| /* |
| * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> |
| * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> |
| * |
| * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, |
| * but this keeps the ISA-Bridge and slots alive. |
| * |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #include <linux/init.h> |
| |
| #define DRV_NAME "slc90e66" |
| |
| static DEFINE_SPINLOCK(slc90e66_lock); |
| |
| static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| int is_slave = drive->dn & 1; |
| int master_port = hwif->channel ? 0x42 : 0x40; |
| int slave_port = 0x44; |
| unsigned long flags; |
| u16 master_data; |
| u8 slave_data; |
| int control = 0; |
| /* ISP RTC */ |
| static const u8 timings[][2] = { |
| { 0, 0 }, |
| { 0, 0 }, |
| { 1, 0 }, |
| { 2, 1 }, |
| { 2, 3 }, }; |
| |
| spin_lock_irqsave(&slc90e66_lock, flags); |
| pci_read_config_word(dev, master_port, &master_data); |
| |
| if (pio > 1) |
| control |= 1; /* Programmable timing on */ |
| if (drive->media == ide_disk) |
| control |= 4; /* Prefetch, post write */ |
| if (pio > 2) |
| control |= 2; /* IORDY */ |
| if (is_slave) { |
| master_data |= 0x4000; |
| master_data &= ~0x0070; |
| if (pio > 1) { |
| /* Set PPE, IE and TIME */ |
| master_data |= control << 4; |
| } |
| pci_read_config_byte(dev, slave_port, &slave_data); |
| slave_data &= hwif->channel ? 0x0f : 0xf0; |
| slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << |
| (hwif->channel ? 4 : 0); |
| } else { |
| master_data &= ~0x3307; |
| if (pio > 1) { |
| /* enable PPE, IE and TIME */ |
| master_data |= control; |
| } |
| master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); |
| } |
| pci_write_config_word(dev, master_port, master_data); |
| if (is_slave) |
| pci_write_config_byte(dev, slave_port, slave_data); |
| spin_unlock_irqrestore(&slc90e66_lock, flags); |
| } |
| |
| static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| u8 maslave = hwif->channel ? 0x42 : 0x40; |
| int sitre = 0, a_speed = 7 << (drive->dn * 4); |
| int u_speed = 0, u_flag = 1 << drive->dn; |
| u16 reg4042, reg44, reg48, reg4a; |
| |
| pci_read_config_word(dev, maslave, ®4042); |
| sitre = (reg4042 & 0x4000) ? 1 : 0; |
| pci_read_config_word(dev, 0x44, ®44); |
| pci_read_config_word(dev, 0x48, ®48); |
| pci_read_config_word(dev, 0x4a, ®4a); |
| |
| if (speed >= XFER_UDMA_0) { |
| u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4); |
| |
| if (!(reg48 & u_flag)) |
| pci_write_config_word(dev, 0x48, reg48|u_flag); |
| /* FIXME: (reg4a & a_speed) ? */ |
| if ((reg4a & u_speed) != u_speed) { |
| pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); |
| pci_read_config_word(dev, 0x4a, ®4a); |
| pci_write_config_word(dev, 0x4a, reg4a|u_speed); |
| } |
| } else { |
| const u8 mwdma_to_pio[] = { 0, 3, 4 }; |
| u8 pio; |
| |
| if (reg48 & u_flag) |
| pci_write_config_word(dev, 0x48, reg48 & ~u_flag); |
| if (reg4a & a_speed) |
| pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); |
| |
| if (speed >= XFER_MW_DMA_0) |
| pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; |
| else |
| pio = 2; /* only SWDMA2 is allowed */ |
| |
| slc90e66_set_pio_mode(drive, pio); |
| } |
| } |
| |
| static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif) |
| { |
| struct pci_dev *dev = to_pci_dev(hwif->dev); |
| u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02; |
| |
| pci_read_config_byte(dev, 0x47, ®47); |
| |
| /* bit[0(1)]: 0:80, 1:40 */ |
| return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; |
| } |
| |
| static const struct ide_port_ops slc90e66_port_ops = { |
| .set_pio_mode = slc90e66_set_pio_mode, |
| .set_dma_mode = slc90e66_set_dma_mode, |
| .cable_detect = slc90e66_cable_detect, |
| }; |
| |
| static const struct ide_port_info slc90e66_chipset __devinitdata = { |
| .name = DRV_NAME, |
| .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, |
| .port_ops = &slc90e66_port_ops, |
| .host_flags = IDE_HFLAG_LEGACY_IRQS, |
| .pio_mask = ATA_PIO4, |
| .swdma_mask = ATA_SWDMA2_ONLY, |
| .mwdma_mask = ATA_MWDMA12_ONLY, |
| .udma_mask = ATA_UDMA4, |
| }; |
| |
| static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| return ide_pci_init_one(dev, &slc90e66_chipset, NULL); |
| } |
| |
| static const struct pci_device_id slc90e66_pci_tbl[] = { |
| { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl); |
| |
| static struct pci_driver driver = { |
| .name = "SLC90e66_IDE", |
| .id_table = slc90e66_pci_tbl, |
| .probe = slc90e66_init_one, |
| .remove = ide_pci_remove, |
| }; |
| |
| static int __init slc90e66_ide_init(void) |
| { |
| return ide_pci_register_driver(&driver); |
| } |
| |
| static void __exit slc90e66_ide_exit(void) |
| { |
| pci_unregister_driver(&driver); |
| } |
| |
| module_init(slc90e66_ide_init); |
| module_exit(slc90e66_ide_exit); |
| |
| MODULE_AUTHOR("Andre Hedrick"); |
| MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE"); |
| MODULE_LICENSE("GPL"); |