| /* |
| * An rtc driver for the Dallas DS1511 |
| * |
| * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
| * Copyright (C) 2007 Andrew Sharp <andy.sharp@onstor.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Real time clock driver for the Dallas 1511 chip, which also |
| * contains a watchdog timer. There is a tiny amount of code that |
| * platform code could use to mess with the watchdog device a little |
| * bit, but not a full watchdog driver. |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/rtc.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| |
| #define DRV_VERSION "0.6" |
| |
| enum ds1511reg { |
| DS1511_SEC = 0x0, |
| DS1511_MIN = 0x1, |
| DS1511_HOUR = 0x2, |
| DS1511_DOW = 0x3, |
| DS1511_DOM = 0x4, |
| DS1511_MONTH = 0x5, |
| DS1511_YEAR = 0x6, |
| DS1511_CENTURY = 0x7, |
| DS1511_AM1_SEC = 0x8, |
| DS1511_AM2_MIN = 0x9, |
| DS1511_AM3_HOUR = 0xa, |
| DS1511_AM4_DATE = 0xb, |
| DS1511_WD_MSEC = 0xc, |
| DS1511_WD_SEC = 0xd, |
| DS1511_CONTROL_A = 0xe, |
| DS1511_CONTROL_B = 0xf, |
| DS1511_RAMADDR_LSB = 0x10, |
| DS1511_RAMDATA = 0x13 |
| }; |
| |
| #define DS1511_BLF1 0x80 |
| #define DS1511_BLF2 0x40 |
| #define DS1511_PRS 0x20 |
| #define DS1511_PAB 0x10 |
| #define DS1511_TDF 0x08 |
| #define DS1511_KSF 0x04 |
| #define DS1511_WDF 0x02 |
| #define DS1511_IRQF 0x01 |
| #define DS1511_TE 0x80 |
| #define DS1511_CS 0x40 |
| #define DS1511_BME 0x20 |
| #define DS1511_TPE 0x10 |
| #define DS1511_TIE 0x08 |
| #define DS1511_KIE 0x04 |
| #define DS1511_WDE 0x02 |
| #define DS1511_WDS 0x01 |
| #define DS1511_RAM_MAX 0xff |
| |
| #define RTC_CMD DS1511_CONTROL_B |
| #define RTC_CMD1 DS1511_CONTROL_A |
| |
| #define RTC_ALARM_SEC DS1511_AM1_SEC |
| #define RTC_ALARM_MIN DS1511_AM2_MIN |
| #define RTC_ALARM_HOUR DS1511_AM3_HOUR |
| #define RTC_ALARM_DATE DS1511_AM4_DATE |
| |
| #define RTC_SEC DS1511_SEC |
| #define RTC_MIN DS1511_MIN |
| #define RTC_HOUR DS1511_HOUR |
| #define RTC_DOW DS1511_DOW |
| #define RTC_DOM DS1511_DOM |
| #define RTC_MON DS1511_MONTH |
| #define RTC_YEAR DS1511_YEAR |
| #define RTC_CENTURY DS1511_CENTURY |
| |
| #define RTC_TIE DS1511_TIE |
| #define RTC_TE DS1511_TE |
| |
| struct rtc_plat_data { |
| struct rtc_device *rtc; |
| void __iomem *ioaddr; /* virtual base address */ |
| unsigned long baseaddr; /* physical base address */ |
| int size; /* amount of memory mapped */ |
| int irq; |
| unsigned int irqen; |
| int alrm_sec; |
| int alrm_min; |
| int alrm_hour; |
| int alrm_mday; |
| }; |
| |
| static DEFINE_SPINLOCK(ds1511_lock); |
| |
| static __iomem char *ds1511_base; |
| static u32 reg_spacing = 1; |
| |
| static noinline void |
| rtc_write(uint8_t val, uint32_t reg) |
| { |
| writeb(val, ds1511_base + (reg * reg_spacing)); |
| } |
| |
| static inline void |
| rtc_write_alarm(uint8_t val, enum ds1511reg reg) |
| { |
| rtc_write((val | 0x80), reg); |
| } |
| |
| static noinline uint8_t |
| rtc_read(enum ds1511reg reg) |
| { |
| return readb(ds1511_base + (reg * reg_spacing)); |
| } |
| |
| static inline void |
| rtc_disable_update(void) |
| { |
| rtc_write((rtc_read(RTC_CMD) & ~RTC_TE), RTC_CMD); |
| } |
| |
| static void |
| rtc_enable_update(void) |
| { |
| rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD); |
| } |
| |
| /* |
| * #define DS1511_WDOG_RESET_SUPPORT |
| * |
| * Uncomment this if you want to use these routines in |
| * some platform code. |
| */ |
| #ifdef DS1511_WDOG_RESET_SUPPORT |
| /* |
| * just enough code to set the watchdog timer so that it |
| * will reboot the system |
| */ |
| void |
| ds1511_wdog_set(unsigned long deciseconds) |
| { |
| /* |
| * the wdog timer can take 99.99 seconds |
| */ |
| deciseconds %= 10000; |
| /* |
| * set the wdog values in the wdog registers |
| */ |
| rtc_write(BIN2BCD(deciseconds % 100), DS1511_WD_MSEC); |
| rtc_write(BIN2BCD(deciseconds / 100), DS1511_WD_SEC); |
| /* |
| * set wdog enable and wdog 'steering' bit to issue a reset |
| */ |
| rtc_write(DS1511_WDE | DS1511_WDS, RTC_CMD); |
| } |
| |
| void |
| ds1511_wdog_disable(void) |
| { |
| /* |
| * clear wdog enable and wdog 'steering' bits |
| */ |
| rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD); |
| /* |
| * clear the wdog counter |
| */ |
| rtc_write(0, DS1511_WD_MSEC); |
| rtc_write(0, DS1511_WD_SEC); |
| } |
| #endif |
| |
| /* |
| * set the rtc chip's idea of the time. |
| * stupidly, some callers call with year unmolested; |
| * and some call with year = year - 1900. thanks. |
| */ |
| int |
| ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm) |
| { |
| u8 mon, day, dow, hrs, min, sec, yrs, cen; |
| unsigned int flags; |
| |
| /* |
| * won't have to change this for a while |
| */ |
| if (rtc_tm->tm_year < 1900) { |
| rtc_tm->tm_year += 1900; |
| } |
| |
| if (rtc_tm->tm_year < 1970) { |
| return -EINVAL; |
| } |
| yrs = rtc_tm->tm_year % 100; |
| cen = rtc_tm->tm_year / 100; |
| mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ |
| day = rtc_tm->tm_mday; |
| dow = rtc_tm->tm_wday & 0x7; /* automatic BCD */ |
| hrs = rtc_tm->tm_hour; |
| min = rtc_tm->tm_min; |
| sec = rtc_tm->tm_sec; |
| |
| if ((mon > 12) || (day == 0)) { |
| return -EINVAL; |
| } |
| |
| if (day > rtc_month_days(rtc_tm->tm_mon, rtc_tm->tm_year)) { |
| return -EINVAL; |
| } |
| |
| if ((hrs >= 24) || (min >= 60) || (sec >= 60)) { |
| return -EINVAL; |
| } |
| |
| /* |
| * each register is a different number of valid bits |
| */ |
| sec = BIN2BCD(sec) & 0x7f; |
| min = BIN2BCD(min) & 0x7f; |
| hrs = BIN2BCD(hrs) & 0x3f; |
| day = BIN2BCD(day) & 0x3f; |
| mon = BIN2BCD(mon) & 0x1f; |
| yrs = BIN2BCD(yrs) & 0xff; |
| cen = BIN2BCD(cen) & 0xff; |
| |
| spin_lock_irqsave(&ds1511_lock, flags); |
| rtc_disable_update(); |
| rtc_write(cen, RTC_CENTURY); |
| rtc_write(yrs, RTC_YEAR); |
| rtc_write((rtc_read(RTC_MON) & 0xe0) | mon, RTC_MON); |
| rtc_write(day, RTC_DOM); |
| rtc_write(hrs, RTC_HOUR); |
| rtc_write(min, RTC_MIN); |
| rtc_write(sec, RTC_SEC); |
| rtc_write(dow, RTC_DOW); |
| rtc_enable_update(); |
| spin_unlock_irqrestore(&ds1511_lock, flags); |
| |
| return 0; |
| } |
| |
| int |
| ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm) |
| { |
| unsigned int century; |
| unsigned int flags; |
| |
| spin_lock_irqsave(&ds1511_lock, flags); |
| rtc_disable_update(); |
| |
| rtc_tm->tm_sec = rtc_read(RTC_SEC) & 0x7f; |
| rtc_tm->tm_min = rtc_read(RTC_MIN) & 0x7f; |
| rtc_tm->tm_hour = rtc_read(RTC_HOUR) & 0x3f; |
| rtc_tm->tm_mday = rtc_read(RTC_DOM) & 0x3f; |
| rtc_tm->tm_wday = rtc_read(RTC_DOW) & 0x7; |
| rtc_tm->tm_mon = rtc_read(RTC_MON) & 0x1f; |
| rtc_tm->tm_year = rtc_read(RTC_YEAR) & 0x7f; |
| century = rtc_read(RTC_CENTURY); |
| |
| rtc_enable_update(); |
| spin_unlock_irqrestore(&ds1511_lock, flags); |
| |
| rtc_tm->tm_sec = BCD2BIN(rtc_tm->tm_sec); |
| rtc_tm->tm_min = BCD2BIN(rtc_tm->tm_min); |
| rtc_tm->tm_hour = BCD2BIN(rtc_tm->tm_hour); |
| rtc_tm->tm_mday = BCD2BIN(rtc_tm->tm_mday); |
| rtc_tm->tm_wday = BCD2BIN(rtc_tm->tm_wday); |
| rtc_tm->tm_mon = BCD2BIN(rtc_tm->tm_mon); |
| rtc_tm->tm_year = BCD2BIN(rtc_tm->tm_year); |
| century = BCD2BIN(century) * 100; |
| |
| /* |
| * Account for differences between how the RTC uses the values |
| * and how they are defined in a struct rtc_time; |
| */ |
| century += rtc_tm->tm_year; |
| rtc_tm->tm_year = century - 1900; |
| |
| rtc_tm->tm_mon--; |
| |
| if (rtc_valid_tm(rtc_tm) < 0) { |
| dev_err(dev, "retrieved date/time is not valid.\n"); |
| rtc_time_to_tm(0, rtc_tm); |
| } |
| return 0; |
| } |
| |
| /* |
| * write the alarm register settings |
| * |
| * we only have the use to interrupt every second, otherwise |
| * known as the update interrupt, or the interrupt if the whole |
| * date/hours/mins/secs matches. the ds1511 has many more |
| * permutations, but the kernel doesn't. |
| */ |
| static void |
| ds1511_rtc_update_alarm(struct rtc_plat_data *pdata) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->rtc->irq_lock, flags); |
| rtc_write(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ? |
| 0x80 : BIN2BCD(pdata->alrm_mday) & 0x3f, |
| RTC_ALARM_DATE); |
| rtc_write(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ? |
| 0x80 : BIN2BCD(pdata->alrm_hour) & 0x3f, |
| RTC_ALARM_HOUR); |
| rtc_write(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ? |
| 0x80 : BIN2BCD(pdata->alrm_min) & 0x7f, |
| RTC_ALARM_MIN); |
| rtc_write(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ? |
| 0x80 : BIN2BCD(pdata->alrm_sec) & 0x7f, |
| RTC_ALARM_SEC); |
| rtc_write(rtc_read(RTC_CMD) | (pdata->irqen ? RTC_TIE : 0), RTC_CMD); |
| rtc_read(RTC_CMD1); /* clear interrupts */ |
| spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags); |
| } |
| |
| static int |
| ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| |
| if (pdata->irq < 0) { |
| return -EINVAL; |
| } |
| pdata->alrm_mday = alrm->time.tm_mday; |
| pdata->alrm_hour = alrm->time.tm_hour; |
| pdata->alrm_min = alrm->time.tm_min; |
| pdata->alrm_sec = alrm->time.tm_sec; |
| if (alrm->enabled) { |
| pdata->irqen |= RTC_AF; |
| } |
| ds1511_rtc_update_alarm(pdata); |
| return 0; |
| } |
| |
| static int |
| ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| |
| if (pdata->irq < 0) { |
| return -EINVAL; |
| } |
| alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday; |
| alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour; |
| alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min; |
| alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec; |
| alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0; |
| return 0; |
| } |
| |
| static irqreturn_t |
| ds1511_interrupt(int irq, void *dev_id) |
| { |
| struct platform_device *pdev = dev_id; |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| unsigned long events = RTC_IRQF; |
| |
| /* |
| * read and clear interrupt |
| */ |
| if (!(rtc_read(RTC_CMD1) & DS1511_IRQF)) { |
| return IRQ_NONE; |
| } |
| if (rtc_read(RTC_ALARM_SEC) & 0x80) { |
| events |= RTC_UF; |
| } else { |
| events |= RTC_AF; |
| } |
| rtc_update_irq(pdata->rtc, 1, events); |
| return IRQ_HANDLED; |
| } |
| |
| static void |
| ds1511_rtc_release(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| |
| if (pdata->irq >= 0) { |
| pdata->irqen = 0; |
| ds1511_rtc_update_alarm(pdata); |
| } |
| } |
| |
| static int |
| ds1511_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| |
| if (pdata->irq < 0) { |
| return -ENOIOCTLCMD; /* fall back into rtc-dev's emulation */ |
| } |
| switch (cmd) { |
| case RTC_AIE_OFF: |
| pdata->irqen &= ~RTC_AF; |
| ds1511_rtc_update_alarm(pdata); |
| break; |
| case RTC_AIE_ON: |
| pdata->irqen |= RTC_AF; |
| ds1511_rtc_update_alarm(pdata); |
| break; |
| case RTC_UIE_OFF: |
| pdata->irqen &= ~RTC_UF; |
| ds1511_rtc_update_alarm(pdata); |
| break; |
| case RTC_UIE_ON: |
| pdata->irqen |= RTC_UF; |
| ds1511_rtc_update_alarm(pdata); |
| break; |
| default: |
| return -ENOIOCTLCMD; |
| } |
| return 0; |
| } |
| |
| static const struct rtc_class_ops ds1511_rtc_ops = { |
| .read_time = ds1511_rtc_read_time, |
| .set_time = ds1511_rtc_set_time, |
| .read_alarm = ds1511_rtc_read_alarm, |
| .set_alarm = ds1511_rtc_set_alarm, |
| .release = ds1511_rtc_release, |
| .ioctl = ds1511_rtc_ioctl, |
| }; |
| |
| static ssize_t |
| ds1511_nvram_read(struct kobject *kobj, struct bin_attribute *ba, |
| char *buf, loff_t pos, size_t size) |
| { |
| ssize_t count; |
| |
| /* |
| * if count is more than one, turn on "burst" mode |
| * turn it off when you're done |
| */ |
| if (size > 1) { |
| rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); |
| } |
| if (pos > DS1511_RAM_MAX) { |
| pos = DS1511_RAM_MAX; |
| } |
| if (size + pos > DS1511_RAM_MAX + 1) { |
| size = DS1511_RAM_MAX - pos + 1; |
| } |
| rtc_write(pos, DS1511_RAMADDR_LSB); |
| for (count = 0; size > 0; count++, size--) { |
| *buf++ = rtc_read(DS1511_RAMDATA); |
| } |
| if (count > 1) { |
| rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); |
| } |
| return count; |
| } |
| |
| static ssize_t |
| ds1511_nvram_write(struct kobject *kobj, struct bin_attribute *bin_attr, |
| char *buf, loff_t pos, size_t size) |
| { |
| ssize_t count; |
| |
| /* |
| * if count is more than one, turn on "burst" mode |
| * turn it off when you're done |
| */ |
| if (size > 1) { |
| rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); |
| } |
| if (pos > DS1511_RAM_MAX) { |
| pos = DS1511_RAM_MAX; |
| } |
| if (size + pos > DS1511_RAM_MAX + 1) { |
| size = DS1511_RAM_MAX - pos + 1; |
| } |
| rtc_write(pos, DS1511_RAMADDR_LSB); |
| for (count = 0; size > 0; count++, size--) { |
| rtc_write(*buf++, DS1511_RAMDATA); |
| } |
| if (count > 1) { |
| rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); |
| } |
| return count; |
| } |
| |
| static struct bin_attribute ds1511_nvram_attr = { |
| .attr = { |
| .name = "nvram", |
| .mode = S_IRUGO | S_IWUGO, |
| .owner = THIS_MODULE, |
| }, |
| .size = DS1511_RAM_MAX, |
| .read = ds1511_nvram_read, |
| .write = ds1511_nvram_write, |
| }; |
| |
| static int __devinit |
| ds1511_rtc_probe(struct platform_device *pdev) |
| { |
| struct rtc_device *rtc; |
| struct resource *res; |
| struct rtc_plat_data *pdata = NULL; |
| int ret = 0; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| return -ENODEV; |
| } |
| pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| return -ENOMEM; |
| } |
| pdata->irq = -1; |
| pdata->size = res->end - res->start + 1; |
| if (!request_mem_region(res->start, pdata->size, pdev->name)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| pdata->baseaddr = res->start; |
| pdata->size = pdata->size; |
| ds1511_base = ioremap(pdata->baseaddr, pdata->size); |
| if (!ds1511_base) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| pdata->ioaddr = ds1511_base; |
| pdata->irq = platform_get_irq(pdev, 0); |
| |
| /* |
| * turn on the clock and the crystal, etc. |
| */ |
| rtc_write(0, RTC_CMD); |
| rtc_write(0, RTC_CMD1); |
| /* |
| * clear the wdog counter |
| */ |
| rtc_write(0, DS1511_WD_MSEC); |
| rtc_write(0, DS1511_WD_SEC); |
| /* |
| * start the clock |
| */ |
| rtc_enable_update(); |
| |
| /* |
| * check for a dying bat-tree |
| */ |
| if (rtc_read(RTC_CMD1) & DS1511_BLF1) { |
| dev_warn(&pdev->dev, "voltage-low detected.\n"); |
| } |
| |
| /* |
| * if the platform has an interrupt in mind for this device, |
| * then by all means, set it |
| */ |
| if (pdata->irq >= 0) { |
| rtc_read(RTC_CMD1); |
| if (request_irq(pdata->irq, ds1511_interrupt, |
| IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) { |
| |
| dev_warn(&pdev->dev, "interrupt not available.\n"); |
| pdata->irq = -1; |
| } |
| } |
| |
| rtc = rtc_device_register(pdev->name, &pdev->dev, &ds1511_rtc_ops, |
| THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| ret = PTR_ERR(rtc); |
| goto out; |
| } |
| pdata->rtc = rtc; |
| platform_set_drvdata(pdev, pdata); |
| ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); |
| if (ret) { |
| goto out; |
| } |
| return 0; |
| out: |
| if (pdata->rtc) { |
| rtc_device_unregister(pdata->rtc); |
| } |
| if (pdata->irq >= 0) { |
| free_irq(pdata->irq, pdev); |
| } |
| if (ds1511_base) { |
| iounmap(ds1511_base); |
| ds1511_base = NULL; |
| } |
| if (pdata->baseaddr) { |
| release_mem_region(pdata->baseaddr, pdata->size); |
| } |
| |
| kfree(pdata); |
| return ret; |
| } |
| |
| static int __devexit |
| ds1511_rtc_remove(struct platform_device *pdev) |
| { |
| struct rtc_plat_data *pdata = platform_get_drvdata(pdev); |
| |
| sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); |
| rtc_device_unregister(pdata->rtc); |
| pdata->rtc = NULL; |
| if (pdata->irq >= 0) { |
| /* |
| * disable the alarm interrupt |
| */ |
| rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD); |
| rtc_read(RTC_CMD1); |
| free_irq(pdata->irq, pdev); |
| } |
| iounmap(pdata->ioaddr); |
| ds1511_base = NULL; |
| release_mem_region(pdata->baseaddr, pdata->size); |
| kfree(pdata); |
| return 0; |
| } |
| |
| /* work with hotplug and coldplug */ |
| MODULE_ALIAS("platform:ds1511"); |
| |
| static struct platform_driver ds1511_rtc_driver = { |
| .probe = ds1511_rtc_probe, |
| .remove = __devexit_p(ds1511_rtc_remove), |
| .driver = { |
| .name = "ds1511", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init |
| ds1511_rtc_init(void) |
| { |
| return platform_driver_register(&ds1511_rtc_driver); |
| } |
| |
| static void __exit |
| ds1511_rtc_exit(void) |
| { |
| return platform_driver_unregister(&ds1511_rtc_driver); |
| } |
| |
| module_init(ds1511_rtc_init); |
| module_exit(ds1511_rtc_exit); |
| |
| MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>"); |
| MODULE_DESCRIPTION("Dallas DS1511 RTC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |