ }
+ }
+ }
+ smp_wmb();
+
+ printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
+ cpuid, cpu_topology[cpuid].thread_id,
+ cpu_topology[cpuid].core_id,
+ cpu_topology[cpuid].socket_id, mpidr);
+}
+
+/*
+ * init_cpu_topology is called at boot when only one cpu is running
+ * which prevent simultaneous write access to cpu_topology array
+ */
+void init_cpu_topology(void)
+{
+ unsigned int cpu;
+
+ /* init core mask */
+ for_each_possible_cpu(cpu) {
+ struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
+
+ cpu_topo->thread_id = -1;
+ cpu_topo->core_id = -1;
+ cpu_topo->socket_id = -1;
+ cpumask_clear(&cpu_topo->core_sibling);
+ cpumask_clear(&cpu_topo->thread_sibling);
+ }
+ smp_wmb();
+}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index bc9f9da..2103825 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
#include <linux/atomic.h>
#include <asm/cacheflush.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..4b59d96 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -442,6 +442,17 @@
# ----------------------------------------------------------
+comment "Generic Board Type"
+
+config MACH_AT91SAM_DT
+ bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..3ff245e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -74,6 +74,9 @@
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+# AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 3462b81..08c665a 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,3 +16,5 @@
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
+
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index cb397be..f4518b4 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -199,6 +199,14 @@
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb..0fe1c30 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -215,6 +216,12 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -319,6 +326,7 @@
static void __init at91sam9g45_map_io(void)
{
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+ init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
new file mode 100644
index 0000000..0b7d327
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt.c
@@ -0,0 +1,123 @@
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/system_rev.h>
+#include <mach/at91sam9_smc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static const struct of_device_id aic_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", },
+ {},
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
+ at91_init_irq_default();
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ /* NAND */
+ ek_add_device_nand();
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9..406bb64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
/*
* DMA peripheral identifiers
* for hardware handshaking interface
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2..0ed8648 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index ed78aab..6ae20a6 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,6 @@
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
-#include <mach/memory.h>
#include <cfg_global.h>
#include <mach/csp/mm_io.h>
@@ -31,7 +30,7 @@
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_START PLAT_PHYS_OFFSET
+#define RAM_START PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
deleted file mode 100644
index 15162e4..0000000
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <cfg_global.h>
-
-/*
- * Physical vs virtual RAM address space conversion. These are
- * private definitions which should NOT be used outside memory.h
- * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-
-#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
-#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e..8616876 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
*****************************************************************************/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -53,4 +54,6 @@
{
iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+ /* Maximum DMA memory allowed is 14M */
+ init_consistent_dma_size(14 << 20);
}
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@
MACHINE_START(AUTCPU12, "autronix autcpu12")
/* Maintainer: Thomas Gleixner */
- .boot_params = 0xc0020000,
+ .atag_offset = 0x20000,
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@
MACHINE_START(CDB89712, "Cirrus-CDB89712")
/* Maintainer: Ray Lehtiniemi */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@
MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
/* Maintainer: Rob Scott */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 67b5abb4..06c8abd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,7 +37,7 @@
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x0100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 98ca5b2..abf522d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,7 +57,7 @@
MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
/* Maintainer: Jon McClintock */
- .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
+ .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
.reserve = edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index b1cb479..b6f7d86 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,7 +75,6 @@
MACHINE_START(FORTUNET, "ARM-FortuNet")
/* Maintainer: FortuNet Inc. */
- .boot_params = 0x00000000,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c687..b802e8a 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifndef CONFIG_DEBUG_CLPS711X_UART2
mov \rp, #0x0000 @ UART1
#else
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..e7f75ae 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,7 +89,7 @@
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_p720t,
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d149..55f7b4b 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@
}
MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d8286..d04c150 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #0x00009000
orr \rv, \rp, #0xf0000000 @ virtual base
orr \rp, \rp, #0x10000000
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
deleted file mode 100644
index dc16c5c..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
-#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
-
-#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
-
-#endif
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd786..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@
}
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d514..6e41cb5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1291,7 +1291,7 @@
}
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@
}
MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@
}
MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f21..04c43ab 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@
}
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a314..337c45e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@
}
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
@@ -801,7 +801,7 @@
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226..6efc84cc 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@
}
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@
}
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@
MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@
#endif
MACHINE_START(TNETV107X, "TNETV107X EVM")
- .boot_params = (TNETV107X_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d25573..865ffe5 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
@@ -86,6 +87,8 @@
iotable_init(davinci_soc_info.io_desc,
davinci_soc_info.io_desc_num);
+ init_consistent_dma_size(14 << 20);
+
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31..0b314bf 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,7 +19,7 @@
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 0000000..c19e047
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET 0xc
+#define DDR2_SRPD_BIT (1 << 23)
+#define DDR2_MCLKSTOPEN_BIT (1 << 30)
+#define DDR2_LPMODEN_BIT (1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4..cf94552 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <mach/serial.h>
#define UART_SHIFT 2
-#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rp, =davinci_uart_phys
- add \rv, \rp, #4 @ davinci_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ davinci_uart_phys
+ ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART address set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
+ and \rp, pc, #0xff000000
+ ldr \rv, =DAVINCI_UART_INFO_OFS
+ add \rp, \rp, \rv
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rv, =davinci_uart_phys
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #0]
- str \rp, [\rv]
+ ldr \rv, [\rp, #0]
+ str \rv, [\tmp, #0]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
- ldrne \rv, =davinci_uart_virt
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #4]
- str \rp, [\rv]
+ ldr \rv, [\rp, #4]
+ str \rv, [\tmp, #4]
b 10b
-99:
+
+ .align
+99: .word .
+ .word davinci_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 7873194..0000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE 0x80000000
-#define DA8XX_DDR_BASE 0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET 0xc
-#define DDR2_SRPD_BIT BIT(23)
-#define DDR2_MCLKSTOPEN_BIT BIT(30)
-#define DDR2_LPMODEN_BIT BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce1..e347d88 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
* macros in debug-macro.S.
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
*/
-#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS 0x3ff8
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d8068..9dc7cf9 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@
static inline void set_uart_info(u32 phys, void * __iomem virt)
{
- u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
uart = (u32 *)phys;
uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045..d4e9316 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#include "clock.h"
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@
}
MACHINE_START(CM_A510, "Compulab CM-A510 Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2b..5929cbc 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =DOVE_SB_REGS_PHYS_BASE
ldr \rv, =DOVE_SB_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
deleted file mode 100644
index bbc93fe..0000000
--- a/arch/arm/mach-dove/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc77..d0ce8ab 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
- .boot_params = 0x00000400,
+ .atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.soft_reboot = 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690..bb02c05 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
**/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xf0000000
orr \rp, \rp, #0x00000be0
mov \rp, \rv
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9969bb1..257175e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -240,7 +240,7 @@
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -251,7 +251,7 @@
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -262,7 +262,7 @@
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -273,7 +273,7 @@
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -284,7 +284,7 @@
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -295,7 +295,7 @@
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -306,7 +306,7 @@
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -317,7 +317,7 @@
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc907..af54e43 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rp, \rp, #0x000c0000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@
#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -88,7 +88,7 @@
#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -99,7 +99,7 @@
#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -110,7 +110,7 @@
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 8392e95..238bc60 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,8 @@
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 2e9c614..3bdf3a2 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef8..6cacf16 100644
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e28..006a4f4 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -55,7 +55,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -76,8 +76,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..6e05368 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
index a7c65e0..b24ddd7 100644
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ b/arch/arm/mach-exynos4/mach-smdkc210.c
@@ -301,7 +301,7 @@
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkc210_map_io,
.init_machine = smdkc210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea41495..d90fcdd 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -255,7 +255,7 @@
MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..2aac6f7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd8686..582b874 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -386,9 +386,11 @@
if (cpu == 0) {
mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
@@ -402,9 +404,10 @@
return 0;
}
-int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 0;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_irq(evt->irq);
}
#endif /* CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index df6ef1b..0c90896 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -193,12 +193,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "EXYNOS4: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 5b1a8db..a3da5d1 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,7 +86,7 @@
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb..e5acde2 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x000003f8
orr \rv, \rp, #0xff000000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
@@ -31,7 +31,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.if dc21285_low
mov \rp, #dc21285_low
.else
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..d8c1c92 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,7 +648,7 @@
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.reserve_lp0 = 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
/* Maintainer: Jamey Hicks / George France */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@
}
MACHINE_START(RUT100, "Teltonika RUT100")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006..8376707 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =GEMINI_UART_BASE @ physical
ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
deleted file mode 100644
index a50915f..0000000
--- a/arch/arm/mach-gemini/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PLAT_PHYS_OFFSET UL(0x00000000)
-#else
-# define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea..9886f19 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
MACHINE_START(H7201, "Hynix GMS30C7201")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0xc0001000,
+ .atag_offset = 0x1000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@
MACHINE_START(H7202, "Hynix HMS30C7202")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0x40000100,
+ .atag_offset = 0x100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e8..8a46157 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
.equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00020000 @ UART1
add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
deleted file mode 100644
index 96dcf50..0000000
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-#endif
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index e008554..c9a9cf6 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -554,7 +554,7 @@
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index a8364cc..edb3730 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,7 +311,7 @@
};
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index fc4fea1..66af2e8 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index b05de09..ab8fbcc 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,7 +163,7 @@
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 678cf83..38eb9e4 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,7 +275,7 @@
};
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index f572ce9..7052155 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,7 @@
MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index e7fc4f0..8d6a635 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,7 @@
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index a65d910..4288e8f 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -271,7 +271,7 @@
};
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index ebe9a29..fc49785 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -140,7 +140,7 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
@@ -150,7 +150,7 @@
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 43dd22b..25f8402 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,7 +305,7 @@
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX21_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx21ads_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index bd735ad..88dccf1 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -263,7 +263,7 @@
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index b2bc10b..71bb45d 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -421,7 +421,7 @@
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index e6d1321..e75f391 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -345,7 +345,7 @@
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b4aa9c3..eb3e3fe 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -764,7 +764,7 @@
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 13e7347..9cc1a49 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,7 +535,7 @@
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 070a8d1..5defd8e 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,7 +295,7 @@
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4f66ea4..c97c26d 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -280,7 +280,7 @@
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index cd07ebe..fff7791 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -584,7 +584,7 @@
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 5a5eb3e..7a46202 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,7 +217,7 @@
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index d01a92f..125c196 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,7 @@
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 100babc..26072f4 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,7 +435,7 @@
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 3fb5eaa..efd6b53 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,7 +688,7 @@
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = pcm037_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index dac2b79..f0a5282 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -349,7 +349,7 @@
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index a27baa4..7366c2a 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,7 +418,7 @@
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 4243d1f..1c4822b 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -263,7 +263,7 @@
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 17f15fb..bb6e5b2 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,7 @@
MACHINE_START(SCB9328, "Synertronixx scb9328")
/* Sascha Hauer */
- .boot_params = 0x08000100,
+ .atag_offset = 100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598f..411b116 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x16000000 @ physical base address
mov \rv, #0xf0000000 @ virtual base
add \rv, \rv, #0x16000000 >> 4
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8cdc730..a20fb3f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -459,7 +459,7 @@
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = ap_map_io,
.init_early = integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466..d869a6f 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00002300
orr \rp, \rp, #0x00000040
orr \rv, \rp, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaff..4cf2cc4 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbf..4325055 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@
}
MACHINE_START(EM7210, "Lanner EM7210")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = em7210_map_io,
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4..0edc880 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@
MACHINE_START(GLANTANK, "GLAN Tank")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = glantank_map_io,
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c..363bdf9 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xfe000000 @ physical as well as virtual
orr \rp, \rp, #0x00800000 @ location of the UART
mov \rv, \rp
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
deleted file mode 100644
index 169cc23..0000000
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514..9e7aacc 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
@@ -327,7 +327,7 @@
*/
MACHINE_START(EP80219, "Intel EP80219")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e69..53ea86f 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq80321_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374ea..d726927 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@
MACHINE_START(N2100, "Thecus N2100")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = n2100_map_io,
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500d..361be1f 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00ff0000
orr \rp, \rp, #0x0000f700
orr \rv, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
deleted file mode 100644
index 8e1daf7..0000000
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c027..9e14ccc 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436..09c899a 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ad..af99945 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b..bdd3ccd 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00030000
#ifdef __ARMEB__
orr \rp, \rp, #0x00000003
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8..f7dfd97 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef8..d33bcac 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254..61a2867 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -428,7 +428,7 @@
#ifdef CONFIG_ARCH_IXDP2801
MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -441,7 +441,7 @@
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = espresso_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef..5ff524c 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e3..b3a57e0 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@
.map_io = ixdp2351_map_io,
.init_irq = ixdp2351_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ixdp2351_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d..8f4dcbb 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = roadrunner_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d..37609a2 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -185,7 +185,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b..81dfec3 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -130,7 +130,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 03e5451..71607a7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -279,7 +279,7 @@
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 23a8b36..a9540cd 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -273,7 +273,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851b..d69d1b0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gateway7001_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a..bf6678d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gmlr_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dff..aa029fc 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gtwx5715_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49..8c9f8d5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifdef __ARMEB__
mov \rp, #3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
deleted file mode 100644
index 4caf176..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a29279..f235f82 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -270,7 +270,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -284,7 +284,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -298,7 +298,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index afb5187..9f46692 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -314,7 +314,7 @@
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 69e40f2..3676fbf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -300,7 +300,7 @@
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c..27e469e 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = vulcan_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad..b14144b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = wg302v2_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae4..f785d40 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
deleted file mode 100644
index 4600b44..0000000
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -269,7 +269,7 @@
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -280,7 +280,7 @@
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -410,7 +410,7 @@
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -226,7 +226,7 @@
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -238,7 +238,7 @@
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -149,7 +149,7 @@
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3ca4f8e..a5fcc7c 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@
MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index 1338cb3..fb91a71 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@
MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index e2e3cba..8f67a75 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@
MACHINE_START(KS8695, "KS8695 Centaur Development Board")
/* Maintainer: Micrel Semiconductor Inc. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516ad..a79e489 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KS8695_UART_PA @ physical base address
ldr \rv, =KS8695_UART_VA @ virtual base address
.endm
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..0b4e760 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00044000 @ UART1
@ mov \rp, #0x00045000 @ UART2
add \rv, \rp, #io_virt @ virtual address
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744..351bd6c 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* Debug output is hardcoded to standard UART 5
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldreq \rp, =0x40090000
ldrne \rv, =0xF4090000
.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
deleted file mode 100644
index a647dd6..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/memory.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset of bank 0
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7993b09..9b621e1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -382,7 +382,7 @@
MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
/* Maintainer: Kevin Wells, NXP Semiconductors */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3..b6f14d2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/addr-map.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual
orr \rp, \rp, #0x00017000
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
deleted file mode 100644
index d68b50a..0000000
--- a/arch/arm/mach-mmp/include/mach/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 18a3c97..16c86f8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = halibut_fixup,
.map_io = halibut_map_io,
.init_irq = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7a9a03e..8a1672e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@
extern struct sys_timer msm_timer;
MACHINE_START(MAHIMAHI, "mahimahi")
- .boot_params = 0x20000100,
+ .atag_offset = 0x100,
.fixup = mahimahi_fixup,
.map_io = mahimahi_map_io,
.init_irq = msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..a807655 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,7 @@
}
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -138,7 +138,7 @@
MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -146,7 +146,7 @@
MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -154,7 +154,7 @@
MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index b7a8496..bb72ea0 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -24,6 +24,7 @@
#include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -42,6 +43,21 @@
extern struct sys_timer msm_timer;
+static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
+ tag->u.mem.start = 0;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm7x30_reserve(void)
+{
+ memblock_remove(0x0, SZ_2M);
+}
+
static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */
@@ -106,7 +122,9 @@
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -114,7 +132,9 @@
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -122,7 +142,9 @@
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 35c7cee..b04468e 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -20,16 +20,34 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/clkdev.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include "devices.h"
+static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM &&
+ tag->u.mem.start == 0x40200000) {
+ tag->u.mem.start = 0x40000000;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm8960_reserve(void)
+{
+ memblock_remove(0x40000000, SZ_2M);
+}
+
static void __init msm8960_map_io(void)
{
msm_map_msm8960_io();
@@ -76,6 +94,8 @@
}
MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
+ .fixup = msm8960_fixup,
+ .reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
@@ -83,6 +103,8 @@
MACHINE_END
MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
+ .fixup = msm8960_fixup,
+ .reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 1163b6f..cf38e22 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,26 +8,41 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
+static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM &&
+ tag->u.mem.start == 0x40200000) {
+ tag->u.mem.start = 0x40000000;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm8x60_reserve(void)
+{
+ memblock_remove(0x40000000, SZ_2M);
+}
static void __init msm8x60_map_io(void)
{
@@ -36,8 +51,6 @@
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -49,22 +62,50 @@
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
{
}
+#ifdef CONFIG_OF
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+ { .compatible = "qcom,msm-8660-qgic", },
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
+ MSM8X60_QGIC_DIST_PHYS);
+ if (node)
+ irq_domain_add_simple(node, GIC_SPI_START);
+
+ if (of_machine_is_compatible("qcom,msm8660-surf")) {
+ printk(KERN_INFO "Init surf UART registers\n");
+ msm8x60_init_uart12dm();
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+#endif /* CONFIG_OF */
+
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -72,6 +113,8 @@
MACHINE_END
MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -79,6 +122,8 @@
MACHINE_END
MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -86,8 +131,21 @@
MACHINE_END
MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+#ifdef CONFIG_OF
+/* TODO: General device tree support for all MSM. */
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_dt_init,
+ .timer = &msm_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..51109b1 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,7 @@
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
@@ -201,7 +201,7 @@
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..dc0bcb5 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,7 @@
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 8143867..22d5694 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@
}
MACHINE_START(TROUT, "HTC Dream")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_irq = trout_init_irq,
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99e..2dc73cc 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h>
#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
.endm
@@ -37,7 +37,7 @@
beq 1001b
.endm
#else
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rv, #0xff000000
orr \rv, \rv, #0x00f00000
.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
deleted file mode 100644
index f2f8d29..0000000
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-msm/include/mach/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define PLAT_PHYS_OFFSET UL(0x00200000)
-#elif defined(CONFIG_ARCH_MSM8X60)
-#define PLAT_PHYS_OFFSET UL(0x40200000)
-#elif defined(CONFIG_ARCH_MSM8960)
-#define PLAT_PHYS_OFFSET UL(0x40200000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif
-
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 1a1af9e..7276595 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -156,6 +156,12 @@
{
unsigned int i, ncores = get_core_count();
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f1..afeeca5 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
void __iomem *global_counter;
void __iomem *local_counter;
+ union {
+ struct clock_event_device *evt;
+ struct clock_event_device __percpu **percpu_evt;
+ };
};
enum {
@@ -87,13 +91,10 @@
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -171,13 +172,7 @@
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -261,10 +250,30 @@
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = clock->irq;
+ if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+ if (!clock->percpu_evt) {
+ pr_err("msm_timer_init: memory allocation "
+ "failed for %s\n", ce->name);
+ continue;
+ }
+
+ *__this_cpu_ptr(clock->percpu_evt) = ce;
+ res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+ ce->name, clock->percpu_evt);
+ if (!res)
+ enable_percpu_irq(ce->irq, 0);
+ } else {
+ clock->evt = ce;
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, &clock->evt);
+ }
+
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -273,6 +282,7 @@
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
/* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
+ if (!local_timer_inited) {
writel(0, clock->regbase + TIMER_ENABLE);
writel(0, clock->regbase + TIMER_CLEAR);
writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ local_timer_inited = true;
}
- evt->irq = clock->irq.irq;
+ evt->irq = clock->irq;
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
-
- gic_enable_ppi(clock->irq.irq);
+ *__this_cpu_ptr(clock->percpu_evt) = evt;
+ enable_percpu_irq(evt->irq, 0);
clockevents_register_device(evt);
return 0;
}
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 1;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
}
#endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@
MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 0489142..a7df02b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MV78XX0_REGS_PHYS_BASE
ldr \rv, =MV78XX0_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
deleted file mode 100644
index a648c51..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 3d4c313..af0c212 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -56,6 +56,15 @@
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
@@ -171,6 +180,18 @@
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 9565304..0fc6080 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -21,3 +21,6 @@
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index e28d0e1..1fc1103 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -290,7 +290,7 @@
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5276660..52a11c1 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -328,7 +328,7 @@
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 067d8c4..0578390 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -168,7 +168,7 @@
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 4231d98..5c83760 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -349,6 +349,12 @@
.wp_type = ESDHC_WP_GPIO,
};
+void __init imx51_babbage_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+}
+
/*
* Board specific initialization.
*/
@@ -363,8 +369,7 @@
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
+ imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, NULL);
@@ -414,7 +419,7 @@
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 90ae903..a9e4866 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -285,7 +285,7 @@
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index c26508a..38c4a3e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -280,7 +280,7 @@
};
MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 614edcb..0d7f0ff 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -171,9 +171,6 @@
static void __init mx53_ard_io_init(void)
{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
-
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
gpio_direction_input(ARD_ETHERNET_INT_B);
@@ -216,6 +213,13 @@
return 0;
}
+void __init imx53_ard_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+ weim_cs_config();
+}
+
static struct platform_device *devices[] __initdata = {
&ard_smsc_lan9220_device,
};
@@ -225,8 +229,8 @@
imx53_soc_init();
imx53_add_imx_uart(0, NULL);
+ imx53_ard_common_init();
mx53_ard_io_init();
- weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6a3e616..6bea31a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -131,12 +131,17 @@
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
+void __init imx53_evk_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+ ARRAY_SIZE(mx53_evk_pads));
+}
+
static void __init mx53_evk_board_init(void)
{
imx53_soc_init();
+ imx53_evk_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0af2766..7678f77 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -263,6 +263,12 @@
.num_leds = ARRAY_SIZE(mx53loco_leds),
};
+void __init imx53_qsb_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+ ARRAY_SIZE(mx53_loco_pads));
+}
+
static struct i2c_board_info mx53loco_i2c_devices[] = {
{
I2C_BOARD_INFO("mma8450", 0x1C),
@@ -273,9 +279,8 @@
{
int ret;
imx53_soc_init();
+ imx53_qsb_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index d12fd30..59c0845 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -125,12 +125,17 @@
}
}
+void __init imx53_smd_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+ ARRAY_SIZE(mx53_smd_pads));
+}
+
static void __init mx53_smd_board_init(void)
{
imx53_soc_init();
+ imx53_smd_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index b94879e..2aacf41 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
#include <asm/div64.h>
@@ -1632,3 +1633,41 @@
MX53_INT_GPT);
return 0;
}
+
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..ccc6158
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 4; /* imx51 gets 4 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx51_irq_match[] __initconst = {
+ { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx51_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx51_irq_match);
+
+ node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx51_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init_dt();
+}
+
+static struct sys_timer imx51_timer = {
+ .init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+ "fsl,imx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .map_io = mx51_map_io,
+ .init_early = imx51_init_early,
+ .init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
+ .timer = &imx51_timer,
+ .init_machine = imx51_dt_init,
+ .dt_compat = imx51_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
new file mode 100644
index 0000000..ccaa0b8
--- /dev/null
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx53 gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx53_irq_match[] __initconst = {
+ { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx53_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx53_irq_match);
+
+ node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx53_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53-ard",
+ "fsl,imx53-evk",
+ "fsl,imx53-qsb",
+ "fsl,imx53-smd",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1..714570d 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -30,7 +30,7 @@
#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
deleted file mode 100644
index b5420a5..0000000
--- a/arch/arm/mach-mxs/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_MEMORY_H__
-#define __MACH_MXS_MEMORY_H__
-
-#define PHYS_OFFSET UL(0x40000000)
-
-#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a9152..247781e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00000a00
orr \rv, \rp, #io_p2v(0x00100000) @ virtual
orr \rp, \rp, #0x00100000 @ physical
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
deleted file mode 100644
index 5956149..0000000
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 1399303..398a75f 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -276,7 +276,7 @@
MACHINE_START(NOMADIK, "NHK8815")
/* Maintainer: ST MicroElectronics */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
.timer = &nomadik_timer,
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4..7354179 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
add \rp, \rp, #0x000fb000
add \rv, \rp, #0xf0000000 @ virtual base
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
deleted file mode 100644
index d332521..0000000
--- a/arch/arm/mach-nomadik/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * mach-nomadik/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
deleted file mode 100644
index ef9864b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d702570..1f741b1 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@
MACHINE_START(NUC932EVB, "NUC932EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc932evb_map_io,
.init_irq = nuc93x_init_irq,
.init_machine = nuc932evb_init,
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..11c85cd 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 312ea6b..eb36b25 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -386,7 +386,7 @@
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = ams_delta_map_io,
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a6b1bea..999789c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -389,7 +389,7 @@
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 04fc356..23cc9e4 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -94,7 +94,7 @@
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_generic_map_io,
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7fb1a..6c70c28 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,7 +461,7 @@
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h2_map_io,
.reserve = omap_reserve,
.init_irq = h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 31f3487..8e2b64a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -449,7 +449,7 @@
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h3_map_io,
.reserve = omap_reserve,
.init_irq = h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 36e06ea..e81ead1 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -611,7 +611,7 @@
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = htcherald_map_io,
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 0b1ba46..8b03459 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -459,7 +459,7 @@
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = innovator_map_io,
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 5469ce2..6825635 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -264,7 +264,7 @@
}
MACHINE_START(NOKIA770, "Nokia 770")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_nokia770_map_io,
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b08a213..44b8e93 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -583,7 +583,7 @@
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = osk_map_io,
.reserve = omap_reserve,
.init_irq = osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 459cb6b..3d8cd90 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -275,7 +275,7 @@
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmte_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index b214f45..d0eefe8 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmtt_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9b0ea48..98e79bc 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmz71_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 67acd41..ad3a156 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -350,7 +350,7 @@
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 9c3b7c5..602b55c 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -421,7 +421,7 @@
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_sx1_map_io,
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 036edc0e..8016515 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = voiceblue_map_io,
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6285604..2b36a28 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
@@ -31,26 +26,24 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-9: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+9: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ and \rp, pc, #0xff000000
+ ldr \rv, =OMAP_UART_INFO_OFS
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rp, #0 @ no port configured?
@@ -74,17 +67,18 @@
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0xff000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0xff000000 @ phys base
add \rp, \rp, #0xfe000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
b 9b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index e9b600c..c633764 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -2,4 +2,55 @@
* arch/arm/mach-omap1/include/mach/memory.h
*/
-#include <plat/memory.h>
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET UL(0x10000000)
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET UL(0x30000000)
+
+#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn) \
+ ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+ if (is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+ __dma; })
+
+#define __arch_dma_to_pfn(dev, addr) \
+ ({ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
+ __phys_to_pfn(__dma); \
+ })
+
+#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
+ (dma_addr_t) (is_lbus_device(dev) ? \
+ virt_to_lbus(__addr) : \
+ __virt_to_phys(__addr)); })
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a..1cfa1b6 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,6 +121,7 @@
#endif
omap_sram_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..91f9abb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -78,6 +79,17 @@
.free = omap1_mcbsp_free,
};
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
@@ -369,6 +381,39 @@
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
new file mode 100644
index 0000000..6e90665
--- /dev/null
+++ b/arch/arm/mach-omap1/timer.c
@@ -0,0 +1,173 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE 0xfffb1400
+#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE 0xfffb2400
+#define OMAP1610_GPTIMER4_BASE 0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE 0xfffb3400
+#define OMAP1610_GPTIMER6_BASE 0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE 0xfffb7400
+#define OMAP1610_GPTIMER8_BASE 0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT 8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+ int source)
+{
+ int n = (pdev->id - 1) << 1;
+ u32 l;
+
+ l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l |= source << n;
+ __raw_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+ int i;
+ int ret;
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+
+ if (!cpu_is_omap16xx())
+ return 0;
+
+ for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+ struct resource res[2];
+ u32 base, irq;
+
+ switch (i) {
+ case 1:
+ base = OMAP1610_GPTIMER1_BASE;
+ irq = INT_1610_GPTIMER1;
+ break;
+ case 2:
+ base = OMAP1610_GPTIMER2_BASE;
+ irq = INT_1610_GPTIMER2;
+ break;
+ case 3:
+ base = OMAP1610_GPTIMER3_BASE;
+ irq = INT_1610_GPTIMER3;
+ break;
+ case 4:
+ base = OMAP1610_GPTIMER4_BASE;
+ irq = INT_1610_GPTIMER4;
+ break;
+ case 5:
+ base = OMAP1610_GPTIMER5_BASE;
+ irq = INT_1610_GPTIMER5;
+ break;
+ case 6:
+ base = OMAP1610_GPTIMER6_BASE;
+ irq = INT_1610_GPTIMER6;
+ break;
+ case 7:
+ base = OMAP1610_GPTIMER7_BASE;
+ irq = INT_1610_GPTIMER7;
+ break;
+ case 8:
+ base = OMAP1610_GPTIMER8_BASE;
+ irq = INT_1610_GPTIMER8;
+ break;
+ default:
+ /*
+ * not supposed to reach here.
+ * this is to remove warning.
+ */
+ return -EINVAL;
+ }
+
+ pdev = platform_device_alloc("omap_timer", i);
+ if (!pdev) {
+ pr_err("%s: Failed to device alloc for dmtimer%d\n",
+ __func__, i);
+ return -ENOMEM;
+ }
+
+ memset(res, 0, 2 * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + 0x46;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = irq;
+ res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+ ret = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+ __func__);
+ goto err_free_pdev;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_pdata;
+ }
+
+ pdata->set_timer_src = omap1_dm_timer_set_src;
+ pdata->needs_manual_reset = 1;
+
+ ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ dev_dbg(&pdev->dev, " Registered.\n");
+ }
+
+ return 0;
+
+err_free_pdata:
+ kfree(pdata);
+
+err_free_pdev:
+ platform_device_unregister(pdev);
+
+ return ret;
+}
+arch_initcall(omap1_dm_timer_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 57b66d5..e0a318d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -106,9 +106,13 @@
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
- bool "Generic OMAP board"
- depends on ARCH_OMAP2
+ bool "Generic OMAP2+ board"
+ depends on ARCH_OMAP2PLUS
+ select USE_OF
default y
+ help
+ Support for generic TI OMAP2+ boards using Flattened Device Tree.
+ More information at Documentation/devicetree
config MACH_OMAP2_TUSB6010
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f343365..5129785 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -89,14 +89,13 @@
vp44xx_data.o
# OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
-voltagedomain-common := voltage.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
+ voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
-endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -116,9 +115,12 @@
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+ clockdomains2xxx_3xxx_data.o \
+ clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomain44xx.o \
clockdomains44xx_data.o
@@ -185,78 +187,66 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- hsmmc.o \
- board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o \
- hsmmc.o
+ sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
- board-rx51-video.o \
- hsmmc.o
+ board-rx51-video.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- board-zoom-display.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- hsmmc.o
+ board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o \
+ omap_phy_internal.o
+
+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
- omap_phy_internal.o \
+ omap_phy_internal.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
- hsmmc.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+
# Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
+obj-y += $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
+obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2028464..638cecb 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,12 +141,6 @@
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -193,7 +187,8 @@
{
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap2_pmic_init("twl4030", &sdp2430_twldata);
+ omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ &sdp2430_twldata);
return 0;
}
@@ -235,6 +230,7 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
@@ -248,18 +244,12 @@
"Secondary LCD backlight");
}
-static void __init omap_2430sdp_map_io(void)
-{
- omap2_set_globals_243x();
- omap243x_map_common_io();
-}
-
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..5b5999c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -225,12 +225,6 @@
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -719,6 +713,7 @@
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
+ omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -729,10 +724,10 @@
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b5..f552305 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -70,13 +70,6 @@
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -215,10 +210,10 @@
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c7cef44..6d2b614 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -129,7 +129,7 @@
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
@@ -389,12 +389,6 @@
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -809,6 +803,7 @@
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
@@ -830,18 +825,12 @@
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e935..7834536 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,12 +47,6 @@
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -98,10 +93,10 @@
}
MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..65a5912 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -362,11 +362,6 @@
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -490,10 +486,10 @@
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7021170..29c409b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -273,12 +273,6 @@
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@ -340,20 +334,15 @@
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
-}
-
-static void __init omap_apollon_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
+ omap_sdrc_init(NULL, NULL);
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..5665e68 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -471,13 +471,6 @@
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
@@ -634,20 +629,20 @@
}
MACHINE_START(CM_T35, "Compulab CM-T35")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4..3f4dc66 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -251,12 +251,6 @@
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
@@ -299,10 +294,10 @@
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec..556df32 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -397,19 +397,6 @@
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
- omap3_init_irq();
-}
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_dm9000_init();
@@ -667,11 +656,11 @@
}
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
- .init_irq = devkit8000_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index aa1b0cb..30a6f52 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,11 +148,6 @@
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c240a3f..d25503a 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -24,7 +24,26 @@
int nr_parts;
};
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+ char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 54db41a..0c42797 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,76 +1,158 @@
/*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
};
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+ { .compatible = "ti,omap3-intc", },
+ { .compatible = "arm,cortex-a9-gic", },
+ { }
+};
+
static void __init omap_generic_init(void)
{
+ struct device_node *node = of_find_matching_node(NULL, intc_match);
+ if (node)
+ irq_domain_add_simple(node, 0);
+
omap_serial_init();
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
+ omap_sdrc_init(NULL, NULL);
+
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
{
- if (cpu_is_omap242x()) {
- omap2_set_globals_242x();
- omap242x_map_common_io();
- } else if (cpu_is_omap243x()) {
- omap2_set_globals_243x();
- omap243x_map_common_io();
- } else if (cpu_is_omap34xx()) {
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
- } else if (cpu_is_omap44xx()) {
- omap2_set_globals_443x();
- omap44xx_map_common_io();
- }
+ omap4_i2c_init();
+ omap_generic_init();
}
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
- /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+static void __init omap3_init(void)
+{
+ omap3_i2c_init();
+ omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+ "ti,omap2420",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_generic_map_io,
- .init_early = omap_generic_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
+ .dt_compat = omap242x_boards_compat,
MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+ "ti,omap2430",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap2_timer,
+ .dt_compat = omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+ "ti,omap3",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = omap3_init,
+ .timer = &omap3_timer,
+ .dt_compat = omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_boards_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 45de2b3..fe75c19 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -290,17 +290,6 @@
{ OMAP_TAG_LCD, &h4_lcd_config },
};
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
- omap2_init_irq();
-}
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -371,22 +360,17 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
}
-static void __init omap_h4_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
- .init_irq = omap_h4_init_irq,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
+ .init_irq = omap2_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..e20cad6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -491,13 +491,6 @@
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
+ omap_sdrc_init(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
usb_musb_init(NULL);
igep_flash_init();
@@ -672,20 +667,20 @@
}
MACHINE_START(IGEP0020, "IGEP v2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 218764c..0fa28be 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -193,12 +193,6 @@
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -325,6 +319,7 @@
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -333,10 +328,10 @@
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5..e9d5f4a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -616,18 +616,6 @@
},
};
-static void __init n8x0_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -689,36 +677,37 @@
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..0b8e0fc 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -447,13 +447,6 @@
static void __init omap3_beagle_init_early(void)
{
omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -493,8 +486,8 @@
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap2_get_mpuss_device();
- iva_dev = omap2_get_iva_device();
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ iva_dev = omap_device_get_by_hwmod_name("iva");
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -534,6 +527,8 @@
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -557,11 +552,11 @@
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_beagle_init_early,
- .init_irq = omap3_beagle_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..aa6a935 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -520,12 +520,6 @@
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -640,6 +634,7 @@
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
@@ -681,10 +676,10 @@
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5..7c0f193 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -182,12 +182,6 @@
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
board_mmc_init();
board_smsc911x_init();
@@ -209,18 +204,18 @@
}
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd..fed2f7d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -525,13 +525,6 @@
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -606,10 +601,10 @@
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..170e1eb 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -428,17 +428,6 @@
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -478,6 +467,7 @@
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -494,10 +484,10 @@
MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg@ema-tech.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
- .init_irq = omap3_stalker_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea04..c2d5348 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -326,18 +326,6 @@
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&omap3_touchbook_lcd_device,
&leds_gpio,
@@ -385,6 +373,8 @@
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -404,11 +394,11 @@
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
- .init_irq = omap3_touchbook_init_irq,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..2141894 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -95,12 +95,6 @@
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..9f13dc2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -478,13 +478,6 @@
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -514,6 +507,8 @@
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(NULL);
@@ -561,10 +556,10 @@
}
MACHINE_START(OVERO, "Gumstix Overo")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24..616fb39 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -123,15 +123,6 @@
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@
static void __init rm680_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(NULL);
rm680_peripherals_init();
}
-static void __init rm680_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f..74c8aad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -102,15 +102,6 @@
{ OMAP_TAG_LCD, &rx51_lcd_config },
};
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -127,11 +118,17 @@
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
@@ -142,12 +139,6 @@
platform_device_register(&leds_gpio);
}
-static void __init rx51_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
@@ -156,10 +147,10 @@
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = rx51_reserve,
- .map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0..e26c79c 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -27,15 +27,10 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = ti8168_evm_config;
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
@@ -48,9 +43,9 @@
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c..be6684d 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -34,17 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
- if (machine_is_omap_zoom2())
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- else if (machine_is_omap_zoom3())
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -129,24 +118,32 @@
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
zoom_debugboard_init();
zoom_peripherals_init();
+
+ if (machine_is_omap_zoom2())
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
zoom_display_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index debc040..14a6277 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,6 +1898,54 @@
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 96a942e..ea6717c 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,6 +1998,54 @@
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index b9b8446..65dd363 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,6 +3464,42 @@
CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX),
+ CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX),
};
@@ -3472,7 +3508,16 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ /*
+ * 3505 must be tested before 3517, since 3517 returns true
+ * for both AM3517 chips and AM3517 family chips, which
+ * includes 3505. Unfortunately there's no obvious family
+ * test for 3517/3505 :-(
+ */
+ if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_34XX;
+ cpu_clkflg = CK_3505;
+ } else if (cpu_is_omap3517()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_3517;
} else if (cpu_is_omap3505()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c0b6fbd..946bf04 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3363,6 +3363,39 @@
CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
+ CLK("omap_timer.1", "fck", &timer1_fck, CK_443X),
+ CLK("omap_timer.2", "fck", &timer2_fck, CK_443X),
+ CLK("omap_timer.3", "fck", &timer3_fck, CK_443X),
+ CLK("omap_timer.4", "fck", &timer4_fck, CK_443X),
+ CLK("omap_timer.5", "fck", &timer5_fck, CK_443X),
+ CLK("omap_timer.6", "fck", &timer6_fck, CK_443X),
+ CLK("omap_timer.7", "fck", &timer7_fck, CK_443X),
+ CLK("omap_timer.8", "fck", &timer8_fck, CK_443X),
+ CLK("omap_timer.9", "fck", &timer9_fck, CK_443X),
+ CLK("omap_timer.10", "fck", &timer10_fck, CK_443X),
+ CLK("omap_timer.11", "fck", &timer11_fck, CK_443X),
+ CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8f08906..8480ee4 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -73,9 +73,6 @@
if (!clkdm || !clkdm->name)
return -EINVAL;
- if (!omap_chip_is(clkdm->omap_chip))
- return -EINVAL;
-
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@
{
struct clkdm_dep *cd;
- if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ if (!clkdm || !deps)
return ERR_PTR(-EINVAL);
for (cd = deps; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
if (!cd->clkdm && cd->clkdm_name)
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -148,9 +142,6 @@
if (!autodep)
return;
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
clkdm = clkdm_lookup(autodep->clkdm.name);
if (!clkdm) {
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -216,9 +204,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -243,8 +228,6 @@
struct clkdm_dep *cd;
for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (cd->clkdm)
continue;
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@
/* Public functions */
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
*
- * Set up internal state. If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those. No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs. Should be called
+ * before any other clkdm_register*() function. Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_autodep *init_autodeps,
- struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+ if (!co)
+ return -EINVAL;
+
+ if (arch_clkdm)
+ return -EEXIST;
+
+ arch_clkdm = co;
+
+ return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC. Must
+ * be called after clkdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
{
struct clockdomain **c = NULL;
- struct clockdomain *clkdm;
- struct clkdm_autodep *autodep = NULL;
- if (!custom_funcs)
- WARN(1, "No custom clkdm functions registered\n");
- else
- arch_clkdm = custom_funcs;
+ if (!arch_clkdm)
+ return -EACCES;
- if (clkdms)
- for (c = clkdms; *c; c++)
- _clkdm_register(*c);
+ if (!cs)
+ return -EINVAL;
- autodeps = init_autodeps;
+ for (c = cs; *c; c++)
+ _clkdm_register(*c);
+
+ return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies." These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy. However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+ struct clkdm_autodep *a = NULL;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
+ if (!ia)
+ return -EINVAL;
+
if (autodeps)
- for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
- _autodep_lookup(autodep);
+ return -EEXIST;
- /*
- * Put all clockdomains into software-supervised mode; PM code
- * should later enable hardware-supervised mode as appropriate
- */
+ autodeps = ia;
+ for (a = autodeps; a->clkdm.ptr; a++)
+ _autodep_lookup(a);
+
+ return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate. Must be
+ * called after clkdm_register_clkdms(). Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
+ */
+int clkdm_complete_init(void)
+{
+ struct clockdomain *clkdm;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
list_for_each_entry(clkdm, &clkdm_list, node) {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@
_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
clkdm_clear_all_sleepdeps(clkdm);
}
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 1e50c88..f7b5860 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -45,7 +45,6 @@
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@
const char *name;
struct clockdomain *ptr;
} clkdm;
- const struct omap_chip_id omap_chip;
};
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
@@ -81,7 +78,6 @@
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
};
/* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
*
@@ -126,7 +121,6 @@
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
spinlock_t lock;
@@ -166,8 +160,11 @@
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
- struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
#endif
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f740edb..a0d68db 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
@@ -98,8 +96,6 @@
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index b43706a..935c7f0 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
new file mode 100644
index 0000000..0ab8e46
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -0,0 +1,154 @@
+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = mpu_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
+ NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+ if (!cpu_is_omap242x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap242x);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
new file mode 100644
index 0000000..3645ed0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -0,0 +1,181 @@
+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = mpu_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
+ NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+ if (!cpu_is_omap243x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap243x);
+ clkdm_complete_init();
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 13bde95..0a6a048 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 clockdomains
+ * OMAP2/3 clockdomain common data
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -51,374 +51,28 @@
* changed in software) are not included here yet, but should be.
