| /* interrupt.h */ |
| #ifndef _LINUX_INTERRUPT_H |
| #define _LINUX_INTERRUPT_H |
| |
| #include <linux/kernel.h> |
| #include <linux/linkage.h> |
| #include <linux/bitops.h> |
| #include <linux/preempt.h> |
| #include <linux/cpumask.h> |
| #include <linux/irqreturn.h> |
| #include <linux/irqnr.h> |
| #include <linux/hardirq.h> |
| #include <linux/irqflags.h> |
| #include <linux/smp.h> |
| #include <linux/percpu.h> |
| #include <linux/hrtimer.h> |
| #include <linux/kref.h> |
| #include <linux/workqueue.h> |
| |
| #include <asm/atomic.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <trace/events/irq.h> |
| |
| /* |
| * These correspond to the IORESOURCE_IRQ_* defines in |
| * linux/ioport.h to select the interrupt line behaviour. When |
| * requesting an interrupt without specifying a IRQF_TRIGGER, the |
| * setting should be assumed to be "as already configured", which |
| * may be as per machine or firmware initialisation. |
| */ |
| #define IRQF_TRIGGER_NONE 0x00000000 |
| #define IRQF_TRIGGER_RISING 0x00000001 |
| #define IRQF_TRIGGER_FALLING 0x00000002 |
| #define IRQF_TRIGGER_HIGH 0x00000004 |
| #define IRQF_TRIGGER_LOW 0x00000008 |
| #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \ |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) |
| #define IRQF_TRIGGER_PROBE 0x00000010 |
| |
| /* |
| * These flags used only by the kernel as part of the |
| * irq handling routines. |
| * |
| * IRQF_DISABLED - keep irqs disabled when calling the action handler. |
| * DEPRECATED. This flag is a NOOP and scheduled to be removed |
| * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator |
| * IRQF_SHARED - allow sharing the irq among several devices |
| * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur |
| * IRQF_TIMER - Flag to mark this interrupt as timer interrupt |
| * IRQF_PERCPU - Interrupt is per cpu |
| * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing |
| * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is |
| * registered first in an shared interrupt is considered for |
| * performance reasons) |
| * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished. |
| * Used by threaded interrupts which need to keep the |
| * irq line disabled until the threaded handler has been run. |
| * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend |
| * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set |
| * IRQF_NO_THREAD - Interrupt cannot be threaded |
| */ |
| #define IRQF_DISABLED 0x00000020 |
| #define IRQF_SAMPLE_RANDOM 0x00000040 |
| #define IRQF_SHARED 0x00000080 |
| #define IRQF_PROBE_SHARED 0x00000100 |
| #define __IRQF_TIMER 0x00000200 |
| #define IRQF_PERCPU 0x00000400 |
| #define IRQF_NOBALANCING 0x00000800 |
| #define IRQF_IRQPOLL 0x00001000 |
| #define IRQF_ONESHOT 0x00002000 |
| #define IRQF_NO_SUSPEND 0x00004000 |
| #define IRQF_FORCE_RESUME 0x00008000 |
| #define IRQF_NO_THREAD 0x00010000 |
| |
| #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) |
| |
| /* |
| * These values can be returned by request_any_context_irq() and |
| * describe the context the interrupt will be run in. |
| * |
| * IRQC_IS_HARDIRQ - interrupt runs in hardirq context |
| * IRQC_IS_NESTED - interrupt runs in a nested threaded context |
| */ |
| enum { |
| IRQC_IS_HARDIRQ = 0, |
| IRQC_IS_NESTED, |
| }; |
| |
| typedef irqreturn_t (*irq_handler_t)(int, void *); |
| |
| /** |
| * struct irqaction - per interrupt action descriptor |
| * @handler: interrupt handler function |
| * @flags: flags (see IRQF_* above) |
| * @name: name of the device |
| * @dev_id: cookie to identify the device |
| * @next: pointer to the next irqaction for shared interrupts |
| * @irq: interrupt number |
| * @dir: pointer to the proc/irq/NN/name entry |
| * @thread_fn: interrupt handler function for threaded interrupts |
| * @thread: thread pointer for threaded interrupts |
| * @thread_flags: flags related to @thread |
| * @thread_mask: bitmask for keeping track of @thread activity |
| */ |
| struct irqaction { |
| irq_handler_t handler; |
| unsigned long flags; |
| void *dev_id; |
| struct irqaction *next; |
| int irq; |
| irq_handler_t thread_fn; |
| struct task_struct *thread; |
| unsigned long thread_flags; |
| unsigned long thread_mask; |
| const char *name; |
| struct proc_dir_entry *dir; |
| } ____cacheline_internodealigned_in_smp; |
| |
| extern irqreturn_t no_action(int cpl, void *dev_id); |
| |
| #ifdef CONFIG_GENERIC_HARDIRQS |
| extern int __must_check |
| request_threaded_irq(unsigned int irq, irq_handler_t handler, |
| irq_handler_t thread_fn, |
| unsigned long flags, const char *name, void *dev); |
| |
| static inline int __must_check |
| request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, |
| const char *name, void *dev) |
| { |
| return request_threaded_irq(irq, handler, NULL, flags, name, dev); |
| } |
| |
| extern int __must_check |
| request_any_context_irq(unsigned int irq, irq_handler_t handler, |
| unsigned long flags, const char *name, void *dev_id); |
| |
| extern void exit_irq_thread(void); |
| #else |
| |
| extern int __must_check |
| request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, |
| const char *name, void *dev); |
| |
| /* |
| * Special function to avoid ifdeffery in kernel/irq/devres.c which |
| * gets magically built by GENERIC_HARDIRQS=n architectures (sparc, |
| * m68k). I really love these $@%#!* obvious Makefile references: |
| * ../../../kernel/irq/devres.o |
| */ |
| static inline int __must_check |
| request_threaded_irq(unsigned int irq, irq_handler_t handler, |
| irq_handler_t thread_fn, |
| unsigned long flags, const char *name, void *dev) |
| { |
| return request_irq(irq, handler, flags, name, dev); |
| } |
| |
| static inline int __must_check |
| request_any_context_irq(unsigned int irq, irq_handler_t handler, |
| unsigned long flags, const char *name, void *dev_id) |
| { |
| return request_irq(irq, handler, flags, name, dev_id); |
| } |
| |
| static inline void exit_irq_thread(void) { } |
| #endif |
| |
| extern void free_irq(unsigned int, void *); |
| |
| struct device; |
| |
| extern int __must_check |
| devm_request_threaded_irq(struct device *dev, unsigned int irq, |
| irq_handler_t handler, irq_handler_t thread_fn, |
| unsigned long irqflags, const char *devname, |
| void *dev_id); |
| |
| static inline int __must_check |
| devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, |
| unsigned long irqflags, const char *devname, void *dev_id) |
| { |
| return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags, |
| devname, dev_id); |
| } |
| |
| extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); |
| |
| /* |
| * On lockdep we dont want to enable hardirqs in hardirq |
| * context. Use local_irq_enable_in_hardirq() to annotate |
| * kernel code that has to do this nevertheless (pretty much |
| * the only valid case is for old/broken hardware that is |
| * insanely slow). |
| * |
| * NOTE: in theory this might break fragile code that relies |
| * on hardirq delivery - in practice we dont seem to have such |
| * places left. So the only effect should be slightly increased |
| * irqs-off latencies. |
| */ |
| #ifdef CONFIG_LOCKDEP |
| # define local_irq_enable_in_hardirq() do { } while (0) |
| #else |
| # define local_irq_enable_in_hardirq() local_irq_enable() |
| #endif |
| |
| extern void disable_irq_nosync(unsigned int irq); |
| extern void disable_irq(unsigned int irq); |
| extern void enable_irq(unsigned int irq); |
| |
| /* The following three functions are for the core kernel use only. */ |
| #ifdef CONFIG_GENERIC_HARDIRQS |
| extern void suspend_device_irqs(void); |
| extern void resume_device_irqs(void); |
| #ifdef CONFIG_PM_SLEEP |
| extern int check_wakeup_irqs(void); |
| #else |
| static inline int check_wakeup_irqs(void) { return 0; } |
| #endif |
| #else |
| static inline void suspend_device_irqs(void) { }; |
| static inline void resume_device_irqs(void) { }; |
| static inline int check_wakeup_irqs(void) { return 0; } |
| #endif |
| |
| #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) |
| |
| extern cpumask_var_t irq_default_affinity; |
| |
| extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask); |
| extern int irq_can_set_affinity(unsigned int irq); |
| extern int irq_select_affinity(unsigned int irq); |
| |
| extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m); |
| |
| /** |
| * struct irq_affinity_notify - context for notification of IRQ affinity changes |
| * @irq: Interrupt to which notification applies |
| * @kref: Reference count, for internal use |
| * @work: Work item, for internal use |
| * @notify: Function to be called on change. This will be |
| * called in process context. |
| * @release: Function to be called on release. This will be |
| * called in process context. Once registered, the |
| * structure must only be freed when this function is |
| * called or later. |
| */ |
| struct irq_affinity_notify { |
| unsigned int irq; |
| struct kref kref; |
| struct work_struct work; |
| void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask); |
| void (*release)(struct kref *ref); |
| }; |
| |
| extern int |
| irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify); |
| |
| static inline void irq_run_affinity_notifiers(void) |
| { |
| flush_scheduled_work(); |
| } |
| |
| #else /* CONFIG_SMP */ |
| |
| static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m) |
| { |
| return -EINVAL; |
| } |
| |
| static inline int irq_can_set_affinity(unsigned int irq) |
| { |
| return 0; |
| } |
| |
| static inline int irq_select_affinity(unsigned int irq) { return 0; } |
| |
| static inline int irq_set_affinity_hint(unsigned int irq, |
| const struct cpumask *m) |
| { |
| return -EINVAL; |
| } |
| #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */ |
| |
| #ifdef CONFIG_GENERIC_HARDIRQS |
| /* |
| * Special lockdep variants of irq disabling/enabling. |
| * These should be used for locking constructs that |
| * know that a particular irq context which is disabled, |
| * and which is the only irq-context user of a lock, |
| * that it's safe to take the lock in the irq-disabled |
| * section without disabling hardirqs. |
| * |
| * On !CONFIG_LOCKDEP they are equivalent to the normal |
| * irq disable/enable methods. |
| */ |
| static inline void disable_irq_nosync_lockdep(unsigned int irq) |
| { |
| disable_irq_nosync(irq); |
| #ifdef CONFIG_LOCKDEP |
| local_irq_disable(); |
| #endif |
| } |
| |
| static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags) |
| { |
| disable_irq_nosync(irq); |
| #ifdef CONFIG_LOCKDEP |
| local_irq_save(*flags); |
| #endif |
| } |
| |
| static inline void disable_irq_lockdep(unsigned int irq) |
| { |
| disable_irq(irq); |
| #ifdef CONFIG_LOCKDEP |
| local_irq_disable(); |
| #endif |
| } |
| |
| static inline void enable_irq_lockdep(unsigned int irq) |
| { |
| #ifdef CONFIG_LOCKDEP |
| local_irq_enable(); |
| #endif |
| enable_irq(irq); |
| } |
| |
| static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags) |
| { |
| #ifdef CONFIG_LOCKDEP |
| local_irq_restore(*flags); |
| #endif |
| enable_irq(irq); |
| } |
| |
| /* IRQ wakeup (PM) control: */ |
| extern int irq_set_irq_wake(unsigned int irq, unsigned int on); |
| extern int irq_read_line(unsigned int irq); |
| |
| static inline int enable_irq_wake(unsigned int irq) |
| { |
| return irq_set_irq_wake(irq, 1); |
| } |
| |
| static inline int disable_irq_wake(unsigned int irq) |
| { |
| return irq_set_irq_wake(irq, 0); |
| } |
| |
| #else /* !CONFIG_GENERIC_HARDIRQS */ |
| /* |
| * NOTE: non-genirq architectures, if they want to support the lock |
| * validator need to define the methods below in their asm/irq.h |
| * files, under an #ifdef CONFIG_LOCKDEP section. |
| */ |
| #ifndef CONFIG_LOCKDEP |
| # define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq) |
| # define disable_irq_nosync_lockdep_irqsave(irq, flags) \ |
| disable_irq_nosync(irq) |
| # define disable_irq_lockdep(irq) disable_irq(irq) |
| # define enable_irq_lockdep(irq) enable_irq(irq) |
| # define enable_irq_lockdep_irqrestore(irq, flags) \ |
| enable_irq(irq) |
| # endif |
| |
| static inline int enable_irq_wake(unsigned int irq) |
| { |
| return 0; |
| } |
| |
| static inline int disable_irq_wake(unsigned int irq) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_GENERIC_HARDIRQS */ |
| |
| |
| #ifdef CONFIG_IRQ_FORCED_THREADING |
| extern bool force_irqthreads; |
| #else |
| #define force_irqthreads (0) |
| #endif |
| |
| #ifndef __ARCH_SET_SOFTIRQ_PENDING |
| #define set_softirq_pending(x) (local_softirq_pending() = (x)) |
| #define or_softirq_pending(x) (local_softirq_pending() |= (x)) |
| #endif |
| |
| /* Some architectures might implement lazy enabling/disabling of |
| * interrupts. In some cases, such as stop_machine, we might want |
| * to ensure that after a local_irq_disable(), interrupts have |
| * really been disabled in hardware. Such architectures need to |
| * implement the following hook. |
| */ |
| #ifndef hard_irq_disable |
| #define hard_irq_disable() do { } while(0) |
| #endif |
| |
| /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high |
| frequency threaded job scheduling. For almost all the purposes |
| tasklets are more than enough. F.e. all serial device BHs et |
| al. should be converted to tasklets, not to softirqs. |
| */ |
| |
| enum |
| { |
| HI_SOFTIRQ=0, |
| TIMER_SOFTIRQ, |
| NET_TX_SOFTIRQ, |
| NET_RX_SOFTIRQ, |
| BLOCK_SOFTIRQ, |
| BLOCK_IOPOLL_SOFTIRQ, |
| TASKLET_SOFTIRQ, |
| SCHED_SOFTIRQ, |
| HRTIMER_SOFTIRQ, |
| RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ |
| |
| NR_SOFTIRQS |
| }; |
| |
| /* map softirq index to softirq name. update 'softirq_to_name' in |
| * kernel/softirq.c when adding a new softirq. |
| */ |
| extern char *softirq_to_name[NR_SOFTIRQS]; |
| |
| /* softirq mask and active fields moved to irq_cpustat_t in |
| * asm/hardirq.h to get better cache usage. KAO |
| */ |
| |
| struct softirq_action |
| { |
| void (*action)(struct softirq_action *); |
| }; |
| |
| asmlinkage void do_softirq(void); |
| asmlinkage void __do_softirq(void); |
| extern void open_softirq(int nr, void (*action)(struct softirq_action *)); |
| extern void softirq_init(void); |
| static inline void __raise_softirq_irqoff(unsigned int nr) |
| { |
| trace_softirq_raise(nr); |
| or_softirq_pending(1UL << nr); |
| } |
| |
| extern void raise_softirq_irqoff(unsigned int nr); |
| extern void raise_softirq(unsigned int nr); |
| |
| /* This is the worklist that queues up per-cpu softirq work. |
| * |
| * send_remote_sendirq() adds work to these lists, and |
| * the softirq handler itself dequeues from them. The queues |
| * are protected by disabling local cpu interrupts and they must |
| * only be accessed by the local cpu that they are for. |
| */ |
| DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list); |
| |
| DECLARE_PER_CPU(struct task_struct *, ksoftirqd); |
| |
| static inline struct task_struct *this_cpu_ksoftirqd(void) |
| { |
| return this_cpu_read(ksoftirqd); |
| } |
| |
| /* Try to send a softirq to a remote cpu. If this cannot be done, the |
| * work will be queued to the local cpu. |
| */ |
| extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq); |
| |
| /* Like send_remote_softirq(), but the caller must disable local cpu interrupts |
| * and compute the current cpu, passed in as 'this_cpu'. |
| */ |
| extern void __send_remote_softirq(struct call_single_data *cp, int cpu, |
| int this_cpu, int softirq); |
| |
| /* Tasklets --- multithreaded analogue of BHs. |
| |
| Main feature differing them of generic softirqs: tasklet |
| is running only on one CPU simultaneously. |
| |
| Main feature differing them of BHs: different tasklets |
| may be run simultaneously on different CPUs. |
| |
| Properties: |
| * If tasklet_schedule() is called, then tasklet is guaranteed |
| to be executed on some cpu at least once after this. |
| * If the tasklet is already scheduled, but its execution is still not |
| started, it will be executed only once. |
| * If this tasklet is already running on another CPU (or schedule is called |
| from tasklet itself), it is rescheduled for later. |
| * Tasklet is strictly serialized wrt itself, but not |
| wrt another tasklets. If client needs some intertask synchronization, |
| he makes it with spinlocks. |
| */ |
| |
| struct tasklet_struct |
| { |
| struct tasklet_struct *next; |
| unsigned long state; |
| atomic_t count; |
| void (*func)(unsigned long); |
| unsigned long data; |
| }; |
| |
| #define DECLARE_TASKLET(name, func, data) \ |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } |
| |
| #define DECLARE_TASKLET_DISABLED(name, func, data) \ |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } |
| |
| |
| enum |
| { |
| TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */ |
| TASKLET_STATE_RUN /* Tasklet is running (SMP only) */ |
| }; |
| |
| #ifdef CONFIG_SMP |
| static inline int tasklet_trylock(struct tasklet_struct *t) |
| { |
| return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state); |
| } |
| |
| static inline void tasklet_unlock(struct tasklet_struct *t) |
| { |
| smp_mb__before_clear_bit(); |
| clear_bit(TASKLET_STATE_RUN, &(t)->state); |
| } |
| |
| static inline void tasklet_unlock_wait(struct tasklet_struct *t) |
| { |
| while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); } |
| } |
| #else |
| #define tasklet_trylock(t) 1 |
| #define tasklet_unlock_wait(t) do { } while (0) |
| #define tasklet_unlock(t) do { } while (0) |
| #endif |
| |
| extern void __tasklet_schedule(struct tasklet_struct *t); |
| |
| static inline void tasklet_schedule(struct tasklet_struct *t) |
| { |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) |
| __tasklet_schedule(t); |
| } |
| |
| extern void __tasklet_hi_schedule(struct tasklet_struct *t); |
| |
| static inline void tasklet_hi_schedule(struct tasklet_struct *t) |
| { |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) |
| __tasklet_hi_schedule(t); |
| } |
| |
| extern void __tasklet_hi_schedule_first(struct tasklet_struct *t); |
| |
| /* |
| * This version avoids touching any other tasklets. Needed for kmemcheck |
| * in order not to take any page faults while enqueueing this tasklet; |
| * consider VERY carefully whether you really need this or |
| * tasklet_hi_schedule()... |
| */ |
| static inline void tasklet_hi_schedule_first(struct tasklet_struct *t) |
| { |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) |
| __tasklet_hi_schedule_first(t); |
| } |
| |
| |
| static inline void tasklet_disable_nosync(struct tasklet_struct *t) |
| { |
| atomic_inc(&t->count); |
| smp_mb__after_atomic_inc(); |
| } |
| |
| static inline void tasklet_disable(struct tasklet_struct *t) |
| { |
| tasklet_disable_nosync(t); |
| tasklet_unlock_wait(t); |
| smp_mb(); |
| } |
| |
| static inline void tasklet_enable(struct tasklet_struct *t) |
| { |
| smp_mb__before_atomic_dec(); |
| atomic_dec(&t->count); |
| } |
| |
| static inline void tasklet_hi_enable(struct tasklet_struct *t) |
| { |
| smp_mb__before_atomic_dec(); |
| atomic_dec(&t->count); |
| } |
| |
| extern void tasklet_kill(struct tasklet_struct *t); |
| extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); |
| extern void tasklet_init(struct tasklet_struct *t, |
| void (*func)(unsigned long), unsigned long data); |
| |
| struct tasklet_hrtimer { |
| struct hrtimer timer; |
| struct tasklet_struct tasklet; |
| enum hrtimer_restart (*function)(struct hrtimer *); |
| }; |
| |
| extern void |
| tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, |
| enum hrtimer_restart (*function)(struct hrtimer *), |
| clockid_t which_clock, enum hrtimer_mode mode); |
| |
| static inline |
| int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, |
| const enum hrtimer_mode mode) |
| { |
| return hrtimer_start(&ttimer->timer, time, mode); |
| } |
| |
| static inline |
| void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer) |
| { |
| hrtimer_cancel(&ttimer->timer); |
| tasklet_kill(&ttimer->tasklet); |
| } |
| |
| /* |
| * Autoprobing for irqs: |
| * |
| * probe_irq_on() and probe_irq_off() provide robust primitives |
| * for accurate IRQ probing during kernel initialization. They are |
| * reasonably simple to use, are not "fooled" by spurious interrupts, |
| * and, unlike other attempts at IRQ probing, they do not get hung on |
| * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards). |
| * |
| * For reasonably foolproof probing, use them as follows: |
| * |
| * 1. clear and/or mask the device's internal interrupt. |
| * 2. sti(); |
| * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs |
| * 4. enable the device and cause it to trigger an interrupt. |
| * 5. wait for the device to interrupt, using non-intrusive polling or a delay. |
| * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple |
| * 7. service the device to clear its pending interrupt. |
| * 8. loop again if paranoia is required. |
| * |
| * probe_irq_on() returns a mask of allocated irq's. |
| * |
| * probe_irq_off() takes the mask as a parameter, |
| * and returns the irq number which occurred, |
| * or zero if none occurred, or a negative irq number |
| * if more than one irq occurred. |
| */ |
| |
| #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) |
| static inline unsigned long probe_irq_on(void) |
| { |
| return 0; |
| } |
| static inline int probe_irq_off(unsigned long val) |
| { |
| return 0; |
| } |
| static inline unsigned int probe_irq_mask(unsigned long val) |
| { |
| return 0; |
| } |
| #else |
| extern unsigned long probe_irq_on(void); /* returns 0 on failure */ |
| extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */ |
| extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */ |
| #endif |
| |
| #ifdef CONFIG_PROC_FS |
| /* Initialize /proc/irq/ */ |
| extern void init_irq_proc(void); |
| #else |
| static inline void init_irq_proc(void) |
| { |
| } |
| #endif |
| |
| struct seq_file; |
| int show_interrupts(struct seq_file *p, void *v); |
| int arch_show_interrupts(struct seq_file *p, int prec); |
| |
| extern int early_irq_init(void); |
| extern int arch_probe_nr_irqs(void); |
| extern int arch_early_irq_init(void); |
| extern void irq_set_pending(unsigned int irq); |
| #endif |