USB: UB: Let cdrecord to see a device with media absent
The command "cdrecord dev=/dev/uba x.iso" prints nasty garbage if a blank
is not in the drive. This happens because drivers have to set req->errors
separately from just returning zero uptodate with end_that_request_first,
end_that_request_last. These functions only set error in BIO, but sg_io()
ignores it.
Since we're on it, let cdrecord access a device when ->changed is set.
It's useful if someone wants to know device capabilities without burning
anything.
Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index d62b49f..45a8f40 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -358,7 +358,7 @@
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct ub_request *urq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, int uptodate);
+static void ub_end_rq(struct request *rq, unsigned int status);
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
struct ub_request *urq, struct ub_scsi_cmd *cmd);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -639,9 +639,15 @@
struct ub_request *urq;
int n_elem;
- if (atomic_read(&sc->poison) || lun->changed) {
+ if (atomic_read(&sc->poison)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, 0);
+ ub_end_rq(rq, DID_NO_CONNECT << 16);
+ return 0;
+ }
+
+ if (lun->changed && !blk_pc_request(rq)) {
+ blkdev_dequeue_request(rq);
+ ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
return 0;
}
@@ -693,7 +699,7 @@
drop:
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, 0);
+ ub_end_rq(rq, DID_ERROR << 16);
return 0;
}
@@ -761,47 +767,53 @@
struct ub_lun *lun = cmd->lun;
struct ub_request *urq = cmd->back;
struct request *rq;
- int uptodate;
+ unsigned int scsi_status;
rq = urq->rq;
if (cmd->error == 0) {
- uptodate = 1;
-
if (blk_pc_request(rq)) {
if (cmd->act_len >= rq->data_len)
rq->data_len = 0;
else
rq->data_len -= cmd->act_len;
}
+ scsi_status = 0;
} else {
- uptodate = 0;
-
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
rq->sense_len = UB_SENSE_SIZE;
if (sc->top_sense[0] != 0)
- rq->errors = SAM_STAT_CHECK_CONDITION;
+ scsi_status = SAM_STAT_CHECK_CONDITION;
else
- rq->errors = DID_ERROR << 16;
+ scsi_status = DID_ERROR << 16;
} else {
if (cmd->error == -EIO) {
if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
return;
}
+ scsi_status = SAM_STAT_CHECK_CONDITION;
}
}
urq->rq = NULL;
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, uptodate);
+ ub_end_rq(rq, scsi_status);
blk_start_queue(lun->disk->queue);
}
-static void ub_end_rq(struct request *rq, int uptodate)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status)
{
+ int uptodate;
+
+ if (scsi_status == 0) {
+ uptodate = 1;
+ } else {
+ uptodate = 0;
+ rq->errors = scsi_status;
+ }
end_that_request_first(rq, uptodate, rq->hard_nr_sectors);
end_that_request_last(rq, uptodate);
}