*/
-/* OMAP2/3-common wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 24XX-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP2
-
/* Wakeup dependency source arrays */
-/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
-static struct clkdm_dep dsp_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
+/* 2xxx-specific possible dependencies */
+
+/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
+struct clkdm_dep gfx_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep mpu_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
+/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
+struct clkdm_dep dsp_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep core_24xx_wkdeps[] = {
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-/* 2430-specific possible wakeup dependencies */
-
-#ifdef CONFIG_SOC_OMAP2430
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/* OMAP3-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* OMAP2/3-common clockdomains
@@ -430,439 +84,18 @@
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
-static struct clockdomain wkup_clkdm = {
+struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain prm_clkdm = {
+struct clockdomain prm_common_clkdm = {
.name = "prm_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain cm_clkdm = {
+struct clockdomain cm_common_clkdm = {
.name = "cm_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-
-/*
- * 2420-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-#endif /* CONFIG_SOC_OMAP2420 */
-
-
-/*
- * 2430-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/*
- * OMAP3 clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct clockdomain mpu_3xxx_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_3xxx_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain neon_clkdm = {
- .name = "neon_clkdm",
- .pwrdm = { .name = "neon_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = neon_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain iva2_clkdm = {
- .name = "iva2_clkdm",
- .pwrdm = { .name = "iva2_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
-};
-
-static struct clockdomain sgx_clkdm = {
- .name = "sgx_clkdm",
- .pwrdm = { .name = "sgx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM. It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
- .name = "d2d_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "dss_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = dss_wkdeps,
- .sleepdep_srcs = dss_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain cam_clkdm = {
- .name = "cam_clkdm",
- .pwrdm = { .name = "cam_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = cam_wkdeps,
- .sleepdep_srcs = cam_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain usbhost_clkdm = {
- .name = "usbhost_clkdm",
- .pwrdm = { .name = "usbhost_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = usbhost_wkdeps,
- .sleepdep_srcs = usbhost_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-static struct clockdomain per_clkdm = {
- .name = "per_clkdm",
- .pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_wkdeps,
- .sleepdep_srcs = per_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
- .name = "emu_clkdm",
- .pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll1_clkdm = {
- .name = "dpll1_clkdm",
- .pwrdm = { .name = "dpll1_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll2_clkdm = {
- .name = "dpll2_clkdm",
- .pwrdm = { .name = "dpll2_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll3_clkdm = {
- .name = "dpll3_clkdm",
- .pwrdm = { .name = "dpll3_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll4_clkdm = {
- .name = "dpll4_clkdm",
- .pwrdm = { .name = "dpll4_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll5_clkdm = {
- .name = "dpll5_clkdm",
- .pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/*
- * Clockdomain hwsup dependencies (OMAP3 only)
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
- {
- .clkdm = { .name = "mpu_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = "iva2_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = NULL },
- }
-};
-
-static struct clockdomain *clockdomains_omap2[] __initdata = {
- &wkup_clkdm,
- &cm_clkdm,
- &prm_clkdm,
-
-#ifdef CONFIG_SOC_OMAP2420
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
- &mpu_3xxx_clkdm,
- &neon_clkdm,
- &iva2_clkdm,
- &gfx_3430es1_clkdm,
- &sgx_clkdm,
- &d2d_clkdm,
- &core_l3_3xxx_clkdm,
- &core_l4_3xxx_clkdm,
- &dss_3xxx_clkdm,
- &cam_clkdm,
- &usbhost_clkdm,
- &per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
- &dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
- &dpll5_clkdm,
-#endif
- NULL,
-};
-
-void __init omap2xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
-}
-
-void __init omap3xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
-}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
new file mode 100644
index 0000000..b84e138
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm", },
+ { .clkdm_name = "mpu_clkdm", },
+ { .clkdm_name = "wkup_clkdm", },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm = { .name = "neon_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = neon_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = "iva2_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_3xxx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
+ &cam_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+ &gfx_3430es1_clkdm,
+ NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+ &sgx_clkdm,
+ &dpll5_clkdm,
+ &usbhost_clkdm,
+ NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+ struct clockdomain **sc;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ clkdm_register_platform_funcs(&omap3_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap3430_common);
+
+ sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+ clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+
+ clkdm_register_autodeps(clkdm_autodeps);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index dccc651..9299ac2 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -34,350 +34,122 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep tesla_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
@@ -388,7 +160,6 @@
.cm_inst = OMAP4430_CM2_CEFUSE_INST,
.clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_cfg_44xx_clkdm = {
@@ -399,7 +170,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
.dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain tesla_44xx_clkdm = {
@@ -412,7 +182,6 @@
.wkdep_srcs = tesla_wkup_sleep_deps,
.sleepdep_srcs = tesla_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_gfx_44xx_clkdm = {
@@ -425,7 +194,6 @@
.wkdep_srcs = l3_gfx_wkup_sleep_deps,
.sleepdep_srcs = l3_gfx_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ivahd_44xx_clkdm = {
@@ -438,7 +206,6 @@
.wkdep_srcs = ivahd_wkup_sleep_deps,
.sleepdep_srcs = ivahd_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_secure_44xx_clkdm = {
@@ -451,7 +218,6 @@
.wkdep_srcs = l4_secure_wkup_sleep_deps,
.sleepdep_srcs = l4_secure_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_per_44xx_clkdm = {
@@ -462,7 +228,6 @@
.clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
.dep_bit = OMAP4430_L4PER_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain abe_44xx_clkdm = {
@@ -473,7 +238,6 @@
.clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS,
.dep_bit = OMAP4430_ABE_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_instr_44xx_clkdm = {
@@ -482,7 +246,6 @@
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_init_44xx_clkdm = {
@@ -495,7 +258,6 @@
.wkdep_srcs = l3_init_wkup_sleep_deps,
.sleepdep_srcs = l3_init_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain d2d_44xx_clkdm = {
@@ -507,7 +269,6 @@
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu0_44xx_clkdm = {
@@ -517,7 +278,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU0_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu1_44xx_clkdm = {
@@ -527,7 +287,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU1_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_emif_44xx_clkdm = {
@@ -538,7 +297,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
.dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_ao_44xx_clkdm = {
@@ -548,7 +306,6 @@
.cm_inst = OMAP4430_CM2_ALWAYS_ON_INST,
.clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ducati_44xx_clkdm = {
@@ -561,7 +318,6 @@
.wkdep_srcs = ducati_wkup_sleep_deps,
.sleepdep_srcs = ducati_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
@@ -573,7 +329,6 @@
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
@@ -584,7 +339,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS,
.dep_bit = OMAP4430_L3_2_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_1_44xx_clkdm = {
@@ -595,7 +349,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS,
.dep_bit = OMAP4430_L3_1_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
@@ -607,7 +360,6 @@
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dss_44xx_clkdm = {
@@ -620,7 +372,6 @@
.wkdep_srcs = l3_dss_wkup_sleep_deps,
.sleepdep_srcs = l3_dss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_wkup_44xx_clkdm = {
@@ -631,7 +382,6 @@
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -641,7 +391,6 @@
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dma_44xx_clkdm = {
@@ -653,7 +402,6 @@
.wkdep_srcs = l3_dma_wkup_sleep_deps,
.sleepdep_srcs = l3_dma_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
@@ -685,7 +433,10 @@
NULL
};
+
void __init omap44xx_clockdomains_init(void)
{
- clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations);
+ clkdm_register_platform_funcs(&omap4_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap44xx);
+ clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 3f20cbb..de61f15 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -56,6 +56,12 @@
{
__omap2_set_globals(&omap242x_globals);
}
+
+void __init omap242x_map_io(void)
+{
+ omap2_set_globals_242x();
+ omap242x_map_common_io();
+}
#endif
#if defined(CONFIG_SOC_OMAP2430)
@@ -74,6 +80,12 @@
{
__omap2_set_globals(&omap243x_globals);
}
+
+void __init omap243x_map_io(void)
+{
+ omap2_set_globals_243x();
+ omap243x_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP3)
@@ -138,5 +150,11 @@
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
+
+void __init omap4_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap44xx_map_common_io();
+}
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad6..0f8e0eb 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -44,7 +45,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -61,12 +62,12 @@
if (!oh)
pr_err("could not look up %s\n", oh_name);
- od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+ pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap3_l3_init);
@@ -74,9 +75,13 @@
{
int l, i;
struct omap_hwmod *oh[3];
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
@@ -92,12 +97,12 @@
pr_err("could not look up %s\n", oh_name);
}
- od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+ pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap4_l3_init);
@@ -221,18 +226,10 @@
#endif
}
-struct omap_device_pm_latency omap_keyboard_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
struct omap4_keypad_platform_data *keypad_data;
unsigned int id = -1;
@@ -247,15 +244,13 @@
keypad_data = sdp4430_keypad_data;
- od = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data),
- omap_keyboard_latency,
- ARRAY_SIZE(omap_keyboard_latency), 0);
+ pdev = omap_device_build(name, id, oh, keypad_data,
+ sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
@@ -263,18 +258,10 @@
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
- [0] = {
- .activate_func = omap_device_enable_hwmods,
- .deactivate_func = omap_device_idle_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
@@ -282,10 +269,9 @@
return;
}
- od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
- mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
- WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
- __func__, PTR_ERR(od));
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
+ __func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
@@ -334,17 +320,9 @@
#include <plat/mcspi.h>
-struct omap_device_pm_latency omap_mcspi_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
@@ -371,10 +349,9 @@
}
spi_num++;
- od = omap_device_build(name, spi_num, oh, pdata,
- sizeof(*pdata), omap_mcspi_latency,
- ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+ pdev = omap_device_build(name, spi_num, oh, pdata,
+ sizeof(*pdata), NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -698,18 +675,10 @@
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int __init omap_init_wdt(void)
{
int id = -1;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
@@ -723,10 +692,8 @@
return -EINVAL;
}
- od = omap_device_build(dev_name, id, oh, NULL, 0,
- omap_wdt_latency,
- ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a23..8ad0a2f 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -35,14 +35,6 @@
},
};
-static struct omap_device_pm_latency omap_dss_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -78,7 +70,7 @@
{
int r = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -108,13 +100,12 @@
return -ENODEV;
}
- od = omap_device_build(curr_dss_hwmod[i].dev_name,
+ pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
- omap_dss_latency,
- ARRAY_SIZE(omap_dss_latency), 0);
+ NULL, 0, 0);
- if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+ if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index c9ff0e7..a59a45a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@
[CCDN] = 0xd8,
};
-static struct omap_device_pm_latency omap2_dma_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
@@ -228,7 +220,7 @@
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_system_dma_plat_info *p;
struct resource *mem;
char *name = "omap_dma_system";
@@ -258,23 +250,22 @@
p->errata = configure_dma_errata();
- od = omap_device_build(name, 0, oh, p, sizeof(*p),
- omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
kfree(p);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
- dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
@@ -283,7 +274,7 @@
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
return 0;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2765cdc..8cbfbc2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,17 +24,9 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static struct omap_device_pm_latency omap_gpio_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
@@ -107,19 +99,17 @@
return -EINVAL;
}
- od = omap_device_build(name, id - 1, oh, pdata,
- sizeof(*pdata), omap_gpio_latency,
- ARRAY_SIZE(omap_gpio_latency),
- false);
+ pdev = omap_device_build(name, id - 1, oh, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
gpio_bank_count++;
return 0;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9b45c7..7708584 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -137,8 +137,7 @@
*/
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
@@ -156,8 +155,7 @@
else
reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
timeout = jiffies + msecs_to_jiffies(5);
@@ -171,16 +169,14 @@
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
- reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
} else {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_MMC1_PBIASLITE_VMODE_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PBIASLITE_VMODE_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
}
@@ -413,31 +409,17 @@
return 0;
}
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
- /*
- * XXX There should also be an entry here to power off/on the
- * MMC regulators/PBIAS cells, etc.
- */
-};
-
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
- struct omap_device *od;
- struct omap_device_pm_latency *ohl;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
int l;
- int ohl_cnt = 0;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
@@ -452,8 +434,6 @@
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
- ohl = omap_hsmmc_latency;
- ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
@@ -471,9 +451,9 @@
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
+ sizeof(struct omap_mmc_platform_data), NULL, 0, false);
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
@@ -482,7 +462,7 @@
* return device handle to board setup code
* required to populate for regulator framework structure
*/
- hsmmcinfo->dev = &od->pdev.dev;
+ hsmmcinfo->dev = &pdev->dev;
done:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 06d4a80..36e2109 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -23,19 +23,11 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-struct omap_device_pm_latency omap_spinlock_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- }
-};
-
int __init hwspinlocks_init(void)
{
int retval = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
@@ -48,13 +40,11 @@
if (oh == NULL)
return -EINVAL;
- od = omap_device_build(dev_name, 0, oh, NULL, 0,
- omap_spinlock_latency,
- ARRAY_SIZE(omap_spinlock_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
- retval = PTR_ERR(od);
+ retval = PTR_ERR(pdev);
}
return retval;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37efb86..d27daf9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,7 +28,6 @@
#include "control.h"
-static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap_features;
@@ -39,19 +38,6 @@
}
EXPORT_SYMBOL(omap_rev);
-/**
- * omap_chip_is - test whether currently running OMAP matches a chip type
- * @oc: omap_chip_t to test against
- *
- * Test whether the currently-running OMAP chip matches the supplied
- * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
- */
-int omap_chip_is(struct omap_chip_id oci)
-{
- return (oci.oc & omap_chip.oc) ? 1 : 0;
-}
-EXPORT_SYMBOL(omap_chip_is);
-
int omap_type(void)
{
u32 val = 0;
@@ -242,14 +228,12 @@
omap_features = OMAP3_HAS_NEON;
}
-static void __init omap3_check_revision(void)
+static void __init omap3_check_revision(const char **cpu_rev)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
- omap_chip.oc = CHIP_IS_OMAP3430;
-
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -258,7 +242,7 @@
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ *cpu_rev = "1.0";
return;
}
@@ -279,77 +263,85 @@
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.0";
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.1";
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ *cpu_rev = "3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
-
- /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1.2";
}
break;
case 0xb868:
- /* Handle OMAP35xx/AM35xx devices
+ /*
+ * Handle OMAP/AM 3505/3517 devices
*
- * Set the device to be OMAP3505 here. Actual device
+ * Set the device to be OMAP3517 here. Actual device
* is identified later based on the features.
- *
- * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
- omap_revision = OMAP3505_REV(rev);
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP3517_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 1:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = OMAP3517_REV_ES1_1;
+ *cpu_rev = "1.1";
+ }
break;
case 0xb891:
/* Handle 36xx devices */
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
switch(rev) {
case 0: /* Take care of early samples */
omap_revision = OMAP3630_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
omap_revision = OMAP3630_REV_ES1_1;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+ *cpu_rev = "1.1";
break;
case 2:
+ /* FALLTHROUGH */
default:
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
}
break;
case 0xb81e:
- omap_chip.oc = CHIP_IS_TI816X;
-
switch (rev) {
case 0:
omap_revision = TI8168_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
- omap_revision = TI8168_REV_ES1_1;
- break;
+ /* FALLTHROUGH */
default:
- omap_revision = TI8168_REV_ES1_1;
+ omap_revision = TI8168_REV_ES1_1;
+ *cpu_rev = "1.1";
+ break;
}
break;
default:
- /* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ /* Unknown default to latest silicon rev as default */
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
+ pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
}
}
@@ -382,24 +374,20 @@
switch (rev) {
case 0:
omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
break;
case 1:
default:
omap_revision = OMAP4430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
break;
case 0xb95c:
switch (rev) {
case 3:
omap_revision = OMAP4430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
@@ -407,14 +395,12 @@
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -425,94 +411,33 @@
if (omap3_has_ ##feat()) \
printk(#feat" ");
-static void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(const char *cpu_rev)
{
- u8 rev = GET_OMAP_REVISION();
- char cpu_name[16], cpu_rev[16];
+ const char *cpu_name;
- /* OMAP3430 and OMAP3530 are assumed to be same.
+ /*
+ * OMAP3430 and OMAP3530 are assumed to be same.
*
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
- strcpy(cpu_name, "OMAP3630");
- } else if (cpu_is_omap3505()) {
- /*
- * AM35xx devices
- */
- if (omap3_has_sgx()) {
- omap_revision = OMAP3517_REV(rev);
- strcpy(cpu_name, "AM3517");
- } else {
- /* Already set in omap3_check_revision() */
- strcpy(cpu_name, "AM3505");
- }
+ cpu_name = "OMAP3630";
+ } else if (cpu_is_omap3517()) {
+ /* AM35xx devices */
+ cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
- strcpy(cpu_name, "TI816X");
+ cpu_name = "TI816X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
- strcpy(cpu_name, "OMAP3430/3530");
+ cpu_name = "OMAP3430/3530";
} else if (omap3_has_iva()) {
- omap_revision = OMAP3525_REV(rev);
- strcpy(cpu_name, "OMAP3525");
+ cpu_name = "OMAP3525";
} else if (omap3_has_sgx()) {
- omap_revision = OMAP3515_REV(rev);
- strcpy(cpu_name, "OMAP3515");
+ cpu_name = "OMAP3515";
} else {
- omap_revision = OMAP3503_REV(rev);
- strcpy(cpu_name, "OMAP3503");
- }
-
- if (cpu_is_omap3630() || cpu_is_ti816x()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "1.1");
- break;
- case OMAP_REVBITS_02:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.2");
- }
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.1");
- }
- } else {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "2.0");
- break;
- case OMAP_REVBITS_02:
- strcpy(cpu_rev, "2.1");
- break;
- case OMAP_REVBITS_03:
- strcpy(cpu_rev, "3.0");
- break;
- case OMAP_REVBITS_04:
- strcpy(cpu_rev, "3.1");
- break;
- case OMAP_REVBITS_05:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "3.1.2");
- }
+ cpu_name = "OMAP3503";
}
/* Print verbose information */
@@ -533,6 +458,8 @@
*/
void __init omap2_check_revision(void)
{
+ const char *cpu_rev;
+
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
@@ -540,7 +467,7 @@
if (cpu_is_omap24xx()) {
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
- omap3_check_revision();
+ omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
@@ -548,7 +475,7 @@
else
ti816x_check_features();
- omap3_cpuinfo();
+ omap3_cpuinfo(cpu_rev);
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
@@ -557,22 +484,6 @@
} else {
pr_err("OMAP revision unknown, please fix!\n");
}
-
- /*
- * OK, now we know the exact revision. Initialize omap_chip bits
- * for powerdowmain and clockdomain code.
- */
- if (cpu_is_omap243x()) {
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
- return;
- } else if (cpu_is_omap242x()) {
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
- return;
- }
-
- pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9..13f98e5 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,15 +13,10 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
@@ -34,26 +29,25 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ mov \rp, pc
+ ldr \rv, =OMAP_UART_INFO_OFS
+ and \rp, \rp, #0xff000000
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rp, #0 @ no port configured?
@@ -106,50 +100,47 @@
b 98f
83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
b 98f
+
95: ldr \rp, =ZOOM_UART_BASE
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
ldr \rp, =ZOOM_UART_VIRT
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100: /* Pass the UART_LSR reg address */
+ ldr \tmp, [\tmp, #8] @ omap_uart_lsr
+ add \rp, \rp, \tmp
+ add \rv, \rv, \tmp
.endm
.macro senduart,rd,rx
- strb \rd, [\rx]
+ orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
+ bic \rx, \rx, #0xff @ get base (THR) reg address
+ strb \rd, [\rx] @ send lower byte of rd
+ orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
+ bic \rd, \rd, #(0xff << 24) @ restore original rd
.endm
.macro busyuart,rd,rx
-1001: mrc p15, 0, \rd, c1, c0
- tst \rd, #1 @ MMU enabled?
- ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
- ldrne \rd, =omap_uart_lsr @ MMU enabled
- ldr \rd, [\rd, #0]
- ldrb \rd, [\rx, \rd]
+1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e..feb90a1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -101,18 +101,6 @@
it cs
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
deleted file mode 100644
index ca6d32a..0000000
--- a/arch/arm/mach-omap2/include/mach/memory.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/memory.h
- */
-
-#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6..f012730 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -38,6 +37,7 @@
#include "io.h"
#include <plat/omap-pm.h>
+#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
@@ -250,6 +250,7 @@
omap2_check_revision();
omap_sram_init();
+ omap_init_consistent_dma_size();
}
#ifdef CONFIG_SOC_OMAP2420
@@ -341,18 +342,22 @@
u8 postsetup_state;
if (cpu_is_omap242x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap2xxx_voltagedomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
omap2420_hwmod_init();
} else if (cpu_is_omap243x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
+ omap2xxx_voltagedomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
omap2430_hwmod_init();
} else if (cpu_is_omap34xx()) {
+ omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
} else if (cpu_is_omap44xx()) {
+ omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
@@ -376,7 +381,7 @@
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
- * omap2_init_common_infra() and omap2_init_common_devices().
+ * omap2_init_common_infra() and omap_sdrc_init().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
@@ -400,7 +405,47 @@
pr_err("Could not init clock framework - unknown SoC\n");
}
-void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+void __init omap2420_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_init_common_infrastructure();
+}
+
+void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a12f75..65f1be6 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -165,8 +165,8 @@
omap_irq_bank_init_one(bank);
- for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
- omap_alloc_gc(bank->base_reg + j, i, 32);
+ for (j = 0; j < bank->nr_irqs; j += 32)
+ omap_alloc_gc(bank->base_reg + j, j, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4a6ef6a..292eee3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -27,66 +27,69 @@
#include "control.h"
-/* McBSP internal signal muxing functions */
+/*
+ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
+ * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
+ */
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
+/* McBSP internal signal muxing function */
+static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == CLKR_SRC_CLKR)
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (mux == CLKR_SRC_CLKX)
- v |= OMAP2_MCBSP1_CLKR_MASK;
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- u32 v;
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP2_MCBSP1_CLKR_MASK;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP2_MCBSP1_FSR_MASK;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == FSR_SRC_FSR)
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (mux == FSR_SRC_FSX)
- v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+
+ return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
+ const char *src)
{
- struct omap_mcbsp *mcbsp;
struct clk *fck_src;
char *fck_src_name;
int r;
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
- fck_src = clk_get(mcbsp->dev, fck_src_name);
+ fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
- pm_runtime_put_sync(mcbsp->dev);
+ pm_runtime_put_sync(dev);
- r = clk_set_parent(mcbsp->fclk, fck_src);
+ r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
@@ -94,21 +97,30 @@
return -EINVAL;
}
- pm_runtime_get_sync(mcbsp->dev);
+ pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
+static int omap3_enable_st_clock(unsigned int id, bool enable)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (enable)
+ w &= ~(1 << (id - 2));
+ else
+ w |= 1 << (id - 2);
+ omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ return 0;
+}
static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
@@ -116,7 +128,7 @@
char *name = "omap-mcbsp";
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
- struct omap_device *od;
+ struct platform_device *pdev;
sscanf(oh->name, "mcbsp%d", &id);
@@ -126,7 +138,13 @@
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
+ pdata->reg_size = 2;
+ } else {
+ pdata->reg_size = 4;
+ pdata->has_ccr = true;
+ }
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -137,22 +155,28 @@
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
+ pdata->enable_st_clock = omap3_enable_st_clock;
count++;
}
- od = omap_device_build_ss(name, id, oh_device, count, pdata,
- sizeof(*pdata), omap2_mcbsp_latency,
- ARRAY_SIZE(omap2_mcbsp_latency), false);
+ pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index ce65e93..889464d 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -109,12 +109,10 @@
ncores = scu_get_core_count(scu_base);
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "OMAP4: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 84cc0bd..d713807 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1954,9 +1954,6 @@
i = 0;
do {
- if (!omap_chip_is(ohs[i]->omap_chip))
- continue;
-
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..6d72062 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -100,7 +100,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
.slaves = omap2420_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -206,7 +205,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -227,7 +225,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -243,7 +240,6 @@
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -271,7 +267,16 @@
.class = &iva_hwmod_class,
.masters = omap2420_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -314,10 +319,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer2 */
@@ -351,10 +356,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer3 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer4 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer5 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
@@ -500,10 +505,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer7 */
@@ -537,10 +542,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer8 */
@@ -574,10 +579,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer9 */
@@ -611,10 +616,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer10 */
@@ -648,10 +653,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer11 */
@@ -685,10 +690,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer12 */
@@ -722,10 +727,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* l4_wkup -> wd_timer2 */
@@ -766,7 +771,6 @@
},
.slaves = omap2420_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART1 */
@@ -792,7 +796,6 @@
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
@@ -818,7 +821,6 @@
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
@@ -844,7 +846,6 @@
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dss */
@@ -898,7 +899,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -938,7 +938,6 @@
},
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -975,7 +974,6 @@
},
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1013,7 +1011,6 @@
},
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1064,7 +1061,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1092,7 +1088,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1197,7 +1192,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio2 */
@@ -1223,7 +1217,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio3 */
@@ -1249,7 +1242,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio4 */
@@ -1275,7 +1267,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dma attributes */
@@ -1322,7 +1313,6 @@
.masters = omap2420_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1363,7 +1353,6 @@
},
.slaves = omap2420_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi1 */
@@ -1393,7 +1382,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi2 */
@@ -1423,7 +1411,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -1473,7 +1460,6 @@
},
.slaves = omap2420_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcbsp2 */
@@ -1514,7 +1500,6 @@
},
.slaves = omap2420_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 408193d..a2580d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -110,7 +110,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
.slaves = omap2430_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -250,7 +249,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -301,7 +299,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -317,7 +314,6 @@
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -345,7 +341,16 @@
.class = &iva_hwmod_class,
.masters = omap2430_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer2 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer3 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer4 */
@@ -499,10 +504,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer5 */
@@ -536,10 +541,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer6 */
@@ -573,10 +578,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer7 */
@@ -610,10 +615,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer8 */
@@ -647,10 +652,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer9 */
@@ -684,10 +689,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer10 */
@@ -721,10 +726,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer11 */
@@ -758,10 +763,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer12 */
@@ -795,10 +800,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* l4_wkup -> wd_timer2 */
@@ -839,7 +844,6 @@
},
.slaves = omap2430_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART1 */
@@ -865,7 +869,6 @@
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
@@ -891,7 +894,6 @@
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
@@ -917,7 +919,6 @@
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dss */
@@ -965,7 +966,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -999,7 +999,6 @@
},
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1030,7 +1029,6 @@
},
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1062,7 +1060,6 @@
},
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1123,7 +1120,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
@@ -1151,7 +1147,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* l4_wkup -> gpio1 */
@@ -1273,7 +1268,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio2 */
@@ -1299,7 +1293,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio3 */
@@ -1325,7 +1318,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio4 */
@@ -1351,7 +1343,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio5 */
@@ -1382,7 +1373,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dma attributes */
@@ -1429,7 +1419,6 @@
.masters = omap2430_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1469,7 +1458,6 @@
},
.slaves = omap2430_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi1 */
@@ -1499,7 +1487,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi2 */
@@ -1529,7 +1516,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi3 */
@@ -1572,7 +1558,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -1628,7 +1613,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/*
@@ -1689,7 +1673,6 @@
},
.slaves = omap2430_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp2 */
@@ -1731,7 +1714,6 @@
},
.slaves = omap2430_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp3 */
@@ -1783,7 +1765,6 @@
},
.slaves = omap2430_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp4 */
@@ -1841,7 +1822,6 @@
},
.slaves = omap2430_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp5 */
@@ -1899,7 +1879,6 @@
},
.slaves = omap2430_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO common */
@@ -1966,7 +1945,6 @@
.slaves = omap2430_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO2 */
@@ -2010,7 +1988,6 @@
.slaves = omap2430_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..3008e16 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -156,7 +156,6 @@
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
.slaves = omap3xxx_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -459,7 +458,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -474,7 +472,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -489,7 +486,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -505,7 +501,6 @@
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -533,7 +528,6 @@
.class = &iva_hwmod_class,
.masters = omap3xxx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer class */
@@ -570,6 +564,21 @@
.rev = OMAP_TIMER_IP_VERSION_1,
};
+/* secure timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
+ .timer_capability = OMAP_TIMER_SECURE,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod;
@@ -610,10 +619,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer2 */
@@ -656,10 +665,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer3 */
@@ -702,10 +711,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer4 */
@@ -748,10 +757,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer5 */
@@ -794,10 +803,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer6 */
@@ -840,10 +849,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer7 */
@@ -886,10 +895,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer8 */
@@ -932,10 +941,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer9 */
@@ -978,10 +987,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer10 */
@@ -1015,10 +1024,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer11 */
@@ -1052,10 +1061,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer12*/
@@ -1102,10 +1111,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_secure_dev_attr,
.slaves = omap3xxx_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* l4_wkup -> wd_timer2 */
@@ -1182,7 +1191,6 @@
},
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1213,7 +1221,6 @@
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
@@ -1239,7 +1246,6 @@
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
@@ -1265,7 +1271,6 @@
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
@@ -1302,7 +1307,6 @@
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
@@ -1390,7 +1394,6 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1415,8 +1418,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 |
- CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1),
};
/* l4_core -> dss_dispc */
@@ -1454,9 +1455,6 @@
},
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1518,9 +1516,6 @@
},
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1558,9 +1553,6 @@
},
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1599,9 +1591,6 @@
},
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1637,7 +1626,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
@@ -1672,7 +1660,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
@@ -1718,7 +1705,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4_wkup -> gpio1 */
@@ -1880,7 +1866,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio2 */
@@ -1912,7 +1897,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio3 */
@@ -1944,7 +1928,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio4 */
@@ -1976,7 +1959,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio5 */
@@ -2013,7 +1995,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio6 */
@@ -2050,7 +2031,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* dma_system -> L3 */
@@ -2134,7 +2114,6 @@
.masters = omap3xxx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -2207,7 +2186,6 @@
},
.slaves = omap3xxx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp2 */
@@ -2264,7 +2242,6 @@
.slaves = omap3xxx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3 */
@@ -2321,7 +2298,6 @@
.slaves = omap3xxx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp4 */
@@ -2379,7 +2355,6 @@
},
.slaves = omap3xxx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp5 */
@@ -2437,7 +2412,6 @@
},
.slaves = omap3xxx_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* 'mcbsp sidetone' class */
@@ -2498,7 +2472,6 @@
},
.slaves = omap3xxx_mcbsp2_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3_sidetone */
@@ -2547,7 +2520,6 @@
},
.slaves = omap3xxx_mcbsp3_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -2597,7 +2569,7 @@
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2609,9 +2581,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2619,7 +2588,7 @@
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2631,7 +2600,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/* SR2 */
@@ -2655,9 +2623,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2677,7 +2642,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/*
@@ -2745,7 +2709,6 @@
},
.slaves = omap3xxx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4 core -> mcspi1 interface */
@@ -2843,7 +2806,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi2 */
@@ -2873,7 +2835,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi3 */
@@ -2916,7 +2877,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* SPI4 */
@@ -2957,7 +2917,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi4_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -3014,7 +2973,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* usb_otg_hs */
@@ -3042,7 +3000,6 @@
.slaves = am35xx_usbhsotg_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
.class = &am35xx_usbotg_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1)
};
/* MMC/SD/SDIO common */
@@ -3108,7 +3065,6 @@
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO2 */
@@ -3151,7 +3107,6 @@
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO3 */
@@ -3193,7 +3148,6 @@
.slaves = omap3xxx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
@@ -3224,10 +3178,7 @@
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- &omap3xxx_uart4_hwmod,
/* dss class */
- &omap3430es1_dss_core_hwmod,
- &omap3xxx_dss_core_hwmod,
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
@@ -3239,9 +3190,6 @@
&omap3xxx_i2c3_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
-
/* gpio class */
&omap3xxx_gpio1_hwmod,
@@ -3272,16 +3220,96 @@
&omap34xx_mcspi3,
&omap34xx_mcspi4,
- /* usbotg class */
- &omap3xxx_usbhsotg_hwmod,
-
- /* usbotg for am35x */
- &am35xx_usbhsotg_hwmod,
-
NULL,
};
+/* 3430ES1-only hwmods */
+static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3430es1_dss_core_hwmod,
+ NULL
+};
+
+/* 3430ES2+-only hwmods */
+static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_dss_core_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+/* 34xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap34xx_sr1_hwmod,
+ &omap34xx_sr2_hwmod,
+ NULL
+};
+
+/* 36xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_uart4_hwmod,
+ &omap3xxx_dss_core_hwmod,
+ &omap36xx_sr1_hwmod,
+ &omap36xx_sr2_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+static __initdata struct omap_hwmod *am35xx_hwmods[] = {
+ &omap3xxx_dss_core_hwmod, /* XXX ??? */
+ &am35xx_usbhsotg_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
- return omap_hwmod_register(omap3xxx_hwmods);
+ int r;
+ struct omap_hwmod **h = NULL;
+ unsigned int rev;
+
+ /* Register hwmods common to all OMAP3 */
+ r = omap_hwmod_register(omap3xxx_hwmods);
+ if (!r)
+ return r;
+
+ rev = omap_rev();
+
+ /*
+ * Register hwmods common to individual OMAP3 families, all
+ * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
+ * All possible revisions should be included in this conditional.
+ */
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
+ rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
+ h = omap34xx_hwmods;
+ } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ h = am35xx_hwmods;
+ } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_2) {
+ h = omap36xx_hwmods;
+ } else {
+ WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
+ return -EINVAL;
+ };
+
+ r = omap_hwmod_register(h);
+ if (!r)
+ return r;
+
+ /*
+ * Register hwmods specific to certain ES levels of a
+ * particular family of silicon (e.g., 34xx ES1.0)
+ */
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0) {
+ h = omap3430es1_hwmods;
+ } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430es2plus_hwmods;
+ };
+
+ if (h)
+ r = omap_hwmod_register(h);
+
+ return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422..393afac 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -29,6 +29,7 @@
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
+#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
@@ -133,7 +134,6 @@
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -189,7 +189,6 @@
},
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -236,7 +235,6 @@
},
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_1 */
@@ -336,7 +334,6 @@
},
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_2 */
@@ -438,7 +435,6 @@
},
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_3 */
@@ -496,7 +492,6 @@
},
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -559,7 +554,6 @@
},
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_cfg */
@@ -588,7 +582,6 @@
},
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per */
@@ -617,7 +610,6 @@
},
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_wkup */
@@ -646,7 +638,6 @@
},
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -677,7 +668,6 @@
.clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -828,7 +818,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
.masters = omap44xx_aess_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -856,7 +845,6 @@
},
.opt_clks = bandgap_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -917,7 +905,6 @@
},
.slaves = omap44xx_counter_32k_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1005,7 +992,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
.masters = omap44xx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1098,7 +1084,6 @@
},
.slaves = omap44xx_dmic_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1164,7 +1149,6 @@
.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1187,7 +1171,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
.masters = omap44xx_dsp_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1278,7 +1261,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
.masters = omap44xx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1381,7 +1363,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1480,7 +1461,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* dss_dsi2 */
@@ -1558,7 +1538,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1656,7 +1635,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1748,7 +1726,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1817,7 +1794,6 @@
},
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1901,7 +1877,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio2 */
@@ -1957,7 +1932,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio3 */
@@ -2013,7 +1987,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio4 */
@@ -2069,7 +2042,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio5 */
@@ -2125,7 +2097,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio6 */
@@ -2181,7 +2152,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2261,7 +2231,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
.masters = omap44xx_hsi_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2345,7 +2314,6 @@
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c2 */
@@ -2402,7 +2370,6 @@
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c3 */
@@ -2459,7 +2426,6 @@
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c4 */
@@ -2516,7 +2482,6 @@
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2577,7 +2542,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2593,7 +2557,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2616,7 +2579,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
.masters = omap44xx_ipu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2706,7 +2668,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
.masters = omap44xx_iss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2781,7 +2742,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2797,7 +2757,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2820,7 +2779,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
.masters = omap44xx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2890,7 +2848,6 @@
},
.slaves = omap44xx_kbd_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2956,7 +2913,6 @@
},
.slaves = omap44xx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3051,7 +3007,6 @@
},
.slaves = omap44xx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp2 */
@@ -3127,7 +3082,6 @@
},
.slaves = omap44xx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp3 */
@@ -3203,7 +3157,6 @@
},
.slaves = omap44xx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp4 */
@@ -3258,7 +3211,6 @@
},
.slaves = omap44xx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3353,7 +3305,6 @@
},
.slaves = omap44xx_mcpdm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3442,7 +3393,6 @@
.dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi2 */
@@ -3505,7 +3455,6 @@
.dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi3 */
@@ -3568,7 +3517,6 @@
.dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi4 */
@@ -3629,7 +3577,6 @@
.dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3718,7 +3665,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
.masters = omap44xx_mmc1_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc2 */
@@ -3779,7 +3725,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
.masters = omap44xx_mmc2_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc3 */
@@ -3834,7 +3779,6 @@
},
.slaves = omap44xx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc4 */
@@ -3890,7 +3834,6 @@
},
.slaves = omap44xx_mmc4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc5 */
@@ -3945,7 +3888,6 @@
},
.slaves = omap44xx_mmc5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3987,7 +3929,6 @@
},
.masters = omap44xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4063,7 +4004,6 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_iva */
@@ -4112,7 +4052,6 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_mpu */
@@ -4161,7 +4100,6 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4224,7 +4162,6 @@
},
.slaves = omap44xx_spinlock_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4265,6 +4202,16 @@
.sysc = &omap44xx_timer_sysc,
};
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
@@ -4308,9 +4255,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer2 */
@@ -4356,9 +4303,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer3 */
@@ -4404,9 +4351,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer4 */
@@ -4452,9 +4399,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer5 */
@@ -4519,9 +4466,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer6 */
@@ -4587,9 +4534,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer7 */
@@ -4654,9 +4601,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer8 */
@@ -4721,9 +4668,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer9 */
@@ -4769,9 +4716,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer10 */
@@ -4817,9 +4764,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer11 */
@@ -4865,9 +4812,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4944,7 +4891,6 @@
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
@@ -4999,7 +4945,6 @@
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
@@ -5055,7 +5000,6 @@
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
@@ -5110,7 +5054,6 @@
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5195,7 +5138,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
.masters = omap44xx_usb_otg_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5266,7 +5208,6 @@
},
.slaves = omap44xx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* wd_timer3 */
@@ -5333,7 +5274,6 @@
},
.slaves = omap44xx_wd_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f190..c8b1bef 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -1,25 +1,25 @@
/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
@@ -55,12 +55,12 @@
static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
{
- struct omap4_l3 *l3 = _l3;
- int inttype, i, j;
+ struct omap4_l3 *l3 = _l3;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main_addr, std_err_main, err_reg;
- u32 base, slave_addr, clear;
- char *source_name;
+ u32 std_err_main, err_reg, clear, masterid;
+ void __iomem *base, *l3_targ_base;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@
* Read the regerr register of the clock domain
* to determine the source
*/
- base = (u32)l3->l3_base[i];
- err_reg = readl(base + l3_flagmux[i] + (inttype << 3));
+ base = l3->l3_base[i];
+ err_reg = __raw_readl(base + l3_flagmux[i] +
+ + L3_FLAGMUX_REGERR0 + (inttype << 3));
/* Get the corresponding error and analyse */
if (err_reg) {
/* Identify the source from control status register */
- for (j = 0; !(err_reg & (1 << j)); j++)
- ;
+ err_src = __ffs(err_reg);
- err_src = j;
/* Read the stderrlog_main_source from clk domain */
- std_err_main_addr = base + *(l3_targ[i] + err_src);
- std_err_main = readl(std_err_main_addr);
+ l3_targ_base = base + *(l3_targ[i] + err_src);
+ std_err_main = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- slave_addr = std_err_main_addr +
- L3_SLAVE_ADDRESS_OFFSET;
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name, readl(slave_addr));
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
+ __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
case CUSTOM_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
- source_name);
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
default:
@@ -120,12 +127,11 @@
return IRQ_HANDLED;
}
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
- int irq;
+ static struct omap4_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
@@ -177,27 +183,25 @@
/*
* Setup interrupt Handlers
*/
- irq = platform_get_irq(pdev, 0);
- ret = request_irq(irq,
+ l3->debug_irq = platform_get_irq(pdev, 0);
+ ret = request_irq(l3->debug_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ OMAP44XX_IRQ_L3_DBG);
goto err3;
}
- l3->debug_irq = irq;
- irq = platform_get_irq(pdev, 1);
- ret = request_irq(irq,
+ l3->app_irq = platform_get_irq(pdev, 1);
+ ret = request_irq(l3->app_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ OMAP44XX_IRQ_L3_APP);
goto err4;
}
- l3->app_irq = irq;
return 0;
@@ -214,9 +218,9 @@
return ret;
}
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+ struct omap4_l3 *l3 = platform_get_drvdata(pdev);
free_irq(l3->app_irq, l3);
free_irq(l3->debug_irq, l3);
@@ -228,16 +232,29 @@
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "ti,omap4-l3-noc", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
- .remove = __exit_p(omap4_l3_remove),
+ .probe = omap4_l3_probe,
+ .remove = __devexit_p(omap4_l3_remove),
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .owner = THIS_MODULE,
+ .of_match_table = l3_noc_match,
},
};
static int __init omap4_l3_init(void)
{
- return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+ return platform_driver_register(&omap4_l3_driver);
}
postcore_initcall_sync(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 359b833..90b5098 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -1,132 +1,162 @@
- /*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP4XXX L3 Interconnect error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-/*
- * L3 register offsets
- */
#define L3_MODULES 3
#define CLEAR_STDERR_LOG (1 << 31)
#define CUSTOM_ERROR 0x2
#define STANDARD_ERROR 0x0
#define INBAND_ERROR 0x0
-#define EMIF_KERRLOG_OFFSET 0x10
-#define L3_SLAVE_ADDRESS_OFFSET 0x14
-#define LOGICAL_ADDR_ERRORLOG 0x4
#define L3_APPLICATION_ERROR 0x0
#define L3_DEBUG_ERROR 0x1
-u32 l3_flagmux[L3_MODULES] = {
- 0x50C,
- 0x100C,
- 0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN 0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
+#define L3_FLAGMUX_REGERR0 0xc
+
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+ 0x500,
+ 0x1000,
+ 0X0200
};
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
- 0x148, /* DMM1 */
- 0x248, /* DMM2 */
- 0x348, /* ABE */
- 0x448, /* L4CFG */
- 0x648 /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+ 0x100, /* DMM1 */
+ 0x200, /* DMM2 */
+ 0x300, /* ABE */
+ 0x400, /* L4CFG */
+ 0x600 /* CLK2 PWR DISC */
};
-u32 l3_targ_stderrlog_main_clk2[] = {
- 0x548, /* CORTEX M3 */
- 0x348, /* DSS */
- 0x148, /* GPMC */
- 0x448, /* ISS */
- 0x748, /* IVAHD */
- 0xD48, /* missing in TRM corresponds to AES1*/
- 0x948, /* L4 PER0*/
- 0x248, /* OCMRAM */
- 0x148, /* missing in TRM corresponds to GPMC sERROR*/
- 0x648, /* SGX */
- 0x848, /* SL2 */
- 0x1648, /* C2C */
- 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF48, /* missing in TRM corrsponds to SHA1*/
- 0xE48, /* missing in TRM corresponds to AES2*/
- 0xC48, /* L4 PER3 */
- 0xA48, /* L4 PER1*/
- 0xB48 /* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+ 0x500, /* CORTEX M3 */
+ 0x300, /* DSS */
+ 0x100, /* GPMC */
+ 0x400, /* ISS */
+ 0x700, /* IVAHD */
+ 0xD00, /* missing in TRM corresponds to AES1*/
+ 0x900, /* L4 PER0*/
+ 0x200, /* OCMRAM */
+ 0x100, /* missing in TRM corresponds to GPMC sERROR*/
+ 0x600, /* SGX */
+ 0x800, /* SL2 */
+ 0x1600, /* C2C */
+ 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
+ 0xF00, /* missing in TRM corrsponds to SHA1*/
+ 0xE00, /* missing in TRM corresponds to AES2*/
+ 0xC00, /* L4 PER3 */
+ 0xA00, /* L4 PER1*/
+ 0xB00 /* L4 PER2*/
};
-u32 l3_targ_stderrlog_main_clk3[] = {
- 0x0148 /* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+ 0x0100 /* EMUSS */
};
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
{
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
+ "DMM1",
+ "DMM2",
+ "ABE",
+ "L4CFG",
+ "CLK2 PWR DISC",
},
{
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
+ "CORTEX M3" ,
+ "DSS ",
+ "GPMC ",
+ "ISS ",
+ "IVAHD ",
+ "AES1",
+ "L4 PER0",
+ "OCMRAM ",
+ "GPMC sERROR",
+ "SGX ",
+ "SL2 ",
+ "C2C ",
+ "PWR DISC CLK1",
+ "SHA1",
+ "AES2",
+ "L4 PER3",
+ "L4 PER1",
+ "L4 PER2",
},
{
- "EMUSS",
+ "EMUSS",
},
};
-u32 *l3_targ[L3_MODULES] = {
- l3_targ_stderrlog_main_clk1,
- l3_targ_stderrlog_main_clk2,
- l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+ l3_targ_inst_clk1,
+ l3_targ_inst_clk2,
+ l3_targ_inst_clk3,
};
struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base */
- void __iomem *l3_base[4];
+ void __iomem *l3_base[L3_MODULES];
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
};
-
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 873c0e3..a05a62f 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -135,7 +135,7 @@
}
}
-/**
+/*
* omap3_l3_block_irq - handles a register block's irq
* @l3: struct omap3_l3 *
* @base: register block base address
@@ -150,30 +150,29 @@
static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u64 error, int error_addr)
{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
+ u8 code = omap3_l3_decode_error_code(error);
+ u8 initid = omap3_l3_decode_initid(error);
+ u8 multi = error & L3_ERROR_LOG_MULTI;
+ u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "",
- address);
+ omap3_l3_code_string(code),
+ omap3_l3_initiator_string(initid),
+ multi ? "Multiple Errors" : "", address);
return IRQ_HANDLED;
}
static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
+ struct omap3_l3 *l3 = _l3;
+ u64 status, clear;
+ u64 error;
+ u64 error_addr;
+ u64 err_source = 0;
+ void __iomem *base;
+ int int_type;
+ irqreturn_t ret = IRQ_NONE;
int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
if (!int_type) {
@@ -191,14 +190,12 @@
}
/* identify the error source */
- for (err_source = 0; !(status & (1 << err_source)); err_source++)
- ;
+ err_source = __ffs(status);
- base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+ base = l3->rt + omap3_l3_bases[int_type][err_source];
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
ret |= omap3_l3_block_irq(l3, error, error_addr);
}
@@ -215,9 +212,9 @@
static int __init omap3_l3_probe(struct platform_device *pdev)
{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
+ struct omap3_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
index ba2ed9a..4f3cebc 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/arch/arm/mach-omap2/omap_l3_smx.h
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
@@ -40,7 +40,7 @@
#define L3_SI_CONTROL 0x020
#define L3_SI_FLAG_STATUS_0 0x510
-const u64 shift = 1;
+static const u64 shift = 1;
#define L3_STATUS_0_MPUIA_BRST (shift << 0)
#define L3_STATUS_0_MPUIA_RSP (shift << 1)
@@ -78,32 +78,32 @@
#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
+#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
+ | L3_STATUS_0_MPUIA_RSP \
+ | L3_STATUS_0_IVAIA_BRST \
+ | L3_STATUS_0_IVAIA_RSP \
+ | L3_STATUS_0_SGXIA_BRST \
+ | L3_STATUS_0_SGXIA_RSP \
+ | L3_STATUS_0_CAMIA_BRST \
+ | L3_STATUS_0_CAMIA_RSP \
+ | L3_STATUS_0_DISPIA_BRST \
+ | L3_STATUS_0_DISPIA_RSP \
+ | L3_STATUS_0_DMARDIA_BRST \
+ | L3_STATUS_0_DMARDIA_RSP \
+ | L3_STATUS_0_DMAWRIA_BRST \
+ | L3_STATUS_0_DMAWRIA_RSP \
+ | L3_STATUS_0_USBOTGIA_BRST \
+ | L3_STATUS_0_USBOTGIA_RSP \
+ | L3_STATUS_0_USBHOSTIA_BRST \
+ | L3_STATUS_0_SMSTA_REQ \
+ | L3_STATUS_0_GPMCTA_REQ \
+ | L3_STATUS_0_OCMRAMTA_REQ \
+ | L3_STATUS_0_OCMROMTA_REQ \
+ | L3_STATUS_0_IVATA_REQ \
+ | L3_STATUS_0_SGXTA_REQ \
+ | L3_STATUS_0_L4CORETA_REQ \
+ | L3_STATUS_0_L4PERTA_REQ \
+ | L3_STATUS_0_L4EMUTA_REQ \
| L3_STATUS_0_MAD2DTA_REQ)
#define L3_SI_FLAG_STATUS_1 0x530
@@ -137,19 +137,19 @@
enum omap3_l3_initiator_id {
/* LCD has 1 ID */
- OMAP_L3_LCD = 29,
+ OMAP_L3_LCD = 29,
/* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
+ OMAP_L3_SAD2D = 28,
/* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
+ OMAP_L3_IA_MPU_SS_1 = 27,
+ OMAP_L3_IA_MPU_SS_2 = 26,
+ OMAP_L3_IA_MPU_SS_3 = 25,
+ OMAP_L3_IA_MPU_SS_4 = 24,
+ OMAP_L3_IA_MPU_SS_5 = 23,
/* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
+ OMAP_L3_IA_IVA_SS_1 = 22,
+ OMAP_L3_IA_IVA_SS_2 = 21,
+ OMAP_L3_IA_IVA_SS_3 = 20,
/* IVA 2.2 SS DMA has 6 IDS */
OMAP_L3_IA_IVA_SS_DMA_1 = 19,
OMAP_L3_IA_IVA_SS_DMA_2 = 18,
@@ -158,25 +158,25 @@
OMAP_L3_IA_IVA_SS_DMA_5 = 15,
OMAP_L3_IA_IVA_SS_DMA_6 = 14,
/* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
+ OMAP_L3_IA_SGX = 13,
/* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
+ OMAP_L3_IA_CAM_1 = 12,
+ OMAP_L3_IA_CAM_2 = 11,
+ OMAP_L3_IA_CAM_3 = 10,
/* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
+ OMAP_L3_IA_DAP = 9,
/* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
+ OMAP_L3_SDMA_WR_1 = 8,
+ OMAP_L3_SDMA_WR_2 = 7,
/* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
+ OMAP_L3_SDMA_RD_1 = 6,
+ OMAP_L3_SDMA_RD_2 = 5,
+ OMAP_L3_SDMA_RD_3 = 4,
+ OMAP_L3_SDMA_RD_4 = 3,
/* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
+ OMAP_L3_USBOTG = 2,
/* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
+ OMAP_L3_USBHOST = 1,
};
enum omap3_l3_code {
@@ -192,21 +192,21 @@
};
struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base*/
- void __iomem *rt;
+ void __iomem *rt;
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
/* true when and inband functional error occurs */
- unsigned inband:1;
+ unsigned inband:1;
};
/* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
/* MPU IA */
0x1400,
0x1400,
@@ -305,7 +305,7 @@
0,
};
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
/* MPU DATA IA */
0x1400,
/* RESERVED */
@@ -321,7 +321,7 @@
/* REST RESERVED */
};
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
omap3_l3_app_bases,
omap3_l3_debug_bases,
};
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 07d6140..f515a1a 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -42,8 +42,11 @@
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
+#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
+#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
+#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
@@ -95,6 +98,8 @@
is_offset_valid = true;
}
+ if (!vsel)
+ return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -106,9 +111,9 @@
return 1350000;
if (smps_offset & 0x8)
- return ((((vsel - 1) * 125) + 7000)) * 100;
+ return ((((vsel - 1) * 1266) + 70900)) * 10;
else
- return ((((vsel - 1) * 125) + 6000)) * 100;
+ return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
@@ -127,6 +132,8 @@
is_offset_valid = true;
}
+ if (!uv)
+ return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -134,16 +141,21 @@
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
- if (uv == 1350000)
+ if (uv > twl6030_vsel_to_uv(0x39)) {
+ if (uv == 1350000)
+ return 0x3A;
+ pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
+ __func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
+ }
if (smps_offset & 0x8)
- return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
- return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
-static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -158,12 +170,13 @@
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap3_core_volt_info = {
+static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -178,18 +191,19 @@
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1350000,
- .onlp_volt = 1350000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1375000,
+ .onlp_volt = 1375000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -198,18 +212,20 @@
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_iva_volt_info = {
+static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1188000,
+ .onlp_volt = 1188000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -218,18 +234,20 @@
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_core_volt_info = {
+static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1200000,
+ .onlp_volt = 1200000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -238,7 +256,8 @@
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@@ -250,14 +269,14 @@
if (!cpu_is_omap44xx())
return -ENODEV;
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu");
+ omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("iva");
- omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+ voltdm = voltdm_lookup("iva");
+ omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
@@ -270,10 +289,10 @@
return -ENODEV;
if (cpu_is_omap3630()) {
- omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
- omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
- omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
- omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+ omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+ omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+ omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+ omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
@@ -288,11 +307,11 @@
if (!twl_sr_enable_autoinit)
omap3_twl_set_sr_bit(true);
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu_iva");
+ omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index ab8b35b..9262a6b 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -69,7 +69,7 @@
opp_def->hwmod_name, i);
return -EINVAL;
}
- dev = &oh->od->pdev.dev;
+ dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 472bf22..2ab7a9e 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,54 +26,21 @@
static struct omap_device_pm_latency *pm_lats;
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
- WARN_ON_ONCE(!mpu_dev);
- return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
- WARN_ON_ONCE(!iva_dev);
- return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
- WARN_ON_ONCE(!l3_dev);
- return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
- od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
- if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+ pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+ if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
- *new_dev = &od->pdev.dev;
-
return 0;
}
@@ -82,16 +49,16 @@
*/
static void omap2_init_processor_devices(void)
{
- _init_omap_device("mpu", &mpu_dev);
+ _init_omap_device("mpu");
if (omap3_has_iva())
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("iva");
if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1", &l3_dev);
- _init_omap_device("dsp", &dsp_dev);
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("l3_main_1");
+ _init_omap_device("dsp");
+ _init_omap_device("iva");
} else {
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("l3_main");
}
}
@@ -136,8 +103,8 @@
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
+ pr_err("%s: unable to set state of powerdomain: %s\n",
+ __func__, pwrdm->name);
goto err;
}
@@ -161,37 +128,44 @@
}
/*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- struct device *dev)
+ const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
+ struct device *dev;
- if (!vdd_name || !clk_name || !dev) {
- printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ if (!vdd_name || !clk_name || !oh_name) {
+ pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
- voltdm = omap_voltage_domain_lookup(vdd_name);
+ dev = omap_device_get_by_hwmod_name(oh_name);
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
+ voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
- printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
- printk(KERN_ERR "%s: unable to get clk %s\n",
- __func__, clk_name);
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
@@ -200,24 +174,23 @@
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
- printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
- printk(KERN_ERR "%s: unable to find voltage corresponding"
+ pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
- omap_voltage_scale_vdd(voltdm, bootup_volt);
+ voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
- printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
- __func__, vdd_name);
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
@@ -226,8 +199,8 @@
if (!cpu_is_omap34xx())
return;
- omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
@@ -235,14 +208,15 @@
if (!cpu_is_omap44xx())
return;
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
- omap2_init_processor_devices();
+ if (!of_have_populated_dt())
+ omap2_init_processor_devices();
omap_pm_if_init();
return 0;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..cf0c216 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,8 +53,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
-static int omap2_pm_debug;
-
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
@@ -96,7 +94,6 @@
static void omap2_enter_full_retention(void)
{
u32 l;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* There is 1 reference hold for all children of the oscillator
* clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@
omap2_gpio_prepare_for_idle(0);
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -155,13 +148,6 @@
console_unlock();
no_sleep:
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
@@ -219,7 +205,6 @@
static void omap2_enter_mpu_retention(void)
{
int only_idle = 0;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@
only_idle = 1;
}
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
omap2_sram_idle();
-
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
}
static int omap2_can_sleep(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..c8cbd00 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -55,7 +55,7 @@
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
- return (suspend_state != PM_SUSPEND_ON);
+ return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index 171fccd..f97afff 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -1,9 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/powerdomain-common.c
- * Contains common powerdomain framework functions
+ * Common powerdomain framework functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ef71fdd..5164d58 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1,7 +1,7 @@
/*
* OMAP powerdomain control
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Written by Paul Walmsley
@@ -77,13 +77,11 @@
static int _pwrdm_register(struct powerdomain *pwrdm)
{
int i;
+ struct voltagedomain *voltdm;
if (!pwrdm || !pwrdm->name)
return -EINVAL;
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
if (cpu_is_omap44xx() &&
pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
@@ -94,6 +92,16 @@
if (_pwrdm_lookup(pwrdm->name))
return -EEXIST;
+ voltdm = voltdm_lookup(pwrdm->voltdm.name);
+ if (!voltdm) {
+ pr_err("powerdomain: %s: voltagedomain %s does not exist\n",
+ pwrdm->name, pwrdm->voltdm.name);
+ return -EINVAL;
+ }
+ pwrdm->voltdm.ptr = voltdm;
+ INIT_LIST_HEAD(&pwrdm->voltdm_node);
+ voltdm_add_pwrdm(voltdm, pwrdm);
+
list_add(&pwrdm->node, &pwrdm_list);
/* Initialize the powerdomain's state counter */
@@ -194,36 +202,76 @@
/* Public functions */
/**
- * pwrdm_init - set up the powerdomain layer
- * @pwrdms: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specific implementations
+ * pwrdm_register_platform_funcs - register powerdomain implementation fns
+ * @po: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdms, registering all
- * that are available on the current CPU. Also, program all
- * powerdomain target state as ON; this is to prevent domains from
- * hitting low power states (if bootloader has target states set to
- * something other than ON) and potentially even losing context while
- * PM is not fully initialized. The PM late init code can then program
- * the desired target state for all the power domains. No return
- * value.
+ * Register the list of function pointers used to implement the
+ * powerdomain functions on different OMAP SoCs. Should be called
+ * before any other pwrdm_register*() function. Returns -EINVAL if
+ * @po is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
+int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
+{
+ if (!po)
+ return -EINVAL;
+
+ if (arch_pwrdm)
+ return -EEXIST;
+
+ arch_pwrdm = po;
+
+ return 0;
+}
+
+/**
+ * pwrdm_register_pwrdms - register SoC powerdomains
+ * @ps: pointer to an array of struct powerdomain to register
+ *
+ * Register the powerdomains available on a particular OMAP SoC. Must
+ * be called after pwrdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
+ * null; or 0 upon success.
+ */
+int pwrdm_register_pwrdms(struct powerdomain **ps)
{
struct powerdomain **p = NULL;
+
+ if (!arch_pwrdm)
+ return -EEXIST;
+
+ if (!ps)
+ return -EINVAL;
+
+ for (p = ps; *p; p++)
+ _pwrdm_register(*p);
+
+ return 0;
+}
+
+/**
+ * pwrdm_complete_init - set up the powerdomain layer
+ *
+ * Do whatever is necessary to initialize registered powerdomains and
+ * powerdomain code. Currently, this programs the next power state
+ * for each powerdomain to ON. This prevents powerdomains from
+ * unexpectedly losing context or entering high wakeup latency modes
+ * with non-power-management-enabled kernels. Must be called after
+ * pwrdm_register_pwrdms(). Returns -EACCES if called before
+ * pwrdm_register_pwrdms(), or 0 upon success.
+ */
+int pwrdm_complete_init(void)
+{
struct powerdomain *temp_p;
- if (!custom_funcs)
- WARN(1, "powerdomain: No custom pwrdm functions registered\n");
- else
- arch_pwrdm = custom_funcs;
-
- if (pwrdms) {
- for (p = pwrdms; *p; p++)
- _pwrdm_register(*p);
- }
+ if (list_empty(&pwrdm_list))
+ return -EACCES;
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
+
+ return 0;
}
/**
@@ -390,6 +438,18 @@
}
/**
+ * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in
+ * @pwrdm: struct powerdomain *
+ *
+ * Return a pointer to the struct voltageomain that the specified powerdomain
+ * @pwrdm exists in.
+ */
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm)
+{
+ return pwrdm->voltdm.ptr;
+}
+
+/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..42e6dd8 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -24,6 +24,8 @@
#include <plat/cpu.h>
+#include "voltage.h"
+
/* Powerdomain basic power states */
#define PWRDM_POWER_OFF 0x0
#define PWRDM_POWER_RET 0x1
@@ -78,7 +80,7 @@
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @voltdm: voltagedomain containing this powerdomain
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
* @pwrsts: Possible powerdomain power states
@@ -89,6 +91,7 @@
* @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
+ * @voltdm_node: list_head linking all powerdomains in a voltagedomain
* @state:
* @state_counter:
* @timer:
@@ -98,7 +101,10 @@
*/
struct powerdomain {
const char *name;
- const struct omap_chip_id omap_chip;
+ union {
+ const char *name;
+ struct voltagedomain *ptr;
+ } voltdm;
const s16 prcm_offs;
const u8 pwrsts;
const u8 pwrsts_logic_ret;
@@ -109,6 +115,7 @@
const u8 prcm_partition;
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
struct list_head node;
+ struct list_head voltdm_node;
int state;
unsigned state_counter[PWRDM_MAX_PWRSTS];
unsigned ret_logic_off_counter;
@@ -162,7 +169,9 @@
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
};
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
struct powerdomain *pwrdm_lookup(const char *name);
@@ -176,6 +185,7 @@
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
@@ -210,7 +220,8 @@
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-extern void omap2xxx_powerdomains_init(void);
+extern void omap242x_powerdomains_init(void);
+extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index cf600e2..6a17e4c 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -1,7 +1,7 @@
/*
* OMAP2 and OMAP3 powerdomain control
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..d3a5399 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -12,20 +12,6 @@
*/
/*
- * To Do List
- * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
- * Clock Domain Framework
- */
-
-/*
- * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34xx chips.
- *
- * This is not an exhaustive listing of powerdomains on the chips; only
- * powerdomains that can be controlled in software.
- */
-
-/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
@@ -59,8 +45,6 @@
struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -70,11 +54,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
+ .voltdm = { .name = "wakeup" },
};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index cc389fb..2385c1f 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2XXX powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -28,7 +28,6 @@
static struct powerdomain dsp_pwrdm = {
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -38,12 +37,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain mpu_24xx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -53,12 +52,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_24xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.banks = 3,
.pwrsts_mem_ret = {
@@ -71,6 +70,7 @@
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
},
+ .voltdm = { .name = "core" },
};
@@ -78,14 +78,11 @@
* 2430-specific powerdomains
*/
-#ifdef CONFIG_SOC_OMAP2430
-
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -95,29 +92,44 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
-#endif /* CONFIG_SOC_OMAP2430 */
+/*
+ *
+ */
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap24xx[] __initdata = {
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
-
-#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mdm_pwrdm,
-#endif
NULL
};
-void __init omap2xxx_powerdomains_init(void)
+static struct powerdomain *powerdomains_omap2430[] __initdata = {
+ &mdm_pwrdm,
+ NULL
+};
+
+void __init omap242x_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+ if (!cpu_is_omap2420())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_complete_init();
+}
+
+void __init omap243x_powerdomains_init(void)
+{
+ if (!cpu_is_omap2430())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_register_pwrdms(powerdomains_omap2430);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..8ef26da 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <plat/cpu.h>
+
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
@@ -27,8 +29,6 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP3
-
/*
* Powerdomains
*/
@@ -36,7 +36,6 @@
static struct powerdomain iva2_pwrdm = {
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -52,12 +51,12 @@
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -68,6 +67,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
/*
@@ -83,10 +83,6 @@
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3630ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -98,13 +94,12 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
- CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/*
@@ -121,11 +116,11 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -136,6 +131,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
/*
@@ -146,7 +142,6 @@
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -157,11 +152,11 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -172,12 +167,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain per_pwrdm = {
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -187,26 +182,26 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain neon_pwrdm = {
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
/*
@@ -223,65 +218,103 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+ .voltdm = { .name = "core" },
};
/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
&wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
&iva2_pwrdm,
&mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_3xxx_pre_es3_1_pwrdm,
- &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
- &sgx_pwrdm,
- &usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
- &dpll5_pwrdm,
-#endif
NULL
};
+static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
+ &gfx_omap2_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.0 */
+static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
+ &core_3xxx_pre_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.1+ */
+static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
+ &core_3xxx_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
void __init omap3xxx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+ unsigned int rev;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ rev = omap_rev();
+
+ if (rev == OMAP3430_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
+ rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ else
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 247e794..704664c 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -33,9 +33,9 @@
/* core_44xx_pwrdm: CORE power domain */
static struct powerdomain core_44xx_pwrdm = {
.name = "core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CORE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 5,
@@ -59,9 +59,9 @@
/* gfx_44xx_pwrdm: 3D accelerator power domain */
static struct powerdomain gfx_44xx_pwrdm = {
.name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_GFX_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -76,9 +76,9 @@
/* abe_44xx_pwrdm: Audio back end power domain */
static struct powerdomain abe_44xx_pwrdm = {
.name = "abe_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_ABE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
@@ -96,9 +96,9 @@
/* dss_44xx_pwrdm: Display subsystem power domain */
static struct powerdomain dss_44xx_pwrdm = {
.name = "dss_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_DSS_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
@@ -114,9 +114,9 @@
/* tesla_44xx_pwrdm: Tesla processor power domain */
static struct powerdomain tesla_44xx_pwrdm = {
.name = "tesla_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_TESLA_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -136,9 +136,9 @@
/* wkup_44xx_pwrdm: Wake-up power domain */
static struct powerdomain wkup_44xx_pwrdm = {
.name = "wkup_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_WKUP_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -152,9 +152,9 @@
/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
static struct powerdomain cpu0_44xx_pwrdm = {
.name = "cpu0_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -169,9 +169,9 @@
/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
static struct powerdomain cpu1_44xx_pwrdm = {
.name = "cpu1_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -186,9 +186,9 @@
/* emu_44xx_pwrdm: Emulation power domain */
static struct powerdomain emu_44xx_pwrdm = {
.name = "emu_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_EMU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -202,9 +202,9 @@
/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
static struct powerdomain mpu_44xx_pwrdm = {
.name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -223,9 +223,9 @@
/* ivahd_44xx_pwrdm: IVA-HD power domain */
static struct powerdomain ivahd_44xx_pwrdm = {
.name = "ivahd_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_IVAHD_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
@@ -247,9 +247,9 @@
/* cam_44xx_pwrdm: Camera subsystem power domain */
static struct powerdomain cam_44xx_pwrdm = {
.name = "cam_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CAM_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -264,9 +264,9 @@
/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
static struct powerdomain l3init_44xx_pwrdm = {
.name = "l3init_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L3INIT_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -282,9 +282,9 @@
/* l4per_44xx_pwrdm: Target peripherals power domain */
static struct powerdomain l4per_44xx_pwrdm = {
.name = "l4per_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L4PER_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -305,18 +305,18 @@
*/
static struct powerdomain always_on_core_44xx_pwrdm = {
.name = "always_on_core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
};
/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
static struct powerdomain cefuse_44xx_pwrdm = {
.name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CEFUSE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
@@ -352,5 +352,7 @@
void __init omap44xx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+ pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap44xx);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 051213f..f02d87f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -20,6 +20,8 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
+
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@@ -156,3 +158,57 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index a1fc62a..cef533d 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -303,7 +303,19 @@
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#endif /* CONFIG_ARCH_OMAP4 */
+
#endif
/*
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 0016555..495a31a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -21,8 +21,11 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
/* PRM low-level functions */
@@ -50,3 +53,71 @@
return v;
}
+
+/* PRM VP */
+
+/*
+ * struct omap4_vp - OMAP4 VP register access description.
+ * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap4_vp {
+ u32 irqstatus_mpu;
+ u32 tranxdone_status;
+};
+
+static struct omap4_vp omap4_vp[] = {
+ [OMAP4_VP_VDD_MPU_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
+ .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_IVA_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_CORE_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
+ },
+};
+
+u32 omap4_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap4_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+
+ omap4_prminst_write_inst_reg(vp->tranxdone_status,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+};
+
+u32 omap4_prm_vcvp_read(u8 offset)
+{
+ return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+void omap4_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap4_prminst_rmw_inst_reg_bits(mask, bits,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ offset);
+}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7dfa379..3d66ccd 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -751,6 +751,18 @@
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+/* OMAP4-specific VP functions */
+u32 omap4_prm_vp_check_txdone(u8 vp_id);
+void omap4_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP4 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap4_prm_vcvp_read(u8 offset);
+extern void omap4_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 466fc722..9992dbf 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@
static LIST_HEAD(uart_list);
static u8 num_uarts;
-static int uart_idle_hwmod(struct omap_device *od)
-{
- omap_hwmod_idle(od->hwmods[0]);
-
- return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
- omap_hwmod_enable(od->hwmods[0]);
-
- return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
- {
- .deactivate_func = uart_idle_hwmod,
- .activate_func = uart_enable_hwmod,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -711,7 +689,7 @@
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
@@ -799,20 +777,19 @@
if (WARN_ON(!oh))
return;
- od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
- omap_uart_latency,
- ARRAY_SIZE(omap_uart_latency), false);
- WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ NULL, 0, false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
- uart->pdev = &od->pdev;
+ uart->pdev = pdev;
oh->dev_attr = uart;
@@ -846,8 +823,8 @@
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(&od->pdev.dev, true);
- DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
+ device_init_wakeup(&pdev->dev, true);
+ DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index f438cf4..53d9d0a 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -15,7 +15,7 @@
static int sr_class3_enable(struct voltagedomain *voltdm)
{
- unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+ unsigned long volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
@@ -32,7 +32,7 @@
omap_vp_disable(voltdm);
sr_disable(voltdm);
if (is_volt_reset)
- omap_voltage_reset(voltdm);
+ voltdm_reset(voltdm);
return 0;
}
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 34c01a7..bb606c9 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -62,6 +62,7 @@
static struct omap_sr_class_data *sr_class;
static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry *sr_dbg_dir;
static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
{
@@ -826,9 +827,10 @@
struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
- struct dentry *vdd_dbg_dir, *nvalue_dir;
+ struct dentry *nvalue_dir;
struct omap_volt_data *volt_data;
int i, ret = 0;
+ char *name;
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
@@ -899,18 +901,25 @@
}
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-
- /*
- * If the voltage domain debugfs directory is not created, do
- * not try to create rest of the debugfs entries.
- */
- vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir) {
- ret = -EINVAL;
- goto err_iounmap;
+ if (!sr_dbg_dir) {
+ sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+ if (!sr_dbg_dir) {
+ ret = PTR_ERR(sr_dbg_dir);
+ pr_err("%s:sr debugfs dir creation failed(%d)\n",
+ __func__, ret);
+ goto err_iounmap;
+ }
}
- sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+ name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
+ if (!name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+ sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
+ kfree(name);
if (IS_ERR(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 10d3c5e..9f43fcc 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
static bool sr_enable_on_init;
-static struct omap_device_pm_latency omap_sr_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
- },
-};
-
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
@@ -80,7 +72,7 @@
static int sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
@@ -102,7 +94,7 @@
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
- sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+ sr_data->voltdm = voltdm_lookup(oh->vdd_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
@@ -120,10 +112,9 @@
sr_data->enable_on_init = sr_enable_on_init;
- od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
- omap_sr_latency,
- ARRAY_SIZE(omap_sr_latency), 0);
- if (IS_ERR(od))
+ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ NULL, 0, 0);
+ if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cf1de7d..e49fc7b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
@@ -42,6 +43,10 @@
#include <asm/sched_clock.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
@@ -67,7 +72,7 @@
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
-u32 sys_timer_reserved;
+static u32 sys_timer_reserved;
/* Clockevent code */
@@ -78,7 +83,7 @@
{
struct clock_event_device *evt = &clockevent_gpt;
- __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
evt->event_handler(evt);
return IRQ_HANDLED;
@@ -93,7 +98,7 @@
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+ __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
0xffffffff - cycles, 1);
return 0;
@@ -104,16 +109,16 @@
{
u32 period;
- __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
+ __omap_dm_timer_stop(&clkev, 1, clkev.rate);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
period = clkev.rate / HZ;
period -= 1;
/* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
0xffffffff - period, 1);
- __omap_dm_timer_load_start(clkev.io_base,
+ __omap_dm_timer_load_start(&clkev,
OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
0xffffffff - period, 1);
break;
@@ -189,7 +194,8 @@
clk_put(src);
}
}
- __omap_dm_timer_reset(timer->io_base, 1, 1);
+ __omap_dm_timer_init_regs(timer);
+ __omap_dm_timer_reset(timer, 1, 1);
timer->posted = 1;
timer->rate = clk_get_rate(timer->fclk);
@@ -210,7 +216,7 @@
omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
- __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
clockevent_gpt.shift);
@@ -251,7 +257,7 @@
static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
- return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
}
static struct clocksource clocksource_gpt = {
@@ -266,7 +272,7 @@
{
u32 cyc;
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -276,7 +282,7 @@
u32 cyc = 0;
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -293,7 +299,7 @@
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
- __omap_dm_timer_load_start(clksrc.io_base,
+ __omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
@@ -341,3 +347,167 @@
}
OMAP_SYS_TIMER(4)
#endif
+
+/**
+ * omap2_dm_timer_set_src - change the timer input clock source
+ * @pdev: timer platform device pointer
+ * @source: array index of parent clock source
+ */
+static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
+{
+ int ret;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+ struct clk *fclk, *parent;
+ char *parent_name = NULL;
+
+ fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
+ parent_name = "alt_ck";
+ break;
+ }
+ dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
+ __func__, __LINE__);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ parent = clk_get(&pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
+ __func__, __LINE__, parent_name);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
+ __func__, parent_name);
+ ret = -EINVAL;
+ }
+
+ clk_put(parent);
+ clk_put(fclk);
+
+ return ret;
+}
+
+struct omap_device_pm_latency omap2_dmtimer_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+/**
+ * omap_timer_init - build and register timer device with an
+ * associated timer hwmod
+ * @oh: timer hwmod pointer to be used to build timer device
+ * @user: parameter that can be passed from calling hwmod API
+ *
+ * Called by omap_hwmod_for_each_by_class to register each of the timer
+ * devices present in the system. The number of timer devices is known
+ * by parsing through the hwmod database for a given class name. At the
+ * end of function call memory is allocated for timer device and it is
+ * registered to the framework ready to be proved by the driver.
+ */
+static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
+{
+ int id;
+ int ret = 0;
+ char *name = "omap_timer";
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+ struct omap_timer_capability_dev_attr *timer_dev_attr;
+ struct powerdomain *pwrdm;
+
+ pr_debug("%s: %s\n", __func__, oh->name);
+
+ /* on secure device, do not register secure timer */
+ timer_dev_attr = oh->dev_attr;
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
+ if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
+ return ret;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for [%s]\n", __func__, oh->name);
+ return -ENOMEM;
+ }
+
+ /*
+ * Extract the IDs from name field in hwmod database
+ * and use the same for constructing ids' for the
+ * timer devices. In a way, we are avoiding usage of
+ * static variable witin the function to do the same.
+ * CAUTION: We have to be careful and make sure the
+ * name in hwmod database does not change in which case
+ * we might either make corresponding change here or
+ * switch back static variable mechanism.
+ */
+ sscanf(oh->name, "timer%2d", &id);
+
+ pdata->set_timer_src = omap2_dm_timer_set_src;
+ pdata->timer_ip_version = oh->class->rev;
+
+ /* Mark clocksource and clockevent timers as reserved */
+ if ((sys_timer_reserved >> (id - 1)) & 0x1)
+ pdata->reserved = 1;
+
+ pwrdm = omap_hwmod_get_pwrdm(oh);
+ pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+#ifdef CONFIG_PM
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+#endif
+ pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+ omap2_dmtimer_latency,
+ ARRAY_SIZE(omap2_dmtimer_latency),
+ 0);
+
+ if (IS_ERR(pdev)) {
+ pr_err("%s: Can't build omap_device for %s: %s.\n",
+ __func__, name, oh->name);
+ ret = -EINVAL;
+ }
+
+ kfree(pdata);
+
+ return ret;
+}
+
+/**
+ * omap2_dm_timer_init - top level regular device initialization
+ *
+ * Uses dedicated hwmod api to parse through hwmod database for
+ * given class name and then build and register the timer device.
+ */
+static int __init omap2_dm_timer_init(void)
+{
+ int ret;
+
+ ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
+ if (unlikely(ret)) {
+ pr_err("%s: device registration failed.\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+arch_initcall(omap2_dm_timer_init);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a65145b..47fb5d6 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct omap_device_pm_latency omap_musb_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
{
switch (board_data->interface_type) {
@@ -115,7 +107,6 @@
void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
{
struct omap_hwmod *oh;
- struct omap_device *od;
struct platform_device *pdev;
struct device *dev;
int bus_id = -1;
@@ -137,9 +128,6 @@
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (cpu_is_omap44xx())
- omap4430_phy_init(dev);
-
if (cpu_is_omap3517() || cpu_is_omap3505()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
@@ -148,22 +136,19 @@
name = "musb-omap2430";
}
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
+ oh = omap_hwmod_lookup(oh_name);
+ if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+ __func__, oh_name))
+ return;
- od = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat), omap_musb_latency,
- ARRAY_SIZE(omap_musb_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(musb_plat), NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
- pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
new file mode 100644
index 0000000..031d116
--- /dev/null
+++ b/arch/arm/mach-omap2/vc.c
@@ -0,0 +1,367 @@
+/*
+ * OMAP Voltage Controller (VC) interface
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+
+#include "voltage.h"
+#include "vc.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+/**
+ * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
+ * @sa: bit for slave address
+ * @rav: bit for voltage configuration register
+ * @rac: bit for command configuration register
+ * @racen: enable bit for RAC
+ * @cmd: bit for command value set selection
+ *
+ * Channel configuration bits, common for OMAP3+
+ * OMAP3 register: PRM_VC_CH_CONF
+ * OMAP4 register: PRM_VC_CFG_CHANNEL
+ * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
+ */
+struct omap_vc_channel_cfg {
+ u8 sa;
+ u8 rav;
+ u8 rac;
+ u8 racen;
+ u8 cmd;
+};
+
+static struct omap_vc_channel_cfg vc_default_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(1),
+ .rac = BIT(2),
+ .racen = BIT(3),
+ .cmd = BIT(4),
+};
+
+/*
+ * On OMAP3+, all VC channels have the above default bitfield
+ * configuration, except the OMAP4 MPU channel. This appears
+ * to be a freak accident as every other VC channel has the
+ * default configuration, thus creating a mutant channel config.
+ */
+static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(2),
+ .rac = BIT(3),
+ .racen = BIT(4),
+ .cmd = BIT(1),
+};
+
+static struct omap_vc_channel_cfg *vc_cfg_bits;
+#define CFG_CHANNEL_MASK 0x1f
+
+/**
+ * omap_vc_config_channel - configure VC channel to PMIC mappings
+ * @voltdm: pointer to voltagdomain defining the desired VC channel
+ *
+ * Configures the VC channel to PMIC mappings for the following
+ * PMIC settings
+ * - i2c slave address (SA)
+ * - voltage configuration address (RAV)
+ * - command configuration address (RAC) and enable bit (RACEN)
+ * - command values for ON, ONLP, RET and OFF (CMD)
+ *
+ * This function currently only allows flexible configuration of the
+ * non-default channel. Starting with OMAP4, there are more than 2
+ * channels, with one defined as the default (on OMAP4, it's MPU.)
+ * Only the non-default channel can be configured.
+ */
+static int omap_vc_config_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+
+ /*
+ * For default channel, the only configurable bit is RACEN.
+ * All others must stay at zero (see function comment above.)
+ */
+ if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
+ vc->cfg_channel &= vc_cfg_bits->racen;
+
+ voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
+ vc->cfg_channel << vc->cfg_channel_sa_shift,
+ vc->cfg_channel_reg);
+
+ return 0;
+}
+
+/* Voltage scale and accessory APIs */
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 vc_cmdval;
+
+ /* Check if sufficient pmic info is available for this vdd */
+ if (!voltdm->pmic) {
+ pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ if (!voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC function to convert voltage in uV to"
+ "vsel not registered. Hence unable to scale voltage"
+ "for vdd_%s\n", __func__, voltdm->name);
+ return -ENODATA;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ *target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
+ *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
+
+ /* Setting the ON voltage to the new target voltage */
+ vc_cmdval = voltdm->read(vc->cmdval_reg);
+ vc_cmdval &= ~vc->common->cmd_on_mask;
+ vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
+ voltdm->write(vc_cmdval, vc->cmdval_reg);
+
+ omap_vp_update_errorgain(voltdm, target_volt);
+
+ return 0;
+}
+
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel)
+{
+ u32 smps_steps = 0, smps_delay = 0;
+
+ smps_steps = abs(target_vsel - current_vsel);
+ /* SMPS slew rate / step size. 2us added as buffer. */
+ smps_delay = ((smps_steps * voltdm->pmic->step_size) /
+ voltdm->pmic->slew_rate) + 2;
+ udelay(smps_delay);
+}
+
+/* vc_bypass_scale - VC bypass method of voltage scaling */
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 loop_cnt = 0, retries_cnt = 0;
+ u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+ u8 target_vsel, current_vsel;
+ int ret;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ vc_valid = vc->common->valid;
+ vc_bypass_val_reg = vc->common->bypass_val_reg;
+ vc_bypass_value = (target_vsel << vc->common->data_shift) |
+ (vc->volt_reg_addr << vc->common->regaddr_shift) |
+ (vc->i2c_slave_addr << vc->common->slaveaddr_shift);
+
+ voltdm->write(vc_bypass_value, vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
+
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ /*
+ * Loop till the bypass command is acknowledged from the SMPS.
+ * NOTE: This is legacy code. The loop count and retry count needs
+ * to be revisited.
+ */
+ while (!(vc_bypass_value & vc_valid)) {
+ loop_cnt++;
+
+ if (retries_cnt > 10) {
+ pr_warning("%s: Retry count exceeded\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ }
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+ return 0;
+}
+
+static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+{
+ /*
+ * Voltage Manager FSM parameters init
+ * XXX This data should be passed in from the board file
+ */
+ voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+
+ if (is_initialized)
+ return;
+
+ omap3_vfsm_init(voltdm);
+
+ is_initialized = true;
+}
+
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* XXX These are magic numbers and do not belong! */
+ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+ is_initialized = true;
+}
+
+/**
+ * omap_vc_i2c_init - initialize I2C interface to PMIC
+ * @voltdm: voltage domain containing VC data
+ *
+ * Use PMIC supplied seetings for I2C high-speed mode and
+ * master code (if set) and program the VC I2C configuration
+ * register.
+ *
+ * The VC I2C configuration is common to all VC channels,
+ * so this function only configures I2C for the first VC
+ * channel registers. All other VC channels will use the
+ * same configuration.
+ */
+static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ static bool initialized;
+ static bool i2c_high_speed;
+ u8 mcode;
+
+ if (initialized) {
+ if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
+ pr_warn("%s: I2C config for all channels must match.",
+ __func__);
+ return;
+ }
+
+ i2c_high_speed = voltdm->pmic->i2c_high_speed;
+ if (i2c_high_speed)
+ voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_reg);
+
+ mcode = voltdm->pmic->i2c_mcode;
+ if (mcode)
+ voltdm->rmw(vc->common->i2c_mcode_mask,
+ mcode << __ffs(vc->common->i2c_mcode_mask),
+ vc->common->i2c_cfg_reg);
+
+ initialized = true;
+}
+
+void __init omap_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+ u32 val;
+
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC info requried to configure vc for"
+ "vdd_%s not populated.Hence cannot initialize vc\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vc->cfg_channel = 0;
+ if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
+ vc_cfg_bits = &vc_mutant_channel_cfg;
+ else
+ vc_cfg_bits = &vc_default_channel_cfg;
+
+ /* get PMIC/board specific settings */
+ vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
+ vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
+ vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
+ vc->setup_time = voltdm->pmic->volt_setup_time;
+
+ /* Configure the i2c slave address for this VC */
+ voltdm->rmw(vc->smps_sa_mask,
+ vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
+ vc->smps_sa_reg);
+ vc->cfg_channel |= vc_cfg_bits->sa;
+
+ /*
+ * Configure the PMIC register addresses.
+ */
+ voltdm->rmw(vc->smps_volra_mask,
+ vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+ vc->smps_volra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rav;
+
+ if (vc->cmd_reg_addr) {
+ voltdm->rmw(vc->smps_cmdra_mask,
+ vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
+ vc->smps_cmdra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
+ }
+
+ /* Set up the on, inactive, retention and off voltage */
+ on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
+ onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
+ ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
+ off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
+ val = ((on_vsel << vc->common->cmd_on_shift) |
+ (onlp_vsel << vc->common->cmd_onlp_shift) |
+ (ret_vsel << vc->common->cmd_ret_shift) |
+ (off_vsel << vc->common->cmd_off_shift));
+ voltdm->write(val, vc->cmdval_reg);
+ vc->cfg_channel |= vc_cfg_bits->cmd;
+
+ /* Channel configuration */
+ omap_vc_config_channel(voltdm);
+
+ /* Configure the setup times */
+ voltdm->rmw(voltdm->vfsm->voltsetup_mask,
+ vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
+ voltdm->vfsm->voltsetup_reg);
+
+ omap_vc_i2c_init(voltdm);
+
+ if (cpu_is_omap34xx())
+ omap3_vc_init_channel(voltdm);
+ else if (cpu_is_omap44xx())
+ omap4_vc_init_channel(voltdm);
+}
+
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..478bf6b 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -19,12 +19,12 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
/**
- * struct omap_vc_common_data - per-VC register/bitfield data
+ * struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
- * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
- * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
@@ -33,15 +33,16 @@
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
+ * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
+ * @i2c_mcode_mask: MCODE field mask for I2C config register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
-struct omap_vc_common_data {
+struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
- u8 smps_sa_reg;
- u8 smps_volra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
@@ -50,34 +51,75 @@
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
+ u8 i2c_cfg_reg;
+ u8 i2c_cfg_hsen_mask;
+ u8 i2c_mcode_mask;
};
+/* omap_vc_channel.flags values */
+#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
+#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
+
/**
- * struct omap_vc_instance_data - VC per-instance data
- * @vc_common: pointer to VC common data for this platform
- * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
- * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
- * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
+ * struct omap_vc_channel - VC per-instance data
+ * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command configuration register address
+ * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
+ * @cfg_channel: current value of VC channel configuration register
+ * @i2c_high_speed: whether or not to use I2C high-speed mode
*
- * XXX It is not necessary to have both a *_mask and a *_shift -
- * remove one
+ * @common: pointer to VC common data for this platform
+ * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
+ * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
+ * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
+ * @cmdval_reg: register for on/ret/off voltage level values for this channel
+ * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
+ * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
+ * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
+ * @cfg_channel_reg: VC channel configuration register
+ * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
+ * @flags: VC channel-specific flags (optional)
*/
-struct omap_vc_instance_data {
- const struct omap_vc_common_data *vc_common;
+struct omap_vc_channel {
+ /* channel state */
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
+ u16 setup_time;
+ u8 cfg_channel;
+ bool i2c_high_speed;
+
+ /* register access data */
+ const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
+ u32 smps_cmdra_mask;
u8 cmdval_reg;
- u8 smps_sa_shift;
- u8 smps_volra_shift;
+ u8 smps_sa_reg;
+ u8 smps_volra_reg;
+ u8 smps_cmdra_reg;
+ u8 cfg_channel_reg;
+ u8 cfg_channel_sa_shift;
+ u8 flags;
};
-extern struct omap_vc_instance_data omap3_vc1_data;
-extern struct omap_vc_instance_data omap3_vc2_data;
+extern struct omap_vc_channel omap3_vc_mpu;
+extern struct omap_vc_channel omap3_vc_core;
-extern struct omap_vc_instance_data omap4_vc_mpu_data;
-extern struct omap_vc_instance_data omap4_vc_iva_data;
-extern struct omap_vc_instance_data omap4_vc_core_data;
+extern struct omap_vc_channel omap4_vc_mpu;
+extern struct omap_vc_channel omap4_vc_iva;
+extern struct omap_vc_channel omap4_vc_core;
+
+void omap_vc_init_channel(struct voltagedomain *voltdm);
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel);
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel);
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..cfe348e 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -29,9 +29,7 @@
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static struct omap_vc_common_data omap3_vc_common = {
- .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+static struct omap_vc_common omap3_vc_common = {
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
.data_shift = OMAP3430_DATA_SHIFT,
.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
@@ -42,22 +40,33 @@
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
+ .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
+ .i2c_mcode_mask = OMAP3430_MCODE_MASK,
};
-struct omap_vc_instance_data omap3_vc1_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_mpu = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
- .smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
};
-struct omap_vc_instance_data omap3_vc2_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_core = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
- .smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
};
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..2740a96 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -30,9 +30,7 @@
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static const struct omap_vc_common_data omap4_vc_common = {
- .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+static const struct omap_vc_common omap4_vc_common = {
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
.data_shift = OMAP4430_DATA_SHIFT,
.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
@@ -43,33 +41,49 @@
.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
+ .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
+ .i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
/* VC instance data for each controllable voltage line */
-struct omap_vc_instance_data omap4_vc_mpu_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_mpu = {
+ .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT,
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_iva_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_iva = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_core_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_core = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
};
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..64070ac 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -21,10 +21,10 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <plat/common.h>
@@ -36,839 +36,88 @@
#include "control.h"
#include "voltage.h"
+#include "powerdomain.h"
#include "vc.h"
#include "vp.h"
-#define VOLTAGE_DIR_SIZE 16
-
-
-static struct omap_vdd_info **vdd_info;
-
-/*
- * Number of scalable voltage domains.
- */
-static int nr_scalable_vdd;
-
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
-static struct dentry *voltage_dir;
-
-/* Init function pointers */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt);
-
-static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap2_prm_read_mod_reg(mod, offset);
-}
-
-static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap2_prm_write_mod_reg(val, mod, offset);
-}
-
-static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- mod, offset);
-}
-
-static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
-}
-
-static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
-{
- char *sys_ck_name;
- struct clk *sys_ck;
- u32 sys_clk_speed, timeout_val, waittime;
-
- /*
- * XXX Clockfw should handle this, or this should be in a
- * struct record
- */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- sys_ck_name = "sys_ck";
- else if (cpu_is_omap44xx())
- sys_ck_name = "sys_clkin_ck";
- else
- return -EINVAL;
-
- /*
- * Sys clk rate is require to calculate vp timeout value and
- * smpswaittimemin and smpswaittimemax.
- */
- sys_ck = clk_get(NULL, sys_ck_name);
- if (IS_ERR(sys_ck)) {
- pr_warning("%s: Could not get the sys clk to calculate"
- "various vdd_%s params\n", __func__, vdd->voltdm.name);
- return -EINVAL;
- }
- sys_clk_speed = clk_get_rate(sys_ck);
- clk_put(sys_ck);
- /* Divide to avoid overflow */
- sys_clk_speed /= 1000;
-
- /* Generic voltage parameters */
- vdd->volt_scale = vp_forceupdate_scale_voltage;
- vdd->vp_enabled = false;
-
- vdd->vp_rt_data.vpconfig_erroroffset =
- (vdd->pmic_info->vp_erroroffset <<
- vdd->vp_data->vp_common->vpconfig_erroroffset_shift);
-
- timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
- vdd->vp_rt_data.vlimitto_timeout = timeout_val;
- vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
- vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
-
- waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
- sys_clk_speed) / 1000;
- vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime;
- vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime;
- vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
- vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
-
- return 0;
-}
-
-/* Voltage debugfs support */
-static int vp_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
- u8 vsel;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info->vsel_to_uv) {
- pr_warning("PMIC function to convert vsel to voltage"
- "in uV not registerd\n");
- return -EINVAL;
- }
-
- *val = vdd->pmic_info->vsel_to_uv(vsel);
- return 0;
-}
-
-static int nom_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- *val = omap_voltage_get_nom_volt(&vdd->voltdm);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
- "%llu\n");
-static void vp_latch_vsel(struct omap_vdd_info *vdd)
-{
- u32 vpconfig;
- unsigned long uvdc;
- char vsel;
-
- uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
- if (!uvdc) {
- pr_warning("%s: unable to find current voltage for vdd_%s\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_warning("%s: PMIC function to convert voltage in uV to"
- " vsel not registered\n", __func__);
- return;
- }
-
- vsel = vdd->pmic_info->uv_to_vsel(uvdc);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
- vdd->vp_data->vp_common->vpconfig_initvdd);
- vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
-
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-}
-
-/* Generic voltage init functions */
-static void __init vp_init(struct omap_vdd_info *vdd)
-{
- u32 vp_val;
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- vp_val = vdd->vp_rt_data.vpconfig_erroroffset |
- (vdd->vp_rt_data.vpconfig_errorgain <<
- vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
- vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
-
- vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
- vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
- (vdd->vp_rt_data.vstepmin_stepmin <<
- vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
-
- vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
- vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
- (vdd->vp_rt_data.vstepmax_stepmax <<
- vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
-
- vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
- vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
- (vdd->vp_rt_data.vlimitto_vddmin <<
- vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
- (vdd->vp_rt_data.vlimitto_timeout <<
- vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
-}
-
-static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
-{
- char *name;
-
- name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
- if (!name) {
- pr_warning("%s: Unable to allocate memory for debugfs"
- " directory name for vdd_%s",
- __func__, vdd->voltdm.name);
- return;
- }
- strcpy(name, "vdd_");
- strcat(name, vdd->voltdm.name);
-
- vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
- kfree(name);
- if (IS_ERR(vdd->debug_dir)) {
- pr_warning("%s: Unable to create debugfs directory for"
- " vdd_%s\n", __func__, vdd->voltdm.name);
- vdd->debug_dir = NULL;
- return;
- }
-
- (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vpconfig_errorgain));
- (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_smpswaittimemin));
- (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_stepmin));
- (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_smpswaittimemax));
- (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_stepmax));
- (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmax));
- (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmin));
- (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_timeout));
- (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
- (void *) vdd, &vp_volt_debug_fops);
- (void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
- vdd->debug_dir, (void *) vdd,
- &nom_volt_debug_fops);
-}
-
-/* Voltage scale and accessory APIs */
-static int _pre_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
-{
- struct omap_volt_data *volt_data;
- const struct omap_vc_common_data *vc_common;
- const struct omap_vp_common_data *vp_common;
- u32 vc_cmdval, vp_errgain_val;
-
- vc_common = vdd->vc_data->vc_common;
- vp_common = vdd->vp_data->vp_common;
-
- /* Check if suffiecient pmic info is available for this vdd */
- if (!vdd->pmic_info) {
- pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- if (!vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, vdd->voltdm.name);
- return -ENODATA;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- /* Get volt_data corresponding to target_volt */
- volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
- if (IS_ERR(volt_data))
- volt_data = NULL;
-
- *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- /* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
- vc_cmdval &= ~vc_common->cmd_on_mask;
- vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /* Setting vp errorgain based on the voltage */
- if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
- vdd->vp_data->vpconfig);
- vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
- vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
- vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
- vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
- vdd->vp_data->vpconfig);
- }
-
- return 0;
-}
-
-static void _post_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 target_vsel, u8 current_vsel)
-{
- u32 smps_steps = 0, smps_delay = 0;
-
- smps_steps = abs(target_vsel - current_vsel);
- /* SMPS slew rate / step size. 2us added as buffer. */
- smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
- vdd->pmic_info->slew_rate) + 2;
- udelay(smps_delay);
-
- vdd->curr_volt = target_volt;
-}
-
-/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
-static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 loop_cnt = 0, retries_cnt = 0;
- u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
- u8 target_vsel, current_vsel;
- int ret;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- vc_valid = vdd->vc_data->vc_common->valid;
- vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg;
- vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) |
- (vdd->pmic_info->pmic_reg <<
- vdd->vc_data->vc_common->regaddr_shift) |
- (vdd->pmic_info->i2c_slave_addr <<
- vdd->vc_data->vc_common->slaveaddr_shift);
-
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
- vc_bypass_val_reg);
-
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
- /*
- * Loop till the bypass command is acknowledged from the SMPS.
- * NOTE: This is legacy code. The loop count and retry count needs
- * to be revisited.
- */
- while (!(vc_bypass_value & vc_valid)) {
- loop_cnt++;
-
- if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
- return -ETIMEDOUT;
- }
-
- if (loop_cnt > 50) {
- retries_cnt++;
- loop_cnt = 0;
- udelay(10);
- }
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
- vc_bypass_val_reg);
- }
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
- return 0;
-}
-
-/* VP force update method of voltage scaling */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 vpconfig;
- u8 target_vsel, current_vsel, prm_irqst_reg;
- int ret, timeout = 0;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg;
-
- /*
- * Clear all pending TransactionDone interrupt/status. Typical latency
- * is <3us
- */
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
- if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, vdd->voltdm.name);
- return -ETIMEDOUT;
- }
-
- /* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
- vdd->vp_data->vp_common->vpconfig_forceupdate |
- vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
- vpconfig |= ((target_vsel <<
- vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Force update of voltage */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for TransactionDone. Typical latency is <200us.
- * Depends on SMPSWAITTIMEMIN/MAX and voltage change
- */
- timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status),
- VP_TRANXDONE_TIMEOUT, timeout);
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, vdd->voltdm.name);
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
-
- /*
- * Disable TransactionDone interrupt , clear all status, clear
- * control registers
- */
- timeout = 0;
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
-
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
- __func__, vdd->voltdm.name);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear initVDD copy trigger bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear force bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- return 0;
-}
-
-static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
-{
- /*
- * Voltage Manager FSM parameters init
- * XXX This data should be passed in from the board file
- */
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* Set up the on, inactive, retention and off voltage */
- on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
- onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
- ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
- off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
- vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) |
- (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
- (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
- (off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
-
- omap3_vfsm_init(vdd);
-
- is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* TODO: Configure setup times and CMD_VAL values*/
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
- OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
- OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
-
- /* XXX These are magic numbers and do not belong! */
- vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
- is_initialized = true;
-}
-
-static void __init omap_vc_init(struct omap_vdd_info *vdd)
-{
- u32 vc_val;
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
- vc_val &= ~vdd->vc_data->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
-
- /* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
- vc_val &= ~vdd->vc_data->smps_volra_mask;
- vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
-
- /* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
- vc_val &= ~vdd->vfsm->voltsetup_mask;
- vc_val |= vdd->pmic_info->volt_setup_time <<
- vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
-
- if (cpu_is_omap34xx())
- omap3_vc_init(vdd);
- else if (cpu_is_omap44xx())
- omap4_vc_init(vdd);
-}
-
-static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd)
-{
- int ret = -EINVAL;
-
- if (!vdd->pmic_info) {
- pr_err("%s: PMIC info requried to configure vdd_%s not"
- "populated.Hence cannot initialize vdd_%s\n",
- __func__, vdd->voltdm.name, vdd->voltdm.name);
- goto ovdc_out;
- }
-
- if (IS_ERR_VALUE(_config_common_vdd_data(vdd)))
- goto ovdc_out;
-
- if (cpu_is_omap34xx()) {
- vdd->read_reg = omap3_voltage_read_reg;
- vdd->write_reg = omap3_voltage_write_reg;
- ret = 0;
- } else if (cpu_is_omap44xx()) {
- vdd->read_reg = omap4_voltage_read_reg;
- vdd->write_reg = omap4_voltage_write_reg;
- ret = 0;
- }
-
-ovdc_out:
- return ret;
-}
+static LIST_HEAD(voltdm_list);
/* Public functions */
/**
- * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
- * @voltdm: pointer to the VDD for which current voltage info is needed
+ * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
+ * @voltdm: pointer to the voltdm for which current voltage info is needed
*
- * API to get the current non-auto-compensated voltage for a VDD.
- * Returns 0 in case of error else returns the current voltage for the VDD.
+ * API to get the current non-auto-compensated voltage for a voltage domain.
+ * Returns 0 in case of error else returns the current voltage.
*/
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return 0;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->curr_volt;
+ return voltdm->nominal_volt;
}
/**
- * omap_vp_get_curr_volt() - API to get the current vp voltage.
- * @voltdm: pointer to the VDD.
- *
- * This API returns the current voltage for the specified voltage processor
- */
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u8 curr_vsel;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return 0;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg) {
- pr_err("%s: No read API for reading vdd_%s regs\n",
- __func__, voltdm->name);
- return 0;
- }
-
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
- pr_warning("%s: PMIC function to convert vsel to voltage"
- "in uV not registerd\n", __func__);
- return 0;
- }
-
- return vdd->pmic_info->vsel_to_uv(curr_vsel);
-}
-
-/**
- * omap_vp_enable() - API to enable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be enabled.
- *
- * This API enables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_enable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already enabled, do nothing. Return */
- if (vdd->vp_enabled)
- return;
-
- vp_latch_vsel(vdd);
-
- /* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- vdd->vp_enabled = true;
-}
-
-/**
- * omap_vp_disable() - API to disable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be disabled.
- *
- * This API disables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_disable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
- int timeout;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already disabled, do nothing. Return */
- if (!vdd->vp_enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
- return;
- }
-
- /* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
- */
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
- VP_IDLE_TIMEOUT, timeout);
-
- if (timeout >= VP_IDLE_TIMEOUT)
- pr_warning("%s: vdd_%s idle timedout\n",
- __func__, voltdm->name);
-
- vdd->vp_enabled = false;
-
- return;
-}
-
-/**
- * omap_voltage_scale_vdd() - API to scale voltage of a particular
- * voltage domain.
- * @voltdm: pointer to the VDD which is to be scaled.
- * @target_volt: The target voltage of the voltage domain
+ * voltdm_scale() - API to scale voltage of a particular voltage domain.
+ * @voltdm: pointer to the voltage domain which is to be scaled.
+ * @target_volt: The target voltage of the voltage domain
*
* This API should be called by the kernel to do the voltage scaling
- * for a particular voltage domain during dvfs or any other situation.
+ * for a particular voltage domain during DVFS.
*/
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt)
+int voltdm_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
{
- struct omap_vdd_info *vdd;
+ int ret;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_scale) {
+ if (!voltdm->scale) {
pr_err("%s: No voltage scale API registered for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
- return vdd->volt_scale(vdd, target_volt);
+ ret = voltdm->scale(voltdm, target_volt);
+ if (!ret)
+ voltdm->nominal_volt = target_volt;
+
+ return ret;
}
/**
- * omap_voltage_reset() - Resets the voltage of a particular voltage domain
- * to that of the current OPP.
- * @voltdm: pointer to the VDD whose voltage is to be reset.
+ * voltdm_reset() - Resets the voltage of a particular voltage domain
+ * to that of the current OPP.
+ * @voltdm: pointer to the voltage domain whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
* to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
-void omap_voltage_reset(struct voltagedomain *voltdm)
+void voltdm_reset(struct voltagedomain *voltdm)
{
- unsigned long target_uvdc;
+ unsigned long target_volt;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- target_uvdc = omap_voltage_get_nom_volt(voltdm);
- if (!target_uvdc) {
+ target_volt = voltdm_get_voltage(voltdm);
+ if (!target_volt) {
pr_err("%s: unable to find current voltage for vdd_%s\n",
__func__, voltdm->name);
return;
}
- omap_voltage_scale_vdd(voltdm, target_uvdc);
+ voltdm_scale(voltdm, target_volt);
}
/**
@@ -884,18 +133,14 @@
*
*/
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
- struct omap_volt_data **volt_data)
+ struct omap_volt_data **volt_data)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- *volt_data = vdd->volt_data;
+ *volt_data = voltdm->volt_data;
}
/**
@@ -914,9 +159,8 @@
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt)
+ unsigned long volt)
{
- struct omap_vdd_info *vdd;
int i;
if (!voltdm || IS_ERR(voltdm)) {
@@ -924,17 +168,15 @@
return ERR_PTR(-EINVAL);
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_data) {
+ if (!voltdm->volt_data) {
pr_warning("%s: voltage table does not exist for vdd_%s\n",
__func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
- for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
- if (vdd->volt_data[i].volt_nominal == volt)
- return &vdd->volt_data[i];
+ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+ if (voltdm->volt_data[i].volt_nominal == volt)
+ return &voltdm->volt_data[i];
}
pr_notice("%s: Unable to match the current voltage with the voltage"
@@ -947,54 +189,25 @@
* omap_voltage_register_pmic() - API to register PMIC specific data
* @voltdm: pointer to the VDD for which the PMIC specific data is
* to be registered
- * @pmic_info: the structure containing pmic info
+ * @pmic: the structure containing pmic info
*
* This API is to be called by the SOC/PMIC file to specify the
- * pmic specific info as present in omap_volt_pmic_info structure.
+ * pmic specific info as present in omap_voltdm_pmic structure.
*/
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
+ struct omap_voltdm_pmic *pmic)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- vdd->pmic_info = pmic_info;
+ voltdm->pmic = pmic;
return 0;
}
/**
- * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
- * corresponding to a voltage domain.
- *
- * @voltdm: pointer to the VDD whose debug directory is required.
- *
- * This API returns pointer to the debugfs directory corresponding
- * to the voltage domain. Should be used by drivers requiring to
- * add any debug entry for a particular voltage domain. Returns NULL
- * in case of error.
- */
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return NULL;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->debug_dir;
-}
-
-/**
* omap_change_voltscale_method() - API to change the voltage scaling method.
* @voltdm: pointer to the VDD whose voltage scaling method
* has to be changed.
@@ -1005,23 +218,19 @@
* defined in voltage.h
*/
void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method)
+ int voltscale_method)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
switch (voltscale_method) {
case VOLTSCALE_VPFORCEUPDATE:
- vdd->volt_scale = vp_forceupdate_scale_voltage;
+ voltdm->scale = omap_vp_forceupdate_scale;
return;
case VOLTSCALE_VCBYPASS:
- vdd->volt_scale = vc_bypass_scale_voltage;
+ voltdm->scale = omap_vc_bypass_scale;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
@@ -1030,38 +239,6 @@
}
/**
- * omap_voltage_domain_lookup() - API to get the voltage domain pointer
- * @name: Name of the voltage domain
- *
- * This API looks up in the global vdd_info struct for the
- * existence of voltage domain <name>. If it exists, the API returns
- * a pointer to the voltage domain structure corresponding to the
- * VDD<name>. Else retuns error pointer.
- */
-struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- int i;
-
- if (!vdd_info) {
- pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
- __func__);
- return ERR_PTR(-EINVAL);
- }
-
- if (!name) {
- pr_err("%s: No name to get the votage domain!\n", __func__);
- return ERR_PTR(-EINVAL);
- }
-
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (!(strcmp(name, vdd_info[i]->voltdm.name)))
- return &vdd_info[i]->voltdm;
- }
-
- return ERR_PTR(-EINVAL);
-}
-
-/**
* omap_voltage_late_init() - Init the various voltage parameters
*
* This API is to be called in the later stages of the
@@ -1070,37 +247,184 @@
*/
int __init omap_voltage_late_init(void)
{
- int i;
+ struct voltagedomain *voltdm;
- if (!vdd_info) {
+ if (list_empty(&voltdm_list)) {
pr_err("%s: Voltage driver support not added\n",
__func__);
return -EINVAL;
}
- voltage_dir = debugfs_create_dir("voltage", NULL);
- if (IS_ERR(voltage_dir))
- pr_err("%s: Unable to create voltage debugfs main dir\n",
- __func__);
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (omap_vdd_data_configure(vdd_info[i]))
+ list_for_each_entry(voltdm, &voltdm_list, node) {
+ struct clk *sys_ck;
+
+ if (!voltdm->scalable)
continue;
- omap_vc_init(vdd_info[i]);
- vp_init(vdd_info[i]);
- vdd_debugfs_init(vdd_info[i]);
+
+ sys_ck = clk_get(NULL, voltdm->sys_clk.name);
+ if (IS_ERR(sys_ck)) {
+ pr_warning("%s: Could not get sys clk.\n", __func__);
+ return -EINVAL;
+ }
+ voltdm->sys_clk.rate = clk_get_rate(sys_ck);
+ WARN_ON(!voltdm->sys_clk.rate);
+ clk_put(sys_ck);
+
+ if (voltdm->vc) {
+ voltdm->scale = omap_vc_bypass_scale;
+ omap_vc_init_channel(voltdm);
+ }
+
+ if (voltdm->vp) {
+ voltdm->scale = omap_vp_forceupdate_scale;
+ omap_vp_init(voltdm);
+ }
}
return 0;
}
-/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count)
+static struct voltagedomain *_voltdm_lookup(const char *name)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
- vdd_info = omap_vdd_array;
- nr_scalable_vdd = omap_vdd_count;
+ struct voltagedomain *voltdm, *temp_voltdm;
+
+ voltdm = NULL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ if (!strcmp(name, temp_voltdm->name)) {
+ voltdm = temp_voltdm;
+ break;
+ }
+ }
+
+ return voltdm;
+}
+
+/**
+ * voltdm_add_pwrdm - add a powerdomain to a voltagedomain
+ * @voltdm: struct voltagedomain * to add the powerdomain to
+ * @pwrdm: struct powerdomain * to associate with a voltagedomain
+ *
+ * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This
+ * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
+{
+ if (!voltdm || !pwrdm)
+ return -EINVAL;
+
+ pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
+ "%s\n", pwrdm->name, voltdm->name);
+
+ list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
+
return 0;
}
+
+/**
+ * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm
+ * @voltdm: struct voltagedomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each powerdomain in the
+ * voltagedomain @voltdm. Returns -EINVAL if presented with invalid
+ * pointers; or passes along the last return value of the callback
+ * function, which should be 0 for success or anything else to
+ * indicate failure.
+ */
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm))
+{
+ struct powerdomain *pwrdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node)
+ ret = (*fn)(voltdm, pwrdm);
+
+ return ret;
+}
+
+/**
+ * voltdm_for_each - call function on each registered voltagedomain
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each registered voltagedomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator. Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
+ */
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user)
+{
+ struct voltagedomain *temp_voltdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ ret = (*fn)(temp_voltdm, user);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int _voltdm_register(struct voltagedomain *voltdm)
+{
+ if (!voltdm || !voltdm->name)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&voltdm->pwrdm_list);
+ list_add(&voltdm->node, &voltdm_list);
+
+ pr_debug("voltagedomain: registered %s\n", voltdm->name);
+
+ return 0;
+}
+
+/**
+ * voltdm_lookup - look up a voltagedomain by name, return a pointer
+ * @name: name of voltagedomain
+ *
+ * Find a registered voltagedomain by its name @name. Returns a pointer
+ * to the struct voltagedomain if found, or NULL otherwise.
+ */
+struct voltagedomain *voltdm_lookup(const char *name)
+{
+ struct voltagedomain *voltdm ;
+
+ if (!name)
+ return NULL;
+
+ voltdm = _voltdm_lookup(name);
+
+ return voltdm;
+}
+
+/**
+ * voltdm_init - set up the voltagedomain layer
+ * @voltdm_list: array of struct voltagedomain pointers to register
+ *
+ * Loop through the array of voltagedomains @voltdm_list, registering all
+ * that are available on the current CPU. If voltdm_list is supplied
+ * and not null, all of the referenced voltagedomains will be
+ * registered. No return value.
+ */
+void voltdm_init(struct voltagedomain **voltdms)
+{
+ struct voltagedomain **v;
+
+ if (voltdms) {
+ for (v = voltdms; *v; v++)
+ _voltdm_register(*v);
+ }
+}
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..16a1b09 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -19,6 +19,8 @@
#include "vc.h"
#include "vp.h"
+struct powerdomain;
+
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
@@ -32,29 +34,60 @@
#define OMAP3_VOLTSETUP2 0xff
/**
- * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
+ * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
- * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
- * XXX It is not necessary to have both a _mask and a _shift for the same
- * bitfield - remove one!
*/
-struct omap_vfsm_instance_data {
+struct omap_vfsm_instance {
u32 voltsetup_mask;
u8 voltsetup_reg;
- u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique
- * identifier.
+ * @name: Name of the voltage domain which can be used as a unique identifier.
+ * @scalable: Whether or not this voltage domain is scalable
+ * @node: list_head linking all voltage domains
+ * @pwrdm_list: list_head linking all powerdomains in this voltagedomain
+ * @vc: pointer to VC channel associated with this voltagedomain
+ * @vp: pointer to VP associated with this voltagedomain
+ * @read: read a VC/VP register
+ * @write: write a VC/VP register
+ * @read: read-modify-write a VC/VP register
+ * @sys_clk: system clock name/frequency, used for various timing calculations
+ * @scale: function used to scale the voltage of the voltagedomain
+ * @nominal_volt: current nominal voltage for this voltage domain
+ * @volt_data: voltage table having the distinct voltages supported
+ * by the domain and other associated per voltage data.
*/
struct voltagedomain {
char *name;
+ bool scalable;
+ struct list_head node;
+ struct list_head pwrdm_list;
+ struct omap_vc_channel *vc;
+ const struct omap_vfsm_instance *vfsm;
+ struct omap_vp_instance *vp;
+ struct omap_voltdm_pmic *pmic;
+
+ /* VC/VP register access functions: SoC specific */
+ u32 (*read) (u8 offset);
+ void (*write) (u32 val, u8 offset);
+ u32 (*rmw)(u32 mask, u32 bits, u8 offset);
+
+ union {
+ const char *name;
+ u32 rate;
+ } sys_clk;
+
+ int (*scale) (struct voltagedomain *voltdm,
+ unsigned long target_volt);
+
+ u32 nominal_volt;
+ struct omap_volt_data *volt_data;
};
/**
@@ -77,13 +110,18 @@
};
/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
+ * @i2c_slave_addr: I2C slave address of PMIC
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
+ * @i2c_mcode: master code value for I2C high-speed preamble transmission
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
-struct omap_volt_pmic_info {
+struct omap_voltdm_pmic {
int slew_rate;
int step_size;
u32 on_volt;
@@ -91,94 +129,44 @@
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
- u8 i2c_slave_addr;
- u8 pmic_reg;
+ bool i2c_high_speed;
+ u8 i2c_mcode;
unsigned long (*vsel_to_uv) (const u8 vsel);
u8 (*uv_to_vsel) (unsigned long uV);
};
-/**
- * omap_vdd_info - Per Voltage Domain info
- *
- * @volt_data : voltage table having the distinct voltages supported
- * by the domain and other associated per voltage data.
- * @pmic_info : pmic specific parameters which should be populted by
- * the pmic drivers.
- * @vp_data : the register values, shifts, masks for various
- * vp registers
- * @vp_rt_data : VP data derived at runtime, not predefined
- * @vc_data : structure containing various various vc registers,
- * shifts, masks etc.
- * @vfsm : voltage manager FSM data
- * @voltdm : pointer to the voltage domain structure
- * @debug_dir : debug directory for this voltage domain.
- * @curr_volt : current voltage for this vdd.
- * @vp_enabled : flag to keep track of whether vp is enabled or not
- * @volt_scale : API to scale the voltage of the vdd.
- */
-struct omap_vdd_info {
- struct omap_volt_data *volt_data;
- struct omap_volt_pmic_info *pmic_info;
- struct omap_vp_instance_data *vp_data;
- struct omap_vp_runtime_data vp_rt_data;
- struct omap_vc_instance_data *vc_data;
- const struct omap_vfsm_instance_data *vfsm;
- struct voltagedomain voltdm;
- struct dentry *debug_dir;
- u32 curr_volt;
- bool vp_enabled;
- u32 (*read_reg) (u16 mod, u8 offset);
- void (*write_reg) (u32 val, u16 mod, u8 offset);
- int (*volt_scale) (struct omap_vdd_info *vdd,
- unsigned long target_volt);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count);
-#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info);
+ struct omap_voltdm_pmic *pmic);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
-{
- return -EINVAL;
-}
-static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
- return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
+extern void omap2xxx_voltagedomains_init(void);
+extern void omap3xxx_voltagedomains_init(void);
+extern void omap44xx_voltagedomains_init(void);
+
+struct voltagedomain *voltdm_lookup(const char *name);
+void voltdm_init(struct voltagedomain **voltdm_list);
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user);
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm));
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+void voltdm_reset(struct voltagedomain *voltdm);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif
diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
new file mode 100644
index 0000000..7a41349
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
@@ -0,0 +1,32 @@
+/*
+ * OMAP3 voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain omap2_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain omap2_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap2[] __initdata = {
+ &omap2_voltdm_core,
+ &omap2_voltdm_wkup,
+ NULL,
+};
+
+void __init omap2xxx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_omap2);
+}
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..071101d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -31,65 +31,70 @@
* VDD data
*/
-static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd1_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
};
-static struct omap_vdd_info omap3_vdd1_info = {
- .vp_data = &omap3_vp1_data,
- .vc_data = &omap3_vc1_data,
- .vfsm = &omap3_vdd1_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd2_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
};
-static struct omap_vdd_info omap3_vdd2_info = {
- .vp_data = &omap3_vp2_data,
- .vc_data = &omap3_vc2_data,
- .vfsm = &omap3_vdd2_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap3_voltdm_mpu = {
+ .name = "mpu_iva",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_mpu,
+ .vfsm = &omap3_vdd1_vfsm,
+ .vp = &omap3_vp_mpu,
};
-/* OMAP3 VDD structures */
-static struct omap_vdd_info *omap3_vdd_info[] = {
- &omap3_vdd1_info,
- &omap3_vdd2_info,
+static struct voltagedomain omap3_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_core,
+ .vfsm = &omap3_vdd2_vfsm,
+ .vp = &omap3_vp_core,
};
-/* OMAP3 specific voltage init functions */
-static int __init omap3xxx_voltage_early_init(void)
+static struct voltagedomain omap3_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap3[] __initdata = {
+ &omap3_voltdm_mpu,
+ &omap3_voltdm_core,
+ &omap3_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_ck";
+
+void __init omap3xxx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
- if (!cpu_is_omap34xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
if (cpu_is_omap3630()) {
- omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
} else {
- omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
- ARRAY_SIZE(omap3_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap3);
};
-core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..c4584e9 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -32,71 +32,80 @@
#include "vc.h"
#include "vp.h"
-static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_mpu_info = {
- .vp_data = &omap4_vp_mpu_data,
- .vc_data = &omap4_vc_mpu_data,
- .vfsm = &omap4_vdd_mpu_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_iva_info = {
- .vp_data = &omap4_vp_iva_data,
- .vc_data = &omap4_vc_iva_data,
- .vfsm = &omap4_vdd_iva_vfsm_data,
- .voltdm = {
- .name = "iva",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_core_info = {
- .vp_data = &omap4_vp_core_data,
- .vc_data = &omap4_vc_core_data,
- .vfsm = &omap4_vdd_core_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap4_voltdm_mpu = {
+ .name = "mpu",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_mpu,
+ .vfsm = &omap4_vdd_mpu_vfsm,
+ .vp = &omap4_vp_mpu,
};
-/* OMAP4 VDD structures */
-static struct omap_vdd_info *omap4_vdd_info[] = {
- &omap4_vdd_mpu_info,
- &omap4_vdd_iva_info,
- &omap4_vdd_core_info,
+static struct voltagedomain omap4_voltdm_iva = {
+ .name = "iva",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_iva,
+ .vfsm = &omap4_vdd_iva_vfsm,
+ .vp = &omap4_vp_iva,
};
-/* OMAP4 specific voltage init functions */
-static int __init omap44xx_voltage_early_init(void)
+static struct voltagedomain omap4_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_core,
+ .vfsm = &omap4_vdd_core_vfsm,
+ .vp = &omap4_vp_core,
+};
+
+static struct voltagedomain omap4_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap4[] __initdata = {
+ &omap4_voltdm_mpu,
+ &omap4_voltdm_iva,
+ &omap4_voltdm_core,
+ &omap4_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_clkin_ck";
+
+void __init omap44xx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
- if (!cpu_is_omap44xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
- omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
- omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
- omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
+ omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
+ omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
+ omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
- ARRAY_SIZE(omap4_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap4);
};
-core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
new file mode 100644
index 0000000..66bd700
--- /dev/null
+++ b/arch/arm/mach-omap2/vp.c
@@ -0,0 +1,278 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <plat/common.h>
+
+#include "voltage.h"
+#include "vp.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ char vsel;
+
+ vsel = voltdm->pmic->uv_to_vsel(volt);
+
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
+ vp->common->vpconfig_forceupdate |
+ vp->common->vpconfig_initvdd);
+ vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /* Trigger initVDD value copy to voltage processor */
+ voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
+ vp->vpconfig);
+
+ /* Clear initVDD copy trigger bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return vpconfig;
+}
+
+/* Generic voltage init functions */
+void __init omap_vp_init(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 val, sys_clk_rate, timeout, waittime;
+ u32 vddmin, vddmax, vstepmin, vstepmax;
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vp->enabled = false;
+
+ /* Divide to avoid overflow */
+ sys_clk_rate = voltdm->sys_clk.rate / 1000;
+
+ timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
+ vddmin = voltdm->pmic->vp_vddmin;
+ vddmax = voltdm->pmic->vp_vddmax;
+
+ waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
+ sys_clk_rate) / 1000;
+ vstepmin = voltdm->pmic->vp_vstepmin;
+ vstepmax = voltdm->pmic->vp_vstepmax;
+
+ /*
+ * VP_CONFIG: error gain is not set here, it will be updated
+ * on each scale, based on OPP.
+ */
+ val = (voltdm->pmic->vp_erroroffset <<
+ __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
+ vp->common->vpconfig_timeouten;
+ voltdm->write(val, vp->vpconfig);
+
+ /* VSTEPMIN */
+ val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
+ (vstepmin << vp->common->vstepmin_stepmin_shift);
+ voltdm->write(val, vp->vstepmin);
+
+ /* VSTEPMAX */
+ val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
+ (waittime << vp->common->vstepmax_smpswaittimemax_shift);
+ voltdm->write(val, vp->vstepmax);
+
+ /* VLIMITTO */
+ val = (vddmax << vp->common->vlimitto_vddmax_shift) |
+ (vddmin << vp->common->vlimitto_vddmin_shift) |
+ (timeout << vp->common->vlimitto_timeout_shift);
+ voltdm->write(val, vp->vlimitto);
+}
+
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_volt_data *volt_data;
+
+ if (!voltdm->vp)
+ return -EINVAL;
+
+ /* Get volt_data corresponding to target_volt */
+ volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
+ if (IS_ERR(volt_data))
+ return -EINVAL;
+
+ /* Setting vp errorgain based on the voltage */
+ voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
+ volt_data->vp_errgain <<
+ __ffs(voltdm->vp->common->vpconfig_errorgain_mask),
+ voltdm->vp->vpconfig);
+
+ return 0;
+}
+
+/* VP force update method of voltage scaling */
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ u8 target_vsel, current_vsel;
+ int ret, timeout = 0;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear all pending TransactionDone interrupt/status. Typical latency
+ * is <3us
+ */
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+ if (timeout >= VP_TRANXDONE_TIMEOUT) {
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+ "Voltage change aborted", __func__, voltdm->name);
+ return -ETIMEDOUT;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, target_volt);
+
+ /* Force update of voltage */
+ voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
+ voltdm->vp->vpconfig);
+
+ /*
+ * Wait for TransactionDone. Typical latency is <200us.
+ * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+ */
+ timeout = 0;
+ omap_test_timeout(vp->common->ops->check_txdone(vp->id),
+ VP_TRANXDONE_TIMEOUT, timeout);
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+ "TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+
+ /*
+ * Disable TransactionDone interrupt , clear all status, clear
+ * control registers
+ */
+ timeout = 0;
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+ "to clear the TRANXDONE status\n",
+ __func__, voltdm->name);
+
+ /* Clear force bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return 0;
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig, volt;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already enabled, do nothing. Return */
+ if (vp->enabled)
+ return;
+
+ volt = voltdm_get_voltage(voltdm);
+ if (!volt) {
+ pr_warning("%s: unable to find current voltage for %s\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, volt);
+
+ /* Enable VP */
+ vpconfig |= vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ vp->enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig;
+ int timeout;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already disabled, do nothing. Return */
+ if (!vp->enabled) {
+ pr_warning("%s: Trying to disable VP for vdd_%s when"
+ "it is already disabled\n", __func__, voltdm->name);
+ return;
+ }
+
+ /* Disable VP */
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /*
+ * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+ */
+ omap_test_timeout((voltdm->read(vp->vstatus)),
+ VP_IDLE_TIMEOUT, timeout);
+
+ if (timeout >= VP_IDLE_TIMEOUT)
+ pr_warning("%s: vdd_%s idle timedout\n",
+ __func__, voltdm->name);
+
+ vp->enabled = false;
+
+ return;
+}
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..7c155d2 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -19,44 +19,60 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
+/**
+ * struct omap_vp_ops - per-VP operations
+ * @check_txdone: check for VP transaction done
+ * @clear_txdone: clear VP transaction done status
+ */
+struct omap_vp_ops {
+ u32 (*check_txdone)(u8 vp_id);
+ void (*clear_txdone)(u8 vp_id);
+};
/**
- * struct omap_vp_common_data - register data common to all VDDs
+ * struct omap_vp_common - register data common to all VDDs
+ * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
+ * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
* @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
- * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
- * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
- * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
- * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
- * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
- *
- * XXX It it not necessary to have both a mask and a shift for the same
- * bitfield - remove one
- * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
+ * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
+ * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
+ * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
+ * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
+ * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
*/
-struct omap_vp_common_data {
+struct omap_vp_common {
+ u32 vpconfig_erroroffset_mask;
u32 vpconfig_errorgain_mask;
u32 vpconfig_initvoltage_mask;
- u32 vpconfig_timeouten;
- u32 vpconfig_initvdd;
- u32 vpconfig_forceupdate;
- u32 vpconfig_vpenable;
- u8 vpconfig_erroroffset_shift;
- u8 vpconfig_errorgain_shift;
- u8 vpconfig_initvoltage_shift;
+ u8 vpconfig_timeouten;
+ u8 vpconfig_initvdd;
+ u8 vpconfig_forceupdate;
+ u8 vpconfig_vpenable;
u8 vstepmin_stepmin_shift;
u8 vstepmin_smpswaittimemin_shift;
u8 vstepmax_stepmax_shift;
@@ -64,80 +80,49 @@
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
+ u8 vpvoltage_mask;
+
+ const struct omap_vp_ops *ops;
};
/**
- * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
- * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- *
- * XXX prm_irqst_reg does not belong here
- * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
- * hardware bug
- * XXX This structure is probably not needed
- */
-struct omap_vp_prm_irqst_data {
- u8 prm_irqst_reg;
- u32 tranxdone_status;
-};
-
-/**
- * struct omap_vp_instance_data - VP register offsets (per-VDD)
- * @vp_common: pointer to struct omap_vp_common_data * for this SoC
- * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
+ * struct omap_vp_instance - VP register offsets (per-VDD)
+ * @common: pointer to struct omap_vp_common * for this SoC
* @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
* @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
* @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
* @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
* @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
+ * @id: Unique identifier for VP instance.
+ * @enabled: flag to keep track of whether vp is enabled or not
*
* XXX vp_common is probably not needed since it is per-SoC
*/
-struct omap_vp_instance_data {
- const struct omap_vp_common_data *vp_common;
- const struct omap_vp_prm_irqst_data *prm_irqst_data;
+struct omap_vp_instance {
+ const struct omap_vp_common *common;
u8 vpconfig;
u8 vstepmin;
u8 vstepmax;
u8 vlimitto;
u8 vstatus;
u8 voltage;
+ u8 id;
+ bool enabled;
};
-/**
- * struct omap_vp_runtime_data - VP data populated at runtime by code
- * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
- * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
- * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
- * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
- * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
- *
- * XXX Is this structure really needed? Why not just program the
- * device directly? They are in PRM space, therefore in the WKUP
- * powerdomain, so register contents should not be lost in off-mode.
- * XXX Some of these fields are incorrectly named, e.g., vstep*
- */
-struct omap_vp_runtime_data {
- u32 vpconfig_erroroffset;
- u16 vpconfig_errorgain;
- u16 vstepmin_smpswaittimemin;
- u16 vstepmax_smpswaittimemax;
- u16 vlimitto_timeout;
- u8 vstepmin_stepmin;
- u8 vstepmax_stepmax;
- u8 vlimitto_vddmin;
- u8 vlimitto_vddmax;
-};
+extern struct omap_vp_instance omap3_vp_mpu;
+extern struct omap_vp_instance omap3_vp_core;
-extern struct omap_vp_instance_data omap3_vp1_data;
-extern struct omap_vp_instance_data omap3_vp2_data;
+extern struct omap_vp_instance omap4_vp_mpu;
+extern struct omap_vp_instance omap4_vp_iva;
+extern struct omap_vp_instance omap4_vp_core;
-extern struct omap_vp_instance_data omap4_vp_mpu_data;
-extern struct omap_vp_instance_data omap4_vp_iva_data;
-extern struct omap_vp_instance_data omap4_vp_core_data;
+void omap_vp_init(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..260c554 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -25,16 +25,20 @@
#include "voltage.h"
#include "vp.h"
+#include "prm2xxx_3xxx.h"
+
+static const struct omap_vp_ops omap3_vp_ops = {
+ .check_txdone = omap3_prm_vp_check_txdone,
+ .clear_txdone = omap3_prm_vp_clear_txdone,
+};
/*
* VP data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap3_vp_common = {
- .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap3_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
@@ -47,36 +51,29 @@
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+
+ .ops = &omap3_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp1_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_mpu = {
+ .id = OMAP3_VP_VDD_MPU_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp1_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp2_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_core = {
+ .id = OMAP3_VP_VDD_CORE_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp2_prm_irqst_data,
};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..b4e7704 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -27,15 +27,18 @@
#include "vp.h"
+static const struct omap_vp_ops omap4_vp_ops = {
+ .check_txdone = omap4_prm_vp_check_txdone,
+ .clear_txdone = omap4_prm_vp_clear_txdone,
+};
+
/*
* VP data common to 44xx chips
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap4_vp_common = {
- .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap4_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
@@ -48,53 +51,39 @@
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
+ .ops = &omap4_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
- .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_mpu_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_mpu = {
+ .id = OMAP4_VP_VDD_MPU_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_iva_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_iva = {
+ .id = OMAP4_VP_VDD_IVA_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_iva_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_core_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_core = {
+ .id = OMAP4_VP_VDD_CORE_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_core_prm_irqst_data,
};
-
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@
#ifdef CONFIG_MACH_D2NET
MACHINE_START(D2NET, "LaCie d2 Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -348,7 +348,7 @@
#ifdef CONFIG_MACH_BIGDISK
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index a3e3e9e..88432ab 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -359,7 +359,7 @@
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index c105556..9e5c166 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -730,7 +730,7 @@
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
/* Maintainer: Christopher Moore <moore@free.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b..f340ed8 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/orion5x.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =ORION5X_REGS_PHYS_BASE
ldr \rv, =ORION5X_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
deleted file mode 100644
index 6769917..0000000
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 0038124..9115511 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -380,7 +380,7 @@
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -393,7 +393,7 @@
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@
#ifdef CONFIG_MACH_LINKSTATION_MINI
MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e..6020e26 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(MSS2, "Maxtor Shared Storage II")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 63ff10c..b3356ad 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,7 +229,7 @@
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 291d22b..8c87666 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,7 +169,7 @@
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 3f02362..994644f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,7 +181,7 @@
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 27fd38e..1903d25 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -306,7 +306,7 @@
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..e06fdae 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -122,7 +122,7 @@
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a34e4fa..3061832 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,7 +358,7 @@
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c983161..3dbcd5e 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -323,7 +323,7 @@
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cc33b22..23c9e2e 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -312,7 +312,7 @@
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 2653595..1c63a76 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -173,7 +173,7 @@
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 251ef15..4fd9f18 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 6339975..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@
MACHINE_START(PNX4008, "Philips PNX4008")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = pnx4008_map_io,
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afeb..469d60d 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00090000
add \rv, \rp, #0xf4000000 @ virtual
add \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
deleted file mode 100644
index 1275db6..0000000
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106..cd97492 100644
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
#include <mach/hardware.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
deleted file mode 100644
index 368cd5a..0000000
--- a/arch/arm/mach-prima2/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/memory.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-/*
- * Restrict DMA-able region to workaround silicon limitation.
- * The limitation restricts buffers available for DMA to SD/MMC
- * hardware to be below 256MB
- */
-#define ARM_DMA_ZONE_SIZE (SZ_256M)
-
-#endif
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 9cda205..66c6387 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -13,7 +13,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/memory.h>
#define L2X0_ADDR_FILTERING_START 0xC00
#define L2X0_ADDR_FILTERING_END 0xC04
@@ -41,9 +40,9 @@
/*
* set the physical memory windows L2 cache will cover
*/
- writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
+ writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
- writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
+ writel_relaxed(PHYS_OFFSET | 0x1,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
writel_relaxed(0,
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124b..ee33c3d 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -31,11 +31,12 @@
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
+ .dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index ef3e8b1..7765d67 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -828,5 +828,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab..4efc16d 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 13cf518..349896c 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -513,7 +513,7 @@
#endif
MACHINE_START(ARMCORE, "Compulab CM-X2XX")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b6a5134..9ac0225 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -852,7 +852,7 @@
}
MACHINE_START(CM_X300, "CM-X300 module")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 8709209..7db6646 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
@@ -315,7 +315,7 @@
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781..c825e8b 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631..692e1ff 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812ea..5e2cf39 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@
}
MACHINE_START(CSB726, "Cogent CSB726")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea5..94acc0b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@
}
MACHINE_START(EM_X270, "Compulab EM-X270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b4599ec..e823c54 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -189,7 +189,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -239,7 +239,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -362,7 +362,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -551,7 +551,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -743,7 +743,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -948,7 +948,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb..8308eee 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -863,7 +863,7 @@
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -929,7 +929,7 @@
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111..9c8208c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@
}
MACHINE_START(GUMSTIX, "Gumstix")
- .boot_params = 0xa0000100, /* match u-boot bi_boot_params */
+ .atag_offset = 0x100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a23512..4b5e110 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@
}
MACHINE_START(H5400, "HP iPAQ H5000")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab..f2c3245 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a47..6f6368e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@
}
MACHINE_START(H4700, "HP iPAQ HX4700")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429..f78d5db 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c751..70b112e 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
orr \rv, \rp, #io_p2v(0x40000000) @ virtual
orr \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
deleted file mode 100644
index d05a597..0000000
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/memory.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index b09e848..ca60757 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -19,6 +19,8 @@
#include <linux/io.h>
#include <linux/irq.h>
+#include <asm/exception.h>
+
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15..0037e57 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c171d6e..16df0fc 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -499,7 +499,7 @@
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
/* Maintainer: Peter Barada */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd..4b796c3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 4622eb7..cc6e14f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -616,7 +616,7 @@
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0xa0000100, /* BLOB boot parameter setting */
+ .atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f9..b938fc2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@
}
MACHINE_START(MIOA701, "MIO A701")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861..4af5d51 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@
/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
MACHINE_START(NEC_MP900, "MobilePro900/C")
- .boot_params = 0xa0220100,
+ .atag_offset = 0x220100,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365..3d4a281 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@
}
MACHINE_START(PALMLD, "Palm LifeDrive")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47..99d6bcf 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c..6ec7cae 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f..9376da0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@
}
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index bb27d4b..7346fbf 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -440,7 +440,7 @@
}
MACHINE_START(TREO680, "Palm Treo 680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
@@ -450,7 +450,7 @@
MACHINE_END
MACHINE_START(CENTRO, "Palm Centro 685")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fc42855..2b9e76f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@
}
MACHINE_START(PALMTX, "Palm T|X")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc..68e18ba 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@
}
MACHINE_START(PALMZ72, "Palm Zire72")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65df..0b825a3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@
MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
/* Maintainer: Pengutronix */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd905..6810cdd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@
#ifdef CONFIG_MACH_RAUMFELD_RC
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@
#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@
#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index df4356e..602d70b 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index ebd6379..5ce3403 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -103,7 +103,7 @@
}
MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af..4c9a48b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
@@ -1016,6 +1016,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e..ad47bb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8ea..fd56916 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@
}
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c041750..35bbf13 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
@@ -564,7 +564,7 @@
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc7..242ddae 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@
MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490a..a7539a6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@
}
MACHINE_START(VPAC270, "Voipac PXA270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f..54930cc 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -180,7 +180,7 @@
}
MACHINE_START(XCEP, "Iskratel XCEP")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6c9275a..84ed72d 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -686,7 +686,7 @@
*/
PSPR = 0x0;
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
}
#else
#define z2_power_off NULL
@@ -718,7 +718,7 @@
}
MACHINE_START(ZIPIT2, "Zipit Z2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 99c49bc..c424e7d 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@
MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b..31d4968 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687c..fb4901c 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
#error "Unknown RealView platform"
#endif
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xfb000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 4ae943b..e83c654 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -52,12 +52,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "Realview: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..026c66a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..7263dea 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -358,7 +358,7 @@
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..671ad6d 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..cbf22df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..8ec7e52 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effff..6d28cc9 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00010000
orr \rp, \rp, #0x00000fe0
orr \rv, \rp, #0xe0000000 @ virtual
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 580b3c7..a9241eb 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@
MACHINE_START(RISCPC, "Acorn-RiscPC")
/* Maintainer: Russell King */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.reserve_lp0 = 1,
.reserve_lp1 = 1,
.map_io = rpc_map_io,
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
deleted file mode 100644
index 3f33670..0000000
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x0C000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882dea..4135de8 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
deleted file mode 100644
index f92b97b..0000000
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@
}
MACHINE_START(AML_M5900, "AML_M5900")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>,
Ben Dooks <ben-linux@fluff.org>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
@@ -596,7 +596,7 @@
MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@
MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f775..367d376 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@
}
MACHINE_START(QT2410, "QT2410")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
/* Maintainer: Jonas Dietsche */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@
}
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@
MACHINE_START(VR1000, "Thorcom-VR1000")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index f1d3bd8..343a540 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -170,7 +170,9 @@
{
printk("S3C2410: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2410_sysdev);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb475..286ef17 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@
MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 834cfb6..d6325ed 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -128,7 +128,7 @@
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2412, "SMDK2412")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -150,7 +150,7 @@
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 83544eb..5955c15 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,7 +156,7 @@
}
MACHINE_START(VSTMS, "VSTMS")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = vstms_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index ef0958d..57a1e01 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -245,7 +245,9 @@
{
printk("S3C2412: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2412_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2412_sysdev);
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@
MACHINE_START(SMDK2416, "SMDK2416")
/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 494ce91..20b3fdf 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -97,7 +97,9 @@
s3c_fb_setname("s3c2443-fb");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2416_sysdev);
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@
MACHINE_START(ANUBIS, "Simtec-Anubis")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@
MACHINE_START(AT2440EVB, "AT2440EVB")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4..de1e0ff 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b..91fe0b4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@
MACHINE_START(MINI2440, "MINI2440")
/* Maintainer: Michel Pollet <buserror@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@
MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@
MACHINE_START(RX1950, "HP iPAQ RX1950")
/* Maintainers: Vasily Khoruzhick */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@
MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ce99ff7..2270d33 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -55,7 +55,9 @@
/* register suspend/resume handlers */
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 9ad99f8..6f2b65e 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -169,7 +169,9 @@
{
printk("S3C2442: Initialising architecture\n");
+#ifdef CONFIG_PM
register_syscore_ops(&s3c2410_pm_syscore_ops);
+#endif
register_syscore_ops(&s3c244x_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2443, "SMDK2443")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e..8dc0576 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -145,6 +146,7 @@
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
if (!idcode) {
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e705..c0c076a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
deleted file mode 100644
index 4760cda..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x50000000)
-
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb88643..d164a28 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe..4c76e08 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -766,7 +766,7 @@
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc..19a0887 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49b..e91f63f 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -349,7 +349,7 @@
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857..c30f2e5 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1..10870cb 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -329,7 +329,7 @@
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8df..cbb57de 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 5796397..04f914b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183..7b66ede 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -703,7 +703,7 @@
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..8a93854 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -111,6 +112,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6..e80ba3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#include <plat/regs-serial.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000
ldr \rp, [\rp, #0x118 ]
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
deleted file mode 100644
index 365a6eb..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8df..3b84e9b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -171,7 +171,7 @@
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf..d99d29b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -190,7 +190,7 @@
MACHINE_START(SMDK6450, "SMDK6450")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95d..694f759 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79..0000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d890..688f45b 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -254,7 +254,7 @@
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..9114572 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -119,6 +120,7 @@
void __init s5pv210_map_io(void)
{
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ init_consistent_dma_size(14 << 20);
/* initialise device information early */
s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe65..79e5559 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0..2d3cfa2 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
* Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f..5811a96 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..061cc7e 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@
MACHINE_START(GONI, "GONI")
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@
MACHINE_START(SMDKC110, "SMDKC110")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc..e73e3b6d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -319,7 +319,7 @@
MACHINE_START(SMDKV210, "SMDKV210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@
MACHINE_START(TORBRECK, "TORBRECK")
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..d40da5f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,7 +447,7 @@
MACHINE_START(ASSABET, "Intel-Assabet")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
.init_irq = sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@
}
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = badge4_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3100_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3600_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@
*/
MACHINE_START(HACKKIT, "HackKit Cpu Board")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = hackkit_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9..530772d 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
moveq \rp, #0x80000000 @ physical base address
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@
MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = jornada720_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@
}
MACHINE_START(LART, "LART")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = lart_map_io,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@
}
MACHINE_START(NANOENGINE, "BSE nanoEngine")
- .boot_params = 0xc0000000,
+ .atag_offset = 0x100,
.map_io = nanoengine_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = shannon_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..a1c2427 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -229,7 +229,7 @@
MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..feda3ca 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
- .boot_params = 0x08003000,
+ .atag_offset = 0x3000,
.map_io = shark_map_io,
.init_irq = shark_init_irq,
.timer = &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55..20eb2bf 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xe0000000
orr \rp, \rp, #0x000003f8
mov \rv, \rp
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd62..5fde49d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -447,6 +448,8 @@
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 523f608..b622d8d 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -42,6 +42,7 @@
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/dma-mapping.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
@@ -1170,6 +1171,8 @@
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b..8b620bf 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7367.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -260,6 +261,8 @@
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c555..7719ddc 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -274,6 +275,8 @@
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 17c19dc..de2253d 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
@@ -1381,6 +1382,8 @@
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7a..1a1c00c 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10..8d4a416 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c..0ffbe81 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 66f9806..e4e485f 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -56,6 +56,12 @@
unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
deleted file mode 100644
index 5173522..0000000
--- a/arch/arm/mach-spear3xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/memory.h
- *
- * Memory map for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@
}
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@
}
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@
}
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
deleted file mode 100644
index 781f088..0000000
--- a/arch/arm/mach-spear6xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/memory.h
- *
- * Memory map for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@
}
MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
.timer = &spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 846cd7d..a4d1980 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -179,7 +179,7 @@
}
MACHINE_START(HARMONY, "harmony")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_harmony_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index ea2f79c..3197c4c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -127,7 +127,7 @@
}
MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 56cbabf..9e98ac7 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -201,7 +201,7 @@
MACHINE_START(SEABOARD, "seaboard")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -210,7 +210,7 @@
MACHINE_END
MACHINE_START(KAEN, "kaen")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -219,7 +219,7 @@
MACHINE_END
MACHINE_START(WARIO, "wario")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 89a6d2a..8489aa8 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -171,7 +171,7 @@
}
MACHINE_START(TRIMSLICE, "trimslice")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_trimslice_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e1016a..0e0fd4d 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -32,7 +32,6 @@
#include <asm/system.h>
-#include <mach/hardware.h>
#include <mach/clk.h>
/* Frequency table index must be sequential starting at 0 */
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65..619abc6 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
#include <mach/io.h>
#include <mach/iomap.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
deleted file mode 100644
index 537db3a..0000000
--- a/arch/arm/mach-tegra/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/memory.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_MEMORY_H
-#define __MACH_TEGRA_MEMORY_H
-
-/* physical offset of RAM */
-#define PLAT_PHYS_OFFSET UL(0)
-
-#endif
-
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 0886cbc..7d2b5d0 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -114,10 +114,10 @@
{
unsigned int i, ncores = scu_get_core_count(scu_base);
- if (ncores > NR_CPUS) {
- printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 399c89f..376b6df 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
+#include <linux/dma-mapping.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -92,6 +93,8 @@
void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ /* We enable a real big DMA buffer if need be. */
+ init_consistent_dma_size(SZ_4M);
}
/*
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* If we move the address using MMU, use this. */
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..7034bae 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -16,7 +16,7 @@
#ifdef CONFIG_MACH_U300_DUAL_RAM
#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
+#define BOOT_PARAMS_OFFSET 0x100
#else
@@ -24,19 +24,14 @@
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET (0x100 + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
#else
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
#endif
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..80e7305 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,7 +61,7 @@
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .boot_params = BOOT_PARAMS_OFFSET,
+ .atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
.reserve = u300_reserve,
.init_irq = u300_init_irq,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 4210cb4..a3e0c86 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
+ select ARM_ERRATA_754322
menu "Ux500 SoC"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cd54aba..2cc4876 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -645,7 +645,7 @@
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -654,7 +654,7 @@
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
@@ -662,7 +662,7 @@
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e58f0f5..166d47a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -118,7 +118,7 @@
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05..8d74d92 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_BASE @ no, physical address
ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
deleted file mode 100644
index 2ef697a..0000000
--- a/arch/arm/mach-ux500/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index a33df5f..eb51991 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -156,12 +156,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "U8500: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7d..d0fbd7f 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x001F0000
orr \rp, \rp, #0x00001000
orr \rv, \rp, #0xf1000000 @ virtual base
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
deleted file mode 100644
index dacc9d8..0000000
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@
MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index bfd32f5..2b1e836 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -221,6 +221,12 @@
{
int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e..fd9e6c7 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
#define DEBUG_LL_UART_OFFSET 0x00009000
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
deleted file mode 100644
index 5b7fcd4..0000000
--- a/arch/arm/mach-vexpress/include/mach/memory.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x60000000)
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a..1fafc32 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@
}
MACHINE_START(BV07, "Benign BV07 Mini Netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = vt8500_reserve_mem,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f119162..ca292f2 100644
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00200000
orr \rv, \rp, #0xf8000000
orr \rp, \rp, #0xd8000000
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
deleted file mode 100644
index 175f914..0000000
--- a/arch/arm/mach-vt8500/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@
}
MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = wm8505_reserve_mem,
.map_io = wm8505_map_io,
.init_irq = wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
deleted file mode 100644
index f02905b..0000000
--- a/arch/arm/mach-w90x900/include/mach/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90P910EVB, "W90P910EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc910evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@
MACHINE_START(W90P950EVB, "W90P950EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc950evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90N960EVB, "W90N960EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc960evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5..3ab0be1 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
#include <mach/zynq_soc.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical
ldr \rv, =LL_UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
deleted file mode 100644
index 35a9263..0000000
--- a/arch/arm/mach-zynq/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/memory.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MEMORY_H__
-#define __MACH_MEMORY_H__
-
-#include <asm/sizes.h>
-
-#define PLAT_PHYS_OFFSET UL(0x0)
-
-#endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c3ff82f..01f5987 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
+#include <asm/mach/arch.h>
#include "mm.h"
@@ -117,26 +119,37 @@
}
#ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT)
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+ unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+ BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+ BUG_ON(base < VMALLOC_END);
+
+ /* Grow region to accommodate specified size */
+ if (base < consistent_base)
+ consistent_base = base;
+}
#include "vmregion.h"
static struct arm_vmregion_head consistent_head = {
.vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
@@ -155,7 +168,17 @@
pmd_t *pmd;
pte_t *pte;
int i = 0;
- u32 base = CONSISTENT_BASE;
+ unsigned long base = consistent_base;
+ unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+ consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+ if (!consistent_pte) {
+ pr_err("%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+ consistent_head.vm_start = base;
do {
pgd = pgd_offset(&init_mm, base);
@@ -198,7 +221,7 @@
size_t align;
int bit;
- if (!consistent_pte[0]) {
+ if (!consistent_pte) {
printk(KERN_ERR "%s: not initialised\n", __func__);
dump_stack();
return NULL;
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 3b5ea68..aa33949 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -20,6 +20,7 @@
#include <linux/highmem.h>
#include <linux/perf_event.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index cc7e2d8..04e9a92 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -496,6 +496,13 @@
*/
bank_start = min(bank_start,
ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#else
+ /*
+ * Align down here since the VM subsystem insists that the
+ * memmap entries are valid from the bank start aligned to
+ * MAX_ORDER_NR_PAGES.
+ */
+ bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
#endif
/*
* If we had a previous bank, and there is a space
@@ -653,9 +660,6 @@
" ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n"
#endif
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
-#ifdef CONFIG_MMU
- " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n"
-#endif
" vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
" lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
#ifdef CONFIG_HIGHMEM
@@ -674,9 +678,6 @@
MLK(ITCM_OFFSET, (unsigned long) itcm_end),
#endif
MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
- MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
MLM(VMALLOC_START, VMALLOC_END),
MLM(PAGE_OFFSET, (unsigned long)high_memory),
#ifdef CONFIG_HIGHMEM
@@ -699,9 +700,6 @@
* be detected at build time already.
*/
#ifdef CONFIG_MMU
- BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
- BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-
BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
BUG_ON(TASK_SIZE > MODULES_VADDR);
#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 594d677..ea9c9f3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_SO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_MT_UNCACHED,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+ PMD_SECT_UNCACHED | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2e6849b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,31 +379,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index cd8f79c..9f8fd91 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,31 +394,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 4
+.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 69e7f2e..7d91545 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@
mov pc, lr
.globl cpu_sa1100_suspend_size
-.equ cpu_sa1100_suspend_size, 4*4
+.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
- stmia r0, {r4 - r7} @ store cp regs
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r6} @ store cp regs
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
- ldmia r0, {r4 - r7} @ load cp regs
+ ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
@@ -189,13 +188,9 @@
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- mov r0, r7 @ control register
- mov r2, r5, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a923aa0..d061d2f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,18 @@
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
-.equ cpu_v6_suspend_size, 4 * 8
+.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
- mrc p15, 0, r11, c1, c0, 0 @ control register
- stmia r0, {r4 - r11}
- ldmfd sp!, {r4- r11, pc}
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r9, c1, c0, 0 @ control register
+ stmia r0, {r4 - r9}
+ ldmfd sp!, {r4- r9, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
@@ -150,25 +148,21 @@
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
- ldmia r0, {r4 - r11}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0, {r4 - r9}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
- mov r0, r11 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
string cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 9049c07..6af366c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,56 +217,50 @@
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 9
+.equ cpu_v7_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- stmia r0!, {r4 - r6}
+ mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ TTB 0
- mrc p15, 0, r8, c2, c0, 1 @ TTB 1
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
- ldmfd sp!, {r4 - r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r8, c1, c0, 0 @ Control register
+ mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r6 - r10}
+ ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- ldmia r0!, {r4 - r6}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ TTB 0
- mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
- teq r4, r10 @ Is it already set?
- mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ teq r4, r9 @ Is it already set?
+ mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
+ mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
- mov r0, r9 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
__CPUINIT
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 755e1bf..abf0507 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 7
+.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmia sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
@@ -433,15 +432,10 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =0x542e @ section flags
+ orr r1, r1, #0x18 @ cache the page table in L2
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index fbc06e5..3277904 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@
.align
.globl cpu_xscale_suspend_size
-.equ cpu_xscale_suspend_size, 4 * 7
+.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmfd sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -545,13 +544,9 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index ace4bb5..c850af3 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -64,6 +64,8 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
@@ -97,4 +99,9 @@
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91..a304593 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -54,7 +54,7 @@
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
deleted file mode 100644
index 35e6c7f..0000000
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#define MX1_PHYS_OFFSET UL(0x08000000)
-#define MX21_PHYS_OFFSET UL(0xc0000000)
-#define MX25_PHYS_OFFSET UL(0x80000000)
-#define MX27_PHYS_OFFSET UL(0xa0000000)
-#define MX3x_PHYS_OFFSET UL(0x80000000)
-#define MX50_PHYS_OFFSET UL(0x70000000)
-#define MX51_PHYS_OFFSET UL(0x90000000)
-#define MX53_PHYS_OFFSET UL(0x70000000)
-
-#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
-# if defined CONFIG_ARCH_MX3
-# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
-# endif
-#endif
-
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bb8f4a6..95732af 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,6 +14,7 @@
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98d..bd9a06b 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -26,54 +26,8 @@
#include <plat/mmc.h>
#include <mach/gpio.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 75a847d..de7896f 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
* Copyright (C) 2005 Nokia Corporation
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
@@ -29,168 +35,80 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
#include <plat/dmtimer.h>
-#include <mach/irqs.h>
-static int dm_timer_count;
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
-#ifdef CONFIG_ARCH_OMAP1
-static struct omap_dm_timer omap1_dm_timers[] = {
- { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
- { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
- { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
- { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
- { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
- { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
-};
-
-static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
-
-#else
-#define omap1_dm_timers NULL
-#define omap1_dm_timer_count 0
-#endif /* CONFIG_ARCH_OMAP1 */
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_dm_timer omap2_dm_timers[] = {
- { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
-};
-
-static const char *omap2_dm_source_names[] __initdata = {
- "sys_ck",
- "func_32k_ck",
- "alt_ck",
- NULL
-};
-
-static struct clk *omap2_dm_source_clocks[3];
-static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-
-#else
-#define omap2_dm_timers NULL
-#define omap2_dm_timer_count 0
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_dm_timer omap3_dm_timers[] = {
- { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
-};
-
-static const char *omap3_dm_source_names[] __initdata = {
- "sys_ck",
- "omap_32k_fck",
- NULL
-};
-
-static struct clk *omap3_dm_source_clocks[2];
-static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
-
-#else
-#define omap3_dm_timers NULL
-#define omap3_dm_timer_count 0
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
- { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
- { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
- { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
- { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
- { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
- { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
- { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
- { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
- { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
-};
-static const char *omap4_dm_source_names[] __initdata = {
- "sys_clkin_ck",
- "sys_32k_ck",
- NULL
-};
-static struct clk *omap4_dm_source_clocks[2];
-static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
-
-#else
-#define omap4_dm_timers NULL
-#define omap4_dm_timer_count 0
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP4 */
-
-static struct omap_dm_timer *dm_timers;
-static const char **dm_source_names;
-static struct clk **dm_source_clocks;
-
-static spinlock_t dm_timer_lock;
-
-/*
- * Reads timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode write pending bit must be
- * checked. Otherwise a read of a non completed write will produce an error.
+/**
+ * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
*/
static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ return __omap_dm_timer_read(timer, reg, timer->posted);
}
-/*
- * Writes timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode the write pending bit must be
- * checked. Otherwise a write on a register which has a pending write will be
- * lost.
+/**
+ * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @value: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
*/
static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
u32 value)
{
- __omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ __omap_dm_timer_write(timer, reg, value, timer->posted);
+}
+
+static void omap_timer_restore_context(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
+ timer->context.tiocp_cfg);
+ if (timer->revision > 1)
+ __raw_writel(timer->context.tistat, timer->sys_stat);
+
+ __raw_writel(timer->context.tisr, timer->irq_stat);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
+ timer->context.twer);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
+ timer->context.tcrr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
+ timer->context.tldr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
+ timer->context.tmar);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ timer->context.tsicr);
+ __raw_writel(timer->context.tier, timer->irq_ena);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
+ timer->context.tclr);
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
int c;
+ if (!timer->sys_stat)
+ return;
+
c = 0;
- while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ while (!(__raw_readl(timer->sys_stat) & 1)) {
c++;
if (c > 100000) {
printk(KERN_ERR "Timer failed to reset\n");
@@ -201,53 +119,65 @@
static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- int autoidle = 0, wakeup = 0;
-
- if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
+ omap_dm_timer_enable(timer);
+ if (timer->pdev->id != 1) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
omap_dm_timer_wait_for_reset(timer);
}
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Enable autoidle on OMAP2+ */
- if (cpu_class_is_omap2())
- autoidle = 1;
-
- /*
- * Enable wake-up on OMAP2 CPUs.
- */
- if (cpu_class_is_omap2())
- wakeup = 1;
-
- __omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
+ __omap_dm_timer_reset(timer, 0, 0);
+ omap_dm_timer_disable(timer);
timer->posted = 1;
}
-void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ int ret;
+
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
+
+ if (pdata->needs_manual_reset)
+ omap_dm_timer_reset(timer);
+
+ ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ timer->posted = 1;
+ return ret;
}
struct omap_dm_timer *omap_dm_timer_request(void)
{
- struct omap_dm_timer *timer = NULL;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
- int i;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- for (i = 0; i < dm_timer_count; i++) {
- if (dm_timers[i].reserved)
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
continue;
- timer = &dm_timers[i];
+ timer = t;
timer->reserved = 1;
break;
}
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- if (timer != NULL)
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
return timer;
}
@@ -255,74 +185,65 @@
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
- struct omap_dm_timer *timer;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
- spin_unlock_irqrestore(&dm_timer_lock, flags);
- printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
- __FILE__, __LINE__, __func__, id);
- dump_stack();
- return NULL;
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->pdev->id == id && !t->reserved) {
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
}
- timer = &dm_timers[id-1];
- timer->reserved = 1;
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer%d request failed!\n", __func__, id);
return timer;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+int omap_dm_timer_free(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
- omap_dm_timer_disable(timer);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ clk_put(timer->fclk);
WARN_ON(!timer->reserved);
timer->reserved = 0;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
- if (timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_enable(timer->fclk);
- clk_enable(timer->iclk);
- }
-#endif
-
- timer->enabled = 1;
+ pm_runtime_get_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
- if (!timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_disable(timer->iclk);
- clk_disable(timer->fclk);
- }
-#endif
-
- timer->enabled = 0;
+ pm_runtime_put(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
- return timer->irq;
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
@@ -334,24 +255,29 @@
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int i;
+ int i = 0;
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (i = 0; i < dm_timer_count; i++) {
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
u32 l;
- l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (l & OMAP_TIMER_CTRL_ST) {
if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ i++;
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
return inputmask;
}
@@ -361,7 +287,9 @@
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- return timer->fclk;
+ if (timer)
+ return timer->fclk;
+ return NULL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
@@ -375,70 +303,91 @@
#endif
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+int omap_dm_timer_trigger(struct omap_dm_timer *timer)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+int omap_dm_timer_start(struct omap_dm_timer *timer)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (!(l & OMAP_TIMER_CTRL_ST)) {
l |= OMAP_TIMER_CTRL_ST;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+
+ /* Save the context */
+ timer->context.tclr = l;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- rate = clk_get_rate(timer->fclk);
-#endif
+ if (unlikely(!timer))
+ return -EINVAL;
- __omap_dm_timer_stop(timer->io_base, timer->posted, rate);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
+ if (!pdata->needs_manual_reset)
+ rate = clk_get_rate(timer->fclk);
-#ifdef CONFIG_ARCH_OMAP1
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
- int n = (timer - dm_timers) << 1;
- u32 l;
-
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
+ __omap_dm_timer_stop(timer, timer->posted, rate);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-
-#else
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ pdata = timer->pdev->dev.platform_data;
+
if (source < 0 || source >= 3)
return -EINVAL;
- return __omap_dm_timer_set_source(timer->fclk,
- dm_source_clocks[source]);
+ ret = pdata->set_timer_src(timer->pdev, source);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-#endif
-
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload)
l |= OMAP_TIMER_CTRL_AR;
@@ -448,15 +397,32 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload) {
l |= OMAP_TIMER_CTRL_AR;
@@ -466,15 +432,25 @@
}
l |= OMAP_TIMER_CTRL_ST;
- __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
+ __omap_dm_timer_load_start(timer, l, load, timer->posted);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ timer->context.tcrr = load;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (enable)
l |= OMAP_TIMER_CTRL_CE;
@@ -482,14 +458,24 @@
l &= ~OMAP_TIMER_CTRL_CE;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tmar = match;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
OMAP_TIMER_CTRL_PT | (0x03 << 10));
@@ -499,13 +485,22 @@
l |= OMAP_TIMER_CTRL_PT;
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
if (prescaler >= 0x00 && prescaler <= 0x07) {
@@ -513,13 +508,28 @@
l |= prescaler << 2;
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_int_enable(timer->io_base, value);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ __omap_dm_timer_int_enable(timer, value);
+
+ /* Save the context */
+ timer->context.tier = value;
+ timer->context.twer = value;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
@@ -527,40 +537,61 @@
{
unsigned int l;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = __raw_readl(timer->irq_stat);
return l;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- __omap_dm_timer_write_status(timer->io_base, value);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+ /* Save the context */
+ timer->context.tisr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
- int i;
+ struct omap_dm_timer *timer;
- for (i = 0; i < dm_timer_count; i++) {
- struct omap_dm_timer *timer;
-
- timer = &dm_timers[i];
-
- if (!timer->enabled)
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ if (!timer->reserved)
continue;
if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
@@ -572,69 +603,147 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-static int __init omap_dm_timer_init(void)
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
+ int ret;
+ unsigned long flags;
struct omap_dm_timer *timer;
- int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+ struct resource *mem, *irq, *ioarea;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
return -ENODEV;
-
- spin_lock_init(&dm_timer_lock);
-
- if (cpu_class_is_omap1()) {
- dm_timers = omap1_dm_timers;
- dm_timer_count = omap1_dm_timer_count;
- map_size = SZ_2K;
- } else if (cpu_is_omap24xx()) {
- dm_timers = omap2_dm_timers;
- dm_timer_count = omap2_dm_timer_count;
- dm_source_names = omap2_dm_source_names;
- dm_source_clocks = omap2_dm_source_clocks;
- } else if (cpu_is_omap34xx()) {
- dm_timers = omap3_dm_timers;
- dm_timer_count = omap3_dm_timer_count;
- dm_source_names = omap3_dm_source_names;
- dm_source_clocks = omap3_dm_source_clocks;
- } else if (cpu_is_omap44xx()) {
- dm_timers = omap4_dm_timers;
- dm_timer_count = omap4_dm_timer_count;
- dm_source_names = omap4_dm_source_names;
- dm_source_clocks = omap4_dm_source_clocks;
}
- if (cpu_class_is_omap2())
- for (i = 0; dm_source_names[i] != NULL; i++)
- dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
-
- if (cpu_is_omap243x())
- dm_timers[0].phys_base = 0x49018000;
-
- for (i = 0; i < dm_timer_count; i++) {
- timer = &dm_timers[i];
-
- /* Static mapping, never released */
- timer->io_base = ioremap(timer->phys_base, map_size);
- BUG_ON(!timer->io_base);
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- char clk_name[16];
- sprintf(clk_name, "gpt%d_ick", i + 1);
- timer->iclk = clk_get(NULL, clk_name);
- sprintf(clk_name, "gpt%d_fck", i + 1);
- timer->fclk = clk_get(NULL, clk_name);
- }
-
- /* One or two timers may be set up early for sys_timer */
- if (sys_timer_reserved & (1 << i)) {
- timer->reserved = 1;
- timer->posted = 1;
- }
-#endif
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!irq)) {
+ dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ return -ENODEV;
}
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!mem)) {
+ dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+ return -EBUSY;
+ }
+
+ timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ if (!timer) {
+ dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_ioregion;
+ }
+
+ timer->io_base = ioremap(mem->start, resource_size(mem));
+ if (!timer->io_base) {
+ dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ timer->id = pdev->id;
+ timer->irq = irq->start;
+ timer->reserved = pdata->reserved;
+ timer->pdev = pdev;
+ timer->loses_context = pdata->loses_context;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+
+ /* Skip pm_runtime_enable for OMAP1 */
+ if (!pdata->needs_manual_reset) {
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+ }
+
+ if (!timer->reserved) {
+ pm_runtime_get_sync(&pdev->dev);
+ __omap_dm_timer_init_regs(timer);
+ pm_runtime_put(&pdev->dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(&pdev->dev, "Device Probed.\n");
+
return 0;
+
+err_free_mem:
+ kfree(timer);
+
+err_free_ioregion:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return ret;
}
-arch_initcall(omap_dm_timer_init);
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct omap_dm_timer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (timer->pdev->id == pdev->id) {
+ list_del(&timer->node);
+ kfree(timer);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove = omap_dm_timer_remove,
+ .driver = {
+ .name = "omap_timer",
+ },
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+ return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+ platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3341ca4..c20beb8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -123,19 +123,11 @@
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
-static struct omap_device_pm_latency omap_i2c_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
struct omap_i2c_bus_platform_data *pdata;
@@ -160,12 +152,12 @@
*/
if (cpu_is_omap34xx())
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- od = omap_device_build(name, bus_id, oh, pdata,
+ pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
- omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
- WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index df4b968..197ca03 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -80,8 +80,6 @@
*
* @div is the divisor that should be applied to the parent clock's rate
* to produce the current clock's rate.
- *
- * XXX @flags probably should be replaced with an struct omap_chip.
*/
struct clksel_rate {
u32 val;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..abda2c7 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -45,6 +45,15 @@
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -74,7 +83,11 @@
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap242x_map_io(void);
+void omap243x_map_io(void);
void omap3_map_io(void);
+void omap4_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67b3d75..2f90269 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -44,13 +44,6 @@
int omap_type(void);
-struct omap_chip_id {
- u16 oc;
- u8 type;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
@@ -60,19 +53,6 @@
unsigned int omap_rev(void);
/*
- * Define CPU revision bits
- *
- * Verbose meaning of the revision bits may be different for a silicon
- * family. This difference can be handled separately.
- */
-#define OMAP_REVBITS_00 0x00
-#define OMAP_REVBITS_01 0x01
-#define OMAP_REVBITS_02 0x02
-#define OMAP_REVBITS_03 0x03
-#define OMAP_REVBITS_04 0x04
-#define OMAP_REVBITS_05 0x05
-
-/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
@@ -262,7 +242,7 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
@@ -354,8 +334,9 @@
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti816x() is_ti816x()
@@ -379,35 +360,31 @@
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
#define OMAP243X_CLASS 0x24300024
#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
#define OMAP363X_CLASS 0x36300034
#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -418,61 +395,6 @@
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
-#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP3630ES1 (1 << 7)
-#define CHIP_IS_OMAP4430ES1 (1 << 8)
-#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
-#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
-#define CHIP_IS_OMAP4430ES2 (1 << 11)
-#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
-#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
-#define CHIP_IS_TI816X (1 << 14)
-#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2 | \
- CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2 | \
- CHIP_IS_OMAP4460ES1_0)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
- CHIP_IS_OMAP3430ES3_0 | \
- CHIP_GE_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1 | \
- CHIP_GE_OMAP3630ES1_1)
-#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
- CHIP_IS_OMAP3630ES1_2)
-
-int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
/*
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index eb5d16c..d11025e 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dmtimer.h
+ * arch/arm/plat-omap/include/plat/dmtimer.h
*
* OMAP Dual-Mode Timers
*
@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
@@ -59,12 +60,56 @@
* in OMAP4 can be distinguished.
*/
#define OMAP_TIMER_IP_VERSION_1 0x1
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE 0x80000000
+#define OMAP_TIMER_ALWON 0x40000000
+#define OMAP_TIMER_HAS_PWM 0x20000000
+
+struct omap_timer_capability_dev_attr {
+ u32 timer_capability;
+};
+
struct omap_dm_timer;
struct clk;
+struct timer_regs {
+ u32 tidr;
+ u32 tiocp_cfg;
+ u32 tistat;
+ u32 tisr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer_platform_data {
+ int (*set_timer_src)(struct platform_device *pdev, int source);
+ int timer_ip_version;
+ u32 needs_manual_reset:1;
+ bool reserved;
+
+ bool loses_context;
+
+ u32 (*get_context_loss_count)(struct device *dev);
+};
+
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
@@ -73,23 +118,23 @@
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
@@ -98,12 +143,30 @@
* used by dmtimer.c and sys_timer related code.
*/
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET 0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
-#define _OMAP_TIMER_STAT_OFFSET 0x18
-#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET 0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET 0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14
+#define OMAP_TIMER_V1_STAT_OFFSET 0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24
+#define OMAP_TIMER_V2_IRQSTATUS 0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET 0x14
+
#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
#define _OMAP_TIMER_CTRL_OFFSET 0x24
#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
@@ -147,21 +210,6 @@
/* register offsets with the write pending bit encoded */
#define WPSHIFT 16
-#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
| (WP_NONE << WPSHIFT))
@@ -209,49 +257,88 @@
struct omap_dm_timer {
unsigned long phys_base;
+ int id;
int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
-#endif
- void __iomem *io_base;
+
+ void __iomem *io_base;
+ void __iomem *sys_stat; /* TISTAT timer status */
+ void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
+ void __iomem *irq_ena; /* irq enable */
+ void __iomem *irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
unsigned long rate;
unsigned reserved:1;
- unsigned enabled:1;
unsigned posted:1;
+ struct timer_regs context;
+ bool loses_context;
+ int ctx_loss_count;
+ int revision;
+ struct platform_device *pdev;
+ struct list_head node;
+
+ u32 (*get_context_loss_count)(struct device *dev);
};
-extern u32 sys_timer_reserved;
-void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- return __raw_readl(base + (reg & 0xff));
+ return __raw_readl(timer->func_base + (reg & 0xff));
}
-static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
- int posted)
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- __raw_writel(val, base + (reg & 0xff));
+ __raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = __raw_readl(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->sys_stat = timer->io_base +
+ OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = 0;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->sys_stat = 0;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
}
/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
- int wakeup)
+static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
+ int autoidle, int wakeup)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+ l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
l |= 0x02 << 3; /* Set to smart-idle mode */
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
@@ -261,10 +348,10 @@
if (wakeup)
l |= 1 << 2;
- __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+ __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
/* Match hardware reset default of posted mode */
- __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
}
@@ -286,18 +373,18 @@
return ret;
}
-static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
- unsigned long rate)
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
- __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
/*
* Wait for functional clock period x 3.5 to make sure that
* timer is stopped
@@ -307,34 +394,34 @@
}
/* Ack possibly pending interrupt */
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW, 0);
+ __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
}
-static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
- unsigned int load, int posted)
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+ u32 ctrl, unsigned int load,
+ int posted)
{
- __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
}
-static inline void __omap_dm_timer_int_enable(void __iomem *base,
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
- __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+ __raw_writel(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
}
-static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
- int posted)
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
{
- return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
}
-static inline void __omap_dm_timer_write_status(void __iomem *base,
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+ __raw_writel(value, timer->irq_stat);
}
#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85..7471521 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -228,13 +228,13 @@
#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
@@ -300,7 +300,7 @@
#endif
extern void omap2_init_common_infrastructure(void);
-extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
@@ -309,6 +309,8 @@
void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
void omap_iounmap(volatile void __iomem *addr);
+extern void __init omap_init_consistent_dma_size(void);
+
#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8fa74e2 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -25,9 +25,7 @@
#define __ASM_ARCH_OMAP_MCBSP_H
#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <plat/clock.h>
+#include <linux/clk.h>
/* macro for building platform_device for McBSP ports */
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
@@ -40,104 +38,60 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-#define OMAP7XX_MCBSP1_BASE 0xfffb1000
-#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
-
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +100,6 @@
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -344,20 +296,20 @@
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*set_clks_src)(u8, u8);
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
@@ -389,14 +341,12 @@
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
-#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
+ int reg_cache_size;
};
/**
@@ -408,16 +358,10 @@
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count, omap_mcbsp_cache_size;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -426,18 +370,6 @@
u16 omap_mcbsp_get_tx_delay(unsigned int id);
u16 omap_mcbsp_get_rx_delay(unsigned int id);
int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
@@ -453,21 +385,11 @@
int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
int omap_st_enable(unsigned int id);
int omap_st_disable(unsigned int id);
int omap_st_is_enabled(unsigned int id);
-#else
-static inline int omap_st_set_chgain(unsigned int id, int channel,
- s16 chgain) { return 0; }
-static inline int omap_st_get_chgain(unsigned int id, int channel,
- s16 *chgain) { return 0; }
-static inline int omap_st_enable(unsigned int id) { return 0; }
-static inline int omap_st_disable(unsigned int id) { return 0; }
-static inline int omap_st_is_enabled(unsigned int id) { return 0; }
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
deleted file mode 100644
index e6720aa..0000000
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET UL(0x30000000)
-
-#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn) \
- ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
- if (is_lbus_device(dev)) \
- __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
- __dma; })
-
-#define __arch_dma_to_pfn(dev, addr) \
- ({ dma_addr_t __dma = addr; \
- if (is_lbus_device(dev)) \
- __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
- __phys_to_pfn(__dma); \
- })
-
-#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
- (dma_addr_t) (is_lbus_device(dev) ? \
- virt_to_lbus(__addr) : \
- __virt_to_phys(__addr)); })
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
- (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index ee405b36..12c5b0c 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -68,7 +68,7 @@
*
*/
struct omap_device {
- struct platform_device pdev;
+ struct platform_device *pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
@@ -88,25 +88,20 @@
/* Core code interface */
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-int omap_device_register(struct omap_device *od);
-int omap_early_device_register(struct omap_device *od);
-
void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -122,11 +117,6 @@
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
-static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
-{
- od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
/*
* Entries should be kept in latency order ascending
*
@@ -157,6 +147,17 @@
#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
-#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..5419f1a 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -496,7 +496,6 @@
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
@@ -526,7 +525,6 @@
char *clkdm_name;
struct clockdomain *clkdm;
char *vdd_name;
- struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
@@ -545,7 +543,6 @@
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
- const struct omap_chip_id omap_chip;
};
int omap_hwmod_register(struct omap_hwmod **ohs);
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..1ab9fd6 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -16,8 +16,8 @@
#include <linux/init.h>
/*
- * Memory entry used for the DEBUG_LL UART configuration. See also
- * uncompress.h and debug-macro.S.
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
@@ -27,7 +27,7 @@
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
-#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index a067484..2f472e9 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -36,7 +36,13 @@
*/
static void set_omap_uart_info(unsigned char port)
{
- *(volatile u32 *)OMAP_UART_INFO = port;
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
}
static void putc(int c)
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 0000000..0a6a482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,20 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+
+#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9..e9b0e23 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <plat/omap7xx.h>
#include <plat/omap1510.h>
@@ -139,3 +140,10 @@
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 6c62af1..4b15cd7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,45 +24,40 @@
#include <linux/slab.h>
#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-/* XXX These "sideways" includes are a sign that something is wrong */
-#include "../mach-omap2/cm2xxx_3xxx.h"
-#include "../mach-omap2/cm-regbits-34xx.h"
-
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count, omap_mcbsp_cache_size;
+int omap_mcbsp_count;
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
-#ifdef CONFIG_ARCH_OMAP3
static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
__raw_writel(val, mcbsp->st_data->io_base_st + reg);
@@ -72,7 +67,6 @@
{
return __raw_readl(mcbsp->st_data->io_base_st + reg);
}
-#endif
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
@@ -187,7 +181,7 @@
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
@@ -239,46 +233,28 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_device *find_omap_device_by_dev(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- return container_of(pdev, struct omap_device, pdev);
-}
-
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w &= ~(1 << (mcbsp->id - 2));
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
/* Enable McBSP Sidetone */
w = MCBSP_READ(mcbsp, SSELCR);
@@ -292,9 +268,6 @@
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
@@ -302,17 +275,13 @@
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w |= 1 << (mcbsp->id - 2);
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -340,9 +309,6 @@
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -525,14 +491,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_tx_thres)
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
@@ -548,14 +513,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_rx_thres)
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
@@ -625,6 +589,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of free locations in the buffer */
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
@@ -648,6 +614,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of used locations in the buffer */
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
@@ -683,46 +651,6 @@
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
-#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
-#endif
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
@@ -735,7 +663,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
if (!reg_cache) {
return -ENOMEM;
}
@@ -757,8 +685,9 @@
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -795,8 +724,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -825,8 +755,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -866,7 +797,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_start(mcbsp);
/* Only enable SRG, if McBSP is master */
@@ -904,7 +835,7 @@
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
/* Release the transmitter and receiver */
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
@@ -934,7 +865,7 @@
/* Reset transmitter */
tx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
MCBSP_WRITE(mcbsp, XCCR, w);
@@ -944,7 +875,7 @@
/* Reset receiver */
rx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
MCBSP_WRITE(mcbsp, RCCR, w);
@@ -961,39 +892,72 @@
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/*
- * The following functions are only required on an OMAP1-only build.
- * mach-omap2/mcbsp.c contains the real functions
- */
-#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return -EINVAL;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+ return -EINVAL;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ src = "clks_ext";
+ else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ src = "clks_fclk";
+ else
+ return -EINVAL;
+
+ if (mcbsp->pdata->set_clk_src)
+ return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
+ else
+ return -EINVAL;
}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (mux == CLKR_SRC_CLKR)
+ src = "clkr";
+ else if (mux == CLKR_SRC_CLKX)
+ src = "clkx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
-}
-#endif
+ struct omap_mcbsp *mcbsp;
+ const char *src;
-#ifdef CONFIG_ARCH_OMAP3
+ if (mux == FSR_SRC_FSR)
+ src = "fsr";
+ else if (mux == FSR_SRC_FSX)
+ src = "fsx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1084,6 +1048,17 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
static ssize_t st_taps_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1142,27 +1117,6 @@
static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static inline int __devinit omap_additional_add(struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &additional_attr_group);
-}
-
-static inline void __devexit omap_additional_remove(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &additional_attr_group);
-}
-
static const struct attribute *sidetone_attrs[] = {
&dev_attr_st_taps.attr,
NULL,
@@ -1172,10 +1126,9 @@
.attrs = (struct attribute **)sidetone_attrs,
};
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
+ struct resource *res)
{
- struct platform_device *pdev;
- struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1185,9 +1138,6 @@
goto err1;
}
- pdev = container_of(mcbsp->dev, struct platform_device, dev);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
@@ -1214,60 +1164,11 @@
{
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- if (st_data) {
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
- }
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
}
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
-{
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (cpu_is_omap34xx()) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
- /*
- * REVISIT: Set dmap_op_mode to THRESHOLD as default
- * for mcbsp2 instances.
- */
- if (omap_additional_add(mcbsp->dev))
- dev_warn(mcbsp->dev,
- "Unable to create additional controls\n");
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- if (omap_st_add(mcbsp))
- dev_warn(mcbsp->dev,
- "Unable to create sidetone controls\n");
-
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-}
-
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
-{
- if (cpu_is_omap34xx()) {
- omap_additional_remove(mcbsp->dev);
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- omap_st_remove(mcbsp);
- }
-}
-#else
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1316,7 +1217,7 @@
}
}
mcbsp->phys_base = res->start;
- omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->reg_cache_size = resource_size(res);
mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
@@ -1364,15 +1265,52 @@
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
- /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
- omap34xx_device_init(mcbsp);
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (mcbsp->pdata->buffer_size) {
+ /*
+ * Initially configure the maximum thresholds to a safe value.
+ * The McBSP FIFO usage with these values should not go under
+ * 16 locations.
+ * If the whole FIFO without safety buffer is used, than there
+ * is a possibility that the DMA will be not able to push the
+ * new data on time, causing channel shifts in runtime.
+ */
+ mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+ mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+ ret = sysfs_create_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create additional controls\n");
+ goto err_thres;
+ }
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ if (res) {
+ ret = omap_st_add(mcbsp, res);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+ goto err_st;
+ }
+ }
return 0;
+err_st:
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+err_thres:
+ clk_put(mcbsp->fclk);
err_res:
iounmap(mcbsp->io_base);
err_ioremap:
@@ -1392,7 +1330,12 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap34xx_device_exit(mcbsp);
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+
+ if (mcbsp->st_data)
+ omap_st_remove(mcbsp);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 02609ee..cd90bed 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -85,6 +85,8 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -94,6 +96,23 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
+static int omap_device_register(struct platform_device *pdev);
+static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+static void omap_device_delete(struct omap_device *od);
+
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
+
/* Private functions */
/**
@@ -114,7 +133,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +157,24 @@
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +201,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +224,26 @@
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +261,27 @@
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
- r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
- l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
@@ -304,6 +319,96 @@
}
+static struct dev_pm_domain omap_device_pm_domain;
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
/* Public functions for use by core code */
/**
@@ -343,7 +448,7 @@
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
-int omap_device_count_resources(struct omap_device *od)
+static int omap_device_count_resources(struct omap_device *od)
{
int c = 0;
int i;
@@ -352,7 +457,7 @@
c += omap_hwmod_count_resources(od->hwmods[i]);
pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -374,7 +479,8 @@
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
-int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
{
int c = 0;
int i, r;
@@ -389,6 +495,113 @@
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -405,7 +618,7 @@
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -438,18 +651,15 @@
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
+ struct platform_device *pdev;
struct omap_device *od;
- char *pdev_name2;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -457,72 +667,40 @@
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
if (!od)
- return ERR_PTR(-ENOMEM);
-
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
goto odbs_exit1;
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
-
- pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
- if (!pdev_name2)
- goto odbs_exit2;
- strcpy(pdev_name2, pdev_name);
-
- od->pdev.name = pdev_name2;
- od->pdev.id = pdev_id;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
- }
- omap_device_fill_resources(od, res);
-
- od->pdev.num_resources = res_count;
- od->pdev.resource = res;
-
- ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit4;
-
- od->pm_lats = pm_lats;
- od->pm_lats_cnt = pm_lats_cnt;
+ goto odbs_exit2;
if (is_early_device)
- ret = omap_early_device_register(od);
+ ret = omap_early_device_register(pdev);
else
- ret = omap_device_register(od);
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
-
+ ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit4;
+ goto odbs_exit2;
- return od;
+ return pdev;
-odbs_exit4:
- kfree(res);
-odbs_exit3:
- kfree(pdev_name2);
odbs_exit2:
- kfree(hwmods);
+ omap_device_delete(od);
odbs_exit1:
- kfree(od);
+ platform_device_put(pdev);
+odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
@@ -538,11 +716,11 @@
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-int omap_early_device_register(struct omap_device *od)
+static int omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
- devices[0] = &(od->pdev);
+ devices[0] = pdev;
early_platform_add_devices(devices, 1);
return 0;
}
@@ -638,13 +816,13 @@
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-int omap_device_register(struct omap_device *od)
+static int omap_device_register(struct platform_device *pdev)
{
- pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ pr_debug("omap_device: %s: registering\n", pdev->name);
- od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pm_domain = &omap_device_pm_domain;
- return platform_device_register(&od->pdev);
+ pdev->dev.parent = &omap_device_parent;
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
}
@@ -671,8 +849,9 @@
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -710,8 +889,9 @@
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -742,8 +922,9 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -837,6 +1018,42 @@
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
@@ -917,8 +1134,13 @@
.parent = &platform_bus,
};
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
static int __init omap_device_init(void)
{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f88216d..c65eb79 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -163,9 +163,9 @@
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p_gpioint_set_type,
- ct->regs.ack = PEND_OFFSET + REG_OFFSET(chip->group);
- ct->regs.mask = MASK_OFFSET + REG_OFFSET(chip->group);
- ct->regs.type = CON_OFFSET + REG_OFFSET(chip->group);
+ ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
+ ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf..02b160a 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
#include <linux/amba/serial.h>
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
deleted file mode 100644
index 7e3599e..0000000
--- a/arch/arm/plat-spear/include/plat/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/memory.h
- *
- * Memory map for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MEMORY_H
-#define __PLAT_MEMORY_H
-
-/* Physical DRAM offset */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f73..cf17d04 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
moveq \rp, #0x90000000 @ physical base address
movne \rv, #0xF1000000 @ virtual base
orr \rp, \rp, #0x00007000 @ UART0
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
deleted file mode 100644
index 28a6e0c..0000000
--- a/arch/arm/plat-tcc/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 79bcb43..0cbd5a0 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/signal.h>
@@ -68,7 +69,7 @@
/*
* Force a reload of the VFP context from the thread structure. We do
* this by ensuring that access to the VFP hardware is disabled, and
- * clear last_VFP_context. Must be called from non-preemptible context.
+ * clear vfp_current_hw_state. Must be called from non-preemptible context.
*/
static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
{
@@ -436,9 +437,7 @@
set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
}
-#ifdef CONFIG_PM
-#include <linux/syscore_ops.h>
-
+#ifdef CONFIG_CPU_PM
static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
@@ -468,19 +467,33 @@
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
}
-static struct syscore_ops vfp_pm_syscore_ops = {
- .suspend = vfp_pm_suspend,
- .resume = vfp_pm_resume,
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+ void *v)
+{
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ vfp_pm_suspend();
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ vfp_pm_resume();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+ .notifier_call = vfp_cpu_pm_notifier,
};
static void vfp_pm_init(void)
{
- register_syscore_ops(&vfp_pm_syscore_ops);
+ cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
}
#else
static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_CPU_PM */
/*
* Ensure that the VFP state stored in 'thread->vfpstate' is up to date
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 177cdaf..b122adc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_ARCH_JUMP_LABEL
+ select IRQ_FORCED_THREADING
menu "Machine selection"
@@ -722,6 +723,7 @@
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_CPU_CAVIUM_OCTEON
+ select HOLES_IN_ZONE
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
@@ -744,6 +746,7 @@
select ZONE_DMA32
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ select HOLES_IN_ZONE
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
@@ -973,6 +976,9 @@
config GENERIC_GPIO
bool
+config HOLES_IN_ZONE
+ bool
+
#
# Endianess selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 3b2c18b..f72c48d 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -492,7 +492,7 @@
memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
ret = platform_device_register(&au1xxx_eth0_device);
- if (!ret)
+ if (ret)
printk(KERN_INFO "Alchemy: failed to register MAC0\n");
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 647e518..b86324a 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -158,15 +158,21 @@
void au_sleep(void)
{
- int cpuid = alchemy_get_cputype();
- if (cpuid != ALCHEMY_CPU_UNKNOWN) {
- save_core_regs();
- if (cpuid <= ALCHEMY_CPU_AU1500)
- alchemy_sleep_au1000();
- else if (cpuid <= ALCHEMY_CPU_AU1200)
- alchemy_sleep_au1550();
- restore_core_regs();
+ save_core_regs();
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ alchemy_sleep_au1000();
+ break;
+ case ALCHEMY_CPU_AU1550:
+ case ALCHEMY_CPU_AU1200:
+ alchemy_sleep_au1550();
+ break;
}
+
+ restore_core_regs();
}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index 596ad00..463d2c4 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -89,8 +89,12 @@
{
unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
+ disable_irq_nosync(irq);
+
for ( ; bisr; bisr &= bisr - 1)
generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+
+ enable_irq(irq);
}
/* NOTE: both the enable and mask bits must be cleared, otherwise the
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 1dac4f2..4a89800 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -23,13 +23,6 @@
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
- /* Set Config[OD] (disable overlapping bus transaction):
- * This gets rid of a _lot_ of spurious interrupts (especially
- * wrt. IDE); but incurs ~10% performance hit in some
- * cpu-bound applications.
- */
- set_c0_config(1 << 19);
-
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
index 03db3da..88c4bab 100644
--- a/arch/mips/ar7/irq.c
+++ b/arch/mips/ar7/irq.c
@@ -98,7 +98,8 @@
static struct irqaction ar7_cascade_action = {
.handler = no_action,
- .name = "AR7 cascade interrupt"
+ .name = "AR7 cascade interrupt",
+ .flags = IRQF_NO_THREAD,
};
static void __init ar7_irq_init(int base)
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index cea6021c..162e11b 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -222,6 +222,7 @@
static struct irqaction cpu_ip2_cascade_action = {
.handler = no_action,
.name = "cascade_ip2",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index cb9bf82..965c777 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -48,6 +48,7 @@
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index fa45e92..f7b7ba6 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -101,20 +101,24 @@
static struct irqaction ioirq = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction fpuirq = {
.handler = no_action,
.name = "fpu",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction busirq = {
.flags = IRQF_DISABLED,
.name = "bus error",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction haltirq = {
.handler = dec_intr_halt,
.name = "halt",
+ .flags = IRQF_NO_THREAD,
};
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 3dbd7a5..7798887 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -169,7 +169,7 @@
static struct irqaction irq_cascade = {
.handler = no_action,
- .flags = 0,
+ .flags = IRQF_NO_THREAD,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 0d5a42b..a58addb 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -54,7 +54,6 @@
#define cpu_has_mips_r2_exec_hazard 0
#define cpu_has_dsp 0
#define cpu_has_mipsmt 0
-#define cpu_has_userlocal 0
#define cpu_has_vint 0
#define cpu_has_veic 0
#define cpu_hwrena_impl_bits 0xc0000000
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
index 62c0940..3537164 100644
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -13,7 +13,6 @@
#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
#include <linux/sched.h>
-#include <linux/version.h>
#include <linux/device.h>
#include <asm/mach-powertv/asic.h>
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index b4ba244..cb41af5 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -195,9 +195,9 @@
* to cover the pipeline delay.
*/
.set mips32
- mfc0 v1, CP0_TCSTATUS
+ mfc0 k0, CP0_TCSTATUS
.set mips0
- LONG_S v1, PT_TCSTATUS(sp)
+ LONG_S k0, PT_TCSTATUS(sp)
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
LONG_S $5, PT_R5(sp)
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 73031f7..4397972 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -86,7 +86,6 @@
spinlock_t lock;
struct gpio_chip gpio_chip;
- struct sys_device sysdev;
};
static struct jz_gpio_chip jz4740_gpio_chips[];
@@ -459,49 +458,47 @@
JZ4740_GPIO_CHIP(D),
};
-static inline struct jz_gpio_chip *sysdev_to_chip(struct sys_device *dev)
+static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
{
- return container_of(dev, struct jz_gpio_chip, sysdev);
-}
-
-static int jz4740_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct jz_gpio_chip *chip = sysdev_to_chip(dev);
-
chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
+}
+
+static int jz4740_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
+ jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
return 0;
}
-static int jz4740_gpio_resume(struct sys_device *dev)
+static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
{
- struct jz_gpio_chip *chip = sysdev_to_chip(dev);
uint32_t mask = chip->suspend_mask;
writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-
- return 0;
}
-static struct sysdev_class jz4740_gpio_sysdev_class = {
- .name = "gpio",
+static void jz4740_gpio_resume(void)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
+ jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
+}
+
+static struct syscore_ops jz4740_gpio_syscore_ops = {
.suspend = jz4740_gpio_suspend,
.resume = jz4740_gpio_resume,
};
-static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
+static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
{
- int ret, irq;
-
- chip->sysdev.id = id;
- chip->sysdev.cls = &jz4740_gpio_sysdev_class;
- ret = sysdev_register(&chip->sysdev);
-
- if (ret)
- return ret;
+ int irq;
spin_lock_init(&chip->lock);
@@ -519,22 +516,17 @@
irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
handle_level_irq);
}
-
- return 0;
}
static int __init jz4740_gpio_init(void)
{
unsigned int i;
- int ret;
-
- ret = sysdev_class_register(&jz4740_gpio_sysdev_class);
- if (ret)
- return ret;
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
+ register_syscore_ops(&jz4740_gpio_syscore_ops);
+
printk(KERN_INFO "JZ4740 GPIO initialized\n");
return 0;
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index feb8021..6a2d758 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -19,6 +19,26 @@
#include <asm-generic/sections.h>
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+#define MCOUNT_OFFSET_INSNS 5
+#else
+#define MCOUNT_OFFSET_INSNS 4
+#endif
+
+/*
+ * Check if the address is in kernel space
+ *
+ * Clone core_kernel_text() from kernel/extable.c, but doesn't call
+ * init_kernel_text() for Ftrace doesn't trace functions in init sections.
+ */
+static inline int in_kernel_space(unsigned long ip)
+{
+ if (ip >= (unsigned long)_stext &&
+ ip <= (unsigned long)_etext)
+ return 1;
+ return 0;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
@@ -54,20 +74,6 @@
#endif
}
-/*
- * Check if the address is in kernel space
- *
- * Clone core_kernel_text() from kernel/extable.c, but doesn't call
- * init_kernel_text() for Ftrace doesn't trace functions in init sections.
- */
-static inline int in_kernel_space(unsigned long ip)
-{
- if (ip >= (unsigned long)_stext &&
- ip <= (unsigned long)_etext)
- return 1;
- return 0;
-}
-
static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
{
int faulted;
@@ -112,11 +118,6 @@
* 1: offset = 4 instructions
*/
-#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
-#define MCOUNT_OFFSET_INSNS 5
-#else
-#define MCOUNT_OFFSET_INSNS 4
-#endif
#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
int ftrace_make_nop(struct module *mod,
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 5c74eb7..32b397b 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -229,7 +229,7 @@
*/
if (i8259A_auto_eoi >= 0) {
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
}
}
@@ -295,6 +295,7 @@
static struct irqaction irq2 = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct resource pic1_io_resource = {
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 876a75c..922a554 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -349,3 +349,10 @@
return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
dfd, pathname);
}
+
+SYSCALL_DEFINE6(32_futex, u32 __user *, uaddr, int, op, u32, val,
+ struct compat_timespec __user *, utime, u32 __user *, uaddr2,
+ u32, val3)
+{
+ return compat_sys_futex(uaddr, op, val, utime, uaddr2, val3);
+}
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index f9296e8..6de1f59 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -315,7 +315,7 @@
PTR sys_fremovexattr
PTR sys_tkill
PTR sys_ni_syscall
- PTR compat_sys_futex
+ PTR sys_32_futex
PTR compat_sys_sched_setaffinity /* 6195 */
PTR compat_sys_sched_getaffinity
PTR sys_cacheflush
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 4d7c982..1d81316 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -441,7 +441,7 @@
PTR sys_fremovexattr /* 4235 */
PTR sys_tkill
PTR sys_sendfile64
- PTR compat_sys_futex
+ PTR sys_32_futex
PTR compat_sys_sched_setaffinity
PTR compat_sys_sched_getaffinity /* 4240 */
PTR compat_sys_io_setup
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index dbbe0ce..f852400 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/cache.h>
+#include <linux/irqflags.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/personality.h>
@@ -658,6 +659,8 @@
asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
__u32 thread_info_flags)
{
+ local_irq_enable();
+
/* deal with pending signal delivery */
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b7517e3..cbea618 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -14,6 +14,7 @@
#include <linux/bug.h>
#include <linux/compiler.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -364,21 +365,26 @@
return (regs->cp0_cause >> 2) & 0x1f;
}
-static DEFINE_SPINLOCK(die_lock);
+static DEFINE_RAW_SPINLOCK(die_lock);
void __noreturn die(const char *str, struct pt_regs *regs)
{
static int die_counter;
int sig = SIGSEGV;
#ifdef CONFIG_MIPS_MT_SMTC
- unsigned long dvpret = dvpe();
+ unsigned long dvpret;
#endif /* CONFIG_MIPS_MT_SMTC */
+ oops_enter();
+
if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
sig = 0;
console_verbose();
- spin_lock_irq(&die_lock);
+ raw_spin_lock_irq(&die_lock);
+#ifdef CONFIG_MIPS_MT_SMTC
+ dvpret = dvpe();
+#endif /* CONFIG_MIPS_MT_SMTC */
bust_spinlocks(1);
#ifdef CONFIG_MIPS_MT_SMTC
mips_mt_regdump(dvpret);
@@ -387,7 +393,9 @@
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
- spin_unlock_irq(&die_lock);
+ raw_spin_unlock_irq(&die_lock);
+
+ oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 2cd50ad..3efcb06 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -192,7 +192,7 @@
}
spin_unlock(&vpecontrol.tc_list_lock);
- return NULL;
+ return res;
}
/* allocate a vpe and associate it with this minor (or index) */
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index fc89795..f9737bb 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -123,11 +123,10 @@
static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
{
int i;
- int irq_nr = d->irq - INT_NUM_IRQ0;
ltq_enable_irq(d);
for (i = 0; i < MAX_EIU; i++) {
- if (irq_nr == ltq_eiu_irq[i]) {
+ if (d->irq == ltq_eiu_irq[i]) {
/* low level - we should really handle set_type */
ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
@@ -147,11 +146,10 @@
static void ltq_shutdown_eiu_irq(struct irq_data *d)
{
int i;
- int irq_nr = d->irq - INT_NUM_IRQ0;
ltq_disable_irq(d);
for (i = 0; i < MAX_EIU; i++) {
- if (irq_nr == ltq_eiu_irq[i]) {
+ if (d->irq == ltq_eiu_irq[i]) {
/* disable */
ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i),
LTQ_EIU_EXIN_INEN);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
index 66eb52f..033b318 100644
--- a/arch/mips/lantiq/xway/ebu.c
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/ioport.h>
#include <lantiq_soc.h>
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
index 9d69f01e..39f0d26 100644
--- a/arch/mips/lantiq/xway/pmu.c
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -8,7 +8,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/ioport.h>
#include <lantiq_soc.h>
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index de4c165..d608b6e 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -105,6 +105,7 @@
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index d61a042..3cf1fef 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -42,6 +42,7 @@
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 081db10..14b0818 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -96,12 +96,13 @@
struct irqaction ip6_irqaction = {
.handler = ip6_action,
.name = "cascade",
- .flags = IRQF_SHARED,
+ .flags = IRQF_SHARED | IRQF_NO_THREAD,
};
struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 9ff5d0f..302d779 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -6,6 +6,7 @@
* Copyright (C) 2011 Wind River Systems,
* written by Ralf Baechle <ralf@linux-mips.org>
*/
+#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/mman.h>
@@ -15,12 +16,11 @@
#include <linux/sched.h>
unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
-
EXPORT_SYMBOL(shm_align_mask);
/* gap between mmap and stack */
#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
+#define MAX_GAP ((TASK_SIZE)/6*5)
static int mmap_is_legacy(void)
{
@@ -57,13 +57,13 @@
return base - off;
}
-#define COLOUR_ALIGN(addr,pgoff) \
+#define COLOUR_ALIGN(addr, pgoff) \
((((addr) + shm_align_mask) & ~shm_align_mask) + \
(((pgoff) << PAGE_SHIFT) & shm_align_mask))
enum mmap_allocation_direction {UP, DOWN};
-static unsigned long arch_get_unmapped_area_foo(struct file *filp,
+static unsigned long arch_get_unmapped_area_common(struct file *filp,
unsigned long addr0, unsigned long len, unsigned long pgoff,
unsigned long flags, enum mmap_allocation_direction dir)
{
@@ -103,16 +103,16 @@
vma = find_vma(mm, addr);
if (TASK_SIZE - len >= addr &&
- (!vma || addr + len <= vma->vm_start))
+ (!vma || addr + len <= vma->vm_start))
return addr;
}
if (dir == UP) {
addr = mm->mmap_base;
- if (do_color_align)
- addr = COLOUR_ALIGN(addr, pgoff);
- else
- addr = PAGE_ALIGN(addr);
+ if (do_color_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
/* At this point: (!vma || addr < vma->vm_end). */
@@ -131,28 +131,30 @@
mm->free_area_cache = mm->mmap_base;
}
- /* either no address requested or can't fit in requested address hole */
+ /*
+ * either no address requested, or the mapping can't fit into
+ * the requested address hole
+ */
addr = mm->free_area_cache;
- if (do_color_align) {
- unsigned long base =
- COLOUR_ALIGN_DOWN(addr - len, pgoff);
-
+ if (do_color_align) {
+ unsigned long base =
+ COLOUR_ALIGN_DOWN(addr - len, pgoff);
addr = base + len;
- }
+ }
/* make sure it can fit in the remaining address space */
if (likely(addr > len)) {
vma = find_vma(mm, addr - len);
if (!vma || addr <= vma->vm_start) {
- /* remember the address as a hint for next time */
- return mm->free_area_cache = addr-len;
+ /* cache the address as a hint for next time */
+ return mm->free_area_cache = addr - len;
}
}
if (unlikely(mm->mmap_base < len))
goto bottomup;
- addr = mm->mmap_base-len;
+ addr = mm->mmap_base - len;
if (do_color_align)
addr = COLOUR_ALIGN_DOWN(addr, pgoff);
@@ -163,8 +165,8 @@
* return with success:
*/
vma = find_vma(mm, addr);
- if (likely(!vma || addr+len <= vma->vm_start)) {
- /* remember the address as a hint for next time */
+ if (likely(!vma || addr + len <= vma->vm_start)) {
+ /* cache the address as a hint for next time */
return mm->free_area_cache = addr;
}
@@ -173,7 +175,7 @@
mm->cached_hole_size = vma->vm_start - addr;
/* try just below the current vma->vm_start */
- addr = vma->vm_start-len;
+ addr = vma->vm_start - len;
if (do_color_align)
addr = COLOUR_ALIGN_DOWN(addr, pgoff);
} while (likely(len < vma->vm_start));
@@ -201,7 +203,7 @@
unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr0,
unsigned long len, unsigned long pgoff, unsigned long flags)
{
- return arch_get_unmapped_area_foo(filp,
+ return arch_get_unmapped_area_common(filp,
addr0, len, pgoff, flags, UP);
}
@@ -213,7 +215,7 @@
unsigned long addr0, unsigned long len, unsigned long pgoff,
unsigned long flags)
{
- return arch_get_unmapped_area_foo(filp,
+ return arch_get_unmapped_area_common(filp,
addr0, len, pgoff, flags, DOWN);
}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b6e1cff..e06370f 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1759,14 +1759,13 @@
u32 *p = handle_tlbm;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
- struct work_registers wr;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r3000_tlbchange_handler_head(&p, K0, K1);
- build_pte_modifiable(&p, &r, wr.r1, wr.r2, wr.r3, label_nopage_tlbm);
+ build_pte_modifiable(&p, &r, K0, K1, -1, label_nopage_tlbm);
uasm_i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
build_r3000_pte_reload_tlbwi(&p, K0, K1);
@@ -1963,7 +1962,8 @@
uasm_i_andi(&p, wr.r3, wr.r3, 2);
uasm_il_beqz(&p, &r, wr.r3, label_tlbl_goaround2);
}
-
+ if (PM_DEFAULT_MASK == 0)
+ uasm_i_nop(&p);
/*
* We clobbered C0_PAGEMASK, restore it. On the other branch
* it is restored in build_huge_tlb_write_entry.
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 1d36c511..d53ff91 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -350,12 +350,14 @@
static struct irqaction i8259irq = {
.handler = no_action,
- .name = "XT-PIC cascade"
+ .name = "XT-PIC cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction corehi_irqaction = {
.handler = no_action,
- .name = "CoreHi"
+ .name = "CoreHi",
+ .flags = IRQF_NO_THREAD,
};
static msc_irqmap_t __initdata msc_irqmap[] = {
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index 9bd3f73..2dca585 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -2,4 +2,4 @@
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o
-EXTRA_CFLAGS += -Werror
+ccflags-y += -Werror
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 603d749..8656388 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -171,8 +171,13 @@
u32 temp_buffer;
/* set clock to 33Mhz */
- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+ if (ltq_is_ar9()) {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0x1f00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0xe00000, LTQ_CGU_IFCCR);
+ } else {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+ }
/* external or internal clock ? */
if (conf->clock) {
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 764362c..5f3a69c 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -215,7 +215,7 @@
rc32434_pcibridge_init();
io_map_base = ioremap(rc32434_res_pci_io1.start,
- resource_size(&rcrc32434_res_pci_io1));
+ resource_size(&rc32434_res_pci_io1));
if (!io_map_base)
return -ENOMEM;
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmc-sierra/msp71xx/msp_irq.c
index 4531c4a..d3c3d81 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq.c
@@ -108,12 +108,14 @@
static struct irqaction cic_cascade_msp = {
.handler = no_action,
- .name = "MSP CIC cascade"
+ .name = "MSP CIC cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct irqaction per_cascade_msp = {
.handler = no_action,
- .name = "MSP PER cascade"
+ .name = "MSP PER cascade",
+ .flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c
index 6b93c81..1ebe22b 100644
--- a/arch/mips/pnx8550/common/int.c
+++ b/arch/mips/pnx8550/common/int.c
@@ -167,7 +167,7 @@
static struct irqaction gic_action = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "GIC",
};
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index b4d08e4..f72c336 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -155,32 +155,32 @@
static struct irqaction local0_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "local0 cascade",
};
static struct irqaction local1_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "local1 cascade",
};
static struct irqaction buserr = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "Bus Error",
};
static struct irqaction map0_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
static struct irqaction map1_cascade = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_NO_THREAD,
.name = "mapable1 cascade",
};
#define SGI_INTERRUPTS SGINT_END
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index a7e5a6d..3ab5b5d 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -359,6 +359,7 @@
static struct irqaction sni_rm200_irq2 = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
static struct resource sni_rm200_pic1_resource = {
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 70a3b85..fad2bef 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -34,6 +34,7 @@
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
+ .flags = IRQF_NO_THREAD,
};
int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 1407c07..f6ae2b2 100644
--- a/arch/sparc/include/asm/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -280,7 +280,7 @@
return retval;
}
#else
-#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK)
+#define srmmu_hwprobe(addr) srmmu_swprobe(addr, 0)
#endif
static inline int
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 1e94f94..8aa0d44 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -230,7 +230,8 @@
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
- flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+ flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE
+ | IORESOURCE_SIZEALIGN;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 1ba95af..2caa556 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -273,10 +273,7 @@
case 1: set.sig[0] = seta[0] + (((long)seta[1]) << 32);
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
@@ -377,10 +374,7 @@
case 1: set.sig[0] = seta.sig[0] + (((long)seta.sig[1]) << 32);
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -782,6 +776,7 @@
siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
if (ka->sa.sa_flags & SA_SIGINFO)
@@ -792,12 +787,10 @@
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked,signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -881,7 +874,7 @@
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 04ede8f..8ce247a 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -62,12 +62,13 @@
static int _sigpause_common(old_sigset_t set)
{
- set &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
+ sigset_t blocked;
+
current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, set);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+
+ set &= _BLOCKABLE;
+ siginitset(&blocked, set);
+ set_current_blocked(&blocked);
current->state = TASK_INTERRUPTIBLE;
schedule();
@@ -139,10 +140,7 @@
goto segv_and_exit;
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv_and_exit:
@@ -209,10 +207,7 @@
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -470,6 +465,7 @@
handle_signal(unsigned long signr, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
if (ka->sa.sa_flags & SA_SIGINFO)
@@ -480,12 +476,10 @@
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked, signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -581,7 +575,7 @@
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 47509df..a2b8159 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -70,10 +70,7 @@
goto do_sigsegv;
}
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
}
if (test_thread_flag(TIF_32BIT)) {
pc &= 0xffffffff;
@@ -242,12 +239,13 @@
static long _sigpause_common(old_sigset_t set)
{
- set &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
+ sigset_t blocked;
+
current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, set);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+
+ set &= _BLOCKABLE;
+ siginitset(&blocked, set);
+ set_current_blocked(&blocked);
current->state = TASK_INTERRUPTIBLE;
schedule();
@@ -327,10 +325,7 @@
pt_regs_clear_syscall(regs);
sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
return;
segv:
force_sig(SIGSEGV, current);
@@ -484,18 +479,17 @@
siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
+ sigset_t blocked;
int err;
err = setup_rt_frame(ka, regs, signr, oldset,
(ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
if (err)
return err;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
- sigaddset(¤t->blocked,signr);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ sigaddset(&blocked, signr);
+ set_current_blocked(&blocked);
tracehook_signal_handler(signr, info, ka, regs, 0);
@@ -601,7 +595,7 @@
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ set_current_blocked(¤t->saved_sigmask);
}
}
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
index e485a68..13c2169 100644
--- a/arch/sparc/mm/leon_mm.c
+++ b/arch/sparc/mm/leon_mm.c
@@ -162,7 +162,7 @@
printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
if (paddr)
*paddr = paddr_calc;
- return paddrbase;
+ return pte;
}
void leon_flush_icache_all(void)
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index fc94607..aecc8ed 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -21,7 +21,7 @@
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/irqflags.h>
-#include <linux/atomic.h>
+#include <asm/atomic_32.h>
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
#include <arch/abi.h>
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
index 1f75a2a..3063804 100644
--- a/arch/tile/lib/atomic_asm_32.S
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -70,7 +70,7 @@
*/
#include <linux/linkage.h>
-#include <linux/atomic.h>
+#include <asm/atomic_32.h>
#include <asm/page.h>
#include <asm/processor.h>
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 18ae83d..b56c65de 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -56,7 +56,7 @@
.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
};
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
+static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE;
static int __init vsyscall_setup(char *str)
{
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 3032644..87488b9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -63,9 +63,8 @@
#ifdef CONFIG_X86_32
/* for fixmap */
tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
-
- good_end = max_pfn_mapped << PAGE_SHIFT;
#endif
+ good_end = max_pfn_mapped << PAGE_SHIFT;
base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
if (base == MEMBLOCK_ERROR)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 039d913..404f21a 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -43,6 +43,17 @@
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
+ /* 2006 AMD HT/VIA system with two host bridges */
+ {
+ .callback = set_use_crs,
+ .ident = "ASUS M2V-MX SE",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
{}
};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 58425ad..fe73276 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -678,38 +678,40 @@
pentry = (struct sfi_device_table_entry *)sb->pentry;
for (i = 0; i < num; i++, pentry++) {
- if (pentry->irq != (u8)0xff) { /* native RTE case */
+ int irq = pentry->irq;
+
+ if (irq != (u8)0xff) { /* native RTE case */
/* these SPI2 devices are not exposed to system as PCI
* devices, but they have separate RTE entry in IOAPIC
* so we have to enable them one by one here
*/
- ioapic = mp_find_ioapic(pentry->irq);
+ ioapic = mp_find_ioapic(irq);
irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = pentry->irq;
+ irq_attr.ioapic_pin = irq;
irq_attr.trigger = 1;
irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
} else
- pentry->irq = 0; /* No irq */
+ irq = 0; /* No irq */
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
/* ID as IRQ is a hack that will go away */
- pdev = platform_device_alloc(pentry->name, pentry->irq);
+ pdev = platform_device_alloc(pentry->name, irq);
if (pdev == NULL) {
pr_err("out of memory for SFI platform device '%s'.\n",
pentry->name);
continue;
}
- install_irq_resource(pdev, pentry->irq);
+ install_irq_resource(pdev, irq);
pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ "irq = 0x%2x\n", i, pentry->name, irq);
sfi_handle_ipc_dev(pdev);
break;
case SFI_DEV_TYPE_SPI:
memset(&spi_info, 0, sizeof(spi_info));
strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = pentry->irq;
+ spi_info.irq = irq;
spi_info.bus_num = pentry->host_num;
spi_info.chip_select = pentry->addr;
spi_info.max_speed_hz = pentry->max_freq;
@@ -726,7 +728,7 @@
memset(&i2c_info, 0, sizeof(i2c_info));
bus = pentry->host_num;
strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = pentry->irq;
+ i2c_info.irq = irq;
i2c_info.addr = pentry->addr;
pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
"irq = 0x%2x, addr = 0x%x\n", i, bus,
diff --git a/crypto/ghash-generic.c b/crypto/ghash-generic.c
index be44256..7835b8f 100644
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -67,6 +67,9 @@
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
u8 *dst = dctx->buffer;
+ if (!ctx->gf128)
+ return -ENOKEY;
+
if (dctx->bytes) {
int n = min(srclen, dctx->bytes);
u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
@@ -119,6 +122,9 @@
struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
u8 *buf = dctx->buffer;
+ if (!ctx->gf128)
+ return -ENOKEY;
+
ghash_flush(ctx, dctx);
memcpy(dst, buf, GHASH_BLOCK_SIZE);
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854..118ec12 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -34,8 +34,8 @@
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 saved_wakeup;
#endif
u32 non_wakeup_gpios;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index c43b8ff..0550dcb 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -577,6 +577,7 @@
void
pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
{
+ *gpio_base = -1;
}
#endif
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index e88c644..14cc88a 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -277,7 +277,12 @@
case ATOM_ARG_FB:
idx = U8(*ptr);
(*ptr)++;
- val = gctx->scratch[((gctx->fb_base + idx) / 4)];
+ if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+ DRM_ERROR("ATOM: fb read beyond scratch region: %d vs. %d\n",
+ gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+ val = 0;
+ } else
+ val = gctx->scratch[(gctx->fb_base / 4) + idx];
if (print)
DEBUG("FB[0x%02X]", idx);
break;
@@ -531,7 +536,11 @@
case ATOM_ARG_FB:
idx = U8(*ptr);
(*ptr)++;
- gctx->scratch[((gctx->fb_base + idx) / 4)] = val;
+ if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+ DRM_ERROR("ATOM: fb write beyond scratch region: %d vs. %d\n",
+ gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+ } else
+ gctx->scratch[(gctx->fb_base / 4) + idx] = val;
DEBUG("FB[0x%02X]", idx);
break;
case ATOM_ARG_PLL:
@@ -1370,11 +1379,13 @@
usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
}
+ ctx->scratch_size_bytes = 0;
if (usage_bytes == 0)
usage_bytes = 20 * 1024;
/* allocate some scratch memory */
ctx->scratch = kzalloc(usage_bytes, GFP_KERNEL);
if (!ctx->scratch)
return -ENOMEM;
+ ctx->scratch_size_bytes = usage_bytes;
return 0;
}
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
index a589a55..93cfe20 100644
--- a/drivers/gpu/drm/radeon/atom.h
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -137,6 +137,7 @@
int cs_equal, cs_above;
int io_mode;
uint32_t *scratch;
+ int scratch_size_bytes;
};
extern int atom_debug;
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c742944..a515b2a 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -466,7 +466,7 @@
return;
}
args.v2.ucEnable = enable;
- if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK))
+ if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK) || ASIC_IS_DCE41(rdev))
args.v2.ucEnable = ATOM_DISABLE;
} else if (ASIC_IS_DCE3(rdev)) {
args.v1.usSpreadSpectrumPercentage = cpu_to_le16(ss->percentage);
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 4da2388..79e8ebc 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -129,7 +129,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, NULL, 0, delay, &ack);
- if (ret < 0)
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return send_bytes;
@@ -160,7 +162,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, recv, recv_bytes, delay, &ack);
- if (ret < 0)
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return ret;
@@ -236,7 +240,9 @@
for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(auxch,
msg, msg_bytes, reply, reply_bytes, 0, &ack);
- if (ret < 0) {
+ if (ret == -EBUSY)
+ continue;
+ else if (ret < 0) {
DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
return ret;
}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index bce63fd..449c3d8 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1303,23 +1303,14 @@
/* get the DPCD from the bridge */
radeon_dp_getdpcd(radeon_connector);
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
- ret = connector_status_connected;
- else {
- /* need to setup ddc on the bridge */
- if (encoder)
- radeon_atom_ext_encoder_setup_ddc(encoder);
+ if (encoder) {
+ /* setup ddc on the bridge */
+ radeon_atom_ext_encoder_setup_ddc(encoder);
if (radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe))
+ radeon_connector->requires_extended_probe)) /* try DDC */
ret = connector_status_connected;
- }
-
- if ((ret == connector_status_disconnected) &&
- radeon_connector->dac_load_detect) {
- struct drm_encoder *encoder = radeon_best_single_encoder(connector);
- struct drm_encoder_helper_funcs *encoder_funcs;
- if (encoder) {
- encoder_funcs = encoder->helper_private;
+ else if (radeon_connector->dac_load_detect) { /* try load detection */
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 13690f3..eb3f6dc 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1638,7 +1638,17 @@
break;
case 2:
args.v2.ucCRTC = radeon_crtc->crtc_id;
- args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ if (radeon_encoder_is_dp_bridge(encoder)) {
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
+ else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
+ else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ } else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
@@ -1755,9 +1765,17 @@
/* DCE4/5 */
if (ASIC_IS_DCE4(rdev)) {
dig = radeon_encoder->enc_priv;
- if (ASIC_IS_DCE41(rdev))
- return radeon_crtc->crtc_id;
- else {
+ if (ASIC_IS_DCE41(rdev)) {
+ /* ontario follows DCE4 */
+ if (rdev->family == CHIP_PALM) {
+ if (dig->linkb)
+ return 1;
+ else
+ return 0;
+ } else
+ /* llano follows DCE3.2 */
+ return radeon_crtc->crtc_id;
+ } else {
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
if (dig->linkb)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index ae3c6f5..082fcae 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -321,7 +321,7 @@
struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
struct ttm_tt *ttm = bo->ttm;
struct ttm_mem_reg *old_mem = &bo->mem;
- struct ttm_mem_reg old_copy;
+ struct ttm_mem_reg old_copy = *old_mem;
void *old_iomap;
void *new_iomap;
int ret;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index f2b377c..36d7f27 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -390,7 +390,7 @@
{
if (is_word_sized(reg))
return LM75_TEMP_FROM_REG(regval);
- return regval * 1000;
+ return ((s8)regval) * 1000;
}
static inline u16
@@ -398,7 +398,8 @@
{
if (is_word_sized(reg))
return LM75_TEMP_TO_REG(temp);
- return DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000), 1000);
+ return (s8)DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000),
+ 1000);
}
/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
@@ -1715,7 +1716,8 @@
}
/* Get the monitoring functions started */
-static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
+ enum kinds kind)
{
int i;
u8 tmp, diode;
@@ -1746,10 +1748,16 @@
w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
/* Get thermal sensor types */
- diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ switch (kind) {
+ case w83627ehf:
+ diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ break;
+ default:
+ diode = 0x70;
+ }
for (i = 0; i < 3; i++) {
if ((tmp & (0x02 << i)))
- data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 2;
+ data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
else
data->temp_type[i] = 4; /* thermistor */
}
@@ -2016,7 +2024,7 @@
}
/* Initialize the chip */
- w83627ehf_init_device(data);
+ w83627ehf_init_device(data, sio_data->kind);
data->vrm = vid_which_vrm();
superio_enter(sio_data->sioreg);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9827c5e..811dbbd 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -327,7 +327,7 @@
select BLK_DEV_IDEPCI
help
This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+ Please read the comments at the top of <file:drivers/ide/opti621.c>.
config BLK_DEV_RZ1000
tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@
normal dual channel support.
Please read the comments at the top of
- <file:drivers/ide/pci/alim15x3.c>.
+ <file:drivers/ide/alim15x3.c>.
If unsure, say N.
@@ -528,7 +528,7 @@
This driver adds detection and support for the NS87415 chip
(used mainly on SPARC64 and PA-RISC machines).
- Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+ Please read the comments at the top of <file:drivers/ide/ns87415.c>.
config BLK_DEV_PDC202XX_OLD
tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@
for more than one card.
Please read the comments at the top of
- <file:drivers/ide/pci/pdc202xx_old.c>.
+ <file:drivers/ide/pdc202xx_old.c>.
If unsure, say N.
@@ -593,7 +593,7 @@
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
SiS745, SiS750
- Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+ Please read the comments at the top of <file:drivers/ide/sis5513.c>.
config BLK_DEV_SL82C105
tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@
look-a-like to the PIIX4 it should be a nice addition.
Please read the comments at the top of
- <file:drivers/ide/pci/slc90e66.c>.
+ <file:drivers/ide/slc90e66.c>.
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@
This driver adds support for bus master DMA transfers
using the Tekram TRM290 PCI IDE chip. Volunteers are
needed for further tweaking and development.
- Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+ Please read the comments at the top of <file:drivers/ide/trm290.c>.
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ali14xx.c> for more info.
+ <file:drivers/ide/ali14xx.c> for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
@@ -847,7 +847,7 @@
boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
well. See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/dtc2278.c> files for more info.
+ <file:drivers/ide/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@
boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well.
See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ht6560b.c> files for more info.
+ <file:drivers/ide/ht6560b.c> files for more info.
config BLK_DEV_QD65XX
tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@
boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/umc8672.c> for more info.
+ <file:drivers/ide/umc8672.c> for more info.
endif
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 0dc97ec..9dea718 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1124,11 +1124,8 @@
for (i = 0; i < 8; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
- if (wacom_wac->features.type != WACOM_21UX2) {
- input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
- }
-
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index c621c98..a88f3cb 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -306,6 +306,11 @@
return (pte->val & 3) != 0;
}
+static inline bool dma_pte_superpage(struct dma_pte *pte)
+{
+ return (pte->val & (1 << 7));
+}
+
static inline int first_pte_in_page(struct dma_pte *pte)
{
return !((unsigned long)pte & ~VTD_PAGE_MASK);
@@ -404,6 +409,9 @@
static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
+int intel_iommu_gfx_mapped;
+EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
+
#define DUMMY_DEVICE_DOMAIN_INFO ((struct device_domain_info *)(-1))
static DEFINE_SPINLOCK(device_domain_lock);
static LIST_HEAD(device_domain_list);
@@ -577,17 +585,18 @@
static void domain_update_iommu_superpage(struct dmar_domain *domain)
{
- int i, mask = 0xf;
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu = NULL;
+ int mask = 0xf;
if (!intel_iommu_superpage) {
domain->iommu_superpage = 0;
return;
}
- domain->iommu_superpage = 4; /* 1TiB */
-
- for_each_set_bit(i, &domain->iommu_bmp, g_num_of_iommus) {
- mask |= cap_super_page_val(g_iommus[i]->cap);
+ /* set iommu_superpage to the smallest common denominator */
+ for_each_active_iommu(iommu, drhd) {
+ mask &= cap_super_page_val(iommu->cap);
if (!mask) {
break;
}
@@ -730,29 +739,23 @@
}
static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
- unsigned long pfn, int large_level)
+ unsigned long pfn, int target_level)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
struct dma_pte *parent, *pte = NULL;
int level = agaw_to_level(domain->agaw);
- int offset, target_level;
+ int offset;
BUG_ON(!domain->pgd);
BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
parent = domain->pgd;
- /* Search pte */
- if (!large_level)
- target_level = 1;
- else
- target_level = large_level;
-
while (level > 0) {
void *tmp_page;
offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
- if (!large_level && (pte->val & DMA_PTE_LARGE_PAGE))
+ if (!target_level && (dma_pte_superpage(pte) || !dma_pte_present(pte)))
break;
if (level == target_level)
break;
@@ -816,13 +819,14 @@
}
/* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain,
+static int dma_pte_clear_range(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
unsigned int large_page = 1;
struct dma_pte *first_pte, *pte;
+ int order;
BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
@@ -846,6 +850,9 @@
(void *)pte - (void *)first_pte);
} while (start_pfn && start_pfn <= last_pfn);
+
+ order = (large_page - 1) * 9;
+ return order;
}
/* free page table pages. last level pte should already be cleared */
@@ -3226,9 +3233,6 @@
}
}
- if (dmar_map_gfx)
- return;
-
for_each_drhd_unit(drhd) {
int i;
if (drhd->ignored || drhd->include_all)
@@ -3236,18 +3240,23 @@
for (i = 0; i < drhd->devices_cnt; i++)
if (drhd->devices[i] &&
- !IS_GFX_DEVICE(drhd->devices[i]))
+ !IS_GFX_DEVICE(drhd->devices[i]))
break;
if (i < drhd->devices_cnt)
continue;
- /* bypass IOMMU if it is just for gfx devices */
- drhd->ignored = 1;
- for (i = 0; i < drhd->devices_cnt; i++) {
- if (!drhd->devices[i])
- continue;
- drhd->devices[i]->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+ /* This IOMMU has *only* gfx devices. Either bypass it or
+ set the gfx_mapped flag, as appropriate */
+ if (dmar_map_gfx) {
+ intel_iommu_gfx_mapped = 1;
+ } else {
+ drhd->ignored = 1;
+ for (i = 0; i < drhd->devices_cnt; i++) {
+ if (!drhd->devices[i])
+ continue;
+ drhd->devices[i]->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+ }
}
}
}
@@ -3568,6 +3577,8 @@
found = 1;
}
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+
if (found == 0) {
unsigned long tmp_flags;
spin_lock_irqsave(&domain->iommu_lock, tmp_flags);
@@ -3584,8 +3595,6 @@
spin_unlock_irqrestore(&iommu->lock, tmp_flags);
}
}
-
- spin_unlock_irqrestore(&device_domain_lock, flags);
}
static void vm_domain_remove_all_dev_info(struct dmar_domain *domain)
@@ -3739,6 +3748,7 @@
vm_domain_exit(dmar_domain);
return -ENOMEM;
}
+ domain_update_iommu_cap(dmar_domain);
domain->priv = dmar_domain;
return 0;
@@ -3864,14 +3874,15 @@
{
struct dmar_domain *dmar_domain = domain->priv;
size_t size = PAGE_SIZE << gfp_order;
+ int order;
- dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ order = dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
(iova + size - 1) >> VTD_PAGE_SHIFT);
if (dmar_domain->max_addr == iova + size)
dmar_domain->max_addr = iova;
- return gfp_order;
+ return order;
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3950,7 +3961,11 @@
if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
printk(KERN_INFO "DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
dmar_map_gfx = 0;
- }
+ } else if (dmar_map_gfx) {
+ /* we have to ensure the gfx device is idle before we flush */
+ printk(KERN_INFO "DMAR: Disabling batched IOTLB flush on Ironlake\n");
+ intel_iommu_strict = 1;
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 49da55c..8c2a000 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1698,6 +1698,8 @@
}
ti->num_flush_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
+
return 0;
bad:
diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 89f73ca..f84c080 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -81,8 +81,10 @@
* corrupt_bio_byte <Nth_byte> <direction> <value> <bio_flags>
*/
if (!strcasecmp(arg_name, "corrupt_bio_byte")) {
- if (!argc)
+ if (!argc) {
ti->error = "Feature corrupt_bio_byte requires parameters";
+ return -EINVAL;
+ }
r = dm_read_arg(_args + 1, as, &fc->corrupt_bio_byte, &ti->error);
if (r)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index f821470..32ac708 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -628,6 +628,7 @@
job->kc = kc;
job->fn = fn;
job->context = context;
+ job->master_job = job;
atomic_inc(&kc->nr_jobs);
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index a002dd8..86df8b2 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -449,7 +449,7 @@
rs->ti->error = "write_mostly option is only valid for RAID1";
return -EINVAL;
}
- if (value > rs->md.raid_disks) {
+ if (value >= rs->md.raid_disks) {
rs->ti->error = "Invalid write_mostly drive index given";
return -EINVAL;
}
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 986b875..bc04518 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1238,14 +1238,15 @@
return;
template_disk = dm_table_get_integrity_disk(t, true);
- if (!template_disk &&
- blk_integrity_is_initialized(dm_disk(t->md))) {
+ if (template_disk)
+ blk_integrity_register(dm_disk(t->md),
+ blk_get_integrity(template_disk));
+ else if (blk_integrity_is_initialized(dm_disk(t->md)))
DMWARN("%s: device no longer has a valid integrity profile",
dm_device_name(t->md));
- return;
- }
- blk_integrity_register(dm_disk(t->md),
- blk_get_integrity(template_disk));
+ else
+ DMWARN("%s: unable to establish an integrity profile",
+ dm_device_name(t->md));
}
static int device_flush_capable(struct dm_target *ti, struct dm_dev *dev,
@@ -1282,6 +1283,22 @@
return 0;
}
+static bool dm_table_discard_zeroes_data(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i = 0;
+
+ /* Ensure that all targets supports discard_zeroes_data. */
+ while (i < dm_table_get_num_targets(t)) {
+ ti = dm_table_get_target(t, i++);
+
+ if (ti->discard_zeroes_data_unsupported)
+ return 0;
+ }
+
+ return 1;
+}
+
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
@@ -1304,6 +1321,9 @@
}
blk_queue_flush(q, flush);
+ if (!dm_table_discard_zeroes_data(t))
+ q->limits.discard_zeroes_data = 0;
+
dm_table_set_integrity(t);
/*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 5404b22..5c95ccb 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -61,6 +61,11 @@
static void autostart_arrays(int part);
#endif
+/* pers_list is a list of registered personalities protected
+ * by pers_lock.
+ * pers_lock does extra service to protect accesses to
+ * mddev->thread when the mutex cannot be held.
+ */
static LIST_HEAD(pers_list);
static DEFINE_SPINLOCK(pers_lock);
@@ -739,7 +744,12 @@
} else
mutex_unlock(&mddev->reconfig_mutex);
+ /* was we've dropped the mutex we need a spinlock to
+ * make sur the thread doesn't disappear
+ */
+ spin_lock(&pers_lock);
md_wakeup_thread(mddev->thread);
+ spin_unlock(&pers_lock);
}
static mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
@@ -6429,11 +6439,18 @@
return thread;
}
-void md_unregister_thread(mdk_thread_t *thread)
+void md_unregister_thread(mdk_thread_t **threadp)
{
+ mdk_thread_t *thread = *threadp;
if (!thread)
return;
dprintk("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
+ /* Locking ensures that mddev_unlock does not wake_up a
+ * non-existent thread
+ */
+ spin_lock(&pers_lock);
+ *threadp = NULL;
+ spin_unlock(&pers_lock);
kthread_stop(thread->tsk);
kfree(thread);
@@ -7340,8 +7357,7 @@
mdk_rdev_t *rdev;
/* resync has finished, collect result */
- md_unregister_thread(mddev->sync_thread);
- mddev->sync_thread = NULL;
+ md_unregister_thread(&mddev->sync_thread);
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 1e586bb..0a309dc 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -560,7 +560,7 @@
extern int unregister_md_personality(struct mdk_personality *p);
extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
mddev_t *mddev, const char *name);
-extern void md_unregister_thread(mdk_thread_t *thread);
+extern void md_unregister_thread(mdk_thread_t **threadp);
extern void md_wakeup_thread(mdk_thread_t *thread);
extern void md_check_recovery(mddev_t *mddev);
extern void md_write_start(mddev_t *mddev, struct bio *bi);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 3535c23..d5b5fb3 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -514,8 +514,7 @@
{
multipath_conf_t *conf = mddev->private;
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
mempool_destroy(conf->pool);
kfree(conf->multipaths);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index f4622dd..d9587df 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2562,8 +2562,7 @@
raise_barrier(conf);
lower_barrier(conf);
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (conf->r1bio_pool)
mempool_destroy(conf->r1bio_pool);
kfree(conf->mirrors);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d7a8468..0cd9672 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2955,7 +2955,7 @@
return 0;
out_free_conf:
- md_unregister_thread(mddev->thread);
+ md_unregister_thread(&mddev->thread);
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
safe_put_page(conf->tmppage);
@@ -2973,8 +2973,7 @@
raise_barrier(conf, 0);
lower_barrier(conf);
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 43709fa..ac5e8b5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4941,8 +4941,7 @@
return 0;
abort:
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (conf) {
print_raid5_conf(conf);
free_conf(conf);
@@ -4956,8 +4955,7 @@
{
raid5_conf_t *conf = mddev->private;
- md_unregister_thread(mddev->thread);
- mddev->thread = NULL;
+ md_unregister_thread(&mddev->thread);
if (mddev->queue)
mddev->queue->backing_dev_info.congested_fn = NULL;
free_conf(conf);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index d721565..a5c9ed1 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -181,7 +181,7 @@
* TODO: In the long run all drivers that use v4l2_device should use the
* v4l2_device release callback. This check will then be unnecessary.
*/
- if (v4l2_dev->release == NULL)
+ if (v4l2_dev && v4l2_dev->release == NULL)
v4l2_dev = NULL;
/* Release video_device and perform other
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index e46df53..9a7eb3b 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -239,13 +239,19 @@
* FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
*
*/
-/* iSCSI L2 */
-#define BNX2X_ISCSI_ETH_CL_ID_IDX 1
-#define BNX2X_ISCSI_ETH_CID 49
+enum {
+ BNX2X_ISCSI_ETH_CL_ID_IDX,
+ BNX2X_FCOE_ETH_CL_ID_IDX,
+ BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
+};
-/* FCoE L2 */
-#define BNX2X_FCOE_ETH_CL_ID_IDX 2
-#define BNX2X_FCOE_ETH_CID 50
+#define BNX2X_CNIC_START_ETH_CID 48
+enum {
+ /* iSCSI L2 */
+ BNX2X_ISCSI_ETH_CID = BNX2X_CNIC_START_ETH_CID,
+ /* FCoE L2 */
+ BNX2X_FCOE_ETH_CID,
+};
/** Additional rings budgeting */
#ifdef BCM_CNIC
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 223bfee..2dc1199 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1297,7 +1297,7 @@
static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
{
return bp->cnic_base_cl_id + cl_idx +
- (bp->pf_num >> 1) * NON_ETH_CONTEXT_USE;
+ (bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX;
}
static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6d79b78..de3d351 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1435,6 +1435,8 @@
struct sk_buff *skb = *pskb;
struct slave *slave;
struct bonding *bond;
+ void (*recv_probe)(struct sk_buff *, struct bonding *,
+ struct slave *);
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
@@ -1448,11 +1450,12 @@
if (bond->params.arp_interval)
slave->dev->last_rx = jiffies;
- if (bond->recv_probe) {
+ recv_probe = ACCESS_ONCE(bond->recv_probe);
+ if (recv_probe) {
struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
if (likely(nskb)) {
- bond->recv_probe(nskb, bond, slave);
+ recv_probe(nskb, bond, slave);
dev_kfree_skb(nskb);
}
}
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 92feac6..4cc6f44 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -261,11 +261,13 @@
void __iomem *data = ®s->tx.dsr1_0;
u16 *payload = (u16 *)frame->data;
- /* It is safe to write into dsr[dlc+1] */
- for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ for (i = 0; i < frame->can_dlc / 2; i++) {
out_be16(data, *payload++);
data += 2 + _MSCAN_RESERVED_DSR_SIZE;
}
+ /* write remaining byte if necessary */
+ if (frame->can_dlc & 1)
+ out_8(data, frame->data[frame->can_dlc - 1]);
}
out_8(®s->tx.dlr, frame->can_dlc);
@@ -330,10 +332,13 @@
void __iomem *data = ®s->rx.dsr1_0;
u16 *payload = (u16 *)frame->data;
- for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ for (i = 0; i < frame->can_dlc / 2; i++) {
*payload++ = in_be16(data);
data += 2 + _MSCAN_RESERVED_DSR_SIZE;
}
+ /* read remaining byte if necessary */
+ if (frame->can_dlc & 1)
+ frame->data[frame->can_dlc - 1] = in_8(data);
}
out_8(®s->canrflg, MSCAN_RXF);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 05172c3..376e3e9 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -239,7 +239,7 @@
dest = macvlan_hash_lookup(port, eth->h_dest);
if (dest && dest->mode == MACVLAN_MODE_BRIDGE) {
/* send to lowerdev first for its network taps */
- vlan->forward(vlan->lowerdev, skb);
+ dev_forward_skb(vlan->lowerdev, skb);
return NET_XMIT_SUCCESS;
}
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 6e03de0..f76ab6b 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -172,7 +172,7 @@
memset(ring->buf, 0, ring->buf_size);
ring->qp_state = MLX4_QP_STATE_RST;
- ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
+ ring->doorbell_qpn = ring->qp.qpn << 8;
mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
ring->cqn, &ring->context);
@@ -791,7 +791,7 @@
skb_orphan(skb);
if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
- *(u32 *) (&tx_desc->ctrl.vlan_tag) |= ring->doorbell_qpn;
+ *(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
op_own |= htonl((bf_index & 0xffff) << 8);
/* Ensure new descirptor hits memory
* before setting ownership of this descriptor to HW */
@@ -812,7 +812,7 @@
wmb();
tx_desc->ctrl.owner_opcode = op_own;
wmb();
- writel(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
+ iowrite32be(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
}
/* Poll CQ here */
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index ed2a397..e888202 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -307,6 +307,11 @@
return err;
if (enabled < 0 || enabled > 1)
return -EINVAL;
+ if (enabled == nt->enabled) {
+ printk(KERN_INFO "netconsole: network logging has already %s\n",
+ nt->enabled ? "started" : "stopped");
+ return -EINVAL;
+ }
if (enabled) { /* 1 */
diff --git a/drivers/net/pptp.c b/drivers/net/pptp.c
index eae542a..89f829f 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/pptp.c
@@ -285,8 +285,10 @@
ip_send_check(iph);
ip_local_out(skb);
+ return 1;
tx_error:
+ kfree_skb(skb);
return 1;
}
@@ -305,11 +307,18 @@
}
header = (struct pptp_gre_header *)(skb->data);
+ headersize = sizeof(*header);
/* test if acknowledgement present */
if (PPTP_GRE_IS_A(header->ver)) {
- __u32 ack = (PPTP_GRE_IS_S(header->flags)) ?
- header->ack : header->seq; /* ack in different place if S = 0 */
+ __u32 ack;
+
+ if (!pskb_may_pull(skb, headersize))
+ goto drop;
+ header = (struct pptp_gre_header *)(skb->data);
+
+ /* ack in different place if S = 0 */
+ ack = PPTP_GRE_IS_S(header->flags) ? header->ack : header->seq;
ack = ntohl(ack);
@@ -318,21 +327,18 @@
/* also handle sequence number wrap-around */
if (WRAPPED(ack, opt->ack_recv))
opt->ack_recv = ack;
+ } else {
+ headersize -= sizeof(header->ack);
}
-
/* test if payload present */
if (!PPTP_GRE_IS_S(header->flags))
goto drop;
- headersize = sizeof(*header);
payload_len = ntohs(header->payload_len);
seq = ntohl(header->seq);
- /* no ack present? */
- if (!PPTP_GRE_IS_A(header->ver))
- headersize -= sizeof(header->ack);
/* check for incomplete packet (length smaller than expected) */
- if (skb->len - headersize < payload_len)
+ if (!pskb_may_pull(skb, headersize + payload_len))
goto drop;
payload = skb->data + headersize;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c236670..6d657ca 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2859,7 +2859,7 @@
rtl_writephy(tp, 0x1f, 0x0004);
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x0020);
- rtl_w1w0_phy(tp, 0x06, 0x0000, 0x0100);
+ rtl_w1w0_phy(tp, 0x15, 0x0000, 0x0100);
rtl_writephy(tp, 0x1f, 0x0002);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x0d, 0x0007);
@@ -3316,6 +3316,37 @@
}
}
+static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_29:
+ case RTL_GIGA_MAC_VER_30:
+ case RTL_GIGA_MAC_VER_32:
+ case RTL_GIGA_MAC_VER_33:
+ case RTL_GIGA_MAC_VER_34:
+ RTL_W32(RxConfig, RTL_R32(RxConfig) |
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool rtl_wol_pll_power_down(struct rtl8169_private *tp)
+{
+ if (!(__rtl8169_get_wol(tp) & WAKE_ANY))
+ return false;
+
+ rtl_writephy(tp, 0x1f, 0x0000);
+ rtl_writephy(tp, MII_BMCR, 0x0000);
+
+ rtl_wol_suspend_quirk(tp);
+
+ return true;
+}
+
static void r810x_phy_power_down(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
@@ -3330,18 +3361,8 @@
static void r810x_pll_power_down(struct rtl8169_private *tp)
{
- void __iomem *ioaddr = tp->mmio_addr;
-
- if (__rtl8169_get_wol(tp) & WAKE_ANY) {
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
- if (tp->mac_version == RTL_GIGA_MAC_VER_29 ||
- tp->mac_version == RTL_GIGA_MAC_VER_30)
- RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
- AcceptMulticast | AcceptMyPhys);
+ if (rtl_wol_pll_power_down(tp))
return;
- }
r810x_phy_power_down(tp);
}
@@ -3430,17 +3451,8 @@
tp->mac_version == RTL_GIGA_MAC_VER_33)
rtl_ephy_write(ioaddr, 0x19, 0xff64);
- if (__rtl8169_get_wol(tp) & WAKE_ANY) {
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
- if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
- tp->mac_version == RTL_GIGA_MAC_VER_33 ||
- tp->mac_version == RTL_GIGA_MAC_VER_34)
- RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
- AcceptMulticast | AcceptMyPhys);
+ if (rtl_wol_pll_power_down(tp))
return;
- }
r8168_phy_power_down(tp);
@@ -5788,11 +5800,30 @@
#endif /* !CONFIG_PM */
+static void rtl_wol_shutdown_quirk(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* WoL fails with 8168b when the receiver is disabled. */
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_11:
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ pci_clear_master(tp->pci_dev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ break;
+ default:
+ break;
+ }
+}
+
static void rtl_shutdown(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->mmio_addr;
rtl8169_net_suspend(dev);
@@ -5806,16 +5837,9 @@
spin_unlock_irq(&tp->lock);
if (system_state == SYSTEM_POWER_OFF) {
- /* WoL fails with 8168b when the receiver is disabled. */
- if ((tp->mac_version == RTL_GIGA_MAC_VER_11 ||
- tp->mac_version == RTL_GIGA_MAC_VER_12 ||
- tp->mac_version == RTL_GIGA_MAC_VER_17) &&
- (tp->features & RTL_FEATURE_WOL)) {
- pci_clear_master(pdev);
-
- RTL_W8(ChipCmd, CmdRxEnb);
- /* PCI commit */
- RTL_R8(ChipCmd);
+ if (__rtl8169_get_wol(tp) & WAKE_ANY) {
+ rtl_wol_suspend_quirk(tp);
+ rtl_wol_shutdown_quirk(tp);
}
pci_wake_from_d3(pdev, true);
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b9016a3..c90ddb6 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -26,6 +26,7 @@
* LAN9215, LAN9216, LAN9217, LAN9218
* LAN9210, LAN9211
* LAN9220, LAN9221
+ * LAN89218
*
*/
@@ -1983,6 +1984,7 @@
case 0x01170000:
case 0x01160000:
case 0x01150000:
+ case 0x218A0000:
/* LAN911[5678] family */
pdata->generation = pdata->idrev & 0x0000FFFF;
break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4a1374d..c11a2b8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -15577,7 +15577,7 @@
cancel_work_sync(&tp->reset_task);
- if (!tg3_flag(tp, USE_PHYLIB)) {
+ if (tg3_flag(tp, USE_PHYLIB)) {
tg3_phy_fini(tp);
tg3_mdio_fini(tp);
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3ff22e3..f7239b3 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -662,6 +662,90 @@
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+ int index, const char **output)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if ((*p != 0) && (i++ == index)) {
+ *output = p;
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if (*p != 0)
+ i++;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 9f689f1..791270b 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -19,10 +19,12 @@
*/
#include <linux/errno.h>
+#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/string.h>
+#include <linux/slab.h>
/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */
#ifndef NO_IRQ
@@ -386,3 +388,108 @@
return i;
}
+
+struct intc_desc {
+ struct list_head list;
+ struct device_node *dev;
+ struct device_node *interrupt_parent;
+};
+
+/**
+ * of_irq_init - Scan and init matching interrupt controllers in DT
+ * @matches: 0 terminated array of nodes to match and init function to call
+ *
+ * This function scans the device tree for matching interrupt controller nodes,
+ * and calls their initialization functions in order with parents first.
+ */
+void __init of_irq_init(const struct of_device_id *matches)
+{
+ struct device_node *np, *parent = NULL;
+ struct intc_desc *desc, *temp_desc;
+ struct list_head intc_desc_list, intc_parent_list;
+
+ INIT_LIST_HEAD(&intc_desc_list);
+ INIT_LIST_HEAD(&intc_parent_list);
+
+ for_each_matching_node(np, matches) {
+ if (!of_find_property(np, "interrupt-controller", NULL))
+ continue;
+ /*
+ * Here, we allocate and populate an intc_desc with the node
+ * pointer, interrupt-parent device_node etc.
+ */
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (WARN_ON(!desc))
+ goto err;
+
+ desc->dev = np;
+ desc->interrupt_parent = of_irq_find_parent(np);
+ list_add_tail(&desc->list, &intc_desc_list);
+ }
+
+ /*
+ * The root irq controller is the one without an interrupt-parent.
+ * That one goes first, followed by the controllers that reference it,
+ * followed by the ones that reference the 2nd level controllers, etc.
+ */
+ while (!list_empty(&intc_desc_list)) {
+ /*
+ * Process all controllers with the current 'parent'.
+ * First pass will be looking for NULL as the parent.
+ * The assumption is that NULL parent means a root controller.
+ */
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ const struct of_device_id *match;
+ int ret;
+ of_irq_init_cb_t irq_init_cb;
+
+ if (desc->interrupt_parent != parent)
+ continue;
+
+ list_del(&desc->list);
+ match = of_match_node(matches, desc->dev);
+ if (WARN(!match->data,
+ "of_irq_init: no init function for %s\n",
+ match->compatible)) {
+ kfree(desc);
+ continue;
+ }
+
+ pr_debug("of_irq_init: init %s @ %p, parent %p\n",
+ match->compatible,
+ desc->dev, desc->interrupt_parent);
+ irq_init_cb = match->data;
+ ret = irq_init_cb(desc->dev, desc->interrupt_parent);
+ if (ret) {
+ kfree(desc);
+ continue;
+ }
+
+ /*
+ * This one is now set up; add it to the parent list so
+ * its children can get processed in a subsequent pass.
+ */
+ list_add_tail(&desc->list, &intc_parent_list);
+ }
+
+ /* Get the next pending parent that might have children */
+ desc = list_first_entry(&intc_parent_list, typeof(*desc), list);
+ if (list_empty(&intc_parent_list) || !desc) {
+ pr_err("of_irq_init: children remain, but no parents\n");
+ break;
+ }
+ list_del(&desc->list);
+ parent = desc->dev;
+ kfree(desc);
+ }
+
+ list_for_each_entry_safe(desc, temp_desc, &intc_parent_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+err:
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index c9e3dc0..16ad97d 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1769,10 +1769,12 @@
sas_disable_routing(parent, phy->attached_sas_addr);
}
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
- sas_port_delete_phy(phy->port, phy->phy);
- if (phy->port->num_phys == 0)
- sas_port_delete(phy->port);
- phy->port = NULL;
+ if (phy->port) {
+ sas_port_delete_phy(phy->port, phy->phy);
+ if (phy->port->num_phys == 0)
+ sas_port_delete(phy->port);
+ phy->port = NULL;
+ }
}
static int sas_discover_bfs_by_root_level(struct domain_device *root,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4cace3f..1e69527 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1328,10 +1328,9 @@
qla2x00_sp_compl(ha, sp);
} else {
ctx = sp->ctx;
- if (ctx->type == SRB_LOGIN_CMD ||
- ctx->type == SRB_LOGOUT_CMD) {
- ctx->u.iocb_cmd->free(sp);
- } else {
+ if (ctx->type == SRB_ELS_CMD_RPT ||
+ ctx->type == SRB_ELS_CMD_HST ||
+ ctx->type == SRB_CT_CMD) {
struct fc_bsg_job *bsg_job =
ctx->u.bsg_job;
if (bsg_job->request->msgcode
@@ -1343,6 +1342,8 @@
kfree(sp->ctx);
mempool_free(sp,
ha->srb_mempool);
+ } else {
+ ctx->u.iocb_cmd->free(sp);
}
}
}
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 1a7c19a..8b307b4 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -411,7 +411,8 @@
skb->protocol = eth_type_trans(skb, dev);
skb->dev = dev;
- if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error))
+ if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc ||
+ work->word2.s.L4_error || !work->word2.s.tcp_or_udp))
skb->ip_summed = CHECKSUM_NONE;
else
skb->ip_summed = CHECKSUM_UNNECESSARY;
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 58cf279..bc95f52 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -478,8 +478,10 @@
spin_unlock_irqrestore(<q_asc_lock, flags);
/* Don't rewrite B0 */
- if (tty_termios_baud_rate(new))
+ if (tty_termios_baud_rate(new))
tty_termios_encode_baud_rate(new, baud, baud);
+
+ uart_update_timeout(port, cflag, baud);
}
static const char*
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e6ba838..7767902 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -19,6 +19,7 @@
# define SUPPORT_SYSRQ
#endif
+#include <linux/atomic.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -33,6 +34,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "msm_serial.h"
@@ -589,9 +592,8 @@
iowrite32(GSBI_PROTOCOL_IDLE, msm_port->gsbi_base +
GSBI_CONTROL);
- gsbi_resource = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev,
+ IORESOURCE_MEM, 1);
if (unlikely(!gsbi_resource))
return;
@@ -612,8 +614,7 @@
resource_size_t size;
int ret;
- uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!uart_resource))
return -ENXIO;
@@ -628,8 +629,7 @@
goto fail_release_port;
}
- gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
/* Is this a GSBI-based port? */
if (gsbi_resource) {
size = resource_size(gsbi_resource);
@@ -859,6 +859,8 @@
.cons = MSM_CONSOLE,
};
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
static int __init msm_serial_probe(struct platform_device *pdev)
{
struct msm_port *msm_port;
@@ -866,6 +868,9 @@
struct uart_port *port;
int irq;
+ if (pdev->id == -1)
+ pdev->id = atomic_inc_return(&msm_uart_next_id) - 1;
+
if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
return -ENXIO;
@@ -875,7 +880,7 @@
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
- if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"))
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
msm_port->is_uartdm = 1;
else
msm_port->is_uartdm = 0;
@@ -899,8 +904,7 @@
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
- resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!resource))
return -ENXIO;
port->mapbase = resource->start;
@@ -924,11 +928,17 @@
return 0;
}
+static struct of_device_id msm_match_table[] = {
+ { .compatible = "qcom,msm-uart" },
+ {}
+};
+
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
+ .of_match_table = msm_match_table,
},
};
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4..61f4ee4 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#ifdef CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
#include <asm/uaccess.h>
#include "musb_core.h"
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 538f65a..dae5dfe 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1047,7 +1047,16 @@
if (!max_to_defrag)
max_to_defrag = last_index - 1;
- while (i <= last_index && defrag_count < max_to_defrag) {
+ /*
+ * make writeback starts from i, so the defrag range can be
+ * written sequentially.
+ */
+ if (i < inode->i_mapping->writeback_index)
+ inode->i_mapping->writeback_index = i;
+
+ while (i <= last_index && defrag_count < max_to_defrag &&
+ (i < (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT)) {
/*
* make sure we stop running if someone unmounts
* the FS
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index f4af4cc..71beb02 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2018,7 +2018,7 @@
warned_on_ntlm = true;
cERROR(1, "default security mechanism requested. The default "
"security mechanism will be upgraded from ntlm to "
- "ntlmv2 in kernel release 3.1");
+ "ntlmv2 in kernel release 3.2");
}
ses->overrideSecFlg = volume_info->secFlg;
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index cac2ecf..ef43fce 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -629,7 +629,7 @@
* the xfsbufd to get this buffer written. We have to unlock the buffer
* to allow the xfsbufd to write it, too.
*/
-STATIC void
+STATIC bool
xfs_buf_item_pushbuf(
struct xfs_log_item *lip)
{
@@ -643,6 +643,7 @@
xfs_buf_delwri_promote(bp);
xfs_buf_relse(bp);
+ return true;
}
STATIC void
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index 9e0e2fa..bb3f71d 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -183,13 +183,14 @@
* search the buffer cache can be a time consuming thing, and AIL lock is a
* spinlock.
*/
-STATIC void
+STATIC bool
xfs_qm_dquot_logitem_pushbuf(
struct xfs_log_item *lip)
{
struct xfs_dq_logitem *qlip = DQUOT_ITEM(lip);
struct xfs_dquot *dqp = qlip->qli_dquot;
struct xfs_buf *bp;
+ bool ret = true;
ASSERT(XFS_DQ_IS_LOCKED(dqp));
@@ -201,17 +202,20 @@
if (completion_done(&dqp->q_flush) ||
!(lip->li_flags & XFS_LI_IN_AIL)) {
xfs_dqunlock(dqp);
- return;
+ return true;
}
bp = xfs_incore(dqp->q_mount->m_ddev_targp, qlip->qli_format.qlf_blkno,
dqp->q_mount->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
xfs_dqunlock(dqp);
if (!bp)
- return;
+ return true;
if (XFS_BUF_ISDELAYWRITE(bp))
xfs_buf_delwri_promote(bp);
+ if (xfs_buf_ispinned(bp))
+ ret = false;
xfs_buf_relse(bp);
+ return ret;
}
/*
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 588406d..836ad80 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -708,13 +708,14 @@
* marked delayed write. If that's the case, we'll promote it and that will
* allow the caller to write the buffer by triggering the xfsbufd to run.
*/
-STATIC void
+STATIC bool
xfs_inode_item_pushbuf(
struct xfs_log_item *lip)
{
struct xfs_inode_log_item *iip = INODE_ITEM(lip);
struct xfs_inode *ip = iip->ili_inode;
struct xfs_buf *bp;
+ bool ret = true;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
@@ -725,7 +726,7 @@
if (completion_done(&ip->i_flush) ||
!(lip->li_flags & XFS_LI_IN_AIL)) {
xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return;
+ return true;
}
bp = xfs_incore(ip->i_mount->m_ddev_targp, iip->ili_format.ilf_blkno,
@@ -733,10 +734,13 @@
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (!bp)
- return;
+ return true;
if (XFS_BUF_ISDELAYWRITE(bp))
xfs_buf_delwri_promote(bp);
+ if (xfs_buf_ispinned(bp))
+ ret = false;
xfs_buf_relse(bp);
+ return ret;
}
/*
diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index 1e8a45e..828662f 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -68,6 +68,8 @@
#include <linux/ctype.h>
#include <linux/writeback.h>
#include <linux/capability.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/list_sort.h>
#include <asm/page.h>
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 2366c54..5cf06b8 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1652,24 +1652,13 @@
*/
xfs_syncd_wq = alloc_workqueue("xfssyncd", WQ_CPU_INTENSIVE, 8);
if (!xfs_syncd_wq)
- goto out;
-
- xfs_ail_wq = alloc_workqueue("xfsail", WQ_CPU_INTENSIVE, 8);
- if (!xfs_ail_wq)
- goto out_destroy_syncd;
-
+ return -ENOMEM;
return 0;
-
-out_destroy_syncd:
- destroy_workqueue(xfs_syncd_wq);
-out:
- return -ENOMEM;
}
STATIC void
xfs_destroy_workqueues(void)
{
- destroy_workqueue(xfs_ail_wq);
destroy_workqueue(xfs_syncd_wq);
}
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 06a9759..53597f4 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -350,7 +350,7 @@
void (*iop_unlock)(xfs_log_item_t *);
xfs_lsn_t (*iop_committed)(xfs_log_item_t *, xfs_lsn_t);
void (*iop_push)(xfs_log_item_t *);
- void (*iop_pushbuf)(xfs_log_item_t *);
+ bool (*iop_pushbuf)(xfs_log_item_t *);
void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
} xfs_item_ops_t;
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index c15aa29..3a1e7ca 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -28,8 +28,6 @@
#include "xfs_trans_priv.h"
#include "xfs_error.h"
-struct workqueue_struct *xfs_ail_wq; /* AIL workqueue */
-
#ifdef DEBUG
/*
* Check that the list is sorted as it should be.
@@ -356,16 +354,10 @@
xfs_trans_ail_cursor_clear(ailp, lip);
}
-/*
- * xfs_ail_worker does the work of pushing on the AIL. It will requeue itself
- * to run at a later time if there is more work to do to complete the push.
- */
-STATIC void
-xfs_ail_worker(
- struct work_struct *work)
+static long
+xfsaild_push(
+ struct xfs_ail *ailp)
{
- struct xfs_ail *ailp = container_of(to_delayed_work(work),
- struct xfs_ail, xa_work);
xfs_mount_t *mp = ailp->xa_mount;
struct xfs_ail_cursor cur;
xfs_log_item_t *lip;
@@ -427,8 +419,13 @@
case XFS_ITEM_PUSHBUF:
XFS_STATS_INC(xs_push_ail_pushbuf);
- IOP_PUSHBUF(lip);
- ailp->xa_last_pushed_lsn = lsn;
+
+ if (!IOP_PUSHBUF(lip)) {
+ stuck++;
+ flush_log = 1;
+ } else {
+ ailp->xa_last_pushed_lsn = lsn;
+ }
push_xfsbufd = 1;
break;
@@ -440,7 +437,6 @@
case XFS_ITEM_LOCKED:
XFS_STATS_INC(xs_push_ail_locked);
- ailp->xa_last_pushed_lsn = lsn;
stuck++;
break;
@@ -501,20 +497,6 @@
/* We're past our target or empty, so idle */
ailp->xa_last_pushed_lsn = 0;
- /*
- * We clear the XFS_AIL_PUSHING_BIT first before checking
- * whether the target has changed. If the target has changed,
- * this pushes the requeue race directly onto the result of the
- * atomic test/set bit, so we are guaranteed that either the
- * the pusher that changed the target or ourselves will requeue
- * the work (but not both).
- */
- clear_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags);
- smp_rmb();
- if (XFS_LSN_CMP(ailp->xa_target, target) == 0 ||
- test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
- return;
-
tout = 50;
} else if (XFS_LSN_CMP(lsn, target) >= 0) {
/*
@@ -537,9 +519,30 @@
tout = 20;
}
- /* There is more to do, requeue us. */
- queue_delayed_work(xfs_syncd_wq, &ailp->xa_work,
- msecs_to_jiffies(tout));
+ return tout;
+}
+
+static int
+xfsaild(
+ void *data)
+{
+ struct xfs_ail *ailp = data;
+ long tout = 0; /* milliseconds */
+
+ while (!kthread_should_stop()) {
+ if (tout && tout <= 20)
+ __set_current_state(TASK_KILLABLE);
+ else
+ __set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(tout ?
+ msecs_to_jiffies(tout) : MAX_SCHEDULE_TIMEOUT);
+
+ try_to_freeze();
+
+ tout = xfsaild_push(ailp);
+ }
+
+ return 0;
}
/*
@@ -574,8 +577,9 @@
*/
smp_wmb();
xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn);
- if (!test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
- queue_delayed_work(xfs_syncd_wq, &ailp->xa_work, 0);
+ smp_wmb();
+
+ wake_up_process(ailp->xa_task);
}
/*
@@ -813,9 +817,18 @@
INIT_LIST_HEAD(&ailp->xa_ail);
INIT_LIST_HEAD(&ailp->xa_cursors);
spin_lock_init(&ailp->xa_lock);
- INIT_DELAYED_WORK(&ailp->xa_work, xfs_ail_worker);
+
+ ailp->xa_task = kthread_run(xfsaild, ailp, "xfsaild/%s",
+ ailp->xa_mount->m_fsname);
+ if (IS_ERR(ailp->xa_task))
+ goto out_free_ailp;
+
mp->m_ail = ailp;
return 0;
+
+out_free_ailp:
+ kmem_free(ailp);
+ return ENOMEM;
}
void
@@ -824,6 +837,6 @@
{
struct xfs_ail *ailp = mp->m_ail;
- cancel_delayed_work_sync(&ailp->xa_work);
+ kthread_stop(ailp->xa_task);
kmem_free(ailp);
}
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index 212946b..22750b5 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -64,23 +64,17 @@
*/
struct xfs_ail {
struct xfs_mount *xa_mount;
+ struct task_struct *xa_task;
struct list_head xa_ail;
xfs_lsn_t xa_target;
struct list_head xa_cursors;
spinlock_t xa_lock;
- struct delayed_work xa_work;
xfs_lsn_t xa_last_pushed_lsn;
- unsigned long xa_flags;
};
-#define XFS_AIL_PUSHING_BIT 0
-
/*
* From xfs_trans_ail.c
*/
-
-extern struct workqueue_struct *xfs_ail_wq; /* AIL workqueue */
-
void xfs_trans_ail_update_bulk(struct xfs_ail *ailp,
struct xfs_ail_cursor *cur,
struct xfs_log_item **log_items, int nr_items,
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 0000000..455b233
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost. The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU. They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+ /* A single cpu is entering a low power state */
+ CPU_PM_ENTER,
+
+ /* A single cpu failed to enter a low power state */
+ CPU_PM_ENTER_FAILED,
+
+ /* A single cpu is exiting a low power state */
+ CPU_PM_EXIT,
+
+ /* A cpu power domain is entering a low power state */
+ CPU_CLUSTER_PM_ENTER,
+
+ /* A cpu power domain failed to enter a low power state */
+ CPU_CLUSTER_PM_ENTER_FAILED,
+
+ /* A cpu power domain is exiting a low power state */
+ CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+ return 0;
+}
+#endif
+#endif
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 3fa1f3d..99e3e50 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -197,6 +197,11 @@
* whether or not its underlying devices have support.
*/
unsigned discards_supported:1;
+
+ /*
+ * Set if this target does not return zeroes on discarded blocks.
+ */
+ unsigned discard_zeroes_data_unsupported:1;
};
/* Each target can link one of these into the table */
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index a103732..664544f 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -95,6 +95,7 @@
* @flags: flags (see IRQF_* above)
* @name: name of the device
* @dev_id: cookie to identify the device
+ * @percpu_dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
* @dir: pointer to the proc/irq/NN/name entry
@@ -104,17 +105,18 @@
* @thread_mask: bitmask for keeping track of @thread activity
*/
struct irqaction {
- irq_handler_t handler;
- unsigned long flags;
- void *dev_id;
- struct irqaction *next;
- int irq;
- irq_handler_t thread_fn;
- struct task_struct *thread;
- unsigned long thread_flags;
- unsigned long thread_mask;
- const char *name;
- struct proc_dir_entry *dir;
+ irq_handler_t handler;
+ unsigned long flags;
+ void *dev_id;
+ void __percpu *percpu_dev_id;
+ struct irqaction *next;
+ int irq;
+ irq_handler_t thread_fn;
+ struct task_struct *thread;
+ unsigned long thread_flags;
+ unsigned long thread_mask;
+ const char *name;
+ struct proc_dir_entry *dir;
} ____cacheline_internodealigned_in_smp;
extern irqreturn_t no_action(int cpl, void *dev_id);
@@ -136,6 +138,10 @@
request_any_context_irq(unsigned int irq, irq_handler_t handler,
unsigned long flags, const char *name, void *dev_id);
+extern int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id);
+
extern void exit_irq_thread(void);
#else
@@ -164,10 +170,18 @@
return request_irq(irq, handler, flags, name, dev_id);
}
+static inline int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id)
+{
+ return request_irq(irq, handler, 0, devname, percpu_dev_id);
+}
+
static inline void exit_irq_thread(void) { }
#endif
extern void free_irq(unsigned int, void *);
+extern void free_percpu_irq(unsigned int, void __percpu *);
struct device;
@@ -207,7 +221,9 @@
extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
+extern void disable_percpu_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq, unsigned int type);
/* The following three functions are for the core kernel use only. */
#ifdef CONFIG_GENERIC_HARDIRQS
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 5951730..59e49c8 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -66,6 +66,7 @@
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
+ * IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
@@ -88,12 +89,13 @@
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
IRQ_NOTHREAD = (1 << 16),
+ IRQ_PER_CPU_DEVID = (1 << 17),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
- IRQ_PER_CPU | IRQ_NESTED_THREAD)
+ IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
@@ -336,12 +338,14 @@
* IRQCHIP_MASK_ON_SUSPEND: Mask non wake irqs in the suspend path
* IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks
* when irq enabled
+ * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip
*/
enum {
IRQCHIP_SET_TYPE_MASKED = (1 << 0),
IRQCHIP_EOI_IF_HANDLED = (1 << 1),
IRQCHIP_MASK_ON_SUSPEND = (1 << 2),
IRQCHIP_ONOFFLINE_ENABLED = (1 << 3),
+ IRQCHIP_SKIP_SET_WAKE = (1 << 4),
};
/* This include will go away once we isolated irq_desc usage to core code */
@@ -365,6 +369,8 @@
struct irqaction;
extern int setup_irq(unsigned int irq, struct irqaction *new);
extern void remove_irq(unsigned int irq, struct irqaction *act);
+extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
+extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
@@ -392,6 +398,7 @@
extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_nested_irq(unsigned int irq);
@@ -420,6 +427,8 @@
irq_set_chip_and_handler_name(irq, chip, handle, NULL);
}
+extern int irq_set_percpu_devid(unsigned int irq);
+
extern void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
@@ -481,6 +490,13 @@
irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
}
+static inline void irq_set_percpu_devid_flags(unsigned int irq)
+{
+ irq_set_status_flags(irq,
+ IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
+ IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
+}
+
/* Handle dynamic irq creation and destruction */
extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 150134a..6b69c2c 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -53,6 +53,7 @@
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
raw_spinlock_t lock;
+ struct cpumask *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 3ad553e..99834e58 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -47,6 +47,7 @@
* of the irq_domain is responsible for allocating the array of
* irq_desc structures.
* @nr_irq: Number of irqs managed by the irq domain
+ * @hwirq_base: Starting number for hwirqs managed by the irq domain
* @ops: pointer to irq_domain methods
* @priv: private data pointer for use by owner. Not touched by irq_domain
* core code.
@@ -57,6 +58,7 @@
struct list_head list;
unsigned int irq_base;
unsigned int nr_irq;
+ unsigned int hwirq_base;
const struct irq_domain_ops *ops;
void *priv;
struct device_node *of_node;
@@ -72,9 +74,21 @@
static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
unsigned long hwirq)
{
- return d->ops->to_irq ? d->ops->to_irq(d, hwirq) : d->irq_base + hwirq;
+ if (d->ops->to_irq)
+ return d->ops->to_irq(d, hwirq);
+ if (WARN_ON(hwirq < d->hwirq_base))
+ return 0;
+ return d->irq_base + hwirq - d->hwirq_base;
}
+#define irq_domain_for_each_hwirq(d, hw) \
+ for (hw = d->hwirq_base; hw < d->hwirq_base + d->nr_irq; hw++)
+
+#define irq_domain_for_each_irq(d, hw, irq) \
+ for (hw = d->hwirq_base, irq = irq_domain_to_irq(d, hw); \
+ hw < d->hwirq_base + d->nr_irq; \
+ hw++, irq = irq_domain_to_irq(d, hw))
+
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/include/linux/of.h b/include/linux/of.h
index 9180dc5..5dfe2d5 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -203,6 +203,11 @@
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+ const char *propname);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -256,6 +261,19 @@
return -ENOSYS;
}
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname, int index,
+ const char **out_string)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return -ENOSYS;
+}
+
static inline const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp)
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index cd2e61c..d0307ee 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -33,6 +33,8 @@
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
+typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
+
/*
* Workarounds only applied to 32bit powermac machines
*/
@@ -73,6 +75,7 @@
struct resource *res, int nr_irqs);
extern struct device_node *of_irq_find_parent(struct device_node *child);
+extern void of_irq_init(const struct of_device_id *matches);
#endif /* CONFIG_OF_IRQ */
#endif /* CONFIG_OF */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 1aaf915..8fa4430 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -900,6 +900,7 @@
volatile int sync_state;
volatile int master_syncid;
volatile int backup_syncid;
+ struct mutex sync_mutex;
/* multicast interface name */
char master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
char backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
diff --git a/include/net/udplite.h b/include/net/udplite.h
index 673a024..5f097ca 100644
--- a/include/net/udplite.h
+++ b/include/net/udplite.h
@@ -66,41 +66,35 @@
return 0;
}
-static inline int udplite_sender_cscov(struct udp_sock *up, struct udphdr *uh)
-{
- int cscov = up->len;
-
- /*
- * Sender has set `partial coverage' option on UDP-Lite socket
- */
- if (up->pcflag & UDPLITE_SEND_CC) {
- if (up->pcslen < up->len) {
- /* up->pcslen == 0 means that full coverage is required,
- * partial coverage only if 0 < up->pcslen < up->len */
- if (0 < up->pcslen) {
- cscov = up->pcslen;
- }
- uh->len = htons(up->pcslen);
- }
- /*
- * NOTE: Causes for the error case `up->pcslen > up->len':
- * (i) Application error (will not be penalized).
- * (ii) Payload too big for send buffer: data is split
- * into several packets, each with its own header.
- * In this case (e.g. last segment), coverage may
- * exceed packet length.
- * Since packets with coverage length > packet length are
- * illegal, we fall back to the defaults here.
- */
- }
- return cscov;
-}
-
+/* Slow-path computation of checksum. Socket is locked. */
static inline __wsum udplite_csum_outgoing(struct sock *sk, struct sk_buff *skb)
{
- int cscov = udplite_sender_cscov(udp_sk(sk), udp_hdr(skb));
+ const struct udp_sock *up = udp_sk(skb->sk);
+ int cscov = up->len;
__wsum csum = 0;
+ if (up->pcflag & UDPLITE_SEND_CC) {
+ /*
+ * Sender has set `partial coverage' option on UDP-Lite socket.
+ * The special case "up->pcslen == 0" signifies full coverage.
+ */
+ if (up->pcslen < up->len) {
+ if (0 < up->pcslen)
+ cscov = up->pcslen;
+ udp_hdr(skb)->len = htons(up->pcslen);
+ }
+ /*
+ * NOTE: Causes for the error case `up->pcslen > up->len':
+ * (i) Application error (will not be penalized).
+ * (ii) Payload too big for send buffer: data is split
+ * into several packets, each with its own header.
+ * In this case (e.g. last segment), coverage may
+ * exceed packet length.
+ * Since packets with coverage length > packet length are
+ * illegal, we fall back to the defaults here.
+ */
+ }
+
skb->ip_summed = CHECKSUM_NONE; /* no HW support for checksumming */
skb_queue_walk(&sk->sk_write_queue, skb) {
@@ -115,16 +109,21 @@
return csum;
}
+/* Fast-path computation of checksum. Socket may not be locked. */
static inline __wsum udplite_csum(struct sk_buff *skb)
{
- struct sock *sk = skb->sk;
- int cscov = udplite_sender_cscov(udp_sk(sk), udp_hdr(skb));
+ const struct udp_sock *up = udp_sk(skb->sk);
const int off = skb_transport_offset(skb);
- const int len = skb->len - off;
+ int len = skb->len - off;
+ if ((up->pcflag & UDPLITE_SEND_CC) && up->pcslen < len) {
+ if (0 < up->pcslen)
+ len = up->pcslen;
+ udp_hdr(skb)->len = htons(up->pcslen);
+ }
skb->ip_summed = CHECKSUM_NONE; /* no HW support for checksumming */
- return skb_checksum(skb, off, min(cscov, len), 0);
+ return skb_checksum(skb, off, len, 0);
}
extern void udplite4_register(void);
diff --git a/kernel/Makefile b/kernel/Makefile
index eca595e..988cb3d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -101,6 +101,7 @@
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
+obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_PERF_EVENTS) += events/
diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c
new file mode 100644
index 0000000..249152e
--- /dev/null
+++ b/kernel/cpu_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+
+static DEFINE_RWLOCK(cpu_pm_notifier_lock);
+static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+
+static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls)
+{
+ int ret;
+
+ ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL,
+ nr_to_call, nr_calls);
+
+ return notifier_to_errno(ret);
+}
+
+/**
+ * cpu_pm_register_notifier - register a driver with cpu_pm
+ * @nb: notifier block to register
+ *
+ * Add a driver to a list of drivers that are notified about
+ * CPU and CPU cluster low power entry and exit.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_register.
+ */
+int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
+
+/**
+ * cpu_pm_unregister_notifier - unregister a driver with cpu_pm
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU PM notifier list.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_unregister.
+ */
+int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
+
+/**
+ * cpm_pm_enter - CPU low power entry notifier
+ *
+ * Notifies listeners that a single CPU is entering a low power state that may
+ * cause some blocks in the same power domain as the cpu to reset.
+ *
+ * Must be called on the affected CPU with interrupts disabled. Platform is
+ * responsible for ensuring that cpu_pm_enter is not called twice on the same
+ * CPU before cpu_pm_exit is called. Notified drivers can include VFP
+ * co-processor, interrupt controller and it's PM extensions, local CPU
+ * timers context save/restore which shouldn't be interrupted. Hence it
+ * must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU PM
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_enter);
+
+/**
+ * cpm_pm_exit - CPU low power exit notifier
+ *
+ * Notifies listeners that a single CPU is exiting a low power state that may
+ * have caused some blocks in the same power domain as the cpu to reset.
+ *
+ * Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_exit);
+
+/**
+ * cpm_cluster_pm_enter - CPU cluster low power entry notifier
+ *
+ * Notifies listeners that all cpus in a power domain are entering a low power
+ * state that may cause some blocks in the same power domain to reset.
+ *
+ * Must be called after cpu_pm_enter has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU cluster
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter);
+
+/**
+ * cpm_cluster_pm_exit - CPU cluster low power exit notifier
+ *
+ * Notifies listeners that all cpus in a power domain are exiting form a
+ * low power state that may have caused some blocks in the same power domain
+ * to reset.
+ *
+ * Must be called after cpu_pm_exit has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit);
+
+#ifdef CONFIG_PM
+static int cpu_pm_suspend(void)
+{
+ int ret;
+
+ ret = cpu_pm_enter();
+ if (ret)
+ return ret;
+
+ ret = cpu_cluster_pm_enter();
+ return ret;
+}
+
+static void cpu_pm_resume(void)
+{
+ cpu_cluster_pm_exit();
+ cpu_pm_exit();
+}
+
+static struct syscore_ops cpu_pm_syscore_ops = {
+ .suspend = cpu_pm_suspend,
+ .resume = cpu_pm_resume,
+};
+
+static int cpu_pm_init(void)
+{
+ register_syscore_ops(&cpu_pm_syscore_ops);
+ return 0;
+}
+core_initcall(cpu_pm_init);
+#endif
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0f85778..fbe38f2 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5758,6 +5758,7 @@
pmu = idr_find(&pmu_idr, event->attr.type);
rcu_read_unlock();
if (pmu) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (ret)
pmu = ERR_PTR(ret);
@@ -5765,6 +5766,7 @@
}
list_for_each_entry_rcu(pmu, &pmus, entry) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (!ret)
goto unlock;
@@ -5891,8 +5893,6 @@
return ERR_PTR(err);
}
- event->pmu = pmu;
-
if (!event->parent) {
if (event->attach_state & PERF_ATTACH_TASK)
jump_label_inc(&perf_sched_events);
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index dc5114b..f7c543a 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -26,7 +26,7 @@
int irq_set_chip(unsigned int irq, struct irq_chip *chip)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -54,7 +54,7 @@
int irq_set_irq_type(unsigned int irq, unsigned int type)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
@@ -78,7 +78,7 @@
int irq_set_handler_data(unsigned int irq, void *data)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -98,7 +98,7 @@
int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -119,7 +119,7 @@
int irq_set_chip_data(unsigned int irq, void *data)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -204,6 +204,24 @@
}
}
+void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_enable)
+ desc->irq_data.chip->irq_enable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ cpumask_set_cpu(cpu, desc->percpu_enabled);
+}
+
+void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_disable)
+ desc->irq_data.chip->irq_disable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+ cpumask_clear_cpu(cpu, desc->percpu_enabled);
+}
+
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
@@ -544,12 +562,44 @@
chip->irq_eoi(&desc->irq_data);
}
+/**
+ * handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
+ * @irq: the interrupt number
+ * @desc: the interrupt description structure for this irq
+ *
+ * Per CPU interrupts on SMP machines without locking requirements. Same as
+ * handle_percpu_irq() above but with the following extras:
+ *
+ * action->percpu_dev_id is a pointer to percpu variables which
+ * contain the real device id for the cpu on which this handler is
+ * called
+ */
+void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ void *dev_id = __this_cpu_ptr(action->percpu_dev_id);
+ irqreturn_t res;
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, dev_id);
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, 0);
if (!desc)
return;
@@ -593,7 +643,7 @@
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return;
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 6546431..a73dd6c 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -71,6 +71,8 @@
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
+extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
+extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
@@ -114,14 +116,21 @@
desc->irq_data.chip->irq_bus_sync_unlock(&desc->irq_data);
}
+#define _IRQ_DESC_CHECK (1 << 0)
+#define _IRQ_DESC_PERCPU (1 << 1)
+
+#define IRQ_GET_DESC_CHECK_GLOBAL (_IRQ_DESC_CHECK)
+#define IRQ_GET_DESC_CHECK_PERCPU (_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
+
struct irq_desc *
-__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus);
+__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
+ unsigned int check);
void __irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags, bool bus);
static inline struct irq_desc *
-irq_get_desc_buslock(unsigned int irq, unsigned long *flags)
+irq_get_desc_buslock(unsigned int irq, unsigned long *flags, unsigned int check)
{
- return __irq_get_desc_lock(irq, flags, true);
+ return __irq_get_desc_lock(irq, flags, true, check);
}
static inline void
@@ -131,9 +140,9 @@
}
static inline struct irq_desc *
-irq_get_desc_lock(unsigned int irq, unsigned long *flags)
+irq_get_desc_lock(unsigned int irq, unsigned long *flags, unsigned int check)
{
- return __irq_get_desc_lock(irq, flags, false);
+ return __irq_get_desc_lock(irq, flags, false, check);
}
static inline void
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 039b889..1550e84 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -424,11 +424,22 @@
}
struct irq_desc *
-__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus)
+__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
+ unsigned int check)
{
struct irq_desc *desc = irq_to_desc(irq);
if (desc) {
+ if (check & _IRQ_DESC_CHECK) {
+ if ((check & _IRQ_DESC_PERCPU) &&
+ !irq_settings_is_per_cpu_devid(desc))
+ return NULL;
+
+ if (!(check & _IRQ_DESC_PERCPU) &&
+ irq_settings_is_per_cpu_devid(desc))
+ return NULL;
+ }
+
if (bus)
chip_bus_lock(desc);
raw_spin_lock_irqsave(&desc->lock, *flags);
@@ -443,6 +454,25 @@
chip_bus_sync_unlock(desc);
}
+int irq_set_percpu_devid(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return -EINVAL;
+
+ if (desc->percpu_enabled)
+ return -EINVAL;
+
+ desc->percpu_enabled = kzalloc(sizeof(*desc->percpu_enabled), GFP_KERNEL);
+
+ if (!desc->percpu_enabled)
+ return -ENOMEM;
+
+ irq_set_percpu_devid_flags(irq);
+ return 0;
+}
+
/**
* dynamic_irq_cleanup - cleanup a dynamically allocated irq
* @irq: irq number to initialize
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index b57a377..200ce83 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -20,15 +20,15 @@
void irq_domain_add(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
/*
* This assumes that the irq_domain owner has already allocated
* the irq_descs. This block will be removed when support for dynamic
* allocation of irq_descs is added to irq_domain.
*/
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
if (!d) {
WARN(1, "error: assigning domain to non existant irq_desc");
return;
@@ -54,15 +54,15 @@
void irq_domain_del(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
mutex_lock(&irq_domain_mutex);
list_del(&domain->list);
mutex_unlock(&irq_domain_mutex);
/* Clear the irq_domain assignments */
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
d->domain = NULL;
}
}
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 9b956fa..67ce837 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -195,7 +195,7 @@
int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -356,7 +356,7 @@
static int __disable_irq_nosync(unsigned int irq)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -448,7 +448,7 @@
void enable_irq(unsigned int irq)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return;
@@ -467,6 +467,9 @@
struct irq_desc *desc = irq_to_desc(irq);
int ret = -ENXIO;
+ if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
+ return 0;
+
if (desc->irq_data.chip->irq_set_wake)
ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
@@ -488,7 +491,7 @@
int irq_set_irq_wake(unsigned int irq, unsigned int on)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
@@ -529,7 +532,7 @@
int can_request_irq(unsigned int irq, unsigned long irqflags)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
int canrequest = 0;
if (!desc)
@@ -1118,6 +1121,8 @@
int retval;
struct irq_desc *desc = irq_to_desc(irq);
+ if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ return -EINVAL;
chip_bus_lock(desc);
retval = __setup_irq(irq, desc, act);
chip_bus_sync_unlock(desc);
@@ -1126,7 +1131,7 @@
}
EXPORT_SYMBOL_GPL(setup_irq);
- /*
+/*
* Internal function to unregister an irqaction - used to free
* regular and special interrupts that are part of the architecture.
*/
@@ -1224,7 +1229,10 @@
*/
void remove_irq(unsigned int irq, struct irqaction *act)
{
- __free_irq(irq, act->dev_id);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ __free_irq(irq, act->dev_id);
}
EXPORT_SYMBOL_GPL(remove_irq);
@@ -1246,7 +1254,7 @@
{
struct irq_desc *desc = irq_to_desc(irq);
- if (!desc)
+ if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return;
#ifdef CONFIG_SMP
@@ -1324,7 +1332,8 @@
if (!desc)
return -EINVAL;
- if (!irq_settings_can_request(desc))
+ if (!irq_settings_can_request(desc) ||
+ WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return -EINVAL;
if (!handler) {
@@ -1409,3 +1418,194 @@
return !ret ? IRQC_IS_HARDIRQ : ret;
}
EXPORT_SYMBOL_GPL(request_any_context_irq);
+
+void enable_percpu_irq(unsigned int irq, unsigned int type)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
+
+ if (!desc)
+ return;
+
+ type &= IRQ_TYPE_SENSE_MASK;
+ if (type != IRQ_TYPE_NONE) {
+ int ret;
+
+ ret = __irq_set_trigger(desc, irq, type);
+
+ if (ret) {
+ WARN(1, "failed to set type for IRQ%d\n", irq);
+ goto out;
+ }
+ }
+
+ irq_percpu_enable(desc, cpu);
+out:
+ irq_put_desc_unlock(desc, flags);
+}
+
+void disable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
+
+ if (!desc)
+ return;
+
+ irq_percpu_disable(desc, cpu);
+ irq_put_desc_unlock(desc, flags);
+}
+
+/*
+ * Internal function to unregister a percpu irqaction.
+ */
+static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ unsigned long flags;
+
+ WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
+
+ if (!desc)
+ return NULL;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || action->percpu_dev_id != dev_id) {
+ WARN(1, "Trying to free already-free IRQ %d\n", irq);
+ goto bad;
+ }
+
+ if (!cpumask_empty(desc->percpu_enabled)) {
+ WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
+ irq, cpumask_first(desc->percpu_enabled));
+ goto bad;
+ }
+
+ /* Found it - now remove it from the list of entries: */
+ desc->action = NULL;
+
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
+ unregister_handler_proc(irq, action);
+
+ module_put(desc->owner);
+ return action;
+
+bad:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ return NULL;
+}
+
+/**
+ * remove_percpu_irq - free a per-cpu interrupt
+ * @irq: Interrupt line to free
+ * @act: irqaction for the interrupt
+ *
+ * Used to remove interrupts statically setup by the early boot process.
+ */
+void remove_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && irq_settings_is_per_cpu_devid(desc))
+ __free_percpu_irq(irq, act->percpu_dev_id);
+}
+
+/**
+ * free_percpu_irq - free an interrupt allocated with request_percpu_irq
+ * @irq: Interrupt line to free
+ * @dev_id: Device identity to free
+ *
+ * Remove a percpu interrupt handler. The handler is removed, but
+ * the interrupt line is not disabled. This must be done on each
+ * CPU before calling this function. The function does not return
+ * until any executing interrupts for this IRQ have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return;
+
+ chip_bus_lock(desc);
+ kfree(__free_percpu_irq(irq, dev_id));
+ chip_bus_sync_unlock(desc);
+}
+
+/**
+ * setup_percpu_irq - setup a per-cpu interrupt
+ * @irq: Interrupt line to setup
+ * @act: irqaction for the interrupt
+ *
+ * Used to statically setup per-cpu interrupts in the early boot process.
+ */
+int setup_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ int retval;
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, act);
+ chip_bus_sync_unlock(desc);
+
+ return retval;
+}
+
+/**
+ * request_percpu_irq - allocate a percpu interrupt line
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs.
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A percpu cookie passed back to the handler function
+ *
+ * This call allocates interrupt resources, but doesn't
+ * automatically enable the interrupt. It has to be done on each
+ * CPU using enable_percpu_irq().
+ *
+ * Dev_id must be globally unique. It is a per-cpu variable, and
+ * the handler gets called with the interrupted CPU's instance of
+ * that variable.
+ */
+int request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *dev_id)
+{
+ struct irqaction *action;
+ struct irq_desc *desc;
+ int retval;
+
+ if (!dev_id)
+ return -EINVAL;
+
+ desc = irq_to_desc(irq);
+ if (!desc || !irq_settings_can_request(desc) ||
+ !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+
+ action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler = handler;
+ action->flags = IRQF_PERCPU;
+ action->name = devname;
+ action->percpu_dev_id = dev_id;
+
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(desc);
+
+ if (retval)
+ kfree(action);
+
+ return retval;
+}
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index f166783..1162f10 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -13,6 +13,7 @@
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
+ _IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
@@ -24,6 +25,7 @@
#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
+#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
@@ -39,6 +41,11 @@
return desc->status_use_accessors & _IRQ_PER_CPU;
}
+static inline bool irq_settings_is_per_cpu_devid(struct irq_desc *desc)
+{
+ return desc->status_use_accessors & _IRQ_PER_CPU_DEVID;
+}
+
static inline void irq_settings_set_per_cpu(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_PER_CPU;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index c8008dd..640ded8 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -274,9 +274,7 @@
struct task_cputime sum;
unsigned long flags;
- spin_lock_irqsave(&cputimer->lock, flags);
if (!cputimer->running) {
- cputimer->running = 1;
/*
* The POSIX timer interface allows for absolute time expiry
* values through the TIMER_ABSTIME flag, therefore we have
@@ -284,8 +282,11 @@
* it.
*/
thread_group_cputime(tsk, &sum);
+ spin_lock_irqsave(&cputimer->lock, flags);
+ cputimer->running = 1;
update_gt_cputime(&cputimer->cputime, &sum);
- }
+ } else
+ spin_lock_irqsave(&cputimer->lock, flags);
*times = cputimer->cputime;
spin_unlock_irqrestore(&cputimer->lock, flags);
}
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 3744c59..80a8597 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -235,3 +235,7 @@
config PM_GENERIC_DOMAINS_RUNTIME
def_bool y
depends on PM_RUNTIME && PM_GENERIC_DOMAINS
+
+config CPU_PM
+ bool
+ depends on SUSPEND || CPU_IDLE
diff --git a/kernel/sys.c b/kernel/sys.c
index 18ee1d2..1dbbe69 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1172,7 +1172,7 @@
static int override_release(char __user *release, int len)
{
int ret = 0;
- char buf[len];
+ char buf[65];
if (current->personality & UNAME26) {
char *rest = UTS_RELEASE;
diff --git a/mm/migrate.c b/mm/migrate.c
index 666e4e6..14d0a6a 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -120,10 +120,10 @@
ptep = pte_offset_map(pmd, addr);
- if (!is_swap_pte(*ptep)) {
- pte_unmap(ptep);
- goto out;
- }
+ /*
+ * Peek to check is_swap_pte() before taking ptlock? No, we
+ * can race mremap's move_ptes(), which skips anon_vma lock.
+ */
ptl = pte_lockptr(mm, pmd);
}
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 61f1f62..e829236 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -26,6 +26,8 @@
/* Bluetooth L2CAP sockets. */
+#include <linux/security.h>
+
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
@@ -933,6 +935,8 @@
chan->force_reliable = pchan->force_reliable;
chan->flushable = pchan->flushable;
chan->force_active = pchan->force_active;
+
+ security_sk_clone(parent, sk);
} else {
switch (sk->sk_type) {
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 482722b..5417f61 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -42,6 +42,7 @@
#include <linux/device.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/security.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -264,6 +265,8 @@
pi->sec_level = rfcomm_pi(parent)->sec_level;
pi->role_switch = rfcomm_pi(parent)->role_switch;
+
+ security_sk_clone(parent, sk);
} else {
pi->dlc->defer_setup = 0;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8270f05..a324b00 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -41,6 +41,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/list.h>
+#include <linux/security.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -403,8 +404,10 @@
{
BT_DBG("sk %p", sk);
- if (parent)
+ if (parent) {
sk->sk_type = parent->sk_type;
+ security_sk_clone(parent, sk);
+ }
}
static struct proto sco_proto = {
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 32b8f9f..ff3ed60 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -91,7 +91,6 @@
{
struct net_bridge *br = netdev_priv(dev);
- netif_carrier_off(dev);
netdev_update_features(dev);
netif_start_queue(dev);
br_stp_enable_bridge(br);
@@ -108,8 +107,6 @@
{
struct net_bridge *br = netdev_priv(dev);
- netif_carrier_off(dev);
-
br_stp_disable_bridge(br);
br_multicast_stop(br);
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index e738154..1d420f6 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -161,9 +161,10 @@
call_rcu(&p->rcu, destroy_nbp_rcu);
}
-/* called with RTNL */
-static void del_br(struct net_bridge *br, struct list_head *head)
+/* Delete bridge device */
+void br_dev_delete(struct net_device *dev, struct list_head *head)
{
+ struct net_bridge *br = netdev_priv(dev);
struct net_bridge_port *p, *n;
list_for_each_entry_safe(p, n, &br->port_list, list) {
@@ -268,7 +269,7 @@
}
else
- del_br(netdev_priv(dev), NULL);
+ br_dev_delete(dev, NULL);
rtnl_unlock();
return ret;
@@ -449,7 +450,7 @@
rtnl_lock();
for_each_netdev(net, dev)
if (dev->priv_flags & IFF_EBRIDGE)
- del_br(netdev_priv(dev), &list);
+ br_dev_delete(dev, &list);
unregister_netdevice_many(&list);
rtnl_unlock();
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 5b1ed1b..e5f9ece3 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -210,6 +210,7 @@
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
.validate = br_validate,
+ .dellink = br_dev_delete,
};
int __init br_netlink_init(void)
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 78cc364..857a021 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -294,6 +294,7 @@
/* br_device.c */
extern void br_dev_setup(struct net_device *dev);
+extern void br_dev_delete(struct net_device *dev, struct list_head *list);
extern netdev_tx_t br_dev_xmit(struct sk_buff *skb,
struct net_device *dev);
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 3231b46..27071ee 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -475,8 +475,11 @@
list_del_rcu(&rule->list);
- if (rule->action == FR_ACT_GOTO)
+ if (rule->action == FR_ACT_GOTO) {
ops->nr_goto_rules--;
+ if (rtnl_dereference(rule->ctarget) == NULL)
+ ops->unresolved_rules--;
+ }
/*
* Check if this rule is a target to any of them. If so,
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 21fab3e..d73aab3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1389,9 +1389,7 @@
BUG_ON(!pcount);
- /* Tweak before seqno plays */
- if (!tcp_is_fack(tp) && tcp_is_sack(tp) && tp->lost_skb_hint &&
- !before(TCP_SKB_CB(tp->lost_skb_hint)->seq, TCP_SKB_CB(skb)->seq))
+ if (skb == tp->lost_skb_hint)
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index c34f015..7963e03 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -927,18 +927,21 @@
}
sk_nocaps_add(sk, NETIF_F_GSO_MASK);
}
- if (tcp_alloc_md5sig_pool(sk) == NULL) {
+
+ md5sig = tp->md5sig_info;
+ if (md5sig->entries4 == 0 &&
+ tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
- md5sig = tp->md5sig_info;
if (md5sig->alloced4 == md5sig->entries4) {
keys = kmalloc((sizeof(*keys) *
(md5sig->entries4 + 1)), GFP_ATOMIC);
if (!keys) {
kfree(newkey);
- tcp_free_md5sig_pool();
+ if (md5sig->entries4 == 0)
+ tcp_free_md5sig_pool();
return -ENOMEM;
}
@@ -982,6 +985,7 @@
kfree(tp->md5sig_info->keys4);
tp->md5sig_info->keys4 = NULL;
tp->md5sig_info->alloced4 = 0;
+ tcp_free_md5sig_pool();
} else if (tp->md5sig_info->entries4 != i) {
/* Need to do some manipulation */
memmove(&tp->md5sig_info->keys4[i],
@@ -989,7 +993,6 @@
(tp->md5sig_info->entries4 - i) *
sizeof(struct tcp4_md5sig_key));
}
- tcp_free_md5sig_pool();
return 0;
}
}
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index d2fe4e0..0ce3d06 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -328,6 +328,7 @@
struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
const int rto = (icsk->icsk_rto << 2) - (icsk->icsk_rto >> 1);
+ tw->tw_transparent = inet_sk(sk)->transparent;
tw->tw_rcv_wscale = tp->rx_opt.rcv_wscale;
tcptw->tw_rcv_nxt = tp->rcv_nxt;
tcptw->tw_snd_nxt = tp->snd_nxt;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3b5669a..d27c797 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -875,6 +875,7 @@
skb_reset_transport_header(skb);
__skb_push(skb, skb_gro_offset(skb));
+ ops = rcu_dereference(inet6_protos[proto]);
if (!ops || !ops->gro_receive)
goto out_unlock;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 79cc646..7b8fc57 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -591,7 +591,8 @@
}
sk_nocaps_add(sk, NETIF_F_GSO_MASK);
}
- if (tcp_alloc_md5sig_pool(sk) == NULL) {
+ if (tp->md5sig_info->entries6 == 0 &&
+ tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
@@ -600,8 +601,9 @@
(tp->md5sig_info->entries6 + 1)), GFP_ATOMIC);
if (!keys) {
- tcp_free_md5sig_pool();
kfree(newkey);
+ if (tp->md5sig_info->entries6 == 0)
+ tcp_free_md5sig_pool();
return -ENOMEM;
}
@@ -647,6 +649,7 @@
kfree(tp->md5sig_info->keys6);
tp->md5sig_info->keys6 = NULL;
tp->md5sig_info->alloced6 = 0;
+ tcp_free_md5sig_pool();
} else {
/* shrink the database */
if (tp->md5sig_info->entries6 != i)
@@ -655,7 +658,6 @@
(tp->md5sig_info->entries6 - i)
* sizeof (tp->md5sig_info->keys6[0]));
}
- tcp_free_md5sig_pool();
return 0;
}
}
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index ad4ac26..34b2dde 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1045,8 +1045,10 @@
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
uhlen + hdr_len;
old_headroom = skb_headroom(skb);
- if (skb_cow_head(skb, headroom))
+ if (skb_cow_head(skb, headroom)) {
+ dev_kfree_skb(skb);
goto abort;
+ }
new_headroom = skb_headroom(skb);
skb_orphan(skb);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 2b771dc..e3be48b 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2283,6 +2283,7 @@
struct ip_vs_service *svc;
struct ip_vs_dest_user *udest_compat;
struct ip_vs_dest_user_kern udest;
+ struct netns_ipvs *ipvs = net_ipvs(net);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
@@ -2303,6 +2304,24 @@
/* increase the module use count */
ip_vs_use_count_inc();
+ /* Handle daemons since they have another lock */
+ if (cmd == IP_VS_SO_SET_STARTDAEMON ||
+ cmd == IP_VS_SO_SET_STOPDAEMON) {
+ struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
+
+ if (mutex_lock_interruptible(&ipvs->sync_mutex)) {
+ ret = -ERESTARTSYS;
+ goto out_dec;
+ }
+ if (cmd == IP_VS_SO_SET_STARTDAEMON)
+ ret = start_sync_thread(net, dm->state, dm->mcast_ifn,
+ dm->syncid);
+ else
+ ret = stop_sync_thread(net, dm->state);
+ mutex_unlock(&ipvs->sync_mutex);
+ goto out_dec;
+ }
+
if (mutex_lock_interruptible(&__ip_vs_mutex)) {
ret = -ERESTARTSYS;
goto out_dec;
@@ -2316,15 +2335,6 @@
/* Set timeout values for (tcp tcpfin udp) */
ret = ip_vs_set_timeout(net, (struct ip_vs_timeout_user *)arg);
goto out_unlock;
- } else if (cmd == IP_VS_SO_SET_STARTDAEMON) {
- struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
- ret = start_sync_thread(net, dm->state, dm->mcast_ifn,
- dm->syncid);
- goto out_unlock;
- } else if (cmd == IP_VS_SO_SET_STOPDAEMON) {
- struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
- ret = stop_sync_thread(net, dm->state);
- goto out_unlock;
}
usvc_compat = (struct ip_vs_service_user *)arg;
@@ -2584,6 +2594,33 @@
if (copy_from_user(arg, user, copylen) != 0)
return -EFAULT;
+ /*
+ * Handle daemons first since it has its own locking
+ */
+ if (cmd == IP_VS_SO_GET_DAEMON) {
+ struct ip_vs_daemon_user d[2];
+
+ memset(&d, 0, sizeof(d));
+ if (mutex_lock_interruptible(&ipvs->sync_mutex))
+ return -ERESTARTSYS;
+
+ if (ipvs->sync_state & IP_VS_STATE_MASTER) {
+ d[0].state = IP_VS_STATE_MASTER;
+ strlcpy(d[0].mcast_ifn, ipvs->master_mcast_ifn,
+ sizeof(d[0].mcast_ifn));
+ d[0].syncid = ipvs->master_syncid;
+ }
+ if (ipvs->sync_state & IP_VS_STATE_BACKUP) {
+ d[1].state = IP_VS_STATE_BACKUP;
+ strlcpy(d[1].mcast_ifn, ipvs->backup_mcast_ifn,
+ sizeof(d[1].mcast_ifn));
+ d[1].syncid = ipvs->backup_syncid;
+ }
+ if (copy_to_user(user, &d, sizeof(d)) != 0)
+ ret = -EFAULT;
+ mutex_unlock(&ipvs->sync_mutex);
+ return ret;
+ }
if (mutex_lock_interruptible(&__ip_vs_mutex))
return -ERESTARTSYS;
@@ -2681,28 +2718,6 @@
}
break;
- case IP_VS_SO_GET_DAEMON:
- {
- struct ip_vs_daemon_user d[2];
-
- memset(&d, 0, sizeof(d));
- if (ipvs->sync_state & IP_VS_STATE_MASTER) {
- d[0].state = IP_VS_STATE_MASTER;
- strlcpy(d[0].mcast_ifn, ipvs->master_mcast_ifn,
- sizeof(d[0].mcast_ifn));
- d[0].syncid = ipvs->master_syncid;
- }
- if (ipvs->sync_state & IP_VS_STATE_BACKUP) {
- d[1].state = IP_VS_STATE_BACKUP;
- strlcpy(d[1].mcast_ifn, ipvs->backup_mcast_ifn,
- sizeof(d[1].mcast_ifn));
- d[1].syncid = ipvs->backup_syncid;
- }
- if (copy_to_user(user, &d, sizeof(d)) != 0)
- ret = -EFAULT;
- }
- break;
-
default:
ret = -EINVAL;
}
@@ -3205,7 +3220,7 @@
struct net *net = skb_sknet(skb);
struct netns_ipvs *ipvs = net_ipvs(net);
- mutex_lock(&__ip_vs_mutex);
+ mutex_lock(&ipvs->sync_mutex);
if ((ipvs->sync_state & IP_VS_STATE_MASTER) && !cb->args[0]) {
if (ip_vs_genl_dump_daemon(skb, IP_VS_STATE_MASTER,
ipvs->master_mcast_ifn,
@@ -3225,7 +3240,7 @@
}
nla_put_failure:
- mutex_unlock(&__ip_vs_mutex);
+ mutex_unlock(&ipvs->sync_mutex);
return skb->len;
}
@@ -3271,6 +3286,38 @@
return ip_vs_set_timeout(net, &t);
}
+static int ip_vs_genl_set_daemon(struct sk_buff *skb, struct genl_info *info)
+{
+ int ret = 0, cmd;
+ struct net *net;
+ struct netns_ipvs *ipvs;
+
+ net = skb_sknet(skb);
+ ipvs = net_ipvs(net);
+ cmd = info->genlhdr->cmd;
+
+ if (cmd == IPVS_CMD_NEW_DAEMON || cmd == IPVS_CMD_DEL_DAEMON) {
+ struct nlattr *daemon_attrs[IPVS_DAEMON_ATTR_MAX + 1];
+
+ mutex_lock(&ipvs->sync_mutex);
+ if (!info->attrs[IPVS_CMD_ATTR_DAEMON] ||
+ nla_parse_nested(daemon_attrs, IPVS_DAEMON_ATTR_MAX,
+ info->attrs[IPVS_CMD_ATTR_DAEMON],
+ ip_vs_daemon_policy)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (cmd == IPVS_CMD_NEW_DAEMON)
+ ret = ip_vs_genl_new_daemon(net, daemon_attrs);
+ else
+ ret = ip_vs_genl_del_daemon(net, daemon_attrs);
+out:
+ mutex_unlock(&ipvs->sync_mutex);
+ }
+ return ret;
+}
+
static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct ip_vs_service *svc = NULL;
@@ -3293,24 +3340,6 @@
} else if (cmd == IPVS_CMD_SET_CONFIG) {
ret = ip_vs_genl_set_config(net, info->attrs);
goto out;
- } else if (cmd == IPVS_CMD_NEW_DAEMON ||
- cmd == IPVS_CMD_DEL_DAEMON) {
-
- struct nlattr *daemon_attrs[IPVS_DAEMON_ATTR_MAX + 1];
-
- if (!info->attrs[IPVS_CMD_ATTR_DAEMON] ||
- nla_parse_nested(daemon_attrs, IPVS_DAEMON_ATTR_MAX,
- info->attrs[IPVS_CMD_ATTR_DAEMON],
- ip_vs_daemon_policy)) {
- ret = -EINVAL;
- goto out;
- }
-
- if (cmd == IPVS_CMD_NEW_DAEMON)
- ret = ip_vs_genl_new_daemon(net, daemon_attrs);
- else
- ret = ip_vs_genl_del_daemon(net, daemon_attrs);
- goto out;
} else if (cmd == IPVS_CMD_ZERO &&
!info->attrs[IPVS_CMD_ATTR_SERVICE]) {
ret = ip_vs_zero_all(net);
@@ -3536,13 +3565,13 @@
.cmd = IPVS_CMD_NEW_DAEMON,
.flags = GENL_ADMIN_PERM,
.policy = ip_vs_cmd_policy,
- .doit = ip_vs_genl_set_cmd,
+ .doit = ip_vs_genl_set_daemon,
},
{
.cmd = IPVS_CMD_DEL_DAEMON,
.flags = GENL_ADMIN_PERM,
.policy = ip_vs_cmd_policy,
- .doit = ip_vs_genl_set_cmd,
+ .doit = ip_vs_genl_set_daemon,
},
{
.cmd = IPVS_CMD_GET_DAEMON,
@@ -3679,7 +3708,7 @@
int idx;
struct netns_ipvs *ipvs = net_ipvs(net);
- ipvs->rs_lock = __RW_LOCK_UNLOCKED(ipvs->rs_lock);
+ rwlock_init(&ipvs->rs_lock);
/* Initialize rs_table */
for (idx = 0; idx < IP_VS_RTAB_SIZE; idx++)
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 7ee7215..3cdd479 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -61,6 +61,7 @@
#define SYNC_PROTO_VER 1 /* Protocol version in header */
+static struct lock_class_key __ipvs_sync_key;
/*
* IPVS sync connection entry
* Version 0, i.e. original version.
@@ -1545,6 +1546,7 @@
IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %Zd bytes\n",
sizeof(struct ip_vs_sync_conn_v0));
+
if (state == IP_VS_STATE_MASTER) {
if (ipvs->master_thread)
return -EEXIST;
@@ -1667,6 +1669,7 @@
{
struct netns_ipvs *ipvs = net_ipvs(net);
+ __mutex_init(&ipvs->sync_mutex, "ipvs->sync_mutex", &__ipvs_sync_key);
INIT_LIST_HEAD(&ipvs->sync_queue);
spin_lock_init(&ipvs->sync_lock);
spin_lock_init(&ipvs->sync_buff_lock);
@@ -1680,7 +1683,9 @@
void ip_vs_sync_net_cleanup(struct net *net)
{
int retc;
+ struct netns_ipvs *ipvs = net_ipvs(net);
+ mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(net, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -1688,4 +1693,5 @@
retc = stop_sync_thread(net, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
+ mutex_unlock(&ipvs->sync_mutex);
}
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index cf616e5..d69facd 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -241,8 +241,8 @@
nf_ct_refresh_acct(ct, ctinfo, skb,
ct->proto.gre.stream_timeout);
/* Also, more likely to be important, and not a probe. */
- set_bit(IPS_ASSURED_BIT, &ct->status);
- nf_conntrack_event_cache(IPCT_ASSURED, ct);
+ if (!test_and_set_bit(IPS_ASSURED_BIT, &ct->status))
+ nf_conntrack_event_cache(IPCT_ASSURED, ct);
} else
nf_ct_refresh_acct(ct, ctinfo, skb,
ct->proto.gre.timeout);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index d306154..5f03e4e 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -91,7 +91,7 @@
int needed;
int rc;
- if (skb->len < 1) {
+ if (!pskb_may_pull(skb, 1)) {
/* packet has no address block */
rc = 0;
goto empty;
@@ -100,7 +100,7 @@
len = *skb->data;
needed = 1 + (len >> 4) + (len & 0x0f);
- if (skb->len < needed) {
+ if (!pskb_may_pull(skb, needed)) {
/* packet is too short to hold the addresses it claims
to hold */
rc = -1;
@@ -295,7 +295,8 @@
* Found a listening socket, now check the incoming
* call user data vs this sockets call user data
*/
- if(skb->len > 0 && x25_sk(s)->cudmatchlength > 0) {
+ if (x25_sk(s)->cudmatchlength > 0 &&
+ skb->len >= x25_sk(s)->cudmatchlength) {
if((memcmp(x25_sk(s)->calluserdata.cuddata,
skb->data,
x25_sk(s)->cudmatchlength)) == 0) {
@@ -951,14 +952,27 @@
*
* Facilities length is mandatory in call request packets
*/
- if (skb->len < 1)
+ if (!pskb_may_pull(skb, 1))
goto out_clear_request;
len = skb->data[0] + 1;
- if (skb->len < len)
+ if (!pskb_may_pull(skb, len))
goto out_clear_request;
skb_pull(skb,len);
/*
+ * Ensure that the amount of call user data is valid.
+ */
+ if (skb->len > X25_MAX_CUD_LEN)
+ goto out_clear_request;
+
+ /*
+ * Get all the call user data so it can be used in
+ * x25_find_listener and skb_copy_from_linear_data up ahead.
+ */
+ if (!pskb_may_pull(skb, skb->len))
+ goto out_clear_request;
+
+ /*
* Find a listener for the particular address/cud pair.
*/
sk = x25_find_listener(&source_addr,skb);
@@ -1166,6 +1180,9 @@
* byte of the user data is the logical value of the Q Bit.
*/
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
+ if (!pskb_may_pull(skb, 1))
+ goto out_kfree_skb;
+
qbit = skb->data[0];
skb_pull(skb, 1);
}
@@ -1244,7 +1261,9 @@
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)msg->msg_name;
size_t copied;
- int qbit;
+ int qbit, header_len = x25->neighbour->extended ?
+ X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
+
struct sk_buff *skb;
unsigned char *asmptr;
int rc = -ENOTCONN;
@@ -1265,6 +1284,9 @@
skb = skb_dequeue(&x25->interrupt_in_queue);
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ goto out_free_dgram;
+
skb_pull(skb, X25_STD_MIN_LEN);
/*
@@ -1285,10 +1307,12 @@
if (!skb)
goto out;
+ if (!pskb_may_pull(skb, header_len))
+ goto out_free_dgram;
+
qbit = (skb->data[0] & X25_Q_BIT) == X25_Q_BIT;
- skb_pull(skb, x25->neighbour->extended ?
- X25_EXT_MIN_LEN : X25_STD_MIN_LEN);
+ skb_pull(skb, header_len);
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
asmptr = skb_push(skb, 1);
diff --git a/net/x25/x25_dev.c b/net/x25/x25_dev.c
index e547ca1..fa2b418 100644
--- a/net/x25/x25_dev.c
+++ b/net/x25/x25_dev.c
@@ -32,6 +32,9 @@
unsigned short frametype;
unsigned int lci;
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ return 0;
+
frametype = skb->data[2];
lci = ((skb->data[0] << 8) & 0xF00) + ((skb->data[1] << 0) & 0x0FF);
@@ -115,6 +118,9 @@
goto drop;
}
+ if (!pskb_may_pull(skb, 1))
+ return 0;
+
switch (skb->data[0]) {
case X25_IFACE_DATA:
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index f77e4e7..36384a1 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -44,7 +44,7 @@
int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
struct x25_dte_facilities *dte_facs, unsigned long *vc_fac_mask)
{
- unsigned char *p = skb->data;
+ unsigned char *p;
unsigned int len;
*vc_fac_mask = 0;
@@ -60,14 +60,16 @@
memset(dte_facs->called_ae, '\0', sizeof(dte_facs->called_ae));
memset(dte_facs->calling_ae, '\0', sizeof(dte_facs->calling_ae));
- if (skb->len < 1)
+ if (!pskb_may_pull(skb, 1))
return 0;
- len = *p++;
+ len = skb->data[0];
- if (len >= skb->len)
+ if (!pskb_may_pull(skb, 1 + len))
return -1;
+ p = skb->data + 1;
+
while (len > 0) {
switch (*p & X25_FAC_CLASS_MASK) {
case X25_FAC_CLASS_A:
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index 0b073b5..a49cd4e 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -107,6 +107,8 @@
/*
* Parse the data in the frame.
*/
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ goto out_clear;
skb_pull(skb, X25_STD_MIN_LEN);
len = x25_parse_address_block(skb, &source_addr,
@@ -127,9 +129,11 @@
* Copy any Call User Data.
*/
if (skb->len > 0) {
- skb_copy_from_linear_data(skb,
- x25->calluserdata.cuddata,
- skb->len);
+ if (skb->len > X25_MAX_CUD_LEN)
+ goto out_clear;
+
+ skb_copy_bits(skb, 0, x25->calluserdata.cuddata,
+ skb->len);
x25->calluserdata.cudlength = skb->len;
}
if (!sock_flag(sk, SOCK_DEAD))
@@ -137,6 +141,9 @@
break;
}
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, ECONNREFUSED, skb->data[3], skb->data[4]);
break;
@@ -164,6 +171,9 @@
switch (frametype) {
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -177,6 +187,11 @@
}
return 0;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25_start_t23timer(sk);
+ return 0;
}
/*
@@ -206,6 +221,9 @@
break;
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -304,6 +322,12 @@
}
return queued;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25->state = X25_STATE_2;
+ x25_start_t23timer(sk);
+ return 0;
}
/*
@@ -313,13 +337,13 @@
*/
static int x25_state4_machine(struct sock *sk, struct sk_buff *skb, int frametype)
{
+ struct x25_sock *x25 = x25_sk(sk);
+
switch (frametype) {
case X25_RESET_REQUEST:
x25_write_internal(sk, X25_RESET_CONFIRMATION);
case X25_RESET_CONFIRMATION: {
- struct x25_sock *x25 = x25_sk(sk);
-
x25_stop_timer(sk);
x25->condition = 0x00;
x25->va = 0;
@@ -331,6 +355,9 @@
break;
}
case X25_CLEAR_REQUEST:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 2))
+ goto out_clear;
+
x25_write_internal(sk, X25_CLEAR_CONFIRMATION);
x25_disconnect(sk, 0, skb->data[3], skb->data[4]);
break;
@@ -340,6 +367,12 @@
}
return 0;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25->state = X25_STATE_2;
+ x25_start_t23timer(sk);
+ return 0;
}
/* Higher level upcall for a LAPB frame */
diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 037958f..4acacf3 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -90,6 +90,9 @@
break;
case X25_DIAGNOSTIC:
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN + 4))
+ break;
+
printk(KERN_WARNING "x25: diagnostic #%d - %02X %02X %02X\n",
skb->data[3], skb->data[4],
skb->data[5], skb->data[6]);
diff --git a/net/x25/x25_subr.c b/net/x25/x25_subr.c
index 24a342e..5170d52 100644
--- a/net/x25/x25_subr.c
+++ b/net/x25/x25_subr.c
@@ -269,7 +269,11 @@
int *d, int *m)
{
struct x25_sock *x25 = x25_sk(sk);
- unsigned char *frame = skb->data;
+ unsigned char *frame;
+
+ if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
*ns = *nr = *q = *d = *m = 0;
@@ -294,6 +298,10 @@
if (frame[2] == X25_RR ||
frame[2] == X25_RNR ||
frame[2] == X25_REJ) {
+ if (!pskb_may_pull(skb, X25_EXT_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
+
*nr = (frame[3] >> 1) & 0x7F;
return frame[2];
}
@@ -308,6 +316,10 @@
if (x25->neighbour->extended) {
if ((frame[2] & 0x01) == X25_DATA) {
+ if (!pskb_may_pull(skb, X25_EXT_MIN_LEN))
+ return X25_ILLEGAL;
+ frame = skb->data;
+
*q = (frame[0] & X25_Q_BIT) == X25_Q_BIT;
*d = (frame[0] & X25_D_BIT) == X25_D_BIT;
*m = (frame[3] & X25_EXT_M_BIT) == X25_EXT_M_BIT;
diff --git a/security/security.c b/security/security.c
index 0e4fccf..d9e1533 100644
--- a/security/security.c
+++ b/security/security.c
@@ -1097,6 +1097,7 @@
{
security_ops->sk_clone_security(sk, newsk);
}
+EXPORT_SYMBOL(security_sk_clone);
void security_sk_classify_flow(struct sock *sk, struct flowi *fl)
{
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e9a2a87..191284a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2370,6 +2370,7 @@
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1028, 0x02c6, "Dell Inspiron 1010", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 7696d05..76752d8e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3110,6 +3110,7 @@
SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520 & W520", CXT5066_AUTO),
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS),