| /* |
| * abyss.c: Network driver for the Madge Smart 16/4 PCI Mk2 token ring card. |
| * |
| * Written 1999-2000 by Adam Fritzler |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * This driver module supports the following cards: |
| * - Madge Smart 16/4 PCI Mk2 |
| * |
| * Maintainer(s): |
| * AF Adam Fritzler mid@auk.cx |
| * |
| * Modification History: |
| * 30-Dec-99 AF Split off from the tms380tr driver. |
| * 22-Jan-00 AF Updated to use indirect read/writes |
| * 23-Nov-00 JG New PCI API, cleanups |
| * |
| * |
| * TODO: |
| * 1. See if we can use MMIO instead of inb/outb/inw/outw |
| * 2. Add support for Mk1 (has AT24 attached to the PCI |
| * config registers) |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/trdevice.h> |
| |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #include "tms380tr.h" |
| #include "abyss.h" /* Madge-specific constants */ |
| |
| static char version[] __devinitdata = |
| "abyss.c: v1.02 23/11/2000 by Adam Fritzler\n"; |
| |
| #define ABYSS_IO_EXTENT 64 |
| |
| static struct pci_device_id abyss_pci_tbl[] = { |
| { PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_MK2, |
| PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_TOKEN_RING << 8, 0x00ffffff, }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(pci, abyss_pci_tbl); |
| |
| MODULE_LICENSE("GPL"); |
| |
| static int abyss_open(struct net_device *dev); |
| static int abyss_close(struct net_device *dev); |
| static void abyss_enable(struct net_device *dev); |
| static int abyss_chipset_init(struct net_device *dev); |
| static void abyss_read_eeprom(struct net_device *dev); |
| static unsigned short abyss_setnselout_pins(struct net_device *dev); |
| |
| static void at24_writedatabyte(unsigned long regaddr, unsigned char byte); |
| static int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr); |
| static int at24_sendcmd(unsigned long regaddr, unsigned char cmd); |
| static unsigned char at24_readdatabit(unsigned long regaddr); |
| static unsigned char at24_readdatabyte(unsigned long regaddr); |
| static int at24_waitforack(unsigned long regaddr); |
| static int at24_waitfornack(unsigned long regaddr); |
| static void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data); |
| static void at24_start(unsigned long regaddr); |
| static unsigned char at24_readb(unsigned long regaddr, unsigned char addr); |
| |
| static unsigned short abyss_sifreadb(struct net_device *dev, unsigned short reg) |
| { |
| return inb(dev->base_addr + reg); |
| } |
| |
| static unsigned short abyss_sifreadw(struct net_device *dev, unsigned short reg) |
| { |
| return inw(dev->base_addr + reg); |
| } |
| |
| static void abyss_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) |
| { |
| outb(val, dev->base_addr + reg); |
| } |
| |
| static void abyss_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) |
| { |
| outw(val, dev->base_addr + reg); |
| } |
| |
| static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static int versionprinted; |
| struct net_device *dev; |
| struct net_local *tp; |
| int ret, pci_irq_line; |
| unsigned long pci_ioaddr; |
| DECLARE_MAC_BUF(mac); |
| |
| if (versionprinted++ == 0) |
| printk("%s", version); |
| |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| |
| /* Remove I/O space marker in bit 0. */ |
| pci_irq_line = pdev->irq; |
| pci_ioaddr = pci_resource_start (pdev, 0); |
| |
| /* At this point we have found a valid card. */ |
| |
| dev = alloc_trdev(sizeof(struct net_local)); |
| if (!dev) |
| return -ENOMEM; |
| |
| if (!request_region(pci_ioaddr, ABYSS_IO_EXTENT, dev->name)) { |
| ret = -EBUSY; |
| goto err_out_trdev; |
| } |
| |
| ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED, |
| dev->name, dev); |
| if (ret) |
| goto err_out_region; |
| |
| dev->base_addr = pci_ioaddr; |
| dev->irq = pci_irq_line; |
| |
| printk("%s: Madge Smart 16/4 PCI Mk2 (Abyss)\n", dev->name); |
| printk("%s: IO: %#4lx IRQ: %d\n", |
| dev->name, pci_ioaddr, dev->irq); |
| /* |
| * The TMS SIF registers lay 0x10 above the card base address. |
| */ |
| dev->base_addr += 0x10; |
| |
| ret = tmsdev_init(dev, &pdev->dev); |
| if (ret) { |
| printk("%s: unable to get memory for dev->priv.\n", |
| dev->name); |
| goto err_out_irq; |
| } |
| |
| abyss_read_eeprom(dev); |
| |
| printk("%s: Ring Station Address: %s\n", |
| dev->name, print_mac(mac, dev->dev_addr)); |
| |
| tp = netdev_priv(dev); |
| tp->setnselout = abyss_setnselout_pins; |
| tp->sifreadb = abyss_sifreadb; |
| tp->sifreadw = abyss_sifreadw; |
| tp->sifwriteb = abyss_sifwriteb; |
| tp->sifwritew = abyss_sifwritew; |
| |
| memcpy(tp->ProductID, "Madge PCI 16/4 Mk2", PROD_ID_SIZE + 1); |
| |
| dev->open = abyss_open; |
| dev->stop = abyss_close; |
| |
| pci_set_drvdata(pdev, dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| ret = register_netdev(dev); |
| if (ret) |
| goto err_out_tmsdev; |
| return 0; |
| |
| err_out_tmsdev: |
| pci_set_drvdata(pdev, NULL); |
| tmsdev_term(dev); |
| err_out_irq: |
| free_irq(pdev->irq, dev); |
| err_out_region: |
| release_region(pci_ioaddr, ABYSS_IO_EXTENT); |
| err_out_trdev: |
| free_netdev(dev); |
| return ret; |
| } |
| |
| static unsigned short abyss_setnselout_pins(struct net_device *dev) |
| { |
| unsigned short val = 0; |
| struct net_local *tp = netdev_priv(dev); |
| |
| if(tp->DataRate == SPEED_4) |
| val |= 0x01; /* Set 4Mbps */ |
| else |
| val |= 0x00; /* Set 16Mbps */ |
| |
| return val; |
| } |
| |
| /* |
| * The following Madge boards should use this code: |
| * - Smart 16/4 PCI Mk2 (Abyss) |
| * - Smart 16/4 PCI Mk1 (PCI T) |
| * - Smart 16/4 Client Plus PnP (Big Apple) |
| * - Smart 16/4 Cardbus Mk2 |
| * |
| * These access an Atmel AT24 SEEPROM using their glue chip registers. |
| * |
| */ |
| static void at24_writedatabyte(unsigned long regaddr, unsigned char byte) |
| { |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| at24_setlines(regaddr, 0, (byte >> (7-i))&0x01); |
| at24_setlines(regaddr, 1, (byte >> (7-i))&0x01); |
| at24_setlines(regaddr, 0, (byte >> (7-i))&0x01); |
| } |
| } |
| |
| static int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr) |
| { |
| if (at24_sendcmd(regaddr, cmd)) { |
| at24_writedatabyte(regaddr, addr); |
| return at24_waitforack(regaddr); |
| } |
| return 0; |
| } |
| |
| static int at24_sendcmd(unsigned long regaddr, unsigned char cmd) |
| { |
| int i; |
| |
| for (i = 0; i < 10; i++) { |
| at24_start(regaddr); |
| at24_writedatabyte(regaddr, cmd); |
| if (at24_waitforack(regaddr)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static unsigned char at24_readdatabit(unsigned long regaddr) |
| { |
| unsigned char val; |
| |
| at24_setlines(regaddr, 0, 1); |
| at24_setlines(regaddr, 1, 1); |
| val = (inb(regaddr) & AT24_DATA)?1:0; |
| at24_setlines(regaddr, 1, 1); |
| at24_setlines(regaddr, 0, 1); |
| return val; |
| } |
| |
| static unsigned char at24_readdatabyte(unsigned long regaddr) |
| { |
| unsigned char data = 0; |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| data <<= 1; |
| data |= at24_readdatabit(regaddr); |
| } |
| |
| return data; |
| } |
| |
| static int at24_waitforack(unsigned long regaddr) |
| { |
| int i; |
| |
| for (i = 0; i < 10; i++) { |
| if ((at24_readdatabit(regaddr) & 0x01) == 0x00) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int at24_waitfornack(unsigned long regaddr) |
| { |
| int i; |
| for (i = 0; i < 10; i++) { |
| if ((at24_readdatabit(regaddr) & 0x01) == 0x01) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data) |
| { |
| unsigned char val = AT24_ENABLE; |
| if (clock) |
| val |= AT24_CLOCK; |
| if (data) |
| val |= AT24_DATA; |
| |
| outb(val, regaddr); |
| tms380tr_wait(20); /* Very necessary. */ |
| } |
| |
| static void at24_start(unsigned long regaddr) |
| { |
| at24_setlines(regaddr, 0, 1); |
| at24_setlines(regaddr, 1, 1); |
| at24_setlines(regaddr, 1, 0); |
| at24_setlines(regaddr, 0, 1); |
| } |
| |
| static unsigned char at24_readb(unsigned long regaddr, unsigned char addr) |
| { |
| unsigned char data = 0xff; |
| |
| if (at24_sendfullcmd(regaddr, AT24_WRITE, addr)) { |
| if (at24_sendcmd(regaddr, AT24_READ)) { |
| data = at24_readdatabyte(regaddr); |
| if (!at24_waitfornack(regaddr)) |
| data = 0xff; |
| } |
| } |
| return data; |
| } |
| |
| |
| /* |
| * Enable basic functions of the Madge chipset needed |
| * for initialization. |
| */ |
| static void abyss_enable(struct net_device *dev) |
| { |
| unsigned char reset_reg; |
| unsigned long ioaddr; |
| |
| ioaddr = dev->base_addr; |
| reset_reg = inb(ioaddr + PCIBM2_RESET_REG); |
| reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| tms380tr_wait(100); |
| } |
| |
| /* |
| * Enable the functions of the Madge chipset needed for |
| * full working order. |
| */ |
| static int abyss_chipset_init(struct net_device *dev) |
| { |
| unsigned char reset_reg; |
| unsigned long ioaddr; |
| |
| ioaddr = dev->base_addr; |
| |
| reset_reg = inb(ioaddr + PCIBM2_RESET_REG); |
| |
| reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| |
| reset_reg &= ~(PCIBM2_RESET_REG_CHIP_NRES | |
| PCIBM2_RESET_REG_FIFO_NRES | |
| PCIBM2_RESET_REG_SIF_NRES); |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| |
| tms380tr_wait(100); |
| |
| reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| |
| reset_reg |= PCIBM2_RESET_REG_SIF_NRES; |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| |
| reset_reg |= PCIBM2_RESET_REG_FIFO_NRES; |
| outb(reset_reg, ioaddr + PCIBM2_RESET_REG); |
| |
| outb(PCIBM2_INT_CONTROL_REG_SINTEN | |
| PCIBM2_INT_CONTROL_REG_PCI_ERR_ENABLE, |
| ioaddr + PCIBM2_INT_CONTROL_REG); |
| |
| outb(30, ioaddr + PCIBM2_FIFO_THRESHOLD); |
| |
| return 0; |
| } |
| |
| static inline void abyss_chipset_close(struct net_device *dev) |
| { |
| unsigned long ioaddr; |
| |
| ioaddr = dev->base_addr; |
| outb(0, ioaddr + PCIBM2_RESET_REG); |
| } |
| |
| /* |
| * Read configuration data from the AT24 SEEPROM on Madge cards. |
| * |
| */ |
| static void abyss_read_eeprom(struct net_device *dev) |
| { |
| struct net_local *tp; |
| unsigned long ioaddr; |
| unsigned short val; |
| int i; |
| |
| tp = netdev_priv(dev); |
| ioaddr = dev->base_addr; |
| |
| /* Must enable glue chip first */ |
| abyss_enable(dev); |
| |
| val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, |
| PCIBM2_SEEPROM_RING_SPEED); |
| tp->DataRate = val?SPEED_4:SPEED_16; /* set open speed */ |
| printk("%s: SEEPROM: ring speed: %dMb/sec\n", dev->name, tp->DataRate); |
| |
| val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, |
| PCIBM2_SEEPROM_RAM_SIZE) * 128; |
| printk("%s: SEEPROM: adapter RAM: %dkb\n", dev->name, val); |
| |
| dev->addr_len = 6; |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, |
| PCIBM2_SEEPROM_BIA+i); |
| } |
| |
| static int abyss_open(struct net_device *dev) |
| { |
| abyss_chipset_init(dev); |
| tms380tr_open(dev); |
| return 0; |
| } |
| |
| static int abyss_close(struct net_device *dev) |
| { |
| tms380tr_close(dev); |
| abyss_chipset_close(dev); |
| return 0; |
| } |
| |
| static void __devexit abyss_detach (struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| BUG_ON(!dev); |
| unregister_netdev(dev); |
| release_region(dev->base_addr-0x10, ABYSS_IO_EXTENT); |
| free_irq(dev->irq, dev); |
| tmsdev_term(dev); |
| free_netdev(dev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| static struct pci_driver abyss_driver = { |
| .name = "abyss", |
| .id_table = abyss_pci_tbl, |
| .probe = abyss_attach, |
| .remove = __devexit_p(abyss_detach), |
| }; |
| |
| static int __init abyss_init (void) |
| { |
| return pci_register_driver(&abyss_driver); |
| } |
| |
| static void __exit abyss_rmmod (void) |
| { |
| pci_unregister_driver (&abyss_driver); |
| } |
| |
| module_init(abyss_init); |
| module_exit(abyss_rmmod); |
| |