diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index ab82b7f..d6cb1a8 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -25,6 +25,7 @@
 
 #include <linux/genetlink.h>
 #include <linux/taskstats.h>
+#include <linux/cgroupstats.h>
 
 /*
  * Generic macros for dealing with netlink sockets. Might be duplicated
@@ -78,6 +79,7 @@
 	fprintf(stderr, "  -i: print IO accounting (works only with -p)\n");
 	fprintf(stderr, "  -l: listen forever\n");
 	fprintf(stderr, "  -v: debug on\n");
+	fprintf(stderr, "  -C: container path\n");
 }
 
 /*
@@ -212,6 +214,14 @@
 	       t->nvcsw, t->nivcsw);
 }
 
+void print_cgroupstats(struct cgroupstats *c)
+{
+	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
+		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
+		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+}
+
+
 void print_ioacct(struct taskstats *t)
 {
 	printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n",
@@ -239,11 +249,14 @@
 	int maskset = 0;
 	char *logfile = NULL;
 	int loop = 0;
+	int containerset = 0;
+	char containerpath[1024];
+	int cfd = 0;
 
 	struct msgtemplate msg;
 
 	while (1) {
-		c = getopt(argc, argv, "qdiw:r:m:t:p:vl");
+		c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:");
 		if (c < 0)
 			break;
 
@@ -260,6 +273,10 @@
 			printf("printing task/process context switch rates\n");
 			print_task_context_switch_counts = 1;
 			break;
+		case 'C':
+			containerset = 1;
+			strncpy(containerpath, optarg, strlen(optarg) + 1);
+			break;
 		case 'w':
 			logfile = strdup(optarg);
 			printf("write to file %s\n", logfile);
@@ -334,6 +351,11 @@
 		}
 	}
 
+	if (tid && containerset) {
+		fprintf(stderr, "Select either -t or -C, not both\n");
+		goto err;
+	}
+
 	if (tid) {
 		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
 			      cmd_type, &tid, sizeof(__u32));
@@ -344,6 +366,20 @@
 		}
 	}
 
+	if (containerset) {
+		cfd = open(containerpath, O_RDONLY);
+		if (cfd < 0) {
+			perror("error opening container file");
+			goto err;
+		}
+		rc = send_cmd(nl_sd, id, mypid, CGROUPSTATS_CMD_GET,
+			      CGROUPSTATS_CMD_ATTR_FD, &cfd, sizeof(__u32));
+		if (rc < 0) {
+			perror("error sending cgroupstats command");
+			goto err;
+		}
+	}
+
 	do {
 		int i;
 
@@ -422,6 +458,9 @@
 				}
 				break;
 
+			case CGROUPSTATS_TYPE_CGROUP_STATS:
+				print_cgroupstats(NLA_DATA(na));
+				break;
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
@@ -443,5 +482,7 @@
 	close(nl_sd);
 	if (fd)
 		close(fd);
+	if (cfd)
+		close(cfd);
 	return 0;
 }
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 6bb9be5..20c4c8b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -181,15 +181,6 @@
 
 ---------------------------
 
-What:	Interrupt only SA_* flags
-When:	September 2007
-Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
-	out of the signal namespace.
-
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
 When:	October 2008
 Why:	The stacking of class devices makes these values misleading and
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index a17b692..f4a8ebc 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -328,6 +328,37 @@
 		Unit: milliampere
 		RO
 
+*********
+* Power *
+*********
+
+power[1-*]_average		Average power use
+				Unit: microWatt
+				RO
+
+power[1-*]_average_highest	Historical average maximum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_average_lowest	Historical average minimum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input		Instantaneous power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input_highest	Historical maximum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input_lowest		Historical minimum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_reset_history	Reset input_highest, input_lowest,
+				average_highest and average_lowest.
+				WO
 
 **********
 * Alarms *
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index f266839..4200839 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -62,8 +62,8 @@
 #endif
 /* We can have up to 256 pages for devices. */
 #define DEVICE_PAGES 256
-/* This fits nicely in a single 4096-byte page. */
-#define VIRTQUEUE_NUM 127
+/* This will occupy 2 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 128
 
 /*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
  * this, and although I wouldn't recommend it, it works quite nicely here. */
@@ -1036,7 +1036,8 @@
 	void *p;
 
 	/* First we need some pages for this virtqueue. */
-	pages = (vring_size(num_descs) + getpagesize() - 1) / getpagesize();
+	pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
+		/ getpagesize();
 	p = get_pages(pages);
 
 	/* Initialize the configuration. */
@@ -1045,7 +1046,7 @@
 	vq->config.pfn = to_guest_phys(p) / getpagesize();
 
 	/* Initialize the vring. */
-	vring_init(&vq->vring, num_descs, p);
+	vring_init(&vq->vring, num_descs, p, getpagesize());
 
 	/* Add the configuration information to this device's descriptor. */
 	add_desc_field(dev, VIRTIO_CONFIG_F_VIRTQUEUE,
@@ -1342,7 +1343,7 @@
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
 		in->status = VIRTIO_BLK_S_UNSUPP;
-		wlen = sizeof(in);
+		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
 		/* Write */
 
@@ -1363,7 +1364,7 @@
 			/* Die, bad Guest, die. */
 			errx(1, "Write past end %llu+%u", off, ret);
 		}
-		wlen = sizeof(in);
+		wlen = sizeof(*in);
 		in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
 		/* Read */
@@ -1376,10 +1377,10 @@
 		ret = readv(vblk->fd, iov+1, in_num-1);
 		verbose("READ from sector %llu: %i\n", out->sector, ret);
 		if (ret >= 0) {
-			wlen = sizeof(in) + ret;
+			wlen = sizeof(*in) + ret;
 			in->status = VIRTIO_BLK_S_OK;
 		} else {
-			wlen = sizeof(in);
+			wlen = sizeof(*in);
 			in->status = VIRTIO_BLK_S_IOERR;
 		}
 	}
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 4269a11..1a45f11 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -68,6 +68,29 @@
   variable can be read when reading some _other_ cpu's variables.
 
 
+* Rules to follow when using local atomic operations
+
+- Variables touched by local ops must be per cpu variables.
+- _Only_ the CPU owner of these variables must write to them.
+- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
+  to update its local_t variables.
+- Preemption (or interrupts) must be disabled when using local ops in
+  process context to   make sure the process won't be migrated to a
+  different CPU between getting the per-cpu variable and doing the
+  actual local op.
+- When using local ops in interrupt context, no special care must be
+  taken on a mainline kernel, since they will run on the local CPU with
+  preemption already disabled. I suggest, however, to explicitly
+  disable preemption anyway to make sure it will still work correctly on
+  -rt kernels.
+- Reading the local cpu variable will provide the current copy of the
+  variable.
+- Reads of these variables can be done from any CPU, because updates to
+  "long", aligned, variables are always atomic. Since no memory
+  synchronization is done by the writer CPU, an outdated copy of the
+  variable can be read when reading some _other_ cpu's variables.
+
+
 * How to use local atomic operations
 
 #include <linux/percpu.h>
diff --git a/Documentation/markers.txt b/Documentation/markers.txt
index 295a71b..d9f50a1 100644
--- a/Documentation/markers.txt
+++ b/Documentation/markers.txt
@@ -35,12 +35,14 @@
 
 And,
 
-trace_mark(subsystem_event, "%d %s", someint, somestring);
+trace_mark(subsystem_event, "myint %d mystring %s", someint, somestring);
 Where :
 - subsystem_event is an identifier unique to your event
     - subsystem is the name of your subsystem.
     - event is the name of the event to mark.
-- "%d %s" is the formatted string for the serializer.
+- "myint %d mystring %s" is the formatted string for the serializer. "myint" and
+  "mystring" are repectively the field names associated with the first and
+  second parameter.
 - someint is an integer.
 - somestring is a char pointer.
 
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index f5a5e6d..563e442 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -4,8 +4,6 @@
 	- information on the 3Com EtherLink Plus (3c505) driver.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
-Configurable
-	- info on some of the configurable network parameters
 DLINK.txt
 	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
 PLIP.txt
@@ -26,8 +24,6 @@
 	- info on the driver for Baycom style amateur radio modems
 bridge.txt
 	- where to get user space programs for ethernet bridging with Linux.
-comx.txt
-	- info on drivers for COMX line of synchronous serial adapters.
 cops.txt
 	- info on the COPS LocalTalk Linux driver
 cs89x0.txt
@@ -78,20 +74,14 @@
 	- the Apple or Farallon LocalTalk PC card driver
 multicast.txt
 	- Behaviour of cards under Multicast
-ncsa-telnet
-	- notes on how NCSA telnet (DOS) breaks with MTU discovery enabled.
 netdevices.txt
 	- info on network device driver functions exported to the kernel.
 olympic.txt
 	- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
 policy-routing.txt
 	- IP policy-based routing
-pt.txt
-	- the Gracilis Packetwin AX.25 device driver
 ray_cs.txt
 	- Raylink Wireless LAN card driver info.
-routing.txt
-	- the new routing mechanism
 shaper.txt
 	- info on the module that can shape/limit transmitted traffic.
 sk98lin.txt
diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt
index b9d5b72..72f38b1 100644
--- a/Documentation/networking/3c505.txt
+++ b/Documentation/networking/3c505.txt
@@ -14,8 +14,7 @@
 ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
 will try to probe for it.
 
-The driver can be used as a loadable module.  See net-modules.txt for details
-of the parameters it can take.  
+The driver can be used as a loadable module.
 
 Theoretically, one instance of the driver can now run multiple cards,
 in the standard way (when loading a module, say "modprobe 3c505
diff --git a/Documentation/networking/Configurable b/Documentation/networking/Configurable
deleted file mode 100644
index 69c0dd4..0000000
--- a/Documentation/networking/Configurable
+++ /dev/null
@@ -1,34 +0,0 @@
-
-There are a few network parameters that can be tuned to better match
-the kernel to your system hardware and intended usage. The defaults
-are usually a good choice for 99% of the people 99% of the time, but
-you should be aware they do exist and can be changed.
-
-The current list of parameters can be found in the files:
-
-	linux/net/TUNABLE
-	Documentation/networking/ip-sysctl.txt
-
-Some of these are accessible via the sysctl interface, and many more are
-scheduled to be added in this way. For example, some parameters related 
-to Address Resolution Protocol (ARP) are very easily viewed and altered.
-
-	# cat /proc/sys/net/ipv4/arp_timeout
-	6000
-	# echo 7000 > /proc/sys/net/ipv4/arp_timeout
-	# cat /proc/sys/net/ipv4/arp_timeout
-	7000
-
-Others are already accessible via the related user space programs.
-For example, MAX_WINDOW has a default of 32 k which is a good choice for
-modern hardware, but if you have a slow (8 bit) Ethernet card and/or a slow
-machine, then this will be far too big for the card to keep up with fast 
-machines transmitting on the same net, resulting in overruns and receive errors.
-A value of about 4 k would be more appropriate, which can be set via:
-
-	# route add -net 192.168.3.0 window 4096
-
-The remainder of these can only be presently changed by altering a #define
-in the related header file. This means an edit and recompile cycle.
-
-						Paul Gortmaker 06/96
diff --git a/Documentation/networking/comx.txt b/Documentation/networking/comx.txt
deleted file mode 100644
index d1526eb..0000000
--- a/Documentation/networking/comx.txt
+++ /dev/null
@@ -1,248 +0,0 @@
-
-		COMX drivers for the 2.2 kernel
-
-Originally written by: Tivadar Szemethy, <tiv@itc.hu>
-Currently maintained by: Gergely Madarasz <gorgo@itc.hu>
-
-Last change: 21/06/1999.
-
-INTRODUCTION
-
-This document describes the software drivers and their use for the 
-COMX line of synchronous serial adapters for Linux version 2.2.0 and
-above.
-The cards are produced and sold by ITC-Pro Ltd. Budapest, Hungary
-For further info contact <info@itc.hu> 
-or http://www.itc.hu (mostly in Hungarian).
-The firmware files and software are available from ftp://ftp.itc.hu
-
-Currently, the drivers support the following cards and protocols:
-
-COMX (2x64 kbps intelligent board)
-CMX (1x256 + 1x128 kbps intelligent board)
-HiCOMX (2x2Mbps intelligent board)
-LoCOMX (1x512 kbps passive board)
-MixCOM (1x512 or 2x512kbps passive board with a hardware watchdog an
-	optional BRI interface and optional flashROM (1-32M))
-SliceCOM	(1x2Mbps channelized E1 board)
-PciCOM	(X21)
-
-At the moment of writing this document, the (Cisco)-HDLC, LAPB, SyncPPP and
-Frame Relay (DTE, rfc1294 IP encapsulation with partially implemented Q933a 
-LMI) protocols are available as link-level protocol. 
-X.25 support is being worked on.
-
-USAGE
-
-Load the comx.o module and the hardware-specific and protocol-specific 
-modules you'll need into the running kernel using the insmod utility.
-This creates the /proc/comx directory.
-See the example scripts in the 'etc' directory.
-
-/proc INTERFACE INTRO
-
-The COMX driver set has a new type of user interface based on the /proc 
-filesystem which eliminates the need for external user-land software doing 
-IOCTL calls. 
-Each network interface or device (i.e. those ones you configure with 'ifconfig'
-and 'route' etc.) has a corresponding directory under /proc/comx. You can
-dynamically create a new interface by saying 'mkdir /proc/comx/comx0' (or you
-can name it whatever you want up to 8 characters long, comx[n] is just a 
-convention).
-Generally the files contained in these directories are text files, which can
-be viewed by 'cat filename' and you can write a string to such a file by
-saying 'echo _string_ >filename'. This is very similar to the sysctl interface.
-Don't use a text editor to edit these files, always use 'echo' (or 'cat'
-where appropriate).
-When you've created the comx[n] directory, two files are created automagically
-in it: 'boardtype' and 'protocol'. You have to fill in these files correctly
-for your board and protocol you intend to use (see the board and protocol 
-descriptions in this file below or the example scripts in the 'etc' directory).
-After filling in these files, other files will appear in the directory for 
-setting the various hardware- and protocol-related informations (for example
-irq and io addresses, keepalive values etc.) These files are set to default 
-values upon creation, so you don't necessarily have to change all of them.
-
-When you're ready with filling in the files in the comx[n] directory, you can
-configure the corresponding network interface with the standard network 
-configuration utilities. If you're unable to bring the interfaces up, look up
-the various kernel log files on your system, and consult the messages for
-a probable reason.
-
-EXAMPLE
-
-To create the interface 'comx0' which is the first channel of a COMX card:
-
-insmod comx 
-# insmod comx-hw-comx ; insmod comx-proto-ppp  (these are usually
-autoloaded if you use the kernel module loader)
-
-mkdir /proc/comx/comx0
-echo comx >/proc/comx/comx0/boardtype
-echo 0x360 >/proc/comx/comx0/io		<- jumper-selectable I/O port 
-echo 0x0a >/proc/comx/comx0/irq		<- jumper-selectable IRQ line
-echo 0xd000 >/proc/comx/comx0/memaddr	<- software-configurable memory
-					   address. COMX uses 64 KB, and this
-					   can be: 0xa000, 0xb000, 0xc000, 
-					   0xd000, 0xe000. Avoid conflicts
-					   with other hardware.
-cat </etc/siol1.rom >/proc/comx/comx0/firmware <- the firmware for the card
-echo HDLC >/proc/comx/comx0/protocol	<- the data-link protocol
-echo 10 >/proc/comx/comx0/keepalive	<- the keepalive for the protocol
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 <-
-					   finally configure it with ifconfig
-Check its status:
-cat /proc/comx/comx0/status
-
-If you want to use the second channel of this board:
-
-mkdir /proc/comx/comx1
-echo comx >/proc/comx/comx1/boardtype
-echo 0x360 >/proc/comx/comx1/io	
-echo 10 >/proc/comx/comx1/irq		
-echo 0xd000 >/proc/comx/comx1/memaddr
-echo 1 >/proc/comx/comx1/channel	<- channels are numbered 
-					   as 0 (default) and 1
-
-Now, check if the driver recognized that you're going to use the other
-channel of the same adapter:
-
-cat /proc/comx/comx0/twin
-comx1
-cat /proc/comx/comx1/twin
-comx0
-
-You don't have to load the firmware twice, if you use both channels of
-an adapter, just write it into the channel 0's /proc firmware file.
-
-Default values: io 0x360 for COMX, 0x320 (HICOMX), irq 10, memaddr 0xd0000
-
-THE LOCOMX HARDWARE DRIVER
-
-The LoCOMX driver doesn't require firmware, and it doesn't use memory either,
-but it uses DMA channels 1 and 3. You can set the clock rate (if enabled by
-jumpers on the board) by writing the kbps value into the file named 'clock'.
-Set it to 'external' (it is the default) if you have external clock source.
-
-(Note: currently the LoCOMX driver does not support the internal clock)
-
-THE COMX, CMX AND HICOMX DRIVERS
-
-On the HICOMX, COMX and CMX, you have to load the firmware (it is different for
-the three cards!). All these adapters can share the same memory
-address (we usually use 0xd0000). On the CMX you can set the internal
-clock rate (if enabled by jumpers on the small adapter boards) by writing
-the kbps value into the 'clock' file. You have to do this before initializing
-the card. If you use both HICOMX and CMX/COMX cards, initialize the HICOMX
-first. The I/O address of the HICOMX board is not configurable by any
-method available to the user: it is hardwired to 0x320, and if you have to 
-change it, consult ITC-Pro Ltd.
-
-THE MIXCOM DRIVER
-
-The MixCOM board doesn't require firmware, the driver communicates with
-it through I/O ports. You can have three of these cards in one machine.
-
-THE SLICECOM DRIVER
-
-The SliceCOM board doesn't require firmware. You can have 4 of these cards
-in one machine. The driver doesn't (yet) support shared interrupts, so
-you will need a separate IRQ line for every board.
-Read Documentation/networking/slicecom.txt for help on configuring
-this adapter.
-
-THE HDLC/PPP LINE PROTOCOL DRIVER
-
-The HDLC/SyncPPP line protocol driver uses the kernel's built-in syncppp
-driver (syncppp.o). You don't have to manually select syncppp.o when building
-the kernel, the dependencies compile it in automatically.
-
-
-
-
-EXAMPLE
-(setting up hw parameters, see above)
-
-# using HDLC:
-echo hdlc >/proc/comx/comx0/protocol
-echo 10 >/proc/comx/comx0/keepalive	<- not necessary, 10 is the default
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-(setting up hw parameters, see above)
-
-# using PPP:
-echo ppp >/proc/comx/comx0/protocol
-ifconfig comx0 up
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-
-THE LAPB LINE PROTOCOL DRIVER
-
-For this, you'll need to configure LAPB support (See 'LAPB Data Link Driver' in
-'Network options' section) into your kernel (thanks to Jonathan Naylor for his 
-excellent implementation). 
-comx-proto-lapb.o provides the following files in the appropriate directory
-(the default values in parens): t1 (5), t2 (1), n2 (20), mode (DTE, STD) and
-window (7). Agree with the administrator of your peer router on these
-settings (most people use defaults, but you have to know if you are DTE or
-DCE).
-
-EXAMPLE
-
-(setting up hw parameters, see above)
-echo lapb >/proc/comx/comx0/protocol
-echo dce >/proc/comx/comx0/mode		<- DCE interface in this example
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-
-THE FRAME RELAY PROTOCOL DRIVER
-
-You DON'T need any other frame relay related modules from the kernel to use
-COMX-Frame Relay. This protocol is a bit more complicated than the others, 
-because it allows to use 'subinterfaces' or DLCIs within one physical device.
-First you have to create the 'master' device (the actual physical interface)
-as you would do for other protocols. Specify 'frad' as protocol type.
-Now you can bring this interface up by saying 'ifconfig comx0 up' (or whatever
-you've named the interface). Do not assign any IP address to this interface
-and do not set any routes through it.
-Then, set up your DLCIs the following way: create a comx interface for each
-DLCI you intend to use (with mkdir), and write 'dlci' to the 'boardtype' file, 
-and 'ietf-ip' to the 'protocol' file. Currently, the only supported 
-encapsulation type is this (also called as RFC1294/1490 IP encapsulation).
-Write the DLCI number to the 'dlci' file, and write the name of the physical
-COMX device to the file called 'master'. 
-Now you can assign an IP address to this interface and set routes using it.
-See the example file for further info and example config script.
-Notes: this driver implements a DTE interface with partially implemented
-Q933a LMI.
-You can find an extensively commented example in the 'etc' directory.
-
-FURTHER /proc FILES
-
-boardtype:
-Type of the hardware. Valid values are:
- 'comx', 'hicomx', 'locomx', 'cmx', 'slicecom'.
-
-protocol:
-Data-link protocol on this channel. Can be: HDLC, LAPB, PPP, FRAD
-
-status:
-You can read the channel's actual status from the 'status' file, for example
-'cat /proc/comx/comx3/status'.
-
-lineup_delay:
-Interpreted in seconds (default is 1). Used to avoid line jitter: the system
-will consider the line status 'UP' only if it is up for at least this number
-of seconds.
-
-debug: 
-You can set various debug options through this file. Valid options are:
-'comx_events', 'comx_tx', 'comx_rx', 'hw_events', 'hw_tx', 'hw_rx'.
-You can enable a debug options by writing its name prepended by a '+' into
-the debug file, for example 'echo +comx_rx >comx0/debug'. 
-Disabling an option happens similarly, use the '-' prefix 
-(e.g. 'echo -hw_rx >debug').
-Debug results can be read from the debug file, for example: 
-tail -f /proc/comx/comx2/debug
-
-
diff --git a/Documentation/networking/ncsa-telnet b/Documentation/networking/ncsa-telnet
deleted file mode 100644
index d77d28b..0000000
--- a/Documentation/networking/ncsa-telnet
+++ /dev/null
@@ -1,16 +0,0 @@
-NCSA telnet doesn't work with path MTU discovery enabled. This is due to a
-bug in NCSA that also stops it working with other modern networking code
-such as Solaris.
-
-The following information is courtesy of 
-Marek <marekm@i17linuxb.ists.pwr.wroc.pl>
-
-There is a fixed version somewhere on ftp.upe.ac.za (sorry, I don't
-remember the exact pathname, and this site is very slow from here).
-It may or may not be faster for you to get it from
-ftp://ftp.ists.pwr.wroc.pl/pub/msdos/telnet/ncsa_upe/tel23074.zip
-(source is in v230704s.zip).  I have tested it with 1.3.79 (with
-path mtu discovery enabled - ncsa 2.3.08 didn't work) and it seems
-to work.  I don't know if anyone is working on this code - this
-version is over a year old.  Too bad - it's faster and often more
-stable than these windoze telnets, and runs on almost anything...
diff --git a/Documentation/networking/pt.txt b/Documentation/networking/pt.txt
deleted file mode 100644
index 72e888c..0000000
--- a/Documentation/networking/pt.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-This is the README for the Gracilis Packetwin device driver, version 0.5
-ALPHA for Linux 1.3.43.
-
-These files will allow you to talk to the PackeTwin (now know as PT) and
-connect through it just like a pair of TNCs.  To do this you will also
-require the AX.25 code in the kernel enabled.
-
-There are four files in this archive; this readme, a patch file, a .c file
-and finally a .h file.  The two program files need to be put into the
-drivers/net directory in the Linux source tree, for me this is the
-directory /usr/src/linux/drivers/net.  The patch file needs to be patched in
-at the top of the Linux source tree (/usr/src/linux in my case).
-
-You will most probably have to edit the pt.c file to suit your own setup,
-this should just involve changing some of the defines at the top of the file. 
-Please note that if you run an external modem you must specify a speed of 0.
-
-The program is currently setup to run a 4800 baud external modem on port A
-and a Kantronics DE-9600 daughter board on port B so if you have this (or
-something similar) then you're right.
-
-To compile in the driver, put the files in the correct place and patch in
-the diff.  You will have to re-configure the kernel again before you
-recompile it. 
-
-The driver is not real good at the moment for finding the card.  You can
-'help' it by changing the order of the potential addresses in the structure
-found in the pt_init() function so the address of where the card is is put
-first.
-
-After compiling, you have to get them going, they are pretty well like any
-other net device and just need ifconfig to get them going.
-As an example, here is my /etc/rc.net
---------------------------
-
-#
-# Configure the PackeTwin, port A.
-/sbin/ifconfig pt0a 44.136.8.87 hw ax25 vk2xlz mtu 512 
-/sbin/ifconfig pt0a 44.136.8.87 broadcast 44.136.8.255 netmask 255.255.255.0
-/sbin/route add -net 44.136.8.0 netmask 255.255.255.0 dev pt0a
-/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.136.8.68 dev pt0a
-/sbin/route add -net 138.25.16.0 netmask 255.255.240.0 dev pt0a
-/sbin/route add -host 44.136.8.255 dev pt0a
-#
-# Configure the PackeTwin, port B.
-/sbin/ifconfig pt0b 44.136.8.87 hw ax25 vk2xlz-1 mtu 512
-/sbin/ifconfig pt0b 44.136.8.87 broadcast 44.255.255.255 netmask 255.0.0.0
-/sbin/route add -host 44.136.8.216 dev pt0b
-/sbin/route add -host 44.136.8.95  dev pt0b
-/sbin/route add -host 44.255.255.255 dev pt0b
-
-This version of the driver comes under the GNU GPL.  If you have one of my
-previous (non-GPL) versions of the driver, please update to this one.
-
-I hope that this all works well for you.  I would be pleased to hear how
-many people use the driver and if it does its job.
-
-  - Craig vk2xlz <csmall@small.dropbear.id.au>
diff --git a/Documentation/networking/routing.txt b/Documentation/networking/routing.txt
deleted file mode 100644
index a26838b..0000000
--- a/Documentation/networking/routing.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-The directory ftp.inr.ac.ru:/ip-routing contains:
-
-- iproute.c - "professional" routing table maintenance utility.
-
-- rdisc.tar.gz - rdisc daemon, ported from Sun.
-	STRONGLY RECOMMENDED FOR ALL HOSTS.
-
-- routing.tgz - original Mike McLagan's route by source patch.
-		Currently it is obsolete.
-
-- gated.dif-ss<NEWEST>.gz - gated-R3_6Alpha_2 fixes.
-	        Look at README.gated
-
-- mrouted-3.8.dif.gz - mrouted-3.8 fixes.
-
-- rtmon.c - trivial debugging utility: reads and stores netlink.
-
-
-NEWS for user.
-
-- Policy based routing. Routing decisions are made on the basis
-  not only of destination address, but also source address,
-  TOS and incoming interface.
-- Complete set of IP level control messages.
-  Now Linux is the only OS in the world complying to RFC requirements.
-  Great win 8)
-- New interface addressing paradigm.
-  Assignment of address ranges to interface,
-  multiple prefixes etc. etc.
-  Do not bother, it is compatible with the old one. Moreover:
-- You don't need to do "route add aaa.bbb.ccc... eth0" anymore,
-  it is done automatically.
-- "Abstract" UNIX sockets and security enhancements.
-  This is necessary to use TIRPC and TLI emulation library.
-
-NEWS for hacker.
-
-- New destination cache. Flexible, robust and just beautiful.
-- Network stack is reordered, simplified, optimized, a lot of bugs fixed.
-  (well, and new bugs were introduced, but I haven't seen them yet 8))
-  It is difficult to describe all the changes, look into source.
-
-If you see this file, then this patch works 8)
-
-Alexey Kuznetsov.
-kuznet@ms2.inr.ac.ru
diff --git a/Documentation/networking/slicecom.hun b/Documentation/networking/slicecom.hun
deleted file mode 100644
index bed2f04..0000000
--- a/Documentation/networking/slicecom.hun
+++ /dev/null
@@ -1,371 +0,0 @@
-
-SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz
-
-Bartók István <bartoki@itc.hu>
-Utolso modositas: Wed Aug 29 17:26:58 CEST 2001
-
------------------------------------------------------------------
-
-Hasznalata:
-
-Forditas:
-
-Code maturity level options
-	[*] Prompt for development and/or incomplete code/drivers
-
-Network device support
-	Wan interfaces
-		<M> MultiGate (COMX) synchronous
-			<M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW)
-			<M> Support for HDLC and syncPPP...
-
-
-A modulok betoltese:
-
-modprobe comx
-
-modprobe comx-proto-ppp		# a Cisco-HDLC es a SyncPPP protokollt is
-				# ez a modul adja
-
-modprobe comx-hw-munich		# a modul betoltodeskor azonnal jelent a
-				# syslogba a detektalt kartyakrol
-
-
-Konfiguralas:
-
-# Ezen az interfeszen Cisco-HDLC vonali protokoll fog futni
-# Az interfeszhez rendelt idoszeletek: 1,2 (128 kbit/sec-es vonal)
-# (a G.703 keretben az elso adatot vivo idoszelet az 1-es)
-#
-mkdir /proc/comx/comx0.1/
-echo slicecom	>/proc/comx/comx0.1/boardtype
-echo hdlc	>/proc/comx/comx0.1/protocol
-echo 1 2	>/proc/comx/comx0.1/timeslots
-
-
-# Ezen az interfeszen SyncPPP vonali protokoll fog futni
-# Az interfeszhez rendelt idoszelet: 3 (64 kbit/sec-es vonal)
-#
-mkdir /proc/comx/comx0.2/
-echo slicecom	>/proc/comx/comx0.2/boardtype
-echo ppp	>/proc/comx/comx0.2/protocol
-echo 3		>/proc/comx/comx0.2/timeslots
-
-...
-
-ifconfig comx0.1 up
-ifconfig comx0.2 up
-
------------------------------------------------------------------
-
-A COMX driverek default 20 csomagnyi transmit queue-t rendelnek a halozati
-interfeszekhez. WAN halozatokban ennel hosszabbat is szokas hasznalni
-(20 es 100 kozott), hogy a vonal kihasznaltsaga nagy terheles eseten jobb
-legyen (bar ezzel megno a varhato kesleltetes a csomagok sorban allasa miatt):
-
-# ifconfig comx0 txqueuelen 50
-
-Ezt a beallitasi lehetoseget csak az ujabb disztribuciok ifconfig parancsa
-tamogatja (amik mar a 2.2 kernelekhez keszultek, mint a RedHat 6.1 vagy a
-Debian 2.2).
-
-A 2.1-es Debian disztribuciohoz a http://www.debian.org/~rcw/2.2/netbase/
-cimrol toltheto le ujabb netbase csomag, ami mar ilyet tamogato ifconfig
-parancsot tartalmaz. Bovebben a 2.2 kernel hasznalatarol Debian 2.1 alatt:
-http://www.debian.org/releases/stable/running-kernel-2.2
-
------------------------------------------------------------------
-
-A kartya LED-jeinek jelentese:
-
-piros	- eg, ha Remote Alarm-ot kuld a tuloldal
-zold	- eg, ha a vett jelben megtalalja a keretszinkront
-
-Reszletesebben:
-
-piros:	zold:	jelentes:
-
--	-	nincs keretszinkron (nincs jel, vagy rossz a jel)
--	eg	"minden rendben"
-eg	eg	a vetel OK, de a tuloldal Remote Alarm-ot kuld
-eg	-	ez nincs ertelmezve, egyelore funkcio nelkul
-
------------------------------------------------------------------
-
-Reszletesebb leiras a hardver beallitasi lehetosegeirol:
-
-Az altalanos,- es a protokoll-retegek beallitasi lehetosegeirol a 'comx.txt'
-fajlban leirtak SliceCOM kartyanal is ervenyesek, itt csak a hardver-specifikus
-beallitasi lehetosegek vannak osszefoglalva:
-
-Konfiguralasi interfesz a /proc/comx/ alatt:
-
-Minden timeslot-csoportnak kulon comx* interfeszt kell letrehozni mkdir-rel:
-comx0, comx1, .. stb. Itt beallithato, hogy az adott interfesz hanyadik kartya
-melyik timeslotja(i)bol alljon ossze. A Cisco-fele serial3:1 elnevezesek
-(serial3:1 = a 3. kartyaban az 1-es idoszelet-csoport) Linuxon aliasing-ot
-jelentenenek, ezert mi nem tudunk ilyen elnevezest hasznalni.
-
-Tobb kartya eseten a comx0.1, comx0.2, ... vagy slice0.1, slice0.2 nevek
-hasznalhatoak.
-
-Tobb SliceCOM kartya is lehet egy gepben, de sajat interrupt kell mindegyiknek,
-nem tud meg megosztott interruptot kezelni.
-
-Az egesz kartyat erinto beallitasok:
-
-Az ioport es irq beallitas nincs: amit a PCI BIOS kioszt a rendszernek,
-azt hasznalja a driver.
-
-
-comx0/boardnum	- hanyadik SliceCOM kartya a gepben (a 'termeszetes' PCI
-		sorrendben ertve: ahogyan a /proc/pci-ban vagy az 'lspci'
-		kimeneteben megjelenik, altalaban az alaplapi PCI meghajto
-		aramkorokhoz kozelebb eso kartyak a kisebb sorszamuak)
-
-		Default: 0 (0-tol kezdodik a szamolas)
-
-
-Bar a kovetkezoket csak egy-egy interfeszen allitjuk at, megis az egesz kartya
-mukodeset egyszerre allitjak. A megkotes hogy csak UP-ban levo interfeszen
-hasznalhatoak, azert van, mert kulonben nem vart eredmenyekre vezetne egy ilyen
-paranccsorozat:
-
-	echo 0        >boardnum
-	echo internal >clock_source
-	echo 1        >boardnum
-
-- Ez a 0-s board clock_source-at allitana at.
-
-Ezek a beallitasok megmaradnak az osszes interfesz torlesekor, de torlodnek
-a driver modul ki/betoltesekor.
-
-
-comx0/clock_source - A Tx orajelforrasa, a Cisco-val hasonlatosra keszult.
-	Hasznalata:
-
-	papaya:# echo line     >/proc/comx/comx0/clock_source
-	papaya:# echo internal >/proc/comx/comx0/clock_source
-
-	line     - A Tx orajelet a vett adatfolyambol dekodolja, igyekszik
-		igazodni hozza. Ha nem lat orajelet az inputon, akkor
-		atall a sajat orajelgeneratorara.
-	internal - A Tx orajelet a sajat orajelgeneratora szolgaltatja.
-
-	Default: line
-
-	Normal osszeallitas eseten a tavkozlesi szolgaltato eszkoze
-	(pl. HDSL modem) adja az orajelet, ezert ez a default.
-
-
-comx0/framing	- A CRC4 ki/be kapcsolasa
-
-	A CRC4: 16 PCM keretet (A PCM keret az, amibe a 32 darab 64
-	kilobites csatorna van bemultiplexalva. Nem osszetevesztendo a HDLC
-	kerettel.) 2x8 -as csoportokra osztanak, es azokhoz 4-4 bites CRC-t
-	szamolnak. Elsosorban a vonal minosegenek a monitorozasara szolgal.
-
-	papaya:~# echo crc4	>/proc/comx/comx0/framing
-	papaya:~# echo no-crc4	>/proc/comx/comx0/framing
-
-	Default a 'crc4', a MATAV vonalak altalaban igy futnak. De ha nem
-	egyforma is a beallitas a vonal ket vegen, attol a forgalom altalaban
-	at tud menni.
-
-
-comx0/linecode	- A vonali kodolas beallitasa
-
-	papaya:~# echo hdb3	>/proc/comx/comx0/linecode
-	papaya:~# echo ami	>/proc/comx/comx0/linecode
-
-	Default a 'hdb3', a MATAV vonalak igy futnak.
-	
-	(az AMI kodolas igen ritka E1-es vonalaknal). Ha ez a beallitas nem
-	egyezik a vonal ket vegen, akkor elofordulhat hogy a keretszinkron
-	osszejon, de CRC4-hibak es a vonalakon atvitt adatokban is hibak
-	keletkeznek (amit a HDLC/SyncPPP szinten CRC-hibaval jelez)
-
-
-comx0/reg	- a kartya aramkoreinek, a MUNICH (reg) es a FALC (lbireg)
-comx0/lbireg	regisztereinek kozvetlen elerese. Hasznalata:
-
-		echo >reg 0x04 0x0	- a 4-es regiszterbe 0-t ir
-		echo >reg 0x104		- printk()-val kiirja a 4-es regiszter
-					tartalmat a syslogba.
-
-		WARNING: ezek csak a fejleszteshez keszultek, sok galibat
-		lehet veluk okozni!
-
-
-comx0/loopback - A kartya G.703 jelenek a visszahurkolasara is van lehetoseg:
-
-	papaya:# echo none   >/proc/comx/comx0/loopback
-	papaya:# echo local  >/proc/comx/comx0/loopback
-	papaya:# echo remote >/proc/comx/comx0/loopback
-
-	none   - nincs visszahurkolas, normal mukodes
-	local  - a kartya a sajat maga altal adott jelet kapja vissza
-	remote - a kartya a kivulrol vett jelet adja kifele
-
-	Default: none
-
------------------------------------------------------------------
-
-Az interfeszhez (Cisco terminologiaban 'channel-group') kapcsolodo beallitasok:
-
-comx0/timeslots	- mely timeslotok (idoszeletek) tartoznak az adott interfeszhez.
-
-	papaya:~# cat /proc/comx/comx0/timeslots
-	1 3 4 5 6
-	papaya:~#
-
-	Egy timeslot megkeresese (hanyas interfeszbe tartozik nalunk):
-
-	papaya:~# grep ' 4' /proc/comx/comx*/timeslots
-	/proc/comx/comx0/timeslots:1 3 4 5 6
-	papaya:~#
-
-	Beallitasa:
-	papaya:~# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots
-	
-	A timeslotok sorrendje nem szamit, '1 3 2' ugyanaz mint az '1 2 3'.
-
-	Beallitashoz az adott interfesznek DOWN-ban kell lennie
-	(ifconfig comx0 down), de ugyanannak a kartyanak a tobbi interfesze
-	uzemelhet kozben.
-
-	Beallitaskor leellenorzi, hogy az uj timeslotok nem utkoznek-e egy
-	masik interfesz timeslotjaival. Ha utkoznek, akkor nem allitja at.
-
-	Mindig 10-es szamrendszerben tortenik a timeslotok ertelmezese, nehogy
-	a 08, 09 alaku felirast rosszul ertelmezze.
-
------------------------------------------------------------------
-
-Az interfeszek es a kartya allapotanak lekerdezese:
-
-- A ' '-szel kezdodo sorok az eredeti kimenetet, a //-rel kezdodo sorok a
-magyarazatot jelzik.
-
- papaya:~$ cat /proc/comx/comx1/status
- Interface administrative status is UP, modem status is UP, protocol is UP
- Modem status changes: 0, Transmitter status is IDLE, tbusy: 0
- Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m)
-               (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m)
- Debug flags: none
- RX errors: len: 22, overrun: 1, crc: 0, aborts: 0
-            buffer overrun: 0, pbuffer overrun: 0
- TX errors: underrun: 0
- Line keepalive (value: 10) status UP [0]
-
-// Itt kezdodik a hardver-specifikus resz:
- Controller status:
-         No alarms
-
-// Alarm: hibajelzes:
-//
-// No alarms - minden rendben
-//
-// LOS  - Loss Of Signal - nem erzekel jelet a bemeneten.
-// AIS  - Alarm Indication Signal - csak egymas utani 1-esek jonnek
-//	a bemeneten, a tuloldal igy is jelezheti hogy meghibasodott vagy
-//	nincs inicializalva.
-// AUXP - Auxiliary Pattern Indication - 01010101.. sorozat jon a bemeneten.
-// LFA  - Loss of Frame Alignment - nincs keretszinkron
-// RRA  - Receive Remote Alarm - a tuloldal el, de hibat jelez.
-// LMFA - Loss of CRC4 Multiframe Alignment - nincs CRC4-multikeret-szinkron
-// NMF  - No Multiframe alignment Found after 400 msec - ilyen alarm a no-crc4
-//	es crc4 keretezesek eseten nincs, lasd lentebb
-//
-// Egyeb lehetseges hibajelzesek:
-//
-// Transmit Line Short - a kartya ugy erzi hogy az adasi kimenete rovidre
-//	van zarva, ezert kikapcsolta az adast. (nem feltetlenul veszi eszre
-//	a kulso rovidzarat)
-
-// A veteli oldal csomagjainak lancolt listai, debug celokra:
-
- Rx ring:
-         rafutott: 0
-         lastcheck: 50845731, jiffies: 51314281
-         base: 017b1858
-         rx_desc_ptr: 0
-         rx_desc_ptr: 017b1858
-         hw_curr_ptr: 017b1858
-         06040000 017b1868 017b1898 c016ff00
-         06040000 017b1878 017b1e9c c016ff00
-         46040000 017b1888 017b24a0 c016ff00
-         06040000 017b1858 017b2aa4 c016ff00
-
-// A kartyat hasznalo tobbi interfesz: a 0-s channel-group a comx1 interfesz,
-// es az 1,2,...,16 timeslotok tartoznak hozza:
-
- Interfaces using this board: (channel-group, interface, timeslots)
-          0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-          1 comx2: 17
-          2 comx3: 18
-          3 comx4: 19
-          4 comx5: 20
-          5 comx6: 21
-          6 comx7: 22
-          7 comx8: 23
-          8 comx9: 24
-          9 comx10: 25
-         10 comx11: 26
-         11 comx12: 27
-         12 comx13: 28
-         13 comx14: 29
-         14 comx15: 30
-         15 comx16: 31
-
-// Hany esemenyt kezelt le a driver egy-egy hardver-interrupt kiszolgalasanal:
-
- Interrupt work histogram:
- hist[ 0]:        0 hist[ 1]:        2 hist[ 2]:    18574 hist[ 3]:       79
- hist[ 4]:       14 hist[ 5]:        1 hist[ 6]:        0 hist[ 7]:        1
- hist[ 8]:        0 hist[ 9]:        7
-
-// Hany kikuldendo csomag volt mar a Tx-ringben amikor ujabb lett irva bele:
-
- Tx ring histogram:
- hist[ 0]:     2329 hist[ 1]:        0 hist[ 2]:        0 hist[ 3]:        0
-
-// Az E1-interfesz hiba-szamlaloi, az rfc2495-nek megfeleloen:
-// (kb. a Cisco routerek "show controllers e1" formatumaban: http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126)
-
-Data in current interval (91 seconds elapsed):
-   9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors
-   0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs
-Data in Interval 1 (15 minutes):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 4 intervals (1 hour):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 96 intervals (24 hours):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-
------------------------------------------------------------------
-
-Nehany kulonlegesebb beallitasi lehetoseg (idovel beepulhetnek majd a driverbe):
-Ezekkel sok galibat lehet okozni, nagyon ovatosan kell oket hasznalni!
-
-	modified CRC-4, for improved interworking of CRC-4 and non-CRC-4
-	devices: (lasd page 107 es g706 Annex B)
-		lbireg[ 0x1b ] |= 0x08
-		lbireg[ 0x1c ] |= 0xc0
-	- ilyenkor ertelmezett az NMF - 'No Multiframe alignment Found after
-	400 msec' alarm.
-
-	FALC - a vonali meghajto IC
-	local loop - a sajat adasomat halljam vissza
-	remote loop - a kivulrol jovo adast adom vissza
-
-	Egy hibakeresesre hasznalhato dolog:
-		- 1-es timeslot local loop a FALC-ban:	echo >lbireg 0x1d 0x21
-		- local loop kikapcsolasa:		echo >lbireg 0x1d 0x00
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
deleted file mode 100644
index c82c0cf..0000000
--- a/Documentation/networking/slicecom.txt
+++ /dev/null
@@ -1,369 +0,0 @@
-
-SliceCOM adapter user's documentation - for the 0.51 driver version
-
-Written by Bartók István <bartoki@itc.hu>
-
-English translation: Lakatos György <gyuri@itc.hu>
-Mon Dec 11 15:28:42 CET 2000
-
-Last modified: Wed Aug 29 17:25:37 CEST 2001
-
------------------------------------------------------------------
-
-Usage:
-
-Compiling the kernel:
-
-Code maturity level options
-	[*] Prompt for development and/or incomplete code/drivers
-
-Network device support
-	Wan interfaces
-		<M> MultiGate (COMX) synchronous
-			<M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW)
-			<M> Support for HDLC and syncPPP...
-
-
-Loading the modules:
-
-modprobe comx
-
-modprobe comx-proto-ppp		# module for  Cisco-HDLC and SyncPPP protocols
-
-modprobe comx-hw-munich		# the module logs information by the kernel
-				# about the detected boards
-
-
-Configuring the board:
-
-# This interface will use the Cisco-HDLC line protocol,
-# the timeslices assigned are 1,2 (128 KiBit line speed)
-# (the first data timeslice in the G.703 frame is no. 1)
-#
-mkdir /proc/comx/comx0.1/
-echo slicecom	>/proc/comx/comx0.1/boardtype
-echo hdlc	>/proc/comx/comx0.1/protocol
-echo 1 2	>/proc/comx/comx0.1/timeslots
-
-
-# This interface uses SyncPPP line protocol, the assigned 
-# is no. 3 (64 KiBit line speed)
-#
-mkdir /proc/comx/comx0.2/
-echo slicecom	>/proc/comx/comx0.2/boardtype
-echo ppp	>/proc/comx/comx0.2/protocol
-echo 3		>/proc/comx/comx0.2/timeslots
-
-...
-
-ifconfig comx0.1 up
-ifconfig comx0.2 up
-
------------------------------------------------------------------
-
-The COMX interfaces use a 10 packet transmit queue by default, however WAN
-networks sometimes use bigger values (20 to 100), to utilize the line better
-by large traffic (though the line delay increases because of more packets
-join the queue).
-
-# ifconfig comx0 txqueuelen 50
-
-This option is only supported by the ifconfig command of the later 
-distributions, which came with 2.2 kernels, such as RedHat 6.1 or Debian 2.2.
-
-You can download a newer netbase packet from 
-http://www.debian.org/~rcw/2.2/netbase/ for Debian 2.1, which has a new
-ifconfig. You can get further information about using 2.2 kernel with
-Debian 2.1 from http://www.debian.org/releases/stable/running-kernel-2.2
-
------------------------------------------------------------------
-
-The SliceCom LEDs:
-
-red	- on, if the interface is unconfigured, or it gets Remote Alarm-s
-green	- on, if the board finds frame-sync in the received signal 	
-
-A bit more detailed:
-
-red:	green:	meaning:
-
--	-	no frame-sync, no signal received, or signal SNAFU.
--	on	"Everything is OK"
-on	on	Reception is ok, but the remote end sends Remote Alarm
-on	-	The interface is unconfigured
-
------------------------------------------------------------------
-
-A more detailed description of the hardware setting options:
-
-The general and the protocol layer options described in the 'comx.txt' file
-apply to the SliceCom as well, I only summarize the SliceCom hardware specific
-settings below.
-
-The '/proc/comx' configuring interface:
-
-An interface directory should be created for every timeslot group with
-'mkdir', e,g: 'comx0', 'comx1' etc. The timeslots can be assigned here to the
-specific interface. The Cisco-like naming convention (serial3:1 - first
-timeslot group of the 3rd. board) can't be used here, because these mean IP
-aliasing in Linux.
-
-You can give any meaningful name to keep the configuration clear; 
-e.g: 'comx0.1', 'comx0.2', 'comx1.1', comx1.2', if you have two boards
-with two interfaces each.
-
-Settings, which apply to the board:
-
-Neither 'io' nor 'irq' settings required, the driver uses the resources
-given by the PCI BIOS.
-
-comx0/boardnum	- board number of the SliceCom in the PC (using the 'natural'
-		PCI order) as listed in '/proc/pci' or the output of the
-	 	'lspci' command, generally the slots nearer to the motherboard
-		PCI driver chips have the lower numbers.
-		
-		Default: 0 (the counting starts with 0)
-
-Though the options below are to be set on a single interface, they apply to the
-whole board. The restriction, to use them on 'UP' interfaces, is because the 
-command sequence below could lead to unpredictable results.
-
-	# echo 0        >boardnum
-	# echo internal >clock_source
-	# echo 1        >boardnum
-
-The sequence would set the clock source of board 0.
-
-These settings will persist after all the interfaces are cleared, but are
-cleared when the driver module is unloaded and loaded again.
-
-comx0/clock_source - source of the transmit clock
-	Usage:
-
-	# echo line     >/proc/comx/comx0/clock_source
-	# echo internal >/proc/comx/comx0/clock_source
-
-	line	- The Tx clock is being decoded if the input data stream,
-		if no clock seen on the input, then the board will use it's
-		own clock generator.
-
-	internal - The Tx clock is supplied by the builtin clock generator. 	
-
-	Default: line
-
-	Normally, the telecommunication company's end device (the HDSL
-	modem) provides the Tx clock, that's why 'line' is the default.
-
-comx0/framing	- Switching CRC4 off/on
-
-	CRC4: 16 PCM frames (The 32 64Kibit channels are multiplexed into a
-	PCM frame, nothing to do with HDLC frames) are divided into 2x8
-	groups, each group has a 4 bit CRC.
-
-	# echo crc4	>/proc/comx/comx0/framing
-	# echo no-crc4	>/proc/comx/comx0/framing
-
-	Default is 'crc4', the Hungarian MATAV lines behave like this. 
-	The traffic generally passes if this setting on both ends don't match.
-
-comx0/linecode	- Setting the line coding
-
-	# echo hdb3	>/proc/comx/comx0/linecode
-	# echo ami	>/proc/comx/comx0/linecode
-
-	Default a 'hdb3', MATAV lines use this.
-	
-	(AMI coding is rarely used with E1 lines). Frame sync may occur, if
-	this setting doesn't match the other end's, but CRC4 and data errors
-	will come, which will result in CRC errors on HDLC/SyncPPP level. 
-
-comx0/reg	- direct access to the board's MUNICH (reg) and FALC (lbireg)
-comx0/lbireg	circuit's registers  
-
-	# echo >reg 0x04 0x0	- write 0 to register 4
-	# echo >reg 0x104	- write the contents of register 4 with
-				printk() to syslog
-
-WARNING! These are only for development purposes, messing with this will
-	result much trouble!
-
-comx0/loopback - Places a loop to the board's G.703 signals
-
-	# echo none   >/proc/comx/comx0/loopback
-	# echo local  >/proc/comx/comx0/loopback
-	# echo remote >/proc/comx/comx0/loopback
-
-	none   - normal operation, no loop
-	local  - the board receives it's own output
-	remote - the board sends the received data to the remote side
-
-	Default: none
-
------------------------------------------------------------------
-
-Interface (channel group in Cisco terms) settings: 
-
-comx0/timeslots	- which timeslots belong to the given interface
-
-	Setting:
-
-	# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots
-
-	# cat /proc/comx/comx0/timeslots
-	1 2 5 6 7 8 
-	#
-
-	Finding a timeslot: 
-
-	# grep ' 4' /proc/comx/comx*/timeslots
-	/proc/comx/comx0/timeslots:1 3 4 5 6
-	#
-
-	The timeslots can be in any order, '1 2 3' is the same as '1 3 2'.
-
-	The interface has to be DOWN during the setting ('ifconfig comx0
-	down'), but the other interfaces could operate normally.
-
-	The driver checks if the assigned timeslots are vacant, if not, then
-	the setting won't be applied.
-
-	The timeslot values are treated as decimal numbers, not to misunderstand
-	values of 08, 09 form.
-
------------------------------------------------------------------
-
-Checking the interface and board status:
-
-- Lines beginning with ' ' (space) belong to the original output, the lines
-which begin with '//' are the comments.
-
- papaya:~$ cat /proc/comx/comx1/status
- Interface administrative status is UP, modem status is UP, protocol is UP
- Modem status changes: 0, Transmitter status is IDLE, tbusy: 0
- Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m)
-               (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m)
- Debug flags: none
- RX errors: len: 22, overrun: 1, crc: 0, aborts: 0
-            buffer overrun: 0, pbuffer overrun: 0
- TX errors: underrun: 0
- Line keepalive (value: 10) status UP [0]
-
-// The hardware specific part starts here:
- Controller status:
-         No alarms
-
-// Alarm: 
-//
-// No alarms - Everything OK
-//
-// LOS  - Loss Of Signal - No signal sensed on the input
-// AIS  - Alarm Indication Signal - The remote side sends '11111111'-s, 
-//	it tells, that there's an error condition, or it's not
-//	initialised.
-// AUXP - Auxiliary Pattern Indication - 01010101.. received.
-// LFA  - Loss of Frame Alignment - no frame sync received.
-// RRA  - Receive Remote Alarm - the remote end's OK, but signals error cond.
-// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync.
-// NMF  - No Multiframe alignment Found after 400 msec - no such alarm using
-//	no-crc4 or crc4 framing, see below.
-//
-// Other possible error messages:
-//
-// Transmit Line Short - the board felt, that it's output is short-circuited,
-// 	so it switched the transmission off. (The board can't definitely tell,
-//	that it's output is short-circuited.)
-
-// Chained list of the received packets, for debug purposes:
-
- Rx ring:
-         rafutott: 0
-         lastcheck: 50845731, jiffies: 51314281
-         base: 017b1858
-         rx_desc_ptr: 0
-         rx_desc_ptr: 017b1858
-         hw_curr_ptr: 017b1858
-         06040000 017b1868 017b1898 c016ff00
-         06040000 017b1878 017b1e9c c016ff00
-         46040000 017b1888 017b24a0 c016ff00
-         06040000 017b1858 017b2aa4 c016ff00
-
-// All the interfaces using the board: comx1, using the 1,2,...16 timeslots,
-// comx2, using timeslot 17, etc.
-
- Interfaces using this board: (channel-group, interface, timeslots)
-          0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-          1 comx2: 17
-          2 comx3: 18
-          3 comx4: 19
-          4 comx5: 20
-          5 comx6: 21
-          6 comx7: 22
-          7 comx8: 23
-          8 comx9: 24
-          9 comx10: 25
-         10 comx11: 26
-         11 comx12: 27
-         12 comx13: 28
-         13 comx14: 29
-         14 comx15: 30
-         15 comx16: 31
-
-// The number of events handled by the driver during an interrupt cycle:
-
- Interrupt work histogram:
- hist[ 0]:        0 hist[ 1]:        2 hist[ 2]:    18574 hist[ 3]:       79
- hist[ 4]:       14 hist[ 5]:        1 hist[ 6]:        0 hist[ 7]:        1
- hist[ 8]:        0 hist[ 9]:        7
-
-// The number of packets to send in the Tx ring, when a new one arrived:
-
- Tx ring histogram:
- hist[ 0]:     2329 hist[ 1]:        0 hist[ 2]:        0 hist[ 3]:        0
-
-// The error counters of the E1 interface, according to the RFC2495,
-// (similar to the Cisco "show controllers e1" command's output:
-// http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126)
-
-Data in current interval (91 seconds elapsed):
-   9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors
-   0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs
-Data in Interval 1 (15 minutes):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 4 intervals (1 hour):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 96 intervals (24 hours):
-   0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
-   0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
-   0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-
------------------------------------------------------------------
-
-Some unique options, (may get into the driver later):
-Treat them very carefully, these can cause much trouble!
-
-	modified CRC-4, for improved interworking of CRC-4 and non-CRC-4
-	devices: (see page 107 and g706 Annex B)
-		lbireg[ 0x1b ] |= 0x08
-		lbireg[ 0x1c ] |= 0xc0
-
-	- The NMF - 'No Multiframe alignment Found after 400 msec' alarm 
-	comes into account.
-
-	FALC - the line driver chip.
-	local loop - I hear my transmission back.
-	remote loop - I echo the remote transmission back.
-
-	Something useful for finding errors:
-	
-		- local loop for timeslot 1 in the FALC chip:
-
-	# echo >lbireg 0x1d 0x21
-
-		- Switching the loop off:
-
-	# echo >lbireg 0x1d 0x00
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index a96e853..ac1be25 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -52,6 +52,7 @@
       i) Freescale QUICC Engine module (QE)
       j) CFI or JEDEC memory-mapped NOR flash
       k) Global Utilities Block
+      l) Xilinx IP cores
 
   VII - Specifying interrupt information for devices
     1) interrupts property
@@ -851,12 +852,18 @@
         /cpus/PowerPC,970FX@0
         /cpus/PowerPC,970FX@1
       (unit addresses do not require leading zeroes)
-    - d-cache-line-size : one cell, L1 data cache line size in bytes
-    - i-cache-line-size : one cell, L1 instruction cache line size in
+    - d-cache-block-size : one cell, L1 data cache block size in bytes (*)
+    - i-cache-block-size : one cell, L1 instruction cache block size in
       bytes
     - d-cache-size : one cell, size of L1 data cache in bytes
     - i-cache-size : one cell, size of L1 instruction cache in bytes
 
+(*) The cache "block" size is the size on which the cache management
+instructions operate. Historically, this document used the cache
+"line" size here which is incorrect. The kernel will prefer the cache
+block size and will fallback to cache line size for backward
+compatibility.
+
   Recommended properties:
 
     - timebase-frequency : a cell indicating the frequency of the
@@ -870,6 +877,10 @@
       for the above, the common code doesn't use that property, but
       you are welcome to re-use the pSeries or Maple one. A future
       kernel version might provide a common function for this.
+    - d-cache-line-size : one cell, L1 data cache line size in bytes
+      if different from the block size
+    - i-cache-line-size : one cell, L1 instruction cache line size in
+      bytes if different from the block size
 
   You are welcome to add any property you find relevant to your board,
   like some information about the mechanism used to soft-reset the
@@ -2242,6 +2253,266 @@
 			   available.
 			   For Axon: 0x0000012a
 
+   l) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellanious
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the C_BASEADDR parameter.
+	(HW_VER):	from the HW_VER parameter.
+	(size):		equals C_HIGHADDR - C_BASEADDR + 1
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb-uartlite-0@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb-intc>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In this case,
+   the device should still describe the whole IP core with a single node
+   and add a child node for each logical device.  The ranges property can
+   be used to translate from parent IP-core to the registers of each device.
+   (Note: this makes the assumption that both logical devices have the same
+   bus binding.  If this is not true, then separate nodes should be used for
+   each logical device).  The 'cell-index' property can be used to enumerate
+   logical devices within an IP core.  For example, the following is the
+   system.mhs entry for the dual ps2 controller found on the ml403 reference
+   design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0@a9000000 {
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb-intc>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb-intc>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb-v34-0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb-bram-if-cntrl-0@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb-v20-0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb-uart16550-0@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb-intc-0@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+      
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Requred properties:
+       - current-speed : Baud rate of uartlite
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt
index c931d61..e20b19c 100644
--- a/Documentation/rtc.txt
+++ b/Documentation/rtc.txt
@@ -180,9 +180,10 @@
     *	RTC_IRQP_SET, RTC_IRQP_READ: the irq_set_freq function will be called
 	to set the frequency while the framework will handle the read for you
 	since the frequency is stored in the irq_freq member of the rtc_device
-	structure.  Also make sure you set the max_user_freq member in your
-	initialization routines so the framework can sanity check the user
-	input for you.
+	structure.  Your driver needs to initialize the irq_freq member during
+	init.  Make sure you check the requested frequency is in range of your
+	hardware in the irq_set_freq function.  If you cannot actually change
+	the frequency, just return -ENOTTY.
 
 If all else fails, check out the rtc-test.c driver!
 
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a302668..37f0e3c 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -8,4 +8,7 @@
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
+ 10 -> Hauppauge WinTV HVR 900                  (em2880)
+ 11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
+ 13 -> Terratec Prodigy XS                      (em2880)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6c0e44b..cad0882 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -787,23 +787,25 @@
 P:	Michael Buesch
 M:	mb@bu3sch.de
 P:	Stefano Brivio
-M:	st3@riseup.net
+M:	stefano.brivio@polimi.it
 L:	linux-wireless@vger.kernel.org
-W:	http://bcm43xx.berlios.de/
+W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 
 B43LEGACY WIRELESS DRIVER
 P:	Larry Finger
 M:	Larry.Finger@lwfinger.net
+P:	Stefano Brivio
+M:	stefano.brivio@polimi.it
 L:	linux-wireless@vger.kernel.org
-W:	http://bcm43xx.berlios.de/
+W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 
 BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION)
 P:	Larry Finger
 M:	Larry.Finger@lwfinger.net
 P:	Stefano Brivio
-M:	st3@riseup.net
+M:	stefano.brivio@polimi.it
 L:	linux-wireless@vger.kernel.org
 W:	http://bcm43xx.berlios.de/
 S:	Maintained
@@ -2549,7 +2551,7 @@
 
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley
-M:	jejb@steeleye.com
+M:	James.Bottomley@HansenPartnership.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
@@ -3301,9 +3303,11 @@
 
 SCSI SUBSYSTEM
 P:	James E.J. Bottomley
-M:	James.Bottomley@SteelEye.com
+M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git
 S:	Maintained
 
 SCSI TAPE DRIVER
@@ -3450,15 +3454,10 @@
 S:	Maintained
 
 SOFTMAC LAYER (IEEE 802.11)
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
-P:	Joe Jezak
-M:	josejx@gentoo.org
 P:	Daniel Drake
 M:	dsd@gentoo.org
-W:	http://softmac.sipsolutions.net/
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Obsolete
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
diff --git a/Makefile b/Makefile
index 188c3b6..a65ffd2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 24
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*
@@ -197,8 +197,13 @@
 UTS_MACHINE 	:= $(ARCH)
 SRCARCH 	:= $(ARCH)
 
-# for i386 and x86_64 we use SRCARCH equal to x86
-SRCARCH := $(if $(filter x86_64 i386,$(SRCARCH)),x86,$(SRCARCH))
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
 
 KCONFIG_CONFIG	?= .config
 
@@ -528,9 +533,22 @@
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(CPPFLAGS)
-KBUILD_AFLAGS   += $(AFLAGS)
-KBUILD_CFLAGS   += $(CFLAGS)
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+        $(call warn-assign,CPPFLAGS)
+        KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+        $(call warn-assign,AFLAGS)
+        KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+        $(call warn-assign,CFLAGS)
+        KBUILD_CFLAGS += $(KCFLAGS)
+endif
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
@@ -1314,12 +1332,7 @@
 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
 endif
 
-# Take care of arch/x86
-ifeq ($(ARCH), $(SRCARCH))
-ALLSOURCE_ARCHS := $(ARCH)
-else
-ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
-endif
+ALLSOURCE_ARCHS := $(SRCARCH)
 
 define find-sources
         ( for arch in $(ALLSOURCE_ARCHS) ; do \
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a0cdaaf..a7e9fea 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1040,6 +1040,8 @@
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/watchdog/Kconfig"
+
 source "drivers/ssb/Kconfig"
 
 #source "drivers/l3/Kconfig"
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1873bd8..bc91d6e 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -16,6 +16,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/f75375s.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -200,11 +201,21 @@
 	.resource	= &n2100_uart_resource,
 };
 
+static struct f75375s_platform_data n2100_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
 		.type = "rs5c372b",
 	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.type = "f75375",
+		.platform_data = &n2100_f75375s,
+	},
 };
 
 /*
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index bd5184f..ca9c5b6 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -190,15 +190,15 @@
 		goto exit;
 
 	if (!request_mem_region
-	    (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj)))
+	    (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
 		goto exit_free;
 
 	if (!request_mem_region
-	    (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj)))
+	    (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
 		goto exit_release_1;
 
 	if (!request_mem_region
-	    (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj)))
+	    (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
 		goto exit_release_2;
 
 	x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 5da7982..61d9c9d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -150,22 +150,45 @@
 	local_irq_enable();
 }
 
+static const struct clkops clk_pxa3xx_cken_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+};
+
 static const struct clkops clk_pxa3xx_hsio_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 	.getrate	= clk_pxa3xx_hsio_getrate,
 };
 
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
 static struct clk pxa3xx_clks[] = {
-	INIT_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
-	INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+	PXA3xx_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+	PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
 
-	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
 
-	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  UDC,  48000000, 5, &pxa_device_udc.dev),
+	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
+	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
 };
 
 void __init pxa3xx_init_irq(void)
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index a2d45d7..fbfa192 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -68,6 +68,7 @@
 	if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
 		/* Disarm the compare/match, signal the event. */
 		OIER &= ~OIER_E0;
+		OSSR = OSSR_M0;
 		c->event_handler(c);
 	} else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
 		/* Call the event handler as many times as necessary
@@ -100,9 +101,9 @@
 		 * anything that might put us "very close".
 	 */
 #define MIN_OSCR_DELTA 16
-	do {
+		do {
 			OSSR = OSSR_M0;
-		next_match = (OSMR0 += LATCH);
+			next_match = (OSMR0 += LATCH);
 			c->event_handler(c);
 		} while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
 			 && (c->mode == CLOCK_EVT_MODE_PERIODIC));
@@ -114,14 +115,16 @@
 static int
 pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long irqflags;
+	unsigned long flags, next, oscr;
 
-	raw_local_irq_save(irqflags);
-	OSMR0 = OSCR + delta;
-	OSSR = OSSR_M0;
+	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
-	raw_local_irq_restore(irqflags);
-	return 0;
+	next = OSCR + delta;
+	OSMR0 = next;
+	oscr = OSCR;
+	raw_local_irq_restore(flags);
+
+	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
 
 static void
@@ -132,15 +135,16 @@
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		raw_local_irq_save(irqflags);
-		OSMR0 = OSCR + LATCH;
 		OSSR = OSSR_M0;
 		OIER |= OIER_E0;
+		OSMR0 = OSCR + LATCH;
 		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
 		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
+		OSSR = OSSR_M0;
 		raw_local_irq_restore(irqflags);
 		break;
 
@@ -149,6 +153,7 @@
 		/* initializing, released, or preparing for suspend */
 		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
+		OSSR = OSSR_M0;
 		raw_local_irq_restore(irqflags);
 		break;
 
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index cefdf2f..333a82a 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -322,7 +322,6 @@
 
 		if (off < kern_size &&
 		    user_size <= (kern_size - off)) {
-			vma->vm_flags |= VM_RESERVED;
 			ret = remap_pfn_range(vma, vma->vm_start,
 					      page_to_pfn(c->vm_pages) + off,
 					      user_size << PAGE_SHIFT,
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 4493bcf..ee40c1a0 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -171,7 +171,7 @@
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void omapfb_reserve_sdram(void)
+void __init omapfb_reserve_sdram(void)
 {
 	struct bootmem_data	*bdata;
 	unsigned long		sdram_start, sdram_size;
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index bbecbd8..4f402c9 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -19,9 +19,6 @@
 	  There is an AVR32 Linux project with a web page at
 	  http://avr32linux.org/.
 
-config UID16
-	bool
-
 config GENERIC_GPIO
 	bool
 	default y
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index a9d9ec0..7c4388f 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -474,7 +474,7 @@
 static struct resource at32_wdt0_resource[] = {
 	{
 		.start	= 0xfff000b0,
-		.end	= 0xfff000bf,
+		.end	= 0xfff000cf,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -690,7 +690,7 @@
 	IRQ(6),
 };
 DEFINE_DEV_DATA(atmel_usart, 0);
-DEV_CLK(usart, atmel_usart0, pba, 4);
+DEV_CLK(usart, atmel_usart0, pba, 3);
 
 static struct atmel_uart_data atmel_usart1_data = {
 	.use_dma_tx	= 1,
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index 704607f..fa427ed 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define DEBUG
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/init.h>
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index dd5c009..0b286cd 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
+#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"
@@ -136,7 +137,8 @@
 	panic("Interrupt controller initialization failed!\n");
 }
 
-unsigned long intc_get_pending(int group)
+unsigned long intc_get_pending(unsigned int group)
 {
 	return intc_readl(&intc0, INTREQ0 + 4 * group);
 }
+EXPORT_SYMBOL_GPL(intc_get_pending);
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 21900a9..222da15 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -13,6 +13,10 @@
 	bool
 	default y
 
+config NO_DMA
+	bool
+	default y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -57,6 +61,10 @@
 
 source "fs/Kconfig.binfmt"
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
 config ETRAX_CMDLINE
 	string "Kernel command line"
 	default "root=/dev/mtdblock3"
@@ -149,7 +157,8 @@
 
 # bring in ETRAX built-in drivers
 menu "Drivers for built-in interfaces"
-source arch/cris/arch-v10/drivers/Kconfig
+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
+source arch/cris/arch/drivers/Kconfig
 
 endmenu
 
@@ -180,6 +189,10 @@
 
 source "drivers/telephony/Kconfig"
 
+source "drivers/i2c/Kconfig"
+
+source "drivers/rtc/Kconfig"
+
 #
 # input before char - char/joystick depends on it. As does USB.
 #
@@ -194,6 +207,10 @@
 
 source "sound/Kconfig"
 
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "kernel/Kconfig.instrumentation"
diff --git a/arch/cris/arch-v10/defconfig b/arch/cris/arch-v10/defconfig
index 710c20b..572f119 100644
--- a/arch/cris/arch-v10/defconfig
+++ b/arch/cris/arch-v10/defconfig
@@ -99,7 +99,6 @@
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_AMDSTD=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_ETRAX_I2C=y
@@ -145,7 +144,6 @@
 # CONFIG_MTD_CFI_GEOMETRY is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_AMDSTD=y
 # CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_NORA is not set
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 03e2e68..faf8b4d 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -2,6 +2,7 @@
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
 	  controller.
@@ -605,8 +606,6 @@
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_AMDSTD
-	select MTD_OBSOLETE_CHIPS
-	select MTD_AMDSTD
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index efd7b0f..ea3cf2e 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -312,12 +312,12 @@
                "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
 	       map_cs->name, map_cs->size, map_cs->map_priv_1);
 
-#ifdef CONFIG_MTD_AMDSTD
-	mtd_cs = do_map_probe("amd_flash", map_cs);
-#endif
 #ifdef CONFIG_MTD_CFI
+	mtd_cs = do_map_probe("cfi_probe", map_cs);
+#endif
+#ifdef CONFIG_MTD_JEDECPROBE
 	if (!mtd_cs) {
-		mtd_cs = do_map_probe("cfi_probe", map_cs);
+		mtd_cs = do_map_probe("jedec_probe", map_cs);
 	}
 #endif
 
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index f389ed6..0d347a7 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -297,8 +297,10 @@
 		data = *R_PORT_PB_DATA;
 	else if (priv->minor == GPIO_MINOR_G)
 		data = *R_PORT_G_DATA;
-	else
+	else {
+		spin_unlock(&gpio_lock);
 		return 0;
+	}
 	
 	if ((data & priv->highalarm) ||
 	    (~data & priv->lowalarm)) {
@@ -381,18 +383,21 @@
 
 	ssize_t retval = count;
 	if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
-		return -EFAULT;
+		retval = -EFAULT;
+		goto out;
 	}
     
 	if (!access_ok(VERIFY_READ, buf, count)) {
-		return -EFAULT;
+		retval = -EFAULT;
+		goto out;
 	}
 	clk_mask = priv->clk_mask;
 	data_mask = priv->data_mask;
 	/* It must have been configured using the IO_CFG_WRITE_MODE */
 	/* Perhaps a better error code? */
 	if (clk_mask == 0 || data_mask == 0) {
-		return -EPERM;
+		retval = -EPERM;
+		goto out;
 	}
 	write_msb = priv->write_msb;
 	D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
@@ -425,6 +430,7 @@
 			}
 		}
 	}
+out:
 	spin_unlock(&gpio_lock);
 	return retval;
 }
@@ -506,6 +512,7 @@
 	while (p) {
 		if (p->highalarm | p->lowalarm) {
 			gpio_some_alarms = 1;
+			spin_unlock(&gpio_lock);
 			return 0;
 		}
 		p = p->next;
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index c5844cb..ec62c95 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -500,9 +500,8 @@
 	;; deal with pending signals and notify-resume requests
 
 	move.d	$r9, $r10	; do_notify_resume syscall/irq param
-	moveq	0, $r11		; oldset param - 0 in this case
-	move.d	$sp, $r12	; the regs param
-	move.d  $r1, $r13	; the thread_info_flags parameter
+	move.d	$sp, $r11	; the regs param
+	move.d  $r1, $r12	; the thread_info_flags parameter
 	jsr	do_notify_resume
 	
 	ba _Rexit
@@ -678,13 +677,19 @@
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
 
+	;; If there is a glitch on the NMI pin shorter than ~100ns
+	;; (i.e. non-active by the time we get here) then the nmi_pin bit
+	;; in R_IRQ_MASK0_RD will already be cleared.  The watchdog_nmi bit
+	;; is cleared by us however (when feeding the watchdog), which is why
+	;; we use that bit to determine what brought us here.
+
 	move.d	[R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
-	and.d   0x80000000, $r1
-	beq	wdog
+	and.d   (1<<30), $r1
+	bne	wdog
 	move.d  $sp, $r10
 	jsr	handle_nmi
 	setf m			; Enable NMI again
-	retb			; Return from NMI
+	ba	_Rexit		; Return the standard way
 	nop
 wdog:
 #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
@@ -775,22 +780,9 @@
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
 	
-	moveq	2, $r2		; first bit we care about is the timer0 irq
-	move.d	[R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq
-	move.d	$r0, [R_VECT_MASK_CLR] ; Block all active IRQs
-1:	
-	btst	$r2, $r0	; check for the irq given by bit r2
-	bpl	2f
-	move.d  $r2, $r10	; First argument to do_IRQ
-	move.d  $sp, $r11	; second argument to do_IRQ
-	jsr	do_IRQ
-2:
-	addq	1, $r2		; next vector bit
-	cmp.b	32, $r2
-	bne	1b	; process all irq's up to and including number 31
-	moveq	0, $r9  ; make ret_from_intr realise we came from an ir
+	move.d  $sp, $r10
+	jsr	do_multiple_IRQ
 	
-	move.d	$r0, [R_VECT_MASK_SET] ;  Unblock all the IRQs
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -837,6 +829,13 @@
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
 	
+	.global kernel_execve
+kernel_execve:
+	move.d __NR_execve, $r9
+	break 13
+	ret
+	nop
+
 	.data
 
 hw_bp_trigs:
@@ -1135,6 +1134,42 @@
 	.long sys_add_key
 	.long sys_request_key
 	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get		/* 290 */
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
+	.long sys_move_pages
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat		/* 320 */
+	.long sys_signalfd
+	.long sys_timerfd
+	.long sys_eventfd
+	.long sys_fallocate
 
         /*
          * NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index d3ea052..c1a3a21 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -1,97 +1,9 @@
-/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
+/*
  * linux/arch/cris/kernel/fasttimer.c
  *
  * Fast timers for ETRAX100/ETRAX100LX
- * This may be useful in other OS than Linux so use 2 space indentation...
  *
- * $Log: fasttimer.c,v $
- * Revision 1.9  2005/03/04 08:16:16  starvik
- * Merge of Linux 2.6.11.
- *
- * Revision 1.8  2005/01/05 06:09:29  starvik
- * cli()/sti() will be obsolete in 2.6.11.
- *
- * Revision 1.7  2005/01/03 13:35:46  starvik
- * Removed obsolete stuff.
- * Mark fast timer IRQ as not shared.
- *
- * Revision 1.6  2004/05/14 10:18:39  starvik
- * Export fast_timer_list
- *
- * Revision 1.5  2004/05/14 07:58:01  starvik
- * Merge of changes from 2.4
- *
- * Revision 1.4  2003/07/04 08:27:41  starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.3  2002/12/12 08:26:32  starvik
- * Don't use C-comments inside CVS comments
- *
- * Revision 1.2  2002/12/11 15:42:02  starvik
- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
- *
- * Revision 1.1  2002/11/18 07:58:06  starvik
- * Fast timers (from Linux 2.4)
- *
- * Revision 1.5  2002/10/15 06:21:39  starvik
- * Added call to init_waitqueue_head
- *
- * Revision 1.4  2002/05/28 17:47:59  johana
- * Added del_fast_timer()
- *
- * Revision 1.3  2002/05/28 16:16:07  johana
- * Handle empty fast_timer_list
- *
- * Revision 1.2  2002/05/27 15:38:42  johana
- * Made it compile without warnings on Linux 2.4.
- * (includes, wait_queue, PROC_FS and snprintf)
- *
- * Revision 1.1  2002/05/27 15:32:25  johana
- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
- *
- * Revision 1.8  2001/11/27 13:50:40  pkj
- * Disable interrupts while stopping the timer and while modifying the
- * list of active timers in timer1_handler() as it may be interrupted
- * by other interrupts (e.g., the serial interrupt) which may add fast
- * timers.
- *
- * Revision 1.7  2001/11/22 11:50:32  pkj
- * * Only store information about the last 16 timers.
- * * proc_fasttimer_read() now uses an allocated buffer, since it
- *   requires more space than just a page even for only writing the
- *   last 16 timers. The buffer is only allocated on request, so
- *   unless /proc/fasttimer is read, it is never allocated.
- * * Renamed fast_timer_started to fast_timers_started to match
- *   fast_timers_added and fast_timers_expired.
- * * Some clean-up.
- *
- * Revision 1.6  2000/12/13 14:02:08  johana
- * Removed volatile for fast_timer_list
- *
- * Revision 1.5  2000/12/13 13:55:35  johana
- * Added DEBUG_LOG, added som cli() and cleanup
- *
- * Revision 1.4  2000/12/05 13:48:50  johana
- * Added range check when writing proc file, modified timer int handling
- *
- * Revision 1.3  2000/11/23 10:10:20  johana
- * More debug/logging possibilities.
- * Moved GET_JIFFIES_USEC() to timex.h and time.c
- *
- * Revision 1.2  2000/11/01 13:41:04  johana
- * Clean up and bugfixes.
- * Created new do_gettimeofday_fast() that gets a timeval struct
- * with time based on jiffies and *R_TIMER0_DATA, uses a table
- * for fast conversion of timer value to microseconds.
- * (Much faster the standard do_gettimeofday() and we don't really
- * want to use the true time - we want the "uptime" so timers don't screw up
- * when we change the time.
- * TODO: Add efficient support for continuous timers as well.
- *
- * Revision 1.1  2000/10/26 15:49:16  johana
- * Added fasttimer, highresolution timers.
- *
- * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden
+ * Copyright (C) 2000-2007 Axis Communications AB, Lund, Sweden
  */
 
 #include <linux/errno.h>
@@ -125,7 +37,7 @@
 
 #ifdef FAST_TIMER_SANITY_CHECKS
 #define SANITYCHECK(x) x
-static int sanity_failed = 0;
+static int sanity_failed;
 #else
 #define SANITYCHECK(x)
 #endif
@@ -134,15 +46,13 @@
 #define D2(x)
 #define DP(x)
 
-#define __INLINE__ inline
-
-static int fast_timer_running = 0;
-static int fast_timers_added = 0;
-static int fast_timers_started = 0;
-static int fast_timers_expired = 0;
-static int fast_timers_deleted = 0;
-static int fast_timer_is_init = 0;
-static int fast_timer_ints = 0;
+static unsigned int fast_timer_running;
+static unsigned int fast_timers_added;
+static unsigned int fast_timers_started;
+static unsigned int fast_timers_expired;
+static unsigned int fast_timers_deleted;
+static unsigned int fast_timer_is_init;
+static unsigned int fast_timer_ints;
 
 struct fast_timer *fast_timer_list = NULL;
 
@@ -150,8 +60,8 @@
 #define DEBUG_LOG_MAX 128
 static const char * debug_log_string[DEBUG_LOG_MAX];
 static unsigned long debug_log_value[DEBUG_LOG_MAX];
-static int debug_log_cnt = 0;
-static int debug_log_cnt_wrapped = 0;
+static unsigned int debug_log_cnt;
+static unsigned int debug_log_cnt_wrapped;
 
 #define DEBUG_LOG(string, value) \
 { \
@@ -206,45 +116,29 @@
 int timer_delay_settings[NUM_TIMER_STATS];
 
 /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
-void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
+inline void do_gettimeofday_fast(struct fasttime_t *tv)
 {
-  unsigned long sec = jiffies;
-  unsigned long usec = GET_JIFFIES_USEC();
-
-  usec += (sec % HZ) * (1000000 / HZ);
-  sec = sec / HZ;
-
-  if (usec > 1000000)
-  {
-    usec -= 1000000;
-    sec++;
-  }
-  tv->tv_sec = sec;
-  tv->tv_usec = usec;
+	tv->tv_jiff = jiffies;
+	tv->tv_usec = GET_JIFFIES_USEC();
 }
 
-int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
+inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1)
 {
-  if (t0->tv_sec < t1->tv_sec)
-  {
-    return -1;
-  }
-  else if (t0->tv_sec > t1->tv_sec)
-  {
-    return 1;
-  }
-  if (t0->tv_usec < t1->tv_usec)
-  {
-    return -1;
-  }
-  else if (t0->tv_usec > t1->tv_usec)
-  {
-    return 1;
-  }
-  return 0;
+	/* Compare jiffies. Takes care of wrapping */
+	if (time_before(t0->tv_jiff, t1->tv_jiff))
+		return -1;
+	else if (time_after(t0->tv_jiff, t1->tv_jiff))
+		return 1;
+
+	/* Compare us */
+	if (t0->tv_usec < t1->tv_usec)
+		return -1;
+	else if (t0->tv_usec > t1->tv_usec)
+		return 1;
+	return 0;
 }
 
-void __INLINE__ start_timer1(unsigned long delay_us)
+inline void start_timer1(unsigned long delay_us)
 {
   int freq_index = 0; /* This is the lowest resolution */
   unsigned long upper_limit = MAX_DELAY_US;
@@ -285,7 +179,7 @@
   timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index;
   timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
 
-  D1(printk("start_timer1 : %d us freq: %i div: %i\n",
+	D1(printk(KERN_DEBUG "start_timer1 : %d us freq: %i div: %i\n",
             delay_us, freq_index, div));
   /* Clear timer1 irq */
   *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
@@ -340,7 +234,7 @@
         printk(KERN_WARNING
                "timer name: %s data: 0x%08lX already in list!\n", name, data);
         sanity_failed++;
-        return;
+				goto done;
       }
       else
       {
@@ -356,11 +250,11 @@
   t->name = name;
 
   t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
-  t->tv_expires.tv_sec  = t->tv_set.tv_sec  + delay_us / 1000000;
+	t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ;
   if (t->tv_expires.tv_usec > 1000000)
   {
     t->tv_expires.tv_usec -= 1000000;
-    t->tv_expires.tv_sec++;
+		t->tv_expires.tv_jiff += HZ;
   }
 #ifdef FAST_TIMER_LOG
   timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
@@ -368,7 +262,7 @@
   fast_timers_added++;
 
   /* Check if this should timeout before anything else */
-  if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+	if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
   {
     /* Put first in list and modify the timer value */
     t->prev = NULL;
@@ -384,8 +278,8 @@
     start_timer1(delay_us);
   } else {
     /* Put in correct place in list */
-    while (tmp->next &&
-           timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0)
+		while (tmp->next && fasttime_cmp(&t->tv_expires,
+				&tmp->next->tv_expires) > 0)
     {
       tmp = tmp->next;
     }
@@ -401,6 +295,7 @@
 
   D2(printk("start_one_shot_timer: %d us done\n", delay_us));
 
+done:
   local_irq_restore(flags);
 } /* start_one_shot_timer */
 
@@ -444,11 +339,18 @@
 /* Timer 1 interrupt handler */
 
 static irqreturn_t
-timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
+timer1_handler(int irq, void *dev_id)
 {
   struct fast_timer *t;
   unsigned long flags;
 
+	/* We keep interrupts disabled not only when we modify the
+	 * fast timer list, but any time we hold a reference to a
+	 * timer in the list, since del_fast_timer may be called
+	 * from (another) interrupt context.  Thus, the only time
+	 * when interrupts are enabled is when calling the timer
+	 * callback function.
+	 */
   local_irq_save(flags);
 
   /* Clear timer1 irq */
@@ -466,18 +368,19 @@
   fast_timer_running = 0;
   fast_timer_ints++;
 
-  local_irq_restore(flags);
-
   t = fast_timer_list;
   while (t)
   {
-    struct timeval tv;
+		struct fasttime_t tv;
+		fast_timer_function_type *f;
+		unsigned long d;
 
     /* Has it really expired? */
     do_gettimeofday_fast(&tv);
-    D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
+		D1(printk(KERN_DEBUG "t: %is %06ius\n",
+			tv.tv_jiff, tv.tv_usec));
 
-    if (timeval_cmp(&t->tv_expires, &tv) <= 0)
+		if (fasttime_cmp(&t->tv_expires, &tv) <= 0)
     {
       /* Yes it has expired */
 #ifdef FAST_TIMER_LOG
@@ -486,7 +389,6 @@
       fast_timers_expired++;
 
       /* Remove this timer before call, since it may reuse the timer */
-      local_irq_save(flags);
       if (t->prev)
       {
         t->prev->next = t->next;
@@ -501,16 +403,23 @@
       }
       t->prev = NULL;
       t->next = NULL;
-      local_irq_restore(flags);
 
-      if (t->function != NULL)
-      {
-        t->function(t->data);
-      }
-      else
-      {
+			/* Save function callback data before enabling
+			 * interrupts, since the timer may be removed and
+			 * we don't know how it was allocated
+			 * (e.g. ->function and ->data may become overwritten
+			 * after deletion if the timer was stack-allocated).
+			 */
+			f = t->function;
+			d = t->data;
+
+			if (f != NULL) {
+				/* Run callback with interrupts enabled. */
+				local_irq_restore(flags);
+				f(d);
+				local_irq_save(flags);
+			} else
         DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints);
-      }
     }
     else
     {
@@ -518,16 +427,20 @@
       D1(printk(".\n"));
     }
 
-    local_irq_save(flags);
     if ((t = fast_timer_list) != NULL)
     {
       /* Start next timer.. */
-      long us;
-      struct timeval tv;
+			long us = 0;
+			struct fasttime_t tv;
 
       do_gettimeofday_fast(&tv);
-      us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
-            t->tv_expires.tv_usec - tv.tv_usec);
+
+			/* time_after_eq takes care of wrapping */
+			if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff))
+				us = ((t->tv_expires.tv_jiff - tv.tv_jiff) *
+					1000000 / HZ + t->tv_expires.tv_usec -
+					tv.tv_usec);
+
       if (us > 0)
       {
         if (!fast_timer_running)
@@ -537,7 +450,6 @@
 #endif
           start_timer1(us);
         }
-        local_irq_restore(flags);
         break;
       }
       else
@@ -548,9 +460,10 @@
         D1(printk("e! %d\n", us));
       }
     }
-    local_irq_restore(flags);
   }
 
+	local_irq_restore(flags);
+
   if (!t)
   {
     D1(printk("t1 stop!\n"));
@@ -575,28 +488,17 @@
 void schedule_usleep(unsigned long us)
 {
   struct fast_timer t;
-#ifdef DECLARE_WAITQUEUE
   wait_queue_head_t sleep_wait;
   init_waitqueue_head(&sleep_wait);
-  {
-  DECLARE_WAITQUEUE(wait, current);
-#else
-  struct wait_queue *sleep_wait = NULL;
-  struct wait_queue wait = { current, NULL };
-#endif
 
   D1(printk("schedule_usleep(%d)\n", us));
-  add_wait_queue(&sleep_wait, &wait);
-  set_current_state(TASK_INTERRUPTIBLE);
   start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
                        "usleep");
-  schedule();
-  set_current_state(TASK_RUNNING);
-  remove_wait_queue(&sleep_wait, &wait);
+	/* Uninterruptible sleep on the fast timer. (The condition is somewhat
+	 * redundant since the timer is what wakes us up.) */
+	wait_event(sleep_wait, !fast_timer_pending(&t));
+
   D1(printk("done schedule_usleep(%d)\n", us));
-#ifdef DECLARE_WAITQUEUE
-  }
-#endif  
 }
 
 #ifdef CONFIG_PROC_FS
@@ -616,7 +518,7 @@
   unsigned long flags;
   int i = 0;
   int num_to_show;
-  struct timeval tv;
+	struct fasttime_t tv;
   struct fast_timer *t, *nextt;
   static char *bigbuf = NULL;
   static unsigned long used;
@@ -624,7 +526,8 @@
   if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
   {
     used = 0;
-    bigbuf[0] = '\0';
+	if (buf)
+		buf[0] = '\0';
     return 0;
   }
 
@@ -646,7 +549,7 @@
     used += sprintf(bigbuf + used, "Fast timer running:    %s\n",
                     fast_timer_running ? "yes" : "no");
     used += sprintf(bigbuf + used, "Current time:          %lu.%06lu\n",
-                    (unsigned long)tv.tv_sec,
+			(unsigned long)tv.tv_jiff,
                     (unsigned long)tv.tv_usec);
 #ifdef FAST_TIMER_SANITY_CHECKS
     used += sprintf(bigbuf + used, "Sanity failed:         %i\n",
@@ -696,9 +599,9 @@
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -718,9 +621,9 @@
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -738,9 +641,9 @@
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -761,15 +664,15 @@
 /*                      " func: 0x%08lX" */
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
 /*                      , t->function */
                       );
-      local_irq_disable();
+	local_irq_save(flags);
       if (t->next != nextt)
       {
         printk(KERN_WARNING "timer removed!\n");
@@ -798,7 +701,7 @@
 static struct fast_timer tr[10];
 static int exp_num[10];
 
-static struct timeval tv_exp[100];
+static struct fasttime_t tv_exp[100];
 
 static void test_timeout(unsigned long data)
 {
@@ -836,7 +739,7 @@
   int prev_num;
   int j;
 
-  struct timeval tv, tv0, tv1, tv2;
+	struct fasttime_t tv, tv0, tv1, tv2;
 
   printk("fast_timer_test() start\n");
   do_gettimeofday_fast(&tv);
@@ -849,7 +752,8 @@
   {
     do_gettimeofday_fast(&tv_exp[j]);
   }
-  printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
+	printk(KERN_DEBUG "fast_timer_test() %is %06i\n",
+		tv.tv_jiff, tv.tv_usec);
 
   for (j = 0; j < 1000; j++)
   {
@@ -858,12 +762,12 @@
   }
   for (j = 0; j < 100; j++)
   {
-    printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
-           tv_exp[j].tv_sec,tv_exp[j].tv_usec,
-           tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
-           tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
-           tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
-           tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
+		printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+			tv_exp[j].tv_jiff, tv_exp[j].tv_usec,
+			tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec,
+			tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec,
+			tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec,
+			tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec);
     j += 4;
   }
   do_gettimeofday_fast(&tv0);
@@ -895,9 +799,12 @@
     }
   }
   do_gettimeofday_fast(&tv2);
-  printk("Timers started    %is %06i\n", tv0.tv_sec, tv0.tv_usec);
-  printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
-  printk("Timers done       %is %06i\n", tv2.tv_sec, tv2.tv_usec);
+	printk(KERN_DEBUG "Timers started    %is %06i\n",
+		tv0.tv_jiff, tv0.tv_usec);
+	printk(KERN_DEBUG "Timers started at %is %06i\n",
+		tv1.tv_jiff, tv1.tv_usec);
+	printk(KERN_DEBUG "Timers done       %is %06i\n",
+		tv2.tv_jiff, tv2.tv_usec);
   DP(printk("buf0:\n");
      printk(buf0);
      printk("buf1:\n");
@@ -919,9 +826,9 @@
     printk("%-10s set: %6is %06ius exp: %6is %06ius "
            "data: 0x%08X func: 0x%08X\n",
            t->name,
-           t->tv_set.tv_sec,
+			t->tv_set.tv_jiff,
            t->tv_set.tv_usec,
-           t->tv_expires.tv_sec,
+			t->tv_expires.tv_jiff,
            t->tv_expires.tv_usec,
            t->data,
            t->function
@@ -929,10 +836,12 @@
 
     printk("           del: %6ius     did exp: %6is %06ius as #%i error: %6li\n",
            t->delay_us,
-           tv_exp[j].tv_sec,
+			tv_exp[j].tv_jiff,
            tv_exp[j].tv_usec,
            exp_num[j],
-           (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
+			(tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) *
+				1000000 + tv_exp[j].tv_usec -
+				t->tv_expires.tv_usec);
   }
   proc_fasttimer_read(buf5, NULL, 0, 0, 0);
   printk("buf5 after all done:\n");
@@ -942,7 +851,7 @@
 #endif
 
 
-void fast_timer_init(void)
+int fast_timer_init(void)
 {
   /* For some reason, request_irq() hangs when called froom time_init() */
   if (!fast_timer_is_init)
@@ -975,4 +884,6 @@
     fast_timer_test();
 #endif
   }
+	return 0;
 }
+__initcall(fast_timer_init);
diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c
index 29d48ad..3a9114e 100644
--- a/arch/cris/arch-v10/kernel/io_interface_mux.c
+++ b/arch/cris/arch-v10/kernel/io_interface_mux.c
@@ -304,7 +304,7 @@
 static struct if_group *get_group(const unsigned char groups)
 {
 	int i;
-	for (i = 0; i < sizeof(if_groups)/sizeof(struct if_group); i++) {
+	for (i = 0; i < ARRAY_SIZE(if_groups); i++) {
 		if (groups & if_groups[i].group) {
 			return &if_groups[i];
 		}
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 845c95f..e06ab00 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -12,10 +12,16 @@
  */
 
 #include <asm/irq.h>
+#include <asm/current.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
 #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
 #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
@@ -75,8 +81,8 @@
 BUILD_IRQ(13, 0x2000)
 void mmu_bus_fault(void);      /* IRQ 14 is the bus fault interrupt */
 void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
-BUILD_IRQ(16, 0x10000)
-BUILD_IRQ(17, 0x20000)
+BUILD_IRQ(16, 0x10000 | 0x20000)  /* ethernet tx interrupt needs to block rx */
+BUILD_IRQ(17, 0x20000 | 0x10000)  /* ...and vice versa */
 BUILD_IRQ(18, 0x40000)
 BUILD_IRQ(19, 0x80000)
 BUILD_IRQ(20, 0x100000)
@@ -147,6 +153,55 @@
 void do_sigtrap(void); /* from entry.S */
 void gdb_handle_breakpoint(void); /* from entry.S */
 
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+/* Handle multiple IRQs */
+void do_multiple_IRQ(struct pt_regs* regs)
+{
+	int bit;
+	unsigned masked;
+	unsigned mask;
+	unsigned ethmask = 0;
+
+	/* Get interrupts to mask and handle */
+	mask = masked = *R_VECT_MASK_RD;
+
+	/* Never mask timer IRQ */
+	mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
+
+	/*
+	 * If either ethernet interrupt (rx or tx) is active then block
+	 * the other one too. Unblock afterwards also.
+	 */
+	if (mask &
+	    (IO_STATE(R_VECT_MASK_RD, dma0, active) |
+	     IO_STATE(R_VECT_MASK_RD, dma1, active))) {
+		ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
+			   IO_MASK(R_VECT_MASK_RD, dma1));
+	}
+
+	/* Block them */
+	*R_VECT_MASK_CLR = (mask | ethmask);
+
+	/* An extra irq_enter here to prevent softIRQs to run after
+	 * each do_IRQ. This will decrease the interrupt latency.
+	 */
+	irq_enter();
+
+	/* Handle all IRQs */
+	for (bit = 2; bit < 32; bit++) {
+		if (masked & (1 << bit)) {
+			do_IRQ(bit, regs);
+		}
+	}
+
+	/* This irq_exit() will trigger the soft IRQs. */
+	irq_exit();
+
+	/* Unblock the IRQs again */
+	*R_VECT_MASK_SET = (masked | ethmask);
+}
+
 /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
    setting the irq vector table.
 */
diff --git a/arch/cris/arch-v10/kernel/setup.c b/arch/cris/arch-v10/kernel/setup.c
index 682ef95..de27b50 100644
--- a/arch/cris/arch-v10/kernel/setup.c
+++ b/arch/cris/arch-v10/kernel/setup.c
@@ -13,6 +13,7 @@
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/delay.h>
+#include <linux/param.h>
 
 #ifdef CONFIG_PROC_FS
 #define HAS_FPU		0x0001
@@ -56,8 +57,8 @@
 
 	revision = rdvr();
 
-	if (revision >= sizeof cpu_info/sizeof *cpu_info)
-		info = &cpu_info[sizeof cpu_info/sizeof *cpu_info - 1];
+	if (revision >= ARRAY_SIZE(cpu_info))
+		info = &cpu_info[ARRAY_SIZE(cpu_info) - 1];
 	else
 		info = &cpu_info[revision];
 
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 575a14b..5976f61 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -1,5 +1,4 @@
-/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $
- *
+/*
  *  linux/arch/cris/arch-v10/kernel/time.c
  *
  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
@@ -20,6 +19,7 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/rtc.h>
+#include <asm/irq_regs.h>
 
 /* define this if you need to use print_timestamp */
 /* it will make jiffies at 96 hz instead of 100 hz though */
@@ -201,8 +201,9 @@
 extern void cris_do_profile(struct pt_regs *regs);
 
 static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+timer_interrupt(int irq, void *dev_id)
 {
+	struct pt_regs *regs = get_irq_regs();
 	/* acknowledge the timer irq */
 
 #ifdef USE_CASCADE_TIMERS
@@ -221,9 +222,11 @@
 #endif
 
 	/* reset watchdog otherwise it resets us! */
-
 	reset_watchdog();
 	
+	/* Update statistics. */
+	update_process_times(user_mode(regs));
+
 	/* call the real timer interrupt handler */
 
 	do_timer(1);
diff --git a/arch/cris/arch-v10/lib/memset.c b/arch/cris/arch-v10/lib/memset.c
index 82bb668..42c1101 100644
--- a/arch/cris/arch-v10/lib/memset.c
+++ b/arch/cris/arch-v10/lib/memset.c
@@ -66,7 +66,7 @@
 
   {
     register char *dst __asm__ ("r13") = pdst;
- 
+
   /* This is NONPORTABLE, but since this whole routine is     */
   /* grossly nonportable that doesn't matter.                 */
 
@@ -110,52 +110,52 @@
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       "r13=r13, r12=r12, r11=r11" */
-    __asm__ volatile ("
-        ;; Check that the following is true (same register names on
-        ;; both sides of equal sign, as in r8=r8):
-        ;; %0=r13, %1=r12, %4=r11
-        ;;
-	;; Save the registers we'll clobber in the movem process
-	;; on the stack.  Don't mention them to gcc, it will only be
-	;; upset.
-	subq 	11*4,$sp
-        movem   $r10,[$sp]
-
-        move.d  $r11,$r0
-        move.d  $r11,$r1
-        move.d  $r11,$r2
-        move.d  $r11,$r3
-        move.d  $r11,$r4
-        move.d  $r11,$r5
-        move.d  $r11,$r6
-        move.d  $r11,$r7
-        move.d  $r11,$r8
-        move.d  $r11,$r9
-        move.d  $r11,$r10
-
-        ;; Now we've got this:
-	;; r13 - dst
-	;; r12 - n
-	
-        ;; Update n for the first loop
-        subq    12*4,$r12
-0:
-        subq   12*4,$r12
-        bge     0b
-	movem	$r11,[$r13+]
-
-        addq   12*4,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-        movem [$sp+],$r10" 
+    __asm__ volatile ("\n\
+	;; Check that the following is true (same register names on	\n\
+	;; both sides of equal sign, as in r8=r8):			\n\
+	;; %0=r13, %1=r12, %4=r11					\n\
+	;;								\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	move.d	$r11,$r0						\n\
+	move.d	$r11,$r1						\n\
+	move.d	$r11,$r2						\n\
+	move.d	$r11,$r3						\n\
+	move.d	$r11,$r4						\n\
+	move.d	$r11,$r5						\n\
+	move.d	$r11,$r6						\n\
+	move.d	$r11,$r7						\n\
+	move.d	$r11,$r8						\n\
+	move.d	$r11,$r9						\n\
+	move.d	$r11,$r10						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq	12*4,$r12						\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+									\n\
+	addq	12*4,$r12 ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem	[$sp+],$r10"
 
      /* Outputs */ : "=r" (dst), "=r" (n)
      /* Inputs */ : "0" (dst), "1" (n), "r" (lc));
-    
+
   }
 
     /* Either we directly starts copying, using dword copying
-       in a loop, or we copy as much as possible with 'movem' 
+       in a loop, or we copy as much as possible with 'movem'
        and then the last block (<44 bytes) is copied here.
        This will work since 'movem' will have updated src,dst,n. */
 
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
index 15d6662..7161a2b 100644
--- a/arch/cris/arch-v10/lib/string.c
+++ b/arch/cris/arch-v10/lib/string.c
@@ -95,33 +95,33 @@
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("
-        ;; Check that the following is true (same register names on
-        ;; both sides of equal sign, as in r8=r8):
-        ;; %0=r13, %1=r11, %2=r12
-        ;;
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq 	11*4,$sp
-	movem	$r10,[$sp]
-
-        ;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-	
-        ;; Update n for the first loop
-        subq    44,$r12
-0:
-	movem	[$r11+],$r10
-        subq   44,$r12
-        bge     0b
-	movem	$r10,[$r13+]
-
-        addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-        movem [$sp+],$r10" 
+    __asm__ volatile ("\n\
+	;; Check that the following is true (same register names on	\n\
+	;; both sides of equal sign, as in r8=r8):			\n\
+	;; %0=r13, %1=r11, %2=r12					\n\
+	;;								\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq	44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+	addq	44,$r12 ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem	[$sp+],$r10"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) 
      /* Inputs */ : "0" (dst), "1" (src), "2" (n));
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
index a12c708..b8e6c04 100644
--- a/arch/cris/arch-v10/lib/usercopy.c
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -92,58 +92,58 @@
 	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	44,$r12
-
-; Since the noted PC of a faulting instruction in a delay-slot of a taken
-; branch, is that of the branch target, we actually point at the from-movem
-; for this case.  There is no ambiguity here; if there was a fault in that
-; instruction (meaning a kernel oops), the faulted PC would be the address
-; after *that* movem.
-
-0:
-	movem	[$r11+],$r10
-	subq   44,$r12
-	bge	0b
-	movem	$r10,[$r13+]
-1:
-	addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-2:
-	.section .fixup,\"ax\"
-
-; To provide a correct count in r10 of bytes that failed to be copied,
-; we jump back into the loop if the loop-branch was taken.  There is no
-; performance penalty for sany use; the program will segfault soon enough.
-
-3:
-	move.d [$sp],$r10
-	addq 44,$r10
-	move.d $r10,[$sp]
-	jump 0b
-4:
-	movem [$sp+],$r10
-	addq 44,$r10
-	addq 44,$r12
-	jump 2b
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 0b,3b
-	.dword 1b,4b
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+									\n\
+; Since the noted PC of a faulting instruction in a delay-slot of a taken \n\
+; branch, is that of the branch target, we actually point at the from-movem \n\
+; for this case.  There is no ambiguity here; if there was a fault in that \n\
+; instruction (meaning a kernel oops), the faulted PC would be the address \n\
+; after *that* movem.							\n\
+									\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+1:									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+; To provide a correct count in r10 of bytes that failed to be copied,	\n\
+; we jump back into the loop if the loop-branch was taken.  There is no	\n\
+; performance penalty for sany use; the program will segfault soon enough.\n\
+									\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 44,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	jump 0b								\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 44,$r10							\n\
+	addq 44,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
@@ -253,59 +253,59 @@
        If you want to check that the allocation was right; then
        check the equalities in the first comment.  It should say
        "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("
+    __asm__ volatile ("\n\
 	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	44,$r12
-0:
-	movem	[$r11+],$r10
-1:
-	subq   44,$r12
-	bge	0b
-	movem	$r10,[$r13+]
-
-	addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-4:
-	.section .fixup,\"ax\"
-
-;; Do not jump back into the loop if we fail.  For some uses, we get a
-;; page fault somewhere on the line.  Without checking for page limits,
-;; we don't know where, but we need to copy accurately and keep an
-;; accurate count; not just clear the whole line.  To do that, we fall
-;; down in the code below, proceeding with smaller amounts.  It should
-;; be kept in mind that we have to cater to code like what at one time
-;; was in fs/super.c:
-;;  i = size - copy_from_user((void *)page, data, size);
-;; which would cause repeated faults while clearing the remainder of
-;; the SIZE bytes at PAGE after the first fault.
-;; A caveat here is that we must not fall through from a failing page
-;; to a valid page.
-
-3:
-	movem  [$sp+],$r10
-	addq	44,$r12 ;; Get back count before faulting point.
-	subq	44,$r11 ;; Get back pointer to faulting movem-line.
-	jump	4b	;; Fall through, pretending the fault didn't happen.
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 1b,3b
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+1:									\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+4:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+;; Do not jump back into the loop if we fail.  For some uses, we get a	\n\
+;; page fault somewhere on the line.  Without checking for page limits,	\n\
+;; we don't know where, but we need to copy accurately and keep an	\n\
+;; accurate count; not just clear the whole line.  To do that, we fall	\n\
+;; down in the code below, proceeding with smaller amounts.  It should	\n\
+;; be kept in mind that we have to cater to code like what at one time	\n\
+;; was in fs/super.c:							\n\
+;;  i = size - copy_from_user((void *)page, data, size);		\n\
+;; which would cause repeated faults while clearing the remainder of	\n\
+;; the SIZE bytes at PAGE after the first fault.			\n\
+;; A caveat here is that we must not fall through from a failing page	\n\
+;; to a valid page.							\n\
+									\n\
+3:									\n\
+	movem  [$sp+],$r10						\n\
+	addq	44,$r12 ;; Get back count before faulting point.	\n\
+	subq	44,$r11 ;; Get back pointer to faulting movem-line.	\n\
+	jump	4b	;; Fall through, pretending the fault didn't happen.\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 1b,3b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
@@ -425,64 +425,64 @@
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       something like "r13=r13, r11=r11, r12=r12". */
-    __asm__ volatile ("
+    __asm__ volatile ("\n\
 	.ifnc %0%1%2,$r13$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll clobber in the movem process
-	;; on the stack.  Don't mention them to gcc, it will only be
-	;; upset.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	clear.d $r0
-	clear.d $r1
-	clear.d $r2
-	clear.d $r3
-	clear.d $r4
-	clear.d $r5
-	clear.d $r6
-	clear.d $r7
-	clear.d $r8
-	clear.d $r9
-	clear.d $r10
-	clear.d $r11
-
-	;; Now we've got this:
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	12*4,$r12
-0:
-	subq   12*4,$r12
-	bge	0b
-	movem	$r11,[$r13+]
-1:
-	addq   12*4,$r12        ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-2:
-	.section .fixup,\"ax\"
-3:
-	move.d [$sp],$r10
-	addq 12*4,$r10
-	move.d $r10,[$sp]
-	clear.d $r10
-	jump 0b
-
-4:
-	movem [$sp+],$r10
-	addq 12*4,$r10
-	addq 12*4,$r12
-	jump 2b
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 0b,3b
-	.dword 1b,4b
+									\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	clear.d $r0							\n\
+	clear.d $r1							\n\
+	clear.d $r2							\n\
+	clear.d $r3							\n\
+	clear.d $r4							\n\
+	clear.d $r5							\n\
+	clear.d $r6							\n\
+	clear.d $r7							\n\
+	clear.d $r8							\n\
+	clear.d $r9							\n\
+	clear.d $r10							\n\
+	clear.d $r11							\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq   12*4,$r12						\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+1:									\n\
+	addq   12*4,$r12        ;; compensate for last loop underflowing n\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 12*4,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	clear.d $r10							\n\
+	jump 0b								\n\
+									\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 12*4,$r10							\n\
+	addq 12*4,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index cc6ba54..7f72d7c 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -362,8 +362,6 @@
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_AMDSTD
-	select MTD_OBSOLETE_CHIPS
-	select MTD_AMDSTD
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 3ec12ea..c5ff95e 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -190,13 +190,12 @@
 	       "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
 	       map_cs->name, map_cs->size, map_cs->map_priv_1);
 
-#ifdef CONFIG_MTD_AMDSTD
-	mtd_cs = do_map_probe("amd_flash", map_cs);
-#endif
 #ifdef CONFIG_MTD_CFI
-	if (!mtd_cs) {
 		mtd_cs = do_map_probe("cfi_probe", map_cs);
-	}
+#endif
+#ifdef CONFIG_MTD_JEDECPROBE
+	if (!mtd_cs)
+		mtd_cs = do_map_probe("jedec_probe", map_cs);
 #endif
 
 	return mtd_cs;
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index df89298..d581b0a 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -185,7 +185,7 @@
 	}
 };
 
-#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port))
+#define NUMBER_OF_PORTS ARRAY_SIZE(ports)
 
 static const struct file_operations sync_serial_fops = {
 	.owner   = THIS_MODULE,
diff --git a/arch/cris/arch-v32/kernel/cache.c b/arch/cris/arch-v32/kernel/cache.c
new file mode 100644
index 0000000..80da7b8
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/cache.c
@@ -0,0 +1,33 @@
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/arch/cache.h>
+#include <asm/arch/hwregs/dma.h>
+
+/* This file is used to workaround a cache bug, Guinness TR 106. */
+
+inline void flush_dma_descr(struct dma_descr_data *descr, int flush_buf)
+{
+	/* Flush descriptor to make sure we get correct in_eop and after. */
+	asm volatile ("ftagd [%0]" :: "r" (descr));
+	/* Flush buffer pointed out by descriptor. */
+	if (flush_buf)
+		cris_flush_cache_range(phys_to_virt((unsigned)descr->buf),
+				(unsigned)(descr->after - descr->buf));
+}
+EXPORT_SYMBOL(flush_dma_descr);
+
+void flush_dma_list(struct dma_descr_data *descr)
+{
+	while (1) {
+		flush_dma_descr(descr, 1);
+		if (descr->eol)
+			break;
+		descr = phys_to_virt((unsigned)descr->next);
+	}
+}
+EXPORT_SYMBOL(flush_dma_list);
+
+/* From cacheflush.S */
+EXPORT_SYMBOL(cris_flush_cache);
+/* From cacheflush.S */
+EXPORT_SYMBOL(cris_flush_cache_range);
diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S
new file mode 100644
index 0000000..956e8fb
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/cacheflush.S
@@ -0,0 +1,94 @@
+	.global cris_flush_cache_range
+cris_flush_cache_range:
+	move.d 1024, $r12
+	cmp.d $r11, $r12
+	bhi cris_flush_1KB
+	nop
+	add.d $r10, $r11
+	ftagd [$r10]
+cris_flush_last:
+	addq 32, $r10
+	cmp.d $r11, $r10
+	blt cris_flush_last
+	ftagd [$r10]
+	ret
+	nop
+cris_flush_1KB:
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ba cris_flush_cache_range
+	sub.d $r12, $r11
+
+	.global cris_flush_cache
+cris_flush_cache:
+	moveq 0, $r10
+cris_flush_line:
+	move.d 16*1024, $r11
+	addq 16, $r10
+	cmp.d $r10, $r11
+	blt cris_flush_line
+	fidxd [$r10]
+	ret
+	nop
diff --git a/arch/cris/arch-v32/kernel/io.c b/arch/cris/arch-v32/kernel/io.c
index dfbfcb8..a22a9e0 100644
--- a/arch/cris/arch-v32/kernel/io.c
+++ b/arch/cris/arch-v32/kernel/io.c
@@ -49,7 +49,7 @@
 	}
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led1_green;
 struct crisv32_iopin crisv32_led1_red;
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
index 4662f36..72e9e83 100644
--- a/arch/cris/arch-v32/kernel/setup.c
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -54,12 +54,10 @@
 {
 	int i;
 	int cpu = (int)v - 1;
-	int entries;
 	unsigned long revision;
 	struct cpu_info *info;
 
-	entries = sizeof cpinfo / sizeof(struct cpu_info);
-	info = &cpinfo[entries - 1];
+	info = &cpinfo[ARRAY_SIZE(cpinfo) - 1];
 
 #ifdef CONFIG_SMP
 	if (!cpu_online(cpu))
@@ -68,7 +66,7 @@
 
 	revision = rdvr();
 
-	for (i = 0; i < entries; i++) {
+	for (i = 0; i < ARRAY_SIZE(cpinfo); i++) {
 		if (cpinfo[i].rev == revision) {
 			info = &cpinfo[i];
 			break;
diff --git a/arch/cris/defconfig b/arch/cris/defconfig
index 142a108..9c33ae6 100644
--- a/arch/cris/defconfig
+++ b/arch/cris/defconfig
@@ -226,8 +226,6 @@
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
-CONFIG_MTD_AMDSTD=y
 # CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_JEDEC is not set
 
@@ -276,6 +274,7 @@
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -302,16 +301,14 @@
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_IDE is not set
+# CONFIG_PARIDE is not set
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
@@ -321,7 +318,6 @@
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -329,6 +325,7 @@
 # SCSI device support
 #
 # CONFIG_SCSI is not set
+# CONFIG_ISCSI_TCP is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -414,26 +411,11 @@
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-# CONFIG_BT_SCO is not set
-CONFIG_BT_RFCOMM=y
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_BT is not set
+# CONFIG_I2C is not set
 
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=y
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -485,31 +467,17 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT is not set
 
 #
 # Input I/O drivers
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
 
 #
 # Input Device Drivers
@@ -525,6 +493,7 @@
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -542,6 +511,8 @@
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -559,6 +530,8 @@
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_RTC_LIB is not set
+# CONFIG_RTC_CLASS is not set
 
 #
 # Ftape, the floppy tape device driver
@@ -660,7 +633,9 @@
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -686,9 +661,21 @@
 # CONFIG_SOUND is not set
 
 #
+# Generic devices
+#
+# CONFIG_SND_MPU401_UART is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_NET_PCMCIA is not set
 
 #
 # PC-card bridges
@@ -734,6 +721,7 @@
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# HID_SUPPORT is not set
 
 #
 # USB HID Boot Protocol drivers
@@ -829,7 +817,7 @@
 
 #
 # Hardware crypto devices
-#
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c
index 105bb5e..62f0e75 100644
--- a/arch/cris/kernel/crisksyms.c
+++ b/arch/cris/kernel/crisksyms.c
@@ -27,6 +27,7 @@
 extern void __ashldi3(void);
 extern void __ashrdi3(void);
 extern void __lshrdi3(void);
+extern void __negdi2(void);
 extern void iounmap(volatile void * __iomem);
 
 /* Platform dependent support */
@@ -34,19 +35,6 @@
 EXPORT_SYMBOL(get_cmos_time);
 EXPORT_SYMBOL(loops_per_usec);
 
-/* String functions */
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-
 /* Math functions */
 EXPORT_SYMBOL(__Udiv);
 EXPORT_SYMBOL(__Umod);
@@ -55,6 +43,7 @@
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
 
 /* Memory functions */
 EXPORT_SYMBOL(__ioremap);
@@ -84,4 +73,4 @@
 EXPORT_SYMBOL(del_fast_timer);
 EXPORT_SYMBOL(schedule_usleep);
 #endif
-
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 5c27ff8..2dfac8c 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -2,7 +2,7 @@
  *
  *	linux/arch/cris/kernel/irq.c
  *
- *      Copyright (c) 2000,2001 Axis Communications AB
+ *      Copyright (c) 2000,2007 Axis Communications AB
  *
  *      Authors: Bjorn Wesen (bjornw@axis.com)
  *
@@ -92,14 +92,16 @@
 asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
 {
 	unsigned long sp;
+	struct pt_regs *old_regs = set_irq_regs(regs);
 	irq_enter();
 	sp = rdsp();
 	if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) {
 		printk("do_IRQ: stack overflow: %lX\n", sp);
 		show_stack(NULL, (unsigned long *)sp);
 	}
-	__do_IRQ(irq, regs);
+	__do_IRQ(irq);
         irq_exit();
+	set_irq_regs(old_regs);
 }
 
 void weird_irq(void)
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 123451c..9ca558f 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -195,6 +195,11 @@
  */
 void (*pm_idle)(void);
 
+extern void default_idle(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 /*
  * The idle thread. There's no useful work to be
  * done, so just try to conserve power and have a
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 1085d03..3ccd20e 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -81,13 +81,13 @@
 /* notification of userspace execution resumption
  * - triggered by current->work.notify_resume
  */
-extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal(int canrestart, struct pt_regs *regs);
 
 
-void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, 
+void do_notify_resume(int canrestart, struct pt_regs *regs,
 		      __u32 thread_info_flags  )
 {
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(canrestart,oldset,regs);
+		do_signal(canrestart,regs);
 }
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index 514359b..8b99841 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/mm.h>
+#include <linux/fs.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/sem.h>
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index acfd045..7a2cc7e 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -171,10 +171,6 @@
 	mon = CMOS_READ(RTC_MONTH);
 	year = CMOS_READ(RTC_YEAR);
 
-	printk(KERN_DEBUG
-	       "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
-	       sec, min, hour, day, mon, year);
-
 	BCD_TO_BIN(sec);
 	BCD_TO_BIN(min);
 	BCD_TO_BIN(hour);
@@ -207,12 +203,12 @@
 cris_do_profile(struct pt_regs* regs)
 {
 
-#if CONFIG_SYSTEM_PROFILER
+#ifdef CONFIG_SYSTEM_PROFILER
         cris_profile_sample(regs);
 #endif
 
-#if CONFIG_PROFILING
-        profile_tick(CPU_PROFILING, regs);
+#ifdef CONFIG_PROFILING
+        profile_tick(CPU_PROFILING);
 #endif
 }
 
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 4103c2c..b841ecf 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -197,7 +197,7 @@
 /*
  * free the memory that was only required for initialisation
  */
-void __init free_initmem(void)
+void free_initmem(void)
 {
 #if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL)
 	unsigned long start, end, addr;
diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c
index 1189d03..bf6d9d8 100644
--- a/arch/ia64/hp/sim/boot/fw-emu.c
+++ b/arch/ia64/hp/sim/boot/fw-emu.c
@@ -285,7 +285,7 @@
 	}
 	cmd_line[arglen] = '\0';
 
-	memset(efi_systab, 0, sizeof(efi_systab));
+	memset(efi_systab, 0, sizeof(*efi_systab));
 	efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE;
 	efi_systab->hdr.revision  = ((1 << 16) | 00);
 	efi_systab->hdr.headersize = sizeof(efi_systab->hdr);
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index 466bbcb..c5c872b 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -290,7 +290,6 @@
 #define _ASM_IA64_ELF_H		/* Don't include elf.h */
 
 #include <linux/sched.h>
-#include <asm/processor.h>
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore
new file mode 100644
index 0000000..9830775
--- /dev/null
+++ b/arch/ia64/kernel/.gitignore
@@ -0,0 +1 @@
+gate.lds
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 3d45d24..897e208 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -678,9 +678,11 @@
 	/* I/O APIC */
 
 	if (acpi_table_parse_madt
-	    (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1)
-		printk(KERN_ERR PREFIX
-		       "Error parsing MADT - no IOSAPIC entries\n");
+	    (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
+		if (!ia64_platform_is("sn2"))
+			printk(KERN_ERR PREFIX
+			       "Error parsing MADT - no IOSAPIC entries\n");
+	}
 
 	/* System-Level Interrupt Routing */
 
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 6216eba..8e8f8b6 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -218,9 +218,10 @@
 {
 	efi_time_t tm;
 
-	memset(ts, 0, sizeof(ts));
-	if ((*efi.get_time)(&tm, NULL) != EFI_SUCCESS)
+	if ((*efi.get_time)(&tm, NULL) != EFI_SUCCESS) {
+		memset(ts, 0, sizeof(*ts));
 		return;
+	}
 
 	ts->tv_sec = mktime(tm.year, tm.month, tm.day, tm.hour, tm.minute, tm.second);
 	ts->tv_nsec = tm.nanosecond;
@@ -1112,7 +1113,7 @@
 		if (md->num_pages == 0) /* should not happen */
 			continue;
 
-		flags = IORESOURCE_MEM;
+		flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		switch (md->type) {
 
 			case EFI_MEMORY_MAPPED_IO:
@@ -1134,12 +1135,11 @@
 
 			case EFI_ACPI_MEMORY_NVS:
 				name = "ACPI Non-volatile Storage";
-				flags |= IORESOURCE_BUSY;
 				break;
 
 			case EFI_UNUSABLE_MEMORY:
 				name = "reserved";
-				flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+				flags |= IORESOURCE_DISABLED;
 				break;
 
 			case EFI_RESERVED_TYPE:
@@ -1148,7 +1148,6 @@
 			case EFI_ACPI_RECLAIM_MEMORY:
 			default:
 				name = "reserved";
-				flags |= IORESOURCE_BUSY;
 				break;
 		}
 
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index cfe4654..274a593 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -748,6 +748,15 @@
 #endif
 }
 
+static inline unsigned char choose_dmode(void)
+{
+#ifdef CONFIG_SMP
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		return IOSAPIC_LOWEST_PRIORITY;
+#endif
+	return IOSAPIC_FIXED;
+}
+
 /*
  * ACPI can describe IOSAPIC interrupts via static tables and namespace
  * methods.  This provides an interface to register those interrupts and
@@ -762,6 +771,7 @@
 	unsigned long flags;
 	struct iosapic_rte_info *rte;
 	u32 low32;
+	unsigned char dmode;
 
 	/*
 	 * If this GSI has already been registered (i.e., it's a
@@ -791,8 +801,8 @@
 
 	spin_lock(&irq_desc[irq].lock);
 	dest = get_target_cpu(gsi, irq);
-	err = register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY,
-			    polarity, trigger);
+	dmode = choose_dmode();
+	err = register_intr(gsi, irq, dmode, polarity, trigger);
 	if (err < 0) {
 		spin_unlock(&irq_desc[irq].lock);
 		irq = err;
@@ -961,10 +971,12 @@
 {
 	int vector, irq;
 	unsigned int dest = cpu_physical_id(smp_processor_id());
+	unsigned char dmode;
 
 	irq = vector = isa_irq_to_vector(isa_irq);
 	BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL));
-	register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY, polarity, trigger);
+	dmode = choose_dmode();
+	register_intr(gsi, irq, dmode, polarity, trigger);
 
 	DBG("ISA: IRQ %u -> GSI %u (%s,%s) -> CPU %d (0x%04x) vector %d\n",
 	    isa_irq, gsi, trigger == IOSAPIC_EDGE ? "edge" : "level",
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 44be1c95..6dee579 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -61,9 +61,11 @@
 	unsigned long flags;
 
 	if (i == 0) {
-		seq_printf(p, "           ");
+		char cpuname[16];
+		seq_printf(p, "     ");
 		for_each_online_cpu(j) {
-			seq_printf(p, "CPU%d       ",j);
+			snprintf(cpuname, 10, "CPU%d", j);
+			seq_printf(p, "%10s ", cpuname);
 		}
 		seq_putc(p, '\n');
 	}
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index cc87025..10b48cd 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -571,7 +571,7 @@
  *  Outputs
  *      None
  */
-static void __init
+void
 ia64_mca_register_cpev (int cpev)
 {
 	/* Register the CPE interrupt vector with SAL */
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 6ef6ffb..396004e 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -470,7 +470,7 @@
 	return p - page;
 }
 
-static const char *proc_features[]={
+static char *proc_features_0[]={		/* Feature set 0 */
 	NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
 	NULL,NULL,NULL,NULL,NULL,NULL,NULL, NULL,NULL,
 	NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,
@@ -502,25 +502,92 @@
 	"Enable BERR promotion"
 };
 
+static char *proc_features_16[]={		/* Feature set 16 */
+	"Disable ETM",
+	"Enable ETM",
+	"Enable MCA on half-way timer",
+	"Enable snoop WC",
+	NULL,
+	"Enable Fast Deferral",
+	"Disable MCA on memory aliasing",
+	"Enable RSB",
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"DP system processor",
+	"Low Voltage",
+	"HT supported",
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL, NULL
+};
+
+static char **proc_features[]={
+	proc_features_0,
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	NULL, NULL, NULL, NULL,
+	proc_features_16,
+	NULL, NULL, NULL, NULL,
+};
+
+static char *
+feature_set_info(char *page, u64 avail, u64 status, u64 control, u64 set)
+{
+	char *p = page;
+	char **vf, **v;
+	int i;
+
+	vf = v = proc_features[set];
+	for(i=0; i < 64; i++, avail >>=1, status >>=1, control >>=1) {
+
+		if (!(control))		/* No remaining bits set */
+			break;
+		if (!(avail & 0x1))	/* Print only bits that are available */
+			continue;
+		if (vf)
+			v = vf + i;
+		if ( v && *v ) {
+			p += sprintf(p, "%-40s : %s %s\n", *v,
+				avail & 0x1 ? (status & 0x1 ?
+						"On " : "Off"): "",
+				avail & 0x1 ? (control & 0x1 ?
+						"Ctrl" : "NoCtrl"): "");
+		} else {
+			p += sprintf(p, "Feature set %2ld bit %2d\t\t\t"
+					" : %s %s\n",
+				set, i,
+				avail & 0x1 ? (status & 0x1 ?
+						"On " : "Off"): "",
+				avail & 0x1 ? (control & 0x1 ?
+						"Ctrl" : "NoCtrl"): "");
+		}
+	}
+	return p;
+}
 
 static int
 processor_info(char *page)
 {
 	char *p = page;
-	const char **v = proc_features;
-	u64 avail=1, status=1, control=1;
-	int i;
+	u64 avail=1, status=1, control=1, feature_set=0;
 	s64 ret;
 
-	if ((ret=ia64_pal_proc_get_features(&avail, &status, &control)) != 0) return 0;
+	do {
+		ret = ia64_pal_proc_get_features(&avail, &status, &control,
+						feature_set);
+		if (ret < 0) {
+			return p - page;
+		}
+		if (ret == 1) {
+			feature_set++;
+			continue;
+		}
 
-	for(i=0; i < 64; i++, v++,avail >>=1, status >>=1, control >>=1) {
-		if ( ! *v ) continue;
-		p += sprintf(p, "%-40s : %s%s %s\n", *v,
-				avail & 0x1 ? "" : "NotImpl",
-				avail & 0x1 ? (status & 0x1 ? "On" : "Off"): "",
-				avail & 0x1 ? (control & 0x1 ? "Ctrl" : "NoCtrl"): "");
-	}
+		p = feature_set_info(p, avail, status, control, feature_set);
+
+		feature_set++;
+	} while(1);
+
 	return p - page;
 }
 
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index e796e29..2cb9425 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -129,9 +129,6 @@
 		first_time = 0;
 		if (need_workaround)
 			printk(KERN_INFO "Leaving McKinley Errata 9 workaround enabled\n");
-		else
-			printk(KERN_INFO "McKinley Errata 9 workaround not needed; "
-			       "disabling it\n");
 	}
 	if (need_workaround)
 		return;
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 59169bf7..73e7c2e 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -558,7 +558,7 @@
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perfmon",
-		.mode		= 0755,
+		.mode		= 0555,
 		.child		= pfm_ctl_table,
 	},
  	{}
@@ -567,7 +567,7 @@
 	{
 		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
-		.mode		= 0755,
+		.mode		= 0555,
 		.child		= pfm_sysctl_dir,
 	},
  	{}
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index d3c538b..7e9c275 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -146,6 +146,46 @@
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+static void *cpu_data;
+/**
+ * per_cpu_init - setup per-cpu variables
+ *
+ * Allocate and setup per-cpu data areas.
+ */
+void * __cpuinit
+per_cpu_init (void)
+{
+	int cpu;
+	static int first_time=1;
+
+	/*
+	 * get_free_pages() cannot be used before cpu_init() done.  BSP
+	 * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls
+	 * get_zeroed_page().
+	 */
+	if (first_time) {
+		first_time=0;
+		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
+			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
+			cpu_data += PERCPU_PAGE_SIZE;
+			per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+		}
+	}
+	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
+}
+
+static inline void
+alloc_per_cpu_data(void)
+{
+	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+				   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+}
+#else
+#define alloc_per_cpu_data() do { } while (0)
+#endif /* CONFIG_SMP */
+
 /**
  * find_memory - setup memory map
  *
@@ -182,41 +222,9 @@
 
 	find_initrd();
 
+	alloc_per_cpu_data();
 }
 
-#ifdef CONFIG_SMP
-/**
- * per_cpu_init - setup per-cpu variables
- *
- * Allocate and setup per-cpu data areas.
- */
-void * __cpuinit
-per_cpu_init (void)
-{
-	void *cpu_data;
-	int cpu;
-	static int first_time=1;
-
-	/*
-	 * get_free_pages() cannot be used before cpu_init() done.  BSP
-	 * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls
-	 * get_zeroed_page().
-	 */
-	if (first_time) {
-		first_time=0;
-		cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
-					   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
-			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
-			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
-			cpu_data += PERCPU_PAGE_SIZE;
-			per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
-		}
-	}
-	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
-}
-#endif /* CONFIG_SMP */
-
 static int
 count_pages (u64 start, u64 end, void *arg)
 {
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 0f9b126..53351c3 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 #include <linux/irq.h>
@@ -85,12 +85,18 @@
 {
 }
 
+extern void ia64_mca_register_cpev(int);
+
 static void sn_disable_irq(unsigned int irq)
 {
+	if (irq == local_vector_to_irq(IA64_CPE_VECTOR))
+		ia64_mca_register_cpev(0);
 }
 
 static void sn_enable_irq(unsigned int irq)
 {
+	if (irq == local_vector_to_irq(IA64_CPE_VECTOR))
+		ia64_mca_register_cpev(irq);
 }
 
 static void sn_ack_irq(unsigned int irq)
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index e336e16..81785b7 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2004-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2004-2007 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 
@@ -257,7 +257,9 @@
 
 	set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU));
 
+	/* set our heartbeating to other partitions into motion */
 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
+	xpc_hb_beater(0);
 
 	while (!(volatile int) xpc_exiting) {
 
@@ -1338,16 +1340,8 @@
 		dev_warn(xpc_part, "can't register die notifier\n");
 	}
 
-
-	/*
-	 * Set the beating to other partitions into motion.  This is
-	 * the last requirement for other partitions' discovery to
-	 * initiate communications with us.
-	 */
 	init_timer(&xpc_hb_timer);
 	xpc_hb_timer.function = xpc_hb_beater;
-	xpc_hb_beater(0);
-
 
 	/*
 	 * The real work-horse behind xpc.  This processes incoming
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2c7d6c24..2f2ce0c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -361,10 +361,10 @@
 	select PCSPEAKER
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select NR_CPUS_DEFAULT_1
 	select SYS_SUPPORTS_SMP
@@ -1409,7 +1409,6 @@
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	select NR_CPUS_DEFAULT_2
 	select SMP
@@ -1426,7 +1425,6 @@
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	select NR_CPUS_DEFAULT_8
 	select SMP
@@ -1453,7 +1451,6 @@
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	help
 	  Includes a loader for loading an elf relocatable object
@@ -1582,12 +1579,6 @@
 config CPU_MIPSR2_IRQ_EI
 	bool
 
-#
-# Shadow registers are an R2 feature
-#
-config CPU_MIPSR2_SRS
-	bool
-
 config CPU_HAS_SYNC
 	bool
 	depends on !CPU_R3000
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 23c1775..a1f8d8b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -44,7 +44,7 @@
 
 ifneq ($(SUBARCH),$(ARCH))
   ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux-  $(tool-archpref)-gnu-linux-  $(tool-archpref)-unknown-gnu-linux-)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux-  $(tool-archpref)-linux-gnu-  $(tool-archpref)-unknown-linux-gnu-)
   endif
 endif
 
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index 21e6d63..0a57f86 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -75,6 +75,7 @@
 	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
 	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
 
+	__raw_writeq(0, cfg);
 	__raw_writeq(delta - 1, init);
 	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
 
@@ -122,7 +123,7 @@
 				  CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
 	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
 	cd->rating		= 200;
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of_cpu(cpu);
@@ -143,7 +144,10 @@
 
 	action->handler	= sibyte_counter_handler;
 	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->mask	= cpumask_of_cpu(cpu);
 	action->name	= name;
 	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of_cpu(cpu));
 	setup_irq(irq, action);
 }
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
index e2029d0..63ac3ad 100644
--- a/arch/mips/kernel/cevt-sb1250.c
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -73,6 +73,7 @@
 	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
 	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
 
+	__raw_writeq(0, cfg);
 	__raw_writeq(delta - 1, init);
 	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
 
@@ -121,7 +122,7 @@
 				  CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
 	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
 	cd->rating		= 200;
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of_cpu(cpu);
@@ -142,7 +143,10 @@
 
 	action->handler	= sibyte_counter_handler;
 	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->mask	= cpumask_of_cpu(cpu);
 	action->name	= name;
 	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of_cpu(cpu));
 	setup_irq(irq, action);
 }
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c8c47a2..5c27943 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -943,6 +943,11 @@
 	}
 
 	__cpu_name[cpu] = cpu_to_name(c);
+
+	if (cpu_has_mips_r2)
+		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+	else
+		c->srsets = 1;
 }
 
 __init void cpu_report(void)
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index ebb16e6..92212bb 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -43,7 +43,7 @@
 }
 
 struct clocksource bcm1250_clocksource = {
-	.name	= "MIPS",
+	.name	= "bcm1250-counter-3",
 	.rating	= 200,
 	.read	= sb1250_hpt_read,
 	.mask	= CLOCKSOURCE_MASK(23),
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index c0f19d6..e76a76b 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -146,7 +146,7 @@
 	and	k0, ST0_IEP
 	bnez	k0, 1f
 
-	mfc0	k0, EP0_EPC
+	mfc0	k0, CP0_EPC
 	.set	noreorder
 	j	k0
 	rfe
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index 33506ff..5b10ac1 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -430,6 +430,7 @@
 			break;
 
 		default:
+			spin_unlock_irq(&current->sighand->siglock);
 			return -EINVAL;
 		}
 		recalc_sigpending();
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index 2507328..971adf6 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -44,5 +44,5 @@
 
 	for (i = base; i < base + 4; i++)
 		set_irq_chip_and_handler(i, &rm7k_irq_controller,
-					 handle_level_irq);
+					 handle_percpu_irq);
 }
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index ae83d2d..7b04583 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -104,5 +104,5 @@
 
 	rm9000_perfcount_irq = base + 1;
 	set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq,
-				 handle_level_irq);
+				 handle_percpu_irq);
 }
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 7b66e03..0ee2567 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -116,5 +116,5 @@
 
 	for (i = irq_base + 2; i < irq_base + 8; i++)
 		set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
-					 handle_level_irq);
+					 handle_percpu_irq);
 }
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index efd2d13..6e6e947c 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -60,6 +60,8 @@
 		      cpu_has_dsp ? " dsp" : "",
 		      cpu_has_mipsmt ? " mt" : ""
 		);
+	seq_printf(m, "shadow register sets\t: %d\n",
+		       cpu_data[n].srsets);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 	        cpu_has_vce ? "%u" : "not available");
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 118be24..01993ec 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -293,7 +293,7 @@
 	PTR	sys_ni_syscall			/* 6170, was get_kernel_syms */
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_quotactl
-	PTR	sys_nfsservctl
+	PTR	compat_sys_nfsservctl
 	PTR	sys_ni_syscall			/* res. for getpmsg */
 	PTR	sys_ni_syscall			/* 6175  for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index fa50078..23e73d0 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1100,59 +1100,6 @@
 	return (void *)old_handler;
 }
 
-#ifdef CONFIG_CPU_MIPSR2_SRS
-/*
- * MIPSR2 shadow register set allocation
- * FIXME: SMP...
- */
-
-static struct shadow_registers {
-	/*
-	 * Number of shadow register sets supported
-	 */
-	unsigned long sr_supported;
-	/*
-	 * Bitmap of allocated shadow registers
-	 */
-	unsigned long sr_allocated;
-} shadow_registers;
-
-static void mips_srs_init(void)
-{
-	shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
-	printk(KERN_INFO "%ld MIPSR2 register sets available\n",
-	       shadow_registers.sr_supported);
-	shadow_registers.sr_allocated = 1;	/* Set 0 used by kernel */
-}
-
-int mips_srs_max(void)
-{
-	return shadow_registers.sr_supported;
-}
-
-int mips_srs_alloc(void)
-{
-	struct shadow_registers *sr = &shadow_registers;
-	int set;
-
-again:
-	set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported);
-	if (set >= sr->sr_supported)
-		return -1;
-
-	if (test_and_set_bit(set, &sr->sr_allocated))
-		goto again;
-
-	return set;
-}
-
-void mips_srs_free(int set)
-{
-	struct shadow_registers *sr = &shadow_registers;
-
-	clear_bit(set, &sr->sr_allocated);
-}
-
 static asmlinkage void do_default_vi(void)
 {
 	show_regs(get_irq_regs());
@@ -1163,6 +1110,7 @@
 {
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
+	int srssets = current_cpu_data.srsets;
 	u32 *w;
 	unsigned char *b;
 
@@ -1178,7 +1126,7 @@
 
 	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
 
-	if (srs >= mips_srs_max())
+	if (srs >= srssets)
 		panic("Shadow register set %d not supported", srs);
 
 	if (cpu_has_veic) {
@@ -1186,7 +1134,7 @@
 			board_bind_eic_interrupt(n, srs);
 	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
-		if (mips_srs_max() > 1)
+		if (srssets > 1)
 			change_c0_srsmap(0xf << n*4, srs << n*4);
 	}
 
@@ -1253,14 +1201,6 @@
 	return set_vi_srs_handler(n, addr, 0);
 }
 
-#else
-
-static inline void mips_srs_init(void)
-{
-}
-
-#endif /* CONFIG_CPU_MIPSR2_SRS */
-
 /*
  * This is used by native signal handling
  */
@@ -1503,8 +1443,6 @@
 	else
 		ebase = CAC_BASE;
 
-	mips_srs_init();
-
 	per_cpu_trap_init();
 
 	/*
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 436a64f..38bd33f 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1003,6 +1003,7 @@
 	write_tc_c0_tcstatus(tmp);
 
 	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
 
 	/* bind it to anything other than VPE1 */
 //	write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
@@ -1235,9 +1236,12 @@
 	settc(t->index);
 	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
 
-	/* mark the TC unallocated and halt'ed */
-	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+	/* halt the TC */
 	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
+
+	/* mark the TC unallocated */
+	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
 
 	v->state = VPE_STATE_UNUSED;
 
@@ -1533,14 +1537,16 @@
 				t->pvpe = get_vpe(0);	/* set the parent vpe */
 			}
 
+			/* halt the TC */
+			write_tc_c0_tchalt(TCHALT_H);
+			mips_ihb();
+
 			tmp = read_tc_c0_tcstatus();
 
 			/* mark not activated and not dynamically allocatable */
 			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
 			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
 			write_tc_c0_tcstatus(tmp);
-
-			write_tc_c0_tchalt(TCHALT_H);
 		}
 	}
 
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index ba9692b..cfeab66 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -19,17 +19,14 @@
  * Lasat boards.
  */
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
 #include <asm/lasat/lasatint.h>
-#include <asm/time.h>
-#include <asm/gdb-stub.h>
+
+#include <irq.h>
 
 static volatile int *lasat_int_status;
 static volatile int *lasat_int_mask;
@@ -97,12 +94,18 @@
 
 	/* if int_status == 0, then the interrupt has already been cleared */
 	if (int_status) {
-		irq = LASATINT_BASE + ls1bit32(int_status);
+		irq = LASAT_IRQ_BASE + ls1bit32(int_status);
 
 		do_IRQ(irq);
 	}
 }
 
+static struct irqaction cascade = {
+	.handler	= no_action,
+	.mask		= CPU_MASK_NONE,
+	.name		= "cascade",
+};
+
 void __init arch_init_irq(void)
 {
 	int i;
@@ -127,6 +130,9 @@
 	}
 
 	mips_cpu_irq_init();
-	for (i = LASATINT_BASE; i <= LASATINT_END; i++)
+
+	for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
 		set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
+
+	setup_irq(LASAT_CASCADE_IRQ, &cascade);
 }
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6806d58..9355f1c 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/kernel.h>
@@ -507,7 +508,11 @@
 
 static void r4k_flush_data_cache_page(unsigned long addr)
 {
-	r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+	if (in_atomic())
+		local_r4k_flush_data_cache_page((void *)addr);
+	else
+		r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr,
+			        1, 1);
 }
 
 struct flush_icache_range_args {
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index e7f539e3..1bd1f18 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -154,7 +154,7 @@
 	if (status & ~(1UL << 31)) {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 #ifdef DUMP_L2_ECC_TAG_ON_ERROR
-		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+		l2_tag = in64(IOADDR(A_L2_ECC_TAG));
 #endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 		printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
@@ -183,9 +183,9 @@
 #ifdef CONFIG_SIBYTE_BW_TRACE
 	/* Freeze the trace buffer now */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #else
-	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #endif
 	printk("Trace buffer frozen\n");
 #endif
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 110ee76..ec3b9e9 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -426,7 +426,7 @@
 
 #ifdef CONFIG_HIGHMEM
 	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
-		struct page *page = mem_map + tmp;
+		struct page *page = pfn_to_page(tmp);
 
 		if (!page_is_ram(tmp)) {
 			SetPageReserved(page);
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index a45bedd..5c8a79b 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -113,6 +113,16 @@
 	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 5 */
 };
 
+static char irq_tab_pcit_cplus[13][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,     0,     0,     0,     0 },	/* HOST bridge */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* PCI Slot 9 */
+	{     0,     0,     0,     0,     0 },	/* PCI-EISA */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* fixup */
+};
+
 static inline int is_rm300_revd(void)
 {
 	unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
@@ -123,8 +133,19 @@
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (sni_brd_type) {
-	case SNI_BRD_PCI_TOWER:
 	case SNI_BRD_PCI_TOWER_CPLUS:
+		if (slot == 4) {
+			/*
+			 * SNI messed up interrupt wiring for onboard
+			 * PCI bus 1; we need to fix this up here
+			 */
+			while (dev && dev->bus->number != 1)
+				dev = dev->bus->self;
+			if (dev && dev->devfn >= PCI_DEVFN(4, 0))
+				slot = 5;
+		}
+		return irq_tab_pcit_cplus[slot][pin];
+	case SNI_BRD_PCI_TOWER:
 	        return irq_tab_pcit[slot][pin];
 
 	case SNI_BRD_PCI_MTOWER:
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index 174f314..e70ae32 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -5,12 +5,14 @@
  *
  * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/types.h>
+
 #include <asm/bootinfo.h>
-#include <asm/lasat/lasatint.h>
+
+#include <irq.h>
 
 extern struct pci_ops nile4_pci_ops;
 extern struct pci_ops gt64xxx_pci0_ops;
@@ -55,15 +57,15 @@
 
 arch_initcall(lasat_pci_setup);
 
-#define LASATINT_ETH1   (LASATINT_BASE + 0)
-#define LASATINT_ETH0   (LASATINT_BASE + 1)
-#define LASATINT_HDC    (LASATINT_BASE + 2)
-#define LASATINT_COMP   (LASATINT_BASE + 3)
-#define LASATINT_HDLC   (LASATINT_BASE + 4)
-#define LASATINT_PCIA   (LASATINT_BASE + 5)
-#define LASATINT_PCIB   (LASATINT_BASE + 6)
-#define LASATINT_PCIC   (LASATINT_BASE + 7)
-#define LASATINT_PCID   (LASATINT_BASE + 8)
+#define LASAT_IRQ_ETH1   (LASAT_IRQ_BASE + 0)
+#define LASAT_IRQ_ETH0   (LASAT_IRQ_BASE + 1)
+#define LASAT_IRQ_HDC    (LASAT_IRQ_BASE + 2)
+#define LASAT_IRQ_COMP   (LASAT_IRQ_BASE + 3)
+#define LASAT_IRQ_HDLC   (LASAT_IRQ_BASE + 4)
+#define LASAT_IRQ_PCIA   (LASAT_IRQ_BASE + 5)
+#define LASAT_IRQ_PCIB   (LASAT_IRQ_BASE + 6)
+#define LASAT_IRQ_PCIC   (LASAT_IRQ_BASE + 7)
+#define LASAT_IRQ_PCID   (LASAT_IRQ_BASE + 8)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -71,13 +73,13 @@
 	case 1:
 	case 2:
 	case 3:
-		return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+		return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
 	case 4:
-		return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
+		return LASAT_IRQ_ETH1;   /* Ethernet 1 (LAN 2) */
 	case 5:
-		return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
+		return LASAT_IRQ_ETH0;   /* Ethernet 0 (LAN 1) */
 	case 6:
-		return LASATINT_HDC;    /* IDE controller */
+		return LASAT_IRQ_HDC;    /* IDE controller */
 	default:
 		return 0xff;            /* Illegal */
 	}
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index 240df9e..33c4f68 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -154,6 +154,7 @@
 		pciu_write(PCICLKSELREG, QUARTER_VTCLOCK);
 	else {
 		printk(KERN_ERR "PCI Clock is over 33MHz.\n");
+		iounmap(pciu_base);
 		return -EINVAL;
 	}
 
diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile
index cec24c1..2ba4ef3 100644
--- a/arch/mips/qemu/Makefile
+++ b/arch/mips/qemu/Makefile
@@ -4,6 +4,7 @@
 
 obj-y		= q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o
 
-obj-$(CONFIG_SMP) += q-smp.o
+obj-$(CONFIG_EARLY_PRINTK)	+= q-console.o
+obj-$(CONFIG_SMP)		+= q-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/qemu/q-console.c b/arch/mips/qemu/q-console.c
new file mode 100644
index 0000000..81101ae
--- /dev/null
+++ b/arch/mips/qemu/q-console.c
@@ -0,0 +1,26 @@
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+
+#define PORT(offset) (0x3f8 + (offset))
+
+static inline unsigned int serial_in(int offset)
+{
+	return inb(PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	outb(value, PORT(offset));
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(UART_TX, c);
+
+	return 1;
+}
diff --git a/arch/mips/qemu/q-firmware.c b/arch/mips/qemu/q-firmware.c
index c2239b4..3ed43f4 100644
--- a/arch/mips/qemu/q-firmware.c
+++ b/arch/mips/qemu/q-firmware.c
@@ -2,6 +2,9 @@
 #include <linux/string.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
+#include <asm/io.h>
+
+#define QEMU_PORT_BASE 0xb4000000
 
 void __init prom_init(void)
 {
@@ -15,4 +18,7 @@
 	} else {
 		add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
 	}
+
+
+	set_io_port_base(QEMU_PORT_BASE);
 }
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 23d34c1..969cedc 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -6,8 +6,6 @@
 
 extern void qemu_reboot_setup(void);
 
-#define QEMU_PORT_BASE 0xb4000000
-
 const char *get_system_type(void)
 {
 	return "Qemu";
@@ -20,6 +18,5 @@
 
 void __init plat_mem_setup(void)
 {
-	set_io_port_base(QEMU_PORT_BASE);
 	qemu_reboot_setup();
 }
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index e28d626..db372a0 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -370,11 +370,11 @@
 #endif
 		/* Setup uart 1 settings, mapper */
 		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		__raw_writeq(IMR_IP6_VAL,
-			     IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq<<3));
+			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+			     (kgdb_irq << 3)));
 		bcm1480_unmask_irq(0, kgdb_irq);
 
 #ifdef CONFIG_GDB_CONSOLE
@@ -412,18 +412,6 @@
 
 extern void bcm1480_mailbox_interrupt(void);
 
-static inline void dispatch_ip4(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-	            IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	do_IRQ(irq);
-}
-
 static inline void dispatch_ip2(void)
 {
 	unsigned long long mask_h, mask_l;
@@ -451,6 +439,7 @@
 
 asmlinkage void plat_irq_dispatch(void)
 {
+	unsigned int cpu = smp_processor_id();
 	unsigned int pending;
 
 #ifdef CONFIG_SIBYTE_BCM1480_PROF
@@ -467,7 +456,7 @@
 #endif
 
 	if (pending & CAUSEF_IP4)
-		dispatch_ip4();
+		do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
 		bcm1480_mailbox_interrupt();
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 4df070f..834650f 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -244,7 +244,7 @@
 	if (pend & IT_EISA) {
 		int irq;
 		/*
-		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
+		 * Note: ASIC PCI's builtin interrupt acknowledge feature is
 		 * broken.  Using it may result in loss of some or all i8259
 		 * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
 		 */
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 1899601..3f23d9f 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -525,6 +525,7 @@
 		intassign1 |= (uint16_t)assign << 9;
 		break;
 	default:
+		spin_unlock_irq(&desc->lock);
 		return -EINVAL;
 	}
 
@@ -592,6 +593,7 @@
 		intassign3 |= (uint16_t)assign << 12;
 		break;
 	default:
+		spin_unlock_irq(&desc->lock);
 		return -EINVAL;
 	}
 
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 4e16534..bd87626 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -107,6 +107,9 @@
 # No AltiVec instruction when building kernel
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
 
+# No SPE instruction when building kernel
+KBUILD_CFLAGS += $(call cc-option,-mno-spe)
+
 # Enable unit-at-a-time mode when possible. It shrinks the
 # kernel considerably.
 KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index fa681f5..754fa39 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -122,7 +122,9 @@
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
-				interrupts = <9 4 f 4>;
+				interrupts = <
+					f 4 /* Ethernet */
+					9 4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
 				reg = <ef600800 70>;
 				mal-device = <&MAL>;
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 39b27e5..31147a0 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -21,6 +21,14 @@
 #		(default ./arch/powerpc/boot)
 # -W dir	specify working directory for temporary files (default .)
 
+# Stop execution if any command fails
+set -e
+
+# Allow for verbose output
+if [ "$V" = 1 ]; then
+    set -x
+fi
+
 # defaults
 kernel=
 ofile=zImage
@@ -111,7 +119,7 @@
     if [ -z "$dtb" ]; then
 	dtb="$platform.dtb"
     fi
-    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
@@ -149,7 +157,6 @@
 ps3)
     platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
     lds=$object/zImage.ps3.lds
-    binary=y
     gzip=
     ext=bin
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
@@ -233,7 +240,7 @@
 
 if [ -n "$binary" ]; then
     mv "$ofile" "$ofile".elf
-    ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+    ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
 fi
 
 # post-processing needed for some platforms
@@ -246,9 +253,9 @@
     $object/hack-coff "$ofile"
     ;;
 cuboot*)
-    gzip -f -9 "$ofile".bin
+    gzip -f -9 "$ofile"
     mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
-            $uboot_version -d "$ofile".bin.gz "$ofile"
+            $uboot_version -d "$ofile".gz "$ofile"
     ;;
 treeboot*)
     mv "$ofile" "$ofile.elf"
@@ -269,11 +276,11 @@
     # then copied to offset 0x100.  At runtime the bootwrapper program
     # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
 
-    system_reset_overlay=0x`${CROSS}nm "$ofile".elf \
+    system_reset_overlay=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_overlay$'       \
         | cut -d' ' -f1`
     system_reset_overlay=`printf "%d" $system_reset_overlay`
-    system_reset_kernel=0x`${CROSS}nm "$ofile".elf \
+    system_reset_kernel=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_kernel$'       \
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
@@ -282,23 +289,15 @@
 
     rm -f "$object/otheros.bld"
 
-    msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
-        skip=$overlay_dest seek=$system_reset_kernel      \
-        count=$overlay_size bs=1 2>&1)
+    ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
-    if [ $? -ne "0" ]; then
-       echo $msg
-       exit 1
-    fi
+    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$overlay_dest seek=$system_reset_kernel  \
+        count=$overlay_size bs=1
 
-    msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
-        skip=$system_reset_overlay seek=$overlay_dest     \
-        count=$overlay_size bs=1 2>&1)
-
-    if [ $? -ne "0" ]; then
-       echo $msg
-       exit 2
-    fi
+    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$system_reset_overlay seek=$overlay_dest \
+        count=$overlay_size bs=1
 
     gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
     ;;
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 1ccf3ed..78c968a 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:40:47 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov  6 23:23:50 2007
 #
 CONFIG_PPC64=y
 
@@ -10,6 +10,7 @@
 #
 CONFIG_POWER4_ONLY=y
 CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -18,8 +19,13 @@
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -65,7 +71,10 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,7 +95,6 @@
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -107,14 +115,15 @@
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -125,7 +134,6 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
@@ -141,6 +149,7 @@
 # PA Semi PWRficient options
 #
 CONFIG_PPC_PASEMI_IOMMU=y
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
 CONFIG_ELECTRA_IDE=y
 # CONFIG_PPC_CELLEB is not set
@@ -156,29 +165,52 @@
 # CONFIG_U3_DART is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
+CONFIG_MPIC_BROKEN_REGREAD=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+CONFIG_PPC_PASEMI_CPUFREQ=y
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
 # Kernel options
 #
-CONFIG_HZ_100=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_IOMMU_VMERGE=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_KEXEC is not set
@@ -196,12 +228,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
+CONFIG_PPC_HAS_HASH_64K=y
+CONFIG_PPC_64K_PAGES=y
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -222,11 +255,8 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -240,6 +270,7 @@
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
+# CONFIG_ELECTRA_CF is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_KERNEL_START=0xc000000000000000
 
@@ -255,7 +286,7 @@
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
@@ -281,6 +312,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -306,10 +338,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -338,6 +366,7 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -361,6 +390,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -385,6 +415,7 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -402,7 +433,15 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -455,10 +494,42 @@
 # IDE chipset support/bugfixes
 #
 # CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
 # CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -498,10 +569,11 @@
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_3W_9XXX=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -574,9 +646,10 @@
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
+CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -589,41 +662,13 @@
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 # CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-CONFIG_IEEE1394_PCILYNX=y
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-# CONFIG_IEEE1394_VIDEO1394 is not set
-CONFIG_IEEE1394_SBP2=y
-# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
@@ -633,6 +678,8 @@
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -649,6 +696,7 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -657,13 +705,16 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -682,6 +733,7 @@
 CONFIG_E1000=y
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -689,6 +741,7 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -697,12 +750,15 @@
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 # CONFIG_TR is not set
 
 #
@@ -749,7 +805,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -810,15 +865,12 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=4
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -896,8 +948,6 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -905,12 +955,12 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -946,6 +996,13 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -963,14 +1020,14 @@
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+CONFIG_DRM_RADEON=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 CONFIG_VGASTATE=y
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
@@ -979,6 +1036,7 @@
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1026,6 +1084,15 @@
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -1178,6 +1245,7 @@
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -1328,6 +1396,7 @@
 # I2C RTC drivers
 #
 CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1357,19 +1426,6 @@
 #
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
 # Userspace I/O
 #
 # CONFIG_UIO is not set
@@ -1388,7 +1444,6 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1436,7 +1491,6 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -1449,30 +1503,43 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -1501,10 +1568,6 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1545,10 +1608,6 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 # CONFIG_UCC_SLOW is not set
 
@@ -1561,23 +1620,24 @@
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 # CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1586,7 +1646,7 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1601,9 +1661,12 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 # CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1620,6 +1683,7 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
@@ -1628,34 +1692,38 @@
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
 CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
+CONFIG_CRYPTO_BLOWFISH=y
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 05582af..3e90c83 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:47:09 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov  6 23:43:56 2007
 #
 CONFIG_PPC64=y
 
@@ -11,6 +11,7 @@
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
 CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -19,8 +20,13 @@
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -72,8 +78,15 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_CPUACCT is not set
 CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -93,7 +106,6 @@
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -114,6 +126,7 @@
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -132,7 +145,6 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
@@ -155,7 +167,15 @@
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_PASEMI is not set
+CONFIG_PPC_PASEMI=y
+
+#
+# PA Semi PWRficient options
+#
+CONFIG_PPC_PASEMI_IOMMU=y
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
+CONFIG_PPC_PASEMI_MDIO=y
+CONFIG_ELECTRA_IDE=y
 CONFIG_PPC_CELLEB=y
 # CONFIG_PPC_PS3 is not set
 CONFIG_PPC_CELL=y
@@ -188,6 +208,7 @@
 CONFIG_PPC_PMI=m
 CONFIG_MMIO_NVRAM=y
 CONFIG_MPIC_U3_HT_IRQS=y
+CONFIG_MPIC_BROKEN_REGREAD=y
 CONFIG_IBMVIO=y
 # CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
@@ -201,6 +222,8 @@
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -211,6 +234,7 @@
 # CPU Frequency drivers
 #
 CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_PPC_PASEMI_CPUFREQ=y
 # CONFIG_CPM2 is not set
 CONFIG_AXON_RAM=m
 # CONFIG_FSL_ULI1575 is not set
@@ -254,6 +278,8 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
@@ -268,6 +294,7 @@
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SUSPEND_SMP_POSSIBLE=y
+CONFIG_HIBERNATION_SMP_POSSIBLE=y
 CONFIG_SECCOMP=y
 # CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
@@ -284,12 +311,22 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# PC-card bridges
 #
-# CONFIG_PCCARD is not set
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_ELECTRA_CF=y
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -319,7 +356,10 @@
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -333,6 +373,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -404,6 +445,7 @@
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
@@ -465,10 +507,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -498,6 +536,7 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -539,6 +578,8 @@
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -550,6 +591,11 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
@@ -557,8 +603,6 @@
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_AMD74XX=y
@@ -590,7 +634,7 @@
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -631,6 +675,7 @@
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -671,19 +716,20 @@
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SVW=y
 # CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_MV=y
 # CONFIG_SATA_NV is not set
 # CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -713,8 +759,10 @@
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -725,6 +773,7 @@
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 CONFIG_PATA_WINBOND=y
+CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_SCC=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -745,15 +794,10 @@
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -800,13 +844,15 @@
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_PHY=y
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
@@ -818,6 +864,9 @@
 CONFIG_FIXED_PHY=m
 CONFIG_FIXED_MII_10_FDX=y
 CONFIG_FIXED_MII_100_FDX=y
+# CONFIG_FIXED_MII_1000_FDX is not set
+CONFIG_FIXED_MII_AMNT=1
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -829,6 +878,11 @@
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBMVETH=m
+# CONFIG_IBM_NEW_EMAC is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
 # CONFIG_PCNET32_NAPI is not set
@@ -836,7 +890,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
@@ -856,6 +909,7 @@
 CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -863,6 +917,7 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -872,13 +927,16 @@
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-CONFIG_PASEMI_MAC=m
+# CONFIG_NIU is not set
+CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -899,6 +957,7 @@
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 CONFIG_ISERIES_VETH=m
 # CONFIG_FDDI is not set
@@ -918,6 +977,7 @@
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
@@ -939,7 +999,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -1002,6 +1061,7 @@
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1029,14 +1089,18 @@
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
@@ -1068,6 +1132,7 @@
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -1106,6 +1171,13 @@
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -1122,18 +1194,8 @@
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -1142,6 +1204,7 @@
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1192,6 +1255,19 @@
 # CONFIG_FB_PM3 is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
 
 #
 # Console display driver support
@@ -1333,6 +1409,12 @@
 # CONFIG_SND_USB_CAIAQ is not set
 
 #
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
 # System on Chip audio support
 #
 # CONFIG_SND_SOC is not set
@@ -1348,6 +1430,7 @@
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -1489,19 +1572,53 @@
 #
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_EDAC_PASEMI=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
 #
 
 #
@@ -1585,7 +1702,6 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1604,10 +1720,7 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
@@ -1619,6 +1732,7 @@
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1626,6 +1740,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
 # CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
@@ -1662,10 +1777,6 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1706,10 +1817,6 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 # CONFIG_UCC_SLOW is not set
 
@@ -1733,18 +1840,17 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 # CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1768,9 +1874,12 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1780,6 +1889,7 @@
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1788,6 +1898,7 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
@@ -1812,6 +1923,7 @@
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1826,9 +1938,12 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 3ef51fb..9c74fdf 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -186,7 +186,9 @@
 		pitch = *prop;
 	if (pitch == 1)
 		pitch = 0x1000;
-	prop = of_get_property(np, "address", NULL);
+	prop = of_get_property(np, "linux,bootx-addr", NULL);
+	if (prop == NULL)
+		prop = of_get_property(np, "address", NULL);
 	if (prop)
 		address = *prop;
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index d3fb7d0..9ed351f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1104,6 +1104,16 @@
 	{
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000850,
+		.cpu_name		= "440GR Rev. A",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.platform		= "ppc440",
+	},
+	{ /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x40000858,
 		.cpu_name		= "440EP Rev. A",
 		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
@@ -1115,6 +1125,16 @@
 	{
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x400008d3,
+		.cpu_name		= "440GR Rev. B",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.platform		= "ppc440",
+	},
+	{ /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x400008db,
 		.cpu_name		= "440EP Rev. B",
 		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
@@ -1123,20 +1143,9 @@
 		.cpu_setup		= __setup_cpu_440ep,
 		.platform		= "ppc440",
 	},
-	{ /* 440EPX */
-		.pvr_mask		= 0xf0000ffb,
-		.pvr_value		= 0x200008D0,
-		.cpu_name		= "440EPX",
-		.cpu_features		= CPU_FTRS_44X,
-		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
-		.icache_bsize		= 32,
-		.dcache_bsize		= 32,
-		.cpu_setup		= __setup_cpu_440epx,
-		.platform		= "ppc440",
-	},
 	{ /* 440GRX */
 		.pvr_mask		= 0xf0000ffb,
-		.pvr_value		= 0x200008D8,
+		.pvr_value		= 0x200008D0,
 		.cpu_name		= "440GRX",
 		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= COMMON_USER_BOOKE,
@@ -1145,6 +1154,17 @@
 		.cpu_setup		= __setup_cpu_440grx,
 		.platform		= "ppc440",
 	},
+	{ /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */
+		.pvr_mask		= 0xf0000ffb,
+		.pvr_value		= 0x200008D8,
+		.cpu_name		= "440EPX",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_440epx,
+		.platform		= "ppc440",
+	},
 	{	/* 440GP Rev. B */
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000440,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 21d889e..69a91bd 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -244,6 +244,16 @@
 	andis.	r10,r0,DBCR0_IC@h
 	bnel-	load_dbcr0
 #endif
+#ifdef CONFIG_44x
+	lis	r4,icache_44x_need_flush@ha
+	lwz	r5,icache_44x_need_flush@l(r4)
+	cmplwi	cr0,r5,0
+	bne-	2f
+1:
+#endif /* CONFIG_44x */
+BEGIN_FTR_SECTION
+	lwarx	r7,0,r1
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 	lwz	r4,_LINK(r1)
 	lwz	r5,_CCR(r1)
@@ -258,6 +268,12 @@
 	mtspr	SPRN_SRR1,r8
 	SYNC
 	RFI
+#ifdef CONFIG_44x
+2:	li	r7,0
+	iccci	r0,r0
+	stw	r7,icache_44x_need_flush@l(r4)
+	b	1b
+#endif  /* CONFIG_44x */
 
 66:	li	r3,-ENOSYS
 	b	ret_from_syscall
@@ -683,6 +699,16 @@
 
 	/* interrupts are hard-disabled at this point */
 restore:
+#ifdef CONFIG_44x
+	lis	r4,icache_44x_need_flush@ha
+	lwz	r5,icache_44x_need_flush@l(r4)
+	cmplwi	cr0,r5,0
+	beq+	1f
+	li	r6,0
+	iccci	r0,r0
+	stw	r6,icache_44x_need_flush@l(r4)
+1:
+#endif  /* CONFIG_44x */
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -694,6 +720,9 @@
 	mtctr	r11
 
 	PPC405_ERR77(0,r1)
+BEGIN_FTR_SECTION
+	lwarx	r11,0,r1
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 97c5857..c349868 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -904,7 +904,7 @@
  */
 12:	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
+	ld	r4,_DAR(r1)
 	bl	.low_hash_fault
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index abd2957..c3cf0e8 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -122,7 +122,7 @@
 	{
 		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
-		.mode		= 0755,
+		.mode		= 0555,
 		.child		= powersave_nap_ctl_table,
 	},
 	{}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8533de5..8b642ab 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -288,7 +288,16 @@
  */
 _GLOBAL(_tlbie)
 #if defined(CONFIG_40x)
+	/* We run the search with interrupts disabled because we have to change
+	 * the PID and I don't want to preempt when that happens.
+	 */
+	mfmsr	r5
+	mfspr	r6,SPRN_PID
+	wrteei	0
+	mtspr	SPRN_PID,r4
 	tlbsx.	r3, 0, r3
+	mtspr	SPRN_PID,r6
+	wrtee	r5
 	bne	10f
 	sync
 	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -297,23 +306,23 @@
 	tlbwe	r3, r3, TLB_TAG
 	isync
 10:
+
 #elif defined(CONFIG_44x)
-	mfspr	r4,SPRN_MMUCR
-	mfspr	r5,SPRN_PID			/* Get PID */
-	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mfspr	r5,SPRN_MMUCR
+	rlwimi	r5,r4,0,24,31			/* Set TID */
 
 	/* We have to run the search with interrupts disabled, even critical
 	 * and debug interrupts (in fact the only critical exceptions we have
 	 * are debug and machine check).  Otherwise  an interrupt which causes
 	 * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
-	mfmsr	r5
+	mfmsr	r4
 	lis	r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
 	addi	r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
-	andc	r6,r5,r6
+	andc	r6,r4,r6
 	mtmsr	r6
-	mtspr	SPRN_MMUCR,r4
+	mtspr	SPRN_MMUCR,r5
 	tlbsx.	r3, 0, r3
-	mtmsr	r5
+	mtmsr	r4
 	bne	10f
 	sync
 	/* There are only 64 TLB entries, so r3 < 64,
@@ -534,12 +543,21 @@
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
+#ifndef CONFIG_44x
+	/* We don't flush the icache on 44x. Those have a virtual icache
+	 * and we don't have access to the virtual address here (it's
+	 * not the page vaddr but where it's mapped in user space). The
+	 * flushing of the icache on these is handled elsewhere, when
+	 * a change in the address space occurs, before returning to
+	 * user space
+	 */
 	mtctr	r4
 1:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	isync
+#endif /* CONFIG_44x */
 	blr
 
 /*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index b9d8837..41e13f4 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -350,7 +350,7 @@
 	local_irq_save(flags);
 
 	account_system_vtime(current);
-	account_process_vtime(current);
+	account_process_tick(current, 0);
 	calculate_steal_time();
 
 	last = _switch(old_thread, new_thread);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9f329a8..acc0d24 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -697,6 +697,18 @@
 		prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
 		if (prop && (*prop & 0xff000000) == 0x0f000000)
 			identify_cpu(0, *prop);
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+		/*
+		 * Since 440GR(x)/440EP(x) processors have the same pvr,
+		 * we check the node path and set bit 28 in the cur_cpu_spec
+		 * pvr for EP(x) processor version. This bit is always 0 in
+		 * the "real" pvr. Then we call identify_cpu again with
+		 * the new logical pvr to enable FPU support.
+		 */
+		if (strstr(uname, "440EP")) {
+			identify_cpu(0, cur_cpu_spec->pvr_value | 0x8);
+		}
+#endif
 	}
 
 	check_cpu_feature_properties(node);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1db10f7..1add6ef 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1244,7 +1244,7 @@
 			local_alloc_bottom = base;
 
 		/* It seems OF doesn't null-terminate the path :-( */
-		memset(path, 0, sizeof(path));
+		memset(path, 0, PROM_SCRATCH_SIZE);
 		/* Call OF to setup the TCE hardware */
 		if (call_prom("package-to-path", 3, 1, node,
 			      path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) {
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ede77db..3b1529c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -291,23 +291,16 @@
 		if ( num_cpus == 1 ) {
 			const u32 *sizep, *lsizep;
 			u32 size, lsize;
-			const char *dc, *ic;
-
-			/* Then read cache informations */
-			if (machine_is(powermac)) {
-				dc = "d-cache-block-size";
-				ic = "i-cache-block-size";
-			} else {
-				dc = "d-cache-line-size";
-				ic = "i-cache-line-size";
-			}
 
 			size = 0;
 			lsize = cur_cpu_spec->dcache_bsize;
 			sizep = of_get_property(np, "d-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, dc, NULL);
+			lsizep = of_get_property(np, "d-cache-block-size", NULL);
+			/* fallback if block size missing */
+			if (lsizep == NULL)
+				lsizep = of_get_property(np, "d-cache-line-size", NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
@@ -324,7 +317,9 @@
 			sizep = of_get_property(np, "i-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, ic, NULL);
+			lsizep = of_get_property(np, "i-cache-block-size", NULL);
+			if (lsizep == NULL)
+				lsizep = of_get_property(np, "i-cache-line-size", NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index 69e8f86..77fc766 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -133,10 +133,12 @@
 /* Resume code */
 _GLOBAL(swsusp_arch_resume)
 
+#ifdef CONFIG_ALTIVEC
 	/* Stop pending alitvec streams and memory accesses */
 BEGIN_FTR_SECTION
 	DSSALL
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
  	sync
 
 	/* Disable MSR:DR to make sure we don't take a TLB or
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9eb3284..c0d7772 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -259,7 +259,7 @@
  * user and system time records.
  * Must be called with interrupts disabled.
  */
-void account_process_vtime(struct task_struct *tsk)
+void account_process_tick(struct task_struct *tsk, int user_tick)
 {
 	cputime_t utime, utimescaled;
 
@@ -274,18 +274,6 @@
 	account_user_time_scaled(tsk, utimescaled);
 }
 
-static void account_process_time(struct pt_regs *regs)
-{
-	int cpu = smp_processor_id();
-
-	account_process_vtime(current);
-	run_local_timers();
-	if (rcu_pending(cpu))
-		rcu_check_callbacks(cpu, user_mode(regs));
-	scheduler_tick();
- 	run_posix_cpu_timers(current);
-}
-
 /*
  * Stuff for accounting stolen time.
  */
@@ -375,7 +363,6 @@
 
 #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
 #define calc_cputime_factors()
-#define account_process_time(regs)	update_process_times(user_mode(regs))
 #define calculate_steal_time()		do { } while (0)
 #endif
 
@@ -586,7 +573,7 @@
 		/* not time for this event yet */
 		now = per_cpu(decrementer_next_tb, cpu) - now;
 		if (now <= DECREMENTER_MAX)
-			set_dec((unsigned int)now - 1);
+			set_dec((int)now);
 		return;
 	}
 	old_regs = set_irq_regs(regs);
@@ -599,20 +586,8 @@
 		get_lppaca()->int_dword.fields.decr_int = 0;
 #endif
 
-	/*
-	 * We cannot disable the decrementer, so in the period
-	 * between this cpu's being marked offline in cpu_online_map
-	 * and calling stop-self, it is taking timer interrupts.
-	 * Avoid calling into the scheduler rebalancing code if this
-	 * is the case.
-	 */
-	if (!cpu_is_offline(cpu))
-		account_process_time(regs);
-
 	if (evt->event_handler)
 		evt->event_handler(evt);
-	else
-		evt->set_next_event(DECREMENTER_MAX, evt);
 
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
@@ -836,9 +811,6 @@
 				      struct clock_event_device *dev)
 {
 	__get_cpu_var(decrementer_next_tb) = get_tb_or_rtc() + evt;
-	/* The decrementer interrupts on the 0 -> -1 transition */
-	if (evt)
-		--evt;
 	set_dec(evt);
 	return 0;
 }
@@ -857,7 +829,7 @@
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of_cpu(cpu);
 
-	printk(KERN_INFO "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n",
+	printk(KERN_DEBUG "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n",
 	       dec->name, dec->mult, dec->shift, cpu);
 
 	clockevents_register_device(dec);
@@ -871,7 +843,8 @@
 					     decrementer_clockevent.shift);
 	decrementer_clockevent.max_delta_ns =
 		clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
-	decrementer_clockevent.min_delta_ns = 1000;
+	decrementer_clockevent.min_delta_ns =
+		clockevent_delta2ns(2, &decrementer_clockevent);
 
 	register_decrementer_clockevent(cpu);
 }
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 823a8cb..f66fa5d 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -37,11 +37,10 @@
 		ALIGN_FUNCTION();
 		*(.text.head)
 		_text = .;
-		TEXT_TEXT
+		*(.text .fixup .text.init.refok .exit.text.refok)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-		*(.fixup)
 
 #ifdef CONFIG_PPC32
 		*(.got1)
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index e067df8..3899ea9 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -98,13 +98,12 @@
 
 	v = KERNELBASE;
 	p = PPC_MEMSTART;
-	s = 0;
+	s = total_lowmem;
 
-	if (__map_without_ltlbs) {
-		return s;
-	}
+	if (__map_without_ltlbs)
+		return 0;
 
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+	while (s >= LARGE_PAGE_SIZE_16M) {
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
@@ -116,10 +115,10 @@
 
 		v += LARGE_PAGE_SIZE_16M;
 		p += LARGE_PAGE_SIZE_16M;
-		s += LARGE_PAGE_SIZE_16M;
+		s -= LARGE_PAGE_SIZE_16M;
 	}
 
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+	while (s >= LARGE_PAGE_SIZE_4M) {
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
@@ -128,8 +127,8 @@
 
 		v += LARGE_PAGE_SIZE_4M;
 		p += LARGE_PAGE_SIZE_4M;
-		s += LARGE_PAGE_SIZE_4M;
+		s -= LARGE_PAGE_SIZE_4M;
 	}
 
-	return s;
+	return total_lowmem - s;
 }
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index c3df504..04dc087 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -35,6 +35,7 @@
  */
 unsigned int tlb_44x_index; /* = 0 */
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
+int icache_44x_need_flush;
 
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a18fda3..8135da0 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -309,7 +309,7 @@
 					set_bit(PG_arch_1, &page->flags);
 				}
 				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address);
+				_tlbie(address, mm->context.id);
 				pte_unmap_unlock(ptep, ptl);
 				up_read(&mm->mmap_sem);
 				return 0;
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index ad253b9..e935edd 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -331,7 +331,7 @@
  *****************************************************************************/
 
 /* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
- *		 pte_t *ptep, unsigned long trap, int local)
+ *		 pte_t *ptep, unsigned long trap, int local, int ssize)
  */
 
 /*
@@ -557,7 +557,8 @@
 	mr	r4,r31			/* PTE.pte */
 	li	r5,0			/* PTE.hidx */
 	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARM(r8)(r1)	/* local */
+	ld	r7,STK_PARM(r9)(r1)	/* ssize */
+	ld	r8,STK_PARM(r8)(r1)	/* local */
 	bl	.flush_hash_page
 	b	htab_insert_pte
 	
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c78dc91..f09730b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -51,6 +51,7 @@
 #include <asm/cputable.h>
 #include <asm/sections.h>
 #include <asm/spu.h>
+#include <asm/udbg.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -791,8 +792,7 @@
 	}
 	if (user_region) {
 		if (psize != get_paca()->context.user_psize) {
-			get_paca()->context.user_psize =
-				mm->context.user_psize;
+			get_paca()->context = mm->context;
 			slb_flush_and_rebolt();
 		}
 	} else if (get_paca()->vmalloc_sllp !=
@@ -885,6 +885,9 @@
 	local_irq_restore(flags);
 }
 
+/* WARNING: This is called from hash_low_64.S, if you change this prototype,
+ *          do not forget to update the assembly call site !
+ */
 void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize,
 		     int local)
 {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index d9c82d3..c0f5cff 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -19,8 +19,6 @@
  *
  */
 
-#undef DEBUG
-
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -66,12 +64,6 @@
 
 #include "mmu_decl.h"
 
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
 #if PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
@@ -175,8 +167,8 @@
 		int size = pgtable_cache_size[i];
 		const char *name = pgtable_cache_name[i];
 
-		DBG("Allocating page table cache %s (#%d) "
-		    "for size: %08x...\n", name, i, size);
+		pr_debug("Allocating page table cache %s (#%d) "
+			"for size: %08x...\n", name, i, size);
 		pgtable_cache[i] = kmem_cache_create(name,
 						     size, size,
 						     SLAB_PANIC,
@@ -239,8 +231,8 @@
 		if (!p)
 			return -ENOMEM;
 
-		printk(KERN_WARNING "vmemmap %08lx allocated at %p, "
-		                    "physical %08lx.\n", start, p, __pa(p));
+		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
+			start, p, __pa(p));
 
 		mapped = htab_bolt_mapping(start, start + page_size,
 					__pa(p), mode_rw, mmu_linear_psize,
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index c94a64f..eb3a732 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -61,12 +61,12 @@
 #define mmu_mapin_ram()		(0UL)
 
 #elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(void);
 
 #elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(void);
 extern void adjust_total_lowmem(void);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index bbd2c51..27922df 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -25,6 +25,7 @@
 #include <asm/smp.h>
 #include <asm/firmware.h>
 #include <linux/compiler.h>
+#include <asm/udbg.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -148,6 +149,35 @@
 	slb_flush_and_rebolt();
 }
 
+/* Helper function to compare esids.  There are four cases to handle.
+ * 1. The system is not 1T segment size capable.  Use the GET_ESID compare.
+ * 2. The system is 1T capable, both addresses are < 1T, use the GET_ESID compare.
+ * 3. The system is 1T capable, only one of the two addresses is > 1T.  This is not a match.
+ * 4. The system is 1T capable, both addresses are > 1T, use the GET_ESID_1T macro to compare.
+ */
+static inline int esids_match(unsigned long addr1, unsigned long addr2)
+{
+	int esid_1t_count;
+
+	/* System is not 1T segment size capable. */
+	if (!cpu_has_feature(CPU_FTR_1T_SEGMENT))
+		return (GET_ESID(addr1) == GET_ESID(addr2));
+
+	esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) +
+				((addr2 >> SID_SHIFT_1T) != 0));
+
+	/* both addresses are < 1T */
+	if (esid_1t_count == 0)
+		return (GET_ESID(addr1) == GET_ESID(addr2));
+
+	/* One address < 1T, the other > 1T.  Not a match */
+	if (esid_1t_count == 1)
+		return 0;
+
+	/* Both addresses are > 1T. */
+	return (GET_ESID_1T(addr1) == GET_ESID_1T(addr2));
+}
+
 /* Flush all user entries from the segment table of the current processor. */
 void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -193,15 +223,14 @@
 		return;
 	slb_allocate(pc);
 
-	if (GET_ESID(pc) == GET_ESID(stack))
+	if (esids_match(pc,stack))
 		return;
 
 	if (is_kernel_addr(stack))
 		return;
 	slb_allocate(stack);
 
-	if ((GET_ESID(pc) == GET_ESID(unmapped_base))
-	    || (GET_ESID(stack) == GET_ESID(unmapped_base)))
+	if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
 		return;
 
 	if (is_kernel_addr(unmapped_base))
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index eafbca5..e2d867c 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -54,12 +54,10 @@
 	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
 	  / sizeof(pgtable_free_t))
 
-#ifdef CONFIG_SMP
 static void pte_free_smp_sync(void *arg)
 {
 	/* Do nothing, just ensure we sync with all CPUs */
 }
-#endif
 
 /* This is only called when we are critically out of memory
  * (and fail to get a page in pte_free_tlb).
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 151fd8b..04f74f9 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -158,6 +158,18 @@
 	return virq;
 }
 
+void iic_setup_cpu(void)
+{
+	out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+u8 iic_get_target_id(int cpu)
+{
+	return per_cpu(iic, cpu).target_id;
+}
+
+EXPORT_SYMBOL_GPL(iic_get_target_id);
+
 #ifdef CONFIG_SMP
 
 /* Use the highest interrupt priorities for IPI */
@@ -166,29 +178,17 @@
 	return IIC_IRQ_TYPE_IPI + 0xf - ipi;
 }
 
-void iic_setup_cpu(void)
-{
-	out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
-}
-
 void iic_cause_IPI(int cpu, int mesg)
 {
 	out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4);
 }
 
-u8 iic_get_target_id(int cpu)
-{
-	return per_cpu(iic, cpu).target_id;
-}
-EXPORT_SYMBOL_GPL(iic_get_target_id);
-
 struct irq_host *iic_get_irq_host(int node)
 {
 	return iic_host;
 }
 EXPORT_SYMBOL_GPL(iic_get_irq_host);
 
-
 static irqreturn_t iic_ipi_action(int irq, void *dev_id)
 {
 	int ipi = (int)(long)dev_id;
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 1c0acba..e443845 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -44,6 +44,7 @@
 #include <asm/rtas.h>
 
 #include "interrupt.h"
+#include <asm/udbg.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c
index 1769d75..ddfb35a 100644
--- a/arch/powerpc/platforms/celleb/setup.c
+++ b/arch/powerpc/platforms/celleb/setup.c
@@ -49,6 +49,7 @@
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/irq.h>
+#include <asm/time.h>
 #include <asm/spu_priv1.h>
 #include <asm/firmware.h>
 #include <asm/of_platform.h>
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 69f1b43..a1c2360 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -1,9 +1,13 @@
 #ifndef	_ISERIES_IRQ_H
 #define	_ISERIES_IRQ_H
 
+#ifdef CONFIG_PCI
 extern void iSeries_init_IRQ(void);
 extern int  iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32);
 extern void iSeries_activate_IRQs(void);
+#else
+#define iSeries_init_IRQ	NULL
+#endif
 extern unsigned int iSeries_get_irq(void);
 
 #endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 37ae07e..0877a88 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -617,10 +617,6 @@
 	}
 }
 
-#ifndef CONFIG_PCI
-void __init iSeries_init_IRQ(void) { }
-#endif
-
 static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size,
 				     unsigned long flags)
 {
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index d6435b0..be06cfd 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -523,15 +523,16 @@
 static int __init iseries_vio_init(void)
 {
 	struct device_node *vio_root;
+	int ret = -ENODEV;
 
 	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return -ENODEV;
+		goto out;
 
 	iommu_vio_init();
 
 	vio_root = of_find_node_by_path("/vdevice");
 	if (!vio_root)
-		return -ENODEV;
+		goto out;
 
 	if (viopath_hostLp == HvLpIndexInvalid) {
 		vio_set_hostlp();
@@ -544,10 +545,11 @@
 	get_viocd_info(vio_root);
 	get_viotape_info(vio_root);
 
-	return 0;
+	ret = 0;
 
  put_node:
 	of_node_put(vio_root);
-	return -ENODEV;
+ out:
+	return ret;
 }
 arch_initcall(iseries_vio_init);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 22322b3..fb3d636 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -186,6 +186,11 @@
 	n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
 	printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
 
+	if (!dev) {
+		printk(KERN_WARNING "EEH: no PCI device for this of node\n");
+		return n;
+	}
+
 	/* Gather bridge-specific registers */
 	if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
 		rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
@@ -198,7 +203,7 @@
 	}
 
 	/* Dump out the PCI-X command and status regs */
-	cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX);
+	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
 	if (cap) {
 		rtas_read_config(pdn, cap, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
@@ -210,7 +215,7 @@
 	}
 
 	/* If PCI-E capable, dump PCI-E cap 10, and the AER */
-	cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_EXP);
+	cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (cap) {
 		n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
 		printk(KERN_WARNING
@@ -222,7 +227,7 @@
 			printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
 		}
 
-		cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR);
+		cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 		if (cap) {
 			n += scnprintf(buf+n, len-n, "pci-e AER:\n");
 			printk(KERN_WARNING
@@ -318,7 +323,7 @@
 
 		if (rets[2] == 0) return -1; /* permanently unavailable */
 
-		if (max_wait_msecs <= 0) return -1;
+		if (max_wait_msecs <= 0) break;
 
 		mwait = rets[2];
 		if (mwait <= 0) {
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 15e015e..57e025e 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -105,17 +105,18 @@
 		return;
 
 	rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
+
+	/* A driver that needs a reset trumps all others */
+	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
-	if (*res == PCI_ERS_RESULT_DISCONNECT &&
-	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 }
 
 /**
  * eeh_report_mmio_enabled - tell drivers that MMIO has been enabled
  *
- * Report an EEH error to each device driver, collect up and
- * merge the device driver responses. Cumulative response
- * passed back in "userdata".
+ * Tells each device driver that IO ports, MMIO and config space I/O
+ * are now enabled. Collects up and merges the device driver responses.
+ * Cumulative response passed back in "userdata".
  */
 
 static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
@@ -123,17 +124,16 @@
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
 
-	// dev->error_state = pci_channel_mmio_enabled;
-
 	if (!driver ||
 	    !driver->err_handler ||
 	    !driver->err_handler->mmio_enabled)
 		return;
 
 	rc = driver->err_handler->mmio_enabled (dev);
+
+	/* A driver that needs a reset trumps all others */
+	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
-	if (*res == PCI_ERS_RESULT_DISCONNECT &&
-	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 8b18a1c..b765b7c 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -25,6 +25,7 @@
 
 #include <asm/firmware.h>
 #include <asm/prom.h>
+#include <asm/udbg.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 2793a1b..f15222b 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -171,6 +171,7 @@
 	struct pci_dn *pdn;
 	int hwirq, virq, i, rc;
 	struct msi_desc *entry;
+	struct msi_msg msg;
 
 	pdn = get_pdn(pdev);
 	if (!pdn)
@@ -213,6 +214,11 @@
 
 		dev_dbg(&pdev->dev, "rtas_msi: allocated virq %d\n", virq);
 		set_irq_msi(virq, entry);
+
+		/* Read config space back so we can restore after reset */
+		read_msi_msg(virq, &msg);
+		entry->msg = msg;
+
 		unmask_msi_irq(virq);
 	}
 
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 66c8ad4..165981c 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -77,8 +77,6 @@
 	int i = 0;
 	int ret = 0;
 
-	printk("cpm_muram_init\n");
-
 	spin_lock_init(&cpm_muram_lock);
 	/* initialize the info header */
 	rh_init(&cpm_muram_info, 1,
@@ -193,7 +191,7 @@
 EXPORT_SYMBOL(cpm_muram_addr);
 
 /**
- * cpm_muram_phys - turn a muram virtual address into a DMA address
+ * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
  */
 dma_addr_t cpm_muram_dma(void __iomem *addr)
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 7c1b27a..216c0f5 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -137,6 +137,7 @@
 static struct irq_chip i8259_pic = {
 	.typename	= " i8259    ",
 	.mask		= i8259_mask_irq,
+	.disable	= i8259_mask_irq,
 	.unmask		= i8259_unmask_irq,
 	.mask_ack	= i8259_mask_and_ack_irq,
 };
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 9b3baa7..6933f9c 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -24,8 +24,9 @@
 #define MV64X60_VAL_LEN_MAX		11
 #define MV64X60_PCICFG_CPCI_HOTSWAP	0x68
 
-static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off,
-				   size_t count)
+static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf,
+				   loff_t off, size_t count)
 {
 	struct pci_dev *phb;
 	u32 v;
@@ -44,8 +45,9 @@
 	return sprintf(buf, "0x%08x\n", v);
 }
 
-static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off,
-				    size_t count)
+static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
+				    struct bin_attribute *attr, char *buf,
+				    loff_t off, size_t count)
 {
 	struct pci_dev *phb;
 	u32 v;
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index fba7ca1..59e77eb 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -244,6 +244,16 @@
 	andis.	r10,r0,DBCR0_IC@h
 	bnel-	load_dbcr0
 #endif
+#ifdef CONFIG_44x
+	lis	r4,icache_44x_need_flush@ha
+	lwz	r5,icache_44x_need_flush@l(r4)
+	cmplwi	cr0,r5,0
+	bne-	2f
+1:
+#endif /* CONFIG_44x */
+BEGIN_FTR_SECTION
+	lwarx	r7,0,r1
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 	lwz	r4,_LINK(r1)
 	lwz	r5,_CCR(r1)
@@ -258,6 +268,12 @@
 	mtspr	SPRN_SRR1,r8
 	SYNC
 	RFI
+#ifdef CONFIG_44x
+2:	li	r7,0
+	iccci	r0,r0
+	stw	r7,icache_44x_need_flush@l(r4)
+	b	1b
+#endif  /* CONFIG_44x */
 
 66:	li	r3,-ENOSYS
 	b	ret_from_syscall
@@ -679,6 +695,16 @@
 
 	/* interrupts are hard-disabled at this point */
 restore:
+#ifdef CONFIG_44x
+	lis	r4,icache_44x_need_flush@ha
+	lwz	r5,icache_44x_need_flush@l(r4)
+	cmplwi	cr0,r5,0
+	beq+	1f
+	li	r6,0
+	iccci	r0,r0
+	stw	r6,icache_44x_need_flush@l(r4)
+1:
+#endif  /* CONFIG_44x */
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -690,6 +716,9 @@
 	mtctr	r11
 
 	PPC405_ERR77(0,r1)
+BEGIN_FTR_SECTION
+	lwarx	r11,0,r1
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index a22e1f4..e0c850d 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -224,7 +224,16 @@
  */
 _GLOBAL(_tlbie)
 #if defined(CONFIG_40x)
+	/* We run the search with interrupts disabled because we have to change
+	 * the PID and I don't want to preempt when that happens.
+	 */
+	mfmsr	r5
+	mfspr	r6,SPRN_PID
+	wrteei	0
+	mtspr	SPRN_PID,r4
 	tlbsx.	r3, 0, r3
+	mtspr	SPRN_PID,r6
+	wrtee	r5
 	bne	10f
 	sync
 	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -234,22 +243,21 @@
 	isync
 10:
 #elif defined(CONFIG_44x)
-	mfspr	r4,SPRN_MMUCR
-	mfspr	r5,SPRN_PID			/* Get PID */
-	rlwimi	r4,r5,0,24,31			/* Set TID */
+	mfspr	r5,SPRN_MMUCR
+	rlwimi	r5,r4,0,24,31			/* Set TID */
 
 	/* We have to run the search with interrupts disabled, even critical
 	 * and debug interrupts (in fact the only critical exceptions we have
 	 * are debug and machine check).  Otherwise  an interrupt which causes
 	 * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
-	mfmsr	r5
+	mfmsr	r4
 	lis	r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
 	addi	r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
-	andc	r6,r5,r6
+	andc	r6,r4,r6
 	mtmsr	r6
-	mtspr	SPRN_MMUCR,r4
+	mtspr	SPRN_MMUCR,r5
 	tlbsx.	r3, 0, r3
-	mtmsr	r5
+	mtmsr	r4
 	bne	10f
 	sync
 	/* There are only 64 TLB entries, so r3 < 64,
@@ -491,12 +499,21 @@
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
+#ifndef CONFIG_44x
+	/* We don't flush the icache on 44x. Those have a virtual icache
+	 * and we don't have access to the virtual address here (it's
+	 * not the page vaddr but where it's mapped in user space). The
+	 * flushing of the icache on these is handled elsewhere, when
+	 * a change in the address space occurs, before returning to
+	 * user space
+	 */
 	mtctr	r4
 1:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	isync
+#endif /* CONFIG_44x */
 	blr
 
 /*
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
index 0a0a0487b..6536a25 100644
--- a/arch/ppc/mm/44x_mmu.c
+++ b/arch/ppc/mm/44x_mmu.c
@@ -61,6 +61,7 @@
  */
 unsigned int tlb_44x_index = 0;
 unsigned int tlb_44x_hwater = 62;
+int icache_44x_need_flush;
 
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index 838e09d..ea785db 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -99,13 +99,12 @@
 
 	v = KERNELBASE;
 	p = PPC_MEMSTART;
-	s = 0;
+	s = total_lowmem;
 
-	if (__map_without_ltlbs) {
-		return s;
-	}
+	if (__map_without_ltlbs)
+		return 0;
 
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+	while (s >= LARGE_PAGE_SIZE_16M) {
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
@@ -117,10 +116,10 @@
 
 		v += LARGE_PAGE_SIZE_16M;
 		p += LARGE_PAGE_SIZE_16M;
-		s += LARGE_PAGE_SIZE_16M;
+		s -= LARGE_PAGE_SIZE_16M;
 	}
 
-	while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+	while (s >= LARGE_PAGE_SIZE_4M) {
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
@@ -129,8 +128,8 @@
 
 		v += LARGE_PAGE_SIZE_4M;
 		p += LARGE_PAGE_SIZE_4M;
-		s += LARGE_PAGE_SIZE_4M;
+		s -= LARGE_PAGE_SIZE_4M;
 	}
 
-	return s;
+	return total_lowmem - s;
 }
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
index 254c23b..36c0e75 100644
--- a/arch/ppc/mm/fault.c
+++ b/arch/ppc/mm/fault.c
@@ -227,7 +227,7 @@
 					set_bit(PG_arch_1, &page->flags);
 				}
 				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address);
+				_tlbie(address, mm->context.id);
 				pte_unmap_unlock(ptep, ptl);
 				up_read(&mm->mmap_sem);
 				return 0;
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
index 540f329..f1d4f21 100644
--- a/arch/ppc/mm/mmu_decl.h
+++ b/arch/ppc/mm/mmu_decl.h
@@ -54,12 +54,12 @@
 #define mmu_mapin_ram()		(0UL)
 
 #elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(void);
 
 #elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg)	_tlbie(va)
+#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(void);
 extern void adjust_total_lowmem(void);
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 05d7184..453643a 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -236,7 +236,7 @@
 	gen550_init(0, &port);
 
 	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE);
+	_tlbie(UART0_IO_BASE, 0);
 #endif
 
 	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index 4b16961..b79ebb8 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -230,10 +230,15 @@
 
 	/* Allocate hoses for PCIX1 and PCIX2 */
 	hose1 = pcibios_alloc_controller();
-	hose2 = pcibios_alloc_controller();
-	if (!hose1 || !hose2)
+	if (!hose1)
 		return;
 
+	hose2 = pcibios_alloc_controller();
+	if (!hose2) {
+		pcibios_free_controller(hose1);
+		return;
+	}
+
 	/* Setup PCIX1 */
 	hose1->first_busno = 0;
 	hose1->last_busno = 0xff;
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index fd0f971..28a712c 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -259,7 +259,7 @@
 	gen550_init(0, &port);
 
 	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE);
+	_tlbie(UART0_IO_BASE, 0);
 #endif
 
 	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index 888c492..f6a0c66 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -316,7 +316,7 @@
 	gen550_init(0, &port);
 
 	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE);
+	_tlbie(UART0_IO_BASE, 0);
 #endif
 
 	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
index 1e5a00a4..559f27c 100644
--- a/arch/ppc/syslib/i8259.c
+++ b/arch/ppc/syslib/i8259.c
@@ -127,6 +127,7 @@
 static struct irq_chip i8259_pic = {
 	.typename	= " i8259    ",
 	.mask		= i8259_mask_irq,
+	.disable	= i8259_mask_irq,
 	.unmask		= i8259_unmask_irq,
 	.mask_ack	= i8259_mask_and_ack_irq,
 };
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 15f0d73..46588fa 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -25,6 +25,7 @@
 #include <asm/machdep.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/ppc_sys.h>
 
 #include "cpm2_pic.h"
 
@@ -61,7 +62,7 @@
 #endif
 
 	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
-				in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET));
+			in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
 
 	m82xx_board_setup();
 }
@@ -147,12 +148,12 @@
 	seq_printf(m, "vendor\t\t: %s\n"
 		   "machine\t\t: %s\n"
 		   "\n"
-		   "mem size\t\t: 0x%08x\n"
-		   "console baud\t\t: %d\n"
+		   "mem size\t\t: 0x%08lx\n"
+		   "console baud\t\t: %ld\n"
 		   "\n"
-		   "core clock\t: %u MHz\n"
-		   "CPM  clock\t: %u MHz\n"
-		   "bus  clock\t: %u MHz\n",
+		   "core clock\t: %lu MHz\n"
+		   "CPM  clock\t: %lu MHz\n"
+		   "bus  clock\t: %lu MHz\n",
 		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
 		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
 		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index e6289ee..8bf4ae1 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -200,11 +200,13 @@
 		cc = __tprot(addr);
 		while (cc == old_cc) {
 			addr += CHUNK_INCR;
-			cc = __tprot(addr);
+			if (addr >= memsize)
+				break;
 #ifndef CONFIG_64BIT
 			if (addr == ADDR2G)
 				break;
 #endif
+			cc = __tprot(addr);
 		}
 
 		if (old_addr != addr &&
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 96492cf..29f7884 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -92,6 +92,7 @@
 
 void do_monitor_call(struct pt_regs *regs, long interruption_code)
 {
+#ifdef CONFIG_SMP
 	struct s390_idle_data *idle;
 
 	idle = &__get_cpu_var(s390_idle);
@@ -99,7 +100,7 @@
 	idle->idle_time += get_clock() - idle->idle_enter;
 	idle->in_idle = 0;
 	spin_unlock(&idle->lock);
-
+#endif
 	/* disable monitor call class 0 */
 	__ctl_clear_bit(8, 15);
 
@@ -114,7 +115,9 @@
 static void default_idle(void)
 {
 	int cpu, rc;
+#ifdef CONFIG_SMP
 	struct s390_idle_data *idle;
+#endif
 
 	/* CPU is going idle. */
 	cpu = smp_processor_id();
@@ -151,13 +154,14 @@
 		s390_handle_mcck();
 		return;
 	}
-
+#ifdef CONFIG_SMP
 	idle = &__get_cpu_var(s390_idle);
 	spin_lock(&idle->lock);
 	idle->idle_count++;
 	idle->in_idle = 1;
 	idle->idle_enter = get_clock();
 	spin_unlock(&idle->lock);
+#endif
 	trace_hardirqs_on();
 	/* Wait for external, I/O or machine check interrupt. */
 	__load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 1d97fe1..b05ae85 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -788,14 +788,14 @@
 	}
 	new_time = idle->idle_time;
 	spin_unlock_irq(&idle->lock);
-	return sprintf(buf, "%llu us\n", new_time >> 12);
+	return sprintf(buf, "%llu\n", new_time >> 12);
 }
-static SYSDEV_ATTR(idle_time, 0444, show_idle_time, NULL);
+static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL);
 
 static struct attribute *cpu_attrs[] = {
 	&attr_capability.attr,
 	&attr_idle_count.attr,
-	&attr_idle_time.attr,
+	&attr_idle_time_us.attr,
 	NULL,
 };
 
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 48dae49..22b800c 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -145,12 +145,8 @@
 	do_timer(ticks);
 #endif
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	account_tick_vtime(current);
-#else
 	while (ticks--)
 		update_process_times(user_mode(get_irq_regs()));
-#endif
 
 	s390_do_profile();
 }
@@ -307,7 +303,7 @@
 
 static struct clocksource clocksource_tod = {
 	.name		= "tod",
-	.rating		= 100,
+	.rating		= 400,
 	.read		= read_tod_clock,
 	.mask		= -1ULL,
 	.mult		= 1000,
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 84ff78d..c5f05b3 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -32,7 +32,7 @@
  * Update process times based on virtual cpu times stored by entry.S
  * to the lowcore fields user_timer, system_timer & steal_clock.
  */
-void account_tick_vtime(struct task_struct *tsk)
+void account_process_tick(struct task_struct *tsk, int user_tick)
 {
 	cputime_t cputime;
 	__u64 timer, clock;
@@ -64,12 +64,6 @@
 		S390_lowcore.steal_clock -= cputime << 12;
 		account_steal_time(tsk, cputime);
 	}
-
-	run_local_timers();
-	if (rcu_pending(smp_processor_id()))
-		rcu_check_callbacks(smp_processor_id(), rcu_user_flag);
-	scheduler_tick();
- 	run_posix_cpu_timers(tsk);
 }
 
 /*
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 22a3eb3..496d635 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -211,10 +211,12 @@
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
 	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
 	help
-	  Select SolutionEngine if configuring for a Hitachi SH7709
-	  or SH7750 evaluation board.
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
 
 config SH_7206_SOLUTION_ENGINE
 	bool "SolutionEngine7206"
@@ -603,7 +605,7 @@
 
 config UBC_WAKEUP
 	bool "Wakeup UBC on startup"
-	depends on CPU_SH4
+	depends on CPU_SH4 && !CPU_SH4A
 	help
 	  Selecting this option will wakeup the User Break Controller (UBC) on
 	  startup. Although the UBC is left in an awake state when the processor
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index ab2f9f3..722da68 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -124,12 +124,13 @@
 
 config SH_KGDB_CONSOLE
 	bool "Console messages through GDB"
-	depends on !SERIAL_SH_SCI_CONSOLE
+	depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 	default n
 
 config KGDB_SYSRQ
 	bool "Allow SysRq 'G' to enter KGDB"
+	depends on MAGIC_SYSRQ
 	default y
 
 comment "Serial port setup"
diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c
index 943f93a..e55c668 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/irq.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hs7751rvoip.h>
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
index fa5fa39..c056259 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c
@@ -15,20 +15,6 @@
 #include <asm/io.h>
 #include <asm/machvec.h>
 
-static struct ipr_data hs77501rvoip_ipr_map[] = {
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-	{ DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-#endif
-};
-
-static void __init hs7751rvoip_init_irq(void)
-{
-	make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map));
-
-	init_hs7751rvoip_IRQ();
-}
-
 static void hs7751rvoip_power_off(void)
 {
 	ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
@@ -75,14 +61,13 @@
 
 	return 0;
 }
+device_initcall(hs7751rvoip_cf_init);
 
 /*
  * Initialize the board
  */
 static void __init hs7751rvoip_setup(char **cmdline_p)
 {
-	device_initcall(hs7751rvoip_cf_init);
-
 	ctrl_outb(0xf0, PA_OUTPORTR);
 	pm_power_off = hs7751rvoip_power_off;
 
@@ -115,6 +100,6 @@
 	.mv_outsw		= hs7751rvoip_outsw,
 	.mv_outsl		= hs7751rvoip_outsl,
 
-	.mv_init_irq		= hs7751rvoip_init_irq,
+	.mv_init_irq		= init_hs7751rvoip_IRQ,
 	.mv_ioport_map		= hs7751rvoip_ioport_map,
 };
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
index 2dce8bd..0d56fd8 100644
--- a/arch/sh/boards/renesas/sh7710voipgw/setup.c
+++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c
@@ -11,7 +11,6 @@
 #include <asm/machvec.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 
 static struct ipr_data sh7710voipgw_ipr_map[] = {
 	{ TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
index 27da884..9d5bfc7 100644
--- a/arch/sh/boards/se/7206/irq.c
+++ b/arch/sh/boards/se/7206/irq.c
@@ -9,7 +9,6 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <asm/se7206.h>
 
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index d07a336..318bc8a 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -94,6 +94,7 @@
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
 };
 
 static struct resource heartbeat_resources[] = {
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 20f0640..eb97dca 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -16,8 +16,13 @@
 #include <asm/machvec.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
+#include <asm/heartbeat.h>
 
 /* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start  = PA_LED,
@@ -29,6 +34,9 @@
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources  = ARRAY_SIZE(heartbeat_resources),
 	.resource       = heartbeat_resources,
 };
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
index 76e53b2..0f08ab3 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/se/7780/setup.c
@@ -14,8 +14,13 @@
 #include <asm/machvec.h>
 #include <asm/se7780.h>
 #include <asm/io.h>
+#include <asm/heartbeat.h>
 
 /* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start  = PA_LED,
@@ -27,6 +32,9 @@
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources  = ARRAY_SIZE(heartbeat_resources),
 	.resource       = heartbeat_resources,
 };
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/snapgear/Makefile
index 59fc976..d2d2f4b 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/snapgear/Makefile
@@ -2,5 +2,4 @@
 # Makefile for the SnapGear specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o rtc.o
-
+obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
deleted file mode 100644
index edb3dd9..0000000
--- a/arch/sh/boards/snapgear/rtc.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/****************************************************************************/
-/*
- * linux/arch/sh/boards/snapgear/rtc.c -- Secureedge5410 RTC code
- *
- *  Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- *  Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * The SecureEdge5410 can have one of 2 real time clocks, the SH
- * built in version or the preferred external DS1302.  Here we work out
- * each to see what we have and then run with it.
- */
-/****************************************************************************/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/mc146818rtc.h>
-#include <asm/io.h>
-
-static int use_ds1302;
-
-/****************************************************************************/
-/*
- *	we need to implement a DS1302 driver here that can operate in
- *	conjunction with the builtin rtc driver which is already quite friendly
- */
-/*****************************************************************************/
-
-#define	RTC_CMD_READ	0x81		/* Read command */
-#define	RTC_CMD_WRITE	0x80		/* Write command */
-
-#define	RTC_ADDR_YEAR	0x06		/* Address of year register */
-#define	RTC_ADDR_DAY	0x05		/* Address of day of week register */
-#define	RTC_ADDR_MON	0x04		/* Address of month register */
-#define	RTC_ADDR_DATE	0x03		/* Address of day of month register */
-#define	RTC_ADDR_HOUR	0x02		/* Address of hour register */
-#define	RTC_ADDR_MIN	0x01		/* Address of minute register */
-#define	RTC_ADDR_SEC	0x00		/* Address of second register */
-
-#define	RTC_RESET	0x1000
-#define	RTC_IODATA	0x0800
-#define	RTC_SCLK	0x0400
-
-#define set_dirp(x)
-#define get_dirp(x) 0
-#define set_dp(x)	SECUREEDGE_WRITE_IOPORT(x, 0x1c00)
-#define get_dp(x)	SECUREEDGE_READ_IOPORT()
-
-static void ds1302_sendbits(unsigned int val)
-{
-	int	i;
-
-	for (i = 8; (i); i--, val >>= 1) {
-		set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? RTC_IODATA : 0));
-		set_dp(get_dp() | RTC_SCLK);	// clock high
-		set_dp(get_dp() & ~RTC_SCLK);	// clock low
-	}
-}
-
-static unsigned int ds1302_recvbits(void)
-{
-	unsigned int	val;
-	int		i;
-
-	for (i = 0, val = 0; (i < 8); i++) {
-		val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i);
-		set_dp(get_dp() | RTC_SCLK);	// clock high
-		set_dp(get_dp() & ~RTC_SCLK);	// clock low
-	}
-	return(val);
-}
-
-static unsigned int ds1302_readbyte(unsigned int addr)
-{
-	unsigned int	val;
-	unsigned long	flags;
-
-	local_irq_save(flags);
-	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
-	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
-
-	set_dp(get_dp() | RTC_RESET);
-	ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ);
-	set_dirp(get_dirp() & ~RTC_IODATA);
-	val = ds1302_recvbits();
-	set_dp(get_dp() & ~RTC_RESET);
-	local_irq_restore(flags);
-
-	return(val);
-}
-
-static void ds1302_writebyte(unsigned int addr, unsigned int val)
-{
-	unsigned long	flags;
-
-	local_irq_save(flags);
-	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
-	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
-	set_dp(get_dp() | RTC_RESET);
-	ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE);
-	ds1302_sendbits(val);
-	set_dp(get_dp() & ~RTC_RESET);
-	local_irq_restore(flags);
-}
-
-static void ds1302_reset(void)
-{
-	unsigned long	flags;
-	/* Hardware dependent reset/init */
-	local_irq_save(flags);
-	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
-	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
-	local_irq_restore(flags);
-}
-
-/*****************************************************************************/
-
-static inline int bcd2int(int val)
-{
-	return((((val & 0xf0) >> 4) * 10) + (val & 0xf));
-}
-
-static inline int int2bcd(int val)
-{
-	return(((val / 10) << 4) + (val % 10));
-}
-
-/*****************************************************************************/
-/*
- *	Write and Read some RAM in the DS1302,  if it works assume it's there
- *	Otherwise use the SH4 internal RTC
- */
-
-void snapgear_rtc_gettimeofday(struct timespec *);
-int snapgear_rtc_settimeofday(const time_t);
-
-void __init secureedge5410_rtc_init(void)
-{
-	unsigned char *test = "snapgear";
-	int i;
-
-	ds1302_reset();
-
-	use_ds1302 = 1;
-
-	for (i = 0; test[i]; i++)
-		ds1302_writebyte(32 + i, test[i]);
-
-	for (i = 0; test[i]; i++)
-		if (ds1302_readbyte(32 + i) != test[i]) {
-			use_ds1302 = 0;
-			break;
-		}
-
-	if (use_ds1302) {
-		rtc_sh_get_time = snapgear_rtc_gettimeofday;
-		rtc_sh_set_time = snapgear_rtc_settimeofday;
-	}
-		
-	printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal");
-}
-
-/****************************************************************************/
-/*
- *	our generic interface that chooses the correct code to use
- */
-
-void snapgear_rtc_gettimeofday(struct timespec *ts)
-{
-	unsigned int sec, min, hr, day, mon, yr;
-
-	if (!use_ds1302)
-		return;
-
- 	sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC));
- 	min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN));
- 	hr  = bcd2int(ds1302_readbyte(RTC_ADDR_HOUR));
- 	day = bcd2int(ds1302_readbyte(RTC_ADDR_DATE));
- 	mon = bcd2int(ds1302_readbyte(RTC_ADDR_MON));
- 	yr  = bcd2int(ds1302_readbyte(RTC_ADDR_YEAR));
-
-bad_time:
-	if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
-	    hr > 23 || min > 59 || sec > 59) {
-		printk(KERN_ERR
-		       "SnapGear RTC: invalid value, resetting to 1 Jan 2000\n");
-		ds1302_writebyte(RTC_ADDR_MIN,  min = 0);
-		ds1302_writebyte(RTC_ADDR_HOUR, hr  = 0);
-		ds1302_writebyte(RTC_ADDR_DAY,        7);
-		ds1302_writebyte(RTC_ADDR_DATE, day = 1);
-		ds1302_writebyte(RTC_ADDR_MON,  mon = 1);
-		ds1302_writebyte(RTC_ADDR_YEAR, yr  = 0);
-		ds1302_writebyte(RTC_ADDR_SEC,  sec = 0);
-	}
-
-	ts->tv_sec = mktime(2000 + yr, mon, day, hr, min, sec);
-	if (ts->tv_sec < 0) {
-#if 0
-		printk("BAD TIME %d %d %d %d %d %d\n", yr, mon, day, hr, min, sec);
-#endif
-		yr = 100;
-		goto bad_time;
-	}
-	ts->tv_nsec = 0;
-}
-
-int snapgear_rtc_settimeofday(const time_t secs)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned long nowtime;
-
-	if (!use_ds1302)
-		return 0;
-
-/*
- *	This is called direct from the kernel timer handling code.
- *	It is supposed to synchronize the kernel clock to the RTC.
- */
-
-	nowtime = secs;
-
-	/* STOP RTC */
-	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80);
-
-	cmos_minutes = bcd2int(ds1302_readbyte(RTC_ADDR_MIN));
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		ds1302_writebyte(RTC_ADDR_MIN, int2bcd(real_minutes));
-		ds1302_writebyte(RTC_ADDR_SEC, int2bcd(real_seconds));
-	} else {
-		printk(KERN_WARNING
-		       "SnapGear RTC: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* START RTC */
-	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80);
-	return(0);
-}
-
-unsigned char secureedge5410_cmos_read(int addr)
-{
-	unsigned char val = 0;
-
-	if (!use_ds1302)
-		return(__CMOS_READ(addr, w));
-
-	switch(addr) {
-	case RTC_SECONDS:       val = ds1302_readbyte(RTC_ADDR_SEC);  break;
-	case RTC_SECONDS_ALARM:                                       break;
-	case RTC_MINUTES:       val = ds1302_readbyte(RTC_ADDR_MIN);  break;
-	case RTC_MINUTES_ALARM:                                       break;
-	case RTC_HOURS:         val = ds1302_readbyte(RTC_ADDR_HOUR); break;
-	case RTC_HOURS_ALARM:                                         break;
-	case RTC_DAY_OF_WEEK:   val = ds1302_readbyte(RTC_ADDR_DAY);  break;
-	case RTC_DAY_OF_MONTH:  val = ds1302_readbyte(RTC_ADDR_DATE); break;
-	case RTC_MONTH:         val = ds1302_readbyte(RTC_ADDR_MON);  break;
-	case RTC_YEAR:          val = ds1302_readbyte(RTC_ADDR_YEAR); break;
-	case RTC_REG_A:         /* RTC_FREQ_SELECT */                 break;
-	case RTC_REG_B:	        /* RTC_CONTROL */                     break;
-	case RTC_REG_C:	        /* RTC_INTR_FLAGS */                  break;
-	case RTC_REG_D:         val = RTC_VRT /* RTC_VALID */;        break;
-	default:                                                      break;
-	}
-
-	return(val);
-}
-
-void secureedge5410_cmos_write(unsigned char val, int addr)
-{
-	if (!use_ds1302) {
-		__CMOS_WRITE(val, addr, w);
-		return;
-	}
-
-	switch(addr) {
-	case RTC_SECONDS:       ds1302_writebyte(RTC_ADDR_SEC, val);  break;
-	case RTC_SECONDS_ALARM:                                       break;
-	case RTC_MINUTES:       ds1302_writebyte(RTC_ADDR_MIN, val);  break;
-	case RTC_MINUTES_ALARM:                                       break;
-	case RTC_HOURS:         ds1302_writebyte(RTC_ADDR_HOUR, val); break;
-	case RTC_HOURS_ALARM:                                         break;
-	case RTC_DAY_OF_WEEK:   ds1302_writebyte(RTC_ADDR_DAY, val);  break;
-	case RTC_DAY_OF_MONTH:  ds1302_writebyte(RTC_ADDR_DATE, val); break;
-	case RTC_MONTH:         ds1302_writebyte(RTC_ADDR_MON, val);  break;
-	case RTC_YEAR:          ds1302_writebyte(RTC_ADDR_YEAR, val); break;
-	case RTC_REG_A:         /* RTC_FREQ_SELECT */                 break;
-	case RTC_REG_B:        	/* RTC_CONTROL */                     break;
-	case RTC_REG_C:	        /* RTC_INTR_FLAGS */                  break;
-	case RTC_REG_D:	        /* RTC_VALID */                       break;
-	default:                                                      break;
-	}
-}
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index 2b594f6..7022483 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -22,20 +22,15 @@
 #include <asm/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/rtc.h>
 #include <asm/cpu/timer.h>
 
-extern void secureedge5410_rtc_init(void);
-extern void pcibios_init(void);
-
-/****************************************************************************/
 /*
  * EraseConfig handling functions
  */
 
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000;
+	(void)ctrl_inb(0xb8000000);	/* dummy read */
 
 	printk("SnapGear: erase switch interrupt!\n");
 
@@ -76,19 +71,10 @@
 }
 
 /*
- * Initialize the board
- */
-static void __init snapgear_setup(char **cmdline_p)
-{
-	board_time_init = secureedge5410_rtc_init;
-}
-
-/*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_setup		= snapgear_setup,
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= snapgear_inb,
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 4c5ffdc..1b0f5be 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -39,7 +39,7 @@
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
+		   -C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 $(obj)/uImage: $(obj)/zImage FORCE
diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile
index a106dd9..f7de407 100644
--- a/arch/sh/cchips/hd6446x/Makefile
+++ b/arch/sh/cchips/hd6446x/Makefile
@@ -1,2 +1,4 @@
 obj-$(CONFIG_HD64461)	+= hd64461.o
 obj-$(CONFIG_HD64465)	+= hd64465/
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile
index 085de72..f73963c 100644
--- a/arch/sh/cchips/voyagergx/Makefile
+++ b/arch/sh/cchips/voyagergx/Makefile
@@ -6,3 +6,4 @@
 
 obj-$(CONFIG_USB_OHCI_HCD)	+= consistent.o
 
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 2f65ac7..fba6b5b 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -5,7 +5,6 @@
 obj-y					+= pci.o
 obj-$(CONFIG_PCI_AUTO)			+= pci-auto.o
 
-obj-$(CONFIG_CPU_SUBTYPE_ST40STB1)	+= pci-st40.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
deleted file mode 100644
index 0814a5a..0000000
--- a/arch/sh/drivers/pci/pci-st40.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/* 
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Support functions for the ST40 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <asm/pci.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>	/* irqreturn_t */
-
-#include "pci-st40.h"
-
-/* This is in P2 of course */
-#define ST40PCI_BASE_ADDRESS     (0xb0000000)
-#define ST40PCI_MEM_ADDRESS      (ST40PCI_BASE_ADDRESS+0x0)
-#define ST40PCI_IO_ADDRESS       (ST40PCI_BASE_ADDRESS+0x06000000)
-#define ST40PCI_REG_ADDRESS      (ST40PCI_BASE_ADDRESS+0x07000000)
-
-#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x))
-#define ST40PCI_REG_INDEXED(reg, index) 				\
-	(ST40PCI_REG(reg##0) +					\
-	  ((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index))
-
-#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg))
-#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg))
-#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg))
-#define ST40PCI_WRITE_INDEXED(reg, index, val)				\
-	 writel((val), ST40PCI_REG_INDEXED(reg, index));
-
-#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg))
-#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg))
-#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg))
-
-#define ST40PCI_SERR_IRQ	64
-#define ST40PCI_ERR_IRQ        	65
-
-
-/* Macros to extract PLL params */
-#define PLL_MDIV(reg)  ( ((unsigned)reg) & 0xff )
-#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff )
-#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 )
-#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff )
-
-/* Build up the appropriate settings */
-#define PLL_SET(mdiv,ndiv,pdiv,setup) \
-( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19))
-
-#define PLLPCICR (0xbb040000+0x10)
-
-#define PLLPCICR_POWERON (1<<28)
-#define PLLPCICR_OUT_EN (1<<29)
-#define PLLPCICR_LOCKSELECT (1<<30)
-#define PLLPCICR_LOCK (1<<31)
-
-
-#define PLL_25MHZ 0x793c8512
-#define PLL_33MHZ PLL_SET(18,88,3,295)
-
-static void pci_set_rbar_region(unsigned int region,     unsigned long localAddr,
-			 unsigned long pciOffset, unsigned long regionSize);
-
-static __init void SetPCIPLL(void)
-{
-	{
-		/* Lets play with the PLL values */
-		unsigned long pll1cr1;
-		unsigned long mdiv, ndiv, pdiv;
-		unsigned long muxcr;
-		unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 };
-		unsigned int freq;
-
-#define CLKGENA            0xbb040000
-#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48
-		pll1cr1 = ctrl_inl(PLLPCICR);
-		printk("PLL1CR1 %08lx\n", pll1cr1);
-		mdiv = PLL_MDIV(pll1cr1);
-		ndiv = PLL_NDIV(pll1cr1);
-		pdiv = PLL_PDIV(pll1cr1);
-		printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv);
-		freq = ((2*27*ndiv)/mdiv) / (1 << pdiv);
-		printk("PLL freq %dMHz\n", freq);
-		muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR);
-		printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]);
-	}
-}
-
-
-struct pci_err {
-  unsigned mask;
-  const char *error_string;
-};
-
-static struct pci_err int_error[]={
-  { INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"},
-  { INT_TTADI,  "TTADI: Illegal byte enable in I/O transfer"},
-  { INT_TMTO,   "TMTO: Target memory read/write timeout"},
-  { INT_MDEI,   "MDEI: Master function disable error"},
-  { INT_APEDI,  "APEDI: Address parity error"},
-  { INT_SDI,    "SDI: SERR detected"},
-  { INT_DPEITW, "DPEITW: Data parity error target write"},
-  { INT_PEDITR, "PEDITR: PERR detected"},
-  { INT_TADIM,  "TADIM: Target abort detected"},
-  { INT_MADIM,  "MADIM: Master abort detected"},
-  { INT_MWPDI,  "MWPDI: PERR from target at data write"},
-  { INT_MRDPEI, "MRDPEI: Master read data parity error"}
-};
-#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error)
-
-static struct pci_err aint_error[]={
-  { AINT_MBI,   "MBI: Master broken"},
-  { AINT_TBTOI, "TBTOI: Target bus timeout"},
-  { AINT_MBTOI, "MBTOI: Master bus timeout"},
-  { AINT_TAI,   "TAI: Target abort"},
-  { AINT_MAI,   "MAI: Master abort"},
-  { AINT_RDPEI, "RDPEI: Read data parity"},
-  { AINT_WDPE,  "WDPE: Write data parity"}
-};
-
-#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error)
-
-static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors)
-{
-  int i;
-
-  for(i=0;i<num_errors;i++) {
-    if(reg & error[i].mask) {
-      printk("%s\n",error[i].error_string);
-    }
-  }
-
-}
-
-
-static char * pci_commands[16]={
-	"Int Ack",
-	"Special Cycle",
-	"I/O Read",
-	"I/O Write",
-	"Reserved",
-	"Reserved",
-	"Memory Read",
-	"Memory Write",
-	"Reserved",
-	"Reserved",
-	"Configuration Read",
-	"Configuration Write",
-	"Memory Read Multiple",
-	"Dual Address Cycle",
-	"Memory Read Line",
-	"Memory Write-and-Invalidate"
-};
-
-static irqreturn_t st40_pci_irq(int irq, void *dev_instance)
-{
-	unsigned pci_int, pci_air, pci_cir, pci_aint;
-	static int count=0;
-
-
-	pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT);
-	pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR);
-
-	/* Reset state to stop multiple interrupts */
-        ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0);
-
-
-	if(++count>1) return IRQ_HANDLED;
-
-	printk("** PCI ERROR **\n");
-
-        if(pci_int) {
-		printk("** INT register status\n");
-		print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS);
-	}
-
-        if(pci_aint) {
-		printk("** AINT register status\n");
-		print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS);
-	}
-
-	printk("** Address and command info\n");
-
-	printk("** Command  %s : Address 0x%x\n",
-	       pci_commands[pci_cir&0xf],pci_air);
-
-	if(pci_cir&CIR_PIOTEM) {
-		printk("CIR_PIOTEM:PIO transfer error for master\n");
-	}
-        if(pci_cir&CIR_RWTET) {
-		printk("CIR_RWTET:Read/Write transfer error for target\n");
-	}
-
-	return IRQ_HANDLED;
-}
-
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 r2p2(u32 num)
-{
-	int i = 31;
-	u32 tmp = num;
-
-	if (num == 0)
-		return 0;
-
-	do {
-		if (tmp & (1 << 31))
-			break;
-		i--;
-		tmp <<= 1;
-	} while (i >= 0);
-
-	tmp = 1 << i;
-	/* If the original number isn't a power of 2, round it up */
-	if (tmp != num)
-		tmp <<= 1;
-
-	return tmp;
-}
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-int __init st40pci_init(unsigned memStart, unsigned memSize)
-{
-	u32 lsr0;
-
-	SetPCIPLL();
-
-	/* Initialises the ST40 pci subsystem, performing a reset, then programming
-	 * up the address space decoders appropriately
-	 */
-
-	/* Should reset core here as well methink */
-
-	ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET);
-
-	/* Loop while core resets */
-	while (ST40PCI_READ(CR) & CR_SOFT_RESET);
-
-	/* Switch off interrupts */
-	ST40PCI_WRITE(INTM, 0);
-	ST40PCI_WRITE(AINT, 0);
-
-	/* Now, lets reset all the cards on the bus with extreme prejudice */
-	ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL);
-	udelay(250);
-
-	/* Set bus active, take it out of reset */
-	ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE);
-
-	/* The PCI spec says that no access must be made to the bus until 1 second
-	 * after reset. This seem ludicrously long, but some delay is needed here
-	 */
-	mdelay(1000);
-
-	/* Switch off interrupts */
-	ST40PCI_WRITE(INTM, 0);
-	ST40PCI_WRITE(AINT, 0);
-
-	/* Allow it to be a master */
-
-	ST40PCI_WRITE_SHORT(CSR_CMD,
-			    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			    PCI_COMMAND_IO);
-
-	/* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000
-	 * on the PCI bus. This allows a nice 1-1 bus to phys mapping.
-	 */
-
-
-	ST40PCI_WRITE(MBR, 0x10000000);
-	/* Always set the max size 128M (actually, it is only 96MB wide) */
-	ST40PCI_WRITE(MBMR, 0x07ff0000);
-
-	/* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to 
-	 * allow cards that have legacy io such as vga to function correctly. This gives a 
-	 * maximum of 64K of io/space as only the bottom 16 bits of the address are copied 
-	 * over to the bus  when the transaction is made. 64K of io space is more than enough
-	 */
-	ST40PCI_WRITE(IOBR, 0x0);
-	/* Set up the 64K window */
-	ST40PCI_WRITE(IOBMR, 0x0);
-
-	/* Now we set up the mbars so the PCI bus can see the local memory */
-	/* Expose a 256M window starting at PCI address 0... */
-	ST40PCI_WRITE(CSR_MBAR0, 0);
-	ST40PCI_WRITE(LSR0, 0x0fff0001);
-
-	/* ... and set up the initial incoming window to expose all of RAM */
-	pci_set_rbar_region(7, memStart, memStart, memSize);
-
-	/* Maximise timeout values */
-	ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff);
-	ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff);
-	ST40PCI_WRITE_BYTE(CSR_MIT, 0xff);
-
-	ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING);
-
-	return 1;
-}
-
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
-
-
-#define SET_CONFIG_BITS(bus,devfn,where)\
-  (((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0))
-
-#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
-
-
-static int CheckForMasterAbort(void)
-{
-	if (ST40PCI_READ(INT) & INT_MADIM) {
-		/* Should we clear config space version as well ??? */
-		ST40PCI_WRITE(INT, INT_MADIM);
-		ST40PCI_WRITE_SHORT(CSR_STATUS, 0);
-		return 1;
-	}
-
-	return 0;
-}
-
-/* Write to config register */
-static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-{
-	ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-	switch (size) {
-		case 1:
-			*val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3));
-			break;
-		case 2:
-			*val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2));
-			break;
-		case 4:
-			*val = ST40PCI_READ(PDR);
-			break;
-	}
-
-	if (CheckForMasterAbort()){
-		switch (size) {
-			case 1:
-				*val = (u8)0xff;
-				break;
-			case 2:
-				*val = (u16)0xffff;
-				break;
-			case 4:
-				*val = 0xffffffff;
-				break;
-		}
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-	ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
-	switch (size) {
-		case 1:
-			ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
-			break;
-		case 2:
-			ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
-			break;
-		case 4:
-			ST40PCI_WRITE(PDR, val);
-			break;
-	}
-
-	CheckForMasterAbort();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops st40pci_config_ops = {
-	.read = 	st40pci_read,
-	.write = 	st40pci_write,
-};
-
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-static int __init pcibios_init(void)
-{
-	extern unsigned long memory_start, memory_end;
-
-	printk(KERN_ALERT "pci-st40.c: pcibios_init\n");
-
-	if (sh_mv.mv_init_pci != NULL) {
-		sh_mv.mv_init_pci();
-	}
-
-	/* The pci subsytem needs to know where memory is and how much 
-	 * of it there is. I've simply made these globals. A better mechanism
-	 * is probably needed.
-	 */
-	st40pci_init(PHYSADDR(memory_start),
-		     PHYSADDR(memory_end) - PHYSADDR(memory_start));
-
-	if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq, 
-                        IRQF_DISABLED, "st40pci", NULL)) {
-		printk(KERN_ERR "st40pci: Cannot hook interrupt\n");
-		return -EIO;
-	}
-
-	/* Enable the PCI interrupts on the device */
-	ST40PCI_WRITE(INTM, ~0);
-	ST40PCI_WRITE(AINT, ~0);
-
-	/* Map the io address apprioately */
-#ifdef CONFIG_HD64465
-	hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1,
-			 ST40_IO_ADDR + PCIBIOS_MIN_IO, 0);
-#endif
-
-	/* ok, do the scan man */
-	pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL);
-	pci_assign_unassigned_resources();
-
-	return 0;
-}
-subsys_initcall(pcibios_init);
-
-/*
- * Publish a region of local address space over the PCI bus
- * to other devices.
- */
-static void pci_set_rbar_region(unsigned int region,     unsigned long localAddr,
-			 unsigned long pciOffset, unsigned long regionSize)
-{
-	unsigned long mask;
-
-	if (region > 7)
-		return;
-
-	if (regionSize > (512 * 1024 * 1024))
-		return;
-
-	mask = r2p2(regionSize) - 0x10000;
-
-	/* Disable the region (in case currently in use, should never happen) */
-	ST40PCI_WRITE_INDEXED(RSR, region, 0);
-
-	/* Start of local address space to publish */
-	ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) );
-
-	/* Start of region in PCI address space as an offset from MBAR0 */
-	ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset);
-
-	/* Size of region */
-	ST40PCI_WRITE_INDEXED(RSR, region, mask | 1);
-}
-
diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h
deleted file mode 100644
index cf0d35b..0000000
--- a/arch/sh/drivers/pci/pci-st40.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* 
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Definitions for the ST40 PCI hardware.
- */
-
-#ifndef __PCI_ST40_H__
-#define __PCI_ST40_H__
-
-#define ST40PCI_VCR_STATUS    0x00
-
-#define ST40PCI_VCR_VERSION   0x08
-
-#define ST40PCI_CR            0x10
-
-#define CR_SOFT_RESET (1<<12)
-#define CR_PFCS       (1<<11)
-#define CR_PFE        (1<<9)
-#define CR_BMAM       (1<<6)
-#define CR_HOST       (1<<5)
-#define CR_CLKEN      (1<<4)
-#define CR_SOCS       (1<<3)
-#define CR_IOCS       (1<<2)
-#define CR_RSTCTL     (1<<1)
-#define CR_CFINT      (1<<0)
-#define CR_LOCK_MASK  0x5a000000
-
-
-#define ST40PCI_LSR0          0X14
-#define ST40PCI_LAR0          0x1c
-
-#define ST40PCI_INT           0x24
-#define INT_MNLTDIM           (1<<15)
-#define INT_TTADI             (1<<14)
-#define INT_TMTO              (1<<9)
-#define INT_MDEI              (1<<8)
-#define INT_APEDI             (1<<7)
-#define INT_SDI               (1<<6)
-#define INT_DPEITW            (1<<5)
-#define INT_PEDITR            (1<<4)
-#define INT_TADIM             (1<<3)
-#define INT_MADIM             (1<<2)
-#define INT_MWPDI             (1<<1)
-#define INT_MRDPEI            (1<<0)
-
-
-#define ST40PCI_INTM          0x28
-#define ST40PCI_AIR           0x2c
-
-#define ST40PCI_CIR           0x30
-#define CIR_PIOTEM            (1<<31)
-#define CIR_RWTET             (1<<26)
-
-#define ST40PCI_AINT          0x40
-#define AINT_MBI              (1<<13)
-#define AINT_TBTOI            (1<<12)
-#define AINT_MBTOI            (1<<11)
-#define AINT_TAI              (1<<3)
-#define AINT_MAI              (1<<2)
-#define AINT_RDPEI            (1<<1)
-#define AINT_WDPE             (1<<0)
-
-#define ST40PCI_AINTM         0x44
-#define ST40PCI_BMIR          0x48
-#define ST40PCI_PAR           0x4c
-#define ST40PCI_MBR           0x50
-#define ST40PCI_IOBR          0x54
-#define ST40PCI_PINT          0x58
-#define ST40PCI_PINTM         0x5c
-#define ST40PCI_MBMR          0x70
-#define ST40PCI_IOBMR         0x74
-#define ST40PCI_PDR           0x78
-
-/* H8 specific registers start here */
-#define ST40PCI_WCBAR         0x7c
-#define ST40PCI_LOCCFG_UNLOCK 0x34
-
-#define ST40PCI_RBAR0         0x100
-#define ST40PCI_RSR0          0x104
-#define ST40PCI_RLAR0         0x108
-
-#define ST40PCI_RBAR1         0x110
-#define ST40PCI_RSR1          0x114
-#define ST40PCI_RLAR1         0x118
-
-
-#define ST40PCI_RBAR2         0x120
-#define ST40PCI_RSR2          0x124
-#define ST40PCI_RLAR2         0x128
-
-#define ST40PCI_RBAR3         0x130
-#define ST40PCI_RSR3          0x134
-#define ST40PCI_RLAR3         0x138
-
-#define ST40PCI_RBAR4         0x140
-#define ST40PCI_RSR4          0x144
-#define ST40PCI_RLAR4         0x148
-
-#define ST40PCI_RBAR5         0x150
-#define ST40PCI_RSR5          0x154
-#define ST40PCI_RLAR5         0x158
-
-#define ST40PCI_RBAR6         0x160
-#define ST40PCI_RSR6          0x164
-#define ST40PCI_RLAR6         0x168
-
-#define ST40PCI_RBAR7         0x170
-#define ST40PCI_RSR7          0x174
-#define ST40PCI_RLAR7         0x178
-
-
-#define ST40PCI_RBAR(n)      (0x100+(0x10*(n)))
-#define ST40PCI_RSR(n)       (0x104+(0x10*(n)))
-#define ST40PCI_RLAR(n)      (0x108+(0x10*(n)))
-
-#define ST40PCI_PERF               0x80
-#define PERF_MASTER_WRITE_POSTING  (1<<4)
-/* H8 specific registers end here */
-
-
-/* These are configs space registers */
-#define ST40PCI_CSR_VID               0x10000
-#define ST40PCI_CSR_DID               0x10002
-#define ST40PCI_CSR_CMD               0x10004
-#define ST40PCI_CSR_STATUS            0x10006
-#define ST40PCI_CSR_MBAR0             0x10010
-#define ST40PCI_CSR_TRDY              0x10040
-#define ST40PCI_CSR_RETRY             0x10041
-#define ST40PCI_CSR_MIT               0x1000d
-
-#define ST40_IO_ADDR 0xb6000000       
-
-#endif /* __PCI_ST40_H__ */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 1f141a8..4b81d9c 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -10,7 +10,6 @@
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
-
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
@@ -22,3 +21,5 @@
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 2b2a9e0..b6abf38 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -46,7 +46,7 @@
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
 #if defined (CONFIG_KGDB_NMI)
-	.long	debug_enter	/* 1C0 */	! Allow trap to debugger
+	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
 #else
 	.long	exception_none	/* 1C0 */	! Not implemented yet
 #endif
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 21375d7..bc9c28a 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -139,14 +139,6 @@
 		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
 					  CPU_HAS_LLSC;
 		break;
-	case 0x8000:
-		boot_cpu_data.type = CPU_ST40RA;
-		boot_cpu_data.flags |= CPU_HAS_FPU;
-		break;
-	case 0x8100:
-		boot_cpu_data.type = CPU_ST40GX1;
-		boot_cpu_data.flags |= CPU_HAS_FPU;
-		break;
 	case 0x700:
 		boot_cpu_data.type = CPU_SH4_501;
 		boot_cpu_data.icache.ways = 2;
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 348da19..0586bc6 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
-#include <linux/irq.h>
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index 2fdc700..d453c3a 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -102,6 +102,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/module.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <asm/current.h>
@@ -116,7 +117,9 @@
 kgdb_bus_error_hook_t *kgdb_bus_err_hook;
 
 int (*kgdb_getchar)(void);
+EXPORT_SYMBOL_GPL(kgdb_getchar);
 void (*kgdb_putchar)(int);
+EXPORT_SYMBOL_GPL(kgdb_putchar);
 
 static void put_debug_char(int c)
 {
@@ -136,7 +139,7 @@
 #define NUMREGBYTES (MAXREG*4)
 #define OUTBUFMAX (NUMREGBYTES*2+512)
 
-enum regs {
+enum {
 	R0 = 0, R1,  R2,  R3,   R4,   R5,  R6, R7,
 	R8, R9, R10, R11, R12,  R13,  R14, R15,
 	PC, PR, GBR, VBR, MACH, MACL, SR,
@@ -176,9 +179,13 @@
 
 /* SCI/UART settings, used in kgdb_console_setup() */
 int  kgdb_portnum = CONFIG_KGDB_DEFPORT;
+EXPORT_SYMBOL_GPL(kgdb_portnum);
 int  kgdb_baud = CONFIG_KGDB_DEFBAUD;
+EXPORT_SYMBOL_GPL(kgdb_baud);
 char kgdb_parity = CONFIG_KGDB_DEFPARITY;
+EXPORT_SYMBOL_GPL(kgdb_parity);
 char kgdb_bits = CONFIG_KGDB_DEFBITS;
+EXPORT_SYMBOL_GPL(kgdb_bits);
 
 /* Jump buffer for setjmp/longjmp */
 static jmp_buf rem_com_env;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 0b8c45d..4156aac 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -303,7 +303,6 @@
 	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
 	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",
 	[CPU_SH7760]	= "SH7760",
-	[CPU_ST40RA]	= "ST40RA",	[CPU_ST40GX1]	= "ST40GX1",
 	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
 	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
 	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 548e428..e1a6de9 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -106,7 +106,6 @@
 DECLARE_EXPORT(__movstr);
 #endif
 
-#ifdef CONFIG_CPU_SH4
 #if __GNUC__ == 4
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
@@ -126,7 +125,6 @@
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
 #endif /* __GNUC__ == 4 */
-#endif
 
 #if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
 	defined(CONFIG_SH7705_CACHE_32KB))
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index e23dd1a..9dc7b69 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -9,3 +9,5 @@
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
 lib-y	+= $(memcpy-y)
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index cf446bb..1265f20 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -17,7 +17,7 @@
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
-	select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2
+	select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
 
 config CPU_SH4A
@@ -29,10 +29,6 @@
 	select CPU_SH4A
 	select CPU_HAS_DSP
 
-config CPU_SUBTYPE_ST40
-	bool
-	select CPU_SH4
-
 config CPU_SHX2
 	bool
 
@@ -152,21 +148,6 @@
 	bool "Support SH4-202 processor"
 	select CPU_SH4
 
-# ST40 Processor Support
-
-config CPU_SUBTYPE_ST40STB1
-	bool "Support ST40STB1/ST40RA processors"
-	select CPU_SUBTYPE_ST40
-	help
-	  Select ST40STB1 if you have a ST40RA CPU.
-	  This was previously called the ST40STB1, hence the option name.
-
-config CPU_SUBTYPE_ST40GX1
-	bool "Support ST40GX1 processor"
-	select CPU_SUBTYPE_ST40
-	help
-	  Select ST40GX1 if you have a ST40GX1 CPU.
-
 # SH-4A Processor Support
 
 config CPU_SUBTYPE_SH7770
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index ee30fb4..aa44607 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -33,3 +33,5 @@
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_32BIT)		+= pmb.o
 obj-$(CONFIG_NUMA)		+= numa.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S
index 8a70613..7a7c81e 100644
--- a/arch/sh/mm/clear_page.S
+++ b/arch/sh/mm/clear_page.S
@@ -150,48 +150,3 @@
 	.long	8b, .Lbad_clear_user
 	.long	9b, .Lbad_clear_user
 .previous
-
-#if defined(CONFIG_CPU_SH4)
-/*
- * __clear_user_page
- * @to: P3 address (with same color)
- * @orig_to: P1 address
- *
- * void __clear_user_page(void *to, void *orig_to)
- */
-
-/*
- * r0 --- scratch 
- * r4 --- to
- * r5 --- orig_to
- * r6 --- to + PAGE_SIZE
- */
-ENTRY(__clear_user_page)
-	mov.l	.Lpsz,r0
-	mov	r4,r6
-	add	r0,r6
-	mov	#0,r0
-	!
-1:	ocbi	@r5
-	add	#32,r5
-	movca.l	r0,@r4
-	mov	r4,r1
-	add	#32,r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	add	#28,r4
-	cmp/eq	r6,r4
-	bf/s	1b
-	 ocbwb	@r1
-	!
-	rts
-	 nop
-.Lpsz:	.long	PAGE_SIZE
-
-#endif
-
diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S
index 3d8409d..4068501 100644
--- a/arch/sh/mm/copy_page.S
+++ b/arch/sh/mm/copy_page.S
@@ -68,67 +68,6 @@
 	rts
 	 nop
 
-#if defined(CONFIG_CPU_SH4)
-/*
- * __copy_user_page
- * @to: P1 address (with same color)
- * @from: P1 address
- * @orig_to: P1 address
- *
- * void __copy_user_page(void *to, void *from, void *orig_to)
- */
-
-/*
- * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch 
- * r8 --- from + PAGE_SIZE
- * r9 --- orig_to
- * r10 --- to
- * r11 --- from
- */
-ENTRY(__copy_user_page)
-	mov.l	r8,@-r15
-	mov.l	r9,@-r15
-	mov.l	r10,@-r15
-	mov.l	r11,@-r15
-	mov	r4,r10
-	mov	r5,r11
-	mov	r6,r9
-	mov	r5,r8
-	mov.l	.Lpsz,r0
-	add	r0,r8
-	!
-1:	ocbi	@r9
-	add	#32,r9
-	mov.l	@r11+,r0
-	mov.l	@r11+,r1
-	mov.l	@r11+,r2
-	mov.l	@r11+,r3
-	mov.l	@r11+,r4
-	mov.l	@r11+,r5
-	mov.l	@r11+,r6
-	mov.l	@r11+,r7
-	movca.l	r0,@r10
-	mov	r10,r0
-	add	#32,r10
-	mov.l	r7,@-r10
-	mov.l	r6,@-r10
-	mov.l	r5,@-r10
-	mov.l	r4,@-r10
-	mov.l	r3,@-r10
-	mov.l	r2,@-r10
-	mov.l	r1,@-r10
-	ocbwb	@r0
-	cmp/eq	r11,r8
-	bf/s	1b
-	 add	#28,r10
-	!
-	mov.l	@r15+,r11
-	mov.l	@r15+,r10
-	mov.l	@r15+,r9
-	mov.l	@r15+,r8
-	rts
-	 nop
-#endif
 	.align 2
 .Lpsz:	.long	PAGE_SIZE
 /*
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 25f5c6f..8c7a9ca 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -9,6 +9,8 @@
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
@@ -50,35 +52,62 @@
 void clear_user_page(void *to, unsigned long address, struct page *page)
 {
 	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
-		clear_page(to);
-	else {
-		void *vto = kmap_coherent(page, address);
-		__clear_user_page(vto, to);
-		kunmap_coherent(vto);
-	}
+
+	clear_page(to);
+	if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS))
+		__flush_wback_region(to, PAGE_SIZE);
 }
 
-/*
- * copy_user_page
- * @to: P1 address
- * @from: P1 address
- * @address: U0 address to be mapped
- * @page: page (virt_to_page(to))
- */
-void copy_user_page(void *to, void *from, unsigned long address,
-		    struct page *page)
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
 {
+	void *vto;
+
 	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
-		copy_page(to, from);
-	else {
-		void *vfrom = kmap_coherent(page, address);
-		__copy_user_page(vfrom, from, to);
-		kunmap_coherent(vfrom);
-	}
+
+	vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+	memcpy(vto, src, len);
+	kunmap_coherent(vto);
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_cache_page(vma, vaddr, page_to_pfn(page));
 }
 
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	void *vfrom;
+
+	__set_bit(PG_mapped, &page->flags);
+
+	vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+	memcpy(dst, vfrom, len);
+	kunmap_coherent(vfrom);
+}
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	void *vfrom, *vto;
+
+	__set_bit(PG_mapped, &to->flags);
+
+	vto = kmap_atomic(to, KM_USER1);
+	vfrom = kmap_coherent(from, vaddr);
+	copy_page(vto, vfrom);
+	kunmap_coherent(vfrom);
+
+	if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS))
+		__flush_wback_region(vto, PAGE_SIZE);
+
+	kunmap_atomic(vto, KM_USER1);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+EXPORT_SYMBOL(copy_user_highpage);
+
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 1f25d9b..2efc2e7 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -15,3 +15,4 @@
 
 oprofile-y				:= $(DRIVER_OBJS) $(profdrvr-y)
 
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c
index ceb9458..0761af4 100644
--- a/arch/sh64/kernel/process.c
+++ b/arch/sh64/kernel/process.c
@@ -26,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/proc_fs.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 
@@ -656,9 +657,6 @@
    */
 
 #if defined(CONFIG_SH64_PROC_ASIDS)
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-
 static int
 asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data)
 {
@@ -686,10 +684,8 @@
 
 static int __init register_proc_asids(void)
 {
-  create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL);
-  return 0;
+	create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL);
+	return 0;
 }
-
 __initcall(register_proc_asids);
 #endif
-
diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c
index c03101f..f32df38 100644
--- a/arch/sh64/kernel/traps.c
+++ b/arch/sh64/kernel/traps.c
@@ -30,7 +30,6 @@
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
 #include <linux/module.h>
-
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -242,9 +241,6 @@
 
 #endif /* CONFIG_SH64_ID2815_WORKAROUND */
 
-
-#include <asm/system.h>
-
 /* Called with interrupts disabled */
 asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
 {
@@ -984,4 +980,3 @@
 	/* Clear all DEBUGINT causes */
 	poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
 }
-
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index e1e24f3..01a6756 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -18,7 +18,6 @@
 #include <linux/linkage.h>
 #include <linux/kernel_stat.h>
 #include <linux/signal.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/random.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index 9f472a7..eeb5a2f 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -6,7 +6,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c
index 5798715..158484b 100644
--- a/arch/sparc64/kernel/module.c
+++ b/arch/sparc64/kernel/module.c
@@ -11,7 +11,6 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/slab.h>
-#include <linux/vmalloc.h>
 #include <linux/mm.h>
 
 #include <asm/processor.h>
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 78caff9..98c4688 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -51,7 +51,6 @@
 #include <linux/vfs.h>
 #include <linux/netfilter_ipv4/ip_tables.h>
 #include <linux/ptrace.h>
-#include <linux/highuid.h>
 
 #include <asm/types.h>
 #include <asm/uaccess.h>
diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c
index 170d6ca..cfc22d3 100644
--- a/arch/sparc64/kernel/sys_sunos32.c
+++ b/arch/sparc64/kernel/sys_sunos32.c
@@ -57,7 +57,6 @@
 #include <linux/personality.h>
 
 /* For SOCKET_I */
-#include <linux/socket.h>
 #include <net/sock.h>
 #include <net/compat.h>
 
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index a2cf955..4352ee4 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -28,7 +28,6 @@
 #include <linux/jiffies.h>
 #include <linux/cpufreq.h>
 #include <linux/percpu.h>
-#include <linux/profile.h>
 #include <linux/miscdevice.h>
 #include <linux/rtc.h>
 #include <linux/kernel_stat.h>
@@ -47,7 +46,6 @@
 #include <asm/sections.h>
 #include <asm/cpudata.h>
 #include <asm/uaccess.h>
-#include <asm/prom.h>
 #include <asm/irq_regs.h>
 
 DEFINE_SPINLOCK(mostek_lock);
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 82c2ac4..31999bc 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -70,9 +70,12 @@
 # in KBUILD_CFLAGS.  Otherwise, it would cause ld to complain about the two different
 # errnos.
 # These apply to kernelspace only.
+#
+# strip leading and trailing whitespace to make the USER_CFLAGS removal of these
+# defines more robust
 
-KERNEL_DEFINES = -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
-	-Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES)
+KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
+			 -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
 KBUILD_CFLAGS += $(KERNEL_DEFINES)
 KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
 
@@ -165,7 +168,7 @@
 	$(Q)mkdir -p $(objtree)/include/asm-um
 	$(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch
 else
-	$(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(HEADER_ARCH) arch
+	$(Q)cd $(TOPDIR)/include/asm-um && ln -fsn ../asm-$(SUBARCH) arch
 endif
 
 $(objtree)/$(ARCH_DIR)/include:
@@ -177,7 +180,7 @@
 ifneq ($(KBUILD_SRC),)
 	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
 else
-	$(Q)cd $(ARCH_DIR)/include && ln -sf sysdep-$(SUBARCH) sysdep
+	$(Q)cd $(ARCH_DIR)/include && ln -fsn sysdep-$(SUBARCH) sysdep
 endif
 
 $(ARCH_DIR)/os:
@@ -185,7 +188,7 @@
 ifneq ($(KBUILD_SRC),)
 	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/os-$(OS) $(ARCH_DIR)/os
 else
-	$(Q)cd $(ARCH_DIR) && ln -sf os-$(OS) os
+	$(Q)cd $(ARCH_DIR) && ln -fsn os-$(OS) os
 endif
 
 # Generated files
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index b01dfb0..6729011 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -22,8 +22,8 @@
 endif
 endif
 
-CFLAGS			+= -DCONFIG_X86_32
-AFLAGS			+= -DCONFIG_X86_32
+KBUILD_CFLAGS		+= -DCONFIG_X86_32
+KBUILD_AFLAGS		+= -DCONFIG_X86_32
 CONFIG_X86_32		:= y
 export CONFIG_X86_32
 
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 8c01fa8..73681f1 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -753,6 +753,7 @@
 	.remove		= net_remove,
 };
 
+#ifdef CONFIG_INET
 static int uml_inetaddr_event(struct notifier_block *this, unsigned long event,
 			      void *ptr)
 {
@@ -789,14 +790,13 @@
 	.notifier_call		= uml_inetaddr_event,
 };
 
-static int uml_net_init(void)
+static void inet_register(void)
 {
 	struct list_head *ele;
 	struct uml_net_private *lp;
 	struct in_device *ip;
 	struct in_ifaddr *in;
 
-	mconsole_register_dev(&net_mc);
 	register_inetaddr_notifier(&uml_inetaddr_notifier);
 
 	/* Devices may have been opened already, so the uml_inetaddr_notifier
@@ -816,7 +816,17 @@
 		}
 	}
 	spin_unlock(&opened_lock);
+}
+#else
+static inline void inet_register(void)
+{
+}
+#endif
 
+static int uml_net_init(void)
+{
+	mconsole_register_dev(&net_mc);
+	inet_register();
 	return 0;
 }
 
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index e184b44..7e6cdde 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -705,7 +705,7 @@
 	ubd_dev->size = ROUND_BLOCK(ubd_dev->size);
 
 	INIT_LIST_HEAD(&ubd_dev->restart);
-	sg_init_table(&ubd_dev->sg, MAX_SG);
+	sg_init_table(ubd_dev->sg, MAX_SG);
 
 	err = -ENOMEM;
 	ubd_dev->queue = blk_init_queue(do_ubd_request, &ubd_dev->lock);
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
index 99033ff..1723fac 100644
--- a/arch/um/include/user.h
+++ b/arch/um/include/user.h
@@ -1,11 +1,13 @@
 /* 
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
 #ifndef __USER_H__
 #define __USER_H__
 
+#include "uml-config.h"
+
 /*
  * The usual definition - copied here because the kernel provides its own,
  * fancier, type-safe, definition.  Using that one would require
@@ -23,8 +25,17 @@
 
 extern void panic(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
+
+#ifdef UML_CONFIG_PRINTK
 extern int printk(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
+#else
+static inline int printk(const char *fmt, ...)
+{
+	return 0;
+}
+#endif
+
 extern void schedule(void);
 extern int in_aton(char *str);
 extern int open_gdb_chan(void);
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 70c2d62..ba11ccd 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -347,14 +347,15 @@
 {
 	int err;
 
-	err = request_irq(irq, handler, irqflags, devname, dev_id);
-	if (err)
-		return err;
-
-	if (fd != -1)
+	if (fd != -1) {
 		err = activate_fd(irq, fd, type, dev_id);
-	return err;
+		if (err)
+			return err;
+	}
+
+	return request_irq(irq, handler, irqflags, devname, dev_id);
 }
+
 EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
 
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index d119f4f..8d07a7a 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -3,7 +3,6 @@
 #include <sys/mman.h>
 #include <sys/time.h>
 #include <asm/unistd.h>
-#include <asm/page.h>
 #include "as-layout.h"
 #include "ptrace_user.h"
 #include "skas.h"
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index b542a3a..f834627 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -496,8 +496,7 @@
 	n = recvmsg(fd, &msg, 0);
 	if(n < 0)
 		return -errno;
-
-	else if(n != sizeof(iov.iov_len))
+	else if(n != iov.iov_len)
 		*helper_pid_out = -1;
 
 	cmsg = CMSG_FIRSTHDR(&msg);
diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig
similarity index 74%
rename from arch/x86/Kconfig.i386
rename to arch/x86/Kconfig
index 7331efe..368864d 100644
--- a/arch/x86/Kconfig.i386
+++ b/arch/x86/Kconfig
@@ -1,18 +1,24 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
+# x86 configuration
+mainmenu "Linux Kernel Configuration for x86"
 
-mainmenu "Linux Kernel Configuration"
+# Select 32 or 64 bit
+config 64BIT
+	bool "64-bit kernel" if ARCH = "x86"
+	default ARCH = "x86_64"
+	help
+	  Say yes to build a 64-bit kernel - formerly known as x86_64
+	  Say no to build a 32-bit kernel - formerly known as i386
 
 config X86_32
+	def_bool !64BIT
+
+config X86_64
+	def_bool 64BIT
+
+### Arch settings
+config X86
 	bool
 	default y
-	help
-	  This is Linux's home port.  Linux was originally native to the Intel
-	  386, and runs on all the later x86 processors including the Intel
-	  486, 586, Pentiums, and various instruction-set-compatible chips by
-	  AMD, Cyrix, and others.
 
 config GENERIC_TIME
 	bool
@@ -33,7 +39,7 @@
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	default y
-	depends on X86_LOCAL_APIC
+	depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
 
 config LOCKDEP_SUPPORT
 	bool
@@ -47,10 +53,6 @@
 	bool
 	default y
 
-config X86
-	bool
-	default y
-
 config MMU
 	bool
 	default y
@@ -61,7 +63,7 @@
 
 config QUICKLIST
 	bool
-	default y
+	default X86_32
 
 config SBUS
 	bool
@@ -91,6 +93,76 @@
 	bool
 	default y
 
+config RWSEM_GENERIC_SPINLOCK
+	def_bool !X86_XADD
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool X86_XADD
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_TIME_VSYSCALL
+	bool
+	default X86_64
+
+
+
+
+
+config ZONE_DMA32
+	bool
+	default X86_64
+
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
+config AUDIT_ARCH
+	bool
+	default X86_64
+
+# Use the generic interrupt handling code in kernel/irq/:
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+config GENERIC_PENDING_IRQ
+	bool
+	depends on GENERIC_HARDIRQS && SMP
+	default y
+
+config X86_SMP
+	bool
+	depends on X86_32 && SMP && !X86_VOYAGER
+	default y
+
+config X86_HT
+	bool
+	depends on SMP && !(X86_VISWS || X86_VOYAGER || MK8)
+	default y
+
+config X86_BIOS_REBOOT
+	bool
+	depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
+	default y
+
+config X86_TRAMPOLINE
+	bool
+	depends on X86_SMP || (X86_VOYAGER && SMP)
+	default y
+
+config KTIME_SCALAR
+	def_bool X86_32
 source "init/Kconfig"
 
 menu "Processor type and features"
@@ -137,6 +209,7 @@
 
 config X86_ELAN
 	bool "AMD Elan"
+	depends on X86_32
 	help
 	  Select this for an AMD Elan processor.
 
@@ -146,6 +219,7 @@
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
+	depends on X86_32
 	select SMP if !BROKEN
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
@@ -160,6 +234,7 @@
 	bool "NUMAQ (IBM/Sequent)"
 	select SMP
 	select NUMA
+	depends on X86_32
 	help
 	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
 	  multiquad box. This changes the way that processors are bootstrapped,
@@ -169,7 +244,7 @@
 
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
-	depends on SMP
+	depends on X86_32 && SMP
 	help
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
@@ -179,7 +254,7 @@
 
 config X86_BIGSMP
 	bool "Support for other sub-arch SMP systems with more than 8 CPUs"
-	depends on SMP
+	depends on X86_32 && SMP
 	help
 	  This option is needed for the systems that have more than 8 CPUs
 	  and if the system is not of any sub-arch type above.
@@ -188,6 +263,7 @@
 
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
+	depends on X86_32
 	help
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
@@ -199,6 +275,7 @@
 
 config X86_GENERICARCH
        bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+	depends on X86_32
        help
           This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
 	  It is intended for a generic binary kernel.
@@ -206,18 +283,27 @@
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
-	depends on SMP
+	depends on X86_32 && SMP
 	help
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 	  Only choose this option if you have such a system, otherwise you
 	  should say N here.
 
+config X86_VSMP
+	bool "Support for ScaleMP vSMP"
+	depends on X86_64 && PCI
+	 help
+	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
+	  supposed to run on these EM64T-based machines.  Only choose this option
+	  if you have one of these machines.
+
 endchoice
 
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	bool "Single-depth WCHAN output"
 	default y
+	depends on X86_32
 	help
 	  Calculate simpler /proc/<PID>/wchan values. If this option
 	  is disabled then wchan values will recurse back to the
@@ -228,7 +314,7 @@
 
 config PARAVIRT
 	bool
-	depends on !(X86_VISWS || X86_VOYAGER)
+	depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
 	help
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
@@ -237,6 +323,7 @@
 
 menuconfig PARAVIRT_GUEST
 	bool "Paravirtualized guest support"
+	depends on X86_32
 	help
 	  Say Y here to get to see options related to running Linux under
 	  various hypervisors.  This option alone does not add any kernel code.
@@ -264,7 +351,7 @@
 config ACPI_SRAT
 	bool
 	default y
-	depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
 	select ACPI_NUMA
 
 config HAVE_ARCH_PARSE_SRAT
@@ -275,12 +362,12 @@
 config X86_SUMMIT_NUMA
 	bool
 	default y
-	depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
 
 config X86_CYCLONE_TIMER
 	bool
 	default y
-	depends on X86_SUMMIT || X86_GENERICARCH
+	depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
 	bool
@@ -290,21 +377,89 @@
 source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
-	bool "HPET Timer Support"
+	bool
+	prompt "HPET Timer Support" if X86_32
+	default X86_64
 	help
-	  This enables the use of the HPET for the kernel's internal timer.
-	  HPET is the next generation timer replacing legacy 8254s.
-	  You can safely choose Y here.  However, HPET will only be
-	  activated if the platform and the BIOS support this feature.
-	  Otherwise the 8254 will be used for timing services.
+         Use the IA-PC HPET (High Precision Event Timer) to manage
+         time in preference to the PIT and RTC, if a HPET is
+         present.
+         HPET is the next generation timer replacing legacy 8254s.
+         The HPET provides a stable time base on SMP
+         systems, unlike the TSC, but it is more expensive to access,
+         as it is off-chip.  You can find the HPET spec at
+         <http://www.intel.com/hardwaredesign/hpetspec.htm>.
 
-	  Choose N to continue using the legacy 8254 timer.
+         You can safely choose Y here.  However, HPET will only be
+         activated if the platform and the BIOS support this feature.
+         Otherwise the 8254 will be used for timing services.
+
+         Choose N to continue using the legacy 8254 timer.
 
 config HPET_EMULATE_RTC
 	bool
 	depends on HPET_TIMER && RTC=y
 	default y
 
+# Mark as embedded because too many people got it wrong.
+# The code disables itself when not needed.
+config GART_IOMMU
+	bool "GART IOMMU support" if EMBEDDED
+	default y
+	select SWIOTLB
+	select AGP
+	depends on X86_64 && PCI
+	help
+	  Support for full DMA access of devices with 32bit memory access only
+	  on systems with more than 3GB. This is usually needed for USB,
+	  sound, many IDE/SATA chipsets and some other devices.
+	  Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
+	  based hardware IOMMU and a software bounce buffer based IOMMU used
+	  on Intel systems and as fallback.
+	  The code is only active when needed (enough memory and limited
+	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
+	  too.
+
+config CALGARY_IOMMU
+	bool "IBM Calgary IOMMU support"
+	select SWIOTLB
+	depends on X86_64 && PCI && EXPERIMENTAL
+	help
+	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
+	  systems. Needed to run systems with more than 3GB of memory
+	  properly with 32-bit PCI devices that do not support DAC
+	  (Double Address Cycle). Calgary also supports bus level
+	  isolation, where all DMAs pass through the IOMMU.  This
+	  prevents them from going anywhere except their intended
+	  destination. This catches hard-to-find kernel bugs and
+	  mis-behaving drivers and devices that do not use the DMA-API
+	  properly to set up their DMA buffers.  The IOMMU can be
+	  turned off at boot time with the iommu=off parameter.
+	  Normally the kernel will make the right choice by itself.
+	  If unsure, say Y.
+
+config CALGARY_IOMMU_ENABLED_BY_DEFAULT
+	bool "Should Calgary be enabled by default?"
+	default y
+	depends on CALGARY_IOMMU
+	help
+	  Should Calgary be enabled by default? if you choose 'y', Calgary
+	  will be used (if it exists). If you choose 'n', Calgary will not be
+	  used even if it exists. If you choose 'n' and would like to use
+	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
+	  If unsure, say Y.
+
+# need this always selected by IOMMU for the VIA workaround
+config SWIOTLB
+	bool
+	help
+	  Support for software bounce buffers used on x86-64 systems
+	  which don't have a hardware IOMMU (e.g. the current generation
+	  of Intel's x86-64 CPUs). Using this PCI devices which can only
+	  access 32-bits of memory can be used on systems with more than
+	  3 GB of memory. If unsure, say Y.
+
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-255)"
 	range 2 255
@@ -321,7 +476,7 @@
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
-	depends on X86_HT
+	depends on (X86_64 && SMP) || (X86_32 && X86_HT)
 	help
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -330,7 +485,7 @@
 
 config SCHED_MC
 	bool "Multi-core scheduler support"
-	depends on X86_HT
+	depends on (X86_64 && SMP) || (X86_32 && X86_HT)
 	default y
 	help
 	  Multi-core scheduler support improves the CPU scheduler's decision
@@ -341,7 +496,7 @@
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+	depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -366,17 +521,17 @@
 
 config X86_LOCAL_APIC
 	bool
-	depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
+	depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
 	default y
 
 config X86_IO_APIC
 	bool
-	depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
+	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
 	default y
 
 config X86_VISWS_APIC
 	bool
-	depends on X86_VISWS
+	depends on X86_32 && X86_VISWS
 	default y
 
 config X86_MCE
@@ -396,9 +551,25 @@
 	  to disable it.  MCE support simply ignores non-MCE processors like
 	  the 386 and 486, so nearly everyone can say Y here.
 
+config X86_MCE_INTEL
+	bool "Intel MCE features"
+	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	default y
+	help
+	   Additional support for intel specific MCE features such as
+	   the thermal monitor.
+
+config X86_MCE_AMD
+	bool "AMD MCE features"
+	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+	default y
+	help
+	   Additional support for AMD specific MCE features such as
+	   the DRAM Error Threshold.
+
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_MCE
+	depends on X86_32 && X86_MCE
 	help
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
@@ -411,14 +582,15 @@
 
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
-	depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
 	help
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
 config VM86
-	default y
 	bool "Enable VM86 support" if EMBEDDED
+	default y
+	depends on X86_32
 	help
           This option is required by programs like DOSEMU to run 16-bit legacy
 	  code on X86 processors. It also may be needed by software like
@@ -427,6 +599,7 @@
 
 config TOSHIBA
 	tristate "Toshiba Laptop support"
+	depends on X86_32
 	---help---
 	  This adds a driver to safely access the System Management Mode of
 	  the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
@@ -442,6 +615,7 @@
 
 config I8K
 	tristate "Dell laptop support"
+	depends on X86_32
 	---help---
 	  This adds a driver to safely access the System Management Mode
 	  of the CPU on the Dell Inspiron 8000. The System Management Mode
@@ -462,7 +636,7 @@
 
 config X86_REBOOTFIXUPS
 	bool "Enable X86 board specific fixups for reboot"
-	depends on X86
+	depends on X86_32 && X86
 	default n
 	---help---
 	  This enables chipset and/or board specific fixups to be done
@@ -517,12 +691,11 @@
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
-source "drivers/firmware/Kconfig"
-
 choice
 	prompt "High Memory Support"
 	default HIGHMEM4G if !X86_NUMAQ
 	default HIGHMEM64G if X86_NUMAQ
+	depends on X86_32
 
 config NOHIGHMEM
 	bool "off"
@@ -582,6 +755,7 @@
 	depends on EXPERIMENTAL
 	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
+	depends on X86_32
 	help
 	  Select the desired split between kernel and user memory.
 
@@ -619,16 +793,17 @@
 	default 0x78000000 if VMSPLIT_2G_OPT
 	default 0x40000000 if VMSPLIT_1G
 	default 0xC0000000
+	depends on X86_32
 
 config HIGHMEM
 	bool
-	depends on HIGHMEM64G || HIGHMEM4G
+	depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
 	default y
 
 config X86_PAE
 	bool "PAE (Physical Address Extension) Support"
 	default n
-	depends on !HIGHMEM4G
+	depends on X86_32 && !HIGHMEM4G
 	select RESOURCES_64BIT
 	help
 	  PAE is required for NX support, and furthermore enables
@@ -639,46 +814,82 @@
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
-	depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL
+	depends on SMP
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
 	default n if X86_PC
 	default y if (X86_NUMAQ || X86_SUMMIT)
 	help
-	  NUMA support for i386. This is currently highly experimental
-	  and should be only used for kernel development. It might also
-	  cause boot failures.
+	  Enable NUMA (Non Uniform Memory Access) support.
+	  The kernel will try to allocate memory used by a CPU on the
+	  local memory controller of the CPU and add some more
+	  NUMA awareness to the kernel.
+
+	  For i386 this is currently highly experimental and should be only
+	  used for kernel development. It might also cause boot failures.
+	  For x86_64 this is recommended on all multiprocessor Opteron systems.
+	  If the system is EM64T, you should say N unless your system is
+	  EM64T NUMA.
 
 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
-	depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+	depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+
+config K8_NUMA
+       bool "Old style AMD Opteron NUMA detection"
+       depends on X86_64 && NUMA && PCI
+       default y
+       help
+	 Enable K8 NUMA node topology detection.  You should say Y here if
+	 you have a multi processor AMD K8 system. This uses an old
+	 method to read the NUMA configuration directly from the builtin
+	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+	 instead, which also takes priority if both are compiled in.
+
+config X86_64_ACPI_NUMA
+	bool "ACPI NUMA detection"
+	depends on X86_64 && NUMA && ACPI && PCI
+	select ACPI_NUMA
+	default y
+	help
+	  Enable ACPI SRAT based node topology detection.
+
+config NUMA_EMU
+	bool "NUMA emulation"
+	depends on X86_64 && NUMA
+	help
+	  Enable NUMA emulation. A flat machine will be split
+	  into virtual nodes when booted with "numa=fake=N", where N is the
+	  number of nodes. This is only useful for debugging.
 
 config NODES_SHIFT
 	int
+	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
 
 config HAVE_ARCH_BOOTMEM_NODE
 	bool
-	depends on NUMA
+	depends on X86_32 && NUMA
 	default y
 
 config ARCH_HAVE_MEMORY_PRESENT
 	bool
-	depends on DISCONTIGMEM
+	depends on X86_32 && DISCONTIGMEM
 	default y
 
 config NEED_NODE_MEMMAP_SIZE
 	bool
-	depends on DISCONTIGMEM || SPARSEMEM
+	depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
 	default y
 
 config HAVE_ARCH_ALLOC_REMAP
 	bool
-	depends on NUMA
+	depends on X86_32 && NUMA
 	default y
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
+	depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA)
 
 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
@@ -690,21 +901,23 @@
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on (NUMA || (X86_PC && EXPERIMENTAL))
-	select SPARSEMEM_STATIC
+	depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64))
+	select SPARSEMEM_STATIC if X86_32
+	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
-	depends on ARCH_SPARSEMEM_ENABLE
+	depends on X86_32 && ARCH_SPARSEMEM_ENABLE
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
+config ARCH_MEMORY_PROBE
+	def_bool X86_64
+	depends on MEMORY_HOTPLUG
 
 source "mm/Kconfig"
 
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
-	depends on HIGHMEM4G || HIGHMEM64G
+	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
 	help
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
@@ -712,7 +925,8 @@
 	  entries in high memory.
 
 config MATH_EMULATION
-	bool "Math emulation"
+	bool
+	prompt "Math emulation" if X86_32
 	---help---
 	  Linux can emulate a math coprocessor (used for floating point
 	  operations) if you don't have one. 486DX and Pentium processors have
@@ -772,7 +986,7 @@
 
 config EFI
 	bool "Boot from EFI support"
-	depends on ACPI
+	depends on X86_32 && ACPI
 	default n
 	---help---
 	This enables the kernel to boot on EFI platforms using
@@ -789,18 +1003,18 @@
 	kernel should continue to boot on existing non-EFI platforms.
 
 config IRQBALANCE
- 	bool "Enable kernel irq balancing"
-	depends on SMP && X86_IO_APIC
+	bool "Enable kernel irq balancing"
+	depends on X86_32 && SMP && X86_IO_APIC
 	default y
 	help
- 	  The default yes will allow the kernel to do irq load balancing.
+	  The default yes will allow the kernel to do irq load balancing.
 	  Saying no will keep the kernel from doing irq load balancing.
 
 # turning this on wastes a bunch of space.
 # Summit needs it only when NUMA is on
 config BOOT_IOREMAP
 	bool
-	depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
+	depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
 	default y
 
 config SECCOMP
@@ -820,6 +1034,30 @@
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	depends on X86_64 && EXPERIMENTAL
+	help
+         This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of critical functions, a canary
+	  value on the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+
+	  This feature requires gcc version 4.2 or above, or a distribution
+	  gcc with the feature backported. Older versions are automatically
+	  detected and for those versions, this configuration option is ignored.
+
+config CC_STACKPROTECTOR_ALL
+	bool "Use stack-protector for all functions"
+	depends on CC_STACKPROTECTOR
+	help
+	  Normally, GCC only inserts the canary value protection for
+	  functions that use large-ish on-stack buffers. By enabling
+	  this option, GCC will be asked to do this for ALL functions.
+
 source kernel/Kconfig.hz
 
 config KEXEC
@@ -841,7 +1079,7 @@
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on HIGHMEM
+	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
@@ -856,6 +1094,7 @@
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
+	default "0x200000" if X86_64
 	default "0x100000"
 	help
 	  This gives the physical address where the kernel is loaded.
@@ -908,25 +1147,31 @@
 	  must live at a different physical address than the primary
 	  kernel.
 
+	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
+	  it has been loaded at and the compile time physical address
+	  (CONFIG_PHYSICAL_START) is ignored.
+
 config PHYSICAL_ALIGN
-	hex "Alignment value to which kernel should be aligned"
-	default "0x100000"
+	hex
+	prompt "Alignment value to which kernel should be aligned" if X86_32
+	default "0x100000" if X86_32
+	default "0x200000" if X86_64
 	range 0x2000 0x400000
 	help
 	  This value puts the alignment restrictions on physical address
- 	  where kernel is loaded and run from. Kernel is compiled for an
- 	  address which meets above alignment restriction.
+	  where kernel is loaded and run from. Kernel is compiled for an
+	  address which meets above alignment restriction.
 
- 	  If bootloader loads the kernel at a non-aligned address and
- 	  CONFIG_RELOCATABLE is set, kernel will move itself to nearest
- 	  address aligned to above value and run from there.
+	  If bootloader loads the kernel at a non-aligned address and
+	  CONFIG_RELOCATABLE is set, kernel will move itself to nearest
+	  address aligned to above value and run from there.
 
- 	  If bootloader loads the kernel at a non-aligned address and
- 	  CONFIG_RELOCATABLE is not set, kernel will ignore the run time
- 	  load address and decompress itself to the address it has been
- 	  compiled for and run from there. The address for which kernel is
- 	  compiled already meets above alignment restrictions. Hence the
- 	  end result is that kernel runs from a physical address meeting
+	  If bootloader loads the kernel at a non-aligned address and
+	  CONFIG_RELOCATABLE is not set, kernel will ignore the run time
+	  load address and decompress itself to the address it has been
+	  compiled for and run from there. The address for which kernel is
+	  compiled already meets above alignment restrictions. Hence the
+	  end result is that kernel runs from a physical address meeting
 	  above alignment restrictions.
 
 	  Don't change this unless you know what you are doing.
@@ -938,10 +1183,13 @@
 	  Say Y here to experiment with turning CPUs off and on, and to
 	  enable suspend on SMP systems. CPUs can be controlled through
 	  /sys/devices/system/cpu.
+	  Say N if you want to disable CPU hotplug and don't need to
+	  suspend.
 
 config COMPAT_VDSO
 	bool "Compat VDSO support"
 	default y
+	depends on X86_32
 	help
 	  Map the VDSO to the predictable old-style address too.
 	---help---
@@ -955,18 +1203,35 @@
 
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
-	depends on HIGHMEM
+	depends on X86_64 || (X86_32 && HIGHMEM)
 
-menu "Power management options (ACPI, APM)"
+config MEMORY_HOTPLUG_RESERVE
+	def_bool X86_64
+	depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+	def_bool X86_64
+	depends on NUMA
+
+config OUT_OF_LINE_PFN_TO_PAGE
+	def_bool X86_64
+	depends on DISCONTIGMEM
+
+menu "Power management options"
 	depends on !X86_VOYAGER
 
-source kernel/power/Kconfig
+config ARCH_HIBERNATION_HEADER
+	bool
+	depends on X86_64 && HIBERNATION
+	default y
+
+source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
 menuconfig APM
 	tristate "APM (Advanced Power Management) BIOS support"
-	depends on PM_SLEEP && !X86_VISWS
+	depends on X86_32 && PM_SLEEP && !X86_VISWS
 	---help---
 	  APM is a BIOS specification for saving power using several different
 	  techniques. This is mostly useful for battery powered laptops with
@@ -1092,13 +1357,14 @@
 
 endif # APM
 
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_32"
+source "arch/x86/kernel/cpu/cpufreq/Kconfig"
 
 source "drivers/cpuidle/Kconfig"
 
 endmenu
 
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+menu "Bus options (PCI etc.)"
 
 config PCI
 	bool "PCI support" if !X86_VISWS
@@ -1118,7 +1384,7 @@
 
 choice
 	prompt "PCI access mode"
-	depends on PCI && !X86_VISWS
+	depends on X86_32 && PCI && !X86_VISWS
 	default PCI_GOANY
 	---help---
 	  On PCI systems, the BIOS can be used to detect the PCI devices and
@@ -1151,17 +1417,18 @@
 
 config PCI_BIOS
 	bool
-	depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
+	depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
 	default y
 
+# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
 config PCI_DIRECT
 	bool
- 	depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
+	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
 	default y
 
 config PCI_MMCONFIG
 	bool
-	depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+	depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
 	default y
 
 config PCI_DOMAINS
@@ -1169,14 +1436,52 @@
 	depends on PCI
 	default y
 
+config PCI_MMCONFIG
+	bool "Support mmconfig PCI config space access"
+	depends on X86_64 && PCI && ACPI
+
+config DMAR
+	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
+	help
+	  DMA remapping (DMAR) devices support enables independent address
+	  translations for Direct Memory Access (DMA) from devices.
+	  These DMA remapping devices are reported via ACPI tables
+	  and include PCI device scope covered by these DMA
+	  remapping devices.
+
+config DMAR_GFX_WA
+	bool "Support for Graphics workaround"
+	depends on DMAR
+	default y
+	help
+	 Current Graphics drivers tend to use physical address
+	 for DMA and avoid using DMA APIs. Setting this config
+	 option permits the IOMMU driver to set a unity map for
+	 all the OS-visible memory. Hence the driver can continue
+	 to use physical addresses for DMA.
+
+config DMAR_FLOPPY_WA
+	bool
+	depends on DMAR
+	default y
+	help
+	 Floppy disk drivers are know to bypass DMA API calls
+	 thereby failing to work when IOMMU is enabled. This
+	 workaround will setup a 1:1 mapping for the first
+	 16M to make floppy (an ISA device) work.
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
 
+# x86_64 have no ISA slots, but do have ISA-style DMA.
 config ISA_DMA_API
 	bool
 	default y
 
+if X86_32
+
 config ISA
 	bool "ISA support"
 	depends on !(X86_VOYAGER || X86_VISWS)
@@ -1248,9 +1553,11 @@
 	  MFGPTs have a better resolution and max interval than the
 	  generic PIT, and are suitable for use as high-res timers.
 
+endif # X86_32
+
 config K8_NB
 	def_bool y
-	depends on AGP_AMD64
+	depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
 
 source "drivers/pcmcia/Kconfig"
 
@@ -1258,16 +1565,48 @@
 
 endmenu
 
-menu "Executable file formats"
+
+menu "Executable file formats / Emulations"
 
 source "fs/Kconfig.binfmt"
 
+config IA32_EMULATION
+	bool "IA32 Emulation"
+	depends on X86_64
+	help
+	  Include code to run 32-bit programs under a 64-bit kernel. You should
+	  likely turn this on, unless you're 100% sure that you don't have any
+	  32-bit programs left.
+
+config IA32_AOUT
+       tristate "IA32 a.out support"
+       depends on IA32_EMULATION
+       help
+         Support old a.out binaries in the 32bit emulation.
+
+config COMPAT
+	bool
+	depends on IA32_EMULATION
+	default y
+
+config COMPAT_FOR_U64_ALIGNMENT
+	def_bool COMPAT
+	depends on X86_64
+
+config SYSVIPC_COMPAT
+	bool
+	depends on X86_64 && COMPAT && SYSVIPC
+	default y
+
 endmenu
 
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "kernel/Kconfig.instrumentation"
@@ -1279,43 +1618,3 @@
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_PENDING_IRQ
-	bool
-	depends on GENERIC_HARDIRQS && SMP
-	default y
-
-config X86_SMP
-	bool
-	depends on SMP && !X86_VOYAGER
-	default y
-
-config X86_HT
-	bool
-	depends on SMP && !(X86_VISWS || X86_VOYAGER)
-	default y
-
-config X86_BIOS_REBOOT
-	bool
-	depends on !(X86_VISWS || X86_VOYAGER)
-	default y
-
-config X86_TRAMPOLINE
-	bool
-	depends on X86_SMP || (X86_VOYAGER && SMP)
-	default y
-
-config KTIME_SCALAR
-	bool
-	default y
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 0e2adad..c301622 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -3,11 +3,12 @@
 
 choice
 	prompt "Processor family"
-	default M686
+	default M686 if X86_32
+	default GENERIC_CPU if X86_64
 
 config M386
 	bool "386"
-	depends on !UML
+	depends on X86_32 && !UML
 	---help---
 	  This is the processor type of your CPU. This information is used for
 	  optimizing purposes. In order to compile a kernel that can run on
@@ -49,6 +50,7 @@
 
 config M486
 	bool "486"
+	depends on X86_32
 	help
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
@@ -57,6 +59,7 @@
 
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
+	depends on X86_32
 	help
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
@@ -64,18 +67,21 @@
 
 config M586TSC
 	bool "Pentium-Classic"
+	depends on X86_32
 	help
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
+	depends on X86_32
 	help
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
@@ -83,6 +89,7 @@
 
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
@@ -92,6 +99,7 @@
 
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
@@ -100,19 +108,14 @@
 
 config MPENTIUMM
 	bool "Pentium M"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
-config MCORE2
-	bool "Core 2/newer Xeon"
-	help
-	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-	  CPUs. You can distinguish newer from older Xeons by the CPU family
-	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
@@ -148,6 +151,7 @@
 
 config MK6
 	bool "K6/K6-II/K6-III"
+	depends on X86_32
 	help
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -155,6 +159,7 @@
 
 config MK7
 	bool "Athlon/Duron/K7"
+	depends on X86_32
 	help
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -169,6 +174,7 @@
 
 config MCRUSOE
 	bool "Crusoe"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
@@ -176,11 +182,13 @@
 
 config MEFFICEON
 	bool "Efficeon"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -188,6 +196,7 @@
 
 config MWINCHIP2
 	bool "Winchip-2"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -195,6 +204,7 @@
 
 config MWINCHIP3D
 	bool "Winchip-2A/Winchip-3"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -204,16 +214,19 @@
 
 config MGEODEGX1
 	bool "GeodeGX1"
+	depends on X86_32
 	help
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
        bool "Geode GX/LX"
+	depends on X86_32
        help
          Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
+	depends on X86_32
 	help
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
@@ -225,6 +238,7 @@
 
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
+	depends on X86_32
 	help
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
@@ -232,15 +246,42 @@
 
 config MVIAC7
 	bool "VIA C7"
+	depends on X86_32
 	help
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
+config MPSC
+	bool "Intel P4 / older Netburst based Xeon"
+	depends on X86_64
+	help
+	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
+	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
+          Netburst core and shouldn't use this option. You can distinguish them
+	  using the cpu family field
+	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+
+config MCORE2
+	bool "Core 2/newer Xeon"
+	help
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+	  CPUs. You can distinguish newer from older Xeons by the CPU family
+	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config GENERIC_CPU
+	bool "Generic-x86-64"
+	depends on X86_64
+	help
+	  Generic x86-64 CPU.
+	  Run equally well on all x86-64 CPUs.
+
 endchoice
 
 config X86_GENERIC
-       bool "Generic x86 support"
-       help
+	bool "Generic x86 support"
+	depends on X86_32
+	help
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -253,44 +294,31 @@
 
 #
 # Define implied options from the CPU selection here
-#
+config X86_L1_CACHE_BYTES
+	int
+	default "128" if GENERIC_CPU || MPSC
+	default "64" if MK8 || MCORE2
+	depends on X86_64
+
+config X86_INTERNODE_CACHE_BYTES
+	int
+	default "4096" if X86_VSMP
+	default X86_L1_CACHE_BYTES if !X86_VSMP
+	depends on X86_64
+
 config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
+	def_bool X86_64 || (X86_32 && !M386)
 
 config X86_L1_CACHE_SHIFT
 	int
-	default "7" if MPENTIUM4 || X86_GENERIC
+	default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
 
 config X86_XADD
 	bool
-	depends on !M386
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on !X86_XADD
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on X86_XADD
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
+	depends on X86_32 && !M386
 	default y
 
 config X86_PPRO_FENCE
@@ -305,22 +333,22 @@
 
 config X86_WP_WORKS_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_INVLPG
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_BSWAP
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_POPAD_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_ALIGNMENT_16
@@ -330,7 +358,7 @@
 
 config X86_GOOD_APIC
 	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
 	default y
 
 config X86_INTEL_USERCOPY
@@ -355,7 +383,7 @@
 
 config X86_TSC
 	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
 	default y
 
 # this should be set for all -march=.. options where the compiler
@@ -367,6 +395,7 @@
 
 config X86_MINIMUM_CPU_FAMILY
 	int
-	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+	default "64" if X86_64
+	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 
diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64
deleted file mode 100644
index cc468ea..0000000
--- a/arch/x86/Kconfig.x86_64
+++ /dev/null
@@ -1,839 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Note: ISA is disabled and will hopefully never be enabled.
-# If you managed to buy an ISA x86-64 box you'll have to fix all the
-# ISA drivers you need yourself.
-#
-
-mainmenu "Linux Kernel Configuration"
-
-config X86_64
-	bool
-	default y
-	help
-	  Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
-	  classical 32-bit x86 architecture. For details see
-	  <http://www.x86-64.org/>.
-
-config 64BIT
-	def_bool y
-
-config X86
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config GENERIC_TIME_VSYSCALL
-	bool
-	default y
-
-config GENERIC_CMOS_UPDATE
-	bool
-	default y
-
-config CLOCKSOURCE_WATCHDOG
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS_BROADCAST
-	bool
-	default y
-
-config ZONE_DMA32
-	bool
-	default y
-
-config LOCKDEP_SUPPORT
-	bool
-	default y
-
-config STACKTRACE_SUPPORT
-	bool
-	default y
-
-config SEMAPHORE_SLEEPERS
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config ZONE_DMA
-	bool
-	default y
-
-config ISA
-	bool
-
-config SBUS
-	bool
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config X86_CMPXCHG
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	default y
-
-config GENERIC_IOMAP
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-config DMI
-	bool
-	default y
-
-config AUDIT_ARCH
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-source "init/Kconfig"
-
-
-menu "Processor type and features"
-
-source "kernel/time/Kconfig"
-
-choice
-	prompt "Subarchitecture Type"
-	default X86_PC
-
-config X86_PC
-	bool "PC-compatible"
-	help
-	  Choose this option if your computer is a standard PC or compatible.
-
-config X86_VSMP
-	bool "Support for ScaleMP vSMP"
-	depends on PCI
-	 help
-	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
-	  supposed to run on these EM64T-based machines.  Only choose this option
-	  if you have one of these machines.
-
-endchoice
-
-choice
-	prompt "Processor family"
-	default GENERIC_CPU
-
-config MK8
-	bool "AMD-Opteron/Athlon64"
-	help
-	  Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
-
-config MPSC
-       bool "Intel P4 / older Netburst based Xeon"
-       help
-	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
-	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
-	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
-          Netburst core and shouldn't use this option. You can distinguish them
-	  using the cpu family field
-	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
-
-config MCORE2
-	bool "Intel Core2 / newer Xeon"
-	help
-	  Optimize for Intel Core2 and newer Xeons (51xx)
-	  You can distinguish the newer Xeons from the older ones using
-	  the cpu family field in /proc/cpuinfo. 15 is an older Xeon
-	  (use CONFIG_MPSC then), 6 is a newer one.
-
-config GENERIC_CPU
-	bool "Generic-x86-64"
-	help
-	  Generic x86-64 CPU.
-	  Run equally well on all x86-64 CPUs.
-
-endchoice
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_L1_CACHE_BYTES
-	int
-	default "128" if GENERIC_CPU || MPSC
-	default "64" if MK8 || MCORE2
-
-config X86_L1_CACHE_SHIFT
-	int
-	default "7" if GENERIC_CPU || MPSC
-	default "6" if MK8 || MCORE2
-
-config X86_INTERNODE_CACHE_BYTES
-	int
-	default "4096" if X86_VSMP
-	default X86_L1_CACHE_BYTES if !X86_VSMP
-
-config X86_TSC
-	bool
-	default y
-
-config X86_GOOD_APIC
-	bool
-	default y
-
-config MICROCODE
-	tristate "/dev/cpu/microcode - Intel CPU microcode support"
-	select FW_LOADER
-	---help---
-	  If you say Y here the 'File systems' section, you will be
-	  able to update the microcode on Intel processors. You will
-	  obviously need the actual microcode binary data itself which is
-	  not shipped with the Linux kernel.
-
-	  For latest news and information on obtaining all the required
-	  ingredients for this driver, check:
-	  <http://www.urbanmyth.org/microcode/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called microcode.
-	  If you use modprobe or kmod you may also want to add the line
-	  'alias char-major-10-184 microcode' to your /etc/modules.conf file.
-
-config MICROCODE_OLD_INTERFACE
-	bool
-	depends on MICROCODE
-	default y
-
-config X86_MSR
-	tristate "/dev/cpu/*/msr - Model-specific register support"
-	help
-	  This device gives privileged processes access to the x86
-	  Model-Specific Registers (MSRs).  It is a character device with
-	  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
-	  MSR accesses are directed to a specific CPU on multi-processor
-	  systems.
-
-config X86_CPUID
-	tristate "/dev/cpu/*/cpuid - CPU information support"
-	help
-	  This device gives processes access to the x86 CPUID instruction to
-	  be executed on a specific processor.  It is a character device
-	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
-	  /dev/cpu/31/cpuid.
-
-config X86_HT
-	bool
-	depends on SMP && !MK8
-	default y
-
-config MATH_EMULATION
-	bool
-
-config MCA
-	bool
-
-config EISA
-	bool
-
-config X86_IO_APIC
-	bool
-	default y
-
-config X86_LOCAL_APIC
-	bool
-	default y
-
-config MTRR
-	bool "MTRR (Memory Type Range Register) support"
-	---help---
-	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
-	  the Memory Type Range Registers (MTRRs) may be used to control
-	  processor access to memory ranges. This is most useful if you have
-	  a video (VGA) card on a PCI or AGP bus. Enabling write-combining
-	  allows bus write transfers to be combined into a larger transfer
-	  before bursting over the PCI/AGP bus. This can increase performance
-	  of image write operations 2.5 times or more. Saying Y here creates a
-	  /proc/mtrr file which may be used to manipulate your processor's
-	  MTRRs. Typically the X server should use this.
-
-	  This code has a reasonably generic interface so that similar
-	  control registers on other processors can be easily supported
-	  as well.
-
-	  Saying Y here also fixes a problem with buggy SMP BIOSes which only
-	  set the MTRRs for the boot CPU and not for the secondary CPUs. This
-	  can lead to all sorts of problems, so it's good to say Y here.
-
-	  Just say Y here, all x86-64 machines support MTRRs.
-
-	  See <file:Documentation/mtrr.txt> for more information.
-
-config SMP
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all,
-	  singleprocessor machines. On a singleprocessor machine, the kernel
-	  will run faster if you say N here.
-
-	  If you don't know what to do here, say N.
-
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	default n
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
-	  cost of slightly increased overhead in some places. If unsure say
-	  N here.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-source "kernel/Kconfig.preempt"
-
-config NUMA
-       bool "Non Uniform Memory Access (NUMA) Support"
-       depends on SMP
-       help
-	 Enable NUMA (Non Uniform Memory Access) support. The kernel 
-	 will try to allocate memory used by a CPU on the local memory 
-	 controller of the CPU and add some more NUMA awareness to the kernel.
-	 This code is recommended on all multiprocessor Opteron systems.
-	 If the system is EM64T, you should say N unless your system is EM64T 
-	 NUMA. 
-
-config K8_NUMA
-       bool "Old style AMD Opteron NUMA detection"
-       depends on NUMA && PCI
-       default y
-       help
-	 Enable K8 NUMA node topology detection.  You should say Y here if
-	 you have a multi processor AMD K8 system. This uses an old
-	 method to read the NUMA configuration directly from the builtin
-	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
-	 instead, which also takes priority if both are compiled in.   
-
-config NODES_SHIFT
-	int
-	default "6"
-	depends on NEED_MULTIPLE_NODES
-
-# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig.
-
-config X86_64_ACPI_NUMA
-       bool "ACPI NUMA detection"
-       depends on NUMA
-       select ACPI 
-	select PCI
-       select ACPI_NUMA
-       default y
-       help
-	 Enable ACPI SRAT based node topology detection.
-
-config NUMA_EMU
-	bool "NUMA emulation"
-	depends on NUMA
-	help
-	  Enable NUMA emulation. A flat machine will be split
-	  into virtual nodes when booted with "numa=fake=N", where N is the
-	  number of nodes. This is only useful for debugging.
-
-config ARCH_DISCONTIGMEM_ENABLE
-       bool
-       depends on NUMA
-       default y
-
-config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y
-	depends on NUMA
-
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	depends on (NUMA || EXPERIMENTAL)
-	select SPARSEMEM_VMEMMAP_ENABLE
-
-config ARCH_MEMORY_PROBE
-	def_bool y
-	depends on MEMORY_HOTPLUG
-
-config ARCH_FLATMEM_ENABLE
-	def_bool y
-	depends on !NUMA
-
-source "mm/Kconfig"
-
-config MEMORY_HOTPLUG_RESERVE
-	def_bool y
-	depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
-	def_bool y
-	depends on NUMA
-
-config OUT_OF_LINE_PFN_TO_PAGE
-	def_bool y
-	depends on DISCONTIGMEM
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-255)"
-	range 2 255
-	depends on SMP
-	default "8"
-	help
-	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support. Current maximum is 255 CPUs due to
-	  APIC addressing limits. Less depending on the hardware.
-
-	  This is purely to save memory - each supported CPU requires
-	  memory in the static kernel configuration.
-
-config PHYSICAL_ALIGN
-	hex
-	default "0x200000"
-
-config HOTPLUG_CPU
-	bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
-	help
-		Say Y here to experiment with turning CPUs off and on.  CPUs
-		can be controlled through /sys/devices/system/cpu/cpu#.
-		This is also required for suspend/hibernation on SMP systems.
-
-		Say N if you want to disable CPU hotplug and don't need to
-		suspend.
-
-config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y
-
-config HPET_TIMER
-	bool
-	default y
-	help
-	  Use the IA-PC HPET (High Precision Event Timer) to manage
-	  time in preference to the PIT and RTC, if a HPET is
-	  present.  The HPET provides a stable time base on SMP
-	  systems, unlike the TSC, but it is more expensive to access,
-	  as it is off-chip.  You can find the HPET spec at
-	  <http://www.intel.com/hardwaredesign/hpetspec.htm>.
-
-config HPET_EMULATE_RTC
-	bool
-	depends on HPET_TIMER && RTC=y
-	default y
-
-# Mark as embedded because too many people got it wrong.
-# The code disables itself when not needed.
-config GART_IOMMU
-	bool "GART IOMMU support" if EMBEDDED
-	default y
-	select SWIOTLB
-	select AGP
-	depends on PCI
-	help
-	  Support for full DMA access of devices with 32bit memory access only
-	  on systems with more than 3GB. This is usually needed for USB,
-	  sound, many IDE/SATA chipsets and some other devices.
-	  Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
-	  based hardware IOMMU and a software bounce buffer based IOMMU used
-	  on Intel systems and as fallback.
-	  The code is only active when needed (enough memory and limited
-	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
-	  too.
-
-config CALGARY_IOMMU
-	bool "IBM Calgary IOMMU support"
-	select SWIOTLB
-	depends on PCI && EXPERIMENTAL
-	help
-	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
-	  systems. Needed to run systems with more than 3GB of memory
-	  properly with 32-bit PCI devices that do not support DAC
-	  (Double Address Cycle). Calgary also supports bus level
-	  isolation, where all DMAs pass through the IOMMU.  This
-	  prevents them from going anywhere except their intended
-	  destination. This catches hard-to-find kernel bugs and
-	  mis-behaving drivers and devices that do not use the DMA-API
-	  properly to set up their DMA buffers.  The IOMMU can be
-	  turned off at boot time with the iommu=off parameter.
-	  Normally the kernel will make the right choice by itself.
-	  If unsure, say Y.
-
-config CALGARY_IOMMU_ENABLED_BY_DEFAULT
-	bool "Should Calgary be enabled by default?"
-	default y
-	depends on CALGARY_IOMMU
-	help
-	  Should Calgary be enabled by default? if you choose 'y', Calgary
-	  will be used (if it exists). If you choose 'n', Calgary will not be
-	  used even if it exists. If you choose 'n' and would like to use
-	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
-	  If unsure, say Y.
-
-# need this always selected by IOMMU for the VIA workaround
-config SWIOTLB
-	bool
-	help
-	  Support for software bounce buffers used on x86-64 systems
-	  which don't have a hardware IOMMU (e.g. the current generation
-	  of Intel's x86-64 CPUs). Using this PCI devices which can only
-	  access 32-bits of memory can be used on systems with more than
-	  3 GB of memory. If unsure, say Y.
-
-config X86_MCE
-	bool "Machine check support" if EMBEDDED
-	default y
-	help
-	   Include a machine check error handler to report hardware errors.
-	   This version will require the mcelog utility to decode some
-	   machine check error logs. See
-	   ftp://ftp.x86-64.org/pub/linux/tools/mcelog
-
-config X86_MCE_INTEL
-	bool "Intel MCE features"
-	depends on X86_MCE && X86_LOCAL_APIC
-	default y
-	help
-	   Additional support for intel specific MCE features such as
-	   the thermal monitor.
-
-config X86_MCE_AMD
-	bool "AMD MCE features"
-	depends on X86_MCE && X86_LOCAL_APIC
-	default y
-	help
-	   Additional support for AMD specific MCE features such as
-	   the DRAM Error Threshold.
-
-config KEXEC
-	bool "kexec system call"
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Generate crash dump after being started by kexec.
-	  This should be normally only set in special crash dump kernels
-	  which are loaded in the main kernel with kexec-tools into
-	  a specially reserved region and then later executed after
-	  a crash by kdump/kexec. The crash dump kernel must be compiled
-	  to a memory address not used by the main kernel or BIOS using
-	  PHYSICAL_START, or it must be built as a relocatable image
-	  (CONFIG_RELOCATABLE=y).
-	  For more details see Documentation/kdump/kdump.txt
-
-config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Builds a relocatable kernel. This enables loading and running
-	  a kernel binary from a different physical address than it has
-	  been compiled for.
-
-	  One use is for the kexec on panic case where the recovery kernel
-	  must live at a different physical address than the primary
-	  kernel.
-
-	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
-	  it has been loaded at and the compile time physical address
-	  (CONFIG_PHYSICAL_START) is ignored.
-
-config PHYSICAL_START
-	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x200000"
-	help
-	  This gives the physical address where the kernel is loaded. It
-	  should be aligned to 2MB boundary.
-
-	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
-	  bzImage will decompress itself to above physical address and
-	  run from there. Otherwise, bzImage will run from the address where
-	  it has been loaded by the boot loader and will ignore above physical
-	  address.
-
-	  In normal kdump cases one does not have to set/change this option
-	  as now bzImage can be compiled as a completely relocatable image
-	  (CONFIG_RELOCATABLE=y) and be used to load and run from a different
-	  address. This option is mainly useful for the folks who don't want
-	  to use a bzImage for capturing the crash dump and want to use a
-	  vmlinux instead.
-
-	  So if you are using bzImage for capturing the crash dump, leave
-	  the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
-	  Otherwise if you plan to use vmlinux for capturing the crash dump
-	  change this value to start of the reserved region (Typically 16MB
-	  0x1000000). In other words, it can be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
-
-	  Usage of bzImage for capturing the crash dump is advantageous as
-	  one does not have to build two kernels. Same kernel can be used
-	  as production kernel and capture kernel.
-
-	  Don't change this unless you know what you are doing.
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-config CC_STACKPROTECTOR
-	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-         This option turns on the -fstack-protector GCC feature. This
-	  feature puts, at the beginning of critical functions, a canary
-	  value on the stack just before the return address, and validates
-	  the value just before actually returning.  Stack based buffer
-	  overflows (that need to overwrite this return address) now also
-	  overwrite the canary, which gets detected and the attack is then
-	  neutralized via a kernel panic.
-
-	  This feature requires gcc version 4.2 or above, or a distribution
-	  gcc with the feature backported. Older versions are automatically
-	  detected and for those versions, this configuration option is ignored.
-
-config CC_STACKPROTECTOR_ALL
-	bool "Use stack-protector for all functions"
-	depends on CC_STACKPROTECTOR
-	help
-	  Normally, GCC only inserts the canary value protection for
-	  functions that use large-ish on-stack buffers. By enabling
-	  this option, GCC will be asked to do this for ALL functions.
-
-source kernel/Kconfig.hz
-
-config K8_NB
-	def_bool y
-	depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
-
-endmenu
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-# we have no ISA slots, but we do have ISA-style DMA.
-config ISA_DMA_API
-	bool
-	default y
-
-config GENERIC_PENDING_IRQ
-	bool
-	depends on GENERIC_HARDIRQS && SMP
-	default y
-
-menu "Power management options"
-
-source kernel/power/Kconfig
-
-config ARCH_HIBERNATION_HEADER
-	bool
-	depends on HIBERNATION
-	default y
-
-source "drivers/acpi/Kconfig"
-
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_64"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI etc.)"
-
-config PCI
-	bool "PCI support"
-	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-
-# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
-config PCI_DIRECT
-	bool
-	depends on PCI
-	default y
-
-config PCI_MMCONFIG
-	bool "Support mmconfig PCI config space access"
-	depends on PCI && ACPI
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-	default y
-
-config DMAR
-	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
-	depends on PCI_MSI && ACPI && EXPERIMENTAL
-	help
-	  DMA remapping (DMAR) devices support enables independent address
-	  translations for Direct Memory Access (DMA) from devices.
-	  These DMA remapping devices are reported via ACPI tables
-	  and include PCI device scope covered by these DMA
-	  remapping devices.
-
-config DMAR_GFX_WA
-	bool "Support for Graphics workaround"
-	depends on DMAR
-	default y
-	help
-	 Current Graphics drivers tend to use physical address
-	 for DMA and avoid using DMA APIs. Setting this config
-	 option permits the IOMMU driver to set a unity map for
-	 all the OS-visible memory. Hence the driver can continue
-	 to use physical addresses for DMA.
-
-config DMAR_FLOPPY_WA
-	bool
-	depends on DMAR
-	default y
-	help
-	 Floppy disk drivers are know to bypass DMA API calls
-	 thereby failing to work when IOMMU is enabled. This
-	 workaround will setup a 1:1 mapping for the first
-	 16M to make floppy (an ISA device) work.
-
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-
-menu "Executable file formats / Emulations"
-
-source "fs/Kconfig.binfmt"
-
-config IA32_EMULATION
-	bool "IA32 Emulation"
-	help
-	  Include code to run 32-bit programs under a 64-bit kernel. You should
-	  likely turn this on, unless you're 100% sure that you don't have any
-	  32-bit programs left.
-
-config IA32_AOUT
-       tristate "IA32 a.out support"
-       depends on IA32_EMULATION
-       help
-         Support old a.out binaries in the 32bit emulation.
-
-config COMPAT
-	bool
-	depends on IA32_EMULATION
-	default y
-
-config COMPAT_FOR_U64_ALIGNMENT
-	def_bool COMPAT
-
-config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
-
-endmenu
-
-source "net/Kconfig"
-
-source drivers/Kconfig
-
-source "drivers/firmware/Kconfig"
-
-source fs/Kconfig
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/x86/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3095973..116b03a 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -1,12 +1,16 @@
 # Unified Makefile for i386 and x86_64
 
 # select defconfig based on actual architecture
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
+ifeq ($(ARCH),x86)
+        KBUILD_DEFCONFIG := i386_defconfig
+else
+        KBUILD_DEFCONFIG := $(ARCH)_defconfig
+endif
 
-# # No need to remake these files
+# No need to remake these files
 $(srctree)/arch/x86/Makefile%: ;
 
-ifeq ($(ARCH),i386)
+ifeq ($(CONFIG_X86_32),y)
         include $(srctree)/arch/x86/Makefile_32
 else
         include $(srctree)/arch/x86/Makefile_64
diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32
index 346ac07..50394da 100644
--- a/arch/x86/Makefile_32
+++ b/arch/x86/Makefile_32
@@ -160,7 +160,7 @@
 	$(Q)$(MAKE) $(clean)=arch/x86/boot
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -170,6 +170,6 @@
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf
diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64
index 57e714a..a804860 100644
--- a/arch/x86/Makefile_64
+++ b/arch/x86/Makefile_64
@@ -127,7 +127,7 @@
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -137,8 +137,8 @@
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf
 
 
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 89dbf97..7a3116c 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -49,10 +49,10 @@
 
 # How to compile the 16-bit code.  Note we always compile for -march=i386,
 # that way we can complain to the user if the CPU is insufficient.
-cflags-i386   := 
-cflags-x86_64 := -m32
+cflags-$(CONFIG_X86_32) :=
+cflags-$(CONFIG_X86_64) := -m32
 KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-		   $(cflags-$(ARCH)) \
+		   $(cflags-y) \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/code16gcc.h \
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index e655a89..769065b 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -42,13 +42,7 @@
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
-#ifdef CONFIG_X86_64
-static const int req_level = 64;
-#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
 static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
-#else
-static const int req_level = 3;
-#endif
 
 static const u32 req_flags[NCAPINTS] =
 {
diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index 2e55923..fa6bed1 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -28,17 +28,19 @@
  * void protected_mode_jump(u32 entrypoint, u32 bootparams);
  */
 protected_mode_jump:
-	xorl	%ebx, %ebx		# Flag to indicate this is a boot
 	movl	%edx, %esi		# Pointer to boot_params table
 	movl	%eax, 2f		# Patch ljmpl instruction
-	jmp	1f			# Short jump to flush instruction q.
 
-1:
 	movw	$__BOOT_DS, %cx
+	xorl	%ebx, %ebx		# Per the 32-bit boot protocol
+	xorl	%ebp, %ebp		# Per the 32-bit boot protocol
+	xorl	%edi, %edi		# Per the 32-bit boot protocol
 
 	movl	%cr0, %edx
 	orb	$1, %dl			# Protected mode (PE) bit
 	movl	%edx, %cr0
+	jmp	1f			# Short jump to serialize on 386/486
+1:
 
 	movw	%cx, %ds
 	movw	%cx, %es
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 18b2318..df588f0 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -159,20 +159,16 @@
 
 sysenter_tracesys:
 	CFI_RESTORE_STATE
+	xchgl	%r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
+	movq	%r9,R9(%rsp)
 	movq	$-ENOSYS,RAX(%rsp)	/* really needed? */
 	movq	%rsp,%rdi        /* &pt_regs -> arg1 */
 	call	syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
-	movl	%ebp, %ebp
-	/* no need to do an access_ok check here because rbp has been
-	   32bit zero extended */ 
-1:	movl	(%rbp),%r9d
-	.section __ex_table,"a"
-	.quad 1b,ia32_badarg
-	.previous
+	xchgl	%ebp,%r9d
 	jmp	sysenter_do_call
 	CFI_ENDPROC
 ENDPROC(ia32_sysenter_target)
@@ -262,20 +258,17 @@
 	
 cstar_tracesys:	
 	CFI_RESTORE_STATE
+	xchgl %r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
+	movq %r9,R9(%rsp)
 	movq $-ENOSYS,RAX(%rsp)	/* really needed? */
 	movq %rsp,%rdi        /* &pt_regs -> arg1 */
 	call syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
+	xchgl %ebp,%r9d
 	movl RSP-ARGOFFSET(%rsp), %r8d
-	/* no need to do an access_ok check here because r8 has been
-	   32bit zero extended */ 
-1:	movl	(%r8),%r9d
-	.section __ex_table,"a"
-	.quad 1b,ia32_badarg
-	.previous
 	jmp cstar_do_call
 END(ia32_cstar_target)
 				
diff --git a/arch/x86/ia32/ptrace32.c b/arch/x86/ia32/ptrace32.c
index f52770e..4a233ad 100644
--- a/arch/x86/ia32/ptrace32.c
+++ b/arch/x86/ia32/ptrace32.c
@@ -228,8 +228,6 @@
 	return ret;
 }
 
-#define COMPAT_GDT_ENTRY_TLS_MIN 6
-
 asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
 {
 	struct task_struct *child;
@@ -248,6 +246,8 @@
 	case PTRACE_SYSCALL:
 	case PTRACE_OLDSETOPTIONS:
 	case PTRACE_SETOPTIONS:
+	case PTRACE_SET_THREAD_AREA:
+	case PTRACE_GET_THREAD_AREA:
 		return sys_ptrace(request, pid, addr, data); 
 
 	default:
@@ -271,12 +271,6 @@
 	case PTRACE_SETSIGINFO:
 	case PTRACE_GETSIGINFO:
 		return ptrace32_siginfo(request, pid, addr, data);
-
-	case PTRACE_SET_THREAD_AREA:
-	case PTRACE_GET_THREAD_AREA:
-		return sys_ptrace(request, pid,
-			addr + GDT_ENTRY_TLS_MIN - COMPAT_GDT_ENTRY_TLS_MIN,
-			data);
 	}
 
 	child = ptrace_get_task_struct(pid);
diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32
index b9d6798..a7bc93c 100644
--- a/arch/x86/kernel/Makefile_32
+++ b/arch/x86/kernel/Makefile_32
@@ -3,6 +3,7 @@
 #
 
 extra-y := head_32.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ui386
 
 obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
 		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
@@ -60,7 +61,7 @@
       cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
 		          -Wl,-T,$(filter-out FORCE,$^) -o $@
 
-export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386
 
 vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 24671c3..5a88890 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -3,7 +3,9 @@
 #
 
 extra-y 	:= head_64.o head64.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ux86_64
 EXTRA_AFLAGS	:= -traditional
+
 obj-y	:= process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
 		ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
 		x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 289247d..0ca27c7 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -637,6 +637,38 @@
 	}
 
 	hpet_address = hpet_tbl->address.address;
+
+	/*
+	 * Some broken BIOSes advertise HPET at 0x0. We really do not
+	 * want to allocate a resource there.
+	 */
+	if (!hpet_address) {
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: %#lx is invalid\n",
+		       hpet_tbl->id, hpet_address);
+		return 0;
+	}
+#ifdef CONFIG_X86_64
+	/*
+	 * Some even more broken BIOSes advertise HPET at
+	 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+	 * some noise:
+	 */
+	if (hpet_address == 0xfed0000000000000UL) {
+		if (!hpet_force_user) {
+			printk(KERN_WARNING PREFIX "HPET id: %#x "
+			       "base: 0xfed0000000000000 is bogus\n "
+			       "try hpet=force on the kernel command line to "
+			       "fix it up to 0xfed00000.\n", hpet_tbl->id);
+			hpet_address = 0;
+			return 0;
+		}
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: 0xfed0000000000000 fixed up "
+		       "to 0xfed00000.\n", hpet_tbl->id);
+		hpet_address >>= 32;
+	}
+#endif
 	printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
 	       hpet_tbl->id, hpet_address);
 
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index f63e5ff..a25db51 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -49,6 +49,9 @@
 	if (cpu_has(c, X86_FEATURE_EST))
 		buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
 
+	if (cpu_has(c, X86_FEATURE_ACPI))
+		buf[2] |= ACPI_PDC_T_FFH;
+
 	obj->type = ACPI_TYPE_BUFFER;
 	obj->buffer.length = 12;
 	obj->buffer.pointer = (u8 *) buf;
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig
similarity index 77%
rename from arch/x86/kernel/cpu/cpufreq/Kconfig_32
rename to arch/x86/kernel/cpu/cpufreq/Kconfig
index d8c6f13..151eda0 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig_32
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -19,6 +19,9 @@
 	  Processor Performance States.
 	  This driver also supports Intel Enhanced Speedstep.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -26,7 +29,7 @@
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
 	  processors.
@@ -42,7 +45,7 @@
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.
 
@@ -54,6 +57,7 @@
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
 	  AMD K6-3+ processors.
@@ -65,6 +69,7 @@
 config X86_POWERNOW_K7
 	tristate "AMD Mobile Athlon/Duron PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
 
@@ -76,23 +81,27 @@
 	bool
 	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
 	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	depends on X86_32
 	default y
 
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
 
 config X86_POWERNOW_K8_ACPI
-	bool "ACPI Support"
-	select ACPI_PROCESSOR
-	depends on ACPI && X86_POWERNOW_K8
+	bool
+	prompt "ACPI Support" if X86_32
+	depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
 	default y
 	help
 	  This provides access to the K8s Processor Performance States via ACPI.
@@ -104,7 +113,7 @@
 
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-	depends on PCI
+	depends on X86_32 && PCI
 	help
 	 This add the CPUFreq driver for NatSemi Geode processors which
 	 support suspend modulation.
@@ -114,15 +123,20 @@
 	 If in doubt, say N.
 
 config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep"
+	tristate "Intel Enhanced SpeedStep (deprecated)"
 	select CPU_FREQ_TABLE
-	select X86_SPEEDSTEP_CENTRINO_TABLE
+	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
 	help
+	  This is deprecated and this functionality is now merged into
+	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+	  speedstep_centrino.
 	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
-	  you also need to say Y to "Use ACPI tables to decode..." below
-	  [which might imply enabling ACPI] if you want to use this driver
-	  on non-Banias CPUs.
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
+	  or 64bit enabled Intel Xeons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
@@ -130,7 +144,7 @@
 
 config X86_SPEEDSTEP_CENTRINO_TABLE
 	bool "Built-in tables for Banias CPUs"
-	depends on X86_SPEEDSTEP_CENTRINO
+	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
 	default y
 	help
 	  Use built-in tables for Banias CPUs if ACPI encoding
@@ -141,6 +155,7 @@
 config X86_SPEEDSTEP_ICH
 	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
@@ -154,7 +169,7 @@
 config X86_SPEEDSTEP_SMI
 	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -169,15 +184,24 @@
 	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
-	  processors.
+	  processors.  When enabled it will lower CPU temperature by skipping
+	  clocks.
+
+	  This driver should be only used in exceptional
+	  circumstances when very low power is needed because it causes severe
+	  slowdowns and noticeable latencies.  Normally Speedstep should be used
+	  instead.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-	  If in doubt, say N.
+	  Unless you are absolutely sure say N.
 
 config X86_CPUFREQ_NFORCE2
 	tristate "nVidia nForce2 FSB changing"
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
 	  platforms.
@@ -188,6 +212,7 @@
 
 config X86_LONGRUN
 	tristate "Transmeta LongRun"
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
 	  which support LongRun.
@@ -199,7 +224,7 @@
 config X86_LONGHAUL
 	tristate "VIA Cyrix III Longhaul"
 	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
+	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
 	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
@@ -212,7 +237,7 @@
 config X86_E_POWERSAVER
 	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
@@ -233,11 +258,11 @@
 
 config X86_SPEEDSTEP_LIB
 	tristate
-	default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
 
 config X86_SPEEDSTEP_RELAXED_CAP_CHECK
 	bool "Relaxed speedstep capability checks"
-	depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
 	help
 	  Don't perform all checks for a speedstep capable system which would
 	  normally be done. Some ancient or strange systems, though speedstep
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64
deleted file mode 100644
index 9c9699f..0000000
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig_64
+++ /dev/null
@@ -1,108 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config X86_POWERNOW_K8
-	tristate "AMD Opteron/Athlon64 PowerNow!"
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powernow-k8.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
-	bool
-	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
-	default y
-
-config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep (deprecated)"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This is deprecated and this functionality is now merged into
-	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-	  speedstep_centrino.
-	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
-	  or 64bit enabled Intel Xeons.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called speedstep-centrino.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This driver adds a CPUFreq driver which utilizes the ACPI
-	  Processor Performance States.
-	  This driver also supports Intel Enhanced Speedstep.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acpi-cpufreq.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-comment "shared options"
-
-config X86_ACPI_CPUFREQ_PROC_INTF
-	bool "/proc/acpi/processor/../performance interface (deprecated)"
-	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI
-	help
-	  This enables the deprecated /proc/acpi/processor/../performance
-	  interface. While it is helpful for debugging, the generic,
-	  cross-architecture cpufreq interfaces should be used.
-
-	  If in doubt, say N.
-
-config X86_P4_CLOCKMOD
-	tristate "Intel Pentium 4 clock modulation"
-	depends on EMBEDDED
-	select CPU_FREQ_TABLE
-	help
-	  This adds the clock modulation driver for Intel Pentium 4 / XEON
-	  processors.  When enabled it will lower CPU temperature by skipping
-	  clocks.
-
-	  This driver should be only used in exceptional
-	  circumstances when very low power is needed because it causes severe
-	  slowdowns and noticeable latencies.  Normally Speedstep should be used
-	  instead.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called p4-clockmod.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  Unless you are absolutely sure say N.
-
-
-config X86_SPEEDSTEP_LIB
-	tristate
-	default X86_P4_CLOCKMOD
-
-endif
-
-endmenu
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 9c36a53..99e1ef9 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -46,7 +46,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 2.00.00"
+#define VERSION "version 2.20.00"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -73,33 +73,11 @@
 	return 1000 * find_freq_from_fid(fid);
 }
 
-/* Return a frequency in MHz, given an input fid and did */
-static u32 find_freq_from_fiddid(u32 fid, u32 did)
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate)
 {
-	if (current_cpu_data.x86 == 0x10)
-		return 100 * (fid + 0x10) >> did;
-	else
-		return 100 * (fid + 0x8) >> did;
+	return data[pstate].frequency;
 }
 
-static u32 find_khz_freq_from_fiddid(u32 fid, u32 did)
-{
-	return 1000 * find_freq_from_fiddid(fid, did);
-}
-
-static u32 find_fid_from_pstate(u32 pstate)
-{
-	u32 hi, lo;
-	rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
-	return lo & HW_PSTATE_FID_MASK;
-}
-
-static u32 find_did_from_pstate(u32 pstate)
-{
-	u32 hi, lo;
-	rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
-	return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
-}
 
 /* Return the vco fid for an input fid
  *
@@ -142,9 +120,7 @@
 	if (cpu_family == CPU_HW_PSTATE) {
 		rdmsr(MSR_PSTATE_STATUS, lo, hi);
 		i = lo & HW_PSTATE_MASK;
-		rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi);
-		data->currfid = lo & HW_PSTATE_FID_MASK;
-		data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+		data->currpstate = i;
 		return 0;
 	}
 	do {
@@ -295,7 +271,7 @@
 static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 {
 	wrmsr(MSR_PSTATE_CTRL, pstate, 0);
-	data->currfid = find_fid_from_pstate(pstate);
+	data->currpstate = pstate;
 	return 0;
 }
 
@@ -845,17 +821,20 @@
 static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
+	u32 hi = 0, lo = 0;
+	rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
+	data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 index;
 		u32 hi = 0, lo = 0;
-		u32 fid;
-		u32 did;
 
 		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
-		if (index > MAX_HW_PSTATE) {
+		if (index > data->max_hw_pstate) {
 			printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
 			printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
+			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
@@ -864,22 +843,9 @@
 			continue;
 		}
 
-		fid = lo & HW_PSTATE_FID_MASK;
-		did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+		powernow_table[i].index = index;
 
-		dprintk("   %d : fid 0x%x, did 0x%x\n", index, fid, did);
-
-		powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT);
-
-		powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did);
-
-		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
-			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
-				powernow_table[i].frequency,
-				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
-			continue;
-		}
+		powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -1020,22 +986,18 @@
 /* Take a frequency, and issue the hardware pstate transition command */
 static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
 {
-	u32 fid = 0;
-	u32 did = 0;
 	u32 pstate = 0;
 	int res, i;
 	struct cpufreq_freqs freqs;
 
 	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
 
-	/* get fid did for hardware pstate transition */
+	/* get MSR index for hardware pstate transition */
 	pstate = index & HW_PSTATE_MASK;
-	if (pstate > MAX_HW_PSTATE)
+	if (pstate > data->max_hw_pstate)
 		return 0;
-	fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT;
-	did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT;
-	freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid);
-	freqs.new = find_khz_freq_from_fiddid(fid, did);
+	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask(i, *(data->available_cores)) {
 		freqs.cpu = i;
@@ -1043,9 +1005,7 @@
 	}
 
 	res = transition_pstate(data, pstate);
-	data->currfid = find_fid_from_pstate(pstate);
-	data->currdid = find_did_from_pstate(pstate);
-	freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask(i, *(data->available_cores)) {
 		freqs.cpu = i;
@@ -1090,10 +1050,7 @@
 	if (query_current_values_with_pending_wait(data))
 		goto err_out;
 
-	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("targ: curr fid 0x%x, did 0x%x\n",
-			data->currfid, data->currdid);
-	else {
+	if (cpu_family != CPU_HW_PSTATE) {
 		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
 
@@ -1124,7 +1081,7 @@
 	mutex_unlock(&fidvid_mutex);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
@@ -1223,7 +1180,7 @@
 	    + (3 * (1 << data->irt) * 10)) * 1000;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	dprintk("policy current frequency %d kHz\n", pol->cur);
@@ -1240,8 +1197,7 @@
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("cpu_init done, current fid 0x%x, did 0x%x\n",
-			data->currfid, data->currdid);
+		dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate);
 	else
 		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
@@ -1297,7 +1253,7 @@
 		goto out;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		khz = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		khz = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	else
 		khz = find_khz_freq_from_fid(data->currfid);
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index 7c4f6e0..afd2b52 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -10,6 +10,7 @@
 
 	u32 numps;  /* number of p-states */
 	u32 batps;  /* number of p-states supported on battery */
+	u32 max_hw_pstate; /* maximum legal hardware pstate */
 
 	/* these values are constant when the PSB is used to determine
 	 * vid/fid pairings, but are modified during the ->target() call
@@ -21,8 +22,8 @@
 	u32 plllock; /* pll lock time, units 1 us */
         u32 exttype; /* extended interface = 1 */
 
-	/* keep track of the current fid / vid or did */
-	u32 currvid, currfid, currdid;
+	/* keep track of the current fid / vid or pstate */
+	u32 currvid, currfid, currpstate;
 
 	/* the powernow_table includes all frequency and vid/fid pairings:
 	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
@@ -87,23 +88,14 @@
 
 /* Hardware Pstate _PSS and MSR definitions */
 #define USE_HW_PSTATE		0x00000080
-#define HW_PSTATE_FID_MASK 	0x0000003f
-#define HW_PSTATE_DID_MASK 	0x000001c0
-#define HW_PSTATE_DID_SHIFT 	6
 #define HW_PSTATE_MASK 		0x00000007
 #define HW_PSTATE_VALID_MASK 	0x80000000
-#define HW_FID_INDEX_SHIFT	8
-#define HW_FID_INDEX_MASK	0x0000ff00
-#define HW_DID_INDEX_SHIFT	16
-#define HW_DID_INDEX_MASK	0x00ff0000
-#define HW_WATTS_MASK		0xff
-#define HW_PWR_DVR_MASK		0x300
-#define HW_PWR_DVR_SHIFT	8
-#define HW_PWR_MAX_MULT		3
-#define MAX_HW_PSTATE		8	/* hw pstate supports up to 8 */
+#define HW_PSTATE_MAX_MASK	0x000000f0
+#define HW_PSTATE_MAX_SHIFT	4
 #define MSR_PSTATE_DEF_BASE 	0xc0010064 /* base of Pstate MSRs */
 #define MSR_PSTATE_STATUS 	0xc0010063 /* Pstate Status MSR */
 #define MSR_PSTATE_CTRL 	0xc0010062 /* Pstate control MSR */
+#define MSR_PSTATE_CUR_LIMIT	0xc0010061 /* pstate current limit MSR */
 
 /* define the two driver architectures */
 #define CPU_OPTERON 0
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index b9f802e..4b21d29 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -802,13 +802,15 @@
 	NULL
 };
 
+static cpumask_t mce_device_initialized = CPU_MASK_NONE;
+
 /* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
 static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
 	int i;
 
-	if (!mce_available(&cpu_data(cpu)))
+	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
 	memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
@@ -825,6 +827,7 @@
 		if (err)
 			goto error;
 	}
+	cpu_set(cpu, mce_device_initialized);
 
 	return 0;
 error:
@@ -841,10 +844,14 @@
 {
 	int i;
 
+	if (!cpu_isset(cpu, mce_device_initialized))
+		return;
+
 	for (i = 0; mce_attributes[i]; i++)
 		sysdev_remove_file(&per_cpu(device_mce,cpu),
 			mce_attributes[i]);
 	sysdev_unregister(&per_cpu(device_mce,cpu));
+	cpu_clear(cpu, mce_device_initialized);
 }
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
@@ -852,21 +859,18 @@
 mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	int err = 0;
 
 	switch (action) {
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		err = mce_create_device(cpu);
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		mce_create_device(cpu);
 		break;
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		mce_remove_device(cpu);
 		break;
 	}
-	return err ? NOTIFY_BAD : NOTIFY_OK;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block mce_cpu_notifier = {
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 9abbdf7..3b20613 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -139,13 +139,12 @@
 	mtrr_type	smp_type;
 };
 
-#ifdef CONFIG_SMP
-
 static void ipi_handler(void *info)
 /*  [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
     [RETURNS] Nothing.
 */
 {
+#ifdef CONFIG_SMP
 	struct set_mtrr_data *data = info;
 	unsigned long flags;
 
@@ -168,9 +167,8 @@
 
 	atomic_dec(&data->count);
 	local_irq_restore(flags);
-}
-
 #endif
+}
 
 static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
 	return type1 == MTRR_TYPE_UNCACHABLE ||
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 066f8c6..3900e46 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -89,8 +89,6 @@
 	int fpu_exception;
 
 #ifdef CONFIG_SMP
-	if (!cpu_online(n))
-		return 0;
 	n = c->cpu_index;
 #endif
 	seq_printf(m, "processor\t: %d\n"
@@ -177,14 +175,14 @@
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = first_cpu(cpu_possible_map);
-	if ((*pos) < NR_CPUS && cpu_possible(*pos))
+		*pos = first_cpu(cpu_online_map);
+	if ((*pos) < NR_CPUS && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_possible_map);
+	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
 static void c_stop(struct seq_file *m, void *v)
diff --git a/arch/x86/kernel/i387_64.c b/arch/x86/kernel/i387_64.c
index 56c1f11..bfaff28 100644
--- a/arch/x86/kernel/i387_64.c
+++ b/arch/x86/kernel/i387_64.c
@@ -92,13 +92,14 @@
 	if (task_thread_info(tsk)->status & TS_USEDFPU) {
 		err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
 		if (err) return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
 		stts();
-		} else {
-		if (__copy_to_user(buf, &tsk->thread.i387.fxsave, 
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
 				   sizeof(struct i387_fxsave_struct)))
 			return -1;
-	} 
-		return 1;
+	}
+	return 1;
 }
 
 /*
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index f35c6eb..6bb80ea 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -962,7 +962,7 @@
 #define default_MCA_trigger(idx)	(1)
 #define default_MCA_polarity(idx)	(0)
 
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
 {
 	int bus = mp_irqs[idx].mpc_srcbus;
 	int polarity;
@@ -2830,6 +2830,25 @@
 	return 0;
 }
 
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mpc_irqtype == mp_INT &&
+		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
 #endif /* CONFIG_ACPI */
 
 static int __init parse_disable_timer_pin_1(char *arg)
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 953328b..435a8c9 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -546,7 +546,7 @@
 #define default_PCI_trigger(idx)	(1)
 #define default_PCI_polarity(idx)	(1)
 
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
 {
 	int bus = mp_irqs[idx].mpc_srcbus;
 	int polarity;
@@ -2222,8 +2222,27 @@
 	return 0;
 }
 
-#endif /* CONFIG_ACPI */
 
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mpc_irqtype == mp_INT &&
+		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
+#endif /* CONFIG_ACPI */
 
 /*
  * This function currently is only a helper for the i386 smp boot process where
@@ -2260,3 +2279,4 @@
 	}
 }
 #endif
+
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index f803ed0..600fd40 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -51,13 +51,13 @@
 
 static int endflag __initdata = 0;
 
-#ifdef CONFIG_SMP
 /* The performance counters used by NMI_LOCAL_APIC don't trigger when
  * the CPU is idle. To make sure the NMI watchdog really ticks on all
  * CPUs during the test make them busy.
  */
 static __init void nmi_cpu_busy(void *data)
 {
+#ifdef CONFIG_SMP
 	local_irq_enable_in_hardirq();
 	/* Intentionally don't use cpu_relax here. This is
 	   to make sure that the performance counter really ticks,
@@ -67,8 +67,8 @@
 	   care if they get somewhat less cycles. */
 	while (endflag == 0)
 		mb();
-}
 #endif
+}
 
 static int __init check_nmi_watchdog(void)
 {
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index 1a07bbe..f452726 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -39,6 +39,7 @@
 static struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
 };
 
 /*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 238633d..30d94d1 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -892,7 +892,6 @@
 
 #ifdef CONFIG_SMP
 	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
-	c->cpu_index = 0;
 #endif
 }
 
@@ -1078,8 +1077,6 @@
 
 
 #ifdef CONFIG_SMP
-	if (!cpu_online(c->cpu_index))
-		return 0;
 	cpu = c->cpu_index;
 #endif
 
@@ -1171,15 +1168,15 @@
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = first_cpu(cpu_possible_map);
-	if ((*pos) < NR_CPUS && cpu_possible(*pos))
+		*pos = first_cpu(cpu_online_map);
+	if ((*pos) < NR_CPUS && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_possible_map);
+	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
 
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index c821edc..368b194 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -82,18 +82,15 @@
 	int retval = 0;
 	int real_seconds, real_minutes, cmos_minutes;
 	unsigned char control, freq_select;
+	unsigned long flags;
 
 /*
- * IRQs are disabled when we're called from the timer interrupt,
- * no need for spin_lock_irqsave()
+ * set_rtc_mmss is called when irqs are enabled, so disable irqs here
  */
-
-	spin_lock(&rtc_lock);
-
+	spin_lock_irqsave(&rtc_lock, flags);
 /*
  * Tell the clock it's being set and stop it.
  */
-
 	control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
 
@@ -138,7 +135,7 @@
 	CMOS_WRITE(control, RTC_CONTROL);
 	CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
 
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }
@@ -164,21 +161,27 @@
 	unsigned century = 0;
 
 	spin_lock_irqsave(&rtc_lock, flags);
+	/*
+	 * if UIP is clear, then we have >= 244 microseconds before RTC
+	 * registers will be updated.  Spec sheet says that this is the
+	 * reliable way to read RTC - registers invalid (off bus) during update
+	 */
+	while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+		cpu_relax();
 
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
+
+	/* now read all RTC registers while stable with interrupts disabled */
+	sec = CMOS_READ(RTC_SECONDS);
+	min = CMOS_READ(RTC_MINUTES);
+	hour = CMOS_READ(RTC_HOURS);
+	day = CMOS_READ(RTC_DAY_OF_MONTH);
+	mon = CMOS_READ(RTC_MONTH);
+	year = CMOS_READ(RTC_YEAR);
 #ifdef CONFIG_ACPI
-		if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
-					acpi_gbl_FADT.century)
-			century = CMOS_READ(acpi_gbl_FADT.century);
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+				acpi_gbl_FADT.century)
+		century = CMOS_READ(acpi_gbl_FADT.century);
 #endif
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	/*
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a55b090..92c5611 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -93,38 +93,7 @@
 };
 static cycle_t clock_base;
 
-/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
- * real optimization trick!
- *
- * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
- * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
- * are reasonably expensive, batching them up makes sense.  For example, a
- * large munmap might update dozens of page table entries: that code calls
- * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
- * lguest_leave_lazy_mode().
- *
- * So, when we're in lazy mode, we call async_hypercall() to store the call for
- * future processing.  When lazy mode is turned off we issue a hypercall to
- * flush the stored calls.
- */
-static void lguest_leave_lazy_mode(void)
-{
-	paravirt_leave_lazy(paravirt_get_lazy_mode());
-	hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
-}
-
-static void lazy_hcall(unsigned long call,
-		       unsigned long arg1,
-		       unsigned long arg2,
-		       unsigned long arg3)
-{
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
-		hcall(call, arg1, arg2, arg3);
-	else
-		async_hcall(call, arg1, arg2, arg3);
-}
-
-/* async_hcall() is pretty simple: I'm quite proud of it really.  We have a
+/*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
  * do a normal hypercall.  Each entry in the ring has 4 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -134,8 +103,8 @@
  * full and we just make the hypercall directly.  This has the nice side
  * effect of causing the Host to run all the stored calls in the ring buffer
  * which empties it for next time! */
-void async_hcall(unsigned long call,
-		 unsigned long arg1, unsigned long arg2, unsigned long arg3)
+static void async_hcall(unsigned long call, unsigned long arg1,
+			unsigned long arg2, unsigned long arg3)
 {
 	/* Note: This code assumes we're uniprocessor. */
 	static unsigned int next_call;
@@ -161,7 +130,37 @@
 	}
 	local_irq_restore(flags);
 }
-/*:*/
+
+/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
+ * real optimization trick!
+ *
+ * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
+ * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
+ * are reasonably expensive, batching them up makes sense.  For example, a
+ * large munmap might update dozens of page table entries: that code calls
+ * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
+ * lguest_leave_lazy_mode().
+ *
+ * So, when we're in lazy mode, we call async_hcall() to store the call for
+ * future processing. */
+static void lazy_hcall(unsigned long call,
+		       unsigned long arg1,
+		       unsigned long arg2,
+		       unsigned long arg3)
+{
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+		hcall(call, arg1, arg2, arg3);
+	else
+		async_hcall(call, arg1, arg2, arg3);
+}
+
+/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue a hypercall to flush any stored calls. */
+static void lguest_leave_lazy_mode(void)
+{
+	paravirt_leave_lazy(paravirt_get_lazy_mode());
+	hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
+}
 
 /*G:033
  * After that diversion we return to our first native-instruction
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 952e7a8..aad9d95 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/preempt.h>
 #include <linux/delay.h>
 
 #include <asm/processor.h>
@@ -42,11 +43,13 @@
 {
 	unsigned long bclock, now;
 
+	preempt_disable();		/* TSC's are per-cpu */
 	rdtscl(bclock);
 	do {
 		rep_nop();
 		rdtscl(now);
 	} while ((now-bclock) < loops);
+	preempt_enable();
 }
 
 /*
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index 0ebbfb9..45cdd3f 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -10,7 +10,9 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/preempt.h>
 #include <linux/delay.h>
+
 #include <asm/delay.h>
 #include <asm/msr.h>
 
@@ -27,14 +29,15 @@
 void __delay(unsigned long loops)
 {
 	unsigned bclock, now;
-	
+
+	preempt_disable();		/* TSC's are pre-cpu */
 	rdtscl(bclock);
-	do
-	{
+	do {
 		rep_nop(); 
 		rdtscl(now);
 	}
-	while((now-bclock) < loops);
+	while ((now-bclock) < loops);
+	preempt_enable();
 }
 EXPORT_SYMBOL(__delay);
 
diff --git a/arch/x86/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
index 26a2d4c..2132ca6 100644
--- a/arch/x86/mach-voyager/voyager_cat.c
+++ b/arch/x86/mach-voyager/voyager_cat.c
@@ -568,7 +568,7 @@
  * boot cpu *after* all memory initialisation has been done (so we can
  * use kmalloc) but before smp initialisation, so we can probe the SMP
  * configuration and pick up necessary information.  */
-void
+void __init
 voyager_cat_init(void)
 {
 	voyager_module_t **modpp = &voyager_initial_module;
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 6937143..88124dd 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -1900,7 +1900,7 @@
 	smp_boot_cpus();
 }
 
-static void __devinit voyager_smp_prepare_boot_cpu(void)
+static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
 	init_gdt(smp_processor_id());
 	switch_to_new_gdt();
@@ -1911,7 +1911,7 @@
 	cpu_set(smp_processor_id(), cpu_present_map);
 }
 
-static int __devinit
+static int __cpuinit
 voyager_cpu_up(unsigned int cpu)
 {
 	/* This only works at boot for x86.  See "rewrite" above. */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 2d88f7c..7e35078 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -77,6 +77,9 @@
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 
+	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+		return AE_OK;
+
 	status = resource_to_addr(acpi_res, &addr);
 	if (ACPI_SUCCESS(status))
 		info->res_num++;
@@ -93,6 +96,9 @@
 	unsigned long flags;
 	struct resource *root;
 
+	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+		return AE_OK;
+
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 7a2ba45..e7bff0f 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -20,7 +20,7 @@
       cmd_syscall = $(CC) -m elf_x86_64 -nostdlib $(SYSCFLAGS_$(@F)) \
 		          -Wl,-T,$(filter-out FORCE,$^) -o $@
 
-export CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vdso.lds += -P -C
 
 vdso-flags = -fPIC -shared -Wl,-soname=linux-vdso.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv) \
diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c
index 91f6e85..3b1ae1a 100644
--- a/arch/x86/vdso/vgetcpu.c
+++ b/arch/x86/vdso/vgetcpu.c
@@ -13,32 +13,17 @@
 #include <asm/vgtod.h>
 #include "vextern.h"
 
-long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
+long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused)
 {
 	unsigned int dummy, p;
-	unsigned long j = 0;
 
-	/* Fast cache - only recompute value once per jiffies and avoid
-	   relatively costly rdtscp/cpuid otherwise.
-	   This works because the scheduler usually keeps the process
-	   on the same CPU and this syscall doesn't guarantee its
-	   results anyways.
-	   We do this here because otherwise user space would do it on
-	   its own in a likely inferior way (no access to jiffies).
-	   If you don't like it pass NULL. */
-	if (tcache && tcache->blob[0] == (j = *vdso_jiffies)) {
-		p = tcache->blob[1];
-	} else if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
+	if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
 		/* Load per CPU data from RDTSCP */
 		rdtscp(dummy, dummy, p);
 	} else {
 		/* Load per CPU data from GDT */
 		asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
 	}
-	if (tcache) {
-		tcache->blob[0] = j;
-		tcache->blob[1] = p;
-	}
 	if (cpu)
 		*cpu = p & 0xfff;
 	if (node)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index e47a930..0b4a479 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -789,6 +789,20 @@
 		__cfq_slice_expired(cfqd, cfqq, timed_out);
 }
 
+static int start_idle_class_timer(struct cfq_data *cfqd)
+{
+	unsigned long end = cfqd->last_end_request + CFQ_IDLE_GRACE;
+	unsigned long now = jiffies;
+
+	if (time_before(now, end) &&
+	    time_after_eq(now, cfqd->last_end_request)) {
+		mod_timer(&cfqd->idle_class_timer, end);
+		return 1;
+	}
+
+	return 0;
+}
+
 /*
  * Get next queue for service. Unless we have a queue preemption,
  * we'll simply select the first cfqq in the service tree.
@@ -805,19 +819,14 @@
 	cfqq = rb_entry(n, struct cfq_queue, rb_node);
 
 	if (cfq_class_idle(cfqq)) {
-		unsigned long end;
-
 		/*
 		 * if we have idle queues and no rt or be queues had
 		 * pending requests, either allow immediate service if
 		 * the grace period has passed or arm the idle grace
 		 * timer
 		 */
-		end = cfqd->last_end_request + CFQ_IDLE_GRACE;
-		if (time_before(jiffies, end)) {
-			mod_timer(&cfqd->idle_class_timer, end);
+		if (start_idle_class_timer(cfqd))
 			cfqq = NULL;
-		}
 	}
 
 	return cfqq;
@@ -2036,17 +2045,14 @@
 static void cfq_idle_class_timer(unsigned long data)
 {
 	struct cfq_data *cfqd = (struct cfq_data *) data;
-	unsigned long flags, end;
+	unsigned long flags;
 
 	spin_lock_irqsave(cfqd->queue->queue_lock, flags);
 
 	/*
 	 * race with a non-idle queue, reset timer
 	 */
-	end = cfqd->last_end_request + CFQ_IDLE_GRACE;
-	if (!time_after_eq(jiffies, end))
-		mod_timer(&cfqd->idle_class_timer, end);
-	else
+	if (!start_idle_class_timer(cfqd))
 		cfq_schedule_dispatch(cfqd);
 
 	spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
@@ -2068,9 +2074,10 @@
 			cfq_put_queue(cfqd->async_cfqq[0][i]);
 		if (cfqd->async_cfqq[1][i])
 			cfq_put_queue(cfqd->async_cfqq[1][i]);
-		if (cfqd->async_idle_cfqq)
-			cfq_put_queue(cfqd->async_idle_cfqq);
 	}
+
+	if (cfqd->async_idle_cfqq)
+		cfq_put_queue(cfqd->async_idle_cfqq);
 }
 
 static void cfq_exit_queue(elevator_t *e)
@@ -2125,6 +2132,7 @@
 
 	INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
 
+	cfqd->last_end_request = jiffies;
 	cfqd->cfq_quantum = cfq_quantum;
 	cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0];
 	cfqd->cfq_fifo_expire[1] = cfq_fifo_expire[1];
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 75c98d5..3b927be 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1143,22 +1143,9 @@
 void blk_queue_invalidate_tags(struct request_queue *q)
 {
 	struct list_head *tmp, *n;
-	struct request *rq;
 
-	list_for_each_safe(tmp, n, &q->tag_busy_list) {
-		rq = list_entry_rq(tmp);
-
-		if (rq->tag == -1) {
-			printk(KERN_ERR
-			       "%s: bad tag found on list\n", __FUNCTION__);
-			list_del_init(&rq->queuelist);
-			rq->cmd_flags &= ~REQ_QUEUED;
-		} else
-			blk_queue_end_tag(q, rq);
-
-		rq->cmd_flags &= ~REQ_STARTED;
-		__elv_add_request(q, rq, ELEVATOR_INSERT_BACK, 0);
-	}
+	list_for_each_safe(tmp, n, &q->tag_busy_list)
+		blk_requeue_request(q, list_entry_rq(tmp));
 }
 
 EXPORT_SYMBOL(blk_queue_invalidate_tags);
@@ -1634,15 +1621,7 @@
 {
 	struct request_queue *q = bdi->unplug_io_data;
 
-	/*
-	 * devices don't necessarily have an ->unplug_fn defined
-	 */
-	if (q->unplug_fn) {
-		blk_add_trace_pdu_int(q, BLK_TA_UNPLUG_IO, NULL,
-					q->rq.count[READ] + q->rq.count[WRITE]);
-
-		q->unplug_fn(q);
-	}
+	blk_unplug(q);
 }
 
 static void blk_unplug_work(struct work_struct *work)
@@ -1666,6 +1645,20 @@
 	kblockd_schedule_work(&q->unplug_work);
 }
 
+void blk_unplug(struct request_queue *q)
+{
+	/*
+	 * devices don't necessarily have an ->unplug_fn defined
+	 */
+	if (q->unplug_fn) {
+		blk_add_trace_pdu_int(q, BLK_TA_UNPLUG_IO, NULL,
+					q->rq.count[READ] + q->rq.count[WRITE]);
+
+		q->unplug_fn(q);
+	}
+}
+EXPORT_SYMBOL(blk_unplug);
+
 /**
  * blk_start_queue - restart a previously stopped queue
  * @q:    The &struct request_queue in question
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index da3a08f..b9f923e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -67,7 +67,21 @@
 	  and functions which do not yet exist in /sys.
 
 	  Say N to delete /proc/acpi/ files that have moved to /sys/
+config ACPI_PROCFS_POWER
+	bool "Deprecated power /proc/acpi folders"
+	depends on PROC_FS
+	default y
+	---help---
+	  For backwards compatibility, this option allows
+          deprecated power /proc/acpi/ folders to exist, even when
+          they have been replaced by functions in /sys.
+          The deprecated folders (and their replacements) include:
+	  /proc/acpi/battery/* (/sys/class/power_supply/*)
+	  /proc/acpi/ac_adapter/* (sys/class/power_supply/*)
+	  This option has no effect on /proc/acpi/ folders
+	  and functions, which do not yet exist in /sys
 
+	  Say N to delete power /proc/acpi/ folders that have moved to /sys/
 config ACPI_PROC_EVENT
 	bool "Deprecated /proc/acpi/event support"
 	depends on PROC_FS
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 54e3ab0..456446f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -58,6 +58,6 @@
 obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
-obj-y				+= cm_sbs.o
+obj-$(CONFIG_ACPI_PROCFS_POWER)	+= cm_sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= sbshc.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index e03de37..76ed4f5 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -27,8 +27,10 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#endif
 #include <linux/power_supply.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
@@ -49,12 +51,15 @@
 MODULE_DESCRIPTION("ACPI AC Adapter Driver");
 MODULE_LICENSE("GPL");
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 extern struct proc_dir_entry *acpi_lock_ac_dir(void);
 extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
+static int acpi_ac_open_fs(struct inode *inode, struct file *file);
+#endif
 
 static int acpi_ac_add(struct acpi_device *device);
 static int acpi_ac_remove(struct acpi_device *device, int type);
-static int acpi_ac_open_fs(struct inode *inode, struct file *file);
+static int acpi_ac_resume(struct acpi_device *device);
 
 const static struct acpi_device_id ac_device_ids[] = {
 	{"ACPI0003", 0},
@@ -69,6 +74,7 @@
 	.ops = {
 		.add = acpi_ac_add,
 		.remove = acpi_ac_remove,
+		.resume = acpi_ac_resume,
 		},
 };
 
@@ -80,12 +86,15 @@
 
 #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger);
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 static const struct file_operations acpi_ac_fops = {
 	.open = acpi_ac_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
+#endif
+
 static int get_ac_property(struct power_supply *psy,
 			   enum power_supply_property psp,
 			   union power_supply_propval *val)
@@ -127,6 +136,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -206,6 +216,7 @@
 
 	return 0;
 }
+#endif
 
 /* --------------------------------------------------------------------------
                                    Driver Model
@@ -264,7 +275,9 @@
 	if (result)
 		goto end;
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_ac_add_fs(device);
+#endif
 	if (result)
 		goto end;
 	ac->charger.name = acpi_device_bid(device);
@@ -287,13 +300,30 @@
 
       end:
 	if (result) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_ac_remove_fs(device);
+#endif
 		kfree(ac);
 	}
 
 	return result;
 }
 
+static int acpi_ac_resume(struct acpi_device *device)
+{
+	struct acpi_ac *ac;
+	unsigned old_state;
+	if (!device || !acpi_driver_data(device))
+		return -EINVAL;
+	ac = acpi_driver_data(device);
+	old_state = ac->state;
+	if (acpi_ac_get_state(ac))
+		return 0;
+	if (old_state != ac->state)
+		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
+	return 0;
+}
+
 static int acpi_ac_remove(struct acpi_device *device, int type)
 {
 	acpi_status status = AE_OK;
@@ -309,7 +339,9 @@
 					    ACPI_ALL_NOTIFY, acpi_ac_notify);
 	if (ac->charger.dev)
 		power_supply_unregister(&ac->charger);
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_remove_fs(device);
+#endif
 
 	kfree(ac);
 
@@ -323,13 +355,17 @@
 	if (acpi_disabled)
 		return -ENODEV;
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_dir = acpi_lock_ac_dir();
 	if (!acpi_ac_dir)
 		return -ENODEV;
+#endif
 
 	result = acpi_bus_register_driver(&acpi_ac_driver);
 	if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
 		return -ENODEV;
 	}
 
@@ -341,7 +377,9 @@
 
 	acpi_bus_unregister_driver(&acpi_ac_driver);
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
 
 	return;
 }
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index c2ce0ad..7d6be23 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -31,7 +31,7 @@
 #include <linux/types.h>
 #include <linux/jiffies.h>
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
@@ -63,7 +63,7 @@
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 extern struct proc_dir_entry *acpi_lock_battery_dir(void);
 extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
 
@@ -132,7 +132,7 @@
 	return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
 }
 
-static int acpi_battery_update(struct acpi_battery *battery);
+static int acpi_battery_get_state(struct acpi_battery *battery);
 
 static int acpi_battery_get_property(struct power_supply *psy,
 				     enum power_supply_property psp,
@@ -140,10 +140,11 @@
 {
 	struct acpi_battery *battery = to_acpi_battery(psy);
 
-	if ((!acpi_battery_present(battery)) &&
-	     psp != POWER_SUPPLY_PROP_PRESENT)
+	if (acpi_battery_present(battery)) {
+		/* run battery update only if it is present */
+		acpi_battery_get_state(battery);
+	} else if (psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
-	acpi_battery_update(battery);
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		if (battery->state & 0x01)
@@ -152,6 +153,8 @@
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (battery->state == 0)
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = acpi_battery_present(battery);
@@ -220,7 +223,7 @@
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 inline char *acpi_battery_units(struct acpi_battery *battery)
 {
 	return (battery->power_unit)?"mA":"mW";
@@ -457,6 +460,7 @@
 		return;
 	device_remove_file(battery->bat.dev, &alarm_attr);
 	power_supply_unregister(&battery->bat);
+	battery->bat.dev = NULL;
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)
@@ -477,7 +481,7 @@
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 static struct proc_dir_entry *acpi_battery_dir;
 
 static int acpi_battery_print_info(struct seq_file *seq, int result)
@@ -784,7 +788,7 @@
 	acpi_driver_data(device) = battery;
 	mutex_init(&battery->lock);
 	acpi_battery_update(battery);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
 	if (result)
 		goto end;
@@ -802,7 +806,7 @@
 	       device->status.battery_present ? "present" : "absent");
       end:
 	if (result) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_battery_remove_fs(device);
 #endif
 		kfree(battery);
@@ -821,7 +825,7 @@
 	status = acpi_remove_notify_handler(device->handle,
 					    ACPI_ALL_NOTIFY,
 					    acpi_battery_notify);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_battery_remove_fs(device);
 #endif
 	sysfs_remove_battery(battery);
@@ -857,13 +861,13 @@
 {
 	if (acpi_disabled)
 		return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_battery_dir = acpi_lock_battery_dir();
 	if (!acpi_battery_dir)
 		return -ENODEV;
 #endif
 	if (acpi_bus_register_driver(&acpi_battery_driver) < 0) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
 		return -ENODEV;
@@ -874,7 +878,7 @@
 static void __exit acpi_battery_exit(void)
 {
 	acpi_bus_unregister_driver(&acpi_battery_driver);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
 }
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 06b78e5..d6ddb54 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -75,7 +75,8 @@
 	EC_FLAGS_WAIT_GPE = 0,		/* Don't check status until GPE arrives */
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_MODE,		/* Expect GPE to be sent for status change */
-	EC_FLAGS_ONLY_IBF_GPE,		/* Expect GPE only for IBF = 0 event */
+	EC_FLAGS_NO_ADDRESS_GPE,	/* Expect GPE only for non-address event */
+	EC_FLAGS_ADDRESS,		/* Address is being written */
 };
 
 static int acpi_ec_remove(struct acpi_device *device, int type);
@@ -166,38 +167,45 @@
 
 static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
 {
+	int ret = 0;
+	if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
+		     test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
+		force_poll = 1;
 	if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
 	    likely(!force_poll)) {
 		if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
 				       msecs_to_jiffies(ACPI_EC_DELAY)))
-			return 0;
+			goto end;
 		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		if (acpi_ec_check_status(ec, event)) {
-			if (event == ACPI_EC_EVENT_OBF_1) {
-				/* miss OBF = 1 GPE, don't expect it anymore */
-				printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
-					"switching to degraded mode.\n");
-				set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+			if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
+				/* miss address GPE, don't expect it anymore */
+				printk(KERN_INFO PREFIX "missing address confirmation,"
+					"don't expect it any longer.\n");
+				set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags);
 			} else {
 				/* missing GPEs, switch back to poll mode */
-				printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
+				printk(KERN_INFO PREFIX "missing confirmations,"
 					"switch off interrupt mode.\n");
 				clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 			}
-			return 0;
+			goto end;
 		}
 	} else {
 		unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
 		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		while (time_before(jiffies, delay)) {
 			if (acpi_ec_check_status(ec, event))
-				return 0;
+				goto end;
 		}
 	}
 	printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
 			       " status = %d, expect_event = %d\n",
 			       acpi_ec_read_status(ec), event);
-	return -ETIME;
+	ret = -ETIME;
+      end:
+	clear_bit(EC_FLAGS_ADDRESS, &ec->flags);
+	return ret;
 }
 
 static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
@@ -216,6 +224,9 @@
 			       "write_cmd timeout, command = %d\n", command);
 			goto end;
 		}
+		/* mark the address byte written to EC */
+		if (rdata_len + wdata_len > 1)
+			set_bit(EC_FLAGS_ADDRESS, &ec->flags);
 		set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		acpi_ec_write_data(ec, *(wdata++));
 	}
@@ -231,8 +242,6 @@
 		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
 
 	for (; rdata_len > 0; --rdata_len) {
-		if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
-			force_poll = 1;
 		result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
 		if (result) {
 			printk(KERN_ERR PREFIX "read timeout, command = %d\n",
@@ -881,12 +890,20 @@
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 	} else {
+		/* This workaround is needed only on some broken machines,
+		 * which require early EC, but fail to provide ECDT */
+		acpi_handle x;
 		printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
 		status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
 						boot_ec, NULL);
 		/* Check that acpi_get_devices actually find something */
 		if (ACPI_FAILURE(status) || !boot_ec->handle)
 			goto error;
+		/* We really need to limit this workaround, the only ASUS,
+		 * which needs it, has fake EC._INI method, so use it as flag.
+		 */
+		if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
+			goto error;
 	}
 
 	ret = ec_install_handlers(boot_ec);
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index aabc6ca..e3a673a 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -387,17 +387,14 @@
 	if (!value)
 		value = &dummy;
 
-	switch (width) {
-	case 8:
+	*value = 0;
+	if (width <= 8) {
 		*(u8 *) value = inb(port);
-		break;
-	case 16:
+	} else if (width <= 16) {
 		*(u16 *) value = inw(port);
-		break;
-	case 32:
+	} else if (width <= 32) {
 		*(u32 *) value = inl(port);
-		break;
-	default:
+	} else {
 		BUG();
 	}
 
@@ -408,17 +405,13 @@
 
 acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
 {
-	switch (width) {
-	case 8:
+	if (width <= 8) {
 		outb(value, port);
-		break;
-	case 16:
+	} else if (width <= 16) {
 		outw(value, port);
-		break;
-	case 32:
+	} else if (width <= 32) {
 		outl(value, port);
-		break;
-	default:
+	} else {
 		BUG();
 	}
 
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 235a51e..e93318b 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -612,12 +612,6 @@
 		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
 	}
 
-#ifdef CONFIG_CPU_FREQ
-	acpi_processor_ppc_has_changed(pr);
-#endif
-	acpi_processor_get_throttling_info(pr);
-	acpi_processor_get_limit_info(pr);
-
 	return 0;
 }
 
@@ -665,6 +659,12 @@
 	/* _PDC call should be done before doing anything else (if reqd.). */
 	arch_acpi_processor_init_pdc(pr);
 	acpi_processor_set_pdc(pr);
+#ifdef CONFIG_CPU_FREQ
+	acpi_processor_ppc_has_changed(pr);
+#endif
+	acpi_processor_get_throttling_info(pr);
+	acpi_processor_get_limit_info(pr);
+
 
 	acpi_processor_power_init(pr, device);
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f996d0e..7b6c20e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -197,6 +197,19 @@
 		return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
 }
 
+static void acpi_safe_halt(void)
+{
+	current_thread_info()->status &= ~TS_POLLING;
+	/*
+	 * TS_POLLING-cleared state must be visible before we
+	 * test NEED_RESCHED:
+	 */
+	smp_mb();
+	if (!need_resched())
+		safe_halt();
+	current_thread_info()->status |= TS_POLLING;
+}
+
 #ifndef CONFIG_CPU_IDLE
 
 static void
@@ -239,19 +252,6 @@
 	return;
 }
 
-static void acpi_safe_halt(void)
-{
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();
-	current_thread_info()->status |= TS_POLLING;
-}
-
 static atomic_t c3_cpu_count;
 
 /* Common C-state entry for C2, C3, .. */
@@ -1373,15 +1373,7 @@
 	if (pr->flags.bm_check)
 		acpi_idle_update_bm_rld(pr, cx);
 
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();
-	current_thread_info()->status |= TS_POLLING;
+	acpi_safe_halt();
 
 	cx->usage++;
 
@@ -1399,6 +1391,8 @@
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 	u32 t1, t2;
+	int sleep_ticks = 0;
+
 	pr = processors[smp_processor_id()];
 
 	if (unlikely(!pr))
@@ -1428,6 +1422,8 @@
 		ACPI_FLUSH_CPU_CACHE();
 
 	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	/* Tell the scheduler that we are going deep-idle: */
+	sched_clock_idle_sleep_event();
 	acpi_state_timer_broadcast(pr, cx, 1);
 	acpi_idle_do_entry(cx);
 	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
@@ -1436,6 +1432,10 @@
 	/* TSC could halt in idle, so notify users */
 	mark_tsc_unstable("TSC halts in idle");;
 #endif
+	sleep_ticks = ticks_elapsed(t1, t2);
+
+	/* Tell the scheduler how much we idled: */
+	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 
 	local_irq_enable();
 	current_thread_info()->status |= TS_POLLING;
@@ -1443,7 +1443,7 @@
 	cx->usage++;
 
 	acpi_state_timer_broadcast(pr, cx, 0);
-	cx->time += ticks_elapsed(t1, t2);
+	cx->time += sleep_ticks;
 	return ticks_elapsed_in_us(t1, t2);
 }
 
@@ -1463,6 +1463,8 @@
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 	u32 t1, t2;
+	int sleep_ticks = 0;
+
 	pr = processors[smp_processor_id()];
 
 	if (unlikely(!pr))
@@ -1471,6 +1473,15 @@
 	if (acpi_idle_suspend)
 		return(acpi_idle_enter_c1(dev, state));
 
+	if (acpi_idle_bm_check()) {
+		if (dev->safe_state) {
+			return dev->safe_state->enter(dev, dev->safe_state);
+		} else {
+			acpi_safe_halt();
+			return 0;
+		}
+	}
+
 	local_irq_disable();
 	current_thread_info()->status &= ~TS_POLLING;
 	/*
@@ -1485,38 +1496,45 @@
 		return 0;
 	}
 
+	/* Tell the scheduler that we are going deep-idle: */
+	sched_clock_idle_sleep_event();
 	/*
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
 	 */
 	acpi_state_timer_broadcast(pr, cx, 1);
 
-	if (acpi_idle_bm_check()) {
-		cx = pr->power.bm_state;
+	acpi_idle_update_bm_rld(pr, cx);
 
-		acpi_idle_update_bm_rld(pr, cx);
-
-		t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-		acpi_idle_do_entry(cx);
-		t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-	} else {
-		acpi_idle_update_bm_rld(pr, cx);
-
+	/*
+	 * disable bus master
+	 * bm_check implies we need ARB_DIS
+	 * !bm_check implies we need cache flush
+	 * bm_control implies whether we can do ARB_DIS
+	 *
+	 * That leaves a case where bm_check is set and bm_control is
+	 * not set. In that case we cannot do much, we enter C3
+	 * without doing anything.
+	 */
+	if (pr->flags.bm_check && pr->flags.bm_control) {
 		spin_lock(&c3_lock);
 		c3_cpu_count++;
 		/* Disable bus master arbitration when all CPUs are in C3 */
 		if (c3_cpu_count == num_online_cpus())
 			acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
 		spin_unlock(&c3_lock);
+	} else if (!pr->flags.bm_check) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
-		t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-		acpi_idle_do_entry(cx);
-		t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	acpi_idle_do_entry(cx);
+	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 
+	/* Re-enable bus master arbitration */
+	if (pr->flags.bm_check && pr->flags.bm_control) {
 		spin_lock(&c3_lock);
-		/* Re-enable bus master arbitration */
-		if (c3_cpu_count == num_online_cpus())
-			acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
+		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
 		c3_cpu_count--;
 		spin_unlock(&c3_lock);
 	}
@@ -1525,6 +1543,9 @@
 	/* TSC could halt in idle, so notify users */
 	mark_tsc_unstable("TSC halts in idle");
 #endif
+	sleep_ticks = ticks_elapsed(t1, t2);
+	/* Tell the scheduler how much we idled: */
+	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 
 	local_irq_enable();
 	current_thread_info()->status |= TS_POLLING;
@@ -1532,7 +1553,7 @@
 	cx->usage++;
 
 	acpi_state_timer_broadcast(pr, cx, 0);
-	cx->time += ticks_elapsed(t1, t2);
+	cx->time += sleep_ticks;
 	return ticks_elapsed_in_us(t1, t2);
 }
 
@@ -1584,12 +1605,14 @@
 			case ACPI_STATE_C1:
 			state->flags |= CPUIDLE_FLAG_SHALLOW;
 			state->enter = acpi_idle_enter_c1;
+			dev->safe_state = state;
 			break;
 
 			case ACPI_STATE_C2:
 			state->flags |= CPUIDLE_FLAG_BALANCED;
 			state->flags |= CPUIDLE_FLAG_TIME_VALID;
 			state->enter = acpi_idle_enter_simple;
+			dev->safe_state = state;
 			break;
 
 			case ACPI_STATE_C3:
@@ -1610,14 +1633,6 @@
 	if (!count)
 		return -EINVAL;
 
-	/* find the deepest state that can handle active BM */
-	if (pr->flags.bm_check) {
-		for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++)
-			if (pr->power.states[i].type == ACPI_STATE_C3)
-				break;
-		pr->power.bm_state = &pr->power.states[i-1];
-	}
-
 	return 0;
 }
 
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 0b8204e..c26c61f 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -70,7 +70,55 @@
 
 int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 {
-	return acpi_processor_get_platform_limit(pr);
+	int result = 0;
+	int throttling_limit;
+	int current_state;
+	struct acpi_processor_limit *limit;
+	int target_state;
+
+	result = acpi_processor_get_platform_limit(pr);
+	if (result) {
+		/* Throttling Limit is unsupported */
+		return result;
+	}
+
+	throttling_limit = pr->throttling_platform_limit;
+	if (throttling_limit >= pr->throttling.state_count) {
+		/* Uncorrect Throttling Limit */
+		return -EINVAL;
+	}
+
+	current_state = pr->throttling.state;
+	if (current_state > throttling_limit) {
+		/*
+		 * The current state can meet the requirement of
+		 * _TPC limit. But it is reasonable that OSPM changes
+		 * t-states from high to low for better performance.
+		 * Of course the limit condition of thermal
+		 * and user should be considered.
+		 */
+		limit = &pr->limit;
+		target_state = throttling_limit;
+		if (limit->thermal.tx > target_state)
+			target_state = limit->thermal.tx;
+		if (limit->user.tx > target_state)
+			target_state = limit->user.tx;
+	} else if (current_state == throttling_limit) {
+		/*
+		 * Unnecessary to change the throttling state
+		 */
+		return 0;
+	} else {
+		/*
+		 * If the current state is lower than the limit of _TPC, it
+		 * will be forced to switch to the throttling state defined
+		 * by throttling_platfor_limit.
+		 * Because the previous state meets with the limit condition
+		 * of thermal and user, it is unnecessary to check it again.
+		 */
+		target_state = throttling_limit;
+	}
+	return acpi_processor_set_throttling(pr, target_state);
 }
 
 /*
@@ -83,6 +131,7 @@
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *ptc = NULL;
 	union acpi_object obj = { 0 };
+	struct acpi_processor_throttling *throttling;
 
 	status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
@@ -134,6 +183,22 @@
 	memcpy(&pr->throttling.status_register, obj.buffer.pointer,
 	       sizeof(struct acpi_ptc_register));
 
+	throttling = &pr->throttling;
+
+	if ((throttling->control_register.bit_width +
+		throttling->control_register.bit_offset) > 32) {
+		printk(KERN_ERR PREFIX "Invalid _PTC control register\n");
+		result = -EFAULT;
+		goto end;
+	}
+
+	if ((throttling->status_register.bit_width +
+		throttling->status_register.bit_offset) > 32) {
+		printk(KERN_ERR PREFIX "Invalid _PTC status register\n");
+		result = -EFAULT;
+		goto end;
+	}
+
       end:
 	kfree(buffer.pointer);
 
@@ -328,44 +393,132 @@
 	return 0;
 }
 
-static int acpi_read_throttling_status(struct acpi_processor_throttling
-				       *throttling)
+#ifdef CONFIG_X86
+static int acpi_throttling_rdmsr(struct acpi_processor *pr,
+					acpi_integer * value)
 {
-	int value = -1;
+	struct cpuinfo_x86 *c;
+	u64 msr_high, msr_low;
+	unsigned int cpu;
+	u64 msr = 0;
+	int ret = -1;
+
+	cpu = pr->id;
+	c = &cpu_data(cpu);
+
+	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+		!cpu_has(c, X86_FEATURE_ACPI)) {
+		printk(KERN_ERR PREFIX
+			"HARDWARE addr space,NOT supported yet\n");
+	} else {
+		msr_low = 0;
+		msr_high = 0;
+		rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL,
+			(u32 *)&msr_low , (u32 *) &msr_high);
+		msr = (msr_high << 32) | msr_low;
+		*value = (acpi_integer) msr;
+		ret = 0;
+	}
+	return ret;
+}
+
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
+{
+	struct cpuinfo_x86 *c;
+	unsigned int cpu;
+	int ret = -1;
+	u64 msr;
+
+	cpu = pr->id;
+	c = &cpu_data(cpu);
+
+	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
+		!cpu_has(c, X86_FEATURE_ACPI)) {
+		printk(KERN_ERR PREFIX
+			"HARDWARE addr space,NOT supported yet\n");
+	} else {
+		msr = value;
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL,
+			msr & 0xffffffff, msr >> 32);
+		ret = 0;
+	}
+	return ret;
+}
+#else
+static int acpi_throttling_rdmsr(struct acpi_processor *pr,
+				acpi_integer * value)
+{
+	printk(KERN_ERR PREFIX
+		"HARDWARE addr space,NOT supported yet\n");
+	return -1;
+}
+
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
+{
+	printk(KERN_ERR PREFIX
+		"HARDWARE addr space,NOT supported yet\n");
+	return -1;
+}
+#endif
+
+static int acpi_read_throttling_status(struct acpi_processor *pr,
+					acpi_integer *value)
+{
+	u32 bit_width, bit_offset;
+	u64 ptc_value;
+	u64 ptc_mask;
+	struct acpi_processor_throttling *throttling;
+	int ret = -1;
+
+	throttling = &pr->throttling;
 	switch (throttling->status_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
+		ptc_value = 0;
+		bit_width = throttling->status_register.bit_width;
+		bit_offset = throttling->status_register.bit_offset;
+
 		acpi_os_read_port((acpi_io_address) throttling->status_register.
-				  address, &value,
-				  (u32) throttling->status_register.bit_width *
-				  8);
+				  address, (u32 *) &ptc_value,
+				  (u32) (bit_width + bit_offset));
+		ptc_mask = (1 << bit_width) - 1;
+		*value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask);
+		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		printk(KERN_ERR PREFIX
-		       "HARDWARE addr space,NOT supported yet\n");
+		ret = acpi_throttling_rdmsr(pr, value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
 		       (u32) (throttling->status_register.space_id));
 	}
-	return value;
+	return ret;
 }
 
-static int acpi_write_throttling_state(struct acpi_processor_throttling
-				       *throttling, int value)
+static int acpi_write_throttling_state(struct acpi_processor *pr,
+				acpi_integer value)
 {
+	u32 bit_width, bit_offset;
+	u64 ptc_value;
+	u64 ptc_mask;
+	struct acpi_processor_throttling *throttling;
 	int ret = -1;
 
+	throttling = &pr->throttling;
 	switch (throttling->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
+		bit_width = throttling->control_register.bit_width;
+		bit_offset = throttling->control_register.bit_offset;
+		ptc_mask = (1 << bit_width) - 1;
+		ptc_value = value & ptc_mask;
+
 		acpi_os_write_port((acpi_io_address) throttling->
-				   control_register.address, value,
-				   (u32) throttling->control_register.
-				   bit_width * 8);
+					control_register.address,
+					(u32) (ptc_value << bit_offset),
+					(u32) (bit_width + bit_offset));
 		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		printk(KERN_ERR PREFIX
-		       "HARDWARE addr space,NOT supported yet\n");
+		ret = acpi_throttling_wrmsr(pr, value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@@ -374,7 +527,8 @@
 	return ret;
 }
 
-static int acpi_get_throttling_state(struct acpi_processor *pr, int value)
+static int acpi_get_throttling_state(struct acpi_processor *pr,
+				acpi_integer value)
 {
 	int i;
 
@@ -390,22 +544,26 @@
 	return i;
 }
 
-static int acpi_get_throttling_value(struct acpi_processor *pr, int state)
+static int acpi_get_throttling_value(struct acpi_processor *pr,
+			int state, acpi_integer *value)
 {
-	int value = -1;
+	int ret = -1;
+
 	if (state >= 0 && state <= pr->throttling.state_count) {
 		struct acpi_processor_tx_tss *tx =
 		    (struct acpi_processor_tx_tss *)&(pr->throttling.
 						      states_tss[state]);
-		value = tx->control;
+		*value = tx->control;
+		ret = 0;
 	}
-	return value;
+	return ret;
 }
 
 static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 {
 	int state = 0;
-	u32 value = 0;
+	int ret;
+	acpi_integer value;
 
 	if (!pr)
 		return -EINVAL;
@@ -415,8 +573,9 @@
 
 	pr->throttling.state = 0;
 	local_irq_disable();
-	value = acpi_read_throttling_status(&pr->throttling);
-	if (value >= 0) {
+	value = 0;
+	ret = acpi_read_throttling_status(pr, &value);
+	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
 		pr->throttling.state = state;
 	}
@@ -430,6 +589,40 @@
 	return pr->throttling.acpi_processor_get_throttling(pr);
 }
 
+static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
+{
+	int i, step;
+
+	if (!pr->throttling.address) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
+		return -EINVAL;
+	} else if (!pr->throttling.duty_width) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
+		return -EINVAL;
+	}
+	/* TBD: Support duty_cycle values that span bit 4. */
+	else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
+		printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n");
+		return -EINVAL;
+	}
+
+	pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
+
+	/*
+	 * Compute state values. Note that throttling displays a linear power
+	 * performance relationship (at 50% performance the CPU will consume
+	 * 50% power).  Values are in 1/10th of a percent to preserve accuracy.
+	 */
+
+	step = (1000 / pr->throttling.state_count);
+
+	for (i = 0; i < pr->throttling.state_count; i++) {
+		pr->throttling.states[i].performance = 1000 - step * i;
+		pr->throttling.states[i].power = 1000 - step * i;
+	}
+	return 0;
+}
+
 static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
 					      int state)
 {
@@ -506,7 +699,8 @@
 static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 					     int state)
 {
-	u32 value = 0;
+	int ret;
+	acpi_integer value;
 
 	if (!pr)
 		return -EINVAL;
@@ -524,10 +718,10 @@
 		return -EPERM;
 
 	local_irq_disable();
-
-	value = acpi_get_throttling_value(pr, state);
-	if (value >= 0) {
-		acpi_write_throttling_state(&pr->throttling, value);
+	value = 0;
+	ret = acpi_get_throttling_value(pr, state, &value);
+	if (ret >= 0) {
+		acpi_write_throttling_state(pr, value);
 		pr->throttling.state = state;
 	}
 	local_irq_enable();
@@ -543,8 +737,6 @@
 int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 {
 	int result = 0;
-	int step = 0;
-	int i = 0;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
@@ -563,6 +755,8 @@
 		acpi_processor_get_throttling_states(pr) ||
 		acpi_processor_get_platform_limit(pr))
 	{
+		if (acpi_processor_get_fadt_info(pr))
+			return 0;
 		pr->throttling.acpi_processor_get_throttling =
 		    &acpi_processor_get_throttling_fadt;
 		pr->throttling.acpi_processor_set_throttling =
@@ -576,19 +770,6 @@
 
 	acpi_processor_get_tsd(pr);
 
-	if (!pr->throttling.address) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
-		return 0;
-	} else if (!pr->throttling.duty_width) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
-		return 0;
-	}
-	/* TBD: Support duty_cycle values that span bit 4. */
-	else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) {
-		printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n");
-		return 0;
-	}
-
 	/*
 	 * PIIX4 Errata: We don't support throttling on the original PIIX4.
 	 * This shouldn't be an issue as few (if any) mobile systems ever
@@ -600,21 +781,6 @@
 		return 0;
 	}
 
-	pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
-
-	/*
-	 * Compute state values. Note that throttling displays a linear power/
-	 * performance relationship (at 50% performance the CPU will consume
-	 * 50% power).  Values are in 1/10th of a percent to preserve accuracy.
-	 */
-
-	step = (1000 / pr->throttling.state_count);
-
-	for (i = 0; i < pr->throttling.state_count; i++) {
-		pr->throttling.states[i].performance = step * i;
-		pr->throttling.states[i].power = step * i;
-	}
-
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
 			  pr->throttling.state_count));
 
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 90fd09c..6045cdb 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -29,7 +29,7 @@
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
@@ -88,7 +88,7 @@
 struct acpi_battery {
 	struct power_supply bat;
 	struct acpi_sbs *sbs;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	struct proc_dir_entry *proc_entry;
 #endif
 	unsigned long update_time;
@@ -113,6 +113,7 @@
 	u16 spec;
 	u8 id;
 	u8 present:1;
+	u8 have_sysfs_alarm:1;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -122,7 +123,7 @@
 	struct acpi_device *device;
 	struct acpi_smb_hc *hc;
 	struct mutex lock;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	struct proc_dir_entry *charger_entry;
 #endif
 	struct acpi_battery battery[MAX_SBS_BAT];
@@ -468,7 +469,7 @@
                               FS Interface (/proc/acpi)
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 /* Generic Routines */
 static int
 acpi_sbs_add_fs(struct proc_dir_entry **dir,
@@ -789,7 +790,7 @@
 		return result;
 
 	sprintf(battery->name, ACPI_BATTERY_DIR_NAME, id);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_sbs_add_fs(&battery->proc_entry, acpi_battery_dir,
 			battery->name, &acpi_battery_info_fops,
 			&acpi_battery_state_fops, &acpi_battery_alarm_fops,
@@ -808,7 +809,13 @@
 	}
 	battery->bat.get_property = acpi_sbs_battery_get_property;
 	result = power_supply_register(&sbs->device->dev, &battery->bat);
-	device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	result = device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	battery->have_sysfs_alarm = 1;
+      end:
 	printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
 	       ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
 	       battery->name, sbs->battery->present ? "present" : "absent");
@@ -817,14 +824,16 @@
 
 static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
 {
-	if (sbs->battery[id].bat.dev)
-		device_remove_file(sbs->battery[id].bat.dev, &alarm_attr);
-		power_supply_unregister(&sbs->battery[id].bat);
-#ifdef CONFIG_ACPI_PROCFS
-	if (sbs->battery[id].proc_entry) {
-		acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry),
-				   acpi_battery_dir);
+	struct acpi_battery *battery = &sbs->battery[id];
+
+	if (battery->bat.dev) {
+		if (battery->have_sysfs_alarm)
+			device_remove_file(battery->bat.dev, &alarm_attr);
+		power_supply_unregister(&battery->bat);
 	}
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	if (battery->proc_entry)
+		acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
 #endif
 }
 
@@ -835,7 +844,7 @@
 	result = acpi_ac_get_present(sbs);
 	if (result)
 		goto end;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_sbs_add_fs(&sbs->charger_entry, acpi_ac_dir,
 				 ACPI_AC_DIR_NAME, NULL,
 				 &acpi_ac_state_fops, NULL, sbs);
@@ -859,7 +868,7 @@
 {
 	if (sbs->charger.dev)
 		power_supply_unregister(&sbs->charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	if (sbs->charger_entry)
 		acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
 #endif
@@ -965,7 +974,7 @@
 
 static void acpi_sbs_rmdirs(void)
 {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	if (acpi_ac_dir) {
 		acpi_unlock_ac_dir(acpi_ac_dir);
 		acpi_ac_dir = NULL;
@@ -1004,7 +1013,7 @@
 
 	if (acpi_disabled)
 		return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_dir = acpi_lock_ac_dir();
 	if (!acpi_ac_dir)
 		return -ENODEV;
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index a736ef7..9e8c20c 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -591,9 +591,12 @@
 						NULL,
 						&toshiba_backlight_data);
         if (IS_ERR(toshiba_backlight_device)) {
+		int ret = PTR_ERR(toshiba_backlight_device);
+
 		printk(KERN_ERR "Could not register toshiba backlight device\n");
 		toshiba_backlight_device = NULL;
 		toshiba_acpi_exit();
+		return ret;
 	}
         toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a4b2cb2..328ce8a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -621,6 +621,7 @@
 static const struct ich_laptop ich_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
+	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
@@ -959,6 +960,13 @@
 			},
 		},
 		{
+			.ident = "Satellite Pro U200",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE PRO U200"),
+			},
+		},
+		{
 			.ident = "Satellite U205",
 			.matches = {
 				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 08a52dd..545ea86 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -312,7 +312,7 @@
  *
  * RETURNS:
  * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
- * contain valid data.  -errno on other errors.
+ * contain valid data.
  */
 static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 			   void **ptr_to_free)
@@ -339,7 +339,6 @@
 			ata_dev_printk(dev, KERN_WARNING,
 				       "_GTF evaluation failed (AE 0x%x)\n",
 				       status);
-			rc = -EIO;
 		}
 		goto out_free;
 	}
@@ -359,7 +358,6 @@
 		ata_dev_printk(dev, KERN_WARNING,
 			       "_GTF unexpected object type 0x%x\n",
 			       out_obj->type);
-		rc = -EINVAL;
 		goto out_free;
 	}
 
@@ -367,7 +365,6 @@
 		ata_dev_printk(dev, KERN_WARNING,
 			       "unexpected _GTF length (%d)\n",
 			       out_obj->buffer.length);
-		rc = -EINVAL;
 		goto out_free;
 	}
 
@@ -511,10 +508,7 @@
 	int gtf_count, i, rc;
 
 	/* get taskfiles */
-	rc = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
-	if (rc < 0)
-		return rc;
-	gtf_count = rc;
+	gtf_count = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
 
 	/* execute them */
 	for (i = 0, rc = 0; i < gtf_count; i++) {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 164c7d9..81898036db 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -676,10 +676,11 @@
 		if (rc)
 			return rc;
 
-		/* disable DIPM */
-		if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_DISABLE, SATA_DIPM);
+		/*
+		 * we don't have to disable DIPM since IPM flags
+		 * disallow transitions to SLUMBER, which effectively
+		 * disable DIPM if it does not support PARTIAL
+		 */
 		break;
 	case NOT_AVAILABLE:
 	case MAX_PERFORMANCE:
@@ -689,10 +690,11 @@
 		if (rc)
 			return rc;
 
-		/* disable DIPM */
-		if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_DISABLE, SATA_DIPM);
+		/*
+		 * we don't have to disable DIPM since IPM flags
+		 * disallow all transitions which effectively
+		 * disable DIPM anyway.
+		 */
 		break;
 	}
 
@@ -3371,14 +3373,20 @@
 	 * to clear 0xff after reset.  For example, HHD424020F7SV00
 	 * iVDR needs >= 800ms while.  Quantum GoVault needs even more
 	 * than that.
+	 *
+	 * Note that some PATA controllers (pata_ali) explode if
+	 * status register is read more than once when there's no
+	 * device attached.
 	 */
-	while (1) {
-		u8 status = ata_chk_status(ap);
+	if (ap->flags & ATA_FLAG_SATA) {
+		while (1) {
+			u8 status = ata_chk_status(ap);
 
-		if (status != 0xff || time_after(jiffies, deadline))
-			return;
+			if (status != 0xff || time_after(jiffies, deadline))
+				return;
 
-		msleep(50);
+			msleep(50);
+		}
 	}
 }
 
@@ -4239,6 +4247,10 @@
 	{ "ST340823A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
 	{ "ST320413A",		NULL,		ATA_HORKAGE_HPA_SIZE, },
 
+	/* Devices which get the IVB wrong */
+	{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
+	{ "TSSTcorp CDDVDW SH-S202J", "SB00",	  ATA_HORKAGE_IVB, },
+
 	/* End Marker */
 	{ }
 };
@@ -4300,6 +4312,21 @@
 }
 
 /**
+ *	ata_is_40wire		-	check drive side detection
+ *	@dev: device
+ *
+ *	Perform drive side detection decoding, allowing for device vendors
+ *	who can't follow the documentation.
+ */
+
+static int ata_is_40wire(struct ata_device *dev)
+{
+	if (dev->horkage & ATA_HORKAGE_IVB)
+		return ata_drive_40wire_relaxed(dev->id);
+	return ata_drive_40wire(dev->id);
+}
+
+/**
  *	ata_dev_xfermask - Compute supported xfermask of the given device
  *	@dev: Device to compute xfermask for
  *
@@ -4368,7 +4395,7 @@
 	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
 		/* UDMA/44 or higher would be available */
 		if ((ap->cbl == ATA_CBL_PATA40) ||
-		    (ata_drive_40wire(dev->id) &&
+		    (ata_is_40wire(dev) &&
 		    (ap->cbl == ATA_CBL_PATA_UNK ||
 		     ap->cbl == ATA_CBL_PATA80))) {
 			ata_dev_printk(dev, KERN_WARNING,
@@ -6800,19 +6827,6 @@
 		if (!ap)
 			continue;
 
-		if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop)
-			ap->ops->port_stop(ap);
-	}
-
-	if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop)
-		host->ops->host_stop(host);
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		if (!ap)
-			continue;
-
 		if (ap->scsi_host)
 			scsi_host_put(ap->scsi_host);
 
@@ -6939,6 +6953,24 @@
 	return host;
 }
 
+static void ata_host_stop(struct device *gendev, void *res)
+{
+	struct ata_host *host = dev_get_drvdata(gendev);
+	int i;
+
+	WARN_ON(!(host->flags & ATA_HOST_STARTED));
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (ap->ops->port_stop)
+			ap->ops->port_stop(ap);
+	}
+
+	if (host->ops->host_stop)
+		host->ops->host_stop(host);
+}
+
 /**
  *	ata_host_start - start and freeze ports of an ATA host
  *	@host: ATA host to start ports for
@@ -6957,6 +6989,8 @@
  */
 int ata_host_start(struct ata_host *host)
 {
+	int have_stop = 0;
+	void *start_dr = NULL;
 	int i, rc;
 
 	if (host->flags & ATA_HOST_STARTED)
@@ -6968,6 +7002,22 @@
 		if (!host->ops && !ata_port_is_dummy(ap))
 			host->ops = ap->ops;
 
+		if (ap->ops->port_stop)
+			have_stop = 1;
+	}
+
+	if (host->ops->host_stop)
+		have_stop = 1;
+
+	if (have_stop) {
+		start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
+		if (!start_dr)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
 		if (ap->ops->port_start) {
 			rc = ap->ops->port_start(ap);
 			if (rc) {
@@ -6980,6 +7030,8 @@
 		ata_eh_freeze_port(ap);
 	}
 
+	if (start_dr)
+		devres_add(host->dev, start_dr);
 	host->flags |= ATA_HOST_STARTED;
 	return 0;
 
@@ -6990,6 +7042,7 @@
 		if (ap->ops->port_stop)
 			ap->ops->port_stop(ap);
 	}
+	devres_free(start_dr);
 	return rc;
 }
 
@@ -7157,6 +7210,10 @@
  *	request IRQ and register it.  This helper takes necessasry
  *	arguments and performs the three steps in one go.
  *
+ *	An invalid IRQ skips the IRQ registration and expects the host to
+ *	have set polling mode on the port. In this case, @irq_handler
+ *	should be NULL.
+ *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
  *
@@ -7173,6 +7230,12 @@
 	if (rc)
 		return rc;
 
+	/* Special case for polling mode */
+	if (!irq) {
+		WARN_ON(irq_handler);
+		return ata_host_register(host, sht);
+	}
+
 	rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
 			      dev_driver_string(host->dev), host);
 	if (rc)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index e61cb1f..3816b86 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -295,7 +295,7 @@
 
 static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 {
-	if (adev->class != ATA_DEV_ATA) {
+	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~ (0x1F << ATA_SHIFT_UDMA);
 	}
@@ -359,28 +359,25 @@
 		{ 0x50, 1, 0x04, 0x04 },
 		{ 0x54, 1, 0x04, 0x04 }
 	};
-	u16 mcr3, mcr6;
+	u16 mcr3;
 	u8 ata66;
 	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	unsigned int mcrbase = 0x50 + 4 * ap->port_no;
 
 	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
 		return -ENOENT;
 
 	/* Do the extra channel work */
-	pci_read_config_word(pdev, 0x52, &mcr3);
-	pci_read_config_word(pdev, 0x56, &mcr6);
+	pci_read_config_word(pdev, mcrbase + 2, &mcr3);
 	/* Set bit 15 of 0x52 to enable TCBLID as input
-	   Set bit 15 of 0x56 to enable FCBLID as input
 	 */
-	pci_write_config_word(pdev, 0x52, mcr3 | 0x8000);
-	pci_write_config_word(pdev, 0x56, mcr6 | 0x8000);
+	pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
 	pci_read_config_byte(pdev, 0x5A, &ata66);
 	/* Reset TCBLID/FCBLID to output */
 	pci_write_config_word(pdev, 0x52, mcr3);
-	pci_write_config_word(pdev, 0x56, mcr6);
 
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & (2 >> ap->port_no))
 		ap->cbl = ATA_CBL_PATA40;
 	else
 		ap->cbl = ATA_CBL_PATA80;
@@ -844,6 +841,25 @@
 	/* Never went stable */
 	return 0;
 }
+
+static u32 hpt374_read_freq(struct pci_dev *pdev)
+{
+	u32 freq;
+	unsigned long io_base = pci_resource_start(pdev, 4);
+	if (PCI_FUNC(pdev->devfn) & 1) {
+		struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1);
+		/* Someone hot plugged the controller on us ? */
+		if (pdev_0 == NULL)
+			return 0;
+		io_base = pci_resource_start(pdev_0, 4);
+		freq = inl(io_base + 0x90);
+		pci_dev_put(pdev_0);
+	}
+	else
+		freq = inl(io_base + 0x90);
+	return freq;
+}
+
 /**
  *	hpt37x_init_one		-	Initialise an HPT37X/302
  *	@dev: PCI device
@@ -902,7 +918,7 @@
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x0f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
@@ -911,7 +927,7 @@
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x0f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT371, 372 and friends - UDMA133 */
@@ -1047,9 +1063,16 @@
 		outb(0x0e, iobase + 0x9c);
 
 	/* Some devices do not let this value be accessed via PCI space
-	   according to the old driver */
+	   according to the old driver. In addition we must use the value
+	   from FN 0 on the HPT374 */
 
-	freq = inl(iobase + 0x90);
+	if (chip_table == &hpt374) {
+		freq = hpt374_read_freq(dev);
+		if (freq == 0)
+			return -ENODEV;
+	} else
+		freq = inl(iobase + 0x90);
+
 	if ((freq >> 12) != 0xABCDE) {
 		int i;
 		u8 sr;
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index fc72a96..ac03a90 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -1,7 +1,7 @@
 /*
  * Generic platform device PATA driver
  *
- * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2006 - 2007  Paul Mundt
  *
  * Based on pata_pcmcia:
  *
@@ -22,7 +22,7 @@
 #include <linux/pata_platform.h>
 
 #define DRV_NAME "pata_platform"
-#define DRV_VERSION "1.1"
+#define DRV_VERSION "1.2"
 
 static int pio_mask = 1;
 
@@ -120,15 +120,20 @@
  *	Register a platform bus IDE interface. Such interfaces are PIO and we
  *	assume do not support IRQ sharing.
  *
- *	Platform devices are expected to contain 3 resources per port:
+ *	Platform devices are expected to contain at least 2 resources per port:
  *
  *		- I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
  *		- CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
+ *
+ *	and optionally:
+ *
  *		- IRQ	   (IORESOURCE_IRQ)
  *
  *	If the base resources are both mem types, the ioremap() is handled
  *	here. For IORESOURCE_IO, it's assumed that there's no remapping
  *	necessary.
+ *
+ *	If no IRQ resource is present, PIO polling mode is used instead.
  */
 static int __devinit pata_platform_probe(struct platform_device *pdev)
 {
@@ -137,11 +142,12 @@
 	struct ata_port *ap;
 	struct pata_platform_info *pp_info;
 	unsigned int mmio;
+	int irq;
 
 	/*
 	 * Simple resource validation ..
 	 */
-	if (unlikely(pdev->num_resources != 3)) {
+	if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
 		dev_err(&pdev->dev, "invalid number of resources\n");
 		return -EINVAL;
 	}
@@ -173,6 +179,13 @@
 		(ctl_res->flags == IORESOURCE_MEM));
 
 	/*
+	 * And the IRQ
+	 */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		irq = 0;	/* no irq */
+
+	/*
 	 * Now that that's out of the way, wire up the port..
 	 */
 	host = ata_host_alloc(&pdev->dev, 1);
@@ -185,6 +198,14 @@
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	/*
+	 * Use polling mode if there's no IRQ
+	 */
+	if (!irq) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
+
+	/*
 	 * Handle the MMIO case
 	 */
 	if (mmio) {
@@ -213,9 +234,9 @@
 		      (unsigned long long)ctl_res->start);
 
 	/* activate */
-	return ata_host_activate(host, platform_get_irq(pdev, 0),
-				 ata_interrupt, pp_info ? pp_info->irq_flags
-				 : 0, &pata_platform_sht);
+	return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
+				 pp_info ? pp_info->irq_flags : 0,
+				 &pata_platform_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index df68806..8bed888 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -274,28 +274,27 @@
 {
 	static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
 	int offset = 1 + 2 * ap->port_no - adev->devno;
-	int devbits = (2 * ap->port_no + adev->devno);
+	int devbits = 2 * ap->port_no + adev->devno;
 	u8 ultra;
 	u8 ultra_cfg;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	pci_read_config_byte(pdev, 0x54, &ultra_cfg);
+	pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
+	ultra &= ~(0x0F << (adev->devno * 4));
 
 	if (adev->dma_mode >= XFER_UDMA_0) {
 		pci_write_config_byte(pdev, 0x44 + offset,  0x20);
 
-		pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
-		ultra &= ~(0x0F << (ap->port_no * 4));
 		ultra |= (adev->dma_mode - XFER_UDMA_0)
-					<< (ap->port_no * 4);
-		pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
-
+					<< (adev->devno * 4);
 		ultra_cfg |=  (1 << devbits);
 	} else {
 		pci_write_config_byte(pdev, 0x44 + offset,
 			dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
 		ultra_cfg &= ~(1 << devbits);
 	}
+	pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
 	pci_write_config_byte(pdev, 0x54, ultra_cfg);
 }
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 35b2df2..44f9e5d 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1629,7 +1629,7 @@
 
 	/* SATA hardreset fails to retrieve proper device signature on
 	 * some controllers.  Don't classify on hardreset.  For more
-	 * info, see http://bugme.osdl.org/show_bug.cgi?id=3352
+	 * info, see http://bugzilla.kernel.org/show_bug.cgi?id=3352
 	 */
 	return sata_std_hardreset(link, &dummy, deadline);
 }
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 6d43ba7..2f1de6e 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -103,7 +103,7 @@
 	QS_DMA_BOUNDARY		= ~0UL
 };
 
-typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
+typedef enum { qs_state_mmio, qs_state_pkt } qs_state_t;
 
 struct qs_port_priv {
 	u8			*pkt;
@@ -116,14 +116,15 @@
 static int qs_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int qs_port_start(struct ata_port *ap);
 static void qs_host_stop(struct ata_host *host);
-static void qs_phy_reset(struct ata_port *ap);
 static void qs_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
 static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
 static void qs_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 qs_bmdma_status(struct ata_port *ap);
 static void qs_irq_clear(struct ata_port *ap);
-static void qs_eng_timeout(struct ata_port *ap);
+static void qs_freeze(struct ata_port *ap);
+static void qs_thaw(struct ata_port *ap);
+static void qs_error_handler(struct ata_port *ap);
 
 static struct scsi_host_template qs_ata_sht = {
 	.module			= THIS_MODULE,
@@ -150,11 +151,12 @@
 	.check_atapi_dma	= qs_check_atapi_dma,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.phy_reset		= qs_phy_reset,
 	.qc_prep		= qs_qc_prep,
 	.qc_issue		= qs_qc_issue,
 	.data_xfer		= ata_data_xfer,
-	.eng_timeout		= qs_eng_timeout,
+	.freeze			= qs_freeze,
+	.thaw			= qs_thaw,
+	.error_handler		= qs_error_handler,
 	.irq_clear		= qs_irq_clear,
 	.irq_on			= ata_irq_on,
 	.scr_read		= qs_scr_read,
@@ -169,8 +171,6 @@
 	/* board_2068_idx */
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET |
-				  //FIXME ATA_FLAG_SRST |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
 		.pio_mask	= 0x10, /* pio4 */
 		.udma_mask	= ATA_UDMA6,
@@ -219,7 +219,9 @@
 static inline void qs_enter_reg_mode(struct ata_port *ap)
 {
 	u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
+	struct qs_port_priv *pp = ap->private_data;
 
+	pp->state = qs_state_mmio;
 	writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
 	readb(chan + QS_CCT_CTR0);        /* flush */
 }
@@ -233,23 +235,28 @@
 	qs_enter_reg_mode(ap);
 }
 
-static void qs_phy_reset(struct ata_port *ap)
+static void qs_freeze(struct ata_port *ap)
 {
-	struct qs_port_priv *pp = ap->private_data;
+	u8 __iomem *mmio_base = qs_mmio_base(ap->host);
 
-	pp->state = qs_state_idle;
-	qs_reset_channel_logic(ap);
-	sata_phy_reset(ap);
+	writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
+	qs_enter_reg_mode(ap);
 }
 
-static void qs_eng_timeout(struct ata_port *ap)
+static void qs_thaw(struct ata_port *ap)
 {
-	struct qs_port_priv *pp = ap->private_data;
+	u8 __iomem *mmio_base = qs_mmio_base(ap->host);
 
-	if (pp->state != qs_state_idle) /* healthy paranoia */
-		pp->state = qs_state_mmio;
+	qs_enter_reg_mode(ap);
+	writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
+}
+
+static int qs_prereset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+
 	qs_reset_channel_logic(ap);
-	ata_eng_timeout(ap);
+	return ata_std_prereset(link, deadline);
 }
 
 static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -260,6 +267,13 @@
 	return 0;
 }
 
+static void qs_error_handler(struct ata_port *ap)
+{
+	qs_enter_reg_mode(ap);
+	ata_do_eh(ap, qs_prereset, ata_std_softreset, NULL,
+		  ata_std_postreset);
+}
+
 static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
 {
 	if (sc_reg > SCR_CONTROL)
@@ -358,7 +372,6 @@
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_DMA:
-
 		pp->state = qs_state_pkt;
 		qs_packet_start(qc);
 		return 0;
@@ -375,6 +388,26 @@
 	return ata_qc_issue_prot(qc);
 }
 
+static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status)
+{
+	qc->err_mask |= ac_err_mask(status);
+
+	if (!qc->err_mask) {
+		ata_qc_complete(qc);
+	} else {
+		struct ata_port    *ap  = qc->ap;
+		struct ata_eh_info *ehi = &ap->link.eh_info;
+
+		ata_ehi_clear_desc(ehi);
+		ata_ehi_push_desc(ehi, "status 0x%02X", status);
+
+		if (qc->err_mask == AC_ERR_DEV)
+			ata_port_abort(ap);
+		else
+			ata_port_freeze(ap);
+	}
+}
+
 static inline unsigned int qs_intr_pkt(struct ata_host *host)
 {
 	unsigned int handled = 0;
@@ -406,10 +439,8 @@
 					switch (sHST) {
 					case 0: /* successful CPB */
 					case 3: /* device error */
-						pp->state = qs_state_idle;
 						qs_enter_reg_mode(qc->ap);
-						qc->err_mask |= ac_err_mask(sDST);
-						ata_qc_complete(qc);
+						qs_do_or_die(qc, sDST);
 						break;
 					default:
 						break;
@@ -431,25 +462,27 @@
 		if (ap &&
 		    !(ap->flags & ATA_FLAG_DISABLED)) {
 			struct ata_queued_cmd *qc;
-			struct qs_port_priv *pp = ap->private_data;
+			struct qs_port_priv *pp;
+			qc = ata_qc_from_tag(ap, ap->link.active_tag);
+			if (!qc || !(qc->flags & ATA_QCFLAG_ACTIVE)) {
+				/*
+				 * The qstor hardware generates spurious
+				 * interrupts from time to time when switching
+				 * in and out of packet mode.
+				 * There's no obvious way to know if we're
+				 * here now due to that, so just ack the irq
+				 * and pretend we knew it was ours.. (ugh).
+				 * This does not affect packet mode.
+				 */
+				ata_check_status(ap);
+				handled = 1;
+				continue;
+			}
+			pp = ap->private_data;
 			if (!pp || pp->state != qs_state_mmio)
 				continue;
-			qc = ata_qc_from_tag(ap, ap->link.active_tag);
-			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
-
-				/* check main status, clearing INTRQ */
-				u8 status = ata_check_status(ap);
-				if ((status & ATA_BUSY))
-					continue;
-				DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
-					ap->print_id, qc->tf.protocol, status);
-
-				/* complete taskfile transaction */
-				pp->state = qs_state_idle;
-				qc->err_mask |= ac_err_mask(status);
-				ata_qc_complete(qc);
-				handled = 1;
-			}
+			if (!(qc->tf.flags & ATA_TFLAG_POLLING))
+				handled |= ata_host_intr(ap, qc);
 		}
 	}
 	return handled;
@@ -459,12 +492,13 @@
 {
 	struct ata_host *host = dev_instance;
 	unsigned int handled = 0;
+	unsigned long flags;
 
 	VPRINTK("ENTER\n");
 
-	spin_lock(&host->lock);
+	spin_lock_irqsave(&host->lock, flags);
 	handled  = qs_intr_pkt(host) | qs_intr_mmio(host);
-	spin_unlock(&host->lock);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	VPRINTK("EXIT\n");
 
@@ -501,7 +535,6 @@
 	rc = ata_port_start(ap);
 	if (rc)
 		return rc;
-	qs_enter_reg_mode(ap);
 	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
 	if (!pp)
 		return -ENOMEM;
@@ -512,6 +545,7 @@
 	memset(pp->pkt, 0, QS_PKT_BYTES);
 	ap->private_data = pp;
 
+	qs_enter_reg_mode(ap);
 	addr = (u64)pp->pkt_dma;
 	writel((u32) addr,        chan + QS_CCF_CPBA);
 	writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 6332aca..b4c0888 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -28,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <net/sock.h>
+#include <linux/net.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -126,7 +127,7 @@
 	if (lo->sock) {
 		printk(KERN_WARNING "%s: shutting down socket\n",
 			lo->disk->disk_name);
-		lo->sock->ops->shutdown(lo->sock, SEND_SHUTDOWN|RCV_SHUTDOWN);
+		kernel_sock_shutdown(lo->sock, SHUT_RDWR);
 		lo->sock = NULL;
 	}
 	if (lock)
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index ceffa60..e7fe6ca 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -488,13 +488,11 @@
 	return r;
 }
 
-#define DBMSG(msg)      ((verbose>1)?(msg):NULL)
-
 static void pf_lock(struct pf_unit *pf, int func)
 {
 	char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 };
 
-	pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "unlock" : "lock");
+	pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock");
 }
 
 static void pf_eject(struct pf_unit *pf)
@@ -555,7 +553,7 @@
 	    { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
 	char buf[8];
 
-	pf_atapi(pf, ms_cmd, 8, buf, DBMSG("mode sense"));
+	pf_atapi(pf, ms_cmd, 8, buf, "mode sense");
 	pf->media_status = PF_RW;
 	if (buf[3] & 0x80)
 		pf->media_status = PF_RO;
@@ -591,7 +589,7 @@
 	char buf[8];
 	int bs;
 
-	if (pf_atapi(pf, rc_cmd, 8, buf, DBMSG("get capacity"))) {
+	if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) {
 		pf->media_status = PF_NM;
 		return;
 	}
@@ -804,13 +802,18 @@
 	pf_buf += 512;
 	pf_block++;
 	if (!pf_run)
-		return 0;
-	if (!pf_count)
 		return 1;
-	spin_lock_irqsave(&pf_spin_lock, saved_flags);
-	pf_end_request(1);
-	spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
-	return 1;
+	if (!pf_count) {
+		spin_lock_irqsave(&pf_spin_lock, saved_flags);
+		pf_end_request(1);
+		pf_req = elv_next_request(pf_queue);
+		spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
+		if (!pf_req)
+			return 1;
+		pf_count = pf_req->current_nr_sectors;
+		pf_buf = pf_req->buffer;
+	}
+	return 0;
 }
 
 static inline void next_request(int success)
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index 9f4e67e..b91accf 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -664,7 +664,7 @@
 		goto out;
 
 	err = -EROFS;
-	if ((!tape->flags & PT_WRITE_OK) && (file->f_mode & 2))
+	if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & 2))
 		goto out;
 
 	if (!(iminor(inode) & 128))
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index a8130a4..a5ee213 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -358,10 +358,19 @@
 					size_t count)
 {
 	unsigned int major, minor;
+
 	if (sscanf(buf, "%u:%u", &major, &minor) == 2) {
+		/* pkt_setup_dev() expects caller to hold reference to self */
+		if (!try_module_get(THIS_MODULE))
+			return -ENODEV;
+
 		pkt_setup_dev(MKDEV(major, minor), NULL);
+
+		module_put(THIS_MODULE);
+
 		return count;
 	}
+
 	return -EINVAL;
 }
 
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 47f8ac6..82f4eec 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -189,6 +189,18 @@
 	return 0;
 }
 
+/*
+ * releasepage is called by pagevec_strip/try_to_release_page if
+ * buffers_heads_over_limit is true. Without a releasepage function
+ * try_to_free_buffers is called instead. That can unset the dirty
+ * bit of our ram disk pages, which will be eventually freed, even
+ * if the page is still in use.
+ */
+static int ramdisk_releasepage(struct page *page, gfp_t dummy)
+{
+	return 0;
+}
+
 static const struct address_space_operations ramdisk_aops = {
 	.readpage	= ramdisk_readpage,
 	.prepare_write	= ramdisk_prepare_write,
@@ -196,6 +208,7 @@
 	.writepage	= ramdisk_writepage,
 	.set_page_dirty	= ramdisk_set_page_dirty,
 	.writepages	= ramdisk_writepages,
+	.releasepage	= ramdisk_releasepage,
 };
 
 static int rd_blkdev_pagecache_IO(int rw, struct bio_vec *vec, sector_t sector,
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 9dd0760..dde02a1 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -559,8 +559,6 @@
  * a family of cards. There will one drm_device for each card present
  * in this family
  */
-struct drm_device;
-
 struct drm_driver {
 	int (*load) (struct drm_device *, unsigned long flags);
 	int (*firstopen) (struct drm_device *);
diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c
index d9be146..3cbebf8 100644
--- a/drivers/char/drm/drm_ioctl.c
+++ b/drivers/char/drm/drm_ioctl.c
@@ -272,7 +272,7 @@
 	struct drm_stats *stats = data;
 	int i;
 
-	memset(stats, 0, sizeof(stats));
+	memset(stats, 0, sizeof(*stats));
 
 	mutex_lock(&dev->struct_mutex);
 
diff --git a/drivers/char/drm/drm_os_linux.h b/drivers/char/drm/drm_os_linux.h
index 76e44ac..daa69c9 100644
--- a/drivers/char/drm/drm_os_linux.h
+++ b/drivers/char/drm/drm_os_linux.h
@@ -62,14 +62,6 @@
 
 #endif
 
-/** For data going into the kernel through the ioctl argument */
-#define DRM_COPY_FROM_USER_IOCTL(arg1, arg2, arg3)	\
-	if ( copy_from_user(&arg1, arg2, arg3) )	\
-		return -EFAULT
-/** For data going from the kernel through the ioctl argument */
-#define DRM_COPY_TO_USER_IOCTL(arg1, arg2, arg3)	\
-	if ( copy_to_user(arg1, &arg2, arg3) )		\
-		return -EFAULT
 /** Other copying of data to kernel space */
 #define DRM_COPY_FROM_USER(arg1, arg2, arg3)		\
 	copy_from_user(arg1, arg2, arg3)
diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c
index 59484d5..d465b2f 100644
--- a/drivers/char/drm/savage_bci.c
+++ b/drivers/char/drm/savage_bci.c
@@ -968,9 +968,6 @@
 
 	DRM_DEBUG("\n");
 
-	DRM_COPY_FROM_USER_IOCTL(event, (drm_savage_event_wait_t __user *) data,
-				 sizeof(event));
-
 	UPDATE_EVENT_COUNTER();
 	if (dev_priv->status_ptr)
 		hw_e = dev_priv->status_ptr[1] & 0xffff;
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index cc5d777..02518da 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -47,7 +47,7 @@
 /* #define ATR_CSUM */
 
 #ifdef PCMCIA_DEBUG
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev->handle))
+#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
 static int pc_debug = PCMCIA_DEBUG;
 module_param(pc_debug, int, 0600);
 #define DEBUGP(n, rdr, x, args...) do { 				\
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index a0b9c87..5f291bf 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -41,7 +41,7 @@
 
 
 #ifdef PCMCIA_DEBUG
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev->handle))
+#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
 static int pc_debug = PCMCIA_DEBUG;
 module_param(pc_debug, int, 0600);
 #define DEBUGP(n, rdr, x, args...) do { 				\
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 1756b1f..5fee056 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1494,7 +1494,7 @@
 	seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK;
 	seq += keyptr->count;
 
-	seq += ktime_get_real().tv64;
+	seq += ktime_to_ns(ktime_get_real());
 
 	return seq;
 }
@@ -1556,7 +1556,7 @@
 	 *	overlaps less than one time per MSL (2 minutes).
 	 *	Choosing a clock of 64 ns period is OK. (period of 274 s)
 	 */
-	seq += ktime_get_real().tv64 >> 6;
+	seq += ktime_to_ns(ktime_get_real()) >> 6;
 #if 0
 	printk("init_seq(%lx, %lx, %d, %d) = %d\n",
 	       saddr, daddr, sport, dport, seq);
@@ -1616,7 +1616,7 @@
 	seq = half_md4_transform(hash, keyptr->secret);
 	seq |= ((u64)keyptr->count) << (32 - HASH_BITS);
 
-	seq += ktime_get_real().tv64;
+	seq += ktime_to_ns(ktime_get_real());
 	seq &= (1ull << 48) - 1;
 #if 0
 	printk("dccp init_seq(%lx, %lx, %d, %d) = %d\n",
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ec6b65e..0c66b80 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -918,6 +918,31 @@
 };
 #endif
 
+static resource_size_t rtc_size;
+
+static struct resource * __init rtc_request_region(resource_size_t size)
+{
+	struct resource *r;
+
+	if (RTC_IOMAPPED)
+		r = request_region(RTC_PORT(0), size, "rtc");
+	else
+		r = request_mem_region(RTC_PORT(0), size, "rtc");
+
+	if (r)
+		rtc_size = size;
+
+	return r;
+}
+
+static void rtc_release_region(void)
+{
+	if (RTC_IOMAPPED)
+		release_region(RTC_PORT(0), rtc_size);
+	else
+		release_mem_region(RTC_PORT(0), rtc_size);
+}
+
 static int __init rtc_init(void)
 {
 #ifdef CONFIG_PROC_FS
@@ -968,10 +993,17 @@
 	}
 no_irq:
 #else
-	if (RTC_IOMAPPED)
-		r = request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
-	else
-		r = request_mem_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+	r = rtc_request_region(RTC_IO_EXTENT);
+
+	/*
+	 * If we've already requested a smaller range (for example, because
+	 * PNPBIOS or ACPI told us how the device is configured), the request
+	 * above might fail because it's too big.
+	 *
+	 * If so, request just the range we actually use.
+	 */
+	if (!r)
+		r = rtc_request_region(RTC_IO_EXTENT_USED);
 	if (!r) {
 #ifdef RTC_IRQ
 		rtc_has_irq = 0;
@@ -992,10 +1024,7 @@
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		rtc_has_irq = 0;
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
-		if (RTC_IOMAPPED)
-			release_region(RTC_PORT(0), RTC_IO_EXTENT);
-		else
-			release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
+		rtc_release_region();
 		return -EIO;
 	}
 	hpet_rtc_timer_init();
@@ -1009,7 +1038,7 @@
 		free_irq(RTC_IRQ, NULL);
 		rtc_has_irq = 0;
 #endif
-		release_region(RTC_PORT(0), RTC_IO_EXTENT);
+		rtc_release_region();
 		return -ENODEV;
 	}
 
@@ -1091,10 +1120,7 @@
 	if (rtc_has_irq)
 		free_irq (rtc_irq, &rtc_port);
 #else
-	if (RTC_IOMAPPED)
-		release_region(RTC_PORT(0), RTC_IO_EXTENT);
-	else
-		release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
+	rtc_release_region();
 #ifdef RTC_IRQ
 	if (rtc_has_irq)
 		free_irq (RTC_IRQ, NULL);
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 7a00350..1bdd2bf 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -730,13 +730,23 @@
 	return 0;
 }
 
-int n_tty_ioctl(struct tty_struct * tty, struct file * file,
-		       unsigned int cmd, unsigned long arg)
+/**
+ *	tty_mode_ioctl		-	mode related ioctls
+ *	@tty: tty for the ioctl
+ *	@file: file pointer for the tty
+ *	@cmd: command
+ *	@arg: ioctl argument
+ *
+ *	Perform non line discipline specific mode control ioctls. This
+ *	is designed to be called by line disciplines to ensure they provide
+ *	consistent mode setting.
+ */
+
+int tty_mode_ioctl(struct tty_struct * tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
 {
 	struct tty_struct * real_tty;
 	void __user *p = (void __user *)arg;
-	int retval;
-	struct tty_ldisc *ld;
 
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
@@ -799,6 +809,93 @@
 			return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
 		case TCSETA:
 			return set_termios(real_tty, p, TERMIOS_TERMIO);
+#ifndef TCGETS2
+		case TIOCGLCKTRMIOS:
+			if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+				return -EFAULT;
+			return 0;
+
+		case TIOCSLCKTRMIOS:
+			if (!capable(CAP_SYS_ADMIN))
+				return -EPERM;
+			if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
+				return -EFAULT;
+			return 0;
+#else
+		case TIOCGLCKTRMIOS:
+			if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+				return -EFAULT;
+			return 0;
+
+		case TIOCSLCKTRMIOS:
+			if (!capable(CAP_SYS_ADMIN))
+				return -EPERM;
+			if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
+				return -EFAULT;
+			return 0;
+#endif
+		case TIOCGSOFTCAR:
+			return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
+		case TIOCSSOFTCAR:
+			if (get_user(arg, (unsigned int __user *) arg))
+				return -EFAULT;
+			mutex_lock(&tty->termios_mutex);
+			tty->termios->c_cflag =
+				((tty->termios->c_cflag & ~CLOCAL) |
+				 (arg ? CLOCAL : 0));
+			mutex_unlock(&tty->termios_mutex);
+			return 0;
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+EXPORT_SYMBOL_GPL(tty_mode_ioctl);
+
+int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
+{
+	struct tty_ldisc *ld;
+	int retval = tty_check_change(tty);
+	if (retval)
+		return retval;
+
+	ld = tty_ldisc_ref(tty);
+	switch (arg) {
+	case TCIFLUSH:
+		if (ld && ld->flush_buffer)
+			ld->flush_buffer(tty);
+		break;
+	case TCIOFLUSH:
+		if (ld && ld->flush_buffer)
+			ld->flush_buffer(tty);
+		/* fall through */
+	case TCOFLUSH:
+		if (tty->driver->flush_buffer)
+			tty->driver->flush_buffer(tty);
+		break;
+	default:
+		tty_ldisc_deref(ld);
+		return -EINVAL;
+	}
+	tty_ldisc_deref(ld);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(tty_perform_flush);
+
+int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+		       unsigned int cmd, unsigned long arg)
+{
+	struct tty_struct * real_tty;
+	int retval;
+
+	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+	    tty->driver->subtype == PTY_TYPE_MASTER)
+		real_tty = tty->link;
+	else
+		real_tty = tty;
+
+	switch (cmd) {
 		case TCXONC:
 			retval = tty_check_change(tty);
 			if (retval)
@@ -829,30 +926,7 @@
 			}
 			return 0;
 		case TCFLSH:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-				
-			ld = tty_ldisc_ref(tty);
-			switch (arg) {
-			case TCIFLUSH:
-				if (ld && ld->flush_buffer)
-					ld->flush_buffer(tty);
-				break;
-			case TCIOFLUSH:
-				if (ld && ld->flush_buffer)
-					ld->flush_buffer(tty);
-				/* fall through */
-			case TCOFLUSH:
-				if (tty->driver->flush_buffer)
-					tty->driver->flush_buffer(tty);
-				break;
-			default:
-				tty_ldisc_deref(ld);
-				return -EINVAL;
-			}
-			tty_ldisc_deref(ld);
-			return 0;
+			return tty_perform_flush(tty, arg);
 		case TIOCOUTQ:
 			return put_user(tty->driver->chars_in_buffer ?
 					tty->driver->chars_in_buffer(tty) : 0,
@@ -862,32 +936,6 @@
 			if (L_ICANON(tty))
 				retval = inq_canon(tty);
 			return put_user(retval, (unsigned int __user *) arg);
-#ifndef TCGETS2
-		case TIOCGLCKTRMIOS:
-			if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
-				return -EFAULT;
-			return 0;
-
-		case TIOCSLCKTRMIOS:
-			if (!capable(CAP_SYS_ADMIN))
-				return -EPERM;
-			if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
-				return -EFAULT;
-			return 0;
-#else
-		case TIOCGLCKTRMIOS:
-			if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
-				return -EFAULT;
-			return 0;
-
-		case TIOCSLCKTRMIOS:
-			if (!capable(CAP_SYS_ADMIN))
-				return -EPERM;
-			if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
-				return -EFAULT;
-			return 0;
-#endif
-
 		case TIOCPKT:
 		{
 			int pktmode;
@@ -906,19 +954,9 @@
 				tty->packet = 0;
 			return 0;
 		}
-		case TIOCGSOFTCAR:
-			return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
-		case TIOCSSOFTCAR:
-			if (get_user(arg, (unsigned int __user *) arg))
-				return -EFAULT;
-			mutex_lock(&tty->termios_mutex);
-			tty->termios->c_cflag =
-				((tty->termios->c_cflag & ~CLOCAL) |
-				 (arg ? CLOCAL : 0));
-			mutex_unlock(&tty->termios_mutex);
-			return 0;
 		default:
-			return -ENOIOCTLCMD;
+			/* Try the mode commands */
+			return tty_mode_ioctl(tty, file, cmd, arg);
 		}
 }
 
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 100e8a2..e34da5c 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -141,7 +141,7 @@
  * never remove the console device we never need this pointer again.
  *
  * Finally we put our input buffer in the input queue, ready to receive. */
-static int virtcons_probe(struct virtio_device *dev)
+static int __devinit virtcons_probe(struct virtio_device *dev)
 {
 	int err;
 	struct hvc_struct *hvc;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 4bd33ce..1bba997 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -37,17 +37,17 @@
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_FREQUENCY_DOWN_THRESHOLD		(20)
 
-/* 
- * The polling frequency of this governor depends on the capability of 
+/*
+ * The polling frequency of this governor depends on the capability of
  * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with 
- * transition latency <= 10mS, using appropriate sampling 
+ * latency of the processor. The governor will work on any processor with
+ * transition latency <= 10mS, using appropriate sampling
  * rate.
  * For CPUs with transition latency > 10mS (mostly drivers
  * with CPUFREQ_ETERNAL), this governor will not work.
  * All times here are in uS.
  */
-static unsigned int 				def_sampling_rate;
+static unsigned int def_sampling_rate;
 #define MIN_SAMPLING_RATE_RATIO			(2)
 /* for correct statistics, we need at least 10 ticks between each measure */
 #define MIN_STAT_SAMPLING_RATE			\
@@ -63,12 +63,12 @@
 static void do_dbs_timer(struct work_struct *work);
 
 struct cpu_dbs_info_s {
-	struct cpufreq_policy 	*cur_policy;
-	unsigned int 		prev_cpu_idle_up;
-	unsigned int 		prev_cpu_idle_down;
-	unsigned int 		enable;
-	unsigned int		down_skip;
-	unsigned int		requested_freq;
+	struct cpufreq_policy *cur_policy;
+	unsigned int prev_cpu_idle_up;
+	unsigned int prev_cpu_idle_down;
+	unsigned int enable;
+	unsigned int down_skip;
+	unsigned int requested_freq;
 };
 static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
 
@@ -82,24 +82,24 @@
  * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
  * is recursive for the same process. -Venki
  */
-static DEFINE_MUTEX 	(dbs_mutex);
+static DEFINE_MUTEX (dbs_mutex);
 static DECLARE_DELAYED_WORK(dbs_work, do_dbs_timer);
 
 struct dbs_tuners {
-	unsigned int 		sampling_rate;
-	unsigned int		sampling_down_factor;
-	unsigned int		up_threshold;
-	unsigned int		down_threshold;
-	unsigned int		ignore_nice;
-	unsigned int		freq_step;
+	unsigned int sampling_rate;
+	unsigned int sampling_down_factor;
+	unsigned int up_threshold;
+	unsigned int down_threshold;
+	unsigned int ignore_nice;
+	unsigned int freq_step;
 };
 
 static struct dbs_tuners dbs_tuners_ins = {
-	.up_threshold 		= DEF_FREQUENCY_UP_THRESHOLD,
-	.down_threshold 	= DEF_FREQUENCY_DOWN_THRESHOLD,
-	.sampling_down_factor 	= DEF_SAMPLING_DOWN_FACTOR,
-	.ignore_nice		= 0,
-	.freq_step		= 5,
+	.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
+	.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
+	.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
+	.ignore_nice = 0,
+	.freq_step = 5,
 };
 
 static inline unsigned int get_cpu_idle_time(unsigned int cpu)
@@ -109,13 +109,34 @@
 	if (dbs_tuners_ins.ignore_nice)
 		add_nice = kstat_cpu(cpu).cpustat.nice;
 
-	ret = 	kstat_cpu(cpu).cpustat.idle +
+	ret = kstat_cpu(cpu).cpustat.idle +
 		kstat_cpu(cpu).cpustat.iowait +
 		add_nice;
 
 	return ret;
 }
 
+/* keep track of frequency transitions */
+static int
+dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+		     void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info,
+							freq->cpu);
+
+	if (!this_dbs_info->enable)
+		return 0;
+
+	this_dbs_info->requested_freq = freq->new;
+
+	return 0;
+}
+
+static struct notifier_block dbs_cpufreq_notifier_block = {
+	.notifier_call = dbs_cpufreq_notifier
+};
+
 /************************** sysfs interface ************************/
 static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
 {
@@ -127,8 +148,8 @@
 	return sprintf (buf, "%u\n", MIN_SAMPLING_RATE);
 }
 
-#define define_one_ro(_name) 					\
-static struct freq_attr _name =  				\
+#define define_one_ro(_name)				\
+static struct freq_attr _name =				\
 __ATTR(_name, 0444, show_##_name, NULL)
 
 define_one_ro(sampling_rate_max);
@@ -148,7 +169,7 @@
 show_one(ignore_nice_load, ignore_nice);
 show_one(freq_step, freq_step);
 
-static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, 
+static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
 		const char *buf, size_t count)
 {
 	unsigned int input;
@@ -164,7 +185,7 @@
 	return count;
 }
 
-static ssize_t store_sampling_rate(struct cpufreq_policy *unused, 
+static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
 		const char *buf, size_t count)
 {
 	unsigned int input;
@@ -183,7 +204,7 @@
 	return count;
 }
 
-static ssize_t store_up_threshold(struct cpufreq_policy *unused, 
+static ssize_t store_up_threshold(struct cpufreq_policy *unused,
 		const char *buf, size_t count)
 {
 	unsigned int input;
@@ -202,7 +223,7 @@
 	return count;
 }
 
-static ssize_t store_down_threshold(struct cpufreq_policy *unused, 
+static ssize_t store_down_threshold(struct cpufreq_policy *unused,
 		const char *buf, size_t count)
 {
 	unsigned int input;
@@ -228,16 +249,16 @@
 	int ret;
 
 	unsigned int j;
-	
-	ret = sscanf (buf, "%u", &input);
-	if ( ret != 1 )
+
+	ret = sscanf(buf, "%u", &input);
+	if (ret != 1)
 		return -EINVAL;
 
-	if ( input > 1 )
+	if (input > 1)
 		input = 1;
-	
+
 	mutex_lock(&dbs_mutex);
-	if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
+	if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
 		mutex_unlock(&dbs_mutex);
 		return count;
 	}
@@ -261,14 +282,14 @@
 	unsigned int input;
 	int ret;
 
-	ret = sscanf (buf, "%u", &input);
+	ret = sscanf(buf, "%u", &input);
 
-	if ( ret != 1 )
+	if (ret != 1)
 		return -EINVAL;
 
-	if ( input > 100 )
+	if (input > 100)
 		input = 100;
-	
+
 	/* no need to test here if freq_step is zero as the user might actually
 	 * want this, they would be crazy though :) */
 	mutex_lock(&dbs_mutex);
@@ -322,18 +343,18 @@
 
 	policy = this_dbs_info->cur_policy;
 
-	/* 
-	 * The default safe range is 20% to 80% 
+	/*
+	 * The default safe range is 20% to 80%
 	 * Every sampling_rate, we check
-	 * 	- If current idle time is less than 20%, then we try to 
-	 * 	  increase frequency
+	 *	- If current idle time is less than 20%, then we try to
+	 *	  increase frequency
 	 * Every sampling_rate*sampling_down_factor, we check
-	 * 	- If current idle time is more than 80%, then we try to
-	 * 	  decrease frequency
+	 *	- If current idle time is more than 80%, then we try to
+	 *	  decrease frequency
 	 *
-	 * Any frequency increase takes it to the maximum frequency. 
-	 * Frequency reduction happens at minimum steps of 
-	 * 5% (default) of max_frequency 
+	 * Any frequency increase takes it to the maximum frequency.
+	 * Frequency reduction happens at minimum steps of
+	 * 5% (default) of max_frequency
 	 */
 
 	/* Check for frequency increase */
@@ -361,13 +382,13 @@
 		/* if we are already at full speed then break out early */
 		if (this_dbs_info->requested_freq == policy->max)
 			return;
-		
+
 		freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100;
 
 		/* max freq cannot be less than 100. But who knows.... */
 		if (unlikely(freq_step == 0))
 			freq_step = 5;
-		
+
 		this_dbs_info->requested_freq += freq_step;
 		if (this_dbs_info->requested_freq > policy->max)
 			this_dbs_info->requested_freq = policy->max;
@@ -427,15 +448,15 @@
 }
 
 static void do_dbs_timer(struct work_struct *work)
-{ 
+{
 	int i;
 	mutex_lock(&dbs_mutex);
 	for_each_online_cpu(i)
 		dbs_check_cpu(i);
-	schedule_delayed_work(&dbs_work, 
+	schedule_delayed_work(&dbs_work,
 			usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
 	mutex_unlock(&dbs_mutex);
-} 
+}
 
 static inline void dbs_timer_init(void)
 {
@@ -462,13 +483,12 @@
 
 	switch (event) {
 	case CPUFREQ_GOV_START:
-		if ((!cpu_online(cpu)) || 
-		    (!policy->cur))
+		if ((!cpu_online(cpu)) || (!policy->cur))
 			return -EINVAL;
 
 		if (this_dbs_info->enable) /* Already enabled */
 			break;
-		 
+
 		mutex_lock(&dbs_mutex);
 
 		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -481,7 +501,7 @@
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
 			j_dbs_info->cur_policy = policy;
-		
+
 			j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(cpu);
 			j_dbs_info->prev_cpu_idle_down
 				= j_dbs_info->prev_cpu_idle_up;
@@ -511,8 +531,11 @@
 			dbs_tuners_ins.sampling_rate = def_sampling_rate;
 
 			dbs_timer_init();
+			cpufreq_register_notifier(
+					&dbs_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
 		}
-		
+
 		mutex_unlock(&dbs_mutex);
 		break;
 
@@ -525,9 +548,13 @@
 		 * Stop the timerschedule work, when this governor
 		 * is used for first time
 		 */
-		if (dbs_enable == 0) 
+		if (dbs_enable == 0) {
 			dbs_timer_exit();
-		
+			cpufreq_unregister_notifier(
+					&dbs_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+		}
+
 		mutex_unlock(&dbs_mutex);
 
 		break;
@@ -537,11 +564,11 @@
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
-				       	policy->max, CPUFREQ_RELATION_H);
+					policy->max, CPUFREQ_RELATION_H);
 		else if (policy->min > this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(
 					this_dbs_info->cur_policy,
-				       	policy->min, CPUFREQ_RELATION_L);
+					policy->min, CPUFREQ_RELATION_L);
 		mutex_unlock(&dbs_mutex);
 		break;
 	}
diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
index f9a34ab..711e246 100644
--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -110,8 +110,7 @@
 	 * we don't need to worry
 	 */
 
-	if (op->src == op->dst)
-		flags |= (AES_CTRL_DCA | AES_CTRL_SCA);
+	flags |= (AES_CTRL_DCA | AES_CTRL_SCA);
 
 	if (op->dir == AES_DIR_ENCRYPT)
 		flags |= AES_CTRL_ENCRYPT;
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 8248992..d59b2f4 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -182,10 +182,9 @@
 				/* we are done once this client rejects
 				 * an available resource
 				 */
-				if (ack == DMA_ACK) {
+				if (ack == DMA_ACK)
 					dma_chan_get(chan);
-					kref_get(&device->refcount);
-				} else if (ack == DMA_NAK)
+				else if (ack == DMA_NAK)
 					return;
 			}
 		}
@@ -272,11 +271,8 @@
 		/* client was holding resources for this channel so
 		 * free it
 		 */
-		if (ack == DMA_ACK) {
+		if (ack == DMA_ACK)
 			dma_chan_put(chan);
-			kref_put(&chan->device->refcount,
-				dma_async_device_cleanup);
-		}
 	}
 
 	mutex_unlock(&dma_list_mutex);
@@ -316,11 +312,8 @@
 			ack = client->event_callback(client, chan,
 				DMA_RESOURCE_REMOVED);
 
-			if (ack == DMA_ACK) {
+			if (ack == DMA_ACK)
 				dma_chan_put(chan);
-				kref_put(&chan->device->refcount,
-					dma_async_device_cleanup);
-			}
 		}
 
 	list_del(&client->global_node);
@@ -397,6 +390,8 @@
 			goto err_out;
 		}
 
+		/* One for the channel, one of the class device */
+		kref_get(&device->refcount);
 		kref_get(&device->refcount);
 		kref_init(&chan->refcount);
 		chan->slow_ref = 0;
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index f204c39..16e0fd8 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -39,10 +39,14 @@
 MODULE_AUTHOR("Intel Corporation");
 
 static struct pci_device_id ioat_pci_tbl[] = {
+	/* I/OAT v1 platforms */
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB)  },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },
+
+	/* I/OAT v2 platforms */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
 	{ 0, }
 };
 
@@ -74,10 +78,17 @@
 		if (device->dma && ioat_dca_enabled)
 			device->dca = ioat_dca_init(pdev, iobase);
 		break;
+	case IOAT_VER_2_0:
+		device->dma = ioat_dma_probe(pdev, iobase);
+		if (device->dma && ioat_dca_enabled)
+			device->dca = ioat2_dca_init(pdev, iobase);
+		break;
 	default:
 		err = -ENODEV;
 		break;
 	}
+	if (!device->dma)
+		err = -ENODEV;
 	return err;
 }
 
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index ba98571..0fa8a98 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -261,3 +261,167 @@
 	return dca;
 }
 
+
+static int ioat2_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	struct pci_dev *pdev;
+	int i;
+	u16 id;
+	u16 global_req_table;
+
+	/* This implementation only supports PCI-Express */
+	if (dev->bus != &pci_bus_type)
+		return -ENODEV;
+	pdev = to_pci_dev(dev);
+	id = dcaid_from_pcidev(pdev);
+
+	if (ioatdca->requester_count == ioatdca->max_requesters)
+		return -ENODEV;
+
+	for (i = 0; i < ioatdca->max_requesters; i++) {
+		if (ioatdca->req_slots[i].pdev == NULL) {
+			/* found an empty slot */
+			ioatdca->requester_count++;
+			ioatdca->req_slots[i].pdev = pdev;
+			ioatdca->req_slots[i].rid = id;
+			global_req_table =
+			      readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+			writel(id | IOAT_DCA_GREQID_VALID,
+			       ioatdca->iobase + global_req_table + (i * 4));
+			return i;
+		}
+	}
+	/* Error, ioatdma->requester_count is out of whack */
+	return -EFAULT;
+}
+
+static int ioat2_dca_remove_requester(struct dca_provider *dca,
+				      struct device *dev)
+{
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	struct pci_dev *pdev;
+	int i;
+	u16 global_req_table;
+
+	/* This implementation only supports PCI-Express */
+	if (dev->bus != &pci_bus_type)
+		return -ENODEV;
+	pdev = to_pci_dev(dev);
+
+	for (i = 0; i < ioatdca->max_requesters; i++) {
+		if (ioatdca->req_slots[i].pdev == pdev) {
+			global_req_table =
+			      readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+			writel(0, ioatdca->iobase + global_req_table + (i * 4));
+			ioatdca->req_slots[i].pdev = NULL;
+			ioatdca->req_slots[i].rid = 0;
+			ioatdca->requester_count--;
+			return i;
+		}
+	}
+	return -ENODEV;
+}
+
+static u8 ioat2_dca_get_tag(struct dca_provider *dca, int cpu)
+{
+	u8 tag;
+
+	tag = ioat_dca_get_tag(dca, cpu);
+	tag = (~tag) & 0x1F;
+	return tag;
+}
+
+static struct dca_ops ioat2_dca_ops = {
+	.add_requester		= ioat2_dca_add_requester,
+	.remove_requester	= ioat2_dca_remove_requester,
+	.get_tag		= ioat2_dca_get_tag,
+};
+
+static int ioat2_dca_count_dca_slots(void *iobase, u16 dca_offset)
+{
+	int slots = 0;
+	u32 req;
+	u16 global_req_table;
+
+	global_req_table = readw(iobase + dca_offset + IOAT_DCA_GREQID_OFFSET);
+	if (global_req_table == 0)
+		return 0;
+	do {
+		req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+		slots++;
+	} while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+	return slots;
+}
+
+struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+	struct dca_provider *dca;
+	struct ioat_dca_priv *ioatdca;
+	int slots;
+	int i;
+	int err;
+	u32 tag_map;
+	u16 dca_offset;
+	u16 csi_fsb_control;
+	u16 pcie_control;
+	u8 bit;
+
+	if (!system_has_dca_enabled(pdev))
+		return NULL;
+
+	dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+	if (dca_offset == 0)
+		return NULL;
+
+	slots = ioat2_dca_count_dca_slots(iobase, dca_offset);
+	if (slots == 0)
+		return NULL;
+
+	dca = alloc_dca_provider(&ioat2_dca_ops,
+				 sizeof(*ioatdca)
+				      + (sizeof(struct ioat_dca_slot) * slots));
+	if (!dca)
+		return NULL;
+
+	ioatdca = dca_priv(dca);
+	ioatdca->iobase = iobase;
+	ioatdca->dca_base = iobase + dca_offset;
+	ioatdca->max_requesters = slots;
+
+	/* some bios might not know to turn these on */
+	csi_fsb_control = readw(ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+	if ((csi_fsb_control & IOAT_FSB_CAP_ENABLE_PREFETCH) == 0) {
+		csi_fsb_control |= IOAT_FSB_CAP_ENABLE_PREFETCH;
+		writew(csi_fsb_control,
+		       ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+	}
+	pcie_control = readw(ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+	if ((pcie_control & IOAT_PCI_CAP_ENABLE_MEMWR) == 0) {
+		pcie_control |= IOAT_PCI_CAP_ENABLE_MEMWR;
+		writew(pcie_control,
+		       ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+	}
+
+
+	/* TODO version, compatibility and configuration checks */
+
+	/* copy out the APIC to DCA tag map */
+	tag_map = readl(ioatdca->dca_base + IOAT_APICID_TAG_MAP_OFFSET);
+	for (i = 0; i < 5; i++) {
+		bit = (tag_map >> (4 * i)) & 0x0f;
+		if (bit < 8)
+			ioatdca->tag_map[i] = bit | DCA_TAG_MAP_VALID;
+		else
+			ioatdca->tag_map[i] = 0;
+	}
+
+	err = register_dca_provider(dca, &pdev->dev);
+	if (err) {
+		free_dca_provider(dca);
+		return NULL;
+	}
+
+	return dca;
+}
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 7e4a785..c1c2dcc 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -36,18 +36,24 @@
 #include "ioatdma_registers.h"
 #include "ioatdma_hw.h"
 
-#define INITIAL_IOAT_DESC_COUNT 128
-
 #define to_ioat_chan(chan) container_of(chan, struct ioat_dma_chan, common)
 #define to_ioatdma_device(dev) container_of(dev, struct ioatdma_device, common)
 #define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
 #define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, async_tx)
 
+static int ioat_pending_level = 4;
+module_param(ioat_pending_level, int, 0644);
+MODULE_PARM_DESC(ioat_pending_level,
+		 "high-water mark for pushing ioat descriptors (default: 4)");
+
 /* internal functions */
 static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan);
 static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan);
+
 static struct ioat_desc_sw *
-ioat_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
+ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
+static struct ioat_desc_sw *
+ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
 
 static inline struct ioat_dma_chan *ioat_lookup_chan_by_index(
 						struct ioatdma_device *device,
@@ -130,6 +136,12 @@
 		ioat_chan->device = device;
 		ioat_chan->reg_base = device->reg_base + (0x80 * (i + 1));
 		ioat_chan->xfercap = xfercap;
+		ioat_chan->desccount = 0;
+		if (ioat_chan->device->version != IOAT_VER_1_2) {
+			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
+					| IOAT_DMA_DCA_ANY_CPU,
+				ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+		}
 		spin_lock_init(&ioat_chan->cleanup_lock);
 		spin_lock_init(&ioat_chan->desc_lock);
 		INIT_LIST_HEAD(&ioat_chan->free_desc);
@@ -161,13 +173,17 @@
 	tx_to_ioat_desc(tx)->dst = addr;
 }
 
-static dma_cookie_t ioat_tx_submit(struct dma_async_tx_descriptor *tx)
+static inline void __ioat1_dma_memcpy_issue_pending(
+					       struct ioat_dma_chan *ioat_chan);
+static inline void __ioat2_dma_memcpy_issue_pending(
+					       struct ioat_dma_chan *ioat_chan);
+
+static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
 	struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
 	struct ioat_desc_sw *prev, *new;
 	struct ioat_dma_descriptor *hw;
-	int append = 0;
 	dma_cookie_t cookie;
 	LIST_HEAD(new_chain);
 	u32 copy;
@@ -209,7 +225,7 @@
 		list_add_tail(&new->node, &new_chain);
 		desc_count++;
 		prev = new;
-	} while (len && (new = ioat_dma_get_next_descriptor(ioat_chan)));
+	} while (len && (new = ioat1_dma_get_next_descriptor(ioat_chan)));
 
 	hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
 	if (new->async_tx.callback) {
@@ -246,20 +262,98 @@
 							first->async_tx.phys;
 	__list_splice(&new_chain, ioat_chan->used_desc.prev);
 
+	ioat_chan->dmacount += desc_count;
 	ioat_chan->pending += desc_count;
-	if (ioat_chan->pending >= 4) {
-		append = 1;
-		ioat_chan->pending = 0;
-	}
+	if (ioat_chan->pending >= ioat_pending_level)
+		__ioat1_dma_memcpy_issue_pending(ioat_chan);
 	spin_unlock_bh(&ioat_chan->desc_lock);
 
-	if (append)
-		writeb(IOAT_CHANCMD_APPEND,
-			ioat_chan->reg_base + IOAT_CHANCMD_OFFSET);
-
 	return cookie;
 }
 
+static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
+	struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
+	struct ioat_desc_sw *new;
+	struct ioat_dma_descriptor *hw;
+	dma_cookie_t cookie;
+	u32 copy;
+	size_t len;
+	dma_addr_t src, dst;
+	int orig_ack;
+	unsigned int desc_count = 0;
+
+	/* src and dest and len are stored in the initial descriptor */
+	len = first->len;
+	src = first->src;
+	dst = first->dst;
+	orig_ack = first->async_tx.ack;
+	new = first;
+
+	/* ioat_chan->desc_lock is still in force in version 2 path */
+
+	do {
+		copy = min((u32) len, ioat_chan->xfercap);
+
+		new->async_tx.ack = 1;
+
+		hw = new->hw;
+		hw->size = copy;
+		hw->ctl = 0;
+		hw->src_addr = src;
+		hw->dst_addr = dst;
+
+		len -= copy;
+		dst += copy;
+		src += copy;
+		desc_count++;
+	} while (len && (new = ioat2_dma_get_next_descriptor(ioat_chan)));
+
+	hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
+	if (new->async_tx.callback) {
+		hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
+		if (first != new) {
+			/* move callback into to last desc */
+			new->async_tx.callback = first->async_tx.callback;
+			new->async_tx.callback_param
+					= first->async_tx.callback_param;
+			first->async_tx.callback = NULL;
+			first->async_tx.callback_param = NULL;
+		}
+	}
+
+	new->tx_cnt = desc_count;
+	new->async_tx.ack = orig_ack; /* client is in control of this ack */
+
+	/* store the original values for use in later cleanup */
+	if (new != first) {
+		new->src = first->src;
+		new->dst = first->dst;
+		new->len = first->len;
+	}
+
+	/* cookie incr and addition to used_list must be atomic */
+	cookie = ioat_chan->common.cookie;
+	cookie++;
+	if (cookie < 0)
+		cookie = 1;
+	ioat_chan->common.cookie = new->async_tx.cookie = cookie;
+
+	ioat_chan->dmacount += desc_count;
+	ioat_chan->pending += desc_count;
+	if (ioat_chan->pending >= ioat_pending_level)
+		__ioat2_dma_memcpy_issue_pending(ioat_chan);
+	spin_unlock_bh(&ioat_chan->desc_lock);
+
+	return cookie;
+}
+
+/**
+ * ioat_dma_alloc_descriptor - allocate and return a sw and hw descriptor pair
+ * @ioat_chan: the channel supplying the memory pool for the descriptors
+ * @flags: allocation flags
+ */
 static struct ioat_desc_sw *ioat_dma_alloc_descriptor(
 					struct ioat_dma_chan *ioat_chan,
 					gfp_t flags)
@@ -284,15 +378,57 @@
 	dma_async_tx_descriptor_init(&desc_sw->async_tx, &ioat_chan->common);
 	desc_sw->async_tx.tx_set_src = ioat_set_src;
 	desc_sw->async_tx.tx_set_dest = ioat_set_dest;
-	desc_sw->async_tx.tx_submit = ioat_tx_submit;
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		desc_sw->async_tx.tx_submit = ioat1_tx_submit;
+		break;
+	case IOAT_VER_2_0:
+		desc_sw->async_tx.tx_submit = ioat2_tx_submit;
+		break;
+	}
 	INIT_LIST_HEAD(&desc_sw->async_tx.tx_list);
+
 	desc_sw->hw = desc;
 	desc_sw->async_tx.phys = phys;
 
 	return desc_sw;
 }
 
-/* returns the actual number of allocated descriptors */
+static int ioat_initial_desc_count = 256;
+module_param(ioat_initial_desc_count, int, 0644);
+MODULE_PARM_DESC(ioat_initial_desc_count,
+		 "initial descriptors per channel (default: 256)");
+
+/**
+ * ioat2_dma_massage_chan_desc - link the descriptors into a circle
+ * @ioat_chan: the channel to be massaged
+ */
+static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan)
+{
+	struct ioat_desc_sw *desc, *_desc;
+
+	/* setup used_desc */
+	ioat_chan->used_desc.next = ioat_chan->free_desc.next;
+	ioat_chan->used_desc.prev = NULL;
+
+	/* pull free_desc out of the circle so that every node is a hw
+	 * descriptor, but leave it pointing to the list
+	 */
+	ioat_chan->free_desc.prev->next = ioat_chan->free_desc.next;
+	ioat_chan->free_desc.next->prev = ioat_chan->free_desc.prev;
+
+	/* circle link the hw descriptors */
+	desc = to_ioat_desc(ioat_chan->free_desc.next);
+	desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
+	list_for_each_entry_safe(desc, _desc, ioat_chan->free_desc.next, node) {
+		desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
+	}
+}
+
+/**
+ * ioat_dma_alloc_chan_resources - returns the number of allocated descriptors
+ * @chan: the channel to be filled out
+ */
 static int ioat_dma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
@@ -304,7 +440,7 @@
 
 	/* have we already been set up? */
 	if (!list_empty(&ioat_chan->free_desc))
-		return INITIAL_IOAT_DESC_COUNT;
+		return ioat_chan->desccount;
 
 	/* Setup register to interrupt and write completion status on error */
 	chanctrl = IOAT_CHANCTRL_ERR_INT_EN |
@@ -320,7 +456,7 @@
 	}
 
 	/* Allocate descriptors */
-	for (i = 0; i < INITIAL_IOAT_DESC_COUNT; i++) {
+	for (i = 0; i < ioat_initial_desc_count; i++) {
 		desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_KERNEL);
 		if (!desc) {
 			dev_err(&ioat_chan->device->pdev->dev,
@@ -330,7 +466,10 @@
 		list_add_tail(&desc->node, &tmp_list);
 	}
 	spin_lock_bh(&ioat_chan->desc_lock);
+	ioat_chan->desccount = i;
 	list_splice(&tmp_list, &ioat_chan->free_desc);
+	if (ioat_chan->device->version != IOAT_VER_1_2)
+		ioat2_dma_massage_chan_desc(ioat_chan);
 	spin_unlock_bh(&ioat_chan->desc_lock);
 
 	/* allocate a completion writeback area */
@@ -347,10 +486,14 @@
 	       ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
 
 	tasklet_enable(&ioat_chan->cleanup_task);
-	ioat_dma_start_null_desc(ioat_chan);
-	return i;
+	ioat_dma_start_null_desc(ioat_chan);  /* give chain to dma device */
+	return ioat_chan->desccount;
 }
 
+/**
+ * ioat_dma_free_chan_resources - release all the descriptors
+ * @chan: the channel to be cleaned
+ */
 static void ioat_dma_free_chan_resources(struct dma_chan *chan)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
@@ -364,22 +507,45 @@
 	/* Delay 100ms after reset to allow internal DMA logic to quiesce
 	 * before removing DMA descriptor resources.
 	 */
-	writeb(IOAT_CHANCMD_RESET, ioat_chan->reg_base + IOAT_CHANCMD_OFFSET);
+	writeb(IOAT_CHANCMD_RESET,
+	       ioat_chan->reg_base
+			+ IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
 	mdelay(100);
 
 	spin_lock_bh(&ioat_chan->desc_lock);
-	list_for_each_entry_safe(desc, _desc, &ioat_chan->used_desc, node) {
-		in_use_descs++;
-		list_del(&desc->node);
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		list_for_each_entry_safe(desc, _desc,
+					 &ioat_chan->used_desc, node) {
+			in_use_descs++;
+			list_del(&desc->node);
+			pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+				      desc->async_tx.phys);
+			kfree(desc);
+		}
+		list_for_each_entry_safe(desc, _desc,
+					 &ioat_chan->free_desc, node) {
+			list_del(&desc->node);
+			pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+				      desc->async_tx.phys);
+			kfree(desc);
+		}
+		break;
+	case IOAT_VER_2_0:
+		list_for_each_entry_safe(desc, _desc,
+					 ioat_chan->free_desc.next, node) {
+			list_del(&desc->node);
+			pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+				      desc->async_tx.phys);
+			kfree(desc);
+		}
+		desc = to_ioat_desc(ioat_chan->free_desc.next);
 		pci_pool_free(ioatdma_device->dma_pool, desc->hw,
 			      desc->async_tx.phys);
 		kfree(desc);
-	}
-	list_for_each_entry_safe(desc, _desc, &ioat_chan->free_desc, node) {
-		list_del(&desc->node);
-		pci_pool_free(ioatdma_device->dma_pool, desc->hw,
-			      desc->async_tx.phys);
-		kfree(desc);
+		INIT_LIST_HEAD(&ioat_chan->free_desc);
+		INIT_LIST_HEAD(&ioat_chan->used_desc);
+		break;
 	}
 	spin_unlock_bh(&ioat_chan->desc_lock);
 
@@ -395,6 +561,7 @@
 
 	ioat_chan->last_completion = ioat_chan->completion_addr = 0;
 	ioat_chan->pending = 0;
+	ioat_chan->dmacount = 0;
 }
 
 /**
@@ -406,7 +573,7 @@
  * has run out.
  */
 static struct ioat_desc_sw *
-ioat_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
+ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
 {
 	struct ioat_desc_sw *new = NULL;
 
@@ -425,7 +592,82 @@
 	return new;
 }
 
-static struct dma_async_tx_descriptor *ioat_dma_prep_memcpy(
+static struct ioat_desc_sw *
+ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
+{
+	struct ioat_desc_sw *new = NULL;
+
+	/*
+	 * used.prev points to where to start processing
+	 * used.next points to next free descriptor
+	 * if used.prev == NULL, there are none waiting to be processed
+	 * if used.next == used.prev.prev, there is only one free descriptor,
+	 *      and we need to use it to as a noop descriptor before
+	 *      linking in a new set of descriptors, since the device
+	 *      has probably already read the pointer to it
+	 */
+	if (ioat_chan->used_desc.prev &&
+	    ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) {
+
+		struct ioat_desc_sw *desc = NULL;
+		struct ioat_desc_sw *noop_desc = NULL;
+		int i;
+
+		/* set up the noop descriptor */
+		noop_desc = to_ioat_desc(ioat_chan->used_desc.next);
+		noop_desc->hw->size = 0;
+		noop_desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL;
+		noop_desc->hw->src_addr = 0;
+		noop_desc->hw->dst_addr = 0;
+
+		ioat_chan->used_desc.next = ioat_chan->used_desc.next->next;
+		ioat_chan->pending++;
+		ioat_chan->dmacount++;
+
+		/* get a few more descriptors */
+		for (i = 16; i; i--) {
+			desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
+			BUG_ON(!desc);
+			list_add_tail(&desc->node, ioat_chan->used_desc.next);
+
+			desc->hw->next
+				= to_ioat_desc(desc->node.next)->async_tx.phys;
+			to_ioat_desc(desc->node.prev)->hw->next
+				= desc->async_tx.phys;
+			ioat_chan->desccount++;
+		}
+
+		ioat_chan->used_desc.next = noop_desc->node.next;
+	}
+	new = to_ioat_desc(ioat_chan->used_desc.next);
+	prefetch(new);
+	ioat_chan->used_desc.next = new->node.next;
+
+	if (ioat_chan->used_desc.prev == NULL)
+		ioat_chan->used_desc.prev = &new->node;
+
+	prefetch(new->hw);
+	return new;
+}
+
+static struct ioat_desc_sw *ioat_dma_get_next_descriptor(
+						struct ioat_dma_chan *ioat_chan)
+{
+	if (!ioat_chan)
+		return NULL;
+
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		return ioat1_dma_get_next_descriptor(ioat_chan);
+		break;
+	case IOAT_VER_2_0:
+		return ioat2_dma_get_next_descriptor(ioat_chan);
+		break;
+	}
+	return NULL;
+}
+
+static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy(
 						struct dma_chan *chan,
 						size_t len,
 						int int_en)
@@ -441,19 +683,62 @@
 	return new ? &new->async_tx : NULL;
 }
 
+static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
+						struct dma_chan *chan,
+						size_t len,
+						int int_en)
+{
+	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
+	struct ioat_desc_sw *new;
+
+	spin_lock_bh(&ioat_chan->desc_lock);
+	new = ioat2_dma_get_next_descriptor(ioat_chan);
+	new->len = len;
+
+	/* leave ioat_chan->desc_lock set in version 2 path */
+	return new ? &new->async_tx : NULL;
+}
+
+
 /**
  * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
  *                                 descriptors to hw
  * @chan: DMA channel handle
  */
-static void ioat_dma_memcpy_issue_pending(struct dma_chan *chan)
+static inline void __ioat1_dma_memcpy_issue_pending(
+						struct ioat_dma_chan *ioat_chan)
+{
+	ioat_chan->pending = 0;
+	writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET);
+}
+
+static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
 
 	if (ioat_chan->pending != 0) {
-		ioat_chan->pending = 0;
-		writeb(IOAT_CHANCMD_APPEND,
-		       ioat_chan->reg_base + IOAT_CHANCMD_OFFSET);
+		spin_lock_bh(&ioat_chan->desc_lock);
+		__ioat1_dma_memcpy_issue_pending(ioat_chan);
+		spin_unlock_bh(&ioat_chan->desc_lock);
+	}
+}
+
+static inline void __ioat2_dma_memcpy_issue_pending(
+						struct ioat_dma_chan *ioat_chan)
+{
+	ioat_chan->pending = 0;
+	writew(ioat_chan->dmacount,
+	       ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
+}
+
+static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
+
+	if (ioat_chan->pending != 0) {
+		spin_lock_bh(&ioat_chan->desc_lock);
+		__ioat2_dma_memcpy_issue_pending(ioat_chan);
+		spin_unlock_bh(&ioat_chan->desc_lock);
 	}
 }
 
@@ -465,11 +750,17 @@
 	       chan->reg_base + IOAT_CHANCTRL_OFFSET);
 }
 
+/**
+ * ioat_dma_memcpy_cleanup - cleanup up finished descriptors
+ * @chan: ioat channel to be cleaned up
+ */
 static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 {
 	unsigned long phys_complete;
 	struct ioat_desc_sw *desc, *_desc;
 	dma_cookie_t cookie = 0;
+	unsigned long desc_phys;
+	struct ioat_desc_sw *latest_desc;
 
 	prefetch(ioat_chan->completion_virt);
 
@@ -507,56 +798,115 @@
 
 	cookie = 0;
 	spin_lock_bh(&ioat_chan->desc_lock);
-	list_for_each_entry_safe(desc, _desc, &ioat_chan->used_desc, node) {
-
-		/*
-		 * Incoming DMA requests may use multiple descriptors, due to
-		 * exceeding xfercap, perhaps. If so, only the last one will
-		 * have a cookie, and require unmapping.
-		 */
-		if (desc->async_tx.cookie) {
-			cookie = desc->async_tx.cookie;
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		list_for_each_entry_safe(desc, _desc,
+					 &ioat_chan->used_desc, node) {
 
 			/*
-			 * yes we are unmapping both _page and _single alloc'd
-			 * regions with unmap_page. Is this *really* that bad?
+			 * Incoming DMA requests may use multiple descriptors,
+			 * due to exceeding xfercap, perhaps. If so, only the
+			 * last one will have a cookie, and require unmapping.
 			 */
-			pci_unmap_page(ioat_chan->device->pdev,
-					pci_unmap_addr(desc, dst),
-					pci_unmap_len(desc, len),
-					PCI_DMA_FROMDEVICE);
-			pci_unmap_page(ioat_chan->device->pdev,
-					pci_unmap_addr(desc, src),
-					pci_unmap_len(desc, len),
-					PCI_DMA_TODEVICE);
-			if (desc->async_tx.callback) {
-				desc->async_tx.callback(
-						desc->async_tx.callback_param);
-				desc->async_tx.callback = NULL;
+			if (desc->async_tx.cookie) {
+				cookie = desc->async_tx.cookie;
+
+				/*
+				 * yes we are unmapping both _page and _single
+				 * alloc'd regions with unmap_page. Is this
+				 * *really* that bad?
+				 */
+				pci_unmap_page(ioat_chan->device->pdev,
+						pci_unmap_addr(desc, dst),
+						pci_unmap_len(desc, len),
+						PCI_DMA_FROMDEVICE);
+				pci_unmap_page(ioat_chan->device->pdev,
+						pci_unmap_addr(desc, src),
+						pci_unmap_len(desc, len),
+						PCI_DMA_TODEVICE);
+
+				if (desc->async_tx.callback) {
+					desc->async_tx.callback(desc->async_tx.callback_param);
+					desc->async_tx.callback = NULL;
+				}
+			}
+
+			if (desc->async_tx.phys != phys_complete) {
+				/*
+				 * a completed entry, but not the last, so clean
+				 * up if the client is done with the descriptor
+				 */
+				if (desc->async_tx.ack) {
+					list_del(&desc->node);
+					list_add_tail(&desc->node,
+						      &ioat_chan->free_desc);
+				} else
+					desc->async_tx.cookie = 0;
+			} else {
+				/*
+				 * last used desc. Do not remove, so we can
+				 * append from it, but don't look at it next
+				 * time, either
+				 */
+				desc->async_tx.cookie = 0;
+
+				/* TODO check status bits? */
+				break;
 			}
 		}
-
-		if (desc->async_tx.phys != phys_complete) {
-			/*
-			 * a completed entry, but not the last, so cleanup
-			 * if the client is done with the descriptor
-			 */
-			if (desc->async_tx.ack) {
-				list_del(&desc->node);
-				list_add_tail(&desc->node,
-					      &ioat_chan->free_desc);
-			} else
-				desc->async_tx.cookie = 0;
-		} else {
-			/*
-			 * last used desc. Do not remove, so we can append from
-			 * it, but don't look at it next time, either
-			 */
-			desc->async_tx.cookie = 0;
-
-			/* TODO check status bits? */
+		break;
+	case IOAT_VER_2_0:
+		/* has some other thread has already cleaned up? */
+		if (ioat_chan->used_desc.prev == NULL)
 			break;
+
+		/* work backwards to find latest finished desc */
+		desc = to_ioat_desc(ioat_chan->used_desc.next);
+		latest_desc = NULL;
+		do {
+			desc = to_ioat_desc(desc->node.prev);
+			desc_phys = (unsigned long)desc->async_tx.phys
+				       & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
+			if (desc_phys == phys_complete) {
+				latest_desc = desc;
+				break;
+			}
+		} while (&desc->node != ioat_chan->used_desc.prev);
+
+		if (latest_desc != NULL) {
+
+			/* work forwards to clear finished descriptors */
+			for (desc = to_ioat_desc(ioat_chan->used_desc.prev);
+			     &desc->node != latest_desc->node.next &&
+			     &desc->node != ioat_chan->used_desc.next;
+			     desc = to_ioat_desc(desc->node.next)) {
+				if (desc->async_tx.cookie) {
+					cookie = desc->async_tx.cookie;
+					desc->async_tx.cookie = 0;
+
+					pci_unmap_page(ioat_chan->device->pdev,
+						      pci_unmap_addr(desc, dst),
+						      pci_unmap_len(desc, len),
+						      PCI_DMA_FROMDEVICE);
+					pci_unmap_page(ioat_chan->device->pdev,
+						      pci_unmap_addr(desc, src),
+						      pci_unmap_len(desc, len),
+						      PCI_DMA_TODEVICE);
+
+					if (desc->async_tx.callback) {
+						desc->async_tx.callback(desc->async_tx.callback_param);
+						desc->async_tx.callback = NULL;
+					}
+				}
+			}
+
+			/* move used.prev up beyond those that are finished */
+			if (&desc->node == ioat_chan->used_desc.next)
+				ioat_chan->used_desc.prev = NULL;
+			else
+				ioat_chan->used_desc.prev = &desc->node;
 		}
+		break;
 	}
 
 	spin_unlock_bh(&ioat_chan->desc_lock);
@@ -621,8 +971,6 @@
 	return dma_async_is_complete(cookie, last_complete, last_used);
 }
 
-/* PCI API */
-
 static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
 {
 	struct ioat_desc_sw *desc;
@@ -633,21 +981,34 @@
 	desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL
 				| IOAT_DMA_DESCRIPTOR_CTL_INT_GN
 				| IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
-	desc->hw->next = 0;
 	desc->hw->size = 0;
 	desc->hw->src_addr = 0;
 	desc->hw->dst_addr = 0;
 	desc->async_tx.ack = 1;
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		desc->hw->next = 0;
+		list_add_tail(&desc->node, &ioat_chan->used_desc);
 
-	list_add_tail(&desc->node, &ioat_chan->used_desc);
+		writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
+		       ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
+		writel(((u64) desc->async_tx.phys) >> 32,
+		       ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
+
+		writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
+			+ IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
+		break;
+	case IOAT_VER_2_0:
+		writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
+		       ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
+		writel(((u64) desc->async_tx.phys) >> 32,
+		       ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
+
+		ioat_chan->dmacount++;
+		__ioat2_dma_memcpy_issue_pending(ioat_chan);
+		break;
+	}
 	spin_unlock_bh(&ioat_chan->desc_lock);
-
-	writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
-	       ioat_chan->reg_base + IOAT_CHAINADDR_OFFSET_LOW);
-	writel(((u64) desc->async_tx.phys) >> 32,
-	       ioat_chan->reg_base + IOAT_CHAINADDR_OFFSET_HIGH);
-
-	writeb(IOAT_CHANCMD_START, ioat_chan->reg_base + IOAT_CHANCMD_OFFSET);
 }
 
 /*
@@ -693,14 +1054,14 @@
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (ioat_dma_alloc_chan_resources(dma_chan) < 1) {
+	if (device->common.device_alloc_chan_resources(dma_chan) < 1) {
 		dev_err(&device->pdev->dev,
 			"selftest cannot allocate chan resource\n");
 		err = -ENODEV;
 		goto out;
 	}
 
-	tx = ioat_dma_prep_memcpy(dma_chan, IOAT_TEST_SIZE, 0);
+	tx = device->common.device_prep_dma_memcpy(dma_chan, IOAT_TEST_SIZE, 0);
 	if (!tx) {
 		dev_err(&device->pdev->dev,
 			"Self-test prep failed, disabling\n");
@@ -710,24 +1071,25 @@
 
 	async_tx_ack(tx);
 	addr = dma_map_single(dma_chan->device->dev, src, IOAT_TEST_SIZE,
-			DMA_TO_DEVICE);
-	ioat_set_src(addr, tx, 0);
+			      DMA_TO_DEVICE);
+	tx->tx_set_src(addr, tx, 0);
 	addr = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
-			DMA_FROM_DEVICE);
-	ioat_set_dest(addr, tx, 0);
+			      DMA_FROM_DEVICE);
+	tx->tx_set_dest(addr, tx, 0);
 	tx->callback = ioat_dma_test_callback;
 	tx->callback_param = (void *)0x8086;
-	cookie = ioat_tx_submit(tx);
+	cookie = tx->tx_submit(tx);
 	if (cookie < 0) {
 		dev_err(&device->pdev->dev,
 			"Self-test setup failed, disabling\n");
 		err = -ENODEV;
 		goto free_resources;
 	}
-	ioat_dma_memcpy_issue_pending(dma_chan);
+	device->common.device_issue_pending(dma_chan);
 	msleep(1);
 
-	if (ioat_dma_is_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+					!= DMA_SUCCESS) {
 		dev_err(&device->pdev->dev,
 			"Self-test copy timed out, disabling\n");
 		err = -ENODEV;
@@ -741,7 +1103,7 @@
 	}
 
 free_resources:
-	ioat_dma_free_chan_resources(dma_chan);
+	device->common.device_free_chan_resources(dma_chan);
 out:
 	kfree(src);
 	kfree(dest);
@@ -941,16 +1303,28 @@
 	INIT_LIST_HEAD(&device->common.channels);
 	ioat_dma_enumerate_channels(device);
 
-	dma_cap_set(DMA_MEMCPY, device->common.cap_mask);
 	device->common.device_alloc_chan_resources =
 						ioat_dma_alloc_chan_resources;
 	device->common.device_free_chan_resources =
 						ioat_dma_free_chan_resources;
-	device->common.device_prep_dma_memcpy = ioat_dma_prep_memcpy;
-	device->common.device_is_tx_complete = ioat_dma_is_complete;
-	device->common.device_issue_pending = ioat_dma_memcpy_issue_pending;
-	device->common.device_dependency_added = ioat_dma_dependency_added;
 	device->common.dev = &pdev->dev;
+
+	dma_cap_set(DMA_MEMCPY, device->common.cap_mask);
+	device->common.device_is_tx_complete = ioat_dma_is_complete;
+	device->common.device_dependency_added = ioat_dma_dependency_added;
+	switch (device->version) {
+	case IOAT_VER_1_2:
+		device->common.device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
+		device->common.device_issue_pending =
+						ioat1_dma_memcpy_issue_pending;
+		break;
+	case IOAT_VER_2_0:
+		device->common.device_prep_dma_memcpy = ioat2_dma_prep_memcpy;
+		device->common.device_issue_pending =
+						ioat2_dma_memcpy_issue_pending;
+		break;
+	}
+
 	dev_err(&device->pdev->dev,
 		"Intel(R) I/OAT DMA Engine found,"
 		" %d channels, device version 0x%02x, driver version %s\n",
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index 5f9881e7..b668234 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -28,7 +28,7 @@
 #include <linux/cache.h>
 #include <linux/pci_ids.h>
 
-#define IOAT_DMA_VERSION "1.26"
+#define IOAT_DMA_VERSION  "2.04"
 
 enum ioat_interrupt {
 	none = 0,
@@ -39,6 +39,8 @@
 };
 
 #define IOAT_LOW_COMPLETION_MASK	0xffffffc0
+#define IOAT_DMA_DCA_ANY_CPU		~0
+
 
 /**
  * struct ioatdma_device - internal representation of a IOAT device
@@ -47,6 +49,9 @@
  * @dma_pool: for allocating DMA descriptors
  * @common: embedded struct dma_device
  * @version: version of ioatdma device
+ * @irq_mode: which style irq to use
+ * @msix_entries: irq handlers
+ * @idx: per channel data
  */
 
 struct ioatdma_device {
@@ -63,23 +68,7 @@
 
 /**
  * struct ioat_dma_chan - internal representation of a DMA channel
- * @device:
- * @reg_base:
- * @sw_in_use:
- * @completion:
- * @completion_low:
- * @completion_high:
- * @completed_cookie: last cookie seen completed on cleanup
- * @cookie: value of last cookie given to client
- * @last_completion:
- * @xfercap:
- * @desc_lock:
- * @free_desc:
- * @used_desc:
- * @resource:
- * @device_node:
  */
-
 struct ioat_dma_chan {
 
 	void __iomem *reg_base;
@@ -95,6 +84,8 @@
 	struct list_head used_desc;
 
 	int pending;
+	int dmacount;
+	int desccount;
 
 	struct ioatdma_device *device;
 	struct dma_chan common;
@@ -134,12 +125,13 @@
 struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 				      void __iomem *iobase);
 void ioat_dma_remove(struct ioatdma_device *device);
-struct dca_provider *ioat_dca_init(struct pci_dev *pdev,
-				   void __iomem *iobase);
+struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
 #else
 #define ioat_dma_probe(pdev, iobase)    NULL
 #define ioat_dma_remove(device)         do { } while (0)
 #define ioat_dca_init(pdev, iobase)	NULL
+#define ioat2_dca_init(pdev, iobase)	NULL
 #endif
 
 #endif /* IOATDMA_H */
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index 9e7434e..dd470fa 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -22,12 +22,19 @@
 #define _IOAT_HW_H_
 
 /* PCI Configuration Space Values */
-#define IOAT_PCI_VID			0x8086
-#define IOAT_PCI_DID			0x1A38
-#define IOAT_PCI_RID			0x00
-#define IOAT_PCI_SVID			0x8086
-#define IOAT_PCI_SID			0x8086
-#define IOAT_VER_1_2			0x12	/* Version 1.2 */
+#define IOAT_PCI_VID            0x8086
+
+/* CB device ID's */
+#define IOAT_PCI_DID_5000       0x1A38
+#define IOAT_PCI_DID_CNB        0x360B
+#define IOAT_PCI_DID_SCNB       0x65FF
+#define IOAT_PCI_DID_SNB        0x402F
+
+#define IOAT_PCI_RID            0x00
+#define IOAT_PCI_SVID           0x8086
+#define IOAT_PCI_SID            0x8086
+#define IOAT_VER_1_2            0x12    /* Version 1.2 */
+#define IOAT_VER_2_0            0x20    /* Version 2.0 */
 
 struct ioat_dma_descriptor {
 	uint32_t	size;
@@ -47,6 +54,16 @@
 #define IOAT_DMA_DESCRIPTOR_CTL_CP_STS	0x00000008
 #define IOAT_DMA_DESCRIPTOR_CTL_FRAME	0x00000010
 #define IOAT_DMA_DESCRIPTOR_NUL		0x00000020
-#define IOAT_DMA_DESCRIPTOR_OPCODE	0xFF000000
+#define IOAT_DMA_DESCRIPTOR_CTL_SP_BRK	0x00000040
+#define IOAT_DMA_DESCRIPTOR_CTL_DP_BRK	0x00000080
+#define IOAT_DMA_DESCRIPTOR_CTL_BNDL	0x00000100
+#define IOAT_DMA_DESCRIPTOR_CTL_DCA	0x00000200
+#define IOAT_DMA_DESCRIPTOR_CTL_BUFHINT	0x00000400
+
+#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_CONTEXT	0xFF000000
+#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_DMA	0x00000000
+
+#define IOAT_DMA_DESCRIPTOR_CTL_CONTEXT_DCA	0x00000001
+#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_MASK	0xFF000000
 
 #endif
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index baaab5e..9832d7e 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -42,26 +42,25 @@
 #define IOAT_INTRCTRL_MASTER_INT_EN		0x01	/* Master Interrupt Enable */
 #define IOAT_INTRCTRL_INT_STATUS		0x02	/* ATTNSTATUS -or- Channel Int */
 #define IOAT_INTRCTRL_INT			0x04	/* INT_STATUS -and- MASTER_INT_EN */
-#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL	0x08    /* Enable all MSI-X vectors */
+#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL	0x08	/* Enable all MSI-X vectors */
 
 #define IOAT_ATTNSTATUS_OFFSET			0x04	/* Each bit is a channel */
 
 #define IOAT_VER_OFFSET				0x08	/*  8-bit */
 #define IOAT_VER_MAJOR_MASK			0xF0
 #define IOAT_VER_MINOR_MASK			0x0F
-#define GET_IOAT_VER_MAJOR(x)			((x) & IOAT_VER_MAJOR_MASK)
+#define GET_IOAT_VER_MAJOR(x)			(((x) & IOAT_VER_MAJOR_MASK) >> 4)
 #define GET_IOAT_VER_MINOR(x)			((x) & IOAT_VER_MINOR_MASK)
 
 #define IOAT_PERPORTOFFSET_OFFSET		0x0A	/* 16-bit */
 
 #define IOAT_INTRDELAY_OFFSET			0x0C	/* 16-bit */
 #define IOAT_INTRDELAY_INT_DELAY_MASK		0x3FFF	/* Interrupt Delay Time */
-#define IOAT_INTRDELAY_COALESE_SUPPORT		0x8000	/* Interrupt Coalesing Supported */
+#define IOAT_INTRDELAY_COALESE_SUPPORT		0x8000	/* Interrupt Coalescing Supported */
 
 #define IOAT_DEVICE_STATUS_OFFSET		0x0E	/* 16-bit */
 #define IOAT_DEVICE_STATUS_DEGRADED_MODE	0x0001
 
-
 #define IOAT_CHANNEL_MMIO_SIZE			0x80	/* Each Channel MMIO space is this size */
 
 /* DMA Channel Registers */
@@ -74,25 +73,101 @@
 #define IOAT_CHANCTRL_ERR_COMPLETION_EN		0x0004
 #define IOAT_CHANCTRL_INT_DISABLE		0x0001
 
-#define IOAT_DMA_COMP_OFFSET			0x02	/* 16-bit DMA channel compatability */
-#define IOAT_DMA_COMP_V1			0x0001	/* Compatability with DMA version 1 */
+#define IOAT_DMA_COMP_OFFSET			0x02	/* 16-bit DMA channel compatibility */
+#define IOAT_DMA_COMP_V1			0x0001	/* Compatibility with DMA version 1 */
+#define IOAT_DMA_COMP_V2			0x0002	/* Compatibility with DMA version 2 */
 
-#define IOAT_CHANSTS_OFFSET			0x04	/* 64-bit Channel Status Register */
-#define IOAT_CHANSTS_OFFSET_LOW			0x04
-#define IOAT_CHANSTS_OFFSET_HIGH		0x08
-#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR	0xFFFFFFFFFFFFFFC0UL
+
+#define IOAT1_CHANSTS_OFFSET		0x04	/* 64-bit Channel Status Register */
+#define IOAT2_CHANSTS_OFFSET		0x08	/* 64-bit Channel Status Register */
+#define IOAT_CHANSTS_OFFSET(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
+#define IOAT1_CHANSTS_OFFSET_LOW	0x04
+#define IOAT2_CHANSTS_OFFSET_LOW	0x08
+#define IOAT_CHANSTS_OFFSET_LOW(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
+#define IOAT1_CHANSTS_OFFSET_HIGH	0x08
+#define IOAT2_CHANSTS_OFFSET_HIGH	0x0C
+#define IOAT_CHANSTS_OFFSET_HIGH(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
+#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR	~0x3F
 #define IOAT_CHANSTS_SOFT_ERR			0x0000000000000010
+#define IOAT_CHANSTS_UNAFFILIATED_ERR		0x0000000000000008
 #define IOAT_CHANSTS_DMA_TRANSFER_STATUS	0x0000000000000007
 #define IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE	0x0
 #define IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE	0x1
 #define IOAT_CHANSTS_DMA_TRANSFER_STATUS_SUSPENDED	0x2
 #define IOAT_CHANSTS_DMA_TRANSFER_STATUS_HALTED	0x3
 
-#define IOAT_CHAINADDR_OFFSET			0x0C	/* 64-bit Descriptor Chain Address Register */
-#define IOAT_CHAINADDR_OFFSET_LOW		0x0C
-#define IOAT_CHAINADDR_OFFSET_HIGH		0x10
 
-#define IOAT_CHANCMD_OFFSET			0x14	/*  8-bit DMA Channel Command Register */
+
+#define IOAT_CHAN_DMACOUNT_OFFSET	0x06    /* 16-bit DMA Count register */
+
+#define IOAT_DCACTRL_OFFSET         0x30   /* 32 bit Direct Cache Access Control Register */
+#define IOAT_DCACTRL_CMPL_WRITE_ENABLE 0x10000
+#define IOAT_DCACTRL_TARGET_CPU_MASK   0xFFFF /* APIC ID */
+
+/* CB DCA Memory Space Registers */
+#define IOAT_DCAOFFSET_OFFSET       0x14
+/* CB_BAR + IOAT_DCAOFFSET value */
+#define IOAT_DCA_VER_OFFSET         0x00
+#define IOAT_DCA_VER_MAJOR_MASK     0xF0
+#define IOAT_DCA_VER_MINOR_MASK     0x0F
+
+#define IOAT_DCA_COMP_OFFSET        0x02
+#define IOAT_DCA_COMP_V1            0x1
+
+#define IOAT_FSB_CAPABILITY_OFFSET  0x04
+#define IOAT_FSB_CAPABILITY_PREFETCH    0x1
+
+#define IOAT_PCI_CAPABILITY_OFFSET  0x06
+#define IOAT_PCI_CAPABILITY_MEMWR   0x1
+
+#define IOAT_FSB_CAP_ENABLE_OFFSET  0x08
+#define IOAT_FSB_CAP_ENABLE_PREFETCH    0x1
+
+#define IOAT_PCI_CAP_ENABLE_OFFSET  0x0A
+#define IOAT_PCI_CAP_ENABLE_MEMWR   0x1
+
+#define IOAT_APICID_TAG_MAP_OFFSET  0x0C
+#define IOAT_APICID_TAG_MAP_TAG0    0x0000000F
+#define IOAT_APICID_TAG_MAP_TAG0_SHIFT 0
+#define IOAT_APICID_TAG_MAP_TAG1    0x000000F0
+#define IOAT_APICID_TAG_MAP_TAG1_SHIFT 4
+#define IOAT_APICID_TAG_MAP_TAG2    0x00000F00
+#define IOAT_APICID_TAG_MAP_TAG2_SHIFT 8
+#define IOAT_APICID_TAG_MAP_TAG3    0x0000F000
+#define IOAT_APICID_TAG_MAP_TAG3_SHIFT 12
+#define IOAT_APICID_TAG_MAP_TAG4    0x000F0000
+#define IOAT_APICID_TAG_MAP_TAG4_SHIFT 16
+#define IOAT_APICID_TAG_CB2_VALID   0x8080808080
+
+#define IOAT_DCA_GREQID_OFFSET      0x10
+#define IOAT_DCA_GREQID_SIZE        0x04
+#define IOAT_DCA_GREQID_MASK        0xFFFF
+#define IOAT_DCA_GREQID_IGNOREFUN   0x10000000
+#define IOAT_DCA_GREQID_VALID       0x20000000
+#define IOAT_DCA_GREQID_LASTID      0x80000000
+
+
+
+#define IOAT1_CHAINADDR_OFFSET		0x0C	/* 64-bit Descriptor Chain Address Register */
+#define IOAT2_CHAINADDR_OFFSET		0x10	/* 64-bit Descriptor Chain Address Register */
+#define IOAT_CHAINADDR_OFFSET(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHAINADDR_OFFSET : IOAT2_CHAINADDR_OFFSET)
+#define IOAT1_CHAINADDR_OFFSET_LOW	0x0C
+#define IOAT2_CHAINADDR_OFFSET_LOW	0x10
+#define IOAT_CHAINADDR_OFFSET_LOW(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHAINADDR_OFFSET_LOW : IOAT2_CHAINADDR_OFFSET_LOW)
+#define IOAT1_CHAINADDR_OFFSET_HIGH	0x10
+#define IOAT2_CHAINADDR_OFFSET_HIGH	0x14
+#define IOAT_CHAINADDR_OFFSET_HIGH(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHAINADDR_OFFSET_HIGH : IOAT2_CHAINADDR_OFFSET_HIGH)
+
+#define IOAT1_CHANCMD_OFFSET		0x14	/*  8-bit DMA Channel Command Register */
+#define IOAT2_CHANCMD_OFFSET		0x04	/*  8-bit DMA Channel Command Register */
+#define IOAT_CHANCMD_OFFSET(ver)		((ver) < IOAT_VER_2_0 \
+						? IOAT1_CHANCMD_OFFSET : IOAT2_CHANCMD_OFFSET)
 #define IOAT_CHANCMD_RESET			0x20
 #define IOAT_CHANCMD_RESUME			0x10
 #define IOAT_CHANCMD_ABORT			0x08
@@ -124,6 +199,7 @@
 #define IOAT_CHANERR_COMPLETION_ADDR_ERR	0x1000
 #define IOAT_CHANERR_INT_CONFIGURATION_ERR	0x2000
 #define IOAT_CHANERR_SOFT_ERR			0x4000
+#define IOAT_CHANERR_UNAFFILIATED_ERR		0x8000
 
 #define IOAT_CHANERR_MASK_OFFSET		0x2C	/* 32-bit Channel Error Register */
 
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 96f7e63..a1f24c4 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1462,7 +1462,7 @@
  *
  */
 static struct pci_driver i5000_driver = {
-	.name = __stringify(KBUILD_BASENAME),
+	.name = KBUILD_BASENAME,
 	.probe = i5000_init_one,
 	.remove = __devexit_p(i5000_remove_one),
 	.id_table = i5000_pci_tbl,
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 5596df6..624ff3e 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -650,13 +650,14 @@
 	if (sbp2_send_management_orb(lu, node_id, generation,
 				SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
 		if (lu->retries++ < 5) {
-			queue_delayed_work(sbp2_wq, &lu->work,
-					   DIV_ROUND_UP(HZ, 5));
+			if (queue_delayed_work(sbp2_wq, &lu->work,
+					       DIV_ROUND_UP(HZ, 5)))
+				kref_get(&lu->tgt->kref);
 		} else {
 			fw_error("failed to login to %s LUN %04x\n",
 				 unit->device.bus_id, lu->lun);
-			kref_put(&lu->tgt->kref, sbp2_release_target);
 		}
+		kref_put(&lu->tgt->kref, sbp2_release_target);
 		return;
 	}
 
@@ -914,7 +915,9 @@
 			lu->retries = 0;
 			PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
 		}
-		queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5));
+		if (queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5)))
+			kref_get(&lu->tgt->kref);
+		kref_put(&lu->tgt->kref, sbp2_release_target);
 		return;
 	}
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 700a165..a0445be 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -216,6 +216,16 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1621.
 
+config SENSORS_I5K_AMB
+	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
+	depends on PCI && EXPERIMENTAL
+	help
+	  If you say yes here you get support for FB-DIMM AMB temperature
+	  monitoring chips on systems with the Intel 5000 series chipset.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i5k_amb.
+
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 	depends on EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6da3eef..55595f6 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -38,6 +38,7 @@
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
 obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
+obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
 obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index cb2331b..d9f04ce 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -503,7 +503,7 @@
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "unknown", {
+	{ 0x001A, "Abit IP35 Pro", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -530,6 +530,60 @@
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
+	{ 0x001B, "unknown", {
+		{ "CPU Core",		 0, 0, 10, 1, 0 },
+		{ "DDR3",		 1, 0, 20, 1, 0 },
+		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
+		{ "CPU VTT",		 3, 0, 10, 1, 0 },
+		{ "MCH 1.25V",		 4, 0, 10, 1, 0 },
+		{ "ICHIO 1.5V",		 5, 0, 10, 1, 0 },
+		{ "ICH 1.05V",		 6, 0, 10, 1, 0 },
+		{ "ATX +12V (24-Pin)",	 7, 0, 60, 1, 0 },
+		{ "ATX +12V (8-pin)",	 8, 0, 60, 1, 0 },
+		{ "ATX +5V",		 9, 0, 30, 1, 0 },
+		{ "+3.3V",		10, 0, 20, 1, 0 },
+		{ "5VSB",		11, 0, 30, 1, 0 },
+		{ "CPU",		24, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM Phase1",		26, 1, 1, 1, 0 },
+		{ "PWM Phase2",		27, 1, 1, 1, 0 },
+		{ "PWM Phase3",		28, 1, 1, 1, 0 },
+		{ "PWM Phase4",		29, 1, 1, 1, 0 },
+		{ "PWM Phase5",		30, 1, 1, 1, 0 },
+		{ "CPU Fan",		32, 2, 60, 1, 0 },
+		{ "SYS Fan",		34, 2, 60, 1, 0 },
+		{ "AUX1 Fan",		33, 2, 60, 1, 0 },
+		{ "AUX2 Fan",		35, 2, 60, 1, 0 },
+		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
+		{ NULL, 0, 0, 0, 0, 0 } }
+	},
+	{ 0x001C, "unknown", {
+		{ "CPU Core",		 0, 0, 10, 1, 0 },
+		{ "DDR2",		 1, 0, 20, 1, 0 },
+		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
+		{ "CPU VTT",		 3, 0, 10, 1, 0 },
+		{ "MCH 1.25V",		 4, 0, 10, 1, 0 },
+		{ "ICHIO 1.5V",		 5, 0, 10, 1, 0 },
+		{ "ICH 1.05V",		 6, 0, 10, 1, 0 },
+		{ "ATX +12V (24-Pin)",	 7, 0, 60, 1, 0 },
+		{ "ATX +12V (8-pin)",	 8, 0, 60, 1, 0 },
+		{ "ATX +5V",		 9, 0, 30, 1, 0 },
+		{ "+3.3V",		10, 0, 20, 1, 0 },
+		{ "5VSB",		11, 0, 30, 1, 0 },
+		{ "CPU",		24, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM Phase1",		26, 1, 1, 1, 0 },
+		{ "PWM Phase2",		27, 1, 1, 1, 0 },
+		{ "PWM Phase3",		28, 1, 1, 1, 0 },
+		{ "PWM Phase4",		29, 1, 1, 1, 0 },
+		{ "PWM Phase5",		30, 1, 1, 1, 0 },
+		{ "CPU Fan",		32, 2, 60, 1, 0 },
+		{ "SYS Fan",		34, 2, 60, 1, 0 },
+		{ "AUX1 Fan",		33, 2, 60, 1, 0 },
+		{ "AUX2 Fan",		35, 2, 60, 1, 0 },
+		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
+		{ NULL, 0, 0, 0, 0, 0 } }
+	},
 	{ 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } }
 };
 
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 1001d2e..86c66c3 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -80,7 +80,7 @@
 /*
  * Temperature sensors keys (sp78 - 2 bytes).
  */
-static const char* temperature_sensors_sets[][13] = {
+static const char* temperature_sensors_sets[][36] = {
 /* Set 0: Macbook Pro */
 	{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
 	  "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
@@ -88,7 +88,13 @@
 	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S",
 	  "Th1H", "Ts0P", NULL },
 /* Set 2: Macmini set */
-	{ "TC0D", "TC0P", NULL }
+	{ "TC0D", "TC0P", NULL },
+/* Set 3: Mac Pro (2 x Quad-Core) */
+	{ "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
+	  "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P",
+	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
+	  "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
+	  "TM9S", "TN0H", "TS0C", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -990,14 +996,18 @@
 
 /*
  * Create the needed functions for each fan using the macro defined above
- * (2 fans are supported)
+ * (4 fans are supported)
  */
 sysfs_fan_speeds_offset(1);
 sysfs_fan_speeds_offset(2);
+sysfs_fan_speeds_offset(3);
+sysfs_fan_speeds_offset(4);
 
 static const struct attribute_group fan_attribute_groups[] = {
 	{ .attrs = fan1_attributes },
-	{ .attrs = fan2_attributes }
+	{ .attrs = fan2_attributes },
+	{ .attrs = fan3_attributes },
+	{ .attrs = fan4_attributes },
 };
 
 /*
@@ -1027,6 +1037,52 @@
 					applesmc_show_temperature, NULL, 10);
 static SENSOR_DEVICE_ATTR(temp12_input, S_IRUGO,
 					applesmc_show_temperature, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp13_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp14_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp15_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp16_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 15);
+static SENSOR_DEVICE_ATTR(temp17_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp18_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp19_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 18);
+static SENSOR_DEVICE_ATTR(temp20_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 19);
+static SENSOR_DEVICE_ATTR(temp21_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 20);
+static SENSOR_DEVICE_ATTR(temp22_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 21);
+static SENSOR_DEVICE_ATTR(temp23_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 22);
+static SENSOR_DEVICE_ATTR(temp24_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 23);
+static SENSOR_DEVICE_ATTR(temp25_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 24);
+static SENSOR_DEVICE_ATTR(temp26_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 25);
+static SENSOR_DEVICE_ATTR(temp27_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 26);
+static SENSOR_DEVICE_ATTR(temp28_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 27);
+static SENSOR_DEVICE_ATTR(temp29_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 28);
+static SENSOR_DEVICE_ATTR(temp30_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 29);
+static SENSOR_DEVICE_ATTR(temp31_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 30);
+static SENSOR_DEVICE_ATTR(temp32_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 31);
+static SENSOR_DEVICE_ATTR(temp33_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 32);
+static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 33);
+static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
+					applesmc_show_temperature, NULL, 34);
 
 static struct attribute *temperature_attributes[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -1041,6 +1097,29 @@
 	&sensor_dev_attr_temp10_input.dev_attr.attr,
 	&sensor_dev_attr_temp11_input.dev_attr.attr,
 	&sensor_dev_attr_temp12_input.dev_attr.attr,
+	&sensor_dev_attr_temp13_input.dev_attr.attr,
+	&sensor_dev_attr_temp14_input.dev_attr.attr,
+	&sensor_dev_attr_temp15_input.dev_attr.attr,
+	&sensor_dev_attr_temp16_input.dev_attr.attr,
+	&sensor_dev_attr_temp17_input.dev_attr.attr,
+	&sensor_dev_attr_temp18_input.dev_attr.attr,
+	&sensor_dev_attr_temp19_input.dev_attr.attr,
+	&sensor_dev_attr_temp20_input.dev_attr.attr,
+	&sensor_dev_attr_temp21_input.dev_attr.attr,
+	&sensor_dev_attr_temp22_input.dev_attr.attr,
+	&sensor_dev_attr_temp23_input.dev_attr.attr,
+	&sensor_dev_attr_temp24_input.dev_attr.attr,
+	&sensor_dev_attr_temp25_input.dev_attr.attr,
+	&sensor_dev_attr_temp26_input.dev_attr.attr,
+	&sensor_dev_attr_temp27_input.dev_attr.attr,
+	&sensor_dev_attr_temp28_input.dev_attr.attr,
+	&sensor_dev_attr_temp29_input.dev_attr.attr,
+	&sensor_dev_attr_temp30_input.dev_attr.attr,
+	&sensor_dev_attr_temp31_input.dev_attr.attr,
+	&sensor_dev_attr_temp32_input.dev_attr.attr,
+	&sensor_dev_attr_temp33_input.dev_attr.attr,
+	&sensor_dev_attr_temp34_input.dev_attr.attr,
+	&sensor_dev_attr_temp35_input.dev_attr.attr,
 	NULL
 };
 
@@ -1137,6 +1216,8 @@
 	{ .accelerometer = 1, .light = 0, .temperature_set = 1 },
 /* MacMini: temperature set 2 */
 	{ .accelerometer = 0, .light = 0, .temperature_set = 2 },
+/* MacPro: temperature set 3 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1154,6 +1235,10 @@
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") },
 		(void*)&applesmc_dmi_data[2]},
+	{ applesmc_dmi_match, "Apple MacPro2", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
+		(void*)&applesmc_dmi_data[3]},
 	{ .ident = NULL }
 };
 
@@ -1204,9 +1289,19 @@
 
 		switch (count) {
 		default:
-			printk(KERN_WARNING "applesmc: More than 2 fans found,"
-					" but at most 2 fans are supported"
+			printk(KERN_WARNING "applesmc: More than 4 fans found,"
+					" but at most 4 fans are supported"
 						" by the driver.\n");
+		case 4:
+			ret = sysfs_create_group(&pdev->dev.kobj,
+						 &fan_attribute_groups[3]);
+			if (ret)
+				goto out_key_enumeration;
+		case 3:
+			ret = sysfs_create_group(&pdev->dev.kobj,
+						 &fan_attribute_groups[2]);
+			if (ret)
+				goto out_key_enumeration;
 		case 2:
 			ret = sysfs_create_group(&pdev->dev.kobj,
 						 &fan_attribute_groups[1]);
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 13a0413..6892f76 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -34,6 +34,7 @@
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/f75375s.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
@@ -86,7 +87,7 @@
 
 struct f75375_data {
 	unsigned short addr;
-	struct i2c_client client;
+	struct i2c_client *client;
 	struct device *hwmon_dev;
 
 	const char *name;
@@ -116,13 +117,23 @@
 static int f75375_attach_adapter(struct i2c_adapter *adapter);
 static int f75375_detect(struct i2c_adapter *adapter, int address, int kind);
 static int f75375_detach_client(struct i2c_client *client);
+static int f75375_probe(struct i2c_client *client);
+static int f75375_remove(struct i2c_client *client);
+
+static struct i2c_driver f75375_legacy_driver = {
+	.driver = {
+		.name = "f75375_legacy",
+	},
+	.attach_adapter = f75375_attach_adapter,
+	.detach_client = f75375_detach_client,
+};
 
 static struct i2c_driver f75375_driver = {
 	.driver = {
 		.name = "f75375",
 	},
-	.attach_adapter = f75375_attach_adapter,
-	.detach_client = f75375_detach_client,
+	.probe = f75375_probe,
+	.remove = f75375_remove,
 };
 
 static inline int f75375_read8(struct i2c_client *client, u8 reg)
@@ -276,19 +287,14 @@
 	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
 }
 
-static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
+static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 {
-	int nr = to_sensor_dev_attr(attr)->index;
-	struct i2c_client *client = to_i2c_client(dev);
 	struct f75375_data *data = i2c_get_clientdata(client);
-	int val = simple_strtoul(buf, NULL, 10);
 	u8 fanmode;
 
 	if (val < 0 || val > 4)
 		return -EINVAL;
 
-	mutex_lock(&data->update_lock);
 	fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
 	fanmode = ~(3 << FAN_CTRL_MODE(nr));
 
@@ -310,8 +316,22 @@
 	}
 	f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
 	data->pwm_enable[nr] = val;
+	return 0;
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+	int err = 0;
+
+	mutex_lock(&data->update_lock);
+	err = set_pwm_enable_direct(client, nr, val);
 	mutex_unlock(&data->update_lock);
-	return count;
+	return err ? err : count;
 }
 
 static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
@@ -323,7 +343,7 @@
 	int val = simple_strtoul(buf, NULL, 10);
 	u8 conf = 0;
 
-	if (val != 0 || val != 1 || data->kind == f75373)
+	if (!(val == 0 || val == 1))
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
@@ -529,13 +549,13 @@
 	show_pwm, set_pwm, 0);
 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
 	show_pwm_enable, set_pwm_enable, 0);
-static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO|S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO,
 	show_pwm_mode, set_pwm_mode, 0);
 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
 	show_pwm, set_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
 	show_pwm_enable, set_pwm_enable, 1);
-static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO|S_IWUSR,
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO,
 	show_pwm_mode, set_pwm_mode, 1);
 
 static struct attribute *f75375_attributes[] = {
@@ -580,12 +600,9 @@
 
 static int f75375_detach_client(struct i2c_client *client)
 {
-	struct f75375_data *data = i2c_get_clientdata(client);
 	int err;
 
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &f75375_group);
-
+	f75375_remove(client);
 	err = i2c_detach_client(client);
 	if (err) {
 		dev_err(&client->dev,
@@ -593,7 +610,91 @@
 			"client not detached.\n");
 		return err;
 	}
+	kfree(client);
+	return 0;
+}
+
+static void f75375_init(struct i2c_client *client, struct f75375_data *data,
+		struct f75375s_platform_data *f75375s_pdata)
+{
+	int nr;
+	set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
+	set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
+	for (nr = 0; nr < 2; nr++) {
+		data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
+		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+			data->pwm[nr]);
+	}
+
+}
+
+static int f75375_probe(struct i2c_client *client)
+{
+	struct f75375_data *data = i2c_get_clientdata(client);
+	struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+	if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL)))
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	if (strcmp(client->name, "f75375") == 0)
+		data->kind = f75375;
+	else if (strcmp(client->name, "f75373") == 0)
+		data->kind = f75373;
+	else {
+		dev_err(&client->dev, "Unsupported device: %s\n", client->name);
+		return -ENODEV;
+	}
+
+	if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
+		goto exit_free;
+
+	if (data->kind == f75375) {
+		err = sysfs_chmod_file(&client->dev.kobj,
+			&sensor_dev_attr_pwm1_mode.dev_attr.attr,
+			S_IRUGO | S_IWUSR);
+		if (err)
+			goto exit_remove;
+		err = sysfs_chmod_file(&client->dev.kobj,
+			&sensor_dev_attr_pwm2_mode.dev_attr.attr,
+			S_IRUGO | S_IWUSR);
+		if (err)
+			goto exit_remove;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	if (f75375s_pdata != NULL)
+		f75375_init(client, data, f75375s_pdata);
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &f75375_group);
+exit_free:
 	kfree(data);
+	i2c_set_clientdata(client, NULL);
+	return err;
+}
+
+static int f75375_remove(struct i2c_client *client)
+{
+	struct f75375_data *data = i2c_get_clientdata(client);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &f75375_group);
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
@@ -608,20 +709,17 @@
 static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
 {
 	struct i2c_client *client;
-	struct f75375_data *data;
 	u8 version = 0;
 	int err = 0;
 	const char *name = "";
 
-	if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL))) {
+	if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	client = &data->client;
-	i2c_set_clientdata(client, data);
 	client->addr = address;
 	client->adapter = adapter;
-	client->driver = &f75375_driver;
+	client->driver = &f75375_legacy_driver;
 
 	if (kind < 0) {
 		u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
@@ -644,42 +742,42 @@
 	} else if (kind == f75373) {
 		name = "f75373";
 	}
-
 	dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
 	strlcpy(client->name, name, I2C_NAME_SIZE);
-	data->kind = kind;
-	mutex_init(&data->update_lock);
+
 	if ((err = i2c_attach_client(client)))
 		goto exit_free;
 
-	if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
+	if ((err = f75375_probe(client)) < 0)
 		goto exit_detach;
 
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
-
 	return 0;
 
-exit_remove:
-	sysfs_remove_group(&client->dev.kobj, &f75375_group);
 exit_detach:
 	i2c_detach_client(client);
 exit_free:
-	kfree(data);
+	kfree(client);
 exit:
 	return err;
 }
 
 static int __init sensors_f75375_init(void)
 {
-	return i2c_add_driver(&f75375_driver);
+	int status;
+	status = i2c_add_driver(&f75375_driver);
+	if (status)
+		return status;
+
+	status = i2c_add_driver(&f75375_legacy_driver);
+	if (status)
+		i2c_del_driver(&f75375_driver);
+
+	return status;
 }
 
 static void __exit sensors_f75375_exit(void)
 {
+	i2c_del_driver(&f75375_legacy_driver);
 	i2c_del_driver(&f75375_driver);
 }
 
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
new file mode 100644
index 0000000..6ac5c6f
--- /dev/null
+++ b/drivers/hwmon/i5k_amb.c
@@ -0,0 +1,552 @@
+/*
+ * A hwmon driver for the Intel 5000 series chipset FB-DIMM AMB
+ * temperature sensors
+ * Copyright (C) 2007 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#define DRVNAME "i5k_amb"
+
+#define I5K_REG_AMB_BASE_ADDR		0x48
+#define I5K_REG_AMB_LEN_ADDR		0x50
+#define I5K_REG_CHAN0_PRESENCE_ADDR	0x64
+#define I5K_REG_CHAN1_PRESENCE_ADDR	0x66
+
+#define AMB_REG_TEMP_MIN_ADDR		0x80
+#define AMB_REG_TEMP_MID_ADDR		0x81
+#define AMB_REG_TEMP_MAX_ADDR		0x82
+#define AMB_REG_TEMP_STATUS_ADDR	0x84
+#define AMB_REG_TEMP_ADDR		0x85
+
+#define AMB_CONFIG_SIZE			2048
+#define AMB_FUNC_3_OFFSET		768
+
+static unsigned long amb_reg_temp_status(unsigned int amb)
+{
+	return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_STATUS_ADDR +
+	       AMB_CONFIG_SIZE * amb;
+}
+
+static unsigned long amb_reg_temp_min(unsigned int amb)
+{
+	return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MIN_ADDR +
+	       AMB_CONFIG_SIZE * amb;
+}
+
+static unsigned long amb_reg_temp_mid(unsigned int amb)
+{
+	return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MID_ADDR +
+	       AMB_CONFIG_SIZE * amb;
+}
+
+static unsigned long amb_reg_temp_max(unsigned int amb)
+{
+	return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_MAX_ADDR +
+	       AMB_CONFIG_SIZE * amb;
+}
+
+static unsigned long amb_reg_temp(unsigned int amb)
+{
+	return AMB_FUNC_3_OFFSET + AMB_REG_TEMP_ADDR +
+	       AMB_CONFIG_SIZE * amb;
+}
+
+#define MAX_MEM_CHANNELS		4
+#define MAX_AMBS_PER_CHANNEL		16
+#define MAX_AMBS			(MAX_MEM_CHANNELS * \
+					 MAX_AMBS_PER_CHANNEL)
+/*
+ * Ugly hack: For some reason the highest bit is set if there
+ * are _any_ DIMMs in the channel.  Attempting to read from
+ * this "high-order" AMB results in a memory bus error, so
+ * for now we'll just ignore that top bit, even though that
+ * might prevent us from seeing the 16th DIMM in the channel.
+ */
+#define REAL_MAX_AMBS_PER_CHANNEL	15
+#define KNOBS_PER_AMB			5
+
+static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
+{
+	return byte_num * MAX_AMBS_PER_CHANNEL + bit;
+}
+
+#define AMB_SYSFS_NAME_LEN		16
+struct i5k_device_attribute {
+	struct sensor_device_attribute s_attr;
+	char name[AMB_SYSFS_NAME_LEN];
+};
+
+struct i5k_amb_data {
+	struct device *hwmon_dev;
+
+	unsigned long amb_base;
+	unsigned long amb_len;
+	u16 amb_present[MAX_MEM_CHANNELS];
+	void __iomem *amb_mmio;
+	struct i5k_device_attribute *attrs;
+	unsigned int num_attrs;
+};
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	return sprintf(buf, "%s\n", DRVNAME);
+}
+
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct platform_device *amb_pdev;
+
+static u8 amb_read_byte(struct i5k_amb_data *data, unsigned long offset)
+{
+	return ioread8(data->amb_mmio + offset);
+}
+
+static void amb_write_byte(struct i5k_amb_data *data, unsigned long offset,
+			   u8 val)
+{
+	iowrite8(val, data->amb_mmio + offset);
+}
+
+static ssize_t show_amb_alarm(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+
+	if (!(amb_read_byte(data, amb_reg_temp_status(attr->index)) & 0x20) &&
+	     (amb_read_byte(data, amb_reg_temp_status(attr->index)) & 0x8))
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t store_amb_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
+
+	if (temp > 255)
+		temp = 255;
+
+	amb_write_byte(data, amb_reg_temp_min(attr->index), temp);
+	return count;
+}
+
+static ssize_t store_amb_mid(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
+
+	if (temp > 255)
+		temp = 255;
+
+	amb_write_byte(data, amb_reg_temp_mid(attr->index), temp);
+	return count;
+}
+
+static ssize_t store_amb_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	unsigned long temp = simple_strtoul(buf, NULL, 10) / 500;
+
+	if (temp > 255)
+		temp = 255;
+
+	amb_write_byte(data, amb_reg_temp_max(attr->index), temp);
+	return count;
+}
+
+static ssize_t show_amb_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		500 * amb_read_byte(data, amb_reg_temp_min(attr->index)));
+}
+
+static ssize_t show_amb_mid(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		500 * amb_read_byte(data, amb_reg_temp_mid(attr->index)));
+}
+
+static ssize_t show_amb_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		500 * amb_read_byte(data, amb_reg_temp_max(attr->index)));
+}
+
+static ssize_t show_amb_temp(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i5k_amb_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n",
+		500 * amb_read_byte(data, amb_reg_temp(attr->index)));
+}
+
+static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
+{
+	int i, j, k, d = 0;
+	u16 c;
+	int res = 0;
+	int num_ambs = 0;
+	struct i5k_amb_data *data = platform_get_drvdata(pdev);
+
+	/* Count the number of AMBs found */
+	/* ignore the high-order bit, see "Ugly hack" comment above */
+	for (i = 0; i < MAX_MEM_CHANNELS; i++)
+		num_ambs += hweight16(data->amb_present[i] & 0x7fff);
+
+	/* Set up sysfs stuff */
+	data->attrs = kzalloc(sizeof(*data->attrs) * num_ambs * KNOBS_PER_AMB,
+				GFP_KERNEL);
+	if (!data->attrs)
+		return -ENOMEM;
+	data->num_attrs = 0;
+
+	for (i = 0; i < MAX_MEM_CHANNELS; i++) {
+		c = data->amb_present[i];
+		for (j = 0; j < REAL_MAX_AMBS_PER_CHANNEL; j++, c >>= 1) {
+			struct i5k_device_attribute *iattr;
+
+			k = amb_num_from_reg(i, j);
+			if (!(c & 0x1))
+				continue;
+			d++;
+
+			/* Temperature sysfs knob */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_input", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_amb_temp;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
+			/* Temperature min sysfs knob */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_min", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_amb_min;
+			iattr->s_attr.dev_attr.store = store_amb_min;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
+			/* Temperature mid sysfs knob */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_mid", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_amb_mid;
+			iattr->s_attr.dev_attr.store = store_amb_mid;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
+			/* Temperature max sysfs knob */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_max", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IWUSR | S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_amb_max;
+			iattr->s_attr.dev_attr.store = store_amb_max;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
+			/* Temperature alarm sysfs knob */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_alarm", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_amb_alarm;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+		}
+	}
+
+	res = device_create_file(&pdev->dev, &dev_attr_name);
+	if (res)
+		goto exit_remove;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		res = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return res;
+
+exit_remove:
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	for (i = 0; i < data->num_attrs; i++)
+		device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr);
+	kfree(data->attrs);
+
+	return res;
+}
+
+static int __devinit i5k_amb_add(void)
+{
+	int res = -ENODEV;
+
+	/* only ever going to be one of these */
+	amb_pdev = platform_device_alloc(DRVNAME, 0);
+	if (!amb_pdev)
+		return -ENOMEM;
+
+	res = platform_device_add(amb_pdev);
+	if (res)
+		goto err;
+	return 0;
+
+err:
+	platform_device_put(amb_pdev);
+	return res;
+}
+
+static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
+{
+	struct pci_dev *pcidev;
+	u32 val32;
+	int res = -ENODEV;
+
+	/* Find AMB register memory space */
+	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_5000_ERR,
+				NULL);
+	if (!pcidev)
+		return -ENODEV;
+
+	if (pci_read_config_dword(pcidev, I5K_REG_AMB_BASE_ADDR, &val32))
+		goto out;
+	data->amb_base = val32;
+
+	if (pci_read_config_dword(pcidev, I5K_REG_AMB_LEN_ADDR, &val32))
+		goto out;
+	data->amb_len = val32;
+
+	/* Is it big enough? */
+	if (data->amb_len < AMB_CONFIG_SIZE * MAX_AMBS) {
+		dev_err(&pcidev->dev, "AMB region too small!\n");
+		goto out;
+	}
+
+	res = 0;
+out:
+	pci_dev_put(pcidev);
+	return res;
+}
+
+static int __devinit i5k_channel_probe(u16 *amb_present, unsigned long dev_id)
+{
+	struct pci_dev *pcidev;
+	u16 val16;
+	int res = -ENODEV;
+
+	/* Copy the DIMM presence map for these two channels */
+	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
+	if (!pcidev)
+		return -ENODEV;
+
+	if (pci_read_config_word(pcidev, I5K_REG_CHAN0_PRESENCE_ADDR, &val16))
+		goto out;
+	amb_present[0] = val16;
+
+	if (pci_read_config_word(pcidev, I5K_REG_CHAN1_PRESENCE_ADDR, &val16))
+		goto out;
+	amb_present[1] = val16;
+
+	res = 0;
+
+out:
+	pci_dev_put(pcidev);
+	return res;
+}
+
+static int __devinit i5k_amb_probe(struct platform_device *pdev)
+{
+	struct i5k_amb_data *data;
+	struct resource *reso;
+	int res = -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Figure out where the AMB registers live */
+	res = i5k_find_amb_registers(data);
+	if (res)
+		goto err;
+
+	/* Copy the DIMM presence map for the first two channels */
+	res = i5k_channel_probe(&data->amb_present[0],
+				PCI_DEVICE_ID_INTEL_5000_FBD0);
+	if (res)
+		goto err;
+
+	/* Copy the DIMM presence map for the optional second two channels */
+	i5k_channel_probe(&data->amb_present[2],
+			  PCI_DEVICE_ID_INTEL_5000_FBD1);
+
+	/* Set up resource regions */
+	reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
+	if (!reso) {
+		res = -EBUSY;
+		goto err;
+	}
+
+	data->amb_mmio = ioremap_nocache(data->amb_base, data->amb_len);
+	if (!data->amb_mmio) {
+		res = -EBUSY;
+		goto err_map_failed;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	res = i5k_amb_hwmon_init(pdev);
+	if (res)
+		goto err_init_failed;
+
+	return res;
+
+err_init_failed:
+	iounmap(data->amb_mmio);
+	platform_set_drvdata(pdev, NULL);
+err_map_failed:
+	release_mem_region(data->amb_base, data->amb_len);
+err:
+	kfree(data);
+	return res;
+}
+
+static int __devexit i5k_amb_remove(struct platform_device *pdev)
+{
+	int i;
+	struct i5k_amb_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	for (i = 0; i < data->num_attrs; i++)
+		device_remove_file(&pdev->dev, &data->attrs[i].s_attr.dev_attr);
+	kfree(data->attrs);
+	iounmap(data->amb_mmio);
+	release_mem_region(data->amb_base, data->amb_len);
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver i5k_amb_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DRVNAME,
+	},
+	.probe = i5k_amb_probe,
+	.remove = __devexit_p(i5k_amb_remove),
+};
+
+static int __init i5k_amb_init(void)
+{
+	int res;
+
+	res = platform_driver_register(&i5k_amb_driver);
+	if (res)
+		return res;
+
+	res = i5k_amb_add();
+	if (res)
+		platform_driver_unregister(&i5k_amb_driver);
+
+	return res;
+}
+
+static void __exit i5k_amb_exit(void)
+{
+	platform_device_unregister(amb_pdev);
+	platform_driver_unregister(&i5k_amb_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("Intel 5000 chipset FB-DIMM AMB temperature sensor");
+MODULE_LICENSE("GPL");
+
+module_init(i5k_amb_init);
+module_exit(i5k_amb_exit);
diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index c462824..9c9cdb0 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -140,10 +140,10 @@
 
 	return 0;
 out1:
-	printk(KERN_ERR "%s: request_settime=%x\n", __FUNCTION__, err);
+	dev_err(data->bmc_device, "request_settime=%x\n", err);
 	return err;
 out:
-	printk(KERN_ERR "%s: validate_addr=%x\n", __FUNCTION__, err);
+	dev_err(data->bmc_device, "validate_addr=%x\n", err);
 	return err;
 }
 
@@ -161,14 +161,14 @@
 	data->sensor_major = data->rx_msg_data[0];
 	data->sensor_minor = data->rx_msg_data[1];
 
-	printk(KERN_INFO DRVNAME ": Found BMC with sensor interface "
-	       "v%d.%d %d-%02d-%02d on interface %d\n",
-	       data->sensor_major,
-	       data->sensor_minor,
-	       extract_value(data->rx_msg_data, 2),
-	       data->rx_msg_data[4],
-	       data->rx_msg_data[5],
-	       data->interface);
+	dev_info(data->bmc_device, "Found BMC with sensor interface "
+		 "v%d.%d %d-%02d-%02d on interface %d\n",
+		 data->sensor_major,
+		 data->sensor_minor,
+		 extract_value(data->rx_msg_data, 2),
+		 data->rx_msg_data[4],
+		 data->rx_msg_data[5],
+		 data->interface);
 
 	return 0;
 }
@@ -212,8 +212,8 @@
 	wait_for_completion(&data->read_complete);
 
 	if (data->rx_result || data->rx_msg_len < 26) {
-		printk(KERN_ERR "Error reading sensor %d, please check.\n",
-		       sensor);
+		dev_err(data->bmc_device, "Error reading sensor %d.\n",
+			sensor);
 		return -ENOENT;
 	}
 
@@ -456,8 +456,7 @@
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
-		printk(KERN_ERR DRVNAME ": Insufficient memory for BMC "
-		       "interface %d.\n", data->interface);
+		dev_err(dev, "Insufficient memory for BMC interface.\n");
 		return;
 	}
 
@@ -471,9 +470,8 @@
 	err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
 			       data, &data->user);
 	if (err < 0) {
-		printk(KERN_ERR DRVNAME ": Error, unable to register user with "
-		       "ipmi interface %d\n",
-		       data->interface);
+		dev_err(dev, "Unable to register user with IPMI "
+			"interface %d\n", data->interface);
 		goto out;
 	}
 
@@ -495,9 +493,9 @@
 	data->hwmon_dev = hwmon_device_register(data->bmc_device);
 
 	if (IS_ERR(data->hwmon_dev)) {
-		printk(KERN_ERR DRVNAME ": Error, unable to register hwmon "
-		       "class device for interface %d\n",
-		       data->interface);
+		dev_err(data->bmc_device, "Unable to register hwmon "
+			"device for IPMI interface %d\n",
+			data->interface);
 		goto out_user;
 	}
 
@@ -508,7 +506,7 @@
 	/* Now go find all the sensors */
 	err = ibmpex_find_sensors(data);
 	if (err) {
-		printk(KERN_ERR "Error %d allocating memory\n", err);
+		dev_err(data->bmc_device, "Error %d finding sensors\n", err);
 		goto out_register;
 	}
 
@@ -561,10 +559,10 @@
 	struct ibmpex_bmc_data *data = (struct ibmpex_bmc_data *)user_msg_data;
 
 	if (msg->msgid != data->tx_msgid) {
-		printk(KERN_ERR "Received msgid (%02x) and transmitted "
-		       "msgid (%02x) mismatch!\n",
-		       (int)msg->msgid,
-		       (int)data->tx_msgid);
+		dev_err(data->bmc_device, "Mismatch between received msgid "
+			"(%02x) and transmitted msgid (%02x)!\n",
+			(int)msg->msgid,
+			(int)data->tx_msgid);
 		ipmi_free_recv_msg(msg);
 		return;
 	}
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index dd36688..d435f00 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -31,14 +31,15 @@
 #include <linux/err.h>
 #include <linux/sysfs.h>
 #include <linux/hwmon.h>
+#include <linux/mutex.h>
 #include <linux/spi/spi.h>
-#include <asm/semaphore.h>
+
 
 #define DRVNAME		"lm70"
 
 struct lm70 {
 	struct device *hwmon_dev;
-	struct semaphore sem;
+	struct mutex lock;
 };
 
 /* sysfs hook function */
@@ -51,7 +52,7 @@
 	s16 raw=0;
 	struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
 
-	if (down_interruptible(&p_lm70->sem))
+	if (mutex_lock_interruptible(&p_lm70->lock))
 		return -ERESTARTSYS;
 
 	/*
@@ -83,7 +84,7 @@
 	val = ((int)raw/32) * 250;
 	status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
 out:
-	up(&p_lm70->sem);
+	mutex_unlock(&p_lm70->lock);
 	return status;
 }
 
@@ -112,7 +113,7 @@
 	if (!p_lm70)
 		return -ENOMEM;
 
-	init_MUTEX(&p_lm70->sem);
+	mutex_init(&p_lm70->lock);
 
 	/* sysfs hook */
 	p_lm70->hwmon_dev = hwmon_device_register(&spi->dev);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 7e2d978..a276806 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -435,6 +435,22 @@
 }
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+			  char *buf)
+{
+	struct sis5595_data *data = sis5595_update_device(dev);
+	int nr = to_sensor_dev_attr(da)->index;
+	return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 15);
+
 static ssize_t show_name(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
@@ -447,22 +463,28 @@
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
 	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_min.dev_attr.attr,
 	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_in2_min.dev_attr.attr,
 	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_min.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 
 	&dev_attr_alarms.attr,
 	&dev_attr_name.attr,
@@ -473,19 +495,28 @@
 	.attrs = sis5595_attributes,
 };
 
-static struct attribute *sis5595_attributes_opt[] = {
+static struct attribute *sis5595_attributes_in4[] = {
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
-
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp1_max.attr,
-	&dev_attr_temp1_max_hyst.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
 	NULL
 };
 
-static const struct attribute_group sis5595_group_opt = {
-	.attrs = sis5595_attributes_opt,
+static const struct attribute_group sis5595_group_in4 = {
+	.attrs = sis5595_attributes_in4,
+};
+
+static struct attribute *sis5595_attributes_temp1[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp1_max.attr,
+	&dev_attr_temp1_max_hyst.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sis5595_group_temp1 = {
+	.attrs = sis5595_attributes_temp1,
 };
  
 /* This is called when the module is loaded */
@@ -540,20 +571,12 @@
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group)))
 		goto exit_free;
 	if (data->maxins == 4) {
-		if ((err = device_create_file(&pdev->dev,
-					&sensor_dev_attr_in4_input.dev_attr))
-		 || (err = device_create_file(&pdev->dev,
-					&sensor_dev_attr_in4_min.dev_attr))
-		 || (err = device_create_file(&pdev->dev,
-					&sensor_dev_attr_in4_max.dev_attr)))
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &sis5595_group_in4)))
 			goto exit_remove_files;
 	} else {
-		if ((err = device_create_file(&pdev->dev,
-					      &dev_attr_temp1_input))
-		 || (err = device_create_file(&pdev->dev,
-					      &dev_attr_temp1_max))
-		 || (err = device_create_file(&pdev->dev,
-					      &dev_attr_temp1_max_hyst)))
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &sis5595_group_temp1)))
 			goto exit_remove_files;
 	}
 
@@ -567,7 +590,8 @@
 
 exit_remove_files:
 	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
-	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
 exit_free:
 	kfree(data);
 exit_release:
@@ -582,7 +606,8 @@
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
-	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_opt);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
+	sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
 
 	release_region(data->addr, SIS5595_EXTENT);
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 20ae425..879d0a6 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -170,20 +170,16 @@
 #define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
 					   (0x550 + (nr) - 7))
 
-#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
-#define W83781D_REG_FAN(nr) (0x27 + (nr))
+/* nr:0-2 for fans:1-3 */
+#define W83627HF_REG_FAN_MIN(nr)	(0x3b + (nr))
+#define W83627HF_REG_FAN(nr)		(0x28 + (nr))
 
-#define W83781D_REG_TEMP2_CONFIG 0x152
-#define W83781D_REG_TEMP3_CONFIG 0x252
-#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
-					((nr == 2) ? (0x0150) : \
-					             (0x27)))
-#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
-					((nr == 2) ? (0x153) : \
-					             (0x3A)))
-#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
-					((nr == 2) ? (0x155) : \
-					             (0x39)))
+#define W83627HF_REG_TEMP2_CONFIG 0x152
+#define W83627HF_REG_TEMP3_CONFIG 0x252
+/* these are zero-based, unlike config constants above */
+static const u16 w83627hf_reg_temp[]		= { 0x27, 0x150, 0x250 };
+static const u16 w83627hf_reg_temp_hyst[]	= { 0x3A, 0x153, 0x253 };
+static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
 
 #define W83781D_REG_BANK 0x4E
 
@@ -360,12 +356,9 @@
 	u8 in_min[9];		/* Register value */
 	u8 fan[3];		/* Register value */
 	u8 fan_min[3];		/* Register value */
-	u8 temp;
-	u8 temp_max;		/* Register value */
-	u8 temp_max_hyst;	/* Register value */
-	u16 temp_add[2];	/* Register value */
-	u16 temp_max_add[2];	/* Register value */
-	u16 temp_max_hyst_add[2]; /* Register value */
+	u16 temp[3];		/* Register value */
+	u16 temp_max[3];	/* Register value */
+	u16 temp_max_hyst[3];	/* Register value */
 	u8 fan_div[3];		/* Register encoding, shifted right */
 	u8 vid;			/* Register encoding, combined */
 	u32 alarms;		/* Register encoding, combined */
@@ -590,7 +583,7 @@
 
 	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
-	w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1),
+	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr),
 			     data->fan_min[nr]);
 
 	mutex_unlock(&data->update_lock);
@@ -611,12 +604,10 @@
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
 	struct w83627hf_data *data = w83627hf_update_device(dev);
-	if (nr >= 2) {	/* TEMP2 and TEMP3 */
-		return sprintf(buf, "%ld\n",
-			(long)LM75_TEMP_FROM_REG(data->temp_add[nr-2]));
-	} else {	/* TEMP1 */
-		return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->temp));
-	}
+
+	u16 tmp = data->temp[nr];
+	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+					  : (long) TEMP_FROM_REG(tmp));
 }
 
 static ssize_t
@@ -625,13 +616,10 @@
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
 	struct w83627hf_data *data = w83627hf_update_device(dev);
-	if (nr >= 2) {	/* TEMP2 and TEMP3 */
-		return sprintf(buf, "%ld\n",
-			(long)LM75_TEMP_FROM_REG(data->temp_max_add[nr-2]));
-	} else {	/* TEMP1 */
-		return sprintf(buf, "%ld\n",
-			(long)TEMP_FROM_REG(data->temp_max));
-	}
+
+	u16 tmp = data->temp_max[nr];
+	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+					  : (long) TEMP_FROM_REG(tmp));
 }
 
 static ssize_t
@@ -640,13 +628,10 @@
 {
 	int nr = to_sensor_dev_attr(devattr)->index;
 	struct w83627hf_data *data = w83627hf_update_device(dev);
-	if (nr >= 2) {	/* TEMP2 and TEMP3 */
-		return sprintf(buf, "%ld\n",
-			(long)LM75_TEMP_FROM_REG(data->temp_max_hyst_add[nr-2]));
-	} else {	/* TEMP1 */
-		return sprintf(buf, "%ld\n",
-			(long)TEMP_FROM_REG(data->temp_max_hyst));
-	}
+
+	u16 tmp = data->temp_max_hyst[nr];
+	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+					  : (long) TEMP_FROM_REG(tmp));
 }
 
 static ssize_t
@@ -656,18 +641,11 @@
 	int nr = to_sensor_dev_attr(devattr)->index;
 	struct w83627hf_data *data = dev_get_drvdata(dev);
 	long val = simple_strtol(buf, NULL, 10);
+	u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
 
 	mutex_lock(&data->update_lock);
-
-	if (nr >= 2) {	/* TEMP2 and TEMP3 */
-		data->temp_max_add[nr-2] = LM75_TEMP_TO_REG(val);
-		w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
-				data->temp_max_add[nr-2]);
-	} else {	/* TEMP1 */
-		data->temp_max = TEMP_TO_REG(val);
-		w83627hf_write_value(data, W83781D_REG_TEMP_OVER(nr),
-			data->temp_max);
-	}
+	data->temp_max[nr] = tmp;
+	w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -679,29 +657,22 @@
 	int nr = to_sensor_dev_attr(devattr)->index;
 	struct w83627hf_data *data = dev_get_drvdata(dev);
 	long val = simple_strtol(buf, NULL, 10);
+	u16 tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
 
 	mutex_lock(&data->update_lock);
-
-	if (nr >= 2) {	/* TEMP2 and TEMP3 */
-		data->temp_max_hyst_add[nr-2] = LM75_TEMP_TO_REG(val);
-		w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
-				data->temp_max_hyst_add[nr-2]);
-	} else {	/* TEMP1 */
-		data->temp_max_hyst = TEMP_TO_REG(val);
-		w83627hf_write_value(data, W83781D_REG_TEMP_HYST(nr),
-			data->temp_max_hyst);
-	}
+	data->temp_max_hyst[nr] = tmp;
+	w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
 
 #define sysfs_temp_decl(offset) \
 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
-			  show_temp, NULL, offset);			\
+			  show_temp, NULL, offset - 1);			\
 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR,	 	\
-			  show_temp_max, store_temp_max, offset);	\
+			  show_temp_max, store_temp_max, offset - 1);	\
 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR,	\
-			  show_temp_max_hyst, store_temp_max_hyst, offset);
+			  show_temp_max_hyst, store_temp_max_hyst, offset - 1);
 
 sysfs_temp_decl(1);
 sysfs_temp_decl(2);
@@ -844,7 +815,7 @@
 
 	/* Restore fan_min */
 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
-	w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]);
 
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -1170,7 +1141,7 @@
 	struct w83627hf_sio_data *sio_data = dev->platform_data;
 	struct w83627hf_data *data;
 	struct resource *res;
-	int err;
+	int err, i;
 
 	static const char *names[] = {
 		"w83627hf",
@@ -1204,9 +1175,9 @@
 	w83627hf_init_device(pdev);
 
 	/* A few vars need to be filled upon startup */
-	data->fan_min[0] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(1));
-	data->fan_min[1] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(2));
-	data->fan_min[2] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(3));
+	for (i = 0; i <= 2; i++)
+		data->fan_min[i] = w83627hf_read_value(
+					data, W83627HF_REG_FAN_MIN(i));
 	w83627hf_update_fan_div(data);
 
 	/* Register common device attributes */
@@ -1514,23 +1485,23 @@
 
 	if(init) {
 		/* Enable temp2 */
-		tmp = w83627hf_read_value(data, W83781D_REG_TEMP2_CONFIG);
+		tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG);
 		if (tmp & 0x01) {
 			dev_warn(&pdev->dev, "Enabling temp2, readings "
 				 "might not make sense\n");
-			w83627hf_write_value(data, W83781D_REG_TEMP2_CONFIG,
+			w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG,
 				tmp & 0xfe);
 		}
 
 		/* Enable temp3 */
 		if (type != w83697hf) {
 			tmp = w83627hf_read_value(data,
-				W83781D_REG_TEMP3_CONFIG);
+				W83627HF_REG_TEMP3_CONFIG);
 			if (tmp & 0x01) {
 				dev_warn(&pdev->dev, "Enabling temp3, "
 					 "readings might not make sense\n");
 				w83627hf_write_value(data,
-					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+					W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe);
 			}
 		}
 	}
@@ -1563,7 +1534,7 @@
 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 {
 	struct w83627hf_data *data = dev_get_drvdata(dev);
-	int i;
+	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
 
 	mutex_lock(&data->update_lock);
 
@@ -1584,12 +1555,12 @@
 			    w83627hf_read_value(data,
 					       W83781D_REG_IN_MAX(i));
 		}
-		for (i = 1; i <= 3; i++) {
-			data->fan[i - 1] =
-			    w83627hf_read_value(data, W83781D_REG_FAN(i));
-			data->fan_min[i - 1] =
+		for (i = 0; i <= 2; i++) {
+			data->fan[i] =
+			    w83627hf_read_value(data, W83627HF_REG_FAN(i));
+			data->fan_min[i] =
 			    w83627hf_read_value(data,
-					       W83781D_REG_FAN_MIN(i));
+					       W83627HF_REG_FAN_MIN(i));
 		}
 		for (i = 0; i <= 2; i++) {
 			u8 tmp = w83627hf_read_value(data,
@@ -1616,25 +1587,13 @@
 					break;
 			}
 		}
-
-		data->temp = w83627hf_read_value(data, W83781D_REG_TEMP(1));
-		data->temp_max =
-		    w83627hf_read_value(data, W83781D_REG_TEMP_OVER(1));
-		data->temp_max_hyst =
-		    w83627hf_read_value(data, W83781D_REG_TEMP_HYST(1));
-		data->temp_add[0] =
-		    w83627hf_read_value(data, W83781D_REG_TEMP(2));
-		data->temp_max_add[0] =
-		    w83627hf_read_value(data, W83781D_REG_TEMP_OVER(2));
-		data->temp_max_hyst_add[0] =
-		    w83627hf_read_value(data, W83781D_REG_TEMP_HYST(2));
-		if (data->type != w83697hf) {
-			data->temp_add[1] =
-			  w83627hf_read_value(data, W83781D_REG_TEMP(3));
-			data->temp_max_add[1] =
-			  w83627hf_read_value(data, W83781D_REG_TEMP_OVER(3));
-			data->temp_max_hyst_add[1] =
-			  w83627hf_read_value(data, W83781D_REG_TEMP_HYST(3));
+		for (i = 0; i < num_temps; i++) {
+			data->temp[i] = w83627hf_read_value(
+						data, w83627hf_reg_temp[i]);
+			data->temp_max[i] = w83627hf_read_value(
+						data, w83627hf_reg_temp_over[i]);
+			data->temp_max_hyst[i] = w83627hf_read_value(
+						data, w83627hf_reg_temp_hyst[i]);
 		}
 
 		w83627hf_update_fan_div(data);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index a6a1edf..e0fa752 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1122,12 +1122,13 @@
 				&sensor_dev_attr_temp3_beep.dev_attr)))
 			return err;
 
-		if (kind != w83781d)
+		if (kind != w83781d) {
 			err = sysfs_chmod_file(&dev->kobj,
 				&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 				S_IRUGO | S_IWUSR);
 			if (err)
 				return err;
+		}
 	}
 
 	if (kind != w83781d && kind != as99127f) {
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 58e3271..ca18e0b 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -51,6 +51,7 @@
 #define MRXFIFO_DATA_M	0x000000ff
 
 #define SMSTA_XEN	0x08000000
+#define SMSTA_MTN	0x00200000
 
 #define CTL_MRR		0x00000400
 #define CTL_MTR		0x00000200
@@ -98,6 +99,10 @@
 		status = reg_read(smbus, REG_SMSTA);
 	}
 
+	/* Got NACK? */
+	if (status & SMSTA_MTN)
+		return -ENXIO;
+
 	if (timeout < 0) {
 		dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status);
 		reg_write(smbus, REG_SMSTA, status);
@@ -364,7 +369,7 @@
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 
-	/* set up the driverfs linkage to our parent device */
+	/* set up the sysfs linkage to our parent device */
 	smbus->adapter.dev.parent = &dev->dev;
 
 	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index d3da1fb..1a7eeeb 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -128,13 +128,20 @@
 	for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
 		eeprom_update_client(client, slice);
 
-	/* Hide Vaio security settings to regular users (16 first bytes) */
-	if (data->nature == VAIO && off < 16 && !capable(CAP_SYS_ADMIN)) {
-		size_t in_row1 = 16 - off;
-		in_row1 = min(in_row1, count);
-		memset(buf, 0, in_row1);
-		if (count - in_row1 > 0)
-			memcpy(buf + in_row1, &data->data[16], count - in_row1);
+	/* Hide Vaio private settings to regular users:
+	   - BIOS passwords: bytes 0x00 to 0x0f
+	   - UUID: bytes 0x10 to 0x1f
+	   - Serial number: 0xc0 to 0xdf */
+	if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
+		int i;
+
+		for (i = 0; i < count; i++) {
+			if ((off + i <= 0x1f) ||
+			    (off + i >= 0xc0 && off + i <= 0xdf))
+				buf[i] = 0;
+			else
+				buf[i] = data->data[off + i];
+		}
 	} else {
 		memcpy(buf, &data->data[off], count);
 	}
@@ -197,14 +204,18 @@
 		goto exit_kfree;
 
 	/* Detect the Vaio nature of EEPROMs.
-	   We use the "PCG-" prefix as the signature. */
+	   We use the "PCG-" or "VGN-" prefix as the signature. */
 	if (address == 0x57) {
-		if (i2c_smbus_read_byte_data(new_client, 0x80) == 'P'
-		 && i2c_smbus_read_byte(new_client) == 'C'
-		 && i2c_smbus_read_byte(new_client) == 'G'
-		 && i2c_smbus_read_byte(new_client) == '-') {
+		char name[4];
+
+		name[0] = i2c_smbus_read_byte_data(new_client, 0x80);
+		name[1] = i2c_smbus_read_byte(new_client);
+		name[2] = i2c_smbus_read_byte(new_client);
+		name[3] = i2c_smbus_read_byte(new_client);
+
+		if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
 			dev_info(&new_client->dev, "Vaio EEPROM detected, "
-				"enabling password protection\n");
+				 "enabling privacy protection\n");
 			data->nature = VAIO;
 		}
 	}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 1a4e8dc..b5e13e4 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -673,7 +673,7 @@
 	return 0;
 }
 
-int i2c_check_addr(struct i2c_adapter *adapter, int addr)
+static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
 {
 	int rval;
 
@@ -683,7 +683,6 @@
 
 	return rval;
 }
-EXPORT_SYMBOL(i2c_check_addr);
 
 int i2c_attach_client(struct i2c_client *client)
 {
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 5a15e50..c21ae20 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -38,6 +38,15 @@
 
 static struct i2c_driver i2cdev_driver;
 
+/*
+ * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a
+ * slave (i2c_client) with which messages will be exchanged.  It's coupled
+ * with a character special file which is accessed by user mode drivers.
+ *
+ * The list of i2c_dev structures is parallel to the i2c_adapter lists
+ * maintained by the driver model, and is updated using notifications
+ * delivered to the i2cdev_driver.
+ */
 struct i2c_dev {
 	struct list_head list;
 	struct i2c_adapter *adap;
@@ -103,6 +112,25 @@
 }
 static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
 
+/* ------------------------------------------------------------------------- */
+
+/*
+ * After opening an instance of this character special file, a file
+ * descriptor starts out associated only with an i2c_adapter (and bus).
+ *
+ * Using the I2C_RDWR ioctl(), you can then *immediately* issue i2c_msg
+ * traffic to any devices on the bus used by that adapter.  That's because
+ * the i2c_msg vectors embed all the addressing information they need, and
+ * are submitted directly to an i2c_adapter.  However, SMBus-only adapters
+ * don't support that interface.
+ *
+ * To use read()/write() system calls on that file descriptor, or to use
+ * SMBus interfaces (and work with SMBus-only hosts!), you must first issue
+ * an I2C_SLAVE (or I2C_SLAVE_FORCE) ioctl.  That configures an anonymous
+ * (never registered) i2c_client so it holds the addressing information
+ * needed by those system calls and by this SMBus interface.
+ */
+
 static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
                             loff_t *offset)
 {
@@ -154,6 +182,29 @@
 	return ret;
 }
 
+/* This address checking function differs from the one in i2c-core
+   in that it considers an address with a registered device, but no
+   bounded driver, as NOT busy. */
+static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
+{
+	struct list_head *item;
+	struct i2c_client *client;
+	int res = 0;
+
+	mutex_lock(&adapter->clist_lock);
+	list_for_each(item, &adapter->clients) {
+		client = list_entry(item, struct i2c_client, list);
+		if (client->addr == addr) {
+			if (client->driver)
+				res = -EBUSY;
+			break;
+		}
+	}
+	mutex_unlock(&adapter->clist_lock);
+
+	return res;
+}
+
 static int i2cdev_ioctl(struct inode *inode, struct file *file,
 		unsigned int cmd, unsigned long arg)
 {
@@ -172,11 +223,22 @@
 	switch ( cmd ) {
 	case I2C_SLAVE:
 	case I2C_SLAVE_FORCE:
+		/* NOTE:  devices set up to work with "new style" drivers
+		 * can't use I2C_SLAVE, even when the device node is not
+		 * bound to a driver.  Only I2C_SLAVE_FORCE will work.
+		 *
+		 * Setting the PEC flag here won't affect kernel drivers,
+		 * which will be using the i2c_client node registered with
+		 * the driver model core.  Likewise, when that client has
+		 * the PEC flag already set, the i2c-dev driver won't see
+		 * (or use) this setting.
+		 */
 		if ((arg > 0x3ff) ||
 		    (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
 			return -EINVAL;
-		if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
+		if (cmd == I2C_SLAVE && i2cdev_check_addr(client->adapter, arg))
 			return -EBUSY;
+		/* REVISIT: address could become busy later */
 		client->addr = arg;
 		return 0;
 	case I2C_TENBIT:
@@ -386,6 +448,13 @@
 	if (!adap)
 		return -ENODEV;
 
+	/* This creates an anonymous i2c_client, which may later be
+	 * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.
+	 *
+	 * This client is ** NEVER REGISTERED ** with the driver model
+	 * or I2C core code!!  It just holds private copies of addressing
+	 * information and maybe a PEC flag.
+	 */
 	client = kzalloc(sizeof(*client), GFP_KERNEL);
 	if (!client) {
 		i2c_put_adapter(adap);
@@ -394,7 +463,6 @@
 	snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
 	client->driver = &i2cdev_driver;
 
-	/* registered with adapter, passed as client to user */
 	client->adapter = adap;
 	file->private_data = client;
 
@@ -422,6 +490,14 @@
 	.release	= i2cdev_release,
 };
 
+/* ------------------------------------------------------------------------- */
+
+/*
+ * The legacy "i2cdev_driver" is used primarily to get notifications when
+ * I2C adapters are added or removed, so that each one gets an i2c_dev
+ * and is thus made available to userspace driver code.
+ */
+
 static struct class *i2c_dev_class;
 
 static int i2cdev_attach_adapter(struct i2c_adapter *adap)
@@ -486,6 +562,12 @@
 	.detach_client	= i2cdev_detach_client,
 };
 
+/* ------------------------------------------------------------------------- */
+
+/*
+ * module load/unload record keeping
+ */
+
 static int __init i2c_dev_init(void)
 {
 	int res;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6eaece9..e445fe6 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -152,9 +152,22 @@
 	  If unsure, say Y.
 
 config IDEDISK_MULTI_MODE
-	bool "Use multi-mode by default"
+	bool "Use multiple sector mode for Programmed Input/Output by default"
 	help
-	  If you get this error, try to say Y here:
+	  This setting is irrelevant for most IDE disks, with direct memory
+	  access, to which multiple sector mode does not apply. Multiple sector
+	  mode is a feature of most modern IDE hard drives, permitting the
+	  transfer of multiple sectors per Programmed Input/Output interrupt,
+	  rather than the usual one sector per interrupt. When this feature is
+	  enabled, it can reduce operating system overhead for disk Programmed
+	  Input/Output. On some systems, it also can increase the data
+	  throughput of Programmed Input/Output. Some drives, however, seemed
+	  to run slower with multiple sector mode enabled. Some drives claimed
+	  to support multiple sector mode, but lost data at some settings.
+	  Under rare circumstances, such failures could result in massive
+	  filesystem corruption.
+
+	  If you get the following error, try to say Y here:
 
 	  hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
 	  hda: set_multmode: error=0x04 { DriveStatusError }
@@ -190,10 +203,6 @@
 	  CD-ROM drive, you can say N to all other CD-ROM options, but be sure
 	  to say Y or M to "ISO 9660 CD-ROM file system support".
 
-	  Note that older versions of LILO (LInux LOader) cannot properly deal
-	  with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
-	  <http://lilo.go.dyndns.org/>.
-
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-cd.
 
@@ -380,9 +389,10 @@
 config IDEPCI_PCIBUS_ORDER
 	def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
 
+# TODO: split it on per host driver config options (or module parameters)
 config BLK_DEV_OFFBOARD
 	bool "Boot off-board chipsets first support"
-	depends on BLK_DEV_IDEPCI
+	depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
 	help
 	  Normally, IDE controllers built into the motherboard (on-board
 	  controllers) are assigned to ide0 and ide1 while those on add-in PCI
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e196aef..7f5bc2e 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -748,8 +748,7 @@
 			hold = ATA_DMA2_HOLD;
 			break;
 		default:
-			BUG();
-			break;
+			return;
 	}
 
 	if (speed >= XFER_UDMA_0)
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 428f7a8..e3add70 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -340,7 +340,7 @@
 
 	if (drive->media != ide_disk) {
 		if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
-			return -1;
+			return 0;
 	}
 
 	/*
@@ -752,7 +752,8 @@
 			mode = XFER_MW_DMA_1;
 	}
 
-	printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
+	printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+			  mode ? ide_xfer_verbose(mode) : "no DMA");
 
 	return min(mode, req_mode);
 }
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c89f0d3..db22d1f 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -340,6 +340,8 @@
 		if (args) {
 			args[0] = stat;
 			args[1] = err;
+			/* be sure we're looking at the low order bits */
+			hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
 			args[2] = hwif->INB(IDE_NSECTOR_REG);
 			args[3] = hwif->INB(IDE_SECTOR_REG);
 			args[4] = hwif->INB(IDE_LCYL_REG);
@@ -654,7 +656,8 @@
 	int retries = 10;
 
 	local_irq_enable_in_hardirq();
-	if ((stat & DRQ_STAT) && args && args[3]) {
+	if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
+	    (stat & DRQ_STAT) && args && args[3]) {
 		u8 io_32bit = drive->io_32bit;
 		drive->io_32bit = 0;
 		hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
@@ -882,7 +885,6 @@
 		return do_rw_taskfile(drive, args);
 	} else if (rq->cmd_type == REQ_TYPE_ATA_TASK) {
 		u8 *args = rq->buffer;
-		u8 sel;
  
 		if (!args)
 			goto done;
@@ -900,10 +902,7 @@
  		hwif->OUTB(args[3], IDE_SECTOR_REG);
  		hwif->OUTB(args[4], IDE_LCYL_REG);
  		hwif->OUTB(args[5], IDE_HCYL_REG);
- 		sel = (args[6] & ~0x10);
- 		if (drive->select.b.unit)
- 			sel |= 0x10;
- 		hwif->OUTB(sel, IDE_SELECT_REG);
+ 		hwif->OUTB((args[6] & 0xEF)|drive->select.all, IDE_SELECT_REG);
  		ide_cmd(drive, args[0], args[2], &drive_cmd_intr);
  		return ide_started;
  	} else if (rq->cmd_type == REQ_TYPE_ATA_CMD) {
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index dcda0f1..e17a9ee 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -403,8 +403,12 @@
 #endif
 }
 
-/* FIXME: exported for use by the USB storage (isd200.c) code only */
-EXPORT_SYMBOL(ide_fix_driveid);
+/*
+ * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
+ * removing leading/trailing blanks and compressing internal blanks.
+ * It is primarily used to tidy up the model name/number fields as
+ * returned by the WIN_[P]IDENTIFY commands.
+ */
 
 void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
 {
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index af86433..1609b86 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -514,6 +514,7 @@
 			if (drive->addressing == 1) {
 				__u64 sectors = 0;
 				u32 low = 0, high = 0;
+				hwif->OUTB(drive->ctl&~0x80, IDE_CONTROL_REG);
 				low = ide_read_24(drive);
 				hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG);
 				high = ide_read_24(drive);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 6a6f2e0..56fb0b8 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -172,11 +172,12 @@
 	ide_fixstring(id->fw_rev,    sizeof(id->fw_rev),    bswap);
 	ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
 
+	/* we depend on this a lot! */
+	id->model[sizeof(id->model)-1] = '\0';
+
 	if (strstr(id->model, "E X A B Y T E N E S T"))
 		goto err_misc;
 
-	/* we depend on this a lot! */
-	id->model[sizeof(id->model)-1] = '\0';
 	printk("%s: %s, ", drive->name, id->model);
 	drive->present = 1;
 	drive->dead = 0;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index d066546..2b60f1b0 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -471,6 +471,7 @@
 	struct request rq;
 
 	memset(&rq, 0, sizeof(rq));
+	rq.ref_count = 1;
 	rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
 	rq.buffer = buf;
 
@@ -511,6 +512,7 @@
 
 EXPORT_SYMBOL(ide_raw_taskfile);
 
+#ifdef CONFIG_IDE_TASK_IOCTL
 int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 {
 	ide_task_request_t	*req_task;
@@ -660,6 +662,7 @@
 
 	return err;
 }
+#endif
 
 int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
 {
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index ea0143e..51fca44 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/cmd64x.c		Version 1.50	May 10, 2007
+ * linux/drivers/ide/pci/cmd64x.c		Version 1.51	Nov 8, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Due to massive hardware bugs, UltraDMA is only supported
@@ -339,7 +339,8 @@
 	u8  mrdmode		= inb(hwif->dma_master + 0x01);
 
 	/* clear the interrupt bit */
-	outb(mrdmode | irq_mask, hwif->dma_master + 0x01);
+	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
+	     hwif->dma_master + 0x01);
 
 	return err;
 }
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 5994089..5476903 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -117,8 +117,7 @@
 		case XFER_MW_DMA_1:	timings = 0x00012121; break;
 		case XFER_MW_DMA_2:	timings = 0x00002020; break;
 		default:
-			BUG();
-			break;
+			return;
 	}
 	basereg = CS5530_BASEREG(drive->hwif);
 	reg = inl(basereg + 4);			/* get drive0 config register */
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 5c99754..99b7d76 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -653,8 +653,7 @@
 
 static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
-	return 0;
+	return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
 }
 
 static const struct pci_device_id it821x_pci_tbl[] = {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index bdf64d9..0083eaf 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -139,8 +139,7 @@
 
 static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_setup_pci_device(dev, &jmicron_chipset);
-	return 0;
+	return ide_setup_pci_device(dev, &jmicron_chipset);
 }
 
 /* All JMB PATA controllers have and will continue to have the same
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 9329d4a..63625a0 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -302,6 +302,7 @@
 
 static const struct ich_laptop ich_laptop[] = {
 	/* devid, subvendor, subdev */
+	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 0a7b320..707d5ff 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -186,8 +186,7 @@
 			}
 			break;
 		default:
-			BUG();
-			break;
+			return;
 	}
 
 	if (unit == 0) {			/* are we configuring drive0? */
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 6b7bb53..f6e2ab3 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -356,7 +356,6 @@
 			sis_program_timings(drive, speed);
 			break;
 		default:
-			BUG();
 			break;
 	}
 }
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 816b531..5afdfef 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1138,6 +1138,7 @@
 	hwif->drives[0].autotune = IDE_TUNE_AUTO;
 	hwif->drives[1].autotune = IDE_TUNE_AUTO;
 	hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+			   IDE_HFLAG_PIO_NO_DOWNGRADE |
 			   IDE_HFLAG_POST_SET_MODE;
 	hwif->pio_mask = ATA_PIO4;
 	hwif->set_pio_mode = pmac_ide_set_pio_mode;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 02d14bf..25fd090 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -7,11 +7,6 @@
  *  May be copied or modified under the terms of the GNU General Public License
  */
 
-/*
- *  This module provides support for automatic detection and
- *  configuration of all PCI IDE interfaces present in a system.  
- */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index f0c7775..b5436ca 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1000,6 +1000,7 @@
 	props->max_sge = dev->attr.max_sge_per_wr;
 	props->max_sge_rd = 1;
 	props->max_qp_rd_atom = dev->attr.max_rdma_reads_per_qp;
+	props->max_qp_init_rd_atom = dev->attr.max_rdma_reads_per_qp;
 	props->max_cq = dev->attr.max_cqs;
 	props->max_cqe = dev->attr.max_cqes_per_cq;
 	props->max_mr = dev->attr.max_mem_regs;
diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c
index 97d1086..453eb99 100644
--- a/drivers/infiniband/hw/ehca/ehca_av.c
+++ b/drivers/infiniband/hw/ehca/ehca_av.c
@@ -50,6 +50,38 @@
 
 static struct kmem_cache *av_cache;
 
+int ehca_calc_ipd(struct ehca_shca *shca, int port,
+		  enum ib_rate path_rate, u32 *ipd)
+{
+	int path = ib_rate_to_mult(path_rate);
+	int link, ret;
+	struct ib_port_attr pa;
+
+	if (path_rate == IB_RATE_PORT_CURRENT) {
+		*ipd = 0;
+		return 0;
+	}
+
+	if (unlikely(path < 0)) {
+		ehca_err(&shca->ib_device, "Invalid static rate! path_rate=%x",
+			 path_rate);
+		return -EINVAL;
+	}
+
+	ret = ehca_query_port(&shca->ib_device, port, &pa);
+	if (unlikely(ret < 0)) {
+		ehca_err(&shca->ib_device, "Failed to query port  ret=%i", ret);
+		return ret;
+	}
+
+	link = ib_width_enum_to_int(pa.active_width) * pa.active_speed;
+
+	/* IPD = round((link / path) - 1) */
+	*ipd = ((link + (path >> 1)) / path) - 1;
+
+	return 0;
+}
+
 struct ib_ah *ehca_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
 {
 	int ret;
@@ -69,15 +101,13 @@
 	av->av.slid_path_bits = ah_attr->src_path_bits;
 
 	if (ehca_static_rate < 0) {
-		int ah_mult = ib_rate_to_mult(ah_attr->static_rate);
-		int ehca_mult =
-			ib_rate_to_mult(shca->sport[ah_attr->port_num].rate );
-
-		if (ah_mult >= ehca_mult)
-			av->av.ipd = 0;
-		else
-			av->av.ipd = (ah_mult > 0) ?
-				((ehca_mult - 1) / ah_mult) : 0;
+		u32 ipd;
+		if (ehca_calc_ipd(shca, ah_attr->port_num,
+				  ah_attr->static_rate, &ipd)) {
+			ret = -EINVAL;
+			goto create_ah_exit1;
+		}
+		av->av.ipd = ipd;
 	} else
 		av->av.ipd = ehca_static_rate;
 
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 2d660ae..87f12d4 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -95,7 +95,6 @@
 struct ehca_sport {
 	struct ib_cq *ibcq_aqp1;
 	struct ib_qp *ibqp_aqp1;
-	enum ib_rate  rate;
 	enum ib_port_state port_state;
 	struct ehca_sma_attr saved_attr;
 };
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 15806d1..5bd7b59 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -151,7 +151,6 @@
 	}
 
 	memset(props, 0, sizeof(struct ib_port_attr));
-	props->state = rblock->state;
 
 	switch (rblock->max_mtu) {
 	case 0x1:
@@ -188,11 +187,20 @@
 	props->subnet_timeout  = rblock->subnet_timeout;
 	props->init_type_reply = rblock->init_type_reply;
 
-	props->active_width    = IB_WIDTH_12X;
-	props->active_speed    = 0x1;
-
-	/* at the moment (logical) link state is always LINK_UP */
-	props->phys_state      = 0x5;
+	if (rblock->state && rblock->phys_width) {
+		props->phys_state      = rblock->phys_pstate;
+		props->state           = rblock->phys_state;
+		props->active_width    = rblock->phys_width;
+		props->active_speed    = rblock->phys_speed;
+	} else {
+		/* old firmware releases don't report physical
+		 * port info, so use default values
+		 */
+		props->phys_state      = 5;
+		props->state           = rblock->state;
+		props->active_width    = IB_WIDTH_12X;
+		props->active_speed    = 0x1;
+	}
 
 query_port1:
 	ehca_free_fw_ctrlblock(rblock);
diff --git a/drivers/infiniband/hw/ehca/ehca_iverbs.h b/drivers/infiniband/hw/ehca/ehca_iverbs.h
index dce503b..5485799 100644
--- a/drivers/infiniband/hw/ehca/ehca_iverbs.h
+++ b/drivers/infiniband/hw/ehca/ehca_iverbs.h
@@ -189,6 +189,9 @@
 
 void ehca_poll_eqs(unsigned long data);
 
+int ehca_calc_ipd(struct ehca_shca *shca, int port,
+		  enum ib_rate path_rate, u32 *ipd);
+
 #ifdef CONFIG_PPC_64K_PAGES
 void *ehca_alloc_fw_ctrlblock(gfp_t flags);
 void ehca_free_fw_ctrlblock(void *ptr);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index c6cd38c..90d4334 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -327,9 +327,6 @@
 		shca->hw_level = ehca_hw_level;
 	ehca_gen_dbg(" ... hardware level=%x", shca->hw_level);
 
-	shca->sport[0].rate = IB_RATE_30_GBPS;
-	shca->sport[1].rate = IB_RATE_30_GBPS;
-
 	shca->hca_cap = rblock->hca_cap_indicators;
 	ehca_gen_dbg(" ... HCA capabilities:");
 	for (i = 0; i < ARRAY_SIZE(hca_cap_descr); i++)
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index de18264..2e3e654 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -1196,10 +1196,6 @@
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_QKEY, 1);
 	}
 	if (attr_mask & IB_QP_AV) {
-		int ah_mult = ib_rate_to_mult(attr->ah_attr.static_rate);
-		int ehca_mult = ib_rate_to_mult(shca->sport[my_qp->
-						init_attr.port_num].rate);
-
 		mqpcb->dlid = attr->ah_attr.dlid;
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DLID, 1);
 		mqpcb->source_path_bits = attr->ah_attr.src_path_bits;
@@ -1207,11 +1203,12 @@
 		mqpcb->service_level = attr->ah_attr.sl;
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1);
 
-		if (ah_mult < ehca_mult)
-			mqpcb->max_static_rate = (ah_mult > 0) ?
-			((ehca_mult - 1) / ah_mult) : 0;
-		else
-			mqpcb->max_static_rate = 0;
+		if (ehca_calc_ipd(shca, my_qp->init_attr.port_num,
+				  attr->ah_attr.static_rate,
+				  &mqpcb->max_static_rate)) {
+			ret = -EINVAL;
+			goto modify_qp_exit2;
+		}
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_MAX_STATIC_RATE, 1);
 
 		/*
@@ -1280,10 +1277,6 @@
 			(MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP, 1);
 	}
 	if (attr_mask & IB_QP_ALT_PATH) {
-		int ah_mult = ib_rate_to_mult(attr->alt_ah_attr.static_rate);
-		int ehca_mult = ib_rate_to_mult(
-			shca->sport[my_qp->init_attr.port_num].rate);
-
 		if (attr->alt_port_num < 1
 		    || attr->alt_port_num > shca->num_ports) {
 			ret = -EINVAL;
@@ -1309,10 +1302,12 @@
 		mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits;
 		mqpcb->service_level_al = attr->alt_ah_attr.sl;
 
-		if (ah_mult > 0 && ah_mult < ehca_mult)
-			mqpcb->max_static_rate_al = (ehca_mult - 1) / ah_mult;
-		else
-			mqpcb->max_static_rate_al = 0;
+		if (ehca_calc_ipd(shca, my_qp->init_attr.port_num,
+				  attr->alt_ah_attr.static_rate,
+				  &mqpcb->max_static_rate_al)) {
+			ret = -EINVAL;
+			goto modify_qp_exit2;
+		}
 
 		/* OpenIB doesn't support alternate retry counts - copy them */
 		mqpcb->retry_count_al = mqpcb->retry_count;
diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h
index d9739e5..485b840 100644
--- a/drivers/infiniband/hw/ehca/hipz_hw.h
+++ b/drivers/infiniband/hw/ehca/hipz_hw.h
@@ -402,7 +402,11 @@
 	u64 max_msg_sz;
 	u32 max_mtu;
 	u32 vl_cap;
-	u8  reserved2[1900];
+	u32 phys_pstate;
+	u32 phys_state;
+	u32 phys_speed;
+	u32 phys_width;
+	u8  reserved2[1884];
 	u64 guid_entries[255];
 } __attribute__ ((packed));
 
diff --git a/drivers/infiniband/hw/ipath/ipath_cq.c b/drivers/infiniband/hw/ipath/ipath_cq.c
index 645ed71..08d8ae1 100644
--- a/drivers/infiniband/hw/ipath/ipath_cq.c
+++ b/drivers/infiniband/hw/ipath/ipath_cq.c
@@ -404,7 +404,7 @@
 
 		ret = ib_copy_to_udata(udata, &offset, sizeof(offset));
 		if (ret)
-			goto bail;
+			goto bail_free;
 	}
 
 	spin_lock_irq(&cq->lock);
@@ -424,10 +424,8 @@
 	else
 		n = head - tail;
 	if (unlikely((u32)cqe < n)) {
-		spin_unlock_irq(&cq->lock);
-		vfree(wc);
 		ret = -EOVERFLOW;
-		goto bail;
+		goto bail_unlock;
 	}
 	for (n = 0; tail != head; n++) {
 		if (cq->ip)
@@ -459,7 +457,12 @@
 	}
 
 	ret = 0;
+	goto bail;
 
+bail_unlock:
+	spin_unlock_irq(&cq->lock);
+bail_free:
+	vfree(wc);
 bail:
 	return ret;
 }
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index 5c29b2b..120a61b 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -959,8 +959,9 @@
 		/* If this is a partial ACK, reset the retransmit timer. */
 		if (qp->s_last != qp->s_tail) {
 			spin_lock(&dev->pending_lock);
-			list_add_tail(&qp->timerwait,
-				      &dev->pending[dev->pending_index]);
+			if (list_empty(&qp->timerwait))
+				list_add_tail(&qp->timerwait,
+					&dev->pending[dev->pending_index]);
 			spin_unlock(&dev->pending_lock);
 			/*
 			 * If we get a partial ACK for a resent operation,
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index a3b945a..7832d8b 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@
 
 config HISAX_TELESPCI
 	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Teles PCI.
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -248,7 +248,7 @@
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
@@ -287,7 +287,7 @@
 
 config HISAX_BKM_A4T
 	bool "Telekom A4T card"
-	depends on PCI
+	depends on PCI && PCI_LEGACY
 	help
 	  This enables HiSax support for the Telekom A4T card.
 
@@ -297,7 +297,7 @@
 
 config HISAX_SCT_QUADRO
 	bool "Scitel Quadro card"
-	depends on PCI
+	depends on PCI && PCI_LEGACY
 	help
 	  This enables HiSax support for the Scitel Quadro card.
 
@@ -316,7 +316,7 @@
 
 config HISAX_HFC_PCI
 	bool "HFC PCI-Bus cards"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
@@ -325,7 +325,7 @@
 
 config HISAX_W6692
 	bool "Winbond W6692 based cards"
-	depends on PCI
+	depends on PCI && PCI_LEGACY
 	help
 	  This enables HiSax support for Winbond W6692 based PCI ISDN cards.
 
@@ -341,7 +341,7 @@
 
 config HISAX_ENTERNOW_PCI
 	bool "Formula-n enter:now PCI card"
-	depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
@@ -411,7 +411,7 @@
 
 config HISAX_FRITZ_PCIPNP
 	tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	depends on PCI && PCI_LEGACY && EXPERIMENTAL
 	help
 	  This enables the driver for the AVM Fritz!Card PCI,
 	  Fritz!Card PCI v2 and Fritz!Card PnP.
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index f8b7978..035d158 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -830,7 +830,7 @@
 
 #endif /* __ISAPNP__ */
 
-#ifndef CONFIG_PCI
+#ifndef CONFIG_PCI_LEGACY
 
 static int __devinit avm_pci_setup(struct IsdnCardState *cs)
 {
@@ -872,7 +872,7 @@
 	return (1);
 }
 
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI_LEGACY */
 
 int __devinit
 setup_avm_pcipnp(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 8267450..2d67085 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -1148,7 +1148,7 @@
 
 #endif	/* ISAPNP */
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCI_LEGACY
 static struct pci_dev *dev_diva __devinitdata = NULL;
 static struct pci_dev *dev_diva_u __devinitdata = NULL;
 static struct pci_dev *dev_diva201 __devinitdata = NULL;
@@ -1229,14 +1229,14 @@
 	return (1);		/* card found */
 }
 
-#else	/* if !CONFIG_PCI */
+#else	/* if !CONFIG_PCI_LEGACY */
 
 static int __devinit setup_diva_pci(struct IsdnCard *card)
 {
 	return (-1);	/* card not found; continue search */
 }
 
-#endif	/* CONFIG_PCI */
+#endif	/* CONFIG_PCI_LEGACY */
 
 int __devinit
 setup_diva(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c
index 948a9b2..d272d8c 100644
--- a/drivers/isdn/hisax/elsa.c
+++ b/drivers/isdn/hisax/elsa.c
@@ -883,7 +883,7 @@
 	val += 'A' - 3;
 	if (val == 'B' || val == 'C')
 		val ^= 1;
-	if ((cs->subtyp == ELSA_PCFPRO) && (val = 'G'))
+	if ((cs->subtyp == ELSA_PCFPRO) && (val == 'G'))
 		val = 'C';
 	printk(KERN_INFO
 	       "Elsa: %s found at %#lx Rev.:%c IRQ %d\n",
@@ -1025,7 +1025,7 @@
 	       cs->irq);
 }
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCI_LEGACY
 static 	struct pci_dev *dev_qs1000 __devinitdata = NULL;
 static 	struct pci_dev *dev_qs3000 __devinitdata = NULL;
 
@@ -1093,7 +1093,7 @@
 {
 	return (1);
 }
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI_LEGACY */
 
 static int __devinit
 setup_elsa_common(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index 3efa719..f66620a 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -532,6 +532,7 @@
 	return (0);
 }
 
+#ifdef CONFIG_PCI_LEGACY
 static struct pci_dev *dev_tel __devinitdata = NULL;
 
 static int __devinit
@@ -620,6 +621,7 @@
 
 	return (0);
 }
+#endif /* CONFIG_PCI_LEGACY */
 
 int __devinit
 setup_gazel(struct IsdnCard *card)
@@ -639,7 +641,7 @@
 			return (0);
 	} else {
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCI_LEGACY
 		if (setup_gazelpci(cs))
 			return (0);
 #else
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index e5918c6..bd99211 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -223,7 +223,6 @@
 	return 0;
 }
 
-static struct pci_dev *niccy_dev __devinitdata = NULL;
 #ifdef __ISAPNP__
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
@@ -299,7 +298,9 @@
 			return 0;
 		}
 	} else {
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCI_LEGACY
+		static struct pci_dev *niccy_dev __devinitdata;
+
 		u_int pci_ioaddr;
 		cs->subtyp = 0;
 		if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
@@ -356,7 +357,7 @@
 		printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
 		printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
 		return 0;
-#endif				/* CONFIG_PCI */
+#endif				/* CONFIG_PCI_LEGACY */
 	}
 	printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
 		CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 03dfc32..95425f3 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -600,7 +600,7 @@
 }
 #endif /* __ISAPNP__ */
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCI_LEGACY
 static struct pci_dev *dev_sedl __devinitdata = NULL;
 
 static int __devinit
@@ -675,7 +675,7 @@
 	return (1);
 }
 
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI_LEGACY */
 
 int __devinit
 setup_sedlbauer(struct IsdnCard *card)
diff --git a/drivers/isdn/sc/card.h b/drivers/isdn/sc/card.h
index 5992f63..0120bcf 100644
--- a/drivers/isdn/sc/card.h
+++ b/drivers/isdn/sc/card.h
@@ -109,7 +109,7 @@
 int get_card_from_id(int driver);
 int indicate_status(int card, int event, ulong Channel, char *Data);
 irqreturn_t interrupt_handler(int interrupt, void *cardptr);
-int sndpkt(int devId, int channel, struct sk_buff *data);
+int sndpkt(int devId, int channel, int ack, struct sk_buff *data);
 void rcvpkt(int card, RspMessage *rcvmsg);
 int command(isdn_ctrl *cmd);
 int reset(int card);
diff --git a/drivers/isdn/sc/packet.c b/drivers/isdn/sc/packet.c
index 92016a2..5ff6ae8 100644
--- a/drivers/isdn/sc/packet.c
+++ b/drivers/isdn/sc/packet.c
@@ -20,7 +20,7 @@
 #include "message.h"
 #include "card.h"
 
-int sndpkt(int devId, int channel, struct sk_buff *data)
+int sndpkt(int devId, int channel, int ack, struct sk_buff *data)
 {
 	LLData	ReqLnkWrite;
 	int status;
diff --git a/drivers/isdn/sc/shmem.c b/drivers/isdn/sc/shmem.c
index e0331e0..712220c 100644
--- a/drivers/isdn/sc/shmem.c
+++ b/drivers/isdn/sc/shmem.c
@@ -50,7 +50,7 @@
 
 	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
 		sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memcpy_toio(sc_adapter[card]->rambase + dest_rem, src, n);
+	memcpy_toio((void __iomem *)(sc_adapter[card]->rambase + dest_rem), src, n);
 	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
 	pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
 		((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c
index 729f1cd..7a6eead 100644
--- a/drivers/kvm/svm.c
+++ b/drivers/kvm/svm.c
@@ -494,6 +494,7 @@
 		 */
 		/*              (1ULL << INTERCEPT_SELECTIVE_CR0) | */
 				(1ULL << INTERCEPT_CPUID) |
+				(1ULL << INTERCEPT_INVD) |
 				(1ULL << INTERCEPT_HLT) |
 				(1ULL << INTERCEPT_INVLPGA) |
 				(1ULL << INTERCEPT_IOIO_PROT) |
@@ -507,6 +508,7 @@
 				(1ULL << INTERCEPT_STGI) |
 				(1ULL << INTERCEPT_CLGI) |
 				(1ULL << INTERCEPT_SKINIT) |
+				(1ULL << INTERCEPT_WBINVD) |
 				(1ULL << INTERCEPT_MONITOR) |
 				(1ULL << INTERCEPT_MWAIT);
 
@@ -561,6 +563,12 @@
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	init_vmcb(svm->vmcb);
+
+	if (vcpu->vcpu_id != 0) {
+		svm->vmcb->save.rip = 0;
+		svm->vmcb->save.cs.base = svm->vcpu.sipi_vector << 12;
+		svm->vmcb->save.cs.selector = svm->vcpu.sipi_vector << 8;
+	}
 }
 
 static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
@@ -1241,6 +1249,7 @@
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
 	/* [SVM_EXIT_CR0_SEL_WRITE]		= emulate_on_interception, */
 	[SVM_EXIT_CPUID]			= cpuid_interception,
+	[SVM_EXIT_INVD]                         = emulate_on_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= emulate_on_interception,
 	[SVM_EXIT_INVLPGA]			= invalid_op_interception,
@@ -1255,6 +1264,7 @@
 	[SVM_EXIT_STGI]				= invalid_op_interception,
 	[SVM_EXIT_CLGI]				= invalid_op_interception,
 	[SVM_EXIT_SKINIT]			= invalid_op_interception,
+	[SVM_EXIT_WBINVD]                       = emulate_on_interception,
 	[SVM_EXIT_MONITOR]			= invalid_op_interception,
 	[SVM_EXIT_MWAIT]			= invalid_op_interception,
 };
@@ -1579,10 +1589,6 @@
 #endif
 		: "cc", "memory" );
 
-	local_irq_disable();
-
-	stgi();
-
 	if ((svm->vmcb->save.dr7 & 0xff))
 		load_db_regs(svm->host_db_regs);
 
@@ -1599,6 +1605,10 @@
 
 	reload_tss(vcpu);
 
+	local_irq_disable();
+
+	stgi();
+
 	svm->next_rip = 0;
 }
 
diff --git a/drivers/kvm/x86_emulate.c b/drivers/kvm/x86_emulate.c
index a6ace30..33b1814 100644
--- a/drivers/kvm/x86_emulate.c
+++ b/drivers/kvm/x86_emulate.c
@@ -167,7 +167,7 @@
 static u16 twobyte_table[256] = {
 	/* 0x00 - 0x0F */
 	0, SrcMem | ModRM | DstReg, 0, 0, 0, 0, ImplicitOps, 0,
-	0, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
 	/* 0x10 - 0x1F */
 	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x20 - 0x2F */
@@ -980,17 +980,6 @@
 			goto cannot_emulate;
 		dst.val = (s32) src.val;
 		break;
-	case 0x6a: /* push imm8 */
-		src.val = 0L;
-		src.val = insn_fetch(s8, 1, _eip);
-push:
-		dst.type  = OP_MEM;
-		dst.bytes = op_bytes;
-		dst.val = src.val;
-		register_address_increment(_regs[VCPU_REGS_RSP], -op_bytes);
-		dst.ptr = (void *) register_address(ctxt->ss_base,
-							_regs[VCPU_REGS_RSP]);
-		break;
 	case 0x80 ... 0x83:	/* Grp1 */
 		switch (modrm_reg) {
 		case 0:
@@ -1243,6 +1232,17 @@
 		register_address_increment(_regs[VCPU_REGS_RSP], op_bytes);
 		no_wb = 1; /* Disable writeback. */
 		break;
+	case 0x6a: /* push imm8 */
+		src.val = 0L;
+		src.val = insn_fetch(s8, 1, _eip);
+	push:
+		dst.type  = OP_MEM;
+		dst.bytes = op_bytes;
+		dst.val = src.val;
+		register_address_increment(_regs[VCPU_REGS_RSP], -op_bytes);
+		dst.ptr = (void *) register_address(ctxt->ss_base,
+							_regs[VCPU_REGS_RSP]);
+		break;
 	case 0x6c:		/* insb */
 	case 0x6d:		/* insw/insd */
 		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
@@ -1532,6 +1532,8 @@
 	case 0x06:
 		emulate_clts(ctxt->vcpu);
 		break;
+	case 0x08:		/* invd */
+		break;
 	case 0x09:		/* wbinvd */
 		break;
 	case 0x0d:		/* GrpP (prefetch) */
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 47d90db..99bc500 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -60,7 +60,7 @@
 		gpio_set_value(led_dat->gpio, level);
 }
 
-static int __init gpio_led_probe(struct platform_device *pdev)
+static int gpio_led_probe(struct platform_device *pdev)
 {
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_led *cur_led;
@@ -93,13 +93,13 @@
 
 		gpio_direction_output(led_dat->gpio, led_dat->active_low);
 
+		INIT_WORK(&led_dat->work, gpio_led_work);
+
 		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 		if (ret < 0) {
 			gpio_free(led_dat->gpio);
 			goto err;
 		}
-
-		INIT_WORK(&led_dat->work, gpio_led_work);
 	}
 
 	platform_set_drvdata(pdev, leds_data);
@@ -110,17 +110,17 @@
 	if (i > 0) {
 		for (i = i - 1; i >= 0; i--) {
 			led_classdev_unregister(&leds_data[i].cdev);
+			cancel_work_sync(&leds_data[i].work);
 			gpio_free(leds_data[i].gpio);
 		}
 	}
 
-	flush_scheduled_work();
 	kfree(leds_data);
 
 	return ret;
 }
 
-static int __exit gpio_led_remove(struct platform_device *pdev)
+static int __devexit gpio_led_remove(struct platform_device *pdev)
 {
 	int i;
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
@@ -130,9 +130,10 @@
 
 	for (i = 0; i < pdata->num_leds; i++) {
 		led_classdev_unregister(&leds_data[i].cdev);
+		cancel_work_sync(&leds_data[i].work);
 		gpio_free(leds_data[i].gpio);
 	}
-	
+
 	kfree(leds_data);
 
 	return 0;
@@ -144,7 +145,7 @@
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_led_data *leds_data;
 	int i;
-	
+
 	leds_data = platform_get_drvdata(pdev);
 
 	for (i = 0; i < pdata->num_leds; i++)
@@ -172,7 +173,8 @@
 #endif
 
 static struct platform_driver gpio_led_driver = {
-	.remove		= __exit_p(gpio_led_remove),
+	.probe		= gpio_led_probe,
+	.remove		= __devexit_p(gpio_led_remove),
 	.suspend	= gpio_led_suspend,
 	.resume		= gpio_led_resume,
 	.driver		= {
@@ -183,7 +185,7 @@
 
 static int __init gpio_led_init(void)
 {
-	return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
+	return platform_driver_register(&gpio_led_driver);
 }
 
 static void __exit gpio_led_exit(void)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 8904f72..66f3872 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -200,7 +200,8 @@
 
 	/* Figure out how many pages the ring will take, and map that memory */
 	lvq->pages = lguest_map((unsigned long)lvq->config.pfn << PAGE_SHIFT,
-				DIV_ROUND_UP(vring_size(lvq->config.num),
+				DIV_ROUND_UP(vring_size(lvq->config.num,
+							PAGE_SIZE),
 					     PAGE_SIZE));
 	if (!lvq->pages) {
 		err = -ENOMEM;
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 9d716fa..3b92a61 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -184,7 +184,7 @@
 free_regs:
 	free_page(lg->regs_page);
 release_guest:
-	memset(lg, 0, sizeof(*lg));
+	kfree(lg);
 unlock:
 	mutex_unlock(&lguest_lock);
 	return err;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 516d943..075b4d9 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -94,7 +94,9 @@
 	DBG("wf: thread started\n");
 
 	set_freezable();
-	while(!kthread_should_stop()) {
+	while (!kthread_should_stop()) {
+		try_to_freeze();
+
 		if (time_after_eq(jiffies, next)) {
 			wf_notify(WF_EVENT_TICK, NULL);
 			if (wf_overtemp) {
@@ -116,12 +118,6 @@
 		delay = next - jiffies;
 		if (delay <= HZ)
 			schedule_timeout_interruptible(delay);
-
-		/* there should be no non-suspend signal, but oh well */
-		if (signal_pending(current) && !try_to_freeze()) {
-			printk(KERN_WARNING "windfarm: thread got sigl !\n");
-			break;
-		}
 	}
 
 	DBG("wf: thread stopped\n");
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 7c426d0..1b1ef31 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1207,8 +1207,7 @@
 			prepare_to_wait(&bitmap->overflow_wait, &__wait,
 					TASK_UNINTERRUPTIBLE);
 			spin_unlock_irq(&bitmap->lock);
-			bitmap->mddev->queue
-				->unplug_fn(bitmap->mddev->queue);
+			blk_unplug(bitmap->mddev->queue);
 			schedule();
 			finish_wait(&bitmap->overflow_wait, &__wait);
 			continue;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 5a7eb65..e298d8d 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1000,8 +1000,7 @@
 		struct dm_dev *dd = list_entry(d, struct dm_dev, list);
 		struct request_queue *q = bdev_get_queue(dd->bdev);
 
-		if (q->unplug_fn)
-			q->unplug_fn(q);
+		blk_unplug(q);
 	}
 }
 
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 56a11f6..3dac1cf 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -87,8 +87,7 @@
 
 	for (i=0; i < mddev->raid_disks; i++) {
 		struct request_queue *r_queue = bdev_get_queue(conf->disks[i].rdev->bdev);
-		if (r_queue->unplug_fn)
-			r_queue->unplug_fn(r_queue);
+		blk_unplug(r_queue);
 	}
 }
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 808cd95..cef9ebd 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5445,7 +5445,7 @@
 		 * about not overloading the IO subsystem. (things like an
 		 * e2fsck being done on the RAID array should execute fast)
 		 */
-		mddev->queue->unplug_fn(mddev->queue);
+		blk_unplug(mddev->queue);
 		cond_resched();
 
 		currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2
@@ -5464,7 +5464,7 @@
 	 * this also signals 'finished resyncing' to md_stop
 	 */
  out:
-	mddev->queue->unplug_fn(mddev->queue);
+	blk_unplug(mddev->queue);
 
 	wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
 
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index b35731c..eb631eb 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -125,8 +125,7 @@
 			atomic_inc(&rdev->nr_pending);
 			rcu_read_unlock();
 
-			if (r_queue->unplug_fn)
-				r_queue->unplug_fn(r_queue);
+			blk_unplug(r_queue);
 
 			rdev_dec_pending(rdev, mddev);
 			rcu_read_lock();
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index c111105..f8e5917 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -35,8 +35,7 @@
 	for (i=0; i<mddev->raid_disks; i++) {
 		struct request_queue *r_queue = bdev_get_queue(devlist[i]->bdev);
 
-		if (r_queue->unplug_fn)
-			r_queue->unplug_fn(r_queue);
+		blk_unplug(r_queue);
 	}
 }
 
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 85478d6..4a69c41 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -549,8 +549,7 @@
 			atomic_inc(&rdev->nr_pending);
 			rcu_read_unlock();
 
-			if (r_queue->unplug_fn)
-				r_queue->unplug_fn(r_queue);
+			blk_unplug(r_queue);
 
 			rdev_dec_pending(rdev, mddev);
 			rcu_read_lock();
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index fc6607a..5cdcc93 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -593,8 +593,7 @@
 			atomic_inc(&rdev->nr_pending);
 			rcu_read_unlock();
 
-			if (r_queue->unplug_fn)
-				r_queue->unplug_fn(r_queue);
+			blk_unplug(r_queue);
 
 			rdev_dec_pending(rdev, mddev);
 			rcu_read_lock();
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 80a67d7..a5aad8c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -688,7 +688,8 @@
 }
 
 static struct dma_async_tx_descriptor *
-ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx,
+		 unsigned long pending)
 {
 	int disks = sh->disks;
 	int pd_idx = sh->pd_idx, i;
@@ -696,7 +697,7 @@
 	/* check if prexor is active which means only process blocks
 	 * that are part of a read-modify-write (Wantprexor)
 	 */
-	int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+	int prexor = test_bit(STRIPE_OP_PREXOR, &pending);
 
 	pr_debug("%s: stripe %llu\n", __FUNCTION__,
 		(unsigned long long)sh->sector);
@@ -773,7 +774,8 @@
 }
 
 static void
-ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx,
+		unsigned long pending)
 {
 	/* kernel stack size limits the total number of disks */
 	int disks = sh->disks;
@@ -781,7 +783,7 @@
 
 	int count = 0, pd_idx = sh->pd_idx, i;
 	struct page *xor_dest;
-	int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+	int prexor = test_bit(STRIPE_OP_PREXOR, &pending);
 	unsigned long flags;
 	dma_async_tx_callback callback;
 
@@ -808,7 +810,7 @@
 	}
 
 	/* check whether this postxor is part of a write */
-	callback = test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending) ?
+	callback = test_bit(STRIPE_OP_BIODRAIN, &pending) ?
 		ops_complete_write : ops_complete_postxor;
 
 	/* 1/ if we prexor'd then the dest is reused as a source
@@ -896,12 +898,12 @@
 		tx = ops_run_prexor(sh, tx);
 
 	if (test_bit(STRIPE_OP_BIODRAIN, &pending)) {
-		tx = ops_run_biodrain(sh, tx);
+		tx = ops_run_biodrain(sh, tx, pending);
 		overlap_clear++;
 	}
 
 	if (test_bit(STRIPE_OP_POSTXOR, &pending))
-		ops_run_postxor(sh, tx);
+		ops_run_postxor(sh, tx, pending);
 
 	if (test_bit(STRIPE_OP_CHECK, &pending))
 		ops_run_check(sh);
@@ -2624,6 +2626,13 @@
 	s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
 	/* Now to look around and see what can be done */
 
+	/* clean-up completed biofill operations */
+	if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) {
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
+		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
+	}
+
 	rcu_read_lock();
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
@@ -2897,13 +2906,6 @@
 	s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
 	/* Now to look around and see what can be done */
 
-	/* clean-up completed biofill operations */
-	if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) {
-		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
-		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
-		clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete);
-	}
-
 	rcu_read_lock();
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
@@ -3186,8 +3188,7 @@
 			atomic_inc(&rdev->nr_pending);
 			rcu_read_unlock();
 
-			if (r_queue->unplug_fn)
-				r_queue->unplug_fn(r_queue);
+			blk_unplug(r_queue);
 
 			rdev_dec_pending(rdev, mddev);
 			rcu_read_lock();
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index dd9bd43..1604f04 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -151,6 +151,7 @@
 
 config VIDEO_IR
 	tristate
+	depends on INPUT
 	select VIDEO_IR_I2C if I2C
 
 config VIDEO_TVEEPROM
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index cb034ea..7d04a6f 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -59,43 +59,89 @@
 }
 
 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
 {
-	unsigned long start;
+	unsigned long timeout;
 	int err;
 
 	/* wait for registers to be programmed */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us1);
 	while (1) {
-		err = time_after(jiffies, start + HZ/20);
+		err = time_after(jiffies, timeout);
 		if (saa7146_read(dev, MC2) & 2)
 			break;
 		if (err) {
-			DEB_S(("timed out while waiting for registers getting programmed\n"));
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	/* wait for transfer to complete */
-	start = jiffies;
+	timeout = jiffies + usecs_to_jiffies(us2);
 	while (1) {
-		err = time_after(jiffies, start + HZ/4);
+		err = time_after(jiffies, timeout);
 		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
 			break;
 		saa7146_read(dev, MC2);
 		if (err) {
-			DEB_S(("timed out while waiting for transfer completion\n"));
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n",	dev->name, __FUNCTION__));
 			return -ETIMEDOUT;
 		}
-		if (nobusyloop)
-			msleep(1);
+		msleep(1);
 	}
 
 	return 0;
 }
 
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long loops;
+
+	/* wait for registers to be programmed */
+	loops = us1;
+	while (1) {
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (!loops--) {
+			printk(KERN_ERR "%s: %s timed out while waiting for "
+					"registers getting programmed\n",
+					dev->name, __FUNCTION__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	/* wait for transfer to complete */
+	loops = us2 / 5;
+	while (1) {
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (!loops--) {
+			DEB_S(("%s: %s timed out while waiting for transfer "
+				"completion\n", dev->name, __FUNCTION__));
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+
+	return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+	if (nobusyloop)
+		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+	else
+		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
 /****************************************************************************
  * general helper functions
  ****************************************************************************/
diff --git a/drivers/media/dvb/frontends/mt2131.c b/drivers/media/dvb/frontends/mt2131.c
index 4b93931..13cf166 100644
--- a/drivers/media/dvb/frontends/mt2131.c
+++ b/drivers/media/dvb/frontends/mt2131.c
@@ -116,7 +116,7 @@
 	f_lo1 = (f_lo1 / 250) * 250;
 	f_lo2 = f_lo1 - freq - MT2131_IF2;
 
-	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
 
 	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
 	num1 = f_lo1 * 64 / (MT2131_FREF / 128);
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 30e8a70..8dee7ec 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -42,6 +42,9 @@
 	fe_modulation_t current_modulation;
 
 	u32 current_frequency;
+
+	u32 is_qam_locked;
+	u32 qam_state;
 };
 
 static int debug = 0;
@@ -94,6 +97,7 @@
 	{ 0xac, 0x1003, },
 	{ 0xad, 0x103f, },
 	{ 0xe2, 0x0100, },
+	{ 0xe3, 0x0000, },
 	{ 0x28, 0x1010, },
 	{ 0xb1, 0x000e, },
 };
@@ -335,6 +339,8 @@
 
 	s5h1409_writereg(state, 0xf5, 0);
 	s5h1409_writereg(state, 0xf5, 1);
+	state->is_qam_locked = 0;
+	state->qam_state = 0;
 	return 0;
 }
 
@@ -349,6 +355,11 @@
 		s5h1409_writereg(state, 0x87, 0x01be);
 		s5h1409_writereg(state, 0x88, 0x0436);
 		s5h1409_writereg(state, 0x89, 0x054d);
+	} else
+	if (KHz == 4000) {
+		s5h1409_writereg(state, 0x87, 0x014b);
+		s5h1409_writereg(state, 0x88, 0x0cb5);
+		s5h1409_writereg(state, 0x89, 0x03e2);
 	} else {
 		printk("%s() Invalid arg = %d KHz\n", __FUNCTION__, KHz);
 		ret = -1;
@@ -361,7 +372,7 @@
 {
 	struct s5h1409_state* state = fe->demodulator_priv;
 
-	dprintk("%s()\n", __FUNCTION__);
+	dprintk("%s(%d)\n", __FUNCTION__, inverted);
 
 	if(inverted == 1)
 		return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */
@@ -382,14 +393,10 @@
 		s5h1409_writereg(state, 0xf4, 0);
 		break;
 	case QAM_64:
-		dprintk("%s() QAM_64\n", __FUNCTION__);
-		s5h1409_writereg(state, 0xf4, 1);
-		s5h1409_writereg(state, 0x85, 0x100);
-		break;
 	case QAM_256:
-		dprintk("%s() QAM_256\n", __FUNCTION__);
+		dprintk("%s() QAM_AUTO (64/256)\n", __FUNCTION__);
 		s5h1409_writereg(state, 0xf4, 1);
-		s5h1409_writereg(state, 0x85, 0x101);
+		s5h1409_writereg(state, 0x85, 0x110);
 		break;
 	default:
 		dprintk("%s() Invalid modulation\n", __FUNCTION__);
@@ -423,7 +430,7 @@
 	if (enable)
 		return s5h1409_writereg(state, 0xe3, 0x1100);
 	else
-		return s5h1409_writereg(state, 0xe3, 0);
+		return s5h1409_writereg(state, 0xe3, 0x1000);
 }
 
 static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
@@ -444,6 +451,66 @@
 	return s5h1409_writereg(state, 0xfa, 0);
 }
 
+static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe)
+{
+	struct s5h1409_state *state = fe->demodulator_priv;
+	u16 reg;
+
+	if (state->is_qam_locked)
+		return;
+
+	/* QAM EQ lock check */
+	reg = s5h1409_readreg(state, 0xf0);
+
+	if ((reg >> 13) & 0x1) {
+
+		state->is_qam_locked = 1;
+		reg &= 0xff;
+
+		s5h1409_writereg(state, 0x96, 0x00c);
+		if ((reg < 0x38) || (reg > 0x68) ) {
+			s5h1409_writereg(state, 0x93, 0x3332);
+			s5h1409_writereg(state, 0x9e, 0x2c37);
+		} else {
+			s5h1409_writereg(state, 0x93, 0x3130);
+			s5h1409_writereg(state, 0x9e, 0x2836);
+		}
+
+	} else {
+		s5h1409_writereg(state, 0x96, 0x0008);
+		s5h1409_writereg(state, 0x93, 0x3332);
+		s5h1409_writereg(state, 0x9e, 0x2c37);
+	}
+}
+
+static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe)
+{
+	struct s5h1409_state *state = fe->demodulator_priv;
+	u16 reg, reg1, reg2;
+
+	reg = s5h1409_readreg(state, 0xf1);
+
+	/* Master lock */
+	if ((reg >> 15) & 0x1) {
+		if (state->qam_state != 2) {
+			state->qam_state = 2;
+			reg1 = s5h1409_readreg(state, 0xb2);
+			reg2 = s5h1409_readreg(state, 0xad);
+
+			s5h1409_writereg(state, 0x96, 0x20);
+			s5h1409_writereg(state, 0xad,
+				( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) );
+			s5h1409_writereg(state, 0xab, 0x1100);
+		}
+	} else {
+		if (state->qam_state != 1) {
+			state->qam_state = 1;
+			s5h1409_writereg(state, 0x96, 0x08);
+			s5h1409_writereg(state, 0xab, 0x1101);
+		}
+	}
+}
+
 /* Talk to the demod, set the FEC, GUARD, QAM settings etc */
 static int s5h1409_set_frontend (struct dvb_frontend* fe,
 				 struct dvb_frontend_parameters *p)
@@ -458,12 +525,21 @@
 
 	s5h1409_enable_modulation(fe, p->u.vsb.modulation);
 
+	/* Allow the demod to settle */
+	msleep(100);
+
 	if (fe->ops.tuner_ops.set_params) {
 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1);
 		fe->ops.tuner_ops.set_params(fe, p);
 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
+	/* Optimize the demod for QAM */
+	if (p->u.vsb.modulation != VSB_8) {
+		s5h1409_set_qam_amhum_mode(fe);
+		s5h1409_set_qam_interleave_mode(fe);
+	}
+
 	return 0;
 }
 
@@ -495,8 +571,8 @@
 	s5h1409_set_gpio(fe, state->config->gpio);
 	s5h1409_softreset(fe);
 
-	/* Note: Leaving the I2C gate open here. */
-	s5h1409_i2c_gate_ctrl(fe, 1);
+	/* Note: Leaving the I2C gate closed. */
+	s5h1409_i2c_gate_ctrl(fe, 0);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 17e5cb5..7c23775 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -358,11 +358,23 @@
 static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
 {
 	struct stv0297_state *state = fe->demodulator_priv;
-	u8 STRENGTH[2];
+	u8 STRENGTH[3];
+	u16 tmp;
 
-	stv0297_readregs(state, 0x41, STRENGTH, 2);
-	*strength = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
-
+	stv0297_readregs(state, 0x41, STRENGTH, 3);
+	tmp = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0];
+	if (STRENGTH[2] & 0x20) {
+		if (tmp < 0x200)
+			tmp = 0;
+		else
+			tmp = tmp - 0x200;
+	} else {
+		if (tmp > 0x1ff)
+			tmp = 0;
+		else
+			tmp = 0x1ff - tmp;
+	}
+	*strength = (tmp << 7) | (tmp >> 2);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 4cd9e82..45137d2 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -301,6 +301,8 @@
 	u32 _ber = tda10021_readreg(state, 0x14) |
 		(tda10021_readreg(state, 0x15) << 8) |
 		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
+	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
+					| (tda10021_inittab[0x10] & 0xc0));
 	*ber = 10 * _ber;
 
 	return 0;
@@ -310,7 +312,11 @@
 {
 	struct tda10021_state* state = fe->demodulator_priv;
 
+	u8 config = tda10021_readreg(state, 0x02);
 	u8 gain = tda10021_readreg(state, 0x17);
+	if (config & 0x02)
+		/* the agc value is inverted */
+		gain = ~gain;
 	*strength = (gain << 8) | gain;
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c
index 066b73b..60433b5 100644
--- a/drivers/media/dvb/frontends/ves1820.c
+++ b/drivers/media/dvb/frontends/ves1820.c
@@ -47,7 +47,7 @@
 static int verbose;
 
 static u8 ves1820_inittab[] = {
-	0x69, 0x6A, 0x93, 0x12, 0x12, 0x46, 0x26, 0x1A,
+	0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A,
 	0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20,
 	0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 6d53289..54b91f2 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -84,7 +84,7 @@
 
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
-	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 && INPUT
 	select VIDEO_SAA7146
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 2e571eb..c9f14bf 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -363,7 +363,7 @@
 
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
-	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
+	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
 	select VIDEOBUF_VMALLOC
 	default n
 	---help---
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 9feeb63..a88b56e 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -2881,10 +2881,6 @@
 		if (NULL == fmt)
 			return -EINVAL;
 		mutex_lock(&fh->cap.lock);
-		if (fmt->depth != pic->depth) {
-			retval = -EINVAL;
-			goto fh_unlock_and_return;
-		}
 		if (fmt->flags & FORMAT_FLAGS_RAW) {
 			/* VIDIOCMCAPTURE uses gbufsize, not RAW_BPL *
 			   RAW_LINES * 2. F1 is stored at offset 0, F2
@@ -3117,6 +3113,8 @@
 					     vm->width,vm->height,field);
 		if (0 != retval)
 			goto fh_unlock_and_return;
+		btv->init.width = vm->width;
+		btv->init.height = vm->height;
 		spin_lock_irqsave(&btv->s_lock,flags);
 		buffer_queue(&fh->cap,&buf->vb);
 		spin_unlock_irqrestore(&btv->s_lock,flags);
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index b63cab3..7ae499c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -3,6 +3,9 @@
  * multifunction chip.  Currently works with the Omnivision OV7670
  * sensor.
  *
+ * The data sheet for this device can be found at:
+ *    http://www.marvell.com/products/pcconn/88ALP01.jsp
+ *
  * Copyright 2006 One Laptop Per Child Association, Inc.
  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
  *
@@ -2232,13 +2235,16 @@
 {
 	struct cafe_camera *cam = cafe_find_by_pdev(pdev);
 	int ret;
+	enum cafe_state cstate;
 
 	ret = pci_save_state(pdev);
 	if (ret)
 		return ret;
+	cstate = cam->state; /* HACK - stop_dma sets to idle */
 	cafe_ctlr_stop_dma(cam);
 	cafe_ctlr_power_down(cam);
 	pci_disable_device(pdev);
+	cam->state = cstate;
 	return 0;
 }
 
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 72004a0..d8b1ccb 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CX23885
 	tristate "Conexant cx23885 (2388x successor) support"
-	depends on DVB_CORE && VIDEO_DEV && PCI && I2C
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index eeb5224..ceb31d4 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && INPUT
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5b6a403..c112780 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_EM28XX
 	tristate "Empia EM2800/2820/2840 USB video capture support"
-	depends on VIDEO_V4L1 && I2C
+	depends on VIDEO_V4L1 && I2C && INPUT
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 997d067..e3a4aa7 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -416,8 +416,10 @@
 	struct em28xx *dev = client->adapter->algo_data;
 
 	switch (client->addr << 1) {
-		case 0x43:
-		case 0x4b:
+		case 0x86:
+		case 0x84:
+		case 0x96:
+		case 0x94:
 		{
 			struct tuner_setup tun_setup;
 
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a4c2a90..2529c29 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -32,6 +32,7 @@
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <linux/version.h>
+#include <linux/mm.h>
 #include <linux/video_decoder.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index ce4b2f9..36047d4 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -91,7 +91,6 @@
 static int planb_ioctl(struct video_device *, unsigned int, void *);
 static int planb_init_done(struct video_device *);
 static int planb_mmap(struct video_device *, const char *, unsigned long);
-static void planb_irq(int, void *);
 static void release_planb(void);
 int init_planbs(struct video_init *);
 
@@ -1315,7 +1314,7 @@
 	return c1;
 }
 
-static void planb_irq(int irq, void *dev_id)
+static irqreturn_t planb_irq(int irq, void *dev_id)
 {
 	unsigned int stat, astat;
 	struct planb *pb = (struct planb *)dev_id;
@@ -1358,13 +1357,14 @@
 		pb->frame_stat[fr] = GBUFFER_DONE;
 		pb->grabbing--;
 		wake_up_interruptible(&pb->capq);
-		return;
+		return IRQ_HANDLED;
 	}
 	/* incorrect interrupts? */
 	pb->intr_mask = PLANB_CLR_IRQ;
 	out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
 	printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
 							" unconditionally\n");
+	return IRQ_HANDLED;
 }
 
 /*******************************
@@ -2090,7 +2090,7 @@
 	/* clear interrupt mask */
 	pb->intr_mask = PLANB_CLR_IRQ;
 
-	result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
+	result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb);
 	if (result < 0) {
 		if (result==-EINVAL)
 			printk(KERN_ERR "PlanB: Bad irq number (%d) "
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index f569b00..46f156f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -410,7 +410,7 @@
 	int msk;
 	*valptr = 0;
 	for (idx = 0, msk = 1; valid_bits; idx++, msk <<= 1) {
-		if (!msk & valid_bits) continue;
+		if (!(msk & valid_bits)) continue;
 		valid_bits &= ~msk;
 		if (!names[idx]) continue;
 		slen = strlen(names[idx]);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index ca9e278..11b3b2e 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -136,14 +136,13 @@
 
 static void __exit pvr_exit(void)
 {
-
 	pvr2_trace(PVR2_TRACE_INIT,"pvr_exit");
 
+	usb_deregister(&pvr_driver);
+
 #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
 	pvr2_sysfs_class_destroy(class_ptr);
 #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
-
-	usb_deregister(&pvr_driver);
 }
 
 module_init(pvr_init);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 2ee3c30..3c57a7d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -905,13 +905,6 @@
 }
 
 
-static int pvr2_sysfs_hotplug(struct device *d,
-			      struct kobj_uevent_env *env)
-{
-	/* Even though we don't do anything here, we still need this function
-	   because sysfs will still try to call it. */
-	return 0;
-}
 
 struct pvr2_sysfs_class *pvr2_sysfs_class_create(void)
 {
@@ -922,7 +915,6 @@
 	clp->class.name = "pvrusb2";
 	clp->class.class_release = pvr2_sysfs_class_release;
 	clp->class.dev_release = pvr2_sysfs_release;
-	clp->class.dev_uevent = pvr2_sysfs_hotplug;
 	if (class_register(&clp->class)) {
 		pvr2_sysfs_trace(
 			"Registration failed for pvr2_sysfs_class id=%p",clp);
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index d6d8d66..3aa8cb2 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_SAA7134
 	tristate "Philips SAA7134 support"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && INPUT
 	select VIDEOBUF_DMA_SG
 	select VIDEO_IR
 	select VIDEO_TUNER
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index c6f7279..b9c5cf7 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -543,8 +543,10 @@
 	   V4L functions, and force ALSA to use that as the DMA area */
 
 	substream->runtime->dma_area = dev->dmasound.dma.vmalloc;
+	substream->runtime->dma_bytes = dev->dmasound.bufsize;
+	substream->runtime->dma_addr = 0;
 
-	return 1;
+	return 0;
 
 }
 
@@ -652,6 +654,17 @@
 }
 
 /*
+ * page callback (needed for mmap)
+ */
+
+static struct page *snd_card_saa7134_page(struct snd_pcm_substream *substream,
+					unsigned long offset)
+{
+	void *pageptr = substream->runtime->dma_area + offset;
+	return vmalloc_to_page(pageptr);
+}
+
+/*
  * ALSA capture callbacks definition
  */
 
@@ -664,6 +677,7 @@
 	.prepare =		snd_card_saa7134_capture_prepare,
 	.trigger =		snd_card_saa7134_capture_trigger,
 	.pointer =		snd_card_saa7134_capture_pointer,
+	.page =			snd_card_saa7134_page,
 };
 
 /*
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index a4c192f..4f3dad9 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2996,11 +2996,11 @@
 		},{
 			.name   = name_comp1,
 			.vmux   = 0,
-			.amux   = LINE2,
+			.amux   = LINE1,
 		},{
 			.name   = name_svideo,
 			.vmux   = 8,
-			.amux   = LINE2,
+			.amux   = LINE1,
 		}},
 	},
 	[SAA7134_BOARD_FLYDVBS_LR300] = {
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 6a77760..9e99f363 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -30,7 +30,7 @@
 
 /* standard i2c insmod options */
 static unsigned short normal_i2c[] = {
-#ifdef CONFIG_TUNER_TEA5761
+#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE))
 	0x10,
 #endif
 	0x42, 0x43, 0x4a, 0x4b,			/* tda8290 */
@@ -292,7 +292,6 @@
 		}
 		t->mode_mask = T_RADIO;
 		break;
-#ifdef CONFIG_TUNER_TEA5761
 	case TUNER_TEA5761:
 		if (tea5761_attach(&t->fe, t->i2c.adapter, t->i2c.addr) == NULL) {
 			t->type = TUNER_ABSENT;
@@ -301,7 +300,6 @@
 		}
 		t->mode_mask = T_RADIO;
 		break;
-#endif
 	case TUNER_PHILIPS_FMD1216ME_MK3:
 		buffer[0] = 0x0b;
 		buffer[1] = 0xdc;
@@ -594,7 +592,6 @@
 	/* autodetection code based on the i2c addr */
 	if (!no_autodetect) {
 		switch (addr) {
-#ifdef CONFIG_TUNER_TEA5761
 		case 0x10:
 			if (tea5761_autodetection(t->i2c.adapter, t->i2c.addr) != EINVAL) {
 				t->type = TUNER_TEA5761;
@@ -606,7 +603,6 @@
 				goto register_client;
 			}
 			break;
-#endif
 		case 0x42:
 		case 0x43:
 		case 0x4a:
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index e2f1c97..25d0aef 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -799,10 +799,10 @@
 	tvp5150_write_inittab(c, tvp5150_init_enable);
 
 	/* Initialize image preferences */
-	tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright >> 8);
-	tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast >> 8);
-	tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast >> 8);
-	tvp5150_write(c, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8);
+	tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright);
+	tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast);
+	tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast);
+	tvp5150_write(c, TVP5150_HUE_CTL, decoder->hue);
 
 	tvp5150_set_std(c, decoder->norm);
 };
@@ -1077,10 +1077,10 @@
 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
 	core->route.input = TVP5150_COMPOSITE1;
 	core->enable = 1;
-	core->bright = 32768;
-	core->contrast = 32768;
-	core->hue = 32768;
-	core->sat = 32768;
+	core->bright = 128;
+	core->contrast = 128;
+	core->hue = 0;
+	core->sat = 128;
 
 	if (rv) {
 		kfree(c);
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 6824061..e4ad7a1 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -1077,8 +1077,8 @@
 	blk_queue_max_sectors(queue, max_sectors);
 	blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size));
 
-	osm_debug("max sectors = %d\n", queue->max_phys_segments);
-	osm_debug("phys segments = %d\n", queue->max_sectors);
+	osm_debug("max sectors = %d\n", queue->max_sectors);
+	osm_debug("phys segments = %d\n", queue->max_phys_segments);
 	osm_debug("max hw segments = %d\n", queue->max_hw_segments);
 
 	/*
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 6a5a05d..05172d2 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -244,10 +244,11 @@
 		    idd->idd_pdev->bus->number == pdev->bus->number &&
 		    3 == PCI_SLOT(pdev->devfn))
 			found = 1;
-		pci_dev_put(pdev);
 	} while (pdev && !found);
-	if (NULL != pdev)
+	if (NULL != pdev) {
+		pci_dev_put(pdev);
 		return IOC4_VARIANT_IO9;
+	}
 
 	/* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
 	pdev = NULL;
@@ -258,10 +259,11 @@
 		    idd->idd_pdev->bus->number == pdev->bus->number &&
 		    3 == PCI_SLOT(pdev->devfn))
 			found = 1;
-		pci_dev_put(pdev);
 	} while (pdev && !found);
-	if (NULL != pdev)
+	if (NULL != pdev) {
+		pci_dev_put(pdev);
 		return IOC4_VARIANT_IO10;
+	}
 
 	/* PCI-RT: No SCSI/SATA controller will be present */
 	return IOC4_VARIANT_PCI_RT;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 9203a0b..1b9c9b6 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -310,7 +310,7 @@
 		}
 
 		if (src_size == 0) {
-			src_buf = sg_virt(dst);
+			src_buf = sg_virt(src);
 			src_size = src->length;
 		}
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b80bf7..ff59d2e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1301,7 +1301,7 @@
 
 	if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
 		(host->flags & SDHCI_USE_DMA)) {
-		DBG("Disabling DMA as it is marked broken");
+		DBG("Disabling DMA as it is marked broken\n");
 		host->flags &= ~SDHCI_USE_DMA;
 	}
 
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index bb30d5b..2797da7 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -1192,6 +1192,8 @@
 			goto out;
 		}
 
+		dev->base_addr = ioaddr;
+
 		for (i = 0; i < 8; i++) {
 			eth_addr[i] = inb(ioaddr + 8 + i);
 			checksum += eth_addr[i];
@@ -1209,7 +1211,6 @@
 			goto out1;
 		}
 
-		dev->base_addr = ioaddr;
 		dev->irq = 10;
 	}
 #endif
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5f800a6..e8d69b0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -136,10 +136,11 @@
 	  If you don't know what to use this for, you don't need it.
 
 config VETH
-	tristate "Virtual ethernet device"
+	tristate "Virtual ethernet pair device"
 	---help---
-	  The device is an ethernet tunnel. Devices are created in pairs. When
-	  one end receives the packet it appears on its pair and vice versa.
+	  This device is a local ethernet tunnel. Devices are created in pairs.
+	  When one end receives the packet it appears on its pair and vice
+	  versa.
 
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
@@ -234,7 +235,7 @@
 
 config AX88796
 	tristate "ASIX AX88796 NE2000 clone support"
-	depends on ARM || MIPS
+	depends on ARM || MIPS || SUPERH
 	select CRC32
 	select MII
 	help
@@ -365,8 +366,7 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  To compile this driver as a module, choose M here. This module will
 	  be called mac89x0.
 
 config MACSONIC
@@ -379,8 +379,7 @@
 	  one of these say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  To compile this driver as a module, choose M here. This module will
 	  be called macsonic.
 
 config MACMACE
@@ -618,8 +617,7 @@
 	  have problems.  Some people suggest to ping ("man ping") a nearby
 	  machine every minute ("man cron") when using this card.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c501.
 
 config EL2
@@ -631,8 +629,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c503.
 
 config ELPLUS
@@ -644,8 +641,7 @@
 	  this type, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c505.
 
 config EL16
@@ -656,8 +652,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c507.
 
 config EL3
@@ -672,8 +667,7 @@
 	  setup disk to disable Plug & Play mode, and to select the default
 	  media type.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c509.
 
 config 3C515
@@ -684,8 +678,7 @@
 	  network card, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c515.
 
 config ELMC
@@ -696,8 +689,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c523.
 
 config ELMC_II
@@ -708,8 +700,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c527.
 
 config VORTEX
@@ -732,8 +723,7 @@
 	  <file:Documentation/networking/vortex.txt> and in the comments at
 	  the beginning of <file:drivers/net/3c59x.c>.
 
-	  To compile this support as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.
+	  To compile this support as a module, choose M here.
 
 config TYPHOON
 	tristate "3cr990 series \"Typhoon\" support"
@@ -750,8 +740,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called typhoon.
 
 config LANCE
@@ -788,8 +777,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called wd.
 
 config ULTRAMCA
@@ -801,8 +789,7 @@
 	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-mca.
 
 config ULTRA
@@ -821,8 +808,7 @@
 	  this but keep it in mind if you have such a SCSI card and have
 	  problems.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-ultra.
 
 config ULTRA32
@@ -834,8 +820,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-ultra32.
 
 config BFIN_MAC
@@ -896,8 +881,7 @@
 	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc9194.
 
 config SMC91X
@@ -915,8 +899,7 @@
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  The module will be called smc91x.  If you want to compile it as a
-	  module, say M here and read <file:Documentation/kbuild/modules.txt>
-	  as well as <file:Documentation/networking/net-modules.txt>.
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
 
 config NET_NETX
 	tristate "NetX Ethernet support"
@@ -925,8 +908,7 @@
 	help
 	  This is support for the Hilscher netX builtin Ethernet ports
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called netx-eth.
 
 config DM9000
@@ -937,9 +919,8 @@
 	---help---
 	  Support for DM9000 chipset.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called dm9000.
+	  To compile this driver as a module, choose M here.  The module
+	  will be called dm9000.
 
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
@@ -979,8 +960,7 @@
 	  <http://www.tldp.org/docs.html#howto>. Note that this is still
 	  experimental code.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni5010.
 
 config NI52
@@ -991,8 +971,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni52.
 
 config NI65
@@ -1003,8 +982,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni65.
 
 source "drivers/net/tulip/Kconfig"
@@ -1018,8 +996,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called at1700.
 
 config DEPCA
@@ -1032,8 +1009,7 @@
 	  <http://www.tldp.org/docs.html#howto> as well as
 	  <file:drivers/net/depca.c>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called depca.
 
 config HP100
@@ -1044,8 +1020,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp100.
 
 config NET_ISA
@@ -1074,8 +1049,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e2100.
 
 config EWRK3
@@ -1089,8 +1063,7 @@
 	  well as the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ewrk3.
 
 config EEXPRESS
@@ -1104,8 +1077,7 @@
 	  because the driver was very unreliable. We now have a new driver
 	  that should do better.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eexpress.
 
 config EEXPRESS_PRO
@@ -1118,8 +1090,7 @@
 	  driver.  Please read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eepro.
 
 config HPLAN_PLUS
@@ -1131,8 +1102,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp-plus.
 
 config HPLAN
@@ -1144,8 +1114,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp.
 
 config LP486E
@@ -1164,8 +1133,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eth16i.
 
 config NE2000
@@ -1185,8 +1153,7 @@
 	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
 	  below.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne.
 
 config ZNET
@@ -1207,8 +1174,7 @@
 	  is for you, read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called seeq8005.
 
 config NE2_MCA
@@ -1220,8 +1186,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne2.
 
 config IBMLANA
@@ -1232,8 +1197,7 @@
 	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
 	  driver and as a module.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The only
+	  To compile this driver as a module, choose M here. The only
 	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
 	  will both support 16K and 32K memory windows, however a 32K window
 	  gives a better security against packet losses.  Usage of multiple
@@ -1247,8 +1211,7 @@
 	  This driver supports virtual ethernet adapters on newer IBM iSeries
 	  and pSeries systems.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called ibmveth.
 
 source "drivers/net/ibm_emac/Kconfig"
@@ -1278,8 +1241,7 @@
 	  answer Y here and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called pcnet32.
 
 config PCNET32_NAPI
@@ -1306,8 +1268,7 @@
 	  answer Y here and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called amd8111e.
 
 config AMD8111E_NAPI
@@ -1361,8 +1322,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ac3200.
 
 config APRICOT
@@ -1373,9 +1333,8 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called apricot.
+	  To compile this driver as a module, choose M here. The module
+	  will be called apricot.
 
 config B44
 	tristate "Broadcom 440x/47xx ethernet support"
@@ -1387,9 +1346,8 @@
 	  or M and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called b44.
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
 
 # Auto-select SSB PCI-HOST support, if possible
 config B44_PCI_AUTOSELECT
@@ -1418,9 +1376,8 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called forcedeth.
+	  To compile this driver as a module, choose M here. The module
+	  will be called forcedeth.
 
 config FORCEDETH_NAPI
 	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -1446,9 +1403,8 @@
 	  <http://www.tldp.org/docs.html#howto> as well as
 	  <file:Documentation/networking/cs89x0.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called cs89x0.
+	  To compile this driver as a module, choose M here. The module
+	  will be called cs89x0.
 
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"
@@ -1464,8 +1420,7 @@
 	  card, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eepro100.
 
 
@@ -1492,8 +1447,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e100.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e100.
 
 config LNE390
@@ -1505,8 +1459,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called lne390.
 
 config FEALNX
@@ -1546,8 +1499,7 @@
 	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
 	  Holtek HT80232    Holtek HT80229
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne2k-pci.
 
 config NE3210
@@ -1560,8 +1512,7 @@
 	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
 	  will NOT WORK for NE3200 cards as they are completely different.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne3210.
 
 config ES3210
@@ -1573,8 +1524,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called es3210.
 
 config 8139CP
@@ -1704,8 +1654,7 @@
 	  Compaq NetFlex and Olicom cards.  Please read the file
 	  <file:Documentation/networking/tlan.txt> for more details.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called tlan.
 
 	  Please email feedback to <torben.mathiasen@compaq.com>.
@@ -1995,8 +1944,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e1000.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
 
 config E1000_NAPI
@@ -2041,8 +1989,7 @@
 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e1000e.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.
 
 source "drivers/net/ixp2000/Kconfig"
@@ -2075,8 +2022,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  To compile this driver as a module, choose M here. The module will be
 	  called hamachi.
 
 config YELLOWFIN
@@ -2525,8 +2471,7 @@
 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/ixgbe.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbe.
 
 config IXGB
@@ -2548,8 +2493,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/ixgb.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.
 
 config IXGB_NAPI
@@ -2602,8 +2546,7 @@
 
 	  <http://www.myri.com/scs/download-Myri10GE.html>
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called myri10ge.
 
 config NETXEN_NIC
@@ -2827,10 +2770,9 @@
 	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
 	  your kernel by about 8 KB.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called plip.  If unsure, say Y or M, in case you buy a laptop
-	  later.
+	  To compile this driver as a module, choose M here. The module
+	  will be called plip. If unsure, say Y or M, in case you buy
+	  a laptop later.
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
@@ -2860,8 +2802,7 @@
 	  If you said Y to "Version information on all symbols" above, then
 	  you cannot compile the PPP driver into the kernel; you can then only
 	  compile it as a module. To compile this driver as a module, choose M
-	  here and read <file:Documentation/networking/net-modules.txt>.
-	  The module will be called ppp_generic.
+	  here. The module will be called ppp_generic.
 
 config PPP_MULTILINK
 	bool "PPP multilink support (EXPERIMENTAL)"
@@ -3022,9 +2963,8 @@
 	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
 	  support will enlarge your kernel by about 4 KB. If unsure, say N.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module will be
-	  called slip.
+	  To compile this driver as a module, choose M here. The module
+	  will be called slip.
 
 config SLIP_COMPRESSED
 	bool "CSLIP compressed headers"
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 4030274..3b2f7f1 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -19,8 +19,7 @@
 	  from <http://www.tldp.org/docs.html#howto>(even though ARCnet
 	  is not really Ethernet).
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called arcnet.
 
 if ARCNET
@@ -81,8 +80,7 @@
 	  have always used the old ARCnet driver without knowing what type of
 	  card you had, this is probably the one for you.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com90xx.
 
 config ARCNET_COM90xxIO
@@ -93,8 +91,7 @@
 	  the normal driver. Only use it if your card doesn't support shared
 	  memory.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com90io.
 
 config ARCNET_RIM_I
@@ -105,8 +102,7 @@
 	  driver is completely untested, so if you have one of these cards,
 	  please mail <dwmw2@infradead.org>, especially if it works!
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called arc-rimi.
 
 config ARCNET_COM20020
@@ -116,8 +112,7 @@
 	  things as promiscuous mode, so packet sniffing is possible, and
 	  extra diagnostic information.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com20020.
 
 config ARCNET_COM20020_ISA
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 7f016f3..91a6590 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -417,7 +417,7 @@
 
 	if (status & REG_INTSTS_RX) {
 		spin_lock(&ep->rx_lock);
-		if (likely(__netif_rx_schedule_prep(dev, &ep->napi))) {
+		if (likely(netif_rx_schedule_prep(dev, &ep->napi))) {
 			wrl(ep, REG_INTEN, REG_INTEN_TX);
 			__netif_rx_schedule(dev, &ep->napi);
 		}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6937ef0..423298c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1847,9 +1847,9 @@
 */
 void bond_destroy(struct bonding *bond)
 {
-	unregister_netdevice(bond->dev);
 	bond_deinit(bond->dev);
 	bond_destroy_sysfs_entry(bond);
+	unregister_netdevice(bond->dev);
 }
 
 /*
@@ -4405,6 +4405,7 @@
 	bond_dev->set_multicast_list = bond_set_multicast_list;
 	bond_dev->change_mtu = bond_change_mtu;
 	bond_dev->set_mac_address = bond_set_mac_address;
+	bond_dev->validate_addr = NULL;
 
 	bond_set_mode_ops(bond, bond->params.mode);
 
@@ -4474,8 +4475,8 @@
 		bond_mc_list_destroy(bond);
 		/* Release the bonded slaves */
 		bond_release_all(bond_dev);
-		unregister_netdevice(bond_dev);
 		bond_deinit(bond_dev);
+		unregister_netdevice(bond_dev);
 	}
 
 #ifdef CONFIG_PROC_FS
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 7a06ade..b29330d 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1193,8 +1193,6 @@
 	struct bonding *bond = to_bond(d);
 	int count;
 
-	rtnl_lock();
-
 	read_lock(&bond->curr_slave_lock);
 	curr = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
@@ -1216,7 +1214,9 @@
         struct slave *new_active = NULL;
 	struct bonding *bond = to_bond(d);
 
+	rtnl_lock();
 	write_lock_bh(&bond->lock);
+
 	if (!USES_PRIMARY(bond->params.mode)) {
 		printk(KERN_INFO DRV_NAME
 		       ": %s: Unable to change active slave; %s is in mode %d\n",
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index ffa7e64..4436662 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1379,11 +1379,11 @@
 	}
 	__skb_pull(skb, sizeof(*p));
 
-	skb->dev->last_rx = jiffies;
 	st = per_cpu_ptr(sge->port_stats[p->iff], smp_processor_id());
 	st->rx_packets++;
 
 	skb->protocol = eth_type_trans(skb, adapter->port[p->iff].dev);
+	skb->dev->last_rx = jiffies;
 	if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
 	    skb->protocol == htons(ETH_P_IP) &&
 	    (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index edd6828..917b7b4 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -250,6 +250,7 @@
 #include <asm/system.h>
 #include <asm/ethernet.h>
 #include <asm/cache.h>
+#include <asm/arch/io_interface_mux.h>
 
 //#define ETHDEBUG
 #define D(x)
@@ -279,6 +280,9 @@
 	 * by this lock as well.
 	 */
 	spinlock_t lock;
+
+	spinlock_t led_lock; /* Protect LED state */
+	spinlock_t transceiver_lock; /* Protect transceiver state. */
 };
 
 typedef struct etrax_eth_descr
@@ -295,8 +299,6 @@
 	void (*check_duplex)(struct net_device* dev);
 };
 
-struct transceiver_ops* transceiver;
-
 /* Duplex settings */
 enum duplex
 {
@@ -307,7 +309,7 @@
 
 /* Dma descriptors etc. */
 
-#define MAX_MEDIA_DATA_SIZE 1518
+#define MAX_MEDIA_DATA_SIZE 1522
 
 #define MIN_PACKET_LEN      46
 #define ETHER_HEAD_LEN      14
@@ -332,8 +334,8 @@
 
 /*Intel LXT972A specific*/
 #define MDIO_INT_STATUS_REG_2			0x0011
-#define MDIO_INT_FULL_DUPLEX_IND		( 1 << 9 )
-#define MDIO_INT_SPEED				( 1 << 14 )
+#define MDIO_INT_FULL_DUPLEX_IND       (1 << 9)
+#define MDIO_INT_SPEED                (1 << 14)
 
 /* Network flash constants */
 #define NET_FLASH_TIME                  (HZ/50) /* 20 ms */
@@ -344,8 +346,8 @@
 #define NO_NETWORK_ACTIVITY 0
 #define NETWORK_ACTIVITY    1
 
-#define NBR_OF_RX_DESC     64
-#define NBR_OF_TX_DESC     256
+#define NBR_OF_RX_DESC     32
+#define NBR_OF_TX_DESC     16
 
 /* Large packets are sent directly to upper layers while small packets are */
 /* copied (to reduce memory waste). The following constant decides the breakpoint */
@@ -367,7 +369,6 @@
 static etrax_eth_descr *myNextRxDesc;  /* Points to the next descriptor to
                                           to be processed */
 static etrax_eth_descr *myLastRxDesc;  /* The last processed descriptor */
-static etrax_eth_descr *myPrevRxDesc;  /* The descriptor right before myNextRxDesc */
 
 static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
 
@@ -377,7 +378,6 @@
 static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
 
 static unsigned int network_rec_config_shadow = 0;
-static unsigned int mdio_phy_addr; /* Transciever address */
 
 static unsigned int network_tr_ctrl_shadow = 0;
 
@@ -411,7 +411,7 @@
 static void e100_tx_timeout(struct net_device *dev);
 static struct net_device_stats *e100_get_stats(struct net_device *dev);
 static void set_multicast_list(struct net_device *dev);
-static void e100_hardware_send_packet(char *buf, int length);
+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
 static void update_rx_stats(struct net_device_stats *);
 static void update_tx_stats(struct net_device_stats *);
 static int e100_probe_transceiver(struct net_device* dev);
@@ -434,7 +434,10 @@
 static void e100_set_network_leds(int active);
 
 static const struct ethtool_ops e100_ethtool_ops;
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void dummy_check_speed(struct net_device* dev);
+static void dummy_check_duplex(struct net_device* dev);
+#else
 static void broadcom_check_speed(struct net_device* dev);
 static void broadcom_check_duplex(struct net_device* dev);
 static void tdk_check_speed(struct net_device* dev);
@@ -443,16 +446,28 @@
 static void intel_check_duplex(struct net_device* dev);
 static void generic_check_speed(struct net_device* dev);
 static void generic_check_duplex(struct net_device* dev);
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device* dev);
+#endif
+
+static int autoneg_normal = 1;
 
 struct transceiver_ops transceivers[] =
 {
+#if defined(CONFIG_ETRAX_NO_PHY)
+	{0x0000, dummy_check_speed, dummy_check_duplex}        /* Dummy */
+#else
 	{0x1018, broadcom_check_speed, broadcom_check_duplex},  /* Broadcom */
 	{0xC039, tdk_check_speed, tdk_check_duplex},            /* TDK 2120 */
 	{0x039C, tdk_check_speed, tdk_check_duplex},            /* TDK 2120C */
         {0x04de, intel_check_speed, intel_check_duplex},     	/* Intel LXT972A*/
 	{0x0000, generic_check_speed, generic_check_duplex}     /* Generic, must be last */
+#endif
 };
 
+struct transceiver_ops* transceiver = &transceivers[0];
+
 #define tx_done(dev) (*R_DMA_CH0_CMD == 0)
 
 /*
@@ -471,14 +486,22 @@
 	int i, err;
 
 	printk(KERN_INFO
-	       "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n");
+	       "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2007 Axis Communications AB\n");
+
+	if (cris_request_io_interface(if_eth, cardname)) {
+		printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
+		return -EBUSY;
+	}
 
 	dev = alloc_etherdev(sizeof(struct net_local));
-	np = dev->priv;
-
 	if (!dev)
 		return -ENOMEM;
 
+	np = netdev_priv(dev);
+
+	/* we do our own locking */
+	dev->features |= NETIF_F_LLTX;
+
 	dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
 
 	/* now setup our etrax specific stuff */
@@ -498,14 +521,22 @@
 	dev->do_ioctl           = e100_ioctl;
 	dev->set_config		= e100_set_config;
 	dev->tx_timeout         = e100_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = e100_netpoll;
+#endif
+
+	spin_lock_init(&np->lock);
+	spin_lock_init(&np->led_lock);
+	spin_lock_init(&np->transceiver_lock);
 
 	/* Initialise the list of Etrax DMA-descriptors */
 
 	/* Initialise receive descriptors */
 
 	for (i = 0; i < NBR_OF_RX_DESC; i++) {
-		/* Allocate two extra cachelines to make sure that buffer used by DMA
-		 * does not share cacheline with any other data (to avoid cache bug)
+		/* Allocate two extra cachelines to make sure that buffer used
+		 * by DMA does not share cacheline with any other data (to
+		 * avoid cache bug)
 		 */
 		RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
 		if (!RxDescList[i].skb)
@@ -541,7 +572,6 @@
 
 	myNextRxDesc  = &RxDescList[0];
 	myLastRxDesc  = &RxDescList[NBR_OF_RX_DESC - 1];
-	myPrevRxDesc  = &RxDescList[NBR_OF_RX_DESC - 1];
 	myFirstTxDesc = &TxDescList[0];
 	myNextTxDesc  = &TxDescList[0];
 	myLastTxDesc  = &TxDescList[NBR_OF_TX_DESC - 1];
@@ -562,10 +592,11 @@
 	current_speed = 10;
 	current_speed_selection = 0; /* Auto */
 	speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-        duplex_timer.data = (unsigned long)dev;
+	speed_timer.data = (unsigned long)dev;
 	speed_timer.function = e100_check_speed;
 
 	clear_led_timer.function = e100_clear_network_leds;
+	clear_led_timer.data = (unsigned long)dev;
 
 	full_duplex = 0;
 	current_duplex = autoneg;
@@ -574,7 +605,6 @@
 	duplex_timer.function = e100_check_duplex;
 
         /* Initialize mii interface */
-	np->mii_if.phy_id = mdio_phy_addr;
 	np->mii_if.phy_id_mask = 0x1f;
 	np->mii_if.reg_num_mask = 0x1f;
 	np->mii_if.dev = dev;
@@ -585,6 +615,9 @@
 	/* unwanted addresses are matched */
 	*R_NETWORK_GA_0 = 0x00000000;
 	*R_NETWORK_GA_1 = 0x00000000;
+
+	/* Initialize next time the led can flash */
+	led_next_time = jiffies;
 	return 0;
 }
 
@@ -595,9 +628,9 @@
 static int
 e100_set_mac_address(struct net_device *dev, void *p)
 {
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 	struct sockaddr *addr = p;
-	int i;
+	DECLARE_MAC_BUF(mac);
 
 	spin_lock(&np->lock); /* preemption protection */
 
@@ -686,6 +719,25 @@
 		goto grace_exit2;
 	}
 
+	/*
+	 * Always allocate the DMA channels after the IRQ,
+	 * and clean up on failure.
+	 */
+
+	if (cris_request_dma(NETWORK_TX_DMA_NBR,
+	                     cardname,
+	                     DMA_VERBOSE_ON_ERROR,
+	                     dma_eth)) {
+		goto grace_exit3;
+        }
+
+	if (cris_request_dma(NETWORK_RX_DMA_NBR,
+	                     cardname,
+	                     DMA_VERBOSE_ON_ERROR,
+	                     dma_eth)) {
+		goto grace_exit4;
+        }
+
 	/* give the HW an idea of what MAC address we want */
 
 	*R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
@@ -700,6 +752,7 @@
 
 	*R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
 #else
+	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
 	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
 	SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
 	SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
@@ -719,8 +772,7 @@
 	SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
 	*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 
 	/* enable the irq's for ethernet DMA */
 
@@ -752,12 +804,13 @@
 
 	*R_DMA_CH0_FIRST = 0;
 	*R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
+	netif_start_queue(dev);
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 
 	/* Probe for transceiver */
 	if (e100_probe_transceiver(dev))
-		goto grace_exit3;
+		goto grace_exit5;
 
 	/* Start duplex/speed timers */
 	add_timer(&speed_timer);
@@ -766,10 +819,14 @@
 	/* We are now ready to accept transmit requeusts from
 	 * the queueing layer of the networking.
 	 */
-	netif_start_queue(dev);
+	netif_carrier_on(dev);
 
 	return 0;
 
+grace_exit5:
+	cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+grace_exit4:
+	cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
 grace_exit3:
 	free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
 grace_exit2:
@@ -780,12 +837,20 @@
 	return -EAGAIN;
 }
 
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_speed(struct net_device* dev)
+{
+	current_speed = 100;
+}
+#else
 static void
 generic_check_speed(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
 	if ((data & ADVERTISE_100FULL) ||
 	    (data & ADVERTISE_100HALF))
 		current_speed = 100;
@@ -797,7 +862,10 @@
 tdk_check_speed(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_TDK_DIAGNOSTIC_REG);
 	current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
 }
 
@@ -805,7 +873,10 @@
 broadcom_check_speed(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_AUX_CTRL_STATUS_REG);
 	current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
 }
 
@@ -813,46 +884,62 @@
 intel_check_speed(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_INT_STATUS_REG_2);
 	current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
 }
-
+#endif
 static void
 e100_check_speed(unsigned long priv)
 {
 	struct net_device* dev = (struct net_device*)priv;
+	struct net_local *np = netdev_priv(dev);
 	static int led_initiated = 0;
 	unsigned long data;
 	int old_speed = current_speed;
 
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR);
+	spin_lock(&np->transceiver_lock);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
 	if (!(data & BMSR_LSTATUS)) {
 		current_speed = 0;
 	} else {
 		transceiver->check_speed(dev);
 	}
 
+	spin_lock(&np->led_lock);
 	if ((old_speed != current_speed) || !led_initiated) {
 		led_initiated = 1;
 		e100_set_network_leds(NO_NETWORK_ACTIVITY);
+		if (current_speed)
+			netif_carrier_on(dev);
+		else
+			netif_carrier_off(dev);
 	}
+	spin_unlock(&np->led_lock);
 
 	/* Reinitialize the timer. */
 	speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
 	add_timer(&speed_timer);
+
+	spin_unlock(&np->transceiver_lock);
 }
 
 static void
 e100_negotiate(struct net_device* dev)
 {
-	unsigned short data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
+	struct net_local *np = netdev_priv(dev);
+	unsigned short data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+						MII_ADVERTISE);
 
 	/* Discard old speed and duplex settings */
 	data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL |
 	          ADVERTISE_10HALF | ADVERTISE_10FULL);
 
 	switch (current_speed_selection) {
-		case 10 :
+		case 10:
 			if (current_duplex == full)
 				data |= ADVERTISE_10FULL;
 			else if (current_duplex == half)
@@ -861,7 +948,7 @@
 				data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
 			break;
 
-		case 100 :
+		case 100:
 			 if (current_duplex == full)
 				data |= ADVERTISE_100FULL;
 			else if (current_duplex == half)
@@ -870,7 +957,7 @@
 				data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
 			break;
 
-		case 0 : /* Auto */
+		case 0: /* Auto */
 			 if (current_duplex == full)
 				data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
 			else if (current_duplex == half)
@@ -880,35 +967,44 @@
 				  ADVERTISE_100HALF | ADVERTISE_100FULL;
 			break;
 
-		default : /* assume autoneg speed and duplex */
+		default: /* assume autoneg speed and duplex */
 			data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
 				  ADVERTISE_100HALF | ADVERTISE_100FULL;
+			break;
 	}
 
-	e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data);
+	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
 
 	/* Renegotiate with link partner */
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
+	if (autoneg_normal) {
+	  data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
 	data |= BMCR_ANENABLE | BMCR_ANRESTART;
-
-	e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data);
+	}
+	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
 }
 
 static void
 e100_set_speed(struct net_device* dev, unsigned long speed)
 {
+	struct net_local *np = netdev_priv(dev);
+
+	spin_lock(&np->transceiver_lock);
 	if (speed != current_speed_selection) {
 		current_speed_selection = speed;
 		e100_negotiate(dev);
 	}
+	spin_unlock(&np->transceiver_lock);
 }
 
 static void
 e100_check_duplex(unsigned long priv)
 {
 	struct net_device *dev = (struct net_device *)priv;
-	struct net_local *np = (struct net_local *)dev->priv;
-	int old_duplex = full_duplex;
+	struct net_local *np = netdev_priv(dev);
+	int old_duplex;
+
+	spin_lock(&np->transceiver_lock);
+	old_duplex = full_duplex;
 	transceiver->check_duplex(dev);
 	if (old_duplex != full_duplex) {
 		/* Duplex changed */
@@ -920,13 +1016,22 @@
 	duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
 	add_timer(&duplex_timer);
 	np->mii_if.full_duplex = full_duplex;
+	spin_unlock(&np->transceiver_lock);
 }
-
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_duplex(struct net_device* dev)
+{
+	full_duplex = 1;
+}
+#else
 static void
 generic_check_duplex(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
 	if ((data & ADVERTISE_10FULL) ||
 	    (data & ADVERTISE_100FULL))
 		full_duplex = 1;
@@ -938,7 +1043,10 @@
 tdk_check_duplex(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_TDK_DIAGNOSTIC_REG);
 	full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
 }
 
@@ -946,7 +1054,10 @@
 broadcom_check_duplex(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_AUX_CTRL_STATUS_REG);
 	full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
 }
 
@@ -954,38 +1065,55 @@
 intel_check_duplex(struct net_device* dev)
 {
 	unsigned long data;
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
+	struct net_local *np = netdev_priv(dev);
+
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+				 MDIO_INT_STATUS_REG_2);
 	full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
 }
-
+#endif
 static void
 e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
 {
+	struct net_local *np = netdev_priv(dev);
+
+	spin_lock(&np->transceiver_lock);
 	if (new_duplex != current_duplex) {
 		current_duplex = new_duplex;
 		e100_negotiate(dev);
 	}
+	spin_unlock(&np->transceiver_lock);
 }
 
 static int
 e100_probe_transceiver(struct net_device* dev)
 {
+	int ret = 0;
+
+#if !defined(CONFIG_ETRAX_NO_PHY)
 	unsigned int phyid_high;
 	unsigned int phyid_low;
 	unsigned int oui;
 	struct transceiver_ops* ops = NULL;
+	struct net_local *np = netdev_priv(dev);
+
+	spin_lock(&np->transceiver_lock);
 
 	/* Probe MDIO physical address */
-	for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) {
-		if (e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR) != 0xffff)
+	for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31;
+	     np->mii_if.phy_id++) {
+		if (e100_get_mdio_reg(dev,
+				      np->mii_if.phy_id, MII_BMSR) != 0xffff)
 			break;
 	}
-	if (mdio_phy_addr == 32)
-		 return -ENODEV;
+	if (np->mii_if.phy_id == 32) {
+		ret = -ENODEV;
+		goto out;
+	}
 
 	/* Get manufacturer */
-	phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1);
-	phyid_low = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID2);
+	phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1);
+	phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2);
 	oui = (phyid_high << 6) | (phyid_low >> 10);
 
 	for (ops = &transceivers[0]; ops->oui; ops++) {
@@ -993,8 +1121,10 @@
 			break;
 	}
 	transceiver = ops;
-
-	return 0;
+out:
+	spin_unlock(&np->transceiver_lock);
+#endif
+	return ret;
 }
 
 static int
@@ -1088,13 +1218,14 @@
 static void
 e100_reset_transceiver(struct net_device* dev)
 {
+	struct net_local *np = netdev_priv(dev);
 	unsigned short cmd;
 	unsigned short data;
 	int bitCounter;
 
-	data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
 
-	cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (mdio_phy_addr << 7) | (MII_BMCR << 2);
+	cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (np->mii_if.phy_id << 7) | (MII_BMCR << 2);
 
 	e100_send_mdio_cmd(cmd, 1);
 
@@ -1112,7 +1243,7 @@
 static void
 e100_tx_timeout(struct net_device *dev)
 {
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&np->lock, flags);
@@ -1134,8 +1265,7 @@
 	e100_reset_transceiver(dev);
 
 	/* and get rid of the packets that never got an interrupt */
-	while (myFirstTxDesc != myNextTxDesc)
-	{
+	while (myFirstTxDesc != myNextTxDesc) {
 		dev_kfree_skb(myFirstTxDesc->skb);
 		myFirstTxDesc->skb = 0;
 		myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
@@ -1161,7 +1291,7 @@
 static int
 e100_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 	unsigned char *buf = skb->data;
 	unsigned long flags;
 
@@ -1174,7 +1304,7 @@
 
 	dev->trans_start = jiffies;
 
-	e100_hardware_send_packet(buf, skb->len);
+	e100_hardware_send_packet(np, buf, skb->len);
 
 	myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
 
@@ -1197,13 +1327,15 @@
 e100rxtx_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct net_local *np = (struct net_local *)dev->priv;
-	unsigned long irqbits = *R_IRQ_MASK2_RD;
+	struct net_local *np = netdev_priv(dev);
+	unsigned long irqbits;
 
-	/* Disable RX/TX IRQs to avoid reentrancy */
-	*R_IRQ_MASK2_CLR =
-	  IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-	  IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
+	/*
+	 * Note that both rx and tx interrupts are blocked at this point,
+	 * regardless of which got us here.
+	 */
+
+	irqbits = *R_IRQ_MASK2_RD;
 
 	/* Handle received packets */
 	if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
@@ -1219,7 +1351,7 @@
 			 * allocate a new buffer to put a packet in.
 			 */
 			e100_rx(dev);
-			((struct net_local *)dev->priv)->stats.rx_packets++;
+			np->stats.rx_packets++;
 			/* restart/continue on the channel, for safety */
 			*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
 			/* clear dma channel 1 eop/descr irq bits */
@@ -1233,9 +1365,8 @@
 	}
 
 	/* Report any packets that have been sent */
-	while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) &&
-	       myFirstTxDesc != myNextTxDesc)
-	{
+	while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST &&
+	       (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
 		np->stats.tx_bytes += myFirstTxDesc->skb->len;
 		np->stats.tx_packets++;
 
@@ -1244,18 +1375,14 @@
 		dev_kfree_skb_irq(myFirstTxDesc->skb);
 		myFirstTxDesc->skb = 0;
 		myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-	}
-
-	if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
-		/* acknowledge the eop interrupt and wake up queue */
-		*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
+                /* Wake up queue. */
 		netif_wake_queue(dev);
 	}
 
-	/* Enable RX/TX IRQs again */
-	*R_IRQ_MASK2_SET =
-	  IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
-	  IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
+	if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
+		/* acknowledge the eop interrupt. */
+		*R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -1264,7 +1391,7 @@
 e100nw_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 	unsigned long irqbits = *R_IRQ_MASK0_RD;
 
 	/* check for underrun irq */
@@ -1286,7 +1413,6 @@
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
 		*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-		*R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr);
 		np->stats.tx_errors++;
 		D(printk("ethernet excessive collisions!\n"));
 	}
@@ -1299,12 +1425,13 @@
 {
 	struct sk_buff *skb;
 	int length = 0;
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 	unsigned char *skb_data_ptr;
 #ifdef ETHDEBUG
 	int i;
 #endif
-
+	etrax_eth_descr *prevRxDesc;  /* The descriptor right before myNextRxDesc */
+	spin_lock(&np->led_lock);
 	if (!led_active && time_after(jiffies, led_next_time)) {
 		/* light the network leds depending on the current speed. */
 		e100_set_network_leds(NETWORK_ACTIVITY);
@@ -1314,9 +1441,10 @@
 		led_active = 1;
 		mod_timer(&clear_led_timer, jiffies + HZ/10);
 	}
+	spin_unlock(&np->led_lock);
 
 	length = myNextRxDesc->descr.hw_len - 4;
-	((struct net_local *)dev->priv)->stats.rx_bytes += length;
+	np->stats.rx_bytes += length;
 
 #ifdef ETHDEBUG
 	printk("Got a packet of length %d:\n", length);
@@ -1336,7 +1464,7 @@
 		if (!skb) {
 			np->stats.rx_errors++;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-			return;
+			goto update_nextrxdesc;
 		}
 
 		skb_put(skb, length - ETHER_HEAD_LEN);        /* allocate room for the packet body */
@@ -1354,15 +1482,15 @@
 	else {
 		/* Large packet, send directly to upper layers and allocate new
 		 * memory (aligned to cache line boundary to avoid bug).
-		 * Before sending the skb to upper layers we must make sure that
-		 * skb->data points to the aligned start of the packet.
+		 * Before sending the skb to upper layers we must make sure
+		 * that skb->data points to the aligned start of the packet.
 		 */
 		int align;
 		struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
 		if (!new_skb) {
 			np->stats.rx_errors++;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-			return;
+			goto update_nextrxdesc;
 		}
 		skb = myNextRxDesc->skb;
 		align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
@@ -1377,9 +1505,10 @@
 	/* Send the packet to the upper layers */
 	netif_rx(skb);
 
+  update_nextrxdesc:
 	/* Prepare for next packet */
 	myNextRxDesc->descr.status = 0;
-	myPrevRxDesc = myNextRxDesc;
+	prevRxDesc = myNextRxDesc;
 	myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
 
 	rx_queue_len++;
@@ -1387,9 +1516,9 @@
 	/* Check if descriptors should be returned */
 	if (rx_queue_len == RX_QUEUE_THRESHOLD) {
 		flush_etrax_cache();
-		myPrevRxDesc->descr.ctrl |= d_eol;
+		prevRxDesc->descr.ctrl |= d_eol;
 		myLastRxDesc->descr.ctrl &= ~d_eol;
-		myLastRxDesc = myPrevRxDesc;
+		myLastRxDesc = prevRxDesc;
 		rx_queue_len = 0;
 	}
 }
@@ -1398,7 +1527,7 @@
 static int
 e100_close(struct net_device *dev)
 {
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
 
 	printk(KERN_INFO "Closing %s.\n", dev->name);
 
@@ -1426,6 +1555,9 @@
 	free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
 	free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
 
+	cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
+	cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+
 	/* Update the statistics here. */
 
 	update_rx_stats(&np->stats);
@@ -1443,18 +1575,11 @@
 {
 	struct mii_ioctl_data *data = if_mii(ifr);
 	struct net_local *np = netdev_priv(dev);
+	int rc = 0;
+        int old_autoneg;
 
 	spin_lock(&np->lock); /* Preempt protection */
 	switch (cmd) {
-		case SIOCGMIIPHY: /* Get PHY address */
-			data->phy_id = mdio_phy_addr;
-			break;
-		case SIOCGMIIREG: /* Read MII register */
-			data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num);
-			break;
-		case SIOCSMIIREG: /* Write MII register */
-			e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in);
-			break;
 		/* The ioctls below should be considered obsolete but are */
 		/* still present for compatability with old scripts/apps  */
 		case SET_ETH_SPEED_10:                  /* 10 Mbps */
@@ -1463,60 +1588,47 @@
 		case SET_ETH_SPEED_100:                /* 100 Mbps */
 			e100_set_speed(dev, 100);
 			break;
-		case SET_ETH_SPEED_AUTO:              /* Auto negotiate speed */
+		case SET_ETH_SPEED_AUTO:        /* Auto-negotiate speed */
 			e100_set_speed(dev, 0);
 			break;
-		case SET_ETH_DUPLEX_HALF:              /* Half duplex. */
+		case SET_ETH_DUPLEX_HALF:       /* Half duplex */
 			e100_set_duplex(dev, half);
 			break;
-		case SET_ETH_DUPLEX_FULL:              /* Full duplex. */
+		case SET_ETH_DUPLEX_FULL:       /* Full duplex */
 			e100_set_duplex(dev, full);
 			break;
-		case SET_ETH_DUPLEX_AUTO:             /* Autonegotiate duplex*/
+		case SET_ETH_DUPLEX_AUTO:       /* Auto-negotiate duplex */
 			e100_set_duplex(dev, autoneg);
 			break;
+	        case SET_ETH_AUTONEG:
+			old_autoneg = autoneg_normal;
+		        autoneg_normal = *(int*)data;
+			if (autoneg_normal != old_autoneg)
+				e100_negotiate(dev);
+			break;
 		default:
-			return -EINVAL;
+			rc = generic_mii_ioctl(&np->mii_if, if_mii(ifr),
+						cmd, NULL);
+			break;
 	}
 	spin_unlock(&np->lock);
-	return 0;
+	return rc;
 }
 
-static int e100_set_settings(struct net_device *dev,
-			     struct ethtool_cmd *ecmd)
+static int e100_get_settings(struct net_device *dev,
+			     struct ethtool_cmd *cmd)
 {
-	ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-			  SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-			  SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-	ecmd->port = PORT_TP;
-	ecmd->transceiver = XCVR_EXTERNAL;
-	ecmd->phy_address = mdio_phy_addr;
-	ecmd->speed = current_speed;
-	ecmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-	ecmd->advertising = ADVERTISED_TP;
+	struct net_local *np = netdev_priv(dev);
+	int err;
 
-	if (current_duplex == autoneg && current_speed_selection == 0)
-		ecmd->advertising |= ADVERTISED_Autoneg;
-	else {
-		ecmd->advertising |=
-			ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-			ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
-		if (current_speed_selection == 10)
-			ecmd->advertising &= ~(ADVERTISED_100baseT_Half |
-					       ADVERTISED_100baseT_Full);
-		else if (current_speed_selection == 100)
-			ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
-					       ADVERTISED_10baseT_Full);
-		if (current_duplex == half)
-			ecmd->advertising &= ~(ADVERTISED_10baseT_Full |
-					       ADVERTISED_100baseT_Full);
-		else if (current_duplex == full)
-			ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
-					       ADVERTISED_100baseT_Half);
-	}
+	spin_lock_irq(&np->lock);
+	err = mii_ethtool_gset(&np->mii_if, cmd);
+	spin_unlock_irq(&np->lock);
 
-	ecmd->autoneg = AUTONEG_ENABLE;
-	return 0;
+	/* The PHY may support 1000baseT, but the Etrax100 does not.  */
+	cmd->supported &= ~(SUPPORTED_1000baseT_Half
+			    | SUPPORTED_1000baseT_Full);
+	return err;
 }
 
 static int e100_set_settings(struct net_device *dev,
@@ -1560,7 +1672,8 @@
 static int
 e100_set_config(struct net_device *dev, struct ifmap *map)
 {
-	struct net_local *np = (struct net_local *)dev->priv;
+	struct net_local *np = netdev_priv(dev);
+
 	spin_lock(&np->lock); /* Preempt protection */
 
 	switch(map->port) {
@@ -1612,7 +1725,6 @@
 	es->collisions +=
 		IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
 		IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
-	es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r);
 }
 
 /*
@@ -1622,8 +1734,9 @@
 static struct net_device_stats *
 e100_get_stats(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *)dev->priv;
+	struct net_local *lp = netdev_priv(dev);
 	unsigned long flags;
+
 	spin_lock_irqsave(&lp->lock, flags);
 
 	update_rx_stats(&lp->stats);
@@ -1643,13 +1756,13 @@
 static void
 set_multicast_list(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *)dev->priv;
+	struct net_local *lp = netdev_priv(dev);
 	int num_addr = dev->mc_count;
 	unsigned long int lo_bits;
 	unsigned long int hi_bits;
+
 	spin_lock(&lp->lock);
-	if (dev->flags & IFF_PROMISC)
-	{
+	if (dev->flags & IFF_PROMISC) {
 		/* promiscuous mode */
 		lo_bits = 0xfffffffful;
 		hi_bits = 0xfffffffful;
@@ -1679,9 +1792,10 @@
 		struct dev_mc_list *dmi = dev->mc_list;
 		int i;
 		char *baddr;
+
 		lo_bits = 0x00000000ul;
 		hi_bits = 0x00000000ul;
-		for (i=0; i<num_addr; i++) {
+		for (i = 0; i < num_addr; i++) {
 			/* Calculate the hash index for the GA registers */
 
 			hash_ix = 0;
@@ -1708,8 +1822,7 @@
 
 			if (hash_ix >= 32) {
 				hi_bits |= (1 << (hash_ix-32));
-			}
-			else {
+			} else {
 				lo_bits |= (1 << hash_ix);
 			}
 			dmi = dmi->next;
@@ -1724,10 +1837,11 @@
 }
 
 void
-e100_hardware_send_packet(char *buf, int length)
+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
 {
 	D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
 
+	spin_lock(&np->led_lock);
 	if (!led_active && time_after(jiffies, led_next_time)) {
 		/* light the network leds depending on the current speed. */
 		e100_set_network_leds(NETWORK_ACTIVITY);
@@ -1737,6 +1851,7 @@
 		led_active = 1;
 		mod_timer(&clear_led_timer, jiffies + HZ/10);
 	}
+	spin_unlock(&np->led_lock);
 
 	/* configure the tx dma descriptor */
 	myNextTxDesc->descr.sw_len = length;
@@ -1754,6 +1869,11 @@
 static void
 e100_clear_network_leds(unsigned long dummy)
 {
+	struct net_device *dev = (struct net_device *)dummy;
+	struct net_local *np = netdev_priv(dev);
+
+	spin_lock(&np->led_lock);
+
 	if (led_active && time_after(jiffies, led_next_time)) {
 		e100_set_network_leds(NO_NETWORK_ACTIVITY);
 
@@ -1761,6 +1881,8 @@
 		led_next_time = jiffies + NET_FLASH_PAUSE;
 		led_active = 0;
 	}
+
+	spin_unlock(&np->led_lock);
 }
 
 static void
@@ -1781,19 +1903,25 @@
 #else
 		LED_NETWORK_SET(LED_OFF);
 #endif
-	}
-	else if (light_leds) {
+	} else if (light_leds) {
 		if (current_speed == 10) {
 			LED_NETWORK_SET(LED_ORANGE);
 		} else {
 			LED_NETWORK_SET(LED_GREEN);
 		}
-	}
-	else {
+	} else {
 		LED_NETWORK_SET(LED_OFF);
 	}
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+e100_netpoll(struct net_device* netdev)
+{
+	e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
+}
+#endif
+
 static int
 etrax_init_module(void)
 {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 72deff0..cf39473 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4804,6 +4804,7 @@
 			spin_unlock_irqrestore(&adapter->stats_lock, flags);
 			return -EIO;
 		}
+		spin_unlock_irqrestore(&adapter->stats_lock, flags);
 		if (adapter->hw.media_type == e1000_media_type_copper) {
 			switch (data->reg_num) {
 			case PHY_CTRL:
@@ -4824,12 +4825,8 @@
 						   DUPLEX_HALF;
 					retval = e1000_set_spd_dplx(adapter,
 								    spddplx);
-					if (retval) {
-						spin_unlock_irqrestore(
-							&adapter->stats_lock,
-							flags);
+					if (retval)
 						return retval;
-					}
 				}
 				if (netif_running(adapter->netdev))
 					e1000_reinit_locked(adapter);
@@ -4838,11 +4835,8 @@
 				break;
 			case M88E1000_PHY_SPEC_CTRL:
 			case M88E1000_EXT_PHY_SPEC_CTRL:
-				if (e1000_phy_reset(&adapter->hw)) {
-					spin_unlock_irqrestore(
-						&adapter->stats_lock, flags);
+				if (e1000_phy_reset(&adapter->hw))
 					return -EIO;
-				}
 				break;
 			}
 		} else {
@@ -4857,7 +4851,6 @@
 				break;
 			}
 		}
-		spin_unlock_irqrestore(&adapter->stats_lock, flags);
 		break;
 	default:
 		return -EOPNOTSUPP;
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
index 2765e49..562ea68 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/fs_enet/Kconfig
@@ -2,6 +2,7 @@
        tristate "Freescale Ethernet Driver"
        depends on CPM1 || CPM2
        select MII
+       select PHYLIB
 
 config FS_ENET_HAS_SCC
 	bool "Chip has an SCC usable for ethernet"
@@ -11,11 +12,19 @@
 config FS_ENET_HAS_FCC
 	bool "Chip has an FCC usable for ethernet"
 	depends on FS_ENET && CPM2
-	select MDIO_BITBANG
 	default y
 
 config FS_ENET_HAS_FEC
 	bool "Chip has an FEC usable for ethernet"
 	depends on FS_ENET && CPM1
+	select FS_ENET_MDIO_FEC
 	default y
 
+config FS_ENET_MDIO_FEC
+	tristate "MDIO driver for FEC"
+	depends on FS_ENET && CPM1
+
+config FS_ENET_MDIO_FCC
+	tristate "MDIO driver for FCC"
+	depends on FS_ENET && CPM2
+	select MDIO_BITBANG
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
index 02d4dc1..1ffbe07 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/fs_enet/Makefile
@@ -4,7 +4,16 @@
 
 obj-$(CONFIG_FS_ENET) += fs_enet.o
 
-obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o mii-fec.o
-obj-$(CONFIG_CPM2) += mac-fcc.o mii-bitbang.o
+fs_enet-$(CONFIG_FS_ENET_HAS_SCC) += mac-scc.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FEC) += mac-fec.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FCC) += mac-fcc.o
 
-fs_enet-objs := fs_enet-main.o
+ifeq ($(CONFIG_PPC_CPM_NEW_BINDING),y)
+obj-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+obj-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+else
+fs_enet-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+fs_enet-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+endif
+
+fs_enet-objs := fs_enet-main.o $(fs_enet-m)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e0119f6..580cb4a 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -762,26 +762,20 @@
 
 		if (copy_from_user(&addr,
 		                   (void __user *) arg, AX25_ADDR_LEN)) {
-			err = -EFAULT;
+				err = -EFAULT;
+				break;
+			}
+
+			netif_tx_lock_bh(dev);
+			memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN);
+			netif_tx_unlock_bh(dev);
+
+			err = 0;
 			break;
 		}
 
-		netif_tx_lock_bh(dev);
-		memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN);
-		netif_tx_unlock_bh(dev);
-
-		err = 0;
-		break;
-	}
-
-	/* Allow stty to read, but not set, the serial port */
-	case TCGETS:
-	case TCGETA:
-		err = n_tty_ioctl(tty, (struct file *) file, cmd, arg);
-		break;
-
 	default:
-		err = -ENOIOCTLCMD;
+		err = tty_mode_ioctl(tty, file, cmd, arg);
 	}
 
 	sp_put(sp);
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 2c6f7be..fc753d7 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -434,11 +434,6 @@
 	IRDA_ASSERT(dev != NULL, return -1;);
 
 	switch (cmd) {
-	case TCGETS:
-	case TCGETA:
-		err = n_tty_ioctl(tty, file, cmd, arg);
-		break;
-
 	case IRTTY_IOCTDONGLE:
 		/* this call blocks for completion */
 		err = sirdev_set_dongle(dev, (IRDA_DONGLE) arg);
@@ -454,7 +449,7 @@
 			err = -EFAULT;
 		break;
 	default:
-		err = -ENOIOCTLCMD;
+		err = tty_mode_ioctl(tty, file, cmd, arg);
 		break;
 	}
 	return err;
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 45f30a2..662b8d1 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -284,7 +284,7 @@
 	unregister_netdev(dev);
 }
 
-static struct pernet_operations loopback_net_ops = {
+static struct pernet_operations __net_initdata loopback_net_ops = {
        .init = loopback_net_init,
        .exit = loopback_net_exit,
 };
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index f8d63d3..b226e01 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -171,9 +171,10 @@
 				  buf->u.direct.map);
 	else {
 		for (i = 0; i < buf->nbufs; ++i)
-			dma_free_coherent(&dev->pdev->dev, PAGE_SIZE,
-					  buf->u.page_list[i].buf,
-					  buf->u.page_list[i].map);
+			if (buf->u.page_list[i].buf)
+				dma_free_coherent(&dev->pdev->dev, PAGE_SIZE,
+						  buf->u.page_list[i].buf,
+						  buf->u.page_list[i].map);
 		kfree(buf->u.page_list);
 	}
 }
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index cc4b1be..42b4763 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -240,7 +240,7 @@
 	mlx4_table_put(dev, &qp_table->auxc_table, qp->qpn);
 	mlx4_table_put(dev, &qp_table->qp_table, qp->qpn);
 
-	if (qp->qpn < dev->caps.sqp_start + 8)
+	if (qp->qpn >= dev->caps.sqp_start + 8)
 		mlx4_bitmap_free(&qp_table->bitmap, qp->qpn);
 }
 EXPORT_SYMBOL_GPL(mlx4_qp_free);
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 8d29319..656a260 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -134,7 +134,7 @@
 
 	myri_disable_irq(mp->lregs, cregs);
 
-	while (tick++ <= 25) {
+	while (tick++ < 25) {
 		u32 softstate;
 
 		/* Wake it up. */
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index eb0aff7..5267e03 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -128,8 +128,8 @@
 	           FIFO_PTR_FRAMELEN(len));
 
 	ndev->trans_start = jiffies;
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += skb->len;
 
 	netif_stop_queue(ndev);
 	spin_unlock_irq(&priv->lock);
@@ -155,7 +155,7 @@
 	if (unlikely(skb == NULL)) {
 		printk(KERN_NOTICE "%s: Low memory, packet dropped.\n",
 			ndev->name);
-		dev->stats.rx_dropped++;
+		ndev->stats.rx_dropped++;
 		return;
 	}
 
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index ab4d309..09b4fde 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -580,6 +580,16 @@
 
 		len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
 
+		pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE);
+
+		if (macrx & XCT_MACRX_CRC) {
+			/* CRC error flagged */
+			mac->netdev->stats.rx_errors++;
+			mac->netdev->stats.rx_crc_errors++;
+			dev_kfree_skb_irq(skb);
+			goto next;
+		}
+
 		if (len < 256) {
 			struct sk_buff *new_skb;
 
@@ -595,11 +605,10 @@
 		} else
 			info->skb = NULL;
 
-		pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE);
-
 		info->dma = 0;
 
-		skb_put(skb, len);
+		/* Don't include CRC */
+		skb_put(skb, len-4);
 
 		if (likely((macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK)) {
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -614,6 +623,7 @@
 		skb->protocol = eth_type_trans(skb, mac->netdev);
 		netif_receive_skb(skb);
 
+next:
 		RX_RING(mac, n) = 0;
 		RX_RING(mac, n+1) = 0;
 
@@ -1126,7 +1136,7 @@
 	unsigned long flags;
 	int i, nfrags;
 
-	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_SS | XCT_MACTX_CRC_PAD;
+	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		const unsigned char *nh = skb_network_header(skb);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index d2ede5f..035fd41 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -265,7 +265,7 @@
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
-		.driver = {.owner = THIS_MODULE,},
+		.driver = { .owner = THIS_MODULE },
 	},
 	{
 		.phy_id = 0x01410c90,
@@ -278,7 +278,7 @@
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
-		.driver = {.owner = THIS_MODULE,},
+		.driver = { .owner = THIS_MODULE },
 	},
 	{
 		.phy_id = 0x01410cc0,
@@ -291,7 +291,7 @@
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
-		.driver = {.owner = THIS_MODULE,},
+		.driver = { .owner = THIS_MODULE },
 	},
 	{
 		.phy_id = 0x01410cd0,
@@ -304,8 +304,21 @@
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
-		.driver = {.owner = THIS_MODULE,},
-	}
+		.driver = { .owner = THIS_MODULE },
+	},
+	{
+		.phy_id = 0x01410e30,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1240",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1111_config_init,
+		.config_aneg = &marvell_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
 };
 
 static int __init marvell_init(void)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c046121..f6e4848 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -706,7 +706,7 @@
 		return retval;
 	}
 
-	pr_info("%s: Registered new driver\n", new_driver->name);
+	pr_debug("%s: Registered new driver\n", new_driver->name);
 
 	return 0;
 }
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 27f5b90..f023d5b 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -160,7 +160,7 @@
 
 	err = -ENOMEM;
 	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
-	if (ap == 0)
+	if (!ap)
 		goto out;
 
 	/* initialize the asyncppp structure */
@@ -215,7 +215,7 @@
 	ap = tty->disc_data;
 	tty->disc_data = NULL;
 	write_unlock_irq(&disc_data_lock);
-	if (ap == 0)
+	if (!ap)
 		return;
 
 	/*
@@ -230,10 +230,10 @@
 	tasklet_kill(&ap->tsk);
 
 	ppp_unregister_channel(&ap->chan);
-	if (ap->rpkt != 0)
+	if (ap->rpkt)
 		kfree_skb(ap->rpkt);
 	skb_queue_purge(&ap->rqueue);
-	if (ap->tpkt != 0)
+	if (ap->tpkt)
 		kfree_skb(ap->tpkt);
 	kfree(ap);
 }
@@ -285,13 +285,13 @@
 	int err, val;
 	int __user *p = (int __user *)arg;
 
-	if (ap == 0)
+	if (!ap)
 		return -ENXIO;
 	err = -EFAULT;
 	switch (cmd) {
 	case PPPIOCGCHAN:
 		err = -ENXIO;
-		if (ap == 0)
+		if (!ap)
 			break;
 		err = -EFAULT;
 		if (put_user(ppp_channel_index(&ap->chan), p))
@@ -301,7 +301,7 @@
 
 	case PPPIOCGUNIT:
 		err = -ENXIO;
-		if (ap == 0)
+		if (!ap)
 			break;
 		err = -EFAULT;
 		if (put_user(ppp_unit_number(&ap->chan), p))
@@ -309,16 +309,11 @@
 		err = 0;
 		break;
 
-	case TCGETS:
-	case TCGETA:
-		err = n_tty_ioctl(tty, file, cmd, arg);
-		break;
-
 	case TCFLSH:
 		/* flush our buffers and the serial port's buffer */
 		if (arg == TCIOFLUSH || arg == TCOFLUSH)
 			ppp_async_flush_output(ap);
-		err = n_tty_ioctl(tty, file, cmd, arg);
+		err = tty_perform_flush(tty, arg);
 		break;
 
 	case FIONREAD:
@@ -329,7 +324,8 @@
 		break;
 
 	default:
-		err = -ENOIOCTLCMD;
+		/* Try the various mode ioctls */
+		err = tty_mode_ioctl(tty, file, cmd, arg);
 	}
 
 	ap_put(ap);
@@ -354,7 +350,7 @@
 	struct asyncppp *ap = ap_get(tty);
 	unsigned long flags;
 
-	if (ap == 0)
+	if (!ap)
 		return;
 	spin_lock_irqsave(&ap->recv_lock, flags);
 	ppp_async_input(ap, buf, cflags, count);
@@ -373,7 +369,7 @@
 	struct asyncppp *ap = ap_get(tty);
 
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	if (ap == 0)
+	if (!ap)
 		return;
 	set_bit(XMIT_WAKEUP, &ap->xmit_flags);
 	tasklet_schedule(&ap->tsk);
@@ -688,7 +684,7 @@
 				tty_stuffed = 1;
 			continue;
 		}
-		if (ap->optr >= ap->olim && ap->tpkt != 0) {
+		if (ap->optr >= ap->olim && ap->tpkt) {
 			if (ppp_async_encode(ap)) {
 				/* finished processing ap->tpkt */
 				clear_bit(XMIT_FULL, &ap->xmit_flags);
@@ -708,7 +704,7 @@
 		clear_bit(XMIT_BUSY, &ap->xmit_flags);
 		/* any more work to do? if not, exit the loop */
 		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
-		      || (!tty_stuffed && ap->tpkt != 0)))
+		      || (!tty_stuffed && ap->tpkt)))
 			break;
 		/* more work to do, see if we can do it now */
 		if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
@@ -719,7 +715,7 @@
 
 flush:
 	clear_bit(XMIT_BUSY, &ap->xmit_flags);
-	if (ap->tpkt != 0) {
+	if (ap->tpkt) {
 		kfree_skb(ap->tpkt);
 		ap->tpkt = NULL;
 		clear_bit(XMIT_FULL, &ap->xmit_flags);
@@ -852,7 +848,7 @@
 		s = 0;
 		for (i = 0; i < count; ++i) {
 			c = buf[i];
-			if (flags != 0 && flags[i] != 0)
+			if (flags && flags[i] != 0)
 				continue;
 			s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
 			c = ((c >> 4) ^ c) & 0xf;
@@ -869,7 +865,7 @@
 			n = scan_ordinary(ap, buf, count);
 
 		f = 0;
-		if (flags != 0 && (ap->state & SC_TOSS) == 0) {
+		if (flags && (ap->state & SC_TOSS) == 0) {
 			/* check the flags to see if any char had an error */
 			for (j = 0; j < n; ++j)
 				if ((f = flags[j]) != 0)
@@ -882,9 +878,9 @@
 		} else if (n > 0 && (ap->state & SC_TOSS) == 0) {
 			/* stuff the chars in the skb */
 			skb = ap->rpkt;
-			if (skb == 0) {
+			if (!skb) {
 				skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
-				if (skb == 0)
+				if (!skb)
 					goto nomem;
  				ap->rpkt = skb;
  			}
@@ -931,7 +927,7 @@
 		++n;
 
 		buf += n;
-		if (flags != 0)
+		if (flags)
 			flags += n;
 		count -= n;
 	}
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4b49d0e..4f69037 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -367,7 +367,7 @@
 	struct ppp_file *pf = file->private_data;
 	struct ppp *ppp;
 
-	if (pf != 0) {
+	if (pf) {
 		file->private_data = NULL;
 		if (pf->kind == INTERFACE) {
 			ppp = PF_TO_PPP(pf);
@@ -398,7 +398,7 @@
 
 	ret = count;
 
-	if (pf == 0)
+	if (!pf)
 		return -ENXIO;
 	add_wait_queue(&pf->rwait, &wait);
 	for (;;) {
@@ -431,7 +431,7 @@
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&pf->rwait, &wait);
 
-	if (skb == 0)
+	if (!skb)
 		goto out;
 
 	ret = -EOVERFLOW;
@@ -455,11 +455,11 @@
 	struct sk_buff *skb;
 	ssize_t ret;
 
-	if (pf == 0)
+	if (!pf)
 		return -ENXIO;
 	ret = -ENOMEM;
 	skb = alloc_skb(count + pf->hdrlen, GFP_KERNEL);
-	if (skb == 0)
+	if (!skb)
 		goto out;
 	skb_reserve(skb, pf->hdrlen);
 	ret = -EFAULT;
@@ -491,11 +491,11 @@
 	struct ppp_file *pf = file->private_data;
 	unsigned int mask;
 
-	if (pf == 0)
+	if (!pf)
 		return 0;
 	poll_wait(file, &pf->rwait, wait);
 	mask = POLLOUT | POLLWRNORM;
-	if (skb_peek(&pf->rq) != 0)
+	if (skb_peek(&pf->rq))
 		mask |= POLLIN | POLLRDNORM;
 	if (pf->dead)
 		mask |= POLLHUP;
@@ -559,7 +559,7 @@
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
-	if (pf == 0)
+	if (!pf)
 		return ppp_unattached_ioctl(pf, file, cmd, arg);
 
 	if (cmd == PPPIOCDETACH) {
@@ -689,13 +689,13 @@
 			val &= 0xffff;
 		}
 		vj = slhc_init(val2+1, val+1);
-		if (vj == 0) {
+		if (!vj) {
 			printk(KERN_ERR "PPP: no memory (VJ compressor)\n");
 			err = -ENOMEM;
 			break;
 		}
 		ppp_lock(ppp);
-		if (ppp->vj != 0)
+		if (ppp->vj)
 			slhc_free(ppp->vj);
 		ppp->vj = vj;
 		ppp_unlock(ppp);
@@ -786,7 +786,7 @@
 		if (get_user(unit, p))
 			break;
 		ppp = ppp_create_interface(unit, &err);
-		if (ppp == 0)
+		if (!ppp)
 			break;
 		file->private_data = &ppp->file;
 		ppp->owner = file;
@@ -803,7 +803,7 @@
 		mutex_lock(&all_ppp_mutex);
 		err = -ENXIO;
 		ppp = ppp_find_unit(unit);
-		if (ppp != 0) {
+		if (ppp) {
 			atomic_inc(&ppp->file.refcnt);
 			file->private_data = &ppp->file;
 			err = 0;
@@ -817,7 +817,7 @@
 		spin_lock_bh(&all_channels_lock);
 		err = -ENXIO;
 		chan = ppp_find_channel(unit);
-		if (chan != 0) {
+		if (chan) {
 			atomic_inc(&chan->file.refcnt);
 			file->private_data = &chan->file;
 			err = 0;
@@ -946,9 +946,9 @@
 
 	case SIOCGPPPCSTATS:
 		memset(&cstats, 0, sizeof(cstats));
-		if (ppp->xc_state != 0)
+		if (ppp->xc_state)
 			ppp->xcomp->comp_stat(ppp->xc_state, &cstats.c);
-		if (ppp->rc_state != 0)
+		if (ppp->rc_state)
 			ppp->rcomp->decomp_stat(ppp->rc_state, &cstats.d);
 		if (copy_to_user(addr, &cstats, sizeof(cstats)))
 			break;
@@ -993,14 +993,14 @@
 	struct sk_buff *skb;
 
 	ppp_xmit_lock(ppp);
-	if (ppp->dev != 0) {
+	if (ppp->dev) {
 		ppp_push(ppp);
-		while (ppp->xmit_pending == 0
-		       && (skb = skb_dequeue(&ppp->file.xq)) != 0)
+		while (!ppp->xmit_pending
+		       && (skb = skb_dequeue(&ppp->file.xq)))
 			ppp_send_frame(ppp, skb);
 		/* If there's no work left to do, tell the core net
 		   code that we can accept some more. */
-		if (ppp->xmit_pending == 0 && skb_peek(&ppp->file.xq) == 0)
+		if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq))
 			netif_wake_queue(ppp->dev);
 	}
 	ppp_xmit_unlock(ppp);
@@ -1100,12 +1100,12 @@
 
 	switch (proto) {
 	case PPP_IP:
-		if (ppp->vj == 0 || (ppp->flags & SC_COMP_TCP) == 0)
+		if (!ppp->vj || (ppp->flags & SC_COMP_TCP) == 0)
 			break;
 		/* try to do VJ TCP header compression */
 		new_skb = alloc_skb(skb->len + ppp->dev->hard_header_len - 2,
 				    GFP_ATOMIC);
-		if (new_skb == 0) {
+		if (!new_skb) {
 			printk(KERN_ERR "PPP: no memory (VJ comp pkt)\n");
 			goto drop;
 		}
@@ -1140,7 +1140,7 @@
 	}
 
 	/* try to do packet compression */
-	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
+	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state
 	    && proto != PPP_LCP && proto != PPP_CCP) {
 		if (!(ppp->flags & SC_CCP_UP) && (ppp->flags & SC_MUST_COMP)) {
 			if (net_ratelimit())
@@ -1185,7 +1185,7 @@
 	struct channel *pch;
 	struct sk_buff *skb = ppp->xmit_pending;
 
-	if (skb == 0)
+	if (!skb)
 		return;
 
 	list = &ppp->channels;
@@ -1355,7 +1355,7 @@
 		if (flen == len && nfree == 0)
 			bits |= E;
 		frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC);
-		if (frag == 0)
+		if (!frag)
 			goto noskb;
 		q = skb_put(frag, flen + hdrlen);
 
@@ -1425,7 +1425,7 @@
 	struct ppp *ppp;
 
 	spin_lock_bh(&pch->downl);
-	if (pch->chan != 0) {
+	if (pch->chan) {
 		while (!skb_queue_empty(&pch->file.xq)) {
 			skb = skb_dequeue(&pch->file.xq);
 			if (!pch->chan->ops->start_xmit(pch->chan, skb)) {
@@ -1443,7 +1443,7 @@
 	if (skb_queue_empty(&pch->file.xq)) {
 		read_lock_bh(&pch->upl);
 		ppp = pch->ppp;
-		if (ppp != 0)
+		if (ppp)
 			ppp_xmit_process(ppp);
 		read_unlock_bh(&pch->upl);
 	}
@@ -1462,7 +1462,7 @@
 {
 	ppp_recv_lock(ppp);
 	/* ppp->dev == 0 means interface is closing down */
-	if (ppp->dev != 0)
+	if (ppp->dev)
 		ppp_receive_frame(ppp, skb, pch);
 	else
 		kfree_skb(skb);
@@ -1475,19 +1475,19 @@
 	struct channel *pch = chan->ppp;
 	int proto;
 
-	if (pch == 0 || skb->len == 0) {
+	if (!pch || skb->len == 0) {
 		kfree_skb(skb);
 		return;
 	}
 
 	proto = PPP_PROTO(skb);
 	read_lock_bh(&pch->upl);
-	if (pch->ppp == 0 || proto >= 0xc000 || proto == PPP_CCPFRAG) {
+	if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
 		/* put it on the channel queue */
 		skb_queue_tail(&pch->file.rq, skb);
 		/* drop old frames if queue too long */
 		while (pch->file.rq.qlen > PPP_MAX_RQLEN
-		       && (skb = skb_dequeue(&pch->file.rq)) != 0)
+		       && (skb = skb_dequeue(&pch->file.rq)))
 			kfree_skb(skb);
 		wake_up_interruptible(&pch->file.rwait);
 	} else {
@@ -1503,13 +1503,13 @@
 	struct channel *pch = chan->ppp;
 	struct sk_buff *skb;
 
-	if (pch == 0)
+	if (!pch)
 		return;
 
 	read_lock_bh(&pch->upl);
-	if (pch->ppp != 0) {
+	if (pch->ppp) {
 		skb = alloc_skb(0, GFP_ATOMIC);
-		if (skb != 0) {
+		if (skb) {
 			skb->len = 0;		/* probably unnecessary */
 			skb->cb[0] = code;
 			ppp_do_recv(pch->ppp, skb, pch);
@@ -1548,7 +1548,7 @@
 ppp_receive_error(struct ppp *ppp)
 {
 	++ppp->stats.rx_errors;
-	if (ppp->vj != 0)
+	if (ppp->vj)
 		slhc_toss(ppp->vj);
 }
 
@@ -1563,7 +1563,7 @@
 	 * Note that some decompressors need to see uncompressed frames
 	 * that come in as well as compressed frames.
 	 */
-	if (ppp->rc_state != 0 && (ppp->rstate & SC_DECOMP_RUN)
+	if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN)
 	    && (ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
 		skb = ppp_decompress_frame(ppp, skb);
 
@@ -1574,13 +1574,13 @@
 	switch (proto) {
 	case PPP_VJC_COMP:
 		/* decompress VJ compressed packets */
-		if (ppp->vj == 0 || (ppp->flags & SC_REJ_COMP_TCP))
+		if (!ppp->vj || (ppp->flags & SC_REJ_COMP_TCP))
 			goto err;
 
 		if (skb_tailroom(skb) < 124 || skb_cloned(skb)) {
 			/* copy to a new sk_buff with more tailroom */
 			ns = dev_alloc_skb(skb->len + 128);
-			if (ns == 0) {
+			if (!ns) {
 				printk(KERN_ERR"PPP: no memory (VJ decomp)\n");
 				goto err;
 			}
@@ -1606,7 +1606,7 @@
 		break;
 
 	case PPP_VJC_UNCOMP:
-		if (ppp->vj == 0 || (ppp->flags & SC_REJ_COMP_TCP))
+		if (!ppp->vj || (ppp->flags & SC_REJ_COMP_TCP))
 			goto err;
 
 		/* Until we fix the decompressor need to make sure
@@ -1636,7 +1636,7 @@
 		skb_queue_tail(&ppp->file.rq, skb);
 		/* limit queue length by dropping old frames */
 		while (ppp->file.rq.qlen > PPP_MAX_RQLEN
-		       && (skb = skb_dequeue(&ppp->file.rq)) != 0)
+		       && (skb = skb_dequeue(&ppp->file.rq)))
 			kfree_skb(skb);
 		/* wake up any process polling or blocking on read */
 		wake_up_interruptible(&ppp->file.rwait);
@@ -1718,7 +1718,7 @@
 		}
 
 		ns = dev_alloc_skb(obuff_size);
-		if (ns == 0) {
+		if (!ns) {
 			printk(KERN_ERR "ppp_decompress_frame: no memory\n");
 			goto err;
 		}
@@ -1836,7 +1836,7 @@
 		ppp->minseq = ppp->mrq.next->sequence;
 
 	/* Pull completed packets off the queue and receive them. */
-	while ((skb = ppp_mp_reconstruct(ppp)) != 0)
+	while ((skb = ppp_mp_reconstruct(ppp)))
 		ppp_receive_nonmp_frame(ppp, skb);
 
 	return;
@@ -2002,7 +2002,7 @@
 	struct channel *pch;
 
 	pch = kzalloc(sizeof(struct channel), GFP_KERNEL);
-	if (pch == 0)
+	if (!pch)
 		return -ENOMEM;
 	pch->ppp = NULL;
 	pch->chan = chan;
@@ -2030,7 +2030,7 @@
 {
 	struct channel *pch = chan->ppp;
 
-	if (pch != 0)
+	if (pch)
 		return pch->file.index;
 	return -1;
 }
@@ -2043,9 +2043,9 @@
 	struct channel *pch = chan->ppp;
 	int unit = -1;
 
-	if (pch != 0) {
+	if (pch) {
 		read_lock_bh(&pch->upl);
-		if (pch->ppp != 0)
+		if (pch->ppp)
 			unit = pch->ppp->file.index;
 		read_unlock_bh(&pch->upl);
 	}
@@ -2061,7 +2061,7 @@
 {
 	struct channel *pch = chan->ppp;
 
-	if (pch == 0)
+	if (!pch)
 		return;		/* should never happen */
 	chan->ppp = NULL;
 
@@ -2093,7 +2093,7 @@
 {
 	struct channel *pch = chan->ppp;
 
-	if (pch == 0)
+	if (!pch)
 		return;
 	ppp_channel_push(pch);
 }
@@ -2124,18 +2124,18 @@
 
 	cp = find_compressor(ccp_option[0]);
 #ifdef CONFIG_KMOD
-	if (cp == 0) {
+	if (!cp) {
 		request_module("ppp-compress-%d", ccp_option[0]);
 		cp = find_compressor(ccp_option[0]);
 	}
 #endif /* CONFIG_KMOD */
-	if (cp == 0)
+	if (!cp)
 		goto out;
 
 	err = -ENOBUFS;
 	if (data.transmit) {
 		state = cp->comp_alloc(ccp_option, data.length);
-		if (state != 0) {
+		if (state) {
 			ppp_xmit_lock(ppp);
 			ppp->xstate &= ~SC_COMP_RUN;
 			ocomp = ppp->xcomp;
@@ -2143,7 +2143,7 @@
 			ppp->xcomp = cp;
 			ppp->xc_state = state;
 			ppp_xmit_unlock(ppp);
-			if (ostate != 0) {
+			if (ostate) {
 				ocomp->comp_free(ostate);
 				module_put(ocomp->owner);
 			}
@@ -2153,7 +2153,7 @@
 
 	} else {
 		state = cp->decomp_alloc(ccp_option, data.length);
-		if (state != 0) {
+		if (state) {
 			ppp_recv_lock(ppp);
 			ppp->rstate &= ~SC_DECOMP_RUN;
 			ocomp = ppp->rcomp;
@@ -2161,7 +2161,7 @@
 			ppp->rcomp = cp;
 			ppp->rc_state = state;
 			ppp_recv_unlock(ppp);
-			if (ostate != 0) {
+			if (ostate) {
 				ocomp->decomp_free(ostate);
 				module_put(ocomp->owner);
 			}
@@ -2228,7 +2228,7 @@
 			break;
 		if (inbound) {
 			/* we will start receiving compressed packets */
-			if (ppp->rc_state == 0)
+			if (!ppp->rc_state)
 				break;
 			if (ppp->rcomp->decomp_init(ppp->rc_state, dp, len,
 					ppp->file.index, 0, ppp->mru, ppp->debug)) {
@@ -2237,7 +2237,7 @@
 			}
 		} else {
 			/* we will soon start sending compressed packets */
-			if (ppp->xc_state == 0)
+			if (!ppp->xc_state)
 				break;
 			if (ppp->xcomp->comp_init(ppp->xc_state, dp, len,
 					ppp->file.index, 0, ppp->debug))
@@ -2320,11 +2320,11 @@
 	int ret;
 	spin_lock(&compressor_list_lock);
 	ret = -EEXIST;
-	if (find_comp_entry(cp->compress_proto) != 0)
+	if (find_comp_entry(cp->compress_proto))
 		goto out;
 	ret = -ENOMEM;
 	ce = kmalloc(sizeof(struct compressor_entry), GFP_ATOMIC);
-	if (ce == 0)
+	if (!ce)
 		goto out;
 	ret = 0;
 	ce->comp = cp;
@@ -2342,7 +2342,7 @@
 
 	spin_lock(&compressor_list_lock);
 	ce = find_comp_entry(cp->compress_proto);
-	if (ce != 0 && ce->comp == cp) {
+	if (ce && ce->comp == cp) {
 		list_del(&ce->list);
 		kfree(ce);
 	}
@@ -2358,7 +2358,7 @@
 
 	spin_lock(&compressor_list_lock);
 	ce = find_comp_entry(type);
-	if (ce != 0) {
+	if (ce) {
 		cp = ce->comp;
 		if (!try_module_get(cp->owner))
 			cp = NULL;
@@ -2383,7 +2383,7 @@
 	st->p.ppp_opackets = ppp->stats.tx_packets;
 	st->p.ppp_oerrors = ppp->stats.tx_errors;
 	st->p.ppp_obytes = ppp->stats.tx_bytes;
-	if (vj == 0)
+	if (!vj)
 		return;
 	st->vj.vjs_packets = vj->sls_o_compressed + vj->sls_o_uncompressed;
 	st->vj.vjs_compressed = vj->sls_o_compressed;
@@ -2604,11 +2604,11 @@
 
 	mutex_lock(&all_ppp_mutex);
 	ppp = ppp_find_unit(unit);
-	if (ppp == 0)
+	if (!ppp)
 		goto out;
 	write_lock_bh(&pch->upl);
 	ret = -EINVAL;
-	if (pch->ppp != 0)
+	if (pch->ppp)
 		goto outl;
 
 	ppp_lock(ppp);
@@ -2644,7 +2644,7 @@
 	ppp = pch->ppp;
 	pch->ppp = NULL;
 	write_unlock_bh(&pch->upl);
-	if (ppp != 0) {
+	if (ppp) {
 		/* remove it from the ppp unit's list */
 		ppp_lock(ppp);
 		list_del(&pch->clist);
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index ce64032..f0c6a19 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -209,7 +209,7 @@
 
 	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
 	err = -ENOMEM;
-	if (ap == 0)
+	if (!ap)
 		goto out;
 
 	/* initialize the syncppp structure */
@@ -262,7 +262,7 @@
 	ap = tty->disc_data;
 	tty->disc_data = NULL;
 	write_unlock_irq(&disc_data_lock);
-	if (ap == 0)
+	if (!ap)
 		return;
 
 	/*
@@ -278,7 +278,7 @@
 
 	ppp_unregister_channel(&ap->chan);
 	skb_queue_purge(&ap->rqueue);
-	if (ap->tpkt != 0)
+	if (ap->tpkt)
 		kfree_skb(ap->tpkt);
 	kfree(ap);
 }
@@ -325,13 +325,13 @@
 	int __user *p = (int __user *)arg;
 	int err, val;
 
-	if (ap == 0)
+	if (!ap)
 		return -ENXIO;
 	err = -EFAULT;
 	switch (cmd) {
 	case PPPIOCGCHAN:
 		err = -ENXIO;
-		if (ap == 0)
+		if (!ap)
 			break;
 		err = -EFAULT;
 		if (put_user(ppp_channel_index(&ap->chan), p))
@@ -341,7 +341,7 @@
 
 	case PPPIOCGUNIT:
 		err = -ENXIO;
-		if (ap == 0)
+		if (!ap)
 			break;
 		err = -EFAULT;
 		if (put_user(ppp_unit_number(&ap->chan), p))
@@ -349,16 +349,11 @@
 		err = 0;
 		break;
 
-	case TCGETS:
-	case TCGETA:
-		err = n_tty_ioctl(tty, file, cmd, arg);
-		break;
-
 	case TCFLSH:
 		/* flush our buffers and the serial port's buffer */
 		if (arg == TCIOFLUSH || arg == TCOFLUSH)
 			ppp_sync_flush_output(ap);
-		err = n_tty_ioctl(tty, file, cmd, arg);
+		err = tty_perform_flush(tty, arg);
 		break;
 
 	case FIONREAD:
@@ -369,7 +364,8 @@
 		break;
 
 	default:
-		err = -ENOIOCTLCMD;
+		err = tty_mode_ioctl(tty, file, cmd, arg);
+		break;
 	}
 
 	sp_put(ap);
@@ -394,7 +390,7 @@
 	struct syncppp *ap = sp_get(tty);
 	unsigned long flags;
 
-	if (ap == 0)
+	if (!ap)
 		return;
 	spin_lock_irqsave(&ap->recv_lock, flags);
 	ppp_sync_input(ap, buf, cflags, count);
@@ -413,7 +409,7 @@
 	struct syncppp *ap = sp_get(tty);
 
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	if (ap == 0)
+	if (!ap)
 		return;
 	set_bit(XMIT_WAKEUP, &ap->xmit_flags);
 	tasklet_schedule(&ap->tsk);
@@ -655,7 +651,7 @@
 	for (;;) {
 		if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
 			tty_stuffed = 0;
-		if (!tty_stuffed && ap->tpkt != 0) {
+		if (!tty_stuffed && ap->tpkt) {
 			set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 			sent = tty->driver->write(tty, ap->tpkt->data, ap->tpkt->len);
 			if (sent < 0)
@@ -673,7 +669,7 @@
 		/* haven't made any progress */
 		spin_unlock_bh(&ap->xmit_lock);
 		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
-		      || (!tty_stuffed && ap->tpkt != 0)))
+		      || (!tty_stuffed && ap->tpkt)))
 			break;
 		if (!spin_trylock_bh(&ap->xmit_lock))
 			break;
@@ -681,7 +677,7 @@
 	return done;
 
 flush:
-	if (ap->tpkt != 0) {
+	if (ap->tpkt) {
 		kfree_skb(ap->tpkt);
 		ap->tpkt = NULL;
 		clear_bit(XMIT_FULL, &ap->xmit_flags);
@@ -736,7 +732,8 @@
 		ppp_print_buffer ("receive buffer", buf, count);
 
 	/* stuff the chars in the skb */
-	if ((skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2)) == 0) {
+	skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
+	if (!skb) {
 		printk(KERN_ERR "PPPsync: no memory (input pkt)\n");
 		goto err;
 	}
@@ -744,7 +741,7 @@
 	if (buf[0] != PPP_ALLSTATIONS)
 		skb_reserve(skb, 2 + (buf[0] & 1));
 
-	if (flags != 0 && *flags) {
+	if (flags && *flags) {
 		/* error flag set, ignore frame */
 		goto err;
 	} else if (count > skb_tailroom(skb)) {
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index f8904fd..a7556cd 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -488,7 +488,7 @@
 {
 	struct pppol2tp_session *session = NULL;
 	struct pppol2tp_tunnel *tunnel;
-	unsigned char *ptr;
+	unsigned char *ptr, *optr;
 	u16 hdrflags;
 	u16 tunnel_id, session_id;
 	int length;
@@ -496,7 +496,7 @@
 
 	tunnel = pppol2tp_sock_to_tunnel(sock);
 	if (tunnel == NULL)
-		goto error;
+		goto no_tunnel;
 
 	/* UDP always verifies the packet length. */
 	__skb_pull(skb, sizeof(struct udphdr));
@@ -509,7 +509,7 @@
 	}
 
 	/* Point to L2TP header */
-	ptr = skb->data;
+	optr = ptr = skb->data;
 
 	/* Get L2TP header flags */
 	hdrflags = ntohs(*(__be16*)ptr);
@@ -637,12 +637,14 @@
 	/* If offset bit set, skip it. */
 	if (hdrflags & L2TP_HDRFLAG_O) {
 		offset = ntohs(*(__be16 *)ptr);
-		skb->transport_header += 2 + offset;
-		if (!pskb_may_pull(skb, skb_transport_offset(skb) + 2))
-			goto discard;
+		ptr += 2 + offset;
 	}
 
-	__skb_pull(skb, skb_transport_offset(skb));
+	offset = ptr - optr;
+	if (!pskb_may_pull(skb, offset))
+		goto discard;
+
+	__skb_pull(skb, offset);
 
 	/* Skip PPP header, if present.	 In testing, Microsoft L2TP clients
 	 * don't send the PPP header (PPP header compression enabled), but
@@ -652,6 +654,9 @@
 	 * Note that skb->data[] isn't dereferenced from a u16 ptr here since
 	 * the field may be unaligned.
 	 */
+	if (!pskb_may_pull(skb, 2))
+		goto discard;
+
 	if ((skb->data[0] == 0xff) && (skb->data[1] == 0x03))
 		skb_pull(skb, 2);
 
@@ -709,6 +714,10 @@
 	return 0;
 
 error:
+	/* Put UDP header back */
+	__skb_push(skb, sizeof(struct udphdr));
+
+no_tunnel:
 	return 1;
 }
 
@@ -1050,6 +1059,8 @@
 	/* Get routing info from the tunnel socket */
 	dst_release(skb->dst);
 	skb->dst = sk_dst_get(sk_tun);
+	skb_orphan(skb);
+	skb->sk = sk_tun;
 
 	/* Queue the packet to IP for output */
 	len = skb->len;
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 30adf72..a579111 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1456,16 +1456,11 @@
 			   PHYAddr[qdev->mac_index]);
 	reg &= ~PHY_GIG_ALL_PARAMS;
 
-	if(portConfiguration &
-	   PORT_CONFIG_FULL_DUPLEX_ENABLED &
-	   PORT_CONFIG_1000MB_SPEED) {
-		reg |= PHY_GIG_ADV_1000F;
-	}
-
-	if(portConfiguration &
-	   PORT_CONFIG_HALF_DUPLEX_ENABLED &
-	   PORT_CONFIG_1000MB_SPEED) {
-		reg |= PHY_GIG_ADV_1000H;
+	if(portConfiguration & PORT_CONFIG_1000MB_SPEED) {
+		if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) 
+			reg |= PHY_GIG_ADV_1000F;
+		else 
+			reg |= PHY_GIG_ADV_1000H;
 	}
 
 	ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
@@ -1645,8 +1640,11 @@
 	return 0;
 }
 
-static void ql_link_state_machine(struct ql3_adapter *qdev)
+static void ql_link_state_machine_work(struct work_struct *work)
 {
+	struct ql3_adapter *qdev =
+		container_of(work, struct ql3_adapter, link_state_work.work);
+
 	u32 curr_link_state;
 	unsigned long hw_flags;
 
@@ -1661,6 +1659,10 @@
 			       "state.\n", qdev->ndev->name);
 
 		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+		/* Restart timer on 2 second interval. */
+		mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);\
+
 		return;
 	}
 
@@ -1705,6 +1707,9 @@
 		break;
 	}
 	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+	/* Restart timer on 2 second interval. */
+	mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
 }
 
 /*
@@ -3941,19 +3946,7 @@
 static void ql3xxx_timer(unsigned long ptr)
 {
 	struct ql3_adapter *qdev = (struct ql3_adapter *)ptr;
-
-	if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) {
-		printk(KERN_DEBUG PFX
-		       "%s: Reset in progress.\n",
-		       qdev->ndev->name);
-		goto end;
-	}
-
-	ql_link_state_machine(qdev);
-
-	/* Restart timer on 2 second interval. */
-end:
-	mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
+	queue_delayed_work(qdev->workqueue, &qdev->link_state_work, 0);
 }
 
 static int __devinit ql3xxx_probe(struct pci_dev *pdev,
@@ -4103,6 +4096,7 @@
 	qdev->workqueue = create_singlethread_workqueue(ndev->name);
 	INIT_DELAYED_WORK(&qdev->reset_work, ql_reset_work);
 	INIT_DELAYED_WORK(&qdev->tx_timeout_work, ql_tx_timeout_work);
+	INIT_DELAYED_WORK(&qdev->link_state_work, ql_link_state_machine_work);
 
 	init_timer(&qdev->adapter_timer);
 	qdev->adapter_timer.function = ql3xxx_timer;
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index fbcb0b9..d0ffb30 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -1286,6 +1286,7 @@
 	struct workqueue_struct *workqueue;
 	struct delayed_work reset_work;
 	struct delayed_work tx_timeout_work;
+	struct delayed_work link_state_work;
 	u32 max_frame_size;
 	u32 device_id;
 	u16 phyType;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b94fa7e..1f647b9 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -171,6 +171,8 @@
 	{ PCI_DEVICE(0x16ec,			0x0116), 0, 0, RTL_CFG_0 },
 	{ PCI_VENDOR_ID_LINKSYS,		0x1032,
 		PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
+	{ 0x0001,				0x8168,
+		PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
 	{0,},
 };
 
@@ -468,7 +470,7 @@
 {
 	int i;
 
-	RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0xFF) << 16 | value);
+	RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff));
 
 	for (i = 20; i > 0; i--) {
 		/*
@@ -485,7 +487,7 @@
 {
 	int i, value = -1;
 
-	RTL_W32(PHYAR, 0x0 | (reg_addr & 0xFF) << 16);
+	RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16);
 
 	for (i = 20; i > 0; i--) {
 		/*
@@ -493,7 +495,7 @@
 		 * the specified MII register.
 		 */
 		if (RTL_R32(PHYAR) & 0x80000000) {
-			value = (int) (RTL_R32(PHYAR) & 0xFFFF);
+			value = RTL_R32(PHYAR) & 0xffff;
 			break;
 		}
 		udelay(25);
@@ -1245,16 +1247,6 @@
 
 	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
-static void rtl8168b_hw_phy_config(void __iomem *ioaddr)
-{
-	struct phy_reg phy_reg_init[] = {
-		{ 0x1f, 0x0000 },
-		{ 0x10, 0xf41b },
-		{ 0x1f, 0x0000 }
-	};
-
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
-}
 
 static void rtl8168cp_hw_phy_config(void __iomem *ioaddr)
 {
@@ -1324,11 +1316,6 @@
 	case RTL_GIGA_MAC_VER_04:
 		rtl8169sb_hw_phy_config(ioaddr);
 		break;
-	case RTL_GIGA_MAC_VER_11:
-	case RTL_GIGA_MAC_VER_12:
-	case RTL_GIGA_MAC_VER_17:
-		rtl8168b_hw_phy_config(ioaddr);
-		break;
 	case RTL_GIGA_MAC_VER_18:
 		rtl8168cp_hw_phy_config(ioaddr);
 		break;
@@ -1739,7 +1726,8 @@
 	tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
 	RTL_W8(Cfg9346, Cfg9346_Lock);
 
-	if (RTL_R8(PHYstatus) & TBI_Enable) {
+	if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
+	    (RTL_R8(PHYstatus) & TBI_Enable)) {
 		tp->set_speed = rtl8169_set_speed_tbi;
 		tp->get_settings = rtl8169_gset_tbi;
 		tp->phy_reset_enable = rtl8169_tbi_reset_enable;
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index b822859..73a7e65 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -78,12 +78,6 @@
  * stack will need to know about I/O vectors or something similar.
  */
 
-/*
- * sysctl_[wr]mem_max are checked at init time to see if they are at
- * least 256KB and increased to 256KB if they are not. This is done to
- * avoid ending up with socket buffers smaller than the MTU size,
- */
-
 static int __devinit rr_init_one(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
@@ -561,18 +555,6 @@
 	sram_size = rr_read_eeprom_word(rrpriv, (void *)8);
 	printk("  SRAM size 0x%06x\n", sram_size);
 
-	if (sysctl_rmem_max < 262144){
-		printk("  Receive socket buffer limit too low (%i), "
-		       "setting to 262144\n", sysctl_rmem_max);
-		sysctl_rmem_max = 262144;
-	}
-
-	if (sysctl_wmem_max < 262144){
-		printk("  Transmit socket buffer limit too low (%i), "
-		       "setting to 262144\n", sysctl_wmem_max);
-		sysctl_wmem_max = 262144;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index b8c0e7b..6326667 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.5"
+#define DRV_VERSION "2.0.26.6"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -3775,6 +3775,40 @@
 
 	return err;
 }
+
+static void remove_msix_isr(struct s2io_nic *sp)
+{
+	int i;
+	u16 msi_control;
+
+	for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+		if (sp->s2io_entries[i].in_use ==
+			MSIX_REGISTERED_SUCCESS) {
+			int vector = sp->entries[i].vector;
+			void *arg = sp->s2io_entries[i].arg;
+			free_irq(vector, arg);
+		}
+	}
+
+	kfree(sp->entries);
+	kfree(sp->s2io_entries);
+	sp->entries = NULL;
+	sp->s2io_entries = NULL;
+
+	pci_read_config_word(sp->pdev, 0x42, &msi_control);
+	msi_control &= 0xFFFE; /* Disable MSI */
+	pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+	pci_disable_msix(sp->pdev);
+}
+
+static void remove_inta_isr(struct s2io_nic *sp)
+{
+	struct net_device *dev = sp->dev;
+
+	free_irq(sp->pdev->irq, dev);
+}
+
 /* ********************************************************* *
  * Functions defined below concern the OS part of the driver *
  * ********************************************************* */
@@ -3809,28 +3843,9 @@
 		int ret = s2io_enable_msi_x(sp);
 
 		if (!ret) {
-			u16 msi_control;
-
 			ret = s2io_test_msi(sp);
-
 			/* rollback MSI-X, will re-enable during add_isr() */
-			kfree(sp->entries);
-			sp->mac_control.stats_info->sw_stat.mem_freed +=
-				(MAX_REQUESTED_MSI_X *
-				sizeof(struct msix_entry));
-			kfree(sp->s2io_entries);
-			sp->mac_control.stats_info->sw_stat.mem_freed +=
-				(MAX_REQUESTED_MSI_X *
-				sizeof(struct s2io_msix_entry));
-			sp->entries = NULL;
-			sp->s2io_entries = NULL;
-
-			pci_read_config_word(sp->pdev, 0x42, &msi_control);
-			msi_control &= 0xFFFE; /* Disable MSI */
-			pci_write_config_word(sp->pdev, 0x42, msi_control);
-
-			pci_disable_msix(sp->pdev);
-
+			remove_msix_isr(sp);
 		}
 		if (ret) {
 
@@ -6719,15 +6734,22 @@
 				}
 			}
 			if (err) {
+				remove_msix_isr(sp);
 				DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
 					  "failed\n", dev->name, i);
-				DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-				return -1;
+				DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
+						 dev->name);
+				sp->config.intr_type = INTA;
+				break;
 			}
 			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
 		}
-		printk("MSI-X-TX %d entries enabled\n",msix_tx_cnt);
-		printk("MSI-X-RX %d entries enabled\n",msix_rx_cnt);
+		if (!err) {
+			printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
+				msix_tx_cnt);
+			printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
+				msix_rx_cnt);
+		}
 	}
 	if (sp->config.intr_type == INTA) {
 		err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
@@ -6742,40 +6764,10 @@
 }
 static void s2io_rem_isr(struct s2io_nic * sp)
 {
-	struct net_device *dev = sp->dev;
-	struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
-
-	if (sp->config.intr_type == MSI_X) {
-		int i;
-		u16 msi_control;
-
-		for (i=1; (sp->s2io_entries[i].in_use ==
-			MSIX_REGISTERED_SUCCESS); i++) {
-			int vector = sp->entries[i].vector;
-			void *arg = sp->s2io_entries[i].arg;
-
-			synchronize_irq(vector);
-			free_irq(vector, arg);
-		}
-
-		kfree(sp->entries);
-		stats->mem_freed +=
-			(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
-		kfree(sp->s2io_entries);
-		stats->mem_freed +=
-			(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
-		sp->entries = NULL;
-		sp->s2io_entries = NULL;
-
-		pci_read_config_word(sp->pdev, 0x42, &msi_control);
-		msi_control &= 0xFFFE; /* Disable MSI */
-		pci_write_config_word(sp->pdev, 0x42, msi_control);
-
-		pci_disable_msix(sp->pdev);
-	} else {
-		synchronize_irq(sp->pdev->irq);
-		free_irq(sp->pdev->irq, dev);
-	}
+	if (sp->config.intr_type == MSI_X)
+		remove_msix_isr(sp);
+	else
+		remove_inta_isr(sp);
 }
 
 static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index b9961dc..6d62250 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2512,31 +2512,32 @@
 	return err;
 }
 
-/* Assign Ram Buffer allocation to queue */
-static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, u32 space)
+static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, size_t len)
 {
 	u32 end;
 
-	/* convert from K bytes to qwords used for hw register */
-	start *= 1024/8;
-	space *= 1024/8;
-	end = start + space - 1;
+	start /= 8;
+	len /= 8;
+	end = start + len - 1;
 
 	skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
 	skge_write32(hw, RB_ADDR(q, RB_START), start);
-	skge_write32(hw, RB_ADDR(q, RB_END), end);
 	skge_write32(hw, RB_ADDR(q, RB_WP), start);
 	skge_write32(hw, RB_ADDR(q, RB_RP), start);
+	skge_write32(hw, RB_ADDR(q, RB_END), end);
 
 	if (q == Q_R1 || q == Q_R2) {
-		u32 tp = space - space/4;
-
 		/* Set thresholds on receive queue's */
-		skge_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
-		skge_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
-	} else if (hw->chip_id != CHIP_ID_GENESIS)
-		/* Genesis Tx Fifo is too small for normal store/forward */
+		skge_write32(hw, RB_ADDR(q, RB_RX_UTPP),
+			     start + (2*len)/3);
+		skge_write32(hw, RB_ADDR(q, RB_RX_LTPP),
+			     start + (len/3));
+	} else {
+		/* Enable store & forward on Tx queue's because
+		 * Tx FIFO is only 4K on Genesis and 1K on Yukon
+		 */
 		skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
+	}
 
 	skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
 }
@@ -2564,7 +2565,7 @@
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
-	u32 ramaddr, ramsize, rxspace;
+	u32 chunk, ram_addr;
 	size_t rx_size, tx_size;
 	int err;
 
@@ -2619,15 +2620,14 @@
 	spin_unlock_bh(&hw->phy_lock);
 
 	/* Configure RAMbuffers */
-	ramsize = (hw->ram_size - hw->ram_offset) / hw->ports;
-	ramaddr = hw->ram_offset + port * ramsize;
-	rxspace = 8 + (2*(ramsize - 16))/3;
+	chunk = hw->ram_size / ((hw->ports + 1)*2);
+	ram_addr = hw->ram_offset + 2 * chunk * port;
 
-	skge_ramset(hw, rxqaddr[port], ramaddr, rxspace);
-	skge_ramset(hw, txqaddr[port], ramaddr + rxspace, ramsize - rxspace);
-
+	skge_ramset(hw, rxqaddr[port], ram_addr, chunk);
 	skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean);
+
 	BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean);
+	skge_ramset(hw, txqaddr[port], ram_addr+chunk, chunk);
 	skge_qset(skge, txqaddr[port], skge->tx_ring.to_use);
 
 	/* Start receiver BMU */
@@ -3591,12 +3591,15 @@
 	if (hw->chip_id == CHIP_ID_GENESIS) {
 		if (t8 == 3) {
 			/* special case: 4 x 64k x 36, offset = 0x80000 */
-			hw->ram_size = 1024;
-			hw->ram_offset = 512;
+			hw->ram_size = 0x100000;
+			hw->ram_offset = 0x80000;
 		} else
 			hw->ram_size = t8 * 512;
-	} else /* Yukon */
-		hw->ram_size = t8 ? t8 * 4 : 128;
+	}
+	else if (t8 == 0)
+		hw->ram_size = 0x20000;
+	else
+		hw->ram_size = t8 * 4096;
 
 	hw->intr_mask = IS_HW_ERR;
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c27c7d6..a2070db 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -52,7 +52,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.19"
+#define DRV_VERSION		"1.20"
 #define PFX			DRV_NAME " "
 
 /*
@@ -121,6 +121,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
@@ -134,6 +135,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
 	{ 0 }
 };
 
@@ -156,7 +158,7 @@
 
 static void sky2_set_multicast(struct net_device *dev);
 
-/* Access to external PHY */
+/* Access to PHY via serial interconnect */
 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
 {
 	int i;
@@ -166,13 +168,22 @@
 		    GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
 
 	for (i = 0; i < PHY_RETRIES; i++) {
-		if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+		u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+		if (ctrl == 0xffff)
+			goto io_error;
+
+		if (!(ctrl & GM_SMI_CT_BUSY))
 			return 0;
-		udelay(1);
+
+		udelay(10);
 	}
 
-	printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+	dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
 	return -ETIMEDOUT;
+
+io_error:
+	dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+	return -EIO;
 }
 
 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
@@ -183,23 +194,29 @@
 		    | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
 
 	for (i = 0; i < PHY_RETRIES; i++) {
-		if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+		u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+		if (ctrl == 0xffff)
+			goto io_error;
+
+		if (ctrl & GM_SMI_CT_RD_VAL) {
 			*val = gma_read16(hw, port, GM_SMI_DATA);
 			return 0;
 		}
 
-		udelay(1);
+		udelay(10);
 	}
 
+	dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
 	return -ETIMEDOUT;
+io_error:
+	dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+	return -EIO;
 }
 
-static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 {
 	u16 v;
-
-	if (__gm_phy_read(hw, port, reg, &v) != 0)
-		printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+	__gm_phy_read(hw, port, reg, &v);
 	return v;
 }
 
@@ -273,8 +290,6 @@
 
 	/* disable all GMAC IRQ's */
 	sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
-	/* disable PHY IRQs */
-	gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
 
 	gma_write16(hw, port, GM_MC_ADDR_H1, 0);	/* clear MC hash */
 	gma_write16(hw, port, GM_MC_ADDR_H2, 0);
@@ -1805,29 +1820,6 @@
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (hw->flags & SKY2_HW_NEWER_PHY) {
-		u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-		u16 led = PHY_M_LEDC_LOS_CTRL(1);	/* link active */
-
-		switch(sky2->speed) {
-		case SPEED_10:
-			led |= PHY_M_LEDC_INIT_CTRL(7);
-			break;
-
-		case SPEED_100:
-			led |= PHY_M_LEDC_STA1_CTRL(7);
-			break;
-
-		case SPEED_1000:
-			led |= PHY_M_LEDC_STA0_CTRL(7);
-			break;
-		}
-
-		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
-		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-	}
-
 	if (netif_msg_link(sky2))
 		printk(KERN_INFO PFX
 		       "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
@@ -2247,20 +2239,26 @@
 	do {
 		struct sky2_port *sky2;
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
-		unsigned port = le->css & CSS_LINK_BIT;
+		unsigned port;
 		struct net_device *dev;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
+		u8 opcode = le->opcode;
+
+		if (!(opcode & HW_OWNER))
+			break;
 
 		hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
 
+		port = le->css & CSS_LINK_BIT;
 		dev = hw->dev[port];
 		sky2 = netdev_priv(dev);
 		length = le16_to_cpu(le->length);
 		status = le32_to_cpu(le->status);
 
-		switch (le->opcode & ~HW_OWNER) {
+		le->opcode = 0;
+		switch (opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
 			++rx[port];
 			skb = sky2_receive(dev, length, status);
@@ -2353,7 +2351,7 @@
 		default:
 			if (net_ratelimit())
 				printk(KERN_WARNING PFX
-				       "unknown status opcode 0x%x\n", le->opcode);
+				       "unknown status opcode 0x%x\n", opcode);
 		}
 	} while (hw->st_idx != idx);
 
@@ -2439,13 +2437,26 @@
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
-		int pos = pci_find_aer_capability(hw->pdev);
+		int aer = pci_find_aer_capability(hw->pdev);
 		u32 err;
 
-		pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err);
+		if (aer) {
+			pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
+					      &err);
+			pci_cleanup_aer_uncorrect_error_status(pdev);
+		} else {
+			/* Either AER not configured, or not working
+			 * because of bad MMCONFIG, so just do recover
+			 * manually.
+			 */
+			err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+			sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+				     0xfffffffful);
+		}
+
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
-		pci_cleanup_aer_uncorrect_error_status(pdev);
+
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2791,6 +2802,9 @@
 	sky2_write8(hw, B0_CTST, CS_RST_SET);
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
+	/* allow writes to PCI config */
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
 	/* clear PCI errors, if any */
 	pci_read_config_word(pdev, PCI_STATUS, &status);
 	status |= PCI_STATUS_ERROR_BITS;
@@ -2800,9 +2814,18 @@
 
 	cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (cap) {
-		/* Check for advanced error reporting */
-		pci_cleanup_aer_uncorrect_error_status(pdev);
-		pci_cleanup_aer_correct_error_status(pdev);
+		if (pci_find_aer_capability(pdev)) {
+			/* Check for advanced error reporting */
+			pci_cleanup_aer_uncorrect_error_status(pdev);
+			pci_cleanup_aer_correct_error_status(pdev);
+		} else {
+			dev_warn(&pdev->dev,
+				"PCI Express Advanced Error Reporting"
+				" not configured or MMCONFIG problem?\n");
+
+			sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+				     0xfffffffful);
+		}
 
 		/* If error bit is stuck on ignore it */
 		if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
@@ -3974,7 +3997,8 @@
 	dev->tx_timeout = sky2_tx_timeout;
 	dev->watchdog_timeo = TX_WATCHDOG;
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = sky2_netpoll;
+	if (port == 0)
+		dev->poll_controller = sky2_netpoll;
 #endif
 
 	sky2 = netdev_priv(dev);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 49ee264..69525fd 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -247,7 +247,8 @@
 	B3_PA_CTRL	= 0x01f0,
 	B3_PA_TEST	= 0x01f2,
 
-	Y2_CFG_SPC	= 0x1c00,
+	Y2_CFG_SPC	= 0x1c00,	/* PCI config space region */
+	Y2_CFG_AER      = 0x1d00,	/* PCI Advanced Error Report region */
 };
 
 /*	B0_CTST			16 bit	Control/Status register */
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 335b7cc..251a3ce 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -1218,14 +1218,8 @@
 		return 0;
 	/* VSV changes end */
 #endif
-
-	/* Allow stty to read, but not set, the serial port */
-	case TCGETS:
-	case TCGETA:
-		return n_tty_ioctl(tty, file, cmd, arg);
-
 	default:
-		return -ENOIOCTLCMD;
+		return tty_mode_ioctl(tty, file, cmd, arg);
 	}
 }
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 729fd28..db34e1e 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -224,6 +224,21 @@
 	}
 }
 
+#elif defined(CONFIG_MACH_ZYLONITE)
+
+#define SMC_CAN_USE_8BIT        1
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       0
+#define SMC_IO_SHIFT            0
+#define SMC_NOWAIT              1
+#define SMC_USE_PXA_DMA		1
+#define SMC_inb(a, r)           readb((a) + (r))
+#define SMC_inw(a, r)           readw((a) + (r))
+#define SMC_insw(a, r, p, l)    insw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)   outsw((a) + (r), p, l)
+#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)       writew(v, (a) + (r))
+
 #elif	defined(CONFIG_ARCH_OMAP)
 
 /* We can only do 16-bit reads and writes in the static memory space. */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 53b8344..f6fedcc 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -2333,10 +2333,10 @@
 {
 	struct gem *gp = dev->priv;
 
-	napi_disable(&gp->napi);
-
 	mutex_lock(&gp->pm_mutex);
 
+	napi_disable(&gp->napi);
+
 	gp->opened = 0;
 	if (!gp->asleep)
 		gem_do_stop(dev, 0);
@@ -2355,8 +2355,6 @@
 
 	mutex_lock(&gp->pm_mutex);
 
-	napi_disable(&gp->napi);
-
 	printk(KERN_INFO "%s: suspending, WakeOnLan %s\n",
 	       dev->name,
 	       (gp->wake_on_lan && gp->opened) ? "enabled" : "disabled");
@@ -2370,6 +2368,8 @@
 
 	/* If the driver is opened, we stop the MAC */
 	if (gp->opened) {
+		napi_disable(&gp->napi);
+
 		/* Stop traffic, mark us closed */
 		netif_device_detach(dev);
 
@@ -2460,6 +2460,7 @@
 		/* Re-attach net device */
 		netif_device_attach(dev);
 
+		napi_enable(&gp->napi);
 	}
 
 	spin_lock_irqsave(&gp->lock, flags);
@@ -2479,8 +2480,6 @@
 	spin_unlock(&gp->tx_lock);
 	spin_unlock_irqrestore(&gp->lock, flags);
 
-	napi_enable(&gp->napi);
-
 	mutex_unlock(&gp->pm_mutex);
 
 	return 0;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 120c8af..9cc13dd 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1281,7 +1281,7 @@
 		skb->dev = dev;
 
 		/* Because we reserve afterwards. */
-		skb_put(skb, (ETH_FRAME_LEN + RX_OFFSET));
+		skb_put(skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
 		hme_write_rxd(hp, &hb->happy_meal_rxd[i],
 			      (RXFLAG_OWN | ((RX_BUF_ALLOC_SIZE - RX_OFFSET) << 16)),
 			      hme_dma_map(hp, skb->data, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE));
@@ -1700,6 +1700,11 @@
 	HMD(("tx old[%08x] and rx [%08x] ON!\n",
 	     hme_read32(hp, bregs + BMAC_TXCFG),
 	     hme_read32(hp, bregs + BMAC_RXCFG)));
+
+	/* Set larger TX/RX size to allow for 802.1q */
+	hme_write32(hp, bregs + BMAC_TXMAX, ETH_FRAME_LEN + 8);
+	hme_write32(hp, bregs + BMAC_RXMAX, ETH_FRAME_LEN + 8);
+
 	hme_write32(hp, bregs + BMAC_TXCFG,
 		    hme_read32(hp, bregs + BMAC_TXCFG) | BIGMAC_TXCFG_ENABLE);
 	hme_write32(hp, bregs + BMAC_RXCFG,
@@ -2039,7 +2044,7 @@
 			hme_dma_unmap(hp, dma_addr, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE);
 			hp->rx_skbs[elem] = new_skb;
 			new_skb->dev = dev;
-			skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET));
+			skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
 			hme_write_rxd(hp, this,
 				      (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)),
 				      hme_dma_map(hp, new_skb->data, RX_BUF_ALLOC_SIZE, DMA_FROMDEVICE));
@@ -2809,8 +2814,8 @@
 	dev->watchdog_timeo = 5*HZ;
 	dev->ethtool_ops = &hme_ethtool_ops;
 
-	/* Happy Meal can do it all... except VLAN. */
-	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_VLAN_CHALLENGED;
+	/* Happy Meal can do it all... */
+	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 
 	dev->irq = sdev->irqs[0];
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 4e1b84e..21230c9 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -2168,10 +2168,10 @@
 {
 	struct bdx_priv *priv = netdev->priv;
 
-	strncat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver));
-	strncat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version));
-	strncat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
-	strncat(drvinfo->bus_info, pci_name(priv->pdev),
+	strlcat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver));
+	strlcat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version));
+	strlcat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+	strlcat(drvinfo->bus_info, pci_name(priv->pdev),
 		sizeof(drvinfo->bus_info));
 
 	drvinfo->n_stats = ((priv->stats_flag) ?
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 09440d7..4942f7d 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.85"
-#define DRV_MODULE_RELDATE	"October 18, 2007"
+#define DRV_MODULE_VERSION	"3.86"
+#define DRV_MODULE_RELDATE	"November 9, 2007"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1106,6 +1106,24 @@
 	if (err)
 		return err;
 
+	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+		u32 val;
+
+		val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
+		if ((val & CPMU_LSPD_1000MB_MACCLK_MASK) ==
+		    CPMU_LSPD_1000MB_MACCLK_12_5) {
+			val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
+			udelay(40);
+			tw32_f(TG3_CPMU_LSPD_1000MB_CLK, val);
+		}
+
+		/* Disable GPHY autopowerdown. */
+		tg3_writephy(tp, MII_TG3_MISC_SHDW,
+			     MII_TG3_MISC_SHDW_WREN |
+			     MII_TG3_MISC_SHDW_APD_SEL |
+			     MII_TG3_MISC_SHDW_APD_WKTM_84MS);
+	}
+
 out:
 	if (tp->tg3_flags2 & TG3_FLG2_PHY_ADC_BUG) {
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
@@ -1297,6 +1315,8 @@
 
 static void tg3_power_down_phy(struct tg3 *tp)
 {
+	u32 val;
+
 	if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
 			u32 sg_dig_ctrl = tr32(SG_DIG_CTRL);
@@ -1311,8 +1331,6 @@
 	}
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-		u32 val;
-
 		tg3_bmcr_reset(tp);
 		val = tr32(GRC_MISC_CFG);
 		tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
@@ -1332,6 +1350,14 @@
 	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 &&
 	     (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
 		return;
+
+	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+		val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
+		val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
+		val |= CPMU_LSPD_1000MB_MACCLK_12_5;
+		tw32_f(TG3_CPMU_LSPD_1000MB_CLK, val);
+	}
+
 	tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
 }
 
@@ -3126,6 +3152,23 @@
 		err = tg3_setup_copper_phy(tp, force_reset);
 	}
 
+	if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
+		u32 val, scale;
+
+		val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
+		if (val == CPMU_CLCK_STAT_MAC_CLCK_62_5)
+			scale = 65;
+		else if (val == CPMU_CLCK_STAT_MAC_CLCK_6_25)
+			scale = 6;
+		else
+			scale = 12;
+
+		val = tr32(GRC_MISC_CFG) & ~GRC_MISC_CFG_PRESCALAR_MASK;
+		val |= (scale << GRC_MISC_CFG_PRESCALAR_SHIFT);
+		tw32(GRC_MISC_CFG, val);
+	}
+
 	if (tp->link_config.active_speed == SPEED_1000 &&
 	    tp->link_config.active_duplex == DUPLEX_HALF)
 		tw32(MAC_TX_LENGTHS,
@@ -5054,12 +5097,15 @@
 
 	pci_write_config_word(tp->pdev, PCI_COMMAND, tp->pci_cmd);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
+	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+		pcie_set_readrq(tp->pdev, 4096);
+	else {
 		pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
 				      tp->pci_cacheline_sz);
 		pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
 				      tp->pci_lat_timer);
 	}
+
 	/* Make sure PCI-X relaxed ordering bit is clear. */
 	if (tp->pcix_cap) {
 		u16 pcix_cmd;
@@ -6343,10 +6389,26 @@
 
 	tg3_write_sig_legacy(tp, RESET_KIND_INIT);
 
-	if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0) {
+	if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5784_A1) {
 		val = tr32(TG3_CPMU_CTRL);
 		val &= ~(CPMU_CTRL_LINK_AWARE_MODE | CPMU_CTRL_LINK_IDLE_MODE);
 		tw32(TG3_CPMU_CTRL, val);
+
+		val = tr32(TG3_CPMU_LSPD_10MB_CLK);
+		val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
+		val |= CPMU_LSPD_10MB_MACCLK_6_25;
+		tw32(TG3_CPMU_LSPD_10MB_CLK, val);
+
+		val = tr32(TG3_CPMU_LNK_AWARE_PWRMD);
+		val &= ~CPMU_LNK_AWARE_MACCLK_MASK;
+		val |= CPMU_LNK_AWARE_MACCLK_6_25;
+		tw32(TG3_CPMU_LNK_AWARE_PWRMD, val);
+
+		val = tr32(TG3_CPMU_HST_ACC);
+		val &= ~CPMU_HST_ACC_MACCLK_MASK;
+		val |= CPMU_HST_ACC_MACCLK_6_25;
+		tw32(TG3_CPMU_HST_ACC, val);
 	}
 
 	/* This works around an issue with Athlon chipsets on
@@ -7365,10 +7427,6 @@
 		} else if (pci_enable_msi(tp->pdev) == 0) {
 			u32 msi_mode;
 
-			/* Hardware bug - MSI won't work if INTX disabled. */
-			if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
-				pci_intx(tp->pdev, 1);
-
 			msi_mode = tr32(MSGINT_MODE);
 			tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
 			tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
@@ -8271,7 +8329,7 @@
 				  SUPPORTED_100baseT_Full |
 				  SUPPORTED_10baseT_Half |
 				  SUPPORTED_10baseT_Full |
-				  SUPPORTED_MII);
+				  SUPPORTED_TP);
 		cmd->port = PORT_TP;
 	} else {
 		cmd->supported |= SUPPORTED_FIBRE;
@@ -8668,7 +8726,9 @@
 }
 
 #define NVRAM_TEST_SIZE 0x100
-#define NVRAM_SELFBOOT_FORMAT1_SIZE 0x14
+#define NVRAM_SELFBOOT_FORMAT1_0_SIZE	0x14
+#define NVRAM_SELFBOOT_FORMAT1_2_SIZE	0x18
+#define NVRAM_SELFBOOT_FORMAT1_3_SIZE	0x1c
 #define NVRAM_SELFBOOT_HW_SIZE 0x20
 #define NVRAM_SELFBOOT_DATA_SIZE 0x1c
 
@@ -8683,9 +8743,22 @@
 	if (magic == TG3_EEPROM_MAGIC)
 		size = NVRAM_TEST_SIZE;
 	else if ((magic & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW) {
-		if ((magic & 0xe00000) == 0x200000)
-			size = NVRAM_SELFBOOT_FORMAT1_SIZE;
-		else
+		if ((magic & TG3_EEPROM_SB_FORMAT_MASK) ==
+		    TG3_EEPROM_SB_FORMAT_1) {
+			switch (magic & TG3_EEPROM_SB_REVISION_MASK) {
+			case TG3_EEPROM_SB_REVISION_0:
+				size = NVRAM_SELFBOOT_FORMAT1_0_SIZE;
+				break;
+			case TG3_EEPROM_SB_REVISION_2:
+				size = NVRAM_SELFBOOT_FORMAT1_2_SIZE;
+				break;
+			case TG3_EEPROM_SB_REVISION_3:
+				size = NVRAM_SELFBOOT_FORMAT1_3_SIZE;
+				break;
+			default:
+				return 0;
+			}
+		} else
 			return 0;
 	} else if ((magic & TG3_EEPROM_MAGIC_HW_MSK) == TG3_EEPROM_MAGIC_HW)
 		size = NVRAM_SELFBOOT_HW_SIZE;
@@ -8712,8 +8785,17 @@
 	    TG3_EEPROM_MAGIC_FW) {
 		u8 *buf8 = (u8 *) buf, csum8 = 0;
 
-		for (i = 0; i < size; i++)
-			csum8 += buf8[i];
+		if ((cpu_to_be32(buf[0]) & TG3_EEPROM_SB_REVISION_MASK) ==
+		    TG3_EEPROM_SB_REVISION_2) {
+			/* For rev 2, the csum doesn't include the MBA. */
+			for (i = 0; i < TG3_EEPROM_SB_F1R2_MBA_OFF; i++)
+				csum8 += buf8[i];
+			for (i = TG3_EEPROM_SB_F1R2_MBA_OFF + 4; i < size; i++)
+				csum8 += buf8[i];
+		} else {
+			for (i = 0; i < size; i++)
+				csum8 += buf8[i];
+		}
 
 		if (csum8 == 0) {
 			err = 0;
@@ -9297,7 +9379,7 @@
 	if (err)
 		return TG3_LOOPBACK_FAILED;
 
-	if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
 		int i;
 		u32 status;
 
@@ -9314,17 +9396,17 @@
 		if (status != CPMU_MUTEX_GNT_DRIVER)
 			return TG3_LOOPBACK_FAILED;
 
-		cpmuctrl = tr32(TG3_CPMU_CTRL);
-
 		/* Turn off power management based on link speed. */
+		cpmuctrl = tr32(TG3_CPMU_CTRL);
 		tw32(TG3_CPMU_CTRL,
-		     cpmuctrl & ~CPMU_CTRL_LINK_SPEED_MODE);
+		     cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
+				  CPMU_CTRL_LINK_AWARE_MODE));
 	}
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
 
-	if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+	if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
 		tw32(TG3_CPMU_CTRL, cpmuctrl);
 
 		/* Release the mutex */
@@ -10545,6 +10627,10 @@
 		    tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
 			tp->led_ctrl = LED_CTRL_MODE_PHY_2;
 
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
+		    tp->pci_chip_rev_id == CHIPREV_ID_5784_A1)
+			tp->led_ctrl = LED_CTRL_MODE_MAC;
+
 		if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
 			tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
 			if ((tp->pdev->subsystem_vendor ==
@@ -10863,7 +10949,7 @@
 	}
 
 	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
-	     (tp->tg3_flags & TG3_FLG3_ENABLE_APE))
+	     (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
 		return;
 
 	for (offset = TG3_NVM_DIR_START;
@@ -11131,6 +11217,9 @@
 	pcie_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_EXP);
 	if (pcie_cap != 0) {
 		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
+
+		pcie_set_readrq(tp->pdev, 4096);
+
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 			u16 lnkctl;
 
@@ -11311,9 +11400,16 @@
 	}
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
 		tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
 
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
+		    tp->pci_chip_rev_id == CHIPREV_ID_5784_A1 ||
+		    tp->pci_chip_rev_id == CHIPREV_ID_5761_A0 ||
+		    tp->pci_chip_rev_id == CHIPREV_ID_5761_A1)
+			tp->tg3_flags3 |= TG3_FLG3_5761_5784_AX_FIXES;
+	}
+
 	/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
 	 * GPIO1 driven high will bring 5700's external PHY out of reset.
 	 * It is also used as eeprom write protect on LOMs.
@@ -12468,43 +12564,6 @@
 		goto err_out_iounmap;
 	}
 
-	/*
-	 * Reset chip in case UNDI or EFI driver did not shutdown
-	 * DMA self test will enable WDMAC and we'll see (spurious)
-	 * pending DMA on the PCI bus at that point.
-	 */
-	if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
-	    (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
-		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
-		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	}
-
-	err = tg3_test_dma(tp);
-	if (err) {
-		printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
-		goto err_out_iounmap;
-	}
-
-	/* Tigon3 can do ipv4 only... and some chips have buggy
-	 * checksumming.
-	 */
-	if ((tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) == 0) {
-		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
-			dev->features |= NETIF_F_IPV6_CSUM;
-
-		tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
-	} else
-		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
-
-	/* flow control autonegotiation is default behavior */
-	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
-
-	tg3_init_coal(tp);
-
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
 		if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
 			printk(KERN_ERR PFX "Cannot find proper PCI device "
@@ -12527,6 +12586,43 @@
 		tg3_ape_lock_init(tp);
 	}
 
+	/*
+	 * Reset chip in case UNDI or EFI driver did not shutdown
+	 * DMA self test will enable WDMAC and we'll see (spurious)
+	 * pending DMA on the PCI bus at that point.
+	 */
+	if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
+	    (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
+		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+	}
+
+	err = tg3_test_dma(tp);
+	if (err) {
+		printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+		goto err_out_apeunmap;
+	}
+
+	/* Tigon3 can do ipv4 only... and some chips have buggy
+	 * checksumming.
+	 */
+	if ((tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) == 0) {
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
+			dev->features |= NETIF_F_IPV6_CSUM;
+
+		tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
+	} else
+		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
+
+	/* flow control autonegotiation is default behavior */
+	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+
+	tg3_init_coal(tp);
+
 	pci_set_drvdata(pdev, dev);
 
 	err = register_netdev(dev);
@@ -12681,11 +12777,6 @@
 	if (err)
 		return err;
 
-	/* Hardware bug - MSI won't work if INTX disabled. */
-	if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
-	    (tp->tg3_flags2 & TG3_FLG2_USING_MSI))
-		pci_intx(tp->pdev, 1);
-
 	netif_device_attach(dev);
 
 	tg3_full_lock(tp, 0);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 1d5b2a3..da18fb2 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -109,6 +109,9 @@
 #define  CHIPREV_ID_5714_A2		 0x9002
 #define  CHIPREV_ID_5906_A1		 0xc001
 #define  CHIPREV_ID_5784_A0		 0x5784000
+#define  CHIPREV_ID_5784_A1		 0x5784001
+#define  CHIPREV_ID_5761_A0		 0x5761000
+#define  CHIPREV_ID_5761_A1		 0x5761001
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
@@ -856,7 +859,31 @@
 #define  CPMU_CTRL_LINK_IDLE_MODE	 0x00000200
 #define  CPMU_CTRL_LINK_AWARE_MODE	 0x00000400
 #define  CPMU_CTRL_LINK_SPEED_MODE	 0x00004000
-/* 0x3604 --> 0x365c unused */
+#define TG3_CPMU_LSPD_10MB_CLK		0x00003604
+#define  CPMU_LSPD_10MB_MACCLK_MASK	 0x001f0000
+#define  CPMU_LSPD_10MB_MACCLK_6_25	 0x00130000
+/* 0x3608 --> 0x360c unused */
+
+#define TG3_CPMU_LSPD_1000MB_CLK	0x0000360c
+#define  CPMU_LSPD_1000MB_MACCLK_62_5	 0x00000000
+#define  CPMU_LSPD_1000MB_MACCLK_12_5	 0x00110000
+#define  CPMU_LSPD_1000MB_MACCLK_MASK	 0x001f0000
+#define TG3_CPMU_LNK_AWARE_PWRMD	0x00003610
+#define  CPMU_LNK_AWARE_MACCLK_MASK	 0x001f0000
+#define  CPMU_LNK_AWARE_MACCLK_6_25	 0x00130000
+/* 0x3614 --> 0x361c unused */
+
+#define TG3_CPMU_HST_ACC		0x0000361c
+#define  CPMU_HST_ACC_MACCLK_MASK	 0x001f0000
+#define  CPMU_HST_ACC_MACCLK_6_25	 0x00130000
+/* 0x3620 --> 0x3630 unused */
+
+#define TG3_CPMU_CLCK_STAT		0x00003630
+#define  CPMU_CLCK_STAT_MAC_CLCK_MASK	 0x001f0000
+#define  CPMU_CLCK_STAT_MAC_CLCK_62_5	 0x00000000
+#define  CPMU_CLCK_STAT_MAC_CLCK_12_5	 0x00110000
+#define  CPMU_CLCK_STAT_MAC_CLCK_6_25	 0x00130000
+/* 0x3634 --> 0x365c unused */
 
 #define TG3_CPMU_MUTEX_REQ		0x0000365c
 #define  CPMU_MUTEX_REQ_DRIVER		 0x00001000
@@ -1537,6 +1564,12 @@
 #define TG3_EEPROM_MAGIC		0x669955aa
 #define TG3_EEPROM_MAGIC_FW		0xa5000000
 #define TG3_EEPROM_MAGIC_FW_MSK		0xff000000
+#define TG3_EEPROM_SB_FORMAT_MASK	0x00e00000
+#define TG3_EEPROM_SB_FORMAT_1		0x00200000
+#define TG3_EEPROM_SB_REVISION_MASK	0x001f0000
+#define TG3_EEPROM_SB_REVISION_0	0x00000000
+#define TG3_EEPROM_SB_REVISION_2	0x00020000
+#define TG3_EEPROM_SB_REVISION_3	0x00030000
 #define TG3_EEPROM_MAGIC_HW		0xabcd
 #define TG3_EEPROM_MAGIC_HW_MSK		0xffff
 
@@ -1691,6 +1724,12 @@
 #define MII_TG3_ISTAT			0x1a /* IRQ status register */
 #define MII_TG3_IMASK			0x1b /* IRQ mask register */
 
+#define MII_TG3_MISC_SHDW		0x1c
+#define MII_TG3_MISC_SHDW_WREN		0x8000
+#define MII_TG3_MISC_SHDW_APD_SEL	0x2800
+
+#define MII_TG3_MISC_SHDW_APD_WKTM_84MS	0x0001
+
 /* ISTAT/IMASK event bits */
 #define MII_TG3_INT_LINKCHG		0x0002
 #define MII_TG3_INT_SPEEDCHG		0x0004
@@ -1747,6 +1786,8 @@
 /* APE convenience enumerations. */
 #define TG3_APE_LOCK_MEM                4
 
+#define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
+
 
 /* There are two ways to manage the TX descriptors on the tigon3.
  * Either the descriptors are in host DMA'able memory, or they
@@ -2352,6 +2393,7 @@
 	u32				tg3_flags3;
 #define TG3_FLG3_NO_NVRAM_ADDR_TRANS	0x00000001
 #define TG3_FLG3_ENABLE_APE		0x00000002
+#define TG3_FLG3_5761_5784_AX_FIXES	0x00000004
 
 	struct timer_list		timer;
 	u16				timer_counter;
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 49d7a29..20ac150 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -24,8 +24,7 @@
 	  will say Y here.) Do read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
 
 config TULIP
@@ -42,8 +41,7 @@
 	  will say Y here.) Do read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called tulip.
 
 config TULIP_MWI
@@ -104,8 +102,7 @@
 	  information is contained in
 	  <file:Documentation/networking/de4x5.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called de4x5.
 
 config WINBOND_840
@@ -129,8 +126,7 @@
 	  (Ethernet) card, say Y.  Some information is contained in the file
 	  <file:Documentation/networking/dmfe.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called dmfe.
 
 config ULI526X
@@ -141,8 +137,7 @@
 	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
 	  (<http://www.uli.com.tw/>).
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called uli526x.
 	  
 config PCMCIA_XIRCOM
@@ -154,8 +149,7 @@
 	  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
 	  ASIX.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called xircom_cb.  If unsure, say N.
 
 config PCMCIA_XIRTULIP
@@ -168,8 +162,7 @@
 	  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
 	  ASIX.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called xircom_tulip_cb.  If unsure, say N.
 
 endif # NET_TULIP
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 5a96d74..a12c9c4 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -93,13 +93,9 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtl8150.
 
-config USB_USBNET_MII
-	tristate
-	default n
-
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
-	select MII if USB_USBNET_MII != n
+	select MII
 	---help---
 	  This driver supports several kinds of network links over USB,
 	  with "minidrivers" built around a common network driver core
@@ -135,7 +131,6 @@
 	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
 	depends on USB_USBNET && NET_ETHERNET
 	select CRC32
-	select USB_USBNET_MII
 	default y
 	help
 	  This option adds support for ASIX AX88xxx based USB 2.0
@@ -190,7 +185,6 @@
 	tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
 	depends on USB_USBNET
 	select CRC32
-	select USB_USBNET_MII
 	help
 	  This option adds support for Davicom DM9601 based USB 1.1
 	  10/100 Ethernet adapters.
@@ -225,7 +219,6 @@
 config USB_NET_MCS7830
 	tristate "MosChip MCS7830 based Ethernet adapters"
 	depends on USB_USBNET
-	select USB_USBNET_MII
 	help
 	  Choose this option if you're using a 10/100 Ethernet USB2
 	  adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index acd5f1c..8ed1fc5 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -683,9 +683,6 @@
  * they'll probably want to use this base set.
  */
 
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
-#define HAVE_MII
-
 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -744,8 +741,6 @@
 }
 EXPORT_SYMBOL_GPL(usbnet_nway_reset);
 
-#endif	/* HAVE_MII */
-
 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -776,12 +771,10 @@
 
 /* drivers may override default ethtool_ops in their bind() routine */
 static struct ethtool_ops usbnet_ethtool_ops = {
-#ifdef	HAVE_MII
 	.get_settings		= usbnet_get_settings,
 	.set_settings		= usbnet_set_settings,
 	.get_link		= usbnet_get_link,
 	.nway_reset		= usbnet_nway_reset,
-#endif
 	.get_drvinfo		= usbnet_get_drvinfo,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 5c4a92d..450e29d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1963,6 +1963,11 @@
 		return -EINVAL;
 	}
 
+	if (!netif_running(dev)) {
+		dev->mtu = new_mtu;
+		return 0;
+	}
+
 	if (new_mtu != oldmtu) {
 		spin_lock_irqsave(&vptr->lock, flags);
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e396c9d..a75be57 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -146,6 +146,7 @@
 	struct scatterlist sg[1+MAX_SKB_FRAGS];
 	int num, err;
 
+	sg_init_table(sg, 1+MAX_SKB_FRAGS);
 	for (;;) {
 		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
 		if (unlikely(!skb))
@@ -231,6 +232,8 @@
 	const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
 	DECLARE_MAC_BUF(mac);
 
+	sg_init_table(sg, 1+MAX_SKB_FRAGS);
+
 	pr_debug("%s: xmit %p %s\n", dev->name, skb, print_mac(mac, dest));
 
 	free_old_xmit_skbs(vi);
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index c48b1cc..1e89d4d 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -719,12 +719,8 @@
 		return 0;
 	case SIOCSIFHWADDR:
 		return -EINVAL;
-	/* Allow stty to read, but not set, the serial port */
-	case TCGETS:
-	case TCGETA:
-		return n_tty_ioctl(tty, file, cmd, arg);
 	default:
-		return -ENOIOCTLCMD;
+		return tty_mode_ioctl(tty, file, cmd, arg);
 	}
 }
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index dae5c8d..2b733c5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -325,7 +325,7 @@
 	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
 	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
 	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
-	  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+	  IPW2011, and Symbol Spectrum24 High Rate amongst others.
 
 	  This option includes the guts of the driver, but in order to
 	  actually use a card you will also need to enable support for PCMCIA
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index e3c573e..fdbc351 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -61,16 +61,18 @@
 
 	  If unsure, say N.
 
-# LED support
+# This config option automatically enables b43 LEDS support,
+# if it's possible.
 config B43_LEDS
 	bool
-	depends on B43 && MAC80211_LEDS
+	depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
 	default y
 
-# RFKILL support
+# This config option automatically enables b43 RFKILL support,
+# if it's possible.
 config B43_RFKILL
 	bool
-	depends on B43 && RFKILL && RFKILL_INPUT && INPUT_POLLDEV
+	depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43)
 	default y
 
 config B43_DEBUG
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 734e70e..ef0075d 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -128,7 +128,7 @@
 	__le16 *le16buf = (__le16 *)buf;
 
 	for (i = 0; i < 0x1000; i++) {
-		if (bufsize <= 0)
+		if (bufsize < sizeof(tmp))
 			break;
 		tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i);
 		le16buf[i] = cpu_to_le16(tmp);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5058e60..2b17c1d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2985,6 +2985,16 @@
 
 	if (b43_status(dev) < B43_STAT_STARTED)
 		return;
+
+	/* Disable and sync interrupts. We must do this before than
+	 * setting the status to INITIALIZED, as the interrupt handler
+	 * won't care about IRQs then. */
+	spin_lock_irqsave(&wl->irq_lock, flags);
+	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+	b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* flush */
+	spin_unlock_irqrestore(&wl->irq_lock, flags);
+	b43_synchronize_irq(dev);
+
 	b43_set_status(dev, B43_STAT_INITIALIZED);
 
 	mutex_unlock(&wl->mutex);
@@ -2995,13 +3005,6 @@
 
 	ieee80211_stop_queues(wl->hw);	//FIXME this could cause a deadlock, as mac80211 seems buggy.
 
-	/* Disable and sync interrupts. */
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
-	b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* flush */
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43_synchronize_irq(dev);
-
 	b43_mac_suspend(dev);
 	free_irq(dev->dev->irq, dev);
 	b43dbg(wl, "Wireless interface stopped\n");
@@ -3661,7 +3664,6 @@
 
 static void b43_wireless_core_detach(struct b43_wldev *dev)
 {
-	b43_rfkill_free(dev);
 	/* We release firmware that late to not be required to re-request
 	 * is all the time when we reinit the core. */
 	b43_release_firmware(dev);
@@ -3747,7 +3749,6 @@
 	if (!wl->current_dev)
 		wl->current_dev = dev;
 	INIT_WORK(&dev->restart_work, b43_chip_reset);
-	b43_rfkill_alloc(dev);
 
 	b43_radio_turn_off(dev, 1);
 	b43_switch_analog(dev, 0);
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b242a9a..b79a6bd 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -65,12 +65,12 @@
 	tuple_t tuple;
 	cisparse_t parse;
 	int err = -ENOMEM;
-	int res;
+	int res = 0;
 	unsigned char buf[64];
 
 	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
 	if (!ssb)
-		goto out;
+		goto out_error;
 
 	err = -ENODEV;
 	tuple.DesiredTuple = CISTPL_CONFIG;
@@ -96,10 +96,12 @@
 	dev->io.NumPorts2 = 0;
 	dev->io.Attributes2 = 0;
 
-	win.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+	win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
+			 WIN_ENABLE | WIN_DATA_WIDTH_16 |
+			 WIN_USE_WAIT;
 	win.Base = 0;
 	win.Size = SSB_CORE_SIZE;
-	win.AccessSpeed = 1000;
+	win.AccessSpeed = 250;
 	res = pcmcia_request_window(&dev, &win, &dev->win);
 	if (res != CS_SUCCESS)
 		goto err_kfree_ssb;
@@ -108,21 +110,34 @@
 	mem.Page = 0;
 	res = pcmcia_map_mem_page(dev->win, &mem);
 	if (res != CS_SUCCESS)
-		goto err_kfree_ssb;
+		goto err_disable;
+
+	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
+	dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+	dev->irq.Handler = NULL; /* The handler is registered later. */
+	dev->irq.Instance = NULL;
+	res = pcmcia_request_irq(dev, &dev->irq);
+	if (res != CS_SUCCESS)
+		goto err_disable;
 
 	res = pcmcia_request_configuration(dev, &dev->conf);
 	if (res != CS_SUCCESS)
 		goto err_disable;
 
 	err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
+	if (err)
+		goto err_disable;
 	dev->priv = ssb;
 
-      out:
-	return err;
-      err_disable:
+	return 0;
+
+err_disable:
 	pcmcia_disable_device(dev);
-      err_kfree_ssb:
+err_kfree_ssb:
 	kfree(ssb);
+out_error:
+	printk(KERN_ERR "b43-pcmcia: Initialization failed (%d, %d)\n",
+	       res, err);
 	return err;
 }
 
@@ -131,22 +146,21 @@
 	struct ssb_bus *ssb = dev->priv;
 
 	ssb_bus_unregister(ssb);
-	pcmcia_release_window(dev->win);
 	pcmcia_disable_device(dev);
 	kfree(ssb);
 	dev->priv = NULL;
 }
 
 static struct pcmcia_driver b43_pcmcia_driver = {
-	.owner = THIS_MODULE,
-	.drv = {
-		.name = "b43-pcmcia",
-		},
-	.id_table = b43_pcmcia_tbl,
-	.probe = b43_pcmcia_probe,
-	.remove = b43_pcmcia_remove,
-	.suspend = b43_pcmcia_suspend,
-	.resume = b43_pcmcia_resume,
+	.owner		= THIS_MODULE,
+	.drv		= {
+				.name = "b43-pcmcia",
+			},
+	.id_table	= b43_pcmcia_tbl,
+	.probe		= b43_pcmcia_probe,
+	.remove		= __devexit_p(b43_pcmcia_remove),
+	.suspend	= b43_pcmcia_suspend,
+	.resume		= b43_pcmcia_resume,
 };
 
 int b43_pcmcia_init(void)
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 800e0a6..9b1f905 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -47,32 +47,35 @@
 	struct b43_wldev *dev = poll_dev->private;
 	struct b43_wl *wl = dev->wl;
 	bool enabled;
+	bool report_change = 0;
 
 	mutex_lock(&wl->mutex);
 	B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
 	enabled = b43_is_hw_radio_enabled(dev);
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
+		report_change = 1;
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
-		mutex_unlock(&wl->mutex);
+	}
+	mutex_unlock(&wl->mutex);
+
+	if (unlikely(report_change))
 		input_report_key(poll_dev->input, KEY_WLAN, enabled);
-	} else
-		mutex_unlock(&wl->mutex);
 }
 
-/* Called when the RFKILL toggled in software.
- * This is called without locking. */
+/* Called when the RFKILL toggled in software. */
 static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
 {
 	struct b43_wldev *dev = data;
 	struct b43_wl *wl = dev->wl;
 	int err = 0;
 
-	mutex_lock(&wl->mutex);
-	if (b43_status(dev) < B43_STAT_INITIALIZED)
-		goto out_unlock;
+	if (!wl->rfkill.registered)
+		return 0;
 
+	mutex_lock(&wl->mutex);
+	B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
 	switch (state) {
 	case RFKILL_STATE_ON:
 		if (!dev->radio_hw_enable) {
@@ -89,7 +92,6 @@
 			b43_radio_turn_off(dev, 0);
 		break;
 	}
-
 out_unlock:
 	mutex_unlock(&wl->mutex);
 
@@ -98,11 +100,11 @@
 
 char * b43_rfkill_led_name(struct b43_wldev *dev)
 {
-	struct b43_wl *wl = dev->wl;
+	struct b43_rfkill *rfk = &(dev->wl->rfkill);
 
-	if (!wl->rfkill.rfkill)
+	if (!rfk->registered)
 		return NULL;
-	return rfkill_get_led_name(wl->rfkill.rfkill);
+	return rfkill_get_led_name(rfk->rfkill);
 }
 
 void b43_rfkill_init(struct b43_wldev *dev)
@@ -111,53 +113,13 @@
 	struct b43_rfkill *rfk = &(wl->rfkill);
 	int err;
 
-	if (rfk->rfkill) {
-		err = rfkill_register(rfk->rfkill);
-		if (err) {
-			b43warn(wl, "Failed to register RF-kill button\n");
-			goto err_free_rfk;
-		}
-	}
-	if (rfk->poll_dev) {
-		err = input_register_polled_device(rfk->poll_dev);
-		if (err) {
-			b43warn(wl, "Failed to register RF-kill polldev\n");
-			goto err_free_polldev;
-		}
-	}
-
-	return;
-err_free_rfk:
-	rfkill_free(rfk->rfkill);
-	rfk->rfkill = NULL;
-err_free_polldev:
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (rfk->poll_dev)
-		input_unregister_polled_device(rfk->poll_dev);
-	if (rfk->rfkill)
-		rfkill_unregister(rfk->rfkill);
-}
-
-void b43_rfkill_alloc(struct b43_wldev *dev)
-{
-	struct b43_wl *wl = dev->wl;
-	struct b43_rfkill *rfk = &(wl->rfkill);
-
-	snprintf(rfk->name, sizeof(rfk->name),
-		 "b43-%s", wiphy_name(wl->hw->wiphy));
+	rfk->registered = 0;
 
 	rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-	if (!rfk->rfkill) {
-		b43warn(wl, "Failed to allocate RF-kill button\n");
-		return;
-	}
+	if (!rfk->rfkill)
+		goto out_error;
+	snprintf(rfk->name, sizeof(rfk->name),
+		 "b43-%s", wiphy_name(wl->hw->wiphy));
 	rfk->rfkill->name = rfk->name;
 	rfk->rfkill->state = RFKILL_STATE_ON;
 	rfk->rfkill->data = dev;
@@ -165,18 +127,45 @@
 	rfk->rfkill->user_claim_unsupported = 1;
 
 	rfk->poll_dev = input_allocate_polled_device();
-	if (rfk->poll_dev) {
-		rfk->poll_dev->private = dev;
-		rfk->poll_dev->poll = b43_rfkill_poll;
-		rfk->poll_dev->poll_interval = 1000; /* msecs */
-	} else
-		b43warn(wl, "Failed to allocate RF-kill polldev\n");
+	if (!rfk->poll_dev)
+		goto err_free_rfk;
+	rfk->poll_dev->private = dev;
+	rfk->poll_dev->poll = b43_rfkill_poll;
+	rfk->poll_dev->poll_interval = 1000; /* msecs */
+
+	err = rfkill_register(rfk->rfkill);
+	if (err)
+		goto err_free_polldev;
+	err = input_register_polled_device(rfk->poll_dev);
+	if (err)
+		goto err_unreg_rfk;
+
+	rfk->registered = 1;
+
+	return;
+err_unreg_rfk:
+	rfkill_unregister(rfk->rfkill);
+err_free_polldev:
+	input_free_polled_device(rfk->poll_dev);
+	rfk->poll_dev = NULL;
+err_free_rfk:
+	rfkill_free(rfk->rfkill);
+	rfk->rfkill = NULL;
+out_error:
+	rfk->registered = 0;
+	b43warn(wl, "RF-kill button init failed\n");
 }
 
-void b43_rfkill_free(struct b43_wldev *dev)
+void b43_rfkill_exit(struct b43_wldev *dev)
 {
 	struct b43_rfkill *rfk = &(dev->wl->rfkill);
 
+	if (!rfk->registered)
+		return;
+	rfk->registered = 0;
+
+	input_unregister_polled_device(rfk->poll_dev);
+	rfkill_unregister(rfk->rfkill);
 	input_free_polled_device(rfk->poll_dev);
 	rfk->poll_dev = NULL;
 	rfkill_free(rfk->rfkill);
diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h
index 29544e8..adacf93 100644
--- a/drivers/net/wireless/b43/rfkill.h
+++ b/drivers/net/wireless/b43/rfkill.h
@@ -15,14 +15,14 @@
 	struct rfkill *rfkill;
 	/* The poll device for the RFKILL input button */
 	struct input_polled_dev *poll_dev;
+	/* Did initialization succeed? Used for freeing. */
+	bool registered;
 	/* The unique name of this rfkill switch */
-	char name[32];
+	char name[sizeof("b43-phy4294967295")];
 };
 
-/* All the init functions return void, because we are not interested
+/* The init function returns void, because we are not interested
  * in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_alloc(struct b43_wldev *dev);
-void b43_rfkill_free(struct b43_wldev *dev);
 void b43_rfkill_init(struct b43_wldev *dev);
 void b43_rfkill_exit(struct b43_wldev *dev);
 
@@ -36,12 +36,6 @@
 	/* empty */
 };
 
-static inline void b43_rfkill_alloc(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_free(struct b43_wldev *dev)
-{
-}
 static inline void b43_rfkill_init(struct b43_wldev *dev)
 {
 }
diff --git a/drivers/net/wireless/b43legacy/debugfs.c b/drivers/net/wireless/b43legacy/debugfs.c
index eefa6fb79..619b453 100644
--- a/drivers/net/wireless/b43legacy/debugfs.c
+++ b/drivers/net/wireless/b43legacy/debugfs.c
@@ -124,7 +124,7 @@
 	__le16 *le16buf = (__le16 *)buf;
 
 	for (i = 0; i < 0x1000; i++) {
-		if (bufsize <= 0)
+		if (bufsize < sizeof(tmp))
 			break;
 		tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 2 * i);
 		le16buf[i] = cpu_to_le16(tmp);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index f0e56df..3bde1e9 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2781,6 +2781,17 @@
 
 	if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
 		return;
+
+	/* Disable and sync interrupts. We must do this before than
+	 * setting the status to INITIALIZED, as the interrupt handler
+	 * won't care about IRQs then. */
+	spin_lock_irqsave(&wl->irq_lock, flags);
+	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
+							  B43legacy_IRQ_ALL);
+	b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
+	spin_unlock_irqrestore(&wl->irq_lock, flags);
+	b43legacy_synchronize_irq(dev);
+
 	b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
 
 	mutex_unlock(&wl->mutex);
@@ -2791,14 +2802,6 @@
 
 	ieee80211_stop_queues(wl->hw); /* FIXME this could cause a deadlock */
 
-	/* Disable and sync interrupts. */
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
-							  B43legacy_IRQ_ALL);
-	b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43legacy_synchronize_irq(dev);
-
 	b43legacy_mac_suspend(dev);
 	free_irq(dev->dev->irq, dev);
 	b43legacydbg(wl, "Wireless interface stopped\n");
@@ -3332,7 +3335,7 @@
 	return err;
 }
 
-void b43legacy_stop(struct ieee80211_hw *hw)
+static void b43legacy_stop(struct ieee80211_hw *hw)
 {
 	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
 	struct b43legacy_wldev *dev = wl->current_dev;
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 7da3664..fc876ba 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -444,7 +444,7 @@
 
 MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
 
-static struct pci_driver prism2_pci_drv_id = {
+static struct pci_driver prism2_pci_driver = {
 	.name		= "hostap_pci",
 	.id_table	= prism2_pci_id_table,
 	.probe		= prism2_pci_probe,
@@ -458,13 +458,13 @@
 
 static int __init init_prism2_pci(void)
 {
-	return pci_register_driver(&prism2_pci_drv_id);
+	return pci_register_driver(&prism2_pci_driver);
 }
 
 
 static void __exit exit_prism2_pci(void)
 {
-	pci_unregister_driver(&prism2_pci_drv_id);
+	pci_unregister_driver(&prism2_pci_driver);
 }
 
 
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 8d53d08..fc6cdd8 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -1267,7 +1267,7 @@
 				       IPW2100_INTA_FATAL_ERROR |
 				       IPW2100_INTA_PARITY_ERROR);
 		}
-	} while (i--);
+	} while (--i);
 
 	/* Clear out any pending INTAs since we aren't supposed to have
 	 * interrupts enabled at this point... */
@@ -1339,7 +1339,7 @@
 
 		if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
 			break;
-	} while (i--);
+	} while (--i);
 
 	priv->status &= ~STATUS_RESET_PENDING;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 262ab0b..c48b1b5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -71,19 +71,19 @@
 };
 
 static s32 iwl_expected_tpt_g[IWL_RATE_COUNT] = {
-	0, 0, 76, 104, 130, 168, 191, 202, 7, 13, 35, 58
+	7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
 };
 
 static s32 iwl_expected_tpt_g_prot[IWL_RATE_COUNT] = {
-	0, 0, 0, 80, 93, 113, 123, 125, 7, 13, 35, 58
+	7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
 };
 
 static s32 iwl_expected_tpt_a[IWL_RATE_COUNT] = {
-	40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0, 0
+	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
 };
 
 static s32 iwl_expected_tpt_b[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 0, 0, 0, 0, 7, 13, 35, 58
+	7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
 };
 
 struct iwl_tpt_entry {
@@ -350,6 +350,10 @@
 
 	sta->last_txrate = sta->txrate;
 
+	/* For MODE_IEEE80211A mode it start at IWL_FIRST_OFDM_RATE */
+        if (local->hw.conf.phymode == MODE_IEEE80211A)
+                sta->last_txrate += IWL_FIRST_OFDM_RATE;
+
 	IWL_DEBUG_RATE("leave\n");
 }
 
@@ -417,6 +421,33 @@
 	IWL_DEBUG_RATE("leave\n");
 }
 
+
+/*
+ * get ieee prev rate from rate scale table.
+ * for A and B mode we need to overright prev
+ * value
+ */
+static int rs_adjust_next_rate(struct iwl_priv *priv, int rate)
+{
+	int next_rate = iwl_get_prev_ieee_rate(rate);
+
+	switch (priv->phymode) {
+	case MODE_IEEE80211A:
+		if (rate == IWL_RATE_12M_INDEX)
+			next_rate = IWL_RATE_9M_INDEX;
+		else if (rate == IWL_RATE_6M_INDEX)
+			next_rate = IWL_RATE_6M_INDEX;
+		break;
+	case MODE_IEEE80211B:
+		if (rate == IWL_RATE_11M_INDEX_TABLE)
+			next_rate = IWL_RATE_5M_INDEX_TABLE;
+		break;
+	default:
+		break;
+	}
+
+	return next_rate;
+}
 /**
  * rs_tx_status - Update rate control values based on Tx results
  *
@@ -479,7 +510,8 @@
 			last_index = scale_rate_index;
 		} else {
 			current_count = priv->retry_rate;
-			last_index = iwl_get_prev_ieee_rate(scale_rate_index);
+			last_index = rs_adjust_next_rate(priv,
+							 scale_rate_index);
 		}
 
 		/* Update this rate accounting for as many retries
@@ -494,9 +526,10 @@
 
 		if (retries)
 			scale_rate_index =
-			    iwl_get_prev_ieee_rate(scale_rate_index);
+			    rs_adjust_next_rate(priv, scale_rate_index);
 	}
 
+
 	/* Update the last index window with success/failure based on ACK */
 	IWL_DEBUG_RATE("Update rate %d with %s.\n",
 		       last_index,
@@ -672,7 +705,10 @@
 	}
 
 	rate_mask = sta->supp_rates;
-	index = min(sta->txrate & 0xffff, IWL_RATE_COUNT - 1);
+	index = min(sta->last_txrate & 0xffff, IWL_RATE_COUNT - 1);
+
+	if (priv->phymode == (u8) MODE_IEEE80211A)
+		rate_mask = rate_mask << IWL_FIRST_OFDM_RATE;
 
 	rs_priv = (void *)sta->rate_ctrl_priv;
 
@@ -801,7 +837,11 @@
  out:
 
 	sta->last_txrate = index;
-	sta->txrate = sta->last_txrate;
+	if (priv->phymode == (u8) MODE_IEEE80211A)
+		sta->txrate = sta->last_txrate - IWL_FIRST_OFDM_RATE;
+	else
+		sta->txrate = sta->last_txrate;
+
 	sta_info_put(sta);
 
 	IWL_DEBUG_RATE("leave: %d\n", index);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h
index b926738..bec4d3f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h
@@ -36,10 +36,17 @@
 	u8 next_rs;		/* next rate used in rs algo */
 	u8 prev_rs_tgg;		/* previous rate used in TGG rs algo */
 	u8 next_rs_tgg;		/* next rate used in TGG rs algo */
+        u8 table_rs_index;	/* index in rate scale table cmd */
+        u8 prev_table_rs;	/* prev in rate table cmd */
+
 };
 
 enum {
-	IWL_RATE_6M_INDEX = 0,
+	IWL_RATE_1M_INDEX = 0,
+	IWL_RATE_2M_INDEX,
+	IWL_RATE_5M_INDEX,
+	IWL_RATE_11M_INDEX,
+	IWL_RATE_6M_INDEX,
 	IWL_RATE_9M_INDEX,
 	IWL_RATE_12M_INDEX,
 	IWL_RATE_18M_INDEX,
@@ -47,16 +54,28 @@
 	IWL_RATE_36M_INDEX,
 	IWL_RATE_48M_INDEX,
 	IWL_RATE_54M_INDEX,
-	IWL_RATE_1M_INDEX,
-	IWL_RATE_2M_INDEX,
-	IWL_RATE_5M_INDEX,
-	IWL_RATE_11M_INDEX,
 	IWL_RATE_COUNT,
 	IWL_RATE_INVM_INDEX,
 	IWL_RATE_INVALID = IWL_RATE_INVM_INDEX
 };
 
 enum {
+	IWL_RATE_6M_INDEX_TABLE = 0,
+	IWL_RATE_9M_INDEX_TABLE,
+	IWL_RATE_12M_INDEX_TABLE,
+	IWL_RATE_18M_INDEX_TABLE,
+	IWL_RATE_24M_INDEX_TABLE,
+	IWL_RATE_36M_INDEX_TABLE,
+	IWL_RATE_48M_INDEX_TABLE,
+	IWL_RATE_54M_INDEX_TABLE,
+	IWL_RATE_1M_INDEX_TABLE,
+	IWL_RATE_2M_INDEX_TABLE,
+	IWL_RATE_5M_INDEX_TABLE,
+	IWL_RATE_11M_INDEX_TABLE,
+	IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX,
+};
+
+enum {
 	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
 	IWL_LAST_OFDM_RATE = IWL_RATE_54M_INDEX,
 	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 19bcb01..3a45fe9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -54,7 +54,9 @@
 				    IWL_RATE_##rp##M_INDEX, \
 				    IWL_RATE_##rn##M_INDEX, \
 				    IWL_RATE_##pp##M_INDEX, \
-				    IWL_RATE_##np##M_INDEX }
+				    IWL_RATE_##np##M_INDEX, \
+				    IWL_RATE_##r##M_INDEX_TABLE, \
+				    IWL_RATE_##ip##M_INDEX_TABLE }
 
 /*
  * Parameter order:
@@ -65,6 +67,10 @@
  *
  */
 const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
+	IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
+	IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
+	IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
+	IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
 	IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
 	IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
 	IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
@@ -73,10 +79,6 @@
 	IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
 	IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
 	IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-	IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
-	IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
-	IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
-	IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
 };
 
 /* 1 = enable the iwl_disable_events() function */
@@ -662,10 +664,11 @@
 	cmd->cmd.tx.tx_flags = tx_flags;
 
 	/* OFDM */
-	cmd->cmd.tx.supp_rates[0] = rate_mask & IWL_OFDM_RATES_MASK;
+	cmd->cmd.tx.supp_rates[0] =
+	   ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 
 	/* CCK */
-	cmd->cmd.tx.supp_rates[1] = (rate_mask >> 8) & 0xF;
+	cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF);
 
 	IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 		       "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
@@ -1432,7 +1435,7 @@
 	/* use this channel group's 6Mbit clipping/saturation pwr,
 	 *   but cap at regulatory scan power restriction (set during init
 	 *   based on eeprom channel data) for this channel.  */
-	power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX]);
+	power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
 
 	/* further limit to user's max power preference.
 	 * FIXME:  Other spectrum management power limitations do not
@@ -1447,7 +1450,7 @@
 	 *   *index*. */
 	power_index = ch_info->power_info[rate_index].power_table_index
 	    - (power - ch_info->power_info
-	       [IWL_RATE_6M_INDEX].requested_power) * 2;
+	       [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
 
 	/* store reference index that we use when adjusting *all* scan
 	 *   powers.  So we can accommodate user (all channel) or spectrum
@@ -1476,7 +1479,7 @@
  */
 int iwl_hw_reg_send_txpower(struct iwl_priv *priv)
 {
-	int rate_idx;
+	int rate_idx, i;
 	const struct iwl_channel_info *ch_info = NULL;
 	struct iwl_txpowertable_cmd txpower = {
 		.channel = priv->active_rxon.channel,
@@ -1500,20 +1503,36 @@
 	}
 
 	/* fill cmd with power settings for all rates for current channel */
-	for (rate_idx = 0; rate_idx < IWL_RATE_COUNT; rate_idx++) {
-		txpower.power[rate_idx].tpc = ch_info->power_info[rate_idx].tpc;
-		txpower.power[rate_idx].rate = iwl_rates[rate_idx].plcp;
+	/* Fill OFDM rate */
+	for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
+	     rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) {
+
+		txpower.power[i].tpc = ch_info->power_info[i].tpc;
+		txpower.power[i].rate = iwl_rates[rate_idx].plcp;
 
 		IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
 				le16_to_cpu(txpower.channel),
 				txpower.band,
-				txpower.power[rate_idx].tpc.tx_gain,
-				txpower.power[rate_idx].tpc.dsp_atten,
-				txpower.power[rate_idx].rate);
+				txpower.power[i].tpc.tx_gain,
+				txpower.power[i].tpc.dsp_atten,
+				txpower.power[i].rate);
+	}
+	/* Fill CCK rates */
+	for (rate_idx = IWL_FIRST_CCK_RATE;
+	     rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
+		txpower.power[i].tpc = ch_info->power_info[i].tpc;
+		txpower.power[i].rate = iwl_rates[rate_idx].plcp;
+
+		IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+				le16_to_cpu(txpower.channel),
+				txpower.band,
+				txpower.power[i].tpc.tx_gain,
+				txpower.power[i].tpc.dsp_atten,
+				txpower.power[i].rate);
 	}
 
 	return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
-				sizeof(struct iwl_txpowertable_cmd), &txpower);
+			sizeof(struct iwl_txpowertable_cmd), &txpower);
 
 }
 
@@ -1549,7 +1568,7 @@
 	power_info = ch_info->power_info;
 
 	/* update OFDM Txpower settings */
-	for (i = IWL_FIRST_OFDM_RATE; i <= IWL_LAST_OFDM_RATE;
+	for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
 	     i++, ++power_info) {
 		int delta_idx;
 
@@ -1573,14 +1592,14 @@
 	 *    ... all CCK power settings for a given channel are the *same*. */
 	if (power_changed) {
 		power =
-		    ch_info->power_info[IWL_RATE_12M_INDEX].
+		    ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
 		    requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
 
 		/* do all CCK rates' iwl_channel_power_info structures */
-		for (i = IWL_FIRST_CCK_RATE; i <= IWL_LAST_CCK_RATE; i++) {
+		for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
 			power_info->requested_power = power;
 			power_info->base_power_index =
-			    ch_info->power_info[IWL_RATE_12M_INDEX].
+			    ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
 			    base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
 			++power_info;
 		}
@@ -1674,7 +1693,7 @@
 		for (scan_tbl_index = 0;
 		     scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
 			s32 actual_index = (scan_tbl_index == 0) ?
-			    IWL_RATE_1M_INDEX : IWL_RATE_6M_INDEX;
+			    IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
 			iwl_hw_reg_set_scan_power(priv, scan_tbl_index,
 					   actual_index, clip_pwrs,
 					   ch_info, a_band);
@@ -1905,19 +1924,19 @@
 		for (rate_index = 0;
 		     rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
 			switch (rate_index) {
-			case IWL_RATE_36M_INDEX:
+			case IWL_RATE_36M_INDEX_TABLE:
 				if (i == 0)	/* B/G */
 					*clip_pwrs = satur_pwr;
 				else	/* A */
 					*clip_pwrs = satur_pwr - 5;
 				break;
-			case IWL_RATE_48M_INDEX:
+			case IWL_RATE_48M_INDEX_TABLE:
 				if (i == 0)
 					*clip_pwrs = satur_pwr - 7;
 				else
 					*clip_pwrs = satur_pwr - 10;
 				break;
-			case IWL_RATE_54M_INDEX:
+			case IWL_RATE_54M_INDEX_TABLE:
 				if (i == 0)
 					*clip_pwrs = satur_pwr - 9;
 				else
@@ -2031,7 +2050,7 @@
 		}
 
 		/* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
-		pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX];
+		pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
 		power = pwr_info->requested_power +
 			IWL_CCK_FROM_OFDM_POWER_DIFF;
 		pwr_index = pwr_info->power_table_index +
@@ -2047,9 +2066,9 @@
 		/* fill each CCK rate's iwl_channel_power_info structure
 		 * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
 		 * NOTE:  CCK rates start at end of OFDM rates! */
-		for (rate_index = IWL_OFDM_RATES;
-		     rate_index < IWL_RATE_COUNT; rate_index++) {
-			pwr_info = &ch_info->power_info[rate_index];
+		for (rate_index = 0;
+		     rate_index < IWL_CCK_RATES; rate_index++) {
+			pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
 			pwr_info->requested_power = power;
 			pwr_info->power_table_index = pwr_index;
 			pwr_info->base_power_index = base_pwr_index;
@@ -2061,7 +2080,7 @@
 		for (scan_tbl_index = 0;
 		     scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
 			s32 actual_index = (scan_tbl_index == 0) ?
-				IWL_RATE_1M_INDEX : IWL_RATE_6M_INDEX;
+				IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
 			iwl_hw_reg_set_scan_power(priv, scan_tbl_index,
 				actual_index, clip_pwrs, ch_info, a_band);
 		}
@@ -2139,17 +2158,20 @@
  */
 int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
 {
-	int rc, i;
+	int rc, i, index, prev_index;
 	struct iwl_rate_scaling_cmd rate_cmd = {
 		.reserved = {0, 0, 0},
 	};
 	struct iwl_rate_scaling_info *table = rate_cmd.table;
 
 	for (i = 0; i < ARRAY_SIZE(iwl_rates); i++) {
-		table[i].rate_n_flags =
+		index = iwl_rates[i].table_rs_index;
+
+		table[index].rate_n_flags =
 			iwl_hw_set_rate_n_flags(iwl_rates[i].plcp, 0);
-		table[i].try_cnt = priv->retry_rate;
-		table[i].next_rate_index = iwl_get_prev_ieee_rate(i);
+		table[index].try_cnt = priv->retry_rate;
+		prev_index = iwl_get_prev_ieee_rate(i);
+		table[index].next_rate_index = iwl_rates[prev_index].table_rs_index;
 	}
 
 	switch (priv->phymode) {
@@ -2157,26 +2179,26 @@
 		IWL_DEBUG_RATE("Select A mode rate scale\n");
 		/* If one of the following CCK rates is used,
 		 * have it fall back to the 6M OFDM rate */
-		for (i = IWL_FIRST_CCK_RATE; i <= IWL_LAST_CCK_RATE; i++)
-			table[i].next_rate_index = IWL_FIRST_OFDM_RATE;
+		for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++)
+			table[i].next_rate_index = iwl_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
 
 		/* Don't fall back to CCK rates */
-		table[IWL_RATE_12M_INDEX].next_rate_index = IWL_RATE_9M_INDEX;
+		table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = IWL_RATE_9M_INDEX_TABLE;
 
 		/* Don't drop out of OFDM rates */
-		table[IWL_FIRST_OFDM_RATE].next_rate_index =
-		    IWL_FIRST_OFDM_RATE;
+		table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
+		    iwl_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
 		break;
 
 	case MODE_IEEE80211B:
 		IWL_DEBUG_RATE("Select B mode rate scale\n");
 		/* If an OFDM rate is used, have it fall back to the
 		 * 1M CCK rates */
-		for (i = IWL_FIRST_OFDM_RATE; i <= IWL_LAST_OFDM_RATE; i++)
-			table[i].next_rate_index = IWL_FIRST_CCK_RATE;
+		for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; i++)
+			table[i].next_rate_index = iwl_rates[IWL_FIRST_CCK_RATE].table_rs_index;
 
 		/* CCK shouldn't fall back to OFDM... */
-		table[IWL_RATE_11M_INDEX].next_rate_index = IWL_RATE_5M_INDEX;
+		table[IWL_RATE_11M_INDEX_TABLE].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
 		break;
 
 	default:
@@ -2248,22 +2270,12 @@
 	tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
 				      TX_CMD_FLG_TSF_MSK);
 
-	/* supp_rates[0] == OFDM  */
-	tx_beacon_cmd->tx.supp_rates[0] = IWL_OFDM_BASIC_RATES_MASK;
+	/* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
+	tx_beacon_cmd->tx.supp_rates[0] =
+		(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 
-	/* supp_rates[1] == CCK
-	 *
-	 * NOTE:  IWL_*_RATES_MASK are not in the order that supp_rates
-	 * expects so we have to shift them around.
-	 *
-	 * supp_rates expects:
-	 * CCK rates are bit0..3
-	 *
-	 * However IWL_*_RATES_MASK has:
-	 * CCK rates are bit8..11
-	 */
 	tx_beacon_cmd->tx.supp_rates[1] =
-		(IWL_CCK_BASIC_RATES_MASK >> 8) & 0xF;
+		(IWL_CCK_BASIC_RATES_MASK & 0xF);
 
 	return (sizeof(struct iwl_tx_beacon_cmd) + frame_size);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4f22a71..465da4f 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4850,7 +4850,7 @@
 	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
 		/* Hardware disappeared */
 		IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
-		goto none;
+		goto unplugged;
 	}
 
 	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
@@ -4858,6 +4858,7 @@
 
 	/* iwl_irq_tasklet() will service interrupts and re-enable them */
 	tasklet_schedule(&priv->irq_tasklet);
+unplugged:
 	spin_unlock(&priv->lock);
 
 	return IRQ_HANDLED;
@@ -5331,13 +5332,13 @@
 	/* 5.2GHz channels start after the 2.4GHz channels */
 	modes[A].mode = MODE_IEEE80211A;
 	modes[A].channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
-	modes[A].rates = rates;
+	modes[A].rates = &rates[4];
 	modes[A].num_rates = 8;	/* just OFDM */
 	modes[A].num_channels = 0;
 
 	modes[B].mode = MODE_IEEE80211B;
 	modes[B].channels = channels;
-	modes[B].rates = &rates[8];
+	modes[B].rates = rates;
 	modes[B].num_rates = 4;	/* just CCK */
 	modes[B].num_channels = 0;
 
@@ -8354,6 +8355,8 @@
 	}
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
+	hw->rate_control_algorithm = "iwl-3945-rs";
+
 	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
 	priv = hw->priv;
 	priv->hw = hw;
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index d60adcb..9918780 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -5156,9 +5156,10 @@
 	}
 
 	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared */
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
 		IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
-		goto none;
+		goto unplugged;
 	}
 
 	IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
@@ -5166,8 +5167,9 @@
 
 	/* iwl_irq_tasklet() will service interrupts and re-enable them */
 	tasklet_schedule(&priv->irq_tasklet);
-	spin_unlock(&priv->lock);
 
+ unplugged:
+	spin_unlock(&priv->lock);
 	return IRQ_HANDLED;
 
  none:
@@ -8955,6 +8957,8 @@
 	}
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
+	hw->rate_control_algorithm = "iwl-4965-rs";
+
 	IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
 	priv = hw->priv;
 	priv->hw = hw;
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 1cbbd96..be5cfd8 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -912,6 +912,10 @@
 	return 0;
 }
 
+/*
+ * Note: NEVER use libertas_queue_cmd() with addtail==0 other than for
+ * the command timer, because it does not account for queued commands.
+ */
 void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u8 addtail)
 {
 	unsigned long flags;
@@ -941,10 +945,11 @@
 
 	spin_lock_irqsave(&adapter->driver_lock, flags);
 
-	if (addtail)
+	if (addtail) {
 		list_add_tail((struct list_head *)cmdnode,
 			      &adapter->cmdpendingq);
-	else
+		adapter->nr_cmd_pending++;
+	} else
 		list_add((struct list_head *)cmdnode, &adapter->cmdpendingq);
 
 	spin_unlock_irqrestore(&adapter->driver_lock, flags);
@@ -1412,7 +1417,6 @@
 	cmdnode->cmdwaitqwoken = 0;
 
 	libertas_queue_cmd(adapter, cmdnode, 1);
-	adapter->nr_cmd_pending++;
 	wake_up_interruptible(&priv->waitq);
 
 	if (wait_option & CMD_OPTION_WAITFORRSP) {
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 0360cad..ec89dab 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -148,11 +148,11 @@
 {
 	int i;
 
-	for (i = 0; i < 500; i++) {
+	for (i = 0; i < 1000; i++) {
 		u8 val = if_cs_read8(card, addr);
 		if (val == reg)
 			return i;
-		udelay(100);
+		udelay(500);
 	}
 	return -ETIME;
 }
@@ -878,6 +878,9 @@
 		goto out3;
 	}
 
+	/* Clear any interrupt cause that happend while sending
+	 * firmware/initializing card */
+	if_cs_write16(card, IF_CS_C_INT_CAUSE, IF_CS_C_IC_MASK);
 	if_cs_enable_ints(card);
 
 	/* And finally bring the card up */
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a8e1707..b24425f 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -182,12 +182,14 @@
 		goto out;
 	}
 
-	skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+	skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
 	if (!skb) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
+	skb_reserve(skb, NET_IP_ALIGN);
+
 	data = skb_put(skb, size);
 
 	memcpy(data, buffer, size);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index ff2d632..702321c 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -620,7 +620,7 @@
 	 * up to version C the link tuning should halt after 20
 	 * seconds.
 	 */
-	if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
+	if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
 	    rt2x00dev->link.count > 20)
 		return;
 
@@ -630,7 +630,7 @@
 	 * Chipset versions C and lower should directly continue
 	 * to the dynamic CCA tuning.
 	 */
-	if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D)
+	if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D)
 		goto dynamic_cca_tune;
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 7cdc80a..277a020 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -753,7 +753,7 @@
 	rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 
-	if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
 		rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 		reg &= ~0x0002;
 	} else {
@@ -1257,7 +1257,7 @@
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 9845e58..d1ad525 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -751,14 +751,16 @@
 	return (chipset->rf == chip);
 }
 
-static inline u16 rt2x00_get_rev(const struct rt2x00_chip *chipset)
+static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset)
 {
 	return chipset->rev;
 }
 
-static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset, const u32 mask)
+static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
+				   const u32 rev)
 {
-	return chipset->rev & mask;
+	return (((chipset->rev & 0xffff0) == rev) &&
+		!!(chipset->rev & 0x0000f));
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 4a6a0bd..85ea8a8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -196,6 +196,14 @@
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct interface *intf = &rt2x00dev->interface;
 
+	/* FIXME: Beaconing is broken in rt2x00. */
+	if (conf->type == IEEE80211_IF_TYPE_IBSS ||
+	    conf->type == IEEE80211_IF_TYPE_AP) {
+		ERROR(rt2x00dev,
+		      "rt2x00 does not support Adhoc or Master mode");
+		return -EOPNOTSUPP;
+	}
+
 	/*
 	 * Don't allow interfaces to be added while
 	 * either the device has disappeared or when
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 46c8c08..dc640bf 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1486,7 +1486,7 @@
 	rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
 
-	if (!rt2x00_rev(&rt2x00dev->chip, 0x25730)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 4bd14b3..88efe1b 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -2735,16 +2735,8 @@
 			return -EFAULT;
 		return set_mac_address(strip_info, &addr);
 	}
-	/*
-	 * Allow stty to read, but not set, the serial port
-	 */
-
-	case TCGETS:
-	case TCGETA:
-		return n_tty_ioctl(tty, file, cmd, arg);
-		break;
 	default:
-		return -ENOIOCTLCMD;
+		return tty_mode_ioctl(tty, file, cmd, arg);
 		break;
 	}
 	return 0;
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index a83c3db..c93d3d2 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -64,6 +64,8 @@
 		b->head_pos = 0;
 		b->sample_received = 0;
 		b->sample_lost_overflow = 0;
+		b->backtrace_aborted = 0;
+		b->sample_invalid_eip = 0;
 		b->cpu = i;
 		INIT_DELAYED_WORK(&b->work, wq_sync_buffer);
 	}
@@ -175,6 +177,11 @@
 
 	cpu_buf->sample_received++;
 
+	if (pc == ESCAPE_CODE) {
+		cpu_buf->sample_invalid_eip++;
+		return 0;
+	}
+
 	if (nr_available_slots(cpu_buf) < 3) {
 		cpu_buf->sample_lost_overflow++;
 		return 0;
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 49900d9..c66c025 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -42,6 +42,7 @@
 	unsigned long sample_received;
 	unsigned long sample_lost_overflow;
 	unsigned long backtrace_aborted;
+	unsigned long sample_invalid_eip;
 	int cpu;
 	struct delayed_work work;
 } ____cacheline_aligned;
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index f0acb66..d1f6d77 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -26,6 +26,8 @@
 		cpu_buf = &cpu_buffer[i]; 
 		cpu_buf->sample_received = 0;
 		cpu_buf->sample_lost_overflow = 0;
+		cpu_buf->backtrace_aborted = 0;
+		cpu_buf->sample_invalid_eip = 0;
 	}
  
 	atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
@@ -61,6 +63,8 @@
 			&cpu_buf->sample_lost_overflow);
 		oprofilefs_create_ro_ulong(sb, cpudir, "backtrace_aborted",
 			&cpu_buf->backtrace_aborted);
+		oprofilefs_create_ro_ulong(sb, cpudir, "sample_invalid_eip",
+			&cpu_buf->sample_invalid_eip);
 	}
  
 	oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mm",
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 7a1d6d5..e1ca425 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,6 +21,17 @@
 
 	   If you don't know what to do here, say N.
 
+config PCI_LEGACY
+	bool "Enable deprecated pci_find_* API"
+	depends on PCI
+	default y
+	help
+	  Say Y here if you want to include support for the deprecated
+	  pci_find_slot() and pci_find_device() APIs.  Most drivers have
+	  been converted over to using the proper hotplug APIs, so this
+	  option serves to include/exclude only a few drivers that are
+	  still using this API.
+
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 63d6275..a64449d 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -41,7 +41,7 @@
 
 config HOTPLUG_PCI_COMPAQ
 	tristate "Compaq PCI Hotplug driver"
-	depends on X86 && PCI_BIOS
+	depends on X86 && PCI_BIOS && PCI_LEGACY
 	help
 	  Say Y here if you have a motherboard with a Compaq PCI Hotplug
 	  controller.
@@ -63,7 +63,7 @@
 
 config HOTPLUG_PCI_IBM
 	tristate "IBM PCI Hotplug driver"
-	depends on X86_IO_APIC && X86 && PCI_BIOS
+	depends on X86_IO_APIC && X86 && PCI_BIOS && PCI_LEGACY
 	help
 	  Say Y here if you have a motherboard with a IBM PCI Hotplug
 	  controller.
@@ -119,7 +119,7 @@
 
 config HOTPLUG_PCI_CPCI_GENERIC
 	tristate "Generic port I/O CompactPCI Hotplug driver"
-	depends on HOTPLUG_PCI_CPCI && X86
+	depends on HOTPLUG_PCI_CPCI && X86 && PCI_LEGACY
 	help
 	  Say Y here if you have a CompactPCI system card that exposes the #ENUM
 	  hotswap signal as a bit in a system register that can be read through
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 3ef0a48..856d57b 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1931,16 +1931,14 @@
 			return ;
 		}
 
-		if (func != NULL && ctrl != NULL) {
-			if (cpqhp_process_SS(ctrl, func) != 0) {
-				amber_LED_on (ctrl, hp_slot);
-				green_LED_on (ctrl, hp_slot);
-				
-				set_SOGO(ctrl);
+		if (cpqhp_process_SS(ctrl, func) != 0) {
+			amber_LED_on(ctrl, hp_slot);
+			green_LED_on(ctrl, hp_slot);
 
-				/* Wait for SOBS to be unset */
-				wait_for_ctrl_irq (ctrl);
-			}
+			set_SOGO(ctrl);
+
+			/* Wait for SOBS to be unset */
+			wait_for_ctrl_irq(ctrl);
 		}
 
 		p_slot->state = STATIC_STATE;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 87e0161..07c9f09 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -224,6 +224,12 @@
 	return entry;
 }
 
+static void pci_intx_for_msi(struct pci_dev *dev, int enable)
+{
+	if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG))
+		pci_intx(dev, enable);
+}
+
 #ifdef CONFIG_PM
 static void __pci_restore_msi_state(struct pci_dev *dev)
 {
@@ -237,7 +243,7 @@
 	entry = get_irq_msi(dev->irq);
 	pos = entry->msi_attrib.pos;
 
-	pci_intx(dev, 0);		/* disable intx */
+	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
 	write_msi_msg(dev->irq, &entry->msg);
 	if (entry->msi_attrib.maskbit)
@@ -260,7 +266,7 @@
 		return;
 
 	/* route the table */
-	pci_intx(dev, 0);		/* disable intx */
+	pci_intx_for_msi(dev, 0);
 	msix_set_enable(dev, 0);
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
@@ -343,7 +349,7 @@
 	}
 
 	/* Set MSI enabled bits	 */
-	pci_intx(dev, 0);		/* disable intx */
+	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 1);
 	dev->msi_enabled = 1;
 
@@ -433,7 +439,7 @@
 		i++;
 	}
 	/* Set MSI-X enabled bits */
-	pci_intx(dev, 0);		/* disable intx */
+	pci_intx_for_msi(dev, 0);
 	msix_set_enable(dev, 1);
 	dev->msix_enabled = 1;
 
@@ -528,7 +534,7 @@
 		return;
 
 	msi_set_enable(dev, 0);
-	pci_intx(dev, 1);		/* enable intx */
+	pci_intx_for_msi(dev, 1);
 	dev->msi_enabled = 0;
 
 	BUG_ON(list_empty(&dev->msi_list));
@@ -640,7 +646,7 @@
 		return;
 
 	msix_set_enable(dev, 0);
-	pci_intx(dev, 1);		/* enable intx */
+	pci_intx_for_msi(dev, 1);
 	dev->msix_enabled = 0;
 
 	msix_free_all_irqs(dev);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 6e2760b..6d1a216 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -143,8 +143,8 @@
  * system is in its list of supported devices.  Returns the matching
  * pci_device_id structure or %NULL if there is no match.
  */
-const struct pci_device_id *pci_match_device(struct pci_driver *drv,
-					     struct pci_dev *dev)
+static const struct pci_device_id *pci_match_device(struct pci_driver *drv,
+						    struct pci_dev *dev)
 {
 	struct pci_dynid *dynid;
 
@@ -559,7 +559,6 @@
 postcore_initcall(pci_driver_init);
 
 EXPORT_SYMBOL(pci_match_id);
-EXPORT_SYMBOL(pci_match_device);
 EXPORT_SYMBOL(__pci_register_driver);
 EXPORT_SYMBOL(pci_unregister_driver);
 EXPORT_SYMBOL(pci_dev_driver);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d0bb5b9..26cc4dc 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1621,12 +1621,8 @@
 	printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RD580, quirk_disable_all_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RX790, quirk_disable_all_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS690, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
 
 /* Disable MSI on chipsets that are known to not support it */
@@ -1678,6 +1674,9 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
 			quirk_msi_ht_cap);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS,
+			PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+			quirk_msi_ht_cap);
 
 /* The nVidia CK804 chipset may have 2 HT MSI mappings.
  * MSI are supported if the MSI capability set in any of these mappings.
@@ -1705,4 +1704,48 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
 			quirk_nvidia_ck804_msi_ht_cap);
+
+static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
+{
+	dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5780,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5780S,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5714,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5714S,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5715,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+			PCI_DEVICE_ID_TIGON3_5715S,
+			quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4395,
+			quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
+			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
+			quirk_msi_intx_disable_bug);
+
 #endif /* CONFIG_PCI_MSI */
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index b001b59..854103402 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -113,6 +113,8 @@
 	return b;
 }
 
+#ifdef CONFIG_PCI_LEGACY
+
 /**
  * pci_find_slot - locate PCI device from a given PCI slot
  * @bus: number of PCI bus on which desired PCI device resides
@@ -137,6 +139,8 @@
 	return NULL;
 }
 
+#endif /* CONFIG_PCI_LEGACY */
+
 /**
  * pci_get_slot - locate PCI device for a given PCI slot
  * @bus: PCI bus on which desired PCI device resides
@@ -200,6 +204,7 @@
 	return NULL;
 }
 
+#ifdef CONFIG_PCI_LEGACY
 /**
  * pci_find_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
  * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
@@ -278,6 +283,7 @@
 {
 	return pci_find_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
 }
+#endif /* CONFIG_PCI_LEGACY */
 
 /**
  * pci_get_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
@@ -468,8 +474,11 @@
 EXPORT_SYMBOL(pci_dev_present);
 EXPORT_SYMBOL(pci_find_present);
 
+#ifdef CONFIG_PCI_LEGACY
 EXPORT_SYMBOL(pci_find_device);
 EXPORT_SYMBOL(pci_find_slot);
+#endif /* CONFIG_PCI_LEGACY */
+
 /* For boot time work */
 EXPORT_SYMBOL(pci_find_bus);
 EXPORT_SYMBOL(pci_find_next_bus);
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index cd0a204..11adab1 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -75,6 +75,7 @@
 {
 	int i = 0;
 	int irq;
+	int p, t;
 
 	if (!valid_IRQ(gsi))
 		return;
@@ -85,15 +86,22 @@
 	if (i >= PNP_MAX_IRQ)
 		return;
 
-#ifdef CONFIG_X86
-	if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE ||
-				polarity != ACPI_ACTIVE_HIGH)) {
-		pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, "
-				"active high", gsi);
-		triggering = ACPI_EDGE_SENSITIVE;
-		polarity = ACPI_ACTIVE_HIGH;
+	/*
+	 * in IO-APIC mode, use overrided attribute. Two reasons:
+	 * 1. BIOS bug in DSDT
+	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 */
+	if (!acpi_get_override_irq(gsi, &t, &p)) {
+		t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+		p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+		if (triggering != t || polarity != p) {
+			pnp_warn("IRQ %d override to %s, %s",
+				gsi, t ? "edge":"level", p ? "low":"high");
+			triggering = t;
+			polarity = p;
+		}
 	}
-#endif
 
 	res->irq_resource[i].flags = IORESOURCE_IRQ;	// Also clears _UNSET flag
 	res->irq_resource[i].flags |= irq_flags(triggering, polarity);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cbde770..e5cdc02 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -36,7 +36,9 @@
 	help
 	  The RTC device that will be used to (re)initialize the system
 	  clock, usually rtc0.  Initialization is done when the system
-	  starts up, and when it resumes from a low power state.
+	  starts up, and when it resumes from a low power state.  This
+	  device should record time in UTC, since the kernel won't do
+	  timezone correction.
 
 	  The driver for this RTC device must be loaded before late_initcall
 	  functions run, so it must usually be statically linked.
@@ -133,8 +135,8 @@
 
 	  The first seven registers on these chips hold an RTC, and other
 	  registers may add features such as NVRAM, a trickle charger for
-	  the RTC/NVRAM backup power, and alarms.  This driver may not
-	  expose all those available chip features.
+	  the RTC/NVRAM backup power, and alarms.  NVRAM is visible in
+	  sysfs, but other chip features may not be available.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1307.
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
index 1785272..33c0e98 100644
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -47,8 +47,8 @@
 			do_settimeofday(&tv);
 
 			dev_info(rtc->dev.parent,
-				"setting the system clock to "
-				"%d-%02d-%02d %02d:%02d:%02d (%u)\n",
+				"setting system clock to "
+				"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
 				tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
 				tm.tm_hour, tm.tm_min, tm.tm_sec,
 				(unsigned int) tv.tv_sec);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index db6f3f0..bc1c7fe 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -89,6 +89,7 @@
 
 struct ds1307 {
 	u8			reg_addr;
+	bool			has_nvram;
 	u8			regs[8];
 	enum ds_type		type;
 	struct i2c_msg		msg[2];
@@ -242,6 +243,87 @@
 	.set_time	= ds1307_set_time,
 };
 
+/*----------------------------------------------------------------------*/
+
+#define NVRAM_SIZE	56
+
+static ssize_t
+ds1307_nvram_read(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct i2c_client	*client;
+	struct ds1307		*ds1307;
+	struct i2c_msg		msg[2];
+	int			result;
+
+	client = to_i2c_client(container_of(kobj, struct device, kobj));
+	ds1307 = i2c_get_clientdata(client);
+
+	if (unlikely(off >= NVRAM_SIZE))
+		return 0;
+	if ((off + count) > NVRAM_SIZE)
+		count = NVRAM_SIZE - off;
+	if (unlikely(!count))
+		return count;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = buf;
+
+	buf[0] = 8 + off;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = count;
+	msg[1].buf = buf;
+
+	result = i2c_transfer(to_i2c_adapter(client->dev.parent), msg, 2);
+	if (result != 2) {
+		dev_err(&client->dev, "%s error %d\n", "nvram read", result);
+		return -EIO;
+	}
+	return count;
+}
+
+static ssize_t
+ds1307_nvram_write(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct i2c_client	*client;
+	u8			buffer[NVRAM_SIZE + 1];
+	int			ret;
+
+	client = to_i2c_client(container_of(kobj, struct device, kobj));
+
+	if (unlikely(off >= NVRAM_SIZE))
+		return -EFBIG;
+	if ((off + count) > NVRAM_SIZE)
+		count = NVRAM_SIZE - off;
+	if (unlikely(!count))
+		return count;
+
+	buffer[0] = 8 + off;
+	memcpy(buffer + 1, buf, count);
+
+	ret = i2c_master_send(client, buffer, count + 1);
+	return (ret < 0) ? ret : (ret - 1);
+}
+
+static struct bin_attribute nvram = {
+	.attr = {
+		.name	= "nvram",
+		.mode	= S_IRUGO | S_IWUSR,
+		.owner	= THIS_MODULE,
+	},
+
+	.read	= ds1307_nvram_read,
+	.write	= ds1307_nvram_write,
+	.size	= NVRAM_SIZE,
+};
+
+/*----------------------------------------------------------------------*/
+
 static struct i2c_driver ds1307_driver;
 
 static int __devinit ds1307_probe(struct i2c_client *client)
@@ -413,6 +495,14 @@
 		goto exit_free;
 	}
 
+	if (chip->nvram56) {
+		err = sysfs_create_bin_file(&client->dev.kobj, &nvram);
+		if (err == 0) {
+			ds1307->has_nvram = true;
+			dev_info(&client->dev, "56 bytes nvram\n");
+		}
+	}
+
 	return 0;
 
 exit_bad:
@@ -432,6 +522,9 @@
 {
 	struct ds1307	*ds1307 = i2c_get_clientdata(client);
 
+	if (ds1307->has_nvram)
+		sysfs_remove_bin_file(&client->dev.kobj, &nvram);
+
 	rtc_device_unregister(ds1307->rtc);
 	kfree(ds1307);
 	return 0;
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index bb53c09..d9e848d 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -291,7 +291,7 @@
 static struct bin_attribute ds1553_nvram_attr = {
 	.attr = {
 		.name = "nvram",
-		.mode = S_IRUGO | S_IWUGO,
+		.mode = S_IRUGO | S_IWUSR,
 	},
 	.size = RTC_OFFSET,
 	.read = ds1553_nvram_read,
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index c535b78..2e73f0b 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -160,10 +160,13 @@
 static struct bin_attribute ds1742_nvram_attr = {
 	.attr = {
 		.name = "nvram",
-		.mode = S_IRUGO | S_IWUGO,
+		.mode = S_IRUGO | S_IWUSR,
 	},
 	.read = ds1742_nvram_read,
 	.write = ds1742_nvram_write,
+	/* REVISIT: size in sysfs won't match actual size... if it's
+	 * not a constant, each RTC should have its own attribute.
+	 */
 };
 
 static int __devinit ds1742_rtc_probe(struct platform_device *pdev)
diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c
index bf60d35..cd0bbc0 100644
--- a/drivers/rtc/rtc-m48t59.c
+++ b/drivers/rtc/rtc-m48t59.c
@@ -353,11 +353,12 @@
 static struct bin_attribute m48t59_nvram_attr = {
 	.attr = {
 		.name = "nvram",
-		.mode = S_IRUGO | S_IWUGO,
+		.mode = S_IRUGO | S_IWUSR,
 		.owner = THIS_MODULE,
 	},
 	.read = m48t59_nvram_read,
 	.write = m48t59_nvram_write,
+	.size = M48T59_NVRAM_SIZE,
 };
 
 static int __devinit m48t59_rtc_probe(struct platform_device *pdev)
@@ -464,7 +465,7 @@
 	return 0;
 }
 
-static struct platform_driver m48t59_rtc_platdrv = {
+static struct platform_driver m48t59_rtc_driver = {
 	.driver		= {
 		.name	= "rtc-m48t59",
 		.owner	= THIS_MODULE,
@@ -475,12 +476,12 @@
 
 static int __init m48t59_rtc_init(void)
 {
-	return platform_driver_register(&m48t59_rtc_platdrv);
+	return platform_driver_register(&m48t59_rtc_driver);
 }
 
 static void __exit m48t59_rtc_exit(void)
 {
-	platform_driver_unregister(&m48t59_rtc_platdrv);
+	platform_driver_unregister(&m48t59_rtc_driver);
 }
 
 module_init(m48t59_rtc_init);
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 78277a1..8e8c8b8 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -351,8 +351,10 @@
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
 
-	if (rtc_valid_tm(tm) < 0)
+	if (rtc_valid_tm(tm) < 0) {
 		dev_err(dev, "invalid date\n");
+		rtc_time_to_tm(0, tm);
+	}
 
 	return 0;
 }
@@ -588,7 +590,7 @@
 
 	rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
 					   &sh_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc)) {
+	if (IS_ERR(rtc->rtc_dev)) {
 		ret = PTR_ERR(rtc->rtc_dev);
 		goto err_badmap;
 	}
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index 8288b6b..a265da7 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -291,7 +291,7 @@
 static struct bin_attribute stk17ta8_nvram_attr = {
 	.attr = {
 		.name = "nvram",
-		.mode = S_IRUGO | S_IWUGO,
+		.mode = S_IRUGO | S_IWUSR,
 		.owner = THIS_MODULE,
 	},
 	.size = RTC_OFFSET,
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 859f870..5e083d1 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -193,6 +193,12 @@
 	}
 }
 
+static void dcssblk_unregister_callback(struct device *dev)
+{
+	device_unregister(dev);
+	put_device(dev);
+}
+
 /*
  * device attribute for switching shared/nonshared (exclusive)
  * operation (show + store)
@@ -276,8 +282,7 @@
 	blk_cleanup_queue(dev_info->dcssblk_queue);
 	dev_info->gd->queue = NULL;
 	put_disk(dev_info->gd);
-	device_unregister(dev);
-	put_device(dev);
+	rc = device_schedule_callback(dev, dcssblk_unregister_callback);
 out:
 	up_write(&dcssblk_devices_sem);
 	return rc;
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 725b0dd..f4c132a 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -343,10 +343,10 @@
 
 	if (sch->schib.scsw.fctl & SCSW_FCTL_START_FUNC) {
 		/* Don't copy if a start function is in progress. */
-		if ((!sch->schib.scsw.actl & SCSW_ACTL_SUSPENDED) &&
+		if ((!(sch->schib.scsw.actl & SCSW_ACTL_SUSPENDED)) &&
 		    (sch->schib.scsw.actl &
 		     (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)) &&
-		    (!sch->schib.scsw.stctl & SCSW_STCTL_SEC_STATUS))
+		    (!(sch->schib.scsw.stctl & SCSW_STCTL_SEC_STATUS)))
 			return -EBUSY;
 	}
 	cmb_data = cdev->private->cmb;
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 7ee57f0..74f6b53 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -738,7 +738,7 @@
 	atomic_set(&cdev->private->onoff, 0);
 	cdev->dev.parent = &sch->dev;
 	cdev->dev.release = ccw_device_release;
-	INIT_LIST_HEAD(&cdev->private->kick_work.entry);
+	INIT_WORK(&cdev->private->kick_work, NULL);
 	cdev->dev.groups = ccwdev_attr_groups;
 	/* Do first half of device_register. */
 	device_initialize(&cdev->dev);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 3ccca58..47bb47b 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -148,6 +148,10 @@
 {
 	int rc;
 
+	if (!MACHINE_IS_VM) {
+		rc = -EPROTONOSUPPORT;
+		goto out;
+	}
 	rc = driver_register(&smsg_driver);
 	if (rc != 0)
 		goto out;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 86cf10e..a6676be 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -725,7 +725,7 @@
 
 config SCSI_GDTH
 	tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
-	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API && PCI_LEGACY
 	---help---
 	  Formerly called GDT SCSI Disk Array Controller Support.
 
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index 5b0932f..06509bf 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -377,7 +377,7 @@
 
 #define FLASH_RESET			0xF0
 
-#define FLASH_SIZE                      0x200000
+#define ASD_FLASH_SIZE                  0x200000
 #define FLASH_DIR_COOKIE                "*** ADAPTEC FLASH DIRECTORY *** "
 #define FLASH_NEXT_ENTRY_OFFS		0x2000
 #define FLASH_MAX_DIR_ENTRIES		32
@@ -609,7 +609,7 @@
 			      struct asd_flash_dir *flash_dir)
 {
 	u32 v;
-	for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+	for (v = 0; v < ASD_FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
 		asd_read_flash_seg(asd_ha, flash_dir, v,
 				   sizeof(FLASH_DIR_COOKIE)-1);
 		if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 22d91ee..5f2396c 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -556,7 +556,7 @@
 				   unsigned long timeout)
 {
 	u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
-	int request_status;
+	int request_status = 0;
 	int rc;
 
 	/* If we have exhausted our request limit, just fail this request,
@@ -574,6 +574,13 @@
 		if (request_status < -1)
 			goto send_error;
 		/* Otherwise, we may have run out of requests. */
+		/* If request limit was 0 when we started the adapter is in the
+		 * process of performing a login with the server adapter, or
+		 * we may have run out of requests.
+		 */
+		else if (request_status == -1 &&
+		         evt_struct->iu.srp.login_req.opcode != SRP_LOGIN_REQ)
+			goto send_busy;
 		/* Abort and reset calls should make it through.
 		 * Nothing except abort and reset should use the last two
 		 * slots unless we had two or less to begin with.
@@ -633,7 +640,8 @@
 	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
 
 	free_event_struct(&hostdata->pool, evt_struct);
-	atomic_inc(&hostdata->request_limit);
+	if (request_status != -1)
+		atomic_inc(&hostdata->request_limit);
 	return SCSI_MLQUEUE_HOST_BUSY;
 
  send_error:
@@ -927,10 +935,11 @@
 	login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
 	
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	/* Start out with a request limit of 1, since this is negotiated in
-	 * the login request we are just sending
+	/* Start out with a request limit of 0, since this is negotiated in
+	 * the login request we are just sending and login requests always
+	 * get sent by the driver regardless of request_limit.
 	 */
-	atomic_set(&hostdata->request_limit, 1);
+	atomic_set(&hostdata->request_limit, 0);
 
 	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c075556..4e46045 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -682,6 +682,7 @@
 	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
 	struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
 	int datadir = scsi_cmnd->sc_data_direction;
+	char tag[2];
 
 	lpfc_cmd->fcp_rsp->rspSnsLen = 0;
 	/* clear task management bits */
@@ -692,8 +693,8 @@
 
 	memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
 
-	if (scsi_cmnd->device->tagged_supported) {
-		switch (scsi_cmnd->tag) {
+	if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
+		switch (tag[0]) {
 		case HEAD_OF_QUEUE_TAG:
 			fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
 			break;
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 4652ad2..abef704 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -593,10 +593,11 @@
 	if (aux->frame_type != OS_FRAME_TYPE_DATA &&
 	    aux->frame_type != OS_FRAME_TYPE_EOD &&
 	    aux->frame_type != OS_FRAME_TYPE_MARKER) {
-		if (!quiet)
+		if (!quiet) {
 #if DEBUG
 			printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
 #endif
+		}
 		goto err_out;
 	}
 	if (aux->frame_type == OS_FRAME_TYPE_EOD &&
@@ -606,11 +607,12 @@
 		goto err_out;
 	}
         if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
-		if (!quiet)
+		if (!quiet) {
 #if DEBUG
 			printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n", 
 					    name, ntohl(aux->frame_seq_num), frame_seq_number);
 #endif
+		}
 		goto err_out;
 	}
 	if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 4d4c9f0..1f16de7 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -76,7 +76,7 @@
 	}
 }
 
-static void __init putc(struct uart_port *port, int c)
+static void __init serial_putc(struct uart_port *port, int c)
 {
 	wait_for_xmitr(port);
 	serial_out(port, UART_TX, c);
@@ -91,7 +91,7 @@
 	ier = serial_in(port, UART_IER);
 	serial_out(port, UART_IER, 0);
 
-	uart_console_write(port, s, count, putc);
+	uart_console_write(port, s, count, serial_putc);
 
 	/* Wait for transmitter to become empty and restore the IER */
 	wait_for_xmitr(port);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 0e35756..ceb03c9 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1986,6 +1986,7 @@
 
 static int pciserial_resume_one(struct pci_dev *dev)
 {
+	int err;
 	struct serial_private *priv = pci_get_drvdata(dev);
 
 	pci_set_power_state(dev, PCI_D0);
@@ -1995,7 +1996,9 @@
 		/*
 		 * The device may have been disabled.  Re-enable it.
 		 */
-		pci_enable_device(dev);
+		err = pci_enable_device(dev);
+		if (err)
+			return err;
 
 		pciserial_resume_ports(priv);
 	}
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 926f58a..1de098e 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -69,6 +69,8 @@
 	{	"CTL3001",		0	},
 	/* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
 	{	"CTL3011",		0	},
+	/* Davicom ISA 33.6K Modem */
+	{	"DAV0336",		0	},
 	/* Creative */
 	/* Creative Modem Blaster Flash56 DI5601-1 */
 	{	"DMB1032",		0	},
@@ -345,6 +347,11 @@
 	/* Fujitsu Wacom Tablet PC devices */
 	{	"FUJ02E5",		0	},
 	{	"FUJ02E6",		0	},
+	/*
+	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
+	 * disguise)
+	 */
+	{	"LTS0001",		0       },
 	/* Rockwell's (PORALiNK) 33600 INT PNP */
 	{	"WCI0003",		0	},
 	/* Unkown PnP modems */
@@ -432,7 +439,8 @@
 	}
 
 	memset(&port, 0, sizeof(struct uart_port));
-	port.irq = pnp_irq(dev, 0);
+	if (pnp_irq_valid(dev, 0))
+		port.irq = pnp_irq(dev, 0);
 	if (pnp_port_valid(dev, 0)) {
 		port.iobase = pnp_port_start(dev, 0);
 		port.iotype = UPIO_PORT;
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 4d6b3c5..111da57 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -204,8 +204,6 @@
  */
 static void atmel_stop_tx(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
 	UART_PUT_IDR(port, ATMEL_US_TXRDY);
 }
 
@@ -214,8 +212,6 @@
  */
 static void atmel_start_tx(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
 	UART_PUT_IER(port, ATMEL_US_TXRDY);
 }
 
@@ -224,8 +220,6 @@
  */
 static void atmel_stop_rx(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
 	UART_PUT_IDR(port, ATMEL_US_RXRDY);
 }
 
@@ -409,7 +403,6 @@
  */
 static int atmel_startup(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 	int retval;
 
 	/*
@@ -456,8 +449,6 @@
  */
 static void atmel_shutdown(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
 	/*
 	 * Disable all interrupts, port and break condition.
 	 */
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index f523cdf..a4e23cf 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1,426 +1,10 @@
-/* $Id: serial.c,v 1.25 2004/09/29 10:33:49 starvik Exp $
- *
+/*
  * Serial port driver for the ETRAX 100LX chip
  *
- *    Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003  Axis Communications AB
+ *    Copyright (C) 1998-2007  Axis Communications AB
  *
  *    Many, many authors. Based once upon a time on serial.c for 16x50.
  *
- * $Log: serial.c,v $
- * Revision 1.25  2004/09/29 10:33:49  starvik
- * Resolved a dealock when printing debug from kernel.
- *
- * Revision 1.24  2004/08/27 23:25:59  johana
- * rs_set_termios() must call change_speed() if c_iflag has changed or
- * automatic XOFF handling will be enabled and transmitter will stop
- * if 0x13 is received.
- *
- * Revision 1.23  2004/08/24 06:57:13  starvik
- * More whitespace cleanup
- *
- * Revision 1.22  2004/08/24 06:12:20  starvik
- * Whitespace cleanup
- *
- * Revision 1.20  2004/05/24 12:00:20  starvik
- * Big merge of stuff from Linux 2.4 (e.g. manual mode for the serial port).
- *
- * Revision 1.19  2004/05/17 13:12:15  starvik
- * Kernel console hook
- * Big merge from Linux 2.4 still pending.
- *
- * Revision 1.18  2003/10/28 07:18:30  starvik
- * Compiles with debug info
- *
- * Revision 1.17  2003/07/04 08:27:37  starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.16  2003/06/13 10:05:19  johana
- * Help the user to avoid trouble by:
- * Forcing mixed mode for status/control lines if not all pins are used.
- *
- * Revision 1.15  2003/06/13 09:43:01  johana
- * Merged in the following changes from os/linux/arch/cris/drivers/serial.c
- * + some minor changes to reduce diff.
- *
- * Revision 1.49  2003/05/30 11:31:54  johana
- * Merged in change-branch--serial9bit that adds CMSPAR support for sticky
- * parity (mark/space)
- *
- * Revision 1.48  2003/05/30 11:03:57  johana
- * Implemented rs_send_xchar() by disabling the DMA and writing manually.
- * Added e100_disable_txdma_channel() and e100_enable_txdma_channel().
- * Fixed rs_throttle() and rs_unthrottle() to properly call rs_send_xchar
- * instead of setting info->x_char and check the CRTSCTS flag before
- * controlling the rts pin.
- *
- * Revision 1.14  2003/04/09 08:12:44  pkj
- * Corrected typo changes made upstream.
- *
- * Revision 1.13  2003/04/09 05:20:47  starvik
- * Merge of Linux 2.5.67
- *
- * Revision 1.11  2003/01/22 06:48:37  starvik
- * Fixed warnings issued by GCC 3.2.1
- *
- * Revision 1.9  2002/12/13 09:07:47  starvik
- * Alert user that RX_TIMEOUT_TICKS==0 doesn't work
- *
- * Revision 1.8  2002/12/11 13:13:57  starvik
- * Added arch/ to v10 specific includes
- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
- *
- * Revision 1.7  2002/12/06 07:13:57  starvik
- * Corrected work queue stuff
- * Removed CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
- *
- * Revision 1.6  2002/11/21 07:17:46  starvik
- * Change static inline to extern inline where otherwise outlined with gcc-3.2
- *
- * Revision 1.5  2002/11/14 15:59:49  starvik
- * Linux 2.5 port of the latest serial driver from 2.4. The work queue stuff
- * probably doesn't work yet.
- *
- * Revision 1.42  2002/11/05 09:08:47  johana
- * Better implementation of rs_stop() and rs_start() that uses the XOFF
- * register to start/stop transmission.
- * change_speed() also initilises XOFF register correctly so that
- * auto_xoff is enabled when IXON flag is set by user.
- * This gives fast XOFF response times.
- *
- * Revision 1.41  2002/11/04 18:40:57  johana
- * Implemented rs_stop() and rs_start().
- * Simple tests using hwtestserial indicates that this should be enough
- * to make it work.
- *
- * Revision 1.40  2002/10/14 05:33:18  starvik
- * RS-485 uses fast timers even if SERIAL_FAST_TIMER is disabled
- *
- * Revision 1.39  2002/09/30 21:00:57  johana
- * Support for CONFIG_ETRAX_SERx_DTR_RI_DSR_CD_MIXED where the status and
- * control pins can be mixed between PA and PB.
- * If no serial port uses MIXED old solution is used
- * (saves a few bytes and cycles).
- * control_pins struct uses masks instead of bit numbers.
- * Corrected dummy values and polarity in line_info() so
- * /proc/tty/driver/serial is now correct.
- * (the E100_xxx_GET() macros is really active low - perhaps not obvious)
- *
- * Revision 1.38  2002/08/23 11:01:36  starvik
- * Check that serial port is enabled in all interrupt handlers to avoid
- * restarts of DMA channels not assigned to serial ports
- *
- * Revision 1.37  2002/08/13 13:02:37  bjornw
- * Removed some warnings because of unused code
- *
- * Revision 1.36  2002/08/08 12:50:01  starvik
- * Serial interrupt is shared with synchronous serial port driver
- *
- * Revision 1.35  2002/06/03 10:40:49  starvik
- * Increased RS-485 RTS toggle timer to 2 characters
- *
- * Revision 1.34  2002/05/28 18:59:36  johana
- * Whitespace and comment fixing to be more like etrax100ser.c 1.71.
- *
- * Revision 1.33  2002/05/28 17:55:43  johana
- * RS-485 uses FAST_TIMER if enabled, and starts a short (one char time)
- * timer from tranismit_chars (interrupt context).
- * The timer toggles RTS in interrupt context when expired giving minimum
- * latencies.
- *
- * Revision 1.32  2002/05/22 13:58:00  johana
- * Renamed rs_write() to raw_write() and made it inline.
- * New rs_write() handles RS-485 if configured and enabled
- * (moved code from e100_write_rs485()).
- * RS-485 ioctl's uses copy_from_user() instead of verify_area().
- *
- * Revision 1.31  2002/04/22 11:20:03  johana
- * Updated copyright years.
- *
- * Revision 1.30  2002/04/22 09:39:12  johana
- * RS-485 support compiles.
- *
- * Revision 1.29  2002/01/14 16:10:01  pkj
- * Allocate the receive buffers dynamically. The static 4kB buffer was
- * too small for the peaks. This means that we can get rid of the extra
- * buffer and the copying to it. It also means we require less memory
- * under normal operations, but can use more when needed (there is a
- * cap at 64kB for safety reasons). If there is no memory available
- * we panic(), and die a horrible death...
- *
- * Revision 1.28  2001/12/18 15:04:53  johana
- * Cleaned up write_rs485() - now it works correctly without padding extra
- * char.
- * Added sane default initialisation of rs485.
- * Added #ifdef around dummy variables.
- *
- * Revision 1.27  2001/11/29 17:00:41  pkj
- * 2kB seems to be too small a buffer when using 921600 bps,
- * so increase it to 4kB (this was already done for the elinux
- * version of the serial driver).
- *
- * Revision 1.26  2001/11/19 14:20:41  pkj
- * Minor changes to comments and unused code.
- *
- * Revision 1.25  2001/11/12 20:03:43  pkj
- * Fixed compiler warnings.
- *
- * Revision 1.24  2001/11/12 15:10:05  pkj
- * Total redesign of the receiving part of the serial driver.
- * Uses eight chained descriptors to write to a 4kB buffer.
- * This data is then serialised into a 2kB buffer. From there it
- * is copied into the TTY's flip buffers when they become available.
- * A lot of copying, and the sizes of the buffers might need to be
- * tweaked, but all in all it should work better than the previous
- * version, without the need to modify the TTY code in any way.
- * Also note that erroneous bytes are now correctly marked in the
- * flag buffers (instead of always marking the first byte).
- *
- * Revision 1.23  2001/10/30 17:53:26  pkj
- * * Set info->uses_dma to 0 when a port is closed.
- * * Mark the timer1 interrupt as a fast one (SA_INTERRUPT).
- * * Call start_flush_timer() in start_receive() if
- *   CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is defined.
- *
- * Revision 1.22  2001/10/30 17:44:03  pkj
- * Use %lu for received and transmitted counters in line_info().
- *
- * Revision 1.21  2001/10/30 17:40:34  pkj
- * Clean-up. The only change to functionality is that
- * CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS(=5) is used instead of
- * MAX_FLUSH_TIME(=8).
- *
- * Revision 1.20  2001/10/30 15:24:49  johana
- * Added char_time stuff from 2.0 driver.
- *
- * Revision 1.19  2001/10/30 15:23:03  johana
- * Merged with 1.13.2 branch + fixed indentation
- * and changed CONFIG_ETRAX100_XYS to CONFIG_ETRAX_XYZ
- *
- * Revision 1.18  2001/09/24 09:27:22  pkj
- * Completed ext_baud_table[] in cflag_to_baud() and cflag_to_etrax_baud().
- *
- * Revision 1.17  2001/08/24 11:32:49  ronny
- * More fixes for the CONFIG_ETRAX_SERIAL_PORT0 define.
- *
- * Revision 1.16  2001/08/24 07:56:22  ronny
- * Added config ifdefs around ser0 irq requests.
- *
- * Revision 1.15  2001/08/16 09:10:31  bjarne
- * serial.c - corrected the initialization of rs_table, the wrong defines
- *            where used.
- *            Corrected a test in timed_flush_handler.
- *            Changed configured to enabled.
- * serial.h - Changed configured to enabled.
- *
- * Revision 1.14  2001/08/15 07:31:23  bjarne
- * Introduced two new members to the e100_serial struct.
- * configured - Will be set to 1 if the port has been configured in .config
- * uses_dma   - Should be set to 1 if the port uses DMA. Currently it is set
- *              to 1
- *              when a port is opened. This is used to limit the DMA interrupt
- *              routines to only manipulate DMA channels actually used by the
- *              serial driver.
- *
- * Revision 1.13.2.2  2001/10/17 13:57:13  starvik
- * Receiver was broken by the break fixes
- *
- * Revision 1.13.2.1  2001/07/20 13:57:39  ronny
- * Merge with new stuff from etrax100ser.c. Works but haven't checked stuff
- * like break handling.
- *
- * Revision 1.13  2001/05/09 12:40:31  johana
- * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
- *
- * Revision 1.12  2001/04/19 12:23:07  bjornw
- * CONFIG_RS485 -> CONFIG_ETRAX_RS485
- *
- * Revision 1.11  2001/04/05 14:29:48  markusl
- * Updated according to review remarks i.e.
- * -Use correct types in port structure to avoid compiler warnings
- * -Try to use IO_* macros whenever possible
- * -Open should never return -EBUSY
- *
- * Revision 1.10  2001/03/05 13:14:07  bjornw
- * Another spelling fix
- *
- * Revision 1.9  2001/02/23 13:46:38  bjornw
- * Spellling check
- *
- * Revision 1.8  2001/01/23 14:56:35  markusl
- * Made use of ser1 optional
- * Needed by USB
- *
- * Revision 1.7  2001/01/19 16:14:48  perf
- * Added kernel options for serial ports 234.
- * Changed option names from CONFIG_ETRAX100_XYZ to CONFIG_ETRAX_XYZ.
- *
- * Revision 1.6  2000/11/22 16:36:09  bjornw
- * Please marketing by using the correct case when spelling Etrax.
- *
- * Revision 1.5  2000/11/21 16:43:37  bjornw
- * Fixed so it compiles under CONFIG_SVINTO_SIM
- *
- * Revision 1.4  2000/11/15 17:34:12  bjornw
- * Added a timeout timer for flushing input channels. The interrupt-based
- * fast flush system should be easy to merge with this later (works the same
- * way, only with an irq instead of a system timer_list)
- *
- * Revision 1.3  2000/11/13 17:19:57  bjornw
- * * Incredibly, this almost complete rewrite of serial.c worked (at least
- *   for output) the first time.
- *
- *   Items worth noticing:
- *
- *      No Etrax100 port 1 workarounds (does only compile on 2.4 anyway now)
- *      RS485 is not ported (why can't it be done in userspace as on x86 ?)
- *      Statistics done through async_icount - if any more stats are needed,
- *      that's the place to put them or in an arch-dep version of it.
- *      timeout_interrupt and the other fast timeout stuff not ported yet
- *      There be dragons in this 3k+ line driver
- *
- * Revision 1.2  2000/11/10 16:50:28  bjornw
- * First shot at a 2.4 port, does not compile totally yet
- *
- * Revision 1.1  2000/11/10 16:47:32  bjornw
- * Added verbatim copy of rev 1.49 etrax100ser.c from elinux
- *
- * Revision 1.49  2000/10/30 15:47:14  tobiasa
- * Changed version number.
- *
- * Revision 1.48  2000/10/25 11:02:43  johana
- * Changed %ul to %lu in printf's
- *
- * Revision 1.47  2000/10/18 15:06:53  pkj
- * Compile correctly with CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST and
- * CONFIG_ETRAX_SERIAL_PROC_ENTRY together.
- * Some clean-up of the /proc/serial file.
- *
- * Revision 1.46  2000/10/16 12:59:40  johana
- * Added CONFIG_ETRAX_SERIAL_PROC_ENTRY for statistics and debug info.
- *
- * Revision 1.45  2000/10/13 17:10:59  pkj
- * Do not flush DMAs while flipping TTY buffers.
- *
- * Revision 1.44  2000/10/13 16:34:29  pkj
- * Added a delay in ser_interrupt() for 2.3ms when an error is detected.
- * We do not know why this delay is required yet, but without it the
- * irmaflash program does not work (this was the program that needed
- * the ser_interrupt() to be needed in the first place). This should not
- * affect normal use of the serial ports.
- *
- * Revision 1.43  2000/10/13 16:30:44  pkj
- * New version of the fast flush of serial buffers code. This time
- * it is localized to the serial driver and uses a fast timer to
- * do the work.
- *
- * Revision 1.42  2000/10/13 14:54:26  bennyo
- * Fix for switching RTS when using rs485
- *
- * Revision 1.41  2000/10/12 11:43:44  pkj
- * Cleaned up a number of comments.
- *
- * Revision 1.40  2000/10/10 11:58:39  johana
- * Made RS485 support generic for all ports.
- * Toggle rts in interrupt if no delay wanted.
- * WARNING: No true transmitter empty check??
- * Set d_wait bit when sending data so interrupt is delayed until
- * fifo flushed. (Fix tcdrain() problem)
- *
- * Revision 1.39  2000/10/04 16:08:02  bjornw
- * * Use virt_to_phys etc. for DMA addresses
- * * Removed CONFIG_FLUSH_DMA_FAST hacks
- * * Indentation fix
- *
- * Revision 1.38  2000/10/02 12:27:10  mattias
- * * added variable used when using fast flush on serial dma.
- *   (CONFIG_FLUSH_DMA_FAST)
- *
- * Revision 1.37  2000/09/27 09:44:24  pkj
- * Uncomment definition of SERIAL_HANDLE_EARLY_ERRORS.
- *
- * Revision 1.36  2000/09/20 13:12:52  johana
- * Support for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS:
- *   Number of timer ticks between flush of receive fifo (1 tick = 10ms).
- *   Try 0-3 for low latency applications. Approx 5 for high load
- *   applications (e.g. PPP). Maybe this should be more adaptive some day...
- *
- * Revision 1.35  2000/09/20 10:36:08  johana
- * Typo in get_lsr_info()
- *
- * Revision 1.34  2000/09/20 10:29:59  johana
- * Let rs_chars_in_buffer() check fifo content as well.
- * get_lsr_info() might work now (not tested).
- * Easier to change the port to debug.
- *
- * Revision 1.33  2000/09/13 07:52:11  torbjore
- * Support RS485
- *
- * Revision 1.32  2000/08/31 14:45:37  bjornw
- * After sending a break we need to reset the transmit DMA channel
- *
- * Revision 1.31  2000/06/21 12:13:29  johana
- * Fixed wait for all chars sent when closing port.
- * (Used to always take 1 second!)
- * Added shadows for directions of status/ctrl signals.
- *
- * Revision 1.30  2000/05/29 16:27:55  bjornw
- * Simulator ifdef moved a bit
- *
- * Revision 1.29  2000/05/09 09:40:30  mattias
- * * Added description of dma registers used in timeout_interrupt
- * * Removed old code
- *
- * Revision 1.28  2000/05/08 16:38:58  mattias
- * * Bugfix for flushing fifo in timeout_interrupt
- *   Problem occurs when bluetooth stack waits for a small number of bytes
- *   containing an event acknowledging free buffers in bluetooth HW
- *   As before, data was stuck in fifo until more data came on uart and
- *   flushed it up to the stack.
- *
- * Revision 1.27  2000/05/02 09:52:28  jonasd
- * Added fix for peculiar etrax behaviour when eop is forced on an empty
- * fifo. This is used when flashing the IRMA chip. Disabled by default.
- *
- * Revision 1.26  2000/03/29 15:32:02  bjornw
- * 2.0.34 updates
- *
- * Revision 1.25  2000/02/16 16:59:36  bjornw
- * * Receive DMA directly into the flip-buffer, eliminating an intermediary
- *   receive buffer and a memcpy. Will avoid some overruns.
- * * Error message on debug port if an overrun or flip buffer overrun occurs.
- * * Just use the first byte in the flag flip buffer for errors.
- * * Check for timeout on the serial ports only each 5/100 s, not 1/100.
- *
- * Revision 1.24  2000/02/09 18:02:28  bjornw
- * * Clear serial errors (overrun, framing, parity) correctly. Before, the
- *   receiver would get stuck if an error occurred and we did not restart
- *   the input DMA.
- * * Cosmetics (indentation, some code made into inlines)
- * * Some more debug options
- * * Actually shut down the serial port (DMA irq, DMA reset, receiver stop)
- *   when the last open is closed. Corresponding fixes in startup().
- * * rs_close() "tx FIFO wait" code moved into right place, bug & -> && fixed
- *   and make a special case out of port 1 (R_DMA_CHx_STATUS is broken for that)
- * * e100_disable_rx/enable_rx just disables/enables the receiver, not RTS
- *
- * Revision 1.23  2000/01/24 17:46:19  johana
- * Wait for flush of DMA/FIFO when closing port.
- *
- * Revision 1.22  2000/01/20 18:10:23  johana
- * Added TIOCMGET ioctl to return modem status.
- * Implemented modem status/control that works with the extra signals
- * (DTR, DSR, RI,CD) as well.
- * 3 different modes supported:
- * ser0 on PB (Bundy), ser1 on PB (Lisa) and ser2 on PA (Bundy)
- * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
- * closing the last filehandle, NASTY!.
- * Added break generation, not tested though!
- * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1.
- * You can't use them at the same time (yet..), but you can hopefully switch
- * between ser2/par0, ser3/par1 with the same kernel config.
- * Replaced some magic constants with defines
- *
- *
  */
 
 static char *serial_version = "$Revision: 1.25 $";
@@ -446,6 +30,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/dma.h>
 #include <asm/system.h>
 #include <linux/delay.h>
 
@@ -454,8 +39,9 @@
 /* non-arch dependent serial structures are in linux/serial.h */
 #include <linux/serial.h>
 /* while we keep our own stuff (struct e100_serial) in a local .h file */
-#include "serial.h"
+#include "crisv10.h"
 #include <asm/fasttimer.h>
+#include <asm/arch/io_interface_mux.h>
 
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
 #ifndef CONFIG_ETRAX_FAST_TIMER
@@ -504,18 +90,6 @@
    from eLinux */
 #define SERIAL_HANDLE_EARLY_ERRORS
 
-/* Defined and used in n_tty.c, but we need it here as well */
-#define TTY_THRESHOLD_THROTTLE 128
-
-/* Due to buffersizes and threshold values, our SERIAL_DESCR_BUF_SIZE
- * must not be to high or flow control won't work if we leave it to the tty
- * layer so we have our own throttling in flush_to_flip
- * TTY_FLIPBUF_SIZE=512,
- * TTY_THRESHOLD_THROTTLE/UNTHROTTLE=128
- * BUF_SIZE can't be > 128
- */
-#define CRIS_BUF_SIZE	512
-
 /* Currently 16 descriptors x 128 bytes = 2048 bytes */
 #define SERIAL_DESCR_BUF_SIZE 256
 
@@ -588,13 +162,13 @@
 static void change_speed(struct e100_serial *info);
 static void rs_throttle(struct tty_struct * tty);
 static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-static int rs_write(struct tty_struct * tty, int from_user,
-                    const unsigned char *buf, int count);
+static int rs_write(struct tty_struct *tty,
+		const unsigned char *buf, int count);
 #ifdef CONFIG_ETRAX_RS485
-static int e100_write_rs485(struct tty_struct * tty, int from_user,
-                            const unsigned char *buf, int count);
+static int e100_write_rs485(struct tty_struct *tty,
+		const unsigned char *buf, int count);
 #endif
-static int get_lsr_info(struct e100_serial * info, unsigned int *value);
+static int get_lsr_info(struct e100_serial *info, unsigned int *value);
 
 
 #define DEF_BAUD 115200   /* 115.2 kbit/s */
@@ -679,20 +253,39 @@
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 2,
+	  .dma_owner   = dma_ser0,
+	  .io_if       = if_serial_0,
 #ifdef CONFIG_ETRAX_SERIAL_PORT0
           .enabled  = 1,
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
 	  .dma_out_enabled = 1,
+	  .dma_out_nbr = SER0_TX_DMA_NBR,
+	  .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
+	  .dma_out_irq_flags = IRQF_DISABLED,
+	  .dma_out_irq_description = "serial 0 dma tr",
 #else
 	  .dma_out_enabled = 0,
+	  .dma_out_nbr = UINT_MAX,
+	  .dma_out_irq_nbr = 0,
+	  .dma_out_irq_flags = 0,
+	  .dma_out_irq_description = NULL,
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
 	  .dma_in_enabled = 1,
+	  .dma_in_nbr = SER0_RX_DMA_NBR,
+	  .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
+	  .dma_in_irq_flags = IRQF_DISABLED,
+	  .dma_in_irq_description = "serial 0 dma rec",
 #else
-	  .dma_in_enabled = 0
+	  .dma_in_enabled = 0,
+	  .dma_in_nbr = UINT_MAX,
+	  .dma_in_irq_nbr = 0,
+	  .dma_in_irq_flags = 0,
+	  .dma_in_irq_description = NULL,
 #endif
 #else
           .enabled  = 0,
+	  .io_if_description = NULL,
 	  .dma_out_enabled = 0,
 	  .dma_in_enabled = 0
 #endif
@@ -714,20 +307,42 @@
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 3,
+	  .dma_owner   = dma_ser1,
+	  .io_if       = if_serial_1,
 #ifdef CONFIG_ETRAX_SERIAL_PORT1
           .enabled  = 1,
+	  .io_if_description = "ser1",
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
 	  .dma_out_enabled = 1,
+	  .dma_out_nbr = SER1_TX_DMA_NBR,
+	  .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
+	  .dma_out_irq_flags = IRQF_DISABLED,
+	  .dma_out_irq_description = "serial 1 dma tr",
 #else
 	  .dma_out_enabled = 0,
+	  .dma_out_nbr = UINT_MAX,
+	  .dma_out_irq_nbr = 0,
+	  .dma_out_irq_flags = 0,
+	  .dma_out_irq_description = NULL,
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
 	  .dma_in_enabled = 1,
+	  .dma_in_nbr = SER1_RX_DMA_NBR,
+	  .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
+	  .dma_in_irq_flags = IRQF_DISABLED,
+	  .dma_in_irq_description = "serial 1 dma rec",
 #else
-	  .dma_in_enabled = 0
+	  .dma_in_enabled = 0,
+	  .dma_in_enabled = 0,
+	  .dma_in_nbr = UINT_MAX,
+	  .dma_in_irq_nbr = 0,
+	  .dma_in_irq_flags = 0,
+	  .dma_in_irq_description = NULL,
 #endif
 #else
           .enabled  = 0,
+	  .io_if_description = NULL,
+	  .dma_in_irq_nbr = 0,
 	  .dma_out_enabled = 0,
 	  .dma_in_enabled = 0
 #endif
@@ -748,20 +363,40 @@
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 0,
+	  .dma_owner   = dma_ser2,
+	  .io_if       = if_serial_2,
 #ifdef CONFIG_ETRAX_SERIAL_PORT2
           .enabled  = 1,
+	  .io_if_description = "ser2",
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
 	  .dma_out_enabled = 1,
+	  .dma_out_nbr = SER2_TX_DMA_NBR,
+	  .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
+	  .dma_out_irq_flags = IRQF_DISABLED,
+	  .dma_out_irq_description = "serial 2 dma tr",
 #else
 	  .dma_out_enabled = 0,
+	  .dma_out_nbr = UINT_MAX,
+	  .dma_out_irq_nbr = 0,
+	  .dma_out_irq_flags = 0,
+	  .dma_out_irq_description = NULL,
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
 	  .dma_in_enabled = 1,
+	  .dma_in_nbr = SER2_RX_DMA_NBR,
+	  .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
+	  .dma_in_irq_flags = IRQF_DISABLED,
+	  .dma_in_irq_description = "serial 2 dma rec",
 #else
-	  .dma_in_enabled = 0
+	  .dma_in_enabled = 0,
+	  .dma_in_nbr = UINT_MAX,
+	  .dma_in_irq_nbr = 0,
+	  .dma_in_irq_flags = 0,
+	  .dma_in_irq_description = NULL,
 #endif
 #else
           .enabled  = 0,
+	  .io_if_description = NULL,
 	  .dma_out_enabled = 0,
 	  .dma_in_enabled = 0
 #endif
@@ -782,20 +417,40 @@
 	  .rx_ctrl     = DEF_RX,
 	  .tx_ctrl     = DEF_TX,
 	  .iseteop     = 1,
+	  .dma_owner   = dma_ser3,
+	  .io_if       = if_serial_3,
 #ifdef CONFIG_ETRAX_SERIAL_PORT3
           .enabled  = 1,
+	  .io_if_description = "ser3",
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
 	  .dma_out_enabled = 1,
+	  .dma_out_nbr = SER3_TX_DMA_NBR,
+	  .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
+	  .dma_out_irq_flags = IRQF_DISABLED,
+	  .dma_out_irq_description = "serial 3 dma tr",
 #else
 	  .dma_out_enabled = 0,
+	  .dma_out_nbr = UINT_MAX,
+	  .dma_out_irq_nbr = 0,
+	  .dma_out_irq_flags = 0,
+	  .dma_out_irq_description = NULL,
 #endif
 #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
 	  .dma_in_enabled = 1,
+	  .dma_in_nbr = SER3_RX_DMA_NBR,
+	  .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
+	  .dma_in_irq_flags = IRQF_DISABLED,
+	  .dma_in_irq_description = "serial 3 dma rec",
 #else
-	  .dma_in_enabled = 0
+	  .dma_in_enabled = 0,
+	  .dma_in_nbr = UINT_MAX,
+	  .dma_in_irq_nbr = 0,
+	  .dma_in_irq_flags = 0,
+	  .dma_in_irq_description = NULL
 #endif
 #else
           .enabled  = 0,
+	  .io_if_description = NULL,
 	  .dma_out_enabled = 0,
 	  .dma_in_enabled = 0
 #endif
@@ -1416,12 +1071,11 @@
 	{
 		unsigned long flags;
 
-		save_flags(flags);
-		cli();
+		local_irq_save(flags);
 		*e100_modem_pins[info->line].dtr_shadow &= ~mask;
 		*e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
 		*e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
-		restore_flags(flags);
+		local_irq_restore(flags);
 	}
 
 #ifdef SERIAL_DEBUG_IO
@@ -1440,12 +1094,11 @@
 {
 #ifndef CONFIG_SVINTO_SIM
 	unsigned long flags;
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	info->rx_ctrl &= ~E100_RTS_MASK;
 	info->rx_ctrl |= (set ? 0 : E100_RTS_MASK);  /* RTS is active low */
 	info->port[REG_REC_CTRL] = info->rx_ctrl;
-	restore_flags(flags);
+	local_irq_restore(flags);
 #ifdef SERIAL_DEBUG_IO
 	printk("ser%i rts %i\n", info->line, set);
 #endif
@@ -1463,12 +1116,11 @@
 		unsigned char mask = e100_modem_pins[info->line].ri_mask;
 		unsigned long flags;
 
-		save_flags(flags);
-		cli();
+		local_irq_save(flags);
 		*e100_modem_pins[info->line].ri_shadow &= ~mask;
 		*e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
 		*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
-		restore_flags(flags);
+		local_irq_restore(flags);
 	}
 #endif
 }
@@ -1481,12 +1133,11 @@
 		unsigned char mask = e100_modem_pins[info->line].cd_mask;
 		unsigned long flags;
 
-		save_flags(flags);
-		cli();
+		local_irq_save(flags);
 		*e100_modem_pins[info->line].cd_shadow &= ~mask;
 		*e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
 		*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
-		restore_flags(flags);
+		local_irq_restore(flags);
 	}
 #endif
 }
@@ -1560,8 +1211,7 @@
 	/* Disable output DMA channel for the serial port in question
 	 * ( set to something other then serialX)
 	 */
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
 	if (info->line == 0) {
 		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
@@ -1589,7 +1239,7 @@
 		}
 	}
 	*R_GEN_CONFIG = genconfig_shadow;
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 
@@ -1597,8 +1247,7 @@
 {
 	unsigned long flags;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
 	/* Enable output DMA channel for the serial port in question */
 	if (info->line == 0) {
@@ -1615,7 +1264,7 @@
 		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
 	}
 	*R_GEN_CONFIG = genconfig_shadow;
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 static void e100_disable_rxdma_channel(struct e100_serial *info)
@@ -1625,8 +1274,7 @@
 	/* Disable input DMA channel for the serial port in question
 	 * ( set to something other then serialX)
 	 */
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	if (info->line == 0) {
 		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
 		    IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
@@ -1653,7 +1301,7 @@
 		}
 	}
 	*R_GEN_CONFIG = genconfig_shadow;
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 
@@ -1661,8 +1309,7 @@
 {
 	unsigned long flags;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	/* Enable input DMA channel for the serial port in question */
 	if (info->line == 0) {
 		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma7);
@@ -1678,7 +1325,7 @@
 		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
 	}
 	*R_GEN_CONFIG = genconfig_shadow;
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 #ifdef SERIAL_HANDLE_EARLY_ERRORS
@@ -1785,7 +1432,7 @@
 }
 
 static int
-e100_write_rs485(struct tty_struct *tty, int from_user,
+e100_write_rs485(struct tty_struct *tty,
                  const unsigned char *buf, int count)
 {
 	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
@@ -1798,7 +1445,7 @@
 	 */
 	info->rs485.enabled = 1;
 	/* rs_write now deals with RS485 if enabled */
-	count = rs_write(tty, from_user, buf, count);
+	count = rs_write(tty, buf, count);
 	info->rs485.enabled = old_enabled;
 	return count;
 }
@@ -1836,7 +1483,7 @@
 		unsigned long flags;
 		unsigned long xoff;
 
-		save_flags(flags); cli();
+		local_irq_save(flags);
 		DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
 				CIRC_CNT(info->xmit.head,
 					 info->xmit.tail,SERIAL_XMIT_SIZE)));
@@ -1848,7 +1495,7 @@
 		}
 
 		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
-		restore_flags(flags);
+		local_irq_restore(flags);
 	}
 }
 
@@ -1860,7 +1507,7 @@
 		unsigned long flags;
 		unsigned long xoff;
 
-		save_flags(flags); cli();
+		local_irq_save(flags);
 		DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
 				CIRC_CNT(info->xmit.head,
 					 info->xmit.tail,SERIAL_XMIT_SIZE)));
@@ -1875,7 +1522,7 @@
 		    info->xmit.head != info->xmit.tail && info->xmit.buf)
 			e100_enable_serial_tx_ready_irq(info);
 
-		restore_flags(flags);
+		local_irq_restore(flags);
 	}
 }
 
@@ -2055,8 +1702,7 @@
 static void flush_timeout_function(unsigned long data);
 #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
   unsigned long timer_flags; \
-  save_flags(timer_flags); \
-  cli(); \
+  local_irq_save(timer_flags); \
   if (fast_timers[info->line].function == NULL) { \
     serial_fast_timer_started++; \
     TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
@@ -2070,7 +1716,7 @@
   else { \
     TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
   } \
-  restore_flags(timer_flags); \
+  local_irq_restore(timer_flags); \
 }
 #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
 
@@ -2099,8 +1745,7 @@
 {
 	unsigned long flags;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 
 	if (!info->first_recv_buffer)
 		info->first_recv_buffer = buffer;
@@ -2113,7 +1758,7 @@
 	if (info->recv_cnt > info->max_recv_cnt)
 		info->max_recv_cnt = info->recv_cnt;
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 static int
@@ -2133,11 +1778,7 @@
 		info->icount.rx++;
 	} else {
 		struct tty_struct *tty = info->tty;
-		*tty->flip.char_buf_ptr = data;
-		*tty->flip.flag_buf_ptr = flag;
-		tty->flip.flag_buf_ptr++;
-		tty->flip.char_buf_ptr++;
-		tty->flip.count++;
+		tty_insert_flip_char(tty, data, flag);
 		info->icount.rx++;
 	}
 
@@ -2322,7 +1963,6 @@
 	 */
 	return;
 #endif
-	info->tty->flip.count = 0;
 	if (info->uses_dma_in) {
 		/* reset the input dma channel to be sure it works */
 
@@ -2484,32 +2124,20 @@
 {
 	struct tty_struct *tty;
 	struct etrax_recv_buffer *buffer;
-	unsigned int length;
 	unsigned long flags;
-	int max_flip_size;
 
-	if (!info->first_recv_buffer)
-		return;
+	local_irq_save(flags);
+	tty = info->tty;
 
-	save_flags(flags);
-	cli();
-
-	if (!(tty = info->tty)) {
-		restore_flags(flags);
+	if (!tty) {
+		local_irq_restore(flags);
 		return;
 	}
 
 	while ((buffer = info->first_recv_buffer) != NULL) {
 		unsigned int count = buffer->length;
 
-		count = tty_buffer_request_room(tty, count);
-		if (count == 0) /* Throttle ?? */
-			break;
-
-		if (count > 1)
-			tty_insert_flip_strings(tty, buffer->buffer, count - 1);
-		tty_insert_flip_char(tty, buffer->buffer[count-1], buffer->error);
-
+		tty_insert_flip_string(tty, buffer->buffer, count);
 		info->recv_cnt -= count;
 
 		if (count == buffer->length) {
@@ -2525,18 +2153,9 @@
 	if (!info->first_recv_buffer)
 		info->last_recv_buffer = NULL;
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 
-	DFLIP(
-	  if (1) {
-		  DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
-		  DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
-		  DEBUG_LOG(info->line, "room  %lu\n", tty->ldisc.receive_room(tty));
-	  }
-
-	);
-
-	/* this includes a check for low-latency */
+	/* This includes a check for low-latency */
 	tty_flip_buffer_push(tty);
 }
 
@@ -2679,21 +2298,7 @@
 		printk("!NO TTY!\n");
 		return info;
 	}
-	if (tty->flip.count >= CRIS_BUF_SIZE - TTY_THRESHOLD_THROTTLE) {
-		/* check TTY_THROTTLED first so it indicates our state */
-		if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
-			DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count));
-			rs_throttle(tty);
-		}
-	}
-	if (tty->flip.count >= CRIS_BUF_SIZE) {
-		DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count);
-		tty->flip.work.func((void *) tty);
-		if (tty->flip.count >= CRIS_BUF_SIZE) {
-			DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count);
-			return info;		/* if TTY_DONT_FLIP is set */
-		}
-	}
+
 	/* Read data and status at the same time */
 	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
 more_data:
@@ -2746,27 +2351,26 @@
 				DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
 				info->errorcode = ERRCODE_INSERT_BREAK;
 			} else {
+				unsigned char data = IO_EXTRACT(R_SERIAL0_READ,
+					data_in, data_read);
+				char flag = TTY_NORMAL;
 				if (info->errorcode == ERRCODE_INSERT_BREAK) {
-					info->icount.brk++;
-					*tty->flip.char_buf_ptr = 0;
-					*tty->flip.flag_buf_ptr = TTY_BREAK;
-					tty->flip.flag_buf_ptr++;
-					tty->flip.char_buf_ptr++;
-					tty->flip.count++;
+					struct tty_struct *tty = info->tty;
+					tty_insert_flip_char(tty, 0, flag);
 					info->icount.rx++;
 				}
-				*tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
 
 				if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
 					info->icount.parity++;
-					*tty->flip.flag_buf_ptr = TTY_PARITY;
+					flag = TTY_PARITY;
 				} else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
 					info->icount.overrun++;
-					*tty->flip.flag_buf_ptr = TTY_OVERRUN;
+					flag = TTY_OVERRUN;
 				} else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
 					info->icount.frame++;
-					*tty->flip.flag_buf_ptr = TTY_FRAME;
+					flag = TTY_FRAME;
 				}
+				tty_insert_flip_char(tty, data, flag);
 				info->errorcode = 0;
 			}
 			info->break_detected_cnt = 0;
@@ -2782,16 +2386,14 @@
 			log_int(rdpc(), 0, 0);
 		}
 		);
-		*tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
-		*tty->flip.flag_buf_ptr = 0;
+		tty_insert_flip_char(tty,
+			IO_EXTRACT(R_SERIAL0_READ, data_in, data_read),
+			TTY_NORMAL);
 	} else {
 		DEBUG_LOG(info->line, "ser_rx int but no data_avail  %08lX\n", data_read);
 	}
 
 
-	tty->flip.flag_buf_ptr++;
-	tty->flip.char_buf_ptr++;
-	tty->flip.count++;
 	info->icount.rx++;
 	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
 	if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
@@ -2929,7 +2531,7 @@
 	if (info->x_char) {
 		unsigned char rstat;
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
-		save_flags(flags); cli();
+		local_irq_save(flags);
 		rstat = info->port[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 
@@ -2938,7 +2540,7 @@
 		info->x_char = 0;
 		/* We must enable since it is disabled in ser_interrupt */
 		e100_enable_serial_tx_ready_irq(info);
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 	if (info->uses_dma_out) {
@@ -2946,7 +2548,7 @@
 		int i;
 		/* We only use normal tx interrupt when sending x_char */
 		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
-		save_flags(flags); cli();
+		local_irq_save(flags);
 		rstat = info->port[REG_STATUS];
 		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
 		e100_disable_serial_tx_ready_irq(info);
@@ -2959,7 +2561,7 @@
 			nop();
 
 		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 	/* Normal char-by-char interrupt */
@@ -2973,7 +2575,7 @@
 	}
 	DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
 	/* Send a byte, rs485 timing is critical so turn of ints */
-	save_flags(flags); cli();
+	local_irq_save(flags);
 	info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
 	info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
 	info->icount.tx++;
@@ -2997,7 +2599,7 @@
 		/* We must enable since it is disabled in ser_interrupt */
 		e100_enable_serial_tx_ready_irq(info);
 	}
-	restore_flags(flags);
+	local_irq_restore(flags);
 
 	if (CIRC_CNT(info->xmit.head,
 		     info->xmit.tail,
@@ -3022,7 +2624,7 @@
 	int handled = 0;
 	static volatile unsigned long reentered_ready_mask = 0;
 
-	save_flags(flags); cli();
+	local_irq_save(flags);
 	irq_mask1_rd = *R_IRQ_MASK1_RD;
 	/* First handle all rx interrupts with ints disabled */
 	info = rs_table;
@@ -3067,7 +2669,7 @@
 			/* Unblock the serial interrupt */
 			*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
 
-			sti();
+			local_irq_enable();
 			ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
 			info = rs_table;
 			for (i = 0; i < NR_PORTS; i++) {
@@ -3080,11 +2682,11 @@
 				ready_mask <<= 2;
 			}
 			/* handle_ser_tx_interrupt enables tr_ready interrupts */
-			cli();
+			local_irq_disable();
 			/* Handle reentered TX interrupt */
 			irq_mask1_rd = reentered_ready_mask;
 		}
-		cli();
+		local_irq_disable();
 		tx_started = 0;
 	} else {
 		unsigned long ready_mask;
@@ -3100,7 +2702,7 @@
 		}
 	}
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 	return IRQ_RETVAL(handled);
 } /* ser_interrupt */
 #endif
@@ -3121,11 +2723,13 @@
  * them using rs_sched_event(), and they get done here.
  */
 static void
-do_softint(void *private_)
+do_softint(struct work_struct *work)
 {
-	struct e100_serial	*info = (struct e100_serial *) private_;
+	struct e100_serial	*info;
 	struct tty_struct	*tty;
 
+	info = container_of(work, struct e100_serial, work);
+
 	tty = info->tty;
 	if (!tty)
 		return;
@@ -3145,13 +2749,12 @@
 	if (!xmit_page)
 		return -ENOMEM;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 
 	/* if it was already initialized, skip this */
 
 	if (info->flags & ASYNC_INITIALIZED) {
-		restore_flags(flags);
+		local_irq_restore(flags);
 		free_page(xmit_page);
 		return 0;
 	}
@@ -3277,7 +2880,7 @@
 
 	info->flags |= ASYNC_INITIALIZED;
 
-	restore_flags(flags);
+	local_irq_restore(flags);
 	return 0;
 }
 
@@ -3328,8 +2931,7 @@
 	       info->irq);
 #endif
 
-	save_flags(flags);
-	cli(); /* Disable interrupts */
+	local_irq_save(flags);
 
 	if (info->xmit.buf) {
 		free_page((unsigned long)info->xmit.buf);
@@ -3353,7 +2955,7 @@
 		set_bit(TTY_IO_ERROR, &info->tty->flags);
 
 	info->flags &= ~ASYNC_INITIALIZED;
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 
@@ -3411,7 +3013,6 @@
 				DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
 				info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
 			}
-		}
 #endif
 		else
 		{
@@ -3445,8 +3046,7 @@
 
 #ifndef CONFIG_SVINTO_SIM
 	/* start with default settings and then fill in changes */
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	/* 8 bit, no/even parity */
 	info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
 			   IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
@@ -3510,7 +3110,7 @@
 	}
 
 	*((unsigned long *)&info->port[REG_XOFF]) = xoff;
-	restore_flags(flags);
+	local_irq_restore(flags);
 #endif /* !CONFIG_SVINTO_SIM */
 
 	update_char_time(info);
@@ -3538,13 +3138,12 @@
 
 	/* this protection might not exactly be necessary here */
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	start_transmit(info);
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
-static int rs_raw_write(struct tty_struct * tty, int from_user,
+static int rs_raw_write(struct tty_struct *tty,
 			const unsigned char *buf, int count)
 {
 	int	c, ret = 0;
@@ -3567,53 +3166,19 @@
 	SIMCOUT(buf, count);
 	return count;
 #endif
-	save_flags(flags);
+	local_save_flags(flags);
 	DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
 	DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
 
 
-	/* the cli/restore_flags pairs below are needed because the
-	 * DMA interrupt handler moves the info->xmit values. the memcpy
-	 * needs to be in the critical region unfortunately, because we
-	 * need to read xmit values, memcpy, write xmit values in one
-	 * atomic operation... this could perhaps be avoided by more clever
-	 * design.
+	/* The local_irq_disable/restore_flags pairs below are needed
+	 * because the DMA interrupt handler moves the info->xmit values.
+	 * the memcpy needs to be in the critical region unfortunately,
+	 * because we need to read xmit values, memcpy, write xmit values
+	 * in one atomic operation... this could perhaps be avoided by
+	 * more clever design.
 	 */
-	if (from_user) {
-		mutex_lock(&tmp_buf_mutex);
-		while (1) {
-			int c1;
-			c = CIRC_SPACE_TO_END(info->xmit.head,
-					      info->xmit.tail,
-					      SERIAL_XMIT_SIZE);
-			if (count < c)
-				c = count;
-			if (c <= 0)
-				break;
-
-			c -= copy_from_user(tmp_buf, buf, c);
-			if (!c) {
-				if (!ret)
-					ret = -EFAULT;
-				break;
-			}
-			cli();
-			c1 = CIRC_SPACE_TO_END(info->xmit.head,
-					       info->xmit.tail,
-					       SERIAL_XMIT_SIZE);
-			if (c1 < c)
-				c = c1;
-			memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
-			info->xmit.head = ((info->xmit.head + c) &
-					   (SERIAL_XMIT_SIZE-1));
-			restore_flags(flags);
-			buf += c;
-			count -= c;
-			ret += c;
-		}
-		mutex_unlock(&tmp_buf_mutex);
-	} else {
-		cli();
+	local_irq_disable();
 		while (count) {
 			c = CIRC_SPACE_TO_END(info->xmit.head,
 					      info->xmit.tail,
@@ -3631,8 +3196,7 @@
 			count -= c;
 			ret += c;
 		}
-		restore_flags(flags);
-	}
+	local_irq_restore(flags);
 
 	/* enable transmitter if not running, unless the tty is stopped
 	 * this does not need IRQ protection since if tr_running == 0
@@ -3651,7 +3215,7 @@
 } /* raw_raw_write() */
 
 static int
-rs_write(struct tty_struct * tty, int from_user,
+rs_write(struct tty_struct *tty,
 	 const unsigned char *buf, int count)
 {
 #if defined(CONFIG_ETRAX_RS485)
@@ -3678,7 +3242,7 @@
 	}
 #endif /* CONFIG_ETRAX_RS485 */
 
-	count = rs_raw_write(tty, from_user, buf, count);
+	count = rs_raw_write(tty, buf, count);
 
 #if defined(CONFIG_ETRAX_RS485)
 	if (info->rs485.enabled)
@@ -3746,10 +3310,9 @@
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	info->xmit.head = info->xmit.tail = 0;
-	restore_flags(flags);
+	local_irq_restore(flags);
 
 	tty_wakeup(tty);
 }
@@ -3767,7 +3330,7 @@
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
-	save_flags(flags); cli();
+	local_irq_save(flags);
 	if (info->uses_dma_out) {
 		/* Put the DMA on hold and disable the channel */
 		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
@@ -3784,7 +3347,7 @@
 	DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
 	info->x_char = ch;
 	e100_enable_serial_tx_ready_irq(info);
-	restore_flags(flags);
+	local_irq_restore(flags);
 }
 
 /*
@@ -3996,21 +3559,61 @@
 }
 #endif
 
-static int
-get_modem_info(struct e100_serial * info, unsigned int *value)
+static void
+rs_break(struct tty_struct *tty, int break_state)
 {
-	unsigned int result;
-	/* Polarity isn't verified */
-#if 0 /*def SERIAL_DEBUG_IO  */
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
 
-	printk("get_modem_info: RTS: %i DTR: %i CD: %i RI: %i DSR: %i CTS: %i\n",
-	       E100_RTS_GET(info),
-	       E100_DTR_GET(info),
-	       E100_CD_GET(info),
-	       E100_RI_GET(info),
-	       E100_DSR_GET(info),
-	       E100_CTS_GET(info));
-#endif
+	if (!info->port)
+		return;
+
+	local_irq_save(flags);
+	if (break_state == -1) {
+		/* Go to manual mode and set the txd pin to 0 */
+		/* Clear bit 7 (txd) and 6 (tr_enable) */
+		info->tx_ctrl &= 0x3F;
+	} else {
+		/* Set bit 7 (txd) and 6 (tr_enable) */
+		info->tx_ctrl |= (0x80 | 0x40);
+	}
+	info->port[REG_TR_CTRL] = info->tx_ctrl;
+	local_irq_restore(flags);
+}
+
+static int
+rs_tiocmset(struct tty_struct *tty, struct file *file,
+		unsigned int set, unsigned int clear)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+	if (clear & TIOCM_RTS)
+		e100_rts(info, 0);
+	if (clear & TIOCM_DTR)
+		e100_dtr(info, 0);
+	/* Handle FEMALE behaviour */
+	if (clear & TIOCM_RI)
+		e100_ri_out(info, 0);
+	if (clear & TIOCM_CD)
+		e100_cd_out(info, 0);
+
+	if (set & TIOCM_RTS)
+		e100_rts(info, 1);
+	if (set & TIOCM_DTR)
+		e100_dtr(info, 1);
+	/* Handle FEMALE behaviour */
+	if (set & TIOCM_RI)
+		e100_ri_out(info, 1);
+	if (set & TIOCM_CD)
+		e100_cd_out(info, 1);
+	return 0;
+}
+
+static int
+rs_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned int result;
 
 	result =
 		(!E100_RTS_GET(info) ? TIOCM_RTS : 0)
@@ -4021,96 +3624,21 @@
 		| (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
 
 #ifdef SERIAL_DEBUG_IO
-	printk("e100ser: modem state: %i 0x%08X\n", result, result);
+	printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n",
+		info->line, result, result);
 	{
 		char s[100];
 
 		get_control_state_str(result, s);
-		printk("state: %s\n", s);
+		printk(KERN_DEBUG "state: %s\n", s);
 	}
 #endif
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
+	return result;
+
 }
 
 
 static int
-set_modem_info(struct e100_serial * info, unsigned int cmd,
-	       unsigned int *value)
-{
-	unsigned int arg;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS) {
-			e100_rts(info, 1);
-		}
-		if (arg & TIOCM_DTR) {
-			e100_dtr(info, 1);
-		}
-		/* Handle FEMALE behaviour */
-		if (arg & TIOCM_RI) {
-			e100_ri_out(info, 1);
-		}
-		if (arg & TIOCM_CD) {
-			e100_cd_out(info, 1);
-		}
-		break;
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS) {
-			e100_rts(info, 0);
-		}
-		if (arg & TIOCM_DTR) {
-			e100_dtr(info, 0);
-		}
-		/* Handle FEMALE behaviour */
-		if (arg & TIOCM_RI) {
-			e100_ri_out(info, 0);
-		}
-		if (arg & TIOCM_CD) {
-			e100_cd_out(info, 0);
-		}
-		break;
-	case TIOCMSET:
-		e100_rts(info, arg & TIOCM_RTS);
-		e100_dtr(info, arg & TIOCM_DTR);
-		/* Handle FEMALE behaviour */
-		e100_ri_out(info, arg & TIOCM_RI);
-		e100_cd_out(info, arg & TIOCM_CD);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-
-static void
-rs_break(struct tty_struct *tty, int break_state)
-{
-	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-	unsigned long flags;
-
-	if (!info->port)
-		return;
-
-	save_flags(flags);
-	cli();
-	if (break_state == -1) {
-		/* Go to manual mode and set the txd pin to 0 */
-		info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */
-	} else {
-		info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */
-	}
-	info->port[REG_TR_CTRL] = info->tx_ctrl;
-	restore_flags(flags);
-}
-
-static int
 rs_ioctl(struct tty_struct *tty, struct file * file,
 	 unsigned int cmd, unsigned long arg)
 {
@@ -4124,49 +3652,45 @@
 	}
 
 	switch (cmd) {
-		case TIOCMGET:
-			return get_modem_info(info, (unsigned int *) arg);
-		case TIOCMBIS:
-		case TIOCMBIC:
-		case TIOCMSET:
-			return set_modem_info(info, cmd, (unsigned int *) arg);
-		case TIOCGSERIAL:
-			return get_serial_info(info,
-					       (struct serial_struct *) arg);
-		case TIOCSSERIAL:
-			return set_serial_info(info,
-					       (struct serial_struct *) arg);
-		case TIOCSERGETLSR: /* Get line status register */
-			return get_lsr_info(info, (unsigned int *) arg);
+	case TIOCGSERIAL:
+		return get_serial_info(info,
+				       (struct serial_struct *) arg);
+	case TIOCSSERIAL:
+		return set_serial_info(info,
+				       (struct serial_struct *) arg);
+	case TIOCSERGETLSR: /* Get line status register */
+		return get_lsr_info(info, (unsigned int *) arg);
 
-		case TIOCSERGSTRUCT:
-			if (copy_to_user((struct e100_serial *) arg,
-					 info, sizeof(struct e100_serial)))
-				return -EFAULT;
-			return 0;
+	case TIOCSERGSTRUCT:
+		if (copy_to_user((struct e100_serial *) arg,
+				 info, sizeof(struct e100_serial)))
+			return -EFAULT;
+		return 0;
 
 #if defined(CONFIG_ETRAX_RS485)
-		case TIOCSERSETRS485:
-		{
-			struct rs485_control rs485ctrl;
-			if (copy_from_user(&rs485ctrl, (struct rs485_control*)arg, sizeof(rs485ctrl)))
-				return -EFAULT;
+	case TIOCSERSETRS485:
+	{
+		struct rs485_control rs485ctrl;
+		if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
+				sizeof(rs485ctrl)))
+			return -EFAULT;
 
-			return e100_enable_rs485(tty, &rs485ctrl);
-		}
+		return e100_enable_rs485(tty, &rs485ctrl);
+	}
 
-		case TIOCSERWRRS485:
-		{
-			struct rs485_write rs485wr;
-			if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr)))
-				return -EFAULT;
+	case TIOCSERWRRS485:
+	{
+		struct rs485_write rs485wr;
+		if (copy_from_user(&rs485wr, (struct rs485_write *)arg,
+				sizeof(rs485wr)))
+			return -EFAULT;
 
-			return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size);
-		}
+		return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size);
+	}
 #endif
 
-		default:
-			return -ENOIOCTLCMD;
+	default:
+		return -ENOIOCTLCMD;
 	}
 	return 0;
 }
@@ -4191,46 +3715,6 @@
 
 }
 
-/* In debugport.c - register a console write function that uses the normal
- * serial driver
- */
-typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
-
-extern debugport_write_function debug_write_function;
-
-static int rs_debug_write_function(int i, const char *buf, unsigned int len)
-{
-	int cnt;
-	int written = 0;
-        struct tty_struct *tty;
-        static int recurse_cnt = 0;
-
-        tty = rs_table[i].tty;
-        if (tty)  {
-		unsigned long flags;
-		if (recurse_cnt > 5) /* We skip this debug output */
-			return 1;
-
-		local_irq_save(flags);
-		recurse_cnt++;
-		local_irq_restore(flags);
-                do {
-                        cnt = rs_write(tty, 0, buf + written, len);
-                        if (cnt >= 0) {
-				written += cnt;
-                                buf += cnt;
-                                len -= cnt;
-                        } else
-                                len = cnt;
-                } while(len > 0);
-		local_irq_save(flags);
-		recurse_cnt--;
-		local_irq_restore(flags);
-                return 1;
-        }
-        return 0;
-}
-
 /*
  * ------------------------------------------------------------
  * rs_close()
@@ -4252,11 +3736,10 @@
 
 	/* interrupts are disabled for this entire function */
 
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 
 	if (tty_hung_up_p(filp)) {
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 
@@ -4283,7 +3766,7 @@
 		info->count = 0;
 	}
 	if (info->count) {
-		restore_flags(flags);
+		local_irq_restore(flags);
 		return;
 	}
 	info->flags |= ASYNC_CLOSING;
@@ -4337,7 +3820,7 @@
 	}
 	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
-	restore_flags(flags);
+	local_irq_restore(flags);
 
 	/* port closed */
 
@@ -4359,6 +3842,28 @@
 #endif
 	}
 #endif
+
+	/*
+	 * Release any allocated DMA irq's.
+	 */
+	if (info->dma_in_enabled) {
+		free_irq(info->dma_in_irq_nbr, info);
+		cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
+		info->uses_dma_in = 0;
+#ifdef SERIAL_DEBUG_OPEN
+		printk(KERN_DEBUG "DMA irq '%s' freed\n",
+			info->dma_in_irq_description);
+#endif
+	}
+	if (info->dma_out_enabled) {
+		free_irq(info->dma_out_irq_nbr, info);
+		cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
+		info->uses_dma_out = 0;
+#ifdef SERIAL_DEBUG_OPEN
+		printk(KERN_DEBUG "DMA irq '%s' freed\n",
+			info->dma_out_irq_description);
+#endif
+	}
 }
 
 /*
@@ -4433,8 +3938,8 @@
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
+		wait_event_interruptible(info->close_wait,
+			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		if (info->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
@@ -4472,21 +3977,19 @@
 	printk("block_til_ready before block: ttyS%d, count = %d\n",
 	       info->line, info->count);
 #endif
-	save_flags(flags);
-	cli();
+	local_irq_save(flags);
 	if (!tty_hung_up_p(filp)) {
 		extra_count++;
 		info->count--;
 	}
-	restore_flags(flags);
+	local_irq_restore(flags);
 	info->blocked_open++;
 	while (1) {
-		save_flags(flags);
-		cli();
+		local_irq_save(flags);
 		/* assert RTS and DTR */
 		e100_rts(info, 1);
 		e100_dtr(info, 1);
-		restore_flags(flags);
+		local_irq_restore(flags);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
 		    !(info->flags & ASYNC_INITIALIZED)) {
@@ -4528,6 +4031,19 @@
 	return 0;
 }
 
+static void
+deinit_port(struct e100_serial *info)
+{
+	if (info->dma_out_enabled) {
+		cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
+		free_irq(info->dma_out_irq_nbr, info);
+	}
+	if (info->dma_in_enabled) {
+		cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
+		free_irq(info->dma_in_irq_nbr, info);
+	}
+}
+
 /*
  * This routine is called whenever a serial port is opened.
  * It performs the serial-specific initialization for the tty structure.
@@ -4538,9 +4054,9 @@
 	struct e100_serial	*info;
 	int 			retval, line;
 	unsigned long           page;
+	int                     allocated_resources = 0;
 
 	/* find which port we want to open */
-
 	line = tty->index;
 
 	if (line < 0 || line >= NR_PORTS)
@@ -4580,8 +4096,8 @@
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
+		wait_event_interruptible(info->close_wait,
+			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
@@ -4591,12 +4107,85 @@
 	}
 
 	/*
+	 * If DMA is enabled try to allocate the irq's.
+	 */
+	if (info->count == 1) {
+		allocated_resources = 1;
+		if (info->dma_in_enabled) {
+			if (request_irq(info->dma_in_irq_nbr,
+					rec_interrupt,
+					info->dma_in_irq_flags,
+					info->dma_in_irq_description,
+					info)) {
+				printk(KERN_WARNING "DMA irq '%s' busy; "
+					"falling back to non-DMA mode\n",
+					info->dma_in_irq_description);
+				/* Make sure we never try to use DMA in */
+				/* for the port again. */
+				info->dma_in_enabled = 0;
+			} else if (cris_request_dma(info->dma_in_nbr,
+					info->dma_in_irq_description,
+					DMA_VERBOSE_ON_ERROR,
+					info->dma_owner)) {
+				free_irq(info->dma_in_irq_nbr, info);
+				printk(KERN_WARNING "DMA '%s' busy; "
+					"falling back to non-DMA mode\n",
+					info->dma_in_irq_description);
+				/* Make sure we never try to use DMA in */
+				/* for the port again. */
+				info->dma_in_enabled = 0;
+			}
+#ifdef SERIAL_DEBUG_OPEN
+			else
+				printk(KERN_DEBUG "DMA irq '%s' allocated\n",
+					info->dma_in_irq_description);
+#endif
+		}
+		if (info->dma_out_enabled) {
+			if (request_irq(info->dma_out_irq_nbr,
+					       tr_interrupt,
+					       info->dma_out_irq_flags,
+					       info->dma_out_irq_description,
+					       info)) {
+				printk(KERN_WARNING "DMA irq '%s' busy; "
+					"falling back to non-DMA mode\n",
+					info->dma_out_irq_description);
+				/* Make sure we never try to use DMA out */
+				/* for the port again. */
+				info->dma_out_enabled = 0;
+			} else if (cris_request_dma(info->dma_out_nbr,
+					     info->dma_out_irq_description,
+					     DMA_VERBOSE_ON_ERROR,
+					     info->dma_owner)) {
+				free_irq(info->dma_out_irq_nbr, info);
+				printk(KERN_WARNING "DMA '%s' busy; "
+					"falling back to non-DMA mode\n",
+					info->dma_out_irq_description);
+				/* Make sure we never try to use DMA out */
+				/* for the port again. */
+				info->dma_out_enabled = 0;
+			}
+#ifdef SERIAL_DEBUG_OPEN
+			else
+				printk(KERN_DEBUG "DMA irq '%s' allocated\n",
+					info->dma_out_irq_description);
+#endif
+		}
+	}
+
+	/*
 	 * Start up the serial port
 	 */
 
 	retval = startup(info);
-	if (retval)
+	if (retval) {
+		if (allocated_resources)
+			deinit_port(info);
+
+		/* FIXME Decrease count info->count here too? */
 		return retval;
+	}
+
 
 	retval = block_til_ready(tty, filp, info);
 	if (retval) {
@@ -4604,6 +4193,9 @@
 		printk("rs_open returning after block_til_ready with %d\n",
 		       retval);
 #endif
+		if (allocated_resources)
+			deinit_port(info);
+
 		return retval;
 	}
 
@@ -4793,6 +4385,8 @@
 	.send_xchar = rs_send_xchar,
 	.wait_until_sent = rs_wait_until_sent,
 	.read_proc = rs_read_proc,
+	.tiocmget = rs_tiocmget,
+	.tiocmset = rs_tiocmset
 };
 
 static int __init
@@ -4810,9 +4404,27 @@
 	/* Setup the timed flush handler system */
 
 #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
-	init_timer(&flush_timer);
-	flush_timer.function = timed_flush_handler;
-	mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+	setup_timer(&flush_timer, timed_flush_handler, 0);
+	mod_timer(&flush_timer, jiffies + 5);
+#endif
+
+#if defined(CONFIG_ETRAX_RS485)
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+	if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+			rs485_pa_bit)) {
+		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
+			"RS485 pin\n");
+		return -EBUSY;
+	}
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+	if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+			rs485_port_g_bit)) {
+		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
+			"RS485 pin\n");
+		return -EBUSY;
+	}
+#endif
 #endif
 
 	/* Initialize the tty_driver structure */
@@ -4839,6 +4451,16 @@
 	/* do some initializing for the separate ports */
 
 	for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
+		if (info->enabled) {
+			if (cris_request_io_interface(info->io_if,
+					info->io_if_description)) {
+				printk(KERN_CRIT "ETRAX100LX async serial: "
+					"Could not allocate IO pins for "
+					"%s, port %d\n",
+					info->io_if_description, i);
+				info->enabled = 0;
+			}
+		}
 		info->uses_dma_in = 0;
 		info->uses_dma_out = 0;
 		info->line = i;
@@ -4872,7 +4494,7 @@
 		info->rs485.delay_rts_before_send = 0;
 		info->rs485.enabled = 0;
 #endif
-		INIT_WORK(&info->work, do_softint, info);
+		INIT_WORK(&info->work, do_softint);
 
 		if (info->enabled) {
 			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
@@ -4890,64 +4512,17 @@
 #endif
 
 #ifndef CONFIG_SVINTO_SIM
+#ifndef CONFIG_ETRAX_KGDB
 	/* Not needed in simulator.  May only complicate stuff. */
 	/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
 
-	if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
-		panic("irq8");
+	if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
+			IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
+		panic("%s: Failed to request irq8", __FUNCTION__);
 
-#ifdef CONFIG_ETRAX_SERIAL_PORT0
-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-	if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
-		panic("irq22");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-	if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
-		panic("irq23");
-#endif
-#endif
-
-#ifdef CONFIG_ETRAX_SERIAL_PORT1
-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-	if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
-		panic("irq24");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-	if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
-		panic("irq25");
-#endif
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT2
-	/* DMA Shared with par0 (and SCSI0 and ATA) */
-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-	if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
-		panic("irq18");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-	if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
-		panic("irq19");
-#endif
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT3
-	/* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-	if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
-		panic("irq20");
-#endif
-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-	if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
-		panic("irq21");
-#endif
-#endif
-
-#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
-	if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
-		       "fast serial dma timeout", NULL)) {
-		printk(KERN_CRIT "err: timer1 irq\n");
-	}
 #endif
 #endif /* CONFIG_SVINTO_SIM */
-	debug_write_function = rs_debug_write_function;
+
 	return 0;
 }
 
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
new file mode 100644
index 0000000..ccd0f32
--- /dev/null
+++ b/drivers/serial/crisv10.h
@@ -0,0 +1,146 @@
+/*
+ * serial.h: Arch-dep definitions for the Etrax100 serial driver.
+ *
+ * Copyright (C) 1998-2007 Axis Communications AB
+ */
+
+#ifndef _ETRAX_SERIAL_H
+#define _ETRAX_SERIAL_H
+
+#include <linux/circ_buf.h>
+#include <asm/termios.h>
+#include <asm/dma.h>
+#include <asm/arch/io_interface_mux.h>
+
+/* Software state per channel */
+
+#ifdef __KERNEL__
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#define SERIAL_RECV_DESCRIPTORS 8
+
+struct etrax_recv_buffer {
+	struct etrax_recv_buffer *next;
+	unsigned short length;
+	unsigned char error;
+	unsigned char pad;
+
+	unsigned char buffer[0];
+};
+
+struct e100_serial {
+	int baud;
+	volatile u8	*port;	/* R_SERIALx_CTRL */
+	u32		irq;	/* bitnr in R_IRQ_MASK2 for dmaX_descr */
+
+	/* Output registers */
+	volatile u8 *oclrintradr;	/* adr to R_DMA_CHx_CLR_INTR */
+	volatile u32 *ofirstadr;	/* adr to R_DMA_CHx_FIRST */
+	volatile u8 *ocmdadr;		/* adr to R_DMA_CHx_CMD */
+	const volatile u8 *ostatusadr;	/* adr to R_DMA_CHx_STATUS */
+
+	/* Input registers */
+	volatile u8 *iclrintradr;	/* adr to R_DMA_CHx_CLR_INTR */
+	volatile u32 *ifirstadr;	/* adr to R_DMA_CHx_FIRST */
+	volatile u8 *icmdadr;		/* adr to R_DMA_CHx_CMD */
+	volatile u32 *idescradr;	/* adr to R_DMA_CHx_DESCR */
+
+	int flags;	/* defined in tty.h */
+
+	u8 rx_ctrl;	/* shadow for R_SERIALx_REC_CTRL */
+	u8 tx_ctrl;	/* shadow for R_SERIALx_TR_CTRL */
+	u8 iseteop;	/* bit number for R_SET_EOP for the input dma */
+	int enabled;	/* Set to 1 if the port is enabled in HW config */
+
+	u8 dma_out_enabled;	/* Set to 1 if DMA should be used */
+	u8 dma_in_enabled;	/* Set to 1 if DMA should be used */
+
+	/* end of fields defined in rs_table[] in .c-file */
+	int		dma_owner;
+	unsigned int	dma_in_nbr;
+	unsigned int	dma_out_nbr;
+	unsigned int	dma_in_irq_nbr;
+	unsigned int	dma_out_irq_nbr;
+	unsigned long	dma_in_irq_flags;
+	unsigned long	dma_out_irq_flags;
+	char		*dma_in_irq_description;
+	char		*dma_out_irq_description;
+
+	enum cris_io_interface io_if;
+	char            *io_if_description;
+
+	u8		uses_dma_in;  /* Set to 1 if DMA is used */
+	u8		uses_dma_out; /* Set to 1 if DMA is used */
+	u8		forced_eop;   /* a fifo eop has been forced */
+	int			baud_base;     /* For special baudrates */
+	int			custom_divisor; /* For special baudrates */
+	struct etrax_dma_descr	tr_descr;
+	struct etrax_dma_descr	rec_descr[SERIAL_RECV_DESCRIPTORS];
+	int			cur_rec_descr;
+
+	volatile int		tr_running; /* 1 if output is running */
+
+	struct tty_struct	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			x_char;	/* xon/xoff character */
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned short		closing_wait2;
+	unsigned long		event;
+	unsigned long		last_active;
+	int			line;
+	int			type;  /* PORT_ETRAX */
+	int			count;	    /* # of fd on device */
+	int			blocked_open; /* # of blocked opens */
+	struct circ_buf		xmit;
+	struct etrax_recv_buffer *first_recv_buffer;
+	struct etrax_recv_buffer *last_recv_buffer;
+	unsigned int		recv_cnt;
+	unsigned int		max_recv_cnt;
+
+	struct work_struct	work;
+	struct async_icount	icount;   /* error-statistics etc.*/
+	struct ktermios		normal_termios;
+	struct ktermios		callout_termios;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+
+	unsigned long char_time_usec;       /* The time for 1 char, in usecs */
+	unsigned long flush_time_usec;      /* How often we should flush */
+	unsigned long last_tx_active_usec;  /* Last tx usec in the jiffies */
+	unsigned long last_tx_active;       /* Last tx time in jiffies */
+	unsigned long last_rx_active_usec;  /* Last rx usec in the jiffies */
+	unsigned long last_rx_active;       /* Last rx time in jiffies */
+
+	int break_detected_cnt;
+	int errorcode;
+
+#ifdef CONFIG_ETRAX_RS485
+	struct rs485_control	rs485;  /* RS-485 support */
+#endif
+};
+
+/* this PORT is not in the standard serial.h. it's not actually used for
+ * anything since we only have one type of async serial-port anyway in this
+ * system.
+ */
+
+#define PORT_ETRAX 1
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP	0
+
+#endif /* __KERNEL__ */
+
+#endif /* !_ETRAX_SERIAL_H */
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index e89ae29..d24621c 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -77,7 +77,6 @@
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
-# define SCI_NPORTS 2
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
@@ -102,12 +101,6 @@
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define SCSPTR1 0xffe00020 /* 16 bit SCIF */
-# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001   /* overrun error bit */
-# define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 # include <asm/hardware.h>
 # define SCIF_BASE_ADDR    0x01030000
@@ -116,8 +109,7 @@
 # define SCIF_LSR2_OFFS    0x0000024
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
-# define SCSCR_INIT(port)  0x38                           /* TIE=0,RIE=0,
-							     TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port)  0x38		/* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
@@ -577,15 +569,6 @@
 		return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-static inline int sci_rxd_in(struct uart_port *port)
-{
-	if (port->mapbase == 0xffe00000)
-		return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */
-	else
-		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-
-}
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index dfef83f..a85f2d3 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -329,12 +329,14 @@
 static void ulite_console_wait_tx(struct uart_port *port)
 {
 	int i;
+	u8 val;
 
-	/* wait up to 10ms for the character(s) to be sent */
-	for (i = 0; i < 10000; i++) {
-		if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
+	/* Spin waiting for TX fifo to have space available */
+	for (i = 0; i < 100000; i++) {
+		val = readb(port->membase + ULITE_STATUS);
+		if ((val & ULITE_STATUS_TXFULL) == 0)
 			break;
-		udelay(1);
+		cpu_relax();
 	}
 }
 
diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c
index 7d873b3..4d0282b 100644
--- a/drivers/sh/superhyway/superhyway.c
+++ b/drivers/sh/superhyway/superhyway.c
@@ -107,16 +107,17 @@
 static int __init superhyway_init(void)
 {
 	struct superhyway_bus *bus;
-	int ret = 0;
+	int ret;
 
-	device_register(&superhyway_bus_device);
+	ret = device_register(&superhyway_bus_device);
+	if (unlikely(ret))
+		return ret;
 
 	for (bus = superhyway_channels; bus->ops; bus++)
 		ret |= superhyway_scan_bus(bus);
 
 	return ret;
 }
-
 postcore_initcall(superhyway_init);
 
 static const struct superhyway_device_id *
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 89769ce..b31f443 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -457,10 +457,11 @@
 EXPORT_SYMBOL_GPL(spi_register_master);
 
 
-static int __unregister(struct device *dev, void *unused)
+static int __unregister(struct device *dev, void *master_dev)
 {
 	/* note: before about 2.6.14-rc1 this would corrupt memory: */
-	spi_unregister_device(to_spi_device(dev));
+	if (dev != master_dev)
+		spi_unregister_device(to_spi_device(dev));
 	return 0;
 }
 
@@ -478,7 +479,8 @@
 {
 	int dummy;
 
-	dummy = device_for_each_child(master->dev.parent, NULL, __unregister);
+	dummy = device_for_each_child(master->dev.parent, &master->dev,
+					__unregister);
 	device_unregister(&master->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_master);
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index cc5094f..363ac8e 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -24,6 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 #include <asm/gpio.h>
 
 
@@ -74,7 +75,6 @@
 	struct list_head queue;
 	wait_queue_head_t waitq;
 	void __iomem *membase;
-	int irq;
 	int baseclk;
 	struct clk *clk;
 	u32 max_speed_hz, min_speed_hz;
@@ -350,12 +350,12 @@
 	struct resource *res;
 	int ret = -ENODEV;
 	u32 mcr;
+	int irq;
 
 	master = spi_alloc_master(&dev->dev, sizeof(*c));
 	if (!master)
 		return ret;
 	c = spi_master_get_devdata(master);
-	c->irq = -1;
 	platform_set_drvdata(dev, master);
 
 	INIT_WORK(&c->work, txx9spi_work);
@@ -381,32 +381,36 @@
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res)
-		goto exit;
-	c->membase = ioremap(res->start, res->end - res->start + 1);
+		goto exit_busy;
+	if (!devm_request_mem_region(&dev->dev,
+				     res->start, res->end - res->start + 1,
+				     "spi_txx9"))
+		goto exit_busy;
+	c->membase = devm_ioremap(&dev->dev,
+				  res->start, res->end - res->start + 1);
 	if (!c->membase)
-		goto exit;
+		goto exit_busy;
 
 	/* enter config mode */
 	mcr = txx9spi_rd(c, TXx9_SPMCR);
 	mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
 	txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
 
-	c->irq = platform_get_irq(dev, 0);
-	if (c->irq < 0)
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		goto exit_busy;
+	ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
+			       "spi_txx9", c);
+	if (ret)
 		goto exit;
-	ret = request_irq(c->irq, txx9spi_interrupt, 0, dev->name, c);
-	if (ret) {
-		c->irq = -1;
-		goto exit;
-	}
 
 	c->workqueue = create_singlethread_workqueue(master->dev.parent->bus_id);
 	if (!c->workqueue)
-		goto exit;
+		goto exit_busy;
 	c->last_chipselect = -1;
 
 	dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
-		 (unsigned long long)res->start, c->irq,
+		 (unsigned long long)res->start, irq,
 		 (c->baseclk + 500000) / 1000000);
 
 	master->bus_num = dev->id;
@@ -418,13 +422,11 @@
 	if (ret)
 		goto exit;
 	return 0;
+exit_busy:
+	ret = -EBUSY;
 exit:
 	if (c->workqueue)
 		destroy_workqueue(c->workqueue);
-	if (c->irq >= 0)
-		free_irq(c->irq, c);
-	if (c->membase)
-		iounmap(c->membase);
 	if (c->clk) {
 		clk_disable(c->clk);
 		clk_put(c->clk);
@@ -442,8 +444,6 @@
 	spi_unregister_master(master);
 	platform_set_drvdata(dev, NULL);
 	destroy_workqueue(c->workqueue);
-	free_irq(c->irq, c);
-	iounmap(c->membase);
 	clk_disable(c->clk);
 	clk_put(c->clk);
 	spi_master_put(master);
diff --git a/drivers/spi/tle62x0.c b/drivers/spi/tle62x0.c
index 6da58ca..455991f 100644
--- a/drivers/spi/tle62x0.c
+++ b/drivers/spi/tle62x0.c
@@ -107,8 +107,11 @@
 
 	mutex_lock(&st->lock);
 	ret = tle62x0_read(st);
-
 	dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
+	if (ret < 0) {
+		mutex_unlock(&st->lock);
+		return ret;
+	}
 
 	for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
 		fault <<= 8;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index c12a741..85a2054 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -440,6 +440,7 @@
 			break;
 		case SSB_BUSTYPE_PCMCIA:
 #ifdef CONFIG_SSB_PCMCIAHOST
+			sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
 			dev->parent = &bus->host_pcmcia->dev;
 #endif
 			break;
@@ -1147,7 +1148,10 @@
 
 	return err;
 }
-subsys_initcall(ssb_modinit);
+/* ssb must be initialized after PCI but before the ssb drivers.
+ * That means we must use some initcall between subsys_initcall
+ * and device_initcall. */
+fs_initcall(ssb_modinit);
 
 static void __exit ssb_modexit(void)
 {
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index b6abee8..bb44a76 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -63,17 +63,17 @@
 		err = pcmcia_access_configuration_register(pdev, &reg);
 		if (err != CS_SUCCESS)
 			goto error;
-		read_addr |= (reg.Value & 0xF) << 12;
+		read_addr |= ((u32)(reg.Value & 0x0F)) << 12;
 		reg.Offset = 0x30;
 		err = pcmcia_access_configuration_register(pdev, &reg);
 		if (err != CS_SUCCESS)
 			goto error;
-		read_addr |= reg.Value << 16;
+		read_addr |= ((u32)reg.Value) << 16;
 		reg.Offset = 0x32;
 		err = pcmcia_access_configuration_register(pdev, &reg);
 		if (err != CS_SUCCESS)
 			goto error;
-		read_addr |= reg.Value << 24;
+		read_addr |= ((u32)reg.Value) << 24;
 
 		cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE;
 		if (cur_core == coreidx)
@@ -152,28 +152,29 @@
 	goto out_unlock;
 }
 
-/* These are the main device register access functions.
- * do_select_core is inline to have the likely hotpath inline.
- * All unlikely codepaths are out-of-line. */
-static inline int do_select_core(struct ssb_bus *bus,
-				 struct ssb_device *dev,
-				 u16 *offset)
+static int select_core_and_segment(struct ssb_device *dev,
+				   u16 *offset)
 {
+	struct ssb_bus *bus = dev->bus;
 	int err;
-	u8 need_seg = (*offset >= 0x800) ? 1 : 0;
+	u8 need_segment;
+
+	if (*offset >= 0x800) {
+		*offset -= 0x800;
+		need_segment = 1;
+	} else
+		need_segment = 0;
 
 	if (unlikely(dev != bus->mapped_device)) {
 		err = ssb_pcmcia_switch_core(bus, dev);
 		if (unlikely(err))
 			return err;
 	}
-	if (unlikely(need_seg != bus->mapped_pcmcia_seg)) {
-		err = ssb_pcmcia_switch_segment(bus, need_seg);
+	if (unlikely(need_segment != bus->mapped_pcmcia_seg)) {
+		err = ssb_pcmcia_switch_segment(bus, need_segment);
 		if (unlikely(err))
 			return err;
 	}
-	if (need_seg == 1)
-		*offset -= 0x800;
 
 	return 0;
 }
@@ -181,32 +182,31 @@
 static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
 {
 	struct ssb_bus *bus = dev->bus;
-	u16 x;
 
-	if (unlikely(do_select_core(bus, dev, &offset)))
+	if (unlikely(select_core_and_segment(dev, &offset)))
 		return 0xFFFF;
-	x = readw(bus->mmio + offset);
 
-	return x;
+	return readw(bus->mmio + offset);
 }
 
 static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset)
 {
 	struct ssb_bus *bus = dev->bus;
-	u32 x;
+	u32 lo, hi;
 
-	if (unlikely(do_select_core(bus, dev, &offset)))
+	if (unlikely(select_core_and_segment(dev, &offset)))
 		return 0xFFFFFFFF;
-	x = readl(bus->mmio + offset);
+	lo = readw(bus->mmio + offset);
+	hi = readw(bus->mmio + offset + 2);
 
-	return x;
+	return (lo | (hi << 16));
 }
 
 static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
 {
 	struct ssb_bus *bus = dev->bus;
 
-	if (unlikely(do_select_core(bus, dev, &offset)))
+	if (unlikely(select_core_and_segment(dev, &offset)))
 		return;
 	writew(value, bus->mmio + offset);
 }
@@ -215,12 +215,12 @@
 {
 	struct ssb_bus *bus = dev->bus;
 
-	if (unlikely(do_select_core(bus, dev, &offset)))
+	if (unlikely(select_core_and_segment(dev, &offset)))
 		return;
-	readw(bus->mmio + offset);
-	writew(value >> 16, bus->mmio + offset + 2);
-	readw(bus->mmio + offset);
-	writew(value, bus->mmio + offset);
+	writeb((value & 0xFF000000) >> 24, bus->mmio + offset + 3);
+	writeb((value & 0x00FF0000) >> 16, bus->mmio + offset + 2);
+	writeb((value & 0x0000FF00) >> 8, bus->mmio + offset + 1);
+	writeb((value & 0x000000FF) >> 0, bus->mmio + offset + 0);
 }
 
 /* Not "static", as it's used in main.c */
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index 4d8c2a5..bcea8d9 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -120,9 +120,8 @@
 void phone_unregister_device(struct phone_device *pfd)
 {
 	mutex_lock(&phone_lock);
-	if (phone_device[pfd->minor] != pfd)
-		panic("phone: bad unregister");
-	phone_device[pfd->minor] = NULL;
+	if (likely(phone_device[pfd->minor] == pfd))
+		phone_device[pfd->minor] = NULL;
 	mutex_unlock(&phone_lock);
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 6bfdba6..1f7ab15 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1215,20 +1215,18 @@
 
 static int keyspan_open (struct usb_serial_port *port, struct file *filp)
 {
-	struct keyspan_port_private 	*p_priv;
-	struct keyspan_serial_private 	*s_priv;
-	struct usb_serial 		*serial = port->serial;
+	struct keyspan_port_private	*p_priv;
+	struct keyspan_serial_private	*s_priv;
+	struct usb_serial		*serial = port->serial;
 	const struct keyspan_device_details	*d_details;
 	int				i, err;
-	int				baud_rate, device_port;
 	struct urb			*urb;
-	unsigned int			cflag;
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
-	
-	dbg("%s - port%d.", __FUNCTION__, port->number); 
+
+	dbg("%s - port%d.", __FUNCTION__, port->number);
 
 	/* Set some sane defaults */
 	p_priv->rts_state = 1;
@@ -1249,7 +1247,7 @@
 		urb->dev = serial->dev;
 
 		/* make sure endpoint data toggle is synchronized with the device */
-		
+
 		usb_clear_halt(urb->dev, urb->pipe);
 
 		if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
@@ -1265,30 +1263,6 @@
 		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
 	}
 
-	/* get the terminal config for the setup message now so we don't 
-	 * need to send 2 of them */
-
-	cflag = port->tty->termios->c_cflag;
-	device_port = port->number - port->serial->minor;
-
-	/* Baud rate calculation takes baud rate as an integer
-	   so other rates can be generated if desired. */
-	baud_rate = tty_get_baud_rate(port->tty);
-	/* If no match or invalid, leave as default */		
-	if (baud_rate >= 0
-	    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
-				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
-		p_priv->baud = baud_rate;
-	}
-
-	/* set CTS/RTS handshake etc. */
-	p_priv->cflag = cflag;
-	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
-
-	keyspan_send_setup(port, 1);
-	//mdelay(100);
-	//keyspan_set_termios(port, NULL);
-
 	return (0);
 }
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index cc4b60f..7d86e9e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -503,7 +503,7 @@
 
 config FB_CT65550
 	bool "Chips 65550 display support"
-	depends on (FB = y) && PPC32
+	depends on (FB = y) && PPC32 && PCI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 5fb8675..d0e4cb6 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -874,6 +874,8 @@
 		default:
 			BUG();
 		}
+		break;
+
 	case 24:/* TRUECOLOUR, 16m */
 		hw.co_pixfmt		= CO_PIXFMT_24BPP;
 		hw.width		*= 3;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index b9b572b..2e552d5 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -183,8 +183,8 @@
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-struct fb_videomode *default_mode = &default_mode_CRT;
-struct fb_var_screeninfo *default_var = &default_var_CRT;
+struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index 6c227f9..ca13c48 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -33,7 +33,7 @@
 
 #define MSR_LX_GLD_CONFIG    0x48002001
 #define MSR_LX_GLCP_DOTPLL   0x4c000015
-#define MSR_LX_DF_PADSEL     0x48000011
+#define MSR_LX_DF_PADSEL     0x48002011
 #define MSR_LX_DC_SPARE      0x80000011
 #define MSR_LX_DF_GLCONFIG   0x48002001
 
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index b3463dd..75836aa 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -727,7 +727,7 @@
 
 static int ps3fb_get_vblank(struct fb_vblank *vblank)
 {
-	memset(vblank, 0, sizeof(&vblank));
+	memset(vblank, 0, sizeof(*vblank));
 	vblank->flags = FB_VBLANK_HAVE_VSYNC;
 	return 0;
 }
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index a5333c1..b829dc7 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -540,7 +540,7 @@
 	int ret = 0;
 	u8 revision;
 
-	dbg("probe called: device is %p\n", dev);
+	dbg("probe called: device is %p\n", pdev);
 
 	printk(KERN_INFO "Epson S1D13XXX FB Driver\n");
 
@@ -753,8 +753,11 @@
 static int __init
 s1d13xxxfb_init(void)
 {
+
+#ifndef MODULE
 	if (fb_get_options("s1d13xxxfb", NULL))
 		return -ENODEV;
+#endif
 
 	return platform_driver_register(&s1d13xxxfb_driver);
 }
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index bc7d236..37bd24b 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1248,7 +1248,6 @@
 	if(found_mode) {
 		ivideo->sisfb_mode_idx = sisfb_validate_mode(ivideo,
 				ivideo->sisfb_mode_idx, ivideo->currentvbflags);
-		ivideo->mode_no = sisbios_mode[ivideo->sisfb_mode_idx].mode_no[ivideo->mni];
 	} else {
 		ivideo->sisfb_mode_idx = -1;
 	}
@@ -1260,6 +1259,8 @@
 		return -EINVAL;
 	}
 
+	ivideo->mode_no = sisbios_mode[ivideo->sisfb_mode_idx].mode_no[ivideo->mni];
+
 	if(sisfb_search_refresh_rate(ivideo, ivideo->refresh_rate, ivideo->sisfb_mode_idx) == 0) {
 		ivideo->rate_idx = sisbios_mode[ivideo->sisfb_mode_idx].rate_idx;
 		ivideo->refresh_rate = 60;
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index b983d26..d1d6c0f 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -926,8 +926,10 @@
 		int start, struct fb_info *info)
 {
 	struct uvesafb_ktask *task;
+#ifdef CONFIG_X86
 	struct uvesafb_par *par = info->par;
 	int i = par->mode_idx;
+#endif
 	int err = 0;
 
 	/*
@@ -1103,11 +1105,11 @@
 
 static int uvesafb_blank(int blank, struct fb_info *info)
 {
-	struct uvesafb_par *par = info->par;
 	struct uvesafb_ktask *task;
 	int err = 1;
-
 #ifdef CONFIG_X86
+	struct uvesafb_par *par = info->par;
+
 	if (par->vbe_ib.capabilities & VBE_CAP_VGACOMPAT) {
 		int loop = 10000;
 		u8 seq = 0, crtc17 = 0;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 0e4baca..1dc04b6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -53,7 +53,7 @@
 	unsigned int num_added;
 
 	/* Last used index we've seen. */
-	unsigned int last_used_idx;
+	u16 last_used_idx;
 
 	/* How to notify other side. FIXME: commonalize hcalls! */
 	void (*notify)(struct virtqueue *vq);
@@ -277,11 +277,17 @@
 	struct vring_virtqueue *vq;
 	unsigned int i;
 
+	/* We assume num is a power of 2. */
+	if (num & (num - 1)) {
+		dev_warn(&vdev->dev, "Bad virtqueue length %u\n", num);
+		return NULL;
+	}
+
 	vq = kmalloc(sizeof(*vq) + sizeof(void *)*num, GFP_KERNEL);
 	if (!vq)
 		return NULL;
 
-	vring_init(&vq->vring, num, pages);
+	vring_init(&vq->vring, num, pages, PAGE_SIZE);
 	vq->vq.callback = callback;
 	vq->vq.vdev = vdev;
 	vq->vq.vq_ops = &vring_vq_ops;
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 299e274..b63b5e0 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -233,7 +233,7 @@
 {
 	int count, err;
 
-	memset(st, 0, sizeof(st));
+	memset(st, 0, sizeof(*st));
 
 	count = 0;
 	err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 756f7e9..fbb12da 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -82,7 +82,7 @@
 
 static void v9fs_parse_options(struct v9fs_session_info *v9ses)
 {
-	char *options = v9ses->options;
+	char *options;
 	substring_t args[MAX_OPT_ARGS];
 	char *p;
 	int option;
@@ -96,9 +96,10 @@
 	v9ses->cache = 0;
 	v9ses->trans = v9fs_default_trans();
 
-	if (!options)
+	if (!v9ses->options)
 		return;
 
+	options = kstrdup(v9ses->options, GFP_KERNEL);
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
 		if (!*p)
@@ -169,6 +170,7 @@
 			continue;
 		}
 	}
+	kfree(options);
 }
 
 /**
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index bb0cef9..678c02f 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -119,6 +119,7 @@
 
 	P9_DPRINTK(P9_DEBUG_VFS, " \n");
 
+	st = NULL;
 	v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL);
 	if (!v9ses)
 		return -ENOMEM;
@@ -164,10 +165,12 @@
 	root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
 	v9fs_stat2inode(st, root->d_inode, sb);
 	v9fs_fid_add(root, fid);
+	kfree(st);
 
 	return simple_set_mnt(mnt, sb);
 
 error:
+	kfree(st);
 	if (fid)
 		p9_client_clunk(fid);
 
diff --git a/fs/Kconfig b/fs/Kconfig
index c75c954..429a002 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -2007,7 +2007,7 @@
 config CIFS_UPCALL
 	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
 	  depends on CIFS_EXPERIMENTAL
-	  depends on CONNECTOR
+	  depends on KEYS
 	  help
 	    Enables an upcall mechanism for CIFS which will be used to contact
 	    userspace helper utilities to provide SPNEGO packaged Kerberos
diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c
index 7b4bbe4..849fc31 100644
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -382,7 +382,7 @@
 	       cell->name, key_serial(key),
 	       (int) namesz, (int) namesz, name, namesz);
 
-	if (namesz > sizeof(vl->vldb.name)) {
+	if (namesz >= sizeof(vl->vldb.name)) {
 		_leave(" = -ENAMETOOLONG");
 		return ERR_PTR(-ENAMETOOLONG);
 	}
diff --git a/fs/bfs/bfs.h b/fs/bfs/bfs.h
index 130f6c6..ac7a8b1 100644
--- a/fs/bfs/bfs.h
+++ b/fs/bfs/bfs.h
@@ -14,8 +14,6 @@
 	unsigned long si_blocks;
 	unsigned long si_freeb;
 	unsigned long si_freei;
-	unsigned long si_lf_ioff;
-	unsigned long si_lf_sblk;
 	unsigned long si_lf_eblk;
 	unsigned long si_lasti;
 	unsigned long * si_imap;
@@ -39,7 +37,7 @@
 
 static inline struct bfs_inode_info *BFS_I(struct inode *inode)
 {
-	return list_entry(inode, struct bfs_inode_info, vfs_inode);
+	return container_of(inode, struct bfs_inode_info, vfs_inode);
 }
 
 
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 097f149..1fd056d 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -21,29 +21,32 @@
 #define dprintf(x...)
 #endif
 
-static int bfs_add_entry(struct inode * dir, const unsigned char * name, int namelen, int ino);
-static struct buffer_head * bfs_find_entry(struct inode * dir, 
-	const unsigned char * name, int namelen, struct bfs_dirent ** res_dir);
+static int bfs_add_entry(struct inode *dir, const unsigned char *name,
+						int namelen, int ino);
+static struct buffer_head *bfs_find_entry(struct inode *dir,
+				const unsigned char *name, int namelen,
+				struct bfs_dirent **res_dir);
 
-static int bfs_readdir(struct file * f, void * dirent, filldir_t filldir)
+static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 {
-	struct inode * dir = f->f_path.dentry->d_inode;
-	struct buffer_head * bh;
-	struct bfs_dirent * de;
+	struct inode *dir = f->f_path.dentry->d_inode;
+	struct buffer_head *bh;
+	struct bfs_dirent *de;
 	unsigned int offset;
 	int block;
 
 	lock_kernel();
 
-	if (f->f_pos & (BFS_DIRENT_SIZE-1)) {
-		printf("Bad f_pos=%08lx for %s:%08lx\n", (unsigned long)f->f_pos, 
-			dir->i_sb->s_id, dir->i_ino);
+	if (f->f_pos & (BFS_DIRENT_SIZE - 1)) {
+		printf("Bad f_pos=%08lx for %s:%08lx\n",
+					(unsigned long)f->f_pos,
+					dir->i_sb->s_id, dir->i_ino);
 		unlock_kernel();
 		return -EBADF;
 	}
 
 	while (f->f_pos < dir->i_size) {
-		offset = f->f_pos & (BFS_BSIZE-1);
+		offset = f->f_pos & (BFS_BSIZE - 1);
 		block = BFS_I(dir)->i_sblock + (f->f_pos >> BFS_BSIZE_BITS);
 		bh = sb_bread(dir->i_sb, block);
 		if (!bh) {
@@ -54,7 +57,9 @@
 			de = (struct bfs_dirent *)(bh->b_data + offset);
 			if (de->ino) {
 				int size = strnlen(de->name, BFS_NAMELEN);
-				if (filldir(dirent, de->name, size, f->f_pos, le16_to_cpu(de->ino), DT_UNKNOWN) < 0) {
+				if (filldir(dirent, de->name, size, f->f_pos,
+						le16_to_cpu(de->ino),
+						DT_UNKNOWN) < 0) {
 					brelse(bh);
 					unlock_kernel();
 					return 0;
@@ -62,7 +67,7 @@
 			}
 			offset += BFS_DIRENT_SIZE;
 			f->f_pos += BFS_DIRENT_SIZE;
-		} while (offset < BFS_BSIZE && f->f_pos < dir->i_size);
+		} while ((offset < BFS_BSIZE) && (f->f_pos < dir->i_size));
 		brelse(bh);
 	}
 
@@ -78,13 +83,13 @@
 
 extern void dump_imap(const char *, struct super_block *);
 
-static int bfs_create(struct inode * dir, struct dentry * dentry, int mode,
-		struct nameidata *nd)
+static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
+						struct nameidata *nd)
 {
 	int err;
-	struct inode * inode;
-	struct super_block * s = dir->i_sb;
-	struct bfs_sb_info * info = BFS_SB(s);
+	struct inode *inode;
+	struct super_block *s = dir->i_sb;
+	struct bfs_sb_info *info = BFS_SB(s);
 	unsigned long ino;
 
 	inode = new_inode(s);
@@ -97,7 +102,7 @@
 		iput(inode);
 		return -ENOSPC;
 	}
-	set_bit(ino, info->si_imap);	
+	set_bit(ino, info->si_imap);
 	info->si_freei--;
 	inode->i_uid = current->fsuid;
 	inode->i_gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
@@ -113,9 +118,10 @@
 	BFS_I(inode)->i_eblock = 0;
 	insert_inode_hash(inode);
         mark_inode_dirty(inode);
-	dump_imap("create",s);
+	dump_imap("create", s);
 
-	err = bfs_add_entry(dir, dentry->d_name.name, dentry->d_name.len, inode->i_ino);
+	err = bfs_add_entry(dir, dentry->d_name.name, dentry->d_name.len,
+							inode->i_ino);
 	if (err) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -127,11 +133,12 @@
 	return 0;
 }
 
-static struct dentry * bfs_lookup(struct inode * dir, struct dentry * dentry, struct nameidata *nd)
+static struct dentry *bfs_lookup(struct inode *dir, struct dentry *dentry,
+						struct nameidata *nd)
 {
-	struct inode * inode = NULL;
-	struct buffer_head * bh;
-	struct bfs_dirent * de;
+	struct inode *inode = NULL;
+	struct buffer_head *bh;
+	struct bfs_dirent *de;
 
 	if (dentry->d_name.len > BFS_NAMELEN)
 		return ERR_PTR(-ENAMETOOLONG);
@@ -152,13 +159,15 @@
 	return NULL;
 }
 
-static int bfs_link(struct dentry * old, struct inode * dir, struct dentry * new)
+static int bfs_link(struct dentry *old, struct inode *dir,
+						struct dentry *new)
 {
-	struct inode * inode = old->d_inode;
+	struct inode *inode = old->d_inode;
 	int err;
 
 	lock_kernel();
-	err = bfs_add_entry(dir, new->d_name.name, new->d_name.len, inode->i_ino);
+	err = bfs_add_entry(dir, new->d_name.name, new->d_name.len,
+							inode->i_ino);
 	if (err) {
 		unlock_kernel();
 		return err;
@@ -172,23 +181,23 @@
 	return 0;
 }
 
-
-static int bfs_unlink(struct inode * dir, struct dentry * dentry)
+static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 {
 	int error = -ENOENT;
-	struct inode * inode;
-	struct buffer_head * bh;
-	struct bfs_dirent * de;
+	struct inode *inode;
+	struct buffer_head *bh;
+	struct bfs_dirent *de;
 
 	inode = dentry->d_inode;
 	lock_kernel();
 	bh = bfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len, &de);
-	if (!bh || le16_to_cpu(de->ino) != inode->i_ino)
+	if (!bh || (le16_to_cpu(de->ino) != inode->i_ino))
 		goto out_brelse;
 
 	if (!inode->i_nlink) {
-		printf("unlinking non-existent file %s:%lu (nlink=%d)\n", inode->i_sb->s_id, 
-				inode->i_ino, inode->i_nlink);
+		printf("unlinking non-existent file %s:%lu (nlink=%d)\n",
+					inode->i_sb->s_id, inode->i_ino,
+					inode->i_nlink);
 		inode->i_nlink = 1;
 	}
 	de->ino = 0;
@@ -205,12 +214,12 @@
 	return error;
 }
 
-static int bfs_rename(struct inode * old_dir, struct dentry * old_dentry, 
-			struct inode * new_dir, struct dentry * new_dentry)
+static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
+			struct inode *new_dir, struct dentry *new_dentry)
 {
-	struct inode * old_inode, * new_inode;
-	struct buffer_head * old_bh, * new_bh;
-	struct bfs_dirent * old_de, * new_de;		
+	struct inode *old_inode, *new_inode;
+	struct buffer_head *old_bh, *new_bh;
+	struct bfs_dirent *old_de, *new_de;
 	int error = -ENOENT;
 
 	old_bh = new_bh = NULL;
@@ -223,7 +232,7 @@
 				old_dentry->d_name.name, 
 				old_dentry->d_name.len, &old_de);
 
-	if (!old_bh || le16_to_cpu(old_de->ino) != old_inode->i_ino)
+	if (!old_bh || (le16_to_cpu(old_de->ino) != old_inode->i_ino))
 		goto end_rename;
 
 	error = -EPERM;
@@ -239,7 +248,8 @@
 	if (!new_bh) {
 		error = bfs_add_entry(new_dir, 
 					new_dentry->d_name.name,
-			 		new_dentry->d_name.len, old_inode->i_ino);
+					new_dentry->d_name.len,
+					old_inode->i_ino);
 		if (error)
 			goto end_rename;
 	}
@@ -268,11 +278,12 @@
 	.rename			= bfs_rename,
 };
 
-static int bfs_add_entry(struct inode * dir, const unsigned char * name, int namelen, int ino)
+static int bfs_add_entry(struct inode *dir, const unsigned char *name,
+							int namelen, int ino)
 {
-	struct buffer_head * bh;
-	struct bfs_dirent * de;
-	int block, sblock, eblock, off, eoff;
+	struct buffer_head *bh;
+	struct bfs_dirent *de;
+	int block, sblock, eblock, off, pos;
 	int i;
 
 	dprintf("name=%s, namelen=%d\n", name, namelen);
@@ -284,27 +295,24 @@
 
 	sblock = BFS_I(dir)->i_sblock;
 	eblock = BFS_I(dir)->i_eblock;
-	eoff = dir->i_size % BFS_BSIZE;
-	for (block=sblock; block<=eblock; block++) {
+	for (block = sblock; block <= eblock; block++) {
 		bh = sb_bread(dir->i_sb, block);
-		if(!bh) 
+		if (!bh)
 			return -ENOSPC;
-		for (off=0; off<BFS_BSIZE; off+=BFS_DIRENT_SIZE) {
+		for (off = 0; off < BFS_BSIZE; off += BFS_DIRENT_SIZE) {
 			de = (struct bfs_dirent *)(bh->b_data + off);
-			if (block==eblock && off>=eoff) {
-				/* Do not read/interpret the garbage in the end of eblock. */
-				de->ino = 0;
-			}
 			if (!de->ino) {
-				if ((block-sblock)*BFS_BSIZE + off >= dir->i_size) {
+				pos = (block - sblock) * BFS_BSIZE + off;
+				if (pos >= dir->i_size) {
 					dir->i_size += BFS_DIRENT_SIZE;
 					dir->i_ctime = CURRENT_TIME_SEC;
 				}
 				dir->i_mtime = CURRENT_TIME_SEC;
 				mark_inode_dirty(dir);
 				de->ino = cpu_to_le16((u16)ino);
-				for (i=0; i<BFS_NAMELEN; i++)
-					de->name[i] = (i < namelen) ? name[i] : 0;
+				for (i = 0; i < BFS_NAMELEN; i++)
+					de->name[i] =
+						(i < namelen) ? name[i] : 0;
 				mark_buffer_dirty(bh);
 				brelse(bh);
 				return 0;
@@ -315,25 +323,26 @@
 	return -ENOSPC;
 }
 
-static inline int bfs_namecmp(int len, const unsigned char * name, const char * buffer)
+static inline int bfs_namecmp(int len, const unsigned char *name,
+							const char *buffer)
 {
-	if (len < BFS_NAMELEN && buffer[len])
+	if ((len < BFS_NAMELEN) && buffer[len])
 		return 0;
 	return !memcmp(name, buffer, len);
 }
 
-static struct buffer_head * bfs_find_entry(struct inode * dir, 
-	const unsigned char * name, int namelen, struct bfs_dirent ** res_dir)
+static struct buffer_head *bfs_find_entry(struct inode *dir,
+			const unsigned char *name, int namelen,
+			struct bfs_dirent **res_dir)
 {
-	unsigned long block, offset;
-	struct buffer_head * bh;
-	struct bfs_dirent * de;
+	unsigned long block = 0, offset = 0;
+	struct buffer_head *bh = NULL;
+	struct bfs_dirent *de;
 
 	*res_dir = NULL;
 	if (namelen > BFS_NAMELEN)
 		return NULL;
-	bh = NULL;
-	block = offset = 0;
+
 	while (block * BFS_BSIZE + offset < dir->i_size) {
 		if (!bh) {
 			bh = sb_bread(dir->i_sb, BFS_I(dir)->i_sblock + block);
@@ -344,7 +353,8 @@
 		}
 		de = (struct bfs_dirent *)(bh->b_data + offset);
 		offset += BFS_DIRENT_SIZE;
-		if (le16_to_cpu(de->ino) && bfs_namecmp(namelen, name, de->name)) {
+		if (le16_to_cpu(de->ino) &&
+				bfs_namecmp(namelen, name, de->name)) {
 			*res_dir = de;
 			return bh;
 		}
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 911b4cc..b11e63e 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -2,6 +2,11 @@
  *	fs/bfs/file.c
  *	BFS file operations.
  *	Copyright (C) 1999,2000 Tigran Aivazian <tigran@veritas.com>
+ *
+ *	Make the file block allocation algorithm understand the size
+ *	of the underlying block device.
+ *	Copyright (C) 2007 Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
+ *
  */
 
 #include <linux/fs.h>
@@ -27,7 +32,8 @@
 	.splice_read	= generic_file_splice_read,
 };
 
-static int bfs_move_block(unsigned long from, unsigned long to, struct super_block *sb)
+static int bfs_move_block(unsigned long from, unsigned long to,
+					struct super_block *sb)
 {
 	struct buffer_head *bh, *new;
 
@@ -43,21 +49,22 @@
 }
 
 static int bfs_move_blocks(struct super_block *sb, unsigned long start,
-                           unsigned long end, unsigned long where)
+				unsigned long end, unsigned long where)
 {
 	unsigned long i;
 
 	dprintf("%08lx-%08lx->%08lx\n", start, end, where);
 	for (i = start; i <= end; i++)
 		if(bfs_move_block(i, where + i, sb)) {
-			dprintf("failed to move block %08lx -> %08lx\n", i, where + i);
+			dprintf("failed to move block %08lx -> %08lx\n", i,
+								where + i);
 			return -EIO;
 		}
 	return 0;
 }
 
-static int bfs_get_block(struct inode * inode, sector_t block, 
-	struct buffer_head * bh_result, int create)
+static int bfs_get_block(struct inode *inode, sector_t block,
+			struct buffer_head *bh_result, int create)
 {
 	unsigned long phys;
 	int err;
@@ -66,9 +73,6 @@
 	struct bfs_inode_info *bi = BFS_I(inode);
 	struct buffer_head *sbh = info->si_sbh;
 
-	if (block > info->si_blocks)
-		return -EIO;
-
 	phys = bi->i_sblock + block;
 	if (!create) {
 		if (phys <= bi->i_eblock) {
@@ -79,21 +83,29 @@
 		return 0;
 	}
 
-	/* if the file is not empty and the requested block is within the range
-	   of blocks allocated for this file, we can grant it */
-	if (inode->i_size && phys <= bi->i_eblock) {
+	/*
+	 * If the file is not empty and the requested block is within the
+	 * range of blocks allocated for this file, we can grant it.
+	 */
+	if (bi->i_sblock && (phys <= bi->i_eblock)) {
 		dprintf("c=%d, b=%08lx, phys=%08lx (interim block granted)\n", 
 				create, (unsigned long)block, phys);
 		map_bh(bh_result, sb, phys);
 		return 0;
 	}
 
-	/* the rest has to be protected against itself */
+	/* The file will be extended, so let's see if there is enough space. */
+	if (phys >= info->si_blocks)
+		return -ENOSPC;
+
+	/* The rest has to be protected against itself. */
 	lock_kernel();
 
-	/* if the last data block for this file is the last allocated
-	   block, we can extend the file trivially, without moving it
-	   anywhere */
+	/*
+	 * If the last data block for this file is the last allocated
+	 * block, we can extend the file trivially, without moving it
+	 * anywhere.
+	 */
 	if (bi->i_eblock == info->si_lf_eblk) {
 		dprintf("c=%d, b=%08lx, phys=%08lx (simple extension)\n", 
 				create, (unsigned long)block, phys);
@@ -106,13 +118,19 @@
 		goto out;
 	}
 
-	/* Ok, we have to move this entire file to the next free block */
+	/* Ok, we have to move this entire file to the next free block. */
 	phys = info->si_lf_eblk + 1;
-	if (bi->i_sblock) { /* if data starts on block 0 then there is no data */
+	if (phys + block >= info->si_blocks) {
+		err = -ENOSPC;
+		goto out;
+	}
+
+	if (bi->i_sblock) {
 		err = bfs_move_blocks(inode->i_sb, bi->i_sblock, 
-				bi->i_eblock, phys);
+						bi->i_eblock, phys);
 		if (err) {
-			dprintf("failed to move ino=%08lx -> fs corruption\n", inode->i_ino);
+			dprintf("failed to move ino=%08lx -> fs corruption\n",
+								inode->i_ino);
 			goto out;
 		}
 	} else
@@ -124,8 +142,10 @@
 	phys += block;
 	info->si_lf_eblk = bi->i_eblock = phys;
 
-	/* this assumes nothing can write the inode back while we are here
-	 * and thus update inode->i_blocks! (XXX)*/
+	/*
+	 * This assumes nothing can write the inode back while we are here
+	 * and thus update inode->i_blocks! (XXX)
+	 */
 	info->si_freeb -= bi->i_eblock - bi->i_sblock + 1 - inode->i_blocks;
 	mark_inode_dirty(inode);
 	mark_buffer_dirty(sbh);
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 7bd9c2b..294c41b 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -30,25 +30,26 @@
 #define dprintf(x...)
 #endif
 
-void dump_imap(const char *prefix, struct super_block * s);
+void dump_imap(const char *prefix, struct super_block *s);
 
-static void bfs_read_inode(struct inode * inode)
+static void bfs_read_inode(struct inode *inode)
 {
 	unsigned long ino = inode->i_ino;
-	struct bfs_inode * di;
-	struct buffer_head * bh;
+	struct bfs_inode *di;
+	struct buffer_head *bh;
 	int block, off;
 
-	if (ino < BFS_ROOT_INO || ino > BFS_SB(inode->i_sb)->si_lasti) {
+	if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(inode->i_sb)->si_lasti)) {
 		printf("Bad inode number %s:%08lx\n", inode->i_sb->s_id, ino);
 		make_bad_inode(inode);
 		return;
 	}
 
-	block = (ino - BFS_ROOT_INO)/BFS_INODES_PER_BLOCK + 1;
+	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 	bh = sb_bread(inode->i_sb, block);
 	if (!bh) {
-		printf("Unable to read inode %s:%08lx\n", inode->i_sb->s_id, ino);
+		printf("Unable to read inode %s:%08lx\n", inode->i_sb->s_id,
+									ino);
 		make_bad_inode(inode);
 		return;
 	}
@@ -56,7 +57,7 @@
 	off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
 	di = (struct bfs_inode *)bh->b_data + off;
 
-	inode->i_mode = 0x0000FFFF &  le32_to_cpu(di->i_mode);
+	inode->i_mode = 0x0000FFFF & le32_to_cpu(di->i_mode);
 	if (le32_to_cpu(di->i_vtype) == BFS_VDIR) {
 		inode->i_mode |= S_IFDIR;
 		inode->i_op = &bfs_dir_inops;
@@ -70,48 +71,48 @@
 
 	BFS_I(inode)->i_sblock =  le32_to_cpu(di->i_sblock);
 	BFS_I(inode)->i_eblock =  le32_to_cpu(di->i_eblock);
+	BFS_I(inode)->i_dsk_ino = le16_to_cpu(di->i_ino);
 	inode->i_uid =  le32_to_cpu(di->i_uid);
 	inode->i_gid =  le32_to_cpu(di->i_gid);
 	inode->i_nlink =  le32_to_cpu(di->i_nlink);
 	inode->i_size = BFS_FILESIZE(di);
 	inode->i_blocks = BFS_FILEBLOCKS(di);
-        if (inode->i_size || inode->i_blocks) dprintf("Registered inode with %lld size, %ld blocks\n", inode->i_size, inode->i_blocks);
 	inode->i_atime.tv_sec =  le32_to_cpu(di->i_atime);
 	inode->i_mtime.tv_sec =  le32_to_cpu(di->i_mtime);
 	inode->i_ctime.tv_sec =  le32_to_cpu(di->i_ctime);
 	inode->i_atime.tv_nsec = 0;
 	inode->i_mtime.tv_nsec = 0;
 	inode->i_ctime.tv_nsec = 0;
-	BFS_I(inode)->i_dsk_ino = le16_to_cpu(di->i_ino); /* can be 0 so we store a copy */
 
 	brelse(bh);
 }
 
-static int bfs_write_inode(struct inode * inode, int unused)
+static int bfs_write_inode(struct inode *inode, int unused)
 {
 	unsigned int ino = (u16)inode->i_ino;
         unsigned long i_sblock;
-	struct bfs_inode * di;
-	struct buffer_head * bh;
+	struct bfs_inode *di;
+	struct buffer_head *bh;
 	int block, off;
 
         dprintf("ino=%08x\n", ino);
 
-	if (ino < BFS_ROOT_INO || ino > BFS_SB(inode->i_sb)->si_lasti) {
+	if ((ino < BFS_ROOT_INO) || (ino > BFS_SB(inode->i_sb)->si_lasti)) {
 		printf("Bad inode number %s:%08x\n", inode->i_sb->s_id, ino);
 		return -EIO;
 	}
 
 	lock_kernel();
-	block = (ino - BFS_ROOT_INO)/BFS_INODES_PER_BLOCK + 1;
+	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 	bh = sb_bread(inode->i_sb, block);
 	if (!bh) {
-		printf("Unable to read inode %s:%08x\n", inode->i_sb->s_id, ino);
+		printf("Unable to read inode %s:%08x\n",
+				inode->i_sb->s_id, ino);
 		unlock_kernel();
 		return -EIO;
 	}
 
-	off = (ino - BFS_ROOT_INO)%BFS_INODES_PER_BLOCK;
+	off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
 	di = (struct bfs_inode *)bh->b_data + off;
 
 	if (ino == BFS_ROOT_INO)
@@ -133,27 +134,26 @@
 	di->i_eoffset = cpu_to_le32(i_sblock * BFS_BSIZE + inode->i_size - 1);
 
 	mark_buffer_dirty(bh);
-        dprintf("Written ino=%d into %d:%d\n",le16_to_cpu(di->i_ino),block,off);
 	brelse(bh);
 	unlock_kernel();
 	return 0;
 }
 
-static void bfs_delete_inode(struct inode * inode)
+static void bfs_delete_inode(struct inode *inode)
 {
 	unsigned long ino = inode->i_ino;
-	struct bfs_inode * di;
-	struct buffer_head * bh;
+	struct bfs_inode *di;
+	struct buffer_head *bh;
 	int block, off;
-	struct super_block * s = inode->i_sb;
-	struct bfs_sb_info * info = BFS_SB(s);
-	struct bfs_inode_info * bi = BFS_I(inode);
+	struct super_block *s = inode->i_sb;
+	struct bfs_sb_info *info = BFS_SB(s);
+	struct bfs_inode_info *bi = BFS_I(inode);
 
 	dprintf("ino=%08lx\n", ino);
 
 	truncate_inode_pages(&inode->i_data, 0);
 
-	if (ino < BFS_ROOT_INO || ino > info->si_lasti) {
+	if ((ino < BFS_ROOT_INO) || (ino > info->si_lasti)) {
 		printf("invalid ino=%08lx\n", ino);
 		return;
 	}
@@ -162,31 +162,35 @@
 	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
 	lock_kernel();
 	mark_inode_dirty(inode);
-	block = (ino - BFS_ROOT_INO)/BFS_INODES_PER_BLOCK + 1;
+
+	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 	bh = sb_bread(s, block);
 	if (!bh) {
-		printf("Unable to read inode %s:%08lx\n", inode->i_sb->s_id, ino);
+		printf("Unable to read inode %s:%08lx\n",
+					inode->i_sb->s_id, ino);
 		unlock_kernel();
 		return;
 	}
-	off = (ino - BFS_ROOT_INO)%BFS_INODES_PER_BLOCK;
-	di = (struct bfs_inode *) bh->b_data + off;
+	off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
+	di = (struct bfs_inode *)bh->b_data + off;
+	memset((void *)di, 0, sizeof(struct bfs_inode));
+	mark_buffer_dirty(bh);
+	brelse(bh);
+
         if (bi->i_dsk_ino) {
-		info->si_freeb += 1 + bi->i_eblock - bi->i_sblock;
+		info->si_freeb += BFS_FILEBLOCKS(bi);
 		info->si_freei++;
 		clear_bit(ino, info->si_imap);
 		dump_imap("delete_inode", s);
         }
-	di->i_ino = 0;
-	di->i_sblock = 0;
-	mark_buffer_dirty(bh);
-	brelse(bh);
 
-	/* if this was the last file, make the previous 
-	   block "last files last block" even if there is no real file there,
-	   saves us 1 gap */
-	if (info->si_lf_eblk == BFS_I(inode)->i_eblock) {
-		info->si_lf_eblk = BFS_I(inode)->i_sblock - 1;
+	/*
+	 * If this was the last file, make the previous block
+	 * "last block of the last file" even if there is no
+	 * real file there, saves us 1 gap.
+	 */
+	if (info->si_lf_eblk == bi->i_eblock) {
+		info->si_lf_eblk = bi->i_sblock - 1;
 		mark_buffer_dirty(info->si_sbh);
 	}
 	unlock_kernel();
@@ -228,7 +232,7 @@
 	unlock_kernel();
 }
 
-static struct kmem_cache * bfs_inode_cachep;
+static struct kmem_cache *bfs_inode_cachep;
 
 static struct inode *bfs_alloc_inode(struct super_block *sb)
 {
@@ -279,7 +283,7 @@
 	.statfs		= bfs_statfs,
 };
 
-void dump_imap(const char *prefix, struct super_block * s)
+void dump_imap(const char *prefix, struct super_block *s)
 {
 #ifdef DEBUG
 	int i;
@@ -287,25 +291,26 @@
 
 	if (!tmpbuf)
 		return;
-	for (i=BFS_SB(s)->si_lasti; i>=0; i--) {
-		if (i > PAGE_SIZE-100) break;
+	for (i = BFS_SB(s)->si_lasti; i >= 0; i--) {
+		if (i > PAGE_SIZE - 100) break;
 		if (test_bit(i, BFS_SB(s)->si_imap))
 			strcat(tmpbuf, "1");
 		else
 			strcat(tmpbuf, "0");
 	}
-	printk(KERN_ERR "BFS-fs: %s: lasti=%08lx <%s>\n", prefix, BFS_SB(s)->si_lasti, tmpbuf);
+	printf("BFS-fs: %s: lasti=%08lx <%s>\n",
+				prefix, BFS_SB(s)->si_lasti, tmpbuf);
 	free_page((unsigned long)tmpbuf);
 #endif
 }
 
 static int bfs_fill_super(struct super_block *s, void *data, int silent)
 {
-	struct buffer_head * bh;
-	struct bfs_super_block * bfs_sb;
-	struct inode * inode;
+	struct buffer_head *bh;
+	struct bfs_super_block *bfs_sb;
+	struct inode *inode;
 	unsigned i, imap_len;
-	struct bfs_sb_info * info;
+	struct bfs_sb_info *info;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -329,14 +334,14 @@
 
 	s->s_magic = BFS_MAGIC;
 	info->si_sbh = bh;
-	info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE)/sizeof(struct bfs_inode)
-			+ BFS_ROOT_INO - 1;
-
-	imap_len = info->si_lasti/8 + 1;
+	info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) /
+					sizeof(struct bfs_inode)
+					+ BFS_ROOT_INO - 1;
+	imap_len = (info->si_lasti / 8) + 1;
 	info->si_imap = kzalloc(imap_len, GFP_KERNEL);
 	if (!info->si_imap)
 		goto out;
-	for (i=0; i<BFS_ROOT_INO; i++) 
+	for (i = 0; i < BFS_ROOT_INO; i++)
 		set_bit(i, info->si_imap);
 
 	s->s_op = &bfs_sops;
@@ -352,16 +357,15 @@
 		goto out;
 	}
 
-	info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1)>>BFS_BSIZE_BITS; /* for statfs(2) */
-	info->si_freeb = (le32_to_cpu(bfs_sb->s_end) + 1 -  le32_to_cpu(bfs_sb->s_start))>>BFS_BSIZE_BITS;
+	info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS;
+	info->si_freeb = (le32_to_cpu(bfs_sb->s_end) + 1
+			- le32_to_cpu(bfs_sb->s_start)) >> BFS_BSIZE_BITS;
 	info->si_freei = 0;
 	info->si_lf_eblk = 0;
-	info->si_lf_sblk = 0;
-	info->si_lf_ioff = 0;
 	bh = NULL;
-	for (i=BFS_ROOT_INO; i<=info->si_lasti; i++) {
+	for (i = BFS_ROOT_INO; i <= info->si_lasti; i++) {
 		struct bfs_inode *di;
-		int block = (i - BFS_ROOT_INO)/BFS_INODES_PER_BLOCK + 1;
+		int block = (i - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 		int off = (i - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
 		unsigned long sblock, eblock;
 
@@ -384,11 +388,8 @@
 
 		sblock =  le32_to_cpu(di->i_sblock);
 		eblock =  le32_to_cpu(di->i_eblock);
-		if (eblock > info->si_lf_eblk) {
+		if (eblock > info->si_lf_eblk)
 			info->si_lf_eblk = eblock;
-			info->si_lf_sblk = sblock;
-			info->si_lf_ioff = BFS_INO2OFF(i);
-		}
 	}
 	brelse(bh);
 	if (!(s->s_flags & MS_RDONLY)) {
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 3d41916..64dd222 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,7 @@
+Version 1.52
+------------
+Fix oops on second mount to server when null auth is used.
+
 Version 1.51
 ------------
 Fix memory leak in statfs when mounted to very old servers (e.g.
@@ -12,7 +16,12 @@
 cifs_request_buffers pool. Fix problem with POSIX Open/Mkdir on
 bigendian architectures. Fix possible memory corruption when
 EAGAIN returned on kern_recvmsg. Return better error if server
-requires packet signing but client has disabled it.
+requires packet signing but client has disabled it. When mounted
+with cifsacl mount option - mode bits are approximated based
+on the contents of the ACL of the file or directory. When cifs
+mount helper is missing convert make sure that UNC name 
+has backslash (not forward slash) between ip address of server
+and the share name.
 
 Version 1.50
 ------------
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index ff6ba8d..45e42fb 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -3,4 +3,9 @@
 #
 obj-$(CONFIG_CIFS) += cifs.o
 
-cifs-objs := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o fcntl.o readdir.o ioctl.o sess.o export.o cifsacl.o
+cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
+	  link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
+	  md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o fcntl.o \
+	  readdir.o ioctl.o sess.o export.o cifsacl.o
+
+cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 2a01f3e..bcda2c6 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -77,8 +77,12 @@
 
 #define SPNEGO_OID_LEN 7
 #define NTLMSSP_OID_LEN  10
+#define KRB5_OID_LEN  7
+#define MSKRB5_OID_LEN  7
 static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
 static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
+static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
 
 /*
  * ASN.1 context.
@@ -457,6 +461,7 @@
 	unsigned long *oid = NULL;
 	unsigned int cls, con, tag, oidlen, rc;
 	int use_ntlmssp = FALSE;
+	int use_kerberos = FALSE;
 
 	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
 
@@ -545,18 +550,28 @@
 				return 0;
 			}
 			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
-				rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
-				if (rc) {
+				if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) {
+
 					cFYI(1,
 					  ("OID len = %d oid = 0x%lx 0x%lx "
 					   "0x%lx 0x%lx",
 					   oidlen, *oid, *(oid + 1),
 					   *(oid + 2), *(oid + 3)));
-					rc = compare_oid(oid, oidlen,
-						 NTLMSSP_OID, NTLMSSP_OID_LEN);
-					kfree(oid);
-					if (rc)
+
+					if (compare_oid(oid, oidlen,
+							MSKRB5_OID,
+							MSKRB5_OID_LEN))
+						use_kerberos = TRUE;
+					else if (compare_oid(oid, oidlen,
+							     KRB5_OID,
+							     KRB5_OID_LEN))
+						use_kerberos = TRUE;
+					else if (compare_oid(oid, oidlen,
+							     NTLMSSP_OID,
+							     NTLMSSP_OID_LEN))
 						use_ntlmssp = TRUE;
+
+					kfree(oid);
 				}
 			} else {
 				cFYI(1, ("Should be an oid what is going on?"));
@@ -609,12 +624,10 @@
 			 ctx.pointer));	/* is this UTF-8 or ASCII? */
 	}
 
-	/* if (use_kerberos)
-	   *secType = Kerberos
-	   else */
-	if (use_ntlmssp) {
+	if (use_kerberos)
+		*secType = Kerberos;
+	else if (use_ntlmssp)
 		*secType = NTLMSSP;
-	}
 
 	return 1;
 }
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
new file mode 100644
index 0000000..ad54a3a
--- /dev/null
+++ b/fs/cifs/cifs_spnego.c
@@ -0,0 +1,128 @@
+/*
+ *   fs/cifs/cifs_spnego.c -- SPNEGO upcall management for CIFS
+ *
+ *   Copyright (c) 2007 Red Hat, Inc.
+ *   Author(s): Jeff Layton (jlayton@redhat.com)
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/list.h>
+#include <linux/string.h>
+#include <keys/user-type.h>
+#include <linux/key-type.h>
+#include "cifsglob.h"
+#include "cifs_spnego.h"
+#include "cifs_debug.h"
+
+/* create a new cifs key */
+static int
+cifs_spnego_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+	char *payload;
+	int ret;
+
+	ret = -ENOMEM;
+	payload = kmalloc(datalen, GFP_KERNEL);
+	if (!payload)
+		goto error;
+
+	/* attach the data */
+	memcpy(payload, data, datalen);
+	rcu_assign_pointer(key->payload.data, payload);
+	ret = 0;
+
+error:
+	return ret;
+}
+
+static void
+cifs_spnego_key_destroy(struct key *key)
+{
+	kfree(key->payload.data);
+}
+
+
+/*
+ * keytype for CIFS spnego keys
+ */
+struct key_type cifs_spnego_key_type = {
+	.name		= "cifs.spnego",
+	.instantiate	= cifs_spnego_key_instantiate,
+	.match		= user_match,
+	.destroy	= cifs_spnego_key_destroy,
+	.describe	= user_describe,
+};
+
+/* get a key struct with a SPNEGO security blob, suitable for session setup */
+struct key *
+cifs_get_spnego_key(struct cifsSesInfo *sesInfo, const char *hostname)
+{
+	struct TCP_Server_Info *server = sesInfo->server;
+	char *description, *dp;
+	size_t desc_len;
+	struct key *spnego_key;
+
+
+	/* version + ;ip{4|6}= + address + ;host=hostname +
+		;sec= + ;uid= + NULL */
+	desc_len = 4 + 5 + 32 + 1 + 5 + strlen(hostname) +
+		   strlen(";sec=krb5") + 7 + sizeof(uid_t)*2 + 1;
+	spnego_key = ERR_PTR(-ENOMEM);
+	description = kzalloc(desc_len, GFP_KERNEL);
+	if (description == NULL)
+		goto out;
+
+	dp = description;
+	/* start with version and hostname portion of UNC string */
+	spnego_key = ERR_PTR(-EINVAL);
+	sprintf(dp, "0x%2.2x;host=%s;", CIFS_SPNEGO_UPCALL_VERSION,
+		hostname);
+	dp = description + strlen(description);
+
+	/* add the server address */
+	if (server->addr.sockAddr.sin_family == AF_INET)
+		sprintf(dp, "ip4=" NIPQUAD_FMT,
+			NIPQUAD(server->addr.sockAddr.sin_addr));
+	else if (server->addr.sockAddr.sin_family == AF_INET6)
+		sprintf(dp, "ip6=" NIP6_SEQFMT,
+			NIP6(server->addr.sockAddr6.sin6_addr));
+	else
+		goto out;
+
+	dp = description + strlen(description);
+
+	/* for now, only sec=krb5 is valid */
+	if (server->secType == Kerberos)
+		sprintf(dp, ";sec=krb5");
+	else
+		goto out;
+
+	dp = description + strlen(description);
+	sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
+
+	cFYI(1, ("key description = %s", description));
+	spnego_key = request_key(&cifs_spnego_key_type, description, "");
+
+	if (cifsFYI && !IS_ERR(spnego_key)) {
+		struct cifs_spnego_msg *msg = spnego_key->payload.data;
+		cifs_dump_mem("SPNEGO reply blob:", msg->data,
+				msg->secblob_len + msg->sesskey_len);
+	}
+
+out:
+	kfree(description);
+	return spnego_key;
+}
diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h
new file mode 100644
index 0000000..f443f3b
--- /dev/null
+++ b/fs/cifs/cifs_spnego.h
@@ -0,0 +1,46 @@
+/*
+ *   fs/cifs/cifs_spnego.h -- SPNEGO upcall management for CIFS
+ *
+ *   Copyright (c) 2007 Red Hat, Inc.
+ *   Author(s): Jeff Layton (jlayton@redhat.com)
+ *              Steve French (sfrench@us.ibm.com)
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _CIFS_SPNEGO_H
+#define _CIFS_SPNEGO_H
+
+#define CIFS_SPNEGO_UPCALL_VERSION 1
+
+/*
+ * The version field should always be set to CIFS_SPNEGO_UPCALL_VERSION.
+ * The flags field is for future use. The request-key callout should set
+ * sesskey_len and secblob_len, and then concatenate the SessKey+SecBlob
+ * and stuff it in the data field.
+ */
+struct cifs_spnego_msg {
+	uint32_t	version;
+	uint32_t	flags;
+	uint32_t	sesskey_len;
+	uint32_t	secblob_len;
+	uint8_t		data[1];
+};
+
+#ifdef __KERNEL__
+extern struct key_type cifs_spnego_key_type;
+#endif /* KERNEL */
+
+#endif /* _CIFS_SPNEGO_H */
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index e8e5635..dabbce0 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -38,13 +38,13 @@
 	{{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
 	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(544), 0, 0, 0} }, "root"},
 	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(545), 0, 0, 0} }, "users"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(546), 0, 0, 0} }, "guest"}
-};
+	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(546), 0, 0, 0} }, "guest"} }
+;
 
 
 /* security id for everyone */
-static const struct cifs_sid sid_everyone =
-		{1, 1, {0, 0, 0, 0, 0, 0}, {} };
+static const struct cifs_sid sid_everyone = {
+	1, 1, {0, 0, 0, 0, 0, 1}, {0} };
 /* group users */
 static const struct cifs_sid sid_user =
 		{1, 2 , {0, 0, 0, 0, 0, 5}, {} };
@@ -97,7 +97,7 @@
 
 /* if the two SIDs (roughly equivalent to a UUID for a user or group) are
    the same returns 1, if they do not match returns 0 */
-int compare_sids(struct cifs_sid *ctsid, struct cifs_sid *cwsid)
+int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 {
 	int i;
 	int num_subauth, num_sat, num_saw;
@@ -129,66 +129,142 @@
 	return (1); /* sids compare/match */
 }
 
+/*
+   change posix mode to reflect permissions
+   pmode is the existing mode (we only want to overwrite part of this
+   bits to set can be: S_IRWXU, S_IRWXG or S_IRWXO ie 00700 or 00070 or 00007
+*/
+static void access_flags_to_mode(__u32 ace_flags, int type, umode_t *pmode,
+				 umode_t *pbits_to_set)
+{
+	/* the order of ACEs is important.  The canonical order is to begin with
+	   DENY entries followed by ALLOW, otherwise an allow entry could be
+	   encountered first, making the subsequent deny entry like "dead code"
+	   which would be superflous since Windows stops when a match is made
+	   for the operation you are trying to perform for your user */
 
-static void parse_ace(struct cifs_ace *pace, char *end_of_acl)
+	/* For deny ACEs we change the mask so that subsequent allow access
+	   control entries do not turn on the bits we are denying */
+	if (type == ACCESS_DENIED) {
+		if (ace_flags & GENERIC_ALL) {
+			*pbits_to_set &= ~S_IRWXUGO;
+		}
+		if ((ace_flags & GENERIC_WRITE) ||
+			((ace_flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
+			*pbits_to_set &= ~S_IWUGO;
+		if ((ace_flags & GENERIC_READ) ||
+			((ace_flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
+			*pbits_to_set &= ~S_IRUGO;
+		if ((ace_flags & GENERIC_EXECUTE) ||
+			((ace_flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
+			*pbits_to_set &= ~S_IXUGO;
+		return;
+	} else if (type != ACCESS_ALLOWED) {
+		cERROR(1, ("unknown access control type %d", type));
+		return;
+	}
+	/* else ACCESS_ALLOWED type */
+
+	if (ace_flags & GENERIC_ALL) {
+		*pmode |= (S_IRWXUGO & (*pbits_to_set));
+#ifdef CONFIG_CIFS_DEBUG2
+		cFYI(1, ("all perms"));
+#endif
+		return;
+	}
+	if ((ace_flags & GENERIC_WRITE) ||
+			((ace_flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
+		*pmode |= (S_IWUGO & (*pbits_to_set));
+	if ((ace_flags & GENERIC_READ) ||
+			((ace_flags & FILE_READ_RIGHTS) == FILE_READ_RIGHTS))
+		*pmode |= (S_IRUGO & (*pbits_to_set));
+	if ((ace_flags & GENERIC_EXECUTE) ||
+			((ace_flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
+		*pmode |= (S_IXUGO & (*pbits_to_set));
+
+#ifdef CONFIG_CIFS_DEBUG2
+	cFYI(1, ("access flags 0x%x mode now 0x%x", ace_flags, *pmode));
+#endif
+	return;
+}
+
+/*
+   Generate access flags to reflect permissions mode is the existing mode.
+   This function is called for every ACE in the DACL whose SID matches
+   with either owner or group or everyone.
+*/
+
+static void mode_to_access_flags(umode_t mode, umode_t bits_to_use,
+				__u32 *pace_flags)
+{
+	/* reset access mask */
+	*pace_flags = 0x0;
+
+	/* bits to use are either S_IRWXU or S_IRWXG or S_IRWXO */
+	mode &= bits_to_use;
+
+	/* check for R/W/X UGO since we do not know whose flags
+	   is this but we have cleared all the bits sans RWX for
+	   either user or group or other as per bits_to_use */
+	if (mode & S_IRUGO)
+		*pace_flags |= SET_FILE_READ_RIGHTS;
+	if (mode & S_IWUGO)
+		*pace_flags |= SET_FILE_WRITE_RIGHTS;
+	if (mode & S_IXUGO)
+		*pace_flags |= SET_FILE_EXEC_RIGHTS;
+
+#ifdef CONFIG_CIFS_DEBUG2
+	cFYI(1, ("mode: 0x%x, access flags now 0x%x", mode, *pace_flags));
+#endif
+	return;
+}
+
+
+#ifdef CONFIG_CIFS_DEBUG2
+static void dump_ace(struct cifs_ace *pace, char *end_of_acl)
 {
 	int num_subauth;
 
 	/* validate that we do not go past end of acl */
 
-	/* XXX this if statement can be removed
-	if (end_of_acl < (char *)pace + sizeof(struct cifs_ace)) {
+	if (le16_to_cpu(pace->size) < 16) {
+		cERROR(1, ("ACE too small, %d", le16_to_cpu(pace->size)));
+		return;
+	}
+
+	if (end_of_acl < (char *)pace + le16_to_cpu(pace->size)) {
 		cERROR(1, ("ACL too small to parse ACE"));
 		return;
-	} */
+	}
 
-	num_subauth = pace->num_subauth;
+	num_subauth = pace->sid.num_subauth;
 	if (num_subauth) {
-#ifdef CONFIG_CIFS_DEBUG2
 		int i;
-		cFYI(1, ("ACE revision %d num_subauth %d",
-			pace->revision, pace->num_subauth));
+		cFYI(1, ("ACE revision %d num_auth %d type %d flags %d size %d",
+			pace->sid.revision, pace->sid.num_subauth, pace->type,
+			pace->flags, pace->size));
 		for (i = 0; i < num_subauth; ++i) {
 			cFYI(1, ("ACE sub_auth[%d]: 0x%x", i,
-				le32_to_cpu(pace->sub_auth[i])));
+				le32_to_cpu(pace->sid.sub_auth[i])));
 		}
 
 		/* BB add length check to make sure that we do not have huge
 			num auths and therefore go off the end */
-
-		cFYI(1, ("RID %d", le32_to_cpu(pace->sub_auth[num_subauth-1])));
-#endif
 	}
 
 	return;
 }
-
-static void parse_ntace(struct cifs_ntace *pntace, char *end_of_acl)
-{
-	/* validate that we do not go past end of acl */
-	if (end_of_acl < (char *)pntace + sizeof(struct cifs_ntace)) {
-		cERROR(1, ("ACL too small to parse NT ACE"));
-		return;
-	}
-
-#ifdef CONFIG_CIFS_DEBUG2
-	cFYI(1, ("NTACE type %d flags 0x%x size %d, access Req 0x%x",
-		pntace->type, pntace->flags, pntace->size,
-		pntace->access_req));
 #endif
-	return;
-}
-
 
 
 static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
-		       struct cifs_sid *pownersid, struct cifs_sid *pgrpsid)
+		       struct cifs_sid *pownersid, struct cifs_sid *pgrpsid,
+		       struct inode *inode)
 {
 	int i;
 	int num_aces = 0;
 	int acl_size;
 	char *acl_base;
-	struct cifs_ntace **ppntace;
 	struct cifs_ace **ppace;
 
 	/* BB need to add parm so we can store the SID BB */
@@ -205,50 +281,63 @@
 		le32_to_cpu(pdacl->num_aces)));
 #endif
 
+	/* reset rwx permissions for user/group/other.
+	   Also, if num_aces is 0 i.e. DACL has no ACEs,
+	   user/group/other have no permissions */
+	inode->i_mode &= ~(S_IRWXUGO);
+
+	if (!pdacl) {
+		/* no DACL in the security descriptor, set
+		   all the permissions for user/group/other */
+		inode->i_mode |= S_IRWXUGO;
+		return;
+	}
 	acl_base = (char *)pdacl;
 	acl_size = sizeof(struct cifs_acl);
 
 	num_aces = le32_to_cpu(pdacl->num_aces);
 	if (num_aces  > 0) {
-		ppntace = kmalloc(num_aces * sizeof(struct cifs_ntace *),
-				GFP_KERNEL);
+		umode_t user_mask = S_IRWXU;
+		umode_t group_mask = S_IRWXG;
+		umode_t other_mask = S_IRWXO;
+
 		ppace = kmalloc(num_aces * sizeof(struct cifs_ace *),
 				GFP_KERNEL);
 
 /*		cifscred->cecount = pdacl->num_aces;
-		cifscred->ntaces = kmalloc(num_aces *
-			sizeof(struct cifs_ntace *), GFP_KERNEL);
 		cifscred->aces = kmalloc(num_aces *
 			sizeof(struct cifs_ace *), GFP_KERNEL);*/
 
 		for (i = 0; i < num_aces; ++i) {
-			ppntace[i] = (struct cifs_ntace *)
-					(acl_base + acl_size);
-			ppace[i] = (struct cifs_ace *) ((char *)ppntace[i] +
-					sizeof(struct cifs_ntace));
+			ppace[i] = (struct cifs_ace *) (acl_base + acl_size);
+#ifdef CONFIG_CIFS_DEBUG2
+			dump_ace(ppace[i], end_of_acl);
+#endif
+			if (compare_sids(&(ppace[i]->sid), pownersid))
+				access_flags_to_mode(ppace[i]->access_req,
+						     ppace[i]->type,
+						     &(inode->i_mode),
+						     &user_mask);
+			if (compare_sids(&(ppace[i]->sid), pgrpsid))
+				access_flags_to_mode(ppace[i]->access_req,
+						     ppace[i]->type,
+						     &(inode->i_mode),
+						     &group_mask);
+			if (compare_sids(&(ppace[i]->sid), &sid_everyone))
+				access_flags_to_mode(ppace[i]->access_req,
+						     ppace[i]->type,
+						     &(inode->i_mode),
+						     &other_mask);
 
-			parse_ntace(ppntace[i], end_of_acl);
-			if (end_of_acl < ((char *)ppace[i] +
-					(le16_to_cpu(ppntace[i]->size) -
-					sizeof(struct cifs_ntace)))) {
-				cERROR(1, ("ACL too small to parse ACE"));
-				break;
-			} else
-				parse_ace(ppace[i], end_of_acl);
-
-/*			memcpy((void *)(&(cifscred->ntaces[i])),
-				(void *)ppntace[i],
-				sizeof(struct cifs_ntace));
-			memcpy((void *)(&(cifscred->aces[i])),
+/*			memcpy((void *)(&(cifscred->aces[i])),
 				(void *)ppace[i],
 				sizeof(struct cifs_ace)); */
 
-			acl_base = (char *)ppntace[i];
-			acl_size = le16_to_cpu(ppntace[i]->size);
+			acl_base = (char *)ppace[i];
+			acl_size = le16_to_cpu(ppace[i]->size);
 		}
 
 		kfree(ppace);
-		kfree(ppntace);
 	}
 
 	return;
@@ -257,20 +346,20 @@
 
 static int parse_sid(struct cifs_sid *psid, char *end_of_acl)
 {
-
 	/* BB need to add parm so we can store the SID BB */
 
-	/* validate that we do not go past end of acl */
-	if (end_of_acl < (char *)psid + sizeof(struct cifs_sid)) {
-		cERROR(1, ("ACL too small to parse SID"));
+	/* validate that we do not go past end of ACL - sid must be at least 8
+	   bytes long (assuming no sub-auths - e.g. the null SID */
+	if (end_of_acl < (char *)psid + 8) {
+		cERROR(1, ("ACL too small to parse SID %p", psid));
 		return -EINVAL;
 	}
 
 	if (psid->num_subauth) {
 #ifdef CONFIG_CIFS_DEBUG2
 		int i;
-		cFYI(1, ("SID revision %d num_auth %d First subauth 0x%x",
-			psid->revision, psid->num_subauth, psid->sub_auth[0]));
+		cFYI(1, ("SID revision %d num_auth %d",
+			psid->revision, psid->num_subauth));
 
 		for (i = 0; i < psid->num_subauth; i++) {
 			cFYI(1, ("SID sub_auth[%d]: 0x%x ", i,
@@ -289,27 +378,32 @@
 
 
 /* Convert CIFS ACL to POSIX form */
-int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len)
+static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
+			  struct inode *inode)
 {
 	int rc;
 	struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
 	struct cifs_acl *dacl_ptr; /* no need for SACL ptr */
 	char *end_of_acl = ((char *)pntsd) + acl_len;
+	__u32 dacloffset;
+
+	if ((inode == NULL) || (pntsd == NULL))
+		return -EIO;
 
 	owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
 				le32_to_cpu(pntsd->osidoffset));
 	group_sid_ptr = (struct cifs_sid *)((char *)pntsd +
 				le32_to_cpu(pntsd->gsidoffset));
-	dacl_ptr = (struct cifs_acl *)((char *)pntsd +
-				le32_to_cpu(pntsd->dacloffset));
+	dacloffset = le32_to_cpu(pntsd->dacloffset);
+	dacl_ptr = (struct cifs_acl *)((char *)pntsd + dacloffset);
 #ifdef CONFIG_CIFS_DEBUG2
 	cFYI(1, ("revision %d type 0x%x ooffset 0x%x goffset 0x%x "
 		 "sacloffset 0x%x dacloffset 0x%x",
 		 pntsd->revision, pntsd->type, le32_to_cpu(pntsd->osidoffset),
 		 le32_to_cpu(pntsd->gsidoffset),
-		 le32_to_cpu(pntsd->sacloffset),
-		 le32_to_cpu(pntsd->dacloffset)));
+		 le32_to_cpu(pntsd->sacloffset), dacloffset));
 #endif
+/*	cifs_dump_mem("owner_sid: ", owner_sid_ptr, 64); */
 	rc = parse_sid(owner_sid_ptr, end_of_acl);
 	if (rc)
 		return rc;
@@ -318,16 +412,120 @@
 	if (rc)
 		return rc;
 
-	parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr, group_sid_ptr);
+	if (dacloffset)
+		parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
+			   group_sid_ptr, inode);
+	else
+		cFYI(1, ("no ACL")); /* BB grant all or default perms? */
 
 /*	cifscred->uid = owner_sid_ptr->rid;
 	cifscred->gid = group_sid_ptr->rid;
 	memcpy((void *)(&(cifscred->osid)), (void *)owner_sid_ptr,
-			sizeof (struct cifs_sid));
+			sizeof(struct cifs_sid));
 	memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
-			sizeof (struct cifs_sid)); */
+			sizeof(struct cifs_sid)); */
 
 
 	return (0);
 }
+
+
+/* Retrieve an ACL from the server */
+static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
+				       const char *path)
+{
+	struct cifsFileInfo *open_file;
+	int unlock_file = FALSE;
+	int xid;
+	int rc = -EIO;
+	__u16 fid;
+	struct super_block *sb;
+	struct cifs_sb_info *cifs_sb;
+	struct cifs_ntsd *pntsd = NULL;
+
+	cFYI(1, ("get mode from ACL for %s", path));
+
+	if (inode == NULL)
+		return NULL;
+
+	xid = GetXid();
+	open_file = find_readable_file(CIFS_I(inode));
+	sb = inode->i_sb;
+	if (sb == NULL) {
+		FreeXid(xid);
+		return NULL;
+	}
+	cifs_sb = CIFS_SB(sb);
+
+	if (open_file) {
+		unlock_file = TRUE;
+		fid = open_file->netfid;
+	} else {
+		int oplock = FALSE;
+		/* open file */
+		rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
+				READ_CONTROL, 0, &fid, &oplock, NULL,
+				cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (rc != 0) {
+			cERROR(1, ("Unable to open file to get ACL"));
+			FreeXid(xid);
+			return NULL;
+		}
+	}
+
+	rc = CIFSSMBGetCIFSACL(xid, cifs_sb->tcon, fid, &pntsd, pacllen);
+	cFYI(1, ("GetCIFSACL rc = %d ACL len %d", rc, *pacllen));
+	if (unlock_file == TRUE)
+		atomic_dec(&open_file->wrtPending);
+	else
+		CIFSSMBClose(xid, cifs_sb->tcon, fid);
+
+	FreeXid(xid);
+	return pntsd;
+}
+
+/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
+void acl_to_uid_mode(struct inode *inode, const char *path)
+{
+	struct cifs_ntsd *pntsd = NULL;
+	u32 acllen = 0;
+	int rc = 0;
+
+#ifdef CONFIG_CIFS_DEBUG2
+	cFYI(1, ("converting ACL to mode for %s", path));
+#endif
+	pntsd = get_cifs_acl(&acllen, inode, path);
+
+	/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
+	if (pntsd)
+		rc = parse_sec_desc(pntsd, acllen, inode);
+	if (rc)
+		cFYI(1, ("parse sec desc failed rc = %d", rc));
+
+	kfree(pntsd);
+	return;
+}
+
+/* Convert mode bits to an ACL so we can update the ACL on the server */
+int mode_to_acl(struct inode *inode, const char *path)
+{
+	int rc = 0;
+	__u32 acllen = 0;
+	struct cifs_ntsd *pntsd = NULL;
+
+	cFYI(1, ("set ACL from mode for %s", path));
+
+	/* Get the security descriptor */
+	pntsd = get_cifs_acl(&acllen, inode, path);
+
+	/* Add/Modify the three ACEs for owner, group, everyone
+	   while retaining the other ACEs */
+
+	/* Set the security descriptor */
+
+
+	kfree(pntsd);
+	return rc;
+}
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h
index 420f878..93a7c34 100644
--- a/fs/cifs/cifsacl.h
+++ b/fs/cifs/cifsacl.h
@@ -35,6 +35,9 @@
 #define UBITSHIFT	6
 #define GBITSHIFT	3
 
+#define ACCESS_ALLOWED	0
+#define ACCESS_DENIED	1
+
 struct cifs_ntsd {
 	__le16 revision; /* revision level */
 	__le16 type;
@@ -48,7 +51,7 @@
 	__u8 revision; /* revision level */
 	__u8 num_subauth;
 	__u8 authority[6];
-	__le32 sub_auth[5]; /* sub_auth[num_subauth] */ /* BB FIXME endianness BB */
+	__le32 sub_auth[5]; /* sub_auth[num_subauth] */
 } __attribute__((packed));
 
 struct cifs_acl {
@@ -57,18 +60,12 @@
 	__le32 num_aces;
 } __attribute__((packed));
 
-struct cifs_ntace { /* first part of ACE which contains perms */
+struct cifs_ace {
 	__u8 type;
 	__u8 flags;
 	__le16 size;
 	__le32 access_req;
-} __attribute__((packed));
-
-struct cifs_ace { /* last part of ACE which includes user info */
-	__u8 revision; /* revision level */
-	__u8 num_subauth;
-	__u8 authority[6];
-	__le32 sub_auth[5];
+	struct cifs_sid sid; /* ie UUID of user or group who gets these perms */
 } __attribute__((packed));
 
 struct cifs_wksid {
@@ -79,7 +76,7 @@
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 
 extern int match_sid(struct cifs_sid *);
-extern int compare_sids(struct cifs_sid *, struct cifs_sid *);
+extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
 
 #endif /*  CONFIG_CIFS_EXPERIMENTAL */
 
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 632070b..4ff8939 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -99,15 +99,16 @@
 	MD5Init(&context);
 	MD5Update(&context, (char *)&key->data, key->len);
 	for (i = 0; i < n_vec; i++) {
+		if (iov[i].iov_len == 0)
+			continue;
 		if (iov[i].iov_base == NULL) {
 			cERROR(1, ("null iovec entry"));
 			return -EIO;
-		} else if (iov[i].iov_len == 0)
-			break; /* bail out if we are sent nothing to sign */
+		}
 		/* The first entry includes a length field (which does not get
 		   signed that occupies the first 4 bytes before the header */
 		if (i == 0) {
-			if (iov[0].iov_len <= 8 ) /* cmd field at offset 9 */
+			if (iov[0].iov_len <= 8) /* cmd field at offset 9 */
 				break; /* nothing to sign or corrupt header */
 			MD5Update(&context, iov[0].iov_base+4,
 				  iov[0].iov_len-4);
@@ -122,7 +123,7 @@
 
 
 int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *server,
-		   __u32 * pexpected_response_sequence_number)
+		   __u32 *pexpected_response_sequence_number)
 {
 	int rc = 0;
 	char smb_signature[20];
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index a6fbea5..416dc9f 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -43,6 +43,8 @@
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
 #include <linux/mm.h>
+#include <linux/key-type.h>
+#include "cifs_spnego.h"
 #define CIFS_MAGIC_NUMBER 0xFF534D42	/* the first four bytes of SMB PDUs */
 
 #ifdef CONFIG_CIFS_QUOTA
@@ -1005,12 +1007,16 @@
 	rc = register_filesystem(&cifs_fs_type);
 	if (rc)
 		goto out_destroy_request_bufs;
-
+#ifdef CONFIG_CIFS_UPCALL
+	rc = register_key_type(&cifs_spnego_key_type);
+	if (rc)
+		goto out_unregister_filesystem;
+#endif
 	oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
 	if (IS_ERR(oplockThread)) {
 		rc = PTR_ERR(oplockThread);
 		cERROR(1, ("error %d create oplock thread", rc));
-		goto out_unregister_filesystem;
+		goto out_unregister_key_type;
 	}
 
 	dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
@@ -1024,7 +1030,11 @@
 
  out_stop_oplock_thread:
 	kthread_stop(oplockThread);
+ out_unregister_key_type:
+#ifdef CONFIG_CIFS_UPCALL
+	unregister_key_type(&cifs_spnego_key_type);
  out_unregister_filesystem:
+#endif
 	unregister_filesystem(&cifs_fs_type);
  out_destroy_request_bufs:
 	cifs_destroy_request_bufs();
@@ -1046,6 +1056,9 @@
 #ifdef CONFIG_PROC_FS
 	cifs_proc_clean();
 #endif
+#ifdef CONFIG_CIFS_UPCALL
+	unregister_key_type(&cifs_spnego_key_type);
+#endif
 	unregister_filesystem(&cifs_fs_type);
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 5574ba3..2a21dc6 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -106,5 +106,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.51"
+#define CIFS_VERSION   "1.52"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index c41ff74..dbe6b84 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -220,6 +220,23 @@
 				| FILE_WRITE_EA | FILE_WRITE_ATTRIBUTES)
 #define FILE_EXEC_RIGHTS (FILE_EXECUTE)
 
+#define SET_FILE_READ_RIGHTS (FILE_READ_DATA | FILE_READ_EA | FILE_WRITE_EA \
+				| FILE_READ_ATTRIBUTES \
+				| FILE_WRITE_ATTRIBUTES \
+				| DELETE | READ_CONTROL | WRITE_DAC \
+				| WRITE_OWNER | SYNCHRONIZE)
+#define SET_FILE_WRITE_RIGHTS (FILE_WRITE_DATA | FILE_APPEND_DATA \
+				| FILE_READ_EA | FILE_WRITE_EA \
+				| FILE_DELETE_CHILD | FILE_READ_ATTRIBUTES \
+				| FILE_WRITE_ATTRIBUTES \
+				| DELETE | READ_CONTROL | WRITE_DAC \
+				| WRITE_OWNER | SYNCHRONIZE)
+#define SET_FILE_EXEC_RIGHTS (FILE_READ_EA | FILE_WRITE_EA | FILE_EXECUTE \
+				| FILE_READ_ATTRIBUTES \
+				| FILE_WRITE_ATTRIBUTES \
+				| DELETE | READ_CONTROL | WRITE_DAC \
+				| WRITE_OWNER | SYNCHRONIZE)
+
 
 /*
  * Invalid readdir handle
@@ -1211,6 +1228,29 @@
 	__le32 AclFlags;
 } __attribute__((packed)) QUERY_SEC_DESC_REQ;
 
+
+typedef struct smb_com_transaction_ssec_req {
+	struct smb_hdr hdr;     /* wct = 19 */
+	__u8 MaxSetupCount;
+	__u16 Reserved;
+	__le32 TotalParameterCount;
+	__le32 TotalDataCount;
+	__le32 MaxParameterCount;
+	__le32 MaxDataCount;
+	__le32 ParameterCount;
+	__le32 ParameterOffset;
+	__le32 DataCount;
+	__le32 DataOffset;
+	__u8 SetupCount; /* no setup words follow subcommand */
+	/* SNIA spec incorrectly included spurious pad here */
+	__le16 SubCommand; /* 3 = SET_SECURITY_DESC */
+	__le16 ByteCount; /* bcc = 3 + 8 */
+	__u8 Pad[3];
+	__u16 Fid;
+	__u16 Reserved2;
+	__le32 AclFlags;
+} __attribute__((packed)) SET_SEC_DESC_REQ;
+
 typedef struct smb_com_transaction_change_notify_req {
 	struct smb_hdr hdr;     /* wct = 23 */
 	__u8 MaxSetupCount;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 1a88366..dd1d7c2 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -61,6 +61,9 @@
 extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
 extern int is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
 extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *);
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *);
+#endif
 extern unsigned int smbCalcSize(struct smb_hdr *ptr);
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
@@ -73,6 +76,8 @@
 extern int small_smb_init_no_tc(const int smb_cmd, const int wct,
 				struct cifsSesInfo *ses,
 				void **request_buf);
+extern struct key *cifs_get_spnego_key(struct cifsSesInfo *sesInfo,
+					const char *hostname);
 extern int CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			     const int stage,
 			     const struct nls_table *nls_cp);
@@ -92,6 +97,8 @@
 extern int cifs_get_inode_info_unix(struct inode **pinode,
 			const unsigned char *search_path,
 			struct super_block *sb, int xid);
+extern void acl_to_uid_mode(struct inode *inode, const char *search_path);
+extern int mode_to_acl(struct inode *inode, const char *path);
 
 extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
 			const char *);
@@ -311,7 +318,6 @@
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 extern void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key);
 #endif /* CIFS_WEAK_PW_HASH */
-extern int parse_sec_desc(struct cifs_ntsd *, int);
 extern int CIFSSMBCopy(int xid,
 			struct cifsTconInfo *source_tcon,
 			const char *fromName,
@@ -336,8 +342,7 @@
 		const void *ea_value, const __u16 ea_value_len,
 		const struct nls_table *nls_codepage, int remap_special_chars);
 extern int CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon,
-			__u16 fid, char *acl_inf, const int buflen,
-			const int acl_type /* ACCESS vs. DEFAULT */);
+			__u16 fid, struct cifs_ntsd **acl_inf, __u32 *buflen);
 extern int CIFSSMBGetPosixACL(const int xid, struct cifsTconInfo *tcon,
 		const unsigned char *searchName,
 		char *acl_inf, const int buflen, const int acl_type,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index f0d9a48..59d7b7c 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -647,8 +647,7 @@
 						 count - 16,
 						 &server->secType);
 			if (rc == 1) {
-			/* BB Need to fill struct for sessetup here */
-				rc = -EOPNOTSUPP;
+				rc = 0;
 			} else {
 				rc = -EINVAL;
 			}
@@ -2486,6 +2485,7 @@
 	return rc;
 }
 
+#ifdef CONFIG_CIFS_EXPERIMENTAL
 /* Initialize NT TRANSACT SMB into small smb request buffer.
    This assumes that all NT TRANSACTS that we init here have
    total parm and data under about 400 bytes (to fit in small cifs
@@ -2494,7 +2494,7 @@
 	MaxSetupCount (size of returned setup area) and
 	MaxParameterCount (returned parms size) must be set by caller */
 static int
-smb_init_ntransact(const __u16 sub_command, const int setup_count,
+smb_init_nttransact(const __u16 sub_command, const int setup_count,
 		   const int parm_len, struct cifsTconInfo *tcon,
 		   void **ret_buf)
 {
@@ -2525,12 +2525,15 @@
 
 static int
 validate_ntransact(char *buf, char **ppparm, char **ppdata,
-		   int *pdatalen, int *pparmlen)
+		   __u32 *pparmlen, __u32 *pdatalen)
 {
 	char *end_of_smb;
 	__u32 data_count, data_offset, parm_count, parm_offset;
 	struct smb_com_ntransact_rsp *pSMBr;
 
+	*pdatalen = 0;
+	*pparmlen = 0;
+
 	if (buf == NULL)
 		return -EINVAL;
 
@@ -2567,8 +2570,11 @@
 		cFYI(1, ("parm count and data count larger than SMB"));
 		return -EINVAL;
 	}
+	*pdatalen = data_count;
+	*pparmlen = parm_count;
 	return 0;
 }
+#endif /* CIFS_EXPERIMENTAL */
 
 int
 CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
@@ -3067,8 +3073,7 @@
 /* Get Security Descriptor (by handle) from remote server for a file or dir */
 int
 CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
-		/* BB fix up return info */ char *acl_inf, const int buflen,
-		  const int acl_type)
+		  struct cifs_ntsd **acl_inf, __u32 *pbuflen)
 {
 	int rc = 0;
 	int buf_type = 0;
@@ -3077,7 +3082,10 @@
 
 	cFYI(1, ("GetCifsACL"));
 
-	rc = smb_init_ntransact(NT_TRANSACT_QUERY_SECURITY_DESC, 0,
+	*pbuflen = 0;
+	*acl_inf = NULL;
+
+	rc = smb_init_nttransact(NT_TRANSACT_QUERY_SECURITY_DESC, 0,
 			8 /* parm len */, tcon, (void **) &pSMB);
 	if (rc)
 		return rc;
@@ -3099,34 +3107,52 @@
 	if (rc) {
 		cFYI(1, ("Send error in QuerySecDesc = %d", rc));
 	} else {                /* decode response */
-		struct cifs_ntsd *psec_desc;
 		__le32 * parm;
-		int parm_len;
-		int data_len;
-		int acl_len;
+		__u32 parm_len;
+		__u32 acl_len;
 		struct smb_com_ntransact_rsp *pSMBr;
+		char *pdata;
 
 /* validate_nttransact */
 		rc = validate_ntransact(iov[0].iov_base, (char **)&parm,
-					(char **)&psec_desc,
-					&parm_len, &data_len);
+					&pdata, &parm_len, pbuflen);
 		if (rc)
 			goto qsec_out;
 		pSMBr = (struct smb_com_ntransact_rsp *)iov[0].iov_base;
 
-		cFYI(1, ("smb %p parm %p data %p", pSMBr, parm, psec_desc));
+		cFYI(1, ("smb %p parm %p data %p", pSMBr, parm, *acl_inf));
 
 		if (le32_to_cpu(pSMBr->ParameterCount) != 4) {
 			rc = -EIO;      /* bad smb */
+			*pbuflen = 0;
 			goto qsec_out;
 		}
 
 /* BB check that data area is minimum length and as big as acl_len */
 
 		acl_len = le32_to_cpu(*parm);
-		/* BB check if (acl_len > bufsize) */
+		if (acl_len != *pbuflen) {
+			cERROR(1, ("acl length %d does not match %d",
+				   acl_len, *pbuflen));
+			if (*pbuflen > acl_len)
+				*pbuflen = acl_len;
+		}
 
-		parse_sec_desc(psec_desc, acl_len);
+		/* check if buffer is big enough for the acl
+		   header followed by the smallest SID */
+		if ((*pbuflen < sizeof(struct cifs_ntsd) + 8) ||
+		    (*pbuflen >= 64 * 1024)) {
+			cERROR(1, ("bad acl length %d", *pbuflen));
+			rc = -EINVAL;
+			*pbuflen = 0;
+		} else {
+			*acl_inf = kmalloc(*pbuflen, GFP_KERNEL);
+			if (*acl_inf == NULL) {
+				*pbuflen = 0;
+				rc = -ENOMEM;
+			}
+			memcpy(*acl_inf, pdata, *pbuflen);
+		}
 	}
 qsec_out:
 	if (buf_type == CIFS_SMALL_BUFFER)
@@ -3381,7 +3407,7 @@
 			memcpy((char *) pFindData,
 			       (char *) &pSMBr->hdr.Protocol +
 			       data_offset,
-			       sizeof (FILE_UNIX_BASIC_INFO));
+			       sizeof(FILE_UNIX_BASIC_INFO));
 		}
 	}
 	cifs_buf_release(pSMB);
@@ -3649,7 +3675,7 @@
 	pSMB->SubCommand = cpu_to_le16(TRANS2_FIND_NEXT);
 	pSMB->SearchHandle = searchHandle;      /* always kept as le */
 	pSMB->SearchCount =
-		cpu_to_le16(CIFSMaxBufSize / sizeof (FILE_UNIX_INFO));
+		cpu_to_le16(CIFSMaxBufSize / sizeof(FILE_UNIX_INFO));
 	pSMB->InformationLevel = cpu_to_le16(psrch_inf->info_level);
 	pSMB->ResumeKey = psrch_inf->resume_key;
 	pSMB->SearchFlags =
@@ -4331,7 +4357,7 @@
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < sizeof (FILE_SYSTEM_DEVICE_INFO)))
+		if (rc || (pSMBr->ByteCount < sizeof(FILE_SYSTEM_DEVICE_INFO)))
 			rc = -EIO;	/* bad smb */
 		else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 19ee11f..c52a76f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -160,7 +160,7 @@
 	if (server->ssocket) {
 		cFYI(1, ("State: 0x%x Flags: 0x%lx", server->ssocket->state,
 			server->ssocket->flags));
-		server->ssocket->ops->shutdown(server->ssocket, SEND_SHUTDOWN);
+		kernel_sock_shutdown(server->ssocket, SHUT_WR);
 		cFYI(1, ("Post shutdown state: 0x%x Flags: 0x%lx",
 			server->ssocket->state,
 			server->ssocket->flags));
@@ -793,7 +793,7 @@
 	vol->linux_gid = current->gid;
 	vol->dir_mode = S_IRWXUGO;
 	/* 2767 perms indicate mandatory locking support */
-	vol->file_mode = S_IALLUGO & ~(S_ISUID | S_IXGRP);
+	vol->file_mode = (S_IRWXUGO | S_ISGID) & (~S_IXGRP);
 
 	/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
 	vol->rw = TRUE;
@@ -1790,7 +1790,7 @@
 
 	if (volume_info.nullauth) {
 		cFYI(1, ("null user"));
-		volume_info.username = NULL;
+		volume_info.username = "";
 	} else if (volume_info.username) {
 		/* BB fixme parse for domain name here */
 		cFYI(1, ("Username: %s", volume_info.username));
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 793404b..37dc97a 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -593,7 +593,7 @@
 		 * case take precedence.  If a is not a negative dentry, this
 		 * should have no side effects
 		 */
-		memcpy((unsigned char *)a->name, b->name, a->len);
+		memcpy(a->name, b->name, a->len);
 		return 0;
 	}
 	return 1;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 1e7e4c0..68ad4ca 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1026,6 +1026,37 @@
 	return total_written;
 }
 
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode)
+{
+	struct cifsFileInfo *open_file = NULL;
+
+	read_lock(&GlobalSMBSeslock);
+	/* we could simply get the first_list_entry since write-only entries
+	   are always at the end of the list but since the first entry might
+	   have a close pending, we go through the whole list */
+	list_for_each_entry(open_file, &cifs_inode->openFileList, flist) {
+		if (open_file->closePend)
+			continue;
+		if (open_file->pfile && ((open_file->pfile->f_flags & O_RDWR) ||
+		    (open_file->pfile->f_flags & O_RDONLY))) {
+			if (!open_file->invalidHandle) {
+				/* found a good file */
+				/* lock it so it will not be closed on us */
+				atomic_inc(&open_file->wrtPending);
+				read_unlock(&GlobalSMBSeslock);
+				return open_file;
+			} /* else might as well continue, and look for
+			     another, or simply have the caller reopen it
+			     again rather than trying to fix this handle */
+		} else /* write only file */
+			break; /* write only files are last so must be done */
+	}
+	read_unlock(&GlobalSMBSeslock);
+	return NULL;
+}
+#endif
+
 struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode)
 {
 	struct cifsFileInfo *open_file;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 5e8b388..7d907e8 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -289,7 +289,7 @@
 
 #define SFBITS_MASK (S_ISVTX | S_ISGID | S_ISUID)  /* SETFILEBITS valid bits */
 
-static int get_sfu_uid_mode(struct inode *inode,
+static int get_sfu_mode(struct inode *inode,
 			const unsigned char *path,
 			struct cifs_sb_info *cifs_sb, int xid)
 {
@@ -527,11 +527,16 @@
 
 		/* BB fill in uid and gid here? with help from winbind?
 		   or retrieve from NTFS stream extended attribute */
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		/* fill in 0777 bits from ACL */
+		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+			cFYI(1, ("Getting mode bits from ACL"));
+			acl_to_uid_mode(inode, search_path);
+		}
+#endif
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
-			/* fill in uid, gid, mode from server ACL */
-			/* BB FIXME this should also take into account the
-			 * default uid specified on mount if present */
-			get_sfu_uid_mode(inode, search_path, cifs_sb, xid);
+			/* fill in remaining high mode bits e.g. SUID, VTX */
+			get_sfu_mode(inode, search_path, cifs_sb, xid);
 		} else if (atomic_read(&cifsInfo->inUse) == 0) {
 			inode->i_uid = cifs_sb->mnt_uid;
 			inode->i_gid = cifs_sb->mnt_gid;
diff --git a/fs/cifs/md5.c b/fs/cifs/md5.c
index e5c3e12..f13f96d 100644
--- a/fs/cifs/md5.c
+++ b/fs/cifs/md5.c
@@ -276,8 +276,8 @@
 	}
 
 	/* start out by storing key in pads */
-	memset(ctx->k_ipad, 0, sizeof (ctx->k_ipad));
-	memset(ctx->k_opad, 0, sizeof (ctx->k_opad));
+	memset(ctx->k_ipad, 0, sizeof(ctx->k_ipad));
+	memset(ctx->k_opad, 0, sizeof(ctx->k_opad));
 	memcpy(ctx->k_ipad, key, key_len);
 	memcpy(ctx->k_opad, key, key_len);
 
@@ -307,8 +307,8 @@
 	}
 
 	/* start out by storing key in pads */
-	memset(ctx->k_ipad, 0, sizeof (ctx->k_ipad));
-	memset(ctx->k_opad, 0, sizeof (ctx->k_opad));
+	memset(ctx->k_ipad, 0, sizeof(ctx->k_ipad));
+	memset(ctx->k_opad, 0, sizeof(ctx->k_opad));
 	memcpy(ctx->k_ipad, key, key_len);
 	memcpy(ctx->k_opad, key, key_len);
 
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 51ec681..15546c2 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -73,7 +73,7 @@
 {
 	struct cifsSesInfo *ret_buf;
 
-	ret_buf = kzalloc(sizeof (struct cifsSesInfo), GFP_KERNEL);
+	ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL);
 	if (ret_buf) {
 		write_lock(&GlobalSMBSeslock);
 		atomic_inc(&sesInfoAllocCount);
@@ -109,7 +109,7 @@
 tconInfoAlloc(void)
 {
 	struct cifsTconInfo *ret_buf;
-	ret_buf = kzalloc(sizeof (struct cifsTconInfo), GFP_KERNEL);
+	ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL);
 	if (ret_buf) {
 		write_lock(&GlobalSMBSeslock);
 		atomic_inc(&tconInfoAllocCount);
@@ -298,7 +298,7 @@
 	memset(temp, 0, 256); /* bigger than MAX_CIFS_HDR_SIZE */
 
 	buffer->smb_buf_length =
-	    (2 * word_count) + sizeof (struct smb_hdr) -
+	    (2 * word_count) + sizeof(struct smb_hdr) -
 	    4 /*  RFC 1001 length field does not count */  +
 	    2 /* for bcc field itself */ ;
 	/* Note that this is the only network field that has to be converted
@@ -422,8 +422,8 @@
 	__u32 clc_len;  /* calculated length */
 	cFYI(0, ("checkSMB Length: 0x%x, smb_buf_length: 0x%x", length, len));
 
-	if (length < 2 + sizeof (struct smb_hdr)) {
-		if ((length >= sizeof (struct smb_hdr) - 1)
+	if (length < 2 + sizeof(struct smb_hdr)) {
+		if ((length >= sizeof(struct smb_hdr) - 1)
 			    && (smb->Status.CifsError != 0)) {
 			smb->WordCount = 0;
 			/* some error cases do not return wct and bcc */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index f06359c..646e1f0 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -132,6 +132,34 @@
 	{0, 0}
 };
 
+
+/* if the mount helper is missing we need to reverse the 1st slash
+   from '/' to backslash in order to format the UNC properly for
+   ip address parsing and for tree connect (unless the user
+   remembered to put the UNC name in properly). Fortunately we do
+   not have to call this twice (we check for IPv4 addresses
+   first, so it is already converted by the time we
+   try IPv6 addresses */
+static int canonicalize_unc(char *cp)
+{
+	int i;
+
+	for (i = 0; i <= 46 /* INET6_ADDRSTRLEN */ ; i++) {
+		if (cp[i] == 0)
+			break;
+		if (cp[i] == '\\')
+			break;
+		if (cp[i] == '/') {
+#ifdef CONFIG_CIFS_DEBUG2
+			cFYI(1, ("change slash to backslash in malformed UNC"));
+#endif
+			cp[i] = '\\';
+			return 1;
+		}
+	}
+	return 0;
+}
+
 /* Convert string containing dotted ip address to binary form */
 /* returns 0 if invalid address */
 
@@ -141,11 +169,13 @@
 	int ret = 0;
 
 	/* calculate length by finding first slash or NULL */
-	/* BB Should we convert '/' slash to '\' here since it seems already
-	 * done before this */
-	if ( address_family == AF_INET ) {
-		ret = in4_pton(cp, -1 /* len */, dst , '\\', NULL);
-	} else if ( address_family == AF_INET6 ) {
+	if (address_family == AF_INET) {
+		ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
+		if (ret == 0) {
+			if (canonicalize_unc(cp))
+				ret = in4_pton(cp, -1, dst, '\\', NULL);
+		}
+	} else if (address_family == AF_INET6) {
 		ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
 	}
 #ifdef CONFIG_CIFS_DEBUG2
@@ -740,7 +770,7 @@
 
 
 static void
-ntstatus_to_dos(__u32 ntstatus, __u8 * eclass, __u16 * ecode)
+ntstatus_to_dos(__u32 ntstatus, __u8 *eclass, __u16 *ecode)
 {
 	int i;
 	if (ntstatus == 0) {
@@ -793,8 +823,8 @@
 	if (smberrclass == ERRDOS) {  /* 1 byte field no need to byte reverse */
 		for (i = 0;
 		     i <
-		     sizeof (mapping_table_ERRDOS) /
-		     sizeof (struct smb_to_posix_error); i++) {
+		     sizeof(mapping_table_ERRDOS) /
+		     sizeof(struct smb_to_posix_error); i++) {
 			if (mapping_table_ERRDOS[i].smb_err == 0)
 				break;
 			else if (mapping_table_ERRDOS[i].smb_err ==
@@ -807,8 +837,8 @@
 	} else if (smberrclass == ERRSRV) {   /* server class of error codes */
 		for (i = 0;
 		     i <
-		     sizeof (mapping_table_ERRSRV) /
-		     sizeof (struct smb_to_posix_error); i++) {
+		     sizeof(mapping_table_ERRSRV) /
+		     sizeof(struct smb_to_posix_error); i++) {
 			if (mapping_table_ERRSRV[i].smb_err == 0)
 				break;
 			else if (mapping_table_ERRSRV[i].smb_err ==
@@ -837,14 +867,14 @@
 unsigned int
 smbCalcSize(struct smb_hdr *ptr)
 {
-	return (sizeof (struct smb_hdr) + (2 * ptr->WordCount) +
+	return (sizeof(struct smb_hdr) + (2 * ptr->WordCount) +
 		2 /* size of the bcc field */ + BCC(ptr));
 }
 
 unsigned int
 smbCalcSize_LE(struct smb_hdr *ptr)
 {
-	return (sizeof (struct smb_hdr) + (2 * ptr->WordCount) +
+	return (sizeof(struct smb_hdr) + (2 * ptr->WordCount) +
 		2 /* size of the bcc field */ + le16_to_cpu(BCC_LE(ptr)));
 }
 
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 3746580..0f22def 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -171,7 +171,13 @@
 	/* Linux can not store file creation time unfortunately so ignore it */
 
 	cifsInfo->cifsAttrs = attr;
-	cifsInfo->time = jiffies;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+		/* get more accurate mode via ACL - so force inode refresh */
+		cifsInfo->time = 0;
+	} else
+#endif /* CONFIG_CIFS_EXPERIMENTAL */
+		cifsInfo->time = jiffies;
 
 	/* treat dos attribute of read-only as read-only mode bit e.g. 555? */
 	/* 2767 perms - indicate mandatory locking */
@@ -495,7 +501,7 @@
 static int cifs_unicode_bytelen(char *str)
 {
 	int len;
-	__le16 * ustr = (__le16 *)str;
+	__le16 *ustr = (__le16 *)str;
 
 	for (len = 0; len <= PATH_MAX; len++) {
 		if (ustr[len] == 0)
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index 90542a3..58bbfd9 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -80,7 +80,7 @@
 
 /* Routines for Windows NT MD4 Hash functions. */
 static int
-_my_wcslen(__u16 * str)
+_my_wcslen(__u16 *str)
 {
 	int len = 0;
 	while (*str++ != 0)
@@ -96,7 +96,7 @@
  */
 
 static int
-_my_mbstowcs(__u16 * dst, const unsigned char *src, int len)
+_my_mbstowcs(__u16 *dst, const unsigned char *src, int len)
 {	/* BB not a very good conversion routine - change/fix */
 	int i;
 	__u16 val;
@@ -125,9 +125,9 @@
 	/* Password cannot be longer than 128 characters */
 	if (passwd) {
 		len = strlen((char *) passwd);
-		if (len > 128) {
+		if (len > 128)
 			len = 128;
-		}
+
 		/* Password must be converted to NT unicode */
 		_my_mbstowcs(wpwd, passwd, len);
 	} else
@@ -135,7 +135,7 @@
 
 	wpwd[len] = 0;	/* Ensure string is null terminated */
 	/* Calculate length in bytes */
-	len = _my_wcslen(wpwd) * sizeof (__u16);
+	len = _my_wcslen(wpwd) * sizeof(__u16);
 
 	mdfour(p16, (unsigned char *) wpwd, len);
 	memset(wpwd, 0, 129 * 2);
@@ -167,7 +167,7 @@
 	E_P16((unsigned char *) passwd, (unsigned char *) p16);
 
 	/* clear out local copy of user's password (just being paranoid). */
-	memset(passwd, '\0', sizeof (passwd));
+	memset(passwd, '\0', sizeof(passwd));
 }
 #endif
 
@@ -189,8 +189,10 @@
 		return;
 	dom_u = user_u + 1024;
 
-	/* push_ucs2(NULL, user_u, user_n, (user_l+1)*2, STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER);
-	   push_ucs2(NULL, dom_u, domain_n, (domain_l+1)*2, STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER); */
+	/* push_ucs2(NULL, user_u, user_n, (user_l+1)*2,
+			STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER);
+	   push_ucs2(NULL, dom_u, domain_n, (domain_l+1)*2,
+			STR_UNICODE|STR_NOALIGN|STR_TERMINATE|STR_UPPER); */
 
 	/* BB user and domain may need to be uppercased */
 	user_l = cifs_strtoUCS(user_u, user_n, 511, nls_codepage);
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index 369e838..54e8ef9 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -265,7 +265,9 @@
 		else if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
 			__u16 fid;
 			int oplock = FALSE;
-			if (experimEnabled) 
+			struct cifs_ntsd *pacl = NULL;
+			__u32 buflen = 0;
+			if (experimEnabled)
 				rc = CIFSSMBOpen(xid, pTcon, full_path,
 					FILE_OPEN, GENERIC_READ, 0, &fid,
 					&oplock, NULL, cifs_sb->local_nls,
@@ -273,10 +275,9 @@
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 			/* else rc is EOPNOTSUPP from above */
 
-			if(rc == 0) {
-				rc = CIFSSMBGetCIFSACL(xid, pTcon, fid,
-					ea_value, buf_size,
-					ACL_TYPE_ACCESS);
+			if (rc == 0) {
+				rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl,
+						      &buflen);
 				CIFSSMBClose(xid, pTcon, fid);
 			}
 		}
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 58bf3f5..e9923ca 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -1062,7 +1062,7 @@
 	subscribe.sctp_shutdown_event = 1;
 	subscribe.sctp_partial_delivery_event = 1;
 
-	result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
+	result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUFFORCE,
 				 (char *)&bufsize, sizeof(bufsize));
 	if (result)
 		log_print("Error increasing buffer space on socket %d", result);
@@ -1454,10 +1454,6 @@
 	if (!con_cache)
 		goto out;
 
-	/* Set some sysctl minima */
-	if (sysctl_rmem_max < NEEDED_RMEM)
-		sysctl_rmem_max = NEEDED_RMEM;
-
 	/* Start listening */
 	if (dlm_config.ci_protocol == 0)
 		error = tcp_listen_for_all();
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 9d70289..bbed2fd 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -115,11 +115,29 @@
 		}
 		crypt_stat->hash_tfm = desc.tfm;
 	}
-	crypto_hash_init(&desc);
-	crypto_hash_update(&desc, &sg, len);
-	crypto_hash_final(&desc, dst);
-	mutex_unlock(&crypt_stat->cs_hash_tfm_mutex);
+	rc = crypto_hash_init(&desc);
+	if (rc) {
+		printk(KERN_ERR
+		       "%s: Error initializing crypto hash; rc = [%d]\n",
+		       __FUNCTION__, rc);
+		goto out;
+	}
+	rc = crypto_hash_update(&desc, &sg, len);
+	if (rc) {
+		printk(KERN_ERR
+		       "%s: Error updating crypto hash; rc = [%d]\n",
+		       __FUNCTION__, rc);
+		goto out;
+	}
+	rc = crypto_hash_final(&desc, dst);
+	if (rc) {
+		printk(KERN_ERR
+		       "%s: Error finalizing crypto hash; rc = [%d]\n",
+		       __FUNCTION__, rc);
+		goto out;
+	}
 out:
+	mutex_unlock(&crypt_stat->cs_hash_tfm_mutex);
 	return rc;
 }
 
@@ -504,7 +522,6 @@
 					"\n", rc);
 			goto out;
 		}
-		extent_offset++;
 	}
 out:
 	kfree(enc_extent_virt);
@@ -640,7 +657,6 @@
 			       "rc = [%d]\n", __FUNCTION__, rc);
 			goto out;
 		}
-		extent_offset++;
 	}
 out:
 	kfree(enc_extent_virt);
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index 2150edf..6b7474a 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -87,7 +87,7 @@
 	loff_t offset;
 	int rc;
 
-	offset = ((((off_t)page_for_lower->index) << PAGE_CACHE_SHIFT)
+	offset = ((((loff_t)page_for_lower->index) << PAGE_CACHE_SHIFT)
 		  + offset_in_page);
 	virt = kmap(page_for_lower);
 	rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size);
diff --git a/fs/exec.c b/fs/exec.c
index 2c942e2..4ccaaa4 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1692,7 +1692,10 @@
 	if (!binfmt || !binfmt->core_dump)
 		goto fail;
 	down_write(&mm->mmap_sem);
-	if (!get_dumpable(mm)) {
+	/*
+	 * If another thread got here first, or we are not dumpable, bail out.
+	 */
+	if (mm->core_waiters || !get_dumpable(mm)) {
 		up_write(&mm->mmap_sem);
 		goto fail;
 	}
@@ -1706,7 +1709,6 @@
 		flag = O_EXCL;		/* Stop rewrite attacks */
 		current->fsuid = 0;	/* Dump root private */
 	}
-	set_dumpable(mm, 0);
 
 	retval = coredump_wait(exit_code);
 	if (retval < 0)
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index 18a42de..377ad17 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -69,14 +69,6 @@
 	return desc + offset;
 }
 
-static inline int
-block_in_use(unsigned long block, struct super_block *sb, unsigned char *map)
-{
-	return ext2_test_bit ((block -
-		le32_to_cpu(EXT2_SB(sb)->s_es->s_first_data_block)) %
-			 EXT2_BLOCKS_PER_GROUP(sb), map);
-}
-
 /*
  * Read the bitmap for a given block_group, reading into the specified 
  * slot in the superblock's bitmap cache.
@@ -86,51 +78,20 @@
 static struct buffer_head *
 read_block_bitmap(struct super_block *sb, unsigned int block_group)
 {
-	int i;
 	struct ext2_group_desc * desc;
 	struct buffer_head * bh = NULL;
-	unsigned int bitmap_blk;
-
+	
 	desc = ext2_get_group_desc (sb, block_group, NULL);
 	if (!desc)
-		return NULL;
-	bitmap_blk = le32_to_cpu(desc->bg_block_bitmap);
-	bh = sb_bread(sb, bitmap_blk);
+		goto error_out;
+	bh = sb_bread(sb, le32_to_cpu(desc->bg_block_bitmap));
 	if (!bh)
-		ext2_error (sb, __FUNCTION__,
+		ext2_error (sb, "read_block_bitmap",
 			    "Cannot read block bitmap - "
 			    "block_group = %d, block_bitmap = %u",
 			    block_group, le32_to_cpu(desc->bg_block_bitmap));
-
-	/* check whether block bitmap block number is set */
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-	/* check whether the inode bitmap block number is set */
-	bitmap_blk = le32_to_cpu(desc->bg_inode_bitmap);
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-	/* check whether the inode table block number is set */
-	bitmap_blk = le32_to_cpu(desc->bg_inode_table);
-	for (i = 0; i < EXT2_SB(sb)->s_itb_per_group; i++, bitmap_blk++) {
-		if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-			/* bad block bitmap */
-			goto error_out;
-		}
-	}
-
-	return bh;
-
 error_out:
-	brelse(bh);
-	ext2_error(sb, __FUNCTION__,
-			"Invalid block bitmap - "
-			"block_group = %d, block = %u",
-			block_group, bitmap_blk);
-	return NULL;
+	return bh;
 }
 
 static void release_blocks(struct super_block *sb, int count)
@@ -1461,7 +1422,6 @@
 #endif
 }
 
-
 static inline int test_root(int a, int b)
 {
 	int num = b;
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index c2324d5..320b2cb 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -47,6 +47,11 @@
 			flags &= ~EXT2_DIRSYNC_FL;
 
 		mutex_lock(&inode->i_mutex);
+		/* Is it quota file? Do not allow user to mess with it */
+		if (IS_NOQUOTA(inode)) {
+			mutex_unlock(&inode->i_mutex);
+			return -EPERM;
+		}
 		oldflags = ei->i_flags;
 
 		/*
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 7a87d15..a8ba7e8 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -80,14 +80,6 @@
 	return desc + offset;
 }
 
-static inline int
-block_in_use(ext3_fsblk_t block, struct super_block *sb, unsigned char *map)
-{
-	return ext3_test_bit ((block -
-		le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block)) %
-			 EXT3_BLOCKS_PER_GROUP(sb), map);
-}
-
 /**
  * read_block_bitmap()
  * @sb:			super block
@@ -101,51 +93,20 @@
 static struct buffer_head *
 read_block_bitmap(struct super_block *sb, unsigned int block_group)
 {
-	int i;
 	struct ext3_group_desc * desc;
 	struct buffer_head * bh = NULL;
-	ext3_fsblk_t bitmap_blk;
 
 	desc = ext3_get_group_desc (sb, block_group, NULL);
 	if (!desc)
-		return NULL;
-	bitmap_blk = le32_to_cpu(desc->bg_block_bitmap);
-	bh = sb_bread(sb, bitmap_blk);
+		goto error_out;
+	bh = sb_bread(sb, le32_to_cpu(desc->bg_block_bitmap));
 	if (!bh)
-		ext3_error (sb, __FUNCTION__,
+		ext3_error (sb, "read_block_bitmap",
 			    "Cannot read block bitmap - "
 			    "block_group = %d, block_bitmap = %u",
 			    block_group, le32_to_cpu(desc->bg_block_bitmap));
-
-	/* check whether block bitmap block number is set */
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-	/* check whether the inode bitmap block number is set */
-	bitmap_blk = le32_to_cpu(desc->bg_inode_bitmap);
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-	/* check whether the inode table block number is set */
-	bitmap_blk = le32_to_cpu(desc->bg_inode_table);
-	for (i = 0; i < EXT3_SB(sb)->s_itb_per_group; i++, bitmap_blk++) {
-		if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-			/* bad block bitmap */
-			goto error_out;
-		}
-	}
-
-	return bh;
-
 error_out:
-	brelse(bh);
-	ext3_error(sb, __FUNCTION__,
-			"Invalid block bitmap - "
-			"block_group = %d, block = %lu",
-			block_group, bitmap_blk);
-	return NULL;
+	return bh;
 }
 /*
  * The reservation window structure operations
@@ -1772,7 +1733,6 @@
 #endif
 }
 
-
 static inline int test_root(int a, int b)
 {
 	int num = b;
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index c8e4ee3..8ca3bfd 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -67,7 +67,7 @@
 			  unsigned long offset)
 {
 	const char * error_msg = NULL;
-	const int rlen = le16_to_cpu(de->rec_len);
+	const int rlen = ext3_rec_len_from_disk(de->rec_len);
 
 	if (rlen < EXT3_DIR_REC_LEN(1))
 		error_msg = "rec_len is smaller than minimal";
@@ -173,10 +173,10 @@
 				 * least that it is non-zero.  A
 				 * failure will be detected in the
 				 * dirent test below. */
-				if (le16_to_cpu(de->rec_len) <
+				if (ext3_rec_len_from_disk(de->rec_len) <
 						EXT3_DIR_REC_LEN(1))
 					break;
-				i += le16_to_cpu(de->rec_len);
+				i += ext3_rec_len_from_disk(de->rec_len);
 			}
 			offset = i;
 			filp->f_pos = (filp->f_pos & ~(sb->s_blocksize - 1))
@@ -197,7 +197,7 @@
 				ret = stored;
 				goto out;
 			}
-			offset += le16_to_cpu(de->rec_len);
+			offset += ext3_rec_len_from_disk(de->rec_len);
 			if (le32_to_cpu(de->inode)) {
 				/* We might block in the next section
 				 * if the data destination is
@@ -219,7 +219,7 @@
 					goto revalidate;
 				stored ++;
 			}
-			filp->f_pos += le16_to_cpu(de->rec_len);
+			filp->f_pos += ext3_rec_len_from_disk(de->rec_len);
 		}
 		offset = 0;
 		brelse (bh);
diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c
index 4a2a02c..023a070 100644
--- a/fs/ext3/ioctl.c
+++ b/fs/ext3/ioctl.c
@@ -51,6 +51,11 @@
 			flags &= ~EXT3_DIRSYNC_FL;
 
 		mutex_lock(&inode->i_mutex);
+		/* Is it quota file? Do not allow user to mess with it */
+		if (IS_NOQUOTA(inode)) {
+			mutex_unlock(&inode->i_mutex);
+			return -EPERM;
+		}
 		oldflags = ei->i_flags;
 
 		/* The JOURNAL_DATA flag is modifiable only by root */
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index ec8170a..4ab6f76 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -177,6 +177,16 @@
 			     struct inode *inode);
 
 /*
+ * p is at least 6 bytes before the end of page
+ */
+static inline struct ext3_dir_entry_2 *
+ext3_next_entry(struct ext3_dir_entry_2 *p)
+{
+	return (struct ext3_dir_entry_2 *)((char *)p +
+		ext3_rec_len_from_disk(p->rec_len));
+}
+
+/*
  * Future: use high four bits of block for coalesce-on-delete flags
  * Mask them off for now.
  */
@@ -280,7 +290,7 @@
 			space += EXT3_DIR_REC_LEN(de->name_len);
 			names++;
 		}
-		de = (struct ext3_dir_entry_2 *) ((char *) de + le16_to_cpu(de->rec_len));
+		de = ext3_next_entry(de);
 	}
 	printk("(%i)\n", names);
 	return (struct stats) { names, space, 1 };
@@ -547,14 +557,6 @@
 
 
 /*
- * p is at least 6 bytes before the end of page
- */
-static inline struct ext3_dir_entry_2 *ext3_next_entry(struct ext3_dir_entry_2 *p)
-{
-	return (struct ext3_dir_entry_2 *)((char*)p + le16_to_cpu(p->rec_len));
-}
-
-/*
  * This function fills a red-black tree with information from a
  * directory block.  It returns the number directory entries loaded
  * into the tree.  If there is an error it is returned in err.
@@ -720,7 +722,7 @@
 			cond_resched();
 		}
 		/* XXX: do we need to check rec_len == 0 case? -Chris */
-		de = (struct ext3_dir_entry_2 *) ((char *) de + le16_to_cpu(de->rec_len));
+		de = ext3_next_entry(de);
 	}
 	return count;
 }
@@ -822,7 +824,7 @@
 			return 1;
 		}
 		/* prevent looping on a bad block */
-		de_len = le16_to_cpu(de->rec_len);
+		de_len = ext3_rec_len_from_disk(de->rec_len);
 		if (de_len <= 0)
 			return -1;
 		offset += de_len;
@@ -1130,7 +1132,7 @@
 		rec_len = EXT3_DIR_REC_LEN(de->name_len);
 		memcpy (to, de, rec_len);
 		((struct ext3_dir_entry_2 *) to)->rec_len =
-				cpu_to_le16(rec_len);
+				ext3_rec_len_to_disk(rec_len);
 		de->inode = 0;
 		map++;
 		to += rec_len;
@@ -1149,13 +1151,12 @@
 
 	prev = to = de;
 	while ((char*)de < base + size) {
-		next = (struct ext3_dir_entry_2 *) ((char *) de +
-						    le16_to_cpu(de->rec_len));
+		next = ext3_next_entry(de);
 		if (de->inode && de->name_len) {
 			rec_len = EXT3_DIR_REC_LEN(de->name_len);
 			if (de > to)
 				memmove(to, de, rec_len);
-			to->rec_len = cpu_to_le16(rec_len);
+			to->rec_len = ext3_rec_len_to_disk(rec_len);
 			prev = to;
 			to = (struct ext3_dir_entry_2 *) (((char *) to) + rec_len);
 		}
@@ -1229,8 +1230,8 @@
 	/* Fancy dance to stay within two buffers */
 	de2 = dx_move_dirents(data1, data2, map + split, count - split);
 	de = dx_pack_dirents(data1,blocksize);
-	de->rec_len = cpu_to_le16(data1 + blocksize - (char *) de);
-	de2->rec_len = cpu_to_le16(data2 + blocksize - (char *) de2);
+	de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de);
+	de2->rec_len = ext3_rec_len_to_disk(data2 + blocksize - (char *) de2);
 	dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data1, blocksize, 1));
 	dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data2, blocksize, 1));
 
@@ -1300,7 +1301,7 @@
 				return -EEXIST;
 			}
 			nlen = EXT3_DIR_REC_LEN(de->name_len);
-			rlen = le16_to_cpu(de->rec_len);
+			rlen = ext3_rec_len_from_disk(de->rec_len);
 			if ((de->inode? rlen - nlen: rlen) >= reclen)
 				break;
 			de = (struct ext3_dir_entry_2 *)((char *)de + rlen);
@@ -1319,11 +1320,11 @@
 
 	/* By now the buffer is marked for journaling */
 	nlen = EXT3_DIR_REC_LEN(de->name_len);
-	rlen = le16_to_cpu(de->rec_len);
+	rlen = ext3_rec_len_from_disk(de->rec_len);
 	if (de->inode) {
 		struct ext3_dir_entry_2 *de1 = (struct ext3_dir_entry_2 *)((char *)de + nlen);
-		de1->rec_len = cpu_to_le16(rlen - nlen);
-		de->rec_len = cpu_to_le16(nlen);
+		de1->rec_len = ext3_rec_len_to_disk(rlen - nlen);
+		de->rec_len = ext3_rec_len_to_disk(nlen);
 		de = de1;
 	}
 	de->file_type = EXT3_FT_UNKNOWN;
@@ -1400,17 +1401,18 @@
 
 	/* The 0th block becomes the root, move the dirents out */
 	fde = &root->dotdot;
-	de = (struct ext3_dir_entry_2 *)((char *)fde + le16_to_cpu(fde->rec_len));
+	de = (struct ext3_dir_entry_2 *)((char *)fde +
+			ext3_rec_len_from_disk(fde->rec_len));
 	len = ((char *) root) + blocksize - (char *) de;
 	memcpy (data1, de, len);
 	de = (struct ext3_dir_entry_2 *) data1;
 	top = data1 + len;
-	while ((char *)(de2=(void*)de+le16_to_cpu(de->rec_len)) < top)
+	while ((char *)(de2 = ext3_next_entry(de)) < top)
 		de = de2;
-	de->rec_len = cpu_to_le16(data1 + blocksize - (char *) de);
+	de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de);
 	/* Initialize the root; the dot dirents already exist */
 	de = (struct ext3_dir_entry_2 *) (&root->dotdot);
-	de->rec_len = cpu_to_le16(blocksize - EXT3_DIR_REC_LEN(2));
+	de->rec_len = ext3_rec_len_to_disk(blocksize - EXT3_DIR_REC_LEN(2));
 	memset (&root->info, 0, sizeof(root->info));
 	root->info.info_length = sizeof(root->info);
 	root->info.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version;
@@ -1490,7 +1492,7 @@
 		return retval;
 	de = (struct ext3_dir_entry_2 *) bh->b_data;
 	de->inode = 0;
-	de->rec_len = cpu_to_le16(blocksize);
+	de->rec_len = ext3_rec_len_to_disk(blocksize);
 	return add_dirent_to_buf(handle, dentry, inode, de, bh);
 }
 
@@ -1553,7 +1555,7 @@
 			goto cleanup;
 		node2 = (struct dx_node *)(bh2->b_data);
 		entries2 = node2->entries;
-		node2->fake.rec_len = cpu_to_le16(sb->s_blocksize);
+		node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize);
 		node2->fake.inode = 0;
 		BUFFER_TRACE(frame->bh, "get_write_access");
 		err = ext3_journal_get_write_access(handle, frame->bh);
@@ -1651,9 +1653,9 @@
 			BUFFER_TRACE(bh, "get_write_access");
 			ext3_journal_get_write_access(handle, bh);
 			if (pde)
-				pde->rec_len =
-					cpu_to_le16(le16_to_cpu(pde->rec_len) +
-						    le16_to_cpu(de->rec_len));
+				pde->rec_len = ext3_rec_len_to_disk(
+					ext3_rec_len_from_disk(pde->rec_len) +
+					ext3_rec_len_from_disk(de->rec_len));
 			else
 				de->inode = 0;
 			dir->i_version++;
@@ -1661,10 +1663,9 @@
 			ext3_journal_dirty_metadata(handle, bh);
 			return 0;
 		}
-		i += le16_to_cpu(de->rec_len);
+		i += ext3_rec_len_from_disk(de->rec_len);
 		pde = de;
-		de = (struct ext3_dir_entry_2 *)
-			((char *) de + le16_to_cpu(de->rec_len));
+		de = ext3_next_entry(de);
 	}
 	return -ENOENT;
 }
@@ -1798,13 +1799,13 @@
 	de = (struct ext3_dir_entry_2 *) dir_block->b_data;
 	de->inode = cpu_to_le32(inode->i_ino);
 	de->name_len = 1;
-	de->rec_len = cpu_to_le16(EXT3_DIR_REC_LEN(de->name_len));
+	de->rec_len = ext3_rec_len_to_disk(EXT3_DIR_REC_LEN(de->name_len));
 	strcpy (de->name, ".");
 	ext3_set_de_type(dir->i_sb, de, S_IFDIR);
-	de = (struct ext3_dir_entry_2 *)
-			((char *) de + le16_to_cpu(de->rec_len));
+	de = ext3_next_entry(de);
 	de->inode = cpu_to_le32(dir->i_ino);
-	de->rec_len = cpu_to_le16(inode->i_sb->s_blocksize-EXT3_DIR_REC_LEN(1));
+	de->rec_len = ext3_rec_len_to_disk(inode->i_sb->s_blocksize -
+					EXT3_DIR_REC_LEN(1));
 	de->name_len = 2;
 	strcpy (de->name, "..");
 	ext3_set_de_type(dir->i_sb, de, S_IFDIR);
@@ -1856,8 +1857,7 @@
 		return 1;
 	}
 	de = (struct ext3_dir_entry_2 *) bh->b_data;
-	de1 = (struct ext3_dir_entry_2 *)
-			((char *) de + le16_to_cpu(de->rec_len));
+	de1 = ext3_next_entry(de);
 	if (le32_to_cpu(de->inode) != inode->i_ino ||
 			!le32_to_cpu(de1->inode) ||
 			strcmp (".", de->name) ||
@@ -1868,9 +1868,9 @@
 		brelse (bh);
 		return 1;
 	}
-	offset = le16_to_cpu(de->rec_len) + le16_to_cpu(de1->rec_len);
-	de = (struct ext3_dir_entry_2 *)
-			((char *) de1 + le16_to_cpu(de1->rec_len));
+	offset = ext3_rec_len_from_disk(de->rec_len) +
+			ext3_rec_len_from_disk(de1->rec_len);
+	de = ext3_next_entry(de1);
 	while (offset < inode->i_size ) {
 		if (!bh ||
 			(void *) de >= (void *) (bh->b_data+sb->s_blocksize)) {
@@ -1899,9 +1899,8 @@
 			brelse (bh);
 			return 0;
 		}
-		offset += le16_to_cpu(de->rec_len);
-		de = (struct ext3_dir_entry_2 *)
-				((char *) de + le16_to_cpu(de->rec_len));
+		offset += ext3_rec_len_from_disk(de->rec_len);
+		de = ext3_next_entry(de);
 	}
 	brelse (bh);
 	return 1;
@@ -2255,8 +2254,7 @@
 }
 
 #define PARENT_INO(buffer) \
-	((struct ext3_dir_entry_2 *) ((char *) buffer + \
-	le16_to_cpu(((struct ext3_dir_entry_2 *) buffer)->rec_len)))->inode
+	(ext3_next_entry((struct ext3_dir_entry_2 *)(buffer))->inode)
 
 /*
  * Anybody can rename anything with this: the permission checks are left to the
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index e906b65..71ee95e 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -189,15 +189,6 @@
 	return desc;
 }
 
-static inline int
-block_in_use(ext4_fsblk_t block, struct super_block *sb, unsigned char *map)
-{
-	ext4_grpblk_t offset;
-
-	ext4_get_group_no_and_offset(sb, block, NULL, &offset);
-	return ext4_test_bit (offset, map);
-}
-
 /**
  * read_block_bitmap()
  * @sb:			super block
@@ -211,7 +202,6 @@
 struct buffer_head *
 read_block_bitmap(struct super_block *sb, unsigned int block_group)
 {
-	int i;
 	struct ext4_group_desc * desc;
 	struct buffer_head * bh = NULL;
 	ext4_fsblk_t bitmap_blk;
@@ -239,38 +229,7 @@
 			    "Cannot read block bitmap - "
 			    "block_group = %d, block_bitmap = %llu",
 			    block_group, bitmap_blk);
-
-	/* check whether block bitmap block number is set */
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-
-	/* check whether the inode bitmap block number is set */
-	bitmap_blk = ext4_inode_bitmap(sb, desc);
-	if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-		/* bad block bitmap */
-		goto error_out;
-	}
-	/* check whether the inode table block number is set */
-	bitmap_blk = ext4_inode_table(sb, desc);
-	for (i = 0; i < EXT4_SB(sb)->s_itb_per_group; i++, bitmap_blk++) {
-		if (!block_in_use(bitmap_blk, sb, bh->b_data)) {
-			/* bad block bitmap */
-			goto error_out;
-		}
-	}
-
 	return bh;
-
-error_out:
-	brelse(bh);
-	ext4_error(sb, __FUNCTION__,
-			"Invalid block bitmap - "
-			"block_group = %d, block = %llu",
-			block_group, bitmap_blk);
-	return NULL;
-
 }
 /*
  * The reservation window structure operations
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index c04c7cc..e7f894b 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -51,6 +51,11 @@
 			flags &= ~EXT4_DIRSYNC_FL;
 
 		mutex_lock(&inode->i_mutex);
+		/* Is it quota file? Do not allow user to mess with it */
+		if (IS_NOQUOTA(inode)) {
+			mutex_unlock(&inode->i_mutex);
+			return -EPERM;
+		}
 		oldflags = ei->i_flags;
 
 		/* The JOURNAL_DATA flag is modifiable only by root */
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 0fcdba9..535b373 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -55,9 +55,10 @@
 		if (!ff->reserved_req) {
 			kfree(ff);
 			ff = NULL;
+		} else {
+			INIT_LIST_HEAD(&ff->write_entry);
+			atomic_set(&ff->count, 0);
 		}
-		INIT_LIST_HEAD(&ff->write_entry);
-		atomic_set(&ff->count, 0);
 	}
 	return ff;
 }
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 12aca8e..09ee07f 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -364,7 +364,6 @@
 			++next;
 			truncate_huge_page(page);
 			unlock_page(page);
-			hugetlb_put_quota(mapping);
 			freed++;
 		}
 		huge_pagevec_release(&pvec);
@@ -859,15 +858,15 @@
 	return -ENOMEM;
 }
 
-int hugetlb_get_quota(struct address_space *mapping)
+int hugetlb_get_quota(struct address_space *mapping, long delta)
 {
 	int ret = 0;
 	struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(mapping->host->i_sb);
 
 	if (sbinfo->free_blocks > -1) {
 		spin_lock(&sbinfo->stat_lock);
-		if (sbinfo->free_blocks > 0)
-			sbinfo->free_blocks--;
+		if (sbinfo->free_blocks - delta >= 0)
+			sbinfo->free_blocks -= delta;
 		else
 			ret = -ENOMEM;
 		spin_unlock(&sbinfo->stat_lock);
@@ -876,13 +875,13 @@
 	return ret;
 }
 
-void hugetlb_put_quota(struct address_space *mapping)
+void hugetlb_put_quota(struct address_space *mapping, long delta)
 {
 	struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(mapping->host->i_sb);
 
 	if (sbinfo->free_blocks > -1) {
 		spin_lock(&sbinfo->stat_lock);
-		sbinfo->free_blocks++;
+		sbinfo->free_blocks += delta;
 		spin_unlock(&sbinfo->stat_lock);
 	}
 }
diff --git a/fs/ioprio.c b/fs/ioprio.c
index d6ff77e..e4e01bc 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -78,6 +78,10 @@
 			if (!capable(CAP_SYS_ADMIN))
 				return -EPERM;
 			break;
+		case IOPRIO_CLASS_NONE:
+			if (data)
+				return -EINVAL;
+			break;
 		default:
 			return -EINVAL;
 	}
diff --git a/fs/jfs/ioctl.c b/fs/jfs/ioctl.c
index 3c8663b..dfda12a 100644
--- a/fs/jfs/ioctl.c
+++ b/fs/jfs/ioctl.c
@@ -79,6 +79,9 @@
 		if (!S_ISDIR(inode->i_mode))
 			flags &= ~JFS_DIRSYNC_FL;
 
+		/* Is it quota file? Do not allow user to mess with it */
+		if (IS_NOQUOTA(inode))
+			return -EPERM;
 		jfs_get_inode_flags(jfs_inode);
 		oldflags = jfs_inode->mode2;
 
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index b617428..0e5fa11 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -41,7 +41,7 @@
 
 	fh = fh_copy(&resp->fh, &argp->fh);
 	if ((nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_NOP)))
-		RETURN_STATUS(nfserr_inval);
+		RETURN_STATUS(nfserr);
 
 	if (argp->mask & ~(NFS_ACL|NFS_ACLCNT|NFS_DFACL|NFS_DFACLCNT))
 		RETURN_STATUS(nfserr_inval);
diff --git a/fs/nfsd/nfs3acl.c b/fs/nfsd/nfs3acl.c
index 3e3f2de..b647f2f 100644
--- a/fs/nfsd/nfs3acl.c
+++ b/fs/nfsd/nfs3acl.c
@@ -37,7 +37,7 @@
 
 	fh = fh_copy(&resp->fh, &argp->fh);
 	if ((nfserr = fh_verify(rqstp, &resp->fh, 0, MAY_NOP)))
-		RETURN_STATUS(nfserr_inval);
+		RETURN_STATUS(nfserr);
 
 	if (argp->mask & ~(NFS_ACL|NFS_ACLCNT|NFS_DFACL|NFS_DFACLCNT))
 		RETURN_STATUS(nfserr_inval);
diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c
index 4f712e9..468f17a 100644
--- a/fs/nfsd/nfsfh.c
+++ b/fs/nfsd/nfsfh.c
@@ -95,6 +95,22 @@
 	return 0;
 }
 
+static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp,
+					  struct svc_export *exp)
+{
+	/* Check if the request originated from a secure port. */
+	if (!rqstp->rq_secure && EX_SECURE(exp)) {
+		char buf[RPC_MAX_ADDRBUFLEN];
+		dprintk(KERN_WARNING
+		       "nfsd: request from insecure port %s!\n",
+		       svc_print_addr(rqstp, buf, sizeof(buf)));
+		return nfserr_perm;
+	}
+
+	/* Set user creds for this exportpoint */
+	return nfserrno(nfsd_setuser(rqstp, exp));
+}
+
 /*
  * Perform sanity checks on the dentry in a client's file handle.
  *
@@ -167,18 +183,7 @@
 			goto out;
 		}
 
-		/* Check if the request originated from a secure port. */
-		error = nfserr_perm;
-		if (!rqstp->rq_secure && EX_SECURE(exp)) {
-			char buf[RPC_MAX_ADDRBUFLEN];
-			printk(KERN_WARNING
-			       "nfsd: request from insecure port %s!\n",
-			       svc_print_addr(rqstp, buf, sizeof(buf)));
-			goto out;
-		}
-
-		/* Set user creds for this exportpoint */
-		error = nfserrno(nfsd_setuser(rqstp, exp));
+		error = nfsd_setuser_and_check_port(rqstp, exp);
 		if (error)
 			goto out;
 
@@ -227,18 +232,22 @@
 		fhp->fh_export = exp;
 		nfsd_nr_verified++;
 	} else {
-		/* just rechecking permissions
-		 * (e.g. nfsproc_create calls fh_verify, then nfsd_create does as well)
+		/*
+		 * just rechecking permissions
+		 * (e.g. nfsproc_create calls fh_verify, then nfsd_create
+		 * does as well)
 		 */
 		dprintk("nfsd: fh_verify - just checking\n");
 		dentry = fhp->fh_dentry;
 		exp = fhp->fh_export;
-		/* Set user creds for this exportpoint; necessary even
+		/*
+		 * Set user creds for this exportpoint; necessary even
 		 * in the "just checking" case because this may be a
 		 * filehandle that was created by fh_compose, and that
 		 * is about to be used in another nfsv4 compound
-		 * operation */
-		error = nfserrno(nfsd_setuser(rqstp, exp));
+		 * operation.
+		 */
+		error = nfsd_setuser_and_check_port(rqstp, exp);
 		if (error)
 			goto out;
 	}
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 4ba7f0b..ce62c15 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -3946,7 +3946,7 @@
 	struct ocfs2_merge_ctxt ctxt;
 	struct ocfs2_extent_list *rightmost_el;
 
-	if (!rec->e_flags & OCFS2_EXT_UNWRITTEN) {
+	if (!(rec->e_flags & OCFS2_EXT_UNWRITTEN)) {
 		ret = -EIO;
 		mlog_errno(ret);
 		goto out;
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index c69c1b3..556e34c 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -729,6 +729,27 @@
 }
 
 /*
+ * Nonsparse file systems fully allocate before we get to the write
+ * code. This prevents ocfs2_write() from tagging the write as an
+ * allocating one, which means ocfs2_map_page_blocks() might try to
+ * read-in the blocks at the tail of our file. Avoid reading them by
+ * testing i_size against each block offset.
+ */
+static int ocfs2_should_read_blk(struct inode *inode, struct page *page,
+				 unsigned int block_start)
+{
+	u64 offset = page_offset(page) + block_start;
+
+	if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+		return 1;
+
+	if (i_size_read(inode) > offset)
+		return 1;
+
+	return 0;
+}
+
+/*
  * Some of this taken from block_prepare_write(). We already have our
  * mapping by now though, and the entire write will be allocating or
  * it won't, so not much need to use BH_New.
@@ -781,6 +802,7 @@
 				set_buffer_uptodate(bh);
 		} else if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
 			   !buffer_new(bh) &&
+			   ocfs2_should_read_blk(inode, page, block_start) &&
 			   (block_start < from || block_end > to)) {
 			ll_rw_block(READ, 1, &bh);
 			*wait_bh++=bh;
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 9cc7c04..f02ccb3 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -267,7 +267,7 @@
 		current_page = cs / spp;
 		page = reg->hr_slot_data[current_page];
 
-		vec_len = min(PAGE_CACHE_SIZE,
+		vec_len = min(PAGE_CACHE_SIZE - vec_start,
 			      (max_slots-cs) * (PAGE_CACHE_SIZE/spp) );
 
 		mlog(ML_HB_BIO, "page %d, vec_len = %u, vec_start = %u\n",
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 685c180..d84bd15 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -58,6 +58,7 @@
 #include <linux/slab.h>
 #include <linux/idr.h>
 #include <linux/kref.h>
+#include <linux/net.h>
 #include <net/tcp.h>
 
 #include <asm/uaccess.h>
@@ -616,8 +617,7 @@
 		del_timer_sync(&sc->sc_idle_timeout);
 		o2net_sc_cancel_delayed_work(sc, &sc->sc_keepalive_work);
 		sc_put(sc);
-		sc->sc_sock->ops->shutdown(sc->sc_sock,
-					   RCV_SHUTDOWN|SEND_SHUTDOWN);
+		kernel_sock_shutdown(sc->sc_sock, SHUT_RDWR);
 	}
 
 	/* not fatal so failed connects before the other guy has our
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 3094ddb..1957a5e 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -318,9 +318,9 @@
 static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb,
 				   struct ocfs2_dentry_lock *dl)
 {
+	iput(dl->dl_inode);
 	ocfs2_simple_drop_lockres(osb, &dl->dl_lockres);
 	ocfs2_lock_res_free(&dl->dl_lockres);
-	iput(dl->dl_inode);
 	kfree(dl);
 }
 
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 6a2f143..63b28fd 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -208,9 +208,9 @@
 	return NULL;
 }
 
-struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen,
-					struct inode *dir,
-					struct ocfs2_dir_entry **res_dir)
+static struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen,
+					       struct inode *dir,
+					       struct ocfs2_dir_entry **res_dir)
 {
 	struct super_block *sb;
 	struct buffer_head *bh_use[NAMEI_RA_SIZE];
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 41c76ff..4e97dcc 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -670,7 +670,7 @@
 {
 	mlog_entry_void();
 
-	BUG_ON((!lockres->l_flags & OCFS2_LOCK_BUSY));
+	BUG_ON((!(lockres->l_flags & OCFS2_LOCK_BUSY)));
 	BUG_ON(lockres->l_flags & OCFS2_LOCK_ATTACHED);
 
 	if (lockres->l_requested > LKM_NLMODE &&
@@ -980,18 +980,6 @@
 		goto unlock;
 	}
 
-	if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) {
-		/* lock has not been created yet. */
-		spin_unlock_irqrestore(&lockres->l_lock, flags);
-
-		ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0);
-		if (ret < 0) {
-			mlog_errno(ret);
-			goto out;
-		}
-		goto again;
-	}
-
 	if (lockres->l_flags & OCFS2_LOCK_BLOCKED &&
 	    !ocfs2_may_continue_on_blocked_lock(lockres, level)) {
 		/* is the lock is currently blocked on behalf of
@@ -1006,7 +994,14 @@
 			mlog(ML_ERROR, "lockres %s has action %u pending\n",
 			     lockres->l_name, lockres->l_action);
 
-		lockres->l_action = OCFS2_AST_CONVERT;
+		if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) {
+			lockres->l_action = OCFS2_AST_ATTACH;
+			lkm_flags &= ~LKM_CONVERT;
+		} else {
+			lockres->l_action = OCFS2_AST_CONVERT;
+			lkm_flags |= LKM_CONVERT;
+		}
+
 		lockres->l_requested = level;
 		lockres_or_flags(lockres, OCFS2_LOCK_BUSY);
 		spin_unlock_irqrestore(&lockres->l_lock, flags);
@@ -1021,7 +1016,7 @@
 		status = dlmlock(osb->dlm,
 				 level,
 				 &lockres->l_lksb,
-				 lkm_flags|LKM_CONVERT,
+				 lkm_flags,
 				 lockres->l_name,
 				 OCFS2_LOCK_ID_MAX_LEN - 1,
 				 ocfs2_locking_ast,
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index f92fe91..bbac7cd 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1891,9 +1891,11 @@
 	ssize_t written = 0;
 	size_t ocount;		/* original count */
 	size_t count;		/* after file limit checks */
-	loff_t *ppos = &iocb->ki_pos;
+	loff_t old_size, *ppos = &iocb->ki_pos;
+	u32 old_clusters;
 	struct file *file = iocb->ki_filp;
 	struct inode *inode = file->f_path.dentry->d_inode;
+	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 
 	mlog_entry("(0x%p, %u, '%.*s')\n", file,
 		   (unsigned int)nr_segs,
@@ -1949,6 +1951,13 @@
 		goto relock;
 	}
 
+	/*
+	 * To later detect whether a journal commit for sync writes is
+	 * necessary, we sample i_size, and cluster count here.
+	 */
+	old_size = i_size_read(inode);
+	old_clusters = OCFS2_I(inode)->ip_clusters;
+
 	/* communicate with ocfs2_dio_end_io */
 	ocfs2_iocb_set_rw_locked(iocb, rw_level);
 
@@ -1978,6 +1987,21 @@
 	/* buffered aio wouldn't have proper lock coverage today */
 	BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
 
+	if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) {
+		/*
+		 * The generic write paths have handled getting data
+		 * to disk, but since we don't make use of the dirty
+		 * inode list, a manual journal commit is necessary
+		 * here.
+		 */
+		if (old_size != i_size_read(inode) ||
+		    old_clusters != OCFS2_I(inode)->ip_clusters) {
+			ret = journal_force_commit(osb->journal->j_journal);
+			if (ret < 0)
+				written = ret;
+		}
+	}
+
 	/* 
 	 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
 	 * function pointer which is called when o_direct io completes so that
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 7292590..989ac27 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1105,9 +1105,16 @@
 		goto bail;
 	}
 
-	if (!new_de && new_inode)
-		mlog(ML_ERROR, "inode %lu does not exist in it's parent "
-		     "directory!", new_inode->i_ino);
+	if (!new_de && new_inode) {
+		/*
+		 * Target was unlinked by another node while we were
+		 * waiting to get to ocfs2_rename(). There isn't
+		 * anything we can do here to help the situation, so
+		 * bubble up the appropriate error.
+		 */
+		status = -ENOENT;
+		goto bail;
+	}
 
 	/* In case we need to overwrite an existing file, we blow it
 	 * away first */
diff --git a/fs/open.c b/fs/open.c
index 3b69c53..4932b4d 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1061,7 +1061,7 @@
 	prevent_tail_call(ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(sys_open);
+EXPORT_UNUSED_SYMBOL_GPL(sys_open); /* To be deleted for 2.6.25 */
 
 asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
 			   int mode)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index aeaf0d0..a17c268 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2328,21 +2328,18 @@
 
 void proc_flush_task(struct task_struct *task)
 {
-	int i, leader;
-	struct pid *pid, *tgid;
+	int i;
+	struct pid *pid, *tgid = NULL;
 	struct upid *upid;
 
-	leader = thread_group_leader(task);
-	proc_flush_task_mnt(proc_mnt, task->pid, leader ? task->tgid : 0);
 	pid = task_pid(task);
-	if (pid->level == 0)
-		return;
+	if (thread_group_leader(task))
+		tgid = task_tgid(task);
 
-	tgid = task_tgid(task);
-	for (i = 1; i <= pid->level; i++) {
+	for (i = 0; i <= pid->level; i++) {
 		upid = &pid->numbers[i];
 		proc_flush_task_mnt(upid->ns->proc_mnt, upid->nr,
-				leader ? 0 : tgid->numbers[i].nr);
+			tgid ? tgid->numbers[i].nr : 0);
 	}
 
 	upid = &pid->numbers[pid->level];
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 1bdb624..a9806bc 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -561,28 +561,33 @@
 static void proc_kill_inodes(struct proc_dir_entry *de)
 {
 	struct list_head *p;
-	struct super_block *sb = proc_mnt->mnt_sb;
+	struct super_block *sb;
 
 	/*
 	 * Actually it's a partial revoke().
 	 */
-	file_list_lock();
-	list_for_each(p, &sb->s_files) {
-		struct file * filp = list_entry(p, struct file, f_u.fu_list);
-		struct dentry * dentry = filp->f_path.dentry;
-		struct inode * inode;
-		const struct file_operations *fops;
+	spin_lock(&sb_lock);
+	list_for_each_entry(sb, &proc_fs_type.fs_supers, s_instances) {
+		file_list_lock();
+		list_for_each(p, &sb->s_files) {
+			struct file *filp = list_entry(p, struct file,
+							f_u.fu_list);
+			struct dentry *dentry = filp->f_path.dentry;
+			struct inode *inode;
+			const struct file_operations *fops;
 
-		if (dentry->d_op != &proc_dentry_operations)
-			continue;
-		inode = dentry->d_inode;
-		if (PDE(inode) != de)
-			continue;
-		fops = filp->f_op;
-		filp->f_op = NULL;
-		fops_put(fops);
+			if (dentry->d_op != &proc_dentry_operations)
+				continue;
+			inode = dentry->d_inode;
+			if (PDE(inode) != de)
+				continue;
+			fops = filp->f_op;
+			filp->f_op = NULL;
+			fops_put(fops);
+		}
+		file_list_unlock();
 	}
-	file_list_unlock();
+	spin_unlock(&sb_lock);
 }
 
 static struct proc_dir_entry *proc_create(struct proc_dir_entry **parent,
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 1820eb2..1b2b6c6 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -78,3 +78,5 @@
 {
 	return PROC_I(inode)->fd;
 }
+
+extern struct file_system_type proc_fs_type;
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index 749def0..131f9c6 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -26,13 +26,6 @@
 #include "internal.h"
 
 
-struct proc_dir_entry *proc_net_create(struct net *net,
-	const char *name, mode_t mode, get_info_t *get_info)
-{
-	return create_proc_info_entry(name,mode, net->proc_net, get_info);
-}
-EXPORT_SYMBOL_GPL(proc_net_create);
-
 struct proc_dir_entry *proc_net_fops_create(struct net *net,
 	const char *name, mode_t mode, const struct file_operations *fops)
 {
@@ -185,7 +178,7 @@
 	kfree(net->proc_net_root);
 }
 
-static struct pernet_operations proc_net_ns_ops = {
+static struct pernet_operations __net_initdata proc_net_ns_ops = {
 	.init = proc_net_ns_init,
 	.exit = proc_net_ns_exit,
 };
diff --git a/fs/proc/root.c b/fs/proc/root.c
index ec9cb3b..1f86bb8 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -98,7 +98,7 @@
 	put_pid_ns(ns);
 }
 
-static struct file_system_type proc_fs_type = {
+struct file_system_type proc_fs_type = {
 	.name		= "proc",
 	.get_sb		= proc_get_sb,
 	.kill_sb	= proc_kill_sb,
diff --git a/fs/read_write.c b/fs/read_write.c
index 124693e..ea1f94c 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -370,7 +370,7 @@
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(sys_read);
+EXPORT_UNUSED_SYMBOL_GPL(sys_read); /* to be deleted for 2.6.25 */
 
 asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t count)
 {
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index c438a8f..e0f0f09 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -57,6 +57,9 @@
 			if (get_user(flags, (int __user *)arg))
 				return -EFAULT;
 
+			/* Is it quota file? Do not allow user to mess with it. */
+			if (IS_NOQUOTA(inode))
+				return -EPERM;
 			if (((flags ^ REISERFS_I(inode)->
 			      i_attrs) & (REISERFS_IMMUTABLE_FL |
 					  REISERFS_APPEND_FL))
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index ca41567..d2db241 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -1458,9 +1458,6 @@
 				}
 				bh = next;
 			} while (bh != head);
-			if (PAGE_SIZE == bh->b_size) {
-				cancel_dirty_page(page, PAGE_CACHE_SIZE);
-			}
 		}
 	}
 }
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index f5d14ce..efbe29a 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -234,7 +234,7 @@
 
 	VERBOSE("before read, size=%ld, flags=%x, atime=%ld\n",
 		(long)dentry->d_inode->i_size,
-		dentry->d_inode->i_flags, dentry->d_inode->i_atime);
+		dentry->d_inode->i_flags, dentry->d_inode->i_atime.tv_sec);
 
 	status = generic_file_aio_read(iocb, iov, nr_segs, pos);
 out:
@@ -269,7 +269,7 @@
 	struct dentry *dentry = file->f_path.dentry;
 	ssize_t status;
 
-	VERBOSE("file %s/%s, pos=%Ld, count=%d\n",
+	VERBOSE("file %s/%s, pos=%Ld, count=%lu\n",
 		DENTRY_PATH(dentry), *ppos, count);
 
 	status = smb_revalidate_inode(dentry);
@@ -363,7 +363,8 @@
 		result = generic_file_aio_write(iocb, iov, nr_segs, pos);
 		VERBOSE("pos=%ld, size=%ld, mtime=%ld, atime=%ld\n",
 			(long) file->f_pos, (long) dentry->d_inode->i_size,
-			dentry->d_inode->i_mtime, dentry->d_inode->i_atime);
+			dentry->d_inode->i_mtime.tv_sec,
+			dentry->d_inode->i_atime.tv_sec);
 	}
 out:
 	return result;
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index ab51775..9416ead 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -536,7 +536,7 @@
 
 	/* Allocate the global temp buffer and some superblock helper structs */
 	/* FIXME: move these to the smb_sb_info struct */
-	VERBOSE("alloc chunk = %d\n", sizeof(struct smb_ops) +
+	VERBOSE("alloc chunk = %lu\n", sizeof(struct smb_ops) +
 		sizeof(struct smb_mount_data_kernel));
 	mem = kmalloc(sizeof(struct smb_ops) +
 		      sizeof(struct smb_mount_data_kernel), GFP_KERNEL);
diff --git a/fs/smbfs/proc.c b/fs/smbfs/proc.c
index feac460..d517a27 100644
--- a/fs/smbfs/proc.c
+++ b/fs/smbfs/proc.c
@@ -2593,7 +2593,7 @@
 	fattr->f_mtime.tv_sec = date_dos2unix(server, date, time);
 	fattr->f_mtime.tv_nsec = 0;
 	VERBOSE("name=%s, date=%x, time=%x, mtime=%ld\n",
-		mask, date, time, fattr->f_mtime);
+		mask, date, time, fattr->f_mtime.tv_sec);
 	fattr->f_size = DVAL(req->rq_data, 12);
 	/* ULONG allocation size */
 	fattr->attr = WVAL(req->rq_data, 20);
diff --git a/fs/smbfs/smbiod.c b/fs/smbfs/smbiod.c
index 283c572..fae8e85 100644
--- a/fs/smbfs/smbiod.c
+++ b/fs/smbfs/smbiod.c
@@ -227,7 +227,7 @@
 		printk(KERN_ERR "smb_retry: signal failed [%d]\n", result);
 		goto out;
 	}
-	VERBOSE("signalled pid %d\n", pid);
+	VERBOSE("signalled pid %d\n", pid_nr(pid));
 
 	/* FIXME: The retried requests should perhaps get a "time boost". */
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 26d79f6..76411b1 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -78,7 +78,6 @@
 struct acpi_processor_power {
 	struct cpuidle_device dev;
 	struct acpi_processor_cx *state;
-	struct acpi_processor_cx *bm_state;
 	unsigned long bm_check_timestamp;
 	u32 default_state;
 	u32 bm_activity;
diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h
index fb90b42..ede377e 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/include/asm-arm/hardware/iop3xx.h
@@ -231,7 +231,7 @@
 					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
 #define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
 					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) addr -\
+#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
 					IOP3XX_PCI_LOWER_IO_PA) +\
 					IOP3XX_PCI_LOWER_IO_VA)
 
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index d2e8171..5e01824 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -249,7 +249,7 @@
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
 #define set_pte_at(mm,addr,ptep,pteval) do { \
-	set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \
+	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
  } while (0)
 
 /*
diff --git a/include/asm-arm26/irq_regs.h b/include/asm-arm26/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/include/asm-arm26/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
index c02bc83..dd21182 100644
--- a/include/asm-avr32/sysreg.h
+++ b/include/asm-avr32/sysreg.h
@@ -215,6 +215,8 @@
 #define SYSREG_IRP_SIZE				6
 
 /* Bitfields in PCCR */
+#define SYSREG_PCCR_E_OFFSET			0
+#define SYSREG_PCCR_E_SIZE			1
 #define SYSREG_PCCR_R_OFFSET			1
 #define SYSREG_PCCR_R_SIZE			1
 #define SYSREG_PCCR_C_OFFSET			2
diff --git a/include/asm-cris/atomic.h b/include/asm-cris/atomic.h
index 0b51a87..2949a94 100644
--- a/include/asm-cris/atomic.h
+++ b/include/asm-cris/atomic.h
@@ -3,6 +3,8 @@
 #ifndef __ASM_CRIS_ATOMIC__
 #define __ASM_CRIS_ATOMIC__
 
+#include <linux/compiler.h>
+
 #include <asm/system.h>
 #include <asm/arch/atomic.h>
 
diff --git a/include/asm-cris/checksum.h b/include/asm-cris/checksum.h
index 180dbf2..c6c5be6 100644
--- a/include/asm-cris/checksum.h
+++ b/include/asm-cris/checksum.h
@@ -62,7 +62,7 @@
  * returns a 16-bit checksum, already complemented
  */
 
-static inline __sum16 int csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 						   unsigned short len,
 						   unsigned short proto,
 						   __wsum sum)
diff --git a/include/asm-cris/ethernet.h b/include/asm-cris/ethernet.h
index 30da58a..4d58652 100644
--- a/include/asm-cris/ethernet.h
+++ b/include/asm-cris/ethernet.h
@@ -15,4 +15,7 @@
 #define SET_ETH_DUPLEX_AUTO     SIOCDEVPRIVATE+3        /* Auto neg duplex */
 #define SET_ETH_DUPLEX_HALF     SIOCDEVPRIVATE+4        /* Full duplex */
 #define SET_ETH_DUPLEX_FULL     SIOCDEVPRIVATE+5        /* Half duplex */
+#define SET_ETH_ENABLE_LEDS     SIOCDEVPRIVATE+6        /* Enable net LEDs */
+#define SET_ETH_DISABLE_LEDS    SIOCDEVPRIVATE+7        /* Disable net LEDs */
+#define SET_ETH_AUTONEG         SIOCDEVPRIVATE+8
 #endif /* _CRIS_ETHERNET_H */
diff --git a/include/asm-cris/fasttimer.h b/include/asm-cris/fasttimer.h
index a3a7713..8f8a8d6 100644
--- a/include/asm-cris/fasttimer.h
+++ b/include/asm-cris/fasttimer.h
@@ -1,9 +1,8 @@
-/* $Id: fasttimer.h,v 1.3 2004/05/14 10:19:19 starvik Exp $
+/*
  * linux/include/asm-cris/fasttimer.h
  *
  * Fast timers for ETRAX100LX
- * This may be useful in other OS than Linux so use 2 space indentation...
- * Copyright (C) 2000, 2002 Axis Communications AB
+ * Copyright (C) 2000-2007 Axis Communications AB
  */
 #include <linux/time.h> /* struct timeval */
 #include <linux/timex.h>
@@ -12,11 +11,16 @@
 
 typedef void fast_timer_function_type(unsigned long);
 
+struct fasttime_t {
+	unsigned long tv_jiff;  /* jiffies */
+	unsigned long tv_usec;  /* microseconds */
+};
+
 struct fast_timer{ /* Close to timer_list */
   struct fast_timer *next;
   struct fast_timer *prev;
-  struct timeval tv_set;
-  struct timeval tv_expires;
+	struct fasttime_t tv_set;
+	struct fasttime_t tv_expires;
   unsigned long delay_us;
   fast_timer_function_type *function;
   unsigned long data;
@@ -38,6 +42,6 @@
 void schedule_usleep(unsigned long us);
 
 
-void fast_timer_init(void);
+int fast_timer_init(void);
 
 #endif
diff --git a/include/asm-cris/hardirq.h b/include/asm-cris/hardirq.h
index 1c13dd3..74178ad 100644
--- a/include/asm-cris/hardirq.h
+++ b/include/asm-cris/hardirq.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_HARDIRQ_H
 #define __ASM_HARDIRQ_H
 
+#include <asm/irq.h>
 #include <linux/threads.h>
 #include <linux/cache.h>
 
diff --git a/include/asm-cris/posix_types.h b/include/asm-cris/posix_types.h
index 92000d0..3a5e4c4 100644
--- a/include/asm-cris/posix_types.h
+++ b/include/asm-cris/posix_types.h
@@ -52,7 +52,6 @@
 } __kernel_fsid_t;
 
 #ifdef __KERNEL__
-#include <linux/bitops.h>
 
 #undef	__FD_SET
 #define __FD_SET(fd,fdsetp) set_bit(fd, (void *)(fdsetp))
diff --git a/include/asm-cris/termbits.h b/include/asm-cris/termbits.h
index 71c1b36..66e1a74 100644
--- a/include/asm-cris/termbits.h
+++ b/include/asm-cris/termbits.h
@@ -171,6 +171,19 @@
 #define  B115200 0010002
 #define  B230400 0010003
 #define  B460800 0010004
+
+/* Unsupported rates, but needed to avoid compile error. */
+#define   B500000 0010005
+#define   B576000 0010006
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+
 /* etrax supports these additional three baud rates */
 #define  B921600   0010005
 #define  B1843200  0010006
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index fde39f6..784668a 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -32,6 +32,7 @@
 	unsigned long		flags;		/* low level flags */
 	__u32			cpu;		/* current CPU */
 	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u32			tls;		/* TLS for this thread */
 
 	mm_segment_t		addr_limit;	/* thread address space:
 					 	   0-0xBFFFFFFF for user-thead
@@ -79,14 +80,18 @@
  * - other flags in MSW
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
diff --git a/include/asm-cris/tlb.h b/include/asm-cris/tlb.h
index 6cc26de..7724246 100644
--- a/include/asm-cris/tlb.h
+++ b/include/asm-cris/tlb.h
@@ -1,6 +1,8 @@
 #ifndef _CRIS_TLB_H
 #define _CRIS_TLB_H
 
+#include <linux/pagemap.h>
+
 #include <asm/arch/tlb.h>
 
 /*
diff --git a/include/asm-cris/unistd.h b/include/asm-cris/unistd.h
index 7c90fa9..6f2d924 100644
--- a/include/asm-cris/unistd.h
+++ b/include/asm-cris/unistd.h
@@ -255,6 +255,7 @@
 #define __NR_io_submit		248
 #define __NR_io_cancel		249
 #define __NR_fadvise64		250
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
 #define __NR_exit_group		252
 #define __NR_lookup_dcookie	253
 #define __NR_epoll_create	254
@@ -292,10 +293,46 @@
 #define __NR_add_key		286
 #define __NR_request_key	287
 #define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd		322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 289
+#define NR_syscalls 325
 
 #include <asm/arch/unistd.h>
 
diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h
index 8fefd6b..3a66ebd 100644
--- a/include/asm-frv/irq.h
+++ b/include/asm-frv/irq.h
@@ -12,9 +12,6 @@
 #ifndef _ASM_IRQ_H_
 #define _ASM_IRQ_H_
 
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ				(-1)
-
 #define NR_IRQS				48
 #define IRQ_BASE_CPU			(0 * 16)
 #define IRQ_BASE_FPGA			(1 * 16)
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
index abfcb3a..8a695d3 100644
--- a/include/asm-ia64/pal.h
+++ b/include/asm-ia64/pal.h
@@ -1379,10 +1379,11 @@
 static inline s64
 ia64_pal_proc_get_features (u64 *features_avail,
 			    u64 *features_status,
-			    u64 *features_control)
+			    u64 *features_control,
+			    u64 features_set)
 {
 	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, 0, 0);
+	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0);
 	if (iprv.status == 0) {
 		*features_avail   = iprv.v0;
 		*features_status  = iprv.v1;
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
index eb1b566..27c2f9b 100644
--- a/include/asm-m68knommu/unistd.h
+++ b/include/asm-m68knommu/unistd.h
@@ -185,8 +185,8 @@
 #define __NR_rt_sigtimedwait	177
 #define __NR_rt_sigqueueinfo	178
 #define __NR_rt_sigsuspend	179
-#define __NR_pread		180
-#define __NR_pwrite		181
+#define __NR_pread64		180
+#define __NR_pwrite64		181
 #define __NR_lchown		182
 #define __NR_getcwd		183
 #define __NR_capget		184
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 94f1c81..ed5c02c 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -54,6 +54,7 @@
 	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
 	struct cache_desc	scache;	/* Secondary cache */
 	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
+	int			srsets;	/* Shadow register sets */
 #if defined(CONFIG_MIPS_MT_SMTC)
 	/*
 	 * In the MIPS MT "SMTC" model, each TC is considered
diff --git a/include/asm-mips/lasat/lasatint.h b/include/asm-mips/lasat/lasatint.h
index 581dc45..e0d2458 100644
--- a/include/asm-mips/lasat/lasatint.h
+++ b/include/asm-mips/lasat/lasatint.h
@@ -1,11 +1,6 @@
 #ifndef __ASM_LASAT_LASATINT_H
 #define __ASM_LASAT_LASATINT_H
 
-#include <linux/irq.h>
-
-#define LASATINT_BASE	MIPS_CPU_IRQ_BASE
-#define LASATINT_END	(LASATINT_BASE + 16)
-
 /* lasat 100 */
 #define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
 #define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
diff --git a/include/asm-mips/mach-lasat/irq.h b/include/asm-mips/mach-lasat/irq.h
new file mode 100644
index 0000000..da75f89
--- /dev/null
+++ b/include/asm-mips/mach-lasat/irq.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MACH_LASAT_IRQ_H
+#define _ASM_MACH_LASAT_IRQ_H
+
+#define LASAT_CASCADE_IRQ	(MIPS_CPU_IRQ_BASE + 0)
+
+#define LASAT_IRQ_BASE		8
+#define LASAT_IRQ_END		23
+
+#define NR_IRQS			24
+
+#include_next <irq.h>
+
+#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h
index 5816ad1..6529704 100644
--- a/include/asm-mips/timex.h
+++ b/include/asm-mips/timex.h
@@ -35,7 +35,7 @@
 
 static inline cycles_t get_cycles(void)
 {
-	return read_c0_count();
+	return 0;
 }
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 0307c84..a2328b8 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -91,7 +91,7 @@
 extern int  m8xx_cpm_hostfree(uint start);
 extern void m8xx_cpm_hostdump(void);
 
-extern void cpm_load_patch(volatile immap_t *immr);
+extern void cpm_load_patch(cpm8xx_t *cp);
 
 /* Buffer descriptors used by many of the CPM protocols.
 */
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 9d74338..4525c78 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -138,6 +138,7 @@
 #define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
 #define CPU_FTR_UNIFIED_ID_CACHE	ASM_CONST(0x0000000001000000)
 #define CPU_FTR_SPE			ASM_CONST(0x0000000002000000)
+#define CPU_FTR_NEED_PAIRED_STWCX	ASM_CONST(0x0000000004000000)
 
 /*
  * Add the 64-bit processor unique features in the top half of the word;
@@ -261,25 +262,25 @@
 #define CPU_FTRS_7450_20	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7450_21	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7450_23	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
 #define CPU_FTRS_7455_1	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
 	    CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
 	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
 #define CPU_FTRS_7455_20	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
@@ -289,31 +290,32 @@
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7447_10	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
+	    CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7447	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7447A	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_7448	(CPU_FTR_COMMON | \
 	    CPU_FTR_USE_TB | \
 	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
 	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_PPC_LE)
+	    CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
 #define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
 	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
 #define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 86a54a4a..fea2d8f 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -11,6 +11,11 @@
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
 extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -562,6 +567,10 @@
 	: "=&r" (old), "=&r" (tmp), "=m" (*p)
 	: "r" (p), "r" (clr), "r" (set), "m" (*p)
 	: "cc" );
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
 	return old;
 }
 #else
@@ -582,6 +591,10 @@
 	: "=&r" (old), "=&r" (tmp), "=m" (*p)
 	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
 	: "cc" );
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
 	return old;
 }
 #endif
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index cc6d872..11d5383 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -308,8 +308,8 @@
 SYSCALL_SPU(getcpu)
 COMPAT_SYS(epoll_pwait)
 COMPAT_SYS_SPU(utimensat)
-COMPAT_SYS(fallocate)
 COMPAT_SYS_SPU(signalfd)
 COMPAT_SYS_SPU(timerfd)
 SYSCALL_SPU(eventfd)
 COMPAT_SYS_SPU(sync_file_range2)
+COMPAT_SYS(fallocate)
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index f058955..780f826 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -176,25 +176,31 @@
 #endif
 }
 
+/*
+ * Note: Book E and 4xx processors differ from other PowerPC processors
+ * in when the decrementer generates its interrupt: on the 1 to 0
+ * transition for Book E/4xx, but on the 0 to -1 transition for others.
+ */
 static inline void set_dec(int val)
 {
 #if defined(CONFIG_40x)
 	mtspr(SPRN_PIT, val);
 #elif defined(CONFIG_8xx_CPU6)
-	set_dec_cpu6(val);
+	set_dec_cpu6(val - 1);
 #else
+#ifndef CONFIG_BOOKE
+	--val;
+#endif
 #ifdef CONFIG_PPC_ISERIES
-	int cur_dec;
-
 	if (firmware_has_feature(FW_FEATURE_ISERIES) &&
 			get_lppaca()->shared_proc) {
 		get_lppaca()->virtual_decr = val;
-		cur_dec = get_dec();
-		if (cur_dec > val)
+		if (get_dec() > val)
 			HvCall_setVirtualDecr();
-	} else
+		return;
+	}
 #endif
-		mtspr(SPRN_DEC, val);
+	mtspr(SPRN_DEC, val);
 #endif /* not 40x or 8xx_CPU6 */
 }
 
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
index b6b036c..5c91081 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/include/asm-powerpc/tlbflush.h
@@ -1,5 +1,6 @@
 #ifndef _ASM_POWERPC_TLBFLUSH_H
 #define _ASM_POWERPC_TLBFLUSH_H
+
 /*
  * TLB flushing:
  *
@@ -16,9 +17,6 @@
  */
 #ifdef __KERNEL__
 
-struct mm_struct;
-struct vm_area_struct;
-
 #if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
 /*
  * TLB flushing for software loaded TLB chips
@@ -28,7 +26,9 @@
  * specific tlbie's
  */
 
-extern void _tlbie(unsigned long address);
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
 
 #if defined(CONFIG_40x) || defined(CONFIG_8xx)
 #define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
@@ -44,13 +44,13 @@
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 				  unsigned long vmaddr)
 {
-	_tlbie(vmaddr);
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
 }
 
 static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
 					 unsigned long vmaddr)
 {
-	_tlbie(vmaddr);
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
 }
 
 static inline void flush_tlb_range(struct vm_area_struct *vma,
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
index aa558da..b912461 100644
--- a/include/asm-sh/cacheflush.h
+++ b/include/asm-sh/cacheflush.h
@@ -43,21 +43,31 @@
 extern void __flush_invalidate_region(void *start, int size);
 #endif
 
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
+#ifdef CONFIG_CPU_SH4
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+#else
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
 	do {							\
 		flush_cache_page(vma, vaddr, page_to_pfn(page));\
 		memcpy(dst, src, len);				\
 		flush_icache_user_range(vma, page, vaddr, len);	\
 	} while (0)
 
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
 	do {							\
 		flush_cache_page(vma, vaddr, page_to_pfn(page));\
 		memcpy(dst, src, len);				\
 	} while (0)
+#endif
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define HAVE_ARCH_UNMAPPED_AREA
 
diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h
index 3880ce0..7b795ac 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/include/asm-sh/cpu-sh3/timer.h
@@ -23,8 +23,7 @@
  * ---------------------------------------------------------------------------
  */
 
-#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
-     !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if  !defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define TMU_TOCR	0xfffffe90	/* Byte access */
 #endif
 
@@ -58,8 +57,7 @@
 #define TMU2_TCOR	0xfffffeac	/* Long access */
 #define TMU2_TCNT	0xfffffeb0	/* Long access */
 #define TMU2_TCR	0xfffffeb4	/* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720)
 #define TMU2_TCPR2	0xfffffeb8	/* Long access */
 #endif
 #endif
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index 3aa8b07..d00a8fd 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -73,10 +73,13 @@
 #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
 	(defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
 struct page;
-extern void clear_user_page(void *to, unsigned long address, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
-extern void __clear_user_page(void *to, void *orig_to);
-extern void __copy_user_page(void *to, void *from, void *orig_to);
+struct vm_area_struct;
+extern void clear_user_page(void *to, unsigned long address, struct page *page);
+#ifdef CONFIG_CPU_SH4
+extern void copy_user_highpage(struct page *to, struct page *from,
+			       unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#endif
 #else
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index 0b1d7c6..8f1e8be 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -322,7 +322,9 @@
 #define PAGE_KERNEL		__pgprot(0)
 #define PAGE_KERNEL_NOCACHE	__pgprot(0)
 #define PAGE_KERNEL_RO		__pgprot(0)
-#define PAGE_KERNEL_PCC		__pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+				__pgprot(0)
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index ab0028d..fda6848 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -49,7 +49,7 @@
 
 	/* SH-4 types */
 	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
-	CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
+	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
 
 	/* SH-4A types */
 	CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
index ed358a3..b9789c8 100644
--- a/include/asm-sh/ptrace.h
+++ b/include/asm-sh/ptrace.h
@@ -42,9 +42,6 @@
 #define REG_FPSCR	55
 #define REG_FPUL	56
 
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD     0x00000001
-
 /*
  * This struct defines the way the registers are stored on the
  * kernel stack during a system call or other kernel entry.
diff --git a/include/asm-sh/vga.h b/include/asm-sh/vga.h
new file mode 100644
index 0000000..06a5de8
--- /dev/null
+++ b/include/asm-sh/vga.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_VGA_H
+#define __ASM_SH_VGA_H
+
+/* Stupid drivers. */
+
+#endif /* __ASM_SH_VGA_H */
diff --git a/include/asm-sh64/ptrace.h b/include/asm-sh64/ptrace.h
index a6d4da5..c424f80 100644
--- a/include/asm-sh64/ptrace.h
+++ b/include/asm-sh64/ptrace.h
@@ -32,6 +32,4 @@
 extern void show_regs(struct pt_regs *);
 #endif
 
-#define PTRACE_O_TRACESYSGOOD     0x00000001
-
 #endif /* __ASM_SH64_PTRACE_H */
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
index f7417e9..d4de32f 100644
--- a/include/asm-sparc64/vio.h
+++ b/include/asm-sparc64/vio.h
@@ -8,6 +8,7 @@
 #include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/list.h>
+#include <linux/log2.h>
 
 #include <asm/ldc.h>
 #include <asm/mdesc.h>
@@ -257,8 +258,7 @@
 static inline u32 vio_dring_avail(struct vio_dring_state *dr,
 				  unsigned int ring_size)
 {
-	/* Ensure build-time power-of-2.  */
-	BUILD_BUG_ON(ring_size & (ring_size - 1));
+	BUILD_BUG_ON(!is_power_of_2(ring_size));
 
 	return (dr->pending -
 		((dr->prod - dr->cons) & (ring_size - 1)));
diff --git a/include/asm-um/pgtable-3level.h b/include/asm-um/pgtable-3level.h
index aa82b88..3ebafba 100644
--- a/include/asm-um/pgtable-3level.h
+++ b/include/asm-um/pgtable-3level.h
@@ -71,7 +71,7 @@
 
 static inline void pud_clear (pud_t *pud)
 {
-        set_pud(pud, __pud(0));
+	set_pud(pud, __pud(_PAGE_NEWPAGE));
 }
 
 #define pud_page(pud) phys_to_page(pud_val(pud) & PAGE_MASK)
diff --git a/include/asm-x86/i387_64.h b/include/asm-x86/i387_64.h
index 0217b74..3a4ffba 100644
--- a/include/asm-x86/i387_64.h
+++ b/include/asm-x86/i387_64.h
@@ -203,6 +203,11 @@
  */
 static inline int restore_i387(struct _fpstate __user *buf)
 {
+	set_used_math();
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
 	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
 }
 
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index 9c5092b..2091779 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -54,9 +54,6 @@
 }
 /*:*/
 
-void async_hcall(unsigned long call,
-		 unsigned long arg1, unsigned long arg2, unsigned long arg3);
-
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
 
diff --git a/include/asm-x86/mach-default/mach_reboot.h b/include/asm-x86/mach-default/mach_reboot.h
index e23fd9f..6adee6a 100644
--- a/include/asm-x86/mach-default/mach_reboot.h
+++ b/include/asm-x86/mach-default/mach_reboot.h
@@ -49,7 +49,7 @@
 		udelay(50);
 		kb_wait();
 		udelay(50);
-		outb(cmd | 0x04, 0x60);	/* set "System flag" */
+		outb(cmd | 0x14, 0x60); /* set "System flag" and "Keyboard Disabled" */
 		udelay(50);
 		kb_wait();
 		udelay(50);
diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h
index 8aa1054..52ee75c 100644
--- a/include/asm-x86/mach-es7000/mach_mpparse.h
+++ b/include/asm-x86/mach-es7000/mach_mpparse.h
@@ -29,9 +29,9 @@
 static inline int es7000_check_dsdt(void)
 {
 	struct acpi_table_header header;
-	memcpy(&header, 0, sizeof(struct acpi_table_header));
-	acpi_get_table_header(ACPI_SIG_DSDT, 0, &header);
-	if (!strncmp(header.oem_id, "UNISYS", 6))
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
 		return 1;
 	return 0;
 }
diff --git a/include/asm-x86/mach-voyager/setup_arch.h b/include/asm-x86/mach-voyager/setup_arch.h
index 84d01ad..71729ca 100644
--- a/include/asm-x86/mach-voyager/setup_arch.h
+++ b/include/asm-x86/mach-voyager/setup_arch.h
@@ -1,5 +1,7 @@
 #include <asm/voyager.h>
-#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40))
+#include <asm/setup.h>
+#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
+			(&boot_params.apm_bios_info))
 
 /* Hook to call BIOS initialisation function */
 
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index 213c973..51ddb25 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -60,7 +60,7 @@
 
 #define instruction_pointer(regs) ((regs)->eip)
 #define frame_pointer(regs) ((regs)->ebp)
-#define stack_pointer(regs) ((regs)->esp)
+#define stack_pointer(regs) ((unsigned long)(regs))
 #define regs_return_value(regs) ((regs)->eax)
 
 extern unsigned long profile_pc(struct pt_regs *regs);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 8ccedf7..e3c16c9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -132,6 +132,11 @@
 int acpi_register_gsi (u32 gsi, int triggering, int polarity);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
+#ifdef CONFIG_X86_IO_APIC
+extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity);
+#else
+#define acpi_get_override_irq(bus, trigger, polarity) (-1)
+#endif
 /*
  * This function undoes the effect of one call to acpi_register_gsi().
  * If this matches the last registration, any IRQ resources for gsi
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 61535e7..5c4e54a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -425,6 +425,8 @@
 {
 	if ((id[83] & 0xC000) != 0x4000)
 		return 0;
+	if (!ata_id_u64(id, 100))
+		return 0;
 	return id[83] & (1 << 10);
 }
 
@@ -535,6 +537,15 @@
 	return 1;
 }
 
+static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
+{
+	if (ata_id_is_sata(dev_id))
+		return 0;	/* SATA */
+	if ((dev_id[93] & 0x2000) == 0x2000)
+		return 0;	/* 80 wire */
+	return 1;
+}
+
 static inline int atapi_cdb_len(const u16 *dev_id)
 {
 	u16 tmp = dev_id[0] & 0x3;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8396db2..d18ee67 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -697,6 +697,7 @@
 extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
 				  struct request *, int, rq_end_io_fn *);
 extern int blk_verify_command(unsigned char *, int);
+extern void blk_unplug(struct request_queue *q);
 
 static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
 {
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h
index 0b9bfbd..d62fcee 100644
--- a/include/linux/cgroup_subsys.h
+++ b/include/linux/cgroup_subsys.h
@@ -13,12 +13,6 @@
 
 /* */
 
-#ifdef CONFIG_CGROUP_CPUACCT
-SUBSYS(cpuacct)
-#endif
-
-/* */
-
 #ifdef CONFIG_CGROUP_DEBUG
 SUBSYS(debug)
 #endif
diff --git a/include/linux/cpu_acct.h b/include/linux/cpu_acct.h
deleted file mode 100644
index 6b5fd8a..0000000
--- a/include/linux/cpu_acct.h
+++ /dev/null
@@ -1,14 +0,0 @@
-
-#ifndef _LINUX_CPU_ACCT_H
-#define _LINUX_CPU_ACCT_H
-
-#include <linux/cgroup.h>
-#include <asm/cputime.h>
-
-#ifdef CONFIG_CGROUP_CPUACCT
-extern void cpuacct_charge(struct task_struct *, cputime_t cputime);
-#else
-static void inline cpuacct_charge(struct task_struct *p, cputime_t cputime) {}
-#endif
-
-#endif
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 16a5154..c4e0016 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -92,6 +92,7 @@
 	struct kobject		kobj;
 	struct completion	kobj_unregister;
 	void			*governor_data;
+	struct cpuidle_state	*safe_state;
 };
 
 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 6413445..241c01c 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -656,6 +656,26 @@
 #define EXT3_DIR_ROUND			(EXT3_DIR_PAD - 1)
 #define EXT3_DIR_REC_LEN(name_len)	(((name_len) + 8 + EXT3_DIR_ROUND) & \
 					 ~EXT3_DIR_ROUND)
+#define EXT3_MAX_REC_LEN		((1<<16)-1)
+
+static inline unsigned ext3_rec_len_from_disk(__le16 dlen)
+{
+	unsigned len = le16_to_cpu(dlen);
+
+	if (len == EXT3_MAX_REC_LEN)
+		return 1 << 16;
+	return len;
+}
+
+static inline __le16 ext3_rec_len_to_disk(unsigned len)
+{
+	if (len == (1 << 16))
+		return cpu_to_le16(EXT3_MAX_REC_LEN);
+	else if (len > (1 << 16))
+		BUG();
+	return cpu_to_le16(len);
+}
+
 /*
  * Hash Tree Directory indexing
  * (c) Daniel Phillips, 2001
diff --git a/include/linux/f75375s.h b/include/linux/f75375s.h
new file mode 100644
index 0000000..e99e225
--- /dev/null
+++ b/include/linux/f75375s.h
@@ -0,0 +1,21 @@
+/*
+ * f75375s.h - platform data structure for f75375s sensor
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, Riku Voipio <riku.voipio@iki.fi>
+ */
+
+#ifndef __LINUX_F75375S_H
+#define __LINUX_F75375S_H
+
+/* We want to set fans spinning on systems where there is no
+ * BIOS to do that for us */
+struct f75375s_platform_data {
+	u8 pwm[2];
+	u8 pwm_enable[2];
+};
+
+#endif /* __LINUX_F75375S_H */
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 9965035..92d420f 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -149,10 +149,6 @@
 		int offset;
 	} both;
 };
-int get_futex_key(u32 __user *uaddr, struct rw_semaphore *shared,
-		  union futex_key *key);
-void get_futex_key_refs(union futex_key *key);
-void drop_futex_key_refs(union futex_key *key);
 
 #ifdef CONFIG_FUTEX
 extern void exit_robust_list(struct task_struct *curr);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index ea0f50b..2496879 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -19,7 +19,7 @@
 int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
-int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int);
+int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int);
 void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
 void __unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
 int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
@@ -106,7 +106,7 @@
 	return 0;
 }
 
-#define follow_hugetlb_page(m,v,p,vs,a,b,i)	({ BUG(); 0; })
+#define follow_hugetlb_page(m,v,p,vs,a,b,i,w)	({ BUG(); 0; })
 #define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
 #define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
 #define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
@@ -165,8 +165,10 @@
 extern const struct file_operations hugetlbfs_file_operations;
 extern struct vm_operations_struct hugetlb_vm_ops;
 struct file *hugetlb_file_setup(const char *name, size_t);
-int hugetlb_get_quota(struct address_space *mapping);
-void hugetlb_put_quota(struct address_space *mapping);
+int hugetlb_get_quota(struct address_space *mapping, long delta);
+void hugetlb_put_quota(struct address_space *mapping, long delta);
+
+#define BLOCKS_PER_HUGEPAGE	(HPAGE_SIZE / 512)
 
 static inline int is_file_hugepages(struct file *file)
 {
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 8033e6b..a100c9f 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -400,11 +400,6 @@
 extern void i2c_clients_command(struct i2c_adapter *adap,
 				unsigned int cmd, void *arg);
 
-/* returns -EBUSY if address has been taken, 0 if not. Note that the only
-   other place at which this is called is within i2c_attach_client; so
-   you can cheat by simply not registering. Not recommended, of course! */
-extern int i2c_check_addr (struct i2c_adapter *adapter, int addr);
-
 /* Detect function. It iterates over all possible addresses itself.
  * It will only call found_proc if some client is connected at the
  * specific address (unless a 'force' matched);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4ed4777..dc75ccb 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1031,14 +1031,7 @@
 extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
 
 extern void ide_fix_driveid(struct hd_driveid *);
-/*
- * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
- * removing leading/trailing blanks and compressing internal blanks.
- * It is primarily used to tidy up the model name/number fields as
- * returned by the WIN_[P]IDENTIFY commands.
- *
- * (s, bytecount, byteswap)
- */
+
 extern void ide_fixstring(u8 *, const int, const int);
 
 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index f73de6f..82de2fb 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -6,6 +6,7 @@
 #define _LINUX_KALLSYMS_H
 
 #include <linux/errno.h>
+#include <linux/stddef.h>
 
 #define KSYM_NAME_LEN 128
 #define KSYM_SYMBOL_LEN (sizeof("%s+%#lx/%#lx [%s]") + (KSYM_NAME_LEN - 1) + \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 1e27785..56a5673 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -339,6 +339,7 @@
 	ATA_HORKAGE_SKIP_PM	= (1 << 5),	/* Skip PM operations */
 	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
 	ATA_HORKAGE_IPM		= (1 << 7),	/* Link PM problems */
+	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
index 580b3f4..2f4e957 100644
--- a/include/linux/mc146818rtc.h
+++ b/include/linux/mc146818rtc.h
@@ -109,8 +109,11 @@
 #ifndef ARCH_RTC_LOCATION	/* Override by <asm/mc146818rtc.h>? */
 
 #define RTC_IO_EXTENT	0x8
+#define RTC_IO_EXTENT_USED	0x2
 #define RTC_IOMAPPED	1	/* Default to I/O mapping. */
 
+#else
+#define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
 #endif /* ARCH_RTC_LOCATION */
 
 #endif /* _MC146818RTC_H */
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 7da2cee..35a8277 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -128,6 +128,18 @@
 #ifdef __KERNEL__
 #include <net/sock.h>
 
+#ifdef CONFIG_IP_MROUTE
+static inline int ip_mroute_opt(int opt)
+{
+	return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10);
+}
+#else
+static inline int ip_mroute_opt(int opt)
+{
+	return 0;
+}
+#endif
+
 extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
 extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
 extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
diff --git a/include/linux/net.h b/include/linux/net.h
index dd79cdb..596131e 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -95,6 +95,12 @@
 
 #endif /* ARCH_HAS_SOCKET_TYPES */
 
+enum sock_shutdown_cmd {
+	SHUT_RD		= 0,
+	SHUT_WR		= 1,
+	SHUT_RDWR	= 2,
+};
+
 /**
  *  struct socket - general BSD socket
  *  @state: socket state (%SS_CONNECTED, etc)
@@ -223,6 +229,8 @@
 extern int kernel_sendpage(struct socket *sock, struct page *page, int offset,
 			   size_t size, int flags);
 extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg);
+extern int kernel_sock_shutdown(struct socket *sock,
+				enum sock_shutdown_cmd how);
 
 #ifndef CONFIG_SMP
 #define SOCKOPS_WRAPPED(name) name
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index f2eaea2..b87e83a 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -4,25 +4,28 @@
 header-y += nfnetlink_log.h
 header-y += nfnetlink_queue.h
 header-y += xt_CLASSIFY.h
+header-y += xt_CONNMARK.h
+header-y += xt_CONNSECMARK.h
+header-y += xt_DSCP.h
+header-y += xt_MARK.h
+header-y += xt_NFLOG.h
+header-y += xt_NFQUEUE.h
+header-y += xt_SECMARK.h
+header-y += xt_TCPMSS.h
 header-y += xt_comment.h
 header-y += xt_connbytes.h
 header-y += xt_connmark.h
-header-y += xt_CONNMARK.h
 header-y += xt_conntrack.h
 header-y += xt_dccp.h
 header-y += xt_dscp.h
-header-y += xt_DSCP.h
 header-y += xt_esp.h
-header-y += xt_helper.h
 header-y += xt_hashlimit.h
+header-y += xt_helper.h
 header-y += xt_length.h
 header-y += xt_limit.h
 header-y += xt_mac.h
 header-y += xt_mark.h
-header-y += xt_MARK.h
 header-y += xt_multiport.h
-header-y += xt_NFQUEUE.h
-header-y += xt_NFLOG.h
 header-y += xt_pkttype.h
 header-y += xt_policy.h
 header-y += xt_realm.h
@@ -32,9 +35,6 @@
 header-y += xt_string.h
 header-y += xt_tcpmss.h
 header-y += xt_tcpudp.h
-header-y += xt_SECMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_TCPMSS.h
 
 unifdef-y += nf_conntrack_common.h
 unifdef-y += nf_conntrack_ftp.h
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
index 7185792..3a7105b 100644
--- a/include/linux/netfilter_ipv4/Kbuild
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -1,47 +1,47 @@
-header-y += ipt_addrtype.h
-header-y += ipt_ah.h
 header-y += ipt_CLASSIFY.h
 header-y += ipt_CLUSTERIP.h
+header-y += ipt_CONNMARK.h
+header-y += ipt_DSCP.h
+header-y += ipt_ECN.h
+header-y += ipt_LOG.h
+header-y += ipt_MARK.h
+header-y += ipt_NFQUEUE.h
+header-y += ipt_REJECT.h
+header-y += ipt_SAME.h
+header-y += ipt_TCPMSS.h
+header-y += ipt_TOS.h
+header-y += ipt_TTL.h
+header-y += ipt_ULOG.h
+header-y += ipt_addrtype.h
+header-y += ipt_ah.h
 header-y += ipt_comment.h
 header-y += ipt_connbytes.h
 header-y += ipt_connmark.h
-header-y += ipt_CONNMARK.h
 header-y += ipt_conntrack.h
 header-y += ipt_dccp.h
 header-y += ipt_dscp.h
-header-y += ipt_DSCP.h
 header-y += ipt_ecn.h
-header-y += ipt_ECN.h
 header-y += ipt_esp.h
 header-y += ipt_hashlimit.h
 header-y += ipt_helper.h
 header-y += ipt_iprange.h
 header-y += ipt_length.h
 header-y += ipt_limit.h
-header-y += ipt_LOG.h
 header-y += ipt_mac.h
 header-y += ipt_mark.h
-header-y += ipt_MARK.h
 header-y += ipt_multiport.h
-header-y += ipt_NFQUEUE.h
 header-y += ipt_owner.h
 header-y += ipt_physdev.h
 header-y += ipt_pkttype.h
 header-y += ipt_policy.h
 header-y += ipt_realm.h
 header-y += ipt_recent.h
-header-y += ipt_REJECT.h
-header-y += ipt_SAME.h
 header-y += ipt_sctp.h
 header-y += ipt_state.h
 header-y += ipt_string.h
 header-y += ipt_tcpmss.h
-header-y += ipt_TCPMSS.h
 header-y += ipt_tos.h
-header-y += ipt_TOS.h
 header-y += ipt_ttl.h
-header-y += ipt_TTL.h
-header-y += ipt_ULOG.h
 
 unifdef-y += ip_queue.h
 unifdef-y += ip_tables.h
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
index 9dd978d..8887a5f 100644
--- a/include/linux/netfilter_ipv6/Kbuild
+++ b/include/linux/netfilter_ipv6/Kbuild
@@ -14,8 +14,8 @@
 header-y += ip6t_multiport.h
 header-y += ip6t_opts.h
 header-y += ip6t_owner.h
-header-y += ip6t_policy.h
 header-y += ip6t_physdev.h
+header-y += ip6t_policy.h
 header-y += ip6t_rt.h
 
 unifdef-y += ip6_tables.h
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 7c1f3b1..d5bfaba 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -192,7 +192,7 @@
 /* finegrained unicast helpers: */
 struct sock *netlink_getsockbyfilp(struct file *filp);
 int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
-		long timeo, struct sock *ssk);
+		      long *timeo, struct sock *ssk);
 void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
 int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 5d2281f..0dd93bb 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -109,6 +109,14 @@
 	pcie_hot_reset = (__force pcie_reset_state_t) 3
 };
 
+typedef unsigned short __bitwise pci_dev_flags_t;
+enum pci_dev_flags {
+	/* INTX_DISABLE in PCI_COMMAND register disables MSI
+	 * generation too.
+	 */
+	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+};
+
 typedef unsigned short __bitwise pci_bus_flags_t;
 enum pci_bus_flags {
 	PCI_BUS_FLAGS_NO_MSI   = (__force pci_bus_flags_t) 1,
@@ -185,6 +193,7 @@
 	unsigned int	msix_enabled:1;
 	unsigned int	is_managed:1;
 	unsigned int	is_pcie:1;
+	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
 	u32		saved_config_space[16]; /* config space saved at suspend time */
@@ -479,8 +488,11 @@
 
 /* Generic PCI functions exported to card drivers */
 
+#ifdef CONFIG_PCI_LEGACY
 struct pci_dev __deprecated *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
 struct pci_dev __deprecated *pci_find_slot (unsigned int bus, unsigned int devfn);
+#endif /* CONFIG_PCI_LEGACY */
+
 int pci_find_capability (struct pci_dev *dev, int cap);
 int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
 int pci_find_ext_capability (struct pci_dev *dev, int cap);
@@ -622,7 +634,6 @@
 void pci_unregister_driver(struct pci_driver *);
 void pci_remove_behind_bridge(struct pci_dev *);
 struct pci_driver *pci_dev_driver(const struct pci_dev *);
-const struct pci_device_id *pci_match_device(struct pci_driver *drv, struct pci_dev *dev);
 const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, struct pci_dev *dev);
 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass);
 
@@ -751,7 +762,6 @@
 static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
 static inline int pci_find_next_capability (struct pci_dev *dev, u8 post, int cap) { return 0; }
 static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
-static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
 
 /* Power management related routines */
 static inline int pci_save_state(struct pci_dev *dev) { return 0; }
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e44aac8c..1ee009e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -360,9 +360,6 @@
 #define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
 #define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
 #define PCI_DEVICE_ID_ATI_RS480         0x5950
-#define PCI_DEVICE_ID_ATI_RD580		0x5952
-#define PCI_DEVICE_ID_ATI_RX790		0x5957
-#define PCI_DEVICE_ID_ATI_RS690		0x7910
 /* ATI IXP Chipset */
 #define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
 #define PCI_DEVICE_ID_ATI_IXP200_SMBUS	0x4353
@@ -1436,8 +1433,8 @@
 #define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
 #define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB	0x0036
 #define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
-#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX	0x0104
 #define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE	0x0132
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
@@ -2279,6 +2276,9 @@
 #define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
 #define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
 #define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
+#define PCI_DEVICE_ID_INTEL_5000_ERR	0x25F0
+#define PCI_DEVICE_ID_INTEL_5000_FBD0	0x25F5
+#define PCI_DEVICE_ID_INTEL_5000_FBD1	0x25F6
 #define PCI_DEVICE_ID_INTEL_82945G_HB	0x2770
 #define PCI_DEVICE_ID_INTEL_82945G_IG	0x2772
 #define PCI_DEVICE_ID_INTEL_3000_HB	0x2778
@@ -2332,6 +2332,7 @@
 #define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
 #define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
 #define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
 #define PCI_DEVICE_ID_INTEL_IOAT_SCNB	0x65ff
 #define PCI_DEVICE_ID_INTEL_TOLAPAI_0	0x5031
 #define PCI_DEVICE_ID_INTEL_TOLAPAI_1	0x5032
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 0135c76..1689e28 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -29,6 +29,7 @@
 
 extern struct pid_namespace init_pid_ns;
 
+#ifdef CONFIG_PID_NS
 static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
 {
 	if (ns != &init_pid_ns)
@@ -45,6 +46,28 @@
 		kref_put(&ns->kref, free_pid_ns);
 }
 
+#else /* !CONFIG_PID_NS */
+#include <linux/err.h>
+
+static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
+{
+	return ns;
+}
+
+static inline struct pid_namespace *
+copy_pid_ns(unsigned long flags, struct pid_namespace *ns)
+{
+	if (flags & CLONE_NEWPID)
+		ns = ERR_PTR(-EINVAL);
+	return ns;
+}
+
+static inline void put_pid_ns(struct pid_namespace *ns)
+{
+}
+
+#endif /* CONFIG_PID_NS */
+
 static inline struct pid_namespace *task_active_pid_ns(struct task_struct *tsk)
 {
 	return tsk->nsproxy->pid_ns;
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 1ff4616..1273c6e 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -196,8 +196,6 @@
 	return res;
 }
 
-extern struct proc_dir_entry *proc_net_create(struct net *net,
-	const char *name, mode_t mode, get_info_t *get_info);
 extern struct proc_dir_entry *proc_net_fops_create(struct net *net,
 	const char *name, mode_t mode, const struct file_operations *fops);
 extern void proc_net_remove(struct net *net, const char *name);
@@ -208,7 +206,6 @@
 #define proc_bus NULL
 
 #define proc_net_fops_create(net, name, mode, fops)  ({ (void)(mode), NULL; })
-#define proc_net_create(net, name, mode, info)	({ (void)(mode), NULL; })
 static inline void proc_net_remove(struct net *net, const char *name) {}
 
 static inline void proc_flush_task(struct task_struct *task)
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 5bf6182..4e81836 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -491,9 +491,11 @@
 	unsigned char	nduseropt_family;
 	unsigned char	nduseropt_pad1;
 	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	int		nduseropt_ifindex;
 	__u8		nduseropt_icmp_type;
 	__u8		nduseropt_icmp_code;
 	unsigned short	nduseropt_pad2;
+	unsigned int	nduseropt_pad3;
 	/* Followed by one or more ND options */
 };
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 155d743..ee800e7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -254,6 +254,7 @@
 
 extern void cpu_init (void);
 extern void trap_init(void);
+extern void account_process_tick(struct task_struct *task, int user);
 extern void update_process_times(int user);
 extern void scheduler_tick(void);
 
@@ -862,7 +863,6 @@
 	struct load_weight	load;		/* for load-balancing */
 	struct rb_node		run_node;
 	unsigned int		on_rq;
-	int			peer_preempt;
 
 	u64			exec_start;
 	u64			sum_exec_runtime;
@@ -1460,12 +1460,17 @@
 
 #ifdef CONFIG_SCHED_DEBUG
 extern unsigned int sysctl_sched_latency;
-extern unsigned int sysctl_sched_nr_latency;
+extern unsigned int sysctl_sched_min_granularity;
 extern unsigned int sysctl_sched_wakeup_granularity;
 extern unsigned int sysctl_sched_batch_wakeup_granularity;
 extern unsigned int sysctl_sched_child_runs_first;
 extern unsigned int sysctl_sched_features;
 extern unsigned int sysctl_sched_migration_cost;
+extern unsigned int sysctl_sched_nr_migrate;
+
+int sched_nr_latency_handler(struct ctl_table *table, int write,
+		struct file *file, void __user *buffer, size_t *length,
+		loff_t *ppos);
 #endif
 
 extern unsigned int sysctl_sched_compat_yield;
@@ -1983,6 +1988,14 @@
 }
 #endif
 
+#ifdef CONFIG_SMP
+void migration_init(void);
+#else
+static inline void migration_init(void)
+{
+}
+#endif
+
 #endif /* __KERNEL__ */
 
 #endif
diff --git a/include/linux/selinux.h b/include/linux/selinux.h
index d1b7ca6..6080f73 100644
--- a/include/linux/selinux.h
+++ b/include/linux/selinux.h
@@ -136,7 +136,7 @@
                                           char *rulestr,
                                           struct selinux_audit_rule **rule)
 {
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static inline void selinux_audit_rule_free(struct selinux_audit_rule *rule)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 94e4991..91140fe 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -387,7 +387,9 @@
 
 static inline void skb_truesize_check(struct sk_buff *skb)
 {
-	if (unlikely((int)skb->truesize < sizeof(struct sk_buff) + skb->len))
+	int len = sizeof(struct sk_buff) + skb->len;
+
+	if (unlikely((int)skb->truesize < len))
 		skb_truesize_bug(skb);
 }
 
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 259a13c..c25e66b 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -84,11 +84,12 @@
  *	These macros fold the SMP functionality into a single CPU system
  */
 #define raw_smp_processor_id()			0
-static inline int up_smp_call_function(void)
+static inline int up_smp_call_function(void (*func)(void *), void *info)
 {
 	return 0;
 }
-#define smp_call_function(func,info,retry,wait)	(up_smp_call_function())
+#define smp_call_function(func, info, retry, wait) \
+			(up_smp_call_function(func, info))
 #define on_each_cpu(func,info,retry,wait)	\
 	({					\
 		local_irq_disable();		\
@@ -107,6 +108,8 @@
 	local_irq_enable();	\
 	0;			\
 })
+#define smp_call_function_mask(mask, func, info, wait) \
+			(up_smp_call_function(func, info))
 
 #endif /* !SMP */
 
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 56164d7..c555f54 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -332,7 +332,9 @@
 
 extern int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		     unsigned long arg);
-
+extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
 extern dev_t tty_devnum(struct tty_struct *tty);
 extern void proc_clear_tty(struct task_struct *p);
 extern struct tty_struct *get_current_tty(void);
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index ac69e7b..1a4ed49 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -67,7 +67,7 @@
 };
 
 /* The standard layout for the ring is a continuous chunk of memory which looks
- * like this.  The used fields will be aligned to a "num+1" boundary.
+ * like this.  We assume num is a power of 2.
  *
  * struct vring
  * {
@@ -79,8 +79,8 @@
  *	__u16 avail_idx;
  *	__u16 available[num];
  *
- *	// Padding so a correctly-chosen num value will cache-align used_idx.
- *	char pad[sizeof(struct vring_desc) - sizeof(avail_flags)];
+ *	// Padding to the next page boundary.
+ *	char pad[];
  *
  *	// A ring of used descriptor heads with free-running index.
  *	__u16 used_flags;
@@ -88,18 +88,21 @@
  *	struct vring_used_elem used[num];
  * };
  */
-static inline void vring_init(struct vring *vr, unsigned int num, void *p)
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+			      unsigned int pagesize)
 {
 	vr->num = num;
 	vr->desc = p;
-	vr->avail = p + num*sizeof(struct vring);
-	vr->used = p + (num+1)*(sizeof(struct vring) + sizeof(__u16));
+	vr->avail = p + num*sizeof(struct vring_desc);
+	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + pagesize-1)
+			    & ~(pagesize - 1));
 }
 
-static inline unsigned vring_size(unsigned int num)
+static inline unsigned vring_size(unsigned int num, unsigned int pagesize)
 {
-	return (num + 1) * (sizeof(struct vring_desc) + sizeof(__u16))
-		+ sizeof(__u32) + num * sizeof(struct vring_used_elem);
+	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
+		 + pagesize - 1) & ~(pagesize - 1))
+		+ sizeof(__u16) * 2 + sizeof(struct vring_used_elem) * num;
 }
 
 #ifdef __KERNEL__
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 0864a77..a1c805d 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -12,7 +12,7 @@
 
 #define UNIX_HASH_SIZE	256
 
-extern atomic_t unix_tot_inflight;
+extern unsigned int unix_tot_inflight;
 
 struct unix_address {
 	atomic_t	refcnt;
diff --git a/include/net/dst.h b/include/net/dst.h
index e9ff4a4..2f65e89 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -143,6 +143,13 @@
 	atomic_inc(&dst->__refcnt);
 }
 
+static inline void dst_use(struct dst_entry *dst, unsigned long time)
+{
+	dst_hold(dst);
+	dst->__use++;
+	dst->lastuse = time;
+}
+
 static inline
 struct dst_entry * dst_clone(struct dst_entry * dst)
 {
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index 017aebd..41a301e 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -107,4 +107,7 @@
 extern int			fib_rules_lookup(struct fib_rules_ops *,
 						 struct flowi *, int flags,
 						 struct fib_lookup_arg *);
+extern int			fib_default_rule_add(struct fib_rules_ops *,
+						     u32 pref, u32 table,
+						     u32 flags);
 #endif
diff --git a/include/net/inet_common.h b/include/net/inet_common.h
index 227adcb..38d5a1e 100644
--- a/include/net/inet_common.h
+++ b/include/net/inet_common.h
@@ -13,9 +13,6 @@
 struct sockaddr;
 struct socket;
 
-extern void			inet_remove_sock(struct sock *sk1);
-extern void			inet_put_sock(unsigned short num, 
-					      struct sock *sk);
 extern int			inet_release(struct socket *sock);
 extern int			inet_stream_connect(struct socket *sock,
 						    struct sockaddr * uaddr,
@@ -30,7 +27,6 @@
 					     struct msghdr *msg, 
 					     size_t size);
 extern int			inet_shutdown(struct socket *sock, int how);
-extern unsigned int		inet_poll(struct file * file, struct socket *sock, struct poll_table_struct *wait);
 extern int			inet_listen(struct socket *sock, int backlog);
 
 extern void			inet_sock_destruct(struct sock *sk);
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index 4427dcd..469216d 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/wait.h>
+#include <linux/vmalloc.h>
 
 #include <net/inet_connection_sock.h>
 #include <net/inet_sock.h>
@@ -37,7 +38,6 @@
  * I'll experiment with dynamic table growth later.
  */
 struct inet_ehash_bucket {
-	rwlock_t	  lock;
 	struct hlist_head chain;
 	struct hlist_head twchain;
 };
@@ -100,6 +100,9 @@
 	 * TIME_WAIT sockets use a separate chain (twchain).
 	 */
 	struct inet_ehash_bucket	*ehash;
+	rwlock_t			*ehash_locks;
+	unsigned int			ehash_size;
+	unsigned int			ehash_locks_mask;
 
 	/* Ok, let's try this, I give up, we do need a local binding
 	 * TCP hash as well as the others for fast bind/connect.
@@ -107,7 +110,7 @@
 	struct inet_bind_hashbucket	*bhash;
 
 	unsigned int			bhash_size;
-	unsigned int			ehash_size;
+	/* Note : 4 bytes padding on 64 bit arches */
 
 	/* All sockets in TCP_LISTEN state will be in here.  This is the only
 	 * table where wildcard'd TCP sockets can exist.  Hash function here
@@ -134,6 +137,62 @@
 	return &hashinfo->ehash[hash & (hashinfo->ehash_size - 1)];
 }
 
+static inline rwlock_t *inet_ehash_lockp(
+	struct inet_hashinfo *hashinfo,
+	unsigned int hash)
+{
+	return &hashinfo->ehash_locks[hash & hashinfo->ehash_locks_mask];
+}
+
+static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
+{
+	unsigned int i, size = 256;
+#if defined(CONFIG_PROVE_LOCKING)
+	unsigned int nr_pcpus = 2;
+#else
+	unsigned int nr_pcpus = num_possible_cpus();
+#endif
+	if (nr_pcpus >= 4)
+		size = 512;
+	if (nr_pcpus >= 8)
+		size = 1024;
+	if (nr_pcpus >= 16)
+		size = 2048;
+	if (nr_pcpus >= 32)
+		size = 4096;
+	if (sizeof(rwlock_t) != 0) {
+#ifdef CONFIG_NUMA
+		if (size * sizeof(rwlock_t) > PAGE_SIZE)
+			hashinfo->ehash_locks = vmalloc(size * sizeof(rwlock_t));
+		else
+#endif
+		hashinfo->ehash_locks =	kmalloc(size * sizeof(rwlock_t),
+						GFP_KERNEL);
+		if (!hashinfo->ehash_locks)
+			return ENOMEM;
+		for (i = 0; i < size; i++)
+			rwlock_init(&hashinfo->ehash_locks[i]);
+	}
+	hashinfo->ehash_locks_mask = size - 1;
+	return 0;
+}
+
+static inline void inet_ehash_locks_free(struct inet_hashinfo *hashinfo)
+{
+	if (hashinfo->ehash_locks) {
+#ifdef CONFIG_NUMA
+		unsigned int size = (hashinfo->ehash_locks_mask + 1) *
+							sizeof(rwlock_t);
+		if (size > PAGE_SIZE)
+			vfree(hashinfo->ehash_locks);
+		else
+#else
+		kfree(hashinfo->ehash_locks);
+#endif
+		hashinfo->ehash_locks = NULL;
+	}
+}
+
 extern struct inet_bind_bucket *
 		    inet_bind_bucket_create(struct kmem_cache *cachep,
 					    struct inet_bind_hashbucket *head,
@@ -222,7 +281,7 @@
 		sk->sk_hash = inet_sk_ehashfn(sk);
 		head = inet_ehash_bucket(hashinfo, sk->sk_hash);
 		list = &head->chain;
-		lock = &head->lock;
+		lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
 		write_lock(lock);
 	}
 	__sk_add_node(sk, list);
@@ -253,7 +312,7 @@
 		inet_listen_wlock(hashinfo);
 		lock = &hashinfo->lhash_lock;
 	} else {
-		lock = &inet_ehash_bucket(hashinfo, sk->sk_hash)->lock;
+		lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
 		write_lock_bh(lock);
 	}
 
@@ -354,9 +413,10 @@
 	 */
 	unsigned int hash = inet_ehashfn(daddr, hnum, saddr, sport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash);
+	rwlock_t *lock = inet_ehash_lockp(hashinfo, hash);
 
 	prefetch(head->chain.first);
-	read_lock(&head->lock);
+	read_lock(lock);
 	sk_for_each(sk, node, &head->chain) {
 		if (INET_MATCH(sk, hash, acookie, saddr, daddr, ports, dif))
 			goto hit; /* You sunk my battleship! */
@@ -369,7 +429,7 @@
 	}
 	sk = NULL;
 out:
-	read_unlock(&head->lock);
+	read_unlock(lock);
 	return sk;
 hit:
 	sock_hold(sk);
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index aa10a81..ad8404b 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -22,7 +22,7 @@
 	__be32			v4daddr;	/* peer's address */
 	__u16			avl_height;
 	__u16			ip_id_count;	/* IP ID for the next packet */
-	struct inet_peer	*unused_next, **unused_prevp;
+	struct list_head	unused;
 	__u32			dtime;		/* the time of last use of not
 						 * referenced entries */
 	atomic_t		refcnt;
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 8cadc77..ed514bf 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -185,6 +185,12 @@
 }
 
 #else /* CONFIG_IP_MULTIPLE_TABLES */
+extern void __init fib4_rules_init(void);
+
+#ifdef CONFIG_NET_CLS_ROUTE
+extern u32 fib_rules_tclass(struct fib_result *res);
+#endif
+
 #define ip_fib_local_table fib_get_table(RT_TABLE_LOCAL)
 #define ip_fib_main_table fib_get_table(RT_TABLE_MAIN)
 
@@ -214,15 +220,6 @@
 /* Exported by fib_hash.c */
 extern struct fib_table *fib_hash_init(u32 id);
 
-#ifdef CONFIG_IP_MULTIPLE_TABLES
-extern void __init fib4_rules_init(void);
-
-#ifdef CONFIG_NET_CLS_ROUTE
-extern u32 fib_rules_tclass(struct fib_result *res);
-#endif
-
-#endif
-
 static inline void fib_combine_itag(u32 *itag, struct fib_result *res)
 {
 #ifdef CONFIG_NET_CLS_ROUTE
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 4187056..67ea2c0 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -520,6 +520,10 @@
 	spinlock_t              lock;           /* lock for state transition */
 	volatile __u16          flags;          /* status flags */
 	volatile __u16          state;          /* state info */
+	volatile __u16          old_state;      /* old state, to be used for
+						 * state transition triggerd
+						 * synchronization
+						 */
 
 	/* Control members */
 	struct ip_vs_conn       *control;       /* Master control connection */
@@ -901,6 +905,10 @@
 extern void ip_vs_use_count_dec(void);
 extern int ip_vs_control_init(void);
 extern void ip_vs_control_cleanup(void);
+extern struct ip_vs_dest *
+ip_vs_find_dest(__be32 daddr, __be16 dport,
+		 __be32 vaddr, __be16 vport, __u16 protocol);
+extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
 
 
 /*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5fcc4c1..17b6039 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -706,11 +706,16 @@
  *
  * @queues: number of available hardware transmit queues for
  *	data packets. WMM/QoS requires at least four.
+ *
+ * @rate_control_algorithm: rate control algorithm for this hardware.
+ *	If unset (NULL), the default algorithm will be used. Must be
+ *	set before calling ieee80211_register_hw().
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
 	struct wiphy *wiphy;
 	struct workqueue_struct *workqueue;
+	const char *rate_control_algorithm;
 	void *priv;
 	u32 flags;
 	unsigned int extra_tx_headroom;
@@ -936,27 +941,11 @@
  *	and remove_interface calls, i.e. while the interface with the
  *	given local_address is enabled.
  *
- * @set_ieee8021x: Enable/disable IEEE 802.1X. This item requests wlan card
- *	to pass unencrypted EAPOL-Key frames even when encryption is
- *	configured. If the wlan card does not require such a configuration,
- *	this function pointer can be set to NULL.
- *
- * @set_port_auth: Set port authorization state (IEEE 802.1X PAE) to be
- *	authorized (@authorized=1) or unauthorized (=0). This function can be
- *	used if the wlan hardware or low-level driver implements PAE.
- *	mac80211 will filter frames based on authorization state in any case,
- *	so this function pointer can be NULL if low-level driver does not
- *	require event notification about port state changes.
- *
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack.
  *
  * @get_stats: return low-level statistics
  *
- * @set_privacy_invoked: For devices that generate their own beacons and probe
- *	response or association responses this updates the state of privacy_invoked
- *	returns 0 for success or an error number.
- *
  * @get_sequence_counter: For devices that have internal sequence counters this
  *	callback allows mac80211 to access the current value of a counter.
  *	This callback seems not well-defined, tell us if you need it.
@@ -1029,14 +1018,9 @@
 	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		       const u8 *local_address, const u8 *address,
 		       struct ieee80211_key_conf *key);
-	int (*set_ieee8021x)(struct ieee80211_hw *hw, int use_ieee8021x);
-	int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr,
-			     int authorized);
 	int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
 	int (*get_stats)(struct ieee80211_hw *hw,
 			 struct ieee80211_low_level_stats *stats);
-	int (*set_privacy_invoked)(struct ieee80211_hw *hw,
-				   int privacy_invoked);
 	int (*get_sequence_counter)(struct ieee80211_hw *hw,
 				    u8* addr, u8 keyidx, u8 txrx,
 				    u32* iv32, u16* iv16);
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 1fd449a..5dd6d90 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -119,9 +119,11 @@
 #ifdef CONFIG_NET_NS
 #define __net_init
 #define __net_exit
+#define __net_initdata
 #else
 #define __net_init	__init
 #define __net_exit	__exit_refok
+#define __net_initdata	__initdata
 #endif
 
 struct pernet_operations {
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 7aed02c..cff4608 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -124,23 +124,7 @@
 extern int reqsk_queue_alloc(struct request_sock_queue *queue,
 			     unsigned int nr_table_entries);
 
-static inline struct listen_sock *reqsk_queue_yank_listen_sk(struct request_sock_queue *queue)
-{
-	struct listen_sock *lopt;
-
-	write_lock_bh(&queue->syn_wait_lock);
-	lopt = queue->listen_opt;
-	queue->listen_opt = NULL;
-	write_unlock_bh(&queue->syn_wait_lock);
-
-	return lopt;
-}
-
-static inline void __reqsk_queue_destroy(struct request_sock_queue *queue)
-{
-	kfree(reqsk_queue_yank_listen_sk(queue));
-}
-
+extern void __reqsk_queue_destroy(struct request_sock_queue *queue);
 extern void reqsk_queue_destroy(struct request_sock_queue *queue);
 
 static inline struct request_sock *
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index b873336..c1f7976 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -103,6 +103,7 @@
 	SCTP_CMD_ASSOC_CHANGE,	 /* generate and send assoc_change event */
 	SCTP_CMD_ADAPTATION_IND, /* generate and send adaptation event */
 	SCTP_CMD_ASSOC_SHKEY,    /* generate the association shared keys */
+	SCTP_CMD_T1_RETRAN,	 /* Mark for retransmission after T1 timeout  */
 	SCTP_CMD_LAST
 } sctp_verb_t;
 
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index da8354e..f30b537 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -186,6 +186,8 @@
 	SCTP_IERROR_AUTH_BAD_HMAC,
 	SCTP_IERROR_AUTH_BAD_KEYID,
 	SCTP_IERROR_PROTO_VIOLATION,
+	SCTP_IERROR_ERROR,
+	SCTP_IERROR_ABORT,
 } sctp_ierror_t;
 
 
@@ -407,6 +409,7 @@
 	SCTP_RTXR_T3_RTX,
 	SCTP_RTXR_FAST_RTX,
 	SCTP_RTXR_PMTUD,
+	SCTP_RTXR_T1_RTX,
 } sctp_retransmit_reason_t;
 
 /* Reasons to lower cwnd. */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 93eb708..34318a3 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -65,7 +65,6 @@
 
 
 #ifdef TEST_FRAME
-#undef CONFIG_PROC_FS
 #undef CONFIG_SCTP_DBG_OBJCNT
 #undef CONFIG_SYSCTL
 #endif /* TEST_FRAME */
@@ -267,6 +266,7 @@
 	SCTP_MIB_T5_SHUTDOWN_GUARD_EXPIREDS,
 	SCTP_MIB_DELAY_SACK_EXPIREDS,
 	SCTP_MIB_AUTOCLOSE_EXPIREDS,
+	SCTP_MIB_T1_RETRANSMITS,
 	SCTP_MIB_T3_RETRANSMITS,
 	SCTP_MIB_PMTUD_RETRANSMITS,
 	SCTP_MIB_FAST_RETRANSMITS,
@@ -664,6 +664,9 @@
 	return (h & (sctp_assoc_hashsize-1));
 }
 
+#define sctp_for_each_hentry(epb, node, head) \
+	hlist_for_each_entry(epb, node, head, node)
+
 /* Is a socket of this style? */
 #define sctp_style(sk, style) __sctp_style((sk), (SCTP_SOCKET_##style))
 static inline int __sctp_style(const struct sock *sk, sctp_socket_type_t style)
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index ef892e0..eb3113c 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -100,20 +100,19 @@
 struct sctp_bind_bucket {
 	unsigned short	port;
 	unsigned short	fastreuse;
-	struct sctp_bind_bucket *next;
-	struct sctp_bind_bucket **pprev;
+	struct hlist_node	node;
 	struct hlist_head	owner;
 };
 
 struct sctp_bind_hashbucket {
 	spinlock_t	lock;
-	struct sctp_bind_bucket	*chain;
+	struct hlist_head	chain;
 };
 
 /* Used for hashing all associations.  */
 struct sctp_hashbucket {
 	rwlock_t	lock;
-	struct sctp_ep_common  *chain;
+	struct hlist_head	chain;
 } __attribute__((__aligned__(8)));
 
 
@@ -212,6 +211,7 @@
 	
 	/* Flag to indicate if addip is enabled. */
 	int addip_enable;
+	int addip_noauth_enable;
 
 	/* Flag to indicate if PR-SCTP is enabled. */
 	int prsctp_enable;
@@ -249,6 +249,7 @@
 #define sctp_local_addr_list		(sctp_globals.local_addr_list)
 #define sctp_local_addr_lock		(sctp_globals.addr_list_lock)
 #define sctp_addip_enable		(sctp_globals.addip_enable)
+#define sctp_addip_noauth		(sctp_globals.addip_noauth_enable)
 #define sctp_prsctp_enable		(sctp_globals.prsctp_enable)
 #define sctp_auth_enable		(sctp_globals.auth_enable)
 
@@ -873,10 +874,11 @@
 	 * address list derived from the INIT or INIT ACK chunk, a
 	 * number of data elements needs to be maintained including:
 	 */
-	__u32 rtt;		/* This is the most recent RTT.	 */
-
 	/* RTO	       : The current retransmission timeout value.  */
 	unsigned long rto;
+	unsigned long last_rto;
+
+	__u32 rtt;		/* This is the most recent RTT.	 */
 
 	/* RTTVAR      : The current RTT variation.  */
 	__u32 rttvar;
@@ -1184,9 +1186,7 @@
 			int flags);
 int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
 		       __u8 use_as_src, gfp_t gfp);
-int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
-			void fastcall (*rcu_call)(struct rcu_head *,
-					  void (*func)(struct rcu_head *)));
+int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
 int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *,
 			 struct sctp_sock *);
 union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
@@ -1229,8 +1229,7 @@
 
 struct sctp_ep_common {
 	/* Fields to help us manage our entries in the hash tables. */
-	struct sctp_ep_common *next;
-	struct sctp_ep_common **pprev;
+	struct hlist_node node;
 	int hashent;
 
 	/* Runtime type information.  What kind of endpoint is this? */
@@ -1541,7 +1540,6 @@
 		__u8    asconf_capable;  /* Does peer support ADDIP? */
 		__u8    prsctp_capable;  /* Can peer do PR-SCTP? */
 		__u8	auth_capable;	 /* Is peer doing SCTP-AUTH? */
-		__u8	addip_capable;	 /* Can peer do ADD-IP */
 
 		__u32   adaptation_ind;	 /* Adaptation Code point. */
 
diff --git a/include/net/sock.h b/include/net/sock.h
index 20de3fa..567e468 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -560,6 +560,14 @@
 	void			(*unhash)(struct sock *sk);
 	int			(*get_port)(struct sock *sk, unsigned short snum);
 
+#ifdef CONFIG_SMP
+	/* Keeping track of sockets in use */
+	void			(*inuse_add)(struct proto *prot, int inc);
+	int			(*inuse_getval)(const struct proto *prot);
+	int			*inuse_ptr;
+#else
+	int			inuse;
+#endif
 	/* Memory pressure */
 	void			(*enter_memory_pressure)(void);
 	atomic_t		*memory_allocated;	/* Current allocated memory. */
@@ -592,12 +600,38 @@
 #ifdef SOCK_REFCNT_DEBUG
 	atomic_t		socks;
 #endif
-	struct {
-		int inuse;
-		u8  __pad[SMP_CACHE_BYTES - sizeof(int)];
-	} stats[NR_CPUS];
 };
 
+/*
+ * Special macros to let protos use a fast version of inuse{get|add}
+ * using a static percpu variable per proto instead of an allocated one,
+ * saving one dereference.
+ * This might be changed if/when dynamic percpu vars become fast.
+ */
+#ifdef CONFIG_SMP
+# define DEFINE_PROTO_INUSE(NAME)			\
+static DEFINE_PER_CPU(int, NAME##_inuse);		\
+static void NAME##_inuse_add(struct proto *prot, int inc)	\
+{							\
+	__get_cpu_var(NAME##_inuse) += inc;		\
+}							\
+							\
+static int NAME##_inuse_getval(const struct proto *prot)\
+{							\
+	int res = 0, cpu;				\
+							\
+	for_each_possible_cpu(cpu)			\
+		res += per_cpu(NAME##_inuse, cpu);	\
+	return res;					\
+}
+# define REF_PROTO_INUSE(NAME)				\
+	.inuse_add = NAME##_inuse_add,			\
+	.inuse_getval = NAME##_inuse_getval,
+#else
+# define DEFINE_PROTO_INUSE(NAME)
+# define REF_PROTO_INUSE(NAME)
+#endif
+
 extern int proto_register(struct proto *prot, int alloc_slab);
 extern void proto_unregister(struct proto *prot);
 
@@ -629,12 +663,29 @@
 /* Called with local bh disabled */
 static __inline__ void sock_prot_inc_use(struct proto *prot)
 {
-	prot->stats[smp_processor_id()].inuse++;
+#ifdef CONFIG_SMP
+	prot->inuse_add(prot, 1);
+#else
+	prot->inuse++;
+#endif
 }
 
 static __inline__ void sock_prot_dec_use(struct proto *prot)
 {
-	prot->stats[smp_processor_id()].inuse--;
+#ifdef CONFIG_SMP
+	prot->inuse_add(prot, -1);
+#else
+	prot->inuse--;
+#endif
+}
+
+static __inline__ int sock_prot_inuse(struct proto *proto)
+{
+#ifdef CONFIG_SMP
+	return proto->inuse_getval(proto);
+#else
+	return proto->inuse;
+#endif
 }
 
 /* With per-bucket locks this operation is not-atomic, so that
@@ -1184,14 +1235,16 @@
 						   gfp_t gfp)
 {
 	struct sk_buff *skb;
-	int hdr_len;
 
-	hdr_len = SKB_DATA_ALIGN(sk->sk_prot->max_header);
-	skb = alloc_skb_fclone(size + hdr_len, gfp);
+	skb = alloc_skb_fclone(size + sk->sk_prot->max_header, gfp);
 	if (skb) {
 		skb->truesize += mem;
 		if (sk_stream_wmem_schedule(sk, skb->truesize)) {
-			skb_reserve(skb, hdr_len);
+			/*
+			 * Make sure that we have exactly size bytes
+			 * available to the caller, no more, no less.
+			 */
+			skb_reserve(skb, skb_tailroom(skb) - size);
 			return skb;
 		}
 		__kfree_skb(skb);
diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
index c1d1629..5f38803 100644
--- a/include/pcmcia/cs_types.h
+++ b/include/pcmcia/cs_types.h
@@ -21,7 +21,7 @@
 #include <sys/types.h>
 #endif
 
-#if defined(__arm__) || defined(__mips__)
+#if defined(__arm__) || defined(__mips__) || defined(__avr32__)
 /* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
 typedef u_int   ioaddr_t;
 #else
diff --git a/init/Kconfig b/init/Kconfig
index 8b88d0b..c5b354b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -215,6 +215,18 @@
 	  vservers, to use user namespaces to provide different
 	  user info for different servers.  If unsure, say N.
 
+config PID_NS
+	bool "PID Namespaces (EXPERIMENTAL)"
+	default n
+	depends on EXPERIMENTAL
+	help
+	  Suport process id namespaces.  This allows having multiple
+	  process with the same pid as long as they are in different
+	  pid namespaces.  This is a building block of containers.
+
+	  Unless you want to work with an experimental feature
+	  say N here.
+
 config AUDIT
 	bool "Auditing support"
 	depends on NET
@@ -301,13 +313,6 @@
           for instance virtual servers and checkpoint/restart
           jobs.
 
-config CGROUP_CPUACCT
-	bool "Simple CPU accounting cgroup subsystem"
-	depends on CGROUPS
-	help
-	  Provides a simple Resource Controller for monitoring the
-	  total CPU consumed by the tasks in a cgroup
-
 config CPUSETS
 	bool "Cpuset support"
 	depends on SMP && CGROUPS
diff --git a/init/main.c b/init/main.c
index f605a96..80b04b6 100644
--- a/init/main.c
+++ b/init/main.c
@@ -56,6 +56,7 @@
 #include <linux/pid_namespace.h>
 #include <linux/device.h>
 #include <linux/kthread.h>
+#include <linux/sched.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -747,11 +748,8 @@
 static void __init do_pre_smp_initcalls(void)
 {
 	extern int spawn_ksoftirqd(void);
-#ifdef CONFIG_SMP
-	extern int migration_init(void);
 
 	migration_init();
-#endif
 	spawn_ksoftirqd();
 	if (!nosoftlockup)
 		spawn_softlockup_task();
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index bfa274b..1e04cd4 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -1010,6 +1010,8 @@
 			return -EINVAL;
 		}
 		if (notification.sigev_notify == SIGEV_THREAD) {
+			long timeo;
+
 			/* create the notify skb */
 			nc = alloc_skb(NOTIFY_COOKIE_LEN, GFP_KERNEL);
 			ret = -ENOMEM;
@@ -1038,8 +1040,8 @@
 				goto out;
 			}
 
-			ret = netlink_attachskb(sock, nc, 0,
-					MAX_SCHEDULE_TIMEOUT, NULL);
+			timeo = MAX_SCHEDULE_TIMEOUT;
+			ret = netlink_attachskb(sock, nc, 0, &timeo, NULL);
 			if (ret == 1)
 		       		goto retry;
 			if (ret) {
diff --git a/kernel/Makefile b/kernel/Makefile
index f60afe7..dfa9695 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -40,7 +40,6 @@
 obj-$(CONFIG_CGROUPS) += cgroup.o
 obj-$(CONFIG_CGROUP_DEBUG) += cgroup_debug.o
 obj-$(CONFIG_CPUSETS) += cpuset.o
-obj-$(CONFIG_CGROUP_CPUACCT) += cpu_acct.o
 obj-$(CONFIG_CGROUP_NS) += ns_cgroup.o
 obj-$(CONFIG_IKCONFIG) += configs.o
 obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3fe21e1..1a3c239 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1,6 +1,4 @@
 /*
- *  kernel/cgroup.c
- *
  *  Generic process-grouping system.
  *
  *  Based originally on the cpuset system, extracted by Paul Menage
@@ -2200,7 +2198,8 @@
 {
 	struct cgroup_subsys_state *css;
 	struct list_head *l;
-	printk(KERN_ERR "Initializing cgroup subsys %s\n", ss->name);
+
+	printk(KERN_INFO "Initializing cgroup subsys %s\n", ss->name);
 
 	/* Create the top cgroup state for this subsystem */
 	ss->root = &rootnode;
@@ -2273,7 +2272,7 @@
 		BUG_ON(!ss->create);
 		BUG_ON(!ss->destroy);
 		if (ss->subsys_id != i) {
-			printk(KERN_ERR "Subsys %s id == %d\n",
+			printk(KERN_ERR "cgroup: Subsys %s id == %d\n",
 			       ss->name, ss->subsys_id);
 			BUG();
 		}
@@ -2605,7 +2604,7 @@
 	dentry = lookup_one_len(nodename, parent->dentry, strlen(nodename));
 	if (IS_ERR(dentry)) {
 		printk(KERN_INFO
-		       "Couldn't allocate dentry for %s: %ld\n", nodename,
+		       "cgroup: Couldn't allocate dentry for %s: %ld\n", nodename,
 		       PTR_ERR(dentry));
 		ret = PTR_ERR(dentry);
 		goto out_release;
diff --git a/kernel/cpu_acct.c b/kernel/cpu_acct.c
deleted file mode 100644
index 731e47e..0000000
--- a/kernel/cpu_acct.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * kernel/cpu_acct.c - CPU accounting cgroup subsystem
- *
- * Copyright (C) Google Inc, 2006
- *
- * Developed by Paul Menage (menage@google.com) and Balbir Singh
- * (balbir@in.ibm.com)
- *
- */
-
-/*
- * Example cgroup subsystem for reporting total CPU usage of tasks in a
- * cgroup, along with percentage load over a time interval
- */
-
-#include <linux/module.h>
-#include <linux/cgroup.h>
-#include <linux/fs.h>
-#include <linux/rcupdate.h>
-
-#include <asm/div64.h>
-
-struct cpuacct {
-	struct cgroup_subsys_state css;
-	spinlock_t lock;
-	/* total time used by this class */
-	cputime64_t time;
-
-	/* time when next load calculation occurs */
-	u64 next_interval_check;
-
-	/* time used in current period */
-	cputime64_t current_interval_time;
-
-	/* time used in last period */
-	cputime64_t last_interval_time;
-};
-
-struct cgroup_subsys cpuacct_subsys;
-
-static inline struct cpuacct *cgroup_ca(struct cgroup *cont)
-{
-	return container_of(cgroup_subsys_state(cont, cpuacct_subsys_id),
-			    struct cpuacct, css);
-}
-
-static inline struct cpuacct *task_ca(struct task_struct *task)
-{
-	return container_of(task_subsys_state(task, cpuacct_subsys_id),
-			    struct cpuacct, css);
-}
-
-#define INTERVAL (HZ * 10)
-
-static inline u64 next_interval_boundary(u64 now)
-{
-	/* calculate the next interval boundary beyond the
-	 * current time */
-	do_div(now, INTERVAL);
-	return (now + 1) * INTERVAL;
-}
-
-static struct cgroup_subsys_state *cpuacct_create(
-	struct cgroup_subsys *ss, struct cgroup *cont)
-{
-	struct cpuacct *ca = kzalloc(sizeof(*ca), GFP_KERNEL);
-
-	if (!ca)
-		return ERR_PTR(-ENOMEM);
-	spin_lock_init(&ca->lock);
-	ca->next_interval_check = next_interval_boundary(get_jiffies_64());
-	return &ca->css;
-}
-
-static void cpuacct_destroy(struct cgroup_subsys *ss,
-			    struct cgroup *cont)
-{
-	kfree(cgroup_ca(cont));
-}
-
-/* Lazily update the load calculation if necessary. Called with ca locked */
-static void cpuusage_update(struct cpuacct *ca)
-{
-	u64 now = get_jiffies_64();
-
-	/* If we're not due for an update, return */
-	if (ca->next_interval_check > now)
-		return;
-
-	if (ca->next_interval_check <= (now - INTERVAL)) {
-		/* If it's been more than an interval since the last
-		 * check, then catch up - the last interval must have
-		 * been zero load */
-		ca->last_interval_time = 0;
-		ca->next_interval_check = next_interval_boundary(now);
-	} else {
-		/* If a steal takes the last interval time negative,
-		 * then we just ignore it */
-		if ((s64)ca->current_interval_time > 0)
-			ca->last_interval_time = ca->current_interval_time;
-		else
-			ca->last_interval_time = 0;
-		ca->next_interval_check += INTERVAL;
-	}
-	ca->current_interval_time = 0;
-}
-
-static u64 cpuusage_read(struct cgroup *cont, struct cftype *cft)
-{
-	struct cpuacct *ca = cgroup_ca(cont);
-	u64 time;
-
-	spin_lock_irq(&ca->lock);
-	cpuusage_update(ca);
-	time = cputime64_to_jiffies64(ca->time);
-	spin_unlock_irq(&ca->lock);
-
-	/* Convert 64-bit jiffies to seconds */
-	time *= 1000;
-	do_div(time, HZ);
-	return time;
-}
-
-static u64 load_read(struct cgroup *cont, struct cftype *cft)
-{
-	struct cpuacct *ca = cgroup_ca(cont);
-	u64 time;
-
-	/* Find the time used in the previous interval */
-	spin_lock_irq(&ca->lock);
-	cpuusage_update(ca);
-	time = cputime64_to_jiffies64(ca->last_interval_time);
-	spin_unlock_irq(&ca->lock);
-
-	/* Convert time to a percentage, to give the load in the
-	 * previous period */
-	time *= 100;
-	do_div(time, INTERVAL);
-
-	return time;
-}
-
-static struct cftype files[] = {
-	{
-		.name = "usage",
-		.read_uint = cpuusage_read,
-	},
-	{
-		.name = "load",
-		.read_uint = load_read,
-	}
-};
-
-static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cont)
-{
-	return cgroup_add_files(cont, ss, files, ARRAY_SIZE(files));
-}
-
-void cpuacct_charge(struct task_struct *task, cputime_t cputime)
-{
-
-	struct cpuacct *ca;
-	unsigned long flags;
-
-	if (!cpuacct_subsys.active)
-		return;
-	rcu_read_lock();
-	ca = task_ca(task);
-	if (ca) {
-		spin_lock_irqsave(&ca->lock, flags);
-		cpuusage_update(ca);
-		ca->time = cputime64_add(ca->time, cputime);
-		ca->current_interval_time =
-			cputime64_add(ca->current_interval_time, cputime);
-		spin_unlock_irqrestore(&ca->lock, flags);
-	}
-	rcu_read_unlock();
-}
-
-struct cgroup_subsys cpuacct_subsys = {
-	.name = "cpuacct",
-	.create = cpuacct_create,
-	.destroy = cpuacct_destroy,
-	.populate = cpuacct_populate,
-	.subsys_id = cpuacct_subsys_id,
-};
diff --git a/kernel/exit.c b/kernel/exit.c
index f1aec27..cd0f1d4 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1386,8 +1386,7 @@
 		int why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED;
 
 		exit_code = p->exit_code;
-		if (unlikely(!exit_code) ||
-		    unlikely(p->state & TASK_TRACED))
+		if (unlikely(!exit_code) || unlikely(p->exit_state))
 			goto bail_ref;
 		return wait_noreap_copyout(p, pid, uid,
 					   why, (exit_code << 8) | 0x7f,
diff --git a/kernel/fork.c b/kernel/fork.c
index 28a7401..8ca1a14 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1123,6 +1123,9 @@
 	p->blocked_on = NULL; /* not blocked yet */
 #endif
 
+	/* Perform scheduler related setup. Assign this task to a CPU. */
+	sched_fork(p, clone_flags);
+
 	if ((retval = security_task_alloc(p)))
 		goto bad_fork_cleanup_policy;
 	if ((retval = audit_alloc(p)))
@@ -1212,9 +1215,6 @@
 	INIT_LIST_HEAD(&p->ptrace_children);
 	INIT_LIST_HEAD(&p->ptrace_list);
 
-	/* Perform scheduler related setup. Assign this task to a CPU. */
-	sched_fork(p, clone_flags);
-
 	/* Now that the task is set up, run cgroup callbacks if
 	 * necessary. We need to run them before the task is visible
 	 * on the tasklist. */
diff --git a/kernel/futex.c b/kernel/futex.c
index 3271045..9dc591a 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -181,8 +181,8 @@
  * For other futexes, it points to &current->mm->mmap_sem and
  * caller must have taken the reader lock. but NOT any spinlocks.
  */
-int get_futex_key(u32 __user *uaddr, struct rw_semaphore *fshared,
-		  union futex_key *key)
+static int get_futex_key(u32 __user *uaddr, struct rw_semaphore *fshared,
+			 union futex_key *key)
 {
 	unsigned long address = (unsigned long)uaddr;
 	struct mm_struct *mm = current->mm;
@@ -268,14 +268,13 @@
 	}
 	return err;
 }
-EXPORT_SYMBOL_GPL(get_futex_key);
 
 /*
  * Take a reference to the resource addressed by a key.
  * Can be called while holding spinlocks.
  *
  */
-inline void get_futex_key_refs(union futex_key *key)
+static void get_futex_key_refs(union futex_key *key)
 {
 	if (key->both.ptr == 0)
 		return;
@@ -288,13 +287,12 @@
 			break;
 	}
 }
-EXPORT_SYMBOL_GPL(get_futex_key_refs);
 
 /*
  * Drop a reference to the resource addressed by a key.
  * The hash bucket spinlock must not be held.
  */
-void drop_futex_key_refs(union futex_key *key)
+static void drop_futex_key_refs(union futex_key *key)
 {
 	if (!key->both.ptr)
 		return;
@@ -307,7 +305,6 @@
 			break;
 	}
 }
-EXPORT_SYMBOL_GPL(drop_futex_key_refs);
 
 static u32 cmpxchg_futex_value_locked(u32 __user *uaddr, u32 uval, u32 newval)
 {
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 00b5726..0a43def 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -30,6 +30,15 @@
 	return 0;
 }
 
+static void __user *futex_uaddr(struct robust_list *entry,
+				compat_long_t futex_offset)
+{
+	compat_uptr_t base = ptr_to_compat(entry);
+	void __user *uaddr = compat_ptr(base + futex_offset);
+
+	return uaddr;
+}
+
 /*
  * Walk curr->robust_list (very carefully, it's a userspace list!)
  * and mark any locks found there dead, and notify any waiters.
@@ -76,11 +85,12 @@
 		 * A pending lock might already be on the list, so
 		 * dont process it twice:
 		 */
-		if (entry != pending)
-			if (handle_futex_death((void __user *)entry + futex_offset,
-						curr, pi))
-				return;
+		if (entry != pending) {
+			void __user *uaddr = futex_uaddr(entry, futex_offset);
 
+			if (handle_futex_death(uaddr, curr, pi))
+				return;
+		}
 		if (rc)
 			return;
 		uentry = next_uentry;
@@ -94,9 +104,11 @@
 
 		cond_resched();
 	}
-	if (pending)
-		handle_futex_death((void __user *)pending + futex_offset,
-				   curr, pip);
+	if (pending) {
+		void __user *uaddr = futex_uaddr(pending, futex_offset);
+
+		handle_futex_death(uaddr, curr, pip);
+	}
 }
 
 asmlinkage long
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index e391cbb..dc335ad 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -178,9 +178,11 @@
 		 */
 		if (desc->chip->ack)
 			desc->chip->ack(irq);
-		action_ret = handle_IRQ_event(irq, desc->action);
-		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret);
+		if (likely(!(desc->status & IRQ_DISABLED))) {
+			action_ret = handle_IRQ_event(irq, desc->action);
+			if (!noirqdebug)
+				note_interrupt(irq, desc, action_ret);
+		}
 		desc->chip->end(irq);
 		return 1;
 	}
diff --git a/kernel/marker.c b/kernel/marker.c
index ccb48d9..5323cfa 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -28,7 +28,7 @@
 extern struct marker __stop___markers[];
 
 /*
- * module_mutex nests inside markers_mutex. Markers mutex protects the builtin
+ * markers_mutex nests inside module_mutex. Markers mutex protects the builtin
  * and module markers, the hash table and deferred_sync.
  */
 static DEFINE_MUTEX(markers_mutex);
@@ -257,7 +257,6 @@
  * @refcount: number of references left to the given probe_module (out)
  *
  * Updates the probe callback corresponding to a range of markers.
- * Must be called with markers_mutex held.
  */
 void marker_update_probe_range(struct marker *begin,
 	struct marker *end, struct module *probe_module,
@@ -266,6 +265,7 @@
 	struct marker *iter;
 	struct marker_entry *mark_entry;
 
+	mutex_lock(&markers_mutex);
 	for (iter = begin; iter < end; iter++) {
 		mark_entry = get_marker(iter->name);
 		if (mark_entry && mark_entry->refcount) {
@@ -281,6 +281,7 @@
 			disable_marker(iter);
 		}
 	}
+	mutex_unlock(&markers_mutex);
 }
 
 /*
@@ -293,7 +294,6 @@
 {
 	int refcount = 0;
 
-	mutex_lock(&markers_mutex);
 	/* Core kernel markers */
 	marker_update_probe_range(__start___markers,
 			__stop___markers, probe_module, &refcount);
@@ -303,7 +303,6 @@
 		synchronize_sched();
 		deferred_sync = 0;
 	}
-	mutex_unlock(&markers_mutex);
 }
 
 /**
@@ -320,7 +319,7 @@
 			marker_probe_func *probe, void *private)
 {
 	struct marker_entry *entry;
-	int ret = 0, need_update = 0;
+	int ret = 0;
 
 	mutex_lock(&markers_mutex);
 	entry = get_marker(name);
@@ -335,11 +334,11 @@
 	ret = add_marker(name, format, probe, private);
 	if (ret)
 		goto end;
-	need_update = 1;
+	mutex_unlock(&markers_mutex);
+	marker_update_probes(NULL);
+	return ret;
 end:
 	mutex_unlock(&markers_mutex);
-	if (need_update)
-		marker_update_probes(NULL);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(marker_probe_register);
@@ -355,7 +354,6 @@
 	struct module *probe_module;
 	struct marker_entry *entry;
 	void *private;
-	int need_update = 0;
 
 	mutex_lock(&markers_mutex);
 	entry = get_marker(name);
@@ -368,11 +366,11 @@
 	probe_module = __module_text_address((unsigned long)entry->probe);
 	private = remove_marker(name);
 	deferred_sync = 1;
-	need_update = 1;
+	mutex_unlock(&markers_mutex);
+	marker_update_probes(probe_module);
+	return private;
 end:
 	mutex_unlock(&markers_mutex);
-	if (need_update)
-		marker_update_probes(probe_module);
 	return private;
 }
 EXPORT_SYMBOL_GPL(marker_probe_unregister);
@@ -392,7 +390,6 @@
 	struct marker_entry *entry;
 	int found = 0;
 	unsigned int i;
-	int need_update = 0;
 
 	mutex_lock(&markers_mutex);
 	for (i = 0; i < MARKER_TABLE_SIZE; i++) {
@@ -414,11 +411,11 @@
 	probe_module = __module_text_address((unsigned long)entry->probe);
 	private = remove_marker(entry->name);
 	deferred_sync = 1;
-	need_update = 1;
+	mutex_unlock(&markers_mutex);
+	marker_update_probes(probe_module);
+	return private;
 end:
 	mutex_unlock(&markers_mutex);
-	if (need_update)
-		marker_update_probes(probe_module);
 	return private;
 }
 EXPORT_SYMBOL_GPL(marker_probe_unregister_private_data);
@@ -434,7 +431,7 @@
 int marker_arm(const char *name)
 {
 	struct marker_entry *entry;
-	int ret = 0, need_update = 0;
+	int ret = 0;
 
 	mutex_lock(&markers_mutex);
 	entry = get_marker(name);
@@ -447,11 +444,9 @@
 	 */
 	if (entry->refcount++)
 		goto end;
-	need_update = 1;
 end:
 	mutex_unlock(&markers_mutex);
-	if (need_update)
-		marker_update_probes(NULL);
+	marker_update_probes(NULL);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(marker_arm);
@@ -467,7 +462,7 @@
 int marker_disarm(const char *name)
 {
 	struct marker_entry *entry;
-	int ret = 0, need_update = 0;
+	int ret = 0;
 
 	mutex_lock(&markers_mutex);
 	entry = get_marker(name);
@@ -486,11 +481,9 @@
 		ret = -EPERM;
 		goto end;
 	}
-	need_update = 1;
 end:
 	mutex_unlock(&markers_mutex);
-	if (need_update)
-		marker_update_probes(NULL);
+	marker_update_probes(NULL);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(marker_disarm);
diff --git a/kernel/params.c b/kernel/params.c
index 16f269e..2a4c514 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -592,19 +592,16 @@
 
 	for (i=0; i < __stop___param - __start___param; i++) {
 		char *dot;
-		size_t kplen;
+		size_t max_name_len;
 
 		kp = &__start___param[i];
-		kplen = strlen(kp->name);
+		max_name_len =
+			min_t(size_t, MAX_KBUILD_MODNAME, strlen(kp->name));
 
-		/* We do not handle args without periods. */
-		if (kplen > MAX_KBUILD_MODNAME) {
-			DEBUGP("kernel parameter name is too long: %s\n", kp->name);
-			continue;
-		}
-		dot = memchr(kp->name, '.', kplen);
+		dot = memchr(kp->name, '.', max_name_len);
 		if (!dot) {
-			DEBUGP("couldn't find period in %s\n", kp->name);
+			DEBUGP("couldn't find period in first %d characters "
+			       "of %s\n", MAX_KBUILD_MODNAME, kp->name);
 			continue;
 		}
 		name_len = dot - kp->name;
diff --git a/kernel/pid.c b/kernel/pid.c
index d1db36b..f815455 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -537,6 +537,7 @@
 	return NULL;
 }
 
+#ifdef CONFIG_PID_NS
 static struct pid_namespace *create_pid_namespace(int level)
 {
 	struct pid_namespace *ns;
@@ -621,6 +622,7 @@
 	if (parent != NULL)
 		put_pid_ns(parent);
 }
+#endif /* CONFIG_PID_NS */
 
 void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 {
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 8b15f77..05b6479 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -456,7 +456,17 @@
 	int error;
 	unsigned int flags;
 
-	mutex_lock(&pm_mutex);
+	/*
+	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
+	 * is configured into the kernel. Since the regular hibernate
+	 * trigger path is via sysfs which takes a buffer mutex before
+	 * calling hibernate functions (which take pm_mutex) this can
+	 * cause lockdep to complain about a possible ABBA deadlock
+	 * which cannot happen since we're in the boot code here and
+	 * sysfs can't be invoked yet. Therefore, we use a subclass
+	 * here to avoid lockdep complaining.
+	 */
+	mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
 	if (!swsusp_resume_device) {
 		if (!strlen(resume_file)) {
 			mutex_unlock(&pm_mutex);
diff --git a/kernel/resource.c b/kernel/resource.c
index a358142..2eb553d 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -277,7 +277,7 @@
 	int ret = -1;
 	res.start = (u64) start_pfn << PAGE_SHIFT;
 	res.end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1;
-	res.flags = IORESOURCE_MEM;
+	res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	orig_end = res.end;
 	while ((res.start < res.end) && (find_next_system_ram(&res) >= 0)) {
 		pfn = (unsigned long)(res.start >> PAGE_SHIFT);
diff --git a/kernel/sched.c b/kernel/sched.c
index 3f6bd11..38933ca 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -52,7 +52,6 @@
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
 #include <linux/percpu.h>
-#include <linux/cpu_acct.h>
 #include <linux/kthread.h>
 #include <linux/seq_file.h>
 #include <linux/sysctl.h>
@@ -75,7 +74,7 @@
  */
 unsigned long long __attribute__((weak)) sched_clock(void)
 {
-	return (unsigned long long)jiffies * (1000000000 / HZ);
+	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
 }
 
 /*
@@ -99,8 +98,8 @@
 /*
  * Some helpers for converting nanosecond timing to jiffy resolution
  */
-#define NS_TO_JIFFIES(TIME)	((unsigned long)(TIME) / (1000000000 / HZ))
-#define JIFFIES_TO_NS(TIME)	((TIME) * (1000000000 / HZ))
+#define NS_TO_JIFFIES(TIME)	((unsigned long)(TIME) / (NSEC_PER_SEC / HZ))
+#define JIFFIES_TO_NS(TIME)	((TIME) * (NSEC_PER_SEC / HZ))
 
 #define NICE_0_LOAD		SCHED_LOAD_SCALE
 #define NICE_0_SHIFT		SCHED_LOAD_SHIFT
@@ -217,15 +216,15 @@
 }
 
 /* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
-static inline void set_task_cfs_rq(struct task_struct *p)
+static inline void set_task_cfs_rq(struct task_struct *p, unsigned int cpu)
 {
-	p->se.cfs_rq = task_group(p)->cfs_rq[task_cpu(p)];
-	p->se.parent = task_group(p)->se[task_cpu(p)];
+	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
+	p->se.parent = task_group(p)->se[cpu];
 }
 
 #else
 
-static inline void set_task_cfs_rq(struct task_struct *p) { }
+static inline void set_task_cfs_rq(struct task_struct *p, unsigned int cpu) { }
 
 #endif	/* CONFIG_FAIR_GROUP_SCHED */
 
@@ -456,24 +455,28 @@
  */
 enum {
 	SCHED_FEAT_NEW_FAIR_SLEEPERS	= 1,
-	SCHED_FEAT_START_DEBIT		= 2,
-	SCHED_FEAT_TREE_AVG             = 4,
-	SCHED_FEAT_APPROX_AVG           = 8,
-	SCHED_FEAT_WAKEUP_PREEMPT	= 16,
-	SCHED_FEAT_PREEMPT_RESTRICT	= 32,
+	SCHED_FEAT_WAKEUP_PREEMPT	= 2,
+	SCHED_FEAT_START_DEBIT		= 4,
+	SCHED_FEAT_TREE_AVG             = 8,
+	SCHED_FEAT_APPROX_AVG           = 16,
 };
 
 const_debug unsigned int sysctl_sched_features =
 		SCHED_FEAT_NEW_FAIR_SLEEPERS	* 1 |
+		SCHED_FEAT_WAKEUP_PREEMPT	* 1 |
 		SCHED_FEAT_START_DEBIT		* 1 |
 		SCHED_FEAT_TREE_AVG		* 0 |
-		SCHED_FEAT_APPROX_AVG		* 0 |
-		SCHED_FEAT_WAKEUP_PREEMPT	* 1 |
-		SCHED_FEAT_PREEMPT_RESTRICT	* 1;
+		SCHED_FEAT_APPROX_AVG		* 0;
 
 #define sched_feat(x) (sysctl_sched_features & SCHED_FEAT_##x)
 
 /*
+ * Number of tasks to iterate in a single balance run.
+ * Limited because this is done with IRQs disabled.
+ */
+const_debug unsigned int sysctl_sched_nr_migrate = 32;
+
+/*
  * For kernel-internal use: high-speed (but slightly incorrect) per-cpu
  * clock constructed from sched_clock():
  */
@@ -1019,10 +1022,16 @@
 
 static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
 {
+	set_task_cfs_rq(p, cpu);
 #ifdef CONFIG_SMP
+	/*
+	 * After ->cpu is set up to a new value, task_rq_lock(p, ...) can be
+	 * successfuly executed on another CPU. We must ensure that updates of
+	 * per-task data have been completed by this moment.
+	 */
+	smp_wmb();
 	task_thread_info(p)->cpu = cpu;
 #endif
-	set_task_cfs_rq(p);
 }
 
 #ifdef CONFIG_SMP
@@ -2237,7 +2246,7 @@
 	      enum cpu_idle_type idle, int *all_pinned,
 	      int *this_best_prio, struct rq_iterator *iterator)
 {
-	int pulled = 0, pinned = 0, skip_for_load;
+	int loops = 0, pulled = 0, pinned = 0, skip_for_load;
 	struct task_struct *p;
 	long rem_load_move = max_load_move;
 
@@ -2251,10 +2260,10 @@
 	 */
 	p = iterator->start(iterator->arg);
 next:
-	if (!p)
+	if (!p || loops++ > sysctl_sched_nr_migrate)
 		goto out;
 	/*
-	 * To help distribute high priority tasks accross CPUs we don't
+	 * To help distribute high priority tasks across CPUs we don't
 	 * skip a task if it will be the highest priority task (i.e. smallest
 	 * prio value) on its new queue regardless of its load weight
 	 */
@@ -2271,8 +2280,7 @@
 	rem_load_move -= p->se.load.weight;
 
 	/*
-	 * We only want to steal up to the prescribed number of tasks
-	 * and the prescribed amount of weighted load.
+	 * We only want to steal up to the prescribed amount of weighted load.
 	 */
 	if (rem_load_move > 0) {
 		if (p->prio < *this_best_prio)
@@ -3335,13 +3343,9 @@
 {
 	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
 	cputime64_t tmp;
-	struct rq *rq = this_rq();
 
 	p->utime = cputime_add(p->utime, cputime);
 
-	if (p != rq->idle)
-		cpuacct_charge(p, cputime);
-
 	/* Add user time to cpustat. */
 	tmp = cputime_to_cputime64(cputime);
 	if (TASK_NICE(p) > 0)
@@ -3392,10 +3396,8 @@
 	struct rq *rq = this_rq();
 	cputime64_t tmp;
 
-	if (p->flags & PF_VCPU) {
-		account_guest_time(p, cputime);
-		return;
-	}
+	if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0))
+		return account_guest_time(p, cputime);
 
 	p->stime = cputime_add(p->stime, cputime);
 
@@ -3405,10 +3407,9 @@
 		cpustat->irq = cputime64_add(cpustat->irq, tmp);
 	else if (softirq_count())
 		cpustat->softirq = cputime64_add(cpustat->softirq, tmp);
-	else if (p != rq->idle) {
+	else if (p != rq->idle)
 		cpustat->system = cputime64_add(cpustat->system, tmp);
-		cpuacct_charge(p, cputime);
-	} else if (atomic_read(&rq->nr_iowait) > 0)
+	else if (atomic_read(&rq->nr_iowait) > 0)
 		cpustat->iowait = cputime64_add(cpustat->iowait, tmp);
 	else
 		cpustat->idle = cputime64_add(cpustat->idle, tmp);
@@ -3444,10 +3445,8 @@
 			cpustat->iowait = cputime64_add(cpustat->iowait, tmp);
 		else
 			cpustat->idle = cputime64_add(cpustat->idle, tmp);
-	} else {
+	} else
 		cpustat->steal = cputime64_add(cpustat->steal, tmp);
-		cpuacct_charge(p, -tmp);
-	}
 }
 
 /*
@@ -4992,6 +4991,32 @@
  */
 cpumask_t nohz_cpu_mask = CPU_MASK_NONE;
 
+/*
+ * Increase the granularity value when there are more CPUs,
+ * because with more CPUs the 'effective latency' as visible
+ * to users decreases. But the relationship is not linear,
+ * so pick a second-best guess by going with the log2 of the
+ * number of CPUs.
+ *
+ * This idea comes from the SD scheduler of Con Kolivas:
+ */
+static inline void sched_init_granularity(void)
+{
+	unsigned int factor = 1 + ilog2(num_online_cpus());
+	const unsigned long limit = 200000000;
+
+	sysctl_sched_min_granularity *= factor;
+	if (sysctl_sched_min_granularity > limit)
+		sysctl_sched_min_granularity = limit;
+
+	sysctl_sched_latency *= factor;
+	if (sysctl_sched_latency > limit)
+		sysctl_sched_latency = limit;
+
+	sysctl_sched_wakeup_granularity *= factor;
+	sysctl_sched_batch_wakeup_granularity *= factor;
+}
+
 #ifdef CONFIG_SMP
 /*
  * This is how migration works:
@@ -5257,23 +5282,9 @@
 }
 
 /*
- * activate_idle_task - move idle task to the _front_ of runqueue.
- */
-static void activate_idle_task(struct task_struct *p, struct rq *rq)
-{
-	update_rq_clock(rq);
-
-	if (p->state == TASK_UNINTERRUPTIBLE)
-		rq->nr_uninterruptible--;
-
-	enqueue_task(rq, p, 0);
-	inc_nr_running(p, rq);
-}
-
-/*
  * Schedules idle task to be the next runnable task on current CPU.
- * It does so by boosting its priority to highest possible and adding it to
- * the _front_ of the runqueue. Used by CPU offline code.
+ * It does so by boosting its priority to highest possible.
+ * Used by CPU offline code.
  */
 void sched_idle_next(void)
 {
@@ -5293,8 +5304,8 @@
 
 	__setscheduler(rq, p, SCHED_FIFO, MAX_RT_PRIO-1);
 
-	/* Add idle task to the _front_ of its priority queue: */
-	activate_idle_task(p, rq);
+	update_rq_clock(rq);
+	activate_task(rq, p, 0);
 
 	spin_unlock_irqrestore(&rq->lock, flags);
 }
@@ -5621,7 +5632,7 @@
 	.priority = 10
 };
 
-int __init migration_init(void)
+void __init migration_init(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err;
@@ -5631,8 +5642,6 @@
 	BUG_ON(err == NOTIFY_BAD);
 	migration_call(&migration_notifier, CPU_ONLINE, cpu);
 	register_cpu_notifier(&migration_notifier);
-
-	return 0;
 }
 #endif
 
@@ -6688,10 +6697,12 @@
 	/* Move init over to a non-isolated CPU */
 	if (set_cpus_allowed(current, non_isolated_cpus) < 0)
 		BUG();
+	sched_init_granularity();
 }
 #else
 void __init sched_init_smp(void)
 {
+	sched_init_granularity();
 }
 #endif /* CONFIG_SMP */
 
@@ -7068,8 +7079,10 @@
 
 	rq = task_rq_lock(tsk, &flags);
 
-	if (tsk->sched_class != &fair_sched_class)
+	if (tsk->sched_class != &fair_sched_class) {
+		set_task_cfs_rq(tsk, task_cpu(tsk));
 		goto done;
+	}
 
 	update_rq_clock(rq);
 
@@ -7082,7 +7095,7 @@
 			tsk->sched_class->put_prev_task(rq, tsk);
 	}
 
-	set_task_cfs_rq(tsk);
+	set_task_cfs_rq(tsk, task_cpu(tsk));
 
 	if (on_rq) {
 		if (unlikely(running))
@@ -7228,7 +7241,7 @@
 		spin_unlock_irqrestore(&cpu_rq(i)->lock, flags);
 	}
 	/* Convert from ns to ms */
-	do_div(res, 1000000);
+	do_div(res, NSEC_PER_MSEC);
 
 	return res;
 }
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 415e5c3..ca198a7 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -211,7 +211,7 @@
 #define PN(x) \
 	SEQ_printf(m, "  .%-40s: %Ld.%06ld\n", #x, SPLIT_NS(x))
 	PN(sysctl_sched_latency);
-	PN(sysctl_sched_nr_latency);
+	PN(sysctl_sched_min_granularity);
 	PN(sysctl_sched_wakeup_granularity);
 	PN(sysctl_sched_batch_wakeup_granularity);
 	PN(sysctl_sched_child_runs_first);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 01859f6..ee00da2 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -22,7 +22,7 @@
 
 /*
  * Targeted preemption latency for CPU-bound tasks:
- * (default: 20ms, units: nanoseconds)
+ * (default: 20ms * ilog(ncpus), units: nanoseconds)
  *
  * NOTE: this latency value is not the same as the concept of
  * 'timeslice length' - timeslices in CFS are of variable length
@@ -32,7 +32,18 @@
  * (to see the precise effective timeslice length of your workload,
  *  run vmstat and monitor the context-switches (cs) field)
  */
-const_debug unsigned int sysctl_sched_latency = 20000000ULL;
+unsigned int sysctl_sched_latency = 20000000ULL;
+
+/*
+ * Minimal preemption granularity for CPU-bound tasks:
+ * (default: 1 msec * ilog(ncpus), units: nanoseconds)
+ */
+unsigned int sysctl_sched_min_granularity = 1000000ULL;
+
+/*
+ * is kept at sysctl_sched_latency / sysctl_sched_min_granularity
+ */
+static unsigned int sched_nr_latency = 20;
 
 /*
  * After fork, child runs first. (default) If set to 0 then
@@ -41,12 +52,6 @@
 const_debug unsigned int sysctl_sched_child_runs_first = 1;
 
 /*
- * Minimal preemption granularity for CPU-bound tasks:
- * (default: 2 msec, units: nanoseconds)
- */
-const_debug unsigned int sysctl_sched_nr_latency = 20;
-
-/*
  * sys_sched_yield() compat mode
  *
  * This option switches the agressive yield implementation of the
@@ -56,23 +61,23 @@
 
 /*
  * SCHED_BATCH wake-up granularity.
- * (default: 10 msec, units: nanoseconds)
+ * (default: 10 msec * ilog(ncpus), units: nanoseconds)
  *
  * This option delays the preemption effects of decoupled workloads
  * and reduces their over-scheduling. Synchronous workloads will still
  * have immediate wakeup/sleep latencies.
  */
-const_debug unsigned int sysctl_sched_batch_wakeup_granularity = 10000000UL;
+unsigned int sysctl_sched_batch_wakeup_granularity = 10000000UL;
 
 /*
  * SCHED_OTHER wake-up granularity.
- * (default: 10 msec, units: nanoseconds)
+ * (default: 10 msec * ilog(ncpus), units: nanoseconds)
  *
  * This option delays the preemption effects of decoupled workloads
  * and reduces their over-scheduling. Synchronous workloads will still
  * have immediate wakeup/sleep latencies.
  */
-const_debug unsigned int sysctl_sched_wakeup_granularity = 10000000UL;
+unsigned int sysctl_sched_wakeup_granularity = 10000000UL;
 
 const_debug unsigned int sysctl_sched_migration_cost = 500000UL;
 
@@ -212,6 +217,22 @@
  * Scheduling class statistics methods:
  */
 
+#ifdef CONFIG_SCHED_DEBUG
+int sched_nr_latency_handler(struct ctl_table *table, int write,
+		struct file *filp, void __user *buffer, size_t *lenp,
+		loff_t *ppos)
+{
+	int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+
+	if (ret || !write)
+		return ret;
+
+	sched_nr_latency = DIV_ROUND_UP(sysctl_sched_latency,
+					sysctl_sched_min_granularity);
+
+	return 0;
+}
+#endif
 
 /*
  * The idea is to set a period in which each task runs once.
@@ -224,7 +245,7 @@
 static u64 __sched_period(unsigned long nr_running)
 {
 	u64 period = sysctl_sched_latency;
-	unsigned long nr_latency = sysctl_sched_nr_latency;
+	unsigned long nr_latency = sched_nr_latency;
 
 	if (unlikely(nr_running > nr_latency)) {
 		period *= nr_running;
@@ -259,6 +280,7 @@
 {
 	u64 vslice = __sched_period(nr_running);
 
+	vslice *= NICE_0_LOAD;
 	do_div(vslice, rq_weight);
 
 	return vslice;
@@ -472,19 +494,26 @@
 	} else if (sched_feat(APPROX_AVG) && cfs_rq->nr_running)
 		vruntime += sched_vslice(cfs_rq)/2;
 
+	/*
+	 * The 'current' period is already promised to the current tasks,
+	 * however the extra weight of the new task will slow them down a
+	 * little, place the new task so that it fits in the slot that
+	 * stays open at the end.
+	 */
 	if (initial && sched_feat(START_DEBIT))
 		vruntime += sched_vslice_add(cfs_rq, se);
 
 	if (!initial) {
+		/* sleeps upto a single latency don't count. */
 		if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se) &&
 				task_of(se)->policy != SCHED_BATCH)
 			vruntime -= sysctl_sched_latency;
 
-		vruntime = max_t(s64, vruntime, se->vruntime);
+		/* ensure we never gain time by being placed backwards. */
+		vruntime = max_vruntime(se->vruntime, vruntime);
 	}
 
 	se->vruntime = vruntime;
-
 }
 
 static void
@@ -517,7 +546,6 @@
 
 	update_stats_dequeue(cfs_rq, se);
 	if (sleep) {
-		se->peer_preempt = 0;
 #ifdef CONFIG_SCHEDSTATS
 		if (entity_is_task(se)) {
 			struct task_struct *tsk = task_of(se);
@@ -545,10 +573,8 @@
 
 	ideal_runtime = sched_slice(cfs_rq, curr);
 	delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime;
-	if (delta_exec > ideal_runtime ||
-			(sched_feat(PREEMPT_RESTRICT) && curr->peer_preempt))
+	if (delta_exec > ideal_runtime)
 		resched_task(rq_of(cfs_rq)->curr);
-	curr->peer_preempt = 0;
 }
 
 static void
@@ -811,7 +837,7 @@
 	struct task_struct *curr = rq->curr;
 	struct cfs_rq *cfs_rq = task_cfs_rq(curr);
 	struct sched_entity *se = &curr->se, *pse = &p->se;
-	s64 delta, gran;
+	unsigned long gran;
 
 	if (unlikely(rt_prio(p->prio))) {
 		update_rq_clock(rq);
@@ -826,24 +852,20 @@
 	if (unlikely(p->policy == SCHED_BATCH))
 		return;
 
-	if (sched_feat(WAKEUP_PREEMPT)) {
-		while (!is_same_group(se, pse)) {
-			se = parent_entity(se);
-			pse = parent_entity(pse);
-		}
+	if (!sched_feat(WAKEUP_PREEMPT))
+		return;
 
-		delta = se->vruntime - pse->vruntime;
-		gran = sysctl_sched_wakeup_granularity;
-		if (unlikely(se->load.weight != NICE_0_LOAD))
-			gran = calc_delta_fair(gran, &se->load);
-
-		if (delta > gran) {
-			int now = !sched_feat(PREEMPT_RESTRICT);
-
-			if (now || p->prio < curr->prio || !se->peer_preempt++)
-				resched_task(curr);
-		}
+	while (!is_same_group(se, pse)) {
+		se = parent_entity(se);
+		pse = parent_entity(pse);
 	}
+
+	gran = sysctl_sched_wakeup_granularity;
+	if (unlikely(se->load.weight != NICE_0_LOAD))
+		gran = calc_delta_fair(gran, &se->load);
+
+	if (pse->vruntime + gran < se->vruntime)
+		resched_task(curr);
 }
 
 static struct task_struct *pick_next_task_fair(struct rq *rq)
@@ -1045,8 +1067,9 @@
 	update_curr(cfs_rq);
 	place_entity(cfs_rq, se, 1);
 
+	/* 'curr' will be NULL if the child belongs to a different group */
 	if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) &&
-			curr->vruntime < se->vruntime) {
+			curr && curr->vruntime < se->vruntime) {
 		/*
 		 * Upon rescheduling, sched_class::put_prev_task() will place
 		 * 'current' within the tree based on its new key value.
@@ -1054,7 +1077,6 @@
 		swap(curr->vruntime, se->vruntime);
 	}
 
-	se->peer_preempt = 0;
 	enqueue_task_fair(rq, p, 0);
 	resched_task(rq->curr);
 }
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index ef1a7df..630178e 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -127,7 +127,7 @@
 # define schedstat_set(var, val)	do { } while (0)
 #endif
 
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 /*
  * Called when a process is dequeued from the active array and given
  * the cpu.  We should note that with the exception of interactive
@@ -155,7 +155,7 @@
  */
 static void sched_info_arrive(struct task_struct *t)
 {
-	unsigned long long now = sched_clock(), delta = 0;
+	unsigned long long now = task_rq(t)->clock, delta = 0;
 
 	if (t->sched_info.last_queued)
 		delta = now - t->sched_info.last_queued;
@@ -186,7 +186,7 @@
 {
 	if (unlikely(sched_info_on()))
 		if (!t->sched_info.last_queued)
-			t->sched_info.last_queued = sched_clock();
+			t->sched_info.last_queued = task_rq(t)->clock;
 }
 
 /*
@@ -195,7 +195,8 @@
  */
 static inline void sched_info_depart(struct task_struct *t)
 {
-	unsigned long long delta = sched_clock() - t->sched_info.last_arrival;
+	unsigned long long delta = task_rq(t)->clock -
+					t->sched_info.last_arrival;
 
 	t->sched_info.cpu_time += delta;
 	rq_sched_info_depart(task_rq(t), delta);
@@ -231,5 +232,5 @@
 #else
 #define sched_info_queued(t)		do { } while (0)
 #define sched_info_switch(t, next)	do { } while (0)
-#endif /* CONFIG_SCHEDSTATS */
+#endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */
 
diff --git a/kernel/signal.c b/kernel/signal.c
index 909a0cc..afa4f78 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -55,7 +55,7 @@
 	 * signal handler may change by the time it is
 	 * unblocked.
 	 */
-	if (sigismember(&t->blocked, sig))
+	if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
 		return 0;
 
 	/* Is it explicitly or implicitly ignored? */
diff --git a/kernel/sys.c b/kernel/sys.c
index 304b541..d1fe71e 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1750,7 +1750,7 @@
 }
 
 asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
-	   		   struct getcpu_cache __user *cache)
+			   struct getcpu_cache __user *unused)
 {
 	int err = 0;
 	int cpu = raw_smp_processor_id();
@@ -1758,24 +1758,6 @@
 		err |= put_user(cpu, cpup);
 	if (nodep)
 		err |= put_user(cpu_to_node(cpu), nodep);
-	if (cache) {
-		/*
-		 * The cache is not needed for this implementation,
-		 * but make sure user programs pass something
-		 * valid. vsyscall implementations can instead make
-		 * good use of the cache. Only use t0 and t1 because
-		 * these are available in both 32bit and 64bit ABI (no
-		 * need for a compat_getcpu). 32bit has enough
-		 * padding
-		 */
-		unsigned long t0, t1;
-		get_user(t0, &cache->blob[0]);
-		get_user(t1, &cache->blob[1]);
-		t0++;
-		t1++;
-		put_user(t0, &cache->blob[0]);
-		put_user(t1, &cache->blob[1]);
-	}
 	return err ? -EFAULT : 0;
 }
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 3b4efbe..0deed82 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -226,20 +226,23 @@
 
 #ifdef CONFIG_SCHED_DEBUG
 static unsigned long min_sched_granularity_ns = 100000;		/* 100 usecs */
-static unsigned long max_sched_granularity_ns = 1000000000;	/* 1 second */
+static unsigned long max_sched_granularity_ns = NSEC_PER_SEC;	/* 1 second */
 static unsigned long min_wakeup_granularity_ns;			/* 0 usecs */
-static unsigned long max_wakeup_granularity_ns = 1000000000;	/* 1 second */
+static unsigned long max_wakeup_granularity_ns = NSEC_PER_SEC;	/* 1 second */
 #endif
 
 static struct ctl_table kern_table[] = {
 #ifdef CONFIG_SCHED_DEBUG
 	{
 		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "sched_nr_latency",
-		.data		= &sysctl_sched_nr_latency,
+		.procname	= "sched_min_granularity_ns",
+		.data		= &sysctl_sched_min_granularity,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= &sched_nr_latency_handler,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_sched_granularity_ns,
+		.extra2		= &max_sched_granularity_ns,
 	},
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -247,7 +250,7 @@
 		.data		= &sysctl_sched_latency,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= &sched_nr_latency_handler,
 		.strategy	= &sysctl_intvec,
 		.extra1		= &min_sched_granularity_ns,
 		.extra2		= &max_sched_granularity_ns,
@@ -298,6 +301,14 @@
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "sched_nr_migrate",
+		.data		= &sysctl_sched_nr_migrate,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -2609,6 +2620,10 @@
 	int name[CTL_MAXNAME];
 	int i;
 
+	/* Check args->nlen. */
+	if (args->nlen < 0 || args->nlen > CTL_MAXNAME)
+		return -ENOTDIR;
+
 	/* Read in the sysctl name for better debug message logging */
 	for (i = 0; i < args->nlen; i++)
 		if (get_user(name[i], args->name + i))
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index ed6fe51..4abc6d2 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -738,7 +738,7 @@
 	{ NET_ROSE,		"rose",		trans_net_rose_table },
 	{ NET_IPV6,		"ipv6",		trans_net_ipv6_table },
 	{ NET_X25,		"x25",		trans_net_x25_table },
-	{ NET_TR,		"tr",		trans_net_tr_table },
+	{ NET_TR,		"token-ring",	trans_net_tr_table },
 	{ NET_DECNET,		"decnet",	trans_net_decnet_table },
 	/*  NET_ECONET not used */
 	{ NET_SCTP,		"sctp",		trans_net_sctp_table },
@@ -1432,6 +1432,7 @@
 		printk(KERN_ERR "sysctl table check failed: ");
 		sysctl_print_path(table);
 		printk(" %s\n", *fail);
+		dump_stack();
 	}
 	*fail = str;
 }
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 354e74b..07e86a8 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -398,31 +398,31 @@
 
 	fd = nla_get_u32(info->attrs[CGROUPSTATS_CMD_ATTR_FD]);
 	file = fget_light(fd, &fput_needed);
-	if (file) {
-		size = nla_total_size(sizeof(struct cgroupstats));
+	if (!file)
+		return 0;
 
-		rc = prepare_reply(info, CGROUPSTATS_CMD_NEW, &rep_skb,
-					size);
-		if (rc < 0)
-			goto err;
+	size = nla_total_size(sizeof(struct cgroupstats));
 
-		na = nla_reserve(rep_skb, CGROUPSTATS_TYPE_CGROUP_STATS,
-					sizeof(struct cgroupstats));
-		stats = nla_data(na);
-		memset(stats, 0, sizeof(*stats));
+	rc = prepare_reply(info, CGROUPSTATS_CMD_NEW, &rep_skb,
+				size);
+	if (rc < 0)
+		goto err;
 
-		rc = cgroupstats_build(stats, file->f_dentry);
-		if (rc < 0)
-			goto err;
+	na = nla_reserve(rep_skb, CGROUPSTATS_TYPE_CGROUP_STATS,
+				sizeof(struct cgroupstats));
+	stats = nla_data(na);
+	memset(stats, 0, sizeof(*stats));
 
-		fput_light(file, fput_needed);
-		return send_reply(rep_skb, info->snd_pid);
+	rc = cgroupstats_build(stats, file->f_dentry);
+	if (rc < 0) {
+		nlmsg_free(rep_skb);
+		goto err;
 	}
 
+	rc = send_reply(rep_skb, info->snd_pid);
+
 err:
-	if (file)
-		fput_light(file, fput_needed);
-	nlmsg_free(rep_skb);
+	fput_light(file, fput_needed);
 	return rc;
 }
 
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index de6a2d6..14a2ecf 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -205,7 +205,7 @@
 		return;
 
 	getnstimeofday(&now);
-	if (abs(xtime.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
+	if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
 		fail = update_persistent_clock(now);
 
 	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 8cfb8b2..aa82d7b 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -508,7 +508,7 @@
 }
 
 /**
- * tick_broadcast_setup_highres - setup the broadcast device for highres
+ * tick_broadcast_setup_oneshot - setup the broadcast device
  */
 void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 5997456..27a2338 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -321,7 +321,7 @@
 }
 
 /**
- * nohz_restart_sched_tick - restart the idle tick from the idle task
+ * tick_nohz_restart_sched_tick - restart the idle tick from the idle task
  *
  * Restart the idle tick when the CPU is woken up from idle
  */
diff --git a/kernel/timer.c b/kernel/timer.c
index fb4e67d..a05817c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -790,7 +790,7 @@
 }
 
 /**
- * next_timer_interrupt - return the jiffy of the next pending timer
+ * get_next_timer_interrupt - return the jiffy of the next pending timer
  * @now: current time (in jiffies)
  */
 unsigned long get_next_timer_interrupt(unsigned long now)
@@ -817,6 +817,19 @@
 
 #endif
 
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+void account_process_tick(struct task_struct *p, int user_tick)
+{
+	if (user_tick) {
+		account_user_time(p, jiffies_to_cputime(1));
+		account_user_time_scaled(p, jiffies_to_cputime(1));
+	} else {
+		account_system_time(p, HARDIRQ_OFFSET, jiffies_to_cputime(1));
+		account_system_time_scaled(p, jiffies_to_cputime(1));
+	}
+}
+#endif
+
 /*
  * Called from the timer interrupt handler to charge one tick to the current
  * process.  user_tick is 1 if the tick is user time, 0 for system.
@@ -827,13 +840,7 @@
 	int cpu = smp_processor_id();
 
 	/* Note: this timer irq context must be accounted for as well. */
-	if (user_tick) {
-		account_user_time(p, jiffies_to_cputime(1));
-		account_user_time_scaled(p, jiffies_to_cputime(1));
-	} else {
-		account_system_time(p, HARDIRQ_OFFSET, jiffies_to_cputime(1));
-		account_system_time_scaled(p, jiffies_to_cputime(1));
-	}
+	account_process_tick(p, user_tick);
 	run_local_timers();
 	if (rcu_pending(cpu))
 		rcu_check_callbacks(cpu, user_tick);
diff --git a/lib/Makefile b/lib/Makefile
index 3a0983b..b6793ed 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -4,7 +4,7 @@
 
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o \
-	 idr.o int_sqrt.o bitmap.o extable.o prio_tree.o \
+	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
 	 proportions.o prio_heap.o
 
@@ -14,7 +14,7 @@
 lib-y	+= kobject.o kref.o klist.o
 
 obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
-	 bust_spinlocks.o hexdump.o kasprintf.o
+	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o
 
 ifeq ($(CONFIG_DEBUG_KOBJECT),y)
 CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 26ebafa..2c9242e 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -469,6 +469,10 @@
 	/* current bit is 'cur', most recently seen range is [rbot, rtop] */
 	int cur, rbot, rtop;
 
+	if (buflen == 0)
+		return 0;
+	buf[0] = 0;
+
 	rbot = cur = find_first_bit(maskp, nmaskbits);
 	while (cur < nmaskbits) {
 		rtop = cur;
diff --git a/lib/libcrc32c.c b/lib/libcrc32c.c
index 802f11f..b5c3287 100644
--- a/lib/libcrc32c.c
+++ b/lib/libcrc32c.c
@@ -33,7 +33,6 @@
 #include <linux/crc32c.h>
 #include <linux/compiler.h>
 #include <linux/module.h>
-#include <asm/byteorder.h>
 
 MODULE_AUTHOR("Clay Haapala <chaapala@cisco.com>");
 MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations");
@@ -161,15 +160,13 @@
  */
 
 u32 __pure
-crc32c_le(u32 seed, unsigned char const *data, size_t length)
+crc32c_le(u32 crc, unsigned char const *data, size_t length)
 {
-	u32 crc = __cpu_to_le32(seed);
-	
 	while (length--)
 		crc =
 		    crc32c_table[(crc ^ *data++) & 0xFFL] ^ (crc >> 8);
 
-	return __le32_to_cpu(crc);
+	return crc;
 }
 
 #endif	/* CRC_LE_BITS == 8 */
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 8b809ec..6121b57 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -116,7 +116,9 @@
 static void free_huge_page(struct page *page)
 {
 	int nid = page_to_nid(page);
+	struct address_space *mapping;
 
+	mapping = (struct address_space *) page_private(page);
 	BUG_ON(page_count(page));
 	INIT_LIST_HEAD(&page->lru);
 
@@ -129,6 +131,9 @@
 		enqueue_huge_page(page);
 	}
 	spin_unlock(&hugetlb_lock);
+	if (mapping)
+		hugetlb_put_quota(mapping, 1);
+	set_page_private(page, 0);
 }
 
 /*
@@ -323,7 +328,7 @@
  * allocated to satisfy the reservation must be explicitly freed if they were
  * never used.
  */
-void return_unused_surplus_pages(unsigned long unused_resv_pages)
+static void return_unused_surplus_pages(unsigned long unused_resv_pages)
 {
 	static int nid = -1;
 	struct page *page;
@@ -353,35 +358,50 @@
 	}
 }
 
+
+static struct page *alloc_huge_page_shared(struct vm_area_struct *vma,
+						unsigned long addr)
+{
+	struct page *page;
+
+	spin_lock(&hugetlb_lock);
+	page = dequeue_huge_page(vma, addr);
+	spin_unlock(&hugetlb_lock);
+	return page ? page : ERR_PTR(-VM_FAULT_OOM);
+}
+
+static struct page *alloc_huge_page_private(struct vm_area_struct *vma,
+						unsigned long addr)
+{
+	struct page *page = NULL;
+
+	if (hugetlb_get_quota(vma->vm_file->f_mapping, 1))
+		return ERR_PTR(-VM_FAULT_SIGBUS);
+
+	spin_lock(&hugetlb_lock);
+	if (free_huge_pages > resv_huge_pages)
+		page = dequeue_huge_page(vma, addr);
+	spin_unlock(&hugetlb_lock);
+	if (!page)
+		page = alloc_buddy_huge_page(vma, addr);
+	return page ? page : ERR_PTR(-VM_FAULT_OOM);
+}
+
 static struct page *alloc_huge_page(struct vm_area_struct *vma,
 				    unsigned long addr)
 {
-	struct page *page = NULL;
-	int use_reserved_page = vma->vm_flags & VM_MAYSHARE;
+	struct page *page;
+	struct address_space *mapping = vma->vm_file->f_mapping;
 
-	spin_lock(&hugetlb_lock);
-	if (!use_reserved_page && (free_huge_pages <= resv_huge_pages))
-		goto fail;
+	if (vma->vm_flags & VM_MAYSHARE)
+		page = alloc_huge_page_shared(vma, addr);
+	else
+		page = alloc_huge_page_private(vma, addr);
 
-	page = dequeue_huge_page(vma, addr);
-	if (!page)
-		goto fail;
-
-	spin_unlock(&hugetlb_lock);
-	set_page_refcounted(page);
-	return page;
-
-fail:
-	spin_unlock(&hugetlb_lock);
-
-	/*
-	 * Private mappings do not use reserved huge pages so the allocation
-	 * may have failed due to an undersized hugetlb pool.  Try to grab a
-	 * surplus huge page from the buddy allocator.
-	 */
-	if (!use_reserved_page)
-		page = alloc_buddy_huge_page(vma, addr);
-
+	if (!IS_ERR(page)) {
+		set_page_refcounted(page);
+		set_page_private(page, (unsigned long) mapping);
+	}
 	return page;
 }
 
@@ -726,9 +746,9 @@
 	page_cache_get(old_page);
 	new_page = alloc_huge_page(vma, address);
 
-	if (!new_page) {
+	if (IS_ERR(new_page)) {
 		page_cache_release(old_page);
-		return VM_FAULT_OOM;
+		return -PTR_ERR(new_page);
 	}
 
 	spin_unlock(&mm->page_table_lock);
@@ -772,27 +792,28 @@
 		size = i_size_read(mapping->host) >> HPAGE_SHIFT;
 		if (idx >= size)
 			goto out;
-		if (hugetlb_get_quota(mapping))
-			goto out;
 		page = alloc_huge_page(vma, address);
-		if (!page) {
-			hugetlb_put_quota(mapping);
-			ret = VM_FAULT_OOM;
+		if (IS_ERR(page)) {
+			ret = -PTR_ERR(page);
 			goto out;
 		}
 		clear_huge_page(page, address);
 
 		if (vma->vm_flags & VM_SHARED) {
 			int err;
+			struct inode *inode = mapping->host;
 
 			err = add_to_page_cache(page, mapping, idx, GFP_KERNEL);
 			if (err) {
 				put_page(page);
-				hugetlb_put_quota(mapping);
 				if (err == -EEXIST)
 					goto retry;
 				goto out;
 			}
+
+			spin_lock(&inode->i_lock);
+			inode->i_blocks += BLOCKS_PER_HUGEPAGE;
+			spin_unlock(&inode->i_lock);
 		} else
 			lock_page(page);
 	}
@@ -822,7 +843,6 @@
 
 backout:
 	spin_unlock(&mm->page_table_lock);
-	hugetlb_put_quota(mapping);
 	unlock_page(page);
 	put_page(page);
 	goto out;
@@ -868,7 +888,8 @@
 
 int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			struct page **pages, struct vm_area_struct **vmas,
-			unsigned long *position, int *length, int i)
+			unsigned long *position, int *length, int i,
+			int write)
 {
 	unsigned long pfn_offset;
 	unsigned long vaddr = *position;
@@ -890,7 +911,7 @@
 			int ret;
 
 			spin_unlock(&mm->page_table_lock);
-			ret = hugetlb_fault(mm, vma, vaddr, 0);
+			ret = hugetlb_fault(mm, vma, vaddr, write);
 			spin_lock(&mm->page_table_lock);
 			if (!(ret & VM_FAULT_ERROR))
 				continue;
@@ -1132,6 +1153,8 @@
 	if (chg < 0)
 		return chg;
 
+	if (hugetlb_get_quota(inode->i_mapping, chg))
+		return -ENOSPC;
 	ret = hugetlb_acct_memory(chg);
 	if (ret < 0)
 		return ret;
@@ -1142,5 +1165,11 @@
 void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed)
 {
 	long chg = region_truncate(&inode->i_mapping->private_list, offset);
-	hugetlb_acct_memory(freed - chg);
+
+	spin_lock(&inode->i_lock);
+	inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+	spin_unlock(&inode->i_lock);
+
+	hugetlb_put_quota(inode->i_mapping, (chg - freed));
+	hugetlb_acct_memory(-(chg - freed));
 }
diff --git a/mm/memory.c b/mm/memory.c
index eefd5b6..4bf0b6d 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1036,7 +1036,7 @@
 
 		if (is_vm_hugetlb_page(vma)) {
 			i = follow_hugetlb_page(mm, vma, pages, vmas,
-						&start, &len, i);
+						&start, &len, i, write);
 			continue;
 		}
 
@@ -2084,9 +2084,9 @@
 		count_vm_event(PGMAJFAULT);
 	}
 
-	delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 	mark_page_accessed(page);
 	lock_page(page);
+	delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 
 	/*
 	 * Back out if somebody else already faulted in this pte.
@@ -2748,4 +2748,3 @@
 
 	return buf - old_buf;
 }
-EXPORT_SYMBOL_GPL(access_process_vm);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 3a47871..9512a54 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -39,7 +39,7 @@
 	res->name = "System RAM";
 	res->start = start;
 	res->end = start + size - 1;
-	res->flags = IORESOURCE_MEM;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&iomem_resource, res) < 0) {
 		printk("System RAM resource %llx - %llx cannot be added\n",
 		(unsigned long long)res->start, (unsigned long long)res->end);
@@ -574,8 +574,8 @@
 	/* Ok, all of our target is islaoted.
 	   We cannot do rollback at this point. */
 	offline_isolated_pages(start_pfn, end_pfn);
-	/* reset pagetype flags */
-	start_isolate_page_range(start_pfn, end_pfn);
+	/* reset pagetype flags and makes migrate type to be MOVABLE */
+	undo_isolate_page_range(start_pfn, end_pfn);
 	/* removal success */
 	zone->present_pages -= offlined_pages;
 	zone->zone_pgdat->node_present_pages -= offlined_pages;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index c1592a9..83c69f8 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -722,12 +722,29 @@
 
 }
 
+/*
+ * Allocate a new page for page migration based on vma policy.
+ * Start assuming that page is mapped by vma pointed to by @private.
+ * Search forward from there, if not.  N.B., this assumes that the
+ * list of pages handed to migrate_pages()--which is how we get here--
+ * is in virtual address order.
+ */
 static struct page *new_vma_page(struct page *page, unsigned long private, int **x)
 {
 	struct vm_area_struct *vma = (struct vm_area_struct *)private;
+	unsigned long uninitialized_var(address);
 
-	return alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma,
-					page_address_in_vma(page, vma));
+	while (vma) {
+		address = page_address_in_vma(page, vma);
+		if (address != -EFAULT)
+			break;
+		vma = vma->vm_next;
+	}
+
+	/*
+	 * if !vma, alloc_page_vma() will use task or system default policy
+	 */
+	return alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
 }
 #else
 
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 838a5e3..d55cfca 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -297,20 +297,12 @@
 {
 	int background_ratio;		/* Percentages */
 	int dirty_ratio;
-	int unmapped_ratio;
 	long background;
 	long dirty;
 	unsigned long available_memory = determine_dirtyable_memory();
 	struct task_struct *tsk;
 
-	unmapped_ratio = 100 - ((global_page_state(NR_FILE_MAPPED) +
-				global_page_state(NR_ANON_PAGES)) * 100) /
-					available_memory;
-
 	dirty_ratio = vm_dirty_ratio;
-	if (dirty_ratio > unmapped_ratio / 2)
-		dirty_ratio = unmapped_ratio / 2;
-
 	if (dirty_ratio < 5)
 		dirty_ratio = 5;
 
@@ -355,8 +347,8 @@
  */
 static void balance_dirty_pages(struct address_space *mapping)
 {
-	long bdi_nr_reclaimable;
-	long bdi_nr_writeback;
+	long nr_reclaimable, bdi_nr_reclaimable;
+	long nr_writeback, bdi_nr_writeback;
 	long background_thresh;
 	long dirty_thresh;
 	long bdi_thresh;
@@ -376,11 +368,26 @@
 
 		get_dirty_limits(&background_thresh, &dirty_thresh,
 				&bdi_thresh, bdi);
+
+		nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
+					global_page_state(NR_UNSTABLE_NFS);
+		nr_writeback = global_page_state(NR_WRITEBACK);
+
 		bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
 		bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
+
 		if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
 			break;
 
+		/*
+		 * Throttle it only when the background writeback cannot
+		 * catch-up. This avoids (excessively) small writeouts
+		 * when the bdi limits are ramping up.
+		 */
+		if (nr_reclaimable + nr_writeback <
+				(background_thresh + dirty_thresh) / 2)
+			break;
+
 		if (!bdi->dirty_exceeded)
 			bdi->dirty_exceeded = 1;
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index da69d83..12376ae 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -749,23 +749,6 @@
 	return move_freepages(zone, start_page, end_page, migratetype);
 }
 
-/* Return the page with the lowest PFN in the list */
-static struct page *min_page(struct list_head *list)
-{
-	unsigned long min_pfn = -1UL;
-	struct page *min_page = NULL, *page;;
-
-	list_for_each_entry(page, list, lru) {
-		unsigned long pfn = page_to_pfn(page);
-		if (pfn < min_pfn) {
-			min_pfn = pfn;
-			min_page = page;
-		}
-	}
-
-	return min_page;
-}
-
 /* Remove an element from the buddy allocator from the fallback list */
 static struct page *__rmqueue_fallback(struct zone *zone, int order,
 						int start_migratetype)
@@ -789,11 +772,8 @@
 			if (list_empty(&area->free_list[migratetype]))
 				continue;
 
-			/* Bias kernel allocations towards low pfns */
 			page = list_entry(area->free_list[migratetype].next,
 					struct page, lru);
-			if (unlikely(start_migratetype != MIGRATE_MOVABLE))
-				page = min_page(&area->free_list[migratetype]);
 			area->nr_free--;
 
 			/*
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 8f92a29..3444b58 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -55,7 +55,7 @@
 	return 0;
 undo:
 	for (pfn = start_pfn;
-	     pfn <= undo_pfn;
+	     pfn < undo_pfn;
 	     pfn += pageblock_nr_pages)
 		unset_migratetype_isolate(pfn_to_page(pfn));
 
@@ -76,7 +76,7 @@
 	     pfn < end_pfn;
 	     pfn += pageblock_nr_pages) {
 		page = __first_valid_page(pfn, pageblock_nr_pages);
-		if (!page || get_pageblock_flags(page) != MIGRATE_ISOLATE)
+		if (!page || get_pageblock_migratetype(page) != MIGRATE_ISOLATE)
 			continue;
 		unset_migratetype_isolate(page);
 	}
@@ -126,7 +126,7 @@
 	 */
 	for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) {
 		page = __first_valid_page(pfn, pageblock_nr_pages);
-		if (page && get_pageblock_flags(page) != MIGRATE_ISOLATE)
+		if (page && get_pageblock_migratetype(page) != MIGRATE_ISOLATE)
 			break;
 	}
 	if (pfn < end_pfn)
diff --git a/mm/rmap.c b/mm/rmap.c
index 8990f90..dc3be5f 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -183,7 +183,9 @@
 }
 
 /*
- * At what user virtual address is page expected in vma?
+ * At what user virtual address is page expected in @vma?
+ * Returns virtual address or -EFAULT if page's index/offset is not
+ * within the range mapped the @vma.
  */
 static inline unsigned long
 vma_address(struct page *page, struct vm_area_struct *vma)
@@ -193,8 +195,7 @@
 
 	address = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
 	if (unlikely(address < vma->vm_start || address >= vma->vm_end)) {
-		/* page should be within any vma from prio_tree_next */
-		BUG_ON(!PageAnon(page));
+		/* page should be within @vma mapping range */
 		return -EFAULT;
 	}
 	return address;
diff --git a/mm/slab.c b/mm/slab.c
index cfa6be4..c31cd36 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1043,7 +1043,7 @@
 			}
 			ac_ptr[i] = alloc_arraycache(node, limit, 0xbaadf00d);
 			if (!ac_ptr[i]) {
-				for (i--; i <= 0; i--)
+				for (i--; i >= 0; i--)
 					kfree(ac_ptr[i]);
 				kfree(ac_ptr);
 				return NULL;
diff --git a/mm/slob.c b/mm/slob.c
index 5bc2ceb..08a9bd9 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -321,7 +321,8 @@
 		/* Improve fragment distribution and reduce our average
 		 * search time by starting our next search here. (see
 		 * Knuth vol 1, sec 2.5, pg 449) */
-		if (free_slob_pages.next != prev->next)
+		if (prev != free_slob_pages.prev &&
+				free_slob_pages.next != prev->next)
 			list_move_tail(&free_slob_pages, prev->next);
 		break;
 	}
diff --git a/mm/slub.c b/mm/slub.c
index bcdb2c8..9acb413 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1080,7 +1080,6 @@
 	struct page *page;
 	struct kmem_cache_node *n;
 	void *start;
-	void *end;
 	void *last;
 	void *p;
 
@@ -1101,7 +1100,6 @@
 		SetSlabDebug(page);
 
 	start = page_address(page);
-	end = start + s->objects * s->size;
 
 	if (unlikely(s->flags & SLAB_POISON))
 		memset(start, POISON_INUSE, PAGE_SIZE << s->order);
@@ -1511,26 +1509,8 @@
 
 	if (new) {
 		c = get_cpu_slab(s, smp_processor_id());
-		if (c->page) {
-			/*
-			 * Someone else populated the cpu_slab while we
-			 * enabled interrupts, or we have gotten scheduled
-			 * on another cpu. The page may not be on the
-			 * requested node even if __GFP_THISNODE was
-			 * specified. So we need to recheck.
-			 */
-			if (node_match(c, node)) {
-				/*
-				 * Current cpuslab is acceptable and we
-				 * want the current one since its cache hot
-				 */
-				discard_slab(s, new);
-				slab_lock(c->page);
-				goto load_freelist;
-			}
-			/* New slab does not fit our expectations */
+		if (c->page)
 			flush_slab(s, c);
-		}
 		slab_lock(new);
 		SetSlabFrozen(new);
 		c->page = new;
diff --git a/mm/util.c b/mm/util.c
index 5f64026..8f18683 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -95,8 +95,8 @@
 		return (void *)p;
 
 	ret = kmalloc_track_caller(new_size, flags);
-	if (ret) {
-		memcpy(ret, p, min(new_size, ks));
+	if (ret && p) {
+		memcpy(ret, p, ks);
 		kfree(p);
 	}
 	return ret;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 4651bf1..e8d846f 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -803,7 +803,7 @@
 		sysctl_stat_interval);
 }
 
-static void __devinit start_cpu_timer(int cpu)
+static void __cpuinit start_cpu_timer(int cpu)
 {
 	struct delayed_work *vmstat_work = &per_cpu(vmstat_work, cpu);
 
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 3fe4fc8..6567213 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -376,6 +376,7 @@
 	new_dev->init = vlan_dev_init;
 	new_dev->open = vlan_dev_open;
 	new_dev->stop = vlan_dev_stop;
+	new_dev->set_mac_address = vlan_set_mac_address;
 	new_dev->set_multicast_list = vlan_dev_set_multicast_list;
 	new_dev->change_rx_flags = vlan_change_rx_flags;
 	new_dev->destructor = free_netdev;
@@ -636,6 +637,10 @@
 			if (!vlandev)
 				continue;
 
+			flgs = vlandev->flags;
+			if (!(flgs & IFF_UP))
+				continue;
+
 			vlan_sync_address(dev, vlandev);
 		}
 		break;
@@ -747,6 +752,7 @@
 		vlan_dev_set_ingress_priority(dev,
 					      args.u.skb_priority,
 					      args.vlan_qos);
+		err = 0;
 		break;
 
 	case SET_VLAN_EGRESS_PRIORITY_CMD:
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index cf4a80d..2cd139307 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -60,6 +60,7 @@
 int vlan_dev_change_mtu(struct net_device *dev, int new_mtu);
 int vlan_dev_open(struct net_device* dev);
 int vlan_dev_stop(struct net_device* dev);
+int vlan_set_mac_address(struct net_device *dev, void *p);
 int vlan_dev_ioctl(struct net_device* dev, struct ifreq *ifr, int cmd);
 void vlan_dev_set_ingress_priority(const struct net_device *dev,
 				   u32 skb_prio, short vlan_prio);
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 1a1740a..7a36878 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -665,6 +665,32 @@
 	return 0;
 }
 
+int vlan_set_mac_address(struct net_device *dev, void *p)
+{
+	struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
+	struct sockaddr *addr = p;
+	int err;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	if (!(dev->flags & IFF_UP))
+		goto out;
+
+	if (compare_ether_addr(addr->sa_data, real_dev->dev_addr)) {
+		err = dev_unicast_add(real_dev, addr->sa_data, ETH_ALEN);
+		if (err < 0)
+			return err;
+	}
+
+	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
+		dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
+
+out:
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+	return 0;
+}
+
 int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
diff --git a/net/9p/mod.c b/net/9p/mod.c
index 41d70f4..8f9763a 100644
--- a/net/9p/mod.c
+++ b/net/9p/mod.c
@@ -76,9 +76,9 @@
 	list_for_each(p, &v9fs_trans_list) {
 		t = list_entry(p, struct p9_trans_module, list);
 		if (strncmp(t->name, name->from, name->to-name->from) == 0)
-			break;
+			return t;
 	}
-	return t;
+	return NULL;
 }
 EXPORT_SYMBOL(v9fs_match_trans);
 
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 30269a4..62332ed 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -62,13 +62,14 @@
 
 enum {
 	/* Options that take integer arguments */
-	Opt_port, Opt_rfdno, Opt_wfdno,
+	Opt_port, Opt_rfdno, Opt_wfdno, Opt_err,
 };
 
 static match_table_t tokens = {
 	{Opt_port, "port=%u"},
 	{Opt_rfdno, "rfdno=%u"},
 	{Opt_wfdno, "wfdno=%u"},
+	{Opt_err, NULL},
 };
 
 /**
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index da22f90..c1757c7 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -766,6 +766,9 @@
 	if (!nf_bridge)
 		return NF_ACCEPT;
 
+	if (!(nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT)))
+		return NF_ACCEPT;
+
 	if (!realoutdev)
 		return NF_DROP;
 
diff --git a/net/bridge/netfilter/ebt_arp.c b/net/bridge/netfilter/ebt_arp.c
index 1a46952..1814139 100644
--- a/net/bridge/netfilter/ebt_arp.c
+++ b/net/bridge/netfilter/ebt_arp.c
@@ -34,7 +34,7 @@
 	   ah->ar_pro, EBT_ARP_PTYPE))
 		return EBT_NOMATCH;
 
-	if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP)) {
+	if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_GRAT)) {
 		__be32 saddr, daddr, *sap, *dap;
 
 		if (ah->ar_pln != sizeof(__be32) || ah->ar_pro != htons(ETH_P_IP))
diff --git a/net/core/dev.c b/net/core/dev.c
index be6ceda..86d6261 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1171,6 +1171,8 @@
 			nb->notifier_call(nb, NETDEV_UNREGISTER, dev);
 		}
 	}
+
+	raw_notifier_chain_unregister(&netdev_chain, nb);
 	goto unlock;
 }
 
@@ -2688,7 +2690,7 @@
 	proc_net_remove(net, "dev");
 }
 
-static struct pernet_operations dev_proc_ops = {
+static struct pernet_operations __net_initdata dev_proc_ops = {
 	.init = dev_proc_net_init,
 	.exit = dev_proc_net_exit,
 };
@@ -4330,7 +4332,6 @@
 static int __net_init netdev_init(struct net *net)
 {
 	INIT_LIST_HEAD(&net->dev_base_head);
-	rwlock_init(&dev_base_lock);
 
 	net->dev_name_head = netdev_create_hash();
 	if (net->dev_name_head == NULL)
@@ -4354,7 +4355,7 @@
 	kfree(net->dev_index_head);
 }
 
-static struct pernet_operations  netdev_net_ops = {
+static struct pernet_operations __net_initdata netdev_net_ops = {
 	.init = netdev_init,
 	.exit = netdev_exit,
 };
@@ -4385,7 +4386,7 @@
 	rtnl_unlock();
 }
 
-static struct pernet_operations  default_device_ops = {
+static struct pernet_operations __net_initdata default_device_ops = {
 	.exit = default_device_exit,
 };
 
diff --git a/net/core/dev_mcast.c b/net/core/dev_mcast.c
index ae35405..69fff16 100644
--- a/net/core/dev_mcast.c
+++ b/net/core/dev_mcast.c
@@ -168,13 +168,13 @@
 	da = from->mc_list;
 	while (da != NULL) {
 		next = da->next;
-		if (!da->da_synced)
-			continue;
-		__dev_addr_delete(&to->mc_list, &to->mc_count,
-				  da->da_addr, da->da_addrlen, 0);
-		da->da_synced = 0;
-		__dev_addr_delete(&from->mc_list, &from->mc_count,
-				  da->da_addr, da->da_addrlen, 0);
+		if (da->da_synced) {
+			__dev_addr_delete(&to->mc_list, &to->mc_count,
+					  da->da_addr, da->da_addrlen, 0);
+			da->da_synced = 0;
+			__dev_addr_delete(&from->mc_list, &from->mc_count,
+					  da->da_addr, da->da_addrlen, 0);
+		}
 		da = next;
 	}
 	__dev_set_rx_mode(to);
@@ -285,7 +285,7 @@
 	proc_net_remove(net, "dev_mcast");
 }
 
-static struct pernet_operations dev_mc_net_ops = {
+static struct pernet_operations __net_initdata dev_mc_net_ops = {
 	.init = dev_mc_net_init,
 	.exit = dev_mc_net_exit,
 };
diff --git a/net/core/dst.c b/net/core/dst.c
index 16958e6..03daead 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -18,7 +18,6 @@
 #include <linux/types.h>
 #include <net/net_namespace.h>
 
-#include <net/net_namespace.h>
 #include <net/dst.h>
 
 /*
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 13de6f5..848132b 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -18,6 +18,28 @@
 static LIST_HEAD(rules_ops);
 static DEFINE_SPINLOCK(rules_mod_lock);
 
+int fib_default_rule_add(struct fib_rules_ops *ops,
+			 u32 pref, u32 table, u32 flags)
+{
+	struct fib_rule *r;
+
+	r = kzalloc(ops->rule_size, GFP_KERNEL);
+	if (r == NULL)
+		return -ENOMEM;
+
+	atomic_set(&r->refcnt, 1);
+	r->action = FR_ACT_TO_TBL;
+	r->pref = pref;
+	r->table = table;
+	r->flags = flags;
+
+	/* The lock is not required here, the list in unreacheable
+	 * at the moment this function is called */
+	list_add_tail(&r->list, &ops->rules_list);
+	return 0;
+}
+EXPORT_SYMBOL(fib_default_rule_add);
+
 static void notify_rule_change(int event, struct fib_rule *rule,
 			       struct fib_rules_ops *ops, struct nlmsghdr *nlh,
 			       u32 pid);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 05979e3..29b8ee4 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1435,6 +1435,8 @@
 	kfree(tbl->phash_buckets);
 	tbl->phash_buckets = NULL;
 
+	remove_proc_entry(tbl->id, init_net.proc_net_stat);
+
 	free_percpu(tbl->stats);
 	tbl->stats = NULL;
 
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index e9f0964..383252b 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -64,6 +64,20 @@
 	return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
 }
 
+static void net_free(struct net *net)
+{
+	if (!net)
+		return;
+
+	if (unlikely(atomic_read(&net->use_count) != 0)) {
+		printk(KERN_EMERG "network namespace not free! Usage: %d\n",
+			atomic_read(&net->use_count));
+		return;
+	}
+
+	kmem_cache_free(net_cachep, net);
+}
+
 struct net *copy_net_ns(unsigned long flags, struct net *old_net)
 {
 	struct net *new_net = NULL;
@@ -100,20 +114,6 @@
 	return new_net;
 }
 
-static void net_free(struct net *net)
-{
-	if (!net)
-		return;
-
-	if (unlikely(atomic_read(&net->use_count) != 0)) {
-		printk(KERN_EMERG "network namespace not free! Usage: %d\n",
-			atomic_read(&net->use_count));
-		return;
-	}
-
-	kmem_cache_free(net_cachep, net);
-}
-
 static void cleanup_net(struct work_struct *work)
 {
 	struct pernet_operations *ops;
@@ -188,6 +188,7 @@
 
 pure_initcall(net_ns_init);
 
+#ifdef CONFIG_NET_NS
 static int register_pernet_operations(struct list_head *list,
 				      struct pernet_operations *ops)
 {
@@ -228,6 +229,23 @@
 			ops->exit(net);
 }
 
+#else
+
+static int register_pernet_operations(struct list_head *list,
+				      struct pernet_operations *ops)
+{
+	if (ops->init == NULL)
+		return 0;
+	return ops->init(&init_net);
+}
+
+static void unregister_pernet_operations(struct pernet_operations *ops)
+{
+	if (ops->exit)
+		ops->exit(&init_net);
+}
+#endif
+
 /**
  *      register_pernet_subsys - register a network namespace subsystem
  *	@ops:  pernet operations structure for the subsystem
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 5f0818d..45aed75 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -71,6 +71,41 @@
 
 EXPORT_SYMBOL(reqsk_queue_alloc);
 
+void __reqsk_queue_destroy(struct request_sock_queue *queue)
+{
+	struct listen_sock *lopt;
+	size_t lopt_size;
+
+	/*
+	 * this is an error recovery path only
+	 * no locking needed and the lopt is not NULL
+	 */
+
+	lopt = queue->listen_opt;
+	lopt_size = sizeof(struct listen_sock) +
+		lopt->nr_table_entries * sizeof(struct request_sock *);
+
+	if (lopt_size > PAGE_SIZE)
+		vfree(lopt);
+	else
+		kfree(lopt);
+}
+
+EXPORT_SYMBOL(__reqsk_queue_destroy);
+
+static inline struct listen_sock *reqsk_queue_yank_listen_sk(
+		struct request_sock_queue *queue)
+{
+	struct listen_sock *lopt;
+
+	write_lock_bh(&queue->syn_wait_lock);
+	lopt = queue->listen_opt;
+	queue->listen_opt = NULL;
+	write_unlock_bh(&queue->syn_wait_lock);
+
+	return lopt;
+}
+
 void reqsk_queue_destroy(struct request_sock_queue *queue)
 {
 	/* make all the listen_opt local to us */
diff --git a/net/core/sock.c b/net/core/sock.c
index 12ad206..c519b43 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1801,11 +1801,65 @@
 static DEFINE_RWLOCK(proto_list_lock);
 static LIST_HEAD(proto_list);
 
+#ifdef CONFIG_SMP
+/*
+ * Define default functions to keep track of inuse sockets per protocol
+ * Note that often used protocols use dedicated functions to get a speed increase.
+ * (see DEFINE_PROTO_INUSE/REF_PROTO_INUSE)
+ */
+static void inuse_add(struct proto *prot, int inc)
+{
+	per_cpu_ptr(prot->inuse_ptr, smp_processor_id())[0] += inc;
+}
+
+static int inuse_get(const struct proto *prot)
+{
+	int res = 0, cpu;
+	for_each_possible_cpu(cpu)
+		res += per_cpu_ptr(prot->inuse_ptr, cpu)[0];
+	return res;
+}
+
+static int inuse_init(struct proto *prot)
+{
+	if (!prot->inuse_getval || !prot->inuse_add) {
+		prot->inuse_ptr = alloc_percpu(int);
+		if (prot->inuse_ptr == NULL)
+			return -ENOBUFS;
+
+		prot->inuse_getval = inuse_get;
+		prot->inuse_add = inuse_add;
+	}
+	return 0;
+}
+
+static void inuse_fini(struct proto *prot)
+{
+	if (prot->inuse_ptr != NULL) {
+		free_percpu(prot->inuse_ptr);
+		prot->inuse_ptr = NULL;
+		prot->inuse_getval = NULL;
+		prot->inuse_add = NULL;
+	}
+}
+#else
+static inline int inuse_init(struct proto *prot)
+{
+	return 0;
+}
+
+static inline void inuse_fini(struct proto *prot)
+{
+}
+#endif
+
 int proto_register(struct proto *prot, int alloc_slab)
 {
 	char *request_sock_slab_name = NULL;
 	char *timewait_sock_slab_name;
-	int rc = -ENOBUFS;
+
+	if (inuse_init(prot))
+		goto out;
 
 	if (alloc_slab) {
 		prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0,
@@ -1814,7 +1868,7 @@
 		if (prot->slab == NULL) {
 			printk(KERN_CRIT "%s: Can't create sock SLAB cache!\n",
 			       prot->name);
-			goto out;
+			goto out_free_inuse;
 		}
 
 		if (prot->rsk_prot != NULL) {
@@ -1858,9 +1912,8 @@
 	write_lock(&proto_list_lock);
 	list_add(&prot->node, &proto_list);
 	write_unlock(&proto_list_lock);
-	rc = 0;
-out:
-	return rc;
+	return 0;
+
 out_free_timewait_sock_slab_name:
 	kfree(timewait_sock_slab_name);
 out_free_request_sock_slab:
@@ -1873,7 +1926,10 @@
 out_free_sock_slab:
 	kmem_cache_destroy(prot->slab);
 	prot->slab = NULL;
-	goto out;
+out_free_inuse:
+	inuse_fini(prot);
+out:
+	return -ENOBUFS;
 }
 
 EXPORT_SYMBOL(proto_register);
@@ -1884,6 +1940,7 @@
 	list_del(&prot->node);
 	write_unlock(&proto_list_lock);
 
+	inuse_fini(prot);
 	if (prot->slab != NULL) {
 		kmem_cache_destroy(prot->slab);
 		prot->slab = NULL;
@@ -2040,7 +2097,3 @@
 EXPORT_SYMBOL(sock_i_uid);
 EXPORT_SYMBOL(sock_i_ino);
 EXPORT_SYMBOL(sysctl_optmem_max);
-#ifdef CONFIG_SYSCTL
-EXPORT_SYMBOL(sysctl_rmem_max);
-EXPORT_SYMBOL(sysctl_wmem_max);
-#endif
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 01a6a80..db17b83 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -922,6 +922,8 @@
 	.twsk_obj_size	= sizeof(struct inet_timewait_sock),
 };
 
+DEFINE_PROTO_INUSE(dccp_v4)
+
 static struct proto dccp_v4_prot = {
 	.name			= "DCCP",
 	.owner			= THIS_MODULE,
@@ -950,6 +952,7 @@
 	.compat_setsockopt	= compat_dccp_setsockopt,
 	.compat_getsockopt	= compat_dccp_getsockopt,
 #endif
+	REF_PROTO_INUSE(dccp_v4)
 };
 
 static struct net_protocol dccp_v4_protocol = {
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 62428ff..87c98fb 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1107,6 +1107,8 @@
 	.twsk_obj_size	= sizeof(struct dccp6_timewait_sock),
 };
 
+DEFINE_PROTO_INUSE(dccp_v6)
+
 static struct proto dccp_v6_prot = {
 	.name		   = "DCCPv6",
 	.owner		   = THIS_MODULE,
@@ -1135,6 +1137,7 @@
 	.compat_setsockopt = compat_dccp_setsockopt,
 	.compat_getsockopt = compat_dccp_getsockopt,
 #endif
+	REF_PROTO_INUSE(dccp_v6)
 };
 
 static struct inet6_protocol dccp_v6_protocol = {
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index d849739..7a3bea9 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1072,11 +1072,13 @@
 	}
 
 	for (i = 0; i < dccp_hashinfo.ehash_size; i++) {
-		rwlock_init(&dccp_hashinfo.ehash[i].lock);
 		INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].chain);
 		INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].twchain);
 	}
 
+	if (inet_ehash_locks_alloc(&dccp_hashinfo))
+			goto out_free_dccp_ehash;
+
 	bhash_order = ehash_order;
 
 	do {
@@ -1091,7 +1093,7 @@
 
 	if (!dccp_hashinfo.bhash) {
 		DCCP_CRIT("Failed to allocate DCCP bind hash table");
-		goto out_free_dccp_ehash;
+		goto out_free_dccp_locks;
 	}
 
 	for (i = 0; i < dccp_hashinfo.bhash_size; i++) {
@@ -1121,6 +1123,8 @@
 out_free_dccp_bhash:
 	free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order);
 	dccp_hashinfo.bhash = NULL;
+out_free_dccp_locks:
+	inet_ehash_locks_free(&dccp_hashinfo);
 out_free_dccp_ehash:
 	free_pages((unsigned long)dccp_hashinfo.ehash, ehash_order);
 	dccp_hashinfo.ehash = NULL;
@@ -1139,6 +1143,7 @@
 	free_pages((unsigned long)dccp_hashinfo.ehash,
 		   get_order(dccp_hashinfo.ehash_size *
 			     sizeof(struct inet_ehash_bucket)));
+	inet_ehash_locks_free(&dccp_hashinfo);
 	kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
 	dccp_ackvec_exit();
 	dccp_sysctl_exit();
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 26130af..66e266f 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -1439,7 +1439,7 @@
 
 #endif /* CONFIG_PROC_FS */
 
-static int __initdata addr[2];
+static int addr[2];
 module_param_array(addr, int, NULL, 0444);
 MODULE_PARM_DESC(addr, "The DECnet address of this machine: area,node");
 
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 97eee5e..66663e5 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -293,9 +293,7 @@
 					   dn_rt_hash_table[hash].chain);
 			rcu_assign_pointer(dn_rt_hash_table[hash].chain, rth);
 
-			rth->u.dst.__use++;
-			dst_hold(&rth->u.dst);
-			rth->u.dst.lastuse = now;
+			dst_use(&rth->u.dst, now);
 			spin_unlock_bh(&dn_rt_hash_table[hash].lock);
 
 			dnrt_drop(rt);
@@ -308,9 +306,7 @@
 	rcu_assign_pointer(rt->u.dst.dn_next, dn_rt_hash_table[hash].chain);
 	rcu_assign_pointer(dn_rt_hash_table[hash].chain, rt);
 
-	dst_hold(&rt->u.dst);
-	rt->u.dst.__use++;
-	rt->u.dst.lastuse = now;
+	dst_use(&rt->u.dst, now);
 	spin_unlock_bh(&dn_rt_hash_table[hash].lock);
 	*rp = rt;
 	return 0;
@@ -1182,9 +1178,7 @@
 			    (flp->mark == rt->fl.mark) &&
 			    (rt->fl.iif == 0) &&
 			    (rt->fl.oif == flp->oif)) {
-				rt->u.dst.lastuse = jiffies;
-				dst_hold(&rt->u.dst);
-				rt->u.dst.__use++;
+				dst_use(&rt->u.dst, jiffies);
 				rcu_read_unlock_bh();
 				*pprt = &rt->u.dst;
 				return 0;
@@ -1456,9 +1450,7 @@
 		    (rt->fl.oif == 0) &&
 		    (rt->fl.mark == skb->mark) &&
 		    (rt->fl.iif == cb->iif)) {
-			rt->u.dst.lastuse = jiffies;
-			dst_hold(&rt->u.dst);
-			rt->u.dst.__use++;
+			dst_use(&rt->u.dst, jiffies);
 			rcu_read_unlock();
 			skb->dst = (struct dst_entry *)rt;
 			return 0;
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index ddd3f04..ffebea0 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -48,15 +48,6 @@
 	u8			flags;
 };
 
-static struct dn_fib_rule default_rule = {
-	.common = {
-		.refcnt =		ATOMIC_INIT(2),
-		.pref =			0x7fff,
-		.table =		RT_TABLE_MAIN,
-		.action =		FR_ACT_TO_TBL,
-	},
-};
-
 
 int dn_fib_lookup(struct flowi *flp, struct dn_fib_res *res)
 {
@@ -262,8 +253,8 @@
 
 void __init dn_fib_rules_init(void)
 {
-	list_add_tail(&default_rule.common.list,
-			&dn_fib_rules_ops.rules_list);
+	BUG_ON(fib_default_rule_add(&dn_fib_rules_ops, 0x7fff,
+			            RT_TABLE_MAIN, 0));
 	fib_rules_register(&dn_fib_rules_ops);
 }
 
diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c
index 4cce353..58b2261 100644
--- a/net/ieee80211/ieee80211_crypt_tkip.c
+++ b/net/ieee80211/ieee80211_crypt_tkip.c
@@ -25,7 +25,6 @@
 #include <net/ieee80211.h>
 
 #include <linux/crypto.h>
-#include <linux/scatterlist.h>
 #include <linux/crc32.h>
 
 MODULE_AUTHOR("Jouni Malinen");
diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c
index 866fc04..3fa30c4 100644
--- a/net/ieee80211/ieee80211_crypt_wep.c
+++ b/net/ieee80211/ieee80211_crypt_wep.c
@@ -22,7 +22,6 @@
 #include <net/ieee80211.h>
 
 #include <linux/crypto.h>
-#include <linux/scatterlist.h>
 #include <linux/crc32.h>
 
 MODULE_AUTHOR("Jouni Malinen");
diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c
index ac36767..e01b59a 100644
--- a/net/ieee80211/softmac/ieee80211softmac_wx.c
+++ b/net/ieee80211/softmac/ieee80211softmac_wx.c
@@ -470,7 +470,7 @@
 {
 	struct ieee80211softmac_device *mac = ieee80211_priv(dev);
 	struct iw_mlme *mlme = (struct iw_mlme *)extra;
-	u16 reason = cpu_to_le16(mlme->reason_code);
+	u16 reason = mlme->reason_code;
 	struct ieee80211softmac_network *net;
 	int err = -EINVAL;
 
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 6012390..732d8f0 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -59,6 +59,13 @@
 #define FIB_TABLE_HASHSZ 1
 static struct hlist_head fib_table_hash[FIB_TABLE_HASHSZ];
 
+static void __init fib4_rules_init(void)
+{
+	ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL);
+	hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]);
+	ip_fib_main_table  = fib_hash_init(RT_TABLE_MAIN);
+	hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]);
+}
 #else
 
 #define FIB_TABLE_HASHSZ 256
@@ -905,14 +912,8 @@
 
 	for (i = 0; i < FIB_TABLE_HASHSZ; i++)
 		INIT_HLIST_HEAD(&fib_table_hash[i]);
-#ifndef CONFIG_IP_MULTIPLE_TABLES
-	ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL);
-	hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]);
-	ip_fib_main_table  = fib_hash_init(RT_TABLE_MAIN);
-	hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]);
-#else
+
 	fib4_rules_init();
-#endif
 
 	register_netdevice_notifier(&fib_netdev_notifier);
 	register_inetaddr_notifier(&fib_inetaddr_notifier);
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index f16839c..a0ada3a 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -49,33 +49,6 @@
 #endif
 };
 
-static struct fib4_rule default_rule = {
-	.common = {
-		.refcnt =	ATOMIC_INIT(2),
-		.pref =		0x7FFF,
-		.table =	RT_TABLE_DEFAULT,
-		.action =	FR_ACT_TO_TBL,
-	},
-};
-
-static struct fib4_rule main_rule = {
-	.common = {
-		.refcnt =	ATOMIC_INIT(2),
-		.pref =		0x7FFE,
-		.table =	RT_TABLE_MAIN,
-		.action =	FR_ACT_TO_TBL,
-	},
-};
-
-static struct fib4_rule local_rule = {
-	.common = {
-		.refcnt =	ATOMIC_INIT(2),
-		.table =	RT_TABLE_LOCAL,
-		.action =	FR_ACT_TO_TBL,
-		.flags =	FIB_RULE_PERMANENT,
-	},
-};
-
 #ifdef CONFIG_NET_CLS_ROUTE
 u32 fib_rules_tclass(struct fib_result *res)
 {
@@ -319,11 +292,27 @@
 	.owner		= THIS_MODULE,
 };
 
+static int __init fib_default_rules_init(void)
+{
+	int err;
+
+	err = fib_default_rule_add(&fib4_rules_ops, 0,
+				   RT_TABLE_LOCAL, FIB_RULE_PERMANENT);
+	if (err < 0)
+		return err;
+	err = fib_default_rule_add(&fib4_rules_ops, 0x7FFE,
+				   RT_TABLE_MAIN, 0);
+	if (err < 0)
+		return err;
+	err = fib_default_rule_add(&fib4_rules_ops, 0x7FFF,
+				   RT_TABLE_DEFAULT, 0);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
 void __init fib4_rules_init(void)
 {
-	list_add_tail(&local_rule.common.list, &fib4_rules_ops.rules_list);
-	list_add_tail(&main_rule.common.list, &fib4_rules_ops.rules_list);
-	list_add_tail(&default_rule.common.list, &fib4_rules_ops.rules_list);
-
+	BUG_ON(fib_default_rules_init());
 	fib_rules_register(&fib4_rules_ops);
 }
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index dc429b6..b017073 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -747,13 +747,14 @@
 
 	for (i = s_i; i < hashinfo->ehash_size; i++) {
 		struct inet_ehash_bucket *head = &hashinfo->ehash[i];
+		rwlock_t *lock = inet_ehash_lockp(hashinfo, i);
 		struct sock *sk;
 		struct hlist_node *node;
 
 		if (i > s_i)
 			s_num = 0;
 
-		read_lock_bh(&head->lock);
+		read_lock_bh(lock);
 		num = 0;
 		sk_for_each(sk, node, &head->chain) {
 			struct inet_sock *inet = inet_sk(sk);
@@ -769,7 +770,7 @@
 			    r->id.idiag_dport)
 				goto next_normal;
 			if (inet_csk_diag_dump(sk, skb, cb) < 0) {
-				read_unlock_bh(&head->lock);
+				read_unlock_bh(lock);
 				goto done;
 			}
 next_normal:
@@ -791,14 +792,14 @@
 				    r->id.idiag_dport)
 					goto next_dying;
 				if (inet_twsk_diag_dump(tw, skb, cb) < 0) {
-					read_unlock_bh(&head->lock);
+					read_unlock_bh(lock);
 					goto done;
 				}
 next_dying:
 				++num;
 			}
 		}
-		read_unlock_bh(&head->lock);
+		read_unlock_bh(lock);
 	}
 
 done:
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 16eecc7..67704da 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -204,12 +204,13 @@
 	const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
 	unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
+	rwlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
 	const struct hlist_node *node;
 	struct inet_timewait_sock *tw;
 
 	prefetch(head->chain.first);
-	write_lock(&head->lock);
+	write_lock(lock);
 
 	/* Check TIME-WAIT sockets first. */
 	sk_for_each(sk2, node, &head->twchain) {
@@ -239,7 +240,7 @@
 	BUG_TRAP(sk_unhashed(sk));
 	__sk_add_node(sk, &head->chain);
 	sock_prot_inc_use(sk->sk_prot);
-	write_unlock(&head->lock);
+	write_unlock(lock);
 
 	if (twp) {
 		*twp = tw;
@@ -255,7 +256,7 @@
 	return 0;
 
 not_unique:
-	write_unlock(&head->lock);
+	write_unlock(lock);
 	return -EADDRNOTAVAIL;
 }
 
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 4e189e2..a60b99e 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -20,16 +20,16 @@
 	struct inet_bind_hashbucket *bhead;
 	struct inet_bind_bucket *tb;
 	/* Unlink from established hashes. */
-	struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, tw->tw_hash);
+	rwlock_t *lock = inet_ehash_lockp(hashinfo, tw->tw_hash);
 
-	write_lock(&ehead->lock);
+	write_lock(lock);
 	if (hlist_unhashed(&tw->tw_node)) {
-		write_unlock(&ehead->lock);
+		write_unlock(lock);
 		return;
 	}
 	__hlist_del(&tw->tw_node);
 	sk_node_init(&tw->tw_node);
-	write_unlock(&ehead->lock);
+	write_unlock(lock);
 
 	/* Disassociate with bind bucket. */
 	bhead = &hashinfo->bhash[inet_bhashfn(tw->tw_num, hashinfo->bhash_size)];
@@ -59,6 +59,7 @@
 	const struct inet_sock *inet = inet_sk(sk);
 	const struct inet_connection_sock *icsk = inet_csk(sk);
 	struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, sk->sk_hash);
+	rwlock_t *lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
 	struct inet_bind_hashbucket *bhead;
 	/* Step 1: Put TW into bind hash. Original socket stays there too.
 	   Note, that any socket with inet->num != 0 MUST be bound in
@@ -71,7 +72,7 @@
 	inet_twsk_add_bind_node(tw, &tw->tw_tb->owners);
 	spin_unlock(&bhead->lock);
 
-	write_lock(&ehead->lock);
+	write_lock(lock);
 
 	/* Step 2: Remove SK from established hash. */
 	if (__sk_del_node_init(sk))
@@ -81,7 +82,7 @@
 	inet_twsk_add_node(tw, &ehead->twchain);
 	atomic_inc(&tw->tw_refcnt);
 
-	write_unlock(&ehead->lock);
+	write_unlock(lock);
 }
 
 EXPORT_SYMBOL_GPL(__inet_twsk_hashdance);
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index 771031d..af99519 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -61,7 +61,7 @@
  *  4.  Global variable peer_total is modified under the pool lock.
  *  5.  struct inet_peer fields modification:
  *		avl_left, avl_right, avl_parent, avl_height: pool lock
- *		unused_next, unused_prevp: unused node list lock
+ *		unused: unused node list lock
  *		refcnt: atomically against modifications on other CPU;
  *		   usually under some other lock to prevent node disappearing
  *		dtime: unused node list lock
@@ -94,8 +94,7 @@
 int inet_peer_gc_mintime __read_mostly = 10 * HZ;
 int inet_peer_gc_maxtime __read_mostly = 120 * HZ;
 
-static struct inet_peer *inet_peer_unused_head;
-static struct inet_peer **inet_peer_unused_tailp = &inet_peer_unused_head;
+static LIST_HEAD(unused_peers);
 static DEFINE_SPINLOCK(inet_peer_unused_lock);
 
 static void peer_check_expire(unsigned long dummy);
@@ -138,15 +137,7 @@
 static void unlink_from_unused(struct inet_peer *p)
 {
 	spin_lock_bh(&inet_peer_unused_lock);
-	if (p->unused_prevp != NULL) {
-		/* On unused list. */
-		*p->unused_prevp = p->unused_next;
-		if (p->unused_next != NULL)
-			p->unused_next->unused_prevp = p->unused_prevp;
-		else
-			inet_peer_unused_tailp = p->unused_prevp;
-		p->unused_prevp = NULL; /* mark it as removed */
-	}
+	list_del_init(&p->unused);
 	spin_unlock_bh(&inet_peer_unused_lock);
 }
 
@@ -337,24 +328,24 @@
 /* May be called with local BH enabled. */
 static int cleanup_once(unsigned long ttl)
 {
-	struct inet_peer *p;
+	struct inet_peer *p = NULL;
 
 	/* Remove the first entry from the list of unused nodes. */
 	spin_lock_bh(&inet_peer_unused_lock);
-	p = inet_peer_unused_head;
-	if (p != NULL) {
-		__u32 delta = (__u32)jiffies - p->dtime;
+	if (!list_empty(&unused_peers)) {
+		__u32 delta;
+
+		p = list_first_entry(&unused_peers, struct inet_peer, unused);
+		delta = (__u32)jiffies - p->dtime;
+
 		if (delta < ttl) {
 			/* Do not prune fresh entries. */
 			spin_unlock_bh(&inet_peer_unused_lock);
 			return -1;
 		}
-		inet_peer_unused_head = p->unused_next;
-		if (p->unused_next != NULL)
-			p->unused_next->unused_prevp = p->unused_prevp;
-		else
-			inet_peer_unused_tailp = p->unused_prevp;
-		p->unused_prevp = NULL; /* mark as not on the list */
+
+		list_del_init(&p->unused);
+
 		/* Grab an extra reference to prevent node disappearing
 		 * before unlink_from_pool() call. */
 		atomic_inc(&p->refcnt);
@@ -412,7 +403,7 @@
 
 	/* Link the node. */
 	link_to_pool(n);
-	n->unused_prevp = NULL; /* not on the list */
+	INIT_LIST_HEAD(&n->unused);
 	peer_total++;
 	write_unlock_bh(&peer_pool_lock);
 
@@ -467,10 +458,7 @@
 {
 	spin_lock_bh(&inet_peer_unused_lock);
 	if (atomic_dec_and_test(&p->refcnt)) {
-		p->unused_prevp = inet_peer_unused_tailp;
-		p->unused_next = NULL;
-		*inet_peer_unused_tailp = p;
-		inet_peer_unused_tailp = &p->unused_next;
+		list_add_tail(&p->unused, &unused_peers);
 		p->dtime = (__u32)jiffies;
 	}
 	spin_unlock_bh(&inet_peer_unused_lock);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e5f7dc2..fd99fbd 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1183,6 +1183,17 @@
 	return err;
 }
 
+static void ip_cork_release(struct inet_sock *inet)
+{
+	inet->cork.flags &= ~IPCORK_OPT;
+	kfree(inet->cork.opt);
+	inet->cork.opt = NULL;
+	if (inet->cork.rt) {
+		ip_rt_put(inet->cork.rt);
+		inet->cork.rt = NULL;
+	}
+}
+
 /*
  *	Combined all pending IP fragments on the socket as one IP datagram
  *	and push them out.
@@ -1276,13 +1287,7 @@
 	}
 
 out:
-	inet->cork.flags &= ~IPCORK_OPT;
-	kfree(inet->cork.opt);
-	inet->cork.opt = NULL;
-	if (inet->cork.rt) {
-		ip_rt_put(inet->cork.rt);
-		inet->cork.rt = NULL;
-	}
+	ip_cork_release(inet);
 	return err;
 
 error:
@@ -1295,19 +1300,12 @@
  */
 void ip_flush_pending_frames(struct sock *sk)
 {
-	struct inet_sock *inet = inet_sk(sk);
 	struct sk_buff *skb;
 
 	while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
 		kfree_skb(skb);
 
-	inet->cork.flags &= ~IPCORK_OPT;
-	kfree(inet->cork.opt);
-	inet->cork.opt = NULL;
-	if (inet->cork.rt) {
-		ip_rt_put(inet->cork.rt);
-		inet->cork.rt = NULL;
-	}
+	ip_cork_release(inet_sk(sk));
 }
 
 
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index f51f20e..82817e5 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -437,10 +437,8 @@
 
 	/* If optlen==0, it is equivalent to val == 0 */
 
-#ifdef CONFIG_IP_MROUTE
-	if (optname >= MRT_BASE && optname <= (MRT_BASE + 10))
+	if (ip_mroute_opt(optname))
 		return ip_mroute_setsockopt(sk,optname,optval,optlen);
-#endif
 
 	err = 0;
 	lock_sock(sk);
@@ -909,11 +907,9 @@
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
 	if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
-		optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY
-#ifdef CONFIG_IP_MROUTE
-		&& (optname < MRT_BASE || optname > (MRT_BASE + 10))
-#endif
-	   ) {
+			optname != IP_IPSEC_POLICY &&
+			optname != IP_XFRM_POLICY &&
+			!ip_mroute_opt(optname)) {
 		lock_sock(sk);
 		err = nf_setsockopt(sk, PF_INET, optname, optval, optlen);
 		release_sock(sk);
@@ -935,11 +931,9 @@
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
 	if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
-	    optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY
-#ifdef CONFIG_IP_MROUTE
-	    && (optname < MRT_BASE || optname > (MRT_BASE + 10))
-#endif
-	   ) {
+			optname != IP_IPSEC_POLICY &&
+			optname != IP_XFRM_POLICY &&
+			!ip_mroute_opt(optname)) {
 		lock_sock(sk);
 		err = compat_nf_setsockopt(sk, PF_INET, optname,
 					   optval, optlen);
@@ -967,11 +961,8 @@
 	if (level != SOL_IP)
 		return -EOPNOTSUPP;
 
-#ifdef CONFIG_IP_MROUTE
-	if (optname >= MRT_BASE && optname <= MRT_BASE+10) {
+	if (ip_mroute_opt(optname))
 		return ip_mroute_getsockopt(sk,optname,optval,optlen);
-	}
-#endif
 
 	if (get_user(len,optlen))
 		return -EFAULT;
@@ -1171,11 +1162,8 @@
 	err = do_ip_getsockopt(sk, level, optname, optval, optlen);
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
-	if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS
-#ifdef CONFIG_IP_MROUTE
-		&& (optname < MRT_BASE || optname > MRT_BASE+10)
-#endif
-	   ) {
+	if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
+			!ip_mroute_opt(optname)) {
 		int len;
 
 		if (get_user(len,optlen))
@@ -1200,11 +1188,8 @@
 	int err = do_ip_getsockopt(sk, level, optname, optval, optlen);
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
-	if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS
-#ifdef CONFIG_IP_MROUTE
-	    && (optname < MRT_BASE || optname > MRT_BASE+10)
-#endif
-	   ) {
+	if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
+			!ip_mroute_opt(optname)) {
 		int len;
 
 		if (get_user(len, optlen))
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index ca1b5fd..2c44a94 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <asm/semaphore.h>
 #include <linux/crypto.h>
+#include <linux/err.h>
 #include <linux/pfkeyv2.h>
 #include <linux/percpu.h>
 #include <linux/smp.h>
@@ -344,7 +345,7 @@
 	for_each_possible_cpu(cpu) {
 		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
 							    CRYPTO_ALG_ASYNC);
-		if (!tfm)
+		if (IS_ERR(tfm))
 			goto error;
 		*per_cpu_ptr(tfms, cpu) = tfm;
 	}
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index 4b702f7..0a9f3c3 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -426,6 +426,24 @@
 
 
 /*
+ * Check if there is a destination for the connection, if so
+ * bind the connection to the destination.
+ */
+struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp)
+{
+	struct ip_vs_dest *dest;
+
+	if ((cp) && (!cp->dest)) {
+		dest = ip_vs_find_dest(cp->daddr, cp->dport,
+				       cp->vaddr, cp->vport, cp->protocol);
+		ip_vs_bind_dest(cp, dest);
+		return dest;
+	} else
+		return NULL;
+}
+
+
+/*
  *	Unbind a connection entry with its VS destination
  *	Called by the ip_vs_conn_expire function.
  */
diff --git a/net/ipv4/ipvs/ip_vs_core.c b/net/ipv4/ipvs/ip_vs_core.c
index c6ed765..20c884a 100644
--- a/net/ipv4/ipvs/ip_vs_core.c
+++ b/net/ipv4/ipvs/ip_vs_core.c
@@ -979,15 +979,23 @@
 		ret = NF_ACCEPT;
 	}
 
-	/* increase its packet counter and check if it is needed
-	   to be synchronized */
+	/* Increase its packet counter and check if it is needed
+	 * to be synchronized
+	 *
+	 * Sync connection if it is about to close to
+	 * encorage the standby servers to update the connections timeout
+	 */
 	atomic_inc(&cp->in_pkts);
 	if ((ip_vs_sync_state & IP_VS_STATE_MASTER) &&
-	    (cp->protocol != IPPROTO_TCP ||
-	     cp->state == IP_VS_TCP_S_ESTABLISHED) &&
-	    (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1]
-	     == sysctl_ip_vs_sync_threshold[0]))
+	    (((cp->protocol != IPPROTO_TCP ||
+	       cp->state == IP_VS_TCP_S_ESTABLISHED) &&
+	      (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1]
+	       == sysctl_ip_vs_sync_threshold[0])) ||
+	     ((cp->protocol == IPPROTO_TCP) && (cp->old_state != cp->state) &&
+	      ((cp->state == IP_VS_TCP_S_FIN_WAIT) ||
+	       (cp->state == IP_VS_TCP_S_CLOSE)))))
 		ip_vs_sync_conn(cp);
+	cp->old_state = cp->state;
 
 	ip_vs_conn_put(cp);
 	return ret;
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 7345fc2..b64cf45 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -579,6 +579,31 @@
 	return NULL;
 }
 
+/*
+ * Find destination by {daddr,dport,vaddr,protocol}
+ * Cretaed to be used in ip_vs_process_message() in
+ * the backup synchronization daemon. It finds the
+ * destination to be bound to the received connection
+ * on the backup.
+ *
+ * ip_vs_lookup_real_service() looked promissing, but
+ * seems not working as expected.
+ */
+struct ip_vs_dest *ip_vs_find_dest(__be32 daddr, __be16 dport,
+				    __be32 vaddr, __be16 vport, __u16 protocol)
+{
+	struct ip_vs_dest *dest;
+	struct ip_vs_service *svc;
+
+	svc = ip_vs_service_get(0, protocol, vaddr, vport);
+	if (!svc)
+		return NULL;
+	dest = ip_vs_lookup_dest(svc, daddr, dport);
+	if (dest)
+		atomic_inc(&dest->refcnt);
+	ip_vs_service_put(svc);
+	return dest;
+}
 
 /*
  *  Lookup dest by {svc,addr,port} in the destination trash.
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index 0d4d972..bd930ef 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -284,6 +284,7 @@
 	struct ip_vs_sync_conn_options *opt;
 	struct ip_vs_conn *cp;
 	struct ip_vs_protocol *pp;
+	struct ip_vs_dest *dest;
 	char *p;
 	int i;
 
@@ -317,20 +318,34 @@
 					       s->caddr, s->cport,
 					       s->vaddr, s->vport);
 		if (!cp) {
+			/*
+			 * Find the appropriate destination for the connection.
+			 * If it is not found the connection will remain unbound
+			 * but still handled.
+			 */
+			dest = ip_vs_find_dest(s->daddr, s->dport,
+					       s->vaddr, s->vport,
+					       s->protocol);
 			cp = ip_vs_conn_new(s->protocol,
 					    s->caddr, s->cport,
 					    s->vaddr, s->vport,
 					    s->daddr, s->dport,
-					    flags, NULL);
+					    flags, dest);
+			if (dest)
+				atomic_dec(&dest->refcnt);
 			if (!cp) {
 				IP_VS_ERR("ip_vs_conn_new failed\n");
 				return;
 			}
 			cp->state = ntohs(s->state);
 		} else if (!cp->dest) {
-			/* it is an entry created by the synchronization */
-			cp->state = ntohs(s->state);
-			cp->flags = flags | IP_VS_CONN_F_HASHED;
+			dest = ip_vs_try_bind_dest(cp);
+			if (!dest) {
+				/* it is an unbound entry created by
+				 * synchronization */
+				cp->flags = flags | IP_VS_CONN_F_HASHED;
+			} else
+				atomic_dec(&dest->refcnt);
 		}	/* Note that we don't touch its state and flags
 			   if it is a normal entry. */
 
@@ -342,6 +357,7 @@
 			p += SIMPLE_CONN_SIZE;
 
 		atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]);
+		cp->state = ntohs(s->state);
 		pp = ip_vs_proto_get(s->protocol);
 		cp->timeout = pp->timeout_table[cp->state];
 		ip_vs_conn_put(cp);
diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
index 409d273..7456833 100644
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -41,27 +41,27 @@
 obj-$(CONFIG_IP_NF_RAW) += iptable_raw.o
 
 # matches
+obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o
+obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
+obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
 obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o
 obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
-obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
 obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
-obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
-obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
+obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
 obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
-obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o
 
 # targets
-obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
-obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
-obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
-obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
-obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
-obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
-obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o
-obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
 obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
+obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
+obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
+obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o
+obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
 obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
+obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
 
 # generic ARP tables
 obj-$(CONFIG_IP_NF_ARPTABLES) += arp_tables.o
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 10a2ce0..14d64a3 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -22,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/sysctl.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/security.h>
 #include <linux/mutex.h>
 #include <net/net_namespace.h>
@@ -607,15 +608,11 @@
 	{ .ctl_name = 0 }
 };
 
-#ifdef CONFIG_PROC_FS
-static int
-ipq_get_info(char *buffer, char **start, off_t offset, int length)
+static int ip_queue_show(struct seq_file *m, void *v)
 {
-	int len;
-
 	read_lock_bh(&queue_lock);
 
-	len = sprintf(buffer,
+	seq_printf(m,
 		      "Peer PID          : %d\n"
 		      "Copy mode         : %hu\n"
 		      "Copy range        : %u\n"
@@ -632,16 +629,21 @@
 		      queue_user_dropped);
 
 	read_unlock_bh(&queue_lock);
-
-	*start = buffer + offset;
-	len -= offset;
-	if (len > length)
-		len = length;
-	else if (len < 0)
-		len = 0;
-	return len;
+	return 0;
 }
-#endif /* CONFIG_PROC_FS */
+
+static int ip_queue_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ip_queue_show, NULL);
+}
+
+static const struct file_operations ip_queue_proc_fops = {
+	.open		= ip_queue_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
 
 static struct nf_queue_handler nfqh = {
 	.name	= "ip_queue",
@@ -661,10 +663,11 @@
 		goto cleanup_netlink_notifier;
 	}
 
-	proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info);
-	if (proc)
+	proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
+	if (proc) {
 		proc->owner = THIS_MODULE;
-	else {
+		proc->proc_fops = &ip_queue_proc_fops;
+	} else {
 		printk(KERN_ERR "ip_queue: failed to create proc entry\n");
 		goto cleanup_ipqnl;
 	}
diff --git a/net/ipv4/netfilter/nf_nat_amanda.c b/net/ipv4/netfilter/nf_nat_amanda.c
index 35a5aa6..c31b876 100644
--- a/net/ipv4/netfilter/nf_nat_amanda.c
+++ b/net/ipv4/netfilter/nf_nat_amanda.c
@@ -69,7 +69,7 @@
 
 static int __init nf_nat_amanda_init(void)
 {
-	BUG_ON(rcu_dereference(nf_nat_amanda_hook));
+	BUG_ON(nf_nat_amanda_hook != NULL);
 	rcu_assign_pointer(nf_nat_amanda_hook, help);
 	return 0;
 }
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 56e93f6..70e7997 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -681,7 +681,7 @@
 
 	if (!nat)
 		return 0;
-	memset(nat, 0, sizeof(nat));
+	memset(nat, 0, sizeof(*nat));
 	i->status &= ~(IPS_NAT_MASK | IPS_NAT_DONE_MASK | IPS_SEQ_ADJUST);
 	return 0;
 }
diff --git a/net/ipv4/netfilter/nf_nat_ftp.c b/net/ipv4/netfilter/nf_nat_ftp.c
index e1a16d3..a1d5d58 100644
--- a/net/ipv4/netfilter/nf_nat_ftp.c
+++ b/net/ipv4/netfilter/nf_nat_ftp.c
@@ -147,7 +147,7 @@
 
 static int __init nf_nat_ftp_init(void)
 {
-	BUG_ON(rcu_dereference(nf_nat_ftp_hook));
+	BUG_ON(nf_nat_ftp_hook != NULL);
 	rcu_assign_pointer(nf_nat_ftp_hook, nf_nat_ftp);
 	return 0;
 }
diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c
index a868c8c..93e18ef 100644
--- a/net/ipv4/netfilter/nf_nat_h323.c
+++ b/net/ipv4/netfilter/nf_nat_h323.c
@@ -544,15 +544,15 @@
 /****************************************************************************/
 static int __init init(void)
 {
-	BUG_ON(rcu_dereference(set_h245_addr_hook) != NULL);
-	BUG_ON(rcu_dereference(set_h225_addr_hook) != NULL);
-	BUG_ON(rcu_dereference(set_sig_addr_hook) != NULL);
-	BUG_ON(rcu_dereference(set_ras_addr_hook) != NULL);
-	BUG_ON(rcu_dereference(nat_rtp_rtcp_hook) != NULL);
-	BUG_ON(rcu_dereference(nat_t120_hook) != NULL);
-	BUG_ON(rcu_dereference(nat_h245_hook) != NULL);
-	BUG_ON(rcu_dereference(nat_callforwarding_hook) != NULL);
-	BUG_ON(rcu_dereference(nat_q931_hook) != NULL);
+	BUG_ON(set_h245_addr_hook != NULL);
+	BUG_ON(set_h225_addr_hook != NULL);
+	BUG_ON(set_sig_addr_hook != NULL);
+	BUG_ON(set_ras_addr_hook != NULL);
+	BUG_ON(nat_rtp_rtcp_hook != NULL);
+	BUG_ON(nat_t120_hook != NULL);
+	BUG_ON(nat_h245_hook != NULL);
+	BUG_ON(nat_callforwarding_hook != NULL);
+	BUG_ON(nat_q931_hook != NULL);
 
 	rcu_assign_pointer(set_h245_addr_hook, set_h245_addr);
 	rcu_assign_pointer(set_h225_addr_hook, set_h225_addr);
diff --git a/net/ipv4/netfilter/nf_nat_irc.c b/net/ipv4/netfilter/nf_nat_irc.c
index 766e2c1..fe6f9ce 100644
--- a/net/ipv4/netfilter/nf_nat_irc.c
+++ b/net/ipv4/netfilter/nf_nat_irc.c
@@ -74,7 +74,7 @@
 
 static int __init nf_nat_irc_init(void)
 {
-	BUG_ON(rcu_dereference(nf_nat_irc_hook));
+	BUG_ON(nf_nat_irc_hook != NULL);
 	rcu_assign_pointer(nf_nat_irc_hook, help);
 	return 0;
 }
diff --git a/net/ipv4/netfilter/nf_nat_pptp.c b/net/ipv4/netfilter/nf_nat_pptp.c
index e1385a0..6817e79 100644
--- a/net/ipv4/netfilter/nf_nat_pptp.c
+++ b/net/ipv4/netfilter/nf_nat_pptp.c
@@ -281,16 +281,16 @@
 {
 	nf_nat_need_gre();
 
-	BUG_ON(rcu_dereference(nf_nat_pptp_hook_outbound));
+	BUG_ON(nf_nat_pptp_hook_outbound != NULL);
 	rcu_assign_pointer(nf_nat_pptp_hook_outbound, pptp_outbound_pkt);
 
-	BUG_ON(rcu_dereference(nf_nat_pptp_hook_inbound));
+	BUG_ON(nf_nat_pptp_hook_inbound != NULL);
 	rcu_assign_pointer(nf_nat_pptp_hook_inbound, pptp_inbound_pkt);
 
-	BUG_ON(rcu_dereference(nf_nat_pptp_hook_exp_gre));
+	BUG_ON(nf_nat_pptp_hook_exp_gre != NULL);
 	rcu_assign_pointer(nf_nat_pptp_hook_exp_gre, pptp_exp_gre);
 
-	BUG_ON(rcu_dereference(nf_nat_pptp_hook_expectfn));
+	BUG_ON(nf_nat_pptp_hook_expectfn != NULL);
 	rcu_assign_pointer(nf_nat_pptp_hook_expectfn, pptp_nat_expected);
 	return 0;
 }
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index ce9edbc..3ca9897 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -293,8 +293,8 @@
 
 static int __init nf_nat_sip_init(void)
 {
-	BUG_ON(rcu_dereference(nf_nat_sip_hook));
-	BUG_ON(rcu_dereference(nf_nat_sdp_hook));
+	BUG_ON(nf_nat_sip_hook != NULL);
+	BUG_ON(nf_nat_sdp_hook != NULL);
 	rcu_assign_pointer(nf_nat_sip_hook, ip_nat_sip);
 	rcu_assign_pointer(nf_nat_sdp_hook, ip_nat_sdp);
 	return 0;
diff --git a/net/ipv4/netfilter/nf_nat_tftp.c b/net/ipv4/netfilter/nf_nat_tftp.c
index 0ecec70..1360a94 100644
--- a/net/ipv4/netfilter/nf_nat_tftp.c
+++ b/net/ipv4/netfilter/nf_nat_tftp.c
@@ -43,7 +43,7 @@
 
 static int __init nf_nat_tftp_init(void)
 {
-	BUG_ON(rcu_dereference(nf_nat_tftp_hook));
+	BUG_ON(nf_nat_tftp_hook != NULL);
 	rcu_assign_pointer(nf_nat_tftp_hook, help);
 	return 0;
 }
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index ffdccc0..ce34b28 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -46,17 +46,6 @@
 #include <net/sock.h>
 #include <net/raw.h>
 
-static int fold_prot_inuse(struct proto *proto)
-{
-	int res = 0;
-	int cpu;
-
-	for_each_possible_cpu(cpu)
-		res += proto->stats[cpu].inuse;
-
-	return res;
-}
-
 /*
  *	Report socket allocation statistics [mea@utu.fi]
  */
@@ -64,12 +53,12 @@
 {
 	socket_seq_show(seq);
 	seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n",
-		   fold_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count),
+		   sock_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count),
 		   tcp_death_row.tw_count, atomic_read(&tcp_sockets_allocated),
 		   atomic_read(&tcp_memory_allocated));
-	seq_printf(seq, "UDP: inuse %d\n", fold_prot_inuse(&udp_prot));
-	seq_printf(seq, "UDPLITE: inuse %d\n", fold_prot_inuse(&udplite_prot));
-	seq_printf(seq, "RAW: inuse %d\n", fold_prot_inuse(&raw_prot));
+	seq_printf(seq, "UDP: inuse %d\n", sock_prot_inuse(&udp_prot));
+	seq_printf(seq, "UDPLITE: inuse %d\n", sock_prot_inuse(&udplite_prot));
+	seq_printf(seq, "RAW: inuse %d\n", sock_prot_inuse(&raw_prot));
 	seq_printf(seq,  "FRAG: inuse %d memory %d\n",
 			ip_frag_nqueues(), ip_frag_mem());
 	return 0;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 3916fac..66b42f5 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -760,6 +760,8 @@
 	}
 }
 
+DEFINE_PROTO_INUSE(raw)
+
 struct proto raw_prot = {
 	.name		   = "RAW",
 	.owner		   = THIS_MODULE,
@@ -781,6 +783,7 @@
 	.compat_setsockopt = compat_raw_setsockopt,
 	.compat_getsockopt = compat_raw_getsockopt,
 #endif
+	REF_PROTO_INUSE(raw)
 };
 
 #ifdef CONFIG_PROC_FS
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 21b12de..1bff9ed 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -578,6 +578,9 @@
 		i = (i + 1) & rt_hash_mask;
 		rthp = &rt_hash_table[i].chain;
 
+		if (need_resched())
+			cond_resched();
+
 		if (*rthp == NULL)
 			continue;
 		spin_lock_bh(rt_hash_lock_addr(i));
@@ -851,9 +854,7 @@
 			 */
 			rcu_assign_pointer(rt_hash_table[hash].chain, rth);
 
-			rth->u.dst.__use++;
-			dst_hold(&rth->u.dst);
-			rth->u.dst.lastuse = now;
+			dst_use(&rth->u.dst, now);
 			spin_unlock_bh(rt_hash_lock_addr(hash));
 
 			rt_drop(rt);
@@ -1813,11 +1814,6 @@
 		goto martian_destination;
 
 	err = ip_mkroute_input(skb, &res, &fl, in_dev, daddr, saddr, tos);
-	if (err == -ENOBUFS)
-		goto e_nobufs;
-	if (err == -EINVAL)
-		goto e_inval;
-
 done:
 	in_dev_put(in_dev);
 	if (free_res)
@@ -1935,9 +1931,7 @@
 		    rth->fl.oif == 0 &&
 		    rth->fl.mark == skb->mark &&
 		    rth->fl.fl4_tos == tos) {
-			rth->u.dst.lastuse = jiffies;
-			dst_hold(&rth->u.dst);
-			rth->u.dst.__use++;
+			dst_use(&rth->u.dst, jiffies);
 			RT_CACHE_STAT_INC(in_hit);
 			rcu_read_unlock();
 			skb->dst = (struct dst_entry*)rth;
@@ -2331,9 +2325,7 @@
 		    rth->fl.mark == flp->mark &&
 		    !((rth->fl.fl4_tos ^ flp->fl4_tos) &
 			    (IPTOS_RT_MASK | RTO_ONLINK))) {
-			rth->u.dst.lastuse = jiffies;
-			dst_hold(&rth->u.dst);
-			rth->u.dst.__use++;
+			dst_use(&rth->u.dst, jiffies);
 			RT_CACHE_STAT_INC(out_hit);
 			rcu_read_unlock_bh();
 			*rp = rth;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index c64072b..8e65182 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2456,11 +2456,11 @@
 					thash_entries ? 0 : 512 * 1024);
 	tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
 	for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
-		rwlock_init(&tcp_hashinfo.ehash[i].lock);
 		INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].chain);
 		INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].twchain);
 	}
-
+	if (inet_ehash_locks_alloc(&tcp_hashinfo))
+		panic("TCP: failed to alloc ehash_locks");
 	tcp_hashinfo.bhash =
 		alloc_large_system_hash("TCP bind",
 					sizeof(struct inet_bind_hashbucket),
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ca9590f..0f0c1c9 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1269,6 +1269,9 @@
 	if (before(TCP_SKB_CB(ack_skb)->ack_seq, prior_snd_una - tp->max_window))
 		return 0;
 
+	if (!tp->packets_out)
+		goto out;
+
 	/* SACK fastpath:
 	 * if the only SACK change is the increase of the end_seq of
 	 * the first block then only apply that SACK block
@@ -1400,11 +1403,9 @@
 			/* DSACK info lost if out-of-mem, try SACK still */
 			if (in_sack <= 0)
 				in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq);
-			if (in_sack < 0)
+			if (unlikely(in_sack < 0))
 				break;
 
-			fack_count += tcp_skb_pcount(skb);
-
 			sacked = TCP_SKB_CB(skb)->sacked;
 
 			/* Account D-SACK for retransmitted packet. */
@@ -1419,19 +1420,17 @@
 					if ((dup_sack && in_sack) &&
 					    (sacked&TCPCB_SACKED_ACKED))
 						reord = min(fack_count, reord);
-				} else {
-					/* If it was in a hole, we detected reordering. */
-					if (fack_count < prior_fackets &&
-					    !(sacked&TCPCB_SACKED_ACKED))
-						reord = min(fack_count, reord);
 				}
 
 				/* Nothing to do; acked frame is about to be dropped. */
+				fack_count += tcp_skb_pcount(skb);
 				continue;
 			}
 
-			if (!in_sack)
+			if (!in_sack) {
+				fack_count += tcp_skb_pcount(skb);
 				continue;
+			}
 
 			if (!(sacked&TCPCB_SACKED_ACKED)) {
 				if (sacked & TCPCB_SACKED_RETRANS) {
@@ -1448,12 +1447,17 @@
 						tp->retransmit_skb_hint = NULL;
 					}
 				} else {
-					/* New sack for not retransmitted frame,
-					 * which was in hole. It is reordering.
-					 */
-					if (!(sacked & TCPCB_RETRANS) &&
-					    fack_count < prior_fackets)
-						reord = min(fack_count, reord);
+					if (!(sacked & TCPCB_RETRANS)) {
+						/* New sack for not retransmitted frame,
+						 * which was in hole. It is reordering.
+						 */
+						if (fack_count < prior_fackets)
+							reord = min(fack_count, reord);
+
+						/* SACK enhanced F-RTO (RFC4138; Appendix B) */
+						if (!after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark))
+							flag |= FLAG_ONLY_ORIG_SACKED;
+					}
 
 					if (sacked & TCPCB_LOST) {
 						TCP_SKB_CB(skb)->sacked &= ~TCPCB_LOST;
@@ -1462,24 +1466,13 @@
 						/* clear lost hint */
 						tp->retransmit_skb_hint = NULL;
 					}
-					/* SACK enhanced F-RTO detection.
-					 * Set flag if and only if non-rexmitted
-					 * segments below frto_highmark are
-					 * SACKed (RFC4138; Appendix B).
-					 * Clearing correct due to in-order walk
-					 */
-					if (after(end_seq, tp->frto_highmark)) {
-						flag &= ~FLAG_ONLY_ORIG_SACKED;
-					} else {
-						if (!(sacked & TCPCB_RETRANS))
-							flag |= FLAG_ONLY_ORIG_SACKED;
-					}
 				}
 
 				TCP_SKB_CB(skb)->sacked |= TCPCB_SACKED_ACKED;
 				flag |= FLAG_DATA_SACKED;
 				tp->sacked_out += tcp_skb_pcount(skb);
 
+				fack_count += tcp_skb_pcount(skb);
 				if (fack_count > tp->fackets_out)
 					tp->fackets_out = fack_count;
 
@@ -1490,6 +1483,8 @@
 			} else {
 				if (dup_sack && (sacked&TCPCB_RETRANS))
 					reord = min(fack_count, reord);
+
+				fack_count += tcp_skb_pcount(skb);
 			}
 
 			/* D-SACK. We can detect redundant retransmission
@@ -1504,6 +1499,12 @@
 				tp->retransmit_skb_hint = NULL;
 			}
 		}
+
+		/* SACK enhanced FRTO (RFC4138, Appendix B): Clearing correct
+		 * due to in-order walk
+		 */
+		if (after(end_seq, tp->frto_highmark))
+			flag &= ~FLAG_ONLY_ORIG_SACKED;
 	}
 
 	if (tp->retrans_out &&
@@ -1515,7 +1516,9 @@
 
 	if ((reord < tp->fackets_out) && icsk->icsk_ca_state != TCP_CA_Loss &&
 	    (!tp->frto_highmark || after(tp->snd_una, tp->frto_highmark)))
-		tcp_update_reordering(sk, ((tp->fackets_out + 1) - reord), 0);
+		tcp_update_reordering(sk, tp->fackets_out - reord, 0);
+
+out:
 
 #if FASTRETRANS_DEBUG > 0
 	BUG_TRAP((int)tp->sacked_out >= 0);
@@ -1671,6 +1674,9 @@
 	}
 	tcp_verify_left_out(tp);
 
+	/* Too bad if TCP was application limited */
+	tp->snd_cwnd = min(tp->snd_cwnd, tcp_packets_in_flight(tp) + 1);
+
 	/* Earlier loss recovery underway (see RFC4138; Appendix B).
 	 * The last condition is necessary at least in tp->frto_counter case.
 	 */
@@ -1703,6 +1709,8 @@
 	tcp_for_write_queue(skb, sk) {
 		if (skb == tcp_send_head(sk))
 			break;
+
+		TCP_SKB_CB(skb)->sacked &= ~TCPCB_LOST;
 		/*
 		 * Count the retransmission made on RTO correctly (only when
 		 * waiting for the first ACK and did not get it)...
@@ -1716,7 +1724,7 @@
 		} else {
 			if (TCP_SKB_CB(skb)->sacked & TCPCB_RETRANS)
 				tp->undo_marker = 0;
-			TCP_SKB_CB(skb)->sacked &= ~(TCPCB_LOST|TCPCB_SACKED_RETRANS);
+			TCP_SKB_CB(skb)->sacked &= ~TCPCB_SACKED_RETRANS;
 		}
 
 		/* Don't lost mark skbs that were fwd transmitted after RTO */
@@ -2630,7 +2638,8 @@
  * is before the ack sequence we can discard it as it's confirmed to have
  * arrived at the other end.
  */
-static int tcp_clean_rtx_queue(struct sock *sk, s32 *seq_rtt_p)
+static int tcp_clean_rtx_queue(struct sock *sk, s32 *seq_rtt_p,
+			       int prior_fackets)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	const struct inet_connection_sock *icsk = inet_csk(sk);
@@ -2639,6 +2648,8 @@
 	int fully_acked = 1;
 	int flag = 0;
 	int prior_packets = tp->packets_out;
+	u32 cnt = 0;
+	u32 reord = tp->packets_out;
 	s32 seq_rtt = -1;
 	ktime_t last_ackt = net_invalid_timestamp();
 
@@ -2679,10 +2690,14 @@
 				if ((flag & FLAG_DATA_ACKED) ||
 				    (packets_acked > 1))
 					flag |= FLAG_NONHEAD_RETRANS_ACKED;
-			} else if (seq_rtt < 0) {
-				seq_rtt = now - scb->when;
-				if (fully_acked)
-					last_ackt = skb->tstamp;
+			} else {
+				if (seq_rtt < 0) {
+					seq_rtt = now - scb->when;
+					if (fully_acked)
+						last_ackt = skb->tstamp;
+				}
+				if (!(sacked & TCPCB_SACKED_ACKED))
+					reord = min(cnt, reord);
 			}
 
 			if (sacked & TCPCB_SACKED_ACKED)
@@ -2693,12 +2708,16 @@
 			if ((sacked & TCPCB_URG) && tp->urg_mode &&
 			    !before(end_seq, tp->snd_up))
 				tp->urg_mode = 0;
-		} else if (seq_rtt < 0) {
-			seq_rtt = now - scb->when;
-			if (fully_acked)
-				last_ackt = skb->tstamp;
+		} else {
+			if (seq_rtt < 0) {
+				seq_rtt = now - scb->when;
+				if (fully_acked)
+					last_ackt = skb->tstamp;
+			}
+			reord = min(cnt, reord);
 		}
 		tp->packets_out -= packets_acked;
+		cnt += packets_acked;
 
 		/* Initial outgoing SYN's get put onto the write_queue
 		 * just like anything else we transmit.  It is not
@@ -2730,13 +2749,18 @@
 		tcp_ack_update_rtt(sk, flag, seq_rtt);
 		tcp_rearm_rto(sk);
 
+		if (tcp_is_reno(tp)) {
+			tcp_remove_reno_sacks(sk, pkts_acked);
+		} else {
+			/* Non-retransmitted hole got filled? That's reordering */
+			if (reord < prior_fackets)
+				tcp_update_reordering(sk, tp->fackets_out - reord, 0);
+		}
+
 		tp->fackets_out -= min(pkts_acked, tp->fackets_out);
 		/* hint's skb might be NULL but we don't need to care */
 		tp->fastpath_cnt_hint -= min_t(u32, pkts_acked,
 					       tp->fastpath_cnt_hint);
-		if (tcp_is_reno(tp))
-			tcp_remove_reno_sacks(sk, pkts_acked);
-
 		if (ca_ops->pkts_acked) {
 			s32 rtt_us = -1;
 
@@ -3019,6 +3043,7 @@
 	u32 ack_seq = TCP_SKB_CB(skb)->seq;
 	u32 ack = TCP_SKB_CB(skb)->ack_seq;
 	u32 prior_in_flight;
+	u32 prior_fackets;
 	s32 seq_rtt;
 	int prior_packets;
 	int frto_cwnd = 0;
@@ -3043,6 +3068,8 @@
 			tp->bytes_acked += min(ack - prior_snd_una, tp->mss_cache);
 	}
 
+	prior_fackets = tp->fackets_out;
+
 	if (!(flag&FLAG_SLOWPATH) && after(ack, prior_snd_una)) {
 		/* Window is constant, pure forward advance.
 		 * No more checks are required.
@@ -3084,13 +3111,13 @@
 	prior_in_flight = tcp_packets_in_flight(tp);
 
 	/* See if we can take anything off of the retransmit queue. */
-	flag |= tcp_clean_rtx_queue(sk, &seq_rtt);
+	flag |= tcp_clean_rtx_queue(sk, &seq_rtt, prior_fackets);
 
+	if (tp->frto_counter)
+		frto_cwnd = tcp_process_frto(sk, flag);
 	/* Guarantee sacktag reordering detection against wrap-arounds */
 	if (before(tp->frto_highmark, tp->snd_una))
 		tp->frto_highmark = 0;
-	if (tp->frto_counter)
-		frto_cwnd = tcp_process_frto(sk, flag);
 
 	if (tcp_ack_is_dubious(sk, flag)) {
 		/* Advance CWND, if state allows this. */
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index d438dfb..e566f3c 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2049,8 +2049,9 @@
 		struct sock *sk;
 		struct hlist_node *node;
 		struct inet_timewait_sock *tw;
+		rwlock_t *lock = inet_ehash_lockp(&tcp_hashinfo, st->bucket);
 
-		read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+		read_lock_bh(lock);
 		sk_for_each(sk, node, &tcp_hashinfo.ehash[st->bucket].chain) {
 			if (sk->sk_family != st->family) {
 				continue;
@@ -2067,7 +2068,7 @@
 			rc = tw;
 			goto out;
 		}
-		read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+		read_unlock_bh(lock);
 		st->state = TCP_SEQ_STATE_ESTABLISHED;
 	}
 out:
@@ -2094,11 +2095,11 @@
 			cur = tw;
 			goto out;
 		}
-		read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+		read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
 		st->state = TCP_SEQ_STATE_ESTABLISHED;
 
 		if (++st->bucket < tcp_hashinfo.ehash_size) {
-			read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+			read_lock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
 			sk = sk_head(&tcp_hashinfo.ehash[st->bucket].chain);
 		} else {
 			cur = NULL;
@@ -2206,7 +2207,7 @@
 	case TCP_SEQ_STATE_TIME_WAIT:
 	case TCP_SEQ_STATE_ESTABLISHED:
 		if (v)
-			read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+			read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
 		break;
 	}
 }
@@ -2417,6 +2418,8 @@
 }
 #endif /* CONFIG_PROC_FS */
 
+DEFINE_PROTO_INUSE(tcp)
+
 struct proto tcp_prot = {
 	.name			= "TCP",
 	.owner			= THIS_MODULE,
@@ -2451,6 +2454,7 @@
 	.compat_setsockopt	= compat_tcp_setsockopt,
 	.compat_getsockopt	= compat_tcp_getsockopt,
 #endif
+	REF_PROTO_INUSE(tcp)
 };
 
 void __init tcp_v4_init(struct net_proto_family *ops)
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
index a794a8c..978b3fd 100644
--- a/net/ipv4/tunnel4.c
+++ b/net/ipv4/tunnel4.c
@@ -17,6 +17,11 @@
 static struct xfrm_tunnel *tunnel64_handlers;
 static DEFINE_MUTEX(tunnel4_mutex);
 
+static inline struct xfrm_tunnel **fam_handlers(unsigned short family)
+{
+	return (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers;
+}
+
 int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family)
 {
 	struct xfrm_tunnel **pprev;
@@ -25,8 +30,7 @@
 
 	mutex_lock(&tunnel4_mutex);
 
-	for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers;
-	     *pprev; pprev = &(*pprev)->next) {
+	for (pprev = fam_handlers(family); *pprev; pprev = &(*pprev)->next) {
 		if ((*pprev)->priority > priority)
 			break;
 		if ((*pprev)->priority == priority)
@@ -53,8 +57,7 @@
 
 	mutex_lock(&tunnel4_mutex);
 
-	for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers;
-	     *pprev; pprev = &(*pprev)->next) {
+	for (pprev = fam_handlers(family); *pprev; pprev = &(*pprev)->next) {
 		if (*pprev == handler) {
 			*pprev = handler->next;
 			ret = 0;
@@ -118,6 +121,17 @@
 			break;
 }
 
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static void tunnel64_err(struct sk_buff *skb, u32 info)
+{
+	struct xfrm_tunnel *handler;
+
+	for (handler = tunnel64_handlers; handler; handler = handler->next)
+		if (!handler->err_handler(skb, info))
+			break;
+}
+#endif
+
 static struct net_protocol tunnel4_protocol = {
 	.handler	=	tunnel4_rcv,
 	.err_handler	=	tunnel4_err,
@@ -127,7 +141,7 @@
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 static struct net_protocol tunnel64_protocol = {
 	.handler	=	tunnel64_rcv,
-	.err_handler	=	tunnel4_err,
+	.err_handler	=	tunnel64_err,
 	.no_policy	=	1,
 };
 #endif
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 4bc25b4..03c400c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1430,6 +1430,8 @@
 
 }
 
+DEFINE_PROTO_INUSE(udp)
+
 struct proto udp_prot = {
 	.name		   = "UDP",
 	.owner		   = THIS_MODULE,
@@ -1452,6 +1454,7 @@
 	.compat_setsockopt = compat_udp_setsockopt,
 	.compat_getsockopt = compat_udp_getsockopt,
 #endif
+	REF_PROTO_INUSE(udp)
 };
 
 /* ------------------------------------------------------------------------ */
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index 9497720..f5baeb3 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -44,6 +44,8 @@
 	.no_policy	= 1,
 };
 
+DEFINE_PROTO_INUSE(udplite)
+
 struct proto 	udplite_prot = {
 	.name		   = "UDP-Lite",
 	.owner		   = THIS_MODULE,
@@ -67,6 +69,7 @@
 	.compat_setsockopt = compat_udp_setsockopt,
 	.compat_getsockopt = compat_udp_getsockopt,
 #endif
+	REF_PROTO_INUSE(udplite)
 };
 
 static struct inet_protosw udplite4_protosw = {
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 706622a..428c6b0 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -31,25 +31,6 @@
 
 static struct fib_rules_ops fib6_rules_ops;
 
-static struct fib6_rule main_rule = {
-	.common = {
-		.refcnt =	ATOMIC_INIT(2),
-		.pref =		0x7FFE,
-		.action =	FR_ACT_TO_TBL,
-		.table =	RT6_TABLE_MAIN,
-	},
-};
-
-static struct fib6_rule local_rule = {
-	.common = {
-		.refcnt =	ATOMIC_INIT(2),
-		.pref =		0,
-		.action =	FR_ACT_TO_TBL,
-		.table =	RT6_TABLE_LOCAL,
-		.flags =	FIB_RULE_PERMANENT,
-	},
-};
-
 struct dst_entry *fib6_rule_lookup(struct flowi *fl, int flags,
 				   pol_lookup_t lookup)
 {
@@ -270,11 +251,23 @@
 	.owner			= THIS_MODULE,
 };
 
+static int __init fib6_default_rules_init(void)
+{
+	int err;
+
+	err = fib_default_rule_add(&fib6_rules_ops, 0,
+				   RT6_TABLE_LOCAL, FIB_RULE_PERMANENT);
+	if (err < 0)
+		return err;
+	err = fib_default_rule_add(&fib6_rules_ops, 0x7FFE, RT6_TABLE_MAIN, 0);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
 void __init fib6_rules_init(void)
 {
-	list_add_tail(&local_rule.common.list, &fib6_rules_ops.rules_list);
-	list_add_tail(&main_rule.common.list, &fib6_rules_ops.rules_list);
-
+	BUG_ON(fib6_default_rules_init());
 	fib_rules_register(&fib6_rules_ops);
 }
 
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index d6f1026..adc73ad 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -37,9 +37,8 @@
 	} else {
 		unsigned int hash;
 		sk->sk_hash = hash = inet6_sk_ehashfn(sk);
-		hash &= (hashinfo->ehash_size - 1);
-		list = &hashinfo->ehash[hash].chain;
-		lock = &hashinfo->ehash[hash].lock;
+		list = &inet_ehash_bucket(hashinfo, hash)->chain;
+		lock = inet_ehash_lockp(hashinfo, hash);
 		write_lock(lock);
 	}
 
@@ -70,9 +69,10 @@
 	 */
 	unsigned int hash = inet6_ehashfn(daddr, hnum, saddr, sport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash);
+	rwlock_t *lock = inet_ehash_lockp(hashinfo, hash);
 
 	prefetch(head->chain.first);
-	read_lock(&head->lock);
+	read_lock(lock);
 	sk_for_each(sk, node, &head->chain) {
 		/* For IPV6 do the cheaper port and family tests first. */
 		if (INET6_MATCH(sk, hash, saddr, daddr, ports, dif))
@@ -92,12 +92,12 @@
 				goto hit;
 		}
 	}
-	read_unlock(&head->lock);
+	read_unlock(lock);
 	return NULL;
 
 hit:
 	sock_hold(sk);
-	read_unlock(&head->lock);
+	read_unlock(lock);
 	return sk;
 }
 EXPORT_SYMBOL(__inet6_lookup_established);
@@ -175,12 +175,13 @@
 	const unsigned int hash = inet6_ehashfn(daddr, lport, saddr,
 						inet->dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
+	rwlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
 	const struct hlist_node *node;
 	struct inet_timewait_sock *tw;
 
 	prefetch(head->chain.first);
-	write_lock(&head->lock);
+	write_lock(lock);
 
 	/* Check TIME-WAIT sockets first. */
 	sk_for_each(sk2, node, &head->twchain) {
@@ -216,7 +217,7 @@
 	__sk_add_node(sk, &head->chain);
 	sk->sk_hash = hash;
 	sock_prot_inc_use(sk->sk_prot);
-	write_unlock(&head->lock);
+	write_unlock(lock);
 
 	if (twp != NULL) {
 		*twp = tw;
@@ -231,7 +232,7 @@
 	return 0;
 
 not_unique:
-	write_unlock(&head->lock);
+	write_unlock(lock);
 	return -EADDRNOTAVAIL;
 }
 
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 653fc0a..86e1835 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1339,6 +1339,19 @@
 	return err;
 }
 
+static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
+{
+	inet->cork.flags &= ~IPCORK_OPT;
+	kfree(np->cork.opt);
+	np->cork.opt = NULL;
+	if (np->cork.rt) {
+		dst_release(&np->cork.rt->u.dst);
+		np->cork.rt = NULL;
+		inet->cork.flags &= ~IPCORK_ALLFRAG;
+	}
+	memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+}
+
 int ip6_push_pending_frames(struct sock *sk)
 {
 	struct sk_buff *skb, *tmp_skb;
@@ -1415,15 +1428,7 @@
 	}
 
 out:
-	inet->cork.flags &= ~IPCORK_OPT;
-	kfree(np->cork.opt);
-	np->cork.opt = NULL;
-	if (np->cork.rt) {
-		dst_release(&np->cork.rt->u.dst);
-		np->cork.rt = NULL;
-		inet->cork.flags &= ~IPCORK_ALLFRAG;
-	}
-	memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+	ip6_cork_release(inet, np);
 	return err;
 error:
 	goto out;
@@ -1431,8 +1436,6 @@
 
 void ip6_flush_pending_frames(struct sock *sk)
 {
-	struct inet_sock *inet = inet_sk(sk);
-	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct sk_buff *skb;
 
 	while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) {
@@ -1442,14 +1445,5 @@
 		kfree_skb(skb);
 	}
 
-	inet->cork.flags &= ~IPCORK_OPT;
-
-	kfree(np->cork.opt);
-	np->cork.opt = NULL;
-	if (np->cork.rt) {
-		dst_release(&np->cork.rt->u.dst);
-		np->cork.rt = NULL;
-		inet->cork.flags &= ~IPCORK_ALLFRAG;
-	}
-	memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+	ip6_cork_release(inet_sk(sk), inet6_sk(sk));
 }
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 85eb479..0cd4056 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -36,6 +36,7 @@
 #include <net/ipcomp.h>
 #include <asm/semaphore.h>
 #include <linux/crypto.h>
+#include <linux/err.h>
 #include <linux/pfkeyv2.h>
 #include <linux/random.h>
 #include <linux/percpu.h>
@@ -358,7 +359,7 @@
 	for_each_possible_cpu(cpu) {
 		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
 							    CRYPTO_ALG_ASYNC);
-		if (!tfm)
+		if (IS_ERR(tfm))
 			goto error;
 		*per_cpu_ptr(tfms, cpu) = tfm;
 	}
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 36f7dbf..67997a7 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1037,6 +1037,7 @@
 
 	ndmsg = nlmsg_data(nlh);
 	ndmsg->nduseropt_family = AF_INET6;
+	ndmsg->nduseropt_ifindex = ra->dev->ifindex;
 	ndmsg->nduseropt_icmp_type = icmp6h->icmp6_type;
 	ndmsg->nduseropt_icmp_code = icmp6h->icmp6_code;
 	ndmsg->nduseropt_opts_len = opt->nd_opt_len << 3;
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index 4513eab..e789ec4 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -4,25 +4,29 @@
 
 # Link order matters here.
 obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
-obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
-obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o
-obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
-obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o
-obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
-obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o
-obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o
 obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
 obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
-obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
 obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
-obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
 obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
-obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
-obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o
-obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o
 
 # objects for l3 independent conntrack
 nf_conntrack_ipv6-objs  :=  nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o nf_conntrack_reasm.o
 
 # l3 independent conntrack
 obj-$(CONFIG_NF_CONNTRACK_IPV6) += nf_conntrack_ipv6.o
+
+# matches
+obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
+obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o
+obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o
+obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
+obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
+obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o
+obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o
+obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o
+obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
+
+# targets
+obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
+obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
+obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 6413a30..e273605 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/sysctl.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/mutex.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
@@ -596,15 +597,11 @@
 	{ .ctl_name = 0 }
 };
 
-#ifdef CONFIG_PROC_FS
-static int
-ipq_get_info(char *buffer, char **start, off_t offset, int length)
+static int ip6_queue_show(struct seq_file *m, void *v)
 {
-	int len;
-
 	read_lock_bh(&queue_lock);
 
-	len = sprintf(buffer,
+	seq_printf(m,
 		      "Peer PID          : %d\n"
 		      "Copy mode         : %hu\n"
 		      "Copy range        : %u\n"
@@ -621,16 +618,21 @@
 		      queue_user_dropped);
 
 	read_unlock_bh(&queue_lock);
-
-	*start = buffer + offset;
-	len -= offset;
-	if (len > length)
-		len = length;
-	else if (len < 0)
-		len = 0;
-	return len;
+	return 0;
 }
-#endif /* CONFIG_PROC_FS */
+
+static int ip6_queue_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ip6_queue_show, NULL);
+}
+
+static const struct file_operations ip6_queue_proc_fops = {
+	.open		= ip6_queue_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
 
 static struct nf_queue_handler nfqh = {
 	.name	= "ip6_queue",
@@ -650,10 +652,11 @@
 		goto cleanup_netlink_notifier;
 	}
 
-	proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info);
-	if (proc)
+	proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
+	if (proc) {
 		proc->owner = THIS_MODULE;
-	else {
+		proc->proc_fops = &ip6_queue_proc_fops;
+	} else {
 		printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
 		goto cleanup_ipqnl;
 	}
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index be526ad..8631ed7 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -32,27 +32,16 @@
 
 static struct proc_dir_entry *proc_net_devsnmp6;
 
-static int fold_prot_inuse(struct proto *proto)
-{
-	int res = 0;
-	int cpu;
-
-	for_each_possible_cpu(cpu)
-		res += proto->stats[cpu].inuse;
-
-	return res;
-}
-
 static int sockstat6_seq_show(struct seq_file *seq, void *v)
 {
 	seq_printf(seq, "TCP6: inuse %d\n",
-		       fold_prot_inuse(&tcpv6_prot));
+		       sock_prot_inuse(&tcpv6_prot));
 	seq_printf(seq, "UDP6: inuse %d\n",
-		       fold_prot_inuse(&udpv6_prot));
+		       sock_prot_inuse(&udpv6_prot));
 	seq_printf(seq, "UDPLITE6: inuse %d\n",
-			fold_prot_inuse(&udplitev6_prot));
+			sock_prot_inuse(&udplitev6_prot));
 	seq_printf(seq, "RAW6: inuse %d\n",
-		       fold_prot_inuse(&rawv6_prot));
+		       sock_prot_inuse(&rawv6_prot));
 	seq_printf(seq, "FRAG6: inuse %d memory %d\n",
 		       ip6_frag_nqueues(), ip6_frag_mem());
 	return 0;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index ca24ef1..807260d 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -1144,6 +1144,8 @@
 	return(0);
 }
 
+DEFINE_PROTO_INUSE(rawv6)
+
 struct proto rawv6_prot = {
 	.name		   = "RAWv6",
 	.owner		   = THIS_MODULE,
@@ -1166,6 +1168,7 @@
 	.compat_setsockopt = compat_rawv6_setsockopt,
 	.compat_getsockopt = compat_rawv6_getsockopt,
 #endif
+	REF_PROTO_INUSE(rawv6)
 };
 
 #ifdef CONFIG_PROC_FS
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 95f8e4a..6ecb5e6 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -38,12 +38,8 @@
 #include <linux/in6.h>
 #include <linux/init.h>
 #include <linux/if_arp.h>
-
-#ifdef 	CONFIG_PROC_FS
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#endif
-
 #include <net/net_namespace.h>
 #include <net/snmp.h>
 #include <net/ipv6.h>
@@ -548,12 +544,8 @@
 	rt = rt6_device_match(rt, fl->oif, flags);
 	BACKTRACK(&fl->fl6_src);
 out:
-	dst_hold(&rt->u.dst);
+	dst_use(&rt->u.dst, jiffies);
 	read_unlock_bh(&table->tb6_lock);
-
-	rt->u.dst.lastuse = jiffies;
-	rt->u.dst.__use++;
-
 	return rt;
 
 }
@@ -2288,71 +2280,50 @@
 
 static int rt6_info_route(struct rt6_info *rt, void *p_arg)
 {
-	struct rt6_proc_arg *arg = (struct rt6_proc_arg *) p_arg;
+	struct seq_file *m = p_arg;
 
-	if (arg->skip < arg->offset / RT6_INFO_LEN) {
-		arg->skip++;
-		return 0;
-	}
-
-	if (arg->len >= arg->length)
-		return 0;
-
-	arg->len += sprintf(arg->buffer + arg->len,
-			    NIP6_SEQFMT " %02x ",
-			    NIP6(rt->rt6i_dst.addr),
-			    rt->rt6i_dst.plen);
+	seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_dst.addr),
+		   rt->rt6i_dst.plen);
 
 #ifdef CONFIG_IPV6_SUBTREES
-	arg->len += sprintf(arg->buffer + arg->len,
-			    NIP6_SEQFMT " %02x ",
-			    NIP6(rt->rt6i_src.addr),
-			    rt->rt6i_src.plen);
+	seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_src.addr),
+		   rt->rt6i_src.plen);
 #else
-	arg->len += sprintf(arg->buffer + arg->len,
-			    "00000000000000000000000000000000 00 ");
+	seq_puts(m, "00000000000000000000000000000000 00 ");
 #endif
 
 	if (rt->rt6i_nexthop) {
-		arg->len += sprintf(arg->buffer + arg->len,
-				    NIP6_SEQFMT,
-				    NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key)));
+		seq_printf(m, NIP6_SEQFMT,
+			   NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key)));
 	} else {
-		arg->len += sprintf(arg->buffer + arg->len,
-				    "00000000000000000000000000000000");
+		seq_puts(m, "00000000000000000000000000000000");
 	}
-	arg->len += sprintf(arg->buffer + arg->len,
-			    " %08x %08x %08x %08x %8s\n",
-			    rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt),
-			    rt->u.dst.__use, rt->rt6i_flags,
-			    rt->rt6i_dev ? rt->rt6i_dev->name : "");
+	seq_printf(m, " %08x %08x %08x %08x %8s\n",
+		   rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt),
+		   rt->u.dst.__use, rt->rt6i_flags,
+		   rt->rt6i_dev ? rt->rt6i_dev->name : "");
 	return 0;
 }
 
-static int rt6_proc_info(char *buffer, char **start, off_t offset, int length)
+static int ipv6_route_show(struct seq_file *m, void *v)
 {
-	struct rt6_proc_arg arg = {
-		.buffer = buffer,
-		.offset = offset,
-		.length = length,
-	};
-
-	fib6_clean_all(rt6_info_route, 0, &arg);
-
-	*start = buffer;
-	if (offset)
-		*start += offset % RT6_INFO_LEN;
-
-	arg.len -= offset % RT6_INFO_LEN;
-
-	if (arg.len > length)
-		arg.len = length;
-	if (arg.len < 0)
-		arg.len = 0;
-
-	return arg.len;
+	fib6_clean_all(rt6_info_route, 0, m);
+	return 0;
 }
 
+static int ipv6_route_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ipv6_route_show, NULL);
+}
+
+static const struct file_operations ipv6_route_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ipv6_route_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 static int rt6_stats_seq_show(struct seq_file *seq, void *v)
 {
 	seq_printf(seq, "%04x %04x %04x %04x %04x %04x %04x\n",
@@ -2489,22 +2460,14 @@
 
 void __init ip6_route_init(void)
 {
-#ifdef 	CONFIG_PROC_FS
-	struct proc_dir_entry *p;
-#endif
 	ip6_dst_ops.kmem_cachep =
 		kmem_cache_create("ip6_dst_cache", sizeof(struct rt6_info), 0,
 				  SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
 	ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops.kmem_cachep;
 
 	fib6_init();
-#ifdef 	CONFIG_PROC_FS
-	p = proc_net_create(&init_net, "ipv6_route", 0, rt6_proc_info);
-	if (p)
-		p->owner = THIS_MODULE;
-
+	proc_net_fops_create(&init_net, "ipv6_route", 0, &ipv6_route_proc_fops);
 	proc_net_fops_create(&init_net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
 #ifdef CONFIG_XFRM
 	xfrm6_init();
 #endif
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 06be2a1..3aad861 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2107,6 +2107,8 @@
 }
 #endif
 
+DEFINE_PROTO_INUSE(tcpv6)
+
 struct proto tcpv6_prot = {
 	.name			= "TCPv6",
 	.owner			= THIS_MODULE,
@@ -2141,6 +2143,7 @@
 	.compat_setsockopt	= compat_tcp_setsockopt,
 	.compat_getsockopt	= compat_tcp_getsockopt,
 #endif
+	REF_PROTO_INUSE(tcpv6)
 };
 
 static struct inet6_protocol tcpv6_protocol = {
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index caebad6..ee1cc3f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -205,12 +205,11 @@
 	return err;
 
 csum_copy_err:
+	UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite);
 	skb_kill_datagram(sk, skb, flags);
 
-	if (flags & MSG_DONTWAIT) {
-		UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite);
+	if (flags & MSG_DONTWAIT)
 		return -EAGAIN;
-	}
 	goto try_again;
 }
 
@@ -971,6 +970,8 @@
 
 /* ------------------------------------------------------------------------ */
 
+DEFINE_PROTO_INUSE(udpv6)
+
 struct proto udpv6_prot = {
 	.name		   = "UDPv6",
 	.owner		   = THIS_MODULE,
@@ -992,6 +993,7 @@
 	.compat_setsockopt = compat_udpv6_setsockopt,
 	.compat_getsockopt = compat_udpv6_getsockopt,
 #endif
+	REF_PROTO_INUSE(udpv6)
 };
 
 static struct inet_protosw udpv6_protosw = {
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 766566f..5a0379f 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -40,6 +40,8 @@
 	return udplite_get_port(sk, snum, ipv6_rcv_saddr_equal);
 }
 
+DEFINE_PROTO_INUSE(udplitev6)
+
 struct proto udplitev6_prot = {
 	.name		   = "UDPLITEv6",
 	.owner		   = THIS_MODULE,
@@ -62,6 +64,7 @@
 	.compat_setsockopt = compat_udpv6_setsockopt,
 	.compat_getsockopt = compat_udpv6_getsockopt,
 #endif
+	REF_PROTO_INUSE(udplitev6)
 };
 
 static struct inet_protosw udplite6_protosw = {
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index a195a66..c76a952 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -92,11 +92,6 @@
 extern struct ipx_route *ipxrtr_lookup(__be32 net);
 extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
 
-#undef IPX_REFCNT_DEBUG
-#ifdef IPX_REFCNT_DEBUG
-atomic_t ipx_sock_nr;
-#endif
-
 struct ipx_interface *ipx_interfaces_head(void)
 {
 	struct ipx_interface *rc = NULL;
@@ -151,14 +146,7 @@
 {
 	ipx_remove_socket(sk);
 	skb_queue_purge(&sk->sk_receive_queue);
-#ifdef IPX_REFCNT_DEBUG
-	atomic_dec(&ipx_sock_nr);
-	printk(KERN_DEBUG "IPX socket %p released, %d are still alive\n", sk,
-			atomic_read(&ipx_sock_nr));
-	if (atomic_read(&sk->sk_refcnt) != 1)
-		printk(KERN_DEBUG "Destruction sock ipx %p delayed, cnt=%d\n",
-				sk, atomic_read(&sk->sk_refcnt));
-#endif
+	sk_refcnt_debug_dec(sk);
 	sock_put(sk);
 }
 
@@ -1384,11 +1372,8 @@
 	sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto);
 	if (!sk)
 		goto out;
-#ifdef IPX_REFCNT_DEBUG
-	atomic_inc(&ipx_sock_nr);
-	printk(KERN_DEBUG "IPX socket %p created, now we have %d alive\n", sk,
-			atomic_read(&ipx_sock_nr));
-#endif
+
+	sk_refcnt_debug_inc(sk);
 	sock_init_data(sock, sk);
 	sk->sk_no_check = 1;		/* Checksum off by default */
 	sock->ops = &ipx_dgram_ops;
@@ -1409,6 +1394,7 @@
 
 	sock_set_flag(sk, SOCK_DEAD);
 	sock->sk = NULL;
+	sk_refcnt_debug_release(sk);
 	ipx_destroy_socket(sk);
 out:
 	return 0;
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 6fffb38..ce176e6 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -13,6 +13,18 @@
 	This option enables the hardware independent IEEE 802.11
 	networking stack.
 
+config MAC80211_RCSIMPLE
+	bool "'simple' rate control algorithm" if EMBEDDED
+	default y
+	depends on MAC80211
+	help
+	  This option allows you to turn off the 'simple' rate
+	  control algorithm in mac80211. If you do turn it off,
+	  you absolutely need another rate control algorithm.
+
+	  Say Y unless you know you will have another algorithm
+	  available.
+
 config MAC80211_LEDS
 	bool "Enable LED triggers"
 	depends on MAC80211 && LEDS_TRIGGERS
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 219cd9f..1e6237b 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -1,8 +1,9 @@
-obj-$(CONFIG_MAC80211) += mac80211.o rc80211_simple.o
+obj-$(CONFIG_MAC80211) += mac80211.o
 
 mac80211-objs-$(CONFIG_MAC80211_LEDS) += ieee80211_led.o
 mac80211-objs-$(CONFIG_MAC80211_DEBUGFS) += debugfs.o debugfs_sta.o debugfs_netdev.o debugfs_key.o
 mac80211-objs-$(CONFIG_NET_SCHED) += wme.o
+mac80211-objs-$(CONFIG_MAC80211_RCSIMPLE) += rc80211_simple.o
 
 mac80211-objs := \
 	ieee80211.o \
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index f484ca7..e0ee65a 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -1072,7 +1072,8 @@
 	ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
 	ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
 
-	result = ieee80211_init_rate_ctrl_alg(local, NULL);
+	result = ieee80211_init_rate_ctrl_alg(local,
+					      hw->rate_control_algorithm);
 	if (result < 0) {
 		printk(KERN_DEBUG "%s: Failed to initialize rate control "
 		       "algorithm\n", wiphy_name(local->hw.wiphy));
@@ -1233,8 +1234,17 @@
 
 	BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
 
+#ifdef CONFIG_MAC80211_RCSIMPLE
+	ret = ieee80211_rate_control_register(&mac80211_rcsimple);
+	if (ret)
+		return ret;
+#endif
+
 	ret = ieee80211_wme_register();
 	if (ret) {
+#ifdef CONFIG_MAC80211_RCSIMPLE
+		ieee80211_rate_control_unregister(&mac80211_rcsimple);
+#endif
 		printk(KERN_DEBUG "ieee80211_init: failed to "
 		       "initialize WME (err=%d)\n", ret);
 		return ret;
@@ -1248,6 +1258,10 @@
 
 static void __exit ieee80211_exit(void)
 {
+#ifdef CONFIG_MAC80211_RCSIMPLE
+	ieee80211_rate_control_unregister(&mac80211_rcsimple);
+#endif
+
 	ieee80211_wme_unregister();
 	ieee80211_debugfs_netdev_exit();
 }
diff --git a/net/mac80211/ieee80211_common.h b/net/mac80211/ieee80211_common.h
deleted file mode 100644
index c15295d..0000000
--- a/net/mac80211/ieee80211_common.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * IEEE 802.11 driver (80211.o) -- hostapd interface
- * Copyright 2002-2004, Instant802 Networks, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef IEEE80211_COMMON_H
-#define IEEE80211_COMMON_H
-
-#include <linux/types.h>
-
-/*
- * This is common header information with user space. It is used on all
- * frames sent to wlan#ap interface.
- */
-
-#define IEEE80211_FI_VERSION 0x80211001
-
-struct ieee80211_frame_info {
-	__be32 version;
-	__be32 length;
-	__be64 mactime;
-	__be64 hosttime;
-	__be32 phytype;
-	__be32 channel;
-	__be32 datarate;
-	__be32 antenna;
-	__be32 priority;
-	__be32 ssi_type;
-	__be32 ssi_signal;
-	__be32 ssi_noise;
-	__be32 preamble;
-	__be32 encoding;
-
-	/* Note: this structure is otherwise identical to capture format used
-	 * in linux-wlan-ng, but this additional field is used to provide meta
-	 * data about the frame to hostapd. This was the easiest method for
-	 * providing this information, but this might change in the future. */
-	__be32 msg_type;
-} __attribute__ ((packed));
-
-
-enum ieee80211_msg_type {
-	ieee80211_msg_normal = 0,
-	ieee80211_msg_tx_callback_ack = 1,
-	ieee80211_msg_tx_callback_fail = 2,
-	/* hole at 3, was ieee80211_msg_passive_scan but unused */
-	/* hole at 4, was ieee80211_msg_wep_frame_unknown_key but now unused */
-	ieee80211_msg_michael_mic_failure = 5,
-	/* hole at 6, was monitor but never sent to userspace */
-	ieee80211_msg_sta_not_assoc = 7,
-	/* 8 was ieee80211_msg_set_aid_for_sta */
-	/* 9 was ieee80211_msg_key_threshold_notification */
-	/* 11 was ieee80211_msg_radar */
-};
-
-struct ieee80211_msg_key_notification {
-	int tx_rx_count;
-	char ifname[IFNAMSIZ];
-	u8 addr[ETH_ALEN]; /* ff:ff:ff:ff:ff:ff for broadcast keys */
-};
-
-
-enum ieee80211_phytype {
-	ieee80211_phytype_fhss_dot11_97  = 1,
-	ieee80211_phytype_dsss_dot11_97  = 2,
-	ieee80211_phytype_irbaseband     = 3,
-	ieee80211_phytype_dsss_dot11_b   = 4,
-	ieee80211_phytype_pbcc_dot11_b   = 5,
-	ieee80211_phytype_ofdm_dot11_g   = 6,
-	ieee80211_phytype_pbcc_dot11_g   = 7,
-	ieee80211_phytype_ofdm_dot11_a   = 8,
-};
-
-enum ieee80211_ssi_type {
-	ieee80211_ssi_none = 0,
-	ieee80211_ssi_norm = 1, /* normalized, 0-1000 */
-	ieee80211_ssi_dbm = 2,
-	ieee80211_ssi_raw = 3, /* raw SSI */
-};
-
-struct ieee80211_radar_info {
-		int channel;
-		int radar;
-		int radar_type;
-};
-
-#endif /* IEEE80211_COMMON_H */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 4b4ed2a..72e1c93 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -230,6 +230,7 @@
 #define IEEE80211_STA_AUTO_SSID_SEL	BIT(10)
 #define IEEE80211_STA_AUTO_BSSID_SEL	BIT(11)
 #define IEEE80211_STA_AUTO_CHANNEL_SEL	BIT(12)
+#define IEEE80211_STA_PRIVACY_INVOKED	BIT(13)
 struct ieee80211_if_sta {
 	enum {
 		IEEE80211_DISABLED, IEEE80211_AUTHENTICATE,
@@ -241,6 +242,8 @@
 	u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	size_t ssid_len;
+	u8 scan_ssid[IEEE80211_MAX_SSID_LEN];
+	size_t scan_ssid_len;
 	u16 aid;
 	u16 ap_capab, capab;
 	u8 *extra_ie; /* to be added to the end of AssocReq */
@@ -259,7 +262,6 @@
 	unsigned long request;
 	struct sk_buff_head skb_queue;
 
-	int key_management_enabled;
 	unsigned long last_probe;
 
 #define IEEE80211_AUTH_ALG_OPEN BIT(0)
diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c
index 6caa3ec..7027eed 100644
--- a/net/mac80211/ieee80211_ioctl.c
+++ b/net/mac80211/ieee80211_ioctl.c
@@ -917,7 +917,6 @@
 				   struct iw_request_info *info,
 				   struct iw_param *data, char *extra)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	int ret = 0;
 
@@ -927,18 +926,21 @@
 	case IW_AUTH_CIPHER_GROUP:
 	case IW_AUTH_WPA_ENABLED:
 	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		break;
 	case IW_AUTH_KEY_MGMT:
+		break;
+	case IW_AUTH_PRIVACY_INVOKED:
 		if (sdata->type != IEEE80211_IF_TYPE_STA)
 			ret = -EINVAL;
 		else {
+			sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
 			/*
-			 * Key management was set by wpa_supplicant,
-			 * we only need this to associate to a network
-			 * that has privacy enabled regardless of not
-			 * having a key.
+			 * Privacy invoked by wpa_supplicant, store the
+			 * value and allow associating to a protected
+			 * network without having a key up front.
 			 */
-			sdata->u.sta.key_management_enabled = !!data->value;
+			if (data->value)
+				sdata->u.sta.flags |=
+					IEEE80211_STA_PRIVACY_INVOKED;
 		}
 		break;
 	case IW_AUTH_80211_AUTH_ALG:
@@ -948,11 +950,6 @@
 		else
 			ret = -EOPNOTSUPP;
 		break;
-	case IW_AUTH_PRIVACY_INVOKED:
-		if (local->ops->set_privacy_invoked)
-			ret = local->ops->set_privacy_invoked(
-					local_to_hw(local), data->value);
-		break;
 	default:
 		ret = -EOPNOTSUPP;
 		break;
diff --git a/net/mac80211/ieee80211_rate.c b/net/mac80211/ieee80211_rate.c
index 93abb8f..7254bd6 100644
--- a/net/mac80211/ieee80211_rate.c
+++ b/net/mac80211/ieee80211_rate.c
@@ -25,13 +25,25 @@
 {
 	struct rate_control_alg *alg;
 
+	if (!ops->name)
+		return -EINVAL;
+
+	mutex_lock(&rate_ctrl_mutex);
+	list_for_each_entry(alg, &rate_ctrl_algs, list) {
+		if (!strcmp(alg->ops->name, ops->name)) {
+			/* don't register an algorithm twice */
+			WARN_ON(1);
+			return -EALREADY;
+		}
+	}
+
 	alg = kzalloc(sizeof(*alg), GFP_KERNEL);
 	if (alg == NULL) {
+		mutex_unlock(&rate_ctrl_mutex);
 		return -ENOMEM;
 	}
 	alg->ops = ops;
 
-	mutex_lock(&rate_ctrl_mutex);
 	list_add_tail(&alg->list, &rate_ctrl_algs);
 	mutex_unlock(&rate_ctrl_mutex);
 
@@ -61,9 +73,12 @@
 	struct rate_control_alg *alg;
 	struct rate_control_ops *ops = NULL;
 
+	if (!name)
+		return NULL;
+
 	mutex_lock(&rate_ctrl_mutex);
 	list_for_each_entry(alg, &rate_ctrl_algs, list) {
-		if (!name || !strcmp(alg->ops->name, name))
+		if (!strcmp(alg->ops->name, name))
 			if (try_module_get(alg->ops->module)) {
 				ops = alg->ops;
 				break;
@@ -80,9 +95,12 @@
 {
 	struct rate_control_ops *ops;
 
+	if (!name)
+		name = "simple";
+
 	ops = ieee80211_try_rate_control_ops_get(name);
 	if (!ops) {
-		request_module("rc80211_%s", name ? name : "default");
+		request_module("rc80211_%s", name);
 		ops = ieee80211_try_rate_control_ops_get(name);
 	}
 	return ops;
diff --git a/net/mac80211/ieee80211_rate.h b/net/mac80211/ieee80211_rate.h
index 7cd1eba..2368813 100644
--- a/net/mac80211/ieee80211_rate.h
+++ b/net/mac80211/ieee80211_rate.h
@@ -65,6 +65,9 @@
 	struct kref kref;
 };
 
+/* default 'simple' algorithm */
+extern struct rate_control_ops mac80211_rcsimple;
+
 int ieee80211_rate_control_register(struct rate_control_ops *ops);
 void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
 
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index fda0e06..015b3f8 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -704,10 +704,11 @@
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_sta_bss *bss;
-	int res = 0;
+	int bss_privacy;
+	int wep_privacy;
+	int privacy_invoked;
 
-	if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL) ||
-	    ifsta->key_management_enabled)
+	if (!ifsta || (ifsta->flags & IEEE80211_STA_MIXED_CELL))
 		return 0;
 
 	bss = ieee80211_rx_bss_get(dev, ifsta->bssid, local->hw.conf.channel,
@@ -715,13 +716,16 @@
 	if (!bss)
 		return 0;
 
-	if (ieee80211_sta_wep_configured(dev) !=
-	    !!(bss->capability & WLAN_CAPABILITY_PRIVACY))
-		res = 1;
+	bss_privacy = !!(bss->capability & WLAN_CAPABILITY_PRIVACY);
+	wep_privacy = !!ieee80211_sta_wep_configured(dev);
+	privacy_invoked = !!(ifsta->flags & IEEE80211_STA_PRIVACY_INVOKED);
 
 	ieee80211_rx_bss_put(dev, bss);
 
-	return res;
+	if ((bss_privacy == wep_privacy) || (bss_privacy == privacy_invoked))
+		return 0;
+
+	return 1;
 }
 
 
@@ -1998,7 +2002,10 @@
 	if (ifsta->state != IEEE80211_AUTHENTICATE &&
 	    ifsta->state != IEEE80211_ASSOCIATE &&
 	    test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifsta->request)) {
-		ieee80211_sta_start_scan(dev, NULL, 0);
+		if (ifsta->scan_ssid_len)
+			ieee80211_sta_start_scan(dev, ifsta->scan_ssid, ifsta->scan_ssid_len);
+		else
+			ieee80211_sta_start_scan(dev, NULL, 0);
 		return;
 	}
 
@@ -2868,6 +2875,9 @@
 		return -EBUSY;
 	}
 
+	ifsta->scan_ssid_len = ssid_len;
+	if (ssid_len)
+		memcpy(ifsta->scan_ssid, ssid, ssid_len);
 	set_bit(IEEE80211_STA_REQ_SCAN, &ifsta->request);
 	queue_work(local->hw.workqueue, &ifsta->work);
 	return 0;
diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c
index 314b8de..da72737 100644
--- a/net/mac80211/rc80211_simple.c
+++ b/net/mac80211/rc80211_simple.c
@@ -7,7 +7,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/types.h>
@@ -29,8 +28,6 @@
 #define RATE_CONTROL_INTERVAL (HZ / 20)
 #define RATE_CONTROL_MIN_TX 10
 
-MODULE_ALIAS("rc80211_default");
-
 static void rate_control_rate_inc(struct ieee80211_local *local,
 				  struct sta_info *sta)
 {
@@ -394,8 +391,7 @@
 }
 #endif
 
-static struct rate_control_ops rate_control_simple = {
-	.module = THIS_MODULE,
+struct rate_control_ops mac80211_rcsimple = {
 	.name = "simple",
 	.tx_status = rate_control_simple_tx_status,
 	.get_rate = rate_control_simple_get_rate,
@@ -410,22 +406,3 @@
 	.remove_sta_debugfs = rate_control_simple_remove_sta_debugfs,
 #endif
 };
-
-
-static int __init rate_control_simple_init(void)
-{
-	return ieee80211_rate_control_register(&rate_control_simple);
-}
-
-
-static void __exit rate_control_simple_exit(void)
-{
-	ieee80211_rate_control_unregister(&rate_control_simple);
-}
-
-
-subsys_initcall(rate_control_simple_init);
-module_exit(rate_control_simple_exit);
-
-MODULE_DESCRIPTION("Simple rate control algorithm for ieee80211");
-MODULE_LICENSE("GPL");
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index ece7776..428a9fc 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -509,9 +509,11 @@
 		rx->key->tx_rx_count++;
 		/* TODO: add threshold stuff again */
 	} else {
+#ifdef CONFIG_MAC80211_DEBUG
 		if (net_ratelimit())
 			printk(KERN_DEBUG "%s: RX protected frame,"
 			       " but have no key\n", rx->dev->name);
+#endif /* CONFIG_MAC80211_DEBUG */
 		return TXRX_DROP;
 	}
 
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index a84a233..9bf0e1c 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -314,9 +314,11 @@
 
 	if (!(rx->u.rx.status->flag & RX_FLAG_DECRYPTED)) {
 		if (ieee80211_wep_decrypt(rx->local, rx->skb, rx->key)) {
+#ifdef CONFIG_MAC80211_DEBUG
 			if (net_ratelimit())
 				printk(KERN_DEBUG "%s: RX WEP frame, decrypt "
 				       "failed\n", rx->dev->name);
+#endif /* CONFIG_MAC80211_DEBUG */
 			return TXRX_DROP;
 		}
 	} else if (!(rx->u.rx.status->flag & RX_FLAG_IV_STRIPPED)) {
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 6695efb..20cec1c 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -323,9 +323,12 @@
 					  &rx->u.rx.tkip_iv32,
 					  &rx->u.rx.tkip_iv16);
 	if (res != TKIP_DECRYPT_OK || wpa_test) {
-		printk(KERN_DEBUG "%s: TKIP decrypt failed for RX frame from "
-		       "%s (res=%d)\n",
-		       rx->dev->name, print_mac(mac, rx->sta->addr), res);
+#ifdef CONFIG_MAC80211_DEBUG
+		if (net_ratelimit())
+			printk(KERN_DEBUG "%s: TKIP decrypt failed for RX "
+			       "frame from %s (res=%d)\n", rx->dev->name,
+			       print_mac(mac, rx->sta->addr), res);
+#endif /* CONFIG_MAC80211_DEBUG */
 		return TXRX_DROP;
 	}
 
@@ -594,9 +597,12 @@
 			    skb->data + hdrlen + CCMP_HDR_LEN, data_len,
 			    skb->data + skb->len - CCMP_MIC_LEN,
 			    skb->data + hdrlen + CCMP_HDR_LEN)) {
-			printk(KERN_DEBUG "%s: CCMP decrypt failed for RX "
-			       "frame from %s\n", rx->dev->name,
-			       print_mac(mac, rx->sta->addr));
+#ifdef CONFIG_MAC80211_DEBUG
+			if (net_ratelimit())
+				printk(KERN_DEBUG "%s: CCMP decrypt failed "
+				       "for RX frame from %s\n", rx->dev->name,
+				       print_mac(mac, rx->sta->addr));
+#endif /* CONFIG_MAC80211_DEBUG */
 			return TXRX_DROP;
 		}
 	}
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 93c58f9..ad0e36e 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -40,15 +40,15 @@
 # targets
 obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMARK) += xt_CONNMARK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
 obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
 
 # matches
 obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
@@ -59,22 +59,22 @@
 obj-$(CONFIG_NETFILTER_XT_MATCH_DCCP) += xt_dccp.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_DSCP) += xt_dscp.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += xt_esp.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index a1a65a1..cf6ba66 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -109,7 +109,7 @@
 			rcu_read_lock();
 			t = rcu_dereference(nf_ct_ext_types[i]);
 			if (t && t->move)
-				t->move(ct, ct->ext + ct->ext->offset[id]);
+				t->move(ct, ct->ext + ct->ext->offset[i]);
 			rcu_read_unlock();
 		}
 		kfree(ct->ext);
diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c
index aa28315..3dd4b3c 100644
--- a/net/netfilter/nf_sockopt.c
+++ b/net/netfilter/nf_sockopt.c
@@ -23,14 +23,13 @@
 /* Functions to register sockopt ranges (exclusive). */
 int nf_register_sockopt(struct nf_sockopt_ops *reg)
 {
-	struct list_head *i;
+	struct nf_sockopt_ops *ops;
 	int ret = 0;
 
 	if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
 		return -EINTR;
 
-	list_for_each(i, &nf_sockopts) {
-		struct nf_sockopt_ops *ops = (struct nf_sockopt_ops *)i;
+	list_for_each_entry(ops, &nf_sockopts, list) {
 		if (ops->pf == reg->pf
 		    && (overlap(ops->set_optmin, ops->set_optmax,
 				reg->set_optmin, reg->set_optmax)
@@ -61,48 +60,57 @@
 }
 EXPORT_SYMBOL(nf_unregister_sockopt);
 
-/* Call get/setsockopt() */
-static int nf_sockopt(struct sock *sk, int pf, int val,
-		      char __user *opt, int *len, int get)
+static struct nf_sockopt_ops *nf_sockopt_find(struct sock *sk, int pf,
+		int val, int get)
 {
-	struct list_head *i;
 	struct nf_sockopt_ops *ops;
-	int ret;
 
 	if (sk->sk_net != &init_net)
-		return -ENOPROTOOPT;
+		return ERR_PTR(-ENOPROTOOPT);
 
 	if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
-		return -EINTR;
+		return ERR_PTR(-EINTR);
 
-	list_for_each(i, &nf_sockopts) {
-		ops = (struct nf_sockopt_ops *)i;
+	list_for_each_entry(ops, &nf_sockopts, list) {
 		if (ops->pf == pf) {
 			if (!try_module_get(ops->owner))
 				goto out_nosup;
+
 			if (get) {
-				if (val >= ops->get_optmin
-				    && val < ops->get_optmax) {
-					mutex_unlock(&nf_sockopt_mutex);
-					ret = ops->get(sk, val, opt, len);
+				if (val >= ops->get_optmin &&
+						val < ops->get_optmax)
 					goto out;
-				}
 			} else {
-				if (val >= ops->set_optmin
-				    && val < ops->set_optmax) {
-					mutex_unlock(&nf_sockopt_mutex);
-					ret = ops->set(sk, val, opt, *len);
+				if (val >= ops->set_optmin &&
+						val < ops->set_optmax)
 					goto out;
-				}
 			}
 			module_put(ops->owner);
 		}
 	}
- out_nosup:
+out_nosup:
+	ops = ERR_PTR(-ENOPROTOOPT);
+out:
 	mutex_unlock(&nf_sockopt_mutex);
-	return -ENOPROTOOPT;
+	return ops;
+}
 
- out:
+/* Call get/setsockopt() */
+static int nf_sockopt(struct sock *sk, int pf, int val,
+		      char __user *opt, int *len, int get)
+{
+	struct nf_sockopt_ops *ops;
+	int ret;
+
+	ops = nf_sockopt_find(sk, pf, val, get);
+	if (IS_ERR(ops))
+		return PTR_ERR(ops);
+
+	if (get)
+		ret = ops->get(sk, val, opt, len);
+	else
+		ret = ops->set(sk, val, opt, *len);
+
 	module_put(ops->owner);
 	return ret;
 }
@@ -124,56 +132,25 @@
 static int compat_nf_sockopt(struct sock *sk, int pf, int val,
 			     char __user *opt, int *len, int get)
 {
-	struct list_head *i;
 	struct nf_sockopt_ops *ops;
 	int ret;
 
-	if (sk->sk_net != &init_net)
-		return -ENOPROTOOPT;
+	ops = nf_sockopt_find(sk, pf, val, get);
+	if (IS_ERR(ops))
+		return PTR_ERR(ops);
 
-
-	if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
-		return -EINTR;
-
-	list_for_each(i, &nf_sockopts) {
-		ops = (struct nf_sockopt_ops *)i;
-		if (ops->pf == pf) {
-			if (!try_module_get(ops->owner))
-				goto out_nosup;
-
-			if (get) {
-				if (val >= ops->get_optmin
-				    && val < ops->get_optmax) {
-					mutex_unlock(&nf_sockopt_mutex);
-					if (ops->compat_get)
-						ret = ops->compat_get(sk,
-							val, opt, len);
-					else
-						ret = ops->get(sk,
-							val, opt, len);
-					goto out;
-				}
-			} else {
-				if (val >= ops->set_optmin
-				    && val < ops->set_optmax) {
-					mutex_unlock(&nf_sockopt_mutex);
-					if (ops->compat_set)
-						ret = ops->compat_set(sk,
-							val, opt, *len);
-					else
-						ret = ops->set(sk,
-							val, opt, *len);
-					goto out;
-				}
-			}
-			module_put(ops->owner);
-		}
+	if (get) {
+		if (ops->compat_get)
+			ret = ops->compat_get(sk, val, opt, len);
+		else
+			ret = ops->get(sk, val, opt, len);
+	} else {
+		if (ops->compat_set)
+			ret = ops->compat_set(sk, val, opt, *len);
+		else
+			ret = ops->set(sk, val, opt, *len);
 	}
- out_nosup:
-	mutex_unlock(&nf_sockopt_mutex);
-	return -ENOPROTOOPT;
 
- out:
 	module_put(ops->owner);
 	return ret;
 }
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 06cff1d..d7becf0 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -4,7 +4,8 @@
  *   (c) 2000 Gerd Knorr <kraxel@bytesex.org>
  *   Nov 2002: Martin Bene <martin.bene@icomedias.com>:
  *		only ignore TIME_WAIT or gone connections
- *   Copyright © Jan Engelhardt <jengelh@gmx.de>, 2007
+ *   (C) CC Computer Consultants GmbH, 2007
+ *   Contact: <jengelh@computergmbh.de>
  *
  * based on ...
  *
@@ -306,7 +307,7 @@
 
 module_init(xt_connlimit_init);
 module_exit(xt_connlimit_exit);
-MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
 MODULE_DESCRIPTION("netfilter xt_connlimit match module");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("ipt_connlimit");
diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c
index ef48bbd..f9c55dc 100644
--- a/net/netfilter/xt_time.c
+++ b/net/netfilter/xt_time.c
@@ -1,6 +1,7 @@
 /*
  *	xt_time
- *	Copyright © Jan Engelhardt <jengelh@computergmbh.de>, 2007
+ *	Copyright © CC Computer Consultants GmbH, 2007
+ *	Contact: <jengelh@computergmbh.de>
  *
  *	based on ipt_time by Fabrice MARIE <fabrice@netfilter.org>
  *	This is a module which is used for time matching
@@ -169,7 +170,7 @@
 	if (skb->tstamp.tv64 == 0)
 		__net_timestamp((struct sk_buff *)skb);
 
-	stamp = skb->tstamp.tv64;
+	stamp = ktime_to_ns(skb->tstamp);
 	do_div(stamp, NSEC_PER_SEC);
 
 	if (info->flags & XT_TIME_LOCAL_TZ)
diff --git a/net/netfilter/xt_u32.c b/net/netfilter/xt_u32.c
index bec4279..af75b8c 100644
--- a/net/netfilter/xt_u32.c
+++ b/net/netfilter/xt_u32.c
@@ -2,7 +2,8 @@
  *	xt_u32 - kernel module to match u32 packet content
  *
  *	Original author: Don Cohen <don@isis.cs3-inc.com>
- *	© Jan Engelhardt <jengelh@gmx.de>, 2007
+ *	(C) CC Computer Consultants GmbH, 2007
+ *	Contact: <jengelh@computergmbh.de>
  */
 
 #include <linux/module.h>
@@ -129,7 +130,7 @@
 
 module_init(xt_u32_init);
 module_exit(xt_u32_exit);
-MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
 MODULE_DESCRIPTION("netfilter u32 match module");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("ipt_u32");
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 2601712..de3988b 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -752,7 +752,7 @@
  * 1: repeat lookup - reference dropped while waiting for socket memory.
  */
 int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
-		long timeo, struct sock *ssk)
+		      long *timeo, struct sock *ssk)
 {
 	struct netlink_sock *nlk;
 
@@ -761,7 +761,7 @@
 	if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
 	    test_bit(0, &nlk->state)) {
 		DECLARE_WAITQUEUE(wait, current);
-		if (!timeo) {
+		if (!*timeo) {
 			if (!ssk || netlink_is_kernel(ssk))
 				netlink_overrun(sk);
 			sock_put(sk);
@@ -775,7 +775,7 @@
 		if ((atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
 		     test_bit(0, &nlk->state)) &&
 		    !sock_flag(sk, SOCK_DEAD))
-			timeo = schedule_timeout(timeo);
+			*timeo = schedule_timeout(*timeo);
 
 		__set_current_state(TASK_RUNNING);
 		remove_wait_queue(&nlk->wait, &wait);
@@ -783,7 +783,7 @@
 
 		if (signal_pending(current)) {
 			kfree_skb(skb);
-			return sock_intr_errno(timeo);
+			return sock_intr_errno(*timeo);
 		}
 		return 1;
 	}
@@ -877,7 +877,7 @@
 	if (netlink_is_kernel(sk))
 		return netlink_unicast_kernel(sk, skb);
 
-	err = netlink_attachskb(sk, skb, nonblock, timeo, ssk);
+	err = netlink_attachskb(sk, skb, nonblock, &timeo, ssk);
 	if (err == 1)
 		goto retry;
 	if (err)
@@ -1888,7 +1888,7 @@
 #endif
 }
 
-static struct pernet_operations netlink_net_ops = {
+static struct pernet_operations __net_initdata netlink_net_ops = {
 	.init = netlink_net_init,
 	.exit = netlink_net_exit,
 };
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 4cb2dfb..8a7807d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -139,9 +139,6 @@
 static HLIST_HEAD(packet_sklist);
 static DEFINE_RWLOCK(packet_sklist_lock);
 
-static atomic_t packet_socks_nr;
-
-
 /* Private packet socket structures. */
 
 struct packet_mclist
@@ -236,10 +233,7 @@
 		return;
 	}
 
-	atomic_dec(&packet_socks_nr);
-#ifdef PACKET_REFCNT_DEBUG
-	printk(KERN_DEBUG "PACKET socket %p is free, %d are alive\n", sk, atomic_read(&packet_socks_nr));
-#endif
+	sk_refcnt_debug_dec(sk);
 }
 
 
@@ -515,7 +509,7 @@
 	sll->sll_hatype = dev->type;
 	sll->sll_protocol = skb->protocol;
 	sll->sll_pkttype = skb->pkt_type;
-	if (unlikely(po->origdev) && skb->pkt_type == PACKET_HOST)
+	if (unlikely(po->origdev))
 		sll->sll_ifindex = orig_dev->ifindex;
 	else
 		sll->sll_ifindex = dev->ifindex;
@@ -661,7 +655,7 @@
 	sll->sll_hatype = dev->type;
 	sll->sll_protocol = skb->protocol;
 	sll->sll_pkttype = skb->pkt_type;
-	if (unlikely(po->origdev) && skb->pkt_type == PACKET_HOST)
+	if (unlikely(po->origdev))
 		sll->sll_ifindex = orig_dev->ifindex;
 	else
 		sll->sll_ifindex = dev->ifindex;
@@ -849,6 +843,7 @@
 	/* Purge queues */
 
 	skb_queue_purge(&sk->sk_receive_queue);
+	sk_refcnt_debug_release(sk);
 
 	sock_put(sk);
 	return 0;
@@ -886,20 +881,14 @@
 	if (protocol == 0)
 		goto out_unlock;
 
-	if (dev) {
-		if (dev->flags&IFF_UP) {
-			dev_add_pack(&po->prot_hook);
-			sock_hold(sk);
-			po->running = 1;
-		} else {
-			sk->sk_err = ENETDOWN;
-			if (!sock_flag(sk, SOCK_DEAD))
-				sk->sk_error_report(sk);
-		}
-	} else {
+	if (!dev || (dev->flags & IFF_UP)) {
 		dev_add_pack(&po->prot_hook);
 		sock_hold(sk);
 		po->running = 1;
+	} else {
+		sk->sk_err = ENETDOWN;
+		if (!sock_flag(sk, SOCK_DEAD))
+			sk->sk_error_report(sk);
 	}
 
 out_unlock:
@@ -1010,7 +999,7 @@
 	po->num = proto;
 
 	sk->sk_destruct = packet_sock_destruct;
-	atomic_inc(&packet_socks_nr);
+	sk_refcnt_debug_inc(sk);
 
 	/*
 	 *	Attach a protocol block
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 51d151c..73d60a3 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -27,6 +27,10 @@
 #include <linux/mutex.h>
 #include <linux/rfkill.h>
 
+/* Get declaration of rfkill_switch_all() to shut up sparse. */
+#include "rfkill-input.h"
+
+
 MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
 MODULE_VERSION("1.0");
 MODULE_DESCRIPTION("RF switch support");
@@ -276,21 +280,17 @@
 
 static int rfkill_add_switch(struct rfkill *rfkill)
 {
-	int retval;
+	int error;
 
-	retval = mutex_lock_interruptible(&rfkill_mutex);
-	if (retval)
-		return retval;
+	mutex_lock(&rfkill_mutex);
 
-	retval = rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type]);
-	if (retval)
-		goto out;
+	error = rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type]);
+	if (!error)
+		list_add_tail(&rfkill->node, &rfkill_list);
 
-	list_add_tail(&rfkill->node, &rfkill_list);
-
- out:
 	mutex_unlock(&rfkill_mutex);
-	return retval;
+
+	return error;
 }
 
 static void rfkill_remove_switch(struct rfkill *rfkill)
@@ -387,20 +387,23 @@
 
 	if (!rfkill->toggle_radio)
 		return -EINVAL;
+	if (rfkill->type >= RFKILL_TYPE_MAX)
+		return -EINVAL;
+
+	snprintf(dev->bus_id, sizeof(dev->bus_id),
+		 "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
+
+	rfkill_led_trigger_register(rfkill);
 
 	error = rfkill_add_switch(rfkill);
 	if (error)
 		return error;
 
-	snprintf(dev->bus_id, sizeof(dev->bus_id),
-		 "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
-
 	error = device_add(dev);
 	if (error) {
 		rfkill_remove_switch(rfkill);
 		return error;
 	}
-	rfkill_led_trigger_register(rfkill);
 
 	return 0;
 }
@@ -416,9 +419,9 @@
  */
 void rfkill_unregister(struct rfkill *rfkill)
 {
-	rfkill_led_trigger_unregister(rfkill);
 	device_del(&rfkill->dev);
 	rfkill_remove_switch(rfkill);
+	rfkill_led_trigger_unregister(rfkill);
 	put_device(&rfkill->dev);
 }
 EXPORT_SYMBOL(rfkill_unregister);
@@ -448,5 +451,5 @@
 	class_unregister(&rfkill_class);
 }
 
-module_init(rfkill_init);
+subsys_initcall(rfkill_init);
 module_exit(rfkill_exit);
diff --git a/net/rxrpc/ar-local.c b/net/rxrpc/ar-local.c
index fe03f71..f3a2bd7 100644
--- a/net/rxrpc/ar-local.c
+++ b/net/rxrpc/ar-local.c
@@ -114,7 +114,7 @@
 	return 0;
 
 error:
-	local->socket->ops->shutdown(local->socket, 2);
+	kernel_sock_shutdown(local->socket, SHUT_RDWR);
 	local->socket->sk->sk_user_data = NULL;
 	sock_release(local->socket);
 	local->socket = NULL;
@@ -267,7 +267,7 @@
 	/* finish cleaning up the local descriptor */
 	rxrpc_purge_queue(&local->accept_queue);
 	rxrpc_purge_queue(&local->reject_queue);
-	local->socket->ops->shutdown(local->socket, 2);
+	kernel_sock_shutdown(local->socket, SHUT_RDWR);
 	sock_release(local->socket);
 
 	up_read(&rxrpc_local_sem);
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 9e98c6e..c390082 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -91,7 +91,7 @@
 
 static __inline__ unsigned u32_hash_fold(u32 key, struct tc_u32_sel *sel, u8 fshift)
 {
-	unsigned h = (key & sel->hmask)>>fshift;
+	unsigned h = ntohl(key & sel->hmask)>>fshift;
 
 	return h;
 }
@@ -613,17 +613,7 @@
 	memcpy(&n->sel, s, sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key));
 	n->ht_up = ht;
 	n->handle = handle;
-{
-	u8 i = 0;
-	u32 mask = s->hmask;
-	if (mask) {
-		while (!(mask & 1)) {
-			i++;
-			mask>>=1;
-		}
-	}
-	n->fshift = i;
-}
+	n->fshift = s->hmask ? ffs(ntohl(s->hmask)) - 1 : 0;
 
 #ifdef CONFIG_CLS_U32_MARK
 	if (tb[TCA_U32_MARK-1]) {
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index fa1a6f4..e595e65 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -134,7 +134,7 @@
 {
 	struct Qdisc *q = dev->qdisc;
 	struct sk_buff *skb;
-	int ret;
+	int ret = NETDEV_TX_BUSY;
 
 	/* Dequeue packet */
 	if (unlikely((skb = dev_dequeue_skb(dev, q)) == NULL))
@@ -145,7 +145,8 @@
 	spin_unlock(&dev->queue_lock);
 
 	HARD_TX_LOCK(dev, smp_processor_id());
-	ret = dev_hard_start_xmit(skb, dev);
+	if (!netif_subqueue_stopped(dev, skb))
+		ret = dev_hard_start_xmit(skb, dev);
 	HARD_TX_UNLOCK(dev);
 
 	spin_lock(&dev->queue_lock);
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 421281d..c0ed06d 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -252,6 +252,9 @@
 static inline int teql_resolve(struct sk_buff *skb,
 			       struct sk_buff *skb_res, struct net_device *dev)
 {
+	if (dev->qdisc == &noop_qdisc)
+		return -ENODEV;
+
 	if (dev->header_ops == NULL ||
 	    skb->dst == NULL ||
 	    skb->dst->neighbour == NULL)
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 03158e3..013e3d3 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -262,10 +262,14 @@
 	 */
 	asoc->peer.sack_needed = 1;
 
-	/* Assume that the peer recongizes ASCONF until reported otherwise
-	 * via an ERROR chunk.
+	/* Assume that the peer will tell us if he recognizes ASCONF
+	 * as part of INIT exchange.
+	 * The sctp_addip_noauth option is there for backward compatibilty
+	 * and will revert old behavior.
 	 */
-	asoc->peer.asconf_capable = 1;
+	asoc->peer.asconf_capable = 0;
+	if (sctp_addip_noauth)
+		asoc->peer.asconf_capable = 1;
 
 	/* Create an input queue.  */
 	sctp_inq_init(&asoc->base.inqueue);
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index dfffa94..cae95af 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -180,9 +180,7 @@
 /* Delete an address from the bind address list in the SCTP_bind_addr
  * structure.
  */
-int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr,
-			void fastcall (*rcu_call)(struct rcu_head *head,
-					 void (*func)(struct rcu_head *head)))
+int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr)
 {
 	struct sctp_sockaddr_entry *addr, *temp;
 
@@ -198,15 +196,10 @@
 		}
 	}
 
-	/* Call the rcu callback provided in the args.  This function is
-	 * called by both BH packet processing and user side socket option
-	 * processing, but it works on different lists in those 2 contexts.
-	 * Each context provides it's own callback, whether call_rcu_bh()
-	 * or call_rcu(), to make sure that we wait for an appropriate time.
-	 */
 	if (addr && !addr->valid) {
-		rcu_call(&addr->rcu, sctp_local_addr_free);
+		call_rcu(&addr->rcu, sctp_local_addr_free);
 		SCTP_DBG_OBJCNT_DEC(addr);
+		return 0;
 	}
 
 	return -EINVAL;
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index 2d2d81e..de6f505 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -328,24 +328,35 @@
 	const union sctp_addr *paddr,
 	struct sctp_transport **transport)
 {
+	struct sctp_association *asoc = NULL;
+	struct sctp_transport *t = NULL;
+	struct sctp_hashbucket *head;
+	struct sctp_ep_common *epb;
+	struct hlist_node *node;
+	int hash;
 	int rport;
-	struct sctp_association *asoc;
-	struct list_head *pos;
-
-	rport = ntohs(paddr->v4.sin_port);
-
-	list_for_each(pos, &ep->asocs) {
-		asoc = list_entry(pos, struct sctp_association, asocs);
-		if (rport == asoc->peer.port) {
-			*transport = sctp_assoc_lookup_paddr(asoc, paddr);
-
-			if (*transport)
-				return asoc;
-		}
-	}
 
 	*transport = NULL;
-	return NULL;
+	rport = ntohs(paddr->v4.sin_port);
+
+	hash = sctp_assoc_hashfn(ep->base.bind_addr.port, rport);
+	head = &sctp_assoc_hashtable[hash];
+	read_lock(&head->lock);
+	sctp_for_each_hentry(epb, node, &head->chain) {
+		asoc = sctp_assoc(epb);
+		if (asoc->ep != ep || rport != asoc->peer.port)
+			goto next;
+
+		t = sctp_assoc_lookup_paddr(asoc, paddr);
+		if (t) {
+			*transport = t;
+			break;
+		}
+next:
+		asoc = NULL;
+	}
+	read_unlock(&head->lock);
+	return asoc;
 }
 
 /* Lookup association on an endpoint based on a peer address.  BH-safe.  */
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 86503e7..91ae463 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -656,7 +656,6 @@
 /* Insert endpoint into the hash table.  */
 static void __sctp_hash_endpoint(struct sctp_endpoint *ep)
 {
-	struct sctp_ep_common **epp;
 	struct sctp_ep_common *epb;
 	struct sctp_hashbucket *head;
 
@@ -666,12 +665,7 @@
 	head = &sctp_ep_hashtable[epb->hashent];
 
 	sctp_write_lock(&head->lock);
-	epp = &head->chain;
-	epb->next = *epp;
-	if (epb->next)
-		(*epp)->pprev = &epb->next;
-	*epp = epb;
-	epb->pprev = epp;
+	hlist_add_head(&epb->node, &head->chain);
 	sctp_write_unlock(&head->lock);
 }
 
@@ -691,19 +685,15 @@
 
 	epb = &ep->base;
 
+	if (hlist_unhashed(&epb->node))
+		return;
+
 	epb->hashent = sctp_ep_hashfn(epb->bind_addr.port);
 
 	head = &sctp_ep_hashtable[epb->hashent];
 
 	sctp_write_lock(&head->lock);
-
-	if (epb->pprev) {
-		if (epb->next)
-			epb->next->pprev = epb->pprev;
-		*epb->pprev = epb->next;
-		epb->pprev = NULL;
-	}
-
+	__hlist_del(&epb->node);
 	sctp_write_unlock(&head->lock);
 }
 
@@ -721,12 +711,13 @@
 	struct sctp_hashbucket *head;
 	struct sctp_ep_common *epb;
 	struct sctp_endpoint *ep;
+	struct hlist_node *node;
 	int hash;
 
 	hash = sctp_ep_hashfn(ntohs(laddr->v4.sin_port));
 	head = &sctp_ep_hashtable[hash];
 	read_lock(&head->lock);
-	for (epb = head->chain; epb; epb = epb->next) {
+	sctp_for_each_hentry(epb, node, &head->chain) {
 		ep = sctp_ep(epb);
 		if (sctp_endpoint_is_match(ep, laddr))
 			goto hit;
@@ -744,7 +735,6 @@
 /* Insert association into the hash table.  */
 static void __sctp_hash_established(struct sctp_association *asoc)
 {
-	struct sctp_ep_common **epp;
 	struct sctp_ep_common *epb;
 	struct sctp_hashbucket *head;
 
@@ -756,12 +746,7 @@
 	head = &sctp_assoc_hashtable[epb->hashent];
 
 	sctp_write_lock(&head->lock);
-	epp = &head->chain;
-	epb->next = *epp;
-	if (epb->next)
-		(*epp)->pprev = &epb->next;
-	*epp = epb;
-	epb->pprev = epp;
+	hlist_add_head(&epb->node, &head->chain);
 	sctp_write_unlock(&head->lock);
 }
 
@@ -790,14 +775,7 @@
 	head = &sctp_assoc_hashtable[epb->hashent];
 
 	sctp_write_lock(&head->lock);
-
-	if (epb->pprev) {
-		if (epb->next)
-			epb->next->pprev = epb->pprev;
-		*epb->pprev = epb->next;
-		epb->pprev = NULL;
-	}
-
+	__hlist_del(&epb->node);
 	sctp_write_unlock(&head->lock);
 }
 
@@ -822,6 +800,7 @@
 	struct sctp_ep_common *epb;
 	struct sctp_association *asoc;
 	struct sctp_transport *transport;
+	struct hlist_node *node;
 	int hash;
 
 	/* Optimize here for direct hit, only listening connections can
@@ -830,7 +809,7 @@
 	hash = sctp_assoc_hashfn(ntohs(local->v4.sin_port), ntohs(peer->v4.sin_port));
 	head = &sctp_assoc_hashtable[hash];
 	read_lock(&head->lock);
-	for (epb = head->chain; epb; epb = epb->next) {
+	sctp_for_each_hentry(epb, node, &head->chain) {
 		asoc = sctp_assoc(epb);
 		transport = sctp_assoc_is_match(asoc, local, peer);
 		if (transport)
diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c
index f10fe7f..cf4b7eb 100644
--- a/net/sctp/inqueue.c
+++ b/net/sctp/inqueue.c
@@ -90,6 +90,10 @@
 void sctp_inq_push(struct sctp_inq *q, struct sctp_chunk *chunk)
 {
 	/* Directly call the packet handling routine. */
+	if (chunk->rcvr->dead) {
+		sctp_chunk_free(chunk);
+		return;
+	}
 
 	/* We are now calling this either from the soft interrupt
 	 * or from the backlog processing.
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 28f4fe7..fa76f23 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -382,7 +382,7 @@
 /* Mark all the eligible packets on a transport for retransmission.  */
 void sctp_retransmit_mark(struct sctp_outq *q,
 			  struct sctp_transport *transport,
-			  __u8 fast_retransmit)
+			  __u8 reason)
 {
 	struct list_head *lchunk, *ltemp;
 	struct sctp_chunk *chunk;
@@ -412,20 +412,20 @@
 			continue;
 		}
 
-		/* If we are doing retransmission due to a fast retransmit,
-		 * only the chunk's that are marked for fast retransmit
-		 * should be added to the retransmit queue.  If we are doing
-		 * retransmission due to a timeout or pmtu discovery, only the
-		 * chunks that are not yet acked should be added to the
-		 * retransmit queue.
+		/* If we are doing  retransmission due to a timeout or pmtu
+		 * discovery, only the  chunks that are not yet acked should
+		 * be added to the retransmit queue.
 		 */
-		if ((fast_retransmit && (chunk->fast_retransmit > 0)) ||
-		   (!fast_retransmit && !chunk->tsn_gap_acked)) {
+		if ((reason == SCTP_RTXR_FAST_RTX  &&
+			    (chunk->fast_retransmit > 0)) ||
+		    (reason != SCTP_RTXR_FAST_RTX  && !chunk->tsn_gap_acked)) {
 			/* If this chunk was sent less then 1 rto ago, do not
 			 * retransmit this chunk, but give the peer time
-			 * to acknowlege it.
+			 * to acknowlege it.  Do this only when
+			 * retransmitting due to T3 timeout.
 			 */
-			if ((jiffies - chunk->sent_at) < transport->rto)
+			if (reason == SCTP_RTXR_T3_RTX &&
+			    (jiffies - chunk->sent_at) < transport->last_rto)
 				continue;
 
 			/* RFC 2960 6.2.1 Processing a Received SACK
@@ -467,10 +467,10 @@
 		}
 	}
 
-	SCTP_DEBUG_PRINTK("%s: transport: %p, fast_retransmit: %d, "
+	SCTP_DEBUG_PRINTK("%s: transport: %p, reason: %d, "
 			  "cwnd: %d, ssthresh: %d, flight_size: %d, "
 			  "pba: %d\n", __FUNCTION__,
-			  transport, fast_retransmit,
+			  transport, reason,
 			  transport->cwnd, transport->ssthresh,
 			  transport->flight_size,
 			  transport->partial_bytes_acked);
@@ -484,7 +484,6 @@
 		     sctp_retransmit_reason_t reason)
 {
 	int error = 0;
-	__u8 fast_retransmit = 0;
 
 	switch(reason) {
 	case SCTP_RTXR_T3_RTX:
@@ -499,16 +498,18 @@
 	case SCTP_RTXR_FAST_RTX:
 		SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS);
 		sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX);
-		fast_retransmit = 1;
 		break;
 	case SCTP_RTXR_PMTUD:
 		SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS);
 		break;
+	case SCTP_RTXR_T1_RTX:
+		SCTP_INC_STATS(SCTP_MIB_T1_RETRANSMITS);
+		break;
 	default:
 		BUG();
 	}
 
-	sctp_retransmit_mark(q, transport, fast_retransmit);
+	sctp_retransmit_mark(q, transport, reason);
 
 	/* PR-SCTP A5) Any time the T3-rtx timer expires, on any destination,
 	 * the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by
@@ -641,7 +642,8 @@
 
 		/* If we are here due to a retransmit timeout or a fast
 		 * retransmit and if there are any chunks left in the retransmit
-		 * queue that could not fit in the PMTU sized packet, they need			 * to be marked as ineligible for a subsequent fast retransmit.
+		 * queue that could not fit in the PMTU sized packet, they need
+		 * to be marked as ineligible for a subsequent fast retransmit.
 		 */
 		if (rtx_timeout && !lchunk) {
 			list_for_each(lchunk1, lqueue) {
@@ -660,10 +662,9 @@
 int sctp_outq_uncork(struct sctp_outq *q)
 {
 	int error = 0;
-	if (q->cork) {
+	if (q->cork)
 		q->cork = 0;
-		error = sctp_outq_flush(q, 0);
-	}
+	error = sctp_outq_flush(q, 0);
 	return error;
 }
 
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index e4cd841..2499732 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -225,6 +225,7 @@
 	struct sctp_ep_common *epb;
 	struct sctp_endpoint *ep;
 	struct sock *sk;
+	struct hlist_node *node;
 	int    hash = *(loff_t *)v;
 
 	if (hash >= sctp_ep_hashsize)
@@ -233,7 +234,7 @@
 	head = &sctp_ep_hashtable[hash];
 	sctp_local_bh_disable();
 	read_lock(&head->lock);
-	for (epb = head->chain; epb; epb = epb->next) {
+	sctp_for_each_hentry(epb, node, &head->chain) {
 		ep = sctp_ep(epb);
 		sk = epb->sk;
 		seq_printf(seq, "%8p %8p %-3d %-3d %-4d %-5d %5d %5lu ", ep, sk,
@@ -328,6 +329,7 @@
 	struct sctp_ep_common *epb;
 	struct sctp_association *assoc;
 	struct sock *sk;
+	struct hlist_node *node;
 	int    hash = *(loff_t *)v;
 
 	if (hash >= sctp_assoc_hashsize)
@@ -336,7 +338,7 @@
 	head = &sctp_assoc_hashtable[hash];
 	sctp_local_bh_disable();
 	read_lock(&head->lock);
-	for (epb = head->chain; epb; epb = epb->next) {
+	sctp_for_each_hentry(epb, node, &head->chain) {
 		assoc = sctp_assoc(epb);
 		sk = epb->sk;
 		seq_printf(seq,
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 40c1a47..d50f610 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1137,7 +1137,7 @@
 	}
 	for (i = 0; i < sctp_assoc_hashsize; i++) {
 		rwlock_init(&sctp_assoc_hashtable[i].lock);
-		sctp_assoc_hashtable[i].chain = NULL;
+		INIT_HLIST_HEAD(&sctp_assoc_hashtable[i].chain);
 	}
 
 	/* Allocate and initialize the endpoint hash table.  */
@@ -1151,7 +1151,7 @@
 	}
 	for (i = 0; i < sctp_ep_hashsize; i++) {
 		rwlock_init(&sctp_ep_hashtable[i].lock);
-		sctp_ep_hashtable[i].chain = NULL;
+		INIT_HLIST_HEAD(&sctp_ep_hashtable[i].chain);
 	}
 
 	/* Allocate and initialize the SCTP port hash table.  */
@@ -1170,7 +1170,7 @@
 	}
 	for (i = 0; i < sctp_port_hashsize; i++) {
 		spin_lock_init(&sctp_port_hashtable[i].lock);
-		sctp_port_hashtable[i].chain = NULL;
+		INIT_HLIST_HEAD(&sctp_port_hashtable[i].chain);
 	}
 
 	printk(KERN_INFO "SCTP: Hash tables configured "
@@ -1179,6 +1179,7 @@
 
 	/* Disable ADDIP by default. */
 	sctp_addip_enable = 0;
+	sctp_addip_noauth = 0;
 
 	/* Enable PR-SCTP by default. */
 	sctp_prsctp_enable = 1;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index c377e4e..5a9783c 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1788,9 +1788,14 @@
 						sizeof(sctp_paramhdr_t);
 
 
+	/* This is a fatal error.  Any accumulated non-fatal errors are
+	 * not reported.
+	 */
+	if (*errp)
+		sctp_chunk_free(*errp);
+
 	/* Create an error chunk and fill it in with our payload. */
-	if (!*errp)
-		*errp = sctp_make_op_error_space(asoc, chunk, payload_len);
+	*errp = sctp_make_op_error_space(asoc, chunk, payload_len);
 
 	if (*errp) {
 		sctp_init_cause(*errp, SCTP_ERROR_PROTO_VIOLATION,
@@ -1813,9 +1818,15 @@
 {
 	__u16 len = ntohs(param.p->length);
 
-	/* Make an ERROR chunk. */
-	if (!*errp)
-		*errp = sctp_make_op_error_space(asoc, chunk, len);
+	/* Processing of the HOST_NAME parameter will generate an
+	 * ABORT.  If we've accumulated any non-fatal errors, they
+	 * would be unrecognized parameters and we should not include
+	 * them in the ABORT.
+	 */
+	if (*errp)
+		sctp_chunk_free(*errp);
+
+	*errp = sctp_make_op_error_space(asoc, chunk, len);
 
 	if (*errp) {
 		sctp_init_cause(*errp, SCTP_ERROR_DNS_FAILED, len);
@@ -1847,7 +1858,7 @@
 			    break;
 		    case SCTP_CID_ASCONF:
 		    case SCTP_CID_ASCONF_ACK:
-			    asoc->peer.addip_capable = 1;
+			    asoc->peer.asconf_capable = 1;
 			    break;
 		    default:
 			    break;
@@ -1862,56 +1873,40 @@
  * taken if the processing endpoint does not recognize the
  * Parameter Type.
  *
- * 00 - Stop processing this SCTP chunk and discard it,
- *	do not process any further chunks within it.
+ * 00 - Stop processing this parameter; do not process any further
+ * 	parameters within this chunk
  *
- * 01 - Stop processing this SCTP chunk and discard it,
- *	do not process any further chunks within it, and report
- *	the unrecognized parameter in an 'Unrecognized
- *	Parameter Type' (in either an ERROR or in the INIT ACK).
+ * 01 - Stop processing this parameter, do not process any further
+ *	parameters within this chunk, and report the unrecognized
+ *	parameter in an 'Unrecognized Parameter' ERROR chunk.
  *
  * 10 - Skip this parameter and continue processing.
  *
  * 11 - Skip this parameter and continue processing but
  *	report the unrecognized parameter in an
- *	'Unrecognized Parameter Type' (in either an ERROR or in
- *	the INIT ACK).
+ *	'Unrecognized Parameter' ERROR chunk.
  *
  * Return value:
- * 	0 - discard the chunk
- * 	1 - continue with the chunk
+ * 	SCTP_IERROR_NO_ERROR - continue with the chunk
+ * 	SCTP_IERROR_ERROR    - stop and report an error.
+ * 	SCTP_IERROR_NOMEME   - out of memory.
  */
-static int sctp_process_unk_param(const struct sctp_association *asoc,
-				  union sctp_params param,
-				  struct sctp_chunk *chunk,
-				  struct sctp_chunk **errp)
+static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc,
+					    union sctp_params param,
+					    struct sctp_chunk *chunk,
+					    struct sctp_chunk **errp)
 {
-	int retval = 1;
+	int retval = SCTP_IERROR_NO_ERROR;
 
 	switch (param.p->type & SCTP_PARAM_ACTION_MASK) {
 	case SCTP_PARAM_ACTION_DISCARD:
-		retval =  0;
-		break;
-	case SCTP_PARAM_ACTION_DISCARD_ERR:
-		retval =  0;
-		/* Make an ERROR chunk, preparing enough room for
-		 * returning multiple unknown parameters.
-		 */
-		if (NULL == *errp)
-			*errp = sctp_make_op_error_space(asoc, chunk,
-					ntohs(chunk->chunk_hdr->length));
-
-		if (*errp) {
-			sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
-					WORD_ROUND(ntohs(param.p->length)));
-			sctp_addto_chunk(*errp,
-					WORD_ROUND(ntohs(param.p->length)),
-					param.v);
-		}
-
+		retval =  SCTP_IERROR_ERROR;
 		break;
 	case SCTP_PARAM_ACTION_SKIP:
 		break;
+	case SCTP_PARAM_ACTION_DISCARD_ERR:
+		retval =  SCTP_IERROR_ERROR;
+		/* Fall through */
 	case SCTP_PARAM_ACTION_SKIP_ERR:
 		/* Make an ERROR chunk, preparing enough room for
 		 * returning multiple unknown parameters.
@@ -1932,9 +1927,8 @@
 			 * to the peer and the association won't be
 			 * established.
 			 */
-			retval = 0;
+			retval = SCTP_IERROR_NOMEM;
 		}
-
 		break;
 	default:
 		break;
@@ -1943,18 +1937,20 @@
 	return retval;
 }
 
-/* Find unrecognized parameters in the chunk.
+/* Verify variable length parameters
  * Return values:
- * 	0 - discard the chunk
- * 	1 - continue with the chunk
+ * 	SCTP_IERROR_ABORT - trigger an ABORT
+ * 	SCTP_IERROR_NOMEM - out of memory (abort)
+ *	SCTP_IERROR_ERROR - stop processing, trigger an ERROR
+ * 	SCTP_IERROR_NO_ERROR - continue with the chunk
  */
-static int sctp_verify_param(const struct sctp_association *asoc,
-			     union sctp_params param,
-			     sctp_cid_t cid,
-			     struct sctp_chunk *chunk,
-			     struct sctp_chunk **err_chunk)
+static sctp_ierror_t sctp_verify_param(const struct sctp_association *asoc,
+					union sctp_params param,
+					sctp_cid_t cid,
+					struct sctp_chunk *chunk,
+					struct sctp_chunk **err_chunk)
 {
-	int retval = 1;
+	int retval = SCTP_IERROR_NO_ERROR;
 
 	/* FIXME - This routine is not looking at each parameter per the
 	 * chunk type, i.e., unrecognized parameters should be further
@@ -1976,7 +1972,9 @@
 
 	case SCTP_PARAM_HOST_NAME_ADDRESS:
 		/* Tell the peer, we won't support this param.  */
-		return sctp_process_hn_param(asoc, param, chunk, err_chunk);
+		sctp_process_hn_param(asoc, param, chunk, err_chunk);
+		retval = SCTP_IERROR_ABORT;
+		break;
 
 	case SCTP_PARAM_FWD_TSN_SUPPORT:
 		if (sctp_prsctp_enable)
@@ -1993,9 +1991,11 @@
 		 * cause 'Protocol Violation'.
 		 */
 		if (SCTP_AUTH_RANDOM_LENGTH !=
-			ntohs(param.p->length) - sizeof(sctp_paramhdr_t))
-			return sctp_process_inv_paramlength(asoc, param.p,
+			ntohs(param.p->length) - sizeof(sctp_paramhdr_t)) {
+			sctp_process_inv_paramlength(asoc, param.p,
 							chunk, err_chunk);
+			retval = SCTP_IERROR_ABORT;
+		}
 		break;
 
 	case SCTP_PARAM_CHUNKS:
@@ -2007,9 +2007,11 @@
 		 *  INIT-ACK chunk if the sender wants to receive authenticated
 		 *  chunks.  Its maximum length is 260 bytes.
 		 */
-		if (260 < ntohs(param.p->length))
-			return sctp_process_inv_paramlength(asoc, param.p,
-							chunk, err_chunk);
+		if (260 < ntohs(param.p->length)) {
+			sctp_process_inv_paramlength(asoc, param.p,
+						     chunk, err_chunk);
+			retval = SCTP_IERROR_ABORT;
+		}
 		break;
 
 	case SCTP_PARAM_HMAC_ALGO:
@@ -2020,8 +2022,7 @@
 	default:
 		SCTP_DEBUG_PRINTK("Unrecognized param: %d for chunk %d.\n",
 				ntohs(param.p->type), cid);
-		return sctp_process_unk_param(asoc, param, chunk, err_chunk);
-
+		retval = sctp_process_unk_param(asoc, param, chunk, err_chunk);
 		break;
 	}
 	return retval;
@@ -2036,6 +2037,7 @@
 {
 	union sctp_params param;
 	int has_cookie = 0;
+	int result;
 
 	/* Verify stream values are non-zero. */
 	if ((0 == peer_init->init_hdr.num_outbound_streams) ||
@@ -2043,8 +2045,7 @@
 	    (0 == peer_init->init_hdr.init_tag) ||
 	    (SCTP_DEFAULT_MINWINDOW > ntohl(peer_init->init_hdr.a_rwnd))) {
 
-		sctp_process_inv_mandatory(asoc, chunk, errp);
-		return 0;
+		return sctp_process_inv_mandatory(asoc, chunk, errp);
 	}
 
 	/* Check for missing mandatory parameters.  */
@@ -2062,29 +2063,29 @@
 	 * VIOLATION error.  We build the ERROR chunk here and let the normal
 	 * error handling code build and send the packet.
 	 */
-	if (param.v != (void*)chunk->chunk_end) {
-		sctp_process_inv_paramlength(asoc, param.p, chunk, errp);
-		return 0;
-	}
+	if (param.v != (void*)chunk->chunk_end)
+		return sctp_process_inv_paramlength(asoc, param.p, chunk, errp);
 
 	/* The only missing mandatory param possible today is
 	 * the state cookie for an INIT-ACK chunk.
 	 */
-	if ((SCTP_CID_INIT_ACK == cid) && !has_cookie) {
-		sctp_process_missing_param(asoc, SCTP_PARAM_STATE_COOKIE,
-					   chunk, errp);
-		return 0;
-	}
+	if ((SCTP_CID_INIT_ACK == cid) && !has_cookie)
+		return sctp_process_missing_param(asoc, SCTP_PARAM_STATE_COOKIE,
+						  chunk, errp);
 
-	/* Find unrecognized parameters. */
-
+	/* Verify all the variable length parameters */
 	sctp_walk_params(param, peer_init, init_hdr.params) {
 
-		if (!sctp_verify_param(asoc, param, cid, chunk, errp)) {
-			if (SCTP_PARAM_HOST_NAME_ADDRESS == param.p->type)
+		result = sctp_verify_param(asoc, param, cid, chunk, errp);
+		switch (result) {
+		    case SCTP_IERROR_ABORT:
+		    case SCTP_IERROR_NOMEM:
 				return 0;
-			else
+		    case SCTP_IERROR_ERROR:
 				return 1;
+		    case SCTP_IERROR_NO_ERROR:
+		    default:
+				break;
 		}
 
 	} /* for (loop through all parameters) */
@@ -2137,11 +2138,14 @@
 
 	/* If the peer claims support for ADD-IP without support
 	 * for AUTH, disable support for ADD-IP.
+	 * Do this only if backward compatible mode is turned off.
 	 */
-	if (asoc->peer.addip_capable && !asoc->peer.auth_capable) {
+	if (!sctp_addip_noauth &&
+	     (asoc->peer.asconf_capable && !asoc->peer.auth_capable)) {
 		asoc->peer.addip_disabled_mask |= (SCTP_PARAM_ADD_IP |
 						  SCTP_PARAM_DEL_IP |
 						  SCTP_PARAM_SET_PRIMARY);
+		asoc->peer.asconf_capable = 0;
 	}
 
 	/* Walk list of transports, removing transports in the UNKNOWN state. */
@@ -2848,10 +2852,11 @@
 
 	__be16	err_code;
 	int	length = 0;
-	int	chunk_len = asconf->skb->len;
+	int	chunk_len;
 	__u32	serial;
 	int	all_param_pass = 1;
 
+	chunk_len = ntohs(asconf->chunk_hdr->length) - sizeof(sctp_chunkhdr_t);
 	hdr = (sctp_addiphdr_t *)asconf->skb->data;
 	serial = ntohl(hdr->serial);
 
@@ -2952,13 +2957,17 @@
 		/* This is always done in BH context with a socket lock
 		 * held, so the list can not change.
 		 */
+		local_bh_disable();
 		list_for_each_entry(saddr, &bp->address_list, list) {
 			if (sctp_cmp_addr_exact(&saddr->a, &addr))
 				saddr->use_as_src = 1;
 		}
+		local_bh_enable();
 		break;
 	case SCTP_PARAM_DEL_IP:
-		retval = sctp_del_bind_addr(bp, &addr, call_rcu_bh);
+		local_bh_disable();
+		retval = sctp_del_bind_addr(bp, &addr);
+		local_bh_enable();
 		list_for_each(pos, &asoc->peer.transport_addr_list) {
 			transport = list_entry(pos, struct sctp_transport,
 						 transports);
@@ -2990,7 +2999,7 @@
 	sctp_addip_param_t	*asconf_ack_param;
 	sctp_errhdr_t		*err_param;
 	int			length;
-	int			asconf_ack_len = asconf_ack->skb->len;
+	int			asconf_ack_len;
 	__be16			err_code;
 
 	if (no_err)
@@ -2998,6 +3007,9 @@
 	else
 		err_code = SCTP_ERROR_REQ_REFUSED;
 
+	asconf_ack_len = ntohs(asconf_ack->chunk_hdr->length) -
+			     sizeof(sctp_chunkhdr_t);
+
 	/* Skip the addiphdr from the asconf_ack chunk and store a pointer to
 	 * the first asconf_ack parameter.
 	 */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index bbdc938..78d1a8a 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -453,6 +453,7 @@
 	 * maximum value discussed in rule C7 above (RTO.max) may be
 	 * used to provide an upper bound to this doubling operation.
 	 */
+	transport->last_rto = transport->rto;
 	transport->rto = min((transport->rto * 2), transport->asoc->rto_max);
 }
 
@@ -1267,6 +1268,12 @@
 			sctp_ootb_pkt_free(packet);
 			break;
 
+		case SCTP_CMD_T1_RETRAN:
+			/* Mark a transport for retransmission.  */
+			sctp_retransmit(&asoc->outqueue, cmd->obj.transport,
+					SCTP_RTXR_T1_RTX);
+			break;
+
 		case SCTP_CMD_RETRAN:
 			/* Mark a transport for retransmission.  */
 			sctp_retransmit(&asoc->outqueue, cmd->obj.transport,
@@ -1393,7 +1400,8 @@
 			list_for_each(pos, &asoc->peer.transport_addr_list) {
 				t = list_entry(pos, struct sctp_transport,
 					       transports);
-				sctp_retransmit_mark(&asoc->outqueue, t, 0);
+				sctp_retransmit_mark(&asoc->outqueue, t,
+					    SCTP_RTXR_T1_RTX);
 			}
 
 			sctp_add_cmd_sf(commands,
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index f01b408..5ebbe80 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -2305,7 +2305,7 @@
 	/* If we've sent any data bundled with COOKIE-ECHO we will need to
 	 * resend
 	 */
-	sctp_add_cmd_sf(commands, SCTP_CMD_RETRAN,
+	sctp_add_cmd_sf(commands, SCTP_CMD_T1_RETRAN,
 			SCTP_TRANSPORT(asoc->peer.primary_path));
 
 	/* Cast away the const modifier, as we want to just
@@ -4064,11 +4064,6 @@
 	struct sctp_chunk *chunk =  arg;
 	struct sctp_chunk *abort = NULL;
 
-	/* Make the abort chunk. */
-	abort = sctp_make_abort_violation(asoc, chunk, payload, paylen);
-	if (!abort)
-		goto nomem;
-
 	/* SCTP-AUTH, Section 6.3:
 	 *    It should be noted that if the receiver wants to tear
 	 *    down an association in an authenticated way only, the
@@ -4083,6 +4078,11 @@
 	if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
 		goto discard;
 
+	/* Make the abort chunk. */
+	abort = sctp_make_abort_violation(asoc, chunk, payload, paylen);
+	if (!abort)
+		goto nomem;
+
 	if (asoc) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
 		SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index bd6f42a..ff8bc95 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -660,7 +660,7 @@
 		 * socket routing and failover schemes. Refer to comments in
 		 * sctp_do_bind(). -daisy
 		 */
-		retval = sctp_del_bind_addr(bp, sa_addr, call_rcu);
+		retval = sctp_del_bind_addr(bp, sa_addr);
 
 		addr_buf += af->sockaddr_len;
 err_bindx_rem:
@@ -5307,6 +5307,7 @@
 {
 	struct sctp_bind_hashbucket *head; /* hash list */
 	struct sctp_bind_bucket *pp; /* hash list port iterator */
+	struct hlist_node *node;
 	unsigned short snum;
 	int ret;
 
@@ -5331,7 +5332,7 @@
 			index = sctp_phashfn(rover);
 			head = &sctp_port_hashtable[index];
 			sctp_spin_lock(&head->lock);
-			for (pp = head->chain; pp; pp = pp->next)
+			sctp_for_each_hentry(pp, node, &head->chain)
 				if (pp->port == rover)
 					goto next;
 			break;
@@ -5358,7 +5359,7 @@
 		 */
 		head = &sctp_port_hashtable[sctp_phashfn(snum)];
 		sctp_spin_lock(&head->lock);
-		for (pp = head->chain; pp; pp = pp->next) {
+		sctp_for_each_hentry(pp, node, &head->chain) {
 			if (pp->port == snum)
 				goto pp_found;
 		}
@@ -5702,10 +5703,7 @@
 		pp->port = snum;
 		pp->fastreuse = 0;
 		INIT_HLIST_HEAD(&pp->owner);
-		if ((pp->next = head->chain) != NULL)
-			pp->next->pprev = &pp->next;
-		head->chain = pp;
-		pp->pprev = &head->chain;
+		hlist_add_head(&pp->node, &head->chain);
 	}
 	return pp;
 }
@@ -5714,9 +5712,7 @@
 static void sctp_bucket_destroy(struct sctp_bind_bucket *pp)
 {
 	if (pp && hlist_empty(&pp->owner)) {
-		if (pp->next)
-			pp->next->pprev = pp->pprev;
-		*(pp->pprev) = pp->next;
+		__hlist_del(&pp->node);
 		kmem_cache_free(sctp_bucket_cachep, pp);
 		SCTP_DBG_OBJCNT_DEC(bind_bucket);
 	}
@@ -6455,6 +6451,8 @@
 }
 
 
+DEFINE_PROTO_INUSE(sctp)
+
 /* This proto struct describes the ULP interface for SCTP.  */
 struct proto sctp_prot = {
 	.name        =	"SCTP",
@@ -6483,9 +6481,12 @@
 	.memory_pressure = &sctp_memory_pressure,
 	.enter_memory_pressure = sctp_enter_memory_pressure,
 	.memory_allocated = &sctp_memory_allocated,
+	REF_PROTO_INUSE(sctp)
 };
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+DEFINE_PROTO_INUSE(sctpv6)
+
 struct proto sctpv6_prot = {
 	.name		= "SCTPv6",
 	.owner		= THIS_MODULE,
@@ -6513,5 +6514,6 @@
 	.memory_pressure = &sctp_memory_pressure,
 	.enter_memory_pressure = sctp_enter_memory_pressure,
 	.memory_allocated = &sctp_memory_allocated,
+	REF_PROTO_INUSE(sctpv6)
 };
 #endif /* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 0669778..da4f157 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -263,6 +263,15 @@
 		.proc_handler	= &proc_dointvec,
 		.strategy	= &sysctl_intvec
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "addip_noauth_enable",
+		.data		= &sctp_addip_noauth,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+		.strategy	= &sysctl_intvec
+	},
 	{ .ctl_name = 0 }
 };
 
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index 5f467c9..d55ce83 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -74,8 +74,8 @@
 	 * given destination transport address, set RTO to the protocol
 	 * parameter 'RTO.Initial'.
 	 */
+	peer->last_rto = peer->rto = msecs_to_jiffies(sctp_rto_initial);
 	peer->rtt = 0;
-	peer->rto = msecs_to_jiffies(sctp_rto_initial);
 	peer->rttvar = 0;
 	peer->srtt = 0;
 	peer->rto_pending = 0;
@@ -385,6 +385,7 @@
 		tp->rto = tp->asoc->rto_max;
 
 	tp->rtt = rtt;
+	tp->last_rto = tp->rto;
 
 	/* Reset rto_pending so that a new RTT measurement is started when a
 	 * new data chunk is sent.
@@ -578,7 +579,7 @@
 	 */
 	t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380));
 	t->ssthresh = asoc->peer.i.a_rwnd;
-	t->rto = asoc->rto_initial;
+	t->last_rto = t->rto = asoc->rto_initial;
 	t->rtt = 0;
 	t->srtt = 0;
 	t->rttvar = 0;
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index 4be92d0..4908041 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -862,7 +862,7 @@
 			continue;
 
 		/* see if this ssn has been marked by skipping */
-		if (!SSN_lt(cssn, sctp_ssn_peek(in, csid)))
+		if (!SSN_lte(cssn, sctp_ssn_peek(in, csid)))
 			break;
 
 		__skb_unlink(pos, &ulpq->lobby);
diff --git a/net/socket.c b/net/socket.c
index 5d879fd..74784df 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2319,6 +2319,11 @@
 	return err;
 }
 
+int kernel_sock_shutdown(struct socket *sock, enum sock_shutdown_cmd how)
+{
+	return sock->ops->shutdown(sock, how);
+}
+
 /* ABI emulation layers need these two */
 EXPORT_SYMBOL(move_addr_to_kernel);
 EXPORT_SYMBOL(move_addr_to_user);
@@ -2345,3 +2350,4 @@
 EXPORT_SYMBOL(kernel_setsockopt);
 EXPORT_SYMBOL(kernel_sendpage);
 EXPORT_SYMBOL(kernel_sock_ioctl);
+EXPORT_SYMBOL(kernel_sock_shutdown);
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index dc55cc9..1afeb3e 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -320,9 +320,9 @@
 	xprt->slot = kcalloc(xprt->max_reqs,
 				sizeof(struct rpc_rqst), GFP_KERNEL);
 	if (xprt->slot == NULL) {
-		kfree(xprt);
 		dprintk("RPC:       %s: couldn't allocate %d slots\n",
 			__func__, xprt->max_reqs);
+		kfree(xprt);
 		return ERR_PTR(-ENOMEM);
 	}
 
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 515e7a6..e835da8 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -457,7 +457,7 @@
 	 *	  What the above comment does talk about? --ANK(980817)
 	 */
 
-	if (atomic_read(&unix_tot_inflight))
+	if (unix_tot_inflight)
 		unix_gc();		/* Garbage collect fds */
 
 	return 0;
@@ -599,15 +599,14 @@
 	struct sock *sk = NULL;
 	struct unix_sock *u;
 
-	if (atomic_read(&unix_nr_socks) >= 2*get_max_files())
+	atomic_inc(&unix_nr_socks);
+	if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
 		goto out;
 
 	sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto);
 	if (!sk)
 		goto out;
 
-	atomic_inc(&unix_nr_socks);
-
 	sock_init_data(sock,sk);
 	lockdep_set_class(&sk->sk_receive_queue.lock,
 				&af_unix_sk_receive_queue_lock_key);
@@ -625,6 +624,8 @@
 	init_waitqueue_head(&u->peer_wait);
 	unix_insert_socket(unix_sockets_unbound, sk);
 out:
+	if (sk == NULL)
+		atomic_dec(&unix_nr_socks);
 	return sk;
 }
 
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 406b643..ebdff3d 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -92,7 +92,7 @@
 static LIST_HEAD(gc_candidates);
 static DEFINE_SPINLOCK(unix_gc_lock);
 
-atomic_t unix_tot_inflight = ATOMIC_INIT(0);
+unsigned int unix_tot_inflight;
 
 
 static struct sock *unix_get_socket(struct file *filp)
@@ -133,7 +133,7 @@
 		} else {
 			BUG_ON(list_empty(&u->link));
 		}
-		atomic_inc(&unix_tot_inflight);
+		unix_tot_inflight++;
 		spin_unlock(&unix_gc_lock);
 	}
 }
@@ -147,7 +147,7 @@
 		BUG_ON(list_empty(&u->link));
 		if (atomic_dec_and_test(&u->inflight))
 			list_del_init(&u->link);
-		atomic_dec(&unix_tot_inflight);
+		unix_tot_inflight--;
 		spin_unlock(&unix_gc_lock);
 	}
 }
@@ -161,7 +161,7 @@
 	for (skb = sock_queue_head(sk)->next, next = skb->next; \
 	     skb != sock_queue_head(sk); skb = next, next = skb->next)
 
-static void scan_inflight(struct sock *x, void (*func)(struct sock *),
+static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *),
 			  struct sk_buff_head *hitlist)
 {
 	struct sk_buff *skb;
@@ -185,9 +185,9 @@
 				 *	if it indeed does so
 				 */
 				struct sock *sk = unix_get_socket(*fp++);
-				if(sk) {
+				if (sk) {
 					hit = true;
-					func(sk);
+					func(unix_sk(sk));
 				}
 			}
 			if (hit && hitlist != NULL) {
@@ -199,7 +199,7 @@
 	spin_unlock(&x->sk_receive_queue.lock);
 }
 
-static void scan_children(struct sock *x, void (*func)(struct sock *),
+static void scan_children(struct sock *x, void (*func)(struct unix_sock *),
 			  struct sk_buff_head *hitlist)
 {
 	if (x->sk_state != TCP_LISTEN)
@@ -235,20 +235,18 @@
 	}
 }
 
-static void dec_inflight(struct sock *sk)
+static void dec_inflight(struct unix_sock *usk)
 {
-	atomic_dec(&unix_sk(sk)->inflight);
+	atomic_dec(&usk->inflight);
 }
 
-static void inc_inflight(struct sock *sk)
+static void inc_inflight(struct unix_sock *usk)
 {
-	atomic_inc(&unix_sk(sk)->inflight);
+	atomic_inc(&usk->inflight);
 }
 
-static void inc_inflight_move_tail(struct sock *sk)
+static void inc_inflight_move_tail(struct unix_sock *u)
 {
-	struct unix_sock *u = unix_sk(sk);
-
 	atomic_inc(&u->inflight);
 	/*
 	 * If this is still a candidate, move it to the end of the
diff --git a/samples/markers/marker-example.c b/samples/markers/marker-example.c
index e787c6d..05e438f 100644
--- a/samples/markers/marker-example.c
+++ b/samples/markers/marker-example.c
@@ -19,7 +19,8 @@
 {
 	int i;
 
-	trace_mark(subsystem_event, "%d %s", 123, "example string");
+	trace_mark(subsystem_event, "integer %d string %s", 123,
+		"example string");
 	for (i = 0; i < 10; i++)
 		trace_mark(subsystem_eventb, MARK_NOARGS);
 	return -EPERM;
diff --git a/samples/markers/probe-example.c b/samples/markers/probe-example.c
index 238b2e3..a367975 100644
--- a/samples/markers/probe-example.c
+++ b/samples/markers/probe-example.c
@@ -53,7 +53,7 @@
 static struct probe_data probe_array[] =
 {
 	{	.name = "subsystem_event",
-		.format = "%d %s",
+		.format = "integer %d string %s",
 		.probe_func = probe_subsystem_event },
 	{	.name = "subsystem_eventb",
 		.format = MARK_NOARGS,
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 5959412..1ad6f7f 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -4,12 +4,7 @@
 
 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
-# If a arch/$(SRCARCH)/Kconfig.$(ARCH) file exist use it
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/Kconfig.$(ARCH)),)
-        Kconfig := arch/$(SRCARCH)/Kconfig.$(ARCH)
-else
-        Kconfig := arch/$(SRCARCH)/Kconfig
-endif
+Kconfig := arch/$(SRCARCH)/Kconfig
 
 xconfig: $(obj)/qconf
 	$< $(Kconfig)
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index b2913e9..e0f402f 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -83,6 +83,68 @@
 	return name;
 }
 
+static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
+{
+	char *p2;
+
+	switch (sym->type) {
+	case S_TRISTATE:
+		if (p[0] == 'm') {
+			sym->def[def].tri = mod;
+			sym->flags |= def_flags;
+			break;
+		}
+	case S_BOOLEAN:
+		if (p[0] == 'y') {
+			sym->def[def].tri = yes;
+			sym->flags |= def_flags;
+			break;
+		}
+		if (p[0] == 'n') {
+			sym->def[def].tri = no;
+			sym->flags |= def_flags;
+			break;
+		}
+		conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+		break;
+	case S_OTHER:
+		if (*p != '"') {
+			for (p2 = p; *p2 && !isspace(*p2); p2++)
+				;
+			sym->type = S_STRING;
+			goto done;
+		}
+	case S_STRING:
+		if (*p++ != '"')
+			break;
+		for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
+			if (*p2 == '"') {
+				*p2 = 0;
+				break;
+			}
+			memmove(p2, p2 + 1, strlen(p2));
+		}
+		if (!p2) {
+			conf_warning("invalid string found");
+			return 1;
+		}
+	case S_INT:
+	case S_HEX:
+	done:
+		if (sym_string_valid(sym, p)) {
+			sym->def[def].val = strdup(p);
+			sym->flags |= def_flags;
+		} else {
+			conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+			return 1;
+		}
+		break;
+	default:
+		;
+	}
+	return 0;
+}
+
 int conf_read_simple(const char *name, int def)
 {
 	FILE *in = NULL;
@@ -213,61 +275,8 @@
 				conf_warning("trying to reassign symbol %s", sym->name);
 				break;
 			}
-			switch (sym->type) {
-			case S_TRISTATE:
-				if (p[0] == 'm') {
-					sym->def[def].tri = mod;
-					sym->flags |= def_flags;
-					break;
-				}
-			case S_BOOLEAN:
-				if (p[0] == 'y') {
-					sym->def[def].tri = yes;
-					sym->flags |= def_flags;
-					break;
-				}
-				if (p[0] == 'n') {
-					sym->def[def].tri = no;
-					sym->flags |= def_flags;
-					break;
-				}
-				conf_warning("symbol value '%s' invalid for %s", p, sym->name);
-				break;
-			case S_OTHER:
-				if (*p != '"') {
-					for (p2 = p; *p2 && !isspace(*p2); p2++)
-						;
-					sym->type = S_STRING;
-					goto done;
-				}
-			case S_STRING:
-				if (*p++ != '"')
-					break;
-				for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
-					if (*p2 == '"') {
-						*p2 = 0;
-						break;
-					}
-					memmove(p2, p2 + 1, strlen(p2));
-				}
-				if (!p2) {
-					conf_warning("invalid string found");
-					continue;
-				}
-			case S_INT:
-			case S_HEX:
-			done:
-				if (sym_string_valid(sym, p)) {
-					sym->def[def].val = strdup(p);
-					sym->flags |= def_flags;
-				} else {
-					conf_warning("symbol value '%s' invalid for %s", p, sym->name);
-					continue;
-				}
-				break;
-			default:
-				;
-			}
+			if (conf_set_sym_val(sym, def, def_flags, p))
+				continue;
 			break;
 		case '\r':
 		case '\n':
diff --git a/security/commoncap.c b/security/commoncap.c
index bf67871..302e8d0 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -526,6 +526,10 @@
 	if (info != SEND_SIG_NOINFO && (is_si_special(info) || SI_FROMKERNEL(info)))
 		return 0;
 
+	/* sigcont is permitted within same session */
+	if (sig == SIGCONT && (task_session_nr(current) == task_session_nr(p)))
+		return 0;
+
 	if (secid)
 		/*
 		 * Signal sent as a particular user.
diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c
index 7551af1..9e70a16 100644
--- a/security/selinux/ss/avtab.c
+++ b/security/selinux/ss/avtab.c
@@ -325,7 +325,7 @@
 	AVTAB_MEMBER
 };
 
-int avtab_read_item(void *fp, u32 vers, struct avtab *a,
+int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 	            int (*insertf)(struct avtab *a, struct avtab_key *k,
 				   struct avtab_datum *d, void *p),
 		    void *p)
@@ -333,10 +333,11 @@
 	__le16 buf16[4];
 	u16 enabled;
 	__le32 buf32[7];
-	u32 items, items2, val;
+	u32 items, items2, val, vers = pol->policyvers;
 	struct avtab_key key;
 	struct avtab_datum datum;
 	int i, rc;
+	unsigned set;
 
 	memset(&key, 0, sizeof(struct avtab_key));
 	memset(&datum, 0, sizeof(struct avtab_datum));
@@ -420,12 +421,35 @@
 	key.target_class = le16_to_cpu(buf16[items++]);
 	key.specified = le16_to_cpu(buf16[items++]);
 
+	if (!policydb_type_isvalid(pol, key.source_type) ||
+	    !policydb_type_isvalid(pol, key.target_type) ||
+	    !policydb_class_isvalid(pol, key.target_class)) {
+		printk(KERN_WARNING "security: avtab: invalid type or class\n");
+		return -1;
+	}
+
+	set = 0;
+	for (i = 0; i < ARRAY_SIZE(spec_order); i++) {
+		if (key.specified & spec_order[i])
+			set++;
+	}
+	if (!set || set > 1) {
+		printk(KERN_WARNING
+			"security:  avtab:  more than one specifier\n");
+		return -1;
+	}
+
 	rc = next_entry(buf32, fp, sizeof(u32));
 	if (rc < 0) {
 		printk("security: avtab: truncated entry\n");
 		return -1;
 	}
 	datum.data = le32_to_cpu(*buf32);
+	if ((key.specified & AVTAB_TYPE) &&
+	    !policydb_type_isvalid(pol, datum.data)) {
+		printk(KERN_WARNING "security: avtab: invalid type\n");
+		return -1;
+	}
 	return insertf(a, &key, &datum, p);
 }
 
@@ -435,7 +459,7 @@
 	return avtab_insert(a, k, d);
 }
 
-int avtab_read(struct avtab *a, void *fp, u32 vers)
+int avtab_read(struct avtab *a, void *fp, struct policydb *pol)
 {
 	int rc;
 	__le32 buf[1];
@@ -459,7 +483,7 @@
 		goto bad;
 
 	for (i = 0; i < nel; i++) {
-		rc = avtab_read_item(fp,vers, a, avtab_insertf, NULL);
+		rc = avtab_read_item(a, fp, pol, avtab_insertf, NULL);
 		if (rc) {
 			if (rc == -ENOMEM)
 				printk(KERN_ERR "security: avtab: out of memory\n");
diff --git a/security/selinux/ss/avtab.h b/security/selinux/ss/avtab.h
index d8edf8c..8da6a84 100644
--- a/security/selinux/ss/avtab.h
+++ b/security/selinux/ss/avtab.h
@@ -64,12 +64,13 @@
 void avtab_destroy(struct avtab *h);
 void avtab_hash_eval(struct avtab *h, char *tag);
 
-int avtab_read_item(void *fp, uint32_t vers, struct avtab *a,
+struct policydb;
+int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
 		    int (*insert)(struct avtab *a, struct avtab_key *k,
 				  struct avtab_datum *d, void *p),
 		    void *p);
 
-int avtab_read(struct avtab *a, void *fp, u32 vers);
+int avtab_read(struct avtab *a, void *fp, struct policydb *pol);
 
 struct avtab_node *avtab_insert_nonunique(struct avtab *h, struct avtab_key *key,
 					  struct avtab_datum *datum);
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 45b93a8..50ad85d 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -362,7 +362,8 @@
 	data.head = NULL;
 	data.tail = NULL;
 	for (i = 0; i < len; i++) {
-		rc = avtab_read_item(fp, p->policyvers, &p->te_cond_avtab, cond_insertf, &data);
+		rc = avtab_read_item(&p->te_cond_avtab, fp, p, cond_insertf,
+				     &data);
 		if (rc)
 			return rc;
 
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index c1a6b22..920b5e3 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -129,8 +129,8 @@
 			cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
 			c_iter->bitmap[cmap_idx]
 				|= e_iter->maps[cmap_idx] << cmap_sft;
-			e_iter = e_iter->next;
 		}
+		e_iter = e_iter->next;
 	}
 
 	return 0;
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index 9a11dea..fb5d70a 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -157,49 +157,55 @@
 	return;
 }
 
+int mls_level_isvalid(struct policydb *p, struct mls_level *l)
+{
+	struct level_datum *levdatum;
+	struct ebitmap_node *node;
+	int i;
+
+	if (!l->sens || l->sens > p->p_levels.nprim)
+		return 0;
+	levdatum = hashtab_search(p->p_levels.table,
+				  p->p_sens_val_to_name[l->sens - 1]);
+	if (!levdatum)
+		return 0;
+
+	ebitmap_for_each_positive_bit(&l->cat, node, i) {
+		if (i > p->p_cats.nprim)
+			return 0;
+		if (!ebitmap_get_bit(&levdatum->level->cat, i)) {
+			/*
+			 * Category may not be associated with
+			 * sensitivity.
+			 */
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+int mls_range_isvalid(struct policydb *p, struct mls_range *r)
+{
+	return (mls_level_isvalid(p, &r->level[0]) &&
+		mls_level_isvalid(p, &r->level[1]) &&
+		mls_level_dom(&r->level[1], &r->level[0]));
+}
+
 /*
  * Return 1 if the MLS fields in the security context
  * structure `c' are valid.  Return 0 otherwise.
  */
 int mls_context_isvalid(struct policydb *p, struct context *c)
 {
-	struct level_datum *levdatum;
 	struct user_datum *usrdatum;
-	struct ebitmap_node *node;
-	int i, l;
 
 	if (!selinux_mls_enabled)
 		return 1;
 
-	/*
-	 * MLS range validity checks: high must dominate low, low level must
-	 * be valid (category set <-> sensitivity check), and high level must
-	 * be valid (category set <-> sensitivity check)
-	 */
-	if (!mls_level_dom(&c->range.level[1], &c->range.level[0]))
-		/* High does not dominate low. */
+	if (!mls_range_isvalid(p, &c->range))
 		return 0;
 
-	for (l = 0; l < 2; l++) {
-		if (!c->range.level[l].sens || c->range.level[l].sens > p->p_levels.nprim)
-			return 0;
-		levdatum = hashtab_search(p->p_levels.table,
-			p->p_sens_val_to_name[c->range.level[l].sens - 1]);
-		if (!levdatum)
-			return 0;
-
-		ebitmap_for_each_positive_bit(&c->range.level[l].cat, node, i) {
-			if (i > p->p_cats.nprim)
-				return 0;
-			if (!ebitmap_get_bit(&levdatum->level->cat, i))
-				/*
-				 * Category may not be associated with
-				 * sensitivity in low level.
-				 */
-				return 0;
-		}
-	}
-
 	if (c->role == OBJECT_R_VAL)
 		return 1;
 
diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h
index 096d1b4..ab53663 100644
--- a/security/selinux/ss/mls.h
+++ b/security/selinux/ss/mls.h
@@ -27,6 +27,8 @@
 int mls_compute_context_len(struct context *context);
 void mls_sid_to_context(struct context *context, char **scontext);
 int mls_context_isvalid(struct policydb *p, struct context *c);
+int mls_range_isvalid(struct policydb *p, struct mls_range *r);
+int mls_level_isvalid(struct policydb *p, struct mls_level *l);
 
 int mls_context_to_sid(char oldc,
 	               char **scontext,
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 539828b..b582aae 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -713,6 +713,27 @@
 	return rc;
 }
 
+int policydb_class_isvalid(struct policydb *p, unsigned int class)
+{
+	if (!class || class > p->p_classes.nprim)
+		return 0;
+	return 1;
+}
+
+int policydb_role_isvalid(struct policydb *p, unsigned int role)
+{
+	if (!role || role > p->p_roles.nprim)
+		return 0;
+	return 1;
+}
+
+int policydb_type_isvalid(struct policydb *p, unsigned int type)
+{
+	if (!type || type > p->p_types.nprim)
+		return 0;
+	return 1;
+}
+
 /*
  * Return 1 if the fields in the security context
  * structure `c' are valid.  Return 0 otherwise.
@@ -1260,6 +1281,7 @@
 		       "categories\n");
 		goto bad;
 	}
+
 	return 0;
 
 bad:
@@ -1563,7 +1585,7 @@
 		p->symtab[i].nprim = nprim;
 	}
 
-	rc = avtab_read(&p->te_avtab, fp, p->policyvers);
+	rc = avtab_read(&p->te_avtab, fp, p);
 	if (rc)
 		goto bad;
 
@@ -1595,6 +1617,12 @@
 		tr->role = le32_to_cpu(buf[0]);
 		tr->type = le32_to_cpu(buf[1]);
 		tr->new_role = le32_to_cpu(buf[2]);
+		if (!policydb_role_isvalid(p, tr->role) ||
+		    !policydb_type_isvalid(p, tr->type) ||
+		    !policydb_role_isvalid(p, tr->new_role)) {
+			rc = -EINVAL;
+			goto bad;
+		}
 		ltr = tr;
 	}
 
@@ -1619,6 +1647,11 @@
 			goto bad;
 		ra->role = le32_to_cpu(buf[0]);
 		ra->new_role = le32_to_cpu(buf[1]);
+		if (!policydb_role_isvalid(p, ra->role) ||
+		    !policydb_role_isvalid(p, ra->new_role)) {
+			rc = -EINVAL;
+			goto bad;
+		}
 		lra = ra;
 	}
 
@@ -1872,9 +1905,19 @@
 				rt->target_class = le32_to_cpu(buf[0]);
 			} else
 				rt->target_class = SECCLASS_PROCESS;
+			if (!policydb_type_isvalid(p, rt->source_type) ||
+			    !policydb_type_isvalid(p, rt->target_type) ||
+			    !policydb_class_isvalid(p, rt->target_class)) {
+				rc = -EINVAL;
+				goto bad;
+			}
 			rc = mls_read_range_helper(&rt->target_range, fp);
 			if (rc)
 				goto bad;
+			if (!mls_range_isvalid(p, &rt->target_range)) {
+				printk(KERN_WARNING "security:  rangetrans:  invalid range\n");
+				goto bad;
+			}
 			lrt = rt;
 		}
 	}
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 844d310..ed6fc68 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -251,6 +251,9 @@
 extern void policydb_destroy(struct policydb *p);
 extern int policydb_load_isids(struct policydb *p, struct sidtab *s);
 extern int policydb_context_isvalid(struct policydb *p, struct context *c);
+extern int policydb_class_isvalid(struct policydb *p, unsigned int class);
+extern int policydb_type_isvalid(struct policydb *p, unsigned int type);
+extern int policydb_role_isvalid(struct policydb *p, unsigned int role);
 extern int policydb_read(struct policydb *p, void *fp);
 
 #define PERM_SYMTAB_SIZE 32
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 36a191e..e076039 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -211,26 +211,27 @@
 	if (uctx->ctx_doi != XFRM_SC_ALG_SELINUX)
 		return -EINVAL;
 
-	if (uctx->ctx_len >= PAGE_SIZE)
+	str_len = uctx->ctx_len;
+	if (str_len >= PAGE_SIZE)
 		return -ENOMEM;
 
 	*ctxp = ctx = kmalloc(sizeof(*ctx) +
-			      uctx->ctx_len + 1,
+			      str_len + 1,
 			      GFP_KERNEL);
 
 	if (!ctx)
 		return -ENOMEM;
 
 	ctx->ctx_doi = uctx->ctx_doi;
-	ctx->ctx_len = uctx->ctx_len;
+	ctx->ctx_len = str_len;
 	ctx->ctx_alg = uctx->ctx_alg;
 
 	memcpy(ctx->ctx_str,
 	       uctx+1,
-	       ctx->ctx_len);
-	ctx->ctx_str[ctx->ctx_len] = 0;
+	       str_len);
+	ctx->ctx_str[str_len] = 0;
 	rc = security_context_to_sid(ctx->ctx_str,
-				     ctx->ctx_len,
+				     str_len,
 				     &ctx->ctx_sid);
 
 	if (rc)