drivers/media/dvb/b2c2/flexcop-i2c.c - fp2-dev/kernel/msm - Gitiles

 /*
  * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
  *
  * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
  *
  * see flexcop.c for copyright information.
  */
 #include "flexcop.h"

 #define FC_MAX_I2C_RETRIES 100000

 /* #define DUMP_I2C_MESSAGES */

 static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
 {
 	int i;
 	flexcop_ibi_value r;

 	r100->tw_sm_c_100.working_start = 1;
 	deb_i2c("r100 before: %08x\n",r100->raw);

 	fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
 	fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */

 	for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
 		r = fc->read_ibi_reg(fc, tw_sm_c_100);

 		if (!r.tw_sm_c_100.no_base_addr_ack_error) {
 			if (r.tw_sm_c_100.st_done) {  /* && !r.tw_sm_c_100.working_start */
 				*r100 = r;
 				deb_i2c("i2c success\n");
 				return 0;
 			}
 		} else {
 			deb_i2c("suffering from an i2c ack_error\n");
 			return -EREMOTEIO;
 		}
 	}
 	deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
 	return -EREMOTEIO;
 }

 static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
 	flexcop_ibi_value r100, u8 *buf)
 {
 	flexcop_ibi_value r104;
 	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
 		ret;

 	r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
 	ret = flexcop_i2c_operation(i2c->fc, &r100);
 	if (ret != 0) {
 		deb_i2c("read failed. %d\n", ret);
 		return ret;
 	}

 	buf[0] = r100.tw_sm_c_100.data1_reg;

 	if (len > 0) {
 		r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
 		deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);

 		/* there is at least one more byte, otherwise we wouldn't be here */
 		buf[1] = r104.tw_sm_c_104.data2_reg;
 		if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
 		if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
 	}

 	return 0;
 }

 static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
 {
 	flexcop_ibi_value r104;
 	int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
 	r104.raw = 0;

 	/* there is at least one byte, otherwise we wouldn't be here */
 	r100.tw_sm_c_100.data1_reg = buf[0];

 	r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
 	r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
 	r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;

 	deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);

 	/* write the additional i2c data before doing the actual i2c operation */
 	fc->write_ibi_reg(fc, tw_sm_c_104, r104);
 	return flexcop_i2c_operation(fc, &r100);
 }

 int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
 	flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
 {
 	int ret;

 #ifdef DUMP_I2C_MESSAGES
 	int i;
 #endif

 	u16 bytes_to_transfer;
 	flexcop_ibi_value r100;

 	deb_i2c("op = %d\n",op);
 	r100.raw = 0;
 	r100.tw_sm_c_100.chipaddr = chipaddr;
 	r100.tw_sm_c_100.twoWS_rw = op;
 	r100.tw_sm_c_100.twoWS_port_reg = i2c->port;

 #ifdef DUMP_I2C_MESSAGES
 	printk(KERN_DEBUG "%d ", i2c->port);
 	if (op == FC_READ)
 		printk("rd(");
 	else
 		printk("wr(");

 	printk("%02x): %02x ", chipaddr, addr);
 #endif

 	/* in that case addr is the only value ->
 	 * we write it twice as baseaddr and val0
 	 * BBTI is doing it like that for ISL6421 at least */
 	if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
 		buf = &addr;
 		len = 1;
 	}

 	while (len != 0) {
 		bytes_to_transfer = len > 4 ? 4 : len;

 		r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
 		r100.tw_sm_c_100.baseaddr = addr;

 		if (op == FC_READ)
 			ret = flexcop_i2c_read4(i2c, r100, buf);
 		else
 			ret = flexcop_i2c_write4(i2c->fc, r100, buf);

 #ifdef DUMP_I2C_MESSAGES
 		for (i = 0; i < bytes_to_transfer; i++)
 			printk("%02x ", buf[i]);
 #endif

 		if (ret < 0)
 			return ret;

 		buf  += bytes_to_transfer;
 		addr += bytes_to_transfer;
 		len  -= bytes_to_transfer;
 	}

 #ifdef DUMP_I2C_MESSAGES
 	printk("\n");
 #endif

 	return 0;
 }
 /* exported for PCI i2c */
 EXPORT_SYMBOL(flexcop_i2c_request);

 /* master xfer callback for demodulator */
 static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
 {
 	struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
 	int i, ret = 0;

 	/* Some drivers use 1 byte or 0 byte reads as probes, which this
 	 * driver doesn't support.  These probes will always fail, so this
 	 * hack makes them always succeed.  If one knew how, it would of
 	 * course be better to actually do the read.  */
 	if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
 		return 1;

 	if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
 		return -ERESTARTSYS;

 	for (i = 0; i < num; i++) {
 		/* reading */
 		if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
 			ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
 				msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
 			i++; /* skip the following message */
 		} else /* writing */
 			ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
 				msgs[i].buf[0], &msgs[i].buf[1],
 				msgs[i].len - 1);
 		if (ret < 0) {
 			err("i2c master_xfer failed");
 			break;
 		}
 	}

 	mutex_unlock(&i2c->fc->i2c_mutex);

 	if (ret == 0)
 		ret = num;
 	return ret;
 }

 static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C;
 }

 static struct i2c_algorithm flexcop_algo = {
 	.master_xfer	= flexcop_master_xfer,
 	.functionality	= flexcop_i2c_func,
 };

 int flexcop_i2c_init(struct flexcop_device *fc)
 {
 	int ret;

 	mutex_init(&fc->i2c_mutex);

 	fc->fc_i2c_adap[0].fc = fc;
 	fc->fc_i2c_adap[1].fc = fc;
 	fc->fc_i2c_adap[2].fc = fc;

 	fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
 	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
 	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;

 	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
 		sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
 	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
 		sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
 	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
 		sizeof(fc->fc_i2c_adap[2].i2c_adap.name));

 	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);

 	fc->fc_i2c_adap[0].i2c_adap.class =
 		fc->fc_i2c_adap[1].i2c_adap.class =
 		fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL;
 	fc->fc_i2c_adap[0].i2c_adap.algo =
 		fc->fc_i2c_adap[1].i2c_adap.algo =
 		fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
 	fc->fc_i2c_adap[0].i2c_adap.algo_data =
 		fc->fc_i2c_adap[1].i2c_adap.algo_data =
 		fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
 	fc->fc_i2c_adap[0].i2c_adap.dev.parent =
 		fc->fc_i2c_adap[1].i2c_adap.dev.parent =
 		fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;

 	ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
 	if (ret < 0)
 		return ret;

 	ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
 	if (ret < 0)
 		goto adap_1_failed;

 	ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
 	if (ret < 0)
 		goto adap_2_failed;

 	fc->init_state |= FC_STATE_I2C_INIT;
 	return 0;

 adap_2_failed:
 	i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
 adap_1_failed:
 	i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);

 	return ret;
 }

 void flexcop_i2c_exit(struct flexcop_device *fc)
 {
 	if (fc->init_state & FC_STATE_I2C_INIT) {
 		i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
 		i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
 		i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
 	}

 	fc->init_state &= ~FC_STATE_I2C_INIT;
 }
	/*
	* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
	*
	* flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
	*
	* see flexcop.c for copyright information.
	*/
	#include "flexcop.h"

	#define FC_MAX_I2C_RETRIES 100000

	/* #define DUMP_I2C_MESSAGES */

	static int flexcop_i2c_operation(struct flexcop_device fc, flexcop_ibi_value r100)
	{
	int i;
	flexcop_ibi_value r;

	r100->tw_sm_c_100.working_start = 1;
	deb_i2c("r100 before: %08x\n",r100->raw);

	fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
	fc->write_ibi_reg(fc, tw_sm_c_100, r100); / initiating i2c operation */

	for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
	r = fc->read_ibi_reg(fc, tw_sm_c_100);

	if (!r.tw_sm_c_100.no_base_addr_ack_error) {
	if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */
	*r100 = r;
	deb_i2c("i2c success\n");
	return 0;
	}
	} else {
	deb_i2c("suffering from an i2c ack_error\n");
	return -EREMOTEIO;
	}
	}
	deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
	return -EREMOTEIO;
	}

	static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
	flexcop_ibi_value r100, u8 *buf)
	{
	flexcop_ibi_value r104;
	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
	ret;

	r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
	ret = flexcop_i2c_operation(i2c->fc, &r100);
	if (ret != 0) {
	deb_i2c("read failed. %d\n", ret);
	return ret;
	}

	buf[0] = r100.tw_sm_c_100.data1_reg;

	if (len > 0) {
	r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
	deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);

	/* there is at least one more byte, otherwise we wouldn't be here */
	buf[1] = r104.tw_sm_c_104.data2_reg;
	if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
	if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
	}

	return 0;
	}

	static int flexcop_i2c_write4(struct flexcop_device fc, flexcop_ibi_value r100, u8 buf)
	{
	flexcop_ibi_value r104;
	int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
	r104.raw = 0;

	/* there is at least one byte, otherwise we wouldn't be here */
	r100.tw_sm_c_100.data1_reg = buf[0];

	r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
	r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
	r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;

	deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);

	/* write the additional i2c data before doing the actual i2c operation */
	fc->write_ibi_reg(fc, tw_sm_c_104, r104);
	return flexcop_i2c_operation(fc, &r100);
	}

	int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
	flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
	{
	int ret;

	#ifdef DUMP_I2C_MESSAGES
	int i;
	#endif

	u16 bytes_to_transfer;
	flexcop_ibi_value r100;

	deb_i2c("op = %d\n",op);
	r100.raw = 0;
	r100.tw_sm_c_100.chipaddr = chipaddr;
	r100.tw_sm_c_100.twoWS_rw = op;
	r100.tw_sm_c_100.twoWS_port_reg = i2c->port;

	#ifdef DUMP_I2C_MESSAGES
	printk(KERN_DEBUG "%d ", i2c->port);
	if (op == FC_READ)
	printk("rd(");
	else
	printk("wr(");

	printk("%02x): %02x ", chipaddr, addr);
	#endif

	/* in that case addr is the only value ->
	* we write it twice as baseaddr and val0
	* BBTI is doing it like that for ISL6421 at least */
	if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
	buf = &addr;
	len = 1;
	}

	while (len != 0) {
	bytes_to_transfer = len > 4 ? 4 : len;

	r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
	r100.tw_sm_c_100.baseaddr = addr;

	if (op == FC_READ)
	ret = flexcop_i2c_read4(i2c, r100, buf);
	else
	ret = flexcop_i2c_write4(i2c->fc, r100, buf);

	#ifdef DUMP_I2C_MESSAGES
	for (i = 0; i < bytes_to_transfer; i++)
	printk("%02x ", buf[i]);
	#endif

	if (ret < 0)
	return ret;

	buf += bytes_to_transfer;
	addr += bytes_to_transfer;
	len -= bytes_to_transfer;
	}

	#ifdef DUMP_I2C_MESSAGES
	printk("\n");
	#endif

	return 0;
	}
	/* exported for PCI i2c */
	EXPORT_SYMBOL(flexcop_i2c_request);

	/* master xfer callback for demodulator */
	static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
	{
	struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
	int i, ret = 0;

	/* Some drivers use 1 byte or 0 byte reads as probes, which this
	* driver doesn't support. These probes will always fail, so this
	* hack makes them always succeed. If one knew how, it would of
	* course be better to actually do the read. */
	if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
	return 1;

	if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
	return -ERESTARTSYS;

	for (i = 0; i < num; i++) {
	/* reading */
	if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
	ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
	msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
	i++; /* skip the following message */
	} else /* writing */
	ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
	msgs[i].buf[0], &msgs[i].buf[1],
	msgs[i].len - 1);
	if (ret < 0) {
	err("i2c master_xfer failed");
	break;
	}
	}

	mutex_unlock(&i2c->fc->i2c_mutex);

	if (ret == 0)
	ret = num;
	return ret;
	}

	static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
	{
	return I2C_FUNC_I2C;
	}

	static struct i2c_algorithm flexcop_algo = {
	.master_xfer = flexcop_master_xfer,
	.functionality = flexcop_i2c_func,
	};

	int flexcop_i2c_init(struct flexcop_device *fc)
	{
	int ret;

	mutex_init(&fc->i2c_mutex);

	fc->fc_i2c_adap[0].fc = fc;
	fc->fc_i2c_adap[1].fc = fc;
	fc->fc_i2c_adap[2].fc = fc;

	fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;

	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
	sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
	sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
	sizeof(fc->fc_i2c_adap[2].i2c_adap.name));

	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
	i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);

	fc->fc_i2c_adap[0].i2c_adap.class =
	fc->fc_i2c_adap[1].i2c_adap.class =
	fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL;
	fc->fc_i2c_adap[0].i2c_adap.algo =
	fc->fc_i2c_adap[1].i2c_adap.algo =
	fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
	fc->fc_i2c_adap[0].i2c_adap.algo_data =
	fc->fc_i2c_adap[1].i2c_adap.algo_data =
	fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
	fc->fc_i2c_adap[0].i2c_adap.dev.parent =
	fc->fc_i2c_adap[1].i2c_adap.dev.parent =
	fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;

	ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
	if (ret < 0)
	return ret;

	ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
	if (ret < 0)
	goto adap_1_failed;

	ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
	if (ret < 0)
	goto adap_2_failed;

	fc->init_state \|= FC_STATE_I2C_INIT;
	return 0;

	adap_2_failed:
	i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
	adap_1_failed:
	i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);

	return ret;
	}

	void flexcop_i2c_exit(struct flexcop_device *fc)
	{
	if (fc->init_state & FC_STATE_I2C_INIT) {
	i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
	i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
	i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
	}

	fc->init_state &= ~FC_STATE_I2C_INIT;
	}